| /* |
| * MPC8536 DS Device Tree Source |
| * |
| * Copyright 2008 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| model = "fsl,mpc8536ds"; |
| compatible = "fsl,mpc8536ds"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| pci2 = &pci2; |
| pci3 = &pci3; |
| }; |
| |
| cpus { |
| #cpus = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8536@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <00000000 00000000>; // Filled by U-Boot |
| }; |
| |
| soc@ffe00000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "simple-bus"; |
| ranges = <0x0 0xffe00000 0x100000>; |
| reg = <0xffe00000 0x1000>; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| memory-controller@2000 { |
| compatible = "fsl,mpc8536-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <18 0x2>; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,mpc8536-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 0x2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <43 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <43 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| rtc@68 { |
| compatible = "dallas,ds3232"; |
| reg = <0x68>; |
| interrupts = <0 0x1>; |
| interrupt-parent = <&mpic>; |
| }; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma"; |
| reg = <0x21300 4>; |
| ranges = <0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8536-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <14 0x2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8536-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <15 0x2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8536-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <16 0x2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8536-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <17 0x2>; |
| }; |
| }; |
| |
| mdio@24520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x24520 0x20>; |
| |
| phy0: ethernet-phy@0 { |
| interrupt-parent = <&mpic>; |
| interrupts = <10 0x1>; |
| reg = <0>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <10 0x1>; |
| reg = <1>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| usb@22000 { |
| compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; |
| reg = <0x22000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <28 0x2>; |
| phy_type = "ulpi"; |
| }; |
| |
| usb@23000 { |
| compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; |
| reg = <0x23000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <46 0x2>; |
| phy_type = "ulpi"; |
| }; |
| |
| enet0: ethernet@24000 { |
| cell-index = <0>; |
| device_type = "network"; |
| model = "TSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <29 2 30 2 34 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| enet1: ethernet@26000 { |
| cell-index = <1>; |
| device_type = "network"; |
| model = "TSEC"; |
| compatible = "gianfar"; |
| reg = <0x26000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <31 2 32 2 33 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| usb@2b000 { |
| compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; |
| reg = <0x2b000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <60 0x2>; |
| dr_mode = "peripheral"; |
| phy_type = "ulpi"; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4500 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x4600 0x100>; |
| clock-frequency = <0>; |
| interrupts = <42 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", |
| "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <45 2 58 2>; |
| interrupt-parent = <&mpic>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0x9fe>; |
| fsl,descriptor-types-mask = <0x3ab0ebf>; |
| }; |
| |
| sata@18000 { |
| compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; |
| reg = <0x18000 0x1000>; |
| cell-index = <1>; |
| interrupts = <74 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| sata@19000 { |
| compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; |
| reg = <0x19000 0x1000>; |
| cell-index = <2>; |
| interrupts = <41 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,mpc8548-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| mpic: pic@40000 { |
| clock-frequency = <0>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| big-endian; |
| }; |
| |
| msi@41600 { |
| compatible = "fsl,mpc8536-msi", "fsl,mpic-msi"; |
| reg = <0x41600 0x80>; |
| msi-available-ranges = <0 0x100>; |
| interrupts = < |
| 0xe0 0 |
| 0xe1 0 |
| 0xe2 0 |
| 0xe3 0 |
| 0xe4 0 |
| 0xe5 0 |
| 0xe6 0 |
| 0xe7 0>; |
| interrupt-parent = <&mpic>; |
| }; |
| }; |
| |
| pci0: pci@ffe08000 { |
| cell-index = <0>; |
| compatible = "fsl,mpc8540-pci"; |
| device_type = "pci"; |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x11 J17 Slot 1 */ |
| 0x8800 0 0 1 &mpic 1 1 |
| 0x8800 0 0 2 &mpic 2 1 |
| 0x8800 0 0 3 &mpic 3 1 |
| 0x8800 0 0 4 &mpic 4 1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <24 0x2>; |
| bus-range = <0 0xff>; |
| ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xffc00000 0 0x00010000>; |
| clock-frequency = <66666666>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xffe08000 0x1000>; |
| }; |
| |
| pci1: pcie@ffe09000 { |
| cell-index = <1>; |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xffe09000 0x1000>; |
| bus-range = <0 0xff>; |
| ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000 |
| 0x01000000 0 0x00000000 0xffc20000 0 0x00010000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <25 0x2>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 4 1 |
| 0000 0 0 2 &mpic 5 1 |
| 0000 0 0 3 &mpic 6 1 |
| 0000 0 0 4 &mpic 7 1 |
| >; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x02000000 0 0x98000000 |
| 0x02000000 0 0x98000000 |
| 0 0x08000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci2: pcie@ffe0a000 { |
| cell-index = <2>; |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xffe0a000 0x1000>; |
| bus-range = <0 0xff>; |
| ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000 |
| 0x01000000 0 0x00000000 0xffc10000 0 0x00010000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <26 0x2>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 0 1 |
| 0000 0 0 2 &mpic 1 1 |
| 0000 0 0 3 &mpic 2 1 |
| 0000 0 0 4 &mpic 3 1 |
| >; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x02000000 0 0x90000000 |
| 0x02000000 0 0x90000000 |
| 0 0x08000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci3: pcie@ffe0b000 { |
| cell-index = <3>; |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xffe0b000 0x1000>; |
| bus-range = <0 0xff>; |
| ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 |
| 0x01000000 0 0x00000000 0xffc30000 0 0x00010000>; |
| clock-frequency = <33333333>; |
| interrupt-parent = <&mpic>; |
| interrupts = <27 0x2>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0 0 1 &mpic 8 1 |
| 0000 0 0 2 &mpic 9 1 |
| 0000 0 0 3 &mpic 10 1 |
| 0000 0 0 4 &mpic 11 1 |
| >; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x02000000 0 0xa0000000 |
| 0x02000000 0 0xa0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00100000>; |
| }; |
| }; |
| }; |