Merge "msm: Perf: Add 9625 L2 PMU support"
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 5dc9a66..27ecb3a 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -69,7 +69,6 @@
 #define L2X0_CACHE_ID_REV_MASK		(0x3f)
 #define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
 #define L2X0_CACHE_ID_PART_L210		(1 << 6)
-#define L2X0_CACHE_ID_PART_L220         (2 << 6)
 #define L2X0_CACHE_ID_PART_L310		(3 << 6)
 #define L2X0_CACHE_ID_RTL_MASK          0x3f
 #define L2X0_CACHE_ID_RTL_R0P0          0x0
@@ -105,7 +104,6 @@
 #define L2X0_LATENCY_CTRL_WR_SHIFT	8
 
 #define L2X0_ADDR_FILTER_EN		1
-#define L2X0_INTR_MASK_ECNTR           1
 
 #define REV_PL310_R2P0				4
 
@@ -118,6 +116,7 @@
 #define L2X0_PREFETCH_CTRL_WRAP8_SHIFT		30
 
 #ifndef __ASSEMBLY__
+extern void __iomem *l2x0_base;
 extern void l2cc_suspend(void);
 extern void l2cc_resume(void);
 extern void l2x0_cache_sync(void);
@@ -148,49 +147,6 @@
 
 extern struct l2x0_regs l2x0_saved_regs;
 
-#ifdef CONFIG_HW_PERF_EVENTS
-/* L220/PL310 Event control register values */
-#define L2X0_EVENT_CNT_ENABLE_MASK             1
-#define L2X0_EVENT_CNT_ENABLE                  1
-#define L2X0_EVENT_CNT_RESET(x)                (1 << (x+1))
-
-/* Bit-shifted event counter config values */
-enum l2x0_perf_types {
-	L2X0_EVENT_CNT_CFG_DISABLED             = 0x0,
-	L2X0_EVENT_CNT_CFG_CO                   = 0x1,
-	L2X0_EVENT_CNT_CFG_DRHIT                = 0x2,
-	L2X0_EVENT_CNT_CFG_DRREQ                = 0x3,
-	L2X0_EVENT_CNT_CFG_DWHIT                = 0x4,
-	L2X0_EVENT_CNT_CFG_DWREQ                = 0x5,
-	L2X0_EVENT_CNT_CFG_DWTREQ               = 0x6,
-	L2X0_EVENT_CNT_CFG_IRHIT                = 0x7,
-	L2X0_EVENT_CNT_CFG_IRREQ                = 0x8,
-	L2X0_EVENT_CNT_CFG_WA                   = 0x9,
-
-	/* PL310 only */
-	L2X0_EVENT_CNT_CFG_IPFALLOC             = 0xA,
-	L2X0_EVENT_CNT_CFG_EPFHIT               = 0xB,
-	L2X0_EVENT_CNT_CFG_EPFALLOC             = 0xC,
-	L2X0_EVENT_CNT_CFG_SRRCVD               = 0xD,
-	L2X0_EVENT_CNT_CFG_SRCONF               = 0xE,
-	L2X0_EVENT_CNT_CFG_EPFRCVD              = 0xF,
-};
-
-#define L220_EVENT_CNT_CFG_MAX                 L2X0_EVENT_CNT_CFG_WA
-#define PL310_EVENT_CNT_CFG_MAX                L2X0_EVENT_CNT_CFG_EPFRCVD
-
-#define L2X0_EVENT_CNT_CFG_SHIFT               2
-#define L2X0_EVENT_CNT_CFG_MASK                (0xF << 2)
-
-#define L2X0_EVENT_CNT_CFG_INTR_MASK           0x3
-#define L2X0_EVENT_CNT_CFG_INTR_DISABLED       0x0
-#define L2X0_EVENT_CNT_CFG_INTR_INCREMENT      0x1
-#define L2X0_EVENT_CNT_CFG_INTR_OVERFLOW       0x2
-
-#define L2X0_NUM_COUNTERS                      2
-
-#endif /* CONFIG_HW_PERF_EVENTS */
-
 #endif /* __ASSEMBLY__ */
 
 #endif
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 8dd8579..a32de20 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -372,6 +372,7 @@
 	select MSM_QDSP6_APRV2
 	select MSM_QDSP6V2_CODECS
 	select MSM_AUDIO_QDSP6V2 if SND_SOC
+	select CPU_HAS_L2_PMU
 
 config ARCH_MSM8910
 	bool "MSM8910"
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index ff21190..9d9550e 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -34,6 +34,7 @@
 obj-$(CONFIG_ARCH_MSM_KRAIT) += msm-krait-l2-accessors.o pmu.o perf_event_msm_krait_l2.o
 obj-$(CONFIG_ARCH_MSM_KRAIT) += krait-scm.o
 obj-$(CONFIG_ARCH_MSM7X27A) += pmu.o
+obj-$(CONFIG_ARCH_MSM9625) += pmu.o perf_event_msm_pl310.o
 
 ifndef CONFIG_MSM_SMP
 obj-$(CONFIG_ARCH_MSM_SCORPION) += msm_fault_handlers.o
diff --git a/arch/arm/mach-msm/perf_event_msm_pl310.c b/arch/arm/mach-msm/perf_event_msm_pl310.c
new file mode 100644
index 0000000..40a2f98
--- /dev/null
+++ b/arch/arm/mach-msm/perf_event_msm_pl310.c
@@ -0,0 +1,406 @@
+/*
+ * Copyright (C) 2007 ARM Limited
+ * Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <asm/pmu.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/*
+ * Store dynamic PMU type after registration,
+ * to uniquely identify this PMU at runtime.
+ */
+static u32 pmu_type;
+
+/* This controller only supports 16 Events.*/
+PMU_FORMAT_ATTR(l2_config, "config:0-4");
+
+static struct attribute *arm_l2_ev_formats[] = {
+	&format_attr_l2_config.attr,
+	NULL,
+};
+
+/*
+ * Format group is essential to access PMU's from userspace
+ * via their .name field.
+ */
+static struct attribute_group arm_l2_pmu_format_group = {
+	.name = "format",
+	.attrs = arm_l2_ev_formats,
+};
+
+static const struct attribute_group *arm_l2_pmu_attr_grps[] = {
+	&arm_l2_pmu_format_group,
+	NULL,
+};
+
+#define L2X0_AUX_CTRL_EVENT_MONITOR_SHIFT	20
+#define L2X0_INTR_MASK_ECNTR		1
+
+/* L220/PL310 Event control register values */
+#define L2X0_EVENT_CNT_ENABLE_MASK		1
+#define L2X0_EVENT_CNT_ENABLE			1
+#define L2X0_EVENT_CNT_RESET(x)			(1 << (x+1))
+
+/* Bit-shifted event counter config values */
+enum l2x0_perf_types {
+	L2X0_EVENT_CNT_CFG_DISABLED		= 0x0,
+	L2X0_EVENT_CNT_CFG_CO			= 0x1,
+	L2X0_EVENT_CNT_CFG_DRHIT		= 0x2,
+	L2X0_EVENT_CNT_CFG_DRREQ		= 0x3,
+	L2X0_EVENT_CNT_CFG_DWHIT		= 0x4,
+	L2X0_EVENT_CNT_CFG_DWREQ		= 0x5,
+	L2X0_EVENT_CNT_CFG_DWTREQ		= 0x6,
+	L2X0_EVENT_CNT_CFG_IRHIT		= 0x7,
+	L2X0_EVENT_CNT_CFG_IRREQ		= 0x8,
+	L2X0_EVENT_CNT_CFG_WA			= 0x9,
+
+	/* PL310 only */
+	L2X0_EVENT_CNT_CFG_IPFALLOC		= 0xA,
+	L2X0_EVENT_CNT_CFG_EPFHIT		= 0xB,
+	L2X0_EVENT_CNT_CFG_EPFALLOC		= 0xC,
+	L2X0_EVENT_CNT_CFG_SRRCVD		= 0xD,
+	L2X0_EVENT_CNT_CFG_SRCONF		= 0xE,
+	L2X0_EVENT_CNT_CFG_EPFRCVD		= 0xF,
+};
+
+#define PL310_EVENT_CNT_CFG_MAX			L2X0_EVENT_CNT_CFG_EPFRCVD
+
+#define L2X0_EVENT_CNT_CFG_SHIFT		2
+#define L2X0_EVENT_CNT_CFG_MASK			(0xF << 2)
+
+#define L2X0_EVENT_CNT_CFG_INTR_MASK		0x3
+#define L2X0_EVENT_CNT_CFG_INTR_DISABLED	0x0
+#define L2X0_EVENT_CNT_CFG_INTR_INCREMENT	0x1
+#define L2X0_EVENT_CNT_CFG_INTR_OVERFLOW	0x2
+
+#define L2X0_NUM_COUNTERS			2
+static struct arm_pmu l2x0_pmu;
+
+static u32 l2x0pmu_max_event_id = 0xf;
+
+static struct perf_event *events[2];
+static unsigned long used_mask[BITS_TO_LONGS(2)];
+static struct pmu_hw_events l2x0pmu_hw_events = {
+	.events = events,
+	.used_mask = used_mask,
+	.pmu_lock = __RAW_SPIN_LOCK_UNLOCKED(l2x0pmu_hw_events.pmu_lock),
+};
+
+#define COUNTER_CFG_ADDR(idx)	(l2x0_base + L2X0_EVENT_CNT0_CFG - 4*idx)
+
+#define COUNTER_CTRL_ADDR	(l2x0_base + L2X0_EVENT_CNT_CTRL)
+
+#define COUNTER_ADDR(idx)	(l2x0_base + L2X0_EVENT_CNT0_VAL - 4*idx)
+
+static void l2x0_clear_interrupts(u32 flags)
+{
+	writel_relaxed(flags, l2x0_base + L2X0_INTR_CLEAR);
+}
+
+static struct pmu_hw_events *l2x0pmu_get_hw_events(void)
+{
+	return &l2x0pmu_hw_events;
+}
+
+static u32 l2x0pmu_read_ctrl(void)
+{
+	return readl_relaxed(COUNTER_CTRL_ADDR);
+}
+
+static void l2x0pmu_write_ctrl(u32 val)
+{
+	writel_relaxed(val, COUNTER_CTRL_ADDR);
+}
+
+static u32 l2x0pmu_read_cfg(int idx)
+{
+	return readl_relaxed(COUNTER_CFG_ADDR(idx));
+}
+
+static void l2x0pmu_write_cfg(u32 val, int idx)
+{
+	writel_relaxed(val, COUNTER_CFG_ADDR(idx));
+}
+
+static void l2x0pmu_enable_counter(u32 cfg, int idx)
+{
+	cfg |= L2X0_EVENT_CNT_CFG_INTR_OVERFLOW;
+	l2x0pmu_write_cfg(cfg, idx);
+}
+
+static u32 l2x0pmu_disable_counter(int idx)
+{
+	u32 cfg, oldcfg;
+
+	cfg = oldcfg = l2x0pmu_read_cfg(idx);
+
+	cfg &= ~L2X0_EVENT_CNT_CFG_MASK;
+	cfg &= ~L2X0_EVENT_CNT_CFG_INTR_MASK;
+	l2x0pmu_write_cfg(cfg, idx);
+
+	return oldcfg;
+}
+
+static u32 l2x0pmu_read_counter(int idx)
+{
+	u32 val = readl_relaxed(COUNTER_ADDR(idx));
+
+	return val;
+}
+
+static void l2x0pmu_write_counter(int idx, u32 val)
+{
+	/*
+	 * L2X0 counters can only be written to when they are disabled.
+	 * As perf core does not disable counters before writing to them
+	 * under interrupts, we must do so here.
+	 */
+	u32 cfg = l2x0pmu_disable_counter(idx);
+	writel_relaxed(val, COUNTER_ADDR(idx));
+	l2x0pmu_write_cfg(cfg, idx);
+}
+
+static int counter_is_saturated(int idx)
+{
+	return l2x0pmu_read_counter(idx) == 0xFFFFFFFF;
+}
+
+static void l2x0pmu_start(void)
+{
+	unsigned long flags;
+	u32 val;
+
+	raw_spin_lock_irqsave(&l2x0pmu_hw_events.pmu_lock, flags);
+
+	/*
+	 * TODO: Enable counter interrupt,
+	 * once we know it works on this chip.
+	 */
+
+	val = l2x0pmu_read_ctrl();
+
+	val |= L2X0_EVENT_CNT_ENABLE;
+	l2x0pmu_write_ctrl(val);
+
+	raw_spin_unlock_irqrestore(&l2x0pmu_hw_events.pmu_lock, flags);
+}
+
+static void l2x0pmu_stop(void)
+{
+	unsigned long flags;
+	u32 val;
+
+	raw_spin_lock_irqsave(&l2x0pmu_hw_events.pmu_lock, flags);
+
+	val = l2x0pmu_read_ctrl();
+	val &= ~L2X0_EVENT_CNT_ENABLE_MASK;
+	l2x0pmu_write_ctrl(val);
+
+	/*
+	 * TODO: Disable counter interrupt,
+	 * once we know it works on this chip.
+	 */
+
+	raw_spin_unlock_irqrestore(&l2x0pmu_hw_events.pmu_lock, flags);
+}
+
+static void l2x0pmu_enable(struct hw_perf_event *event, int idx, int cpu)
+{
+	unsigned long flags;
+	u32 cfg;
+
+	raw_spin_lock_irqsave(&l2x0pmu_hw_events.pmu_lock, flags);
+
+	cfg = (event->config_base << L2X0_EVENT_CNT_CFG_SHIFT) &
+						L2X0_EVENT_CNT_CFG_MASK;
+	l2x0pmu_enable_counter(cfg, idx);
+
+	raw_spin_unlock_irqrestore(&l2x0pmu_hw_events.pmu_lock, flags);
+}
+
+static void l2x0pmu_disable(struct hw_perf_event *event, int idx)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&l2x0pmu_hw_events.pmu_lock, flags);
+	l2x0pmu_disable_counter(idx);
+	raw_spin_unlock_irqrestore(&l2x0pmu_hw_events.pmu_lock, flags);
+}
+
+static int l2x0pmu_get_event_idx(struct pmu_hw_events *events,
+					struct hw_perf_event *hwc)
+{
+	int idx;
+
+	/* Counters are identical. Just grab a free one. */
+	for (idx = 0; idx < L2X0_NUM_COUNTERS; ++idx) {
+		if (!test_and_set_bit(idx, l2x0pmu_hw_events.used_mask))
+			return idx;
+	}
+
+	return -EAGAIN;
+}
+
+/*
+ * As System PMUs are affine to CPU0, the fact that interrupts are disabled
+ * during interrupt handling is enough to serialise our actions and make this
+ * safe. We do not need to grab our pmu_lock here.
+ */
+static irqreturn_t l2x0pmu_handle_irq(int irq, void *dev)
+{
+	irqreturn_t status = IRQ_NONE;
+	struct perf_sample_data data;
+	struct pt_regs *regs;
+	int idx;
+
+	regs = get_irq_regs();
+
+	for (idx = 0; idx < L2X0_NUM_COUNTERS; ++idx) {
+		struct perf_event *event = l2x0pmu_hw_events.events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!counter_is_saturated(idx))
+			continue;
+
+		status = IRQ_HANDLED;
+
+		hwc = &event->hw;
+
+		/*
+		 * The armpmu_* functions expect counters to overflow, but
+		 * L220/PL310 counters saturate instead. Fake the overflow
+		 * here so the hardware is in sync with what the framework
+		 * expects.
+		 */
+		l2x0pmu_write_counter(idx, 0);
+
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, &data, regs))
+			l2x0pmu_disable_counter(idx);
+	}
+
+	l2x0_clear_interrupts(L2X0_INTR_MASK_ECNTR);
+
+	irq_work_run();
+
+	return status;
+}
+
+static int map_l2x0_raw_event(u64 config)
+{
+	return (config <= l2x0pmu_max_event_id) ? config : -ENOENT;
+}
+
+static int l2x0pmu_map_event(struct perf_event *event)
+{
+	u64 config = event->attr.config;
+	u64 supported_samples = (PERF_SAMPLE_TIME	|
+				 PERF_SAMPLE_ID		|
+				 PERF_SAMPLE_PERIOD	|
+				 PERF_SAMPLE_STREAM_ID	|
+				 PERF_SAMPLE_RAW);
+
+	if ((pmu_type == 0) || (pmu_type != event->attr.type))
+		return -ENOENT;
+
+	if (event->attr.sample_type & ~supported_samples)
+		return -ENOENT;
+
+	return map_l2x0_raw_event(config);
+}
+
+static int
+arm_l2_pmu_generic_request_irq(int irq, irq_handler_t *handle_irq)
+{
+	return request_irq(irq, *handle_irq,
+			IRQF_DISABLED | IRQF_NOBALANCING,
+			"arm-l2-armpmu", NULL);
+}
+
+static void
+arm_l2_pmu_generic_free_irq(int irq)
+{
+	if (irq >= 0)
+		free_irq(irq, NULL);
+}
+
+static struct arm_pmu l2x0_pmu = {
+	.id		= ARM_PERF_PMU_ID_L2X0,
+	.type		= ARM_PMU_DEVICE_L2CC,
+	.name		= "msm-l2",
+	.start		= l2x0pmu_start,
+	.stop		= l2x0pmu_stop,
+	.handle_irq	= l2x0pmu_handle_irq,
+	.enable		= l2x0pmu_enable,
+	.disable	= l2x0pmu_disable,
+	.get_event_idx	= l2x0pmu_get_event_idx,
+	.read_counter	= l2x0pmu_read_counter,
+	.write_counter	= l2x0pmu_write_counter,
+	.map_event	= l2x0pmu_map_event,
+	.num_events	= 2,
+	.max_period	= 0xFFFFFFFF,
+	.get_hw_events	= l2x0pmu_get_hw_events,
+	.pmu.attr_groups = arm_l2_pmu_attr_grps,
+	.request_pmu_irq = arm_l2_pmu_generic_request_irq,
+	.free_pmu_irq	= arm_l2_pmu_generic_free_irq,
+};
+
+static int __devinit l2x0pmu_device_probe(struct platform_device *pdev)
+{
+	u32 aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+	u32 debug = readl_relaxed(l2x0_base + L2X0_DEBUG_CTRL);
+	l2x0_pmu.plat_device = pdev;
+
+	if (!(aux & (1 << L2X0_AUX_CTRL_EVENT_MONITOR_SHIFT))) {
+		pr_err("Ev Monitor is OFF. L2 counters disabled.\n");
+		return -EOPNOTSUPP;
+	}
+
+	pr_info("L2CC PMU device found. DEBUG_CTRL: %x\n", debug);
+
+	/* Get value of dynamically allocated PMU type. */
+	if (!armpmu_register(&l2x0_pmu, "msm-l2", -1))
+		pmu_type = l2x0_pmu.pmu.type;
+	else {
+		pr_err("l2x0_pmu registration failed\n");
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static struct platform_driver l2x0pmu_driver = {
+	.driver		= {
+		.name	= "l2-arm-pmu",
+	},
+	.probe		= l2x0pmu_device_probe,
+};
+
+static int __init register_pmu_driver(void)
+{
+	return platform_driver_register(&l2x0pmu_driver);
+}
+device_initcall(register_pmu_driver);
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index adab76d..1f2b868 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -23,16 +23,13 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/platform_device.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/irq_regs.h>
-#include <asm/pmu.h>
 
 #define CACHE_LINE_SIZE		32
 
-static void __iomem *l2x0_base;
+void __iomem *l2x0_base;
 static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
@@ -656,315 +653,3 @@
 	pl310_resume();
 	dmb();
 }
-
-#ifdef CONFIG_HW_PERF_EVENTS
-/*
- * L220/PL310 PMU-specific functionality.
- * TODO: Put this in a separate file and get the l2x0 driver to register
- * the PMU from l2x0_{of}_init.
- */
-
-static struct arm_pmu l2x0_pmu;
-
-static u64 l2x0pmu_max_event_id;
-
-static struct perf_event *events[2];
-static unsigned long used_mask[BITS_TO_LONGS(2)];
-static struct pmu_hw_events hw_events = {
-	.events = events,
-	.used_mask = used_mask,
-	.pmu_lock = __RAW_SPIN_LOCK_UNLOCKED(l2x0pmu_hw_events.pmu_lock),
-};
-
-#define COUNTER_CFG_ADDR(idx)	(l2x0_base + L2X0_EVENT_CNT0_CFG - 4*idx)
-
-#define COUNTER_CTRL_ADDR	(l2x0_base + L2X0_EVENT_CNT_CTRL)
-
-#define COUNTER_ADDR(idx)	(l2x0_base + L2X0_EVENT_CNT0_VAL - 4*idx)
-
-static u32 l2x0_read_intr_mask(void)
-{
-	return readl_relaxed(l2x0_base + L2X0_INTR_MASK);
-}
-
-static void l2x0_write_intr_mask(u32 val)
-{
-	writel_relaxed(val, l2x0_base + L2X0_INTR_MASK);
-}
-
-static void l2x0_enable_counter_interrupt(void)
-{
-	u32 intr_mask = l2x0_read_intr_mask();
-	intr_mask |= L2X0_INTR_MASK_ECNTR;
-	l2x0_write_intr_mask(intr_mask);
-}
-
-static void l2x0_disable_counter_interrupt(void)
-{
-	u32 intr_mask = l2x0_read_intr_mask();
-	intr_mask &= ~L2X0_INTR_MASK_ECNTR;
-	l2x0_write_intr_mask(intr_mask);
-}
-
-static void l2x0_clear_interrupts(u32 flags)
-{
-	writel_relaxed(flags, l2x0_base + L2X0_INTR_CLEAR);
-}
-
-static struct pmu_hw_events *l2x0pmu_get_hw_events(void)
-{
-	return &hw_events;
-}
-
-static u32 l2x0pmu_read_ctrl(void)
-{
-	return readl_relaxed(COUNTER_CTRL_ADDR);
-}
-
-static void l2x0pmu_write_ctrl(u32 val)
-{
-	writel_relaxed(val, COUNTER_CTRL_ADDR);
-}
-
-static u32 l2x0pmu_read_cfg(int idx)
-{
-	return readl_relaxed(COUNTER_CFG_ADDR(idx));
-}
-
-static void l2x0pmu_write_cfg(u32 val, int idx)
-{
-	writel_relaxed(val, COUNTER_CFG_ADDR(idx));
-}
-
-static void l2x0pmu_enable_counter(u32 cfg, int idx)
-{
-	cfg |= L2X0_EVENT_CNT_CFG_INTR_OVERFLOW;
-	l2x0pmu_write_cfg(cfg, idx);
-}
-
-static u32 l2x0pmu_disable_counter(int idx)
-{
-	u32 cfg, oldcfg;
-
-	cfg = oldcfg = l2x0pmu_read_cfg(idx);
-	cfg &= ~L2X0_EVENT_CNT_CFG_MASK;
-	cfg &= ~L2X0_EVENT_CNT_CFG_INTR_MASK;
-	l2x0pmu_write_cfg(cfg, idx);
-
-	return oldcfg;
-}
-
-static u32 l2x0pmu_read_counter(int idx)
-{
-	return readl_relaxed(COUNTER_ADDR(idx));
-}
-
-static void l2x0pmu_write_counter(int idx, u32 val)
-{
-	/*
-	 * L2X0 counters can only be written to when they are disabled.
-	 * As perf core does not disable counters before writing to them
-	 * under interrupts, we must do so here.
-	 */
-	u32 cfg = l2x0pmu_disable_counter(idx);
-	writel_relaxed(val, COUNTER_ADDR(idx));
-	l2x0pmu_write_cfg(cfg, idx);
-}
-
-static int counter_is_saturated(int idx)
-{
-	return l2x0pmu_read_counter(idx) == 0xFFFFFFFF;
-}
-
-static void l2x0pmu_start(void)
-{
-	unsigned long flags;
-	u32 val;
-
-	raw_spin_lock_irqsave(&hw_events.pmu_lock, flags);
-
-	l2x0_enable_counter_interrupt();
-
-	val = l2x0pmu_read_ctrl();
-	val |= L2X0_EVENT_CNT_ENABLE;
-	l2x0pmu_write_ctrl(val);
-
-	raw_spin_unlock_irqrestore(&hw_events.pmu_lock, flags);
-}
-
-static void l2x0pmu_stop(void)
-{
-	unsigned long flags;
-	u32 val;
-
-	raw_spin_lock_irqsave(&hw_events.pmu_lock, flags);
-
-	val = l2x0pmu_read_ctrl();
-	val &= ~L2X0_EVENT_CNT_ENABLE_MASK;
-	l2x0pmu_write_ctrl(val);
-
-	l2x0_disable_counter_interrupt();
-
-	raw_spin_unlock_irqrestore(&hw_events.pmu_lock, flags);
-}
-
-static void l2x0pmu_enable(struct hw_perf_event *event, int idx, int cpu)
-{
-	unsigned long flags;
-	u32 cfg;
-
-	raw_spin_lock_irqsave(&hw_events.pmu_lock, flags);
-
-	cfg = (event->config_base << L2X0_EVENT_CNT_CFG_SHIFT) &
-						L2X0_EVENT_CNT_CFG_MASK;
-	l2x0pmu_enable_counter(cfg, idx);
-
-	raw_spin_unlock_irqrestore(&hw_events.pmu_lock, flags);
-}
-
-static void l2x0pmu_disable(struct hw_perf_event *event, int idx)
-{
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&hw_events.pmu_lock, flags);
-	l2x0pmu_disable_counter(idx);
-	raw_spin_unlock_irqrestore(&hw_events.pmu_lock, flags);
-}
-
-static int l2x0pmu_get_event_idx(struct pmu_hw_events *events,
-					struct hw_perf_event *hwc)
-{
-	int idx;
-
-	/* Counters are identical. Just grab a free one. */
-	for (idx = 0; idx < L2X0_NUM_COUNTERS; ++idx) {
-		if (!test_and_set_bit(idx, hw_events.used_mask))
-			return idx;
-	}
-
-	return -EAGAIN;
-}
-
-/*
- * As System PMUs are affine to CPU0, the fact that interrupts are disabled
- * during interrupt handling is enough to serialise our actions and make this
- * safe. We do not need to grab our pmu_lock here.
- */
-static irqreturn_t l2x0pmu_handle_irq(int irq, void *dev)
-{
-	irqreturn_t status = IRQ_NONE;
-	struct perf_sample_data data;
-	struct pt_regs *regs;
-	int idx;
-
-	regs = get_irq_regs();
-
-	for (idx = 0; idx < L2X0_NUM_COUNTERS; ++idx) {
-		struct perf_event *event = hw_events.events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!counter_is_saturated(idx))
-			continue;
-
-		status = IRQ_HANDLED;
-
-		hwc = &event->hw;
-
-		/*
-		 * The armpmu_* functions expect counters to overflow, but
-		 * L220/PL310 counters saturate instead. Fake the overflow
-		 * here so the hardware is in sync with what the framework
-		 * expects.
-		 */
-		l2x0pmu_write_counter(idx, 0);
-
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			l2x0pmu_disable_counter(idx);
-	}
-
-	l2x0_clear_interrupts(L2X0_INTR_MASK_ECNTR);
-
-	irq_work_run();
-
-	return status;
-}
-
-static int map_l2x0_raw_event(u64 config)
-{
-	return (config <= l2x0pmu_max_event_id) ? config : -ENOENT;
-}
-
-static int l2x0pmu_map_event(struct perf_event *event)
-{
-	u64 config = event->attr.config;
-	u64 supported_samples = (PERF_SAMPLE_TIME	|
-				 PERF_SAMPLE_ID		|
-				 PERF_SAMPLE_PERIOD	|
-				 PERF_SAMPLE_STREAM_ID	|
-				 PERF_SAMPLE_RAW);
-
-	if (event->attr.type != l2x0_pmu.pmu.type)
-		return -ENOENT;
-
-	/*
-	 * L2x0 counters are global across CPUs.
-	 * If userspace ask perf to monitor from multiple CPUs, each CPU will
-	 * report the shared total. When summed, this will be the actual value
-	 * multiplied by the number of CPUs. We limit monitoring to a single
-	 * CPU (0) to prevent confusion stemming from this.
-	 */
-	if (event->cpu != 0)
-		return -ENOENT;
-
-	if (event->attr.sample_type & ~supported_samples)
-		return -ENOENT;
-
-	return map_l2x0_raw_event(config);
-}
-
-static struct arm_pmu l2x0_pmu = {
-	.id		= ARM_PERF_PMU_ID_L2X0,
-	.type		= ARM_PMU_DEVICE_L2CC,
-	.name		= "ARM L220/PL310 L2 Cache controller",
-	.start		= l2x0pmu_start,
-	.stop		= l2x0pmu_stop,
-	.handle_irq	= l2x0pmu_handle_irq,
-	.enable		= l2x0pmu_enable,
-	.disable	= l2x0pmu_disable,
-	.get_event_idx	= l2x0pmu_get_event_idx,
-	.read_counter	= l2x0pmu_read_counter,
-	.write_counter	= l2x0pmu_write_counter,
-	.map_event	= l2x0pmu_map_event,
-	.num_events	= 2,
-	.max_period	= 0xFFFFFFFF,
-	.get_hw_events	= l2x0pmu_get_hw_events,
-};
-
-static int __devinit l2x0pmu_device_probe(struct platform_device *pdev)
-{
-	l2x0_pmu.plat_device = pdev;
-	/* FIXME: return code? */
-	armpmu_register(&l2x0_pmu, "l2x0", -1);
-	return 0;
-}
-
-static struct platform_driver l2x0pmu_driver = {
-	.driver		= {
-		.name	= "l2x0-pmu",
-	},
-	.probe		= l2x0pmu_device_probe,
-};
-
-static int __init register_pmu_driver(void)
-{
-	return platform_driver_register(&l2x0pmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-#endif /* CONFIG_HW_PERF_EVENTS */