| /* |
| * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regulator/cpr-regulator.h> |
| |
| #include <mach/clk-provider.h> |
| #include <mach/msm_bus.h> |
| #include <mach/msm_bus_board.h> |
| #include <mach/rpm-regulator-smd.h> |
| |
| #include "acpuclock-cortex.h" |
| |
| #define RCG_CONFIG_UPDATE_BIT BIT(0) |
| |
| static struct msm_bus_paths bw_level_tbl[] = { |
| [0] = BW_MBPS(152), /* At least 19 MHz on bus. */ |
| [1] = BW_MBPS(300), /* At least 37.5 MHz on bus. */ |
| [2] = BW_MBPS(400), /* At least 50 MHz on bus. */ |
| [3] = BW_MBPS(800), /* At least 100 MHz on bus. */ |
| [4] = BW_MBPS(1600), /* At least 200 MHz on bus. */ |
| [5] = BW_MBPS(2128), /* At least 266 MHz on bus. */ |
| [6] = BW_MBPS(3200), /* At least 400 MHz on bus. */ |
| [7] = BW_MBPS(4264), /* At least 533 MHz on bus. */ |
| }; |
| |
| static struct msm_bus_scale_pdata bus_client_pdata = { |
| .usecase = bw_level_tbl, |
| .num_usecases = ARRAY_SIZE(bw_level_tbl), |
| .active_only = 1, |
| .name = "acpuclock", |
| }; |
| |
| /* TODO: |
| * 1) Update MX voltage when data is avaiable |
| * 2) Update bus bandwidth |
| * 3) Depending on Frodo version, may need minimum of LVL_NOM |
| */ |
| static struct clkctl_acpu_speed acpu_freq_tbl[] = { |
| { 0, 19200, CXO, 0, 0, CPR_CORNER_SVS, 1150000, 0 }, |
| { 1, 300000, PLL0, 4, 2, CPR_CORNER_SVS, 1150000, 4 }, |
| { 1, 384000, ACPUPLL, 5, 0, CPR_CORNER_SVS, 1150000, 4 }, |
| { 1, 600000, PLL0, 4, 0, CPR_CORNER_NORMAL, 1150000, 6 }, |
| { 1, 787200, ACPUPLL, 5, 0, CPR_CORNER_NORMAL, 1150000, 7 }, |
| { 0, 998400, ACPUPLL, 5, 0, CPR_CORNER_TURBO, 1150000, 7 }, |
| { 0, 1190400, ACPUPLL, 5, 0, CPR_CORNER_TURBO, 1150000, 7 }, |
| { 0 } |
| }; |
| |
| static struct acpuclk_drv_data drv_data = { |
| .freq_tbl = acpu_freq_tbl, |
| .current_speed = &(struct clkctl_acpu_speed){ 0 }, |
| .bus_scale = &bus_client_pdata, |
| .vdd_max_cpu = CPR_CORNER_TURBO, |
| .vdd_max_mem = 1150000, |
| .src_clocks = { |
| [PLL0].name = "gpll0", |
| [ACPUPLL].name = "a7sspll", |
| }, |
| .reg_data = { |
| .cfg_src_mask = BM(10, 8), |
| .cfg_src_shift = 8, |
| .cfg_div_mask = BM(4, 0), |
| .cfg_div_shift = 0, |
| .update_mask = RCG_CONFIG_UPDATE_BIT, |
| .poll_mask = RCG_CONFIG_UPDATE_BIT, |
| }, |
| .power_collapse_khz = 300000, |
| .wait_for_irq_khz = 300000, |
| }; |
| |
| static int __init acpuclk_a7_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| u32 i; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rcg_base"); |
| if (!res) |
| return -EINVAL; |
| |
| drv_data.apcs_rcg_cmd = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!drv_data.apcs_rcg_cmd) |
| return -ENOMEM; |
| |
| drv_data.apcs_rcg_config = drv_data.apcs_rcg_cmd + 4; |
| |
| drv_data.vdd_cpu = devm_regulator_get(&pdev->dev, "a7_cpu"); |
| if (IS_ERR(drv_data.vdd_cpu)) { |
| dev_err(&pdev->dev, "regulator for %s get failed\n", "a7_cpu"); |
| return PTR_ERR(drv_data.vdd_cpu); |
| } |
| |
| drv_data.vdd_mem = devm_regulator_get(&pdev->dev, "a7_mem"); |
| if (IS_ERR(drv_data.vdd_mem)) { |
| dev_err(&pdev->dev, "regulator for %s get failed\n", "a7_mem"); |
| return PTR_ERR(drv_data.vdd_mem); |
| } |
| |
| for (i = 0; i < NUM_SRC; i++) { |
| if (!drv_data.src_clocks[i].name) |
| continue; |
| drv_data.src_clocks[i].clk = |
| devm_clk_get(&pdev->dev, drv_data.src_clocks[i].name); |
| if (IS_ERR(drv_data.src_clocks[i].clk)) { |
| dev_err(&pdev->dev, "Unable to get clock %s\n", |
| drv_data.src_clocks[i].name); |
| return -EPROBE_DEFER; |
| } |
| } |
| |
| /* Enable the always on source */ |
| clk_prepare_enable(drv_data.src_clocks[PLL0].clk); |
| |
| return acpuclk_cortex_init(pdev, &drv_data); |
| } |
| |
| static struct of_device_id acpuclk_a7_match_table[] = { |
| {.compatible = "qcom,acpuclk-a7"}, |
| {} |
| }; |
| |
| static struct platform_driver acpuclk_a7_driver = { |
| .driver = { |
| .name = "acpuclk-a7", |
| .of_match_table = acpuclk_a7_match_table, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init acpuclk_a7_init(void) |
| { |
| return platform_driver_probe(&acpuclk_a7_driver, acpuclk_a7_probe); |
| } |
| device_initcall(acpuclk_a7_init); |