arch/arm/boot/dts/msm-pm8841.dtsi

/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

&spmi_bus {
	#address-cells = <1>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <3>;

	qcom,pm8841@4 {
		spmi-slave-container;
		reg = <0x4>;
		#address-cells = <1>;
		#size-cells = <1>;

		qcom,qpnp-revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100 0x100>;
		};

		qcom,temp-alarm@2400 {
			compatible = "qcom,qpnp-temp-alarm";
			reg = <0x2400 0x100>;
			interrupts = <0x4 0x24 0x0>;
			label = "pm8841_tz";
			qcom,threshold-set = <0>;
			qcom,default-temp = <37000>;
		};

		pm8841_mpps: mpps {
			spmi-dev-container;
			compatible = "qcom,qpnp-pin";
			gpio-controller;
			#gpio-cells = <2>;
			#address-cells = <1>;
			#size-cells = <1>;
			label = "pm8841-mpp";

			mpp@a000 {
				reg = <0xa000 0x100>;
				qcom,pin-num = <1>;
			};

			mpp@a100 {
				reg = <0xa100 0x100>;
				qcom,pin-num = <2>;
			};

			mpp@a200 {
				reg = <0xa200 0x100>;
				qcom,pin-num = <3>;
			};

			mpp@a300 {
				reg = <0xa300 0x100>;
				qcom,pin-num = <4>;
			};
		};
	};

	qcom,pm8841@5 {
		spmi-slave-container;
		reg = <0x5>;
		#address-cells = <1>;
		#size-cells = <1>;

		regulator@1400 {
			regulator-name = "8841_s1";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x1400 0x300>;
			status = "disabled";

			qcom,ctl@1400 {
				reg = <0x1400 0x100>;
			};
			qcom,ps@1500 {
				reg = <0x1500 0x100>;
			};
			qcom,freq@1600 {
				reg = <0x1600 0x100>;
			};
		};

		regulator@1700 {
			regulator-name = "8841_s2";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x1700 0x300>;
			status = "disabled";
			qcom,force-type = <0x1c 0x08>;

			qcom,ctl@1700 {
				reg = <0x1700 0x100>;
			};
			qcom,ps@1800 {
				reg = <0x1800 0x100>;
			};
			qcom,freq@1900 {
				reg = <0x1900 0x100>;
			};
		};

		regulator@1a00 {
			regulator-name = "8841_s3";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x1a00 0x300>;
			status = "disabled";

			qcom,ctl@1a00 {
				reg = <0x1a00 0x100>;
			};
			qcom,ps@1b00 {
				reg = <0x1b00 0x100>;
			};
			qcom,freq@1c00 {
				reg = <0x1c00 0x100>;
			};
		};

		regulator@1d00 {
			regulator-name = "8841_s4";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x1d00 0x300>;
			status = "disabled";
			qcom,force-type = <0x1c 0x08>;

			qcom,ctl@1d00 {
				reg = <0x1d00 0x100>;
			};
			qcom,ps@1e00 {
				reg = <0x1e00 0x100>;
			};
			qcom,freq@1f00 {
				reg = <0x1f00 0x100>;
			};
		};

		regulator@2000 {
			regulator-name = "8841_s5";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x2000 0x300>;
			status = "disabled";
			qcom,force-type = <0x1c 0x08>;

			qcom,ctl@0 {
				reg = <0x2000 0x100>;
			};
			qcom,ps@100 {
				reg = <0x2100 0x100>;
			};
			qcom,freq@200 {
				reg = <0x2200 0x100>;
			};
		};

		regulator@2300 {
			regulator-name = "8841_s6";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x2300 0x300>;
			status = "disabled";
			qcom,force-type = <0x1c 0x08>;

			qcom,ctl@2300 {
				reg = <0x2300 0x100>;
			};
			qcom,ps@2400 {
				reg = <0x2400 0x100>;
			};
			qcom,freq@2500 {
				reg = <0x2500 0x100>;
			};
		};

		regulator@2600 {
			regulator-name = "8841_s7";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x2600 0x300>;
			status = "disabled";
			qcom,force-type = <0x1c 0x08>;

			qcom,ctl@2600 {
				reg = <0x2600 0x100>;
			};
			qcom,ps@2700 {
				reg = <0x2700 0x100>;
			};
			qcom,freq@2800 {
				reg = <0x2800 0x100>;
			};
		};

		regulator@2900 {
			regulator-name = "8841_s8";
			spmi-dev-container;
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "qcom,qpnp-regulator";
			reg = <0x2900 0x300>;
			status = "disabled";
			qcom,force-type = <0x1c 0x08>;

			qcom,ctl@2900 {
				reg = <0x2900 0x100>;
			};
			qcom,ps@2a000 {
				reg = <0x2a00 0x100>;
			};
			qcom,freq@2b00 {
				reg = <0x2b00 0x100>;
			};
		};
	};
};