Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/qib: Fix panic in RC error flushing logic
IB/iser: DMA unmap TX bufs used for iSCSI/iSER headers
IB/iser: Use separate buffers for the login request/response
IB/mthca: Fix buddy->num_free allocation size
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle
index c940239..2b90d32 100644
--- a/Documentation/CodingStyle
+++ b/Documentation/CodingStyle
@@ -166,8 +166,8 @@
else
do_that();
-This does not apply if one branch of a conditional statement is a single
-statement. Use braces in both branches.
+This does not apply if only one branch of a conditional statement is a single
+statement; in the latter case use braces in both branches:
if (condition) {
do_this();
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index fe23269..66bd97a 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -50,6 +50,13 @@
implementation may choose to ignore flags that affect the location of
the returned memory, like GFP_DMA).
+void *
+dma_zalloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+
+Wraps dma_alloc_coherent() and also zeroes the returned memory if the
+allocation attempt succeeded.
+
void
dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_handle)
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 91410b6..b68698f 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2486,6 +2486,9 @@
<listitem>
<para>Flash API. <xref linkend="flash-controls" /></para>
</listitem>
+ <listitem>
+ <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
+ </listitem>
</itemizedlist>
</section>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 23fdf79..3bc5ee8 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -232,8 +232,9 @@
<entry>Enables a power line frequency filter to avoid
flicker. Possible values for <constant>enum v4l2_power_line_frequency</constant> are:
<constant>V4L2_CID_POWER_LINE_FREQUENCY_DISABLED</constant> (0),
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1) and
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2).</entry>
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1),
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2) and
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_AUTO</constant> (3).</entry>
</row>
<row>
<entry><constant>V4L2_CID_HUE_AUTO</constant></entry>
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml
index c57d1ec..3f47df1 100644
--- a/Documentation/DocBook/media/v4l/io.xml
+++ b/Documentation/DocBook/media/v4l/io.xml
@@ -927,6 +927,33 @@
Applications set or clear this flag before calling the
<constant>VIDIOC_QBUF</constant> ioctl.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_PREPARED</constant></entry>
+ <entry>0x0400</entry>
+ <entry>The buffer has been prepared for I/O and can be queued by the
+application. Drivers set or clear this flag when the
+<link linkend="vidioc-querybuf">VIDIOC_QUERYBUF</link>, <link
+ linkend="vidioc-qbuf">VIDIOC_PREPARE_BUF</link>, <link
+ linkend="vidioc-qbuf">VIDIOC_QBUF</link> or <link
+ linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl is called.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry>
+ <entry>0x0400</entry>
+ <entry>Caches do not have to be invalidated for this buffer.
+Typically applications shall use this flag if the data captured in the buffer
+is not going to be touched by the CPU, instead the buffer will, probably, be
+passed on to a DMA-capable hardware unit for further processing or output.
+</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry>
+ <entry>0x0800</entry>
+ <entry>Caches do not have to be cleaned for this buffer.
+Typically applications shall use this flag for output buffers if the data
+in this buffer has not been created by the CPU but by some DMA-capable unit,
+in which case caches have not been used.</entry>
+ </row>
</tbody>
</tgroup>
</table>
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml
index 40132c2..2ab365c 100644
--- a/Documentation/DocBook/media/v4l/v4l2.xml
+++ b/Documentation/DocBook/media/v4l/v4l2.xml
@@ -469,6 +469,7 @@
&sub-close;
&sub-ioctl;
<!-- All ioctls go here. -->
+ &sub-create-bufs;
&sub-cropcap;
&sub-dbg-g-chip-ident;
&sub-dbg-g-register;
@@ -511,6 +512,7 @@
&sub-queryctrl;
&sub-query-dv-preset;
&sub-querystd;
+ &sub-prepare-buf;
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;
diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
new file mode 100644
index 0000000..73ae8a6
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
@@ -0,0 +1,139 @@
+<refentry id="vidioc-create-bufs">
+ <refmeta>
+ <refentrytitle>ioctl VIDIOC_CREATE_BUFS</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>VIDIOC_CREATE_BUFS</refname>
+ <refpurpose>Create buffers for Memory Mapped or User Pointer I/O</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct v4l2_create_buffers *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>VIDIOC_CREATE_BUFS</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>This ioctl is used to create buffers for <link linkend="mmap">memory
+mapped</link> or <link linkend="userp">user pointer</link>
+I/O. It can be used as an alternative or in addition to the
+<constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter control over buffers
+is required. This ioctl can be called multiple times to create buffers of
+different sizes.</para>
+
+ <para>To allocate device buffers applications initialize relevant fields of
+the <structname>v4l2_create_buffers</structname> structure. They set the
+<structfield>type</structfield> field in the
+<structname>v4l2_format</structname> structure, embedded in this
+structure, to the respective stream or buffer type.
+<structfield>count</structfield> must be set to the number of required buffers.
+<structfield>memory</structfield> specifies the required I/O method. The
+<structfield>format</structfield> field shall typically be filled in using
+either the <constant>VIDIOC_TRY_FMT</constant> or
+<constant>VIDIOC_G_FMT</constant> ioctl(). Additionally, applications can adjust
+<structfield>sizeimage</structfield> fields to fit their specific needs. The
+<structfield>reserved</structfield> array must be zeroed.</para>
+
+ <para>When the ioctl is called with a pointer to this structure the driver
+will attempt to allocate up to the requested number of buffers and store the
+actual number allocated and the starting index in the
+<structfield>count</structfield> and the <structfield>index</structfield> fields
+respectively. On return <structfield>count</structfield> can be smaller than
+the number requested. The driver may also increase buffer sizes if required,
+however, it will not update <structfield>sizeimage</structfield> field values.
+The user has to use <constant>VIDIOC_QUERYBUF</constant> to retrieve that
+information.</para>
+
+ <table pgwide="1" frame="none" id="v4l2-create-buffers">
+ <title>struct <structname>v4l2_create_buffers</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>index</structfield></entry>
+ <entry>The starting buffer index, returned by the driver.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>count</structfield></entry>
+ <entry>The number of buffers requested or granted.</entry>
+ </row>
+ <row>
+ <entry>&v4l2-memory;</entry>
+ <entry><structfield>memory</structfield></entry>
+ <entry>Applications set this field to
+<constant>V4L2_MEMORY_MMAP</constant> or
+<constant>V4L2_MEMORY_USERPTR</constant>.</entry>
+ </row>
+ <row>
+ <entry>&v4l2-format;</entry>
+ <entry><structfield>format</structfield></entry>
+ <entry>Filled in by the application, preserved by the driver.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>reserved</structfield>[8]</entry>
+ <entry>A place holder for future extensions.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>ENOMEM</errorcode></term>
+ <listitem>
+ <para>No memory to allocate buffers for <link linkend="mmap">memory
+mapped</link> I/O.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EINVAL</errorcode></term>
+ <listitem>
+ <para>The buffer type (<structfield>type</structfield> field) or the
+requested I/O method (<structfield>memory</structfield>) is not
+supported.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
diff --git a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml
new file mode 100644
index 0000000..7bde698
--- /dev/null
+++ b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml
@@ -0,0 +1,88 @@
+<refentry id="vidioc-prepare-buf">
+ <refmeta>
+ <refentrytitle>ioctl VIDIOC_PREPARE_BUF</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>VIDIOC_PREPARE_BUF</refname>
+ <refpurpose>Prepare a buffer for I/O</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct v4l2_buffer *<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>VIDIOC_PREPARE_BUF</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>Applications can optionally call the
+<constant>VIDIOC_PREPARE_BUF</constant> ioctl to pass ownership of the buffer
+to the driver before actually enqueuing it, using the
+<constant>VIDIOC_QBUF</constant> ioctl, and to prepare it for future I/O.
+Such preparations may include cache invalidation or cleaning. Performing them
+in advance saves time during the actual I/O. In case such cache operations are
+not required, the application can use one of
+<constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant> and
+<constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant> flags to skip the respective
+step.</para>
+
+ <para>The <structname>v4l2_buffer</structname> structure is
+specified in <xref linkend="buffer" />.</para>
+ </refsect1>
+
+ <refsect1>
+ &return-value;
+
+ <variablelist>
+ <varlistentry>
+ <term><errorcode>EBUSY</errorcode></term>
+ <listitem>
+ <para>File I/O is in progress.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><errorcode>EINVAL</errorcode></term>
+ <listitem>
+ <para>The buffer <structfield>type</structfield> is not
+supported, or the <structfield>index</structfield> is out of bounds,
+or no buffers have been allocated yet, or the
+<structfield>userptr</structfield> or
+<structfield>length</structfield> are invalid.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+</refentry>
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
index 71cfbdc..3b2612e 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.txt
@@ -1,6 +1,6 @@
To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
-'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are
-assigned globally at boot time only presently.
+'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
+globally at boot time only presently.
Each io queue has a set of io scheduler tunables associated with it. These
tunables control how the io scheduler works. You can find these entries
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index cd67e90..9c452ef 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -454,8 +454,8 @@
move it into a new cgroup (possibly the root cgroup) by writing to the
new cgroup's tasks file.
-Note: If the ns cgroup is active, moving a process to another cgroup can
-fail.
+Note: Due to some restrictions enforced by some cgroup subsystems, moving
+a process to another cgroup can fail.
2.3 Mounting hierarchies by name
--------------------------------
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 06eb6d9..cc0ebc5 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -418,7 +418,6 @@
# The following additional stats are dependent on CONFIG_DEBUG_VM.
-inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
diff --git a/Documentation/device-mapper/dm-log.txt b/Documentation/device-mapper/dm-log.txt
index 994dd75..c155ac5 100644
--- a/Documentation/device-mapper/dm-log.txt
+++ b/Documentation/device-mapper/dm-log.txt
@@ -48,7 +48,7 @@
communication.
There are currently two userspace log implementations that leverage this
-framework - "clustered_disk" and "clustered_core". These implementations
+framework - "clustered-disk" and "clustered-core". These implementations
provide a cluster-coherent log for shared-storage. Device-mapper mirroring
can be used in a shared-storage environment when the cluster log implementations
are employed.
diff --git a/Documentation/device-mapper/persistent-data.txt b/Documentation/device-mapper/persistent-data.txt
new file mode 100644
index 0000000..0e5df9b
--- /dev/null
+++ b/Documentation/device-mapper/persistent-data.txt
@@ -0,0 +1,84 @@
+Introduction
+============
+
+The more-sophisticated device-mapper targets require complex metadata
+that is managed in kernel. In late 2010 we were seeing that various
+different targets were rolling their own data strutures, for example:
+
+- Mikulas Patocka's multisnap implementation
+- Heinz Mauelshagen's thin provisioning target
+- Another btree-based caching target posted to dm-devel
+- Another multi-snapshot target based on a design of Daniel Phillips
+
+Maintaining these data structures takes a lot of work, so if possible
+we'd like to reduce the number.
+
+The persistent-data library is an attempt to provide a re-usable
+framework for people who want to store metadata in device-mapper
+targets. It's currently used by the thin-provisioning target and an
+upcoming hierarchical storage target.
+
+Overview
+========
+
+The main documentation is in the header files which can all be found
+under drivers/md/persistent-data.
+
+The block manager
+-----------------
+
+dm-block-manager.[hc]
+
+This provides access to the data on disk in fixed sized-blocks. There
+is a read/write locking interface to prevent concurrent accesses, and
+keep data that is being used in the cache.
+
+Clients of persistent-data are unlikely to use this directly.
+
+The transaction manager
+-----------------------
+
+dm-transaction-manager.[hc]
+
+This restricts access to blocks and enforces copy-on-write semantics.
+The only way you can get hold of a writable block through the
+transaction manager is by shadowing an existing block (ie. doing
+copy-on-write) or allocating a fresh one. Shadowing is elided within
+the same transaction so performance is reasonable. The commit method
+ensures that all data is flushed before it writes the superblock.
+On power failure your metadata will be as it was when last committed.
+
+The Space Maps
+--------------
+
+dm-space-map.h
+dm-space-map-metadata.[hc]
+dm-space-map-disk.[hc]
+
+On-disk data structures that keep track of reference counts of blocks.
+Also acts as the allocator of new blocks. Currently two
+implementations: a simpler one for managing blocks on a different
+device (eg. thinly-provisioned data blocks); and one for managing
+the metadata space. The latter is complicated by the need to store
+its own data within the space it's managing.
+
+The data structures
+-------------------
+
+dm-btree.[hc]
+dm-btree-remove.c
+dm-btree-spine.c
+dm-btree-internal.h
+
+Currently there is only one data structure, a hierarchical btree.
+There are plans to add more. For example, something with an
+array-like interface would see a lot of use.
+
+The btree is 'hierarchical' in that you can define it to be composed
+of nested btrees, and take multiple keys. For example, the
+thin-provisioning target uses a btree with two levels of nesting.
+The first maps a device id to a mapping tree, and that in turn maps a
+virtual block to a physical block.
+
+Values stored in the btrees can have arbitrary size. Keys are always
+64bits, although nesting allows you to use multiple keys.
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
new file mode 100644
index 0000000..801d9d1
--- /dev/null
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -0,0 +1,285 @@
+Introduction
+============
+
+This document descibes a collection of device-mapper targets that
+between them implement thin-provisioning and snapshots.
+
+The main highlight of this implementation, compared to the previous
+implementation of snapshots, is that it allows many virtual devices to
+be stored on the same data volume. This simplifies administration and
+allows the sharing of data between volumes, thus reducing disk usage.
+
+Another significant feature is support for an arbitrary depth of
+recursive snapshots (snapshots of snapshots of snapshots ...). The
+previous implementation of snapshots did this by chaining together
+lookup tables, and so performance was O(depth). This new
+implementation uses a single data structure to avoid this degradation
+with depth. Fragmentation may still be an issue, however, in some
+scenarios.
+
+Metadata is stored on a separate device from data, giving the
+administrator some freedom, for example to:
+
+- Improve metadata resilience by storing metadata on a mirrored volume
+ but data on a non-mirrored one.
+
+- Improve performance by storing the metadata on SSD.
+
+Status
+======
+
+These targets are very much still in the EXPERIMENTAL state. Please
+do not yet rely on them in production. But do experiment and offer us
+feedback. Different use cases will have different performance
+characteristics, for example due to fragmentation of the data volume.
+
+If you find this software is not performing as expected please mail
+dm-devel@redhat.com with details and we'll try our best to improve
+things for you.
+
+Userspace tools for checking and repairing the metadata are under
+development.
+
+Cookbook
+========
+
+This section describes some quick recipes for using thin provisioning.
+They use the dmsetup program to control the device-mapper driver
+directly. End users will be advised to use a higher-level volume
+manager such as LVM2 once support has been added.
+
+Pool device
+-----------
+
+The pool device ties together the metadata volume and the data volume.
+It maps I/O linearly to the data volume and updates the metadata via
+two mechanisms:
+
+- Function calls from the thin targets
+
+- Device-mapper 'messages' from userspace which control the creation of new
+ virtual devices amongst other things.
+
+Setting up a fresh pool device
+------------------------------
+
+Setting up a pool device requires a valid metadata device, and a
+data device. If you do not have an existing metadata device you can
+make one by zeroing the first 4k to indicate empty metadata.
+
+ dd if=/dev/zero of=$metadata_dev bs=4096 count=1
+
+The amount of metadata you need will vary according to how many blocks
+are shared between thin devices (i.e. through snapshots). If you have
+less sharing than average you'll need a larger-than-average metadata device.
+
+As a guide, we suggest you calculate the number of bytes to use in the
+metadata device as 48 * $data_dev_size / $data_block_size but round it up
+to 2MB if the answer is smaller. The largest size supported is 16GB.
+
+If you're creating large numbers of snapshots which are recording large
+amounts of change, you may need find you need to increase this.
+
+Reloading a pool table
+----------------------
+
+You may reload a pool's table, indeed this is how the pool is resized
+if it runs out of space. (N.B. While specifying a different metadata
+device when reloading is not forbidden at the moment, things will go
+wrong if it does not route I/O to exactly the same on-disk location as
+previously.)
+
+Using an existing pool device
+-----------------------------
+
+ dmsetup create pool \
+ --table "0 20971520 thin-pool $metadata_dev $data_dev \
+ $data_block_size $low_water_mark"
+
+$data_block_size gives the smallest unit of disk space that can be
+allocated at a time expressed in units of 512-byte sectors. People
+primarily interested in thin provisioning may want to use a value such
+as 1024 (512KB). People doing lots of snapshotting may want a smaller value
+such as 128 (64KB). If you are not zeroing newly-allocated data,
+a larger $data_block_size in the region of 256000 (128MB) is suggested.
+$data_block_size must be the same for the lifetime of the
+metadata device.
+
+$low_water_mark is expressed in blocks of size $data_block_size. If
+free space on the data device drops below this level then a dm event
+will be triggered which a userspace daemon should catch allowing it to
+extend the pool device. Only one such event will be sent.
+Resuming a device with a new table itself triggers an event so the
+userspace daemon can use this to detect a situation where a new table
+already exceeds the threshold.
+
+Thin provisioning
+-----------------
+
+i) Creating a new thinly-provisioned volume.
+
+ To create a new thinly- provisioned volume you must send a message to an
+ active pool device, /dev/mapper/pool in this example.
+
+ dmsetup message /dev/mapper/pool 0 "create_thin 0"
+
+ Here '0' is an identifier for the volume, a 24-bit number. It's up
+ to the caller to allocate and manage these identifiers. If the
+ identifier is already in use, the message will fail with -EEXIST.
+
+ii) Using a thinly-provisioned volume.
+
+ Thinly-provisioned volumes are activated using the 'thin' target:
+
+ dmsetup create thin --table "0 2097152 thin /dev/mapper/pool 0"
+
+ The last parameter is the identifier for the thinp device.
+
+Internal snapshots
+------------------
+
+i) Creating an internal snapshot.
+
+ Snapshots are created with another message to the pool.
+
+ N.B. If the origin device that you wish to snapshot is active, you
+ must suspend it before creating the snapshot to avoid corruption.
+ This is NOT enforced at the moment, so please be careful!
+
+ dmsetup suspend /dev/mapper/thin
+ dmsetup message /dev/mapper/pool 0 "create_snap 1 0"
+ dmsetup resume /dev/mapper/thin
+
+ Here '1' is the identifier for the volume, a 24-bit number. '0' is the
+ identifier for the origin device.
+
+ii) Using an internal snapshot.
+
+ Once created, the user doesn't have to worry about any connection
+ between the origin and the snapshot. Indeed the snapshot is no
+ different from any other thinly-provisioned device and can be
+ snapshotted itself via the same method. It's perfectly legal to
+ have only one of them active, and there's no ordering requirement on
+ activating or removing them both. (This differs from conventional
+ device-mapper snapshots.)
+
+ Activate it exactly the same way as any other thinly-provisioned volume:
+
+ dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 1"
+
+Deactivation
+------------
+
+All devices using a pool must be deactivated before the pool itself
+can be.
+
+ dmsetup remove thin
+ dmsetup remove snap
+ dmsetup remove pool
+
+Reference
+=========
+
+'thin-pool' target
+------------------
+
+i) Constructor
+
+ thin-pool <metadata dev> <data dev> <data block size (sectors)> \
+ <low water mark (blocks)> [<number of feature args> [<arg>]*]
+
+ Optional feature arguments:
+ - 'skip_block_zeroing': skips the zeroing of newly-provisioned blocks.
+
+ Data block size must be between 64KB (128 sectors) and 1GB
+ (2097152 sectors) inclusive.
+
+
+ii) Status
+
+ <transaction id> <used metadata blocks>/<total metadata blocks>
+ <used data blocks>/<total data blocks> <held metadata root>
+
+
+ transaction id:
+ A 64-bit number used by userspace to help synchronise with metadata
+ from volume managers.
+
+ used data blocks / total data blocks
+ If the number of free blocks drops below the pool's low water mark a
+ dm event will be sent to userspace. This event is edge-triggered and
+ it will occur only once after each resume so volume manager writers
+ should register for the event and then check the target's status.
+
+ held metadata root:
+ The location, in sectors, of the metadata root that has been
+ 'held' for userspace read access. '-' indicates there is no
+ held root. This feature is not yet implemented so '-' is
+ always returned.
+
+iii) Messages
+
+ create_thin <dev id>
+
+ Create a new thinly-provisioned device.
+ <dev id> is an arbitrary unique 24-bit identifier chosen by
+ the caller.
+
+ create_snap <dev id> <origin id>
+
+ Create a new snapshot of another thinly-provisioned device.
+ <dev id> is an arbitrary unique 24-bit identifier chosen by
+ the caller.
+ <origin id> is the identifier of the thinly-provisioned device
+ of which the new device will be a snapshot.
+
+ delete <dev id>
+
+ Deletes a thin device. Irreversible.
+
+ trim <dev id> <new size in sectors>
+
+ Delete mappings from the end of a thin device. Irreversible.
+ You might want to use this if you're reducing the size of
+ your thinly-provisioned device. In many cases, due to the
+ sharing of blocks between devices, it is not possible to
+ determine in advance how much space 'trim' will release. (In
+ future a userspace tool might be able to perform this
+ calculation.)
+
+ set_transaction_id <current id> <new id>
+
+ Userland volume managers, such as LVM, need a way to
+ synchronise their external metadata with the internal metadata of the
+ pool target. The thin-pool target offers to store an
+ arbitrary 64-bit transaction id and return it on the target's
+ status line. To avoid races you must provide what you think
+ the current transaction id is when you change it with this
+ compare-and-swap message.
+
+'thin' target
+-------------
+
+i) Constructor
+
+ thin <pool dev> <dev id>
+
+ pool dev:
+ the thin-pool device, e.g. /dev/mapper/my_pool or 253:0
+
+ dev id:
+ the internal device identifier of the device to be
+ activated.
+
+The pool doesn't store any size against the thin devices. If you
+load a thin target that is smaller than you've been using previously,
+then you'll have no access to blocks mapped beyond the end. If you
+load a target that is bigger than before, then extra blocks will be
+provisioned as and when needed.
+
+If you wish to reduce the size of your thin device and potentially
+regain some space then send the 'trim' message to the pool.
+
+ii) Status
+
+ <nr mapped sectors> <highest mapped sector>
diff --git a/Documentation/devicetree/bindings/arm/calxeda.txt b/Documentation/devicetree/bindings/arm/calxeda.txt
new file mode 100644
index 0000000..4755caa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda.txt
@@ -0,0 +1,8 @@
+Calxeda Highbank Platforms Device Tree Bindings
+-----------------------------------------------
+
+Boards with Calxeda Cortex-A9 based Highbank SOC shall have the following
+properties.
+
+Required root node properties:
+ - compatible = "calxeda,highbank";
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
new file mode 100644
index 0000000..c9848ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -0,0 +1,26 @@
+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+i.MX51 Babbage Board
+Required root node properties:
+ - compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+i.MX53 Automotive Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-ard", "fsl,imx53";
+
+i.MX53 Evaluation Kit
+Required root node properties:
+ - compatible = "fsl,imx53-evk", "fsl,imx53";
+
+i.MX53 Quick Start Board
+Required root node properties:
+ - compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+i.MX53 Smart Mobile Reference Design Board
+Required root node properties:
+ - compatible = "fsl,imx53-smd", "fsl,imx53";
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
new file mode 100644
index 0000000..52916b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -0,0 +1,55 @@
+* ARM Generic Interrupt Controller
+
+ARM SMP cores are often associated with a GIC, providing per processor
+interrupts (PPI), shared processor interrupts (SPI) and software
+generated interrupts (SGI).
+
+Primary GIC is attached directly to the CPU and typically has PPIs and SGIs.
+Secondary GICs are cascaded into the upward interrupt controller and do not
+have PPIs or SGIs.
+
+Main node required properties:
+
+- compatible : should be one of:
+ "arm,cortex-a9-gic"
+ "arm,arm11mp-gic"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The type shall be a <u32> and the value shall be 3.
+
+ The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+ interrupts.
+
+ The 2nd cell contains the interrupt number for the interrupt type.
+ SPI interrupts are in the range [0-987]. PPI interrupts are in the
+ range [0-15].
+
+ The 3rd cell is the flags, encoded as follows:
+ bits[3:0] trigger type and level flags.
+ 1 = low-to-high edge triggered
+ 2 = high-to-low edge triggered
+ 4 = active high level-sensitive
+ 8 = active low level-sensitive
+ bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of
+ the 8 possible cpus attached to the GIC. A bit set to '1' indicated
+ the interrupt is wired to that CPU. Only valid for PPI interrupts.
+
+- reg : Specifies base physical address(s) and size of the GIC registers. The
+ first region is the GIC distributor register base and size. The 2nd region is
+ the GIC cpu interface register base and size.
+
+Optional
+- interrupts : Interrupt source of the parent interrupt controller. Only
+ present on secondary GICs.
+
+Example:
+
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
diff --git a/Documentation/devicetree/bindings/arm/omap/dsp.txt b/Documentation/devicetree/bindings/arm/omap/dsp.txt
new file mode 100644
index 0000000..d3830a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/dsp.txt
@@ -0,0 +1,14 @@
+* TI - DSP (Digital Signal Processor)
+
+TI DSP included in OMAP SoC
+
+Required properties:
+- compatible : Should be "ti,omap3-c64" for OMAP3 & 4
+- ti,hwmods: "dsp"
+
+Examples:
+
+dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/iva.txt b/Documentation/devicetree/bindings/arm/omap/iva.txt
new file mode 100644
index 0000000..6d62951
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/iva.txt
@@ -0,0 +1,19 @@
+* TI - IVA (Imaging and Video Accelerator) subsystem
+
+The IVA contain various audio, video or imaging HW accelerator
+depending of the version.
+
+Required properties:
+- compatible : Should be:
+ - "ti,ivahd" for OMAP4
+ - "ti,iva2.2" for OMAP3
+ - "ti,iva2.1" for OMAP2430
+ - "ti,iva1" for OMAP2420
+- ti,hwmods: "iva"
+
+Examples:
+
+iva {
+ compatible = "ti,ivahd", "ti,iva";
+ ti,hwmods = "iva";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
new file mode 100644
index 0000000..6888a5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -0,0 +1,19 @@
+* TI - L3 Network On Chip (NoC)
+
+This version is an implementation of the generic NoC IP
+provided by Arteris.
+
+Required properties:
+- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
+ Should be "ti,omap4-l3-noc" for OMAP4 family
+- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
+
+Examples:
+
+ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/mpu.txt b/Documentation/devicetree/bindings/arm/omap/mpu.txt
new file mode 100644
index 0000000..1a5a42c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/mpu.txt
@@ -0,0 +1,27 @@
+* TI - MPU (Main Processor Unit) subsystem
+
+The MPU subsystem contain one or several ARM cores
+depending of the version.
+The MPU contain CPUs, GIC, L2 cache and a local PRCM.
+
+Required properties:
+- compatible : Should be "ti,omap3-mpu" for OMAP3
+ Should be "ti,omap4-mpu" for OMAP4
+- ti,hwmods: "mpu"
+
+Examples:
+
+- For an OMAP4 SMP system:
+
+mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+};
+
+
+- For an OMAP3 monocore system:
+
+mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
new file mode 100644
index 0000000..dbdab40
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -0,0 +1,43 @@
+* Texas Instruments OMAP
+
+OMAP is currently using a static file per SoC family to describe the
+IPs present in the SoC.
+On top of that an omap_device is created to extend the platform_device
+capabilities and to allow binding with one or several hwmods.
+The hwmods will contain all the information to build the device:
+adresse range, irq lines, dma lines, interconnect, PRCM register,
+clock domain, input clocks.
+For the moment just point to the existing hwmod, the next step will be
+to move data from hwmod to device-tree representation.
+
+
+Required properties:
+- compatible: Every devices present in OMAP SoC should be in the
+ form: "ti,XXX"
+- ti,hwmods: list of hwmod names (ascii strings), that comes from the OMAP
+ HW documentation, attached to a device. Must contain at least
+ one hwmod.
+
+Optional properties:
+- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
+ during suspend.
+
+
+Example:
+
+spinlock@1 {
+ compatible = "ti,omap4-spinlock";
+ ti,hwmods = "spinlock";
+};
+
+
+Boards:
+
+- OMAP3 BeagleBoard : Low cost community board
+ compatible = "ti,omap3-beagle", "ti,omap3"
+
+- OMAP4 SDP : Software Developement Board
+ compatible = "ti,omap4-sdp", "ti,omap4430"
+
+- OMAP4 PandaBoard : Low cost community board
+ compatible = "ti,omap4-panda", "ti,omap4430"
diff --git a/Documentation/devicetree/bindings/arm/picoxcell.txt b/Documentation/devicetree/bindings/arm/picoxcell.txt
new file mode 100644
index 0000000..e75c0ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/picoxcell.txt
@@ -0,0 +1,24 @@
+Picochip picoXcell device tree bindings.
+========================================
+
+Required root node properties:
+ - compatible:
+ - "picochip,pc7302-pc3x3" : PC7302 development board with PC3X3 device.
+ - "picochip,pc7302-pc3x2" : PC7302 development board with PC3X2 device.
+ - "picochip,pc3x3" : picoXcell PC3X3 device based board.
+ - "picochip,pc3x2" : picoXcell PC3X2 device based board.
+
+Timers required properties:
+ - compatible = "picochip,pc3x2-timer"
+ - interrupts : The single IRQ line for the timer.
+ - clock-freq : The frequency in HZ of the timer.
+ - reg : The register bank for the timer.
+
+Note: two timers are required - one for the scheduler clock and one for the
+event tick/NOHZ.
+
+VIC required properties:
+ - compatible = "arm,pl192-vic".
+ - interrupt-controller.
+ - reg : The register bank for the device.
+ - #interrupt-cells : Must be 1.
diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
new file mode 100644
index 0000000..79caa56
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/calxeda-sata.txt
@@ -0,0 +1,17 @@
+* Calxeda SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "calxeda,hb-ahci"
+- interrupts : <interrupt mapping for SATA IRQ>
+- reg : <registers mapping>
+
+Example:
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ };
+
diff --git a/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
new file mode 100644
index 0000000..f3cf43b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
@@ -0,0 +1,25 @@
+* Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
+
+Required properties:
+- compatible : Should be "fsl,<chip>-i2c"
+- reg : Should contain I2C/HS-I2C registers location and length
+- interrupts : Should contain I2C/HS-I2C interrupt
+
+Optional properties:
+- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
+ The absence of the propoerty indicates the default frequency 100 kHz.
+
+Examples:
+
+i2c@83fc4000 { /* I2C2 on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+};
+
+i2c@70038000 { /* HS-I2C on i.MX51 */
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x70038000 0x4000>;
+ interrupts = <64>;
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/samsung-i2c.txt b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
new file mode 100644
index 0000000..38832c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung-i2c.txt
@@ -0,0 +1,39 @@
+* Samsung's I2C controller
+
+The Samsung's I2C controller is used to interface with I2C devices.
+
+Required properties:
+ - compatible: value should be either of the following.
+ (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
+ (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+ - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
+ - gpios: The order of the gpios should be the following: <SDA, SCL>.
+ The gpio specifier depends on the gpio controller.
+
+Optional properties:
+ - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+ specified, default value is 0.
+ - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
+ specified, the default value in Hz is 100000.
+
+Example:
+
+ i2c@13870000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <345>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <100000>;
+ gpios = <&gpd1 2 0 /* SDA */
+ &gpd1 3 0 /* SCL */>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt b/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
new file mode 100644
index 0000000..36f82db
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
@@ -0,0 +1,5 @@
+NVIDIA Tegra 2 pinmux controller
+
+Required properties:
+- compatible : "nvidia,tegra20-pinmux"
+
diff --git a/Documentation/devicetree/bindings/tty/serial/msm_serial.txt b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
new file mode 100644
index 0000000..aef383e
--- /dev/null
+++ b/Documentation/devicetree/bindings/tty/serial/msm_serial.txt
@@ -0,0 +1,27 @@
+* Qualcomm MSM UART
+
+Required properties:
+- compatible :
+ - "qcom,msm-uart", and one of "qcom,msm-hsuart" or
+ "qcom,msm-lsuart".
+- reg : offset and length of the register set for the device
+ for the hsuart operating in compatible mode, there should be a
+ second pair describing the gsbi registers.
+- interrupts : should contain the uart interrupt.
+
+There are two different UART blocks used in MSM devices,
+"qcom,msm-hsuart" and "qcom,msm-lsuart". The msm-serial driver is
+able to handle both of these, and matches against the "qcom,msm-uart"
+as the compatibility.
+
+The registers for the "qcom,msm-hsuart" device need to specify both
+register blocks, even for the common driver.
+
+Example:
+
+ uart@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
diff --git a/Documentation/devicetree/bindings/virtio/mmio.txt b/Documentation/devicetree/bindings/virtio/mmio.txt
new file mode 100644
index 0000000..5069c1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/virtio/mmio.txt
@@ -0,0 +1,17 @@
+* virtio memory mapped device
+
+See http://ozlabs.org/~rusty/virtio-spec/ for more details.
+
+Required properties:
+
+- compatible: "virtio,mmio" compatibility string
+- reg: control registers base address and size including configuration space
+- interrupts: interrupt generated by the device
+
+Example:
+
+ virtio_block@3000 {
+ compatible = "virtio,mmio";
+ reg = <0x3000 0x100>;
+ interrupts = <41>;
+ }
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 7c799fc..3d84912 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -133,41 +133,6 @@
---------------------------
-What: sys_sysctl
-When: September 2010
-Option: CONFIG_SYSCTL_SYSCALL
-Why: The same information is available in a more convenient from
- /proc/sys, and none of the sysctl variables appear to be
- important performance wise.
-
- Binary sysctls are a long standing source of subtle kernel
- bugs and security issues.
-
- When I looked several months ago all I could find after
- searching several distributions were 5 user space programs and
- glibc (which falls back to /proc/sys) using this syscall.
-
- The man page for sysctl(2) documents it as unusable for user
- space programs.
-
- sysctl(2) is not generally ABI compatible to a 32bit user
- space application on a 64bit and a 32bit kernel.
-
- For the last several months the policy has been no new binary
- sysctls and no one has put forward an argument to use them.
-
- Binary sysctls issues seem to keep happening appearing so
- properly deprecating them (with a warning to user space) and a
- 2 year grace warning period will mean eventually we can kill
- them and end the pain.
-
- In the mean time individual binary sysctls can be dealt with
- in a piecewise fashion.
-
-Who: Eric Biederman <ebiederm@xmission.com>
-
----------------------------
-
What: /proc/<pid>/oom_adj
When: August 2012
Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 6533807..d819ba1 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -29,6 +29,7 @@
d_compare: yes no no maybe
d_delete: no yes no no
d_release: no no yes no
+d_prune: no yes no no
d_iput: no no yes no
d_dname: no no no no
d_automount: no no yes no
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 22f3a0e..b100adc 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -73,14 +73,6 @@
also be used to enable or disable barriers, for
consistency with other ext3 mount options.
-orlov (*) This enables the new Orlov block allocator. It is
- enabled by default.
-
-oldalloc This disables the Orlov block allocator and enables
- the old block allocator. Orlov should have better
- performance - we'd like to get some feedback if it's
- the contrary for you.
-
user_xattr Enables Extended User Attributes. Additionally, you
need to have extended attribute support enabled in the
kernel configuration (CONFIG_EXT3_FS_XATTR). See the
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 232a575..4917cf2 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -160,7 +160,9 @@
lead to any number of problems.
data=journal All data are committed into the journal prior to being
- written into the main file system.
+ written into the main file system. Enabling
+ this mode will disable delayed allocation and
+ O_DIRECT support.
data=ordered (*) All data are forced directly out to the main file
system prior to its metadata being committed to the
@@ -201,30 +203,19 @@
table readahead algorithm will pre-read into
the buffer cache. The default value is 32 blocks.
-orlov (*) This enables the new Orlov block allocator. It is
- enabled by default.
-
-oldalloc This disables the Orlov block allocator and enables
- the old block allocator. Orlov should have better
- performance - we'd like to get some feedback if it's
- the contrary for you.
-
-user_xattr Enables Extended User Attributes. Additionally, you
- need to have extended attribute support enabled in the
- kernel configuration (CONFIG_EXT4_FS_XATTR). See the
- attr(5) manual page and http://acl.bestbits.at/ to
- learn more about extended attributes.
-
-nouser_xattr Disables Extended User Attributes.
-
-acl Enables POSIX Access Control Lists support.
- Additionally, you need to have ACL support enabled in
- the kernel configuration (CONFIG_EXT4_FS_POSIX_ACL).
- See the acl(5) manual page and http://acl.bestbits.at/
- for more information.
+nouser_xattr Disables Extended User Attributes. If you have extended
+ attribute support enabled in the kernel configuration
+ (CONFIG_EXT4_FS_XATTR), extended attribute support
+ is enabled by default on mount. See the attr(5) manual
+ page and http://acl.bestbits.at/ for more information
+ about extended attributes.
noacl This option disables POSIX Access Control List
- support.
+ support. If ACL support is enabled in the kernel
+ configuration (CONFIG_EXT4_FS_POSIX_ACL), ACL is
+ enabled by default on mount. See the acl(5) manual
+ page and http://acl.bestbits.at/ for more information
+ about acl.
bsddf (*) Make 'df' act like BSD.
minixdf Make 'df' act like Minix.
@@ -419,8 +410,8 @@
In the event of a crash, the journal can be replayed, bringing both data and
metadata into a consistent state. This mode is the slowest except when data
needs to be read from and written to disk at the same time where it
-outperforms all others modes. Currently ext4 does not have delayed
-allocation support if this data journalling mode is selected.
+outperforms all others modes. Enabling this mode will disable delayed
+allocation and O_DIRECT support.
/proc entries
=============
diff --git a/Documentation/filesystems/hfs.txt b/Documentation/filesystems/hfs.txt
index bd0fa77..d096df6 100644
--- a/Documentation/filesystems/hfs.txt
+++ b/Documentation/filesystems/hfs.txt
@@ -1,3 +1,4 @@
+Note: This filesystem doesn't have a maintainer.
Macintosh HFS Filesystem for Linux
==================================
@@ -76,8 +77,6 @@
Credits
=======
-The HFS drivers was written by Paul H. Hargrovea (hargrove@sccm.Stanford.EDU)
-and is now maintained by Roman Zippel (roman@ardistech.com) at Ardis
-Technologies.
-Roman rewrote large parts of the code and brought in btree routines derived
-from Brad Boyer's hfsplus driver (also maintained by Roman now).
+The HFS drivers was written by Paul H. Hargrovea (hargrove@sccm.Stanford.EDU).
+Roman Zippel (roman@ardistech.com) rewrote large parts of the code and brought
+in btree routines derived from Brad Boyer's hfsplus driver.
diff --git a/Documentation/filesystems/inotify.txt b/Documentation/filesystems/inotify.txt
index 59a919f..cfd0271 100644
--- a/Documentation/filesystems/inotify.txt
+++ b/Documentation/filesystems/inotify.txt
@@ -194,7 +194,8 @@
Each watch is associated with an inotify_watch structure. Watches are chained
off of each associated inotify_handle and each associated inode.
-See fs/inotify.c and fs/inotify_user.c for the locking and lifetime rules.
+See fs/notify/inotify/inotify_fsnotify.c and fs/notify/inotify/inotify_user.c
+for the locking and lifetime rules.
(vi) Rationale
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 76ffef9..3f44dbd 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -14,6 +14,10 @@
Prefix: 'w83627dhg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: not available
+ * Winbond W83627UHG
+ Prefix: 'w83627uhg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: available from www.nuvoton.com
* Winbond W83667HG
Prefix: 'w83667hg'
Addresses scanned: ISA address retrieved from Super I/O registers
@@ -42,14 +46,13 @@
-----------
This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P, W83667HG, W83667HG-B, W83667HG-I (NCT6775F),
-and NCT6776F super I/O chips. We will refer to them collectively as
-Winbond chips.
+W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
+(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
+as Winbond chips.
-The chips implement three temperature sensors (up to four for 667HG-B, and nine
-for NCT6775F and NCT6776F), five fan rotation speed sensors, ten analog voltage
-sensors (only nine for the 627DHG), one VID (6 pins for the 627EHF/EHG, 8 pins
-for the 627DHG and 667HG), alarms with beep warnings (control unimplemented),
+The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
+(except for 627UHG), alarms with beep warnings (control unimplemented),
and some automatic fan regulation strategies (plus manual fan control mode).
The temperature sensor sources on W82677HG-B, NCT6775F, and NCT6776F are
@@ -86,17 +89,16 @@
temp1 -> pwm1
temp2 -> pwm2
-temp3 -> pwm3
+temp3 -> pwm3 (not on 627UHG)
prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
supported by the driver)
/sys files
----------
-name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
- it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
- for the W83667HG and W83667HG-B it is set to "w83667hg", for NCT6775F it
- is set to "nct6775", and for NCT6776F it is set to "nct6776".
+name - this is a standard hwmon device entry, it contains the name of
+ the device (see the prefix in the list of supported devices at
+ the top of this file)
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt
index 7dcd1a4..a903ee5 100644
--- a/Documentation/hwspinlock.txt
+++ b/Documentation/hwspinlock.txt
@@ -39,23 +39,20 @@
in case an unused hwspinlock isn't available. Users of this
API will usually want to communicate the lock's id to the remote core
before it can be used to achieve synchronization.
- Can be called from an atomic context (this function will not sleep) but
- not from within interrupt context.
+ Should be called from a process context (might sleep).
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
- assign a specific hwspinlock id and return its address, or NULL
if that hwspinlock is already in use. Usually board code will
be calling this function in order to reserve specific hwspinlock
ids for predefined purposes.
- Can be called from an atomic context (this function will not sleep) but
- not from within interrupt context.
+ Should be called from a process context (might sleep).
int hwspin_lock_free(struct hwspinlock *hwlock);
- free a previously-assigned hwspinlock; returns 0 on success, or an
appropriate error code on failure (e.g. -EINVAL if the hwspinlock
is already free).
- Can be called from an atomic context (this function will not sleep) but
- not from within interrupt context.
+ Should be called from a process context (might sleep).
int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout);
- lock a previously-assigned hwspinlock with a timeout limit (specified in
@@ -230,45 +227,62 @@
4. API for implementors
- int hwspin_lock_register(struct hwspinlock *hwlock);
+ int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+ const struct hwspinlock_ops *ops, int base_id, int num_locks);
- to be called from the underlying platform-specific implementation, in
- order to register a new hwspinlock instance. Can be called from an atomic
- context (this function will not sleep) but not from within interrupt
- context. Returns 0 on success, or appropriate error code on failure.
+ order to register a new hwspinlock device (which is usually a bank of
+ numerous locks). Should be called from a process context (this function
+ might sleep).
+ Returns 0 on success, or appropriate error code on failure.
- struct hwspinlock *hwspin_lock_unregister(unsigned int id);
+ int hwspin_lock_unregister(struct hwspinlock_device *bank);
- to be called from the underlying vendor-specific implementation, in order
- to unregister an existing (and unused) hwspinlock instance.
- Can be called from an atomic context (will not sleep) but not from
- within interrupt context.
+ to unregister an hwspinlock device (which is usually a bank of numerous
+ locks).
+ Should be called from a process context (this function might sleep).
Returns the address of hwspinlock on success, or NULL on error (e.g.
if the hwspinlock is sill in use).
-5. struct hwspinlock
+5. Important structs
-This struct represents an hwspinlock instance. It is registered by the
-underlying hwspinlock implementation using the hwspin_lock_register() API.
+struct hwspinlock_device is a device which usually contains a bank
+of hardware locks. It is registered by the underlying hwspinlock
+implementation using the hwspin_lock_register() API.
/**
- * struct hwspinlock - vendor-specific hwspinlock implementation
- *
- * @dev: underlying device, will be used with runtime PM api
- * @ops: vendor-specific hwspinlock handlers
- * @id: a global, unique, system-wide, index of the lock.
- * @lock: initialized and used by hwspinlock core
- * @owner: underlying implementation module, used to maintain module ref count
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
*/
-struct hwspinlock {
+struct hwspinlock_device {
struct device *dev;
const struct hwspinlock_ops *ops;
- int id;
- spinlock_t lock;
- struct module *owner;
+ int base_id;
+ int num_locks;
+ struct hwspinlock lock[0];
};
-The underlying implementation is responsible to assign the dev, ops, id and
-owner members. The lock member, OTOH, is initialized and used by the hwspinlock
-core.
+struct hwspinlock_device contains an array of hwspinlock structs, each
+of which represents a single hardware lock:
+
+/**
+ * struct hwspinlock - this struct represents a single hwspinlock instance
+ * @bank: the hwspinlock_device structure which owns this lock
+ * @lock: initialized and used by hwspinlock core
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
+ */
+struct hwspinlock {
+ struct hwspinlock_device *bank;
+ spinlock_t lock;
+ void *priv;
+};
+
+When registering a bank of locks, the hwspinlock driver only needs to
+set the priv members of the locks. The rest of the members are set and
+initialized by the hwspinlock core itself.
6. Implementation callbacks
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 3ff0dad..9d66682 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -411,9 +411,9 @@
0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
semantics, i.e. sleep-to-RAM).
- It is always generate some kind
+ It always generates some kind
of event, either the hot key
- event or a ACPI sleep button
+ event or an ACPI sleep button
event. The firmware may
refuse to generate further FN+F4
key presses until a S3 or S4 ACPI
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index 4996586..79699c2 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -61,8 +61,8 @@
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
blink_set() function (see <linux/leds.h>). To set an LED to blinking,
-however, it is better to use use the API function led_blink_set(),
-as it will check and implement software fallback if necessary.
+however, it is better to use the API function led_blink_set(), as it
+will check and implement software fallback if necessary.
To turn off blinking again, use the API function led_brightness_set()
as that will not just set the LED brightness but also stop any software
diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt
index 4ccdbca..f2a2488 100644
--- a/Documentation/networking/ipvs-sysctl.txt
+++ b/Documentation/networking/ipvs-sysctl.txt
@@ -15,6 +15,23 @@
enabled and the variable is automatically set to 2, otherwise
the strategy is disabled and the variable is set to 1.
+conntrack - BOOLEAN
+ 0 - disabled (default)
+ not 0 - enabled
+
+ If set, maintain connection tracking entries for
+ connections handled by IPVS.
+
+ This should be enabled if connections handled by IPVS are to be
+ also handled by stateful firewall rules. That is, iptables rules
+ that make use of connection tracking. It is a performance
+ optimisation to disable this setting otherwise.
+
+ Connections handled by the IPVS FTP application module
+ will have connection tracking entries regardless of this setting.
+
+ Only available when IPVS is compiled with CONFIG_IP_VS_NFCT enabled.
+
cache_bypass - BOOLEAN
0 - disabled (default)
not 0 - enabled
@@ -39,7 +56,7 @@
11 - IPVS packet handling (ip_vs_in/ip_vs_out)
12 or more - packet traversal
- Only available when IPVS is compiled with the CONFIG_IPVS_DEBUG
+ Only available when IPVS is compiled with CONFIG_IP_VS_DEBUG enabled.
Higher debugging levels include the messages for lower debugging
levels, so setting debug level 2, includes level 0, 1 and 2
@@ -123,13 +140,11 @@
secure_tcp - INTEGER
0 - disabled (default)
- The secure_tcp defense is to use a more complicated state
- transition table and some possible short timeouts of each
- state. In the VS/NAT, it delays the entering the ESTABLISHED
- until the real server starts to send data and ACK packet
- (after 3-way handshake).
+ The secure_tcp defense is to use a more complicated TCP state
+ transition table. For VS/NAT, it also delays entering the
+ TCP ESTABLISHED state until the three way handshake is completed.
- The value definition is the same as that of drop_entry or
+ The value definition is the same as that of drop_entry and
drop_packet.
sync_threshold - INTEGER
@@ -141,3 +156,36 @@
synchronized, every time the number of its incoming packets
modulus 50 equals the threshold. The range of the threshold is
from 0 to 49.
+
+snat_reroute - BOOLEAN
+ 0 - disabled
+ not 0 - enabled (default)
+
+ If enabled, recalculate the route of SNATed packets from
+ realservers so that they are routed as if they originate from the
+ director. Otherwise they are routed as if they are forwarded by the
+ director.
+
+ If policy routing is in effect then it is possible that the route
+ of a packet originating from a director is routed differently to a
+ packet being forwarded by the director.
+
+ If policy routing is not in effect then the recalculated route will
+ always be the same as the original route so it is an optimisation
+ to disable snat_reroute and avoid the recalculation.
+
+sync_version - INTEGER
+ default 1
+
+ The version of the synchronisation protocol used when sending
+ synchronisation messages.
+
+ 0 selects the original synchronisation protocol (version 0). This
+ should be used when sending synchronisation messages to a legacy
+ system that only understands the original synchronisation protocol.
+
+ 1 selects the current synchronisation protocol (version 1). This
+ should be used where possible.
+
+ Kernels with this sync_version entry are able to receive messages
+ of both version 1 and version 2 of the synchronisation protocol.
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index b42419b..ce63af0 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -16,7 +16,7 @@
each regulator.
struct regulator_consumer_supply {
- struct device *dev; /* consumer */
+ const char *dev_name; /* consumer dev_name() */
const char *supply; /* consumer supply - e.g. "vcc" */
};
@@ -24,13 +24,13 @@
static struct regulator_consumer_supply regulator1_consumers[] = {
{
- .dev = &platform_consumerB_device.dev,
- .supply = "Vcc",
+ .dev_name = "dev_name(consumer B)",
+ .supply = "Vcc",
},};
static struct regulator_consumer_supply regulator2_consumers[] = {
{
- .dev = &platform_consumerA_device.dev,
+ .dev = "dev_name(consumer A"),
.supply = "Vcc",
},};
@@ -43,6 +43,7 @@
static struct regulator_init_data regulator1_data = {
.constraints = {
+ .name = "Regulator-1",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
@@ -51,13 +52,19 @@
.consumer_supplies = regulator1_consumers,
};
+The name field should be set to something that is usefully descriptive
+for the board for configuration of supplies for other regulators and
+for use in logging and other diagnostic output. Normally the name
+used for the supply rail in the schematic is a good choice. If no
+name is provided then the subsystem will choose one.
+
Regulator-1 supplies power to Regulator-2. This relationship must be registered
with the core so that Regulator-1 is also enabled when Consumer A enables its
supply (Regulator-2). The supply regulator is set by the supply_regulator
-field below:-
+field below and co:-
static struct regulator_init_data regulator2_data = {
- .supply_regulator = "regulator_name",
+ .supply_regulator = "Regulator-1",
.constraints = {
.min_uV = 1800000,
.max_uV = 2000000,
diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt
index be70ee1..c75694b 100644
--- a/Documentation/rapidio/rapidio.txt
+++ b/Documentation/rapidio/rapidio.txt
@@ -144,7 +144,7 @@
After the host has completed enumeration of the entire network it releases
devices by clearing device ID locks (calls rio_clear_locks()). For each endpoint
-in the system, it sets the Master Enable bit in the Port General Control CSR
+in the system, it sets the Discovered bit in the Port General Control CSR
to indicate that enumeration is completed and agents are allowed to execute
passive discovery of the network.
diff --git a/Documentation/rapidio/tsi721.txt b/Documentation/rapidio/tsi721.txt
new file mode 100644
index 0000000..335f3c6
--- /dev/null
+++ b/Documentation/rapidio/tsi721.txt
@@ -0,0 +1,49 @@
+RapidIO subsystem mport driver for IDT Tsi721 PCI Express-to-SRIO bridge.
+=========================================================================
+
+I. Overview
+
+This driver implements all currently defined RapidIO mport callback functions.
+It supports maintenance read and write operations, inbound and outbound RapidIO
+doorbells, inbound maintenance port-writes and RapidIO messaging.
+
+To generate SRIO maintenance transactions this driver uses one of Tsi721 DMA
+channels. This mechanism provides access to larger range of hop counts and
+destination IDs without need for changes in outbound window translation.
+
+RapidIO messaging support uses dedicated messaging channels for each mailbox.
+For inbound messages this driver uses destination ID matching to forward messages
+into the corresponding message queue. Messaging callbacks are implemented to be
+fully compatible with RIONET driver (Ethernet over RapidIO messaging services).
+
+II. Known problems
+
+ None.
+
+III. To do
+
+ Add DMA data transfers (non-messaging).
+ Add inbound region (SRIO-to-PCIe) mapping.
+
+IV. Version History
+
+ 1.0.0 - Initial driver release.
+
+V. License
+-----------------------------------------------
+
+ Copyright(c) 2011 Integrated Device Technology, Inc. All rights reserved.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2 of the License, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt
index 60a6f65..39ddcdb 100644
--- a/Documentation/serial/computone.txt
+++ b/Documentation/serial/computone.txt
@@ -20,8 +20,6 @@
Date: 11/01/2001
Historical Author: Andrew Manison <amanison@america.net>
Primary Author: Doug McNash
-Support: support@computone.com
-Fixes and Updates: Mike Warfield <mhw@wittsend.com>
This file assumes that you are using the Computone drivers which are
integrated into the kernel sources. For updating the drivers or installing
diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
index 5d0fc8b..77dfecf 100644
--- a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt
@@ -134,13 +134,13 @@
______________________________________________________________________
- 11.. IInnttrroodduuccttiioonn
+ 1. Introduction
Welcome to User Mode Linux. It's going to be fun.
- 11..11.. HHooww iiss UUsseerr MMooddee LLiinnuuxx DDiiffffeerreenntt??
+ 1.1. How is User Mode Linux Different?
Normally, the Linux Kernel talks straight to your hardware (video
card, keyboard, hard drives, etc), and any programs which run ask the
@@ -181,7 +181,7 @@
- 11..22.. WWhhyy WWoouulldd II WWaanntt UUsseerr MMooddee LLiinnuuxx??
+ 1.2. Why Would I Want User Mode Linux?
1. If User Mode Linux crashes, your host kernel is still fine.
@@ -206,12 +206,12 @@
- 22.. CCoommppiilliinngg tthhee kkeerrnneell aanndd mmoodduulleess
+ 2. Compiling the kernel and modules
- 22..11.. CCoommppiilliinngg tthhee kkeerrnneell
+ 2.1. Compiling the kernel
Compiling the user mode kernel is just like compiling any other
@@ -322,7 +322,7 @@
bug fixes and enhancements that have gone into subsequent releases.
- 22..22.. CCoommppiilliinngg aanndd iinnssttaalllliinngg kkeerrnneell mmoodduulleess
+ 2.2. Compiling and installing kernel modules
UML modules are built in the same way as the native kernel (with the
exception of the 'ARCH=um' that you always need for UML):
@@ -386,19 +386,19 @@
- 22..33.. CCoommppiilliinngg aanndd iinnssttaalllliinngg uummll__uuttiilliittiieess
+ 2.3. Compiling and installing uml_utilities
Many features of the UML kernel require a user-space helper program,
so a uml_utilities package is distributed separately from the kernel
patch which provides these helpers. Included within this is:
- +o port-helper - Used by consoles which connect to xterms or ports
+ o port-helper - Used by consoles which connect to xterms or ports
- +o tunctl - Configuration tool to create and delete tap devices
+ o tunctl - Configuration tool to create and delete tap devices
- +o uml_net - Setuid binary for automatic tap device configuration
+ o uml_net - Setuid binary for automatic tap device configuration
- +o uml_switch - User-space virtual switch required for daemon
+ o uml_switch - User-space virtual switch required for daemon
transport
The uml_utilities tree is compiled with:
@@ -423,11 +423,11 @@
- 33.. RRuunnnniinngg UUMMLL aanndd llooggggiinngg iinn
+ 3. Running UML and logging in
- 33..11.. RRuunnnniinngg UUMMLL
+ 3.1. Running UML
It runs on 2.2.15 or later, and all 2.4 kernels.
@@ -454,7 +454,7 @@
- 33..22.. LLooggggiinngg iinn
+ 3.2. Logging in
@@ -468,7 +468,7 @@
There are a couple of other ways to log in:
- +o On a virtual console
+ o On a virtual console
@@ -480,7 +480,7 @@
- +o Over the serial line
+ o Over the serial line
In the boot output, find a line that looks like:
@@ -503,7 +503,7 @@
- +o Over the net
+ o Over the net
If the network is running, then you can telnet to the virtual
@@ -514,13 +514,13 @@
down and the process will exit.
- 33..33.. EExxaammpplleess
+ 3.3. Examples
Here are some examples of UML in action:
- +o A login session <http://user-mode-linux.sourceforge.net/login.html>
+ o A login session <http://user-mode-linux.sourceforge.net/login.html>
- +o A virtual network <http://user-mode-linux.sourceforge.net/net.html>
+ o A virtual network <http://user-mode-linux.sourceforge.net/net.html>
@@ -528,12 +528,12 @@
- 44.. UUMMLL oonn 22GG//22GG hhoossttss
+ 4. UML on 2G/2G hosts
- 44..11.. IInnttrroodduuccttiioonn
+ 4.1. Introduction
Most Linux machines are configured so that the kernel occupies the
@@ -546,7 +546,7 @@
- 44..22.. TThhee pprroobblleemm
+ 4.2. The problem
The prebuilt UML binaries on this site will not run on 2G/2G hosts
@@ -558,7 +558,7 @@
- 44..33.. TThhee ssoolluuttiioonn
+ 4.3. The solution
The fix for this is to rebuild UML from source after enabling
@@ -576,7 +576,7 @@
- 55.. SSeettttiinngg uupp sseerriiaall lliinneess aanndd ccoonnssoolleess
+ 5. Setting up serial lines and consoles
It is possible to attach UML serial lines and consoles to many types
@@ -586,12 +586,12 @@
You can attach them to host ptys, ttys, file descriptors, and ports.
This allows you to do things like
- +o have a UML console appear on an unused host console,
+ o have a UML console appear on an unused host console,
- +o hook two virtual machines together by having one attach to a pty
+ o hook two virtual machines together by having one attach to a pty
and having the other attach to the corresponding tty
- +o make a virtual machine accessible from the net by attaching a
+ o make a virtual machine accessible from the net by attaching a
console to a port on the host.
@@ -599,7 +599,7 @@
- 55..11.. SSppeecciiffyyiinngg tthhee ddeevviiccee
+ 5.1. Specifying the device
Devices are specified with "con" or "ssl" (console or serial line,
respectively), optionally with a device number if you are talking
@@ -626,13 +626,13 @@
- 55..22.. SSppeecciiffyyiinngg tthhee cchhaannnneell
+ 5.2. Specifying the channel
There are a number of different types of channels to attach a UML
device to, each with a different way of specifying exactly what to
attach to.
- +o pseudo-terminals - device=pty pts terminals - device=pts
+ o pseudo-terminals - device=pty pts terminals - device=pts
This will cause UML to allocate a free host pseudo-terminal for the
@@ -640,20 +640,20 @@
log. You access it by attaching a terminal program to the
corresponding tty:
- +o screen /dev/pts/n
+ o screen /dev/pts/n
- +o screen /dev/ttyxx
+ o screen /dev/ttyxx
- +o minicom -o -p /dev/ttyxx - minicom seems not able to handle pts
+ o minicom -o -p /dev/ttyxx - minicom seems not able to handle pts
devices
- +o kermit - start it up, 'open' the device, then 'connect'
+ o kermit - start it up, 'open' the device, then 'connect'
- +o terminals - device=tty:tty device file
+ o terminals - device=tty:tty device file
This will make UML attach the device to the specified tty (i.e
@@ -672,7 +672,7 @@
- +o xterms - device=xterm
+ o xterms - device=xterm
UML will run an xterm and the device will be attached to it.
@@ -681,7 +681,7 @@
- +o Port - device=port:port number
+ o Port - device=port:port number
This will attach the UML devices to the specified host port.
@@ -725,7 +725,7 @@
- +o already-existing file descriptors - device=file descriptor
+ o already-existing file descriptors - device=file descriptor
If you set up a file descriptor on the UML command line, you can
@@ -743,7 +743,7 @@
- +o Nothing - device=null
+ o Nothing - device=null
This allows the device to be opened, in contrast to 'none', but
@@ -754,7 +754,7 @@
- +o None - device=none
+ o None - device=none
This causes the device to disappear.
@@ -770,7 +770,7 @@
- will cause serial line 3 to accept input on the host's /dev/tty3 and
+ will cause serial line 3 to accept input on the host's /dev/tty2 and
display output on an xterm. That's a silly example - the most common
use of this syntax is to reattach the main console to stdin and stdout
as shown above.
@@ -785,7 +785,7 @@
- 55..33.. EExxaammpplleess
+ 5.3. Examples
There are a number of interesting things you can do with this
capability.
@@ -838,7 +838,7 @@
prompt of the other virtual machine.
- 66.. SSeettttiinngg uupp tthhee nneettwwoorrkk
+ 6. Setting up the network
@@ -858,19 +858,19 @@
There are currently five transport types available for a UML virtual
machine to exchange packets with other hosts:
- +o ethertap
+ o ethertap
- +o TUN/TAP
+ o TUN/TAP
- +o Multicast
+ o Multicast
- +o a switch daemon
+ o a switch daemon
- +o slip
+ o slip
- +o slirp
+ o slirp
- +o pcap
+ o pcap
The TUN/TAP, ethertap, slip, and slirp transports allow a UML
instance to exchange packets with the host. They may be directed
@@ -893,28 +893,28 @@
With so many host transports, which one should you use? Here's when
you should use each one:
- +o ethertap - if you want access to the host networking and it is
+ o ethertap - if you want access to the host networking and it is
running 2.2
- +o TUN/TAP - if you want access to the host networking and it is
+ o TUN/TAP - if you want access to the host networking and it is
running 2.4. Also, the TUN/TAP transport is able to use a
preconfigured device, allowing it to avoid using the setuid uml_net
helper, which is a security advantage.
- +o Multicast - if you want a purely virtual network and you don't want
+ o Multicast - if you want a purely virtual network and you don't want
to set up anything but the UML
- +o a switch daemon - if you want a purely virtual network and you
+ o a switch daemon - if you want a purely virtual network and you
don't mind running the daemon in order to get somewhat better
performance
- +o slip - there is no particular reason to run the slip backend unless
+ o slip - there is no particular reason to run the slip backend unless
ethertap and TUN/TAP are just not available for some reason
- +o slirp - if you don't have root access on the host to setup
+ o slirp - if you don't have root access on the host to setup
networking, or if you don't want to allocate an IP to your UML
- +o pcap - not much use for actual network connectivity, but great for
+ o pcap - not much use for actual network connectivity, but great for
monitoring traffic on the host
Ethertap is available on 2.4 and works fine. TUN/TAP is preferred
@@ -926,7 +926,7 @@
exploit the helper's root privileges.
- 66..11.. GGeenneerraall sseettuupp
+ 6.1. General setup
First, you must have the virtual network enabled in your UML. If are
running a prebuilt kernel from this site, everything is already
@@ -995,7 +995,7 @@
- 66..22.. UUsseerrssppaaccee ddaaeemmoonnss
+ 6.2. Userspace daemons
You will likely need the setuid helper, or the switch daemon, or both.
They are both installed with the RPM and deb, so if you've installed
@@ -1011,7 +1011,7 @@
- 66..33.. SSppeecciiffyyiinngg eetthheerrnneett aaddddrreesssseess
+ 6.3. Specifying ethernet addresses
Below, you will see that the TUN/TAP, ethertap, and daemon interfaces
allow you to specify hardware addresses for the virtual ethernet
@@ -1023,11 +1023,11 @@
sufficient to guarantee a unique hardware address for the device. A
couple of exceptions are:
- +o Another set of virtual ethernet devices are on the same network and
+ o Another set of virtual ethernet devices are on the same network and
they are assigned hardware addresses using a different scheme which
may conflict with the UML IP address-based scheme
- +o You aren't going to use the device for IP networking, so you don't
+ o You aren't going to use the device for IP networking, so you don't
assign the device an IP address
If you let the driver provide the hardware address, you should make
@@ -1049,7 +1049,7 @@
- 66..44.. UUMMLL iinntteerrffaaccee sseettuupp
+ 6.4. UML interface setup
Once the network devices have been described on the command line, you
should boot UML and log in.
@@ -1131,7 +1131,7 @@
- 66..55.. MMuullttiiccaasstt
+ 6.5. Multicast
The simplest way to set up a virtual network between multiple UMLs is
to use the mcast transport. This was written by Harald Welte and is
@@ -1194,7 +1194,7 @@
- 66..66.. TTUUNN//TTAAPP wwiitthh tthhee uummll__nneett hheellppeerr
+ 6.6. TUN/TAP with the uml_net helper
TUN/TAP is the preferred mechanism on 2.4 to exchange packets with the
host. The TUN/TAP backend has been in UML since 2.4.9-3um.
@@ -1247,10 +1247,10 @@
There are a couple potential problems with running the TUN/TAP
transport on a 2.4 host kernel
- +o TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host
+ o TUN/TAP seems not to work on 2.4.3 and earlier. Upgrade the host
kernel or use the ethertap transport.
- +o With an upgraded kernel, TUN/TAP may fail with
+ o With an upgraded kernel, TUN/TAP may fail with
File descriptor in bad state
@@ -1269,7 +1269,7 @@
- 66..77.. TTUUNN//TTAAPP wwiitthh aa pprreeccoonnffiigguurreedd ttaapp ddeevviiccee
+ 6.7. TUN/TAP with a preconfigured tap device
If you prefer not to have UML use uml_net (which is somewhat
insecure), with UML 2.4.17-11, you can set up a TUN/TAP device
@@ -1277,7 +1277,7 @@
there is no need for root assistance. Setting up the device is done
as follows:
- +o Create the device with tunctl (available from the UML utilities
+ o Create the device with tunctl (available from the UML utilities
tarball)
@@ -1291,7 +1291,7 @@
where uid is the user id or username that UML will be run as. This
will tell you what device was created.
- +o Configure the device IP (change IP addresses and device name to
+ o Configure the device IP (change IP addresses and device name to
suit)
@@ -1303,7 +1303,7 @@
- +o Set up routing and arping if desired - this is my recipe, there are
+ o Set up routing and arping if desired - this is my recipe, there are
other ways of doing the same thing
@@ -1338,7 +1338,7 @@
utility which reads the information from a config file and sets up
devices at boot time.
- +o Rather than using up two IPs and ARPing for one of them, you can
+ o Rather than using up two IPs and ARPing for one of them, you can
also provide direct access to your LAN by the UML by using a
bridge.
@@ -1417,7 +1417,7 @@
Note that 'br0' should be setup using ifconfig with the existing IP
address of eth0, as eth0 no longer has its own IP.
- +o
+ o
Also, the /dev/net/tun device must be writable by the user running
@@ -1438,11 +1438,11 @@
devices and chgrp /dev/net/tun to that group with mode 664 or 660.
- +o Once the device is set up, run UML with 'eth0=tuntap,device name'
+ o Once the device is set up, run UML with 'eth0=tuntap,device name'
(i.e. 'eth0=tuntap,tap0') on the command line (or do it with the
mconsole config command).
- +o Bring the eth device up in UML and you're in business.
+ o Bring the eth device up in UML and you're in business.
If you don't want that tap device any more, you can make it non-
persistent with
@@ -1465,7 +1465,7 @@
- 66..88.. EEtthheerrttaapp
+ 6.8. Ethertap
Ethertap is the general mechanism on 2.2 for userspace processes to
exchange packets with the kernel.
@@ -1561,9 +1561,9 @@
- 66..99.. TThhee sswwiittcchh ddaaeemmoonn
+ 6.9. The switch daemon
- NNoottee: This is the daemon formerly known as uml_router, but which was
+ Note: This is the daemon formerly known as uml_router, but which was
renamed so the network weenies of the world would stop growling at me.
@@ -1649,7 +1649,7 @@
- 66..1100.. SSlliipp
+ 6.10. Slip
Slip is another, less general, mechanism for a process to communicate
with the host networking. In contrast to the ethertap interface,
@@ -1681,7 +1681,7 @@
- 66..1111.. SSlliirrpp
+ 6.11. Slirp
slirp uses an external program, usually /usr/bin/slirp, to provide IP
only networking connectivity through the host. This is similar to IP
@@ -1737,7 +1737,7 @@
- 66..1122.. ppccaapp
+ 6.12. pcap
The pcap transport is attached to a UML ethernet device on the command
line or with uml_mconsole with the following syntax:
@@ -1777,7 +1777,7 @@
- 66..1133.. SSeettttiinngg uupp tthhee hhoosstt yyoouurrsseellff
+ 6.13. Setting up the host yourself
If you don't specify an address for the host side of the ethertap or
slip device, UML won't do any setup on the host. So this is what is
@@ -1785,7 +1785,7 @@
192.168.0.251 and a UML-side IP of 192.168.0.250 - adjust to suit your
own network):
- +o The device needs to be configured with its IP address. Tap devices
+ o The device needs to be configured with its IP address. Tap devices
are also configured with an mtu of 1484. Slip devices are
configured with a point-to-point address pointing at the UML ip
address.
@@ -1805,7 +1805,7 @@
- +o If a tap device is being set up, a route is set to the UML IP.
+ o If a tap device is being set up, a route is set to the UML IP.
UML# route add -host 192.168.0.250 gw 192.168.0.251
@@ -1814,7 +1814,7 @@
- +o To allow other hosts on your network to see the virtual machine,
+ o To allow other hosts on your network to see the virtual machine,
proxy arp is set up for it.
@@ -1824,7 +1824,7 @@
- +o Finally, the host is set up to route packets.
+ o Finally, the host is set up to route packets.
host# echo 1 > /proc/sys/net/ipv4/ip_forward
@@ -1838,12 +1838,12 @@
- 77.. SShhaarriinngg FFiilleessyysstteemmss bbeettwweeeenn VViirrttuuaall MMaacchhiinneess
+ 7. Sharing Filesystems between Virtual Machines
- 77..11.. AA wwaarrnniinngg
+ 7.1. A warning
Don't attempt to share filesystems simply by booting two UMLs from the
same file. That's the same thing as booting two physical machines
@@ -1851,7 +1851,7 @@
- 77..22.. UUssiinngg llaayyeerreedd bblloocckk ddeevviicceess
+ 7.2. Using layered block devices
The way to share a filesystem between two virtual machines is to use
the copy-on-write (COW) layering capability of the ubd block driver.
@@ -1896,7 +1896,7 @@
- 77..33.. NNoottee!!
+ 7.3. Note!
When checking the size of the COW file in order to see the gobs of
space that you're saving, make sure you use 'ls -ls' to see the actual
@@ -1926,7 +1926,7 @@
- 77..44.. AAnnootthheerr wwaarrnniinngg
+ 7.4. Another warning
Once a filesystem is being used as a readonly backing file for a COW
file, do not boot directly from it or modify it in any way. Doing so
@@ -1952,7 +1952,7 @@
- 77..55.. uummll__mmoooo :: MMeerrggiinngg aa CCOOWW ffiillee wwiitthh iittss bbaacckkiinngg ffiillee
+ 7.5. uml_moo : Merging a COW file with its backing file
Depending on how you use UML and COW devices, it may be advisable to
merge the changes in the COW file into the backing file every once in
@@ -2001,7 +2001,7 @@
- 88.. CCrreeaattiinngg ffiilleessyysstteemmss
+ 8. Creating filesystems
You may want to create and mount new UML filesystems, either because
@@ -2015,7 +2015,7 @@
should be easy to translate to the filesystem of your choice.
- 88..11.. CCrreeaattee tthhee ffiilleessyysstteemm ffiillee
+ 8.1. Create the filesystem file
dd is your friend. All you need to do is tell dd to create an empty
file of the appropriate size. I usually make it sparse to save time
@@ -2032,7 +2032,7 @@
- 88..22.. AAssssiiggnn tthhee ffiillee ttoo aa UUMMLL ddeevviiccee
+ 8.2. Assign the file to a UML device
Add an argument like the following to the UML command line:
@@ -2045,7 +2045,7 @@
- 88..33.. CCrreeaattiinngg aanndd mmoouunnttiinngg tthhee ffiilleessyysstteemm
+ 8.3. Creating and mounting the filesystem
Make sure that the filesystem is available, either by being built into
the kernel, or available as a module, then boot up UML and log in. If
@@ -2096,7 +2096,7 @@
- 99.. HHoosstt ffiillee aacccceessss
+ 9. Host file access
If you want to access files on the host machine from inside UML, you
@@ -2112,7 +2112,7 @@
files contained in it just as you would on the host.
- 99..11.. UUssiinngg hhoossttffss
+ 9.1. Using hostfs
To begin with, make sure that hostfs is available inside the virtual
machine with
@@ -2151,7 +2151,7 @@
- 99..22.. hhoossttffss aass tthhee rroooott ffiilleessyysstteemm
+ 9.2. hostfs as the root filesystem
It's possible to boot from a directory hierarchy on the host using
hostfs rather than using the standard filesystem in a file.
@@ -2194,20 +2194,20 @@
UML should then boot as it does normally.
- 99..33.. BBuuiillddiinngg hhoossttffss
+ 9.3. Building hostfs
If you need to build hostfs because it's not in your kernel, you have
two choices:
- +o Compiling hostfs into the kernel:
+ o Compiling hostfs into the kernel:
Reconfigure the kernel and set the 'Host filesystem' option under
- +o Compiling hostfs as a module:
+ o Compiling hostfs as a module:
Reconfigure the kernel and set the 'Host filesystem' option under
@@ -2228,7 +2228,7 @@
- 1100.. TThhee MMaannaaggeemmeenntt CCoonnssoollee
+ 10. The Management Console
@@ -2240,15 +2240,15 @@
There are a number of things you can do with the mconsole interface:
- +o get the kernel version
+ o get the kernel version
- +o add and remove devices
+ o add and remove devices
- +o halt or reboot the machine
+ o halt or reboot the machine
- +o Send SysRq commands
+ o Send SysRq commands
- +o Pause and resume the UML
+ o Pause and resume the UML
You need the mconsole client (uml_mconsole) which is present in CVS
@@ -2300,28 +2300,28 @@
You'll get a prompt, at which you can run one of these commands:
- +o version
+ o version
- +o halt
+ o halt
- +o reboot
+ o reboot
- +o config
+ o config
- +o remove
+ o remove
- +o sysrq
+ o sysrq
- +o help
+ o help
- +o cad
+ o cad
- +o stop
+ o stop
- +o go
+ o go
- 1100..11.. vveerrssiioonn
+ 10.1. version
This takes no arguments. It prints the UML version.
@@ -2342,7 +2342,7 @@
- 1100..22.. hhaalltt aanndd rreebboooott
+ 10.2. halt and reboot
These take no arguments. They shut the machine down immediately, with
no syncing of disks and no clean shutdown of userspace. So, they are
@@ -2357,7 +2357,7 @@
- 1100..33.. ccoonnffiigg
+ 10.3. config
"config" adds a new device to the virtual machine. Currently the ubd
and network drivers support this. It takes one argument, which is the
@@ -2378,7 +2378,7 @@
- 1100..44.. rreemmoovvee
+ 10.4. remove
"remove" deletes a device from the system. Its argument is just the
name of the device to be removed. The device must be idle in whatever
@@ -2397,7 +2397,7 @@
- 1100..55.. ssyyssrrqq
+ 10.5. sysrq
This takes one argument, which is a single letter. It calls the
generic kernel's SysRq driver, which does whatever is called for by
@@ -2407,14 +2407,14 @@
- 1100..66.. hheellpp
+ 10.6. help
"help" returns a string listing the valid commands and what each one
does.
- 1100..77.. ccaadd
+ 10.7. cad
This invokes the Ctl-Alt-Del action on init. What exactly this ends
up doing is up to /etc/inittab. Normally, it reboots the machine.
@@ -2432,7 +2432,7 @@
- 1100..88.. ssttoopp
+ 10.8. stop
This puts the UML in a loop reading mconsole requests until a 'go'
mconsole command is received. This is very useful for making backups
@@ -2448,7 +2448,7 @@
- 1100..99.. ggoo
+ 10.9. go
This resumes a UML after being paused by a 'stop' command. Note that
when the UML has resumed, TCP connections may have timed out and if
@@ -2462,10 +2462,10 @@
- 1111.. KKeerrnneell ddeebbuuggggiinngg
+ 11. Kernel debugging
- NNoottee:: The interface that makes debugging, as described here, possible
+ Note: The interface that makes debugging, as described here, possible
is present in 2.4.0-test6 kernels and later.
@@ -2485,7 +2485,7 @@
- 1111..11.. SSttaarrttiinngg tthhee kkeerrnneell uunnddeerr ggddbb
+ 11.1. Starting the kernel under gdb
You can have the kernel running under the control of gdb from the
beginning by putting 'debug' on the command line. You will get an
@@ -2498,7 +2498,7 @@
There is a transcript of a debugging session here <debug-
session.html> , with breakpoints being set in the scheduler and in an
interrupt handler.
- 1111..22.. EExxaammiinniinngg sslleeeeppiinngg pprroocceesssseess
+ 11.2. Examining sleeping processes
Not every bug is evident in the currently running process. Sometimes,
processes hang in the kernel when they shouldn't because they've
@@ -2516,7 +2516,7 @@
Now what you do is this:
- +o detach from the current thread
+ o detach from the current thread
(UML gdb) det
@@ -2525,7 +2525,7 @@
- +o attach to the thread you are interested in
+ o attach to the thread you are interested in
(UML gdb) att <host pid>
@@ -2534,7 +2534,7 @@
- +o look at its stack and anything else of interest
+ o look at its stack and anything else of interest
(UML gdb) bt
@@ -2545,7 +2545,7 @@
Note that you can't do anything at this point that requires that a
process execute, e.g. calling a function
- +o when you're done looking at that process, reattach to the current
+ o when you're done looking at that process, reattach to the current
thread and continue it
@@ -2569,12 +2569,12 @@
- 1111..33.. RRuunnnniinngg dddddd oonn UUMMLL
+ 11.3. Running ddd on UML
ddd works on UML, but requires a special kludge. The process goes
like this:
- +o Start ddd
+ o Start ddd
host% ddd linux
@@ -2583,14 +2583,14 @@
- +o With ps, get the pid of the gdb that ddd started. You can ask the
+ o With ps, get the pid of the gdb that ddd started. You can ask the
gdb to tell you, but for some reason that confuses things and
causes a hang.
- +o run UML with 'debug=parent gdb-pid=<pid>' added to the command line
+ o run UML with 'debug=parent gdb-pid=<pid>' added to the command line
- it will just sit there after you hit return
- +o type 'att 1' to the ddd gdb and you will see something like
+ o type 'att 1' to the ddd gdb and you will see something like
0xa013dc51 in __kill ()
@@ -2602,12 +2602,12 @@
- +o At this point, type 'c', UML will boot up, and you can use ddd just
+ o At this point, type 'c', UML will boot up, and you can use ddd just
as you do on any other process.
- 1111..44.. DDeebbuuggggiinngg mmoodduulleess
+ 11.4. Debugging modules
gdb has support for debugging code which is dynamically loaded into
the process. This support is what is needed to debug kernel modules
@@ -2823,7 +2823,7 @@
- 1111..55.. AAttttaacchhiinngg ggddbb ttoo tthhee kkeerrnneell
+ 11.5. Attaching gdb to the kernel
If you don't have the kernel running under gdb, you can attach gdb to
it later by sending the tracing thread a SIGUSR1. The first line of
@@ -2857,7 +2857,7 @@
- 1111..66.. UUssiinngg aalltteerrnnaattee ddeebbuuggggeerrss
+ 11.6. Using alternate debuggers
UML has support for attaching to an already running debugger rather
than starting gdb itself. This is present in CVS as of 17 Apr 2001.
@@ -2886,7 +2886,7 @@
An example of an alternate debugger is strace. You can strace the
actual kernel as follows:
- +o Run the following in a shell
+ o Run the following in a shell
host%
@@ -2894,10 +2894,10 @@
- +o Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out
+ o Run UML with 'debug' and 'gdb-pid=<pid>' with the pid printed out
by the previous command
- +o Hit return in the shell, and UML will start running, and strace
+ o Hit return in the shell, and UML will start running, and strace
output will start accumulating in the output file.
Note that this is different from running
@@ -2917,9 +2917,9 @@
- 1122.. KKeerrnneell ddeebbuuggggiinngg eexxaammpplleess
+ 12. Kernel debugging examples
- 1122..11.. TThhee ccaassee ooff tthhee hhuunngg ffsscckk
+ 12.1. The case of the hung fsck
When booting up the kernel, fsck failed, and dropped me into a shell
to fix things up. I ran fsck -y, which hung:
@@ -3154,9 +3154,9 @@
The interesting things here are :
- +o There are two segfaults on this stack (frames 9 and 14)
+ o There are two segfaults on this stack (frames 9 and 14)
- +o The first faulting address (frame 11) is 0x50000800
+ o The first faulting address (frame 11) is 0x50000800
(gdb) p (void *)1342179328
$16 = (void *) 0x50000800
@@ -3399,7 +3399,7 @@
on will be somewhat clearer.
- 1122..22.. EEppiissooddee 22:: TThhee ccaassee ooff tthhee hhuunngg ffsscckk
+ 12.2. Episode 2: The case of the hung fsck
After setting a trap in the SEGV handler for accesses to the signal
thread's stack, I reran the kernel.
@@ -3788,12 +3788,12 @@
- 1133.. WWhhaatt ttoo ddoo wwhheenn UUMMLL ddooeessnn''tt wwoorrkk
+ 13. What to do when UML doesn't work
- 1133..11.. SSttrraannggee ccoommppiillaattiioonn eerrrroorrss wwhheenn yyoouu bbuuiilldd ffrroomm ssoouurrccee
+ 13.1. Strange compilation errors when you build from source
As of test11, it is necessary to have "ARCH=um" in the environment or
on the make command line for all steps in building UML, including
@@ -3824,8 +3824,8 @@
- 1133..33.. AA vvaarriieettyy ooff ppaanniiccss aanndd hhaannggss wwiitthh //ttmmpp oonn aa rreeiisseerrffss ffiilleessyyss--
- tteemm
+ 13.3. A variety of panics and hangs with /tmp on a reiserfs filesys-
+ tem
I saw this on reiserfs 3.5.21 and it seems to be fixed in 3.5.27.
Panics preceded by
@@ -3842,8 +3842,8 @@
- 1133..44.. TThhee ccoommppiillee ffaaiillss wwiitthh eerrrroorrss aabboouutt ccoonnfflliiccttiinngg ttyyppeess ffoorr
- ''ooppeenn'',, ''dduupp'',, aanndd ''wwaaiittppiidd''
+ 13.4. The compile fails with errors about conflicting types for
+ 'open', 'dup', and 'waitpid'
This happens when you build in /usr/src/linux. The UML build makes
the include/asm link point to include/asm-um. /usr/include/asm points
@@ -3854,14 +3854,14 @@
- 1133..55.. UUMMLL ddooeessnn''tt wwoorrkk wwhheenn //ttmmpp iiss aann NNFFSS ffiilleessyysstteemm
+ 13.5. UML doesn't work when /tmp is an NFS filesystem
This seems to be a similar situation with the ReiserFS problem above.
Some versions of NFS seems not to handle mmap correctly, which UML
depends on. The workaround is have /tmp be a non-NFS directory.
- 1133..66.. UUMMLL hhaannggss oonn bboooott wwhheenn ccoommppiilleedd wwiitthh ggpprrooff ssuuppppoorrtt
+ 13.6. UML hangs on boot when compiled with gprof support
If you build UML with gprof support and, early in the boot, it does
this
@@ -3878,7 +3878,7 @@
- 1133..77.. ssyyssllooggdd ddiieess wwiitthh aa SSIIGGTTEERRMM oonn ssttaarrttuupp
+ 13.7. syslogd dies with a SIGTERM on startup
The exact boot error depends on the distribution that you're booting,
but Debian produces this:
@@ -3897,17 +3897,17 @@
- 1133..88.. TTUUNN//TTAAPP nneettwwoorrkkiinngg ddooeessnn''tt wwoorrkk oonn aa 22..44 hhoosstt
+ 13.8. TUN/TAP networking doesn't work on a 2.4 host
There are a couple of problems which were
<http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="pointed
out"> by Tim Robinson <timro at trkr dot net>
- +o It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier.
+ o It doesn't work on hosts running 2.4.7 (or thereabouts) or earlier.
The fix is to upgrade to something more recent and then read the
next item.
- +o If you see
+ o If you see
File descriptor in bad state
@@ -3921,8 +3921,8 @@
- 1133..99.. YYoouu ccaann nneettwwoorrkk ttoo tthhee hhoosstt bbuutt nnoott ttoo ootthheerr mmaacchhiinneess oonn tthhee
- nneett
+ 13.9. You can network to the host but not to other machines on the
+ net
If you can connect to the host, and the host can connect to UML, but
you cannot connect to any other machines, then you may need to enable
@@ -3972,7 +3972,7 @@
- 1133..1100.. II hhaavvee nnoo rroooott aanndd II wwaanntt ttoo ssccrreeaamm
+ 13.10. I have no root and I want to scream
Thanks to Birgit Wahlich for telling me about this strange one. It
turns out that there's a limit of six environment variables on the
@@ -3987,7 +3987,7 @@
- 1133..1111.. UUMMLL bbuuiilldd ccoonnfflliicctt bbeettwweeeenn ppttrraaccee..hh aanndd uuccoonntteexxtt..hh
+ 13.11. UML build conflict between ptrace.h and ucontext.h
On some older systems, /usr/include/asm/ptrace.h and
/usr/include/sys/ucontext.h define the same names. So, when they're
@@ -4007,7 +4007,7 @@
- 1133..1122.. TThhee UUMMLL BBooggooMMiippss iiss eexxaaccttllyy hhaallff tthhee hhoosstt''ss BBooggooMMiippss
+ 13.12. The UML BogoMips is exactly half the host's BogoMips
On i386 kernels, there are two ways of running the loop that is used
to calculate the BogoMips rating, using the TSC if it's there or using
@@ -4019,7 +4019,7 @@
- 1133..1133.. WWhheenn yyoouu rruunn UUMMLL,, iitt iimmmmeeddiiaatteellyy sseeggffaauullttss
+ 13.13. When you run UML, it immediately segfaults
If the host is configured with the 2G/2G address space split, that's
why. See ``UML on 2G/2G hosts'' for the details on getting UML to
@@ -4027,7 +4027,7 @@
- 1133..1144.. xxtteerrmmss aappppeeaarr,, tthheenn iimmmmeeddiiaatteellyy ddiissaappppeeaarr
+ 13.14. xterms appear, then immediately disappear
If you're running an up to date kernel with an old release of
uml_utilities, the port-helper program will not work properly, so
@@ -4039,7 +4039,7 @@
- 1133..1155.. AAnnyy ootthheerr ppaanniicc,, hhaanngg,, oorr ssttrraannggee bbeehhaavviioorr
+ 13.15. Any other panic, hang, or strange behavior
If you're seeing truly strange behavior, such as hangs or panics that
happen in random places, or you try running the debugger to see what's
@@ -4059,7 +4059,7 @@
If you want to be super-helpful, read ``Diagnosing Problems'' and
follow the instructions contained therein.
- 1144.. DDiiaaggnnoossiinngg PPrroobblleemmss
+ 14. Diagnosing Problems
If you get UML to crash, hang, or otherwise misbehave, you should
@@ -4078,7 +4078,7 @@
``Kernel debugging'' UML first.
- 1144..11.. CCaassee 11 :: NNoorrmmaall kkeerrnneell ppaanniiccss
+ 14.1. Case 1 : Normal kernel panics
The most common case is for a normal thread to panic. To debug this,
you will need to run it under the debugger (add 'debug' to the command
@@ -4128,7 +4128,7 @@
to get that information from the faulting ip.
- 1144..22.. CCaassee 22 :: TTrraacciinngg tthhrreeaadd ppaanniiccss
+ 14.2. Case 2 : Tracing thread panics
The less common and more painful case is when the tracing thread
panics. In this case, the kernel debugger will be useless because it
@@ -4161,7 +4161,7 @@
backtrace in and wait for our crack debugging team to fix the problem.
- 1144..33.. CCaassee 33 :: TTrraacciinngg tthhrreeaadd ppaanniiccss ccaauusseedd bbyy ootthheerr tthhrreeaaddss
+ 14.3. Case 3 : Tracing thread panics caused by other threads
However, there are cases where the misbehavior of another thread
caused the problem. The most common panic of this type is:
@@ -4227,7 +4227,7 @@
- 1144..44.. CCaassee 44 :: HHaannggss
+ 14.4. Case 4 : Hangs
Hangs seem to be fairly rare, but they sometimes happen. When a hang
happens, we need a backtrace from the offending process. Run the
@@ -4257,7 +4257,7 @@
- 1155.. TThhaannkkss
+ 15. Thanks
A number of people have helped this project in various ways, and this
@@ -4274,20 +4274,20 @@
bookkeeping lapses and I forget about contributions.
- 1155..11.. CCooddee aanndd DDooccuummeennttaattiioonn
+ 15.1. Code and Documentation
Rusty Russell <rusty at linuxcare.com.au> -
- +o wrote the HOWTO <http://user-mode-
+ o wrote the HOWTO <http://user-mode-
linux.sourceforge.net/UserModeLinux-HOWTO.html>
- +o prodded me into making this project official and putting it on
+ o prodded me into making this project official and putting it on
SourceForge
- +o came up with the way cool UML logo <http://user-mode-
+ o came up with the way cool UML logo <http://user-mode-
linux.sourceforge.net/uml-small.png>
- +o redid the config process
+ o redid the config process
Peter Moulder <reiter at netspace.net.au> - Fixed my config and build
@@ -4296,18 +4296,18 @@
Bill Stearns <wstearns at pobox.com> -
- +o HOWTO updates
+ o HOWTO updates
- +o lots of bug reports
+ o lots of bug reports
- +o lots of testing
+ o lots of testing
- +o dedicated a box (uml.ists.dartmouth.edu) to support UML development
+ o dedicated a box (uml.ists.dartmouth.edu) to support UML development
- +o wrote the mkrootfs script, which allows bootable filesystems of
+ o wrote the mkrootfs script, which allows bootable filesystems of
RPM-based distributions to be cranked out
- +o cranked out a large number of filesystems with said script
+ o cranked out a large number of filesystems with said script
Jim Leu <jleu at mindspring.com> - Wrote the virtual ethernet driver
@@ -4375,176 +4375,176 @@
David Coulson <http://davidcoulson.net> -
- +o Set up the usermodelinux.org <http://usermodelinux.org> site,
+ o Set up the usermodelinux.org <http://usermodelinux.org> site,
which is a great way of keeping the UML user community on top of
UML goings-on.
- +o Site documentation and updates
+ o Site documentation and updates
- +o Nifty little UML management daemon UMLd
+ o Nifty little UML management daemon UMLd
<http://uml.openconsultancy.com/umld/>
- +o Lots of testing and bug reports
+ o Lots of testing and bug reports
- 1155..22.. FFlluusshhiinngg oouutt bbuuggss
+ 15.2. Flushing out bugs
- +o Yuri Pudgorodsky
+ o Yuri Pudgorodsky
- +o Gerald Britton
+ o Gerald Britton
- +o Ian Wehrman
+ o Ian Wehrman
- +o Gord Lamb
+ o Gord Lamb
- +o Eugene Koontz
+ o Eugene Koontz
- +o John H. Hartman
+ o John H. Hartman
- +o Anders Karlsson
+ o Anders Karlsson
- +o Daniel Phillips
+ o Daniel Phillips
- +o John Fremlin
+ o John Fremlin
- +o Rainer Burgstaller
+ o Rainer Burgstaller
- +o James Stevenson
+ o James Stevenson
- +o Matt Clay
+ o Matt Clay
- +o Cliff Jefferies
+ o Cliff Jefferies
- +o Geoff Hoff
+ o Geoff Hoff
- +o Lennert Buytenhek
+ o Lennert Buytenhek
- +o Al Viro
+ o Al Viro
- +o Frank Klingenhoefer
+ o Frank Klingenhoefer
- +o Livio Baldini Soares
+ o Livio Baldini Soares
- +o Jon Burgess
+ o Jon Burgess
- +o Petru Paler
+ o Petru Paler
- +o Paul
+ o Paul
- +o Chris Reahard
+ o Chris Reahard
- +o Sverker Nilsson
+ o Sverker Nilsson
- +o Gong Su
+ o Gong Su
- +o johan verrept
+ o johan verrept
- +o Bjorn Eriksson
+ o Bjorn Eriksson
- +o Lorenzo Allegrucci
+ o Lorenzo Allegrucci
- +o Muli Ben-Yehuda
+ o Muli Ben-Yehuda
- +o David Mansfield
+ o David Mansfield
- +o Howard Goff
+ o Howard Goff
- +o Mike Anderson
+ o Mike Anderson
- +o John Byrne
+ o John Byrne
- +o Sapan J. Batia
+ o Sapan J. Batia
- +o Iris Huang
+ o Iris Huang
- +o Jan Hudec
+ o Jan Hudec
- +o Voluspa
+ o Voluspa
- 1155..33.. BBuugglleettss aanndd cclleeaann--uuppss
+ 15.3. Buglets and clean-ups
- +o Dave Zarzycki
+ o Dave Zarzycki
- +o Adam Lazur
+ o Adam Lazur
- +o Boria Feigin
+ o Boria Feigin
- +o Brian J. Murrell
+ o Brian J. Murrell
- +o JS
+ o JS
- +o Roman Zippel
+ o Roman Zippel
- +o Wil Cooley
+ o Wil Cooley
- +o Ayelet Shemesh
+ o Ayelet Shemesh
- +o Will Dyson
+ o Will Dyson
- +o Sverker Nilsson
+ o Sverker Nilsson
- +o dvorak
+ o dvorak
- +o v.naga srinivas
+ o v.naga srinivas
- +o Shlomi Fish
+ o Shlomi Fish
- +o Roger Binns
+ o Roger Binns
- +o johan verrept
+ o johan verrept
- +o MrChuoi
+ o MrChuoi
- +o Peter Cleve
+ o Peter Cleve
- +o Vincent Guffens
+ o Vincent Guffens
- +o Nathan Scott
+ o Nathan Scott
- +o Patrick Caulfield
+ o Patrick Caulfield
- +o jbearce
+ o jbearce
- +o Catalin Marinas
+ o Catalin Marinas
- +o Shane Spencer
+ o Shane Spencer
- +o Zou Min
+ o Zou Min
- +o Ryan Boder
+ o Ryan Boder
- +o Lorenzo Colitti
+ o Lorenzo Colitti
- +o Gwendal Grignou
+ o Gwendal Grignou
- +o Andre' Breiler
+ o Andre' Breiler
- +o Tsutomu Yasuda
+ o Tsutomu Yasuda
- 1155..44.. CCaassee SSttuuddiieess
+ 15.4. Case Studies
- +o Jon Wright
+ o Jon Wright
- +o William McEwan
+ o William McEwan
- +o Michael Richardson
+ o Michael Richardson
- 1155..55.. OOtthheerr ccoonnttrriibbuuttiioonnss
+ 15.5. Other contributions
Bill Carr <Bill.Carr at compaq.com> made the Red Hat mkrootfs script
diff --git a/MAINTAINERS b/MAINTAINERS
index 5d6941f..a6afe34 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -692,6 +692,12 @@
F: drivers/mtd/nand/bcm_umi_bch.c
F: drivers/mtd/nand/nand_bcm_umi.h
+ARM/CALXEDA HIGHBANK ARCHITECTURE
+M: Rob Herring <rob.herring@calxeda.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-highbank/
+
ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
M: Anton Vorontsov <avorontsov@mvista.com>
S: Maintained
@@ -791,6 +797,13 @@
S: Maintained
F: arch/arm/mach-mx5/
+ARM/FREESCALE IMX6
+M: Shawn Guo <shawn.guo@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+T: git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F: arch/arm/mach-imx/*imx6*
+
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1703,6 +1716,7 @@
F: include/linux/can/core.h
F: include/linux/can/bcm.h
F: include/linux/can/raw.h
+F: include/linux/can/gw.h
CAN NETWORK DRIVERS
M: Wolfgang Grandegger <wg@grandegger.com>
@@ -2454,8 +2468,6 @@
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i7core_edac.c
-F: drivers/edac/edac_mce.c
-F: include/linux/edac_mce.h
EDAC-I82975X
M: Ranganathan Desikan <ravi@jetztechnologies.com>
@@ -2479,6 +2491,13 @@
S: Maintained
F: drivers/edac/r82600_edac.c
+EDAC-SBRIDGE
+M: Mauro Carvalho Chehab <mchehab@redhat.com>
+L: linux-edac@vger.kernel.org
+W: bluesmoke.sourceforge.net
+S: Maintained
+F: drivers/edac/sb_edac.c
+
EDIROL UA-101/UA-1000 DRIVER
M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@@ -3000,6 +3019,13 @@
F: drivers/char/hw_random/
F: include/linux/hw_random.h
+HARDWARE SPINLOCK CORE
+M: Ohad Ben-Cohen <ohad@wizery.com>
+S: Maintained
+F: Documentation/hwspinlock.txt
+F: drivers/hwspinlock/hwspinlock_*
+F: include/linux/hwspinlock.h
+
HARMONY SOUND DRIVER
M: Kyle McMartin <kyle@mcmartin.ca>
L: linux-parisc@vger.kernel.org
@@ -3192,8 +3218,7 @@
M: Tony Luck <tony.luck@intel.com>
M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-ia64@vger.kernel.org
-W: http://www.ia64-linux.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
S: Maintained
F: arch/ia64/
@@ -4452,11 +4477,9 @@
F: drivers/net/ethernet/neterion/
NETFILTER/IPTABLES/IPCHAINS
-P: Rusty Russell
-P: Marc Boucher
-P: James Morris
P: Harald Welte
P: Jozsef Kadlecsik
+M: Pablo Neira Ayuso <pablo@netfilter.org>
M: Patrick McHardy <kaber@trash.net>
L: netfilter-devel@vger.kernel.org
L: netfilter@vger.kernel.org
@@ -4697,6 +4720,13 @@
F: drivers/video/omap2/
F: Documentation/arm/OMAP/DSS
+OMAP HARDWARE SPINLOCK SUPPORT
+M: Ohad Ben-Cohen <ohad@wizery.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/hwspinlock/omap_hwspinlock.c
+F: arch/arm/mach-omap2/hwspinlock.c
+
OMAP MMC SUPPORT
M: Jarkko Lavinen <jarkko.lavinen@nokia.com>
L: linux-omap@vger.kernel.org
@@ -6670,7 +6700,6 @@
UDF FILESYSTEM
M: Jan Kara <jack@suse.cz>
-W: http://linux-udf.sourceforge.net
S: Maintained
F: Documentation/filesystems/udf.txt
F: fs/udf/
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5ca86e7..fe6b052 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -334,6 +334,20 @@
help
Support for Broadcom's BCMRing platform.
+config ARCH_HIGHBANK
+ bool "Calxeda Highbank-based"
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select USE_OF
+ help
+ Support for the Calxeda Highbank SoC based boards.
+
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
@@ -394,7 +408,7 @@
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET
- select NEED_MEMORY_H
+ select NEED_MACH_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -417,6 +431,7 @@
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select HAVE_SCHED_CLOCK
+ select MULTI_IRQ_HANDLER
help
Support for Freescale MXC/iMX-based family of processors
@@ -609,14 +624,6 @@
<http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
-config ARCH_NUC93X
- bool "Nuvoton NUC93X CPU"
- select CPU_ARM926T
- select CLKDEV_LOOKUP
- help
- Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
- low-power and high performance MPEG-4/JPEG multimedia controller chip.
-
config ARCH_TEGRA
bool "NVIDIA Tegra"
select CLKDEV_LOOKUP
@@ -630,6 +637,24 @@
This enables support for NVIDIA Tegra based systems (Tegra APX,
Tegra 6xx and Tegra 2 series).
+config ARCH_PICOXCELL
+ bool "Picochip picoXcell"
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select ARM_VIC
+ select CPU_V6K
+ select DW_APB_TIMER
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select HAVE_SCHED_CLOCK
+ select HAVE_TCM
+ select NO_IOPORT
+ select USE_OF
+ help
+ This enables support for systems based on the Picochip picoXcell
+ family of Femtocell devices. The picoxcell support requires device tree
+ for all boards.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
@@ -861,6 +886,7 @@
select HAVE_SCHED_CLOCK
select HAVE_TCM
select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
@@ -1011,8 +1037,6 @@
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"
-source "arch/arm/mach-nuc93x/Kconfig"
-
source "arch/arm/plat-omap/Kconfig"
source "arch/arm/mach-omap1/Kconfig"
@@ -1406,7 +1430,7 @@
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
- ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
+ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK || SOC_IMX6Q
depends on MMU
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
@@ -2044,6 +2068,7 @@
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
+ select CPU_FREQ_TABLE
select CPU_FREQ_DEFAULT_GOV_USERSPACE
config CPU_FREQ_S3C
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f283938..c5213e7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -128,6 +128,125 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_HIGHBANK_UART
+ bool "Kernel low-level debugging messages via Highbank UART"
+ depends on ARCH_HIGHBANK
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the UART on Highbank based devices.
+
+ config DEBUG_IMX1_UART
+ bool "i.MX1 Debug UART"
+ depends on SOC_IMX1
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX1.
+
+ config DEBUG_IMX23_UART
+ bool "i.MX23 Debug UART"
+ depends on SOC_IMX23
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX23.
+
+ config DEBUG_IMX25_UART
+ bool "i.MX25 Debug UART"
+ depends on SOC_IMX25
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX25.
+
+ config DEBUG_IMX21_IMX27_UART
+ bool "i.MX21 and i.MX27 Debug UART"
+ depends on SOC_IMX21 || SOC_IMX27
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX21 or i.MX27.
+
+ config DEBUG_IMX28_UART
+ bool "i.MX28 Debug UART"
+ depends on SOC_IMX28
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX28.
+
+ config DEBUG_IMX31_IMX35_UART
+ bool "i.MX31 and i.MX35 Debug UART"
+ depends on SOC_IMX31 || SOC_IMX35
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX31 or i.MX35.
+
+ config DEBUG_IMX51_UART
+ bool "i.MX51 Debug UART"
+ depends on SOC_IMX51
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX51.
+
+ config DEBUG_IMX50_IMX53_UART
+ bool "i.MX50 and i.MX53 Debug UART"
+ depends on SOC_IMX50 || SOC_IMX53
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX50 or i.MX53.
+
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q Debug UART"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
endchoice
config EARLY_PRINTK
@@ -146,18 +265,6 @@
buffer driver that will allow you to collect traces of the
kernel code.
-config DEBUG_S3C_UART
- depends on PLAT_SAMSUNG
- int "S3C UART to use for low-level debug"
- default "0"
- help
- Choice for UART for kernel low-level using S3C UARTS,
- should be between zero and two. The port must have been
- initialised by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
config ARM_KPROBES_TEST
tristate "Kprobes test module"
depends on KPROBES && MODULES
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 5665c2a..b7c2d37 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -144,6 +144,7 @@
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
machine-$(CONFIG_ARCH_H720X) := h720x
+machine-$(CONFIG_ARCH_HIGHBANK) := highbank
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
@@ -157,10 +158,8 @@
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
-machine-$(CONFIG_ARCH_MX1) := imx
-machine-$(CONFIG_ARCH_MX2) := imx
-machine-$(CONFIG_ARCH_MX25) := imx
-machine-$(CONFIG_ARCH_MX3) := imx
+machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
+machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
@@ -170,6 +169,7 @@
machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
@@ -192,7 +192,6 @@
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
-machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
new file mode 100644
index 0000000..aeef042
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -0,0 +1,119 @@
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G20 family SoC";
+ compatible = "atmel,at91sam9g20";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &usart4;
+ serial6 = &usart5;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fffd0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd0000 0x200>;
+ interrupts = <23>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart4: serial@fffd4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd4000 0x200>;
+ interrupts = <24>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart5: serial@fffd8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd8000 0x200>;
+ interrupts = <25>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
new file mode 100644
index 0000000..db6a452
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -0,0 +1,106 @@
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ * applies to AT91SAM9G45, AT91SAM9M10,
+ * AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G45 family SoC";
+ compatible = "atmel,at91sam9g45";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x10000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dma: dma-controller@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+ };
+
+ dbgu: serial@ffffee00 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xffffee00 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fff90000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff90000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fff94000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff94000 0x200>;
+ interrupts = <9>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fff98000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff98000 0x200>;
+ interrupts = <10>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
new file mode 100644
index 0000000..85b34f5
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -0,0 +1,35 @@
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g45.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9M10G45-EK";
+ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+ };
+
+ memory@70000000 {
+ reg = <0x70000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ usart1: serial@fff90000 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
new file mode 100644
index 0000000..aeb1a75
--- /dev/null
+++ b/arch/arm/boot/dts/highbank.dts
@@ -0,0 +1,198 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+ model = "Calxeda Highbank";
+ compatible = "calxeda,highbank";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x00000000 0xff900000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyAMA0";
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer@fff10600 {
+ compatible = "arm,smp-twd";
+ reg = <0xfff10600 0x20>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ watchdog@fff10620 {
+ compatible = "arm,cortex-a9-wdt";
+ reg = <0xfff10620 0x20>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ intc: interrupt-controller@fff11000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #size-cells = <0>;
+ #address-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfff11000 0x1000>,
+ <0xfff10100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xfff12000 0x1000>;
+ interrupts = <0 70 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>;
+ };
+
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x10000>;
+ interrupts = <0 83 4>;
+ };
+
+ sdhci@ffe0e000 {
+ compatible = "calxeda,hb-sdhci";
+ reg = <0xffe0e000 0x1000>;
+ interrupts = <0 90 4>;
+ };
+
+ ipc@fff20000 {
+ compatible = "arm,pl320", "arm,primecell";
+ reg = <0xfff20000 0x1000>;
+ interrupts = <0 7 4>;
+ };
+
+ gpioe: gpio@fff30000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff30000 0x1000>;
+ interrupts = <0 14 4>;
+ };
+
+ gpiof: gpio@fff31000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff31000 0x1000>;
+ interrupts = <0 15 4>;
+ };
+
+ gpiog: gpio@fff32000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff32000 0x1000>;
+ interrupts = <0 16 4>;
+ };
+
+ gpioh: gpio@fff33000 {
+ #gpio-cells = <2>;
+ compatible = "arm,pl061", "arm,primecell";
+ gpio-controller;
+ reg = <0xfff33000 0x1000>;
+ interrupts = <0 17 4>;
+ };
+
+ timer {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfff34000 0x1000>;
+ interrupts = <0 18 4>;
+ };
+
+ rtc@fff35000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0xfff35000 0x1000>;
+ interrupts = <0 19 4>;
+ };
+
+ serial@fff36000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfff36000 0x1000>;
+ interrupts = <0 20 4>;
+ };
+
+ smic@fff3a000 {
+ compatible = "ipmi-smic";
+ device_type = "ipmi";
+ reg = <0xfff3a000 0x1000>;
+ interrupts = <0 24 4>;
+ reg-size = <4>;
+ reg-spacing = <4>;
+ };
+
+ sregs@fff3c000 {
+ compatible = "calxeda,hb-sregs";
+ reg = <0xfff3c000 0x1000>;
+ };
+
+ dma@fff3d000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xfff3d000 0x1000>;
+ interrupts = <0 92 4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
new file mode 100644
index 0000000..f8766af
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx51.dtsi"
+
+/ {
+ model = "Freescale i.MX51 Babbage Board";
+ compatible = "fsl,imx51-babbage", "fsl,imx51";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x90000000 0x20000000>;
+ };
+
+ soc {
+ aips@70000000 { /* aips-1 */
+ spba@70000000 {
+ esdhc@70004000 { /* ESDHC1 */
+ fsl,cd-internal;
+ fsl,wp-internal;
+ status = "okay";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
+ wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ status = "okay";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
+ <&gpio3 25 0>; /* GPIO4_25 */
+ status = "okay";
+
+ pmic: mc13892@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mc13892";
+ spi-max-frequency = <6000000>;
+ reg = <0>;
+ mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ fsl,mc13xxx-uses-regulator;
+ };
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc-babbage";
+ reg = <0x73fa8000 0x4000>;
+ };
+
+ uart0: uart@73fbc000 {
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ uart1: uart@73fc0000 {
+ status = "okay";
+ };
+ };
+
+ aips@80000000 { /* aips-2 */
+ sdma@83fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@83fec000 {
+ phy-mode = "mii";
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio1 21 0>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
new file mode 100644
index 0000000..327ab8e
--- /dev/null
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ tzic: tz-interrupt-controller@e0000000 {
+ compatible = "fsl,imx51-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xe0000000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@70000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x10000000>;
+ ranges;
+
+ spba@70000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x70000000 0x40000>;
+ ranges;
+
+ esdhc@70004000 { /* ESDHC1 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@70008000 { /* ESDHC2 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@7000c000 { /* UART3 */
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x7000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@70010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x70010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@70020000 { /* ESDHC3 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@70024000 { /* ESDHC4 */
+ compatible = "fsl,imx51-esdhc";
+ reg = <0x70024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@73f84000 { /* GPIO1 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@73f88000 { /* GPIO2 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@73f8c000 { /* GPIO3 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@73f90000 { /* GPIO4 */
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@73f98000 { /* WDOG1 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@73f9c000 { /* WDOG2 */
+ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
+ reg = <0x73f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@73fbc000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@73fc0000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+ };
+
+ aips@80000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x10000000>;
+ ranges;
+
+ ecspi@83fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-ecspi";
+ reg = <0x83fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@83fb0000 {
+ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+ reg = <0x83fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@83fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
+ reg = <0x83fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@83fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@83fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ reg = <0x83fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@83fec000 {
+ compatible = "fsl,imx51-fec", "fsl,imx27-fec";
+ reg = <0x83fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
new file mode 100644
index 0000000..2ab7f80
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Automotive Reference Design Board";
+ compatible = "fsl,imx53-ard", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
+ wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-ard";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+ };
+ };
+
+ eim-cs1@f4000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eim-bus", "simple-bus";
+ reg = <0xf4000000 0x3ff0000>;
+ ranges;
+
+ lan9220@f4000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0xf4000000 0x2000000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio1>;
+ interrupts = <31>;
+ reg-io-width = <4>;
+ smsc,irq-push-pull;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ home {
+ label = "Home";
+ gpios = <&gpio4 10 0>; /* GPIO5_10 */
+ linux,code = <102>; /* KEY_HOME */
+ gpio-key,wakeup;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio4 11 0>; /* GPIO5_11 */
+ linux,code = <158>; /* KEY_BACK */
+ gpio-key,wakeup;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio4 12 0>; /* GPIO5_12 */
+ linux,code = <362>; /* KEY_PROGRAM */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio4 13 0>; /* GPIO5_13 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio3 0 0>; /* GPIO4_0 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
new file mode 100644
index 0000000..3f3a881
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Evaluation Kit";
+ compatible = "fsl,imx53-evk", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x80000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ flash: at45db321d@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-evk";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ pmic: mc13892@08 {
+ compatible = "fsl,mc13892", "fsl,mc13xxx";
+ reg = <0x08>;
+ };
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
new file mode 100644
index 0000000..ae6de6d
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start Board";
+ compatible = "fsl,imx53-qsb", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ status = "okay";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
+ wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-qsb";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio0 8 0>; /* GPIO1_8 */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio6 7 0>; /* GPIO7_7 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
new file mode 100644
index 0000000..b1c062e
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx53.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Smart Mobile Reference Design Board";
+ compatible = "fsl,imx53-smd", "fsl,imx53";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
+ };
+
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ soc {
+ aips@50000000 { /* AIPS1 */
+ spba@50000000 {
+ esdhc@50004000 { /* ESDHC1 */
+ cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
+ wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
+ status = "okay";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
+ <&gpio2 19 0>; /* GPIO3_19 */
+ status = "okay";
+
+ zigbee: mc1323@0 {
+ compatible = "fsl,mc1323";
+ spi-max-frequency = <8000000>;
+ reg = <0>;
+ };
+
+ flash: m25p32@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32", "st,m25p";
+ spi-max-frequency = <20000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0x3c0000>;
+ };
+ };
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ fsl,card-wired;
+ status = "okay";
+ };
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ status = "okay";
+ };
+
+ iomuxc@53fa8000 {
+ compatible = "fsl,imx53-iomuxc-smd";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ status = "okay";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ status = "okay";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ sdma@63fb0000 {
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ status = "okay";
+
+ codec: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ };
+
+ magnetometer: mag3110@0e {
+ compatible = "fsl,mag3110";
+ reg = <0x0e>;
+ };
+
+ touchkey: mpr121@5a {
+ compatible = "fsl,mpr121";
+ reg = <0x5a>;
+ };
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+
+ camera: ov5642@3c {
+ compatible = "ovti,ov5642";
+ reg = <0x3c>;
+ };
+
+ pmic: dialog@48 {
+ compatible = "dialog,da9053", "dialog,da9052";
+ reg = <0x48>;
+ };
+ };
+
+ fec@63fec000 {
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 14 0>; /* GPIO2_14 */
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 15 0>; /* GPIO2_15 */
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
new file mode 100644
index 0000000..099cd84
--- /dev/null
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -0,0 +1,301 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc@50004000 { /* ESDHC1 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ esdhc@50008000 { /* ESDHC2 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ uart2: uart@5000c000 { /* UART3 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ ecspi@50010000 { /* ECSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ status = "disabled";
+ };
+
+ esdhc@50020000 { /* ESDHC3 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ esdhc@50024000 { /* ESDHC4 */
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ status = "disabled";
+ };
+ };
+
+ gpio0: gpio@53f84000 { /* GPIO1 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@53f88000 { /* GPIO2 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@53f8c000 { /* GPIO3 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@53f90000 { /* GPIO4 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ wdog@53f98000 { /* WDOG1 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ status = "disabled";
+ };
+
+ wdog@53f9c000 { /* WDOG2 */
+ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <59>;
+ status = "disabled";
+ };
+
+ uart0: uart@53fbc000 { /* UART1 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
+ uart1: uart@53fc0000 { /* UART2 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ gpio4: gpio@53fdc000 { /* GPIO5 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@53fe0000 { /* GPIO6 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@53fe4000 { /* GPIO7 */
+ compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
+ reg = <0x53fe4000 0x4000>;
+ interrupts = <107 108>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ i2c@53fec000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ status = "disabled";
+ };
+
+ uart3: uart@53ff0000 { /* UART4 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart4: uart@63f90000 { /* UART5 */
+ compatible = "fsl,imx53-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ status = "disabled";
+ };
+
+ ecspi@63fac000 { /* ECSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ status = "disabled";
+ };
+
+ sdma@63fb0000 {
+ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ };
+
+ cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ i2c@63fc4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ status = "disabled";
+ };
+
+ i2c@63fc8000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-i2c", "fsl,imx1-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ fec@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..072974e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Automotive Board";
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ soc {
+ aips-bus@02100000 { /* AIPS2 */
+ enet@02188000 {
+ phy-mode = "rgmii";
+ local-mac-address = [00 04 9F 01 1B 61];
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+ wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+ status = "okay";
+ };
+
+ usdhc@0219c000 { /* uSDHC4 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart3: uart@021f0000 { /* UART4 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 25 0>; /* GPIO3_25 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
new file mode 100644
index 0000000..7dda599
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -0,0 +1,575 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: interrupt-controller@00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer@00a00600 {
+ compatible = "arm,smp-twd";
+ reg = <0x00a00600 0x100>;
+ interrupts = <1 13 0xf4>;
+ };
+
+ L2: l2-cache@00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips-bus@02000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus@02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif@02004000 {
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 0x04>;
+ };
+
+ ecspi@02008000 { /* eCSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@0200c000 { /* eCSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02010000 { /* eCSPI3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02014000 { /* eCSPI4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 0x04>;
+ status = "disabled";
+ };
+
+ ecspi@02018000 { /* eCSPI5 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 35 0x04>;
+ status = "disabled";
+ };
+
+ uart0: uart@02020000 { /* UART1 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ status = "disabled";
+ };
+
+ esai@02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ };
+
+ ssi@02028000 { /* SSI1 */
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 0x04>;
+ };
+
+ ssi@0202c000 { /* SSI2 */
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 0x04>;
+ };
+
+ ssi@02030000 { /* SSI3 */
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 0x04>;
+ };
+
+ asrc@02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 0x04>;
+ };
+
+ spba@0203c000 {
+ reg = <0x0203c000 0x4000>;
+ };
+ };
+
+ vpu@02040000 {
+ reg = <0x02040000 0x3c000>;
+ interrupts = <0 3 0x04 0 12 0x04>;
+ };
+
+ aipstz@0207c000 { /* AIPSTZ1 */
+ reg = <0x0207c000 0x4000>;
+ };
+
+ pwm@02080000 { /* PWM1 */
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 0x04>;
+ };
+
+ pwm@02084000 { /* PWM2 */
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 0x04>;
+ };
+
+ pwm@02088000 { /* PWM3 */
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 0x04>;
+ };
+
+ pwm@0208c000 { /* PWM4 */
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 0x04>;
+ };
+
+ flexcan@02090000 { /* CAN1 */
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 0x04>;
+ };
+
+ flexcan@02094000 { /* CAN2 */
+ reg = <0x02094000 0x4000>;
+ interrupts = <0 111 0x04>;
+ };
+
+ gpt@02098000 {
+ compatible = "fsl,imx6q-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ };
+
+ gpio0: gpio@0209c000 { /* GPIO1 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 0x04 0 67 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio@020a0000 { /* GPIO2 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 0x04 0 69 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio@020a4000 { /* GPIO3 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 0x04 0 71 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio@020a8000 { /* GPIO4 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 0x04 0 73 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio@020ac000 { /* GPIO5 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 0x04 0 75 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio@020b0000 { /* GPIO6 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <0 76 0x04 0 77 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio@020b4000 { /* GPIO7 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <0 78 0x04 0 79 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ kpp@020b8000 {
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 0x04>;
+ };
+
+ wdog@020bc000 { /* WDOG1 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ status = "disabled";
+ };
+
+ wdog@020c0000 { /* WDOG2 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 0x04>;
+ status = "disabled";
+ };
+
+ ccm@020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ };
+
+ anatop@020c8000 {
+ compatible = "fsl,imx6q-anatop";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ };
+
+ usbphy@020c9000 { /* USBPHY1 */
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ };
+
+ usbphy@020ca000 { /* USBPHY2 */
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 0x04>;
+ };
+
+ snvs@020cc000 {
+ reg = <0x020cc000 0x4000>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+
+ epit@020d0000 { /* EPIT1 */
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 0x04>;
+ };
+
+ epit@020d4000 { /* EPIT2 */
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 0x04>;
+ };
+
+ src@020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ };
+
+ gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04 0 90 0x04>;
+ };
+
+ iomuxc@020e0000 {
+ reg = <0x020e0000 0x4000>;
+ };
+
+ dcic@020e4000 { /* DCIC1 */
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 124 0x04>;
+ };
+
+ dcic@020e8000 { /* DCIC2 */
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 125 0x04>;
+ };
+
+ sdma@020ec000 {
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ caam@02100000 {
+ reg = <0x02100000 0x40000>;
+ interrupts = <0 105 0x04 0 106 0x04>;
+ };
+
+ aipstz@0217c000 { /* AIPSTZ2 */
+ reg = <0x0217c000 0x4000>;
+ };
+
+ enet@02188000 {
+ compatible = "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 118 0x04 0 119 0x04>;
+ status = "disabled";
+ };
+
+ mlb@0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ };
+
+ usdhc@02190000 { /* uSDHC1 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@02194000 { /* uSDHC2 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ status = "disabled";
+ };
+
+ usdhc@0219c000 { /* uSDHC4 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a0000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ status = "disabled";
+ };
+
+ i2c@021a8000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ status = "disabled";
+ };
+
+ romcp@021ac000 {
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc@021b0000 { /* MMDC0 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ mmdc@021b4000 { /* MMDC1 */
+ reg = <0x021b4000 0x4000>;
+ };
+
+ weim@021b8000 {
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ };
+
+ ocotp@021bc000 {
+ reg = <0x021bc000 0x4000>;
+ };
+
+ ocotp@021c0000 {
+ reg = <0x021c0000 0x4000>;
+ interrupts = <0 21 0x04>;
+ };
+
+ tzasc@021d0000 { /* TZASC1 */
+ reg = <0x021d0000 0x4000>;
+ interrupts = <0 108 0x04>;
+ };
+
+ tzasc@021d4000 { /* TZASC2 */
+ reg = <0x021d4000 0x4000>;
+ interrupts = <0 109 0x04>;
+ };
+
+ audmux@021d8000 {
+ reg = <0x021d8000 0x4000>;
+ };
+
+ mipi@021dc000 { /* MIPI-CSI */
+ reg = <0x021dc000 0x4000>;
+ };
+
+ mipi@021e0000 { /* MIPI-DSI */
+ reg = <0x021e0000 0x4000>;
+ };
+
+ vdoa@021e4000 {
+ reg = <0x021e4000 0x4000>;
+ interrupts = <0 18 0x04>;
+ };
+
+ uart1: uart@021e8000 { /* UART2 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <0 27 0x04>;
+ status = "disabled";
+ };
+
+ uart2: uart@021ec000 { /* UART3 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <0 28 0x04>;
+ status = "disabled";
+ };
+
+ uart3: uart@021f0000 { /* UART4 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <0 29 0x04>;
+ status = "disabled";
+ };
+
+ uart4: uart@021f4000 { /* UART5 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <0 30 0x04>;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
new file mode 100644
index 0000000..15ded0d
--- /dev/null
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Qualcomm MSM8660 SURF";
+ compatible = "qcom,msm8660-surf", "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@02080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ serial@19c400000 {
+ compatible = "qcom,msm-hsuart", "qcom,msm-uart";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <195>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 0000000..9486be6
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+ model = "TI OMAP3 BeagleBoard";
+ compatible = "ti,omap3-beagle", "ti,omap3";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
new file mode 100644
index 0000000..d202bb5
--- /dev/null
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap3430", "ti,omap3";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a8";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap3-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ iva {
+ compatible = "ti,iva2.2";
+ ti,hwmods = "iva";
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ };
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP3 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main";
+
+ intc: interrupt-controller@1 {
+ compatible = "ti,omap3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
new file mode 100644
index 0000000..c702657
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 PandaBoard";
+ compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
new file mode 100644
index 0000000..066e28c
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap4.dtsi"
+
+/ {
+ model = "TI OMAP4 SDP board";
+ compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1 GB */
+ };
+};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
new file mode 100644
index 0000000..4c61c82
--- /dev/null
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Carveout for multimedia usecases
+ * It should be the last 48MB of the first 512MB memory part
+ * In theory, it should not even exist. That zone should be reserved
+ * dynamically during the .reserve callback.
+ */
+/memreserve/ 0x9d000000 0x03000000;
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "ti,omap4430", "ti,omap4";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is uses for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap4-mpu";
+ ti,hwmods = "mpu";
+ };
+
+ dsp {
+ compatible = "ti,omap3-c64";
+ ti,hwmods = "dsp";
+ };
+
+ iva {
+ compatible = "ti,ivahd";
+ ti,hwmods = "iva";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the OMAP4 interconnect.
+ * The real OMAP interconnect network is quite complex.
+ *
+ * MPU -+-- MPU_PRIVATE - GIC, L2
+ * |
+ * +----------------+----------+
+ * | | |
+ * + +- EMIF - DDR |
+ * | | |
+ * | + +--------+
+ * | | |
+ * | +- L4_ABE - AESS, MCBSP, TIMERs...
+ * | |
+ * +- L3_MAIN --+- L4_CORE - IPs...
+ * |
+ * +- L4_PER - IPs...
+ * |
+ * +- L4_CFG -+- L4_WKUP - IPs...
+ * | |
+ * | +- IPs...
+ * +- IPU ----+
+ * | |
+ * +- DSP ----+
+ * | |
+ * +- DSS ----+
+ *
+ * Since that will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp {
+ compatible = "ti,omap4-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+
+ gic: interrupt-controller@48241000 {
+ compatible = "arm,cortex-a9-gic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x48241000 0x1000>,
+ <0x48240100 0x0100>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
new file mode 100644
index 0000000..f0a8c20
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X2";
+ compatible = "picochip,pc3x2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ clock-frequency = <400000000>;
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pclk: clock@0 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x2";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&pclk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ timer2: timer@10028 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x10028 0x14>;
+ };
+
+ timer3: timer@1003c {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x1003c 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x2";
+ reg = <0xc0000000 0x10000>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
new file mode 100644
index 0000000..daa962d
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi
@@ -0,0 +1,365 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+ model = "Picochip picoXcell PC3X3";
+ compatible = "picochip,pc3x3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,1176jz-s";
+ cpu-clock = <&arm_clk>, "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clkgate: clkgate@800a0048 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x800a0048 4>;
+ compatible = "picochip,pc3x3-clk-gate";
+
+ tzprot_clk: clock@0 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <0>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ spi_clk: clock@1 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <1>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac0_clk: clock@2 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <2>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ dmac1_clk: clock@3 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <3>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ebi_clk: clock@4 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <4>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ ipsec_clk: clock@5 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <5>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ l2_clk: clock@6 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <6>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ trng_clk: clock@7 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <7>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ fuse_clk: clock@8 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <8>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+
+ otp_clk: clock@9 {
+ compatible = "picochip,pc3x3-gated-clk";
+ clock-outputs = "bus";
+ picochip,clk-disable-bit = <9>;
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ arm_clk: clock@11 {
+ compatible = "picochip,pc3x3-pll";
+ reg = <0x800a0050 0x8>;
+ picochip,min-freq = <140000000>;
+ picochip,max-freq = <700000000>;
+ ref-clock = <&ref_clk>, "ref";
+ clock-outputs = "cpu";
+ };
+
+ pclk: clock@12 {
+ compatible = "fixed-clock";
+ clock-outputs = "bus", "pclk";
+ clock-frequency = <200000000>;
+ ref-clock = <&ref_clk>, "ref";
+ };
+ };
+
+ paxi {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x80000000 0x400000>;
+
+ emac: gem@30000 {
+ compatible = "cadence,gem";
+ reg = <0x30000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <31>;
+ };
+
+ dmac1: dmac@40000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x40000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <25>;
+ };
+
+ dmac2: dmac@50000 {
+ compatible = "snps,dw-dmac";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <26>;
+ };
+
+ vic0: interrupt-controller@60000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x60000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: interrupt-controller@64000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ reg = <0x64000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ fuse: picoxcell-fuse@80000 {
+ compatible = "picoxcell,fuse-pc3x3";
+ reg = <0x80000 0x10000>;
+ };
+
+ ssi: picoxcell-spi@90000 {
+ compatible = "picoxcell,spi";
+ reg = <0x90000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <10>;
+ };
+
+ ipsec: spacc@100000 {
+ compatible = "picochip,spacc-ipsec";
+ reg = <0x100000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <24>;
+ ref-clock = <&ipsec_clk>, "ref";
+ };
+
+ srtp: spacc@140000 {
+ compatible = "picochip,spacc-srtp";
+ reg = <0x140000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <23>;
+ };
+
+ l2_engine: spacc@180000 {
+ compatible = "picochip,spacc-l2";
+ reg = <0x180000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <22>;
+ ref-clock = <&l2_clk>, "ref";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x200000 0x80000>;
+
+ rtc0: rtc@00000 {
+ compatible = "picochip,pc3x2-rtc";
+ clock-freq = <200000000>;
+ reg = <0x00000 0xf>;
+ interrupt-parent = <&vic0>;
+ interrupts = <8>;
+ };
+
+ timer0: timer@10000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <4>;
+ clock-freq = <200000000>;
+ reg = <0x10000 0x14>;
+ };
+
+ timer1: timer@10014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <5>;
+ clock-freq = <200000000>;
+ reg = <0x10014 0x14>;
+ };
+
+ gpio: gpio@20000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x20000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-io-width = <4>;
+
+ banka: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <8>;
+
+ regoffset-dat = <0x50>;
+ regoffset-set = <0x00>;
+ regoffset-dirout = <0x04>;
+ };
+
+ bankb: gpio-controller@1 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <16>;
+
+ regoffset-dat = <0x54>;
+ regoffset-set = <0x0c>;
+ regoffset-dirout = <0x10>;
+ };
+
+ bankd: gpio-controller@2 {
+ compatible = "snps,dw-apb-gpio-bank";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-generic,nr-gpio = <30>;
+
+ regoffset-dat = <0x5c>;
+ regoffset-set = <0x24>;
+ regoffset-dirout = <0x28>;
+ };
+ };
+
+ uart0: uart@30000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x30000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <10>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: uart@40000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x40000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <9>;
+ clock-frequency = <3686400>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ wdog: watchdog@50000 {
+ compatible = "snps,dw-apb-wdg";
+ reg = <0x50000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <11>;
+ bus-clock = <&pclk>, "bus";
+ };
+
+ timer2: timer@60000 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <6>;
+ clock-freq = <200000000>;
+ reg = <0x60000 0x14>;
+ };
+
+ timer3: timer@60014 {
+ compatible = "picochip,pc3x2-timer";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>;
+ clock-freq = <200000000>;
+ reg = <0x60014 0x14>;
+ };
+ };
+ };
+
+ rwid-axi {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ ebi@50000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x40000000 0x08000000
+ 1 0 0x48000000 0x08000000
+ 2 0 0x50000000 0x08000000
+ 3 0 0x58000000 0x08000000>;
+ };
+
+ axi2pico@c0000000 {
+ compatible = "picochip,axi2pico-pc3x3";
+ reg = <0xc0000000 0x10000>;
+ interrupt-parent = <&vic0>;
+ interrupts = <13 14 15 16 17 18 19 20 21>;
+ };
+
+ otp@ffff8000 {
+ compatible = "picochip,otp-pc3x3";
+ reg = <0xffff8000 0x8000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 0000000..1297414
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X2)";
+ compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@1 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&pclk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 0000000..9e317a4
--- /dev/null
+++ b/arch/arm/boot/dts/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+ model = "Picochip PC7302 (PC3X3)";
+ compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ chosen {
+ linux,stdout-path = &uart0;
+ };
+
+ clocks {
+ ref_clk: clock@10 {
+ compatible = "fixed-clock";
+ clock-outputs = "ref";
+ clock-frequency = <20000000>;
+ };
+
+ clkgate: clkgate@800a0048 {
+ clock@4 {
+ picochip,clk-no-disable;
+ };
+ };
+ };
+
+ rwid-axi {
+ ebi@50000000 {
+ nand: gpio-nand@2,0 {
+ compatible = "gpio-control-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2 0x0000 0x1000>;
+ bus-clock = <&ebi_clk>, "bus";
+ gpio-control-nand,io-sync-reg =
+ <0x00000000 0x80220000>;
+
+ gpios = <&banka 1 0 /* rdy */
+ &banka 2 0 /* nce */
+ &banka 3 0 /* ale */
+ &banka 4 0 /* cle */
+ 0 /* nwp */>;
+
+ boot@100000 {
+ label = "Boot";
+ reg = <0x100000 0x80000>;
+ };
+
+ redundant-boot@200000 {
+ label = "Redundant Boot";
+ reg = <0x200000 0x80000>;
+ };
+
+ boot-env@300000 {
+ label = "Boot Evironment";
+ reg = <0x300000 0x20000>;
+ };
+
+ redundant-boot-env@320000 {
+ label = "Redundant Boot Environment";
+ reg = <0x300000 0x20000>;
+ };
+
+ kernel@380000 {
+ label = "Kernel";
+ reg = <0x380000 0x800000>;
+ };
+
+ fs@b80000 {
+ label = "File System";
+ reg = <0xb80000 0xf480000>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts
index 6fecc88..34ae3a6 100644
--- a/arch/arm/boot/dts/prima2-cb.dts
+++ b/arch/arm/boot/dts/prima2-cb.dts
@@ -39,9 +39,12 @@
ranges = <0x40000000 0x40000000 0x80000000>;
l2-cache-controller@80040000 {
- compatible = "arm,pl310-cache";
+ compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
reg = <0x80040000 0x1000>;
interrupts = <59>;
+ arm,tag-latency = <1 1 1>;
+ arm,data-latency = <1 1 1>;
+ arm,filter-ranges = <0 0x40000000>;
};
intc: interrupt-controller@80020000 {
@@ -67,6 +70,11 @@
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
};
+
+ rsc-controller@88020000 {
+ compatible = "sirf,prima2-rsc";
+ reg = <0x88020000 0x1000>;
+ };
};
mem-iobg {
@@ -274,7 +282,7 @@
gpio: gpio-controller@b0120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
- compatible = "sirf,prima2-gpio";
+ compatible = "sirf,prima2-gpio-pinmux";
reg = <0xb0120000 0x10000>;
gpio-controller;
interrupt-controller;
@@ -358,7 +366,7 @@
};
rtc-iobg {
- compatible = "sirf,prima2-rtciobg", "simple-bus";
+ compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80030000 0x10000>;
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index e581866..0e225b8 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -66,5 +66,6 @@
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
};
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 64cedca..a72299b 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -25,4 +25,8 @@
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
+
+ sdhci@c8000600 {
+ support-8bit;
+ };
};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
new file mode 100644
index 0000000..9b29a62
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Tegra2 Ventana evaluation board";
+ compatible = "nvidia,ventana", "nvidia,tegra20";
+
+ chosen {
+ bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
+ };
+
+ memory {
+ reg = < 0x00000000 0x40000000 >;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ sdhci@c8000400 {
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ };
+
+ sdhci@c8000600 {
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
+ };
+};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 5727595..65d7e6a 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -77,6 +77,14 @@
gpio-controller;
};
+ pinmux: pinmux@70000000 {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = < 0x70000014 0x10 /* Tri-state registers */
+ 0x70000080 0x20 /* Mux registers */
+ 0x700000a0 0x14 /* Pull-up/down registers */
+ 0x70000868 0xa8 >; /* Pad control registers */
+ };
+
serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
new file mode 100644
index 0000000..d66e2c0
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -0,0 +1,30 @@
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+ model = "Calao USB A9G20";
+ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory@20000000 {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 4b71766..74df9ca 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,4 +1,5 @@
config ARM_GIC
+ select IRQ_DOMAIN
bool
config ARM_VIC
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index a8fc6b2..0e6ae47 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -24,11 +24,17 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
#include <linux/list.h>
#include <linux/smp.h>
#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/slab.h>
@@ -75,8 +81,7 @@
static inline unsigned int gic_irq(struct irq_data *d)
{
- struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
- return d->irq - gic_data->irq_offset;
+ return d->hwirq;
}
/*
@@ -84,7 +89,7 @@
*/
static void gic_mask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
raw_spin_lock(&irq_controller_lock);
writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
@@ -95,7 +100,7 @@
static void gic_unmask_irq(struct irq_data *d)
{
- u32 mask = 1 << (d->irq % 32);
+ u32 mask = 1 << (gic_irq(d) % 32);
raw_spin_lock(&irq_controller_lock);
if (gic_arch_extn.irq_unmask)
@@ -176,7 +181,7 @@
bool force)
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
- unsigned int shift = (d->irq % 4) * 8;
+ unsigned int shift = (gic_irq(d) % 4) * 8;
unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
u32 val, mask, bit;
@@ -227,7 +232,7 @@
if (gic_irq == 1023)
goto out;
- cascade_irq = gic_irq + chip_data->irq_offset;
+ cascade_irq = irq_domain_to_irq(&chip_data->domain, gic_irq);
if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS))
do_bad_IRQ(cascade_irq, desc);
else
@@ -259,14 +264,14 @@
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
-static void __init gic_dist_init(struct gic_chip_data *gic,
- unsigned int irq_start)
+static void __init gic_dist_init(struct gic_chip_data *gic)
{
- unsigned int gic_irqs, irq_limit, i;
+ unsigned int i, irq;
u32 cpumask;
+ unsigned int gic_irqs = gic->gic_irqs;
+ struct irq_domain *domain = &gic->domain;
void __iomem *base = gic->dist_base;
u32 cpu = 0;
- u32 nrppis = 0, ppi_base = 0;
#ifdef CONFIG_SMP
cpu = cpu_logical_map(smp_processor_id());
@@ -279,34 +284,6 @@
writel_relaxed(0, base + GIC_DIST_CTRL);
/*
- * Find out how many interrupts are supported.
- * The GIC only supports up to 1020 interrupt sources.
- */
- gic_irqs = readl_relaxed(base + GIC_DIST_CTR) & 0x1f;
- gic_irqs = (gic_irqs + 1) * 32;
- if (gic_irqs > 1020)
- gic_irqs = 1020;
-
- gic->gic_irqs = gic_irqs;
-
- /*
- * Nobody would be insane enough to use PPIs on a secondary
- * GIC, right?
- */
- if (gic == &gic_data[0]) {
- nrppis = (32 - irq_start) & 31;
-
- /* The GIC only supports up to 16 PPIs. */
- if (nrppis > 16)
- BUG();
-
- ppi_base = gic->irq_offset + 32 - nrppis;
- }
-
- pr_info("Configuring GIC with %d sources (%d PPIs)\n",
- gic_irqs, (gic == &gic_data[0]) ? nrppis : 0);
-
- /*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
@@ -332,29 +309,20 @@
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
- * Limit number of interrupts registered to the platform maximum
- */
- irq_limit = gic->irq_offset + gic_irqs;
- if (WARN_ON(irq_limit > NR_IRQS))
- irq_limit = NR_IRQS;
-
- /*
* Setup the Linux IRQ subsystem.
*/
- for (i = 0; i < nrppis; i++) {
- int ppi = i + ppi_base;
-
- irq_set_percpu_devid(ppi);
- irq_set_chip_and_handler(ppi, &gic_chip,
- handle_percpu_devid_irq);
- irq_set_chip_data(ppi, gic);
- set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
- }
-
- for (i = irq_start + nrppis; i < irq_limit; i++) {
- irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
- irq_set_chip_data(i, gic);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ irq_domain_for_each_irq(domain, i, irq) {
+ if (i < 32) {
+ irq_set_percpu_devid(irq);
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_percpu_devid_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
+ } else {
+ irq_set_chip_and_handler(irq, &gic_chip,
+ handle_fasteoi_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ irq_set_chip_data(irq, gic);
}
writel_relaxed(1, base + GIC_DIST_CTRL);
@@ -566,23 +534,85 @@
}
#endif
-void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
+#ifdef CONFIG_OF
+static int gic_irq_domain_dt_translate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ if (d->of_node != controller)
+ return -EINVAL;
+ if (intsize < 3)
+ return -EINVAL;
+
+ /* Get the interrupt number and add 16 to skip over SGIs */
+ *out_hwirq = intspec[1] + 16;
+
+ /* For SPIs, we need to add 16 more to get the GIC irq ID number */
+ if (!intspec[0])
+ *out_hwirq += 16;
+
+ *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
+ return 0;
+}
+#endif
+
+const struct irq_domain_ops gic_irq_domain_ops = {
+#ifdef CONFIG_OF
+ .dt_translate = gic_irq_domain_dt_translate,
+#endif
+};
+
+void __init gic_init(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
struct gic_chip_data *gic;
+ struct irq_domain *domain;
+ int gic_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
gic = &gic_data[gic_nr];
+ domain = &gic->domain;
gic->dist_base = dist_base;
gic->cpu_base = cpu_base;
- gic->irq_offset = (irq_start - 1) & ~31;
- if (gic_nr == 0)
+ /*
+ * For primary GICs, skip over SGIs.
+ * For secondary GICs, skip over PPIs, too.
+ */
+ if (gic_nr == 0) {
gic_cpu_base_addr = cpu_base;
+ domain->hwirq_base = 16;
+ if (irq_start > 0)
+ irq_start = (irq_start & ~31) + 16;
+ } else
+ domain->hwirq_base = 32;
+
+ /*
+ * Find out how many interrupts are supported.
+ * The GIC only supports up to 1020 interrupt sources.
+ */
+ gic_irqs = readl_relaxed(dist_base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
+ gic->gic_irqs = gic_irqs;
+
+ domain->nr_irq = gic_irqs - domain->hwirq_base;
+ domain->irq_base = irq_alloc_descs(irq_start, 16, domain->nr_irq,
+ numa_node_id());
+ if (IS_ERR_VALUE(domain->irq_base)) {
+ WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+ irq_start);
+ domain->irq_base = irq_start;
+ }
+ domain->priv = gic;
+ domain->ops = &gic_irq_domain_ops;
+ irq_domain_add(domain);
gic_chip.flags |= gic_arch_extn.flags;
- gic_dist_init(gic, irq_start);
+ gic_dist_init(gic);
gic_cpu_init(gic);
gic_pm_init(gic);
}
@@ -614,3 +644,35 @@
writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
}
#endif
+
+#ifdef CONFIG_OF
+static int gic_cnt __initdata = 0;
+
+int __init gic_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *cpu_base;
+ void __iomem *dist_base;
+ int irq;
+ struct irq_domain *domain = &gic_data[gic_cnt].domain;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ dist_base = of_iomap(node, 0);
+ WARN(!dist_base, "unable to map gic dist registers\n");
+
+ cpu_base = of_iomap(node, 1);
+ WARN(!cpu_base, "unable to map gic cpu registers\n");
+
+ domain->of_node = of_node_get(node);
+
+ gic_init(gic_cnt, -1, dist_base, cpu_base);
+
+ if (parent) {
+ irq = irq_of_parse_and_map(node, 0);
+ gic_cascade_irq(gic_cnt, irq);
+ }
+ gic_cnt++;
+ return 0;
+}
+#endif
diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig
new file mode 100644
index 0000000..c5876d2
--- /dev/null
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -0,0 +1,214 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G45=y
+CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_CFG80211=y
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_ATH_COMMON=m
+CONFIG_ATH9K=m
+CONFIG_CARL9170=m
+CONFIG_B43=m
+CONFIG_B43_PHY_N=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8192CU=m
+CONFIG_WL1251=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX_MENU=m
+CONFIG_WL12XX=m
+CONFIG_WL12XX_SDIO=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_QT2160=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_ATMEL=y
+CONFIG_FB_UDL=m
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB_AUDIO=m
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_ATMELMCI_DMA=y
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_DMADEVICES=y
+CONFIG_AT_HDMAC=y
+CONFIG_DMATEST=m
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3..cd40bb5 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@
CONFIG_MACH_ARMLEX4210=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
similarity index 69%
rename from arch/arm/configs/mx27_defconfig
rename to arch/arm/configs/imx_v4_v5_defconfig
index 9ad4c656..11a4192 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -3,9 +3,7 @@
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
CONFIG_PROFILING=y
@@ -17,8 +15,12 @@
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX27=y
+CONFIG_ARCH_IMX_V4_V5=y
+CONFIG_ARCH_MX1ADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MACH_MX21ADS=y
+CONFIG_MACH_MX25_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX25=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
@@ -29,6 +31,7 @@
CONFIG_MACH_IMX27LITE=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_MXT_TD60=y
+CONFIG_MACH_IMX27IPCAM=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
@@ -39,7 +42,6 @@
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -55,8 +57,9 @@
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -69,12 +72,15 @@
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
+CONFIG_SMC91X=y
+CONFIG_DM9000=y
+CONFIG_SMC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV is not set
@@ -84,10 +90,10 @@
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -98,19 +104,56 @@
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
CONFIG_FB=y
CONFIG_FB_IMX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=m
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_MX27VIS_AIC32X4=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB_HID=m
+CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_MC13783=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_IMXDI=y
+CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
@@ -119,12 +162,9 @@
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=m
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
deleted file mode 100644
index c9436d0..0000000
--- a/arch/arm/configs/mx1_defconfig
+++ /dev/null
@@ -1,91 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX1=y
-CONFIG_ARCH_MX1ADS=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
deleted file mode 100644
index 411f88d..0000000
--- a/arch/arm/configs/mx21_defconfig
+++ /dev/null
@@ -1,97 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 7c4b30b..cb0717f 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -3,7 +3,6 @@
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
@@ -13,20 +12,21 @@
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31LITE=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_QONG=y
-CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
+CONFIG_ARM_ERRATA_411920=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
@@ -35,7 +35,6 @@
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
CONFIG_VFP=y
-CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
@@ -52,7 +51,6 @@
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_FW_LOADER=m
CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
@@ -62,24 +60,27 @@
CONFIG_MTD_NAND_MXC=y
CONFIG_MTD_UBI=y
# CONFIG_BLK_DEV is not set
+CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT24=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
CONFIG_DNET=y
-CONFIG_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_IMX=y
+# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
@@ -89,12 +90,15 @@
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_WM8350=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_VIDEO_DEV=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9M111=y
@@ -105,9 +109,26 @@
CONFIG_VIDEO_MX3=y
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_FB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_WM1133_EV1=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_FSL_USB2=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_MXC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
@@ -119,6 +140,5 @@
CONFIG_ROOT_NFS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx5_defconfig
similarity index 82%
rename from arch/arm/configs/mx51_defconfig
rename to arch/arm/configs/mx5_defconfig
index 88c5802..d0d8dfe 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx5_defconfig
@@ -1,5 +1,6 @@
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_RELAY=y
@@ -13,21 +14,29 @@
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX51=y
+CONFIG_ARCH_MX5=y
CONFIG_MACH_MX51_BABBAGE=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_MACH_MX51_EFIKAMX=y
+CONFIG_MACH_MX51_EFIKASB=y
+CONFIG_MACH_MX53_EVK=y
+CONFIG_MACH_MX53_SMD=y
+CONFIG_MACH_MX53_LOCO=y
+CONFIG_MACH_MX53_ARD=y
+CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_NET=y
@@ -42,13 +51,13 @@
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_CONNECTOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
@@ -56,8 +65,10 @@
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
+CONFIG_ATA=y
+CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
+CONFIG_MII=m
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
@@ -71,49 +82,57 @@
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_GPIO=y
+CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MMA8450=y
CONFIG_SERIO_SERPORT=m
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13892=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=m
-CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_MXC=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
@@ -127,7 +146,6 @@
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_ISO9660_FS=m
@@ -151,17 +169,13 @@
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=m
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index db2cb7d..6ee781b 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,6 +26,7 @@
CONFIG_MACH_MX28EVK=y
CONFIG_MACH_STMP378X_DEVB=y
CONFIG_MACH_TX28=y
+CONFIG_MACH_M28EVK=y
# CONFIG_ARM_THUMB is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 8845f1c..1957297 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -25,6 +25,7 @@
CONFIG_MACH_PAZ00=y
CONFIG_MACH_TRIMSLICE=y
CONFIG_MACH_WARIO=y
+CONFIG_MACH_VENTANA=y
CONFIG_TEGRA_DEBUG_UARTD=y
CONFIG_ARM_ERRATA_742230=y
CONFIG_NO_HZ=y
@@ -38,7 +39,6 @@
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_VFP=y
-CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -65,6 +65,7 @@
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_WIRELESS is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
@@ -72,34 +73,61 @@
CONFIG_ICS932S401=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
+CONFIG_NET_ETHERNET=y
CONFIG_R8169=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_TEGRA=y
+CONFIG_SPI=y
+CONFIG_SPI_TEGRA=y
CONFIG_SENSORS_LM90=y
CONFIG_MFD_TPS6586X=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_TPS6586X=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_TEGRA=y
+CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TEGRA=y
CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
CONFIG_IIO=y
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_AK8975=y
@@ -123,18 +151,15 @@
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_SG=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_ECB=y
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index 6615f03..7aa3680 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -15,7 +15,12 @@
#endif
};
+struct omap_device;
+
struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+ struct omap_device *od;
+#endif
};
#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index 434edcc..1db1143 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -102,7 +102,14 @@
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF)
extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask);
+#else
+static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask)
+{
+ return -ENODEV;
+}
+#endif
struct l2x0_regs {
unsigned long phy_base;
@@ -121,6 +128,6 @@
extern struct l2x0_regs l2x0_saved_regs;
-#endif
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 14867e1..3e91f22 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -33,16 +33,19 @@
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
+#include <linux/irqdomain.h>
+struct device_node;
+
extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
-void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+void gic_init(unsigned int, int, void __iomem *, void __iomem *);
+int gic_of_init(struct device_node *node, struct device_node *parent);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
struct gic_chip_data {
- unsigned int irq_offset;
void __iomem *dist_base;
void __iomem *cpu_base;
#ifdef CONFIG_CPU_PM
@@ -52,6 +55,9 @@
u32 __percpu *saved_ppi_enable;
u32 __percpu *saved_ppi_conf;
#endif
+#ifdef CONFIG_IRQ_DOMAIN
+ struct irq_domain domain;
+#endif
unsigned int gic_irqs;
};
#endif
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index b3fea38..43cab49 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -9,7 +9,7 @@
#ifndef __ASM_HARDWARE_IT8152_H
#define __ASM_HARDWARE_IT8152_H
-extern unsigned long it8152_base_address;
+extern void __iomem *it8152_base_address;
#define IT8152_IO_BASE (it8152_base_address + 0x03e00000)
#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2248467..a6b7991 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -182,6 +182,11 @@
help
Select this if you are using the eco920 board
+config MACH_RSI_EWS
+ bool "RSI Embedded Webserver"
+ depends on ARCH_AT91RM9200
+ help
+ Select this if you are using RSIs EWS board.
endif
# ----------------------------------------------------------
@@ -381,6 +386,14 @@
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
+
+config MACH_USB_A9G20
+ bool "CALAO USB-A9G20"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using a Calao Systems USB-A9G20.
+ <http://www.calao-systems.com>
+
endif
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
@@ -442,6 +455,17 @@
# ----------------------------------------------------------
+comment "Generic Board Type"
+
+config MACH_AT91SAM_DT
+ bool "Atmel AT91SAM Evaluation Kits with device-tree support"
+ select USE_OF
+ help
+ Select this if you want to experiment device-tree with
+ an Atmel Evaluation Kit.
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b..242174f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -36,12 +36,13 @@
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
obj-$(CONFIG_MACH_ECO920) += board-eco920.o
+obj-$(CONFIG_MACH_RSI_EWS) += board-rsi-ews.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
obj-$(CONFIG_MACH_CAM60) += board-cam60.o
obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
+obj-$(CONFIG_MACH_USB_A9260) += board-usb-a926x.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
@@ -53,7 +54,7 @@
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263) += board-usb-a9263.o
+obj-$(CONFIG_MACH_USB_A9263) += board-usb-a926x.o
obj-$(CONFIG_MACH_NEOCORE926) += board-neocore926.o
# AT91SAM9RL board-specific support
@@ -67,6 +68,7 @@
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
+obj-$(CONFIG_MACH_USB_A9G20) += board-usb-a926x.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
@@ -74,6 +76,9 @@
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
+# AT91SAM board with device-tree
+obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
+
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 9ab5a3e..8ddafad 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -16,3 +16,5 @@
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
+
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index bfc6844..ecdd54d 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -219,6 +219,8 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index f87f504..a4401d6 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -80,6 +80,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index f73302d..713d3bd 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -193,6 +193,8 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 978be95..01d8bbd 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -60,9 +60,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91rm9200_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index cb397be..b84a9f6 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -199,6 +199,16 @@
CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 3c2b580..24b6f8c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -61,9 +61,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 6c8e3b5..658a518 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -129,6 +129,20 @@
.type = CLK_TYPE_PERIPHERAL,
};
+/* HClocks */
+static struct clk hck0 = {
+ .name = "hck0",
+ .pmc_mask = AT91_PMC_HCK0,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 0,
+};
+static struct clk hck1 = {
+ .name = "hck1",
+ .pmc_mask = AT91_PMC_HCK1,
+ .type = CLK_TYPE_SYSTEM,
+ .id = 1,
+};
+
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
&pioB_clk,
@@ -161,6 +175,7 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -199,20 +214,6 @@
.id = 3,
};
-/* HClocks */
-static struct clk hck0 = {
- .name = "hck0",
- .pmc_mask = AT91_PMC_HCK0,
- .type = CLK_TYPE_SYSTEM,
- .id = 0,
-};
-static struct clk hck1 = {
- .name = "hck1",
- .pmc_mask = AT91_PMC_HCK1,
- .type = CLK_TYPE_SYSTEM,
- .id = 1,
-};
-
static void __init at91sam9261_register_clocks(void)
{
int i;
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 4e647b6..3b70b38 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -64,9 +64,17 @@
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
+ int i;
+
if (!data)
return;
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91sam9261_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 044f3c9..f83fbb0 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -189,6 +189,8 @@
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index dd7662b..3faa1fd 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -74,6 +74,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_data = *data;
platform_device_register(&at91_usbh_device);
}
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1532b50..318b040 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -54,6 +54,11 @@
.pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk trng_clk = {
+ .name = "trng_clk",
+ .pmc_mask = 1 << AT91SAM9G45_ID_TRNG,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk usart0_clk = {
.name = "usart0_clk",
.pmc_mask = 1 << AT91SAM9G45_ID_US0,
@@ -177,6 +182,7 @@
&pioB_clk,
&pioC_clk,
&pioDE_clk,
+ &trng_clk,
&usart0_clk,
&usart1_clk,
&usart2_clk,
@@ -216,6 +222,15 @@
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
+ /* fake hclk clock */
+ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index c3dfb1b..000b5e1 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -124,6 +124,12 @@
at91_set_gpio_output(data->vbus_pin[i], 0);
}
+ /* Enable overcurrent notification */
+ for (i = 0; i < data->ports; i++) {
+ if (data->overcurrent_pin[i])
+ at91_set_gpio_input(data->overcurrent_pin[i], 1);
+ }
+
usbh_ohci_data = *data;
platform_device_register(&at91_usbh_ohci_device);
}
@@ -1095,6 +1101,34 @@
/* --------------------------------------------------------------------
+ * TRNG
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
+static struct resource trng_resources[] = {
+ {
+ .start = AT91SAM9G45_BASE_TRNG,
+ .end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device at91sam9g45_trng_device = {
+ .name = "atmel-trng",
+ .id = -1,
+ .resource = trng_resources,
+ .num_resources = ARRAY_SIZE(trng_resources),
+};
+
+static void __init at91_add_device_trng(void)
+{
+ platform_device_register(&at91sam9g45_trng_device);
+}
+#else
+static void __init at91_add_device_trng(void) {}
+#endif
+
+/* --------------------------------------------------------------------
* Watchdog
* -------------------------------------------------------------------- */
@@ -1583,6 +1617,7 @@
at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
+ at91_add_device_trng();
at91_add_device_watchdog();
at91_add_device_tc();
return 0;
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
new file mode 100644
index 0000000..0b7d327
--- /dev/null
+++ b/arch/arm/mach-at91/board-dt.c
@@ -0,0 +1,123 @@
+/*
+ * Setup code for AT91SAM Evaluation Kits with Device Tree support
+ *
+ * Covers: * AT91SAM9G45-EKES board
+ * * AT91SAM9M10-EKES board
+ * * AT91SAM9M10G45-EK board
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/system_rev.h>
+#include <mach/at91sam9_smc.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.000 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+ .rdy_pin = AT91_PIN_PC8,
+ .enable_pin = AT91_PIN_PC14,
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ ek_nand_data.bus_width_16 = board_have_nand_16bit();
+ /* setup bus-width (8 or 16) */
+ if (ek_nand_data.bus_width_16)
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+ else
+ ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+ /* configure chip-select 3 (NAND) */
+ sam9_smc_configure(3, &ek_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+static const struct of_device_id aic_of_match[] __initconst = {
+ { .compatible = "atmel,at91rm9200-aic", },
+ {},
+};
+
+static void __init at91_dt_init_irq(void)
+{
+ irq_domain_generate_simple(aic_of_match, 0xfffff000, 0);
+ at91_init_irq_default();
+}
+
+static void __init at91_dt_device_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ /* NAND */
+ ek_add_device_nand();
+}
+
+static const char *at91_dt_board_compat[] __initdata = {
+ "atmel,at91sam9m10g45ek",
+ "calao,usb-a9g20",
+ NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
+ /* Maintainer: Atmel */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_dt_init_irq,
+ .init_machine = at91_dt_device_init,
+ .dt_compat = at91_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
new file mode 100644
index 0000000..e927df0
--- /dev/null
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -0,0 +1,233 @@
+/*
+ * board-rsi-ews.c
+ *
+ * Copyright (C)
+ * 2005 SAN People,
+ * 2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include <linux/gpio.h>
+
+#include "generic.h"
+
+static void __init rsi_ews_init_early(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91_initialize(18432000);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ /* This one is for debugging */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ /* Dialin/-out modem interface */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ /* RS485 communication */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/*
+ * Ethernet
+ */
+static struct at91_eth_data rsi_ews_eth_data __initdata = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+/*
+ * USB Host
+ */
+static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
+ .ports = 1,
+};
+
+/*
+ * SD/MC
+ */
+static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
+ .slot_b = 0,
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PB27,
+ .wp_pin = AT91_PIN_PB29,
+};
+
+/*
+ * I2C
+ */
+static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+ {
+ I2C_BOARD_INFO("24c01", 0x50),
+ }
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led rsi_ews_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB6,
+ .active_low = 0,
+ },
+ {
+ .name = "led1",
+ .gpio = AT91_PIN_PB7,
+ .active_low = 0,
+ },
+ {
+ .name = "led2",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 0,
+ },
+ {
+ .name = "led3",
+ .gpio = AT91_PIN_PB9,
+ .active_low = 0,
+ },
+};
+
+/*
+ * DataFlash
+ */
+static struct spi_board_info rsi_ews_spi_devices[] = {
+ { /* DataFlash chip 1*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+ { /* DataFlash chip 2*/
+ .modalias = "mtd_dataflash",
+ .chip_select = 1,
+ .max_speed_hz = 5 * 1000 * 1000,
+ },
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition rsiews_nor_partitions[] = {
+ {
+ .name = "boot",
+ .offset = 0,
+ .size = 3 * SZ_128K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_2M - (3 * SZ_128K)
+ },
+ {
+ .name = "root",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_8M
+ },
+ {
+ .name = "kernelupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 3 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+ {
+ .name = "rootupd",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 9 * SZ_512K,
+ .mask_flags = MTD_WRITEABLE
+ },
+};
+
+static struct physmap_flash_data rsiews_nor_data = {
+ .width = 2,
+ .parts = rsiews_nor_partitions,
+ .nr_parts = ARRAY_SIZE(rsiews_nor_partitions),
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE SZ_16M
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device rsiews_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &rsiews_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+/*
+ * Init Func
+ */
+static void __init rsi_ews_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ at91_set_gpio_output(AT91_PIN_PA21, 0);
+ /* Ethernet */
+ at91_add_device_eth(&rsi_ews_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&rsi_ews_usbh_data);
+ /* I2C */
+ at91_add_device_i2c(rsi_ews_i2c_devices,
+ ARRAY_SIZE(rsi_ews_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(rsi_ews_spi_devices,
+ ARRAY_SIZE(rsi_ews_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(0, &rsi_ews_mmc_data);
+ /* NOR Flash */
+ platform_device_register(&rsiews_nor_flash);
+ /* LEDs */
+ at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
+}
+
+MACHINE_START(RSI_EWS, "RSI EWS")
+ /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
+ .timer = &at91rm9200_timer,
+ .map_io = at91_map_io,
+ .init_early = rsi_ews_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = rsi_ews_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
deleted file mode 100644
index bac9b65..0000000
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9260.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.000 MHz crystal */
- at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA31,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Uboot & Kernel",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * GPIO Buttons
- */
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 0,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
- /* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
deleted file mode 100644
index 5bd7357..0000000
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9263.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- * Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.00 MHz crystal */
- at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PB11,
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- }
-#endif
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Linux Kernel",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Root FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- },
- {
- .name = "FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 120 * SZ_1M,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(ek_nand_partition);
- return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
-// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PA22,
- .enable_pin = AT91_PIN_PD15,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* USER PUSH BUTTON */
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB10,
- .active_low = 1,
- .desc = "user_pb",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
- at91_set_deglitch(AT91_PIN_PB10, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* user_led (green) */
- .name = "user_led",
- .gpio = AT91_PIN_PB21,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* shutdown controller, wakeup button (5 msec low) */
- at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
- | AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9263, "CALAO USB_A9263")
- /* Maintainer: calao-systems */
- .timer = &at91sam926x_timer,
- .map_io = at91_map_io,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
new file mode 100644
index 0000000..5852d3d
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -0,0 +1,383 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a926x.c
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2007 Calao-systems
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+ /* Initialize processor: 12.00 MHz crystal */
+ at91_initialize(12000000);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PB11,
+ .pullup_pin = 0, /* pull-up driven by UDC */
+};
+
+static void __init ek_add_device_udc(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_udc_data.vbus_pin = AT91_PIN_PC5;
+
+ at91_add_device_udc(&ek_udc_data);
+}
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
+static int at91_mmc_spi_init(struct device *dev,
+ irqreturn_t (*detect_int)(int, void *), void *data)
+{
+ /* Configure Interrupt pin as input, no pull-up */
+ at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
+ return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-spi-detect", data);
+}
+
+static void at91_mmc_spi_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
+}
+
+static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
+ .init = at91_mmc_spi_init,
+ .exit = at91_mmc_spi_exit,
+ .detect_delay = 100, /* msecs */
+};
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info usb_a9263_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ }
+#endif
+};
+
+static struct spi_board_info usb_a9g20_spi_devices[] = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+ {
+ .modalias = "mmc_spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &at91_mmc_spi_pdata,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+static void __init ek_add_device_spi(void)
+{
+ if (machine_is_usb_a9263())
+ at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
+ else if (machine_is_usb_a9g20())
+ at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
+}
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
+ .is_rmii = 1,
+};
+
+static void __init ek_add_device_eth(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
+
+ at91_add_device_eth(&ek_macb_data);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+ {
+ .name = "barebox",
+ .offset = 0,
+ .size = 3 * SZ_128K,
+ }, {
+ .name = "bareboxenv",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
+ .name = "bareboxenv2",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_128K,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 4 * SZ_1M,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 120 * SZ_1M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(ek_nand_partition);
+ return ek_nand_partition;
+}
+
+static struct atmel_nand_data __initdata ek_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+ .rdy_pin = AT91_PIN_PA22,
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+};
+
+static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 1,
+ .ncs_write_setup = 0,
+ .nwe_setup = 1,
+
+ .ncs_read_pulse = 3,
+ .nrd_pulse = 3,
+ .ncs_write_pulse = 3,
+ .nwe_pulse = 3,
+
+ .read_cycle = 5,
+ .write_cycle = 5,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 2,
+};
+
+static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
+ .ncs_read_setup = 0,
+ .nrd_setup = 2,
+ .ncs_write_setup = 0,
+ .nwe_setup = 2,
+
+ .ncs_read_pulse = 4,
+ .nrd_pulse = 4,
+ .ncs_write_pulse = 4,
+ .nwe_pulse = 4,
+
+ .read_cycle = 7,
+ .write_cycle = 7,
+
+ .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+ .tdf_cycles = 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
+ ek_nand_data.rdy_pin = AT91_PIN_PC13;
+ ek_nand_data.enable_pin = AT91_PIN_PC14;
+ }
+
+ /* configure chip-select 3 (NAND) */
+ if (machine_is_usb_a9g20())
+ sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+ else
+ sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+
+ at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* USER PUSH BUTTON */
+ .code = KEY_ENTER,
+ .gpio = AT91_PIN_PB10,
+ .active_low = 1,
+ .desc = "user_pb",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
+ at91_set_deglitch(AT91_PIN_PB10, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+ { /* user_led (green) */
+ .name = "user_led",
+ .gpio = AT91_PIN_PB21,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rv3029c2", 0x56),
+ },
+};
+
+static void __init ek_add_device_leds(void)
+{
+ if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+ ek_leds[0].active_low = 0;
+
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ ek_add_device_udc();
+ /* SPI */
+ ek_add_device_spi();
+ /* Ethernet */
+ ek_add_device_eth();
+ /* NAND */
+ ek_add_device_nand();
+ /* Push Buttons */
+ ek_add_device_buttons();
+ /* LEDs */
+ ek_add_device_leds();
+
+ if (machine_is_usb_a9g20()) {
+ /* I2C */
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ } else {
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* shutdown controller, wakeup button (5 msec low) */
+ at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+ | AT91_SHDW_WKMODE0_LOW
+ | AT91_SHDW_RTTWKEN);
+ }
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+ /* Maintainer: calao-systems */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+ /* Maintainer: calao-systems */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
+ /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
+ .timer = &at91sam926x_timer,
+ .map_io = at91_map_io,
+ .init_early = ek_init_early,
+ .init_irq = at91_init_irq_default,
+ .init_machine = ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index ed544a0..d07767f 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,11 @@
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
u8 vbus_pin[2]; /* port power-control pin */
+ u8 vbus_pin_inverted;
+ u8 overcurrent_supported;
+ u8 overcurrent_pin[2];
+ u8 overcurrent_status[2];
+ u8 overcurrent_changed[2];
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..85820ad 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -64,7 +64,12 @@
#elif defined(CONFIG_ARCH_AT91SAM9G20)
+#if defined(CONFIG_MACH_USB_A9G20)
+#define AT91SAM9_MASTER_CLOCK 133000000
+#else
#define AT91SAM9_MASTER_CLOCK 132096000
+#endif
+
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index c0deaca..32d837d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -192,6 +192,16 @@
endchoice
+config DA850_WL12XX
+ bool "AM18x wl1271 daughter board"
+ depends on MACH_DAVINCI_DA850_EVM
+ help
+ The wl1271 daughter card for AM18x EVMs is a combo wireless
+ connectivity add-on card, based on the LS Research TiWi module with
+ Texas Instruments' wl1271 solution.
+ Say Y if you want to use a wl1271 expansion card connected to the
+ AM18x EVM.
+
config GPIO_PCA953X
default MACH_DAVINCI_DA850_EVM
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6e41cb5..ec21663 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -31,6 +31,8 @@
#include <linux/input/tps6507x-ts.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#include <linux/delay.h>
+#include <linux/wl12xx.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -49,6 +51,9 @@
#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
+#define DA850_WLAN_EN GPIO_TO_PIN(6, 9)
+#define DA850_WLAN_IRQ GPIO_TO_PIN(6, 10)
+
#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
static struct mtd_partition da850evm_spiflash_part[] = {
@@ -1143,6 +1148,110 @@
static __init int da850_evm_init_cpufreq(void) { return 0; }
#endif
+#ifdef CONFIG_DA850_WL12XX
+
+static void wl12xx_set_power(int index, bool power_on)
+{
+ static bool power_state;
+
+ pr_debug("Powering %s wl12xx", power_on ? "on" : "off");
+
+ if (power_on == power_state)
+ return;
+ power_state = power_on;
+
+ if (power_on) {
+ /* Power up sequence required for wl127x devices */
+ gpio_set_value(DA850_WLAN_EN, 1);
+ usleep_range(15000, 15000);
+ gpio_set_value(DA850_WLAN_EN, 0);
+ usleep_range(1000, 1000);
+ gpio_set_value(DA850_WLAN_EN, 1);
+ msleep(70);
+ } else {
+ gpio_set_value(DA850_WLAN_EN, 0);
+ }
+}
+
+static struct davinci_mmc_config da850_wl12xx_mmc_config = {
+ .set_power = wl12xx_set_power,
+ .wires = 4,
+ .max_freq = 25000000,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_NONREMOVABLE |
+ MMC_CAP_POWER_OFF_CARD,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+static const short da850_wl12xx_pins[] __initconst = {
+ DA850_MMCSD1_DAT_0, DA850_MMCSD1_DAT_1, DA850_MMCSD1_DAT_2,
+ DA850_MMCSD1_DAT_3, DA850_MMCSD1_CLK, DA850_MMCSD1_CMD,
+ DA850_GPIO6_9, DA850_GPIO6_10,
+ -1
+};
+
+static struct wl12xx_platform_data da850_wl12xx_wlan_data __initdata = {
+ .irq = -1,
+ .board_ref_clock = WL12XX_REFCLOCK_38,
+ .platform_quirks = WL12XX_PLATFORM_QUIRK_EDGE_IRQ,
+};
+
+static __init int da850_wl12xx_init(void)
+{
+ int ret;
+
+ ret = davinci_cfg_reg_list(da850_wl12xx_pins);
+ if (ret) {
+ pr_err("wl12xx/mmc mux setup failed: %d\n", ret);
+ goto exit;
+ }
+
+ ret = da850_register_mmcsd1(&da850_wl12xx_mmc_config);
+ if (ret) {
+ pr_err("wl12xx/mmc registration failed: %d\n", ret);
+ goto exit;
+ }
+
+ ret = gpio_request_one(DA850_WLAN_EN, GPIOF_OUT_INIT_LOW, "wl12xx_en");
+ if (ret) {
+ pr_err("Could not request wl12xx enable gpio: %d\n", ret);
+ goto exit;
+ }
+
+ ret = gpio_request_one(DA850_WLAN_IRQ, GPIOF_IN, "wl12xx_irq");
+ if (ret) {
+ pr_err("Could not request wl12xx irq gpio: %d\n", ret);
+ goto free_wlan_en;
+ }
+
+ da850_wl12xx_wlan_data.irq = gpio_to_irq(DA850_WLAN_IRQ);
+
+ ret = wl12xx_set_platform_data(&da850_wl12xx_wlan_data);
+ if (ret) {
+ pr_err("Could not set wl12xx data: %d\n", ret);
+ goto free_wlan_irq;
+ }
+
+ return 0;
+
+free_wlan_irq:
+ gpio_free(DA850_WLAN_IRQ);
+
+free_wlan_en:
+ gpio_free(DA850_WLAN_EN);
+
+exit:
+ return ret;
+}
+
+#else /* CONFIG_DA850_WL12XX */
+
+static __init int da850_wl12xx_init(void)
+{
+ return 0;
+}
+
+#endif /* CONFIG_DA850_WL12XX */
+
#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000)
static __init void da850_evm_init(void)
@@ -1197,6 +1306,11 @@
if (ret)
pr_warning("da850_evm_init: mmcsd0 registration failed:"
" %d\n", ret);
+
+ ret = da850_wl12xx_init();
+ if (ret)
+ pr_warning("da850_evm_init: wl12xx initialization"
+ " failed: %d\n", ret);
}
davinci_serial_init(&da850_evm_uart_config);
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 4aae015..b047f87 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -536,6 +536,13 @@
MUX_CFG(DA850, MMCSD0_DAT_3, 10, 20, 15, 2, false)
MUX_CFG(DA850, MMCSD0_CLK, 10, 0, 15, 2, false)
MUX_CFG(DA850, MMCSD0_CMD, 10, 4, 15, 2, false)
+ /* MMC/SD1 function */
+ MUX_CFG(DA850, MMCSD1_DAT_0, 18, 8, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_DAT_1, 19, 16, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_DAT_2, 19, 12, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_DAT_3, 19, 8, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_CLK, 18, 12, 15, 2, false)
+ MUX_CFG(DA850, MMCSD1_CMD, 18, 16, 15, 2, false)
/* EMIF2.5/EMIFA function */
MUX_CFG(DA850, EMA_D_7, 9, 0, 15, 1, false)
MUX_CFG(DA850, EMA_D_6, 9, 4, 15, 1, false)
@@ -594,6 +601,8 @@
MUX_CFG(DA850, GPIO3_13, 7, 8, 15, 8, false)
MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false)
+ MUX_CFG(DA850, GPIO6_9, 13, 24, 15, 8, false)
+ MUX_CFG(DA850, GPIO6_10, 13, 20, 15, 8, false)
MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false)
MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false)
#endif
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 2f7e719..68def71 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -136,6 +136,7 @@
.n_cc = 1,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
@@ -151,6 +152,7 @@
.n_cc = 1,
.queue_tc_mapping = da8xx_queue_tc_mapping,
.queue_priority_mapping = da8xx_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
},
{
.n_channel = 32,
@@ -160,6 +162,7 @@
.n_cc = 1,
.queue_tc_mapping = da850_queue_tc_mapping,
.queue_priority_mapping = da850_queue_priority_mapping,
+ .default_queue = EVENTQ_0,
},
};
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 6162cae..29b17f7 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -80,6 +80,7 @@
.n_cc = 1,
.queue_tc_mapping = edma_tc_mapping,
.queue_priority_mapping = edma_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index c143f43..fe520d4 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -591,6 +591,7 @@
.n_cc = 1,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 9a27466..3470983 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -514,6 +514,7 @@
.n_cc = 1,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 03e5f49..0b68ed5 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -555,6 +555,7 @@
.n_cc = 1,
.queue_tc_mapping = dm646x_queue_tc_mapping,
.queue_priority_mapping = dm646x_queue_priority_mapping,
+ .default_queue = EVENTQ_1,
};
static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index 6b96698..da90103 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -1435,12 +1435,11 @@
goto fail1;
}
- edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+ edma_cc[j] = kzalloc(sizeof(struct edma), GFP_KERNEL);
if (!edma_cc[j]) {
status = -ENOMEM;
goto fail1;
}
- memset(edma_cc[j], 0, sizeof(struct edma));
edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel,
EDMA_MAX_DMACH);
@@ -1450,8 +1449,6 @@
EDMA_MAX_CC);
edma_cc[j]->default_queue = info[j]->default_queue;
- if (!edma_cc[j]->default_queue)
- edma_cc[j]->default_queue = EVENTQ_1;
dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
edmacc_regs_base[j]);
diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
index d4f1e96..5ba6b22 100644
--- a/arch/arm/mach-davinci/include/mach/mmc.h
+++ b/arch/arm/mach-davinci/include/mach/mmc.h
@@ -12,6 +12,9 @@
/* get_cd()/get_wp() may sleep */
int (*get_cd)(int module);
int (*get_ro)(int module);
+
+ void (*set_power)(int module, bool on);
+
/* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
u8 wires;
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index 5d4e0fe..a7e92fc 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -857,6 +857,14 @@
DA850_MMCSD0_CLK,
DA850_MMCSD0_CMD,
+ /* MMC/SD1 function */
+ DA850_MMCSD1_DAT_0,
+ DA850_MMCSD1_DAT_1,
+ DA850_MMCSD1_DAT_2,
+ DA850_MMCSD1_DAT_3,
+ DA850_MMCSD1_CLK,
+ DA850_MMCSD1_CMD,
+
/* EMIF2.5/EMIFA function */
DA850_EMA_D_7,
DA850_EMA_D_6,
@@ -916,6 +924,8 @@
DA850_GPIO3_13,
DA850_GPIO4_0,
DA850_GPIO4_1,
+ DA850_GPIO6_9,
+ DA850_GPIO6_10,
DA850_GPIO6_13,
DA850_RTC_ALARM,
};
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 3a08b18..97a2493 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -182,6 +182,13 @@
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
+config MACH_VISION_EP9307
+ bool "Support Vision Engraving Systems EP9307 SoM"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ help
+ Say 'Y' here if you want your kernel to support the
+ Vision Engraving Systems EP9307 SoM.
+
choice
prompt "Select a UART for early kernel messages"
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 3cedcf2..574209d 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -15,3 +15,4 @@
obj-$(CONFIG_MACH_SIM_ONE) += simone.o
obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 0000000..d96e4db
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE 0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+ {
+ .virtual = VISION_VIRT_BASE,
+ .pfn = __phys_to_pfn(VISION_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init vision_map_io(void)
+{
+ ep93xx_map_io();
+
+ iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+ .phy_id = 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+ int err;
+
+ err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+ dev_name(&pdev->dev));
+ if (err)
+ return err;
+
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+ EP93XX_SYSCON_DEVCFG_RASONP3 |
+ EP93XX_SYSCON_DEVCFG_EXVC);
+
+ return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+ gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+ if (blank_mode)
+ gpio_set_value(VISION_LCD_ENABLE, 0);
+ else
+ gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+ .setup = vision_lcd_setup,
+ .teardown = vision_lcd_teardown,
+ .blank = vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE (EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE (PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE (PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE (PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+ .gpio_base = PCA9539_74_GPIO_BASE,
+ .irq_base = EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+ .gpio_base = PCA9539_75_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+ .gpio_base = PCA9539_76_GPIO_BASE,
+ .irq_base = -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+ .gpio_base = PCA9539_77_GPIO_BASE,
+ .irq_base = -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+};
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ .irq = IRQ_EP93XX_EXT1,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x74),
+ .platform_data = &pca953x_74_gpio_data,
+ .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x75),
+ .platform_data = &pca953x_75_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x76),
+ .platform_data = &pca953x_76_gpio_data,
+ }, {
+ I2C_BOARD_INFO("pca9539", 0x77),
+ .platform_data = &pca953x_77_gpio_data,
+ },
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+#define VISION_SPI_FLASH_CS EP93XX_GPIO_LINE_EGPIO7
+
+static struct mtd_partition vision_spi_flash_partitions[] = {
+ {
+ .name = "SPI bootstrap",
+ .offset = 0,
+ .size = SZ_4K,
+ }, {
+ .name = "Bootstrap config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4K,
+ }, {
+ .name = "System config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+ .name = "SPI Flash",
+ .parts = vision_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+static int vision_spi_flash_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_FLASH_CS);
+}
+
+static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_FLASH_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
+ .setup = vision_spi_flash_hw_setup,
+ .cleanup = vision_spi_flash_hw_cleanup,
+ .cs_control = vision_spi_flash_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define VISION_SPI_MMC_CS EP93XX_GPIO_LINE_G(2)
+#define VISION_SPI_MMC_WP EP93XX_GPIO_LINE_F(0)
+#define VISION_SPI_MMC_CD EP93XX_GPIO_LINE_EGPIO15
+
+static struct gpio vision_spi_mmc_gpios[] = {
+ { VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
+ { VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
+};
+
+static int vision_spi_mmc_init(struct device *pdev,
+ irqreturn_t (*func)(int, void *), void *pdata)
+{
+ int err;
+
+ err = gpio_request_array(vision_spi_mmc_gpios,
+ ARRAY_SIZE(vision_spi_mmc_gpios));
+ if (err)
+ return err;
+
+ err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
+ if (err)
+ goto exit_err;
+
+ err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
+ IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
+ if (err)
+ goto exit_err;
+
+ return 0;
+
+exit_err:
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+ return err;
+
+}
+
+static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
+{
+ free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
+ gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+}
+
+static int vision_spi_mmc_get_ro(struct device *pdev)
+{
+ return !!gpio_get_value(VISION_SPI_MMC_WP);
+}
+
+static int vision_spi_mmc_get_cd(struct device *pdev)
+{
+ return !gpio_get_value(VISION_SPI_MMC_CD);
+}
+
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+ .init = vision_spi_mmc_init,
+ .exit = vision_spi_mmc_exit,
+ .get_ro = vision_spi_mmc_get_ro,
+ .get_cd = vision_spi_mmc_get_cd,
+ .detect_delay = 100,
+ .powerup_msecs = 100,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static int vision_spi_mmc_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
+ spi->modalias);
+}
+
+static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(VISION_SPI_MMC_CS);
+}
+
+static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(VISION_SPI_MMC_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
+ .setup = vision_spi_mmc_hw_setup,
+ .cleanup = vision_spi_mmc_hw_cleanup,
+ .cs_control = vision_spi_mmc_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+ {
+ .modalias = "sst25l",
+ .platform_data = &vision_spi_flash_data,
+ .controller_data = &vision_spi_flash_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ }, {
+ .modalias = "mmc_spi",
+ .platform_data = &vision_spi_mmc_data,
+ .controller_data = &vision_spi_mmc_hw,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+ .num_chipselect = ARRAY_SIZE(vision_spi_board_info),
+};
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+ ep93xx_init_devices();
+ ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+ ep93xx_register_eth(&vision_eth_data, 1);
+ ep93xx_register_fb(&ep93xxfb_info);
+ ep93xx_register_pwm(1, 0);
+
+ /*
+ * Request the gpio expander's interrupt gpio line now to prevent
+ * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+ */
+ if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+ "pca9539:74"))
+ pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+ ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+ ARRAY_SIZE(vision_i2c_info));
+ ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+ ARRAY_SIZE(vision_spi_board_info));
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .atag_offset = 0x100,
+ .map_io = vision_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = vision_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index fc1f92d..a652735 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -16,6 +16,16 @@
help
Enable EXYNOS4210 CPU support
+config SOC_EXYNOS4212
+ bool
+ help
+ Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+ bool
+ help
+ Enable EXYNOS4412 SoC support
+
config EXYNOS4_MCT
bool
default y
@@ -112,24 +122,11 @@
menu "EXYNOS4 Machines"
+comment "EXYNOS4210 Boards"
+
config MACH_SMDKC210
bool "SMDKC210"
- select CPU_EXYNOS4210
- select S5P_DEV_FIMD0
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select SAMSUNG_DEV_PWM
- select SAMSUNG_DEV_BACKLIGHT
- select EXYNOS4_DEV_PD
- select EXYNOS4_DEV_SYSMMU
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_SDHCI
+ select MACH_SMDKV310
help
Machine support for Samsung SMDKC210
@@ -219,6 +216,48 @@
help
Machine support for Samsung Mobile NURI Board.
+config MACH_ORIGEN
+ bool "ORIGEN"
+ select CPU_EXYNOS4210
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC2
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+ bool "SMDK4212"
+ select SOC_EXYNOS4212
+ select S3C_DEV_HSMMC2
+ select S3C_DEV_HSMMC3
+ select S3C_DEV_I2C1
+ select S3C_DEV_I2C3
+ select S3C_DEV_I2C7
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_KEYPAD
+ select SAMSUNG_DEV_PWM
+ select EXYNOS4_SETUP_I2C1
+ select EXYNOS4_SETUP_I2C3
+ select EXYNOS4_SETUP_I2C7
+ select EXYNOS4_SETUP_KEYPAD
+ select EXYNOS4_SETUP_SDHCI
+ help
+ Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+ bool "SMDK4412"
+ select SOC_EXYNOS4412
+ select MACH_SMDK4212
+ help
+ Machine support for Samsung SMDK4412
+
endmenu
comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7..c9b2e1f 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -12,8 +12,10 @@
# Core support for EXYNOS4 system
-obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
@@ -25,11 +27,15 @@
# machine support
-obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_MACH_NURI) += mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
# device support
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
new file mode 100644
index 0000000..b9d5ef6
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKSRC_LCD1),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_LCD1),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+ /* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_sata",
+ .id = -1,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_mout_corebus,
+ .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clksrc_mask_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ },
+};
+
+static struct clk init_clocks_off[] = {
+ {
+ .name = "sataphy",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "sata",
+ .id = -1,
+ .parent = &clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "fimd",
+ .devname = "exynos4-fb.1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+ return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+ .suspend = exynos4210_clock_suspend,
+ .resume = exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+ int ptr;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+ clk_mout_mpll.reg_src.shift = 8;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4210_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
new file mode 100644
index 0000000..77d5dec
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+ SAVE_ITEM(S5P_CLKSRC_IMAGE),
+ SAVE_ITEM(S5P_CLKDIV_IMAGE),
+ SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+ .sources = clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &clk_src_mpll_user,
+ .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+ /* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+ /* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+ return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+ .suspend = exynos4212_clock_suspend,
+ .resume = exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+ int ptr;
+
+ /* usbphy1 is removed */
+ clkset_group_list[4] = NULL;
+
+ /* mout_mpll_user is used */
+ clkset_group_list[6] = &clk_mout_mpll_user.clk;
+ clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+ clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+ clk_mout_mpll.reg_src.shift = 12;
+ clk_mout_mpll.reg_src.size = 1;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+ register_syscore_ops(&exynos4212_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 86964d2..0d59be3 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/syscore_ops.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
@@ -20,26 +21,93 @@
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/sysmmu.h>
+#include <mach/exynos4-clock.h>
-static struct clk clk_sclk_hdmi27m = {
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(S5P_CLKSRC_TOP0),
+ SAVE_ITEM(S5P_CLKSRC_TOP1),
+ SAVE_ITEM(S5P_CLKSRC_CAM),
+ SAVE_ITEM(S5P_CLKSRC_TV),
+ SAVE_ITEM(S5P_CLKSRC_MFC),
+ SAVE_ITEM(S5P_CLKSRC_G3D),
+ SAVE_ITEM(S5P_CLKSRC_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_CAM),
+ SAVE_ITEM(S5P_CLKDIV_TV),
+ SAVE_ITEM(S5P_CLKDIV_MFC),
+ SAVE_ITEM(S5P_CLKDIV_G3D),
+ SAVE_ITEM(S5P_CLKDIV_LCD0),
+ SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+ SAVE_ITEM(S5P_CLKDIV_FSYS0),
+ SAVE_ITEM(S5P_CLKDIV_FSYS1),
+ SAVE_ITEM(S5P_CLKDIV_FSYS2),
+ SAVE_ITEM(S5P_CLKDIV_FSYS3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL0),
+ SAVE_ITEM(S5P_CLKDIV_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV_PERIL2),
+ SAVE_ITEM(S5P_CLKDIV_PERIL3),
+ SAVE_ITEM(S5P_CLKDIV_PERIL4),
+ SAVE_ITEM(S5P_CLKDIV_PERIL5),
+ SAVE_ITEM(S5P_CLKDIV_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+ SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+ SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+ SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(S5P_CLKDIV2_RATIO),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+ SAVE_ITEM(S5P_CLKGATE_IP_TV),
+ SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+ SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+ SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+ SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+ SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+ SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+ SAVE_ITEM(S5P_CLKGATE_BLOCK),
+ SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+ SAVE_ITEM(S5P_CLKSRC_DMC),
+ SAVE_ITEM(S5P_CLKDIV_DMC0),
+ SAVE_ITEM(S5P_CLKDIV_DMC1),
+ SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+ SAVE_ITEM(S5P_CLKSRC_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU),
+ SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+ SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.rate = 27000000,
};
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
.name = "sclk_hdmiphy",
};
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
.name = "sclk_usbphy0",
.rate = 27000000,
};
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
.name = "sclk_usbphy1",
};
@@ -58,12 +126,7 @@
return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
}
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
}
@@ -103,12 +166,12 @@
return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
}
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
}
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
}
@@ -133,7 +196,7 @@
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
};
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
.clk = {
.name = "sclk_apll",
.parent = &clk_mout_apll.clk,
@@ -141,7 +204,7 @@
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
};
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
},
@@ -149,12 +212,13 @@
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
};
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
},
.sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+ /* reg_src will be added in each SoCs' clock */
};
static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +288,12 @@
/* Core list of CMU_CORE side */
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
.sources = clkset_corebus_list,
.nr_sources = ARRAY_SIZE(clkset_corebus_list),
};
@@ -284,12 +348,12 @@
/* Core list of CMU_TOP side */
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_sclk_apll.clk,
};
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
@@ -321,7 +385,7 @@
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
},
@@ -360,7 +424,7 @@
.nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
};
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
.clk = {
.name = "sclk_vpll",
},
@@ -410,16 +474,6 @@
.enable = exynos4_clk_ip_lcd0_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sataphy",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
.name = "hsmmc",
.devname = "s3c-sdhci.0",
.parent = &clk_aclk_133.clk,
@@ -449,11 +503,6 @@
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
}, {
- .name = "sata",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
.name = "pdma",
.devname = "s3c-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
@@ -673,7 +722,7 @@
}
};
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
@@ -685,7 +734,7 @@
[8] = &clk_sclk_vpll.clk,
};
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
.sources = clkset_group_list,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
@@ -967,25 +1016,6 @@
.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
.name = "sclk_spi",
.devname = "s3c64xx-spi.0",
.enable = exynos4_clksrc_mask_peril1_ctrl,
@@ -1114,7 +1144,13 @@
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
{
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+ else
+ return 0;
}
static struct clk_ops exynos4_fout_apll_ops = {
@@ -1124,10 +1160,10 @@
void __init_or_cpufreq exynos4_setup_clocks(void)
{
struct clk *xtal_clk;
- unsigned long apll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
@@ -1151,14 +1187,29 @@
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1), pll_4600);
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+ __raw_readl(S5P_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+ __raw_readl(S5P_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
clk_fout_apll.ops = &exynos4_fout_apll_ops;
clk_fout_mpll.rate = mpll;
@@ -1193,6 +1244,28 @@
/* Nothing here yet */
};
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
void __init exynos4_register_clocks(void)
{
int ptr;
@@ -1208,5 +1281,6 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ register_syscore_ops(&exynos4_clock_syscore_ops);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 746d6fc..a348434 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -32,6 +32,8 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
+unsigned int gic_bank_offset __read_mostly;
+
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -44,11 +46,6 @@
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSRAM,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -121,6 +118,24 @@
},
};
+static struct map_desc exynos4_iodesc0[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
static void exynos4_idle(void)
{
if (!need_resched())
@@ -143,6 +158,11 @@
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+ if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+ iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+ else
+ iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
/* initialize device information early */
exynos4_default_sdhci0();
exynos4_default_sdhci1();
@@ -170,24 +190,37 @@
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
+
+ if (soc_is_exynos4210())
+ exynos4210_register_clocks();
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4212_register_clocks();
+
exynos4_register_clocks();
exynos4_setup_clocks();
}
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
{
struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
gic_data->cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
+
+ gic_data->dist_base = S5P_VA_GIC_DIST +
+ (gic_bank_offset * smp_processor_id());
}
void __init exynos4_init_irq(void)
{
int irq;
- gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+ gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+ gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
@@ -223,7 +256,11 @@
{
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ if (soc_is_exynos4210())
+ __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
/* L2X0 Prefetch Control */
__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c
index 7490789..da70e7e 100644
--- a/arch/arm/mach-exynos4/hotplug.c
+++ b/arch/arm/mach-exynos4/hotplug.c
@@ -75,7 +75,7 @@
:
: "memory", "cc");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 006a4f4..f5e9fd8 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -17,12 +17,25 @@
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
+ mov \tmp, #0
+
+ mrc p15, 0, \base, c0, c0, 5
+ and \base, \base, #3
+ cmp \base, #0
+ beq 1f
+
+ ldr \tmp, =gic_bank_offset
+ ldr \tmp, [\tmp]
+ cmp \base, #1
+ beq 1f
+
+ cmp \base, #2
+ addeq \tmp, \tmp, \tmp
+ addne \tmp, \tmp, \tmp, LSL #1
+
+1: ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
- mrc p15, 0, \tmp, c0, c0, 5
- and \tmp, \tmp, #3
- cmp \tmp, #1
- addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+ add \base, \base, \tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
new file mode 100644
index 0000000..a07fcbf
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8..2d3f6bc 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,6 +19,8 @@
#define IRQ_PPI(x) S5P_IRQ(x+16)
+#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+
/* SPI: Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296d..9f97eb8 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
#include <plat/map-s5p.h>
-#define EXYNOS4_PA_SYSRAM 0x02020000
+#define EXYNOS4_PA_SYSRAM0 0x02025000
+#define EXYNOS4_PA_SYSRAM1 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
@@ -61,7 +62,6 @@
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET 0x8000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index d493fdb..6c37ebe 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -13,6 +13,7 @@
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+#include <plat/cpu.h>
#include <mach/map.h>
#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
+#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
-#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
-
#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
@@ -85,13 +83,20 @@
#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C930) : \
+ S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x0C960) : \
+ S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
@@ -102,11 +107,17 @@
#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14004) : \
+ S5P_CLKREG(0x10008))
#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0 S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1 S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x14108) : \
+ S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
+ S5P_CLKREG(0x1410C) : \
+ S5P_CLKREG(0x1010C))
#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
@@ -183,6 +194,13 @@
#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
index ca9c843..80dd02a 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -31,8 +31,9 @@
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK (0xffffff00)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644
index 0000000..b5f6f38
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ * http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = ORIGEN_UCON_DEFAULT,
+ .ulcon = ORIGEN_ULCON_DEFAULT,
+ .ufcon = ORIGEN_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = EXYNOS4_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+ platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+ /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = origen_map_io,
+ .init_machine = origen_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c
new file mode 100644
index 0000000..fcf2e0e
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4x12.c
@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDK4X12_UCON_DEFAULT,
+ .ulcon = SMDK4X12_ULCON_DEFAULT,
+ .ufcon = SMDK4X12_UFCON_DEFAULT,
+ },
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+ REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+ REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+ REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+ .constraints = {
+ .name = "VDD_ARM_SMDK4X12",
+ .min_uV = 925000,
+ .max_uV = 1350000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+ .constraints = {
+ .name = "VDD_INT_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+ .constraints = {
+ .name = "VDD_G3D_SMDK4X12",
+ .min_uV = 950000,
+ .max_uV = 1150000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .state_mem = {
+ .disabled = 1,
+ },
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+ { MAX8997_BUCK1, &max8997_buck1_data },
+ { MAX8997_BUCK2, &max8997_buck2_data },
+ { MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+ .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
+ .regulators = smdk4x12_max8997_regulators,
+
+ .buck1_voltage[0] = 1100000, /* 1.1V */
+ .buck1_voltage[1] = 1100000, /* 1.1V */
+ .buck1_voltage[2] = 1100000, /* 1.1V */
+ .buck1_voltage[3] = 1100000, /* 1.1V */
+ .buck1_voltage[4] = 1100000, /* 1.1V */
+ .buck1_voltage[5] = 1100000, /* 1.1V */
+ .buck1_voltage[6] = 1000000, /* 1.0V */
+ .buck1_voltage[7] = 950000, /* 0.95V */
+
+ .buck2_voltage[0] = 1100000, /* 1.1V */
+ .buck2_voltage[1] = 1000000, /* 1.0V */
+ .buck2_voltage[2] = 950000, /* 0.95V */
+ .buck2_voltage[3] = 900000, /* 0.9V */
+ .buck2_voltage[4] = 1100000, /* 1.1V */
+ .buck2_voltage[5] = 1000000, /* 1.0V */
+ .buck2_voltage[6] = 950000, /* 0.95V */
+ .buck2_voltage[7] = 900000, /* 0.9V */
+
+ .buck5_voltage[0] = 1100000, /* 1.1V */
+ .buck5_voltage[1] = 1100000, /* 1.1V */
+ .buck5_voltage[2] = 1100000, /* 1.1V */
+ .buck5_voltage[3] = 1100000, /* 1.1V */
+ .buck5_voltage[4] = 1100000, /* 1.1V */
+ .buck5_voltage[5] = 1100000, /* 1.1V */
+ .buck5_voltage[6] = 1100000, /* 1.1V */
+ .buck5_voltage[7] = 1100000, /* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+ {
+ I2C_BOARD_INFO("max8997", 0x66),
+ .platform_data = &smdk4x12_max8997_pdata,
+ }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+ /* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+ .no = EXYNOS4_GPD0(1),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+ .pwm_id = 1,
+ .pwm_period_ns = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+ /* KEY(row, col, keycode) */
+ KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+ KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+ .keymap = smdk4x12_keymap,
+ .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+ .keymap_data = &smdk4x12_keymap_data,
+ .rows = 2,
+ .cols = 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_i2c3,
+ &s3c_device_i2c7,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+ clk_xusbxti.rate = 24000000;
+
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(clk_xusbxti.rate);
+ s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ i2c_register_board_info(0, smdk4x12_i2c_devs0,
+ ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, smdk4x12_i2c_devs1,
+ ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+ s3c_i2c3_set_platdata(NULL);
+ i2c_register_board_info(3, smdk4x12_i2c_devs3,
+ ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+ s3c_i2c7_set_platdata(NULL);
+ i2c_register_board_info(7, smdk4x12_i2c_devs7,
+ ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+ samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+ samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+ s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+ platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdk4x12_map_io,
+ .init_machine = smdk4x12_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
deleted file mode 100644
index b24ddd7..0000000
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKC210_UCON_DEFAULT,
- .ulcon = SMDKC210_ULCON_DEFAULT,
- .ufcon = SMDKC210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
- .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
- gpio_direction_output(EXYNOS4_GPX0(6), 1);
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
- .win_mode = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
- .win[0] = &smdkc210_fb_win0,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
- [0] = {
- .start = EXYNOS4_PA_SROM_BANK(1),
- .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_EINT(5),
- .end = IRQ_EINT(5),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
- },
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
- .resource = smdkc210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &exynos4_device_pd[PD_MFC],
- &exynos4_device_pd[PD_G3D],
- &exynos4_device_pd[PD_LCD0],
- &exynos4_device_pd[PD_LCD1],
- &exynos4_device_pd[PD_CAM],
- &exynos4_device_pd[PD_TV],
- &exynos4_device_pd[PD_GPS],
- &exynos4_device_sysmmu,
- &samsung_asoc_dma,
- &s5p_device_fimd0,
- &smdkc210_lcd_lte480wv,
- &smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
- s3c24xx_init_clocks(24000000);
- s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkc210_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
- samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
- s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
- platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .init_irq = exynos4_init_irq,
- .map_io = smdkc210_map_io,
- .init_machine = smdkc210_machine_init,
- .timer = &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index d90fcdd..2c1a076 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -9,7 +9,9 @@
*/
#include <linux/serial_core.h>
+#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/lcd.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <video/platform_lcd.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/fb.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/iic.h>
@@ -112,6 +117,67 @@
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ /* fire nRESET on power up */
+ gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+ gpio_direction_output(EXYNOS4_GPX0(6), 1);
+ mdelay(100);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 0);
+ mdelay(10);
+
+ gpio_set_value(EXYNOS4_GPX0(6), 1);
+ mdelay(10);
+
+ gpio_free(EXYNOS4_GPX0(6));
+ } else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+ gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+ gpio_free(EXYNOS4_GPD0(1));
+#endif
+ }
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+ .set_power = lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s5p_device_fimd0.dev,
+ .dev.platform_data = &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+ .win_mode = {
+ .left_margin = 13,
+ .right_margin = 8,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+ .win[0] = &smdkv310_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
+};
+
static struct resource smdkv310_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@
&exynos4_device_sysmmu,
&samsung_asoc_dma,
&samsung_asoc_idma,
+ &s5p_device_fimd0,
+ &smdkv310_lcd_lte480wv,
&smdkv310_smsc911x,
&exynos4_device_ahci,
};
@@ -248,6 +316,7 @@
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+ s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
@@ -261,3 +330,12 @@
.init_machine = smdkv310_machine_init,
.timer = &exynos4_timer,
MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+ .init_irq = exynos4_init_irq,
+ .map_io = smdkv310_map_io,
+ .init_machine = smdkv310_machine_init,
+ .timer = &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index 582b874..f191608 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -20,19 +20,31 @@
#include <linux/delay.h>
#include <linux/percpu.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
#include <mach/map.h>
+#include <mach/irqs.h>
#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+enum {
+ MCT_INT_SPI,
+ MCT_INT_PPI
+};
+
static unsigned long clk_cnt_per_tick;
static unsigned long clk_rate;
+static unsigned int mct_int_type;
struct mct_clock_event_device {
struct clock_event_device *evt;
void __iomem *base;
+ char name[10];
};
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
static void exynos4_mct_write(unsigned int value, void *addr)
{
@@ -42,57 +54,53 @@
__raw_writel(value, addr);
- switch ((u32) addr) {
- case (u32) EXYNOS4_MCT_G_TCON:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 16; /* G_TCON write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_L:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 0; /* G_COMP0_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_U:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 1; /* G_COMP0_U write status */
- break;
- case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
- stat_addr = EXYNOS4_MCT_G_WSTAT;
- mask = 1 << 2; /* G_COMP0_ADD_INCR write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_L:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 0; /* G_CNT_L write status */
- break;
- case (u32) EXYNOS4_MCT_G_CNT_U:
- stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
- mask = 1 << 1; /* G_CNT_U write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L0_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 3; /* L1_TCON write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L0_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 0; /* L1_TCNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L0_ICNTB write status */
- break;
- case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
- stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
- mask = 1 << 1; /* L1_ICNTB write status */
- break;
- default:
- return;
+ if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+ u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+ switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+ case (u32) MCT_L_TCON_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 3; /* L_TCON write status */
+ break;
+ case (u32) MCT_L_ICNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 1; /* L_ICNTB write status */
+ break;
+ case (u32) MCT_L_TCNTB_OFFSET:
+ stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+ mask = 1 << 0; /* L_TCNTB write status */
+ break;
+ default:
+ return;
+ }
+ } else {
+ switch ((u32) addr) {
+ case (u32) EXYNOS4_MCT_G_TCON:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 16; /* G_TCON write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_L:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 0; /* G_COMP0_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_U:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 1; /* G_COMP0_U write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+ stat_addr = EXYNOS4_MCT_G_WSTAT;
+ mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_L:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 0; /* G_CNT_L write status */
+ break;
+ case (u32) EXYNOS4_MCT_G_CNT_U:
+ stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+ mask = 1 << 1; /* G_CNT_U write status */
+ break;
+ default:
+ return;
+ }
}
/* Wait maximum 1 ms until written values are applied */
@@ -321,9 +329,8 @@
}
}
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
{
- struct mct_clock_event_device *mevt = dev_id;
struct clock_event_device *evt = mevt->evt;
/*
@@ -335,7 +342,20 @@
exynos4_mct_tick_stop(mevt);
/* Clear the MCT tick interrupt */
- exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+ exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+ struct mct_clock_event_device *mevt = dev_id;
+ struct clock_event_device *evt = mevt->evt;
+
+ exynos4_mct_tick_clear(mevt);
evt->event_handler(evt);
@@ -360,14 +380,10 @@
mct_tick[cpu].evt = evt;
- if (cpu == 0) {
- mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
- evt->name = "mct_tick0";
- } else {
- mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
- evt->name = "mct_tick1";
- }
+ mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+ sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
+ evt->name = mct_tick[cpu].name;
evt->cpumask = cpumask_of(cpu);
evt->set_next_event = exynos4_tick_set_next_event;
evt->set_mode = exynos4_tick_set_mode;
@@ -384,15 +400,19 @@
exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
- if (cpu == 0) {
- mct_tick0_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ if (mct_int_type == MCT_INT_SPI) {
+ if (cpu == 0) {
+ mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L0;
+ setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ } else {
+ mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L1;
+ setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ }
} else {
- mct_tick1_event_irq.dev_id = &mct_tick[cpu];
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ gic_enable_ppi(IRQ_MCT_LOCALTIMER);
}
}
@@ -422,6 +442,11 @@
static void __init exynos4_timer_init(void)
{
+ if (soc_is_exynos4210())
+ mct_int_type = MCT_INT_SPI;
+ else
+ mct_int_type = MCT_INT_PPI;
+
exynos4_timer_resources();
exynos4_clocksource_init();
exynos4_clockevent_init();
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 0c90896..0559540 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,13 @@
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
extern void exynos4_secondary_startup(void);
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM5 : S5P_VA_SYSRAM)
/*
* control for which core is the next to come out of the secondary
@@ -64,9 +68,9 @@
static void __cpuinit exynos4_gic_secondary_init(void)
{
void __iomem *dist_base = S5P_VA_GIC_DIST +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
void __iomem *cpu_base = S5P_VA_GIC_CPU +
- (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ (gic_bank_offset * smp_processor_id());
int i;
/*
@@ -128,7 +132,7 @@
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
- write_pen_release(cpu);
+ write_pen_release(cpu_logical_map(cpu));
if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
__raw_writel(S5P_CORE_LOCAL_PWR_EN,
@@ -216,5 +220,6 @@
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
}
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca94..62e4f43 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -41,7 +41,6 @@
{ .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
{ .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
{ .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
{ .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
{ .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
{ .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
@@ -49,6 +48,10 @@
{ .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
+static struct sleep_save exynos4210_set_clksrc[] = {
+ { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
+};
+
static struct sleep_save exynos4_epll_save[] = {
SAVE_ITEM(S5P_EPLL_CON0),
SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@
};
static struct sleep_save exynos4_core_save[] = {
- /* CMU side */
- SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_CLKSRC_TOP0),
- SAVE_ITEM(S5P_CLKSRC_TOP1),
- SAVE_ITEM(S5P_CLKSRC_CAM),
- SAVE_ITEM(S5P_CLKSRC_TV),
- SAVE_ITEM(S5P_CLKSRC_MFC),
- SAVE_ITEM(S5P_CLKSRC_G3D),
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKSRC_LCD0),
- SAVE_ITEM(S5P_CLKSRC_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_FSYS),
- SAVE_ITEM(S5P_CLKSRC_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_CAM),
- SAVE_ITEM(S5P_CLKDIV_TV),
- SAVE_ITEM(S5P_CLKDIV_MFC),
- SAVE_ITEM(S5P_CLKDIV_G3D),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_LCD0),
- SAVE_ITEM(S5P_CLKDIV_LCD1),
- SAVE_ITEM(S5P_CLKDIV_MAUDIO),
- SAVE_ITEM(S5P_CLKDIV_FSYS0),
- SAVE_ITEM(S5P_CLKDIV_FSYS1),
- SAVE_ITEM(S5P_CLKDIV_FSYS2),
- SAVE_ITEM(S5P_CLKDIV_FSYS3),
- SAVE_ITEM(S5P_CLKDIV_PERIL0),
- SAVE_ITEM(S5P_CLKDIV_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_PERIL2),
- SAVE_ITEM(S5P_CLKDIV_PERIL3),
- SAVE_ITEM(S5P_CLKDIV_PERIL4),
- SAVE_ITEM(S5P_CLKDIV_PERIL5),
- SAVE_ITEM(S5P_CLKDIV_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
- SAVE_ITEM(S5P_CLKSRC_MASK_TV),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(S5P_CLKDIV2_RATIO),
- SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
- SAVE_ITEM(S5P_CLKGATE_IP_CAM),
- SAVE_ITEM(S5P_CLKGATE_IP_TV),
- SAVE_ITEM(S5P_CLKGATE_IP_MFC),
- SAVE_ITEM(S5P_CLKGATE_IP_G3D),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
- SAVE_ITEM(S5P_CLKGATE_IP_GPS),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
- SAVE_ITEM(S5P_CLKGATE_BLOCK),
- SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
- SAVE_ITEM(S5P_CLKSRC_DMC),
- SAVE_ITEM(S5P_CLKDIV_DMC0),
- SAVE_ITEM(S5P_CLKDIV_DMC1),
- SAVE_ITEM(S5P_CLKGATE_IP_DMC),
- SAVE_ITEM(S5P_CLKSRC_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
- SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
- SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
/* GIC side */
SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@
s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
+ if (soc_is_exynos4210())
+ s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
}
static int exynos4_pm_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
new file mode 100644
index 0000000..986958a
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile
@@ -0,0 +1,6 @@
+obj-y := clock.o highbank.o system.o
+obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_PM_SLEEP) += pm.o
diff --git a/arch/arm/mach-highbank/Makefile.boot b/arch/arm/mach-highbank/Makefile.boot
new file mode 100644
index 0000000..dae9661
--- /dev/null
+++ b/arch/arm/mach-highbank/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c
new file mode 100644
index 0000000..c25a2ae
--- /dev/null
+++ b/arch/arm/mach-highbank/clock.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+
+struct clk {
+ unsigned long rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+
+static struct clk eclk = { .rate = 200000000 };
+static struct clk pclk = { .rate = 150000000 };
+
+static struct clk_lookup lookups[] = {
+ { .clk = &pclk, .con_id = "apb_pclk", },
+ { .clk = &pclk, .dev_id = "sp804", },
+ { .clk = &eclk, .dev_id = "ffe0e000.sdhci", },
+ { .clk = &pclk, .dev_id = "fff36000.serial", },
+};
+
+void __init highbank_clocks_init(void)
+{
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+}
diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h
new file mode 100644
index 0000000..7e33fc9
--- /dev/null
+++ b/arch/arm/mach-highbank/core.h
@@ -0,0 +1,9 @@
+extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
+extern void highbank_clocks_init(void);
+extern void __iomem *scu_base_addr;
+#ifdef CONFIG_DEBUG_HIGHBANK_UART
+extern void highbank_lluart_map_io(void);
+#else
+static inline void highbank_lluart_map_io(void) {}
+#endif
+
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
new file mode 100644
index 0000000..b82dcf0
--- /dev/null
+++ b/arch/arm/mach-highbank/highbank.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/unified.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void __iomem *sregs_base;
+
+#define HB_SCU_VIRT_BASE 0xfee00000
+void __iomem *scu_base_addr = ((void __iomem *)(HB_SCU_VIRT_BASE));
+
+static struct map_desc scu_io_desc __initdata = {
+ .virtual = HB_SCU_VIRT_BASE,
+ .pfn = 0, /* run-time */
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+static void __init highbank_scu_map_io(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_io_desc.pfn = __phys_to_pfn(base);
+ iotable_init(&scu_io_desc, 1);
+}
+
+static void __init highbank_map_io(void)
+{
+ highbank_scu_map_io();
+ highbank_lluart_map_io();
+}
+
+#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
+#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
+
+void highbank_set_cpu_jump(int cpu, void *jump_addr)
+{
+ writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+ __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
+ outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
+ HB_JUMP_TABLE_PHYS(cpu) + 15);
+}
+
+const static struct of_device_id irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {}
+};
+
+static void __init highbank_init_irq(void)
+{
+ of_irq_init(irq_match);
+ l2x0_of_init(0, ~0UL);
+}
+
+static void __init highbank_timer_init(void)
+{
+ int irq;
+ struct device_node *np;
+ void __iomem *timer_base;
+
+ /* Map system registers */
+ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+ sregs_base = of_iomap(np, 0);
+ WARN_ON(!sregs_base);
+
+ np = of_find_compatible_node(NULL, NULL, "arm,sp804");
+ timer_base = of_iomap(np, 0);
+ WARN_ON(!timer_base);
+ irq = irq_of_parse_and_map(np, 0);
+
+ highbank_clocks_init();
+
+ sp804_clocksource_init(timer_base + 0x20, "timer1");
+ sp804_clockevents_init(timer_base, irq, "timer0");
+}
+
+static struct sys_timer highbank_timer = {
+ .init = highbank_timer_init,
+};
+
+static void highbank_power_off(void)
+{
+ hignbank_set_pwr_shutdown();
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+ while (1)
+ cpu_do_idle();
+}
+
+static void __init highbank_init(void)
+{
+ pm_power_off = highbank_power_off;
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *highbank_match[] __initconst = {
+ "calxeda,highbank",
+ NULL,
+};
+
+DT_MACHINE_START(HIGHBANK, "Highbank")
+ .map_io = highbank_map_io,
+ .init_irq = highbank_init_irq,
+ .timer = &highbank_timer,
+ .init_machine = highbank_init,
+ .dt_compat = highbank_match,
+MACHINE_END
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
new file mode 100644
index 0000000..977cebb
--- /dev/null
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ flush_cache_all();
+
+ highbank_set_cpu_jump(cpu, secondary_startup);
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+
+ cpu_do_idle();
+
+ /* We should never return from idle */
+ panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * CPU0 should not be shut down via hotplug. cpu_idle can WFI
+ * or a proper shutdown or hibernate should be used.
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-highbank/include/mach/debug-macro.S b/arch/arm/mach-highbank/include/mach/debug-macro.S
new file mode 100644
index 0000000..cb57fe5
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ .macro addruart,rp,rv,tmp
+ movw \rv, #0x6000
+ movt \rv, #0xfee3
+ movw \rp, #0x6000
+ movt \rp, #0xfff3
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
new file mode 100644
index 0000000..73c1129
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/entry-macro.S
@@ -0,0 +1,7 @@
+#include <asm/hardware/entry-macro-gic.S>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-highbank/include/mach/gpio.h
similarity index 100%
rename from arch/um/include/asm/ftrace.h
rename to arch/arm/mach-highbank/include/mach/gpio.h
diff --git a/arch/arm/mach-highbank/include/mach/io.h b/arch/arm/mach-highbank/include/mach/io.h
new file mode 100644
index 0000000..70cfa3b
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/io.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define __io(a) ({ (void)(a); __typesafe_io(0); })
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/irqs.h b/arch/arm/mach-highbank/include/mach/irqs.h
new file mode 100644
index 0000000..9746aab
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/irqs.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define NR_IRQS 192
+
+#endif
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-highbank/include/mach/memory.h
similarity index 100%
copy from arch/um/include/asm/ftrace.h
copy to arch/arm/mach-highbank/include/mach/memory.h
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
new file mode 100644
index 0000000..7e81922
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+extern void arch_reset(char mode, const char *cmd);
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h
new file mode 100644
index 0000000..88dac7a
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/uncompress.h b/arch/arm/mach-highbank/include/mach/uncompress.h
new file mode 100644
index 0000000..bbe20e6
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/uncompress.h
@@ -0,0 +1,9 @@
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-highbank/include/mach/vmalloc.h b/arch/arm/mach-highbank/include/mach/vmalloc.h
new file mode 100644
index 0000000..1969e95
--- /dev/null
+++ b/arch/arm/mach-highbank/include/mach/vmalloc.h
@@ -0,0 +1 @@
+#define VMALLOC_END 0xFEE00000UL
diff --git a/arch/arm/mach-highbank/lluart.c b/arch/arm/mach-highbank/lluart.c
new file mode 100644
index 0000000..3715750
--- /dev/null
+++ b/arch/arm/mach-highbank/lluart.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+
+#define HB_DEBUG_LL_PHYS_BASE 0xfff36000
+#define HB_DEBUG_LL_VIRT_BASE 0xfee36000
+
+static struct map_desc lluart_io_desc __initdata = {
+ .virtual = HB_DEBUG_LL_VIRT_BASE,
+ .pfn = __phys_to_pfn(HB_DEBUG_LL_PHYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+void __init highbank_lluart_map_io(void)
+{
+ iotable_init(&lluart_io_desc, 1);
+}
diff --git a/arch/arm/mach-highbank/localtimer.c b/arch/arm/mach-highbank/localtimer.c
new file mode 100644
index 0000000..5a00e79
--- /dev/null
+++ b/arch/arm/mach-highbank/localtimer.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+ if (!twd_base) {
+ twd_base = of_iomap(np, 0);
+ WARN_ON(!twd_base);
+ }
+ evt->irq = irq_of_parse_and_map(np, 0);
+ twd_timer_setup(evt);
+ return 0;
+}
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
new file mode 100644
index 0000000..d01364c
--- /dev/null
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+
+#include "core.h"
+
+extern void secondary_startup(void);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ gic_raise_softirq(cpumask_of(cpu), 0);
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores;
+
+ ncores = scu_get_core_count(scu_base_addr);
+
+ /* sanity check */
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "highbank: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int i;
+
+ scu_enable(scu_base_addr);
+
+ /*
+ * Write the address of secondary startup into the jump table
+ * The cores are in wfi and wait until they receive a soft interrupt
+ * and a non-zero value to jump to. Then the secondary CPU branches
+ * to this address.
+ */
+ for (i = 1; i < max_cpus; i++)
+ highbank_set_cpu_jump(i, secondary_startup);
+}
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
new file mode 100644
index 0000000..33b3beb
--- /dev/null
+++ b/arch/arm/mach-highbank/pm.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+
+#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+static int highbank_suspend_finish(unsigned long val)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static int highbank_pm_enter(suspend_state_t state)
+{
+ hignbank_set_pwr_suspend();
+ highbank_set_cpu_jump(0, cpu_resume);
+
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ cpu_suspend(0, highbank_suspend_finish);
+
+ return 0;
+}
+
+static const struct platform_suspend_ops highbank_pm_ops = {
+ .enter = highbank_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init highbank_pm_init(void)
+{
+ suspend_set_ops(&highbank_pm_ops);
+ return 0;
+}
+module_init(highbank_pm_init);
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
new file mode 100644
index 0000000..0e91338
--- /dev/null
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _MACH_HIGHBANK__SYSREGS_H_
+#define _MACH_HIGHBANK__SYSREGS_H_
+
+#include <linux/io.h>
+
+extern void __iomem *sregs_base;
+
+#define HB_SREG_A9_PWR_REQ 0xf00
+#define HB_SREG_A9_BOOT_STAT 0xf04
+#define HB_SREG_A9_BOOT_DATA 0xf08
+
+#define HB_PWR_SUSPEND 0
+#define HB_PWR_SOFT_RESET 1
+#define HB_PWR_HARD_RESET 2
+#define HB_PWR_SHUTDOWN 3
+
+static inline void hignbank_set_pwr_suspend(void)
+{
+ writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_shutdown(void)
+{
+ writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_soft_reset(void)
+{
+ writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+static inline void hignbank_set_pwr_hard_reset(void)
+{
+ writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
+}
+
+#endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
new file mode 100644
index 0000000..53f0c4c
--- /dev/null
+++ b/arch/arm/mach-highbank/system.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+#include <asm/proc-fns.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void arch_reset(char mode, const char *cmd)
+{
+ if (mode == 'h')
+ hignbank_set_pwr_hard_reset();
+ else
+ hignbank_set_pwr_soft_reset();
+
+ scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
+ cpu_do_idle();
+}
+
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0519dd7..5f7f9c2 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,10 +1,32 @@
config IMX_HAVE_DMA_V1
bool
+
+config HAVE_IMX_GPC
+ bool
+
+config HAVE_IMX_MMDC
+ bool
+
+config HAVE_IMX_SRC
+ bool
+
#
# ARCH_MX31 and ARCH_MX35 are left for compatibility
# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
# more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX1
+ bool
+
+config MACH_MX21
+ bool
+
+config ARCH_MX25
+ bool
+
+config MACH_MX27
+ bool
+
config ARCH_MX31
bool
@@ -13,6 +35,7 @@
config SOC_IMX1
bool
+ select ARCH_MX1
select CPU_ARM920T
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
@@ -20,6 +43,7 @@
config SOC_IMX21
bool
+ select MACH_MX21
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
@@ -28,6 +52,7 @@
config SOC_IMX25
bool
+ select ARCH_MX25
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V2
select ARCH_MXC_IOMUX_V3
@@ -35,6 +60,7 @@
config SOC_IMX27
bool
+ select MACH_MX27
select CPU_ARM926T
select ARCH_MXC_AUDMUX_V1
select IMX_HAVE_DMA_V1
@@ -48,6 +74,7 @@
select ARCH_MXC_AUDMUX_V2
select ARCH_MX31
select MXC_AVIC
+ select SMP_ON_UP if SMP
config SOC_IMX35
bool
@@ -57,9 +84,10 @@
select HAVE_EPIT
select ARCH_MX35
select MXC_AVIC
+ select SMP_ON_UP if SMP
-if ARCH_MX1
+if ARCH_IMX_V4_V5
comment "MX1 platforms:"
config MACH_MXLADS
@@ -87,30 +115,6 @@
help
Say Yes here if you are using the Armadeus APF9328 development board
-endif
-
-if ARCH_MX2
-
-choice
- prompt "CPUs:"
- default MACH_MX21
-
-config MACH_MX21
- bool "i.MX21 support"
- help
- This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
- bool "i.MX27 support"
- help
- This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-endif
-
-if MACH_MX21
-
comment "MX21 platforms:"
config MACH_MX21ADS
@@ -124,15 +128,12 @@
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
-endif
-
-if ARCH_MX25
-
comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select SOC_IMX25
+ select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -174,10 +175,6 @@
endchoice
-endif
-
-if MACH_MX27
-
comment "MX27 platforms:"
config MACH_MX27ADS
@@ -356,7 +353,7 @@
endif
-if ARCH_MX3
+if ARCH_IMX_V6_V7
comment "MX31 platforms:"
@@ -449,6 +446,7 @@
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
@@ -485,6 +483,7 @@
bool "Support Dave/DENX QongEVB-LITE platform"
select SOC_IMX31
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX2_WDT
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
@@ -605,4 +604,20 @@
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+comment "i.MX6 family:"
+
+config SOC_IMX6Q
+ bool "i.MX6 Quad support"
+ select ARM_GIC
+ select CACHE_L2X0
+ select CPU_V7
+ select HAVE_ARM_SCU
+ select HAVE_IMX_GPC
+ select HAVE_IMX_MMDC
+ select HAVE_IMX_SRC
+ select USE_OF
+
+ help
+ This enables support for Freescale i.MX6 Quad processor.
+
endif
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e9eb36d..aba7321 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,16 +1,15 @@
obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
-obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
-obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
-obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
-obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -61,3 +60,14 @@
obj-$(CONFIG_MACH_EUKREA_CPUIMX35) += mach-cpuimx35.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
+
+obj-$(CONFIG_DEBUG_LL) += lluart.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
+obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
+obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+obj-$(CONFIG_CPU_V7) += head-v7.o
+AFLAGS_head-v7.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index dbe6120..22d8588 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -17,3 +17,7 @@
zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
+params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
+initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c
deleted file mode 100644
index 69d1322..0000000
--- a/arch/arm/mach-imx/cache-l2x0.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/hardware.h>
-
-static int mxc_init_l2x0(void)
-{
- void __iomem *l2x0_base;
- void __iomem *clkctl_base;
-
- if (!cpu_is_mx31() && !cpu_is_mx35())
- return 0;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
- clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
- if (clkctl_base != NULL) {
- writel(0x00000515, clkctl_base + L2_MEM_VAL);
- iounmap(clkctl_base);
- } else {
- pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
- }
-
- l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (IS_ERR(l2x0_base)) {
- printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
- PTR_ERR(l2x0_base));
- return 0;
- }
-
- l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
- return 0;
-}
-arch_initcall(mxc_init_l2x0);
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
index e63e235..b0fec74c 100644
--- a/arch/arm/mach-imx/clock-imx25.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -263,6 +263,7 @@
DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk);
DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(iim_clk, 0, CCM_CGCR1, 26, NULL, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
@@ -310,6 +311,7 @@
_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
/* i.mx25 has the i.mx35 type sdma */
_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
+ _REGISTER_CLOCK(NULL, "iim", iim_clk)
};
int __init mx25_clocks_init(void)
@@ -334,6 +336,10 @@
/* Clock source for gpt is ahb_div */
__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
+ clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX25", mx25_revision());
+ clk_disable(&iim_clk);
+
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 6912b82..88fe00a 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -583,7 +583,7 @@
DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(ata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(pata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk);
@@ -666,7 +666,7 @@
_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
@@ -751,6 +751,8 @@
clk_enable(&gpio_clk);
clk_enable(&emi_clk);
clk_enable(&iim_clk);
+ imx_print_silicon_rev("i.MX27", mx27_revision());
+ clk_disable(&iim_clk);
#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
clk_enable(&uart1_clk);
diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
index d973770..988a281 100644
--- a/arch/arm/mach-imx/clock-imx31.c
+++ b/arch/arm/mach-imx/clock-imx31.c
@@ -476,7 +476,7 @@
DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
@@ -562,7 +562,7 @@
_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK(NULL, "firi", firi_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
_REGISTER_CLOCK(NULL, "rng", rng_clk)
_REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
@@ -611,11 +611,11 @@
clk_enable(&gpt_clk);
clk_enable(&emi_clk);
clk_enable(&iim_clk);
+ mx31_revision();
+ clk_disable(&iim_clk);
clk_enable(&serial_pll_clk);
- mx31_read_cpu_rev();
-
if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
index 88b62a0..8116f11 100644
--- a/arch/arm/mach-imx/clock-imx35.c
+++ b/arch/arm/mach-imx/clock-imx35.c
@@ -354,7 +354,7 @@
}
DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL);
-DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
+DEFINE_CLOCK(pata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */
DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL);
DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL);
@@ -447,7 +447,7 @@
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
- _REGISTER_CLOCK(NULL, "ata", ata_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
@@ -537,7 +537,8 @@
__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
clk_enable(&iim_clk);
- mx35_read_cpu_rev();
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+ clk_disable(&iim_clk);
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
new file mode 100644
index 0000000..e0b926d
--- /dev/null
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -0,0 +1,2012 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/div64.h>
+#include <asm/mach/map.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#define PLL_BASE IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
+#define PLL1_SYS (PLL_BASE + 0x000)
+#define PLL2_BUS (PLL_BASE + 0x030)
+#define PLL3_USB_OTG (PLL_BASE + 0x010)
+#define PLL4_AUDIO (PLL_BASE + 0x070)
+#define PLL5_VIDEO (PLL_BASE + 0x0a0)
+#define PLL6_MLB (PLL_BASE + 0x0d0)
+#define PLL7_USB_HOST (PLL_BASE + 0x020)
+#define PLL8_ENET (PLL_BASE + 0x0e0)
+#define PFD_480 (PLL_BASE + 0x0f0)
+#define PFD_528 (PLL_BASE + 0x100)
+#define PLL_NUM_OFFSET 0x010
+#define PLL_DENOM_OFFSET 0x020
+
+#define PFD0 7
+#define PFD1 15
+#define PFD2 23
+#define PFD3 31
+#define PFD_FRAC_MASK 0x3f
+
+#define BM_PLL_BYPASS (0x1 << 16)
+#define BM_PLL_ENABLE (0x1 << 13)
+#define BM_PLL_POWER_DOWN (0x1 << 12)
+#define BM_PLL_LOCK (0x1 << 31)
+#define BP_PLL_SYS_DIV_SELECT 0
+#define BM_PLL_SYS_DIV_SELECT (0x7f << 0)
+#define BP_PLL_BUS_DIV_SELECT 0
+#define BM_PLL_BUS_DIV_SELECT (0x1 << 0)
+#define BP_PLL_USB_DIV_SELECT 0
+#define BM_PLL_USB_DIV_SELECT (0x3 << 0)
+#define BP_PLL_AV_DIV_SELECT 0
+#define BM_PLL_AV_DIV_SELECT (0x7f << 0)
+#define BP_PLL_ENET_DIV_SELECT 0
+#define BM_PLL_ENET_DIV_SELECT (0x3 << 0)
+#define BM_PLL_ENET_EN_PCIE (0x1 << 19)
+#define BM_PLL_ENET_EN_SATA (0x1 << 20)
+
+#define CCM_BASE IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
+#define CCR (CCM_BASE + 0x00)
+#define CCDR (CCM_BASE + 0x04)
+#define CSR (CCM_BASE + 0x08)
+#define CCSR (CCM_BASE + 0x0c)
+#define CACRR (CCM_BASE + 0x10)
+#define CBCDR (CCM_BASE + 0x14)
+#define CBCMR (CCM_BASE + 0x18)
+#define CSCMR1 (CCM_BASE + 0x1c)
+#define CSCMR2 (CCM_BASE + 0x20)
+#define CSCDR1 (CCM_BASE + 0x24)
+#define CS1CDR (CCM_BASE + 0x28)
+#define CS2CDR (CCM_BASE + 0x2c)
+#define CDCDR (CCM_BASE + 0x30)
+#define CHSCCDR (CCM_BASE + 0x34)
+#define CSCDR2 (CCM_BASE + 0x38)
+#define CSCDR3 (CCM_BASE + 0x3c)
+#define CSCDR4 (CCM_BASE + 0x40)
+#define CWDR (CCM_BASE + 0x44)
+#define CDHIPR (CCM_BASE + 0x48)
+#define CDCR (CCM_BASE + 0x4c)
+#define CTOR (CCM_BASE + 0x50)
+#define CLPCR (CCM_BASE + 0x54)
+#define CISR (CCM_BASE + 0x58)
+#define CIMR (CCM_BASE + 0x5c)
+#define CCOSR (CCM_BASE + 0x60)
+#define CGPR (CCM_BASE + 0x64)
+#define CCGR0 (CCM_BASE + 0x68)
+#define CCGR1 (CCM_BASE + 0x6c)
+#define CCGR2 (CCM_BASE + 0x70)
+#define CCGR3 (CCM_BASE + 0x74)
+#define CCGR4 (CCM_BASE + 0x78)
+#define CCGR5 (CCM_BASE + 0x7c)
+#define CCGR6 (CCM_BASE + 0x80)
+#define CCGR7 (CCM_BASE + 0x84)
+#define CMEOR (CCM_BASE + 0x88)
+
+#define CG0 0
+#define CG1 2
+#define CG2 4
+#define CG3 6
+#define CG4 8
+#define CG5 10
+#define CG6 12
+#define CG7 14
+#define CG8 16
+#define CG9 18
+#define CG10 20
+#define CG11 22
+#define CG12 24
+#define CG13 26
+#define CG14 28
+#define CG15 30
+
+#define BM_CCSR_PLL1_SW_SEL (0x1 << 2)
+#define BM_CCSR_STEP_SEL (0x1 << 8)
+
+#define BP_CACRR_ARM_PODF 0
+#define BM_CACRR_ARM_PODF (0x7 << 0)
+
+#define BP_CBCDR_PERIPH2_CLK2_PODF 0
+#define BM_CBCDR_PERIPH2_CLK2_PODF (0x7 << 0)
+#define BP_CBCDR_MMDC_CH1_AXI_PODF 3
+#define BM_CBCDR_MMDC_CH1_AXI_PODF (0x7 << 3)
+#define BP_CBCDR_AXI_SEL 6
+#define BM_CBCDR_AXI_SEL (0x3 << 6)
+#define BP_CBCDR_IPG_PODF 8
+#define BM_CBCDR_IPG_PODF (0x3 << 8)
+#define BP_CBCDR_AHB_PODF 10
+#define BM_CBCDR_AHB_PODF (0x7 << 10)
+#define BP_CBCDR_AXI_PODF 16
+#define BM_CBCDR_AXI_PODF (0x7 << 16)
+#define BP_CBCDR_MMDC_CH0_AXI_PODF 19
+#define BM_CBCDR_MMDC_CH0_AXI_PODF (0x7 << 19)
+#define BP_CBCDR_PERIPH_CLK_SEL 25
+#define BM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
+#define BP_CBCDR_PERIPH2_CLK_SEL 26
+#define BM_CBCDR_PERIPH2_CLK_SEL (0x1 << 26)
+#define BP_CBCDR_PERIPH_CLK2_PODF 27
+#define BM_CBCDR_PERIPH_CLK2_PODF (0x7 << 27)
+
+#define BP_CBCMR_GPU2D_AXI_SEL 0
+#define BM_CBCMR_GPU2D_AXI_SEL (0x1 << 0)
+#define BP_CBCMR_GPU3D_AXI_SEL 1
+#define BM_CBCMR_GPU3D_AXI_SEL (0x1 << 1)
+#define BP_CBCMR_GPU3D_CORE_SEL 4
+#define BM_CBCMR_GPU3D_CORE_SEL (0x3 << 4)
+#define BP_CBCMR_GPU3D_SHADER_SEL 8
+#define BM_CBCMR_GPU3D_SHADER_SEL (0x3 << 8)
+#define BP_CBCMR_PCIE_AXI_SEL 10
+#define BM_CBCMR_PCIE_AXI_SEL (0x1 << 10)
+#define BP_CBCMR_VDO_AXI_SEL 11
+#define BM_CBCMR_VDO_AXI_SEL (0x1 << 11)
+#define BP_CBCMR_PERIPH_CLK2_SEL 12
+#define BM_CBCMR_PERIPH_CLK2_SEL (0x3 << 12)
+#define BP_CBCMR_VPU_AXI_SEL 14
+#define BM_CBCMR_VPU_AXI_SEL (0x3 << 14)
+#define BP_CBCMR_GPU2D_CORE_SEL 16
+#define BM_CBCMR_GPU2D_CORE_SEL (0x3 << 16)
+#define BP_CBCMR_PRE_PERIPH_CLK_SEL 18
+#define BM_CBCMR_PRE_PERIPH_CLK_SEL (0x3 << 18)
+#define BP_CBCMR_PERIPH2_CLK2_SEL 20
+#define BM_CBCMR_PERIPH2_CLK2_SEL (0x1 << 20)
+#define BP_CBCMR_PRE_PERIPH2_CLK_SEL 21
+#define BM_CBCMR_PRE_PERIPH2_CLK_SEL (0x3 << 21)
+#define BP_CBCMR_GPU2D_CORE_PODF 23
+#define BM_CBCMR_GPU2D_CORE_PODF (0x7 << 23)
+#define BP_CBCMR_GPU3D_CORE_PODF 26
+#define BM_CBCMR_GPU3D_CORE_PODF (0x7 << 26)
+#define BP_CBCMR_GPU3D_SHADER_PODF 29
+#define BM_CBCMR_GPU3D_SHADER_PODF (0x7 << 29)
+
+#define BP_CSCMR1_PERCLK_PODF 0
+#define BM_CSCMR1_PERCLK_PODF (0x3f << 0)
+#define BP_CSCMR1_SSI1_SEL 10
+#define BM_CSCMR1_SSI1_SEL (0x3 << 10)
+#define BP_CSCMR1_SSI2_SEL 12
+#define BM_CSCMR1_SSI2_SEL (0x3 << 12)
+#define BP_CSCMR1_SSI3_SEL 14
+#define BM_CSCMR1_SSI3_SEL (0x3 << 14)
+#define BP_CSCMR1_USDHC1_SEL 16
+#define BM_CSCMR1_USDHC1_SEL (0x1 << 16)
+#define BP_CSCMR1_USDHC2_SEL 17
+#define BM_CSCMR1_USDHC2_SEL (0x1 << 17)
+#define BP_CSCMR1_USDHC3_SEL 18
+#define BM_CSCMR1_USDHC3_SEL (0x1 << 18)
+#define BP_CSCMR1_USDHC4_SEL 19
+#define BM_CSCMR1_USDHC4_SEL (0x1 << 19)
+#define BP_CSCMR1_EMI_PODF 20
+#define BM_CSCMR1_EMI_PODF (0x7 << 20)
+#define BP_CSCMR1_EMI_SLOW_PODF 23
+#define BM_CSCMR1_EMI_SLOW_PODF (0x7 << 23)
+#define BP_CSCMR1_EMI_SEL 27
+#define BM_CSCMR1_EMI_SEL (0x3 << 27)
+#define BP_CSCMR1_EMI_SLOW_SEL 29
+#define BM_CSCMR1_EMI_SLOW_SEL (0x3 << 29)
+
+#define BP_CSCMR2_CAN_PODF 2
+#define BM_CSCMR2_CAN_PODF (0x3f << 2)
+#define BM_CSCMR2_LDB_DI0_IPU_DIV (0x1 << 10)
+#define BM_CSCMR2_LDB_DI1_IPU_DIV (0x1 << 11)
+#define BP_CSCMR2_ESAI_SEL 19
+#define BM_CSCMR2_ESAI_SEL (0x3 << 19)
+
+#define BP_CSCDR1_UART_PODF 0
+#define BM_CSCDR1_UART_PODF (0x3f << 0)
+#define BP_CSCDR1_USDHC1_PODF 11
+#define BM_CSCDR1_USDHC1_PODF (0x7 << 11)
+#define BP_CSCDR1_USDHC2_PODF 16
+#define BM_CSCDR1_USDHC2_PODF (0x7 << 16)
+#define BP_CSCDR1_USDHC3_PODF 19
+#define BM_CSCDR1_USDHC3_PODF (0x7 << 19)
+#define BP_CSCDR1_USDHC4_PODF 22
+#define BM_CSCDR1_USDHC4_PODF (0x7 << 22)
+#define BP_CSCDR1_VPU_AXI_PODF 25
+#define BM_CSCDR1_VPU_AXI_PODF (0x7 << 25)
+
+#define BP_CS1CDR_SSI1_PODF 0
+#define BM_CS1CDR_SSI1_PODF (0x3f << 0)
+#define BP_CS1CDR_SSI1_PRED 6
+#define BM_CS1CDR_SSI1_PRED (0x7 << 6)
+#define BP_CS1CDR_ESAI_PRED 9
+#define BM_CS1CDR_ESAI_PRED (0x7 << 9)
+#define BP_CS1CDR_SSI3_PODF 16
+#define BM_CS1CDR_SSI3_PODF (0x3f << 16)
+#define BP_CS1CDR_SSI3_PRED 22
+#define BM_CS1CDR_SSI3_PRED (0x7 << 22)
+#define BP_CS1CDR_ESAI_PODF 25
+#define BM_CS1CDR_ESAI_PODF (0x7 << 25)
+
+#define BP_CS2CDR_SSI2_PODF 0
+#define BM_CS2CDR_SSI2_PODF (0x3f << 0)
+#define BP_CS2CDR_SSI2_PRED 6
+#define BM_CS2CDR_SSI2_PRED (0x7 << 6)
+#define BP_CS2CDR_LDB_DI0_SEL 9
+#define BM_CS2CDR_LDB_DI0_SEL (0x7 << 9)
+#define BP_CS2CDR_LDB_DI1_SEL 12
+#define BM_CS2CDR_LDB_DI1_SEL (0x7 << 12)
+#define BP_CS2CDR_ENFC_SEL 16
+#define BM_CS2CDR_ENFC_SEL (0x3 << 16)
+#define BP_CS2CDR_ENFC_PRED 18
+#define BM_CS2CDR_ENFC_PRED (0x7 << 18)
+#define BP_CS2CDR_ENFC_PODF 21
+#define BM_CS2CDR_ENFC_PODF (0x3f << 21)
+
+#define BP_CDCDR_ASRC_SERIAL_SEL 7
+#define BM_CDCDR_ASRC_SERIAL_SEL (0x3 << 7)
+#define BP_CDCDR_ASRC_SERIAL_PODF 9
+#define BM_CDCDR_ASRC_SERIAL_PODF (0x7 << 9)
+#define BP_CDCDR_ASRC_SERIAL_PRED 12
+#define BM_CDCDR_ASRC_SERIAL_PRED (0x7 << 12)
+#define BP_CDCDR_SPDIF_SEL 20
+#define BM_CDCDR_SPDIF_SEL (0x3 << 20)
+#define BP_CDCDR_SPDIF_PODF 22
+#define BM_CDCDR_SPDIF_PODF (0x7 << 22)
+#define BP_CDCDR_SPDIF_PRED 25
+#define BM_CDCDR_SPDIF_PRED (0x7 << 25)
+#define BP_CDCDR_HSI_TX_PODF 29
+#define BM_CDCDR_HSI_TX_PODF (0x7 << 29)
+#define BP_CDCDR_HSI_TX_SEL 28
+#define BM_CDCDR_HSI_TX_SEL (0x1 << 28)
+
+#define BP_CHSCCDR_IPU1_DI0_SEL 0
+#define BM_CHSCCDR_IPU1_DI0_SEL (0x7 << 0)
+#define BP_CHSCCDR_IPU1_DI0_PRE_PODF 3
+#define BM_CHSCCDR_IPU1_DI0_PRE_PODF (0x7 << 3)
+#define BP_CHSCCDR_IPU1_DI0_PRE_SEL 6
+#define BM_CHSCCDR_IPU1_DI0_PRE_SEL (0x7 << 6)
+#define BP_CHSCCDR_IPU1_DI1_SEL 9
+#define BM_CHSCCDR_IPU1_DI1_SEL (0x7 << 9)
+#define BP_CHSCCDR_IPU1_DI1_PRE_PODF 12
+#define BM_CHSCCDR_IPU1_DI1_PRE_PODF (0x7 << 12)
+#define BP_CHSCCDR_IPU1_DI1_PRE_SEL 15
+#define BM_CHSCCDR_IPU1_DI1_PRE_SEL (0x7 << 15)
+
+#define BP_CSCDR2_IPU2_DI0_SEL 0
+#define BM_CSCDR2_IPU2_DI0_SEL (0x7)
+#define BP_CSCDR2_IPU2_DI0_PRE_PODF 3
+#define BM_CSCDR2_IPU2_DI0_PRE_PODF (0x7 << 3)
+#define BP_CSCDR2_IPU2_DI0_PRE_SEL 6
+#define BM_CSCDR2_IPU2_DI0_PRE_SEL (0x7 << 6)
+#define BP_CSCDR2_IPU2_DI1_SEL 9
+#define BM_CSCDR2_IPU2_DI1_SEL (0x7 << 9)
+#define BP_CSCDR2_IPU2_DI1_PRE_PODF 12
+#define BM_CSCDR2_IPU2_DI1_PRE_PODF (0x7 << 12)
+#define BP_CSCDR2_IPU2_DI1_PRE_SEL 15
+#define BM_CSCDR2_IPU2_DI1_PRE_SEL (0x7 << 15)
+#define BP_CSCDR2_ECSPI_CLK_PODF 19
+#define BM_CSCDR2_ECSPI_CLK_PODF (0x3f << 19)
+
+#define BP_CSCDR3_IPU1_HSP_SEL 9
+#define BM_CSCDR3_IPU1_HSP_SEL (0x3 << 9)
+#define BP_CSCDR3_IPU1_HSP_PODF 11
+#define BM_CSCDR3_IPU1_HSP_PODF (0x7 << 11)
+#define BP_CSCDR3_IPU2_HSP_SEL 14
+#define BM_CSCDR3_IPU2_HSP_SEL (0x3 << 14)
+#define BP_CSCDR3_IPU2_HSP_PODF 16
+#define BM_CSCDR3_IPU2_HSP_PODF (0x7 << 16)
+
+#define BM_CDHIPR_AXI_PODF_BUSY (0x1 << 0)
+#define BM_CDHIPR_AHB_PODF_BUSY (0x1 << 1)
+#define BM_CDHIPR_MMDC_CH1_PODF_BUSY (0x1 << 2)
+#define BM_CDHIPR_PERIPH2_SEL_BUSY (0x1 << 3)
+#define BM_CDHIPR_MMDC_CH0_PODF_BUSY (0x1 << 4)
+#define BM_CDHIPR_PERIPH_SEL_BUSY (0x1 << 5)
+#define BM_CDHIPR_ARM_PODF_BUSY (0x1 << 16)
+
+#define BP_CLPCR_LPM 0
+#define BM_CLPCR_LPM (0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define BM_CLPCR_SBYOS (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define BM_CLPCR_VSTBY (0x1 << 8)
+#define BP_CLPCR_STBY_COUNT 9
+#define BM_CLPCR_STBY_COUNT (0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+
+#define FREQ_480M 480000000
+#define FREQ_528M 528000000
+#define FREQ_594M 594000000
+#define FREQ_650M 650000000
+#define FREQ_1300M 1300000000
+
+static struct clk pll1_sys;
+static struct clk pll2_bus;
+static struct clk pll3_usb_otg;
+static struct clk pll4_audio;
+static struct clk pll5_video;
+static struct clk pll6_mlb;
+static struct clk pll7_usb_host;
+static struct clk pll8_enet;
+static struct clk apbh_dma_clk;
+static struct clk arm_clk;
+static struct clk ipg_clk;
+static struct clk ahb_clk;
+static struct clk axi_clk;
+static struct clk mmdc_ch0_axi_clk;
+static struct clk mmdc_ch1_axi_clk;
+static struct clk periph_clk;
+static struct clk periph_pre_clk;
+static struct clk periph_clk2_clk;
+static struct clk periph2_clk;
+static struct clk periph2_pre_clk;
+static struct clk periph2_clk2_clk;
+static struct clk gpu2d_core_clk;
+static struct clk gpu3d_core_clk;
+static struct clk gpu3d_shader_clk;
+static struct clk ipg_perclk;
+static struct clk emi_clk;
+static struct clk emi_slow_clk;
+static struct clk can1_clk;
+static struct clk uart_clk;
+static struct clk usdhc1_clk;
+static struct clk usdhc2_clk;
+static struct clk usdhc3_clk;
+static struct clk usdhc4_clk;
+static struct clk vpu_clk;
+static struct clk hsi_tx_clk;
+static struct clk ipu1_di0_pre_clk;
+static struct clk ipu1_di1_pre_clk;
+static struct clk ipu2_di0_pre_clk;
+static struct clk ipu2_di1_pre_clk;
+static struct clk ipu1_clk;
+static struct clk ipu2_clk;
+static struct clk ssi1_clk;
+static struct clk ssi3_clk;
+static struct clk esai_clk;
+static struct clk ssi2_clk;
+static struct clk spdif_clk;
+static struct clk asrc_serial_clk;
+static struct clk gpu2d_axi_clk;
+static struct clk gpu3d_axi_clk;
+static struct clk pcie_clk;
+static struct clk vdo_axi_clk;
+static struct clk ldb_di0_clk;
+static struct clk ldb_di1_clk;
+static struct clk ipu1_di0_clk;
+static struct clk ipu1_di1_clk;
+static struct clk ipu2_di0_clk;
+static struct clk ipu2_di1_clk;
+static struct clk enfc_clk;
+static struct clk dummy_clk = {};
+
+static unsigned long external_high_reference;
+static unsigned long external_low_reference;
+static unsigned long oscillator_reference;
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+ return oscillator_reference;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+ return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+ return external_low_reference;
+}
+
+static struct clk ckil_clk = {
+ .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk ckih_clk = {
+ .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+ .get_rate = get_oscillator_reference_clock_rate,
+};
+
+static inline void __iomem *pll_get_reg_addr(struct clk *pll)
+{
+ if (pll == &pll1_sys)
+ return PLL1_SYS;
+ else if (pll == &pll2_bus)
+ return PLL2_BUS;
+ else if (pll == &pll3_usb_otg)
+ return PLL3_USB_OTG;
+ else if (pll == &pll4_audio)
+ return PLL4_AUDIO;
+ else if (pll == &pll5_video)
+ return PLL5_VIDEO;
+ else if (pll == &pll6_mlb)
+ return PLL6_MLB;
+ else if (pll == &pll7_usb_host)
+ return PLL7_USB_HOST;
+ else if (pll == &pll8_enet)
+ return PLL8_ENET;
+ else
+ BUG();
+
+ return NULL;
+}
+
+static int pll_enable(struct clk *clk)
+{
+ int timeout = 0x100000;
+ void __iomem *reg;
+ u32 val;
+
+ reg = pll_get_reg_addr(clk);
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_BYPASS;
+ val &= ~BM_PLL_POWER_DOWN;
+ /* 480MHz PLLs have the opposite definition for power bit */
+ if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+ val |= BM_PLL_POWER_DOWN;
+ writel_relaxed(val, reg);
+
+ /* Wait for PLL to lock */
+ while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ return -EBUSY;
+
+ /* Enable the PLL output now */
+ val = readl_relaxed(reg);
+ val |= BM_PLL_ENABLE;
+ writel_relaxed(val, reg);
+
+ return 0;
+}
+
+static void pll_disable(struct clk *clk)
+{
+ void __iomem *reg;
+ u32 val;
+
+ reg = pll_get_reg_addr(clk);
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_ENABLE;
+ val |= BM_PLL_BYPASS;
+ val |= BM_PLL_POWER_DOWN;
+ if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
+ val &= ~BM_PLL_POWER_DOWN;
+ writel_relaxed(val, reg);
+}
+
+static unsigned long pll1_sys_get_rate(struct clk *clk)
+{
+ u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
+ BP_PLL_SYS_DIV_SELECT;
+
+ return clk_get_rate(clk->parent) * div / 2;
+}
+
+static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, div;
+
+ if (rate < FREQ_650M || rate > FREQ_1300M)
+ return -EINVAL;
+
+ div = rate * 2 / clk_get_rate(clk->parent);
+ val = readl_relaxed(PLL1_SYS);
+ val &= ~BM_PLL_SYS_DIV_SELECT;
+ val |= div << BP_PLL_SYS_DIV_SELECT;
+ writel_relaxed(val, PLL1_SYS);
+
+ return 0;
+}
+
+static unsigned long pll8_enet_get_rate(struct clk *clk)
+{
+ u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
+ BP_PLL_ENET_DIV_SELECT;
+
+ switch (div) {
+ case 0:
+ return 25000000;
+ case 1:
+ return 50000000;
+ case 2:
+ return 100000000;
+ case 3:
+ return 125000000;
+ }
+
+ return 0;
+}
+
+static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, div;
+
+ switch (rate) {
+ case 25000000:
+ div = 0;
+ break;
+ case 50000000:
+ div = 1;
+ break;
+ case 100000000:
+ div = 2;
+ break;
+ case 125000000:
+ div = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= ~BM_PLL_ENET_DIV_SELECT;
+ val |= div << BP_PLL_ENET_DIV_SELECT;
+ writel_relaxed(val, PLL8_ENET);
+
+ return 0;
+}
+
+static unsigned long pll_av_get_rate(struct clk *clk)
+{
+ void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
+ u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
+ u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
+ BP_PLL_AV_DIV_SELECT;
+
+ return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static int pll_av_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
+ unsigned int parent_rate = clk_get_rate(clk->parent);
+ u32 val, div;
+ u32 mfn, mfd = 1000000;
+ s64 temp64;
+
+ if (rate < FREQ_650M || rate > FREQ_1300M)
+ return -EINVAL;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ val = readl_relaxed(reg);
+ val &= ~BM_PLL_AV_DIV_SELECT;
+ val |= div << BP_PLL_AV_DIV_SELECT;
+ writel_relaxed(val, reg);
+ writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
+ writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
+
+ return 0;
+}
+
+static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
+{
+ void __iomem *reg;
+
+ if (clk == &pll2_bus) {
+ reg = PLL2_BUS;
+ *bp = BP_PLL_BUS_DIV_SELECT;
+ *bm = BM_PLL_BUS_DIV_SELECT;
+ } else if (clk == &pll3_usb_otg) {
+ reg = PLL3_USB_OTG;
+ *bp = BP_PLL_USB_DIV_SELECT;
+ *bm = BM_PLL_USB_DIV_SELECT;
+ } else if (clk == &pll7_usb_host) {
+ reg = PLL7_USB_HOST;
+ *bp = BP_PLL_USB_DIV_SELECT;
+ *bm = BM_PLL_USB_DIV_SELECT;
+ } else {
+ BUG();
+ }
+
+ return reg;
+}
+
+static unsigned long pll_get_rate(struct clk *clk)
+{
+ void __iomem *reg;
+ u32 div, bp, bm;
+
+ reg = pll_get_div_reg_bit(clk, &bp, &bm);
+ div = (readl_relaxed(reg) & bm) >> bp;
+
+ return (div == 1) ? clk_get_rate(clk->parent) * 22 :
+ clk_get_rate(clk->parent) * 20;
+}
+
+static int pll_set_rate(struct clk *clk, unsigned long rate)
+{
+ void __iomem *reg;
+ u32 val, div, bp, bm;
+
+ if (rate == FREQ_528M)
+ div = 1;
+ else if (rate == FREQ_480M)
+ div = 0;
+ else
+ return -EINVAL;
+
+ reg = pll_get_div_reg_bit(clk, &bp, &bm);
+ val = readl_relaxed(reg);
+ val &= ~bm;
+ val |= div << bp;
+ writel_relaxed(val, reg);
+
+ return 0;
+}
+
+#define pll2_bus_get_rate pll_get_rate
+#define pll2_bus_set_rate pll_set_rate
+#define pll3_usb_otg_get_rate pll_get_rate
+#define pll3_usb_otg_set_rate pll_set_rate
+#define pll7_usb_host_get_rate pll_get_rate
+#define pll7_usb_host_set_rate pll_set_rate
+#define pll4_audio_get_rate pll_av_get_rate
+#define pll4_audio_set_rate pll_av_set_rate
+#define pll5_video_get_rate pll_av_get_rate
+#define pll5_video_set_rate pll_av_set_rate
+#define pll6_mlb_get_rate NULL
+#define pll6_mlb_set_rate NULL
+
+#define DEF_PLL(name) \
+ static struct clk name = { \
+ .enable = pll_enable, \
+ .disable = pll_disable, \
+ .get_rate = name##_get_rate, \
+ .set_rate = name##_set_rate, \
+ .parent = &osc_clk, \
+ }
+
+DEF_PLL(pll1_sys);
+DEF_PLL(pll2_bus);
+DEF_PLL(pll3_usb_otg);
+DEF_PLL(pll4_audio);
+DEF_PLL(pll5_video);
+DEF_PLL(pll6_mlb);
+DEF_PLL(pll7_usb_host);
+DEF_PLL(pll8_enet);
+
+static unsigned long pfd_get_rate(struct clk *clk)
+{
+ u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+ u32 frac, bp_frac;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ bp_frac = clk->enable_shift - 7;
+ frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int pfd_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 val, frac, bp_frac;
+ u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ /*
+ * Round up the divider so that we don't set a rate
+ * higher than what is requested
+ */
+ tmp += rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ frac = (frac < 12) ? 12 : frac;
+ frac = (frac > 35) ? 35 : frac;
+
+ /*
+ * The frac field always starts from 7 bits lower
+ * position of enable bit
+ */
+ bp_frac = clk->enable_shift - 7;
+ val = readl_relaxed(clk->enable_reg);
+ val &= ~(PFD_FRAC_MASK << bp_frac);
+ val |= frac << bp_frac;
+ writel_relaxed(val, clk->enable_reg);
+
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ do_div(tmp, frac);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+
+ return 0;
+}
+
+static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 frac;
+ u64 tmp;
+
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ tmp += rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ frac = (frac < 12) ? 12 : frac;
+ frac = (frac > 35) ? 35 : frac;
+ tmp = (u64) clk_get_rate(clk->parent) * 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int pfd_enable(struct clk *clk)
+{
+ u32 val;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ val = readl_relaxed(clk->enable_reg);
+ val &= ~(1 << clk->enable_shift);
+ writel_relaxed(val, clk->enable_reg);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+
+ return 0;
+}
+
+static void pfd_disable(struct clk *clk)
+{
+ u32 val;
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.enable(&apbh_dma_clk);
+
+ val = readl_relaxed(clk->enable_reg);
+ val |= 1 << clk->enable_shift;
+ writel_relaxed(val, clk->enable_reg);
+
+ if (apbh_dma_clk.usecount == 0)
+ apbh_dma_clk.disable(&apbh_dma_clk);
+}
+
+#define DEF_PFD(name, er, es, p) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = pfd_enable, \
+ .disable = pfd_disable, \
+ .get_rate = pfd_get_rate, \
+ .set_rate = pfd_set_rate, \
+ .round_rate = pfd_round_rate, \
+ .parent = p, \
+ }
+
+DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
+DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
+DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
+DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
+DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
+
+static unsigned long pll2_200m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk pll2_200m = {
+ .parent = &pll2_pfd_400m,
+ .get_rate = pll2_200m_get_rate,
+};
+
+static unsigned long pll3_120m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 4;
+}
+
+static struct clk pll3_120m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_120m_get_rate,
+};
+
+static unsigned long pll3_80m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 6;
+}
+
+static struct clk pll3_80m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_80m_get_rate,
+};
+
+static unsigned long pll3_60m_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 8;
+}
+
+static struct clk pll3_60m = {
+ .parent = &pll3_usb_otg,
+ .get_rate = pll3_60m_get_rate,
+};
+
+static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ u32 val = readl_relaxed(CCSR);
+
+ if (parent == &pll1_sys) {
+ val &= ~BM_CCSR_PLL1_SW_SEL;
+ val &= ~BM_CCSR_STEP_SEL;
+ } else if (parent == &osc_clk) {
+ val |= BM_CCSR_PLL1_SW_SEL;
+ val &= ~BM_CCSR_STEP_SEL;
+ } else if (parent == &pll2_pfd_400m) {
+ val |= BM_CCSR_PLL1_SW_SEL;
+ val |= BM_CCSR_STEP_SEL;
+ } else {
+ return -EINVAL;
+ }
+
+ writel_relaxed(val, CCSR);
+
+ return 0;
+}
+
+static struct clk pll1_sw_clk = {
+ .parent = &pll1_sys,
+ .set_parent = pll1_sw_clk_set_parent,
+};
+
+static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
+{
+ u32 min_pred, temp_pred, old_err, err;
+
+ if (div >= 512) {
+ *pred = 8;
+ *podf = 64;
+ } else if (div >= 8) {
+ min_pred = (div - 1) / 64 + 1;
+ old_err = 8;
+ for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
+ err = div % temp_pred;
+ if (err == 0) {
+ *pred = temp_pred;
+ break;
+ }
+ err = temp_pred - err;
+ if (err < old_err) {
+ old_err = err;
+ *pred = temp_pred;
+ }
+ }
+ *podf = (div + *pred - 1) / *pred;
+ } else if (div < 8) {
+ *pred = div;
+ *podf = 1;
+ }
+}
+
+static int _clk_enable(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg |= 0x3 << clk->enable_shift;
+ writel_relaxed(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void _clk_disable(struct clk *clk)
+{
+ u32 reg;
+ reg = readl_relaxed(clk->enable_reg);
+ reg &= ~(0x3 << clk->enable_shift);
+ writel_relaxed(reg, clk->enable_reg);
+}
+
+struct divider {
+ struct clk *clk;
+ void __iomem *reg;
+ u32 bp_pred;
+ u32 bm_pred;
+ u32 bp_podf;
+ u32 bm_podf;
+};
+
+#define DEF_CLK_DIV1(d, c, r, b) \
+ static struct divider d = { \
+ .clk = c, \
+ .reg = r, \
+ .bp_podf = BP_##r##_##b##_PODF, \
+ .bm_podf = BM_##r##_##b##_PODF, \
+ }
+
+DEF_CLK_DIV1(arm_div, &arm_clk, CACRR, ARM);
+DEF_CLK_DIV1(ipg_div, &ipg_clk, CBCDR, IPG);
+DEF_CLK_DIV1(ahb_div, &ahb_clk, CBCDR, AHB);
+DEF_CLK_DIV1(axi_div, &axi_clk, CBCDR, AXI);
+DEF_CLK_DIV1(mmdc_ch0_axi_div, &mmdc_ch0_axi_clk, CBCDR, MMDC_CH0_AXI);
+DEF_CLK_DIV1(mmdc_ch1_axi_div, &mmdc_ch1_axi_clk, CBCDR, MMDC_CH1_AXI);
+DEF_CLK_DIV1(periph_clk2_div, &periph_clk2_clk, CBCDR, PERIPH_CLK2);
+DEF_CLK_DIV1(periph2_clk2_div, &periph2_clk2_clk, CBCDR, PERIPH2_CLK2);
+DEF_CLK_DIV1(gpu2d_core_div, &gpu2d_core_clk, CBCMR, GPU2D_CORE);
+DEF_CLK_DIV1(gpu3d_core_div, &gpu3d_core_clk, CBCMR, GPU3D_CORE);
+DEF_CLK_DIV1(gpu3d_shader_div, &gpu3d_shader_clk, CBCMR, GPU3D_SHADER);
+DEF_CLK_DIV1(ipg_perclk_div, &ipg_perclk, CSCMR1, PERCLK);
+DEF_CLK_DIV1(emi_div, &emi_clk, CSCMR1, EMI);
+DEF_CLK_DIV1(emi_slow_div, &emi_slow_clk, CSCMR1, EMI_SLOW);
+DEF_CLK_DIV1(can_div, &can1_clk, CSCMR2, CAN);
+DEF_CLK_DIV1(uart_div, &uart_clk, CSCDR1, UART);
+DEF_CLK_DIV1(usdhc1_div, &usdhc1_clk, CSCDR1, USDHC1);
+DEF_CLK_DIV1(usdhc2_div, &usdhc2_clk, CSCDR1, USDHC2);
+DEF_CLK_DIV1(usdhc3_div, &usdhc3_clk, CSCDR1, USDHC3);
+DEF_CLK_DIV1(usdhc4_div, &usdhc4_clk, CSCDR1, USDHC4);
+DEF_CLK_DIV1(vpu_div, &vpu_clk, CSCDR1, VPU_AXI);
+DEF_CLK_DIV1(hsi_tx_div, &hsi_tx_clk, CDCDR, HSI_TX);
+DEF_CLK_DIV1(ipu1_di0_pre_div, &ipu1_di0_pre_clk, CHSCCDR, IPU1_DI0_PRE);
+DEF_CLK_DIV1(ipu1_di1_pre_div, &ipu1_di1_pre_clk, CHSCCDR, IPU1_DI1_PRE);
+DEF_CLK_DIV1(ipu2_di0_pre_div, &ipu2_di0_pre_clk, CSCDR2, IPU2_DI0_PRE);
+DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE);
+DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP);
+DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP);
+
+#define DEF_CLK_DIV2(d, c, r, b) \
+ static struct divider d = { \
+ .clk = c, \
+ .reg = r, \
+ .bp_pred = BP_##r##_##b##_PRED, \
+ .bm_pred = BM_##r##_##b##_PRED, \
+ .bp_podf = BP_##r##_##b##_PODF, \
+ .bm_podf = BM_##r##_##b##_PODF, \
+ }
+
+DEF_CLK_DIV2(ssi1_div, &ssi1_clk, CS1CDR, SSI1);
+DEF_CLK_DIV2(ssi3_div, &ssi3_clk, CS1CDR, SSI3);
+DEF_CLK_DIV2(esai_div, &esai_clk, CS1CDR, ESAI);
+DEF_CLK_DIV2(ssi2_div, &ssi2_clk, CS2CDR, SSI2);
+DEF_CLK_DIV2(enfc_div, &enfc_clk, CS2CDR, ENFC);
+DEF_CLK_DIV2(spdif_div, &spdif_clk, CDCDR, SPDIF);
+DEF_CLK_DIV2(asrc_serial_div, &asrc_serial_clk, CDCDR, ASRC_SERIAL);
+
+static struct divider *dividers[] = {
+ &arm_div,
+ &ipg_div,
+ &ahb_div,
+ &axi_div,
+ &mmdc_ch0_axi_div,
+ &mmdc_ch1_axi_div,
+ &periph_clk2_div,
+ &periph2_clk2_div,
+ &gpu2d_core_div,
+ &gpu3d_core_div,
+ &gpu3d_shader_div,
+ &ipg_perclk_div,
+ &emi_div,
+ &emi_slow_div,
+ &can_div,
+ &uart_div,
+ &usdhc1_div,
+ &usdhc2_div,
+ &usdhc3_div,
+ &usdhc4_div,
+ &vpu_div,
+ &hsi_tx_div,
+ &ipu1_di0_pre_div,
+ &ipu1_di1_pre_div,
+ &ipu2_di0_pre_div,
+ &ipu2_di1_pre_div,
+ &ipu1_div,
+ &ipu2_div,
+ &ssi1_div,
+ &ssi3_div,
+ &esai_div,
+ &ssi2_div,
+ &enfc_div,
+ &spdif_div,
+ &asrc_serial_div,
+};
+
+static unsigned long ldb_di_clk_get_rate(struct clk *clk)
+{
+ u32 val = readl_relaxed(CSCMR2);
+
+ val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
+ BM_CSCMR2_LDB_DI1_IPU_DIV;
+ if (val)
+ return clk_get_rate(clk->parent) / 7;
+ else
+ return clk_get_rate(clk->parent) * 2 / 7;
+}
+
+static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 val = readl_relaxed(CSCMR2);
+
+ if (rate * 7 <= parent_rate + parent_rate / 20)
+ val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
+ else
+ val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
+
+ writel_relaxed(val, CSCMR2);
+
+ return 0;
+}
+
+static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+
+ if (rate * 7 <= parent_rate + parent_rate / 20)
+ return parent_rate / 7;
+ else
+ return 2 * parent_rate / 7;
+}
+
+static unsigned long _clk_get_rate(struct clk *clk)
+{
+ struct divider *d;
+ u32 val, pred, podf;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_get_rate(clk);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return clk_get_rate(clk->parent);
+
+ val = readl_relaxed(d->reg);
+ pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
+ podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
+
+ return clk_get_rate(clk->parent) / (pred * podf);
+}
+
+static int clk_busy_wait(struct clk *clk)
+{
+ int timeout = 0x100000;
+ u32 bm;
+
+ if (clk == &axi_clk)
+ bm = BM_CDHIPR_AXI_PODF_BUSY;
+ else if (clk == &ahb_clk)
+ bm = BM_CDHIPR_AHB_PODF_BUSY;
+ else if (clk == &mmdc_ch0_axi_clk)
+ bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
+ else if (clk == &periph_clk)
+ bm = BM_CDHIPR_PERIPH_SEL_BUSY;
+ else if (clk == &arm_clk)
+ bm = BM_CDHIPR_ARM_PODF_BUSY;
+ else
+ return -EINVAL;
+
+ while ((readl_relaxed(CDHIPR) & bm) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout))
+ return -EBUSY;
+
+ return 0;
+}
+
+static int _clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ struct divider *d;
+ u32 val, div, max_div, pred = 0, podf;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_set_rate(clk, rate);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ max_div = ((d->bm_pred >> d->bp_pred) + 1) *
+ ((d->bm_pred >> d->bp_pred) + 1);
+
+ div = parent_rate / rate;
+ if (div == 0)
+ div++;
+
+ if ((parent_rate / div != rate) || div > max_div)
+ return -EINVAL;
+
+ if (d->bm_pred) {
+ calc_pred_podf_dividers(div, &pred, &podf);
+ } else {
+ pred = 1;
+ podf = div;
+ }
+
+ val = readl_relaxed(d->reg);
+ val &= ~(d->bm_pred | d->bm_podf);
+ val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
+ writel_relaxed(val, d->reg);
+
+ if (clk == &axi_clk || clk == &ahb_clk ||
+ clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
+ return clk_busy_wait(clk);
+
+ return 0;
+}
+
+static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ u32 div = parent_rate / rate;
+ u32 div_max, pred = 0, podf;
+ struct divider *d;
+ int i, num;
+
+ if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
+ return ldb_di_clk_round_rate(clk, rate);
+
+ num = ARRAY_SIZE(dividers);
+ for (i = 0; i < num; i++)
+ if (dividers[i]->clk == clk) {
+ d = dividers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ if (div == 0 || parent_rate % rate)
+ div++;
+
+ if (d->bm_pred) {
+ calc_pred_podf_dividers(div, &pred, &podf);
+ div = pred * podf;
+ } else {
+ div_max = (d->bm_podf >> d->bp_podf) + 1;
+ if (div > div_max)
+ div = div_max;
+ }
+
+ return parent_rate / div;
+}
+
+struct multiplexer {
+ struct clk *clk;
+ void __iomem *reg;
+ u32 bp;
+ u32 bm;
+ int pnum;
+ struct clk *parents[];
+};
+
+static struct multiplexer axi_mux = {
+ .clk = &axi_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_AXI_SEL,
+ .bm = BM_CBCDR_AXI_SEL,
+ .parents = {
+ &periph_clk,
+ &pll2_pfd_400m,
+ &pll3_pfd_540m,
+ NULL
+ },
+};
+
+static struct multiplexer periph_mux = {
+ .clk = &periph_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_PERIPH_CLK_SEL,
+ .bm = BM_CBCDR_PERIPH_CLK_SEL,
+ .parents = {
+ &periph_pre_clk,
+ &periph_clk2_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph_pre_mux = {
+ .clk = &periph_pre_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
+ .bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
+ .parents = {
+ &pll2_bus,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ &pll2_200m,
+ NULL
+ },
+};
+
+static struct multiplexer periph_clk2_mux = {
+ .clk = &periph_clk2_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PERIPH_CLK2_SEL,
+ .bm = BM_CBCMR_PERIPH_CLK2_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &osc_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_mux = {
+ .clk = &periph2_clk,
+ .reg = CBCDR,
+ .bp = BP_CBCDR_PERIPH2_CLK_SEL,
+ .bm = BM_CBCDR_PERIPH2_CLK_SEL,
+ .parents = {
+ &periph2_pre_clk,
+ &periph2_clk2_clk,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_pre_mux = {
+ .clk = &periph2_pre_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
+ .bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
+ .parents = {
+ &pll2_bus,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ &pll2_200m,
+ NULL
+ },
+};
+
+static struct multiplexer periph2_clk2_mux = {
+ .clk = &periph2_clk2_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PERIPH2_CLK2_SEL,
+ .bm = BM_CBCMR_PERIPH2_CLK2_SEL,
+ .parents = {
+ &pll3_usb_otg,
+ &osc_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu2d_axi_mux = {
+ .clk = &gpu2d_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU2D_AXI_SEL,
+ .bm = BM_CBCMR_GPU2D_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_axi_mux = {
+ .clk = &gpu3d_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_AXI_SEL,
+ .bm = BM_CBCMR_GPU3D_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_core_mux = {
+ .clk = &gpu3d_core_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_CORE_SEL,
+ .bm = BM_CBCMR_GPU3D_CORE_SEL,
+ .parents = {
+ &mmdc_ch0_axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_594m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+static struct multiplexer gpu3d_shader_mux = {
+ .clk = &gpu3d_shader_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU3D_SHADER_SEL,
+ .bm = BM_CBCMR_GPU3D_SHADER_SEL,
+ .parents = {
+ &mmdc_ch0_axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_594m,
+ &pll3_pfd_720m,
+ NULL
+ },
+};
+
+static struct multiplexer pcie_axi_mux = {
+ .clk = &pcie_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_PCIE_AXI_SEL,
+ .bm = BM_CBCMR_PCIE_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer vdo_axi_mux = {
+ .clk = &vdo_axi_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_VDO_AXI_SEL,
+ .bm = BM_CBCMR_VDO_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &ahb_clk,
+ NULL
+ },
+};
+
+static struct multiplexer vpu_axi_mux = {
+ .clk = &vpu_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_VPU_AXI_SEL,
+ .bm = BM_CBCMR_VPU_AXI_SEL,
+ .parents = {
+ &axi_clk,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer gpu2d_core_mux = {
+ .clk = &gpu2d_core_clk,
+ .reg = CBCMR,
+ .bp = BP_CBCMR_GPU2D_CORE_SEL,
+ .bm = BM_CBCMR_GPU2D_CORE_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_352m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+#define DEF_SSI_MUX(id) \
+ static struct multiplexer ssi##id##_mux = { \
+ .clk = &ssi##id##_clk, \
+ .reg = CSCMR1, \
+ .bp = BP_CSCMR1_SSI##id##_SEL, \
+ .bm = BM_CSCMR1_SSI##id##_SEL, \
+ .parents = { \
+ &pll3_pfd_508m, \
+ &pll3_pfd_454m, \
+ &pll4_audio, \
+ NULL \
+ }, \
+ }
+
+DEF_SSI_MUX(1);
+DEF_SSI_MUX(2);
+DEF_SSI_MUX(3);
+
+#define DEF_USDHC_MUX(id) \
+ static struct multiplexer usdhc##id##_mux = { \
+ .clk = &usdhc##id##_clk, \
+ .reg = CSCMR1, \
+ .bp = BP_CSCMR1_USDHC##id##_SEL, \
+ .bm = BM_CSCMR1_USDHC##id##_SEL, \
+ .parents = { \
+ &pll2_pfd_400m, \
+ &pll2_pfd_352m, \
+ NULL \
+ }, \
+ }
+
+DEF_USDHC_MUX(1);
+DEF_USDHC_MUX(2);
+DEF_USDHC_MUX(3);
+DEF_USDHC_MUX(4);
+
+static struct multiplexer emi_mux = {
+ .clk = &emi_clk,
+ .reg = CSCMR1,
+ .bp = BP_CSCMR1_EMI_SEL,
+ .bm = BM_CSCMR1_EMI_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer emi_slow_mux = {
+ .clk = &emi_slow_clk,
+ .reg = CSCMR1,
+ .bp = BP_CSCMR1_EMI_SLOW_SEL,
+ .bm = BM_CSCMR1_EMI_SLOW_SEL,
+ .parents = {
+ &axi_clk,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ &pll2_pfd_352m,
+ NULL
+ },
+};
+
+static struct multiplexer esai_mux = {
+ .clk = &esai_clk,
+ .reg = CSCMR2,
+ .bp = BP_CSCMR2_ESAI_SEL,
+ .bm = BM_CSCMR2_ESAI_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+#define DEF_LDB_DI_MUX(id) \
+ static struct multiplexer ldb_di##id##_mux = { \
+ .clk = &ldb_di##id##_clk, \
+ .reg = CS2CDR, \
+ .bp = BP_CS2CDR_LDB_DI##id##_SEL, \
+ .bm = BM_CS2CDR_LDB_DI##id##_SEL, \
+ .parents = { \
+ &pll5_video, \
+ &pll2_pfd_352m, \
+ &pll2_pfd_400m, \
+ &pll3_pfd_540m, \
+ &pll3_usb_otg, \
+ NULL \
+ }, \
+ }
+
+DEF_LDB_DI_MUX(0);
+DEF_LDB_DI_MUX(1);
+
+static struct multiplexer enfc_mux = {
+ .clk = &enfc_clk,
+ .reg = CS2CDR,
+ .bp = BP_CS2CDR_ENFC_SEL,
+ .bm = BM_CS2CDR_ENFC_SEL,
+ .parents = {
+ &pll2_pfd_352m,
+ &pll2_bus,
+ &pll3_usb_otg,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+static struct multiplexer spdif_mux = {
+ .clk = &spdif_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_SPDIF_SEL,
+ .bm = BM_CDCDR_SPDIF_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+static struct multiplexer asrc_serial_mux = {
+ .clk = &asrc_serial_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_ASRC_SERIAL_SEL,
+ .bm = BM_CDCDR_ASRC_SERIAL_SEL,
+ .parents = {
+ &pll4_audio,
+ &pll3_pfd_508m,
+ &pll3_pfd_454m,
+ &pll3_usb_otg,
+ NULL
+ },
+};
+
+static struct multiplexer hsi_tx_mux = {
+ .clk = &hsi_tx_clk,
+ .reg = CDCDR,
+ .bp = BP_CDCDR_HSI_TX_SEL,
+ .bm = BM_CDCDR_HSI_TX_SEL,
+ .parents = {
+ &pll3_120m,
+ &pll2_pfd_400m,
+ NULL
+ },
+};
+
+#define DEF_IPU_DI_PRE_MUX(r, i, d) \
+ static struct multiplexer ipu##i##_di##d##_pre_mux = { \
+ .clk = &ipu##i##_di##d##_pre_clk, \
+ .reg = r, \
+ .bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL, \
+ .bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL, \
+ .parents = { \
+ &mmdc_ch0_axi_clk, \
+ &pll3_usb_otg, \
+ &pll5_video, \
+ &pll2_pfd_352m, \
+ &pll2_pfd_400m, \
+ &pll3_pfd_540m, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_DI_MUX(r, i, d) \
+ static struct multiplexer ipu##i##_di##d##_mux = { \
+ .clk = &ipu##i##_di##d##_clk, \
+ .reg = r, \
+ .bp = BP_##r##_IPU##i##_DI##d##_SEL, \
+ .bm = BM_##r##_IPU##i##_DI##d##_SEL, \
+ .parents = { \
+ &ipu##i##_di##d##_pre_clk, \
+ &dummy_clk, \
+ &dummy_clk, \
+ &ldb_di0_clk, \
+ &ldb_di1_clk, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
+DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
+DEF_IPU_DI_MUX(CSCDR2, 2, 0);
+DEF_IPU_DI_MUX(CSCDR2, 2, 1);
+
+#define DEF_IPU_MUX(id) \
+ static struct multiplexer ipu##id##_mux = { \
+ .clk = &ipu##id##_clk, \
+ .reg = CSCDR3, \
+ .bp = BP_CSCDR3_IPU##id##_HSP_SEL, \
+ .bm = BM_CSCDR3_IPU##id##_HSP_SEL, \
+ .parents = { \
+ &mmdc_ch0_axi_clk, \
+ &pll2_pfd_400m, \
+ &pll3_120m, \
+ &pll3_pfd_540m, \
+ NULL \
+ }, \
+ }
+
+DEF_IPU_MUX(1);
+DEF_IPU_MUX(2);
+
+static struct multiplexer *multiplexers[] = {
+ &axi_mux,
+ &periph_mux,
+ &periph_pre_mux,
+ &periph_clk2_mux,
+ &periph2_mux,
+ &periph2_pre_mux,
+ &periph2_clk2_mux,
+ &gpu2d_axi_mux,
+ &gpu3d_axi_mux,
+ &gpu3d_core_mux,
+ &gpu3d_shader_mux,
+ &pcie_axi_mux,
+ &vdo_axi_mux,
+ &vpu_axi_mux,
+ &gpu2d_core_mux,
+ &ssi1_mux,
+ &ssi2_mux,
+ &ssi3_mux,
+ &usdhc1_mux,
+ &usdhc2_mux,
+ &usdhc3_mux,
+ &usdhc4_mux,
+ &emi_mux,
+ &emi_slow_mux,
+ &esai_mux,
+ &ldb_di0_mux,
+ &ldb_di1_mux,
+ &enfc_mux,
+ &spdif_mux,
+ &asrc_serial_mux,
+ &hsi_tx_mux,
+ &ipu1_di0_pre_mux,
+ &ipu1_di0_mux,
+ &ipu1_di1_pre_mux,
+ &ipu1_di1_mux,
+ &ipu2_di0_pre_mux,
+ &ipu2_di0_mux,
+ &ipu2_di1_pre_mux,
+ &ipu2_di1_mux,
+ &ipu1_mux,
+ &ipu2_mux,
+};
+
+static int _clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct multiplexer *m;
+ int i, num;
+ u32 val;
+
+ num = ARRAY_SIZE(multiplexers);
+ for (i = 0; i < num; i++)
+ if (multiplexers[i]->clk == clk) {
+ m = multiplexers[i];
+ break;
+ }
+ if (i == num)
+ return -EINVAL;
+
+ i = 0;
+ while (m->parents[i]) {
+ if (parent == m->parents[i])
+ break;
+ i++;
+ }
+ if (!m->parents[i])
+ return -EINVAL;
+
+ val = readl_relaxed(m->reg);
+ val &= ~m->bm;
+ val |= i << m->bp;
+ writel_relaxed(val, m->reg);
+
+ if (clk == &periph_clk)
+ return clk_busy_wait(clk);
+
+ return 0;
+}
+
+#define DEF_NG_CLK(name, p) \
+ static struct clk name = { \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ }
+
+DEF_NG_CLK(periph_clk2_clk, &osc_clk);
+DEF_NG_CLK(periph_pre_clk, &pll2_bus);
+DEF_NG_CLK(periph_clk, &periph_pre_clk);
+DEF_NG_CLK(periph2_clk2_clk, &osc_clk);
+DEF_NG_CLK(periph2_pre_clk, &pll2_bus);
+DEF_NG_CLK(periph2_clk, &periph2_pre_clk);
+DEF_NG_CLK(axi_clk, &periph_clk);
+DEF_NG_CLK(emi_clk, &axi_clk);
+DEF_NG_CLK(arm_clk, &pll1_sw_clk);
+DEF_NG_CLK(ahb_clk, &periph_clk);
+DEF_NG_CLK(ipg_clk, &ahb_clk);
+DEF_NG_CLK(ipg_perclk, &ipg_clk);
+DEF_NG_CLK(ipu1_di0_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu1_di1_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di0_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(ipu2_di1_pre_clk, &pll3_pfd_540m);
+DEF_NG_CLK(asrc_serial_clk, &pll3_usb_otg);
+
+#define DEF_CLK(name, er, es, p, s) \
+ static struct clk name = { \
+ .enable_reg = er, \
+ .enable_shift = es, \
+ .enable = _clk_enable, \
+ .disable = _clk_disable, \
+ .get_rate = _clk_get_rate, \
+ .set_rate = _clk_set_rate, \
+ .round_rate = _clk_round_rate, \
+ .set_parent = _clk_set_parent, \
+ .parent = p, \
+ .secondary = s, \
+ }
+
+DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL);
+DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL);
+DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL);
+DEF_CLK(asrc_clk, CCGR0, CG3, &pll4_audio, NULL);
+DEF_CLK(can1_serial_clk, CCGR0, CG8, &pll3_usb_otg, NULL);
+DEF_CLK(can1_clk, CCGR0, CG7, &pll3_usb_otg, &can1_serial_clk);
+DEF_CLK(can2_serial_clk, CCGR0, CG10, &pll3_usb_otg, NULL);
+DEF_CLK(can2_clk, CCGR0, CG9, &pll3_usb_otg, &can2_serial_clk);
+DEF_CLK(ecspi1_clk, CCGR1, CG0, &pll3_60m, NULL);
+DEF_CLK(ecspi2_clk, CCGR1, CG1, &pll3_60m, NULL);
+DEF_CLK(ecspi3_clk, CCGR1, CG2, &pll3_60m, NULL);
+DEF_CLK(ecspi4_clk, CCGR1, CG3, &pll3_60m, NULL);
+DEF_CLK(ecspi5_clk, CCGR1, CG4, &pll3_60m, NULL);
+DEF_CLK(enet_clk, CCGR1, CG5, &ipg_clk, NULL);
+DEF_CLK(esai_clk, CCGR1, CG8, &pll3_usb_otg, NULL);
+DEF_CLK(gpt_serial_clk, CCGR1, CG11, &ipg_perclk, NULL);
+DEF_CLK(gpt_clk, CCGR1, CG10, &ipg_perclk, &gpt_serial_clk);
+DEF_CLK(gpu2d_core_clk, CCGR1, CG12, &pll2_pfd_352m, &gpu2d_axi_clk);
+DEF_CLK(gpu3d_core_clk, CCGR1, CG13, &pll2_pfd_594m, &gpu3d_axi_clk);
+DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m, &gpu3d_axi_clk);
+DEF_CLK(hdmi_iahb_clk, CCGR2, CG0, &ahb_clk, NULL);
+DEF_CLK(hdmi_isfr_clk, CCGR2, CG2, &pll3_pfd_540m, &hdmi_iahb_clk);
+DEF_CLK(i2c1_clk, CCGR2, CG3, &ipg_perclk, NULL);
+DEF_CLK(i2c2_clk, CCGR2, CG4, &ipg_perclk, NULL);
+DEF_CLK(i2c3_clk, CCGR2, CG5, &ipg_perclk, NULL);
+DEF_CLK(iim_clk, CCGR2, CG6, &ipg_clk, NULL);
+DEF_CLK(enfc_clk, CCGR2, CG7, &pll2_pfd_352m, NULL);
+DEF_CLK(ipu1_clk, CCGR3, CG0, &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu1_di0_clk, CCGR3, CG1, &ipu1_di0_pre_clk, NULL);
+DEF_CLK(ipu1_di1_clk, CCGR3, CG2, &ipu1_di1_pre_clk, NULL);
+DEF_CLK(ipu2_clk, CCGR3, CG3, &mmdc_ch0_axi_clk, NULL);
+DEF_CLK(ipu2_di0_clk, CCGR3, CG4, &ipu2_di0_pre_clk, NULL);
+DEF_CLK(ipu2_di1_clk, CCGR3, CG5, &ipu2_di1_pre_clk, NULL);
+DEF_CLK(ldb_di0_clk, CCGR3, CG6, &pll3_pfd_540m, NULL);
+DEF_CLK(ldb_di1_clk, CCGR3, CG7, &pll3_pfd_540m, NULL);
+DEF_CLK(hsi_tx_clk, CCGR3, CG8, &pll2_pfd_400m, NULL);
+DEF_CLK(mlb_clk, CCGR3, CG9, &pll6_mlb, NULL);
+DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk, NULL);
+DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk, &mmdc_ch0_ipg_clk);
+DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk, NULL);
+DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk, &mmdc_ch1_ipg_clk);
+DEF_CLK(openvg_axi_clk, CCGR3, CG13, &axi_clk, NULL);
+DEF_CLK(pwm1_clk, CCGR4, CG8, &ipg_perclk, NULL);
+DEF_CLK(pwm2_clk, CCGR4, CG9, &ipg_perclk, NULL);
+DEF_CLK(pwm3_clk, CCGR4, CG10, &ipg_perclk, NULL);
+DEF_CLK(pwm4_clk, CCGR4, CG11, &ipg_perclk, NULL);
+DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk, NULL);
+DEF_CLK(gpmi_bch_clk, CCGR4, CG13, &usdhc4_clk, &gpmi_bch_apb_clk);
+DEF_CLK(gpmi_apb_clk, CCGR4, CG15, &usdhc3_clk, &gpmi_bch_clk);
+DEF_CLK(gpmi_io_clk, CCGR4, CG14, &enfc_clk, &gpmi_apb_clk);
+DEF_CLK(sdma_clk, CCGR5, CG3, &ahb_clk, NULL);
+DEF_CLK(spba_clk, CCGR5, CG6, &ipg_clk, NULL);
+DEF_CLK(spdif_clk, CCGR5, CG7, &pll3_usb_otg, &spba_clk);
+DEF_CLK(ssi1_clk, CCGR5, CG9, &pll3_pfd_508m, NULL);
+DEF_CLK(ssi2_clk, CCGR5, CG10, &pll3_pfd_508m, NULL);
+DEF_CLK(ssi3_clk, CCGR5, CG11, &pll3_pfd_508m, NULL);
+DEF_CLK(uart_serial_clk, CCGR5, CG13, &pll3_usb_otg, NULL);
+DEF_CLK(uart_clk, CCGR5, CG12, &pll3_80m, &uart_serial_clk);
+DEF_CLK(usboh3_clk, CCGR6, CG0, &ipg_clk, NULL);
+DEF_CLK(usdhc1_clk, CCGR6, CG1, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc2_clk, CCGR6, CG2, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc3_clk, CCGR6, CG3, &pll2_pfd_400m, NULL);
+DEF_CLK(usdhc4_clk, CCGR6, CG4, &pll2_pfd_400m, NULL);
+DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL);
+DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL);
+DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL);
+
+static int pcie_clk_enable(struct clk *clk)
+{
+ u32 val;
+
+ val = readl_relaxed(PLL8_ENET);
+ val |= BM_PLL_ENET_EN_PCIE;
+ writel_relaxed(val, PLL8_ENET);
+
+ return _clk_enable(clk);
+}
+
+static void pcie_clk_disable(struct clk *clk)
+{
+ u32 val;
+
+ _clk_disable(clk);
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= BM_PLL_ENET_EN_PCIE;
+ writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk pcie_clk = {
+ .enable_reg = CCGR4,
+ .enable_shift = CG0,
+ .enable = pcie_clk_enable,
+ .disable = pcie_clk_disable,
+ .set_parent = _clk_set_parent,
+ .parent = &axi_clk,
+ .secondary = &pll8_enet,
+};
+
+static int sata_clk_enable(struct clk *clk)
+{
+ u32 val;
+
+ val = readl_relaxed(PLL8_ENET);
+ val |= BM_PLL_ENET_EN_SATA;
+ writel_relaxed(val, PLL8_ENET);
+
+ return _clk_enable(clk);
+}
+
+static void sata_clk_disable(struct clk *clk)
+{
+ u32 val;
+
+ _clk_disable(clk);
+
+ val = readl_relaxed(PLL8_ENET);
+ val &= BM_PLL_ENET_EN_SATA;
+ writel_relaxed(val, PLL8_ENET);
+}
+
+static struct clk sata_clk = {
+ .enable_reg = CCGR5,
+ .enable_shift = CG2,
+ .enable = sata_clk_enable,
+ .disable = sata_clk_disable,
+ .parent = &ipg_clk,
+ .secondary = &pll8_enet,
+};
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ }
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
+ _REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
+ _REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
+ _REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
+ _REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
+ _REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
+ _REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
+ _REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
+ _REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
+ _REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
+ _REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
+ _REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
+ _REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
+ _REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
+ _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
+ _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
+ _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+ _REGISTER_CLOCK(NULL, "ckih", ckih_clk),
+ _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
+ _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
+ _REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
+ _REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
+ _REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
+ _REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
+ _REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
+ _REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
+ _REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
+ _REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
+ _REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
+ _REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
+ _REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
+ _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
+ _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
+ _REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
+};
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+ u32 val = readl_relaxed(CLPCR);
+
+ val &= ~BM_CLPCR_LPM;
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ val |= 0x1 << BP_CLPCR_LPM;
+ break;
+ case STOP_POWER_ON:
+ val |= 0x2 << BP_CLPCR_LPM;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ val |= 0x1 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+ break;
+ case STOP_POWER_OFF:
+ val |= 0x2 << BP_CLPCR_LPM;
+ val |= 0x3 << BP_CLPCR_STBY_COUNT;
+ val |= BM_CLPCR_VSTBY;
+ val |= BM_CLPCR_SBYOS;
+ val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+ break;
+ default:
+ return -EINVAL;
+ }
+ writel_relaxed(val, CLPCR);
+
+ return 0;
+}
+
+static struct map_desc imx6q_clock_desc[] = {
+ imx_map_entry(MX6Q, CCM, MT_DEVICE),
+ imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
+};
+
+int __init mx6q_clocks_init(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ int i, irq;
+
+ iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ external_low_reference = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ external_high_reference = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ oscillator_reference = rate;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+
+ /* only keep necessary clocks on */
+ writel_relaxed(0x3 << CG0 | 0x3 << CG1 | 0x3 << CG2, CCGR0);
+ writel_relaxed(0x3 << CG8 | 0x3 << CG9 | 0x3 << CG10, CCGR2);
+ writel_relaxed(0x3 << CG10 | 0x3 << CG12, CCGR3);
+ writel_relaxed(0x3 << CG4 | 0x3 << CG6 | 0x3 << CG7, CCGR4);
+ writel_relaxed(0x3 << CG0, CCGR5);
+ writel_relaxed(0, CCGR6);
+ writel_relaxed(0, CCGR7);
+
+ clk_enable(&uart_clk);
+ clk_enable(&mmdc_ch0_axi_clk);
+
+ clk_set_rate(&pll4_audio, FREQ_650M);
+ clk_set_rate(&pll5_video, FREQ_650M);
+ clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
+ clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
+ clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
+ clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
+ clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
+ clk_set_rate(&gpu3d_core_clk, FREQ_528M);
+ clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
+ clk_set_rate(&asrc_serial_clk, 1500000);
+ clk_set_rate(&enfc_clk, 11000000);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+ mxc_timer_init(&gpt_clk, base, irq);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/cpu-imx25.c b/arch/arm/mach-imx/cpu-imx25.c
new file mode 100644
index 0000000..6914bcb
--- /dev/null
+++ b/arch/arm/mach-imx/cpu-imx25.c
@@ -0,0 +1,41 @@
+/*
+ * MX25 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+static int mx25_cpu_rev = -1;
+
+static int mx25_read_cpu_rev(void)
+{
+ u32 rev;
+
+ rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
+ switch (rev) {
+ case 0x00:
+ return IMX_CHIP_REVISION_1_0;
+ case 0x01:
+ return IMX_CHIP_REVISION_1_1;
+ default:
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
+}
+
+int mx25_revision(void)
+{
+ if (mx25_cpu_rev == -1)
+ mx25_cpu_rev = mx25_read_cpu_rev();
+
+ return mx25_cpu_rev;
+}
+EXPORT_SYMBOL(mx25_revision);
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index 3b117be..ff38e15 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -26,12 +26,12 @@
#include <mach/hardware.h>
-static int cpu_silicon_rev = -1;
-static int cpu_partnumber;
+static int mx27_cpu_rev = -1;
+static int mx27_cpu_partnumber;
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
-static void query_silicon_parameter(void)
+static int mx27_read_cpu_rev(void)
{
u32 val;
/*
@@ -42,20 +42,18 @@
val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ SYS_CHIP_ID));
+ mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+
switch (val >> 28) {
case 0:
- cpu_silicon_rev = IMX_CHIP_REVISION_1_0;
- break;
+ return IMX_CHIP_REVISION_1_0;
case 1:
- cpu_silicon_rev = IMX_CHIP_REVISION_2_0;
- break;
+ return IMX_CHIP_REVISION_2_0;
case 2:
- cpu_silicon_rev = IMX_CHIP_REVISION_2_1;
- break;
+ return IMX_CHIP_REVISION_2_1;
default:
- cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN;
+ return IMX_CHIP_REVISION_UNKNOWN;
}
- cpu_partnumber = (int)((val >> 12) & 0xFFFF);
}
/*
@@ -65,12 +63,12 @@
*/
int mx27_revision(void)
{
- if (cpu_silicon_rev == -1)
- query_silicon_parameter();
+ if (mx27_cpu_rev == -1)
+ mx27_cpu_rev = mx27_read_cpu_rev();
- if (cpu_partnumber != 0x8821)
+ if (mx27_cpu_partnumber != 0x8821)
return -EINVAL;
- return cpu_silicon_rev;
+ return mx27_cpu_rev;
}
EXPORT_SYMBOL(mx27_revision);
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index a378070..3f2345f 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -13,45 +13,50 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/iim.h>
+#include <mach/common.h>
-unsigned int mx31_cpu_rev;
-EXPORT_SYMBOL(mx31_cpu_rev);
+static int mx31_cpu_rev = -1;
static struct {
u8 srev;
const char *name;
- const char *v;
unsigned int rev;
-} mx31_cpu_type[] __initdata = {
- { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 },
- { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
- { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
- { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
- { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
- { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
+} mx31_cpu_type[] = {
+ { .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 },
+ { .srev = 0x10, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x11, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x12, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x13, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x14, .name = "i.MX31", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x15, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x28, .name = "i.MX31", .rev = IMX_CHIP_REVISION_2_0 },
+ { .srev = 0x29, .name = "i.MX31L", .rev = IMX_CHIP_REVISION_2_0 },
};
-void __init mx31_read_cpu_rev(void)
+static int mx31_read_cpu_rev(void)
{
u32 i, srev;
/* read SREV register from IIM module */
srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+ srev &= 0xff;
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
- printk(KERN_INFO
- "CPU identified as %s, silicon rev %s\n",
- mx31_cpu_type[i].name, mx31_cpu_type[i].v);
-
- mx31_cpu_rev = mx31_cpu_type[i].rev;
- return;
+ imx_print_silicon_rev(mx31_cpu_type[i].name,
+ mx31_cpu_type[i].rev);
+ return mx31_cpu_type[i].rev;
}
- mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-
- printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+ imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN);
+ return IMX_CHIP_REVISION_UNKNOWN;
}
+
+int mx31_revision(void)
+{
+ if (mx31_cpu_rev == -1)
+ mx31_cpu_rev = mx31_read_cpu_rev();
+
+ return mx31_cpu_rev;
+}
+EXPORT_SYMBOL(mx31_revision);
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index 6637cd8..846e46e 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -13,32 +13,30 @@
#include <mach/hardware.h>
#include <mach/iim.h>
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
+static int mx35_cpu_rev = -1;
-void __init mx35_read_cpu_rev(void)
+static int mx35_read_cpu_rev(void)
{
u32 rev;
- char *srev;
rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
switch (rev) {
case 0x00:
- mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
- srev = "1.0";
- break;
+ return IMX_CHIP_REVISION_1_0;
case 0x10:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
- srev = "2.0";
- break;
+ return IMX_CHIP_REVISION_2_0;
case 0x11:
- mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
- srev = "2.1";
- break;
+ return IMX_CHIP_REVISION_2_1;
default:
- mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
- srev = "unknown";
+ return IMX_CHIP_REVISION_UNKNOWN;
}
-
- printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
}
+
+int mx35_revision(void)
+{
+ if (mx35_cpu_rev == -1)
+ mx35_cpu_rev = mx35_read_cpu_rev();
+
+ return mx35_cpu_rev;
+}
+EXPORT_SYMBOL(mx35_revision);
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 7f97a3c..2f727d7 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -76,3 +76,7 @@
#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata)
#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata)
#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx27_pata_imx_data;
+#define imx27_add_pata_imx() \
+ imx_add_pata_imx(&imx27_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index dbe940d..488e241 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -78,3 +78,7 @@
#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata)
#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata)
#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx31_pata_imx_data;
+#define imx31_add_pata_imx() \
+ imx_add_pata_imx(&imx31_pata_imx_data)
diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h
index 234cbd3..7b99ef0 100644
--- a/arch/arm/mach-imx/devices-imx35.h
+++ b/arch/arm/mach-imx/devices-imx35.h
@@ -81,3 +81,7 @@
imx_add_spi_imx(&imx35_cspi_data[id], pdata)
#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata)
#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata)
+
+extern const struct imx_pata_imx_data imx35_pata_imx_data;
+#define imx35_add_pata_imx() \
+ imx_add_pata_imx(&imx35_pata_imx_data)
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
new file mode 100644
index 0000000..e1537f9
--- /dev/null
+++ b/arch/arm/mach-imx/gpc.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/hardware/gic.h>
+
+#define GPC_IMR1 0x008
+#define GPC_PGC_CPU_PDN 0x2a0
+
+#define IMR_NUM 4
+
+static void __iomem *gpc_base;
+static u32 gpc_wake_irqs[IMR_NUM];
+static u32 gpc_saved_imrs[IMR_NUM];
+
+void imx_gpc_pre_suspend(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ /* Tell GPC to power off ARM core when suspend */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_CPU_PDN);
+
+ for (i = 0; i < IMR_NUM; i++) {
+ gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+ writel_relaxed(~gpc_wake_irqs[i], reg_imr1 + i * 4);
+ }
+}
+
+void imx_gpc_post_resume(void)
+{
+ void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+ int i;
+
+ /* Keep ARM core powered on for other low-power modes */
+ writel_relaxed(0x0, gpc_base + GPC_PGC_CPU_PDN);
+
+ for (i = 0; i < IMR_NUM; i++)
+ writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
+static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ unsigned int idx = d->irq / 32 - 1;
+ u32 mask;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return -EINVAL;
+
+ mask = 1 << d->irq % 32;
+ gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
+ gpc_wake_irqs[idx] & ~mask;
+
+ return 0;
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+ void __iomem *reg;
+ u32 val;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return;
+
+ reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+ val = readl_relaxed(reg);
+ val &= ~(1 << d->irq % 32);
+ writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
+ void __iomem *reg;
+ u32 val;
+
+ /* Sanity check for SPI irq */
+ if (d->irq < 32)
+ return;
+
+ reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+ val = readl_relaxed(reg);
+ val |= 1 << (d->irq % 32);
+ writel_relaxed(val, reg);
+}
+
+void __init imx_gpc_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+ gpc_base = of_iomap(np, 0);
+ WARN_ON(!gpc_base);
+
+ /* Register GPC as the secondary interrupt controller behind GIC */
+ gic_arch_extn.irq_mask = imx_gpc_irq_mask;
+ gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
+ gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+}
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
new file mode 100644
index 0000000..6229efb
--- /dev/null
+++ b/arch/arm/mach-imx/head-v7.S
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+ .section ".text.head", "ax"
+ __CPUINIT
+
+/*
+ * The secondary kernel init calls v7_flush_dcache_all before it enables
+ * the L1; however, the L1 comes out of reset in an undefined state, so
+ * the clean + invalidate performed by v7_flush_dcache_all causes a bunch
+ * of cache lines with uninitialized data and uninitialized tags to get
+ * written out to memory, which does really unpleasant things to the main
+ * processor. We fix this by performing an invalidate, rather than a
+ * clean + invalidate, before jumping into the kernel.
+ *
+ * This funciton is cloned from arch/arm/mach-tegra/headsmp.S, and needs
+ * to be called for both secondary cores startup and primary core resume
+ * procedures. Ideally, it should be moved into arch/arm/mm/cache-v7.S.
+ */
+ENTRY(v7_invalidate_l1)
+ mov r0, #0
+ mcr p15, 2, r0, c0, c0, 0
+ mrc p15, 1, r0, c0, c0, 0
+
+ ldr r1, =0x7fff
+ and r2, r1, r0, lsr #13
+
+ ldr r1, =0x3ff
+
+ and r3, r1, r0, lsr #3 @ NumWays - 1
+ add r2, r2, #1 @ NumSets
+
+ and r0, r0, #0x7
+ add r0, r0, #4 @ SetShift
+
+ clz r1, r3 @ WayShift
+ add r4, r3, #1 @ NumWays
+1: sub r2, r2, #1 @ NumSets--
+ mov r3, r4 @ Temp = NumWays
+2: subs r3, r3, #1 @ Temp--
+ mov r5, r3, lsl r1
+ mov r6, r2, lsl r0
+ orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
+ mcr p15, 0, r5, c7, c6, 2
+ bgt 2b
+ cmp r2, #0
+ bgt 1b
+ dsb
+ isb
+ mov pc, lr
+ENDPROC(v7_invalidate_l1)
+
+#ifdef CONFIG_SMP
+ENTRY(v7_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(v7_secondary_startup)
+#endif
+
+/*
+ * The following code is located into the .data section. This is to
+ * allow phys_l2x0_saved_regs to be accessed with a relative load
+ * as we are running on physical address here.
+ */
+ .data
+ .align
+
+ .macro pl310_resume
+ ldr r2, phys_l2x0_saved_regs
+ ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
+ ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
+ str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
+ mov r1, #0x1
+ str r1, [r0, #L2X0_CTRL] @ re-enable L2
+ .endm
+
+ENTRY(v7_cpu_resume)
+ bl v7_invalidate_l1
+ pl310_resume
+ b cpu_resume
+ENDPROC(v7_cpu_resume)
+
+ .globl phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+ .long 0
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
new file mode 100644
index 0000000..89493ab
--- /dev/null
+++ b/arch/arm/mach-imx/hotplug.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/errno.h>
+#include <asm/cacheflush.h>
+#include <mach/common.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ flush_cache_all();
+ imx_enable_cpu(cpu, false);
+ cpu_do_idle();
+
+ /* We should never return from idle */
+ panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
new file mode 100644
index 0000000..d4ab6f2
--- /dev/null
+++ b/arch/arm/mach-imx/lluart.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART
+ .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
+ .length = MX6Q_UART4_SIZE,
+ .type = MT_DEVICE,
+#endif
+};
+
+void __init imx_lluart_map_io(void)
+{
+ if (imx_lluart_desc.virtual)
+ iotable_init(&imx_lluart_desc, 1);
+}
diff --git a/arch/arm/mach-imx/localtimer.c b/arch/arm/mach-imx/localtimer.c
new file mode 100644
index 0000000..3a16351
--- /dev/null
+++ b/arch/arm/mach-imx/localtimer.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/smp_twd.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
+ if (!twd_base) {
+ twd_base = of_iomap(np, 0);
+ WARN_ON(!twd_base);
+ }
+ evt->irq = irq_of_parse_and_map(np, 0);
+ twd_timer_setup(evt);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index a404c89..1e486e6 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -136,6 +136,7 @@
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &apf9328_timer,
.init_machine = apf9328_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 2152590..c9a9cf6 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -314,25 +314,19 @@
},
};
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+static const struct physmap_flash_data
+ armadillo5x0_nor_flash_pdata __initconst = {
.width = 2,
.parts = armadillo5x0_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
};
-static struct resource armadillo5x0_nor_flash_resource = {
+static const struct resource armadillo5x0_nor_flash_resource __initconst = {
.flags = IORESOURCE_MEM,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
-static struct platform_device armadillo5x0_nor_flash = {
- .name = "physmap-flash",
- .id = -1,
- .num_resources = 1,
- .resource = &armadillo5x0_nor_flash_resource,
-};
-
/*
* FB support
*/
@@ -514,8 +508,10 @@
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
/* Register NOR Flash */
- mxc_register_device(&armadillo5x0_nor_flash,
- &armadillo5x0_nor_flash_pdata);
+ platform_device_register_resndata(NULL, "physmap-flash", -1,
+ &armadillo5x0_nor_flash_resource, 1,
+ &armadillo5x0_nor_flash_pdata,
+ sizeof(armadillo5x0_nor_flash_pdata));
/* Register NAND Flash */
imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
@@ -562,6 +558,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &armadillo5x0_timer,
.init_machine = armadillo5x0_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index f494705..313f62d 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -62,6 +62,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &bug_timer,
.init_machine = bug_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index b1ec2cf..edb3730 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -315,6 +315,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &eukrea_cpuimx27_timer,
.init_machine = eukrea_cpuimx27_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 470b654..66af2e8 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -66,7 +66,7 @@
I2C_BOARD_INFO("tsc2007", 0x48),
.type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = gpio_to_irq(TSC2007_IRQGPIO),
+ .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
};
@@ -198,6 +198,7 @@
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &eukrea_cpuimx35_timer,
.init_machine = eukrea_cpuimx35_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 9163318..ab8fbcc 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -167,6 +167,7 @@
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
+ .handle_irq = imx25_handle_irq,
.timer = &eukrea_cpuimx25_timer,
.init_machine = eukrea_cpuimx25_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 22306ce..38eb9e4 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -279,6 +279,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &visstrim_m10_timer,
.init_machine = visstrim_m10_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 8da48b3..7052155 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -75,6 +75,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27ipcam_timer,
.init_machine = mx27ipcam_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 21a14a2..8d6a635 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -81,6 +81,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27lite_timer,
.init_machine = mx27lite_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
new file mode 100644
index 0000000..8bf5fa3
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __init imx6q_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
+ imx6q_pm_init();
+}
+
+static void __init imx6q_map_io(void)
+{
+ imx_lluart_map_io();
+ imx_scu_map_io();
+}
+
+static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 7; /* imx6q gets 7 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx6q_irq_match[] __initconst = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static void __init imx6q_init_irq(void)
+{
+ l2x0_of_init(0, ~0UL);
+ imx_src_init();
+ imx_gpc_init();
+ of_irq_init(imx6q_irq_match);
+}
+
+static void __init imx6q_timer_init(void)
+{
+ mx6q_clocks_init();
+}
+
+static struct sys_timer imx6q_timer = {
+ .init = imx6q_timer_init,
+};
+
+static const char *imx6q_dt_compat[] __initdata = {
+ "fsl,imx6q-sabreauto",
+ NULL,
+};
+
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+ .map_io = imx6q_map_io,
+ .init_irq = imx6q_init_irq,
+ .handle_irq = imx6q_handle_irq,
+ .timer = &imx6q_timer,
+ .init_machine = imx6q_init_machine,
+ .dt_compat = imx6q_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 7c20e9e..5f37f89 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -36,6 +36,7 @@
#include <mach/clock.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/iomux-mx3.h>
#include "devices-imx31.h"
@@ -275,6 +276,7 @@
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &kzm_timer,
.init_machine = kzm_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 530ea08..fc49785 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -68,23 +68,16 @@
* Physmap flash
*/
-static struct physmap_flash_data mx1ads_flash_data = {
+static const struct physmap_flash_data mx1ads_flash_data __initconst = {
.width = 4, /* bankwidth in bytes */
};
-static struct resource flash_resource = {
+static const struct resource flash_resource __initconst = {
.start = MX1_CS0_PHYS,
.end = MX1_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .resource = &flash_resource,
- .num_resources = 1,
-};
-
/*
* I2C
*/
@@ -125,7 +118,9 @@
imx1_add_imx_uart1(&uart1_pdata);
/* Physmap flash */
- mxc_register_device(&flash_device, &mx1ads_flash_data);
+ platform_device_register_resndata(NULL, "physmap-flash", 0,
+ &flash_resource, 1,
+ &mx1ads_flash_data, sizeof(mx1ads_flash_data));
/* I2C */
i2c_register_board_info(0, mx1ads_i2c_devices,
@@ -149,6 +144,7 @@
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
@@ -158,6 +154,7 @@
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index e56828d..25f8402 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -309,6 +309,7 @@
.map_io = mx21ads_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
+ .handle_irq = imx21_handle_irq,
.timer = &mx21ads_timer,
.init_machine = mx21ads_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index dd25ee8..88dccf1 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -43,6 +43,8 @@
#include "devices-imx25.h"
+#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
+
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -108,6 +110,11 @@
/* I2C1 */
MX25_PAD_I2C1_CLK__I2C1_CLK,
MX25_PAD_I2C1_DAT__I2C1_DAT,
+
+ /* CAN1 */
+ MX25_PAD_GPIO_A__CAN1_TX,
+ MX25_PAD_GPIO_B__CAN1_RX,
+ MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
@@ -240,6 +247,9 @@
imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
+
+ gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
+ imx25_add_flexcan0(NULL);
}
static void __init mx25pdk_timer_init(void)
@@ -257,6 +267,7 @@
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
+ .handle_irq = imx25_handle_irq,
.timer = &mx25pdk_timer,
.init_machine = mx25pdk_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 3772304..ba232d7 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -293,8 +293,7 @@
.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN |
- MC13783_USE_RTC,
+ .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC,
};
/* SPI */
@@ -357,7 +356,7 @@
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
- .irq = gpio_to_irq(PMIC_INT),
+ .irq = IMX_GPIO_TO_IRQ(PMIC_INT),
.mode = SPI_CS_HIGH,
}, {
.modalias = "l4f00242t03",
@@ -423,6 +422,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27pdk_timer,
.init_machine = mx27pdk_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 635b050..74dd573 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -348,6 +348,7 @@
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mx27ads_timer,
.init_machine = mx27ads_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 6484db5..b8c54b8 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -492,7 +492,7 @@
.regulators = mx31_3ds_regulators,
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
},
- .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
+ .flags = MC13XXX_USE_TOUCHSCREEN,
};
/* SPI */
@@ -540,7 +540,7 @@
mx31_3ds_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
-#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
.flash_bbt = 1,
#endif
};
@@ -766,6 +766,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31_3ds_timer,
.init_machine = mx31_3ds_init,
.reserve = mx31_3ds_reserve,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 910c456..9cc1a49 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -539,6 +539,7 @@
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31ads_timer,
.init_machine = mx31ads_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index e92eaf9..5defd8e 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -299,6 +299,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31lilly_timer,
.init_machine = mx31lilly_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 5242cb7..05f1c71 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -112,8 +112,7 @@
};
static struct mc13xxx_platform_data mc13783_pdata __initdata = {
- .flags = MC13XXX_USE_RTC |
- MC13XXX_USE_REGULATOR,
+ .flags = MC13XXX_USE_RTC,
};
static struct spi_board_info mc13783_spi_dev __initdata = {
@@ -284,6 +283,7 @@
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31lite_timer,
.init_machine = mx31lite_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 1d01ef2..07034f4 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -28,6 +28,10 @@
#include <linux/spi/spi.h>
#include <linux/types.h>
#include <linux/memblock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/input.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
@@ -222,7 +226,7 @@
},
};
-static struct mc13783_led_platform_data moboard_led[] = {
+static struct mc13xxx_led_platform_data moboard_led[] = {
{
.id = MC13783_LED_R1,
.name = "coreboard-led-4:red",
@@ -255,7 +259,7 @@
},
};
-static struct mc13783_leds_platform_data moboard_leds = {
+static struct mc13xxx_leds_platform_data moboard_leds = {
.num_leds = ARRAY_SIZE(moboard_led),
.led = moboard_led,
.flags = MC13783_LED_SLEWLIMTC,
@@ -264,14 +268,20 @@
.tc2_period = MC13783_LED_PERIOD_10MS,
};
+static struct mc13xxx_buttons_platform_data moboard_buttons = {
+ .b1on_flags = MC13783_BUTTON_DBNC_750MS | MC13783_BUTTON_ENABLE |
+ MC13783_BUTTON_POL_INVERT,
+ .b1on_key = KEY_POWER,
+};
+
static struct mc13xxx_platform_data moboard_pmic = {
.regulators = {
.regulators = moboard_regulators,
.num_regulators = ARRAY_SIZE(moboard_regulators),
},
.leds = &moboard_leds,
- .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC |
- MC13XXX_USE_ADC | MC13XXX_USE_LED,
+ .buttons = &moboard_buttons,
+ .flags = MC13XXX_USE_RTC | MC13XXX_USE_ADC,
};
static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -490,6 +500,18 @@
}
+static void mx31moboard_poweroff(void)
+{
+ struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
+
+ if (!IS_ERR(clk))
+ clk_enable(clk);
+
+ mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
+
+ __raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
static int mx31moboard_baseboard;
core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
@@ -528,6 +550,8 @@
moboard_usbh2_init();
+ pm_power_off = mx31moboard_poweroff;
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
@@ -572,6 +596,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &mx31moboard_timer,
.init_machine = mx31moboard_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index f2a873d..7a46202 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -221,6 +221,7 @@
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &mx35pdk_timer,
.init_machine = mx35_3ds_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 5ec3989..125c196 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -271,6 +271,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &mxt_td60_timer,
.init_machine = mxt_td60_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 0f6bd11..26072f4 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -439,6 +439,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.init_machine = pca100_init,
.timer = &pca100_timer,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 186d4eb..efd6b53 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -693,6 +693,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &pcm037_timer,
.init_machine = pcm037_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 091bcf8..a17e9c7 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -176,7 +176,9 @@
* setup other stuffs to access the sram. */
static void __init pcm038_init_sram(void)
{
- mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
+ __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
+ __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
+ __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
}
static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
@@ -266,8 +268,7 @@
.regulators = pcm038_regulators,
.num_regulators = ARRAY_SIZE(pcm038_regulators),
},
- .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
- MC13783_USE_TOUCHSCREEN,
+ .flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
};
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
@@ -353,6 +354,7 @@
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
+ .handle_irq = imx27_handle_irq,
.timer = &pcm038_timer,
.init_machine = pcm038_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 0a4d31d..7366c2a 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -422,6 +422,7 @@
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &pcm043_timer,
.init_machine = pcm043_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 9e11359..4ff5faf 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -190,7 +190,10 @@
static void __init qong_init_nand_mtd(void)
{
/* init CS */
- mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
+ __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+ __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+ __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+
mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
/* enable pin */
@@ -249,6 +252,7 @@
mxc_init_imx_uart();
qong_init_nor_mtd();
qong_init_fpga();
+ imx31_add_imx2_wdt(NULL);
}
static void __init qong_timer_init(void)
@@ -266,6 +270,7 @@
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
+ .handle_irq = imx31_handle_irq,
.timer = &qong_timer,
.init_machine = qong_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 85d3284..bb6e5b2 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -141,6 +141,7 @@
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
+ .handle_irq = imx1_handle_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 7d8e012..6909245 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -162,7 +162,7 @@
}, {
I2C_BOARD_INFO("mc13892", 0x08),
.platform_data = &vpr200_pmic,
- .irq = gpio_to_irq(GPIO_PMIC_INT),
+ .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
}
};
@@ -319,6 +319,7 @@
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
+ .handle_irq = imx35_handle_irq,
.timer = &vpr200_timer,
.init_machine = vpr200_board_init,
MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
new file mode 100644
index 0000000..9f0e82e
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/devices-common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/irqs.h>
+
+static void imx3_idle(void)
+{
+ unsigned long reg = 0;
+ __asm__ __volatile__(
+ /* disable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #0x00001000\n"
+ "bic %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ /* invalidate I cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c5, 0\n"
+ /* clear and invalidate D cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c14, 0\n"
+ /* WFI */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c0, 4\n"
+ "nop\n" "nop\n" "nop\n" "nop\n"
+ "nop\n" "nop\n" "nop\n"
+ /* enable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #0x00001000\n"
+ "orr %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : "=r" (reg));
+}
+
+static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
+ unsigned int mtype)
+{
+ if (mtype == MT_DEVICE) {
+ /*
+ * Access all peripherals below 0x80000000 as nonshared device
+ * on mx3, but leave l2cc alone. Otherwise cache corruptions
+ * can occur.
+ */
+ if (phys_addr < 0x80000000 &&
+ !addr_in_module(phys_addr, MX3x_L2CC))
+ mtype = MT_DEVICE_NONSHARED;
+ }
+
+ return __arm_ioremap(phys_addr, size, mtype);
+}
+
+void imx3_init_l2x0(void)
+{
+ void __iomem *l2x0_base;
+ void __iomem *clkctl_base;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+ clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+ if (clkctl_base != NULL) {
+ writel(0x00000515, clkctl_base + L2_MEM_VAL);
+ iounmap(clkctl_base);
+ } else {
+ pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+ }
+
+ l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+ if (IS_ERR(l2x0_base)) {
+ printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+ PTR_ERR(l2x0_base));
+ return;
+ }
+
+ l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+}
+
+static struct map_desc mx31_io_desc[] __initdata = {
+ imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+ iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+static struct map_desc mx35_io_desc[] __initdata = {
+ imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+ imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+ iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+ mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+ imx_idle = imx3_idle;
+ imx_ioremap = imx3_ioremap;
+}
+
+void __init imx35_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+ mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+ imx_idle = imx3_idle;
+ imx_ioremap = imx3_ioremap;
+}
+
+void __init mx31_init_irq(void)
+{
+ mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+ mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
+
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+ .per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 423,
+ .ap_2_bp_addr = 829,
+ .bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx31-to2.bin",
+ .script_addrs = &imx31_to2_sdma_script,
+};
+
+void __init imx31_soc_init(void)
+{
+ int to_version = mx31_revision() >> 4;
+
+ imx3_init_l2x0();
+
+ mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+ mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+ mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+ strlen(imx31_sdma_pdata.fw_name));
+ imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+}
+
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+ .ap_2_ap_addr = 642,
+ .uart_2_mcu_addr = 817,
+ .mcu_2_app_addr = 747,
+ .uartsh_2_mcu_addr = 1183,
+ .per_2_shp_addr = 1033,
+ .mcu_2_shp_addr = 961,
+ .ata_2_mcu_addr = 1333,
+ .mcu_2_ata_addr = 1252,
+ .app_2_mcu_addr = 683,
+ .shp_2_per_addr = 1111,
+ .shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+ .ap_2_ap_addr = 729,
+ .uart_2_mcu_addr = 904,
+ .per_2_app_addr = 1597,
+ .mcu_2_app_addr = 834,
+ .uartsh_2_mcu_addr = 1270,
+ .per_2_shp_addr = 1120,
+ .mcu_2_shp_addr = 1048,
+ .ata_2_mcu_addr = 1429,
+ .mcu_2_ata_addr = 1339,
+ .app_2_per_addr = 1531,
+ .app_2_mcu_addr = 770,
+ .shp_2_per_addr = 1198,
+ .shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+ .fw_name = "sdma-imx35-to2.bin",
+ .script_addrs = &imx35_to2_sdma_script,
+};
+
+void __init imx35_soc_init(void)
+{
+ int to_version = mx35_revision() >> 4;
+
+ imx3_init_l2x0();
+
+ /* i.mx35 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+ mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+ mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+ if (to_version == 1) {
+ strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
+ strlen(imx35_sdma_pdata.fw_name));
+ imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+ }
+
+ imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+}
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
deleted file mode 100644
index b7c55e7..0000000
--- a/arch/arm/mach-imx/mm-imx31.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx31_io_desc[] __initdata = {
- imx_map_entry(MX31, X_MEMC, MT_DEVICE),
- imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
- iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX31);
- mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-void __init mx31_init_irq(void)
-{
- mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
- .per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 423,
- .ap_2_bp_addr = 829,
- .bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
- .fw_name = "sdma-imx31-to2.bin",
- .script_addrs = &imx31_to2_sdma_script,
-};
-
-void __init imx31_soc_init(void)
-{
- int to_version = mx31_revision() >> 4;
-
- mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
- if (to_version == 1) {
- strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
- strlen(imx31_sdma_pdata.fw_name));
- imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
deleted file mode 100644
index f49bac7..0000000
--- a/arch/arm/mach-imx/mm-imx35.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx35_io_desc[] __initdata = {
- imx_map_entry(MX35, X_MEMC, MT_DEVICE),
- imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
- imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
- iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX35);
- mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-void __init mx35_init_irq(void)
-{
- mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
- .ap_2_ap_addr = 642,
- .uart_2_mcu_addr = 817,
- .mcu_2_app_addr = 747,
- .uartsh_2_mcu_addr = 1183,
- .per_2_shp_addr = 1033,
- .mcu_2_shp_addr = 961,
- .ata_2_mcu_addr = 1333,
- .mcu_2_ata_addr = 1252,
- .app_2_mcu_addr = 683,
- .shp_2_per_addr = 1111,
- .shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
- .ap_2_ap_addr = 729,
- .uart_2_mcu_addr = 904,
- .per_2_app_addr = 1597,
- .mcu_2_app_addr = 834,
- .uartsh_2_mcu_addr = 1270,
- .per_2_shp_addr = 1120,
- .mcu_2_shp_addr = 1048,
- .ata_2_mcu_addr = 1429,
- .mcu_2_ata_addr = 1339,
- .app_2_per_addr = 1531,
- .app_2_mcu_addr = 770,
- .shp_2_per_addr = 1198,
- .shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
- .fw_name = "sdma-imx35-to2.bin",
- .script_addrs = &imx35_to2_sdma_script,
-};
-
-void __init imx35_soc_init(void)
-{
- int to_version = mx35_revision() >> 4;
-
- /* i.mx35 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
- mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
- mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
- if (to_version == 1) {
- strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
- strlen(imx35_sdma_pdata.fw_name));
- imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
- }
-
- imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
-}
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
new file mode 100644
index 0000000..c461e98
--- /dev/null
+++ b/arch/arm/mach-imx/mmdc.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#define MMDC_MAPSR 0x404
+#define BP_MMDC_MAPSR_PSD 0
+#define BP_MMDC_MAPSR_PSS 4
+
+static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ void __iomem *mmdc_base, *reg;
+ u32 val;
+ int timeout = 0x400;
+
+ mmdc_base = of_iomap(np, 0);
+ WARN_ON(!mmdc_base);
+
+ reg = mmdc_base + MMDC_MAPSR;
+
+ /* Enable automatic power saving */
+ val = readl_relaxed(reg);
+ val &= ~(1 << BP_MMDC_MAPSR_PSD);
+ writel_relaxed(val, reg);
+
+ /* Ensure it's successfully enabled */
+ while (!(readl_relaxed(reg) & 1 << BP_MMDC_MAPSR_PSS) && --timeout)
+ cpu_relax();
+
+ if (unlikely(!timeout)) {
+ pr_warn("%s: failed to enable automatic power saving\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static struct of_device_id imx_mmdc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-mmdc", },
+ { /* sentinel */ }
+};
+
+static struct platform_driver imx_mmdc_driver = {
+ .driver = {
+ .name = "imx-mmdc",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_mmdc_dt_ids,
+ },
+ .probe = imx_mmdc_probe,
+};
+
+static int __init imx_mmdc_init(void)
+{
+ return platform_driver_register(&imx_mmdc_driver);
+}
+postcore_initcall(imx_mmdc_init);
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
new file mode 100644
index 0000000..ab98c6f
--- /dev/null
+++ b/arch/arm/mach-imx/platsmp.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/page.h>
+#include <asm/smp_scu.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+static void __iomem *scu_base;
+
+static struct map_desc scu_io_desc __initdata = {
+ /* .virtual and .pfn are run-time assigned */
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+};
+
+void __init imx_scu_map_io(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_io_desc.virtual = IMX_IO_P2V(base);
+ scu_io_desc.pfn = __phys_to_pfn(base);
+ iotable_init(&scu_io_desc, 1);
+
+ scu_base = IMX_IO_ADDRESS(base);
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ imx_set_cpu_jump(cpu, v7_secondary_startup);
+ imx_enable_cpu(cpu, true);
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ int i, ncores;
+
+ ncores = scu_get_core_count(scu_base);
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void imx_smp_prepare(void)
+{
+ scu_enable(scu_base);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+ imx_smp_prepare();
+}
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index acf1769..e455d2f 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -11,7 +11,7 @@
#include <linux/suspend.h>
#include <linux/io.h>
#include <mach/system.h>
-#include <mach/mx27.h>
+#include <mach/hardware.h>
static int mx27_suspend_enter(suspend_state_t state)
{
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
new file mode 100644
index 0000000..f20f191
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+extern unsigned long phys_l2x0_saved_regs;
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+ cpu_do_idle();
+ return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ imx6q_set_lpm(STOP_POWER_OFF);
+ imx_gpc_pre_suspend();
+ imx_set_cpu_jump(0, v7_cpu_resume);
+ /* Zzz ... */
+ cpu_suspend(0, imx6q_suspend_finish);
+ imx_smp_prepare();
+ imx_gpc_post_resume();
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+ .enter = imx6q_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_init(void)
+{
+ /*
+ * The l2x0 core code provides an infrastucture to save and restore
+ * l2x0 registers across suspend/resume cycle. But because imx6q
+ * retains L2 content during suspend and needs to resume L2 before
+ * MMU is enabled, it can only utilize register saving support and
+ * have to take care of restoring on its own. So we save physical
+ * address of the data structure used by l2x0 core to save registers,
+ * and later restore the necessary ones in imx6q resume entry.
+ */
+ phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
+
+ suspend_set_ops(&imx6q_pm_ops);
+}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
new file mode 100644
index 0000000..36cacbd
--- /dev/null
+++ b/arch/arm/mach-imx/src.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/unified.h>
+
+#define SRC_SCR 0x000
+#define SRC_GPR1 0x020
+#define BP_SRC_SCR_CORE1_RST 14
+#define BP_SRC_SCR_CORE1_ENABLE 22
+
+static void __iomem *src_base;
+
+void imx_enable_cpu(int cpu, bool enable)
+{
+ u32 mask, val;
+
+ mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+ val = readl_relaxed(src_base + SRC_SCR);
+ val = enable ? val | mask : val & ~mask;
+ writel_relaxed(val, src_base + SRC_SCR);
+}
+
+void imx_set_cpu_jump(int cpu, void *jump_addr)
+{
+ writel_relaxed(BSYM(virt_to_phys(jump_addr)),
+ src_base + SRC_GPR1 + cpu * 8);
+}
+
+void __init imx_src_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-src");
+ src_base = of_iomap(np, 0);
+ WARN_ON(!src_base);
+}
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 6f991c5..fd5e7b6 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,6 +179,25 @@
"High Speed" UART is n/c (as far as I can tell)
20 Pin ARM/Xscale JTAG interface on J2
+config MACH_DEVIXP
+ bool "Omicron DEVIXP"
+ help
+ Say 'Y' here if you want your kernel to support the DEVIXP
+ board from OMICRON electronics GmbH.
+
+config MACH_MICCPT
+ bool "Omicron MICCPT"
+ select PCI
+ help
+ Say 'Y' here if you want your kernel to support the MICCPT
+ board from OMICRON electronics GmbH.
+
+config MACH_MIC256
+ bool "Omicron MIC256"
+ help
+ Say 'Y' here if you want your kernel to support the MIC256
+ board from OMICRON electronics GmbH.
+
comment "IXP4xx Options"
config IXP4XX_INDIRECT_PCI
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index d807fc3..eded94c 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -10,6 +10,7 @@
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
+obj-pci-$(CONFIG_MACH_MICCPT) += miccpt-pci.o
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
@@ -25,6 +26,9 @@
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
+obj-$(CONFIG_MACH_DEVIXP) += omixp-setup.o
+obj-$(CONFIG_MACH_MICCPT) += omixp-setup.o
+obj-$(CONFIG_MACH_MIC256) += omixp-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 219d7c1..eb945a9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -41,7 +41,8 @@
* Some boards are using UART2 as console
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2())
+ machine_is_gateway7001() || machine_is_wg302v2() ||
+ machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
new file mode 100644
index 0000000..ca0bae7
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/miccpt-pci.c
+ *
+ * MICCPT board-level PCI initialization
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2006 OMICRON electronics GmbH
+ *
+ * Author: Michael Jochum <michael.jochum@omicron.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#define MAX_DEV 4
+#define IRQ_LINES 4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA 1
+#define INTB 2
+#define INTC 3
+#define INTD 4
+
+
+void __init miccpt_pci_preinit(void)
+{
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[IRQ_LINES] = {
+ IXP4XX_GPIO_IRQ(INTA),
+ IXP4XX_GPIO_IRQ(INTB),
+ IXP4XX_GPIO_IRQ(INTC),
+ IXP4XX_GPIO_IRQ(INTD)
+ };
+
+ if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+ return pci_irq_table[(slot + pin - 2) % 4];
+
+ return -1;
+}
+
+struct hw_pci miccpt_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = miccpt_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = miccpt_map_irq,
+};
+
+int __init miccpt_pci_init(void)
+{
+ if (machine_is_miccpt())
+ pci_common_init(&miccpt_pci);
+ return 0;
+}
+
+subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
new file mode 100644
index 0000000..3b6a81a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-ixp4xx/omixp-setup.c
+ *
+ * omicron ixp4xx board setup
+ * Copyright (C) 2009 OMICRON electronics GmbH
+ *
+ * based nslu2-setup.c, ixdp425-setup.c:
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#ifdef CONFIG_LEDS_CLASS
+#include <linux/leds.h>
+#endif
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct resource omixp_flash_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mtd_partition omixp_partitions[] = {
+ {
+ .name = "Recovery Bootloader",
+ .size = 0x00020000,
+ .offset = 0,
+ }, {
+ .name = "Calibration Data",
+ .size = 0x00020000,
+ .offset = 0x00020000,
+ }, {
+ .name = "Recovery FPGA",
+ .size = 0x00020000,
+ .offset = 0x00040000,
+ }, {
+ .name = "Release Bootloader",
+ .size = 0x00020000,
+ .offset = 0x00060000,
+ }, {
+ .name = "Release FPGA",
+ .size = 0x00020000,
+ .offset = 0x00080000,
+ }, {
+ .name = "Kernel",
+ .size = 0x00160000,
+ .offset = 0x000a0000,
+ }, {
+ .name = "Filesystem",
+ .size = 0x00C00000,
+ .offset = 0x00200000,
+ }, {
+ .name = "Persistent Storage",
+ .size = 0x00200000,
+ .offset = 0x00E00000,
+ },
+};
+
+static struct flash_platform_data omixp_flash_data[] = {
+ {
+ .map_name = "cfi_probe",
+ .parts = omixp_partitions,
+ .nr_parts = ARRAY_SIZE(omixp_partitions),
+ }, {
+ .map_name = "cfi_probe",
+ .parts = NULL,
+ .nr_parts = 0,
+ },
+};
+
+static struct platform_device omixp_flash_device[] = {
+ {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &omixp_flash_data[0],
+ },
+ .resource = &omixp_flash_resources[0],
+ .num_resources = 1,
+ }, {
+ .name = "IXP4XX-Flash",
+ .id = 1,
+ .dev = {
+ .platform_data = &omixp_flash_data[1],
+ },
+ .resource = &omixp_flash_resources[1],
+ .num_resources = 1,
+ },
+};
+
+/* Swap UART's - These boards have the console on UART2. The following
+ * configuration is used:
+ * ttyS0 .. UART2
+ * ttyS1 .. UART1
+ * This way standard images can be used with the kernel that expect
+ * the console on ttyS0.
+ */
+static struct resource omixp_uart_resources[] = {
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct plat_serial8250_port omixp_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ }, {
+ /* list termination */
+ }
+};
+
+static struct platform_device omixp_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = omixp_uart_data,
+ .num_resources = 2,
+ .resource = omixp_uart_resources,
+};
+
+static struct gpio_led mic256_led_pins[] = {
+ {
+ .name = "LED-A",
+ .gpio = 7,
+ },
+};
+
+static struct gpio_led_platform_data mic256_led_data = {
+ .num_leds = ARRAY_SIZE(mic256_led_pins),
+ .leds = mic256_led_pins,
+};
+
+static struct platform_device mic256_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &mic256_led_data,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 20,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 21,
+ },
+};
+
+static struct platform_device ixdp425_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = ixdp425_plat_eth,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = ixdp425_plat_eth + 1,
+ },
+};
+
+
+static struct platform_device *devixp_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *mic256_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &mic256_leds,
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static struct platform_device *miccpt_pldev[] __initdata = {
+ &omixp_uart,
+ &omixp_flash_device[0],
+ &omixp_flash_device[1],
+ &ixdp425_eth[0],
+ &ixdp425_eth[1],
+};
+
+static void __init omixp_init(void)
+{
+ ixp4xx_sys_init();
+
+ /* 16MiB Boot Flash */
+ omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
+ omixp_flash_resources[0].end = IXP4XX_EXP_BUS_END(0);
+
+ /* 32 MiB Data Flash */
+ omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+ omixp_flash_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+ if (machine_is_devixp())
+ platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
+ else if (machine_is_miccpt())
+ platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
+ else if (machine_is_mic256())
+ platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
+}
+
+#ifdef CONFIG_MACH_DEVIXP
+MACHINE_START(DEVIXP, "Omicron DEVIXP")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICCPT
+MACHINE_START(MICCPT, "Omicron MICCPT")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MIC256
+MACHINE_START(MIC256, "Omicron MIC256")
+ .atag_offset = 0x100,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .init_machine = omixp_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 56ef5f6..323d4c9 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -77,7 +77,7 @@
Say 'Y' here if you want to support the Marvell PXA168-based
Teton BGA Development Board.
-config MACH_SHEEVAD
+config MACH_GPLUGD
bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
select CPU_PXA168
help
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index b0ac942..8f948f9 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -19,4 +19,4 @@
obj-$(CONFIG_MACH_FLINT) += flint.o
obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o
-obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o
+obj-$(CONFIG_MACH_GPLUGD) += gplugd.o
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index 3143e99..149b30c 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -30,7 +30,7 @@
#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APBC_##_reg, \
+ .clk_rst = APBC_##_reg, \
.fnclksel = _fnclksel, \
.rate = _rate, \
.ops = &apbc_clk_ops, \
@@ -38,7 +38,7 @@
#define APBC_CLK_OPS(_name, _reg, _fnclksel, _rate, _ops) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APBC_##_reg, \
+ .clk_rst = APBC_##_reg, \
.fnclksel = _fnclksel, \
.rate = _rate, \
.ops = _ops, \
@@ -46,7 +46,7 @@
#define APMU_CLK(_name, _reg, _eval, _rate) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APMU_##_reg, \
+ .clk_rst = APMU_##_reg, \
.enable_val = _eval, \
.rate = _rate, \
.ops = &apmu_clk_ops, \
@@ -54,7 +54,7 @@
#define APMU_CLK_OPS(_name, _reg, _eval, _rate, _ops) \
struct clk clk_##_name = { \
- .clk_rst = (void __iomem *)APMU_##_reg, \
+ .clk_rst = APMU_##_reg, \
.enable_val = _eval, \
.rate = _rate, \
.ops = _ops, \
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index 0ec0ca8..5720674 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -27,12 +27,12 @@
static struct map_desc standard_io_desc[] __initdata = {
{
.pfn = __phys_to_pfn(APB_PHYS_BASE),
- .virtual = APB_VIRT_BASE,
+ .virtual = (unsigned long)APB_VIRT_BASE,
.length = APB_PHYS_SIZE,
.type = MT_DEVICE,
}, {
.pfn = __phys_to_pfn(AXI_PHYS_BASE),
- .virtual = AXI_VIRT_BASE,
+ .virtual = (unsigned long)AXI_VIRT_BASE,
.length = AXI_PHYS_SIZE,
.type = MT_DEVICE,
},
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 32776f3..6915656 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -188,7 +188,7 @@
pxa168_add_eth(&gplugd_eth_platform_data);
}
-MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform")
+MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
.map_io = mmp_map_io,
.nr_irqs = IRQ_BOARD_START,
.init_irq = pxa168_init_irq,
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/include/mach/addr-map.h
index 3254089..3e404ac 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/include/mach/addr-map.h
@@ -11,6 +11,12 @@
#ifndef __ASM_MACH_ADDR_MAP_H
#define __ASM_MACH_ADDR_MAP_H
+#ifndef __ASSEMBLER__
+#define IOMEM(x) ((void __iomem *)(x))
+#else
+#define IOMEM(x) (x)
+#endif
+
/* APB - Application Subsystem Peripheral Bus
*
* NOTE: the DMA controller registers are actually on the AXI fabric #1
@@ -18,11 +24,11 @@
* peripherals on APB, let's count it into the ABP mapping area.
*/
#define APB_PHYS_BASE 0xd4000000
-#define APB_VIRT_BASE 0xfe000000
+#define APB_VIRT_BASE IOMEM(0xfe000000)
#define APB_PHYS_SIZE 0x00200000
#define AXI_PHYS_BASE 0xd4200000
-#define AXI_VIRT_BASE 0xfe200000
+#define AXI_VIRT_BASE IOMEM(0xfe200000)
#define AXI_PHYS_SIZE 0x00200000
/* Static Memory Controller - Chip Select 0 and 1 */
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index c017a98..d14eeaf 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -7,7 +7,7 @@
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 65d8689e..7a7e8e4 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -86,7 +86,8 @@
void mmp2_clear_pmic_int(void)
{
- unsigned long mfpr_pmic, data;
+ void __iomem *mfpr_pmic;
+ unsigned long data;
mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
data = __raw_readl(mfpr_pmic);
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 106170f..cf38e22 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -8,18 +8,16 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/memblock.h>
#include <asm/mach-types.h>
@@ -70,6 +68,41 @@
{
}
+#ifdef CONFIG_OF
+static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
+ {}
+};
+
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+ { .compatible = "qcom,msm-8660-qgic", },
+ {}
+};
+
+static void __init msm8x60_dt_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_matching_node_by_address(NULL, msm_dt_gic_match,
+ MSM8X60_QGIC_DIST_PHYS);
+ if (node)
+ irq_domain_add_simple(node, GIC_SPI_START);
+
+ if (of_machine_is_compatible("qcom,msm8660-surf")) {
+ printk(KERN_INFO "Init surf UART registers\n");
+ msm8x60_init_uart12dm();
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ msm_auxdata_lookup, NULL);
+}
+
+static const char *msm8x60_fluid_match[] __initdata = {
+ "qcom,msm8660-fluid",
+ "qcom,msm8660-surf",
+ NULL
+};
+#endif /* CONFIG_OF */
+
MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
.fixup = msm8x60_fixup,
.reserve = msm8x60_reserve,
@@ -105,3 +138,14 @@
.init_machine = msm8x60_init,
.timer = &msm_timer,
MACHINE_END
+
+#ifdef CONFIG_OF
+/* TODO: General device tree support for all MSM. */
+DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
+ .map_io = msm8x60_map_io,
+ .init_irq = msm8x60_init_irq,
+ .init_machine = msm8x60_dt_init,
+ .timer = &msm_timer,
+ .dt_compat = msm8x60_fluid_match,
+MACHINE_END
+#endif /* CONFIG_OF */
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index 5a31f70..41c252d 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -37,7 +37,7 @@
:
: "memory", "cc");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 7276595..fdec58a 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -117,7 +117,7 @@
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
- pen_release = cpu;
+ pen_release = cpu_logical_map(cpu);
__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index b4e7c58..af0c212 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,8 +1,9 @@
-if ARCH_MX503 || ARCH_MX51
+if ARCH_MX5
+
# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
# image. So for most time, SOC_IMX50/51/53 should be used.
-config ARCH_MX5
+config ARCH_MX51
bool
config ARCH_MX50
@@ -19,7 +20,6 @@
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
- select ARCH_MX5
select ARCH_MX50
config SOC_IMX51
@@ -30,7 +30,7 @@
select ARCH_MXC_IOMUX_V3
select ARCH_MXC_AUDMUX_V2
select ARCH_HAS_CPUFREQ
- select ARCH_MX5
+ select ARCH_MX51
config SOC_IMX53
bool
@@ -38,10 +38,8 @@
select ARM_L1_CACHE_SHIFT_6
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
- select ARCH_MX5
select ARCH_MX53
-if ARCH_MX50_SUPPORTED
#comment "i.MX50 machines:"
config MACH_MX50_RDP
@@ -52,22 +50,29 @@
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
- select IMX_HAVE_PLATFORM_FEC
help
Include support for MX50 reference design platform (RDP) board. This
includes specific configurations for the board and its peripherals.
-endif # ARCH_MX50_SUPPORTED
-
-if ARCH_MX51
comment "i.MX51 machines:"
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -91,8 +96,10 @@
config MACH_EUKREA_CPUIMX51
bool "Support Eukrea CPUIMX51 module"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SPI_IMX
help
@@ -119,10 +126,12 @@
config MACH_EUKREA_CPUIMX51SD
bool "Support Eukrea CPUIMX51SD module"
select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_SPI_IMX
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
help
Include support for Eukrea CPUIMX51SD platform. This includes
specific configurations for the module and its peripherals.
@@ -147,6 +156,8 @@
bool
select SOC_IMX51
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_PATA_IMX
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_SPI_IMX
select MXC_ULPI if USB_ULPI
@@ -167,11 +178,20 @@
Include support for Genesi Efika Smartbook. This includes specific
configurations for the board and its peripherals.
-endif # ARCH_MX51
-
-if ARCH_MX53_SUPPORTED
comment "i.MX53 machines:"
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
config MACH_MX53_EVK
bool "Support MX53 EVK platforms"
select SOC_IMX53
@@ -221,6 +241,4 @@
Include support for MX53 ARD platform. This includes specific
configurations for the board and its peripherals.
-endif # ARCH_MX53_SUPPORTED
-
endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 383e7cd..0fc6080 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,8 +3,7 @@
#
# Object file lists.
-obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
-obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
obj-$(CONFIG_PM) += pm-imx5.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o
@@ -22,3 +21,6 @@
obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index e01af94..1fc1103 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -22,21 +22,18 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <mach/eukrea-baseboards.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27)
#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28)
@@ -57,7 +54,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
- .irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -65,7 +62,7 @@
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
- .irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -73,7 +70,7 @@
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
- .irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -81,7 +78,7 @@
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -167,7 +164,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -190,7 +187,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -206,17 +203,17 @@
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -270,12 +267,12 @@
ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
- mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ imx51_add_fsl_usb2_udc(&usb_pdata);
}
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
eukrea_mbimx51_baseboard_init();
@@ -297,6 +294,7 @@
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index b41fc27..52a11c1 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -22,7 +22,6 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/i2c-gpio.h>
#include <linux/spi/spi.h>
#include <linux/can/platform/mcp251x.h>
@@ -32,14 +31,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "cpu_op-mx51.h"
#define USBH1_RST IMX_GPIO_NR(2, 28)
@@ -108,7 +105,7 @@
/* Touchscreen */
/* IRQ */
- _MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
PAD_CTL_PKE | PAD_CTL_SRE_FAST |
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
@@ -129,7 +126,7 @@
I2C_BOARD_INFO("tsc2007", 0x49),
.type = "tsc2007",
.platform_data = &tsc2007_info,
- .irq = gpio_to_irq(TSC2007_IRQGPIO),
+ .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
};
@@ -149,7 +146,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -172,7 +169,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -189,17 +186,17 @@
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -245,7 +242,7 @@
.mode = SPI_MODE_0,
.chip_select = 0,
.platform_data = &mcp251x_info,
- .irq = gpio_to_irq(CAN_IRQGPIO)
+ .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
},
};
@@ -303,17 +300,17 @@
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
- mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ imx51_add_fsl_usb2_udc(&usb_pdata);
}
gpio_request(USBH1_RST, "usb_rst");
gpio_direction_output(USBH1_RST, 0);
msleep(20);
gpio_set_value(USBH1_RST, 1);
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
eukrea_mbimxsd51_baseboard_init();
@@ -335,6 +332,7 @@
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mxc_timer,
.init_machine = eukrea_cpuimx51sd_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
index 7de25c6..fc3621d 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -219,6 +219,7 @@
.map_io = mx50_map_io,
.init_early = imx50_init_early,
.init_irq = mx50_init_irq,
+ .handle_irq = imx50_handle_irq,
.timer = &mx50_rdp_timer,
.init_machine = mx50_rdp_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index a50174e..0578390 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -25,7 +25,6 @@
#include <mach/3ds_debugboard.h>
#include "devices-imx51.h"
-#include "devices.h"
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
@@ -173,6 +172,7 @@
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mx51_3ds_timer,
.init_machine = mx51_3ds_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 468926a..5c83760 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -24,14 +24,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "cpu_op-mx51.h"
#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
@@ -176,7 +174,7 @@
.bitrate = 100000,
};
-static struct imxi2c_platform_data babbage_hsi2c_data = {
+static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
.bitrate = 400000,
};
@@ -249,7 +247,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -272,7 +270,7 @@
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -288,17 +286,17 @@
MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -351,22 +349,27 @@
.wp_type = ESDHC_WP_GPIO,
};
+void __init imx51_babbage_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+ ARRAY_SIZE(mx51babbage_pads));
+}
+
/*
* Board specific initialization.
*/
static void __init mx51_babbage_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
- iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
- MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
+ PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
imx51_soc_init();
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
- mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
- ARRAY_SIZE(mx51babbage_pads));
+ imx51_babbage_common_init();
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_imx_uart(1, NULL);
@@ -381,17 +384,17 @@
imx51_add_imx_i2c(0, &babbage_i2c_data);
imx51_add_imx_i2c(1, &babbage_i2c_data);
- mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+ imx51_add_hsi2c(&babbage_hsi2c_data);
if (otg_mode_host)
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
- mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+ imx51_add_fsl_usb2_udc(&usb_pdata);
}
gpio_usbh1_active();
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
/* setback USBH1_STP to be function */
mxc_iomux_v3_setup_pad(usbh1stp);
babbage_usbhub_reset();
@@ -420,6 +423,7 @@
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mx51_babbage_timer,
.init_machine = mx51_babbage_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index c36880d..a9e4866 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -32,14 +32,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16)
@@ -163,6 +161,11 @@
.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
};
+static struct esdhc_platform_data sd_pdata = {
+ .cd_type = ESDHC_CD_CONTROLLER,
+ .wp_type = ESDHC_WP_CONTROLLER,
+};
+
static struct gpio_keys_button mx51_efikamx_powerkey[] = {
{
.code = KEY_POWER,
@@ -239,9 +242,11 @@
/* on < 1.2 boards both SD controllers are used */
if (system_rev < 0x12) {
- imx51_add_sdhci_esdhc_imx(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, NULL);
+ imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
mx51_efikamx_leds[2].default_trigger = "mmc1";
- }
+ } else
+ imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
gpio_led_register_device(-1, &mx51_efikamx_leds_data);
imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
@@ -284,6 +289,7 @@
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.timer = &mx51_efikamx_timer,
.init_machine = mx51_efikamx_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index ba5436a..38c4a3e 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -35,14 +35,12 @@
#include <mach/hardware.h>
#include <mach/iomux-mx51.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20)
@@ -56,6 +54,7 @@
#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1)
#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
static iomux_v3_cfg_t mx51efikasb_pads[] = {
/* USB HOST2 */
@@ -97,6 +96,8 @@
/* BT */
MX51_PAD_EIM_A17__GPIO2_11,
+
+ MX51_PAD_SD1_CD,
};
static int initialize_usbh2_port(struct platform_device *pdev)
@@ -119,7 +120,7 @@
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data usbh2_config = {
+static struct mxc_usbh_platform_data usbh2_config __initdata = {
.init = initialize_usbh2_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -129,7 +130,7 @@
usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
if (usbh2_config.otg)
- mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+ imx51_add_mxc_ehci_hs(2, &usbh2_config);
}
static const struct gpio_led mx51_efikasb_leds[] __initconst = {
@@ -182,6 +183,18 @@
.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
};
+static struct esdhc_platform_data sd0_pdata = {
+#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27)
+ .cd_gpio = EFIKASB_SD1_CD,
+ .cd_type = ESDHC_CD_GPIO,
+ .wp_type = ESDHC_WP_CONTROLLER,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+ .cd_type = ESDHC_CD_CONTROLLER,
+ .wp_type = ESDHC_WP_CONTROLLER,
+};
+
static struct regulator *pwgt1, *pwgt2;
static void mx51_efikasb_power_off(void)
@@ -250,7 +263,8 @@
mx51_efikasb_board_id();
mx51_efikasb_usb();
- imx51_add_sdhci_esdhc_imx(1, NULL);
+ imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
+ imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
gpio_led_register_device(-1, &mx51_efikasb_leds_data);
imx_add_gpio_keys(&mx51_efikasb_keys_data);
@@ -270,6 +284,7 @@
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
.init_machine = efikasb_board_init,
.timer = &mx51_efikasb_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4..0d7f0ff 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -134,8 +134,8 @@
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(ARD_ETHERNET_INT_B),
- .end = gpio_to_irq(ARD_ETHERNET_INT_B),
+ .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+ .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
.flags = IORESOURCE_IRQ,
},
};
@@ -171,9 +171,6 @@
static void __init mx53_ard_io_init(void)
{
- mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
- ARRAY_SIZE(mx53_ard_pads));
-
gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
gpio_direction_input(ARD_ETHERNET_INT_B);
@@ -216,6 +213,13 @@
return 0;
}
+void __init imx53_ard_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
+ ARRAY_SIZE(mx53_ard_pads));
+ weim_cs_config();
+}
+
static struct platform_device *devices[] __initdata = {
&ard_smsc_lan9220_device,
};
@@ -225,8 +229,8 @@
imx53_soc_init();
imx53_add_imx_uart(0, NULL);
+ imx53_ard_common_init();
mx53_ard_io_init();
- weim_cs_config();
platform_add_devices(devices, ARRAY_SIZE(devices));
imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
@@ -234,6 +238,7 @@
imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
imx_add_gpio_keys(&ard_button_data);
+ imx53_add_ahci_imx();
}
static void __init mx53_ard_timer_init(void)
@@ -249,6 +254,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_ard_timer,
.init_machine = mx53_ard_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 1b417b0..6bea31a 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -131,12 +131,17 @@
.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
};
+void __init imx53_evk_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
+ ARRAY_SIZE(mx53_evk_pads));
+}
+
static void __init mx53_evk_board_init(void)
{
imx53_soc_init();
+ imx53_evk_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
- ARRAY_SIZE(mx53_evk_pads));
mx53_evk_init_uart();
mx53_evk_fec_reset();
imx53_add_fec(&mx53_evk_fec_pdata);
@@ -167,6 +172,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_evk_timer,
.init_machine = mx53_evk_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4e1d51d..7678f77 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/i2c.h>
#include <mach/common.h>
#include <mach/hardware.h>
@@ -42,6 +43,7 @@
#define LOCO_SD3_CD IMX_GPIO_NR(3, 11)
#define LOCO_SD3_WP IMX_GPIO_NR(3, 12)
#define LOCO_SD1_CD IMX_GPIO_NR(3, 13)
+#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14)
static iomux_v3_cfg_t mx53_loco_pads[] = {
/* FEC */
@@ -64,6 +66,10 @@
MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+ /* I2C1 */
+ MX53_PAD_CSI0_DAT8__I2C1_SDA,
+ MX53_PAD_CSI0_DAT9__I2C1_SCL,
+ MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */
/* I2C2 */
MX53_PAD_KEY_COL3__I2C2_SCL,
MX53_PAD_KEY_ROW3__I2C2_SDA,
@@ -257,22 +263,42 @@
.num_leds = ARRAY_SIZE(mx53loco_leds),
};
+void __init imx53_qsb_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
+ ARRAY_SIZE(mx53_loco_pads));
+}
+
+static struct i2c_board_info mx53loco_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("mma8450", 0x1C),
+ },
+};
+
static void __init mx53_loco_board_init(void)
{
+ int ret;
imx53_soc_init();
+ imx53_qsb_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
- ARRAY_SIZE(mx53_loco_pads));
imx53_add_imx_uart(0, NULL);
mx53_loco_fec_reset();
imx53_add_fec(&mx53_loco_fec_data);
imx53_add_imx2_wdt(0, NULL);
+
+ ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
+ if (ret)
+ pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
+
+ i2c_register_board_info(0, mx53loco_i2c_devices,
+ ARRAY_SIZE(mx53loco_i2c_devices));
imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
imx_add_gpio_keys(&loco_button_data);
gpio_led_register_device(-1, &mx53loco_leds_data);
+ imx53_add_ahci_imx();
}
static void __init mx53_loco_timer_init(void)
@@ -288,6 +314,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_loco_timer,
.init_machine = mx53_loco_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894..59c0845 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -35,6 +35,7 @@
#include "devices-imx53.h"
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3)
static iomux_v3_cfg_t mx53_smd_pads[] = {
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,12 +112,30 @@
.bitrate = 100000,
};
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+ int ret;
+
+ /* Enable SATA PWR */
+ ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+ GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+ if (ret) {
+ pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+ return;
+ }
+}
+
+void __init imx53_smd_common_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
+ ARRAY_SIZE(mx53_smd_pads));
+}
+
static void __init mx53_smd_board_init(void)
{
imx53_soc_init();
+ imx53_smd_common_init();
- mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
- ARRAY_SIZE(mx53_smd_pads));
mx53_smd_init_uart();
mx53_smd_fec_reset();
imx53_add_fec(&mx53_smd_fec_data);
@@ -125,6 +144,8 @@
imx53_add_sdhci_esdhc_imx(0, NULL);
imx53_add_sdhci_esdhc_imx(1, NULL);
imx53_add_sdhci_esdhc_imx(2, NULL);
+ mx53_smd_ahci_pwr_on();
+ imx53_add_ahci_imx();
}
static void __init mx53_smd_timer_init(void)
@@ -140,6 +161,7 @@
.map_io = mx53_map_io,
.init_early = imx53_init_early,
.init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
.timer = &mx53_smd_timer,
.init_machine = mx53_smd_board_init,
MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index f7bf996..2aacf41 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/clkdev.h>
+#include <linux/of.h>
#include <asm/div64.h>
@@ -1401,6 +1402,22 @@
.secondary = &esdhc4_ipg_clk,
};
+static struct clk sata_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_max_enable,
+ .enable_reg = MXC_CCM_CCGR4,
+ .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+ .disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+ .parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+ .parent = &ahb_clk,
+};
+
DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1418,6 +1435,10 @@
DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &pll3_sw_clk, NULL);
+/* PATA */
+DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
+ NULL, NULL, &ipg_clk, &spba_clk);
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -1474,6 +1495,7 @@
_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
};
static struct clk_lookup mx53_lookups[] = {
@@ -1507,6 +1529,10 @@
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+ _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
};
static void clk_tree_init(void)
@@ -1548,9 +1574,8 @@
clk_enable(&main_bus_clk);
clk_enable(&iim_clk);
- mx51_revision();
+ imx_print_silicon_rev("i.MX51", mx51_revision());
clk_disable(&iim_clk);
- mx51_display_revision();
/* move usb_phy_clk to 24MHz */
clk_set_parent(&usb_phy1_clk, &osc_clk);
@@ -1568,7 +1593,7 @@
/* System timer */
mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_MXC_INT_GPT);
+ MX51_INT_GPT);
return 0;
}
@@ -1592,9 +1617,8 @@
clk_enable(&main_bus_clk);
clk_enable(&iim_clk);
- mx53_revision();
+ imx_print_silicon_rev("i.MX53", mx53_revision());
clk_disable(&iim_clk);
- mx53_display_revision();
/* Set SDHC parents to be PLL2 */
clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
@@ -1609,3 +1633,41 @@
MX53_INT_GPT);
return 0;
}
+
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+ unsigned long *ckih1, unsigned long *ckih2)
+{
+ struct device_node *np;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ *ckil = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ *osc = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ *ckih1 = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+ *ckih2 = rate;
+ }
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index 86f87da..5c53282 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -18,7 +18,7 @@
#include <mach/hardware.h>
#include <asm/io.h>
-static int cpu_silicon_rev = -1;
+static int mx5_cpu_rev = -1;
#define IIM_SREV 0x24
#define MX50_HW_ADADIG_DIGPROG 0xB0
@@ -28,11 +28,14 @@
void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
u32 rev = readl(iim_base + IIM_SREV) & 0xff;
- if (rev == 0x0)
+ switch (rev) {
+ case 0x0:
return IMX_CHIP_REVISION_2_0;
- else if (rev == 0x10)
+ case 0x10:
return IMX_CHIP_REVISION_3_0;
- return 0;
+ default:
+ return IMX_CHIP_REVISION_UNKNOWN;
+ }
}
/*
@@ -45,33 +48,13 @@
if (!cpu_is_mx51())
return -EINVAL;
- if (cpu_silicon_rev == -1)
- cpu_silicon_rev = get_mx51_srev();
+ if (mx5_cpu_rev == -1)
+ mx5_cpu_rev = get_mx51_srev();
- return cpu_silicon_rev;
+ return mx5_cpu_rev;
}
EXPORT_SYMBOL(mx51_revision);
-void mx51_display_revision(void)
-{
- int rev;
- char *srev;
- rev = mx51_revision();
-
- switch (rev) {
- case IMX_CHIP_REVISION_2_0:
- srev = IMX_CHIP_REVISION_2_0_STRING;
- break;
- case IMX_CHIP_REVISION_3_0:
- srev = IMX_CHIP_REVISION_3_0_STRING;
- break;
- default:
- srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
- }
- printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx51_display_revision);
-
#ifdef CONFIG_NEON
/*
@@ -121,10 +104,10 @@
if (!cpu_is_mx53())
return -EINVAL;
- if (cpu_silicon_rev == -1)
- cpu_silicon_rev = get_mx53_srev();
+ if (mx5_cpu_rev == -1)
+ mx5_cpu_rev = get_mx53_srev();
- return cpu_silicon_rev;
+ return mx5_cpu_rev;
}
EXPORT_SYMBOL(mx53_revision);
@@ -134,7 +117,7 @@
u32 rev;
if (!anatop) {
- cpu_silicon_rev = -EINVAL;
+ mx5_cpu_rev = -EINVAL;
return 0;
}
@@ -159,36 +142,13 @@
if (!cpu_is_mx50())
return -EINVAL;
- if (cpu_silicon_rev == -1)
- cpu_silicon_rev = get_mx50_srev();
+ if (mx5_cpu_rev == -1)
+ mx5_cpu_rev = get_mx50_srev();
- return cpu_silicon_rev;
+ return mx5_cpu_rev;
}
EXPORT_SYMBOL(mx50_revision);
-void mx53_display_revision(void)
-{
- int rev;
- char *srev;
- rev = mx53_revision();
-
- switch (rev) {
- case IMX_CHIP_REVISION_1_0:
- srev = IMX_CHIP_REVISION_1_0_STRING;
- break;
- case IMX_CHIP_REVISION_2_0:
- srev = IMX_CHIP_REVISION_2_0_STRING;
- break;
- case IMX_CHIP_REVISION_2_1:
- srev = IMX_CHIP_REVISION_2_1_STRING;
- break;
- default:
- srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
- }
- printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx53_display_revision);
-
static int __init post_cpu_init(void)
{
unsigned int reg;
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index e11bc0e..af488bc 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -13,9 +13,15 @@
#define imx51_add_fec(pdata) \
imx_add_fec(&imx51_fec_data, pdata)
+extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
+#define imx51_add_fsl_usb2_udc(pdata) \
+ imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
+
extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
#define imx51_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+#define imx51_add_hsi2c(pdata) \
+ imx51_add_imx_i2c(2, pdata)
extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
#define imx51_add_imx_ssi(id, pdata) \
@@ -25,6 +31,13 @@
#define imx51_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
+#define imx51_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
+#define imx51_add_mxc_ehci_hs(id, pdata) \
+ imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
+
extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
#define imx51_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
@@ -52,3 +65,7 @@
extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
#define imx51_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx51_pata_imx_data;
+#define imx51_add_pata_imx() \
+ imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index c27fe8b..6e1e5d1 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -40,3 +40,9 @@
extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
#define imx53_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx53_pata_imx_data;
+#define imx53_add_pata_imx() \
+ imx_add_pata_imx(&imx53_pata_imx_data)
+
+extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
deleted file mode 100644
index 371ca8c..0000000
--- a/arch/arm/mach-mx5/devices.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
-
-static struct resource mxc_hsi2c_resources[] = {
- {
- .start = MX51_HSI2C_DMA_BASE_ADDR,
- .end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_HS_I2C,
- .end = MX51_MXC_INT_HS_I2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_hsi2c_device = {
- .name = "imx-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
- .resource = mxc_hsi2c_resources
-};
-
-static u64 usb_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource usbotg_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR,
- .end = MX51_OTG_BASE_ADDR + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_USB_OTG,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* OTG gadget device */
-struct platform_device mxc_usbdr_udc_device = {
- .name = "fsl-usb2-udc",
- .id = -1,
- .num_resources = ARRAY_SIZE(usbotg_resources),
- .resource = usbotg_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-struct platform_device mxc_usbdr_host_device = {
- .name = "mxc-ehci",
- .id = 0,
- .num_resources = ARRAY_SIZE(usbotg_resources),
- .resource = usbotg_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource usbh1_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR + 0x200,
- .end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_USB_H1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh1_device = {
- .name = "mxc-ehci",
- .id = 1,
- .num_resources = ARRAY_SIZE(usbh1_resources),
- .resource = usbh1_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource usbh2_resources[] = {
- {
- .start = MX51_OTG_BASE_ADDR + 0x400,
- .end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MX51_MXC_INT_USB_H2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_usbh2_device = {
- .name = "mxc-ehci",
- .id = 2,
- .num_resources = ARRAY_SIZE(usbh2_resources),
- .resource = usbh2_resources,
- .dev = {
- .dma_mask = &usb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
deleted file mode 100644
index 55a5129..0000000
--- a/arch/arm/mach-mx5/devices.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct platform_device mxc_usbdr_host_device;
-extern struct platform_device mxc_usbh1_device;
-extern struct platform_device mxc_usbh2_device;
-extern struct platform_device mxc_usbdr_udc_device;
-extern struct platform_device mxc_hsi2c_device;
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c
index 7ce12c8..c17fa13 100644
--- a/arch/arm/mach-mx5/ehci.c
+++ b/arch/arm/mach-mx5/ehci.c
@@ -52,7 +52,7 @@
void __iomem *usbother_base;
int ret = 0;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base) {
printk(KERN_ERR "%s(): ioremap failed\n", __func__);
return -ENOMEM;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index bbf4564..a6a3ab8 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -28,7 +28,6 @@
#include <asm/mach/arch.h>
#include "devices-imx51.h"
-#include "devices.h"
#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30)
#define MBIMX51_LED0 IMX_GPIO_NR(3, 5)
@@ -160,7 +159,7 @@
static struct i2c_board_info mbimx51_i2c_devices[] = {
{
I2C_BOARD_INFO("tsc2007", 0x49),
- .irq = gpio_to_irq(MBIMX51_TSC2007_GPIO),
+ .irq = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
.platform_data = &tsc2007_data,
}, {
I2C_BOARD_INFO("tlv320aic23", 0x1a),
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index 2619239..d817fc8 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -24,7 +24,6 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/input.h>
@@ -41,13 +40,12 @@
#include <mach/audmux.h>
#include "devices-imx51.h"
-#include "devices.h"
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LED */
MX51_PAD_NANDF_D10__GPIO3_30,
/* SWITCH */
- _MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
PAD_CTL_PKE | PAD_CTL_SRE_FAST |
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
/* UART2 */
@@ -66,7 +64,7 @@
MX51_PAD_SD1_DATA2__SD1_DATA2,
MX51_PAD_SD1_DATA3__SD1_DATA3,
/* SD1 CD */
- _MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+ NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
PAD_CTL_PKE | PAD_CTL_SRE_FAST |
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
};
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
new file mode 100644
index 0000000..ccc6158
--- /dev/null
+++ b/arch/arm/mach-mx5/imx51-dt.c
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx51.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 4; /* imx51 gets 4 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx51_irq_match[] __initconst = {
+ { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx51_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx51_irq_match);
+
+ node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx51_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx51_auxdata_lookup, NULL);
+}
+
+static void __init imx51_timer_init(void)
+{
+ mx51_clocks_init_dt();
+}
+
+static struct sys_timer imx51_timer = {
+ .init = imx51_timer_init,
+};
+
+static const char *imx51_dt_board_compat[] __initdata = {
+ "fsl,imx51-babbage",
+ NULL
+};
+
+DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
+ .map_io = mx51_map_io,
+ .init_early = imx51_init_early,
+ .init_irq = mx51_init_irq,
+ .handle_irq = imx51_handle_irq,
+ .timer = &imx51_timer,
+ .init_machine = imx51_dt_init,
+ .dt_compat = imx51_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
new file mode 100644
index 0000000..ccaa0b8
--- /dev/null
+++ b/arch/arm/mach-mx5/imx53-dt.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/common.h>
+#include <mach/mx53.h>
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate(). Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
+ OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
+ { /* sentinel */ }
+};
+
+static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ irq_domain_add_simple(np, 0);
+}
+
+static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+ struct device_node *interrupt_parent)
+{
+ static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
+ 32 * 7; /* imx53 gets 7 gpio ports */
+
+ irq_domain_add_simple(np, gpio_irq_base);
+ gpio_irq_base += 32;
+}
+
+static const struct of_device_id imx53_irq_match[] __initconst = {
+ { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
+ { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
+ { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
+ { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
+ { /* sentinel */ }
+};
+
+static void __init imx53_dt_init(void)
+{
+ struct device_node *node;
+ const struct of_device_id *of_id;
+ void (*func)(void);
+
+ of_irq_init(imx53_irq_match);
+
+ node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
+ if (node) {
+ of_id = of_match_node(imx53_iomuxc_of_match, node);
+ func = of_id->data;
+ func();
+ of_node_put(node);
+ }
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
+}
+
+static void __init imx53_timer_init(void)
+{
+ mx53_clocks_init_dt();
+}
+
+static struct sys_timer imx53_timer = {
+ .init = imx53_timer_init,
+};
+
+static const char *imx53_dt_board_compat[] __initdata = {
+ "fsl,imx53-ard",
+ "fsl,imx53-evk",
+ "fsl,imx53-qsb",
+ "fsl,imx53-smd",
+ NULL
+};
+
+DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
+ .map_io = mx53_map_io,
+ .init_early = imx53_init_early,
+ .init_irq = mx53_init_irq,
+ .handle_irq = imx53_handle_irq,
+ .timer = &imx53_timer,
+ .init_machine = imx53_dt_init,
+ .dt_compat = imx53_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
deleted file mode 100644
index 77e374c..0000000
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
- imx_map_entry(MX50, TZIC, MT_DEVICE),
- imx_map_entry(MX50, SPBA0, MT_DEVICE),
- imx_map_entry(MX50, AIPS1, MT_DEVICE),
- imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
- iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX50);
- mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
- tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init imx50_soc_init(void)
-{
- /* i.mx50 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
- mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
- mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index baea6e5..26eacc9 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -21,12 +21,27 @@
#include <mach/devices-common.h>
#include <mach/iomux-v3.h>
+static void imx5_idle(void)
+{
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+}
+
+/*
+ * Define the MX50 memory map.
+ */
+static struct map_desc mx50_io_desc[] __initdata = {
+ imx_map_entry(MX50, TZIC, MT_DEVICE),
+ imx_map_entry(MX50, SPBA0, MT_DEVICE),
+ imx_map_entry(MX50, AIPS1, MT_DEVICE),
+ imx_map_entry(MX50, AIPS2, MT_DEVICE),
+};
+
/*
* Define the MX51 memory map.
*/
static struct map_desc mx51_io_desc[] __initdata = {
+ imx_map_entry(MX51, TZIC, MT_DEVICE),
imx_map_entry(MX51, IRAM, MT_DEVICE),
- imx_map_entry(MX51, DEBUG, MT_DEVICE),
imx_map_entry(MX51, AIPS1, MT_DEVICE),
imx_map_entry(MX51, SPBA0, MT_DEVICE),
imx_map_entry(MX51, AIPS2, MT_DEVICE),
@@ -36,6 +51,7 @@
* Define the MX53 memory map.
*/
static struct map_desc mx53_io_desc[] __initdata = {
+ imx_map_entry(MX53, TZIC, MT_DEVICE),
imx_map_entry(MX53, AIPS1, MT_DEVICE),
imx_map_entry(MX53, SPBA0, MT_DEVICE),
imx_map_entry(MX53, AIPS2, MT_DEVICE),
@@ -46,21 +62,34 @@
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
+void __init mx50_map_io(void)
+{
+ iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
+}
+
void __init mx51_map_io(void)
{
iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
}
+void __init mx53_map_io(void)
+{
+ iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+}
+
+void __init imx50_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX50);
+ mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+}
+
void __init imx51_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-}
-
-void __init mx53_map_io(void)
-{
- iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+ imx_idle = imx5_idle;
}
void __init imx53_init_early(void)
@@ -70,35 +99,19 @@
mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
}
+void __init mx50_init_irq(void)
+{
+ tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
+}
+
void __init mx51_init_irq(void)
{
- unsigned long tzic_addr;
- void __iomem *tzic_virt;
-
- if (mx51_revision() < IMX_CHIP_REVISION_2_0)
- tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
- else
- tzic_addr = MX51_TZIC_BASE_ADDR;
-
- tzic_virt = ioremap(tzic_addr, SZ_16K);
- if (!tzic_virt)
- panic("unable to map TZIC interrupt controller\n");
-
- tzic_init_irq(tzic_virt);
+ tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
}
void __init mx53_init_irq(void)
{
- unsigned long tzic_addr;
- void __iomem *tzic_virt;
-
- tzic_addr = MX53_TZIC_BASE_ADDR;
-
- tzic_virt = ioremap(tzic_addr, SZ_16K);
- if (!tzic_virt)
- panic("unable to map TZIC interrupt controller\n");
-
- tzic_init_irq(tzic_virt);
+ tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
}
static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
@@ -138,13 +151,24 @@
.script_addrs = &imx53_sdma_script,
};
+void __init imx50_soc_init(void)
+{
+ /* i.mx50 has the i.mx31 type gpio */
+ mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+ mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+}
+
void __init imx51_soc_init(void)
{
/* i.mx51 has the i.mx31 type gpio */
- mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
- mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
- mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
- mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+ mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
+ mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
+ mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
+ mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index c920945..ec6ca91 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -34,14 +34,12 @@
#include <linux/usb/ulpi.h>
#include <mach/ulpi.h>
-#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices-imx51.h"
-#include "devices.h"
#include "efika.h"
#include "cpu_op-mx51.h"
@@ -133,7 +131,7 @@
u32 v;
void __iomem *usb_base;
void __iomem *usbother_base;
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
if (!usb_base)
return -ENOMEM;
usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +148,7 @@
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
};
@@ -170,7 +168,7 @@
gpio_set_value(EFIKAMX_USBH1_STP, 1);
msleep(1);
- usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+ usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
/* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +187,7 @@
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
};
@@ -217,9 +215,9 @@
usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
- mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+ imx51_add_mxc_ehci_otg(&dr_utmi_config);
if (usbh1_config.otg)
- mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+ imx51_add_mxc_ehci_hs(1, &usbh1_config);
}
static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -567,7 +565,7 @@
};
static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
- .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR,
+ .flags = MC13XXX_USE_RTC,
.regulators = {
.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
.regulators = mx51_efika_regulators,
@@ -589,7 +587,7 @@
.bus_num = 0,
.chip_select = 0,
.platform_data = &mx51_efika_mc13892_data,
- .irq = gpio_to_irq(EFIKAMX_PMIC),
+ .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
},
};
@@ -609,7 +607,6 @@
ARRAY_SIZE(mx51efika_pads));
imx51_add_imx_uart(0, &uart_pdata);
mx51_efika_usb();
- imx51_add_sdhci_esdhc_imx(0, NULL);
/* FIXME: comes from original code. check this. */
if (mx51_revision() < IMX_CHIP_REVISION_2_0)
@@ -627,8 +624,9 @@
ARRAY_SIZE(mx51_efika_spi_board_info));
imx51_add_ecspi(0, &mx51_efika_spi_pdata);
+ imx51_add_pata_imx();
+
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
}
-
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
index e4529af..98052fc 100644
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ b/arch/arm/mach-mx5/pm-imx5.c
@@ -14,14 +14,19 @@
#include <linux/err.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-#include <mach/system.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
#include "crm_regs.h"
static struct clk *gpc_dvfs_clk;
+static int mx5_suspend_prepare(void)
+{
+ return clk_enable(gpc_dvfs_clk);
+}
+
static int mx5_suspend_enter(suspend_state_t state)
{
- clk_enable(gpc_dvfs_clk);
switch (state) {
case PM_SUSPEND_MEM:
mx5_cpu_lp_set(STOP_POWER_OFF);
@@ -42,11 +47,14 @@
__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
}
cpu_do_idle();
- clk_disable(gpc_dvfs_clk);
-
return 0;
}
+static void mx5_suspend_finish(void)
+{
+ clk_disable(gpc_dvfs_clk);
+}
+
static int mx5_pm_valid(suspend_state_t state)
{
return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
@@ -54,7 +62,9 @@
static const struct platform_suspend_ops mx5_suspend_ops = {
.valid = mx5_pm_valid,
+ .prepare = mx5_suspend_prepare,
.enter = mx5_suspend_enter,
+ .finish = mx5_suspend_finish,
};
static int __init mx5_pm_init(void)
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
index 76ae8dc..144ebeb 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-mx5/system.c
@@ -13,6 +13,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include "crm_regs.h"
/* set cpu low power mode before WFI instruction. This function is called
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4cd0231..cf00b3e 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -23,6 +23,7 @@
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
help
Include support for STMP378x-devb platform. This includes specific
configurations for the board and its peripherals.
@@ -34,6 +35,7 @@
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
help
Include support for MX23EVK platform. This includes specific
configurations for the board and its peripherals.
@@ -48,6 +50,9 @@
select MXS_HAVE_PLATFORM_FLEXCAN
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_HAVE_PLATFORM_MXS_SAIF
+ select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
select MXS_OCOTP
help
Include support for MX28EVK platform. This includes specific
@@ -63,9 +68,27 @@
select MXS_HAVE_PLATFORM_MXS_I2C
select MXS_HAVE_PLATFORM_MXS_MMC
select MXS_HAVE_PLATFORM_MXS_PWM
+ select MXS_HAVE_PLATFORM_RTC_STMP3XXX
+
+config MODULE_M28
+ bool
+ select SOC_IMX28
+ select LEDS_GPIO_REGISTER
+ select MXS_HAVE_AMBA_DUART
+ select MXS_HAVE_PLATFORM_AUART
+ select MXS_HAVE_PLATFORM_FEC
+ select MXS_HAVE_PLATFORM_FLEXCAN
+ select MXS_HAVE_PLATFORM_MXS_I2C
+ select MXS_HAVE_PLATFORM_MXS_MMC
+ select MXS_HAVE_PLATFORM_MXSFB
+ select MXS_OCOTP
config MACH_TX28
bool "Ka-Ro TX28 module"
select MODULE_TX28
+config MACH_M28EVK
+ bool "Support DENX M28EVK Platform"
+ select MODULE_M28
+
endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 6c38262..8c93b24 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,15 +1,16 @@
# Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
+obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o
obj-$(CONFIG_MODULE_TX28) += module-tx28.o
obj-$(CONFIG_MACH_TX28) += mach-tx28.o
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5dcc59d..229ae34 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -349,7 +349,7 @@
\
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC; \
- reg |= frac; \
+ reg |= frac << BP_CLKCTRL_##fr##_##fs##FRAC; \
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr); \
} \
\
@@ -640,6 +640,8 @@
_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
+ _REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
+ _REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
};
static int clk_misc_init(void)
@@ -708,11 +710,11 @@
/* SAIF has to use frac div for functional operation */
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
- reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
+ reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
- reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
+ reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
/*
@@ -738,11 +740,17 @@
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
- /* Extra fec clock setting */
- reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
- reg &= ~BM_CLKCTRL_ENET_SLEEP;
- reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
- __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ /*
+ * Extra fec clock setting
+ * The DENX M28 uses an external clock source
+ * and the clock output must not be enabled
+ */
+ if (!machine_is_m28evk()) {
+ reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ reg &= ~BM_CLKCTRL_ENET_SLEEP;
+ reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+ __raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+ }
/*
* 480 MHz seems too high to be ssp clock source directly,
@@ -774,6 +782,8 @@
clk_enable(&uart_clk);
clk_set_parent(&lcdif_clk, &ref_pix_clk);
+ clk_set_parent(&saif0_clk, &pll0_clk);
+ clk_set_parent(&saif1_clk, &pll0_clk);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
index c6f345f..3fa651d 100644
--- a/arch/arm/mach-mxs/devices-mx23.h
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -29,3 +29,5 @@
struct platform_device *__init mx23_add_mxsfb(
const struct mxsfb_platform_data *pdata);
+
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index 79b9452..c888710 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -45,3 +45,8 @@
struct platform_device *__init mx28_add_mxsfb(
const struct mxsfb_platform_data *pdata);
+
+extern const struct mxs_saif_data mx28_saif_data[] __initconst;
+#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id])
+
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
index acf9eea..18b6bf5 100644
--- a/arch/arm/mach-mxs/devices/Kconfig
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -23,3 +23,9 @@
config MXS_HAVE_PLATFORM_MXSFB
bool
+
+config MXS_HAVE_PLATFORM_MXS_SAIF
+ bool
+
+config MXS_HAVE_PLATFORM_RTC_STMP3XXX
+ bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
index 351915c..f52e3e5 100644
--- a/arch/arm/mach-mxs/devices/Makefile
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -8,3 +8,5 @@
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
obj-y += platform-gpio-mxs.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
new file mode 100644
index 0000000..1ec965e
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_saif_data_entry_single(soc, _id) \
+ { \
+ .id = _id, \
+ .iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \
+ .irq = soc ## _INT_SAIF ## _id, \
+ .dma = soc ## _DMA_SAIF ## _id, \
+ .dmairq = soc ## _INT_SAIF ## _id ##_DMA, \
+ }
+
+#define mxs_saif_data_entry(soc, _id) \
+ [_id] = mxs_saif_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_saif_data mx28_saif_data[] __initconst = {
+ mxs_saif_data_entry(MX28, 0),
+ mxs_saif_data_entry(MX28, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->dma,
+ .end = data->dma,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = data->dmairq,
+ .end = data->dmairq,
+ .flags = IORESOURCE_IRQ,
+ },
+
+ };
+
+ return mxs_add_platform_device("mxs-saif", data->id, res,
+ ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
new file mode 100644
index 0000000..639eaee
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#ifdef CONFIG_SOC_IMX23
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
+{
+ struct resource res[] = {
+ {
+ .start = MX23_RTC_BASE_ADDR,
+ .end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX23_INT_RTC_ALARM,
+ .end = MX23_INT_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+ NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX23 */
+
+#ifdef CONFIG_SOC_IMX28
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
+{
+ struct resource res[] = {
+ {
+ .start = MX28_RTC_BASE_ADDR,
+ .end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX28_INT_RTC_ALARM,
+ .end = MX28_INT_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+ NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX28 */
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 714570d..90c6b78 100644
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -14,17 +14,9 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
-#ifdef CONFIG_SOC_IMX23
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#ifdef CONFIG_DEBUG_IMX23_UART
#define UART_PADDR MX23_DUART_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX28_UART)
#define UART_PADDR MX28_DUART_BASE_ADDR
#endif
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index 812d7a8..a8080f4 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -92,3 +92,15 @@
/* pwm */
struct platform_device *__init mxs_add_mxs_pwm(
resource_size_t iobase, int id);
+
+/* saif */
+struct mxs_saif_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t irq;
+ resource_size_t dma;
+ resource_size_t dmairq;
+};
+
+struct platform_device *__init mxs_add_saif(
+ const struct mxs_saif_data *data);
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
index bb11e63..40a8c17 100644
--- a/arch/arm/mach-mxs/include/mach/gpio.h
+++ b/arch/arm/mach-mxs/include/mach/gpio.h
@@ -1,27 +1 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_GPIO_H__
-#define __MACH_MXS_GPIO_H__
-
-#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
-
-#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
-
-#endif /* __MACH_MXS_GPIO_H__ */
+/* empty */
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 35a89dd..0d2d2b4 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -33,6 +33,7 @@
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
+ machine_is_m28evk() || \
machine_is_tx28() || \
0)
@@ -86,6 +87,8 @@
.type = _type, \
}
+#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
+
#define MXS_SET_ADDR 0x4
#define MXS_CLR_ADDR 0x8
#define MXS_TOG_ADDR 0xc
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 7f8bf65..6777674 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -63,6 +63,7 @@
mxs_duart_base = MX23_DUART_BASE_ADDR;
break;
case MACH_TYPE_MX28EVK:
+ case MACH_TYPE_M28EVK:
case MACH_TYPE_TX28:
mxs_duart_base = MX28_DUART_BASE_ADDR;
break;
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
new file mode 100644
index 0000000..3b1681e
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16)
+#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17)
+
+#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
+#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28)
+
+#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28)
+
+static const iomux_cfg_t m28evk_pads[] __initconst = {
+ /* duart */
+ MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
+
+ /* auart0 */
+ MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+
+ /* auart3 */
+ MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+ MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+ /* fec0 */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+ /* fec1 */
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
+
+ /* flexcan0 */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* flexcan1 */
+ MX28_PAD_GPMI_CE2N__CAN1_TX,
+ MX28_PAD_GPMI_CE3N__CAN1_RX,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* mxsfb (lcdif) */
+ MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+ MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
+
+ /* mmc0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA1__SSP0_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA2__SSP0_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA3__SSP0_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA4__SSP0_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA5__SSP0_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA6__SSP0_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DATA7__SSP0_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_CMD__SSP0_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* mmc1 */
+ MX28_PAD_GPMI_D00__SSP1_D0 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D01__SSP1_D1 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D02__SSP1_D2 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D03__SSP1_D3 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D04__SSP1_D4 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D05__SSP1_D5 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D06__SSP1_D6 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_D07__SSP1_D7 |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY1__SSP1_CMD |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_WRN__SSP1_SCK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* write protect */
+ MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+ /* slot power enable */
+ MX28_PAD_PWM4__GPIO_3_29 |
+ (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+ /* led */
+ MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
+ MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
+
+ /* nand */
+ MX28_PAD_GPMI_D00__GPMI_D0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D01__GPMI_D1 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D02__GPMI_D2 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D03__GPMI_D3 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D04__GPMI_D4 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D05__GPMI_D5 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D06__GPMI_D6 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_D07__GPMI_D7 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_ALE__GPMI_ALE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_CLE__GPMI_CLE |
+ (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN |
+ (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+
+ /* Backlight */
+ MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led m28evk_leds[] __initconst = {
+ {
+ .name = "user-led1",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED1,
+ },
+ {
+ .name = "user-led2",
+ .default_trigger = "heartbeat",
+ .gpio = M28EVK_GPIO_USERLED2,
+ },
+};
+
+static const struct gpio_led_platform_data m28evk_led_data __initconst = {
+ .leds = m28evk_leds,
+ .num_leds = ARRAY_SIZE(m28evk_leds),
+};
+
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
+ {
+ /* fec0 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ }, {
+ /* fec1 */
+ .phy = PHY_INTERFACE_MODE_RMII,
+ },
+};
+
+static int __init m28evk_fec_get_mac(void)
+{
+ int i;
+ u32 val;
+ const u32 *ocotp = mxs_get_ocotp();
+
+ if (!ocotp) {
+ pr_err("%s: timeout when reading fec mac from OCOTP\n",
+ __func__);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * OCOTP only stores the last 4 octets for each mac address,
+ * so hard-code DENX OUI (C0:E5:4E) here.
+ */
+ for (i = 0; i < 2; i++) {
+ val = ocotp[i * 4];
+ mx28_fec_pdata[i].mac[0] = 0xC0;
+ mx28_fec_pdata[i].mac[1] = 0xE5;
+ mx28_fec_pdata[i].mac[2] = 0x4E;
+ mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+ mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+ mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+ }
+
+ return 0;
+}
+
+/* mxsfb (lcdif) */
+static struct fb_videomode m28evk_video_modes[] = {
+ {
+ .name = "Ampire AM-800480R2TMQW-T01H",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30066, /* picosecond (33.26 MHz) */
+ .left_margin = 0,
+ .right_margin = 256,
+ .upper_margin = 0,
+ .lower_margin = 45,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT,
+ },
+};
+
+static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
+ .mode_list = m28evk_video_modes,
+ .mode_count = ARRAY_SIZE(m28evk_video_modes),
+ .default_bpp = 16,
+ .ld_intf_width = STMLCDIF_18BIT,
+};
+
+static struct at24_platform_data m28evk_eeprom = {
+ .byte_len = 16384,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
+ {
+ I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */
+ .platform_data = &m28evk_eeprom,
+ },
+};
+
+static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
+ {
+ /* mmc0 */
+ .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ }, {
+ /* mmc1 */
+ .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+ .flags = SLOTF_8_BIT_CAPABLE,
+ },
+};
+
+static void __init m28evk_init(void)
+{
+ mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
+
+ mx28_add_duart();
+ mx28_add_auart0();
+ mx28_add_auart3();
+
+ if (!m28evk_fec_get_mac()) {
+ mx28_add_fec(0, &mx28_fec_pdata[0]);
+ mx28_add_fec(1, &mx28_fec_pdata[1]);
+ }
+
+ mx28_add_flexcan(0, NULL);
+ mx28_add_flexcan(1, NULL);
+
+ mx28_add_mxsfb(&m28evk_mxsfb_pdata);
+
+ mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
+ mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
+
+ gpio_led_register_device(0, &m28evk_led_data);
+
+ /* I2C */
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
+ ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
+}
+
+static void __init m28evk_timer_init(void)
+{
+ mx28_clocks_init();
+}
+
+static struct sys_timer m28evk_timer = {
+ .init = m28evk_timer_init,
+};
+
+MACHINE_START(M28EVK, "DENX M28 EVK")
+ .map_io = mx28_map_io,
+ .init_irq = mx28_init_irq,
+ .init_machine = m28evk_init,
+ .timer = &m28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 3c2de33..c325fbe 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -15,7 +15,6 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -167,6 +166,7 @@
gpio_set_value(MX23EVK_BL_ENABLE, 1);
mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
+ mx23_add_rtc_stmp3xxx();
}
static void __init mx23evk_timer_init(void)
@@ -182,6 +182,6 @@
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx23_map_io,
.init_irq = mx23_init_irq,
- .init_machine = mx23evk_init,
.timer = &mx23evk_timer,
+ .init_machine = mx23evk_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index eaaf6ff..ac2316d 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -16,8 +16,10 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/irq.h>
#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -183,6 +185,24 @@
/* led */
MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_I2C0_SDA__I2C0_SDA |
+ (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+
+ /* saif0 & saif1 */
+ MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+ MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
+ (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
};
/* led */
@@ -352,6 +372,55 @@
},
};
+static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("sgtl5000", 0x0a),
+ },
+};
+
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
+ REGULATOR_SUPPLY("VDDA", "0-000a"),
+ REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data mx28evk_vdd_reg_init_data = {
+ .constraints = {
+ .name = "3V3",
+ .always_on = 1,
+ },
+ .consumer_supplies = mx28evk_audio_consumer_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config mx28evk_vdd_pdata = {
+ .supply_name = "board-3V3",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 1,
+ .init_data = &mx28evk_vdd_reg_init_data,
+};
+static struct platform_device mx28evk_voltage_regulator = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mx28evk_vdd_pdata,
+ },
+};
+static void __init mx28evk_add_regulators(void)
+{
+ platform_device_register(&mx28evk_voltage_regulator);
+}
+#else
+static void __init mx28evk_add_regulators(void) {}
+#endif
+
+static struct gpio mx28evk_lcd_gpios[] = {
+ { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
+ { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+};
+
static void __init mx28evk_init(void)
{
int ret;
@@ -378,19 +447,24 @@
mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
}
- ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
+ ret = gpio_request_array(mx28evk_lcd_gpios,
+ ARRAY_SIZE(mx28evk_lcd_gpios));
if (ret)
- pr_warn("failed to request gpio lcd-enable: %d\n", ret);
+ pr_warn("failed to request gpio pins for lcd: %d\n", ret);
else
- gpio_set_value(MX28EVK_LCD_ENABLE, 1);
+ mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
- ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
- if (ret)
- pr_warn("failed to request gpio bl-enable: %d\n", ret);
- else
- gpio_set_value(MX28EVK_BL_ENABLE, 1);
+ mx28_add_saif(0);
+ mx28_add_saif(1);
- mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+ mx28_add_mxs_i2c(0);
+ i2c_register_board_info(0, mxs_i2c0_board_info,
+ ARRAY_SIZE(mxs_i2c0_board_info));
+
+ mx28evk_add_regulators();
+
+ mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
+ NULL, 0);
/* power on mmc slot by writing 0 to the gpio */
ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
@@ -403,7 +477,11 @@
"mmc1-slot-power");
if (ret)
pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+ else
+ mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+ mx28_add_rtc_stmp3xxx();
gpio_led_register_device(0, &mx28evk_led_data);
}
@@ -421,6 +499,6 @@
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = mx28evk_init,
.timer = &mx28evk_timer,
+ .init_machine = mx28evk_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index 7f38d82..177e531 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -19,7 +19,6 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/irq.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
@@ -91,6 +90,7 @@
mx23_add_duart();
mx23_add_auart0();
+ mx23_add_rtc_stmp3xxx();
/* power on mmc slot */
ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 515a423..9a1f0e7 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -161,6 +161,7 @@
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
+ mx28_add_rtc_stmp3xxx();
}
static void __init tx28_timer_init(void)
@@ -175,6 +176,6 @@
MACHINE_START(TX28, "Ka-Ro electronics TX28 module")
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
- .init_machine = tx28_stk5v3_init,
.timer = &tx28_timer,
+ .init_machine = tx28_stk5v3_init,
MACHINE_END
diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c
deleted file mode 100644
index b6e18dd..0000000
--- a/arch/arm/mach-mxs/mm-mx28.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
- mxs_map_entry(MX28, OCRAM, MT_DEVICE),
- mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx28_map_io(void)
-{
- iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}
-
-void __init mx28_init_irq(void)
-{
- icoll_init_irq();
-}
diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm.c
similarity index 75%
rename from arch/arm/mach-mxs/mm-mx23.c
rename to arch/arm/mach-mxs/mm.c
index 1b2345a..50af5ce 100644
--- a/arch/arm/mach-mxs/mm-mx23.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -17,6 +17,7 @@
#include <asm/mach/map.h>
#include <mach/mx23.h>
+#include <mach/mx28.h>
#include <mach/common.h>
#include <mach/iomux.h>
@@ -29,6 +30,14 @@
};
/*
+ * Define the MX28 memory map.
+ */
+static struct map_desc mx28_io_desc[] __initdata = {
+ mxs_map_entry(MX28, OCRAM, MT_DEVICE),
+ mxs_map_entry(MX28, IO, MT_DEVICE),
+};
+
+/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
@@ -42,3 +51,13 @@
{
icoll_init_irq();
}
+
+void __init mx28_map_io(void)
+{
+ iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
+}
+
+void __init mx28_init_irq(void)
+{
+ icoll_init_irq();
+}
diff --git a/arch/arm/mach-nuc93x/Kconfig b/arch/arm/mach-nuc93x/Kconfig
deleted file mode 100644
index 2bc40a2..0000000
--- a/arch/arm/mach-nuc93x/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if ARCH_NUC93X
-
-config CPU_NUC932
- bool
- help
- Support for NUC932 of Nuvoton NUC93X CPUs.
-
-menu "NUC932 Machines"
-
-config MACH_NUC932EVB
- bool "Nuvoton NUC932 Evaluation Board"
- default y
- select CPU_NUC932
- help
- Say Y here if you are using the Nuvoton NUC932EVB
-
-endmenu
-
-endif
diff --git a/arch/arm/mach-nuc93x/Makefile b/arch/arm/mach-nuc93x/Makefile
deleted file mode 100644
index 440e2de..0000000
--- a/arch/arm/mach-nuc93x/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := irq.o time.o dev.o cpu.o clock.o
-# NUC932 CPU support files
-
-obj-$(CONFIG_CPU_NUC932) += nuc932.o
-
-# machine support
-
-obj-$(CONFIG_MACH_NUC932EVB) += mach-nuc932evb.o
diff --git a/arch/arm/mach-nuc93x/Makefile.boot b/arch/arm/mach-nuc93x/Makefile.boot
deleted file mode 100644
index 6c3d421..0000000
--- a/arch/arm/mach-nuc93x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-
diff --git a/arch/arm/mach-nuc93x/clock.c b/arch/arm/mach-nuc93x/clock.c
deleted file mode 100644
index 0521efb..0000000
--- a/arch/arm/mach-nuc93x/clock.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/clock.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include "clock.h"
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (clk->enabled++ == 0)
- (clk->enable)(clk, 1);
- spin_unlock_irqrestore(&clocks_lock, flags);
-
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- WARN_ON(clk->enabled == 0);
-
- spin_lock_irqsave(&clocks_lock, flags);
- if (--clk->enabled == 0)
- (clk->enable)(clk, 0);
- spin_unlock_irqrestore(&clocks_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return 27000000;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void nuc93x_clk_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->cken;
- unsigned long clken;
-
- clken = __raw_readl(NUC93X_VA_CLKPWR);
-
- if (enable)
- clken |= clocks;
- else
- clken &= ~clocks;
-
- __raw_writel(clken, NUC93X_VA_CLKPWR);
-}
-
-void clks_register(struct clk_lookup *clks, size_t num)
-{
- int i;
-
- for (i = 0; i < num; i++)
- clkdev_add(&clks[i]);
-}
diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h
deleted file mode 100644
index 4de1f1d..0000000
--- a/arch/arm/mach-nuc93x/clock.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-
-#include <linux/clkdev.h>
-
-void nuc93x_clk_enable(struct clk *clk, int enable);
-void clks_register(struct clk_lookup *clks, size_t num);
-
-struct clk {
- unsigned long cken;
- unsigned int enabled;
- void (*enable)(struct clk *, int enable);
-};
-
-#define DEFINE_CLK(_name, _ctrlbit) \
-struct clk clk_##_name = { \
- .enable = nuc93x_clk_enable, \
- .cken = (1 << _ctrlbit), \
- }
-
-#define DEF_CLKLOOK(_clk, _devname, _conname) \
- { \
- .clk = _clk, \
- .dev_id = _devname, \
- .con_id = _conname, \
- }
-
diff --git a/arch/arm/mach-nuc93x/cpu.c b/arch/arm/mach-nuc93x/cpu.c
deleted file mode 100644
index f6ff5d8..0000000
--- a/arch/arm/mach-nuc93x/cpu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/cpu.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC93x series cpu common support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc nuc93x_iodesc[] __initdata = {
- IODESC_ENT(IRQ),
- IODESC_ENT(GCR),
- IODESC_ENT(UART),
- IODESC_ENT(TIMER),
- IODESC_ENT(EBI),
-};
-
-/* Initial nuc932 clock declarations. */
-static DEFINE_CLK(audio, 2);
-static DEFINE_CLK(sd, 3);
-static DEFINE_CLK(jpg, 4);
-static DEFINE_CLK(video, 5);
-static DEFINE_CLK(vpost, 6);
-static DEFINE_CLK(2d, 7);
-static DEFINE_CLK(gpu, 8);
-static DEFINE_CLK(gdma, 9);
-static DEFINE_CLK(adc, 10);
-static DEFINE_CLK(uart, 11);
-static DEFINE_CLK(spi, 12);
-static DEFINE_CLK(pwm, 13);
-static DEFINE_CLK(timer, 14);
-static DEFINE_CLK(wdt, 15);
-static DEFINE_CLK(ac97, 16);
-static DEFINE_CLK(i2s, 16);
-static DEFINE_CLK(usbck, 17);
-static DEFINE_CLK(usb48, 18);
-static DEFINE_CLK(usbh, 19);
-static DEFINE_CLK(i2c, 20);
-static DEFINE_CLK(ext, 0);
-
-static struct clk_lookup nuc932_clkregs[] = {
- DEF_CLKLOOK(&clk_audio, "nuc932-audio", NULL),
- DEF_CLKLOOK(&clk_sd, "nuc932-sd", NULL),
- DEF_CLKLOOK(&clk_jpg, "nuc932-jpg", "NULL"),
- DEF_CLKLOOK(&clk_video, "nuc932-video", "NULL"),
- DEF_CLKLOOK(&clk_vpost, "nuc932-vpost", NULL),
- DEF_CLKLOOK(&clk_2d, "nuc932-2d", NULL),
- DEF_CLKLOOK(&clk_gpu, "nuc932-gpu", NULL),
- DEF_CLKLOOK(&clk_gdma, "nuc932-gdma", "NULL"),
- DEF_CLKLOOK(&clk_adc, "nuc932-adc", NULL),
- DEF_CLKLOOK(&clk_uart, NULL, "uart"),
- DEF_CLKLOOK(&clk_spi, "nuc932-spi", NULL),
- DEF_CLKLOOK(&clk_pwm, "nuc932-pwm", NULL),
- DEF_CLKLOOK(&clk_timer, NULL, "timer"),
- DEF_CLKLOOK(&clk_wdt, "nuc932-wdt", NULL),
- DEF_CLKLOOK(&clk_ac97, "nuc932-ac97", NULL),
- DEF_CLKLOOK(&clk_i2s, "nuc932-i2s", NULL),
- DEF_CLKLOOK(&clk_usbck, "nuc932-usbck", NULL),
- DEF_CLKLOOK(&clk_usb48, "nuc932-usb48", NULL),
- DEF_CLKLOOK(&clk_usbh, "nuc932-usbh", NULL),
- DEF_CLKLOOK(&clk_i2c, "nuc932-i2c", NULL),
- DEF_CLKLOOK(&clk_ext, NULL, "ext"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port nuc93x_uart_data[] = {
- NUC93X_8250PORT(UART0),
- {},
-};
-
-struct platform_device nuc93x_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = nuc93x_uart_data,
- },
-};
-
-/*Init NUC93x evb io*/
-
-void __init nuc93x_map_io(struct map_desc *mach_desc, int mach_size)
-{
- unsigned long idcode = 0x0;
-
- iotable_init(mach_desc, mach_size);
- iotable_init(nuc93x_iodesc, ARRAY_SIZE(nuc93x_iodesc));
-
- idcode = __raw_readl(NUC93XPDID);
- if (idcode == NUC932_CPUID)
- printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
- else
- printk(KERN_ERR "CPU type detect error!\n");
-
-}
-
-/*Init NUC93x clock*/
-
-void __init nuc93x_init_clocks(void)
-{
- clks_register(nuc932_clkregs, ARRAY_SIZE(nuc932_clkregs));
-}
-
diff --git a/arch/arm/mach-nuc93x/cpu.h b/arch/arm/mach-nuc93x/cpu.h
deleted file mode 100644
index 9def28197..0000000
--- a/arch/arm/mach-nuc93x/cpu.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/cpu.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Header file for NUC93X CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define IODESC_ENT(y) \
-{ \
- .virtual = (unsigned long)NUC93X_VA_##y, \
- .pfn = __phys_to_pfn(NUC93X_PA_##y), \
- .length = NUC93X_SZ_##y, \
- .type = MT_DEVICE, \
-}
-
-#define NUC93X_8250PORT(name) \
-{ \
- .membase = name##_BA, \
- .mapbase = name##_PA, \
- .irq = IRQ_##name, \
- .uartclk = 57139200, \
- .regshift = 2, \
- .iotype = UPIO_MEM, \
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
-}
-
-/*Cpu identifier register*/
-
-#define NUC93XPDID NUC93X_VA_GCR
-#define NUC932_CPUID 0x29550091
-
-/* extern file from cpu.c */
-
-extern void nuc93x_clock_source(struct device *dev, unsigned char *src);
-extern void nuc93x_init_clocks(void);
-extern void nuc93x_map_io(struct map_desc *mach_desc, int mach_size);
-extern void nuc93x_board_init(struct platform_device **device, int size);
-extern struct platform_device nuc93x_serial_device;
-
diff --git a/arch/arm/mach-nuc93x/dev.c b/arch/arm/mach-nuc93x/dev.c
deleted file mode 100644
index a962ae9..0000000
--- a/arch/arm/mach-nuc93x/dev.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/dev.c
- *
- * Copyright (C) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include "cpu.h"
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *nuc93x_public_dev[] __initdata = {
- &nuc93x_serial_device,
-};
-
-/* Provide adding specific CPU platform devices API */
-
-void __init nuc93x_board_init(struct platform_device **device, int size)
-{
- platform_add_devices(device, size);
- platform_add_devices(nuc93x_public_dev, ARRAY_SIZE(nuc93x_public_dev));
-}
-
diff --git a/arch/arm/mach-nuc93x/include/mach/entry-macro.S b/arch/arm/mach-nuc93x/include/mach/entry-macro.S
deleted file mode 100644
index 1352cbd..0000000
--- a/arch/arm/mach-nuc93x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/entry-macro.S
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- */
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #AIC_BA
-
- ldr \irqnr, [ \base, #AIC_IPER]
- ldr \irqnr, [ \base, #AIC_ISNR]
- cmp \irqnr, #0
-
- .endm
-
- /* currently don't need an disable_fiq macro */
-
- .macro disable_fiq
- .endm
diff --git a/arch/arm/mach-nuc93x/include/mach/hardware.h b/arch/arm/mach-nuc93x/include/mach/hardware.h
deleted file mode 100644
index fb5c6fc..0000000
--- a/arch/arm/mach-nuc93x/include/mach/hardware.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/hardware.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <mach/map.h>
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/io.h b/arch/arm/mach-nuc93x/include/mach/io.h
deleted file mode 100644
index 72e5051..0000000
--- a/arch/arm/mach-nuc93x/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/io.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * 1:1 mapping for ioremapped regions.
- */
-
-#define __mem_pci(a) (a)
-#define __io(a) __typesafe_io(a)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/irqs.h b/arch/arm/mach-nuc93x/include/mach/irqs.h
deleted file mode 100644
index 7c4aa71..0000000
--- a/arch/arm/mach-nuc93x/include/mach/irqs.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/irqs.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NUC93X_IRQ(x) (x)
-
-/* Main cpu interrupts */
-
-#define IRQ_WDT NUC93X_IRQ(1)
-#define IRQ_IRQ0 NUC93X_IRQ(2)
-#define IRQ_IRQ1 NUC93X_IRQ(3)
-#define IRQ_IRQ2 NUC93X_IRQ(4)
-#define IRQ_IRQ3 NUC93X_IRQ(5)
-#define IRQ_USBH NUC93X_IRQ(6)
-#define IRQ_APU NUC93X_IRQ(7)
-#define IRQ_VPOST NUC93X_IRQ(8)
-#define IRQ_ADC NUC93X_IRQ(9)
-#define IRQ_UART0 NUC93X_IRQ(10)
-#define IRQ_TIMER0 NUC93X_IRQ(11)
-#define IRQ_GPU0 NUC93X_IRQ(12)
-#define IRQ_GPU1 NUC93X_IRQ(13)
-#define IRQ_GPU2 NUC93X_IRQ(14)
-#define IRQ_GPU3 NUC93X_IRQ(15)
-#define IRQ_GPU4 NUC93X_IRQ(16)
-#define IRQ_VIN NUC93X_IRQ(17)
-#define IRQ_USBD NUC93X_IRQ(18)
-#define IRQ_VRAMLD NUC93X_IRQ(19)
-#define IRQ_GDMA0 NUC93X_IRQ(20)
-#define IRQ_GDMA1 NUC93X_IRQ(21)
-#define IRQ_SDIO NUC93X_IRQ(22)
-#define IRQ_FMI NUC93X_IRQ(22)
-#define IRQ_JPEG NUC93X_IRQ(23)
-#define IRQ_SPI0 NUC93X_IRQ(24)
-#define IRQ_SPI1 NUC93X_IRQ(25)
-#define IRQ_RTC NUC93X_IRQ(26)
-#define IRQ_PWM0 NUC93X_IRQ(27)
-#define IRQ_PWM1 NUC93X_IRQ(28)
-#define IRQ_PWM2 NUC93X_IRQ(29)
-#define IRQ_PWM3 NUC93X_IRQ(30)
-#define IRQ_I2SAC97 NUC93X_IRQ(31)
-#define IRQ_CAP0 IRQ_PWM0
-#define IRQ_CAP1 IRQ_PWM1
-#define IRQ_CAP2 IRQ_PWM2
-#define IRQ_CAP3 IRQ_PWM3
-#define NR_IRQS (IRQ_I2SAC97 + 1)
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/map.h b/arch/arm/mach-nuc93x/include/mach/map.h
deleted file mode 100644
index fd0b5e8..0000000
--- a/arch/arm/mach-nuc93x/include/mach/map.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/map.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_MAP_H
-#define __ASM_ARCH_MAP_H
-
-#define MAP_OFFSET (0xfff00000)
-#define CLK_OFFSET (0x10)
-
-#ifndef __ASSEMBLY__
-#define NUC93X_ADDR(x) ((void __iomem *)(0xF0000000 + ((x)&(~MAP_OFFSET))))
-#else
-#define NUC93X_ADDR(x) (0xF0000000 + ((x)&(~MAP_OFFSET)))
-#endif
-
- /*
- * nuc932 hardware register definition
- */
-
-#define NUC93X_PA_IRQ (0xFFF83000)
-#define NUC93X_PA_GCR (0xFFF00000)
-#define NUC93X_PA_EBI (0xFFF01000)
-#define NUC93X_PA_UART (0xFFF80000)
-#define NUC93X_PA_TIMER (0xFFF81000)
-#define NUC93X_PA_GPIO (0xFFF84000)
-#define NUC93X_PA_GDMA (0xFFF03000)
-#define NUC93X_PA_USBHOST (0xFFF0d000)
-#define NUC93X_PA_I2C (0xFFF89000)
-#define NUC93X_PA_LCD (0xFFF06000)
-#define NUC93X_PA_GE (0xFFF05000)
-#define NUC93X_PA_ADC (0xFFF85000)
-#define NUC93X_PA_RTC (0xFFF87000)
-#define NUC93X_PA_PWM (0xFFF82000)
-#define NUC93X_PA_ACTL (0xFFF0a000)
-#define NUC93X_PA_USBDEV (0xFFF0C000)
-#define NUC93X_PA_JEPEG (0xFFF0e000)
-#define NUC93X_PA_CACHE_T (0xFFF60000)
-#define NUC93X_PA_VRAM (0xFFF0b000)
-#define NUC93X_PA_DMAC (0xFFF09000)
-#define NUC93X_PA_I2SM (0xFFF08000)
-#define NUC93X_PA_CACHE (0xFFF02000)
-#define NUC93X_PA_GPU (0xFFF04000)
-#define NUC93X_PA_VIDEOIN (0xFFF07000)
-#define NUC93X_PA_SPI0 (0xFFF86000)
-#define NUC93X_PA_SPI1 (0xFFF88000)
-
- /*
- * nuc932 virtual address mapping.
- * interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-
-#define NUC93X_VA_IRQ NUC93X_ADDR(0x00000000)
-#define NUC93X_SZ_IRQ SZ_4K
-
-#define NUC93X_VA_GCR NUC93X_ADDR(NUC93X_PA_IRQ)
-#define NUC93X_VA_CLKPWR (NUC93X_VA_GCR+CLK_OFFSET)
-#define NUC93X_SZ_GCR SZ_4K
-
-/* EBI management */
-
-#define NUC93X_VA_EBI NUC93X_ADDR(NUC93X_PA_EBI)
-#define NUC93X_SZ_EBI SZ_4K
-
-/* UARTs */
-
-#define NUC93X_VA_UART NUC93X_ADDR(NUC93X_PA_UART)
-#define NUC93X_SZ_UART SZ_4K
-
-/* Timers */
-
-#define NUC93X_VA_TIMER NUC93X_ADDR(NUC93X_PA_TIMER)
-#define NUC93X_SZ_TIMER SZ_4K
-
-/* GPIO ports */
-
-#define NUC93X_VA_GPIO NUC93X_ADDR(NUC93X_PA_GPIO)
-#define NUC93X_SZ_GPIO SZ_4K
-
-/* GDMA control */
-
-#define NUC93X_VA_GDMA NUC93X_ADDR(NUC93X_PA_GDMA)
-#define NUC93X_SZ_GDMA SZ_4K
-
-/* I2C hardware controller */
-
-#define NUC93X_VA_I2C NUC93X_ADDR(NUC93X_PA_I2C)
-#define NUC93X_SZ_I2C SZ_4K
-
-/* LCD controller*/
-
-#define NUC93X_VA_LCD NUC93X_ADDR(NUC93X_PA_LCD)
-#define NUC93X_SZ_LCD SZ_4K
-
-/* 2D controller*/
-
-#define NUC93X_VA_GE NUC93X_ADDR(NUC93X_PA_GE)
-#define NUC93X_SZ_GE SZ_4K
-
-/* ADC */
-
-#define NUC93X_VA_ADC NUC93X_ADDR(NUC93X_PA_ADC)
-#define NUC93X_SZ_ADC SZ_4K
-
-/* RTC */
-
-#define NUC93X_VA_RTC NUC93X_ADDR(NUC93X_PA_RTC)
-#define NUC93X_SZ_RTC SZ_4K
-
-/* Pulse Width Modulation(PWM) Registers */
-
-#define NUC93X_VA_PWM NUC93X_ADDR(NUC93X_PA_PWM)
-#define NUC93X_SZ_PWM SZ_4K
-
-/* Audio Controller controller */
-
-#define NUC93X_VA_ACTL NUC93X_ADDR(NUC93X_PA_ACTL)
-#define NUC93X_SZ_ACTL SZ_4K
-
-/* USB Device port */
-
-#define NUC93X_VA_USBDEV NUC93X_ADDR(NUC93X_PA_USBDEV)
-#define NUC93X_SZ_USBDEV SZ_4K
-
-/* USB host controller*/
-#define NUC93X_VA_USBHOST NUC93X_ADDR(NUC93X_PA_USBHOST)
-#define NUC93X_SZ_USBHOST SZ_4K
-
-#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-clock.h b/arch/arm/mach-nuc93x/include/mach/regs-clock.h
deleted file mode 100644
index 5cb2954..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-clock.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-clock.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_CLOCK_H
-#define __ASM_ARCH_REGS_CLOCK_H
-
-/* Clock Control Registers */
-#define CLK_BA NUC93X_VA_CLKPWR
-#define REG_CLKEN (CLK_BA + 0x00)
-#define REG_CLKSEL (CLK_BA + 0x04)
-#define REG_CLKDIV (CLK_BA + 0x08)
-#define REG_PLLCON0 (CLK_BA + 0x0C)
-#define REG_PLLCON1 (CLK_BA + 0x10)
-#define REG_PMCON (CLK_BA + 0x14)
-#define REG_IRQWAKECON (CLK_BA + 0x18)
-#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
-#define REG_IPSRST (CLK_BA + 0x20)
-#define REG_CLKEN1 (CLK_BA + 0x24)
-#define REG_CLKDIV1 (CLK_BA + 0x28)
-
-/* Define PLL freq setting */
-#define PLL_DISABLE 0x12B63
-#define PLL_66MHZ 0x2B63
-#define PLL_100MHZ 0x4F64
-#define PLL_120MHZ 0x4F63
-#define PLL_166MHZ 0x4124
-#define PLL_200MHZ 0x4F24
-
-/* Define AHB:CPUFREQ ratio */
-#define AHB_CPUCLK_1_1 0x00
-#define AHB_CPUCLK_1_2 0x01
-#define AHB_CPUCLK_1_4 0x02
-#define AHB_CPUCLK_1_8 0x03
-
-/* Define APB:AHB ratio */
-#define APB_AHB_1_2 0x01
-#define APB_AHB_1_4 0x02
-#define APB_AHB_1_8 0x03
-
-/* Define clock skew */
-#define DEFAULTSKEW 0x48
-
-#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h b/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
deleted file mode 100644
index 3c72550..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-ebi.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-ebi.h
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_EBI_H
-#define __ASM_ARCH_REGS_EBI_H
-
-/* EBI Control Registers */
-
-#define EBI_BA NUC93X_VA_EBI
-#define REG_EBICON (EBI_BA + 0x00)
-#define REG_ROMCON (EBI_BA + 0x04)
-#define REG_SDCONF0 (EBI_BA + 0x08)
-#define REG_SDCONF1 (EBI_BA + 0x0C)
-#define REG_SDTIME0 (EBI_BA + 0x10)
-#define REG_SDTIME1 (EBI_BA + 0x14)
-#define REG_EXT0CON (EBI_BA + 0x18)
-#define REG_EXT1CON (EBI_BA + 0x1C)
-#define REG_EXT2CON (EBI_BA + 0x20)
-#define REG_EXT3CON (EBI_BA + 0x24)
-#define REG_EXT4CON (EBI_BA + 0x28)
-#define REG_CKSKEW (EBI_BA + 0x2C)
-
-#endif /* __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-irq.h b/arch/arm/mach-nuc93x/include/mach/regs-irq.h
deleted file mode 100644
index 2302159..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-irq.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-irq.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H
-
-/* Advance Interrupt Controller (AIC) Registers */
-
-#define AIC_BA NUC93X_VA_IRQ
-
-#define REG_AIC_IRQSC (AIC_BA+0x80)
-#define REG_AIC_GEN (AIC_BA+0x84)
-#define REG_AIC_GASR (AIC_BA+0x88)
-#define REG_AIC_GSCR (AIC_BA+0x8C)
-#define REG_AIC_IRSR (AIC_BA+0x100)
-#define REG_AIC_IASR (AIC_BA+0x104)
-#define REG_AIC_ISR (AIC_BA+0x108)
-#define REG_AIC_IPER (AIC_BA+0x10C)
-#define REG_AIC_ISNR (AIC_BA+0x110)
-#define REG_AIC_IMR (AIC_BA+0x114)
-#define REG_AIC_OISR (AIC_BA+0x118)
-#define REG_AIC_MECR (AIC_BA+0x120)
-#define REG_AIC_MDCR (AIC_BA+0x124)
-#define REG_AIC_SSCR (AIC_BA+0x128)
-#define REG_AIC_SCCR (AIC_BA+0x12C)
-#define REG_AIC_EOSCR (AIC_BA+0x130)
-#define AIC_IPER (0x10C)
-#define AIC_ISNR (0x110)
-
-#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-serial.h b/arch/arm/mach-nuc93x/include/mach/regs-serial.h
deleted file mode 100644
index 767a047..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-serial.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-serial.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARM_REGS_SERIAL_H
-#define __ASM_ARM_REGS_SERIAL_H
-
-#define UART0_BA NUC93X_VA_UART
-#define UART1_BA (NUC93X_VA_UART+0x100)
-
-#define UART0_PA NUC93X_PA_UART
-#define UART1_PA (NUC93X_PA_UART+0x100)
-
-
-#ifndef __ASSEMBLY__
-
-struct nuc93x_uart_clksrc {
- const char *name;
- unsigned int divisor;
- unsigned int min_baud;
- unsigned int max_baud;
-};
-
-struct nuc93x_uartcfg {
- unsigned char hwport;
- unsigned char unused;
- unsigned short flags;
- unsigned long uart_flags;
-
- unsigned long ucon;
- unsigned long ulcon;
- unsigned long ufcon;
-
- struct nuc93x_uart_clksrc *clocks;
- unsigned int clocks_size;
-};
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __ASM_ARM_REGS_SERIAL_H */
-
diff --git a/arch/arm/mach-nuc93x/include/mach/regs-timer.h b/arch/arm/mach-nuc93x/include/mach/regs-timer.h
deleted file mode 100644
index 394be96..0000000
--- a/arch/arm/mach-nuc93x/include/mach/regs-timer.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/regs-timer.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H
-
-/* Timer Registers */
-
-#define TMR_BA NUC93X_VA_TIMER
-#define REG_TCSR0 (TMR_BA+0x00)
-#define REG_TICR0 (TMR_BA+0x08)
-#define REG_TDR0 (TMR_BA+0x10)
-#define REG_TISR (TMR_BA+0x18)
-#define REG_WTCR (TMR_BA+0x1C)
-
-#endif /* __ASM_ARCH_REGS_TIMER_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/system.h b/arch/arm/mach-nuc93x/include/mach/system.h
deleted file mode 100644
index d26bd9a..0000000
--- a/arch/arm/mach-nuc93x/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/machnuc93x/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <asm/proc-fns.h>
-
-static void arch_idle(void)
-{
-}
-
-static void arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
diff --git a/arch/arm/mach-nuc93x/include/mach/timex.h b/arch/arm/mach-nuc93x/include/mach/timex.h
deleted file mode 100644
index 0c719cc..0000000
--- a/arch/arm/mach-nuc93x/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/timex.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE Now, I don't use it. */
-
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/uncompress.h b/arch/arm/mach-nuc93x/include/mach/uncompress.h
deleted file mode 100644
index 381cb9b..0000000
--- a/arch/arm/mach-nuc93x/include/mach/uncompress.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/uncompress.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-/* Defines for UART registers */
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-#include <linux/serial_reg.h>
-
-#define arch_decomp_wdog()
-
-#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
-static u32 * const uart_base = (u32 *)UART0_PA;
-
-static void putc(int ch)
-{
- /* Check THRE and TEMT bits before we transmit the character.
- */
- while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
- barrier();
-
- *uart_base = ch;
-}
-
-static inline void flush(void)
-{
-}
-
-static void arch_decomp_setup(void)
-{
-}
-
-#endif/* __ASM_NUC93X_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h
deleted file mode 100644
index 7d11a5f..0000000
--- a/arch/arm/mach-nuc93x/include/mach/vmalloc.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/vmalloc.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END 0xE0000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-nuc93x/irq.c b/arch/arm/mach-nuc93x/irq.c
deleted file mode 100644
index aa279f2..0000000
--- a/arch/arm/mach-nuc93x/irq.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/irq.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-irq.h>
-
-static void nuc93x_irq_mask(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, REG_AIC_MDCR);
-}
-
-/*
- * By the w90p910 spec,any irq,only write 1
- * to REG_AIC_EOSCR for ACK
- */
-
-static void nuc93x_irq_ack(struct irq_data *d)
-{
- __raw_writel(0x01, REG_AIC_EOSCR);
-}
-
-static void nuc93x_irq_unmask(struct irq_data *d)
-{
- __raw_writel(1 << d->irq, REG_AIC_MECR);
-
-}
-
-static struct irq_chip nuc93x_irq_chip = {
- .irq_ack = nuc93x_irq_ack,
- .irq_mask = nuc93x_irq_mask,
- .irq_unmask = nuc93x_irq_unmask,
-};
-
-void __init nuc93x_init_irq(void)
-{
- int irqno;
-
- __raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
-
- for (irqno = IRQ_WDT; irqno <= NR_IRQS; irqno++) {
- irq_set_chip_and_handler(irqno, &nuc93x_irq_chip,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
deleted file mode 100644
index 1f741b1..0000000
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-#include <mach/map.h>
-
-#include "nuc932.h"
-
-static void __init nuc932evb_map_io(void)
-{
- nuc932_map_io();
- nuc932_init_clocks();
- nuc932_init_uartclk();
-}
-
-static void __init nuc932evb_init(void)
-{
- nuc932_board_init();
-}
-
-MACHINE_START(NUC932EVB, "NUC932EVB")
- /* Maintainer: Wan ZongShun */
- .map_io = nuc932evb_map_io,
- .init_irq = nuc93x_init_irq,
- .init_machine = nuc932evb_init,
- .timer = &nuc93x_timer,
-MACHINE_END
diff --git a/arch/arm/mach-nuc93x/nuc932.c b/arch/arm/mach-nuc93x/nuc932.c
deleted file mode 100644
index 3966ead..0000000
--- a/arch/arm/mach-nuc93x/nuc932.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/nuc932.c
- *
- * Copyright (c) 2009 Nuvoton corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * NUC932 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* define specific CPU platform device */
-
-static struct platform_device *nuc932_dev[] __initdata = {
-};
-
-/* define specific CPU platform io map */
-
-static struct map_desc nuc932evb_iodesc[] __initdata = {
-};
-
-/*Init NUC932 evb io*/
-
-void __init nuc932_map_io(void)
-{
- nuc93x_map_io(nuc932evb_iodesc, ARRAY_SIZE(nuc932evb_iodesc));
-}
-
-/*Init NUC932 clock*/
-
-void __init nuc932_init_clocks(void)
-{
- nuc93x_init_clocks();
-}
-
-/*enable NUC932 uart clock*/
-
-void __init nuc932_init_uartclk(void)
-{
- struct clk *ck_uart = clk_get(NULL, "uart");
- BUG_ON(IS_ERR(ck_uart));
-
- clk_enable(ck_uart);
-}
-
-/*Init NUC932 board info*/
-
-void __init nuc932_board_init(void)
-{
- nuc93x_board_init(nuc932_dev, ARRAY_SIZE(nuc932_dev));
-}
diff --git a/arch/arm/mach-nuc93x/nuc932.h b/arch/arm/mach-nuc93x/nuc932.h
deleted file mode 100644
index 9a66edd..0000000
--- a/arch/arm/mach-nuc93x/nuc932.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/nuc932.h
- *
- * Copyright (c) 2008 Nuvoton corporation
- *
- * Header file for NUC93x CPU support
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void nuc93x_init_irq(void);
-extern struct sys_timer nuc93x_timer;
-
-/* extern file from nuc932.c */
-
-extern void nuc932_board_init(void);
-extern void nuc932_init_clocks(void);
-extern void nuc932_map_io(void);
-extern void nuc932_init_uartclk(void);
diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
deleted file mode 100644
index f9807c0..0000000
--- a/arch/arm/mach-nuc93x/time.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/time.c
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/system.h>
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#define RESETINT 0x01
-#define PERIOD (0x01 << 27)
-#define ONESHOT (0x00 << 27)
-#define COUNTEN (0x01 << 30)
-#define INTEN (0x01 << 29)
-
-#define TICKS_PER_SEC 100
-#define PRESCALE 0x63 /* Divider = prescale + 1 */
-
-unsigned int timer0_load;
-
-static unsigned long nuc93x_gettimeoffset(void)
-{
- return 0;
-}
-
-/*IRQ handler for the timer*/
-
-static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- __raw_writel(0x01, REG_TISR); /* clear TIF0 */
- return IRQ_HANDLED;
-}
-
-static struct irqaction nuc93x_timer_irq = {
- .name = "nuc93x Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = nuc93x_timer_interrupt,
-};
-
-/*Set up timer reg.*/
-
-static void nuc93x_timer_setup(void)
-{
- struct clk *ck_ext = clk_get(NULL, "ext");
- struct clk *ck_timer = clk_get(NULL, "timer");
- unsigned int rate, val = 0;
-
- BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
-
- clk_enable(ck_timer);
- rate = clk_get_rate(ck_ext);
- clk_put(ck_ext);
- rate = rate / (PRESCALE + 0x01);
-
- /* set a known state */
- __raw_writel(0x00, REG_TCSR0);
- __raw_writel(RESETINT, REG_TISR);
-
- timer0_load = (rate / TICKS_PER_SEC);
- __raw_writel(timer0_load, REG_TICR0);
-
- val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
- __raw_writel(val, REG_TCSR0);
-
-}
-
-static void __init nuc93x_timer_init(void)
-{
- nuc93x_timer_setup();
- setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
-}
-
-struct sys_timer nuc93x_timer = {
- .init = nuc93x_timer_init,
- .offset = nuc93x_gettimeoffset,
- .resume = nuc93x_timer_setup
-};
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 5b114d1..11c85cd 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,7 +4,7 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 4ea60e2..1f1db76 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -134,12 +134,6 @@
*(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
}
-static void __init ams_delta_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
@@ -378,17 +372,13 @@
}
arch_initcall(ams_delta_modem_init);
-static void __init ams_delta_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
- .map_io = ams_delta_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = ams_delta_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 31e089b..2317827 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -296,63 +296,6 @@
static void __init omap_fsample_init(void)
{
- fsample_init_smc91x();
-
- if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
- BUG();
- gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
-
- omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
- omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
- /* Mux pins for keypad */
- omap_cfg_reg(E2_7XX_KBR0);
- omap_cfg_reg(J7_7XX_KBR1);
- omap_cfg_reg(E1_7XX_KBR2);
- omap_cfg_reg(F3_7XX_KBR3);
- omap_cfg_reg(D2_7XX_KBR4);
- omap_cfg_reg(C2_7XX_KBC0);
- omap_cfg_reg(D3_7XX_KBC1);
- omap_cfg_reg(E4_7XX_KBC2);
- omap_cfg_reg(F4_7XX_KBC3);
- omap_cfg_reg(E3_7XX_KBC4);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- omap_board_config = fsample_config;
- omap_board_config_size = ARRAY_SIZE(fsample_config);
- omap_serial_init();
- omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-static void __init omap_fsample_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
- {
- .virtual = H2P2_DBG_FPGA_BASE,
- .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
- .length = H2P2_DBG_FPGA_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = FSAMPLE_CPLD_BASE,
- .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
- .length = FSAMPLE_CPLD_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init omap_fsample_map_io(void)
-{
- omap1_map_common_io();
- iotable_init(omap_fsample_io_desc,
- ARRAY_SIZE(omap_fsample_io_desc));
-
/* Early, board-dependent init */
/*
@@ -383,15 +326,68 @@
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
- omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+ OMAP7XX_IO_CONF_9);
+
+ fsample_init_smc91x();
+
+ if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+ BUG();
+ gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
+
+ omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+ omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+ /* Mux pins for keypad */
+ omap_cfg_reg(E2_7XX_KBR0);
+ omap_cfg_reg(J7_7XX_KBR1);
+ omap_cfg_reg(E1_7XX_KBR2);
+ omap_cfg_reg(F3_7XX_KBR3);
+ omap_cfg_reg(D2_7XX_KBR4);
+ omap_cfg_reg(C2_7XX_KBC0);
+ omap_cfg_reg(D3_7XX_KBC1);
+ omap_cfg_reg(E4_7XX_KBC2);
+ omap_cfg_reg(F4_7XX_KBC3);
+ omap_cfg_reg(E3_7XX_KBC4);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ omap_board_config = fsample_config;
+ omap_board_config_size = ARRAY_SIZE(fsample_config);
+ omap_serial_init();
+ omap_register_i2c_bus(1, 100, NULL, 0);
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_fsample_io_desc[] __initdata = {
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = FSAMPLE_CPLD_BASE,
+ .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
+ .length = FSAMPLE_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init omap_fsample_map_io(void)
+{
+ omap15xx_map_io();
+ iotable_init(omap_fsample_io_desc,
+ ARRAY_SIZE(omap_fsample_io_desc));
}
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
/* Maintainer: Brian Swetland <swetland@google.com> */
.atag_offset = 0x100,
.map_io = omap_fsample_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_fsample_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 05c6e9d..dc5b75d 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -27,12 +27,6 @@
#include <plat/board.h>
#include <plat/common.h>
-static void __init omap_generic_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
/* assume no Mini-AB port */
#ifdef CONFIG_ARCH_OMAP15XX
@@ -86,17 +80,13 @@
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_generic_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
/* Maintainer: Tony Lindgren <tony@atomide.com> */
.atag_offset = 0x100,
- .map_io = omap_generic_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_generic_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index c2e2791..b334b14 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -372,12 +372,6 @@
},
};
-static void __init h2_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config h2_usb_config __initdata = {
/* usb1 has a Mini-AB port and external isp1301 transceiver */
.otg = 2,
@@ -453,17 +447,13 @@
h2_mmc_init();
}
-static void __init h2_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
.atag_offset = 0x100,
- .map_io = h2_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = h2_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = h2_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 8f5b6af..74ebe72 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -435,23 +435,13 @@
h3_mmc_init();
}
-static void __init h3_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-static void __init h3_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
.atag_offset = 0x100,
- .map_io = h3_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = h3_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = h3_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index fcd1a3c..3e91baa 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -499,7 +499,7 @@
static void __init htcherald_map_io(void)
{
- omap1_map_common_io();
+ omap7xx_map_io();
/*
* The LCD panel must be disabled and DMA turned off here, as doing
@@ -600,20 +600,14 @@
#endif
}
-static void __init htcherald_init_irq(void)
-{
- printk(KERN_INFO "htcherald_init_irq.\n");
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
MACHINE_START(HERALD, "HTC Herald")
/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
/* Maintainer: wing-linux.sourceforge.net */
.atag_offset = 0x100,
.map_io = htcherald_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = htcherald_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index c2234ca..273153d 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -288,12 +288,6 @@
}
}
-static void __init innovator_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
#ifdef CONFIG_ARCH_OMAP15XX
static struct omap_usb_config innovator1510_usb_config __initdata = {
/* for bundled non-standard host and peripheral cables */
@@ -438,30 +432,32 @@
innovator_mmc_init();
}
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
static void __init innovator_map_io(void)
{
- omap1_map_common_io();
+ omap15xx_map_io();
-#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap1510()) {
- iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
- udelay(10); /* Delay needed for FPGA */
+ iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+ udelay(10); /* Delay needed for FPGA */
- /* Dump the Innovator FPGA rev early - useful info for support. */
- printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
- fpga_read(OMAP1510_FPGA_REV_HIGH),
- fpga_read(OMAP1510_FPGA_REV_LOW),
- fpga_read(OMAP1510_FPGA_BOARD_REV));
- }
-#endif
+ /* Dump the Innovator FPGA rev early - useful info for support. */
+ pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
+ fpga_read(OMAP1510_FPGA_REV_HIGH),
+ fpga_read(OMAP1510_FPGA_REV_LOW),
+ fpga_read(OMAP1510_FPGA_BOARD_REV));
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
/* Maintainer: MontaVista Software, Inc. */
.atag_offset = 0x100,
.map_io = innovator_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = innovator_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = innovator_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 02789c5..6798b84 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -38,21 +38,6 @@
#define ADS7846_PENDOWN_GPIO 15
-static void __init omap_nokia770_init_irq(void)
-{
- /* On Nokia 770, the SleepX signal is masked with an
- * MPUIO line by default. It has to be unmasked for it
- * to become functional */
-
- /* SleepX mask direction */
- omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
- /* Unmask SleepX signal */
- omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
-
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int nokia770_keymap[] = {
KEY(1, 0, GROUP_0 | KEY_UP),
KEY(2, 0, GROUP_1 | KEY_F5),
@@ -245,6 +230,15 @@
static void __init omap_nokia770_init(void)
{
+ /* On Nokia 770, the SleepX signal is masked with an
+ * MPUIO line by default. It has to be unmasked for it
+ * to become functional */
+
+ /* SleepX mask direction */
+ omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+ /* Unmask SleepX signal */
+ omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+
platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
spi_register_board_info(nokia770_spi_board_info,
ARRAY_SIZE(nokia770_spi_board_info));
@@ -257,16 +251,12 @@
nokia770_mmc_init();
}
-static void __init omap_nokia770_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(NOKIA770, "Nokia 770")
.atag_offset = 0x100,
- .map_io = omap_nokia770_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_nokia770_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e4dca1d..c385927 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -278,12 +278,6 @@
irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
}
-static void __init osk_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config osk_usb_config __initdata = {
/* has usb host connector (A) ... for development it can also
* be used, with a NONSTANDARD gender-bending cable/dongle, as
@@ -575,17 +569,13 @@
osk_mistral_init();
}
-static void __init osk_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_OSK, "TI-OSK")
/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
.atag_offset = 0x100,
- .map_io = osk_map_io,
+ .map_io = omap16xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = osk_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = osk_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 50c4e39..f9c44cb 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -58,12 +58,6 @@
#define PALMTE_MMC2_GPIO OMAP_MPUIO(7)
#define PALMTE_MMC3_GPIO OMAP_MPUIO(11)
-static void __init omap_palmte_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int palmte_keymap[] = {
KEY(0, 0, KEY_F1), /* Calendar */
KEY(1, 0, KEY_F2), /* Contacts */
@@ -268,16 +262,12 @@
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_palmte_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.atag_offset = 0x100,
- .map_io = omap_palmte_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmte_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 273771c..11a9853 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -263,12 +263,6 @@
}
};
-static void __init omap_palmtt_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static struct omap_usb_config palmtt_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0,
@@ -315,16 +309,12 @@
omap_register_i2c_bus(1, 100, NULL, 0);
}
-static void __init omap_palmtt_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.atag_offset = 0x100,
- .map_io = omap_palmtt_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmtt_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index de36ade..c6fe61d 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -57,13 +57,6 @@
#define PALMZ71_SLIDER_GPIO OMAP_MPUIO(3)
#define PALMZ71_MMC_IN_GPIO OMAP_MPUIO(4)
-static void __init
-omap_palmz71_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
static const unsigned int palmz71_keymap[] = {
KEY(0, 0, KEY_F1),
KEY(1, 0, KEY_F2),
@@ -334,17 +327,12 @@
palmz71_gpio_setup(0);
}
-static void __init
-omap_palmz71_map_io(void)
-{
- omap1_map_common_io();
-}
-
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
.atag_offset = 0x100,
- .map_io = omap_palmz71_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_palmz71_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 04b1bef..203ae07 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -264,56 +264,6 @@
static void __init omap_perseus2_init(void)
{
- perseus2_init_smc91x();
-
- if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
- BUG();
- gpio_direction_input(P2_NAND_RB_GPIO_PIN);
-
- omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
- omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
- /* Mux pins for keypad */
- omap_cfg_reg(E2_7XX_KBR0);
- omap_cfg_reg(J7_7XX_KBR1);
- omap_cfg_reg(E1_7XX_KBR2);
- omap_cfg_reg(F3_7XX_KBR3);
- omap_cfg_reg(D2_7XX_KBR4);
- omap_cfg_reg(C2_7XX_KBC0);
- omap_cfg_reg(D3_7XX_KBC1);
- omap_cfg_reg(E4_7XX_KBC2);
- omap_cfg_reg(F4_7XX_KBC3);
- omap_cfg_reg(E3_7XX_KBC4);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- omap_board_config = perseus2_config;
- omap_board_config_size = ARRAY_SIZE(perseus2_config);
- omap_serial_init();
- omap_register_i2c_bus(1, 100, NULL, 0);
-}
-
-static void __init omap_perseus2_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_perseus2_io_desc[] __initdata = {
- {
- .virtual = H2P2_DBG_FPGA_BASE,
- .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
- .length = H2P2_DBG_FPGA_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init omap_perseus2_map_io(void)
-{
- omap1_map_common_io();
- iotable_init(omap_perseus2_io_desc,
- ARRAY_SIZE(omap_perseus2_io_desc));
-
/* Early, board-dependent init */
/*
@@ -344,15 +294,62 @@
* Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
* It is used as the Ethernet controller interrupt
*/
- omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
+ omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+ OMAP7XX_IO_CONF_9);
+
+ perseus2_init_smc91x();
+
+ if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+ BUG();
+ gpio_direction_input(P2_NAND_RB_GPIO_PIN);
+
+ omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+ omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+ /* Mux pins for keypad */
+ omap_cfg_reg(E2_7XX_KBR0);
+ omap_cfg_reg(J7_7XX_KBR1);
+ omap_cfg_reg(E1_7XX_KBR2);
+ omap_cfg_reg(F3_7XX_KBR3);
+ omap_cfg_reg(D2_7XX_KBR4);
+ omap_cfg_reg(C2_7XX_KBC0);
+ omap_cfg_reg(D3_7XX_KBC1);
+ omap_cfg_reg(E4_7XX_KBC2);
+ omap_cfg_reg(F4_7XX_KBC3);
+ omap_cfg_reg(E3_7XX_KBC4);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ omap_board_config = perseus2_config;
+ omap_board_config_size = ARRAY_SIZE(perseus2_config);
+ omap_serial_init();
+ omap_register_i2c_bus(1, 100, NULL, 0);
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_perseus2_io_desc[] __initdata = {
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init omap_perseus2_map_io(void)
+{
+ omap7xx_map_io();
+ iotable_init(omap_perseus2_io_desc,
+ ARRAY_SIZE(omap_perseus2_io_desc));
}
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
.atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_perseus2_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 2bea941..667a7cb 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -406,24 +406,13 @@
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
}
-/*----------------------------------------*/
-static void __init omap_sx1_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-/*----------------------------------------*/
-
-static void __init omap_sx1_map_io(void)
-{
- omap1_map_common_io();
-}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.atag_offset = 0x100,
- .map_io = omap_sx1_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = omap_sx1_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 940faed..2a6545b 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -159,17 +159,6 @@
static struct omap_board_config_kernel voiceblue_config[] = {
};
-static void __init voiceblue_init_irq(void)
-{
- omap1_init_common_hw();
- omap1_init_irq();
-}
-
-static void __init voiceblue_map_io(void)
-{
- omap1_map_common_io();
-}
-
#define MACHINE_PANICED 1
#define MACHINE_REBOOTING 2
#define MACHINE_REBOOT 4
@@ -302,9 +291,10 @@
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
.atag_offset = 0x100,
- .map_io = voiceblue_map_io,
+ .map_io = omap15xx_map_io,
+ .init_early = omap1_init_early,
.reserve = omap_reserve,
- .init_irq = voiceblue_init_irq,
+ .init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.timer = &omap1_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 7c50ecf..48ef988 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -22,6 +22,7 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include <plat/common.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
@@ -291,6 +292,8 @@
if (!cpu_class_is_omap1())
return -ENODEV;
+ omap_sram_init();
+
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 1cfa1b6..7969cfd 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -21,7 +21,6 @@
#include "clock.h"
extern void omap_check_revision(void);
-extern void omap_sram_init(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -85,51 +84,45 @@
#endif
/*
- * Maps common IO regions for omap1. This should only get called from
- * board specific init.
+ * Maps common IO regions for omap1
*/
-void __init omap1_map_common_io(void)
+static void __init omap1_map_common_io(void)
{
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
-
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- /* We want to check CPU revision early for cpu_is_omapxxxx() macros.
- * IO space mapping must be initialized before we can do that.
- */
- omap_check_revision();
-
-#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
- if (cpu_is_omap7xx()) {
- iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- if (cpu_is_omap15xx()) {
- iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
- if (cpu_is_omap16xx()) {
- iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
- }
-#endif
-
- omap_sram_init();
- omap_init_consistent_dma_size();
}
-/*
- * Common low-level hardware init for omap1. This should only get called from
- * board specific init.
- */
-void __init omap1_init_common_hw(void)
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+void __init omap7xx_map_io(void)
{
+ omap1_map_common_io();
+ iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void __init omap15xx_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+void __init omap16xx_map_io(void)
+{
+ omap1_map_common_io();
+ iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
+}
+#endif
+
+/*
+ * Common low-level hardware init for omap1.
+ */
+void omap1_init_early(void)
+{
+ omap_check_revision();
+ omap_ioremap_init();
+
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
*/
@@ -139,8 +132,8 @@
/* Must init clocks early to assure that timer interrupt works
*/
omap1_clk_init();
-
omap1_mux_init();
+ omap_init_consistent_dma_size();
}
/*
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index ab7395d..91f9abb 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -31,6 +31,7 @@
static int dsp_use;
static struct clk *api_clk;
static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
static void omap1_mcbsp_request(unsigned int id)
{
@@ -78,6 +79,17 @@
.free = omap1_mcbsp_free,
};
+#define OMAP7XX_MCBSP1_BASE 0xfffb1000
+#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE 0xe1011800
+#define OMAP1510_MCBSP2_BASE 0xfffb1000
+#define OMAP1510_MCBSP3_BASE 0xe1017000
+
+#define OMAP1610_MCBSP1_BASE 0xe1011800
+#define OMAP1610_MCBSP2_BASE 0xfffb1000
+#define OMAP1610_MCBSP3_BASE 0xe1017000
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
struct resource omap7xx_mcbsp_res[][6] = {
{
@@ -369,6 +381,39 @@
#define OMAP16XX_MCBSP_COUNT 0
#endif
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+ struct omap_mcbsp_platform_data *config, int size)
+{
+ int i;
+
+ omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+ GFP_KERNEL);
+ if (!omap_mcbsp_devices) {
+ printk(KERN_ERR "Could not register McBSP devices\n");
+ return;
+ }
+
+ for (i = 0; i < size; i++) {
+ struct platform_device *new_mcbsp;
+ int ret;
+
+ new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+ if (!new_mcbsp)
+ continue;
+ platform_device_add_resources(new_mcbsp, &res[i * res_count],
+ res_count);
+ config[i].reg_size = 2;
+ config[i].reg_step = 2;
+ new_mcbsp->dev.platform_data = &config[i];
+ ret = platform_device_add(new_mcbsp);
+ if (ret) {
+ platform_device_put(new_mcbsp);
+ continue;
+ }
+ omap_mcbsp_devices[i] = new_mcbsp;
+ }
+}
+
static int __init omap1_mcbsp_init(void)
{
if (!cpu_class_is_omap1())
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
new file mode 100644
index 0000000..6e90665
--- /dev/null
+++ b/arch/arm/mach-omap1/timer.c
@@ -0,0 +1,173 @@
+/**
+ * OMAP1 Dual-Mode Timers - platform device registration
+ *
+ * Contains first level initialization routines which internally
+ * generates timer device information and registers with linux
+ * device model. It also has low level function to chnage the timer
+ * input clock source.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+
+#include <plat/dmtimer.h>
+
+#define OMAP1610_GPTIMER1_BASE 0xfffb1400
+#define OMAP1610_GPTIMER2_BASE 0xfffb1c00
+#define OMAP1610_GPTIMER3_BASE 0xfffb2400
+#define OMAP1610_GPTIMER4_BASE 0xfffb2c00
+#define OMAP1610_GPTIMER5_BASE 0xfffb3400
+#define OMAP1610_GPTIMER6_BASE 0xfffb3c00
+#define OMAP1610_GPTIMER7_BASE 0xfffb7400
+#define OMAP1610_GPTIMER8_BASE 0xfffbd400
+
+#define OMAP1_DM_TIMER_COUNT 8
+
+static int omap1_dm_timer_set_src(struct platform_device *pdev,
+ int source)
+{
+ int n = (pdev->id - 1) << 1;
+ u32 l;
+
+ l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+ l |= source << n;
+ __raw_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
+}
+
+
+int __init omap1_dm_timer_init(void)
+{
+ int i;
+ int ret;
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+
+ if (!cpu_is_omap16xx())
+ return 0;
+
+ for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
+ struct resource res[2];
+ u32 base, irq;
+
+ switch (i) {
+ case 1:
+ base = OMAP1610_GPTIMER1_BASE;
+ irq = INT_1610_GPTIMER1;
+ break;
+ case 2:
+ base = OMAP1610_GPTIMER2_BASE;
+ irq = INT_1610_GPTIMER2;
+ break;
+ case 3:
+ base = OMAP1610_GPTIMER3_BASE;
+ irq = INT_1610_GPTIMER3;
+ break;
+ case 4:
+ base = OMAP1610_GPTIMER4_BASE;
+ irq = INT_1610_GPTIMER4;
+ break;
+ case 5:
+ base = OMAP1610_GPTIMER5_BASE;
+ irq = INT_1610_GPTIMER5;
+ break;
+ case 6:
+ base = OMAP1610_GPTIMER6_BASE;
+ irq = INT_1610_GPTIMER6;
+ break;
+ case 7:
+ base = OMAP1610_GPTIMER7_BASE;
+ irq = INT_1610_GPTIMER7;
+ break;
+ case 8:
+ base = OMAP1610_GPTIMER8_BASE;
+ irq = INT_1610_GPTIMER8;
+ break;
+ default:
+ /*
+ * not supposed to reach here.
+ * this is to remove warning.
+ */
+ return -EINVAL;
+ }
+
+ pdev = platform_device_alloc("omap_timer", i);
+ if (!pdev) {
+ pr_err("%s: Failed to device alloc for dmtimer%d\n",
+ __func__, i);
+ return -ENOMEM;
+ }
+
+ memset(res, 0, 2 * sizeof(struct resource));
+ res[0].start = base;
+ res[0].end = base + 0x46;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = irq;
+ res[1].end = irq;
+ res[1].flags = IORESOURCE_IRQ;
+ ret = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add resources.\n",
+ __func__);
+ goto err_free_pdev;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_pdata;
+ }
+
+ pdata->set_timer_src = omap1_dm_timer_set_src;
+ pdata->needs_manual_reset = 1;
+
+ ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ ret = platform_device_add(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
+ __func__);
+ goto err_free_pdata;
+ }
+
+ dev_dbg(&pdev->dev, " Registered.\n");
+ }
+
+ return 0;
+
+err_free_pdata:
+ kfree(pdata);
+
+err_free_pdev:
+ platform_device_unregister(pdev);
+
+ return ret;
+}
+arch_initcall(omap1_dm_timer_init);
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 89bfb49..5034147 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -14,7 +14,6 @@
select SERIAL_OMAP_CONSOLE
select I2C
select I2C_OMAP
- select MFD_SUPPORT
select MENELAUS if ARCH_OMAP2
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
@@ -108,9 +107,13 @@
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
- bool "Generic OMAP board"
- depends on ARCH_OMAP2
+ bool "Generic OMAP2+ board"
+ depends on ARCH_OMAP2PLUS
+ select USE_OF
default y
+ help
+ Support for generic TI OMAP2+ boards using Flattened Device Tree.
+ More information at Documentation/devicetree
config MACH_OMAP2_TUSB6010
bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 7317a2b..69ab1c0 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -89,14 +89,13 @@
vp44xx_data.o
# OMAP voltage domains
-ifeq ($(CONFIG_PM),y)
-voltagedomain-common := voltage.o
-obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common)
+voltagedomain-common := voltage.o vc.o vp.o
+obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
+ voltagedomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
voltagedomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \
voltagedomains44xx_data.o
-endif
# OMAP powerdomain framework
powerdomain-common += powerdomain.o powerdomain-common.o
@@ -116,9 +115,12 @@
obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
clockdomain2xxx_3xxx.o \
clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_SOC_OMAP2420) += clockdomains2420_data.o
+obj-$(CONFIG_SOC_OMAP2430) += clockdomains2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
clockdomain2xxx_3xxx.o \
- clockdomains2xxx_3xxx_data.o
+ clockdomains2xxx_3xxx_data.o \
+ clockdomains3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
clockdomain44xx.o \
clockdomains44xx_data.o
@@ -185,75 +187,62 @@
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
-obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
- hsmmc.o
+obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
-obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
- hsmmc.o
-obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OVERO) += board-overo.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
- hsmmc.o \
- board-flash.o
+obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o
+obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o
+obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o
+obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
+obj-$(CONFIG_MACH_ENCORE) += board-omap3encore.o
+obj-$(CONFIG_MACH_OVERO) += board-overo.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
+obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
- sdram-nokia.o \
- hsmmc.o
+ sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
sdram-nokia.o \
board-rx51-peripherals.o \
- board-rx51-video.o \
- hsmmc.o
+ board-rx51-video.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \
board-zoom-display.o \
- board-flash.o \
- hsmmc.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
- board-zoom-display.o \
- board-flash.o \
- hsmmc.o
-obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
- hsmmc.o
+ board-zoom-display.o
+obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
-obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
- hsmmc.o
-obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
- hsmmc.o
+obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
+obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
+
+obj-$(CONFIG_MACH_PCM049) += board-omap4pcm049.o
obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
-obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
- hsmmc.o
+obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+
# Platform specific device init code
+
+omap-flash-$(CONFIG_MTD_NAND_OMAP2) := board-flash.o
+omap-flash-$(CONFIG_MTD_ONENAND_OMAP2) := board-flash.o
+obj-y += $(omap-flash-y) $(omap-flash-m)
+
+omap-hsmmc-$(CONFIG_MMC_OMAP_HS) := hsmmc.o
+obj-y += $(omap-hsmmc-m) $(omap-hsmmc-y)
+
+
usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
obj-y += $(usbfs-m) $(usbfs-y)
obj-y += usb-musb.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index f8ce84b..d704f0a 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -192,12 +192,6 @@
#endif
-static void __init omap_2430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -284,6 +278,7 @@
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap2_hsmmc_init(mmc);
omap2_usbfs_init(&sdp2430_usb_config);
@@ -299,18 +294,12 @@
sdp2430_display_init();
}
-static void __init omap_2430sdp_map_io(void)
-{
- omap2_set_globals_243x();
- omap243x_map_common_io();
-}
-
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_2430sdp_map_io,
- .init_early = omap_2430sdp_init_early,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 204bedd..77142c1 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -224,12 +224,6 @@
static struct omap_board_config_kernel sdp3430_config[] __initdata = {
};
-static void __init omap_3430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-}
-
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -718,6 +712,7 @@
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
omap_ads7846_init(1, gpio_pendown, 310, NULL);
board_serial_init();
+ omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
usb_musb_init(NULL);
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
@@ -731,7 +726,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_3430sdp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 8b5b5aa..f552305 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -70,13 +70,6 @@
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
-static void __init omap_sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -207,6 +200,8 @@
omap_board_config = sdp_config;
omap_board_config_size = ARRAY_SIZE(sdp_config);
zoom_peripherals_init();
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
zoom_display_init();
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
@@ -218,7 +213,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_sdp_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 484cec5..5156468 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -133,7 +133,7 @@
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
-static struct omap_device_pad keypad_pads[] __initdata = {
+static struct omap_device_pad keypad_pads[] = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
@@ -379,12 +379,6 @@
&sdp4430_vbat,
};
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
@@ -961,6 +955,7 @@
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
@@ -982,18 +977,12 @@
omap_4430sdp_display_init();
}
-static void __init omap_4430sdp_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_4430sdp_map_io,
- .init_early = omap_4430sdp_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index db110fd..7834536 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,12 +47,6 @@
};
#endif
-static void __init am3517_crane_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -70,6 +64,7 @@
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = am3517_crane_config;
omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
@@ -101,7 +96,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_crane_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index ab10f75..d314f03 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -362,11 +362,6 @@
/*
* Board initialization
*/
-static void __init am3517_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_ULPI,
@@ -469,6 +464,7 @@
am3517_evm_i2c_init();
omap_display_init(&am3517_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
@@ -493,7 +489,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = am3517_evm_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index ad55351..de8134b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -284,12 +284,6 @@
.default_device = &apollon_lcd_device,
};
-static void __init omap_apollon_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct gpio apollon_gpio_leds[] __initdata = {
{ LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */
{ LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */
@@ -349,22 +343,16 @@
*/
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
-
+ omap_sdrc_init(NULL, NULL);
omap_display_init(&apollon_dss_data);
}
-static void __init omap_apollon_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_apollon_map_io,
- .init_early = omap_apollon_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 6e0f0d2..bd1bcac 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -471,13 +471,6 @@
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
-static void __init cm_t35_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* nCS and IRQ for CM-T35 ethernet */
@@ -610,6 +603,8 @@
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
cm_t35_init_i2c();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
@@ -637,7 +632,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
@@ -647,7 +642,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t35_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index aed9c29..3f4dc66 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -251,12 +251,6 @@
static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
};
-static void __init cm_t3517_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
@@ -289,6 +283,7 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = cm_t3517_config;
omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
cm_t3517_init_leds();
@@ -302,7 +297,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = cm_t3517_init_early,
+ .init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index d9bfe54..4291894 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -397,19 +397,6 @@
},
};
-
-static void __init devkit8000_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init devkit8000_init_irq(void)
-{
- omap3_init_irq();
-}
-
#define OMAP_DM9000_BASE 0x2c000000
static struct resource omap_dm9000_resources[] = {
@@ -645,6 +632,8 @@
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_dm9000_init();
@@ -670,8 +659,8 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = devkit8000_init_early,
- .init_irq = devkit8000_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index aa1b0cb..30a6f52 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -148,11 +148,6 @@
board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
gpmc_nand_init(&board_nand_data);
}
-#else
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, int nand_type)
-{
-}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
/**
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
index c240a3f..d25503a 100644
--- a/arch/arm/mach-omap2/board-flash.h
+++ b/arch/arm/mach-omap2/board-flash.h
@@ -24,7 +24,26 @@
int nr_parts;
};
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
extern void board_flash_init(struct flash_partitions [],
char chip_sel[][GPMC_CS_NUM], int nand_type);
+#else
+static inline void board_flash_init(struct flash_partitions part[],
+ char chip_sel[][GPMC_CS_NUM], int nand_type)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || \
+ defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type);
+#else
+static inline void board_nand_init(struct mtd_partition *nand_parts,
+ u8 nr_parts, u8 cs, int nand_type)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 4431ad3..0cc9094 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -1,75 +1,157 @@
/*
- * linux/arch/arm/mach-omap2/board-generic.c
- *
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
- * Modified from mach-omap/omap1/board-generic.c
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
- * Code for generic OMAP2 board. Should work on many OMAP2 systems where
- * the bootloader passes the board-specific data to the kernel.
- * Do not put any board specific code to this file; create a new machine
- * type if you need custom low-level initializations.
+ * Modified from the original mach-omap/omap2/board-generic.c did by Paul
+ * to support the OMAP2+ device tree boards with an unique board file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/irqdomain.h>
+#include <linux/i2c/twl.h>
#include <mach/hardware.h>
-#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/omap4-common.h>
+#include "common-board-devices.h"
-static struct omap_board_config_kernel generic_config[] = {
+/*
+ * XXX: Still needed to boot until the i2c & twl driver is adapted to
+ * device-tree
+ */
+static struct twl4030_platform_data sdp4430_twldata = {
+ .irq_base = TWL6030_IRQ_BASE,
+ .irq_end = TWL6030_IRQ_END,
};
-static void __init omap_generic_init_early(void)
+static void __init omap4_i2c_init(void)
{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
+ omap4_pmic_init("twl6030", &sdp4430_twldata);
}
+static struct twl4030_platform_data beagle_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+};
+
+static void __init omap3_i2c_init(void)
+{
+ omap3_pmic_init("twl4030", &beagle_twldata);
+}
+
+static struct of_device_id omap_dt_match_table[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "ti,omap-infra", },
+ { }
+};
+
+static struct of_device_id intc_match[] __initdata = {
+ { .compatible = "ti,omap3-intc", },
+ { .compatible = "arm,cortex-a9-gic", },
+ { }
+};
+
static void __init omap_generic_init(void)
{
+ struct device_node *node = of_find_matching_node(NULL, intc_match);
+ if (node)
+ irq_domain_add_simple(node, 0);
+
omap_serial_init();
- omap_board_config = generic_config;
- omap_board_config_size = ARRAY_SIZE(generic_config);
+ omap_sdrc_init(NULL, NULL);
+
+ of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
}
-static void __init omap_generic_map_io(void)
+static void __init omap4_init(void)
{
- if (cpu_is_omap242x()) {
- omap2_set_globals_242x();
- omap242x_map_common_io();
- } else if (cpu_is_omap243x()) {
- omap2_set_globals_243x();
- omap243x_map_common_io();
- } else if (cpu_is_omap34xx()) {
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
- } else if (cpu_is_omap44xx()) {
- omap2_set_globals_443x();
- omap44xx_map_common_io();
- }
+ omap4_i2c_init();
+ omap_generic_init();
}
-/* XXX This machine entry name should be updated */
-MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
- /* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
+static void __init omap3_init(void)
+{
+ omap3_i2c_init();
+ omap_generic_init();
+}
+
+#if defined(CONFIG_SOC_OMAP2420)
+static const char *omap242x_boards_compat[] __initdata = {
+ "ti,omap2420",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_generic_map_io,
- .init_early = omap_generic_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
+ .dt_compat = omap242x_boards_compat,
MACHINE_END
+#endif
+
+#if defined(CONFIG_SOC_OMAP2430)
+static const char *omap243x_boards_compat[] __initdata = {
+ "ti,omap2430",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap243x_map_io,
+ .init_early = omap2430_init_early,
+ .init_irq = omap2_init_irq,
+ .init_machine = omap_generic_init,
+ .timer = &omap2_timer,
+ .dt_compat = omap243x_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+static const char *omap3_boards_compat[] __initdata = {
+ "ti,omap3",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = omap3_init,
+ .timer = &omap3_timer,
+ .dt_compat = omap3_boards_compat,
+MACHINE_END
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static const char *omap4_boards_compat[] __initdata = {
+ "ti,omap4",
+ NULL,
+};
+
+DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
+ .init_irq = gic_init_irq,
+ .init_machine = omap4_init,
+ .timer = &omap4_timer,
+ .dt_compat = omap4_boards_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 8fcf796..c12666e 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -300,17 +300,6 @@
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
-static void __init omap_h4_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
-static void __init omap_h4_init_irq(void)
-{
- omap2_init_irq();
-}
-
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
@@ -378,24 +367,19 @@
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
omap2_usbfs_init(&h4_usb_config);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
h4_init_flash();
omap_display_init(&h4_dss_data);
}
-static void __init omap_h4_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_h4_map_io,
- .init_early = omap_h4_init_early,
- .init_irq = omap_h4_init_irq,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
+ .init_irq = omap2_init_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 96f9ef3..d0a3f78 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -491,13 +491,6 @@
&igep_vwlan_device,
};
-static void __init igep_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(m65kxxxxam_sdrc_params,
- m65kxxxxam_sdrc_params);
-}
-
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
@@ -650,6 +643,8 @@
igep_i2c_init();
platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));
omap_serial_init();
+ omap_sdrc_init(m65kxxxxam_sdrc_params,
+ m65kxxxxam_sdrc_params);
usb_musb_init(NULL);
igep_flash_init();
@@ -675,7 +670,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
@@ -685,7 +680,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = igep_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f8f8a68..e179da0 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -251,12 +251,6 @@
omap_display_init(&ldp_dss_data);
}
-static void __init omap_ldp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
{
int r;
@@ -425,6 +419,7 @@
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_ads7846_init(1, 54, 310, NULL);
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
@@ -437,7 +432,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_ldp_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 6ce7481..e9d5f4a 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -616,18 +616,6 @@
},
};
-static void __init n8x0_map_io(void)
-{
- omap2_set_globals_242x();
- omap242x_map_common_io();
-}
-
-static void __init n8x0_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* I2S codec port pins for McBSP block */
@@ -689,6 +677,7 @@
i2c_register_board_info(2, n810_i2c_board_info_2,
ARRAY_SIZE(n810_i2c_board_info_2));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
gpmc_onenand_init(board_onenand_data);
n8x0_mmc_init();
n8x0_usb_init();
@@ -697,8 +686,8 @@
MACHINE_START(NOKIA_N800, "Nokia N800")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
@@ -707,8 +696,8 @@
MACHINE_START(NOKIA_N810, "Nokia N810")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
@@ -717,8 +706,8 @@
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = n8x0_map_io,
- .init_early = n8x0_init_early,
+ .map_io = omap242x_map_io,
+ .init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 928933b..4a71cb7 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -378,7 +378,8 @@
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
beagle_twldata.vpll2->constraints.name = "VDVI";
@@ -444,21 +445,15 @@
},
};
-static void __init omap3_beagle_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_beagle_init_irq(void)
-{
- omap3_init_irq();
-}
+static struct platform_device madc_hwmon = {
+ .name = "twl4030_madc_hwmon",
+ .id = -1,
+};
static struct platform_device *omap3_beagle_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
+ &madc_hwmon,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
@@ -493,8 +488,8 @@
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap2_get_mpuss_device();
- iva_dev = omap2_get_iva_device();
+ mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ iva_dev = omap_device_get_by_hwmod_name("iva");
if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
@@ -534,6 +529,8 @@
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -560,8 +557,8 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_beagle_init_early,
- .init_irq = omap3_beagle_init_irq,
+ .init_early = omap3_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 0d5a9e4..2d24e28 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -519,12 +519,6 @@
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
};
-static void __init omap3_evm_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
static struct usbhs_omap_board_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -639,6 +633,7 @@
omap_display_init(&omap3_evm_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
@@ -683,7 +678,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_evm_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 01354a2..7c0f193 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -182,12 +182,6 @@
gpmc_smsc911x_init(&board_smsc911x_data);
}
-static void __init omap3logic_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -200,6 +194,7 @@
omap3torpedo_fix_pbias_voltage();
omap3logic_i2c_init();
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
board_mmc_init();
board_smsc911x_init();
@@ -211,7 +206,7 @@
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
@@ -220,7 +215,7 @@
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3logic_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index cca523e..f7811f4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -525,13 +525,6 @@
}
};
-static void __init omap3pandora_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static void __init pandora_wl1251_init(void)
{
struct wl12xx_platform_data pandora_wl1251_pdata;
@@ -593,6 +586,8 @@
ARRAY_SIZE(omap3pandora_devices));
omap_display_init(&pandora_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
@@ -609,7 +604,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3pandora_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 4732589..ddb7d66 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -394,17 +394,6 @@
static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
};
-static void __init omap3_stalker_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-}
-
-static void __init omap3_stalker_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
@@ -444,6 +433,7 @@
omap_display_init(&omap3_stalker_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
@@ -462,8 +452,8 @@
/* Maintainer: Jason Lam -lzg@ema-tech.com */
.atag_offset = 0x100,
.map_io = omap3_map_io,
- .init_early = omap3_stalker_init_early,
- .init_irq = omap3_stalker_init_irq,
+ .init_early = omap35xx_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index abb6891..a2d0d19 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -311,18 +311,6 @@
};
#endif
-static void __init omap3_touchbook_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
-static void __init omap3_touchbook_init_irq(void)
-{
- omap3_init_irq();
-}
-
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
@@ -367,6 +355,8 @@
platform_add_devices(omap3_touchbook_devices,
ARRAY_SIZE(omap3_touchbook_devices));
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
@@ -389,8 +379,8 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap3_touchbook_init_early,
- .init_irq = omap3_touchbook_init_irq,
+ .init_early = omap3430_init_early,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index ed38d8f..a8c2c42 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -95,12 +95,6 @@
&wl1271_device,
};
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
@@ -569,24 +563,19 @@
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
-static void __init omap4_panda_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index ec0f60c..4cf7aea 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -479,13 +479,6 @@
return 0;
}
-static void __init overo_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
@@ -515,6 +508,8 @@
overo_i2c_init();
omap_display_init(&overo_dss_data);
omap_serial_init();
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_nand_flash_init(0, overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions));
usb_musb_init(NULL);
@@ -565,7 +560,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = overo_init_early,
+ .init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 9a8ce23..616fb39 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -123,15 +123,6 @@
omap2_hsmmc_init(mmc);
}
-static void __init rm680_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
@@ -140,23 +131,23 @@
static void __init rm680_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(NULL);
rm680_peripherals_init();
}
-static void __init rm680_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = rm680_map_io,
- .init_early = rm680_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index faa2a8e..4af7c4b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -79,15 +79,6 @@
{7505 + 15274, 484329, 1},
};
-static void __init rx51_init_early(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap2_init_common_infrastructure();
- sdrc_params = nokia_get_sdram_timings();
- omap2_init_common_devices(sdrc_params, sdrc_params);
-}
-
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
@@ -104,9 +95,15 @@
static void __init rx51_init(void)
{
+ struct omap_sdrc_params *sdrc_params;
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
omap_serial_init();
+
+ sdrc_params = nokia_get_sdram_timings();
+ omap_sdrc_init(sdrc_params, sdrc_params);
+
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
@@ -117,12 +114,6 @@
platform_device_register(&leds_gpio);
}
-static void __init rx51_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static void __init rx51_reserve(void)
{
rx51_video_mem_init();
@@ -133,8 +124,8 @@
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
.atag_offset = 0x100,
.reserve = rx51_reserve,
- .map_io = rx51_map_io,
- .init_early = rx51_init_early,
+ .map_io = omap3_map_io,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index e41958a..e6ee884 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -27,22 +27,16 @@
static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
};
-static void __init ti8168_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static void __init ti8168_evm_init(void)
{
omap_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap_board_config = ti8168_evm_config;
omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
}
static void __init ti8168_evm_map_io(void)
{
- omap2_set_globals_ti816x();
omapti816x_map_common_io();
}
@@ -50,7 +44,7 @@
/* Maintainer: Texas Instruments */
.atag_offset = 0x100,
.map_io = ti8168_evm_map_io,
- .init_early = ti8168_init_early,
+ .init_early = ti816x_init_early,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 72f1db4..be6684d 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -34,17 +34,6 @@
#define ZOOM3_EHCI_RESET_GPIO 64
-static void __init omap_zoom_init_early(void)
-{
- omap2_init_common_infrastructure();
- if (machine_is_omap_zoom2())
- omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
- mt46h32m32lf6_sdrc_params);
- else if (machine_is_omap_zoom3())
- omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
- h8mbx00u0mer0em_sdrc_params);
-}
-
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
@@ -129,6 +118,14 @@
ZOOM_NAND_CS, NAND_BUSWIDTH_16);
zoom_debugboard_init();
zoom_peripherals_init();
+
+ if (machine_is_omap_zoom2())
+ omap_sdrc_init(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ else if (machine_is_omap_zoom3())
+ omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
+ h8mbx00u0mer0em_sdrc_params);
+
zoom_display_init();
}
@@ -136,7 +133,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
@@ -146,7 +143,7 @@
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
- .init_early = omap_zoom_init_early,
+ .init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index debc040..14a6277 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -1898,6 +1898,54 @@
CLK(NULL, "pka_ick", &pka_ick, CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_242X),
CLK("musb-hdrc", "fck", &osc_ck, CK_242X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index 96a942e..ea6717c 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -1998,6 +1998,54 @@
CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X),
CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X),
CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X),
+ CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.4", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.5", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.6", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.7", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.8", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.9", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.10", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.11", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.12", "32k_ck", &func_32k_ck, CK_243X),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_243X),
+ CLK("omap_timer.1", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.2", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.3", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.4", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.5", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.6", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.7", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.8", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.9", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.10", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.11", "alt_ck", &alt_ck, CK_243X),
+ CLK("omap_timer.12", "alt_ck", &alt_ck, CK_243X),
};
/*
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index b9b8446..65dd363 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3464,6 +3464,42 @@
CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX),
CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX),
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
+ CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX),
+ CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX),
+ CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX),
+ CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX),
+ CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX),
+ CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX),
+ CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX),
+ CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX),
+ CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX),
+ CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX),
+ CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX),
+ CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX),
+ CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.4", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.5", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.6", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.7", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.8", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.9", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.10", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.11", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.12", "32k_ck", &omap_32k_fck, CK_3XXX),
+ CLK("omap_timer.1", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.2", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.3", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.4", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.5", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.6", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.7", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.8", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.9", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.10", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.11", "sys_ck", &sys_ck, CK_3XXX),
+ CLK("omap_timer.12", "sys_ck", &sys_ck, CK_3XXX),
};
@@ -3472,7 +3508,16 @@
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ /*
+ * 3505 must be tested before 3517, since 3517 returns true
+ * for both AM3517 chips and AM3517 family chips, which
+ * includes 3505. Unfortunately there's no obvious family
+ * test for 3517/3505 :-(
+ */
+ if (cpu_is_omap3505()) {
+ cpu_mask = RATE_IN_34XX;
+ cpu_clkflg = CK_3505;
+ } else if (cpu_is_omap3517()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_3517;
} else if (cpu_is_omap3505()) {
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index c0b6fbd..946bf04 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3363,6 +3363,39 @@
CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
+ CLK("omap_timer.1", "fck", &timer1_fck, CK_443X),
+ CLK("omap_timer.2", "fck", &timer2_fck, CK_443X),
+ CLK("omap_timer.3", "fck", &timer3_fck, CK_443X),
+ CLK("omap_timer.4", "fck", &timer4_fck, CK_443X),
+ CLK("omap_timer.5", "fck", &timer5_fck, CK_443X),
+ CLK("omap_timer.6", "fck", &timer6_fck, CK_443X),
+ CLK("omap_timer.7", "fck", &timer7_fck, CK_443X),
+ CLK("omap_timer.8", "fck", &timer8_fck, CK_443X),
+ CLK("omap_timer.9", "fck", &timer9_fck, CK_443X),
+ CLK("omap_timer.10", "fck", &timer10_fck, CK_443X),
+ CLK("omap_timer.11", "fck", &timer11_fck, CK_443X),
+ CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.4", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.5", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.6", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.7", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.8", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.9", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.10", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.11", "32k_ck", &sys_32k_ck, CK_443X),
+ CLK("omap_timer.1", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.2", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.3", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.4", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.9", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.10", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.11", "sys_ck", &sys_clkin_ck, CK_443X),
+ CLK("omap_timer.5", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.6", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.7", "sys_ck", &syc_clk_div_ck, CK_443X),
+ CLK("omap_timer.8", "sys_ck", &syc_clk_div_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 8f08906..8480ee4 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -73,9 +73,6 @@
if (!clkdm || !clkdm->name)
return -EINVAL;
- if (!omap_chip_is(clkdm->omap_chip))
- return -EINVAL;
-
pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
if (!pwrdm) {
pr_err("clockdomain: %s: powerdomain %s does not exist\n",
@@ -105,13 +102,10 @@
{
struct clkdm_dep *cd;
- if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
+ if (!clkdm || !deps)
return ERR_PTR(-EINVAL);
for (cd = deps; cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
-
if (!cd->clkdm && cd->clkdm_name)
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -148,9 +142,6 @@
if (!autodep)
return;
- if (!omap_chip_is(autodep->omap_chip))
- return;
-
clkdm = clkdm_lookup(autodep->clkdm.name);
if (!clkdm) {
pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
@@ -182,9 +173,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -216,9 +204,6 @@
if (IS_ERR(autodep->clkdm.ptr))
continue;
- if (!omap_chip_is(autodep->omap_chip))
- continue;
-
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
"clkdm %s\n", autodep->clkdm.ptr->name,
clkdm->name);
@@ -243,8 +228,6 @@
struct clkdm_dep *cd;
for (cd = clkdm_deps; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (cd->clkdm)
continue;
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
@@ -257,43 +240,113 @@
/* Public functions */
/**
- * clkdm_init - set up the clockdomain layer
- * @clkdms: optional pointer to an array of clockdomains to register
- * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specific implementations
+ * clkdm_register_platform_funcs - register clockdomain implementation fns
+ * @co: func pointers for arch specific implementations
*
- * Set up internal state. If a pointer to an array of clockdomains
- * @clkdms was supplied, loop through the list of clockdomains,
- * register all that are available on the current platform. Similarly,
- * if a pointer to an array of clockdomain autodependencies
- * @init_autodeps was provided, register those. No return value.
+ * Register the list of function pointers used to implement the
+ * clockdomain functions on different OMAP SoCs. Should be called
+ * before any other clkdm_register*() function. Returns -EINVAL if
+ * @co is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void clkdm_init(struct clockdomain **clkdms,
- struct clkdm_autodep *init_autodeps,
- struct clkdm_ops *custom_funcs)
+int clkdm_register_platform_funcs(struct clkdm_ops *co)
+{
+ if (!co)
+ return -EINVAL;
+
+ if (arch_clkdm)
+ return -EEXIST;
+
+ arch_clkdm = co;
+
+ return 0;
+};
+
+/**
+ * clkdm_register_clkdms - register SoC clockdomains
+ * @cs: pointer to an array of struct clockdomain to register
+ *
+ * Register the clockdomains available on a particular OMAP SoC. Must
+ * be called after clkdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * clkdm_register_platform_funcs(); -EINVAL if the argument @cs is
+ * null; or 0 upon success.
+ */
+int clkdm_register_clkdms(struct clockdomain **cs)
{
struct clockdomain **c = NULL;
- struct clockdomain *clkdm;
- struct clkdm_autodep *autodep = NULL;
- if (!custom_funcs)
- WARN(1, "No custom clkdm functions registered\n");
- else
- arch_clkdm = custom_funcs;
+ if (!arch_clkdm)
+ return -EACCES;
- if (clkdms)
- for (c = clkdms; *c; c++)
- _clkdm_register(*c);
+ if (!cs)
+ return -EINVAL;
- autodeps = init_autodeps;
+ for (c = cs; *c; c++)
+ _clkdm_register(*c);
+
+ return 0;
+}
+
+/**
+ * clkdm_register_autodeps - register autodeps (if required)
+ * @ia: pointer to a static array of struct clkdm_autodep to register
+ *
+ * Register clockdomain "automatic dependencies." These are
+ * clockdomain wakeup and sleep dependencies that are automatically
+ * added whenever the first clock inside a clockdomain is enabled, and
+ * removed whenever the last clock inside a clockdomain is disabled.
+ * These are currently only used on OMAP3 devices, and are deprecated,
+ * since they waste energy. However, until the OMAP2/3 IP block
+ * enable/disable sequence can be converted to match the OMAP4
+ * sequence, they are needed.
+ *
+ * Must be called only after all of the SoC clockdomains are
+ * registered, since the function will resolve autodep clockdomain
+ * names into clockdomain pointers.
+ *
+ * The struct clkdm_autodep @ia array must be static, as this function
+ * does not copy the array elements.
+ *
+ * Returns -EACCES if called before any clockdomains have been
+ * registered, -EINVAL if called with a null @ia argument, -EEXIST if
+ * autodeps have already been registered, or 0 upon success.
+ */
+int clkdm_register_autodeps(struct clkdm_autodep *ia)
+{
+ struct clkdm_autodep *a = NULL;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
+ if (!ia)
+ return -EINVAL;
+
if (autodeps)
- for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
- _autodep_lookup(autodep);
+ return -EEXIST;
- /*
- * Put all clockdomains into software-supervised mode; PM code
- * should later enable hardware-supervised mode as appropriate
- */
+ autodeps = ia;
+ for (a = autodeps; a->clkdm.ptr; a++)
+ _autodep_lookup(a);
+
+ return 0;
+}
+
+/**
+ * clkdm_complete_init - set up the clockdomain layer
+ *
+ * Put all clockdomains into software-supervised mode; PM code should
+ * later enable hardware-supervised mode as appropriate. Must be
+ * called after clkdm_register_clkdms(). Returns -EACCES if called
+ * before clkdm_register_clkdms(), or 0 upon success.
+ */
+int clkdm_complete_init(void)
+{
+ struct clockdomain *clkdm;
+
+ if (list_empty(&clkdm_list))
+ return -EACCES;
+
list_for_each_entry(clkdm, &clkdm_list, node) {
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
clkdm_wakeup(clkdm);
@@ -306,6 +359,8 @@
_resolve_clkdm_deps(clkdm, clkdm->sleepdep_srcs);
clkdm_clear_all_sleepdeps(clkdm);
}
+
+ return 0;
}
/**
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 1e50c88..f7b5860 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -45,7 +45,6 @@
/**
* struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
* @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
*
* A clockdomain that should have wkdeps and sleepdeps added when a
* clockdomain should stay active in hwsup mode; and conversely,
@@ -60,14 +59,12 @@
const char *name;
struct clockdomain *ptr;
} clkdm;
- const struct omap_chip_id omap_chip;
};
/**
* struct clkdm_dep - encode dependencies between clockdomains
* @clkdm_name: clockdomain name
* @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
* @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
* @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
*
@@ -81,7 +78,6 @@
struct clockdomain *clkdm;
atomic_t wkdep_usecount;
atomic_t sleepdep_usecount;
- const struct omap_chip_id omap_chip;
};
/* Possible flags for struct clockdomain._flags */
@@ -101,7 +97,6 @@
* @clkdm_offs: (OMAP4 only) CM clockdomain register offset
* @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
* @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
* @usecount: Usecount tracking
* @node: list_head to link all clockdomains together
*
@@ -126,7 +121,6 @@
const u16 clkdm_offs;
struct clkdm_dep *wkdep_srcs;
struct clkdm_dep *sleepdep_srcs;
- const struct omap_chip_id omap_chip;
atomic_t usecount;
struct list_head node;
spinlock_t lock;
@@ -166,8 +160,11 @@
int (*clkdm_clk_disable)(struct clockdomain *clkdm);
};
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps,
- struct clkdm_ops *custom_funcs);
+int clkdm_register_platform_funcs(struct clkdm_ops *co);
+int clkdm_register_autodeps(struct clkdm_autodep *ia);
+int clkdm_register_clkdms(struct clockdomain **c);
+int clkdm_complete_init(void);
+
struct clockdomain *clkdm_lookup(const char *name);
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
@@ -195,7 +192,8 @@
int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh);
int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh);
-extern void __init omap2xxx_clockdomains_init(void);
+extern void __init omap242x_clockdomains_init(void);
+extern void __init omap243x_clockdomains_init(void);
extern void __init omap3xxx_clockdomains_init(void);
extern void __init omap44xx_clockdomains_init(void);
extern void _clkdm_add_autodeps(struct clockdomain *clkdm);
@@ -205,4 +203,10 @@
extern struct clkdm_ops omap3_clkdm_operations;
extern struct clkdm_ops omap4_clkdm_operations;
+extern struct clkdm_dep gfx_24xx_wkdeps[];
+extern struct clkdm_dep dsp_24xx_wkdeps[];
+extern struct clockdomain wkup_common_clkdm;
+extern struct clockdomain prm_common_clkdm;
+extern struct clockdomain cm_common_clkdm;
+
#endif
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index f740edb..a0d68db 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
@@ -98,8 +96,6 @@
u32 mask = 0;
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index b43706a..935c7f0 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -52,8 +52,6 @@
u32 mask = 0;
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
- if (!omap_chip_is(cd->omap_chip))
- continue;
if (!cd->clkdm)
continue; /* only happens if data is erroneous */
diff --git a/arch/arm/mach-omap2/clockdomains2420_data.c b/arch/arm/mach-omap2/clockdomains2420_data.c
new file mode 100644
index 0000000..0ab8e46
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2420_data.c
@@ -0,0 +1,154 @@
+/*
+ * OMAP2420 clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2420 chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2420-specific possible wakeup dependencies */
+
+/* 2420 PM_WKDEP_MPU: CORE, DSP, WKUP */
+static struct clkdm_dep mpu_2420_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP */
+static struct clkdm_dep core_2420_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2420-only clockdomains
+ */
+
+static struct clockdomain mpu_2420_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = mpu_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+static struct clockdomain iva1_2420_clkdm = {
+ .name = "iva1_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
+};
+
+static struct clockdomain dsp_2420_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2420_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+static struct clockdomain core_l3_2420_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+static struct clockdomain core_l4_2420_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .wkdep_srcs = core_2420_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2420_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap242x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2420_clkdm,
+ &iva1_2420_clkdm,
+ &dsp_2420_clkdm,
+ &gfx_2420_clkdm,
+ &core_l3_2420_clkdm,
+ &core_l4_2420_clkdm,
+ &dss_2420_clkdm,
+ NULL,
+};
+
+void __init omap242x_clockdomains_init(void)
+{
+ if (!cpu_is_omap242x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap242x);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains2430_data.c b/arch/arm/mach-omap2/clockdomains2430_data.c
new file mode 100644
index 0000000..3645ed0
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains2430_data.c
@@ -0,0 +1,181 @@
+/*
+ * OMAP2xxx clockdomains
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup dependencies
+ * for OMAP2xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs must have a dep_bit assigned. So
+ * wkdep_srcs are really just software-controllable dependencies.
+ * Non-software-controllable dependencies do exist, but they are not
+ * encoded below (yet).
+ *
+ * 24xx does not support programmable sleep dependencies (SLEEPDEP)
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* Wakeup dependency source arrays */
+
+/* 2430-specific possible wakeup dependencies */
+
+/* 2430 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP, MDM */
+static struct clkdm_dep core_2430_wkdeps[] = {
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "gfx_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MPU: CORE, DSP, WKUP, MDM */
+static struct clkdm_dep mpu_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "dsp_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "mdm_clkdm" },
+ { NULL },
+};
+
+/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
+static struct clkdm_dep mdm_2430_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/*
+ * 2430-only clockdomains
+ */
+
+static struct clockdomain mpu_2430_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = mpu_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_MDM */
+static struct clockdomain mdm_clkdm = {
+ .name = "mdm_clkdm",
+ .pwrdm = { .name = "mdm_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
+ .wkdep_srcs = mdm_2430_wkdeps,
+ .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
+};
+
+static struct clockdomain dsp_2430_clkdm = {
+ .name = "dsp_clkdm",
+ .pwrdm = { .name = "dsp_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
+ .wkdep_srcs = dsp_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
+};
+
+static struct clockdomain gfx_2430_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_24xx_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_2430_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_2430_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP24XX_EN_CORE_SHIFT,
+ .wkdep_srcs = core_2430_wkdeps,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
+};
+
+static struct clockdomain dss_2430_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
+};
+
+static struct clockdomain *clockdomains_omap243x[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_2430_clkdm,
+ &mdm_clkdm,
+ &dsp_2430_clkdm,
+ &gfx_2430_clkdm,
+ &core_l3_2430_clkdm,
+ &core_l4_2430_clkdm,
+ &dss_2430_clkdm,
+ NULL,
+};
+
+void __init omap243x_clockdomains_init(void)
+{
+ if (!cpu_is_omap243x())
+ return;
+
+ clkdm_register_platform_funcs(&omap2_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap243x);
+ clkdm_complete_init();
+}
+
diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 13bde95..0a6a048 100644
--- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
- * OMAP2/3 clockdomains
+ * OMAP2/3 clockdomain common data
*
- * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -51,374 +51,28 @@
* changed in software) are not included here yet, but should be.
*/
-/* OMAP2/3-common wakeup dependencies */
-
-/*
- * 2420/2430 PM_WKDEP_GFX: CORE, MPU, WKUP
- * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
- * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 24XX-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP2
-
/* Wakeup dependency source arrays */
-/* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
-static struct clkdm_dep dsp_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
+/* 2xxx-specific possible dependencies */
+
+/* 2xxx PM_WKDEP_GFX: CORE, MPU, WKUP */
+struct clkdm_dep gfx_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_MPU: CORE, DSP, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep mpu_24xx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
+/* 2xxx PM_WKDEP_DSP: CORE, MPU, WKUP */
+struct clkdm_dep dsp_24xx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
{ NULL },
};
-/*
- * 2420 PM_WKDEP_CORE: DSP, GFX, MPU, WKUP
- * 2430 adds MDM
- */
-static struct clkdm_dep core_24xx_wkdeps[] = {
- {
- .clkdm_name = "dsp_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mdm_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP2 */
-
-/* 2430-specific possible wakeup dependencies */
-
-#ifdef CONFIG_SOC_OMAP2430
-
-/* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
-static struct clkdm_dep mdm_2430_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX)
- },
- { NULL },
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/* OMAP3-specific possible dependencies */
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep per_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
-static struct clkdm_dep usbhost_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
-static struct clkdm_dep mpu_3xxx_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
-static struct clkdm_dep iva2_wkdeps[] = {
- {
- .clkdm_name = "core_l3_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "core_l4_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
-static struct clkdm_dep cam_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
-static struct clkdm_dep dss_wkdeps[] = {
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: PM_WKDEP_NEON: MPU */
-static struct clkdm_dep neon_wkdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-
-/* Sleep dependency source arrays for OMAP3-specific clkdms */
-
-/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
-static struct clkdm_dep dss_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
-static struct clkdm_dep per_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
-static struct clkdm_dep usbhost_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm_name = "iva2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/* 3430: CM_SLEEPDEP_CAM: MPU */
-static struct clkdm_dep cam_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-/*
- * 3430ES1: CM_SLEEPDEP_GFX: MPU
- * 3430ES2: CM_SLEEPDEP_SGX: MPU
- * These can share data since they will never be present simultaneously
- * on the same device.
- */
-static struct clkdm_dep gfx_sgx_sleepdeps[] = {
- {
- .clkdm_name = "mpu_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- { NULL },
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* OMAP2/3-common clockdomains
@@ -430,439 +84,18 @@
*/
/* This is an implicit clockdomain - it is never defined as such in TRM */
-static struct clockdomain wkup_clkdm = {
+struct clockdomain wkup_common_clkdm = {
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain prm_clkdm = {
+struct clockdomain prm_common_clkdm = {
.name = "prm_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-static struct clockdomain cm_clkdm = {
+struct clockdomain cm_common_clkdm = {
.name = "cm_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
};
-
-/*
- * 2420-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2420)
-
-static struct clockdomain mpu_2420_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain iva1_2420_clkdm = {
- .name = "iva1_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dsp_2420_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain gfx_2420_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l3_2420_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain core_l4_2420_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-static struct clockdomain dss_2420_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
-};
-
-#endif /* CONFIG_SOC_OMAP2420 */
-
-
-/*
- * 2430-only clockdomains
- */
-
-#if defined(CONFIG_SOC_OMAP2430)
-
-static struct clockdomain mpu_2430_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = mpu_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/* Another case of bit name collisions between several registers: EN_MDM */
-static struct clockdomain mdm_clkdm = {
- .name = "mdm_clkdm",
- .pwrdm = { .name = "mdm_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
- .wkdep_srcs = mdm_2430_wkdeps,
- .clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dsp_2430_clkdm = {
- .name = "dsp_clkdm",
- .pwrdm = { .name = "dsp_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
- .wkdep_srcs = dsp_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain gfx_2430_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_2430_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_24xx_clkdm and core_l4_24xx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_2430_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP24XX_EN_CORE_SHIFT,
- .wkdep_srcs = core_24xx_wkdeps,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-static struct clockdomain dss_2430_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
-};
-
-#endif /* CONFIG_SOC_OMAP2430 */
-
-
-/*
- * OMAP3 clockdomains
- */
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct clockdomain mpu_3xxx_clkdm = {
- .name = "mpu_clkdm",
- .pwrdm = { .name = "mpu_pwrdm" },
- .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
- .dep_bit = OMAP3430_EN_MPU_SHIFT,
- .wkdep_srcs = mpu_3xxx_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain neon_clkdm = {
- .name = "neon_clkdm",
- .pwrdm = { .name = "neon_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = neon_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain iva2_clkdm = {
- .name = "iva2_clkdm",
- .pwrdm = { .name = "iva2_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
- .wkdep_srcs = iva2_wkdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain gfx_3430es1_clkdm = {
- .name = "gfx_clkdm",
- .pwrdm = { .name = "gfx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
-};
-
-static struct clockdomain sgx_clkdm = {
- .name = "sgx_clkdm",
- .pwrdm = { .name = "sgx_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = gfx_sgx_wkdeps,
- .sleepdep_srcs = gfx_sgx_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-/*
- * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
- * then that information was removed from the 34xx ES2+ TRM. It is
- * unclear whether the core is still there, but the clockdomain logic
- * is there, and must be programmed to an appropriate state if the
- * CORE clockdomain is to become inactive.
- */
-static struct clockdomain d2d_clkdm = {
- .name = "d2d_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l3_3xxx_clkdm = {
- .name = "core_l3_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * XXX add usecounting for clkdm dependencies, otherwise the presence
- * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
- * could cause trouble
- */
-static struct clockdomain core_l4_3xxx_clkdm = {
- .name = "core_l4_clkdm",
- .pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
- .dep_bit = OMAP3430_EN_CORE_SHIFT,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/* Another case of bit name collisions between several registers: EN_DSS */
-static struct clockdomain dss_3xxx_clkdm = {
- .name = "dss_clkdm",
- .pwrdm = { .name = "dss_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
- .wkdep_srcs = dss_wkdeps,
- .sleepdep_srcs = dss_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain cam_clkdm = {
- .name = "cam_clkdm",
- .pwrdm = { .name = "cam_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = cam_wkdeps,
- .sleepdep_srcs = cam_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain usbhost_clkdm = {
- .name = "usbhost_clkdm",
- .pwrdm = { .name = "usbhost_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .wkdep_srcs = usbhost_wkdeps,
- .sleepdep_srcs = usbhost_sleepdeps,
- .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-static struct clockdomain per_clkdm = {
- .name = "per_clkdm",
- .pwrdm = { .name = "per_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
- .dep_bit = OMAP3430_EN_PER_SHIFT,
- .wkdep_srcs = per_wkdeps,
- .sleepdep_srcs = per_sleepdeps,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-/*
- * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
- * switched of even if sdti is in use
- */
-static struct clockdomain emu_clkdm = {
- .name = "emu_clkdm",
- .pwrdm = { .name = "emu_pwrdm" },
- .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
- .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll1_clkdm = {
- .name = "dpll1_clkdm",
- .pwrdm = { .name = "dpll1_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll2_clkdm = {
- .name = "dpll2_clkdm",
- .pwrdm = { .name = "dpll2_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll3_clkdm = {
- .name = "dpll3_clkdm",
- .pwrdm = { .name = "dpll3_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll4_clkdm = {
- .name = "dpll4_clkdm",
- .pwrdm = { .name = "dpll4_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
-};
-
-static struct clockdomain dpll5_clkdm = {
- .name = "dpll5_clkdm",
- .pwrdm = { .name = "dpll5_pwrdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
-};
-
-#endif /* CONFIG_ARCH_OMAP3 */
-
-/*
- * Clockdomain hwsup dependencies (OMAP3 only)
- */
-
-static struct clkdm_autodep clkdm_autodeps[] = {
- {
- .clkdm = { .name = "mpu_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = "iva2_clkdm" },
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
- },
- {
- .clkdm = { .name = NULL },
- }
-};
-
-static struct clockdomain *clockdomains_omap2[] __initdata = {
- &wkup_clkdm,
- &cm_clkdm,
- &prm_clkdm,
-
-#ifdef CONFIG_SOC_OMAP2420
- &mpu_2420_clkdm,
- &iva1_2420_clkdm,
- &dsp_2420_clkdm,
- &gfx_2420_clkdm,
- &core_l3_2420_clkdm,
- &core_l4_2420_clkdm,
- &dss_2420_clkdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mpu_2430_clkdm,
- &mdm_clkdm,
- &dsp_2430_clkdm,
- &gfx_2430_clkdm,
- &core_l3_2430_clkdm,
- &core_l4_2430_clkdm,
- &dss_2430_clkdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
- &mpu_3xxx_clkdm,
- &neon_clkdm,
- &iva2_clkdm,
- &gfx_3430es1_clkdm,
- &sgx_clkdm,
- &d2d_clkdm,
- &core_l3_3xxx_clkdm,
- &core_l4_3xxx_clkdm,
- &dss_3xxx_clkdm,
- &cam_clkdm,
- &usbhost_clkdm,
- &per_clkdm,
- &emu_clkdm,
- &dpll1_clkdm,
- &dpll2_clkdm,
- &dpll3_clkdm,
- &dpll4_clkdm,
- &dpll5_clkdm,
-#endif
- NULL,
-};
-
-void __init omap2xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap2_clkdm_operations);
-}
-
-void __init omap3xxx_clockdomains_init(void)
-{
- clkdm_init(clockdomains_omap2, clkdm_autodeps, &omap3_clkdm_operations);
-}
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c
new file mode 100644
index 0000000..b84e138
--- /dev/null
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -0,0 +1,398 @@
+/*
+ * OMAP3xxx clockdomains
+ *
+ * Copyright (C) 2008-2011 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley, Jouni Högander
+ *
+ * This file contains clockdomains and clockdomain wakeup/sleep
+ * dependencies for the OMAP3xxx chips. Some notes:
+ *
+ * A useful validation rule for struct clockdomain: Any clockdomain
+ * referenced by a wkdep_srcs or sleepdep_srcs array must have a
+ * dep_bit assigned. So wkdep_srcs/sleepdep_srcs are really just
+ * software-controllable dependencies. Non-software-controllable
+ * dependencies do exist, but they are not encoded below (yet).
+ *
+ * The overly-specific dep_bit names are due to a bit name collision
+ * with CM_FCLKEN_{DSP,IVA2}. The DSP/IVA2 PM_WKDEP and CM_SLEEPDEP shift
+ * value are the same for all powerdomains: 2
+ *
+ * XXX should dep_bit be a mask, so we can test to see if it is 0 as a
+ * sanity check?
+ * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
+ */
+
+/*
+ * To-Do List
+ * -> Port the Sleep/Wakeup dependencies for the domains
+ * from the Power domain framework
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * Clockdomain dependencies for wkdeps/sleepdeps
+ *
+ * XXX Hardware dependencies (e.g., dependencies that cannot be
+ * changed in software) are not included here yet, but should be.
+ */
+
+/* OMAP3-specific possible dependencies */
+
+/*
+ * 3430ES1 PM_WKDEP_GFX: adds IVA2, removes CORE
+ * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
+ */
+static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm", },
+ { .clkdm_name = "mpu_clkdm", },
+ { .clkdm_name = "wkup_clkdm", },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_PER: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep per_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: PM_WKDEP_USBHOST: CORE, IVA2, MPU, WKUP */
+static struct clkdm_dep usbhost_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_MPU: CORE, IVA2, DSS, PER */
+static struct clkdm_dep mpu_3xxx_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_IVA2: CORE, MPU, WKUP, DSS, PER */
+static struct clkdm_dep iva2_wkdeps[] = {
+ { .clkdm_name = "core_l3_clkdm" },
+ { .clkdm_name = "core_l4_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { .clkdm_name = "dss_clkdm" },
+ { .clkdm_name = "per_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_CAM: IVA2, MPU, WKUP */
+static struct clkdm_dep cam_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430 PM_WKDEP_DSS: IVA2, MPU, WKUP */
+static struct clkdm_dep dss_wkdeps[] = {
+ { .clkdm_name = "iva2_clkdm" },
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "wkup_clkdm" },
+ { NULL },
+};
+
+/* 3430: PM_WKDEP_NEON: MPU */
+static struct clkdm_dep neon_wkdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/* Sleep dependency source arrays for OMAP3-specific clkdms */
+
+/* 3430: CM_SLEEPDEP_DSS: MPU, IVA */
+static struct clkdm_dep dss_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_PER: MPU, IVA */
+static struct clkdm_dep per_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430ES2: CM_SLEEPDEP_USBHOST: MPU, IVA */
+static struct clkdm_dep usbhost_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { .clkdm_name = "iva2_clkdm" },
+ { NULL },
+};
+
+/* 3430: CM_SLEEPDEP_CAM: MPU */
+static struct clkdm_dep cam_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * 3430ES1: CM_SLEEPDEP_GFX: MPU
+ * 3430ES2: CM_SLEEPDEP_SGX: MPU
+ * These can share data since they will never be present simultaneously
+ * on the same device.
+ */
+static struct clkdm_dep gfx_sgx_sleepdeps[] = {
+ { .clkdm_name = "mpu_clkdm" },
+ { NULL },
+};
+
+/*
+ * OMAP3 clockdomains
+ */
+
+static struct clockdomain mpu_3xxx_clkdm = {
+ .name = "mpu_clkdm",
+ .pwrdm = { .name = "mpu_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
+ .dep_bit = OMAP3430_EN_MPU_SHIFT,
+ .wkdep_srcs = mpu_3xxx_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
+};
+
+static struct clockdomain neon_clkdm = {
+ .name = "neon_clkdm",
+ .pwrdm = { .name = "neon_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = neon_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
+};
+
+static struct clockdomain iva2_clkdm = {
+ .name = "iva2_clkdm",
+ .pwrdm = { .name = "iva2_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
+ .wkdep_srcs = iva2_wkdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
+};
+
+static struct clockdomain gfx_3430es1_clkdm = {
+ .name = "gfx_clkdm",
+ .pwrdm = { .name = "gfx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
+};
+
+static struct clockdomain sgx_clkdm = {
+ .name = "sgx_clkdm",
+ .pwrdm = { .name = "sgx_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = gfx_sgx_3xxx_wkdeps,
+ .sleepdep_srcs = gfx_sgx_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
+};
+
+/*
+ * The die-to-die clockdomain was documented in the 34xx ES1 TRM, but
+ * then that information was removed from the 34xx ES2+ TRM. It is
+ * unclear whether the core is still there, but the clockdomain logic
+ * is there, and must be programmed to an appropriate state if the
+ * CORE clockdomain is to become inactive.
+ */
+static struct clockdomain d2d_clkdm = {
+ .name = "d2d_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l3_3xxx_clkdm = {
+ .name = "core_l3_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
+};
+
+/*
+ * XXX add usecounting for clkdm dependencies, otherwise the presence
+ * of a single dep bit for core_l3_3xxx_clkdm and core_l4_3xxx_clkdm
+ * could cause trouble
+ */
+static struct clockdomain core_l4_3xxx_clkdm = {
+ .name = "core_l4_clkdm",
+ .pwrdm = { .name = "core_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP,
+ .dep_bit = OMAP3430_EN_CORE_SHIFT,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
+};
+
+/* Another case of bit name collisions between several registers: EN_DSS */
+static struct clockdomain dss_3xxx_clkdm = {
+ .name = "dss_clkdm",
+ .pwrdm = { .name = "dss_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
+ .wkdep_srcs = dss_wkdeps,
+ .sleepdep_srcs = dss_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_DSS_MASK,
+};
+
+static struct clockdomain cam_clkdm = {
+ .name = "cam_clkdm",
+ .pwrdm = { .name = "cam_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = cam_wkdeps,
+ .sleepdep_srcs = cam_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
+};
+
+static struct clockdomain usbhost_clkdm = {
+ .name = "usbhost_clkdm",
+ .pwrdm = { .name = "usbhost_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .wkdep_srcs = usbhost_wkdeps,
+ .sleepdep_srcs = usbhost_sleepdeps,
+ .clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
+};
+
+static struct clockdomain per_clkdm = {
+ .name = "per_clkdm",
+ .pwrdm = { .name = "per_pwrdm" },
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .dep_bit = OMAP3430_EN_PER_SHIFT,
+ .wkdep_srcs = per_wkdeps,
+ .sleepdep_srcs = per_sleepdeps,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_PER_MASK,
+};
+
+/*
+ * Disable hw supervised mode for emu_clkdm, because emu_pwrdm is
+ * switched of even if sdti is in use
+ */
+static struct clockdomain emu_clkdm = {
+ .name = "emu_clkdm",
+ .pwrdm = { .name = "emu_pwrdm" },
+ .flags = /* CLKDM_CAN_ENABLE_AUTO | */CLKDM_CAN_SWSUP,
+ .clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
+};
+
+static struct clockdomain dpll1_clkdm = {
+ .name = "dpll1_clkdm",
+ .pwrdm = { .name = "dpll1_pwrdm" },
+};
+
+static struct clockdomain dpll2_clkdm = {
+ .name = "dpll2_clkdm",
+ .pwrdm = { .name = "dpll2_pwrdm" },
+};
+
+static struct clockdomain dpll3_clkdm = {
+ .name = "dpll3_clkdm",
+ .pwrdm = { .name = "dpll3_pwrdm" },
+};
+
+static struct clockdomain dpll4_clkdm = {
+ .name = "dpll4_clkdm",
+ .pwrdm = { .name = "dpll4_pwrdm" },
+};
+
+static struct clockdomain dpll5_clkdm = {
+ .name = "dpll5_clkdm",
+ .pwrdm = { .name = "dpll5_pwrdm" },
+};
+
+/*
+ * Clockdomain hwsup dependencies
+ */
+
+static struct clkdm_autodep clkdm_autodeps[] = {
+ {
+ .clkdm = { .name = "mpu_clkdm" },
+ },
+ {
+ .clkdm = { .name = "iva2_clkdm" },
+ },
+ {
+ .clkdm = { .name = NULL },
+ }
+};
+
+/*
+ *
+ */
+
+static struct clockdomain *clockdomains_omap3430_common[] __initdata = {
+ &wkup_common_clkdm,
+ &cm_common_clkdm,
+ &prm_common_clkdm,
+ &mpu_3xxx_clkdm,
+ &neon_clkdm,
+ &iva2_clkdm,
+ &d2d_clkdm,
+ &core_l3_3xxx_clkdm,
+ &core_l4_3xxx_clkdm,
+ &dss_3xxx_clkdm,
+ &cam_clkdm,
+ &per_clkdm,
+ &emu_clkdm,
+ &dpll1_clkdm,
+ &dpll2_clkdm,
+ &dpll3_clkdm,
+ &dpll4_clkdm,
+ NULL
+};
+
+static struct clockdomain *clockdomains_omap3430es1[] __initdata = {
+ &gfx_3430es1_clkdm,
+ NULL,
+};
+
+static struct clockdomain *clockdomains_omap3430es2plus[] __initdata = {
+ &sgx_clkdm,
+ &dpll5_clkdm,
+ &usbhost_clkdm,
+ NULL,
+};
+
+void __init omap3xxx_clockdomains_init(void)
+{
+ struct clockdomain **sc;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ clkdm_register_platform_funcs(&omap3_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap3430_common);
+
+ sc = (omap_rev() == OMAP3430_REV_ES1_0) ? clockdomains_omap3430es1 :
+ clockdomains_omap3430es2plus;
+
+ clkdm_register_clkdms(sc);
+
+ clkdm_register_autodeps(clkdm_autodeps);
+ clkdm_complete_init();
+}
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index dccc651..9299ac2 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -34,350 +34,122 @@
/* Static Dependencies for OMAP4 Clock Domains */
static struct clkdm_dep d2d_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep ducati_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep iss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dma_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_dss_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_gfx_wkup_sleep_deps[] = {
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
{ NULL },
};
static struct clkdm_dep l3_init_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
{ NULL },
};
static struct clkdm_dep mpu_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ducati_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_dss_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_gfx_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_secure_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "tesla_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ducati_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_dss_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_gfx_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_secure_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
+ { .clkdm_name = "tesla_clkdm" },
{ NULL },
};
static struct clkdm_dep tesla_wkup_sleep_deps[] = {
- {
- .clkdm_name = "abe_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "ivahd_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_1_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_2_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_emif_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l3_init_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_cfg_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_per_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
- {
- .clkdm_name = "l4_wkup_clkdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
- },
+ { .clkdm_name = "abe_clkdm" },
+ { .clkdm_name = "ivahd_clkdm" },
+ { .clkdm_name = "l3_1_clkdm" },
+ { .clkdm_name = "l3_2_clkdm" },
+ { .clkdm_name = "l3_emif_clkdm" },
+ { .clkdm_name = "l3_init_clkdm" },
+ { .clkdm_name = "l4_cfg_clkdm" },
+ { .clkdm_name = "l4_per_clkdm" },
+ { .clkdm_name = "l4_wkup_clkdm" },
{ NULL },
};
@@ -388,7 +160,6 @@
.cm_inst = OMAP4430_CM2_CEFUSE_INST,
.clkdm_offs = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_cfg_44xx_clkdm = {
@@ -399,7 +170,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L4CFG_CDOFFS,
.dep_bit = OMAP4430_L4CFG_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain tesla_44xx_clkdm = {
@@ -412,7 +182,6 @@
.wkdep_srcs = tesla_wkup_sleep_deps,
.sleepdep_srcs = tesla_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_gfx_44xx_clkdm = {
@@ -425,7 +194,6 @@
.wkdep_srcs = l3_gfx_wkup_sleep_deps,
.sleepdep_srcs = l3_gfx_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ivahd_44xx_clkdm = {
@@ -438,7 +206,6 @@
.wkdep_srcs = ivahd_wkup_sleep_deps,
.sleepdep_srcs = ivahd_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_secure_44xx_clkdm = {
@@ -451,7 +218,6 @@
.wkdep_srcs = l4_secure_wkup_sleep_deps,
.sleepdep_srcs = l4_secure_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_per_44xx_clkdm = {
@@ -462,7 +228,6 @@
.clkdm_offs = OMAP4430_CM2_L4PER_L4PER_CDOFFS,
.dep_bit = OMAP4430_L4PER_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain abe_44xx_clkdm = {
@@ -473,7 +238,6 @@
.clkdm_offs = OMAP4430_CM1_ABE_ABE_CDOFFS,
.dep_bit = OMAP4430_ABE_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_instr_44xx_clkdm = {
@@ -482,7 +246,6 @@
.prcm_partition = OMAP4430_CM2_PARTITION,
.cm_inst = OMAP4430_CM2_CORE_INST,
.clkdm_offs = OMAP4430_CM2_CORE_L3INSTR_CDOFFS,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_init_44xx_clkdm = {
@@ -495,7 +258,6 @@
.wkdep_srcs = l3_init_wkup_sleep_deps,
.sleepdep_srcs = l3_init_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain d2d_44xx_clkdm = {
@@ -507,7 +269,6 @@
.wkdep_srcs = d2d_wkup_sleep_deps,
.sleepdep_srcs = d2d_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu0_44xx_clkdm = {
@@ -517,7 +278,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU0_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU0_CPU0_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu1_44xx_clkdm = {
@@ -527,7 +287,6 @@
.cm_inst = OMAP4430_PRCM_MPU_CPU1_INST,
.clkdm_offs = OMAP4430_PRCM_MPU_CPU1_CPU1_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_emif_44xx_clkdm = {
@@ -538,7 +297,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_MEMIF_CDOFFS,
.dep_bit = OMAP4430_MEMIF_STATDEP_SHIFT,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_ao_44xx_clkdm = {
@@ -548,7 +306,6 @@
.cm_inst = OMAP4430_CM2_ALWAYS_ON_INST,
.clkdm_offs = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain ducati_44xx_clkdm = {
@@ -561,7 +318,6 @@
.wkdep_srcs = ducati_wkup_sleep_deps,
.sleepdep_srcs = ducati_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu_44xx_clkdm = {
@@ -573,7 +329,6 @@
.wkdep_srcs = mpu_wkup_sleep_deps,
.sleepdep_srcs = mpu_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_2_44xx_clkdm = {
@@ -584,7 +339,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_2_CDOFFS,
.dep_bit = OMAP4430_L3_2_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_1_44xx_clkdm = {
@@ -595,7 +349,6 @@
.clkdm_offs = OMAP4430_CM2_CORE_L3_1_CDOFFS,
.dep_bit = OMAP4430_L3_1_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain iss_44xx_clkdm = {
@@ -607,7 +360,6 @@
.wkdep_srcs = iss_wkup_sleep_deps,
.sleepdep_srcs = iss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dss_44xx_clkdm = {
@@ -620,7 +372,6 @@
.wkdep_srcs = l3_dss_wkup_sleep_deps,
.sleepdep_srcs = l3_dss_wkup_sleep_deps,
.flags = CLKDM_CAN_HWSUP_SWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l4_wkup_44xx_clkdm = {
@@ -631,7 +382,6 @@
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain emu_sys_44xx_clkdm = {
@@ -641,7 +391,6 @@
.cm_inst = OMAP4430_PRM_EMU_CM_INST,
.clkdm_offs = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
.flags = CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_dma_44xx_clkdm = {
@@ -653,7 +402,6 @@
.wkdep_srcs = l3_dma_wkup_sleep_deps,
.sleepdep_srcs = l3_dma_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* As clockdomains are added or removed above, this list must also be changed */
@@ -685,7 +433,10 @@
NULL
};
+
void __init omap44xx_clockdomains_init(void)
{
- clkdm_init(clockdomains_omap44xx, NULL, &omap4_clkdm_operations);
+ clkdm_register_platform_funcs(&omap4_clkdm_operations);
+ clkdm_register_clkdms(clockdomains_omap44xx);
+ clkdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 3f20cbb..110e5b9 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -45,17 +45,22 @@
static struct omap_globals omap242x_globals = {
.class = OMAP242X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x48014000),
- .sdrc = OMAP2420_SDRC_BASE,
- .sms = OMAP2420_SMS_BASE,
- .ctrl = OMAP242X_CTRL_BASE,
- .prm = OMAP2420_PRM_BASE,
- .cm = OMAP2420_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
};
void __init omap2_set_globals_242x(void)
{
__omap2_set_globals(&omap242x_globals);
}
+
+void __init omap242x_map_io(void)
+{
+ omap242x_map_common_io();
+}
#endif
#if defined(CONFIG_SOC_OMAP2430)
@@ -63,17 +68,22 @@
static struct omap_globals omap243x_globals = {
.class = OMAP243X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
- .sdrc = OMAP243X_SDRC_BASE,
- .sms = OMAP243X_SMS_BASE,
- .ctrl = OMAP243X_CTRL_BASE,
- .prm = OMAP2430_PRM_BASE,
- .cm = OMAP2430_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
};
void __init omap2_set_globals_243x(void)
{
__omap2_set_globals(&omap243x_globals);
}
+
+void __init omap243x_map_io(void)
+{
+ omap243x_map_common_io();
+}
#endif
#if defined(CONFIG_ARCH_OMAP3)
@@ -81,11 +91,11 @@
static struct omap_globals omap3_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
- .sdrc = OMAP343X_SDRC_BASE,
- .sms = OMAP343X_SMS_BASE,
- .ctrl = OMAP343X_CTRL_BASE,
- .prm = OMAP3430_PRM_BASE,
- .cm = OMAP3430_CM_BASE,
+ .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+ .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
};
void __init omap2_set_globals_3xxx(void)
@@ -95,7 +105,6 @@
void __init omap3_map_io(void)
{
- omap2_set_globals_3xxx();
omap34xx_map_common_io();
}
@@ -110,9 +119,9 @@
static struct omap_globals ti816x_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
- .ctrl = TI816X_CTRL_BASE,
- .prm = TI816X_PRCM_BASE,
- .cm = TI816X_PRCM_BASE,
+ .ctrl = OMAP2_L4_IO_ADDRESS(TI816X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(TI816X_PRCM_BASE),
};
void __init omap2_set_globals_ti816x(void)
@@ -125,11 +134,11 @@
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl = OMAP443X_SCM_BASE,
- .ctrl_pad = OMAP443X_CTRL_BASE,
- .prm = OMAP4430_PRM_BASE,
- .cm = OMAP4430_CM_BASE,
- .cm2 = OMAP4430_CM2_BASE,
+ .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+ .ctrl_pad = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+ .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
};
void __init omap2_set_globals_443x(void)
@@ -138,5 +147,10 @@
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
}
+
+void __init omap4_map_io(void)
+{
+ omap44xx_map_common_io();
+}
#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index aab884f..e34d27f 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -149,17 +149,11 @@
void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->ctrl) {
- omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
- WARN_ON(!omap2_ctrl_base);
- }
+ if (omap2_globals->ctrl)
+ omap2_ctrl_base = omap2_globals->ctrl;
- /* Static mapping, never released */
- if (omap2_globals->ctrl_pad) {
- omap4_ctrl_pad_base = ioremap(omap2_globals->ctrl_pad, SZ_4K);
- WARN_ON(!omap4_ctrl_pad_base);
- }
+ if (omap2_globals->ctrl_pad)
+ omap4_ctrl_pad_base = omap2_globals->ctrl_pad;
}
void __iomem *omap_ctrl_base_get(void)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index ae8ea5b..68ec031 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -16,6 +16,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -43,7 +44,7 @@
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/*
@@ -60,12 +61,12 @@
if (!oh)
pr_err("could not look up %s\n", oh_name);
- od = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
+ pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0,
NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap3_l3_init);
@@ -73,9 +74,13 @@
{
int l, i;
struct omap_hwmod *oh[3];
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
+ /* If dtb is there, the devices will be created dynamically */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
/*
* To avoid code running on other OMAPs in
* multi-omap builds
@@ -91,12 +96,12 @@
pr_err("could not look up %s\n", oh_name);
}
- od = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
+ pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL,
0, NULL, 0, 0);
- WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
- return IS_ERR(od) ? PTR_ERR(od) : 0;
+ return IS_ERR(pdev) ? PTR_ERR(pdev) : 0;
}
postcore_initcall(omap4_l3_init);
@@ -220,18 +225,10 @@
#endif
}
-struct omap_device_pm_latency omap_keyboard_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
struct omap4_keypad_platform_data *keypad_data;
unsigned int id = -1;
@@ -246,15 +243,13 @@
keypad_data = sdp4430_keypad_data;
- od = omap_device_build(name, id, oh, keypad_data,
- sizeof(struct omap4_keypad_platform_data),
- omap_keyboard_latency,
- ARRAY_SIZE(omap_keyboard_latency), 0);
+ pdev = omap_device_build(name, id, oh, keypad_data,
+ sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
@@ -262,18 +257,10 @@
}
#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
- [0] = {
- .activate_func = omap_device_enable_hwmods,
- .deactivate_func = omap_device_idle_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline void omap_init_mbox(void)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
@@ -281,10 +268,9 @@
return;
}
- od = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
- mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
- WARN(IS_ERR(od), "%s: could not build device, err %ld\n",
- __func__, PTR_ERR(od));
+ pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
+ __func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
@@ -365,17 +351,9 @@
#include <plat/mcspi.h>
-struct omap_device_pm_latency omap_mcspi_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
char *name = "omap2_mcspi";
struct omap2_mcspi_platform_config *pdata;
static int spi_num;
@@ -402,10 +380,9 @@
}
spi_num++;
- od = omap_device_build(name, spi_num, oh, pdata,
- sizeof(*pdata), omap_mcspi_latency,
- ARRAY_SIZE(omap_mcspi_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
+ pdev = omap_device_build(name, spi_num, oh, pdata,
+ sizeof(*pdata), NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
@@ -730,18 +707,10 @@
arch_initcall(omap2_init_devices);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int __init omap_init_wdt(void)
{
int id = -1;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_hwmod *oh;
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
@@ -755,10 +724,8 @@
return -EINVAL;
}
- od = omap_device_build(dev_name, id, oh, NULL, 0,
- omap_wdt_latency,
- ARRAY_SIZE(omap_wdt_latency), 0);
- WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
+ pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 62510ec..4036821 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -37,14 +37,6 @@
},
};
-static struct omap_device_pm_latency omap_dss_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
struct omap_dss_hwmod_data {
const char *oh_name;
const char *dev_name;
@@ -127,7 +119,7 @@
{
int r = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
int i, oh_count;
struct omap_display_platform_data pdata;
const struct omap_dss_hwmod_data *curr_dss_hwmod;
@@ -162,13 +154,12 @@
return -ENODEV;
}
- od = omap_device_build(curr_dss_hwmod[i].dev_name,
+ pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
curr_dss_hwmod[i].id, oh, &pdata,
sizeof(struct omap_display_platform_data),
- omap_dss_latency,
- ARRAY_SIZE(omap_dss_latency), 0);
+ NULL, 0, 0);
- if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n",
+ if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
curr_dss_hwmod[i].oh_name))
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index c9ff0e7..a59a45a 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -87,14 +87,6 @@
[CCDN] = 0xd8,
};
-static struct omap_device_pm_latency omap2_dma_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void __iomem *dma_base;
static inline void dma_write(u32 val, int reg, int lch)
{
@@ -228,7 +220,7 @@
/* One time initializations */
static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_system_dma_plat_info *p;
struct resource *mem;
char *name = "omap_dma_system";
@@ -258,23 +250,22 @@
p->errata = configure_dma_errata();
- od = omap_device_build(name, 0, oh, p, sizeof(*p),
- omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+ pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
kfree(p);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n",
__func__, name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
- dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+ dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
return -EINVAL;
}
dma_base = ioremap(mem->start, resource_size(mem));
if (!dma_base) {
- dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+ dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
return -ENOMEM;
}
@@ -283,7 +274,7 @@
(d->lch_count), GFP_KERNEL);
if (!d->chan) {
- dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+ dev_err(&pdev->dev, "%s: kzalloc fail\n", __func__);
return -ENOMEM;
}
return 0;
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 2765cdc..8cbfbc2 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,17 +24,9 @@
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-static struct omap_device_pm_latency omap_gpio_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
{
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_gpio_platform_data *pdata;
struct omap_gpio_dev_attr *dev_attr;
char *name = "omap_gpio";
@@ -107,19 +99,17 @@
return -EINVAL;
}
- od = omap_device_build(name, id - 1, oh, pdata,
- sizeof(*pdata), omap_gpio_latency,
- ARRAY_SIZE(omap_gpio_latency),
- false);
+ pdev = omap_device_build(name, id - 1, oh, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n",
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
gpio_bank_count++;
return 0;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 097a42d..7708584 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -409,31 +409,17 @@
return 0;
}
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
- /*
- * XXX There should also be an entry here to power off/on the
- * MMC regulators/PBIAS cells, etc.
- */
-};
-
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
- struct omap_device *od;
- struct omap_device_pm_latency *ohl;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
struct omap_mmc_platform_data *mmc_data;
struct omap_mmc_dev_attr *mmc_dev_attr;
char *name;
int l;
- int ohl_cnt = 0;
mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
if (!mmc_data) {
@@ -448,8 +434,6 @@
omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
- ohl = omap_hsmmc_latency;
- ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
"mmc%d", ctrl_nr);
@@ -467,9 +451,9 @@
mmc_data->controller_flags = mmc_dev_attr->flags;
}
- od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
- sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
+ sizeof(struct omap_mmc_platform_data), NULL, 0, false);
+ if (IS_ERR(pdev)) {
WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
kfree(mmc_data->slots[0].name);
goto done;
@@ -478,7 +462,7 @@
* return device handle to board setup code
* required to populate for regulator framework structure
*/
- hsmmcinfo->dev = &od->pdev.dev;
+ hsmmcinfo->dev = &pdev->dev;
done:
kfree(mmc_data);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 06d4a80..454dfce 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -19,23 +19,20 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/hwspinlock.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
-struct omap_device_pm_latency omap_spinlock_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- }
+static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = {
+ .base_id = 0,
};
int __init hwspinlocks_init(void)
{
int retval = 0;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
const char *oh_name = "spinlock";
const char *dev_name = "omap_hwspinlock";
@@ -48,13 +45,13 @@
if (oh == NULL)
return -EINVAL;
- od = omap_device_build(dev_name, 0, oh, NULL, 0,
- omap_spinlock_latency,
- ARRAY_SIZE(omap_spinlock_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata,
+ sizeof(struct hwspinlock_pdata),
+ NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Can't build omap_device for %s:%s\n", dev_name,
oh_name);
- retval = PTR_ERR(od);
+ retval = PTR_ERR(pdev);
}
return retval;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 37efb86..d27daf9 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -28,7 +28,6 @@
#include "control.h"
-static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
u32 omap_features;
@@ -39,19 +38,6 @@
}
EXPORT_SYMBOL(omap_rev);
-/**
- * omap_chip_is - test whether currently running OMAP matches a chip type
- * @oc: omap_chip_t to test against
- *
- * Test whether the currently-running OMAP chip matches the supplied
- * chip type 'oc'. Returns 1 upon a match; 0 upon failure.
- */
-int omap_chip_is(struct omap_chip_id oci)
-{
- return (oci.oc & omap_chip.oc) ? 1 : 0;
-}
-EXPORT_SYMBOL(omap_chip_is);
-
int omap_type(void)
{
u32 val = 0;
@@ -242,14 +228,12 @@
omap_features = OMAP3_HAS_NEON;
}
-static void __init omap3_check_revision(void)
+static void __init omap3_check_revision(const char **cpu_rev)
{
u32 cpuid, idcode;
u16 hawkeye;
u8 rev;
- omap_chip.oc = CHIP_IS_OMAP3430;
-
/*
* We cannot access revision registers on ES1.0.
* If the processor type is Cortex-A8 and the revision is 0x0
@@ -258,7 +242,7 @@
cpuid = read_cpuid(CPUID_ID);
if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
omap_revision = OMAP3430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+ *cpu_rev = "1.0";
return;
}
@@ -279,77 +263,85 @@
case 0: /* Take care of early samples */
case 1:
omap_revision = OMAP3430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.0";
break;
case 2:
omap_revision = OMAP3430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES2;
+ *cpu_rev = "2.1";
break;
case 3:
omap_revision = OMAP3430_REV_ES3_0;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
+ *cpu_rev = "3.0";
break;
case 4:
omap_revision = OMAP3430_REV_ES3_1;
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1";
break;
case 7:
/* FALLTHROUGH */
default:
/* Use the latest known revision as default */
omap_revision = OMAP3430_REV_ES3_1_2;
-
- /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ *cpu_rev = "3.1.2";
}
break;
case 0xb868:
- /* Handle OMAP35xx/AM35xx devices
+ /*
+ * Handle OMAP/AM 3505/3517 devices
*
- * Set the device to be OMAP3505 here. Actual device
+ * Set the device to be OMAP3517 here. Actual device
* is identified later based on the features.
- *
- * REVISIT: AM3505/AM3517 should have their own CHIP_IS
*/
- omap_revision = OMAP3505_REV(rev);
- omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+ switch (rev) {
+ case 0:
+ omap_revision = OMAP3517_REV_ES1_0;
+ *cpu_rev = "1.0";
+ break;
+ case 1:
+ /* FALLTHROUGH */
+ default:
+ omap_revision = OMAP3517_REV_ES1_1;
+ *cpu_rev = "1.1";
+ }
break;
case 0xb891:
/* Handle 36xx devices */
- omap_chip.oc |= CHIP_IS_OMAP3630ES1;
switch(rev) {
case 0: /* Take care of early samples */
omap_revision = OMAP3630_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
omap_revision = OMAP3630_REV_ES1_1;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+ *cpu_rev = "1.1";
break;
case 2:
+ /* FALLTHROUGH */
default:
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
}
break;
case 0xb81e:
- omap_chip.oc = CHIP_IS_TI816X;
-
switch (rev) {
case 0:
omap_revision = TI8168_REV_ES1_0;
+ *cpu_rev = "1.0";
break;
case 1:
- omap_revision = TI8168_REV_ES1_1;
- break;
+ /* FALLTHROUGH */
default:
- omap_revision = TI8168_REV_ES1_1;
+ omap_revision = TI8168_REV_ES1_1;
+ *cpu_rev = "1.1";
+ break;
}
break;
default:
- /* Unknown default to latest silicon rev as default*/
- omap_revision = OMAP3630_REV_ES1_2;
- omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+ /* Unknown default to latest silicon rev as default */
+ omap_revision = OMAP3630_REV_ES1_2;
+ *cpu_rev = "1.2";
+ pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
}
}
@@ -382,24 +374,20 @@
switch (rev) {
case 0:
omap_revision = OMAP4430_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES1;
break;
case 1:
default:
omap_revision = OMAP4430_REV_ES2_0;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2;
}
break;
case 0xb95c:
switch (rev) {
case 3:
omap_revision = OMAP4430_REV_ES2_1;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_1;
break;
case 4:
default:
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
break;
case 0xb94e:
@@ -407,14 +395,12 @@
case 0:
default:
omap_revision = OMAP4460_REV_ES1_0;
- omap_chip.oc |= CHIP_IS_OMAP4460ES1_0;
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
- omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
pr_info("OMAP%04x ES%d.%d\n", omap_rev() >> 16,
@@ -425,94 +411,33 @@
if (omap3_has_ ##feat()) \
printk(#feat" ");
-static void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(const char *cpu_rev)
{
- u8 rev = GET_OMAP_REVISION();
- char cpu_name[16], cpu_rev[16];
+ const char *cpu_name;
- /* OMAP3430 and OMAP3530 are assumed to be same.
+ /*
+ * OMAP3430 and OMAP3530 are assumed to be same.
*
* OMAP3525, OMAP3515 and OMAP3503 can be detected only based
* on available features. Upon detection, update the CPU id
* and CPU class bits.
*/
if (cpu_is_omap3630()) {
- strcpy(cpu_name, "OMAP3630");
- } else if (cpu_is_omap3505()) {
- /*
- * AM35xx devices
- */
- if (omap3_has_sgx()) {
- omap_revision = OMAP3517_REV(rev);
- strcpy(cpu_name, "AM3517");
- } else {
- /* Already set in omap3_check_revision() */
- strcpy(cpu_name, "AM3505");
- }
+ cpu_name = "OMAP3630";
+ } else if (cpu_is_omap3517()) {
+ /* AM35xx devices */
+ cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
} else if (cpu_is_ti816x()) {
- strcpy(cpu_name, "TI816X");
+ cpu_name = "TI816X";
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
- strcpy(cpu_name, "OMAP3430/3530");
+ cpu_name = "OMAP3430/3530";
} else if (omap3_has_iva()) {
- omap_revision = OMAP3525_REV(rev);
- strcpy(cpu_name, "OMAP3525");
+ cpu_name = "OMAP3525";
} else if (omap3_has_sgx()) {
- omap_revision = OMAP3515_REV(rev);
- strcpy(cpu_name, "OMAP3515");
+ cpu_name = "OMAP3515";
} else {
- omap_revision = OMAP3503_REV(rev);
- strcpy(cpu_name, "OMAP3503");
- }
-
- if (cpu_is_omap3630() || cpu_is_ti816x()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "1.1");
- break;
- case OMAP_REVBITS_02:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.2");
- }
- } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "1.1");
- }
- } else {
- switch (rev) {
- case OMAP_REVBITS_00:
- strcpy(cpu_rev, "1.0");
- break;
- case OMAP_REVBITS_01:
- strcpy(cpu_rev, "2.0");
- break;
- case OMAP_REVBITS_02:
- strcpy(cpu_rev, "2.1");
- break;
- case OMAP_REVBITS_03:
- strcpy(cpu_rev, "3.0");
- break;
- case OMAP_REVBITS_04:
- strcpy(cpu_rev, "3.1");
- break;
- case OMAP_REVBITS_05:
- /* FALLTHROUGH */
- default:
- /* Use the latest known revision as default */
- strcpy(cpu_rev, "3.1.2");
- }
+ cpu_name = "OMAP3503";
}
/* Print verbose information */
@@ -533,6 +458,8 @@
*/
void __init omap2_check_revision(void)
{
+ const char *cpu_rev;
+
/*
* At this point we have an idea about the processor revision set
* earlier with omap2_set_globals_tap().
@@ -540,7 +467,7 @@
if (cpu_is_omap24xx()) {
omap24xx_check_revision();
} else if (cpu_is_omap34xx()) {
- omap3_check_revision();
+ omap3_check_revision(&cpu_rev);
/* TI816X doesn't have feature register */
if (!cpu_is_ti816x())
@@ -548,7 +475,7 @@
else
ti816x_check_features();
- omap3_cpuinfo();
+ omap3_cpuinfo(cpu_rev);
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
@@ -557,22 +484,6 @@
} else {
pr_err("OMAP revision unknown, please fix!\n");
}
-
- /*
- * OK, now we know the exact revision. Initialize omap_chip bits
- * for powerdowmain and clockdomain code.
- */
- if (cpu_is_omap243x()) {
- /* Currently only supports 2430ES2.1 and 2430-all */
- omap_chip.oc |= CHIP_IS_OMAP2430;
- return;
- } else if (cpu_is_omap242x()) {
- /* Currently only supports 2420ES2.1.1 and 2420-all */
- omap_chip.oc |= CHIP_IS_OMAP2420;
- return;
- }
-
- pr_err("Uninitialized omap_chip, please fix!\n");
}
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d6d01cb..a5d8dce 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -34,14 +34,16 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
-#include "io.h"
+#include <plat/common.h>
#include <plat/omap-pm.h>
+#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
+#include <plat/common.h>
/*
* The machine specific code may provide the extra mapping besides the
@@ -238,26 +240,11 @@
};
#endif
-static void __init _omap2_map_common_io(void)
-{
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- omap2_check_revision();
- omap_sram_init();
- omap_init_consistent_dma_size();
-}
-
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -266,7 +253,6 @@
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -274,7 +260,6 @@
void __init omap34xx_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -282,7 +267,6 @@
void __init omapti816x_map_common_io(void)
{
iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -290,7 +274,6 @@
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -336,30 +319,17 @@
/* See irq.c, omap4-common.c and entry-macro.S */
void __iomem *omap_irq_base;
-void __init omap2_init_common_infrastructure(void)
+static void __init omap_common_init_early(void)
+{
+ omap2_check_revision();
+ omap_ioremap_init();
+ omap_init_consistent_dma_size();
+}
+
+static void __init omap_hwmod_init_postsetup(void)
{
u8 postsetup_state;
- if (cpu_is_omap242x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
- omap2420_hwmod_init();
- } else if (cpu_is_omap243x()) {
- omap2xxx_powerdomains_init();
- omap2xxx_clockdomains_init();
- omap2430_hwmod_init();
- } else if (cpu_is_omap34xx()) {
- omap3xxx_powerdomains_init();
- omap3xxx_clockdomains_init();
- omap3xxx_hwmod_init();
- } else if (cpu_is_omap44xx()) {
- omap44xx_powerdomains_init();
- omap44xx_clockdomains_init();
- omap44xx_hwmod_init();
- } else {
- pr_err("Could not init hwmod data - unknown SoC\n");
- }
-
/* Set the default postsetup state for all hwmods */
#ifdef CONFIG_PM_RUNTIME
postsetup_state = _HWMOD_STATE_IDLE;
@@ -376,7 +346,7 @@
* omap_hwmod_late_init(), so boards that desire full watchdog
* coverage of kernel initialization can reprogram the
* postsetup_state between the calls to
- * omap2_init_common_infra() and omap2_init_common_devices().
+ * omap2_init_common_infra() and omap_sdrc_init().
*
* XXX ideally we could detect whether the MPU WDT was currently
* enabled here and make this conditional
@@ -387,27 +357,101 @@
&postsetup_state);
omap_pm_if_early_init();
-
- if (cpu_is_omap2420())
- omap2420_clk_init();
- else if (cpu_is_omap2430())
- omap2430_clk_init();
- else if (cpu_is_omap34xx())
- omap3xxx_clk_init();
- else if (cpu_is_omap44xx())
- omap4xxx_clk_init();
- else
- pr_err("Could not init clock framework - unknown SoC\n");
}
-void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+void __init omap2420_init_early(void)
+{
+ omap2_set_globals_242x();
+ omap_common_init_early();
+ omap2xxx_voltagedomains_init();
+ omap242x_powerdomains_init();
+ omap242x_clockdomains_init();
+ omap2420_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap2420_clk_init();
+}
+
+void __init omap2430_init_early(void)
+{
+ omap2_set_globals_243x();
+ omap_common_init_early();
+ omap2xxx_voltagedomains_init();
+ omap243x_powerdomains_init();
+ omap243x_clockdomains_init();
+ omap2430_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap2430_clk_init();
+}
+
+/*
+ * Currently only board-omap3beagle.c should call this because of the
+ * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
+ */
+void __init omap3_init_early(void)
+{
+ omap2_set_globals_3xxx();
+ omap_common_init_early();
+ omap3xxx_voltagedomains_init();
+ omap3xxx_powerdomains_init();
+ omap3xxx_clockdomains_init();
+ omap3xxx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap3xxx_clk_init();
+}
+
+void __init omap3430_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init omap35xx_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init omap3630_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init am35xx_init_early(void)
+{
+ omap3_init_early();
+}
+
+void __init ti816x_init_early(void)
+{
+ omap2_set_globals_ti816x();
+ omap_common_init_early();
+ omap3xxx_voltagedomains_init();
+ omap3xxx_powerdomains_init();
+ omap3xxx_clockdomains_init();
+ omap3xxx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap3xxx_clk_init();
+}
+
+void __init omap4430_init_early(void)
+{
+ omap2_set_globals_443x();
+ omap_common_init_early();
+ omap44xx_voltagedomains_init();
+ omap44xx_powerdomains_init();
+ omap44xx_clockdomains_init();
+ omap44xx_hwmod_init();
+ omap_hwmod_init_postsetup();
+ omap4xxx_clk_init();
+}
+
+void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
+ omap_sram_init();
+
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
-
}
/*
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
index fd230c6..e69de29 100644
--- a/arch/arm/mach-omap2/io.h
+++ b/arch/arm/mach-omap2/io.h
@@ -1,7 +0,0 @@
-
-#ifndef __MACH_OMAP2_IO_H__
-#define __MACH_OMAP2_IO_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __MACH_OMAP2_IO_H__ */
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 3a12f75..65f1be6 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -165,8 +165,8 @@
omap_irq_bank_init_one(bank);
- for (i = 0, j = 0; i < bank->nr_irqs; i += 32, j += 0x20)
- omap_alloc_gc(bank->base_reg + j, i, 32);
+ for (j = 0; j < bank->nr_irqs; j += 32)
+ omap_alloc_gc(bank->base_reg + j, j, 32);
nr_of_irqs += bank->nr_irqs;
nr_banks++;
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 4a6ef6a..292eee3 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -27,66 +27,69 @@
#include "control.h"
-/* McBSP internal signal muxing functions */
+/*
+ * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
+ * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
+ */
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-34xx.h"
-void omap2_mcbsp1_mux_clkr_src(u8 mux)
+/* McBSP internal signal muxing function */
+static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
+ const char *src)
{
u32 v;
v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == CLKR_SRC_CLKR)
- v &= ~OMAP2_MCBSP1_CLKR_MASK;
- else if (mux == CLKR_SRC_CLKX)
- v |= OMAP2_MCBSP1_CLKR_MASK;
- omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
-void omap2_mcbsp1_mux_fsr_src(u8 mux)
-{
- u32 v;
+ if (!strcmp(signal, "clkr")) {
+ if (!strcmp(src, "clkr"))
+ v &= ~OMAP2_MCBSP1_CLKR_MASK;
+ else if (!strcmp(src, "clkx"))
+ v |= OMAP2_MCBSP1_CLKR_MASK;
+ else
+ return -EINVAL;
+ } else if (!strcmp(signal, "fsr")) {
+ if (!strcmp(src, "fsr"))
+ v &= ~OMAP2_MCBSP1_FSR_MASK;
+ else if (!strcmp(src, "fsx"))
+ v |= OMAP2_MCBSP1_FSR_MASK;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
- v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- if (mux == FSR_SRC_FSR)
- v &= ~OMAP2_MCBSP1_FSR_MASK;
- else if (mux == FSR_SRC_FSX)
- v |= OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+
+ return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
/* McBSP CLKS source switching function */
-
-int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
+ const char *src)
{
- struct omap_mcbsp *mcbsp;
struct clk *fck_src;
char *fck_src_name;
int r;
- if (!omap_mcbsp_check_valid_id(id)) {
- pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
- return -EINVAL;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ if (!strcmp(src, "clks_ext"))
fck_src_name = "pad_fck";
- else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ else if (!strcmp(src, "clks_fclk"))
fck_src_name = "prcm_fck";
else
return -EINVAL;
- fck_src = clk_get(mcbsp->dev, fck_src_name);
+ fck_src = clk_get(dev, fck_src_name);
if (IS_ERR_OR_NULL(fck_src)) {
pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
fck_src_name);
return -EINVAL;
}
- pm_runtime_put_sync(mcbsp->dev);
+ pm_runtime_put_sync(dev);
- r = clk_set_parent(mcbsp->fclk, fck_src);
+ r = clk_set_parent(clk, fck_src);
if (IS_ERR_VALUE(r)) {
pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
"clks", fck_src_name);
@@ -94,21 +97,30 @@
return -EINVAL;
}
- pm_runtime_get_sync(mcbsp->dev);
+ pm_runtime_get_sync(dev);
clk_put(fck_src);
return 0;
}
-EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
+static int omap3_enable_st_clock(unsigned int id, bool enable)
+{
+ unsigned int w;
+
+ /*
+ * Sidetone uses McBSP ICLK - which must not idle when sidetones
+ * are enabled or sidetones start sounding ugly.
+ */
+ w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (enable)
+ w &= ~(1 << (id - 2));
+ else
+ w |= 1 << (id - 2);
+ omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+ return 0;
+}
static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
{
@@ -116,7 +128,7 @@
char *name = "omap-mcbsp";
struct omap_hwmod *oh_device[2];
struct omap_mcbsp_platform_data *pdata = NULL;
- struct omap_device *od;
+ struct platform_device *pdev;
sscanf(oh->name, "mcbsp%d", &id);
@@ -126,7 +138,13 @@
return -ENOMEM;
}
- pdata->mcbsp_config_type = oh->class->rev;
+ pdata->reg_step = 4;
+ if (oh->class->rev < MCBSP_CONFIG_TYPE2) {
+ pdata->reg_size = 2;
+ } else {
+ pdata->reg_size = 4;
+ pdata->has_ccr = true;
+ }
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -137,22 +155,28 @@
pdata->buffer_size = 0x80;
}
+ if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
+ pdata->has_wakeup = true;
+
oh_device[0] = oh;
if (oh->dev_attr) {
oh_device[1] = omap_hwmod_lookup((
(struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone);
+ pdata->enable_st_clock = omap3_enable_st_clock;
count++;
}
- od = omap_device_build_ss(name, id, oh_device, count, pdata,
- sizeof(*pdata), omap2_mcbsp_latency,
- ARRAY_SIZE(omap2_mcbsp_latency), false);
+ pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
+ sizeof(*pdata), NULL, 0, false);
kfree(pdata);
- if (IS_ERR(od)) {
+ if (IS_ERR(pdev)) {
pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
name, oh->name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 889464d..4412ddb 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -102,8 +102,11 @@
{
unsigned int i, ncores;
- /* Never released */
- scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
+ /*
+ * Currently we can't call ioremap here because
+ * SoC detection won't work until after init_early.
+ */
+ scu_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_SCU_BASE);
BUG_ON(!scu_base);
ncores = scu_get_core_count(scu_base);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 84cc0bd..d713807 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1954,9 +1954,6 @@
i = 0;
do {
- if (!omap_chip_is(ohs[i]->omap_chip))
- continue;
-
r = _register(ohs[i]);
WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
r);
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a015c69..6d72062 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -100,7 +100,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters),
.slaves = omap2420_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -206,7 +205,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
.slaves = omap2420_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -227,7 +225,6 @@
.masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
.slaves = omap2420_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -243,7 +240,6 @@
.main_clk = "mpu_ck",
.masters = omap2420_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -271,7 +267,16 @@
.class = &iva_hwmod_class,
.masters = omap2420_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2420_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -314,10 +319,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer2 */
@@ -351,10 +356,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer3 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer4 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer5 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
@@ -500,10 +505,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer7 */
@@ -537,10 +542,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer8 */
@@ -574,10 +579,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2420_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer9 */
@@ -611,10 +616,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer10 */
@@ -648,10 +653,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer11 */
@@ -685,10 +690,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* timer12 */
@@ -722,10 +727,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2420_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420)
};
/* l4_wkup -> wd_timer2 */
@@ -766,7 +771,6 @@
},
.slaves = omap2420_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART1 */
@@ -792,7 +796,6 @@
.slaves = omap2420_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART2 */
@@ -818,7 +821,6 @@
.slaves = omap2420_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* UART3 */
@@ -844,7 +846,6 @@
.slaves = omap2420_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dss */
@@ -898,7 +899,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
.masters = omap2420_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -938,7 +938,6 @@
},
.slaves = omap2420_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -975,7 +974,6 @@
},
.slaves = omap2420_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1013,7 +1011,6 @@
},
.slaves = omap2420_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1064,7 +1061,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1092,7 +1088,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
@@ -1197,7 +1192,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio2 */
@@ -1223,7 +1217,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio3 */
@@ -1249,7 +1242,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* gpio4 */
@@ -1275,7 +1267,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* dma attributes */
@@ -1322,7 +1313,6 @@
.masters = omap2420_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_NO_IDLEST,
};
@@ -1363,7 +1353,6 @@
},
.slaves = omap2420_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi1 */
@@ -1393,7 +1382,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcspi2 */
@@ -1423,7 +1411,6 @@
.slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/*
@@ -1473,7 +1460,6 @@
},
.slaves = omap2420_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* mcbsp2 */
@@ -1514,7 +1500,6 @@
},
.slaves = omap2420_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 408193d..a2580d0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -110,7 +110,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters),
.slaves = omap2430_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -250,7 +249,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
.slaves = omap2430_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -301,7 +299,6 @@
.masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
.slaves = omap2430_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -317,7 +314,6 @@
.main_clk = "mpu_ck",
.masters = omap2430_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -345,7 +341,16 @@
.class = &iva_hwmod_class,
.masters = omap2430_iva_masters,
.masters_cnt = ARRAY_SIZE(omap2430_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
/* timer1 */
@@ -388,10 +393,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer2 */
@@ -425,10 +430,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer3 */
@@ -462,10 +467,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer4 */
@@ -499,10 +504,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer5 */
@@ -536,10 +541,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer6 */
@@ -573,10 +578,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer7 */
@@ -610,10 +615,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer8 */
@@ -647,10 +652,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap2430_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer9 */
@@ -684,10 +689,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer10 */
@@ -721,10 +726,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer11 */
@@ -758,10 +763,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* timer12 */
@@ -795,10 +800,10 @@
.idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap2430_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves),
.class = &omap2xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/* l4_wkup -> wd_timer2 */
@@ -839,7 +844,6 @@
},
.slaves = omap2430_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART1 */
@@ -865,7 +869,6 @@
.slaves = omap2430_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART2 */
@@ -891,7 +894,6 @@
.slaves = omap2430_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* UART3 */
@@ -917,7 +919,6 @@
.slaves = omap2430_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dss */
@@ -965,7 +966,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
.masters = omap2430_dss_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -999,7 +999,6 @@
},
.slaves = omap2430_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1030,7 +1029,6 @@
},
.slaves = omap2430_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1062,7 +1060,6 @@
},
.slaves = omap2430_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1123,7 +1120,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* I2C2 */
@@ -1151,7 +1147,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* l4_wkup -> gpio1 */
@@ -1273,7 +1268,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio2 */
@@ -1299,7 +1293,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio3 */
@@ -1325,7 +1318,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio4 */
@@ -1351,7 +1343,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* gpio5 */
@@ -1382,7 +1373,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves),
.class = &omap2xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* dma attributes */
@@ -1429,7 +1419,6 @@
.masters = omap2430_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.flags = HWMOD_NO_IDLEST,
};
@@ -1469,7 +1458,6 @@
},
.slaves = omap2430_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi1 */
@@ -1499,7 +1487,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi2 */
@@ -1529,7 +1516,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcspi3 */
@@ -1572,7 +1558,6 @@
.slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves),
.class = &omap2xxx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/*
@@ -1628,7 +1613,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430)
};
/*
@@ -1689,7 +1673,6 @@
},
.slaves = omap2430_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp2 */
@@ -1731,7 +1714,6 @@
},
.slaves = omap2430_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp3 */
@@ -1783,7 +1765,6 @@
},
.slaves = omap2430_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp4 */
@@ -1841,7 +1822,6 @@
},
.slaves = omap2430_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* mcbsp5 */
@@ -1899,7 +1879,6 @@
},
.slaves = omap2430_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO common */
@@ -1966,7 +1945,6 @@
.slaves = omap2430_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* MMC/SD/SDIO2 */
@@ -2010,7 +1988,6 @@
.slaves = omap2430_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves),
.class = &omap2430_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 25bf43b..3008e16 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -156,7 +156,6 @@
.masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters),
.slaves = omap3xxx_l3_main_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -459,7 +458,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -474,7 +472,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -489,7 +486,6 @@
.class = &l4_hwmod_class,
.slaves = omap3xxx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -505,7 +501,6 @@
.main_clk = "arm_fck",
.masters = omap3xxx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -533,7 +528,6 @@
.class = &iva_hwmod_class,
.masters = omap3xxx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer class */
@@ -570,6 +564,21 @@
.rev = OMAP_TIMER_IP_VERSION_1,
};
+/* secure timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
+ .timer_capability = OMAP_TIMER_SECURE,
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap3xxx_timer1_hwmod;
@@ -610,10 +619,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer2 */
@@ -656,10 +665,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer3 */
@@ -702,10 +711,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer4 */
@@ -748,10 +757,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer5 */
@@ -794,10 +803,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer6 */
@@ -840,10 +849,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer7 */
@@ -886,10 +895,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap3xxx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer8 */
@@ -932,10 +941,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer9 */
@@ -978,10 +987,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer10 */
@@ -1015,10 +1024,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves),
.class = &omap3xxx_timer_1ms_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer11 */
@@ -1052,10 +1061,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap3xxx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* timer12*/
@@ -1102,10 +1111,10 @@
.idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
},
},
+ .dev_attr = &capability_secure_dev_attr,
.slaves = omap3xxx_timer12_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves),
.class = &omap3xxx_timer_hwmod_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* l4_wkup -> wd_timer2 */
@@ -1182,7 +1191,6 @@
},
.slaves = omap3xxx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
/*
* XXX: Use software supervised mode, HW supervised smartidle seems to
* block CORE power domain idle transitions. Maybe a HW bug in wdt2?
@@ -1213,7 +1221,6 @@
.slaves = omap3xxx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART2 */
@@ -1239,7 +1246,6 @@
.slaves = omap3xxx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART3 */
@@ -1265,7 +1271,6 @@
.slaves = omap3xxx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* UART4 */
@@ -1302,7 +1307,6 @@
.slaves = omap3xxx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves),
.class = &omap2_uart_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
static struct omap_hwmod_class i2c_class = {
@@ -1390,7 +1394,6 @@
.slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1415,8 +1418,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves),
.masters = omap3xxx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2 |
- CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1),
};
/* l4_core -> dss_dispc */
@@ -1454,9 +1455,6 @@
},
.slaves = omap3xxx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1518,9 +1516,6 @@
},
.slaves = omap3xxx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1558,9 +1553,6 @@
},
.slaves = omap3xxx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1599,9 +1591,6 @@
},
.slaves = omap3xxx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_GE_OMAP3430ES2 | CHIP_IS_OMAP3630ES1 |
- CHIP_GE_OMAP3630ES1_1),
.flags = HWMOD_NO_IDLEST,
};
@@ -1637,7 +1626,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C2 */
@@ -1672,7 +1660,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C3 */
@@ -1718,7 +1705,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
.class = &i2c_class,
.dev_attr = &i2c3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4_wkup -> gpio1 */
@@ -1880,7 +1866,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio2 */
@@ -1912,7 +1897,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio3 */
@@ -1944,7 +1928,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio4 */
@@ -1976,7 +1959,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio5 */
@@ -2013,7 +1995,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* gpio6 */
@@ -2050,7 +2031,6 @@
.slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves),
.class = &omap3xxx_gpio_hwmod_class,
.dev_attr = &gpio_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* dma_system -> L3 */
@@ -2134,7 +2114,6 @@
.masters = omap3xxx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters),
.dev_attr = &dma_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.flags = HWMOD_NO_IDLEST,
};
@@ -2207,7 +2186,6 @@
},
.slaves = omap3xxx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp2 */
@@ -2264,7 +2242,6 @@
.slaves = omap3xxx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
.dev_attr = &omap34xx_mcbsp2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3 */
@@ -2321,7 +2298,6 @@
.slaves = omap3xxx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
.dev_attr = &omap34xx_mcbsp3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp4 */
@@ -2379,7 +2355,6 @@
},
.slaves = omap3xxx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp5 */
@@ -2437,7 +2412,6 @@
},
.slaves = omap3xxx_mcbsp5_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* 'mcbsp sidetone' class */
@@ -2498,7 +2472,6 @@
},
.slaves = omap3xxx_mcbsp2_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcbsp3_sidetone */
@@ -2547,7 +2520,6 @@
},
.slaves = omap3xxx_mcbsp3_sidetone_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
@@ -2597,7 +2569,7 @@
.name = "sr1_hwmod",
.class = &omap34xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2609,9 +2581,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2619,7 +2588,7 @@
.name = "sr1_hwmod",
.class = &omap36xx_smartreflex_hwmod_class,
.main_clk = "sr1_fck",
- .vdd_name = "mpu",
+ .vdd_name = "mpu_iva",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
@@ -2631,7 +2600,6 @@
},
.slaves = omap3_sr1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/* SR2 */
@@ -2655,9 +2623,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3430ES3_1),
.flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
@@ -2677,7 +2642,6 @@
},
.slaves = omap3_sr2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
/*
@@ -2745,7 +2709,6 @@
},
.slaves = omap3xxx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* l4 core -> mcspi1 interface */
@@ -2843,7 +2806,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi1_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi2 */
@@ -2873,7 +2835,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi2_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* mcspi3 */
@@ -2916,7 +2877,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi3_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* SPI4 */
@@ -2957,7 +2917,6 @@
.slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves),
.class = &omap34xx_mcspi_class,
.dev_attr = &omap_mcspi4_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/*
@@ -3014,7 +2973,6 @@
*/
.flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
| HWMOD_SWSUP_MSTANDBY,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430)
};
/* usb_otg_hs */
@@ -3042,7 +3000,6 @@
.slaves = am35xx_usbhsotg_slaves,
.slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves),
.class = &am35xx_usbotg_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1)
};
/* MMC/SD/SDIO common */
@@ -3108,7 +3065,6 @@
.slaves = omap3xxx_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO2 */
@@ -3151,7 +3107,6 @@
.slaves = omap3xxx_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* MMC/SD/SDIO3 */
@@ -3193,7 +3148,6 @@
.slaves = omap3xxx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves),
.class = &omap34xx_mmc_class,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
@@ -3224,10 +3178,7 @@
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
- &omap3xxx_uart4_hwmod,
/* dss class */
- &omap3430es1_dss_core_hwmod,
- &omap3xxx_dss_core_hwmod,
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
&omap3xxx_dss_rfbi_hwmod,
@@ -3239,9 +3190,6 @@
&omap3xxx_i2c3_hwmod,
&omap34xx_sr1_hwmod,
&omap34xx_sr2_hwmod,
- &omap36xx_sr1_hwmod,
- &omap36xx_sr2_hwmod,
-
/* gpio class */
&omap3xxx_gpio1_hwmod,
@@ -3272,16 +3220,96 @@
&omap34xx_mcspi3,
&omap34xx_mcspi4,
- /* usbotg class */
- &omap3xxx_usbhsotg_hwmod,
-
- /* usbotg for am35x */
- &am35xx_usbhsotg_hwmod,
-
NULL,
};
+/* 3430ES1-only hwmods */
+static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
+ &omap3430es1_dss_core_hwmod,
+ NULL
+};
+
+/* 3430ES2+-only hwmods */
+static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
+ &omap3xxx_dss_core_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+/* 34xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
+ &omap34xx_sr1_hwmod,
+ &omap34xx_sr2_hwmod,
+ NULL
+};
+
+/* 36xx-only hwmods (all ES revisions) */
+static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
+ &omap3xxx_uart4_hwmod,
+ &omap3xxx_dss_core_hwmod,
+ &omap36xx_sr1_hwmod,
+ &omap36xx_sr2_hwmod,
+ &omap3xxx_usbhsotg_hwmod,
+ NULL
+};
+
+static __initdata struct omap_hwmod *am35xx_hwmods[] = {
+ &omap3xxx_dss_core_hwmod, /* XXX ??? */
+ &am35xx_usbhsotg_hwmod,
+ NULL
+};
+
int __init omap3xxx_hwmod_init(void)
{
- return omap_hwmod_register(omap3xxx_hwmods);
+ int r;
+ struct omap_hwmod **h = NULL;
+ unsigned int rev;
+
+ /* Register hwmods common to all OMAP3 */
+ r = omap_hwmod_register(omap3xxx_hwmods);
+ if (!r)
+ return r;
+
+ rev = omap_rev();
+
+ /*
+ * Register hwmods common to individual OMAP3 families, all
+ * silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
+ * All possible revisions should be included in this conditional.
+ */
+ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+ rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
+ rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
+ h = omap34xx_hwmods;
+ } else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
+ h = am35xx_hwmods;
+ } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_2) {
+ h = omap36xx_hwmods;
+ } else {
+ WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
+ return -EINVAL;
+ };
+
+ r = omap_hwmod_register(h);
+ if (!r)
+ return r;
+
+ /*
+ * Register hwmods specific to certain ES levels of a
+ * particular family of silicon (e.g., 34xx ES1.0)
+ */
+ h = NULL;
+ if (rev == OMAP3430_REV_ES1_0) {
+ h = omap3430es1_hwmods;
+ } else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+ rev == OMAP3430_REV_ES3_1_2) {
+ h = omap3430es2plus_hwmods;
+ };
+
+ if (h)
+ r = omap_hwmod_register(h);
+
+ return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 79325c6..7695e5d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -29,6 +29,7 @@
#include <plat/mcbsp.h>
#include <plat/mmc.h>
#include <plat/i2c.h>
+#include <plat/dmtimer.h>
#include "omap_hwmod_common_data.h"
@@ -133,7 +134,6 @@
.slaves = omap44xx_dmm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
.mpu_irqs = omap44xx_dmm_irqs,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -189,7 +189,6 @@
},
.slaves = omap44xx_emif_fw_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -236,7 +235,6 @@
},
.slaves = omap44xx_l3_instr_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_1 */
@@ -336,7 +334,6 @@
},
.slaves = omap44xx_l3_main_1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_2 */
@@ -438,7 +435,6 @@
},
.slaves = omap44xx_l3_main_2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l3_main_3 */
@@ -496,7 +492,6 @@
},
.slaves = omap44xx_l3_main_3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -559,7 +554,6 @@
},
.slaves = omap44xx_l4_abe_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_cfg */
@@ -588,7 +582,6 @@
},
.slaves = omap44xx_l4_cfg_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_per */
@@ -617,7 +610,6 @@
},
.slaves = omap44xx_l4_per_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* l4_wkup */
@@ -646,7 +638,6 @@
},
.slaves = omap44xx_l4_wkup_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -677,7 +668,6 @@
.clkdm_name = "mpuss_clkdm",
.slaves = omap44xx_mpu_private_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -828,7 +818,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves),
.masters = omap44xx_aess_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_aess_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -856,7 +845,6 @@
},
.opt_clks = bandgap_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -917,7 +905,6 @@
},
.slaves = omap44xx_counter_32k_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1005,7 +992,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
.masters = omap44xx_dma_system_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1098,7 +1084,6 @@
},
.slaves = omap44xx_dmic_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1164,7 +1149,6 @@
.rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_dsp_hwmod = {
@@ -1187,7 +1171,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves),
.masters = omap44xx_dsp_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1278,7 +1261,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves),
.masters = omap44xx_dss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_dss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1381,7 +1363,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.slaves = omap44xx_dss_dispc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1480,7 +1461,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
.slaves = omap44xx_dss_dsi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* dss_dsi2 */
@@ -1558,7 +1538,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
.slaves = omap44xx_dss_dsi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1656,7 +1635,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
.slaves = omap44xx_dss_hdmi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1748,7 +1726,6 @@
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
.slaves = omap44xx_dss_rfbi_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1817,7 +1794,6 @@
},
.slaves = omap44xx_dss_venc_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -1901,7 +1877,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio2 */
@@ -1957,7 +1932,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio3 */
@@ -2013,7 +1987,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio4 */
@@ -2069,7 +2042,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio5 */
@@ -2125,7 +2097,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* gpio6 */
@@ -2181,7 +2152,6 @@
.dev_attr = &gpio_dev_attr,
.slaves = omap44xx_gpio6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2261,7 +2231,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves),
.masters = omap44xx_hsi_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2345,7 +2314,6 @@
.slaves = omap44xx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c2 */
@@ -2402,7 +2370,6 @@
.slaves = omap44xx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c3 */
@@ -2459,7 +2426,6 @@
.slaves = omap44xx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* i2c4 */
@@ -2516,7 +2482,6 @@
.slaves = omap44xx_i2c4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
.dev_attr = &i2c_dev_attr,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2577,7 +2542,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2593,7 +2557,6 @@
.rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_ipu_hwmod = {
@@ -2616,7 +2579,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves),
.masters = omap44xx_ipu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2706,7 +2668,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves),
.masters = omap44xx_iss_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iss_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2781,7 +2742,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* Pseudo hwmod for reset control purpose only */
@@ -2797,7 +2757,6 @@
.rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
},
},
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct omap_hwmod omap44xx_iva_hwmod = {
@@ -2820,7 +2779,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves),
.masters = omap44xx_iva_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_iva_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2890,7 +2848,6 @@
},
.slaves = omap44xx_kbd_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -2956,7 +2913,6 @@
},
.slaves = omap44xx_mailbox_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3051,7 +3007,6 @@
},
.slaves = omap44xx_mcbsp1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp2 */
@@ -3127,7 +3082,6 @@
},
.slaves = omap44xx_mcbsp2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp3 */
@@ -3203,7 +3157,6 @@
},
.slaves = omap44xx_mcbsp3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcbsp4 */
@@ -3258,7 +3211,6 @@
},
.slaves = omap44xx_mcbsp4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3353,7 +3305,6 @@
},
.slaves = omap44xx_mcpdm_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3442,7 +3393,6 @@
.dev_attr = &mcspi1_dev_attr,
.slaves = omap44xx_mcspi1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi2 */
@@ -3505,7 +3455,6 @@
.dev_attr = &mcspi2_dev_attr,
.slaves = omap44xx_mcspi2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi3 */
@@ -3568,7 +3517,6 @@
.dev_attr = &mcspi3_dev_attr,
.slaves = omap44xx_mcspi3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mcspi4 */
@@ -3629,7 +3577,6 @@
.dev_attr = &mcspi4_dev_attr,
.slaves = omap44xx_mcspi4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3718,7 +3665,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves),
.masters = omap44xx_mmc1_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc2 */
@@ -3779,7 +3725,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves),
.masters = omap44xx_mmc2_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc3 */
@@ -3834,7 +3779,6 @@
},
.slaves = omap44xx_mmc3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc4 */
@@ -3890,7 +3834,6 @@
},
.slaves = omap44xx_mmc4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* mmc5 */
@@ -3945,7 +3888,6 @@
},
.slaves = omap44xx_mmc5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -3987,7 +3929,6 @@
},
.masters = omap44xx_mpu_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4063,7 +4004,6 @@
},
.slaves = omap44xx_smartreflex_core_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_iva */
@@ -4112,7 +4052,6 @@
},
.slaves = omap44xx_smartreflex_iva_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* smartreflex_mpu */
@@ -4161,7 +4100,6 @@
},
.slaves = omap44xx_smartreflex_mpu_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4224,7 +4162,6 @@
},
.slaves = omap44xx_spinlock_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4265,6 +4202,16 @@
.sysc = &omap44xx_timer_sysc,
};
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
/* timer1 */
static struct omap_hwmod omap44xx_timer1_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
@@ -4308,9 +4255,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer2 */
@@ -4356,9 +4303,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer3 */
@@ -4404,9 +4351,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer4 */
@@ -4452,9 +4399,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer5 */
@@ -4519,9 +4466,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer5_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer6 */
@@ -4587,9 +4534,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer6_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer7 */
@@ -4654,9 +4601,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_alwon_dev_attr,
.slaves = omap44xx_timer7_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer8 */
@@ -4721,9 +4668,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer8_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer9 */
@@ -4769,9 +4716,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer9_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer10 */
@@ -4817,9 +4764,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer10_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* timer11 */
@@ -4865,9 +4812,9 @@
.modulemode = MODULEMODE_SWCTRL,
},
},
+ .dev_attr = &capability_pwm_dev_attr,
.slaves = omap44xx_timer11_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -4944,7 +4891,6 @@
},
.slaves = omap44xx_uart1_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart2 */
@@ -4999,7 +4945,6 @@
},
.slaves = omap44xx_uart2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart3 */
@@ -5055,7 +5000,6 @@
},
.slaves = omap44xx_uart3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* uart4 */
@@ -5110,7 +5054,6 @@
},
.slaves = omap44xx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5195,7 +5138,6 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
.masters = omap44xx_usb_otg_hs_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/*
@@ -5266,7 +5208,6 @@
},
.slaves = omap44xx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* wd_timer3 */
@@ -5333,7 +5274,6 @@
},
.slaves = omap44xx_wd_timer3_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c
index 7b9f190..c8b1bef 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.c
+++ b/arch/arm/mach-omap2/omap_l3_noc.c
@@ -1,25 +1,25 @@
/*
- * OMAP4XXX L3 Interconnect error handling driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+ * OMAP4XXX L3 Interconnect error handling driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/init.h>
#include <linux/io.h>
#include <linux/platform_device.h>
@@ -55,12 +55,12 @@
static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
{
- struct omap4_l3 *l3 = _l3;
- int inttype, i, j;
+ struct omap4_l3 *l3 = _l3;
+ int inttype, i, k;
int err_src = 0;
- u32 std_err_main_addr, std_err_main, err_reg;
- u32 base, slave_addr, clear;
- char *source_name;
+ u32 std_err_main, err_reg, clear, masterid;
+ void __iomem *base, *l3_targ_base;
+ char *target_name, *master_name = "UN IDENTIFIED";
/* Get the Type of interrupt */
inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
@@ -70,43 +70,50 @@
* Read the regerr register of the clock domain
* to determine the source
*/
- base = (u32)l3->l3_base[i];
- err_reg = readl(base + l3_flagmux[i] + (inttype << 3));
+ base = l3->l3_base[i];
+ err_reg = __raw_readl(base + l3_flagmux[i] +
+ + L3_FLAGMUX_REGERR0 + (inttype << 3));
/* Get the corresponding error and analyse */
if (err_reg) {
/* Identify the source from control status register */
- for (j = 0; !(err_reg & (1 << j)); j++)
- ;
+ err_src = __ffs(err_reg);
- err_src = j;
/* Read the stderrlog_main_source from clk domain */
- std_err_main_addr = base + *(l3_targ[i] + err_src);
- std_err_main = readl(std_err_main_addr);
+ l3_targ_base = base + *(l3_targ[i] + err_src);
+ std_err_main = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
+ masterid = __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_MSTADDR);
switch (std_err_main & CUSTOM_ERROR) {
case STANDARD_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- slave_addr = std_err_main_addr +
- L3_SLAVE_ADDRESS_OFFSET;
- WARN(true, "L3 standard error: SOURCE:%s at address 0x%x\n",
- source_name, readl(slave_addr));
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ WARN(true, "L3 standard error: TARGET:%s at address 0x%x\n",
+ target_name,
+ __raw_readl(l3_targ_base +
+ L3_TARG_STDERRLOG_SLVOFSLSB));
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
case CUSTOM_ERROR:
- source_name =
- l3_targ_stderrlog_main_name[i][err_src];
-
- WARN(true, "CUSTOM SRESP error with SOURCE:%s\n",
- source_name);
+ target_name =
+ l3_targ_inst_name[i][err_src];
+ for (k = 0; k < NUM_OF_L3_MASTERS; k++) {
+ if (masterid == l3_masters[k].id)
+ master_name =
+ l3_masters[k].name;
+ }
+ WARN(true, "L3 custom error: MASTER:%s TARGET:%s\n",
+ master_name, target_name);
/* clear the std error log*/
clear = std_err_main | CLEAR_STDERR_LOG;
- writel(clear, std_err_main_addr);
+ writel(clear, l3_targ_base +
+ L3_TARG_STDERRLOG_MAIN);
break;
default:
@@ -120,12 +127,11 @@
return IRQ_HANDLED;
}
-static int __init omap4_l3_probe(struct platform_device *pdev)
+static int __devinit omap4_l3_probe(struct platform_device *pdev)
{
- static struct omap4_l3 *l3;
- struct resource *res;
- int ret;
- int irq;
+ static struct omap4_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
@@ -177,27 +183,25 @@
/*
* Setup interrupt Handlers
*/
- irq = platform_get_irq(pdev, 0);
- ret = request_irq(irq,
+ l3->debug_irq = platform_get_irq(pdev, 0);
+ ret = request_irq(l3->debug_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-dbg-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_DBG);
+ OMAP44XX_IRQ_L3_DBG);
goto err3;
}
- l3->debug_irq = irq;
- irq = platform_get_irq(pdev, 1);
- ret = request_irq(irq,
+ l3->app_irq = platform_get_irq(pdev, 1);
+ ret = request_irq(l3->app_irq,
l3_interrupt_handler,
IRQF_DISABLED, "l3-app-irq", l3);
if (ret) {
pr_crit("L3: request_irq failed to register for 0x%x\n",
- OMAP44XX_IRQ_L3_APP);
+ OMAP44XX_IRQ_L3_APP);
goto err4;
}
- l3->app_irq = irq;
return 0;
@@ -214,9 +218,9 @@
return ret;
}
-static int __exit omap4_l3_remove(struct platform_device *pdev)
+static int __devexit omap4_l3_remove(struct platform_device *pdev)
{
- struct omap4_l3 *l3 = platform_get_drvdata(pdev);
+ struct omap4_l3 *l3 = platform_get_drvdata(pdev);
free_irq(l3->app_irq, l3);
free_irq(l3->debug_irq, l3);
@@ -228,16 +232,29 @@
return 0;
}
+#if defined(CONFIG_OF)
+static const struct of_device_id l3_noc_match[] = {
+ {.compatible = "ti,omap4-l3-noc", },
+ {},
+}
+MODULE_DEVICE_TABLE(of, l3_noc_match);
+#else
+#define l3_noc_match NULL
+#endif
+
static struct platform_driver omap4_l3_driver = {
- .remove = __exit_p(omap4_l3_remove),
+ .probe = omap4_l3_probe,
+ .remove = __devexit_p(omap4_l3_remove),
.driver = {
- .name = "omap_l3_noc",
+ .name = "omap_l3_noc",
+ .owner = THIS_MODULE,
+ .of_match_table = l3_noc_match,
},
};
static int __init omap4_l3_init(void)
{
- return platform_driver_probe(&omap4_l3_driver, omap4_l3_probe);
+ return platform_driver_register(&omap4_l3_driver);
}
postcore_initcall_sync(omap4_l3_init);
diff --git a/arch/arm/mach-omap2/omap_l3_noc.h b/arch/arm/mach-omap2/omap_l3_noc.h
index 359b833..90b5098 100644
--- a/arch/arm/mach-omap2/omap_l3_noc.h
+++ b/arch/arm/mach-omap2/omap_l3_noc.h
@@ -1,132 +1,162 @@
- /*
- * OMAP4XXX L3 Interconnect error handling driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP4XXX L3 Interconnect error handling driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
-/*
- * L3 register offsets
- */
#define L3_MODULES 3
#define CLEAR_STDERR_LOG (1 << 31)
#define CUSTOM_ERROR 0x2
#define STANDARD_ERROR 0x0
#define INBAND_ERROR 0x0
-#define EMIF_KERRLOG_OFFSET 0x10
-#define L3_SLAVE_ADDRESS_OFFSET 0x14
-#define LOGICAL_ADDR_ERRORLOG 0x4
#define L3_APPLICATION_ERROR 0x0
#define L3_DEBUG_ERROR 0x1
-u32 l3_flagmux[L3_MODULES] = {
- 0x50C,
- 0x100C,
- 0X020C
+/* L3 TARG register offsets */
+#define L3_TARG_STDERRLOG_MAIN 0x48
+#define L3_TARG_STDERRLOG_SLVOFSLSB 0x5c
+#define L3_TARG_STDERRLOG_MSTADDR 0x68
+#define L3_FLAGMUX_REGERR0 0xc
+
+#define NUM_OF_L3_MASTERS (sizeof(l3_masters)/sizeof(l3_masters[0]))
+
+static u32 l3_flagmux[L3_MODULES] = {
+ 0x500,
+ 0x1000,
+ 0X0200
};
-/*
- * L3 Target standard Error register offsets
- */
-u32 l3_targ_stderrlog_main_clk1[] = {
- 0x148, /* DMM1 */
- 0x248, /* DMM2 */
- 0x348, /* ABE */
- 0x448, /* L4CFG */
- 0x648 /* CLK2 PWR DISC */
+/* L3 Target standard Error register offsets */
+static u32 l3_targ_inst_clk1[] = {
+ 0x100, /* DMM1 */
+ 0x200, /* DMM2 */
+ 0x300, /* ABE */
+ 0x400, /* L4CFG */
+ 0x600 /* CLK2 PWR DISC */
};
-u32 l3_targ_stderrlog_main_clk2[] = {
- 0x548, /* CORTEX M3 */
- 0x348, /* DSS */
- 0x148, /* GPMC */
- 0x448, /* ISS */
- 0x748, /* IVAHD */
- 0xD48, /* missing in TRM corresponds to AES1*/
- 0x948, /* L4 PER0*/
- 0x248, /* OCMRAM */
- 0x148, /* missing in TRM corresponds to GPMC sERROR*/
- 0x648, /* SGX */
- 0x848, /* SL2 */
- 0x1648, /* C2C */
- 0x1148, /* missing in TRM corresponds PWR DISC CLK1*/
- 0xF48, /* missing in TRM corrsponds to SHA1*/
- 0xE48, /* missing in TRM corresponds to AES2*/
- 0xC48, /* L4 PER3 */
- 0xA48, /* L4 PER1*/
- 0xB48 /* L4 PER2*/
+static u32 l3_targ_inst_clk2[] = {
+ 0x500, /* CORTEX M3 */
+ 0x300, /* DSS */
+ 0x100, /* GPMC */
+ 0x400, /* ISS */
+ 0x700, /* IVAHD */
+ 0xD00, /* missing in TRM corresponds to AES1*/
+ 0x900, /* L4 PER0*/
+ 0x200, /* OCMRAM */
+ 0x100, /* missing in TRM corresponds to GPMC sERROR*/
+ 0x600, /* SGX */
+ 0x800, /* SL2 */
+ 0x1600, /* C2C */
+ 0x1100, /* missing in TRM corresponds PWR DISC CLK1*/
+ 0xF00, /* missing in TRM corrsponds to SHA1*/
+ 0xE00, /* missing in TRM corresponds to AES2*/
+ 0xC00, /* L4 PER3 */
+ 0xA00, /* L4 PER1*/
+ 0xB00 /* L4 PER2*/
};
-u32 l3_targ_stderrlog_main_clk3[] = {
- 0x0148 /* EMUSS */
+static u32 l3_targ_inst_clk3[] = {
+ 0x0100 /* EMUSS */
};
-char *l3_targ_stderrlog_main_name[L3_MODULES][18] = {
+static struct l3_masters_data {
+ u32 id;
+ char name[10];
+} l3_masters[] = {
+ { 0x0 , "MPU"},
+ { 0x10, "CS_ADP"},
+ { 0x14, "xxx"},
+ { 0x20, "DSP"},
+ { 0x30, "IVAHD"},
+ { 0x40, "ISS"},
+ { 0x44, "DucatiM3"},
+ { 0x48, "FaceDetect"},
+ { 0x50, "SDMA_Rd"},
+ { 0x54, "SDMA_Wr"},
+ { 0x58, "xxx"},
+ { 0x5C, "xxx"},
+ { 0x60, "SGX"},
+ { 0x70, "DSS"},
+ { 0x80, "C2C"},
+ { 0x88, "xxx"},
+ { 0x8C, "xxx"},
+ { 0x90, "HSI"},
+ { 0xA0, "MMC1"},
+ { 0xA4, "MMC2"},
+ { 0xA8, "MMC6"},
+ { 0xB0, "UNIPRO1"},
+ { 0xC0, "USBHOSTHS"},
+ { 0xC4, "USBOTGHS"},
+ { 0xC8, "USBHOSTFS"}
+};
+
+static char *l3_targ_inst_name[L3_MODULES][18] = {
{
- "DMM1",
- "DMM2",
- "ABE",
- "L4CFG",
- "CLK2 PWR DISC",
+ "DMM1",
+ "DMM2",
+ "ABE",
+ "L4CFG",
+ "CLK2 PWR DISC",
},
{
- "CORTEX M3" ,
- "DSS ",
- "GPMC ",
- "ISS ",
- "IVAHD ",
- "AES1",
- "L4 PER0",
- "OCMRAM ",
- "GPMC sERROR",
- "SGX ",
- "SL2 ",
- "C2C ",
- "PWR DISC CLK1",
- "SHA1",
- "AES2",
- "L4 PER3",
- "L4 PER1",
- "L4 PER2",
+ "CORTEX M3" ,
+ "DSS ",
+ "GPMC ",
+ "ISS ",
+ "IVAHD ",
+ "AES1",
+ "L4 PER0",
+ "OCMRAM ",
+ "GPMC sERROR",
+ "SGX ",
+ "SL2 ",
+ "C2C ",
+ "PWR DISC CLK1",
+ "SHA1",
+ "AES2",
+ "L4 PER3",
+ "L4 PER1",
+ "L4 PER2",
},
{
- "EMUSS",
+ "EMUSS",
},
};
-u32 *l3_targ[L3_MODULES] = {
- l3_targ_stderrlog_main_clk1,
- l3_targ_stderrlog_main_clk2,
- l3_targ_stderrlog_main_clk3,
+static u32 *l3_targ[L3_MODULES] = {
+ l3_targ_inst_clk1,
+ l3_targ_inst_clk2,
+ l3_targ_inst_clk3,
};
struct omap4_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base */
- void __iomem *l3_base[4];
+ void __iomem *l3_base[L3_MODULES];
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
};
-
#endif
diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c
index 873c0e3..a05a62f 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.c
+++ b/arch/arm/mach-omap2/omap_l3_smx.c
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * Sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#include <linux/kernel.h>
#include <linux/slab.h>
@@ -135,7 +135,7 @@
}
}
-/**
+/*
* omap3_l3_block_irq - handles a register block's irq
* @l3: struct omap3_l3 *
* @base: register block base address
@@ -150,30 +150,29 @@
static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u64 error, int error_addr)
{
- u8 code = omap3_l3_decode_error_code(error);
- u8 initid = omap3_l3_decode_initid(error);
- u8 multi = error & L3_ERROR_LOG_MULTI;
- u32 address = omap3_l3_decode_addr(error_addr);
+ u8 code = omap3_l3_decode_error_code(error);
+ u8 initid = omap3_l3_decode_initid(error);
+ u8 multi = error & L3_ERROR_LOG_MULTI;
+ u32 address = omap3_l3_decode_addr(error_addr);
WARN(true, "%s seen by %s %s at address %x\n",
- omap3_l3_code_string(code),
- omap3_l3_initiator_string(initid),
- multi ? "Multiple Errors" : "",
- address);
+ omap3_l3_code_string(code),
+ omap3_l3_initiator_string(initid),
+ multi ? "Multiple Errors" : "", address);
return IRQ_HANDLED;
}
static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
{
- struct omap3_l3 *l3 = _l3;
- u64 status, clear;
- u64 error;
- u64 error_addr;
- u64 err_source = 0;
- void __iomem *base;
- int int_type;
- irqreturn_t ret = IRQ_NONE;
+ struct omap3_l3 *l3 = _l3;
+ u64 status, clear;
+ u64 error;
+ u64 error_addr;
+ u64 err_source = 0;
+ void __iomem *base;
+ int int_type;
+ irqreturn_t ret = IRQ_NONE;
int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
if (!int_type) {
@@ -191,14 +190,12 @@
}
/* identify the error source */
- for (err_source = 0; !(status & (1 << err_source)); err_source++)
- ;
+ err_source = __ffs(status);
- base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
+ base = l3->rt + omap3_l3_bases[int_type][err_source];
error = omap3_l3_readll(base, L3_ERROR_LOG);
if (error) {
error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR);
-
ret |= omap3_l3_block_irq(l3, error, error_addr);
}
@@ -215,9 +212,9 @@
static int __init omap3_l3_probe(struct platform_device *pdev)
{
- struct omap3_l3 *l3;
- struct resource *res;
- int ret;
+ struct omap3_l3 *l3;
+ struct resource *res;
+ int ret;
l3 = kzalloc(sizeof(*l3), GFP_KERNEL);
if (!l3)
diff --git a/arch/arm/mach-omap2/omap_l3_smx.h b/arch/arm/mach-omap2/omap_l3_smx.h
index ba2ed9a..4f3cebc 100644
--- a/arch/arm/mach-omap2/omap_l3_smx.h
+++ b/arch/arm/mach-omap2/omap_l3_smx.h
@@ -1,26 +1,26 @@
- /*
- * OMAP3XXX L3 Interconnect Driver header
- *
- * Copyright (C) 2011 Texas Corporation
- * Felipe Balbi <balbi@ti.com>
- * Santosh Shilimkar <santosh.shilimkar@ti.com>
- * sricharan <r.sricharan@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
+/*
+ * OMAP3XXX L3 Interconnect Driver header
+ *
+ * Copyright (C) 2011 Texas Corporation
+ * Felipe Balbi <balbi@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
#ifndef __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
#define __ARCH_ARM_MACH_OMAP2_L3_INTERCONNECT_3XXX_H
@@ -40,7 +40,7 @@
#define L3_SI_CONTROL 0x020
#define L3_SI_FLAG_STATUS_0 0x510
-const u64 shift = 1;
+static const u64 shift = 1;
#define L3_STATUS_0_MPUIA_BRST (shift << 0)
#define L3_STATUS_0_MPUIA_RSP (shift << 1)
@@ -78,32 +78,32 @@
#define L3_STATUS_0_L4EMUTA_REQ (shift << 60)
#define L3_STATUS_0_MAD2DTA_REQ (shift << 61)
-#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
- | L3_STATUS_0_MPUIA_RSP \
- | L3_STATUS_0_IVAIA_BRST \
- | L3_STATUS_0_IVAIA_RSP \
- | L3_STATUS_0_SGXIA_BRST \
- | L3_STATUS_0_SGXIA_RSP \
- | L3_STATUS_0_CAMIA_BRST \
- | L3_STATUS_0_CAMIA_RSP \
- | L3_STATUS_0_DISPIA_BRST \
- | L3_STATUS_0_DISPIA_RSP \
- | L3_STATUS_0_DMARDIA_BRST \
- | L3_STATUS_0_DMARDIA_RSP \
- | L3_STATUS_0_DMAWRIA_BRST \
- | L3_STATUS_0_DMAWRIA_RSP \
- | L3_STATUS_0_USBOTGIA_BRST \
- | L3_STATUS_0_USBOTGIA_RSP \
- | L3_STATUS_0_USBHOSTIA_BRST \
- | L3_STATUS_0_SMSTA_REQ \
- | L3_STATUS_0_GPMCTA_REQ \
- | L3_STATUS_0_OCMRAMTA_REQ \
- | L3_STATUS_0_OCMROMTA_REQ \
- | L3_STATUS_0_IVATA_REQ \
- | L3_STATUS_0_SGXTA_REQ \
- | L3_STATUS_0_L4CORETA_REQ \
- | L3_STATUS_0_L4PERTA_REQ \
- | L3_STATUS_0_L4EMUTA_REQ \
+#define L3_STATUS_0_TIMEOUT_MASK (L3_STATUS_0_MPUIA_BRST \
+ | L3_STATUS_0_MPUIA_RSP \
+ | L3_STATUS_0_IVAIA_BRST \
+ | L3_STATUS_0_IVAIA_RSP \
+ | L3_STATUS_0_SGXIA_BRST \
+ | L3_STATUS_0_SGXIA_RSP \
+ | L3_STATUS_0_CAMIA_BRST \
+ | L3_STATUS_0_CAMIA_RSP \
+ | L3_STATUS_0_DISPIA_BRST \
+ | L3_STATUS_0_DISPIA_RSP \
+ | L3_STATUS_0_DMARDIA_BRST \
+ | L3_STATUS_0_DMARDIA_RSP \
+ | L3_STATUS_0_DMAWRIA_BRST \
+ | L3_STATUS_0_DMAWRIA_RSP \
+ | L3_STATUS_0_USBOTGIA_BRST \
+ | L3_STATUS_0_USBOTGIA_RSP \
+ | L3_STATUS_0_USBHOSTIA_BRST \
+ | L3_STATUS_0_SMSTA_REQ \
+ | L3_STATUS_0_GPMCTA_REQ \
+ | L3_STATUS_0_OCMRAMTA_REQ \
+ | L3_STATUS_0_OCMROMTA_REQ \
+ | L3_STATUS_0_IVATA_REQ \
+ | L3_STATUS_0_SGXTA_REQ \
+ | L3_STATUS_0_L4CORETA_REQ \
+ | L3_STATUS_0_L4PERTA_REQ \
+ | L3_STATUS_0_L4EMUTA_REQ \
| L3_STATUS_0_MAD2DTA_REQ)
#define L3_SI_FLAG_STATUS_1 0x530
@@ -137,19 +137,19 @@
enum omap3_l3_initiator_id {
/* LCD has 1 ID */
- OMAP_L3_LCD = 29,
+ OMAP_L3_LCD = 29,
/* SAD2D has 1 ID */
- OMAP_L3_SAD2D = 28,
+ OMAP_L3_SAD2D = 28,
/* MPU has 5 IDs */
- OMAP_L3_IA_MPU_SS_1 = 27,
- OMAP_L3_IA_MPU_SS_2 = 26,
- OMAP_L3_IA_MPU_SS_3 = 25,
- OMAP_L3_IA_MPU_SS_4 = 24,
- OMAP_L3_IA_MPU_SS_5 = 23,
+ OMAP_L3_IA_MPU_SS_1 = 27,
+ OMAP_L3_IA_MPU_SS_2 = 26,
+ OMAP_L3_IA_MPU_SS_3 = 25,
+ OMAP_L3_IA_MPU_SS_4 = 24,
+ OMAP_L3_IA_MPU_SS_5 = 23,
/* IVA2.2 SS has 3 IDs*/
- OMAP_L3_IA_IVA_SS_1 = 22,
- OMAP_L3_IA_IVA_SS_2 = 21,
- OMAP_L3_IA_IVA_SS_3 = 20,
+ OMAP_L3_IA_IVA_SS_1 = 22,
+ OMAP_L3_IA_IVA_SS_2 = 21,
+ OMAP_L3_IA_IVA_SS_3 = 20,
/* IVA 2.2 SS DMA has 6 IDS */
OMAP_L3_IA_IVA_SS_DMA_1 = 19,
OMAP_L3_IA_IVA_SS_DMA_2 = 18,
@@ -158,25 +158,25 @@
OMAP_L3_IA_IVA_SS_DMA_5 = 15,
OMAP_L3_IA_IVA_SS_DMA_6 = 14,
/* SGX has 1 ID */
- OMAP_L3_IA_SGX = 13,
+ OMAP_L3_IA_SGX = 13,
/* CAM has 3 ID */
- OMAP_L3_IA_CAM_1 = 12,
- OMAP_L3_IA_CAM_2 = 11,
- OMAP_L3_IA_CAM_3 = 10,
+ OMAP_L3_IA_CAM_1 = 12,
+ OMAP_L3_IA_CAM_2 = 11,
+ OMAP_L3_IA_CAM_3 = 10,
/* DAP has 1 ID */
- OMAP_L3_IA_DAP = 9,
+ OMAP_L3_IA_DAP = 9,
/* SDMA WR has 2 IDs */
- OMAP_L3_SDMA_WR_1 = 8,
- OMAP_L3_SDMA_WR_2 = 7,
+ OMAP_L3_SDMA_WR_1 = 8,
+ OMAP_L3_SDMA_WR_2 = 7,
/* SDMA RD has 4 IDs */
- OMAP_L3_SDMA_RD_1 = 6,
- OMAP_L3_SDMA_RD_2 = 5,
- OMAP_L3_SDMA_RD_3 = 4,
- OMAP_L3_SDMA_RD_4 = 3,
+ OMAP_L3_SDMA_RD_1 = 6,
+ OMAP_L3_SDMA_RD_2 = 5,
+ OMAP_L3_SDMA_RD_3 = 4,
+ OMAP_L3_SDMA_RD_4 = 3,
/* HSUSB OTG has 1 ID */
- OMAP_L3_USBOTG = 2,
+ OMAP_L3_USBOTG = 2,
/* HSUSB HOST has 1 ID */
- OMAP_L3_USBHOST = 1,
+ OMAP_L3_USBHOST = 1,
};
enum omap3_l3_code {
@@ -192,21 +192,21 @@
};
struct omap3_l3 {
- struct device *dev;
- struct clk *ick;
+ struct device *dev;
+ struct clk *ick;
/* memory base*/
- void __iomem *rt;
+ void __iomem *rt;
- int debug_irq;
- int app_irq;
+ int debug_irq;
+ int app_irq;
/* true when and inband functional error occurs */
- unsigned inband:1;
+ unsigned inband:1;
};
/* offsets for l3 agents in order with the Flag status register */
-unsigned int __iomem omap3_l3_app_bases[] = {
+static unsigned int omap3_l3_app_bases[] = {
/* MPU IA */
0x1400,
0x1400,
@@ -305,7 +305,7 @@
0,
};
-unsigned int __iomem omap3_l3_debug_bases[] = {
+static unsigned int omap3_l3_debug_bases[] = {
/* MPU DATA IA */
0x1400,
/* RESERVED */
@@ -321,7 +321,7 @@
/* REST RESERVED */
};
-u32 *omap3_l3_bases[] = {
+static u32 *omap3_l3_bases[] = {
omap3_l3_app_bases,
omap3_l3_debug_bases,
};
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 07d6140..f515a1a 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -42,8 +42,11 @@
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
+#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
+#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
+#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
@@ -95,6 +98,8 @@
is_offset_valid = true;
}
+ if (!vsel)
+ return 0;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -106,9 +111,9 @@
return 1350000;
if (smps_offset & 0x8)
- return ((((vsel - 1) * 125) + 7000)) * 100;
+ return ((((vsel - 1) * 1266) + 70900)) * 10;
else
- return ((((vsel - 1) * 125) + 6000)) * 100;
+ return ((((vsel - 1) * 1266) + 60770)) * 10;
}
static u8 twl6030_uv_to_vsel(unsigned long uv)
@@ -127,6 +132,8 @@
is_offset_valid = true;
}
+ if (!uv)
+ return 0x00;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
@@ -134,16 +141,21 @@
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
- if (uv == 1350000)
+ if (uv > twl6030_vsel_to_uv(0x39)) {
+ if (uv == 1350000)
+ return 0x3A;
+ pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
+ __func__, uv, twl6030_vsel_to_uv(0x39));
return 0x3A;
+ }
if (smps_offset & 0x8)
- return DIV_ROUND_UP(uv - 700000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 709000, 12660) + 1;
else
- return DIV_ROUND_UP(uv - 600000, 12500) + 1;
+ return DIV_ROUND_UP(uv - 607700, 12660) + 1;
}
-static struct omap_volt_pmic_info omap3_mpu_volt_info = {
+static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -158,12 +170,13 @@
.vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap3_core_volt_info = {
+static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.on_volt = 1200000,
@@ -178,18 +191,19 @@
.vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_mpu_volt_info = {
+static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1350000,
- .onlp_volt = 1350000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1375000,
+ .onlp_volt = 1375000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -198,18 +212,20 @@
.vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_iva_volt_info = {
+static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1188000,
+ .onlp_volt = 1188000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -218,18 +234,20 @@
.vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
+ .i2c_high_speed = true,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
-static struct omap_volt_pmic_info omap4_core_volt_info = {
+static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
- .step_size = 12500,
- .on_volt = 1100000,
- .onlp_volt = 1100000,
- .ret_volt = 837500,
- .off_volt = 600000,
+ .step_size = 12660,
+ .on_volt = 1200000,
+ .onlp_volt = 1200000,
+ .ret_volt = 830000,
+ .off_volt = 0,
.volt_setup_time = 0,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
@@ -238,7 +256,8 @@
.vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
- .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
+ .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
@@ -250,14 +269,14 @@
if (!cpu_is_omap44xx())
return -ENODEV;
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu");
+ omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("iva");
- omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
+ voltdm = voltdm_lookup("iva");
+ omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
return 0;
}
@@ -270,10 +289,10 @@
return -ENODEV;
if (cpu_is_omap3630()) {
- omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
- omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
- omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
- omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
+ omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
+ omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
+ omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
+ omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
}
/*
@@ -288,11 +307,11 @@
if (!twl_sr_enable_autoinit)
omap3_twl_set_sr_bit(true);
- voltdm = omap_voltage_domain_lookup("mpu");
- omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
+ voltdm = voltdm_lookup("mpu_iva");
+ omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
- voltdm = omap_voltage_domain_lookup("core");
- omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
+ voltdm = voltdm_lookup("core");
+ omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
return 0;
}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
index ab8b35b..9262a6b 100644
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -69,7 +69,7 @@
opp_def->hwmod_name, i);
return -EINVAL;
}
- dev = &oh->od->pdev.dev;
+ dev = &oh->od->pdev->dev;
r = opp_add(dev, opp_def->freq, opp_def->u_volt);
if (r) {
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 472bf22..2ab7a9e 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -26,54 +26,21 @@
static struct omap_device_pm_latency *pm_lats;
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
- WARN_ON_ONCE(!mpu_dev);
- return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
- WARN_ON_ONCE(!iva_dev);
- return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
- WARN_ON_ONCE(!l3_dev);
- return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
- WARN_ON_ONCE(!dsp_dev);
- return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
{
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
oh = omap_hwmod_lookup(name);
if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
__func__, name))
return -ENODEV;
- od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
- if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n",
+ pdev = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false);
+ if (WARN(IS_ERR(pdev), "%s: could not build omap_device for %s\n",
__func__, name))
return -ENODEV;
- *new_dev = &od->pdev.dev;
-
return 0;
}
@@ -82,16 +49,16 @@
*/
static void omap2_init_processor_devices(void)
{
- _init_omap_device("mpu", &mpu_dev);
+ _init_omap_device("mpu");
if (omap3_has_iva())
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("iva");
if (cpu_is_omap44xx()) {
- _init_omap_device("l3_main_1", &l3_dev);
- _init_omap_device("dsp", &dsp_dev);
- _init_omap_device("iva", &iva_dev);
+ _init_omap_device("l3_main_1");
+ _init_omap_device("dsp");
+ _init_omap_device("iva");
} else {
- _init_omap_device("l3_main", &l3_dev);
+ _init_omap_device("l3_main");
}
}
@@ -136,8 +103,8 @@
ret = pwrdm_set_next_pwrst(pwrdm, state);
if (ret) {
- printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
- pwrdm->name);
+ pr_err("%s: unable to set state of powerdomain: %s\n",
+ __func__, pwrdm->name);
goto err;
}
@@ -161,37 +128,44 @@
}
/*
- * This API is to be called during init to put the various voltage
+ * This API is to be called during init to set the various voltage
* domains to the voltage as per the opp table. Typically we boot up
* at the nominal voltage. So this function finds out the rate of
* the clock associated with the voltage domain, finds out the correct
- * opp entry and puts the voltage domain to the voltage specifies
+ * opp entry and sets the voltage domain to the voltage specified
* in the opp entry
*/
static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
- struct device *dev)
+ const char *oh_name)
{
struct voltagedomain *voltdm;
struct clk *clk;
struct opp *opp;
unsigned long freq, bootup_volt;
+ struct device *dev;
- if (!vdd_name || !clk_name || !dev) {
- printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+ if (!vdd_name || !clk_name || !oh_name) {
+ pr_err("%s: invalid parameters\n", __func__);
goto exit;
}
- voltdm = omap_voltage_domain_lookup(vdd_name);
+ dev = omap_device_get_by_hwmod_name(oh_name);
+ if (IS_ERR(dev)) {
+ pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+ __func__, oh_name);
+ goto exit;
+ }
+
+ voltdm = voltdm_lookup(vdd_name);
if (IS_ERR(voltdm)) {
- printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+ pr_err("%s: unable to get vdd pointer for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
clk = clk_get(NULL, clk_name);
if (IS_ERR(clk)) {
- printk(KERN_ERR "%s: unable to get clk %s\n",
- __func__, clk_name);
+ pr_err("%s: unable to get clk %s\n", __func__, clk_name);
goto exit;
}
@@ -200,24 +174,23 @@
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
- printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+ pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
if (!bootup_volt) {
- printk(KERN_ERR "%s: unable to find voltage corresponding"
+ pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
goto exit;
}
- omap_voltage_scale_vdd(voltdm, bootup_volt);
+ voltdm_scale(voltdm, bootup_volt);
return 0;
exit:
- printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
- __func__, vdd_name);
+ pr_err("%s: unable to set vdd_%s\n", __func__, vdd_name);
return -EINVAL;
}
@@ -226,8 +199,8 @@
if (!cpu_is_omap34xx())
return;
- omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_ick", l3_dev);
+ omap2_set_init_voltage("mpu_iva", "dpll1_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_ick", "l3_main");
}
static void __init omap4_init_voltages(void)
@@ -235,14 +208,15 @@
if (!cpu_is_omap44xx())
return;
- omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
- omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
- omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+ omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+ omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+ omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
}
static int __init omap2_common_pm_init(void)
{
- omap2_init_processor_devices();
+ if (!of_have_populated_dt())
+ omap2_init_processor_devices();
omap_pm_if_init();
return 0;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bf089e7..cf0c216 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -53,8 +53,6 @@
#include "powerdomain.h"
#include "clockdomain.h"
-static int omap2_pm_debug;
-
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
@@ -96,7 +94,6 @@
static void omap2_enter_full_retention(void)
{
u32 l;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* There is 1 reference hold for all children of the oscillator
* clock, the following will remove it. If no one else uses the
@@ -124,10 +121,6 @@
omap2_gpio_prepare_for_idle(0);
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
/* One last check for pending IRQs to avoid extra latency due
* to sleeping unnecessarily. */
if (omap_irq_pending())
@@ -155,13 +148,6 @@
console_unlock();
no_sleep:
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
omap2_gpio_resume_after_idle();
clk_enable(osc_ck);
@@ -219,7 +205,6 @@
static void omap2_enter_mpu_retention(void)
{
int only_idle = 0;
- struct timespec ts_preidle, ts_postidle, ts_idle;
/* Putting MPU into the WFI state while a transfer is active
* seems to cause the I2C block to timeout. Why? Good question. */
@@ -246,19 +231,7 @@
only_idle = 1;
}
- if (omap2_pm_debug) {
- getnstimeofday(&ts_preidle);
- }
-
omap2_sram_idle();
-
- if (omap2_pm_debug) {
- unsigned long long tmp;
-
- getnstimeofday(&ts_postidle);
- ts_idle = timespec_sub(ts_postidle, ts_preidle);
- tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
- }
}
static int omap2_can_sleep(void)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7255d9b..c8cbd00 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -55,7 +55,7 @@
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
- return (suspend_state != PM_SUSPEND_ON);
+ return (suspend_state != PM_SUSPEND_ON) && console_suspend_enabled;
}
#else
static inline bool is_suspending(void)
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
index 171fccd..f97afff 100644
--- a/arch/arm/mach-omap2/powerdomain-common.c
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -1,9 +1,8 @@
/*
- * linux/arch/arm/mach-omap2/powerdomain-common.c
- * Contains common powerdomain framework functions
+ * Common powerdomain framework functions
*
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
*
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index ef71fdd..5164d58 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1,7 +1,7 @@
/*
* OMAP powerdomain control
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Written by Paul Walmsley
@@ -77,13 +77,11 @@
static int _pwrdm_register(struct powerdomain *pwrdm)
{
int i;
+ struct voltagedomain *voltdm;
if (!pwrdm || !pwrdm->name)
return -EINVAL;
- if (!omap_chip_is(pwrdm->omap_chip))
- return -EINVAL;
-
if (cpu_is_omap44xx() &&
pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) {
pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",
@@ -94,6 +92,16 @@
if (_pwrdm_lookup(pwrdm->name))
return -EEXIST;
+ voltdm = voltdm_lookup(pwrdm->voltdm.name);
+ if (!voltdm) {
+ pr_err("powerdomain: %s: voltagedomain %s does not exist\n",
+ pwrdm->name, pwrdm->voltdm.name);
+ return -EINVAL;
+ }
+ pwrdm->voltdm.ptr = voltdm;
+ INIT_LIST_HEAD(&pwrdm->voltdm_node);
+ voltdm_add_pwrdm(voltdm, pwrdm);
+
list_add(&pwrdm->node, &pwrdm_list);
/* Initialize the powerdomain's state counter */
@@ -194,36 +202,76 @@
/* Public functions */
/**
- * pwrdm_init - set up the powerdomain layer
- * @pwrdms: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specific implementations
+ * pwrdm_register_platform_funcs - register powerdomain implementation fns
+ * @po: func pointers for arch specific implementations
*
- * Loop through the array of powerdomains @pwrdms, registering all
- * that are available on the current CPU. Also, program all
- * powerdomain target state as ON; this is to prevent domains from
- * hitting low power states (if bootloader has target states set to
- * something other than ON) and potentially even losing context while
- * PM is not fully initialized. The PM late init code can then program
- * the desired target state for all the power domains. No return
- * value.
+ * Register the list of function pointers used to implement the
+ * powerdomain functions on different OMAP SoCs. Should be called
+ * before any other pwrdm_register*() function. Returns -EINVAL if
+ * @po is null, -EEXIST if platform functions have already been
+ * registered, or 0 upon success.
*/
-void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs)
+int pwrdm_register_platform_funcs(struct pwrdm_ops *po)
+{
+ if (!po)
+ return -EINVAL;
+
+ if (arch_pwrdm)
+ return -EEXIST;
+
+ arch_pwrdm = po;
+
+ return 0;
+}
+
+/**
+ * pwrdm_register_pwrdms - register SoC powerdomains
+ * @ps: pointer to an array of struct powerdomain to register
+ *
+ * Register the powerdomains available on a particular OMAP SoC. Must
+ * be called after pwrdm_register_platform_funcs(). May be called
+ * multiple times. Returns -EACCES if called before
+ * pwrdm_register_platform_funcs(); -EINVAL if the argument @ps is
+ * null; or 0 upon success.
+ */
+int pwrdm_register_pwrdms(struct powerdomain **ps)
{
struct powerdomain **p = NULL;
+
+ if (!arch_pwrdm)
+ return -EEXIST;
+
+ if (!ps)
+ return -EINVAL;
+
+ for (p = ps; *p; p++)
+ _pwrdm_register(*p);
+
+ return 0;
+}
+
+/**
+ * pwrdm_complete_init - set up the powerdomain layer
+ *
+ * Do whatever is necessary to initialize registered powerdomains and
+ * powerdomain code. Currently, this programs the next power state
+ * for each powerdomain to ON. This prevents powerdomains from
+ * unexpectedly losing context or entering high wakeup latency modes
+ * with non-power-management-enabled kernels. Must be called after
+ * pwrdm_register_pwrdms(). Returns -EACCES if called before
+ * pwrdm_register_pwrdms(), or 0 upon success.
+ */
+int pwrdm_complete_init(void)
+{
struct powerdomain *temp_p;
- if (!custom_funcs)
- WARN(1, "powerdomain: No custom pwrdm functions registered\n");
- else
- arch_pwrdm = custom_funcs;
-
- if (pwrdms) {
- for (p = pwrdms; *p; p++)
- _pwrdm_register(*p);
- }
+ if (list_empty(&pwrdm_list))
+ return -EACCES;
list_for_each_entry(temp_p, &pwrdm_list, node)
pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON);
+
+ return 0;
}
/**
@@ -390,6 +438,18 @@
}
/**
+ * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in
+ * @pwrdm: struct powerdomain *
+ *
+ * Return a pointer to the struct voltageomain that the specified powerdomain
+ * @pwrdm exists in.
+ */
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm)
+{
+ return pwrdm->voltdm.ptr;
+}
+
+/**
* pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain
* @pwrdm: struct powerdomain *
*
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index d23d979..42e6dd8 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -24,6 +24,8 @@
#include <plat/cpu.h>
+#include "voltage.h"
+
/* Powerdomain basic power states */
#define PWRDM_POWER_OFF 0x0
#define PWRDM_POWER_RET 0x1
@@ -78,7 +80,7 @@
/**
* struct powerdomain - OMAP powerdomain
* @name: Powerdomain name
- * @omap_chip: represents the OMAP chip types containing this pwrdm
+ * @voltdm: voltagedomain containing this powerdomain
* @prcm_offs: the address offset from CM_BASE/PRM_BASE
* @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
* @pwrsts: Possible powerdomain power states
@@ -89,6 +91,7 @@
* @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
+ * @voltdm_node: list_head linking all powerdomains in a voltagedomain
* @state:
* @state_counter:
* @timer:
@@ -98,7 +101,10 @@
*/
struct powerdomain {
const char *name;
- const struct omap_chip_id omap_chip;
+ union {
+ const char *name;
+ struct voltagedomain *ptr;
+ } voltdm;
const s16 prcm_offs;
const u8 pwrsts;
const u8 pwrsts_logic_ret;
@@ -109,6 +115,7 @@
const u8 prcm_partition;
struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
struct list_head node;
+ struct list_head voltdm_node;
int state;
unsigned state_counter[PWRDM_MAX_PWRSTS];
unsigned ret_logic_off_counter;
@@ -162,7 +169,9 @@
int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
};
-void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
+int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
+int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
+int pwrdm_complete_init(void);
struct powerdomain *pwrdm_lookup(const char *name);
@@ -176,6 +185,7 @@
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm));
+struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
@@ -210,7 +220,8 @@
u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
-extern void omap2xxx_powerdomains_init(void);
+extern void omap242x_powerdomains_init(void);
+extern void omap243x_powerdomains_init(void);
extern void omap3xxx_powerdomains_init(void);
extern void omap44xx_powerdomains_init(void);
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index cf600e2..6a17e4c 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -1,7 +1,7 @@
/*
* OMAP2 and OMAP3 powerdomain control
*
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2007-2009 Nokia Corporation
*
* Derived from mach-omap2/powerdomain.c written by Paul Walmsley
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 4210c33..d3a5399 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2/3 common powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -12,20 +12,6 @@
*/
/*
- * To Do List
- * -> Move the Sleep/Wakeup dependencies from Power Domain framework to
- * Clock Domain Framework
- */
-
-/*
- * This file contains all of the powerdomains that have some element
- * of software control for the OMAP24xx and OMAP34xx chips.
- *
- * This is not an exhaustive listing of powerdomains on the chips; only
- * powerdomains that can be controlled in software.
- */
-
-/*
* The names for the DSP/IVA2 powerdomains are confusing.
*
* Most OMAP chips have an on-board DSP.
@@ -59,8 +45,6 @@
struct powerdomain gfx_omap2_pwrdm = {
.name = "gfx_pwrdm",
.prcm_offs = GFX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
- CHIP_IS_OMAP3430ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -70,11 +54,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
struct powerdomain wkup_omap2_pwrdm = {
.name = "wkup_pwrdm",
.prcm_offs = WKUP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_ON,
+ .voltdm = { .name = "wakeup" },
};
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index cc389fb..2385c1f 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP2XXX powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -28,7 +28,6 @@
static struct powerdomain dsp_pwrdm = {
.name = "dsp_pwrdm",
.prcm_offs = OMAP24XX_DSP_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -38,12 +37,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain mpu_24xx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -53,12 +52,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON,
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_24xx_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX),
.pwrsts = PWRSTS_OFF_RET_ON,
.banks = 3,
.pwrsts_mem_ret = {
@@ -71,6 +70,7 @@
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
[2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */
},
+ .voltdm = { .name = "core" },
};
@@ -78,14 +78,11 @@
* 2430-specific powerdomains
*/
-#ifdef CONFIG_SOC_OMAP2430
-
/* XXX 2430 KILLDOMAINWKUP bit? No current users apparently */
static struct powerdomain mdm_pwrdm = {
.name = "mdm_pwrdm",
.prcm_offs = OMAP2430_MDM_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
.banks = 1,
@@ -95,29 +92,44 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
-#endif /* CONFIG_SOC_OMAP2430 */
+/*
+ *
+ */
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap24xx[] __initdata = {
&wkup_omap2_pwrdm,
&gfx_omap2_pwrdm,
-
-#ifdef CONFIG_ARCH_OMAP2
&dsp_pwrdm,
&mpu_24xx_pwrdm,
&core_24xx_pwrdm,
-#endif
-
-#ifdef CONFIG_SOC_OMAP2430
- &mdm_pwrdm,
-#endif
NULL
};
-void __init omap2xxx_powerdomains_init(void)
+static struct powerdomain *powerdomains_omap2430[] __initdata = {
+ &mdm_pwrdm,
+ NULL
+};
+
+void __init omap242x_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap2xxx, &omap2_pwrdm_operations);
+ if (!cpu_is_omap2420())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_complete_init();
+}
+
+void __init omap243x_powerdomains_init(void)
+{
+ if (!cpu_is_omap2430())
+ return;
+
+ pwrdm_register_platform_funcs(&omap2_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap24xx);
+ pwrdm_register_pwrdms(powerdomains_omap2430);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..8ef26da 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP3 powerdomain definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2011 Texas Instruments, Inc.
* Copyright (C) 2007-2011 Nokia Corporation
*
* Paul Walmsley, Jouni Högander
@@ -14,6 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
+#include <plat/cpu.h>
+
#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
@@ -27,8 +29,6 @@
* 34XX-specific powerdomains, dependencies
*/
-#ifdef CONFIG_ARCH_OMAP3
-
/*
* Powerdomains
*/
@@ -36,7 +36,6 @@
static struct powerdomain iva2_pwrdm = {
.name = "iva2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 4,
@@ -52,12 +51,12 @@
[2] = PWRSTS_OFF_ON,
[3] = PWRSTS_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain mpu_3xxx_pwrdm = {
.name = "mpu_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.flags = PWRDM_HAS_MPU_QUIRK,
@@ -68,6 +67,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
+ .voltdm = { .name = "mpu_iva" },
};
/*
@@ -83,10 +83,6 @@
static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES1 |
- CHIP_IS_OMAP3430ES2 |
- CHIP_IS_OMAP3430ES3_0 |
- CHIP_IS_OMAP3630ES1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -98,13 +94,12 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain core_3xxx_es3_1_pwrdm = {
.name = "core_pwrdm",
.prcm_offs = CORE_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES3_1 |
- CHIP_GE_OMAP3630ES1_1),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
/*
@@ -121,11 +116,11 @@
[0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */
[1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dss_pwrdm = {
.name = "dss_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_DSS_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -136,6 +131,7 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
/*
@@ -146,7 +142,6 @@
static struct powerdomain sgx_pwrdm = {
.name = "sgx_pwrdm",
.prcm_offs = OMAP3430ES2_SGX_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
/* XXX This is accurate for 3430 SGX, but what about GFX? */
.pwrsts = PWRSTS_OFF_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -157,11 +152,11 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain cam_pwrdm = {
.name = "cam_pwrdm",
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.prcm_offs = OMAP3430_CAM_MOD,
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
@@ -172,12 +167,12 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain per_pwrdm = {
.name = "per_pwrdm",
.prcm_offs = OMAP3430_PER_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -187,26 +182,26 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain emu_pwrdm = {
.name = "emu_pwrdm",
.prcm_offs = OMAP3430_EMU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain neon_pwrdm = {
.name = "neon_pwrdm",
.prcm_offs = OMAP3430_NEON_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain usbhost_pwrdm = {
.name = "usbhost_pwrdm",
.prcm_offs = OMAP3430ES2_USBHOST_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_RET,
/*
@@ -223,65 +218,103 @@
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* MEMONSTATE */
},
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll1_pwrdm = {
.name = "dpll1_pwrdm",
.prcm_offs = MPU_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll2_pwrdm = {
.name = "dpll2_pwrdm",
.prcm_offs = OMAP3430_IVA2_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "mpu_iva" },
};
static struct powerdomain dpll3_pwrdm = {
.name = "dpll3_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll4_pwrdm = {
.name = "dpll4_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .voltdm = { .name = "core" },
};
static struct powerdomain dpll5_pwrdm = {
.name = "dpll5_pwrdm",
.prcm_offs = PLL_MOD,
- .omap_chip = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
+ .voltdm = { .name = "core" },
};
/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap3xxx[] __initdata = {
-
+static struct powerdomain *powerdomains_omap3430_common[] __initdata = {
&wkup_omap2_pwrdm,
- &gfx_omap2_pwrdm,
&iva2_pwrdm,
&mpu_3xxx_pwrdm,
&neon_pwrdm,
- &core_3xxx_pre_es3_1_pwrdm,
- &core_3xxx_es3_1_pwrdm,
&cam_pwrdm,
&dss_pwrdm,
&per_pwrdm,
&emu_pwrdm,
- &sgx_pwrdm,
- &usbhost_pwrdm,
&dpll1_pwrdm,
&dpll2_pwrdm,
&dpll3_pwrdm,
&dpll4_pwrdm,
- &dpll5_pwrdm,
-#endif
NULL
};
+static struct powerdomain *powerdomains_omap3430es1[] __initdata = {
+ &gfx_omap2_pwrdm,
+ &core_3xxx_pre_es3_1_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.0 */
+static struct powerdomain *powerdomains_omap3430es2_es3_0[] __initdata = {
+ &core_3xxx_pre_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
+
+/* also includes 3630ES1.1+ */
+static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = {
+ &core_3xxx_es3_1_pwrdm,
+ &sgx_pwrdm,
+ &usbhost_pwrdm,
+ &dpll5_pwrdm,
+ NULL
+};
void __init omap3xxx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations);
+ unsigned int rev;
+
+ if (!cpu_is_omap34xx())
+ return;
+
+ pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap3430_common);
+
+ rev = omap_rev();
+
+ if (rev == OMAP3430_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es1);
+ else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
+ rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
+ pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
+ else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
+ rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
+ rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
+ pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
+ else
+ WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
+
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 247e794..704664c 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -33,9 +33,9 @@
/* core_44xx_pwrdm: CORE power domain */
static struct powerdomain core_44xx_pwrdm = {
.name = "core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CORE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 5,
@@ -59,9 +59,9 @@
/* gfx_44xx_pwrdm: 3D accelerator power domain */
static struct powerdomain gfx_44xx_pwrdm = {
.name = "gfx_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_GFX_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -76,9 +76,9 @@
/* abe_44xx_pwrdm: Audio back end power domain */
static struct powerdomain abe_44xx_pwrdm = {
.name = "abe_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_ABE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
@@ -96,9 +96,9 @@
/* dss_44xx_pwrdm: Display subsystem power domain */
static struct powerdomain dss_44xx_pwrdm = {
.name = "dss_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_DSS_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
@@ -114,9 +114,9 @@
/* tesla_44xx_pwrdm: Tesla processor power domain */
static struct powerdomain tesla_44xx_pwrdm = {
.name = "tesla_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_TESLA_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -136,9 +136,9 @@
/* wkup_44xx_pwrdm: Wake-up power domain */
static struct powerdomain wkup_44xx_pwrdm = {
.name = "wkup_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_WKUP_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -152,9 +152,9 @@
/* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
static struct powerdomain cpu0_44xx_pwrdm = {
.name = "cpu0_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -169,9 +169,9 @@
/* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
static struct powerdomain cpu1_44xx_pwrdm = {
.name = "cpu1_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST,
.prcm_partition = OMAP4430_PRCM_MPU_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -186,9 +186,9 @@
/* emu_44xx_pwrdm: Emulation power domain */
static struct powerdomain emu_44xx_pwrdm = {
.name = "emu_pwrdm",
+ .voltdm = { .name = "wakeup" },
.prcm_offs = OMAP4430_PRM_EMU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -202,9 +202,9 @@
/* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
static struct powerdomain mpu_44xx_pwrdm = {
.name = "mpu_pwrdm",
+ .voltdm = { .name = "mpu" },
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
@@ -223,9 +223,9 @@
/* ivahd_44xx_pwrdm: IVA-HD power domain */
static struct powerdomain ivahd_44xx_pwrdm = {
.name = "ivahd_pwrdm",
+ .voltdm = { .name = "iva" },
.prcm_offs = OMAP4430_PRM_IVAHD_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
@@ -247,9 +247,9 @@
/* cam_44xx_pwrdm: Camera subsystem power domain */
static struct powerdomain cam_44xx_pwrdm = {
.name = "cam_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CAM_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
.pwrsts_mem_ret = {
@@ -264,9 +264,9 @@
/* l3init_44xx_pwrdm: L3 initators pheripherals power domain */
static struct powerdomain l3init_44xx_pwrdm = {
.name = "l3init_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L3INIT_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 1,
@@ -282,9 +282,9 @@
/* l4per_44xx_pwrdm: Target peripherals power domain */
static struct powerdomain l4per_44xx_pwrdm = {
.name = "l4per_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_L4PER_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 2,
@@ -305,18 +305,18 @@
*/
static struct powerdomain always_on_core_44xx_pwrdm = {
.name = "always_on_core_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_ON,
};
/* cefuse_44xx_pwrdm: Customer efuse controller power domain */
static struct powerdomain cefuse_44xx_pwrdm = {
.name = "cefuse_pwrdm",
+ .voltdm = { .name = "core" },
.prcm_offs = OMAP4430_PRM_CEFUSE_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
- .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_ON,
.flags = PWRDM_HAS_LOWPOWERSTATECHANGE,
};
@@ -352,5 +352,7 @@
void __init omap44xx_powerdomains_init(void)
{
- pwrdm_init(powerdomains_omap44xx, &omap4_pwrdm_operations);
+ pwrdm_register_platform_funcs(&omap4_pwrdm_operations);
+ pwrdm_register_pwrdms(powerdomains_omap44xx);
+ pwrdm_complete_init();
}
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 2e40a5c..8db5f03 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -151,17 +151,10 @@
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->prm) {
- prm_base = ioremap(omap2_globals->prm, SZ_8K);
- WARN_ON(!prm_base);
- }
- if (omap2_globals->cm) {
- cm_base = ioremap(omap2_globals->cm, SZ_8K);
- WARN_ON(!cm_base);
- }
- if (omap2_globals->cm2) {
- cm2_base = ioremap(omap2_globals->cm2, SZ_8K);
- WARN_ON(!cm2_base);
- }
+ if (omap2_globals->prm)
+ prm_base = omap2_globals->prm;
+ if (omap2_globals->cm)
+ cm_base = omap2_globals->cm;
+ if (omap2_globals->cm2)
+ cm2_base = omap2_globals->cm2;
}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 051213f..f02d87f 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -20,6 +20,8 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
+
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
@@ -156,3 +158,57 @@
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
+
+/* PRM VP */
+
+/*
+ * struct omap3_vp - OMAP3 VP register access description.
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap3_vp {
+ u32 tranxdone_status;
+};
+
+static struct omap3_vp omap3_vp[] = {
+ [OMAP3_VP_VDD_MPU_ID] = {
+ .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
+ },
+ [OMAP3_VP_VDD_CORE_ID] = {
+ .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
+ },
+};
+
+#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
+
+u32 omap3_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap3_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap3_vp *vp = &omap3_vp[vp_id];
+
+ omap2_prm_write_mod_reg(vp->tranxdone_status,
+ OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
+u32 omap3_prm_vcvp_read(u8 offset)
+{
+ return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
+}
+
+void omap3_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
+}
+
+u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
+}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index a1fc62a..cef533d 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -303,7 +303,19 @@
extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+/* OMAP3-specific VP functions */
+u32 omap3_prm_vp_check_txdone(u8 vp_id);
+void omap3_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP3 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap3_prm_vcvp_read(u8 offset);
+extern void omap3_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
#endif /* CONFIG_ARCH_OMAP4 */
+
#endif
/*
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 0016555..495a31a 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -21,8 +21,11 @@
#include <plat/cpu.h>
#include <plat/prcm.h>
+#include "vp.h"
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prminst44xx.h"
/* PRM low-level functions */
@@ -50,3 +53,71 @@
return v;
}
+
+/* PRM VP */
+
+/*
+ * struct omap4_vp - OMAP4 VP register access description.
+ * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP
+ * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
+ */
+struct omap4_vp {
+ u32 irqstatus_mpu;
+ u32 tranxdone_status;
+};
+
+static struct omap4_vp omap4_vp[] = {
+ [OMAP4_VP_VDD_MPU_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
+ .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_IVA_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
+ },
+ [OMAP4_VP_VDD_CORE_ID] = {
+ .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
+ .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
+ },
+};
+
+u32 omap4_prm_vp_check_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+ u32 irqstatus;
+
+ irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+ return irqstatus & vp->tranxdone_status;
+}
+
+void omap4_prm_vp_clear_txdone(u8 vp_id)
+{
+ struct omap4_vp *vp = &omap4_vp[vp_id];
+
+ omap4_prminst_write_inst_reg(vp->tranxdone_status,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_OCP_SOCKET_INST,
+ vp->irqstatus_mpu);
+};
+
+u32 omap4_prm_vcvp_read(u8 offset)
+{
+ return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+void omap4_prm_vcvp_write(u32 val, u8 offset)
+{
+ omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST, offset);
+}
+
+u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
+{
+ return omap4_prminst_rmw_inst_reg_bits(mask, bits,
+ OMAP4430_PRM_PARTITION,
+ OMAP4430_PRM_DEVICE_INST,
+ offset);
+}
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 7dfa379..3d66ccd 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -751,6 +751,18 @@
extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+/* OMAP4-specific VP functions */
+u32 omap4_prm_vp_check_txdone(u8 vp_id);
+void omap4_prm_vp_clear_txdone(u8 vp_id);
+
+/*
+ * OMAP4 access functions for voltage controller (VC) and
+ * voltage proccessor (VP) in the PRM.
+ */
+extern u32 omap4_prm_vcvp_read(u8 offset);
+extern void omap4_prm_vcvp_write(u32 val, u8 offset);
+extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
+
# endif
#endif
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index da6f3a6..8f27828 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -117,15 +117,10 @@
void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
{
- /* Static mapping, never released */
- if (omap2_globals->sdrc) {
- omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K);
- WARN_ON(!omap2_sdrc_base);
- }
- if (omap2_globals->sms) {
- omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K);
- WARN_ON(!omap2_sms_base);
- }
+ if (omap2_globals->sdrc)
+ omap2_sdrc_base = omap2_globals->sdrc;
+ if (omap2_globals->sms)
+ omap2_sms_base = omap2_globals->sms;
}
/**
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 466fc722..9992dbf 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -107,28 +107,6 @@
static LIST_HEAD(uart_list);
static u8 num_uarts;
-static int uart_idle_hwmod(struct omap_device *od)
-{
- omap_hwmod_idle(od->hwmods[0]);
-
- return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
- omap_hwmod_enable(od->hwmods[0]);
-
- return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
- {
- .deactivate_func = uart_idle_hwmod,
- .activate_func = uart_enable_hwmod,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
{
@@ -711,7 +689,7 @@
{
struct omap_uart_state *uart;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
@@ -799,20 +777,19 @@
if (WARN_ON(!oh))
return;
- od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
- omap_uart_latency,
- ARRAY_SIZE(omap_uart_latency), false);
- WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
+ pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
+ NULL, 0, false);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
name, oh->name);
- omap_device_disable_idle_on_suspend(od);
+ omap_device_disable_idle_on_suspend(pdev);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
uart->membase = omap_hwmod_get_mpu_rt_va(oh);
- uart->pdev = &od->pdev;
+ uart->pdev = pdev;
oh->dev_attr = uart;
@@ -846,8 +823,8 @@
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
- device_init_wakeup(&od->pdev.dev, true);
- DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
+ device_init_wakeup(&pdev->dev, true);
+ DEV_CREATE_FILE(&pdev->dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
index f438cf4..53d9d0a 100644
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -15,7 +15,7 @@
static int sr_class3_enable(struct voltagedomain *voltdm)
{
- unsigned long volt = omap_voltage_get_nom_volt(voltdm);
+ unsigned long volt = voltdm_get_voltage(voltdm);
if (!volt) {
pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
@@ -32,7 +32,7 @@
omap_vp_disable(voltdm);
sr_disable(voltdm);
if (is_volt_reset)
- omap_voltage_reset(voltdm);
+ voltdm_reset(voltdm);
return 0;
}
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index f49804f..0347b93 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -62,6 +62,7 @@
static struct omap_sr_class_data *sr_class;
static struct omap_sr_pmic_data *sr_pmic_data;
+static struct dentry *sr_dbg_dir;
static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
{
@@ -826,9 +827,10 @@
struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
struct omap_sr_data *pdata = pdev->dev.platform_data;
struct resource *mem, *irq;
- struct dentry *vdd_dbg_dir, *nvalue_dir;
+ struct dentry *nvalue_dir;
struct omap_volt_data *volt_data;
int i, ret = 0;
+ char *name;
if (!sr_info) {
dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
@@ -899,18 +901,25 @@
}
dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-
- /*
- * If the voltage domain debugfs directory is not created, do
- * not try to create rest of the debugfs entries.
- */
- vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
- if (!vdd_dbg_dir) {
- ret = -EINVAL;
- goto err_iounmap;
+ if (!sr_dbg_dir) {
+ sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
+ if (!sr_dbg_dir) {
+ ret = PTR_ERR(sr_dbg_dir);
+ pr_err("%s:sr debugfs dir creation failed(%d)\n",
+ __func__, ret);
+ goto err_iounmap;
+ }
}
- sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
+ name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
+ if (!name) {
+ dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_iounmap;
+ }
+ sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
+ kfree(name);
if (IS_ERR(sr_info->dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 10d3c5e..9f43fcc 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -31,14 +31,6 @@
static bool sr_enable_on_init;
-static struct omap_device_pm_latency omap_sr_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
- },
-};
-
/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
@@ -80,7 +72,7 @@
static int sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data;
- struct omap_device *od;
+ struct platform_device *pdev;
struct omap_volt_data *volt_data;
char *name = "smartreflex";
static int i;
@@ -102,7 +94,7 @@
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
- sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name);
+ sr_data->voltdm = voltdm_lookup(oh->vdd_name);
if (IS_ERR(sr_data->voltdm)) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, oh->vdd_name);
@@ -120,10 +112,9 @@
sr_data->enable_on_init = sr_enable_on_init;
- od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
- omap_sr_latency,
- ARRAY_SIZE(omap_sr_latency), 0);
- if (IS_ERR(od))
+ pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+ NULL, 0, 0);
+ if (IS_ERR(pdev))
pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
__func__, name, oh->name);
exit:
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cf1de7d..e49fc7b 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -35,6 +35,7 @@
#include <linux/irq.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/slab.h>
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
@@ -42,6 +43,10 @@
#include <asm/sched_clock.h>
#include <plat/common.h>
#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#include "powerdomain.h"
/* Parent clocks, eventually these will come from the clock framework */
@@ -67,7 +72,7 @@
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
-u32 sys_timer_reserved;
+static u32 sys_timer_reserved;
/* Clockevent code */
@@ -78,7 +83,7 @@
{
struct clock_event_device *evt = &clockevent_gpt;
- __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_write_status(&clkev, OMAP_TIMER_INT_OVERFLOW);
evt->event_handler(evt);
return IRQ_HANDLED;
@@ -93,7 +98,7 @@
static int omap2_gp_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST,
+ __omap_dm_timer_load_start(&clkev, OMAP_TIMER_CTRL_ST,
0xffffffff - cycles, 1);
return 0;
@@ -104,16 +109,16 @@
{
u32 period;
- __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate);
+ __omap_dm_timer_stop(&clkev, 1, clkev.rate);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
period = clkev.rate / HZ;
period -= 1;
/* Looks like we need to first set the load value separately */
- __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG,
+ __omap_dm_timer_write(&clkev, OMAP_TIMER_LOAD_REG,
0xffffffff - period, 1);
- __omap_dm_timer_load_start(clkev.io_base,
+ __omap_dm_timer_load_start(&clkev,
OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST,
0xffffffff - period, 1);
break;
@@ -189,7 +194,8 @@
clk_put(src);
}
}
- __omap_dm_timer_reset(timer->io_base, 1, 1);
+ __omap_dm_timer_init_regs(timer);
+ __omap_dm_timer_reset(timer, 1, 1);
timer->posted = 1;
timer->rate = clk_get_rate(timer->fclk);
@@ -210,7 +216,7 @@
omap2_gp_timer_irq.dev_id = (void *)&clkev;
setup_irq(clkev.irq, &omap2_gp_timer_irq);
- __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW);
+ __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
clockevent_gpt.shift);
@@ -251,7 +257,7 @@
static DEFINE_CLOCK_DATA(cd);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
- return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1);
+ return (cycle_t)__omap_dm_timer_read_counter(&clksrc, 1);
}
static struct clocksource clocksource_gpt = {
@@ -266,7 +272,7 @@
{
u32 cyc;
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
update_sched_clock(&cd, cyc, (u32)~0);
}
@@ -276,7 +282,7 @@
u32 cyc = 0;
if (clksrc.reserved)
- cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1);
+ cyc = __omap_dm_timer_read_counter(&clksrc, 1);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
@@ -293,7 +299,7 @@
pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
gptimer_id, clksrc.rate);
- __omap_dm_timer_load_start(clksrc.io_base,
+ __omap_dm_timer_load_start(&clksrc,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
@@ -341,3 +347,167 @@
}
OMAP_SYS_TIMER(4)
#endif
+
+/**
+ * omap2_dm_timer_set_src - change the timer input clock source
+ * @pdev: timer platform device pointer
+ * @source: array index of parent clock source
+ */
+static int omap2_dm_timer_set_src(struct platform_device *pdev, int source)
+{
+ int ret;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
+ struct clk *fclk, *parent;
+ char *parent_name = NULL;
+
+ fclk = clk_get(&pdev->dev, "fck");
+ if (IS_ERR_OR_NULL(fclk)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() FAILED\n",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "sys_ck";
+ break;
+
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "32k_ck";
+ break;
+
+ case OMAP_TIMER_SRC_EXT_CLK:
+ if (pdata->timer_ip_version == OMAP_TIMER_IP_VERSION_1) {
+ parent_name = "alt_ck";
+ break;
+ }
+ dev_err(&pdev->dev, "%s: %d: invalid clk src.\n",
+ __func__, __LINE__);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ parent = clk_get(&pdev->dev, parent_name);
+ if (IS_ERR_OR_NULL(parent)) {
+ dev_err(&pdev->dev, "%s: %d: clk_get() %s FAILED\n",
+ __func__, __LINE__, parent_name);
+ clk_put(fclk);
+ return -EINVAL;
+ }
+
+ ret = clk_set_parent(fclk, parent);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(&pdev->dev, "%s: clk_set_parent() to %s FAILED\n",
+ __func__, parent_name);
+ ret = -EINVAL;
+ }
+
+ clk_put(parent);
+ clk_put(fclk);
+
+ return ret;
+}
+
+struct omap_device_pm_latency omap2_dmtimer_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
+/**
+ * omap_timer_init - build and register timer device with an
+ * associated timer hwmod
+ * @oh: timer hwmod pointer to be used to build timer device
+ * @user: parameter that can be passed from calling hwmod API
+ *
+ * Called by omap_hwmod_for_each_by_class to register each of the timer
+ * devices present in the system. The number of timer devices is known
+ * by parsing through the hwmod database for a given class name. At the
+ * end of function call memory is allocated for timer device and it is
+ * registered to the framework ready to be proved by the driver.
+ */
+static int __init omap_timer_init(struct omap_hwmod *oh, void *unused)
+{
+ int id;
+ int ret = 0;
+ char *name = "omap_timer";
+ struct dmtimer_platform_data *pdata;
+ struct platform_device *pdev;
+ struct omap_timer_capability_dev_attr *timer_dev_attr;
+ struct powerdomain *pwrdm;
+
+ pr_debug("%s: %s\n", __func__, oh->name);
+
+ /* on secure device, do not register secure timer */
+ timer_dev_attr = oh->dev_attr;
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP && timer_dev_attr)
+ if (timer_dev_attr->timer_capability == OMAP_TIMER_SECURE)
+ return ret;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s: No memory for [%s]\n", __func__, oh->name);
+ return -ENOMEM;
+ }
+
+ /*
+ * Extract the IDs from name field in hwmod database
+ * and use the same for constructing ids' for the
+ * timer devices. In a way, we are avoiding usage of
+ * static variable witin the function to do the same.
+ * CAUTION: We have to be careful and make sure the
+ * name in hwmod database does not change in which case
+ * we might either make corresponding change here or
+ * switch back static variable mechanism.
+ */
+ sscanf(oh->name, "timer%2d", &id);
+
+ pdata->set_timer_src = omap2_dm_timer_set_src;
+ pdata->timer_ip_version = oh->class->rev;
+
+ /* Mark clocksource and clockevent timers as reserved */
+ if ((sys_timer_reserved >> (id - 1)) & 0x1)
+ pdata->reserved = 1;
+
+ pwrdm = omap_hwmod_get_pwrdm(oh);
+ pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
+#ifdef CONFIG_PM
+ pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
+#endif
+ pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata),
+ omap2_dmtimer_latency,
+ ARRAY_SIZE(omap2_dmtimer_latency),
+ 0);
+
+ if (IS_ERR(pdev)) {
+ pr_err("%s: Can't build omap_device for %s: %s.\n",
+ __func__, name, oh->name);
+ ret = -EINVAL;
+ }
+
+ kfree(pdata);
+
+ return ret;
+}
+
+/**
+ * omap2_dm_timer_init - top level regular device initialization
+ *
+ * Uses dedicated hwmod api to parse through hwmod database for
+ * given class name and then build and register the timer device.
+ */
+static int __init omap2_dm_timer_init(void)
+{
+ int ret;
+
+ ret = omap_hwmod_for_each_by_class("timer", omap_timer_init, NULL);
+ if (unlikely(ret)) {
+ pr_err("%s: device registration failed.\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+arch_initcall(omap2_dm_timer_init);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 19e4dac..47fb5d6 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,14 +60,6 @@
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static struct omap_device_pm_latency omap_musb_latency[] = {
- {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
{
switch (board_data->interface_type) {
@@ -115,7 +107,6 @@
void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
{
struct omap_hwmod *oh;
- struct omap_device *od;
struct platform_device *pdev;
struct device *dev;
int bus_id = -1;
@@ -145,22 +136,19 @@
name = "musb-omap2430";
}
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return;
- }
+ oh = omap_hwmod_lookup(oh_name);
+ if (WARN(!oh, "%s: could not find omap_hwmod for %s\n",
+ __func__, oh_name))
+ return;
- od = omap_device_build(name, bus_id, oh, &musb_plat,
- sizeof(musb_plat), omap_musb_latency,
- ARRAY_SIZE(omap_musb_latency), false);
- if (IS_ERR(od)) {
+ pdev = omap_device_build(name, bus_id, oh, &musb_plat,
+ sizeof(musb_plat), NULL, 0, false);
+ if (IS_ERR(pdev)) {
pr_err("Could not build omap_device for %s %s\n",
name, oh_name);
return;
}
- pdev = &od->pdev;
dev = &pdev->dev;
get_device(dev);
dev->dma_mask = &musb_dmamask;
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
new file mode 100644
index 0000000..031d116
--- /dev/null
+++ b/arch/arm/mach-omap2/vc.c
@@ -0,0 +1,367 @@
+/*
+ * OMAP Voltage Controller (VC) interface
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+
+#include "voltage.h"
+#include "vc.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+/**
+ * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
+ * @sa: bit for slave address
+ * @rav: bit for voltage configuration register
+ * @rac: bit for command configuration register
+ * @racen: enable bit for RAC
+ * @cmd: bit for command value set selection
+ *
+ * Channel configuration bits, common for OMAP3+
+ * OMAP3 register: PRM_VC_CH_CONF
+ * OMAP4 register: PRM_VC_CFG_CHANNEL
+ * OMAP5 register: PRM_VC_SMPS_<voltdm>_CONFIG
+ */
+struct omap_vc_channel_cfg {
+ u8 sa;
+ u8 rav;
+ u8 rac;
+ u8 racen;
+ u8 cmd;
+};
+
+static struct omap_vc_channel_cfg vc_default_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(1),
+ .rac = BIT(2),
+ .racen = BIT(3),
+ .cmd = BIT(4),
+};
+
+/*
+ * On OMAP3+, all VC channels have the above default bitfield
+ * configuration, except the OMAP4 MPU channel. This appears
+ * to be a freak accident as every other VC channel has the
+ * default configuration, thus creating a mutant channel config.
+ */
+static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
+ .sa = BIT(0),
+ .rav = BIT(2),
+ .rac = BIT(3),
+ .racen = BIT(4),
+ .cmd = BIT(1),
+};
+
+static struct omap_vc_channel_cfg *vc_cfg_bits;
+#define CFG_CHANNEL_MASK 0x1f
+
+/**
+ * omap_vc_config_channel - configure VC channel to PMIC mappings
+ * @voltdm: pointer to voltagdomain defining the desired VC channel
+ *
+ * Configures the VC channel to PMIC mappings for the following
+ * PMIC settings
+ * - i2c slave address (SA)
+ * - voltage configuration address (RAV)
+ * - command configuration address (RAC) and enable bit (RACEN)
+ * - command values for ON, ONLP, RET and OFF (CMD)
+ *
+ * This function currently only allows flexible configuration of the
+ * non-default channel. Starting with OMAP4, there are more than 2
+ * channels, with one defined as the default (on OMAP4, it's MPU.)
+ * Only the non-default channel can be configured.
+ */
+static int omap_vc_config_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+
+ /*
+ * For default channel, the only configurable bit is RACEN.
+ * All others must stay at zero (see function comment above.)
+ */
+ if (vc->flags & OMAP_VC_CHANNEL_DEFAULT)
+ vc->cfg_channel &= vc_cfg_bits->racen;
+
+ voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift,
+ vc->cfg_channel << vc->cfg_channel_sa_shift,
+ vc->cfg_channel_reg);
+
+ return 0;
+}
+
+/* Voltage scale and accessory APIs */
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 vc_cmdval;
+
+ /* Check if sufficient pmic info is available for this vdd */
+ if (!voltdm->pmic) {
+ pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ if (!voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC function to convert voltage in uV to"
+ "vsel not registered. Hence unable to scale voltage"
+ "for vdd_%s\n", __func__, voltdm->name);
+ return -ENODATA;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ *target_vsel = voltdm->pmic->uv_to_vsel(target_volt);
+ *current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt);
+
+ /* Setting the ON voltage to the new target voltage */
+ vc_cmdval = voltdm->read(vc->cmdval_reg);
+ vc_cmdval &= ~vc->common->cmd_on_mask;
+ vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
+ voltdm->write(vc_cmdval, vc->cmdval_reg);
+
+ omap_vp_update_errorgain(voltdm, target_volt);
+
+ return 0;
+}
+
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel)
+{
+ u32 smps_steps = 0, smps_delay = 0;
+
+ smps_steps = abs(target_vsel - current_vsel);
+ /* SMPS slew rate / step size. 2us added as buffer. */
+ smps_delay = ((smps_steps * voltdm->pmic->step_size) /
+ voltdm->pmic->slew_rate) + 2;
+ udelay(smps_delay);
+}
+
+/* vc_bypass_scale - VC bypass method of voltage scaling */
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u32 loop_cnt = 0, retries_cnt = 0;
+ u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
+ u8 target_vsel, current_vsel;
+ int ret;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ vc_valid = vc->common->valid;
+ vc_bypass_val_reg = vc->common->bypass_val_reg;
+ vc_bypass_value = (target_vsel << vc->common->data_shift) |
+ (vc->volt_reg_addr << vc->common->regaddr_shift) |
+ (vc->i2c_slave_addr << vc->common->slaveaddr_shift);
+
+ voltdm->write(vc_bypass_value, vc_bypass_val_reg);
+ voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg);
+
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ /*
+ * Loop till the bypass command is acknowledged from the SMPS.
+ * NOTE: This is legacy code. The loop count and retry count needs
+ * to be revisited.
+ */
+ while (!(vc_bypass_value & vc_valid)) {
+ loop_cnt++;
+
+ if (retries_cnt > 10) {
+ pr_warning("%s: Retry count exceeded\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ if (loop_cnt > 50) {
+ retries_cnt++;
+ loop_cnt = 0;
+ udelay(10);
+ }
+ vc_bypass_value = voltdm->read(vc_bypass_val_reg);
+ }
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+ return 0;
+}
+
+static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
+{
+ /*
+ * Voltage Manager FSM parameters init
+ * XXX This data should be passed in from the board file
+ */
+ voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
+ voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
+ voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
+}
+
+static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+
+ if (is_initialized)
+ return;
+
+ omap3_vfsm_init(voltdm);
+
+ is_initialized = true;
+}
+
+
+/* OMAP4 specific voltage init functions */
+static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
+{
+ static bool is_initialized;
+ u32 vc_val;
+
+ if (is_initialized)
+ return;
+
+ /* XXX These are magic numbers and do not belong! */
+ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
+ voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+
+ is_initialized = true;
+}
+
+/**
+ * omap_vc_i2c_init - initialize I2C interface to PMIC
+ * @voltdm: voltage domain containing VC data
+ *
+ * Use PMIC supplied seetings for I2C high-speed mode and
+ * master code (if set) and program the VC I2C configuration
+ * register.
+ *
+ * The VC I2C configuration is common to all VC channels,
+ * so this function only configures I2C for the first VC
+ * channel registers. All other VC channels will use the
+ * same configuration.
+ */
+static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ static bool initialized;
+ static bool i2c_high_speed;
+ u8 mcode;
+
+ if (initialized) {
+ if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
+ pr_warn("%s: I2C config for all channels must match.",
+ __func__);
+ return;
+ }
+
+ i2c_high_speed = voltdm->pmic->i2c_high_speed;
+ if (i2c_high_speed)
+ voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_hsen_mask,
+ vc->common->i2c_cfg_reg);
+
+ mcode = voltdm->pmic->i2c_mcode;
+ if (mcode)
+ voltdm->rmw(vc->common->i2c_mcode_mask,
+ mcode << __ffs(vc->common->i2c_mcode_mask),
+ vc->common->i2c_cfg_reg);
+
+ initialized = true;
+}
+
+void __init omap_vc_init_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_channel *vc = voltdm->vc;
+ u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
+ u32 val;
+
+ if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: PMIC info requried to configure vc for"
+ "vdd_%s not populated.Hence cannot initialize vc\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vc->cfg_channel = 0;
+ if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT)
+ vc_cfg_bits = &vc_mutant_channel_cfg;
+ else
+ vc_cfg_bits = &vc_default_channel_cfg;
+
+ /* get PMIC/board specific settings */
+ vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
+ vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
+ vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
+ vc->setup_time = voltdm->pmic->volt_setup_time;
+
+ /* Configure the i2c slave address for this VC */
+ voltdm->rmw(vc->smps_sa_mask,
+ vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
+ vc->smps_sa_reg);
+ vc->cfg_channel |= vc_cfg_bits->sa;
+
+ /*
+ * Configure the PMIC register addresses.
+ */
+ voltdm->rmw(vc->smps_volra_mask,
+ vc->volt_reg_addr << __ffs(vc->smps_volra_mask),
+ vc->smps_volra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rav;
+
+ if (vc->cmd_reg_addr) {
+ voltdm->rmw(vc->smps_cmdra_mask,
+ vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
+ vc->smps_cmdra_reg);
+ vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
+ }
+
+ /* Set up the on, inactive, retention and off voltage */
+ on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
+ onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
+ ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
+ off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
+ val = ((on_vsel << vc->common->cmd_on_shift) |
+ (onlp_vsel << vc->common->cmd_onlp_shift) |
+ (ret_vsel << vc->common->cmd_ret_shift) |
+ (off_vsel << vc->common->cmd_off_shift));
+ voltdm->write(val, vc->cmdval_reg);
+ vc->cfg_channel |= vc_cfg_bits->cmd;
+
+ /* Channel configuration */
+ omap_vc_config_channel(voltdm);
+
+ /* Configure the setup times */
+ voltdm->rmw(voltdm->vfsm->voltsetup_mask,
+ vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
+ voltdm->vfsm->voltsetup_reg);
+
+ omap_vc_i2c_init(voltdm);
+
+ if (cpu_is_omap34xx())
+ omap3_vc_init_channel(voltdm);
+ else if (cpu_is_omap44xx())
+ omap4_vc_init_channel(voltdm);
+}
+
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index e776777..478bf6b 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -19,12 +19,12 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
/**
- * struct omap_vc_common_data - per-VC register/bitfield data
+ * struct omap_vc_common - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
- * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
- * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
* @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
* @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
@@ -33,15 +33,16 @@
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
+ * @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
+ * @i2c_mcode_mask: MCODE field mask for I2C config register
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
-struct omap_vc_common_data {
+struct omap_vc_common {
u32 cmd_on_mask;
u32 valid;
- u8 smps_sa_reg;
- u8 smps_volra_reg;
u8 bypass_val_reg;
u8 data_shift;
u8 slaveaddr_shift;
@@ -50,34 +51,75 @@
u8 cmd_onlp_shift;
u8 cmd_ret_shift;
u8 cmd_off_shift;
+ u8 i2c_cfg_reg;
+ u8 i2c_cfg_hsen_mask;
+ u8 i2c_mcode_mask;
};
+/* omap_vc_channel.flags values */
+#define OMAP_VC_CHANNEL_DEFAULT BIT(0)
+#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1)
+
/**
- * struct omap_vc_instance_data - VC per-instance data
- * @vc_common: pointer to VC common data for this platform
- * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register
- * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
- * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register
- * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register
+ * struct omap_vc_channel - VC per-instance data
+ * @i2c_slave_addr: I2C slave address of PMIC for this VC channel
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command configuration register address
+ * @setup_time: setup time (in sys_clk cycles) of regulator for this channel
+ * @cfg_channel: current value of VC channel configuration register
+ * @i2c_high_speed: whether or not to use I2C high-speed mode
*
- * XXX It is not necessary to have both a *_mask and a *_shift -
- * remove one
+ * @common: pointer to VC common data for this platform
+ * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
+ * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
+ * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
+ * @cmdval_reg: register for on/ret/off voltage level values for this channel
+ * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
+ * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
+ * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
+ * @cfg_channel_reg: VC channel configuration register
+ * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
+ * @flags: VC channel-specific flags (optional)
*/
-struct omap_vc_instance_data {
- const struct omap_vc_common_data *vc_common;
+struct omap_vc_channel {
+ /* channel state */
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
+ u16 setup_time;
+ u8 cfg_channel;
+ bool i2c_high_speed;
+
+ /* register access data */
+ const struct omap_vc_common *common;
u32 smps_sa_mask;
u32 smps_volra_mask;
+ u32 smps_cmdra_mask;
u8 cmdval_reg;
- u8 smps_sa_shift;
- u8 smps_volra_shift;
+ u8 smps_sa_reg;
+ u8 smps_volra_reg;
+ u8 smps_cmdra_reg;
+ u8 cfg_channel_reg;
+ u8 cfg_channel_sa_shift;
+ u8 flags;
};
-extern struct omap_vc_instance_data omap3_vc1_data;
-extern struct omap_vc_instance_data omap3_vc2_data;
+extern struct omap_vc_channel omap3_vc_mpu;
+extern struct omap_vc_channel omap3_vc_core;
-extern struct omap_vc_instance_data omap4_vc_mpu_data;
-extern struct omap_vc_instance_data omap4_vc_iva_data;
-extern struct omap_vc_instance_data omap4_vc_core_data;
+extern struct omap_vc_channel omap4_vc_mpu;
+extern struct omap_vc_channel omap4_vc_iva;
+extern struct omap_vc_channel omap4_vc_core;
+
+void omap_vc_init_channel(struct voltagedomain *voltdm);
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel);
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel);
+int omap_vc_bypass_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index f37dc4b..cfe348e 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -29,9 +29,7 @@
* VC data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static struct omap_vc_common_data omap3_vc_common = {
- .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+static struct omap_vc_common omap3_vc_common = {
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
.data_shift = OMAP3430_DATA_SHIFT,
.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT,
@@ -42,22 +40,33 @@
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
+ .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
+ .i2c_mcode_mask = OMAP3430_MCODE_MASK,
};
-struct omap_vc_instance_data omap3_vc1_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_mpu = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
- .smps_volra_shift = OMAP3430_VOLRA0_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA0_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA0_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
};
-struct omap_vc_instance_data omap3_vc2_data = {
- .vc_common = &omap3_vc_common,
+struct omap_vc_channel omap3_vc_core = {
+ .common = &omap3_vc_common,
+ .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
+ .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET,
+ .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
- .smps_volra_shift = OMAP3430_VOLRA1_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA1_MASK,
+ .smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
+ .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
};
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index a98da8d..2740a96 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -30,9 +30,7 @@
* VC data common to 44xx chips
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
-static const struct omap_vc_common_data omap4_vc_common = {
- .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
- .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+static const struct omap_vc_common omap4_vc_common = {
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
.data_shift = OMAP4430_DATA_SHIFT,
.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT,
@@ -43,33 +41,49 @@
.cmd_onlp_shift = OMAP4430_ONLP_SHIFT,
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
+ .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
+ .i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
/* VC instance data for each controllable voltage line */
-struct omap_vc_instance_data omap4_vc_mpu_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_mpu = {
+ .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT,
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_iva_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_iva = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT,
};
-struct omap_vc_instance_data omap4_vc_core_data = {
- .vc_common = &omap4_vc_common,
+struct omap_vc_channel omap4_vc_core = {
+ .common = &omap4_vc_common,
+ .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
+ .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
+ .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET,
+ .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
- .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
+ .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK,
+ .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT,
};
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 9ef3789..64070ac 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -21,10 +21,10 @@
#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/clk.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <plat/common.h>
@@ -36,839 +36,88 @@
#include "control.h"
#include "voltage.h"
+#include "powerdomain.h"
#include "vc.h"
#include "vp.h"
-#define VOLTAGE_DIR_SIZE 16
-
-
-static struct omap_vdd_info **vdd_info;
-
-/*
- * Number of scalable voltage domains.
- */
-static int nr_scalable_vdd;
-
-/* XXX document */
-static s16 prm_mod_offs;
-static s16 prm_irqst_ocp_mod_offs;
-
-static struct dentry *voltage_dir;
-
-/* Init function pointers */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt);
-
-static u32 omap3_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap2_prm_read_mod_reg(mod, offset);
-}
-
-static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap2_prm_write_mod_reg(val, mod, offset);
-}
-
-static u32 omap4_voltage_read_reg(u16 mod, u8 offset)
-{
- return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
- mod, offset);
-}
-
-static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset)
-{
- omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset);
-}
-
-static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
-{
- char *sys_ck_name;
- struct clk *sys_ck;
- u32 sys_clk_speed, timeout_val, waittime;
-
- /*
- * XXX Clockfw should handle this, or this should be in a
- * struct record
- */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- sys_ck_name = "sys_ck";
- else if (cpu_is_omap44xx())
- sys_ck_name = "sys_clkin_ck";
- else
- return -EINVAL;
-
- /*
- * Sys clk rate is require to calculate vp timeout value and
- * smpswaittimemin and smpswaittimemax.
- */
- sys_ck = clk_get(NULL, sys_ck_name);
- if (IS_ERR(sys_ck)) {
- pr_warning("%s: Could not get the sys clk to calculate"
- "various vdd_%s params\n", __func__, vdd->voltdm.name);
- return -EINVAL;
- }
- sys_clk_speed = clk_get_rate(sys_ck);
- clk_put(sys_ck);
- /* Divide to avoid overflow */
- sys_clk_speed /= 1000;
-
- /* Generic voltage parameters */
- vdd->volt_scale = vp_forceupdate_scale_voltage;
- vdd->vp_enabled = false;
-
- vdd->vp_rt_data.vpconfig_erroroffset =
- (vdd->pmic_info->vp_erroroffset <<
- vdd->vp_data->vp_common->vpconfig_erroroffset_shift);
-
- timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
- vdd->vp_rt_data.vlimitto_timeout = timeout_val;
- vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
- vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
-
- waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
- sys_clk_speed) / 1000;
- vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime;
- vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime;
- vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
- vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
-
- return 0;
-}
-
-/* Voltage debugfs support */
-static int vp_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
- u8 vsel;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info->vsel_to_uv) {
- pr_warning("PMIC function to convert vsel to voltage"
- "in uV not registerd\n");
- return -EINVAL;
- }
-
- *val = vdd->pmic_info->vsel_to_uv(vsel);
- return 0;
-}
-
-static int nom_volt_debug_get(void *data, u64 *val)
-{
- struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
-
- if (!vdd) {
- pr_warning("Wrong paramater passed\n");
- return -EINVAL;
- }
-
- *val = omap_voltage_get_nom_volt(&vdd->voltdm);
-
- return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n");
-DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
- "%llu\n");
-static void vp_latch_vsel(struct omap_vdd_info *vdd)
-{
- u32 vpconfig;
- unsigned long uvdc;
- char vsel;
-
- uvdc = omap_voltage_get_nom_volt(&vdd->voltdm);
- if (!uvdc) {
- pr_warning("%s: unable to find current voltage for vdd_%s\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_warning("%s: PMIC function to convert voltage in uV to"
- " vsel not registered\n", __func__);
- return;
- }
-
- vsel = vdd->pmic_info->uv_to_vsel(uvdc);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask |
- vdd->vp_data->vp_common->vpconfig_initvdd);
- vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift;
-
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd),
- prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Clear initVDD copy trigger bit */
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-}
-
-/* Generic voltage init functions */
-static void __init vp_init(struct omap_vdd_info *vdd)
-{
- u32 vp_val;
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- vp_val = vdd->vp_rt_data.vpconfig_erroroffset |
- (vdd->vp_rt_data.vpconfig_errorgain <<
- vdd->vp_data->vp_common->vpconfig_errorgain_shift) |
- vdd->vp_data->vp_common->vpconfig_timeouten;
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig);
-
- vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin <<
- vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) |
- (vdd->vp_rt_data.vstepmin_stepmin <<
- vdd->vp_data->vp_common->vstepmin_stepmin_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin);
-
- vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax <<
- vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) |
- (vdd->vp_rt_data.vstepmax_stepmax <<
- vdd->vp_data->vp_common->vstepmax_stepmax_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax);
-
- vp_val = ((vdd->vp_rt_data.vlimitto_vddmax <<
- vdd->vp_data->vp_common->vlimitto_vddmax_shift) |
- (vdd->vp_rt_data.vlimitto_vddmin <<
- vdd->vp_data->vp_common->vlimitto_vddmin_shift) |
- (vdd->vp_rt_data.vlimitto_timeout <<
- vdd->vp_data->vp_common->vlimitto_timeout_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto);
-}
-
-static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
-{
- char *name;
-
- name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL);
- if (!name) {
- pr_warning("%s: Unable to allocate memory for debugfs"
- " directory name for vdd_%s",
- __func__, vdd->voltdm.name);
- return;
- }
- strcpy(name, "vdd_");
- strcat(name, vdd->voltdm.name);
-
- vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
- kfree(name);
- if (IS_ERR(vdd->debug_dir)) {
- pr_warning("%s: Unable to create debugfs directory for"
- " vdd_%s\n", __func__, vdd->voltdm.name);
- vdd->debug_dir = NULL;
- return;
- }
-
- (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vpconfig_errorgain));
- (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_smpswaittimemin));
- (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmin_stepmin));
- (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO,
- vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_smpswaittimemax));
- (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vstepmax_stepmax));
- (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmax));
- (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_vddmin));
- (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir,
- &(vdd->vp_rt_data.vlimitto_timeout));
- (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir,
- (void *) vdd, &vp_volt_debug_fops);
- (void) debugfs_create_file("curr_nominal_volt", S_IRUGO,
- vdd->debug_dir, (void *) vdd,
- &nom_volt_debug_fops);
-}
-
-/* Voltage scale and accessory APIs */
-static int _pre_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
-{
- struct omap_volt_data *volt_data;
- const struct omap_vc_common_data *vc_common;
- const struct omap_vp_common_data *vp_common;
- u32 vc_cmdval, vp_errgain_val;
-
- vc_common = vdd->vc_data->vc_common;
- vp_common = vdd->vp_data->vp_common;
-
- /* Check if suffiecient pmic info is available for this vdd */
- if (!vdd->pmic_info) {
- pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- if (!vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC function to convert voltage in uV to"
- "vsel not registered. Hence unable to scale voltage"
- "for vdd_%s\n", __func__, vdd->voltdm.name);
- return -ENODATA;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return -EINVAL;
- }
-
- /* Get volt_data corresponding to target_volt */
- volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt);
- if (IS_ERR(volt_data))
- volt_data = NULL;
-
- *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- /* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg);
- vc_cmdval &= ~vc_common->cmd_on_mask;
- vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /* Setting vp errorgain based on the voltage */
- if (volt_data) {
- vp_errgain_val = vdd->read_reg(prm_mod_offs,
- vdd->vp_data->vpconfig);
- vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
- vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
- vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
- vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, prm_mod_offs,
- vdd->vp_data->vpconfig);
- }
-
- return 0;
-}
-
-static void _post_volt_scale(struct omap_vdd_info *vdd,
- unsigned long target_volt, u8 target_vsel, u8 current_vsel)
-{
- u32 smps_steps = 0, smps_delay = 0;
-
- smps_steps = abs(target_vsel - current_vsel);
- /* SMPS slew rate / step size. 2us added as buffer. */
- smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
- vdd->pmic_info->slew_rate) + 2;
- udelay(smps_delay);
-
- vdd->curr_volt = target_volt;
-}
-
-/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
-static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 loop_cnt = 0, retries_cnt = 0;
- u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
- u8 target_vsel, current_vsel;
- int ret;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- vc_valid = vdd->vc_data->vc_common->valid;
- vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg;
- vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) |
- (vdd->pmic_info->pmic_reg <<
- vdd->vc_data->vc_common->regaddr_shift) |
- (vdd->pmic_info->i2c_slave_addr <<
- vdd->vc_data->vc_common->slaveaddr_shift);
-
- vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs,
- vc_bypass_val_reg);
-
- vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg);
- /*
- * Loop till the bypass command is acknowledged from the SMPS.
- * NOTE: This is legacy code. The loop count and retry count needs
- * to be revisited.
- */
- while (!(vc_bypass_value & vc_valid)) {
- loop_cnt++;
-
- if (retries_cnt > 10) {
- pr_warning("%s: Retry count exceeded\n", __func__);
- return -ETIMEDOUT;
- }
-
- if (loop_cnt > 50) {
- retries_cnt++;
- loop_cnt = 0;
- udelay(10);
- }
- vc_bypass_value = vdd->read_reg(prm_mod_offs,
- vc_bypass_val_reg);
- }
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
- return 0;
-}
-
-/* VP force update method of voltage scaling */
-static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
- unsigned long target_volt)
-{
- u32 vpconfig;
- u8 target_vsel, current_vsel, prm_irqst_reg;
- int ret, timeout = 0;
-
- ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg;
-
- /*
- * Clear all pending TransactionDone interrupt/status. Typical latency
- * is <3us
- */
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
- if (timeout >= VP_TRANXDONE_TIMEOUT) {
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
- "Voltage change aborted", __func__, vdd->voltdm.name);
- return -ETIMEDOUT;
- }
-
- /* Configure for VP-Force Update */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd |
- vdd->vp_data->vp_common->vpconfig_forceupdate |
- vdd->vp_data->vp_common->vpconfig_initvoltage_mask);
- vpconfig |= ((target_vsel <<
- vdd->vp_data->vp_common->vpconfig_initvoltage_shift));
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Trigger initVDD value copy to voltage processor */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /* Force update of voltage */
- vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for TransactionDone. Typical latency is <200us.
- * Depends on SMPSWAITTIMEMIN/MAX and voltage change
- */
- timeout = 0;
- omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status),
- VP_TRANXDONE_TIMEOUT, timeout);
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
- "TRANXDONE never got set after the voltage update\n",
- __func__, vdd->voltdm.name);
-
- _post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
-
- /*
- * Disable TransactionDone interrupt , clear all status, clear
- * control registers
- */
- timeout = 0;
- while (timeout++ < VP_TRANXDONE_TIMEOUT) {
- vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
- vdd->vp_data->prm_irqst_data->tranxdone_status))
- break;
- udelay(1);
- }
-
- if (timeout >= VP_TRANXDONE_TIMEOUT)
- pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
- "to clear the TRANXDONE status\n",
- __func__, vdd->voltdm.name);
-
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear initVDD copy trigger bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- /* Clear force bit */
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- return 0;
-}
-
-static void __init omap3_vfsm_init(struct omap_vdd_info *vdd)
-{
- /*
- * Voltage Manager FSM parameters init
- * XXX This data should be passed in from the board file
- */
- vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs,
- OMAP3_PRM_VOLTSETUP2_OFFSET);
-}
-
-static void __init omap3_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* Set up the on, inactive, retention and off voltage */
- on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
- onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
- ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
- off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
- vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) |
- (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
- (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
- (off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg);
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs,
- OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs,
- OMAP3_PRM_VC_I2C_CFG_OFFSET);
-
- omap3_vfsm_init(vdd);
-
- is_initialized = true;
-}
-
-
-/* OMAP4 specific voltage init functions */
-static void __init omap4_vc_init(struct omap_vdd_info *vdd)
-{
- static bool is_initialized;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* TODO: Configure setup times and CMD_VAL values*/
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
- OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
- OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
-
- /* XXX These are magic numbers and do not belong! */
- vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
-
- is_initialized = true;
-}
-
-static void __init omap_vc_init(struct omap_vdd_info *vdd)
-{
- u32 vc_val;
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC info requried to configure vc for"
- "vdd_%s not populated.Hence cannot initialize vc\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, vdd->voltdm.name);
- return;
- }
-
- /* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
- vc_val &= ~vdd->vc_data->smps_sa_mask;
- vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_sa_reg);
-
- /* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
- vc_val &= ~vdd->vc_data->smps_volra_mask;
- vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
- vdd->vc_data->vc_common->smps_volra_reg);
-
- /* Configure the setup times */
- vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg);
- vc_val &= ~vdd->vfsm->voltsetup_mask;
- vc_val |= vdd->pmic_info->volt_setup_time <<
- vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg);
-
- if (cpu_is_omap34xx())
- omap3_vc_init(vdd);
- else if (cpu_is_omap44xx())
- omap4_vc_init(vdd);
-}
-
-static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd)
-{
- int ret = -EINVAL;
-
- if (!vdd->pmic_info) {
- pr_err("%s: PMIC info requried to configure vdd_%s not"
- "populated.Hence cannot initialize vdd_%s\n",
- __func__, vdd->voltdm.name, vdd->voltdm.name);
- goto ovdc_out;
- }
-
- if (IS_ERR_VALUE(_config_common_vdd_data(vdd)))
- goto ovdc_out;
-
- if (cpu_is_omap34xx()) {
- vdd->read_reg = omap3_voltage_read_reg;
- vdd->write_reg = omap3_voltage_write_reg;
- ret = 0;
- } else if (cpu_is_omap44xx()) {
- vdd->read_reg = omap4_voltage_read_reg;
- vdd->write_reg = omap4_voltage_write_reg;
- ret = 0;
- }
-
-ovdc_out:
- return ret;
-}
+static LIST_HEAD(voltdm_list);
/* Public functions */
/**
- * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
- * @voltdm: pointer to the VDD for which current voltage info is needed
+ * voltdm_get_voltage() - Gets the current non-auto-compensated voltage
+ * @voltdm: pointer to the voltdm for which current voltage info is needed
*
- * API to get the current non-auto-compensated voltage for a VDD.
- * Returns 0 in case of error else returns the current voltage for the VDD.
+ * API to get the current non-auto-compensated voltage for a voltage domain.
+ * Returns 0 in case of error else returns the current voltage.
*/
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return 0;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->curr_volt;
+ return voltdm->nominal_volt;
}
/**
- * omap_vp_get_curr_volt() - API to get the current vp voltage.
- * @voltdm: pointer to the VDD.
- *
- * This API returns the current voltage for the specified voltage processor
- */
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u8 curr_vsel;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return 0;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg) {
- pr_err("%s: No read API for reading vdd_%s regs\n",
- __func__, voltdm->name);
- return 0;
- }
-
- curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
-
- if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
- pr_warning("%s: PMIC function to convert vsel to voltage"
- "in uV not registerd\n", __func__);
- return 0;
- }
-
- return vdd->pmic_info->vsel_to_uv(curr_vsel);
-}
-
-/**
- * omap_vp_enable() - API to enable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be enabled.
- *
- * This API enables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_enable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already enabled, do nothing. Return */
- if (vdd->vp_enabled)
- return;
-
- vp_latch_vsel(vdd);
-
- /* Enable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
- vdd->vp_enabled = true;
-}
-
-/**
- * omap_vp_disable() - API to disable a particular VP
- * @voltdm: pointer to the VDD whose VP is to be disabled.
- *
- * This API disables a particular voltage processor. Needed by the smartreflex
- * class drivers.
- */
-void omap_vp_disable(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
- u32 vpconfig;
- int timeout;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* If VP is already disabled, do nothing. Return */
- if (!vdd->vp_enabled) {
- pr_warning("%s: Trying to disable VP for vdd_%s when"
- "it is already disabled\n", __func__, voltdm->name);
- return;
- }
-
- /* Disable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
- vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
-
- /*
- * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
- */
- omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)),
- VP_IDLE_TIMEOUT, timeout);
-
- if (timeout >= VP_IDLE_TIMEOUT)
- pr_warning("%s: vdd_%s idle timedout\n",
- __func__, voltdm->name);
-
- vdd->vp_enabled = false;
-
- return;
-}
-
-/**
- * omap_voltage_scale_vdd() - API to scale voltage of a particular
- * voltage domain.
- * @voltdm: pointer to the VDD which is to be scaled.
- * @target_volt: The target voltage of the voltage domain
+ * voltdm_scale() - API to scale voltage of a particular voltage domain.
+ * @voltdm: pointer to the voltage domain which is to be scaled.
+ * @target_volt: The target voltage of the voltage domain
*
* This API should be called by the kernel to do the voltage scaling
- * for a particular voltage domain during dvfs or any other situation.
+ * for a particular voltage domain during DVFS.
*/
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt)
+int voltdm_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
{
- struct omap_vdd_info *vdd;
+ int ret;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_scale) {
+ if (!voltdm->scale) {
pr_err("%s: No voltage scale API registered for vdd_%s\n",
__func__, voltdm->name);
return -ENODATA;
}
- return vdd->volt_scale(vdd, target_volt);
+ ret = voltdm->scale(voltdm, target_volt);
+ if (!ret)
+ voltdm->nominal_volt = target_volt;
+
+ return ret;
}
/**
- * omap_voltage_reset() - Resets the voltage of a particular voltage domain
- * to that of the current OPP.
- * @voltdm: pointer to the VDD whose voltage is to be reset.
+ * voltdm_reset() - Resets the voltage of a particular voltage domain
+ * to that of the current OPP.
+ * @voltdm: pointer to the voltage domain whose voltage is to be reset.
*
* This API finds out the correct voltage the voltage domain is supposed
* to be at and resets the voltage to that level. Should be used especially
* while disabling any voltage compensation modules.
*/
-void omap_voltage_reset(struct voltagedomain *voltdm)
+void voltdm_reset(struct voltagedomain *voltdm)
{
- unsigned long target_uvdc;
+ unsigned long target_volt;
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- target_uvdc = omap_voltage_get_nom_volt(voltdm);
- if (!target_uvdc) {
+ target_volt = voltdm_get_voltage(voltdm);
+ if (!target_volt) {
pr_err("%s: unable to find current voltage for vdd_%s\n",
__func__, voltdm->name);
return;
}
- omap_voltage_scale_vdd(voltdm, target_uvdc);
+ voltdm_scale(voltdm, target_volt);
}
/**
@@ -884,18 +133,14 @@
*
*/
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
- struct omap_volt_data **volt_data)
+ struct omap_volt_data **volt_data)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- *volt_data = vdd->volt_data;
+ *volt_data = voltdm->volt_data;
}
/**
@@ -914,9 +159,8 @@
* domain or if there is no matching entry.
*/
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
- unsigned long volt)
+ unsigned long volt)
{
- struct omap_vdd_info *vdd;
int i;
if (!voltdm || IS_ERR(voltdm)) {
@@ -924,17 +168,15 @@
return ERR_PTR(-EINVAL);
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- if (!vdd->volt_data) {
+ if (!voltdm->volt_data) {
pr_warning("%s: voltage table does not exist for vdd_%s\n",
__func__, voltdm->name);
return ERR_PTR(-ENODATA);
}
- for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) {
- if (vdd->volt_data[i].volt_nominal == volt)
- return &vdd->volt_data[i];
+ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
+ if (voltdm->volt_data[i].volt_nominal == volt)
+ return &voltdm->volt_data[i];
}
pr_notice("%s: Unable to match the current voltage with the voltage"
@@ -947,54 +189,25 @@
* omap_voltage_register_pmic() - API to register PMIC specific data
* @voltdm: pointer to the VDD for which the PMIC specific data is
* to be registered
- * @pmic_info: the structure containing pmic info
+ * @pmic: the structure containing pmic info
*
* This API is to be called by the SOC/PMIC file to specify the
- * pmic specific info as present in omap_volt_pmic_info structure.
+ * pmic specific info as present in omap_voltdm_pmic structure.
*/
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
+ struct omap_voltdm_pmic *pmic)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return -EINVAL;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- vdd->pmic_info = pmic_info;
+ voltdm->pmic = pmic;
return 0;
}
/**
- * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory
- * corresponding to a voltage domain.
- *
- * @voltdm: pointer to the VDD whose debug directory is required.
- *
- * This API returns pointer to the debugfs directory corresponding
- * to the voltage domain. Should be used by drivers requiring to
- * add any debug entry for a particular voltage domain. Returns NULL
- * in case of error.
- */
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd;
-
- if (!voltdm || IS_ERR(voltdm)) {
- pr_warning("%s: VDD specified does not exist!\n", __func__);
- return NULL;
- }
-
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
- return vdd->debug_dir;
-}
-
-/**
* omap_change_voltscale_method() - API to change the voltage scaling method.
* @voltdm: pointer to the VDD whose voltage scaling method
* has to be changed.
@@ -1005,23 +218,19 @@
* defined in voltage.h
*/
void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method)
+ int voltscale_method)
{
- struct omap_vdd_info *vdd;
-
if (!voltdm || IS_ERR(voltdm)) {
pr_warning("%s: VDD specified does not exist!\n", __func__);
return;
}
- vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
-
switch (voltscale_method) {
case VOLTSCALE_VPFORCEUPDATE:
- vdd->volt_scale = vp_forceupdate_scale_voltage;
+ voltdm->scale = omap_vp_forceupdate_scale;
return;
case VOLTSCALE_VCBYPASS:
- vdd->volt_scale = vc_bypass_scale_voltage;
+ voltdm->scale = omap_vc_bypass_scale;
return;
default:
pr_warning("%s: Trying to change the method of voltage scaling"
@@ -1030,38 +239,6 @@
}
/**
- * omap_voltage_domain_lookup() - API to get the voltage domain pointer
- * @name: Name of the voltage domain
- *
- * This API looks up in the global vdd_info struct for the
- * existence of voltage domain <name>. If it exists, the API returns
- * a pointer to the voltage domain structure corresponding to the
- * VDD<name>. Else retuns error pointer.
- */
-struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- int i;
-
- if (!vdd_info) {
- pr_err("%s: Voltage driver init not yet happened.Faulting!\n",
- __func__);
- return ERR_PTR(-EINVAL);
- }
-
- if (!name) {
- pr_err("%s: No name to get the votage domain!\n", __func__);
- return ERR_PTR(-EINVAL);
- }
-
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (!(strcmp(name, vdd_info[i]->voltdm.name)))
- return &vdd_info[i]->voltdm;
- }
-
- return ERR_PTR(-EINVAL);
-}
-
-/**
* omap_voltage_late_init() - Init the various voltage parameters
*
* This API is to be called in the later stages of the
@@ -1070,37 +247,184 @@
*/
int __init omap_voltage_late_init(void)
{
- int i;
+ struct voltagedomain *voltdm;
- if (!vdd_info) {
+ if (list_empty(&voltdm_list)) {
pr_err("%s: Voltage driver support not added\n",
__func__);
return -EINVAL;
}
- voltage_dir = debugfs_create_dir("voltage", NULL);
- if (IS_ERR(voltage_dir))
- pr_err("%s: Unable to create voltage debugfs main dir\n",
- __func__);
- for (i = 0; i < nr_scalable_vdd; i++) {
- if (omap_vdd_data_configure(vdd_info[i]))
+ list_for_each_entry(voltdm, &voltdm_list, node) {
+ struct clk *sys_ck;
+
+ if (!voltdm->scalable)
continue;
- omap_vc_init(vdd_info[i]);
- vp_init(vdd_info[i]);
- vdd_debugfs_init(vdd_info[i]);
+
+ sys_ck = clk_get(NULL, voltdm->sys_clk.name);
+ if (IS_ERR(sys_ck)) {
+ pr_warning("%s: Could not get sys clk.\n", __func__);
+ return -EINVAL;
+ }
+ voltdm->sys_clk.rate = clk_get_rate(sys_ck);
+ WARN_ON(!voltdm->sys_clk.rate);
+ clk_put(sys_ck);
+
+ if (voltdm->vc) {
+ voltdm->scale = omap_vc_bypass_scale;
+ omap_vc_init_channel(voltdm);
+ }
+
+ if (voltdm->vp) {
+ voltdm->scale = omap_vp_forceupdate_scale;
+ omap_vp_init(voltdm);
+ }
}
return 0;
}
-/* XXX document */
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count)
+static struct voltagedomain *_voltdm_lookup(const char *name)
{
- prm_mod_offs = prm_mod;
- prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod;
- vdd_info = omap_vdd_array;
- nr_scalable_vdd = omap_vdd_count;
+ struct voltagedomain *voltdm, *temp_voltdm;
+
+ voltdm = NULL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ if (!strcmp(name, temp_voltdm->name)) {
+ voltdm = temp_voltdm;
+ break;
+ }
+ }
+
+ return voltdm;
+}
+
+/**
+ * voltdm_add_pwrdm - add a powerdomain to a voltagedomain
+ * @voltdm: struct voltagedomain * to add the powerdomain to
+ * @pwrdm: struct powerdomain * to associate with a voltagedomain
+ *
+ * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This
+ * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if
+ * presented with invalid pointers; -ENOMEM if memory could not be allocated;
+ * or 0 upon success.
+ */
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)
+{
+ if (!voltdm || !pwrdm)
+ return -EINVAL;
+
+ pr_debug("voltagedomain: associating powerdomain %s with voltagedomain "
+ "%s\n", pwrdm->name, voltdm->name);
+
+ list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list);
+
return 0;
}
+
+/**
+ * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm
+ * @voltdm: struct voltagedomain * to iterate over
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each powerdomain in the
+ * voltagedomain @voltdm. Returns -EINVAL if presented with invalid
+ * pointers; or passes along the last return value of the callback
+ * function, which should be 0 for success or anything else to
+ * indicate failure.
+ */
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm))
+{
+ struct powerdomain *pwrdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node)
+ ret = (*fn)(voltdm, pwrdm);
+
+ return ret;
+}
+
+/**
+ * voltdm_for_each - call function on each registered voltagedomain
+ * @fn: callback function *
+ *
+ * Call the supplied function @fn for each registered voltagedomain.
+ * The callback function @fn can return anything but 0 to bail out
+ * early from the iterator. Returns the last return value of the
+ * callback function, which should be 0 for success or anything else
+ * to indicate failure; or -EINVAL if the function pointer is null.
+ */
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user)
+{
+ struct voltagedomain *temp_voltdm;
+ int ret = 0;
+
+ if (!fn)
+ return -EINVAL;
+
+ list_for_each_entry(temp_voltdm, &voltdm_list, node) {
+ ret = (*fn)(temp_voltdm, user);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
+static int _voltdm_register(struct voltagedomain *voltdm)
+{
+ if (!voltdm || !voltdm->name)
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&voltdm->pwrdm_list);
+ list_add(&voltdm->node, &voltdm_list);
+
+ pr_debug("voltagedomain: registered %s\n", voltdm->name);
+
+ return 0;
+}
+
+/**
+ * voltdm_lookup - look up a voltagedomain by name, return a pointer
+ * @name: name of voltagedomain
+ *
+ * Find a registered voltagedomain by its name @name. Returns a pointer
+ * to the struct voltagedomain if found, or NULL otherwise.
+ */
+struct voltagedomain *voltdm_lookup(const char *name)
+{
+ struct voltagedomain *voltdm ;
+
+ if (!name)
+ return NULL;
+
+ voltdm = _voltdm_lookup(name);
+
+ return voltdm;
+}
+
+/**
+ * voltdm_init - set up the voltagedomain layer
+ * @voltdm_list: array of struct voltagedomain pointers to register
+ *
+ * Loop through the array of voltagedomains @voltdm_list, registering all
+ * that are available on the current CPU. If voltdm_list is supplied
+ * and not null, all of the referenced voltagedomains will be
+ * registered. No return value.
+ */
+void voltdm_init(struct voltagedomain **voltdms)
+{
+ struct voltagedomain **v;
+
+ if (voltdms) {
+ for (v = voltdms; *v; v++)
+ _voltdm_register(*v);
+ }
+}
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index e9f5408..16a1b09 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -19,6 +19,8 @@
#include "vc.h"
#include "vp.h"
+struct powerdomain;
+
/* XXX document */
#define VOLTSCALE_VPFORCEUPDATE 1
#define VOLTSCALE_VCBYPASS 2
@@ -32,29 +34,60 @@
#define OMAP3_VOLTSETUP2 0xff
/**
- * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield
+ * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield
* data
* @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
* @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
- * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register
*
* XXX What about VOLTOFFSET/VOLTCTRL?
- * XXX It is not necessary to have both a _mask and a _shift for the same
- * bitfield - remove one!
*/
-struct omap_vfsm_instance_data {
+struct omap_vfsm_instance {
u32 voltsetup_mask;
u8 voltsetup_reg;
- u8 voltsetup_shift;
};
/**
* struct voltagedomain - omap voltage domain global structure.
- * @name: Name of the voltage domain which can be used as a unique
- * identifier.
+ * @name: Name of the voltage domain which can be used as a unique identifier.
+ * @scalable: Whether or not this voltage domain is scalable
+ * @node: list_head linking all voltage domains
+ * @pwrdm_list: list_head linking all powerdomains in this voltagedomain
+ * @vc: pointer to VC channel associated with this voltagedomain
+ * @vp: pointer to VP associated with this voltagedomain
+ * @read: read a VC/VP register
+ * @write: write a VC/VP register
+ * @read: read-modify-write a VC/VP register
+ * @sys_clk: system clock name/frequency, used for various timing calculations
+ * @scale: function used to scale the voltage of the voltagedomain
+ * @nominal_volt: current nominal voltage for this voltage domain
+ * @volt_data: voltage table having the distinct voltages supported
+ * by the domain and other associated per voltage data.
*/
struct voltagedomain {
char *name;
+ bool scalable;
+ struct list_head node;
+ struct list_head pwrdm_list;
+ struct omap_vc_channel *vc;
+ const struct omap_vfsm_instance *vfsm;
+ struct omap_vp_instance *vp;
+ struct omap_voltdm_pmic *pmic;
+
+ /* VC/VP register access functions: SoC specific */
+ u32 (*read) (u8 offset);
+ void (*write) (u32 val, u8 offset);
+ u32 (*rmw)(u32 mask, u32 bits, u8 offset);
+
+ union {
+ const char *name;
+ u32 rate;
+ } sys_clk;
+
+ int (*scale) (struct voltagedomain *voltdm,
+ unsigned long target_volt);
+
+ u32 nominal_volt;
+ struct omap_volt_data *volt_data;
};
/**
@@ -77,13 +110,18 @@
};
/**
- * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
+ * @i2c_slave_addr: I2C slave address of PMIC
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
+ * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC
+ * @i2c_mcode: master code value for I2C high-speed preamble transmission
* @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
* @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
*/
-struct omap_volt_pmic_info {
+struct omap_voltdm_pmic {
int slew_rate;
int step_size;
u32 on_volt;
@@ -91,94 +129,44 @@
u32 ret_volt;
u32 off_volt;
u16 volt_setup_time;
+ u16 i2c_slave_addr;
+ u16 volt_reg_addr;
+ u16 cmd_reg_addr;
u8 vp_erroroffset;
u8 vp_vstepmin;
u8 vp_vstepmax;
u8 vp_vddmin;
u8 vp_vddmax;
u8 vp_timeout_us;
- u8 i2c_slave_addr;
- u8 pmic_reg;
+ bool i2c_high_speed;
+ u8 i2c_mcode;
unsigned long (*vsel_to_uv) (const u8 vsel);
u8 (*uv_to_vsel) (unsigned long uV);
};
-/**
- * omap_vdd_info - Per Voltage Domain info
- *
- * @volt_data : voltage table having the distinct voltages supported
- * by the domain and other associated per voltage data.
- * @pmic_info : pmic specific parameters which should be populted by
- * the pmic drivers.
- * @vp_data : the register values, shifts, masks for various
- * vp registers
- * @vp_rt_data : VP data derived at runtime, not predefined
- * @vc_data : structure containing various various vc registers,
- * shifts, masks etc.
- * @vfsm : voltage manager FSM data
- * @voltdm : pointer to the voltage domain structure
- * @debug_dir : debug directory for this voltage domain.
- * @curr_volt : current voltage for this vdd.
- * @vp_enabled : flag to keep track of whether vp is enabled or not
- * @volt_scale : API to scale the voltage of the vdd.
- */
-struct omap_vdd_info {
- struct omap_volt_data *volt_data;
- struct omap_volt_pmic_info *pmic_info;
- struct omap_vp_instance_data *vp_data;
- struct omap_vp_runtime_data vp_rt_data;
- struct omap_vc_instance_data *vc_data;
- const struct omap_vfsm_instance_data *vfsm;
- struct voltagedomain voltdm;
- struct dentry *debug_dir;
- u32 curr_volt;
- bool vp_enabled;
- u32 (*read_reg) (u16 mod, u8 offset);
- void (*write_reg) (u32 val, u16 mod, u8 offset);
- int (*volt_scale) (struct omap_vdd_info *vdd,
- unsigned long target_volt);
-};
-
-unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
-void omap_vp_enable(struct voltagedomain *voltdm);
-void omap_vp_disable(struct voltagedomain *voltdm);
-int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
- unsigned long target_volt);
-void omap_voltage_reset(struct voltagedomain *voltdm);
void omap_voltage_get_volttable(struct voltagedomain *voltdm,
struct omap_volt_data **volt_data);
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
-unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
-struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
- struct omap_vdd_info *omap_vdd_array[],
- u8 omap_vdd_count);
-#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info);
+ struct omap_voltdm_pmic *pmic);
void omap_change_voltscale_method(struct voltagedomain *voltdm,
int voltscale_method);
-/* API to get the voltagedomain pointer */
-struct voltagedomain *omap_voltage_domain_lookup(char *name);
-
int omap_voltage_late_init(void);
-#else
-static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
- struct omap_volt_pmic_info *pmic_info)
-{
- return -EINVAL;
-}
-static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
- int voltscale_method) {}
-static inline int omap_voltage_late_init(void)
-{
- return -EINVAL;
-}
-static inline struct voltagedomain *omap_voltage_domain_lookup(char *name)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
+extern void omap2xxx_voltagedomains_init(void);
+extern void omap3xxx_voltagedomains_init(void);
+extern void omap44xx_voltagedomains_init(void);
+
+struct voltagedomain *voltdm_lookup(const char *name);
+void voltdm_init(struct voltagedomain **voltdm_list);
+int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
+int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user),
+ void *user);
+int voltdm_for_each_pwrdm(struct voltagedomain *voltdm,
+ int (*fn)(struct voltagedomain *voltdm,
+ struct powerdomain *pwrdm));
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+void voltdm_reset(struct voltagedomain *voltdm);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
#endif
diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
new file mode 100644
index 0000000..7a41349
--- /dev/null
+++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c
@@ -0,0 +1,32 @@
+/*
+ * OMAP3 voltage domain data
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include "voltage.h"
+
+static struct voltagedomain omap2_voltdm_core = {
+ .name = "core",
+};
+
+static struct voltagedomain omap2_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap2[] __initdata = {
+ &omap2_voltdm_core,
+ &omap2_voltdm_wkup,
+ NULL,
+};
+
+void __init omap2xxx_voltagedomains_init(void)
+{
+ voltdm_init(voltagedomains_omap2);
+}
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index def230f..071101d 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -31,65 +31,70 @@
* VDD data
*/
-static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd1_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK,
};
-static struct omap_vdd_info omap3_vdd1_info = {
- .vp_data = &omap3_vp1_data,
- .vc_data = &omap3_vc1_data,
- .vfsm = &omap3_vdd1_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
+static const struct omap_vfsm_instance omap3_vdd2_vfsm = {
.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET,
- .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT,
.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK,
};
-static struct omap_vdd_info omap3_vdd2_info = {
- .vp_data = &omap3_vp2_data,
- .vc_data = &omap3_vc2_data,
- .vfsm = &omap3_vdd2_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap3_voltdm_mpu = {
+ .name = "mpu_iva",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_mpu,
+ .vfsm = &omap3_vdd1_vfsm,
+ .vp = &omap3_vp_mpu,
};
-/* OMAP3 VDD structures */
-static struct omap_vdd_info *omap3_vdd_info[] = {
- &omap3_vdd1_info,
- &omap3_vdd2_info,
+static struct voltagedomain omap3_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap3_prm_vcvp_read,
+ .write = omap3_prm_vcvp_write,
+ .rmw = omap3_prm_vcvp_rmw,
+ .vc = &omap3_vc_core,
+ .vfsm = &omap3_vdd2_vfsm,
+ .vp = &omap3_vp_core,
};
-/* OMAP3 specific voltage init functions */
-static int __init omap3xxx_voltage_early_init(void)
+static struct voltagedomain omap3_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap3[] __initdata = {
+ &omap3_voltdm_mpu,
+ &omap3_voltdm_core,
+ &omap3_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_ck";
+
+void __init omap3xxx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP3430_GR_MOD;
- s16 prm_irqst_ocp_mod = OCP_MOD;
-
- if (!cpu_is_omap34xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
if (cpu_is_omap3630()) {
- omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
} else {
- omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data;
- omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
+ omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
+ omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
}
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap3_vdd_info,
- ARRAY_SIZE(omap3_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap3);
};
-core_initcall(omap3xxx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index cb64996..c4584e9 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -32,71 +32,80 @@
#include "vc.h"
#include "vp.h"
-static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_mpu_info = {
- .vp_data = &omap4_vp_mpu_data,
- .vc_data = &omap4_vc_mpu_data,
- .vfsm = &omap4_vdd_mpu_vfsm_data,
- .voltdm = {
- .name = "mpu",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_iva_info = {
- .vp_data = &omap4_vp_iva_data,
- .vc_data = &omap4_vc_iva_data,
- .vfsm = &omap4_vdd_iva_vfsm_data,
- .voltdm = {
- .name = "iva",
- },
-};
-
-static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
+static const struct omap_vfsm_instance omap4_vdd_core_vfsm = {
.voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET,
};
-static struct omap_vdd_info omap4_vdd_core_info = {
- .vp_data = &omap4_vp_core_data,
- .vc_data = &omap4_vc_core_data,
- .vfsm = &omap4_vdd_core_vfsm_data,
- .voltdm = {
- .name = "core",
- },
+static struct voltagedomain omap4_voltdm_mpu = {
+ .name = "mpu",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_mpu,
+ .vfsm = &omap4_vdd_mpu_vfsm,
+ .vp = &omap4_vp_mpu,
};
-/* OMAP4 VDD structures */
-static struct omap_vdd_info *omap4_vdd_info[] = {
- &omap4_vdd_mpu_info,
- &omap4_vdd_iva_info,
- &omap4_vdd_core_info,
+static struct voltagedomain omap4_voltdm_iva = {
+ .name = "iva",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_iva,
+ .vfsm = &omap4_vdd_iva_vfsm,
+ .vp = &omap4_vp_iva,
};
-/* OMAP4 specific voltage init functions */
-static int __init omap44xx_voltage_early_init(void)
+static struct voltagedomain omap4_voltdm_core = {
+ .name = "core",
+ .scalable = true,
+ .read = omap4_prm_vcvp_read,
+ .write = omap4_prm_vcvp_write,
+ .rmw = omap4_prm_vcvp_rmw,
+ .vc = &omap4_vc_core,
+ .vfsm = &omap4_vdd_core_vfsm,
+ .vp = &omap4_vp_core,
+};
+
+static struct voltagedomain omap4_voltdm_wkup = {
+ .name = "wakeup",
+};
+
+static struct voltagedomain *voltagedomains_omap4[] __initdata = {
+ &omap4_voltdm_mpu,
+ &omap4_voltdm_iva,
+ &omap4_voltdm_core,
+ &omap4_voltdm_wkup,
+ NULL,
+};
+
+static const char *sys_clk_name __initdata = "sys_clkin_ck";
+
+void __init omap44xx_voltagedomains_init(void)
{
- s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
- s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
-
- if (!cpu_is_omap44xx())
- return 0;
+ struct voltagedomain *voltdm;
+ int i;
/*
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
- omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data;
- omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
- omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
+ omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
+ omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
+ omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap4_vdd_info,
- ARRAY_SIZE(omap4_vdd_info));
+ for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
+ voltdm->sys_clk.name = sys_clk_name;
+
+ voltdm_init(voltagedomains_omap4);
};
-core_initcall(omap44xx_voltage_early_init);
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
new file mode 100644
index 0000000..66bd700
--- /dev/null
+++ b/arch/arm/mach-omap2/vp.c
@@ -0,0 +1,278 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <plat/common.h>
+
+#include "voltage.h"
+#include "vp.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ char vsel;
+
+ vsel = voltdm->pmic->uv_to_vsel(volt);
+
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~(vp->common->vpconfig_initvoltage_mask |
+ vp->common->vpconfig_forceupdate |
+ vp->common->vpconfig_initvdd);
+ vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask);
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /* Trigger initVDD value copy to voltage processor */
+ voltdm->write((vpconfig | vp->common->vpconfig_initvdd),
+ vp->vpconfig);
+
+ /* Clear initVDD copy trigger bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return vpconfig;
+}
+
+/* Generic voltage init functions */
+void __init omap_vp_init(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 val, sys_clk_rate, timeout, waittime;
+ u32 vddmin, vddmax, vstepmin, vstepmax;
+
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vp->enabled = false;
+
+ /* Divide to avoid overflow */
+ sys_clk_rate = voltdm->sys_clk.rate / 1000;
+
+ timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
+ vddmin = voltdm->pmic->vp_vddmin;
+ vddmax = voltdm->pmic->vp_vddmax;
+
+ waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
+ sys_clk_rate) / 1000;
+ vstepmin = voltdm->pmic->vp_vstepmin;
+ vstepmax = voltdm->pmic->vp_vstepmax;
+
+ /*
+ * VP_CONFIG: error gain is not set here, it will be updated
+ * on each scale, based on OPP.
+ */
+ val = (voltdm->pmic->vp_erroroffset <<
+ __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) |
+ vp->common->vpconfig_timeouten;
+ voltdm->write(val, vp->vpconfig);
+
+ /* VSTEPMIN */
+ val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) |
+ (vstepmin << vp->common->vstepmin_stepmin_shift);
+ voltdm->write(val, vp->vstepmin);
+
+ /* VSTEPMAX */
+ val = (vstepmax << vp->common->vstepmax_stepmax_shift) |
+ (waittime << vp->common->vstepmax_smpswaittimemax_shift);
+ voltdm->write(val, vp->vstepmax);
+
+ /* VLIMITTO */
+ val = (vddmax << vp->common->vlimitto_vddmax_shift) |
+ (vddmin << vp->common->vlimitto_vddmin_shift) |
+ (timeout << vp->common->vlimitto_timeout_shift);
+ voltdm->write(val, vp->vlimitto);
+}
+
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_volt_data *volt_data;
+
+ if (!voltdm->vp)
+ return -EINVAL;
+
+ /* Get volt_data corresponding to target_volt */
+ volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
+ if (IS_ERR(volt_data))
+ return -EINVAL;
+
+ /* Setting vp errorgain based on the voltage */
+ voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask,
+ volt_data->vp_errgain <<
+ __ffs(voltdm->vp->common->vpconfig_errorgain_mask),
+ voltdm->vp->vpconfig);
+
+ return 0;
+}
+
+/* VP force update method of voltage scaling */
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vp_instance *vp = voltdm->vp;
+ u32 vpconfig;
+ u8 target_vsel, current_vsel;
+ int ret, timeout = 0;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ /*
+ * Clear all pending TransactionDone interrupt/status. Typical latency
+ * is <3us
+ */
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+ if (timeout >= VP_TRANXDONE_TIMEOUT) {
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
+ "Voltage change aborted", __func__, voltdm->name);
+ return -ETIMEDOUT;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, target_volt);
+
+ /* Force update of voltage */
+ voltdm->write(vpconfig | vp->common->vpconfig_forceupdate,
+ voltdm->vp->vpconfig);
+
+ /*
+ * Wait for TransactionDone. Typical latency is <200us.
+ * Depends on SMPSWAITTIMEMIN/MAX and voltage change
+ */
+ timeout = 0;
+ omap_test_timeout(vp->common->ops->check_txdone(vp->id),
+ VP_TRANXDONE_TIMEOUT, timeout);
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
+ "TRANXDONE never got set after the voltage update\n",
+ __func__, voltdm->name);
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+
+ /*
+ * Disable TransactionDone interrupt , clear all status, clear
+ * control registers
+ */
+ timeout = 0;
+ while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+ vp->common->ops->clear_txdone(vp->id);
+ if (!vp->common->ops->check_txdone(vp->id))
+ break;
+ udelay(1);
+ }
+
+ if (timeout >= VP_TRANXDONE_TIMEOUT)
+ pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
+ "to clear the TRANXDONE status\n",
+ __func__, voltdm->name);
+
+ /* Clear force bit */
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ return 0;
+}
+
+/**
+ * omap_vp_enable() - API to enable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be enabled.
+ *
+ * This API enables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_enable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig, volt;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already enabled, do nothing. Return */
+ if (vp->enabled)
+ return;
+
+ volt = voltdm_get_voltage(voltdm);
+ if (!volt) {
+ pr_warning("%s: unable to find current voltage for %s\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ vpconfig = _vp_set_init_voltage(voltdm, volt);
+
+ /* Enable VP */
+ vpconfig |= vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ vp->enabled = true;
+}
+
+/**
+ * omap_vp_disable() - API to disable a particular VP
+ * @voltdm: pointer to the VDD whose VP is to be disabled.
+ *
+ * This API disables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_disable(struct voltagedomain *voltdm)
+{
+ struct omap_vp_instance *vp;
+ u32 vpconfig;
+ int timeout;
+
+ if (!voltdm || IS_ERR(voltdm)) {
+ pr_warning("%s: VDD specified does not exist!\n", __func__);
+ return;
+ }
+
+ vp = voltdm->vp;
+ if (!voltdm->read || !voltdm->write) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* If VP is already disabled, do nothing. Return */
+ if (!vp->enabled) {
+ pr_warning("%s: Trying to disable VP for vdd_%s when"
+ "it is already disabled\n", __func__, voltdm->name);
+ return;
+ }
+
+ /* Disable VP */
+ vpconfig = voltdm->read(vp->vpconfig);
+ vpconfig &= ~vp->common->vpconfig_vpenable;
+ voltdm->write(vpconfig, vp->vpconfig);
+
+ /*
+ * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
+ */
+ omap_test_timeout((voltdm->read(vp->vstatus)),
+ VP_IDLE_TIMEOUT, timeout);
+
+ if (timeout >= VP_IDLE_TIMEOUT)
+ pr_warning("%s: vdd_%s idle timedout\n",
+ __func__, voltdm->name);
+
+ vp->enabled = false;
+
+ return;
+}
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 7ce134f..7c155d2 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -19,44 +19,60 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID 0
+#define OMAP3_VP_VDD_CORE_ID 1
+#define OMAP4_VP_VDD_CORE_ID 0
+#define OMAP4_VP_VDD_IVA_ID 1
+#define OMAP4_VP_VDD_MPU_ID 2
+
/* XXX document */
#define VP_IDLE_TIMEOUT 200
#define VP_TRANXDONE_TIMEOUT 300
+/**
+ * struct omap_vp_ops - per-VP operations
+ * @check_txdone: check for VP transaction done
+ * @clear_txdone: clear VP transaction done status
+ */
+struct omap_vp_ops {
+ u32 (*check_txdone)(u8 vp_id);
+ void (*clear_txdone)(u8 vp_id);
+};
/**
- * struct omap_vp_common_data - register data common to all VDDs
+ * struct omap_vp_common - register data common to all VDDs
+ * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg
- * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
+ * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg
* @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg
* @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg
* @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg
- * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
- * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
- * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
- * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
- * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
- * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
- *
- * XXX It it not necessary to have both a mask and a shift for the same
- * bitfield - remove one
- * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix!
+ * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg
+ * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg
+ * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg
+ * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg
+ * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
+ * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg
*/
-struct omap_vp_common_data {
+struct omap_vp_common {
+ u32 vpconfig_erroroffset_mask;
u32 vpconfig_errorgain_mask;
u32 vpconfig_initvoltage_mask;
- u32 vpconfig_timeouten;
- u32 vpconfig_initvdd;
- u32 vpconfig_forceupdate;
- u32 vpconfig_vpenable;
- u8 vpconfig_erroroffset_shift;
- u8 vpconfig_errorgain_shift;
- u8 vpconfig_initvoltage_shift;
+ u8 vpconfig_timeouten;
+ u8 vpconfig_initvdd;
+ u8 vpconfig_forceupdate;
+ u8 vpconfig_vpenable;
u8 vstepmin_stepmin_shift;
u8 vstepmin_smpswaittimemin_shift;
u8 vstepmax_stepmax_shift;
@@ -64,80 +80,49 @@
u8 vlimitto_vddmin_shift;
u8 vlimitto_vddmax_shift;
u8 vlimitto_timeout_shift;
+ u8 vpvoltage_mask;
+
+ const struct omap_vp_ops *ops;
};
/**
- * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data
- * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM
- * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
- *
- * XXX prm_irqst_reg does not belong here
- * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a
- * hardware bug
- * XXX This structure is probably not needed
- */
-struct omap_vp_prm_irqst_data {
- u8 prm_irqst_reg;
- u32 tranxdone_status;
-};
-
-/**
- * struct omap_vp_instance_data - VP register offsets (per-VDD)
- * @vp_common: pointer to struct omap_vp_common_data * for this SoC
- * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD
+ * struct omap_vp_instance - VP register offsets (per-VDD)
+ * @common: pointer to struct omap_vp_common * for this SoC
* @vpconfig: PRM_VP*_CONFIG reg offset from PRM start
* @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start
* @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start
* @vstatus: PRM_VP*_VSTATUS reg offset from PRM start
* @voltage: PRM_VP*_VOLTAGE reg offset from PRM start
+ * @id: Unique identifier for VP instance.
+ * @enabled: flag to keep track of whether vp is enabled or not
*
* XXX vp_common is probably not needed since it is per-SoC
*/
-struct omap_vp_instance_data {
- const struct omap_vp_common_data *vp_common;
- const struct omap_vp_prm_irqst_data *prm_irqst_data;
+struct omap_vp_instance {
+ const struct omap_vp_common *common;
u8 vpconfig;
u8 vstepmin;
u8 vstepmax;
u8 vlimitto;
u8 vstatus;
u8 voltage;
+ u8 id;
+ bool enabled;
};
-/**
- * struct omap_vp_runtime_data - VP data populated at runtime by code
- * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG
- * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG
- * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO
- * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN
- * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX
- * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO
- * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO
- *
- * XXX Is this structure really needed? Why not just program the
- * device directly? They are in PRM space, therefore in the WKUP
- * powerdomain, so register contents should not be lost in off-mode.
- * XXX Some of these fields are incorrectly named, e.g., vstep*
- */
-struct omap_vp_runtime_data {
- u32 vpconfig_erroroffset;
- u16 vpconfig_errorgain;
- u16 vstepmin_smpswaittimemin;
- u16 vstepmax_smpswaittimemax;
- u16 vlimitto_timeout;
- u8 vstepmin_stepmin;
- u8 vstepmax_stepmax;
- u8 vlimitto_vddmin;
- u8 vlimitto_vddmax;
-};
+extern struct omap_vp_instance omap3_vp_mpu;
+extern struct omap_vp_instance omap3_vp_core;
-extern struct omap_vp_instance_data omap3_vp1_data;
-extern struct omap_vp_instance_data omap3_vp2_data;
+extern struct omap_vp_instance omap4_vp_mpu;
+extern struct omap_vp_instance omap4_vp_iva;
+extern struct omap_vp_instance omap4_vp_core;
-extern struct omap_vp_instance_data omap4_vp_mpu_data;
-extern struct omap_vp_instance_data omap4_vp_iva_data;
-extern struct omap_vp_instance_data omap4_vp_core_data;
+void omap_vp_init(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt);
+int omap_vp_update_errorgain(struct voltagedomain *voltdm,
+ unsigned long target_volt);
#endif
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index 6452170..260c554 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -25,16 +25,20 @@
#include "voltage.h"
#include "vp.h"
+#include "prm2xxx_3xxx.h"
+
+static const struct omap_vp_ops omap3_vp_ops = {
+ .check_txdone = omap3_prm_vp_check_txdone,
+ .clear_txdone = omap3_prm_vp_clear_txdone,
+};
/*
* VP data common to 34xx/36xx chips
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap3_vp_common = {
- .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap3_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP3430_INITVDD_MASK,
@@ -47,36 +51,29 @@
.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK,
+
+ .ops = &omap3_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp1_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_mpu = {
+ .id = OMAP3_VP_VDD_MPU_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp1_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = {
- .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap3_vp2_data = {
- .vp_common = &omap3_vp_common,
+struct omap_vp_instance omap3_vp_core = {
+ .id = OMAP3_VP_VDD_CORE_ID,
+ .common = &omap3_vp_common,
.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap3_vp2_prm_irqst_data,
};
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 65d1ad6..b4e7704 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -27,15 +27,18 @@
#include "vp.h"
+static const struct omap_vp_ops omap4_vp_ops = {
+ .check_txdone = omap4_prm_vp_check_txdone,
+ .clear_txdone = omap4_prm_vp_clear_txdone,
+};
+
/*
* VP data common to 44xx chips
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
-static const struct omap_vp_common_data omap4_vp_common = {
- .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
+static const struct omap_vp_common omap4_vp_common = {
+ .vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
- .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,
- .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT,
.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK,
.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK,
.vpconfig_initvdd = OMAP4430_INITVDD_MASK,
@@ -48,53 +51,39 @@
.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK,
+ .ops = &omap4_vp_ops,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
- .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_mpu_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_mpu = {
+ .id = OMAP4_VP_VDD_MPU_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_iva_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_iva = {
+ .id = OMAP4_VP_VDD_IVA_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_iva_prm_irqst_data,
};
-static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = {
- .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
- .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
-};
-
-struct omap_vp_instance_data omap4_vp_core_data = {
- .vp_common = &omap4_vp_common,
+struct omap_vp_instance omap4_vp_core = {
+ .id = OMAP4_VP_VDD_CORE_ID,
+ .common = &omap4_vp_common,
.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
- .prm_irqst_data = &omap4_vp_core_prm_irqst_data,
};
-
diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
new file mode 100644
index 0000000..c550b63
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -0,0 +1,3 @@
+obj-y := common.o
+obj-y += time.o
+obj-y += io.o
diff --git a/arch/arm/mach-picoxcell/Makefile.boot b/arch/arm/mach-picoxcell/Makefile.boot
new file mode 100644
index 0000000..b327175
--- /dev/null
+++ b/arch/arm/mach-picoxcell/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x00008000
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
new file mode 100644
index 0000000..34d0834
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+static void __init picoxcell_init_machine(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *picoxcell_dt_match[] = {
+ "picochip,pc3x2",
+ "picochip,pc3x3",
+ NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+ { .compatible = "arm,pl192-vic" },
+ { /* Sentinel */ }
+};
+
+static void __init picoxcell_init_irq(void)
+{
+ vic_init(IO_ADDRESS(PICOXCELL_VIC0_BASE), 0, ~0, 0);
+ vic_init(IO_ADDRESS(PICOXCELL_VIC1_BASE), 32, ~0, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC0_BASE, 0);
+ irq_domain_generate_simple(vic_of_match, PICOXCELL_VIC1_BASE, 32);
+}
+
+DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
+ .map_io = picoxcell_map_io,
+ .nr_irqs = ARCH_NR_IRQS,
+ .init_irq = picoxcell_init_irq,
+ .timer = &picoxcell_timer,
+ .init_machine = picoxcell_init_machine,
+ .dt_compat = picoxcell_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
new file mode 100644
index 0000000..5263f0f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/common.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#ifndef __PICOXCELL_COMMON_H__
+#define __PICOXCELL_COMMON_H__
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer picoxcell_timer;
+extern void picoxcell_map_io(void);
+
+#endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
new file mode 100644
index 0000000..8f2c234
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/debug-macro.S
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#define UART_SHIFT 2
+
+ .macro addruart, rp, rv
+ ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
+ ldr \rp, =PICOXCELL_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
new file mode 100644
index 0000000..a6b09f7
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
@@ -0,0 +1,19 @@
+/*
+ * entry-macro.S
+ *
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * Low-level IRQ helper macros for picoXcell platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#define VA_VIC0 IO_ADDRESS(PICOXCELL_VIC0_BASE)
+#define VA_VIC1 IO_ADDRESS(PICOXCELL_VIC1_BASE)
+
+#include <asm/entry-macro-vic2.S>
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-picoxcell/include/mach/gpio.h
similarity index 100%
copy from arch/um/include/asm/ftrace.h
copy to arch/arm/mach-picoxcell/include/mach/gpio.h
diff --git a/arch/arm/mach-picoxcell/include/mach/hardware.h b/arch/arm/mach-picoxcell/include/mach/hardware.h
new file mode 100644
index 0000000..70ff581
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/picoxcell_soc.h>
+
+#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/io.h b/arch/arm/mach-picoxcell/include/mach/io.h
new file mode 100644
index 0000000..7573ec7
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No ioports, but needed for driver compatibility. */
+#define __io(a) __typesafe_io(a)
+/* No PCI possible on picoxcell. */
+#define __mem_pci(a) (a)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/irqs.h b/arch/arm/mach-picoxcell/include/mach/irqs.h
new file mode 100644
index 0000000..4d13ed9
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/irqs.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define ARCH_NR_IRQS 64
+#define NR_IRQS (128 + ARCH_NR_IRQS)
+
+#define IRQ_VIC0_BASE 0
+#define IRQ_VIC1_BASE 32
+
+#endif /* __MACH_IRQS_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-picoxcell/include/mach/map.h
new file mode 100644
index 0000000..c06afad
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/map.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_MAP_H__
+#define __PICOXCELL_MAP_H__
+
+#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
+
+#ifdef __ASSEMBLY__
+#define IO_ADDRESS(x) PHYS_TO_IO((x))
+#else
+#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x)))
+#endif
+
+#endif /* __PICOXCELL_MAP_H__ */
diff --git a/arch/um/include/asm/ftrace.h b/arch/arm/mach-picoxcell/include/mach/memory.h
similarity index 100%
copy from arch/um/include/asm/ftrace.h
copy to arch/arm/mach-picoxcell/include/mach/memory.h
diff --git a/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
new file mode 100644
index 0000000..5566fc8
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This file contains the hardware definitions of the picoXcell SoC devices.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __PICOXCELL_SOC_H__
+#define __PICOXCELL_SOC_H__
+
+#define PICOXCELL_UART1_BASE 0x80230000
+#define PICOXCELL_PERIPH_BASE 0x80000000
+#define PICOXCELL_PERIPH_LENGTH SZ_4M
+#define PICOXCELL_VIC0_BASE 0x80060000
+#define PICOXCELL_VIC1_BASE 0x80064000
+
+#endif /* __PICOXCELL_SOC_H__ */
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
new file mode 100644
index 0000000..67c589b
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/system.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching and wait for interrupt
+ * tricks.
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(int mode, const char *cmd)
+{
+ /* Watchdog reset to go here. */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-picoxcell/include/mach/timex.h b/arch/arm/mach-picoxcell/include/mach/timex.h
new file mode 100644
index 0000000..6c540a6
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __TIMEX_H__
+#define __TIMEX_H__
+
+/* Bogus value to allow the kernel to compile. */
+#define CLOCK_TICK_RATE 1000000
+
+#endif /* __TIMEX_H__ */
+
diff --git a/arch/arm/mach-picoxcell/include/mach/uncompress.h b/arch/arm/mach-picoxcell/include/mach/uncompress.h
new file mode 100644
index 0000000..b60b19d
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define putc(c)
+#define flush()
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-picoxcell/include/mach/vmalloc.h b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
new file mode 100644
index 0000000..0216cc4
--- /dev/null
+++ b/arch/arm/mach-picoxcell/include/mach/vmalloc.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#define VMALLOC_END 0xfe000000UL
diff --git a/arch/arm/mach-picoxcell/io.c b/arch/arm/mach-picoxcell/io.c
new file mode 100644
index 0000000..39e9b9e
--- /dev/null
+++ b/arch/arm/mach-picoxcell/io.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/picoxcell_soc.h>
+
+#include "common.h"
+
+void __init picoxcell_map_io(void)
+{
+ struct map_desc io_map = {
+ .virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
+ .pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
+ .length = PICOXCELL_PERIPH_LENGTH,
+ .type = MT_DEVICE,
+ };
+
+ iotable_init(&io_map, 1);
+}
diff --git a/arch/arm/mach-picoxcell/time.c b/arch/arm/mach-picoxcell/time.c
new file mode 100644
index 0000000..90a554f
--- /dev/null
+++ b/arch/arm/mach-picoxcell/time.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support@picochip.com
+ */
+#include <linux/dw_apb_timer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched.h>
+
+#include <asm/mach/time.h>
+#include <asm/sched_clock.h>
+
+#include "common.h"
+
+static void timer_get_base_and_rate(struct device_node *np,
+ void __iomem **base, u32 *rate)
+{
+ *base = of_iomap(np, 0);
+
+ if (!*base)
+ panic("Unable to map regs for %s", np->name);
+
+ if (of_property_read_u32(np, "clock-freq", rate))
+ panic("No clock-freq property for %s", np->name);
+}
+
+static void picoxcell_add_clockevent(struct device_node *event_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clock_event_device *ced;
+ u32 irq, rate;
+
+ irq = irq_of_parse_and_map(event_timer, 0);
+ if (irq == NO_IRQ)
+ panic("No IRQ for clock event timer");
+
+ timer_get_base_and_rate(event_timer, &iobase, &rate);
+
+ ced = dw_apb_clockevent_init(0, event_timer->name, 300, iobase, irq,
+ rate);
+ if (!ced)
+ panic("Unable to initialise clockevent device");
+
+ dw_apb_clockevent_register(ced);
+}
+
+static void picoxcell_add_clocksource(struct device_node *source_timer)
+{
+ void __iomem *iobase;
+ struct dw_apb_clocksource *cs;
+ u32 rate;
+
+ timer_get_base_and_rate(source_timer, &iobase, &rate);
+
+ cs = dw_apb_clocksource_init(300, source_timer->name, iobase, rate);
+ if (!cs)
+ panic("Unable to initialise clocksource device");
+
+ dw_apb_clocksource_start(cs);
+ dw_apb_clocksource_register(cs);
+}
+
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *sched_io_base;
+
+unsigned long long notrace sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace picoxcell_update_sched_clock(void)
+{
+ cycle_t cyc = sched_io_base ? __raw_readl(sched_io_base) : 0;
+
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static const struct of_device_id picoxcell_rtc_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-rtc" },
+ { /* Sentinel */ },
+};
+
+static void picoxcell_init_sched_clock(void)
+{
+ struct device_node *sched_timer;
+ u32 rate;
+
+ sched_timer = of_find_matching_node(NULL, picoxcell_rtc_ids);
+ if (!sched_timer)
+ panic("No RTC for sched clock to use");
+
+ timer_get_base_and_rate(sched_timer, &sched_io_base, &rate);
+ of_node_put(sched_timer);
+
+ init_sched_clock(&cd, picoxcell_update_sched_clock, 32, rate);
+}
+
+static const struct of_device_id picoxcell_timer_ids[] __initconst = {
+ { .compatible = "picochip,pc3x2-timer" },
+ {},
+};
+
+static void __init picoxcell_timer_init(void)
+{
+ struct device_node *event_timer, *source_timer;
+
+ event_timer = of_find_matching_node(NULL, picoxcell_timer_ids);
+ if (!event_timer)
+ panic("No timer for clockevent");
+ picoxcell_add_clockevent(event_timer);
+
+ source_timer = of_find_matching_node(event_timer, picoxcell_timer_ids);
+ if (!source_timer)
+ panic("No timer for clocksource");
+ picoxcell_add_clocksource(source_timer);
+
+ of_node_put(source_timer);
+
+ picoxcell_init_sched_clock();
+}
+
+struct sys_timer picoxcell_timer = {
+ .init = picoxcell_timer_init,
+};
diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile
index 7af7fc0..13dd160 100644
--- a/arch/arm/mach-prima2/Makefile
+++ b/arch/arm/mach-prima2/Makefile
@@ -3,5 +3,7 @@
obj-y += clock.o
obj-y += rstc.o
obj-y += prima2.o
+obj-y += rtciobrg.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
+obj-$(CONFIG_SUSPEND) += pm.o sleep.o
diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c
index 615a4e7..aebad7e 100644
--- a/arch/arm/mach-prima2/clock.c
+++ b/arch/arm/mach-prima2/clock.c
@@ -350,10 +350,10 @@
.clk = &clk_mem,
}, {
.dev_id = "sys",
- .clk = &clk_sys,
+ .clk = &clk_sys,
}, {
.dev_id = "io",
- .clk = &clk_io,
+ .clk = &clk_io,
},
};
diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c
index 7af254d..d93ceef 100644
--- a/arch/arm/mach-prima2/irq.c
+++ b/arch/arm/mach-prima2/irq.c
@@ -13,6 +13,8 @@
#include <asm/mach/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/irqdomain.h>
+#include <linux/syscore_ops.h>
#define SIRFSOC_INT_RISC_MASK0 0x0018
#define SIRFSOC_INT_RISC_MASK1 0x001C
@@ -66,7 +68,48 @@
if (!sirfsoc_intc_base)
panic("unable to map intc cpu registers\n");
+ irq_domain_add_simple(np, 0);
+
of_node_put(np);
sirfsoc_irq_init();
}
+
+struct sirfsoc_irq_status {
+ u32 mask0;
+ u32 mask1;
+ u32 level0;
+ u32 level1;
+};
+
+static struct sirfsoc_irq_status sirfsoc_irq_st;
+
+static int sirfsoc_irq_suspend(void)
+{
+ sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
+ sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
+ sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
+ sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
+
+ return 0;
+}
+
+static void sirfsoc_irq_resume(void)
+{
+ writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
+ writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
+ writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
+ writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
+}
+
+static struct syscore_ops sirfsoc_irq_syscore_ops = {
+ .suspend = sirfsoc_irq_suspend,
+ .resume = sirfsoc_irq_resume,
+};
+
+static int __init sirfsoc_irq_pm_init(void)
+{
+ register_syscore_ops(&sirfsoc_irq_syscore_ops);
+ return 0;
+}
+device_initcall(sirfsoc_irq_pm_init);
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index 66c6387..c998377 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -8,51 +8,24 @@
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/errno.h>
#include <linux/of.h>
-#include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h>
-#define L2X0_ADDR_FILTERING_START 0xC00
-#define L2X0_ADDR_FILTERING_END 0xC04
-
-static struct of_device_id l2x_ids[] = {
- { .compatible = "arm,pl310-cache" },
+static struct of_device_id prima2_l2x0_ids[] = {
+ { .compatible = "sirf,prima2-pl310-cache" },
+ {},
};
-static int __init sirfsoc_of_l2x_init(void)
+static int __init sirfsoc_l2x0_init(void)
{
struct device_node *np;
- void __iomem *sirfsoc_l2x_base;
- np = of_find_matching_node(NULL, l2x_ids);
- if (!np)
- panic("unable to find compatible l2x node in dtb\n");
-
- sirfsoc_l2x_base = of_iomap(np, 0);
- if (!sirfsoc_l2x_base)
- panic("unable to map l2x cpu registers\n");
-
- of_node_put(np);
-
- if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) {
- /*
- * set the physical memory windows L2 cache will cover
- */
- writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024,
- sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
- writel_relaxed(PHYS_OFFSET | 0x1,
- sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
-
- writel_relaxed(0,
- sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL);
- writel_relaxed(0,
- sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL);
+ np = of_find_matching_node(NULL, prima2_l2x0_ids);
+ if (np) {
+ pr_info("Initializing prima2 L2 cache\n");
+ return l2x0_of_init(0x40000, 0);
}
- l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000,
- 0x00000000);
return 0;
}
-early_initcall(sirfsoc_of_l2x_init);
+early_initcall(sirfsoc_l2x0_init);
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
new file mode 100644
index 0000000..cb53160
--- /dev/null
+++ b/arch/arm/mach-prima2/pm.c
@@ -0,0 +1,150 @@
+/*
+ * power management entry for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/rtc/sirfsoc_rtciobrg.h>
+#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "pm.h"
+
+/*
+ * suspend asm codes will access these to make DRAM become self-refresh and
+ * system sleep
+ */
+u32 sirfsoc_pwrc_base;
+void __iomem *sirfsoc_memc_base;
+
+static void sirfsoc_set_wakeup_source(void)
+{
+ u32 pwr_trigger_en_reg;
+ pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_TRIGGER_EN);
+#define X_ON_KEY_B (1 << 0)
+ sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B,
+ sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN);
+}
+
+static void sirfsoc_set_sleep_mode(u32 mode)
+{
+ u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_PDN_CTRL);
+ sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1);
+ sleep_mode |= mode << 1;
+ sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_PDN_CTRL);
+}
+
+static int sirfsoc_pre_suspend_power_off(void)
+{
+ u32 wakeup_entry = virt_to_phys(cpu_resume);
+
+ sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base +
+ SIRFSOC_PWRC_SCRATCH_PAD1);
+
+ sirfsoc_set_wakeup_source();
+
+ sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE);
+
+ return 0;
+}
+
+static int sirfsoc_pm_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ sirfsoc_pre_suspend_power_off();
+
+ outer_flush_all();
+ outer_disable();
+ /* go zzz */
+ cpu_suspend(0, sirfsoc_finish_suspend);
+ outer_resume();
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct platform_suspend_ops sirfsoc_pm_ops = {
+ .enter = sirfsoc_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init sirfsoc_pm_init(void)
+{
+ suspend_set_ops(&sirfsoc_pm_ops);
+ return 0;
+}
+late_initcall(sirfsoc_pm_init);
+
+static const struct of_device_id pwrc_ids[] = {
+ { .compatible = "sirf,prima2-pwrc" },
+ {}
+};
+
+static int __init sirfsoc_of_pwrc_init(void)
+{
+ struct device_node *np;
+
+ np = of_find_matching_node(NULL, pwrc_ids);
+ if (!np)
+ panic("unable to find compatible pwrc node in dtb\n");
+
+ /*
+ * pwrc behind rtciobrg is not located in memory space
+ * though the property is named reg. reg only means base
+ * offset for pwrc. then of_iomap is not suitable here.
+ */
+ if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base))
+ panic("unable to find base address of pwrc node in dtb\n");
+
+ of_node_put(np);
+
+ return 0;
+}
+postcore_initcall(sirfsoc_of_pwrc_init);
+
+static const struct of_device_id memc_ids[] = {
+ { .compatible = "sirf,prima2-memc" },
+ {}
+};
+
+static int __devinit sirfsoc_memc_probe(struct platform_device *op)
+{
+ struct device_node *np = op->dev.of_node;
+
+ sirfsoc_memc_base = of_iomap(np, 0);
+ if (!sirfsoc_memc_base)
+ panic("unable to map memc registers\n");
+
+ return 0;
+}
+
+static struct platform_driver sirfsoc_memc_driver = {
+ .probe = sirfsoc_memc_probe,
+ .driver = {
+ .name = "sirfsoc-memc",
+ .owner = THIS_MODULE,
+ .of_match_table = memc_ids,
+ },
+};
+
+static int __init sirfsoc_memc_init(void)
+{
+ return platform_driver_register(&sirfsoc_memc_driver);
+}
+postcore_initcall(sirfsoc_memc_init);
diff --git a/arch/arm/mach-prima2/pm.h b/arch/arm/mach-prima2/pm.h
new file mode 100644
index 0000000..bae6d77
--- /dev/null
+++ b/arch/arm/mach-prima2/pm.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-prima2/pm.h
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef _MACH_PRIMA2_PM_H_
+#define _MACH_PRIMA2_PM_H_
+
+#define SIRFSOC_PWR_SLEEPFORCE 0x01
+
+#define SIRFSOC_SLEEP_MODE_MASK 0x3
+#define SIRFSOC_DEEP_SLEEP_MODE 0x1
+
+#define SIRFSOC_PWRC_PDN_CTRL 0x0
+#define SIRFSOC_PWRC_PON_OFF 0x4
+#define SIRFSOC_PWRC_TRIGGER_EN 0x8
+#define SIRFSOC_PWRC_PIN_STATUS 0x14
+#define SIRFSOC_PWRC_SCRATCH_PAD1 0x18
+#define SIRFSOC_PWRC_SCRATCH_PAD2 0x1C
+
+#ifndef __ASSEMBLY__
+extern int sirfsoc_finish_suspend(unsigned long);
+#endif
+
+#endif
+
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index ee33c3d..ef555c0 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -1,5 +1,5 @@
/*
- * Defines machines for CSR SiRFprimaII
+ * Defines machines for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
new file mode 100644
index 0000000..9d80f1e
--- /dev/null
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -0,0 +1,139 @@
+/*
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#define SIRFSOC_CPUIOBRG_CTRL 0x00
+#define SIRFSOC_CPUIOBRG_WRBE 0x04
+#define SIRFSOC_CPUIOBRG_ADDR 0x08
+#define SIRFSOC_CPUIOBRG_DATA 0x0c
+
+/*
+ * suspend asm codes will access this address to make system deepsleep
+ * after DRAM becomes self-refresh
+ */
+void __iomem *sirfsoc_rtciobrg_base;
+static DEFINE_SPINLOCK(rtciobrg_lock);
+
+/*
+ * symbols without lock are only used by suspend asm codes
+ * and these symbols are not exported too
+ */
+void sirfsoc_rtc_iobrg_wait_sync(void)
+{
+ while (readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL))
+ cpu_relax();
+}
+
+void sirfsoc_rtc_iobrg_besyncing(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtciobrg_lock, flags);
+
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ spin_unlock_irqrestore(&rtciobrg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_besyncing);
+
+u32 __sirfsoc_rtc_iobrg_readl(u32 addr)
+{
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ writel_relaxed(0x00, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE);
+ writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR);
+ writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL);
+
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ return readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA);
+}
+
+u32 sirfsoc_rtc_iobrg_readl(u32 addr)
+{
+ unsigned long flags, val;
+
+ spin_lock_irqsave(&rtciobrg_lock, flags);
+
+ val = __sirfsoc_rtc_iobrg_readl(addr);
+
+ spin_unlock_irqrestore(&rtciobrg_lock, flags);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_readl);
+
+void sirfsoc_rtc_iobrg_pre_writel(u32 val, u32 addr)
+{
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ writel_relaxed(0xf1, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE);
+ writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR);
+
+ writel_relaxed(val, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA);
+}
+
+void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&rtciobrg_lock, flags);
+
+ sirfsoc_rtc_iobrg_pre_writel(val, addr);
+
+ writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL);
+
+ sirfsoc_rtc_iobrg_wait_sync();
+
+ spin_unlock_irqrestore(&rtciobrg_lock, flags);
+}
+EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel);
+
+static const struct of_device_id rtciobrg_ids[] = {
+ { .compatible = "sirf,prima2-rtciobg" },
+ {}
+};
+
+static int __devinit sirfsoc_rtciobrg_probe(struct platform_device *op)
+{
+ struct device_node *np = op->dev.of_node;
+
+ sirfsoc_rtciobrg_base = of_iomap(np, 0);
+ if (!sirfsoc_rtciobrg_base)
+ panic("unable to map rtc iobrg registers\n");
+
+ return 0;
+}
+
+static struct platform_driver sirfsoc_rtciobrg_driver = {
+ .probe = sirfsoc_rtciobrg_probe,
+ .driver = {
+ .name = "sirfsoc-rtciobrg",
+ .owner = THIS_MODULE,
+ .of_match_table = rtciobrg_ids,
+ },
+};
+
+static int __init sirfsoc_rtciobrg_init(void)
+{
+ return platform_driver_register(&sirfsoc_rtciobrg_driver);
+}
+postcore_initcall(sirfsoc_rtciobrg_init);
+
+MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
+ "Barry Song <baohua.song@csr.com>");
+MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S
new file mode 100644
index 0000000..0745abc
--- /dev/null
+++ b/arch/arm/mach-prima2/sleep.S
@@ -0,0 +1,64 @@
+/*
+ * sleep mode for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+#define DENALI_CTL_22_OFF 0x58
+#define DENALI_CTL_112_OFF 0x1c0
+
+ .text
+
+ENTRY(sirfsoc_finish_suspend)
+ @ r5: mem controller
+ ldr r0, =sirfsoc_memc_base
+ ldr r5, [r0]
+ @ r6: pwrc base offset
+ ldr r0, =sirfsoc_pwrc_base
+ ldr r6, [r0]
+ @ r7: rtc iobrg controller
+ ldr r0, =sirfsoc_rtciobrg_base
+ ldr r7, [r0]
+
+ @ Read the power control register and set the
+ @ sleep force bit.
+ add r0, r6, #SIRFSOC_PWRC_PDN_CTRL
+ bl __sirfsoc_rtc_iobrg_readl
+ orr r0,r0,#SIRFSOC_PWR_SLEEPFORCE
+ add r1, r6, #SIRFSOC_PWRC_PDN_CTRL
+ bl sirfsoc_rtc_iobrg_pre_writel
+ mov r1, #0x1
+
+ @ read the MEM ctl register and set the self
+ @ refresh bit
+
+ ldr r2, [r5, #DENALI_CTL_22_OFF]
+ orr r2, r2, #0x1
+
+ @ Following code has to run from cache since
+ @ the RAM is going to self refresh mode
+ .align 5
+ str r2, [r5, #DENALI_CTL_22_OFF]
+
+1:
+ ldr r4, [r5, #DENALI_CTL_112_OFF]
+ tst r4, #0x1
+ bne 1b
+
+ @ write SLEEPFORCE through rtc iobridge
+
+ str r1, [r7]
+ @ wait rtc io bridge sync
+1:
+ ldr r3, [r7]
+ tst r3, #0x01
+ bne 1b
+ b .
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index ed7ec48..b7a6091 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -40,6 +40,17 @@
#define SIRFSOC_TIMER_LATCH_BIT BIT(0)
+#define SIRFSOC_TIMER_REG_CNT 11
+
+static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
+ SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2,
+ SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5,
+ SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV,
+ SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI,
+};
+
+static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT];
+
static void __iomem *sirfsoc_timer_base;
static void __init sirfsoc_of_timer_map(void);
@@ -106,6 +117,27 @@
}
}
+static void sirfsoc_clocksource_suspend(struct clocksource *cs)
+{
+ int i;
+
+ writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
+
+ for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
+ sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+}
+
+static void sirfsoc_clocksource_resume(struct clocksource *cs)
+{
+ int i;
+
+ for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++)
+ writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]);
+
+ writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
+ writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
+}
+
static struct clock_event_device sirfsoc_clockevent = {
.name = "sirfsoc_clockevent",
.rating = 200,
@@ -120,6 +152,8 @@
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.read = sirfsoc_timer_read,
+ .suspend = sirfsoc_clocksource_suspend,
+ .resume = sirfsoc_clocksource_resume,
};
static struct irqaction sirfsoc_timer_irq = {
@@ -133,14 +167,14 @@
/* Overwrite weak default sched_clock with more precise one */
unsigned long long notrace sched_clock(void)
{
- static int is_mapped = 0;
+ static int is_mapped;
/*
* sched_clock is called earlier than .init of sys_timer
* if we map timer memory in .init of sys_timer, system
* will panic due to illegal memory access
*/
- if(!is_mapped) {
+ if (!is_mapped) {
sirfsoc_of_timer_map();
is_mapped = 1;
}
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index cd19309..61d3c72 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,6 +2,27 @@
menu "Intel PXA2xx/PXA3xx Implementations"
+config ARCH_PXA_V7
+ bool "ARMv7 (PXA95x) based systems"
+
+if ARCH_PXA_V7
+comment "Marvell Dev Platforms (sorted by hardware release time)"
+config MACH_TAVOREVB3
+ bool "PXA95x Development Platform (aka TavorEVB III)"
+ select CPU_PXA955
+
+config MACH_SAARB
+ bool "PXA955 Handheld Platform (aka SAARB)"
+ select CPU_PXA955
+endif
+
+config PXA_V7_MACH_AUTO
+ def_bool y
+ depends on ARCH_PXA_V7
+ depends on !MACH_SAARB
+ select MACH_TAVOREVB3
+
+if !ARCH_PXA_V7
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config ARCH_LUBBOCK
@@ -41,19 +62,11 @@
select PXA3xx
select CPU_PXA930
-config MACH_TAVOREVB3
- bool "PXA95x Development Platform (aka TavorEVB III)"
- select CPU_PXA950
-
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select CPU_PXA930
-config MACH_SAARB
- bool "PXA955 Handheld Platform (aka SAARB)"
- select CPU_PXA955
-
comment "Third Party Dev Platforms (sorted by vendor name)"
config ARCH_PXA_IDP
@@ -414,6 +427,7 @@
bool "Palm Centro 685 (GSM)"
default y
depends on ARCH_PXA_PALM
+ select MACH_PALM27X
select PXA27x
select IWMMXT
select PALM_TREO
@@ -425,6 +439,7 @@
bool "Palm Treo 680"
default y
depends on ARCH_PXA_PALM
+ select MACH_PALM27X
select PXA27x
select IWMMXT
select PALM_TREO
@@ -436,15 +451,18 @@
bool "Raumfeld Controller"
select PXA3xx
select CPU_PXA300
+ select POWER_SUPPLY
select HAVE_PWM
config MACH_RAUMFELD_CONNECTOR
bool "Raumfeld Connector"
+ select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
config MACH_RAUMFELD_SPEAKER
bool "Raumfeld Speaker"
+ select POWER_SUPPLY
select PXA3xx
select CPU_PXA300
@@ -598,7 +616,7 @@
bool "Zipit Z2 Handheld"
select PXA27x
select HAVE_PWM
-
+endif
endmenu
config PXA25x
@@ -688,6 +706,8 @@
config SHARPSL_PM_MAX1111
bool
select HWMON
+ select SPI
+ select SPI_MASTER
select SENSORS_MAX1111
config PXA_HAVE_ISA_IRQS
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index cc39d17..be0f7df 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -19,7 +19,7 @@
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
+obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 7765d67..fc0b854 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -591,7 +591,7 @@
BALLOON3_NAND_CONTROL_REG);
if (balloon3_ctl_set)
__raw_writel(balloon3_ctl_set,
- BALLOON3_NAND_CONTROL_REG |
+ BALLOON3_NAND_CONTROL_REG +
BALLOON3_FPGA_SETnCLR);
}
@@ -608,7 +608,7 @@
__raw_writew(
BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
- BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
/* Deassert correct nCE line */
__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
@@ -626,7 +626,7 @@
int ret;
__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
- BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL2_REG + BALLOON3_FPGA_SETnCLR);
ver = __raw_readw(BALLOON3_FPGA_VER);
if (ver < 0x4f08)
@@ -649,7 +649,7 @@
BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
BALLOON3_NAND_CONTROL_FLWP,
- BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
+ BALLOON3_NAND_CONTROL_REG + BALLOON3_FPGA_SETnCLR);
return 0;
err2:
@@ -807,7 +807,7 @@
static struct map_desc balloon3_io_desc[] __initdata = {
{ /* CPLD/FPGA */
- .virtual = BALLOON3_FPGA_VIRT,
+ .virtual = (unsigned long)BALLOON3_FPGA_VIRT,
.pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS),
.length = BALLOON3_FPGA_LENGTH,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 6bf479d..ebd9259 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -26,7 +26,7 @@
#include <asm/hardware/it8152.h>
-unsigned long it8152_base_address;
+void __iomem *it8152_base_address;
static int cmx2xx_it8152_irq_gpio;
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 349896c..f2e4190 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -39,7 +39,7 @@
#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40)
/* virtual addresses for statically mapped regions */
-#define CMX2XX_VIRT_BASE (0xe8000000)
+#define CMX2XX_VIRT_BASE (void __iomem *)(0xe8000000)
#define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE)
/* physical address if local-bus attached devices */
@@ -482,7 +482,7 @@
/* Map PCI companion statically */
static struct map_desc cmx2xx_io_desc[] __initdata = {
[0] = { /* PCI bridge */
- .virtual = CMX2XX_IT8152_VIRT,
+ .virtual = (unsigned long)CMX2XX_IT8152_VIRT,
.pfn = __phys_to_pfn(PXA_CS4_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index d2da301..3a7387f 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -775,7 +775,6 @@
static void __init cm_x300_init_wi2wi(void)
{
- int bt_reset, wlan_en;
int err;
if (system_rev < 130) {
@@ -791,12 +790,11 @@
}
udelay(10);
- gpio_set_value(bt_reset, 0);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 0);
udelay(10);
- gpio_set_value(bt_reset, 1);
+ gpio_set_value(cm_x300_wi2wi_gpios[1].gpio, 1);
- gpio_free(wlan_en);
- gpio_free(bt_reset);
+ gpio_free_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
}
/* MFP */
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
index f4c0365..bbf9df3 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -20,7 +20,7 @@
* Peripheral Bus
*/
#define PERIPH_PHYS 0x40000000
-#define PERIPH_VIRT 0xf2000000
+#define PERIPH_VIRT IOMEM(0xf2000000)
#define PERIPH_SIZE 0x02000000
/*
@@ -28,21 +28,21 @@
*/
#define PXA2XX_SMEMC_PHYS 0x48000000
#define PXA3XX_SMEMC_PHYS 0x4a000000
-#define SMEMC_VIRT 0xf6000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
#define SMEMC_SIZE 0x00100000
/*
* Dynamic Memory Controller (only on PXA3xx)
*/
#define DMEMC_PHYS 0x48100000
-#define DMEMC_VIRT 0xf6100000
+#define DMEMC_VIRT IOMEM(0xf6100000)
#define DMEMC_SIZE 0x00100000
/*
* Internal Memory Controller (PXA27x and later)
*/
#define IMEMC_PHYS 0x58000000
-#define IMEMC_VIRT 0xfe000000
+#define IMEMC_VIRT IOMEM(0xfe000000)
#define IMEMC_SIZE 0x00100000
#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 7074e76..6d7eab3 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -23,7 +23,7 @@
};
#define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
-#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
+#define BALLOON3_FPGA_VIRT IOMEM(0xf1000000) /* as per balloon2 */
#define BALLOON3_FPGA_LENGTH 0x01000000
#define BALLOON3_FPGA_SETnCLR (0x1000)
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
index 41b4c93..576868f 100644
--- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -25,7 +25,7 @@
#define GPIO_REGS_VIRT io_p2v(0x40E00000)
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+#define GPIO_REG(x) (GPIO_REGS_VIRT + (x))
/* GPIO Pin Level Registers */
#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index de63ca3..8184669 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -36,22 +36,23 @@
* Note that not all PXA2xx chips implement all those addresses, and the
* kernel only maps the minimum needed range of this mapping.
*/
-#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
#ifndef __ASSEMBLY__
-
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
+# define IOMEM(x) ((void __iomem *)(x))
+# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x)))
/* With indexed regs we don't want to feed the index through io_p2v()
especially if it is a variable, otherwise horrible code will result. */
# define __REG2(x,y) \
- (*(volatile u32 *)((u32)&__REG(x) + (y)))
+ (*(volatile u32 __iomem*)((u32)&__REG(x) + (y)))
# define __PREG(x) (io_v2p((u32)&(x)))
#else
+# define IOMEM(x) x
# define __REG(x) io_p2v(x)
# define __PREG(x) io_v2p(x)
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index cd07009..4edc712 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -13,13 +13,13 @@
#define __ASM_ARCH_LPD270_H
#define LPD270_CPLD_PHYS PXA_CS2_PHYS
-#define LPD270_CPLD_VIRT 0xf0000000
+#define LPD270_CPLD_VIRT IOMEM(0xf0000000)
#define LPD270_CPLD_SIZE 0x00100000
#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000)
/* CPLD registers */
-#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CPLD_REG(x) (LPD270_CPLD_VIRT + (x))
#define LPD270_CONTROL LPD270_CPLD_REG(0x00)
#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04)
#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08)
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
index 297387e..990d2bf 100644
--- a/arch/arm/mach-pxa/include/mach/mtd-xip.h
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -16,7 +16,6 @@
#define __ARCH_PXA_MTD_XIP_H__
#include <mach/regs-ost.h>
-#include <mach/regs-intc.h>
#define xip_irqpending() (ICIP & ICMR)
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/include/mach/palm27x.h
index 0a5e5ea..f80bbe2 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/include/mach/palm27x.h
@@ -34,7 +34,7 @@
extern void __init palm27x_lcd_init(int power,
struct pxafb_mode_info *mode);
#else
-static inline void palm27x_lcd_init(int power, struct pxafb_mode_info *mode) {}
+#define palm27x_lcd_init(power, mode) do {} while (0)
#endif
#if defined(CONFIG_USB_GADGET_PXA27X) || \
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 10abc4f..7074a6e 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -71,7 +71,7 @@
/* Various addresses */
#define PALMTX_PCMCIA_PHYS 0x28000000
-#define PALMTX_PCMCIA_VIRT 0xf0000000
+#define PALMTX_PCMCIA_VIRT IOMEM(0xf0000000)
#define PALMTX_PCMCIA_SIZE 0x100000
#define PALMTX_PHYS_RAM_START 0xa0000000
@@ -84,8 +84,8 @@
#define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24))
#define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25))
-#define PALMTX_NAND_ALE_VIRT 0xff100000
-#define PALMTX_NAND_CLE_VIRT 0xff200000
+#define PALMTX_NAND_ALE_VIRT IOMEM(0xff100000)
+#define PALMTX_NAND_CLE_VIRT IOMEM(0xff200000)
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h
index b9b1bdc..7cff640 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x.h
@@ -1,6 +1,7 @@
#ifndef __MACH_PXA27x_H
#define __MACH_PXA27x_H
+#include <linux/suspend.h>
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
@@ -21,6 +22,7 @@
extern void __init pxa27x_map_io(void);
extern void __init pxa27x_init_irq(void);
extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern void pxa27x_cpu_pm_enter(suspend_state_t state);
#define pxa27x_handle_irq ichp_handle_irq
diff --git a/arch/arm/mach-pxa/include/mach/pxa95x.h b/arch/arm/mach-pxa/include/mach/pxa95x.h
new file mode 100644
index 0000000..cbb097c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa95x.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_PXA95X_H
+#define __MACH_PXA95X_H
+
+#include <mach/pxa3xx.h>
+#include <mach/mfp-pxa930.h>
+
+#endif /* __MACH_PXA95X_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 01a45ac..486b4c5 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -158,5 +158,18 @@
void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
unsigned long pxafb_get_hsync_time(struct device *dev);
+#ifdef CONFIG_FB_PXA_SMARTPANEL
extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
extern int pxafb_smart_flush(struct fb_info *info);
+#else
+static inline int pxafb_smart_queue(struct fb_info *info,
+ uint16_t *cmds, int n)
+{
+ return 0;
+}
+
+static inline int pxafb_smart_flush(struct fb_info *info)
+{
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
index 654adc9..b7de471 100644
--- a/arch/arm/mach-pxa/include/mach/smemc.h
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -13,7 +13,7 @@
#define PXA2XX_SMEMC_BASE 0x48000000
#define PXA3XX_SMEMC_BASE 0x4a000000
-#define SMEMC_VIRT 0xf6000000
+#define SMEMC_VIRT IOMEM(0xf6000000)
#define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */
#define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index 0641f31..56024f8 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -68,7 +68,7 @@
* Be gentle, and remap that over 32kB...
*/
-#define ZEUS_CPLD (0xf0000000)
+#define ZEUS_CPLD IOMEM(0xf0000000)
#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000)
#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000)
#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000)
@@ -76,7 +76,7 @@
/* CPLD register bits */
#define ZEUS_CPLD_CONTROL_CF_RST 0x01
-#define ZEUS_PC104IO (0xf1000000)
+#define ZEUS_PC104IO IOMEM(0xf1000000)
#define ZEUS_SRAM_SIZE (256 * 1024)
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index ea24998..ecca976 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -19,7 +19,7 @@
extern int lcd_id;
extern int lcd_orientation;
-#ifdef CONFIG_CPU_PXA300
+#ifdef CONFIG_MACH_ZYLONITE300
extern void zylonite_pxa300_init(void);
#else
static inline void zylonite_pxa300_init(void)
@@ -29,7 +29,7 @@
}
#endif
-#ifdef CONFIG_CPU_PXA320
+#ifdef CONFIG_MACH_ZYLONITE320
extern void zylonite_pxa320_init(void);
#else
static inline void zylonite_pxa320_init(void)
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 8d9200f..532c5d3 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -26,7 +26,7 @@
#include "generic.h"
-#define IRQ_BASE (void __iomem *)io_p2v(0x40d00000)
+#define IRQ_BASE io_p2v(0x40d00000)
#define ICIP (0x000)
#define ICMR (0x004)
@@ -64,7 +64,7 @@
0x40d00130,
};
- return (void __iomem *)io_p2v(phys_base[i]);
+ return io_p2v(phys_base[i]);
}
void pxa_mask_irq(struct irq_data *d)
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 64540d9..1dd5302 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -479,7 +479,7 @@
static struct map_desc lpd270_io_desc[] __initdata = {
{
- .virtual = LPD270_CPLD_VIRT,
+ .virtual = (unsigned long)LPD270_CPLD_VIRT,
.pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
.length = LPD270_CPLD_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 7346fbf..94e9708 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -423,6 +423,7 @@
palmtreo_leds_init();
}
+#ifdef CONFIG_MACH_TREO680
static void __init treo680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
@@ -430,7 +431,9 @@
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, GPIO_NR_TREO680_SD_READONLY,
GPIO_NR_TREO680_SD_POWER, 0);
}
+#endif
+#ifdef CONFIG_MACH_CENTRO
static void __init centro_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
@@ -438,7 +441,9 @@
palm27x_mmc_init(GPIO_NR_TREO_SD_DETECT_N, -1,
GPIO_NR_CENTRO_SD_POWER, 1);
}
+#endif
+#ifdef CONFIG_MACH_TREO680
MACHINE_START(TREO680, "Palm Treo 680")
.atag_offset = 0x100,
.map_io = pxa27x_map_io,
@@ -448,7 +453,9 @@
.timer = &pxa_timer,
.init_machine = treo680_init,
MACHINE_END
+#endif
+#ifdef CONFIG_MACH_CENTRO
MACHINE_START(CENTRO, "Palm Centro 685")
.atag_offset = 0x100,
.map_io = pxa27x_map_io,
@@ -458,3 +465,4 @@
.timer = &pxa_timer,
.init_machine = centro_init,
MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 2b9e76f..4e3e459 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -247,7 +247,7 @@
unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+ char __iomem *nandaddr = this->IO_ADDR_W;
if (cmd == NAND_CMD_NONE)
return;
@@ -315,17 +315,17 @@
******************************************************************************/
static struct map_desc palmtx_io_desc[] __initdata = {
{
- .virtual = PALMTX_PCMCIA_VIRT,
+ .virtual = (unsigned long)PALMTX_PCMCIA_VIRT,
.pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
.length = PALMTX_PCMCIA_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = PALMTX_NAND_ALE_VIRT,
+ .virtual = (unsigned long)PALMTX_NAND_ALE_VIRT,
.pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
.length = SZ_1M,
.type = MT_DEVICE,
}, {
- .virtual = PALMTX_NAND_CLE_VIRT,
+ .virtual = (unsigned long)PALMTX_NAND_CLE_VIRT,
.pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
.length = SZ_1M,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 9a9c539..6d38c65 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -394,9 +394,9 @@
}
if (flags & SOCAM_DATAWIDTH_8)
- gpio_set_value(gpio_bus_switch, 1);
+ gpio_set_value_cansleep(gpio_bus_switch, 1);
else
- gpio_set_value(gpio_bus_switch, 0);
+ gpio_set_value_cansleep(gpio_bus_switch, 0);
return 0;
}
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 8746e10..f05f948 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -325,7 +325,7 @@
static struct map_desc pxa25x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 2bb5cf8..bc5a98e 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -391,7 +391,7 @@
static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index ce7168b..e28dfb8 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -265,6 +265,7 @@
return err;
}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_start_hc);
void pxa3xx_u2d_stop_hc(struct usb_bus *host)
{
@@ -277,6 +278,7 @@
clk_disable(u2d->clk);
}
+EXPORT_SYMBOL_GPL(pxa3xx_u2d_stop_hc);
static int pxa3xx_u2d_probe(struct platform_device *pdev)
{
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f940a13..0737c59 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -393,7 +393,7 @@
static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = SMEMC_VIRT,
+ .virtual = (unsigned long)SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3c988b6f..3e999e3 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -24,6 +24,7 @@
#include <mach/hardware.h>
#include <mach/mfp.h>
#include <mach/mfp-pxa930.h>
+#include <mach/pxa95x.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 84ed72d..ead32c9 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -686,7 +686,8 @@
*/
PSPR = 0x0;
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET);
+ pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
+ pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
}
#else
#define z2_power_off NULL
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index c424e7d..498b83b 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -860,25 +860,25 @@
static struct map_desc zeus_io_desc[] __initdata = {
{
- .virtual = ZEUS_CPLD_VERSION,
+ .virtual = (unsigned long)ZEUS_CPLD_VERSION,
.pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_CPLD_ISA_IRQ,
+ .virtual = (unsigned long)ZEUS_CPLD_ISA_IRQ,
.pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_CPLD_CONTROL,
+ .virtual = (unsigned long)ZEUS_CPLD_CONTROL,
.pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
.length = 0x1000,
.type = MT_DEVICE,
},
{
- .virtual = ZEUS_PC104IO,
+ .virtual = (unsigned long)ZEUS_PC104IO,
.pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS),
.length = 0x00800000,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index a87523d..ac1aed2 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -69,7 +69,7 @@
:
: "memory", "cc");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index fb4901c..8cc372d 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -10,23 +10,10 @@
* published by the Free Software Foundation.
*/
-#if defined(CONFIG_MACH_REALVIEW_EB) || \
- defined(CONFIG_MACH_REALVIEW_PB11MP) || \
- defined(CONFIG_MACH_REALVIEW_PBA8) || \
- defined(CONFIG_MACH_REALVIEW_PBX)
-#ifndef DEBUG_LL_UART_OFFSET
+#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
#define DEBUG_LL_UART_OFFSET 0x00009000
-#elif DEBUG_LL_UART_OFFSET != 0x00009000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
-#endif
-
-#ifdef CONFIG_MACH_REALVIEW_PB1176
-#ifndef DEBUG_LL_UART_OFFSET
+#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
#define DEBUG_LL_UART_OFFSET 0x0010c000
-#elif DEBUG_LL_UART_OFFSET != 0x0010c000
-#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
-#endif
#endif
#ifndef DEBUG_LL_UART_OFFSET
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 7245a55..3700cf3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -8,7 +8,6 @@
select CPU_ARM920T
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
- select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
@@ -28,11 +27,6 @@
help
Power Management code common to S3C2410 and better
-config S3C2410_GPIO
- bool
- help
- GPIO code for S3C2410 and similar processors
-
config SIMTEC_NOR
bool
help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 8169535..782fd81 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -13,7 +13,6 @@
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
-obj-$(CONFIG_S3C2410_GPIO) += gpio.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 0d8e043..dbe43df 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -47,38 +47,26 @@
.channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -90,12 +78,10 @@
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
deleted file mode 100644
index 9664e01..0000000
--- a/arch/arm/mach-s3c2410/gpio.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio-fns.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config)
-{
- void __iomem *reg = S3C24XX_EINFLT0;
- unsigned long flags;
- unsigned long val;
-
- if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
- return -EINVAL;
-
- config &= 0xff;
-
- pin -= S3C2410_GPG(8);
- reg += pin & ~3;
-
- local_irq_save(flags);
-
- /* update filter width and clock source */
-
- val = __raw_readl(reg);
- val &= ~(0xff << ((pin & 3) * 8));
- val |= config << ((pin & 3) * 8);
- __raw_writel(val, reg);
-
- /* update filter enable */
-
- val = __raw_readl(S3C24XX_EXTINT2);
- val &= ~(1 << ((pin * 4) + 3));
- val |= on << ((pin * 4) + 3);
- __raw_writel(val, S3C24XX_EXTINT2);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 425552d..4cf495f 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -14,9 +14,53 @@
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
-#include <plat/map.h>
-#define S3C2410_ADDR(x) S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET (0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART SZ_1M
+#define S3C24XX_SZ_IIS SZ_1M
+#define S3C24XX_SZ_ADC SZ_1M
+#define S3C24XX_SZ_SPI SZ_1M
+#define S3C24XX_SZ_SDI SZ_1M
+#define S3C24XX_SZ_NAND SZ_1M
+#define S3C24XX_SZ_GPIO SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
@@ -75,10 +119,8 @@
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
-#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_PA_EBI (0x48800000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
/* physical addresses of all the chip-select areas */
@@ -100,12 +142,10 @@
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
-#define S3C24XX_PA_UART S3C2410_PA_UART
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2cf4e5..b8b9029 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -9,7 +9,6 @@
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
- select S3C2410_GPIO
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 6c48a91..7e4d95f 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,7 +12,6 @@
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
-obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 7abecfc..c61e326 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -50,64 +50,46 @@
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
.channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
- .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
.channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
.channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 3404a87..0000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- unsigned long offs = pin - chip->chip.base;
- unsigned long flags;
- unsigned long slpcon;
-
- offs *= 2;
-
- if (pin < S3C2410_GPB(0))
- return -EINVAL;
-
- if (pin >= S3C2410_GPF(0) &&
- pin <= S3C2410_GPG(16))
- return -EINVAL;
-
- if (pin > S3C2410_GPH(16))
- return -EINVAL;
-
- local_irq_save(flags);
-
- slpcon = __raw_readl(chip->base + 0x0C);
-
- slpcon &= ~(3 << offs);
- slpcon |= state << offs;
-
- __raw_writel(slpcon, chip->base + 0x0C);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 50825a3..c461fb8 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -8,7 +8,6 @@
select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
- select S3C2410_GPIO
select S3C2440_DMA if S3C2410_DMA
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
@@ -20,7 +19,6 @@
select CPU_ARM920T
select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
- select S3C2410_GPIO
select S3C2410_PM if PM
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 3b0529f..0e73f8f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -48,38 +48,26 @@
.channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
.channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -91,31 +79,26 @@
.name = "i2s-sdi",
.channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
.channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
.channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
.channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 3f65868..fe52151 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -54,68 +54,46 @@
[DMACH_SDI] = {
.name = "sdi",
.channels = MAP(S3C2443_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_0),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_0),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_0),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_0),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2443_DMAREQSEL_UART0_1),
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2443_DMAREQSEL_UART1_1),
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2443_DMAREQSEL_UART2_1),
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART3_SRC2] = {
.name = "uart3",
.channels = MAP(S3C2443_DMAREQSEL_UART3_1),
- .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
- .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
@@ -124,27 +102,22 @@
[DMACH_I2S_IN] = {
.name = "i2s-sdi",
.channels = MAP(S3C2443_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2443_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
},
[DMACH_PCM_IN] = {
.name = "pcm-in",
.channels = MAP(S3C2443_DMAREQSEL_PCMIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_PCM_OUT] = {
.name = "pcm-out",
.channels = MAP(S3C2443_DMAREQSEL_PCMOUT),
- .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
},
[DMACH_MIC_IN] = {
.name = "mic-in",
.channels = MAP(S3C2443_DMAREQSEL_MICIN),
- .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
},
};
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 8dc0576..c704783 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -44,16 +44,16 @@
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x36400000,
- .idmask = 0xfffff000,
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
.init_clocks = s3c6400_init_clocks,
.init_uarts = s3c6400_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
}, {
- .idcode = 0x36410100,
- .idmask = 0xffffff00,
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
.init_clocks = s3c6410_init_clocks,
.init_uarts = s3c6410_init_uarts,
@@ -141,23 +141,15 @@
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
init_consistent_dma_size(SZ_8M);
- idcode = __raw_readl(S3C_VA_SYS + 0x118);
- if (!idcode) {
- /* S3C6400 has the ID register in a different place,
- * and needs a write before it can be read. */
+ /* detect cpu id */
+ s3c64xx_init_cpu();
- __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
- idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
- }
-
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
static __init int s3c64xx_sysdev_init(void)
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index a1f13f0..23a1d71 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -16,6 +16,7 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s3c.h>
/*
* Post-mux Chip Select Regions Xm0CSn_
@@ -83,7 +84,6 @@
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@@ -94,16 +94,10 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
#define S3C64XX_PA_USB_HSPHY (0x7C100000)
-#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0 (S3C_VA_IRQ + 0x00)
-#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
@@ -119,7 +113,6 @@
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 4c76e08..8065803 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -329,9 +329,6 @@
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
- &s3c_device_adc,
- &s3c_device_rtc,
- &s3c_device_ts,
&s3c_device_timer[0],
&s3c64xx_device_iis0,
&s3c64xx_device_iis1,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index e91f63f..fb8969a 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -205,12 +205,6 @@
.dev.platform_data = &mini6410_lcd_power_data,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static struct platform_device *mini6410_devices[] __initdata = {
&mini6410_device_eth,
&s3c_device_hsmmc0,
@@ -319,7 +313,7 @@
s3c_nand_set_platdata(&mini6410_nand_info);
s3c_fb_set_platdata(&mini6410_lcd_pdata);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 10870cb..93170d4 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -198,12 +198,6 @@
&s3c_device_ohci,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
static void __init real6410_map_io(void)
{
u32 tmp;
@@ -300,7 +294,7 @@
s3c_fb_set_platdata(&real6410_lcd_pdata);
s3c_nand_set_platdata(&real6410_nand_info);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 7b66ede..5f147c3 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -619,12 +619,6 @@
{ I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
.no = S3C64XX_GPF(15),
@@ -666,7 +660,7 @@
samsung_keypad_set_platdata(&smdk6410_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index ac825e8..1fd9c79 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -21,6 +21,7 @@
#include <mach/regs-clock.h>
#include <mach/spi-clocks.h>
+#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
@@ -185,11 +186,8 @@
void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
- unsigned int id;
struct s3c64xx_spi_info *pd;
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
@@ -199,7 +197,7 @@
switch (cntrlr) {
case 0:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi0_pdata;
else
pd = &s5p6440_spi0_pdata;
@@ -207,7 +205,7 @@
s5p64x0_device_spi0.dev.platform_data = pd;
break;
case 1:
- if (id == 0x50000)
+ if (soc_is_s5p6450())
pd = &s5p6450_spi1_pdata;
else
pd = &s5p6440_spi1_pdata;
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944..0e5b3e6 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -28,6 +28,7 @@
#include <mach/irqs.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/s3c-pl330-pdata.h>
@@ -133,11 +134,7 @@
static int __init s5p64x0_dma_init(void)
{
- unsigned int id;
-
- id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
- if (id == 0x50000)
+ if (soc_is_s5p6450())
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
else
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
index e7fb3b0..700dac6 100644
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -19,6 +19,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
+#include <plat/cpu.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
@@ -473,14 +474,10 @@
static int __init s5p64x0_gpiolib_init(void)
{
- unsigned int chipid;
-
- chipid = __raw_readl(S5P64X0_SYS_ID);
-
s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
ARRAY_SIZE(s5p64x0_gpio_cfgs));
- if ((chipid & 0xff000) == 0x50000) {
+ if (soc_is_s5p6450()) {
samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
ARRAY_SIZE(s5p6450_gpio_2bit));
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index fe7380f..494e1a8 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/io.h>
+#include <plat/cpu.h>
#include <plat/regs-irqtype.h>
#include <plat/gpio-cfg.h>
@@ -67,7 +68,7 @@
__raw_writel(ctrl, S5P64X0_EINT0CON0);
/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
- if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+ if (soc_is_s5p6450())
s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
else
s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 3b84e9b..88857f5 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -129,12 +129,6 @@
/* To be populated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
.no = S5P6440_GPF(15),
@@ -155,7 +149,7 @@
static void __init smdk6440_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index d99d29b..e1b277b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -148,12 +148,6 @@
{ I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
.no = S5P6450_GPF(15),
@@ -174,7 +168,7 @@
static void __init smdk6450_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 688f45b..26f5c91 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -203,12 +203,6 @@
&s5pc100_device_spdif,
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
.no = S5PC100_GPD(0),
@@ -228,7 +222,7 @@
static void __init smdkc100_machine_init(void)
{
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
/* I2C */
s3c_i2c0_set_platdata(NULL);
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 69dd87c..aaeb44a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -14,7 +14,6 @@
select S3C_PL330_DMA
select S5P_EXT_INT
select S5P_HRT
- select S5PV210_PM if PM
help
Enable S5PV210 CPU support
@@ -169,9 +168,4 @@
endmenu
-config S5PV210_PM
- bool
- help
- Power Management code common to S5PV210
-
endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 599a3c0..ef7e466 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -14,7 +14,7 @@
obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o
obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
-obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
# machine support
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index e73e3b6d..a9106c3 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -265,12 +265,6 @@
/* To Be Updated */
};
-static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
- .delay = 10000,
- .presc = 49,
- .oversampling_shift = 2,
-};
-
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
.no = S5PV210_GPD0(3),
@@ -296,7 +290,7 @@
smdkv210_dm9000_init();
samsung_keypad_set_platdata(&smdkv210_keypad_data);
- s3c24xx_ts_set_platdata(&s3c_ts_platform);
+ s3c24xx_ts_set_platdata(NULL);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 5b7edad..f9f66c2 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -933,7 +933,7 @@
static struct sh_csi2_client_config csi2_clients[] = {
{
.phy = SH_CSI2_PHY_MAIN,
- .lanes = 3,
+ .lanes = 0, /* default: 2 lanes */
.channel = 0,
.pdev = &ap4evb_camera,
},
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3689ad2..6820423 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1223,9 +1223,10 @@
.width = 640,
.height = 480,
},
- .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
- SOCAM_DATA_ACTIVE_HIGH,
+ .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH,
+ .mbus_type = V4L2_MBUS_PARALLEL,
.set_capture = camera_set_capture,
};
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 3ffdbc9..be1ade7 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -74,6 +74,8 @@
int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
{
+ cpu = cpu_logical_map(cpu);
+
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
@@ -87,6 +89,8 @@
void __init sh73a0_smp_prepare_cpus(void)
{
+ int cpu = cpu_logical_map(0);
+
scu_enable(scu_base_addr());
/* Map the reset vector (in headsmp.S) */
@@ -94,5 +98,5 @@
__raw_writel(__pa(shmobile_secondary_vector), __io(SBAR));
/* enable cache coherency on CPU0 */
- modify_scu_cpu_psr(0, 3 << (0 * 8));
+ modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d82ebab..91aff7c 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -69,6 +69,12 @@
help
Support for the Wario version of Seaboard
+config MACH_VENTANA
+ bool "Ventana board"
+ select MACH_TEGRA_DT
+ help
+ Support for the nVidia Ventana development platform
+
choice
prompt "Low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index f11b910..91a07e1 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -31,6 +31,7 @@
obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o
obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o
+obj-${CONFIG_MACH_TEGRA_DT} += board-seaboard-pinmux.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o
obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 5e870d2..bd12c9f 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -4,3 +4,4 @@
dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
+dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 9f47e04..d368f8d 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -47,7 +47,7 @@
void harmony_pinmux_init(void);
void seaboard_pinmux_init(void);
-
+void ventana_pinmux_init(void);
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
@@ -80,9 +80,19 @@
{}
};
+static struct {
+ char *machine;
+ void (*init)(void);
+} pinmux_configs[] = {
+ { "nvidia,harmony", harmony_pinmux_init },
+ { "nvidia,seaboard", seaboard_pinmux_init },
+ { "nvidia,ventana", ventana_pinmux_init },
+};
+
static void __init tegra_dt_init(void)
{
struct device_node *node;
+ int i;
node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
TEGRA_ARM_INT_DIST_BASE);
@@ -91,10 +101,15 @@
tegra_clk_init_from_table(tegra_dt_clk_init_table);
- if (of_machine_is_compatible("nvidia,harmony"))
- harmony_pinmux_init();
- else if (of_machine_is_compatible("nvidia,seaboard"))
- seaboard_pinmux_init();
+ for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
+ if (of_machine_is_compatible(pinmux_configs[i].machine)) {
+ pinmux_configs[i].init();
+ break;
+ }
+ }
+
+ WARN(i == ARRAY_SIZE(pinmux_configs),
+ "Unknown platform! Pinmuxing not initialized\n");
/*
* Finished with the static registrations now; fill in the missing
@@ -106,6 +121,7 @@
static const char * tegra_dt_board_compat[] = {
"nvidia,harmony",
"nvidia,seaboard",
+ "nvidia,ventana",
NULL
};
diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c
index 4d63e2e..e99b456 100644
--- a/arch/arm/mach-tegra/board-harmony-pinmux.c
+++ b/arch/arm/mach-tegra/board-harmony-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-harmony.h"
+#include "devices.h"
static struct tegra_pingroup_config harmony_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,6 +141,11 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
@@ -155,6 +161,8 @@
void harmony_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 5ad8b2f..21d1285 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -18,10 +18,11 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-
+#include <linux/io.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6586x.h>
+#include <mach/iomap.h>
#include <mach/irqs.h>
#include "board-harmony.h"
@@ -113,6 +114,16 @@
int __init harmony_regulator_init(void)
{
+ void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
+ u32 pmc_ctrl;
+
+ /*
+ * Configure the power management controller to trigger PMU
+ * interrupts when low
+ */
+ pmc_ctrl = readl(pmc + PMC_CTRL);
+ writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL);
+
i2c_register_board_info(3, harmony_regulators, 1);
return 0;
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 93c793f..f0bdc5e 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -49,7 +49,8 @@
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -117,6 +118,7 @@
&tegra_sdhci_device1,
&tegra_sdhci_device2,
&tegra_sdhci_device4,
+ &tegra_ehci3_device,
&tegra_i2s_device1,
&tegra_das_device,
&tegra_pcm_device,
@@ -140,6 +142,7 @@
{ "pll_a_out0", "pll_a", 11289600, true },
{ "cdev1", NULL, 0, true },
{ "i2s1", "pll_a_out0", 11289600, false},
+ { "usb3", "clk_m", 12000000, true },
{ NULL, NULL, 0, 0},
};
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..fb20894 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -20,6 +20,7 @@
#include "gpio-names.h"
#include "board-paz00.h"
+#include "devices.h"
static struct tegra_pingroup_config paz00_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
@@ -140,15 +141,25 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD1_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD1_POWER, .enable = true },
{ .gpio = TEGRA_ULPI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_PWRN, .enable = true },
+ { .gpio = TEGRA_WIFI_RST, .enable = true },
+ { .gpio = TEGRA_WIFI_LED, .enable = true },
};
void paz00_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fbc9e0e..55c55ba 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -26,6 +26,8 @@
#include <linux/pda_power.h>
#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/rfkill-gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -35,7 +37,6 @@
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "board-paz00.h"
@@ -45,10 +46,22 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
+ /* serial port on JP1 */
+ .membase = IO_ADDRESS(TEGRA_UARTA_BASE),
+ .mapbase = TEGRA_UARTA_BASE,
+ .irq = INT_UARTA,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 216000000,
+ }, {
+ /* serial port on mini-pcie */
.membase = IO_ADDRESS(TEGRA_UARTD_BASE),
.mapbase = TEGRA_UARTD_BASE,
.irq = INT_UARTD,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -65,10 +78,48 @@
},
};
+static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
+ .name = "wifi_rfkill",
+ .reset_gpio = TEGRA_WIFI_RST,
+ .shutdown_gpio = TEGRA_WIFI_PWRN,
+ .type = RFKILL_TYPE_WLAN,
+};
+
+static struct platform_device wifi_rfkill_device = {
+ .name = "rfkill_gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wifi_rfkill_platform_data,
+ },
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "wifi-led",
+ .default_trigger = "rfkill0",
+ .gpio = TEGRA_WIFI_LED,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
static struct platform_device *paz00_devices[] __initdata = {
&debug_uart,
- &tegra_sdhci_device1,
&tegra_sdhci_device4,
+ &tegra_sdhci_device1,
+ &wifi_rfkill_device,
+ &leds_gpio,
};
static void paz00_i2c_init(void)
@@ -94,7 +145,14 @@
static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
/* name parent rate enabled */
+ { "uarta", "pll_p", 216000000, true },
{ "uartd", "pll_p", 216000000, true },
+
+ { "pll_p_out4", "pll_p", 24000000, true },
+ { "usbd", "clk_m", 12000000, false },
+ { "usb2", "clk_m", 12000000, false },
+ { "usb3", "clk_m", 12000000, false },
+
{ NULL, NULL, 0, 0},
};
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index 42ce863..8aff06e 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -19,11 +19,19 @@
#include <mach/gpio-tegra.h>
+/* SDCARD */
#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5
#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3
+
+/* ULPI */
#define TEGRA_ULPI_RST TEGRA_GPIO_PV0
+/* WIFI */
+#define TEGRA_WIFI_PWRN TEGRA_GPIO_PK5
+#define TEGRA_WIFI_RST TEGRA_GPIO_PD1
+#define TEGRA_WIFI_LED TEGRA_GPIO_PD0
+
void paz00_pinmux_init(void);
#endif
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 0bda495..fbce31d 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2010 NVIDIA Corporation
+ * Copyright (C) 2010,2011 NVIDIA Corporation
+ * Copyright (C) 2011 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -21,6 +22,7 @@
#include "gpio-names.h"
#include "board-seaboard.h"
+#include "devices.h"
#define DEFAULT_DRIVE(_name) \
{ \
@@ -49,7 +51,7 @@
{TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
- {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -133,7 +135,7 @@
{TEGRA_PINGROUP_SPDO, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIB, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
- {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL},
{TEGRA_PINGROUP_SPID, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIE, TEGRA_MUX_SPI1, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
{TEGRA_PINGROUP_SPIF, TEGRA_MUX_SPI1, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -157,24 +159,83 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static __initdata struct tegra_pingroup_config ventana_pinmux[] = {
+ {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_DDC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTB, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTC, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_DTD, TEGRA_MUX_VI, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_GMD, TEGRA_MUX_SFLASH, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_LPW0, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LPW2, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LSC1, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_LSCK, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_LSDA, TEGRA_MUX_RSVD4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_PTA, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SLXC, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SLXK, TEGRA_MUX_SDIO3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
+ {TEGRA_PINGROUP_SPIA, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIC, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+ {TEGRA_PINGROUP_SPIG, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
+};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
-
-static struct tegra_gpio_table gpio_table[] = {
+static struct tegra_gpio_table common_gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_CD, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_WP, .enable = true },
{ .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
+ { .gpio = TEGRA_GPIO_USB1, .enable = true },
};
-void __init seaboard_pinmux_init(void)
+static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
{
+ int i, j;
+ struct tegra_pingroup_config *new_pingroup, *base_pingroup;
+
+ /* Update base seaboard pinmux table with secondary board
+ * specific pinmux table table.
+ */
+ for (i = 0; i < size; i++) {
+ new_pingroup = &newtbl[i];
+ for (j = 0; j < ARRAY_SIZE(seaboard_pinmux); j++) {
+ base_pingroup = &seaboard_pinmux[j];
+ if (new_pingroup->pingroup == base_pingroup->pingroup) {
+ *base_pingroup = *new_pingroup;
+ break;
+ }
+ }
+ }
+}
+
+void __init seaboard_common_pinmux_init(void)
+{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
tegra_drive_pinmux_config_table(seaboard_drive_pinmux,
ARRAY_SIZE(seaboard_drive_pinmux));
- tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
+ tegra_gpio_config(common_gpio_table, ARRAY_SIZE(common_gpio_table));
}
+
+void __init seaboard_pinmux_init(void)
+{
+ seaboard_common_pinmux_init();
+}
+
+void __init ventana_pinmux_init(void)
+{
+ update_pinmux(ventana_pinmux, ARRAY_SIZE(ventana_pinmux));
+ seaboard_common_pinmux_init();
+}
+
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 9e98ac7..bf13ea3 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -25,9 +25,12 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <sound/wm8903.h>
+
#include <mach/iomap.h>
#include <mach/irqs.h>
#include <mach/sdhci.h>
+#include <mach/tegra_wm8903_pdata.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,7 +44,8 @@
static struct plat_serial8250_port debug_uart_platform_data[] = {
{
/* Memory and IRQ filled in before registration */
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
@@ -62,6 +66,12 @@
/* name parent rate enabled */
{ "uartb", "pll_p", 216000000, true},
{ "uartd", "pll_p", 216000000, true},
+ { "pll_a", "pll_p_out1", 56448000, true },
+ { "pll_a_out0", "pll_a", 11289600, true },
+ { "cdev1", NULL, 0, true },
+ { "i2s1", "pll_a_out0", 11289600, false},
+ { "usbd", "clk_m", 12000000, true},
+ { "usb3", "clk_m", 12000000, true},
{ NULL, NULL, 0, 0},
};
@@ -117,6 +127,22 @@
.is_8bit = 1,
};
+static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
+ .gpio_spkr_en = TEGRA_GPIO_SPKR_EN,
+ .gpio_hp_det = TEGRA_GPIO_HP_DET,
+ .gpio_hp_mute = -1,
+ .gpio_int_mic_en = -1,
+ .gpio_ext_mic_en = -1,
+};
+
+static struct platform_device seaboard_audio_device = {
+ .name = "tegra-snd-wm8903",
+ .id = 0,
+ .dev = {
+ .platform_data = &seaboard_audio_pdata,
+ },
+};
+
static struct platform_device *seaboard_devices[] __initdata = {
&debug_uart,
&tegra_pmu_device,
@@ -124,6 +150,10 @@
&tegra_sdhci_device3,
&tegra_sdhci_device1,
&seaboard_gpio_keys_device,
+ &tegra_i2s_device1,
+ &tegra_das_device,
+ &tegra_pcm_device,
+ &seaboard_audio_device,
};
static struct i2c_board_info __initdata isl29018_device = {
@@ -135,12 +165,56 @@
I2C_BOARD_INFO("adt7461", 0x4c),
};
+static struct wm8903_platform_data wm8903_pdata = {
+ .irq_active_low = 0,
+ .micdet_cfg = 0,
+ .micdet_delay = 100,
+ .gpio_base = SEABOARD_GPIO_WM8903(0),
+ .gpio_cfg = {
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ 0,
+ WM8903_GPIO_NO_CONFIG,
+ WM8903_GPIO_NO_CONFIG,
+ },
+};
+
+static struct i2c_board_info __initdata wm8903_device = {
+ I2C_BOARD_INFO("wm8903", 0x1a),
+ .platform_data = &wm8903_pdata,
+ .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
+};
+
+static int seaboard_ehci_init(void)
+{
+ int gpio_status;
+
+ gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO FAILED\n");
+ WARN_ON(1);
+ }
+
+ gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
+ if (gpio_status < 0) {
+ pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
+ WARN_ON(1);
+ }
+ gpio_set_value(TEGRA_GPIO_USB1, 1);
+
+ platform_device_register(&tegra_ehci1_device);
+ platform_device_register(&tegra_ehci3_device);
+
+ return 0;
+}
+
static void __init seaboard_i2c_init(void)
{
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
+ i2c_register_board_info(0, &wm8903_device, 1);
i2c_register_board_info(3, &adt7461_device, 1);
@@ -161,6 +235,8 @@
tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
+
+ seaboard_ehci_init();
}
static void __init tegra_seaboard_init(void)
@@ -182,6 +258,9 @@
debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
debug_uart_platform_data[0].irq = INT_UARTB;
+ seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
+ tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
+
seaboard_common_init();
seaboard_i2c_init();
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index 15b6c57..4c45d4c 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -19,6 +19,9 @@
#include <mach/gpio-tegra.h>
+#define SEABOARD_GPIO_TPS6586X(_x_) (TEGRA_NR_GPIOS + (_x_))
+#define SEABOARD_GPIO_WM8903(_x_) (SEABOARD_GPIO_TPS6586X(4) + (_x_))
+
#define TEGRA_GPIO_SD2_CD TEGRA_GPIO_PI5
#define TEGRA_GPIO_SD2_WP TEGRA_GPIO_PH1
#define TEGRA_GPIO_SD2_POWER TEGRA_GPIO_PI6
@@ -33,10 +36,11 @@
#define TEGRA_GPIO_MAGNETOMETER TEGRA_GPIO_PN5
#define TEGRA_GPIO_ISL29018_IRQ TEGRA_GPIO_PZ2
#define TEGRA_GPIO_AC_ONLINE TEGRA_GPIO_PV3
-
-#define TPS_GPIO_BASE TEGRA_NR_GPIOS
-
-#define TPS_GPIO_WWAN_PWR (TPS_GPIO_BASE + 2)
+#define TEGRA_GPIO_WWAN_PWR SEABOARD_GPIO_TPS6586X(2)
+#define TEGRA_GPIO_CDC_IRQ TEGRA_GPIO_PX3
+#define TEGRA_GPIO_SPKR_EN SEABOARD_GPIO_WM8903(2)
+#define TEGRA_GPIO_HP_DET TEGRA_GPIO_PX1
+#define TEGRA_GPIO_KAEN_HP_MUTE TEGRA_GPIO_PA5
void seaboard_pinmux_init(void);
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index bcb1916..4969dd2 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -21,6 +21,7 @@
#include "gpio-names.h"
#include "board-trimslice.h"
+#include "devices.h"
static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
{TEGRA_PINGROUP_ATA, TEGRA_MUX_IDE, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE},
@@ -141,6 +142,11 @@
{TEGRA_PINGROUP_XM2D, TEGRA_MUX_NONE, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL},
};
+static struct platform_device *pinmux_devices[] = {
+ &tegra_gpio_device,
+ &tegra_pinmux_device,
+};
+
static struct tegra_gpio_table gpio_table[] = {
{ .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */
{ .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */
@@ -151,6 +157,7 @@
void __init trimslice_pinmux_init(void)
{
+ platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index e3d9ec2..1a6617b 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -32,7 +32,6 @@
#include <mach/iomap.h>
#include <mach/sdhci.h>
-#include <mach/gpio.h>
#include "board.h"
#include "clock.h"
@@ -46,7 +45,8 @@
.membase = IO_ADDRESS(TEGRA_UARTA_BASE),
.mapbase = TEGRA_UARTA_BASE,
.irq = INT_UARTA,
- .flags = UPF_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+ .type = PORT_TEGRA,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 216000000,
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index d5e3f89..690b888 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -61,7 +61,7 @@
{ NULL, NULL, 0, 0},
};
-void __init tegra_init_cache(void)
+static void __init tegra_init_cache(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index 0e0fd4d..bb5ce39 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -56,12 +56,12 @@
static DEFINE_MUTEX(tegra_cpu_lock);
static bool is_suspended;
-int tegra_verify_speed(struct cpufreq_policy *policy)
+static int tegra_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, freq_table);
}
-unsigned int tegra_getspeed(unsigned int cpu)
+static unsigned int tegra_getspeed(unsigned int cpu)
{
unsigned long rate;
@@ -129,7 +129,7 @@
unsigned int target_freq,
unsigned int relation)
{
- int idx;
+ unsigned int idx;
unsigned int freq;
int ret = 0;
diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c
index 57e35d2..7a2a02d 100644
--- a/arch/arm/mach-tegra/devices.c
+++ b/arch/arm/mach-tegra/devices.c
@@ -29,7 +29,93 @@
#include <mach/iomap.h>
#include <mach/dma.h>
#include <mach/usb_phy.h>
+
#include "gpio-names.h"
+#include "devices.h"
+
+static struct resource gpio_resource[] = {
+ [0] = {
+ .start = TEGRA_GPIO_BASE,
+ .end = TEGRA_GPIO_BASE + TEGRA_GPIO_SIZE-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_GPIO1,
+ .end = INT_GPIO1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = INT_GPIO2,
+ .end = INT_GPIO2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = INT_GPIO3,
+ .end = INT_GPIO3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [4] = {
+ .start = INT_GPIO4,
+ .end = INT_GPIO4,
+ .flags = IORESOURCE_IRQ,
+ },
+ [5] = {
+ .start = INT_GPIO5,
+ .end = INT_GPIO5,
+ .flags = IORESOURCE_IRQ,
+ },
+ [6] = {
+ .start = INT_GPIO6,
+ .end = INT_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+ [7] = {
+ .start = INT_GPIO7,
+ .end = INT_GPIO7,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device tegra_gpio_device = {
+ .name = "tegra-gpio",
+ .id = -1,
+ .resource = gpio_resource,
+ .num_resources = ARRAY_SIZE(gpio_resource),
+};
+
+static struct resource pinmux_resource[] = {
+ [0] = {
+ /* Tri-state registers */
+ .start = TEGRA_APB_MISC_BASE + 0x14,
+ .end = TEGRA_APB_MISC_BASE + 0x20 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* Mux registers */
+ .start = TEGRA_APB_MISC_BASE + 0x80,
+ .end = TEGRA_APB_MISC_BASE + 0x9c + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ /* Pull-up/down registers */
+ .start = TEGRA_APB_MISC_BASE + 0xa0,
+ .end = TEGRA_APB_MISC_BASE + 0xb0 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ /* Pad control registers */
+ .start = TEGRA_APB_MISC_BASE + 0x868,
+ .end = TEGRA_APB_MISC_BASE + 0x90c + 3,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device tegra_pinmux_device = {
+ .name = "tegra-pinmux",
+ .id = -1,
+ .resource = pinmux_resource,
+ .num_resources = ARRAY_SIZE(pinmux_resource),
+};
static struct resource i2c_resource1[] = {
[0] = {
diff --git a/arch/arm/mach-tegra/devices.h b/arch/arm/mach-tegra/devices.h
index 4a7dc0a..873ecb2 100644
--- a/arch/arm/mach-tegra/devices.h
+++ b/arch/arm/mach-tegra/devices.h
@@ -21,6 +21,8 @@
#include <linux/platform_device.h>
+extern struct platform_device tegra_gpio_device;
+extern struct platform_device tegra_pinmux_device;
extern struct platform_device tegra_sdhci_device1;
extern struct platform_device tegra_sdhci_device2;
extern struct platform_device tegra_sdhci_device3;
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index f4ef5eb..c0cf967 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -105,13 +105,17 @@
#define NV_DMA_MAX_TRASFER_SIZE 0x10000
-const unsigned int ahb_addr_wrap_table[8] = {
+static const unsigned int ahb_addr_wrap_table[8] = {
0, 32, 64, 128, 256, 512, 1024, 2048
};
-const unsigned int apb_addr_wrap_table[8] = {0, 1, 2, 4, 8, 16, 32, 64};
+static const unsigned int apb_addr_wrap_table[8] = {
+ 0, 1, 2, 4, 8, 16, 32, 64
+};
-const unsigned int bus_width_table[5] = {8, 16, 32, 64, 128};
+static const unsigned int bus_width_table[5] = {
+ 8, 16, 32, 64, 128
+};
#define TEGRA_DMA_NAME_SIZE 16
struct tegra_dma_channel {
@@ -157,7 +161,7 @@
return;
}
-void tegra_dma_stop(struct tegra_dma_channel *ch)
+static void tegra_dma_stop(struct tegra_dma_channel *ch)
{
u32 csr;
u32 status;
@@ -174,7 +178,7 @@
writel(status, ch->addr + APB_DMA_CHAN_STA);
}
-int tegra_dma_cancel(struct tegra_dma_channel *ch)
+static int tegra_dma_cancel(struct tegra_dma_channel *ch)
{
u32 csr;
unsigned long irq_flags;
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
index 4cea223..35a011f 100644
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -33,20 +33,26 @@
*
*/
+#ifdef __ASSEMBLY__
+#define IOMEM(x) (x)
+#else
+#define IOMEM(x) ((void __force __iomem *)(x))
+#endif
+
#define IO_IRAM_PHYS 0x40000000
-#define IO_IRAM_VIRT 0xFE400000
+#define IO_IRAM_VIRT IOMEM(0xFE400000)
#define IO_IRAM_SIZE SZ_256K
#define IO_CPU_PHYS 0x50040000
-#define IO_CPU_VIRT 0xFE000000
+#define IO_CPU_VIRT IOMEM(0xFE000000)
#define IO_CPU_SIZE SZ_16K
#define IO_PPSB_PHYS 0x60000000
-#define IO_PPSB_VIRT 0xFE200000
+#define IO_PPSB_VIRT IOMEM(0xFE200000)
#define IO_PPSB_SIZE SZ_1M
#define IO_APB_PHYS 0x70000000
-#define IO_APB_VIRT 0xFE300000
+#define IO_APB_VIRT IOMEM(0xFE300000)
#define IO_APB_SIZE SZ_1M
#define IO_TO_VIRT_BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
@@ -61,7 +67,7 @@
IO_TO_VIRT_XLATE((n), IO_CPU_PHYS, IO_CPU_VIRT) : \
IO_TO_VIRT_BETWEEN((n), IO_IRAM_PHYS, IO_IRAM_SIZE) ? \
IO_TO_VIRT_XLATE((n), IO_IRAM_PHYS, IO_IRAM_VIRT) : \
- 0)
+ NULL)
#ifndef __ASSEMBLER__
@@ -71,7 +77,7 @@
void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
void tegra_iounmap(volatile void __iomem *addr);
-#define IO_ADDRESS(n) ((void __iomem *) IO_TO_VIRT(n))
+#define IO_ADDRESS(n) (IO_TO_VIRT(n))
#ifdef CONFIG_TEGRA_PCI
extern void __iomem *tegra_pcie_io_base;
diff --git a/arch/arm/mach-tegra/include/mach/pinmux.h b/arch/arm/mach-tegra/include/mach/pinmux.h
index defd877..bb7dfdb 100644
--- a/arch/arm/mach-tegra/include/mach/pinmux.h
+++ b/arch/arm/mach-tegra/include/mach/pinmux.h
@@ -199,6 +199,7 @@
struct tegra_drive_pingroup_desc {
const char *name;
+ s16 reg_bank;
s16 reg;
};
@@ -207,6 +208,9 @@
int funcs[4];
int func_safe;
int vddio;
+ s16 tri_bank; /* Register bank the tri_reg exists within */
+ s16 mux_bank; /* Register bank the mux_reg exists within */
+ s16 pupd_bank; /* Register bank the pupd_reg exists within */
s16 tri_reg; /* offset into the TRISTATE_REG_* register bank */
s16 mux_reg; /* offset into the PIN_MUX_CTL_* register bank */
s16 pupd_reg; /* offset into the PULL_UPDOWN_REG_* register bank */
diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h
index 401d1b7..39c396d 100644
--- a/arch/arm/mach-tegra/include/mach/powergate.h
+++ b/arch/arm/mach-tegra/include/mach/powergate.h
@@ -31,7 +31,6 @@
int tegra_powergate_power_on(int id);
int tegra_powergate_power_off(int id);
-bool tegra_powergate_is_powered(int id);
int tegra_powergate_remove_clamping(int id);
/* Must be called with clk disabled, and returns with clk enabled */
diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c
index ea50fe2..5489f8b 100644
--- a/arch/arm/mach-tegra/io.c
+++ b/arch/arm/mach-tegra/io.c
@@ -31,25 +31,25 @@
static struct map_desc tegra_io_desc[] __initdata = {
{
- .virtual = IO_PPSB_VIRT,
+ .virtual = (unsigned long)IO_PPSB_VIRT,
.pfn = __phys_to_pfn(IO_PPSB_PHYS),
.length = IO_PPSB_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_APB_VIRT,
+ .virtual = (unsigned long)IO_APB_VIRT,
.pfn = __phys_to_pfn(IO_APB_PHYS),
.length = IO_APB_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_CPU_VIRT,
+ .virtual = (unsigned long)IO_CPU_VIRT,
.pfn = __phys_to_pfn(IO_CPU_PHYS),
.length = IO_CPU_SIZE,
.type = MT_DEVICE,
},
{
- .virtual = IO_IRAM_VIRT,
+ .virtual = (unsigned long)IO_IRAM_VIRT,
.pfn = __phys_to_pfn(IO_IRAM_PHYS),
.length = IO_IRAM_SIZE,
.type = MT_DEVICE,
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index f1f699d..f5aa173 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -41,6 +41,8 @@
#include <mach/clk.h>
#include <mach/powergate.h>
+#include "board.h"
+
/* register definitions */
#define AFI_OFFSET 0x3800
#define PADS_OFFSET 0x3000
@@ -150,9 +152,9 @@
static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
#define pmc_writel(value, reg) \
- __raw_writel(value, (u32)reg_pmc_base + (reg))
+ __raw_writel(value, reg_pmc_base + (reg))
#define pmc_readl(reg) \
- __raw_readl((u32)reg_pmc_base + (reg))
+ __raw_readl(reg_pmc_base + (reg))
/*
* Tegra2 defines 1GB in the AXI address map for PCIe.
@@ -460,7 +462,7 @@
struct tegra_pcie_port *pp;
if (nr >= tegra_pcie.num_ports)
- return 0;
+ return NULL;
pp = tegra_pcie.port + nr;
pp->root_bus_nr = sys->busnr;
diff --git a/arch/arm/mach-tegra/pinmux-t2-tables.c b/arch/arm/mach-tegra/pinmux-t2-tables.c
index a475367..a0dc2bc 100644
--- a/arch/arm/mach-tegra/pinmux-t2-tables.c
+++ b/arch/arm/mach-tegra/pinmux-t2-tables.c
@@ -31,10 +31,16 @@
#include <mach/pinmux.h>
#include <mach/suspend.h>
+#define TRISTATE_REG_A 0x14
+#define PIN_MUX_CTL_REG_A 0x80
+#define PULLUPDOWN_REG_A 0xa0
+#define PINGROUP_REG_A 0x868
+
#define DRIVE_PINGROUP(pg_name, r) \
[TEGRA_DRIVE_PINGROUP_ ## pg_name] = { \
.name = #pg_name, \
- .reg = r \
+ .reg_bank = 3, \
+ .reg = ((r) - PINGROUP_REG_A) \
}
const struct tegra_drive_pingroup_desc tegra_soc_drive_pingroups[TEGRA_MAX_DRIVE_PINGROUP] = {
@@ -90,11 +96,14 @@
TEGRA_MUX_ ## f3, \
}, \
.func_safe = TEGRA_MUX_ ## f_safe, \
- .tri_reg = tri_r, \
+ .tri_bank = 0, \
+ .tri_reg = ((tri_r) - TRISTATE_REG_A), \
.tri_bit = tri_b, \
- .mux_reg = mux_r, \
+ .mux_bank = 1, \
+ .mux_reg = ((mux_r) - PIN_MUX_CTL_REG_A), \
.mux_bit = mux_b, \
- .pupd_reg = pupd_r, \
+ .pupd_bank = 2, \
+ .pupd_reg = ((pupd_r) - PULLUPDOWN_REG_A), \
.pupd_bit = pupd_b, \
}
@@ -217,62 +226,3 @@
PINGROUP(XM2C, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 30),
PINGROUP(XM2D, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, -1, -1, -1, -1, 0xA8, 28),
};
-
-#ifdef CONFIG_PM
-#define TRISTATE_REG_A 0x14
-#define TRISTATE_REG_NUM 4
-#define PIN_MUX_CTL_REG_A 0x80
-#define PIN_MUX_CTL_REG_NUM 8
-#define PULLUPDOWN_REG_A 0xa0
-#define PULLUPDOWN_REG_NUM 5
-
-static u32 pinmux_reg[TRISTATE_REG_NUM + PIN_MUX_CTL_REG_NUM +
- PULLUPDOWN_REG_NUM +
- ARRAY_SIZE(tegra_soc_drive_pingroups)];
-
-static inline unsigned long pg_readl(unsigned long offset)
-{
- return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
-}
-
-static inline void pg_writel(unsigned long value, unsigned long offset)
-{
- writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
-}
-
-void tegra_pinmux_suspend(void)
-{
- unsigned int i;
- u32 *ctx = pinmux_reg;
-
- for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
- *ctx++ = pg_readl(PIN_MUX_CTL_REG_A + i*4);
-
- for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
- *ctx++ = pg_readl(PULLUPDOWN_REG_A + i*4);
-
- for (i = 0; i < TRISTATE_REG_NUM; i++)
- *ctx++ = pg_readl(TRISTATE_REG_A + i*4);
-
- for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++)
- *ctx++ = pg_readl(tegra_soc_drive_pingroups[i].reg);
-}
-
-void tegra_pinmux_resume(void)
-{
- unsigned int i;
- u32 *ctx = pinmux_reg;
-
- for (i = 0; i < PIN_MUX_CTL_REG_NUM; i++)
- pg_writel(*ctx++, PIN_MUX_CTL_REG_A + i*4);
-
- for (i = 0; i < PULLUPDOWN_REG_NUM; i++)
- pg_writel(*ctx++, PULLUPDOWN_REG_A + i*4);
-
- for (i = 0; i < TRISTATE_REG_NUM; i++)
- pg_writel(*ctx++, TRISTATE_REG_A + i*4);
-
- for (i = 0; i < ARRAY_SIZE(tegra_soc_drive_pingroups); i++)
- pg_writel(*ctx++, tegra_soc_drive_pingroups[i].reg);
-}
-#endif
diff --git a/arch/arm/mach-tegra/pinmux.c b/arch/arm/mach-tegra/pinmux.c
index f80d507..1d20165 100644
--- a/arch/arm/mach-tegra/pinmux.c
+++ b/arch/arm/mach-tegra/pinmux.c
@@ -20,6 +20,7 @@
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <mach/iomap.h>
#include <mach/pinmux.h>
@@ -169,15 +170,17 @@
}
}
+static int nbanks;
+static void __iomem **regs;
-static inline unsigned long pg_readl(unsigned long offset)
+static inline u32 pg_readl(u32 bank, u32 reg)
{
- return readl(IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+ return readl(regs[bank] + reg);
}
-static inline void pg_writel(unsigned long value, unsigned long offset)
+static inline void pg_writel(u32 val, u32 bank, u32 reg)
{
- writel(value, IO_TO_VIRT(TEGRA_APB_MISC_BASE + offset));
+ writel(val, regs[bank] + reg);
}
static int tegra_pinmux_set_func(const struct tegra_pingroup_config *config)
@@ -217,10 +220,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(pingroups[pg].mux_reg);
+ reg = pg_readl(pingroups[pg].mux_bank, pingroups[pg].mux_reg);
reg &= ~(0x3 << pingroups[pg].mux_bit);
reg |= mux << pingroups[pg].mux_bit;
- pg_writel(reg, pingroups[pg].mux_reg);
+ pg_writel(reg, pingroups[pg].mux_bank, pingroups[pg].mux_reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -241,11 +244,11 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(pingroups[pg].tri_reg);
+ reg = pg_readl(pingroups[pg].tri_bank, pingroups[pg].tri_reg);
reg &= ~(0x1 << pingroups[pg].tri_bit);
if (tristate)
reg |= 1 << pingroups[pg].tri_bit;
- pg_writel(reg, pingroups[pg].tri_reg);
+ pg_writel(reg, pingroups[pg].tri_bank, pingroups[pg].tri_reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -272,10 +275,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(pingroups[pg].pupd_reg);
+ reg = pg_readl(pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
reg &= ~(0x3 << pingroups[pg].pupd_bit);
reg |= pupd << pingroups[pg].pupd_bit;
- pg_writel(reg, pingroups[pg].pupd_reg);
+ pg_writel(reg, pingroups[pg].pupd_bank, pingroups[pg].pupd_reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -362,12 +365,12 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
if (hsm == TEGRA_HSM_ENABLE)
reg |= (1 << 2);
else
reg &= ~(1 << 2);
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -387,12 +390,12 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
if (schmitt == TEGRA_SCHMITT_ENABLE)
reg |= (1 << 3);
else
reg &= ~(1 << 3);
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -412,10 +415,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x3 << 4);
reg |= drive << 4;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -435,10 +438,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x1f << 12);
reg |= pull_down << 12;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -458,10 +461,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x1f << 12);
reg |= pull_up << 12;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -481,10 +484,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x3 << 28);
reg |= slew_rising << 28;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -504,10 +507,10 @@
spin_lock_irqsave(&mux_lock, flags);
- reg = pg_readl(drive_pingroups[pg].reg);
+ reg = pg_readl(drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
reg &= ~(0x3 << 30);
reg |= slew_falling << 30;
- pg_writel(reg, drive_pingroups[pg].reg);
+ pg_writel(reg, drive_pingroups[pg].reg_bank, drive_pingroups[pg].reg);
spin_unlock_irqrestore(&mux_lock, flags);
@@ -665,6 +668,99 @@
}
}
+static int __devinit tegra_pinmux_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int i;
+ int config_bad = 0;
+
+ for (i = 0; ; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res)
+ break;
+ }
+ nbanks = i;
+
+ for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+ if (pingroups[i].tri_bank >= nbanks) {
+ dev_err(&pdev->dev, "pingroup %d: bad tri_bank\n", i);
+ config_bad = 1;
+ }
+
+ if (pingroups[i].mux_bank >= nbanks) {
+ dev_err(&pdev->dev, "pingroup %d: bad mux_bank\n", i);
+ config_bad = 1;
+ }
+
+ if (pingroups[i].pupd_bank >= nbanks) {
+ dev_err(&pdev->dev, "pingroup %d: bad pupd_bank\n", i);
+ config_bad = 1;
+ }
+ }
+
+ for (i = 0; i < TEGRA_MAX_DRIVE_PINGROUP; i++) {
+ if (drive_pingroups[i].reg_bank >= nbanks) {
+ dev_err(&pdev->dev,
+ "drive pingroup %d: bad reg_bank\n", i);
+ config_bad = 1;
+ }
+ }
+
+ if (config_bad)
+ return -ENODEV;
+
+ regs = devm_kzalloc(&pdev->dev, nbanks * sizeof(*regs), GFP_KERNEL);
+ if (!regs) {
+ dev_err(&pdev->dev, "Can't alloc regs pointer\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < nbanks; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing MEM resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res),
+ dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev,
+ "Couldn't request MEM resource %d\n", i);
+ return -ENODEV;
+ }
+
+ regs[i] = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!regs) {
+ dev_err(&pdev->dev, "Couldn't ioremap regs %d\n", i);
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+static struct of_device_id tegra_pinmux_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-pinmux", },
+ { },
+};
+
+static struct platform_driver tegra_pinmux_driver = {
+ .driver = {
+ .name = "tegra-pinmux",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_pinmux_of_match,
+ },
+ .probe = tegra_pinmux_probe,
+};
+
+static int __init tegra_pinmux_init(void)
+{
+ return platform_driver_register(&tegra_pinmux_driver);
+}
+postcore_initcall(tegra_pinmux_init);
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
@@ -684,6 +780,7 @@
int len;
for (i = 0; i < TEGRA_MAX_PINGROUP; i++) {
+ unsigned long reg;
unsigned long tri;
unsigned long mux;
unsigned long pupd;
@@ -696,8 +793,9 @@
seq_printf(s, "TEGRA_MUX_NONE");
len = strlen("NONE");
} else {
- mux = (pg_readl(pingroups[i].mux_reg) >>
- pingroups[i].mux_bit) & 0x3;
+ reg = pg_readl(pingroups[i].mux_bank,
+ pingroups[i].mux_reg);
+ mux = (reg >> pingroups[i].mux_bit) & 0x3;
if (pingroups[i].funcs[mux] == TEGRA_MUX_RSVD) {
seq_printf(s, "TEGRA_MUX_RSVD%1lu", mux+1);
len = 5;
@@ -713,8 +811,9 @@
seq_printf(s, "TEGRA_PUPD_NORMAL");
len = strlen("NORMAL");
} else {
- pupd = (pg_readl(pingroups[i].pupd_reg) >>
- pingroups[i].pupd_bit) & 0x3;
+ reg = pg_readl(pingroups[i].pupd_bank,
+ pingroups[i].pupd_reg);
+ pupd = (reg >> pingroups[i].pupd_bit) & 0x3;
seq_printf(s, "TEGRA_PUPD_%s", pupd_name(pupd));
len = strlen(pupd_name(pupd));
}
@@ -723,8 +822,9 @@
if (pingroups[i].tri_reg < 0) {
seq_printf(s, "TEGRA_TRI_NORMAL");
} else {
- tri = (pg_readl(pingroups[i].tri_reg) >>
- pingroups[i].tri_bit) & 0x1;
+ reg = pg_readl(pingroups[i].tri_bank,
+ pingroups[i].tri_reg);
+ tri = (reg >> pingroups[i].tri_bit) & 0x1;
seq_printf(s, "TEGRA_TRI_%s", tri_name(tri));
}
@@ -759,7 +859,8 @@
dbg_pad_field(s, 7 - len);
- reg = pg_readl(drive_pingroups[i].reg);
+ reg = pg_readl(drive_pingroups[i].reg_bank,
+ drive_pingroups[i].reg);
if (HSM_EN(reg)) {
seq_printf(s, "TEGRA_HSM_ENABLE");
len = 16;
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 3cee9aa..9483064 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -89,12 +89,11 @@
return tegra_powergate_set(id, false);
}
-bool tegra_powergate_is_powered(int id)
+static bool tegra_powergate_is_powered(int id)
{
u32 status;
- if (id < 0 || id >= TEGRA_NUM_POWERGATE)
- return -EINVAL;
+ WARN_ON(id < 0 || id >= TEGRA_NUM_POWERGATE);
status = pmc_read(PWRGATE_STATUS) & (1 << id);
return !!status;
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 0fe9b3e..371869d 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -166,13 +166,13 @@
static int tegra_periph_clk_enable_refcount[3 * 32];
#define clk_writel(value, reg) \
- __raw_writel(value, (u32)reg_clk_base + (reg))
+ __raw_writel(value, reg_clk_base + (reg))
#define clk_readl(reg) \
- __raw_readl((u32)reg_clk_base + (reg))
+ __raw_readl(reg_clk_base + (reg))
#define pmc_writel(value, reg) \
- __raw_writel(value, (u32)reg_pmc_base + (reg))
+ __raw_writel(value, reg_pmc_base + (reg))
#define pmc_readl(reg) \
- __raw_readl((u32)reg_pmc_base + (reg))
+ __raw_readl(reg_pmc_base + (reg))
unsigned long clk_measure_input_freq(void)
{
@@ -918,7 +918,7 @@
static void tegra2_periph_clk_init(struct clk *c)
{
u32 val = clk_readl(c->reg);
- const struct clk_mux_sel *mux = 0;
+ const struct clk_mux_sel *mux = NULL;
const struct clk_mux_sel *sel;
if (c->flags & MUX) {
for (sel = c->inputs; sel->input != NULL; sel++) {
@@ -1459,7 +1459,7 @@
static struct clk_mux_sel tegra_clk_m_sel[] = {
{ .input = &tegra_clk_32k, .value = 0},
{ .input = &tegra_pll_s, .value = 1},
- { 0, 0},
+ { NULL , 0},
};
static struct clk tegra_clk_m = {
@@ -1861,7 +1861,7 @@
{ .name = "ext_audio_clk1", .value = 6 },
{ .name = "ext_vimclk", .value = 7 },
#endif
- { 0, 0 }
+ { NULL, 0 }
};
static struct clk tegra_clk_audio = {
@@ -1885,7 +1885,7 @@
},
};
-struct clk_lookup tegra_audio_clk_lookups[] = {
+static struct clk_lookup tegra_audio_clk_lookups[] = {
{ .con_id = "audio", .clk = &tegra_clk_audio },
{ .con_id = "audio_2x", .clk = &tegra_clk_audio_2x }
};
@@ -1926,7 +1926,7 @@
{ .input = &tegra_pll_p_out3, .value = 6},
{ .input = &tegra_clk_d, .value = 7},
{ .input = &tegra_pll_x, .value = 8},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_sclk[] = {
@@ -1938,7 +1938,7 @@
{ .input = &tegra_clk_d, .value = 5},
{ .input = &tegra_clk_32k, .value = 6},
{ .input = &tegra_pll_m_out1, .value = 7},
- { 0, 0},
+ { NULL, 0},
};
static struct clk tegra_clk_cclk = {
@@ -2009,7 +2009,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_p, .value = 2},
{ .input = &tegra_pll_a_out0, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllm_pllc_pllp_clkm[] = {
@@ -2017,7 +2017,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_p, .value = 2},
{ .input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
@@ -2025,7 +2025,7 @@
{ .input = &tegra_pll_c, .value = 1},
{ .input = &tegra_pll_m, .value = 2},
{ .input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllaout0_audio2x_pllp_clkm[] = {
@@ -2033,7 +2033,7 @@
{.input = &tegra_clk_audio_2x, .value = 1},
{.input = &tegra_pll_p, .value = 2},
{.input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
@@ -2041,7 +2041,7 @@
{.input = &tegra_pll_d_out0, .value = 1},
{.input = &tegra_pll_c, .value = 2},
{.input = &tegra_clk_m, .value = 3},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_audio_clkm_clk32[] = {
@@ -2050,39 +2050,39 @@
{.input = &tegra_clk_audio, .value = 2},
{.input = &tegra_clk_m, .value = 3},
{.input = &tegra_clk_32k, .value = 4},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
{.input = &tegra_pll_p, .value = 0},
{.input = &tegra_pll_c, .value = 1},
{.input = &tegra_pll_m, .value = 2},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_clk_m[] = {
{ .input = &tegra_clk_m, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pllp_out3[] = {
{ .input = &tegra_pll_p_out3, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_plld[] = {
{ .input = &tegra_pll_d, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_clk_32k[] = {
{ .input = &tegra_clk_32k, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk_mux_sel mux_pclk[] = {
{ .input = &tegra_clk_pclk, .value = 0},
- { 0, 0},
+ { NULL, 0},
};
static struct clk tegra_clk_emc = {
@@ -2125,7 +2125,7 @@
.parent = _parent, \
}
-struct clk tegra_list_clks[] = {
+static struct clk tegra_list_clks[] = {
PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 108000000, mux_pclk, 0),
PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET),
PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
@@ -2221,7 +2221,7 @@
* configuration. List those here to register them twice in the clock lookup
* table under two names.
*/
-struct clk_duplicate tegra_clk_duplicates[] = {
+static struct clk_duplicate tegra_clk_duplicates[] = {
CLK_DUPLICATE("uarta", "tegra_uart.0", NULL),
CLK_DUPLICATE("uartb", "tegra_uart.1", NULL),
CLK_DUPLICATE("uartc", "tegra_uart.2", NULL),
@@ -2252,7 +2252,7 @@
.clk = ck, \
}
-struct clk *tegra_ptr_clks[] = {
+static struct clk *tegra_ptr_clks[] = {
&tegra_clk_32k,
&tegra_pll_s,
&tegra_clk_m,
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 9035042..e2272d2 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -62,9 +62,9 @@
static u64 persistent_ms, last_persistent_ms;
#define timer_writel(value, reg) \
- __raw_writel(value, (u32)timer_reg_base + (reg))
+ __raw_writel(value, timer_reg_base + (reg))
#define timer_readl(reg) \
- __raw_readl((u32)timer_reg_base + (reg))
+ __raw_readl(timer_reg_base + (reg))
static int tegra_timer_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
@@ -133,7 +133,7 @@
* tegra_rtc driver could be executing to avoid race conditions
* on the RTC shadow register
*/
-u64 tegra_rtc_read_ms(void)
+static u64 tegra_rtc_read_ms(void)
{
u32 ms = readl(rtc_base + RTC_MILLISECONDS);
u32 s = readl(rtc_base + RTC_SHADOW_SECONDS);
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index d6e5d30..1cbcd4f 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -51,39 +51,12 @@
endchoice
-choice
- prompt "Memory configuration"
- default MACH_U300_SINGLE_RAM
- ---help---
- You have to config the kernel according to the physical memory
- configuration.
-
-config MACH_U300_SINGLE_RAM
- bool "Single RAM"
- help
- Select this if you want support for Single RAM phones.
-
-config MACH_U300_DUAL_RAM
- bool "Dual RAM"
- help
- Select this if you want support for Dual RAM phones.
- This is two RAM memories on different EMIFs.
-endchoice
-
config U300_DEBUG
bool "Debug support for U300"
depends on PM
help
Debug support for U300 in sysfs, procfs etc.
-config MACH_U300_SEMI_IS_SHARED
- bool "The SEMI is used by both the access and application side"
- depends on MACH_U300
- help
- This makes it possible to use the SEMI (Shared External
- Memory Interface) from both from access and application
- side.
-
config MACH_U300_SPIDUMMY
bool "SSP/SPI dummy chip"
select SPI
@@ -96,25 +69,6 @@
you don't need it. Selecting this will activate the
SPI framework and ARM PL022 support.
-comment "All the settings below must match the bootloader's settings"
-
-config MACH_U300_ACCESS_MEM_SIZE
- int "Access CPU memory allocation"
- range 7 25
- depends on MACH_U300_SINGLE_RAM
- default 13
- help
- How much memory in MiB that the Access side CPU has allocated
-
-config MACH_U300_2MB_ALIGNMENT_FIX
- bool "2MiB alignment fix"
- depends on MACH_U300_SINGLE_RAM
- default y
- help
- If yes and the Access side CPU has allocated an odd size in
- MiB, this fix gives you one MiB extra that would otherwise be
- lost due to Linux 2 MiB alignment policy.
-
endmenu
endif
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
index 69357af..87811de 100644
--- a/arch/arm/mach-u300/Makefile.boot
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -1,15 +1,4 @@
-# Note: the following conditions must always be true:
-# ZRELADDR == virt_to_phys(TEXTADDR)
-# PARAMS_PHYS must be within 4MB of ZRELADDR
-# INITRD_PHYS must be in RAM
-
-ifdef CONFIG_MACH_U300_SINGLE_RAM
- zreladdr-y += 0x28E08000
- params_phys-y := 0x28E00100
-else
- zreladdr-y += 0x48008000
- params_phys-y := 0x48000100
-endif
-
+ zreladdr-y += 0x48008000
+params_phys-y := 0x48000100
# This isn't used.
-#initrd_phys-y := 0x29800000
+#initrd_phys-y := 0x48800000
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index f4ad6d2..ac0791e 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -72,25 +72,6 @@
.length = SZ_32K,
.type = MT_DEVICE,
},
- {
- .virtual = 0xffff2000, /* TCM memory */
- .pfn = __phys_to_pfn(0xffff2000),
- .length = SZ_16K,
- .type = MT_DEVICE,
- },
-
- /*
- * This overlaps with the IRQ vectors etc at 0xffff0000, so these
- * may have to be moved to 0x00000000 in order to use the ROM.
- */
- /*
- {
- .virtual = U300_BOOTROM_VIRT_BASE,
- .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
- .length = SZ_64K,
- .type = MT_ROM,
- },
- */
};
void __init u300_map_io(void)
@@ -367,51 +348,6 @@
}
};
-/* TODO: These should be protected by suitable #ifdef's */
-static struct resource ave_resources[] = {
- {
- .name = "AVE3e I/O Area",
- .start = U300_VIDEOENC_BASE,
- .end = U300_VIDEOENC_BASE + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e IRQ0",
- .start = IRQ_U300_VIDEO_ENC_0,
- .end = IRQ_U300_VIDEO_ENC_0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e IRQ1",
- .start = IRQ_U300_VIDEO_ENC_1,
- .end = IRQ_U300_VIDEO_ENC_1,
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "AVE3e Physmem Area",
- .start = 0, /* 0 will be remapped to reserved memory */
- .end = SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- /*
- * The AVE3e requires two regions of 256MB that it considers
- * "invisible". The hardware will not be able to access these
- * addresses, so they should never point to system RAM.
- */
- {
- .name = "AVE3e Reserved 0",
- .start = 0xd0000000,
- .end = 0xd0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "AVE3e Reserved 1",
- .start = 0xe0000000,
- .end = 0xe0000000 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
static struct resource dma_resource[] = {
{
.start = U300_DMAC_BASE,
@@ -1650,13 +1586,6 @@
},
};
-static struct platform_device ave_device = {
- .name = "video_enc",
- .id = -1,
- .num_resources = ARRAY_SIZE(ave_resources),
- .resource = ave_resources,
-};
-
static struct platform_device dma_device = {
.name = "coh901318",
.id = -1,
@@ -1747,7 +1676,6 @@
&gpio_device,
&nand_device,
&wdog_device,
- &ave_device,
&pinmux_device,
};
@@ -1945,17 +1873,10 @@
/* Register subdevices on the SPI bus */
u300_spi_register_board_devices();
-#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
- /*
- * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
- * both subsystems are requesting this mode.
- * If we not share the Acc SDRAM, this is never the case. Therefore
- * enable it here from the App side.
- */
+ /* Enable SEMI self refresh */
val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
-#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
}
static int core_module_init(void)
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index f0394ba..5140dee 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -256,57 +256,8 @@
};
#endif
-#ifdef CONFIG_AB3550_CORE
-static struct abx500_init_settings ab3550_init_settings[] = {
- {
- .bank = 0,
- .reg = AB3550_IMR1,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR2,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR3,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR4,
- .setting = 0xff
- },
- {
- .bank = 0,
- .reg = AB3550_IMR5,
- /* The two most significant bits are not used */
- .setting = 0x3f
- },
-};
-
-static struct ab3550_platform_data ab3550_plf_data = {
- .irq = {
- .base = IRQ_AB3550_BASE,
- .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
- },
- .dev_data = {
- },
- .init_settings = ab3550_init_settings,
- .init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
-};
-#endif
-
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
-#if defined(CONFIG_AB3550_CORE)
- {
- .type = "ab3550",
- .addr = 0x4A,
- .irq = IRQ_U300_IRQ0_EXT,
- .platform_data = &ab3550_plf_data,
- },
-#elif defined(CONFIG_AB3100_CORE)
+#ifdef CONFIG_AB3100_CORE
{
.type = "ab3100",
.addr = 0x48,
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index d270fea..db3fbfa 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -117,14 +117,6 @@
#define IRQ_U300_GPIO_END (U300_VIC_IRQS_END)
#endif
-/* Optional AB3550 mixsig chip */
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE (IRQ_U300_GPIO_END)
-#define IRQ_AB3550_END (IRQ_AB3550_BASE + 38)
-#else
-#define IRQ_AB3550_END (IRQ_U300_GPIO_END)
-#endif
-
-#define NR_IRQS (IRQ_AB3550_END)
+#define NR_IRQS (IRQ_U300_GPIO_END)
#endif
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 7034bae..c808f34 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -13,25 +13,7 @@
#ifndef __MACH_MEMORY_H
#define __MACH_MEMORY_H
-#ifdef CONFIG_MACH_U300_DUAL_RAM
-
-#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET 0x100
-
-#else
-
-#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#define BOOT_PARAMS_OFFSET (0x100 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2)
-#else
-#define PLAT_PHYS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
-#define BOOT_PARAMS_OFFSET 0x100
-#endif
-#endif
+#define PLAT_PHYS_OFFSET UL(0x48000000)
+#define BOOT_PARAMS_OFFSET 0x100
#endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 80e7305..89422ee 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -23,21 +23,6 @@
#include <asm/mach/arch.h>
#include <asm/memory.h>
-static void __init u300_reserve(void)
-{
- /*
- * U300 - This platform family can share physical memory
- * between two ARM cpus, one running Linux and the other
- * running another OS.
- */
-#ifdef CONFIG_MACH_U300_SINGLE_RAM
-#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \
- CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
- memblock_reserve(PHYS_OFFSET, 0x00100000);
-#endif
-#endif
-}
-
static void __init u300_init_machine(void)
{
u300_init_devices();
@@ -63,7 +48,6 @@
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
.atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
- .reserve = u300_reserve,
.init_irq = u300_init_irq,
.timer = &u300_timer,
.init_machine = u300_init_machine,
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 1694916..6bd2f45 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -3,7 +3,8 @@
#
obj-y := clock.o cpu.o devices.o devices-common.o \
- id.o usb.o
+ id.o usb.o timer.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 15b23e4..74bfcff 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -153,7 +153,7 @@
GPIO7_U1_RTSn | PIN_OUTPUT_HIGH,
};
-static pin_cfg_t mop500_pins_hrefv60[] = {
+static pin_cfg_t hrefv60_pins[] = {
/* WLAN */
GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */
GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */
@@ -279,14 +279,26 @@
void __init mop500_pins_init(void)
{
nmk_config_pins(mop500_pins_common,
- ARRAY_SIZE(mop500_pins_common));
- if (machine_is_hrefv60())
- nmk_config_pins(mop500_pins_hrefv60,
- ARRAY_SIZE(mop500_pins_hrefv60));
- else if (machine_is_snowball())
- nmk_config_pins(snowball_pins,
- ARRAY_SIZE(snowball_pins));
- else
- nmk_config_pins(mop500_pins_default,
- ARRAY_SIZE(mop500_pins_default));
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(mop500_pins_default,
+ ARRAY_SIZE(mop500_pins_default));
+}
+
+void __init snowball_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(snowball_pins,
+ ARRAY_SIZE(snowball_pins));
+}
+
+void __init hrefv60_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(hrefv60_pins,
+ ARRAY_SIZE(hrefv60_pins));
}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index d0cb9e5..6826fae 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -216,30 +216,48 @@
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */
- if (!machine_is_snowball())
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
- if (machine_is_hrefv60() || machine_is_snowball()) {
- if (machine_is_hrefv60()) {
- mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
- sdi0_en = HREFV60_SDMMC_EN_GPIO;
- sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
- } else if (machine_is_snowball()) {
- mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
- mop500_sdi0_data.cd_invert = true;
- sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
- sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
- }
- sdi0_configure();
- }
-
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
* mop500_sdi_tc35892_init() above.
*/
}
+
+void __init snowball_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+ mop500_sdi0_data.cd_invert = true;
+ sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+ sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
+
+void __init hrefv60_sdi_init(void)
+{
+ u32 periphid = 0x10480180;
+
+ mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+
+ db8500_add_sdi2(&mop500_sdi2_data, periphid);
+
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, periphid);
+
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index f67b83d..bdd7b80 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -604,28 +604,14 @@
{
int i2c0_devs;
- /*
- * The HREFv60 board removed a GPIO expander and routed
- * all these GPIO pins to the internal GPIO controller
- * instead.
- */
- if (!machine_is_snowball()) {
- if (machine_is_hrefv60())
- mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- else
- mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
- }
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
u8500_init_devices();
mop500_pins_init();
- if (machine_is_snowball())
- platform_add_devices(snowball_platform_devs,
- ARRAY_SIZE(snowball_platform_devs));
- else
- platform_add_devices(mop500_platform_devs,
- ARRAY_SIZE(mop500_platform_devs));
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
@@ -633,8 +619,66 @@
mop500_uart_init();
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
- if (machine_is_hrefv60())
- i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init snowball_init_machine(void)
+{
+ int i2c0_devs;
+
+ u8500_init_devices();
+
+ snowball_pins_init();
+
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+
+ mop500_i2c_init();
+ snowball_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init hrefv60_init_machine(void)
+{
+ int i2c0_devs;
+
+ /*
+ * The HREFv60 board removed a GPIO expander and routed
+ * all these GPIO pins to the internal GPIO controller
+ * instead.
+ */
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+
+ u8500_init_devices();
+
+ hrefv60_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_i2c_init();
+ mop500_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
@@ -659,7 +703,7 @@
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
- .init_machine = mop500_init_machine,
+ .init_machine = hrefv60_init_machine,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -668,5 +712,5 @@
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
- .init_machine = mop500_init_machine,
+ .init_machine = snowball_init_machine,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index ee77a89..de18a2a 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -40,10 +40,13 @@
struct i2c_board_info;
extern void mop500_sdi_init(void);
+extern void snowball_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pins_init(void);
+void __init hrefv60_pins_init(void);
+void __init snowball_pins_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index e014aa7..82025ba 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -10,6 +10,7 @@
#include <linux/amba/bus.h>
#include <linux/irq.h>
#include <linux/i2c.h>
+#include <linux/mfd/ab5500/ab5500.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
@@ -87,7 +88,6 @@
.brt_val = 0x7F, /* Max brightness */
};
-
static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
{
/* Backlight */
@@ -101,6 +101,30 @@
db5500_add_i2c2(&u5500_i2c2_data);
i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
}
+
+static struct ab5500_platform_data ab5500_plf_data = {
+ .irq = {
+ .base = 0,
+ .count = 0,
+ },
+ .init_settings = NULL,
+ .init_settings_sz = 0,
+ .pm_power_off = false,
+};
+
+static struct platform_device ab5500_device = {
+ .name = "ab5500-core",
+ .id = 0,
+ .dev = {
+ .platform_data = &ab5500_plf_data,
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device *u5500_platform_devices[] __initdata = {
+ &ab5500_device,
+};
+
static void __init u5500_uart_init(void)
{
db5500_add_uart0(NULL);
@@ -115,6 +139,9 @@
u5500_i2c_init();
u5500_sdi_init();
u5500_uart_init();
+
+ platform_add_devices(u5500_platform_devices,
+ ARRAY_SIZE(u5500_platform_devices));
}
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
new file mode 100644
index 0000000..122ddde
--- /dev/null
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/hardware.h>
+#include <mach/id.h>
+
+static void __iomem *l2x0_base;
+
+static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
+{
+ /* wait for the operation to complete */
+ while (readl_relaxed(reg) & mask)
+ cpu_relax();
+}
+
+static inline void ux500_cache_sync(void)
+{
+ writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC);
+ ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1);
+}
+
+/*
+ * The L2 cache cannot be turned off in the non-secure world.
+ * Dummy until a secure service is in place.
+ */
+static void ux500_l2x0_disable(void)
+{
+}
+
+/*
+ * This is only called when doing a kexec, just after turning off the L2
+ * and L1 cache, and it is surrounded by a spinlock in the generic version.
+ * However, we're not really turning off the L2 cache right now and the
+ * PL310 does not support exclusive accesses (used to implement the spinlock).
+ * So, the invalidation needs to be done without the spinlock.
+ */
+static void ux500_l2x0_inv_all(void)
+{
+ uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
+
+ /* invalidate all ways */
+ writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+ ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
+ ux500_cache_sync();
+}
+
+static int __init ux500_l2x0_unlock(void)
+{
+ int i;
+
+ /*
+ * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+ * apparently locks both caches before jumping to the kernel. The
+ * l2x0 core will not touch the unlock registers if the l2x0 is
+ * already enabled, so we do it right here instead. The PL310 has
+ * 8 sets of registers, one per possible CPU.
+ */
+ for (i = 0; i < 8; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+ return 0;
+}
+
+static int __init ux500_l2x0_init(void)
+{
+ if (cpu_is_u5500())
+ l2x0_base = __io_address(U5500_L2CC_BASE);
+ else if (cpu_is_u8500())
+ l2x0_base = __io_address(U8500_L2CC_BASE);
+ else
+ ux500_unknown_soc();
+
+ /* Unlock before init */
+ ux500_l2x0_unlock();
+
+ /* 64KB way size, 8 way associativity, force WA */
+ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+ /* Override invalidate function */
+ outer_cache.disable = ux500_l2x0_disable;
+ outer_cache.inv_all = ux500_l2x0_inv_all;
+
+ return 0;
+}
+
+early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 1da23bb..f418574 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -10,14 +10,12 @@
#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/db5500-prcmu.h>
+#include <linux/clksrc-dbx500-prcmu.h>
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/localtimer.h>
-#include <plat/mtu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
@@ -26,10 +24,6 @@
void __iomem *_PRCMU_BASE;
-#ifdef CONFIG_CACHE_L2X0
-static void __iomem *l2x0_base;
-#endif
-
void __init ux500_init_irq(void)
{
void __iomem *dist_base;
@@ -53,96 +47,6 @@
if (cpu_is_u5500())
db5500_prcmu_early_init();
if (cpu_is_u8500())
- prcmu_early_init();
+ db8500_prcmu_early_init();
clk_init();
}
-
-#ifdef CONFIG_CACHE_L2X0
-static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
-{
- /* wait for the operation to complete */
- while (readl_relaxed(reg) & mask)
- ;
-}
-
-static inline void ux500_cache_sync(void)
-{
- void __iomem *base = l2x0_base;
-
- writel_relaxed(0, base + L2X0_CACHE_SYNC);
- ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
-}
-
-/*
- * The L2 cache cannot be turned off in the non-secure world.
- * Dummy until a secure service is in place.
- */
-static void ux500_l2x0_disable(void)
-{
-}
-
-/*
- * This is only called when doing a kexec, just after turning off the L2
- * and L1 cache, and it is surrounded by a spinlock in the generic version.
- * However, we're not really turning off the L2 cache right now and the
- * PL310 does not support exclusive accesses (used to implement the spinlock).
- * So, the invalidation needs to be done without the spinlock.
- */
-static void ux500_l2x0_inv_all(void)
-{
- void __iomem *base = l2x0_base;
- uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */
-
- /* invalidate all ways */
- writel_relaxed(l2x0_way_mask, base + L2X0_INV_WAY);
- ux500_cache_wait(base + L2X0_INV_WAY, l2x0_way_mask);
- ux500_cache_sync();
-}
-
-static int ux500_l2x0_init(void)
-{
- if (cpu_is_u5500())
- l2x0_base = __io_address(U5500_L2CC_BASE);
- else if (cpu_is_u8500())
- l2x0_base = __io_address(U8500_L2CC_BASE);
- else
- ux500_unknown_soc();
-
- /* 64KB way size, 8 way associativity, force WA */
- l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
-
- /* Override invalidate function */
- outer_cache.disable = ux500_l2x0_disable;
- outer_cache.inv_all = ux500_l2x0_inv_all;
-
- return 0;
-}
-early_initcall(ux500_l2x0_init);
-#endif
-
-static void __init ux500_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
- /* Setup the local timer base */
- if (cpu_is_u5500())
- twd_base = __io_address(U5500_TWD_BASE);
- else if (cpu_is_u8500())
- twd_base = __io_address(U8500_TWD_BASE);
- else
- ux500_unknown_soc();
-#endif
- if (cpu_is_u5500())
- mtu_base = __io_address(U5500_MTU0_BASE);
- else if (cpu_is_u8500ed())
- mtu_base = __io_address(U8500_MTU0_BASE_ED);
- else if (cpu_is_u8500())
- mtu_base = __io_address(U8500_MTU0_BASE);
- else
- ux500_unknown_soc();
-
- nmdk_timer_init();
-}
-
-struct sys_timer ux500_timer = {
- .init = ux500_timer_init,
-};
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index dd8037e..572015e 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -24,7 +24,7 @@
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 6ad9832..994b5fe 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -61,6 +61,8 @@
#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000)
#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000)
#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000)
+#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
+#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 0499971..751b0e6 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -102,10 +102,13 @@
#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
+#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
+
/* per3 base addresses */
#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 7dd0807..6fb3c4b 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -51,15 +51,9 @@
static inline void arch_decomp_setup(void)
{
/* Check in run time if we run on an U8500 or U5500 */
- if (machine_is_u8500() ||
- machine_is_svp8500v1() ||
- machine_is_svp8500v2() ||
- machine_is_hrefv60() ||
- machine_is_snowball())
- ux500_uart_base = U8500_UART2_BASE;
- else if (machine_is_u5500())
+ if (machine_is_u5500())
ux500_uart_base = U5500_UART0_BASE;
- else /* not much can be done to help here */
+ else
ux500_uart_base = U8500_UART2_BASE;
}
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
index f923764..8b1d1a7 100644
--- a/arch/arm/mach-ux500/pins-db8500.h
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -35,40 +35,40 @@
#define GPIO4_GPIO PIN_CFG(4, GPIO)
#define GPIO4_U1_RXD PIN_CFG(4, ALT_A)
-#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP)
#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C)
#define GPIO5_GPIO PIN_CFG(5, GPIO)
#define GPIO5_U1_TXD PIN_CFG(5, ALT_A)
-#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP)
#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C)
#define GPIO6_GPIO PIN_CFG(6, GPIO)
#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A)
-#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP)
#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C)
#define GPIO7_GPIO PIN_CFG(7, GPIO)
#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A)
-#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP)
#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C)
#define GPIO8_GPIO PIN_CFG(8, GPIO)
-#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP)
-#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP)
+#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP)
+#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP)
#define GPIO9_GPIO PIN_CFG(9, GPIO)
-#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP)
-#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP)
+#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP)
+#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP)
#define GPIO10_GPIO PIN_CFG(10, GPIO)
-#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP)
-#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP)
+#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP)
#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C)
#define GPIO11_GPIO PIN_CFG(11, GPIO)
-#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP)
-#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP)
+#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP)
#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C)
#define GPIO12_GPIO PIN_CFG(12, GPIO)
@@ -87,66 +87,66 @@
#define GPIO16_GPIO PIN_CFG(16, GPIO)
#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A)
-#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP)
#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C)
#define GPIO17_GPIO PIN_CFG(17, GPIO)
#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A)
-#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP)
#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C)
#define GPIO18_GPIO PIN_CFG(18, GPIO)
-#define GPIO18_MC0_CMDDIR PIN_CFG_PULL(18, ALT_A, UP)
+#define GPIO18_MC0_CMDDIR PIN_CFG_INPUT(18, ALT_A, PULLUP)
#define GPIO18_U2_RXD PIN_CFG(18, ALT_B)
#define GPIO18_MS_IEP PIN_CFG(18, ALT_C)
#define GPIO19_GPIO PIN_CFG(19, GPIO)
-#define GPIO19_MC0_DAT0DIR PIN_CFG_PULL(19, ALT_A, UP)
+#define GPIO19_MC0_DAT0DIR PIN_CFG_INPUT(19, ALT_A, PULLUP)
#define GPIO19_U2_TXD PIN_CFG(19, ALT_B)
#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C)
#define GPIO20_GPIO PIN_CFG(20, GPIO)
-#define GPIO20_MC0_DAT2DIR PIN_CFG_PULL(20, ALT_A, UP)
+#define GPIO20_MC0_DAT2DIR PIN_CFG_INPUT(20, ALT_A, PULLUP)
#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B)
#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C)
#define GPIO21_GPIO PIN_CFG(21, GPIO)
-#define GPIO21_MC0_DAT31DIR PIN_CFG_PULL(21, ALT_A, UP)
+#define GPIO21_MC0_DAT31DIR PIN_CFG_INPUT(21, ALT_A, PULLUP)
#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B)
#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C)
#define GPIO22_GPIO PIN_CFG(22, GPIO)
-#define GPIO22_MC0_FBCLK PIN_CFG_PULL(22, ALT_A, UP)
+#define GPIO22_MC0_FBCLK PIN_CFG_INPUT(22, ALT_A, PULLUP)
#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B)
#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C)
#define GPIO23_GPIO PIN_CFG(23, GPIO)
-#define GPIO23_MC0_CLK PIN_CFG_PULL(23, ALT_A, UP)
+#define GPIO23_MC0_CLK PIN_CFG_INPUT(23, ALT_A, PULLUP)
#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B)
#define GPIO23_MS_CLK PIN_CFG(23, ALT_C)
#define GPIO24_GPIO PIN_CFG(24, GPIO)
-#define GPIO24_MC0_CMD PIN_CFG_PULL(24, ALT_A, UP)
+#define GPIO24_MC0_CMD PIN_CFG_INPUT(24, ALT_A, PULLUP)
#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B)
#define GPIO24_MS_BS PIN_CFG(24, ALT_C)
#define GPIO25_GPIO PIN_CFG(25, GPIO)
-#define GPIO25_MC0_DAT0 PIN_CFG_PULL(25, ALT_A, UP)
+#define GPIO25_MC0_DAT0 PIN_CFG_INPUT(25, ALT_A, PULLUP)
#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B)
#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C)
#define GPIO26_GPIO PIN_CFG(26, GPIO)
-#define GPIO26_MC0_DAT1 PIN_CFG_PULL(26, ALT_A, UP)
+#define GPIO26_MC0_DAT1 PIN_CFG_INPUT(26, ALT_A, PULLUP)
#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B)
#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C)
#define GPIO27_GPIO PIN_CFG(27, GPIO)
-#define GPIO27_MC0_DAT2 PIN_CFG_PULL(27, ALT_A, UP)
+#define GPIO27_MC0_DAT2 PIN_CFG_INPUT(27, ALT_A, PULLUP)
#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B)
#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C)
#define GPIO28_GPIO PIN_CFG(28, GPIO)
-#define GPIO28_MC0_DAT3 PIN_CFG_PULL(28, ALT_A, UP)
+#define GPIO28_MC0_DAT3 PIN_CFG_INPUT(28, ALT_A, PULLUP)
#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B)
#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C)
@@ -357,48 +357,48 @@
#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C)
#define GPIO128_GPIO PIN_CFG(128, GPIO)
-#define GPIO128_MC2_CLK PIN_CFG_PULL(128, ALT_A, UP)
+#define GPIO128_MC2_CLK PIN_CFG_INPUT(128, ALT_A, PULLUP)
#define GPIO128_SM_CKO PIN_CFG(128, ALT_B)
#define GPIO129_GPIO PIN_CFG(129, GPIO)
-#define GPIO129_MC2_CMD PIN_CFG_PULL(129, ALT_A, UP)
+#define GPIO129_MC2_CMD PIN_CFG_INPUT(129, ALT_A, PULLUP)
#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B)
#define GPIO130_GPIO PIN_CFG(130, GPIO)
-#define GPIO130_MC2_FBCLK PIN_CFG_PULL(130, ALT_A, UP)
+#define GPIO130_MC2_FBCLK PIN_CFG_INPUT(130, ALT_A, PULLUP)
#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B)
#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C)
#define GPIO131_GPIO PIN_CFG(131, GPIO)
-#define GPIO131_MC2_DAT0 PIN_CFG_PULL(131, ALT_A, UP)
+#define GPIO131_MC2_DAT0 PIN_CFG_INPUT(131, ALT_A, PULLUP)
#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B)
#define GPIO132_GPIO PIN_CFG(132, GPIO)
-#define GPIO132_MC2_DAT1 PIN_CFG_PULL(132, ALT_A, UP)
+#define GPIO132_MC2_DAT1 PIN_CFG_INPUT(132, ALT_A, PULLUP)
#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B)
#define GPIO133_GPIO PIN_CFG(133, GPIO)
-#define GPIO133_MC2_DAT2 PIN_CFG_PULL(133, ALT_A, UP)
+#define GPIO133_MC2_DAT2 PIN_CFG_INPUT(133, ALT_A, PULLUP)
#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B)
#define GPIO134_GPIO PIN_CFG(134, GPIO)
-#define GPIO134_MC2_DAT3 PIN_CFG_PULL(134, ALT_A, UP)
+#define GPIO134_MC2_DAT3 PIN_CFG_INPUT(134, ALT_A, PULLUP)
#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B)
#define GPIO135_GPIO PIN_CFG(135, GPIO)
-#define GPIO135_MC2_DAT4 PIN_CFG_PULL(135, ALT_A, UP)
+#define GPIO135_MC2_DAT4 PIN_CFG_INPUT(135, ALT_A, PULLUP)
#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B)
#define GPIO136_GPIO PIN_CFG(136, GPIO)
-#define GPIO136_MC2_DAT5 PIN_CFG_PULL(136, ALT_A, UP)
+#define GPIO136_MC2_DAT5 PIN_CFG_INPUT(136, ALT_A, PULLUP)
#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B)
#define GPIO137_GPIO PIN_CFG(137, GPIO)
-#define GPIO137_MC2_DAT6 PIN_CFG_PULL(137, ALT_A, UP)
+#define GPIO137_MC2_DAT6 PIN_CFG_INPUT(137, ALT_A, PULLUP)
#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B)
#define GPIO138_GPIO PIN_CFG(138, GPIO)
-#define GPIO138_MC2_DAT7 PIN_CFG_PULL(138, ALT_A, UP)
+#define GPIO138_MC2_DAT7 PIN_CFG_INPUT(138, ALT_A, PULLUP)
#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B)
#define GPIO139_GPIO PIN_CFG(139, GPIO)
@@ -434,10 +434,10 @@
#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A)
#define GPIO147_GPIO PIN_CFG(147, GPIO)
-#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP)
+#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP)
#define GPIO148_GPIO PIN_CFG(148, GPIO)
-#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP)
+#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP)
#define GPIO149_GPIO PIN_CFG(149, GPIO)
#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A)
@@ -459,82 +459,82 @@
#define GPIO152_KP_O9 PIN_CFG(152, ALT_C)
#define GPIO153_GPIO PIN_CFG(153, GPIO)
-#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN)
+#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN)
#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B)
#define GPIO153_U2_RXD PIN_CFG(153, ALT_C)
#define GPIO154_GPIO PIN_CFG(154, GPIO)
-#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN)
+#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN)
#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B)
#define GPIO154_U2_TXD PIN_CFG(154, ALT_C)
#define GPIO155_GPIO PIN_CFG(155, GPIO)
-#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN)
+#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN)
#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B)
#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C)
#define GPIO156_GPIO PIN_CFG(156, GPIO)
-#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN)
+#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN)
#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B)
#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C)
#define GPIO157_GPIO PIN_CFG(157, GPIO)
-#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP)
+#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP)
#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B)
#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C)
#define GPIO158_GPIO PIN_CFG(158, GPIO)
-#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP)
+#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP)
#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B)
#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C)
#define GPIO159_GPIO PIN_CFG(159, GPIO)
-#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP)
+#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP)
#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B)
#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C)
#define GPIO160_GPIO PIN_CFG(160, GPIO)
-#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP)
+#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP)
#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B)
#define GPIO160_NONE PIN_CFG(160, ALT_C)
#define GPIO161_GPIO PIN_CFG(161, GPIO)
-#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN)
+#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN)
#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B)
#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C)
#define GPIO162_GPIO PIN_CFG(162, GPIO)
-#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN)
+#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN)
#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B)
#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C)
#define GPIO163_GPIO PIN_CFG(163, GPIO)
-#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN)
+#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN)
#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B)
#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C)
#define GPIO164_GPIO PIN_CFG(164, GPIO)
-#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP)
+#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP)
#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B)
#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C)
#define GPIO165_GPIO PIN_CFG(165, GPIO)
-#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP)
+#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP)
#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B)
#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C)
#define GPIO166_GPIO PIN_CFG(166, GPIO)
-#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP)
+#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP)
#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B)
#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C)
#define GPIO167_GPIO PIN_CFG(167, GPIO)
-#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP)
+#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP)
#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B)
#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C)
#define GPIO168_GPIO PIN_CFG(168, GPIO)
-#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP)
+#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP)
#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B)
#define GPIO168_NONE PIN_CFG(168, ALT_C)
@@ -569,39 +569,39 @@
#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A)
#define GPIO197_GPIO PIN_CFG(197, GPIO)
-#define GPIO197_MC4_DAT3 PIN_CFG_PULL(197, ALT_A, UP)
+#define GPIO197_MC4_DAT3 PIN_CFG_INPUT(197, ALT_A, PULLUP)
#define GPIO198_GPIO PIN_CFG(198, GPIO)
-#define GPIO198_MC4_DAT2 PIN_CFG_PULL(198, ALT_A, UP)
+#define GPIO198_MC4_DAT2 PIN_CFG_INPUT(198, ALT_A, PULLUP)
#define GPIO199_GPIO PIN_CFG(199, GPIO)
-#define GPIO199_MC4_DAT1 PIN_CFG_PULL(199, ALT_A, UP)
+#define GPIO199_MC4_DAT1 PIN_CFG_INPUT(199, ALT_A, PULLUP)
#define GPIO200_GPIO PIN_CFG(200, GPIO)
-#define GPIO200_MC4_DAT0 PIN_CFG_PULL(200, ALT_A, UP)
+#define GPIO200_MC4_DAT0 PIN_CFG_INPUT(200, ALT_A, PULLUP)
#define GPIO201_GPIO PIN_CFG(201, GPIO)
-#define GPIO201_MC4_CMD PIN_CFG_PULL(201, ALT_A, UP)
+#define GPIO201_MC4_CMD PIN_CFG_INPUT(201, ALT_A, PULLUP)
#define GPIO202_GPIO PIN_CFG(202, GPIO)
-#define GPIO202_MC4_FBCLK PIN_CFG_PULL(202, ALT_A, UP)
+#define GPIO202_MC4_FBCLK PIN_CFG_INPUT(202, ALT_A, PULLUP)
#define GPIO202_PWL PIN_CFG(202, ALT_B)
#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C)
#define GPIO203_GPIO PIN_CFG(203, GPIO)
-#define GPIO203_MC4_CLK PIN_CFG_PULL(203, ALT_A, UP)
+#define GPIO203_MC4_CLK PIN_CFG_INPUT(203, ALT_A, PULLUP)
#define GPIO204_GPIO PIN_CFG(204, GPIO)
-#define GPIO204_MC4_DAT7 PIN_CFG_PULL(204, ALT_A, UP)
+#define GPIO204_MC4_DAT7 PIN_CFG_INPUT(204, ALT_A, PULLUP)
#define GPIO205_GPIO PIN_CFG(205, GPIO)
-#define GPIO205_MC4_DAT6 PIN_CFG_PULL(205, ALT_A, UP)
+#define GPIO205_MC4_DAT6 PIN_CFG_INPUT(205, ALT_A, PULLUP)
#define GPIO206_GPIO PIN_CFG(206, GPIO)
-#define GPIO206_MC4_DAT5 PIN_CFG_PULL(206, ALT_A, UP)
+#define GPIO206_MC4_DAT5 PIN_CFG_INPUT(206, ALT_A, PULLUP)
#define GPIO207_GPIO PIN_CFG(207, GPIO)
-#define GPIO207_MC4_DAT4 PIN_CFG_PULL(207, ALT_A, UP)
+#define GPIO207_MC4_DAT4 PIN_CFG_INPUT(207, ALT_A, PULLUP)
#define GPIO208_GPIO PIN_CFG(208, GPIO)
#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A)
@@ -632,21 +632,25 @@
#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A)
#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B)
#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C)
+#define GPIO215_SPI2_TXD PIN_CFG(215, ALT_C)
#define GPIO216_GPIO PIN_CFG(216, GPIO)
#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A)
#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B)
-#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP)
+#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP)
+#define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C)
#define GPIO217_GPIO PIN_CFG(217, GPIO)
#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A)
#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B)
#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C)
+#define GPIO217_SPI2_CLK PIN_CFG(217, ALT_C)
#define GPIO218_GPIO PIN_CFG(218, GPIO)
#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A)
#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B)
-#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP)
+#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP)
+#define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C)
#define GPIO219_GPIO PIN_CFG(219, GPIO)
#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A)
@@ -694,12 +698,12 @@
#define GPIO229_GPIO PIN_CFG(229, GPIO)
#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A)
#define GPIO229_PWL PIN_CFG(229, ALT_B)
-#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP)
+#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP)
#define GPIO230_GPIO PIN_CFG(230, GPIO)
#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A)
#define GPIO230_PWL PIN_CFG(230, ALT_B)
-#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP)
+#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP)
#define GPIO256_GPIO PIN_CFG(256, GPIO)
#define GPIO256_USB_NXT PIN_CFG(256, ALT_A)
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index eb51991..a19e398 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -96,7 +96,7 @@
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*/
- write_pen_release(cpu);
+ write_pen_release(cpu_logical_map(cpu));
gic_raise_softirq(cpumask_of(cpu), 1);
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
new file mode 100644
index 0000000..aea467d
--- /dev/null
+++ b/arch/arm/mach-ux500/timer.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
+ */
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/clksrc-dbx500-prcmu.h>
+
+#include <asm/localtimer.h>
+
+#include <plat/mtu.h>
+
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+static void __init ux500_timer_init(void)
+{
+ void __iomem *prcmu_timer_base;
+
+ if (cpu_is_u5500()) {
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = __io_address(U5500_TWD_BASE);
+#endif
+ mtu_base = __io_address(U5500_MTU0_BASE);
+ prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
+ } else if (cpu_is_u8500()) {
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = __io_address(U8500_TWD_BASE);
+#endif
+ mtu_base = __io_address(U8500_MTU0_BASE);
+ prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
+ } else {
+ ux500_unknown_soc();
+ }
+
+ /*
+ * Here we register the timerblocks active in the system.
+ * Localtimers (twd) is started when both cpu is up and running.
+ * MTU register a clocksource, clockevent and sched_clock.
+ * Since the MTU is located in the VAPE power domain
+ * it will be cleared in sleep which makes it unsuitable.
+ * We however need it as a timer tick (clockevent)
+ * during boot to calibrate delay until twd is started.
+ * RTC-RTT have problems as timer tick during boot since it is
+ * depending on delay which is not yet calibrated. RTC-RTT is in the
+ * always-on powerdomain and is used as clockevent instead of twd when
+ * sleeping.
+ * The PRCMU timer 4(3 for DB5500) register a clocksource and
+ * sched_clock with higher rating then MTU since is always-on.
+ *
+ */
+
+ nmdk_timer_init();
+ clksrc_dbx500_prcmu_init(prcmu_timer_base);
+}
+
+static void ux500_timer_reset(void)
+{
+ nmdk_clkevt_reset();
+ nmdk_clksrc_reset();
+}
+
+struct sys_timer ux500_timer = {
+ .init = ux500_timer_init,
+ .resume = ux500_timer_reset,
+};
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index 3668cf9..813ee08 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -65,7 +65,7 @@
for (;;) {
wfi();
- if (pen_release == cpu) {
+ if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 88633fe..67f75a0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -819,10 +819,10 @@
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
+ REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
- ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
+ ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_HIGHBANK
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 4c8fdbc..a08a951 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -4,50 +4,34 @@
menu "Freescale MXC Implementations"
-config ARCH_MX50_SUPPORTED
- bool
-
-config ARCH_MX53_SUPPORTED
- bool
-
choice
prompt "Freescale CPU family:"
- default ARCH_MX3
+ default ARCH_IMX_V6_V7
-config ARCH_MX1
- bool "MX1-based"
+config ARCH_IMX_V4_V5
+ bool "i.MX1, i.MX21, i.MX25, i.MX27"
+ select AUTO_ZRELADDR
+ select ARM_PATCH_PHYS_VIRT
help
- This enables support for systems based on the Freescale i.MX1 family
+ This enables support for systems based on the Freescale i.MX ARMv4
+ and ARMv5 SoCs
-config ARCH_MX2
- bool "MX2-based"
+config ARCH_IMX_V6_V7
+ bool "i.MX3, i.MX6"
+ select AUTO_ZRELADDR if !ZBOOT_ROM
+ select ARM_PATCH_PHYS_VIRT
help
- This enables support for systems based on the Freescale i.MX2 family
+ This enables support for systems based on the Freescale i.MX3 and i.MX6
+ family.
-config ARCH_MX25
- bool "MX25-based"
- help
- This enables support for systems based on the Freescale i.MX25 family
-
-config ARCH_MX3
- bool "MX3-based"
- help
- This enables support for systems based on the Freescale i.MX3 family
-
-config ARCH_MX503
- bool "i.MX50 + i.MX53"
- select ARCH_MX50_SUPPORTED
- select ARCH_MX53_SUPPORTED
+config ARCH_MX5
+ bool "i.MX50, i.MX51, i.MX53"
+ select AUTO_ZRELADDR
+ select ARM_PATCH_PHYS_VIRT
help
This enables support for machines using Freescale's i.MX50 and i.MX53
processors.
-config ARCH_MX51
- bool "i.MX51"
- select ARCH_MX51_SUPPORTED
- help
- This enables support for systems based on the Freescale i.MX51 family
-
endchoice
source "arch/arm/mach-imx/Kconfig"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index d53c35f..b9f0f5f 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,7 +5,7 @@
# Common support
obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
-# MX51 uses the TZIC interrupt controller, older platforms use AVIC
+obj-$(CONFIG_ARM_GIC) += gic.o
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 175e364..8cced35 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -187,18 +187,11 @@
static int mxc_audmux_v2_init(void)
{
int ret;
-#if defined(CONFIG_ARCH_MX5)
if (cpu_is_mx51()) {
audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
- ret = 0;
- return ret;
- }
-#endif
-#if defined(CONFIG_ARCH_MX3)
- if (cpu_is_mx31())
+ } else if (cpu_is_mx31()) {
audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
-
- else if (cpu_is_mx35()) {
+ } else if (cpu_is_mx35()) {
audmux_clk = clk_get(NULL, "audmux");
if (IS_ERR(audmux_clk)) {
ret = PTR_ERR(audmux_clk);
@@ -207,10 +200,7 @@
return ret;
}
audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
- }
-#endif
-#if defined(CONFIG_SOC_IMX25)
- if (cpu_is_mx25()) {
+ } else if (cpu_is_mx25()) {
audmux_clk = clk_get(NULL, "audmux");
if (IS_ERR(audmux_clk)) {
ret = PTR_ERR(audmux_clk);
@@ -220,7 +210,7 @@
}
audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
}
-#endif /* if defined(CONFIG_SOC_IMX25) */
+
audmux_debugfs_init();
return 0;
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 55d2534..8875fb4 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -50,6 +50,8 @@
void __iomem *avic_base;
+static u32 avic_saved_mask_reg[2];
+
#ifdef CONFIG_MXC_IRQ_PRIOR
static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
{
@@ -90,24 +92,8 @@
}
#endif /* CONFIG_FIQ */
-/* Disable interrupt number "irq" in the AVIC */
-static void mxc_mask_irq(struct irq_data *d)
-{
- __raw_writel(d->irq, avic_base + AVIC_INTDISNUM);
-}
-/* Enable interrupt number "irq" in the AVIC */
-static void mxc_unmask_irq(struct irq_data *d)
-{
- __raw_writel(d->irq, avic_base + AVIC_INTENNUM);
-}
-
-static struct mxc_irq_chip mxc_avic_chip = {
- .base = {
- .irq_ack = mxc_mask_irq,
- .irq_mask = mxc_mask_irq,
- .irq_unmask = mxc_unmask_irq,
- },
+static struct mxc_extra_irq avic_extra_irq = {
#ifdef CONFIG_MXC_IRQ_PRIOR
.set_priority = avic_irq_set_priority,
#endif
@@ -116,6 +102,68 @@
#endif
};
+#ifdef CONFIG_PM
+static void avic_irq_suspend(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ int idx = gc->irq_base >> 5;
+
+ avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
+ __raw_writel(gc->wake_active, avic_base + ct->regs.mask);
+}
+
+static void avic_irq_resume(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct irq_chip_type *ct = gc->chip_types;
+ int idx = gc->irq_base >> 5;
+
+ __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+}
+
+#else
+#define avic_irq_suspend NULL
+#define avic_irq_resume NULL
+#endif
+
+static __init void avic_init_gc(unsigned int irq_start)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+ int idx = irq_start >> 5;
+
+ gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base,
+ handle_level_irq);
+ gc->private = &avic_extra_irq;
+ gc->wake_enabled = IRQ_MSK(32);
+
+ ct = gc->chip_types;
+ ct->chip.irq_mask = irq_gc_mask_clr_bit;
+ ct->chip.irq_unmask = irq_gc_mask_set_bit;
+ ct->chip.irq_ack = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = avic_irq_suspend;
+ ct->chip.irq_resume = avic_irq_resume;
+ ct->regs.mask = !idx ? AVIC_INTENABLEL : AVIC_INTENABLEH;
+ ct->regs.ack = ct->regs.mask;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
+}
+
+asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
+{
+ u32 nivector;
+
+ do {
+ nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
+ if (nivector == 0xffff)
+ break;
+
+ handle_IRQ(nivector, regs);
+ } while (1);
+}
+
/*
* This function initializes the AVIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
@@ -140,11 +188,9 @@
/* all IRQ no FIQ */
__raw_writel(0, avic_base + AVIC_INTTYPEH);
__raw_writel(0, avic_base + AVIC_INTTYPEL);
- for (i = 0; i < AVIC_NUM_IRQS; i++) {
- irq_set_chip_and_handler(i, &mxc_avic_chip.base,
- handle_level_irq);
- set_irq_flags(i, IRQF_VALID);
- }
+
+ for (i = 0; i < AVIC_NUM_IRQS; i += 32)
+ avic_init_gc(i);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
@@ -157,4 +203,3 @@
printk(KERN_INFO "MXC IRQ initialized\n");
}
-
diff --git a/arch/arm/plat-mxc/cpu.c b/arch/arm/plat-mxc/cpu.c
index 386e0d5..f5b7e0f 100644
--- a/arch/arm/plat-mxc/cpu.c
+++ b/arch/arm/plat-mxc/cpu.c
@@ -1,5 +1,6 @@
#include <linux/module.h>
+#include <mach/hardware.h>
unsigned int __mxc_cpu_type;
EXPORT_SYMBOL(__mxc_cpu_type);
@@ -9,3 +10,11 @@
__mxc_cpu_type = type;
}
+void imx_print_silicon_rev(const char *cpu, int srev)
+{
+ if (srev == IMX_CHIP_REVISION_UNKNOWN)
+ pr_info("CPU identified as %s, unknown revision\n", cpu);
+ else
+ pr_info("CPU identified as %s, silicon rev %d.%d\n",
+ cpu, (srev >> 4) & 0xf, srev & 0xf);
+}
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index a34b2ae..4d55a7a 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -23,20 +23,6 @@
#include <linux/platform_device.h>
#include <mach/common.h>
-int __init mxc_register_device(struct platform_device *pdev, void *data)
-{
- int ret;
-
- pdev->dev.platform_data = data;
-
- ret = platform_device_register(pdev);
- if (ret)
- pr_debug("Unable to register platform device '%s': %d\n",
- pdev->name, ret);
-
- return ret;
-}
-
struct device mxc_aips_bus = {
.init_name = "mxc_aips",
.parent = &platform_bus,
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index bd294ad..cb3e3ee 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -1,6 +1,6 @@
config IMX_HAVE_PLATFORM_FEC
bool
- default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+ default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
config IMX_HAVE_PLATFORM_FLEXCAN
select HAVE_CAN_FLEXCAN if CAN
@@ -31,6 +31,9 @@
config IMX_HAVE_PLATFORM_IMX_KEYPAD
bool
+config IMX_HAVE_PLATFORM_PATA_IMX
+ bool
+
config IMX_HAVE_PLATFORM_IMX_SSI
bool
@@ -76,3 +79,7 @@
config IMX_HAVE_PLATFORM_SPI_IMX
bool
+
+config IMX_HAVE_PLATFORM_AHCI
+ bool
+ default y if ARCH_MX53
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index b41bf97..c11ac84 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -10,6 +10,7 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_PATA_IMX) += platform-pata_imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
@@ -25,3 +26,4 @@
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
new file mode 100644
index 0000000..d8a56ae
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ahci_imx_data_entry_single(soc, _devid) \
+ { \
+ .devid = _devid, \
+ .iobase = soc ## _SATA_BASE_ADDR, \
+ .irq = soc ## _INT_SATA, \
+ }
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+ imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
+#endif
+
+enum {
+ HOST_CAP = 0x00,
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_PORTS_IMPL = 0x0c,
+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+static struct clk *sata_clk, *sata_ref_clk;
+
+/* AHCI module Initialization, if return 0, initialization is successful. */
+static int imx_sata_init(struct device *dev, void __iomem *addr)
+{
+ u32 tmpdata;
+ int ret = 0;
+ struct clk *clk;
+
+ sata_clk = clk_get(dev, "ahci");
+ if (IS_ERR(sata_clk)) {
+ dev_err(dev, "no sata clock.\n");
+ return PTR_ERR(sata_clk);
+ }
+ ret = clk_enable(sata_clk);
+ if (ret) {
+ dev_err(dev, "can't enable sata clock.\n");
+ goto put_sata_clk;
+ }
+
+ /* Get the AHCI SATA PHY CLK */
+ sata_ref_clk = clk_get(dev, "ahci_phy");
+ if (IS_ERR(sata_ref_clk)) {
+ dev_err(dev, "no sata ref clock.\n");
+ ret = PTR_ERR(sata_ref_clk);
+ goto release_sata_clk;
+ }
+ ret = clk_enable(sata_ref_clk);
+ if (ret) {
+ dev_err(dev, "can't enable sata ref clock.\n");
+ goto put_sata_ref_clk;
+ }
+
+ /* Get the AHB clock rate, and configure the TIMER1MS reg later */
+ clk = clk_get(dev, "ahci_dma");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "no dma clock.\n");
+ ret = PTR_ERR(clk);
+ goto release_sata_ref_clk;
+ }
+ tmpdata = clk_get_rate(clk) / 1000;
+ clk_put(clk);
+
+ writel(tmpdata, addr + HOST_TIMER1MS);
+
+ tmpdata = readl(addr + HOST_CAP);
+ if (!(tmpdata & HOST_CAP_SSS)) {
+ tmpdata |= HOST_CAP_SSS;
+ writel(tmpdata, addr + HOST_CAP);
+ }
+
+ if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
+ writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
+ addr + HOST_PORTS_IMPL);
+
+ return 0;
+
+release_sata_ref_clk:
+ clk_disable(sata_ref_clk);
+put_sata_ref_clk:
+ clk_put(sata_ref_clk);
+release_sata_clk:
+ clk_disable(sata_clk);
+put_sata_clk:
+ clk_put(sata_clk);
+
+ return ret;
+}
+
+static void imx_sata_exit(struct device *dev)
+{
+ clk_disable(sata_ref_clk);
+ clk_put(sata_ref_clk);
+
+ clk_disable(sata_clk);
+ clk_put(sata_clk);
+
+}
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ return imx_add_platform_device_dmamask(data->devid, 0,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
+
+struct platform_device *__init imx53_add_ahci_imx(void)
+{
+ struct ahci_platform_data pdata = {
+ .init = imx_sata_init,
+ .exit = imx_sata_exit,
+ };
+
+ return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
index 23ce08e..848038f 100644
--- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
@@ -36,6 +36,11 @@
imx_fsl_usb2_udc_data_entry_single(MX35);
#endif /* ifdef CONFIG_SOC_IMX35 */
+#ifdef CONFIG_SOC_IMX51
+const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX51);
+#endif
+
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index afe60f7..19ad580 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -85,6 +85,12 @@
imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
imx51_imx_i2c_data_entry(0, 1),
imx51_imx_i2c_data_entry(1, 2),
+ {
+ .id = 2,
+ .iobase = MX51_HSI2C_DMA_BASE_ADDR,
+ .iosize = SZ_16K,
+ .irq = MX51_INT_HS_I2C,
+ },
};
#endif /* ifdef CONFIG_SOC_IMX51 */
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
index e1763e0..35851d8 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
@@ -49,6 +49,15 @@
imx_mxc_ehci_data_entry_single(MX35, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX35 */
+#ifdef CONFIG_SOC_IMX51
+const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
+ imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
+const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
+ imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
+ imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
struct platform_device *__init imx_add_mxc_ehci(
const struct imx_mxc_ehci_data *data,
const struct mxc_usbh_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/devices/platform-pata_imx.c b/arch/arm/plat-mxc/devices/platform-pata_imx.c
new file mode 100644
index 0000000..70e2f2a
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-pata_imx.c
@@ -0,0 +1,59 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_pata_imx_data_entry_single(soc, _size) \
+ { \
+ .iobase = soc ## _ATA_BASE_ADDR, \
+ .iosize = _size, \
+ .irq = soc ## _INT_ATA, \
+ }
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_pata_imx_data imx27_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_pata_imx_data imx31_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX31, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_pata_imx_data imx35_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX35, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_pata_imx_data imx51_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX51, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_pata_imx_data imx53_pata_imx_data __initconst =
+ imx_pata_imx_data_entry_single(MX53, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
+struct platform_device *__init imx_add_pata_imx(
+ const struct imx_pata_imx_data *data)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + data->iosize - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+ return imx_add_platform_device("pata_imx", -1,
+ res, ARRAY_SIZE(res), NULL, 0);
+}
+
diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
new file mode 100644
index 0000000..b3b8eed
--- /dev/null
+++ b/arch/arm/plat-mxc/gic.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/io.h>
+#include <asm/exception.h>
+#include <asm/localtimer.h>
+#include <asm/hardware/gic.h>
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#endif
+
+asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+{
+ u32 irqstat, irqnr;
+
+ do {
+ irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
+ irqnr = irqstat & 0x3ff;
+ if (irqnr == 1023)
+ break;
+
+ if (irqnr > 29 && irqnr < 1021)
+ handle_IRQ(irqnr, regs);
+#ifdef CONFIG_SMP
+ else if (irqnr < 16) {
+ writel_relaxed(irqstat, gic_cpu_base_addr +
+ GIC_CPU_EOI);
+ handle_IPI(irqnr, regs);
+ }
+#endif
+#ifdef CONFIG_LOCAL_TIMERS
+ else if (irqnr == 29) {
+ writel_relaxed(irqstat, gic_cpu_base_addr +
+ GIC_CPU_EOI);
+ handle_local_timer(regs);
+ }
+#endif
+ } while (1);
+}
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4e3d978..83b745a 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -13,6 +13,7 @@
struct platform_device;
struct clk;
+enum mxc_cpu_pwr_mode;
extern void mx1_map_io(void);
extern void mx21_map_io(void);
@@ -64,12 +65,72 @@
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
+extern int mx51_clocks_init_dt(void);
+extern int mx53_clocks_init_dt(void);
+extern int mx6q_clocks_init(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_arch_reset_init(void __iomem *);
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
+
+enum mxc_cpu_pwr_mode {
+ WAIT_CLOCKED, /* wfi only */
+ WAIT_UNCLOCKED, /* WAIT */
+ WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
+ STOP_POWER_ON, /* just STOP */
+ STOP_POWER_OFF, /* STOP + SRPG */
+};
+
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
+extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
+void gic_handle_irq(struct pt_regs *);
+
+#define imx1_handle_irq avic_handle_irq
+#define imx21_handle_irq avic_handle_irq
+#define imx25_handle_irq avic_handle_irq
+#define imx27_handle_irq avic_handle_irq
+#define imx31_handle_irq avic_handle_irq
+#define imx35_handle_irq avic_handle_irq
+#define imx50_handle_irq tzic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
+#define imx6q_handle_irq gic_handle_irq
+
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+#ifdef CONFIG_DEBUG_LL
+extern void imx_lluart_map_io(void);
+#else
+static inline void imx_lluart_map_io(void) {}
+#endif
+extern void v7_cpu_resume(void);
+extern u32 *pl310_get_save_ptr(void);
+#ifdef CONFIG_SMP
+extern void v7_secondary_startup(void);
+extern void imx_scu_map_io(void);
+extern void imx_smp_prepare(void);
+#else
+static inline void imx_scu_map_io(void) {}
+static inline void imx_smp_prepare(void) {}
+#endif
+extern void imx_enable_cpu(int cpu, bool enable);
+extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern void imx_src_init(void);
+extern void imx_gpc_init(void);
+extern void imx_gpc_pre_suspend(void);
+extern void imx_gpc_post_resume(void);
+extern void imx51_babbage_common_init(void);
+extern void imx53_ard_common_init(void);
+extern void imx53_evk_common_init(void);
+extern void imx53_qsb_common_init(void);
+extern void imx53_smd_common_init(void);
+extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
+extern void imx6q_pm_init(void);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index a304593..6e192c4 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -12,44 +12,20 @@
*/
#include <mach/hardware.h>
-#ifdef CONFIG_SOC_IMX1
+#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR MX1_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX25
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR MX25_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
#define UART_PADDR MX2x_UART1_BASE_ADDR
-#endif
-
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
#define UART_PADDR MX3x_UART1_BASE_ADDR
-#endif
-
-#ifdef CONFIG_SOC_IMX51
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR MX51_UART1_BASE_ADDR
-#endif
-
-/* iMX50/53 have same addresses, but not iMX51 */
-#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
+#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 543525d..def9ba5 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -263,6 +263,14 @@
const struct imx_mxc_nand_data *data,
const struct mxc_nand_platform_data *pdata);
+struct imx_pata_imx_data {
+ resource_size_t iobase;
+ resource_size_t iosize;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_pata_imx(
+ const struct imx_pata_imx_data *data);
+
struct imx_mxc_pwm_data {
int id;
resource_size_t iobase;
@@ -313,3 +321,13 @@
struct platform_device *imx_add_imx_dma(void);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+ const char *devid;
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 066d464..9fe0dfc 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,72 +9,22 @@
* published by the Free Software Foundation.
*/
-#include <mach/hardware.h>
+/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
-#define AVIC_NIMASK 0x04
-
- @ this macro disables fast irq (not implemented)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
-#ifndef CONFIG_MXC_TZIC
- ldr \base, =avic_base
- ldr \base, [\base]
-#ifdef CONFIG_MXC_IRQ_PRIOR
- ldr r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
- ldr \base, =tzic_base
- ldr \base, [\base]
-#endif /* CONFIG_MXC_TZIC */
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
- @ this macro checks which interrupt occurred
- @ and returns its number in irqnr
- @ and returns if an interrupt occurred in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-#ifndef CONFIG_MXC_TZIC
- @ Load offset & priority of the highest priority
- @ interrupt pending from AVIC_NIVECSR
- ldr \irqstat, [\base, #0x40]
- @ Shift to get the decoded IRQ number, using ASR so
- @ 'no interrupt pending' becomes 0xffffffff
- mov \irqnr, \irqstat, asr #16
- @ set zero flag if IRQ + 1 == 0
- adds \tmp, \irqnr, #1
-#ifdef CONFIG_MXC_IRQ_PRIOR
- bicne \tmp, \irqstat, #0xFFFFFFE0
- strne \tmp, [\base, #AVIC_NIMASK]
- streq r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
- @ Load offset & priority of the highest priority
- @ interrupt pending.
- @ 0x080 is INTSEC0 register
- @ 0xD80 is HIPND0 register
- mov \irqnr, #0
-1000: add \irqstat, \base, \irqnr, lsr #3
- ldr \tmp, [\irqstat, #0xd80]
- ldr \irqstat, [\irqstat, #0x080]
- ands \tmp, \tmp, \irqstat
- bne 1001f
- add \irqnr, \irqnr, #32
- cmp \irqnr, #128
- blo 1000b
- b 2001f
-1001: mov \irqstat, #1
-1002: tst \tmp, \irqstat
- bne 2002f
- movs \tmp, \tmp, lsr #1
- addne \irqnr, \irqnr, #1
- bne 1002b
-2001:
- mov \irqnr, #0
-2002:
- movs \irqnr, \irqnr
-#endif
+ .endm
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ .endm
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
.endm
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 3e1ffc8..40a8c17 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -1,33 +1 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_GPIO_H__
-#define __ASM_ARCH_MXC_GPIO_H__
-
-#include <linux/spinlock.h>
-#include <mach/hardware.h>
-
-
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
-/* range e.g. GPIO_1_5 is gpio 5 under linux */
-#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
-
-#define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio))
-#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
-
-#endif
+/* empty */
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index a8bfd56..a599f01 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -81,11 +81,21 @@
* AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
* mx51:
+ * TZIC 0xe0000000+0x004000 -> 0xf5000000+0x004000
* IRAM 0x1ffe0000+0x020000 -> 0xf4fe0000+0x020000
- * DEBUG 0x60000000+0x100000 -> 0xf5000000+0x100000
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
+ * mx53:
+ * TZIC 0x0fffc000+0x004000 -> 0xf4bfc000+0x004000
+ * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
+ * AIPS1 0x53f00000+0x100000 -> 0xf5700000+0x100000
+ * AIPS2 0x63f00000+0x100000 -> 0xf5300000+0x100000
+ * mx6q:
+ * SCU 0x00a00000+0x001000 -> 0xf4000000+0x001000
+ * CCM 0x020c4000+0x004000 -> 0xf42c4000+0x004000
+ * ANATOP 0x020c8000+0x001000 -> 0xf42c8000+0x001000
+ * UART4 0x021f0000+0x004000 -> 0xf42f0000+0x004000
*/
#define IMX_IO_P2V(x) ( \
0xf4000000 + \
@@ -97,6 +107,7 @@
#include <mach/mxc.h>
+#include <mach/mx6q.h>
#include <mach/mx50.h>
#include <mach/mx51.h>
#include <mach/mx53.h>
@@ -116,4 +127,10 @@
.type = _type, \
}
+/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* range e.g. GPIO_1_5 is gpio 5 under linux */
+#define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr))
+
+#define IMX_GPIO_TO_IRQ(gpio) (MXC_GPIO_IRQ_START + (gpio))
+
#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
index 4a5dc5c..375cdd0 100644
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ b/arch/arm/plat-mxc/include/mach/i2c.h
@@ -11,14 +11,10 @@
/**
* struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @init: Initialise gpio's and other board specific things
- * @exit: Free everything initialised by @init
* @bitrate: Bus speed measured in Hz
*
**/
struct imxi2c_platform_data {
- int (*init)(struct device *dev);
- void (*exit)(struct device *dev);
int bitrate;
};
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 4347a87..338300b 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -14,32 +14,22 @@
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffffffff
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#include <mach/hardware.h>
-
#define __arch_ioremap __imx_ioremap
#define __arch_iounmap __iounmap
#define addr_in_module(addr, mod) \
((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
+extern void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int);
+
static inline void __iomem *
__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
{
- if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) {
- /*
- * Access all peripherals below 0x80000000 as nonshared device
- * on mx3, but leave l2cc alone. Otherwise cache corruptions
- * can occur.
- */
- if (phys_addr < 0x80000000 &&
- !addr_in_module(phys_addr, MX3x_L2CC))
- mtype = MT_DEVICE_NONSHARED;
- }
-
- return __arm_ioremap(phys_addr, size, mtype);
+ if (imx_ioremap != NULL)
+ return imx_ioremap(phys_addr, size, mtype);
+ else
+ return __arm_ioremap(phys_addr, size, mtype);
}
-#endif
/* io address mapping macro */
#define __io(a) __typesafe_io(a)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c92f0b1..63f22a0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -735,6 +735,7 @@
#define MX31_PIN_KEY_COL5_KEY_COL5 IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL6_KEY_COL6 IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_KEY_COL7_KEY_COL7 IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
/*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index df6acc0..c7f5169a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -14,6 +14,8 @@
#define __MACH_IOMUX_MX51_H__
#include <mach/iomux-v3.h>
+#define __NA_ 0x000
+
/* Pad control groupings */
#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
@@ -47,1521 +49,765 @@
/* Raw pin modes without pad control */
/* PAD MUX ALT INPSE PATH PADCTRL */
-#define _MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x5c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x5c, 7, 0x08d8, 0, 0)
-#define _MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x5c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x5c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x5c, 0x14, 0x09b4, 0, 0)
-#define _MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x5c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x5c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x60, 7, 0x08d4, 0, 0)
-#define _MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x60, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x60, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x60, 3, 0x09ec, 0, 0)
-#define _MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x60, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x60, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x64, 7, 0x08e4, 0, 0)
-#define _MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x64, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x64, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x64, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x64, 4, 0x09f0, 1, 0)
-#define _MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x64, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x68, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x68, 7, 0x08e8, 0, 0)
-#define _MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x68, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x68, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x68, 0x14, 0x09b0, 0, 0)
-#define _MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x68, 3, 0x09e8, 1, 0)
-#define _MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x68, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x6c, 5, 0x08c8, 0, 0)
-#define _MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x6c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x6c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x6c, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x6c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x70, 5, 0x08c4, 0, 0)
-#define _MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x70, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x70, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x70, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x70, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x74, 5, 0x08cc, 0, 0)
-#define _MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x74, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x74, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x74, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x78, 5, 0x08d0, 0, 0)
-#define _MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x78, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x78, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x78, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x78, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x7c, 5, 0x08f8, 0, 0)
-#define _MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x7c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x7c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x7c, 0x14, 0x09bc, 0, 0)
-#define _MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x7c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x7c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x80, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x80, 1, 0x09c8, 0, 0)
-#define _MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x80, 4, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x80, 3, 0x09f4, 0, 0)
-#define _MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x80, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x84, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x84, 1, 0x09cc, 0, 0)
-#define _MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x84, 4, 0x09e8, 3, 0)
-#define _MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x84, 3, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x84, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x88, 5, 0x08f4, 0, 0)
-#define _MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x88, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x88, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x88, 0x14, 0x09b8, 0, 0)
-#define _MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x88, 3, 0x09f0, 3, 0)
-#define _MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x88, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x8c, 5, 0x08f0, 0, 0)
-#define _MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x8c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x8c, 1, 0x09d0, 0, 0)
-#define _MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x8c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x90, 5, 0x08ec, 0, 0)
-#define _MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x90, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x90, 1, 0x09d4, 0, 0)
-#define _MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x90, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x94, 5, 0x08fc, 0, 0)
-#define _MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x94, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x94, 1, 0x09d8, 0, 0)
-#define _MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x94, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x98, 5, 0x0900, 0, 0)
-#define _MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x98, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x98, 1, 0x09dc, 0, 0)
-#define _MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x98, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x9c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x9c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x9c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0xa0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0xa0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0xa0, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0xa4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0xa4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0xa4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0xa8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0xa8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0xa8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0xac, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0xac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0xac, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0xb0, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0xb0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0xb0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0xb4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0xb4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0xb8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0xb8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0xb8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0xbc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0xbc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0xbc, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0xc0, 6, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0xc0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0xc0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0xc0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0xc4, 5, 0x09a0, 0, 0)
-#define _MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0xc4, 6, 0x0908, 0, 0)
-#define _MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0xc4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0xc4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0xc4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0xc8, 5, 0x099c, 0, 0)
-#define _MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0xc8, 6, 0x09a4, 0, 0)
-#define _MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0xc8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0xc8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0xc8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0xcc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0xd0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0xd4, 6, 0x08e0, 0, 0)
-#define _MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0xd4, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0xd4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0xd4, 3, 0x0954, 0, 0)
-#define _MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0xd4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0xd4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0xd8, 6, 0x08dc, 0, 0)
-#define _MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0xd8, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0xd8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0xd8, 3, 0x095c, 0, 0)
-#define _MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0xd8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0xd8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0xdc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0xdc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0xe0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0xe0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0xe4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0xe4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0xe8, 6, 0x08d8, 1, 0)
-#define _MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0xe8, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0xe8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0xe8, 3, 0x0960, 0, 0)
-#define _MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0xe8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0xe8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0xec, 6, 0x08d4, 1, 0)
-#define _MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0xec, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0xec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0xec, 3, 0x0964, 0, 0)
-#define _MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0xec, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0xec, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0xf0, 6, 0x08e4, 1, 0)
-#define _MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0xf0, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0xf0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0xf0, 3, 0x0970, 0, 0)
-#define _MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0xf0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0xf0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0xf4, 6, 0x08e8, 1, 0)
-#define _MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0xf4, 5, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0xf4, 4, 0x0904, 0, 0)
-#define _MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0xf4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0xf4, 3, 0x0950, 0, 0)
-#define _MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0xf4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0xf4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0xf8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0xf8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0xfc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0xfc, 1, 0x0978, 0, 0)
-#define _MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x097c, 0, 0)
-#define _MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x0980, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x093c, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x0984, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x0940, 0, 0)
-#define _MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x0988, 0, 0)
-#define _MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x098c, 0, 0)
-#define _MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x0990, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x0944, 0, 0)
-#define _MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x0930, 0, 0)
-#define _MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x0994, 0, 0)
-#define _MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x0948, 0, 0)
-#define _MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x091c, 0, 0)
-#define _MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x09a8, 0, 0)
-#define _MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x094c, 0, 0)
-#define _MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0x0a20, 0, 0)
-#define _MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x0968, 0, 0)
-#define _MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x09f8, 0, 0)
-#define _MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x0998, 0, 0)
-#define _MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x0914, 0, 0)
-#define _MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0x0a24, 0, 0)
-#define _MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0x0a1c, 0, 0)
-#define _MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x0928, 0, 0)
-#define _MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0974, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x0938, 0, 0)
-#define _MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x0934, 0, 0)
-#define _MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x0930, 1, 0)
-#define _MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x096c, 0, 0)
-#define _MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x0948, 1, 0)
-#define _MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x0944, 1, 0)
-#define _MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x0958, 0, 0)
-#define _MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x0940, 1, 0)
-#define _MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x093c, 1, 0)
-#define _MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x09fc, 0, 0)
-#define _MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0x0a00, 0, 0)
-#define _MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0x0a04, 0, 0)
-#define _MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0x0a08, 0, 0)
-#define _MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0x0a0c, 0, 0)
-#define _MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0x0a10, 0, 0)
-#define _MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0x0a14, 0, 0)
-#define _MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, 0x0000, 0, 0)
-#define _MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0x0a18, 0, 0)
-#define _MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x0998, 1, 0)
-#define _MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, 0x000, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, 0x000, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, 0x0000, 0, 0)
-#define _MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x09f4, 2, 0)
-#define _MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x09b4, 1, 0)
-#define _MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x08c4, 1, 0)
-#define _MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x08cc, 1, 0)
-#define _MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x08c8, 1, 0)
-#define _MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x08d0, 1, 0)
-#define _MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0000, 0, 0)
-#define _MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x09b0, 1, 0)
-#define _MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x09e4, 0, 0)
-#define _MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x09e0, 0, 0)
-#define _MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0)
-#define _MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x09f4, 4, 0)
-#define _MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, 0x0000, 0, 0)
-#define _MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, 0x0000, 0, 0)
-#define _MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, 0x0000, 0, 0)
-#define _MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, 0x0000, 0, 0)
-#define _MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x090c, 0, 0)
-#define _MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x0910, 0, 0)
-#define _MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x09b8, 1, 0)
-#define _MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x09f0, 4, 0)
-#define _MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x09bc, 1, 0)
-#define _MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, 0x0000, 0, 0)
-#define _MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x0914, 1, 0)
-#define _MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x09b8, 2, 0)
-#define _MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x091c, 1, 0)
-#define _MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x09bc, 2, 0)
-#define _MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x09f4, 6, 0)
-#define _MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x0918, 0, 0)
-#define _MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0)
-#define _MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0)
-#define _MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x0920, 0, 0)
-#define _MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x0928, 1, 0)
-#define _MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x0934, 1, 0)
-#define _MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x0978, 1, 0)
-#define _MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x097c, 1, 0)
-#define _MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x0980, 1, 0)
-#define _MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x0984, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x09a4, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x09c4, 0, 0)
-#define _MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x0988, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x09c4, 1, 0)
-#define _MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x098c, 1, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x0990, 1, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x0994, 1, 0)
-#define _MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x09a8, 1, 0)
-#define _MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x09a0, 1, 0)
-#define _MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x09c0, 0, 0)
-#define _MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x099c, 1, 0)
-#define _MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x0950, 1, 0)
-#define _MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x0954, 1, 0)
-#define _MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x095c, 1, 0)
-#define _MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x09c0, 1, 0)
-#define _MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, 0x0000, 0, 0)
-#define _MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x0960, 1, 0)
-#define _MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x0964, 1, 0)
-#define _MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x09c8, 1, 0)
-#define _MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x09f4, 8, 0)
-#define _MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x09f8, 1, 0)
-#define _MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x0970, 1, 0)
-#define _MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x09cc, 1, 0)
-#define _MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0x0a1c, 1, 0)
-#define _MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x09d0, 1, 0)
-#define _MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0x0a24, 1, 0)
-#define _MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x09d4, 1, 0)
-#define _MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0x0a20, 1, 0)
-#define _MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x09d8, 1, 0)
-#define _MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x09fc, 1, 0)
-#define _MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x08f4, 1, 0)
-#define _MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0x0a00, 1, 0)
-#define _MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x094c, 1, 0)
-#define _MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x09dc, 1, 0)
-#define _MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0x0a04, 1, 0)
-#define _MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x08f0, 1, 0)
-#define _MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x0968, 1, 0)
-#define _MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0x0a08, 1, 0)
-#define _MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x08ec, 1, 0)
-#define _MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x096c, 1, 0)
-#define _MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0x0a0c, 1, 0)
-#define _MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x08fc, 1, 0)
-#define _MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x0974, 1, 0)
-#define _MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0x0a10, 1, 0)
-#define _MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x0900, 1, 0)
-#define _MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x0958, 1, 0)
-#define _MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0x0a14, 1, 0)
-#define _MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x08f8, 1, 0)
-#define _MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, 0x0000, 0, 0)
-#define _MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0x0a18, 1, 0)
-#define _MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x08e0, 1, 0)
-#define _MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x091c, 2, 0)
-#define _MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x08dc, 1, 0)
-#define _MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x0914, 2, 0)
-#define _MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x08d8, 2, 0)
-#define _MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x0918, 1, 0)
-#define _MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x000, 0x01c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x000, 0x020, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x000, 0x024, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x000, 0x028, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x08d4, 2, 0)
-#define _MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x000, 0x02c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x000, 0x030, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x000, 0x034, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x000, 0x038, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x08e4, 2, 0)
-#define _MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x000, 0x044, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x000, 0x048, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x000, 0x03c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x000, 0x040, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x08e8, 2, 0)
-#define _MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x0920, 1, 0)
-#define _MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x0924, 0, 0)
-#define _MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x0918, 2, 0)
-#define _MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x000, 0x04c, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x000, 0x050, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x000, 0x054, 0, 0x0000, 0, 0)
-#define _MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x000, 0x058, 0, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x000, 0x3b4, 2, 0x091c, 3, 0)
-#define _MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x09b0, 2, 0)
-#define _MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x0914, 3, 0)
-#define _MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x09b4, 2, 0)
-#define _MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x0918, 3, 0)
-#define _MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x0924, 1, 0)
-#define _MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x09b8, 3, 0)
-#define _MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x090c, 1, 0)
-#define _MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x09bc, 3, 0)
-#define _MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x0910, 1, 0)
-#define _MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, 0x0000, 0, 0)
-#define _MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x0908, 1, 0)
-#define _MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x0938, 1, 0)
-#define _MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x099c, 2, 0)
-#define _MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, 0x0000, 0, 0)
-#define _MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, 0x0000, 0, 0)
/* The same pins as above but with the default pad control values applied */
-#define MX51_PAD_EIM_D16__AUD4_RXFS (_MX51_PAD_EIM_D16__AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__AUD5_TXD (_MX51_PAD_EIM_D16__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__EIM_D16 (_MX51_PAD_EIM_D16__EIM_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__GPIO2_0 (_MX51_PAD_EIM_D16__GPIO2_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D16__I2C1_SDA (_MX51_PAD_EIM_D16__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D16__UART2_CTS (_MX51_PAD_EIM_D16__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D16__USBH2_DATA0 (_MX51_PAD_EIM_D16__USBH2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__AUD5_RXD (_MX51_PAD_EIM_D17__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__EIM_D17 (_MX51_PAD_EIM_D17__EIM_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__GPIO2_1 (_MX51_PAD_EIM_D17__GPIO2_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D17__UART2_RXD (_MX51_PAD_EIM_D17__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D17__UART3_CTS (_MX51_PAD_EIM_D17__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D17__USBH2_DATA1 (_MX51_PAD_EIM_D17__USBH2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__AUD5_TXC (_MX51_PAD_EIM_D18__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__EIM_D18 (_MX51_PAD_EIM_D18__EIM_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__GPIO2_2 (_MX51_PAD_EIM_D18__GPIO2_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D18__UART2_TXD (_MX51_PAD_EIM_D18__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D18__UART3_RTS (_MX51_PAD_EIM_D18__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D18__USBH2_DATA2 (_MX51_PAD_EIM_D18__USBH2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__AUD4_RXC (_MX51_PAD_EIM_D19__AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__AUD5_TXFS (_MX51_PAD_EIM_D19__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__EIM_D19 (_MX51_PAD_EIM_D19__EIM_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__GPIO2_3 (_MX51_PAD_EIM_D19__GPIO2_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D19__I2C1_SCL (_MX51_PAD_EIM_D19__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D19__UART2_RTS (_MX51_PAD_EIM_D19__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D19__USBH2_DATA3 (_MX51_PAD_EIM_D19__USBH2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__AUD4_TXD (_MX51_PAD_EIM_D20__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__EIM_D20 (_MX51_PAD_EIM_D20__EIM_D20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__GPIO2_4 (_MX51_PAD_EIM_D20__GPIO2_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB (_MX51_PAD_EIM_D20__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D20__USBH2_DATA4 (_MX51_PAD_EIM_D20__USBH2_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__AUD4_RXD (_MX51_PAD_EIM_D21__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__EIM_D21 (_MX51_PAD_EIM_D21__EIM_D21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__GPIO2_5 (_MX51_PAD_EIM_D21__GPIO2_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB (_MX51_PAD_EIM_D21__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D21__USBH2_DATA5 (_MX51_PAD_EIM_D21__USBH2_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__AUD4_TXC (_MX51_PAD_EIM_D22__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__EIM_D22 (_MX51_PAD_EIM_D22__EIM_D22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__GPIO2_6 (_MX51_PAD_EIM_D22__GPIO2_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D22__USBH2_DATA6 (_MX51_PAD_EIM_D22__USBH2_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__AUD4_TXFS (_MX51_PAD_EIM_D23__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__EIM_D23 (_MX51_PAD_EIM_D23__EIM_D23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__GPIO2_7 (_MX51_PAD_EIM_D23__GPIO2_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__SPDIF_OUT1 (_MX51_PAD_EIM_D23__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D23__USBH2_DATA7 (_MX51_PAD_EIM_D23__USBH2_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__AUD6_RXFS (_MX51_PAD_EIM_D24__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__EIM_D24 (_MX51_PAD_EIM_D24__EIM_D24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__GPIO2_8 (_MX51_PAD_EIM_D24__GPIO2_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D24__I2C2_SDA (_MX51_PAD_EIM_D24__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D24__UART3_CTS (_MX51_PAD_EIM_D24__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D24__USBOTG_DATA0 (_MX51_PAD_EIM_D24__USBOTG_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D25__EIM_D25 (_MX51_PAD_EIM_D25__EIM_D25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D25__KEY_COL6 (_MX51_PAD_EIM_D25__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D25__UART2_CTS (_MX51_PAD_EIM_D25__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D25__UART3_RXD (_MX51_PAD_EIM_D25__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D25__USBOTG_DATA1 (_MX51_PAD_EIM_D25__USBOTG_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D26__EIM_D26 (_MX51_PAD_EIM_D26__EIM_D26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D26__KEY_COL7 (_MX51_PAD_EIM_D26__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D26__UART2_RTS (_MX51_PAD_EIM_D26__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D26__UART3_TXD (_MX51_PAD_EIM_D26__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D26__USBOTG_DATA2 (_MX51_PAD_EIM_D26__USBOTG_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__AUD6_RXC (_MX51_PAD_EIM_D27__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__EIM_D27 (_MX51_PAD_EIM_D27__EIM_D27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__GPIO2_9 (_MX51_PAD_EIM_D27__GPIO2_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_D27__I2C2_SCL (_MX51_PAD_EIM_D27__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_EIM_D27__UART3_RTS (_MX51_PAD_EIM_D27__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_EIM_D27__USBOTG_DATA3 (_MX51_PAD_EIM_D27__USBOTG_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__AUD6_TXD (_MX51_PAD_EIM_D28__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__EIM_D28 (_MX51_PAD_EIM_D28__EIM_D28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__KEY_ROW4 (_MX51_PAD_EIM_D28__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D28__USBOTG_DATA4 (_MX51_PAD_EIM_D28__USBOTG_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__AUD6_RXD (_MX51_PAD_EIM_D29__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__EIM_D29 (_MX51_PAD_EIM_D29__EIM_D29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__KEY_ROW5 (_MX51_PAD_EIM_D29__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D29__USBOTG_DATA5 (_MX51_PAD_EIM_D29__USBOTG_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__AUD6_TXC (_MX51_PAD_EIM_D30__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__EIM_D30 (_MX51_PAD_EIM_D30__EIM_D30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__KEY_ROW6 (_MX51_PAD_EIM_D30__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D30__USBOTG_DATA6 (_MX51_PAD_EIM_D30__USBOTG_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__AUD6_TXFS (_MX51_PAD_EIM_D31__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__EIM_D31 (_MX51_PAD_EIM_D31__EIM_D31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__KEY_ROW7 (_MX51_PAD_EIM_D31__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_D31__USBOTG_DATA7 (_MX51_PAD_EIM_D31__USBOTG_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A16__EIM_A16 (_MX51_PAD_EIM_A16__EIM_A16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A16__GPIO2_10 (_MX51_PAD_EIM_A16__GPIO2_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 (_MX51_PAD_EIM_A16__OSC_FREQ_SEL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A17__EIM_A17 (_MX51_PAD_EIM_A17__EIM_A17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A17__GPIO2_11 (_MX51_PAD_EIM_A17__GPIO2_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 (_MX51_PAD_EIM_A17__OSC_FREQ_SEL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A18__BOOT_LPB0 (_MX51_PAD_EIM_A18__BOOT_LPB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A18__EIM_A18 (_MX51_PAD_EIM_A18__EIM_A18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A18__GPIO2_12 (_MX51_PAD_EIM_A18__GPIO2_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A19__BOOT_LPB1 (_MX51_PAD_EIM_A19__BOOT_LPB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A19__EIM_A19 (_MX51_PAD_EIM_A19__EIM_A19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A19__GPIO2_13 (_MX51_PAD_EIM_A19__GPIO2_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 (_MX51_PAD_EIM_A20__BOOT_UART_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A20__EIM_A20 (_MX51_PAD_EIM_A20__EIM_A20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A20__GPIO2_14 (_MX51_PAD_EIM_A20__GPIO2_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 (_MX51_PAD_EIM_A21__BOOT_UART_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A21__EIM_A21 (_MX51_PAD_EIM_A21__EIM_A21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A21__GPIO2_15 (_MX51_PAD_EIM_A21__GPIO2_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A22__EIM_A22 (_MX51_PAD_EIM_A22__EIM_A22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A22__GPIO2_16 (_MX51_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A23__BOOT_HPN_EN (_MX51_PAD_EIM_A23__BOOT_HPN_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A23__EIM_A23 (_MX51_PAD_EIM_A23__EIM_A23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A23__GPIO2_17 (_MX51_PAD_EIM_A23__GPIO2_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A24__EIM_A24 (_MX51_PAD_EIM_A24__EIM_A24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A24__GPIO2_18 (_MX51_PAD_EIM_A24__GPIO2_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A24__USBH2_CLK (_MX51_PAD_EIM_A24__USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__DISP1_PIN4 (_MX51_PAD_EIM_A25__DISP1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__EIM_A25 (_MX51_PAD_EIM_A25__EIM_A25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__GPIO2_19 (_MX51_PAD_EIM_A25__GPIO2_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A25__USBH2_DIR (_MX51_PAD_EIM_A25__USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__CSI1_DATA_EN (_MX51_PAD_EIM_A26__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__DISP2_EXT_CLK (_MX51_PAD_EIM_A26__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__EIM_A26 (_MX51_PAD_EIM_A26__EIM_A26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__GPIO2_20 (_MX51_PAD_EIM_A26__GPIO2_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A26__USBH2_STP (_MX51_PAD_EIM_A26__USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__CSI2_DATA_EN (_MX51_PAD_EIM_A27__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__DISP1_PIN1 (_MX51_PAD_EIM_A27__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__EIM_A27 (_MX51_PAD_EIM_A27__EIM_A27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__GPIO2_21 (_MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_A27__USBH2_NXT (_MX51_PAD_EIM_A27__USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB0__EIM_EB0 (_MX51_PAD_EIM_EB0__EIM_EB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB1__EIM_EB1 (_MX51_PAD_EIM_EB1__EIM_EB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__AUD5_RXFS (_MX51_PAD_EIM_EB2__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__CSI1_D2 (_MX51_PAD_EIM_EB2__CSI1_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__EIM_EB2 (_MX51_PAD_EIM_EB2__EIM_EB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__FEC_MDIO (_MX51_PAD_EIM_EB2__FEC_MDIO | \
+#define MX51_PAD_EIM_D16__AUD4_RXFS IOMUX_PAD(0x3f0, 0x05c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__AUD5_TXD IOMUX_PAD(0x3f0, 0x05c, 7, 0x8d8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__GPIO2_0 IOMUX_PAD(0x3f0, 0x05c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D16__I2C1_SDA IOMUX_PAD(0x3f0, 0x05c, 0x14, 0x9b4, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D16__UART2_CTS IOMUX_PAD(0x3f0, 0x05c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D16__USBH2_DATA0 IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__AUD5_RXD IOMUX_PAD(0x3f4, 0x060, 7, 0x8d4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__GPIO2_1 IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D17__UART2_RXD IOMUX_PAD(0x3f4, 0x060, 3, 0x9ec, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D17__UART3_CTS IOMUX_PAD(0x3f4, 0x060, 4, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D17__USBH2_DATA1 IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__AUD5_TXC IOMUX_PAD(0x3f8, 0x064, 7, 0x8e4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__GPIO2_2 IOMUX_PAD(0x3f8, 0x064, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D18__UART2_TXD IOMUX_PAD(0x3f8, 0x064, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D18__UART3_RTS IOMUX_PAD(0x3f8, 0x064, 4, 0x9f0, 1, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D18__USBH2_DATA2 IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__AUD4_RXC IOMUX_PAD(0x3fc, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__AUD5_TXFS IOMUX_PAD(0x3fc, 0x068, 7, 0x8e8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__GPIO2_3 IOMUX_PAD(0x3fc, 0x068, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D19__I2C1_SCL IOMUX_PAD(0x3fc, 0x068, 0x14, 0x9b0, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D19__UART2_RTS IOMUX_PAD(0x3fc, 0x068, 3, 0x9e8, 1, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D19__USBH2_DATA3 IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__AUD4_TXD IOMUX_PAD(0x400, 0x06c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__EIM_D20 IOMUX_PAD(0x400, 0x06c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__GPIO2_4 IOMUX_PAD(0x400, 0x06c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB IOMUX_PAD(0x400, 0x06c, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D20__USBH2_DATA4 IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__AUD4_RXD IOMUX_PAD(0x404, 0x070, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__EIM_D21 IOMUX_PAD(0x404, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__GPIO2_5 IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB IOMUX_PAD(0x404, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__USBH2_DATA5 IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__AUD4_TXC IOMUX_PAD(0x408, 0x074, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__EIM_D22 IOMUX_PAD(0x408, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__GPIO2_6 IOMUX_PAD(0x408, 0x074, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D22__USBH2_DATA6 IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__AUD4_TXFS IOMUX_PAD(0x40c, 0x078, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__EIM_D23 IOMUX_PAD(0x40c, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__GPIO2_7 IOMUX_PAD(0x40c, 0x078, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__SPDIF_OUT1 IOMUX_PAD(0x40c, 0x078, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D23__USBH2_DATA7 IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__AUD6_RXFS IOMUX_PAD(0x410, 0x07c, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__EIM_D24 IOMUX_PAD(0x410, 0x07c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__GPIO2_8 IOMUX_PAD(0x410, 0x07c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D24__I2C2_SDA IOMUX_PAD(0x410, 0x07c, 0x14, 0x9bc, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D24__USBOTG_DATA0 IOMUX_PAD(0x410, 0x07c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__EIM_D25 IOMUX_PAD(0x414, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__KEY_COL6 IOMUX_PAD(0x414, 0x080, 1, 0x9c8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART2_CTS IOMUX_PAD(0x414, 0x080, 4, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D25__USBOTG_DATA1 IOMUX_PAD(0x414, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__EIM_D26 IOMUX_PAD(0x418, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__KEY_COL7 IOMUX_PAD(0x418, 0x084, 1, 0x9cc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART2_RTS IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D26__USBOTG_DATA2 IOMUX_PAD(0x418, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__AUD6_RXC IOMUX_PAD(0x41c, 0x088, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__EIM_D27 IOMUX_PAD(0x41c, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__GPIO2_9 IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_D27__I2C2_SCL IOMUX_PAD(0x41c, 0x088, 0x14, 0x9b8, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART_PAD_CTRL)
+#define MX51_PAD_EIM_D27__USBOTG_DATA3 IOMUX_PAD(0x41c, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__AUD6_TXD IOMUX_PAD(0x420, 0x08c, 5, 0x8f0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__KEY_ROW4 IOMUX_PAD(0x420, 0x08c, 1, 0x9d0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D28__USBOTG_DATA4 IOMUX_PAD(0x420, 0x08c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__AUD6_RXD IOMUX_PAD(0x424, 0x090, 5, 0x8ec, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__KEY_ROW5 IOMUX_PAD(0x424, 0x090, 1, 0x9d4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__USBOTG_DATA5 IOMUX_PAD(0x424, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__AUD6_TXC IOMUX_PAD(0x428, 0x094, 5, 0x8fc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__KEY_ROW6 IOMUX_PAD(0x428, 0x094, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__USBOTG_DATA6 IOMUX_PAD(0x428, 0x094, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__AUD6_TXFS IOMUX_PAD(0x42c, 0x098, 5, 0x900, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__KEY_ROW7 IOMUX_PAD(0x42c, 0x098, 1, 0x9dc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__USBOTG_DATA7 IOMUX_PAD(0x42c, 0x098, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__EIM_A16 IOMUX_PAD(0x430, 0x09c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__GPIO2_10 IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0 IOMUX_PAD(0x430, 0x09c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__GPIO2_11 IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1 IOMUX_PAD(0x434, 0x0a0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__BOOT_LPB0 IOMUX_PAD(0x438, 0x0a4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A18__GPIO2_12 IOMUX_PAD(0x438, 0x0a4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__BOOT_LPB1 IOMUX_PAD(0x43c, 0x0a8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A19__GPIO2_13 IOMUX_PAD(0x43c, 0x0a8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__BOOT_UART_SRC0 IOMUX_PAD(0x440, 0x0ac, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A20__GPIO2_14 IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__BOOT_UART_SRC1 IOMUX_PAD(0x444, 0x0b0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A21__GPIO2_15 IOMUX_PAD(0x444, 0x0b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A22__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__BOOT_HPN_EN IOMUX_PAD(0x44c, 0x0b8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A23__GPIO2_17 IOMUX_PAD(0x44c, 0x0b8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__GPIO2_18 IOMUX_PAD(0x450, 0x0bc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A24__USBH2_CLK IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__DISP1_PIN4 IOMUX_PAD(0x454, 0x0c0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__GPIO2_19 IOMUX_PAD(0x454, 0x0c0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A25__USBH2_DIR IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__CSI1_DATA_EN IOMUX_PAD(0x458, 0x0c4, 5, 0x9a0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__DISP2_EXT_CLK IOMUX_PAD(0x458, 0x0c4, 6, 0x908, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__GPIO2_20 IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A26__USBH2_STP IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__CSI2_DATA_EN IOMUX_PAD(0x45c, 0x0c8, 5, 0x99c, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__DISP1_PIN1 IOMUX_PAD(0x45c, 0x0c8, 6, 0x9a4, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__GPIO2_21 IOMUX_PAD(0x45c, 0x0c8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_A27__USBH2_NXT IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__AUD5_RXFS IOMUX_PAD(0x468, 0x0d4, 6, 0x8e0, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__CSI1_D2 IOMUX_PAD(0x468, 0x0d4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__FEC_MDIO (IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, 0) | \
MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
-#define MX51_PAD_EIM_EB2__GPIO2_22 (_MX51_PAD_EIM_EB2__GPIO2_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 (_MX51_PAD_EIM_EB2__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__AUD5_RXC (_MX51_PAD_EIM_EB3__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__CSI1_D3 (_MX51_PAD_EIM_EB3__CSI1_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__EIM_EB3 (_MX51_PAD_EIM_EB3__EIM_EB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__FEC_RDATA1 (_MX51_PAD_EIM_EB3__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__GPIO2_23 (_MX51_PAD_EIM_EB3__GPIO2_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 (_MX51_PAD_EIM_EB3__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_OE__EIM_OE (_MX51_PAD_EIM_OE__EIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_OE__GPIO2_24 (_MX51_PAD_EIM_OE__GPIO2_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS0__EIM_CS0 (_MX51_PAD_EIM_CS0__EIM_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS0__GPIO2_25 (_MX51_PAD_EIM_CS0__GPIO2_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS1__EIM_CS1 (_MX51_PAD_EIM_CS1__EIM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS1__GPIO2_26 (_MX51_PAD_EIM_CS1__GPIO2_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__AUD5_TXD (_MX51_PAD_EIM_CS2__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__CSI1_D4 (_MX51_PAD_EIM_CS2__CSI1_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__EIM_CS2 (_MX51_PAD_EIM_CS2__EIM_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__FEC_RDATA2 (_MX51_PAD_EIM_CS2__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__GPIO2_27 (_MX51_PAD_EIM_CS2__GPIO2_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS2__USBOTG_STP (_MX51_PAD_EIM_CS2__USBOTG_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__AUD5_RXD (_MX51_PAD_EIM_CS3__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__CSI1_D5 (_MX51_PAD_EIM_CS3__CSI1_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__EIM_CS3 (_MX51_PAD_EIM_CS3__EIM_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__FEC_RDATA3 (_MX51_PAD_EIM_CS3__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__GPIO2_28 (_MX51_PAD_EIM_CS3__GPIO2_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS3__USBOTG_NXT (_MX51_PAD_EIM_CS3__USBOTG_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__AUD5_TXC (_MX51_PAD_EIM_CS4__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__CSI1_D6 (_MX51_PAD_EIM_CS4__CSI1_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__EIM_CS4 (_MX51_PAD_EIM_CS4__EIM_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__FEC_RX_ER (_MX51_PAD_EIM_CS4__FEC_RX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_EIM_CS4__GPIO2_29 (_MX51_PAD_EIM_CS4__GPIO2_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS4__USBOTG_CLK (_MX51_PAD_EIM_CS4__USBOTG_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__AUD5_TXFS (_MX51_PAD_EIM_CS5__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__CSI1_D7 (_MX51_PAD_EIM_CS5__CSI1_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK (_MX51_PAD_EIM_CS5__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__EIM_CS5 (_MX51_PAD_EIM_CS5__EIM_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__FEC_CRS (_MX51_PAD_EIM_CS5__FEC_CRS | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_EIM_CS5__GPIO2_30 (_MX51_PAD_EIM_CS5__GPIO2_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CS5__USBOTG_DIR (_MX51_PAD_EIM_CS5__USBOTG_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DTACK__EIM_DTACK (_MX51_PAD_EIM_DTACK__EIM_DTACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DTACK__GPIO2_31 (_MX51_PAD_EIM_DTACK__GPIO2_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_LBA__EIM_LBA (_MX51_PAD_EIM_LBA__EIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_LBA__GPIO3_1 (_MX51_PAD_EIM_LBA__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_EIM_CRE__EIM_CRE (_MX51_PAD_EIM_CRE__EIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_CRE__GPIO3_2 (_MX51_PAD_EIM_CRE__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DRAM_CS1__DRAM_CS1 (_MX51_PAD_DRAM_CS1__DRAM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__GPIO3_3 (_MX51_PAD_NANDF_WE_B__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__NANDF_WE_B (_MX51_PAD_NANDF_WE_B__NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__PATA_DIOW (_MX51_PAD_NANDF_WE_B__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WE_B__SD3_DATA0 (_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__GPIO3_4 (_MX51_PAD_NANDF_RE_B__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__NANDF_RE_B (_MX51_PAD_NANDF_RE_B__NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__PATA_DIOR (_MX51_PAD_NANDF_RE_B__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RE_B__SD3_DATA1 (_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_ALE__GPIO3_5 (_MX51_PAD_NANDF_ALE__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_ALE__NANDF_ALE (_MX51_PAD_NANDF_ALE__NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN (_MX51_PAD_NANDF_ALE__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CLE__GPIO3_6 (_MX51_PAD_NANDF_CLE__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CLE__NANDF_CLE (_MX51_PAD_NANDF_CLE__NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CLE__PATA_RESET_B (_MX51_PAD_NANDF_CLE__PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__GPIO3_7 (_MX51_PAD_NANDF_WP_B__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__NANDF_WP_B (_MX51_PAD_NANDF_WP_B__NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__PATA_DMACK (_MX51_PAD_NANDF_WP_B__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_WP_B__SD3_DATA2 (_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 (_MX51_PAD_NANDF_RB0__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__GPIO3_8 (_MX51_PAD_NANDF_RB0__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__NANDF_RB0 (_MX51_PAD_NANDF_RB0__NANDF_RB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__PATA_DMARQ (_MX51_PAD_NANDF_RB0__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB0__SD3_DATA3 (_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__CSPI_MOSI (_MX51_PAD_NANDF_RB1__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__ECSPI2_RDY (_MX51_PAD_NANDF_RB1__ECSPI2_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__GPIO3_9 (_MX51_PAD_NANDF_RB1__GPIO3_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__NANDF_RB1 (_MX51_PAD_NANDF_RB1__NANDF_RB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__PATA_IORDY (_MX51_PAD_NANDF_RB1__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB1__SD4_CMD (_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__DISP2_WAIT (_MX51_PAD_NANDF_RB2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK (_MX51_PAD_NANDF_RB2__ECSPI2_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__FEC_COL (_MX51_PAD_NANDF_RB2__FEC_COL | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_NANDF_RB2__GPIO3_10 (_MX51_PAD_NANDF_RB2__GPIO3_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__NANDF_RB2 (_MX51_PAD_NANDF_RB2__NANDF_RB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP (_MX51_PAD_NANDF_RB2__USBH3_H3_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB2__USBH3_NXT (_MX51_PAD_NANDF_RB2__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__DISP1_WAIT (_MX51_PAD_NANDF_RB3__DISP1_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO (_MX51_PAD_NANDF_RB3__ECSPI2_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__FEC_RX_CLK (_MX51_PAD_NANDF_RB3__FEC_RX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
-#define MX51_PAD_NANDF_RB3__GPIO3_11 (_MX51_PAD_NANDF_RB3__GPIO3_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__NANDF_RB3 (_MX51_PAD_NANDF_RB3__NANDF_RB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__USBH3_CLK (_MX51_PAD_NANDF_RB3__USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM (_MX51_PAD_NANDF_RB3__USBH3_H3_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO_NAND__GPIO_NAND (_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_GPIO_NAND__PATA_INTRQ (_MX51_PAD_GPIO_NAND__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS0__GPIO3_16 (_MX51_PAD_NANDF_CS0__GPIO3_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS0__NANDF_CS0 (_MX51_PAD_NANDF_CS0__NANDF_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS1__GPIO3_17 (_MX51_PAD_NANDF_CS1__GPIO3_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS1__NANDF_CS1 (_MX51_PAD_NANDF_CS1__NANDF_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__CSPI_SCLK (_MX51_PAD_NANDF_CS2__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER (_MX51_PAD_NANDF_CS2__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS2__GPIO3_18 (_MX51_PAD_NANDF_CS2__GPIO3_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__NANDF_CS2 (_MX51_PAD_NANDF_CS2__NANDF_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__PATA_CS_0 (_MX51_PAD_NANDF_CS2__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS2__SD4_CLK (_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP (_MX51_PAD_NANDF_CS2__USBH3_H1_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__FEC_MDC (_MX51_PAD_NANDF_CS3__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS3__GPIO3_19 (_MX51_PAD_NANDF_CS3__GPIO3_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__NANDF_CS3 (_MX51_PAD_NANDF_CS3__NANDF_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__PATA_CS_1 (_MX51_PAD_NANDF_CS3__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__SD4_DAT0 (_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM (_MX51_PAD_NANDF_CS3__USBH3_H1_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__FEC_TDATA1 (_MX51_PAD_NANDF_CS4__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS4__GPIO3_20 (_MX51_PAD_NANDF_CS4__GPIO3_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__NANDF_CS4 (_MX51_PAD_NANDF_CS4__NANDF_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__PATA_DA_0 (_MX51_PAD_NANDF_CS4__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__SD4_DAT1 (_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS4__USBH3_STP (_MX51_PAD_NANDF_CS4__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__FEC_TDATA2 (_MX51_PAD_NANDF_CS5__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS5__GPIO3_21 (_MX51_PAD_NANDF_CS5__GPIO3_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__NANDF_CS5 (_MX51_PAD_NANDF_CS5__NANDF_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__PATA_DA_1 (_MX51_PAD_NANDF_CS5__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__SD4_DAT2 (_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS5__USBH3_DIR (_MX51_PAD_NANDF_CS5__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__CSPI_SS3 (_MX51_PAD_NANDF_CS6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__FEC_TDATA3 (_MX51_PAD_NANDF_CS6__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS6__GPIO3_22 (_MX51_PAD_NANDF_CS6__GPIO3_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__NANDF_CS6 (_MX51_PAD_NANDF_CS6__NANDF_CS6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__PATA_DA_2 (_MX51_PAD_NANDF_CS6__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS6__SD4_DAT3 (_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN (_MX51_PAD_NANDF_CS7__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_CS7__GPIO3_23 (_MX51_PAD_NANDF_CS7__GPIO3_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS7__NANDF_CS7 (_MX51_PAD_NANDF_CS7__NANDF_CS7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_CS7__SD3_CLK (_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 (_MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK (_MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 (_MX51_PAD_NANDF_RDY_INT__GPIO3_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT (_MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD (_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI (_MX51_PAD_NANDF_D15__ECSPI2_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__GPIO3_25 (_MX51_PAD_NANDF_D15__GPIO3_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__NANDF_D15 (_MX51_PAD_NANDF_D15__NANDF_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__PATA_DATA15 (_MX51_PAD_NANDF_D15__PATA_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D15__SD3_DAT7 (_MX51_PAD_NANDF_D15__SD3_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__ECSPI2_SS3 (_MX51_PAD_NANDF_D14__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__GPIO3_26 (_MX51_PAD_NANDF_D14__GPIO3_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__NANDF_D14 (_MX51_PAD_NANDF_D14__NANDF_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__PATA_DATA14 (_MX51_PAD_NANDF_D14__PATA_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D14__SD3_DAT6 (_MX51_PAD_NANDF_D14__SD3_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__ECSPI2_SS2 (_MX51_PAD_NANDF_D13__ECSPI2_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__GPIO3_27 (_MX51_PAD_NANDF_D13__GPIO3_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__NANDF_D13 (_MX51_PAD_NANDF_D13__NANDF_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__PATA_DATA13 (_MX51_PAD_NANDF_D13__PATA_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D13__SD3_DAT5 (_MX51_PAD_NANDF_D13__SD3_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__ECSPI2_SS1 (_MX51_PAD_NANDF_D12__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__GPIO3_28 (_MX51_PAD_NANDF_D12__GPIO3_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__NANDF_D12 (_MX51_PAD_NANDF_D12__NANDF_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__PATA_DATA12 (_MX51_PAD_NANDF_D12__PATA_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D12__SD3_DAT4 (_MX51_PAD_NANDF_D12__SD3_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__FEC_RX_DV (_MX51_PAD_NANDF_D11__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__GPIO3_29 (_MX51_PAD_NANDF_D11__GPIO3_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__NANDF_D11 (_MX51_PAD_NANDF_D11__NANDF_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__PATA_DATA11 (_MX51_PAD_NANDF_D11__PATA_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D11__SD3_DATA3 (_MX51_PAD_NANDF_D11__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__GPIO3_30 (_MX51_PAD_NANDF_D10__GPIO3_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__NANDF_D10 (_MX51_PAD_NANDF_D10__NANDF_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__PATA_DATA10 (_MX51_PAD_NANDF_D10__PATA_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D10__SD3_DATA2 (_MX51_PAD_NANDF_D10__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__FEC_RDATA0 (_MX51_PAD_NANDF_D9__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_NANDF_D9__GPIO3_31 (_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__NANDF_D9 (_MX51_PAD_NANDF_D9__NANDF_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__PATA_DATA9 (_MX51_PAD_NANDF_D9__PATA_DATA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D9__SD3_DATA1 (_MX51_PAD_NANDF_D9__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__FEC_TDATA0 (_MX51_PAD_NANDF_D8__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_NANDF_D8__GPIO4_0 (_MX51_PAD_NANDF_D8__GPIO4_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__NANDF_D8 (_MX51_PAD_NANDF_D8__NANDF_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__PATA_DATA8 (_MX51_PAD_NANDF_D8__PATA_DATA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D8__SD3_DATA0 (_MX51_PAD_NANDF_D8__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__GPIO4_1 (_MX51_PAD_NANDF_D7__GPIO4_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__NANDF_D7 (_MX51_PAD_NANDF_D7__NANDF_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__PATA_DATA7 (_MX51_PAD_NANDF_D7__PATA_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D7__USBH3_DATA0 (_MX51_PAD_NANDF_D7__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__GPIO4_2 (_MX51_PAD_NANDF_D6__GPIO4_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__NANDF_D6 (_MX51_PAD_NANDF_D6__NANDF_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__PATA_DATA6 (_MX51_PAD_NANDF_D6__PATA_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__SD4_LCTL (_MX51_PAD_NANDF_D6__SD4_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D6__USBH3_DATA1 (_MX51_PAD_NANDF_D6__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__GPIO4_3 (_MX51_PAD_NANDF_D5__GPIO4_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__NANDF_D5 (_MX51_PAD_NANDF_D5__NANDF_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__PATA_DATA5 (_MX51_PAD_NANDF_D5__PATA_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__SD4_WP (_MX51_PAD_NANDF_D5__SD4_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D5__USBH3_DATA2 (_MX51_PAD_NANDF_D5__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__GPIO4_4 (_MX51_PAD_NANDF_D4__GPIO4_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__NANDF_D4 (_MX51_PAD_NANDF_D4__NANDF_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__PATA_DATA4 (_MX51_PAD_NANDF_D4__PATA_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__SD4_CD (_MX51_PAD_NANDF_D4__SD4_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D4__USBH3_DATA3 (_MX51_PAD_NANDF_D4__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__GPIO4_5 (_MX51_PAD_NANDF_D3__GPIO4_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__NANDF_D3 (_MX51_PAD_NANDF_D3__NANDF_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__PATA_DATA3 (_MX51_PAD_NANDF_D3__PATA_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__SD4_DAT4 (_MX51_PAD_NANDF_D3__SD4_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D3__USBH3_DATA4 (_MX51_PAD_NANDF_D3__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__GPIO4_6 (_MX51_PAD_NANDF_D2__GPIO4_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__NANDF_D2 (_MX51_PAD_NANDF_D2__NANDF_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__PATA_DATA2 (_MX51_PAD_NANDF_D2__PATA_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__SD4_DAT5 (_MX51_PAD_NANDF_D2__SD4_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D2__USBH3_DATA5 (_MX51_PAD_NANDF_D2__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__GPIO4_7 (_MX51_PAD_NANDF_D1__GPIO4_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__NANDF_D1 (_MX51_PAD_NANDF_D1__NANDF_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__PATA_DATA1 (_MX51_PAD_NANDF_D1__PATA_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__SD4_DAT6 (_MX51_PAD_NANDF_D1__SD4_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D1__USBH3_DATA6 (_MX51_PAD_NANDF_D1__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__GPIO4_8 (_MX51_PAD_NANDF_D0__GPIO4_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__NANDF_D0 (_MX51_PAD_NANDF_D0__NANDF_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__PATA_DATA0 (_MX51_PAD_NANDF_D0__PATA_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__SD4_DAT7 (_MX51_PAD_NANDF_D0__SD4_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_NANDF_D0__USBH3_DATA7 (_MX51_PAD_NANDF_D0__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D8__CSI1_D8 (_MX51_PAD_CSI1_D8__CSI1_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D8__GPIO3_12 (_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_D9__CSI1_D9 (_MX51_PAD_CSI1_D9__CSI1_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D9__GPIO3_13 (_MX51_PAD_CSI1_D9__GPIO3_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_D10__CSI1_D10 (_MX51_PAD_CSI1_D10__CSI1_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D11__CSI1_D11 (_MX51_PAD_CSI1_D11__CSI1_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D12__CSI1_D12 (_MX51_PAD_CSI1_D12__CSI1_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D13__CSI1_D13 (_MX51_PAD_CSI1_D13__CSI1_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D14__CSI1_D14 (_MX51_PAD_CSI1_D14__CSI1_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D15__CSI1_D15 (_MX51_PAD_CSI1_D15__CSI1_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D16__CSI1_D16 (_MX51_PAD_CSI1_D16__CSI1_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D17__CSI1_D17 (_MX51_PAD_CSI1_D17__CSI1_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D18__CSI1_D18 (_MX51_PAD_CSI1_D18__CSI1_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_D19__CSI1_D19 (_MX51_PAD_CSI1_D19__CSI1_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC (_MX51_PAD_CSI1_VSYNC__CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_VSYNC__GPIO3_14 (_MX51_PAD_CSI1_VSYNC__GPIO3_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC (_MX51_PAD_CSI1_HSYNC__CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_HSYNC__GPIO3_15 (_MX51_PAD_CSI1_HSYNC__GPIO3_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK (_MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK (_MX51_PAD_CSI1_MCLK__CSI1_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D12__CSI2_D12 (_MX51_PAD_CSI2_D12__CSI2_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D12__GPIO4_9 (_MX51_PAD_CSI2_D12__GPIO4_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_D13__CSI2_D13 (_MX51_PAD_CSI2_D13__CSI2_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D13__GPIO4_10 (_MX51_PAD_CSI2_D13__GPIO4_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_D14__CSI2_D14 (_MX51_PAD_CSI2_D14__CSI2_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D15__CSI2_D15 (_MX51_PAD_CSI2_D15__CSI2_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D16__CSI2_D16 (_MX51_PAD_CSI2_D16__CSI2_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D17__CSI2_D17 (_MX51_PAD_CSI2_D17__CSI2_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D18__CSI2_D18 (_MX51_PAD_CSI2_D18__CSI2_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D18__GPIO4_11 (_MX51_PAD_CSI2_D18__GPIO4_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_D19__CSI2_D19 (_MX51_PAD_CSI2_D19__CSI2_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_D19__GPIO4_12 (_MX51_PAD_CSI2_D19__GPIO4_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC (_MX51_PAD_CSI2_VSYNC__CSI2_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_VSYNC__GPIO4_13 (_MX51_PAD_CSI2_VSYNC__GPIO4_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC (_MX51_PAD_CSI2_HSYNC__CSI2_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_HSYNC__GPIO4_14 (_MX51_PAD_CSI2_HSYNC__GPIO4_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK (_MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 (_MX51_PAD_CSI2_PIXCLK__GPIO4_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_I2C1_CLK__GPIO4_16 (_MX51_PAD_I2C1_CLK__GPIO4_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_I2C1_CLK__I2C1_CLK (_MX51_PAD_I2C1_CLK__I2C1_CLK | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_I2C1_DAT__GPIO4_17 (_MX51_PAD_I2C1_DAT__GPIO4_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_I2C1_DAT__I2C1_DAT (_MX51_PAD_I2C1_DAT__I2C1_DAT | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD (_MX51_PAD_AUD3_BB_TXD__AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 (_MX51_PAD_AUD3_BB_TXD__GPIO4_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD (_MX51_PAD_AUD3_BB_RXD__AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 (_MX51_PAD_AUD3_BB_RXD__GPIO4_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_RXD__UART3_RXD (_MX51_PAD_AUD3_BB_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_CK__AUD3_TXC (_MX51_PAD_AUD3_BB_CK__AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_CK__GPIO4_20 (_MX51_PAD_AUD3_BB_CK__GPIO4_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS (_MX51_PAD_AUD3_BB_FS__AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_FS__GPIO4_21 (_MX51_PAD_AUD3_BB_FS__GPIO4_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_AUD3_BB_FS__UART3_TXD (_MX51_PAD_AUD3_BB_FS__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI (_MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_MOSI__GPIO4_22 (_MX51_PAD_CSPI1_MOSI__GPIO4_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_MOSI__I2C1_SDA (_MX51_PAD_CSPI1_MOSI__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_CSPI1_MISO__AUD4_RXD (_MX51_PAD_CSPI1_MISO__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO (_MX51_PAD_CSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_MISO__GPIO4_23 (_MX51_PAD_CSPI1_MISO__GPIO4_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS0__AUD4_TXC (_MX51_PAD_CSPI1_SS0__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 (_MX51_PAD_CSPI1_SS0__ECSPI1_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS0__GPIO4_24 (_MX51_PAD_CSPI1_SS0__GPIO4_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS1__AUD4_TXD (_MX51_PAD_CSPI1_SS1__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 (_MX51_PAD_CSPI1_SS1__ECSPI1_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_SS1__GPIO4_25 (_MX51_PAD_CSPI1_SS1__GPIO4_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_RDY__AUD4_TXFS (_MX51_PAD_CSPI1_RDY__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY (_MX51_PAD_CSPI1_RDY__ECSPI1_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_RDY__GPIO4_26 (_MX51_PAD_CSPI1_RDY__GPIO4_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK (_MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_CSPI1_SCLK__GPIO4_27 (_MX51_PAD_CSPI1_SCLK__GPIO4_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_CSPI1_SCLK__I2C1_SCL (_MX51_PAD_CSPI1_SCLK__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_UART1_RXD__GPIO4_28 (_MX51_PAD_UART1_RXD__GPIO4_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_RXD__UART1_RXD (_MX51_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART1_TXD__GPIO4_29 (_MX51_PAD_UART1_TXD__GPIO4_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_TXD__PWM2_PWMO (_MX51_PAD_UART1_TXD__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART1_TXD__UART1_TXD (_MX51_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART1_RTS__GPIO4_30 (_MX51_PAD_UART1_RTS__GPIO4_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_RTS__UART1_RTS (_MX51_PAD_UART1_RTS__UART1_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART1_CTS__GPIO4_31 (_MX51_PAD_UART1_CTS__GPIO4_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART1_CTS__UART1_CTS (_MX51_PAD_UART1_CTS__UART1_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART2_RXD__FIRI_TXD (_MX51_PAD_UART2_RXD__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART2_RXD__GPIO1_20 (_MX51_PAD_UART2_RXD__GPIO1_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART2_RXD__UART2_RXD (_MX51_PAD_UART2_RXD__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART2_TXD__FIRI_RXD (_MX51_PAD_UART2_TXD__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART2_TXD__GPIO1_21 (_MX51_PAD_UART2_TXD__GPIO1_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART2_TXD__UART2_TXD (_MX51_PAD_UART2_TXD__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__CSI1_D0 (_MX51_PAD_UART3_RXD__CSI1_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__GPIO1_22 (_MX51_PAD_UART3_RXD__GPIO1_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__UART1_DTR (_MX51_PAD_UART3_RXD__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART3_RXD__UART3_RXD (_MX51_PAD_UART3_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__CSI1_D1 (_MX51_PAD_UART3_TXD__CSI1_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__GPIO1_23 (_MX51_PAD_UART3_TXD__GPIO1_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__UART1_DSR (_MX51_PAD_UART3_TXD__UART1_DSR | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_UART3_TXD__UART3_TXD (_MX51_PAD_UART3_TXD__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_OWIRE_LINE__GPIO1_24 (_MX51_PAD_OWIRE_LINE__GPIO1_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_OWIRE_LINE__OWIRE_LINE (_MX51_PAD_OWIRE_LINE__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_OWIRE_LINE__SPDIF_OUT (_MX51_PAD_OWIRE_LINE__SPDIF_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW0__KEY_ROW0 (_MX51_PAD_KEY_ROW0__KEY_ROW0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW1__KEY_ROW1 (_MX51_PAD_KEY_ROW1__KEY_ROW1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW2__KEY_ROW2 (_MX51_PAD_KEY_ROW2__KEY_ROW2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_ROW3__KEY_ROW3 (_MX51_PAD_KEY_ROW3__KEY_ROW3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL0__KEY_COL0 (_MX51_PAD_KEY_COL0__KEY_COL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL0__PLL1_BYP (_MX51_PAD_KEY_COL0__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL1__KEY_COL1 (_MX51_PAD_KEY_COL1__KEY_COL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL1__PLL2_BYP (_MX51_PAD_KEY_COL1__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL2__KEY_COL2 (_MX51_PAD_KEY_COL2__KEY_COL2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL2__PLL3_BYP (_MX51_PAD_KEY_COL2__PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL3__KEY_COL3 (_MX51_PAD_KEY_COL3__KEY_COL3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__I2C2_SCL (_MX51_PAD_KEY_COL4__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__KEY_COL4 (_MX51_PAD_KEY_COL4__KEY_COL4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__SPDIF_OUT1 (_MX51_PAD_KEY_COL4__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__UART1_RI (_MX51_PAD_KEY_COL4__UART1_RI | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_KEY_COL4__UART3_RTS (_MX51_PAD_KEY_COL4__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__I2C2_SDA (_MX51_PAD_KEY_COL5__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__KEY_COL5 (_MX51_PAD_KEY_COL5__KEY_COL5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__UART1_DCD (_MX51_PAD_KEY_COL5__UART1_DCD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_KEY_COL5__UART3_CTS (_MX51_PAD_KEY_COL5__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__CSPI_SCLK (_MX51_PAD_USBH1_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__GPIO1_25 (_MX51_PAD_USBH1_CLK__GPIO1_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__I2C2_SCL (_MX51_PAD_USBH1_CLK__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_USBH1_CLK__USBH1_CLK (_MX51_PAD_USBH1_CLK__USBH1_CLK | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__CSPI_MOSI (_MX51_PAD_USBH1_DIR__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__GPIO1_26 (_MX51_PAD_USBH1_DIR__GPIO1_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__I2C2_SDA (_MX51_PAD_USBH1_DIR__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_USBH1_DIR__USBH1_DIR (_MX51_PAD_USBH1_DIR__USBH1_DIR | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__CSPI_RDY (_MX51_PAD_USBH1_STP__CSPI_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__GPIO1_27 (_MX51_PAD_USBH1_STP__GPIO1_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__UART3_RXD (_MX51_PAD_USBH1_STP__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_STP__USBH1_STP (_MX51_PAD_USBH1_STP__USBH1_STP | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__CSPI_MISO (_MX51_PAD_USBH1_NXT__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__GPIO1_28 (_MX51_PAD_USBH1_NXT__GPIO1_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__UART3_TXD (_MX51_PAD_USBH1_NXT__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_NXT__USBH1_NXT (_MX51_PAD_USBH1_NXT__USBH1_NXT | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA0__GPIO1_11 (_MX51_PAD_USBH1_DATA0__GPIO1_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA0__UART2_CTS (_MX51_PAD_USBH1_DATA0__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 (_MX51_PAD_USBH1_DATA0__USBH1_DATA0 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA1__GPIO1_12 (_MX51_PAD_USBH1_DATA1__GPIO1_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA1__UART2_RXD (_MX51_PAD_USBH1_DATA1__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 (_MX51_PAD_USBH1_DATA1__USBH1_DATA1 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA2__GPIO1_13 (_MX51_PAD_USBH1_DATA2__GPIO1_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA2__UART2_TXD (_MX51_PAD_USBH1_DATA2__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 (_MX51_PAD_USBH1_DATA2__USBH1_DATA2 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA3__GPIO1_14 (_MX51_PAD_USBH1_DATA3__GPIO1_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA3__UART2_RTS (_MX51_PAD_USBH1_DATA3__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 (_MX51_PAD_USBH1_DATA3__USBH1_DATA3 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA4__CSPI_SS0 (_MX51_PAD_USBH1_DATA4__CSPI_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA4__GPIO1_15 (_MX51_PAD_USBH1_DATA4__GPIO1_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 (_MX51_PAD_USBH1_DATA4__USBH1_DATA4 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA5__CSPI_SS1 (_MX51_PAD_USBH1_DATA5__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA5__GPIO1_16 (_MX51_PAD_USBH1_DATA5__GPIO1_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 (_MX51_PAD_USBH1_DATA5__USBH1_DATA5 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA6__CSPI_SS3 (_MX51_PAD_USBH1_DATA6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA6__GPIO1_17 (_MX51_PAD_USBH1_DATA6__GPIO1_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 (_MX51_PAD_USBH1_DATA6__USBH1_DATA6 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI1_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 (_MX51_PAD_USBH1_DATA7__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__GPIO1_18 (_MX51_PAD_USBH1_DATA7__GPIO1_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 (_MX51_PAD_USBH1_DATA7__USBH1_DATA7 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
-#define MX51_PAD_DI1_PIN11__DI1_PIN11 (_MX51_PAD_DI1_PIN11__DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 (_MX51_PAD_DI1_PIN11__ECSPI1_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_DI1_PIN11__GPIO3_0 (_MX51_PAD_DI1_PIN11__GPIO3_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN12__DI1_PIN12 (_MX51_PAD_DI1_PIN12__DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN12__GPIO3_1 (_MX51_PAD_DI1_PIN12__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN13__DI1_PIN13 (_MX51_PAD_DI1_PIN13__DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN13__GPIO3_2 (_MX51_PAD_DI1_PIN13__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_D0_CS__DI1_D0_CS (_MX51_PAD_DI1_D0_CS__DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D0_CS__GPIO3_3 (_MX51_PAD_DI1_D0_CS__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__DI1_D1_CS (_MX51_PAD_DI1_D1_CS__DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 (_MX51_PAD_DI1_D1_CS__DISP1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 (_MX51_PAD_DI1_D1_CS__DISP1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_D1_CS__GPIO3_4 (_MX51_PAD_DI1_D1_CS__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 (_MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN (_MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 (_MX51_PAD_DISPB2_SER_DIN__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 (_MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO (_MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 (_MX51_PAD_DISPB2_SER_DIO__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 (_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK (_MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 (_MX51_PAD_DISPB2_SER_CLK__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK (_MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 (_MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS (_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 (_MX51_PAD_DISPB2_SER_RS__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 (_MX51_PAD_DISP1_DAT0__DISP1_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 (_MX51_PAD_DISP1_DAT1__DISP1_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 (_MX51_PAD_DISP1_DAT2__DISP1_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 (_MX51_PAD_DISP1_DAT3__DISP1_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 (_MX51_PAD_DISP1_DAT4__DISP1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 (_MX51_PAD_DISP1_DAT5__DISP1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC (_MX51_PAD_DISP1_DAT6__BOOT_USB_SRC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 (_MX51_PAD_DISP1_DAT6__DISP1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG (_MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 (_MX51_PAD_DISP1_DAT7__DISP1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 (_MX51_PAD_DISP1_DAT8__BOOT_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 (_MX51_PAD_DISP1_DAT8__DISP1_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 (_MX51_PAD_DISP1_DAT9__BOOT_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 (_MX51_PAD_DISP1_DAT9__DISP1_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE (_MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 (_MX51_PAD_DISP1_DAT10__DISP1_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 (_MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 (_MX51_PAD_DISP1_DAT11__DISP1_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL (_MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 (_MX51_PAD_DISP1_DAT12__DISP1_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 (_MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 (_MX51_PAD_DISP1_DAT13__DISP1_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 (_MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 (_MX51_PAD_DISP1_DAT14__DISP1_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH (_MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 (_MX51_PAD_DISP1_DAT15__DISP1_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 (_MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 (_MX51_PAD_DISP1_DAT16__DISP1_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 (_MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 (_MX51_PAD_DISP1_DAT17__DISP1_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 (_MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 (_MX51_PAD_DISP1_DAT18__DISP1_DAT18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 (_MX51_PAD_DISP1_DAT18__DISP2_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 (_MX51_PAD_DISP1_DAT18__DISP2_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 (_MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 (_MX51_PAD_DISP1_DAT19__DISP1_DAT19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 (_MX51_PAD_DISP1_DAT19__DISP2_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 (_MX51_PAD_DISP1_DAT19__DISP2_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 (_MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 (_MX51_PAD_DISP1_DAT20__DISP1_DAT20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 (_MX51_PAD_DISP1_DAT20__DISP2_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 (_MX51_PAD_DISP1_DAT20__DISP2_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 (_MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 (_MX51_PAD_DISP1_DAT21__DISP1_DAT21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 (_MX51_PAD_DISP1_DAT21__DISP2_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 (_MX51_PAD_DISP1_DAT21__DISP2_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 (_MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 (_MX51_PAD_DISP1_DAT22__DISP1_DAT22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS (_MX51_PAD_DISP1_DAT22__DISP2_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 (_MX51_PAD_DISP1_DAT22__DISP2_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 (_MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 (_MX51_PAD_DISP1_DAT23__DISP1_DAT23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS (_MX51_PAD_DISP1_DAT23__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 (_MX51_PAD_DISP1_DAT23__DISP2_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS (_MX51_PAD_DISP1_DAT23__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN3__DI1_PIN3 (_MX51_PAD_DI1_PIN3__DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI1_PIN2__DI1_PIN2 (_MX51_PAD_DI1_PIN2__DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP2__DISP1_SER_CLK (_MX51_PAD_DI_GP2__DISP1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP2__DISP2_WAIT (_MX51_PAD_DI_GP2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP3__CSI1_DATA_EN (_MX51_PAD_DI_GP3__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP3__DISP1_SER_DIO (_MX51_PAD_DI_GP3__DISP1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP3__FEC_TX_ER (_MX51_PAD_DI_GP3__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN (_MX51_PAD_DI2_PIN4__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN4__DI2_PIN4 (_MX51_PAD_DI2_PIN4__DI2_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN4__FEC_CRS (_MX51_PAD_DI2_PIN4__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN2__DI2_PIN2 (_MX51_PAD_DI2_PIN2__DI2_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN2__FEC_MDC (_MX51_PAD_DI2_PIN2__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DI2_PIN3__DI2_PIN3 (_MX51_PAD_DI2_PIN3__DI2_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_PIN3__FEC_MDIO (_MX51_PAD_DI2_PIN3__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK (_MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 (_MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__DI2_PIN15 (_MX51_PAD_DI_GP4__DI2_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__DISP1_SER_DIN (_MX51_PAD_DI_GP4__DISP1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__DISP2_PIN1 (_MX51_PAD_DI_GP4__DISP2_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DI_GP4__FEC_RDATA2 (_MX51_PAD_DI_GP4__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 (_MX51_PAD_DISP2_DAT0__DISP2_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 (_MX51_PAD_DISP2_DAT0__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__KEY_COL6 (_MX51_PAD_DISP2_DAT0__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__UART3_RXD (_MX51_PAD_DISP2_DAT0__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT0__USBH3_CLK (_MX51_PAD_DISP2_DAT0__USBH3_CLK | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 (_MX51_PAD_DISP2_DAT1__DISP2_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__FEC_RX_ER (_MX51_PAD_DISP2_DAT1__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__KEY_COL7 (_MX51_PAD_DISP2_DAT1__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__UART3_TXD (_MX51_PAD_DISP2_DAT1__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT1__USBH3_DIR (_MX51_PAD_DISP2_DAT1__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 (_MX51_PAD_DISP2_DAT2__DISP2_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 (_MX51_PAD_DISP2_DAT3__DISP2_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 (_MX51_PAD_DISP2_DAT4__DISP2_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 (_MX51_PAD_DISP2_DAT5__DISP2_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 (_MX51_PAD_DISP2_DAT6__DISP2_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 (_MX51_PAD_DISP2_DAT6__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT6__GPIO1_19 (_MX51_PAD_DISP2_DAT6__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__KEY_ROW4 (_MX51_PAD_DISP2_DAT6__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT6__USBH3_STP (_MX51_PAD_DISP2_DAT6__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 (_MX51_PAD_DISP2_DAT7__DISP2_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 (_MX51_PAD_DISP2_DAT7__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT7__GPIO1_29 (_MX51_PAD_DISP2_DAT7__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__KEY_ROW5 (_MX51_PAD_DISP2_DAT7__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT7__USBH3_NXT (_MX51_PAD_DISP2_DAT7__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 (_MX51_PAD_DISP2_DAT8__DISP2_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 (_MX51_PAD_DISP2_DAT8__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT8__GPIO1_30 (_MX51_PAD_DISP2_DAT8__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__KEY_ROW6 (_MX51_PAD_DISP2_DAT8__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 (_MX51_PAD_DISP2_DAT8__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__AUD6_RXC (_MX51_PAD_DISP2_DAT9__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 (_MX51_PAD_DISP2_DAT9__DISP2_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__FEC_TX_EN (_MX51_PAD_DISP2_DAT9__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT9__GPIO1_31 (_MX51_PAD_DISP2_DAT9__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 (_MX51_PAD_DISP2_DAT9__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 (_MX51_PAD_DISP2_DAT10__DISP2_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS (_MX51_PAD_DISP2_DAT10__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__FEC_COL (_MX51_PAD_DISP2_DAT10__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__KEY_ROW7 (_MX51_PAD_DISP2_DAT10__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 (_MX51_PAD_DISP2_DAT10__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__AUD6_TXD (_MX51_PAD_DISP2_DAT11__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 (_MX51_PAD_DISP2_DAT11__DISP2_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK (_MX51_PAD_DISP2_DAT11__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__GPIO1_10 (_MX51_PAD_DISP2_DAT11__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 (_MX51_PAD_DISP2_DAT11__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__AUD6_RXD (_MX51_PAD_DISP2_DAT12__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 (_MX51_PAD_DISP2_DAT12__DISP2_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__FEC_RX_DV (_MX51_PAD_DISP2_DAT12__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 (_MX51_PAD_DISP2_DAT12__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT13__AUD6_TXC (_MX51_PAD_DISP2_DAT13__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 (_MX51_PAD_DISP2_DAT13__DISP2_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK (_MX51_PAD_DISP2_DAT13__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 (_MX51_PAD_DISP2_DAT13__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT14__AUD6_TXFS (_MX51_PAD_DISP2_DAT14__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 (_MX51_PAD_DISP2_DAT14__DISP2_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 (_MX51_PAD_DISP2_DAT14__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
-#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 (_MX51_PAD_DISP2_DAT14__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__AUD6_RXFS (_MX51_PAD_DISP2_DAT15__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS (_MX51_PAD_DISP2_DAT15__DISP1_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 (_MX51_PAD_DISP2_DAT15__DISP2_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 (_MX51_PAD_DISP2_DAT15__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
-#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 (_MX51_PAD_DISP2_DAT15__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CMD__AUD5_RXFS (_MX51_PAD_SD1_CMD__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CMD__CSPI_MOSI (_MX51_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CMD__SD1_CMD (_MX51_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD1_CLK__AUD5_RXC (_MX51_PAD_SD1_CLK__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CLK__CSPI_SCLK (_MX51_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_CLK__SD1_CLK (_MX51_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_SD1_DATA0__AUD5_TXD (_MX51_PAD_SD1_DATA0__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA0__CSPI_MISO (_MX51_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD1_DATA0__SD1_DATA0 (_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_EIM_DA0__EIM_DA0 (_MX51_PAD_EIM_DA0__EIM_DA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA1__EIM_DA1 (_MX51_PAD_EIM_DA1__EIM_DA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA2__EIM_DA2 (_MX51_PAD_EIM_DA2__EIM_DA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA3__EIM_DA3 (_MX51_PAD_EIM_DA3__EIM_DA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA1__AUD5_RXD (_MX51_PAD_SD1_DATA1__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA1__SD1_DATA1 (_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_EIM_DA4__EIM_DA4 (_MX51_PAD_EIM_DA4__EIM_DA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA5__EIM_DA5 (_MX51_PAD_EIM_DA5__EIM_DA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA6__EIM_DA6 (_MX51_PAD_EIM_DA6__EIM_DA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA7__EIM_DA7 (_MX51_PAD_EIM_DA7__EIM_DA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA2__AUD5_TXC (_MX51_PAD_SD1_DATA2__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA2__SD1_DATA2 (_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_EIM_DA10__EIM_DA10 (_MX51_PAD_EIM_DA10__EIM_DA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA11__EIM_DA11 (_MX51_PAD_EIM_DA11__EIM_DA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA8__EIM_DA8 (_MX51_PAD_EIM_DA8__EIM_DA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA9__EIM_DA9 (_MX51_PAD_EIM_DA9__EIM_DA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS (_MX51_PAD_SD1_DATA3__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD1_DATA3__CSPI_SS1 (_MX51_PAD_SD1_DATA3__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD1_DATA3__SD1_DATA3 (_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_GPIO1_0__CSPI_SS2 (_MX51_PAD_GPIO1_0__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_GPIO1_0__GPIO1_0 (_MX51_PAD_GPIO1_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_0__SD1_CD (_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_GPIO1_1__CSPI_MISO (_MX51_PAD_GPIO1_1__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_GPIO1_1__GPIO1_1 (_MX51_PAD_GPIO1_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_1__SD1_WP (_MX51_PAD_GPIO1_1__SD1_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_EIM_DA12__EIM_DA12 (_MX51_PAD_EIM_DA12__EIM_DA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA13__EIM_DA13 (_MX51_PAD_EIM_DA13__EIM_DA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA14__EIM_DA14 (_MX51_PAD_EIM_DA14__EIM_DA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_EIM_DA15__EIM_DA15 (_MX51_PAD_EIM_DA15__EIM_DA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_CMD__CSPI_MOSI (_MX51_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_CMD__I2C1_SCL (_MX51_PAD_SD2_CMD__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_SD2_CMD__SD2_CMD (_MX51_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_CLK__CSPI_SCLK (_MX51_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_CLK__I2C1_SDA (_MX51_PAD_SD2_CLK__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_SD2_CLK__SD2_CLK (_MX51_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
-#define MX51_PAD_SD2_DATA0__CSPI_MISO (_MX51_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA0__SD1_DAT4 (_MX51_PAD_SD2_DATA0__SD1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA0__SD2_DATA0 (_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA1__SD1_DAT5 (_MX51_PAD_SD2_DATA1__SD1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA1__SD2_DATA1 (_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP (_MX51_PAD_SD2_DATA1__USBH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA2__SD1_DAT6 (_MX51_PAD_SD2_DATA2__SD1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA2__SD2_DATA2 (_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM (_MX51_PAD_SD2_DATA2__USBH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA3__CSPI_SS2 (_MX51_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
-#define MX51_PAD_SD2_DATA3__SD1_DAT7 (_MX51_PAD_SD2_DATA3__SD1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_SD2_DATA3__SD2_DATA3 (_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__CCM_OUT_2 (_MX51_PAD_GPIO1_2__CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__GPIO1_2 (_MX51_PAD_GPIO1_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__I2C2_SCL (_MX51_PAD_GPIO1_2__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__PLL1_BYP (_MX51_PAD_GPIO1_2__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_2__PWM1_PWMO (_MX51_PAD_GPIO1_2__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__GPIO1_3 (_MX51_PAD_GPIO1_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__I2C2_SDA (_MX51_PAD_GPIO1_3__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__PLL2_BYP (_MX51_PAD_GPIO1_3__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_3__PWM2_PWMO (_MX51_PAD_GPIO1_3__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ (_MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B (_MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK (_MX51_PAD_GPIO1_4__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__EIM_RDY (_MX51_PAD_GPIO1_4__EIM_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__GPIO1_4 (_MX51_PAD_GPIO1_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B (_MX51_PAD_GPIO1_4__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__CSI2_MCLK (_MX51_PAD_GPIO1_5__CSI2_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__DISP2_PIN16 (_MX51_PAD_GPIO1_5__DISP2_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__GPIO1_5 (_MX51_PAD_GPIO1_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B (_MX51_PAD_GPIO1_5__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_6__DISP2_PIN17 (_MX51_PAD_GPIO1_6__DISP2_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_6__GPIO1_6 (_MX51_PAD_GPIO1_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_6__REF_EN_B (_MX51_PAD_GPIO1_6__REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__CCM_OUT_0 (_MX51_PAD_GPIO1_7__CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__GPIO1_7 (_MX51_PAD_GPIO1_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__SD2_WP (_MX51_PAD_GPIO1_7__SD2_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_GPIO1_7__SPDIF_OUT1 (_MX51_PAD_GPIO1_7__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__CSI2_DATA_EN (_MX51_PAD_GPIO1_8__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__GPIO1_8 (_MX51_PAD_GPIO1_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__SD2_CD (_MX51_PAD_GPIO1_8__SD2_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
-#define MX51_PAD_GPIO1_8__USBH3_PWR (_MX51_PAD_GPIO1_8__USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__CCM_OUT_1 (_MX51_PAD_GPIO1_9__CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__DISP2_D1_CS (_MX51_PAD_GPIO1_9__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__DISP2_SER_CS (_MX51_PAD_GPIO1_9__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__GPIO1_9 (_MX51_PAD_GPIO1_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__SD2_LCTL (_MX51_PAD_GPIO1_9__SD2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX51_PAD_GPIO1_9__USBH3_OC (_MX51_PAD_GPIO1_9__USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__GPIO2_22 IOMUX_PAD(0x468, 0x0d4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_EB2__GPT_CMPOUT1 IOMUX_PAD(0x468, 0x0d4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__AUD5_RXC IOMUX_PAD(0x46c, 0x0d8, 6, 0x8dc, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__CSI1_D3 IOMUX_PAD(0x46c, 0x0d8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__FEC_RDATA1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__GPIO2_23 IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_EB3__GPT_CMPOUT2 IOMUX_PAD(0x46c, 0x0d8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_OE__EIM_OE IOMUX_PAD(0x470, 0x0dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_OE__GPIO2_24 IOMUX_PAD(0x470, 0x0dc, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS0__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS0__GPIO2_25 IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS1__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS1__GPIO2_26 IOMUX_PAD(0x478, 0x0e4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__AUD5_TXD IOMUX_PAD(0x47c, 0x0e8, 6, 0x8d8, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__CSI1_D4 IOMUX_PAD(0x47c, 0x0e8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__FEC_RDATA2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__GPIO2_27 IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS2__USBOTG_STP IOMUX_PAD(0x47c, 0x0e8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__AUD5_RXD IOMUX_PAD(0x480, 0x0ec, 6, 0x8d4, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__CSI1_D5 IOMUX_PAD(0x480, 0x0ec, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__FEC_RDATA3 IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__GPIO2_28 IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS3__USBOTG_NXT IOMUX_PAD(0x480, 0x0ec, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__AUD5_TXC IOMUX_PAD(0x484, 0x0f0, 6, 0x8e4, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__CSI1_D6 IOMUX_PAD(0x484, 0x0f0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_CS4__GPIO2_29 IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS4__USBOTG_CLK IOMUX_PAD(0x484, 0x0f0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__AUD5_TXFS IOMUX_PAD(0x488, 0x0f4, 6, 0x8e8, 1, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__CSI1_D7 IOMUX_PAD(0x488, 0x0f4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK IOMUX_PAD(0x488, 0x0f4, 4, 0x904, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_EIM_CS5__GPIO2_30 IOMUX_PAD(0x488, 0x0f4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CS5__USBOTG_DIR IOMUX_PAD(0x488, 0x0f4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DTACK__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DTACK__GPIO2_31 IOMUX_PAD(0x48c, 0x0f8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__EIM_LBA IOMUX_PAD(0x494, 0x0fc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_LBA__GPIO3_1 IOMUX_PAD(0x494, 0x0fc, 1, 0x978, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_EIM_CRE__EIM_CRE IOMUX_PAD(0x4a0, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_CRE__GPIO3_2 IOMUX_PAD(0x4a0, 0x100, 1, 0x97c, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__GPIO3_3 IOMUX_PAD(0x4e4, 0x108, 3, 0x980, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__NANDF_WE_B IOMUX_PAD(0x4e4, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__PATA_DIOW IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0 IOMUX_PAD(0x4e4, 0x108, 2, 0x93c, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__GPIO3_4 IOMUX_PAD(0x4e8, 0x10c, 3, 0x984, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__NANDF_RE_B IOMUX_PAD(0x4e8, 0x10c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__PATA_DIOR IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1 IOMUX_PAD(0x4e8, 0x10c, 2, 0x940, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__GPIO3_5 IOMUX_PAD(0x4ec, 0x110, 3, 0x988, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__NANDF_ALE IOMUX_PAD(0x4ec, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__GPIO3_6 IOMUX_PAD(0x4f0, 0x114, 3, 0x98c, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__NANDF_CLE IOMUX_PAD(0x4f0, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CLE__PATA_RESET_B IOMUX_PAD(0x4f0, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__GPIO3_7 IOMUX_PAD(0x4f4, 0x118, 3, 0x990, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__NANDF_WP_B IOMUX_PAD(0x4f4, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__PATA_DMACK IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2 IOMUX_PAD(0x4f4, 0x118, 2, 0x944, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__ECSPI2_SS1 IOMUX_PAD(0x4f8, 0x11c, 5, 0x930, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__GPIO3_8 IOMUX_PAD(0x4f8, 0x11c, 3, 0x994, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__NANDF_RB0 IOMUX_PAD(0x4f8, 0x11c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__PATA_DMARQ IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB0__SD3_DATA3 IOMUX_PAD(0x4f8, 0x11c, 2, 0x948, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__CSPI_MOSI IOMUX_PAD(0x4fc, 0x120, 6, 0x91c, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__ECSPI2_RDY IOMUX_PAD(0x4fc, 0x120, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__FEC_RX_CLK IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2)
+#define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS0__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS1__GPIO3_17 IOMUX_PAD(0x51c, 0x134, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS1__NANDF_CS1 IOMUX_PAD(0x51c, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__CSPI_SCLK IOMUX_PAD(0x520, 0x138, 6, 0x914, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS2__GPIO3_18 IOMUX_PAD(0x520, 0x138, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__PATA_DA_0 IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__SD4_DAT1 IOMUX_PAD(0x528, 0x140, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS4__USBH3_STP IOMUX_PAD(0x528, 0x140, 7, 0xa24, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__FEC_TDATA2 IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS5__GPIO3_21 IOMUX_PAD(0x52c, 0x144, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__NANDF_CS5 IOMUX_PAD(0x52c, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__PATA_DA_1 IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__SD4_DAT2 IOMUX_PAD(0x52c, 0x144, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS5__USBH3_DIR IOMUX_PAD(0x52c, 0x144, 7, 0xa1c, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__CSPI_SS3 IOMUX_PAD(0x530, 0x148, 7, 0x928, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__FEC_TDATA3 IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS6__GPIO3_22 IOMUX_PAD(0x530, 0x148, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__PATA_DA_2 IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS6__SD4_DAT3 IOMUX_PAD(0x530, 0x148, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_CS7__GPIO3_23 IOMUX_PAD(0x534, 0x14c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__NANDF_CS7 IOMUX_PAD(0x534, 0x14c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS7__SD3_CLK IOMUX_PAD(0x534, 0x14c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 IOMUX_PAD(0x538, 0x150, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__PATA_DATA15 IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D15__SD3_DAT7 IOMUX_PAD(0x53c, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__ECSPI2_SS3 IOMUX_PAD(0x540, 0x158, 2, 0x934, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__GPIO3_26 IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__NANDF_D14 IOMUX_PAD(0x540, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__PATA_DATA14 IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D14__SD3_DAT6 IOMUX_PAD(0x540, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__ECSPI2_SS2 IOMUX_PAD(0x544, 0x15c, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__GPIO3_27 IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__NANDF_D13 IOMUX_PAD(0x544, 0x15c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__PATA_DATA13 IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D13__SD3_DAT5 IOMUX_PAD(0x544, 0x15c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__ECSPI2_SS1 IOMUX_PAD(0x548, 0x160, 2, 0x930, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__GPIO3_28 IOMUX_PAD(0x548, 0x160, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__NANDF_D12 IOMUX_PAD(0x548, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__PATA_DATA12 IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D12__SD3_DAT4 IOMUX_PAD(0x548, 0x160, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__FEC_RX_DV IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__GPIO3_29 IOMUX_PAD(0x54c, 0x164, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__NANDF_D11 IOMUX_PAD(0x54c, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__PATA_DATA11 IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D11__SD3_DATA3 IOMUX_PAD(0x54c, 0x164, 5, 0x948, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__GPIO3_30 IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__NANDF_D10 IOMUX_PAD(0x550, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__PATA_DATA10 IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D10__SD3_DATA2 IOMUX_PAD(0x550, 0x168, 5, 0x944, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__FEC_RDATA0 IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4)
+#define MX51_PAD_NANDF_D9__GPIO3_31 IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__NANDF_D9 IOMUX_PAD(0x554, 0x16c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__PATA_DATA9 IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D9__SD3_DATA1 IOMUX_PAD(0x554, 0x16c, 5, 0x940, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__FEC_TDATA0 IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_NANDF_D8__GPIO4_0 IOMUX_PAD(0x558, 0x170, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__NANDF_D8 IOMUX_PAD(0x558, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__PATA_DATA8 IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D8__SD3_DATA0 IOMUX_PAD(0x558, 0x170, 5, 0x93c, 1, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__GPIO4_1 IOMUX_PAD(0x55c, 0x174, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__NANDF_D7 IOMUX_PAD(0x55c, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__PATA_DATA7 IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D7__USBH3_DATA0 IOMUX_PAD(0x55c, 0x174, 5, 0x9fc, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__GPIO4_2 IOMUX_PAD(0x560, 0x178, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__NANDF_D6 IOMUX_PAD(0x560, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__PATA_DATA6 IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__SD4_LCTL IOMUX_PAD(0x560, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D6__USBH3_DATA1 IOMUX_PAD(0x560, 0x178, 5, 0xa00, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__GPIO4_3 IOMUX_PAD(0x564, 0x17c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__NANDF_D5 IOMUX_PAD(0x564, 0x17c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__PATA_DATA5 IOMUX_PAD(0x564, 0x17c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__SD4_WP IOMUX_PAD(0x564, 0x17c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D5__USBH3_DATA2 IOMUX_PAD(0x564, 0x17c, 5, 0xa04, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__GPIO4_4 IOMUX_PAD(0x568, 0x180, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__PATA_DATA4 IOMUX_PAD(0x568, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__SD4_CD IOMUX_PAD(0x568, 0x180, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D4__USBH3_DATA3 IOMUX_PAD(0x568, 0x180, 5, 0xa08, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__GPIO4_5 IOMUX_PAD(0x56c, 0x184, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__NANDF_D3 IOMUX_PAD(0x56c, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__PATA_DATA3 IOMUX_PAD(0x56c, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__SD4_DAT4 IOMUX_PAD(0x56c, 0x184, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D3__USBH3_DATA4 IOMUX_PAD(0x56c, 0x184, 5, 0xa0c, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__GPIO4_6 IOMUX_PAD(0x570, 0x188, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__NANDF_D2 IOMUX_PAD(0x570, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__PATA_DATA2 IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__SD4_DAT5 IOMUX_PAD(0x570, 0x188, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D2__USBH3_DATA5 IOMUX_PAD(0x570, 0x188, 5, 0xa10, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__GPIO4_7 IOMUX_PAD(0x574, 0x18c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__NANDF_D1 IOMUX_PAD(0x574, 0x18c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__PATA_DATA1 IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__SD4_DAT6 IOMUX_PAD(0x574, 0x18c, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D1__USBH3_DATA6 IOMUX_PAD(0x574, 0x18c, 5, 0xa14, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__GPIO4_8 IOMUX_PAD(0x578, 0x190, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__NANDF_D0 IOMUX_PAD(0x578, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__PATA_DATA0 IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__SD4_DAT7 IOMUX_PAD(0x578, 0x190, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_D0__USBH3_DATA7 IOMUX_PAD(0x578, 0x190, 5, 0xa18, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D8__CSI1_D8 IOMUX_PAD(0x57c, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D8__GPIO3_12 IOMUX_PAD(0x57c, 0x194, 3, 0x998, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__CSI1_D9 IOMUX_PAD(0x580, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D9__GPIO3_13 IOMUX_PAD(0x580, 0x198, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1a0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58c, 0x1a4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1a8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1ac, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1b0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59c, 0x1b4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5a0, 0x1b8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5a4, 0x1bc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5a8, 0x1c0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5ac, 0x1c4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__GPIO3_14 IOMUX_PAD(0x5ac, 0x1c4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5b0, 0x1c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__GPIO3_15 IOMUX_PAD(0x5b0, 0x1c8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5b4, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5b8, __NA_, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D12__CSI2_D12 IOMUX_PAD(0x5bc, 0x1cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D12__GPIO4_9 IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__CSI2_D13 IOMUX_PAD(0x5c0, 0x1d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D13__GPIO4_10 IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_D14__CSI2_D14 IOMUX_PAD(0x5c4, 0x1d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D15__CSI2_D15 IOMUX_PAD(0x5c8, 0x1d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D16__CSI2_D16 IOMUX_PAD(0x5cc, 0x1dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D17__CSI2_D17 IOMUX_PAD(0x5d0, 0x1e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D18__CSI2_D18 IOMUX_PAD(0x5d4, 0x1e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D18__GPIO4_11 IOMUX_PAD(0x5d4, 0x1e4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_D19__CSI2_D19 IOMUX_PAD(0x5d8, 0x1e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_D19__GPIO4_12 IOMUX_PAD(0x5d8, 0x1e8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC IOMUX_PAD(0x5dc, 0x1ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_VSYNC__GPIO4_13 IOMUX_PAD(0x5dc, 0x1ec, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC IOMUX_PAD(0x5e0, 0x1f0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_HSYNC__GPIO4_14 IOMUX_PAD(0x5e0, 0x1f0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK IOMUX_PAD(0x5e4, 0x1f4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PIXCLK__GPIO4_15 IOMUX_PAD(0x5e4, 0x1f4, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__GPIO4_16 IOMUX_PAD(0x5e8, 0x1f8, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x5e8, 0x1f8, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__GPIO4_17 IOMUX_PAD(0x5ec, 0x1fc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x5ec, 0x1fc, 0x10, __NA_, 0, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD IOMUX_PAD(0x5f0, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18 IOMUX_PAD(0x5f0, 0x200, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD IOMUX_PAD(0x5f4, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19 IOMUX_PAD(0x5f4, 0x204, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_RXD__UART3_RXD IOMUX_PAD(0x5f4, 0x204, 1, 0x9f4, 2, MX51_UART_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__AUD3_TXC IOMUX_PAD(0x5f8, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20 IOMUX_PAD(0x5f8, 0x208, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS IOMUX_PAD(0x5fc, 0x20c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__GPIO4_21 IOMUX_PAD(0x5fc, 0x20c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_AUD3_BB_FS__UART3_TXD IOMUX_PAD(0x5fc, 0x20c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__GPIO4_22 IOMUX_PAD(0x600, 0x210, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MOSI__I2C1_SDA IOMUX_PAD(0x600, 0x210, 0x11, 0x9b4, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__AUD4_RXD IOMUX_PAD(0x604, 0x214, 1, 0x8c4, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_MISO__GPIO4_23 IOMUX_PAD(0x604, 0x214, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__AUD4_TXC IOMUX_PAD(0x608, 0x218, 1, 0x8cc, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS0__GPIO4_24 IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__AUD4_TXD IOMUX_PAD(0x60c, 0x21c, 1, 0x8c8, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SS1__GPIO4_25 IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__AUD4_TXFS IOMUX_PAD(0x610, 0x220, 1, 0x8d0, 1, NO_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_RDY__GPIO4_26 IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__GPIO4_27 IOMUX_PAD(0x614, 0x224, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_CSPI1_SCLK__I2C1_SCL IOMUX_PAD(0x614, 0x224, 0x11, 0x9b0, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_UART1_RXD__GPIO4_28 IOMUX_PAD(0x618, 0x228, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART1_TXD__GPIO4_29 IOMUX_PAD(0x61c, 0x22c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_TXD__PWM2_PWMO IOMUX_PAD(0x61c, 0x22c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART1_RTS__GPIO4_30 IOMUX_PAD(0x620, 0x230, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__GPIO4_31 IOMUX_PAD(0x624, 0x234, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__FIRI_TXD IOMUX_PAD(0x628, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__GPIO1_20 IOMUX_PAD(0x628, 0x238, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__FIRI_RXD IOMUX_PAD(0x62c, 0x23c, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__GPIO1_21 IOMUX_PAD(0x62c, 0x23c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62c, 0x23c, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__CSI1_D0 IOMUX_PAD(0x630, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__GPIO1_22 IOMUX_PAD(0x630, 0x240, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__UART1_DTR IOMUX_PAD(0x630, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_RXD__UART3_RXD IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__CSI1_D1 IOMUX_PAD(0x634, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__GPIO1_23 IOMUX_PAD(0x634, 0x244, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__UART1_DSR IOMUX_PAD(0x634, 0x244, 0, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_UART3_TXD__UART3_TXD IOMUX_PAD(0x634, 0x244, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__GPIO1_24 IOMUX_PAD(0x638, 0x248, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_OWIRE_LINE__SPDIF_OUT IOMUX_PAD(0x638, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63c, 0x24c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64c, 0x25c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__PLL1_BYP IOMUX_PAD(0x64c, 0x25c, 7, 0x90c, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__PLL2_BYP IOMUX_PAD(0x650, 0x260, 7, 0x910, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__PLL3_BYP IOMUX_PAD(0x654, 0x264, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__I2C2_SCL IOMUX_PAD(0x65c, 0x26c, 0x13, 0x9b8, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65c, 0x26c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__SPDIF_OUT1 IOMUX_PAD(0x65c, 0x26c, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__UART1_RI IOMUX_PAD(0x65c, 0x26c, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__UART3_RTS IOMUX_PAD(0x65c, 0x26c, 2, 0x9f0, 4, MX51_UART_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__I2C2_SDA IOMUX_PAD(0x660, 0x270, 0x13, 0x9bc, 1, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__UART1_DCD IOMUX_PAD(0x660, 0x270, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__UART3_CTS IOMUX_PAD(0x660, 0x270, 2, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__CSPI_SCLK IOMUX_PAD(0x678, 0x278, 1, 0x914, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__GPIO1_25 IOMUX_PAD(0x678, 0x278, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__I2C2_SCL IOMUX_PAD(0x678, 0x278, 0x15, 0x9b8, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__USBH1_CLK IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__CSPI_MOSI IOMUX_PAD(0x67c, 0x27c, 1, 0x91c, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__GPIO1_26 IOMUX_PAD(0x67c, 0x27c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__I2C2_SDA IOMUX_PAD(0x67c, 0x27c, 0x15, 0x9bc, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__USBH1_DIR IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__CSPI_RDY IOMUX_PAD(0x680, 0x280, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__GPIO1_27 IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__UART3_RXD IOMUX_PAD(0x680, 0x280, 5, 0x9f4, 6, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__USBH1_STP IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__CSPI_MISO IOMUX_PAD(0x684, 0x284, 1, 0x918, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__GPIO1_28 IOMUX_PAD(0x684, 0x284, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__UART3_TXD IOMUX_PAD(0x684, 0x284, 5, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__USBH1_NXT IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__GPIO1_11 IOMUX_PAD(0x688, 0x288, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__UART2_CTS IOMUX_PAD(0x688, 0x288, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__GPIO1_12 IOMUX_PAD(0x68c, 0x28c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__UART2_RXD IOMUX_PAD(0x68c, 0x28c, 1, 0x9ec, 4, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1 IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__GPIO1_13 IOMUX_PAD(0x690, 0x290, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__UART2_TXD IOMUX_PAD(0x690, 0x290, 1, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__GPIO1_14 IOMUX_PAD(0x694, 0x294, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__UART2_RTS IOMUX_PAD(0x694, 0x294, 1, 0x9e8, 5, MX51_UART_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__CSPI_SS0 IOMUX_PAD(0x698, 0x298, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__GPIO1_15 IOMUX_PAD(0x698, 0x298, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__CSPI_SS1 IOMUX_PAD(0x69c, 0x29c, 1, 0x920, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__GPIO1_16 IOMUX_PAD(0x69c, 0x29c, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5 IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__CSPI_SS3 IOMUX_PAD(0x6a0, 0x2a0, 1, 0x928, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__GPIO1_17 IOMUX_PAD(0x6a0, 0x2a0, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3 IOMUX_PAD(0x6a4, 0x2a4, 1, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3 IOMUX_PAD(0x6a4, 0x2a4, 5, 0x934, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__GPIO1_18 IOMUX_PAD(0x6a4, 0x2a4, 2, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__DI1_PIN11 IOMUX_PAD(0x6a8, 0x2a8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__ECSPI1_SS2 IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_DI1_PIN11__GPIO3_0 IOMUX_PAD(0x6a8, 0x2a8, 4, __NA_, 0, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__DI1_PIN12 IOMUX_PAD(0x6ac, 0x2ac, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN12__GPIO3_1 IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__DI1_PIN13 IOMUX_PAD(0x6b0, 0x2b0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN13__GPIO3_2 IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS IOMUX_PAD(0x6b4, 0x2b4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D0_CS__GPIO3_3 IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__DI1_D1_CS IOMUX_PAD(0x6b8, 0x2b8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN14 IOMUX_PAD(0x6b8, 0x2b8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN5 IOMUX_PAD(0x6b8, 0x2b8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_D1_CS__GPIO3_4 IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 IOMUX_PAD(0x6bc, 0x2bc, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN IOMUX_PAD(0x6bc, 0x2bc, 0, 0x9c4, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5 IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 IOMUX_PAD(0x6c0, 0x2c0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO IOMUX_PAD(0x6c0, 0x2c0, 0, 0x9c4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6 IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 IOMUX_PAD(0x6c4, 0x2c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 IOMUX_PAD(0x6c4, 0x2c4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK IOMUX_PAD(0x6c4, 0x2c4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7 IOMUX_PAD(0x6c4, 0x2c4, 4, 0x990, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 IOMUX_PAD(0x6c8, 0x2c8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 IOMUX_PAD(0x6c8, 0x2c8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS IOMUX_PAD(0x6c8, 0x2c8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8 IOMUX_PAD(0x6c8, 0x2c8, 4, 0x994, 1, MX51_GPIO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6cc, 0x2cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6d0, 0x2d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6d4, 0x2d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6d8, 0x2d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6dc, 0x2dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6e0, 0x2e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC IOMUX_PAD(0x6e4, 0x2e4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6e4, 0x2e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG IOMUX_PAD(0x6e8, 0x2e8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6e8, 0x2e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__BOOT_SRC0 IOMUX_PAD(0x6ec, 0x2ec, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6ec, 0x2ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__BOOT_SRC1 IOMUX_PAD(0x6f0, 0x2f0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6f0, 0x2f0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE IOMUX_PAD(0x6f4, 0x2f4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6f4, 0x2f4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 IOMUX_PAD(0x6f8, 0x2f8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6f8, 0x2f8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL IOMUX_PAD(0x6fc, 0x2fc, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6fc, 0x2fc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 IOMUX_PAD(0x700, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 IOMUX_PAD(0x704, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH IOMUX_PAD(0x708, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 IOMUX_PAD(0x70c, 0x30c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70c, 0x30c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 IOMUX_PAD(0x710, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 IOMUX_PAD(0x714, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN11 IOMUX_PAD(0x714, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN5 IOMUX_PAD(0x714, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 IOMUX_PAD(0x718, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN12 IOMUX_PAD(0x718, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN6 IOMUX_PAD(0x718, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 IOMUX_PAD(0x71c, 0x31c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71c, 0x31c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN13 IOMUX_PAD(0x71c, 0x31c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN7 IOMUX_PAD(0x71c, 0x31c, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 IOMUX_PAD(0x720, 0x320, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN14 IOMUX_PAD(0x720, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN8 IOMUX_PAD(0x720, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 IOMUX_PAD(0x724, 0x324, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS IOMUX_PAD(0x724, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP2_DAT16 IOMUX_PAD(0x724, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 IOMUX_PAD(0x728, 0x328, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS IOMUX_PAD(0x728, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP2_DAT17 IOMUX_PAD(0x728, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS IOMUX_PAD(0x728, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DISP1_SER_CLK IOMUX_PAD(0x740, 0x338, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DISP2_WAIT IOMUX_PAD(0x740, 0x338, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__CSI1_DATA_EN IOMUX_PAD(0x744, 0x33c, 3, 0x9a0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DISP1_SER_DIO IOMUX_PAD(0x744, 0x33c, 0, 0x9c0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__FEC_TX_ER IOMUX_PAD(0x744, 0x33c, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN IOMUX_PAD(0x748, 0x340, 3, 0x99c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__FEC_CRS IOMUX_PAD(0x748, 0x340, 2, 0x950, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74c, 0x344, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__FEC_MDC IOMUX_PAD(0x74c, 0x344, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__FEC_MDIO IOMUX_PAD(0x750, 0x348, 2, 0x954, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 IOMUX_PAD(0x754, 0x34c, 2, 0x95c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI2_PIN15 IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DISP1_SER_DIN IOMUX_PAD(0x758, 0x350, 0, 0x9c0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DISP2_PIN1 IOMUX_PAD(0x758, 0x350, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__FEC_RDATA2 IOMUX_PAD(0x758, 0x350, 2, 0x960, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75c, 0x354, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__FEC_RDATA3 IOMUX_PAD(0x75c, 0x354, 2, 0x964, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__KEY_COL6 IOMUX_PAD(0x75c, 0x354, 4, 0x9c8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__UART3_RXD IOMUX_PAD(0x75c, 0x354, 5, 0x9f4, 8, MX51_UART_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__USBH3_CLK IOMUX_PAD(0x75c, 0x354, 3, 0x9f8, 1, MX51_UART_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__FEC_RX_ER IOMUX_PAD(0x760, 0x358, 2, 0x970, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__KEY_COL7 IOMUX_PAD(0x760, 0x358, 4, 0x9cc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__UART3_TXD IOMUX_PAD(0x760, 0x358, 5, __NA_, 0, MX51_UART_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__USBH3_DIR IOMUX_PAD(0x760, 0x358, 3, 0xa1c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76c, 0x364, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__FEC_COL IOMUX_PAD(0x784, 0x37c, 2, 0x94c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__KEY_ROW7 IOMUX_PAD(0x784, 0x37c, 4, 0x9dc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__USBH3_DATA2 IOMUX_PAD(0x784, 0x37c, 3, 0xa04, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__FEC_RX_DV IOMUX_PAD(0x78c, 0x384, 2, 0x96c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__USBH3_DATA4 IOMUX_PAD(0x78c, 0x384, 3, 0xa0c, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__AUD6_TXC IOMUX_PAD(0x790, 0x388, 4, 0x8fc, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK IOMUX_PAD(0x790, 0x388, 2, 0x974, 1, MX51_PAD_CTRL_4)
+#define MX51_PAD_DISP2_DAT13__USBH3_DATA5 IOMUX_PAD(0x790, 0x388, 3, 0xa10, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__AUD6_TXFS IOMUX_PAD(0x794, 0x38c, 4, 0x900, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38c, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__FEC_RDATA0 IOMUX_PAD(0x794, 0x38c, 2, 0x958, 1, MX51_PAD_CTRL_4)
+#define MX51_PAD_DISP2_DAT14__USBH3_DATA6 IOMUX_PAD(0x794, 0x38c, 3, 0xa14, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__AUD6_RXFS IOMUX_PAD(0x798, 0x390, 4, 0x8f8, 1, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS IOMUX_PAD(0x798, 0x390, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__FEC_TDATA0 IOMUX_PAD(0x798, 0x390, 2, __NA_, 0, MX51_PAD_CTRL_5)
+#define MX51_PAD_DISP2_DAT15__USBH3_DATA7 IOMUX_PAD(0x798, 0x390, 3, 0xa18, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79c, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x79c, 0x394, 2, 0x91c, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7a0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x7a0, 0x398, 2, 0x914, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7a4, 0x39c, 1, 0x8d8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x7a4, 0x39c, 2, 0x918, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(__NA_, 0x01c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(__NA_, 0x020, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(__NA_, 0x024, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(__NA_, 0x028, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7a8, 0x3a0, 1, 0x8d4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(__NA_, 0x02c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(__NA_, 0x030, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(__NA_, 0x034, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(__NA_, 0x038, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7ac, 0x3a4, 1, 0x8e4, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(__NA_, 0x044, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(__NA_, 0x048, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(__NA_, 0x03c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(__NA_, 0x040, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7b0, 0x3a8, 1, 0x8e8, 2, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__I2C1_SDA IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x9b4, 2, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7c0, 0x3b8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
+#define MX51_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x7c4, 0x3bc, 2, 0x918, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD1_DAT4 IOMUX_PAD(0x7c4, 0x3bc, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7fc, 0x3d4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 5408fd1..527f8fe 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -23,2359 +23,1197 @@
/* These 2 defines are for pins that may not have a mux register, but could
* have a pad setting register, and vice-versa. */
-#define NON_PAD_I 0x00
+#define __NA_ 0x00
#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
-#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \
- PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \
- | PAD_CTL_HYS)
-#define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
-#define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x20, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x20, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x20, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0)
-#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0)
-#define _MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x28, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x28, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x28, 2, 0x74C, 0, 0)
-#define _MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x28, 4, 0x890, 1, 0)
-#define _MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x28, 5, 0x7A4, 0, 0)
-#define _MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x28, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0)
-#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0)
-#define _MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0)
-#define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x30, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x30, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x30, 2, 0x748, 0, 0)
-#define _MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x30, 4, 0x898, 1, 0)
-#define _MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x30, 5, 0x7A8, 0, 0)
-#define _MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x30, 6, 0x800, 0, 0)
-#define _MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x30, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x34, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x34, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x34, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x34, 4, 0x804, 0, 0)
-#define _MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x34, 5, 0x7AC, 0, 0)
-#define _MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x34, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x34, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x38, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x38, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x38, 2, 0x760, 0, 0)
-#define _MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x38, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x38, 5, 0x7B0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x38, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x38, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x3C, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x3C, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x3C, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x3C, 3, 0x870, 0, 0)
-#define _MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x3C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, 0)
-#define _MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x3C, 5, 0x7B4, 0, 0)
-#define _MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x3C, 6, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x3C, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x40, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x40, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x40, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x40, 3, 0x768, 0, 0)
-#define _MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x40, 4 | IOMUX_CONFIG_SION, 0x820, 0, 0)
-#define _MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x40, 5, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x40, 6, 0x77C, 0, 0)
-#define _MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x40, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x44, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x44, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x44, 2, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x44, 3, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x44, 4, 0x894, 0, 0)
-#define _MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x44, 5, 0x89C, 0, 0)
-#define _MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x44, 7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x48, 0, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0)
-#define _MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x4C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x4C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x4C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x4C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x4C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x50, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x50, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x50, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x50, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x50, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x50, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x54, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x54, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x54, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x54, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x54, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x54, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x58, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x58, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x58, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x58, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x58, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x58, 7, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x5C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x5C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x5C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x5C, 3, 0x7FC, 0, 0)
-#define _MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x5C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x5C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x5C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x60, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x60, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x60, 2, 0x780, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x60, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x60, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x60, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x60, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x64, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x64, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x64, 2, 0x788, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x64, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x390, 0x64, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x64, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x64, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x68, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x68, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x68, 2, 0x784, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x68, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x68, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x68, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x68, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x6C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x6C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x6C, 2, 0x78C, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x6C, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x6C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x6C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x6C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x70, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x70, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x70, 2, 0x790, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x70, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x70, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x70, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x70, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x74, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x74, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x74, 2, 0x794, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x74, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x74, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x74, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x74, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x78, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x78, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x78, 2, 0x798, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x78, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x78, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x78, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x78, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x7C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x7C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x7C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x7C, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x7C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x7C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x7C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x80, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x80, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x80, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x80, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x80, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x80, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x80, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x84, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x84, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x84, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x84, 3, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x84, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x84, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x84, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x88, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x88, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x88, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x3B4, 0x88, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x88, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x88, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x8C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x8C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x8C, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x3B8, 0x8C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x8C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x8C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x90, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x90, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x90, 2, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x3BC, 0x90, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x90, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x90, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x94, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x94, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x94, 3, 0x754, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 IOMUX_PAD(0x3C0, 0x94, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x94, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x94, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x98, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x98, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x98, 3, 0x750, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 IOMUX_PAD(0x3C4, 0x98, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x98, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x98, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x9C, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x9C, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x9C, 2, 0x7AC, 1, 0)
-#define _MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x9C, 3, 0x7C8, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 IOMUX_PAD(0x3C8, 0x9C, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x9C, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x9C, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0xA0, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0xA0, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0xA0, 2, 0x7C0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0xA0, 3, 0x758, 1, 0)
-#define _MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0xA0, 4, 0x868, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 IOMUX_PAD(0x3CC, 0xA0, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0xA0, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0xA0, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0xA4, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0xA4, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0xA4, 2, 0x7BC, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0xA4, 3, 0x74C, 1, 0)
-#define _MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0xA4, 4, 0x86C, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 IOMUX_PAD(0x3D0, 0xA4, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0xA4, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0xA8, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0xA8, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0xA8, 2, 0x7C4, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0xA8, 3, 0x75C, 1, 0)
-#define _MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0xA8, 4, 0x73C, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 IOMUX_PAD(0x3D4, 0xA8, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0xA8, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0xA8, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0xAC, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0xAC, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0xAC, 2, 0x7B8, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0xAC, 3, 0x748, 1, 0)
-#define _MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0xAC, 4, 0x738, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 IOMUX_PAD(0x3D8, 0xAC, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0xAC, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0xAC, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0xB0, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0xB0, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0xB0, 2, 0x79C, 1, 0)
-#define _MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0xB0, 3, 0x740, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 IOMUX_PAD(0x3DC, 0xB0, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0xB0, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0xB0, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0xB4, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0xB4, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0xB4, 2, 0x7A4, 1, 0)
-#define _MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0xB4, 3, 0x734, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0xB4, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0xB4, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0xB4, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0xB8, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0xB8, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0xB8, 2, 0x7A0, 1, 0)
-#define _MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0xB8, 3, 0x744, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0xB8, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0xB8, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0xB8, 7, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0xBC, 0, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0xBC, 1, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0xBC, 2, 0x7A8, 1, 0)
-#define _MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0xBC, 3, 0x730, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0xBC, 5, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0xBC, 6, 0x0, 0, 0)
-#define _MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0xBC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0xC0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0xC0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0xC0, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0xC0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0xC4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0xC4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0xC4, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0xC4, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0xC4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0xC4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0xC8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0xC8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0xC8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0xC8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0xC8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0xCC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0xCC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0xCC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0xCC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0xCC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0xD0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0xD0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0xD0, 2, 0x840, 1, 0)
-#define _MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0xD0, 3, 0x79C, 2, 0)
-#define _MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0xD0, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0xD0, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0xD0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0xD0, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0xD4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0xD4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0xD4, 2, 0x84C, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0xD4, 3, 0x7A4, 2, 0)
-#define _MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0xD4, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0xD4, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0xD4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0xD4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0xD8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0xD8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0xD8, 2, 0x844, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0xD8, 3, 0x7A0, 2, 0)
-#define _MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0xD8, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0xD8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0xD8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0xD8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0xDC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0xDC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0xDC, 2, 0x850, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0xDC, 3, 0x7A8, 2, 0)
-#define _MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0xDC, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0xDC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0xDC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0xDC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0xE0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0xE0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0xE0, 2, 0x848, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0xE0, 3, 0x7B8, 1, 0)
-#define _MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0xE0, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0xE0, 5 | IOMUX_CONFIG_SION, 0x818, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0xE0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0xE0, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0xE4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0xE4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0xE4, 2, 0x854, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0xE4, 3, 0x7C0, 1, 0)
-#define _MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0xE4, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0xE4, 5 | IOMUX_CONFIG_SION, 0x814, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0xE4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0)
-#define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0xE8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0xE8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0xEC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0xEC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, 0)
-#define _MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0xEC, 3, 0x7C4, 1, 0)
-#define _MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0xEC, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0xEC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0xEC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0xF0, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0xF4, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0xF4, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0xF4, 2, 0x890, 3, 0)
-#define _MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0xF4, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0xF4, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0xF4, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0xF8, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0xFC, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0xFC, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0xFC, 2, 0x898, 3, 0)
-#define _MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0xFC, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0xFC, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0xFC, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0xFC, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, 0)
-#define _MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, 0)
-#define _MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, 0)
-#define _MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, 0)
-#define _MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, 0)
-#define _MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0)
-#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, 0)
-#define _MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0)
-#define _MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0)
-#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, 0)
-#define _MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0)
-#define _MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0)
-#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, 0)
-#define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0)
-#define _MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0)
-#define _MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, 0)
-#define _MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, 0)
-#define _MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0)
-#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, 0)
-#define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0)
-#define _MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, 0)
-#define _MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, 0)
-#define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, 0)
-#define _MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, 0)
-#define _MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, 0)
-#define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0)
-#define _MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0)
-#define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0)
-#define _MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, 0)
-#define _MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, 0)
-#define _MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, 0)
-#define _MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, 0)
-#define _MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, 0)
-#define _MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0)
-#define _MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0)
-#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, 0)
-#define _MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, 0)
-#define _MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, 0)
-#define _MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, 0)
-#define _MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, 0)
-#define _MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, 0)
-#define _MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, 0)
-#define _MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, 0)
-#define _MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, 0)
-#define _MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, 0)
-#define _MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, 0)
-#define _MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, 0)
-#define _MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, 0)
-#define _MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, 0)
-#define _MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, 0)
-#define _MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, 0)
-#define _MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, 0)
-#define _MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, 0x0, 0, 0)
-#define _MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(NON_PAD_I, 0x1EC, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(NON_PAD_I, 0x1EC, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(NON_PAD_I, 0x1F0, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(NON_PAD_I, 0x1F0, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(NON_PAD_I, 0x1F4, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(NON_PAD_I, 0x1F4, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(NON_PAD_I, 0x1F8, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(NON_PAD_I, 0x1F8, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(NON_PAD_I, 0x1FC, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(NON_PAD_I, 0x1FC, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(NON_PAD_I, 0x200, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(NON_PAD_I, 0x200, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(NON_PAD_I, 0x204, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(NON_PAD_I, 0x204, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(NON_PAD_I, 0x208, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(NON_PAD_I, 0x208, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(NON_PAD_I, 0x20C, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(NON_PAD_I, 0x20C, 1, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(NON_PAD_I, 0x210, 0, 0x0, 0, 0)
-#define _MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(NON_PAD_I, 0x210, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, 0)
-#define _MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, 0)
-#define _MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, 0)
-#define _MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, 0)
-#define _MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, 0x0, 0, 0)
-#define _MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, 0)
-#define _MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, 0)
-#define _MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, 0)
-#define _MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, 0)
-#define _MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, 0x0, 0, 0)
-#define _MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, 0)
-#define _MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, 0)
-#define _MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, 0)
-#define _MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, 0)
-#define _MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, 0)
-#define _MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, 0)
-#define _MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, 0)
-#define _MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, 0)
-#define _MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, 0)
-#define _MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, 0)
-#define _MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, 0)
-#define _MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, 0x0, 0, 0)
-#define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, 0)
-#define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, 0)
-#define _MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, 0)
-#define _MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, 0)
-#define _MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, 0)
-#define _MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, 0)
-#define _MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, 0)
-#define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, 0)
-#define _MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, 0)
-#define _MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, 0)
-#define _MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, 0)
-#define _MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, 0)
-#define _MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, IOMUX_CONFIG_SION, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, 0)
-#define _MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, 0)
-#define _MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, 0)
-#define _MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, 0)
-#define _MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, 0)
-#define _MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, 0)
-#define _MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, 0x0, 0, 0)
-#define _MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, 0)
-#define _MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, 0)
-#define _MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, 0)
-#define _MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, 0)
-#define _MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, 0)
-#define _MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, 0)
-#define _MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, 0)
-#define _MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, 0)
-#define _MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, 0)
-#define _MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, 0)
-#define _MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, 0)
-#define _MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, 0)
-#define _MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, 0)
-#define _MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, 0)
-#define _MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, 0)
-#define _MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, 0x0, 0, 0)
-#define _MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, 0)
-#define _MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, 0)
-#define _MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, 0)
-#define _MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, 0)
-#define _MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, 0)
-#define _MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, 0)
-#define _MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, 0)
-#define _MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, 0)
-#define _MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, 0)
-#define _MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, 0)
-#define _MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, 0)
-#define _MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, 0)
-#define _MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, 0)
-#define _MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, 0)
-#define _MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, 0)
-#define _MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, 0)
-#define _MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, 0)
-#define _MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, 0)
-#define _MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, 0)
-#define _MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, 0)
-#define _MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, 0)
-#define _MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, 0)
-#define _MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, 0)
-#define _MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, 0)
-#define _MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0)
-#define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0)
-#define _MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0)
-#define _MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0)
-#define _MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, 0)
-#define _MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, 0)
-#define _MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, 0)
-#define _MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, 0)
-#define _MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, 0)
-#define _MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, 0)
-#define _MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, 0)
-#define _MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, 0)
-#define _MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, 0)
-#define _MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, 0)
-#define _MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, 0)
-#define _MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, 0)
-#define _MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, 0)
-#define _MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, 0)
-#define _MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, 0x0, 0, 0)
-#define MX53_PAD_GPIO_19__KPP_COL_5 (_MX53_PAD_GPIO_19__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__GPIO4_5 (_MX53_PAD_GPIO_19__GPIO4_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__CCM_CLKO (_MX53_PAD_GPIO_19__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__SPDIF_OUT1 (_MX53_PAD_GPIO_19__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 (_MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__ECSPI1_RDY (_MX53_PAD_GPIO_19__ECSPI1_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__FEC_TDATA_3 (_MX53_PAD_GPIO_19__FEC_TDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_19__SRC_INT_BOOT (_MX53_PAD_GPIO_19__SRC_INT_BOOT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__KPP_COL_0 (_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__GPIO4_6 (_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC (_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__ECSPI1_SCLK (_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__FEC_RDATA_3 (_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST (_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__KPP_ROW_0 (_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__GPIO4_7 (_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD (_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI (_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__FEC_TX_ER (_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__KPP_COL_1 (_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__GPIO4_8 (_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS (_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__ECSPI1_MISO (_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__FEC_RX_CLK (_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY (_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__KPP_ROW_1 (_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__GPIO4_9 (_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD (_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 (_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__FEC_COL (_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID (_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__KPP_COL_2 (_MX53_PAD_KEY_COL2__KPP_COL_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__GPIO4_10 (_MX53_PAD_KEY_COL2__GPIO4_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__CAN1_TXCAN (_MX53_PAD_KEY_COL2__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__FEC_MDIO (_MX53_PAD_KEY_COL2__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__ECSPI1_SS1 (_MX53_PAD_KEY_COL2__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__FEC_RDATA_2 (_MX53_PAD_KEY_COL2__FEC_RDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE (_MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__KPP_ROW_2 (_MX53_PAD_KEY_ROW2__KPP_ROW_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__GPIO4_11 (_MX53_PAD_KEY_ROW2__GPIO4_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__CAN1_RXCAN (_MX53_PAD_KEY_ROW2__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__FEC_MDC (_MX53_PAD_KEY_ROW2__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 (_MX53_PAD_KEY_ROW2__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 (_MX53_PAD_KEY_ROW2__FEC_TDATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR (_MX53_PAD_KEY_ROW2__USBPHY1_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__KPP_COL_3 (_MX53_PAD_KEY_COL3__KPP_COL_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__KPP_ROW_3 (_MX53_PAD_KEY_ROW3__KPP_ROW_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__KPP_COL_4 (_MX53_PAD_KEY_COL4__KPP_COL_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__GPIO4_14 (_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__IPU_SISG_4 (_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC (_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 (_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__KPP_ROW_4 (_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__GPIO4_15 (_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__IPU_SISG_5 (_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR (_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID (_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK (_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 (_MX53_PAD_DI0_DISP_CLK__GPIO4_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR (_MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 (_MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 (_MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID (_MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 (_MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__GPIO4_17 (_MX53_PAD_DI0_PIN15__GPIO4_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC (_MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 (_MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 (_MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID (_MX53_PAD_DI0_PIN15__USBPHY1_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 (_MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__GPIO4_18 (_MX53_PAD_DI0_PIN2__GPIO4_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD (_MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 (_MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 (_MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION (_MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 (_MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__GPIO4_19 (_MX53_PAD_DI0_PIN3__GPIO4_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS (_MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 (_MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 (_MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG (_MX53_PAD_DI0_PIN3__USBPHY1_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 (_MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__GPIO4_20 (_MX53_PAD_DI0_PIN4__GPIO4_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD (_MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__ESDHC1_WP (_MX53_PAD_DI0_PIN4__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD (_MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 (_MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT (_MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 (_MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__GPIO4_21 (_MX53_PAD_DISP0_DAT0__GPIO4_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__CSPI_SCLK (_MX53_PAD_DISP0_DAT0__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 (_MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN (_MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 (_MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY (_MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 (_MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__GPIO4_22 (_MX53_PAD_DISP0_DAT1__GPIO4_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__CSPI_MOSI (_MX53_PAD_DISP0_DAT1__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 (_MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL (_MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 (_MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID (_MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 (_MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__GPIO4_23 (_MX53_PAD_DISP0_DAT2__GPIO4_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__CSPI_MISO (_MX53_PAD_DISP0_DAT2__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 (_MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE (_MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 (_MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE (_MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 (_MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__GPIO4_24 (_MX53_PAD_DISP0_DAT3__GPIO4_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__CSPI_SS0 (_MX53_PAD_DISP0_DAT3__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 (_MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR (_MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 (_MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR (_MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 (_MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__GPIO4_25 (_MX53_PAD_DISP0_DAT4__GPIO4_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__CSPI_SS1 (_MX53_PAD_DISP0_DAT4__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 (_MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB (_MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 (_MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK (_MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 (_MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__GPIO4_26 (_MX53_PAD_DISP0_DAT5__GPIO4_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__CSPI_SS2 (_MX53_PAD_DISP0_DAT5__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 (_MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS (_MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 (_MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 (_MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 (_MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__GPIO4_27 (_MX53_PAD_DISP0_DAT6__GPIO4_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__CSPI_SS3 (_MX53_PAD_DISP0_DAT6__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 (_MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE (_MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 (_MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 (_MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 (_MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__GPIO4_28 (_MX53_PAD_DISP0_DAT7__GPIO4_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__CSPI_RDY (_MX53_PAD_DISP0_DAT7__CSPI_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 (_MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 (_MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 (_MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID (_MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 (_MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__GPIO4_29 (_MX53_PAD_DISP0_DAT8__GPIO4_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__PWM1_PWMO (_MX53_PAD_DISP0_DAT8__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B (_MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 (_MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 (_MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID (_MX53_PAD_DISP0_DAT8__USBPHY2_AVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 (_MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__GPIO4_30 (_MX53_PAD_DISP0_DAT9__GPIO4_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__PWM2_PWMO (_MX53_PAD_DISP0_DAT9__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B (_MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 (_MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 (_MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 (_MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 (_MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__GPIO4_31 (_MX53_PAD_DISP0_DAT10__GPIO4_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP (_MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 (_MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 (_MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 (_MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 (_MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__GPIO5_5 (_MX53_PAD_DISP0_DAT11__GPIO5_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT (_MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 (_MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 (_MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 (_MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 (_MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__GPIO5_6 (_MX53_PAD_DISP0_DAT12__GPIO5_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK (_MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 (_MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 (_MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 (_MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 (_MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__GPIO5_7 (_MX53_PAD_DISP0_DAT13__GPIO5_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS (_MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 (_MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 (_MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 (_MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 (_MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__GPIO5_8 (_MX53_PAD_DISP0_DAT14__GPIO5_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC (_MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 (_MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 (_MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 (_MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 (_MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__GPIO5_9 (_MX53_PAD_DISP0_DAT15__GPIO5_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 (_MX53_PAD_DISP0_DAT15__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 (_MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 (_MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 (_MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 (_MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__GPIO5_10 (_MX53_PAD_DISP0_DAT16__GPIO5_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI (_MX53_PAD_DISP0_DAT16__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC (_MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 (_MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 (_MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 (_MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 (_MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 (_MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__GPIO5_11 (_MX53_PAD_DISP0_DAT17__GPIO5_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO (_MX53_PAD_DISP0_DAT17__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD (_MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 (_MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 (_MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 (_MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 (_MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__GPIO5_12 (_MX53_PAD_DISP0_DAT18__GPIO5_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 (_MX53_PAD_DISP0_DAT18__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS (_MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 (_MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 (_MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 (_MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 (_MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__GPIO5_13 (_MX53_PAD_DISP0_DAT19__GPIO5_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK (_MX53_PAD_DISP0_DAT19__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC (_MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 (_MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 (_MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 (_MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 (_MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__GPIO5_14 (_MX53_PAD_DISP0_DAT20__GPIO5_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK (_MX53_PAD_DISP0_DAT20__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC (_MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 (_MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 (_MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI (_MX53_PAD_DISP0_DAT20__SATA_PHY_TDI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 (_MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__GPIO5_15 (_MX53_PAD_DISP0_DAT21__GPIO5_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI (_MX53_PAD_DISP0_DAT21__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD (_MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 (_MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 (_MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO (_MX53_PAD_DISP0_DAT21__SATA_PHY_TDO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 (_MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__GPIO5_16 (_MX53_PAD_DISP0_DAT22__GPIO5_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO (_MX53_PAD_DISP0_DAT22__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS (_MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 (_MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 (_MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK (_MX53_PAD_DISP0_DAT22__SATA_PHY_TCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 (_MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__GPIO5_17 (_MX53_PAD_DISP0_DAT23__GPIO5_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 (_MX53_PAD_DISP0_DAT23__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD (_MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 (_MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 (_MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS (_MX53_PAD_DISP0_DAT23__SATA_PHY_TMS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK (_MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 (_MX53_PAD_CSI0_PIXCLK__GPIO5_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 (_MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 (_MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC (_MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__GPIO5_19 (_MX53_PAD_CSI0_MCLK__GPIO5_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK (_MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 (_MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 (_MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL (_MX53_PAD_CSI0_MCLK__TPIU_TRCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN (_MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 (_MX53_PAD_CSI0_DATA_EN__GPIO5_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 (_MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 (_MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK (_MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC (_MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__GPIO5_21 (_MX53_PAD_CSI0_VSYNC__GPIO5_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 (_MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 (_MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 (_MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 (_MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__GPIO5_22 (_MX53_PAD_CSI0_DAT4__GPIO5_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__KPP_COL_5 (_MX53_PAD_CSI0_DAT4__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK (_MX53_PAD_CSI0_DAT4__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP (_MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC (_MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 (_MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 (_MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 (_MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__GPIO5_23 (_MX53_PAD_CSI0_DAT5__GPIO5_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 (_MX53_PAD_CSI0_DAT5__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI (_MX53_PAD_CSI0_DAT5__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT (_MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD (_MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 (_MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 (_MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 (_MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__GPIO5_24 (_MX53_PAD_CSI0_DAT6__GPIO5_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__KPP_COL_6 (_MX53_PAD_CSI0_DAT6__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO (_MX53_PAD_CSI0_DAT6__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK (_MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS (_MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 (_MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 (_MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 (_MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__GPIO5_25 (_MX53_PAD_CSI0_DAT7__GPIO5_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 (_MX53_PAD_CSI0_DAT7__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 (_MX53_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR (_MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD (_MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 (_MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 (_MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 (_MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__GPIO5_26 (_MX53_PAD_CSI0_DAT8__GPIO5_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__GPIO5_27 (_MX53_PAD_CSI0_DAT9__GPIO5_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__GPIO5_28 (_MX53_PAD_CSI0_DAT10__GPIO5_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX (_MX53_PAD_CSI0_DAT10__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO (_MX53_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC (_MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 (_MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 (_MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 (_MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 (_MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__GPIO5_29 (_MX53_PAD_CSI0_DAT11__GPIO5_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX (_MX53_PAD_CSI0_DAT11__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 (_MX53_PAD_CSI0_DAT11__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS (_MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 (_MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 (_MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 (_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 (_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__GPIO5_30 (_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 (_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 (_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 (_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 (_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 (_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__GPIO5_31 (_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 (_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 (_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 (_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 (_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 (_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__GPIO6_0 (_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 (_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 (_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 (_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 (_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 (_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__GPIO6_1 (_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 (_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 (_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 (_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 (_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 (_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__GPIO6_2 (_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 (_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 (_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 (_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 (_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 (_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__GPIO6_3 (_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 (_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 (_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 (_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 (_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 (_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__GPIO6_4 (_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 (_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 (_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 (_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 (_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 (_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__GPIO6_5 (_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 (_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 (_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 (_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK (_MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 (_MX53_PAD_EIM_A25__EMI_WEIM_A_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__GPIO5_2 (_MX53_PAD_EIM_A25__GPIO5_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__ECSPI2_RDY (_MX53_PAD_EIM_A25__ECSPI2_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 (_MX53_PAD_EIM_A25__IPU_DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__CSPI_SS1 (_MX53_PAD_EIM_A25__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS (_MX53_PAD_EIM_A25__IPU_DI0_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A25__USBPHY1_BISTOK (_MX53_PAD_EIM_A25__USBPHY1_BISTOK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 (_MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__GPIO2_30 (_MX53_PAD_EIM_EB2__GPIO2_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 (_MX53_PAD_EIM_D19__IPU_DI0_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS (_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__ECSPI1_SS1 (_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__EPIT1_EPITO (_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC (_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 (_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__GPIO3_20 (_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 (_MX53_PAD_EIM_D20__IPU_DI0_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS (_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__CSPI_SS0 (_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__EPIT2_EPITO (_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 (_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__GPIO3_21 (_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 (_MX53_PAD_EIM_D22__IPU_DI0_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN (_MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__CSPI_MISO (_MX53_PAD_EIM_D22__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR (_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 (_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__GPIO3_23 (_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D23__UART1_DCD (_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS (_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 (_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 (_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 (_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__GPIO2_31 (_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__UART1_RI (_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC (_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 (_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__GPIO3_24 (_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D24__ECSPI1_SS2 (_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__CSPI_SS2 (_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS (_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__ECSPI2_SS2 (_MX53_PAD_EIM_D24__ECSPI2_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__UART1_DTR (_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 (_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__GPIO3_25 (_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D25__ECSPI1_SS3 (_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__CSPI_SS3 (_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC (_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__ECSPI2_SS3 (_MX53_PAD_EIM_D25__ECSPI2_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__UART1_DSR (_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 (_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__GPIO3_26 (_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D26__FIRI_RXD (_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 (_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 (_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_SISG_2 (_MX53_PAD_EIM_D26__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 (_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 (_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__GPIO3_27 (_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D27__FIRI_TXD (_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 (_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 (_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_SISG_3 (_MX53_PAD_EIM_D27__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 (_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 (_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__GPIO3_28 (_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__GPIO3_29 (_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS (_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__CSPI_SS0 (_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 (_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC (_MX53_PAD_EIM_D29__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 (_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 (_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__GPIO3_30 (_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 (_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 (_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 (_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC (_MX53_PAD_EIM_D30__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC (_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 (_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__GPIO3_31 (_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 (_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 (_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 (_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D31__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 (_MX53_PAD_EIM_A24__EMI_WEIM_A_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__GPIO5_4 (_MX53_PAD_EIM_A24__GPIO5_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 (_MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 (_MX53_PAD_EIM_A24__IPU_CSI1_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__IPU_SISG_2 (_MX53_PAD_EIM_A24__IPU_SISG_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A24__USBPHY2_BVALID (_MX53_PAD_EIM_A24__USBPHY2_BVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 (_MX53_PAD_EIM_A23__EMI_WEIM_A_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__GPIO6_6 (_MX53_PAD_EIM_A23__GPIO6_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 (_MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 (_MX53_PAD_EIM_A23__IPU_CSI1_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__IPU_SISG_3 (_MX53_PAD_EIM_A23__IPU_SISG_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION (_MX53_PAD_EIM_A23__USBPHY2_ENDSESSION | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 (_MX53_PAD_EIM_A22__EMI_WEIM_A_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__GPIO2_16 (_MX53_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 (_MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 (_MX53_PAD_EIM_A22__IPU_CSI1_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 (_MX53_PAD_EIM_A22__SRC_BT_CFG1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 (_MX53_PAD_EIM_A21__EMI_WEIM_A_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__GPIO2_17 (_MX53_PAD_EIM_A21__GPIO2_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 (_MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 (_MX53_PAD_EIM_A21__IPU_CSI1_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 (_MX53_PAD_EIM_A21__SRC_BT_CFG1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 (_MX53_PAD_EIM_A20__EMI_WEIM_A_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__GPIO2_18 (_MX53_PAD_EIM_A20__GPIO2_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 (_MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 (_MX53_PAD_EIM_A20__IPU_CSI1_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 (_MX53_PAD_EIM_A20__SRC_BT_CFG1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 (_MX53_PAD_EIM_A19__EMI_WEIM_A_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__GPIO2_19 (_MX53_PAD_EIM_A19__GPIO2_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 (_MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 (_MX53_PAD_EIM_A19__IPU_CSI1_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 (_MX53_PAD_EIM_A19__SRC_BT_CFG1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 (_MX53_PAD_EIM_A18__EMI_WEIM_A_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__GPIO2_20 (_MX53_PAD_EIM_A18__GPIO2_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 (_MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 (_MX53_PAD_EIM_A18__IPU_CSI1_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 (_MX53_PAD_EIM_A18__SRC_BT_CFG1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 (_MX53_PAD_EIM_A17__EMI_WEIM_A_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__GPIO2_21 (_MX53_PAD_EIM_A17__GPIO2_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 (_MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 (_MX53_PAD_EIM_A17__IPU_CSI1_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 (_MX53_PAD_EIM_A17__SRC_BT_CFG1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 (_MX53_PAD_EIM_A16__EMI_WEIM_A_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__GPIO2_22 (_MX53_PAD_EIM_A16__GPIO2_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK (_MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK (_MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 (_MX53_PAD_EIM_A16__SRC_BT_CFG1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 (_MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__GPIO2_23 (_MX53_PAD_EIM_CS0__GPIO2_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__ECSPI2_SCLK (_MX53_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 (_MX53_PAD_EIM_CS0__IPU_DI1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 (_MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__GPIO2_24 (_MX53_PAD_EIM_CS1__GPIO2_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__ECSPI2_MOSI (_MX53_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 (_MX53_PAD_EIM_CS1__IPU_DI1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__EMI_WEIM_OE (_MX53_PAD_EIM_OE__EMI_WEIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__GPIO2_25 (_MX53_PAD_EIM_OE__GPIO2_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__ECSPI2_MISO (_MX53_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 (_MX53_PAD_EIM_OE__IPU_DI1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_OE__USBPHY2_IDDIG (_MX53_PAD_EIM_OE__USBPHY2_IDDIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__EMI_WEIM_RW (_MX53_PAD_EIM_RW__EMI_WEIM_RW | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__GPIO2_26 (_MX53_PAD_EIM_RW__GPIO2_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__ECSPI2_SS0 (_MX53_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 (_MX53_PAD_EIM_RW__IPU_DI1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT (_MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA (_MX53_PAD_EIM_LBA__EMI_WEIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__GPIO2_27 (_MX53_PAD_EIM_LBA__GPIO2_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__ECSPI2_SS1 (_MX53_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 (_MX53_PAD_EIM_LBA__IPU_DI1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 (_MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 (_MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__GPIO2_28 (_MX53_PAD_EIM_EB0__GPIO2_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 (_MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 (_MX53_PAD_EIM_EB0__IPU_CSI1_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY (_MX53_PAD_EIM_EB0__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 (_MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 (_MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__GPIO2_29 (_MX53_PAD_EIM_EB1__GPIO2_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 (_MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 (_MX53_PAD_EIM_EB1__IPU_CSI1_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 (_MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 (_MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__GPIO3_0 (_MX53_PAD_EIM_DA0__GPIO3_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 (_MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 (_MX53_PAD_EIM_DA0__IPU_CSI1_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 (_MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 (_MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__GPIO3_1 (_MX53_PAD_EIM_DA1__GPIO3_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 (_MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 (_MX53_PAD_EIM_DA1__IPU_CSI1_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 (_MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 (_MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__GPIO3_2 (_MX53_PAD_EIM_DA2__GPIO3_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 (_MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 (_MX53_PAD_EIM_DA2__IPU_CSI1_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 (_MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 (_MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__GPIO3_3 (_MX53_PAD_EIM_DA3__GPIO3_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 (_MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 (_MX53_PAD_EIM_DA3__IPU_CSI1_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 (_MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 (_MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__GPIO3_4 (_MX53_PAD_EIM_DA4__GPIO3_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 (_MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 (_MX53_PAD_EIM_DA4__IPU_CSI1_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 (_MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 (_MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__GPIO3_5 (_MX53_PAD_EIM_DA5__GPIO3_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 (_MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 (_MX53_PAD_EIM_DA5__IPU_CSI1_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 (_MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 (_MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__GPIO3_6 (_MX53_PAD_EIM_DA6__GPIO3_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 (_MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 (_MX53_PAD_EIM_DA6__IPU_CSI1_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 (_MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 (_MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__GPIO3_7 (_MX53_PAD_EIM_DA7__GPIO3_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 (_MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 (_MX53_PAD_EIM_DA7__IPU_CSI1_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 (_MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 (_MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__GPIO3_8 (_MX53_PAD_EIM_DA8__GPIO3_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 (_MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 (_MX53_PAD_EIM_DA8__IPU_CSI1_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 (_MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 (_MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__GPIO3_9 (_MX53_PAD_EIM_DA9__GPIO3_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 (_MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 (_MX53_PAD_EIM_DA9__IPU_CSI1_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 (_MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 (_MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__GPIO3_10 (_MX53_PAD_EIM_DA10__GPIO3_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 (_MX53_PAD_EIM_DA10__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN (_MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 (_MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 (_MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__GPIO3_11 (_MX53_PAD_EIM_DA11__GPIO3_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 (_MX53_PAD_EIM_DA11__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC (_MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 (_MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__GPIO3_12 (_MX53_PAD_EIM_DA12__GPIO3_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 (_MX53_PAD_EIM_DA12__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC (_MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 (_MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__GPIO3_13 (_MX53_PAD_EIM_DA13__GPIO3_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS (_MX53_PAD_EIM_DA13__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 (_MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__GPIO3_14 (_MX53_PAD_EIM_DA14__GPIO3_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS (_MX53_PAD_EIM_DA14__IPU_DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK (_MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 (_MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__GPIO3_15 (_MX53_PAD_EIM_DA15__GPIO3_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 (_MX53_PAD_EIM_DA15__IPU_DI1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B (_MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WE_B__GPIO6_12 (_MX53_PAD_NANDF_WE_B__GPIO6_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B (_MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RE_B__GPIO6_13 (_MX53_PAD_NANDF_RE_B__GPIO6_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT (_MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_WAIT__GPIO5_0 (_MX53_PAD_EIM_WAIT__GPIO5_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B (_MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 (_MX53_PAD_LVDS1_TX3_P__GPIO6_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 (_MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 (_MX53_PAD_LVDS1_TX2_P__GPIO6_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 (_MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 (_MX53_PAD_LVDS1_CLK_P__GPIO6_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK (_MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 (_MX53_PAD_LVDS1_TX1_P__GPIO6_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 (_MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 (_MX53_PAD_LVDS1_TX0_P__GPIO6_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 (_MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 (_MX53_PAD_LVDS0_TX3_P__GPIO7_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 (_MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 (_MX53_PAD_LVDS0_CLK_P__GPIO7_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK (_MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 (_MX53_PAD_LVDS0_TX2_P__GPIO7_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 (_MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 (_MX53_PAD_LVDS0_TX1_P__GPIO7_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 (_MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 (_MX53_PAD_LVDS0_TX0_P__GPIO7_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 (_MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_10__GPIO4_0 (_MX53_PAD_GPIO_10__GPIO4_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_10__OSC32k_32K_OUT (_MX53_PAD_GPIO_10__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_11__GPIO4_1 (_MX53_PAD_GPIO_11__GPIO4_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_12__GPIO4_2 (_MX53_PAD_GPIO_12__GPIO4_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_13__GPIO4_3 (_MX53_PAD_GPIO_13__GPIO4_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_14__GPIO4_4 (_MX53_PAD_GPIO_14__GPIO4_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE (_MX53_PAD_NANDF_CLE__EMI_NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CLE__GPIO6_7 (_MX53_PAD_NANDF_CLE__GPIO6_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 (_MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE (_MX53_PAD_NANDF_ALE__EMI_NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_ALE__GPIO6_8 (_MX53_PAD_NANDF_ALE__GPIO6_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 (_MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B (_MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WP_B__GPIO6_9 (_MX53_PAD_NANDF_WP_B__GPIO6_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 (_MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 (_MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RB0__GPIO6_10 (_MX53_PAD_NANDF_RB0__GPIO6_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 (_MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 (_MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS0__GPIO6_11 (_MX53_PAD_NANDF_CS0__GPIO6_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 (_MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 (_MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__GPIO6_14 (_MX53_PAD_NANDF_CS1__GPIO6_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__MLB_MLBCLK (_MX53_PAD_NANDF_CS1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 (_MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 (_MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__GPIO6_15 (_MX53_PAD_NANDF_CS2__GPIO6_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__IPU_SISG_0 (_MX53_PAD_NANDF_CS2__IPU_SISG_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__ESAI1_TX0 (_MX53_PAD_NANDF_CS2__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE (_MX53_PAD_NANDF_CS2__EMI_WEIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK (_MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__MLB_MLBSIG (_MX53_PAD_NANDF_CS2__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 (_MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 (_MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__GPIO6_16 (_MX53_PAD_NANDF_CS3__GPIO6_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__IPU_SISG_1 (_MX53_PAD_NANDF_CS3__IPU_SISG_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__ESAI1_TX1 (_MX53_PAD_NANDF_CS3__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 (_MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__MLB_MLBDAT (_MX53_PAD_NANDF_CS3__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 (_MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__FEC_MDIO (_MX53_PAD_FEC_MDIO__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__GPIO1_22 (_MX53_PAD_FEC_MDIO__GPIO1_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__ESAI1_SCKR (_MX53_PAD_FEC_MDIO__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__FEC_COL (_MX53_PAD_FEC_MDIO__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 (_MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 (_MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 (_MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK (_MX53_PAD_FEC_REF_CLK__FEC_TX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__GPIO1_23 (_MX53_PAD_FEC_REF_CLK__GPIO1_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR (_MX53_PAD_FEC_REF_CLK__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 (_MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 (_MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__FEC_RX_ER (_MX53_PAD_FEC_RX_ER__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__GPIO1_24 (_MX53_PAD_FEC_RX_ER__GPIO1_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR (_MX53_PAD_FEC_RX_ER__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK (_MX53_PAD_FEC_RX_ER__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 (_MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV (_MX53_PAD_FEC_CRS_DV__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_CRS_DV__GPIO1_25 (_MX53_PAD_FEC_CRS_DV__GPIO1_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT (_MX53_PAD_FEC_CRS_DV__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 (_MX53_PAD_FEC_RXD1__FEC_RDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__GPIO1_26 (_MX53_PAD_FEC_RXD1__GPIO1_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__ESAI1_FST (_MX53_PAD_FEC_RXD1__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__MLB_MLBSIG (_MX53_PAD_FEC_RXD1__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 (_MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 (_MX53_PAD_FEC_RXD0__FEC_RDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__GPIO1_27 (_MX53_PAD_FEC_RXD0__GPIO1_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__ESAI1_HCKT (_MX53_PAD_FEC_RXD0__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT (_MX53_PAD_FEC_RXD0__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TX_EN__FEC_TX_EN (_MX53_PAD_FEC_TX_EN__FEC_TX_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TX_EN__GPIO1_28 (_MX53_PAD_FEC_TX_EN__GPIO1_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 (_MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 (_MX53_PAD_FEC_TXD1__FEC_TDATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__GPIO1_29 (_MX53_PAD_FEC_TXD1__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 (_MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__MLB_MLBCLK (_MX53_PAD_FEC_TXD1__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK (_MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 (_MX53_PAD_FEC_TXD0__FEC_TDATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__GPIO1_30 (_MX53_PAD_FEC_TXD0__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 (_MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 (_MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__FEC_MDC (_MX53_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__GPIO1_31 (_MX53_PAD_FEC_MDC__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 (_MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__MLB_MLBDAT (_MX53_PAD_FEC_MDC__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG (_MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 (_MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__PATA_DIOW (_MX53_PAD_PATA_DIOW__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__GPIO6_17 (_MX53_PAD_PATA_DIOW__GPIO6_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX (_MX53_PAD_PATA_DIOW__UART1_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 (_MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__PATA_DMACK (_MX53_PAD_PATA_DMACK__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__GPIO6_18 (_MX53_PAD_PATA_DMACK__GPIO6_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX (_MX53_PAD_PATA_DMACK__UART1_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 (_MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__PATA_DMARQ (_MX53_PAD_PATA_DMARQ__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__GPIO7_0 (_MX53_PAD_PATA_DMARQ__GPIO7_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX (_MX53_PAD_PATA_DMARQ__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 (_MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 (_MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN (_MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 (_MX53_PAD_PATA_BUFFER_EN__GPIO7_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX (_MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 (_MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 (_MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__PATA_INTRQ (_MX53_PAD_PATA_INTRQ__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__GPIO7_2 (_MX53_PAD_PATA_INTRQ__GPIO7_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__UART2_CTS (_MX53_PAD_PATA_INTRQ__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN (_MX53_PAD_PATA_INTRQ__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 (_MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 (_MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__PATA_DIOR (_MX53_PAD_PATA_DIOR__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__GPIO7_3 (_MX53_PAD_PATA_DIOR__GPIO7_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__UART2_RTS (_MX53_PAD_PATA_DIOR__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__CAN1_RXCAN (_MX53_PAD_PATA_DIOR__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 (_MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__PATA_DA_0 (_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__GPIO7_6 (_MX53_PAD_PATA_DA_0__GPIO7_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__ESDHC3_RST (_MX53_PAD_PATA_DA_0__ESDHC3_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__OWIRE_LINE (_MX53_PAD_PATA_DA_0__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 (_MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__PATA_DA_1 (_MX53_PAD_PATA_DA_1__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__GPIO7_7 (_MX53_PAD_PATA_DA_1__GPIO7_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__ESDHC4_CMD (_MX53_PAD_PATA_DA_1__ESDHC4_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__UART3_CTS (_MX53_PAD_PATA_DA_1__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 (_MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__PATA_DA_2 (_MX53_PAD_PATA_DA_2__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__GPIO7_8 (_MX53_PAD_PATA_DA_2__GPIO7_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__ESDHC4_CLK (_MX53_PAD_PATA_DA_2__ESDHC4_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__UART3_RTS (_MX53_PAD_PATA_DA_2__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 (_MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__PATA_CS_0 (_MX53_PAD_PATA_CS_0__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__GPIO7_9 (_MX53_PAD_PATA_CS_0__GPIO7_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX (_MX53_PAD_PATA_CS_0__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 (_MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__PATA_CS_1 (_MX53_PAD_PATA_CS_1__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__GPIO7_10 (_MX53_PAD_PATA_CS_1__GPIO7_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX (_MX53_PAD_PATA_CS_1__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 (_MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__PATA_DATA_0 (_MX53_PAD_PATA_DATA0__PATA_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__GPIO2_0 (_MX53_PAD_PATA_DATA0__GPIO2_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 (_MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 (_MX53_PAD_PATA_DATA0__ESDHC3_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 (_MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 (_MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 (_MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__PATA_DATA_1 (_MX53_PAD_PATA_DATA1__PATA_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__GPIO2_1 (_MX53_PAD_PATA_DATA1__GPIO2_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 (_MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 (_MX53_PAD_PATA_DATA1__ESDHC3_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 (_MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 (_MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__PATA_DATA_2 (_MX53_PAD_PATA_DATA2__PATA_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__GPIO2_2 (_MX53_PAD_PATA_DATA2__GPIO2_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 (_MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 (_MX53_PAD_PATA_DATA2__ESDHC3_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 (_MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 (_MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__PATA_DATA_3 (_MX53_PAD_PATA_DATA3__PATA_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__GPIO2_3 (_MX53_PAD_PATA_DATA3__GPIO2_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 (_MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 (_MX53_PAD_PATA_DATA3__ESDHC3_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 (_MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 (_MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__PATA_DATA_4 (_MX53_PAD_PATA_DATA4__PATA_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__GPIO2_4 (_MX53_PAD_PATA_DATA4__GPIO2_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 (_MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 (_MX53_PAD_PATA_DATA4__ESDHC4_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 (_MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 (_MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__PATA_DATA_5 (_MX53_PAD_PATA_DATA5__PATA_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__GPIO2_5 (_MX53_PAD_PATA_DATA5__GPIO2_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 (_MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 (_MX53_PAD_PATA_DATA5__ESDHC4_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 (_MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 (_MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__PATA_DATA_6 (_MX53_PAD_PATA_DATA6__PATA_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__GPIO2_6 (_MX53_PAD_PATA_DATA6__GPIO2_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 (_MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 (_MX53_PAD_PATA_DATA6__ESDHC4_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 (_MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 (_MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__PATA_DATA_7 (_MX53_PAD_PATA_DATA7__PATA_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__GPIO2_7 (_MX53_PAD_PATA_DATA7__GPIO2_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 (_MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 (_MX53_PAD_PATA_DATA7__ESDHC4_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 (_MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 (_MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__PATA_DATA_8 (_MX53_PAD_PATA_DATA8__PATA_DATA_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__GPIO2_8 (_MX53_PAD_PATA_DATA8__GPIO2_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 (_MX53_PAD_PATA_DATA8__ESDHC1_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 (_MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 (_MX53_PAD_PATA_DATA8__ESDHC3_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 (_MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 (_MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__PATA_DATA_9 (_MX53_PAD_PATA_DATA9__PATA_DATA_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__GPIO2_9 (_MX53_PAD_PATA_DATA9__GPIO2_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 (_MX53_PAD_PATA_DATA9__ESDHC1_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 (_MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 (_MX53_PAD_PATA_DATA9__ESDHC3_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 (_MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 (_MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__PATA_DATA_10 (_MX53_PAD_PATA_DATA10__PATA_DATA_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__GPIO2_10 (_MX53_PAD_PATA_DATA10__GPIO2_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 (_MX53_PAD_PATA_DATA10__ESDHC1_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 (_MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 (_MX53_PAD_PATA_DATA10__ESDHC3_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 (_MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 (_MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__PATA_DATA_11 (_MX53_PAD_PATA_DATA11__PATA_DATA_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__GPIO2_11 (_MX53_PAD_PATA_DATA11__GPIO2_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 (_MX53_PAD_PATA_DATA11__ESDHC1_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 (_MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 (_MX53_PAD_PATA_DATA11__ESDHC3_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 (_MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 (_MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__PATA_DATA_12 (_MX53_PAD_PATA_DATA12__PATA_DATA_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__GPIO2_12 (_MX53_PAD_PATA_DATA12__GPIO2_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 (_MX53_PAD_PATA_DATA12__ESDHC2_DAT4 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 (_MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 (_MX53_PAD_PATA_DATA12__ESDHC4_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 (_MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 (_MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__PATA_DATA_13 (_MX53_PAD_PATA_DATA13__PATA_DATA_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__GPIO2_13 (_MX53_PAD_PATA_DATA13__GPIO2_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 (_MX53_PAD_PATA_DATA13__ESDHC2_DAT5 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 (_MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 (_MX53_PAD_PATA_DATA13__ESDHC4_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 (_MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 (_MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__PATA_DATA_14 (_MX53_PAD_PATA_DATA14__PATA_DATA_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__GPIO2_14 (_MX53_PAD_PATA_DATA14__GPIO2_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 (_MX53_PAD_PATA_DATA14__ESDHC2_DAT6 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 (_MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 (_MX53_PAD_PATA_DATA14__ESDHC4_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 (_MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 (_MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__PATA_DATA_15 (_MX53_PAD_PATA_DATA15__PATA_DATA_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__GPIO2_15 (_MX53_PAD_PATA_DATA15__GPIO2_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 (_MX53_PAD_PATA_DATA15__ESDHC2_DAT7 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 (_MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 (_MX53_PAD_PATA_DATA15__ESDHC4_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 (_MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 (_MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 (_MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__GPIO1_16 (_MX53_PAD_SD1_DATA0__GPIO1_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 (_MX53_PAD_SD1_DATA0__GPT_CAPIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__CSPI_MISO (_MX53_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP (_MX53_PAD_SD1_DATA0__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 (_MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__GPIO1_17 (_MX53_PAD_SD1_DATA1__GPIO1_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 (_MX53_PAD_SD1_DATA1__GPT_CAPIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__CSPI_SS0 (_MX53_PAD_SD1_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP (_MX53_PAD_SD1_DATA1__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__ESDHC1_CMD (_MX53_PAD_SD1_CMD__ESDHC1_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__GPIO1_18 (_MX53_PAD_SD1_CMD__GPIO1_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 (_MX53_PAD_SD1_CMD__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__CSPI_MOSI (_MX53_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP (_MX53_PAD_SD1_CMD__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 (_MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__GPIO1_19 (_MX53_PAD_SD1_DATA2__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 (_MX53_PAD_SD1_DATA2__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__PWM2_PWMO (_MX53_PAD_SD1_DATA2__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__CSPI_SS1 (_MX53_PAD_SD1_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP (_MX53_PAD_SD1_DATA2__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__ESDHC1_CLK (_MX53_PAD_SD1_CLK__ESDHC1_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__GPIO1_20 (_MX53_PAD_SD1_CLK__GPIO1_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT (_MX53_PAD_SD1_CLK__OSC32k_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__GPT_CLKIN (_MX53_PAD_SD1_CLK__GPT_CLKIN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__CSPI_SCLK (_MX53_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 (_MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 (_MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__GPIO1_21 (_MX53_PAD_SD1_DATA3__GPIO1_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 (_MX53_PAD_SD1_DATA3__GPT_CMPOUT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__PWM1_PWMO (_MX53_PAD_SD1_DATA3__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__CSPI_SS2 (_MX53_PAD_SD1_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB (_MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 (_MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__ESDHC2_CLK (_MX53_PAD_SD2_CLK__ESDHC2_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__GPIO1_10 (_MX53_PAD_SD2_CLK__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__KPP_COL_5 (_MX53_PAD_SD2_CLK__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS (_MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__CSPI_SCLK (_MX53_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CLK__SCC_RANDOM_V (_MX53_PAD_SD2_CLK__SCC_RANDOM_V | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__ESDHC2_CMD (_MX53_PAD_SD2_CMD__ESDHC2_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__GPIO1_11 (_MX53_PAD_SD2_CMD__GPIO1_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__KPP_ROW_5 (_MX53_PAD_SD2_CMD__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC (_MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__CSPI_MOSI (_MX53_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_CMD__SCC_RANDOM (_MX53_PAD_SD2_CMD__SCC_RANDOM | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 (_MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__GPIO1_12 (_MX53_PAD_SD2_DATA3__GPIO1_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__KPP_COL_6 (_MX53_PAD_SD2_DATA3__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC (_MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__CSPI_SS2 (_MX53_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA3__SJC_DONE (_MX53_PAD_SD2_DATA3__SJC_DONE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 (_MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__GPIO1_13 (_MX53_PAD_SD2_DATA2__GPIO1_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__KPP_ROW_6 (_MX53_PAD_SD2_DATA2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD (_MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__CSPI_SS1 (_MX53_PAD_SD2_DATA2__CSPI_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA2__SJC_FAIL (_MX53_PAD_SD2_DATA2__SJC_FAIL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 (_MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__GPIO1_14 (_MX53_PAD_SD2_DATA1__GPIO1_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__KPP_COL_7 (_MX53_PAD_SD2_DATA1__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS (_MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__CSPI_SS0 (_MX53_PAD_SD2_DATA1__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO (_MX53_PAD_SD2_DATA1__RTIC_SEC_VIO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 (_MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__GPIO1_15 (_MX53_PAD_SD2_DATA0__GPIO1_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__KPP_ROW_7 (_MX53_PAD_SD2_DATA0__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD (_MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__CSPI_MISO (_MX53_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT (_MX53_PAD_SD2_DATA0__RTIC_DONE_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__CCM_CLKO (_MX53_PAD_GPIO_0__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__GPIO1_0 (_MX53_PAD_GPIO_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__KPP_COL_5 (_MX53_PAD_GPIO_0__KPP_COL_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK (_MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__EPIT1_EPITO (_MX53_PAD_GPIO_0__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB (_MX53_PAD_GPIO_0__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR (_MX53_PAD_GPIO_0__USBOH3_USBH1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_0__CSU_TD (_MX53_PAD_GPIO_0__CSU_TD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__ESAI1_SCKR (_MX53_PAD_GPIO_1__ESAI1_SCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__GPIO1_1 (_MX53_PAD_GPIO_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__KPP_ROW_5 (_MX53_PAD_GPIO_1__KPP_ROW_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK (_MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__PWM2_PWMO (_MX53_PAD_GPIO_1__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__WDOG2_WDOG_B (_MX53_PAD_GPIO_1__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__ESDHC1_CD (_MX53_PAD_GPIO_1__ESDHC1_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_1__SRC_TESTER_ACK (_MX53_PAD_GPIO_1__SRC_TESTER_ACK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__ESAI1_FSR (_MX53_PAD_GPIO_9__ESAI1_FSR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__GPIO1_9 (_MX53_PAD_GPIO_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__KPP_COL_6 (_MX53_PAD_GPIO_9__KPP_COL_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__CCM_REF_EN_B (_MX53_PAD_GPIO_9__CCM_REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__PWM1_PWMO (_MX53_PAD_GPIO_9__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__WDOG1_WDOG_B (_MX53_PAD_GPIO_9__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__ESDHC1_WP (_MX53_PAD_GPIO_9__ESDHC1_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC (_MX53_PAD_GPIO_3__USBOH3_USBH1_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__ESDHC2_LCTL (_MX53_PAD_GPIO_6__ESDHC2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_6__MLB_MLBSIG (_MX53_PAD_GPIO_6__MLB_MLBSIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__ESAI1_FST (_MX53_PAD_GPIO_2__ESAI1_FST | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__GPIO1_2 (_MX53_PAD_GPIO_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__KPP_ROW_6 (_MX53_PAD_GPIO_2__KPP_ROW_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 (_MX53_PAD_GPIO_2__CCM_CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 (_MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 (_MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__ESDHC2_WP (_MX53_PAD_GPIO_2__ESDHC2_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_2__MLB_MLBDAT (_MX53_PAD_GPIO_2__MLB_MLBDAT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__ESAI1_HCKT (_MX53_PAD_GPIO_4__ESAI1_HCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__GPIO1_4 (_MX53_PAD_GPIO_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__KPP_COL_7 (_MX53_PAD_GPIO_4__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 (_MX53_PAD_GPIO_4__CCM_CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 (_MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 (_MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__ESDHC2_CD (_MX53_PAD_GPIO_4__ESDHC2_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_4__SCC_SEC_STATE (_MX53_PAD_GPIO_4__SCC_SEC_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 (_MX53_PAD_GPIO_5__ESAI1_TX2_RX3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__GPIO1_5 (_MX53_PAD_GPIO_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__KPP_ROW_7 (_MX53_PAD_GPIO_5__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__EPIT1_EPITO (_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_GPIO_7__FIRI_RXD (_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__SPDIF_PLOCK (_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__CCM_PLL2_BYP (_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 (_MX53_PAD_GPIO_8__ESAI1_TX5_RX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__GPIO1_8 (_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__EPIT2_EPITO (_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
-#define MX53_PAD_GPIO_8__FIRI_TXD (_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__SPDIF_SRCLK (_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__CCM_PLL3_BYP (_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 (_MX53_PAD_GPIO_16__ESAI1_TX3_RX2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__GPIO7_11 (_MX53_PAD_GPIO_16__GPIO7_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
-#define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 (_MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__GPC_PMIC_RDY (_MX53_PAD_GPIO_17__GPC_PMIC_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG (_MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__SPDIF_OUT1 (_MX53_PAD_GPIO_17__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__IPU_SNOOP2 (_MX53_PAD_GPIO_17__IPU_SNOOP2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_17__SJC_JTAG_ACT (_MX53_PAD_GPIO_17__SJC_JTAG_ACT | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__ESAI1_TX1 (_MX53_PAD_GPIO_18__ESAI1_TX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__GPIO7_13 (_MX53_PAD_GPIO_18__GPIO7_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 (_MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__OWIRE_LINE (_MX53_PAD_GPIO_18__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG (_MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK (_MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__ESDHC1_LCTL (_MX53_PAD_GPIO_18__ESDHC1_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST (_MX53_PAD_GPIO_18__SRC_SYSTEM_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL \
+ IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 \
+ IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 \
+ IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 \
+ IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 \
+ IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 \
+ IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 \
+ IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 \
+ IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 \
+ IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 \
+ IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 \
+ IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 \
+ IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C)
+#define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL)
+#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
+#define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index ebbce33..2fa3b54 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -80,6 +80,7 @@
((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
+#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
/*
* Use to set PAD control
*/
@@ -89,11 +90,11 @@
#define PAD_CTL_HYS (1 << 8)
#define PAD_CTL_PKE (1 << 7)
-#define PAD_CTL_PUE (1 << 6)
-#define PAD_CTL_PUS_100K_DOWN (0 << 4)
-#define PAD_CTL_PUS_47K_UP (1 << 4)
-#define PAD_CTL_PUS_100K_UP (2 << 4)
-#define PAD_CTL_PUS_22K_UP (3 << 4)
+#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE)
+#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE)
+#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE)
#define PAD_CTL_ODE (1 << 3)
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 00e812b..fd9efb0 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -14,9 +14,15 @@
#include <asm-generic/gpio.h>
/*
- * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
+ * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC
+ * have 128 IRQs, and those with AVIC have 64.
+ *
+ * To support single image, the biggest number should be defined on
+ * top of the list.
*/
-#ifdef CONFIG_MXC_TZIC
+#if defined CONFIG_ARM_GIC
+#define MXC_INTERNAL_IRQS 160
+#elif defined CONFIG_MXC_TZIC
#define MXC_INTERNAL_IRQS 128
#else
#define MXC_INTERNAL_IRQS 64
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 087cd7a..ccebf5b 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -41,6 +41,7 @@
#define MX25_SSI2_BASE_ADDR 0x50014000
#define MX25_SSI1_BASE_ADDR 0x50034000
#define MX25_NFC_BASE_ADDR 0xbb000000
+#define MX25_IIM_BASE_ADDR 0x53ff0000
#define MX25_DRYICE_BASE_ADDR 0x53ffc000
#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
@@ -104,4 +105,8 @@
#define MX25_DMA_REQ_SSI1_RX0 28
#define MX25_DMA_REQ_SSI1_TX0 29
+#ifndef __ASSEMBLY__
+extern int mx25_revision(void);
+#endif
+
#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 1dc1c52..6265357 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
#ifndef __MACH_MX27_H__
#define __MACH_MX27_H__
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
#define MX27_AIPI_BASE_ADDR 0x10000000
#define MX27_AIPI_SIZE SZ_1M
#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
@@ -131,16 +127,6 @@
#define MX27_IO_P2V(x) IMX_IO_P2V(x)
#define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x))
-#ifndef __ASSEMBLER__
-static inline void mx27_setup_weimcs(size_t cs,
- unsigned upper, unsigned lower, unsigned addional)
-{
- __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
- __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
- __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
-}
-#endif
-
/* fixed interrupt numbers */
#define MX27_INT_I2C2 1
#define MX27_INT_GPT6 2
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 79e7fc0..e27619e 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,10 +1,6 @@
#ifndef __MACH_MX31_H__
#define __MACH_MX31_H__
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-
/*
* IRAM
*/
@@ -122,16 +118,6 @@
#define MX31_IO_P2V(x) IMX_IO_P2V(x)
#define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x))
-#ifndef __ASSEMBLER__
-static inline void mx31_setup_weimcs(size_t cs,
- unsigned upper, unsigned lower, unsigned addional)
-{
- __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
- __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
- __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
-}
-#endif
-
#define MX31_INT_I2C3 3
#define MX31_INT_I2C2 4
#define MX31_INT_MPEG4_ENCODER 5
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index d13dbfe..80965a9 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -36,7 +36,7 @@
#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
-#define MX35_ATA_DMA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_ATA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
#define MX35_FEC_BASE_ADDR 0x50038000
#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 388a407..30dbf42 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -187,22 +187,8 @@
/* Mandatory defines used globally */
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-extern unsigned int mx31_cpu_rev;
-extern void mx31_read_cpu_rev(void);
-
-static inline int mx31_revision(void)
-{
- return mx31_cpu_rev;
-}
-
-extern unsigned int mx35_cpu_rev;
-extern void mx35_read_cpu_rev(void);
-
-static inline int mx35_revision(void)
-{
- return mx35_cpu_rev;
-}
+extern int mx35_revision(void);
+extern int mx31_revision(void);
#endif
#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index dede19a..cdf07c6 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -18,18 +18,6 @@
#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
-#define MX51_DEBUG_BASE_ADDR 0x60000000
-#define MX51_DEBUG_SIZE SZ_1M
-
-#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000)
-#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000)
-#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000)
-#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000)
-#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000)
-#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000)
-#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000)
-#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000)
-
/*
* SPBA global module enabled #0
*/
@@ -55,7 +43,10 @@
#define MX51_AIPS1_BASE_ADDR 0x73f00000
#define MX51_AIPS1_SIZE SZ_1M
-#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_OTG_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0000)
+#define MX51_USB_HS1_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0200)
+#define MX51_USB_HS2_BASE_ADDR (MX51_USB_BASE_ADDR + 0x0400)
#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000)
#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000)
#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000)
@@ -132,6 +123,7 @@
#define MX51_GPU2D_BASE_ADDR 0xd0000000
#define MX51_TZIC_BASE_ADDR 0xe0000000
+#define MX51_TZIC_SIZE SZ_16K
#define MX51_IO_P2V(x) IMX_IO_P2V(x)
#define MX51_IO_ADDRESS(x) IOMEM(MX51_IO_P2V(x))
@@ -240,117 +232,114 @@
/*
* Interrupt numbers
*/
-#define MX51_MXC_INT_BASE 0
-#define MX51_MXC_INT_RESV0 0
+#define MX51_INT_BASE 0
+#define MX51_INT_RESV0 0
#define MX51_INT_ESDHC1 1
#define MX51_INT_ESDHC2 2
#define MX51_INT_ESDHC3 3
#define MX51_INT_ESDHC4 4
-#define MX51_MXC_INT_RESV5 5
+#define MX51_INT_RESV5 5
#define MX51_INT_SDMA 6
-#define MX51_MXC_INT_IOMUX 7
+#define MX51_INT_IOMUX 7
#define MX51_INT_NFC 8
-#define MX51_MXC_INT_VPU 9
+#define MX51_INT_VPU 9
#define MX51_INT_IPU_ERR 10
#define MX51_INT_IPU_SYN 11
-#define MX51_MXC_INT_GPU 12
-#define MX51_MXC_INT_RESV13 13
-#define MX51_MXC_INT_USB_H1 14
-#define MX51_MXC_INT_EMI 15
-#define MX51_MXC_INT_USB_H2 16
-#define MX51_MXC_INT_USB_H3 17
-#define MX51_MXC_INT_USB_OTG 18
-#define MX51_MXC_INT_SAHARA_H0 19
-#define MX51_MXC_INT_SAHARA_H1 20
-#define MX51_MXC_INT_SCC_SMN 21
-#define MX51_MXC_INT_SCC_STZ 22
-#define MX51_MXC_INT_SCC_SCM 23
-#define MX51_MXC_INT_SRTC_NTZ 24
-#define MX51_MXC_INT_SRTC_TZ 25
-#define MX51_MXC_INT_RTIC 26
-#define MX51_MXC_INT_CSU 27
-#define MX51_MXC_INT_SLIM_B 28
+#define MX51_INT_GPU 12
+#define MX51_INT_RESV13 13
+#define MX51_INT_USB_HS1 14
+#define MX51_INT_EMI 15
+#define MX51_INT_USB_HS2 16
+#define MX51_INT_USB_HS3 17
+#define MX51_INT_USB_OTG 18
+#define MX51_INT_SAHARA_H0 19
+#define MX51_INT_SAHARA_H1 20
+#define MX51_INT_SCC_SMN 21
+#define MX51_INT_SCC_STZ 22
+#define MX51_INT_SCC_SCM 23
+#define MX51_INT_SRTC_NTZ 24
+#define MX51_INT_SRTC_TZ 25
+#define MX51_INT_RTIC 26
+#define MX51_INT_CSU 27
+#define MX51_INT_SLIM_B 28
#define MX51_INT_SSI1 29
#define MX51_INT_SSI2 30
#define MX51_INT_UART1 31
#define MX51_INT_UART2 32
#define MX51_INT_UART3 33
-#define MX51_MXC_INT_RESV34 34
-#define MX51_MXC_INT_RESV35 35
+#define MX51_INT_RESV34 34
+#define MX51_INT_RESV35 35
#define MX51_INT_ECSPI1 36
#define MX51_INT_ECSPI2 37
#define MX51_INT_CSPI 38
-#define MX51_MXC_INT_GPT 39
-#define MX51_MXC_INT_EPIT1 40
-#define MX51_MXC_INT_EPIT2 41
-#define MX51_MXC_INT_GPIO1_INT7 42
-#define MX51_MXC_INT_GPIO1_INT6 43
-#define MX51_MXC_INT_GPIO1_INT5 44
-#define MX51_MXC_INT_GPIO1_INT4 45
-#define MX51_MXC_INT_GPIO1_INT3 46
-#define MX51_MXC_INT_GPIO1_INT2 47
-#define MX51_MXC_INT_GPIO1_INT1 48
-#define MX51_MXC_INT_GPIO1_INT0 49
-#define MX51_MXC_INT_GPIO1_LOW 50
-#define MX51_MXC_INT_GPIO1_HIGH 51
-#define MX51_MXC_INT_GPIO2_LOW 52
-#define MX51_MXC_INT_GPIO2_HIGH 53
-#define MX51_MXC_INT_GPIO3_LOW 54
-#define MX51_MXC_INT_GPIO3_HIGH 55
-#define MX51_MXC_INT_GPIO4_LOW 56
-#define MX51_MXC_INT_GPIO4_HIGH 57
-#define MX51_MXC_INT_WDOG1 58
-#define MX51_MXC_INT_WDOG2 59
+#define MX51_INT_GPT 39
+#define MX51_INT_EPIT1 40
+#define MX51_INT_EPIT2 41
+#define MX51_INT_GPIO1_INT7 42
+#define MX51_INT_GPIO1_INT6 43
+#define MX51_INT_GPIO1_INT5 44
+#define MX51_INT_GPIO1_INT4 45
+#define MX51_INT_GPIO1_INT3 46
+#define MX51_INT_GPIO1_INT2 47
+#define MX51_INT_GPIO1_INT1 48
+#define MX51_INT_GPIO1_INT0 49
+#define MX51_INT_GPIO1_LOW 50
+#define MX51_INT_GPIO1_HIGH 51
+#define MX51_INT_GPIO2_LOW 52
+#define MX51_INT_GPIO2_HIGH 53
+#define MX51_INT_GPIO3_LOW 54
+#define MX51_INT_GPIO3_HIGH 55
+#define MX51_INT_GPIO4_LOW 56
+#define MX51_INT_GPIO4_HIGH 57
+#define MX51_INT_WDOG1 58
+#define MX51_INT_WDOG2 59
#define MX51_INT_KPP 60
#define MX51_INT_PWM1 61
#define MX51_INT_I2C1 62
#define MX51_INT_I2C2 63
-#define MX51_MXC_INT_HS_I2C 64
-#define MX51_MXC_INT_RESV65 65
-#define MX51_MXC_INT_RESV66 66
-#define MX51_MXC_INT_SIM_IPB 67
-#define MX51_MXC_INT_SIM_DAT 68
-#define MX51_MXC_INT_IIM 69
-#define MX51_MXC_INT_ATA 70
-#define MX51_MXC_INT_CCM1 71
-#define MX51_MXC_INT_CCM2 72
-#define MX51_MXC_INT_GPC1 73
-#define MX51_MXC_INT_GPC2 74
-#define MX51_MXC_INT_SRC 75
-#define MX51_MXC_INT_NM 76
-#define MX51_MXC_INT_PMU 77
-#define MX51_MXC_INT_CTI_IRQ 78
-#define MX51_MXC_INT_CTI1_TG0 79
-#define MX51_MXC_INT_CTI1_TG1 80
-#define MX51_MXC_INT_MCG_ERR 81
-#define MX51_MXC_INT_MCG_TMR 82
-#define MX51_MXC_INT_MCG_FUNC 83
-#define MX51_MXC_INT_GPU2_IRQ 84
-#define MX51_MXC_INT_GPU2_BUSY 85
-#define MX51_MXC_INT_RESV86 86
+#define MX51_INT_HS_I2C 64
+#define MX51_INT_RESV65 65
+#define MX51_INT_RESV66 66
+#define MX51_INT_SIM_IPB 67
+#define MX51_INT_SIM_DAT 68
+#define MX51_INT_IIM 69
+#define MX51_INT_ATA 70
+#define MX51_INT_CCM1 71
+#define MX51_INT_CCM2 72
+#define MX51_INT_GPC1 73
+#define MX51_INT_GPC2 74
+#define MX51_INT_SRC 75
+#define MX51_INT_NM 76
+#define MX51_INT_PMU 77
+#define MX51_INT_CTI_IRQ 78
+#define MX51_INT_CTI1_TG0 79
+#define MX51_INT_CTI1_TG1 80
+#define MX51_INT_MCG_ERR 81
+#define MX51_INT_MCG_TMR 82
+#define MX51_INT_MCG_FUNC 83
+#define MX51_INT_GPU2_IRQ 84
+#define MX51_INT_GPU2_BUSY 85
+#define MX51_INT_RESV86 86
#define MX51_INT_FEC 87
-#define MX51_MXC_INT_OWIRE 88
-#define MX51_MXC_INT_CTI1_TG2 89
-#define MX51_MXC_INT_SJC 90
-#define MX51_MXC_INT_SPDIF 91
-#define MX51_MXC_INT_TVE 92
-#define MX51_MXC_INT_FIRI 93
+#define MX51_INT_OWIRE 88
+#define MX51_INT_CTI1_TG2 89
+#define MX51_INT_SJC 90
+#define MX51_INT_SPDIF 91
+#define MX51_INT_TVE 92
+#define MX51_INT_FIRI 93
#define MX51_INT_PWM2 94
-#define MX51_MXC_INT_SLIM_EXP 95
+#define MX51_INT_SLIM_EXP 95
#define MX51_INT_SSI3 96
-#define MX51_MXC_INT_EMI_BOOT 97
-#define MX51_MXC_INT_CTI1_TG3 98
-#define MX51_MXC_INT_SMC_RX 99
-#define MX51_MXC_INT_VPU_IDLE 100
-#define MX51_MXC_INT_EMI_NFC 101
-#define MX51_MXC_INT_GPU_IDLE 102
+#define MX51_INT_EMI_BOOT 97
+#define MX51_INT_CTI1_TG3 98
+#define MX51_INT_SMC_RX 99
+#define MX51_INT_VPU_IDLE 100
+#define MX51_INT_EMI_NFC 101
+#define MX51_INT_GPU_IDLE 102
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern int mx51_revision(void);
extern void mx51_display_revision(void);
#endif
-/* tape-out 1 defines */
-#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000
-
#endif /* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index 5e3c323..a37e8c3 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -9,6 +9,7 @@
/* TZIC */
#define MX53_TZIC_BASE_ADDR 0x0FFFC000
+#define MX53_TZIC_SIZE SZ_16K
/*
* AHCI SATA
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
new file mode 100644
index 0000000..254a561
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_MX6Q_H__
+#define __MACH_MX6Q_H__
+
+#define MX6Q_IO_P2V(x) IMX_IO_P2V(x)
+#define MX6Q_IO_ADDRESS(x) IOMEM(MX6Q_IO_P2V(x))
+
+/*
+ * The following are the blocks that need to be statically mapped.
+ * For other blocks, the base address really should be retrieved from
+ * device tree.
+ */
+#define MX6Q_SCU_BASE_ADDR 0x00a00000
+#define MX6Q_SCU_SIZE 0x1000
+#define MX6Q_CCM_BASE_ADDR 0x020c4000
+#define MX6Q_CCM_SIZE 0x4000
+#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
+#define MX6Q_ANATOP_SIZE 0x1000
+#define MX6Q_UART4_BASE_ADDR 0x021f0000
+#define MX6Q_UART4_SIZE 0x4000
+
+#endif /* __MACH_MX6Q_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 0987923..00a7819 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -183,13 +183,6 @@
};
int tzic_enable_wake(int is_idle);
-enum mxc_cpu_pwr_mode {
- WAIT_CLOCKED, /* wfi only */
- WAIT_UNCLOCKED, /* WAIT */
- WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
- STOP_POWER_ON, /* just STOP */
- STOP_POWER_OFF, /* STOP + SRPG */
-};
extern struct cpu_op *(*get_cpu_op)(int *op);
#endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 51f02a9..cf88b35 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -17,41 +17,12 @@
#ifndef __ASM_ARCH_MXC_SYSTEM_H__
#define __ASM_ARCH_MXC_SYSTEM_H__
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
static inline void arch_idle(void)
{
- /* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
- if (cpu_is_mx31() || cpu_is_mx35()) {
- unsigned long reg = 0;
- __asm__ __volatile__(
- /* disable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #0x00001000\n"
- "bic %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- /* invalidate I cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c5, 0\n"
- /* clear and invalidate D cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c14, 0\n"
- /* WFI */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c0, 4\n"
- "nop\n" "nop\n" "nop\n" "nop\n"
- "nop\n" "nop\n" "nop\n"
- /* enable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- : "=r" (reg));
- } else if (cpu_is_mx51())
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (imx_idle != NULL)
+ (imx_idle)();
else
cpu_do_idle();
}
diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c
index 96953e2..b6e1145 100644
--- a/arch/arm/plat-mxc/irq-common.c
+++ b/arch/arm/plat-mxc/irq-common.c
@@ -23,17 +23,17 @@
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
- struct mxc_irq_chip *chip;
- struct irq_chip *base;
+ struct irq_chip_generic *gc;
+ struct mxc_extra_irq *exirq;
int ret;
ret = -ENOSYS;
- base = irq_get_chip(irq);
- if (base) {
- chip = container_of(base, struct mxc_irq_chip, base);
- if (chip->set_priority)
- ret = chip->set_priority(irq, prio);
+ gc = irq_get_chip_data(irq);
+ if (gc && gc->private) {
+ exirq = gc->private;
+ if (exirq->set_priority)
+ ret = exirq->set_priority(irq, prio);
}
return ret;
@@ -43,15 +43,16 @@
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
{
struct irq_chip_generic *gc;
- int (*set_irq_fiq)(unsigned int, unsigned int);
+ struct mxc_extra_irq *exirq;
int ret;
ret = -ENOSYS;
gc = irq_get_chip_data(irq);
if (gc && gc->private) {
- set_irq_fiq = gc->private;
- ret = set_irq_fiq(irq, type);
+ exirq = gc->private;
+ if (exirq->set_irq_fiq)
+ ret = exirq->set_irq_fiq(irq, type);
}
return ret;
diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/plat-mxc/irq-common.h
index 7203543..6ccb3a1 100644
--- a/arch/arm/plat-mxc/irq-common.h
+++ b/arch/arm/plat-mxc/irq-common.h
@@ -19,9 +19,8 @@
#ifndef __PLAT_MXC_IRQ_COMMON_H__
#define __PLAT_MXC_IRQ_COMMON_H__
-struct mxc_irq_chip
+struct mxc_extra_irq
{
- struct irq_chip base;
int (*set_priority)(unsigned char irq, unsigned char prio);
int (*set_irq_fiq)(unsigned int irq, unsigned int type);
};
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 761c3c9..42d74ea 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -57,7 +57,7 @@
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
+ if (!(cpu_is_mx1() || cpu_is_mx21())) {
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
u32 cr;
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 8024f2a..9dad8dc 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -28,6 +28,9 @@
#include <asm/system.h>
#include <asm/mach-types.h>
+void (*imx_idle)(void) = NULL;
+void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+
static void __iomem *wdog_base;
/*
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index f257fcc..e993a18 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -42,7 +42,7 @@
#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
#define TZIC_PND0 0x0D00 /* Pending Register 0 */
-#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */
+#define TZIC_HIPND(i) (0x0D80+ ((i) << 2)) /* High Priority Pending Register */
#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
@@ -74,6 +74,12 @@
static unsigned int *wakeup_intr[4];
+static struct mxc_extra_irq tzic_extra_irq = {
+#ifdef CONFIG_FIQ
+ .set_irq_fiq = tzic_set_irq_fiq,
+#endif
+};
+
static __init void tzic_init_gc(unsigned int irq_start)
{
struct irq_chip_generic *gc;
@@ -82,7 +88,7 @@
gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base,
handle_level_irq);
- gc->private = tzic_set_irq_fiq;
+ gc->private = &tzic_extra_irq;
gc->wake_enabled = IRQ_MSK(32);
wakeup_intr[idx] = &gc->wake_active;
@@ -96,6 +102,28 @@
irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
}
+asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+{
+ u32 stat;
+ int i, irqofs, handled;
+
+ do {
+ handled = 0;
+
+ for (i = 0; i < 4; i++) {
+ stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
+ __raw_readl(tzic_base + TZIC_INTSEC0(i));
+
+ while (stat) {
+ handled = 1;
+ irqofs = fls(stat) - 1;
+ handle_IRQ(irqofs + i * 32, regs);
+ stat &= ~(1 << irqofs);
+ }
+ }
+ } while (handled);
+}
+
/*
* This function initializes the TZIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index ce65901..bca4914 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -15,10 +15,16 @@
config HAS_MTU
bool
- select HAVE_SCHED_CLOCK
help
Support for Multi Timer Unit. MTU provides access
to multiple interrupt generating programmable
32-bit free running decrementing counters.
+config NOMADIK_MTU_SCHED_CLOCK
+ bool
+ depends on HAS_MTU
+ select HAVE_SCHED_CLOCK
+ help
+ Use the Multi Timer Unit as the sched_clock.
+
endif
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 65704a3..6508e76 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,54 +1,11 @@
#ifndef __PLAT_MTU_H
#define __PLAT_MTU_H
-/*
- * Guaranteed runtime conversion range in seconds for
- * the clocksource and clockevent.
- */
-#define MTU_MIN_RANGE 4
-
/* should be set by the platform code */
extern void __iomem *mtu_base;
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
-#define MTU_RIS 0x04 /* Raw interrupt status */
-#define MTU_MIS 0x08 /* Masked interrupt status */
-#define MTU_ICR 0x0C /* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
-#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
-#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
-#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA 0x80
-#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK 0x0c
-#define MTU_CRn_PRESCALE_1 0x00
-#define MTU_CRn_PRESCALE_16 0x04
-#define MTU_CRn_PRESCALE_256 0x08
-#define MTU_CRn_32BITS 0x02
-#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR 0xff0
-#define MTU_ITOP 0xff4
-
-#define MTU_PERIPH_ID0 0xfe0
-#define MTU_PERIPH_ID1 0xfe4
-#define MTU_PERIPH_ID2 0xfe8
-#define MTU_PERIPH_ID3 0xfeC
-
-#define MTU_PCELL0 0xff0
-#define MTU_PCELL1 0xff4
-#define MTU_PCELL2 0xff8
-#define MTU_PCELL3 0xffC
+void nmdk_clkevt_reset(void);
+void nmdk_clksrc_reset(void);
#endif /* __PLAT_MTU_H */
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 05a3936..22cb97d 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -37,7 +37,6 @@
* SLPM value = same as normal
*
* PIN_CFG - default config with alternate function
- * PIN_CFG_PULL - default config with alternate function and pull up/down
*/
typedef unsigned long pin_cfg_t;
@@ -133,10 +132,6 @@
(PIN_CFG_DEFAULT |\
(PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
-#define PIN_CFG_PULL(num, alt, pull) \
- ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
- (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
-
extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ef74e157..30b6433 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -21,10 +21,59 @@
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
-#include <plat/mtu.h>
+/*
+ * Guaranteed runtime conversion range in seconds for
+ * the clocksource and clockevent.
+ */
+#define MTU_MIN_RANGE 4
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC 0x00 /* Interrupt mask set/clear */
+#define MTU_RIS 0x04 /* Raw interrupt status */
+#define MTU_MIS 0x08 /* Masked interrupt status */
+#define MTU_ICR 0x0C /* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
+#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
+#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
+#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA 0x80
+#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK 0x0c
+#define MTU_CRn_PRESCALE_1 0x00
+#define MTU_CRn_PRESCALE_16 0x04
+#define MTU_CRn_PRESCALE_256 0x08
+#define MTU_CRn_32BITS 0x02
+#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR 0xff0
+#define MTU_ITOP 0xff4
+
+#define MTU_PERIPH_ID0 0xfe0
+#define MTU_PERIPH_ID1 0xfe4
+#define MTU_PERIPH_ID2 0xfe8
+#define MTU_PERIPH_ID3 0xfeC
+
+#define MTU_PCELL0 0xff0
+#define MTU_PCELL1 0xff4
+#define MTU_PCELL2 0xff8
+#define MTU_PCELL3 0xffC
+
+static bool clkevt_periodic;
+static u32 clk_prescale;
+static u32 nmdk_cycle; /* write-once */
void __iomem *mtu_base; /* Assigned by machine code */
+#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
/*
* Override the global weak sched_clock symbol with this
* local implementation which uses the clocksource to get some
@@ -48,32 +97,56 @@
u32 cyc = -readl(mtu_base + MTU_VAL(0));
update_sched_clock(&cd, cyc, (u32)~0);
}
+#endif
/* Clockevent device: use one-shot mode */
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+ writel(1 << 1, mtu_base + MTU_IMSC);
+ writel(evt, mtu_base + MTU_LR(1));
+ /* Load highest value, enable device, enable interrupts */
+ writel(MTU_CRn_ONESHOT | clk_prescale |
+ MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(1));
+
+ return 0;
+}
+
+void nmdk_clkevt_reset(void)
+{
+ if (clkevt_periodic) {
+
+ /* Timer: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(1));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
+
+ writel(MTU_CRn_PERIODIC | clk_prescale |
+ MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(1));
+ writel(1 << 1, mtu_base + MTU_IMSC);
+ } else {
+ /* Generate an interrupt to start the clockevent again */
+ (void) nmdk_clkevt_next(nmdk_cycle, NULL);
+ }
+}
+
static void nmdk_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
- u32 cr;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- pr_err("%s: periodic mode not supported\n", __func__);
+ clkevt_periodic = true;
+ nmdk_clkevt_reset();
break;
case CLOCK_EVT_MODE_ONESHOT:
- /* Load highest value, enable device, enable interrupts */
- cr = readl(mtu_base + MTU_CR(1));
- writel(0, mtu_base + MTU_LR(1));
- writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
- writel(1 << 1, mtu_base + MTU_IMSC);
+ clkevt_periodic = false;
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
- /* disable irq */
writel(0, mtu_base + MTU_IMSC);
/* disable timer */
- cr = readl(mtu_base + MTU_CR(1));
- cr &= ~MTU_CRn_ENA;
- writel(cr, mtu_base + MTU_CR(1));
+ writel(0, mtu_base + MTU_CR(1));
/* load some high default value */
writel(0xffffffff, mtu_base + MTU_LR(1));
break;
@@ -82,16 +155,9 @@
}
}
-static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
-{
- /* writing the value has immediate effect */
- writel(evt, mtu_base + MTU_LR(1));
- return 0;
-}
-
static struct clock_event_device nmdk_clkevt = {
.name = "mtu_1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
.rating = 200,
.set_mode = nmdk_clkevt_mode,
.set_next_event = nmdk_clkevt_next,
@@ -116,11 +182,23 @@
.dev_id = &nmdk_clkevt,
};
+void nmdk_clksrc_reset(void)
+{
+ /* Disable */
+ writel(0, mtu_base + MTU_CR(0));
+
+ /* ClockSource: configure load and background-load, and fire it up */
+ writel(nmdk_cycle, mtu_base + MTU_LR(0));
+ writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+ writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+ mtu_base + MTU_CR(0));
+}
+
void __init nmdk_timer_init(void)
{
unsigned long rate;
struct clk *clk0;
- u32 cr = MTU_CRn_32BITS;
clk0 = clk_get_sys("mtu0", NULL);
BUG_ON(IS_ERR(clk0));
@@ -138,30 +216,28 @@
rate = clk_get_rate(clk0);
if (rate > 32000000) {
rate /= 16;
- cr |= MTU_CRn_PRESCALE_16;
+ clk_prescale = MTU_CRn_PRESCALE_16;
} else {
- cr |= MTU_CRn_PRESCALE_1;
+ clk_prescale = MTU_CRn_PRESCALE_1;
}
+ nmdk_cycle = (rate + HZ/2) / HZ;
+
+
/* Timer 0 is the free running clocksource */
- writel(cr, mtu_base + MTU_CR(0));
- writel(0, mtu_base + MTU_LR(0));
- writel(0, mtu_base + MTU_BGLR(0));
- writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+ nmdk_clksrc_reset();
if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
rate, 200, 32, clocksource_mmio_readl_down))
pr_err("timer: failed to initialize clock source %s\n",
"mtu_0");
-
+#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
-
+#endif
/* Timer 1 is used for events */
clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
- writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
-
nmdk_clkevt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
nmdk_clkevt.min_delta_ns =
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index c46c47a..1971932 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -25,54 +25,8 @@
#include <plat/board.h>
#include <plat/mmc.h>
#include <plat/menelaus.h>
-#include <plat/mcbsp.h>
#include <plat/omap44xx.h>
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_OMAP_MCBSP) || defined(CONFIG_OMAP_MCBSP_MODULE)
-
-static struct platform_device **omap_mcbsp_devices;
-
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{
- int i;
-
- omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
- GFP_KERNEL);
- if (!omap_mcbsp_devices) {
- printk(KERN_ERR "Could not register McBSP devices\n");
- return;
- }
-
- for (i = 0; i < size; i++) {
- struct platform_device *new_mcbsp;
- int ret;
-
- new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
- if (!new_mcbsp)
- continue;
- platform_device_add_resources(new_mcbsp, &res[i * res_count],
- res_count);
- new_mcbsp->dev.platform_data = &config[i];
- ret = platform_device_add(new_mcbsp);
- if (ret) {
- platform_device_put(new_mcbsp);
- continue;
- }
- omap_mcbsp_devices[i] = new_mcbsp;
- }
-}
-
-#else
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size)
-{ }
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 75a847d..2def4e1 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -3,6 +3,12 @@
*
* OMAP Dual-Mode Timers
*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * dmtimer adaptation to platform_driver.
+ *
* Copyright (C) 2005 Nokia Corporation
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
@@ -29,168 +35,80 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
#include <linux/io.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
#include <plat/dmtimer.h>
-#include <mach/irqs.h>
-static int dm_timer_count;
+static LIST_HEAD(omap_timer_list);
+static DEFINE_SPINLOCK(dm_timer_lock);
-#ifdef CONFIG_ARCH_OMAP1
-static struct omap_dm_timer omap1_dm_timers[] = {
- { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
- { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
- { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
- { .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
- { .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
- { .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
- { .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
- { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
-};
-
-static const int omap1_dm_timer_count = ARRAY_SIZE(omap1_dm_timers);
-
-#else
-#define omap1_dm_timers NULL
-#define omap1_dm_timer_count 0
-#endif /* CONFIG_ARCH_OMAP1 */
-
-#ifdef CONFIG_ARCH_OMAP2
-static struct omap_dm_timer omap2_dm_timers[] = {
- { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
-};
-
-static const char *omap2_dm_source_names[] __initdata = {
- "sys_ck",
- "func_32k_ck",
- "alt_ck",
- NULL
-};
-
-static struct clk *omap2_dm_source_clocks[3];
-static const int omap2_dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
-
-#else
-#define omap2_dm_timers NULL
-#define omap2_dm_timer_count 0
-#define omap2_dm_source_names NULL
-#define omap2_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_dm_timer omap3_dm_timers[] = {
- { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
- { .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 },
- { .phys_base = 0x49034000, .irq = INT_24XX_GPTIMER3 },
- { .phys_base = 0x49036000, .irq = INT_24XX_GPTIMER4 },
- { .phys_base = 0x49038000, .irq = INT_24XX_GPTIMER5 },
- { .phys_base = 0x4903A000, .irq = INT_24XX_GPTIMER6 },
- { .phys_base = 0x4903C000, .irq = INT_24XX_GPTIMER7 },
- { .phys_base = 0x4903E000, .irq = INT_24XX_GPTIMER8 },
- { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
-};
-
-static const char *omap3_dm_source_names[] __initdata = {
- "sys_ck",
- "omap_32k_fck",
- NULL
-};
-
-static struct clk *omap3_dm_source_clocks[2];
-static const int omap3_dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
-
-#else
-#define omap3_dm_timers NULL
-#define omap3_dm_timer_count 0
-#define omap3_dm_source_names NULL
-#define omap3_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#ifdef CONFIG_ARCH_OMAP4
-static struct omap_dm_timer omap4_dm_timers[] = {
- { .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 },
- { .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 },
- { .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 },
- { .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 },
- { .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 },
- { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 },
- { .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 },
- { .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 },
- { .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 },
- { .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 },
- { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
-};
-static const char *omap4_dm_source_names[] __initdata = {
- "sys_clkin_ck",
- "sys_32k_ck",
- NULL
-};
-static struct clk *omap4_dm_source_clocks[2];
-static const int omap4_dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
-
-#else
-#define omap4_dm_timers NULL
-#define omap4_dm_timer_count 0
-#define omap4_dm_source_names NULL
-#define omap4_dm_source_clocks NULL
-#endif /* CONFIG_ARCH_OMAP4 */
-
-static struct omap_dm_timer *dm_timers;
-static const char **dm_source_names;
-static struct clk **dm_source_clocks;
-
-static spinlock_t dm_timer_lock;
-
-/*
- * Reads timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode write pending bit must be
- * checked. Otherwise a read of a non completed write will produce an error.
+/**
+ * omap_dm_timer_read_reg - read timer registers in posted and non-posted mode
+ * @timer: timer pointer over which read operation to perform
+ * @reg: lowest byte holds the register offset
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode write
+ * pending bit must be checked. Otherwise a read of a non completed write
+ * will produce an error.
*/
static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg)
{
- return __omap_dm_timer_read(timer->io_base, reg, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ return __omap_dm_timer_read(timer, reg, timer->posted);
}
-/*
- * Writes timer registers in posted and non-posted mode. The posted mode bit
- * is encoded in reg. Note that in posted mode the write pending bit must be
- * checked. Otherwise a write on a register which has a pending write will be
- * lost.
+/**
+ * omap_dm_timer_write_reg - write timer registers in posted and non-posted mode
+ * @timer: timer pointer over which write operation is to perform
+ * @reg: lowest byte holds the register offset
+ * @value: data to write into the register
+ *
+ * The posted mode bit is encoded in reg. Note that in posted mode the write
+ * pending bit must be checked. Otherwise a write on a register which has a
+ * pending write will be lost.
*/
static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
u32 value)
{
- __omap_dm_timer_write(timer->io_base, reg, value, timer->posted);
+ WARN_ON((reg & 0xff) < _OMAP_TIMER_WAKEUP_EN_OFFSET);
+ __omap_dm_timer_write(timer, reg, value, timer->posted);
+}
+
+static void omap_timer_restore_context(struct omap_dm_timer *timer)
+{
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET,
+ timer->context.tiocp_cfg);
+ if (timer->revision > 1)
+ __raw_writel(timer->context.tistat, timer->sys_stat);
+
+ __raw_writel(timer->context.tisr, timer->irq_stat);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG,
+ timer->context.twer);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG,
+ timer->context.tcrr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG,
+ timer->context.tldr);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG,
+ timer->context.tmar);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG,
+ timer->context.tsicr);
+ __raw_writel(timer->context.tier, timer->irq_ena);
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG,
+ timer->context.tclr);
}
static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
{
int c;
+ if (!timer->sys_stat)
+ return;
+
c = 0;
- while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+ while (!(__raw_readl(timer->sys_stat) & 1)) {
c++;
if (c > 100000) {
printk(KERN_ERR "Timer failed to reset\n");
@@ -201,53 +119,65 @@
static void omap_dm_timer_reset(struct omap_dm_timer *timer)
{
- int autoidle = 0, wakeup = 0;
-
- if (!cpu_class_is_omap2() || timer != &dm_timers[0]) {
+ omap_dm_timer_enable(timer);
+ if (timer->pdev->id != 1) {
omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
omap_dm_timer_wait_for_reset(timer);
}
- omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
- /* Enable autoidle on OMAP2+ */
- if (cpu_class_is_omap2())
- autoidle = 1;
-
- /*
- * Enable wake-up on OMAP2 CPUs.
- */
- if (cpu_class_is_omap2())
- wakeup = 1;
-
- __omap_dm_timer_reset(timer->io_base, autoidle, wakeup);
+ __omap_dm_timer_reset(timer, 0, 0);
+ omap_dm_timer_disable(timer);
timer->posted = 1;
}
-void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+ int ret;
+
+ timer->fclk = clk_get(&timer->pdev->dev, "fck");
+ if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+ timer->fclk = NULL;
+ dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+ return -EINVAL;
+ }
+
+ if (pdata->needs_manual_reset)
+ omap_dm_timer_reset(timer);
+
+ ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+ timer->posted = 1;
+ return ret;
}
struct omap_dm_timer *omap_dm_timer_request(void)
{
- struct omap_dm_timer *timer = NULL;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
- int i;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- for (i = 0; i < dm_timer_count; i++) {
- if (dm_timers[i].reserved)
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->reserved)
continue;
- timer = &dm_timers[i];
+ timer = t;
timer->reserved = 1;
break;
}
+
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- if (timer != NULL)
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer request failed!\n", __func__);
return timer;
}
@@ -255,74 +185,65 @@
struct omap_dm_timer *omap_dm_timer_request_specific(int id)
{
- struct omap_dm_timer *timer;
+ struct omap_dm_timer *timer = NULL, *t;
unsigned long flags;
+ int ret = 0;
spin_lock_irqsave(&dm_timer_lock, flags);
- if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
- spin_unlock_irqrestore(&dm_timer_lock, flags);
- printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
- __FILE__, __LINE__, __func__, id);
- dump_stack();
- return NULL;
+ list_for_each_entry(t, &omap_timer_list, node) {
+ if (t->pdev->id == id && !t->reserved) {
+ timer = t;
+ timer->reserved = 1;
+ break;
+ }
}
- timer = &dm_timers[id-1];
- timer->reserved = 1;
+ if (timer) {
+ ret = omap_dm_timer_prepare(timer);
+ if (ret) {
+ timer->reserved = 0;
+ timer = NULL;
+ }
+ }
spin_unlock_irqrestore(&dm_timer_lock, flags);
- omap_dm_timer_prepare(timer);
+ if (!timer)
+ pr_debug("%s: timer%d request failed!\n", __func__, id);
return timer;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_request_specific);
-void omap_dm_timer_free(struct omap_dm_timer *timer)
+int omap_dm_timer_free(struct omap_dm_timer *timer)
{
- omap_dm_timer_enable(timer);
- omap_dm_timer_reset(timer);
- omap_dm_timer_disable(timer);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ clk_put(timer->fclk);
WARN_ON(!timer->reserved);
timer->reserved = 0;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_free);
void omap_dm_timer_enable(struct omap_dm_timer *timer)
{
- if (timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_enable(timer->fclk);
- clk_enable(timer->iclk);
- }
-#endif
-
- timer->enabled = 1;
+ pm_runtime_get_sync(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
void omap_dm_timer_disable(struct omap_dm_timer *timer)
{
- if (!timer->enabled)
- return;
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- clk_disable(timer->iclk);
- clk_disable(timer->fclk);
- }
-#endif
-
- timer->enabled = 0;
+ pm_runtime_put(&timer->pdev->dev);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
{
- return timer->irq;
+ if (timer)
+ return timer->irq;
+ return -EINVAL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_irq);
@@ -334,24 +255,29 @@
*/
__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
{
- int i;
+ int i = 0;
+ struct omap_dm_timer *timer = NULL;
+ unsigned long flags;
/* If ARMXOR cannot be idled this function call is unnecessary */
if (!(inputmask & (1 << 1)))
return inputmask;
/* If any active timer is using ARMXOR return modified mask */
- for (i = 0; i < dm_timer_count; i++) {
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node) {
u32 l;
- l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (l & OMAP_TIMER_CTRL_ST) {
if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
inputmask &= ~(1 << 1);
else
inputmask &= ~(1 << 2);
}
+ i++;
}
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
return inputmask;
}
@@ -361,7 +287,9 @@
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
- return timer->fclk;
+ if (timer)
+ return timer->fclk;
+ return NULL;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_get_fclk);
@@ -375,70 +303,91 @@
#endif
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
+int omap_dm_timer_trigger(struct omap_dm_timer *timer)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_trigger);
-void omap_dm_timer_start(struct omap_dm_timer *timer)
+int omap_dm_timer_start(struct omap_dm_timer *timer)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (!(l & OMAP_TIMER_CTRL_ST)) {
l |= OMAP_TIMER_CTRL_ST;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
}
+
+ /* Save the context */
+ timer->context.tclr = l;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_start);
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
+int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
+ struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
-#ifdef CONFIG_ARCH_OMAP2PLUS
- rate = clk_get_rate(timer->fclk);
-#endif
+ if (unlikely(!timer))
+ return -EINVAL;
- __omap_dm_timer_stop(timer->io_base, timer->posted, rate);
-}
-EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
+ if (!pdata->needs_manual_reset)
+ rate = clk_get_rate(timer->fclk);
-#ifdef CONFIG_ARCH_OMAP1
-
-int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
-{
- int n = (timer - dm_timers) << 1;
- u32 l;
-
- l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
- l |= source << n;
- omap_writel(l, MOD_CONF_CTRL_1);
+ __omap_dm_timer_stop(timer, timer->posted, rate);
return 0;
}
-EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-
-#else
+EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret;
+ struct dmtimer_platform_data *pdata;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ pdata = timer->pdev->dev.platform_data;
+
if (source < 0 || source >= 3)
return -EINVAL;
- return __omap_dm_timer_set_source(timer->fclk,
- dm_source_clocks[source]);
+ ret = pdata->set_timer_src(timer->pdev, source);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
-#endif
-
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload)
l |= OMAP_TIMER_CTRL_AR;
@@ -448,15 +397,32 @@
omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load);
/* Optimized set_load which removes costly spin wait in timer_start */
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
unsigned int load)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->loses_context) {
+ u32 ctx_loss_cnt_after =
+ timer->get_context_loss_count(&timer->pdev->dev);
+ if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ omap_timer_restore_context(timer);
+ }
+
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (autoreload) {
l |= OMAP_TIMER_CTRL_AR;
@@ -466,15 +432,25 @@
}
l |= OMAP_TIMER_CTRL_ST;
- __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted);
+ __omap_dm_timer_load_start(timer, l, load, timer->posted);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tldr = load;
+ timer->context.tcrr = load;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
unsigned int match)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
if (enable)
l |= OMAP_TIMER_CTRL_CE;
@@ -482,14 +458,24 @@
l &= ~OMAP_TIMER_CTRL_CE;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ timer->context.tmar = match;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
int toggle, int trigger)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
OMAP_TIMER_CTRL_PT | (0x03 << 10));
@@ -499,13 +485,22 @@
l |= OMAP_TIMER_CTRL_PT;
l |= trigger << 10;
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_pwm);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
{
u32 l;
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
if (prescaler >= 0x00 && prescaler <= 0x07) {
@@ -513,13 +508,28 @@
l |= prescaler << 2;
}
omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+
+ /* Save the context */
+ timer->context.tclr = l;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_int_enable(timer->io_base, value);
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+ __omap_dm_timer_int_enable(timer, value);
+
+ /* Save the context */
+ timer->context.tier = value;
+ timer->context.twer = value;
+ omap_dm_timer_disable(timer);
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
@@ -527,40 +537,61 @@
{
unsigned int l;
- l = omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return 0;
+ }
+
+ l = __raw_readl(timer->irq_stat);
return l;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_status);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
{
- __omap_dm_timer_write_status(timer->io_base, value);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev)))
+ return -EINVAL;
+
+ __omap_dm_timer_write_status(timer, value);
+ /* Save the context */
+ timer->context.tisr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_status);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
{
- return __omap_dm_timer_read_counter(timer->io_base, timer->posted);
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not iavailable or enabled.\n", __func__);
+ return 0;
+ }
+
+ return __omap_dm_timer_read_counter(timer, timer->posted);
}
EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
{
+ if (unlikely(!timer || pm_runtime_suspended(&timer->pdev->dev))) {
+ pr_err("%s: timer not available or enabled.\n", __func__);
+ return -EINVAL;
+ }
+
omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
+
+ /* Save the context */
+ timer->context.tcrr = value;
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_write_counter);
int omap_dm_timers_active(void)
{
- int i;
+ struct omap_dm_timer *timer;
- for (i = 0; i < dm_timer_count; i++) {
- struct omap_dm_timer *timer;
-
- timer = &dm_timers[i];
-
- if (!timer->enabled)
+ list_for_each_entry(timer, &omap_timer_list, node) {
+ if (!timer->reserved)
continue;
if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
@@ -572,69 +603,147 @@
}
EXPORT_SYMBOL_GPL(omap_dm_timers_active);
-static int __init omap_dm_timer_init(void)
+/**
+ * omap_dm_timer_probe - probe function called for every registered device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework at the end of device registration for all
+ * timer devices.
+ */
+static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
{
+ int ret;
+ unsigned long flags;
struct omap_dm_timer *timer;
- int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */
+ struct resource *mem, *irq, *ioarea;
+ struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
- if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
return -ENODEV;
-
- spin_lock_init(&dm_timer_lock);
-
- if (cpu_class_is_omap1()) {
- dm_timers = omap1_dm_timers;
- dm_timer_count = omap1_dm_timer_count;
- map_size = SZ_2K;
- } else if (cpu_is_omap24xx()) {
- dm_timers = omap2_dm_timers;
- dm_timer_count = omap2_dm_timer_count;
- dm_source_names = omap2_dm_source_names;
- dm_source_clocks = omap2_dm_source_clocks;
- } else if (cpu_is_omap34xx()) {
- dm_timers = omap3_dm_timers;
- dm_timer_count = omap3_dm_timer_count;
- dm_source_names = omap3_dm_source_names;
- dm_source_clocks = omap3_dm_source_clocks;
- } else if (cpu_is_omap44xx()) {
- dm_timers = omap4_dm_timers;
- dm_timer_count = omap4_dm_timer_count;
- dm_source_names = omap4_dm_source_names;
- dm_source_clocks = omap4_dm_source_clocks;
}
- if (cpu_class_is_omap2())
- for (i = 0; dm_source_names[i] != NULL; i++)
- dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
-
- if (cpu_is_omap243x())
- dm_timers[0].phys_base = 0x49018000;
-
- for (i = 0; i < dm_timer_count; i++) {
- timer = &dm_timers[i];
-
- /* Static mapping, never released */
- timer->io_base = ioremap(timer->phys_base, map_size);
- BUG_ON(!timer->io_base);
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if (cpu_class_is_omap2()) {
- char clk_name[16];
- sprintf(clk_name, "gpt%d_ick", i + 1);
- timer->iclk = clk_get(NULL, clk_name);
- sprintf(clk_name, "gpt%d_fck", i + 1);
- timer->fclk = clk_get(NULL, clk_name);
- }
-
- /* One or two timers may be set up early for sys_timer */
- if (sys_timer_reserved & (1 << i)) {
- timer->reserved = 1;
- timer->posted = 1;
- }
-#endif
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (unlikely(!irq)) {
+ dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+ return -ENODEV;
}
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!mem)) {
+ dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+ return -ENODEV;
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
+ return -EBUSY;
+ }
+
+ timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+ if (!timer) {
+ dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
+ __func__);
+ ret = -ENOMEM;
+ goto err_free_ioregion;
+ }
+
+ timer->io_base = ioremap(mem->start, resource_size(mem));
+ if (!timer->io_base) {
+ dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ timer->id = pdev->id;
+ timer->irq = irq->start;
+ timer->reserved = pdata->reserved;
+ timer->pdev = pdev;
+ timer->loses_context = pdata->loses_context;
+ timer->get_context_loss_count = pdata->get_context_loss_count;
+
+ /* Skip pm_runtime_enable for OMAP1 */
+ if (!pdata->needs_manual_reset) {
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
+ }
+
+ if (!timer->reserved) {
+ pm_runtime_get_sync(&pdev->dev);
+ __omap_dm_timer_init_regs(timer);
+ pm_runtime_put(&pdev->dev);
+ }
+
+ /* add the timer element to the list */
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_add_tail(&timer->node, &omap_timer_list);
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ dev_dbg(&pdev->dev, "Device Probed.\n");
+
return 0;
+
+err_free_mem:
+ kfree(timer);
+
+err_free_ioregion:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return ret;
}
-arch_initcall(omap_dm_timer_init);
+/**
+ * omap_dm_timer_remove - cleanup a registered timer device
+ * @pdev: pointer to current timer platform device
+ *
+ * Called by driver framework whenever a timer device is unregistered.
+ * In addition to freeing platform resources it also deletes the timer
+ * entry from the local list.
+ */
+static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
+{
+ struct omap_dm_timer *timer;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&dm_timer_lock, flags);
+ list_for_each_entry(timer, &omap_timer_list, node)
+ if (timer->pdev->id == pdev->id) {
+ list_del(&timer->node);
+ kfree(timer);
+ ret = 0;
+ break;
+ }
+ spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+ return ret;
+}
+
+static struct platform_driver omap_dm_timer_driver = {
+ .probe = omap_dm_timer_probe,
+ .remove = __devexit_p(omap_dm_timer_remove),
+ .driver = {
+ .name = "omap_timer",
+ },
+};
+
+static int __init omap_dm_timer_driver_init(void)
+{
+ return platform_driver_register(&omap_dm_timer_driver);
+}
+
+static void __exit omap_dm_timer_driver_exit(void)
+{
+ platform_driver_unregister(&omap_dm_timer_driver);
+}
+
+early_platform_init("earlytimer", &omap_dm_timer_driver);
+module_init(omap_dm_timer_driver_init);
+module_exit(omap_dm_timer_driver_exit);
+
+MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 3341ca4..679cbd4 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -108,6 +108,22 @@
res[1].start = INT_I2C;
pdata = &i2c_pdata[bus_id - 1];
+ /* all OMAP1 have IP version 1 register set */
+ pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+ /* all OMAP1 I2C are implemented like this */
+ pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+ /* how the cpu bus is wired up differs for 7xx only */
+
+ if (cpu_is_omap7xx())
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+ else
+ pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
return platform_device_register(pdev);
}
@@ -123,21 +139,14 @@
omap_pm_set_max_mpu_wakeup_lat(dev, t);
}
-static struct omap_device_pm_latency omap_i2c_latency[] = {
- [0] = {
- .deactivate_func = omap_device_idle_hwmods,
- .activate_func = omap_device_enable_hwmods,
- .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
- },
-};
-
static inline int omap2_i2c_add_bus(int bus_id)
{
int l;
struct omap_hwmod *oh;
- struct omap_device *od;
+ struct platform_device *pdev;
char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
struct omap_i2c_bus_platform_data *pdata;
+ struct omap_i2c_dev_attr *dev_attr;
omap2_i2c_mux_pins(bus_id);
@@ -152,6 +161,16 @@
pdata = &i2c_pdata[bus_id - 1];
/*
+ * pass the hwmod class's CPU-specific knowledge of I2C IP revision in
+ * use, and functionality implementation flags, up to the OMAP I2C
+ * driver via platform data
+ */
+ pdata->rev = oh->class->rev;
+
+ dev_attr = (struct omap_i2c_dev_attr *)oh->dev_attr;
+ pdata->flags = dev_attr->flags;
+
+ /*
* When waiting for completion of a i2c transfer, we need to
* set a wake up latency constraint for the MPU. This is to
* ensure quick enough wakeup from idle, when transfer
@@ -160,12 +179,12 @@
*/
if (cpu_is_omap34xx())
pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
- od = omap_device_build(name, bus_id, oh, pdata,
+ pdev = omap_device_build(name, bus_id, oh, pdata,
sizeof(struct omap_i2c_bus_platform_data),
- omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
- WARN(IS_ERR(od), "Could not build omap_device for %s\n", name);
+ NULL, 0, 0);
+ WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
- return PTR_ERR(od);
+ return PTR_ERR(pdev);
}
#else
static inline int omap2_i2c_add_bus(int bus_id)
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index df4b968..197ca03 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -80,8 +80,6 @@
*
* @div is the divisor that should be applied to the parent clock's rate
* to produce the current clock's rate.
- *
- * XXX @flags probably should be replaced with an struct omap_chip.
*/
struct clksel_rate {
u32 val;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 4564cc6..c50df48 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -45,6 +45,18 @@
extern void omap_reserve(void);
+void omap2420_init_early(void);
+void omap2430_init_early(void);
+void omap3430_init_early(void);
+void omap35xx_init_early(void);
+void omap3630_init_early(void);
+void omap3_init_early(void); /* Do not use this one */
+void am35xx_init_early(void);
+void ti816x_init_early(void);
+void omap4430_init_early(void);
+
+void omap_sram_init(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
@@ -53,13 +65,13 @@
struct omap_globals {
u32 class; /* OMAP class to detect */
void __iomem *tap; /* Control module ID code */
- unsigned long sdrc; /* SDRAM Controller */
- unsigned long sms; /* SDRAM Memory Scheduler */
- unsigned long ctrl; /* System Control Module */
- unsigned long ctrl_pad; /* PAD Control Module */
- unsigned long prm; /* Power and Reset Management */
- unsigned long cm; /* Clock Management */
- unsigned long cm2;
+ void __iomem *sdrc; /* SDRAM Controller */
+ void __iomem *sms; /* SDRAM Memory Scheduler */
+ void __iomem *ctrl; /* System Control Module */
+ void __iomem *ctrl_pad; /* PAD Control Module */
+ void __iomem *prm; /* Power and Reset Management */
+ void __iomem *cm; /* Clock Management */
+ void __iomem *cm2;
};
void omap2_set_globals_242x(void);
@@ -74,7 +86,11 @@
void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
+void omap242x_map_io(void);
+void omap243x_map_io(void);
void omap3_map_io(void);
+void omap4_map_io(void);
+
/**
* omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 67b3d75..2f90269 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -44,13 +44,6 @@
int omap_type(void);
-struct omap_chip_id {
- u16 oc;
- u8 type;
-};
-
-#define OMAP_CHIP_INIT(x) { .oc = x }
-
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
@@ -60,19 +53,6 @@
unsigned int omap_rev(void);
/*
- * Define CPU revision bits
- *
- * Verbose meaning of the revision bits may be different for a silicon
- * family. This difference can be handled separately.
- */
-#define OMAP_REVBITS_00 0x00
-#define OMAP_REVBITS_01 0x01
-#define OMAP_REVBITS_02 0x02
-#define OMAP_REVBITS_03 0x03
-#define OMAP_REVBITS_04 0x04
-#define OMAP_REVBITS_05 0x05
-
-/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
@@ -262,7 +242,7 @@
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3505, 0x3517)
IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
@@ -354,8 +334,9 @@
(!omap3_has_sgx()) && \
(omap3_has_iva()))
# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3505() is_omap3505()
# define cpu_is_omap3517() is_omap3517()
+# define cpu_is_omap3505() (cpu_is_omap3517() && \
+ !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti816x() is_ti816x()
@@ -379,35 +360,31 @@
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP2420_REV_ES1_0 OMAP242X_CLASS
-#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (OMAP_REVBITS_01 << 8))
+#define OMAP2420_REV_ES2_0 (OMAP242X_CLASS | (0x1 << 8))
#define OMAP243X_CLASS 0x24300024
#define OMAP2430_REV_ES1_0 OMAP243X_CLASS
#define OMAP343X_CLASS 0x34300034
#define OMAP3430_REV_ES1_0 OMAP343X_CLASS
-#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (OMAP_REVBITS_02 << 8))
-#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (OMAP_REVBITS_03 << 8))
-#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (OMAP_REVBITS_04 << 8))
-#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (OMAP_REVBITS_05 << 8))
+#define OMAP3430_REV_ES2_0 (OMAP343X_CLASS | (0x1 << 8))
+#define OMAP3430_REV_ES2_1 (OMAP343X_CLASS | (0x2 << 8))
+#define OMAP3430_REV_ES3_0 (OMAP343X_CLASS | (0x3 << 8))
+#define OMAP3430_REV_ES3_1 (OMAP343X_CLASS | (0x4 << 8))
+#define OMAP3430_REV_ES3_1_2 (OMAP343X_CLASS | (0x5 << 8))
#define OMAP363X_CLASS 0x36300034
#define OMAP3630_REV_ES1_0 OMAP363X_CLASS
-#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (OMAP_REVBITS_01 << 8))
-#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (OMAP_REVBITS_02 << 8))
+#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
+#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP35XX_CLASS 0x35000034
-#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
-#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
-#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
-#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
-#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
-#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+#define OMAP3517_CLASS 0x35170034
+#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
+#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
-#define TI8168_REV_ES1_1 (TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
#define OMAP443X_CLASS 0x44300044
#define OMAP4430_REV_ES1_0 (OMAP443X_CLASS | (0x10 << 8))
@@ -418,61 +395,6 @@
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type. CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420 (1 << 0)
-#define CHIP_IS_OMAP2430 (1 << 1)
-#define CHIP_IS_OMAP3430 (1 << 2)
-#define CHIP_IS_OMAP3430ES1 (1 << 3)
-#define CHIP_IS_OMAP3430ES2 (1 << 4)
-#define CHIP_IS_OMAP3430ES3_0 (1 << 5)
-#define CHIP_IS_OMAP3430ES3_1 (1 << 6)
-#define CHIP_IS_OMAP3630ES1 (1 << 7)
-#define CHIP_IS_OMAP4430ES1 (1 << 8)
-#define CHIP_IS_OMAP3630ES1_1 (1 << 9)
-#define CHIP_IS_OMAP3630ES1_2 (1 << 10)
-#define CHIP_IS_OMAP4430ES2 (1 << 11)
-#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
-#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
-#define CHIP_IS_TI816X (1 << 14)
-#define CHIP_IS_OMAP4460ES1_0 (1 << 15)
-
-#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
- CHIP_IS_OMAP4430ES2 | \
- CHIP_IS_OMAP4430ES2_1 | \
- CHIP_IS_OMAP4430ES2_2 | \
- CHIP_IS_OMAP4460ES1_0)
-
-/*
- * "GE" here represents "greater than or equal to" in terms of ES
- * levels. So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
- * chips at ES2 and beyond, but not, for example, any OMAP lines after
- * OMAP3.
- */
-#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \
- CHIP_IS_OMAP3430ES3_0 | \
- CHIP_GE_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1 | \
- CHIP_IS_OMAP3630ES1 | \
- CHIP_GE_OMAP3630ES1_1)
-#define CHIP_GE_OMAP3630ES1_1 (CHIP_IS_OMAP3630ES1_1 | \
- CHIP_IS_OMAP3630ES1_2)
-
-int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
/*
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index eb5d16c..d11025e 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -1,5 +1,5 @@
/*
- * arch/arm/plat-omap/include/mach/dmtimer.h
+ * arch/arm/plat-omap/include/plat/dmtimer.h
*
* OMAP Dual-Mode Timers
*
@@ -35,6 +35,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#ifndef __ASM_ARCH_DMTIMER_H
#define __ASM_ARCH_DMTIMER_H
@@ -59,12 +60,56 @@
* in OMAP4 can be distinguished.
*/
#define OMAP_TIMER_IP_VERSION_1 0x1
+
+/* timer capabilities used in hwmod database */
+#define OMAP_TIMER_SECURE 0x80000000
+#define OMAP_TIMER_ALWON 0x40000000
+#define OMAP_TIMER_HAS_PWM 0x20000000
+
+struct omap_timer_capability_dev_attr {
+ u32 timer_capability;
+};
+
struct omap_dm_timer;
struct clk;
+struct timer_regs {
+ u32 tidr;
+ u32 tiocp_cfg;
+ u32 tistat;
+ u32 tisr;
+ u32 tier;
+ u32 twer;
+ u32 tclr;
+ u32 tcrr;
+ u32 tldr;
+ u32 ttrg;
+ u32 twps;
+ u32 tmar;
+ u32 tcar1;
+ u32 tsicr;
+ u32 tcar2;
+ u32 tpir;
+ u32 tnir;
+ u32 tcvr;
+ u32 tocr;
+ u32 towr;
+};
+
+struct dmtimer_platform_data {
+ int (*set_timer_src)(struct platform_device *pdev, int source);
+ int timer_ip_version;
+ u32 needs_manual_reset:1;
+ bool reserved;
+
+ bool loses_context;
+
+ u32 (*get_context_loss_count)(struct device *dev);
+};
+
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
-void omap_dm_timer_free(struct omap_dm_timer *timer);
+int omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_enable(struct omap_dm_timer *timer);
void omap_dm_timer_disable(struct omap_dm_timer *timer);
@@ -73,23 +118,23 @@
u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
-void omap_dm_timer_trigger(struct omap_dm_timer *timer);
-void omap_dm_timer_start(struct omap_dm_timer *timer);
-void omap_dm_timer_stop(struct omap_dm_timer *timer);
+int omap_dm_timer_trigger(struct omap_dm_timer *timer);
+int omap_dm_timer_start(struct omap_dm_timer *timer);
+int omap_dm_timer_stop(struct omap_dm_timer *timer);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
-void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
-void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+int omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+int omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
int omap_dm_timers_active(void);
@@ -98,12 +143,30 @@
* used by dmtimer.c and sys_timer related code.
*/
-/* register offsets */
-#define _OMAP_TIMER_ID_OFFSET 0x00
-#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10
-#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14
-#define _OMAP_TIMER_STAT_OFFSET 0x18
-#define _OMAP_TIMER_INT_EN_OFFSET 0x1c
+/*
+ * The interrupt registers are different between v1 and v2 ip.
+ * These registers are offsets from timer->iobase.
+ */
+#define OMAP_TIMER_ID_OFFSET 0x00
+#define OMAP_TIMER_OCP_CFG_OFFSET 0x10
+
+#define OMAP_TIMER_V1_SYS_STAT_OFFSET 0x14
+#define OMAP_TIMER_V1_STAT_OFFSET 0x18
+#define OMAP_TIMER_V1_INT_EN_OFFSET 0x1c
+
+#define OMAP_TIMER_V2_IRQSTATUS_RAW 0x24
+#define OMAP_TIMER_V2_IRQSTATUS 0x28
+#define OMAP_TIMER_V2_IRQENABLE_SET 0x2c
+#define OMAP_TIMER_V2_IRQENABLE_CLR 0x30
+
+/*
+ * The functional registers have a different base on v1 and v2 ip.
+ * These registers are offsets from timer->func_base. The func_base
+ * is samae as io_base for v1 and io_base + 0x14 for v2 ip.
+ *
+ */
+#define OMAP_TIMER_V2_FUNC_OFFSET 0x14
+
#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20
#define _OMAP_TIMER_CTRL_OFFSET 0x24
#define OMAP_TIMER_CTRL_GPOCFG (1 << 14)
@@ -147,21 +210,6 @@
/* register offsets with the write pending bit encoded */
#define WPSHIFT 16
-#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \
- | (WP_NONE << WPSHIFT))
-
-#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \
- | (WP_NONE << WPSHIFT))
-
#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \
| (WP_NONE << WPSHIFT))
@@ -209,49 +257,88 @@
struct omap_dm_timer {
unsigned long phys_base;
+ int id;
int irq;
-#ifdef CONFIG_ARCH_OMAP2PLUS
struct clk *iclk, *fclk;
-#endif
- void __iomem *io_base;
+
+ void __iomem *io_base;
+ void __iomem *sys_stat; /* TISTAT timer status */
+ void __iomem *irq_stat; /* TISR/IRQSTATUS interrupt status */
+ void __iomem *irq_ena; /* irq enable */
+ void __iomem *irq_dis; /* irq disable, only on v2 ip */
+ void __iomem *pend; /* write pending */
+ void __iomem *func_base; /* function register base */
+
unsigned long rate;
unsigned reserved:1;
- unsigned enabled:1;
unsigned posted:1;
+ struct timer_regs context;
+ bool loses_context;
+ int ctx_loss_count;
+ int revision;
+ struct platform_device *pdev;
+ struct list_head node;
+
+ u32 (*get_context_loss_count)(struct device *dev);
};
-extern u32 sys_timer_reserved;
-void omap_dm_timer_prepare(struct omap_dm_timer *timer);
+int omap_dm_timer_prepare(struct omap_dm_timer *timer);
-static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg,
+static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- return __raw_readl(base + (reg & 0xff));
+ return __raw_readl(timer->func_base + (reg & 0xff));
}
-static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val,
- int posted)
+static inline void __omap_dm_timer_write(struct omap_dm_timer *timer,
+ u32 reg, u32 val, int posted)
{
if (posted)
- while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff))
- & (reg >> WPSHIFT))
+ while (__raw_readl(timer->pend) & (reg >> WPSHIFT))
cpu_relax();
- __raw_writel(val, base + (reg & 0xff));
+ __raw_writel(val, timer->func_base + (reg & 0xff));
+}
+
+static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
+{
+ u32 tidr;
+
+ /* Assume v1 ip if bits [31:16] are zero */
+ tidr = __raw_readl(timer->io_base);
+ if (!(tidr >> 16)) {
+ timer->revision = 1;
+ timer->sys_stat = timer->io_base +
+ OMAP_TIMER_V1_SYS_STAT_OFFSET;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
+ timer->irq_dis = 0;
+ timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
+ timer->func_base = timer->io_base;
+ } else {
+ timer->revision = 2;
+ timer->sys_stat = 0;
+ timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
+ timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
+ timer->pend = timer->io_base +
+ _OMAP_TIMER_WRITE_PEND_OFFSET +
+ OMAP_TIMER_V2_FUNC_OFFSET;
+ timer->func_base = timer->io_base + OMAP_TIMER_V2_FUNC_OFFSET;
+ }
}
/* Assumes the source clock has been set by caller */
-static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle,
- int wakeup)
+static inline void __omap_dm_timer_reset(struct omap_dm_timer *timer,
+ int autoidle, int wakeup)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0);
+ l = __raw_readl(timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
l |= 0x02 << 3; /* Set to smart-idle mode */
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
@@ -261,10 +348,10 @@
if (wakeup)
l |= 1 << 2;
- __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0);
+ __raw_writel(l, timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
/* Match hardware reset default of posted mode */
- __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG,
+ __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
OMAP_TIMER_CTRL_POSTED, 0);
}
@@ -286,18 +373,18 @@
return ret;
}
-static inline void __omap_dm_timer_stop(void __iomem *base, int posted,
- unsigned long rate)
+static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer,
+ int posted, unsigned long rate)
{
u32 l;
- l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ l = __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
if (l & OMAP_TIMER_CTRL_ST) {
l &= ~0x1;
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, l, posted);
#ifdef CONFIG_ARCH_OMAP2PLUS
/* Readback to make sure write has completed */
- __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted);
+ __omap_dm_timer_read(timer, OMAP_TIMER_CTRL_REG, posted);
/*
* Wait for functional clock period x 3.5 to make sure that
* timer is stopped
@@ -307,34 +394,34 @@
}
/* Ack possibly pending interrupt */
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG,
- OMAP_TIMER_INT_OVERFLOW, 0);
+ __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat);
}
-static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl,
- unsigned int load, int posted)
+static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer,
+ u32 ctrl, unsigned int load,
+ int posted)
{
- __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted);
- __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_COUNTER_REG, load, posted);
+ __omap_dm_timer_write(timer, OMAP_TIMER_CTRL_REG, ctrl, posted);
}
-static inline void __omap_dm_timer_int_enable(void __iomem *base,
+static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0);
- __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
+ __raw_writel(value, timer->irq_ena);
+ __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0);
}
-static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base,
- int posted)
+static inline unsigned int
+__omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted)
{
- return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted);
+ return __omap_dm_timer_read(timer, OMAP_TIMER_COUNTER_REG, posted);
}
-static inline void __omap_dm_timer_write_status(void __iomem *base,
+static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer,
unsigned int value)
{
- __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0);
+ __raw_writel(value, timer->irq_stat);
}
#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index ebe67ea..7f2969e 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -228,13 +228,13 @@
#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
/* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_EMIF2_SIZE SZ_1M
+#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
/* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_VIRT (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
#define OMAP44XX_DMM_SIZE SZ_1M
+#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
/*
* ----------------------------------------------------------------------------
* Omap specific register access
@@ -247,6 +247,8 @@
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
+void omap_ioremap_init(void);
+
extern u8 omap_readb(u32 pa);
extern u16 omap_readw(u32 pa);
extern u32 omap_readl(u32 pa);
@@ -256,8 +258,31 @@
struct omap_sdrc_params;
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap15xx_map_io(void);
+#else
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+void omap1_init_early(void);
#ifdef CONFIG_SOC_OMAP2420
extern void omap242x_map_common_io(void);
@@ -300,7 +325,7 @@
#endif
extern void omap2_init_common_infrastructure(void);
-extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap omap_ioremap
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 9882c65..8fa74e2 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -25,9 +25,7 @@
#define __ASM_ARCH_OMAP_MCBSP_H
#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <plat/clock.h>
+#include <linux/clk.h>
/* macro for building platform_device for McBSP ports */
#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
@@ -40,104 +38,60 @@
#define MCBSP_CONFIG_TYPE3 0x3
#define MCBSP_CONFIG_TYPE4 0x4
-#define OMAP7XX_MCBSP1_BASE 0xfffb1000
-#define OMAP7XX_MCBSP2_BASE 0xfffb1800
+/* McBSP register numbers. Register address offset = num * reg_step */
+enum {
+ /* Common registers */
+ OMAP_MCBSP_REG_SPCR2 = 4,
+ OMAP_MCBSP_REG_SPCR1,
+ OMAP_MCBSP_REG_RCR2,
+ OMAP_MCBSP_REG_RCR1,
+ OMAP_MCBSP_REG_XCR2,
+ OMAP_MCBSP_REG_XCR1,
+ OMAP_MCBSP_REG_SRGR2,
+ OMAP_MCBSP_REG_SRGR1,
+ OMAP_MCBSP_REG_MCR2,
+ OMAP_MCBSP_REG_MCR1,
+ OMAP_MCBSP_REG_RCERA,
+ OMAP_MCBSP_REG_RCERB,
+ OMAP_MCBSP_REG_XCERA,
+ OMAP_MCBSP_REG_XCERB,
+ OMAP_MCBSP_REG_PCR0,
+ OMAP_MCBSP_REG_RCERC,
+ OMAP_MCBSP_REG_RCERD,
+ OMAP_MCBSP_REG_XCERC,
+ OMAP_MCBSP_REG_XCERD,
+ OMAP_MCBSP_REG_RCERE,
+ OMAP_MCBSP_REG_RCERF,
+ OMAP_MCBSP_REG_XCERE,
+ OMAP_MCBSP_REG_XCERF,
+ OMAP_MCBSP_REG_RCERG,
+ OMAP_MCBSP_REG_RCERH,
+ OMAP_MCBSP_REG_XCERG,
+ OMAP_MCBSP_REG_XCERH,
-#define OMAP1510_MCBSP1_BASE 0xe1011800
-#define OMAP1510_MCBSP2_BASE 0xfffb1000
-#define OMAP1510_MCBSP3_BASE 0xe1017000
+ /* OMAP1-OMAP2420 registers */
+ OMAP_MCBSP_REG_DRR2 = 0,
+ OMAP_MCBSP_REG_DRR1,
+ OMAP_MCBSP_REG_DXR2,
+ OMAP_MCBSP_REG_DXR1,
-#define OMAP1610_MCBSP1_BASE 0xe1011800
-#define OMAP1610_MCBSP2_BASE 0xfffb1000
-#define OMAP1610_MCBSP3_BASE 0xe1017000
+ /* OMAP2430 and onwards */
+ OMAP_MCBSP_REG_DRR = 0,
+ OMAP_MCBSP_REG_DXR = 2,
+ OMAP_MCBSP_REG_SYSCON = 35,
+ OMAP_MCBSP_REG_THRSH2,
+ OMAP_MCBSP_REG_THRSH1,
+ OMAP_MCBSP_REG_IRQST = 40,
+ OMAP_MCBSP_REG_IRQEN,
+ OMAP_MCBSP_REG_WAKEUPEN,
+ OMAP_MCBSP_REG_XCCR,
+ OMAP_MCBSP_REG_RCCR,
+ OMAP_MCBSP_REG_XBUFFSTAT,
+ OMAP_MCBSP_REG_RBUFFSTAT,
+ OMAP_MCBSP_REG_SSELCR,
+};
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x02
-#define OMAP_MCBSP_REG_DXR2 0x04
-#define OMAP_MCBSP_REG_DXR1 0x06
-#define OMAP_MCBSP_REG_DRR 0x02
-#define OMAP_MCBSP_REG_DXR 0x06
-#define OMAP_MCBSP_REG_SPCR2 0x08
-#define OMAP_MCBSP_REG_SPCR1 0x0a
-#define OMAP_MCBSP_REG_RCR2 0x0c
-#define OMAP_MCBSP_REG_RCR1 0x0e
-#define OMAP_MCBSP_REG_XCR2 0x10
-#define OMAP_MCBSP_REG_XCR1 0x12
-#define OMAP_MCBSP_REG_SRGR2 0x14
-#define OMAP_MCBSP_REG_SRGR1 0x16
-#define OMAP_MCBSP_REG_MCR2 0x18
-#define OMAP_MCBSP_REG_MCR1 0x1a
-#define OMAP_MCBSP_REG_RCERA 0x1c
-#define OMAP_MCBSP_REG_RCERB 0x1e
-#define OMAP_MCBSP_REG_XCERA 0x20
-#define OMAP_MCBSP_REG_XCERB 0x22
-#define OMAP_MCBSP_REG_PCR0 0x24
-#define OMAP_MCBSP_REG_RCERC 0x26
-#define OMAP_MCBSP_REG_RCERD 0x28
-#define OMAP_MCBSP_REG_XCERC 0x2A
-#define OMAP_MCBSP_REG_XCERD 0x2C
-#define OMAP_MCBSP_REG_RCERE 0x2E
-#define OMAP_MCBSP_REG_RCERF 0x30
-#define OMAP_MCBSP_REG_XCERE 0x32
-#define OMAP_MCBSP_REG_XCERF 0x34
-#define OMAP_MCBSP_REG_RCERG 0x36
-#define OMAP_MCBSP_REG_RCERH 0x38
-#define OMAP_MCBSP_REG_XCERG 0x3A
-#define OMAP_MCBSP_REG_XCERH 0x3C
-
-/* Dummy defines, these are not available on omap1 */
-#define OMAP_MCBSP_REG_XCCR 0x00
-#define OMAP_MCBSP_REG_RCCR 0x00
-
-#else
-
-#define OMAP_MCBSP_REG_DRR2 0x00
-#define OMAP_MCBSP_REG_DRR1 0x04
-#define OMAP_MCBSP_REG_DXR2 0x08
-#define OMAP_MCBSP_REG_DXR1 0x0C
-#define OMAP_MCBSP_REG_DRR 0x00
-#define OMAP_MCBSP_REG_DXR 0x08
-#define OMAP_MCBSP_REG_SPCR2 0x10
-#define OMAP_MCBSP_REG_SPCR1 0x14
-#define OMAP_MCBSP_REG_RCR2 0x18
-#define OMAP_MCBSP_REG_RCR1 0x1C
-#define OMAP_MCBSP_REG_XCR2 0x20
-#define OMAP_MCBSP_REG_XCR1 0x24
-#define OMAP_MCBSP_REG_SRGR2 0x28
-#define OMAP_MCBSP_REG_SRGR1 0x2C
-#define OMAP_MCBSP_REG_MCR2 0x30
-#define OMAP_MCBSP_REG_MCR1 0x34
-#define OMAP_MCBSP_REG_RCERA 0x38
-#define OMAP_MCBSP_REG_RCERB 0x3C
-#define OMAP_MCBSP_REG_XCERA 0x40
-#define OMAP_MCBSP_REG_XCERB 0x44
-#define OMAP_MCBSP_REG_PCR0 0x48
-#define OMAP_MCBSP_REG_RCERC 0x4C
-#define OMAP_MCBSP_REG_RCERD 0x50
-#define OMAP_MCBSP_REG_XCERC 0x54
-#define OMAP_MCBSP_REG_XCERD 0x58
-#define OMAP_MCBSP_REG_RCERE 0x5C
-#define OMAP_MCBSP_REG_RCERF 0x60
-#define OMAP_MCBSP_REG_XCERE 0x64
-#define OMAP_MCBSP_REG_XCERF 0x68
-#define OMAP_MCBSP_REG_RCERG 0x6C
-#define OMAP_MCBSP_REG_RCERH 0x70
-#define OMAP_MCBSP_REG_XCERG 0x74
-#define OMAP_MCBSP_REG_XCERH 0x78
-#define OMAP_MCBSP_REG_SYSCON 0x8C
-#define OMAP_MCBSP_REG_THRSH2 0x90
-#define OMAP_MCBSP_REG_THRSH1 0x94
-#define OMAP_MCBSP_REG_IRQST 0xA0
-#define OMAP_MCBSP_REG_IRQEN 0xA4
-#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
-#define OMAP_MCBSP_REG_XCCR 0xAC
-#define OMAP_MCBSP_REG_RCCR 0xB0
-#define OMAP_MCBSP_REG_XBUFFSTAT 0xB4
-#define OMAP_MCBSP_REG_RBUFFSTAT 0xB8
-#define OMAP_MCBSP_REG_SSELCR 0xBC
-
+/* OMAP3 sidetone control registers */
#define OMAP_ST_REG_REV 0x00
#define OMAP_ST_REG_SYSCONFIG 0x10
#define OMAP_ST_REG_IRQSTATUS 0x18
@@ -146,8 +100,6 @@
#define OMAP_ST_REG_SFIRCR 0x28
#define OMAP_ST_REG_SSELCR 0x2C
-#endif
-
/************************** McBSP SPCR1 bit definitions ***********************/
#define RRST 0x0001
#define RRDY 0x0002
@@ -344,20 +296,20 @@
struct omap_mcbsp_ops {
void (*request)(unsigned int);
void (*free)(unsigned int);
- int (*set_clks_src)(u8, u8);
};
struct omap_mcbsp_platform_data {
- unsigned long phys_base;
- u8 dma_rx_sync, dma_tx_sync;
- u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP3
- /* Sidetone block for McBSP 2 and 3 */
- unsigned long phys_base_st;
-#endif
u16 buffer_size;
- unsigned int mcbsp_config_type;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
struct omap_mcbsp_st_data {
@@ -389,14 +341,12 @@
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP3
struct omap_mcbsp_st_data *st_data;
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
-#endif
void *reg_cache;
- unsigned int mcbsp_config_type;
+ int reg_cache_size;
};
/**
@@ -408,16 +358,10 @@
};
extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count, omap_mcbsp_cache_size;
-
-#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
+extern int omap_mcbsp_count;
int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
- struct omap_mcbsp_platform_data *config, int size);
void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP3
void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
@@ -426,18 +370,6 @@
u16 omap_mcbsp_get_tx_delay(unsigned int id);
u16 omap_mcbsp_get_rx_delay(unsigned int id);
int omap_mcbsp_get_dma_op_mode(unsigned int id);
-#else
-static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
-static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
-#endif
int omap_mcbsp_request(unsigned int id);
void omap_mcbsp_free(unsigned int id);
void omap_mcbsp_start(unsigned int id, int tx, int rx);
@@ -453,21 +385,11 @@
int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
-#ifdef CONFIG_ARCH_OMAP3
/* Sidetone specific API */
int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
int omap_st_enable(unsigned int id);
int omap_st_disable(unsigned int id);
int omap_st_is_enabled(unsigned int id);
-#else
-static inline int omap_st_set_chgain(unsigned int id, int channel,
- s16 chgain) { return 0; }
-static inline int omap_st_get_chgain(unsigned int id, int channel,
- s16 *chgain) { return 0; }
-static inline int omap_st_enable(unsigned int id) { return 0; }
-static inline int omap_st_disable(unsigned int id) { return 0; }
-static inline int omap_st_is_enabled(unsigned int id) { return 0; }
-#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index ee405b36..12c5b0c 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -68,7 +68,7 @@
*
*/
struct omap_device {
- struct platform_device pdev;
+ struct platform_device *pdev;
struct omap_hwmod **hwmods;
struct omap_device_pm_latency *pm_lats;
u32 dev_wakeup_lat;
@@ -88,25 +88,20 @@
/* Core code interface */
-int omap_device_count_resources(struct omap_device *od);
-int omap_device_fill_resources(struct omap_device *od, struct resource *res);
-
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **oh, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
-int omap_device_register(struct omap_device *od);
-int omap_early_device_register(struct omap_device *od);
-
void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
/* OMAP PM interface */
int omap_device_align_pm_lat(struct platform_device *pdev,
@@ -122,11 +117,6 @@
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
-static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
-{
- od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
-}
-
/*
* Entries should be kept in latency order ascending
*
@@ -157,6 +147,17 @@
#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
/* Get omap_device pointer from platform_device pointer */
-#define to_omap_device(x) container_of((x), struct omap_device, pdev)
+static inline struct omap_device *to_omap_device(struct platform_device *pdev)
+{
+ return pdev ? pdev->archdata.od : NULL;
+}
+
+static inline
+void omap_device_disable_idle_on_suspend(struct platform_device *pdev)
+{
+ struct omap_device *od = to_omap_device(pdev);
+
+ od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0e329ca..5419f1a 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -496,7 +496,6 @@
* @_state: internal-use hwmod state
* @_postsetup_state: internal-use state to leave the hwmod in after _setup()
* @flags: hwmod flags (documented below)
- * @omap_chip: OMAP chips this hwmod is present on
* @_lock: spinlock serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
*
@@ -526,7 +525,6 @@
char *clkdm_name;
struct clockdomain *clkdm;
char *vdd_name;
- struct voltagedomain *voltdm;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
@@ -545,7 +543,6 @@
u8 _int_flags;
u8 _state;
u8 _postsetup_state;
- const struct omap_chip_id omap_chip;
};
int omap_hwmod_register(struct omap_hwmod **ohs);
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
new file mode 100644
index 0000000..0a6a482
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -0,0 +1,20 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+
+#endif
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index e9b0e23..333871f 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -24,11 +24,16 @@
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
+static int initialized;
+
/*
* Intercept ioremap() requests for addresses in our fixed mapping regions.
*/
void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
{
+
+ WARN(!initialized, "Do not use ioremap before init_early\n");
+
#ifdef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap1()) {
if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
@@ -147,3 +152,8 @@
init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
#endif
}
+
+void __init omap_ioremap_init(void)
+{
+ initialized++;
+}
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 6c62af1..4b15cd7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,45 +24,40 @@
#include <linux/slab.h>
#include <plat/mcbsp.h>
-#include <plat/omap_device.h>
#include <linux/pm_runtime.h>
-/* XXX These "sideways" includes are a sign that something is wrong */
-#include "../mach-omap2/cm2xxx_3xxx.h"
-#include "../mach-omap2/cm-regbits-34xx.h"
-
struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count, omap_mcbsp_cache_size;
+int omap_mcbsp_count;
+
+#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
- if (cpu_class_is_omap1()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
- } else if (cpu_is_omap2420()) {
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
- __raw_writew((u16)val, mcbsp->io_base + reg);
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ ((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
+ __raw_writew((u16)val, addr);
} else {
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
- __raw_writel(val, mcbsp->io_base + reg);
+ ((u32 *)mcbsp->reg_cache)[reg] = val;
+ __raw_writel(val, addr);
}
}
static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
{
- if (cpu_class_is_omap1()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
- } else if (cpu_is_omap2420()) {
- return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
- ((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
+
+ if (mcbsp->pdata->reg_size == 2) {
+ return !from_cache ? __raw_readw(addr) :
+ ((u16 *)mcbsp->reg_cache)[reg];
} else {
- return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
- ((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+ return !from_cache ? __raw_readl(addr) :
+ ((u32 *)mcbsp->reg_cache)[reg];
}
}
-#ifdef CONFIG_ARCH_OMAP3
static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
{
__raw_writel(val, mcbsp->st_data->io_base_st + reg);
@@ -72,7 +67,6 @@
{
return __raw_readl(mcbsp->st_data->io_base_st + reg);
}
-#endif
#define MCBSP_READ(mcbsp, reg) \
omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
@@ -187,7 +181,7 @@
MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
MCBSP_WRITE(mcbsp, XCCR, config->xccr);
MCBSP_WRITE(mcbsp, RCCR, config->rccr);
}
@@ -239,46 +233,28 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- data_reg = mcbsp->phys_dma_base;
-
- if (mcbsp->mcbsp_config_type < MCBSP_CONFIG_TYPE2) {
+ if (mcbsp->pdata->reg_size == 2) {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR1;
+ data_reg = OMAP_MCBSP_REG_DRR1;
else
- data_reg += OMAP_MCBSP_REG_DXR1;
+ data_reg = OMAP_MCBSP_REG_DXR1;
} else {
if (stream)
- data_reg += OMAP_MCBSP_REG_DRR;
+ data_reg = OMAP_MCBSP_REG_DRR;
else
- data_reg += OMAP_MCBSP_REG_DXR;
+ data_reg = OMAP_MCBSP_REG_DXR;
}
- return data_reg;
+ return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
}
EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
-#ifdef CONFIG_ARCH_OMAP3
-static struct omap_device *find_omap_device_by_dev(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- return container_of(pdev, struct omap_device, pdev);
-}
-
static void omap_st_on(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Sidetone uses McBSP ICLK - which must not idle when sidetones
- * are enabled or sidetones start sounding ugly.
- */
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w &= ~(1 << (mcbsp->id - 2));
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
/* Enable McBSP Sidetone */
w = MCBSP_READ(mcbsp, SSELCR);
@@ -292,9 +268,6 @@
static void omap_st_off(struct omap_mcbsp *mcbsp)
{
unsigned int w;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
@@ -302,17 +275,13 @@
w = MCBSP_READ(mcbsp, SSELCR);
MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
- w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
- w |= 1 << (mcbsp->id - 2);
- omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+ if (mcbsp->pdata->enable_st_clock)
+ mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
}
static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
{
u16 val, i;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
val = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -340,9 +309,6 @@
{
u16 w;
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
w = MCBSP_ST_READ(mcbsp, SSELCR);
@@ -525,14 +491,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_tx_thres)
MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
@@ -548,14 +513,13 @@
{
struct omap_mcbsp *mcbsp;
- if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
- return;
-
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return;
if (threshold && threshold <= mcbsp->max_rx_thres)
MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
@@ -625,6 +589,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of free locations in the buffer */
buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
@@ -648,6 +614,8 @@
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (mcbsp->pdata->buffer_size == 0)
+ return 0;
/* Returns the number of used locations in the buffer */
buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
@@ -683,46 +651,6 @@
}
EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
- /*
- * Enable wakup behavior, smart idle and all wakeups
- * REVISIT: some wakeups may be unnecessary
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- }
-}
-
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
-{
- struct omap_device *od;
-
- od = find_omap_device_by_dev(mcbsp->dev);
-
- /*
- * Disable wakup behavior, smart idle and all wakeups
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /*
- * HW bug workaround - If no_idle mode is taken, we need to
- * go to smart_idle before going to always_idle, or the
- * device will not hit retention anymore.
- */
-
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
- }
-}
-#else
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
-static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
-#endif
-
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
@@ -735,7 +663,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+ reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
if (!reg_cache) {
return -ENOMEM;
}
@@ -757,8 +685,9 @@
pm_runtime_get_sync(mcbsp->dev);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_request(mcbsp);
+ /* Enable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/*
* Make sure that transmitter, receiver and sample-rate generator are
@@ -795,8 +724,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -825,8 +755,9 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -866,7 +797,7 @@
}
mcbsp = id_to_mcbsp_ptr(id);
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_start(mcbsp);
/* Only enable SRG, if McBSP is master */
@@ -904,7 +835,7 @@
MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
}
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
/* Release the transmitter and receiver */
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w &= ~(tx ? XDISABLE : 0);
@@ -934,7 +865,7 @@
/* Reset transmitter */
tx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, XCCR);
w |= (tx ? XDISABLE : 0);
MCBSP_WRITE(mcbsp, XCCR, w);
@@ -944,7 +875,7 @@
/* Reset receiver */
rx &= 1;
- if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (mcbsp->pdata->has_ccr) {
w = MCBSP_READ_CACHE(mcbsp, RCCR);
w |= (rx ? RDISABLE : 0);
MCBSP_WRITE(mcbsp, RCCR, w);
@@ -961,39 +892,72 @@
MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
}
- if (cpu_is_omap34xx())
+ if (mcbsp->st_data)
omap_st_stop(mcbsp);
}
EXPORT_SYMBOL(omap_mcbsp_stop);
-/*
- * The following functions are only required on an OMAP1-only build.
- * mach-omap2/mcbsp.c contains the real functions
- */
-#ifndef CONFIG_ARCH_OMAP2PLUS
int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return -EINVAL;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
+ return -EINVAL;
+ }
+ mcbsp = id_to_mcbsp_ptr(id);
+
+ if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+ src = "clks_ext";
+ else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+ src = "clks_fclk";
+ else
+ return -EINVAL;
+
+ if (mcbsp->pdata->set_clk_src)
+ return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
+ else
+ return -EINVAL;
}
+EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
void omap2_mcbsp1_mux_clkr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
+ struct omap_mcbsp *mcbsp;
+ const char *src;
+
+ if (mux == CLKR_SRC_CLKR)
+ src = "clkr";
+ else if (mux == CLKR_SRC_CLKX)
+ src = "clkx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
void omap2_mcbsp1_mux_fsr_src(u8 mux)
{
- WARN(1, "%s: should never be called on an OMAP1-only kernel\n",
- __func__);
- return;
-}
-#endif
+ struct omap_mcbsp *mcbsp;
+ const char *src;
-#ifdef CONFIG_ARCH_OMAP3
+ if (mux == FSR_SRC_FSR)
+ src = "fsr";
+ else if (mux == FSR_SRC_FSX)
+ src = "fsx";
+ else
+ return;
+
+ mcbsp = id_to_mcbsp_ptr(0);
+ if (mcbsp->pdata->mux_signal)
+ mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
+
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
#define THRESHOLD_PROP_BUILDER(prop) \
@@ -1084,6 +1048,17 @@
static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+static const struct attribute *additional_attrs[] = {
+ &dev_attr_max_tx_thres.attr,
+ &dev_attr_max_rx_thres.attr,
+ &dev_attr_dma_op_mode.attr,
+ NULL,
+};
+
+static const struct attribute_group additional_attr_group = {
+ .attrs = (struct attribute **)additional_attrs,
+};
+
static ssize_t st_taps_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1142,27 +1117,6 @@
static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
-static const struct attribute *additional_attrs[] = {
- &dev_attr_max_tx_thres.attr,
- &dev_attr_max_rx_thres.attr,
- &dev_attr_dma_op_mode.attr,
- NULL,
-};
-
-static const struct attribute_group additional_attr_group = {
- .attrs = (struct attribute **)additional_attrs,
-};
-
-static inline int __devinit omap_additional_add(struct device *dev)
-{
- return sysfs_create_group(&dev->kobj, &additional_attr_group);
-}
-
-static inline void __devexit omap_additional_remove(struct device *dev)
-{
- sysfs_remove_group(&dev->kobj, &additional_attr_group);
-}
-
static const struct attribute *sidetone_attrs[] = {
&dev_attr_st_taps.attr,
NULL,
@@ -1172,10 +1126,9 @@
.attrs = (struct attribute **)sidetone_attrs,
};
-static int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+static int __devinit omap_st_add(struct omap_mcbsp *mcbsp,
+ struct resource *res)
{
- struct platform_device *pdev;
- struct resource *res;
struct omap_mcbsp_st_data *st_data;
int err;
@@ -1185,9 +1138,6 @@
goto err1;
}
- pdev = container_of(mcbsp->dev, struct platform_device, dev);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
st_data->io_base_st = ioremap(res->start, resource_size(res));
if (!st_data->io_base_st) {
err = -ENOMEM;
@@ -1214,60 +1164,11 @@
{
struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- if (st_data) {
- sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
- iounmap(st_data->io_base_st);
- kfree(st_data);
- }
+ sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ iounmap(st_data->io_base_st);
+ kfree(st_data);
}
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
-{
- mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
- if (cpu_is_omap34xx()) {
- /*
- * Initially configure the maximum thresholds to a safe value.
- * The McBSP FIFO usage with these values should not go under
- * 16 locations.
- * If the whole FIFO without safety buffer is used, than there
- * is a possibility that the DMA will be not able to push the
- * new data on time, causing channel shifts in runtime.
- */
- mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
- mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
- /*
- * REVISIT: Set dmap_op_mode to THRESHOLD as default
- * for mcbsp2 instances.
- */
- if (omap_additional_add(mcbsp->dev))
- dev_warn(mcbsp->dev,
- "Unable to create additional controls\n");
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- if (omap_st_add(mcbsp))
- dev_warn(mcbsp->dev,
- "Unable to create sidetone controls\n");
-
- } else {
- mcbsp->max_tx_thres = -EINVAL;
- mcbsp->max_rx_thres = -EINVAL;
- }
-}
-
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
-{
- if (cpu_is_omap34xx()) {
- omap_additional_remove(mcbsp->dev);
-
- if (mcbsp->id == 2 || mcbsp->id == 3)
- omap_st_remove(mcbsp);
- }
-}
-#else
-static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
-static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
-#endif /* CONFIG_ARCH_OMAP3 */
-
/*
* McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
* 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -1316,7 +1217,7 @@
}
}
mcbsp->phys_base = res->start;
- omap_mcbsp_cache_size = resource_size(res);
+ mcbsp->reg_cache_size = resource_size(res);
mcbsp->io_base = ioremap(res->start, resource_size(res));
if (!mcbsp->io_base) {
ret = -ENOMEM;
@@ -1364,15 +1265,52 @@
mcbsp->pdata = pdata;
mcbsp->dev = &pdev->dev;
mcbsp_ptr[id] = mcbsp;
- mcbsp->mcbsp_config_type = pdata->mcbsp_config_type;
platform_set_drvdata(pdev, mcbsp);
pm_runtime_enable(mcbsp->dev);
- /* Initialize mcbsp properties for OMAP34XX if needed / applicable */
- omap34xx_device_init(mcbsp);
+ mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
+ if (mcbsp->pdata->buffer_size) {
+ /*
+ * Initially configure the maximum thresholds to a safe value.
+ * The McBSP FIFO usage with these values should not go under
+ * 16 locations.
+ * If the whole FIFO without safety buffer is used, than there
+ * is a possibility that the DMA will be not able to push the
+ * new data on time, causing channel shifts in runtime.
+ */
+ mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
+ mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
+
+ ret = sysfs_create_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create additional controls\n");
+ goto err_thres;
+ }
+ } else {
+ mcbsp->max_tx_thres = -EINVAL;
+ mcbsp->max_rx_thres = -EINVAL;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
+ if (res) {
+ ret = omap_st_add(mcbsp, res);
+ if (ret) {
+ dev_err(mcbsp->dev,
+ "Unable to create sidetone controls\n");
+ goto err_st;
+ }
+ }
return 0;
+err_st:
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+err_thres:
+ clk_put(mcbsp->fclk);
err_res:
iounmap(mcbsp->io_base);
err_ioremap:
@@ -1392,7 +1330,12 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- omap34xx_device_exit(mcbsp);
+ if (mcbsp->pdata->buffer_size)
+ sysfs_remove_group(&mcbsp->dev->kobj,
+ &additional_attr_group);
+
+ if (mcbsp->st_data)
+ omap_st_remove(mcbsp);
clk_put(mcbsp->fclk);
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 02609ee..cd90bed 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -85,6 +85,8 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/notifier.h>
#include <plat/omap_device.h>
#include <plat/omap_hwmod.h>
@@ -94,6 +96,23 @@
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
+static int omap_device_register(struct platform_device *pdev);
+static int omap_early_device_register(struct platform_device *pdev);
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+static void omap_device_delete(struct omap_device *od);
+
+
+static struct omap_device_pm_latency omap_default_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ }
+};
+
/* Private functions */
/**
@@ -114,7 +133,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +157,24 @@
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev->dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +201,7 @@
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev->dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +224,26 @@
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_dbg(&od->pdev->dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev->dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -245,28 +261,27 @@
if (!clk_alias || !clk_name)
return;
- pr_debug("omap_device: %s: Creating %s -> %s\n",
- dev_name(&od->pdev.dev), clk_alias, clk_name);
+ dev_dbg(&od->pdev->dev, "Creating %s -> %s\n", clk_alias, clk_name);
- r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias);
+ r = clk_get_sys(dev_name(&od->pdev->dev), clk_alias);
if (!IS_ERR(r)) {
- pr_warning("omap_device: %s: alias %s already exists\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_warn(&od->pdev->dev,
+ "alias %s already exists\n", clk_alias);
clk_put(r);
return;
}
r = omap_clk_get_by_name(clk_name);
if (IS_ERR(r)) {
- pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n",
- dev_name(&od->pdev.dev), clk_name);
+ dev_err(&od->pdev->dev,
+ "omap_clk_get_by_name for %s failed\n", clk_name);
return;
}
- l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev));
+ l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev));
if (!l) {
- pr_err("omap_device: %s: clkdev_alloc for %s failed\n",
- dev_name(&od->pdev.dev), clk_alias);
+ dev_err(&od->pdev->dev,
+ "clkdev_alloc for %s failed\n", clk_alias);
return;
}
@@ -304,6 +319,96 @@
}
+static struct dev_pm_domain omap_device_pm_domain;
+
+/**
+ * omap_device_build_from_dt - build an omap_device with multiple hwmods
+ * @pdev_name: name of the platform_device driver to use
+ * @pdev_id: this platform_device's connection ID
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ * @is_early_device: should the device be registered as an early device or not
+ *
+ * Function for building an omap_device already registered from device-tree
+ *
+ * Returns 0 or PTR_ERR() on error.
+ */
+static int omap_device_build_from_dt(struct platform_device *pdev)
+{
+ struct omap_hwmod **hwmods;
+ struct omap_device *od;
+ struct omap_hwmod *oh;
+ struct device_node *node = pdev->dev.of_node;
+ const char *oh_name;
+ int oh_cnt, i, ret = 0;
+
+ oh_cnt = of_property_count_strings(node, "ti,hwmods");
+ if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
+ dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ return -ENODEV;
+ }
+
+ hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods) {
+ ret = -ENOMEM;
+ goto odbfd_exit;
+ }
+
+ for (i = 0; i < oh_cnt; i++) {
+ of_property_read_string_index(node, "ti,hwmods", i, &oh_name);
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ dev_err(&pdev->dev, "Cannot lookup hwmod '%s'\n",
+ oh_name);
+ ret = -EINVAL;
+ goto odbfd_exit1;
+ }
+ hwmods[i] = oh;
+ }
+
+ od = omap_device_alloc(pdev, hwmods, oh_cnt, NULL, 0);
+ if (!od) {
+ dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
+ oh_name);
+ ret = PTR_ERR(od);
+ goto odbfd_exit1;
+ }
+
+ if (of_get_property(node, "ti,no_idle_on_suspend", NULL))
+ omap_device_disable_idle_on_suspend(pdev);
+
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+
+odbfd_exit1:
+ kfree(hwmods);
+odbfd_exit:
+ return ret;
+}
+
+static int _omap_device_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ switch (event) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (pdev->dev.of_node)
+ omap_device_build_from_dt(pdev);
+ break;
+
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (pdev->archdata.od)
+ omap_device_delete(pdev->archdata.od);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+
/* Public functions for use by core code */
/**
@@ -343,7 +448,7 @@
* much memory to allocate before calling
* omap_device_fill_resources(). Returns the count.
*/
-int omap_device_count_resources(struct omap_device *od)
+static int omap_device_count_resources(struct omap_device *od)
{
int c = 0;
int i;
@@ -352,7 +457,7 @@
c += omap_hwmod_count_resources(od->hwmods[i]);
pr_debug("omap_device: %s: counted %d total resources across %d "
- "hwmods\n", od->pdev.name, c, od->hwmods_cnt);
+ "hwmods\n", od->pdev->name, c, od->hwmods_cnt);
return c;
}
@@ -374,7 +479,8 @@
* functions to get device resources. Hacking around the existing
* platform_device code wastes memory. Returns 0.
*/
-int omap_device_fill_resources(struct omap_device *od, struct resource *res)
+static int omap_device_fill_resources(struct omap_device *od,
+ struct resource *res)
{
int c = 0;
int i, r;
@@ -389,6 +495,113 @@
}
/**
+ * omap_device_alloc - allocate an omap_device
+ * @pdev: platform_device that will be included in this omap_device
+ * @oh: ptr to the single omap_hwmod that backs this omap_device
+ * @pdata: platform_data ptr to associate with the platform_device
+ * @pdata_len: amount of memory pointed to by @pdata
+ * @pm_lats: pointer to a omap_device_pm_latency array for this device
+ * @pm_lats_cnt: ARRAY_SIZE() of @pm_lats
+ *
+ * Convenience function for allocating an omap_device structure and filling
+ * hwmods, resources and pm_latency attributes.
+ *
+ * Returns an struct omap_device pointer or ERR_PTR() on error;
+ */
+static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt)
+{
+ int ret = -ENOMEM;
+ struct omap_device *od;
+ struct resource *res = NULL;
+ int i, res_count;
+ struct omap_hwmod **hwmods;
+
+ od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ if (!od) {
+ ret = -ENOMEM;
+ goto oda_exit1;
+ }
+ od->hwmods_cnt = oh_cnt;
+
+ hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+ if (!hwmods)
+ goto oda_exit2;
+
+ od->hwmods = hwmods;
+ od->pdev = pdev;
+
+ /*
+ * HACK: Ideally the resources from DT should match, and hwmod
+ * should just add the missing ones. Since the name is not
+ * properly populated by DT, stick to hwmod resources only.
+ */
+ if (pdev->num_resources && pdev->resource)
+ dev_warn(&pdev->dev, "%s(): resources already allocated %d\n",
+ __func__, pdev->num_resources);
+
+ res_count = omap_device_count_resources(od);
+ if (res_count > 0) {
+ dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n",
+ __func__, res_count);
+ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
+ if (!res)
+ goto oda_exit3;
+
+ omap_device_fill_resources(od, res);
+
+ ret = platform_device_add_resources(pdev, res, res_count);
+ kfree(res);
+
+ if (ret)
+ goto oda_exit3;
+ }
+
+ if (!pm_lats) {
+ pm_lats = omap_default_latency;
+ pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+ }
+
+ od->pm_lats_cnt = pm_lats_cnt;
+ od->pm_lats = kmemdup(pm_lats,
+ sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+ GFP_KERNEL);
+ if (!od->pm_lats)
+ goto oda_exit3;
+
+ pdev->archdata.od = od;
+
+ for (i = 0; i < oh_cnt; i++) {
+ hwmods[i]->od = od;
+ _add_hwmod_clocks_clkdev(od, hwmods[i]);
+ }
+
+ return od;
+
+oda_exit3:
+ kfree(hwmods);
+oda_exit2:
+ kfree(od);
+oda_exit1:
+ dev_err(&pdev->dev, "omap_device: build failed (%d)\n", ret);
+
+ return ERR_PTR(ret);
+}
+
+static void omap_device_delete(struct omap_device *od)
+{
+ if (!od)
+ return;
+
+ od->pdev->archdata.od = NULL;
+ kfree(od->pm_lats);
+ kfree(od->hwmods);
+ kfree(od);
+}
+
+/**
* omap_device_build - build and register an omap_device with one omap_hwmod
* @pdev_name: name of the platform_device driver to use
* @pdev_id: this platform_device's connection ID
@@ -405,7 +618,7 @@
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
@@ -438,18 +651,15 @@
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device)
{
int ret = -ENOMEM;
+ struct platform_device *pdev;
struct omap_device *od;
- char *pdev_name2;
- struct resource *res = NULL;
- int i, res_count;
- struct omap_hwmod **hwmods;
if (!ohs || oh_cnt == 0 || !pdev_name)
return ERR_PTR(-EINVAL);
@@ -457,72 +667,40 @@
if (!pdata && pdata_len > 0)
return ERR_PTR(-EINVAL);
- pr_debug("omap_device: %s: building with %d hwmods\n", pdev_name,
- oh_cnt);
+ pdev = platform_device_alloc(pdev_name, pdev_id);
+ if (!pdev) {
+ ret = -ENOMEM;
+ goto odbs_exit;
+ }
- od = kzalloc(sizeof(struct omap_device), GFP_KERNEL);
+ /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
+ if (pdev->id != -1)
+ dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+ else
+ dev_set_name(&pdev->dev, "%s", pdev->name);
+
+ od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt);
if (!od)
- return ERR_PTR(-ENOMEM);
-
- od->hwmods_cnt = oh_cnt;
-
- hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt,
- GFP_KERNEL);
- if (!hwmods)
goto odbs_exit1;
- memcpy(hwmods, ohs, sizeof(struct omap_hwmod *) * oh_cnt);
- od->hwmods = hwmods;
-
- pdev_name2 = kzalloc(strlen(pdev_name) + 1, GFP_KERNEL);
- if (!pdev_name2)
- goto odbs_exit2;
- strcpy(pdev_name2, pdev_name);
-
- od->pdev.name = pdev_name2;
- od->pdev.id = pdev_id;
-
- res_count = omap_device_count_resources(od);
- if (res_count > 0) {
- res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL);
- if (!res)
- goto odbs_exit3;
- }
- omap_device_fill_resources(od, res);
-
- od->pdev.num_resources = res_count;
- od->pdev.resource = res;
-
- ret = platform_device_add_data(&od->pdev, pdata, pdata_len);
+ ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)
- goto odbs_exit4;
-
- od->pm_lats = pm_lats;
- od->pm_lats_cnt = pm_lats_cnt;
+ goto odbs_exit2;
if (is_early_device)
- ret = omap_early_device_register(od);
+ ret = omap_early_device_register(pdev);
else
- ret = omap_device_register(od);
-
- for (i = 0; i < oh_cnt; i++) {
- hwmods[i]->od = od;
- _add_hwmod_clocks_clkdev(od, hwmods[i]);
- }
-
+ ret = omap_device_register(pdev);
if (ret)
- goto odbs_exit4;
+ goto odbs_exit2;
- return od;
+ return pdev;
-odbs_exit4:
- kfree(res);
-odbs_exit3:
- kfree(pdev_name2);
odbs_exit2:
- kfree(hwmods);
+ omap_device_delete(od);
odbs_exit1:
- kfree(od);
+ platform_device_put(pdev);
+odbs_exit:
pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
@@ -538,11 +716,11 @@
* platform_early_add_device() on the underlying platform_device.
* Returns 0 by default.
*/
-int omap_early_device_register(struct omap_device *od)
+static int omap_early_device_register(struct platform_device *pdev)
{
struct platform_device *devices[1];
- devices[0] = &(od->pdev);
+ devices[0] = pdev;
early_platform_add_devices(devices, 1);
return 0;
}
@@ -638,13 +816,13 @@
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
-int omap_device_register(struct omap_device *od)
+static int omap_device_register(struct platform_device *pdev)
{
- pr_debug("omap_device: %s: registering\n", od->pdev.name);
+ pr_debug("omap_device: %s: registering\n", pdev->name);
- od->pdev.dev.parent = &omap_device_parent;
- od->pdev.dev.pm_domain = &omap_device_pm_domain;
- return platform_device_register(&od->pdev);
+ pdev->dev.parent = &omap_device_parent;
+ pdev->dev.pm_domain = &omap_device_pm_domain;
+ return platform_device_add(pdev);
}
@@ -671,8 +849,9 @@
od = to_omap_device(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -710,8 +889,9 @@
od = to_omap_device(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -742,8 +922,9 @@
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -837,6 +1018,42 @@
return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
}
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+ struct omap_hwmod *oh;
+
+ if (!oh_name) {
+ WARN(1, "%s: no hwmod name!\n", __func__);
+ return ERR_PTR(-EINVAL);
+ }
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (IS_ERR_OR_NULL(oh)) {
+ WARN(1, "%s: no hwmod for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+ }
+ if (IS_ERR_OR_NULL(oh->od)) {
+ WARN(1, "%s: no omap_device for %s\n", __func__,
+ oh_name);
+ return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+ }
+
+ if (IS_ERR_OR_NULL(oh->od->pdev))
+ return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+ return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
/*
* Public functions intended for use in omap_device_pm_latency
* .activate_func and .deactivate_func function pointers
@@ -917,8 +1134,13 @@
.parent = &platform_bus,
};
+static struct notifier_block platform_nb = {
+ .notifier_call = _omap_device_notifier_call,
+};
+
static int __init omap_device_init(void)
{
+ bus_register_notifier(&platform_bus_type, &platform_nb);
return device_register(&omap_device_parent);
}
core_initcall(omap_device_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 363c91e..8b28664 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -19,7 +19,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
-#include <linux/omapfb.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
@@ -29,10 +28,8 @@
#include <plat/sram.h>
#include <plat/board.h>
#include <plat/cpu.h>
-#include <plat/vram.h>
#include "sram.h"
-#include "fb.h"
/* XXX These "sideways" includes are a sign that something is wrong */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
@@ -41,16 +38,9 @@
#endif
#define OMAP1_SRAM_PA 0x20000000
-#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
-#define OMAP2_SRAM_VA 0xfe400000
-#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_VA 0xfe400000
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_VA 0xfe400000
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -73,9 +63,9 @@
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_start;
-static unsigned long omap_sram_base;
+static void __iomem *omap_sram_base;
static unsigned long omap_sram_size;
-static unsigned long omap_sram_ceil;
+static void __iomem *omap_sram_ceil;
/*
* Depending on the target RAMFS firewall setup, the public usable amount of
@@ -112,12 +102,9 @@
*/
static void __init omap_detect_sram(void)
{
- unsigned long reserved;
-
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
@@ -126,25 +113,20 @@
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_PUB_VA;
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
} else {
- omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_VA;
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
} else {
- omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
@@ -153,7 +135,6 @@
}
}
} else {
- omap_sram_base = OMAP1_SRAM_VA;
omap_sram_start = OMAP1_SRAM_PA;
if (cpu_is_omap7xx())
@@ -170,35 +151,14 @@
omap_sram_size = 0x4000;
}
}
- reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
- omap_sram_size,
- omap_sram_start + SRAM_BOOTLOADER_SZ,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
- omap_sram_size -= reserved;
-
- reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
- omap_sram_size,
- omap_sram_start + SRAM_BOOTLOADER_SZ,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
- omap_sram_size -= reserved;
-
- omap_sram_ceil = omap_sram_base + omap_sram_size;
}
-static struct map_desc omap_sram_io_desc[] __initdata = {
- { /* .length gets filled in at runtime */
- .virtual = OMAP1_SRAM_VA,
- .pfn = __phys_to_pfn(OMAP1_SRAM_PA),
- .type = MT_MEMORY
- }
-};
-
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
static void __init omap_map_sram(void)
{
- unsigned long base;
+ int cached = 1;
if (omap_sram_size == 0)
return;
@@ -211,28 +171,18 @@
* the ARM may attempt to write cache lines back to SDRAM
* which will cause the system to hang.
*/
- omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
+ cached = 0;
}
- omap_sram_io_desc[0].virtual = omap_sram_base;
- base = omap_sram_start;
- base = ROUND_DOWN(base, PAGE_SIZE);
- omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
- omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
- iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
+ omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+ omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
+ cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
- pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
- (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
- omap_sram_io_desc[0].virtual,
- omap_sram_io_desc[0].length);
-
- /*
- * Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but since we're called from map_io(), we
- * must do it here.
- */
- local_flush_tlb_all();
- flush_cache_all();
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
/*
* Looks like we need to preserve some bootloader code at the
@@ -251,13 +201,18 @@
*/
void *omap_sram_push_address(unsigned long size)
{
- if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
+ unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+ available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+
+ if (size > available) {
pr_err("Not enough space in SRAM\n");
return NULL;
}
- omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
+ new_ceil -= size;
+ new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+ omap_sram_ceil = IOMEM(new_ceil);
return (void *)omap_sram_ceil;
}
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 89e68e0..5c79c29 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -456,7 +456,7 @@
#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
-void __init mfp_init_base(unsigned long mfpr_base);
+void __init mfp_init_base(void __iomem *mfpr_base);
void __init mfp_init_addr(struct mfp_addr_map *map);
/*
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index be12ead..2c4dbb1 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -229,7 +229,7 @@
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
-void __init mfp_init_base(unsigned long mfpr_base)
+void __init mfp_init_base(void __iomem *mfpr_base)
{
int i;
@@ -237,7 +237,7 @@
for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
mfp_table[i].config = -1;
- mfpr_mmio_base = (void __iomem *)mfpr_base;
+ mfpr_mmio_base = mfpr_base;
}
void __init mfp_init_addr(struct mfp_addr_map *map)
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index c1fc6c6..3c63353 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -215,19 +215,18 @@
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
- unsigned long idcode = 0x0;
-
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
- idcode = s3c24xx_read_idcode_v5();
+ samsung_cpu_id = s3c24xx_read_idcode_v5();
} else {
- idcode = s3c24xx_read_idcode_v4();
+ samsung_cpu_id = s3c24xx_read_idcode_v4();
}
+ s3c24xx_init_cpu();
arm_pm_restart = s3c24xx_pm_restart;
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
deleted file mode 100644
index bd534d3..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/map.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S3C24XX_MAP_H
-#define __ASM_PLAT_S3C24XX_MAP_H
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART S3C_VA_UART
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_SZ_UART SZ_1M
-#define S3C_UART_OFFSET (0x4000)
-
-#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C24XX_SZ_CLKPWR SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_IIS SZ_1M
-#define S3C24XX_SZ_ADC SZ_1M
-#define S3C24XX_SZ_SPI SZ_1M
-#define S3C24XX_SZ_SDI SZ_1M
-#define S3C24XX_SZ_NAND SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO SZ_1M
-
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_PLAT_S3C24XX_MAP_H */
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index bbc2aa7..7b0a28f 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -33,48 +33,66 @@
static const char name_s5pc100[] = "S5PC100";
static const char name_s5pv210[] = "S5PV210/S5PC110";
static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
static struct cpu_table cpu_ids[] __initdata = {
{
- .idcode = 0x56440100,
- .idmask = 0xfffff000,
+ .idcode = S5P6440_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6440_map_io,
.init_clocks = s5p6440_init_clocks,
.init_uarts = s5p6440_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6440,
}, {
- .idcode = 0x36450000,
- .idmask = 0xfffff000,
+ .idcode = S5P6450_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
.map_io = s5p6450_map_io,
.init_clocks = s5p6450_init_clocks,
.init_uarts = s5p6450_init_uarts,
.init = s5p64x0_init,
.name = name_s5p6450,
}, {
- .idcode = 0x43100000,
- .idmask = 0xfffff000,
+ .idcode = S5PC100_CPU_ID,
+ .idmask = S5PC100_CPU_MASK,
.map_io = s5pc100_map_io,
.init_clocks = s5pc100_init_clocks,
.init_uarts = s5pc100_init_uarts,
.init = s5pc100_init,
.name = name_s5pc100,
}, {
- .idcode = 0x43110000,
- .idmask = 0xfffff000,
+ .idcode = S5PV210_CPU_ID,
+ .idmask = S5PV210_CPU_MASK,
.map_io = s5pv210_map_io,
.init_clocks = s5pv210_init_clocks,
.init_uarts = s5pv210_init_uarts,
.init = s5pv210_init,
.name = name_s5pv210,
}, {
- .idcode = 0x43210000,
- .idmask = 0xfffe0000,
+ .idcode = EXYNOS4210_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos4_init,
.name = name_exynos4210,
+ }, {
+ .idcode = EXYNOS4212_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4212,
+ }, {
+ .idcode = EXYNOS4412_CPU_ID,
+ .idmask = EXYNOS4_CPU_MASK,
+ .map_io = exynos4_map_io,
+ .init_clocks = exynos4_init_clocks,
+ .init_uarts = exynos4_init_uarts,
+ .init = exynos4_init,
+ .name = name_exynos4412,
},
};
@@ -114,13 +132,13 @@
void __init s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr)
{
- unsigned long idcode;
-
/* initialize the io descriptors we need for initialization */
iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
if (mach_desc)
iotable_init(mach_desc, size);
- idcode = __raw_readl(cpuid_addr);
- s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+ /* detect cpu id and rev. */
+ s5p_init_cpu(cpuid_addr);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 907caab..f680a14 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -14,10 +14,11 @@
extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
extern void exynos4_setup_clocks(void);
-#ifdef CONFIG_CPU_EXYNOS4210
-
+#ifdef CONFIG_ARCH_EXYNOS4
extern int exynos4_init(void);
extern void exynos4_init_irq(void);
extern void exynos4_map_io(void);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fad..3e21b94 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -12,6 +12,59 @@
* published by the Free Software Foundation.
*/
+#include <asm/div64.h>
+
+#define PLL35XX_MDIV_MASK (0x3FF)
+#define PLL35XX_PDIV_MASK (0x3F)
+#define PLL35XX_SDIV_MASK (0x7)
+#define PLL35XX_MDIV_SHIFT (16)
+#define PLL35XX_PDIV_SHIFT (8)
+#define PLL35XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK (0xFFFF)
+#define PLL36XX_MDIV_MASK (0x1FF)
+#define PLL36XX_PDIV_MASK (0x3F)
+#define PLL36XX_SDIV_MASK (0x7)
+#define PLL36XX_MDIV_SHIFT (16)
+#define PLL36XX_PDIV_SHIFT (8)
+#define PLL36XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+ u32 pll_con0, u32 pll_con1)
+{
+ unsigned long result;
+ u32 mdiv, pdiv, sdiv, kdiv;
+ u64 tmp;
+
+ mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+ pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+ sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+ kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+ tmp = baseclk;
+
+ tmp *= (mdiv << 16) + kdiv;
+ do_div(tmp, (pdiv << sdiv));
+ result = tmp >> 16;
+
+ return result;
+}
+
#define PLL45XX_MDIV_MASK (0x3FF)
#define PLL45XX_PDIV_MASK (0x3F)
#define PLL45XX_SDIV_MASK (0x7)
@@ -19,8 +72,6 @@
#define PLL45XX_PDIV_SHIFT (8)
#define PLL45XX_SDIV_SHIFT (0)
-#include <asm/div64.h>
-
enum pll45xx_type_t {
pll_4500,
pll_4502,
@@ -72,7 +123,6 @@
mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
- kdiv = pll_con1 & PLL46XX_KDIV_MASK;
if (pll_type == pll_4650c)
kdiv = pll_con1 & PLL4650C_KDIV_MASK;
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index dffa37b..3895f9a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -362,4 +362,11 @@
help
Say Y here if you want to control Power Domain by Runtime PM.
+config DEBUG_S3C_UART
+ depends on PLAT_SAMSUNG
+ int
+ default "0" if DEBUG_S3C_UART0
+ default "1" if DEBUG_S3C_UART1
+ default "2" if DEBUG_S3C_UART2
+
endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 11059223..09adb84 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,7 +11,7 @@
# Objects we always build independent of SoC choice
-obj-y += init.o
+obj-y += init.o cpu.o
obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
obj-y += clock.o
obj-y += pwm-clock.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
new file mode 100644
index 0000000..81c06d4
--- /dev/null
+++ b/arch/arm/plat-samsung/cpu.c
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+ return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+ /* nothing here yet */
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+ if (!samsung_cpu_id) {
+ /*
+ * S3C6400 has the ID register in a different place,
+ * and needs a write before it can be read.
+ */
+ __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+ samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+ }
+
+ samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+ samsung_cpu_id = __raw_readl(cpuid_addr);
+ samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index db7a65c..06825c4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -58,22 +58,5 @@
void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index 2497321..4524ef4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -58,22 +58,5 @@
void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index f60aedb..9cede96 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -59,22 +59,5 @@
void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
index ede776f..0358ef4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -62,22 +62,5 @@
void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
{
- struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata;
-
- set->cd_type = pd->cd_type;
- set->ext_cd_init = pd->ext_cd_init;
- set->ext_cd_cleanup = pd->ext_cd_cleanup;
- set->ext_cd_gpio = pd->ext_cd_gpio;
- set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
-
- if (pd->max_width)
- set->max_width = pd->max_width;
- if (pd->cfg_gpio)
- set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
- if (pd->host_caps)
- set->host_caps |= pd->host_caps;
- if (pd->clk_type)
- set->clk_type = pd->clk_type;
+ s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata);
}
diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c
index 82543f0..5f3d46a 100644
--- a/arch/arm/plat-samsung/dev-ts.c
+++ b/arch/arm/plat-samsung/dev-ts.c
@@ -43,8 +43,17 @@
.resource = s3c_ts_resource,
};
+static struct s3c2410_ts_mach_info default_ts_data __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 2,
+};
+
void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
{
+ if (!pd)
+ pd = &default_ts_data;
+
s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
&s3c_device_ts);
}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c0a5741..54f370f 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,9 +1,12 @@
/* linux/arch/arm/plat-samsung/include/plat/cpu.h
*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Header file for S3C24XX CPU support
+ * Header file for Samsung CPU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -15,6 +18,108 @@
#ifndef __SAMSUNG_PLAT_CPU_H
#define __SAMSUNG_PLAT_CPU_H
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID 0x32400000
+#define S3C24XX_CPU_MASK 0xFFF00000
+
+#define S3C6400_CPU_ID 0x36400000
+#define S3C6410_CPU_ID 0x36410000
+#define S3C64XX_CPU_ID (S3C6400_CPU_ID & S3C6410_CPU_ID)
+#define S3C64XX_CPU_MASK 0xFFFFF000
+
+#define S5P6440_CPU_ID 0x56440000
+#define S5P6450_CPU_ID 0x36450000
+#define S5P64XX_CPU_MASK 0xFFFFF000
+
+#define S5PC100_CPU_ID 0x43100000
+#define S5PC100_CPU_MASK 0xFFFFF000
+
+#define S5PV210_CPU_ID 0x43110000
+#define S5PV210_CPU_MASK 0xFFFFF000
+
+#define EXYNOS4210_CPU_ID 0x43210000
+#define EXYNOS4212_CPU_ID 0x43220000
+#define EXYNOS4412_CPU_ID 0xE4412200
+#define EXYNOS4_CPU_MASK 0xFFFE0000
+
+#define IS_SAMSUNG_CPU(name, id, mask) \
+static inline int is_samsung_##name(void) \
+{ \
+ return ((samsung_cpu_id & mask) == (id & mask)); \
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+ defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+ defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx() is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx() is_samsung_s3c64xx()
+#else
+# define soc_is_s3c64xx() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440() is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440() 0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450() is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100() is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100() 0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210() is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210() 0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210() is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212() is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212() 0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412() is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412() 0
+#endif
+
+#define EXYNOS4210_REV_0 (0x0)
+#define EXYNOS4210_REV_1_0 (0x10)
+#define EXYNOS4210_REV_1_1 (0x11)
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
@@ -55,6 +160,12 @@
extern void s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr);
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
+extern unsigned int samsung_rev(void);
+
extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c24xx_init_clocks(int xtal);
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 336d5ac..ab9bce6 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -18,11 +18,6 @@
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
-struct s3c24xx_dma_addr {
- unsigned long from;
- unsigned long to;
-};
-
/* struct s3c24xx_dma_map
*
* this holds the mapping information for the channel selected
@@ -31,7 +26,6 @@
struct s3c24xx_dma_map {
const char *name;
- struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C_DMA_CHANNELS];
unsigned long channels_rx[S3C_DMA_CHANNELS];
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
new file mode 100644
index 0000000..7d04875
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C24XX_VA_UART S3C_VA_UART
+
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_PA_UART S3C2410_PA_UART
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET (0x400)
+#endif
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/map-s5p.h
rename to arch/arm/plat-samsung/include/plat/map-s5p.h
index 36d3551..c2d7bda 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
@@ -40,8 +40,6 @@
#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
-#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
@@ -58,4 +56,6 @@
#define S3C_UART_OFFSET (0x400)
#endif
+#include <plat/map-s3c.h>
+
#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 058e096..4a65520 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -86,6 +86,13 @@
struct mmc_card *card);
};
+/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data
+ * @pd: The default platform data for this device.
+ * @set: Pointer to the platform data to fill in.
+ */
+extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set);
+
/**
* s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
* @pd: Platform data to register to device.
diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c
index 7cf2e1e..6de1a38 100644
--- a/arch/arm/plat-samsung/platformdata.c
+++ b/arch/arm/plat-samsung/platformdata.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <plat/devs.h>
+#include <plat/sdhci.h>
void __init *s3c_set_platdata(void *pd, size_t pdsize,
struct platform_device *pdev)
@@ -35,3 +36,24 @@
pdev->dev.platform_data = npd;
return npd;
}
+
+void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
+ struct s3c_sdhci_platdata *set)
+{
+ set->cd_type = pd->cd_type;
+ set->ext_cd_init = pd->ext_cd_init;
+ set->ext_cd_cleanup = pd->ext_cd_cleanup;
+ set->ext_cd_gpio = pd->ext_cd_gpio;
+ set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert;
+
+ if (pd->max_width)
+ set->max_width = pd->max_width;
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+ if (pd->host_caps)
+ set->host_caps |= pd->host_caps;
+ if (pd->clk_type)
+ set->clk_type = pd->clk_type;
+}
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index 51ecfea..92f18d3 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -77,7 +77,7 @@
* since we haven't sent them a soft interrupt, they shouldn't
* be there.
*/
- write_pen_release(cpu);
+ write_pen_release(cpu_logical_map(cpu));
/*
* Send the secondary CPU a soft interrupt, thereby causing
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3ff7785..27489b6 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -92,7 +92,7 @@
def_bool y
config GENERIC_GPIO
- def_bool y
+ bool
config DMI
bool
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 43ab1cd..954d81e 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -87,6 +87,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_IGB=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index b11fa88..91c41ec 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -75,6 +75,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 137a453..a5a9e02 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -77,6 +77,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
index 2bf76e4..37b9b42 100644
--- a/arch/ia64/configs/xen_domu_defconfig
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -80,6 +80,7 @@
CONFIG_NET_TULIP=y
CONFIG_TULIP=m
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 1d42827..fc7aba0 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -57,6 +57,7 @@
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_NET_PCI=y
+CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_TIGON3=y
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 7c928da..7617248 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -321,11 +321,13 @@
#define __NR_syncfs 1329
#define __NR_setns 1330
#define __NR_sendmmsg 1331
+#define __NR_process_vm_readv 1332
+#define __NR_process_vm_writev 1333
#ifdef __KERNEL__
-#define NR_syscalls 308 /* length of syscall table */
+#define NR_syscalls 310 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 198c753..5b31d46 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1777,6 +1777,8 @@
data8 sys_syncfs
data8 sys_setns // 1330
data8 sys_sendmmsg
+ data8 sys_process_vm_readv
+ data8 sys_process_vm_writev
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 30862c0..2de41d4 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -615,11 +615,15 @@
}
}
- if (cpu == SN_HWPERF_ARG_ANY_CPU || cpu == get_cpu()) {
- /* don't care, or already on correct cpu */
+ if (cpu == SN_HWPERF_ARG_ANY_CPU) {
+ /* don't care which cpu */
sn_hwperf_call_sal(op_info);
- }
- else {
+ } else if (cpu == get_cpu()) {
+ /* already on correct cpu */
+ sn_hwperf_call_sal(op_info);
+ put_cpu();
+ } else {
+ put_cpu();
if (use_ipi) {
/* use an interprocessor interrupt to call SAL */
smp_call_function_single(cpu, sn_hwperf_call_sal,
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4cbc6d8..62b9677 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -47,6 +47,8 @@
select GENERIC_GPIO
select ARCH_WANT_OPTIONAL_GPIOLIB
select SYS_SUPPORTS_ZBOOT
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
config AR7
bool "Texas Instruments AR7"
@@ -206,6 +208,7 @@
select SYS_HAS_EARLY_PRINTK
select HAVE_PWM
select HAVE_CLK
+ select GENERIC_IRQ_CHIP
config LANTIQ
bool "Lantiq based platforms"
@@ -2092,7 +2095,7 @@
config HW_PERF_EVENTS
bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32
+ depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON)
default y
help
Enable hardware performance counter support for perf events. If
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 53e3514..9b4cb00 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -226,7 +226,7 @@
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -xc /dev/null | \
egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
- sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/")
+ sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/")
ifdef CONFIG_64BIT
CHECKFLAGS += -m64
endif
@@ -295,7 +295,9 @@
install:
$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+ifdef CONFIG_SYS_SUPPORTS_ZBOOT
$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
+endif
$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 2ccfd4a..2a68be6 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -18,20 +18,20 @@
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_BOSPORUS
bool "Alchemy Bosporus board"
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1000
bool "Alchemy DB1000 board"
- select SOC_AU1000
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -39,14 +39,14 @@
config MIPS_DB1100
bool "Alchemy DB1100 board"
- select SOC_AU1100
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1200
bool "Alchemy DB1200 board"
- select SOC_AU1200
+ select ALCHEMY_GPIOINT_AU1000
select DMA_COHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -54,7 +54,7 @@
config MIPS_DB1500
bool "Alchemy DB1500 board"
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
@@ -64,7 +64,7 @@
config MIPS_DB1550
bool "Alchemy DB1550 board"
- select SOC_AU1550
+ select ALCHEMY_GPIOINT_AU1000
select HW_HAS_PCI
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
@@ -74,13 +74,13 @@
config MIPS_MIRAGE
bool "Alchemy Mirage board"
select DMA_NONCOHERENT
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_PB1000
bool "Alchemy PB1000 board"
- select SOC_AU1000
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SWAP_IO_SPACE
@@ -89,7 +89,7 @@
config MIPS_PB1100
bool "Alchemy PB1100 board"
- select SOC_AU1100
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SWAP_IO_SPACE
@@ -98,7 +98,7 @@
config MIPS_PB1200
bool "Alchemy PB1200 board"
- select SOC_AU1200
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -106,7 +106,7 @@
config MIPS_PB1500
bool "Alchemy PB1500 board"
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -114,7 +114,7 @@
config MIPS_PB1550
bool "Alchemy PB1550 board"
- select SOC_AU1550
+ select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select MIPS_DISABLE_OBSOLETE_IDE
@@ -124,13 +124,13 @@
config MIPS_XXS1500
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
- select SOC_AU1500
+ select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_GPR
bool "Trapeze ITS GPR board"
- select SOC_AU1550
+ select ALCHEMY_GPIOINT_AU1000
select HW_HAS_PCI
select DMA_NONCOHERENT
select MIPS_DISABLE_OBSOLETE_IDE
@@ -138,23 +138,3 @@
select SYS_HAS_EARLY_PRINTK
endchoice
-
-config SOC_AU1000
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1100
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1500
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1550
- bool
- select ALCHEMY_GPIOINT_AU1000
-
-config SOC_AU1200
- bool
- select ALCHEMY_GPIOINT_AU1000
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index 27811fe..811ece7 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -12,9 +12,5 @@
# optional gpiolib support
ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
- ifeq ($(CONFIG_GPIOLIB),y)
- obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
- endif
+ obj-$(CONFIG_GPIOLIB) += gpiolib.o
endif
-
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 3a5abb5..0e63ee4 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -40,8 +40,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-
/*
* The Descriptor Based DMA supports up to 16 channels.
*
@@ -62,120 +60,96 @@
(dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR);
static int dbdma_initialized;
-static dbdev_tab_t dbdev_tab[] = {
-#ifdef CONFIG_SOC_AU1550
+static dbdev_tab_t *dbdev_tab;
+
+static dbdev_tab_t au1550_dbdev_tab[] __initdata = {
/* UARTS */
- { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
- { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
- { DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
- { DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
+ { AU1550_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+ { AU1550_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
+ { AU1550_DSCR_CMD0_UART3_TX, DEV_FLAGS_OUT, 0, 8, 0x11400004, 0, 0 },
+ { AU1550_DSCR_CMD0_UART3_RX, DEV_FLAGS_IN, 0, 8, 0x11400000, 0, 0 },
/* EXT DMA */
- { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ2, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_DMA_REQ3, 0, 0, 0, 0x00000000, 0, 0 },
/* USB DEV */
- { DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
- { DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
- { DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
- { DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
- { DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
- { DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_RX0, DEV_FLAGS_IN, 4, 8, 0x10200000, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_TX0, DEV_FLAGS_OUT, 4, 8, 0x10200004, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_TX1, DEV_FLAGS_OUT, 4, 8, 0x10200008, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_TX2, DEV_FLAGS_OUT, 4, 8, 0x1020000c, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_RX3, DEV_FLAGS_IN, 4, 8, 0x10200010, 0, 0 },
+ { AU1550_DSCR_CMD0_USBDEV_RX4, DEV_FLAGS_IN, 4, 8, 0x10200014, 0, 0 },
- /* PSC 0 */
- { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+ /* PSCs */
+ { AU1550_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
+ { AU1550_DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
- /* PSC 1 */
- { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 0, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 },
-
- /* PSC 2 */
- { DSCR_CMD0_PSC2_TX, DEV_FLAGS_OUT, 0, 0, 0x10a0001c, 0, 0 },
- { DSCR_CMD0_PSC2_RX, DEV_FLAGS_IN, 0, 0, 0x10a0001c, 0, 0 },
-
- /* PSC 3 */
- { DSCR_CMD0_PSC3_TX, DEV_FLAGS_OUT, 0, 0, 0x10b0001c, 0, 0 },
- { DSCR_CMD0_PSC3_RX, DEV_FLAGS_IN, 0, 0, 0x10b0001c, 0, 0 },
-
- { DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
- { DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
+ { AU1550_DSCR_CMD0_PCI_WRITE, 0, 0, 0, 0x00000000, 0, 0 }, /* PCI */
+ { AU1550_DSCR_CMD0_NAND_FLASH, 0, 0, 0, 0x00000000, 0, 0 }, /* NAND */
/* MAC 0 */
- { DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_MAC0_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_MAC0_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
/* MAC 1 */
- { DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
-
-#endif /* CONFIG_SOC_AU1550 */
-
-#ifdef CONFIG_SOC_AU1200
- { DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
- { DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
- { DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
- { DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
-
- { DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
-
- { DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
- { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
- { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
- { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
- { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
-
- { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
- { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
-
- { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
- { DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
- { DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
- { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
- { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
- { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
- { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
- { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
- { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-
-#endif /* CONFIG_SOC_AU1200 */
+ { AU1550_DSCR_CMD0_MAC1_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+ { AU1550_DSCR_CMD0_MAC1_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
- { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
-
- /* Provide 16 user definable device types */
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
- { ~0, 0, 0, 0, 0, 0, 0 },
+ { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
};
-#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
+static dbdev_tab_t au1200_dbdev_tab[] __initdata = {
+ { AU1200_DSCR_CMD0_UART0_TX, DEV_FLAGS_OUT, 0, 8, 0x11100004, 0, 0 },
+ { AU1200_DSCR_CMD0_UART0_RX, DEV_FLAGS_IN, 0, 8, 0x11100000, 0, 0 },
+ { AU1200_DSCR_CMD0_UART1_TX, DEV_FLAGS_OUT, 0, 8, 0x11200004, 0, 0 },
+ { AU1200_DSCR_CMD0_UART1_RX, DEV_FLAGS_IN, 0, 8, 0x11200000, 0, 0 },
+ { AU1200_DSCR_CMD0_DMA_REQ0, 0, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_DMA_REQ1, 0, 0, 0, 0x00000000, 0, 0 },
+
+ { AU1200_DSCR_CMD0_MAE_BE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_MAE_FE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+ { AU1200_DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 },
+ { AU1200_DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 },
+ { AU1200_DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 },
+ { AU1200_DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 },
+
+ { AU1200_DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 },
+ { AU1200_DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 },
+
+ { AU1200_DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 16, 0x11a0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 16, 0x11a0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC0_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC1_TX, DEV_FLAGS_OUT, 0, 16, 0x11b0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 16, 0x11b0001c, 0, 0 },
+ { AU1200_DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+ { AU1200_DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 },
+ { AU1200_DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 },
+ { AU1200_DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 },
+ { AU1200_DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+
+ { AU1200_DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
+
+ { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+ { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
+};
+
+/* 32 predefined plus 32 custom */
+#define DBDEV_TAB_SIZE 64
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
@@ -1028,38 +1002,43 @@
.resume = alchemy_dbdma_resume,
};
-static int __init au1xxx_dbdma_init(void)
+static int __init dbdma_setup(unsigned int irq, dbdev_tab_t *idtable)
{
- int irq_nr, ret;
+ int ret;
+
+ dbdev_tab = kzalloc(sizeof(dbdev_tab_t) * DBDEV_TAB_SIZE, GFP_KERNEL);
+ if (!dbdev_tab)
+ return -ENOMEM;
+
+ memcpy(dbdev_tab, idtable, 32 * sizeof(dbdev_tab_t));
+ for (ret = 32; ret < DBDEV_TAB_SIZE; ret++)
+ dbdev_tab[ret].dev_id = ~0;
dbdma_gptr->ddma_config = 0;
dbdma_gptr->ddma_throttle = 0;
dbdma_gptr->ddma_inten = 0xffff;
au_sync();
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1550:
- irq_nr = AU1550_DDMA_INT;
- break;
- case ALCHEMY_CPU_AU1200:
- irq_nr = AU1200_DDMA_INT;
- break;
- default:
- return -ENODEV;
- }
-
- ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
- "Au1xxx dbdma", (void *)dbdma_gptr);
+ ret = request_irq(irq, dbdma_interrupt, IRQF_DISABLED, "dbdma",
+ (void *)dbdma_gptr);
if (ret)
printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
else {
dbdma_initialized = 1;
- printk(KERN_INFO "Alchemy DBDMA initialized\n");
register_syscore_ops(&alchemy_dbdma_syscore_ops);
}
return ret;
}
-subsys_initcall(au1xxx_dbdma_init);
-#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
+static int __init alchemy_dbdma_init(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1550:
+ return dbdma_setup(AU1550_DDMA_INT, au1550_dbdev_tab);
+ case ALCHEMY_CPU_AU1200:
+ return dbdma_setup(AU1200_DDMA_INT, au1200_dbdev_tab);
+ }
+ return 0;
+}
+subsys_initcall(alchemy_dbdma_init);
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c
index 347980e..9b624e2 100644
--- a/arch/mips/alchemy/common/dma.c
+++ b/arch/mips/alchemy/common/dma.c
@@ -40,8 +40,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
- defined(CONFIG_SOC_AU1100)
/*
* A note on resource allocation:
*
@@ -88,12 +86,12 @@
{ AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */
{ AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */
{ AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */
- { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
- { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
- { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
- { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
- { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
- { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */
+ { AU1000_USB_UDC_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */
/* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */
{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */
{ AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */
@@ -170,13 +168,13 @@
const struct dma_dev *dev;
int i, ret;
-#if defined(CONFIG_SOC_AU1100)
- if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
- return -EINVAL;
-#else
- if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
- return -EINVAL;
-#endif
+ if (alchemy_get_cputype() == ALCHEMY_CPU_AU1100) {
+ if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
+ return -EINVAL;
+ } else {
+ if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+ return -EINVAL;
+ }
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
if (au1000_dma_table[i].dev_id < 0)
@@ -239,30 +237,28 @@
static int __init au1000_dma_init(void)
{
- int base, i;
+ int base, i;
- switch (alchemy_get_cputype()) {
- case ALCHEMY_CPU_AU1000:
- base = AU1000_DMA_INT_BASE;
- break;
- case ALCHEMY_CPU_AU1500:
- base = AU1500_DMA_INT_BASE;
- break;
- case ALCHEMY_CPU_AU1100:
- base = AU1100_DMA_INT_BASE;
- break;
- default:
- goto out;
- }
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ base = AU1000_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1500:
+ base = AU1500_DMA_INT_BASE;
+ break;
+ case ALCHEMY_CPU_AU1100:
+ base = AU1100_DMA_INT_BASE;
+ break;
+ default:
+ goto out;
+ }
- for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
- au1000_dma_table[i].irq = base + i;
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+ au1000_dma_table[i].irq = base + i;
- printk(KERN_INFO "Alchemy DMA initialized\n");
+ printk(KERN_INFO "Alchemy DMA initialized\n");
out:
- return 0;
+ return 0;
}
arch_initcall(au1000_dma_init);
-
-#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib.c
similarity index 83%
rename from arch/mips/alchemy/common/gpiolib-au1000.c
rename to arch/mips/alchemy/common/gpiolib.c
index c8e1a94..91fb4d9 100644
--- a/arch/mips/alchemy/common/gpiolib-au1000.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) 2007-2009, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- * GPIOLIB support for Au1000, Au1500, Au1100, Au1550 and Au12x0.
+ * GPIOLIB support for Alchemy chips.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -23,18 +23,18 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Notes :
- * au1000 SoC have only one GPIO block : GPIO1
- * Au1100, Au15x0, Au12x0 have a second one : GPIO2
+ * This file must ONLY be built when CONFIG_GPIOLIB=y and
+ * CONFIG_ALCHEMY_GPIO_INDIRECT=n, otherwise compilation will fail!
+ * au1000 SoC have only one GPIO block : GPIO1
+ * Au1100, Au15x0, Au12x0 have a second one : GPIO2
*/
+#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/platform_device.h>
#include <linux/gpio.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
static int gpio2_get(struct gpio_chip *chip, unsigned offset)
{
@@ -115,12 +115,19 @@
},
};
-static int __init alchemy_gpiolib_init(void)
+static int __init alchemy_gpiochip_init(void)
{
- gpiochip_add(&alchemy_gpio_chip[0]);
- if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
- gpiochip_add(&alchemy_gpio_chip[1]);
+ int ret = 0;
- return 0;
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ ret = gpiochip_add(&alchemy_gpio_chip[0]);
+ break;
+ case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
+ ret = gpiochip_add(&alchemy_gpio_chip[0]);
+ ret |= gpiochip_add(&alchemy_gpio_chip[1]);
+ break;
+ }
+ return ret;
}
-arch_initcall(alchemy_gpiolib_init);
+arch_initcall(alchemy_gpiochip_init);
diff --git a/arch/mips/alchemy/common/pci.c b/arch/mips/alchemy/common/pci.c
deleted file mode 100644
index 7866cf5..0000000
--- a/arch/mips/alchemy/common/pci.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 PCI support.
- *
- * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * Support for all devices (greater than 16) added by David Gathright.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-/* TBD */
-static struct resource pci_io_resource = {
- .start = PCI_IO_START,
- .end = PCI_IO_END,
- .name = "PCI IO space",
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .start = PCI_MEM_START,
- .end = PCI_MEM_END,
- .name = "PCI memory space",
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops au1x_pci_ops;
-
-static struct pci_controller au1x_controller = {
- .pci_ops = &au1x_pci_ops,
- .io_resource = &pci_io_resource,
- .mem_resource = &pci_mem_resource,
-};
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-static unsigned long virt_io_addr;
-#endif
-
-static int __init au1x_pci_setup(void)
-{
- extern void au1x_pci_cfg_init(void);
-
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
- virt_io_addr = (unsigned long)ioremap(Au1500_PCI_IO_START,
- Au1500_PCI_IO_END - Au1500_PCI_IO_START + 1);
-
- if (!virt_io_addr) {
- printk(KERN_ERR "Unable to ioremap pci space\n");
- return 1;
- }
- au1x_controller.io_map_base = virt_io_addr;
-
-#ifdef CONFIG_DMA_NONCOHERENT
- {
- /*
- * Set the NC bit in controller for Au1500 pre-AC silicon
- */
- u32 prid = read_c0_prid();
-
- if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
- au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
- Au1500_PCI_CFG);
- printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
- }
- }
-#endif
-
- set_io_port_base(virt_io_addr);
-#endif
-
- au1x_pci_cfg_init();
-
- register_pci_controller(&au1x_controller);
- return 0;
-}
-
-arch_initcall(au1x_pci_setup);
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index f72c48d..c8e5d72 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -18,7 +18,7 @@
#include <linux/serial_8250.h>
#include <linux/slab.h>
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-au1x00/au1xxx_eth.h>
@@ -111,270 +111,87 @@
printk(KERN_INFO "Alchemy: failed to register UARTs\n");
}
-/* OHCI (USB full speed host controller) */
-static struct resource au1xxx_usb_ohci_resources[] = {
- [0] = {
- .start = USB_OHCI_BASE,
- .end = USB_OHCI_BASE + USB_OHCI_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = FOR_PLATFORM_C_USB_HOST_INT,
- .end = FOR_PLATFORM_C_USB_HOST_INT,
- .flags = IORESOURCE_IRQ,
- },
+
+/* The dmamask must be set for OHCI/EHCI to work */
+static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
+static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
+
+static unsigned long alchemy_ohci_data[][2] __initdata = {
+ [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
+ [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
};
-/* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1xxx_usb_ohci_device = {
- .name = "au1xxx-ohci",
- .id = 0,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources),
- .resource = au1xxx_usb_ohci_resources,
+static unsigned long alchemy_ehci_data[][2] __initdata = {
+ [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
};
-/*** AU1100 LCD controller ***/
-
-#ifdef CONFIG_FB_AU1100
-static struct resource au1100_lcd_resources[] = {
- [0] = {
- .start = LCD_PHYS_ADDR,
- .end = LCD_PHYS_ADDR + 0x800 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1100_LCD_INT,
- .end = AU1100_LCD_INT,
- .flags = IORESOURCE_IRQ,
+static int __init _new_usbres(struct resource **r, struct platform_device **d)
+{
+ *r = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+ if (!*r)
+ return -ENOMEM;
+ *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+ if (!*d) {
+ kfree(*r);
+ return -ENOMEM;
}
-};
-static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+ (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ (*d)->num_resources = 2;
+ (*d)->resource = *r;
-static struct platform_device au1100_lcd_device = {
- .name = "au1100-lcd",
- .id = 0,
- .dev = {
- .dma_mask = &au1100_lcd_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1100_lcd_resources),
- .resource = au1100_lcd_resources,
-};
-#endif
+ return 0;
+}
-#ifdef CONFIG_SOC_AU1200
-/* EHCI (USB high speed host controller) */
-static struct resource au1xxx_usb_ehci_resources[] = {
- [0] = {
- .start = USB_EHCI_BASE,
- .end = USB_EHCI_BASE + USB_EHCI_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_USB_INT,
- .end = AU1200_USB_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
+static void __init alchemy_setup_usb(int ctype)
+{
+ struct resource *res;
+ struct platform_device *pdev;
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
+ /* setup OHCI0. Every variant has one */
+ if (_new_usbres(&res, &pdev))
+ return;
-static struct platform_device au1xxx_usb_ehci_device = {
- .name = "au1xxx-ehci",
- .id = 0,
- .dev = {
- .dma_mask = &ehci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources),
- .resource = au1xxx_usb_ehci_resources,
-};
+ res[0].start = alchemy_ohci_data[ctype][0];
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = alchemy_ohci_data[ctype][1];
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "au1xxx-ohci";
+ pdev->id = 0;
+ pdev->dev.dma_mask = &alchemy_ohci_dmamask;
-/* Au1200 UDC (USB gadget controller) */
-static struct resource au1xxx_usb_gdt_resources[] = {
- [0] = {
- .start = USB_UDC_BASE,
- .end = USB_UDC_BASE + USB_UDC_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_USB_INT,
- .end = AU1200_USB_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
-static u64 udc_dmamask = DMA_BIT_MASK(32);
-static struct platform_device au1xxx_usb_gdt_device = {
- .name = "au1xxx-udc",
- .id = 0,
- .dev = {
- .dma_mask = &udc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources),
- .resource = au1xxx_usb_gdt_resources,
-};
+ /* setup EHCI0: Au1200 */
+ if (ctype == ALCHEMY_CPU_AU1200) {
+ if (_new_usbres(&res, &pdev))
+ return;
-/* Au1200 UOC (USB OTG controller) */
-static struct resource au1xxx_usb_otg_resources[] = {
- [0] = {
- .start = USB_UOC_BASE,
- .end = USB_UOC_BASE + USB_UOC_LEN - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_USB_INT,
- .end = AU1200_USB_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
+ res[0].start = alchemy_ehci_data[ctype][0];
+ res[0].end = res[0].start + 0x100 - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = alchemy_ehci_data[ctype][1];
+ res[1].end = res[1].start;
+ res[1].flags = IORESOURCE_IRQ;
+ pdev->name = "au1xxx-ehci";
+ pdev->id = 0;
+ pdev->dev.dma_mask = &alchemy_ehci_dmamask;
-static u64 uoc_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1xxx_usb_otg_device = {
- .name = "au1xxx-uoc",
- .id = 0,
- .dev = {
- .dma_mask = &uoc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources),
- .resource = au1xxx_usb_otg_resources,
-};
-
-static struct resource au1200_lcd_resources[] = {
- [0] = {
- .start = LCD_PHYS_ADDR,
- .end = LCD_PHYS_ADDR + 0x800 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_LCD_INT,
- .end = AU1200_LCD_INT,
- .flags = IORESOURCE_IRQ,
+ if (platform_device_register(pdev))
+ printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
}
-};
-
-static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device au1200_lcd_device = {
- .name = "au1200-lcd",
- .id = 0,
- .dev = {
- .dma_mask = &au1200_lcd_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(au1200_lcd_resources),
- .resource = au1200_lcd_resources,
-};
-
-static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
-
-extern struct au1xmmc_platform_data au1xmmc_platdata[2];
-
-static struct resource au1200_mmc0_resources[] = {
- [0] = {
- .start = AU1100_SD0_PHYS_ADDR,
- .end = AU1100_SD0_PHYS_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_SD_INT,
- .end = AU1200_SD_INT,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DSCR_CMD0_SDMS_TX0,
- .end = DSCR_CMD0_SDMS_TX0,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DSCR_CMD0_SDMS_RX0,
- .end = DSCR_CMD0_SDMS_RX0,
- .flags = IORESOURCE_DMA,
- }
-};
-
-static struct platform_device au1200_mmc0_device = {
- .name = "au1xxx-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &au1xxx_mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &au1xmmc_platdata[0],
- },
- .num_resources = ARRAY_SIZE(au1200_mmc0_resources),
- .resource = au1200_mmc0_resources,
-};
-
-#ifndef CONFIG_MIPS_DB1200
-static struct resource au1200_mmc1_resources[] = {
- [0] = {
- .start = AU1100_SD1_PHYS_ADDR,
- .end = AU1100_SD1_PHYS_ADDR + 0xfff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AU1200_SD_INT,
- .end = AU1200_SD_INT,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = DSCR_CMD0_SDMS_TX1,
- .end = DSCR_CMD0_SDMS_TX1,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = DSCR_CMD0_SDMS_RX1,
- .end = DSCR_CMD0_SDMS_RX1,
- .flags = IORESOURCE_DMA,
- }
-};
-
-static struct platform_device au1200_mmc1_device = {
- .name = "au1xxx-mmc",
- .id = 1,
- .dev = {
- .dma_mask = &au1xxx_mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &au1xmmc_platdata[1],
- },
- .num_resources = ARRAY_SIZE(au1200_mmc1_resources),
- .resource = au1200_mmc1_resources,
-};
-#endif /* #ifndef CONFIG_MIPS_DB1200 */
-#endif /* #ifdef CONFIG_SOC_AU1200 */
-
-/* All Alchemy demoboards with I2C have this #define in their headers */
-#ifdef SMBUS_PSC_BASE
-static struct resource pbdb_smbus_resources[] = {
- {
- .start = CPHYSADDR(SMBUS_PSC_BASE),
- .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device pbdb_smbus_device = {
- .name = "au1xpsc_smbus",
- .id = 0, /* bus number */
- .num_resources = ARRAY_SIZE(pbdb_smbus_resources),
- .resource = pbdb_smbus_resources,
-};
-#endif
+}
/* Macro to help defining the Ethernet MAC resources */
-#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */
-#define MAC_RES(_base, _enable, _irq) \
+#define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */
+#define MAC_RES(_base, _enable, _irq, _macdma) \
{ \
.start = _base, \
.end = _base + 0xffff, \
@@ -389,28 +206,37 @@
.start = _irq, \
.end = _irq, \
.flags = IORESOURCE_IRQ \
+ }, \
+ { \
+ .start = _macdma, \
+ .end = _macdma + 0x1ff, \
+ .flags = IORESOURCE_MEM, \
}
static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
[ALCHEMY_CPU_AU1000] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
- AU1000_MAC0_DMA_INT)
+ AU1000_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1500] = {
MAC_RES(AU1500_MAC0_PHYS_ADDR,
AU1500_MACEN_PHYS_ADDR,
- AU1500_MAC0_DMA_INT)
+ AU1500_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1100] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
- AU1100_MAC0_DMA_INT)
+ AU1100_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1550] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
- AU1550_MAC0_DMA_INT)
+ AU1550_MAC0_DMA_INT,
+ AU1000_MACDMA0_PHYS_ADDR)
},
};
@@ -429,17 +255,20 @@
[ALCHEMY_CPU_AU1000] = {
MAC_RES(AU1000_MAC1_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR + 4,
- AU1000_MAC1_DMA_INT)
+ AU1000_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1500] = {
MAC_RES(AU1500_MAC1_PHYS_ADDR,
AU1500_MACEN_PHYS_ADDR + 4,
- AU1500_MAC1_DMA_INT)
+ AU1500_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
},
[ALCHEMY_CPU_AU1550] = {
MAC_RES(AU1000_MAC1_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR + 4,
- AU1550_MAC1_DMA_INT)
+ AU1550_MAC1_DMA_INT,
+ AU1000_MACDMA1_PHYS_ADDR)
},
};
@@ -521,36 +350,15 @@
}
}
-static struct platform_device *au1xxx_platform_devices[] __initdata = {
- &au1xxx_usb_ohci_device,
-#ifdef CONFIG_FB_AU1100
- &au1100_lcd_device,
-#endif
-#ifdef CONFIG_SOC_AU1200
- &au1xxx_usb_ehci_device,
- &au1xxx_usb_gdt_device,
- &au1xxx_usb_otg_device,
- &au1200_lcd_device,
- &au1200_mmc0_device,
-#ifndef CONFIG_MIPS_DB1200
- &au1200_mmc1_device,
-#endif
-#endif
-#ifdef SMBUS_PSC_BASE
- &pbdb_smbus_device,
-#endif
-};
-
static int __init au1xxx_platform_init(void)
{
- int err, ctype = alchemy_get_cputype();
+ int ctype = alchemy_get_cputype();
alchemy_setup_uarts(ctype);
alchemy_setup_macs(ctype);
+ alchemy_setup_usb(ctype);
- err = platform_add_devices(au1xxx_platform_devices,
- ARRAY_SIZE(au1xxx_platform_devices));
- return err;
+ return 0;
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index b86324a..bdd6651 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -37,8 +37,6 @@
#include <asm/uaccess.h>
#include <asm/mach-au1x00/au1000.h>
-#ifdef CONFIG_PM
-
/*
* We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
@@ -49,7 +47,6 @@
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
-static unsigned int sleep_usb[2];
static unsigned int sleep_sys_clocks[5];
static unsigned int sleep_sys_pinfunc;
static unsigned int sleep_static_memctlr[4][3];
@@ -57,31 +54,6 @@
static void save_core_regs(void)
{
-#ifndef CONFIG_SOC_AU1200
- /* Shutdown USB host/device. */
- sleep_usb[0] = au_readl(USB_HOST_CONFIG);
-
- /* There appears to be some undocumented reset register.... */
- au_writel(0, 0xb0100004);
- au_sync();
- au_writel(0, USB_HOST_CONFIG);
- au_sync();
-
- sleep_usb[1] = au_readl(USBD_ENABLE);
- au_writel(0, USBD_ENABLE);
- au_sync();
-
-#else /* AU1200 */
-
- /* enable access to OTG mmio so we can save OTG CAP/MUX.
- * FIXME: write an OTG driver and move this stuff there!
- */
- au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
- au_sync();
- sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */
- sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */
-#endif
-
/* Clocks and PLLs. */
sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -125,22 +97,6 @@
au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
au_sync();
-#ifndef CONFIG_SOC_AU1200
- au_writel(sleep_usb[0], USB_HOST_CONFIG);
- au_writel(sleep_usb[1], USBD_ENABLE);
- au_sync();
-#else
- /* enable access to OTG memory */
- au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
- au_sync();
-
- /* restore OTG caps and port mux. */
- au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */
- au_sync();
- au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */
- au_sync();
-#endif
-
/* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
@@ -174,5 +130,3 @@
restore_core_regs();
}
-
-#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1b887c8..37ffd99 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -73,8 +73,8 @@
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
- u32 start = (u32)Au1500_PCI_MEM_START;
- u32 end = (u32)Au1500_PCI_MEM_END;
+ unsigned long start = ALCHEMY_PCI_MEMWIN_START;
+ unsigned long end = ALCHEMY_PCI_MEMWIN_END;
/* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
@@ -82,7 +82,7 @@
/* Check for PCI memory window */
if (phys_addr >= start && (phys_addr + size - 1) <= end)
- return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
+ return (phys_t)(AU1500_PCI_MEM_PHYS_ADDR + phys_addr);
/* default nop */
return phys_addr;
diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c
index dda090b..c61867c 100644
--- a/arch/mips/alchemy/devboards/db1200/platform.c
+++ b/arch/mips/alchemy/devboards/db1200/platform.c
@@ -213,7 +213,12 @@
.start = DB1200_IDE_INT,
.end = DB1200_IDE_INT,
.flags = IORESOURCE_IRQ,
- }
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_DMA_REQ1,
+ .end = AU1200_DSCR_CMD0_DMA_REQ1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -328,23 +333,85 @@
.brightness_set = db1200_mmcled_set,
};
-/* needed by arch/mips/alchemy/common/platform.c */
-struct au1xmmc_platform_data au1xmmc_platdata[] = {
+static struct au1xmmc_platform_data db1200mmc_platdata = {
+ .cd_setup = db1200_mmc_cd_setup,
+ .set_power = db1200_mmc_set_power,
+ .card_inserted = db1200_mmc_card_inserted,
+ .card_readonly = db1200_mmc_card_readonly,
+ .led = &db1200_mmc_led,
+};
+
+static struct resource au1200_mmc0_resources[] = {
[0] = {
- .cd_setup = db1200_mmc_cd_setup,
- .set_power = db1200_mmc_set_power,
- .card_inserted = db1200_mmc_card_inserted,
- .card_readonly = db1200_mmc_card_readonly,
- .led = &db1200_mmc_led,
+ .start = AU1100_SD0_PHYS_ADDR,
+ .end = AU1100_SD0_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
},
+ [1] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_SDMS_TX0,
+ .end = AU1200_DSCR_CMD0_SDMS_TX0,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_SDMS_RX0,
+ .end = AU1200_DSCR_CMD0_SDMS_RX0,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device db1200_mmc0_dev = {
+ .name = "au1xxx-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &db1200mmc_platdata,
+ },
+ .num_resources = ARRAY_SIZE(au1200_mmc0_resources),
+ .resource = au1200_mmc0_resources,
+};
+
+/**********************************************************************/
+
+static struct resource au1200_lcd_res[] = {
+ [0] = {
+ .start = AU1200_LCD_PHYS_ADDR,
+ .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_LCD_INT,
+ .end = AU1200_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+ .name = "au1200-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1200_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(au1200_lcd_res),
+ .resource = au1200_lcd_res,
};
/**********************************************************************/
static struct resource au1200_psc0_res[] = {
[0] = {
- .start = PSC0_PHYS_ADDR,
- .end = PSC0_PHYS_ADDR + 0x000fffff,
+ .start = AU1550_PSC0_PHYS_ADDR,
+ .end = AU1550_PSC0_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -353,13 +420,13 @@
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = DSCR_CMD0_PSC0_TX,
- .end = DSCR_CMD0_PSC0_TX,
+ .start = AU1200_DSCR_CMD0_PSC0_TX,
+ .end = AU1200_DSCR_CMD0_PSC0_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
- .start = DSCR_CMD0_PSC0_RX,
- .end = DSCR_CMD0_PSC0_RX,
+ .start = AU1200_DSCR_CMD0_PSC0_RX,
+ .end = AU1200_DSCR_CMD0_PSC0_RX,
.flags = IORESOURCE_DMA,
},
};
@@ -401,8 +468,8 @@
static struct resource au1200_psc1_res[] = {
[0] = {
- .start = PSC1_PHYS_ADDR,
- .end = PSC1_PHYS_ADDR + 0x000fffff,
+ .start = AU1550_PSC1_PHYS_ADDR,
+ .end = AU1550_PSC1_PHYS_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -411,13 +478,13 @@
.flags = IORESOURCE_IRQ,
},
[2] = {
- .start = DSCR_CMD0_PSC1_TX,
- .end = DSCR_CMD0_PSC1_TX,
+ .start = AU1200_DSCR_CMD0_PSC1_TX,
+ .end = AU1200_DSCR_CMD0_PSC1_TX,
.flags = IORESOURCE_DMA,
},
[3] = {
- .start = DSCR_CMD0_PSC1_RX,
- .end = DSCR_CMD0_PSC1_RX,
+ .start = AU1200_DSCR_CMD0_PSC1_RX,
+ .end = AU1200_DSCR_CMD0_PSC1_RX,
.flags = IORESOURCE_DMA,
},
};
@@ -449,6 +516,8 @@
static struct platform_device *db1200_devs[] __initdata = {
NULL, /* PSC0, selected by S6.8 */
&db1200_ide_dev,
+ &db1200_mmc0_dev,
+ &au1200_lcd_dev,
&db1200_eth_dev,
&db1200_rtc_dev,
&db1200_nand_dev,
@@ -526,32 +595,28 @@
/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
__raw_writel(PSC_SEL_CLK_SERCLK,
- (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+ (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
wmb();
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- DB1200_PC0_INT,
- DB1200_PC0_INSERT_INT,
- /*DB1200_PC0_STSCHG_INT*/0,
- DB1200_PC0_EJECT_INT,
- 0);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
+ /*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x004000000,
- PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x004000000,
- PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
- DB1200_PC1_INT,
- DB1200_PC1_INSERT_INT,
- /*DB1200_PC1_STSCHG_INT*/0,
- DB1200_PC1_EJECT_INT,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
+ DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
+ /*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
db1x_register_norflash(64 << 20, 2, swapped);
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 5c956fe..7cd36e6 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -40,24 +40,6 @@
#include <prom.h>
-#ifdef CONFIG_MIPS_DB1500
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */
- [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-#endif
-
-
-#ifdef CONFIG_MIPS_DB1550
-char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */
@@ -91,12 +73,6 @@
#ifdef CONFIG_MIPS_MIRAGE
-char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
- [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
- [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
-};
-
static void mirage_power_off(void)
{
alchemy_gpio_direction_output(210, 1);
@@ -158,9 +134,7 @@
/* initialize board register space */
bcsr_init(bcsr1, bcsr2);
- /* Not valid for Au1550 */
-#if defined(CONFIG_IRDA) && \
- (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+#if defined(CONFIG_IRDA) && defined(CONFIG_AU1000_FIR)
{
u32 pin_func;
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
index 7057d28..9e6b3d4 100644
--- a/arch/mips/alchemy/devboards/db1x00/platform.c
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -20,14 +20,16 @@
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+struct pci_dev;
+
/* DB1xxx PCMCIA interrupt sources:
* CD0/1 GPIO0/3
* STSCHG0/1 GPIO1/4
@@ -88,6 +90,155 @@
#endif
#endif
+#ifdef CONFIG_PCI
+#ifdef CONFIG_MIPS_DB1500
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 12) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12)
+ return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 11) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 11)
+ return (pin == 1) ? AU1550_PCI_INTC : 0xff;
+ if (slot == 12) {
+ switch (pin) {
+ case 1: return AU1550_PCI_INTB;
+ case 2: return AU1550_PCI_INTC;
+ case 3: return AU1550_PCI_INTD;
+ case 4: return AU1550_PCI_INTA;
+ }
+ }
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1550_PCI_INTA;
+ case 2: return AU1550_PCI_INTB;
+ case 3: return AU1550_PCI_INTC;
+ case 4: return AU1550_PCI_INTD;
+ }
+ }
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 11) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12)
+ return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+ if (slot == 11) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ default: return 0xff;
+ }
+ }
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+static int db1xxx_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 11) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 11)
+ return (pin == 1) ? AU1500_PCI_INTD : 0xff;
+ if (slot == 12)
+ return (pin == 3) ? AU1500_PCI_INTC : 0xff;
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ default: return 0xff;
+ }
+ }
+ return -1;
+}
+#endif
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct alchemy_pci_platdata db1xxx_pci_pd = {
+ .board_map_irq = db1xxx_map_pci_irq,
+};
+
+static struct platform_device db1xxx_pci_host_dev = {
+ .dev.platform_data = &db1xxx_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+static int __init db15x0_pci_init(void)
+{
+ return platform_device_register(&db1xxx_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(db15x0_pci_init);
+#endif
+
+#ifdef CONFIG_MIPS_DB1100
+static struct resource au1100_lcd_resources[] = {
+ [0] = {
+ .start = AU1100_LCD_PHYS_ADDR,
+ .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1100_LCD_INT,
+ .end = AU1100_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+ .name = "au1100-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1100_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(au1100_lcd_resources),
+ .resource = au1100_lcd_resources,
+};
+#endif
+
static struct resource alchemy_ac97c_res[] = {
[0] = {
.start = AU1000_AC97_PHYS_ADDR,
@@ -130,29 +281,28 @@
static int __init db1xxx_dev_init(void)
{
#ifdef DB1XXX_HAS_PCMCIA
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- DB1XXX_PCMCIA_CARD0,
- DB1XXX_PCMCIA_CD0,
- /*DB1XXX_PCMCIA_STSCHG0*/0,
- 0,
- 0);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ DB1XXX_PCMCIA_CARD0, DB1XXX_PCMCIA_CD0,
+ /*DB1XXX_PCMCIA_STSCHG0*/0, 0, 0);
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x004000000,
- PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x004000000,
- PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
- DB1XXX_PCMCIA_CARD1,
- DB1XXX_PCMCIA_CD1,
- /*DB1XXX_PCMCIA_STSCHG1*/0,
- 0,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
+ DB1XXX_PCMCIA_CARD1, DB1XXX_PCMCIA_CD1,
+ /*DB1XXX_PCMCIA_STSCHG1*/0, 0, 1);
+#endif
+#ifdef CONFIG_MIPS_DB1100
+ platform_device_register(&au1100_lcd_device);
#endif
db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c
index 2c8dc29..9c57c01 100644
--- a/arch/mips/alchemy/devboards/pb1100/platform.c
+++ b/arch/mips/alchemy/devboards/pb1100/platform.c
@@ -19,31 +19,58 @@
*/
#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+static struct resource au1100_lcd_resources[] = {
+ [0] = {
+ .start = AU1100_LCD_PHYS_ADDR,
+ .end = AU1100_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1100_LCD_INT,
+ .end = AU1100_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1100_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1100_lcd_device = {
+ .name = "au1100-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1100_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(au1100_lcd_resources),
+ .resource = au1100_lcd_resources,
+};
+
static int __init pb1100_dev_init(void)
{
int swapped;
/* PCMCIA. single socket, identical to Pb1500 */
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- AU1100_GPIO11_INT, /* card */
- AU1100_GPIO9_INT, /* insert */
- /*AU1100_GPIO10_INT*/0, /* stschg */
- 0, /* eject */
- 0); /* id */
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1100_GPIO11_INT, AU1100_GPIO9_INT, /* card / insert */
+ /*AU1100_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+ platform_device_register(&au1100_lcd_device);
return 0;
}
diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
index 3ef2dce..54f7f7b 100644
--- a/arch/mips/alchemy/devboards/pb1200/platform.c
+++ b/arch/mips/alchemy/devboards/pb1200/platform.c
@@ -24,9 +24,11 @@
#include <linux/platform_device.h>
#include <linux/smc91x.h>
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-pb1x00/pb1200.h>
#include "../platform.h"
@@ -88,7 +90,7 @@
return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
}
-const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
+static struct au1xmmc_platform_data pb1200mmc_platdata[2] = {
[0] = {
.set_power = pb1200mmc0_set_power,
.card_inserted = pb1200mmc0_card_inserted,
@@ -105,6 +107,79 @@
},
};
+static u64 au1xxx_mmc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource au1200_mmc0_res[] = {
+ [0] = {
+ .start = AU1100_SD0_PHYS_ADDR,
+ .end = AU1100_SD0_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_SDMS_TX0,
+ .end = AU1200_DSCR_CMD0_SDMS_TX0,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_SDMS_RX0,
+ .end = AU1200_DSCR_CMD0_SDMS_RX0,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static struct platform_device pb1200_mmc0_dev = {
+ .name = "au1xxx-mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &pb1200mmc_platdata[0],
+ },
+ .num_resources = ARRAY_SIZE(au1200_mmc0_res),
+ .resource = au1200_mmc0_res,
+};
+
+static struct resource au1200_mmc1_res[] = {
+ [0] = {
+ .start = AU1100_SD1_PHYS_ADDR,
+ .end = AU1100_SD1_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_SD_INT,
+ .end = AU1200_SD_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_SDMS_TX1,
+ .end = AU1200_DSCR_CMD0_SDMS_TX1,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_SDMS_RX1,
+ .end = AU1200_DSCR_CMD0_SDMS_RX1,
+ .flags = IORESOURCE_DMA,
+ }
+};
+
+static struct platform_device pb1200_mmc1_dev = {
+ .name = "au1xxx-mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &au1xxx_mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &pb1200mmc_platdata[1],
+ },
+ .num_resources = ARRAY_SIZE(au1200_mmc1_res),
+ .resource = au1200_mmc1_res,
+};
+
+
static struct resource ide_resources[] = {
[0] = {
.start = IDE_PHYS_ADDR,
@@ -115,7 +190,12 @@
.start = IDE_INT,
.end = IDE_INT,
.flags = IORESOURCE_IRQ
- }
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_DMA_REQ1,
+ .end = AU1200_DSCR_CMD0_DMA_REQ1,
+ .flags = IORESOURCE_DMA,
+ },
};
static u64 ide_dmamask = DMA_BIT_MASK(32);
@@ -161,38 +241,94 @@
.resource = smc91c111_resources
};
+static struct resource au1200_psc0_res[] = {
+ [0] = {
+ .start = AU1550_PSC0_PHYS_ADDR,
+ .end = AU1550_PSC0_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_PSC0_INT,
+ .end = AU1200_PSC0_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1200_DSCR_CMD0_PSC0_TX,
+ .end = AU1200_DSCR_CMD0_PSC0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1200_DSCR_CMD0_PSC0_RX,
+ .end = AU1200_DSCR_CMD0_PSC0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device pb1200_i2c_dev = {
+ .name = "au1xpsc_smbus",
+ .id = 0, /* bus number */
+ .num_resources = ARRAY_SIZE(au1200_psc0_res),
+ .resource = au1200_psc0_res,
+};
+
+static struct resource au1200_lcd_res[] = {
+ [0] = {
+ .start = AU1200_LCD_PHYS_ADDR,
+ .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1200_LCD_INT,
+ .end = AU1200_LCD_INT,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 au1200_lcd_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device au1200_lcd_dev = {
+ .name = "au1200-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &au1200_lcd_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(au1200_lcd_res),
+ .resource = au1200_lcd_res,
+};
+
static struct platform_device *board_platform_devices[] __initdata = {
&ide_device,
- &smc91c111_device
+ &smc91c111_device,
+ &pb1200_i2c_dev,
+ &pb1200_mmc0_dev,
+ &pb1200_mmc1_dev,
+ &au1200_lcd_dev,
};
static int __init board_register_devices(void)
{
int swapped;
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- PB1200_PC0_INT,
- PB1200_PC0_INSERT_INT,
- /*PB1200_PC0_STSCHG_INT*/0,
- PB1200_PC0_EJECT_INT,
- 0);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ PB1200_PC0_INT, PB1200_PC0_INSERT_INT,
+ /*PB1200_PC0_STSCHG_INT*/0, PB1200_PC0_EJECT_INT, 0);
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x008000000,
- PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x008000000,
- PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
- PB1200_PC1_INT,
- PB1200_PC1_INSERT_INT,
- /*PB1200_PC1_STSCHG_INT*/0,
- PB1200_PC1_EJECT_INT,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
+ PB1200_PC1_INT, PB1200_PC1_INSERT_INT,
+ /*PB1200_PC1_STSCHG_INT*/0, PB1200_PC1_EJECT_INT, 1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 3b4fa32..37c1883 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -33,13 +33,6 @@
#include <prom.h>
-
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */
- [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
-};
-
-
const char *get_system_type(void)
{
return "Alchemy Pb1500";
@@ -101,20 +94,18 @@
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
- /* Setup PCI bus controller */
- au_writel(0, Au1500_PCI_CMEM);
- au_writel(0x00003fff, Au1500_CFG_BASE);
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
- au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
- au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
- au_writel(0x02a00356, Au1500_PCI_STATCMD);
- au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
- au_writel(0x00000008, Au1500_PCI_MBAR);
- au_sync();
+ {
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1500_PCI_PHYS_ADDR);
+ /* Setup PCI bus controller */
+ __raw_writel(0x00003fff, base + PCI_REG_CMEM);
+ __raw_writel(0xf0000000, base + PCI_REG_MWMASK_DEV);
+ __raw_writel(0, base + PCI_REG_MWBASE_REV_CCL);
+ __raw_writel(0x02a00356, base + PCI_REG_STATCMD);
+ __raw_writel(0x00003c04, base + PCI_REG_PARAM);
+ __raw_writel(0x00000008, base + PCI_REG_MBAR);
+ wmb();
+ }
#endif
/* Enable sys bus clock divider when IDLE state or no bus activity. */
diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c
index d443bc7..1e52a01 100644
--- a/arch/mips/alchemy/devboards/pb1500/platform.c
+++ b/arch/mips/alchemy/devboards/pb1500/platform.c
@@ -18,32 +18,77 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/dma-mapping.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+static int pb1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 12) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12)
+ return (pin == 1) ? AU1500_PCI_INTA : 0xff;
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct alchemy_pci_platdata pb1500_pci_pd = {
+ .board_map_irq = pb1500_map_pci_irq,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device pb1500_pci_host = {
+ .dev.platform_data = &pb1500_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
static int __init pb1500_dev_init(void)
{
int swapped;
- /* PCMCIA. single socket, identical to Pb1500 */
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- AU1500_GPIO11_INT, /* card */
- AU1500_GPIO9_INT, /* insert */
- /*AU1500_GPIO10_INT*/0, /* stschg */
- 0, /* eject */
- 0); /* id */
+ /* PCMCIA. single socket, identical to Pb1100 */
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1500_GPIO11_INT, AU1500_GPIO9_INT, /* card / insert */
+ /*AU1500_GPIO10_INT*/0, 0, 0); /* stschg / eject / id */
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT;
db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+ platform_device_register(&pb1500_pci_host);
return 0;
}
-device_initcall(pb1500_dev_init);
+arch_initcall(pb1500_dev_init);
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index b790213..0f62d1e 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -37,12 +37,6 @@
#include <prom.h>
-
-char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
const char *get_system_type(void)
{
return "Alchemy Pb1550";
diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c
index d7150d0..a4604b8 100644
--- a/arch/mips/alchemy/devboards/pb1550/platform.c
+++ b/arch/mips/alchemy/devboards/pb1550/platform.c
@@ -18,14 +18,89 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/dma-mapping.h>
#include <linux/init.h>
-
+#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <asm/mach-db1x00/bcsr.h>
#include "../platform.h"
+static int pb1550_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot < 12) || (slot > 13) || pin == 0)
+ return -1;
+ if (slot == 12) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTB;
+ case 2: return AU1500_PCI_INTC;
+ case 3: return AU1500_PCI_INTD;
+ case 4: return AU1500_PCI_INTA;
+ }
+ }
+ if (slot == 13) {
+ switch (pin) {
+ case 1: return AU1500_PCI_INTA;
+ case 2: return AU1500_PCI_INTB;
+ case 3: return AU1500_PCI_INTC;
+ case 4: return AU1500_PCI_INTD;
+ }
+ }
+ return -1;
+}
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct alchemy_pci_platdata pb1550_pci_pd = {
+ .board_map_irq = pb1550_map_pci_irq,
+};
+
+static struct platform_device pb1550_pci_host = {
+ .dev.platform_data = &pb1550_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+static struct resource au1550_psc2_res[] = {
+ [0] = {
+ .start = AU1550_PSC2_PHYS_ADDR,
+ .end = AU1550_PSC2_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AU1550_PSC2_INT,
+ .end = AU1550_PSC2_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = AU1550_DSCR_CMD0_PSC2_TX,
+ .end = AU1550_DSCR_CMD0_PSC2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = AU1550_DSCR_CMD0_PSC2_RX,
+ .end = AU1550_DSCR_CMD0_PSC2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device pb1550_i2c_dev = {
+ .name = "au1xpsc_smbus",
+ .id = 0, /* bus number */
+ .num_resources = ARRAY_SIZE(au1550_psc2_res),
+ .resource = au1550_psc2_res,
+};
+
static int __init pb1550_dev_init(void)
{
int swapped;
@@ -37,33 +112,29 @@
* drivers are used to shared irqs and b) statuschange isn't really use-
* ful anyway.
*/
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
- PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_MEM_PHYS_ADDR,
- PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
- PCMCIA_IO_PHYS_ADDR,
- PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
- AU1550_GPIO201_205_INT,
- AU1550_GPIO0_INT,
- 0,
- 0,
- 0);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
+ AU1550_GPIO201_205_INT, AU1550_GPIO0_INT, 0, 0, 0);
- db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
- PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_MEM_PHYS_ADDR + 0x008000000,
- PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
- PCMCIA_IO_PHYS_ADDR + 0x008000000,
- PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
- AU1550_GPIO201_205_INT,
- AU1550_GPIO1_INT,
- 0,
- 0,
- 1);
+ db1x_register_pcmcia_socket(
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008000000,
+ AU1000_PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1,
+ AU1550_GPIO201_205_INT, AU1550_GPIO1_INT, 0, 0, 1);
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
+ platform_device_register(&pb1550_pci_host);
+ platform_device_register(&pb1550_i2c_dev);
return 0;
}
-device_initcall(pb1550_dev_init);
+arch_initcall(pb1550_dev_init);
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
index 5f8f069..dea45c7 100644
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -36,10 +36,6 @@
#include <prom.h>
-char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
-};
-
static void gpr_reset(char *c)
{
/* switch System-LED to orange (red# and green# on) */
@@ -76,12 +72,4 @@
/* Take away Reset of UMTS-card */
alchemy_gpio_direction_output(215, 1);
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
}
diff --git a/arch/mips/alchemy/gpr/platform.c b/arch/mips/alchemy/gpr/platform.c
index 14b4662..982ce85 100644
--- a/arch/mips/alchemy/gpr/platform.c
+++ b/arch/mips/alchemy/gpr/platform.c
@@ -167,6 +167,45 @@
}
};
+
+
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ if ((slot == 0) && (pin == 1))
+ return AU1550_PCI_INTA;
+ else if ((slot == 0) && (pin == 2))
+ return AU1550_PCI_INTB;
+
+ return -1;
+}
+
+static struct alchemy_pci_platdata gpr_pci_pd = {
+ .board_map_irq = gpr_map_pci_irq,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device gpr_pci_host_dev = {
+ .dev.platform_data = &gpr_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
static struct platform_device *gpr_devices[] __initdata = {
&gpr_wdt_device,
&gpr_mtd_device,
@@ -174,6 +213,14 @@
&gpr_led_devices,
};
+static int __init gpr_pci_init(void)
+{
+ return platform_device_register(&gpr_pci_host_dev);
+}
+/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
+arch_initcall(gpr_pci_init);
+
+
static int __init gpr_dev_init(void)
{
i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3ae984c..851a5ab 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -38,20 +38,6 @@
#include <prom.h>
-char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
-
static void mtx1_reset(char *c)
{
/* Jump to the reset vector */
@@ -74,15 +60,6 @@
alchemy_gpio_direction_output(204, 0);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
- board_pci_idsel = mtx1_pci_idsel;
-#endif
-
/* Initialize sys_pinfunc */
au_writel(SYS_PF_NI2, SYS_PINFUNC);
@@ -104,23 +81,6 @@
printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
-int
-mtx1_pci_idsel(unsigned int devsel, int assert)
-{
- /* This function is only necessary to support a proprietary Cardbus
- * adapter on the mtx-1 "singleboard" variant. It triggers a custom
- * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
- */
- if (assert && devsel != 0)
- /* Suppress signal to Cardbus */
- alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
- else
- alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
-
- udelay(1);
- return 1;
-}
-
static int __init mtx1_init_irq(void)
{
irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c
index 55628e3..cc47b68 100644
--- a/arch/mips/alchemy/mtx-1/platform.c
+++ b/arch/mips/alchemy/mtx-1/platform.c
@@ -135,7 +135,69 @@
.resource = &mtx1_mtd_resource,
};
+static struct resource alchemy_pci_host_res[] = {
+ [0] = {
+ .start = AU1500_PCI_PHYS_ADDR,
+ .end = AU1500_PCI_PHYS_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static int mtx1_pci_idsel(unsigned int devsel, int assert)
+{
+ /* This function is only necessary to support a proprietary Cardbus
+ * adapter on the mtx-1 "singleboard" variant. It triggers a custom
+ * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
+ */
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */
+ else
+ alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */
+
+ udelay(1);
+ return 1;
+}
+
+static const char mtx1_irqtab[][5] = {
+ [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
+static int mtx1_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
+{
+ return mtx1_irqtab[slot][pin];
+}
+
+static struct alchemy_pci_platdata mtx1_pci_pd = {
+ .board_map_irq = mtx1_map_pci_irq,
+ .board_pci_idsel = mtx1_pci_idsel,
+ .pci_cfg_set = PCI_CONFIG_AEN | PCI_CONFIG_R2H | PCI_CONFIG_R1H |
+ PCI_CONFIG_CH |
+#if defined(__MIPSEB__)
+ PCI_CONFIG_SIC_HWA_DAT | PCI_CONFIG_SM,
+#else
+ 0,
+#endif
+};
+
+static struct platform_device mtx1_pci_host = {
+ .dev.platform_data = &mtx1_pci_pd,
+ .name = "alchemy-pci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(alchemy_pci_host_res),
+ .resource = alchemy_pci_host_res,
+};
+
+
static struct __initdata platform_device * mtx1_devs[] = {
+ &mtx1_pci_host,
&mtx1_gpio_leds,
&mtx1_wdt,
&mtx1_button,
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 81e57fa..3fa83f7 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -70,14 +70,6 @@
/* Enable DTR (MCR bit 0) = USB power up */
__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
wmb();
-
-#ifdef CONFIG_PCI
-#if defined(__MIPSEB__)
- au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
-#else
- au_writel(0xf, Au1500_PCI_CFG);
-#endif
-#endif
}
static int __init xxs1500_init_irq(void)
diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c
index e87c45c..06a3a45 100644
--- a/arch/mips/alchemy/xxs1500/platform.c
+++ b/arch/mips/alchemy/xxs1500/platform.c
@@ -27,20 +27,20 @@
{
.name = "pcmcia-io",
.flags = IORESOURCE_MEM,
- .start = PCMCIA_IO_PHYS_ADDR,
- .end = PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+ .start = AU1000_PCMCIA_IO_PHYS_ADDR,
+ .end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
},
{
.name = "pcmcia-attr",
.flags = IORESOURCE_MEM,
- .start = PCMCIA_ATTR_PHYS_ADDR,
- .end = PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+ .start = AU1000_PCMCIA_ATTR_PHYS_ADDR,
+ .end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
},
{
.name = "pcmcia-mem",
.flags = IORESOURCE_MEM,
- .start = PCMCIA_MEM_PHYS_ADDR,
- .end = PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+ .start = AU1000_PCMCIA_MEM_PHYS_ADDR,
+ .end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
},
};
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 40bb9fd..69468de 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -114,4 +114,28 @@
extern void *kmap_coherent(struct page *page, unsigned long addr);
extern void kunmap_coherent(void);
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+ BUG_ON(cpu_has_dc_aliases && PageHighMem(page));
+}
+
+/*
+ * For now flush_kernel_vmap_range and invalidate_kernel_vmap_range both do a
+ * cache writeback and invalidate operation.
+ */
+extern void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+
+static inline void flush_kernel_vmap_range(void *vaddr, int size)
+{
+ if (cpu_has_dc_aliases)
+ __flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
+static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+ if (cpu_has_dc_aliases)
+ __flush_kernel_vmap_range((unsigned long) vaddr, size);
+}
+
#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 5f95a4b..2f7f418 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -135,6 +135,9 @@
#define PRID_IMP_CAVIUM_CN50XX 0x0600
#define PRID_IMP_CAVIUM_CN52XX 0x0700
#define PRID_IMP_CAVIUM_CN63XX 0x9000
+#define PRID_IMP_CAVIUM_CN68XX 0x9100
+#define PRID_IMP_CAVIUM_CN66XX 0x9200
+#define PRID_IMP_CAVIUM_CN61XX 0x9300
/*
* These are the PRID's for when 23:16 == PRID_COMP_INGENIC
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index b04e4de..a58f229 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -329,14 +329,10 @@
"dsrl32 %L0, %L0, 0" "\n\t" \
"dsll32 %M0, %M0, 0" "\n\t" \
"or %L0, %L0, %M0" "\n\t" \
- ".set push" "\n\t" \
- ".set noreorder" "\n\t" \
- ".set nomacro" "\n\t" \
"sd %L0, %2" "\n\t" \
- ".set pop" "\n\t" \
".set mips0" "\n" \
: "=r" (__tmp) \
- : "0" (__val), "R" (*__mem)); \
+ : "0" (__val), "m" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else \
@@ -359,16 +355,12 @@
local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
- ".set push" "\n\t" \
- ".set noreorder" "\n\t" \
- ".set nomacro" "\n\t" \
"ld %L0, %1" "\n\t" \
- ".set pop" "\n\t" \
"dsra32 %M0, %L0, 0" "\n\t" \
"sll %L0, %L0, 0" "\n\t" \
".set mips0" "\n" \
: "=r" (__val) \
- : "R" (*__mem)); \
+ : "m" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else { \
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index f260ebe..de24ec57 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -245,6 +245,23 @@
void alchemy_sleep_au1550(void);
void au_sleep(void);
+/* USB: drivers/usb/host/alchemy-common.c */
+enum alchemy_usb_block {
+ ALCHEMY_USB_OHCI0,
+ ALCHEMY_USB_UDC0,
+ ALCHEMY_USB_EHCI0,
+ ALCHEMY_USB_OTG0,
+};
+int alchemy_usb_control(int block, int enable);
+
+/* PCI controller platform data */
+struct alchemy_pci_platdata {
+ int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+ int (*board_pci_idsel)(unsigned int devsel, int assert);
+ /* bits to set/clear in PCI_CONFIG register */
+ unsigned long pci_cfg_set;
+ unsigned long pci_cfg_clr;
+};
/* SOC Interrupt numbers */
@@ -575,38 +592,95 @@
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*
- * SDRAM register offsets
+ * Physical base addresses for integrated peripherals
+ * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
*/
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
- defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 0x0000
-#define MEM_SDMODE1 0x0004
-#define MEM_SDMODE2 0x0008
-#define MEM_SDADDR0 0x000C
-#define MEM_SDADDR1 0x0010
-#define MEM_SDADDR2 0x0014
-#define MEM_SDREFCFG 0x0018
-#define MEM_SDPRECMD 0x001C
-#define MEM_SDAUTOREF 0x0020
-#define MEM_SDWRMD0 0x0024
-#define MEM_SDWRMD1 0x0028
-#define MEM_SDWRMD2 0x002C
-#define MEM_SDSLEEP 0x0030
-#define MEM_SDSMCKE 0x0034
-/*
- * MEM_SDMODE register content definitions
- */
+#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
+#define AU1000_USB_OHCI_PHYS_ADDR 0x10100000 /* 012 */
+#define AU1000_USB_UDC_PHYS_ADDR 0x10200000 /* 0123 */
+#define AU1000_IRDA_PHYS_ADDR 0x10300000 /* 02 */
+#define AU1200_AES_PHYS_ADDR 0x10300000 /* 4 */
+#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
+#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
+#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
+#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
+#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */
+#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
+#define AU1550_PSC2_PHYS_ADDR 0x10A00000 /* 3 */
+#define AU1550_PSC3_PHYS_ADDR 0x10B00000 /* 3 */
+#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
+#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
+#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
+#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
+#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
+#define AU1200_SWCNT_PHYS_ADDR 0x1110010C /* 4 */
+#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
+#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
+#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
+#define AU1000_SSI0_PHYS_ADDR 0x11600000 /* 02 */
+#define AU1000_SSI1_PHYS_ADDR 0x11680000 /* 02 */
+#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
+#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
+#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */
+#define AU1550_PSC0_PHYS_ADDR 0x11A00000 /* 34 */
+#define AU1550_PSC1_PHYS_ADDR 0x11B00000 /* 34 */
+#define AU1000_MEM_PHYS_ADDR 0x14000000 /* 01234 */
+#define AU1000_STATIC_MEM_PHYS_ADDR 0x14001000 /* 01234 */
+#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
+#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
+#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
+#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
+#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
+#define AU1200_CIM_PHYS_ADDR 0x14004000 /* 4 */
+#define AU1500_PCI_PHYS_ADDR 0x14005000 /* 13 */
+#define AU1550_PE_PHYS_ADDR 0x14008000 /* 3 */
+#define AU1200_MAEBE_PHYS_ADDR 0x14010000 /* 4 */
+#define AU1200_MAEFE_PHYS_ADDR 0x14012000 /* 4 */
+#define AU1550_USB_OHCI_PHYS_ADDR 0x14020000 /* 3 */
+#define AU1200_USB_CTL_PHYS_ADDR 0x14020000 /* 4 */
+#define AU1200_USB_OTG_PHYS_ADDR 0x14020020 /* 4 */
+#define AU1200_USB_OHCI_PHYS_ADDR 0x14020100 /* 4 */
+#define AU1200_USB_EHCI_PHYS_ADDR 0x14020200 /* 4 */
+#define AU1200_USB_UDC_PHYS_ADDR 0x14022000 /* 4 */
+#define AU1100_LCD_PHYS_ADDR 0x15000000 /* 2 */
+#define AU1200_LCD_PHYS_ADDR 0x15000000 /* 4 */
+#define AU1500_PCI_MEM_PHYS_ADDR 0x400000000ULL /* 13 */
+#define AU1500_PCI_IO_PHYS_ADDR 0x500000000ULL /* 13 */
+#define AU1500_PCI_CONFIG0_PHYS_ADDR 0x600000000ULL /* 13 */
+#define AU1500_PCI_CONFIG1_PHYS_ADDR 0x680000000ULL /* 13 */
+#define AU1000_PCMCIA_IO_PHYS_ADDR 0xF00000000ULL /* 01234 */
+#define AU1000_PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL /* 01234 */
+#define AU1000_PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL /* 01234 */
+
+
+/* Au1000 SDRAM memory controller register offsets */
+#define AU1000_MEM_SDMODE0 0x0000
+#define AU1000_MEM_SDMODE1 0x0004
+#define AU1000_MEM_SDMODE2 0x0008
+#define AU1000_MEM_SDADDR0 0x000C
+#define AU1000_MEM_SDADDR1 0x0010
+#define AU1000_MEM_SDADDR2 0x0014
+#define AU1000_MEM_SDREFCFG 0x0018
+#define AU1000_MEM_SDPRECMD 0x001C
+#define AU1000_MEM_SDAUTOREF 0x0020
+#define AU1000_MEM_SDWRMD0 0x0024
+#define AU1000_MEM_SDWRMD1 0x0028
+#define AU1000_MEM_SDWRMD2 0x002C
+#define AU1000_MEM_SDSLEEP 0x0030
+#define AU1000_MEM_SDSMCKE 0x0034
+
+/* MEM_SDMODE register content definitions */
#define MEM_SDMODE_F (1 << 22)
#define MEM_SDMODE_SR (1 << 21)
#define MEM_SDMODE_BS (1 << 20)
#define MEM_SDMODE_RS (3 << 18)
#define MEM_SDMODE_CS (7 << 15)
-#define MEM_SDMODE_TRAS (15 << 11)
-#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
#define MEM_SDMODE_TWR (3 << 7)
#define MEM_SDMODE_TRP (3 << 5)
-#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TRCD (3 << 3)
#define MEM_SDMODE_TCL (7 << 0)
#define MEM_SDMODE_BS_2Bank (0 << 20)
@@ -628,173 +702,43 @@
#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
#define MEM_SDMODE_TCL_N(N) ((N) << 0)
-/*
- * MEM_SDADDR register contents definitions
- */
+/* MEM_SDADDR register contents definitions */
#define MEM_SDADDR_E (1 << 20)
-#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
#define MEM_SDADDR_CSMASK (0x03FF << 0)
#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
-/*
- * MEM_SDREFCFG register content definitions
- */
+/* MEM_SDREFCFG register content definitions */
#define MEM_SDREFCFG_TRC (15 << 28)
#define MEM_SDREFCFG_TRPM (3 << 26)
#define MEM_SDREFCFG_E (1 << 25)
-#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
#define MEM_SDREFCFG_REF_N(N) (N)
-#endif
-/***********************************************************************/
-
-/*
- * Au1550 SDRAM Register Offsets
- */
-
-/***********************************************************************/
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_SDMODE0 0x0800
-#define MEM_SDMODE1 0x0808
-#define MEM_SDMODE2 0x0810
-#define MEM_SDADDR0 0x0820
-#define MEM_SDADDR1 0x0828
-#define MEM_SDADDR2 0x0830
-#define MEM_SDCONFIGA 0x0840
-#define MEM_SDCONFIGB 0x0848
-#define MEM_SDSTAT 0x0850
-#define MEM_SDERRADDR 0x0858
-#define MEM_SDSTRIDE0 0x0860
-#define MEM_SDSTRIDE1 0x0868
-#define MEM_SDSTRIDE2 0x0870
-#define MEM_SDWRMD0 0x0880
-#define MEM_SDWRMD1 0x0888
-#define MEM_SDWRMD2 0x0890
-#define MEM_SDPRECMD 0x08C0
-#define MEM_SDAUTOREF 0x08C8
-#define MEM_SDSREF 0x08D0
-#define MEM_SDSLEEP MEM_SDSREF
-
-#endif
-
-/*
- * Physical base addresses for integrated peripherals
- * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200
- */
-
-#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */
-#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */
-#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
-#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
-#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
-#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
-#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */
-#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */
-#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */
-#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
-#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
-#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
-#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
-#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
-#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
-#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */
-#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */
-#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
-#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */
-#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */
-#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
-#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
-#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
-#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
-
-
-#ifdef CONFIG_SOC_AU1000
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
-#define IRDA_PHYS_ADDR 0x10300000
-#define SSI0_PHYS_ADDR 0x11600000
-#define SSI1_PHYS_ADDR 0x11680000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/********************************************************************/
-
-#ifdef CONFIG_SOC_AU1500
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
-#define PCI_PHYS_ADDR 0x14005000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/********************************************************************/
-
-#ifdef CONFIG_SOC_AU1100
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x10100000
-#define IRDA_PHYS_ADDR 0x10300000
-#define SSI0_PHYS_ADDR 0x11600000
-#define SSI1_PHYS_ADDR 0x11680000
-#define LCD_PHYS_ADDR 0x15000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/***********************************************************************/
-
-#ifdef CONFIG_SOC_AU1550
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define USBH_PHYS_ADDR 0x14020000
-#define PCI_PHYS_ADDR 0x14005000
-#define PE_PHYS_ADDR 0x14008000
-#define PSC0_PHYS_ADDR 0x11A00000
-#define PSC1_PHYS_ADDR 0x11B00000
-#define PSC2_PHYS_ADDR 0x10A00000
-#define PSC3_PHYS_ADDR 0x10B00000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
-
-/***********************************************************************/
-
-#ifdef CONFIG_SOC_AU1200
-#define MEM_PHYS_ADDR 0x14000000
-#define STATIC_MEM_PHYS_ADDR 0x14001000
-#define AES_PHYS_ADDR 0x10300000
-#define CIM_PHYS_ADDR 0x14004000
-#define USBM_PHYS_ADDR 0x14020000
-#define USBH_PHYS_ADDR 0x14020100
-#define PSC0_PHYS_ADDR 0x11A00000
-#define PSC1_PHYS_ADDR 0x11B00000
-#define LCD_PHYS_ADDR 0x15000000
-#define SWCNT_PHYS_ADDR 0x1110010C
-#define MAEFE_PHYS_ADDR 0x14012000
-#define MAEBE_PHYS_ADDR 0x14010000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
-#endif
+/* Au1550 SDRAM Register Offsets */
+#define AU1550_MEM_SDMODE0 0x0800
+#define AU1550_MEM_SDMODE1 0x0808
+#define AU1550_MEM_SDMODE2 0x0810
+#define AU1550_MEM_SDADDR0 0x0820
+#define AU1550_MEM_SDADDR1 0x0828
+#define AU1550_MEM_SDADDR2 0x0830
+#define AU1550_MEM_SDCONFIGA 0x0840
+#define AU1550_MEM_SDCONFIGB 0x0848
+#define AU1550_MEM_SDSTAT 0x0850
+#define AU1550_MEM_SDERRADDR 0x0858
+#define AU1550_MEM_SDSTRIDE0 0x0860
+#define AU1550_MEM_SDSTRIDE1 0x0868
+#define AU1550_MEM_SDSTRIDE2 0x0870
+#define AU1550_MEM_SDWRMD0 0x0880
+#define AU1550_MEM_SDWRMD1 0x0888
+#define AU1550_MEM_SDWRMD2 0x0890
+#define AU1550_MEM_SDPRECMD 0x08C0
+#define AU1550_MEM_SDAUTOREF 0x08C8
+#define AU1550_MEM_SDSREF 0x08D0
+#define AU1550_MEM_SDSLEEP MEM_SDSREF
/* Static Bus Controller */
#define MEM_STCFG0 0xB4001000
@@ -813,81 +757,14 @@
#define MEM_STTIME3 0xB4001034
#define MEM_STADDR3 0xB4001038
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
#define MEM_STNDCTL 0xB4001100
#define MEM_STSTAT 0xB4001104
#define MEM_STNAND_CMD 0x0
#define MEM_STNAND_ADDR 0x4
#define MEM_STNAND_DATA 0x20
-#endif
-
-
-/* Au1000 */
-#ifdef CONFIG_SOC_AU1000
-
-#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
-#define USB_HOST_CONFIG 0xB017FFFC
-#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1000 */
-
-/* Au1500 */
-#ifdef CONFIG_SOC_AU1500
-
-#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
-#define USB_HOST_CONFIG 0xB017fffc
-#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1500 */
-
-/* Au1100 */
-#ifdef CONFIG_SOC_AU1100
-
-#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
-#define USB_HOST_CONFIG 0xB017FFFC
-#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1100 */
-
-#ifdef CONFIG_SOC_AU1550
-
-#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
-#define USB_OHCI_LEN 0x00060000
-#define USB_HOST_CONFIG 0xB4027ffc
-#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
-#endif /* CONFIG_SOC_AU1550 */
-
-
-#ifdef CONFIG_SOC_AU1200
-
-#define USB_UOC_BASE 0x14020020
-#define USB_UOC_LEN 0x20
-#define USB_OHCI_BASE 0x14020100
-#define USB_OHCI_LEN 0x100
-#define USB_EHCI_BASE 0x14020200
-#define USB_EHCI_LEN 0x100
-#define USB_UDC_BASE 0x14022000
-#define USB_UDC_LEN 0x2000
-#define USB_MSR_BASE 0xB4020000
-#define USB_MSR_MCFG 4
-#define USBMSRMCFG_OMEMEN 0
-#define USBMSRMCFG_OBMEN 1
-#define USBMSRMCFG_EMEMEN 2
-#define USBMSRMCFG_EBMEN 3
-#define USBMSRMCFG_DMEMEN 4
-#define USBMSRMCFG_DBMEN 5
-#define USBMSRMCFG_GMEMEN 6
-#define USBMSRMCFG_OHCCLKEN 16
-#define USBMSRMCFG_EHCCLKEN 17
-#define USBMSRMCFG_UDCCLKEN 18
-#define USBMSRMCFG_PHYPLLEN 19
-#define USBMSRMCFG_RDCOMB 30
-#define USBMSRMCFG_PFEN 31
-
-#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT
-
-#endif /* CONFIG_SOC_AU1200 */
-
/* Programmable Counters 0 and 1 */
#define SYS_BASE 0xB1900000
#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
@@ -958,56 +835,6 @@
# define I2S_CONTROL_D (1 << 1)
# define I2S_CONTROL_CE (1 << 0)
-/* USB Host Controller */
-#ifndef USB_OHCI_LEN
-#define USB_OHCI_LEN 0x00100000
-#endif
-
-#ifndef CONFIG_SOC_AU1200
-
-/* USB Device Controller */
-#define USBD_EP0RD 0xB0200000
-#define USBD_EP0WR 0xB0200004
-#define USBD_EP2WR 0xB0200008
-#define USBD_EP3WR 0xB020000C
-#define USBD_EP4RD 0xB0200010
-#define USBD_EP5RD 0xB0200014
-#define USBD_INTEN 0xB0200018
-#define USBD_INTSTAT 0xB020001C
-# define USBDEV_INT_SOF (1 << 12)
-# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
-# define USBDEV_INT_CMPLT_BIT 0
-# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG 0xB0200020
-#define USBD_EP0CS 0xB0200024
-#define USBD_EP2CS 0xB0200028
-#define USBD_EP3CS 0xB020002C
-#define USBD_EP4CS 0xB0200030
-#define USBD_EP5CS 0xB0200034
-# define USBDEV_CS_SU (1 << 14)
-# define USBDEV_CS_NAK (1 << 13)
-# define USBDEV_CS_ACK (1 << 12)
-# define USBDEV_CS_BUSY (1 << 11)
-# define USBDEV_CS_TSIZE_BIT 1
-# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
-# define USBDEV_CS_STALL (1 << 0)
-#define USBD_EP0RDSTAT 0xB0200040
-#define USBD_EP0WRSTAT 0xB0200044
-#define USBD_EP2WRSTAT 0xB0200048
-#define USBD_EP3WRSTAT 0xB020004C
-#define USBD_EP4RDSTAT 0xB0200050
-#define USBD_EP5RDSTAT 0xB0200054
-# define USBDEV_FSTAT_FLUSH (1 << 6)
-# define USBDEV_FSTAT_UF (1 << 5)
-# define USBDEV_FSTAT_OF (1 << 4)
-# define USBDEV_FSTAT_FCNT_BIT 0
-# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE 0xB0200058
-# define USBDEV_ENABLE (1 << 1)
-# define USBDEV_CE (1 << 0)
-
-#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
@@ -1322,7 +1149,6 @@
# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
/* Au1200 only */
-#ifdef CONFIG_SOC_AU1200
#define SYS_PINFUNC_DMA (1 << 31)
#define SYS_PINFUNC_S0A (1 << 30)
#define SYS_PINFUNC_S1A (1 << 29)
@@ -1350,7 +1176,6 @@
#define SYS_PINFUNC_P0B (1 << 4)
#define SYS_PINFUNC_U0T (1 << 3)
#define SYS_PINFUNC_S1B (1 << 2)
-#endif
/* Power Management */
#define SYS_SCRATCH0 0xB1900018
@@ -1406,12 +1231,12 @@
# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
# define SYS_CS_DI2 (1 << 16)
# define SYS_CS_CI2 (1 << 15)
-#ifdef CONFIG_SOC_AU1100
+
# define SYS_CS_ML_BIT 7
# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
# define SYS_CS_DL (1 << 6)
# define SYS_CS_CL (1 << 5)
-#else
+
# define SYS_CS_MUH_BIT 12
# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
# define SYS_CS_DUH (1 << 11)
@@ -1420,7 +1245,7 @@
# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
# define SYS_CS_DUD (1 << 6)
# define SYS_CS_CUD (1 << 5)
-#endif
+
# define SYS_CS_MIR_BIT 2
# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
# define SYS_CS_DIR (1 << 1)
@@ -1467,58 +1292,30 @@
# define AC97C_RS (1 << 1)
# define AC97C_CE (1 << 0)
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
-/* Au1500 PCI Controller */
-#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
-#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
-#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
-# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \
- (1 << 25) | (1 << 26) | (1 << 27))
-#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
-#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
-#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
-#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
-#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
-#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
-#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
-#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
-#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
-#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
-#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
-#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
-#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */
-
-/*
- * All of our structures, like PCI resource, have 32-bit members.
- * Drivers are expected to do an ioremap on the PCI MEM resource, but it's
- * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch
- * to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
- * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
- * addresses. For PCI I/O, it's simpler because we get to do the ioremap
- * ourselves and then adjust the device's resources.
+/* The PCI chip selects are outside the 32bit space, and since we can't
+ * just program the 36bit addresses into BARs, we have to take a chunk
+ * out of the 32bit space and reserve it for PCI. When these addresses
+ * are ioremap()ed, they'll be fixed up to the real 36bit address before
+ * being passed to the real ioremap function.
*/
-#define Au1500_EXT_CFG 0x600000000ULL
-#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
-#define Au1500_PCI_IO_START 0x500000000ULL
-#define Au1500_PCI_IO_END 0x5000FFFFFULL
-#define Au1500_PCI_MEM_START 0x440000000ULL
-#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
+#define ALCHEMY_PCI_MEMWIN_START (AU1500_PCI_MEM_PHYS_ADDR >> 4)
+#define ALCHEMY_PCI_MEMWIN_END (ALCHEMY_PCI_MEMWIN_START + 0x0FFFFFFF)
-#define PCI_IO_START 0x00001000
-#define PCI_IO_END 0x000FFFFF
-#define PCI_MEM_START 0x40000000
-#define PCI_MEM_END 0x4FFFFFFF
+/* for PCI IO it's simpler because we get to do the ioremap ourselves and then
+ * adjust the device's resources.
+ */
+#define ALCHEMY_PCI_IOWIN_START 0x00001000
+#define ALCHEMY_PCI_IOWIN_END 0x0000FFFF
-#define PCI_FIRST_DEVFN (0 << 3)
-#define PCI_LAST_DEVFN (19 << 3)
+#ifdef CONFIG_PCI
#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
#define IOPORT_RESOURCE_END 0xffffffff
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xfffffffffULL
-#else /* Au1000 and Au1100 and Au1200 */
+#else
/* Don't allow any legacy ports probing */
#define IOPORT_RESOURCE_START 0x10000000
@@ -1526,13 +1323,77 @@
#define IOMEM_RESOURCE_START 0x10000000
#define IOMEM_RESOURCE_END 0xfffffffffULL
-#define PCI_IO_START 0
-#define PCI_IO_END 0
-#define PCI_MEM_START 0
-#define PCI_MEM_END 0
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 0
-
#endif
+/* PCI controller block register offsets */
+#define PCI_REG_CMEM 0x0000
+#define PCI_REG_CONFIG 0x0004
+#define PCI_REG_B2BMASK_CCH 0x0008
+#define PCI_REG_B2BBASE0_VID 0x000C
+#define PCI_REG_B2BBASE1_SID 0x0010
+#define PCI_REG_MWMASK_DEV 0x0014
+#define PCI_REG_MWBASE_REV_CCL 0x0018
+#define PCI_REG_ERR_ADDR 0x001C
+#define PCI_REG_SPEC_INTACK 0x0020
+#define PCI_REG_ID 0x0100
+#define PCI_REG_STATCMD 0x0104
+#define PCI_REG_CLASSREV 0x0108
+#define PCI_REG_PARAM 0x010C
+#define PCI_REG_MBAR 0x0110
+#define PCI_REG_TIMEOUT 0x0140
+
+/* PCI controller block register bits */
+#define PCI_CMEM_E (1 << 28) /* enable cacheable memory */
+#define PCI_CMEM_CMBASE(x) (((x) & 0x3fff) << 14)
+#define PCI_CMEM_CMMASK(x) ((x) & 0x3fff)
+#define PCI_CONFIG_ERD (1 << 27) /* pci error during R/W */
+#define PCI_CONFIG_ET (1 << 26) /* error in target mode */
+#define PCI_CONFIG_EF (1 << 25) /* fatal error */
+#define PCI_CONFIG_EP (1 << 24) /* parity error */
+#define PCI_CONFIG_EM (1 << 23) /* multiple errors */
+#define PCI_CONFIG_BM (1 << 22) /* bad master error */
+#define PCI_CONFIG_PD (1 << 20) /* PCI Disable */
+#define PCI_CONFIG_BME (1 << 19) /* Byte Mask Enable for reads */
+#define PCI_CONFIG_NC (1 << 16) /* mark mem access non-coherent */
+#define PCI_CONFIG_IA (1 << 15) /* INTA# enabled (target mode) */
+#define PCI_CONFIG_IP (1 << 13) /* int on PCI_PERR# */
+#define PCI_CONFIG_IS (1 << 12) /* int on PCI_SERR# */
+#define PCI_CONFIG_IMM (1 << 11) /* int on master abort */
+#define PCI_CONFIG_ITM (1 << 10) /* int on target abort (as master) */
+#define PCI_CONFIG_ITT (1 << 9) /* int on target abort (as target) */
+#define PCI_CONFIG_IPB (1 << 8) /* int on PERR# in bus master acc */
+#define PCI_CONFIG_SIC_NO (0 << 6) /* no byte mask changes */
+#define PCI_CONFIG_SIC_BA_ADR (1 << 6) /* on byte/hw acc, invert adr bits */
+#define PCI_CONFIG_SIC_HWA_DAT (2 << 6) /* on halfword acc, swap data */
+#define PCI_CONFIG_SIC_ALL (3 << 6) /* swap data bytes on all accesses */
+#define PCI_CONFIG_ST (1 << 5) /* swap data by target transactions */
+#define PCI_CONFIG_SM (1 << 4) /* swap data from PCI ctl */
+#define PCI_CONFIG_AEN (1 << 3) /* enable internal arbiter */
+#define PCI_CONFIG_R2H (1 << 2) /* REQ2# to hi-prio arbiter */
+#define PCI_CONFIG_R1H (1 << 1) /* REQ1# to hi-prio arbiter */
+#define PCI_CONFIG_CH (1 << 0) /* PCI ctl to hi-prio arbiter */
+#define PCI_B2BMASK_B2BMASK(x) (((x) & 0xffff) << 16)
+#define PCI_B2BMASK_CCH(x) ((x) & 0xffff) /* 16 upper bits of class code */
+#define PCI_B2BBASE0_VID_B0(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE0_VID_SV(x) ((x) & 0xffff)
+#define PCI_B2BBASE1_SID_B1(x) (((x) & 0xffff) << 16)
+#define PCI_B2BBASE1_SID_SI(x) ((x) & 0xffff)
+#define PCI_MWMASKDEV_MWMASK(x) (((x) & 0xffff) << 16)
+#define PCI_MWMASKDEV_DEVID(x) ((x) & 0xffff)
+#define PCI_MWBASEREVCCL_BASE(x) (((x) & 0xffff) << 16)
+#define PCI_MWBASEREVCCL_REV(x) (((x) & 0xff) << 8)
+#define PCI_MWBASEREVCCL_CCL(x) ((x) & 0xff)
+#define PCI_ID_DID(x) (((x) & 0xffff) << 16)
+#define PCI_ID_VID(x) ((x) & 0xffff)
+#define PCI_STATCMD_STATUS(x) (((x) & 0xffff) << 16)
+#define PCI_STATCMD_CMD(x) ((x) & 0xffff)
+#define PCI_CLASSREV_CLASS(x) (((x) & 0x00ffffff) << 8)
+#define PCI_CLASSREV_REV(x) ((x) & 0xff)
+#define PCI_PARAM_BIST(x) (((x) & 0xff) << 24)
+#define PCI_PARAM_HT(x) (((x) & 0xff) << 16)
+#define PCI_PARAM_LT(x) (((x) & 0xff) << 8)
+#define PCI_PARAM_CLS(x) ((x) & 0xff)
+#define PCI_TIMEOUT_RETRIES(x) (((x) & 0xff) << 8) /* max retries */
+#define PCI_TIMEOUT_TO(x) ((x) & 0xff) /* target ready timeout */
+
#endif
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx.h b/arch/mips/include/asm/mach-au1x00/au1xxx.h
deleted file mode 100644
index 1b36550..0000000
--- a/arch/mips/include/asm/mach-au1x00/au1xxx.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _AU1XXX_H_
-#define _AU1XXX_H_
-
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
- defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
-#include <asm/mach-db1x00/db1x00.h>
-
-#elif defined(CONFIG_MIPS_PB1550)
-#include <asm/mach-pb1x00/pb1550.h>
-
-#elif defined(CONFIG_MIPS_PB1200)
-#include <asm/mach-pb1x00/pb1200.h>
-
-#elif defined(CONFIG_MIPS_DB1200)
-#include <asm/mach-db1x00/db1200.h>
-
-#endif
-
-#endif /* _AU1XXX_H_ */
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 2fdacfe..323ce2d 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -126,66 +126,62 @@
#define SW_STATUS_INUSE (1 << 0)
/* Command 0 device IDs. */
-#ifdef CONFIG_SOC_AU1550
-#define DSCR_CMD0_UART0_TX 0
-#define DSCR_CMD0_UART0_RX 1
-#define DSCR_CMD0_UART3_TX 2
-#define DSCR_CMD0_UART3_RX 3
-#define DSCR_CMD0_DMA_REQ0 4
-#define DSCR_CMD0_DMA_REQ1 5
-#define DSCR_CMD0_DMA_REQ2 6
-#define DSCR_CMD0_DMA_REQ3 7
-#define DSCR_CMD0_USBDEV_RX0 8
-#define DSCR_CMD0_USBDEV_TX0 9
-#define DSCR_CMD0_USBDEV_TX1 10
-#define DSCR_CMD0_USBDEV_TX2 11
-#define DSCR_CMD0_USBDEV_RX3 12
-#define DSCR_CMD0_USBDEV_RX4 13
-#define DSCR_CMD0_PSC0_TX 14
-#define DSCR_CMD0_PSC0_RX 15
-#define DSCR_CMD0_PSC1_TX 16
-#define DSCR_CMD0_PSC1_RX 17
-#define DSCR_CMD0_PSC2_TX 18
-#define DSCR_CMD0_PSC2_RX 19
-#define DSCR_CMD0_PSC3_TX 20
-#define DSCR_CMD0_PSC3_RX 21
-#define DSCR_CMD0_PCI_WRITE 22
-#define DSCR_CMD0_NAND_FLASH 23
-#define DSCR_CMD0_MAC0_RX 24
-#define DSCR_CMD0_MAC0_TX 25
-#define DSCR_CMD0_MAC1_RX 26
-#define DSCR_CMD0_MAC1_TX 27
-#endif /* CONFIG_SOC_AU1550 */
+#define AU1550_DSCR_CMD0_UART0_TX 0
+#define AU1550_DSCR_CMD0_UART0_RX 1
+#define AU1550_DSCR_CMD0_UART3_TX 2
+#define AU1550_DSCR_CMD0_UART3_RX 3
+#define AU1550_DSCR_CMD0_DMA_REQ0 4
+#define AU1550_DSCR_CMD0_DMA_REQ1 5
+#define AU1550_DSCR_CMD0_DMA_REQ2 6
+#define AU1550_DSCR_CMD0_DMA_REQ3 7
+#define AU1550_DSCR_CMD0_USBDEV_RX0 8
+#define AU1550_DSCR_CMD0_USBDEV_TX0 9
+#define AU1550_DSCR_CMD0_USBDEV_TX1 10
+#define AU1550_DSCR_CMD0_USBDEV_TX2 11
+#define AU1550_DSCR_CMD0_USBDEV_RX3 12
+#define AU1550_DSCR_CMD0_USBDEV_RX4 13
+#define AU1550_DSCR_CMD0_PSC0_TX 14
+#define AU1550_DSCR_CMD0_PSC0_RX 15
+#define AU1550_DSCR_CMD0_PSC1_TX 16
+#define AU1550_DSCR_CMD0_PSC1_RX 17
+#define AU1550_DSCR_CMD0_PSC2_TX 18
+#define AU1550_DSCR_CMD0_PSC2_RX 19
+#define AU1550_DSCR_CMD0_PSC3_TX 20
+#define AU1550_DSCR_CMD0_PSC3_RX 21
+#define AU1550_DSCR_CMD0_PCI_WRITE 22
+#define AU1550_DSCR_CMD0_NAND_FLASH 23
+#define AU1550_DSCR_CMD0_MAC0_RX 24
+#define AU1550_DSCR_CMD0_MAC0_TX 25
+#define AU1550_DSCR_CMD0_MAC1_RX 26
+#define AU1550_DSCR_CMD0_MAC1_TX 27
-#ifdef CONFIG_SOC_AU1200
-#define DSCR_CMD0_UART0_TX 0
-#define DSCR_CMD0_UART0_RX 1
-#define DSCR_CMD0_UART1_TX 2
-#define DSCR_CMD0_UART1_RX 3
-#define DSCR_CMD0_DMA_REQ0 4
-#define DSCR_CMD0_DMA_REQ1 5
-#define DSCR_CMD0_MAE_BE 6
-#define DSCR_CMD0_MAE_FE 7
-#define DSCR_CMD0_SDMS_TX0 8
-#define DSCR_CMD0_SDMS_RX0 9
-#define DSCR_CMD0_SDMS_TX1 10
-#define DSCR_CMD0_SDMS_RX1 11
-#define DSCR_CMD0_AES_TX 13
-#define DSCR_CMD0_AES_RX 12
-#define DSCR_CMD0_PSC0_TX 14
-#define DSCR_CMD0_PSC0_RX 15
-#define DSCR_CMD0_PSC1_TX 16
-#define DSCR_CMD0_PSC1_RX 17
-#define DSCR_CMD0_CIM_RXA 18
-#define DSCR_CMD0_CIM_RXB 19
-#define DSCR_CMD0_CIM_RXC 20
-#define DSCR_CMD0_MAE_BOTH 21
-#define DSCR_CMD0_LCD 22
-#define DSCR_CMD0_NAND_FLASH 23
-#define DSCR_CMD0_PSC0_SYNC 24
-#define DSCR_CMD0_PSC1_SYNC 25
-#define DSCR_CMD0_CIM_SYNC 26
-#endif /* CONFIG_SOC_AU1200 */
+#define AU1200_DSCR_CMD0_UART0_TX 0
+#define AU1200_DSCR_CMD0_UART0_RX 1
+#define AU1200_DSCR_CMD0_UART1_TX 2
+#define AU1200_DSCR_CMD0_UART1_RX 3
+#define AU1200_DSCR_CMD0_DMA_REQ0 4
+#define AU1200_DSCR_CMD0_DMA_REQ1 5
+#define AU1200_DSCR_CMD0_MAE_BE 6
+#define AU1200_DSCR_CMD0_MAE_FE 7
+#define AU1200_DSCR_CMD0_SDMS_TX0 8
+#define AU1200_DSCR_CMD0_SDMS_RX0 9
+#define AU1200_DSCR_CMD0_SDMS_TX1 10
+#define AU1200_DSCR_CMD0_SDMS_RX1 11
+#define AU1200_DSCR_CMD0_AES_TX 13
+#define AU1200_DSCR_CMD0_AES_RX 12
+#define AU1200_DSCR_CMD0_PSC0_TX 14
+#define AU1200_DSCR_CMD0_PSC0_RX 15
+#define AU1200_DSCR_CMD0_PSC1_TX 16
+#define AU1200_DSCR_CMD0_PSC1_RX 17
+#define AU1200_DSCR_CMD0_CIM_RXA 18
+#define AU1200_DSCR_CMD0_CIM_RXB 19
+#define AU1200_DSCR_CMD0_CIM_RXC 20
+#define AU1200_DSCR_CMD0_MAE_BOTH 21
+#define AU1200_DSCR_CMD0_LCD 22
+#define AU1200_DSCR_CMD0_NAND_FLASH 23
+#define AU1200_DSCR_CMD0_PSC0_SYNC 24
+#define AU1200_DSCR_CMD0_PSC1_SYNC 25
+#define AU1200_DSCR_CMD0_CIM_SYNC 26
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index 5656c72..e306384 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -58,6 +58,7 @@
#endif
int irq;
u32 regbase;
+ int ddma_id;
} _auide_hwif;
/******************************************************************************/
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
index 892b7f1..4e3f3bc 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_psc.h
@@ -33,19 +33,6 @@
#ifndef _AU1000_PSC_H_
#define _AU1000_PSC_H_
-/* The PSC base addresses. */
-#ifdef CONFIG_SOC_AU1550
-#define PSC0_BASE_ADDR 0xb1a00000
-#define PSC1_BASE_ADDR 0xb1b00000
-#define PSC2_BASE_ADDR 0xb0a00000
-#define PSC3_BASE_ADDR 0xb0b00000
-#endif
-
-#ifdef CONFIG_SOC_AU1200
-#define PSC0_BASE_ADDR 0xb1a00000
-#define PSC1_BASE_ADDR 0xb1b00000
-#endif
-
/*
* The PSC select and control registers are common to all protocols.
*/
@@ -80,19 +67,6 @@
#define PSC_AC97GPO_OFFSET 0x00000028
#define PSC_AC97GPI_OFFSET 0x0000002c
-#define AC97_PSC_SEL (AC97_PSC_BASE + PSC_SEL_OFFSET)
-#define AC97_PSC_CTRL (AC97_PSC_BASE + PSC_CTRL_OFFSET)
-#define PSC_AC97CFG (AC97_PSC_BASE + PSC_AC97CFG_OFFSET)
-#define PSC_AC97MSK (AC97_PSC_BASE + PSC_AC97MSK_OFFSET)
-#define PSC_AC97PCR (AC97_PSC_BASE + PSC_AC97PCR_OFFSET)
-#define PSC_AC97STAT (AC97_PSC_BASE + PSC_AC97STAT_OFFSET)
-#define PSC_AC97EVNT (AC97_PSC_BASE + PSC_AC97EVNT_OFFSET)
-#define PSC_AC97TXRX (AC97_PSC_BASE + PSC_AC97TXRX_OFFSET)
-#define PSC_AC97CDC (AC97_PSC_BASE + PSC_AC97CDC_OFFSET)
-#define PSC_AC97RST (AC97_PSC_BASE + PSC_AC97RST_OFFSET)
-#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
-#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
-
/* AC97 Config Register. */
#define PSC_AC97CFG_RT_MASK (3 << 30)
#define PSC_AC97CFG_RT_FIFO1 (0 << 30)
@@ -394,19 +368,6 @@
#define PSC_SPITXRX_LC (1 << 29)
#define PSC_SPITXRX_SR (1 << 28)
-/* PSC in SMBus (I2C) Mode. */
-typedef struct psc_smb {
- u32 psc_sel;
- u32 psc_ctrl;
- u32 psc_smbcfg;
- u32 psc_smbmsk;
- u32 psc_smbpcr;
- u32 psc_smbstat;
- u32 psc_smbevnt;
- u32 psc_smbtxrx;
- u32 psc_smbtmr;
-} psc_smb_t;
-
/* SMBus Config Register. */
#define PSC_SMBCFG_RT_MASK (3 << 30)
#define PSC_SMBCFG_RT_FIFO1 (0 << 30)
diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
index 1f41a52..73853b5 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h
@@ -347,17 +347,6 @@
/**********************************************************************/
-/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once. On Au1550/Au1200 this
- * register enables use of GPIOs as wake source.
- */
-static inline void alchemy_gpio1_input_enable(void)
-{
- void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
- __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */
- wmb();
-}
-
/* GPIO2 shared interrupts and control */
static inline void __alchemy_gpio2_mod_int(int gpio2, int en)
@@ -561,6 +550,7 @@
#ifndef CONFIG_GPIOLIB
+#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (4) */
@@ -665,24 +655,7 @@
#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-#else /* CONFIG GPIOLIB */
-
-
- /* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
-
-/* get everything through gpiolib */
-#define gpio_to_irq __gpio_to_irq
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define irq_to_gpio alchemy_irq_to_gpio
-
-#include <asm-generic/gpio.h>
-
-#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
+#endif /* CONFIG_ALCHEMY_GPIOINT_AU1000 */
#endif /* !CONFIG_GPIOLIB */
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h
index c3f60cd..fcdc8c4 100644
--- a/arch/mips/include/asm/mach-au1x00/gpio.h
+++ b/arch/mips/include/asm/mach-au1x00/gpio.h
@@ -1,10 +1,83 @@
+/*
+ * Alchemy GPIO support.
+ *
+ * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
+ * the same kernel image.
+ * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
+ * appropriate CPU type (AU1000 currently).
+ */
+
#ifndef _ALCHEMY_GPIO_H_
#define _ALCHEMY_GPIO_H_
-#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000)
-
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/gpio-au1000.h>
-#endif
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+ __raw_writel(0, base + 0x110); /* the write op is key */
+ wmb();
+}
+
+
+/* Linux gpio framework integration.
+*
+* 4 use cases of Alchemy GPIOS:
+*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
+* Board must register gpiochips.
+*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
+* A gpiochip for the 75 GPIOs is registered.
+*
+*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
+* the boards' gpio.h must provide the linux gpio wrapper functions,
+*
+*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
+* inlinable gpio functions are provided which enable access to the
+* Au1300 gpios only by using the numbers straight out of the data-
+* sheets.
+
+* Cases 1 and 3 are intended for boards which want to provide their own
+* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
+* which are in part provided by spare Au1300 GPIO pins and in part by
+* an external FPGA but you still want them to be accssible in linux
+* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
+* as required).
+*/
+
+#ifdef CONFIG_GPIOLIB
+
+/* wraps the cpu-dependent irq_to_gpio functions */
+/* FIXME: gpiolib needs an irq_to_gpio hook */
+static inline int __au_irq_to_gpio(unsigned int irq)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
+ return alchemy_irq_to_gpio(irq);
+ }
+ return -EINVAL;
+}
+
+
+/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
+#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */
+
+/* get everything through gpiolib */
+#define gpio_to_irq __gpio_to_irq
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define irq_to_gpio __au_irq_to_gpio
+
+#include <asm-generic/gpio.h>
+
+#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */
+
+
+#endif /* CONFIG_GPIOLIB */
#endif /* _ALCHEMY_GPIO_H_ */
diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h
index 3404248..7a39657 100644
--- a/arch/mips/include/asm/mach-db1x00/db1200.h
+++ b/arch/mips/include/asm/mach-db1x00/db1200.h
@@ -46,8 +46,6 @@
#define IDE_PHYS_ADDR 0x18800000
#define IDE_REG_SHIFT 5
-#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE 128
#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR
#define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h
index a919dac..a5affb0 100644
--- a/arch/mips/include/asm/mach-db1x00/db1x00.h
+++ b/arch/mips/include/asm/mach-db1x00/db1x00.h
@@ -31,15 +31,15 @@
#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR
#define NAND_PHYS_ADDR 0x20000000
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h
index fce4332..374416a 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1200.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h
@@ -28,23 +28,23 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_AC97_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN AU1200_DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN AU1200_DSCR_CMD0_PSC1_RX
/*
* SPI and SMB are muxed on the Pb1200 board.
* Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR
+#define SMBUS_PSC_BASE AU1550_PSC0_PHYS_ADDR
/*
* AC97 and I2S are muxed on the Pb1200 board.
* Refer to board documentation.
*/
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define I2S_PSC_BASE PSC1_BASE_ADDR
+#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR
+#define I2S_PSC_BASE AU1550_PSC1_PHYS_ADDR
#define BCSR_SYSTEM_VDDI 0x001F
@@ -76,8 +76,6 @@
#define IDE_REG_SHIFT 5
#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT)
#define IDE_INT PB1200_IDE_INT
-#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
-#define IDE_RQSIZE 128
#define NAND_PHYS_ADDR 0x1C000000
diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h
index f835c88..443b88a 100644
--- a/arch/mips/include/asm/mach-pb1x00/pb1550.h
+++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h
@@ -30,15 +30,15 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN AU1550_DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN AU1550_DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN AU1550_DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN AU1550_DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE AU1550_PSC0_PHYS_ADDR
+#define AC97_PSC_BASE AU1550_PSC1_PHYS_ADDR
+#define SMBUS_PSC_BASE AU1550_PSC2_PHYS_ADDR
+#define I2S_PSC_BASE AU1550_PSC3_PHYS_ADDR
/*
* Timing values as described in databook, * ns value stripped of
diff --git a/arch/mips/include/asm/mipsprom.h b/arch/mips/include/asm/mipsprom.h
index 146d41b..e93943f 100644
--- a/arch/mips/include/asm/mipsprom.h
+++ b/arch/mips/include/asm/mipsprom.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_MIPSPROM_H
+#define __ASM_MIPSPROM_H
#define PROM_RESET 0
#define PROM_EXEC 1
@@ -73,4 +73,4 @@
extern char *prom_getenv(char *);
-#endif /* __ASM_MIPS_PROM_H */
+#endif /* __ASM_MIPSPROM_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 6a6f8a8..2ea7b81 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1006,18 +1006,26 @@
#define write_c0_perfctrl0(val) __write_32bit_c0_register($25, 0, val)
#define read_c0_perfcntr0() __read_32bit_c0_register($25, 1)
#define write_c0_perfcntr0(val) __write_32bit_c0_register($25, 1, val)
+#define read_c0_perfcntr0_64() __read_64bit_c0_register($25, 1)
+#define write_c0_perfcntr0_64(val) __write_64bit_c0_register($25, 1, val)
#define read_c0_perfctrl1() __read_32bit_c0_register($25, 2)
#define write_c0_perfctrl1(val) __write_32bit_c0_register($25, 2, val)
#define read_c0_perfcntr1() __read_32bit_c0_register($25, 3)
#define write_c0_perfcntr1(val) __write_32bit_c0_register($25, 3, val)
+#define read_c0_perfcntr1_64() __read_64bit_c0_register($25, 3)
+#define write_c0_perfcntr1_64(val) __write_64bit_c0_register($25, 3, val)
#define read_c0_perfctrl2() __read_32bit_c0_register($25, 4)
#define write_c0_perfctrl2(val) __write_32bit_c0_register($25, 4, val)
#define read_c0_perfcntr2() __read_32bit_c0_register($25, 5)
#define write_c0_perfcntr2(val) __write_32bit_c0_register($25, 5, val)
+#define read_c0_perfcntr2_64() __read_64bit_c0_register($25, 5)
+#define write_c0_perfcntr2_64(val) __write_64bit_c0_register($25, 5, val)
#define read_c0_perfctrl3() __read_32bit_c0_register($25, 6)
#define write_c0_perfctrl3(val) __write_32bit_c0_register($25, 6, val)
#define read_c0_perfcntr3() __read_32bit_c0_register($25, 7)
#define write_c0_perfcntr3(val) __write_32bit_c0_register($25, 7, val)
+#define read_c0_perfcntr3_64() __read_64bit_c0_register($25, 7)
+#define write_c0_perfcntr3_64(val) __write_64bit_c0_register($25, 7, val)
/* RM9000 PerfCount performance counter register */
#define read_c0_perfcount() __read_64bit_c0_register($25, 0)
diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h
index 857d9b7..7a6e82e 100644
--- a/arch/mips/include/asm/prom.h
+++ b/arch/mips/include/asm/prom.h
@@ -8,8 +8,8 @@
* published by the Free Software Foundation.
*
*/
-#ifndef __ASM_MIPS_PROM_H
-#define __ASM_MIPS_PROM_H
+#ifndef __ASM_PROM_H
+#define __ASM_PROM_H
#ifdef CONFIG_OF
#include <asm/bootinfo.h>
@@ -25,4 +25,4 @@
static inline void device_tree_init(void) { }
#endif /* CONFIG_OF */
-#endif /* _ASM_MIPS_PROM_H */
+#endif /* __ASM_PROM_H */
diff --git a/arch/mips/include/asm/regdef.h b/arch/mips/include/asm/regdef.h
index 7c8ecb6..785a518 100644
--- a/arch/mips/include/asm/regdef.h
+++ b/arch/mips/include/asm/regdef.h
@@ -6,6 +6,8 @@
* Copyright (C) 1985 MIPS Computer Systems, Inc.
* Copyright (C) 1994, 95, 99, 2003 by Ralf Baechle
* Copyright (C) 1990 - 1992, 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2011 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
*/
#ifndef _ASM_REGDEF_H
#define _ASM_REGDEF_H
@@ -30,9 +32,13 @@
#define t2 $10
#define t3 $11
#define t4 $12
+#define ta0 $12
#define t5 $13
+#define ta1 $13
#define t6 $14
+#define ta2 $14
#define t7 $15
+#define ta3 $15
#define s0 $16 /* callee saved */
#define s1 $17
#define s2 $18
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 4397972..e1ddb95 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -17,8 +17,6 @@
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -30,6 +28,8 @@
#include <asm/mach-jz4740/base.h>
+#include "irq.h"
+
#define JZ4740_GPIO_BASE_A (32*0)
#define JZ4740_GPIO_BASE_B (32*1)
#define JZ4740_GPIO_BASE_C (32*2)
@@ -77,14 +77,10 @@
struct jz_gpio_chip {
unsigned int irq;
unsigned int irq_base;
- uint32_t wakeup;
- uint32_t suspend_mask;
uint32_t edge_trigger_both;
void __iomem *base;
- spinlock_t lock;
-
struct gpio_chip gpio_chip;
};
@@ -102,7 +98,8 @@
static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data)
{
- return irq_data_get_irq_chip_data(data);
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ return gc->private;
}
static inline void jz_gpio_write_bit(unsigned int gpio, unsigned int reg)
@@ -304,21 +301,15 @@
{
uint32_t flag;
unsigned int gpio_irq;
- unsigned int gpio_bank;
struct jz_gpio_chip *chip = irq_desc_get_handler_data(desc);
- gpio_bank = JZ4740_IRQ_GPIO0 - irq;
-
flag = readl(chip->base + JZ_REG_GPIO_FLAG);
-
if (!flag)
return;
- gpio_irq = __fls(flag);
+ gpio_irq = chip->irq_base + __fls(flag);
- jz_gpio_check_trigger_both(chip, irq);
-
- gpio_irq += (gpio_bank << 5) + JZ4740_IRQ_GPIO(0);
+ jz_gpio_check_trigger_both(chip, gpio_irq);
generic_handle_irq(gpio_irq);
};
@@ -329,18 +320,12 @@
writel(IRQ_TO_BIT(data->irq), chip->base + reg);
}
-static void jz_gpio_irq_mask(struct irq_data *data)
-{
- jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_SET);
-};
-
static void jz_gpio_irq_unmask(struct irq_data *data)
{
struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
jz_gpio_check_trigger_both(chip, data->irq);
-
- jz_gpio_set_irq_bit(data, JZ_REG_GPIO_MASK_CLEAR);
+ irq_gc_unmask_enable_reg(data);
};
/* TODO: Check if function is gpio */
@@ -353,18 +338,13 @@
static void jz_gpio_irq_shutdown(struct irq_data *data)
{
- jz_gpio_irq_mask(data);
+ irq_gc_mask_disable_reg(data);
/* Set direction to input */
jz_gpio_set_irq_bit(data, JZ_REG_GPIO_DIRECTION_CLEAR);
jz_gpio_set_irq_bit(data, JZ_REG_GPIO_SELECT_CLEAR);
}
-static void jz_gpio_irq_ack(struct irq_data *data)
-{
- jz_gpio_set_irq_bit(data, JZ_REG_GPIO_FLAG_CLEAR);
-};
-
static int jz_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
{
struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
@@ -408,35 +388,13 @@
static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
{
struct jz_gpio_chip *chip = irq_to_jz_gpio_chip(data);
- spin_lock(&chip->lock);
- if (on)
- chip->wakeup |= IRQ_TO_BIT(data->irq);
- else
- chip->wakeup &= ~IRQ_TO_BIT(data->irq);
- spin_unlock(&chip->lock);
+ irq_gc_set_wake(data, on);
irq_set_irq_wake(chip->irq, on);
+
return 0;
}
-static struct irq_chip jz_gpio_irq_chip = {
- .name = "GPIO",
- .irq_mask = jz_gpio_irq_mask,
- .irq_unmask = jz_gpio_irq_unmask,
- .irq_ack = jz_gpio_irq_ack,
- .irq_startup = jz_gpio_irq_startup,
- .irq_shutdown = jz_gpio_irq_shutdown,
- .irq_set_type = jz_gpio_irq_set_type,
- .irq_set_wake = jz_gpio_irq_set_wake,
- .flags = IRQCHIP_SET_TYPE_MASKED,
-};
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
#define JZ4740_GPIO_CHIP(_bank) { \
.irq_base = JZ4740_IRQ_GPIO_BASE_ ## _bank, \
.gpio_chip = { \
@@ -458,64 +416,44 @@
JZ4740_GPIO_CHIP(D),
};
-static void jz4740_gpio_suspend_chip(struct jz_gpio_chip *chip)
-{
- chip->suspend_mask = readl(chip->base + JZ_REG_GPIO_MASK);
- writel(~(chip->wakeup), chip->base + JZ_REG_GPIO_MASK_SET);
- writel(chip->wakeup, chip->base + JZ_REG_GPIO_MASK_CLEAR);
-}
-
-static int jz4740_gpio_suspend(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); i++)
- jz4740_gpio_suspend_chip(&jz4740_gpio_chips[i]);
-
- return 0;
-}
-
-static void jz4740_gpio_resume_chip(struct jz_gpio_chip *chip)
-{
- uint32_t mask = chip->suspend_mask;
-
- writel(~mask, chip->base + JZ_REG_GPIO_MASK_CLEAR);
- writel(mask, chip->base + JZ_REG_GPIO_MASK_SET);
-}
-
-static void jz4740_gpio_resume(void)
-{
- int i;
-
- for (i = ARRAY_SIZE(jz4740_gpio_chips) - 1; i >= 0 ; i--)
- jz4740_gpio_resume_chip(&jz4740_gpio_chips[i]);
-}
-
-static struct syscore_ops jz4740_gpio_syscore_ops = {
- .suspend = jz4740_gpio_suspend,
- .resume = jz4740_gpio_resume,
-};
-
static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
{
- int irq;
-
- spin_lock_init(&chip->lock);
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
chip->base = ioremap(JZ4740_GPIO_BASE_ADDR + (id * 0x100), 0x100);
- gpiochip_add(&chip->gpio_chip);
-
chip->irq = JZ4740_IRQ_INTC_GPIO(id);
irq_set_handler_data(chip->irq, chip);
irq_set_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
- for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; ++irq) {
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_data(irq, chip);
- irq_set_chip_and_handler(irq, &jz_gpio_irq_chip,
- handle_level_irq);
- }
+ gc = irq_alloc_generic_chip(chip->gpio_chip.label, 1, chip->irq_base,
+ chip->base, handle_level_irq);
+
+ gc->wake_enabled = IRQ_MSK(chip->gpio_chip.ngpio);
+ gc->private = chip;
+
+ ct = gc->chip_types;
+ ct->regs.enable = JZ_REG_GPIO_MASK_CLEAR;
+ ct->regs.disable = JZ_REG_GPIO_MASK_SET;
+ ct->regs.ack = JZ_REG_GPIO_FLAG_CLEAR;
+
+ ct->chip.name = "GPIO";
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_unmask = jz_gpio_irq_unmask;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_suspend = jz4740_irq_suspend;
+ ct->chip.irq_resume = jz4740_irq_resume;
+ ct->chip.irq_startup = jz_gpio_irq_startup;
+ ct->chip.irq_shutdown = jz_gpio_irq_shutdown;
+ ct->chip.irq_set_type = jz_gpio_irq_set_type;
+ ct->chip.irq_set_wake = jz_gpio_irq_set_wake;
+ ct->chip.flags = IRQCHIP_SET_TYPE_MASKED;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio),
+ IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL);
+
+ gpiochip_add(&chip->gpio_chip);
}
static int __init jz4740_gpio_init(void)
@@ -525,8 +463,6 @@
for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
- register_syscore_ops(&jz4740_gpio_syscore_ops);
-
printk(KERN_INFO "JZ4740 GPIO initialized\n");
return 0;
diff --git a/arch/mips/jz4740/irq.c b/arch/mips/jz4740/irq.c
index d82c0c4..fc57ded 100644
--- a/arch/mips/jz4740/irq.c
+++ b/arch/mips/jz4740/irq.c
@@ -32,8 +32,6 @@
#include <asm/mach-jz4740/base.h>
static void __iomem *jz_intc_base;
-static uint32_t jz_intc_wakeup;
-static uint32_t jz_intc_saved;
#define JZ_REG_INTC_STATUS 0x00
#define JZ_REG_INTC_MASK 0x04
@@ -41,41 +39,6 @@
#define JZ_REG_INTC_CLEAR_MASK 0x0c
#define JZ_REG_INTC_PENDING 0x10
-#define IRQ_BIT(x) BIT((x) - JZ4740_IRQ_BASE)
-
-static inline unsigned long intc_irq_bit(struct irq_data *data)
-{
- return (unsigned long)irq_data_get_irq_chip_data(data);
-}
-
-static void intc_irq_unmask(struct irq_data *data)
-{
- writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-static void intc_irq_mask(struct irq_data *data)
-{
- writel(intc_irq_bit(data), jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
-static int intc_irq_set_wake(struct irq_data *data, unsigned int on)
-{
- if (on)
- jz_intc_wakeup |= intc_irq_bit(data);
- else
- jz_intc_wakeup &= ~intc_irq_bit(data);
-
- return 0;
-}
-
-static struct irq_chip intc_irq_type = {
- .name = "INTC",
- .irq_mask = intc_irq_mask,
- .irq_mask_ack = intc_irq_mask,
- .irq_unmask = intc_irq_unmask,
- .irq_set_wake = intc_irq_set_wake,
-};
-
static irqreturn_t jz4740_cascade(int irq, void *data)
{
uint32_t irq_reg;
@@ -88,6 +51,26 @@
return IRQ_HANDLED;
}
+static void jz4740_irq_set_mask(struct irq_chip_generic *gc, uint32_t mask)
+{
+ struct irq_chip_regs *regs = &gc->chip_types->regs;
+
+ writel(mask, gc->reg_base + regs->enable);
+ writel(~mask, gc->reg_base + regs->disable);
+}
+
+void jz4740_irq_suspend(struct irq_data *data)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ jz4740_irq_set_mask(gc, gc->wake_active);
+}
+
+void jz4740_irq_resume(struct irq_data *data)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
+ jz4740_irq_set_mask(gc, gc->mask_cache);
+}
+
static struct irqaction jz4740_cascade_action = {
.handler = jz4740_cascade,
.name = "JZ4740 cascade interrupt",
@@ -95,7 +78,9 @@
void __init arch_init_irq(void)
{
- int i;
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
mips_cpu_irq_init();
jz_intc_base = ioremap(JZ4740_INTC_BASE_ADDR, 0x14);
@@ -103,10 +88,22 @@
/* Mask all irqs */
writel(0xffffffff, jz_intc_base + JZ_REG_INTC_SET_MASK);
- for (i = JZ4740_IRQ_BASE; i < JZ4740_IRQ_BASE + 32; i++) {
- irq_set_chip_data(i, (void *)IRQ_BIT(i));
- irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq);
- }
+ gc = irq_alloc_generic_chip("INTC", 1, JZ4740_IRQ_BASE, jz_intc_base,
+ handle_level_irq);
+
+ gc->wake_enabled = IRQ_MSK(32);
+
+ ct = gc->chip_types;
+ ct->regs.enable = JZ_REG_INTC_CLEAR_MASK;
+ ct->regs.disable = JZ_REG_INTC_SET_MASK;
+ ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.irq_mask = irq_gc_mask_disable_reg;
+ ct->chip.irq_mask_ack = irq_gc_mask_disable_reg;
+ ct->chip.irq_set_wake = irq_gc_set_wake;
+ ct->chip.irq_suspend = jz4740_irq_suspend;
+ ct->chip.irq_resume = jz4740_irq_resume;
+
+ irq_setup_generic_chip(gc, IRQ_MSK(32), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
setup_irq(2, &jz4740_cascade_action);
}
@@ -122,19 +119,6 @@
spurious_interrupt();
}
-void jz4740_intc_suspend(void)
-{
- jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK);
- writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK);
- writel(jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
-}
-
-void jz4740_intc_resume(void)
-{
- writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
- writel(jz_intc_saved, jz_intc_base + JZ_REG_INTC_SET_MASK);
-}
-
#ifdef CONFIG_DEBUG_FS
static inline void intc_seq_reg(struct seq_file *s, const char *name,
diff --git a/arch/mips/jz4740/irq.h b/arch/mips/jz4740/irq.h
index 56b5ead..f75e39d 100644
--- a/arch/mips/jz4740/irq.h
+++ b/arch/mips/jz4740/irq.h
@@ -15,7 +15,9 @@
#ifndef __MIPS_JZ4740_IRQ_H__
#define __MIPS_JZ4740_IRQ_H__
-extern void jz4740_intc_suspend(void);
-extern void jz4740_intc_resume(void);
+#include <linux/irq.h>
+
+extern void jz4740_irq_suspend(struct irq_data *data);
+extern void jz4740_irq_resume(struct irq_data *data);
#endif
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
index 902d5b5..6744fa7 100644
--- a/arch/mips/jz4740/pm.c
+++ b/arch/mips/jz4740/pm.c
@@ -21,11 +21,9 @@
#include <asm/mach-jz4740/clock.h>
#include "clock.h"
-#include "irq.h"
static int jz4740_pm_enter(suspend_state_t state)
{
- jz4740_intc_suspend();
jz4740_clock_suspend();
jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_SLEEP);
@@ -37,7 +35,6 @@
jz4740_clock_set_wait_mode(JZ4740_WAIT_MODE_IDLE);
jz4740_clock_resume();
- jz4740_intc_resume();
return 0;
}
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 83bba33..1a96618 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -11,6 +11,8 @@
ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_early_printk.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
+CFLAGS_REMOVE_perf_event_mipsxx.o = -pg
endif
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
@@ -106,7 +108,8 @@
obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/
-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index ebc0cd2..aa327a7 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -978,7 +978,10 @@
platform:
set_elf_platform(cpu, "octeon");
break;
+ case PRID_IMP_CAVIUM_CN61XX:
case PRID_IMP_CAVIUM_CN63XX:
+ case PRID_IMP_CAVIUM_CN66XX:
+ case PRID_IMP_CAVIUM_CN68XX:
c->cputype = CPU_CAVIUM_OCTEON2;
__cpu_name[cpu] = "Cavium Octeon II";
set_elf_platform(cpu, "octeon2");
diff --git a/arch/mips/kernel/perf_event.c b/arch/mips/kernel/perf_event.c
index 0aee944..c1cf9c6 100644
--- a/arch/mips/kernel/perf_event.c
+++ b/arch/mips/kernel/perf_event.c
@@ -14,533 +14,16 @@
* published by the Free Software Foundation.
*/
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
#include <linux/perf_event.h>
-#include <linux/uaccess.h>
-#include <asm/irq.h>
-#include <asm/irq_regs.h>
#include <asm/stacktrace.h>
-#include <asm/time.h> /* For perf_irq */
-
-/* These are for 32bit counters. For 64bit ones, define them accordingly. */
-#define MAX_PERIOD ((1ULL << 32) - 1)
-#define VALID_COUNT 0x7fffffff
-#define TOTAL_BITS 32
-#define HIGHEST_BIT 31
-
-#define MIPS_MAX_HWEVENTS 4
-
-struct cpu_hw_events {
- /* Array of events on this cpu. */
- struct perf_event *events[MIPS_MAX_HWEVENTS];
-
- /*
- * Set the bit (indexed by the counter number) when the counter
- * is used for an event.
- */
- unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
-
- /*
- * The borrowed MSB for the performance counter. A MIPS performance
- * counter uses its bit 31 (for 32bit counters) or bit 63 (for 64bit
- * counters) as a factor of determining whether a counter overflow
- * should be signaled. So here we use a separate MSB for each
- * counter to make things easy.
- */
- unsigned long msbs[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
-
- /*
- * Software copy of the control register for each performance counter.
- * MIPS CPUs vary in performance counters. They use this differently,
- * and even may not use it.
- */
- unsigned int saved_ctrl[MIPS_MAX_HWEVENTS];
-};
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
- .saved_ctrl = {0},
-};
-
-/* The description of MIPS performance events. */
-struct mips_perf_event {
- unsigned int event_id;
- /*
- * MIPS performance counters are indexed starting from 0.
- * CNTR_EVEN indicates the indexes of the counters to be used are
- * even numbers.
- */
- unsigned int cntr_mask;
- #define CNTR_EVEN 0x55555555
- #define CNTR_ODD 0xaaaaaaaa
-#ifdef CONFIG_MIPS_MT_SMP
- enum {
- T = 0,
- V = 1,
- P = 2,
- } range;
-#else
- #define T
- #define V
- #define P
-#endif
-};
-
-static struct mips_perf_event raw_event;
-static DEFINE_MUTEX(raw_event_mutex);
-
-#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff
-#define C(x) PERF_COUNT_HW_CACHE_##x
-
-struct mips_pmu {
- const char *name;
- int irq;
- irqreturn_t (*handle_irq)(int irq, void *dev);
- int (*handle_shared_irq)(void);
- void (*start)(void);
- void (*stop)(void);
- int (*alloc_counter)(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc);
- u64 (*read_counter)(unsigned int idx);
- void (*write_counter)(unsigned int idx, u64 val);
- void (*enable_event)(struct hw_perf_event *evt, int idx);
- void (*disable_event)(int idx);
- const struct mips_perf_event *(*map_raw_event)(u64 config);
- const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
- const struct mips_perf_event (*cache_event_map)
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
- unsigned int num_counters;
-};
-
-static const struct mips_pmu *mipspmu;
-
-static int
-mipspmu_event_set_period(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- s64 left = local64_read(&hwc->period_left);
- s64 period = hwc->sample_period;
- int ret = 0;
- u64 uleft;
- unsigned long flags;
-
- if (unlikely(left <= -period)) {
- left = period;
- local64_set(&hwc->period_left, left);
- hwc->last_period = period;
- ret = 1;
- }
-
- if (unlikely(left <= 0)) {
- left += period;
- local64_set(&hwc->period_left, left);
- hwc->last_period = period;
- ret = 1;
- }
-
- if (left > (s64)MAX_PERIOD)
- left = MAX_PERIOD;
-
- local64_set(&hwc->prev_count, (u64)-left);
-
- local_irq_save(flags);
- uleft = (u64)(-left) & MAX_PERIOD;
- uleft > VALID_COUNT ?
- set_bit(idx, cpuc->msbs) : clear_bit(idx, cpuc->msbs);
- mipspmu->write_counter(idx, (u64)(-left) & VALID_COUNT);
- local_irq_restore(flags);
-
- perf_event_update_userpage(event);
-
- return ret;
-}
-
-static void mipspmu_event_update(struct perf_event *event,
- struct hw_perf_event *hwc,
- int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- unsigned long flags;
- int shift = 64 - TOTAL_BITS;
- s64 prev_raw_count, new_raw_count;
- u64 delta;
-
-again:
- prev_raw_count = local64_read(&hwc->prev_count);
- local_irq_save(flags);
- /* Make the counter value be a "real" one. */
- new_raw_count = mipspmu->read_counter(idx);
- if (new_raw_count & (test_bit(idx, cpuc->msbs) << HIGHEST_BIT)) {
- new_raw_count &= VALID_COUNT;
- clear_bit(idx, cpuc->msbs);
- } else
- new_raw_count |= (test_bit(idx, cpuc->msbs) << HIGHEST_BIT);
- local_irq_restore(flags);
-
- if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
- new_raw_count) != prev_raw_count)
- goto again;
-
- delta = (new_raw_count << shift) - (prev_raw_count << shift);
- delta >>= shift;
-
- local64_add(delta, &event->count);
- local64_sub(delta, &hwc->period_left);
-}
-
-static void mipspmu_start(struct perf_event *event, int flags)
-{
- struct hw_perf_event *hwc = &event->hw;
-
- if (!mipspmu)
- return;
-
- if (flags & PERF_EF_RELOAD)
- WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-
- hwc->state = 0;
-
- /* Set the period for the event. */
- mipspmu_event_set_period(event, hwc, hwc->idx);
-
- /* Enable the event. */
- mipspmu->enable_event(hwc, hwc->idx);
-}
-
-static void mipspmu_stop(struct perf_event *event, int flags)
-{
- struct hw_perf_event *hwc = &event->hw;
-
- if (!mipspmu)
- return;
-
- if (!(hwc->state & PERF_HES_STOPPED)) {
- /* We are working on a local event. */
- mipspmu->disable_event(hwc->idx);
- barrier();
- mipspmu_event_update(event, hwc, hwc->idx);
- hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
- }
-}
-
-static int mipspmu_add(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx;
- int err = 0;
-
- perf_pmu_disable(event->pmu);
-
- /* To look for a free counter for this event. */
- idx = mipspmu->alloc_counter(cpuc, hwc);
- if (idx < 0) {
- err = idx;
- goto out;
- }
-
- /*
- * If there is an event in the counter we are going to use then
- * make sure it is disabled.
- */
- event->hw.idx = idx;
- mipspmu->disable_event(idx);
- cpuc->events[idx] = event;
-
- hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
- if (flags & PERF_EF_START)
- mipspmu_start(event, PERF_EF_RELOAD);
-
- /* Propagate our changes to the userspace mapping. */
- perf_event_update_userpage(event);
-
-out:
- perf_pmu_enable(event->pmu);
- return err;
-}
-
-static void mipspmu_del(struct perf_event *event, int flags)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- struct hw_perf_event *hwc = &event->hw;
- int idx = hwc->idx;
-
- WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
- mipspmu_stop(event, PERF_EF_UPDATE);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
-
- perf_event_update_userpage(event);
-}
-
-static void mipspmu_read(struct perf_event *event)
-{
- struct hw_perf_event *hwc = &event->hw;
-
- /* Don't read disabled counters! */
- if (hwc->idx < 0)
- return;
-
- mipspmu_event_update(event, hwc, hwc->idx);
-}
-
-static void mipspmu_enable(struct pmu *pmu)
-{
- if (mipspmu)
- mipspmu->start();
-}
-
-static void mipspmu_disable(struct pmu *pmu)
-{
- if (mipspmu)
- mipspmu->stop();
-}
-
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-static int (*save_perf_irq)(void);
-
-static int mipspmu_get_irq(void)
-{
- int err;
-
- if (mipspmu->irq >= 0) {
- /* Request my own irq handler. */
- err = request_irq(mipspmu->irq, mipspmu->handle_irq,
- IRQF_DISABLED | IRQF_NOBALANCING,
- "mips_perf_pmu", NULL);
- if (err) {
- pr_warning("Unable to request IRQ%d for MIPS "
- "performance counters!\n", mipspmu->irq);
- }
- } else if (cp0_perfcount_irq < 0) {
- /*
- * We are sharing the irq number with the timer interrupt.
- */
- save_perf_irq = perf_irq;
- perf_irq = mipspmu->handle_shared_irq;
- err = 0;
- } else {
- pr_warning("The platform hasn't properly defined its "
- "interrupt controller.\n");
- err = -ENOENT;
- }
-
- return err;
-}
-
-static void mipspmu_free_irq(void)
-{
- if (mipspmu->irq >= 0)
- free_irq(mipspmu->irq, NULL);
- else if (cp0_perfcount_irq < 0)
- perf_irq = save_perf_irq;
-}
-
-/*
- * mipsxx/rm9000/loongson2 have different performance counters, they have
- * specific low-level init routines.
- */
-static void reset_counters(void *arg);
-static int __hw_perf_event_init(struct perf_event *event);
-
-static void hw_perf_event_destroy(struct perf_event *event)
-{
- if (atomic_dec_and_mutex_lock(&active_events,
- &pmu_reserve_mutex)) {
- /*
- * We must not call the destroy function with interrupts
- * disabled.
- */
- on_each_cpu(reset_counters,
- (void *)(long)mipspmu->num_counters, 1);
- mipspmu_free_irq();
- mutex_unlock(&pmu_reserve_mutex);
- }
-}
-
-static int mipspmu_event_init(struct perf_event *event)
-{
- int err = 0;
-
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HARDWARE:
- case PERF_TYPE_HW_CACHE:
- break;
-
- default:
- return -ENOENT;
- }
-
- if (!mipspmu || event->cpu >= nr_cpumask_bits ||
- (event->cpu >= 0 && !cpu_online(event->cpu)))
- return -ENODEV;
-
- if (!atomic_inc_not_zero(&active_events)) {
- if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
- atomic_dec(&active_events);
- return -ENOSPC;
- }
-
- mutex_lock(&pmu_reserve_mutex);
- if (atomic_read(&active_events) == 0)
- err = mipspmu_get_irq();
-
- if (!err)
- atomic_inc(&active_events);
- mutex_unlock(&pmu_reserve_mutex);
- }
-
- if (err)
- return err;
-
- err = __hw_perf_event_init(event);
- if (err)
- hw_perf_event_destroy(event);
-
- return err;
-}
-
-static struct pmu pmu = {
- .pmu_enable = mipspmu_enable,
- .pmu_disable = mipspmu_disable,
- .event_init = mipspmu_event_init,
- .add = mipspmu_add,
- .del = mipspmu_del,
- .start = mipspmu_start,
- .stop = mipspmu_stop,
- .read = mipspmu_read,
-};
-
-static inline unsigned int
-mipspmu_perf_event_encode(const struct mips_perf_event *pev)
-{
-/*
- * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
- * event_id.
- */
-#ifdef CONFIG_MIPS_MT_SMP
- return ((unsigned int)pev->range << 24) |
- (pev->cntr_mask & 0xffff00) |
- (pev->event_id & 0xff);
-#else
- return (pev->cntr_mask & 0xffff00) |
- (pev->event_id & 0xff);
-#endif
-}
-
-static const struct mips_perf_event *
-mipspmu_map_general_event(int idx)
-{
- const struct mips_perf_event *pev;
-
- pev = ((*mipspmu->general_event_map)[idx].event_id ==
- UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) :
- &(*mipspmu->general_event_map)[idx]);
-
- return pev;
-}
-
-static const struct mips_perf_event *
-mipspmu_map_cache_event(u64 config)
-{
- unsigned int cache_type, cache_op, cache_result;
- const struct mips_perf_event *pev;
-
- cache_type = (config >> 0) & 0xff;
- if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
- return ERR_PTR(-EINVAL);
-
- cache_op = (config >> 8) & 0xff;
- if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
- return ERR_PTR(-EINVAL);
-
- cache_result = (config >> 16) & 0xff;
- if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
- return ERR_PTR(-EINVAL);
-
- pev = &((*mipspmu->cache_event_map)
- [cache_type]
- [cache_op]
- [cache_result]);
-
- if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID)
- return ERR_PTR(-EOPNOTSUPP);
-
- return pev;
-
-}
-
-static int validate_event(struct cpu_hw_events *cpuc,
- struct perf_event *event)
-{
- struct hw_perf_event fake_hwc = event->hw;
-
- /* Allow mixed event group. So return 1 to pass validation. */
- if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
- return 1;
-
- return mipspmu->alloc_counter(cpuc, &fake_hwc) >= 0;
-}
-
-static int validate_group(struct perf_event *event)
-{
- struct perf_event *sibling, *leader = event->group_leader;
- struct cpu_hw_events fake_cpuc;
-
- memset(&fake_cpuc, 0, sizeof(fake_cpuc));
-
- if (!validate_event(&fake_cpuc, leader))
- return -ENOSPC;
-
- list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
- if (!validate_event(&fake_cpuc, sibling))
- return -ENOSPC;
- }
-
- if (!validate_event(&fake_cpuc, event))
- return -ENOSPC;
-
- return 0;
-}
-
-/* This is needed by specific irq handlers in perf_event_*.c */
-static void
-handle_associated_event(struct cpu_hw_events *cpuc,
- int idx, struct perf_sample_data *data, struct pt_regs *regs)
-{
- struct perf_event *event = cpuc->events[idx];
- struct hw_perf_event *hwc = &event->hw;
-
- mipspmu_event_update(event, hwc, idx);
- data->period = event->hw.last_period;
- if (!mipspmu_event_set_period(event, hwc, idx))
- return;
-
- if (perf_event_overflow(event, data, regs))
- mipspmu->disable_event(idx);
-}
-
-#include "perf_event_mipsxx.c"
/* Callchain handling code. */
/*
* Leave userspace callchain empty for now. When we find a way to trace
- * the user stack callchains, we add here.
+ * the user stack callchains, we will add it here.
*/
-void perf_callchain_user(struct perf_callchain_entry *entry,
- struct pt_regs *regs)
-{
-}
static void save_raw_perf_callchain(struct perf_callchain_entry *entry,
unsigned long reg29)
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index e5ad09a..4f2971b 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1,13 +1,112 @@
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) || \
- defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_SB1)
+/*
+ * Linux performance counter support for MIPS.
+ *
+ * Copyright (C) 2010 MIPS Technologies, Inc.
+ * Copyright (C) 2011 Cavium Networks, Inc.
+ * Author: Deng-Cheng Zhu
+ *
+ * This code is based on the implementation for ARM, which is in turn
+ * based on the sparc64 perf event code and the x86 code. Performance
+ * counter access is based on the MIPS Oprofile code. And the callchain
+ * support references the code of MIPS stacktrace.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/perf_event.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+#include <asm/irq_regs.h>
+#include <asm/stacktrace.h>
+#include <asm/time.h> /* For perf_irq */
+
+#define MIPS_MAX_HWEVENTS 4
+
+struct cpu_hw_events {
+ /* Array of events on this cpu. */
+ struct perf_event *events[MIPS_MAX_HWEVENTS];
+
+ /*
+ * Set the bit (indexed by the counter number) when the counter
+ * is used for an event.
+ */
+ unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)];
+
+ /*
+ * Software copy of the control register for each performance counter.
+ * MIPS CPUs vary in performance counters. They use this differently,
+ * and even may not use it.
+ */
+ unsigned int saved_ctrl[MIPS_MAX_HWEVENTS];
+};
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
+ .saved_ctrl = {0},
+};
+
+/* The description of MIPS performance events. */
+struct mips_perf_event {
+ unsigned int event_id;
+ /*
+ * MIPS performance counters are indexed starting from 0.
+ * CNTR_EVEN indicates the indexes of the counters to be used are
+ * even numbers.
+ */
+ unsigned int cntr_mask;
+ #define CNTR_EVEN 0x55555555
+ #define CNTR_ODD 0xaaaaaaaa
+ #define CNTR_ALL 0xffffffff
+#ifdef CONFIG_MIPS_MT_SMP
+ enum {
+ T = 0,
+ V = 1,
+ P = 2,
+ } range;
+#else
+ #define T
+ #define V
+ #define P
+#endif
+};
+
+static struct mips_perf_event raw_event;
+static DEFINE_MUTEX(raw_event_mutex);
+
+#define UNSUPPORTED_PERF_EVENT_ID 0xffffffff
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+struct mips_pmu {
+ u64 max_period;
+ u64 valid_count;
+ u64 overflow;
+ const char *name;
+ int irq;
+ u64 (*read_counter)(unsigned int idx);
+ void (*write_counter)(unsigned int idx, u64 val);
+ const struct mips_perf_event *(*map_raw_event)(u64 config);
+ const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX];
+ const struct mips_perf_event (*cache_event_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+ unsigned int num_counters;
+};
+
+static struct mips_pmu mipspmu;
#define M_CONFIG1_PC (1 << 4)
-#define M_PERFCTL_EXL (1UL << 0)
-#define M_PERFCTL_KERNEL (1UL << 1)
-#define M_PERFCTL_SUPERVISOR (1UL << 2)
-#define M_PERFCTL_USER (1UL << 3)
-#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
+#define M_PERFCTL_EXL (1 << 0)
+#define M_PERFCTL_KERNEL (1 << 1)
+#define M_PERFCTL_SUPERVISOR (1 << 2)
+#define M_PERFCTL_USER (1 << 3)
+#define M_PERFCTL_INTERRUPT_ENABLE (1 << 4)
#define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5)
#define M_PERFCTL_VPEID(vpe) ((vpe) << 16)
#define M_PERFCTL_MT_EN(filter) ((filter) << 20)
@@ -15,8 +114,8 @@
#define M_TC_EN_VPE M_PERFCTL_MT_EN(1)
#define M_TC_EN_TC M_PERFCTL_MT_EN(2)
#define M_PERFCTL_TCID(tcid) ((tcid) << 22)
-#define M_PERFCTL_WIDE (1UL << 30)
-#define M_PERFCTL_MORE (1UL << 31)
+#define M_PERFCTL_WIDE (1 << 30)
+#define M_PERFCTL_MORE (1 << 31)
#define M_PERFCTL_COUNT_EVENT_WHENEVER (M_PERFCTL_EXL | \
M_PERFCTL_KERNEL | \
@@ -31,11 +130,12 @@
#endif
#define M_PERFCTL_EVENT_MASK 0xfe0
-#define M_COUNTER_OVERFLOW (1UL << 31)
#ifdef CONFIG_MIPS_MT_SMP
static int cpu_has_mipsmt_pertccounters;
+static DEFINE_RWLOCK(pmuint_rwlock);
+
/*
* FIXME: For VSMP, vpe_id() is redefined for Perf-events, because
* cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs.
@@ -49,79 +149,621 @@
#endif
/* Copied from op_model_mipsxx.c */
-static inline unsigned int vpe_shift(void)
+static unsigned int vpe_shift(void)
{
if (num_possible_cpus() > 1)
return 1;
return 0;
}
-#else /* !CONFIG_MIPS_MT_SMP */
-#define vpe_id() 0
-static inline unsigned int vpe_shift(void)
-{
- return 0;
-}
-#endif /* CONFIG_MIPS_MT_SMP */
-
-static inline unsigned int
-counters_total_to_per_cpu(unsigned int counters)
+static unsigned int counters_total_to_per_cpu(unsigned int counters)
{
return counters >> vpe_shift();
}
-static inline unsigned int
-counters_per_cpu_to_total(unsigned int counters)
+static unsigned int counters_per_cpu_to_total(unsigned int counters)
{
return counters << vpe_shift();
}
-#define __define_perf_accessors(r, n, np) \
- \
-static inline unsigned int r_c0_ ## r ## n(void) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- return read_c0_ ## r ## n(); \
- case 1: \
- return read_c0_ ## r ## np(); \
- default: \
- BUG(); \
- } \
- return 0; \
-} \
- \
-static inline void w_c0_ ## r ## n(unsigned int value) \
-{ \
- unsigned int cpu = vpe_id(); \
- \
- switch (cpu) { \
- case 0: \
- write_c0_ ## r ## n(value); \
- return; \
- case 1: \
- write_c0_ ## r ## np(value); \
- return; \
- default: \
- BUG(); \
- } \
- return; \
-} \
+#else /* !CONFIG_MIPS_MT_SMP */
+#define vpe_id() 0
-__define_perf_accessors(perfcntr, 0, 2)
-__define_perf_accessors(perfcntr, 1, 3)
-__define_perf_accessors(perfcntr, 2, 0)
-__define_perf_accessors(perfcntr, 3, 1)
+#endif /* CONFIG_MIPS_MT_SMP */
-__define_perf_accessors(perfctrl, 0, 2)
-__define_perf_accessors(perfctrl, 1, 3)
-__define_perf_accessors(perfctrl, 2, 0)
-__define_perf_accessors(perfctrl, 3, 1)
+static void resume_local_counters(void);
+static void pause_local_counters(void);
+static irqreturn_t mipsxx_pmu_handle_irq(int, void *);
+static int mipsxx_pmu_handle_shared_irq(void);
-static inline int __n_counters(void)
+static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx)
+{
+ if (vpe_id() == 1)
+ idx = (idx + 2) & 3;
+ return idx;
+}
+
+static u64 mipsxx_pmu_read_counter(unsigned int idx)
+{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+ switch (idx) {
+ case 0:
+ /*
+ * The counters are unsigned, we must cast to truncate
+ * off the high bits.
+ */
+ return (u32)read_c0_perfcntr0();
+ case 1:
+ return (u32)read_c0_perfcntr1();
+ case 2:
+ return (u32)read_c0_perfcntr2();
+ case 3:
+ return (u32)read_c0_perfcntr3();
+ default:
+ WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+ return 0;
+ }
+}
+
+static u64 mipsxx_pmu_read_counter_64(unsigned int idx)
+{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+ switch (idx) {
+ case 0:
+ return read_c0_perfcntr0_64();
+ case 1:
+ return read_c0_perfcntr1_64();
+ case 2:
+ return read_c0_perfcntr2_64();
+ case 3:
+ return read_c0_perfcntr3_64();
+ default:
+ WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+ return 0;
+ }
+}
+
+static void mipsxx_pmu_write_counter(unsigned int idx, u64 val)
+{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+ switch (idx) {
+ case 0:
+ write_c0_perfcntr0(val);
+ return;
+ case 1:
+ write_c0_perfcntr1(val);
+ return;
+ case 2:
+ write_c0_perfcntr2(val);
+ return;
+ case 3:
+ write_c0_perfcntr3(val);
+ return;
+ }
+}
+
+static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val)
+{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+ switch (idx) {
+ case 0:
+ write_c0_perfcntr0_64(val);
+ return;
+ case 1:
+ write_c0_perfcntr1_64(val);
+ return;
+ case 2:
+ write_c0_perfcntr2_64(val);
+ return;
+ case 3:
+ write_c0_perfcntr3_64(val);
+ return;
+ }
+}
+
+static unsigned int mipsxx_pmu_read_control(unsigned int idx)
+{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+ switch (idx) {
+ case 0:
+ return read_c0_perfctrl0();
+ case 1:
+ return read_c0_perfctrl1();
+ case 2:
+ return read_c0_perfctrl2();
+ case 3:
+ return read_c0_perfctrl3();
+ default:
+ WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
+ return 0;
+ }
+}
+
+static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
+{
+ idx = mipsxx_pmu_swizzle_perf_idx(idx);
+
+ switch (idx) {
+ case 0:
+ write_c0_perfctrl0(val);
+ return;
+ case 1:
+ write_c0_perfctrl1(val);
+ return;
+ case 2:
+ write_c0_perfctrl2(val);
+ return;
+ case 3:
+ write_c0_perfctrl3(val);
+ return;
+ }
+}
+
+static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
+ struct hw_perf_event *hwc)
+{
+ int i;
+
+ /*
+ * We only need to care the counter mask. The range has been
+ * checked definitely.
+ */
+ unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
+
+ for (i = mipspmu.num_counters - 1; i >= 0; i--) {
+ /*
+ * Note that some MIPS perf events can be counted by both
+ * even and odd counters, wheresas many other are only by
+ * even _or_ odd counters. This introduces an issue that
+ * when the former kind of event takes the counter the
+ * latter kind of event wants to use, then the "counter
+ * allocation" for the latter event will fail. In fact if
+ * they can be dynamically swapped, they both feel happy.
+ * But here we leave this issue alone for now.
+ */
+ if (test_bit(i, &cntr_mask) &&
+ !test_and_set_bit(i, cpuc->used_mask))
+ return i;
+ }
+
+ return -EAGAIN;
+}
+
+static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+ cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
+ (evt->config_base & M_PERFCTL_CONFIG_MASK) |
+ /* Make sure interrupt enabled. */
+ M_PERFCTL_INTERRUPT_ENABLE;
+ /*
+ * We do not actually let the counter run. Leave it until start().
+ */
+}
+
+static void mipsxx_pmu_disable_event(int idx)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ unsigned long flags;
+
+ WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+ local_irq_save(flags);
+ cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
+ ~M_PERFCTL_COUNT_EVENT_WHENEVER;
+ mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
+ local_irq_restore(flags);
+}
+
+static int mipspmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ u64 left = local64_read(&hwc->period_left);
+ u64 period = hwc->sample_period;
+ int ret = 0;
+
+ if (unlikely((left + period) & (1ULL << 63))) {
+ /* left underflowed by more than period. */
+ left = period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ } else if (unlikely((left + period) <= period)) {
+ /* left underflowed by less than period. */
+ left += period;
+ local64_set(&hwc->period_left, left);
+ hwc->last_period = period;
+ ret = 1;
+ }
+
+ if (left > mipspmu.max_period) {
+ left = mipspmu.max_period;
+ local64_set(&hwc->period_left, left);
+ }
+
+ local64_set(&hwc->prev_count, mipspmu.overflow - left);
+
+ mipspmu.write_counter(idx, mipspmu.overflow - left);
+
+ perf_event_update_userpage(event);
+
+ return ret;
+}
+
+static void mipspmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx)
+{
+ u64 prev_raw_count, new_raw_count;
+ u64 delta;
+
+again:
+ prev_raw_count = local64_read(&hwc->prev_count);
+ new_raw_count = mipspmu.read_counter(idx);
+
+ if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ delta = new_raw_count - prev_raw_count;
+
+ local64_add(delta, &event->count);
+ local64_sub(delta, &hwc->period_left);
+}
+
+static void mipspmu_start(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (flags & PERF_EF_RELOAD)
+ WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+ hwc->state = 0;
+
+ /* Set the period for the event. */
+ mipspmu_event_set_period(event, hwc, hwc->idx);
+
+ /* Enable the event. */
+ mipsxx_pmu_enable_event(hwc, hwc->idx);
+}
+
+static void mipspmu_stop(struct perf_event *event, int flags)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (!(hwc->state & PERF_HES_STOPPED)) {
+ /* We are working on a local event. */
+ mipsxx_pmu_disable_event(hwc->idx);
+ barrier();
+ mipspmu_event_update(event, hwc, hwc->idx);
+ hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
+ }
+}
+
+static int mipspmu_add(struct perf_event *event, int flags)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+ int err = 0;
+
+ perf_pmu_disable(event->pmu);
+
+ /* To look for a free counter for this event. */
+ idx = mipsxx_pmu_alloc_counter(cpuc, hwc);
+ if (idx < 0) {
+ err = idx;
+ goto out;
+ }
+
+ /*
+ * If there is an event in the counter we are going to use then
+ * make sure it is disabled.
+ */
+ event->hw.idx = idx;
+ mipsxx_pmu_disable_event(idx);
+ cpuc->events[idx] = event;
+
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+ if (flags & PERF_EF_START)
+ mipspmu_start(event, PERF_EF_RELOAD);
+
+ /* Propagate our changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+
+out:
+ perf_pmu_enable(event->pmu);
+ return err;
+}
+
+static void mipspmu_del(struct perf_event *event, int flags)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
+
+ mipspmu_stop(event, PERF_EF_UPDATE);
+ cpuc->events[idx] = NULL;
+ clear_bit(idx, cpuc->used_mask);
+
+ perf_event_update_userpage(event);
+}
+
+static void mipspmu_read(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ /* Don't read disabled counters! */
+ if (hwc->idx < 0)
+ return;
+
+ mipspmu_event_update(event, hwc, hwc->idx);
+}
+
+static void mipspmu_enable(struct pmu *pmu)
+{
+#ifdef CONFIG_MIPS_MT_SMP
+ write_unlock(&pmuint_rwlock);
+#endif
+ resume_local_counters();
+}
+
+/*
+ * MIPS performance counters can be per-TC. The control registers can
+ * not be directly accessed accross CPUs. Hence if we want to do global
+ * control, we need cross CPU calls. on_each_cpu() can help us, but we
+ * can not make sure this function is called with interrupts enabled. So
+ * here we pause local counters and then grab a rwlock and leave the
+ * counters on other CPUs alone. If any counter interrupt raises while
+ * we own the write lock, simply pause local counters on that CPU and
+ * spin in the handler. Also we know we won't be switched to another
+ * CPU after pausing local counters and before grabbing the lock.
+ */
+static void mipspmu_disable(struct pmu *pmu)
+{
+ pause_local_counters();
+#ifdef CONFIG_MIPS_MT_SMP
+ write_lock(&pmuint_rwlock);
+#endif
+}
+
+static atomic_t active_events = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmu_reserve_mutex);
+static int (*save_perf_irq)(void);
+
+static int mipspmu_get_irq(void)
+{
+ int err;
+
+ if (mipspmu.irq >= 0) {
+ /* Request my own irq handler. */
+ err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq,
+ IRQF_PERCPU | IRQF_NOBALANCING,
+ "mips_perf_pmu", NULL);
+ if (err) {
+ pr_warning("Unable to request IRQ%d for MIPS "
+ "performance counters!\n", mipspmu.irq);
+ }
+ } else if (cp0_perfcount_irq < 0) {
+ /*
+ * We are sharing the irq number with the timer interrupt.
+ */
+ save_perf_irq = perf_irq;
+ perf_irq = mipsxx_pmu_handle_shared_irq;
+ err = 0;
+ } else {
+ pr_warning("The platform hasn't properly defined its "
+ "interrupt controller.\n");
+ err = -ENOENT;
+ }
+
+ return err;
+}
+
+static void mipspmu_free_irq(void)
+{
+ if (mipspmu.irq >= 0)
+ free_irq(mipspmu.irq, NULL);
+ else if (cp0_perfcount_irq < 0)
+ perf_irq = save_perf_irq;
+}
+
+/*
+ * mipsxx/rm9000/loongson2 have different performance counters, they have
+ * specific low-level init routines.
+ */
+static void reset_counters(void *arg);
+static int __hw_perf_event_init(struct perf_event *event);
+
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+ if (atomic_dec_and_mutex_lock(&active_events,
+ &pmu_reserve_mutex)) {
+ /*
+ * We must not call the destroy function with interrupts
+ * disabled.
+ */
+ on_each_cpu(reset_counters,
+ (void *)(long)mipspmu.num_counters, 1);
+ mipspmu_free_irq();
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+}
+
+static int mipspmu_event_init(struct perf_event *event)
+{
+ int err = 0;
+
+ switch (event->attr.type) {
+ case PERF_TYPE_RAW:
+ case PERF_TYPE_HARDWARE:
+ case PERF_TYPE_HW_CACHE:
+ break;
+
+ default:
+ return -ENOENT;
+ }
+
+ if (event->cpu >= nr_cpumask_bits ||
+ (event->cpu >= 0 && !cpu_online(event->cpu)))
+ return -ENODEV;
+
+ if (!atomic_inc_not_zero(&active_events)) {
+ if (atomic_read(&active_events) > MIPS_MAX_HWEVENTS) {
+ atomic_dec(&active_events);
+ return -ENOSPC;
+ }
+
+ mutex_lock(&pmu_reserve_mutex);
+ if (atomic_read(&active_events) == 0)
+ err = mipspmu_get_irq();
+
+ if (!err)
+ atomic_inc(&active_events);
+ mutex_unlock(&pmu_reserve_mutex);
+ }
+
+ if (err)
+ return err;
+
+ err = __hw_perf_event_init(event);
+ if (err)
+ hw_perf_event_destroy(event);
+
+ return err;
+}
+
+static struct pmu pmu = {
+ .pmu_enable = mipspmu_enable,
+ .pmu_disable = mipspmu_disable,
+ .event_init = mipspmu_event_init,
+ .add = mipspmu_add,
+ .del = mipspmu_del,
+ .start = mipspmu_start,
+ .stop = mipspmu_stop,
+ .read = mipspmu_read,
+};
+
+static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev)
+{
+/*
+ * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for
+ * event_id.
+ */
+#ifdef CONFIG_MIPS_MT_SMP
+ return ((unsigned int)pev->range << 24) |
+ (pev->cntr_mask & 0xffff00) |
+ (pev->event_id & 0xff);
+#else
+ return (pev->cntr_mask & 0xffff00) |
+ (pev->event_id & 0xff);
+#endif
+}
+
+static const struct mips_perf_event *mipspmu_map_general_event(int idx)
+{
+ const struct mips_perf_event *pev;
+
+ pev = ((*mipspmu.general_event_map)[idx].event_id ==
+ UNSUPPORTED_PERF_EVENT_ID ? ERR_PTR(-EOPNOTSUPP) :
+ &(*mipspmu.general_event_map)[idx]);
+
+ return pev;
+}
+
+static const struct mips_perf_event *mipspmu_map_cache_event(u64 config)
+{
+ unsigned int cache_type, cache_op, cache_result;
+ const struct mips_perf_event *pev;
+
+ cache_type = (config >> 0) & 0xff;
+ if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+ return ERR_PTR(-EINVAL);
+
+ cache_op = (config >> 8) & 0xff;
+ if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+ return ERR_PTR(-EINVAL);
+
+ cache_result = (config >> 16) & 0xff;
+ if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ return ERR_PTR(-EINVAL);
+
+ pev = &((*mipspmu.cache_event_map)
+ [cache_type]
+ [cache_op]
+ [cache_result]);
+
+ if (pev->event_id == UNSUPPORTED_PERF_EVENT_ID)
+ return ERR_PTR(-EOPNOTSUPP);
+
+ return pev;
+
+}
+
+static int validate_event(struct cpu_hw_events *cpuc,
+ struct perf_event *event)
+{
+ struct hw_perf_event fake_hwc = event->hw;
+
+ /* Allow mixed event group. So return 1 to pass validation. */
+ if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+ return 1;
+
+ return mipsxx_pmu_alloc_counter(cpuc, &fake_hwc) >= 0;
+}
+
+static int validate_group(struct perf_event *event)
+{
+ struct perf_event *sibling, *leader = event->group_leader;
+ struct cpu_hw_events fake_cpuc;
+
+ memset(&fake_cpuc, 0, sizeof(fake_cpuc));
+
+ if (!validate_event(&fake_cpuc, leader))
+ return -ENOSPC;
+
+ list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+ if (!validate_event(&fake_cpuc, sibling))
+ return -ENOSPC;
+ }
+
+ if (!validate_event(&fake_cpuc, event))
+ return -ENOSPC;
+
+ return 0;
+}
+
+/* This is needed by specific irq handlers in perf_event_*.c */
+static void handle_associated_event(struct cpu_hw_events *cpuc,
+ int idx, struct perf_sample_data *data,
+ struct pt_regs *regs)
+{
+ struct perf_event *event = cpuc->events[idx];
+ struct hw_perf_event *hwc = &event->hw;
+
+ mipspmu_event_update(event, hwc, idx);
+ data->period = event->hw.last_period;
+ if (!mipspmu_event_set_period(event, hwc, idx))
+ return;
+
+ if (perf_event_overflow(event, data, regs))
+ mipsxx_pmu_disable_event(idx);
+}
+
+
+static int __n_counters(void)
{
if (!(read_c0_config1() & M_CONFIG1_PC))
return 0;
@@ -135,7 +777,7 @@
return 4;
}
-static inline int n_counters(void)
+static int n_counters(void)
{
int counters;
@@ -161,98 +803,20 @@
int counters = (int)(long)arg;
switch (counters) {
case 4:
- w_c0_perfctrl3(0);
- w_c0_perfcntr3(0);
+ mipsxx_pmu_write_control(3, 0);
+ mipspmu.write_counter(3, 0);
case 3:
- w_c0_perfctrl2(0);
- w_c0_perfcntr2(0);
+ mipsxx_pmu_write_control(2, 0);
+ mipspmu.write_counter(2, 0);
case 2:
- w_c0_perfctrl1(0);
- w_c0_perfcntr1(0);
+ mipsxx_pmu_write_control(1, 0);
+ mipspmu.write_counter(1, 0);
case 1:
- w_c0_perfctrl0(0);
- w_c0_perfcntr0(0);
+ mipsxx_pmu_write_control(0, 0);
+ mipspmu.write_counter(0, 0);
}
}
-static inline u64
-mipsxx_pmu_read_counter(unsigned int idx)
-{
- switch (idx) {
- case 0:
- return r_c0_perfcntr0();
- case 1:
- return r_c0_perfcntr1();
- case 2:
- return r_c0_perfcntr2();
- case 3:
- return r_c0_perfcntr3();
- default:
- WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
- return 0;
- }
-}
-
-static inline void
-mipsxx_pmu_write_counter(unsigned int idx, u64 val)
-{
- switch (idx) {
- case 0:
- w_c0_perfcntr0(val);
- return;
- case 1:
- w_c0_perfcntr1(val);
- return;
- case 2:
- w_c0_perfcntr2(val);
- return;
- case 3:
- w_c0_perfcntr3(val);
- return;
- }
-}
-
-static inline unsigned int
-mipsxx_pmu_read_control(unsigned int idx)
-{
- switch (idx) {
- case 0:
- return r_c0_perfctrl0();
- case 1:
- return r_c0_perfctrl1();
- case 2:
- return r_c0_perfctrl2();
- case 3:
- return r_c0_perfctrl3();
- default:
- WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx);
- return 0;
- }
-}
-
-static inline void
-mipsxx_pmu_write_control(unsigned int idx, unsigned int val)
-{
- switch (idx) {
- case 0:
- w_c0_perfctrl0(val);
- return;
- case 1:
- w_c0_perfctrl1(val);
- return;
- case 2:
- w_c0_perfctrl2(val);
- return;
- case 3:
- w_c0_perfctrl3(val);
- return;
- }
-}
-
-#ifdef CONFIG_MIPS_MT_SMP
-static DEFINE_RWLOCK(pmuint_rwlock);
-#endif
-
/* 24K/34K/1004K cores can share the same event map. */
static const struct mips_perf_event mipsxxcore_event_map
[PERF_COUNT_HW_MAX] = {
@@ -277,6 +841,16 @@
[PERF_COUNT_HW_BUS_CYCLES] = { UNSUPPORTED_PERF_EVENT_ID },
};
+static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL },
+ [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL },
+ [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL },
+ [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL },
+ [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL },
+ [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL },
+};
+
/* 24K/34K/1004K cores can share the same cache event map. */
static const struct mips_perf_event mipsxxcore_cache_map
[PERF_COUNT_HW_CACHE_MAX]
@@ -510,10 +1084,105 @@
},
};
+
+static const struct mips_perf_event octeon_cache_map
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+[C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x2b, CNTR_ALL },
+ [C(RESULT_MISS)] = { 0x2e, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x30, CNTR_ALL },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x18, CNTR_ALL },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { 0x19, CNTR_ALL },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(DTLB)] = {
+ /*
+ * Only general DTLB misses are counted use the same event for
+ * read and write.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { 0x35, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { 0x35, CNTR_ALL },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { 0x37, CNTR_ALL },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+[C(BPU)] = {
+ /* Using the same code for *HW_BRANCH* */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ [C(RESULT_MISS)] = { UNSUPPORTED_PERF_EVENT_ID },
+ },
+},
+};
+
#ifdef CONFIG_MIPS_MT_SMP
-static void
-check_and_calc_range(struct perf_event *event,
- const struct mips_perf_event *pev)
+static void check_and_calc_range(struct perf_event *event,
+ const struct mips_perf_event *pev)
{
struct hw_perf_event *hwc = &event->hw;
@@ -536,9 +1205,8 @@
hwc->config_base |= M_TC_EN_ALL;
}
#else
-static void
-check_and_calc_range(struct perf_event *event,
- const struct mips_perf_event *pev)
+static void check_and_calc_range(struct perf_event *event,
+ const struct mips_perf_event *pev)
{
}
#endif
@@ -560,7 +1228,7 @@
} else if (PERF_TYPE_RAW == event->attr.type) {
/* We are working on the global raw event. */
mutex_lock(&raw_event_mutex);
- pev = mipspmu->map_raw_event(event->attr.config);
+ pev = mipspmu.map_raw_event(event->attr.config);
} else {
/* The event type is not (yet) supported. */
return -EOPNOTSUPP;
@@ -605,7 +1273,7 @@
hwc->config = 0;
if (!hwc->sample_period) {
- hwc->sample_period = MAX_PERIOD;
+ hwc->sample_period = mipspmu.max_period;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
@@ -618,70 +1286,47 @@
}
event->destroy = hw_perf_event_destroy;
-
return err;
}
static void pause_local_counters(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- int counters = mipspmu->num_counters;
+ int ctr = mipspmu.num_counters;
unsigned long flags;
local_irq_save(flags);
- switch (counters) {
- case 4:
- cpuc->saved_ctrl[3] = r_c0_perfctrl3();
- w_c0_perfctrl3(cpuc->saved_ctrl[3] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- case 3:
- cpuc->saved_ctrl[2] = r_c0_perfctrl2();
- w_c0_perfctrl2(cpuc->saved_ctrl[2] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- case 2:
- cpuc->saved_ctrl[1] = r_c0_perfctrl1();
- w_c0_perfctrl1(cpuc->saved_ctrl[1] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- case 1:
- cpuc->saved_ctrl[0] = r_c0_perfctrl0();
- w_c0_perfctrl0(cpuc->saved_ctrl[0] &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER);
- }
+ do {
+ ctr--;
+ cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr);
+ mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] &
+ ~M_PERFCTL_COUNT_EVENT_WHENEVER);
+ } while (ctr > 0);
local_irq_restore(flags);
}
static void resume_local_counters(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- int counters = mipspmu->num_counters;
- unsigned long flags;
+ int ctr = mipspmu.num_counters;
- local_irq_save(flags);
- switch (counters) {
- case 4:
- w_c0_perfctrl3(cpuc->saved_ctrl[3]);
- case 3:
- w_c0_perfctrl2(cpuc->saved_ctrl[2]);
- case 2:
- w_c0_perfctrl1(cpuc->saved_ctrl[1]);
- case 1:
- w_c0_perfctrl0(cpuc->saved_ctrl[0]);
- }
- local_irq_restore(flags);
+ do {
+ ctr--;
+ mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]);
+ } while (ctr > 0);
}
static int mipsxx_pmu_handle_shared_irq(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct perf_sample_data data;
- unsigned int counters = mipspmu->num_counters;
- unsigned int counter;
+ unsigned int counters = mipspmu.num_counters;
+ u64 counter;
int handled = IRQ_NONE;
struct pt_regs *regs;
if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26)))
return handled;
-
/*
* First we pause the local counters, so that when we are locked
* here, the counters are all paused. When it gets locked due to
@@ -702,13 +1347,9 @@
#define HANDLE_COUNTER(n) \
case n + 1: \
if (test_bit(n, cpuc->used_mask)) { \
- counter = r_c0_perfcntr ## n(); \
- if (counter & M_COUNTER_OVERFLOW) { \
- w_c0_perfcntr ## n(counter & \
- VALID_COUNT); \
- if (test_and_change_bit(n, cpuc->msbs)) \
- handle_associated_event(cpuc, \
- n, &data, regs); \
+ counter = mipspmu.read_counter(n); \
+ if (counter & mipspmu.overflow) { \
+ handle_associated_event(cpuc, n, &data, regs); \
handled = IRQ_HANDLED; \
} \
}
@@ -733,104 +1374,11 @@
return handled;
}
-static irqreturn_t
-mipsxx_pmu_handle_irq(int irq, void *dev)
+static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev)
{
return mipsxx_pmu_handle_shared_irq();
}
-static void mipsxx_pmu_start(void)
-{
-#ifdef CONFIG_MIPS_MT_SMP
- write_unlock(&pmuint_rwlock);
-#endif
- resume_local_counters();
-}
-
-/*
- * MIPS performance counters can be per-TC. The control registers can
- * not be directly accessed across CPUs. Hence if we want to do global
- * control, we need cross CPU calls. on_each_cpu() can help us, but we
- * can not make sure this function is called with interrupts enabled. So
- * here we pause local counters and then grab a rwlock and leave the
- * counters on other CPUs alone. If any counter interrupt raises while
- * we own the write lock, simply pause local counters on that CPU and
- * spin in the handler. Also we know we won't be switched to another
- * CPU after pausing local counters and before grabbing the lock.
- */
-static void mipsxx_pmu_stop(void)
-{
- pause_local_counters();
-#ifdef CONFIG_MIPS_MT_SMP
- write_lock(&pmuint_rwlock);
-#endif
-}
-
-static int
-mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc)
-{
- int i;
-
- /*
- * We only need to care the counter mask. The range has been
- * checked definitely.
- */
- unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff;
-
- for (i = mipspmu->num_counters - 1; i >= 0; i--) {
- /*
- * Note that some MIPS perf events can be counted by both
- * even and odd counters, wheresas many other are only by
- * even _or_ odd counters. This introduces an issue that
- * when the former kind of event takes the counter the
- * latter kind of event wants to use, then the "counter
- * allocation" for the latter event will fail. In fact if
- * they can be dynamically swapped, they both feel happy.
- * But here we leave this issue alone for now.
- */
- if (test_bit(i, &cntr_mask) &&
- !test_and_set_bit(i, cpuc->used_mask))
- return i;
- }
-
- return -EAGAIN;
-}
-
-static void
-mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- unsigned long flags;
-
- WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
- local_irq_save(flags);
- cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) |
- (evt->config_base & M_PERFCTL_CONFIG_MASK) |
- /* Make sure interrupt enabled. */
- M_PERFCTL_INTERRUPT_ENABLE;
- /*
- * We do not actually let the counter run. Leave it until start().
- */
- local_irq_restore(flags);
-}
-
-static void
-mipsxx_pmu_disable_event(int idx)
-{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
- unsigned long flags;
-
- WARN_ON(idx < 0 || idx >= mipspmu->num_counters);
-
- local_irq_save(flags);
- cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) &
- ~M_PERFCTL_COUNT_EVENT_WHENEVER;
- mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]);
- local_irq_restore(flags);
-}
-
/* 24K */
#define IS_UNSUPPORTED_24K_EVENT(r, b) \
((b) == 12 || (r) == 151 || (r) == 152 || (b) == 26 || \
@@ -892,8 +1440,7 @@
* then 128 needs to be added to 15 as the input for the event config,
* i.e., 143 (0x8F) to be used.
*/
-static const struct mips_perf_event *
-mipsxx_pmu_map_raw_event(u64 config)
+static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
{
unsigned int raw_id = config & 0xff;
unsigned int base_id = raw_id & 0x7f;
@@ -970,40 +1517,44 @@
return &raw_event;
}
-static struct mips_pmu mipsxxcore_pmu = {
- .handle_irq = mipsxx_pmu_handle_irq,
- .handle_shared_irq = mipsxx_pmu_handle_shared_irq,
- .start = mipsxx_pmu_start,
- .stop = mipsxx_pmu_stop,
- .alloc_counter = mipsxx_pmu_alloc_counter,
- .read_counter = mipsxx_pmu_read_counter,
- .write_counter = mipsxx_pmu_write_counter,
- .enable_event = mipsxx_pmu_enable_event,
- .disable_event = mipsxx_pmu_disable_event,
- .map_raw_event = mipsxx_pmu_map_raw_event,
- .general_event_map = &mipsxxcore_event_map,
- .cache_event_map = &mipsxxcore_cache_map,
-};
+static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config)
+{
+ unsigned int raw_id = config & 0xff;
+ unsigned int base_id = raw_id & 0x7f;
-static struct mips_pmu mipsxx74Kcore_pmu = {
- .handle_irq = mipsxx_pmu_handle_irq,
- .handle_shared_irq = mipsxx_pmu_handle_shared_irq,
- .start = mipsxx_pmu_start,
- .stop = mipsxx_pmu_stop,
- .alloc_counter = mipsxx_pmu_alloc_counter,
- .read_counter = mipsxx_pmu_read_counter,
- .write_counter = mipsxx_pmu_write_counter,
- .enable_event = mipsxx_pmu_enable_event,
- .disable_event = mipsxx_pmu_disable_event,
- .map_raw_event = mipsxx_pmu_map_raw_event,
- .general_event_map = &mipsxx74Kcore_event_map,
- .cache_event_map = &mipsxx74Kcore_cache_map,
-};
+
+ raw_event.cntr_mask = CNTR_ALL;
+ raw_event.event_id = base_id;
+
+ if (current_cpu_type() == CPU_CAVIUM_OCTEON2) {
+ if (base_id > 0x42)
+ return ERR_PTR(-EOPNOTSUPP);
+ } else {
+ if (base_id > 0x3a)
+ return ERR_PTR(-EOPNOTSUPP);
+ }
+
+ switch (base_id) {
+ case 0x00:
+ case 0x0f:
+ case 0x1e:
+ case 0x1f:
+ case 0x2f:
+ case 0x34:
+ case 0x3b ... 0x3f:
+ return ERR_PTR(-EOPNOTSUPP);
+ default:
+ break;
+ }
+
+ return &raw_event;
+}
static int __init
init_hw_perf_events(void)
{
int counters, irq;
+ int counter_bits;
pr_info("Performance counters: ");
@@ -1035,32 +1586,36 @@
}
#endif
- on_each_cpu(reset_counters, (void *)(long)counters, 1);
+ mipspmu.map_raw_event = mipsxx_pmu_map_raw_event;
switch (current_cpu_type()) {
case CPU_24K:
- mipsxxcore_pmu.name = "mips/24K";
- mipsxxcore_pmu.num_counters = counters;
- mipsxxcore_pmu.irq = irq;
- mipspmu = &mipsxxcore_pmu;
+ mipspmu.name = "mips/24K";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
break;
case CPU_34K:
- mipsxxcore_pmu.name = "mips/34K";
- mipsxxcore_pmu.num_counters = counters;
- mipsxxcore_pmu.irq = irq;
- mipspmu = &mipsxxcore_pmu;
+ mipspmu.name = "mips/34K";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
break;
case CPU_74K:
- mipsxx74Kcore_pmu.name = "mips/74K";
- mipsxx74Kcore_pmu.num_counters = counters;
- mipsxx74Kcore_pmu.irq = irq;
- mipspmu = &mipsxx74Kcore_pmu;
+ mipspmu.name = "mips/74K";
+ mipspmu.general_event_map = &mipsxx74Kcore_event_map;
+ mipspmu.cache_event_map = &mipsxx74Kcore_cache_map;
break;
case CPU_1004K:
- mipsxxcore_pmu.name = "mips/1004K";
- mipsxxcore_pmu.num_counters = counters;
- mipsxxcore_pmu.irq = irq;
- mipspmu = &mipsxxcore_pmu;
+ mipspmu.name = "mips/1004K";
+ mipspmu.general_event_map = &mipsxxcore_event_map;
+ mipspmu.cache_event_map = &mipsxxcore_cache_map;
+ break;
+ case CPU_CAVIUM_OCTEON:
+ case CPU_CAVIUM_OCTEON_PLUS:
+ case CPU_CAVIUM_OCTEON2:
+ mipspmu.name = "octeon";
+ mipspmu.general_event_map = &octeon_event_map;
+ mipspmu.cache_event_map = &octeon_cache_map;
+ mipspmu.map_raw_event = octeon_pmu_map_raw_event;
break;
default:
pr_cont("Either hardware does not support performance "
@@ -1068,15 +1623,33 @@
return -ENODEV;
}
- if (mipspmu)
- pr_cont("%s PMU enabled, %d counters available to each "
- "CPU, irq %d%s\n", mipspmu->name, counters, irq,
- irq < 0 ? " (share with timer interrupt)" : "");
+ mipspmu.num_counters = counters;
+ mipspmu.irq = irq;
+
+ if (read_c0_perfctrl0() & M_PERFCTL_WIDE) {
+ mipspmu.max_period = (1ULL << 63) - 1;
+ mipspmu.valid_count = (1ULL << 63) - 1;
+ mipspmu.overflow = 1ULL << 63;
+ mipspmu.read_counter = mipsxx_pmu_read_counter_64;
+ mipspmu.write_counter = mipsxx_pmu_write_counter_64;
+ counter_bits = 64;
+ } else {
+ mipspmu.max_period = (1ULL << 31) - 1;
+ mipspmu.valid_count = (1ULL << 31) - 1;
+ mipspmu.overflow = 1ULL << 31;
+ mipspmu.read_counter = mipsxx_pmu_read_counter;
+ mipspmu.write_counter = mipsxx_pmu_write_counter;
+ counter_bits = 32;
+ }
+
+ on_each_cpu(reset_counters, (void *)(long)counters, 1);
+
+ pr_cont("%s PMU enabled, %d %d-bit counters available to each "
+ "CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq,
+ irq < 0 ? " (share with timer interrupt)" : "");
perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
return 0;
}
early_initcall(init_hw_perf_events);
-
-#endif /* defined(CONFIG_CPU_MIPS32)... */
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 865bc7a..4792065 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -496,7 +496,7 @@
sys sys_lookup_dcookie 4
sys sys_epoll_create 1
sys sys_epoll_ctl 4
- sys sys_epoll_wait 3 /* 4250 */
+ sys sys_epoll_wait 4 /* 4250 */
sys sys_remap_file_pages 5
sys sys_set_tid_address 1
sys sys_restart_syscall 0
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
index 16c4d25..daa81f7 100644
--- a/arch/mips/mm/c-octeon.c
+++ b/arch/mips/mm/c-octeon.c
@@ -169,6 +169,10 @@
octeon_flush_icache_all_cores(vma);
}
+static void octeon_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ BUG();
+}
/**
* Probe Octeon's caches
@@ -273,6 +277,8 @@
flush_icache_range = octeon_flush_icache_range;
local_flush_icache_range = local_octeon_flush_icache_range;
+ __flush_kernel_vmap_range = octeon_flush_kernel_vmap_range;
+
build_clear_page();
build_copy_page();
}
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index e6b0efd..0765583 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -299,6 +299,11 @@
write_c0_status(flags);
}
+static void r3k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ BUG();
+}
+
static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size)
{
/* Catch bad driver code */
@@ -323,6 +328,8 @@
flush_icache_range = r3k_flush_icache_range;
local_flush_icache_range = r3k_flush_icache_range;
+ __flush_kernel_vmap_range = r3k_flush_kernel_vmap_range;
+
flush_cache_sigtramp = r3k_flush_cache_sigtramp;
local_flush_data_cache_page = local_r3k_flush_data_cache_page;
flush_data_cache_page = r3k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index b9aabb9..a79fe9a 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -722,6 +722,39 @@
r4k_blast_icache();
}
+struct flush_kernel_vmap_range_args {
+ unsigned long vaddr;
+ int size;
+};
+
+static inline void local_r4k_flush_kernel_vmap_range(void *args)
+{
+ struct flush_kernel_vmap_range_args *vmra = args;
+ unsigned long vaddr = vmra->vaddr;
+ int size = vmra->size;
+
+ /*
+ * Aliases only affect the primary caches so don't bother with
+ * S-caches or T-caches.
+ */
+ if (cpu_has_safe_index_cacheops && size >= dcache_size)
+ r4k_blast_dcache();
+ else {
+ R4600_HIT_CACHEOP_WAR_IMPL;
+ blast_dcache_range(vaddr, vaddr + size);
+ }
+}
+
+static void r4k_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ struct flush_kernel_vmap_range_args args;
+
+ args.vaddr = (unsigned long) vaddr;
+ args.size = size;
+
+ r4k_on_each_cpu(local_r4k_flush_kernel_vmap_range, &args);
+}
+
static inline void rm7k_erratum31(void)
{
const unsigned long ic_lsize = 32;
@@ -1403,6 +1436,8 @@
flush_cache_page = r4k_flush_cache_page;
flush_cache_range = r4k_flush_cache_range;
+ __flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
+
flush_cache_sigtramp = r4k_flush_cache_sigtramp;
flush_icache_all = r4k_flush_icache_all;
local_flush_data_cache_page = local_r4k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index d352fad..a43c197c 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -253,6 +253,11 @@
}
}
+static void tx39_flush_kernel_vmap_range(unsigned long vaddr, int size)
+{
+ BUG();
+}
+
static void tx39_dma_cache_wback_inv(unsigned long addr, unsigned long size)
{
unsigned long end;
@@ -394,6 +399,8 @@
flush_icache_range = tx39_flush_icache_range;
local_flush_icache_range = tx39_flush_icache_range;
+ __flush_kernel_vmap_range = tx39_flush_kernel_vmap_range;
+
flush_cache_sigtramp = tx39_flush_cache_sigtramp;
local_flush_data_cache_page = local_tx39_flush_data_cache_page;
flush_data_cache_page = tx39_flush_data_cache_page;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 12af739..829320c 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -35,6 +35,11 @@
void (*__flush_cache_vmap)(void);
void (*__flush_cache_vunmap)(void);
+void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size);
+void (*__invalidate_kernel_vmap_range)(unsigned long vaddr, int size);
+
+EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range);
+
/* MIPS specific cache operations */
void (*flush_cache_sigtramp)(unsigned long addr);
void (*local_flush_data_cache_page)(void * addr);
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 40424af..87bb85d 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -223,8 +223,8 @@
local_irq_restore(flags);
}
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
{
unsigned long flags;
unsigned long old_ctx;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index ba40325..0d394e0 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -337,8 +337,8 @@
EXIT_CRITICAL(flags);
}
-void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
- unsigned long entryhi, unsigned long pagemask)
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask)
{
unsigned long flags;
unsigned long wired;
diff --git a/arch/mips/netlogic/Platform b/arch/mips/netlogic/Platform
index f87c164..b648b48 100644
--- a/arch/mips/netlogic/Platform
+++ b/arch/mips/netlogic/Platform
@@ -5,6 +5,11 @@
cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic
#
+# use mips64 if xlr is not available
+#
+cflags-$(CONFIG_NLM_XLR) += $(call cc-option,-march=xlr,-march=mips64)
+
+#
# NETLOGIC XLR/XLS SoC, Simulator and boards
#
core-$(CONFIG_NLM_XLR) += arch/mips/netlogic/xlr/
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 4828025..cee25dd 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -53,7 +53,7 @@
unsigned long nlm_common_ebase = 0x0;
struct psb_info nlm_prom_info;
-static void nlm_early_serial_setup(void)
+static void __init nlm_early_serial_setup(void)
{
struct uart_port s;
nlm_reg_t *uart_base;
@@ -101,7 +101,7 @@
/* Nothing yet */
}
-static void build_arcs_cmdline(int *argv)
+static void __init build_arcs_cmdline(int *argv)
{
int i, remain, len;
char *arg;
diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c
index d842bce..080284d 100644
--- a/arch/mips/netlogic/xlr/smp.c
+++ b/arch/mips/netlogic/xlr/smp.c
@@ -158,6 +158,10 @@
num_cpus = 1;
for (i = 0; i < NR_CPUS; i++) {
+ /*
+ * BSP is not set in nlm_cpu_ready array, it is only for
+ * ASPs (goto see smpboot.S)
+ */
if (nlm_cpu_ready[i]) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = num_cpus;
@@ -191,7 +195,7 @@
unsigned long secondary_entry_point;
-int nlm_wakeup_secondary_cpus(u32 wakeup_mask)
+int __cpuinit nlm_wakeup_secondary_cpus(u32 wakeup_mask)
{
unsigned int tid, pid, ipi, i, boot_cpu;
void *reset_vec;
diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S
index b8e0744..8cb7889 100644
--- a/arch/mips/netlogic/xlr/smpboot.S
+++ b/arch/mips/netlogic/xlr/smpboot.S
@@ -32,17 +32,19 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/init.h>
+
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
-
-/* Don't jump to linux function from Bootloader stack. Change it
- * here. Kernel might allocate bootloader memory before all the CPUs are
- * brought up (eg: Inode cache region) and we better don't overwrite this
- * memory
+/*
+ * Early code for secondary CPUs. This will get them out of the bootloader
+ * code and into linux. Needed because the bootloader area will be taken
+ * and initialized by linux.
*/
+ __CPUINIT
NESTED(prom_pre_boot_secondary_cpus, 16, sp)
.set mips64
mfc0 t0, $15, 1 # read ebase
@@ -73,7 +75,11 @@
jr t0
nop
END(prom_pre_boot_secondary_cpus)
+ __FINIT
+/*
+ * NMI code, used for CPU wakeup, copied to reset entry
+ */
NESTED(nlm_boot_smp_nmi, 0, sp)
.set push
.set noat
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 4df8799..bb82cbd 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -18,14 +18,13 @@
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
ops-bcm63xx.o
+obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
#
# These are still pretty much in the old state, watch, go blind.
#
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
-obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
-obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
deleted file mode 100644
index e2ddfc4..0000000
--- a/arch/mips/pci/fixup-au1000.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Board specific PCI fixups.
- *
- * Copyright 2001-2003, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-
-extern char irq_tab_alchemy[][5];
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return irq_tab_alchemy[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
deleted file mode 100644
index 9a57c5a..0000000
--- a/arch/mips/pci/ops-au1000.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1xx0 PCI support.
- *
- * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * Support for all devices (greater than 16) added by David Gathright.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(KERN_DEBUG x)
-#else
-#define DBG(x...)
-#endif
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-int (*board_pci_idsel)(unsigned int devsel, int assert);
-
-void mod_wired_entry(int entry, unsigned long entrylo0,
- unsigned long entrylo1, unsigned long entryhi,
- unsigned long pagemask)
-{
- unsigned long old_pagemask;
- unsigned long old_ctx;
-
- /* Save old context and create impossible VPN2 value */
- old_ctx = read_c0_entryhi() & 0xff;
- old_pagemask = read_c0_pagemask();
- write_c0_index(entry);
- write_c0_pagemask(pagemask);
- write_c0_entryhi(entryhi);
- write_c0_entrylo0(entrylo0);
- write_c0_entrylo1(entrylo1);
- tlb_write_indexed();
- write_c0_entryhi(old_ctx);
- write_c0_pagemask(old_pagemask);
-}
-
-static struct vm_struct *pci_cfg_vm;
-static int pci_cfg_wired_entry;
-static unsigned long last_entryLo0, last_entryLo1;
-
-/*
- * We can't ioremap the entire pci config space because it's too large.
- * Nor can we call ioremap dynamically because some device drivers use
- * the PCI config routines from within interrupt handlers and that
- * becomes a problem in get_vm_area(). We use one wired TLB to handle
- * all config accesses for all busses.
- */
-void __init au1x_pci_cfg_init(void)
-{
- /* Reserve a wired entry for PCI config accesses */
- pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
- if (!pci_cfg_vm)
- panic(KERN_ERR "PCI unable to get vm area\n");
- pci_cfg_wired_entry = read_c0_wired();
- add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
- last_entryLo0 = last_entryLo1 = 0xffffffff;
-}
-
-static int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int dev_fn, unsigned char where, u32 *data)
-{
-#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
- unsigned int device = PCI_SLOT(dev_fn);
- unsigned int function = PCI_FUNC(dev_fn);
- unsigned long offset, status;
- unsigned long cfg_base;
- unsigned long flags;
- int error = PCIBIOS_SUCCESSFUL;
- unsigned long entryLo0, entryLo1;
-
- if (device > 19) {
- *data = 0xffffffff;
- return -1;
- }
-
- local_irq_save(flags);
- au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD) & 0xffff)),
- Au1500_PCI_STATCMD);
- au_sync_udelay(1);
-
- /*
- * Allow board vendors to implement their own off-chip IDSEL.
- * If it doesn't succeed, may as well bail out at this point.
- */
- if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
- *data = 0xffffffff;
- local_irq_restore(flags);
- return -1;
- }
-
- /* Setup the config window */
- if (bus->number == 0)
- cfg_base = (1 << device) << 11;
- else
- cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
-
- /* Setup the lower bits of the 36-bit address */
- offset = (function << 8) | (where & ~0x3);
- /* Pick up any address that falls below the page mask */
- offset |= cfg_base & ~PAGE_MASK;
-
- /* Page boundary */
- cfg_base = cfg_base & PAGE_MASK;
-
- /*
- * To improve performance, if the current device is the same as
- * the last device accessed, we don't touch the TLB.
- */
- entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
- entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
- if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
- mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
- (unsigned long)pci_cfg_vm->addr, PM_4K);
- last_entryLo0 = entryLo0;
- last_entryLo1 = entryLo1;
- }
-
- if (access_type == PCI_ACCESS_WRITE)
- au_writel(*data, (int)(pci_cfg_vm->addr + offset));
- else
- *data = au_readl((int)(pci_cfg_vm->addr + offset));
-
- au_sync_udelay(2);
-
- DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
- access_type, bus->number, device, where, *data, offset);
-
- /* Check master abort */
- status = au_readl(Au1500_PCI_STATCMD);
-
- if (status & (1 << 29)) {
- *data = 0xffffffff;
- error = -1;
- DBG("Au1x Master Abort\n");
- } else if ((status >> 28) & 0xf) {
- DBG("PCI ERR detected: device %u, status %lx\n",
- device, (status >> 28) & 0xf);
-
- /* Clear errors */
- au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
-
- *data = 0xffffffff;
- error = -1;
- }
-
- /* Take away the IDSEL. */
- if (board_pci_idsel)
- (void)board_pci_idsel(device, 0);
-
- local_irq_restore(flags);
- return error;
-#endif
-}
-
-static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 *val)
-{
- u32 data;
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
- if (where & 1)
- data >>= 8;
- if (where & 2)
- data >>= 16;
- *val = data & 0xff;
- return ret;
-}
-
-static int read_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 *val)
-{
- u32 data;
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
- if (where & 2)
- data >>= 16;
- *val = data & 0xffff;
- return ret;
-}
-
-static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 *val)
-{
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
- return ret;
-}
-
-static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 val)
-{
- u32 data = 0;
-
- if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 val)
-{
- u32 data = 0;
-
- if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 val)
-{
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- switch (size) {
- case 1: {
- u8 _val;
- int rc = read_config_byte(bus, devfn, where, &_val);
-
- *val = _val;
- return rc;
- }
- case 2: {
- u16 _val;
- int rc = read_config_word(bus, devfn, where, &_val);
-
- *val = _val;
- return rc;
- }
- default:
- return read_config_dword(bus, devfn, where, val);
- }
-}
-
-static int config_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- switch (size) {
- case 1:
- return write_config_byte(bus, devfn, where, (u8) val);
- case 2:
- return write_config_word(bus, devfn, where, (u16) val);
- default:
- return write_config_dword(bus, devfn, where, val);
- }
-}
-
-struct pci_ops au1x_pci_ops = {
- config_read,
- config_write
-};
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
new file mode 100644
index 0000000..4ee5710
--- /dev/null
+++ b/arch/mips/pci/pci-alchemy.c
@@ -0,0 +1,516 @@
+/*
+ * Alchemy PCI host mode support.
+ *
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ * Support for all devices (greater than 16) added by David Gathright.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_DEBUG_PCI
+#define DBG(x...) printk(KERN_DEBUG x)
+#else
+#define DBG(x...) do {} while (0)
+#endif
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+struct alchemy_pci_context {
+ struct pci_controller alchemy_pci_ctrl; /* leave as first member! */
+ void __iomem *regs; /* ctrl base */
+ /* tools for wired entry for config space access */
+ unsigned long last_elo0;
+ unsigned long last_elo1;
+ int wired_entry;
+ struct vm_struct *pci_cfg_vm;
+
+ unsigned long pm[12];
+
+ int (*board_map_irq)(const struct pci_dev *d, u8 slot, u8 pin);
+ int (*board_pci_idsel)(unsigned int devsel, int assert);
+};
+
+/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
+ * in arch/mips/alchemy/common/setup.c
+ */
+static struct resource alchemy_pci_def_memres = {
+ .start = ALCHEMY_PCI_MEMWIN_START,
+ .end = ALCHEMY_PCI_MEMWIN_END,
+ .name = "PCI memory space",
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource alchemy_pci_def_iores = {
+ .start = ALCHEMY_PCI_IOWIN_START,
+ .end = ALCHEMY_PCI_IOWIN_END,
+ .name = "PCI IO space",
+ .flags = IORESOURCE_IO
+};
+
+static void mod_wired_entry(int entry, unsigned long entrylo0,
+ unsigned long entrylo1, unsigned long entryhi,
+ unsigned long pagemask)
+{
+ unsigned long old_pagemask;
+ unsigned long old_ctx;
+
+ /* Save old context and create impossible VPN2 value */
+ old_ctx = read_c0_entryhi() & 0xff;
+ old_pagemask = read_c0_pagemask();
+ write_c0_index(entry);
+ write_c0_pagemask(pagemask);
+ write_c0_entryhi(entryhi);
+ write_c0_entrylo0(entrylo0);
+ write_c0_entrylo1(entrylo1);
+ tlb_write_indexed();
+ write_c0_entryhi(old_ctx);
+ write_c0_pagemask(old_pagemask);
+}
+
+static void alchemy_pci_wired_entry(struct alchemy_pci_context *ctx)
+{
+ ctx->wired_entry = read_c0_wired();
+ add_wired_entry(0, 0, (unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
+ ctx->last_elo0 = ctx->last_elo1 = ~0;
+}
+
+static int config_access(unsigned char access_type, struct pci_bus *bus,
+ unsigned int dev_fn, unsigned char where, u32 *data)
+{
+ struct alchemy_pci_context *ctx = bus->sysdata;
+ unsigned int device = PCI_SLOT(dev_fn);
+ unsigned int function = PCI_FUNC(dev_fn);
+ unsigned long offset, status, cfg_base, flags, entryLo0, entryLo1, r;
+ int error = PCIBIOS_SUCCESSFUL;
+
+ if (device > 19) {
+ *data = 0xffffffff;
+ return -1;
+ }
+
+ /* YAMON on all db1xxx boards wipes the TLB and writes zero to C0_wired
+ * on resume, clearing our wired entry. Unfortunately the ->resume()
+ * callback is called way way way too late (and ->suspend() too early)
+ * to have them destroy and recreate it. Instead just test if c0_wired
+ * is now lower than the index we retrieved before suspending and then
+ * recreate the entry if necessary. Of course this is totally bonkers
+ * and breaks as soon as someone else adds another wired entry somewhere
+ * else. Anyone have any ideas how to handle this better?
+ */
+ if (unlikely(read_c0_wired() < ctx->wired_entry))
+ alchemy_pci_wired_entry(ctx);
+
+ local_irq_save(flags);
+ r = __raw_readl(ctx->regs + PCI_REG_STATCMD) & 0x0000ffff;
+ r |= PCI_STATCMD_STATUS(0x2000);
+ __raw_writel(r, ctx->regs + PCI_REG_STATCMD);
+ wmb();
+
+ /* Allow board vendors to implement their own off-chip IDSEL.
+ * If it doesn't succeed, may as well bail out at this point.
+ */
+ if (ctx->board_pci_idsel(device, 1) == 0) {
+ *data = 0xffffffff;
+ local_irq_restore(flags);
+ return -1;
+ }
+
+ /* Setup the config window */
+ if (bus->number == 0)
+ cfg_base = (1 << device) << 11;
+ else
+ cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
+
+ /* Setup the lower bits of the 36-bit address */
+ offset = (function << 8) | (where & ~0x3);
+ /* Pick up any address that falls below the page mask */
+ offset |= cfg_base & ~PAGE_MASK;
+
+ /* Page boundary */
+ cfg_base = cfg_base & PAGE_MASK;
+
+ /* To improve performance, if the current device is the same as
+ * the last device accessed, we don't touch the TLB.
+ */
+ entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+ entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+ if ((entryLo0 != ctx->last_elo0) || (entryLo1 != ctx->last_elo1)) {
+ mod_wired_entry(ctx->wired_entry, entryLo0, entryLo1,
+ (unsigned long)ctx->pci_cfg_vm->addr, PM_4K);
+ ctx->last_elo0 = entryLo0;
+ ctx->last_elo1 = entryLo1;
+ }
+
+ if (access_type == PCI_ACCESS_WRITE)
+ __raw_writel(*data, ctx->pci_cfg_vm->addr + offset);
+ else
+ *data = __raw_readl(ctx->pci_cfg_vm->addr + offset);
+ wmb();
+
+ DBG("alchemy-pci: cfg access %d bus %u dev %u at %x dat %x conf %lx\n",
+ access_type, bus->number, device, where, *data, offset);
+
+ /* check for errors, master abort */
+ status = __raw_readl(ctx->regs + PCI_REG_STATCMD);
+ if (status & (1 << 29)) {
+ *data = 0xffffffff;
+ error = -1;
+ DBG("alchemy-pci: master abort on cfg access %d bus %d dev %d",
+ access_type, bus->number, device);
+ } else if ((status >> 28) & 0xf) {
+ DBG("alchemy-pci: PCI ERR detected: dev %d, status %lx\n",
+ device, (status >> 28) & 0xf);
+
+ /* clear errors */
+ __raw_writel(status & 0xf000ffff, ctx->regs + PCI_REG_STATCMD);
+
+ *data = 0xffffffff;
+ error = -1;
+ }
+
+ /* Take away the IDSEL. */
+ (void)ctx->board_pci_idsel(device, 0);
+
+ local_irq_restore(flags);
+ return error;
+}
+
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 *val)
+{
+ u32 data;
+ int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+
+ if (where & 1)
+ data >>= 8;
+ if (where & 2)
+ data >>= 16;
+ *val = data & 0xff;
+ return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 *val)
+{
+ u32 data;
+ int ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+
+ if (where & 2)
+ data >>= 16;
+ *val = data & 0xffff;
+ return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 *val)
+{
+ return config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+}
+
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 val)
+{
+ u32 data = 0;
+
+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return -1;
+
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+
+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 val)
+{
+ u32 data = 0;
+
+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return -1;
+
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+
+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 val)
+{
+ return config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val);
+}
+
+static int alchemy_pci_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ switch (size) {
+ case 1: {
+ u8 _val;
+ int rc = read_config_byte(bus, devfn, where, &_val);
+
+ *val = _val;
+ return rc;
+ }
+ case 2: {
+ u16 _val;
+ int rc = read_config_word(bus, devfn, where, &_val);
+
+ *val = _val;
+ return rc;
+ }
+ default:
+ return read_config_dword(bus, devfn, where, val);
+ }
+}
+
+static int alchemy_pci_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ switch (size) {
+ case 1:
+ return write_config_byte(bus, devfn, where, (u8) val);
+ case 2:
+ return write_config_word(bus, devfn, where, (u16) val);
+ default:
+ return write_config_dword(bus, devfn, where, val);
+ }
+}
+
+static struct pci_ops alchemy_pci_ops = {
+ .read = alchemy_pci_read,
+ .write = alchemy_pci_write,
+};
+
+static int alchemy_pci_def_idsel(unsigned int devsel, int assert)
+{
+ return 1; /* success */
+}
+
+static int __devinit alchemy_pci_probe(struct platform_device *pdev)
+{
+ struct alchemy_pci_platdata *pd = pdev->dev.platform_data;
+ struct alchemy_pci_context *ctx;
+ void __iomem *virt_io;
+ unsigned long val;
+ struct resource *r;
+ int ret;
+
+ /* need at least PCI IRQ mapping table */
+ if (!pd) {
+ dev_err(&pdev->dev, "need platform data for PCI setup\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx) {
+ dev_err(&pdev->dev, "no memory for pcictl context\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no pcictl ctrl regs resource\n");
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ if (!request_mem_region(r->start, resource_size(r), pdev->name)) {
+ dev_err(&pdev->dev, "cannot claim pci regs\n");
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ ctx->regs = ioremap_nocache(r->start, resource_size(r));
+ if (!ctx->regs) {
+ dev_err(&pdev->dev, "cannot map pci regs\n");
+ ret = -ENODEV;
+ goto out2;
+ }
+
+ /* map parts of the PCI IO area */
+ /* REVISIT: if this changes with a newer variant (doubt it) make this
+ * a platform resource.
+ */
+ virt_io = ioremap(AU1500_PCI_IO_PHYS_ADDR, 0x00100000);
+ if (!virt_io) {
+ dev_err(&pdev->dev, "cannot remap pci io space\n");
+ ret = -ENODEV;
+ goto out3;
+ }
+ ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io;
+
+#ifdef CONFIG_DMA_NONCOHERENT
+ /* Au1500 revisions older than AD have borked coherent PCI */
+ if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
+ (read_c0_prid() < 0x01030202)) {
+ val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
+ val |= PCI_CONFIG_NC;
+ __raw_writel(val, ctx->regs + PCI_REG_CONFIG);
+ wmb();
+ dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n");
+ }
+#endif
+
+ if (pd->board_map_irq)
+ ctx->board_map_irq = pd->board_map_irq;
+
+ if (pd->board_pci_idsel)
+ ctx->board_pci_idsel = pd->board_pci_idsel;
+ else
+ ctx->board_pci_idsel = alchemy_pci_def_idsel;
+
+ /* fill in relevant pci_controller members */
+ ctx->alchemy_pci_ctrl.pci_ops = &alchemy_pci_ops;
+ ctx->alchemy_pci_ctrl.mem_resource = &alchemy_pci_def_memres;
+ ctx->alchemy_pci_ctrl.io_resource = &alchemy_pci_def_iores;
+
+ /* we can't ioremap the entire pci config space because it's too large,
+ * nor can we dynamically ioremap it because some drivers use the
+ * PCI config routines from within atomic contex and that becomes a
+ * problem in get_vm_area(). Instead we use one wired TLB entry to
+ * handle all config accesses for all busses.
+ */
+ ctx->pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
+ if (!ctx->pci_cfg_vm) {
+ dev_err(&pdev->dev, "unable to get vm area\n");
+ ret = -ENOMEM;
+ goto out4;
+ }
+ ctx->wired_entry = 8192; /* impossibly high value */
+
+ set_io_port_base((unsigned long)ctx->alchemy_pci_ctrl.io_map_base);
+
+ /* board may want to modify bits in the config register, do it now */
+ val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
+ val &= ~pd->pci_cfg_clr;
+ val |= pd->pci_cfg_set;
+ val &= ~PCI_CONFIG_PD; /* clear disable bit */
+ __raw_writel(val, ctx->regs + PCI_REG_CONFIG);
+ wmb();
+
+ platform_set_drvdata(pdev, ctx);
+ register_pci_controller(&ctx->alchemy_pci_ctrl);
+
+ return 0;
+
+out4:
+ iounmap(virt_io);
+out3:
+ iounmap(ctx->regs);
+out2:
+ release_mem_region(r->start, resource_size(r));
+out1:
+ kfree(ctx);
+out:
+ return ret;
+}
+
+
+#ifdef CONFIG_PM
+/* save PCI controller register contents. */
+static int alchemy_pci_suspend(struct device *dev)
+{
+ struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
+
+ ctx->pm[0] = __raw_readl(ctx->regs + PCI_REG_CMEM);
+ ctx->pm[1] = __raw_readl(ctx->regs + PCI_REG_CONFIG) & 0x0009ffff;
+ ctx->pm[2] = __raw_readl(ctx->regs + PCI_REG_B2BMASK_CCH);
+ ctx->pm[3] = __raw_readl(ctx->regs + PCI_REG_B2BBASE0_VID);
+ ctx->pm[4] = __raw_readl(ctx->regs + PCI_REG_B2BBASE1_SID);
+ ctx->pm[5] = __raw_readl(ctx->regs + PCI_REG_MWMASK_DEV);
+ ctx->pm[6] = __raw_readl(ctx->regs + PCI_REG_MWBASE_REV_CCL);
+ ctx->pm[7] = __raw_readl(ctx->regs + PCI_REG_ID);
+ ctx->pm[8] = __raw_readl(ctx->regs + PCI_REG_CLASSREV);
+ ctx->pm[9] = __raw_readl(ctx->regs + PCI_REG_PARAM);
+ ctx->pm[10] = __raw_readl(ctx->regs + PCI_REG_MBAR);
+ ctx->pm[11] = __raw_readl(ctx->regs + PCI_REG_TIMEOUT);
+
+ return 0;
+}
+
+static int alchemy_pci_resume(struct device *dev)
+{
+ struct alchemy_pci_context *ctx = dev_get_drvdata(dev);
+
+ __raw_writel(ctx->pm[0], ctx->regs + PCI_REG_CMEM);
+ __raw_writel(ctx->pm[2], ctx->regs + PCI_REG_B2BMASK_CCH);
+ __raw_writel(ctx->pm[3], ctx->regs + PCI_REG_B2BBASE0_VID);
+ __raw_writel(ctx->pm[4], ctx->regs + PCI_REG_B2BBASE1_SID);
+ __raw_writel(ctx->pm[5], ctx->regs + PCI_REG_MWMASK_DEV);
+ __raw_writel(ctx->pm[6], ctx->regs + PCI_REG_MWBASE_REV_CCL);
+ __raw_writel(ctx->pm[7], ctx->regs + PCI_REG_ID);
+ __raw_writel(ctx->pm[8], ctx->regs + PCI_REG_CLASSREV);
+ __raw_writel(ctx->pm[9], ctx->regs + PCI_REG_PARAM);
+ __raw_writel(ctx->pm[10], ctx->regs + PCI_REG_MBAR);
+ __raw_writel(ctx->pm[11], ctx->regs + PCI_REG_TIMEOUT);
+ wmb();
+ __raw_writel(ctx->pm[1], ctx->regs + PCI_REG_CONFIG);
+ wmb();
+
+ return 0;
+}
+
+static const struct dev_pm_ops alchemy_pci_pmops = {
+ .suspend = alchemy_pci_suspend,
+ .resume = alchemy_pci_resume,
+};
+
+#define ALCHEMY_PCICTL_PM (&alchemy_pci_pmops)
+
+#else
+#define ALCHEMY_PCICTL_PM NULL
+#endif
+
+static struct platform_driver alchemy_pcictl_driver = {
+ .probe = alchemy_pci_probe,
+ .driver = {
+ .name = "alchemy-pci",
+ .owner = THIS_MODULE,
+ .pm = ALCHEMY_PCICTL_PM,
+ },
+};
+
+static int __init alchemy_pci_init(void)
+{
+ /* Au1500/Au1550 have PCI */
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1550:
+ return platform_driver_register(&alchemy_pcictl_driver);
+ }
+ return 0;
+}
+arch_initcall(alchemy_pci_init);
+
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct alchemy_pci_context *ctx = dev->sysdata;
+ if (ctx && ctx->board_map_irq)
+ return ctx->board_map_irq(dev, slot, pin);
+ return -1;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index 0abfbe0..655308a 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -14,6 +14,7 @@
#include <asm/cacheflush.h>
#include <asm/r4kcache.h>
#include <asm/reboot.h>
+#include <asm/smp-ops.h>
#include <asm/time.h>
#include <msp_prom.h>
diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c
index 434d7b1..b7f1d9c 100644
--- a/arch/mips/pmc-sierra/yosemite/py-console.c
+++ b/arch/mips/pmc-sierra/yosemite/py-console.c
@@ -65,15 +65,11 @@
__asm__ __volatile__ (
" .set mips3 \n"
- " .set push \n"
- " .set noreorder \n"
- " .set nomacro \n"
" ld %0, %1 \n"
- " .set pop \n"
" lbu %0, (%0) \n"
" .set mips0 \n"
: "=r" (res)
- : "R" (vaddr));
+ : "m" (vaddr));
write_c0_status(sr);
ssnop_4();
@@ -93,15 +89,11 @@
__asm__ __volatile__ (
" .set mips3 \n"
- " .set push \n"
- " .set noreorder \n"
- " .set nomacro \n"
" ld %0, %1 \n"
- " .set pop \n"
" sb %2, (%0) \n"
" .set mips0 \n"
: "=&r" (tmp)
- : "R" (vaddr), "r" (c));
+ : "m" (vaddr), "r" (c));
write_c0_status(sr);
ssnop_4();
diff --git a/arch/mips/pnx8550/common/prom.c b/arch/mips/pnx8550/common/prom.c
index 32f7009..49639e8 100644
--- a/arch/mips/pnx8550/common/prom.c
+++ b/arch/mips/pnx8550/common/prom.c
@@ -30,7 +30,7 @@
}t_env_var;
-char * prom_getcmdline(void)
+char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index b18b04e..f90dce3 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -337,12 +337,12 @@
.irq_unmask = enable_bridge_irq,
};
-void __devinit register_bridge_irq(unsigned int irq)
+void register_bridge_irq(unsigned int irq)
{
irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
}
-int __devinit request_bridge_irq(struct bridge_controller *bc)
+int request_bridge_irq(struct bridge_controller *bc)
{
int irq = allocate_irqno();
int swlevel, cpu;
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
index fec1320..d7efdbf 100644
--- a/arch/powerpc/mm/gup.c
+++ b/arch/powerpc/mm/gup.c
@@ -16,16 +16,6 @@
#ifdef __HAVE_ARCH_PTE_SPECIAL
-static inline void get_huge_page_tail(struct page *page)
-{
- /*
- * __split_huge_page_refcount() cannot run
- * from under us.
- */
- VM_BUG_ON(atomic_read(&page->_count) < 0);
- atomic_inc(&page->_count);
-}
-
/*
* The performance critical leaf functions are made noinline otherwise gcc
* inlines everything into a single function which results in too much
@@ -57,8 +47,6 @@
put_page(page);
return 0;
}
- if (PageTail(page))
- get_huge_page_tail(page);
pages[*nr] = page;
(*nr)++;
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 0b9a5c1..da5eb38 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -390,7 +390,7 @@
{
unsigned long mask;
unsigned long pte_end;
- struct page *head, *page;
+ struct page *head, *page, *tail;
pte_t pte;
int refs;
@@ -413,6 +413,7 @@
head = pte_page(pte);
page = head + ((addr & (sz-1)) >> PAGE_SHIFT);
+ tail = page;
do {
VM_BUG_ON(compound_head(page) != head);
pages[*nr] = page;
@@ -428,10 +429,20 @@
if (unlikely(pte_val(pte) != pte_val(*ptep))) {
/* Could be optimized better */
- while (*nr) {
- put_page(page);
- (*nr)--;
- }
+ *nr -= refs;
+ while (refs--)
+ put_page(head);
+ return 0;
+ }
+
+ /*
+ * Any tail page need their mapcount reference taken before we
+ * return.
+ */
+ while (refs--) {
+ if (PageTail(tail))
+ get_huge_page_tail(tail);
+ tail++;
}
return 1;
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index c65f75a..22ffccd 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1608,6 +1608,7 @@
return 0;
err:
iounmap(priv->regs_win);
+ release_resource(&port->iores);
err_res:
kfree(priv);
err_priv:
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 6fe874f..481f4f7 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -108,9 +108,7 @@
ret->i_gid = hypfs_info->gid;
ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
if (mode & S_IFDIR)
- ret->i_nlink = 2;
- else
- ret->i_nlink = 1;
+ set_nlink(ret, 2);
}
return ret;
}
@@ -361,7 +359,7 @@
} else if (mode & S_IFDIR) {
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- parent->d_inode->i_nlink++;
+ inc_nlink(parent->d_inode);
} else
BUG();
inode->i_private = data;
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 45b405c..65cb06e 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -52,7 +52,7 @@
unsigned long end, int write, struct page **pages, int *nr)
{
unsigned long mask, result;
- struct page *head, *page;
+ struct page *head, *page, *tail;
int refs;
result = write ? 0 : _SEGMENT_ENTRY_RO;
@@ -64,6 +64,7 @@
refs = 0;
head = pmd_page(pmd);
page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+ tail = page;
do {
VM_BUG_ON(compound_head(page) != head);
pages[*nr] = page;
@@ -81,6 +82,17 @@
*nr -= refs;
while (refs--)
put_page(head);
+ return 0;
+ }
+
+ /*
+ * Any tail page need their mapcount reference taken before we
+ * return.
+ */
+ while (refs--) {
+ if (PageTail(tail))
+ get_huge_page_tail(tail);
+ tail++;
}
return 1;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index ff9177c..5629e20 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -101,10 +101,6 @@
def_bool y
depends on SMP && PREEMPT
-config SYS_SUPPORTS_PM
- bool
- depends on !SMP
-
config ARCH_SUSPEND_POSSIBLE
def_bool n
@@ -649,7 +645,7 @@
a specially reserved region and then later executed after
a crash by kdump/kexec. The crash dump kernel must be compiled
to a memory address not used by the main kernel using
- MEMORY_START.
+ PHYSICAL_START.
For more details see Documentation/kdump/kdump.txt
@@ -660,6 +656,17 @@
Jump between original kernel and kexeced kernel and invoke
code via KEXEC
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
+ default MEMORY_START
+ ---help---
+ This gives the physical address where the kernel is loaded
+ and is ordinarily the same as MEMORY_START.
+
+ Different values are primarily used in the case of kexec on panic
+ where the fail safe kernel needs to run at a different address
+ than the panic-ed kernel.
+
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 99385d0..3fc0f41 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -80,6 +80,7 @@
defaultimage-$(CONFIG_SH_URQUELL) := uImage
defaultimage-$(CONFIG_SH_MIGOR) := uImage
defaultimage-$(CONFIG_SH_AP325RXA) := uImage
+defaultimage-$(CONFIG_SH_SH7757LCR) := uImage
defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c
index 9da92ac..b3ae9d3 100644
--- a/arch/sh/boards/board-espt.c
+++ b/arch/sh/boards/board-espt.c
@@ -13,9 +13,9 @@
#include <linux/interrupt.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
+#include <linux/sh_eth.h>
#include <asm/machvec.h>
#include <asm/sizes.h>
-#include <asm/sh_eth.h>
/* NOR Flash */
static struct mtd_partition espt_nor_flash_partitions[] = {
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
index f968f17..03820c3 100644
--- a/arch/sh/boards/board-secureedge5410.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -41,8 +41,7 @@
printk("SnapGear: EraseConfig init\n");
/* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
- "Erase Config", NULL))
+ if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
irq);
else
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index fa2a208..ec8c84c 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -18,8 +18,8 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/sh_eth.h>
#include <cpu/sh7757.h>
-#include <asm/sh_eth.h>
#include <asm/heartbeat.h>
static struct resource heartbeat_resource = {
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index d362657..7030f4c 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -345,9 +345,10 @@
.width = 640,
.height = 480,
},
- .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
- SOCAM_DATA_ACTIVE_HIGH,
+ .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH,
+ .mbus_type = V4L2_MBUS_PARALLEL,
.set_capture = camera_set_capture,
};
@@ -501,8 +502,7 @@
};
static struct ov772x_camera_info ov7725_info = {
- .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP | \
- OV772X_FLAG_8BIT,
+ .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
};
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 311bceb..724e8b7 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -46,13 +46,11 @@
static struct irqaction cayman_action_smsc = {
.name = "Cayman SMSC Mux",
.handler = cayman_interrupt_smsc,
- .flags = IRQF_DISABLED,
};
static struct irqaction cayman_action_pci2 = {
.name = "Cayman PCI2 Mux",
.handler = cayman_interrupt_pci2,
- .flags = IRQF_DISABLED,
};
static void enable_cayman_irq(struct irq_data *data)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index b24d69d..92ddce4 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -28,13 +28,13 @@
#include <linux/spi/mmc_spi.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/sh_eth.h>
#include <video/sh_mobile_lcdc.h>
#include <sound/sh_fsi.h>
#include <media/sh_mobile_ceu.h>
#include <media/tw9910.h>
#include <media/mt9t112.h>
#include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
@@ -248,6 +248,10 @@
.driver_param = {
.buswait_bwait = 4,
.detection_delay = 5,
+ .d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
+ .d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
+ .d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
+ .d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
},
};
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index b49535c..865d8d6 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -86,7 +86,7 @@
int ret;
ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
- IRQF_DISABLED, MODNAME, NULL);
+ 0, MODNAME, NULL);
if (unlikely(ret < 0)) {
printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
HP680_BTN_IRQ);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 2d4c9c8..e4c8119 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -448,9 +448,7 @@
},
};
-static struct ov772x_camera_info ov7725_info = {
- .flags = OV772X_FLAG_8BIT,
-};
+static struct ov772x_camera_info ov7725_info;
static struct soc_camera_link ov7725_link = {
.power = ov7725_power,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index d007567..b747c0a 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -23,12 +23,12 @@
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <linux/sh_eth.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <sound/sh_fsi.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
-#include <asm/sh_eth.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7724.h>
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index f3d828f..dd036f1 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -17,8 +17,8 @@
#include <linux/mtd/physmap.h>
#include <linux/fb.h>
#include <linux/io.h>
+#include <linux/sh_eth.h>
#include <mach/sh7763rdp.h>
-#include <asm/sh_eth.h>
#include <asm/sh7760fb.h>
/* NOR Flash */
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index ba515d8..e4ea31a 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -19,6 +19,7 @@
CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
CONFIG_ENTRY_OFFSET ?= 0x00001000
+CONFIG_PHYSICAL_START ?= $(CONFIG_MEMORY_START)
suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
@@ -48,7 +49,7 @@
$(Q)$(MAKE) $(build)=$(obj)/romimage $@
KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+ $$[$(CONFIG_PHYSICAL_START) & 0x1fffffff]')
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
@@ -114,4 +115,5 @@
@echo ' Image $@ is ready'
export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y
+ CONFIG_PHYSICAL_START CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET \
+ KERNEL_MEMORY suffix-y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index af7bb58..be9ca7c 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -170,7 +170,7 @@
{
int ret;
- ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, IRQF_DISABLED,
+ ret = request_irq(HW_EVENT_G2_DMA, g2_dma_interrupt, 0,
"g2 DMA handler", &g2_dma_info);
if (unlikely(ret))
return -EINVAL;
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 3cee58e..706a343 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -70,7 +70,6 @@
static struct irqaction pvr2_dma_irq = {
.name = "pvr2 DMA handler",
.handler = pvr2_dma_interrupt,
- .flags = IRQF_DISABLED,
};
static struct dma_ops pvr2_dma_ops = {
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 8272087..a60da6d 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -95,7 +95,7 @@
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
chan->dev_id, chan);
}
@@ -305,7 +305,7 @@
#if defined(CONFIG_SH_DMA_IRQ_MULTI)
IRQF_SHARED,
#else
- IRQF_DISABLED,
+ 0,
#endif
dmae_name[n], (void *)dmae_name[n]);
if (unlikely(i < 0)) {
diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c
index 6ab9c4a..3d66a32 100644
--- a/arch/sh/drivers/dma/dmabrg.c
+++ b/arch/sh/drivers/dma/dmabrg.c
@@ -174,17 +174,17 @@
or = __raw_readl(DMAOR);
__raw_writel(or | DMAOR_BRG | DMAOR_DMEN, DMAOR);
- ret = request_irq(DMABRGI0, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI0, dmabrg_irq, 0,
"DMABRG USB address error", NULL);
if (ret)
goto out0;
- ret = request_irq(DMABRGI1, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI1, dmabrg_irq, 0,
"DMABRG Transfer End", NULL);
if (ret)
goto out1;
- ret = request_irq(DMABRGI2, dmabrg_irq, IRQF_DISABLED,
+ ret = request_irq(DMABRGI2, dmabrg_irq, 0,
"DMABRG Transfer Half", NULL);
if (ret == 0)
return ret;
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index 0bf296c..16c1e72 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -107,13 +107,13 @@
u32 uval;
if (request_irq(IRQ_ERR, pcish5_err_irq,
- IRQF_DISABLED, "PCI Error",NULL) < 0) {
+ 0, "PCI Error",NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
return -EINVAL;
}
if (request_irq(IRQ_SERR, pcish5_serr_irq,
- IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+ 0, "PCI SERR interrupt", NULL) < 0) {
printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
return -EINVAL;
}
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index edb7cca..fa7b978 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -172,7 +172,7 @@
PCI_STATUS_SIG_TARGET_ABORT | \
PCI_STATUS_PARITY, hose->reg_base + PCI_STATUS);
- ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, IRQF_DISABLED,
+ ret = request_irq(hose->serr_irq, sh7780_pci_serr_irq, 0,
"PCI SERR interrupt", hose);
if (unlikely(ret)) {
printk(KERN_ERR "PCI: Failed hooking SERR IRQ\n");
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
index afc2455..637b79b 100644
--- a/arch/sh/drivers/push-switch.c
+++ b/arch/sh/drivers/push-switch.c
@@ -63,7 +63,7 @@
BUG_ON(!psw_info);
ret = request_irq(irq, psw_info->irq_handler,
- IRQF_DISABLED | psw_info->irq_flags,
+ psw_info->irq_flags,
psw_info->name ? psw_info->name : DRV_NAME, pdev);
if (unlikely(ret < 0))
goto err;
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index 822d608..0dca9a5 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -113,6 +113,16 @@
#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
/*
+ * PHYSICAL_OFFSET is the offset in physical memory where the base
+ * of the kernel is loaded.
+ */
+#ifdef CONFIG_PHYSICAL_START
+#define PHYSICAL_OFFSET (CONFIG_PHYSICAL_START - __MEMORY_START)
+#else
+#define PHYSICAL_OFFSET 0
+#endif
+
+/*
* PAGE_OFFSET is the virtual address of the start of kernel address
* space.
*/
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index 3b097b0..19222da 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -113,7 +113,14 @@
/* MSTP32 clocks */
CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP004]),
- CLKDEV_CON_ID("riic", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic0", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic1", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic2", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic3", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic4", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic5", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]),
+ CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]),
CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP113]),
CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP114]),
@@ -121,6 +128,7 @@
CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP111]),
CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP110]),
+ CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
CLKDEV_CON_ID("usb0", &mstp_clks[MSTP102]),
CLKDEV_CON_ID("mmc0", &mstp_clks[MSTP220]),
};
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index de865ca..03f2b55 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -79,7 +79,7 @@
for (i = 0; i < SMP_MSG_NR; i++)
request_irq(104 + i, ipi_interrupt_handler,
- IRQF_DISABLED | IRQF_PERCPU, "IPI", (void *)(long)i);
+ IRQF_PERCPU, "IPI", (void *)(long)i);
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 58bff45..1a0e946 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -211,13 +211,16 @@
}
/*
- * We don't know which RAM region contains kernel data,
- * so we try it repeatedly and let the resource manager
- * test it.
+ * We don't know which RAM region contains kernel data or
+ * the reserved crashkernel region, so try it repeatedly
+ * and let the resource manager test it.
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
+#ifdef CONFIG_KEXEC
+ request_resource(res, &crashk_res);
+#endif
/*
* Also make sure that there is a PMB mapping that covers this
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 38e8628..ecc2d3d 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -11,6 +11,7 @@
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/percpu.h>
+#include <linux/topology.h>
#include <linux/node.h>
#include <linux/nodemask.h>
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 731c10c..c98905f 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -23,7 +23,7 @@
ENTRY(_start)
SECTIONS
{
- . = PAGE_OFFSET + MEMORY_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
+ . = PAGE_OFFSET + MEMORY_OFFSET + PHYSICAL_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
_text = .; /* Text and read-only data */
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 58a93fb3..c9dbace 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -287,6 +287,8 @@
static void __init early_reserve_mem(void)
{
unsigned long start_pfn;
+ u32 zero_base = (u32)__MEMORY_START + (u32)PHYSICAL_OFFSET;
+ u32 start = zero_base + (u32)CONFIG_ZERO_PAGE_OFFSET;
/*
* Partially used pages are not usable - thus
@@ -300,15 +302,13 @@
* this catches the (definitely buggy) case of us accidentally
* initializing the bootmem allocator with an invalid RAM area.
*/
- memblock_reserve(__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET,
- (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) -
- (__MEMORY_START + CONFIG_ZERO_PAGE_OFFSET));
+ memblock_reserve(start, (PFN_PHYS(start_pfn) + PAGE_SIZE - 1) - start);
/*
* Reserve physical pages below CONFIG_ZERO_PAGE_OFFSET.
*/
if (CONFIG_ZERO_PAGE_OFFSET != 0)
- memblock_reserve(__MEMORY_START, CONFIG_ZERO_PAGE_OFFSET);
+ memblock_reserve(zero_base, CONFIG_ZERO_PAGE_OFFSET);
/*
* Handle additional early reservations
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index a986b5d..42c55df 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -56,6 +56,8 @@
put_page(head);
return 0;
}
+ if (head != page)
+ get_huge_page_tail(page);
pages[*nr] = page;
(*nr)++;
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 70dabd1..b9d7c42 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -1,5 +1,4 @@
-
-menu "Character Devices"
+menu "UML Character Devices"
config STDERR_CONSOLE
bool "stderr console"
@@ -105,92 +104,6 @@
this if you expect the UML that you build to be run in environments
which don't have a set of /dev/pty* devices.
-config UNIX98_PTYS
- bool "Unix98 PTY support"
- help
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx for
- masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
- has a number of problems. The GNU C library glibc 2.1 and later,
- however, supports the Unix98 naming standard: in order to acquire a
- pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
- terminal is then made available to the process and the pseudo
- terminal slave can be accessed as /dev/pts/<number>. What was
- traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
- All modern Linux systems use the Unix98 ptys. Say Y unless
- you're on an embedded system and want to conserve memory.
-
-config LEGACY_PTYS
- bool "Legacy (BSD) PTY support"
- default y
- help
- A pseudo terminal (PTY) is a software device consisting of two
- halves: a master and a slave. The slave device behaves identical to
- a physical terminal; the master device is used by a process to
- read data from and write data to the slave, thereby emulating a
- terminal. Typical programs for the master side are telnet servers
- and xterms.
-
- Linux has traditionally used the BSD-like names /dev/ptyxx
- for masters and /dev/ttyxx for slaves of pseudo
- terminals. This scheme has a number of problems, including
- security. This option enables these legacy devices; on most
- systems, it is safe to say N.
-
-config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN)"
- depends on BLOCK
- help
- The raw driver permits block devices to be bound to /dev/raw/rawN.
- Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
- See the raw(8) manpage for more details.
-
- Applications should preferably open the device (eg /dev/hda1)
- with the O_DIRECT flag.
-
-config MAX_RAW_DEVS
- int "Maximum number of RAW devices to support (1-8192)"
- depends on RAW_DRIVER
- default "256"
- help
- The maximum number of RAW devices that are supported.
- Default is 256. Increase this number in case you need lots of
- raw devices.
-
-config LEGACY_PTY_COUNT
- int "Maximum number of legacy PTY in use"
- depends on LEGACY_PTYS
- default "256"
- help
- The maximum number of legacy PTYs that can be used at any one time.
- The default is 256, and should be more than enough. Embedded
- systems may want to reduce this to save memory.
-
- When not in use, each legacy PTY occupies 12 bytes on 32-bit
- architectures and 24 bytes on 64-bit architectures.
-
-config WATCHDOG
- bool "Watchdog Timer Support"
-
-config WATCHDOG_NOWAYOUT
- bool "Disable watchdog shutdown on close"
- depends on WATCHDOG
-
-config SOFT_WATCHDOG
- tristate "Software Watchdog"
- depends on WATCHDOG
-
-config UML_WATCHDOG
- tristate "UML watchdog"
- depends on WATCHDOG
-
config UML_SOUND
tristate "Sound support"
help
@@ -211,29 +124,4 @@
tristate
default UML_SOUND
-#It is selected elsewhere, so kconfig would warn without this.
-config HW_RANDOM
- tristate
- default n
-
-config UML_RANDOM
- tristate "Hardware random number generator"
- help
- This option enables UML's "hardware" random number generator. It
- attaches itself to the host's /dev/random, supplying as much entropy
- as the host has, rather than the small amount the UML gets from its
- own drivers. It registers itself as a standard hardware random number
- generator, major 10, minor 183, and the canonical device name is
- /dev/hwrng.
- The way to make use of this is to install the rng-tools package
- (check your distro, or download from
- http://sourceforge.net/projects/gkernel/). rngd periodically reads
- /dev/hwrng and injects the entropy into /dev/random.
-
-config MMAPPER
- tristate "iomem emulation driver"
- help
- This driver allows a host file to be used as emulated IO memory inside
- UML.
-
endmenu
diff --git a/arch/um/Kconfig.rest b/arch/um/Kconfig.rest
index 0ccad0f..567eb5f 100644
--- a/arch/um/Kconfig.rest
+++ b/arch/um/Kconfig.rest
@@ -2,20 +2,14 @@
source "kernel/Kconfig.freezer"
-source "drivers/block/Kconfig"
-
source "arch/um/Kconfig.char"
-source "drivers/base/Kconfig"
+source "drivers/Kconfig"
source "net/Kconfig"
source "arch/um/Kconfig.net"
-source "drivers/net/Kconfig"
-
-source "drivers/connector/Kconfig"
-
source "fs/Kconfig"
source "security/Kconfig"
@@ -24,19 +18,4 @@
source "lib/Kconfig"
-source "drivers/scsi/Kconfig"
-
-source "drivers/md/Kconfig"
-
-if BROKEN
- source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/leds/Kconfig"
-
-#This is just to shut up some Kconfig warnings, so no prompt.
-config INPUT
- tristate
- default n
-
source "arch/um/Kconfig.debug"
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index b5e675e..70fd690 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -148,5 +148,11 @@
be 1 << order pages. The default is OK unless you're running Valgrind
on UML, in which case, set this to 3.
+config MMAPPER
+ tristate "iomem emulation driver"
+ help
+ This driver allows a host file to be used as emulated IO memory inside
+ UML.
+
config NO_DMA
def_bool y
diff --git a/arch/um/Makefile b/arch/um/Makefile
index c0f712c..7730af6 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -20,15 +20,27 @@
MODE_INCLUDE += -I$(srctree)/$(ARCH_DIR)/include/shared/skas
+HEADER_ARCH := $(SUBARCH)
+
+# Additional ARCH settings for x86
+ifeq ($(SUBARCH),i386)
+ HEADER_ARCH := x86
+endif
+ifeq ($(SUBARCH),x86_64)
+ HEADER_ARCH := x86
+endif
+
+HOST_DIR := arch/$(HEADER_ARCH)
+
include $(srctree)/$(ARCH_DIR)/Makefile-skas
+include $(srctree)/$(HOST_DIR)/Makefile.um
+
+core-y += $(HOST_DIR)/um/
SHARED_HEADERS := $(ARCH_DIR)/include/shared
ARCH_INCLUDE := -I$(srctree)/$(SHARED_HEADERS)
-ARCH_INCLUDE += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)/shared
-ifneq ($(KBUILD_SRC),)
-ARCH_INCLUDE += -I$(SHARED_HEADERS)
-endif
-KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
+ARCH_INCLUDE += -I$(srctree)/$(HOST_DIR)/um/shared
+KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/um
# -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
# named - it's a common symbol in libpcap, so we get a binary which crashes.
@@ -47,14 +59,12 @@
USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -D__KERNEL__,,\
$(patsubst -I%,,$(KBUILD_CFLAGS)))) $(ARCH_INCLUDE) $(MODE_INCLUDE) \
- $(filter -I%,$(CFLAGS)) -D_FILE_OFFSET_BITS=64
-
-include $(srctree)/$(ARCH_DIR)/Makefile-$(SUBARCH)
+ $(filter -I%,$(CFLAGS)) -D_FILE_OFFSET_BITS=64 -idirafter include
#This will adjust *FLAGS accordingly to the platform.
include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS)
-KBUILD_CPPFLAGS += -I$(srctree)/arch/$(HEADER_ARCH)/include
+KBUILD_CPPFLAGS += -I$(srctree)/$(HOST_DIR)/include
# -Derrno=kernel_errno - This turns all kernel references to errno into
# kernel_errno to separate them from the libc errno. This allows -fno-common
@@ -84,10 +94,9 @@
echo ' find in the kernel root.'
endef
-KBUILD_KCONFIG := arch/um/Kconfig.$(HEADER_ARCH)
+KBUILD_KCONFIG := $(HOST_DIR)/um/Kconfig
-archprepare: $(SHARED_HEADERS)/user_constants.h
-archprepare: $(SHARED_HEADERS)/kern_constants.h
+archprepare: include/generated/user_constants.h
LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
@@ -118,9 +127,7 @@
# When cleaning we don't include .config, so we don't include
# TT or skas makefiles and don't clean skas_ptregs.h.
-CLEAN_FILES += linux x.i gmon.out \
- $(SHARED_HEADERS)/user_constants.h \
- $(SHARED_HEADERS)/kern_constants.h
+CLEAN_FILES += linux x.i gmon.out
archclean:
@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
@@ -128,8 +135,8 @@
# Generated files
-$(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s: FORCE
- $(Q)$(MAKE) $(build)=$(ARCH_DIR)/sys-$(SUBARCH) $@
+$(HOST_DIR)/um/user-offsets.s: FORCE
+ $(Q)$(MAKE) $(build)=$(HOST_DIR)/um $@
define filechk_gen-asm-offsets
(set -e; \
@@ -144,11 +151,7 @@
echo ""; )
endef
-$(SHARED_HEADERS)/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
+include/generated/user_constants.h: $(HOST_DIR)/um/user-offsets.s
$(call filechk,gen-asm-offsets)
-$(SHARED_HEADERS)/kern_constants.h:
- $(Q)mkdir -p $(dir $@)
- $(Q)echo '#include "../../../../include/generated/asm-offsets.h"' >$@
-
-export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS HEADER_ARCH DEV_NULL_PATH
+export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS DEV_NULL_PATH
diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64
deleted file mode 100644
index a9cd7e7..0000000
--- a/arch/um/Makefile-x86_64
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright 2003 - 2004 Pathscale, Inc
-# Released under the GPL
-
-core-y += arch/um/sys-x86_64/ arch/x86/crypto/
-START := 0x60000000
-
-_extra_flags_ = -fno-builtin -m64
-
-KBUILD_CFLAGS += $(_extra_flags_)
-
-CHECKFLAGS += -m64 -D__x86_64__
-KBUILD_AFLAGS += -m64
-LDFLAGS += -m elf_x86_64
-KBUILD_CPPFLAGS += -m64
-
-ELF_ARCH := i386:x86-64
-ELF_FORMAT := elf64-x86-64
-HEADER_ARCH := x86
-
-# Not on all 64-bit distros /lib is a symlink to /lib64. PLD is an example.
-
-LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64
-LINK-y += -m64
-
-# Do unit-at-a-time unconditionally on x86_64, following the host
-KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
diff --git a/arch/um/include/shared/chan_kern.h b/arch/um/drivers/chan.h
similarity index 94%
rename from arch/um/include/shared/chan_kern.h
rename to arch/um/drivers/chan.h
index 1e65145..8df0fd9 100644
--- a/arch/um/include/shared/chan_kern.h
+++ b/arch/um/drivers/chan.h
@@ -6,9 +6,9 @@
#ifndef __CHAN_KERN_H__
#define __CHAN_KERN_H__
-#include "linux/tty.h"
-#include "linux/list.h"
-#include "linux/console.h"
+#include <linux/tty.h>
+#include <linux/list.h>
+#include <linux/console.h>
#include "chan_user.h"
#include "line.h"
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index d4191fe..420e2c8 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -6,7 +6,7 @@
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include "chan_kern.h"
+#include "chan.h"
#include "os.h"
#ifdef CONFIG_NOCONFIG_CHAN
@@ -358,11 +358,11 @@
return 0;
}
-static void free_one_chan(struct chan *chan, int delay_free_irq)
+static void free_one_chan(struct chan *chan)
{
list_del(&chan->list);
- close_one_chan(chan, delay_free_irq);
+ close_one_chan(chan, 0);
if (chan->ops->free != NULL)
(*chan->ops->free)(chan->data);
@@ -372,14 +372,14 @@
kfree(chan);
}
-static void free_chan(struct list_head *chans, int delay_free_irq)
+static void free_chan(struct list_head *chans)
{
struct list_head *ele, *next;
struct chan *chan;
list_for_each_safe(ele, next, chans) {
chan = list_entry(ele, struct chan, list);
- free_one_chan(chan, delay_free_irq);
+ free_one_chan(chan);
}
}
@@ -547,7 +547,7 @@
char *in, *out;
if (!list_empty(chans)) {
- free_chan(chans, 0);
+ free_chan(chans);
INIT_LIST_HEAD(chans);
}
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index cfeb3f4..f180813 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -11,10 +11,8 @@
#include <termios.h>
#include <sys/ioctl.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
void generic_close(int fd, void *unused)
{
@@ -283,7 +281,12 @@
return;
pid = tcgetpgrp(fd);
- if (!is_skas_winch(pid, fd, tty) && (pid == -1)) {
+ if (is_skas_winch(pid, fd, tty)) {
+ register_winch_irq(-1, fd, -1, tty, 0);
+ return;
+ }
+
+ if (pid == -1) {
thread = winch_tramp(fd, tty, &thread_fd, &stack);
if (thread < 0)
return;
diff --git a/arch/um/include/shared/chan_user.h b/arch/um/drivers/chan_user.h
similarity index 100%
rename from arch/um/include/shared/chan_user.h
rename to arch/um/drivers/chan_user.h
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index f5701fd..7f2ed0b 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -3,7 +3,6 @@
#include "kern_util.h"
#include "os.h"
-#include "user.h"
#include "um_malloc.h"
static inline void *cow_malloc(int size)
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index f8e85e0..a4fd7bc 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -17,7 +17,6 @@
#include "net_user.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
enum request_type { REQ_NEW_CONTROL };
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index f5a981a..5b81d25 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -9,10 +9,8 @@
#include <errno.h>
#include <termios.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct fd_chan {
int fd;
diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c
index 84dce3f..0345d62 100644
--- a/arch/um/drivers/harddog_user.c
+++ b/arch/um/drivers/harddog_user.c
@@ -7,7 +7,6 @@
#include <unistd.h>
#include <errno.h>
#include "os.h"
-#include "user.h"
struct dog_data {
int stdin;
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 364c8a1..c1cf220 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -7,7 +7,7 @@
#include "linux/kd.h"
#include "linux/sched.h"
#include "linux/slab.h"
-#include "chan_kern.h"
+#include "chan.h"
#include "irq_kern.h"
#include "irq_user.h"
#include "kern_util.h"
diff --git a/arch/um/include/shared/line.h b/arch/um/drivers/line.h
similarity index 100%
rename from arch/um/include/shared/line.h
rename to arch/um/drivers/line.h
diff --git a/arch/um/include/shared/mconsole.h b/arch/um/drivers/mconsole.h
similarity index 100%
rename from arch/um/include/shared/mconsole.h
rename to arch/um/drivers/mconsole.h
diff --git a/arch/um/include/shared/mconsole_kern.h b/arch/um/drivers/mconsole_kern.h
similarity index 100%
rename from arch/um/include/shared/mconsole_kern.h
rename to arch/um/drivers/mconsole_kern.h
diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c
index f8cf4c8..9920982 100644
--- a/arch/um/drivers/mconsole_user.c
+++ b/arch/um/drivers/mconsole_user.c
@@ -10,9 +10,7 @@
#include <sys/socket.h>
#include <sys/uio.h>
#include <sys/un.h>
-#include "kern_constants.h"
#include "mconsole.h"
-#include "user.h"
static struct mconsole_command commands[] = {
/*
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index 5201188..05090c3 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -12,10 +12,8 @@
#include <sys/socket.h>
#include <sys/wait.h>
#include "net_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
int tap_open_common(void *dev, char *gate_addr)
{
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index 5f90358..702a75b 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -9,9 +9,7 @@
#include <asm/types.h>
#include "net_user.h"
#include "pcap_user.h"
-#include "kern_constants.h"
#include "um_malloc.h"
-#include "user.h"
#define PCAP_FD(p) (*(int *)(p))
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index b49bf56..7b010b7 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -10,11 +10,9 @@
#include <unistd.h>
#include <netinet/in.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "port.h"
#include "um_malloc.h"
-#include "user.h"
struct port_chan {
int raw;
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 1113911..cff2b75 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -12,10 +12,8 @@
#include <termios.h>
#include <sys/stat.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct pty_chan {
void (*announce)(char *dev_name, int dev);
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index cbacfc4..932b4d6 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -11,12 +11,10 @@
#include <string.h>
#include <sys/termios.h>
#include <sys/wait.h>
-#include "kern_constants.h"
#include "net_user.h"
#include "os.h"
#include "slip.h"
#include "um_malloc.h"
-#include "user.h"
static int slip_user_init(void *data, void *dev)
{
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index a0ada8f..db4adb6 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -7,11 +7,9 @@
#include <errno.h>
#include <string.h>
#include <sys/wait.h>
-#include "kern_constants.h"
#include "net_user.h"
#include "os.h"
#include "slirp.h"
-#include "user.h"
static int slirp_user_init(void *data, void *dev)
{
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index f1786e6..9d8c20a 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -12,10 +12,8 @@
#include "linux/console.h"
#include "asm/termbits.h"
#include "asm/irq.h"
-#include "line.h"
#include "ssl.h"
-#include "chan_kern.h"
-#include "kern.h"
+#include "chan.h"
#include "init.h"
#include "irq_user.h"
#include "mconsole_kern.h"
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 49266f6..088776f 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -20,8 +20,7 @@
#include "asm/current.h"
#include "asm/irq.h"
#include "stdio_console.h"
-#include "line.h"
-#include "chan_kern.h"
+#include "chan.h"
#include "irq_user.h"
#include "mconsole_kern.h"
#include "init.h"
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index 495858a..a97391f 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -7,10 +7,8 @@
#include <fcntl.h>
#include <termios.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct tty_chan {
char *dev;
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 620f5b7..944453a 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -46,7 +46,6 @@
#include "asm/tlbflush.h"
#include "mem_user.h"
#include "kern_util.h"
-#include "kern.h"
#include "mconsole_kern.h"
#include "init.h"
#include "irq_user.h"
@@ -54,7 +53,6 @@
#include "ubd_user.h"
#include "os.h"
#include "mem.h"
-#include "mem_kern.h"
#include "cow.h"
enum ubd_req { UBD_READ, UBD_WRITE };
@@ -513,8 +511,37 @@
static inline int ubd_file_size(struct ubd *ubd_dev, __u64 *size_out)
{
char *file;
+ int fd;
+ int err;
- file = ubd_dev->cow.file ? ubd_dev->cow.file : ubd_dev->file;
+ __u32 version;
+ __u32 align;
+ char *backing_file;
+ time_t mtime;
+ unsigned long long size;
+ int sector_size;
+ int bitmap_offset;
+
+ if (ubd_dev->file && ubd_dev->cow.file) {
+ file = ubd_dev->cow.file;
+
+ goto out;
+ }
+
+ fd = os_open_file(ubd_dev->file, global_openflags, 0);
+ if (fd < 0)
+ return fd;
+
+ err = read_cow_header(file_reader, &fd, &version, &backing_file, \
+ &mtime, &size, §or_size, &align, &bitmap_offset);
+ os_close_file(fd);
+
+ if(err == -EINVAL)
+ file = ubd_dev->file;
+ else
+ file = backing_file;
+
+out:
return os_file_size(file, size_out);
}
diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c
index b591bb9..007b94d 100644
--- a/arch/um/drivers/ubd_user.c
+++ b/arch/um/drivers/ubd_user.c
@@ -16,7 +16,6 @@
#include <sys/mman.h>
#include <sys/param.h>
#include "asm/types.h"
-#include "user.h"
#include "ubd_user.h"
#include "os.h"
#include "cow.h"
diff --git a/arch/um/include/shared/ubd_user.h b/arch/um/drivers/ubd_user.h
similarity index 100%
rename from arch/um/include/shared/ubd_user.h
rename to arch/um/drivers/ubd_user.h
diff --git a/arch/um/drivers/umcast_user.c b/arch/um/drivers/umcast_user.c
index 59c56fd..010fa2d 100644
--- a/arch/um/drivers/umcast_user.c
+++ b/arch/um/drivers/umcast_user.c
@@ -15,11 +15,9 @@
#include <unistd.h>
#include <errno.h>
#include <netinet/in.h>
-#include "kern_constants.h"
#include "umcast.h"
#include "net_user.h"
#include "um_malloc.h"
-#include "user.h"
static struct sockaddr_in *new_addr(char *addr, unsigned short port)
{
diff --git a/arch/um/drivers/vde_user.c b/arch/um/drivers/vde_user.c
index c5c4325..b8c2867 100644
--- a/arch/um/drivers/vde_user.c
+++ b/arch/um/drivers/vde_user.c
@@ -6,10 +6,8 @@
#include <stddef.h>
#include <errno.h>
#include <libvdeplug.h>
-#include "kern_constants.h"
#include "net_user.h"
#include "um_malloc.h"
-#include "user.h"
#include "vde.h"
static int vde_user_init(void *data, void *dev)
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 2e1de57..969110e 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -11,10 +11,8 @@
#include <string.h>
#include <termios.h>
#include "chan_user.h"
-#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
#include "xterm.h"
struct xterm_chan {
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
new file mode 100644
index 0000000..451f451
--- /dev/null
+++ b/arch/um/include/asm/Kbuild
@@ -0,0 +1,3 @@
+generic-y += bug.h cputime.h device.h emergency-restart.h futex.h hardirq.h
+generic-y += hw_irq.h irq_regs.h kdebug.h percpu.h sections.h topology.h xor.h
+generic-y += ftrace.h
diff --git a/arch/um/include/asm/bug.h b/arch/um/include/asm/bug.h
deleted file mode 100644
index 9e33b86..0000000
--- a/arch/um/include/asm/bug.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_BUG_H
-#define __UM_BUG_H
-
-#include <asm-generic/bug.h>
-
-#endif
diff --git a/arch/um/include/asm/checksum.h b/arch/um/include/asm/checksum.h
deleted file mode 100644
index 5b50136..0000000
--- a/arch/um/include/asm/checksum.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_CHECKSUM_H
-#define __UM_CHECKSUM_H
-
-#include "sysdep/checksum.h"
-
-#endif
diff --git a/arch/um/include/asm/cputime.h b/arch/um/include/asm/cputime.h
deleted file mode 100644
index c84acba..0000000
--- a/arch/um/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_CPUTIME_H
-#define __UM_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __UM_CPUTIME_H */
diff --git a/arch/um/include/asm/device.h b/arch/um/include/asm/device.h
deleted file mode 100644
index d8f9872..0000000
--- a/arch/um/include/asm/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/arch/um/include/asm/emergency-restart.h b/arch/um/include/asm/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/arch/um/include/asm/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/um/include/asm/futex.h b/arch/um/include/asm/futex.h
deleted file mode 100644
index 6a332a9..0000000
--- a/arch/um/include/asm/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/arch/um/include/asm/hardirq.h b/arch/um/include/asm/hardirq.h
deleted file mode 100644
index fb3c05a..0000000
--- a/arch/um/include/asm/hardirq.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/hardirq.h>
diff --git a/arch/um/include/asm/hw_irq.h b/arch/um/include/asm/hw_irq.h
deleted file mode 100644
index 1cf84cf..0000000
--- a/arch/um/include/asm/hw_irq.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _ASM_UM_HW_IRQ_H
-#define _ASM_UM_HW_IRQ_H
-
-#include "asm/irq.h"
-#include "asm/archparam.h"
-
-#endif
diff --git a/arch/um/include/asm/irq_regs.h b/arch/um/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/arch/um/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/um/include/asm/irqflags.h b/arch/um/include/asm/irqflags.h
index 659b9ab..c780d8a 100644
--- a/arch/um/include/asm/irqflags.h
+++ b/arch/um/include/asm/irqflags.h
@@ -1,6 +1,42 @@
#ifndef __UM_IRQFLAGS_H
#define __UM_IRQFLAGS_H
-/* Empty for now */
+extern int get_signals(void);
+extern int set_signals(int enable);
+extern void block_signals(void);
+extern void unblock_signals(void);
+
+static inline unsigned long arch_local_save_flags(void)
+{
+ return get_signals();
+}
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+ set_signals(flags);
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ unblock_signals();
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ block_signals();
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+ flags = arch_local_save_flags();
+ arch_local_irq_disable();
+ return flags;
+}
+
+static inline bool arch_irqs_disabled(void)
+{
+ return arch_local_save_flags() == 0;
+}
#endif
diff --git a/arch/um/include/asm/kdebug.h b/arch/um/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b0..0000000
--- a/arch/um/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/um/include/asm/mmu.h b/arch/um/include/asm/mmu.h
index cf259de..30509b9 100644
--- a/arch/um/include/asm/mmu.h
+++ b/arch/um/include/asm/mmu.h
@@ -1,12 +1,24 @@
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#ifndef __MMU_H
-#define __MMU_H
+#ifndef __ARCH_UM_MMU_H
+#define __ARCH_UM_MMU_H
-#include "um_mmu.h"
+#include "mm_id.h"
+#include <asm/mm_context.h>
+
+typedef struct mm_context {
+ struct mm_id id;
+ struct uml_arch_mm_context arch;
+ struct page **stub_pages;
+} mm_context_t;
+
+extern void __switch_mm(struct mm_id * mm_idp);
+
+/* Avoid tangled inclusion with asm/ldt.h */
+extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
+extern void free_ldt(struct mm_context *mm);
#endif
-
diff --git a/arch/um/include/asm/mmu_context.h b/arch/um/include/asm/mmu_context.h
index 34d8130..591b3d8 100644
--- a/arch/um/include/asm/mmu_context.h
+++ b/arch/um/include/asm/mmu_context.h
@@ -6,15 +6,12 @@
#ifndef __UM_MMU_CONTEXT_H
#define __UM_MMU_CONTEXT_H
-#include "linux/sched.h"
-#include "um_mmu.h"
+#include <linux/sched.h>
+#include <asm/mmu.h>
extern void arch_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
extern void arch_exit_mmap(struct mm_struct *mm);
-#define get_mmu_context(task) do ; while(0)
-#define activate_context(tsk) do ; while(0)
-
#define deactivate_mm(tsk,mm) do { } while (0)
extern void force_flush_all(void);
diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h
index 4cc9b6c..7cfc3ce 100644
--- a/arch/um/include/asm/page.h
+++ b/arch/um/include/asm/page.h
@@ -19,7 +19,7 @@
struct page;
#include <linux/types.h>
-#include <sysdep/vm-flags.h>
+#include <asm/vm-flags.h>
/*
* These are used to make use of C type-checking..
diff --git a/arch/um/include/asm/page_offset.h b/arch/um/include/asm/page_offset.h
deleted file mode 100644
index 1c168df..0000000
--- a/arch/um/include/asm/page_offset.h
+++ /dev/null
@@ -1 +0,0 @@
-#define PAGE_OFFSET_RAW (uml_physmem)
diff --git a/arch/um/include/asm/pda.h b/arch/um/include/asm/pda.h
deleted file mode 100644
index ddcd774..0000000
--- a/arch/um/include/asm/pda.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_PDA_X86_64_H
-#define __UM_PDA_X86_64_H
-
-/* XXX */
-struct foo {
- unsigned int __softirq_pending;
- unsigned int __nmi_count;
-};
-
-extern struct foo me;
-
-#define read_pda(me) (&me)
-
-#endif
-
diff --git a/arch/um/include/asm/percpu.h b/arch/um/include/asm/percpu.h
deleted file mode 100644
index efe7508..0000000
--- a/arch/um/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_PERCPU_H
-#define __UM_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __UM_PERCPU_H */
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 1a7d275..f605d3c 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -23,17 +23,10 @@
#define PT_REGS_IP(r) UPT_IP(&(r)->regs)
#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
-#define PT_REG(r, reg) UPT_REG(&(r)->regs, reg)
-#define PT_REGS_SET(r, reg, val) UPT_SET(&(r)->regs, reg, val)
-
-#define PT_REGS_SET_SYSCALL_RETURN(r, res) \
- UPT_SET_SYSCALL_RETURN(&(r)->regs, res)
#define PT_REGS_RESTART_SYSCALL(r) UPT_RESTART_SYSCALL(&(r)->regs)
#define PT_REGS_SYSCALL_NR(r) UPT_SYSCALL_NR(&(r)->regs)
-#define PT_REGS_SC(r) UPT_SC(&(r)->regs)
-
#define instruction_pointer(regs) PT_REGS_IP(regs)
struct task_struct;
diff --git a/arch/um/include/asm/sections.h b/arch/um/include/asm/sections.h
deleted file mode 100644
index 6b0231e..0000000
--- a/arch/um/include/asm/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _UM_SECTIONS_H
-#define _UM_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/um/include/asm/system.h b/arch/um/include/asm/system.h
deleted file mode 100644
index 68a90ec..0000000
--- a/arch/um/include/asm/system.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __UM_SYSTEM_GENERIC_H
-#define __UM_SYSTEM_GENERIC_H
-
-#include "sysdep/system.h"
-
-extern int get_signals(void);
-extern int set_signals(int enable);
-extern void block_signals(void);
-extern void unblock_signals(void);
-
-static inline unsigned long arch_local_save_flags(void)
-{
- return get_signals();
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
- set_signals(flags);
-}
-
-static inline void arch_local_irq_enable(void)
-{
- unblock_signals();
-}
-
-static inline void arch_local_irq_disable(void)
-{
- block_signals();
-}
-
-static inline unsigned long arch_local_irq_save(void)
-{
- unsigned long flags;
- flags = arch_local_save_flags();
- arch_local_irq_disable();
- return flags;
-}
-
-static inline bool arch_irqs_disabled(void)
-{
- return arch_local_save_flags() == 0;
-}
-
-extern void *_switch_to(void *prev, void *next, void *last);
-#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
-
-#endif
diff --git a/arch/um/include/asm/topology.h b/arch/um/include/asm/topology.h
deleted file mode 100644
index 0905e4f..0000000
--- a/arch/um/include/asm/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_UM_TOPOLOGY_H
-#define _ASM_UM_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif
diff --git a/arch/um/include/asm/uaccess.h b/arch/um/include/asm/uaccess.h
index b9a895d..3f22fbf 100644
--- a/arch/um/include/asm/uaccess.h
+++ b/arch/um/include/asm/uaccess.h
@@ -6,15 +6,15 @@
#ifndef __UM_UACCESS_H
#define __UM_UACCESS_H
-#include <asm/errno.h>
-#include <asm/processor.h>
-
/* thread_info has a mm_segment_t in it, so put the definition up here */
typedef struct {
unsigned long seg;
} mm_segment_t;
-#include "linux/thread_info.h"
+#include <linux/thread_info.h>
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <asm/elf.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -38,7 +38,86 @@
#define segment_eq(a, b) ((a).seg == (b).seg)
-#include "um_uaccess.h"
+#define __under_task_size(addr, size) \
+ (((unsigned long) (addr) < TASK_SIZE) && \
+ (((unsigned long) (addr) + (size)) < TASK_SIZE))
+
+#define __access_ok_vsyscall(type, addr, size) \
+ ((type == VERIFY_READ) && \
+ ((unsigned long) (addr) >= FIXADDR_USER_START) && \
+ ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
+ ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))
+
+#define __addr_range_nowrap(addr, size) \
+ ((unsigned long) (addr) <= ((unsigned long) (addr) + (size)))
+
+#define access_ok(type, addr, size) \
+ (__addr_range_nowrap(addr, size) && \
+ (__under_task_size(addr, size) || \
+ __access_ok_vsyscall(type, addr, size) || \
+ segment_eq(get_fs(), KERNEL_DS)))
+
+extern int copy_from_user(void *to, const void __user *from, int n);
+extern int copy_to_user(void __user *to, const void *from, int n);
+
+/*
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+
+extern int strncpy_from_user(char *dst, const char __user *src, int count);
+
+/*
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern int __clear_user(void __user *mem, int len);
+
+/*
+ * clear_user: - Zero a block of memory in user space.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern int clear_user(void __user *mem, int len);
+
+/*
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ * @n: The maximum valid length
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than @n.
+ */
+extern int strnlen_user(const void __user *str, int len);
#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
diff --git a/arch/um/include/asm/xor.h b/arch/um/include/asm/xor.h
deleted file mode 100644
index a19db3e..0000000
--- a/arch/um/include/asm/xor.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_XOR_H
-#define __UM_XOR_H
-
-#include "asm-generic/xor.h"
-
-#endif
diff --git a/arch/um/include/shared/as-layout.h b/arch/um/include/shared/as-layout.h
index a92b678..896e166 100644
--- a/arch/um/include/shared/as-layout.h
+++ b/arch/um/include/shared/as-layout.h
@@ -6,7 +6,7 @@
#ifndef __START_H__
#define __START_H__
-#include "kern_constants.h"
+#include <generated/asm-offsets.h>
/*
* Stolen from linux/const.h, which can't be directly included since
diff --git a/arch/um/include/shared/common-offsets.h b/arch/um/include/shared/common-offsets.h
index 72009c7..d7fe563 100644
--- a/arch/um/include/shared/common-offsets.h
+++ b/arch/um/include/shared/common-offsets.h
@@ -2,7 +2,6 @@
DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
-OFFSET(HOST_TASK_REGS, task_struct, thread.regs);
OFFSET(HOST_TASK_PID, task_struct, pid);
DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE);
diff --git a/arch/um/include/shared/initrd.h b/arch/um/include/shared/initrd.h
deleted file mode 100644
index 22673bc..0000000
--- a/arch/um/include/shared/initrd.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __INITRD_USER_H__
-#define __INITRD_USER_H__
-
-extern int load_initrd(char *filename, void *buf, int size);
-
-#endif
-
diff --git a/arch/um/include/shared/kern.h b/arch/um/include/shared/kern.h
index 4ce3fc6..6cd0124 100644
--- a/arch/um/include/shared/kern.h
+++ b/arch/um/include/shared/kern.h
@@ -13,28 +13,10 @@
* includes.
*/
-extern int errno;
-
-extern int clone(int (*proc)(void *), void *sp, int flags, void *data);
-extern int sleep(int);
extern int printf(const char *fmt, ...);
-extern char *strerror(int errnum);
-extern char *ptsname(int __fd);
-extern int munmap(void *, int);
extern void *sbrk(int increment);
-extern void *malloc(int size);
-extern void perror(char *err);
-extern int kill(int pid, int sig);
-extern int getuid(void);
-extern int getgid(void);
extern int pause(void);
-extern int write(int, const void *, int);
extern void exit(int);
-extern int close(int);
-extern int read(unsigned int, char *, int);
-extern int pipe(int *);
-extern int sched_yield(void);
-extern int ptrace(int op, int pid, long addr, long data);
#endif
diff --git a/arch/um/include/shared/kern_util.h b/arch/um/include/shared/kern_util.h
index 3c34122..0f14838 100644
--- a/arch/um/include/shared/kern_util.h
+++ b/arch/um/include/shared/kern_util.h
@@ -21,7 +21,6 @@
extern void free_stack(unsigned long stack, int order);
extern int do_signal(void);
-extern void copy_sc(struct uml_pt_regs *regs, void *from);
extern void interrupt_end(void);
extern void relay_signal(int sig, struct uml_pt_regs *regs);
diff --git a/arch/um/include/shared/ldt.h b/arch/um/include/shared/ldt.h
deleted file mode 100644
index a7f999a..0000000
--- a/arch/um/include/shared/ldt.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
- * Licensed under the GPL
- *
- * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
- */
-
-#ifndef __ASM_LDT_H
-#define __ASM_LDT_H
-
-#include <linux/mutex.h>
-#include <sysdep/host_ldt.h>
-
-extern void ldt_host_info(void);
-
-#define LDT_PAGES_MAX \
- ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
-#define LDT_ENTRIES_PER_PAGE \
- (PAGE_SIZE/LDT_ENTRY_SIZE)
-#define LDT_DIRECT_ENTRIES \
- ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
-
-struct ldt_entry {
- __u32 a;
- __u32 b;
-};
-
-typedef struct uml_ldt {
- int entry_count;
- struct mutex lock;
- union {
- struct ldt_entry * pages[LDT_PAGES_MAX];
- struct ldt_entry entries[LDT_DIRECT_ENTRIES];
- } u;
-} uml_ldt_t;
-
-#endif
diff --git a/arch/um/include/shared/mem_kern.h b/arch/um/include/shared/mem_kern.h
deleted file mode 100644
index 69be0fd..0000000
--- a/arch/um/include/shared/mem_kern.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2003 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __MEM_KERN_H__
-#define __MEM_KERN_H__
-
-#include "linux/list.h"
-#include "linux/types.h"
-
-struct remapper {
- struct list_head list;
- int (*proc)(int, unsigned long, int, __u64);
-};
-
-extern void register_remapper(struct remapper *info);
-
-#endif
-
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index 83c7c2e..89b686c1 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -10,7 +10,6 @@
#include "irq_user.h"
#include "longjmp.h"
#include "mm_id.h"
-#include "sysdep/tls.h"
#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
@@ -203,12 +202,6 @@
extern int can_drop_memory(void);
extern void os_flush_stdout(void);
-/* uaccess.c */
-extern unsigned long __do_user_copy(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher,
- void (*op)(void *to, const void *from,
- int n), int *faulted_out);
-
/* execvp.c */
extern int execvp_noalloc(char *buf, const char *file, char *const argv[]);
/* helper.c */
@@ -218,10 +211,6 @@
extern int helper_wait(int pid);
-/* tls.c */
-extern int os_set_thread_area(user_desc_t *info, int pid);
-extern int os_get_thread_area(user_desc_t *info, int pid);
-
/* umid.c */
extern int umid_file_name(char *name, char *buf, int len);
extern int set_umid(char *name);
@@ -231,7 +220,7 @@
extern void timer_init(void);
extern void set_sigstack(void *sig_stack, int size);
extern void remove_sigstack(void);
-extern void set_handler(int sig, void (*handler)(int), int flags, ...);
+extern void set_handler(int sig);
extern int change_sig(int signal, int on);
extern void block_signals(void);
extern void unblock_signals(void);
diff --git a/arch/um/include/shared/process.h b/arch/um/include/shared/process.h
deleted file mode 100644
index bb873a5..0000000
--- a/arch/um/include/shared/process.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2000 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __PROCESS_H__
-#define __PROCESS_H__
-
-#include <signal.h>
-
-/* Copied from linux/compiler-gcc.h since we can't include it directly */
-#define barrier() __asm__ __volatile__("": : :"memory")
-
-extern void sig_handler(int sig, struct sigcontext *sc);
-extern void alarm_handler(int sig, struct sigcontext *sc);
-
-#endif
diff --git a/arch/um/include/shared/ptrace_user.h b/arch/um/include/shared/ptrace_user.h
index 7fd8539..56b2f28 100644
--- a/arch/um/include/shared/ptrace_user.h
+++ b/arch/um/include/shared/ptrace_user.h
@@ -6,7 +6,8 @@
#ifndef __PTRACE_USER_H__
#define __PTRACE_USER_H__
-#include "sysdep/ptrace_user.h"
+#include <sys/ptrace.h>
+#include <sysdep/ptrace_user.h>
extern int ptrace_getregs(long pid, unsigned long *regs_out);
extern int ptrace_setregs(long pid, unsigned long *regs_in);
diff --git a/arch/um/include/shared/skas_ptregs.h b/arch/um/include/shared/skas_ptregs.h
deleted file mode 100644
index 73db19e..0000000
--- a/arch/um/include/shared/skas_ptregs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __SKAS_PT_REGS_
-#define __SKAS_PT_REGS_
-
-#include <user_constants.h>
-
-#endif
diff --git a/arch/um/include/shared/syscall.h b/arch/um/include/shared/syscall.h
deleted file mode 100644
index dda1df9..0000000
--- a/arch/um/include/shared/syscall.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSCALL_USER_H
-#define __SYSCALL_USER_H
-
-extern int record_syscall_start(int syscall);
-extern void record_syscall_end(int index, long result);
-
-#endif
diff --git a/arch/um/include/shared/task.h b/arch/um/include/shared/task.h
deleted file mode 100644
index 3fe726b..0000000
--- a/arch/um/include/shared/task.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __TASK_H
-#define __TASK_H
-
-#include <kern_constants.h>
-
-#define TASK_REGS(task) ((struct uml_pt_regs *) &(((char *) (task))[HOST_TASK_REGS]))
-#define TASK_PID(task) *((int *) &(((char *) (task))[HOST_TASK_PID]))
-
-#endif
diff --git a/arch/um/include/shared/tlb.h b/arch/um/include/shared/tlb.h
deleted file mode 100644
index ecd2265..0000000
--- a/arch/um/include/shared/tlb.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __TLB_H__
-#define __TLB_H__
-
-#include "um_mmu.h"
-
-extern void force_flush_all(void);
-extern int flush_tlb_kernel_range_common(unsigned long start,
- unsigned long end);
-
-#endif
diff --git a/arch/um/include/shared/um_malloc.h b/arch/um/include/shared/um_malloc.h
index c554d70..6395fef 100644
--- a/arch/um/include/shared/um_malloc.h
+++ b/arch/um/include/shared/um_malloc.h
@@ -6,7 +6,7 @@
#ifndef __UM_MALLOC_H__
#define __UM_MALLOC_H__
-#include "kern_constants.h"
+#include <generated/asm-offsets.h>
extern void *uml_kmalloc(int size, int flags);
extern void kfree(const void *ptr);
diff --git a/arch/um/include/shared/um_mmu.h b/arch/um/include/shared/um_mmu.h
deleted file mode 100644
index b1a7e47..0000000
--- a/arch/um/include/shared/um_mmu.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __ARCH_UM_MMU_H
-#define __ARCH_UM_MMU_H
-
-#include "mm_id.h"
-#include "ldt.h"
-
-typedef struct mm_context {
- struct mm_id id;
- struct uml_ldt ldt;
- struct page **stub_pages;
-} mm_context_t;
-
-extern void __switch_mm(struct mm_id * mm_idp);
-
-/* Avoid tangled inclusion with asm/ldt.h */
-extern long init_new_ldt(struct mm_context *to_mm, struct mm_context *from_mm);
-extern void free_ldt(struct mm_context *mm);
-
-#endif
diff --git a/arch/um/include/shared/um_uaccess.h b/arch/um/include/shared/um_uaccess.h
deleted file mode 100644
index 45c0499..0000000
--- a/arch/um/include/shared/um_uaccess.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __ARCH_UM_UACCESS_H
-#define __ARCH_UM_UACCESS_H
-
-#include <asm/elf.h>
-#include <asm/fixmap.h>
-#include "sysdep/archsetjmp.h"
-
-#define __under_task_size(addr, size) \
- (((unsigned long) (addr) < TASK_SIZE) && \
- (((unsigned long) (addr) + (size)) < TASK_SIZE))
-
-#define __access_ok_vsyscall(type, addr, size) \
- ((type == VERIFY_READ) && \
- ((unsigned long) (addr) >= FIXADDR_USER_START) && \
- ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
- ((unsigned long) (addr) + (size) >= (unsigned long)(addr)))
-
-#define __addr_range_nowrap(addr, size) \
- ((unsigned long) (addr) <= ((unsigned long) (addr) + (size)))
-
-#define access_ok(type, addr, size) \
- (__addr_range_nowrap(addr, size) && \
- (__under_task_size(addr, size) || \
- __access_ok_vsyscall(type, addr, size) || \
- segment_eq(get_fs(), KERNEL_DS)))
-
-extern int copy_from_user(void *to, const void __user *from, int n);
-extern int copy_to_user(void __user *to, const void *from, int n);
-
-extern int __do_copy_to_user(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher);
-
-/*
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst: Destination address, in kernel space. This buffer must be at
- * least @count bytes long.
- * @src: Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-
-extern int strncpy_from_user(char *dst, const char __user *src, int count);
-
-/*
- * __clear_user: - Zero a block of memory in user space, with less checking.
- * @to: Destination address, in user space.
- * @n: Number of bytes to zero.
- *
- * Zero a block of memory in user space. Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be cleared.
- * On success, this will be zero.
- */
-extern int __clear_user(void __user *mem, int len);
-
-/*
- * clear_user: - Zero a block of memory in user space.
- * @to: Destination address, in user space.
- * @n: Number of bytes to zero.
- *
- * Zero a block of memory in user space.
- *
- * Returns number of bytes that could not be cleared.
- * On success, this will be zero.
- */
-extern int clear_user(void __user *mem, int len);
-
-/*
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- * @n: The maximum valid length
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-extern int strnlen_user(const void __user *str, int len);
-
-#endif
diff --git a/arch/um/include/shared/user.h b/arch/um/include/shared/user.h
index 293f7c7..4fa82c0 100644
--- a/arch/um/include/shared/user.h
+++ b/arch/um/include/shared/user.h
@@ -6,7 +6,7 @@
#ifndef __USER_H__
#define __USER_H__
-#include "kern_constants.h"
+#include <generated/asm-offsets.h>
/*
* The usual definition - copied here because the kernel provides its own,
@@ -36,10 +36,11 @@
}
#endif
-extern void schedule(void);
extern int in_aton(char *str);
-extern int open_gdb_chan(void);
extern size_t strlcpy(char *, const char *, size_t);
extern size_t strlcat(char *, const char *, size_t);
+/* Copied from linux/compiler-gcc.h since we can't include it directly */
+#define barrier() __asm__ __volatile__("": : :"memory")
+
#endif
diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile
index c4491c1..bc49474 100644
--- a/arch/um/kernel/Makefile
+++ b/arch/um/kernel/Makefile
@@ -11,7 +11,7 @@
obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \
physmem.o process.o ptrace.o reboot.o sigio.o \
- signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o uaccess.o \
+ signal.o smp.o syscall.o sysrq.o time.o tlb.o trap.o \
um_arch.o umid.o skas/
obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 939a4a6..6cade93 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -3,14 +3,15 @@
* Licensed under the GPL
*/
-#include "linux/stddef.h"
-#include "linux/fs.h"
-#include "linux/ptrace.h"
-#include "linux/sched.h"
-#include "linux/slab.h"
-#include "asm/current.h"
-#include "asm/processor.h"
-#include "asm/uaccess.h"
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
#include "as-layout.h"
#include "mem_user.h"
#include "skas.h"
@@ -41,6 +42,7 @@
PT_REGS_IP(regs) = eip;
PT_REGS_SP(regs) = esp;
}
+EXPORT_SYMBOL(start_thread);
static long execve1(const char *file,
const char __user *const __user *argv,
diff --git a/arch/um/kernel/gmon_syms.c b/arch/um/kernel/gmon_syms.c
index 72eccd2..e9bcf247 100644
--- a/arch/um/kernel/gmon_syms.c
+++ b/arch/um/kernel/gmon_syms.c
@@ -7,18 +7,3 @@
extern void __bb_init_func(void *) __attribute__((weak));
EXPORT_SYMBOL(__bb_init_func);
-
-/*
- * This is defined (and referred to in profiling stub code) only by some GCC
- * versions in libgcov.
- *
- * Since SuSE backported the fix, we cannot handle it depending on GCC version.
- * So, unconditionally export it. But also give it a weak declaration, which
- * will be overridden by any other one.
- */
-
-extern void __gcov_init(void *) __attribute__((weak));
-EXPORT_SYMBOL(__gcov_init);
-
-extern void __gcov_merge_add(void *) __attribute__((weak));
-EXPORT_SYMBOL(__gcov_merge_add);
diff --git a/arch/um/kernel/initrd.c b/arch/um/kernel/initrd.c
index d386c75..10cc18f 100644
--- a/arch/um/kernel/initrd.c
+++ b/arch/um/kernel/initrd.c
@@ -7,12 +7,12 @@
#include "linux/bootmem.h"
#include "linux/initrd.h"
#include "asm/types.h"
-#include "initrd.h"
#include "init.h"
#include "os.h"
/* Changed by uml_initrd_setup, which is a setup */
static char *initrd __initdata = NULL;
+static int load_initrd(char *filename, void *buf, int size);
static int __init read_initrd(void)
{
@@ -62,7 +62,7 @@
" name of the file containing the image.\n\n"
);
-int load_initrd(char *filename, void *buf, int size)
+static int load_initrd(char *filename, void *buf, int size)
{
int fd, n;
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 9e485c7..71b8c94 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -258,6 +258,7 @@
ignore_sigio_fd(fd);
}
+EXPORT_SYMBOL(deactivate_fd);
/*
* Called just before shutdown in order to provide a clean exec
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 0ae0dfc..e17bea0 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -3,33 +3,11 @@
* Licensed under the GPL
*/
-#include "linux/module.h"
-#include "linux/syscalls.h"
-#include "asm/tlbflush.h"
-#include "asm/uaccess.h"
-#include "as-layout.h"
-#include "kern_util.h"
-#include "mem_user.h"
+#include <linux/module.h>
#include "os.h"
-EXPORT_SYMBOL(uml_physmem);
EXPORT_SYMBOL(set_signals);
EXPORT_SYMBOL(get_signals);
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(sys_waitpid);
-EXPORT_SYMBOL(flush_tlb_range);
-
-EXPORT_SYMBOL(high_physmem);
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(handle_page_fault);
-EXPORT_SYMBOL(find_iomem);
-
-EXPORT_SYMBOL(strnlen_user);
-EXPORT_SYMBOL(strncpy_from_user);
-EXPORT_SYMBOL(copy_to_user);
-EXPORT_SYMBOL(copy_from_user);
-EXPORT_SYMBOL(clear_user);
-EXPORT_SYMBOL(uml_strdup);
EXPORT_SYMBOL(os_stat_fd);
EXPORT_SYMBOL(os_stat_file);
@@ -57,24 +35,10 @@
EXPORT_SYMBOL(os_accept_connection);
EXPORT_SYMBOL(os_rcv_fd);
EXPORT_SYMBOL(run_helper);
-EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(os_major);
EXPORT_SYMBOL(os_minor);
EXPORT_SYMBOL(os_makedev);
EXPORT_SYMBOL(add_sigio_fd);
EXPORT_SYMBOL(ignore_sigio_fd);
-EXPORT_SYMBOL(deactivate_fd);
EXPORT_SYMBOL(sigio_broken);
-
-#ifdef CONFIG_SMP
-
-/* required for SMP */
-
-extern void __write_lock_failed(rwlock_t *rw);
-EXPORT_SYMBOL(__write_lock_failed);
-
-extern void __read_lock_failed(rwlock_t *rw);
-EXPORT_SYMBOL(__read_lock_failed);
-
-#endif
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 8137ccc..ebb86b2 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -4,6 +4,7 @@
*/
#include <linux/stddef.h>
+#include <linux/module.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/mm.h>
@@ -20,6 +21,7 @@
/* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
unsigned long *empty_zero_page = NULL;
+EXPORT_SYMBOL(empty_zero_page);
/* allocated in paging_init and unchanged thereafter */
static unsigned long *empty_bad_page = NULL;
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index a1a9090..f116db1 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -3,20 +3,22 @@
* Licensed under the GPL
*/
-#include "linux/bootmem.h"
-#include "linux/mm.h"
-#include "linux/pfn.h"
-#include "asm/page.h"
-#include "as-layout.h"
-#include "init.h"
-#include "kern.h"
-#include "mem_user.h"
-#include "os.h"
+#include <linux/module.h>
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/page.h>
+#include <as-layout.h>
+#include <init.h>
+#include <kern.h>
+#include <mem_user.h>
+#include <os.h>
static int physmem_fd = -1;
/* Changed during early boot */
unsigned long high_physmem;
+EXPORT_SYMBOL(high_physmem);
extern unsigned long long physmem_size;
@@ -184,6 +186,7 @@
return 0;
}
+EXPORT_SYMBOL(find_iomem);
static int setup_iomem(void)
{
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 21c1ae7..c533835 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -20,12 +20,12 @@
#include <linux/threads.h>
#include <asm/current.h>
#include <asm/pgtable.h>
+#include <asm/mmu_context.h>
#include <asm/uaccess.h>
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
#include "skas.h"
-#include "tlb.h"
/*
* This is a per-cpu array. A processor only modifies its entry and it only
@@ -78,6 +78,7 @@
¤t->thread.regs, 0, NULL, NULL);
return pid;
}
+EXPORT_SYMBOL(kernel_thread);
static inline void set_current(struct task_struct *task)
{
@@ -286,6 +287,7 @@
{
return kstrdup(string, GFP_KERNEL);
}
+EXPORT_SYMBOL(uml_strdup);
int copy_to_user_proc(void __user *to, void *from, int size)
{
diff --git a/arch/um/kernel/signal.c b/arch/um/kernel/signal.c
index b5c094c..e8b889d 100644
--- a/arch/um/kernel/signal.c
+++ b/arch/um/kernel/signal.c
@@ -11,7 +11,6 @@
#include <asm/unistd.h>
#include "frame_kern.h"
#include "kern_util.h"
-#include <sysdep/sigcontext.h>
EXPORT_SYMBOL(block_signals);
EXPORT_SYMBOL(unblock_signals);
diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c
index 2c8583c..e1fd066 100644
--- a/arch/um/kernel/skas/clone.c
+++ b/arch/um/kernel/skas/clone.c
@@ -8,7 +8,6 @@
#include <asm/unistd.h>
#include <sys/time.h>
#include "as-layout.h"
-#include "kern_constants.h"
#include "ptrace_user.h"
#include "stub-data.h"
#include "sysdep/stub.h"
diff --git a/arch/um/kernel/skas/uaccess.c b/arch/um/kernel/skas/uaccess.c
index 6966342..9fefd92 100644
--- a/arch/um/kernel/skas/uaccess.c
+++ b/arch/um/kernel/skas/uaccess.c
@@ -6,6 +6,7 @@
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/sched.h>
#include <asm/current.h>
#include <asm/page.h>
@@ -149,6 +150,7 @@
buffer_op((unsigned long) from, n, 0, copy_chunk_from_user, &to):
n;
}
+EXPORT_SYMBOL(copy_from_user);
static int copy_chunk_to_user(unsigned long to, int len, void *arg)
{
@@ -170,6 +172,7 @@
buffer_op((unsigned long) to, n, 1, copy_chunk_to_user, &from) :
n;
}
+EXPORT_SYMBOL(copy_to_user);
static int strncpy_chunk_from_user(unsigned long from, int len, void *arg)
{
@@ -204,6 +207,7 @@
return -EFAULT;
return strnlen(dst, count);
}
+EXPORT_SYMBOL(strncpy_from_user);
static int clear_chunk(unsigned long addr, int len, void *unused)
{
@@ -226,6 +230,7 @@
return access_ok(VERIFY_WRITE, mem, len) ?
buffer_op((unsigned long) mem, len, 1, clear_chunk, NULL) : len;
}
+EXPORT_SYMBOL(clear_user);
static int strnlen_chunk(unsigned long str, int len, void *arg)
{
@@ -251,3 +256,4 @@
return count + 1;
return -EFAULT;
}
+EXPORT_SYMBOL(strnlen_user);
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index d175d05..7f3d4d8 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -4,6 +4,7 @@
*/
#include <linux/mm.h>
+#include <linux/module.h>
#include <linux/sched.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
@@ -11,7 +12,6 @@
#include "mem_user.h"
#include "os.h"
#include "skas.h"
-#include "tlb.h"
struct host_vm_change {
struct host_vm_op {
@@ -287,7 +287,7 @@
}
}
-int flush_tlb_kernel_range_common(unsigned long start, unsigned long end)
+static int flush_tlb_kernel_range_common(unsigned long start, unsigned long end)
{
struct mm_struct *mm;
pgd_t *pgd;
@@ -499,6 +499,7 @@
flush_tlb_kernel_range_common(start, end);
else fix_range(vma->vm_mm, start, end, 0);
}
+EXPORT_SYMBOL(flush_tlb_range);
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end)
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index 8c7b882..dafc947 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -6,6 +6,7 @@
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/hardirq.h>
+#include <linux/module.h>
#include <asm/current.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
@@ -14,7 +15,6 @@
#include "kern_util.h"
#include "os.h"
#include "skas.h"
-#include "sysdep/sigcontext.h"
/*
* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by
@@ -112,6 +112,7 @@
pagefault_out_of_memory();
return 0;
}
+EXPORT_SYMBOL(handle_page_fault);
static void show_segv_info(struct uml_pt_regs *regs)
{
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
deleted file mode 100644
index dd33f04..0000000
--- a/arch/um/kernel/uaccess.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-/*
- * These are here rather than tt/uaccess.c because skas mode needs them in
- * order to do SIGBUS recovery when a tmpfs mount runs out of room.
- */
-
-#include <linux/string.h>
-#include "os.h"
-
-static void __do_copy(void *to, const void *from, int n)
-{
- memcpy(to, from, n);
-}
-
-
-int __do_copy_to_user(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher)
-{
- unsigned long fault;
- int faulted;
-
- fault = __do_user_copy(to, from, n, fault_addr, fault_catcher,
- __do_copy, &faulted);
- if (!faulted)
- return 0;
- else
- return n - (fault - (unsigned long) to);
-}
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 8d84250..ba00eae 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -102,6 +102,8 @@
/* Set in linux_main */
unsigned long uml_physmem;
+EXPORT_SYMBOL(uml_physmem);
+
unsigned long uml_reserved; /* Also modified in mem_init */
unsigned long start_vm;
unsigned long end_vm;
diff --git a/arch/um/os-Linux/Makefile b/arch/um/os-Linux/Makefile
index b33f4df..dd76410 100644
--- a/arch/um/os-Linux/Makefile
+++ b/arch/um/os-Linux/Makefile
@@ -4,14 +4,14 @@
#
obj-y = aio.o execvp.o file.o helper.o irq.o main.o mem.o process.o \
- registers.o sigio.o signal.o start_up.o time.o tty.o uaccess.o \
- umid.o tls.o user_syms.o util.o drivers/ sys-$(SUBARCH)/ skas/
+ registers.o sigio.o signal.o start_up.o time.o tty.o \
+ umid.o user_syms.o util.o drivers/ skas/
obj-$(CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA) += elf_aux.o
USER_OBJS := $(user-objs-y) aio.o elf_aux.o execvp.o file.o helper.o irq.o \
main.o mem.o process.o registers.o sigio.o signal.o start_up.o time.o \
- tty.o tls.o uaccess.o umid.o util.o
+ tty.o umid.o util.o
CFLAGS_user_syms.o += -DSUBARCH_$(SUBARCH)
diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c
index 57e3d46..c5d039e 100644
--- a/arch/um/os-Linux/aio.c
+++ b/arch/um/os-Linux/aio.c
@@ -11,10 +11,8 @@
#include <asm/unistd.h>
#include "aio.h"
#include "init.h"
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
-#include "user.h"
struct aio_thread_req {
enum aio_type type;
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index cc72cb2..db3d648 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -13,11 +13,9 @@
#include <sys/socket.h>
#include <sys/wait.h>
#include "etap.h"
-#include "kern_constants.h"
#include "os.h"
#include "net_user.h"
#include "um_malloc.h"
-#include "user.h"
#define MAX_PACKET ETH_MAX_PACKET
diff --git a/arch/um/os-Linux/drivers/tuntap_user.c b/arch/um/os-Linux/drivers/tuntap_user.c
index 2448be0..a2aacff 100644
--- a/arch/um/os-Linux/drivers/tuntap_user.c
+++ b/arch/um/os-Linux/drivers/tuntap_user.c
@@ -13,11 +13,9 @@
#include <sys/socket.h>
#include <sys/wait.h>
#include <sys/uio.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
#include "tuntap.h"
-#include "user.h"
static int tuntap_user_init(void *data, void *dev)
{
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index 9533237..d895271 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -12,7 +12,6 @@
#include "init.h"
#include "elf_user.h"
#include "mem_user.h"
-#include <kern_constants.h>
typedef Elf32_auxv_t elf_auxv_t;
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 140e587..b049a63 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -13,9 +13,7 @@
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/un.h>
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
static void copy_stat(struct uml_stat *dst, const struct stat64 *src)
{
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index feff22d..cf26c4a 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -10,11 +10,9 @@
#include <linux/limits.h>
#include <sys/socket.h>
#include <sys/wait.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
#include "um_malloc.h"
-#include "user.h"
struct helper_data {
void (*pre_exec)(void*);
diff --git a/arch/um/os-Linux/internal.h b/arch/um/os-Linux/internal.h
new file mode 100644
index 0000000..2c3c3ec
--- /dev/null
+++ b/arch/um/os-Linux/internal.h
@@ -0,0 +1 @@
+void alarm_handler(int, mcontext_t *);
diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c
index 0348b97..9a49908 100644
--- a/arch/um/os-Linux/irq.c
+++ b/arch/um/os-Linux/irq.c
@@ -9,11 +9,8 @@
#include <signal.h>
#include <string.h>
#include "irq_user.h"
-#include "kern_constants.h"
#include "os.h"
-#include "process.h"
#include "um_malloc.h"
-#include "user.h"
/*
* Locked by irq_lock in arch/um/kernel/irq.c. Changed by os_create_pollfd
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index 8471b81..7a86dd5 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -12,7 +12,6 @@
#include <sys/resource.h>
#include "as-layout.h"
#include "init.h"
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
#include "um_malloc.h"
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 62878cf..8e421e1 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -14,9 +14,7 @@
#include <sys/mman.h>
#include <sys/param.h>
#include "init.h"
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
/* Modified by which_tmpdir, which is called during early boot */
static char *default_tmpdir = "/tmp";
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 0c45dc8..307f173 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -13,12 +13,9 @@
#include <sys/wait.h>
#include <asm/unistd.h>
#include "init.h"
-#include "kern_constants.h"
#include "longjmp.h"
#include "os.h"
-#include "process.h"
#include "skas_ptrace.h"
-#include "user.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
@@ -237,21 +234,13 @@
void init_new_thread_signals(void)
{
- set_handler(SIGSEGV, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGTRAP, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGFPE, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGILL, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
- set_handler(SIGBUS, (__sighandler_t) sig_handler, SA_ONSTACK,
- SIGUSR1, SIGIO, SIGWINCH, SIGVTALRM, -1);
+ set_handler(SIGSEGV);
+ set_handler(SIGTRAP);
+ set_handler(SIGFPE);
+ set_handler(SIGILL);
+ set_handler(SIGBUS);
signal(SIGHUP, SIG_IGN);
-
- set_handler(SIGIO, (__sighandler_t) sig_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM,
- SIGVTALRM, -1);
+ set_handler(SIGIO);
signal(SIGWINCH, SIG_IGN);
signal(SIGTERM, SIG_DFL);
}
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index 63d299d..3c16121 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -11,14 +11,11 @@
#include <sched.h>
#include <signal.h>
#include <string.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "init.h"
#include "os.h"
-#include "process.h"
#include "sigio.h"
#include "um_malloc.h"
-#include "user.h"
/*
* Protected by sigio_lock(), also used by sigio_cleanup, which is an
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 6ae1807..2d22f1f 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -12,13 +12,7 @@
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
-#include "process.h"
-#include "sysdep/barrier.h"
-#include "sysdep/sigcontext.h"
-#include "user.h"
-
-/* Copied from linux/compiler-gcc.h since we can't include it directly */
-#define barrier() __asm__ __volatile__("": : :"memory")
+#include "sysdep/mcontext.h"
void (*sig_info[NSIG])(int, struct uml_pt_regs *) = {
[SIGTRAP] = relay_signal,
@@ -30,7 +24,7 @@
[SIGIO] = sigio_handler,
[SIGVTALRM] = timer_handler };
-static void sig_handler_common(int sig, struct sigcontext *sc)
+static void sig_handler_common(int sig, mcontext_t *mc)
{
struct uml_pt_regs r;
int save_errno = errno;
@@ -38,8 +32,8 @@
r.is_user = 0;
if (sig == SIGSEGV) {
/* For segfaults, we want the data from the sigcontext. */
- copy_sc(&r, sc);
- GET_FAULTINFO_FROM_SC(r.faultinfo, sc);
+ get_regs_from_mc(&r, mc);
+ GET_FAULTINFO_FROM_MC(r.faultinfo, mc);
}
/* enable signals if sig isn't IRQ signal */
@@ -66,7 +60,7 @@
static int signals_enabled;
static unsigned int signals_pending;
-void sig_handler(int sig, struct sigcontext *sc)
+void sig_handler(int sig, mcontext_t *mc)
{
int enabled;
@@ -78,23 +72,23 @@
block_signals();
- sig_handler_common(sig, sc);
+ sig_handler_common(sig, mc);
set_signals(enabled);
}
-static void real_alarm_handler(struct sigcontext *sc)
+static void real_alarm_handler(mcontext_t *mc)
{
struct uml_pt_regs regs;
- if (sc != NULL)
- copy_sc(®s, sc);
+ if (mc != NULL)
+ get_regs_from_mc(®s, mc);
regs.is_user = 0;
unblock_signals();
timer_handler(SIGVTALRM, ®s);
}
-void alarm_handler(int sig, struct sigcontext *sc)
+void alarm_handler(int sig, mcontext_t *mc)
{
int enabled;
@@ -106,14 +100,13 @@
block_signals();
- real_alarm_handler(sc);
+ real_alarm_handler(mc);
set_signals(enabled);
}
void timer_init(void)
{
- set_handler(SIGVTALRM, (__sighandler_t) alarm_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, -1);
+ set_handler(SIGVTALRM);
}
void set_sigstack(void *sig_stack, int size)
@@ -126,10 +119,23 @@
panic("enabling signal stack failed, errno = %d\n", errno);
}
-static void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+static void (*handlers[_NSIG])(int sig, mcontext_t *mc) = {
+ [SIGSEGV] = sig_handler,
+ [SIGBUS] = sig_handler,
+ [SIGILL] = sig_handler,
+ [SIGFPE] = sig_handler,
+ [SIGTRAP] = sig_handler,
-void handle_signal(int sig, struct sigcontext *sc)
+ [SIGIO] = sig_handler,
+ [SIGWINCH] = sig_handler,
+ [SIGVTALRM] = alarm_handler
+};
+
+
+static void hard_handler(int sig, siginfo_t *info, void *p)
{
+ struct ucontext *uc = p;
+ mcontext_t *mc = &uc->uc_mcontext;
unsigned long pending = 1UL << sig;
do {
@@ -155,7 +161,7 @@
while ((sig = ffs(pending)) != 0){
sig--;
pending &= ~(1 << sig);
- (*handlers[sig])(sig, sc);
+ (*handlers[sig])(sig, mc);
}
/*
@@ -169,28 +175,26 @@
} while (pending);
}
-extern void hard_handler(int sig);
-
-void set_handler(int sig, void (*handler)(int), int flags, ...)
+void set_handler(int sig)
{
struct sigaction action;
- va_list ap;
+ int flags = SA_SIGINFO | SA_ONSTACK;
sigset_t sig_mask;
- int mask;
- handlers[sig] = (void (*)(int, struct sigcontext *)) handler;
- action.sa_handler = hard_handler;
+ action.sa_sigaction = hard_handler;
+ /* block irq ones */
sigemptyset(&action.sa_mask);
-
- va_start(ap, flags);
- while ((mask = va_arg(ap, int)) != -1)
- sigaddset(&action.sa_mask, mask);
- va_end(ap);
+ sigaddset(&action.sa_mask, SIGVTALRM);
+ sigaddset(&action.sa_mask, SIGIO);
+ sigaddset(&action.sa_mask, SIGWINCH);
if (sig == SIGSEGV)
flags |= SA_NODEFER;
+ if (sigismember(&action.sa_mask, sig))
+ flags |= SA_RESTART; /* if it's an irq signal */
+
action.sa_flags = flags;
action.sa_restorer = NULL;
if (sigaction(sig, &action, NULL) < 0)
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index e771398..c0afff7 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -9,7 +9,6 @@
#include <string.h>
#include <sys/mman.h>
#include "init.h"
-#include "kern_constants.h"
#include "as-layout.h"
#include "mm_id.h"
#include "os.h"
@@ -17,7 +16,6 @@
#include "ptrace_user.h"
#include "registers.h"
#include "skas.h"
-#include "user.h"
#include "sysdep/ptrace.h"
#include "sysdep/stub.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index dee0e8c..cd65727 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -9,31 +9,23 @@
#include <errno.h>
#include <string.h>
#include <sys/mman.h>
-#include <sys/ptrace.h>
#include <sys/wait.h>
#include <asm/unistd.h>
#include "as-layout.h"
-#include "chan_user.h"
-#include "kern_constants.h"
+#include "init.h"
#include "kern_util.h"
#include "mem.h"
#include "os.h"
-#include "process.h"
#include "proc_mm.h"
#include "ptrace_user.h"
#include "registers.h"
#include "skas.h"
#include "skas_ptrace.h"
-#include "user.h"
#include "sysdep/stub.h"
int is_skas_winch(int pid, int fd, void *data)
{
- if (pid != getpgrp())
- return 0;
-
- register_winch_irq(-1, fd, -1, data, 0);
- return 1;
+ return pid == getpgrp();
}
static int ptrace_dump_regs(int pid)
@@ -169,7 +161,7 @@
if (!local_using_sysemu)
{
- err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
+ err = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_NR_OFFSET,
__NR_getpid);
if (err < 0) {
printk(UM_KERN_ERR "handle_trap - nullifying syscall "
@@ -257,8 +249,8 @@
set_sigstack((void *) STUB_DATA, UM_KERN_PAGE_SIZE);
sigemptyset(&sa.sa_mask);
- sa.sa_flags = SA_ONSTACK | SA_NODEFER;
- sa.sa_handler = (void *) v;
+ sa.sa_flags = SA_ONSTACK | SA_NODEFER | SA_SIGINFO;
+ sa.sa_sigaction = (void *) v;
sa.sa_restorer = NULL;
if (sigaction(SIGSEGV, &sa, NULL) < 0) {
printk(UM_KERN_ERR "userspace_tramp - setting SIGSEGV "
@@ -661,8 +653,7 @@
{
int n;
- set_handler(SIGWINCH, (__sighandler_t) sig_handler,
- SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGVTALRM, -1);
+ set_handler(SIGWINCH);
/*
* Can't use UML_SETJMP or UML_LONGJMP here because they save
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 02ee9ad..425162e 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -13,12 +13,10 @@
#include <signal.h>
#include <string.h>
#include <sys/mman.h>
-#include <sys/ptrace.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <asm/unistd.h>
#include "init.h"
-#include "kern_constants.h"
#include "os.h"
#include "mem_user.h"
#include "ptrace_user.h"
@@ -225,7 +223,7 @@
goto fail;
}
- n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid());
+ n = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_RET_OFFSET, os_getpid());
if (n < 0) {
non_fatal("check_sysemu : failed to modify system call "
"return");
@@ -261,7 +259,7 @@
"doesn't singlestep");
goto fail;
}
- n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
+ n = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_RET_OFFSET,
os_getpid());
if (n < 0)
fatal_perror("check_sysemu : failed to modify "
@@ -317,10 +315,10 @@
fatal("check_ptrace : expected (SIGTRAP|0x80), "
"got status = %d", status);
- syscall = ptrace(PTRACE_PEEKUSR, pid, PT_SYSCALL_NR_OFFSET,
+ syscall = ptrace(PTRACE_PEEKUSER, pid, PT_SYSCALL_NR_OFFSET,
0);
if (syscall == __NR_getpid) {
- n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
+ n = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_NR_OFFSET,
__NR_getppid);
if (n < 0)
fatal_perror("check_ptrace : failed to modify "
diff --git a/arch/um/os-Linux/sys-i386/signal.c b/arch/um/os-Linux/sys-i386/signal.c
deleted file mode 100644
index f311609..0000000
--- a/arch/um/os-Linux/sys-i386/signal.c
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright (C) 2006 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-
-extern void handle_signal(int sig, struct sigcontext *sc);
-
-void hard_handler(int sig)
-{
- handle_signal(sig, (struct sigcontext *) (&sig + 1));
-}
diff --git a/arch/um/os-Linux/sys-i386/tls.c b/arch/um/os-Linux/sys-i386/tls.c
deleted file mode 100644
index 32ed41e..0000000
--- a/arch/um/os-Linux/sys-i386/tls.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <errno.h>
-#include <linux/unistd.h>
-
-#include <sys/syscall.h>
-#include <unistd.h>
-
-#include "sysdep/tls.h"
-#include "user.h"
-
-/* Checks whether host supports TLS, and sets *tls_min according to the value
- * valid on the host.
- * i386 host have it == 6; x86_64 host have it == 12, for i386 emulation. */
-void check_host_supports_tls(int *supports_tls, int *tls_min) {
- /* Values for x86 and x86_64.*/
- int val[] = {GDT_ENTRY_TLS_MIN_I386, GDT_ENTRY_TLS_MIN_X86_64};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(val); i++) {
- user_desc_t info;
- info.entry_number = val[i];
-
- if (syscall(__NR_get_thread_area, &info) == 0) {
- *tls_min = val[i];
- *supports_tls = 1;
- return;
- } else {
- if (errno == EINVAL)
- continue;
- else if (errno == ENOSYS)
- *supports_tls = 0;
- return;
- }
- }
-
- *supports_tls = 0;
-}
diff --git a/arch/um/os-Linux/sys-x86_64/Makefile b/arch/um/os-Linux/sys-x86_64/Makefile
deleted file mode 100644
index a44a47f..0000000
--- a/arch/um/os-Linux/sys-x86_64/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
-# Licensed under the GPL
-#
-
-obj-y = registers.o prctl.o signal.o task_size.o
-
-USER_OBJS := $(obj-y)
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c
deleted file mode 100644
index 594d97a..0000000
--- a/arch/um/os-Linux/sys-x86_64/registers.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright (C) 2006 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include <sys/ptrace.h>
-#define __FRAME_OFFSETS
-#include <asm/ptrace.h>
-#include "kern_constants.h"
-#include "longjmp.h"
-#include "user.h"
-
-int save_fp_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_GETFPREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-int restore_fp_registers(int pid, unsigned long *fp_regs)
-{
- if (ptrace(PTRACE_SETFPREGS, pid, 0, fp_regs) < 0)
- return -errno;
- return 0;
-}
-
-unsigned long get_thread_reg(int reg, jmp_buf *buf)
-{
- switch (reg) {
- case RIP:
- return buf[0]->__rip;
- case RSP:
- return buf[0]->__rsp;
- case RBP:
- return buf[0]->__rbp;
- default:
- printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
- reg);
- return 0;
- }
-}
-
-int get_fp_registers(int pid, unsigned long *regs)
-{
- return save_fp_registers(pid, regs);
-}
-
-int put_fp_registers(int pid, unsigned long *regs)
-{
- return restore_fp_registers(pid, regs);
-}
diff --git a/arch/um/os-Linux/sys-x86_64/signal.c b/arch/um/os-Linux/sys-x86_64/signal.c
deleted file mode 100644
index 82a3888..0000000
--- a/arch/um/os-Linux/sys-x86_64/signal.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2006 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-
-extern void handle_signal(int sig, struct sigcontext *sc);
-
-void hard_handler(int sig)
-{
- struct ucontext *uc;
- asm("movq %%rdx, %0" : "=r" (uc));
-
- handle_signal(sig, (struct sigcontext *) &uc->uc_mcontext);
-}
diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c
deleted file mode 100644
index 26a0dd1..0000000
--- a/arch/um/os-Linux/sys-x86_64/task_size.c
+++ /dev/null
@@ -1,5 +0,0 @@
-unsigned long os_get_top_address(unsigned long shift)
-{
- /* The old value of CONFIG_TOP_ADDR */
- return 0x7fc0000000;
-}
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index 6e3359d..910499d 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -8,11 +8,9 @@
#include <signal.h>
#include <time.h>
#include <sys/time.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
-#include "process.h"
-#include "user.h"
+#include "internal.h"
int set_interval(void)
{
diff --git a/arch/um/os-Linux/tls.c b/arch/um/os-Linux/tls.c
deleted file mode 100644
index 7327780..0000000
--- a/arch/um/os-Linux/tls.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <errno.h>
-#include <sys/ptrace.h>
-#include "sysdep/tls.h"
-
-/* TLS support - we basically rely on the host's one.*/
-
-#ifndef PTRACE_GET_THREAD_AREA
-#define PTRACE_GET_THREAD_AREA 25
-#endif
-
-#ifndef PTRACE_SET_THREAD_AREA
-#define PTRACE_SET_THREAD_AREA 26
-#endif
-
-int os_set_thread_area(user_desc_t *info, int pid)
-{
- int ret;
-
- ret = ptrace(PTRACE_SET_THREAD_AREA, pid, info->entry_number,
- (unsigned long) info);
- if (ret < 0)
- ret = -errno;
- return ret;
-}
-
-int os_get_thread_area(user_desc_t *info, int pid)
-{
- int ret;
-
- ret = ptrace(PTRACE_GET_THREAD_AREA, pid, info->entry_number,
- (unsigned long) info);
- if (ret < 0)
- ret = -errno;
- return ret;
-}
diff --git a/arch/um/os-Linux/tty.c b/arch/um/os-Linux/tty.c
index b09ff66..dd12b99 100644
--- a/arch/um/os-Linux/tty.c
+++ b/arch/um/os-Linux/tty.c
@@ -7,10 +7,8 @@
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "os.h"
-#include "user.h"
struct grantpt_info {
int fd;
diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c
deleted file mode 100644
index 087ed74..0000000
--- a/arch/um/os-Linux/uaccess.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 2001 Chris Emerson (cemerson@chiark.greenend.org.uk)
- * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <stddef.h>
-#include "longjmp.h"
-
-unsigned long __do_user_copy(void *to, const void *from, int n,
- void **fault_addr, jmp_buf **fault_catcher,
- void (*op)(void *to, const void *from,
- int n), int *faulted_out)
-{
- unsigned long *faddrp = (unsigned long *) fault_addr, ret;
-
- jmp_buf jbuf;
- *fault_catcher = &jbuf;
- if (UML_SETJMP(&jbuf) == 0) {
- (*op)(to, from, n);
- ret = 0;
- *faulted_out = 0;
- }
- else {
- ret = *faddrp;
- *faulted_out = 1;
- }
- *fault_addr = NULL;
- *fault_catcher = NULL;
- return ret;
-}
-
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index a27defb..4832eb5 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -13,9 +13,7 @@
#include <unistd.h>
#include <sys/stat.h>
#include "init.h"
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
#define UML_DIR "~/.uml/"
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index 5803b18..9e3b43b 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -13,9 +13,7 @@
#include <wait.h>
#include <sys/mman.h>
#include <sys/utsname.h>
-#include "kern_constants.h"
#include "os.h"
-#include "user.h"
void stack_protections(unsigned long address)
{
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 61107b6..2eb2843 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -8,7 +8,7 @@
USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
$(USER_OBJS:.o=.%): \
- c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(basetarget).o)
+ c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) -include user.h $(CFLAGS_$(basetarget).o)
$(USER_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
-Dunix -D__unix__ -D__$(SUBARCH)__ $(CF)
@@ -25,8 +25,3 @@
define unprofile
$(patsubst -pg,,$(patsubst -fprofile-arcs -ftest-coverage,,$(1)))
endef
-
-ifdef subarch-obj-y
-obj-y += subarch.o
-subarch-y = $(addprefix ../../$(HEADER_ARCH)/,$(subarch-obj-y))
-endif
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
deleted file mode 100644
index 3923cfb..0000000
--- a/arch/um/sys-i386/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
-#
-
-obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
- ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \
- sys_call_table.o tls.o atomic64_cx8_32.o mem.o
-
-obj-$(CONFIG_BINFMT_ELF) += elfcore.o
-
-subarch-obj-y = lib/string_32.o
-subarch-obj-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += lib/rwsem.o
-subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem_32.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module.o
-
-USER_OBJS := bugs.o ptrace_user.o fault.o
-
-USER_OBJS += user-offsets.s
-extra-y += user-offsets.s
-
-UNPROFILE_OBJS := stub_segv.o
-CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/sys-i386/asm/elf.h b/arch/um/sys-i386/asm/elf.h
deleted file mode 100644
index 4230555..0000000
--- a/arch/um/sys-i386/asm/elf.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-#ifndef __UM_ELF_I386_H
-#define __UM_ELF_I386_H
-
-#include <asm/user.h>
-#include "skas.h"
-
-#define R_386_NONE 0
-#define R_386_32 1
-#define R_386_PC32 2
-#define R_386_GOT32 3
-#define R_386_PLT32 4
-#define R_386_COPY 5
-#define R_386_GLOB_DAT 6
-#define R_386_JMP_SLOT 7
-#define R_386_RELATIVE 8
-#define R_386_GOTOFF 9
-#define R_386_GOTPC 10
-#define R_386_NUM 11
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
-
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_386
-
-#define ELF_PLAT_INIT(regs, load_addr) do { \
- PT_REGS_EBX(regs) = 0; \
- PT_REGS_ECX(regs) = 0; \
- PT_REGS_EDX(regs) = 0; \
- PT_REGS_ESI(regs) = 0; \
- PT_REGS_EDI(regs) = 0; \
- PT_REGS_EBP(regs) = 0; \
- PT_REGS_EAX(regs) = 0; \
-} while (0)
-
-#define ELF_EXEC_PAGESIZE 4096
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-/* Shamelessly stolen from include/asm-i386/elf.h */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
- pr_reg[0] = PT_REGS_EBX(regs); \
- pr_reg[1] = PT_REGS_ECX(regs); \
- pr_reg[2] = PT_REGS_EDX(regs); \
- pr_reg[3] = PT_REGS_ESI(regs); \
- pr_reg[4] = PT_REGS_EDI(regs); \
- pr_reg[5] = PT_REGS_EBP(regs); \
- pr_reg[6] = PT_REGS_EAX(regs); \
- pr_reg[7] = PT_REGS_DS(regs); \
- pr_reg[8] = PT_REGS_ES(regs); \
- /* fake once used fs and gs selectors? */ \
- pr_reg[9] = PT_REGS_DS(regs); \
- pr_reg[10] = PT_REGS_DS(regs); \
- pr_reg[11] = PT_REGS_SYSCALL_NR(regs); \
- pr_reg[12] = PT_REGS_IP(regs); \
- pr_reg[13] = PT_REGS_CS(regs); \
- pr_reg[14] = PT_REGS_EFLAGS(regs); \
- pr_reg[15] = PT_REGS_SP(regs); \
- pr_reg[16] = PT_REGS_SS(regs); \
-} while (0);
-
-#define task_pt_regs(t) (&(t)->thread.regs)
-
-struct task_struct;
-
-extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
-
-#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
-
-extern long elf_aux_hwcap;
-#define ELF_HWCAP (elf_aux_hwcap)
-
-extern char * elf_aux_platform;
-#define ELF_PLATFORM (elf_aux_platform)
-
-#define SET_PERSONALITY(ex) do { } while (0)
-
-extern unsigned long vsyscall_ehdr;
-extern unsigned long vsyscall_end;
-extern unsigned long __kernel_vsyscall;
-
-#define VSYSCALL_BASE vsyscall_ehdr
-#define VSYSCALL_END vsyscall_end
-
-/*
- * This is the range that is readable by user mode, and things
- * acting like user mode such as get_user_pages.
- */
-#define FIXADDR_USER_START VSYSCALL_BASE
-#define FIXADDR_USER_END VSYSCALL_END
-
-#define __HAVE_ARCH_GATE_AREA 1
-
-/*
- * Architecture-neutral AT_ values in 0-17, leave some room
- * for more of them, start the x86-specific ones at 32.
- */
-#define AT_SYSINFO 32
-#define AT_SYSINFO_EHDR 33
-
-#define ARCH_DLINFO \
-do { \
- if ( vsyscall_ehdr ) { \
- NEW_AUX_ENT(AT_SYSINFO, __kernel_vsyscall); \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, vsyscall_ehdr); \
- } \
-} while (0)
-
-#endif
diff --git a/arch/um/sys-i386/asm/module.h b/arch/um/sys-i386/asm/module.h
deleted file mode 100644
index 5ead4a0..0000000
--- a/arch/um/sys-i386/asm/module.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __UM_MODULE_I386_H
-#define __UM_MODULE_I386_H
-
-/* UML is simple */
-struct mod_arch_specific
-{
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif
diff --git a/arch/um/sys-i386/atomic64_cx8_32.S b/arch/um/sys-i386/atomic64_cx8_32.S
deleted file mode 100644
index 1e901d3..0000000
--- a/arch/um/sys-i386/atomic64_cx8_32.S
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * atomic64_t for 586+
- *
- * Copied from arch/x86/lib/atomic64_cx8_32.S
- *
- * Copyright © 2010 Luca Barbieri
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/alternative-asm.h>
-#include <asm/dwarf2.h>
-
-.macro SAVE reg
- pushl_cfi %\reg
- CFI_REL_OFFSET \reg, 0
-.endm
-
-.macro RESTORE reg
- popl_cfi %\reg
- CFI_RESTORE \reg
-.endm
-
-.macro read64 reg
- movl %ebx, %eax
- movl %ecx, %edx
-/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */
- LOCK_PREFIX
- cmpxchg8b (\reg)
-.endm
-
-ENTRY(atomic64_read_cx8)
- CFI_STARTPROC
-
- read64 %ecx
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_read_cx8)
-
-ENTRY(atomic64_set_cx8)
- CFI_STARTPROC
-
-1:
-/* we don't need LOCK_PREFIX since aligned 64-bit writes
- * are atomic on 586 and newer */
- cmpxchg8b (%esi)
- jne 1b
-
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_set_cx8)
-
-ENTRY(atomic64_xchg_cx8)
- CFI_STARTPROC
-
- movl %ebx, %eax
- movl %ecx, %edx
-1:
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_xchg_cx8)
-
-.macro addsub_return func ins insc
-ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- SAVE ebp
- SAVE ebx
- SAVE esi
- SAVE edi
-
- movl %eax, %esi
- movl %edx, %edi
- movl %ecx, %ebp
-
- read64 %ebp
-1:
- movl %eax, %ebx
- movl %edx, %ecx
- \ins\()l %esi, %ebx
- \insc\()l %edi, %ecx
- LOCK_PREFIX
- cmpxchg8b (%ebp)
- jne 1b
-
-10:
- movl %ebx, %eax
- movl %ecx, %edx
- RESTORE edi
- RESTORE esi
- RESTORE ebx
- RESTORE ebp
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_\func\()_return_cx8)
-.endm
-
-addsub_return add add adc
-addsub_return sub sub sbb
-
-.macro incdec_return func ins insc
-ENTRY(atomic64_\func\()_return_cx8)
- CFI_STARTPROC
- SAVE ebx
-
- read64 %esi
-1:
- movl %eax, %ebx
- movl %edx, %ecx
- \ins\()l $1, %ebx
- \insc\()l $0, %ecx
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
-10:
- movl %ebx, %eax
- movl %ecx, %edx
- RESTORE ebx
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_\func\()_return_cx8)
-.endm
-
-incdec_return inc add adc
-incdec_return dec sub sbb
-
-ENTRY(atomic64_dec_if_positive_cx8)
- CFI_STARTPROC
- SAVE ebx
-
- read64 %esi
-1:
- movl %eax, %ebx
- movl %edx, %ecx
- subl $1, %ebx
- sbb $0, %ecx
- js 2f
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
-2:
- movl %ebx, %eax
- movl %ecx, %edx
- RESTORE ebx
- ret
- CFI_ENDPROC
-ENDPROC(atomic64_dec_if_positive_cx8)
-
-ENTRY(atomic64_add_unless_cx8)
- CFI_STARTPROC
- SAVE ebp
- SAVE ebx
-/* these just push these two parameters on the stack */
- SAVE edi
- SAVE esi
-
- movl %ecx, %ebp
- movl %eax, %esi
- movl %edx, %edi
-
- read64 %ebp
-1:
- cmpl %eax, 0(%esp)
- je 4f
-2:
- movl %eax, %ebx
- movl %edx, %ecx
- addl %esi, %ebx
- adcl %edi, %ecx
- LOCK_PREFIX
- cmpxchg8b (%ebp)
- jne 1b
-
- movl $1, %eax
-3:
- addl $8, %esp
- CFI_ADJUST_CFA_OFFSET -8
- RESTORE ebx
- RESTORE ebp
- ret
-4:
- cmpl %edx, 4(%esp)
- jne 2b
- xorl %eax, %eax
- jmp 3b
- CFI_ENDPROC
-ENDPROC(atomic64_add_unless_cx8)
-
-ENTRY(atomic64_inc_not_zero_cx8)
- CFI_STARTPROC
- SAVE ebx
-
- read64 %esi
-1:
- testl %eax, %eax
- je 4f
-2:
- movl %eax, %ebx
- movl %edx, %ecx
- addl $1, %ebx
- adcl $0, %ecx
- LOCK_PREFIX
- cmpxchg8b (%esi)
- jne 1b
-
- movl $1, %eax
-3:
- RESTORE ebx
- ret
-4:
- testl %edx, %edx
- jne 2b
- jmp 3b
- CFI_ENDPROC
-ENDPROC(atomic64_inc_not_zero_cx8)
diff --git a/arch/um/sys-i386/bug.c b/arch/um/sys-i386/bug.c
deleted file mode 100644
index 8d4f273..0000000
--- a/arch/um/sys-i386/bug.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2006 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL V2
- */
-
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-/* Mostly copied from i386/x86_86 - eliminated the eip < PAGE_OFFSET because
- * that's not relevant in skas mode.
- */
-
-int is_valid_bugaddr(unsigned long eip)
-{
- unsigned short ud2;
-
- if (probe_kernel_address((unsigned short __user *)eip, ud2))
- return 0;
-
- return ud2 == 0x0b0f;
-}
diff --git a/arch/um/sys-i386/ksyms.c b/arch/um/sys-i386/ksyms.c
deleted file mode 100644
index bfbefd3..0000000
--- a/arch/um/sys-i386/ksyms.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "linux/module.h"
-#include "asm/checksum.h"
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-i386/shared/sysdep/barrier.h b/arch/um/sys-i386/shared/sysdep/barrier.h
deleted file mode 100644
index b58d52c..0000000
--- a/arch/um/sys-i386/shared/sysdep/barrier.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __SYSDEP_I386_BARRIER_H
-#define __SYSDEP_I386_BARRIER_H
-
-/* Copied from include/asm-i386 for use by userspace. i386 has the option
- * of using mfence, but I'm just using this, which works everywhere, for now.
- */
-#define mb() asm volatile("lock; addl $0,0(%esp)")
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/host_ldt.h b/arch/um/sys-i386/shared/sysdep/host_ldt.h
deleted file mode 100644
index 0953cc4..0000000
--- a/arch/um/sys-i386/shared/sysdep/host_ldt.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef __ASM_HOST_LDT_I386_H
-#define __ASM_HOST_LDT_I386_H
-
-#include <asm/ldt.h>
-
-/*
- * macros stolen from include/asm-i386/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 )
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h
deleted file mode 100644
index c398a50..0000000
--- a/arch/um/sys-i386/shared/sysdep/ptrace.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_I386_PTRACE_H
-#define __SYSDEP_I386_PTRACE_H
-
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-
-static inline void update_debugregs(int seq) {}
-
-/* syscall emulation path in ptrace */
-
-#ifndef PTRACE_SYSEMU
-#define PTRACE_SYSEMU 31
-#endif
-
-void set_using_sysemu(int value);
-int get_using_sysemu(void);
-extern int sysemu_supported;
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_EAX(r) ((r)[HOST_EAX])
-#define REGS_EBX(r) ((r)[HOST_EBX])
-#define REGS_ECX(r) ((r)[HOST_ECX])
-#define REGS_EDX(r) ((r)[HOST_EDX])
-#define REGS_ESI(r) ((r)[HOST_ESI])
-#define REGS_EDI(r) ((r)[HOST_EDI])
-#define REGS_EBP(r) ((r)[HOST_EBP])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_SS(r) ((r)[HOST_SS])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#ifndef PTRACE_SYSEMU_SINGLESTEP
-#define PTRACE_SYSEMU_SINGLESTEP 32
-#endif
-
-struct uml_pt_regs {
- unsigned long gp[MAX_REG_NR];
- unsigned long fp[HOST_FPX_SIZE];
- struct faultinfo faultinfo;
- long syscall;
- int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_EAX(r) REGS_EAX((r)->gp)
-#define UPT_EBX(r) REGS_EBX((r)->gp)
-#define UPT_ECX(r) REGS_ECX((r)->gp)
-#define UPT_EDX(r) REGS_EDX((r)->gp)
-#define UPT_ESI(r) REGS_ESI((r)->gp)
-#define UPT_EDI(r) REGS_EDI((r)->gp)
-#define UPT_EBP(r) REGS_EBP((r)->gp)
-#define UPT_ORIG_EAX(r) ((r)->syscall)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-
-#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
-#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
-#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
-#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
-#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-struct syscall_args {
- unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
- { .args = { UPT_SYSCALL_ARG1(r), \
- UPT_SYSCALL_ARG2(r), \
- UPT_SYSCALL_ARG3(r), \
- UPT_SYSCALL_ARG4(r), \
- UPT_SYSCALL_ARG5(r), \
- UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
- ({ unsigned long val; \
- switch(reg){ \
- case EIP: val = UPT_IP(regs); break; \
- case UESP: val = UPT_SP(regs); break; \
- case EAX: val = UPT_EAX(regs); break; \
- case EBX: val = UPT_EBX(regs); break; \
- case ECX: val = UPT_ECX(regs); break; \
- case EDX: val = UPT_EDX(regs); break; \
- case ESI: val = UPT_ESI(regs); break; \
- case EDI: val = UPT_EDI(regs); break; \
- case EBP: val = UPT_EBP(regs); break; \
- case ORIG_EAX: val = UPT_ORIG_EAX(regs); break; \
- case CS: val = UPT_CS(regs); break; \
- case SS: val = UPT_SS(regs); break; \
- case DS: val = UPT_DS(regs); break; \
- case ES: val = UPT_ES(regs); break; \
- case FS: val = UPT_FS(regs); break; \
- case GS: val = UPT_GS(regs); break; \
- case EFL: val = UPT_EFLAGS(regs); break; \
- default : \
- panic("Bad register in UPT_REG : %d\n", reg); \
- val = -1; \
- } \
- val; \
- })
-
-#define UPT_SET(regs, reg, val) \
- do { \
- switch(reg){ \
- case EIP: UPT_IP(regs) = val; break; \
- case UESP: UPT_SP(regs) = val; break; \
- case EAX: UPT_EAX(regs) = val; break; \
- case EBX: UPT_EBX(regs) = val; break; \
- case ECX: UPT_ECX(regs) = val; break; \
- case EDX: UPT_EDX(regs) = val; break; \
- case ESI: UPT_ESI(regs) = val; break; \
- case EDI: UPT_EDI(regs) = val; break; \
- case EBP: UPT_EBP(regs) = val; break; \
- case ORIG_EAX: UPT_ORIG_EAX(regs) = val; break; \
- case CS: UPT_CS(regs) = val; break; \
- case SS: UPT_SS(regs) = val; break; \
- case DS: UPT_DS(regs) = val; break; \
- case ES: UPT_ES(regs) = val; break; \
- case FS: UPT_FS(regs) = val; break; \
- case GS: UPT_GS(regs) = val; break; \
- case EFL: UPT_EFLAGS(regs) = val; break; \
- default : \
- panic("Bad register in UPT_SET : %d\n", reg); \
- break; \
- } \
- } while (0)
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
- REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
-#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
-#define UPT_SYSCALL_RET(r) UPT_EAX(r)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-extern void arch_init_registers(int pid);
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace_user.h b/arch/um/sys-i386/shared/sysdep/ptrace_user.h
deleted file mode 100644
index ef56247..0000000
--- a/arch/um/sys-i386/shared/sysdep/ptrace_user.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_I386_PTRACE_USER_H__
-#define __SYSDEP_I386_PTRACE_USER_H__
-
-#include <sys/ptrace.h>
-#include <linux/ptrace.h>
-#include <asm/ptrace.h>
-#include "user_constants.h"
-
-#define PT_OFFSET(r) ((r) * sizeof(long))
-
-#define PT_SYSCALL_NR(regs) ((regs)[ORIG_EAX])
-#define PT_SYSCALL_NR_OFFSET PT_OFFSET(ORIG_EAX)
-
-#define PT_SYSCALL_ARG1_OFFSET PT_OFFSET(EBX)
-#define PT_SYSCALL_ARG2_OFFSET PT_OFFSET(ECX)
-#define PT_SYSCALL_ARG3_OFFSET PT_OFFSET(EDX)
-#define PT_SYSCALL_ARG4_OFFSET PT_OFFSET(ESI)
-#define PT_SYSCALL_ARG5_OFFSET PT_OFFSET(EDI)
-#define PT_SYSCALL_ARG6_OFFSET PT_OFFSET(EBP)
-
-#define PT_SYSCALL_RET_OFFSET PT_OFFSET(EAX)
-
-#define REGS_SYSCALL_NR EAX /* This is used before a system call */
-#define REGS_SYSCALL_ARG1 EBX
-#define REGS_SYSCALL_ARG2 ECX
-#define REGS_SYSCALL_ARG3 EDX
-#define REGS_SYSCALL_ARG4 ESI
-#define REGS_SYSCALL_ARG5 EDI
-#define REGS_SYSCALL_ARG6 EBP
-
-#define REGS_IP_INDEX EIP
-#define REGS_SP_INDEX UESP
-
-#define PT_IP_OFFSET PT_OFFSET(EIP)
-#define PT_IP(regs) ((regs)[EIP])
-#define PT_SP_OFFSET PT_OFFSET(UESP)
-#define PT_SP(regs) ((regs)[UESP])
-
-#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
-
-#ifndef FRAME_SIZE
-#define FRAME_SIZE (17)
-#endif
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/sc.h b/arch/um/sys-i386/shared/sysdep/sc.h
deleted file mode 100644
index c57d178..0000000
--- a/arch/um/sys-i386/shared/sysdep/sc.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __SYSDEP_I386_SC_H
-#define __SYSDEP_I386_SC_H
-
-#include <user_constants.h>
-
-#define SC_OFFSET(sc, field) \
- *((unsigned long *) &(((char *) (sc))[HOST_##field]))
-#define SC_FP_OFFSET(sc, field) \
- *((unsigned long *) &(((char *) (SC_FPSTATE(sc)))[HOST_##field]))
-#define SC_FP_OFFSET_PTR(sc, field, type) \
- ((type *) &(((char *) (SC_FPSTATE(sc)))[HOST_##field]))
-
-#define SC_IP(sc) SC_OFFSET(sc, SC_IP)
-#define SC_SP(sc) SC_OFFSET(sc, SC_SP)
-#define SC_FS(sc) SC_OFFSET(sc, SC_FS)
-#define SC_GS(sc) SC_OFFSET(sc, SC_GS)
-#define SC_DS(sc) SC_OFFSET(sc, SC_DS)
-#define SC_ES(sc) SC_OFFSET(sc, SC_ES)
-#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
-#define SC_CS(sc) SC_OFFSET(sc, SC_CS)
-#define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS)
-#define SC_EAX(sc) SC_OFFSET(sc, SC_EAX)
-#define SC_EBX(sc) SC_OFFSET(sc, SC_EBX)
-#define SC_ECX(sc) SC_OFFSET(sc, SC_ECX)
-#define SC_EDX(sc) SC_OFFSET(sc, SC_EDX)
-#define SC_EDI(sc) SC_OFFSET(sc, SC_EDI)
-#define SC_ESI(sc) SC_OFFSET(sc, SC_ESI)
-#define SC_EBP(sc) SC_OFFSET(sc, SC_EBP)
-#define SC_TRAPNO(sc) SC_OFFSET(sc, SC_TRAPNO)
-#define SC_ERR(sc) SC_OFFSET(sc, SC_ERR)
-#define SC_CR2(sc) SC_OFFSET(sc, SC_CR2)
-#define SC_FPSTATE(sc) SC_OFFSET(sc, SC_FPSTATE)
-#define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK)
-#define SC_FP_CW(sc) SC_FP_OFFSET(sc, SC_FP_CW)
-#define SC_FP_SW(sc) SC_FP_OFFSET(sc, SC_FP_SW)
-#define SC_FP_TAG(sc) SC_FP_OFFSET(sc, SC_FP_TAG)
-#define SC_FP_IPOFF(sc) SC_FP_OFFSET(sc, SC_FP_IPOFF)
-#define SC_FP_CSSEL(sc) SC_FP_OFFSET(sc, SC_FP_CSSEL)
-#define SC_FP_DATAOFF(sc) SC_FP_OFFSET(sc, SC_FP_DATAOFF)
-#define SC_FP_DATASEL(sc) SC_FP_OFFSET(sc, SC_FP_DATASEL)
-#define SC_FP_ST(sc) SC_FP_OFFSET_PTR(sc, SC_FP_ST, struct _fpstate)
-#define SC_FXSR_ENV(sc) SC_FP_OFFSET_PTR(sc, SC_FXSR_ENV, void)
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/sigcontext.h b/arch/um/sys-i386/shared/sysdep/sigcontext.h
deleted file mode 100644
index f583c87..0000000
--- a/arch/um/sys-i386/shared/sysdep/sigcontext.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYS_SIGCONTEXT_I386_H
-#define __SYS_SIGCONTEXT_I386_H
-
-#include "sysdep/sc.h"
-
-#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
-
-#define GET_FAULTINFO_FROM_SC(fi, sc) \
- { \
- (fi).cr2 = SC_CR2(sc); \
- (fi).error_code = SC_ERR(sc); \
- (fi).trap_no = SC_TRAPNO(sc); \
- }
-
-/* This is Page Fault */
-#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
-
-/* SKAS3 has no trap_no on i386, but get_skas_faultinfo() sets it to 0. */
-#define SEGV_MAYBE_FIXABLE(fi) ((fi)->trap_no == 0 && ptrace_faultinfo)
-
-#endif
diff --git a/arch/um/sys-i386/shared/sysdep/vm-flags.h b/arch/um/sys-i386/shared/sysdep/vm-flags.h
deleted file mode 100644
index e0d24c5..0000000
--- a/arch/um/sys-i386/shared/sysdep/vm-flags.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Licensed under the GPL
- */
-
-#ifndef __VM_FLAGS_I386_H
-#define __VM_FLAGS_I386_H
-
-#define VM_DATA_DEFAULT_FLAGS \
- (VM_READ | VM_WRITE | \
- ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#endif
diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c
deleted file mode 100644
index 28ccf73..0000000
--- a/arch/um/sys-i386/stub_segv.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include "sysdep/stub.h"
-#include "sysdep/sigcontext.h"
-
-void __attribute__ ((__section__ (".__syscall_stub")))
-stub_segv_handler(int sig)
-{
- struct sigcontext *sc = (struct sigcontext *) (&sig + 1);
-
- GET_FAULTINFO_FROM_SC(*((struct faultinfo *) STUB_DATA), sc);
-
- trap_myself();
-}
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
deleted file mode 100644
index 5f883bf..0000000
--- a/arch/um/sys-i386/user-offsets.c
+++ /dev/null
@@ -1,53 +0,0 @@
-#include <stdio.h>
-#include <stddef.h>
-#include <signal.h>
-#include <sys/poll.h>
-#include <sys/user.h>
-#include <sys/mman.h>
-#include <asm/ptrace.h>
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define DEFINE_LONGS(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
-
-#define OFFSET(sym, str, mem) \
- DEFINE(sym, offsetof(struct str, mem));
-
-void foo(void)
-{
- OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
- OFFSET(HOST_SC_ERR, sigcontext, err);
- OFFSET(HOST_SC_CR2, sigcontext, cr2);
-
- DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
- DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
-
- DEFINE(HOST_IP, EIP);
- DEFINE(HOST_SP, UESP);
- DEFINE(HOST_EFLAGS, EFL);
- DEFINE(HOST_EAX, EAX);
- DEFINE(HOST_EBX, EBX);
- DEFINE(HOST_ECX, ECX);
- DEFINE(HOST_EDX, EDX);
- DEFINE(HOST_ESI, ESI);
- DEFINE(HOST_EDI, EDI);
- DEFINE(HOST_EBP, EBP);
- DEFINE(HOST_CS, CS);
- DEFINE(HOST_SS, SS);
- DEFINE(HOST_DS, DS);
- DEFINE(HOST_FS, FS);
- DEFINE(HOST_ES, ES);
- DEFINE(HOST_GS, GS);
- DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
-
- /* XXX Duplicated between i386 and x86_64 */
- DEFINE(UM_POLLIN, POLLIN);
- DEFINE(UM_POLLPRI, POLLPRI);
- DEFINE(UM_POLLOUT, POLLOUT);
-
- DEFINE(UM_PROT_READ, PROT_READ);
- DEFINE(UM_PROT_WRITE, PROT_WRITE);
- DEFINE(UM_PROT_EXEC, PROT_EXEC);
-}
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
deleted file mode 100644
index bd4d1d3..0000000
--- a/arch/um/sys-x86_64/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright 2003 PathScale, Inc.
-#
-# Licensed under the GPL
-#
-
-obj-y = bug.o bugs.o delay.o fault.o ldt.o ptrace.o ptrace_user.o mem.o \
- setjmp.o signal.o stub.o stub_segv.o syscalls.o syscall_table.o \
- sysrq.o ksyms.o tls.o
-
-obj-y += vdso/
-
-subarch-obj-y = lib/csum-partial_64.o lib/memcpy_64.o lib/thunk_64.o \
- lib/rwsem.o
-subarch-obj-$(CONFIG_MODULES) += kernel/module.o
-
-ldt-y = ../sys-i386/ldt.o
-
-USER_OBJS := ptrace_user.o
-
-USER_OBJS += user-offsets.s
-extra-y += user-offsets.s
-
-UNPROFILE_OBJS := stub_segv.o
-CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
-
-include arch/um/scripts/Makefile.rules
diff --git a/arch/um/sys-x86_64/asm/archparam.h b/arch/um/sys-x86_64/asm/archparam.h
deleted file mode 100644
index 6c08366..0000000
--- a/arch/um/sys-x86_64/asm/archparam.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_ARCHPARAM_X86_64_H
-#define __UM_ARCHPARAM_X86_64_H
-
-
-/* No user-accessible fixmap addresses, i.e. vsyscall */
-#define FIXADDR_USER_START 0
-#define FIXADDR_USER_END 0
-
-#endif
-
diff --git a/arch/um/sys-x86_64/asm/elf.h b/arch/um/sys-x86_64/asm/elf.h
deleted file mode 100644
index 11a2bfb..0000000
--- a/arch/um/sys-x86_64/asm/elf.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * Licensed under the GPL
- */
-#ifndef __UM_ELF_X86_64_H
-#define __UM_ELF_X86_64_H
-
-#include <asm/user.h>
-#include "skas.h"
-
-/* x86-64 relocation types, taken from asm-x86_64/elf.h */
-#define R_X86_64_NONE 0 /* No reloc */
-#define R_X86_64_64 1 /* Direct 64 bit */
-#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
-#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
-#define R_X86_64_PLT32 4 /* 32 bit PLT address */
-#define R_X86_64_COPY 5 /* Copy symbol at runtime */
-#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
-#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
-#define R_X86_64_RELATIVE 8 /* Adjust by program base */
-#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative
- offset to GOT */
-#define R_X86_64_32 10 /* Direct 32 bit zero extended */
-#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
-#define R_X86_64_16 12 /* Direct 16 bit zero extended */
-#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
-#define R_X86_64_8 14 /* Direct 8 bit sign extended */
-#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
-
-#define R_X86_64_NUM 16
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_i387_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- ((x)->e_machine == EM_X86_64)
-
-#define ELF_CLASS ELFCLASS64
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_X86_64
-
-#define ELF_PLAT_INIT(regs, load_addr) do { \
- PT_REGS_RBX(regs) = 0; \
- PT_REGS_RCX(regs) = 0; \
- PT_REGS_RDX(regs) = 0; \
- PT_REGS_RSI(regs) = 0; \
- PT_REGS_RDI(regs) = 0; \
- PT_REGS_RBP(regs) = 0; \
- PT_REGS_RAX(regs) = 0; \
- PT_REGS_R8(regs) = 0; \
- PT_REGS_R9(regs) = 0; \
- PT_REGS_R10(regs) = 0; \
- PT_REGS_R11(regs) = 0; \
- PT_REGS_R12(regs) = 0; \
- PT_REGS_R13(regs) = 0; \
- PT_REGS_R14(regs) = 0; \
- PT_REGS_R15(regs) = 0; \
-} while (0)
-
-#define ELF_CORE_COPY_REGS(pr_reg, _regs) \
- (pr_reg)[0] = (_regs)->regs.gp[0]; \
- (pr_reg)[1] = (_regs)->regs.gp[1]; \
- (pr_reg)[2] = (_regs)->regs.gp[2]; \
- (pr_reg)[3] = (_regs)->regs.gp[3]; \
- (pr_reg)[4] = (_regs)->regs.gp[4]; \
- (pr_reg)[5] = (_regs)->regs.gp[5]; \
- (pr_reg)[6] = (_regs)->regs.gp[6]; \
- (pr_reg)[7] = (_regs)->regs.gp[7]; \
- (pr_reg)[8] = (_regs)->regs.gp[8]; \
- (pr_reg)[9] = (_regs)->regs.gp[9]; \
- (pr_reg)[10] = (_regs)->regs.gp[10]; \
- (pr_reg)[11] = (_regs)->regs.gp[11]; \
- (pr_reg)[12] = (_regs)->regs.gp[12]; \
- (pr_reg)[13] = (_regs)->regs.gp[13]; \
- (pr_reg)[14] = (_regs)->regs.gp[14]; \
- (pr_reg)[15] = (_regs)->regs.gp[15]; \
- (pr_reg)[16] = (_regs)->regs.gp[16]; \
- (pr_reg)[17] = (_regs)->regs.gp[17]; \
- (pr_reg)[18] = (_regs)->regs.gp[18]; \
- (pr_reg)[19] = (_regs)->regs.gp[19]; \
- (pr_reg)[20] = (_regs)->regs.gp[20]; \
- (pr_reg)[21] = current->thread.arch.fs; \
- (pr_reg)[22] = 0; \
- (pr_reg)[23] = 0; \
- (pr_reg)[24] = 0; \
- (pr_reg)[25] = 0; \
- (pr_reg)[26] = 0;
-
-#define task_pt_regs(t) (&(t)->thread.regs)
-
-struct task_struct;
-
-extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
-
-#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
-
-#ifdef TIF_IA32 /* XXX */
-#error XXX, indeed
- clear_thread_flag(TIF_IA32);
-#endif
-
-#define ELF_EXEC_PAGESIZE 4096
-
-#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
-
-extern long elf_aux_hwcap;
-#define ELF_HWCAP (elf_aux_hwcap)
-
-#define ELF_PLATFORM "x86_64"
-
-#define SET_PERSONALITY(ex) do ; while(0)
-
-#define __HAVE_ARCH_GATE_AREA 1
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
-struct linux_binprm;
-extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int uses_interp);
-
-extern unsigned long um_vdso_addr;
-#define AT_SYSINFO_EHDR 33
-#define ARCH_DLINFO NEW_AUX_ENT(AT_SYSINFO_EHDR, um_vdso_addr)
-
-#endif
diff --git a/arch/um/sys-x86_64/asm/module.h b/arch/um/sys-x86_64/asm/module.h
deleted file mode 100644
index 8eb79c2..0000000
--- a/arch/um/sys-x86_64/asm/module.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __UM_MODULE_X86_64_H
-#define __UM_MODULE_X86_64_H
-
-/* UML is simple */
-struct mod_arch_specific
-{
-};
-
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Sym Elf64_Sym
-#define Elf_Ehdr Elf64_Ehdr
-
-#endif
-
diff --git a/arch/um/sys-x86_64/delay.c b/arch/um/sys-x86_64/delay.c
deleted file mode 100644
index f3fe1a6..0000000
--- a/arch/um/sys-x86_64/delay.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Richard Weinberger <richrd@nod.at>
- * Mostly copied from arch/x86/lib/delay.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/param.h>
-
-void __delay(unsigned long loops)
-{
- asm volatile(
- "test %0,%0\n"
- "jz 3f\n"
- "jmp 1f\n"
-
- ".align 16\n"
- "1: jmp 2f\n"
-
- ".align 16\n"
- "2: dec %0\n"
- " jnz 2b\n"
- "3: dec %0\n"
-
- : /* we don't need output */
- : "a" (loops)
- );
-}
-EXPORT_SYMBOL(__delay);
-
-inline void __const_udelay(unsigned long xloops)
-{
- int d0;
-
- xloops *= 4;
- asm("mull %%edx"
- : "=d" (xloops), "=&a" (d0)
- : "1" (xloops), "0"
- (loops_per_jiffy * (HZ/4)));
-
- __delay(++xloops);
-}
-EXPORT_SYMBOL(__const_udelay);
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
-}
-EXPORT_SYMBOL(__udelay);
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
-}
-EXPORT_SYMBOL(__ndelay);
diff --git a/arch/um/sys-x86_64/fault.c b/arch/um/sys-x86_64/fault.c
deleted file mode 100644
index ce85117..0000000
--- a/arch/um/sys-x86_64/fault.c
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#include "sysdep/ptrace.h"
-
-/* These two are from asm-um/uaccess.h and linux/module.h, check them. */
-struct exception_table_entry
-{
- unsigned long insn;
- unsigned long fixup;
-};
-
-const struct exception_table_entry *search_exception_tables(unsigned long add);
-
-int arch_fixup(unsigned long address, struct uml_pt_regs *regs)
-{
- const struct exception_table_entry *fixup;
-
- fixup = search_exception_tables(address);
- if (fixup != 0) {
- UPT_IP(regs) = fixup->fixup;
- return 1;
- }
- return 0;
-}
diff --git a/arch/um/sys-x86_64/ptrace_user.c b/arch/um/sys-x86_64/ptrace_user.c
deleted file mode 100644
index c57a496..0000000
--- a/arch/um/sys-x86_64/ptrace_user.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#include <errno.h>
-#include "ptrace_user.h"
-
-int ptrace_getregs(long pid, unsigned long *regs_out)
-{
- if (ptrace(PTRACE_GETREGS, pid, 0, regs_out) < 0)
- return -errno;
- return(0);
-}
-
-int ptrace_setregs(long pid, unsigned long *regs_out)
-{
- if (ptrace(PTRACE_SETREGS, pid, 0, regs_out) < 0)
- return -errno;
- return(0);
-}
diff --git a/arch/um/sys-x86_64/shared/sysdep/barrier.h b/arch/um/sys-x86_64/shared/sysdep/barrier.h
deleted file mode 100644
index 7b610be..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/barrier.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __SYSDEP_X86_64_BARRIER_H
-#define __SYSDEP_X86_64_BARRIER_H
-
-/* Copied from include/asm-x86_64 for use by userspace. */
-#define mb() asm volatile("mfence":::"memory")
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/host_ldt.h b/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
deleted file mode 100644
index e8b1be1..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/host_ldt.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef __ASM_HOST_LDT_X86_64_H
-#define __ASM_HOST_LDT_X86_64_H
-
-#include <asm/ldt.h>
-
-/*
- * macros stolen from include/asm-x86_64/desc.h
- */
-#define LDT_entry_a(info) \
- ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
-
-/* Don't allow setting of the lm bit. It is useless anyways because
- * 64bit system calls require __USER_CS. */
-#define LDT_entry_b(info) \
- (((info)->base_addr & 0xff000000) | \
- (((info)->base_addr & 0x00ff0000) >> 16) | \
- ((info)->limit & 0xf0000) | \
- (((info)->read_exec_only ^ 1) << 9) | \
- ((info)->contents << 10) | \
- (((info)->seg_not_present ^ 1) << 15) | \
- ((info)->seg_32bit << 22) | \
- ((info)->limit_in_pages << 23) | \
- ((info)->useable << 20) | \
- /* ((info)->lm << 21) | */ \
- 0x7000)
-
-#define LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0 && \
- (info)->lm == 0)
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h b/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
deleted file mode 100644
index a307237..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/kernel-offsets.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/elf.h>
-#include <linux/crypto.h>
-#include <asm/page.h>
-#include <asm/mman.h>
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define DEFINE_STR1(x) #x
-#define DEFINE_STR(sym, val) asm volatile("\n->" #sym " " DEFINE_STR1(val) " " #val: : )
-
-#define BLANK() asm volatile("\n->" : : )
-
-#define OFFSET(sym, str, mem) \
- DEFINE(sym, offsetof(struct str, mem));
-
-void foo(void)
-{
-#include <common-offsets.h>
-}
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
deleted file mode 100644
index 8ee8f8e..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_PTRACE_H
-#define __SYSDEP_X86_64_PTRACE_H
-
-#include "user_constants.h"
-#include "sysdep/faultinfo.h"
-
-#define MAX_REG_OFFSET (UM_FRAME_SIZE)
-#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
-
-#include "skas_ptregs.h"
-
-#define REGS_IP(r) ((r)[HOST_IP])
-#define REGS_SP(r) ((r)[HOST_SP])
-
-#define REGS_RBX(r) ((r)[HOST_RBX])
-#define REGS_RCX(r) ((r)[HOST_RCX])
-#define REGS_RDX(r) ((r)[HOST_RDX])
-#define REGS_RSI(r) ((r)[HOST_RSI])
-#define REGS_RDI(r) ((r)[HOST_RDI])
-#define REGS_RBP(r) ((r)[HOST_RBP])
-#define REGS_RAX(r) ((r)[HOST_RAX])
-#define REGS_R8(r) ((r)[HOST_R8])
-#define REGS_R9(r) ((r)[HOST_R9])
-#define REGS_R10(r) ((r)[HOST_R10])
-#define REGS_R11(r) ((r)[HOST_R11])
-#define REGS_R12(r) ((r)[HOST_R12])
-#define REGS_R13(r) ((r)[HOST_R13])
-#define REGS_R14(r) ((r)[HOST_R14])
-#define REGS_R15(r) ((r)[HOST_R15])
-#define REGS_CS(r) ((r)[HOST_CS])
-#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
-#define REGS_SS(r) ((r)[HOST_SS])
-
-#define HOST_FS_BASE 21
-#define HOST_GS_BASE 22
-#define HOST_DS 23
-#define HOST_ES 24
-#define HOST_FS 25
-#define HOST_GS 26
-
-/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these
- * are already defined for kernel code, but not for userspace code.
- */
-#ifndef FS_BASE
-/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
- * which is what x86_64 ptrace actually uses.
- */
-#define FS_BASE (HOST_FS_BASE * sizeof(long))
-#define GS_BASE (HOST_GS_BASE * sizeof(long))
-#define DS (HOST_DS * sizeof(long))
-#define ES (HOST_ES * sizeof(long))
-#define FS (HOST_FS * sizeof(long))
-#define GS (HOST_GS * sizeof(long))
-#endif
-
-#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
-#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
-#define REGS_DS(r) ((r)[HOST_DS])
-#define REGS_ES(r) ((r)[HOST_ES])
-#define REGS_FS(r) ((r)[HOST_FS])
-#define REGS_GS(r) ((r)[HOST_GS])
-
-#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_RAX])
-
-#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
-
-#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
-
-#define REGS_SEGV_IS_FIXABLE(r) SEGV_IS_FIXABLE((r)->trap_type)
-
-#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
-
-#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
-
-#define REGS_TRAP(r) ((r)->trap_type)
-
-#define REGS_ERR(r) ((r)->fault_type)
-
-struct uml_pt_regs {
- unsigned long gp[MAX_REG_NR];
- unsigned long fp[HOST_FP_SIZE];
- struct faultinfo faultinfo;
- long syscall;
- int is_user;
-};
-
-#define EMPTY_UML_PT_REGS { }
-
-#define UPT_RBX(r) REGS_RBX((r)->gp)
-#define UPT_RCX(r) REGS_RCX((r)->gp)
-#define UPT_RDX(r) REGS_RDX((r)->gp)
-#define UPT_RSI(r) REGS_RSI((r)->gp)
-#define UPT_RDI(r) REGS_RDI((r)->gp)
-#define UPT_RBP(r) REGS_RBP((r)->gp)
-#define UPT_RAX(r) REGS_RAX((r)->gp)
-#define UPT_R8(r) REGS_R8((r)->gp)
-#define UPT_R9(r) REGS_R9((r)->gp)
-#define UPT_R10(r) REGS_R10((r)->gp)
-#define UPT_R11(r) REGS_R11((r)->gp)
-#define UPT_R12(r) REGS_R12((r)->gp)
-#define UPT_R13(r) REGS_R13((r)->gp)
-#define UPT_R14(r) REGS_R14((r)->gp)
-#define UPT_R15(r) REGS_R15((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
-#define UPT_FS(r) REGS_FS((r)->gp)
-#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
-#define UPT_GS(r) REGS_GS((r)->gp)
-#define UPT_DS(r) REGS_DS((r)->gp)
-#define UPT_ES(r) REGS_ES((r)->gp)
-#define UPT_CS(r) REGS_CS((r)->gp)
-#define UPT_SS(r) REGS_SS((r)->gp)
-#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
-
-#define UPT_IP(r) REGS_IP((r)->gp)
-#define UPT_SP(r) REGS_SP((r)->gp)
-
-#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
-#define UPT_SYSCALL_NR(r) ((r)->syscall)
-#define UPT_SYSCALL_RET(r) UPT_RAX(r)
-
-extern int user_context(unsigned long sp);
-
-#define UPT_IS_USER(r) ((r)->is_user)
-
-#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
-#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
-#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
-#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
-#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
-#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
-
-struct syscall_args {
- unsigned long args[6];
-};
-
-#define SYSCALL_ARGS(r) ((struct syscall_args) \
- { .args = { UPT_SYSCALL_ARG1(r), \
- UPT_SYSCALL_ARG2(r), \
- UPT_SYSCALL_ARG3(r), \
- UPT_SYSCALL_ARG4(r), \
- UPT_SYSCALL_ARG5(r), \
- UPT_SYSCALL_ARG6(r) } } )
-
-#define UPT_REG(regs, reg) \
- ({ unsigned long val; \
- switch(reg){ \
- case R8: val = UPT_R8(regs); break; \
- case R9: val = UPT_R9(regs); break; \
- case R10: val = UPT_R10(regs); break; \
- case R11: val = UPT_R11(regs); break; \
- case R12: val = UPT_R12(regs); break; \
- case R13: val = UPT_R13(regs); break; \
- case R14: val = UPT_R14(regs); break; \
- case R15: val = UPT_R15(regs); break; \
- case RIP: val = UPT_IP(regs); break; \
- case RSP: val = UPT_SP(regs); break; \
- case RAX: val = UPT_RAX(regs); break; \
- case RBX: val = UPT_RBX(regs); break; \
- case RCX: val = UPT_RCX(regs); break; \
- case RDX: val = UPT_RDX(regs); break; \
- case RSI: val = UPT_RSI(regs); break; \
- case RDI: val = UPT_RDI(regs); break; \
- case RBP: val = UPT_RBP(regs); break; \
- case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
- case CS: val = UPT_CS(regs); break; \
- case SS: val = UPT_SS(regs); break; \
- case FS_BASE: val = UPT_FS_BASE(regs); break; \
- case GS_BASE: val = UPT_GS_BASE(regs); break; \
- case DS: val = UPT_DS(regs); break; \
- case ES: val = UPT_ES(regs); break; \
- case FS : val = UPT_FS (regs); break; \
- case GS: val = UPT_GS(regs); break; \
- case EFLAGS: val = UPT_EFLAGS(regs); break; \
- default : \
- panic("Bad register in UPT_REG : %d\n", reg); \
- val = -1; \
- } \
- val; \
- })
-
-
-#define UPT_SET(regs, reg, val) \
- ({ unsigned long __upt_val = val; \
- switch(reg){ \
- case R8: UPT_R8(regs) = __upt_val; break; \
- case R9: UPT_R9(regs) = __upt_val; break; \
- case R10: UPT_R10(regs) = __upt_val; break; \
- case R11: UPT_R11(regs) = __upt_val; break; \
- case R12: UPT_R12(regs) = __upt_val; break; \
- case R13: UPT_R13(regs) = __upt_val; break; \
- case R14: UPT_R14(regs) = __upt_val; break; \
- case R15: UPT_R15(regs) = __upt_val; break; \
- case RIP: UPT_IP(regs) = __upt_val; break; \
- case RSP: UPT_SP(regs) = __upt_val; break; \
- case RAX: UPT_RAX(regs) = __upt_val; break; \
- case RBX: UPT_RBX(regs) = __upt_val; break; \
- case RCX: UPT_RCX(regs) = __upt_val; break; \
- case RDX: UPT_RDX(regs) = __upt_val; break; \
- case RSI: UPT_RSI(regs) = __upt_val; break; \
- case RDI: UPT_RDI(regs) = __upt_val; break; \
- case RBP: UPT_RBP(regs) = __upt_val; break; \
- case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
- case CS: UPT_CS(regs) = __upt_val; break; \
- case SS: UPT_SS(regs) = __upt_val; break; \
- case FS_BASE: UPT_FS_BASE(regs) = __upt_val; break; \
- case GS_BASE: UPT_GS_BASE(regs) = __upt_val; break; \
- case DS: UPT_DS(regs) = __upt_val; break; \
- case ES: UPT_ES(regs) = __upt_val; break; \
- case FS: UPT_FS(regs) = __upt_val; break; \
- case GS: UPT_GS(regs) = __upt_val; break; \
- case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
- default : \
- panic("Bad register in UPT_SET : %d\n", reg); \
- break; \
- } \
- __upt_val; \
- })
-
-#define UPT_SET_SYSCALL_RETURN(r, res) \
- REGS_SET_SYSCALL_RETURN((r)->regs, (res))
-
-#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
-
-#define UPT_SEGV_IS_FIXABLE(r) REGS_SEGV_IS_FIXABLE(&r->skas)
-
-#define UPT_FAULTINFO(r) (&(r)->faultinfo)
-
-static inline void arch_init_registers(int pid)
-{
-}
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h b/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
deleted file mode 100644
index 4dbccdb..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/ptrace_user.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_PTRACE_USER_H__
-#define __SYSDEP_X86_64_PTRACE_USER_H__
-
-#define __FRAME_OFFSETS
-#include <sys/ptrace.h>
-#include <linux/ptrace.h>
-#include <asm/ptrace.h>
-#undef __FRAME_OFFSETS
-#include "user_constants.h"
-
-#define PT_INDEX(off) ((off) / sizeof(unsigned long))
-
-#define PT_SYSCALL_NR(regs) ((regs)[PT_INDEX(ORIG_RAX)])
-#define PT_SYSCALL_NR_OFFSET (ORIG_RAX)
-
-#define PT_SYSCALL_ARG1(regs) (((unsigned long *) (regs))[PT_INDEX(RDI)])
-#define PT_SYSCALL_ARG1_OFFSET (RDI)
-
-#define PT_SYSCALL_ARG2(regs) (((unsigned long *) (regs))[PT_INDEX(RSI)])
-#define PT_SYSCALL_ARG2_OFFSET (RSI)
-
-#define PT_SYSCALL_ARG3(regs) (((unsigned long *) (regs))[PT_INDEX(RDX)])
-#define PT_SYSCALL_ARG3_OFFSET (RDX)
-
-#define PT_SYSCALL_ARG4(regs) (((unsigned long *) (regs))[PT_INDEX(RCX)])
-#define PT_SYSCALL_ARG4_OFFSET (RCX)
-
-#define PT_SYSCALL_ARG5(regs) (((unsigned long *) (regs))[PT_INDEX(R8)])
-#define PT_SYSCALL_ARG5_OFFSET (R8)
-
-#define PT_SYSCALL_ARG6(regs) (((unsigned long *) (regs))[PT_INDEX(R9)])
-#define PT_SYSCALL_ARG6_OFFSET (R9)
-
-#define PT_SYSCALL_RET_OFFSET (RAX)
-
-#define PT_IP_OFFSET (RIP)
-#define PT_IP(regs) ((regs)[PT_INDEX(RIP)])
-
-#define PT_SP_OFFSET (RSP)
-#define PT_SP(regs) ((regs)[PT_INDEX(RSP)])
-
-#define PT_ORIG_RAX_OFFSET (ORIG_RAX)
-#define PT_ORIG_RAX(regs) ((regs)[PT_INDEX(ORIG_RAX)])
-
-/*
- * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
- * it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
- * 2.4 name and value for 2.4 host compatibility.
- */
-#ifndef PTRACE_OLDSETOPTIONS
-#define PTRACE_OLDSETOPTIONS 21
-#endif
-
-/*
- * These are before the system call, so the system call number is RAX
- * rather than ORIG_RAX, and arg4 is R10 rather than RCX
- */
-#define REGS_SYSCALL_NR PT_INDEX(RAX)
-#define REGS_SYSCALL_ARG1 PT_INDEX(RDI)
-#define REGS_SYSCALL_ARG2 PT_INDEX(RSI)
-#define REGS_SYSCALL_ARG3 PT_INDEX(RDX)
-#define REGS_SYSCALL_ARG4 PT_INDEX(R10)
-#define REGS_SYSCALL_ARG5 PT_INDEX(R8)
-#define REGS_SYSCALL_ARG6 PT_INDEX(R9)
-
-#define REGS_IP_INDEX PT_INDEX(RIP)
-#define REGS_SP_INDEX PT_INDEX(RSP)
-
-#define FP_SIZE (HOST_FP_SIZE)
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/sc.h b/arch/um/sys-x86_64/shared/sysdep/sc.h
deleted file mode 100644
index 8aee45b..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/sc.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __SYSDEP_X86_64_SC_H
-#define __SYSDEP_X86_64_SC_H
-
-/* Copyright (C) 2003 - 2004 PathScale, Inc
- * Released under the GPL
- */
-
-#include <user_constants.h>
-
-#define SC_OFFSET(sc, field) \
- *((unsigned long *) &(((char *) (sc))[HOST_##field]))
-
-#define SC_RBX(sc) SC_OFFSET(sc, SC_RBX)
-#define SC_RCX(sc) SC_OFFSET(sc, SC_RCX)
-#define SC_RDX(sc) SC_OFFSET(sc, SC_RDX)
-#define SC_RSI(sc) SC_OFFSET(sc, SC_RSI)
-#define SC_RDI(sc) SC_OFFSET(sc, SC_RDI)
-#define SC_RBP(sc) SC_OFFSET(sc, SC_RBP)
-#define SC_RAX(sc) SC_OFFSET(sc, SC_RAX)
-#define SC_R8(sc) SC_OFFSET(sc, SC_R8)
-#define SC_R9(sc) SC_OFFSET(sc, SC_R9)
-#define SC_R10(sc) SC_OFFSET(sc, SC_R10)
-#define SC_R11(sc) SC_OFFSET(sc, SC_R11)
-#define SC_R12(sc) SC_OFFSET(sc, SC_R12)
-#define SC_R13(sc) SC_OFFSET(sc, SC_R13)
-#define SC_R14(sc) SC_OFFSET(sc, SC_R14)
-#define SC_R15(sc) SC_OFFSET(sc, SC_R15)
-#define SC_IP(sc) SC_OFFSET(sc, SC_IP)
-#define SC_SP(sc) SC_OFFSET(sc, SC_SP)
-#define SC_CR2(sc) SC_OFFSET(sc, SC_CR2)
-#define SC_ERR(sc) SC_OFFSET(sc, SC_ERR)
-#define SC_TRAPNO(sc) SC_OFFSET(sc, SC_TRAPNO)
-#define SC_CS(sc) SC_OFFSET(sc, SC_CS)
-#define SC_FS(sc) SC_OFFSET(sc, SC_FS)
-#define SC_GS(sc) SC_OFFSET(sc, SC_GS)
-#define SC_EFLAGS(sc) SC_OFFSET(sc, SC_EFLAGS)
-#define SC_SIGMASK(sc) SC_OFFSET(sc, SC_SIGMASK)
-#define SC_SS(sc) SC_OFFSET(sc, SC_SS)
-#if 0
-#define SC_ORIG_RAX(sc) SC_OFFSET(sc, SC_ORIG_RAX)
-#define SC_DS(sc) SC_OFFSET(sc, SC_DS)
-#define SC_ES(sc) SC_OFFSET(sc, SC_ES)
-#endif
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/sigcontext.h b/arch/um/sys-x86_64/shared/sysdep/sigcontext.h
deleted file mode 100644
index 0155133..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/sigcontext.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2003 PathScale, Inc.
- *
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_SIGCONTEXT_H
-#define __SYSDEP_X86_64_SIGCONTEXT_H
-
-#include <sysdep/sc.h>
-
-#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
-
-#define GET_FAULTINFO_FROM_SC(fi, sc) \
- { \
- (fi).cr2 = SC_CR2(sc); \
- (fi).error_code = SC_ERR(sc); \
- (fi).trap_no = SC_TRAPNO(sc); \
- }
-
-/* This is Page Fault */
-#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
-
-/* No broken SKAS API, which doesn't pass trap_no, here. */
-#define SEGV_MAYBE_FIXABLE(fi) 0
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h b/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
deleted file mode 100644
index 95db4be7..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/skas_ptrace.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
-
-#ifndef __SYSDEP_X86_64_SKAS_PTRACE_H
-#define __SYSDEP_X86_64_SKAS_PTRACE_H
-
-struct ptrace_faultinfo {
- int is_write;
- unsigned long addr;
-};
-
-struct ptrace_ldt {
- int func;
- void *ptr;
- unsigned long bytecount;
-};
-
-#define PTRACE_LDT 54
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/system.h b/arch/um/sys-x86_64/shared/sysdep/system.h
deleted file mode 100644
index d1b93c4..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/system.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef _ASM_X86_SYSTEM_H_
-#define _ASM_X86_SYSTEM_H_
-
-#include <asm/asm.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-#include <asm/nops.h>
-
-#include <linux/kernel.h>
-#include <linux/irqflags.h>
-
-/* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
-# define AT_VECTOR_SIZE_ARCH 2
-#else
-# define AT_VECTOR_SIZE_ARCH 1
-#endif
-
-extern unsigned long arch_align_stack(unsigned long sp);
-
-void default_idle(void);
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- */
-#ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define mb() asm volatile("mfence":::"memory")
-#define rmb() asm volatile("lfence":::"memory")
-#define wmb() asm volatile("sfence" ::: "memory")
-#endif
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#ifdef CONFIG_X86_PPRO_FENCE
-# define smp_rmb() rmb()
-#else
-# define smp_rmb() barrier()
-#endif
-#ifdef CONFIG_X86_OOSTORE
-# define smp_wmb() wmb()
-#else
-# define smp_wmb() barrier()
-#endif
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-/*
- * Stop RDTSC speculation. This is needed when you need to use RDTSC
- * (or get_cycles or vread that possibly accesses the TSC) in a defined
- * code region.
- *
- * (Could use an alternative three way for this if there was one.)
- */
-static inline void rdtsc_barrier(void)
-{
- alternative(ASM_NOP3, "mfence", X86_FEATURE_MFENCE_RDTSC);
- alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
-}
-
-#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/tls.h b/arch/um/sys-x86_64/shared/sysdep/tls.h
deleted file mode 100644
index 18c000d..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/tls.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef _SYSDEP_TLS_H
-#define _SYSDEP_TLS_H
-
-# ifndef __KERNEL__
-
-/* Change name to avoid conflicts with the original one from <asm/ldt.h>, which
- * may be named user_desc (but in 2.4 and in header matching its API was named
- * modify_ldt_ldt_s). */
-
-typedef struct um_dup_user_desc {
- unsigned int entry_number;
- unsigned int base_addr;
- unsigned int limit;
- unsigned int seg_32bit:1;
- unsigned int contents:2;
- unsigned int read_exec_only:1;
- unsigned int limit_in_pages:1;
- unsigned int seg_not_present:1;
- unsigned int useable:1;
- unsigned int lm:1;
-} user_desc_t;
-
-# else /* __KERNEL__ */
-
-# include <ldt.h>
-typedef struct user_desc user_desc_t;
-
-# endif /* __KERNEL__ */
-#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/sys-x86_64/shared/sysdep/vm-flags.h b/arch/um/sys-x86_64/shared/sysdep/vm-flags.h
deleted file mode 100644
index 3978e55..0000000
--- a/arch/um/sys-x86_64/shared/sysdep/vm-flags.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
- * Copyright 2003 PathScale, Inc.
- * Licensed under the GPL
- */
-
-#ifndef __VM_FLAGS_X86_64_H
-#define __VM_FLAGS_X86_64_H
-
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#define VM_STACK_DEFAULT_FLAGS (VM_GROWSDOWN | VM_READ | VM_WRITE | \
- VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#endif
diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c
deleted file mode 100644
index b6b65c7..0000000
--- a/arch/um/sys-x86_64/signal.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright (C) 2003 PathScale, Inc.
- * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/kernel.h>
-#include <asm/unistd.h>
-#include <asm/uaccess.h>
-#include <asm/ucontext.h>
-#include "frame_kern.h"
-#include "skas.h"
-
-void copy_sc(struct uml_pt_regs *regs, void *from)
-{
- struct sigcontext *sc = from;
-
-#define GETREG(regs, regno, sc, regname) \
- (regs)->gp[(regno) / sizeof(unsigned long)] = (sc)->regname
-
- GETREG(regs, R8, sc, r8);
- GETREG(regs, R9, sc, r9);
- GETREG(regs, R10, sc, r10);
- GETREG(regs, R11, sc, r11);
- GETREG(regs, R12, sc, r12);
- GETREG(regs, R13, sc, r13);
- GETREG(regs, R14, sc, r14);
- GETREG(regs, R15, sc, r15);
- GETREG(regs, RDI, sc, di);
- GETREG(regs, RSI, sc, si);
- GETREG(regs, RBP, sc, bp);
- GETREG(regs, RBX, sc, bx);
- GETREG(regs, RDX, sc, dx);
- GETREG(regs, RAX, sc, ax);
- GETREG(regs, RCX, sc, cx);
- GETREG(regs, RSP, sc, sp);
- GETREG(regs, RIP, sc, ip);
- GETREG(regs, EFLAGS, sc, flags);
- GETREG(regs, CS, sc, cs);
-
-#undef GETREG
-}
-
-static int copy_sc_from_user(struct pt_regs *regs,
- struct sigcontext __user *from,
- struct _fpstate __user *fpp)
-{
- struct user_i387_struct fp;
- int err = 0;
-
-#define GETREG(regs, regno, sc, regname) \
- __get_user((regs)->regs.gp[(regno) / sizeof(unsigned long)], \
- &(sc)->regname)
-
- err |= GETREG(regs, R8, from, r8);
- err |= GETREG(regs, R9, from, r9);
- err |= GETREG(regs, R10, from, r10);
- err |= GETREG(regs, R11, from, r11);
- err |= GETREG(regs, R12, from, r12);
- err |= GETREG(regs, R13, from, r13);
- err |= GETREG(regs, R14, from, r14);
- err |= GETREG(regs, R15, from, r15);
- err |= GETREG(regs, RDI, from, di);
- err |= GETREG(regs, RSI, from, si);
- err |= GETREG(regs, RBP, from, bp);
- err |= GETREG(regs, RBX, from, bx);
- err |= GETREG(regs, RDX, from, dx);
- err |= GETREG(regs, RAX, from, ax);
- err |= GETREG(regs, RCX, from, cx);
- err |= GETREG(regs, RSP, from, sp);
- err |= GETREG(regs, RIP, from, ip);
- err |= GETREG(regs, EFLAGS, from, flags);
- err |= GETREG(regs, CS, from, cs);
- if (err)
- return 1;
-
-#undef GETREG
-
- err = copy_from_user(&fp, fpp, sizeof(struct user_i387_struct));
- if (err)
- return 1;
-
- err = restore_fp_registers(userspace_pid[current_thread_info()->cpu],
- (unsigned long *) &fp);
- if (err < 0) {
- printk(KERN_ERR "copy_sc_from_user - "
- "restore_fp_registers failed, errno = %d\n",
- -err);
- return 1;
- }
-
- return 0;
-}
-
-static int copy_sc_to_user(struct sigcontext __user *to,
- struct _fpstate __user *to_fp, struct pt_regs *regs,
- unsigned long mask, unsigned long sp)
-{
- struct faultinfo * fi = ¤t->thread.arch.faultinfo;
- struct user_i387_struct fp;
- int err = 0;
-
- err |= __put_user(0, &to->gs);
- err |= __put_user(0, &to->fs);
-
-#define PUTREG(regs, regno, sc, regname) \
- __put_user((regs)->regs.gp[(regno) / sizeof(unsigned long)], \
- &(sc)->regname)
-
- err |= PUTREG(regs, RDI, to, di);
- err |= PUTREG(regs, RSI, to, si);
- err |= PUTREG(regs, RBP, to, bp);
- /*
- * Must use original RSP, which is passed in, rather than what's in
- * the pt_regs, because that's already been updated to point at the
- * signal frame.
- */
- err |= __put_user(sp, &to->sp);
- err |= PUTREG(regs, RBX, to, bx);
- err |= PUTREG(regs, RDX, to, dx);
- err |= PUTREG(regs, RCX, to, cx);
- err |= PUTREG(regs, RAX, to, ax);
- err |= PUTREG(regs, R8, to, r8);
- err |= PUTREG(regs, R9, to, r9);
- err |= PUTREG(regs, R10, to, r10);
- err |= PUTREG(regs, R11, to, r11);
- err |= PUTREG(regs, R12, to, r12);
- err |= PUTREG(regs, R13, to, r13);
- err |= PUTREG(regs, R14, to, r14);
- err |= PUTREG(regs, R15, to, r15);
- err |= PUTREG(regs, CS, to, cs); /* XXX x86_64 doesn't do this */
-
- err |= __put_user(fi->cr2, &to->cr2);
- err |= __put_user(fi->error_code, &to->err);
- err |= __put_user(fi->trap_no, &to->trapno);
-
- err |= PUTREG(regs, RIP, to, ip);
- err |= PUTREG(regs, EFLAGS, to, flags);
-#undef PUTREG
-
- err |= __put_user(mask, &to->oldmask);
- if (err)
- return 1;
-
- err = save_fp_registers(userspace_pid[current_thread_info()->cpu],
- (unsigned long *) &fp);
- if (err < 0) {
- printk(KERN_ERR "copy_sc_from_user - restore_fp_registers "
- "failed, errno = %d\n", -err);
- return 1;
- }
-
- if (copy_to_user(to_fp, &fp, sizeof(struct user_i387_struct)))
- return 1;
-
- return err;
-}
-
-struct rt_sigframe
-{
- char __user *pretcode;
- struct ucontext uc;
- struct siginfo info;
- struct _fpstate fpstate;
-};
-
-int setup_signal_stack_si(unsigned long stack_top, int sig,
- struct k_sigaction *ka, struct pt_regs * regs,
- siginfo_t *info, sigset_t *set)
-{
- struct rt_sigframe __user *frame;
- unsigned long save_sp = PT_REGS_RSP(regs);
- int err = 0;
- struct task_struct *me = current;
-
- frame = (struct rt_sigframe __user *)
- round_down(stack_top - sizeof(struct rt_sigframe), 16);
- /* Subtract 128 for a red zone and 8 for proper alignment */
- frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8);
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto out;
-
- if (ka->sa.sa_flags & SA_SIGINFO) {
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto out;
- }
-
- /*
- * Update SP now because the page fault handler refuses to extend
- * the stack if the faulting address is too far below the current
- * SP, which frame now certainly is. If there's an error, the original
- * value is restored on the way out.
- * When writing the sigcontext to the stack, we have to write the
- * original value, so that's passed to copy_sc_to_user, which does
- * the right thing with it.
- */
- PT_REGS_RSP(regs) = (unsigned long) frame;
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
- err |= __put_user(sas_ss_flags(save_sp),
- &frame->uc.uc_stack.ss_flags);
- err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= copy_sc_to_user(&frame->uc.uc_mcontext, &frame->fpstate, regs,
- set->sig[0], save_sp);
- err |= __put_user(&frame->fpstate, &frame->uc.uc_mcontext.fpstate);
- if (sizeof(*set) == 16) {
- __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
- __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
- }
- else
- err |= __copy_to_user(&frame->uc.uc_sigmask, set,
- sizeof(*set));
-
- /*
- * Set up to return from userspace. If provided, use a stub
- * already in userspace.
- */
- /* x86-64 should always use SA_RESTORER. */
- if (ka->sa.sa_flags & SA_RESTORER)
- err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
- else
- /* could use a vstub here */
- goto restore_sp;
-
- if (err)
- goto restore_sp;
-
- /* Set up registers for signal handler */
- {
- struct exec_domain *ed = current_thread_info()->exec_domain;
- if (unlikely(ed && ed->signal_invmap && sig < 32))
- sig = ed->signal_invmap[sig];
- }
-
- PT_REGS_RDI(regs) = sig;
- /* In case the signal handler was declared without prototypes */
- PT_REGS_RAX(regs) = 0;
-
- /*
- * This also works for non SA_SIGINFO handlers because they expect the
- * next argument after the signal number on the stack.
- */
- PT_REGS_RSI(regs) = (unsigned long) &frame->info;
- PT_REGS_RDX(regs) = (unsigned long) &frame->uc;
- PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler;
- out:
- return err;
-
-restore_sp:
- PT_REGS_RSP(regs) = save_sp;
- return err;
-}
-
-long sys_rt_sigreturn(struct pt_regs *regs)
-{
- unsigned long sp = PT_REGS_SP(¤t->thread.regs);
- struct rt_sigframe __user *frame =
- (struct rt_sigframe __user *)(sp - 8);
- struct ucontext __user *uc = &frame->uc;
- sigset_t set;
-
- if (copy_from_user(&set, &uc->uc_sigmask, sizeof(set)))
- goto segfault;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext,
- &frame->fpstate))
- goto segfault;
-
- /* Avoid ERESTART handling */
- PT_REGS_SYSCALL_NR(¤t->thread.regs) = -1;
- return PT_REGS_SYSCALL_RET(¤t->thread.regs);
-
- segfault:
- force_sig(SIGSEGV, current);
- return 0;
-}
diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c
deleted file mode 100644
index ced051a..0000000
--- a/arch/um/sys-x86_64/stub_segv.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
- * Licensed under the GPL
- */
-
-#include <signal.h>
-#include "as-layout.h"
-#include "sysdep/stub.h"
-#include "sysdep/faultinfo.h"
-#include "sysdep/sigcontext.h"
-
-void __attribute__ ((__section__ (".__syscall_stub")))
-stub_segv_handler(int sig)
-{
- struct ucontext *uc;
-
- __asm__ __volatile__("movq %%rdx, %0" : "=g" (uc) :);
- GET_FAULTINFO_FROM_SC(*((struct faultinfo *) STUB_DATA),
- &uc->uc_mcontext);
- trap_myself();
-}
-
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
deleted file mode 100644
index 9735854..0000000
--- a/arch/um/sys-x86_64/user-offsets.c
+++ /dev/null
@@ -1,65 +0,0 @@
-#include <stdio.h>
-#include <stddef.h>
-#include <signal.h>
-#include <sys/poll.h>
-#include <sys/mman.h>
-#include <sys/user.h>
-#define __FRAME_OFFSETS
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define DEFINE_LONGS(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
-
-#define OFFSET(sym, str, mem) \
- DEFINE(sym, offsetof(struct str, mem));
-
-void foo(void)
-{
- OFFSET(HOST_SC_CR2, sigcontext, cr2);
- OFFSET(HOST_SC_ERR, sigcontext, err);
- OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
-
- DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
- DEFINE_LONGS(HOST_RBX, RBX);
- DEFINE_LONGS(HOST_RCX, RCX);
- DEFINE_LONGS(HOST_RDI, RDI);
- DEFINE_LONGS(HOST_RSI, RSI);
- DEFINE_LONGS(HOST_RDX, RDX);
- DEFINE_LONGS(HOST_RBP, RBP);
- DEFINE_LONGS(HOST_RAX, RAX);
- DEFINE_LONGS(HOST_R8, R8);
- DEFINE_LONGS(HOST_R9, R9);
- DEFINE_LONGS(HOST_R10, R10);
- DEFINE_LONGS(HOST_R11, R11);
- DEFINE_LONGS(HOST_R12, R12);
- DEFINE_LONGS(HOST_R13, R13);
- DEFINE_LONGS(HOST_R14, R14);
- DEFINE_LONGS(HOST_R15, R15);
- DEFINE_LONGS(HOST_ORIG_RAX, ORIG_RAX);
- DEFINE_LONGS(HOST_CS, CS);
- DEFINE_LONGS(HOST_SS, SS);
- DEFINE_LONGS(HOST_EFLAGS, EFLAGS);
-#if 0
- DEFINE_LONGS(HOST_FS, FS);
- DEFINE_LONGS(HOST_GS, GS);
- DEFINE_LONGS(HOST_DS, DS);
- DEFINE_LONGS(HOST_ES, ES);
-#endif
-
- DEFINE_LONGS(HOST_IP, RIP);
- DEFINE_LONGS(HOST_SP, RSP);
- DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
-
- /* XXX Duplicated between i386 and x86_64 */
- DEFINE(UM_POLLIN, POLLIN);
- DEFINE(UM_POLLPRI, POLLPRI);
- DEFINE(UM_POLLOUT, POLLOUT);
-
- DEFINE(UM_PROT_READ, PROT_READ);
- DEFINE(UM_PROT_WRITE, PROT_WRITE);
- DEFINE(UM_PROT_EXEC, PROT_EXEC);
-}
diff --git a/arch/um/Makefile-i386 b/arch/x86/Makefile.um
similarity index 64%
rename from arch/um/Makefile-i386
rename to arch/x86/Makefile.um
index 302cbe5..36ddec6 100644
--- a/arch/um/Makefile-i386
+++ b/arch/x86/Makefile.um
@@ -1,14 +1,11 @@
-core-y += arch/um/sys-i386/ arch/x86/crypto/
+core-y += arch/x86/crypto/
-TOP_ADDR := $(CONFIG_TOP_ADDR)
-
+ifeq ($(CONFIG_X86_32),y)
START := 0x8048000
LDFLAGS += -m elf_i386
-ELF_ARCH := $(SUBARCH)
-ELF_FORMAT := elf32-$(SUBARCH)
-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-HEADER_ARCH := x86
+ELF_ARCH := i386
+ELF_FORMAT := elf32-i386
CHECKFLAGS += -D__i386__
ifeq ("$(origin SUBARCH)", "command line")
@@ -16,9 +13,8 @@
KBUILD_CFLAGS += $(call cc-option,-m32)
KBUILD_AFLAGS += $(call cc-option,-m32)
LINK-y += $(call cc-option,-m32)
-UML_OBJCOPYFLAGS += -F $(ELF_FORMAT)
-export LDFLAGS HOSTCFLAGS HOSTLDFLAGS UML_OBJCOPYFLAGS
+export LDFLAGS
endif
endif
@@ -40,3 +36,26 @@
else echo $(call cc-option,-funit-at-a-time); fi ;)
KBUILD_CFLAGS += $(cflags-y)
+
+else
+
+START := 0x60000000
+
+KBUILD_CFLAGS += -fno-builtin -m64
+
+CHECKFLAGS += -m64 -D__x86_64__
+KBUILD_AFLAGS += -m64
+LDFLAGS += -m elf_x86_64
+KBUILD_CPPFLAGS += -m64
+
+ELF_ARCH := i386:x86-64
+ELF_FORMAT := elf64-x86-64
+
+# Not on all 64-bit distros /lib is a symlink to /lib64. PLD is an example.
+
+LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64
+LINK-y += -m64
+
+# Do unit-at-a-time unconditionally on x86_64, following the host
+KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
+endif
diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h
index 29f6679..4420993 100644
--- a/arch/x86/include/asm/intel_scu_ipc.h
+++ b/arch/x86/include/asm/intel_scu_ipc.h
@@ -1,6 +1,8 @@
#ifndef _ASM_X86_INTEL_SCU_IPC_H_
#define _ASM_X86_INTEL_SCU_IPC_H_
+#include <linux/notifier.h>
+
#define IPCMSG_VRTC 0xFA /* Set vRTC device */
/* Command id associated with message IPCMSG_VRTC */
@@ -44,4 +46,24 @@
/* Update FW version */
int intel_scu_ipc_fw_update(u8 *buffer, u32 length);
+extern struct blocking_notifier_head intel_scu_notifier;
+
+static inline void intel_scu_notifier_add(struct notifier_block *nb)
+{
+ blocking_notifier_chain_register(&intel_scu_notifier, nb);
+}
+
+static inline void intel_scu_notifier_remove(struct notifier_block *nb)
+{
+ blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
+}
+
+static inline int intel_scu_notifier_post(unsigned long v, void *p)
+{
+ return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
+}
+
+#define SCU_AVAILABLE 1
+#define SCU_DOWN 2
+
#endif
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 7b5063a..864830e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -36,7 +36,6 @@
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/debugfs.h>
-#include <linux/edac_mce.h>
#include <linux/irq_work.h>
#include <asm/processor.h>
@@ -144,23 +143,20 @@
void mce_log(struct mce *mce)
{
unsigned next, entry;
+ int ret = 0;
/* Emit the trace record: */
trace_mce_record(mce);
+ ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
+ if (ret == NOTIFY_STOP)
+ return;
+
mce->finished = 0;
wmb();
for (;;) {
entry = rcu_dereference_check_mce(mcelog.next);
for (;;) {
- /*
- * If edac_mce is enabled, it will check the error type
- * and will process it, if it is a known error.
- * Otherwise, the error will be sent through mcelog
- * interface
- */
- if (edac_mce_parse(mce))
- return;
/*
* When the buffer fills up discard new entries.
@@ -556,10 +552,8 @@
* Don't get the IP here because it's unlikely to
* have anything to do with the actual error location.
*/
- if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
+ if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce)
mce_log(&m);
- atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m);
- }
/*
* Clear state for this bank.
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index dbe34b9..ea30585 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -108,16 +108,6 @@
SetPageReferenced(page);
}
-static inline void get_huge_page_tail(struct page *page)
-{
- /*
- * __split_huge_page_refcount() cannot run
- * from under us.
- */
- VM_BUG_ON(atomic_read(&page->_count) < 0);
- atomic_inc(&page->_count);
-}
-
static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
unsigned long end, int write, struct page **pages, int *nr)
{
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index e637952..6ed7afd 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -26,6 +26,8 @@
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/mfd/intel_msic.h>
#include <asm/setup.h>
#include <asm/mpspec_def.h>
@@ -483,6 +485,128 @@
return NULL;
}
+static struct resource msic_resources[] = {
+ {
+ .start = INTEL_MSIC_IRQ_PHYS_BASE,
+ .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct intel_msic_platform_data msic_pdata;
+
+static struct platform_device msic_device = {
+ .name = "intel_msic",
+ .id = -1,
+ .dev = {
+ .platform_data = &msic_pdata,
+ },
+ .num_resources = ARRAY_SIZE(msic_resources),
+ .resource = msic_resources,
+};
+
+static inline bool mrst_has_msic(void)
+{
+ return mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL;
+}
+
+static int msic_scu_status_change(struct notifier_block *nb,
+ unsigned long code, void *data)
+{
+ if (code == SCU_DOWN) {
+ platform_device_unregister(&msic_device);
+ return 0;
+ }
+
+ return platform_device_register(&msic_device);
+}
+
+static int __init msic_init(void)
+{
+ static struct notifier_block msic_scu_notifier = {
+ .notifier_call = msic_scu_status_change,
+ };
+
+ /*
+ * We need to be sure that the SCU IPC is ready before MSIC device
+ * can be registered.
+ */
+ if (mrst_has_msic())
+ intel_scu_notifier_add(&msic_scu_notifier);
+
+ return 0;
+}
+arch_initcall(msic_init);
+
+/*
+ * msic_generic_platform_data - sets generic platform data for the block
+ * @info: pointer to the SFI device table entry for this block
+ * @block: MSIC block
+ *
+ * Function sets IRQ number from the SFI table entry for given device to
+ * the MSIC platform data.
+ */
+static void *msic_generic_platform_data(void *info, enum intel_msic_block block)
+{
+ struct sfi_device_table_entry *entry = info;
+
+ BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST);
+ msic_pdata.irq[block] = entry->irq;
+
+ return no_platform_data(info);
+}
+
+static void *msic_battery_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY);
+}
+
+static void *msic_gpio_platform_data(void *info)
+{
+ static struct intel_msic_gpio_pdata pdata;
+ int gpio = get_gpio_by_name("msic_gpio_base");
+
+ if (gpio < 0)
+ return NULL;
+
+ pdata.gpio_base = gpio;
+ msic_pdata.gpio = &pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO);
+}
+
+static void *msic_audio_platform_data(void *info)
+{
+ struct platform_device *pdev;
+
+ pdev = platform_device_register_simple("sst-platform", -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ pr_err("failed to create audio platform device\n");
+ return NULL;
+ }
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO);
+}
+
+static void *msic_power_btn_platform_data(void *info)
+{
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN);
+}
+
+static void *msic_ocd_platform_data(void *info)
+{
+ static struct intel_msic_ocd_pdata pdata;
+ int gpio = get_gpio_by_name("ocd_gpio");
+
+ if (gpio < 0)
+ return NULL;
+
+ pdata.gpio = gpio;
+ msic_pdata.ocd = &pdata;
+
+ return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD);
+}
+
static const struct devs_id __initconst device_ids[] = {
{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
@@ -491,7 +615,14 @@
{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
- {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+
+ /* MSIC subdevices */
+ {"msic_battery", SFI_DEV_TYPE_IPC, 1, &msic_battery_platform_data},
+ {"msic_gpio", SFI_DEV_TYPE_IPC, 1, &msic_gpio_platform_data},
+ {"msic_audio", SFI_DEV_TYPE_IPC, 1, &msic_audio_platform_data},
+ {"msic_power_btn", SFI_DEV_TYPE_IPC, 1, &msic_power_btn_platform_data},
+ {"msic_ocd", SFI_DEV_TYPE_IPC, 1, &msic_ocd_platform_data},
+
{},
};
@@ -558,6 +689,9 @@
i2c_devs[i2c_next_dev++] = new_dev;
}
+BLOCKING_NOTIFIER_HEAD(intel_scu_notifier);
+EXPORT_SYMBOL_GPL(intel_scu_notifier);
+
/* Called by IPC driver */
void intel_scu_devices_create(void)
{
@@ -582,6 +716,7 @@
} else
i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
}
+ intel_scu_notifier_post(SCU_AVAILABLE, 0L);
}
EXPORT_SYMBOL_GPL(intel_scu_devices_create);
@@ -590,6 +725,8 @@
{
int i;
+ intel_scu_notifier_post(SCU_DOWN, 0L);
+
for (i = 0; i < ipc_next_dev; i++)
platform_device_del(ipc_devs[i]);
}
@@ -606,19 +743,37 @@
platform_device_add_resources(pdev, &res, 1);
}
-static void __init sfi_handle_ipc_dev(struct platform_device *pdev)
+static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *entry)
{
const struct devs_id *dev = device_ids;
+ struct platform_device *pdev;
void *pdata = NULL;
while (dev->name[0]) {
if (dev->type == SFI_DEV_TYPE_IPC &&
- !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) {
- pdata = dev->get_platform_data(pdev);
+ !strncmp(dev->name, entry->name, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(entry);
break;
}
dev++;
}
+
+ /*
+ * On Medfield the platform device creation is handled by the MSIC
+ * MFD driver so we don't need to do it here.
+ */
+ if (mrst_has_msic())
+ return;
+
+ /* ID as IRQ is a hack that will go away */
+ pdev = platform_device_alloc(entry->name, entry->irq);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ entry->name);
+ return;
+ }
+ install_irq_resource(pdev, entry->irq);
+
pdev->dev.platform_data = pdata;
intel_scu_device_register(pdev);
}
@@ -671,7 +826,6 @@
struct sfi_device_table_entry *pentry;
struct spi_board_info spi_info;
struct i2c_board_info i2c_info;
- struct platform_device *pdev;
int num, i, bus;
int ioapic;
struct io_apic_irq_attr irq_attr;
@@ -699,17 +853,9 @@
switch (pentry->type) {
case SFI_DEV_TYPE_IPC:
- /* ID as IRQ is a hack that will go away */
- pdev = platform_device_alloc(pentry->name, irq);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- continue;
- }
- install_irq_resource(pdev, irq);
pr_debug("info[%2d]: IPC bus, name = %16.16s, "
- "irq = 0x%2x\n", i, pentry->name, irq);
- sfi_handle_ipc_dev(pdev);
+ "irq = 0x%2x\n", i, pentry->name, pentry->irq);
+ sfi_handle_ipc_dev(pentry);
break;
case SFI_DEV_TYPE_SPI:
memset(&spi_info, 0, sizeof(spi_info));
diff --git a/arch/um/Kconfig.x86 b/arch/x86/um/Kconfig
similarity index 100%
rename from arch/um/Kconfig.x86
rename to arch/x86/um/Kconfig
diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
new file mode 100644
index 0000000..8fb5840
--- /dev/null
+++ b/arch/x86/um/Makefile
@@ -0,0 +1,45 @@
+#
+# Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+#
+
+ifeq ($(CONFIG_X86_32),y)
+ BITS := 32
+else
+ BITS := 64
+endif
+
+obj-y = bug.o bugs_$(BITS).o delay.o fault.o ksyms.o ldt.o \
+ ptrace_$(BITS).o ptrace_user.o setjmp_$(BITS).o signal.o \
+ stub_$(BITS).o stub_segv.o syscalls_$(BITS).o \
+ sys_call_table_$(BITS).o sysrq_$(BITS).o tls_$(BITS).o \
+ mem_$(BITS).o subarch.o os-$(OS)/
+
+ifeq ($(CONFIG_X86_32),y)
+
+obj-y += checksum_32.o
+obj-$(CONFIG_BINFMT_ELF) += elfcore.o
+
+subarch-y = ../lib/string_32.o ../lib/atomic64_32.o ../lib/atomic64_cx8_32.o
+subarch-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += ../lib/rwsem.o
+subarch-$(CONFIG_HIGHMEM) += ../mm/highmem_32.o
+
+else
+
+obj-y += vdso/
+
+subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../lib/thunk_64.o \
+ ../lib/rwsem.o
+
+endif
+
+subarch-$(CONFIG_MODULES) += ../kernel/module.o
+
+USER_OBJS := bugs_$(BITS).o ptrace_user.o fault.o
+
+extra-y += user-offsets.s
+$(obj)/user-offsets.s: c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS)
+
+UNPROFILE_OBJS := stub_segv.o
+CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
+
+include arch/um/scripts/Makefile.rules
diff --git a/arch/um/include/asm/apic.h b/arch/x86/um/asm/apic.h
similarity index 100%
rename from arch/um/include/asm/apic.h
rename to arch/x86/um/asm/apic.h
diff --git a/arch/um/include/asm/arch_hweight.h b/arch/x86/um/asm/arch_hweight.h
similarity index 100%
rename from arch/um/include/asm/arch_hweight.h
rename to arch/x86/um/asm/arch_hweight.h
diff --git a/arch/um/sys-i386/asm/archparam.h b/arch/x86/um/asm/archparam.h
similarity index 62%
rename from arch/um/sys-i386/asm/archparam.h
rename to arch/x86/um/asm/archparam.h
index 2a18a88..c17cf68 100644
--- a/arch/um/sys-i386/asm/archparam.h
+++ b/arch/x86/um/asm/archparam.h
@@ -1,10 +1,13 @@
/*
* Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
* Licensed under the GPL
*/
-#ifndef __UM_ARCHPARAM_I386_H
-#define __UM_ARCHPARAM_I386_H
+#ifndef __UM_ARCHPARAM_H
+#define __UM_ARCHPARAM_H
+
+#ifdef CONFIG_X86_32
#ifdef CONFIG_X86_PAE
#define LAST_PKMAP 512
@@ -14,3 +17,4 @@
#endif
+#endif
diff --git a/arch/x86/um/asm/checksum.h b/arch/x86/um/asm/checksum.h
new file mode 100644
index 0000000..b6efe23
--- /dev/null
+++ b/arch/x86/um/asm/checksum.h
@@ -0,0 +1,10 @@
+#ifndef __UM_CHECKSUM_H
+#define __UM_CHECKSUM_H
+
+#ifdef CONFIG_X86_32
+# include "checksum_32.h"
+#else
+# include "checksum_64.h"
+#endif
+
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/checksum.h b/arch/x86/um/asm/checksum_32.h
similarity index 99%
rename from arch/um/sys-i386/shared/sysdep/checksum.h
rename to arch/x86/um/asm/checksum_32.h
index ed47445..caab742 100644
--- a/arch/um/sys-i386/shared/sysdep/checksum.h
+++ b/arch/x86/um/asm/checksum_32.h
@@ -1,4 +1,4 @@
-/*
+/*
* Licensed under the GPL
*/
diff --git a/arch/um/sys-x86_64/shared/sysdep/checksum.h b/arch/x86/um/asm/checksum_64.h
similarity index 100%
rename from arch/um/sys-x86_64/shared/sysdep/checksum.h
rename to arch/x86/um/asm/checksum_64.h
diff --git a/arch/um/include/asm/desc.h b/arch/x86/um/asm/desc.h
similarity index 100%
rename from arch/um/include/asm/desc.h
rename to arch/x86/um/asm/desc.h
diff --git a/arch/x86/um/asm/elf.h b/arch/x86/um/asm/elf.h
new file mode 100644
index 0000000..f3b0633
--- /dev/null
+++ b/arch/x86/um/asm/elf.h
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+#ifndef __UM_ELF_X86_H
+#define __UM_ELF_X86_H
+
+#include <asm/user.h>
+#include "skas.h"
+
+#ifdef CONFIG_X86_32
+
+#define R_386_NONE 0
+#define R_386_32 1
+#define R_386_PC32 2
+#define R_386_GOT32 3
+#define R_386_PLT32 4
+#define R_386_COPY 5
+#define R_386_GLOB_DAT 6
+#define R_386_JMP_SLOT 7
+#define R_386_RELATIVE 8
+#define R_386_GOTOFF 9
+#define R_386_GOTPC 10
+#define R_386_NUM 11
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
+
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_386
+
+#define ELF_PLAT_INIT(regs, load_addr) do { \
+ PT_REGS_EBX(regs) = 0; \
+ PT_REGS_ECX(regs) = 0; \
+ PT_REGS_EDX(regs) = 0; \
+ PT_REGS_ESI(regs) = 0; \
+ PT_REGS_EDI(regs) = 0; \
+ PT_REGS_EBP(regs) = 0; \
+ PT_REGS_EAX(regs) = 0; \
+} while (0)
+
+/* Shamelessly stolen from include/asm-i386/elf.h */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
+ pr_reg[0] = PT_REGS_EBX(regs); \
+ pr_reg[1] = PT_REGS_ECX(regs); \
+ pr_reg[2] = PT_REGS_EDX(regs); \
+ pr_reg[3] = PT_REGS_ESI(regs); \
+ pr_reg[4] = PT_REGS_EDI(regs); \
+ pr_reg[5] = PT_REGS_EBP(regs); \
+ pr_reg[6] = PT_REGS_EAX(regs); \
+ pr_reg[7] = PT_REGS_DS(regs); \
+ pr_reg[8] = PT_REGS_ES(regs); \
+ /* fake once used fs and gs selectors? */ \
+ pr_reg[9] = PT_REGS_DS(regs); \
+ pr_reg[10] = PT_REGS_DS(regs); \
+ pr_reg[11] = PT_REGS_SYSCALL_NR(regs); \
+ pr_reg[12] = PT_REGS_IP(regs); \
+ pr_reg[13] = PT_REGS_CS(regs); \
+ pr_reg[14] = PT_REGS_EFLAGS(regs); \
+ pr_reg[15] = PT_REGS_SP(regs); \
+ pr_reg[16] = PT_REGS_SS(regs); \
+} while (0);
+
+extern char * elf_aux_platform;
+#define ELF_PLATFORM (elf_aux_platform)
+
+extern unsigned long vsyscall_ehdr;
+extern unsigned long vsyscall_end;
+extern unsigned long __kernel_vsyscall;
+
+/*
+ * This is the range that is readable by user mode, and things
+ * acting like user mode such as get_user_pages.
+ */
+#define FIXADDR_USER_START vsyscall_ehdr
+#define FIXADDR_USER_END vsyscall_end
+
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them, start the x86-specific ones at 32.
+ */
+#define AT_SYSINFO 32
+#define AT_SYSINFO_EHDR 33
+
+#define ARCH_DLINFO \
+do { \
+ if ( vsyscall_ehdr ) { \
+ NEW_AUX_ENT(AT_SYSINFO, __kernel_vsyscall); \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, vsyscall_ehdr); \
+ } \
+} while (0)
+
+#else
+
+/* x86-64 relocation types, taken from asm-x86_64/elf.h */
+#define R_X86_64_NONE 0 /* No reloc */
+#define R_X86_64_64 1 /* Direct 64 bit */
+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
+#define R_X86_64_PLT32 4 /* 32 bit PLT address */
+#define R_X86_64_COPY 5 /* Copy symbol at runtime */
+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
+#define R_X86_64_RELATIVE 8 /* Adjust by program base */
+#define R_X86_64_GOTPCREL 9 /* 32 bit signed pc relative
+ offset to GOT */
+#define R_X86_64_32 10 /* Direct 32 bit zero extended */
+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
+#define R_X86_64_16 12 /* Direct 16 bit zero extended */
+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
+#define R_X86_64_8 14 /* Direct 8 bit sign extended */
+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
+
+#define R_X86_64_NUM 16
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ ((x)->e_machine == EM_X86_64)
+
+#define ELF_CLASS ELFCLASS64
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_X86_64
+
+#define ELF_PLAT_INIT(regs, load_addr) do { \
+ PT_REGS_RBX(regs) = 0; \
+ PT_REGS_RCX(regs) = 0; \
+ PT_REGS_RDX(regs) = 0; \
+ PT_REGS_RSI(regs) = 0; \
+ PT_REGS_RDI(regs) = 0; \
+ PT_REGS_RBP(regs) = 0; \
+ PT_REGS_RAX(regs) = 0; \
+ PT_REGS_R8(regs) = 0; \
+ PT_REGS_R9(regs) = 0; \
+ PT_REGS_R10(regs) = 0; \
+ PT_REGS_R11(regs) = 0; \
+ PT_REGS_R12(regs) = 0; \
+ PT_REGS_R13(regs) = 0; \
+ PT_REGS_R14(regs) = 0; \
+ PT_REGS_R15(regs) = 0; \
+} while (0)
+
+#define ELF_CORE_COPY_REGS(pr_reg, _regs) \
+ (pr_reg)[0] = (_regs)->regs.gp[0]; \
+ (pr_reg)[1] = (_regs)->regs.gp[1]; \
+ (pr_reg)[2] = (_regs)->regs.gp[2]; \
+ (pr_reg)[3] = (_regs)->regs.gp[3]; \
+ (pr_reg)[4] = (_regs)->regs.gp[4]; \
+ (pr_reg)[5] = (_regs)->regs.gp[5]; \
+ (pr_reg)[6] = (_regs)->regs.gp[6]; \
+ (pr_reg)[7] = (_regs)->regs.gp[7]; \
+ (pr_reg)[8] = (_regs)->regs.gp[8]; \
+ (pr_reg)[9] = (_regs)->regs.gp[9]; \
+ (pr_reg)[10] = (_regs)->regs.gp[10]; \
+ (pr_reg)[11] = (_regs)->regs.gp[11]; \
+ (pr_reg)[12] = (_regs)->regs.gp[12]; \
+ (pr_reg)[13] = (_regs)->regs.gp[13]; \
+ (pr_reg)[14] = (_regs)->regs.gp[14]; \
+ (pr_reg)[15] = (_regs)->regs.gp[15]; \
+ (pr_reg)[16] = (_regs)->regs.gp[16]; \
+ (pr_reg)[17] = (_regs)->regs.gp[17]; \
+ (pr_reg)[18] = (_regs)->regs.gp[18]; \
+ (pr_reg)[19] = (_regs)->regs.gp[19]; \
+ (pr_reg)[20] = (_regs)->regs.gp[20]; \
+ (pr_reg)[21] = current->thread.arch.fs; \
+ (pr_reg)[22] = 0; \
+ (pr_reg)[23] = 0; \
+ (pr_reg)[24] = 0; \
+ (pr_reg)[25] = 0; \
+ (pr_reg)[26] = 0;
+
+#define ELF_PLATFORM "x86_64"
+
+/* No user-accessible fixmap addresses, i.e. vsyscall */
+#define FIXADDR_USER_START 0
+#define FIXADDR_USER_END 0
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int uses_interp);
+
+extern unsigned long um_vdso_addr;
+#define AT_SYSINFO_EHDR 33
+#define ARCH_DLINFO NEW_AUX_ENT(AT_SYSINFO_EHDR, um_vdso_addr)
+
+#endif
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_i387_struct elf_fpregset_t;
+
+#define task_pt_regs(t) (&(t)->thread.regs)
+
+struct task_struct;
+
+extern int elf_core_copy_fpregs(struct task_struct *t, elf_fpregset_t *fpu);
+
+#define ELF_CORE_COPY_FPREGS(t, fpu) elf_core_copy_fpregs(t, fpu)
+
+#define ELF_EXEC_PAGESIZE 4096
+
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3)
+
+extern long elf_aux_hwcap;
+#define ELF_HWCAP (elf_aux_hwcap)
+
+#define SET_PERSONALITY(ex) do ; while(0)
+#define __HAVE_ARCH_GATE_AREA 1
+
+#endif
diff --git a/arch/um/include/asm/irq_vectors.h b/arch/x86/um/asm/irq_vectors.h
similarity index 100%
rename from arch/um/include/asm/irq_vectors.h
rename to arch/x86/um/asm/irq_vectors.h
diff --git a/arch/x86/um/asm/mm_context.h b/arch/x86/um/asm/mm_context.h
new file mode 100644
index 0000000..4a73d63
--- /dev/null
+++ b/arch/x86/um/asm/mm_context.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2004 Fujitsu Siemens Computers GmbH
+ * Licensed under the GPL
+ *
+ * Author: Bodo Stroesser <bstroesser@fujitsu-siemens.com>
+ */
+
+#ifndef __ASM_LDT_H
+#define __ASM_LDT_H
+
+#include <linux/mutex.h>
+#include <asm/ldt.h>
+
+extern void ldt_host_info(void);
+
+#define LDT_PAGES_MAX \
+ ((LDT_ENTRIES * LDT_ENTRY_SIZE)/PAGE_SIZE)
+#define LDT_ENTRIES_PER_PAGE \
+ (PAGE_SIZE/LDT_ENTRY_SIZE)
+#define LDT_DIRECT_ENTRIES \
+ ((LDT_PAGES_MAX*sizeof(void *))/LDT_ENTRY_SIZE)
+
+struct ldt_entry {
+ __u32 a;
+ __u32 b;
+};
+
+typedef struct uml_ldt {
+ int entry_count;
+ struct mutex lock;
+ union {
+ struct ldt_entry * pages[LDT_PAGES_MAX];
+ struct ldt_entry entries[LDT_DIRECT_ENTRIES];
+ } u;
+} uml_ldt_t;
+
+#define LDT_entry_a(info) \
+ ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
+
+#define LDT_entry_b(info) \
+ (((info)->base_addr & 0xff000000) | \
+ (((info)->base_addr & 0x00ff0000) >> 16) | \
+ ((info)->limit & 0xf0000) | \
+ (((info)->read_exec_only ^ 1) << 9) | \
+ ((info)->contents << 10) | \
+ (((info)->seg_not_present ^ 1) << 15) | \
+ ((info)->seg_32bit << 22) | \
+ ((info)->limit_in_pages << 23) | \
+ ((info)->useable << 20) | \
+ 0x7000)
+
+#define _LDT_empty(info) (\
+ (info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0 )
+
+#ifdef CONFIG_X86_64
+#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
+#else
+#define LDT_empty(info) (_LDT_empty(info))
+#endif
+
+struct uml_arch_mm_context {
+ uml_ldt_t ldt;
+};
+
+#endif
diff --git a/arch/x86/um/asm/module.h b/arch/x86/um/asm/module.h
new file mode 100644
index 0000000..61af80e
--- /dev/null
+++ b/arch/x86/um/asm/module.h
@@ -0,0 +1,23 @@
+#ifndef __UM_MODULE_H
+#define __UM_MODULE_H
+
+/* UML is simple */
+struct mod_arch_specific
+{
+};
+
+#ifdef CONFIG_X86_32
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#else
+
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+
+#endif
+
+#endif
diff --git a/arch/x86/um/asm/processor.h b/arch/x86/um/asm/processor.h
new file mode 100644
index 0000000..118c143
--- /dev/null
+++ b/arch/x86/um/asm/processor.h
@@ -0,0 +1,22 @@
+#ifndef __UM_PROCESSOR_H
+#define __UM_PROCESSOR_H
+
+/* include faultinfo structure */
+#include <sysdep/faultinfo.h>
+
+#ifdef CONFIG_X86_32
+# include "processor_32.h"
+#else
+# include "processor_64.h"
+#endif
+
+#define KSTK_EIP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_ESP(tsk) KSTK_REG(tsk, HOST_IP)
+#define KSTK_EBP(tsk) KSTK_REG(tsk, HOST_BP)
+
+#define ARCH_IS_STACKGROW(address) \
+ (address + 65536 + 32 * sizeof(unsigned long) >= UPT_SP(¤t->thread.regs.regs))
+
+#include <asm/processor-generic.h>
+
+#endif
diff --git a/arch/um/sys-i386/asm/processor.h b/arch/x86/um/asm/processor_32.h
similarity index 77%
rename from arch/um/sys-i386/asm/processor.h
rename to arch/x86/um/asm/processor_32.h
index 82a9061..018f732 100644
--- a/arch/um/sys-i386/asm/processor.h
+++ b/arch/x86/um/asm/processor_32.h
@@ -6,15 +6,12 @@
#ifndef __UM_PROCESSOR_I386_H
#define __UM_PROCESSOR_I386_H
-#include "linux/string.h"
-#include <sysdep/host_ldt.h>
-#include "asm/segment.h"
+#include <linux/string.h>
+#include <asm/segment.h>
+#include <asm/ldt.h>
extern int host_has_cmov;
-/* include faultinfo structure */
-#include "sysdep/faultinfo.h"
-
struct uml_tls_struct {
struct user_desc tls;
unsigned flushed:1;
@@ -66,13 +63,4 @@
#define current_text_addr() \
({ void *pc; __asm__("movl $1f,%0\n1:":"=g" (pc)); pc; })
-#define ARCH_IS_STACKGROW(address) \
- (address + 32 >= UPT_SP(¤t->thread.regs.regs))
-
-#define KSTK_EIP(tsk) KSTK_REG(tsk, EIP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, UESP)
-#define KSTK_EBP(tsk) KSTK_REG(tsk, EBP)
-
-#include "asm/processor-generic.h"
-
#endif
diff --git a/arch/um/sys-x86_64/asm/processor.h b/arch/x86/um/asm/processor_64.h
similarity index 76%
rename from arch/um/sys-x86_64/asm/processor.h
rename to arch/x86/um/asm/processor_64.h
index 875a26a..61de92d 100644
--- a/arch/um/sys-x86_64/asm/processor.h
+++ b/arch/x86/um/asm/processor_64.h
@@ -7,9 +7,6 @@
#ifndef __UM_PROCESSOR_X86_64_H
#define __UM_PROCESSOR_X86_64_H
-/* include faultinfo structure */
-#include "sysdep/faultinfo.h"
-
struct arch_thread {
unsigned long debugregs[8];
int debugregs_seq;
@@ -45,12 +42,4 @@
#define current_text_addr() \
({ void *pc; __asm__("movq $1f,%0\n1:":"=g" (pc)); pc; })
-#define ARCH_IS_STACKGROW(address) \
- (address + 128 >= UPT_SP(¤t->thread.regs.regs))
-
-#define KSTK_EIP(tsk) KSTK_REG(tsk, RIP)
-#define KSTK_ESP(tsk) KSTK_REG(tsk, RSP)
-
-#include "asm/processor-generic.h"
-
#endif
diff --git a/arch/x86/um/asm/ptrace.h b/arch/x86/um/asm/ptrace.h
new file mode 100644
index 0000000..c8aca8c
--- /dev/null
+++ b/arch/x86/um/asm/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_X86_32
+# include "ptrace_32.h"
+#else
+# include "ptrace_64.h"
+#endif
diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/x86/um/asm/ptrace_32.h
similarity index 100%
rename from arch/um/sys-i386/asm/ptrace.h
rename to arch/x86/um/asm/ptrace_32.h
diff --git a/arch/um/sys-x86_64/asm/ptrace.h b/arch/x86/um/asm/ptrace_64.h
similarity index 97%
rename from arch/um/sys-x86_64/asm/ptrace.h
rename to arch/x86/um/asm/ptrace_64.h
index 83d8c47..706a0d8 100644
--- a/arch/um/sys-x86_64/asm/ptrace.h
+++ b/arch/x86/um/asm/ptrace_64.h
@@ -40,7 +40,7 @@
#define PT_REGS_ORIG_RAX(r) UPT_ORIG_RAX(&(r)->regs)
#define PT_REGS_RIP(r) UPT_IP(&(r)->regs)
-#define PT_REGS_RSP(r) UPT_SP(&(r)->regs)
+#define PT_REGS_SP(r) UPT_SP(&(r)->regs)
#define PT_REGS_EFLAGS(r) UPT_EFLAGS(&(r)->regs)
diff --git a/arch/um/include/asm/required-features.h b/arch/x86/um/asm/required-features.h
similarity index 100%
rename from arch/um/include/asm/required-features.h
rename to arch/x86/um/asm/required-features.h
diff --git a/arch/um/include/asm/segment.h b/arch/x86/um/asm/segment.h
similarity index 100%
rename from arch/um/include/asm/segment.h
rename to arch/x86/um/asm/segment.h
diff --git a/arch/um/sys-i386/shared/sysdep/system.h b/arch/x86/um/asm/system.h
similarity index 96%
rename from arch/um/sys-i386/shared/sysdep/system.h
rename to arch/x86/um/asm/system.h
index d1b93c4..a459fd9 100644
--- a/arch/um/sys-i386/shared/sysdep/system.h
+++ b/arch/x86/um/asm/system.h
@@ -129,4 +129,7 @@
alternative(ASM_NOP3, "lfence", X86_FEATURE_LFENCE_RDTSC);
}
+extern void *_switch_to(void *prev, void *next, void *last);
+#define switch_to(prev, next, last) prev = _switch_to(prev, next, last)
+
#endif
diff --git a/arch/x86/um/asm/vm-flags.h b/arch/x86/um/asm/vm-flags.h
new file mode 100644
index 0000000..7c297e9
--- /dev/null
+++ b/arch/x86/um/asm/vm-flags.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright 2003 PathScale, Inc.
+ * Licensed under the GPL
+ */
+
+#ifndef __VM_FLAGS_X86_H
+#define __VM_FLAGS_X86_H
+
+#ifdef CONFIG_X86_32
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#else
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_STACK_DEFAULT_FLAGS (VM_GROWSDOWN | VM_READ | VM_WRITE | \
+ VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif
+#endif
diff --git a/arch/um/sys-x86_64/bug.c b/arch/x86/um/bug.c
similarity index 100%
rename from arch/um/sys-x86_64/bug.c
rename to arch/x86/um/bug.c
diff --git a/arch/um/sys-i386/bugs.c b/arch/x86/um/bugs_32.c
similarity index 93%
rename from arch/um/sys-i386/bugs.c
rename to arch/x86/um/bugs_32.c
index 2c6d0d7..a1fba5f 100644
--- a/arch/um/sys-i386/bugs.c
+++ b/arch/x86/um/bugs_32.c
@@ -4,17 +4,17 @@
*/
#include <signal.h>
-#include "kern_constants.h"
#include "kern_util.h"
#include "longjmp.h"
-#include "task.h"
-#include "user.h"
#include "sysdep/ptrace.h"
+#include <generated/asm-offsets.h>
/* Set during early boot */
static int host_has_cmov = 1;
static jmp_buf cmov_test_return;
+#define TASK_PID(task) *((int *) &(((char *) (task))[HOST_TASK_PID]))
+
static void cmov_sigill_test_handler(int sig)
{
host_has_cmov = 0;
diff --git a/arch/um/sys-x86_64/bugs.c b/arch/x86/um/bugs_64.c
similarity index 100%
rename from arch/um/sys-x86_64/bugs.c
rename to arch/x86/um/bugs_64.c
diff --git a/arch/um/sys-i386/checksum.S b/arch/x86/um/checksum_32.S
similarity index 100%
rename from arch/um/sys-i386/checksum.S
rename to arch/x86/um/checksum_32.S
diff --git a/arch/um/sys-i386/delay.c b/arch/x86/um/delay.c
similarity index 100%
rename from arch/um/sys-i386/delay.c
rename to arch/x86/um/delay.c
diff --git a/arch/um/sys-i386/elfcore.c b/arch/x86/um/elfcore.c
similarity index 100%
rename from arch/um/sys-i386/elfcore.c
rename to arch/x86/um/elfcore.c
diff --git a/arch/um/sys-i386/fault.c b/arch/x86/um/fault.c
similarity index 100%
rename from arch/um/sys-i386/fault.c
rename to arch/x86/um/fault.c
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/x86/um/ksyms.c
similarity index 90%
rename from arch/um/sys-x86_64/ksyms.c
rename to arch/x86/um/ksyms.c
index 1db2fce..2e8f43e 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/x86/um/ksyms.c
@@ -2,10 +2,12 @@
#include <asm/string.h>
#include <asm/checksum.h>
+#ifndef CONFIG_X86_32
/*XXX: we need them because they would be exported by x86_64 */
#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
EXPORT_SYMBOL(memcpy);
#else
EXPORT_SYMBOL(__memcpy);
#endif
+#endif
EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-i386/ldt.c b/arch/x86/um/ldt.c
similarity index 92%
rename from arch/um/sys-i386/ldt.c
rename to arch/x86/um/ldt.c
index 3f2bf20..26b0e39 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/x86/um/ldt.c
@@ -137,7 +137,7 @@
{
int i, err = 0;
unsigned long size;
- uml_ldt_t * ldt = ¤t->mm->context.ldt;
+ uml_ldt_t *ldt = ¤t->mm->context.arch.ldt;
if (!ldt->entry_count)
goto out;
@@ -205,7 +205,7 @@
static int write_ldt(void __user * ptr, unsigned long bytecount, int func)
{
- uml_ldt_t * ldt = ¤t->mm->context.ldt;
+ uml_ldt_t *ldt = ¤t->mm->context.arch.ldt;
struct mm_id * mm_idp = ¤t->mm->context.id;
int i, err;
struct user_desc ldt_info;
@@ -397,7 +397,7 @@
if (!ptrace_ldt)
- mutex_init(&new_mm->ldt.lock);
+ mutex_init(&new_mm->arch.ldt.lock);
if (!from_mm) {
memset(&desc, 0, sizeof(desc));
@@ -429,7 +429,7 @@
break;
}
}
- new_mm->ldt.entry_count = 0;
+ new_mm->arch.ldt.entry_count = 0;
goto out;
}
@@ -457,26 +457,26 @@
* i.e., we have to use the stub for modify_ldt, which
* can't handle the big read buffer of up to 64kB.
*/
- mutex_lock(&from_mm->ldt.lock);
- if (from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES)
- memcpy(new_mm->ldt.u.entries, from_mm->ldt.u.entries,
- sizeof(new_mm->ldt.u.entries));
+ mutex_lock(&from_mm->arch.ldt.lock);
+ if (from_mm->arch.ldt.entry_count <= LDT_DIRECT_ENTRIES)
+ memcpy(new_mm->arch.ldt.u.entries, from_mm->arch.ldt.u.entries,
+ sizeof(new_mm->arch.ldt.u.entries));
else {
- i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
+ i = from_mm->arch.ldt.entry_count / LDT_ENTRIES_PER_PAGE;
while (i-->0) {
page = __get_free_page(GFP_KERNEL|__GFP_ZERO);
if (!page) {
err = -ENOMEM;
break;
}
- new_mm->ldt.u.pages[i] =
+ new_mm->arch.ldt.u.pages[i] =
(struct ldt_entry *) page;
- memcpy(new_mm->ldt.u.pages[i],
- from_mm->ldt.u.pages[i], PAGE_SIZE);
+ memcpy(new_mm->arch.ldt.u.pages[i],
+ from_mm->arch.ldt.u.pages[i], PAGE_SIZE);
}
}
- new_mm->ldt.entry_count = from_mm->ldt.entry_count;
- mutex_unlock(&from_mm->ldt.lock);
+ new_mm->arch.ldt.entry_count = from_mm->arch.ldt.entry_count;
+ mutex_unlock(&from_mm->arch.ldt.lock);
}
out:
@@ -488,12 +488,12 @@
{
int i;
- if (!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES) {
- i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
+ if (!ptrace_ldt && mm->arch.ldt.entry_count > LDT_DIRECT_ENTRIES) {
+ i = mm->arch.ldt.entry_count / LDT_ENTRIES_PER_PAGE;
while (i-- > 0)
- free_page((long) mm->ldt.u.pages[i]);
+ free_page((long) mm->arch.ldt.u.pages[i]);
}
- mm->ldt.entry_count = 0;
+ mm->arch.ldt.entry_count = 0;
}
int sys_modify_ldt(int func, void __user *ptr, unsigned long bytecount)
diff --git a/arch/um/sys-i386/mem.c b/arch/x86/um/mem_32.c
similarity index 100%
rename from arch/um/sys-i386/mem.c
rename to arch/x86/um/mem_32.c
diff --git a/arch/um/sys-x86_64/mem.c b/arch/x86/um/mem_64.c
similarity index 100%
rename from arch/um/sys-x86_64/mem.c
rename to arch/x86/um/mem_64.c
diff --git a/arch/um/os-Linux/sys-i386/Makefile b/arch/x86/um/os-Linux/Makefile
similarity index 61%
rename from arch/um/os-Linux/sys-i386/Makefile
rename to arch/x86/um/os-Linux/Makefile
index b4bc6ac..253bfb8 100644
--- a/arch/um/os-Linux/sys-i386/Makefile
+++ b/arch/x86/um/os-Linux/Makefile
@@ -3,7 +3,10 @@
# Licensed under the GPL
#
-obj-y = registers.o signal.o task_size.o tls.o
+obj-y = registers.o task_size.o mcontext.o
+
+obj-$(CONFIG_X86_32) += tls.o
+obj-$(CONFIG_64BIT) += prctl.o
USER_OBJS := $(obj-y)
diff --git a/arch/x86/um/os-Linux/mcontext.c b/arch/x86/um/os-Linux/mcontext.c
new file mode 100644
index 0000000..1d33d72
--- /dev/null
+++ b/arch/x86/um/os-Linux/mcontext.c
@@ -0,0 +1,31 @@
+#include <sys/ucontext.h>
+#define __FRAME_OFFSETS
+#include <asm/ptrace.h>
+#include <sysdep/ptrace.h>
+
+void get_regs_from_mc(struct uml_pt_regs *regs, mcontext_t *mc)
+{
+#ifdef __i386__
+#define COPY2(X,Y) regs->gp[X] = mc->gregs[REG_##Y]
+#define COPY(X) regs->gp[X] = mc->gregs[REG_##X]
+#define COPY_SEG(X) regs->gp[X] = mc->gregs[REG_##X] & 0xffff;
+#define COPY_SEG_CPL3(X) regs->gp[X] = (mc->gregs[REG_##X] & 0xffff) | 3;
+ COPY_SEG(GS); COPY_SEG(FS); COPY_SEG(ES); COPY_SEG(DS);
+ COPY(EDI); COPY(ESI); COPY(EBP);
+ COPY2(UESP, ESP); /* sic */
+ COPY(EBX); COPY(EDX); COPY(ECX); COPY(EAX);
+ COPY(EIP); COPY_SEG_CPL3(CS); COPY(EFL); COPY_SEG_CPL3(SS);
+#else
+#define COPY2(X,Y) regs->gp[X/sizeof(unsigned long)] = mc->gregs[REG_##Y]
+#define COPY(X) regs->gp[X/sizeof(unsigned long)] = mc->gregs[REG_##X]
+ COPY(R8); COPY(R9); COPY(R10); COPY(R11);
+ COPY(R12); COPY(R13); COPY(R14); COPY(R15);
+ COPY(RDI); COPY(RSI); COPY(RBP); COPY(RBX);
+ COPY(RDX); COPY(RAX); COPY(RCX); COPY(RSP);
+ COPY(RIP);
+ COPY2(EFLAGS, EFL);
+ COPY2(CS, CSGSFS);
+ regs->gp[CS / sizeof(unsigned long)] &= 0xffff;
+ regs->gp[CS / sizeof(unsigned long)] |= 3;
+#endif
+}
diff --git a/arch/um/os-Linux/sys-x86_64/prctl.c b/arch/x86/um/os-Linux/prctl.c
similarity index 100%
rename from arch/um/os-Linux/sys-x86_64/prctl.c
rename to arch/x86/um/os-Linux/prctl.c
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/x86/um/os-Linux/registers.c
similarity index 79%
rename from arch/um/os-Linux/sys-i386/registers.c
rename to arch/x86/um/os-Linux/registers.c
index 229f7a5..0cdbb86 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/x86/um/os-Linux/registers.c
@@ -6,10 +6,10 @@
#include <errno.h>
#include <sys/ptrace.h>
+#ifdef __i386__
#include <sys/user.h>
-#include "kern_constants.h"
+#endif
#include "longjmp.h"
-#include "user.h"
#include "sysdep/ptrace_user.h"
int save_fp_registers(int pid, unsigned long *fp_regs)
@@ -26,6 +26,8 @@
return 0;
}
+#ifdef __i386__
+int have_fpx_regs = 1;
int save_fpx_registers(int pid, unsigned long *fp_regs)
{
if (ptrace(PTRACE_GETFPXREGS, pid, 0, fp_regs) < 0)
@@ -40,24 +42,6 @@
return 0;
}
-unsigned long get_thread_reg(int reg, jmp_buf *buf)
-{
- switch (reg) {
- case EIP:
- return buf[0]->__eip;
- case UESP:
- return buf[0]->__esp;
- case EBP:
- return buf[0]->__ebp;
- default:
- printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
- reg);
- return 0;
- }
-}
-
-int have_fpx_regs = 1;
-
int get_fp_registers(int pid, unsigned long *regs)
{
if (have_fpx_regs)
@@ -89,3 +73,41 @@
have_fpx_regs = 0;
}
+#else
+
+int get_fp_registers(int pid, unsigned long *regs)
+{
+ return save_fp_registers(pid, regs);
+}
+
+int put_fp_registers(int pid, unsigned long *regs)
+{
+ return restore_fp_registers(pid, regs);
+}
+
+#endif
+
+unsigned long get_thread_reg(int reg, jmp_buf *buf)
+{
+ switch (reg) {
+#ifdef __i386__
+ case HOST_IP:
+ return buf[0]->__eip;
+ case HOST_SP:
+ return buf[0]->__esp;
+ case HOST_BP:
+ return buf[0]->__ebp;
+#else
+ case HOST_IP:
+ return buf[0]->__rip;
+ case HOST_SP:
+ return buf[0]->__rsp;
+ case HOST_BP:
+ return buf[0]->__rbp;
+#endif
+ default:
+ printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
+ reg);
+ return 0;
+ }
+}
diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/x86/um/os-Linux/task_size.c
similarity index 95%
rename from arch/um/os-Linux/sys-i386/task_size.c
rename to arch/x86/um/os-Linux/task_size.c
index be04c1e..efb16c5 100644
--- a/arch/um/os-Linux/sys-i386/task_size.c
+++ b/arch/x86/um/os-Linux/task_size.c
@@ -3,7 +3,8 @@
#include <signal.h>
#include <sys/mman.h>
#include "longjmp.h"
-#include "kern_constants.h"
+
+#ifdef __i386__
static jmp_buf buf;
@@ -137,3 +138,13 @@
return top;
}
+
+#else
+
+unsigned long os_get_top_address(void)
+{
+ /* The old value of CONFIG_TOP_ADDR */
+ return 0x7fc0000000;
+}
+
+#endif
diff --git a/arch/x86/um/os-Linux/tls.c b/arch/x86/um/os-Linux/tls.c
new file mode 100644
index 0000000..82276b6
--- /dev/null
+++ b/arch/x86/um/os-Linux/tls.c
@@ -0,0 +1,67 @@
+#include <errno.h>
+#include <linux/unistd.h>
+
+#include <sys/ptrace.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+
+#include "sysdep/tls.h"
+
+#ifndef PTRACE_GET_THREAD_AREA
+#define PTRACE_GET_THREAD_AREA 25
+#endif
+
+#ifndef PTRACE_SET_THREAD_AREA
+#define PTRACE_SET_THREAD_AREA 26
+#endif
+
+/* Checks whether host supports TLS, and sets *tls_min according to the value
+ * valid on the host.
+ * i386 host have it == 6; x86_64 host have it == 12, for i386 emulation. */
+void check_host_supports_tls(int *supports_tls, int *tls_min)
+{
+ /* Values for x86 and x86_64.*/
+ int val[] = {GDT_ENTRY_TLS_MIN_I386, GDT_ENTRY_TLS_MIN_X86_64};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(val); i++) {
+ user_desc_t info;
+ info.entry_number = val[i];
+
+ if (syscall(__NR_get_thread_area, &info) == 0) {
+ *tls_min = val[i];
+ *supports_tls = 1;
+ return;
+ } else {
+ if (errno == EINVAL)
+ continue;
+ else if (errno == ENOSYS)
+ *supports_tls = 0;
+ return;
+ }
+ }
+
+ *supports_tls = 0;
+}
+
+int os_set_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_SET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
+
+int os_get_thread_area(user_desc_t *info, int pid)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_GET_THREAD_AREA, pid, info->entry_number,
+ (unsigned long) info);
+ if (ret < 0)
+ ret = -errno;
+ return ret;
+}
diff --git a/arch/um/sys-i386/ptrace.c b/arch/x86/um/ptrace_32.c
similarity index 82%
rename from arch/um/sys-i386/ptrace.c
rename to arch/x86/um/ptrace_32.c
index 3375c27..3b949da 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/x86/um/ptrace_32.c
@@ -50,20 +50,47 @@
/* 1 = access 0 = no access */
#define FLAG_MASK 0x00044dd5
+static const int reg_offsets[] = {
+ [EBX] = HOST_BX,
+ [ECX] = HOST_CX,
+ [EDX] = HOST_DX,
+ [ESI] = HOST_SI,
+ [EDI] = HOST_DI,
+ [EBP] = HOST_BP,
+ [EAX] = HOST_AX,
+ [DS] = HOST_DS,
+ [ES] = HOST_ES,
+ [FS] = HOST_FS,
+ [GS] = HOST_GS,
+ [EIP] = HOST_IP,
+ [CS] = HOST_CS,
+ [EFL] = HOST_EFLAGS,
+ [UESP] = HOST_SP,
+ [SS] = HOST_SS,
+};
+
int putreg(struct task_struct *child, int regno, unsigned long value)
{
regno >>= 2;
switch (regno) {
+ case EBX:
+ case ECX:
+ case EDX:
+ case ESI:
+ case EDI:
+ case EBP:
+ case EAX:
+ case EIP:
+ case UESP:
+ break;
case FS:
if (value && (value & 3) != 3)
return -EIO;
- PT_REGS_FS(&child->thread.regs) = value;
- return 0;
+ break;
case GS:
if (value && (value & 3) != 3)
return -EIO;
- PT_REGS_GS(&child->thread.regs) = value;
- return 0;
+ break;
case DS:
case ES:
if (value && (value & 3) != 3)
@@ -78,10 +105,15 @@
break;
case EFL:
value &= FLAG_MASK;
- value |= PT_REGS_EFLAGS(&child->thread.regs);
- break;
+ child->thread.regs.regs.gp[HOST_EFLAGS] |= value;
+ return 0;
+ case ORIG_EAX:
+ child->thread.regs.regs.syscall = value;
+ return 0;
+ default :
+ panic("Bad register in putreg() : %d\n", regno);
}
- PT_REGS_SET(&child->thread.regs, regno, value);
+ child->thread.regs.regs.gp[reg_offsets[regno]] = value;
return 0;
}
@@ -106,22 +138,35 @@
unsigned long getreg(struct task_struct *child, int regno)
{
- unsigned long retval = ~0UL;
+ unsigned long mask = ~0UL;
regno >>= 2;
switch (regno) {
+ case ORIG_EAX:
+ return child->thread.regs.regs.syscall;
case FS:
case GS:
case DS:
case ES:
case SS:
case CS:
- retval = 0xffff;
- /* fall through */
+ mask = 0xffff;
+ break;
+ case EIP:
+ case UESP:
+ case EAX:
+ case EBX:
+ case ECX:
+ case EDX:
+ case ESI:
+ case EDI:
+ case EBP:
+ case EFL:
+ break;
default:
- retval &= PT_REG(&child->thread.regs, regno);
+ panic("Bad register in getreg() : %d\n", regno);
}
- return retval;
+ return mask & child->thread.regs.regs.gp[reg_offsets[regno]];
}
/* read the word at location addr in the USER area. */
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/x86/um/ptrace_64.c
similarity index 72%
rename from arch/um/sys-x86_64/ptrace.c
rename to arch/x86/um/ptrace_64.c
index 4005506..3b52bf0 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/x86/um/ptrace_64.c
@@ -18,10 +18,39 @@
*/
#define FLAG_MASK 0x44dd5UL
+static const int reg_offsets[] =
+{
+ [R8 >> 3] = HOST_R8,
+ [R9 >> 3] = HOST_R9,
+ [R10 >> 3] = HOST_R10,
+ [R11 >> 3] = HOST_R11,
+ [R12 >> 3] = HOST_R12,
+ [R13 >> 3] = HOST_R13,
+ [R14 >> 3] = HOST_R14,
+ [R15 >> 3] = HOST_R15,
+ [RIP >> 3] = HOST_IP,
+ [RSP >> 3] = HOST_SP,
+ [RAX >> 3] = HOST_AX,
+ [RBX >> 3] = HOST_BX,
+ [RCX >> 3] = HOST_CX,
+ [RDX >> 3] = HOST_DX,
+ [RSI >> 3] = HOST_SI,
+ [RDI >> 3] = HOST_DI,
+ [RBP >> 3] = HOST_BP,
+ [CS >> 3] = HOST_CS,
+ [SS >> 3] = HOST_SS,
+ [FS_BASE >> 3] = HOST_FS_BASE,
+ [GS_BASE >> 3] = HOST_GS_BASE,
+ [DS >> 3] = HOST_DS,
+ [ES >> 3] = HOST_ES,
+ [FS >> 3] = HOST_FS,
+ [GS >> 3] = HOST_GS,
+ [EFLAGS >> 3] = HOST_EFLAGS,
+ [ORIG_RAX >> 3] = HOST_ORIG_AX,
+};
+
int putreg(struct task_struct *child, int regno, unsigned long value)
{
- unsigned long tmp;
-
#ifdef TIF_IA32
/*
* Some code in the 64bit emulation may not be 64bit clean.
@@ -31,6 +60,26 @@
value &= 0xffffffff;
#endif
switch (regno) {
+ case R8:
+ case R9:
+ case R10:
+ case R11:
+ case R12:
+ case R13:
+ case R14:
+ case R15:
+ case RIP:
+ case RSP:
+ case RAX:
+ case RBX:
+ case RCX:
+ case RDX:
+ case RSI:
+ case RDI:
+ case RBP:
+ case ORIG_RAX:
+ break;
+
case FS:
case GS:
case DS:
@@ -50,12 +99,14 @@
case EFLAGS:
value &= FLAG_MASK;
- tmp = PT_REGS_EFLAGS(&child->thread.regs) & ~FLAG_MASK;
- value |= tmp;
- break;
+ child->thread.regs.regs.gp[HOST_EFLAGS] |= value;
+ return 0;
+
+ default:
+ panic("Bad register in putreg(): %d\n", regno);
}
- PT_REGS_SET(&child->thread.regs, regno, value);
+ child->thread.regs.regs.gp[reg_offsets[regno >> 3]] = value;
return 0;
}
@@ -80,24 +131,46 @@
unsigned long getreg(struct task_struct *child, int regno)
{
- unsigned long retval = ~0UL;
+ unsigned long mask = ~0UL;
+#ifdef TIF_IA32
+ if (test_tsk_thread_flag(child, TIF_IA32))
+ mask = 0xffffffff;
+#endif
switch (regno) {
+ case R8:
+ case R9:
+ case R10:
+ case R11:
+ case R12:
+ case R13:
+ case R14:
+ case R15:
+ case RIP:
+ case RSP:
+ case RAX:
+ case RBX:
+ case RCX:
+ case RDX:
+ case RSI:
+ case RDI:
+ case RBP:
+ case ORIG_RAX:
+ case EFLAGS:
+ case FS_BASE:
+ case GS_BASE:
+ break;
case FS:
case GS:
case DS:
case ES:
case SS:
case CS:
- retval = 0xffff;
- /* fall through */
+ mask = 0xffff;
+ break;
default:
- retval &= PT_REG(&child->thread.regs, regno);
-#ifdef TIF_IA32
- if (test_tsk_thread_flag(child, TIF_IA32))
- retval &= 0xffffffff;
-#endif
+ panic("Bad register in getreg: %d\n", regno);
}
- return retval;
+ return mask & child->thread.regs.regs.gp[reg_offsets[regno >> 3]];
}
int peek_user(struct task_struct *child, long addr, long data)
diff --git a/arch/um/sys-i386/ptrace_user.c b/arch/x86/um/ptrace_user.c
similarity index 93%
rename from arch/um/sys-i386/ptrace_user.c
rename to arch/x86/um/ptrace_user.c
index 0b10c3e..3960ca1 100644
--- a/arch/um/sys-i386/ptrace_user.c
+++ b/arch/x86/um/ptrace_user.c
@@ -4,7 +4,7 @@
*/
#include <errno.h>
-#include <sys/ptrace.h>
+#include "ptrace_user.h"
int ptrace_getregs(long pid, unsigned long *regs_out)
{
diff --git a/arch/um/sys-i386/setjmp.S b/arch/x86/um/setjmp_32.S
similarity index 100%
rename from arch/um/sys-i386/setjmp.S
rename to arch/x86/um/setjmp_32.S
diff --git a/arch/um/sys-x86_64/setjmp.S b/arch/x86/um/setjmp_64.S
similarity index 100%
rename from arch/um/sys-x86_64/setjmp.S
rename to arch/x86/um/setjmp_64.S
diff --git a/arch/x86/um/shared/sysdep/archsetjmp.h b/arch/x86/um/shared/sysdep/archsetjmp.h
new file mode 100644
index 0000000..ff7766d
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/archsetjmp.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "archsetjmp_32.h"
+#else
+#include "archsetjmp_64.h"
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/archsetjmp.h b/arch/x86/um/shared/sysdep/archsetjmp_32.h
similarity index 100%
rename from arch/um/sys-i386/shared/sysdep/archsetjmp.h
rename to arch/x86/um/shared/sysdep/archsetjmp_32.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/archsetjmp.h b/arch/x86/um/shared/sysdep/archsetjmp_64.h
similarity index 100%
rename from arch/um/sys-x86_64/shared/sysdep/archsetjmp.h
rename to arch/x86/um/shared/sysdep/archsetjmp_64.h
diff --git a/arch/x86/um/shared/sysdep/faultinfo.h b/arch/x86/um/shared/sysdep/faultinfo.h
new file mode 100644
index 0000000..862ecb1
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/faultinfo.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "faultinfo_32.h"
+#else
+#include "faultinfo_64.h"
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/faultinfo.h b/arch/x86/um/shared/sysdep/faultinfo_32.h
similarity index 79%
rename from arch/um/sys-i386/shared/sysdep/faultinfo.h
rename to arch/x86/um/shared/sysdep/faultinfo_32.h
index db437cc..a26086b 100644
--- a/arch/um/sys-i386/shared/sysdep/faultinfo.h
+++ b/arch/x86/um/shared/sysdep/faultinfo_32.h
@@ -24,6 +24,12 @@
#define FAULT_WRITE(fi) ((fi).error_code & 2)
#define FAULT_ADDRESS(fi) ((fi).cr2)
+/* This is Page Fault */
+#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
+
+/* SKAS3 has no trap_no on i386, but get_skas_faultinfo() sets it to 0. */
+#define SEGV_MAYBE_FIXABLE(fi) ((fi)->trap_no == 0 && ptrace_faultinfo)
+
#define PTRACE_FULL_FAULTINFO 0
#endif
diff --git a/arch/um/sys-x86_64/shared/sysdep/faultinfo.h b/arch/x86/um/shared/sysdep/faultinfo_64.h
similarity index 83%
rename from arch/um/sys-x86_64/shared/sysdep/faultinfo.h
rename to arch/x86/um/shared/sysdep/faultinfo_64.h
index cb917b0..f811cbe 100644
--- a/arch/um/sys-x86_64/shared/sysdep/faultinfo.h
+++ b/arch/x86/um/shared/sysdep/faultinfo_64.h
@@ -24,6 +24,12 @@
#define FAULT_WRITE(fi) ((fi).error_code & 2)
#define FAULT_ADDRESS(fi) ((fi).cr2)
+/* This is Page Fault */
+#define SEGV_IS_FIXABLE(fi) ((fi)->trap_no == 14)
+
+/* No broken SKAS API, which doesn't pass trap_no, here. */
+#define SEGV_MAYBE_FIXABLE(fi) 0
+
#define PTRACE_FULL_FAULTINFO 1
#endif
diff --git a/arch/um/sys-i386/shared/sysdep/kernel-offsets.h b/arch/x86/um/shared/sysdep/kernel-offsets.h
similarity index 100%
rename from arch/um/sys-i386/shared/sysdep/kernel-offsets.h
rename to arch/x86/um/shared/sysdep/kernel-offsets.h
diff --git a/arch/x86/um/shared/sysdep/mcontext.h b/arch/x86/um/shared/sysdep/mcontext.h
new file mode 100644
index 0000000..b724c54
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/mcontext.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYS_SIGCONTEXT_X86_H
+#define __SYS_SIGCONTEXT_X86_H
+
+extern void get_regs_from_mc(struct uml_pt_regs *, mcontext_t *);
+
+#ifdef __i386__
+
+#define GET_FAULTINFO_FROM_MC(fi, mc) \
+ { \
+ (fi).cr2 = (mc)->cr2; \
+ (fi).error_code = (mc)->gregs[REG_ERR]; \
+ (fi).trap_no = (mc)->gregs[REG_TRAPNO]; \
+ }
+
+#else
+
+#define GET_FAULTINFO_FROM_MC(fi, mc) \
+ { \
+ (fi).cr2 = (mc)->gregs[REG_CR2]; \
+ (fi).error_code = (mc)->gregs[REG_ERR]; \
+ (fi).trap_no = (mc)->gregs[REG_TRAPNO]; \
+ }
+
+#endif
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace.h b/arch/x86/um/shared/sysdep/ptrace.h
new file mode 100644
index 0000000..711b162
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "ptrace_32.h"
+#else
+#include "ptrace_64.h"
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace_32.h b/arch/x86/um/shared/sysdep/ptrace_32.h
new file mode 100644
index 0000000..befd1df
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace_32.h
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_I386_PTRACE_H
+#define __SYSDEP_I386_PTRACE_H
+
+#include <generated/user_constants.h>
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+
+static inline void update_debugregs(int seq) {}
+
+/* syscall emulation path in ptrace */
+
+#ifndef PTRACE_SYSEMU
+#define PTRACE_SYSEMU 31
+#endif
+
+void set_using_sysemu(int value);
+int get_using_sysemu(void);
+extern int sysemu_supported;
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_EAX(r) ((r)[HOST_AX])
+#define REGS_EBX(r) ((r)[HOST_BX])
+#define REGS_ECX(r) ((r)[HOST_CX])
+#define REGS_EDX(r) ((r)[HOST_DX])
+#define REGS_ESI(r) ((r)[HOST_SI])
+#define REGS_EDI(r) ((r)[HOST_DI])
+#define REGS_EBP(r) ((r)[HOST_BP])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_SS(r) ((r)[HOST_SS])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_EAX(r) = (res)
+
+#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#ifndef PTRACE_SYSEMU_SINGLESTEP
+#define PTRACE_SYSEMU_SINGLESTEP 32
+#endif
+
+struct uml_pt_regs {
+ unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FPX_SIZE];
+ struct faultinfo faultinfo;
+ long syscall;
+ int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_EAX(r) REGS_EAX((r)->gp)
+#define UPT_EBX(r) REGS_EBX((r)->gp)
+#define UPT_ECX(r) REGS_ECX((r)->gp)
+#define UPT_EDX(r) REGS_EDX((r)->gp)
+#define UPT_ESI(r) REGS_ESI((r)->gp)
+#define UPT_EDI(r) REGS_EDI((r)->gp)
+#define UPT_EBP(r) REGS_EBP((r)->gp)
+#define UPT_ORIG_EAX(r) ((r)->syscall)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+
+#define UPT_SYSCALL_ARG1(r) UPT_EBX(r)
+#define UPT_SYSCALL_ARG2(r) UPT_ECX(r)
+#define UPT_SYSCALL_ARG3(r) UPT_EDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_ESI(r)
+#define UPT_SYSCALL_ARG5(r) UPT_EDI(r)
+#define UPT_SYSCALL_ARG6(r) UPT_EBP(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+struct syscall_args {
+ unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+ { .args = { UPT_SYSCALL_ARG1(r), \
+ UPT_SYSCALL_ARG2(r), \
+ UPT_SYSCALL_ARG3(r), \
+ UPT_SYSCALL_ARG4(r), \
+ UPT_SYSCALL_ARG5(r), \
+ UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_ORIG_SYSCALL(r) UPT_EAX(r)
+#define UPT_SYSCALL_NR(r) UPT_ORIG_EAX(r)
+#define UPT_SYSCALL_RET(r) UPT_EAX(r)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+extern void arch_init_registers(int pid);
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace_64.h b/arch/x86/um/shared/sysdep/ptrace_64.h
new file mode 100644
index 0000000..031edc5
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace_64.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ *
+ * Licensed under the GPL
+ */
+
+#ifndef __SYSDEP_X86_64_PTRACE_H
+#define __SYSDEP_X86_64_PTRACE_H
+
+#include <generated/user_constants.h>
+#include "sysdep/faultinfo.h"
+
+#define MAX_REG_OFFSET (UM_FRAME_SIZE)
+#define MAX_REG_NR ((MAX_REG_OFFSET) / sizeof(unsigned long))
+
+#define REGS_IP(r) ((r)[HOST_IP])
+#define REGS_SP(r) ((r)[HOST_SP])
+
+#define REGS_RBX(r) ((r)[HOST_BX])
+#define REGS_RCX(r) ((r)[HOST_CX])
+#define REGS_RDX(r) ((r)[HOST_DX])
+#define REGS_RSI(r) ((r)[HOST_SI])
+#define REGS_RDI(r) ((r)[HOST_DI])
+#define REGS_RBP(r) ((r)[HOST_BP])
+#define REGS_RAX(r) ((r)[HOST_AX])
+#define REGS_R8(r) ((r)[HOST_R8])
+#define REGS_R9(r) ((r)[HOST_R9])
+#define REGS_R10(r) ((r)[HOST_R10])
+#define REGS_R11(r) ((r)[HOST_R11])
+#define REGS_R12(r) ((r)[HOST_R12])
+#define REGS_R13(r) ((r)[HOST_R13])
+#define REGS_R14(r) ((r)[HOST_R14])
+#define REGS_R15(r) ((r)[HOST_R15])
+#define REGS_CS(r) ((r)[HOST_CS])
+#define REGS_EFLAGS(r) ((r)[HOST_EFLAGS])
+#define REGS_SS(r) ((r)[HOST_SS])
+
+#define HOST_FS_BASE 21
+#define HOST_GS_BASE 22
+#define HOST_DS 23
+#define HOST_ES 24
+#define HOST_FS 25
+#define HOST_GS 26
+
+/* Also defined in asm/ptrace-x86_64.h, but not in libc headers. So, these
+ * are already defined for kernel code, but not for userspace code.
+ */
+#ifndef FS_BASE
+/* These aren't defined in ptrace.h, but exist in struct user_regs_struct,
+ * which is what x86_64 ptrace actually uses.
+ */
+#define FS_BASE (HOST_FS_BASE * sizeof(long))
+#define GS_BASE (HOST_GS_BASE * sizeof(long))
+#define DS (HOST_DS * sizeof(long))
+#define ES (HOST_ES * sizeof(long))
+#define FS (HOST_FS * sizeof(long))
+#define GS (HOST_GS * sizeof(long))
+#endif
+
+#define REGS_FS_BASE(r) ((r)[HOST_FS_BASE])
+#define REGS_GS_BASE(r) ((r)[HOST_GS_BASE])
+#define REGS_DS(r) ((r)[HOST_DS])
+#define REGS_ES(r) ((r)[HOST_ES])
+#define REGS_FS(r) ((r)[HOST_FS])
+#define REGS_GS(r) ((r)[HOST_GS])
+
+#define REGS_ORIG_RAX(r) ((r)[HOST_ORIG_AX])
+
+#define REGS_SET_SYSCALL_RETURN(r, res) REGS_RAX(r) = (res)
+
+#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
+#define REGS_RESTART_SYSCALL(r) IP_RESTART_SYSCALL(REGS_IP(r))
+
+#define REGS_FAULT_ADDR(r) ((r)->fault_addr)
+
+#define REGS_FAULT_WRITE(r) FAULT_WRITE((r)->fault_type)
+
+#define REGS_TRAP(r) ((r)->trap_type)
+
+#define REGS_ERR(r) ((r)->fault_type)
+
+struct uml_pt_regs {
+ unsigned long gp[MAX_REG_NR];
+ unsigned long fp[HOST_FP_SIZE];
+ struct faultinfo faultinfo;
+ long syscall;
+ int is_user;
+};
+
+#define EMPTY_UML_PT_REGS { }
+
+#define UPT_RBX(r) REGS_RBX((r)->gp)
+#define UPT_RCX(r) REGS_RCX((r)->gp)
+#define UPT_RDX(r) REGS_RDX((r)->gp)
+#define UPT_RSI(r) REGS_RSI((r)->gp)
+#define UPT_RDI(r) REGS_RDI((r)->gp)
+#define UPT_RBP(r) REGS_RBP((r)->gp)
+#define UPT_RAX(r) REGS_RAX((r)->gp)
+#define UPT_R8(r) REGS_R8((r)->gp)
+#define UPT_R9(r) REGS_R9((r)->gp)
+#define UPT_R10(r) REGS_R10((r)->gp)
+#define UPT_R11(r) REGS_R11((r)->gp)
+#define UPT_R12(r) REGS_R12((r)->gp)
+#define UPT_R13(r) REGS_R13((r)->gp)
+#define UPT_R14(r) REGS_R14((r)->gp)
+#define UPT_R15(r) REGS_R15((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_FS_BASE(r) REGS_FS_BASE((r)->gp)
+#define UPT_FS(r) REGS_FS((r)->gp)
+#define UPT_GS_BASE(r) REGS_GS_BASE((r)->gp)
+#define UPT_GS(r) REGS_GS((r)->gp)
+#define UPT_DS(r) REGS_DS((r)->gp)
+#define UPT_ES(r) REGS_ES((r)->gp)
+#define UPT_CS(r) REGS_CS((r)->gp)
+#define UPT_SS(r) REGS_SS((r)->gp)
+#define UPT_ORIG_RAX(r) REGS_ORIG_RAX((r)->gp)
+
+#define UPT_IP(r) REGS_IP((r)->gp)
+#define UPT_SP(r) REGS_SP((r)->gp)
+
+#define UPT_EFLAGS(r) REGS_EFLAGS((r)->gp)
+#define UPT_SYSCALL_NR(r) ((r)->syscall)
+#define UPT_SYSCALL_RET(r) UPT_RAX(r)
+
+extern int user_context(unsigned long sp);
+
+#define UPT_IS_USER(r) ((r)->is_user)
+
+#define UPT_SYSCALL_ARG1(r) UPT_RDI(r)
+#define UPT_SYSCALL_ARG2(r) UPT_RSI(r)
+#define UPT_SYSCALL_ARG3(r) UPT_RDX(r)
+#define UPT_SYSCALL_ARG4(r) UPT_R10(r)
+#define UPT_SYSCALL_ARG5(r) UPT_R8(r)
+#define UPT_SYSCALL_ARG6(r) UPT_R9(r)
+
+struct syscall_args {
+ unsigned long args[6];
+};
+
+#define SYSCALL_ARGS(r) ((struct syscall_args) \
+ { .args = { UPT_SYSCALL_ARG1(r), \
+ UPT_SYSCALL_ARG2(r), \
+ UPT_SYSCALL_ARG3(r), \
+ UPT_SYSCALL_ARG4(r), \
+ UPT_SYSCALL_ARG5(r), \
+ UPT_SYSCALL_ARG6(r) } } )
+
+#define UPT_RESTART_SYSCALL(r) REGS_RESTART_SYSCALL((r)->gp)
+
+#define UPT_FAULTINFO(r) (&(r)->faultinfo)
+
+static inline void arch_init_registers(int pid)
+{
+}
+
+#endif
diff --git a/arch/x86/um/shared/sysdep/ptrace_user.h b/arch/x86/um/shared/sysdep/ptrace_user.h
new file mode 100644
index 0000000..16cd6b5
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/ptrace_user.h
@@ -0,0 +1,27 @@
+#include <generated/user_constants.h>
+
+#define PT_OFFSET(r) ((r) * sizeof(long))
+
+#define PT_SYSCALL_NR(regs) ((regs)[HOST_ORIG_AX])
+#define PT_SYSCALL_NR_OFFSET PT_OFFSET(HOST_ORIG_AX)
+
+#define PT_SYSCALL_RET_OFFSET PT_OFFSET(HOST_AX)
+
+#define REGS_IP_INDEX HOST_IP
+#define REGS_SP_INDEX HOST_SP
+
+#ifdef __i386__
+#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
+#else
+#define FP_SIZE HOST_FP_SIZE
+
+/*
+ * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
+ * it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
+ * 2.4 name and value for 2.4 host compatibility.
+ */
+#ifndef PTRACE_OLDSETOPTIONS
+#define PTRACE_OLDSETOPTIONS 21
+#endif
+
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/skas_ptrace.h b/arch/x86/um/shared/sysdep/skas_ptrace.h
similarity index 80%
rename from arch/um/sys-i386/shared/sysdep/skas_ptrace.h
rename to arch/x86/um/shared/sysdep/skas_ptrace.h
index e27b8a7..453febe 100644
--- a/arch/um/sys-i386/shared/sysdep/skas_ptrace.h
+++ b/arch/x86/um/shared/sysdep/skas_ptrace.h
@@ -3,8 +3,8 @@
* Licensed under the GPL
*/
-#ifndef __SYSDEP_I386_SKAS_PTRACE_H
-#define __SYSDEP_I386_SKAS_PTRACE_H
+#ifndef __SYSDEP_X86_SKAS_PTRACE_H
+#define __SYSDEP_X86_SKAS_PTRACE_H
struct ptrace_faultinfo {
int is_write;
diff --git a/arch/x86/um/shared/sysdep/stub.h b/arch/x86/um/shared/sysdep/stub.h
new file mode 100644
index 0000000..bd161e3
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/stub.h
@@ -0,0 +1,14 @@
+#include <asm/unistd.h>
+#include <sys/mman.h>
+#include <signal.h>
+#include "as-layout.h"
+#include "stub-data.h"
+
+#ifdef __i386__
+#include "stub_32.h"
+#else
+#include "stub_64.h"
+#endif
+
+extern void stub_segv_handler(int, siginfo_t *, void *);
+extern void stub_clone_handler(void);
diff --git a/arch/um/sys-i386/shared/sysdep/stub.h b/arch/x86/um/shared/sysdep/stub_32.h
similarity index 90%
rename from arch/um/sys-i386/shared/sysdep/stub.h
rename to arch/x86/um/shared/sysdep/stub_32.h
index 977dedd..51fd256 100644
--- a/arch/um/sys-i386/shared/sysdep/stub.h
+++ b/arch/x86/um/shared/sysdep/stub_32.h
@@ -6,15 +6,7 @@
#ifndef __SYSDEP_STUB_H
#define __SYSDEP_STUB_H
-#include <sys/mman.h>
#include <asm/ptrace.h>
-#include <asm/unistd.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
#define STUB_SYSCALL_RET EAX
#define STUB_MMAP_NR __NR_mmap2
diff --git a/arch/um/sys-x86_64/shared/sysdep/stub.h b/arch/x86/um/shared/sysdep/stub_64.h
similarity index 90%
rename from arch/um/sys-x86_64/shared/sysdep/stub.h
rename to arch/x86/um/shared/sysdep/stub_64.h
index 3432aa2..994df93 100644
--- a/arch/um/sys-x86_64/shared/sysdep/stub.h
+++ b/arch/x86/um/shared/sysdep/stub_64.h
@@ -6,15 +6,7 @@
#ifndef __SYSDEP_STUB_H
#define __SYSDEP_STUB_H
-#include <sys/mman.h>
-#include <asm/unistd.h>
#include <sysdep/ptrace_user.h>
-#include "as-layout.h"
-#include "stub-data.h"
-#include "kern_constants.h"
-
-extern void stub_segv_handler(int sig);
-extern void stub_clone_handler(void);
#define STUB_SYSCALL_RET PT_INDEX(RAX)
#define STUB_MMAP_NR __NR_mmap
diff --git a/arch/x86/um/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls.h
new file mode 100644
index 0000000..bd9a89b
--- /dev/null
+++ b/arch/x86/um/shared/sysdep/syscalls.h
@@ -0,0 +1,5 @@
+#ifdef __i386__
+#include "syscalls_32.h"
+#else
+#include "syscalls_64.h"
+#endif
diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls_32.h
similarity index 100%
rename from arch/um/sys-i386/shared/sysdep/syscalls.h
rename to arch/x86/um/shared/sysdep/syscalls_32.h
diff --git a/arch/um/sys-x86_64/shared/sysdep/syscalls.h b/arch/x86/um/shared/sysdep/syscalls_64.h
similarity index 96%
rename from arch/um/sys-x86_64/shared/sysdep/syscalls.h
rename to arch/x86/um/shared/sysdep/syscalls_64.h
index 7cfb0b08..8a7d5e1 100644
--- a/arch/um/sys-x86_64/shared/sysdep/syscalls.h
+++ b/arch/x86/um/shared/sysdep/syscalls_64.h
@@ -9,7 +9,6 @@
#include <linux/msg.h>
#include <linux/shm.h>
-#include <kern_constants.h>
typedef long syscall_handler_t(void);
diff --git a/arch/um/sys-i386/shared/sysdep/tls.h b/arch/x86/um/shared/sysdep/tls.h
similarity index 79%
rename from arch/um/sys-i386/shared/sysdep/tls.h
rename to arch/x86/um/shared/sysdep/tls.h
index 3455075..27cce00 100644
--- a/arch/um/sys-i386/shared/sysdep/tls.h
+++ b/arch/x86/um/shared/sysdep/tls.h
@@ -17,16 +17,23 @@
unsigned int limit_in_pages:1;
unsigned int seg_not_present:1;
unsigned int useable:1;
+#ifdef __x86_64__
+ unsigned int lm:1;
+#endif
} user_desc_t;
# else /* __KERNEL__ */
-# include <ldt.h>
typedef struct user_desc user_desc_t;
# endif /* __KERNEL__ */
+extern int os_set_thread_area(user_desc_t *info, int pid);
+extern int os_get_thread_area(user_desc_t *info, int pid);
+
+#ifdef __i386__
#define GDT_ENTRY_TLS_MIN_I386 6
#define GDT_ENTRY_TLS_MIN_X86_64 12
+#endif
#endif /* _SYSDEP_TLS_H */
diff --git a/arch/um/sys-i386/signal.c b/arch/x86/um/signal.c
similarity index 69%
rename from arch/um/sys-i386/signal.c
rename to arch/x86/um/signal.c
index 89a4662..4883b95 100644
--- a/arch/um/sys-i386/signal.c
+++ b/arch/x86/um/signal.c
@@ -1,36 +1,20 @@
/*
- * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright (C) 2003 PathScale, Inc.
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
+
+#include <linux/personality.h>
#include <linux/ptrace.h>
+#include <linux/kernel.h>
#include <asm/unistd.h>
#include <asm/uaccess.h>
#include <asm/ucontext.h>
#include "frame_kern.h"
#include "skas.h"
-void copy_sc(struct uml_pt_regs *regs, void *from)
-{
- struct sigcontext *sc = from;
-
- REGS_GS(regs->gp) = sc->gs;
- REGS_FS(regs->gp) = sc->fs;
- REGS_ES(regs->gp) = sc->es;
- REGS_DS(regs->gp) = sc->ds;
- REGS_EDI(regs->gp) = sc->di;
- REGS_ESI(regs->gp) = sc->si;
- REGS_EBP(regs->gp) = sc->bp;
- REGS_SP(regs->gp) = sc->sp;
- REGS_EBX(regs->gp) = sc->bx;
- REGS_EDX(regs->gp) = sc->dx;
- REGS_ECX(regs->gp) = sc->cx;
- REGS_EAX(regs->gp) = sc->ax;
- REGS_IP(regs->gp) = sc->ip;
- REGS_CS(regs->gp) = sc->cs;
- REGS_EFLAGS(regs->gp) = sc->flags;
- REGS_SS(regs->gp) = sc->ss;
-}
+#ifdef CONFIG_X86_32
/*
* FPU tag word conversions.
@@ -164,6 +148,8 @@
extern int have_fpx_regs;
+#endif
+
static int copy_sc_from_user(struct pt_regs *regs,
struct sigcontext __user *from)
{
@@ -174,8 +160,45 @@
if (err)
return err;
+#define GETREG(regno, regname) regs->regs.gp[HOST_##regno] = sc.regname
+
+#ifdef CONFIG_X86_32
+ GETREG(GS, gs);
+ GETREG(FS, fs);
+ GETREG(ES, es);
+ GETREG(DS, ds);
+#endif
+ GETREG(DI, di);
+ GETREG(SI, si);
+ GETREG(BP, bp);
+ GETREG(SP, sp);
+ GETREG(BX, bx);
+ GETREG(DX, dx);
+ GETREG(CX, cx);
+ GETREG(AX, ax);
+ GETREG(IP, ip);
+
+#ifdef CONFIG_X86_64
+ GETREG(R8, r8);
+ GETREG(R9, r9);
+ GETREG(R10, r10);
+ GETREG(R11, r11);
+ GETREG(R12, r12);
+ GETREG(R13, r13);
+ GETREG(R14, r14);
+ GETREG(R15, r15);
+#endif
+
+ GETREG(CS, cs);
+ GETREG(EFLAGS, flags);
+#ifdef CONFIG_X86_32
+ GETREG(SS, ss);
+#endif
+
+#undef GETREG
+
pid = userspace_pid[current_thread_info()->cpu];
- copy_sc(®s->regs, &sc);
+#ifdef CONFIG_X86_32
if (have_fpx_regs) {
struct user_fxsr_struct fpx;
@@ -196,8 +219,9 @@
-err);
return 1;
}
- }
- else {
+ } else
+#endif
+ {
struct user_i387_struct fp;
err = copy_from_user(&fp, sc.fpstate,
@@ -213,43 +237,66 @@
return 1;
}
}
-
return 0;
}
static int copy_sc_to_user(struct sigcontext __user *to,
struct _fpstate __user *to_fp, struct pt_regs *regs,
- unsigned long sp)
+ unsigned long mask)
{
struct sigcontext sc;
struct faultinfo * fi = ¤t->thread.arch.faultinfo;
int err, pid;
+ memset(&sc, 0, sizeof(struct sigcontext));
- sc.gs = REGS_GS(regs->regs.gp);
- sc.fs = REGS_FS(regs->regs.gp);
- sc.es = REGS_ES(regs->regs.gp);
- sc.ds = REGS_DS(regs->regs.gp);
- sc.di = REGS_EDI(regs->regs.gp);
- sc.si = REGS_ESI(regs->regs.gp);
- sc.bp = REGS_EBP(regs->regs.gp);
- sc.sp = sp;
- sc.bx = REGS_EBX(regs->regs.gp);
- sc.dx = REGS_EDX(regs->regs.gp);
- sc.cx = REGS_ECX(regs->regs.gp);
- sc.ax = REGS_EAX(regs->regs.gp);
- sc.ip = REGS_IP(regs->regs.gp);
- sc.cs = REGS_CS(regs->regs.gp);
- sc.flags = REGS_EFLAGS(regs->regs.gp);
- sc.sp_at_signal = regs->regs.gp[UESP];
- sc.ss = regs->regs.gp[SS];
+#define PUTREG(regno, regname) sc.regname = regs->regs.gp[HOST_##regno]
+
+#ifdef CONFIG_X86_32
+ PUTREG(GS, gs);
+ PUTREG(FS, fs);
+ PUTREG(ES, es);
+ PUTREG(DS, ds);
+#endif
+ PUTREG(DI, di);
+ PUTREG(SI, si);
+ PUTREG(BP, bp);
+ PUTREG(SP, sp);
+ PUTREG(BX, bx);
+ PUTREG(DX, dx);
+ PUTREG(CX, cx);
+ PUTREG(AX, ax);
+#ifdef CONFIG_X86_64
+ PUTREG(R8, r8);
+ PUTREG(R9, r9);
+ PUTREG(R10, r10);
+ PUTREG(R11, r11);
+ PUTREG(R12, r12);
+ PUTREG(R13, r13);
+ PUTREG(R14, r14);
+ PUTREG(R15, r15);
+#endif
+
sc.cr2 = fi->cr2;
sc.err = fi->error_code;
sc.trapno = fi->trap_no;
-
- to_fp = (to_fp ? to_fp : (struct _fpstate __user *) (to + 1));
+ PUTREG(IP, ip);
+ PUTREG(CS, cs);
+ PUTREG(EFLAGS, flags);
+#ifdef CONFIG_X86_32
+ PUTREG(SP, sp_at_signal);
+ PUTREG(SS, ss);
+#endif
+#undef PUTREG
+ sc.oldmask = mask;
sc.fpstate = to_fp;
+ err = copy_to_user(to, &sc, sizeof(struct sigcontext));
+ if (err)
+ return 1;
+
pid = userspace_pid[current_thread_info()->cpu];
+
+#ifdef CONFIG_X86_32
if (have_fpx_regs) {
struct user_fxsr_struct fpx;
@@ -272,8 +319,9 @@
if (copy_to_user(&to_fp->_fxsr_env[0], &fpx,
sizeof(struct user_fxsr_struct)))
return 1;
- }
- else {
+ } else
+#endif
+ {
struct user_i387_struct fp;
err = save_fp_registers(pid, (unsigned long *) &fp);
@@ -281,9 +329,10 @@
return 1;
}
- return copy_to_user(to, &sc, sizeof(sc));
+ return 0;
}
+#ifdef CONFIG_X86_32
static int copy_ucontext_to_user(struct ucontext __user *uc,
struct _fpstate __user *fp, sigset_t *set,
unsigned long sp)
@@ -293,7 +342,7 @@
err |= put_user(current->sas_ss_sp, &uc->uc_stack.ss_sp);
err |= put_user(sas_ss_flags(sp), &uc->uc_stack.ss_flags);
err |= put_user(current->sas_ss_size, &uc->uc_stack.ss_size);
- err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs, sp);
+ err |= copy_sc_to_user(&uc->uc_mcontext, fp, ¤t->thread.regs, 0);
err |= copy_to_user(&uc->uc_sigmask, set, sizeof(*set));
return err;
}
@@ -326,7 +375,6 @@
{
struct sigframe __user *frame;
void __user *restorer;
- unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
/* This is the same calculation as i386 - ((sp + 4) & 15) == 0 */
@@ -339,20 +387,9 @@
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
- /* Update SP now because the page fault handler refuses to extend
- * the stack if the faulting address is too far below the current
- * SP, which frame now certainly is. If there's an error, the original
- * value is restored on the way out.
- * When writing the sigcontext to the stack, we have to write the
- * original value, so that's passed to copy_sc_to_user, which does
- * the right thing with it.
- */
- PT_REGS_SP(regs) = (unsigned long) frame;
-
err |= __put_user(restorer, &frame->pretcode);
err |= __put_user(sig, &frame->sig);
- err |= copy_sc_to_user(&frame->sc, NULL, regs, save_sp);
- err |= __put_user(mask->sig[0], &frame->sc.oldmask);
+ err |= copy_sc_to_user(&frame->sc, &frame->fpstate, regs, mask->sig[0]);
if (_NSIG_WORDS > 1)
err |= __copy_to_user(&frame->extramask, &mask->sig[1],
sizeof(frame->extramask));
@@ -369,7 +406,7 @@
err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
if (err)
- goto err;
+ return err;
PT_REGS_SP(regs) = (unsigned long) frame;
PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
@@ -380,10 +417,6 @@
if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
ptrace_notify(SIGTRAP);
return 0;
-
-err:
- PT_REGS_SP(regs) = save_sp;
- return err;
}
int setup_signal_stack_si(unsigned long stack_top, int sig,
@@ -392,7 +425,6 @@
{
struct rt_sigframe __user *frame;
void __user *restorer;
- unsigned long save_sp = PT_REGS_SP(regs);
int err = 0;
stack_top &= -8UL;
@@ -404,16 +436,13 @@
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
- /* See comment above about why this is here */
- PT_REGS_SP(regs) = (unsigned long) frame;
-
err |= __put_user(restorer, &frame->pretcode);
err |= __put_user(sig, &frame->sig);
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
err |= copy_ucontext_to_user(&frame->uc, &frame->fpstate, mask,
- save_sp);
+ PT_REGS_SP(regs));
/*
* This is movl $,%eax ; int $0x80
@@ -427,8 +456,9 @@
err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
if (err)
- goto err;
+ return err;
+ PT_REGS_SP(regs) = (unsigned long) frame;
PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
PT_REGS_EAX(regs) = (unsigned long) sig;
PT_REGS_EDX(regs) = (unsigned long) &frame->info;
@@ -437,13 +467,9 @@
if ((current->ptrace & PT_DTRACE) && (current->ptrace & PT_PTRACED))
ptrace_notify(SIGTRAP);
return 0;
-
-err:
- PT_REGS_SP(regs) = save_sp;
- return err;
}
-long sys_sigreturn(struct pt_regs regs)
+long sys_sigreturn(struct pt_regs *regs)
{
unsigned long sp = PT_REGS_SP(¤t->thread.regs);
struct sigframe __user *frame = (struct sigframe __user *)(sp - 8);
@@ -458,11 +484,7 @@
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
if (copy_sc_from_user(¤t->thread.regs, sc))
goto segfault;
@@ -476,24 +498,107 @@
return 0;
}
-long sys_rt_sigreturn(struct pt_regs regs)
+#else
+
+struct rt_sigframe
+{
+ char __user *pretcode;
+ struct ucontext uc;
+ struct siginfo info;
+ struct _fpstate fpstate;
+};
+
+int setup_signal_stack_si(unsigned long stack_top, int sig,
+ struct k_sigaction *ka, struct pt_regs * regs,
+ siginfo_t *info, sigset_t *set)
+{
+ struct rt_sigframe __user *frame;
+ int err = 0;
+ struct task_struct *me = current;
+
+ frame = (struct rt_sigframe __user *)
+ round_down(stack_top - sizeof(struct rt_sigframe), 16);
+ /* Subtract 128 for a red zone and 8 for proper alignment */
+ frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8);
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto out;
+
+ if (ka->sa.sa_flags & SA_SIGINFO) {
+ err |= copy_siginfo_to_user(&frame->info, info);
+ if (err)
+ goto out;
+ }
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(PT_REGS_SP(regs)),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= copy_sc_to_user(&frame->uc.uc_mcontext, &frame->fpstate, regs,
+ set->sig[0]);
+ err |= __put_user(&frame->fpstate, &frame->uc.uc_mcontext.fpstate);
+ if (sizeof(*set) == 16) {
+ __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
+ __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
+ }
+ else
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set,
+ sizeof(*set));
+
+ /*
+ * Set up to return from userspace. If provided, use a stub
+ * already in userspace.
+ */
+ /* x86-64 should always use SA_RESTORER. */
+ if (ka->sa.sa_flags & SA_RESTORER)
+ err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
+ else
+ /* could use a vstub here */
+ return err;
+
+ if (err)
+ return err;
+
+ /* Set up registers for signal handler */
+ {
+ struct exec_domain *ed = current_thread_info()->exec_domain;
+ if (unlikely(ed && ed->signal_invmap && sig < 32))
+ sig = ed->signal_invmap[sig];
+ }
+
+ PT_REGS_SP(regs) = (unsigned long) frame;
+ PT_REGS_RDI(regs) = sig;
+ /* In case the signal handler was declared without prototypes */
+ PT_REGS_RAX(regs) = 0;
+
+ /*
+ * This also works for non SA_SIGINFO handlers because they expect the
+ * next argument after the signal number on the stack.
+ */
+ PT_REGS_RSI(regs) = (unsigned long) &frame->info;
+ PT_REGS_RDX(regs) = (unsigned long) &frame->uc;
+ PT_REGS_RIP(regs) = (unsigned long) ka->sa.sa_handler;
+ out:
+ return err;
+}
+#endif
+
+long sys_rt_sigreturn(struct pt_regs *regs)
{
unsigned long sp = PT_REGS_SP(¤t->thread.regs);
struct rt_sigframe __user *frame =
- (struct rt_sigframe __user *) (sp - 4);
- sigset_t set;
+ (struct rt_sigframe __user *)(sp - sizeof(long));
struct ucontext __user *uc = &frame->uc;
- int sig_size = _NSIG_WORDS * sizeof(unsigned long);
+ sigset_t set;
- if (copy_from_user(&set, &uc->uc_sigmask, sig_size))
+ if (copy_from_user(&set, &uc->uc_sigmask, sizeof(set)))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ set_current_blocked(&set);
if (copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext))
goto segfault;
@@ -506,3 +611,14 @@
force_sig(SIGSEGV, current);
return 0;
}
+
+#ifdef CONFIG_X86_32
+long ptregs_sigreturn(void)
+{
+ return sys_sigreturn(NULL);
+}
+long ptregs_rt_sigreturn(void)
+{
+ return sys_rt_sigreturn(NULL);
+}
+#endif
diff --git a/arch/um/sys-i386/stub.S b/arch/x86/um/stub_32.S
similarity index 100%
rename from arch/um/sys-i386/stub.S
rename to arch/x86/um/stub_32.S
diff --git a/arch/um/sys-x86_64/stub.S b/arch/x86/um/stub_64.S
similarity index 100%
rename from arch/um/sys-x86_64/stub.S
rename to arch/x86/um/stub_64.S
diff --git a/arch/x86/um/stub_segv.c b/arch/x86/um/stub_segv.c
new file mode 100644
index 0000000..b7450bd
--- /dev/null
+++ b/arch/x86/um/stub_segv.c
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#include "sysdep/stub.h"
+#include "sysdep/faultinfo.h"
+#include "sysdep/mcontext.h"
+
+void __attribute__ ((__section__ (".__syscall_stub")))
+stub_segv_handler(int sig, siginfo_t *info, void *p)
+{
+ struct ucontext *uc = p;
+
+ GET_FAULTINFO_FROM_MC(*((struct faultinfo *) STUB_DATA),
+ &uc->uc_mcontext);
+ trap_myself();
+}
+
diff --git a/arch/um/sys-i386/sys_call_table.S b/arch/x86/um/sys_call_table_32.S
similarity index 81%
rename from arch/um/sys-i386/sys_call_table.S
rename to arch/x86/um/sys_call_table_32.S
index de274071..a7ca80d 100644
--- a/arch/um/sys-i386/sys_call_table.S
+++ b/arch/x86/um/sys_call_table_32.S
@@ -13,16 +13,14 @@
#define ptregs_execve sys_execve
#define ptregs_iopl sys_iopl
#define ptregs_vm86old sys_vm86old
-#define ptregs_sigreturn sys_sigreturn
#define ptregs_clone sys_clone
#define ptregs_vm86 sys_vm86
-#define ptregs_rt_sigreturn sys_rt_sigreturn
#define ptregs_sigaltstack sys_sigaltstack
#define ptregs_vfork sys_vfork
.section .rodata,"a"
-#include "../../x86/kernel/syscall_table_32.S"
+#include "../kernel/syscall_table_32.S"
ENTRY(syscall_table_size)
.long .-sys_call_table
diff --git a/arch/um/sys-x86_64/syscall_table.c b/arch/x86/um/sys_call_table_64.c
similarity index 95%
rename from arch/um/sys-x86_64/syscall_table.c
rename to arch/x86/um/sys_call_table_64.c
index 47d469e..99522f7 100644
--- a/arch/um/sys-x86_64/syscall_table.c
+++ b/arch/x86/um/sys_call_table_64.c
@@ -6,7 +6,6 @@
#include <linux/linkage.h>
#include <linux/sys.h>
#include <linux/cache.h>
-#include <kern_constants.h>
#define __NO_STUBS
@@ -59,7 +58,7 @@
*/
sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
-#include "../../x86/include/asm/unistd_64.h"
+#include <asm/unistd_64.h>
};
int syscall_table_size = sizeof(sys_call_table);
diff --git a/arch/um/sys-i386/syscalls.c b/arch/x86/um/syscalls_32.c
similarity index 100%
rename from arch/um/sys-i386/syscalls.c
rename to arch/x86/um/syscalls_32.c
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/x86/um/syscalls_64.c
similarity index 100%
rename from arch/um/sys-x86_64/syscalls.c
rename to arch/x86/um/syscalls_64.c
diff --git a/arch/um/sys-i386/sysrq.c b/arch/x86/um/sysrq_32.c
similarity index 100%
rename from arch/um/sys-i386/sysrq.c
rename to arch/x86/um/sysrq_32.c
diff --git a/arch/um/sys-x86_64/sysrq.c b/arch/x86/um/sysrq_64.c
similarity index 94%
rename from arch/um/sys-x86_64/sysrq.c
rename to arch/x86/um/sysrq_64.c
index f4f82be..e891343 100644
--- a/arch/um/sys-x86_64/sysrq.c
+++ b/arch/x86/um/sysrq_64.c
@@ -20,7 +20,7 @@
current->comm, print_tainted(), init_utsname()->release);
printk(KERN_INFO "RIP: %04lx:[<%016lx>]\n", PT_REGS_CS(regs) & 0xffff,
PT_REGS_RIP(regs));
- printk(KERN_INFO "RSP: %016lx EFLAGS: %08lx\n", PT_REGS_RSP(regs),
+ printk(KERN_INFO "RSP: %016lx EFLAGS: %08lx\n", PT_REGS_SP(regs),
PT_REGS_EFLAGS(regs));
printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
PT_REGS_RAX(regs), PT_REGS_RBX(regs), PT_REGS_RCX(regs));
diff --git a/arch/um/sys-i386/tls.c b/arch/x86/um/tls_32.c
similarity index 100%
rename from arch/um/sys-i386/tls.c
rename to arch/x86/um/tls_32.c
diff --git a/arch/um/sys-x86_64/tls.c b/arch/x86/um/tls_64.c
similarity index 100%
rename from arch/um/sys-x86_64/tls.c
rename to arch/x86/um/tls_64.c
diff --git a/arch/x86/um/user-offsets.c b/arch/x86/um/user-offsets.c
new file mode 100644
index 0000000..ca49be8
--- /dev/null
+++ b/arch/x86/um/user-offsets.c
@@ -0,0 +1,80 @@
+#include <stdio.h>
+#include <stddef.h>
+#include <signal.h>
+#include <sys/poll.h>
+#include <sys/mman.h>
+#include <sys/user.h>
+#define __FRAME_OFFSETS
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define DEFINE_LONGS(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
+
+void foo(void)
+{
+#ifdef __i386__
+ DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
+ DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
+
+ DEFINE(HOST_IP, EIP);
+ DEFINE(HOST_SP, UESP);
+ DEFINE(HOST_EFLAGS, EFL);
+ DEFINE(HOST_AX, EAX);
+ DEFINE(HOST_BX, EBX);
+ DEFINE(HOST_CX, ECX);
+ DEFINE(HOST_DX, EDX);
+ DEFINE(HOST_SI, ESI);
+ DEFINE(HOST_DI, EDI);
+ DEFINE(HOST_BP, EBP);
+ DEFINE(HOST_CS, CS);
+ DEFINE(HOST_SS, SS);
+ DEFINE(HOST_DS, DS);
+ DEFINE(HOST_FS, FS);
+ DEFINE(HOST_ES, ES);
+ DEFINE(HOST_GS, GS);
+ DEFINE(HOST_ORIG_AX, ORIG_EAX);
+#else
+ DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
+ DEFINE_LONGS(HOST_BX, RBX);
+ DEFINE_LONGS(HOST_CX, RCX);
+ DEFINE_LONGS(HOST_DI, RDI);
+ DEFINE_LONGS(HOST_SI, RSI);
+ DEFINE_LONGS(HOST_DX, RDX);
+ DEFINE_LONGS(HOST_BP, RBP);
+ DEFINE_LONGS(HOST_AX, RAX);
+ DEFINE_LONGS(HOST_R8, R8);
+ DEFINE_LONGS(HOST_R9, R9);
+ DEFINE_LONGS(HOST_R10, R10);
+ DEFINE_LONGS(HOST_R11, R11);
+ DEFINE_LONGS(HOST_R12, R12);
+ DEFINE_LONGS(HOST_R13, R13);
+ DEFINE_LONGS(HOST_R14, R14);
+ DEFINE_LONGS(HOST_R15, R15);
+ DEFINE_LONGS(HOST_ORIG_AX, ORIG_RAX);
+ DEFINE_LONGS(HOST_CS, CS);
+ DEFINE_LONGS(HOST_SS, SS);
+ DEFINE_LONGS(HOST_EFLAGS, EFLAGS);
+#if 0
+ DEFINE_LONGS(HOST_FS, FS);
+ DEFINE_LONGS(HOST_GS, GS);
+ DEFINE_LONGS(HOST_DS, DS);
+ DEFINE_LONGS(HOST_ES, ES);
+#endif
+
+ DEFINE_LONGS(HOST_IP, RIP);
+ DEFINE_LONGS(HOST_SP, RSP);
+#endif
+
+ DEFINE(UM_FRAME_SIZE, sizeof(struct user_regs_struct));
+ DEFINE(UM_POLLIN, POLLIN);
+ DEFINE(UM_POLLPRI, POLLPRI);
+ DEFINE(UM_POLLOUT, POLLOUT);
+
+ DEFINE(UM_PROT_READ, PROT_READ);
+ DEFINE(UM_PROT_WRITE, PROT_WRITE);
+ DEFINE(UM_PROT_EXEC, PROT_EXEC);
+}
diff --git a/arch/um/sys-x86_64/vdso/Makefile b/arch/x86/um/vdso/Makefile
similarity index 94%
rename from arch/um/sys-x86_64/vdso/Makefile
rename to arch/x86/um/vdso/Makefile
index 5dffe6d..6c803ca 100644
--- a/arch/um/sys-x86_64/vdso/Makefile
+++ b/arch/x86/um/vdso/Makefile
@@ -46,8 +46,8 @@
#
# vDSO code runs in userspace and -pg doesn't help with profiling anyway.
#
-CFLAGS_REMOVE_vdso-note.o = -pg
-CFLAGS_REMOVE_um_vdso.o = -pg
+CFLAGS_REMOVE_vdso-note.o = -pg -fprofile-arcs -ftest-coverage
+CFLAGS_REMOVE_um_vdso.o = -pg -fprofile-arcs -ftest-coverage
targets += vdso-syms.lds
obj-$(VDSO64-y) += vdso-syms.lds
diff --git a/arch/um/sys-x86_64/vdso/checkundef.sh b/arch/x86/um/vdso/checkundef.sh
similarity index 100%
rename from arch/um/sys-x86_64/vdso/checkundef.sh
rename to arch/x86/um/vdso/checkundef.sh
diff --git a/arch/um/sys-x86_64/vdso/um_vdso.c b/arch/x86/um/vdso/um_vdso.c
similarity index 100%
rename from arch/um/sys-x86_64/vdso/um_vdso.c
rename to arch/x86/um/vdso/um_vdso.c
diff --git a/arch/um/sys-x86_64/vdso/vdso-layout.lds.S b/arch/x86/um/vdso/vdso-layout.lds.S
similarity index 100%
rename from arch/um/sys-x86_64/vdso/vdso-layout.lds.S
rename to arch/x86/um/vdso/vdso-layout.lds.S
diff --git a/arch/um/sys-x86_64/vdso/vdso-note.S b/arch/x86/um/vdso/vdso-note.S
similarity index 100%
rename from arch/um/sys-x86_64/vdso/vdso-note.S
rename to arch/x86/um/vdso/vdso-note.S
diff --git a/arch/um/sys-x86_64/vdso/vdso.S b/arch/x86/um/vdso/vdso.S
similarity index 69%
rename from arch/um/sys-x86_64/vdso/vdso.S
rename to arch/x86/um/vdso/vdso.S
index ec82c16..1cb468a 100644
--- a/arch/um/sys-x86_64/vdso/vdso.S
+++ b/arch/x86/um/vdso/vdso.S
@@ -4,7 +4,7 @@
.globl vdso_start, vdso_end
vdso_start:
- .incbin "arch/um/sys-x86_64/vdso/vdso.so"
+ .incbin "arch/x86/um/vdso/vdso.so"
vdso_end:
__FINIT
diff --git a/arch/um/sys-x86_64/vdso/vdso.lds.S b/arch/x86/um/vdso/vdso.lds.S
similarity index 100%
rename from arch/um/sys-x86_64/vdso/vdso.lds.S
rename to arch/x86/um/vdso/vdso.lds.S
diff --git a/arch/um/sys-x86_64/vdso/vma.c b/arch/x86/um/vdso/vma.c
similarity index 95%
rename from arch/um/sys-x86_64/vdso/vma.c
rename to arch/x86/um/vdso/vma.c
index 9495c8d..91f4ec9 100644
--- a/arch/um/sys-x86_64/vdso/vma.c
+++ b/arch/x86/um/vdso/vma.c
@@ -28,7 +28,7 @@
um_vdso_addr = task_size - PAGE_SIZE;
- vdsop = kmalloc(GFP_KERNEL, sizeof(struct page *));
+ vdsop = kmalloc(sizeof(struct page *), GFP_KERNEL);
if (!vdsop)
goto oom;
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 2ca59dc..1274080 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -933,7 +933,7 @@
static int erst_close_pstore(struct pstore_info *psi);
static ssize_t erst_reader(u64 *id, enum pstore_type_id *type,
struct timespec *time, struct pstore_info *psi);
-static u64 erst_writer(enum pstore_type_id type, unsigned int part,
+static int erst_writer(enum pstore_type_id type, u64 *id, unsigned int part,
size_t size, struct pstore_info *psi);
static int erst_clearer(enum pstore_type_id type, u64 id,
struct pstore_info *psi);
@@ -1040,11 +1040,12 @@
return (rc < 0) ? rc : (len - sizeof(*rcd));
}
-static u64 erst_writer(enum pstore_type_id type, unsigned int part,
+static int erst_writer(enum pstore_type_id type, u64 *id, unsigned int part,
size_t size, struct pstore_info *psi)
{
struct cper_pstore_record *rcd = (struct cper_pstore_record *)
(erst_info.buf - sizeof(*rcd));
+ int ret;
memset(rcd, 0, sizeof(*rcd));
memcpy(rcd->hdr.signature, CPER_SIG_RECORD, CPER_SIG_SIZE);
@@ -1079,9 +1080,10 @@
}
rcd->sec_hdr.section_severity = CPER_SEV_FATAL;
- erst_write(&rcd->hdr);
+ ret = erst_write(&rcd->hdr);
+ *id = rcd->hdr.record_id;
- return rcd->hdr.record_id;
+ return ret;
}
static int erst_clearer(enum pstore_type_id type, u64 id,
@@ -1165,7 +1167,7 @@
goto err_release_erange;
buf = kmalloc(erst_erange.size, GFP_KERNEL);
- mutex_init(&erst_info.buf_mutex);
+ spin_lock_init(&erst_info.buf_lock);
if (buf) {
erst_info.buf = buf + sizeof(struct cper_pstore_record);
erst_info.bufsize = erst_erange.size -
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index c03277d..004f2ce 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -202,11 +202,18 @@
return 0;
}
+static const struct of_device_id ahci_of_match[] = {
+ { .compatible = "calxeda,hb-ahci", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
static struct platform_driver ahci_driver = {
.remove = __devexit_p(ahci_remove),
.driver = {
.name = "ahci",
.owner = THIS_MODULE,
+ .of_match_table = ahci_of_match,
},
.id_table = ahci_devtype,
};
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 079c088..e7a5750 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -8,10 +8,13 @@
#include <linux/scatterlist.h>
#include <linux/string_helpers.h>
#include <scsi/scsi_cmnd.h>
+#include <linux/idr.h>
#define PART_BITS 4
-static int major, index;
+static int major;
+static DEFINE_IDA(vd_index_ida);
+
struct workqueue_struct *virtblk_wq;
struct virtio_blk
@@ -35,6 +38,9 @@
/* What host tells us, plus 2 for header & tailer. */
unsigned int sg_elems;
+ /* Ida index - used to track minor number allocations. */
+ int index;
+
/* Scatterlist: can be too big for stack. */
struct scatterlist sg[/*sg_elems*/];
};
@@ -276,6 +282,11 @@
return index << PART_BITS;
}
+static int minor_to_index(int minor)
+{
+ return minor >> PART_BITS;
+}
+
static ssize_t virtblk_serial_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -341,14 +352,17 @@
{
struct virtio_blk *vblk;
struct request_queue *q;
- int err;
+ int err, index;
u64 cap;
u32 v, blk_size, sg_elems, opt_io_size;
u16 min_io_size;
u8 physical_block_exp, alignment_offset;
- if (index_to_minor(index) >= 1 << MINORBITS)
- return -ENOSPC;
+ err = ida_simple_get(&vd_index_ida, 0, minor_to_index(1 << MINORBITS),
+ GFP_KERNEL);
+ if (err < 0)
+ goto out;
+ index = err;
/* We need to know how many segments before we allocate. */
err = virtio_config_val(vdev, VIRTIO_BLK_F_SEG_MAX,
@@ -365,7 +379,7 @@
sizeof(vblk->sg[0]) * sg_elems, GFP_KERNEL);
if (!vblk) {
err = -ENOMEM;
- goto out;
+ goto out_free_index;
}
INIT_LIST_HEAD(&vblk->reqs);
@@ -421,7 +435,7 @@
vblk->disk->private_data = vblk;
vblk->disk->fops = &virtblk_fops;
vblk->disk->driverfs_dev = &vdev->dev;
- index++;
+ vblk->index = index;
/* configure queue flush support */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
@@ -516,6 +530,8 @@
vdev->config->del_vqs(vdev);
out_free_vblk:
kfree(vblk);
+out_free_index:
+ ida_simple_remove(&vd_index_ida, index);
out:
return err;
}
@@ -523,6 +539,7 @@
static void __devexit virtblk_remove(struct virtio_device *vdev)
{
struct virtio_blk *vblk = vdev->priv;
+ int index = vblk->index;
flush_work(&vblk->config_work);
@@ -538,6 +555,7 @@
mempool_destroy(vblk->pool);
vdev->config->del_vqs(vdev);
kfree(vblk);
+ ida_simple_remove(&vd_index_ida, index);
}
static const struct virtio_device_id id_table[] = {
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 423fd56..4364303 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -298,7 +298,7 @@
config RTC
tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
- && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN
+ && !ARM && !SUPERH && !S390 && !AVR32 && !BLACKFIN && !UML
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -346,7 +346,7 @@
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH && !AVR32 && !BLACKFIN && !UML
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -490,7 +490,7 @@
config PC8736x_GPIO
tristate "NatSemi PC8736x GPIO Support"
- depends on X86_32
+ depends on X86_32 && !UML
default SCx200_GPIO # mostly N
select NSC_GPIO # needed for support routines
help
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index 056b289..3695773 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -336,7 +336,8 @@
off_t j, io_pg_start;
int io_pg_count;
- if (type != 0 || mem->type != 0) {
+ if (type != mem->type ||
+ agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type)) {
return -EINVAL;
}
@@ -380,7 +381,8 @@
struct _hp_private *hp = &hp_private;
int i, io_pg_start, io_pg_count;
- if (type != 0 || mem->type != 0) {
+ if (type != mem->type ||
+ agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type)) {
return -EINVAL;
}
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 1d2ebc7..0689bf6 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -60,6 +60,19 @@
If unsure, say Y.
+config HW_RANDOM_ATMEL
+ tristate "Atmel Random Number Generator support"
+ depends on HW_RANDOM && ARCH_AT91SAM9G45
+ default HW_RANDOM
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Atmel AT91 devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atmel-rng.
+
+ If unsure, say Y.
+
config HW_RANDOM_GEODE
tristate "AMD Geode HW Random Number Generator support"
depends on HW_RANDOM && X86_32 && PCI
@@ -222,3 +235,18 @@
module will be called ppc4xx-rng.
If unsure, say N.
+
+config UML_RANDOM
+ depends on UML
+ tristate "Hardware random number generator"
+ help
+ This option enables UML's "hardware" random number generator. It
+ attaches itself to the host's /dev/random, supplying as much entropy
+ as the host has, rather than the small amount the UML gets from its
+ own drivers. It registers itself as a standard hardware random number
+ generator, major 10, minor 183, and the canonical device name is
+ /dev/hwrng.
+ The way to make use of this is to install the rng-tools package
+ (check your distro, or download from
+ http://sourceforge.net/projects/gkernel/). rngd periodically reads
+ /dev/hwrng and injects the entropy into /dev/random.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index c88f244..b2ff526 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += timeriomem-rng.o
obj-$(CONFIG_HW_RANDOM_INTEL) += intel-rng.o
obj-$(CONFIG_HW_RANDOM_AMD) += amd-rng.o
+obj-$(CONFIG_HW_RANDOM_ATMEL) += atmel-rng.o
obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
obj-$(CONFIG_HW_RANDOM_N2RNG) += n2-rng.o
n2-rng-y := n2-drv.o n2-asm.o
diff --git a/drivers/char/hw_random/atmel-rng.c b/drivers/char/hw_random/atmel-rng.c
new file mode 100644
index 0000000..241df2e
--- /dev/null
+++ b/drivers/char/hw_random/atmel-rng.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2011 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/hw_random.h>
+#include <linux/platform_device.h>
+
+#define TRNG_CR 0x00
+#define TRNG_ISR 0x1c
+#define TRNG_ODATA 0x50
+
+#define TRNG_KEY 0x524e4700 /* RNG */
+
+struct atmel_trng {
+ struct clk *clk;
+ void __iomem *base;
+ struct hwrng rng;
+};
+
+static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
+ bool wait)
+{
+ struct atmel_trng *trng = container_of(rng, struct atmel_trng, rng);
+ u32 *data = buf;
+
+ /* data ready? */
+ if (readl(trng->base + TRNG_ODATA) & 1) {
+ *data = readl(trng->base + TRNG_ODATA);
+ return 4;
+ } else
+ return 0;
+}
+
+static int atmel_trng_probe(struct platform_device *pdev)
+{
+ struct atmel_trng *trng;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ trng = devm_kzalloc(&pdev->dev, sizeof(*trng), GFP_KERNEL);
+ if (!trng)
+ return -ENOMEM;
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name))
+ return -EBUSY;
+
+ trng->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!trng->base)
+ return -EBUSY;
+
+ trng->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(trng->clk))
+ return PTR_ERR(trng->clk);
+
+ ret = clk_enable(trng->clk);
+ if (ret)
+ goto err_enable;
+
+ writel(TRNG_KEY | 1, trng->base + TRNG_CR);
+ trng->rng.name = pdev->name;
+ trng->rng.read = atmel_trng_read;
+
+ ret = hwrng_register(&trng->rng);
+ if (ret)
+ goto err_register;
+
+ platform_set_drvdata(pdev, trng);
+
+ return 0;
+
+err_register:
+ clk_disable(trng->clk);
+err_enable:
+ clk_put(trng->clk);
+
+ return ret;
+}
+
+static int __devexit atmel_trng_remove(struct platform_device *pdev)
+{
+ struct atmel_trng *trng = platform_get_drvdata(pdev);
+
+ hwrng_unregister(&trng->rng);
+
+ writel(TRNG_KEY, trng->base + TRNG_CR);
+ clk_disable(trng->clk);
+ clk_put(trng->clk);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_trng_suspend(struct device *dev)
+{
+ struct atmel_trng *trng = dev_get_drvdata(dev);
+
+ clk_disable(trng->clk);
+
+ return 0;
+}
+
+static int atmel_trng_resume(struct device *dev)
+{
+ struct atmel_trng *trng = dev_get_drvdata(dev);
+
+ return clk_enable(trng->clk);
+}
+
+static const struct dev_pm_ops atmel_trng_pm_ops = {
+ .suspend = atmel_trng_suspend,
+ .resume = atmel_trng_resume,
+};
+#endif /* CONFIG_PM */
+
+static struct platform_driver atmel_trng_driver = {
+ .probe = atmel_trng_probe,
+ .remove = __devexit_p(atmel_trng_remove),
+ .driver = {
+ .name = "atmel-trng",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &atmel_trng_pm_ops,
+#endif /* CONFIG_PM */
+ },
+};
+
+static int __init atmel_trng_init(void)
+{
+ return platform_driver_register(&atmel_trng_driver);
+}
+module_init(atmel_trng_init);
+
+static void __exit atmel_trng_exit(void)
+{
+ platform_driver_unregister(&atmel_trng_driver);
+}
+module_exit(atmel_trng_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("Atmel true random number generator driver");
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index a1f68af..f228615 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -170,7 +170,7 @@
.ioctl = tpk_ioctl,
};
-struct tty_port_operations null_ops = { };
+static struct tty_port_operations null_ops = { };
static struct tty_driver *ttyprintk_driver;
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index fb68b12..4ca181f 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -19,8 +19,10 @@
*/
#include <linux/cdev.h>
#include <linux/debugfs.h>
+#include <linux/completion.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/freezer.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/list.h>
@@ -73,6 +75,7 @@
static struct ports_driver_data pdrvdata;
DEFINE_SPINLOCK(pdrvdata_lock);
+DECLARE_COMPLETION(early_console_added);
/* This struct holds information that's relevant only for console ports */
struct console {
@@ -151,6 +154,10 @@
int chr_major;
};
+struct port_stats {
+ unsigned long bytes_sent, bytes_received, bytes_discarded;
+};
+
/* This struct holds the per-port data */
struct port {
/* Next port in the list, head is in the ports_device */
@@ -179,6 +186,13 @@
struct dentry *debugfs_file;
/*
+ * Keep count of the bytes sent, received and discarded for
+ * this port for accounting and debugging purposes. These
+ * counts are not reset across port open / close events.
+ */
+ struct port_stats stats;
+
+ /*
* The entries in this struct will be valid if this port is
* hooked up to an hvc console
*/
@@ -347,17 +361,19 @@
}
/* Callers should take appropriate locks */
-static void *get_inbuf(struct port *port)
+static struct port_buffer *get_inbuf(struct port *port)
{
struct port_buffer *buf;
- struct virtqueue *vq;
unsigned int len;
- vq = port->in_vq;
- buf = virtqueue_get_buf(vq, &len);
+ if (port->inbuf)
+ return port->inbuf;
+
+ buf = virtqueue_get_buf(port->in_vq, &len);
if (buf) {
buf->len = len;
buf->offset = 0;
+ port->stats.bytes_received += len;
}
return buf;
}
@@ -384,32 +400,27 @@
static void discard_port_data(struct port *port)
{
struct port_buffer *buf;
- struct virtqueue *vq;
- unsigned int len;
- int ret;
+ unsigned int err;
if (!port->portdev) {
/* Device has been unplugged. vqs are already gone. */
return;
}
- vq = port->in_vq;
- if (port->inbuf)
- buf = port->inbuf;
- else
- buf = virtqueue_get_buf(vq, &len);
+ buf = get_inbuf(port);
- ret = 0;
+ err = 0;
while (buf) {
- if (add_inbuf(vq, buf) < 0) {
- ret++;
+ port->stats.bytes_discarded += buf->len - buf->offset;
+ if (add_inbuf(port->in_vq, buf) < 0) {
+ err++;
free_buf(buf);
}
- buf = virtqueue_get_buf(vq, &len);
+ port->inbuf = NULL;
+ buf = get_inbuf(port);
}
- port->inbuf = NULL;
- if (ret)
+ if (err)
dev_warn(port->dev, "Errors adding %d buffers back to vq\n",
- ret);
+ err);
}
static bool port_has_data(struct port *port)
@@ -417,18 +428,12 @@
unsigned long flags;
bool ret;
- spin_lock_irqsave(&port->inbuf_lock, flags);
- if (port->inbuf) {
- ret = true;
- goto out;
- }
- port->inbuf = get_inbuf(port);
- if (port->inbuf) {
- ret = true;
- goto out;
- }
ret = false;
-out:
+ spin_lock_irqsave(&port->inbuf_lock, flags);
+ port->inbuf = get_inbuf(port);
+ if (port->inbuf)
+ ret = true;
+
spin_unlock_irqrestore(&port->inbuf_lock, flags);
return ret;
}
@@ -529,6 +534,8 @@
cpu_relax();
done:
spin_unlock_irqrestore(&port->outvq_lock, flags);
+
+ port->stats.bytes_sent += in_count;
/*
* We're expected to return the amount of data we wrote -- all
* of it
@@ -633,8 +640,8 @@
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
- ret = wait_event_interruptible(port->waitqueue,
- !will_read_block(port));
+ ret = wait_event_freezable(port->waitqueue,
+ !will_read_block(port));
if (ret < 0)
return ret;
}
@@ -677,8 +684,8 @@
if (nonblock)
return -EAGAIN;
- ret = wait_event_interruptible(port->waitqueue,
- !will_write_block(port));
+ ret = wait_event_freezable(port->waitqueue,
+ !will_write_block(port));
if (ret < 0)
return ret;
}
@@ -1059,6 +1066,14 @@
out_offset += snprintf(buf + out_offset, out_count - out_offset,
"outvq_full: %d\n", port->outvq_full);
out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "bytes_sent: %lu\n", port->stats.bytes_sent);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "bytes_received: %lu\n",
+ port->stats.bytes_received);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
+ "bytes_discarded: %lu\n",
+ port->stats.bytes_discarded);
+ out_offset += snprintf(buf + out_offset, out_count - out_offset,
"is_console: %s\n",
is_console_port(port) ? "yes" : "no");
out_offset += snprintf(buf + out_offset, out_count - out_offset,
@@ -1143,6 +1158,7 @@
port->cons.ws.ws_row = port->cons.ws.ws_col = 0;
port->host_connected = port->guest_connected = false;
+ port->stats = (struct port_stats) { 0 };
port->outvq_full = false;
@@ -1352,6 +1368,7 @@
break;
init_port_console(port);
+ complete(&early_console_added);
/*
* Could remove the port here in case init fails - but
* have to notify the host first.
@@ -1394,6 +1411,13 @@
break;
case VIRTIO_CONSOLE_PORT_NAME:
/*
+ * If we woke up after hibernation, we can get this
+ * again. Skip it in that case.
+ */
+ if (port->name)
+ break;
+
+ /*
* Skip the size of the header and the cpkt to get the size
* of the name that was sent
*/
@@ -1481,8 +1505,7 @@
return;
spin_lock_irqsave(&port->inbuf_lock, flags);
- if (!port->inbuf)
- port->inbuf = get_inbuf(port);
+ port->inbuf = get_inbuf(port);
/*
* Don't queue up data when port is closed. This condition
@@ -1563,7 +1586,7 @@
portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
GFP_KERNEL);
if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
- !portdev->out_vqs) {
+ !portdev->out_vqs) {
err = -ENOMEM;
goto free;
}
@@ -1648,6 +1671,10 @@
struct ports_device *portdev;
int err;
bool multiport;
+ bool early = early_put_chars != NULL;
+
+ /* Ensure to read early_put_chars now */
+ barrier();
portdev = kmalloc(sizeof(*portdev), GFP_KERNEL);
if (!portdev) {
@@ -1675,13 +1702,11 @@
multiport = false;
portdev->config.max_nr_ports = 1;
- if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
+ if (virtio_config_val(vdev, VIRTIO_CONSOLE_F_MULTIPORT,
+ offsetof(struct virtio_console_config,
+ max_nr_ports),
+ &portdev->config.max_nr_ports) == 0)
multiport = true;
- vdev->config->get(vdev, offsetof(struct virtio_console_config,
- max_nr_ports),
- &portdev->config.max_nr_ports,
- sizeof(portdev->config.max_nr_ports));
- }
err = init_vqs(portdev);
if (err < 0) {
@@ -1719,6 +1744,19 @@
__send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
VIRTIO_CONSOLE_DEVICE_READY, 1);
+
+ /*
+ * If there was an early virtio console, assume that there are no
+ * other consoles. We need to wait until the hvc_alloc matches the
+ * hvc_instantiate, otherwise tty_open will complain, resulting in
+ * a "Warning: unable to open an initial console" boot failure.
+ * Without multiport this is done in add_port above. With multiport
+ * this might take some host<->guest communication - thus we have to
+ * wait.
+ */
+ if (multiport && early)
+ wait_for_completion(&early_console_added);
+
return 0;
free_vqs:
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 34e9c4f..999d6a0 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -15,3 +15,18 @@
config DW_APB_TIMER
bool
+
+config CLKSRC_DBX500_PRCMU
+ bool "Clocksource PRCMU Timer"
+ depends on UX500_SOC_DB5500 || UX500_SOC_DB8500
+ default y
+ help
+ Use the always on PRCMU Timer as clocksource
+
+config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
+ bool "Clocksource PRCMU Timer sched_clock"
+ depends on (CLKSRC_DBX500_PRCMU && !NOMADIK_MTU_SCHED_CLOCK)
+ select HAVE_SCHED_CLOCK
+ default y
+ help
+ Use the always on PRCMU Timer as sched_clock
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 85ad1646..8d81a1d 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
+obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
\ No newline at end of file
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
new file mode 100644
index 0000000..59feefe
--- /dev/null
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer for ST-Ericsson
+ * sched_clock implementation is based on:
+ * plat-nomadik/timer.c Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * DBx500-PRCMU Timer
+ * The PRCMU has 5 timers which are available in a always-on
+ * power domain. We use the Timer 4 for our always-on clock
+ * source on DB8500 and Timer 3 on DB5500.
+ */
+#include <linux/clockchips.h>
+#include <linux/clksrc-dbx500-prcmu.h>
+
+#include <asm/sched_clock.h>
+
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+#define RATE_32K 32768
+
+#define TIMER_MODE_CONTINOUS 0x1
+#define TIMER_DOWNCOUNT_VAL 0xffffffff
+
+#define PRCMU_TIMER_REF 0
+#define PRCMU_TIMER_DOWNCOUNT 0x4
+#define PRCMU_TIMER_MODE 0x8
+
+#define SCHED_CLOCK_MIN_WRAP 131072 /* 2^32 / 32768 */
+
+static void __iomem *clksrc_dbx500_timer_base;
+
+static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs)
+{
+ u32 count, count2;
+
+ do {
+ count = readl(clksrc_dbx500_timer_base +
+ PRCMU_TIMER_DOWNCOUNT);
+ count2 = readl(clksrc_dbx500_timer_base +
+ PRCMU_TIMER_DOWNCOUNT);
+ } while (count2 != count);
+
+ /* Negate because the timer is a decrementing counter */
+ return ~count;
+}
+
+static struct clocksource clocksource_dbx500_prcmu = {
+ .name = "dbx500-prcmu-timer",
+ .rating = 300,
+ .read = clksrc_dbx500_prcmu_read,
+ .shift = 10,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
+static DEFINE_CLOCK_DATA(cd);
+
+unsigned long long notrace sched_clock(void)
+{
+ u32 cyc;
+
+ if (unlikely(!clksrc_dbx500_timer_base))
+ return 0;
+
+ cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
+
+ return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace clksrc_dbx500_prcmu_update_sched_clock(void)
+{
+ u32 cyc = clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
+ update_sched_clock(&cd, cyc, (u32)~0);
+}
+#endif
+
+void __init clksrc_dbx500_prcmu_init(void __iomem *base)
+{
+ clksrc_dbx500_timer_base = base;
+
+ /*
+ * The A9 sub system expects the timer to be configured as
+ * a continous looping timer.
+ * The PRCMU should configure it but if it for some reason
+ * don't we do it here.
+ */
+ if (readl(clksrc_dbx500_timer_base + PRCMU_TIMER_MODE) !=
+ TIMER_MODE_CONTINOUS) {
+ writel(TIMER_MODE_CONTINOUS,
+ clksrc_dbx500_timer_base + PRCMU_TIMER_MODE);
+ writel(TIMER_DOWNCOUNT_VAL,
+ clksrc_dbx500_timer_base + PRCMU_TIMER_REF);
+ }
+#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
+ init_sched_clock(&cd, clksrc_dbx500_prcmu_update_sched_clock,
+ 32, RATE_32K);
+#endif
+ clocksource_calc_mult_shift(&clocksource_dbx500_prcmu,
+ RATE_32K, SCHED_CLOCK_MIN_WRAP);
+ clocksource_register(&clocksource_dbx500_prcmu);
+}
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index d90456a..edaa987 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -12,30 +12,35 @@
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <mach/id.h>
static struct cpufreq_frequency_table freq_table[] = {
[0] = {
.index = 0,
- .frequency = 300000,
+ .frequency = 200000,
},
[1] = {
.index = 1,
- .frequency = 600000,
+ .frequency = 300000,
},
[2] = {
- /* Used for MAX_OPP, if available */
.index = 2,
- .frequency = CPUFREQ_TABLE_END,
+ .frequency = 600000,
},
[3] = {
+ /* Used for MAX_OPP, if available */
.index = 3,
.frequency = CPUFREQ_TABLE_END,
},
+ [4] = {
+ .index = 4,
+ .frequency = CPUFREQ_TABLE_END,
+ },
};
static enum arm_opp idx2opp[] = {
+ ARM_EXTCLK,
ARM_50_OPP,
ARM_100_OPP,
ARM_MAX_OPP
@@ -72,13 +77,13 @@
freqs.old = policy->cur;
freqs.new = freq_table[idx].frequency;
- freqs.cpu = policy->cpu;
if (freqs.old == freqs.new)
return 0;
/* pre-change notification */
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* request the PRCM unit for opp change */
if (prcmu_set_arm_opp(idx2opp[idx])) {
@@ -87,7 +92,8 @@
}
/* post change notification */
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ for_each_cpu(freqs.cpu, policy->cpus)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return 0;
}
@@ -104,16 +110,18 @@
static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
{
int res;
- int i;
BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
- if (cpu_is_u8500v2() && !prcmu_is_u8400()) {
- freq_table[0].frequency = 400000;
- freq_table[1].frequency = 800000;
+ if (!prcmu_is_u8400()) {
+ freq_table[1].frequency = 400000;
+ freq_table[2].frequency = 800000;
if (prcmu_has_arm_maxopp())
- freq_table[2].frequency = 1000000;
+ freq_table[3].frequency = 1000000;
}
+ pr_info("db8500-cpufreq : Available frequencies:\n");
+ while (freq_table[i].frequency != CPUFREQ_TABLE_END)
+ pr_info(" %d Mhz\n", freq_table[i++].frequency/1000);
/* get policy fields based on the table */
res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -127,10 +135,6 @@
policy->min = policy->cpuinfo.min_freq;
policy->max = policy->cpuinfo.max_freq;
policy->cur = db8500_cpufreq_getspeed(policy->cpu);
-
- for (i = 0; freq_table[i].frequency != policy->cur; i++)
- ;
-
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
/*
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 35a257d..4bd6815 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -19,6 +19,11 @@
#include <asm/msr.h>
#include <asm/tsc.h>
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
#define EPS_BRAND_C7M 0
#define EPS_BRAND_C7 1
#define EPS_BRAND_EDEN 2
@@ -27,11 +32,59 @@
struct eps_cpu_data {
u32 fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ u32 bios_limit;
+#endif
struct cpufreq_frequency_table freq_table[];
};
static struct eps_cpu_data *eps_cpu[NR_CPUS];
+/* Module parameters */
+static int freq_failsafe_off;
+static int voltage_failsafe_off;
+static int set_max_voltage;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+static int ignore_acpi_limit;
+
+static struct acpi_processor_performance *eps_acpi_cpu_perf;
+
+/* Minimum necessary to get acpi_processor_get_bios_limit() working */
+static int eps_acpi_init(void)
+{
+ eps_acpi_cpu_perf = kzalloc(sizeof(struct acpi_processor_performance),
+ GFP_KERNEL);
+ if (!eps_acpi_cpu_perf)
+ return -ENOMEM;
+
+ if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map,
+ GFP_KERNEL)) {
+ kfree(eps_acpi_cpu_perf);
+ eps_acpi_cpu_perf = NULL;
+ return -ENOMEM;
+ }
+
+ if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) {
+ free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+ kfree(eps_acpi_cpu_perf);
+ eps_acpi_cpu_perf = NULL;
+ return -EIO;
+ }
+ return 0;
+}
+
+static int eps_acpi_exit(struct cpufreq_policy *policy)
+{
+ if (eps_acpi_cpu_perf) {
+ acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0);
+ free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+ kfree(eps_acpi_cpu_perf);
+ eps_acpi_cpu_perf = NULL;
+ }
+ return 0;
+}
+#endif
static unsigned int eps_get(unsigned int cpu)
{
@@ -164,6 +217,9 @@
int k, step, voltage;
int ret;
int states;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ unsigned int limit;
+#endif
if (policy->cpu != 0)
return -ENODEV;
@@ -244,11 +300,62 @@
return -EINVAL;
if (current_voltage > 0x1f || max_voltage > 0x1f)
return -EINVAL;
- if (max_voltage < min_voltage)
+ if (max_voltage < min_voltage
+ || current_voltage < min_voltage
+ || current_voltage > max_voltage)
return -EINVAL;
+ /* Check for systems using underclocked CPU */
+ if (!freq_failsafe_off && max_multiplier != current_multiplier) {
+ printk(KERN_INFO "eps: Your processor is running at different "
+ "frequency then its maximum. Aborting.\n");
+ printk(KERN_INFO "eps: You can use freq_failsafe_off option "
+ "to disable this check.\n");
+ return -EINVAL;
+ }
+ if (!voltage_failsafe_off && max_voltage != current_voltage) {
+ printk(KERN_INFO "eps: Your processor is running at different "
+ "voltage then its maximum. Aborting.\n");
+ printk(KERN_INFO "eps: You can use voltage_failsafe_off "
+ "option to disable this check.\n");
+ return -EINVAL;
+ }
+
/* Calc FSB speed */
fsb = cpu_khz / current_multiplier;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ /* Check for ACPI processor speed limit */
+ if (!ignore_acpi_limit && !eps_acpi_init()) {
+ if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
+ printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+ limit/1000000,
+ (limit%1000000)/10000);
+ eps_acpi_exit(policy);
+ /* Check if max_multiplier is in BIOS limits */
+ if (limit && max_multiplier * fsb > limit) {
+ printk(KERN_INFO "eps: Aborting.\n");
+ return -EINVAL;
+ }
+ }
+ }
+#endif
+
+ /* Allow user to set lower maximum voltage then that reported
+ * by processor */
+ if (brand == EPS_BRAND_C7M && set_max_voltage) {
+ u32 v;
+
+ /* Change mV to something hardware can use */
+ v = (set_max_voltage - 700) / 16;
+ /* Check if voltage is within limits */
+ if (v >= min_voltage && v <= max_voltage) {
+ printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
+ v * 16 + 700);
+ max_voltage = v;
+ }
+ }
+
/* Calc number of p-states supported */
if (brand == EPS_BRAND_C7M)
states = max_multiplier - min_multiplier + 1;
@@ -265,6 +372,9 @@
/* Copy basic values */
centaur->fsb = fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+ centaur->bios_limit = limit;
+#endif
/* Fill frequency and MSR value table */
f_table = ¢aur->freq_table[0];
@@ -303,17 +413,7 @@
static int eps_cpu_exit(struct cpufreq_policy *policy)
{
unsigned int cpu = policy->cpu;
- struct eps_cpu_data *centaur;
- u32 lo, hi;
- if (eps_cpu[cpu] == NULL)
- return -ENODEV;
- centaur = eps_cpu[cpu];
-
- /* Get max frequency */
- rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
- /* Set max frequency */
- eps_set_state(centaur, cpu, hi & 0xffff);
/* Bye */
cpufreq_frequency_table_put_attr(policy->cpu);
kfree(eps_cpu[cpu]);
@@ -359,6 +459,19 @@
cpufreq_unregister_driver(&eps_driver);
}
+/* Allow user to overclock his machine or to change frequency to higher after
+ * unloading module */
+module_param(freq_failsafe_off, int, 0644);
+MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
+module_param(voltage_failsafe_off, int, 0644);
+MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+module_param(ignore_acpi_limit, int, 0644);
+MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
+#endif
+module_param(set_max_voltage, int, 0644);
+MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only");
+
MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index b7c3a84..ab9741f 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -17,6 +17,8 @@
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
+#include <linux/notifier.h>
+#include <linux/suspend.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
@@ -36,6 +38,10 @@
static struct cpufreq_freqs freqs;
static unsigned int memtype;
+static unsigned int locking_frequency;
+static bool frequency_locked;
+static DEFINE_MUTEX(cpufreq_lock);
+
enum exynos4_memory_type {
DDR2 = 4,
LPDDR2,
@@ -405,22 +411,32 @@
{
unsigned int index, old_index;
unsigned int arm_volt, int_volt;
+ int err = -EINVAL;
freqs.old = exynos4_getspeed(policy->cpu);
+ mutex_lock(&cpufreq_lock);
+
+ if (frequency_locked && target_freq != locking_frequency) {
+ err = -EAGAIN;
+ goto out;
+ }
+
if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
freqs.old, relation, &old_index))
- return -EINVAL;
+ goto out;
if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
target_freq, relation, &index))
- return -EINVAL;
+ goto out;
+
+ err = 0;
freqs.new = exynos4_freq_table[index].frequency;
freqs.cpu = policy->cpu;
if (freqs.new == freqs.old)
- return 0;
+ goto out;
/* get the voltage value */
arm_volt = exynos4_volt_table[index].arm_volt;
@@ -447,10 +463,16 @@
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- return 0;
+out:
+ mutex_unlock(&cpufreq_lock);
+ return err;
}
#ifdef CONFIG_PM
+/*
+ * These suspend/resume are used as syscore_ops, it is already too
+ * late to set regulator voltages at this stage.
+ */
static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
{
return 0;
@@ -462,8 +484,82 @@
}
#endif
+/**
+ * exynos4_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
+ * context
+ * @notifier
+ * @pm_event
+ * @v
+ *
+ * While frequency_locked == true, target() ignores every frequency but
+ * locking_frequency. The locking_frequency value is the initial frequency,
+ * which is set by the bootloader. In order to eliminate possible
+ * inconsistency in clock values, we save and restore frequencies during
+ * suspend and resume and block CPUFREQ activities. Note that the standard
+ * suspend/resume cannot be used as they are too deep (syscore_ops) for
+ * regulator actions.
+ */
+static int exynos4_cpufreq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *v)
+{
+ struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
+ static unsigned int saved_frequency;
+ unsigned int temp;
+
+ mutex_lock(&cpufreq_lock);
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ if (frequency_locked)
+ goto out;
+ frequency_locked = true;
+
+ if (locking_frequency) {
+ saved_frequency = exynos4_getspeed(0);
+
+ mutex_unlock(&cpufreq_lock);
+ exynos4_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+ }
+
+ break;
+ case PM_POST_SUSPEND:
+
+ if (saved_frequency) {
+ /*
+ * While frequency_locked, only locking_frequency
+ * is valid for target(). In order to use
+ * saved_frequency while keeping frequency_locked,
+ * we temporarly overwrite locking_frequency.
+ */
+ temp = locking_frequency;
+ locking_frequency = saved_frequency;
+
+ mutex_unlock(&cpufreq_lock);
+ exynos4_target(policy, locking_frequency,
+ CPUFREQ_RELATION_H);
+ mutex_lock(&cpufreq_lock);
+
+ locking_frequency = temp;
+ }
+
+ frequency_locked = false;
+ break;
+ }
+out:
+ mutex_unlock(&cpufreq_lock);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block exynos4_cpufreq_nb = {
+ .notifier_call = exynos4_cpufreq_pm_notifier,
+};
+
static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
+ int ret;
+
policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
@@ -479,16 +575,35 @@
*/
cpumask_setall(policy->cpus);
- return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+ ret = cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+ if (ret)
+ return ret;
+
+ cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
+
+ return 0;
}
+static int exynos4_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *exynos4_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
static struct cpufreq_driver exynos4_driver = {
.flags = CPUFREQ_STICKY,
.verify = exynos4_verify_speed,
.target = exynos4_target,
.get = exynos4_getspeed,
.init = exynos4_cpufreq_cpu_init,
+ .exit = exynos4_cpufreq_cpu_exit,
.name = "exynos4_cpufreq",
+ .attr = exynos4_cpufreq_attr,
#ifdef CONFIG_PM
.suspend = exynos4_cpufreq_suspend,
.resume = exynos4_cpufreq_resume,
@@ -501,6 +616,8 @@
if (IS_ERR(cpu_clk))
return PTR_ERR(cpu_clk);
+ locking_frequency = exynos4_getspeed(0);
+
moutcore = clk_get(NULL, "moutcore");
if (IS_ERR(moutcore))
goto out;
@@ -540,6 +657,8 @@
printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
}
+ register_pm_notifier(&exynos4_cpufreq_nb);
+
return cpufreq_register_driver(&exynos4_driver);
out:
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 6815905..ddc2a13 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1307,6 +1307,7 @@
ipu_submit_buffer(ichan, descnew, sgnew, ichan->active_buffer) < 0) {
callback = descnew->txd.callback;
callback_param = descnew->txd.callback_param;
+ list_del_init(&descnew->list);
spin_unlock(&ichan->lock);
if (callback)
callback(callback_param);
@@ -1428,39 +1429,58 @@
{
struct idmac_channel *ichan = to_idmac_chan(chan);
struct idmac *idmac = to_idmac(chan->device);
+ struct ipu *ipu = to_ipu(idmac);
+ struct list_head *list, *tmp;
unsigned long flags;
int i;
- /* Only supports DMA_TERMINATE_ALL */
- if (cmd != DMA_TERMINATE_ALL)
- return -ENXIO;
+ switch (cmd) {
+ case DMA_PAUSE:
+ spin_lock_irqsave(&ipu->lock, flags);
+ ipu_ic_disable_task(ipu, chan->chan_id);
- ipu_disable_channel(idmac, ichan,
- ichan->status >= IPU_CHANNEL_ENABLED);
+ /* Return all descriptors into "prepared" state */
+ list_for_each_safe(list, tmp, &ichan->queue)
+ list_del_init(list);
- tasklet_disable(&to_ipu(idmac)->tasklet);
+ ichan->sg[0] = NULL;
+ ichan->sg[1] = NULL;
- /* ichan->queue is modified in ISR, have to spinlock */
- spin_lock_irqsave(&ichan->lock, flags);
- list_splice_init(&ichan->queue, &ichan->free_list);
+ spin_unlock_irqrestore(&ipu->lock, flags);
- if (ichan->desc)
- for (i = 0; i < ichan->n_tx_desc; i++) {
- struct idmac_tx_desc *desc = ichan->desc + i;
- if (list_empty(&desc->list))
- /* Descriptor was prepared, but not submitted */
- list_add(&desc->list, &ichan->free_list);
+ ichan->status = IPU_CHANNEL_INITIALIZED;
+ break;
+ case DMA_TERMINATE_ALL:
+ ipu_disable_channel(idmac, ichan,
+ ichan->status >= IPU_CHANNEL_ENABLED);
- async_tx_clear_ack(&desc->txd);
- }
+ tasklet_disable(&ipu->tasklet);
- ichan->sg[0] = NULL;
- ichan->sg[1] = NULL;
- spin_unlock_irqrestore(&ichan->lock, flags);
+ /* ichan->queue is modified in ISR, have to spinlock */
+ spin_lock_irqsave(&ichan->lock, flags);
+ list_splice_init(&ichan->queue, &ichan->free_list);
- tasklet_enable(&to_ipu(idmac)->tasklet);
+ if (ichan->desc)
+ for (i = 0; i < ichan->n_tx_desc; i++) {
+ struct idmac_tx_desc *desc = ichan->desc + i;
+ if (list_empty(&desc->list))
+ /* Descriptor was prepared, but not submitted */
+ list_add(&desc->list, &ichan->free_list);
- ichan->status = IPU_CHANNEL_INITIALIZED;
+ async_tx_clear_ack(&desc->txd);
+ }
+
+ ichan->sg[0] = NULL;
+ ichan->sg[1] = NULL;
+ spin_unlock_irqrestore(&ichan->lock, flags);
+
+ tasklet_enable(&ipu->tasklet);
+
+ ichan->status = IPU_CHANNEL_INITIALIZED;
+ break;
+ default:
+ return -ENOSYS;
+ }
return 0;
}
@@ -1663,7 +1683,6 @@
struct idmac_channel *ichan = ipu->channel + i;
idmac_control(&ichan->dma_chan, DMA_TERMINATE_ALL, 0);
- idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0);
}
dma_async_device_unregister(&idmac->dma);
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index af1a17d..5948a21 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -41,7 +41,7 @@
config EDAC_DECODE_MCE
tristate "Decode MCEs in human-readable form (only on AMD for now)"
- depends on CPU_SUP_AMD && X86_MCE
+ depends on CPU_SUP_AMD && X86_MCE_AMD
default y
---help---
Enable this option if you want to decode Machine Check Exceptions
@@ -71,9 +71,6 @@
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
-config EDAC_MCE
- bool
-
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64) K8, F10h"
depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE
@@ -173,8 +170,7 @@
config EDAC_I7CORE
tristate "Intel i7 Core (Nehalem) processors"
- depends on EDAC_MM_EDAC && PCI && X86
- select EDAC_MCE
+ depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
help
Support for error detection and correction the Intel
i7 Core (Nehalem) Integrated Memory Controller that exists on
@@ -216,6 +212,14 @@
Support for error detection and correction the Intel
Clarksboro MCH (Intel 7300 chipset).
+config EDAC_SBRIDGE
+ tristate "Intel Sandy-Bridge Integrated MC"
+ depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL
+ depends on EXPERIMENTAL
+ help
+ Support for error detection and correction the Intel
+ Sandy Bridge Integrated Memory Controller.
+
config EDAC_MPC85XX
tristate "Freescale MPC83xx / MPC85xx"
depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 3e23913..196a63d 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -8,7 +8,6 @@
obj-$(CONFIG_EDAC) := edac_stub.o
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
-obj-$(CONFIG_EDAC_MCE) += edac_mce.o
edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
edac_core-y += edac_module.o edac_device_sysfs.o
@@ -29,6 +28,7 @@
obj-$(CONFIG_EDAC_I5400) += i5400_edac.o
obj-$(CONFIG_EDAC_I7300) += i7300_edac.o
obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o
+obj-$(CONFIG_EDAC_SBRIDGE) += sb_edac.o
obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o
obj-$(CONFIG_EDAC_E752X) += e752x_edac.o
obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 55b8278..fe90cd4 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -34,11 +34,10 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/workqueue.h>
+#include <linux/edac.h>
-#define EDAC_MC_LABEL_LEN 31
#define EDAC_DEVICE_NAME_LEN 31
#define EDAC_ATTRIB_VALUE_LEN 15
-#define MC_PROC_NAME_MAX_LEN 7
#if PAGE_SHIFT < 20
#define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT))
@@ -101,353 +100,6 @@
#define edac_dev_name(dev) (dev)->dev_name
-/* memory devices */
-enum dev_type {
- DEV_UNKNOWN = 0,
- DEV_X1,
- DEV_X2,
- DEV_X4,
- DEV_X8,
- DEV_X16,
- DEV_X32, /* Do these parts exist? */
- DEV_X64 /* Do these parts exist? */
-};
-
-#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN)
-#define DEV_FLAG_X1 BIT(DEV_X1)
-#define DEV_FLAG_X2 BIT(DEV_X2)
-#define DEV_FLAG_X4 BIT(DEV_X4)
-#define DEV_FLAG_X8 BIT(DEV_X8)
-#define DEV_FLAG_X16 BIT(DEV_X16)
-#define DEV_FLAG_X32 BIT(DEV_X32)
-#define DEV_FLAG_X64 BIT(DEV_X64)
-
-/* memory types */
-enum mem_type {
- MEM_EMPTY = 0, /* Empty csrow */
- MEM_RESERVED, /* Reserved csrow type */
- MEM_UNKNOWN, /* Unknown csrow type */
- MEM_FPM, /* Fast page mode */
- MEM_EDO, /* Extended data out */
- MEM_BEDO, /* Burst Extended data out */
- MEM_SDR, /* Single data rate SDRAM */
- MEM_RDR, /* Registered single data rate SDRAM */
- MEM_DDR, /* Double data rate SDRAM */
- MEM_RDDR, /* Registered Double data rate SDRAM */
- MEM_RMBS, /* Rambus DRAM */
- MEM_DDR2, /* DDR2 RAM */
- MEM_FB_DDR2, /* fully buffered DDR2 */
- MEM_RDDR2, /* Registered DDR2 RAM */
- MEM_XDR, /* Rambus XDR */
- MEM_DDR3, /* DDR3 RAM */
- MEM_RDDR3, /* Registered DDR3 RAM */
-};
-
-#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
-#define MEM_FLAG_RESERVED BIT(MEM_RESERVED)
-#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN)
-#define MEM_FLAG_FPM BIT(MEM_FPM)
-#define MEM_FLAG_EDO BIT(MEM_EDO)
-#define MEM_FLAG_BEDO BIT(MEM_BEDO)
-#define MEM_FLAG_SDR BIT(MEM_SDR)
-#define MEM_FLAG_RDR BIT(MEM_RDR)
-#define MEM_FLAG_DDR BIT(MEM_DDR)
-#define MEM_FLAG_RDDR BIT(MEM_RDDR)
-#define MEM_FLAG_RMBS BIT(MEM_RMBS)
-#define MEM_FLAG_DDR2 BIT(MEM_DDR2)
-#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
-#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
-#define MEM_FLAG_XDR BIT(MEM_XDR)
-#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
-#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
-
-/* chipset Error Detection and Correction capabilities and mode */
-enum edac_type {
- EDAC_UNKNOWN = 0, /* Unknown if ECC is available */
- EDAC_NONE, /* Doesn't support ECC */
- EDAC_RESERVED, /* Reserved ECC type */
- EDAC_PARITY, /* Detects parity errors */
- EDAC_EC, /* Error Checking - no correction */
- EDAC_SECDED, /* Single bit error correction, Double detection */
- EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */
- EDAC_S4ECD4ED, /* Chipkill x4 devices */
- EDAC_S8ECD8ED, /* Chipkill x8 devices */
- EDAC_S16ECD16ED, /* Chipkill x16 devices */
-};
-
-#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
-#define EDAC_FLAG_NONE BIT(EDAC_NONE)
-#define EDAC_FLAG_PARITY BIT(EDAC_PARITY)
-#define EDAC_FLAG_EC BIT(EDAC_EC)
-#define EDAC_FLAG_SECDED BIT(EDAC_SECDED)
-#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED)
-#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED)
-#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
-#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)
-
-/* scrubbing capabilities */
-enum scrub_type {
- SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */
- SCRUB_NONE, /* No scrubber */
- SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */
- SCRUB_SW_SRC, /* Software scrub only errors */
- SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */
- SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */
- SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */
- SCRUB_HW_SRC, /* Hardware scrub only errors */
- SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */
- SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */
-};
-
-#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
-#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC)
-#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC)
-#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE)
-#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG)
-#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC)
-#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC)
-#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE)
-
-/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
-
-/* EDAC internal operation states */
-#define OP_ALLOC 0x100
-#define OP_RUNNING_POLL 0x201
-#define OP_RUNNING_INTERRUPT 0x202
-#define OP_RUNNING_POLL_INTR 0x203
-#define OP_OFFLINE 0x300
-
-/*
- * There are several things to be aware of that aren't at all obvious:
- *
- *
- * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
- *
- * These are some of the many terms that are thrown about that don't always
- * mean what people think they mean (Inconceivable!). In the interest of
- * creating a common ground for discussion, terms and their definitions
- * will be established.
- *
- * Memory devices: The individual chip on a memory stick. These devices
- * commonly output 4 and 8 bits each. Grouping several
- * of these in parallel provides 64 bits which is common
- * for a memory stick.
- *
- * Memory Stick: A printed circuit board that aggregates multiple
- * memory devices in parallel. This is the atomic
- * memory component that is purchaseable by Joe consumer
- * and loaded into a memory socket.
- *
- * Socket: A physical connector on the motherboard that accepts
- * a single memory stick.
- *
- * Channel: Set of memory devices on a memory stick that must be
- * grouped in parallel with one or more additional
- * channels from other memory sticks. This parallel
- * grouping of the output from multiple channels are
- * necessary for the smallest granularity of memory access.
- * Some memory controllers are capable of single channel -
- * which means that memory sticks can be loaded
- * individually. Other memory controllers are only
- * capable of dual channel - which means that memory
- * sticks must be loaded as pairs (see "socket set").
- *
- * Chip-select row: All of the memory devices that are selected together.
- * for a single, minimum grain of memory access.
- * This selects all of the parallel memory devices across
- * all of the parallel channels. Common chip-select rows
- * for single channel are 64 bits, for dual channel 128
- * bits.
- *
- * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
- * Motherboards commonly drive two chip-select pins to
- * a memory stick. A single-ranked stick, will occupy
- * only one of those rows. The other will be unused.
- *
- * Double-Ranked stick: A double-ranked stick has two chip-select rows which
- * access different sets of memory devices. The two
- * rows cannot be accessed concurrently.
- *
- * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
- * A double-sided stick has two chip-select rows which
- * access different sets of memory devices. The two
- * rows cannot be accessed concurrently. "Double-sided"
- * is irrespective of the memory devices being mounted
- * on both sides of the memory stick.
- *
- * Socket set: All of the memory sticks that are required for
- * a single memory access or all of the memory sticks
- * spanned by a chip-select row. A single socket set
- * has two chip-select rows and if double-sided sticks
- * are used these will occupy those chip-select rows.
- *
- * Bank: This term is avoided because it is unclear when
- * needing to distinguish between chip-select rows and
- * socket sets.
- *
- * Controller pages:
- *
- * Physical pages:
- *
- * Virtual pages:
- *
- *
- * STRUCTURE ORGANIZATION AND CHOICES
- *
- *
- *
- * PS - I enjoyed writing all that about as much as you enjoyed reading it.
- */
-
-struct channel_info {
- int chan_idx; /* channel index */
- u32 ce_count; /* Correctable Errors for this CHANNEL */
- char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */
- struct csrow_info *csrow; /* the parent */
-};
-
-struct csrow_info {
- unsigned long first_page; /* first page number in dimm */
- unsigned long last_page; /* last page number in dimm */
- unsigned long page_mask; /* used for interleaving -
- * 0UL for non intlv
- */
- u32 nr_pages; /* number of pages in csrow */
- u32 grain; /* granularity of reported error in bytes */
- int csrow_idx; /* the chip-select row */
- enum dev_type dtype; /* memory device type */
- u32 ue_count; /* Uncorrectable Errors for this csrow */
- u32 ce_count; /* Correctable Errors for this csrow */
- enum mem_type mtype; /* memory csrow type */
- enum edac_type edac_mode; /* EDAC mode for this csrow */
- struct mem_ctl_info *mci; /* the parent */
-
- struct kobject kobj; /* sysfs kobject for this csrow */
-
- /* channel information for this csrow */
- u32 nr_channels;
- struct channel_info *channels;
-};
-
-struct mcidev_sysfs_group {
- const char *name; /* group name */
- const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
-};
-
-struct mcidev_sysfs_group_kobj {
- struct list_head list; /* list for all instances within a mc */
-
- struct kobject kobj; /* kobj for the group */
-
- const struct mcidev_sysfs_group *grp; /* group description table */
- struct mem_ctl_info *mci; /* the parent */
-};
-
-/* mcidev_sysfs_attribute structure
- * used for driver sysfs attributes and in mem_ctl_info
- * sysfs top level entries
- */
-struct mcidev_sysfs_attribute {
- /* It should use either attr or grp */
- struct attribute attr;
- const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */
-
- /* Ops for show/store values at the attribute - not used on group */
- ssize_t (*show)(struct mem_ctl_info *,char *);
- ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
-};
-
-/* MEMORY controller information structure
- */
-struct mem_ctl_info {
- struct list_head link; /* for global list of mem_ctl_info structs */
-
- struct module *owner; /* Module owner of this control struct */
-
- unsigned long mtype_cap; /* memory types supported by mc */
- unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */
- unsigned long edac_cap; /* configuration capabilities - this is
- * closely related to edac_ctl_cap. The
- * difference is that the controller may be
- * capable of s4ecd4ed which would be listed
- * in edac_ctl_cap, but if channels aren't
- * capable of s4ecd4ed then the edac_cap would
- * not have that capability.
- */
- unsigned long scrub_cap; /* chipset scrub capabilities */
- enum scrub_type scrub_mode; /* current scrub mode */
-
- /* Translates sdram memory scrub rate given in bytes/sec to the
- internal representation and configures whatever else needs
- to be configured.
- */
- int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
-
- /* Get the current sdram memory scrub rate from the internal
- representation and converts it to the closest matching
- bandwidth in bytes/sec.
- */
- int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
-
-
- /* pointer to edac checking routine */
- void (*edac_check) (struct mem_ctl_info * mci);
-
- /*
- * Remaps memory pages: controller pages to physical pages.
- * For most MC's, this will be NULL.
- */
- /* FIXME - why not send the phys page to begin with? */
- unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
- unsigned long page);
- int mc_idx;
- int nr_csrows;
- struct csrow_info *csrows;
- /*
- * FIXME - what about controllers on other busses? - IDs must be
- * unique. dev pointer should be sufficiently unique, but
- * BUS:SLOT.FUNC numbers may not be unique.
- */
- struct device *dev;
- const char *mod_name;
- const char *mod_ver;
- const char *ctl_name;
- const char *dev_name;
- char proc_name[MC_PROC_NAME_MAX_LEN + 1];
- void *pvt_info;
- u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */
- u32 ce_noinfo_count; /* Correctable Errors w/o info */
- u32 ue_count; /* Total Uncorrectable Errors for this MC */
- u32 ce_count; /* Total Correctable Errors for this MC */
- unsigned long start_time; /* mci load start time (in jiffies) */
-
- struct completion complete;
-
- /* edac sysfs device control */
- struct kobject edac_mci_kobj;
-
- /* list for all grp instances within a mc */
- struct list_head grp_kobj_list;
-
- /* Additional top controller level attributes, but specified
- * by the low level driver.
- *
- * Set by the low level driver to provide attributes at the
- * controller level, same level as 'ue_count' and 'ce_count' above.
- * An array of structures, NULL terminated
- *
- * If attributes are desired, then set to array of attributes
- * If no attributes are desired, leave NULL
- */
- const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
-
- /* work struct for this MC */
- struct delayed_work work;
-
- /* the internal state of this controller instance */
- int op_state;
-};
-
/*
* The following are the structures to provide for a generic
* or abstract 'edac_device'. This set of structures and the
diff --git a/drivers/edac/edac_mce.c b/drivers/edac/edac_mce.c
deleted file mode 100644
index 9ccdc5b..0000000
--- a/drivers/edac/edac_mce.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* Provides edac interface to mcelog events
- *
- * This file may be distributed under the terms of the
- * GNU General Public License version 2.
- *
- * Copyright (c) 2009 by:
- * Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * Red Hat Inc. http://www.redhat.com
- */
-
-#include <linux/module.h>
-#include <linux/edac_mce.h>
-#include <asm/mce.h>
-
-int edac_mce_enabled;
-EXPORT_SYMBOL_GPL(edac_mce_enabled);
-
-
-/*
- * Extension interface
- */
-
-static LIST_HEAD(edac_mce_list);
-static DEFINE_MUTEX(edac_mce_lock);
-
-int edac_mce_register(struct edac_mce *edac_mce)
-{
- mutex_lock(&edac_mce_lock);
- list_add_tail(&edac_mce->list, &edac_mce_list);
- mutex_unlock(&edac_mce_lock);
- return 0;
-}
-EXPORT_SYMBOL(edac_mce_register);
-
-void edac_mce_unregister(struct edac_mce *edac_mce)
-{
- mutex_lock(&edac_mce_lock);
- list_del(&edac_mce->list);
- mutex_unlock(&edac_mce_lock);
-}
-EXPORT_SYMBOL(edac_mce_unregister);
-
-int edac_mce_parse(struct mce *mce)
-{
- struct edac_mce *edac_mce;
-
- list_for_each_entry(edac_mce, &edac_mce_list, list) {
- if (edac_mce->check_error(edac_mce->priv, mce))
- return 1;
- }
-
- /* Nobody queued the error */
- return 0;
-}
-EXPORT_SYMBOL_GPL(edac_mce_parse);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
index a76fe83..6104dba 100644
--- a/drivers/edac/i7300_edac.c
+++ b/drivers/edac/i7300_edac.c
@@ -372,7 +372,7 @@
static void i7300_process_error_global(struct mem_ctl_info *mci)
{
struct i7300_pvt *pvt;
- u32 errnum, value;
+ u32 errnum, error_reg;
unsigned long errors;
const char *specific;
bool is_fatal;
@@ -381,9 +381,9 @@
/* read in the 1st FATAL error register */
pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_HI, &value);
- if (unlikely(value)) {
- errors = value;
+ FERR_GLOBAL_HI, &error_reg);
+ if (unlikely(error_reg)) {
+ errors = error_reg;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_global_hi_name));
specific = GET_ERR_FROM_TABLE(ferr_global_hi_name, errnum);
@@ -391,15 +391,15 @@
/* Clear the error bit */
pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_HI, value);
+ FERR_GLOBAL_HI, error_reg);
goto error_global;
}
pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_LO, &value);
- if (unlikely(value)) {
- errors = value;
+ FERR_GLOBAL_LO, &error_reg);
+ if (unlikely(error_reg)) {
+ errors = error_reg;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_global_lo_name));
specific = GET_ERR_FROM_TABLE(ferr_global_lo_name, errnum);
@@ -407,7 +407,7 @@
/* Clear the error bit */
pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_LO, value);
+ FERR_GLOBAL_LO, error_reg);
goto error_global;
}
@@ -427,7 +427,7 @@
static void i7300_process_fbd_error(struct mem_ctl_info *mci)
{
struct i7300_pvt *pvt;
- u32 errnum, value;
+ u32 errnum, value, error_reg;
u16 val16;
unsigned branch, channel, bank, rank, cas, ras;
u32 syndrome;
@@ -440,14 +440,14 @@
/* read in the 1st FATAL error register */
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
- FERR_FAT_FBD, &value);
- if (unlikely(value & FERR_FAT_FBD_ERR_MASK)) {
- errors = value & FERR_FAT_FBD_ERR_MASK ;
+ FERR_FAT_FBD, &error_reg);
+ if (unlikely(error_reg & FERR_FAT_FBD_ERR_MASK)) {
+ errors = error_reg & FERR_FAT_FBD_ERR_MASK ;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_fat_fbd_name));
specific = GET_ERR_FROM_TABLE(ferr_fat_fbd_name, errnum);
+ branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
- branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
NRECMEMA, &val16);
bank = NRECMEMA_BANK(val16);
@@ -455,11 +455,14 @@
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
NRECMEMB, &value);
-
is_wr = NRECMEMB_IS_WR(value);
cas = NRECMEMB_CAS(value);
ras = NRECMEMB_RAS(value);
+ /* Clean the error register */
+ pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+ FERR_FAT_FBD, error_reg);
+
snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
"FATAL (Branch=%d DRAM-Bank=%d %s "
"RAS=%d CAS=%d Err=0x%lx (%s))",
@@ -476,21 +479,17 @@
/* read in the 1st NON-FATAL error register */
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
- FERR_NF_FBD, &value);
- if (unlikely(value & FERR_NF_FBD_ERR_MASK)) {
- errors = value & FERR_NF_FBD_ERR_MASK;
+ FERR_NF_FBD, &error_reg);
+ if (unlikely(error_reg & FERR_NF_FBD_ERR_MASK)) {
+ errors = error_reg & FERR_NF_FBD_ERR_MASK;
errnum = find_first_bit(&errors,
ARRAY_SIZE(ferr_nf_fbd_name));
specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
-
- /* Clear the error bit */
- pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
- FERR_GLOBAL_LO, value);
+ branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
REDMEMA, &syndrome);
- branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
RECMEMA, &val16);
bank = RECMEMA_BANK(val16);
@@ -498,18 +497,20 @@
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
RECMEMB, &value);
-
is_wr = RECMEMB_IS_WR(value);
cas = RECMEMB_CAS(value);
ras = RECMEMB_RAS(value);
pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
REDMEMB, &value);
-
channel = (branch << 1);
if (IS_SECOND_CH(value))
channel++;
+ /* Clear the error bit */
+ pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+ FERR_NF_FBD, error_reg);
+
/* Form out message */
snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
"Corrected error (Branch=%d, Channel %d), "
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index f6cf448..70ad892 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -31,11 +31,13 @@
#include <linux/pci_ids.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/edac.h>
#include <linux/mmzone.h>
-#include <linux/edac_mce.h>
#include <linux/smp.h>
+#include <asm/mce.h>
#include <asm/processor.h>
+#include <asm/div64.h>
#include "edac_core.h"
@@ -78,6 +80,8 @@
/* OFFSETS for Device 0 Function 0 */
#define MC_CFG_CONTROL 0x90
+ #define MC_CFG_UNLOCK 0x02
+ #define MC_CFG_LOCK 0x00
/* OFFSETS for Device 3 Function 0 */
@@ -98,6 +102,15 @@
#define DIMM0_COR_ERR(r) ((r) & 0x7fff)
/* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_SSRCONTROL 0x48
+ #define SSR_MODE_DISABLE 0x00
+ #define SSR_MODE_ENABLE 0x01
+ #define SSR_MODE_MASK 0x03
+
+#define MC_SCRUB_CONTROL 0x4c
+ #define STARTSCRUB (1 << 24)
+ #define SCRUBINTERVAL_MASK 0xffffff
+
#define MC_COR_ECC_CNT_0 0x80
#define MC_COR_ECC_CNT_1 0x84
#define MC_COR_ECC_CNT_2 0x88
@@ -253,10 +266,7 @@
unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
- unsigned int is_registered;
-
- /* mcelog glue */
- struct edac_mce edac_mce;
+ bool is_registered, enable_scrub;
/* Fifo double buffers */
struct mce mce_entry[MCE_LOG_LEN];
@@ -268,6 +278,9 @@
/* Count indicator to show errors not got */
unsigned mce_overrun;
+ /* DCLK Frequency used for computing scrub rate */
+ int dclk_freq;
+
/* Struct to control EDAC polling */
struct edac_pci_ctl_info *i7core_pci;
};
@@ -281,8 +294,7 @@
/* Memory controller */
{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
-
- /* Exists only for RDIMM */
+ /* Exists only for RDIMM */
{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
@@ -303,6 +315,16 @@
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
+
+ /* Generic Non-core registers */
+ /*
+ * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+ * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+ * the probing code needs to test for the other address in case of
+ * failure of this one
+ */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
+
};
static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
@@ -319,6 +341,12 @@
{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
+
+ /*
+ * This is the PCI device has an alternate address on some
+ * processors like Core i7 860
+ */
+ { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
};
static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
@@ -346,6 +374,10 @@
{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
+
+ /* Generic Non-core registers */
+ { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
+
};
#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
@@ -714,6 +746,10 @@
csr->edac_mode = mode;
csr->mtype = mtype;
+ snprintf(csr->channels[0].label,
+ sizeof(csr->channels[0].label),
+ "CPU#%uChannel#%u_DIMM#%u",
+ pvt->i7core_dev->socket, i, j);
csrow++;
}
@@ -731,7 +767,7 @@
debugf1("\t\t%#x\t%#x\t%#x\n",
(value[j] >> 27) & 0x1,
(value[j] >> 24) & 0x7,
- (value[j] && ((1 << 24) - 1)));
+ (value[j] & ((1 << 24) - 1)));
}
return 0;
@@ -1324,6 +1360,20 @@
pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
dev_descr->dev_id, *prev);
+ /*
+ * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+ * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+ * to probe for the alternate address in case of failure
+ */
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+ if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+ *prev);
+
if (!pdev) {
if (*prev) {
*prev = pdev;
@@ -1444,8 +1494,10 @@
struct i7core_pvt *pvt = mci->pvt_info;
struct pci_dev *pdev;
int i, func, slot;
+ char *family;
- pvt->is_registered = 0;
+ pvt->is_registered = false;
+ pvt->enable_scrub = false;
for (i = 0; i < i7core_dev->n_devs; i++) {
pdev = i7core_dev->pdev[i];
if (!pdev)
@@ -1461,9 +1513,37 @@
if (unlikely(func > MAX_CHAN_FUNC))
goto error;
pvt->pci_ch[slot - 4][func] = pdev;
- } else if (!slot && !func)
+ } else if (!slot && !func) {
pvt->pci_noncore = pdev;
- else
+
+ /* Detect the processor family */
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_I7_NONCORE:
+ family = "Xeon 35xx/ i7core";
+ pvt->enable_scrub = false;
+ break;
+ case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT:
+ family = "i7-800/i5-700";
+ pvt->enable_scrub = false;
+ break;
+ case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE:
+ family = "Xeon 34xx";
+ pvt->enable_scrub = false;
+ break;
+ case PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT:
+ family = "Xeon 55xx";
+ pvt->enable_scrub = true;
+ break;
+ case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2:
+ family = "Xeon 56xx / i7-900";
+ pvt->enable_scrub = true;
+ break;
+ default:
+ family = "unknown";
+ pvt->enable_scrub = false;
+ }
+ debugf0("Detected a processor type %s\n", family);
+ } else
goto error;
debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
@@ -1472,7 +1552,7 @@
if (PCI_SLOT(pdev->devfn) == 3 &&
PCI_FUNC(pdev->devfn) == 2)
- pvt->is_registered = 1;
+ pvt->is_registered = true;
}
return 0;
@@ -1826,33 +1906,43 @@
* WARNING: As this routine should be called at NMI time, extra care should
* be taken to avoid deadlocks, and to be as fast as possible.
*/
-static int i7core_mce_check_error(void *priv, struct mce *mce)
+static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
+ void *data)
{
- struct mem_ctl_info *mci = priv;
- struct i7core_pvt *pvt = mci->pvt_info;
+ struct mce *mce = (struct mce *)data;
+ struct i7core_dev *i7_dev;
+ struct mem_ctl_info *mci;
+ struct i7core_pvt *pvt;
+
+ i7_dev = get_i7core_dev(mce->socketid);
+ if (!i7_dev)
+ return NOTIFY_BAD;
+
+ mci = i7_dev->mci;
+ pvt = mci->pvt_info;
/*
* Just let mcelog handle it if the error is
* outside the memory controller
*/
if (((mce->status & 0xffff) >> 7) != 1)
- return 0;
+ return NOTIFY_DONE;
/* Bank 8 registers are the only ones that we know how to handle */
if (mce->bank != 8)
- return 0;
+ return NOTIFY_DONE;
#ifdef CONFIG_SMP
/* Only handle if it is the right mc controller */
- if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
- return 0;
+ if (mce->socketid != pvt->i7core_dev->socket)
+ return NOTIFY_DONE;
#endif
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
pvt->mce_overrun++;
- return 0;
+ return NOTIFY_DONE;
}
/* Copy memory error at the ringbuffer */
@@ -1865,7 +1955,240 @@
i7core_check_error(mci);
/* Advise mcelog that the errors were handled */
- return 1;
+ return NOTIFY_STOP;
+}
+
+static struct notifier_block i7_mce_dec = {
+ .notifier_call = i7core_mce_check_error,
+};
+
+struct memdev_dmi_entry {
+ u8 type;
+ u8 length;
+ u16 handle;
+ u16 phys_mem_array_handle;
+ u16 mem_err_info_handle;
+ u16 total_width;
+ u16 data_width;
+ u16 size;
+ u8 form;
+ u8 device_set;
+ u8 device_locator;
+ u8 bank_locator;
+ u8 memory_type;
+ u16 type_detail;
+ u16 speed;
+ u8 manufacturer;
+ u8 serial_number;
+ u8 asset_tag;
+ u8 part_number;
+ u8 attributes;
+ u32 extended_size;
+ u16 conf_mem_clk_speed;
+} __attribute__((__packed__));
+
+
+/*
+ * Decode the DRAM Clock Frequency, be paranoid, make sure that all
+ * memory devices show the same speed, and if they don't then consider
+ * all speeds to be invalid.
+ */
+static void decode_dclk(const struct dmi_header *dh, void *_dclk_freq)
+{
+ int *dclk_freq = _dclk_freq;
+ u16 dmi_mem_clk_speed;
+
+ if (*dclk_freq == -1)
+ return;
+
+ if (dh->type == DMI_ENTRY_MEM_DEVICE) {
+ struct memdev_dmi_entry *memdev_dmi_entry =
+ (struct memdev_dmi_entry *)dh;
+ unsigned long conf_mem_clk_speed_offset =
+ (unsigned long)&memdev_dmi_entry->conf_mem_clk_speed -
+ (unsigned long)&memdev_dmi_entry->type;
+ unsigned long speed_offset =
+ (unsigned long)&memdev_dmi_entry->speed -
+ (unsigned long)&memdev_dmi_entry->type;
+
+ /* Check that a DIMM is present */
+ if (memdev_dmi_entry->size == 0)
+ return;
+
+ /*
+ * Pick the configured speed if it's available, otherwise
+ * pick the DIMM speed, or we don't have a speed.
+ */
+ if (memdev_dmi_entry->length > conf_mem_clk_speed_offset) {
+ dmi_mem_clk_speed =
+ memdev_dmi_entry->conf_mem_clk_speed;
+ } else if (memdev_dmi_entry->length > speed_offset) {
+ dmi_mem_clk_speed = memdev_dmi_entry->speed;
+ } else {
+ *dclk_freq = -1;
+ return;
+ }
+
+ if (*dclk_freq == 0) {
+ /* First pass, speed was 0 */
+ if (dmi_mem_clk_speed > 0) {
+ /* Set speed if a valid speed is read */
+ *dclk_freq = dmi_mem_clk_speed;
+ } else {
+ /* Otherwise we don't have a valid speed */
+ *dclk_freq = -1;
+ }
+ } else if (*dclk_freq > 0 &&
+ *dclk_freq != dmi_mem_clk_speed) {
+ /*
+ * If we have a speed, check that all DIMMS are the same
+ * speed, otherwise set the speed as invalid.
+ */
+ *dclk_freq = -1;
+ }
+ }
+}
+
+/*
+ * The default DCLK frequency is used as a fallback if we
+ * fail to find anything reliable in the DMI. The value
+ * is taken straight from the datasheet.
+ */
+#define DEFAULT_DCLK_FREQ 800
+
+static int get_dclk_freq(void)
+{
+ int dclk_freq = 0;
+
+ dmi_walk(decode_dclk, (void *)&dclk_freq);
+
+ if (dclk_freq < 1)
+ return DEFAULT_DCLK_FREQ;
+
+ return dclk_freq;
+}
+
+/*
+ * set_sdram_scrub_rate This routine sets byte/sec bandwidth scrub rate
+ * to hardware according to SCRUBINTERVAL formula
+ * found in datasheet.
+ */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ u32 dw_scrub;
+ u32 dw_ssr;
+
+ /* Get data from the MC register, function 2 */
+ pdev = pvt->pci_mcr[2];
+ if (!pdev)
+ return -ENODEV;
+
+ pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub);
+
+ if (new_bw == 0) {
+ /* Prepare to disable petrol scrub */
+ dw_scrub &= ~STARTSCRUB;
+ /* Stop the patrol scrub engine */
+ write_and_test(pdev, MC_SCRUB_CONTROL,
+ dw_scrub & ~SCRUBINTERVAL_MASK);
+
+ /* Get current status of scrub rate and set bit to disable */
+ pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+ dw_ssr &= ~SSR_MODE_MASK;
+ dw_ssr |= SSR_MODE_DISABLE;
+ } else {
+ const int cache_line_size = 64;
+ const u32 freq_dclk_mhz = pvt->dclk_freq;
+ unsigned long long scrub_interval;
+ /*
+ * Translate the desired scrub rate to a register value and
+ * program the corresponding register value.
+ */
+ scrub_interval = (unsigned long long)freq_dclk_mhz *
+ cache_line_size * 1000000;
+ do_div(scrub_interval, new_bw);
+
+ if (!scrub_interval || scrub_interval > SCRUBINTERVAL_MASK)
+ return -EINVAL;
+
+ dw_scrub = SCRUBINTERVAL_MASK & scrub_interval;
+
+ /* Start the patrol scrub engine */
+ pci_write_config_dword(pdev, MC_SCRUB_CONTROL,
+ STARTSCRUB | dw_scrub);
+
+ /* Get current status of scrub rate and set bit to enable */
+ pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+ dw_ssr &= ~SSR_MODE_MASK;
+ dw_ssr |= SSR_MODE_ENABLE;
+ }
+ /* Disable or enable scrubbing */
+ pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr);
+
+ return new_bw;
+}
+
+/*
+ * get_sdram_scrub_rate This routine convert current scrub rate value
+ * into byte/sec bandwidth accourding to
+ * SCRUBINTERVAL formula found in datasheet.
+ */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ const u32 cache_line_size = 64;
+ const u32 freq_dclk_mhz = pvt->dclk_freq;
+ unsigned long long scrub_rate;
+ u32 scrubval;
+
+ /* Get data from the MC register, function 2 */
+ pdev = pvt->pci_mcr[2];
+ if (!pdev)
+ return -ENODEV;
+
+ /* Get current scrub control data */
+ pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval);
+
+ /* Mask highest 8-bits to 0 */
+ scrubval &= SCRUBINTERVAL_MASK;
+ if (!scrubval)
+ return 0;
+
+ /* Calculate scrub rate value into byte/sec bandwidth */
+ scrub_rate = (unsigned long long)freq_dclk_mhz *
+ 1000000 * cache_line_size;
+ do_div(scrub_rate, scrubval);
+ return (int)scrub_rate;
+}
+
+static void enable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 pci_lock;
+
+ /* Unlock writes to pci registers */
+ pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+ pci_lock &= ~0x3;
+ pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+ pci_lock | MC_CFG_UNLOCK);
+
+ mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+ mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
+}
+
+static void disable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+ struct i7core_pvt *pvt = mci->pvt_info;
+ u32 pci_lock;
+
+ /* Lock writes to pci registers */
+ pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+ pci_lock &= ~0x3;
+ pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+ pci_lock | MC_CFG_LOCK);
}
static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
@@ -1874,7 +2197,8 @@
&pvt->i7core_dev->pdev[0]->dev,
EDAC_MOD_STR);
if (unlikely(!pvt->i7core_pci))
- pr_warn("Unable to setup PCI error report via EDAC\n");
+ i7core_printk(KERN_WARNING,
+ "Unable to setup PCI error report via EDAC\n");
}
static void i7core_pci_ctl_release(struct i7core_pvt *pvt)
@@ -1906,8 +2230,11 @@
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &i7core_dev->pdev[0]->dev);
- /* Disable MCE NMI handler */
- edac_mce_unregister(&pvt->edac_mce);
+ /* Disable scrubrate setting */
+ if (pvt->enable_scrub)
+ disable_sdram_scrub_setting(mci);
+
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &i7_mce_dec);
/* Disable EDAC polling */
i7core_pci_ctl_release(pvt);
@@ -1979,6 +2306,10 @@
/* Set the function pointer to an actual operation function */
mci->edac_check = i7core_check_error;
+ /* Enable scrubrate setting */
+ if (pvt->enable_scrub)
+ enable_sdram_scrub_setting(mci);
+
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
debugf0("MC: " __FILE__
@@ -2002,21 +2333,13 @@
/* allocating generic PCI control info */
i7core_pci_ctl_create(pvt);
- /* Registers on edac_mce in order to receive memory errors */
- pvt->edac_mce.priv = mci;
- pvt->edac_mce.check_error = i7core_mce_check_error;
- rc = edac_mce_register(&pvt->edac_mce);
- if (unlikely(rc < 0)) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mce_register()\n", __func__);
- goto fail1;
- }
+ /* DCLK for scrub rate setting */
+ pvt->dclk_freq = get_dclk_freq();
+
+ atomic_notifier_chain_register(&x86_mce_decoder_chain, &i7_mce_dec);
return 0;
-fail1:
- i7core_pci_ctl_release(pvt);
- edac_mc_del_mc(mci->dev);
fail0:
kfree(mci->ctl_name);
edac_mc_free(mci);
@@ -2035,7 +2358,7 @@
static int __devinit i7core_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- int rc;
+ int rc, count = 0;
struct i7core_dev *i7core_dev;
/* get the pci devices we want to reserve for our use */
@@ -2055,12 +2378,28 @@
goto fail0;
list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+ count++;
rc = i7core_register_mci(i7core_dev);
if (unlikely(rc < 0))
goto fail1;
}
- i7core_printk(KERN_INFO, "Driver loaded.\n");
+ /*
+ * Nehalem-EX uses a different memory controller. However, as the
+ * memory controller is not visible on some Nehalem/Nehalem-EP, we
+ * need to indirectly probe via a X58 PCI device. The same devices
+ * are found on (some) Nehalem-EX. So, on those machines, the
+ * probe routine needs to return -ENODEV, as the actual Memory
+ * Controller registers won't be detected.
+ */
+ if (!count) {
+ rc = -ENODEV;
+ goto fail1;
+ }
+
+ i7core_printk(KERN_INFO,
+ "Driver loaded, %d memory controller(s) found.\n",
+ count);
mutex_unlock(&i7core_edac_lock);
return 0;
diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
new file mode 100644
index 0000000..7a402bf
--- /dev/null
+++ b/drivers/edac/sb_edac.c
@@ -0,0 +1,1893 @@
+/* Intel Sandy Bridge -EN/-EP/-EX Memory Controller kernel module
+ *
+ * This driver supports the memory controllers found on the Intel
+ * processor family Sandy Bridge.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2011 by:
+ * Mauro Carvalho Chehab <mchehab@redhat.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_core.h"
+
+/* Static vars */
+static LIST_HEAD(sbridge_edac_list);
+static DEFINE_MUTEX(sbridge_edac_lock);
+static int probed;
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define SBRIDGE_REVISION " Ver: 1.0.0 "
+#define EDAC_MOD_STR "sbridge_edac"
+
+/*
+ * Debug macros
+ */
+#define sbridge_printk(level, fmt, arg...) \
+ edac_printk(level, "sbridge", fmt, ##arg)
+
+#define sbridge_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "sbridge", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi) \
+ (((v) & ((1ULL << ((hi) - (lo) + 1)) - 1) << (lo)) >> (lo))
+
+/*
+ * sbridge Memory Controller Registers
+ */
+
+/*
+ * FIXME: For now, let's order by device function, as it makes
+ * easier for driver's development proccess. This table should be
+ * moved to pci_id.h when submitted upstream
+ */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0 0x3cf4 /* 12.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1 0x3cf6 /* 12.7 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_BR 0x3cf5 /* 13.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0 0x3ca0 /* 14.0 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA 0x3ca8 /* 15.0 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS 0x3c71 /* 15.1 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0 0x3caa /* 15.2 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1 0x3cab /* 15.3 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2 0x3cac /* 15.4 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3 0x3cad /* 15.5 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO 0x3cb8 /* 17.0 */
+
+ /*
+ * Currently, unused, but will be needed in the future
+ * implementations, as they hold the error counters
+ */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR0 0x3c72 /* 16.2 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR1 0x3c73 /* 16.3 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR2 0x3c76 /* 16.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR3 0x3c77 /* 16.7 */
+
+/* Devices 12 Function 6, Offsets 0x80 to 0xcc */
+static const u32 dram_rule[] = {
+ 0x80, 0x88, 0x90, 0x98, 0xa0,
+ 0xa8, 0xb0, 0xb8, 0xc0, 0xc8,
+};
+#define MAX_SAD ARRAY_SIZE(dram_rule)
+
+#define SAD_LIMIT(reg) ((GET_BITFIELD(reg, 6, 25) << 26) | 0x3ffffff)
+#define DRAM_ATTR(reg) GET_BITFIELD(reg, 2, 3)
+#define INTERLEAVE_MODE(reg) GET_BITFIELD(reg, 1, 1)
+#define DRAM_RULE_ENABLE(reg) GET_BITFIELD(reg, 0, 0)
+
+static char *get_dram_attr(u32 reg)
+{
+ switch(DRAM_ATTR(reg)) {
+ case 0:
+ return "DRAM";
+ case 1:
+ return "MMCFG";
+ case 2:
+ return "NXM";
+ default:
+ return "unknown";
+ }
+}
+
+static const u32 interleave_list[] = {
+ 0x84, 0x8c, 0x94, 0x9c, 0xa4,
+ 0xac, 0xb4, 0xbc, 0xc4, 0xcc,
+};
+#define MAX_INTERLEAVE ARRAY_SIZE(interleave_list)
+
+#define SAD_PKG0(reg) GET_BITFIELD(reg, 0, 2)
+#define SAD_PKG1(reg) GET_BITFIELD(reg, 3, 5)
+#define SAD_PKG2(reg) GET_BITFIELD(reg, 8, 10)
+#define SAD_PKG3(reg) GET_BITFIELD(reg, 11, 13)
+#define SAD_PKG4(reg) GET_BITFIELD(reg, 16, 18)
+#define SAD_PKG5(reg) GET_BITFIELD(reg, 19, 21)
+#define SAD_PKG6(reg) GET_BITFIELD(reg, 24, 26)
+#define SAD_PKG7(reg) GET_BITFIELD(reg, 27, 29)
+
+static inline int sad_pkg(u32 reg, int interleave)
+{
+ switch (interleave) {
+ case 0:
+ return SAD_PKG0(reg);
+ case 1:
+ return SAD_PKG1(reg);
+ case 2:
+ return SAD_PKG2(reg);
+ case 3:
+ return SAD_PKG3(reg);
+ case 4:
+ return SAD_PKG4(reg);
+ case 5:
+ return SAD_PKG5(reg);
+ case 6:
+ return SAD_PKG6(reg);
+ case 7:
+ return SAD_PKG7(reg);
+ default:
+ return -EINVAL;
+ }
+}
+
+/* Devices 12 Function 7 */
+
+#define TOLM 0x80
+#define TOHM 0x84
+
+#define GET_TOLM(reg) ((GET_BITFIELD(reg, 0, 3) << 28) | 0x3ffffff)
+#define GET_TOHM(reg) ((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff)
+
+/* Device 13 Function 6 */
+
+#define SAD_TARGET 0xf0
+
+#define SOURCE_ID(reg) GET_BITFIELD(reg, 9, 11)
+
+#define SAD_CONTROL 0xf4
+
+#define NODE_ID(reg) GET_BITFIELD(reg, 0, 2)
+
+/* Device 14 function 0 */
+
+static const u32 tad_dram_rule[] = {
+ 0x40, 0x44, 0x48, 0x4c,
+ 0x50, 0x54, 0x58, 0x5c,
+ 0x60, 0x64, 0x68, 0x6c,
+};
+#define MAX_TAD ARRAY_SIZE(tad_dram_rule)
+
+#define TAD_LIMIT(reg) ((GET_BITFIELD(reg, 12, 31) << 26) | 0x3ffffff)
+#define TAD_SOCK(reg) GET_BITFIELD(reg, 10, 11)
+#define TAD_CH(reg) GET_BITFIELD(reg, 8, 9)
+#define TAD_TGT3(reg) GET_BITFIELD(reg, 6, 7)
+#define TAD_TGT2(reg) GET_BITFIELD(reg, 4, 5)
+#define TAD_TGT1(reg) GET_BITFIELD(reg, 2, 3)
+#define TAD_TGT0(reg) GET_BITFIELD(reg, 0, 1)
+
+/* Device 15, function 0 */
+
+#define MCMTR 0x7c
+
+#define IS_ECC_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 2, 2)
+#define IS_LOCKSTEP_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 1, 1)
+#define IS_CLOSE_PG(mcmtr) GET_BITFIELD(mcmtr, 0, 0)
+
+/* Device 15, function 1 */
+
+#define RASENABLES 0xac
+#define IS_MIRROR_ENABLED(reg) GET_BITFIELD(reg, 0, 0)
+
+/* Device 15, functions 2-5 */
+
+static const int mtr_regs[] = {
+ 0x80, 0x84, 0x88,
+};
+
+#define RANK_DISABLE(mtr) GET_BITFIELD(mtr, 16, 19)
+#define IS_DIMM_PRESENT(mtr) GET_BITFIELD(mtr, 14, 14)
+#define RANK_CNT_BITS(mtr) GET_BITFIELD(mtr, 12, 13)
+#define RANK_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 2, 4)
+#define COL_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 0, 1)
+
+static const u32 tad_ch_nilv_offset[] = {
+ 0x90, 0x94, 0x98, 0x9c,
+ 0xa0, 0xa4, 0xa8, 0xac,
+ 0xb0, 0xb4, 0xb8, 0xbc,
+};
+#define CHN_IDX_OFFSET(reg) GET_BITFIELD(reg, 28, 29)
+#define TAD_OFFSET(reg) (GET_BITFIELD(reg, 6, 25) << 26)
+
+static const u32 rir_way_limit[] = {
+ 0x108, 0x10c, 0x110, 0x114, 0x118,
+};
+#define MAX_RIR_RANGES ARRAY_SIZE(rir_way_limit)
+
+#define IS_RIR_VALID(reg) GET_BITFIELD(reg, 31, 31)
+#define RIR_WAY(reg) GET_BITFIELD(reg, 28, 29)
+#define RIR_LIMIT(reg) ((GET_BITFIELD(reg, 1, 10) << 29)| 0x1fffffff)
+
+#define MAX_RIR_WAY 8
+
+static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = {
+ { 0x120, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c },
+ { 0x140, 0x144, 0x148, 0x14c, 0x150, 0x154, 0x158, 0x15c },
+ { 0x160, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c },
+ { 0x180, 0x184, 0x188, 0x18c, 0x190, 0x194, 0x198, 0x19c },
+ { 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc },
+};
+
+#define RIR_RNK_TGT(reg) GET_BITFIELD(reg, 16, 19)
+#define RIR_OFFSET(reg) GET_BITFIELD(reg, 2, 14)
+
+/* Device 16, functions 2-7 */
+
+/*
+ * FIXME: Implement the error count reads directly
+ */
+
+static const u32 correrrcnt[] = {
+ 0x104, 0x108, 0x10c, 0x110,
+};
+
+#define RANK_ODD_OV(reg) GET_BITFIELD(reg, 31, 31)
+#define RANK_ODD_ERR_CNT(reg) GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_OV(reg) GET_BITFIELD(reg, 15, 15)
+#define RANK_EVEN_ERR_CNT(reg) GET_BITFIELD(reg, 0, 14)
+
+static const u32 correrrthrsld[] = {
+ 0x11c, 0x120, 0x124, 0x128,
+};
+
+#define RANK_ODD_ERR_THRSLD(reg) GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_ERR_THRSLD(reg) GET_BITFIELD(reg, 0, 14)
+
+
+/* Device 17, function 0 */
+
+#define RANK_CFG_A 0x0328
+
+#define IS_RDIMM_ENABLED(reg) GET_BITFIELD(reg, 11, 11)
+
+/*
+ * sbridge structs
+ */
+
+#define NUM_CHANNELS 4
+#define MAX_DIMMS 3 /* Max DIMMS per channel */
+
+struct sbridge_info {
+ u32 mcmtr;
+};
+
+struct sbridge_channel {
+ u32 ranks;
+ u32 dimms;
+};
+
+struct pci_id_descr {
+ int dev;
+ int func;
+ int dev_id;
+ int optional;
+};
+
+struct pci_id_table {
+ const struct pci_id_descr *descr;
+ int n_devs;
+};
+
+struct sbridge_dev {
+ struct list_head list;
+ u8 bus, mc;
+ u8 node_id, source_id;
+ struct pci_dev **pdev;
+ int n_devs;
+ struct mem_ctl_info *mci;
+};
+
+struct sbridge_pvt {
+ struct pci_dev *pci_ta, *pci_ddrio, *pci_ras;
+ struct pci_dev *pci_sad0, *pci_sad1, *pci_ha0;
+ struct pci_dev *pci_br;
+ struct pci_dev *pci_tad[NUM_CHANNELS];
+
+ struct sbridge_dev *sbridge_dev;
+
+ struct sbridge_info info;
+ struct sbridge_channel channel[NUM_CHANNELS];
+
+ int csrow_map[NUM_CHANNELS][MAX_DIMMS];
+
+ /* Memory type detection */
+ bool is_mirrored, is_lockstep, is_close_pg;
+
+ /* Fifo double buffers */
+ struct mce mce_entry[MCE_LOG_LEN];
+ struct mce mce_outentry[MCE_LOG_LEN];
+
+ /* Fifo in/out counters */
+ unsigned mce_in, mce_out;
+
+ /* Count indicator to show errors not got */
+ unsigned mce_overrun;
+
+ /* Memory description */
+ u64 tolm, tohm;
+};
+
+#define PCI_DESCR(device, function, device_id) \
+ .dev = (device), \
+ .func = (function), \
+ .dev_id = (device_id)
+
+static const struct pci_id_descr pci_dev_descr_sbridge[] = {
+ /* Processor Home Agent */
+ { PCI_DESCR(14, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0) },
+
+ /* Memory controller */
+ { PCI_DESCR(15, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA) },
+ { PCI_DESCR(15, 1, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS) },
+ { PCI_DESCR(15, 2, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0) },
+ { PCI_DESCR(15, 3, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1) },
+ { PCI_DESCR(15, 4, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2) },
+ { PCI_DESCR(15, 5, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3) },
+ { PCI_DESCR(17, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO) },
+
+ /* System Address Decoder */
+ { PCI_DESCR(12, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0) },
+ { PCI_DESCR(12, 7, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1) },
+
+ /* Broadcast Registers */
+ { PCI_DESCR(13, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_BR) },
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
+static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge),
+ {0,} /* 0 terminated list. */
+};
+
+/*
+ * pci_device_id table for which devices we are looking for
+ */
+static const struct pci_device_id sbridge_pci_tbl[] __devinitdata = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA)},
+ {0,} /* 0 terminated list. */
+};
+
+
+/****************************************************************************
+ Anciliary status routines
+ ****************************************************************************/
+
+static inline int numrank(u32 mtr)
+{
+ int ranks = (1 << RANK_CNT_BITS(mtr));
+
+ if (ranks > 4) {
+ debugf0("Invalid number of ranks: %d (max = 4) raw value = %x (%04x)",
+ ranks, (unsigned int)RANK_CNT_BITS(mtr), mtr);
+ return -EINVAL;
+ }
+
+ return ranks;
+}
+
+static inline int numrow(u32 mtr)
+{
+ int rows = (RANK_WIDTH_BITS(mtr) + 12);
+
+ if (rows < 13 || rows > 18) {
+ debugf0("Invalid number of rows: %d (should be between 14 and 17) raw value = %x (%04x)",
+ rows, (unsigned int)RANK_WIDTH_BITS(mtr), mtr);
+ return -EINVAL;
+ }
+
+ return 1 << rows;
+}
+
+static inline int numcol(u32 mtr)
+{
+ int cols = (COL_WIDTH_BITS(mtr) + 10);
+
+ if (cols > 12) {
+ debugf0("Invalid number of cols: %d (max = 4) raw value = %x (%04x)",
+ cols, (unsigned int)COL_WIDTH_BITS(mtr), mtr);
+ return -EINVAL;
+ }
+
+ return 1 << cols;
+}
+
+static struct sbridge_dev *get_sbridge_dev(u8 bus)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+ if (sbridge_dev->bus == bus)
+ return sbridge_dev;
+ }
+
+ return NULL;
+}
+
+static struct sbridge_dev *alloc_sbridge_dev(u8 bus,
+ const struct pci_id_table *table)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ sbridge_dev = kzalloc(sizeof(*sbridge_dev), GFP_KERNEL);
+ if (!sbridge_dev)
+ return NULL;
+
+ sbridge_dev->pdev = kzalloc(sizeof(*sbridge_dev->pdev) * table->n_devs,
+ GFP_KERNEL);
+ if (!sbridge_dev->pdev) {
+ kfree(sbridge_dev);
+ return NULL;
+ }
+
+ sbridge_dev->bus = bus;
+ sbridge_dev->n_devs = table->n_devs;
+ list_add_tail(&sbridge_dev->list, &sbridge_edac_list);
+
+ return sbridge_dev;
+}
+
+static void free_sbridge_dev(struct sbridge_dev *sbridge_dev)
+{
+ list_del(&sbridge_dev->list);
+ kfree(sbridge_dev->pdev);
+ kfree(sbridge_dev);
+}
+
+/****************************************************************************
+ Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 bus, unsigned slot,
+ unsigned func)
+{
+ struct sbridge_dev *sbridge_dev = get_sbridge_dev(bus);
+ int i;
+
+ if (!sbridge_dev)
+ return NULL;
+
+ for (i = 0; i < sbridge_dev->n_devs; i++) {
+ if (!sbridge_dev->pdev[i])
+ continue;
+
+ if (PCI_SLOT(sbridge_dev->pdev[i]->devfn) == slot &&
+ PCI_FUNC(sbridge_dev->pdev[i]->devfn) == func) {
+ debugf1("Associated %02x.%02x.%d with %p\n",
+ bus, slot, func, sbridge_dev->pdev[i]);
+ return sbridge_dev->pdev[i];
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * sbridge_get_active_channels() - gets the number of channels and csrows
+ * bus: Device bus
+ * @channels: Number of channels that will be returned
+ * @csrows: Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket, identified
+ * by the associated PCI bus.
+ * this is used in order to properly allocate the size of mci components.
+ * Note: one csrow is one dimm.
+ */
+static int sbridge_get_active_channels(const u8 bus, unsigned *channels,
+ unsigned *csrows)
+{
+ struct pci_dev *pdev = NULL;
+ int i, j;
+ u32 mcmtr;
+
+ *channels = 0;
+ *csrows = 0;
+
+ pdev = get_pdev_slot_func(bus, 15, 0);
+ if (!pdev) {
+ sbridge_printk(KERN_ERR, "Couldn't find PCI device "
+ "%2x.%02d.%d!!!\n",
+ bus, 15, 0);
+ return -ENODEV;
+ }
+
+ pci_read_config_dword(pdev, MCMTR, &mcmtr);
+ if (!IS_ECC_ENABLED(mcmtr)) {
+ sbridge_printk(KERN_ERR, "ECC is disabled. Aborting\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ u32 mtr;
+
+ /* Device 15 functions 2 - 5 */
+ pdev = get_pdev_slot_func(bus, 15, 2 + i);
+ if (!pdev) {
+ sbridge_printk(KERN_ERR, "Couldn't find PCI device "
+ "%2x.%02d.%d!!!\n",
+ bus, 15, 2 + i);
+ return -ENODEV;
+ }
+ (*channels)++;
+
+ for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
+ pci_read_config_dword(pdev, mtr_regs[j], &mtr);
+ debugf1("Bus#%02x channel #%d MTR%d = %x\n", bus, i, j, mtr);
+ if (IS_DIMM_PRESENT(mtr))
+ (*csrows)++;
+ }
+ }
+
+ debugf0("Number of active channels: %d, number of active dimms: %d\n",
+ *channels, *csrows);
+
+ return 0;
+}
+
+static int get_dimm_config(const struct mem_ctl_info *mci)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ struct csrow_info *csr;
+ int i, j, banks, ranks, rows, cols, size, npages;
+ int csrow = 0;
+ unsigned long last_page = 0;
+ u32 reg;
+ enum edac_type mode;
+ enum mem_type mtype;
+
+ pci_read_config_dword(pvt->pci_br, SAD_TARGET, ®);
+ pvt->sbridge_dev->source_id = SOURCE_ID(reg);
+
+ pci_read_config_dword(pvt->pci_br, SAD_CONTROL, ®);
+ pvt->sbridge_dev->node_id = NODE_ID(reg);
+ debugf0("mc#%d: Node ID: %d, source ID: %d\n",
+ pvt->sbridge_dev->mc,
+ pvt->sbridge_dev->node_id,
+ pvt->sbridge_dev->source_id);
+
+ pci_read_config_dword(pvt->pci_ras, RASENABLES, ®);
+ if (IS_MIRROR_ENABLED(reg)) {
+ debugf0("Memory mirror is enabled\n");
+ pvt->is_mirrored = true;
+ } else {
+ debugf0("Memory mirror is disabled\n");
+ pvt->is_mirrored = false;
+ }
+
+ pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr);
+ if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) {
+ debugf0("Lockstep is enabled\n");
+ mode = EDAC_S8ECD8ED;
+ pvt->is_lockstep = true;
+ } else {
+ debugf0("Lockstep is disabled\n");
+ mode = EDAC_S4ECD4ED;
+ pvt->is_lockstep = false;
+ }
+ if (IS_CLOSE_PG(pvt->info.mcmtr)) {
+ debugf0("address map is on closed page mode\n");
+ pvt->is_close_pg = true;
+ } else {
+ debugf0("address map is on open page mode\n");
+ pvt->is_close_pg = false;
+ }
+
+ pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®);
+ if (IS_RDIMM_ENABLED(reg)) {
+ /* FIXME: Can also be LRDIMM */
+ debugf0("Memory is registered\n");
+ mtype = MEM_RDDR3;
+ } else {
+ debugf0("Memory is unregistered\n");
+ mtype = MEM_DDR3;
+ }
+
+ /* On all supported DDR3 DIMM types, there are 8 banks available */
+ banks = 8;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ u32 mtr;
+
+ for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ mtr_regs[j], &mtr);
+ debugf4("Channel #%d MTR%d = %x\n", i, j, mtr);
+ if (IS_DIMM_PRESENT(mtr)) {
+ pvt->channel[i].dimms++;
+
+ ranks = numrank(mtr);
+ rows = numrow(mtr);
+ cols = numcol(mtr);
+
+ /* DDR3 has 8 I/O banks */
+ size = (rows * cols * banks * ranks) >> (20 - 3);
+ npages = MiB_TO_PAGES(size);
+
+ debugf0("mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+ pvt->sbridge_dev->mc, i, j,
+ size, npages,
+ banks, ranks, rows, cols);
+ csr = &mci->csrows[csrow];
+
+ csr->first_page = last_page;
+ csr->last_page = last_page + npages - 1;
+ csr->page_mask = 0UL; /* Unused */
+ csr->nr_pages = npages;
+ csr->grain = 32;
+ csr->csrow_idx = csrow;
+ csr->dtype = (banks == 8) ? DEV_X8 : DEV_X4;
+ csr->ce_count = 0;
+ csr->ue_count = 0;
+ csr->mtype = mtype;
+ csr->edac_mode = mode;
+ csr->nr_channels = 1;
+ csr->channels[0].chan_idx = i;
+ csr->channels[0].ce_count = 0;
+ pvt->csrow_map[i][j] = csrow;
+ snprintf(csr->channels[0].label,
+ sizeof(csr->channels[0].label),
+ "CPU_SrcID#%u_Channel#%u_DIMM#%u",
+ pvt->sbridge_dev->source_id, i, j);
+ last_page += npages;
+ csrow++;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void get_memory_layout(const struct mem_ctl_info *mci)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ int i, j, k, n_sads, n_tads, sad_interl;
+ u32 reg;
+ u64 limit, prv = 0;
+ u64 tmp_mb;
+ u32 rir_way;
+
+ /*
+ * Step 1) Get TOLM/TOHM ranges
+ */
+
+ /* Address range is 32:28 */
+ pci_read_config_dword(pvt->pci_sad1, TOLM,
+ ®);
+ pvt->tolm = GET_TOLM(reg);
+ tmp_mb = (1 + pvt->tolm) >> 20;
+
+ debugf0("TOLM: %Lu.%03Lu GB (0x%016Lx)\n",
+ tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tolm);
+
+ /* Address range is already 45:25 */
+ pci_read_config_dword(pvt->pci_sad1, TOHM,
+ ®);
+ pvt->tohm = GET_TOHM(reg);
+ tmp_mb = (1 + pvt->tohm) >> 20;
+
+ debugf0("TOHM: %Lu.%03Lu GB (0x%016Lx)",
+ tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tohm);
+
+ /*
+ * Step 2) Get SAD range and SAD Interleave list
+ * TAD registers contain the interleave wayness. However, it
+ * seems simpler to just discover it indirectly, with the
+ * algorithm bellow.
+ */
+ prv = 0;
+ for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
+ /* SAD_LIMIT Address range is 45:26 */
+ pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
+ ®);
+ limit = SAD_LIMIT(reg);
+
+ if (!DRAM_RULE_ENABLE(reg))
+ continue;
+
+ if (limit <= prv)
+ break;
+
+ tmp_mb = (limit + 1) >> 20;
+ debugf0("SAD#%d %s up to %Lu.%03Lu GB (0x%016Lx) %s reg=0x%08x\n",
+ n_sads,
+ get_dram_attr(reg),
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
+ reg);
+ prv = limit;
+
+ pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
+ ®);
+ sad_interl = sad_pkg(reg, 0);
+ for (j = 0; j < 8; j++) {
+ if (j > 0 && sad_interl == sad_pkg(reg, j))
+ break;
+
+ debugf0("SAD#%d, interleave #%d: %d\n",
+ n_sads, j, sad_pkg(reg, j));
+ }
+ }
+
+ /*
+ * Step 3) Get TAD range
+ */
+ prv = 0;
+ for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+ pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
+ ®);
+ limit = TAD_LIMIT(reg);
+ if (limit <= prv)
+ break;
+ tmp_mb = (limit + 1) >> 20;
+
+ debugf0("TAD#%d: up to %Lu.%03Lu GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
+ n_tads, tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ (u32)TAD_SOCK(reg),
+ (u32)TAD_CH(reg),
+ (u32)TAD_TGT0(reg),
+ (u32)TAD_TGT1(reg),
+ (u32)TAD_TGT2(reg),
+ (u32)TAD_TGT3(reg),
+ reg);
+ prv = tmp_mb;
+ }
+
+ /*
+ * Step 4) Get TAD offsets, per each channel
+ */
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (!pvt->channel[i].dimms)
+ continue;
+ for (j = 0; j < n_tads; j++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ tad_ch_nilv_offset[j],
+ ®);
+ tmp_mb = TAD_OFFSET(reg) >> 20;
+ debugf0("TAD CH#%d, offset #%d: %Lu.%03Lu GB (0x%016Lx), reg=0x%08x\n",
+ i, j,
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ reg);
+ }
+ }
+
+ /*
+ * Step 6) Get RIR Wayness/Limit, per each channel
+ */
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (!pvt->channel[i].dimms)
+ continue;
+ for (j = 0; j < MAX_RIR_RANGES; j++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ rir_way_limit[j],
+ ®);
+
+ if (!IS_RIR_VALID(reg))
+ continue;
+
+ tmp_mb = RIR_LIMIT(reg) >> 20;
+ rir_way = 1 << RIR_WAY(reg);
+ debugf0("CH#%d RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d, reg=0x%08x\n",
+ i, j,
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ rir_way,
+ reg);
+
+ for (k = 0; k < rir_way; k++) {
+ pci_read_config_dword(pvt->pci_tad[i],
+ rir_offset[j][k],
+ ®);
+ tmp_mb = RIR_OFFSET(reg) << 6;
+
+ debugf0("CH#%d RIR#%d INTL#%d, offset %Lu.%03Lu GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
+ i, j, k,
+ tmp_mb / 1000, tmp_mb % 1000,
+ ((u64)tmp_mb) << 20L,
+ (u32)RIR_RNK_TGT(reg),
+ reg);
+ }
+ }
+ }
+}
+
+struct mem_ctl_info *get_mci_for_node_id(u8 node_id)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+ if (sbridge_dev->node_id == node_id)
+ return sbridge_dev->mci;
+ }
+ return NULL;
+}
+
+static int get_memory_error_data(struct mem_ctl_info *mci,
+ u64 addr,
+ u8 *socket,
+ long *channel_mask,
+ u8 *rank,
+ char *area_type)
+{
+ struct mem_ctl_info *new_mci;
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ char msg[256];
+ int n_rir, n_sads, n_tads, sad_way, sck_xch;
+ int sad_interl, idx, base_ch;
+ int interleave_mode;
+ unsigned sad_interleave[MAX_INTERLEAVE];
+ u32 reg;
+ u8 ch_way,sck_way;
+ u32 tad_offset;
+ u32 rir_way;
+ u64 ch_addr, offset, limit, prv = 0;
+
+
+ /*
+ * Step 0) Check if the address is at special memory ranges
+ * The check bellow is probably enough to fill all cases where
+ * the error is not inside a memory, except for the legacy
+ * range (e. g. VGA addresses). It is unlikely, however, that the
+ * memory controller would generate an error on that range.
+ */
+ if ((addr > (u64) pvt->tolm) && (addr < (1L << 32))) {
+ sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ if (addr >= (u64)pvt->tohm) {
+ sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+
+ /*
+ * Step 1) Get socket
+ */
+ for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
+ pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
+ ®);
+
+ if (!DRAM_RULE_ENABLE(reg))
+ continue;
+
+ limit = SAD_LIMIT(reg);
+ if (limit <= prv) {
+ sprintf(msg, "Can't discover the memory socket");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ if (addr <= limit)
+ break;
+ prv = limit;
+ }
+ if (n_sads == MAX_SAD) {
+ sprintf(msg, "Can't discover the memory socket");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ area_type = get_dram_attr(reg);
+ interleave_mode = INTERLEAVE_MODE(reg);
+
+ pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
+ ®);
+ sad_interl = sad_pkg(reg, 0);
+ for (sad_way = 0; sad_way < 8; sad_way++) {
+ if (sad_way > 0 && sad_interl == sad_pkg(reg, sad_way))
+ break;
+ sad_interleave[sad_way] = sad_pkg(reg, sad_way);
+ debugf0("SAD interleave #%d: %d\n",
+ sad_way, sad_interleave[sad_way]);
+ }
+ debugf0("mc#%d: Error detected on SAD#%d: address 0x%016Lx < 0x%016Lx, Interleave [%d:6]%s\n",
+ pvt->sbridge_dev->mc,
+ n_sads,
+ addr,
+ limit,
+ sad_way + 7,
+ INTERLEAVE_MODE(reg) ? "" : "XOR[18:16]");
+ if (interleave_mode)
+ idx = ((addr >> 6) ^ (addr >> 16)) & 7;
+ else
+ idx = (addr >> 6) & 7;
+ switch (sad_way) {
+ case 1:
+ idx = 0;
+ break;
+ case 2:
+ idx = idx & 1;
+ break;
+ case 4:
+ idx = idx & 3;
+ break;
+ case 8:
+ break;
+ default:
+ sprintf(msg, "Can't discover socket interleave");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ *socket = sad_interleave[idx];
+ debugf0("SAD interleave index: %d (wayness %d) = CPU socket %d\n",
+ idx, sad_way, *socket);
+
+ /*
+ * Move to the proper node structure, in order to access the
+ * right PCI registers
+ */
+ new_mci = get_mci_for_node_id(*socket);
+ if (!new_mci) {
+ sprintf(msg, "Struct for socket #%u wasn't initialized",
+ *socket);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ mci = new_mci;
+ pvt = mci->pvt_info;
+
+ /*
+ * Step 2) Get memory channel
+ */
+ prv = 0;
+ for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+ pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
+ ®);
+ limit = TAD_LIMIT(reg);
+ if (limit <= prv) {
+ sprintf(msg, "Can't discover the memory channel");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ if (addr <= limit)
+ break;
+ prv = limit;
+ }
+ ch_way = TAD_CH(reg) + 1;
+ sck_way = TAD_SOCK(reg) + 1;
+ /*
+ * FIXME: Is it right to always use channel 0 for offsets?
+ */
+ pci_read_config_dword(pvt->pci_tad[0],
+ tad_ch_nilv_offset[n_tads],
+ &tad_offset);
+
+ if (ch_way == 3)
+ idx = addr >> 6;
+ else
+ idx = addr >> (6 + sck_way);
+ idx = idx % ch_way;
+
+ /*
+ * FIXME: Shouldn't we use CHN_IDX_OFFSET() here, when ch_way == 3 ???
+ */
+ switch (idx) {
+ case 0:
+ base_ch = TAD_TGT0(reg);
+ break;
+ case 1:
+ base_ch = TAD_TGT1(reg);
+ break;
+ case 2:
+ base_ch = TAD_TGT2(reg);
+ break;
+ case 3:
+ base_ch = TAD_TGT3(reg);
+ break;
+ default:
+ sprintf(msg, "Can't discover the TAD target");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ *channel_mask = 1 << base_ch;
+
+ if (pvt->is_mirrored) {
+ *channel_mask |= 1 << ((base_ch + 2) % 4);
+ switch(ch_way) {
+ case 2:
+ case 4:
+ sck_xch = 1 << sck_way * (ch_way >> 1);
+ break;
+ default:
+ sprintf(msg, "Invalid mirror set. Can't decode addr");
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ } else
+ sck_xch = (1 << sck_way) * ch_way;
+
+ if (pvt->is_lockstep)
+ *channel_mask |= 1 << ((base_ch + 1) % 4);
+
+ offset = TAD_OFFSET(tad_offset);
+
+ debugf0("TAD#%d: address 0x%016Lx < 0x%016Lx, socket interleave %d, channel interleave %d (offset 0x%08Lx), index %d, base ch: %d, ch mask: 0x%02lx\n",
+ n_tads,
+ addr,
+ limit,
+ (u32)TAD_SOCK(reg),
+ ch_way,
+ offset,
+ idx,
+ base_ch,
+ *channel_mask);
+
+ /* Calculate channel address */
+ /* Remove the TAD offset */
+
+ if (offset > addr) {
+ sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!",
+ offset, addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ addr -= offset;
+ /* Store the low bits [0:6] of the addr */
+ ch_addr = addr & 0x7f;
+ /* Remove socket wayness and remove 6 bits */
+ addr >>= 6;
+ addr /= sck_xch;
+#if 0
+ /* Divide by channel way */
+ addr = addr / ch_way;
+#endif
+ /* Recover the last 6 bits */
+ ch_addr |= addr << 6;
+
+ /*
+ * Step 3) Decode rank
+ */
+ for (n_rir = 0; n_rir < MAX_RIR_RANGES; n_rir++) {
+ pci_read_config_dword(pvt->pci_tad[base_ch],
+ rir_way_limit[n_rir],
+ ®);
+
+ if (!IS_RIR_VALID(reg))
+ continue;
+
+ limit = RIR_LIMIT(reg);
+
+ debugf0("RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d\n",
+ n_rir,
+ (limit >> 20) / 1000, (limit >> 20) % 1000,
+ limit,
+ 1 << RIR_WAY(reg));
+ if (ch_addr <= limit)
+ break;
+ }
+ if (n_rir == MAX_RIR_RANGES) {
+ sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx",
+ ch_addr);
+ edac_mc_handle_ce_no_info(mci, msg);
+ return -EINVAL;
+ }
+ rir_way = RIR_WAY(reg);
+ if (pvt->is_close_pg)
+ idx = (ch_addr >> 6);
+ else
+ idx = (ch_addr >> 13); /* FIXME: Datasheet says to shift by 15 */
+ idx %= 1 << rir_way;
+
+ pci_read_config_dword(pvt->pci_tad[base_ch],
+ rir_offset[n_rir][idx],
+ ®);
+ *rank = RIR_RNK_TGT(reg);
+
+ debugf0("RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n",
+ n_rir,
+ ch_addr,
+ limit,
+ rir_way,
+ idx);
+
+ return 0;
+}
+
+/****************************************************************************
+ Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ * sbridge_put_all_devices 'put' all the devices that we have
+ * reserved via 'get'
+ */
+static void sbridge_put_devices(struct sbridge_dev *sbridge_dev)
+{
+ int i;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+ for (i = 0; i < sbridge_dev->n_devs; i++) {
+ struct pci_dev *pdev = sbridge_dev->pdev[i];
+ if (!pdev)
+ continue;
+ debugf0("Removing dev %02x:%02x.%d\n",
+ pdev->bus->number,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ pci_dev_put(pdev);
+ }
+}
+
+static void sbridge_put_all_devices(void)
+{
+ struct sbridge_dev *sbridge_dev, *tmp;
+
+ list_for_each_entry_safe(sbridge_dev, tmp, &sbridge_edac_list, list) {
+ sbridge_put_devices(sbridge_dev);
+ free_sbridge_dev(sbridge_dev);
+ }
+}
+
+/*
+ * sbridge_get_all_devices Find and perform 'get' operation on the MCH's
+ * device/functions we want to reference for this driver
+ *
+ * Need to 'get' device 16 func 1 and func 2
+ */
+static int sbridge_get_onedevice(struct pci_dev **prev,
+ u8 *num_mc,
+ const struct pci_id_table *table,
+ const unsigned devno)
+{
+ struct sbridge_dev *sbridge_dev;
+ const struct pci_id_descr *dev_descr = &table->descr[devno];
+
+ struct pci_dev *pdev = NULL;
+ u8 bus = 0;
+
+ sbridge_printk(KERN_INFO,
+ "Seeking for: dev %02x.%d PCI ID %04x:%04x\n",
+ dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ dev_descr->dev_id, *prev);
+
+ if (!pdev) {
+ if (*prev) {
+ *prev = pdev;
+ return 0;
+ }
+
+ if (dev_descr->optional)
+ return 0;
+
+ if (devno == 0)
+ return -ENODEV;
+
+ sbridge_printk(KERN_INFO,
+ "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+ dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ /* End of list, leave */
+ return -ENODEV;
+ }
+ bus = pdev->bus->number;
+
+ sbridge_dev = get_sbridge_dev(bus);
+ if (!sbridge_dev) {
+ sbridge_dev = alloc_sbridge_dev(bus, table);
+ if (!sbridge_dev) {
+ pci_dev_put(pdev);
+ return -ENOMEM;
+ }
+ (*num_mc)++;
+ }
+
+ if (sbridge_dev->pdev[devno]) {
+ sbridge_printk(KERN_ERR,
+ "Duplicated device for "
+ "dev %02x:%d.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
+
+ sbridge_dev->pdev[devno] = pdev;
+
+ /* Sanity check */
+ if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+ PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+ sbridge_printk(KERN_ERR,
+ "Device PCI ID %04x:%04x "
+ "has dev %02x:%d.%d instead of dev %02x:%02x.%d\n",
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+ bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ bus, dev_descr->dev, dev_descr->func);
+ return -ENODEV;
+ }
+
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ sbridge_printk(KERN_ERR,
+ "Couldn't enable "
+ "dev %02x:%d.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev, dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+ return -ENODEV;
+ }
+
+ debugf0("Detected dev %02x:%d.%d PCI ID %04x:%04x\n",
+ bus, dev_descr->dev,
+ dev_descr->func,
+ PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+ /*
+ * As stated on drivers/pci/search.c, the reference count for
+ * @from is always decremented if it is not %NULL. So, as we need
+ * to get all devices up to null, we need to do a get for the device
+ */
+ pci_dev_get(pdev);
+
+ *prev = pdev;
+
+ return 0;
+}
+
+static int sbridge_get_all_devices(u8 *num_mc)
+{
+ int i, rc;
+ struct pci_dev *pdev = NULL;
+ const struct pci_id_table *table = pci_dev_descr_sbridge_table;
+
+ while (table && table->descr) {
+ for (i = 0; i < table->n_devs; i++) {
+ pdev = NULL;
+ do {
+ rc = sbridge_get_onedevice(&pdev, num_mc,
+ table, i);
+ if (rc < 0) {
+ if (i == 0) {
+ i = table->n_devs;
+ break;
+ }
+ sbridge_put_all_devices();
+ return -ENODEV;
+ }
+ } while (pdev);
+ }
+ table++;
+ }
+
+ return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+ struct sbridge_dev *sbridge_dev)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ struct pci_dev *pdev;
+ int i, func, slot;
+
+ for (i = 0; i < sbridge_dev->n_devs; i++) {
+ pdev = sbridge_dev->pdev[i];
+ if (!pdev)
+ continue;
+ slot = PCI_SLOT(pdev->devfn);
+ func = PCI_FUNC(pdev->devfn);
+ switch (slot) {
+ case 12:
+ switch (func) {
+ case 6:
+ pvt->pci_sad0 = pdev;
+ break;
+ case 7:
+ pvt->pci_sad1 = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 13:
+ switch (func) {
+ case 6:
+ pvt->pci_br = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 14:
+ switch (func) {
+ case 0:
+ pvt->pci_ha0 = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 15:
+ switch (func) {
+ case 0:
+ pvt->pci_ta = pdev;
+ break;
+ case 1:
+ pvt->pci_ras = pdev;
+ break;
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ pvt->pci_tad[func - 2] = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case 17:
+ switch (func) {
+ case 0:
+ pvt->pci_ddrio = pdev;
+ break;
+ default:
+ goto error;
+ }
+ break;
+ default:
+ goto error;
+ }
+
+ debugf0("Associated PCI %02x.%02d.%d with dev = %p\n",
+ sbridge_dev->bus,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+ pdev);
+ }
+
+ /* Check if everything were registered */
+ if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha0 ||
+ !pvt-> pci_tad || !pvt->pci_ras || !pvt->pci_ta ||
+ !pvt->pci_ddrio)
+ goto enodev;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (!pvt->pci_tad[i])
+ goto enodev;
+ }
+ return 0;
+
+enodev:
+ sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+ return -ENODEV;
+
+error:
+ sbridge_printk(KERN_ERR, "Device %d, function %d "
+ "is out of the expected range\n",
+ slot, func);
+ return -EINVAL;
+}
+
+/****************************************************************************
+ Error check routines
+ ****************************************************************************/
+
+/*
+ * While Sandy Bridge has error count registers, SMI BIOS read values from
+ * and resets the counters. So, they are not reliable for the OS to read
+ * from them. So, we have no option but to just trust on whatever MCE is
+ * telling us about the errors.
+ */
+static void sbridge_mce_output_error(struct mem_ctl_info *mci,
+ const struct mce *m)
+{
+ struct mem_ctl_info *new_mci;
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ char *type, *optype, *msg, *recoverable_msg;
+ bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
+ bool overflow = GET_BITFIELD(m->status, 62, 62);
+ bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
+ bool recoverable = GET_BITFIELD(m->status, 56, 56);
+ u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+ u32 mscod = GET_BITFIELD(m->status, 16, 31);
+ u32 errcode = GET_BITFIELD(m->status, 0, 15);
+ u32 channel = GET_BITFIELD(m->status, 0, 3);
+ u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+ long channel_mask, first_channel;
+ u8 rank, socket;
+ int csrow, rc, dimm;
+ char *area_type = "Unknown";
+
+ if (ripv)
+ type = "NON_FATAL";
+ else
+ type = "FATAL";
+
+ /*
+ * According with Table 15-9 of the Intel Archictecture spec vol 3A,
+ * memory errors should fit in this mask:
+ * 000f 0000 1mmm cccc (binary)
+ * where:
+ * f = Correction Report Filtering Bit. If 1, subsequent errors
+ * won't be shown
+ * mmm = error type
+ * cccc = channel
+ * If the mask doesn't match, report an error to the parsing logic
+ */
+ if (! ((errcode & 0xef80) == 0x80)) {
+ optype = "Can't parse: it is not a mem";
+ } else {
+ switch (optypenum) {
+ case 0:
+ optype = "generic undef request";
+ break;
+ case 1:
+ optype = "memory read";
+ break;
+ case 2:
+ optype = "memory write";
+ break;
+ case 3:
+ optype = "addr/cmd";
+ break;
+ case 4:
+ optype = "memory scrubbing";
+ break;
+ default:
+ optype = "reserved";
+ break;
+ }
+ }
+
+ rc = get_memory_error_data(mci, m->addr, &socket,
+ &channel_mask, &rank, area_type);
+ if (rc < 0)
+ return;
+ new_mci = get_mci_for_node_id(socket);
+ if (!new_mci) {
+ edac_mc_handle_ce_no_info(mci, "Error: socket got corrupted!");
+ return;
+ }
+ mci = new_mci;
+ pvt = mci->pvt_info;
+
+ first_channel = find_first_bit(&channel_mask, NUM_CHANNELS);
+
+ if (rank < 4)
+ dimm = 0;
+ else if (rank < 8)
+ dimm = 1;
+ else
+ dimm = 2;
+
+ csrow = pvt->csrow_map[first_channel][dimm];
+
+ if (uncorrected_error && recoverable)
+ recoverable_msg = " recoverable";
+ else
+ recoverable_msg = "";
+
+ /*
+ * FIXME: What should we do with "channel" information on mcelog?
+ * Probably, we can just discard it, as the channel information
+ * comes from the get_memory_error_data() address decoding
+ */
+ msg = kasprintf(GFP_ATOMIC,
+ "%d %s error(s): %s on %s area %s%s: cpu=%d Err=%04x:%04x (ch=%d), "
+ "addr = 0x%08llx => socket=%d, Channel=%ld(mask=%ld), rank=%d\n",
+ core_err_cnt,
+ area_type,
+ optype,
+ type,
+ recoverable_msg,
+ overflow ? "OVERFLOW" : "",
+ m->cpu,
+ mscod, errcode,
+ channel, /* 1111b means not specified */
+ (long long) m->addr,
+ socket,
+ first_channel, /* This is the real channel on SB */
+ channel_mask,
+ rank);
+
+ debugf0("%s", msg);
+
+ /* Call the helper to output message */
+ if (uncorrected_error)
+ edac_mc_handle_fbd_ue(mci, csrow, 0, 0, msg);
+ else
+ edac_mc_handle_fbd_ce(mci, csrow, 0, msg);
+
+ kfree(msg);
+}
+
+/*
+ * sbridge_check_error Retrieve and process errors reported by the
+ * hardware. Called by the Core module.
+ */
+static void sbridge_check_error(struct mem_ctl_info *mci)
+{
+ struct sbridge_pvt *pvt = mci->pvt_info;
+ int i;
+ unsigned count = 0;
+ struct mce *m;
+
+ /*
+ * MCE first step: Copy all mce errors into a temporary buffer
+ * We use a double buffering here, to reduce the risk of
+ * loosing an error.
+ */
+ smp_rmb();
+ count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+ % MCE_LOG_LEN;
+ if (!count)
+ return;
+
+ m = pvt->mce_outentry;
+ if (pvt->mce_in + count > MCE_LOG_LEN) {
+ unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+ smp_wmb();
+ pvt->mce_in = 0;
+ count -= l;
+ m += l;
+ }
+ memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+ smp_wmb();
+ pvt->mce_in += count;
+
+ smp_rmb();
+ if (pvt->mce_overrun) {
+ sbridge_printk(KERN_ERR, "Lost %d memory errors\n",
+ pvt->mce_overrun);
+ smp_wmb();
+ pvt->mce_overrun = 0;
+ }
+
+ /*
+ * MCE second step: parse errors and display
+ */
+ for (i = 0; i < count; i++)
+ sbridge_mce_output_error(mci, &pvt->mce_outentry[i]);
+}
+
+/*
+ * sbridge_mce_check_error Replicates mcelog routine to get errors
+ * This routine simply queues mcelog errors, and
+ * return. The error itself should be handled later
+ * by sbridge_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
+ void *data)
+{
+ struct mce *mce = (struct mce *)data;
+ struct mem_ctl_info *mci;
+ struct sbridge_pvt *pvt;
+
+ mci = get_mci_for_node_id(mce->socketid);
+ if (!mci)
+ return NOTIFY_BAD;
+ pvt = mci->pvt_info;
+
+ /*
+ * Just let mcelog handle it if the error is
+ * outside the memory controller. A memory error
+ * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0.
+ * bit 12 has an special meaning.
+ */
+ if ((mce->status & 0xefff) >> 7 != 1)
+ return NOTIFY_DONE;
+
+ printk("sbridge: HANDLING MCE MEMORY ERROR\n");
+
+ printk("CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n",
+ mce->extcpu, mce->mcgstatus, mce->bank, mce->status);
+ printk("TSC %llx ", mce->tsc);
+ printk("ADDR %llx ", mce->addr);
+ printk("MISC %llx ", mce->misc);
+
+ printk("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+ mce->cpuvendor, mce->cpuid, mce->time,
+ mce->socketid, mce->apicid);
+
+#ifdef CONFIG_SMP
+ /* Only handle if it is the right mc controller */
+ if (cpu_data(mce->cpu).phys_proc_id != pvt->sbridge_dev->mc)
+ return NOTIFY_DONE;
+#endif
+
+ smp_rmb();
+ if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+ smp_wmb();
+ pvt->mce_overrun++;
+ return NOTIFY_DONE;
+ }
+
+ /* Copy memory error at the ringbuffer */
+ memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+ smp_wmb();
+ pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+ /* Handle fatal errors immediately */
+ if (mce->mcgstatus & 1)
+ sbridge_check_error(mci);
+
+ /* Advice mcelog that the error were handled */
+ return NOTIFY_STOP;
+}
+
+static struct notifier_block sbridge_mce_dec = {
+ .notifier_call = sbridge_mce_check_error,
+};
+
+/****************************************************************************
+ EDAC register/unregister logic
+ ****************************************************************************/
+
+static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev)
+{
+ struct mem_ctl_info *mci = sbridge_dev->mci;
+ struct sbridge_pvt *pvt;
+
+ if (unlikely(!mci || !mci->pvt_info)) {
+ debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
+ __func__, &sbridge_dev->pdev[0]->dev);
+
+ sbridge_printk(KERN_ERR, "Couldn't find mci handler\n");
+ return;
+ }
+
+ pvt = mci->pvt_info;
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
+ __func__, mci, &sbridge_dev->pdev[0]->dev);
+
+ atomic_notifier_chain_unregister(&x86_mce_decoder_chain,
+ &sbridge_mce_dec);
+
+ /* Remove MC sysfs nodes */
+ edac_mc_del_mc(mci->dev);
+
+ debugf1("%s: free mci struct\n", mci->ctl_name);
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ sbridge_dev->mci = NULL;
+}
+
+static int sbridge_register_mci(struct sbridge_dev *sbridge_dev)
+{
+ struct mem_ctl_info *mci;
+ struct sbridge_pvt *pvt;
+ int rc, channels, csrows;
+
+ /* Check the number of active and not disabled channels */
+ rc = sbridge_get_active_channels(sbridge_dev->bus, &channels, &csrows);
+ if (unlikely(rc < 0))
+ return rc;
+
+ /* allocate a new MC control structure */
+ mci = edac_mc_alloc(sizeof(*pvt), csrows, channels, sbridge_dev->mc);
+ if (unlikely(!mci))
+ return -ENOMEM;
+
+ debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
+ __func__, mci, &sbridge_dev->pdev[0]->dev);
+
+ pvt = mci->pvt_info;
+ memset(pvt, 0, sizeof(*pvt));
+
+ /* Associate sbridge_dev and mci for future usage */
+ pvt->sbridge_dev = sbridge_dev;
+ sbridge_dev->mci = mci;
+
+ mci->mtype_cap = MEM_FLAG_DDR3;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE;
+ mci->edac_cap = EDAC_FLAG_NONE;
+ mci->mod_name = "sbridge_edac.c";
+ mci->mod_ver = SBRIDGE_REVISION;
+ mci->ctl_name = kasprintf(GFP_KERNEL, "Sandy Bridge Socket#%d", mci->mc_idx);
+ mci->dev_name = pci_name(sbridge_dev->pdev[0]);
+ mci->ctl_page_to_phys = NULL;
+
+ /* Set the function pointer to an actual operation function */
+ mci->edac_check = sbridge_check_error;
+
+ /* Store pci devices at mci for faster access */
+ rc = mci_bind_devs(mci, sbridge_dev);
+ if (unlikely(rc < 0))
+ goto fail0;
+
+ /* Get dimm basic config and the memory layout */
+ get_dimm_config(mci);
+ get_memory_layout(mci);
+
+ /* record ptr to the generic device */
+ mci->dev = &sbridge_dev->pdev[0]->dev;
+
+ /* add this new MC control structure to EDAC's list of MCs */
+ if (unlikely(edac_mc_add_mc(mci))) {
+ debugf0("MC: " __FILE__
+ ": %s(): failed edac_mc_add_mc()\n", __func__);
+ rc = -EINVAL;
+ goto fail0;
+ }
+
+ atomic_notifier_chain_register(&x86_mce_decoder_chain,
+ &sbridge_mce_dec);
+ return 0;
+
+fail0:
+ kfree(mci->ctl_name);
+ edac_mc_free(mci);
+ sbridge_dev->mci = NULL;
+ return rc;
+}
+
+/*
+ * sbridge_probe Probe for ONE instance of device to see if it is
+ * present.
+ * return:
+ * 0 for FOUND a device
+ * < 0 for error code
+ */
+
+static int __devinit sbridge_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int rc;
+ u8 mc, num_mc = 0;
+ struct sbridge_dev *sbridge_dev;
+
+ /* get the pci devices we want to reserve for our use */
+ mutex_lock(&sbridge_edac_lock);
+
+ /*
+ * All memory controllers are allocated at the first pass.
+ */
+ if (unlikely(probed >= 1)) {
+ mutex_unlock(&sbridge_edac_lock);
+ return -ENODEV;
+ }
+ probed++;
+
+ rc = sbridge_get_all_devices(&num_mc);
+ if (unlikely(rc < 0))
+ goto fail0;
+ mc = 0;
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+ debugf0("Registering MC#%d (%d of %d)\n", mc, mc + 1, num_mc);
+ sbridge_dev->mc = mc++;
+ rc = sbridge_register_mci(sbridge_dev);
+ if (unlikely(rc < 0))
+ goto fail1;
+ }
+
+ sbridge_printk(KERN_INFO, "Driver loaded.\n");
+
+ mutex_unlock(&sbridge_edac_lock);
+ return 0;
+
+fail1:
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+ sbridge_unregister_mci(sbridge_dev);
+
+ sbridge_put_all_devices();
+fail0:
+ mutex_unlock(&sbridge_edac_lock);
+ return rc;
+}
+
+/*
+ * sbridge_remove destructor for one instance of device
+ *
+ */
+static void __devexit sbridge_remove(struct pci_dev *pdev)
+{
+ struct sbridge_dev *sbridge_dev;
+
+ debugf0(__FILE__ ": %s()\n", __func__);
+
+ /*
+ * we have a trouble here: pdev value for removal will be wrong, since
+ * it will point to the X58 register used to detect that the machine
+ * is a Nehalem or upper design. However, due to the way several PCI
+ * devices are grouped together to provide MC functionality, we need
+ * to use a different method for releasing the devices
+ */
+
+ mutex_lock(&sbridge_edac_lock);
+
+ if (unlikely(!probed)) {
+ mutex_unlock(&sbridge_edac_lock);
+ return;
+ }
+
+ list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+ sbridge_unregister_mci(sbridge_dev);
+
+ /* Release PCI resources */
+ sbridge_put_all_devices();
+
+ probed--;
+
+ mutex_unlock(&sbridge_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, sbridge_pci_tbl);
+
+/*
+ * sbridge_driver pci_driver structure for this module
+ *
+ */
+static struct pci_driver sbridge_driver = {
+ .name = "sbridge_edac",
+ .probe = sbridge_probe,
+ .remove = __devexit_p(sbridge_remove),
+ .id_table = sbridge_pci_tbl,
+};
+
+/*
+ * sbridge_init Module entry function
+ * Try to initialize this module for its devices
+ */
+static int __init sbridge_init(void)
+{
+ int pci_rc;
+
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ pci_rc = pci_register_driver(&sbridge_driver);
+
+ if (pci_rc >= 0)
+ return 0;
+
+ sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
+ pci_rc);
+
+ return pci_rc;
+}
+
+/*
+ * sbridge_exit() Module exit function
+ * Unregister the driver
+ */
+static void __exit sbridge_exit(void)
+{
+ debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ pci_unregister_driver(&sbridge_driver);
+}
+
+module_init(sbridge_init);
+module_exit(sbridge_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel Sandy Bridge memory controllers - "
+ SBRIDGE_REVISION);
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index 334b82a..855ab3f 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -1046,8 +1046,8 @@
cycles = card->split_timeout_hi * 8000 + (card->split_timeout_lo >> 19);
- cycles = max(cycles, 800u); /* minimum as per the spec */
- cycles = min(cycles, 3u * 8000u); /* maximum OHCI timeout */
+ /* minimum per IEEE 1394, maximum which doesn't overflow OHCI */
+ cycles = clamp(cycles, 800u, 3u * 8000u);
card->split_timeout_cycles = cycles;
card->split_timeout_jiffies = DIV_ROUND_UP(cycles * HZ, 8000);
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 03a7a85..a20f45b 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -502,11 +502,7 @@
static unsigned fwnet_max_payload(unsigned max_rec, unsigned speed)
{
max_rec = min(max_rec, speed + 8);
- max_rec = min(max_rec, 0xbU); /* <= 4096 */
- if (max_rec < 8) {
- fw_notify("max_rec %x out of range\n", max_rec);
- max_rec = 8;
- }
+ max_rec = clamp(max_rec, 8U, 11U); /* 512...4096 */
return (1 << (max_rec + 1)) - RFC2374_FRAG_HDR_SIZE;
}
@@ -1125,17 +1121,12 @@
unsigned u;
if (dev->local_fifo == FWNET_NO_FIFO_ADDR) {
- /* outside OHCI posted write area? */
- static const struct fw_address_region region = {
- .start = 0xffff00000000ULL,
- .end = CSR_REGISTER_BASE,
- };
-
dev->handler.length = 4096;
dev->handler.address_callback = fwnet_receive_packet;
dev->handler.callback_data = dev;
- retval = fw_core_add_address_handler(&dev->handler, ®ion);
+ retval = fw_core_add_address_handler(&dev->handler,
+ &fw_high_memory_region);
if (retval < 0)
goto failed_initial;
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index fd7170a..6628fea 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -42,6 +42,7 @@
#include <linux/string.h>
#include <linux/time.h>
#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
#include <asm/byteorder.h>
#include <asm/page.h>
@@ -125,6 +126,7 @@
struct fw_ohci *ohci;
u32 regs;
int total_allocation;
+ u32 current_bus;
bool running;
bool flushing;
@@ -226,7 +228,7 @@
__le32 *self_id_cpu;
dma_addr_t self_id_bus;
- struct tasklet_struct bus_reset_tasklet;
+ struct work_struct bus_reset_work;
u32 self_id_buffer[512];
};
@@ -263,6 +265,8 @@
#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
+#define PCI_DEVICE_ID_TI_TSB12LV26 0x8020
+#define PCI_DEVICE_ID_TI_TSB82AA2 0x8025
#define PCI_VENDOR_ID_PINNACLE_SYSTEMS 0x11bd
#define QUIRK_CYCLE_TIMER 1
@@ -270,6 +274,7 @@
#define QUIRK_BE_HEADERS 4
#define QUIRK_NO_1394A 8
#define QUIRK_NO_MSI 16
+#define QUIRK_TI_SLLZ059 32
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
@@ -299,6 +304,12 @@
{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV26, PCI_ANY_ID,
+ QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059},
+
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB82AA2, PCI_ANY_ID,
+ QUIRK_RESET_PACKET | QUIRK_TI_SLLZ059},
+
{PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID,
QUIRK_RESET_PACKET},
@@ -315,6 +326,7 @@
", AR/selfID endianess = " __stringify(QUIRK_BE_HEADERS)
", no 1394a enhancements = " __stringify(QUIRK_NO_1394A)
", disable MSI = " __stringify(QUIRK_NO_MSI)
+ ", TI SLLZ059 erratum = " __stringify(QUIRK_TI_SLLZ059)
")");
#define OHCI_PARAM_DEBUG_AT_AR 1
@@ -859,7 +871,7 @@
*
* Alas some chips sometimes emit bus reset packets with a
* wrong generation. We set the correct generation for these
- * at a slightly incorrect time (in bus_reset_tasklet).
+ * at a slightly incorrect time (in bus_reset_work).
*/
if (evt == OHCI1394_evt_bus_reset) {
if (!(ohci->quirks & QUIRK_RESET_PACKET))
@@ -1046,6 +1058,7 @@
address = le32_to_cpu(last->branch_address);
z = address & 0xf;
address &= ~0xf;
+ ctx->current_bus = address;
/* If the branch address points to a buffer outside of the
* current buffer, advance to the next buffer. */
@@ -1713,9 +1726,94 @@
return ohci->bus_time | cycle_time_seconds;
}
-static void bus_reset_tasklet(unsigned long data)
+static int get_status_for_port(struct fw_ohci *ohci, int port_index)
{
- struct fw_ohci *ohci = (struct fw_ohci *)data;
+ int reg;
+
+ mutex_lock(&ohci->phy_reg_mutex);
+ reg = write_phy_reg(ohci, 7, port_index);
+ if (reg >= 0)
+ reg = read_phy_reg(ohci, 8);
+ mutex_unlock(&ohci->phy_reg_mutex);
+ if (reg < 0)
+ return reg;
+
+ switch (reg & 0x0f) {
+ case 0x06:
+ return 2; /* is child node (connected to parent node) */
+ case 0x0e:
+ return 3; /* is parent node (connected to child node) */
+ }
+ return 1; /* not connected */
+}
+
+static int get_self_id_pos(struct fw_ohci *ohci, u32 self_id,
+ int self_id_count)
+{
+ int i;
+ u32 entry;
+
+ for (i = 0; i < self_id_count; i++) {
+ entry = ohci->self_id_buffer[i];
+ if ((self_id & 0xff000000) == (entry & 0xff000000))
+ return -1;
+ if ((self_id & 0xff000000) < (entry & 0xff000000))
+ return i;
+ }
+ return i;
+}
+
+/*
+ * TI TSB82AA2B and TSB12LV26 do not receive the selfID of a locally
+ * attached TSB41BA3D phy; see http://www.ti.com/litv/pdf/sllz059.
+ * Construct the selfID from phy register contents.
+ * FIXME: How to determine the selfID.i flag?
+ */
+static int find_and_insert_self_id(struct fw_ohci *ohci, int self_id_count)
+{
+ int reg, i, pos, status;
+ /* link active 1, speed 3, bridge 0, contender 1, more packets 0 */
+ u32 self_id = 0x8040c800;
+
+ reg = reg_read(ohci, OHCI1394_NodeID);
+ if (!(reg & OHCI1394_NodeID_idValid)) {
+ fw_notify("node ID not valid, new bus reset in progress\n");
+ return -EBUSY;
+ }
+ self_id |= ((reg & 0x3f) << 24); /* phy ID */
+
+ reg = ohci_read_phy_reg(&ohci->card, 4);
+ if (reg < 0)
+ return reg;
+ self_id |= ((reg & 0x07) << 8); /* power class */
+
+ reg = ohci_read_phy_reg(&ohci->card, 1);
+ if (reg < 0)
+ return reg;
+ self_id |= ((reg & 0x3f) << 16); /* gap count */
+
+ for (i = 0; i < 3; i++) {
+ status = get_status_for_port(ohci, i);
+ if (status < 0)
+ return status;
+ self_id |= ((status & 0x3) << (6 - (i * 2)));
+ }
+
+ pos = get_self_id_pos(ohci, self_id, self_id_count);
+ if (pos >= 0) {
+ memmove(&(ohci->self_id_buffer[pos+1]),
+ &(ohci->self_id_buffer[pos]),
+ (self_id_count - pos) * sizeof(*ohci->self_id_buffer));
+ ohci->self_id_buffer[pos] = self_id;
+ self_id_count++;
+ }
+ return self_id_count;
+}
+
+static void bus_reset_work(struct work_struct *work)
+{
+ struct fw_ohci *ohci =
+ container_of(work, struct fw_ohci, bus_reset_work);
int self_id_count, i, j, reg;
int generation, new_generation;
unsigned long flags;
@@ -1753,21 +1851,50 @@
* bit extra to get the actual number of self IDs.
*/
self_id_count = (reg >> 3) & 0xff;
- if (self_id_count == 0 || self_id_count > 252) {
+
+ if (self_id_count > 252) {
fw_notify("inconsistent self IDs\n");
return;
}
+
generation = (cond_le32_to_cpu(ohci->self_id_cpu[0]) >> 16) & 0xff;
rmb();
for (i = 1, j = 0; j < self_id_count; i += 2, j++) {
if (ohci->self_id_cpu[i] != ~ohci->self_id_cpu[i + 1]) {
- fw_notify("inconsistent self IDs\n");
- return;
+ /*
+ * If the invalid data looks like a cycle start packet,
+ * it's likely to be the result of the cycle master
+ * having a wrong gap count. In this case, the self IDs
+ * so far are valid and should be processed so that the
+ * bus manager can then correct the gap count.
+ */
+ if (cond_le32_to_cpu(ohci->self_id_cpu[i])
+ == 0xffff008f) {
+ fw_notify("ignoring spurious self IDs\n");
+ self_id_count = j;
+ break;
+ } else {
+ fw_notify("inconsistent self IDs\n");
+ return;
+ }
}
ohci->self_id_buffer[j] =
cond_le32_to_cpu(ohci->self_id_cpu[i]);
}
+
+ if (ohci->quirks & QUIRK_TI_SLLZ059) {
+ self_id_count = find_and_insert_self_id(ohci, self_id_count);
+ if (self_id_count < 0) {
+ fw_notify("could not construct local self ID\n");
+ return;
+ }
+ }
+
+ if (self_id_count == 0) {
+ fw_notify("inconsistent self IDs\n");
+ return;
+ }
rmb();
/*
@@ -1887,7 +2014,7 @@
log_irqs(event);
if (event & OHCI1394_selfIDComplete)
- tasklet_schedule(&ohci->bus_reset_tasklet);
+ queue_work(fw_workqueue, &ohci->bus_reset_work);
if (event & OHCI1394_RQPkt)
tasklet_schedule(&ohci->ar_request_ctx.tasklet);
@@ -1934,7 +2061,8 @@
reg_read(ohci, OHCI1394_PostedWriteAddressLo);
reg_write(ohci, OHCI1394_IntEventClear,
OHCI1394_postedWriteErr);
- fw_error("PCI posted write error\n");
+ if (printk_ratelimit())
+ fw_error("PCI posted write error\n");
}
if (unlikely(event & OHCI1394_cycleTooLong)) {
@@ -2048,6 +2176,28 @@
return 0;
}
+static int probe_tsb41ba3d(struct fw_ohci *ohci)
+{
+ /* TI vendor ID = 0x080028, TSB41BA3D product ID = 0x833005 (sic) */
+ static const u8 id[] = { 0x08, 0x00, 0x28, 0x83, 0x30, 0x05, };
+ int reg, i;
+
+ reg = read_phy_reg(ohci, 2);
+ if (reg < 0)
+ return reg;
+ if ((reg & PHY_EXTENDED_REGISTERS) != PHY_EXTENDED_REGISTERS)
+ return 0;
+
+ for (i = ARRAY_SIZE(id) - 1; i >= 0; i--) {
+ reg = read_paged_phy_reg(ohci, 1, i + 10);
+ if (reg < 0)
+ return reg;
+ if (reg != id[i])
+ return 0;
+ }
+ return 1;
+}
+
static int ohci_enable(struct fw_card *card,
const __be32 *config_rom, size_t length)
{
@@ -2085,6 +2235,16 @@
return -EIO;
}
+ if (ohci->quirks & QUIRK_TI_SLLZ059) {
+ ret = probe_tsb41ba3d(ohci);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ fw_notify("local TSB41BA3D phy\n");
+ else
+ ohci->quirks &= ~QUIRK_TI_SLLZ059;
+ }
+
reg_write(ohci, OHCI1394_HCControlClear,
OHCI1394_HCControl_noByteSwapData);
@@ -2260,7 +2420,7 @@
* then set up the real values for the two registers.
*
* We use ohci->lock to avoid racing with the code that sets
- * ohci->next_config_rom to NULL (see bus_reset_tasklet).
+ * ohci->next_config_rom to NULL (see bus_reset_work).
*/
next_config_rom =
@@ -2539,6 +2699,7 @@
struct iso_context *ctx =
container_of(context, struct iso_context, context);
struct descriptor *pd;
+ u32 buffer_dma;
__le32 *ir_header;
void *p;
@@ -2549,6 +2710,16 @@
/* Descriptor(s) not done yet, stop iteration */
return 0;
+ while (!(d->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))) {
+ d++;
+ buffer_dma = le32_to_cpu(d->data_address);
+ dma_sync_single_range_for_cpu(context->ohci->card.device,
+ buffer_dma & PAGE_MASK,
+ buffer_dma & ~PAGE_MASK,
+ le16_to_cpu(d->req_count),
+ DMA_FROM_DEVICE);
+ }
+
p = last + 1;
copy_iso_headers(ctx, p);
@@ -2571,11 +2742,19 @@
{
struct iso_context *ctx =
container_of(context, struct iso_context, context);
+ u32 buffer_dma;
if (!last->transfer_status)
/* Descriptor(s) not done yet, stop iteration */
return 0;
+ buffer_dma = le32_to_cpu(last->data_address);
+ dma_sync_single_range_for_cpu(context->ohci->card.device,
+ buffer_dma & PAGE_MASK,
+ buffer_dma & ~PAGE_MASK,
+ le16_to_cpu(last->req_count),
+ DMA_FROM_DEVICE);
+
if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS)
ctx->base.callback.mc(&ctx->base,
le32_to_cpu(last->data_address) +
@@ -2586,6 +2765,43 @@
return 1;
}
+static inline void sync_it_packet_for_cpu(struct context *context,
+ struct descriptor *pd)
+{
+ __le16 control;
+ u32 buffer_dma;
+
+ /* only packets beginning with OUTPUT_MORE* have data buffers */
+ if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
+ return;
+
+ /* skip over the OUTPUT_MORE_IMMEDIATE descriptor */
+ pd += 2;
+
+ /*
+ * If the packet has a header, the first OUTPUT_MORE/LAST descriptor's
+ * data buffer is in the context program's coherent page and must not
+ * be synced.
+ */
+ if ((le32_to_cpu(pd->data_address) & PAGE_MASK) ==
+ (context->current_bus & PAGE_MASK)) {
+ if (pd->control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS))
+ return;
+ pd++;
+ }
+
+ do {
+ buffer_dma = le32_to_cpu(pd->data_address);
+ dma_sync_single_range_for_cpu(context->ohci->card.device,
+ buffer_dma & PAGE_MASK,
+ buffer_dma & ~PAGE_MASK,
+ le16_to_cpu(pd->req_count),
+ DMA_TO_DEVICE);
+ control = pd->control;
+ pd++;
+ } while (!(control & cpu_to_le16(DESCRIPTOR_BRANCH_ALWAYS)));
+}
+
static int handle_it_packet(struct context *context,
struct descriptor *d,
struct descriptor *last)
@@ -2602,6 +2818,8 @@
/* Descriptor(s) not done yet, stop iteration */
return 0;
+ sync_it_packet_for_cpu(context, d);
+
i = ctx->header_length;
if (i + 4 < PAGE_SIZE) {
/* Present this value as big-endian to match the receive code */
@@ -2971,6 +3189,10 @@
page_bus = page_private(buffer->pages[page]);
pd[i].data_address = cpu_to_le32(page_bus + offset);
+ dma_sync_single_range_for_device(ctx->context.ohci->card.device,
+ page_bus, offset, length,
+ DMA_TO_DEVICE);
+
payload_index += length;
}
@@ -2995,6 +3217,7 @@
struct fw_iso_buffer *buffer,
unsigned long payload)
{
+ struct device *device = ctx->context.ohci->card.device;
struct descriptor *d, *pd;
dma_addr_t d_bus, page_bus;
u32 z, header_z, rest;
@@ -3049,6 +3272,10 @@
page_bus = page_private(buffer->pages[page]);
pd->data_address = cpu_to_le32(page_bus + offset);
+ dma_sync_single_range_for_device(device, page_bus,
+ offset, length,
+ DMA_FROM_DEVICE);
+
offset = (offset + length) & ~PAGE_MASK;
rest -= length;
if (offset == 0)
@@ -3108,6 +3335,10 @@
page_bus = page_private(buffer->pages[page]);
d->data_address = cpu_to_le32(page_bus + offset);
+ dma_sync_single_range_for_device(ctx->context.ohci->card.device,
+ page_bus, offset, length,
+ DMA_FROM_DEVICE);
+
rest -= length;
offset = 0;
page++;
@@ -3239,8 +3470,7 @@
spin_lock_init(&ohci->lock);
mutex_init(&ohci->phy_reg_mutex);
- tasklet_init(&ohci->bus_reset_tasklet,
- bus_reset_tasklet, (unsigned long)ohci);
+ INIT_WORK(&ohci->bus_reset_work, bus_reset_work);
err = pci_request_region(dev, 0, ohci_driver_name);
if (err) {
@@ -3382,6 +3612,7 @@
ohci = pci_get_drvdata(dev);
reg_write(ohci, OHCI1394_IntMaskClear, ~0);
flush_writes(ohci);
+ cancel_work_sync(&ohci->bus_reset_work);
fw_core_remove_card(&ohci->card);
/*
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 17cef86..68375bc 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -154,12 +154,16 @@
bool blocked;
};
+static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
+{
+ queue_delayed_work(fw_workqueue, &lu->work, delay);
+}
+
/*
* We create one struct sbp2_target per IEEE 1212 Unit Directory
* and one struct Scsi_Host per sbp2_target.
*/
struct sbp2_target {
- struct kref kref;
struct fw_unit *unit;
const char *bus_id;
struct list_head lu_list;
@@ -772,71 +776,6 @@
return scsilun_to_int(&eight_bytes_lun);
}
-static void sbp2_release_target(struct kref *kref)
-{
- struct sbp2_target *tgt = container_of(kref, struct sbp2_target, kref);
- struct sbp2_logical_unit *lu, *next;
- struct Scsi_Host *shost =
- container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
- struct scsi_device *sdev;
- struct fw_device *device = target_device(tgt);
-
- /* prevent deadlocks */
- sbp2_unblock(tgt);
-
- list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
- sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun));
- if (sdev) {
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- }
- if (lu->login_id != INVALID_LOGIN_ID) {
- int generation, node_id;
- /*
- * tgt->node_id may be obsolete here if we failed
- * during initial login or after a bus reset where
- * the topology changed.
- */
- generation = device->generation;
- smp_rmb(); /* node_id vs. generation */
- node_id = device->node_id;
- sbp2_send_management_orb(lu, node_id, generation,
- SBP2_LOGOUT_REQUEST,
- lu->login_id, NULL);
- }
- fw_core_remove_address_handler(&lu->address_handler);
- list_del(&lu->link);
- kfree(lu);
- }
- scsi_remove_host(shost);
- fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
-
- fw_unit_put(tgt->unit);
- scsi_host_put(shost);
- fw_device_put(device);
-}
-
-static void sbp2_target_get(struct sbp2_target *tgt)
-{
- kref_get(&tgt->kref);
-}
-
-static void sbp2_target_put(struct sbp2_target *tgt)
-{
- kref_put(&tgt->kref, sbp2_release_target);
-}
-
-/*
- * Always get the target's kref when scheduling work on one its units.
- * Each workqueue job is responsible to call sbp2_target_put() upon return.
- */
-static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
-{
- sbp2_target_get(lu->tgt);
- if (!queue_delayed_work(fw_workqueue, &lu->work, delay))
- sbp2_target_put(lu->tgt);
-}
-
/*
* Write retransmit retry values into the BUSY_TIMEOUT register.
* - The single-phase retry protocol is supported by all SBP-2 devices, but the
@@ -877,7 +816,7 @@
int generation, node_id, local_node_id;
if (fw_device_is_shutdown(device))
- goto out;
+ return;
generation = device->generation;
smp_rmb(); /* node IDs must not be older than generation */
@@ -899,7 +838,7 @@
/* Let any waiting I/O fail from now on. */
sbp2_unblock(lu->tgt);
}
- goto out;
+ return;
}
tgt->node_id = node_id;
@@ -925,7 +864,8 @@
if (lu->has_sdev) {
sbp2_cancel_orbs(lu);
sbp2_conditionally_unblock(lu);
- goto out;
+
+ return;
}
if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY)
@@ -957,7 +897,8 @@
lu->has_sdev = true;
scsi_device_put(sdev);
sbp2_allow_block(lu);
- goto out;
+
+ return;
out_logout_login:
smp_rmb(); /* generation may have changed */
@@ -971,8 +912,57 @@
* lu->work already. Reset the work from reconnect to login.
*/
PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
- out:
- sbp2_target_put(tgt);
+}
+
+static void sbp2_reconnect(struct work_struct *work)
+{
+ struct sbp2_logical_unit *lu =
+ container_of(work, struct sbp2_logical_unit, work.work);
+ struct sbp2_target *tgt = lu->tgt;
+ struct fw_device *device = target_device(tgt);
+ int generation, node_id, local_node_id;
+
+ if (fw_device_is_shutdown(device))
+ return;
+
+ generation = device->generation;
+ smp_rmb(); /* node IDs must not be older than generation */
+ node_id = device->node_id;
+ local_node_id = device->card->node_id;
+
+ if (sbp2_send_management_orb(lu, node_id, generation,
+ SBP2_RECONNECT_REQUEST,
+ lu->login_id, NULL) < 0) {
+ /*
+ * If reconnect was impossible even though we are in the
+ * current generation, fall back and try to log in again.
+ *
+ * We could check for "Function rejected" status, but
+ * looking at the bus generation as simpler and more general.
+ */
+ smp_rmb(); /* get current card generation */
+ if (generation == device->card->generation ||
+ lu->retries++ >= 5) {
+ fw_error("%s: failed to reconnect\n", tgt->bus_id);
+ lu->retries = 0;
+ PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
+ }
+ sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
+
+ return;
+ }
+
+ tgt->node_id = node_id;
+ tgt->address_high = local_node_id << 16;
+ smp_wmb(); /* node IDs must not be older than generation */
+ lu->generation = generation;
+
+ fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
+ tgt->bus_id, lu->lun, lu->retries);
+
+ sbp2_agent_reset(lu);
+ sbp2_cancel_orbs(lu);
+ sbp2_conditionally_unblock(lu);
}
static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry)
@@ -1120,6 +1110,7 @@
}
static struct scsi_host_template scsi_driver_template;
+static int sbp2_remove(struct device *dev);
static int sbp2_probe(struct device *dev)
{
@@ -1141,7 +1132,6 @@
tgt = (struct sbp2_target *)shost->hostdata;
dev_set_drvdata(&unit->device, tgt);
tgt->unit = unit;
- kref_init(&tgt->kref);
INIT_LIST_HEAD(&tgt->lu_list);
tgt->bus_id = dev_name(&unit->device);
tgt->guid = (u64)device->config_rom[3] << 32 | device->config_rom[4];
@@ -1154,9 +1144,6 @@
if (scsi_add_host(shost, &unit->device) < 0)
goto fail_shost_put;
- fw_device_get(device);
- fw_unit_get(unit);
-
/* implicit directory ID */
tgt->directory_id = ((unit->directory - device->config_rom) * 4
+ CSR_CONFIG_ROM) & 0xffffff;
@@ -1166,7 +1153,7 @@
if (sbp2_scan_unit_dir(tgt, unit->directory, &model,
&firmware_revision) < 0)
- goto fail_tgt_put;
+ goto fail_remove;
sbp2_clamp_management_orb_timeout(tgt);
sbp2_init_workarounds(tgt, model, firmware_revision);
@@ -1177,16 +1164,17 @@
* specifies the max payload size as 2 ^ (max_payload + 2), so
* if we set this to max_speed + 7, we get the right value.
*/
- tgt->max_payload = min(device->max_speed + 7, 10U);
- tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1);
+ tgt->max_payload = min3(device->max_speed + 7, 10U,
+ device->card->max_receive - 1);
/* Do the login in a workqueue so we can easily reschedule retries. */
list_for_each_entry(lu, &tgt->lu_list, link)
sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
+
return 0;
- fail_tgt_put:
- sbp2_target_put(tgt);
+ fail_remove:
+ sbp2_remove(dev);
return -ENOMEM;
fail_shost_put:
@@ -1194,71 +1182,6 @@
return -ENOMEM;
}
-static int sbp2_remove(struct device *dev)
-{
- struct fw_unit *unit = fw_unit(dev);
- struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
- struct sbp2_logical_unit *lu;
-
- list_for_each_entry(lu, &tgt->lu_list, link)
- cancel_delayed_work_sync(&lu->work);
-
- sbp2_target_put(tgt);
- return 0;
-}
-
-static void sbp2_reconnect(struct work_struct *work)
-{
- struct sbp2_logical_unit *lu =
- container_of(work, struct sbp2_logical_unit, work.work);
- struct sbp2_target *tgt = lu->tgt;
- struct fw_device *device = target_device(tgt);
- int generation, node_id, local_node_id;
-
- if (fw_device_is_shutdown(device))
- goto out;
-
- generation = device->generation;
- smp_rmb(); /* node IDs must not be older than generation */
- node_id = device->node_id;
- local_node_id = device->card->node_id;
-
- if (sbp2_send_management_orb(lu, node_id, generation,
- SBP2_RECONNECT_REQUEST,
- lu->login_id, NULL) < 0) {
- /*
- * If reconnect was impossible even though we are in the
- * current generation, fall back and try to log in again.
- *
- * We could check for "Function rejected" status, but
- * looking at the bus generation as simpler and more general.
- */
- smp_rmb(); /* get current card generation */
- if (generation == device->card->generation ||
- lu->retries++ >= 5) {
- fw_error("%s: failed to reconnect\n", tgt->bus_id);
- lu->retries = 0;
- PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
- }
- sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5));
- goto out;
- }
-
- tgt->node_id = node_id;
- tgt->address_high = local_node_id << 16;
- smp_wmb(); /* node IDs must not be older than generation */
- lu->generation = generation;
-
- fw_notify("%s: reconnected to LUN %04x (%d retries)\n",
- tgt->bus_id, lu->lun, lu->retries);
-
- sbp2_agent_reset(lu);
- sbp2_cancel_orbs(lu);
- sbp2_conditionally_unblock(lu);
- out:
- sbp2_target_put(tgt);
-}
-
static void sbp2_update(struct fw_unit *unit)
{
struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
@@ -1277,6 +1200,51 @@
}
}
+static int sbp2_remove(struct device *dev)
+{
+ struct fw_unit *unit = fw_unit(dev);
+ struct fw_device *device = fw_parent_device(unit);
+ struct sbp2_target *tgt = dev_get_drvdata(&unit->device);
+ struct sbp2_logical_unit *lu, *next;
+ struct Scsi_Host *shost =
+ container_of((void *)tgt, struct Scsi_Host, hostdata[0]);
+ struct scsi_device *sdev;
+
+ /* prevent deadlocks */
+ sbp2_unblock(tgt);
+
+ list_for_each_entry_safe(lu, next, &tgt->lu_list, link) {
+ cancel_delayed_work_sync(&lu->work);
+ sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun));
+ if (sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ }
+ if (lu->login_id != INVALID_LOGIN_ID) {
+ int generation, node_id;
+ /*
+ * tgt->node_id may be obsolete here if we failed
+ * during initial login or after a bus reset where
+ * the topology changed.
+ */
+ generation = device->generation;
+ smp_rmb(); /* node_id vs. generation */
+ node_id = device->node_id;
+ sbp2_send_management_orb(lu, node_id, generation,
+ SBP2_LOGOUT_REQUEST,
+ lu->login_id, NULL);
+ }
+ fw_core_remove_address_handler(&lu->address_handler);
+ list_del(&lu->link);
+ kfree(lu);
+ }
+ scsi_remove_host(shost);
+ fw_notify("released %s, target %d:0:0\n", tgt->bus_id, shost->host_no);
+
+ scsi_host_put(shost);
+ return 0;
+}
+
#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
#define SBP2_SW_VERSION_ENTRY 0x00010483
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index eb80b54..8370f72 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -490,8 +490,8 @@
return 0;
}
-static u64 efi_pstore_write(enum pstore_type_id type, unsigned int part,
- size_t size, struct pstore_info *psi)
+static int efi_pstore_write(enum pstore_type_id type, u64 *id,
+ unsigned int part, size_t size, struct pstore_info *psi)
{
char name[DUMP_NAME_LEN];
char stub_name[DUMP_NAME_LEN];
@@ -499,7 +499,7 @@
efi_guid_t vendor = LINUX_EFI_CRASH_GUID;
struct efivars *efivars = psi->data;
struct efivar_entry *entry, *found = NULL;
- int i;
+ int i, ret = 0;
sprintf(stub_name, "dump-type%u-%u-", type, part);
sprintf(name, "%s%lu", stub_name, get_seconds());
@@ -548,18 +548,19 @@
efivar_unregister(found);
if (size)
- efivar_create_sysfs_entry(efivars,
+ ret = efivar_create_sysfs_entry(efivars,
utf16_strsize(efi_name,
DUMP_NAME_LEN * 2),
efi_name, &vendor);
- return part;
+ *id = part;
+ return ret;
};
static int efi_pstore_erase(enum pstore_type_id type, u64 id,
struct pstore_info *psi)
{
- efi_pstore_write(type, id, 0, psi);
+ efi_pstore_write(type, &id, (unsigned int)id, 0, psi);
return 0;
}
@@ -580,8 +581,8 @@
return -1;
}
-static u64 efi_pstore_write(enum pstore_type_id type, unsigned int part,
- size_t size, struct pstore_info *psi)
+static int efi_pstore_write(enum pstore_type_id type, u64 *id,
+ unsigned int part, size_t size, struct pstore_info *psi)
{
return 0;
}
@@ -978,7 +979,7 @@
if (efivars->efi_pstore_info.buf) {
efivars->efi_pstore_info.bufsize = 1024;
efivars->efi_pstore_info.data = efivars;
- mutex_init(&efivars->efi_pstore_info.buf_mutex);
+ spin_lock_init(&efivars->efi_pstore_info.buf_lock);
pstore_register(&efivars->efi_pstore_info);
}
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index cb0bd07..8b3c745 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -189,7 +189,7 @@
config GPIO_VX855
tristate "VIA VX855/VX875 GPIO"
- depends on MFD_SUPPORT && PCI
+ depends on PCI
select MFD_CORE
select MFD_VX855
help
@@ -428,7 +428,6 @@
config GPIO_RDC321X
tristate "RDC R-321x GPIO support"
depends on PCI
- select MFD_SUPPORT
select MFD_CORE
select MFD_RDC321X
help
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 82f7b65..b81c989 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -32,6 +32,8 @@
#include <asm-generic/bug.h>
#include <asm/mach/irq.h>
+#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START)
+
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
@@ -343,6 +345,15 @@
mxc_gpio_hwtype = hwtype;
}
+static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+ struct bgpio_chip *bgc = to_bgpio_chip(gc);
+ struct mxc_gpio_port *port =
+ container_of(bgc, struct mxc_gpio_port, bgc);
+
+ return port->virtual_irq_start + offset;
+}
+
static int __devinit mxc_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -409,6 +420,7 @@
if (err)
goto out_iounmap;
+ port->bgc.gc.to_irq = mxc_gpio_to_irq;
port->bgc.gc.base = pdev->id * 32;
port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir);
port->bgc.data = port->bgc.read_reg(port->bgc.reg_set);
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index af55a85..292b504 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -49,6 +49,8 @@
#define GPIO_INT_LEV_MASK (1 << 0)
#define GPIO_INT_POL_MASK (1 << 1)
+#define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START)
+
struct mxs_gpio_port {
void __iomem *base;
int id;
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 9052925..ee13771 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -122,7 +122,7 @@
struct gpio_chip *c = &chips[i].chip;
sprintf(chips[i].label, "gpio-%d", i);
- chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+ chips[i].regbase = GPIO_BANK(i);
c->base = gpio;
c->label = chips[i].label;
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 6b65207..61044c8 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -20,10 +20,11 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
#include <asm/mach/irq.h>
@@ -35,9 +36,7 @@
#define GPIO_PORT(x) (((x) >> 3) & 0x3)
#define GPIO_BIT(x) ((x) & 0x7)
-#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \
- GPIO_BANK(x) * 0x80 + \
- GPIO_PORT(x) * 4)
+#define GPIO_REG(x) (GPIO_BANK(x) * 0x80 + GPIO_PORT(x) * 4)
#define GPIO_CNF(x) (GPIO_REG(x) + 0x00)
#define GPIO_OE(x) (GPIO_REG(x) + 0x10)
@@ -76,15 +75,18 @@
};
-static struct tegra_gpio_bank tegra_gpio_banks[] = {
- {.bank = 0, .irq = INT_GPIO1},
- {.bank = 1, .irq = INT_GPIO2},
- {.bank = 2, .irq = INT_GPIO3},
- {.bank = 3, .irq = INT_GPIO4},
- {.bank = 4, .irq = INT_GPIO5},
- {.bank = 5, .irq = INT_GPIO6},
- {.bank = 6, .irq = INT_GPIO7},
-};
+static void __iomem *regs;
+static struct tegra_gpio_bank tegra_gpio_banks[7];
+
+static inline void tegra_gpio_writel(u32 val, u32 reg)
+{
+ __raw_writel(val, regs + reg);
+}
+
+static inline u32 tegra_gpio_readl(u32 reg)
+{
+ return __raw_readl(regs + reg);
+}
static int tegra_gpio_compose(int bank, int port, int bit)
{
@@ -98,7 +100,7 @@
val = 0x100 << GPIO_BIT(gpio);
if (value)
val |= 1 << GPIO_BIT(gpio);
- __raw_writel(val, reg);
+ tegra_gpio_writel(val, reg);
}
void tegra_gpio_enable(int gpio)
@@ -118,7 +120,7 @@
static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
+ return (tegra_gpio_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1;
}
static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -155,7 +157,7 @@
{
int gpio = d->irq - INT_GPIO_BASE;
- __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
+ tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
}
static void tegra_gpio_irq_mask(struct irq_data *d)
@@ -208,10 +210,10 @@
spin_lock_irqsave(&bank->lvl_lock[port], flags);
- val = __raw_readl(GPIO_INT_LVL(gpio));
+ val = tegra_gpio_readl(GPIO_INT_LVL(gpio));
val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio));
val |= lvl_type << GPIO_BIT(gpio);
- __raw_writel(val, GPIO_INT_LVL(gpio));
+ tegra_gpio_writel(val, GPIO_INT_LVL(gpio));
spin_unlock_irqrestore(&bank->lvl_lock[port], flags);
@@ -237,12 +239,12 @@
for (port = 0; port < 4; port++) {
int gpio = tegra_gpio_compose(bank->bank, port, 0);
- unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) &
- __raw_readl(GPIO_INT_ENB(gpio));
- u32 lvl = __raw_readl(GPIO_INT_LVL(gpio));
+ unsigned long sta = tegra_gpio_readl(GPIO_INT_STA(gpio)) &
+ tegra_gpio_readl(GPIO_INT_ENB(gpio));
+ u32 lvl = tegra_gpio_readl(GPIO_INT_LVL(gpio));
for_each_set_bit(pin, &sta, 8) {
- __raw_writel(1 << pin, GPIO_INT_CLR(gpio));
+ tegra_gpio_writel(1 << pin, GPIO_INT_CLR(gpio));
/* if gpio is edge triggered, clear condition
* before executing the hander so that we don't
@@ -276,11 +278,11 @@
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
unsigned int gpio = (b<<5) | (p<<3);
- __raw_writel(bank->cnf[p], GPIO_CNF(gpio));
- __raw_writel(bank->out[p], GPIO_OUT(gpio));
- __raw_writel(bank->oe[p], GPIO_OE(gpio));
- __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
- __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
+ tegra_gpio_writel(bank->cnf[p], GPIO_CNF(gpio));
+ tegra_gpio_writel(bank->out[p], GPIO_OUT(gpio));
+ tegra_gpio_writel(bank->oe[p], GPIO_OE(gpio));
+ tegra_gpio_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio));
+ tegra_gpio_writel(bank->int_enb[p], GPIO_INT_ENB(gpio));
}
}
@@ -299,11 +301,11 @@
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
unsigned int gpio = (b<<5) | (p<<3);
- bank->cnf[p] = __raw_readl(GPIO_CNF(gpio));
- bank->out[p] = __raw_readl(GPIO_OUT(gpio));
- bank->oe[p] = __raw_readl(GPIO_OE(gpio));
- bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio));
- bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio));
+ bank->cnf[p] = tegra_gpio_readl(GPIO_CNF(gpio));
+ bank->out[p] = tegra_gpio_readl(GPIO_OUT(gpio));
+ bank->oe[p] = tegra_gpio_readl(GPIO_OE(gpio));
+ bank->int_enb[p] = tegra_gpio_readl(GPIO_INT_ENB(gpio));
+ bank->int_lvl[p] = tegra_gpio_readl(GPIO_INT_LVL(gpio));
}
}
local_irq_restore(flags);
@@ -333,28 +335,55 @@
*/
static struct lock_class_key gpio_lock_class;
-static int __init tegra_gpio_init(void)
+static int __devinit tegra_gpio_probe(struct platform_device *pdev)
{
+ struct resource *res;
struct tegra_gpio_bank *bank;
int gpio;
int i;
int j;
+ for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing IRQ resource\n");
+ return -ENODEV;
+ }
+
+ bank = &tegra_gpio_banks[i];
+ bank->bank = i;
+ bank->irq = res->start;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing MEM resource\n");
+ return -ENODEV;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res),
+ dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev, "Couldn't request MEM resource\n");
+ return -ENODEV;
+ }
+
+ regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!regs) {
+ dev_err(&pdev->dev, "Couldn't ioremap regs\n");
+ return -ENODEV;
+ }
+
for (i = 0; i < 7; i++) {
for (j = 0; j < 4; j++) {
int gpio = tegra_gpio_compose(i, j, 0);
- __raw_writel(0x00, GPIO_INT_ENB(gpio));
+ tegra_gpio_writel(0x00, GPIO_INT_ENB(gpio));
}
}
#ifdef CONFIG_OF_GPIO
- /*
- * This isn't ideal, but it gets things hooked up until this
- * driver is converted into a platform_device
- */
- tegra_gpio_chip.of_node = of_find_compatible_node(NULL, NULL,
- "nvidia,tegra20-gpio");
-#endif /* CONFIG_OF_GPIO */
+ tegra_gpio_chip.of_node = pdev->dev.of_node;
+#endif
gpiochip_add(&tegra_gpio_chip);
@@ -384,6 +413,24 @@
return 0;
}
+static struct of_device_id tegra_gpio_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-gpio", },
+ { },
+};
+
+static struct platform_driver tegra_gpio_driver = {
+ .driver = {
+ .name = "tegra-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_gpio_of_match,
+ },
+ .probe = tegra_gpio_probe,
+};
+
+static int __init tegra_gpio_init(void)
+{
+ return platform_driver_register(&tegra_gpio_driver);
+}
postcore_initcall(tegra_gpio_init);
void __init tegra_gpio_config(struct tegra_gpio_table *table, int num)
@@ -416,13 +463,13 @@
seq_printf(s,
"%d:%d %02x %02x %02x %02x %02x %02x %06x\n",
i, j,
- __raw_readl(GPIO_CNF(gpio)),
- __raw_readl(GPIO_OE(gpio)),
- __raw_readl(GPIO_OUT(gpio)),
- __raw_readl(GPIO_IN(gpio)),
- __raw_readl(GPIO_INT_STA(gpio)),
- __raw_readl(GPIO_INT_ENB(gpio)),
- __raw_readl(GPIO_INT_LVL(gpio)));
+ tegra_gpio_readl(GPIO_CNF(gpio)),
+ tegra_gpio_readl(GPIO_OE(gpio)),
+ tegra_gpio_readl(GPIO_OUT(gpio)),
+ tegra_gpio_readl(GPIO_IN(gpio)),
+ tegra_gpio_readl(GPIO_INT_STA(gpio)),
+ tegra_gpio_readl(GPIO_INT_ENB(gpio)),
+ tegra_gpio_readl(GPIO_INT_LVL(gpio)));
}
}
return 0;
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 9bc7b03..8cdb4b4 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -458,6 +458,9 @@
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_ISO_KEYBOARD },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+ APPLE_ISO_KEYBOARD },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
@@ -508,6 +511,12 @@
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 91adcc5..848a56c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1362,6 +1362,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_JIS) },
@@ -1374,6 +1377,7 @@
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
@@ -1942,6 +1946,9 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6_JIS) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 1680e99..06ce996 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -112,6 +112,9 @@
#define USB_DEVICE_ID_APPLE_ALU_REVB_ANSI 0x024f
#define USB_DEVICE_ID_APPLE_ALU_REVB_ISO 0x0250
#define USB_DEVICE_ID_APPLE_ALU_REVB_JIS 0x0251
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
+#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
@@ -121,6 +124,7 @@
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
+#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO 0x0256
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
#define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index fa5d7a1..f1c909f 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -291,7 +291,6 @@
td->last_slot_field = usage->hid;
td->last_field_index = field->index;
td->last_mt_collection = usage->collection_index;
- hdev->quirks &= ~HID_QUIRK_MULTITOUCH;
return 1;
case HID_DG_WIDTH:
hid_map_usage(hi, usage, bit, max,
@@ -530,44 +529,12 @@
}
}
-/* a list of devices for which there is a specialized multitouch driver */
-static const struct hid_device_id mt_have_special_driver[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, 0x0001) },
- { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, 0x0006) },
- { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
- USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
- { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA,
- USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
- { }
-};
-
-static bool mt_match_one_id(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- return id->bus == hdev->bus &&
- (id->vendor == HID_ANY_ID || id->vendor == hdev->vendor) &&
- (id->product == HID_ANY_ID || id->product == hdev->product);
-}
-
-static const struct hid_device_id *mt_match_id(struct hid_device *hdev,
- const struct hid_device_id *id)
-{
- for (; id->bus; id++)
- if (mt_match_one_id(hdev, id))
- return id;
-
- return NULL;
-}
-
static int mt_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret, i;
struct mt_device *td;
struct mt_class *mtclass = mt_classes; /* MT_CLS_DEFAULT */
- if (mt_match_id(hdev, mt_have_special_driver))
- return -ENODEV;
-
for (i = 0; mt_classes[i].name ; i++) {
if (id->driver_data == mt_classes[i].name) {
mtclass = &(mt_classes[i]);
@@ -575,6 +542,10 @@
}
}
+ /* This allows the driver to correctly support devices
+ * that emit events over several HID messages.
+ */
+ hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
td = kzalloc(sizeof(struct mt_device), GFP_KERNEL);
if (!td) {
@@ -590,16 +561,10 @@
if (ret != 0)
goto fail;
- hdev->quirks |= HID_QUIRK_MULTITOUCH;
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret)
goto fail;
- /* This allows the driver to correctly support devices
- * that emit events over several HID messages.
- */
- hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-
td->slots = kzalloc(td->maxcontacts * sizeof(struct mt_slot),
GFP_KERNEL);
if (!td->slots) {
@@ -793,10 +758,6 @@
HID_USB_DEVICE(USB_VENDOR_ID_XAT,
USB_DEVICE_ID_XAT_CSR) },
- /* Rest of the world */
- { .driver_data = MT_CLS_DEFAULT,
- HID_USB_DEVICE(HID_ANY_ID, HID_ANY_ID) },
-
{ }
};
MODULE_DEVICE_TABLE(hid, mt_devices);
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index 5666e75..56ce12c 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -162,27 +162,27 @@
device = devices[minor];
- mutex_lock(&device->readers_lock);
-
if (!device) {
pr_emerg("roccat device with minor %d doesn't exist\n", minor);
error = -ENODEV;
- goto exit_err;
+ goto exit_err_devices;
}
+ mutex_lock(&device->readers_lock);
+
if (!device->open++) {
/* power on device on adding first reader */
error = hid_hw_power(device->hid, PM_HINT_FULLON);
if (error < 0) {
--device->open;
- goto exit_err;
+ goto exit_err_readers;
}
error = hid_hw_open(device->hid);
if (error < 0) {
hid_hw_power(device->hid, PM_HINT_NORMAL);
--device->open;
- goto exit_err;
+ goto exit_err_readers;
}
}
@@ -193,13 +193,13 @@
list_add_tail(&reader->node, &device->readers);
file->private_data = reader;
-exit_unlock:
+exit_err_readers:
mutex_unlock(&device->readers_lock);
+exit_err_devices:
mutex_unlock(&devices_lock);
+ if (error)
+ kfree(reader);
return error;
-exit_err:
- kfree(reader);
- goto exit_unlock;
}
static int roccat_release(struct inode *inode, struct file *file)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 9b347ac..9ec854a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -335,6 +335,7 @@
config SENSORS_F71805F
tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
+ depends on !PPC
help
If you say yes here you get support for hardware monitoring
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
@@ -345,6 +346,7 @@
config SENSORS_F71882FG
tristate "Fintek F71882FG and compatibles"
+ depends on !PPC
help
If you say yes here you get support for hardware monitoring
features of many Fintek Super-I/O (LPC) chips. The currently
@@ -468,6 +470,7 @@
config SENSORS_IT87
tristate "ITE IT87xx and compatibles"
+ depends on !PPC
select HWMON_VID
help
If you say yes here you get support for ITE IT8705F, IT8712F,
@@ -824,6 +827,7 @@
config SENSORS_PC87360
tristate "National Semiconductor PC87360 family"
+ depends on !PPC
select HWMON_VID
help
If you say yes here you get access to the hardware monitoring
@@ -837,6 +841,7 @@
config SENSORS_PC87427
tristate "National Semiconductor PC87427"
+ depends on !PPC
help
If you say yes here you get access to the hardware monitoring
functions of the National Semiconductor PC87427 Super-I/O chip.
@@ -928,7 +933,7 @@
config SENSORS_DME1737
tristate "SMSC DME1737, SCH311x and compatibles"
- depends on I2C && EXPERIMENTAL
+ depends on I2C && EXPERIMENTAL && !PPC
select HWMON_VID
help
If you say yes here you get support for the hardware monitoring
@@ -970,6 +975,7 @@
config SENSORS_SMSC47M1
tristate "SMSC LPC47M10x and compatibles"
+ depends on !PPC
help
If you say yes here you get support for the integrated fan
monitoring and control capabilities of the SMSC LPC47B27x,
@@ -1003,7 +1009,7 @@
config SENSORS_SMSC47B397
tristate "SMSC LPC47B397-NC"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL && !PPC
help
If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.
@@ -1017,6 +1023,7 @@
config SENSORS_SCH5627
tristate "SMSC SCH5627"
+ depends on !PPC
select SENSORS_SCH56XX_COMMON
help
If you say yes here you get support for the hardware monitoring
@@ -1027,6 +1034,7 @@
config SENSORS_SCH5636
tristate "SMSC SCH5636"
+ depends on !PPC
select SENSORS_SCH56XX_COMMON
help
SMSC SCH5636 Super I/O chips include an embedded microcontroller for
@@ -1150,6 +1158,7 @@
config SENSORS_VT1211
tristate "VIA VT1211"
+ depends on !PPC
select HWMON_VID
help
If you say yes here then you get support for hardware monitoring
@@ -1262,6 +1271,7 @@
config SENSORS_W83627HF
tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
+ depends on !PPC
select HWMON_VID
help
If you say yes here you get support for the Winbond W836X7 series
@@ -1272,7 +1282,8 @@
will be called w83627hf.
config SENSORS_W83627EHF
- tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
+ tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
+ depends on !PPC
select HWMON_VID
help
If you say yes here you get support for the hardware
@@ -1281,7 +1292,8 @@
This driver also supports the W83627EHG, which is the lead-free
version of the W83627EHF, and the W83627DHG, which is a similar
chip suited for specific Intel processors that use PECI such as
- the Core 2 Duo.
+ the Core 2 Duo. And also the W83627UHG, which is a stripped down
+ version of the W83627DHG (as far as hardware monitoring goes.)
This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
(also known as W83667HG-I), and NCT6776F.
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index d46c0c7..df29a7f 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -58,10 +58,9 @@
static inline int ad7414_read(struct i2c_client *client, u8 reg)
{
- if (reg == AD7414_REG_TEMP) {
- int value = i2c_smbus_read_word_data(client, reg);
- return (value < 0) ? value : swab16(value);
- } else
+ if (reg == AD7414_REG_TEMP)
+ return i2c_smbus_read_word_swapped(client, reg);
+ else
return i2c_smbus_read_byte_data(client, reg);
}
diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c
index ffc781f..8cb718c 100644
--- a/drivers/hwmon/ad7418.c
+++ b/drivers/hwmon/ad7418.c
@@ -76,20 +76,6 @@
.id_table = ad7418_id,
};
-/* All registers are word-sized, except for the configuration registers.
- * AD7418 uses a high-byte first convention. Do NOT use those functions to
- * access the configuration registers CONF and CONF2, as they are byte-sized.
- */
-static inline int ad7418_read(struct i2c_client *client, u8 reg)
-{
- return swab16(i2c_smbus_read_word_data(client, reg));
-}
-
-static inline int ad7418_write(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static void ad7418_init_client(struct i2c_client *client)
{
struct ad7418_data *data = i2c_get_clientdata(client);
@@ -128,7 +114,9 @@
udelay(30);
for (i = 0; i < 3; i++) {
- data->temp[i] = ad7418_read(client, AD7418_REG_TEMP[i]);
+ data->temp[i] =
+ i2c_smbus_read_word_swapped(client,
+ AD7418_REG_TEMP[i]);
}
for (i = 0, ch = 4; i < data->adc_max; i++, ch--) {
@@ -138,11 +126,12 @@
udelay(15);
data->in[data->adc_max - 1 - i] =
- ad7418_read(client, AD7418_REG_ADC);
+ i2c_smbus_read_word_swapped(client,
+ AD7418_REG_ADC);
}
/* restore old configuration value */
- ad7418_write(client, AD7418_REG_CONF, cfg);
+ i2c_smbus_write_word_swapped(client, AD7418_REG_CONF, cfg);
data->last_updated = jiffies;
data->valid = 1;
@@ -182,7 +171,9 @@
mutex_lock(&data->lock);
data->temp[attr->index] = LM75_TEMP_TO_REG(temp);
- ad7418_write(client, AD7418_REG_TEMP[attr->index], data->temp[attr->index]);
+ i2c_smbus_write_word_swapped(client,
+ AD7418_REG_TEMP[attr->index],
+ data->temp[attr->index]);
mutex_unlock(&data->lock);
return count;
}
diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
index e9beeda..eedca3c 100644
--- a/drivers/hwmon/ads1015.c
+++ b/drivers/hwmon/ads1015.c
@@ -59,19 +59,6 @@
struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
};
-static s32 ads1015_read_reg(struct i2c_client *client, unsigned int reg)
-{
- s32 data = i2c_smbus_read_word_data(client, reg);
-
- return (data < 0) ? data : swab16(data);
-}
-
-static s32 ads1015_write_reg(struct i2c_client *client, unsigned int reg,
- u16 val)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(val));
-}
-
static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
int *value)
{
@@ -87,7 +74,7 @@
mutex_lock(&data->update_lock);
/* get channel parameters */
- res = ads1015_read_reg(client, ADS1015_CONFIG);
+ res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
if (res < 0)
goto err_unlock;
config = res;
@@ -101,13 +88,13 @@
config |= (pga & 0x0007) << 9;
config |= (data_rate & 0x0007) << 5;
- res = ads1015_write_reg(client, ADS1015_CONFIG, config);
+ res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config);
if (res < 0)
goto err_unlock;
/* wait until conversion finished */
msleep(conversion_time_ms);
- res = ads1015_read_reg(client, ADS1015_CONFIG);
+ res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
if (res < 0)
goto err_unlock;
config = res;
@@ -117,7 +104,7 @@
goto err_unlock;
}
- res = ads1015_read_reg(client, ADS1015_CONVERSION);
+ res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
if (res < 0)
goto err_unlock;
conversion = res;
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index c42c5a6..cfcc3b6 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -74,13 +74,6 @@
static int ads7828_probe(struct i2c_client *client,
const struct i2c_device_id *id);
-/* The ADS7828 returns the 12-bit sample in two bytes,
- these are read as a word then byte-swapped */
-static u16 ads7828_read_value(struct i2c_client *client, u8 reg)
-{
- return swab16(i2c_smbus_read_word_data(client, reg));
-}
-
static inline u8 channel_cmd_byte(int ch)
{
/* cmd byte C2,C1,C0 - see datasheet */
@@ -104,7 +97,8 @@
for (ch = 0; ch < ADS7828_NCH; ch++) {
u8 cmd = channel_cmd_byte(ch);
- data->adc_input[ch] = ads7828_read_value(client, cmd);
+ data->adc_input[ch] =
+ i2c_smbus_read_word_swapped(client, cmd);
}
data->last_updated = jiffies;
data->valid = 1;
@@ -203,7 +197,7 @@
for (ch = 0; ch < ADS7828_NCH; ch++) {
u16 in_data;
u8 cmd = channel_cmd_byte(ch);
- in_data = ads7828_read_value(client, cmd);
+ in_data = i2c_smbus_read_word_swapped(client, cmd);
if (in_data & 0xF000) {
pr_debug("%s : Doesn't look like an ads7828 device\n",
__func__);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index c02a052..d7bd1f3 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -829,17 +829,17 @@
/* convert from ISA to LM75 I2C addresses */
switch (reg & 0xff) {
case 0x50: /* TEMP */
- res = swab16(i2c_smbus_read_word_data(cl, 0));
+ res = i2c_smbus_read_word_swapped(cl, 0);
break;
case 0x52: /* CONFIG */
res = i2c_smbus_read_byte_data(cl, 1);
break;
case 0x53: /* HYST */
- res = swab16(i2c_smbus_read_word_data(cl, 2));
+ res = i2c_smbus_read_word_swapped(cl, 2);
break;
case 0x55: /* MAX */
default:
- res = swab16(i2c_smbus_read_word_data(cl, 3));
+ res = i2c_smbus_read_word_swapped(cl, 3);
break;
}
}
@@ -877,10 +877,10 @@
i2c_smbus_write_byte_data(cl, 1, value & 0xff);
break;
case 0x53: /* HYST */
- i2c_smbus_write_word_data(cl, 2, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 2, value);
break;
case 0x55: /* MAX */
- i2c_smbus_write_word_data(cl, 3, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 3, value);
break;
}
}
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index e113634..ef1ac996 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -80,24 +80,6 @@
u8 conf; /* Register encoding, combined */
};
-/* Temperature registers are word-sized.
- DS1621 uses a high-byte first convention, which is exactly opposite to
- the SMBus standard. */
-static int ds1621_read_temp(struct i2c_client *client, u8 reg)
-{
- int ret;
-
- ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- return swab16(ret);
-}
-
-static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static void ds1621_init_client(struct i2c_client *client)
{
u8 conf, new_conf;
@@ -136,7 +118,7 @@
data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
for (i = 0; i < ARRAY_SIZE(data->temp); i++)
- data->temp[i] = ds1621_read_temp(client,
+ data->temp[i] = i2c_smbus_read_word_swapped(client,
DS1621_REG_TEMP[i]);
/* reset alarms if necessary */
@@ -177,8 +159,8 @@
mutex_lock(&data->update_lock);
data->temp[attr->index] = val;
- ds1621_write_temp(client, DS1621_REG_TEMP[attr->index],
- data->temp[attr->index]);
+ i2c_smbus_write_word_swapped(client, DS1621_REG_TEMP[attr->index],
+ data->temp[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index 4f7c3fc..225ae4f 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -75,33 +75,13 @@
s16 temp[3]; /* Register values, word */
};
-/*
- * Temperature registers are word-sized.
- * DS620 uses a high-byte first convention, which is exactly opposite to
- * the SMBus standard.
- */
-static int ds620_read_temp(struct i2c_client *client, u8 reg)
-{
- int ret;
-
- ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- return swab16(ret);
-}
-
-static int ds620_write_temp(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static void ds620_init_client(struct i2c_client *client)
{
struct ds620_platform_data *ds620_info = client->dev.platform_data;
u16 conf, new_conf;
new_conf = conf =
- swab16(i2c_smbus_read_word_data(client, DS620_REG_CONF));
+ i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
/* switch to continuous conversion mode */
new_conf &= ~DS620_REG_CONFIG_1SHOT;
@@ -118,8 +98,7 @@
new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0;
if (conf != new_conf)
- i2c_smbus_write_word_data(client, DS620_REG_CONF,
- swab16(new_conf));
+ i2c_smbus_write_word_swapped(client, DS620_REG_CONF, new_conf);
/* start conversion */
i2c_smbus_write_byte(client, DS620_COM_START);
@@ -141,8 +120,8 @@
dev_dbg(&client->dev, "Starting ds620 update\n");
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
- res = ds620_read_temp(client,
- DS620_REG_TEMP[i]);
+ res = i2c_smbus_read_word_swapped(client,
+ DS620_REG_TEMP[i]);
if (res < 0) {
ret = ERR_PTR(res);
goto abort;
@@ -191,8 +170,8 @@
mutex_lock(&data->update_lock);
data->temp[attr->index] = val;
- ds620_write_temp(client, DS620_REG_TEMP[attr->index],
- data->temp[attr->index]);
+ i2c_smbus_write_word_swapped(client, DS620_REG_TEMP[attr->index],
+ data->temp[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -210,16 +189,15 @@
return PTR_ERR(data);
/* reset alarms if necessary */
- res = i2c_smbus_read_word_data(client, DS620_REG_CONF);
+ res = i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
if (res < 0)
return res;
- conf = swab16(res);
- new_conf = conf;
+ new_conf = conf = res;
new_conf &= ~attr->index;
if (conf != new_conf) {
- res = i2c_smbus_write_word_data(client, DS620_REG_CONF,
- swab16(new_conf));
+ res = i2c_smbus_write_word_swapped(client, DS620_REG_CONF,
+ new_conf);
if (res < 0)
return res;
}
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index e7ae574..a13e2da 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -591,7 +591,7 @@
static int gl518_read_value(struct i2c_client *client, u8 reg)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return swab16(i2c_smbus_read_word_data(client, reg));
+ return i2c_smbus_read_word_swapped(client, reg);
else
return i2c_smbus_read_byte_data(client, reg);
}
@@ -599,7 +599,7 @@
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
else
return i2c_smbus_write_byte_data(client, reg, value);
}
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 131ea86..cd6085b 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -821,7 +821,7 @@
static int gl520_read_value(struct i2c_client *client, u8 reg)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return swab16(i2c_smbus_read_word_data(client, reg));
+ return i2c_smbus_read_word_swapped(client, reg);
else
return i2c_smbus_read_byte_data(client, reg);
}
@@ -829,7 +829,7 @@
static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
else
return i2c_smbus_write_byte_data(client, reg, value);
}
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index 783d0c1..6a967d7 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -147,8 +147,9 @@
int id;
struct aem_ipmi_data ipmi;
- /* Function to update sensors */
+ /* Function and buffer to update sensors */
void (*update)(struct aem_data *data);
+ struct aem_read_sensor_resp *rs_resp;
/*
* AEM 1.x sensors:
@@ -245,8 +246,6 @@
static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
static void aem_remove_sensors(struct aem_data *data);
-static int aem_init_aem1(struct aem_ipmi_data *probe);
-static int aem_init_aem2(struct aem_ipmi_data *probe);
static int aem1_find_sensors(struct aem_data *data);
static int aem2_find_sensors(struct aem_data *data);
static void update_aem1_sensors(struct aem_data *data);
@@ -357,13 +356,14 @@
/* Sensor support functions */
-/* Read a sensor value */
+/* Read a sensor value; must be called with data->lock held */
static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
void *buf, size_t size)
{
int rs_size, res;
struct aem_read_sensor_req rs_req;
- struct aem_read_sensor_resp *rs_resp;
+ /* Use preallocated rx buffer */
+ struct aem_read_sensor_resp *rs_resp = data->rs_resp;
struct aem_ipmi_data *ipmi = &data->ipmi;
/* AEM registers are 1, 2, 4 or 8 bytes */
@@ -389,10 +389,6 @@
ipmi->tx_message.data_len = sizeof(rs_req);
rs_size = sizeof(*rs_resp) + size;
- rs_resp = kzalloc(rs_size, GFP_KERNEL);
- if (!rs_resp)
- return -ENOMEM;
-
ipmi->rx_msg_data = rs_resp;
ipmi->rx_msg_len = rs_size;
@@ -435,7 +431,6 @@
res = 0;
out:
- kfree(rs_resp);
return res;
}
@@ -493,6 +488,7 @@
{
list_del(&data->list);
aem_remove_sensors(data);
+ kfree(data->rs_resp);
hwmon_device_unregister(data->hwmon_dev);
ipmi_destroy_user(data->ipmi.user);
platform_set_drvdata(data->pdev, NULL);
@@ -570,24 +566,31 @@
platform_set_drvdata(data->pdev, data);
/* Set up IPMI interface */
- if (aem_init_ipmi_data(&data->ipmi, probe->interface,
- probe->bmc_device))
+ res = aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device);
+ if (res)
goto ipmi_err;
/* Register with hwmon */
data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
-
if (IS_ERR(data->hwmon_dev)) {
dev_err(&data->pdev->dev, "Unable to register hwmon "
"device for IPMI interface %d\n",
probe->interface);
+ res = PTR_ERR(data->hwmon_dev);
goto hwmon_reg_err;
}
data->update = update_aem1_sensors;
+ data->rs_resp = kzalloc(sizeof(*(data->rs_resp)) + 8, GFP_KERNEL);
+ if (!data->rs_resp) {
+ res = -ENOMEM;
+ goto alloc_resp_err;
+ }
/* Find sensors */
- if (aem1_find_sensors(data))
+ res = aem1_find_sensors(data);
+ if (res)
goto sensor_err;
/* Add to our list of AEM devices */
@@ -599,6 +602,8 @@
return 0;
sensor_err:
+ kfree(data->rs_resp);
+alloc_resp_err:
hwmon_device_unregister(data->hwmon_dev);
hwmon_reg_err:
ipmi_destroy_user(data->ipmi.user);
@@ -614,7 +619,7 @@
}
/* Find and initialize all AEM1 instances */
-static int aem_init_aem1(struct aem_ipmi_data *probe)
+static void aem_init_aem1(struct aem_ipmi_data *probe)
{
int num, i, err;
@@ -625,11 +630,8 @@
dev_err(probe->bmc_device,
"Error %d initializing AEM1 0x%X\n",
err, i);
- return err;
}
}
-
- return 0;
}
/* Probe functions for AEM2 devices */
@@ -704,24 +706,31 @@
platform_set_drvdata(data->pdev, data);
/* Set up IPMI interface */
- if (aem_init_ipmi_data(&data->ipmi, probe->interface,
- probe->bmc_device))
+ res = aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device);
+ if (res)
goto ipmi_err;
/* Register with hwmon */
data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
-
if (IS_ERR(data->hwmon_dev)) {
dev_err(&data->pdev->dev, "Unable to register hwmon "
"device for IPMI interface %d\n",
probe->interface);
+ res = PTR_ERR(data->hwmon_dev);
goto hwmon_reg_err;
}
data->update = update_aem2_sensors;
+ data->rs_resp = kzalloc(sizeof(*(data->rs_resp)) + 8, GFP_KERNEL);
+ if (!data->rs_resp) {
+ res = -ENOMEM;
+ goto alloc_resp_err;
+ }
/* Find sensors */
- if (aem2_find_sensors(data))
+ res = aem2_find_sensors(data);
+ if (res)
goto sensor_err;
/* Add to our list of AEM devices */
@@ -733,6 +742,8 @@
return 0;
sensor_err:
+ kfree(data->rs_resp);
+alloc_resp_err:
hwmon_device_unregister(data->hwmon_dev);
hwmon_reg_err:
ipmi_destroy_user(data->ipmi.user);
@@ -748,7 +759,7 @@
}
/* Find and initialize all AEM2 instances */
-static int aem_init_aem2(struct aem_ipmi_data *probe)
+static void aem_init_aem2(struct aem_ipmi_data *probe)
{
struct aem_find_instance_resp fi_resp;
int err;
@@ -767,12 +778,9 @@
dev_err(probe->bmc_device,
"Error %d initializing AEM2 0x%X\n",
err, fi_resp.module_handle);
- return err;
}
i++;
}
-
- return 0;
}
/* Probe a BMC for AEM firmware instances */
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 02cebb7..2d3d728 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -154,8 +154,6 @@
const struct i2c_device_id *id);
static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info);
static int jc42_remove(struct i2c_client *client);
-static int jc42_read_value(struct i2c_client *client, u8 reg);
-static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct jc42_data *jc42_update_device(struct device *dev);
@@ -187,7 +185,7 @@
struct jc42_data *data = i2c_get_clientdata(client);
data->config |= JC42_CFG_SHUTDOWN;
- jc42_write_value(client, JC42_REG_CONFIG, data->config);
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, data->config);
return 0;
}
@@ -197,7 +195,7 @@
struct jc42_data *data = i2c_get_clientdata(client);
data->config &= ~JC42_CFG_SHUTDOWN;
- jc42_write_value(client, JC42_REG_CONFIG, data->config);
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, data->config);
return 0;
}
@@ -315,7 +313,7 @@
return -EINVAL; \
mutex_lock(&data->update_lock); \
data->value = jc42_temp_to_reg(val, data->extended); \
- err = jc42_write_value(client, reg, data->value); \
+ err = i2c_smbus_write_word_swapped(client, reg, data->value); \
if (err < 0) \
ret = err; \
mutex_unlock(&data->update_lock); \
@@ -357,7 +355,8 @@
data->config = (data->config
& ~(JC42_CFG_HYST_MASK << JC42_CFG_HYST_SHIFT))
| (hyst << JC42_CFG_HYST_SHIFT);
- err = jc42_write_value(client, JC42_REG_CONFIG, data->config);
+ err = i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG,
+ data->config);
if (err < 0)
ret = err;
mutex_unlock(&data->update_lock);
@@ -452,10 +451,10 @@
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
- cap = jc42_read_value(new_client, JC42_REG_CAP);
- config = jc42_read_value(new_client, JC42_REG_CONFIG);
- manid = jc42_read_value(new_client, JC42_REG_MANID);
- devid = jc42_read_value(new_client, JC42_REG_DEVICEID);
+ cap = i2c_smbus_read_word_swapped(new_client, JC42_REG_CAP);
+ config = i2c_smbus_read_word_swapped(new_client, JC42_REG_CONFIG);
+ manid = i2c_smbus_read_word_swapped(new_client, JC42_REG_MANID);
+ devid = i2c_smbus_read_word_swapped(new_client, JC42_REG_DEVICEID);
if (cap < 0 || config < 0 || manid < 0 || devid < 0)
return -ENODEV;
@@ -489,14 +488,14 @@
i2c_set_clientdata(new_client, data);
mutex_init(&data->update_lock);
- cap = jc42_read_value(new_client, JC42_REG_CAP);
+ cap = i2c_smbus_read_word_swapped(new_client, JC42_REG_CAP);
if (cap < 0) {
err = -EINVAL;
goto exit_free;
}
data->extended = !!(cap & JC42_CAP_RANGE);
- config = jc42_read_value(new_client, JC42_REG_CONFIG);
+ config = i2c_smbus_read_word_swapped(new_client, JC42_REG_CONFIG);
if (config < 0) {
err = -EINVAL;
goto exit_free;
@@ -504,7 +503,8 @@
data->orig_config = config;
if (config & JC42_CFG_SHUTDOWN) {
config &= ~JC42_CFG_SHUTDOWN;
- jc42_write_value(new_client, JC42_REG_CONFIG, config);
+ i2c_smbus_write_word_swapped(new_client, JC42_REG_CONFIG,
+ config);
}
data->config = config;
@@ -535,25 +535,12 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &jc42_group);
if (data->config != data->orig_config)
- jc42_write_value(client, JC42_REG_CONFIG, data->orig_config);
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG,
+ data->orig_config);
kfree(data);
return 0;
}
-/* All registers are word-sized. */
-static int jc42_read_value(struct i2c_client *client, u8 reg)
-{
- int ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- return swab16(ret);
-}
-
-static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static struct jc42_data *jc42_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -564,28 +551,29 @@
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
- val = jc42_read_value(client, JC42_REG_TEMP);
+ val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
}
data->temp_input = val;
- val = jc42_read_value(client, JC42_REG_TEMP_CRITICAL);
+ val = i2c_smbus_read_word_swapped(client,
+ JC42_REG_TEMP_CRITICAL);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
}
data->temp_crit = val;
- val = jc42_read_value(client, JC42_REG_TEMP_LOWER);
+ val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_LOWER);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
}
data->temp_min = val;
- val = jc42_read_value(client, JC42_REG_TEMP_UPPER);
+ val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_UPPER);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 29b9030..9e64d96 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -34,7 +34,7 @@
#define LM73_REG_CTRL 0x04
#define LM73_REG_ID 0x07
-#define LM73_ID 0x9001 /* or 0x190 after a swab16() */
+#define LM73_ID 0x9001 /* 0x0190, byte-swapped */
#define DRVNAME "lm73"
#define LM73_TEMP_MIN (-40)
#define LM73_TEMP_MAX 150
@@ -57,7 +57,7 @@
/* Write value */
value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
(LM73_TEMP_MAX*4)) << 5;
- i2c_smbus_write_word_data(client, attr->index, swab16(value));
+ i2c_smbus_write_word_swapped(client, attr->index, value);
return count;
}
@@ -68,8 +68,8 @@
struct i2c_client *client = to_i2c_client(dev);
/* use integer division instead of equivalent right shift to
guarantee arithmetic shift and preserve the sign */
- int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
- attr->index)))*250) / 32;
+ int temp = ((s16) (i2c_smbus_read_word_swapped(client,
+ attr->index))*250) / 32;
return sprintf(buf, "%d\n", temp);
}
@@ -150,17 +150,31 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
- u16 id;
- u8 ctrl;
+ int id, ctrl, conf;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
+ /*
+ * Do as much detection as possible with byte reads first, as word
+ * reads can confuse other devices.
+ */
+ ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
+ if (ctrl < 0 || (ctrl & 0x10))
+ return -ENODEV;
+
+ conf = i2c_smbus_read_byte_data(new_client, LM73_REG_CONF);
+ if (conf < 0 || (conf & 0x0c))
+ return -ENODEV;
+
+ id = i2c_smbus_read_byte_data(new_client, LM73_REG_ID);
+ if (id < 0 || id != (LM73_ID & 0xff))
+ return -ENODEV;
+
/* Check device ID */
id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
- ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
- if ((id != LM73_ID) || (ctrl & 0x10))
+ if (id < 0 || id != LM73_ID)
return -ENODEV;
strlcpy(info->type, "lm73", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 90126a2..1888dd0 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -384,13 +384,10 @@
*/
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
- int value;
-
if (reg == LM75_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
-
- value = i2c_smbus_read_word_data(client, reg);
- return (value < 0) ? value : swab16(value);
+ else
+ return i2c_smbus_read_word_swapped(client, reg);
}
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -398,7 +395,7 @@
if (reg == LM75_REG_CONF)
return i2c_smbus_write_byte_data(client, reg, value);
else
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
}
static struct lm75_data *lm75_update_device(struct device *dev)
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index b28a297..8dfc678 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -365,7 +365,7 @@
if (reg == LM77_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
else
- return swab16(i2c_smbus_read_word_data(client, reg));
+ return i2c_smbus_read_word_swapped(client, reg);
}
static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -373,7 +373,7 @@
if (reg == LM77_REG_CONF)
return i2c_smbus_write_byte_data(client, reg, value);
else
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
}
static void lm77_init_client(struct i2c_client *client)
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 90ddb87..615bc4f 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1105,41 +1105,37 @@
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm90_detect(struct i2c_client *new_client,
+static int lm90_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
- struct i2c_adapter *adapter = new_client->adapter;
- int address = new_client->addr;
+ struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
const char *name = NULL;
- int man_id, chip_id, reg_config1, reg_config2, reg_convrate;
+ int man_id, chip_id, config1, config2, convrate;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* detection and identification */
- if ((man_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_MAN_ID)) < 0
- || (chip_id = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CHIP_ID)) < 0
- || (reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG1)) < 0
- || (reg_convrate = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONVRATE)) < 0)
+ man_id = i2c_smbus_read_byte_data(client, LM90_REG_R_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, LM90_REG_R_CHIP_ID);
+ config1 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1);
+ convrate = i2c_smbus_read_byte_data(client, LM90_REG_R_CONVRATE);
+ if (man_id < 0 || chip_id < 0 || config1 < 0 || convrate < 0)
return -ENODEV;
if (man_id == 0x01 || man_id == 0x5C || man_id == 0x41) {
- reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG2);
- if (reg_config2 < 0)
+ config2 = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG2);
+ if (config2 < 0)
return -ENODEV;
} else
- reg_config2 = 0; /* Make compiler happy */
+ config2 = 0; /* Make compiler happy */
if ((address == 0x4C || address == 0x4D)
&& man_id == 0x01) { /* National Semiconductor */
- if ((reg_config1 & 0x2A) == 0x00
- && (reg_config2 & 0xF8) == 0x00
- && reg_convrate <= 0x09) {
+ if ((config1 & 0x2A) == 0x00
+ && (config2 & 0xF8) == 0x00
+ && convrate <= 0x09) {
if (address == 0x4C
&& (chip_id & 0xF0) == 0x20) { /* LM90 */
name = "lm90";
@@ -1163,8 +1159,8 @@
if ((address == 0x4C || address == 0x4D)
&& man_id == 0x41) { /* Analog Devices */
if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
- && (reg_config1 & 0x3F) == 0x00
- && reg_convrate <= 0x0A) {
+ && (config1 & 0x3F) == 0x00
+ && convrate <= 0x0A) {
name = "adm1032";
/* The ADM1032 supports PEC, but only if combined
transactions are not used. */
@@ -1173,18 +1169,18 @@
info->flags |= I2C_CLIENT_PEC;
} else
if (chip_id == 0x51 /* ADT7461 */
- && (reg_config1 & 0x1B) == 0x00
- && reg_convrate <= 0x0A) {
+ && (config1 & 0x1B) == 0x00
+ && convrate <= 0x0A) {
name = "adt7461";
} else
if (chip_id == 0x57 /* ADT7461A, NCT1008 */
- && (reg_config1 & 0x1B) == 0x00
- && reg_convrate <= 0x0A) {
+ && (config1 & 0x1B) == 0x00
+ && convrate <= 0x0A) {
name = "adt7461a";
}
} else
if (man_id == 0x4D) { /* Maxim */
- int reg_emerg, reg_emerg2, reg_status2;
+ int emerg, emerg2, status2;
/*
* We read MAX6659_REG_R_REMOTE_EMERG twice, and re-read
@@ -1192,13 +1188,15 @@
* exists, both readings will reflect the same value. Otherwise,
* the readings will be different.
*/
- if ((reg_emerg = i2c_smbus_read_byte_data(new_client,
- MAX6659_REG_R_REMOTE_EMERG)) < 0
- || i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID) < 0
- || (reg_emerg2 = i2c_smbus_read_byte_data(new_client,
- MAX6659_REG_R_REMOTE_EMERG)) < 0
- || (reg_status2 = i2c_smbus_read_byte_data(new_client,
- MAX6696_REG_R_STATUS2)) < 0)
+ emerg = i2c_smbus_read_byte_data(client,
+ MAX6659_REG_R_REMOTE_EMERG);
+ man_id = i2c_smbus_read_byte_data(client,
+ LM90_REG_R_MAN_ID);
+ emerg2 = i2c_smbus_read_byte_data(client,
+ MAX6659_REG_R_REMOTE_EMERG);
+ status2 = i2c_smbus_read_byte_data(client,
+ MAX6696_REG_R_STATUS2);
+ if (emerg < 0 || man_id < 0 || emerg2 < 0 || status2 < 0)
return -ENODEV;
/*
@@ -1216,8 +1214,8 @@
*/
if (chip_id == man_id
&& (address == 0x4C || address == 0x4D || address == 0x4E)
- && (reg_config1 & 0x1F) == (man_id & 0x0F)
- && reg_convrate <= 0x09) {
+ && (config1 & 0x1F) == (man_id & 0x0F)
+ && convrate <= 0x09) {
if (address == 0x4C)
name = "max6657";
else
@@ -1235,10 +1233,10 @@
* one of those registers exists.
*/
if (chip_id == 0x01
- && (reg_config1 & 0x10) == 0x00
- && (reg_status2 & 0x01) == 0x00
- && reg_emerg == reg_emerg2
- && reg_convrate <= 0x07) {
+ && (config1 & 0x10) == 0x00
+ && (status2 & 0x01) == 0x00
+ && emerg == emerg2
+ && convrate <= 0x07) {
name = "max6696";
} else
/*
@@ -1248,8 +1246,8 @@
* second to last bit of config1 (software reset).
*/
if (chip_id == 0x01
- && (reg_config1 & 0x03) == 0x00
- && reg_convrate <= 0x07) {
+ && (config1 & 0x03) == 0x00
+ && convrate <= 0x07) {
name = "max6680";
} else
/*
@@ -1258,21 +1256,21 @@
* register are unused and should return zero when read.
*/
if (chip_id == 0x59
- && (reg_config1 & 0x3f) == 0x00
- && reg_convrate <= 0x07) {
+ && (config1 & 0x3f) == 0x00
+ && convrate <= 0x07) {
name = "max6646";
}
} else
if (address == 0x4C
&& man_id == 0x5C) { /* Winbond/Nuvoton */
- if ((reg_config1 & 0x2A) == 0x00
- && (reg_config2 & 0xF8) == 0x00) {
+ if ((config1 & 0x2A) == 0x00
+ && (config2 & 0xF8) == 0x00) {
if (chip_id == 0x01 /* W83L771W/G */
- && reg_convrate <= 0x09) {
+ && convrate <= 0x09) {
name = "w83l771";
} else
if ((chip_id & 0xFE) == 0x10 /* W83L771AWG/ASG */
- && reg_convrate <= 0x08) {
+ && convrate <= 0x08) {
name = "w83l771";
}
}
@@ -1280,9 +1278,9 @@
if (address >= 0x48 && address <= 0x4F
&& man_id == 0xA1) { /* NXP Semiconductor/Philips */
if (chip_id == 0x00
- && (reg_config1 & 0x2A) == 0x00
- && (reg_config2 & 0xFE) == 0x00
- && reg_convrate <= 0x09) {
+ && (config1 & 0x2A) == 0x00
+ && (config2 & 0xFE) == 0x00
+ && convrate <= 0x09) {
name = "sa56004";
}
}
@@ -1301,19 +1299,18 @@
static void lm90_remove_files(struct i2c_client *client, struct lm90_data *data)
{
+ struct device *dev = &client->dev;
+
if (data->flags & LM90_HAVE_TEMP3)
- sysfs_remove_group(&client->dev.kobj, &lm90_temp3_group);
+ sysfs_remove_group(&dev->kobj, &lm90_temp3_group);
if (data->flags & LM90_HAVE_EMERGENCY_ALARM)
- sysfs_remove_group(&client->dev.kobj,
- &lm90_emergency_alarm_group);
+ sysfs_remove_group(&dev->kobj, &lm90_emergency_alarm_group);
if (data->flags & LM90_HAVE_EMERGENCY)
- sysfs_remove_group(&client->dev.kobj,
- &lm90_emergency_group);
+ sysfs_remove_group(&dev->kobj, &lm90_emergency_group);
if (data->flags & LM90_HAVE_OFFSET)
- device_remove_file(&client->dev,
- &sensor_dev_attr_temp2_offset.dev_attr);
- device_remove_file(&client->dev, &dev_attr_pec);
- sysfs_remove_group(&client->dev.kobj, &lm90_group);
+ device_remove_file(dev, &sensor_dev_attr_temp2_offset.dev_attr);
+ device_remove_file(dev, &dev_attr_pec);
+ sysfs_remove_group(&dev->kobj, &lm90_group);
}
static void lm90_init_client(struct i2c_client *client)
@@ -1362,10 +1359,11 @@
i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
}
-static int lm90_probe(struct i2c_client *new_client,
+static int lm90_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- struct i2c_adapter *adapter = to_i2c_adapter(new_client->dev.parent);
+ struct device *dev = &client->dev;
+ struct i2c_adapter *adapter = to_i2c_adapter(dev->parent);
struct lm90_data *data;
int err;
@@ -1374,14 +1372,14 @@
err = -ENOMEM;
goto exit;
}
- i2c_set_clientdata(new_client, data);
+ i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
/* Set the device type */
data->kind = id->driver_data;
if (data->kind == adm1032) {
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
- new_client->flags &= ~I2C_CLIENT_PEC;
+ client->flags &= ~I2C_CLIENT_PEC;
}
/* Different devices have different alarm bits triggering the
@@ -1396,43 +1394,41 @@
data->max_convrate = lm90_params[data->kind].max_convrate;
/* Initialize the LM90 chip */
- lm90_init_client(new_client);
+ lm90_init_client(client);
/* Register sysfs hooks */
- err = sysfs_create_group(&new_client->dev.kobj, &lm90_group);
+ err = sysfs_create_group(&dev->kobj, &lm90_group);
if (err)
goto exit_free;
- if (new_client->flags & I2C_CLIENT_PEC) {
- err = device_create_file(&new_client->dev, &dev_attr_pec);
+ if (client->flags & I2C_CLIENT_PEC) {
+ err = device_create_file(dev, &dev_attr_pec);
if (err)
goto exit_remove_files;
}
if (data->flags & LM90_HAVE_OFFSET) {
- err = device_create_file(&new_client->dev,
+ err = device_create_file(dev,
&sensor_dev_attr_temp2_offset.dev_attr);
if (err)
goto exit_remove_files;
}
if (data->flags & LM90_HAVE_EMERGENCY) {
- err = sysfs_create_group(&new_client->dev.kobj,
- &lm90_emergency_group);
+ err = sysfs_create_group(&dev->kobj, &lm90_emergency_group);
if (err)
goto exit_remove_files;
}
if (data->flags & LM90_HAVE_EMERGENCY_ALARM) {
- err = sysfs_create_group(&new_client->dev.kobj,
+ err = sysfs_create_group(&dev->kobj,
&lm90_emergency_alarm_group);
if (err)
goto exit_remove_files;
}
if (data->flags & LM90_HAVE_TEMP3) {
- err = sysfs_create_group(&new_client->dev.kobj,
- &lm90_temp3_group);
+ err = sysfs_create_group(&dev->kobj, &lm90_temp3_group);
if (err)
goto exit_remove_files;
}
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
+ data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
@@ -1441,7 +1437,7 @@
return 0;
exit_remove_files:
- lm90_remove_files(new_client, data);
+ lm90_remove_files(client, data);
exit_free:
kfree(data);
exit:
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 7c31e62..8fcbd4d4 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -117,16 +117,16 @@
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
dev_dbg(&client->dev, "Updating lm92 data\n");
- data->temp1_input = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP));
- data->temp1_hyst = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_HYST));
- data->temp1_crit = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_CRIT));
- data->temp1_min = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_LOW));
- data->temp1_max = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_HIGH));
+ data->temp1_input = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP);
+ data->temp1_hyst = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_HYST);
+ data->temp1_crit = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_CRIT);
+ data->temp1_min = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_LOW);
+ data->temp1_max = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_HIGH);
data->last_updated = jiffies;
data->valid = 1;
@@ -158,7 +158,7 @@
\
mutex_lock(&data->update_lock); \
data->value = TEMP_TO_REG(val); \
- i2c_smbus_write_word_data(client, reg, swab16(data->value)); \
+ i2c_smbus_write_word_swapped(client, reg, data->value); \
mutex_unlock(&data->update_lock); \
return count; \
}
@@ -194,8 +194,8 @@
mutex_lock(&data->update_lock);
data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val;
- i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST,
- swab16(TEMP_TO_REG(data->temp1_hyst)));
+ i2c_smbus_write_word_swapped(client, LM92_REG_TEMP_HYST,
+ TEMP_TO_REG(data->temp1_hyst));
mutex_unlock(&data->update_lock);
return count;
}
diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c
index dd2d7b9..385886a 100644
--- a/drivers/hwmon/max16065.c
+++ b/drivers/hwmon/max16065.c
@@ -137,10 +137,10 @@
{
int rv;
- rv = i2c_smbus_read_word_data(client, reg);
+ rv = i2c_smbus_read_word_swapped(client, reg);
if (unlikely(rv < 0))
return rv;
- return ((rv & 0xff) << 2) | ((rv >> 14) & 0x03);
+ return rv >> 6;
}
static struct max16065_data *max16065_update_device(struct device *dev)
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
index d5226c9..ef65ab5 100644
--- a/drivers/hwmon/mc13783-adc.c
+++ b/drivers/hwmon/mc13783-adc.c
@@ -31,7 +31,7 @@
#define MC13783_ADC_NAME "mc13783-adc"
struct mc13783_adc_priv {
- struct mc13783 *mc13783;
+ struct mc13xxx *mc13xxx;
struct device *hwmon_dev;
};
@@ -51,8 +51,8 @@
unsigned int sample[4];
int ret;
- ret = mc13783_adc_do_conversion(priv->mc13783,
- MC13783_ADC_MODE_MULT_CHAN,
+ ret = mc13xxx_adc_do_conversion(priv->mc13xxx,
+ MC13XXX_ADC_MODE_MULT_CHAN,
channel, sample);
if (ret)
return ret;
@@ -147,9 +147,9 @@
static int mc13783_adc_use_touchscreen(struct platform_device *pdev)
{
struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
- unsigned flags = mc13783_get_flags(priv->mc13783);
+ unsigned flags = mc13xxx_get_flags(priv->mc13xxx);
- return flags & MC13783_USE_TOUCHSCREEN;
+ return flags & MC13XXX_USE_TOUCHSCREEN;
}
static int __init mc13783_adc_probe(struct platform_device *pdev)
@@ -161,7 +161,7 @@
if (!priv)
return -ENOMEM;
- priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+ priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
platform_set_drvdata(pdev, priv);
diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
index 1c8c981..1539878 100644
--- a/drivers/hwmon/sht21.c
+++ b/drivers/hwmon/sht21.c
@@ -83,25 +83,6 @@
}
/**
- * sht21_read_word_data() - read word from register
- * @client: I2C client device
- * @reg: I2C command byte
- *
- * Returns value, negative errno on error.
- */
-static inline int sht21_read_word_data(struct i2c_client *client, u8 reg)
-{
- int ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- /*
- * SMBus specifies low byte first, but the SHT21 returns MSB
- * first, so we have to swab16 the values
- */
- return swab16(ret);
-}
-
-/**
* sht21_update_measurements() - get updated measurements from device
* @client: I2C client device
*
@@ -119,12 +100,13 @@
* maximum two measurements per second at 12bit accuracy shall be made.
*/
if (time_after(jiffies, sht21->last_update + HZ / 2) || !sht21->valid) {
- ret = sht21_read_word_data(client, SHT21_TRIG_T_MEASUREMENT_HM);
+ ret = i2c_smbus_read_word_swapped(client,
+ SHT21_TRIG_T_MEASUREMENT_HM);
if (ret < 0)
goto out;
sht21->temperature = sht21_temp_ticks_to_millicelsius(ret);
- ret = sht21_read_word_data(client,
- SHT21_TRIG_RH_MEASUREMENT_HM);
+ ret = i2c_smbus_read_word_swapped(client,
+ SHT21_TRIG_RH_MEASUREMENT_HM);
if (ret < 0)
goto out;
sht21->humidity = sht21_rh_ticks_to_per_cent_mille(ret);
diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c
index 425df5b..4116381 100644
--- a/drivers/hwmon/smm665.c
+++ b/drivers/hwmon/smm665.c
@@ -214,33 +214,26 @@
*
* Neither i2c_smbus_read_byte() nor
* i2c_smbus_read_block_data() worked here,
- * so use i2c_smbus_read_word_data() instead.
+ * so use i2c_smbus_read_word_swapped() instead.
* We could also try to use i2c_master_recv(),
* but that is not always supported.
*/
- rv = i2c_smbus_read_word_data(client, 0);
+ rv = i2c_smbus_read_word_swapped(client, 0);
if (rv < 0) {
dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
return -1;
}
/*
* Validate/verify readback adc channel (in bit 11..14).
- * High byte is in lower 8 bit of rv, so only shift by 3.
*/
- radc = (rv >> 3) & 0x0f;
+ radc = (rv >> 11) & 0x0f;
if (radc != adc) {
dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d",
adc, radc);
return -EIO;
}
- /*
- * Chip replies with H/L, while SMBus expects L/H.
- * Thus, byte order is reversed, and we have to swap
- * the result.
- */
- rv = swab16(rv) & SMM665_ADC_MASK;
- return rv;
+ return rv & SMM665_ADC_MASK;
}
static struct smm665_data *smm665_update_device(struct device *dev)
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 9fb7516..65c88ff 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -113,7 +113,7 @@
u8 temp[4];
};
-static int smsc47b397_read_value(struct smsc47b397_data* data, u8 reg)
+static int smsc47b397_read_value(struct smsc47b397_data *data, u8 reg)
{
int res;
@@ -265,7 +265,8 @@
return -EBUSY;
}
- if (!(data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) {
+ data = kzalloc(sizeof(struct smsc47b397_data), GFP_KERNEL);
+ if (!data) {
err = -ENOMEM;
goto error_release;
}
@@ -276,7 +277,8 @@
mutex_init(&data->update_lock);
platform_set_drvdata(pdev, data);
- if ((err = sysfs_create_group(&dev->kobj, &smsc47b397_group)))
+ err = sysfs_create_group(&dev->kobj, &smsc47b397_group);
+ if (err)
goto error_free;
data->hwmon_dev = hwmon_device_register(dev);
@@ -345,7 +347,7 @@
superio_enter();
id = force_id ? force_id : superio_inb(SUPERIO_REG_DEVID);
- switch(id) {
+ switch (id) {
case 0x81:
name = "SCH5307-NS";
break;
@@ -379,7 +381,8 @@
unsigned short address;
int ret;
- if ((ret = smsc47b397_find(&address)))
+ ret = smsc47b397_find(&address);
+ if (ret)
return ret;
ret = platform_driver_register(&smsc47b397_driver);
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 5bd1949..643aa8c 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -55,19 +55,6 @@
int temp[3];
};
-/* SMBus specifies low byte first, but the TMP102 returns high byte first,
- * so we have to swab16 the values */
-static inline int tmp102_read_reg(struct i2c_client *client, u8 reg)
-{
- int result = i2c_smbus_read_word_data(client, reg);
- return result < 0 ? result : swab16(result);
-}
-
-static inline int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(val));
-}
-
/* convert left adjusted 13-bit TMP102 register value to milliCelsius */
static inline int tmp102_reg_to_mC(s16 val)
{
@@ -94,7 +81,8 @@
if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
int i;
for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
- int status = tmp102_read_reg(client, tmp102_reg[i]);
+ int status = i2c_smbus_read_word_swapped(client,
+ tmp102_reg[i]);
if (status > -1)
tmp102->temp[i] = tmp102_reg_to_mC(status);
}
@@ -130,8 +118,8 @@
mutex_lock(&tmp102->lock);
tmp102->temp[sda->index] = val;
- status = tmp102_write_reg(client, tmp102_reg[sda->index],
- tmp102_mC_to_reg(val));
+ status = i2c_smbus_write_word_swapped(client, tmp102_reg[sda->index],
+ tmp102_mC_to_reg(val));
mutex_unlock(&tmp102->lock);
return status ? : count;
}
@@ -178,18 +166,19 @@
}
i2c_set_clientdata(client, tmp102);
- status = tmp102_read_reg(client, TMP102_CONF_REG);
+ status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (status < 0) {
dev_err(&client->dev, "error reading config register\n");
goto fail_free;
}
tmp102->config_orig = status;
- status = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
+ status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+ TMP102_CONFIG);
if (status < 0) {
dev_err(&client->dev, "error writing config register\n");
goto fail_restore_config;
}
- status = tmp102_read_reg(client, TMP102_CONF_REG);
+ status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (status < 0) {
dev_err(&client->dev, "error reading config register\n");
goto fail_restore_config;
@@ -222,7 +211,8 @@
fail_remove_sysfs:
sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
fail_restore_config:
- tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
+ i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+ tmp102->config_orig);
fail_free:
kfree(tmp102);
@@ -240,10 +230,10 @@
if (tmp102->config_orig & TMP102_CONF_SD) {
int config;
- config = tmp102_read_reg(client, TMP102_CONF_REG);
+ config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (config >= 0)
- tmp102_write_reg(client, TMP102_CONF_REG,
- config | TMP102_CONF_SD);
+ i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+ config | TMP102_CONF_SD);
}
kfree(tmp102);
@@ -257,12 +247,12 @@
struct i2c_client *client = to_i2c_client(dev);
int config;
- config = tmp102_read_reg(client, TMP102_CONF_REG);
+ config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (config < 0)
return config;
config |= TMP102_CONF_SD;
- return tmp102_write_reg(client, TMP102_CONF_REG, config);
+ return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
}
static int tmp102_resume(struct device *dev)
@@ -270,12 +260,12 @@
struct i2c_client *client = to_i2c_client(dev);
int config;
- config = tmp102_read_reg(client, TMP102_CONF_REG);
+ config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (config < 0)
return config;
config &= ~TMP102_CONF_SD;
- return tmp102_write_reg(client, TMP102_CONF_REG, config);
+ return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
}
static const struct dev_pm_ops tmp102_dev_pm_ops = {
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 98aab4b..483cb26 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1,7 +1,7 @@
/*
w83627ehf - Driver for the hardware monitoring functionality of
the Winbond W83627EHF Super-I/O chip
- Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2005-2011 Jean Delvare <khali@linux-fr.org>
Copyright (C) 2006 Yuan Mu (Winbond),
Rudolf Marek <r.marek@assembler.cz>
David Hubbard <david.c.hubbard@gmail.com>
@@ -39,6 +39,7 @@
0x8860 0xa1
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3
+ w83627uhg 8 2 2 2 0xa230 0xc1 0x5ca3
w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3
nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3
@@ -61,14 +62,17 @@
#include <linux/io.h>
#include "lm75.h"
-enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b, nct6775,
- nct6776 };
+enum kinds {
+ w83627ehf, w83627dhg, w83627dhg_p, w83627uhg,
+ w83667hg, w83667hg_b, nct6775, nct6776,
+};
/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
static const char * const w83627ehf_device_names[] = {
"w83627ehf",
"w83627dhg",
"w83627dhg",
+ "w83627uhg",
"w83667hg",
"w83667hg",
"nct6775",
@@ -104,6 +108,7 @@
#define SIO_W83627EHG_ID 0x8860
#define SIO_W83627DHG_ID 0xa020
#define SIO_W83627DHG_P_ID 0xb070
+#define SIO_W83627UHG_ID 0xa230
#define SIO_W83667HG_ID 0xa510
#define SIO_W83667HG_B_ID 0xb350
#define SIO_NCT6775_ID 0xb470
@@ -388,18 +393,23 @@
return 1 << reg;
}
-/* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
+/* Some of the voltage inputs have internal scaling, the tables below
+ * contain 8 (the ADC LSB in mV) * scaling factor * 100 */
+static const u16 scale_in_common[10] = {
+ 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800
+};
+static const u16 scale_in_w83627uhg[9] = {
+ 800, 800, 3328, 3424, 800, 800, 0, 3328, 3400
+};
-static u8 scale_in[10] = { 8, 8, 16, 16, 8, 8, 8, 16, 16, 8 };
-
-static inline long in_from_reg(u8 reg, u8 nr)
+static inline long in_from_reg(u8 reg, u8 nr, const u16 *scale_in)
{
- return reg * scale_in[nr];
+ return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100);
}
-static inline u8 in_to_reg(u32 val, u8 nr)
+static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in)
{
- return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0,
+ return SENSORS_LIMIT(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0,
255);
}
@@ -430,6 +440,7 @@
const u16 *REG_FAN_STOP_TIME;
const u16 *REG_FAN_MAX_OUTPUT;
const u16 *REG_FAN_STEP_OUTPUT;
+ const u16 *scale_in;
unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
@@ -481,7 +492,8 @@
u8 vrm;
u16 have_temp;
- u8 in6_skip;
+ u8 in6_skip:1;
+ u8 temp3_val_only:1;
};
struct w83627ehf_sio_data {
@@ -907,7 +919,8 @@
struct sensor_device_attribute *sensor_attr = \
to_sensor_dev_attr(attr); \
int nr = sensor_attr->index; \
- return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr)); \
+ return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr, \
+ data->scale_in)); \
}
show_in_reg(in)
show_in_reg(in_min)
@@ -928,7 +941,7 @@
if (err < 0) \
return err; \
mutex_lock(&data->update_lock); \
- data->in_##reg[nr] = in_to_reg(val, nr); \
+ data->in_##reg[nr] = in_to_reg(val, nr, data->scale_in); \
w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
mutex_unlock(&data->update_lock); \
@@ -1617,25 +1630,28 @@
store_fan_step_output, 3),
};
+static struct sensor_device_attribute sda_sf3_arrays_fan3[] = {
+ SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
+ store_fan_stop_time, 2),
+ SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
+ store_fan_start_output, 2),
+ SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
+ store_fan_stop_output, 2),
+};
+
static struct sensor_device_attribute sda_sf3_arrays[] = {
SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
store_fan_stop_time, 0),
SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
store_fan_stop_time, 1),
- SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
- store_fan_stop_time, 2),
SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
store_fan_start_output, 0),
SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
store_fan_start_output, 1),
- SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
- store_fan_start_output, 2),
SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
store_fan_stop_output, 0),
SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
store_fan_stop_output, 1),
- SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
- store_fan_stop_output, 2),
};
@@ -1728,6 +1744,8 @@
data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
device_remove_file(dev, &attr->dev_attr);
}
+ for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++)
+ device_remove_file(dev, &sda_sf3_arrays_fan3[i].dev_attr);
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
for (i = 0; i < data->in_num; i++) {
@@ -1756,6 +1774,8 @@
continue;
device_remove_file(dev, &sda_temp_input[i].dev_attr);
device_remove_file(dev, &sda_temp_label[i].dev_attr);
+ if (i == 2 && data->temp3_val_only)
+ continue;
device_remove_file(dev, &sda_temp_max[i].dev_attr);
device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
if (i > 2)
@@ -1808,11 +1828,21 @@
case w83627ehf:
diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
break;
+ case w83627uhg:
+ diode = 0x00;
+ break;
default:
diode = 0x70;
}
for (i = 0; i < 3; i++) {
- if ((tmp & (0x02 << i)))
+ const char *label = data->temp_label[data->temp_src[i]];
+
+ /* Digital source overrides analog type */
+ if (strncmp(label, "PECI", 4) == 0)
+ data->temp_type[i] = 6;
+ else if (strncmp(label, "AMD", 3) == 0)
+ data->temp_type[i] = 5;
+ else if ((tmp & (0x02 << i)))
data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
else
data->temp_type[i] = 4; /* thermistor */
@@ -1846,11 +1876,31 @@
}
static void __devinit
+w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp)
+{
+ int i;
+
+ for (i = 0; i < n_temp; i++) {
+ data->reg_temp[i] = W83627EHF_REG_TEMP[i];
+ data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
+ data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
+ data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
+ }
+}
+
+static void __devinit
w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
struct w83627ehf_data *data)
{
int fan3pin, fan4pin, fan4min, fan5pin, regval;
+ /* The W83627UHG is simple, only two fan inputs, no config */
+ if (sio_data->kind == w83627uhg) {
+ data->has_fan = 0x03; /* fan1 and fan2 */
+ data->has_fan_min = 0x03;
+ return;
+ }
+
superio_enter(sio_data->sioreg);
/* fan4 and fan5 share some pins with the GPIO and serial flash */
@@ -1942,24 +1992,25 @@
/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
- /* 667HG, NCT6775F, and NCT6776F have 3 pwms */
- data->pwm_num = (sio_data->kind == w83667hg
- || sio_data->kind == w83667hg_b
- || sio_data->kind == nct6775
- || sio_data->kind == nct6776) ? 3 : 4;
-
- data->have_temp = 0x07;
- /* Check temp3 configuration bit for 667HG */
- if (sio_data->kind == w83667hg) {
- u8 reg;
-
- reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]);
- if (reg & 0x01)
- data->have_temp &= ~(1 << 2);
- else
- data->in6_skip = 1; /* either temp3 or in6 */
+ /* 667HG, NCT6775F, and NCT6776F have 3 pwms, and 627UHG has only 2 */
+ switch (sio_data->kind) {
+ default:
+ data->pwm_num = 4;
+ break;
+ case w83667hg:
+ case w83667hg_b:
+ case nct6775:
+ case nct6776:
+ data->pwm_num = 3;
+ break;
+ case w83627uhg:
+ data->pwm_num = 2;
+ break;
}
+ /* Default to 3 temperature inputs, code below will adjust as needed */
+ data->have_temp = 0x07;
+
/* Deal with temperature register setup first. */
if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
int mask = 0;
@@ -2035,16 +2086,12 @@
} else if (sio_data->kind == w83667hg_b) {
u8 reg;
+ w83627ehf_set_temp_reg_ehf(data, 4);
+
/*
* Temperature sources are selected with bank 0, registers 0x49
* and 0x4a.
*/
- for (i = 0; i < ARRAY_SIZE(W83627EHF_REG_TEMP); i++) {
- data->reg_temp[i] = W83627EHF_REG_TEMP[i];
- data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
- data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
- data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
- }
reg = w83627ehf_read_value(data, 0x4a);
data->temp_src[0] = reg >> 5;
reg = w83627ehf_read_value(data, 0x49);
@@ -2078,13 +2125,60 @@
data->in6_skip = 1;
data->temp_label = w83667hg_b_temp_label;
+ } else if (sio_data->kind == w83627uhg) {
+ u8 reg;
+
+ w83627ehf_set_temp_reg_ehf(data, 3);
+
+ /*
+ * Temperature sources for temp1 and temp2 are selected with
+ * bank 0, registers 0x49 and 0x4a.
+ */
+ data->temp_src[0] = 0; /* SYSTIN */
+ reg = w83627ehf_read_value(data, 0x49) & 0x07;
+ /* Adjust to have the same mapping as other source registers */
+ if (reg == 0)
+ data->temp_src[1]++;
+ else if (reg >= 2 && reg <= 5)
+ data->temp_src[1] += 2;
+ else /* should never happen */
+ data->have_temp &= ~(1 << 1);
+ reg = w83627ehf_read_value(data, 0x4a);
+ data->temp_src[2] = reg >> 5;
+
+ /*
+ * Skip temp3 if source is invalid or the same as temp1
+ * or temp2.
+ */
+ if (data->temp_src[2] == 2 || data->temp_src[2] == 3 ||
+ data->temp_src[2] == data->temp_src[0] ||
+ ((data->have_temp & (1 << 1)) &&
+ data->temp_src[2] == data->temp_src[1]))
+ data->have_temp &= ~(1 << 2);
+ else
+ data->temp3_val_only = 1; /* No limit regs */
+
+ data->in6_skip = 1; /* No VIN3 */
+
+ data->temp_label = w83667hg_b_temp_label;
} else {
+ w83627ehf_set_temp_reg_ehf(data, 3);
+
/* Temperature sources are fixed */
- for (i = 0; i < 3; i++) {
- data->reg_temp[i] = W83627EHF_REG_TEMP[i];
- data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
- data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
- data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
+
+ if (sio_data->kind == w83667hg) {
+ u8 reg;
+
+ /*
+ * Chip supports either AUXTIN or VIN3. Try to find
+ * out which one.
+ */
+ reg = w83627ehf_read_value(data,
+ W83627EHF_REG_TEMP_CONFIG[2]);
+ if (reg & 0x01)
+ data->have_temp &= ~(1 << 2);
+ else
+ data->in6_skip = 1;
}
}
@@ -2144,6 +2238,12 @@
W83627EHF_REG_FAN_STEP_OUTPUT_COMMON;
}
+ /* Setup input voltage scaling factors */
+ if (sio_data->kind == w83627uhg)
+ data->scale_in = scale_in_w83627uhg;
+ else
+ data->scale_in = scale_in_common;
+
/* Initialize the chip */
w83627ehf_init_device(data, sio_data->kind);
@@ -2160,7 +2260,7 @@
err = device_create_file(dev, &dev_attr_cpu0_vid);
if (err)
goto exit_release;
- } else {
+ } else if (sio_data->kind != w83627uhg) {
superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
/* Set VID input sensibility if needed. In theory the
@@ -2250,7 +2350,14 @@
goto exit_remove;
}
}
- /* if fan4 is enabled create the sf3 files for it */
+ /* if fan3 and fan4 are enabled create the sf3 files for them */
+ if ((data->has_fan & (1 << 2)) && data->pwm_num >= 3)
+ for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++) {
+ err = device_create_file(dev,
+ &sda_sf3_arrays_fan3[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
err = device_create_file(dev,
@@ -2318,6 +2425,8 @@
if (err)
goto exit_remove;
}
+ if (i == 2 && data->temp3_val_only)
+ continue;
if (data->reg_temp_over[i]) {
err = device_create_file(dev,
&sda_temp_max[i].dev_attr);
@@ -2401,6 +2510,7 @@
static const char __initdata sio_name_W83627EHG[] = "W83627EHG";
static const char __initdata sio_name_W83627DHG[] = "W83627DHG";
static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
+ static const char __initdata sio_name_W83627UHG[] = "W83627UHG";
static const char __initdata sio_name_W83667HG[] = "W83667HG";
static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B";
static const char __initdata sio_name_NCT6775[] = "NCT6775F";
@@ -2433,6 +2543,10 @@
sio_data->kind = w83627dhg_p;
sio_name = sio_name_W83627DHG_P;
break;
+ case SIO_W83627UHG_ID:
+ sio_data->kind = w83627uhg;
+ sio_name = sio_name_W83627UHG;
+ break;
case SIO_W83667HG_ID:
sio_data->kind = w83667hg;
sio_name = sio_name_W83667HG;
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index eed43a0..65b685e 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1245,17 +1245,17 @@
/* convert from ISA to LM75 I2C addresses */
switch (reg & 0xff) {
case 0x50: /* TEMP */
- res = swab16(i2c_smbus_read_word_data(cl, 0));
+ res = i2c_smbus_read_word_swapped(cl, 0);
break;
case 0x52: /* CONFIG */
res = i2c_smbus_read_byte_data(cl, 1);
break;
case 0x53: /* HYST */
- res = swab16(i2c_smbus_read_word_data(cl, 2));
+ res = i2c_smbus_read_word_swapped(cl, 2);
break;
case 0x55: /* OVER */
default:
- res = swab16(i2c_smbus_read_word_data(cl, 3));
+ res = i2c_smbus_read_word_swapped(cl, 3);
break;
}
}
@@ -1289,10 +1289,10 @@
i2c_smbus_write_byte_data(cl, 1, value & 0xff);
break;
case 0x53: /* HYST */
- i2c_smbus_write_word_data(cl, 2, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 2, value);
break;
case 0x55: /* OVER */
- i2c_smbus_write_word_data(cl, 3, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 3, value);
break;
}
}
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index 1f29bab..c7c3128 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -2,22 +2,31 @@
# Generic HWSPINLOCK framework
#
+# HWSPINLOCK always gets selected by whoever wants it.
config HWSPINLOCK
- tristate "Generic Hardware Spinlock framework"
- depends on ARCH_OMAP4
- help
- Say y here to support the generic hardware spinlock framework.
- You only need to enable this if you have hardware spinlock module
- on your system (usually only relevant if your system has remote slave
- coprocessors).
+ tristate
- If unsure, say N.
+menu "Hardware Spinlock drivers"
config HWSPINLOCK_OMAP
tristate "OMAP Hardware Spinlock device"
- depends on HWSPINLOCK && ARCH_OMAP4
+ depends on ARCH_OMAP4
+ select HWSPINLOCK
help
Say y here to support the OMAP Hardware Spinlock device (firstly
introduced in OMAP4).
If unsure, say N.
+
+config HSEM_U8500
+ tristate "STE Hardware Semaphore functionality"
+ depends on ARCH_U8500
+ select HWSPINLOCK
+ help
+ Say y here to support the STE Hardware Semaphore functionality, which
+ provides a synchronisation mechanism for the various processor on the
+ SoC.
+
+ If unsure, say N.
+
+endmenu
diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
index 5729a3f..93eb64b 100644
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o
obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o
+obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o
diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c
index 43a6271..61c9cf1 100644
--- a/drivers/hwspinlock/hwspinlock_core.c
+++ b/drivers/hwspinlock/hwspinlock_core.c
@@ -26,6 +26,7 @@
#include <linux/radix-tree.h>
#include <linux/hwspinlock.h>
#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
#include "hwspinlock_internal.h"
@@ -52,10 +53,12 @@
static RADIX_TREE(hwspinlock_tree, GFP_KERNEL);
/*
- * Synchronization of access to the tree is achieved using this spinlock,
+ * Synchronization of access to the tree is achieved using this mutex,
* as the radix-tree API requires that users provide all synchronisation.
+ * A mutex is needed because we're using non-atomic radix tree allocations.
*/
-static DEFINE_SPINLOCK(hwspinlock_tree_lock);
+static DEFINE_MUTEX(hwspinlock_tree_lock);
+
/**
* __hwspin_trylock() - attempt to lock a specific hwspinlock
@@ -114,7 +117,7 @@
return -EBUSY;
/* try to take the hwspinlock device */
- ret = hwlock->ops->trylock(hwlock);
+ ret = hwlock->bank->ops->trylock(hwlock);
/* if hwlock is already taken, undo spin_trylock_* and exit */
if (!ret) {
@@ -196,8 +199,8 @@
* Allow platform-specific relax handlers to prevent
* hogging the interconnect (no sleeping, though)
*/
- if (hwlock->ops->relax)
- hwlock->ops->relax(hwlock);
+ if (hwlock->bank->ops->relax)
+ hwlock->bank->ops->relax(hwlock);
}
return ret;
@@ -242,7 +245,7 @@
*/
mb();
- hwlock->ops->unlock(hwlock);
+ hwlock->bank->ops->unlock(hwlock);
/* Undo the spin_trylock{_irq, _irqsave} called while locking */
if (mode == HWLOCK_IRQSTATE)
@@ -254,68 +257,37 @@
}
EXPORT_SYMBOL_GPL(__hwspin_unlock);
-/**
- * hwspin_lock_register() - register a new hw spinlock
- * @hwlock: hwspinlock to register.
- *
- * This function should be called from the underlying platform-specific
- * implementation, to register a new hwspinlock instance.
- *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context.
- *
- * Returns 0 on success, or an appropriate error code on failure
- */
-int hwspin_lock_register(struct hwspinlock *hwlock)
+static int hwspin_lock_register_single(struct hwspinlock *hwlock, int id)
{
struct hwspinlock *tmp;
int ret;
- if (!hwlock || !hwlock->ops ||
- !hwlock->ops->trylock || !hwlock->ops->unlock) {
- pr_err("invalid parameters\n");
- return -EINVAL;
+ mutex_lock(&hwspinlock_tree_lock);
+
+ ret = radix_tree_insert(&hwspinlock_tree, id, hwlock);
+ if (ret) {
+ if (ret == -EEXIST)
+ pr_err("hwspinlock id %d already exists!\n", id);
+ goto out;
}
- spin_lock_init(&hwlock->lock);
-
- spin_lock(&hwspinlock_tree_lock);
-
- ret = radix_tree_insert(&hwspinlock_tree, hwlock->id, hwlock);
- if (ret)
- goto out;
-
/* mark this hwspinlock as available */
- tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock->id,
- HWSPINLOCK_UNUSED);
+ tmp = radix_tree_tag_set(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
/* self-sanity check which should never fail */
WARN_ON(tmp != hwlock);
out:
- spin_unlock(&hwspinlock_tree_lock);
- return ret;
+ mutex_unlock(&hwspinlock_tree_lock);
+ return 0;
}
-EXPORT_SYMBOL_GPL(hwspin_lock_register);
-/**
- * hwspin_lock_unregister() - unregister an hw spinlock
- * @id: index of the specific hwspinlock to unregister
- *
- * This function should be called from the underlying platform-specific
- * implementation, to unregister an existing (and unused) hwspinlock.
- *
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context.
- *
- * Returns the address of hwspinlock @id on success, or NULL on failure
- */
-struct hwspinlock *hwspin_lock_unregister(unsigned int id)
+static struct hwspinlock *hwspin_lock_unregister_single(unsigned int id)
{
struct hwspinlock *hwlock = NULL;
int ret;
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* make sure the hwspinlock is not in use (tag is set) */
ret = radix_tree_tag_get(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
@@ -331,9 +303,91 @@
}
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return hwlock;
}
+
+/**
+ * hwspin_lock_register() - register a new hw spinlock device
+ * @bank: the hwspinlock device, which usually provides numerous hw locks
+ * @dev: the backing device
+ * @ops: hwspinlock handlers for this device
+ * @base_id: id of the first hardware spinlock in this bank
+ * @num_locks: number of hwspinlocks provided by this device
+ *
+ * This function should be called from the underlying platform-specific
+ * implementation, to register a new hwspinlock device instance.
+ *
+ * Should be called from a process context (might sleep)
+ *
+ * Returns 0 on success, or an appropriate error code on failure
+ */
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+ const struct hwspinlock_ops *ops, int base_id, int num_locks)
+{
+ struct hwspinlock *hwlock;
+ int ret = 0, i;
+
+ if (!bank || !ops || !dev || !num_locks || !ops->trylock ||
+ !ops->unlock) {
+ pr_err("invalid parameters\n");
+ return -EINVAL;
+ }
+
+ bank->dev = dev;
+ bank->ops = ops;
+ bank->base_id = base_id;
+ bank->num_locks = num_locks;
+
+ for (i = 0; i < num_locks; i++) {
+ hwlock = &bank->lock[i];
+
+ spin_lock_init(&hwlock->lock);
+ hwlock->bank = bank;
+
+ ret = hwspin_lock_register_single(hwlock, i);
+ if (ret)
+ goto reg_failed;
+ }
+
+ return 0;
+
+reg_failed:
+ while (--i >= 0)
+ hwspin_lock_unregister_single(i);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hwspin_lock_register);
+
+/**
+ * hwspin_lock_unregister() - unregister an hw spinlock device
+ * @bank: the hwspinlock device, which usually provides numerous hw locks
+ *
+ * This function should be called from the underlying platform-specific
+ * implementation, to unregister an existing (and unused) hwspinlock.
+ *
+ * Should be called from a process context (might sleep)
+ *
+ * Returns 0 on success, or an appropriate error code on failure
+ */
+int hwspin_lock_unregister(struct hwspinlock_device *bank)
+{
+ struct hwspinlock *hwlock, *tmp;
+ int i;
+
+ for (i = 0; i < bank->num_locks; i++) {
+ hwlock = &bank->lock[i];
+
+ tmp = hwspin_lock_unregister_single(bank->base_id + i);
+ if (!tmp)
+ return -EBUSY;
+
+ /* self-sanity check that should never fail */
+ WARN_ON(tmp != hwlock);
+ }
+
+ return 0;
+}
EXPORT_SYMBOL_GPL(hwspin_lock_unregister);
/**
@@ -348,24 +402,25 @@
*/
static int __hwspin_lock_request(struct hwspinlock *hwlock)
{
+ struct device *dev = hwlock->bank->dev;
struct hwspinlock *tmp;
int ret;
/* prevent underlying implementation from being removed */
- if (!try_module_get(hwlock->owner)) {
- dev_err(hwlock->dev, "%s: can't get owner\n", __func__);
+ if (!try_module_get(dev->driver->owner)) {
+ dev_err(dev, "%s: can't get owner\n", __func__);
return -EINVAL;
}
/* notify PM core that power is now needed */
- ret = pm_runtime_get_sync(hwlock->dev);
+ ret = pm_runtime_get_sync(dev);
if (ret < 0) {
- dev_err(hwlock->dev, "%s: can't power on device\n", __func__);
+ dev_err(dev, "%s: can't power on device\n", __func__);
return ret;
}
/* mark hwspinlock as used, should not fail */
- tmp = radix_tree_tag_clear(&hwspinlock_tree, hwlock->id,
+ tmp = radix_tree_tag_clear(&hwspinlock_tree, hwlock_to_id(hwlock),
HWSPINLOCK_UNUSED);
/* self-sanity check that should never fail */
@@ -387,7 +442,7 @@
return -EINVAL;
}
- return hwlock->id;
+ return hwlock_to_id(hwlock);
}
EXPORT_SYMBOL_GPL(hwspin_lock_get_id);
@@ -400,9 +455,7 @@
* to the remote core before it can be used for synchronization (to get the
* id of a given hwlock, use hwspin_lock_get_id()).
*
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
*
* Returns the address of the assigned hwspinlock, or NULL on error
*/
@@ -411,7 +464,7 @@
struct hwspinlock *hwlock;
int ret;
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* look for an unused lock */
ret = radix_tree_gang_lookup_tag(&hwspinlock_tree, (void **)&hwlock,
@@ -431,7 +484,7 @@
hwlock = NULL;
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return hwlock;
}
EXPORT_SYMBOL_GPL(hwspin_lock_request);
@@ -445,9 +498,7 @@
* Usually early board code will be calling this function in order to
* reserve specific hwspinlock ids for predefined purposes.
*
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
*
* Returns the address of the assigned hwspinlock, or NULL on error
*/
@@ -456,7 +507,7 @@
struct hwspinlock *hwlock;
int ret;
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* make sure this hwspinlock exists */
hwlock = radix_tree_lookup(&hwspinlock_tree, id);
@@ -466,7 +517,7 @@
}
/* sanity check (this shouldn't happen) */
- WARN_ON(hwlock->id != id);
+ WARN_ON(hwlock_to_id(hwlock) != id);
/* make sure this hwspinlock is unused */
ret = radix_tree_tag_get(&hwspinlock_tree, id, HWSPINLOCK_UNUSED);
@@ -482,7 +533,7 @@
hwlock = NULL;
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return hwlock;
}
EXPORT_SYMBOL_GPL(hwspin_lock_request_specific);
@@ -495,14 +546,13 @@
* Should only be called with an @hwlock that was retrieved from
* an earlier call to omap_hwspin_lock_request{_specific}.
*
- * Can be called from an atomic context (will not sleep) but not from
- * within interrupt context (simply because there is no use case for
- * that yet).
+ * Should be called from a process context (might sleep)
*
* Returns 0 on success, or an appropriate error code on failure
*/
int hwspin_lock_free(struct hwspinlock *hwlock)
{
+ struct device *dev = hwlock->bank->dev;
struct hwspinlock *tmp;
int ret;
@@ -511,34 +561,34 @@
return -EINVAL;
}
- spin_lock(&hwspinlock_tree_lock);
+ mutex_lock(&hwspinlock_tree_lock);
/* make sure the hwspinlock is used */
- ret = radix_tree_tag_get(&hwspinlock_tree, hwlock->id,
+ ret = radix_tree_tag_get(&hwspinlock_tree, hwlock_to_id(hwlock),
HWSPINLOCK_UNUSED);
if (ret == 1) {
- dev_err(hwlock->dev, "%s: hwlock is already free\n", __func__);
+ dev_err(dev, "%s: hwlock is already free\n", __func__);
dump_stack();
ret = -EINVAL;
goto out;
}
/* notify the underlying device that power is not needed */
- ret = pm_runtime_put(hwlock->dev);
+ ret = pm_runtime_put(dev);
if (ret < 0)
goto out;
/* mark this hwspinlock as available */
- tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock->id,
+ tmp = radix_tree_tag_set(&hwspinlock_tree, hwlock_to_id(hwlock),
HWSPINLOCK_UNUSED);
/* sanity check (this shouldn't happen) */
WARN_ON(tmp != hwlock);
- module_put(hwlock->owner);
+ module_put(dev->driver->owner);
out:
- spin_unlock(&hwspinlock_tree_lock);
+ mutex_unlock(&hwspinlock_tree_lock);
return ret;
}
EXPORT_SYMBOL_GPL(hwspin_lock_free);
diff --git a/drivers/hwspinlock/hwspinlock_internal.h b/drivers/hwspinlock/hwspinlock_internal.h
index 69935e6..d26f78b 100644
--- a/drivers/hwspinlock/hwspinlock_internal.h
+++ b/drivers/hwspinlock/hwspinlock_internal.h
@@ -21,6 +21,8 @@
#include <linux/spinlock.h>
#include <linux/device.h>
+struct hwspinlock_device;
+
/**
* struct hwspinlock_ops - platform-specific hwspinlock handlers
*
@@ -39,23 +41,37 @@
/**
* struct hwspinlock - this struct represents a single hwspinlock instance
- *
- * @dev: underlying device, will be used to invoke runtime PM api
- * @ops: platform-specific hwspinlock handlers
- * @id: a global, unique, system-wide, index of the lock.
+ * @bank: the hwspinlock_device structure which owns this lock
* @lock: initialized and used by hwspinlock core
- * @owner: underlying implementation module, used to maintain module ref count
- *
- * Note: currently simplicity was opted for, but later we can squeeze some
- * memory bytes by grouping the dev, ops and owner members in a single
- * per-platform struct, and have all hwspinlocks point at it.
+ * @priv: private data, owned by the underlying platform-specific hwspinlock drv
*/
struct hwspinlock {
+ struct hwspinlock_device *bank;
+ spinlock_t lock;
+ void *priv;
+};
+
+/**
+ * struct hwspinlock_device - a device which usually spans numerous hwspinlocks
+ * @dev: underlying device, will be used to invoke runtime PM api
+ * @ops: platform-specific hwspinlock handlers
+ * @base_id: id index of the first lock in this device
+ * @num_locks: number of locks in this device
+ * @lock: dynamically allocated array of 'struct hwspinlock'
+ */
+struct hwspinlock_device {
struct device *dev;
const struct hwspinlock_ops *ops;
- int id;
- spinlock_t lock;
- struct module *owner;
+ int base_id;
+ int num_locks;
+ struct hwspinlock lock[0];
};
+static inline int hwlock_to_id(struct hwspinlock *hwlock)
+{
+ int local_id = hwlock - &hwlock->bank->lock[0];
+
+ return hwlock->bank->base_id + local_id;
+}
+
#endif /* __HWSPINLOCK_HWSPINLOCK_H */
diff --git a/drivers/hwspinlock/omap_hwspinlock.c b/drivers/hwspinlock/omap_hwspinlock.c
index a8f0273..887d34e 100644
--- a/drivers/hwspinlock/omap_hwspinlock.c
+++ b/drivers/hwspinlock/omap_hwspinlock.c
@@ -41,33 +41,20 @@
#define SPINLOCK_NOTTAKEN (0) /* free */
#define SPINLOCK_TAKEN (1) /* locked */
-#define to_omap_hwspinlock(lock) \
- container_of(lock, struct omap_hwspinlock, lock)
-
-struct omap_hwspinlock {
- struct hwspinlock lock;
- void __iomem *addr;
-};
-
-struct omap_hwspinlock_state {
- int num_locks; /* Total number of locks in system */
- void __iomem *io_base; /* Mapped base address */
-};
-
static int omap_hwspinlock_trylock(struct hwspinlock *lock)
{
- struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
+ void __iomem *lock_addr = lock->priv;
/* attempt to acquire the lock by reading its value */
- return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr));
+ return (SPINLOCK_NOTTAKEN == readl(lock_addr));
}
static void omap_hwspinlock_unlock(struct hwspinlock *lock)
{
- struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
+ void __iomem *lock_addr = lock->priv;
/* release the lock by writing 0 to it */
- writel(SPINLOCK_NOTTAKEN, omap_lock->addr);
+ writel(SPINLOCK_NOTTAKEN, lock_addr);
}
/*
@@ -93,26 +80,23 @@
static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
{
- struct omap_hwspinlock *omap_lock;
- struct omap_hwspinlock_state *state;
- struct hwspinlock *lock;
+ struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+ struct hwspinlock_device *bank;
+ struct hwspinlock *hwlock;
struct resource *res;
void __iomem *io_base;
- int i, ret;
+ int num_locks, i, ret;
+
+ if (!pdata)
+ return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
- state = kzalloc(sizeof(*state), GFP_KERNEL);
- if (!state)
- return -ENOMEM;
-
io_base = ioremap(res->start, resource_size(res));
- if (!io_base) {
- ret = -ENOMEM;
- goto free_state;
- }
+ if (!io_base)
+ return -ENOMEM;
/* Determine number of locks */
i = readl(io_base + SYSSTATUS_OFFSET);
@@ -124,10 +108,18 @@
goto iounmap_base;
}
- state->num_locks = i * 32;
- state->io_base = io_base;
+ num_locks = i * 32; /* actual number of locks in this device */
- platform_set_drvdata(pdev, state);
+ bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
+ if (!bank) {
+ ret = -ENOMEM;
+ goto iounmap_base;
+ }
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+ hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
/*
* runtime PM will make sure the clock of this module is
@@ -135,79 +127,46 @@
*/
pm_runtime_enable(&pdev->dev);
- for (i = 0; i < state->num_locks; i++) {
- omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL);
- if (!omap_lock) {
- ret = -ENOMEM;
- goto free_locks;
- }
-
- omap_lock->lock.dev = &pdev->dev;
- omap_lock->lock.owner = THIS_MODULE;
- omap_lock->lock.id = i;
- omap_lock->lock.ops = &omap_hwspinlock_ops;
- omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
-
- ret = hwspin_lock_register(&omap_lock->lock);
- if (ret) {
- kfree(omap_lock);
- goto free_locks;
- }
- }
+ ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
+ pdata->base_id, num_locks);
+ if (ret)
+ goto reg_fail;
return 0;
-free_locks:
- while (--i >= 0) {
- lock = hwspin_lock_unregister(i);
- /* this should't happen, but let's give our best effort */
- if (!lock) {
- dev_err(&pdev->dev, "%s: cleanups failed\n", __func__);
- continue;
- }
- omap_lock = to_omap_hwspinlock(lock);
- kfree(omap_lock);
- }
+reg_fail:
pm_runtime_disable(&pdev->dev);
+ kfree(bank);
iounmap_base:
iounmap(io_base);
-free_state:
- kfree(state);
return ret;
}
-static int omap_hwspinlock_remove(struct platform_device *pdev)
+static int __devexit omap_hwspinlock_remove(struct platform_device *pdev)
{
- struct omap_hwspinlock_state *state = platform_get_drvdata(pdev);
- struct hwspinlock *lock;
- struct omap_hwspinlock *omap_lock;
- int i;
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ void __iomem *io_base = bank->lock[0].priv - LOCK_BASE_OFFSET;
+ int ret;
- for (i = 0; i < state->num_locks; i++) {
- lock = hwspin_lock_unregister(i);
- /* this shouldn't happen at this point. if it does, at least
- * don't continue with the remove */
- if (!lock) {
- dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i);
- return -EBUSY;
- }
-
- omap_lock = to_omap_hwspinlock(lock);
- kfree(omap_lock);
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
}
pm_runtime_disable(&pdev->dev);
- iounmap(state->io_base);
- kfree(state);
+ iounmap(io_base);
+ kfree(bank);
return 0;
}
static struct platform_driver omap_hwspinlock_driver = {
.probe = omap_hwspinlock_probe,
- .remove = omap_hwspinlock_remove,
+ .remove = __devexit_p(omap_hwspinlock_remove),
.driver = {
.name = "omap_hwspinlock",
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c
new file mode 100644
index 0000000..143461a
--- /dev/null
+++ b/drivers/hwspinlock/u8500_hsem.c
@@ -0,0 +1,198 @@
+/*
+ * u8500 HWSEM driver
+ *
+ * Copyright (C) 2010-2011 ST-Ericsson
+ *
+ * Implements u8500 semaphore handling for protocol 1, no interrupts.
+ *
+ * Author: Mathieu Poirier <mathieu.poirier@linaro.org>
+ * Heavily borrowed from the work of :
+ * Simon Que <sque@ti.com>
+ * Hari Kanigeri <h-kanigeri2@ti.com>
+ * Ohad Ben-Cohen <ohad@wizery.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/platform_device.h>
+
+#include "hwspinlock_internal.h"
+
+/*
+ * Implementation of STE's HSem protocol 1 without interrutps.
+ * The only masterID we allow is '0x01' to force people to use
+ * HSems for synchronisation between processors rather than processes
+ * on the ARM core.
+ */
+
+#define U8500_MAX_SEMAPHORE 32 /* a total of 32 semaphore */
+#define RESET_SEMAPHORE (0) /* free */
+
+/*
+ * CPU ID for master running u8500 kernel.
+ * Hswpinlocks should only be used to synchonise operations
+ * between the Cortex A9 core and the other CPUs. Hence
+ * forcing the masterID to a preset value.
+ */
+#define HSEM_MASTER_ID 0x01
+
+#define HSEM_REGISTER_OFFSET 0x08
+
+#define HSEM_CTRL_REG 0x00
+#define HSEM_ICRALL 0x90
+#define HSEM_PROTOCOL_1 0x01
+
+static int u8500_hsem_trylock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = lock->priv;
+
+ writel(HSEM_MASTER_ID, lock_addr);
+
+ /* get only first 4 bit and compare to masterID.
+ * if equal, we have the semaphore, otherwise
+ * someone else has it.
+ */
+ return (HSEM_MASTER_ID == (0x0F & readl(lock_addr)));
+}
+
+static void u8500_hsem_unlock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = lock->priv;
+
+ /* release the lock by writing 0 to it */
+ writel(RESET_SEMAPHORE, lock_addr);
+}
+
+/*
+ * u8500: what value is recommended here ?
+ */
+static void u8500_hsem_relax(struct hwspinlock *lock)
+{
+ ndelay(50);
+}
+
+static const struct hwspinlock_ops u8500_hwspinlock_ops = {
+ .trylock = u8500_hsem_trylock,
+ .unlock = u8500_hsem_unlock,
+ .relax = u8500_hsem_relax,
+};
+
+static int __devinit u8500_hsem_probe(struct platform_device *pdev)
+{
+ struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+ struct hwspinlock_device *bank;
+ struct hwspinlock *hwlock;
+ struct resource *res;
+ void __iomem *io_base;
+ int i, ret, num_locks = U8500_MAX_SEMAPHORE;
+ ulong val;
+
+ if (!pdata)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ io_base = ioremap(res->start, resource_size(res));
+ if (!io_base) {
+ ret = -ENOMEM;
+ goto free_state;
+ }
+
+ /* make sure protocol 1 is selected */
+ val = readl(io_base + HSEM_CTRL_REG);
+ writel((val & ~HSEM_PROTOCOL_1), io_base + HSEM_CTRL_REG);
+
+ /* clear all interrupts */
+ writel(0xFFFF, io_base + HSEM_ICRALL);
+
+ bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
+ if (!bank) {
+ ret = -ENOMEM;
+ goto iounmap_base;
+ }
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+ hwlock->priv = io_base + HSEM_REGISTER_OFFSET + sizeof(u32) * i;
+
+ /* no pm needed for HSem but required to comply with hwspilock core */
+ pm_runtime_enable(&pdev->dev);
+
+ ret = hwspin_lock_register(bank, &pdev->dev, &u8500_hwspinlock_ops,
+ pdata->base_id, num_locks);
+ if (ret)
+ goto reg_fail;
+
+ return 0;
+
+reg_fail:
+ pm_runtime_disable(&pdev->dev);
+ kfree(bank);
+iounmap_base:
+ iounmap(io_base);
+ return ret;
+}
+
+static int __devexit u8500_hsem_remove(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ void __iomem *io_base = bank->lock[0].priv - HSEM_REGISTER_OFFSET;
+ int ret;
+
+ /* clear all interrupts */
+ writel(0xFFFF, io_base + HSEM_ICRALL);
+
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ pm_runtime_disable(&pdev->dev);
+ iounmap(io_base);
+ kfree(bank);
+
+ return 0;
+}
+
+static struct platform_driver u8500_hsem_driver = {
+ .probe = u8500_hsem_probe,
+ .remove = __devexit_p(u8500_hsem_remove),
+ .driver = {
+ .name = "u8500_hsem",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init u8500_hsem_init(void)
+{
+ return platform_driver_register(&u8500_hsem_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(u8500_hsem_init);
+
+static void __exit u8500_hsem_exit(void)
+{
+ platform_driver_unregister(&u8500_hsem_driver);
+}
+module_exit(u8500_hsem_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware Spinlock driver for u8500");
+MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@linaro.org>");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d1fc5cf..a3afac4 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -110,7 +110,6 @@
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
depends on PCI
- select MFD_CORE
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
@@ -301,7 +300,7 @@
config I2C_AU1550
tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
+ depends on MIPS_ALCHEMY
help
If you say yes to this option, support will be included for the
Au1550 and Au1200 SMBus interface.
@@ -350,15 +349,25 @@
devices such as DaVinci NIC.
For details please see http://www.ti.com/davinci
-config I2C_DESIGNWARE
- tristate "Synopsys DesignWare"
+config I2C_DESIGNWARE_PLATFORM
+ tristate "Synopsys DesignWare Platfrom"
depends on HAVE_CLK
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
This driver can also be built as a module. If so, the module
- will be called i2c-designware.
+ will be called i2c-designware-platform.
+
+config I2C_DESIGNWARE_PCI
+ tristate "Synopsys DesignWare PCI"
+ depends on PCI
+ help
+ If you say yes to this option, support will be included for the
+ Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-designware-pci.
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index e6cf294..fba6da6 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,7 +33,10 @@
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
-obj-$(CONFIG_I2C_DESIGNWARE) += i2c-designware.o
+obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 532828b..f314d7f 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -36,32 +36,44 @@
#include <linux/i2c.h>
#include <linux/slab.h>
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
+#define PSC_SEL 0x00
+#define PSC_CTRL 0x04
+#define PSC_SMBCFG 0x08
+#define PSC_SMBMSK 0x0C
+#define PSC_SMBPCR 0x10
+#define PSC_SMBSTAT 0x14
+#define PSC_SMBEVNT 0x18
+#define PSC_SMBTXRX 0x1C
+#define PSC_SMBTMR 0x20
+
struct i2c_au1550_data {
- u32 psc_base;
+ void __iomem *psc_base;
int xfer_timeout;
- int ack_timeout;
struct i2c_adapter adap;
struct resource *ioarea;
};
-static int
-wait_xfer_done(struct i2c_au1550_data *adap)
+static inline void WR(struct i2c_au1550_data *a, int r, unsigned long v)
{
- u32 stat;
- int i;
- volatile psc_smb_t *sp;
+ __raw_writel(v, a->psc_base + r);
+ wmb();
+}
- sp = (volatile psc_smb_t *)(adap->psc_base);
+static inline unsigned long RD(struct i2c_au1550_data *a, int r)
+{
+ return __raw_readl(a->psc_base + r);
+}
- /* Wait for Tx Buffer Empty
- */
+static int wait_xfer_done(struct i2c_au1550_data *adap)
+{
+ int i;
+
+ /* Wait for Tx Buffer Empty */
for (i = 0; i < adap->xfer_timeout; i++) {
- stat = sp->psc_smbstat;
- au_sync();
- if ((stat & PSC_SMBSTAT_TE) != 0)
+ if (RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_TE)
return 0;
udelay(1);
@@ -70,41 +82,27 @@
return -ETIMEDOUT;
}
-static int
-wait_ack(struct i2c_au1550_data *adap)
+static int wait_ack(struct i2c_au1550_data *adap)
{
- u32 stat;
- volatile psc_smb_t *sp;
+ unsigned long stat;
if (wait_xfer_done(adap))
return -ETIMEDOUT;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
- stat = sp->psc_smbevnt;
- au_sync();
-
+ stat = RD(adap, PSC_SMBEVNT);
if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
return -ETIMEDOUT;
return 0;
}
-static int
-wait_master_done(struct i2c_au1550_data *adap)
+static int wait_master_done(struct i2c_au1550_data *adap)
{
- u32 stat;
- int i;
- volatile psc_smb_t *sp;
+ int i;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
- /* Wait for Master Done.
- */
- for (i = 0; i < adap->xfer_timeout; i++) {
- stat = sp->psc_smbevnt;
- au_sync();
- if ((stat & PSC_SMBEVNT_MD) != 0)
+ /* Wait for Master Done. */
+ for (i = 0; i < 2 * adap->xfer_timeout; i++) {
+ if ((RD(adap, PSC_SMBEVNT) & PSC_SMBEVNT_MD) != 0)
return 0;
udelay(1);
}
@@ -115,29 +113,20 @@
static int
do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
{
- volatile psc_smb_t *sp;
- u32 stat;
+ unsigned long stat;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
- /* Reset the FIFOs, clear events.
- */
- stat = sp->psc_smbstat;
- sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR;
- au_sync();
+ /* Reset the FIFOs, clear events. */
+ stat = RD(adap, PSC_SMBSTAT);
+ WR(adap, PSC_SMBEVNT, PSC_SMBEVNT_ALLCLR);
if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
- sp->psc_smbpcr = PSC_SMBPCR_DC;
- au_sync();
- do {
- stat = sp->psc_smbpcr;
- au_sync();
- } while ((stat & PSC_SMBPCR_DC) != 0);
+ WR(adap, PSC_SMBPCR, PSC_SMBPCR_DC);
+ while ((RD(adap, PSC_SMBPCR) & PSC_SMBPCR_DC) != 0)
+ cpu_relax();
udelay(50);
}
- /* Write out the i2c chip address and specify operation
- */
+ /* Write out the i2c chip address and specify operation */
addr <<= 1;
if (rd)
addr |= 1;
@@ -146,56 +135,42 @@
if (q)
addr |= PSC_SMBTXRX_STP;
- /* Put byte into fifo, start up master.
- */
- sp->psc_smbtxrx = addr;
- au_sync();
- sp->psc_smbpcr = PSC_SMBPCR_MS;
- au_sync();
+ /* Put byte into fifo, start up master. */
+ WR(adap, PSC_SMBTXRX, addr);
+ WR(adap, PSC_SMBPCR, PSC_SMBPCR_MS);
if (wait_ack(adap))
return -EIO;
return (q) ? wait_master_done(adap) : 0;
}
-static u32
-wait_for_rx_byte(struct i2c_au1550_data *adap, u32 *ret_data)
+static int wait_for_rx_byte(struct i2c_au1550_data *adap, unsigned char *out)
{
- int j;
- u32 data, stat;
- volatile psc_smb_t *sp;
+ int j;
if (wait_xfer_done(adap))
return -EIO;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
j = adap->xfer_timeout * 100;
do {
j--;
if (j <= 0)
return -EIO;
- stat = sp->psc_smbstat;
- au_sync();
- if ((stat & PSC_SMBSTAT_RE) == 0)
+ if ((RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_RE) == 0)
j = 0;
else
udelay(1);
} while (j > 0);
- data = sp->psc_smbtxrx;
- au_sync();
- *ret_data = data;
+
+ *out = RD(adap, PSC_SMBTXRX);
return 0;
}
-static int
-i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
+static int i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
unsigned int len)
{
- int i;
- u32 data;
- volatile psc_smb_t *sp;
+ int i;
if (len == 0)
return 0;
@@ -204,62 +179,46 @@
* zero bytes for timing, waiting for bytes to appear in the
* receive fifo, then reading the bytes.
*/
-
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
i = 0;
- while (i < (len-1)) {
- sp->psc_smbtxrx = 0;
- au_sync();
- if (wait_for_rx_byte(adap, &data))
+ while (i < (len - 1)) {
+ WR(adap, PSC_SMBTXRX, 0);
+ if (wait_for_rx_byte(adap, &buf[i]))
return -EIO;
- buf[i] = data;
i++;
}
- /* The last byte has to indicate transfer done.
- */
- sp->psc_smbtxrx = PSC_SMBTXRX_STP;
- au_sync();
+ /* The last byte has to indicate transfer done. */
+ WR(adap, PSC_SMBTXRX, PSC_SMBTXRX_STP);
if (wait_master_done(adap))
return -EIO;
- data = sp->psc_smbtxrx;
- au_sync();
- buf[i] = data;
+ buf[i] = (unsigned char)(RD(adap, PSC_SMBTXRX) & 0xff);
return 0;
}
-static int
-i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
+static int i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
unsigned int len)
{
- int i;
- u32 data;
- volatile psc_smb_t *sp;
+ int i;
+ unsigned long data;
if (len == 0)
return 0;
- sp = (volatile psc_smb_t *)(adap->psc_base);
-
i = 0;
while (i < (len-1)) {
data = buf[i];
- sp->psc_smbtxrx = data;
- au_sync();
+ WR(adap, PSC_SMBTXRX, data);
if (wait_ack(adap))
return -EIO;
i++;
}
- /* The last byte has to indicate transfer done.
- */
+ /* The last byte has to indicate transfer done. */
data = buf[i];
data |= PSC_SMBTXRX_STP;
- sp->psc_smbtxrx = data;
- au_sync();
+ WR(adap, PSC_SMBTXRX, data);
if (wait_master_done(adap))
return -EIO;
return 0;
@@ -269,12 +228,10 @@
au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
{
struct i2c_au1550_data *adap = i2c_adap->algo_data;
- volatile psc_smb_t *sp = (volatile psc_smb_t *)adap->psc_base;
struct i2c_msg *p;
int i, err = 0;
- sp->psc_ctrl = PSC_CTRL_ENABLE;
- au_sync();
+ WR(adap, PSC_CTRL, PSC_CTRL_ENABLE);
for (i = 0; !err && i < num; i++) {
p = &msgs[i];
@@ -293,14 +250,12 @@
if (err == 0)
err = num;
- sp->psc_ctrl = PSC_CTRL_SUSPEND;
- au_sync();
+ WR(adap, PSC_CTRL, PSC_CTRL_SUSPEND);
return err;
}
-static u32
-au1550_func(struct i2c_adapter *adap)
+static u32 au1550_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
@@ -312,57 +267,45 @@
static void i2c_au1550_setup(struct i2c_au1550_data *priv)
{
- volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
- u32 stat;
+ unsigned long cfg;
- sp->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
- sp->psc_sel = PSC_SEL_PS_SMBUSMODE;
- sp->psc_smbcfg = 0;
- au_sync();
- sp->psc_ctrl = PSC_CTRL_ENABLE;
- au_sync();
- do {
- stat = sp->psc_smbstat;
- au_sync();
- } while ((stat & PSC_SMBSTAT_SR) == 0);
+ WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
+ WR(priv, PSC_SEL, PSC_SEL_PS_SMBUSMODE);
+ WR(priv, PSC_SMBCFG, 0);
+ WR(priv, PSC_CTRL, PSC_CTRL_ENABLE);
+ while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+ cpu_relax();
- sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 |
- PSC_SMBCFG_DD_DISABLE);
+ cfg = PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | PSC_SMBCFG_DD_DISABLE;
+ WR(priv, PSC_SMBCFG, cfg);
/* Divide by 8 to get a 6.25 MHz clock. The later protocol
* timings are based on this clock.
*/
- sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
- sp->psc_smbmsk = PSC_SMBMSK_ALLMASK;
- au_sync();
+ cfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
+ WR(priv, PSC_SMBCFG, cfg);
+ WR(priv, PSC_SMBMSK, PSC_SMBMSK_ALLMASK);
/* Set the protocol timer values. See Table 71 in the
* Au1550 Data Book for standard timing values.
*/
- sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
+ WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
- PSC_SMBTMR_SET_CH(15);
- au_sync();
+ PSC_SMBTMR_SET_CH(15));
- sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE;
- do {
- stat = sp->psc_smbstat;
- au_sync();
- } while ((stat & PSC_SMBSTAT_SR) == 0);
+ cfg |= PSC_SMBCFG_DE_ENABLE;
+ WR(priv, PSC_SMBCFG, cfg);
+ while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
+ cpu_relax();
- sp->psc_ctrl = PSC_CTRL_SUSPEND;
- au_sync();
+ WR(priv, PSC_CTRL, PSC_CTRL_SUSPEND);
}
static void i2c_au1550_disable(struct i2c_au1550_data *priv)
{
- volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base;
-
- sp->psc_smbcfg = 0;
- sp->psc_ctrl = PSC_CTRL_DISABLE;
- au_sync();
+ WR(priv, PSC_SMBCFG, 0);
+ WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
}
/*
@@ -396,9 +339,12 @@
goto out_mem;
}
- priv->psc_base = CKSEG1ADDR(r->start);
+ priv->psc_base = ioremap(r->start, resource_size(r));
+ if (!priv->psc_base) {
+ ret = -EIO;
+ goto out_map;
+ }
priv->xfer_timeout = 200;
- priv->ack_timeout = 200;
priv->adap.nr = pdev->id;
priv->adap.algo = &au1550_algo;
@@ -406,8 +352,7 @@
priv->adap.dev.parent = &pdev->dev;
strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
- /* Now, set up the PSC for SMBus PIO mode.
- */
+ /* Now, set up the PSC for SMBus PIO mode. */
i2c_au1550_setup(priv);
ret = i2c_add_numbered_adapter(&priv->adap);
@@ -417,7 +362,8 @@
}
i2c_au1550_disable(priv);
-
+ iounmap(priv->psc_base);
+out_map:
release_resource(priv->ioarea);
kfree(priv->ioarea);
out_mem:
@@ -426,14 +372,14 @@
return ret;
}
-static int __devexit
-i2c_au1550_remove(struct platform_device *pdev)
+static int __devexit i2c_au1550_remove(struct platform_device *pdev)
{
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
i2c_del_adapter(&priv->adap);
i2c_au1550_disable(priv);
+ iounmap(priv->psc_base);
release_resource(priv->ioarea);
kfree(priv->ioarea);
kfree(priv);
@@ -441,49 +387,51 @@
}
#ifdef CONFIG_PM
-static int
-i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state)
+static int i2c_au1550_suspend(struct device *dev)
{
- struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ struct i2c_au1550_data *priv = dev_get_drvdata(dev);
i2c_au1550_disable(priv);
return 0;
}
-static int
-i2c_au1550_resume(struct platform_device *pdev)
+static int i2c_au1550_resume(struct device *dev)
{
- struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
+ struct i2c_au1550_data *priv = dev_get_drvdata(dev);
i2c_au1550_setup(priv);
return 0;
}
+
+static const struct dev_pm_ops i2c_au1550_pmops = {
+ .suspend = i2c_au1550_suspend,
+ .resume = i2c_au1550_resume,
+};
+
+#define AU1XPSC_SMBUS_PMOPS (&i2c_au1550_pmops)
+
#else
-#define i2c_au1550_suspend NULL
-#define i2c_au1550_resume NULL
+#define AU1XPSC_SMBUS_PMOPS NULL
#endif
static struct platform_driver au1xpsc_smbus_driver = {
.driver = {
.name = "au1xpsc_smbus",
.owner = THIS_MODULE,
+ .pm = AU1XPSC_SMBUS_PMOPS,
},
.probe = i2c_au1550_probe,
.remove = __devexit_p(i2c_au1550_remove),
- .suspend = i2c_au1550_suspend,
- .resume = i2c_au1550_resume,
};
-static int __init
-i2c_au1550_init(void)
+static int __init i2c_au1550_init(void)
{
return platform_driver_register(&au1xpsc_smbus_driver);
}
-static void __exit
-i2c_au1550_exit(void)
+static void __exit i2c_au1550_exit(void)
{
platform_driver_unregister(&au1xpsc_smbus_driver);
}
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index cbc98ae..cdb59e5 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -631,7 +631,7 @@
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
- IRQF_DISABLED, pdev->name, iface);
+ 0, pdev->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
return -ENODEV;
@@ -702,7 +702,7 @@
}
rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
- IRQF_DISABLED, pdev->name, iface);
+ 0, pdev->name, iface);
if (rc) {
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
rc = -ENODEV;
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware-core.c
similarity index 65%
rename from drivers/i2c/busses/i2c-designware.c
rename to drivers/i2c/busses/i2c-designware-core.c
index 1b42b50..df87992 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -25,18 +25,15 @@
* ----------------------------------------------------------------------------
*
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
#include <linux/clk.h>
#include <linux/errno.h>
-#include <linux/sched.h>
#include <linux/err.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
-#include <linux/platform_device.h>
#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include "i2c-designware-core.h"
/*
* Registers offset
@@ -68,15 +65,10 @@
#define DW_IC_STATUS 0x70
#define DW_IC_TXFLR 0x74
#define DW_IC_RXFLR 0x78
-#define DW_IC_COMP_PARAM_1 0xf4
#define DW_IC_TX_ABRT_SOURCE 0x80
-
-#define DW_IC_CON_MASTER 0x1
-#define DW_IC_CON_SPEED_STD 0x2
-#define DW_IC_CON_SPEED_FAST 0x4
-#define DW_IC_CON_10BITADDR_MASTER 0x10
-#define DW_IC_CON_RESTART_EN 0x20
-#define DW_IC_CON_SLAVE_DISABLE 0x40
+#define DW_IC_COMP_PARAM_1 0xf4
+#define DW_IC_COMP_TYPE 0xfc
+#define DW_IC_COMP_TYPE_VALUE 0x44570140
#define DW_IC_INTR_RX_UNDER 0x001
#define DW_IC_INTR_RX_OVER 0x002
@@ -170,55 +162,23 @@
"lost arbitration",
};
-/**
- * struct dw_i2c_dev - private i2c-designware data
- * @dev: driver model device node
- * @base: IO registers pointer
- * @cmd_complete: tx completion indicator
- * @lock: protect this struct and IO registers
- * @clk: input reference clock
- * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transferred
- * @msgs_num: the number of elements in msgs
- * @msg_write_idx: the element index of the current tx message in the msgs
- * array
- * @tx_buf_len: the length of the current tx buffer
- * @tx_buf: the current tx buffer
- * @msg_read_idx: the element index of the current rx message in the msgs
- * array
- * @rx_buf_len: the length of the current rx buffer
- * @rx_buf: the current rx buffer
- * @msg_err: error status of the current transfer
- * @status: i2c master status, one of STATUS_*
- * @abort_source: copy of the TX_ABRT_SOURCE register
- * @irq: interrupt number for the i2c master
- * @adapter: i2c subsystem adapter node
- * @tx_fifo_depth: depth of the hardware tx fifo
- * @rx_fifo_depth: depth of the hardware rx fifo
- */
-struct dw_i2c_dev {
- struct device *dev;
- void __iomem *base;
- struct completion cmd_complete;
- struct mutex lock;
- struct clk *clk;
- int cmd_err;
- struct i2c_msg *msgs;
- int msgs_num;
- int msg_write_idx;
- u32 tx_buf_len;
- u8 *tx_buf;
- int msg_read_idx;
- u32 rx_buf_len;
- u8 *rx_buf;
- int msg_err;
- unsigned int status;
- u32 abort_source;
- int irq;
- struct i2c_adapter adapter;
- unsigned int tx_fifo_depth;
- unsigned int rx_fifo_depth;
-};
+u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+ u32 value = readl(dev->base + offset);
+
+ if (dev->swab)
+ return swab32(value);
+ else
+ return value;
+}
+
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+ if (dev->swab)
+ b = swab32(b);
+
+ writel(b, dev->base + offset);
+}
static u32
i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
@@ -283,13 +243,29 @@
* This function is called during I2C init function, and in case of timeout at
* run time.
*/
-static void i2c_dw_init(struct dw_i2c_dev *dev)
+int i2c_dw_init(struct dw_i2c_dev *dev)
{
- u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
- u32 ic_con, hcnt, lcnt;
+ u32 input_clock_khz;
+ u32 hcnt, lcnt;
+ u32 reg;
+
+ input_clock_khz = dev->get_clk_rate_khz(dev);
+
+ /* Configure register endianess access */
+ reg = dw_readl(dev, DW_IC_COMP_TYPE);
+ if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+ dev->swab = 1;
+ reg = DW_IC_COMP_TYPE_VALUE;
+ }
+
+ if (reg != DW_IC_COMP_TYPE_VALUE) {
+ dev_err(dev->dev, "Unknown Synopsys component type: "
+ "0x%08x\n", reg);
+ return -ENODEV;
+ }
/* Disable the adapter */
- writel(0, dev->base + DW_IC_ENABLE);
+ dw_writel(dev, 0, DW_IC_ENABLE);
/* set standard and fast speed deviders for high/low periods */
@@ -303,8 +279,8 @@
47, /* tLOW = 4.7 us */
3, /* tf = 0.3 us */
0); /* No offset */
- writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT);
- writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT);
+ dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
/* Fast-mode */
@@ -317,18 +293,17 @@
13, /* tLOW = 1.3 us */
3, /* tf = 0.3 us */
0); /* No offset */
- writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT);
- writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT);
+ dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+ dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
/* Configure Tx/Rx FIFO threshold levels */
- writel(dev->tx_fifo_depth - 1, dev->base + DW_IC_TX_TL);
- writel(0, dev->base + DW_IC_RX_TL);
+ dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+ dw_writel(dev, 0, DW_IC_RX_TL);
/* configure the i2c master */
- ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
- DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
- writel(ic_con, dev->base + DW_IC_CON);
+ dw_writel(dev, dev->master_cfg , DW_IC_CON);
+ return 0;
}
/*
@@ -338,7 +313,7 @@
{
int timeout = TIMEOUT;
- while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+ while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
if (timeout <= 0) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
return -ETIMEDOUT;
@@ -356,24 +331,24 @@
u32 ic_con;
/* Disable the adapter */
- writel(0, dev->base + DW_IC_ENABLE);
+ dw_writel(dev, 0, DW_IC_ENABLE);
/* set the slave (target) address */
- writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+ dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
/* if the slave address is ten bit address, enable 10BITADDR */
- ic_con = readl(dev->base + DW_IC_CON);
+ ic_con = dw_readl(dev, DW_IC_CON);
if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
ic_con |= DW_IC_CON_10BITADDR_MASTER;
else
ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
- writel(ic_con, dev->base + DW_IC_CON);
+ dw_writel(dev, ic_con, DW_IC_CON);
/* Enable the adapter */
- writel(1, dev->base + DW_IC_ENABLE);
+ dw_writel(dev, 1, DW_IC_ENABLE);
/* Enable interrupts */
- writel(DW_IC_INTR_DEFAULT_MASK, dev->base + DW_IC_INTR_MASK);
+ dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
}
/*
@@ -382,7 +357,7 @@
* messages into the tx buffer. Even if the size of i2c_msg data is
* longer than the size of the tx buffer, it handles everything.
*/
-static void
+void
i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
{
struct i2c_msg *msgs = dev->msgs;
@@ -420,15 +395,15 @@
buf_len = msgs[dev->msg_write_idx].len;
}
- tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
- rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+ tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
+ rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR);
while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
- writel(0x100, dev->base + DW_IC_DATA_CMD);
+ dw_writel(dev, 0x100, DW_IC_DATA_CMD);
rx_limit--;
} else
- writel(*buf++, dev->base + DW_IC_DATA_CMD);
+ dw_writel(dev, *buf++, DW_IC_DATA_CMD);
tx_limit--; buf_len--;
}
@@ -453,7 +428,7 @@
if (dev->msg_err)
intr_mask = 0;
- writel(intr_mask, dev->base + DW_IC_INTR_MASK);
+ dw_writel(dev, intr_mask, DW_IC_INTR_MASK);
}
static void
@@ -477,10 +452,10 @@
buf = dev->rx_buf;
}
- rx_valid = readl(dev->base + DW_IC_RXFLR);
+ rx_valid = dw_readl(dev, DW_IC_RXFLR);
for (; len > 0 && rx_valid > 0; len--, rx_valid--)
- *buf++ = readl(dev->base + DW_IC_DATA_CMD);
+ *buf++ = dw_readl(dev, DW_IC_DATA_CMD);
if (len > 0) {
dev->status |= STATUS_READ_IN_PROGRESS;
@@ -518,7 +493,7 @@
/*
* Prepare controller for a transaction and call i2c_dw_xfer_msg
*/
-static int
+int
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
@@ -527,6 +502,7 @@
dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num);
mutex_lock(&dev->lock);
+ pm_runtime_get_sync(dev->dev);
INIT_COMPLETION(dev->cmd_complete);
dev->msgs = msgs;
@@ -563,7 +539,7 @@
/* no error */
if (likely(!dev->cmd_err)) {
/* Disable the adapter */
- writel(0, dev->base + DW_IC_ENABLE);
+ dw_writel(dev, 0, DW_IC_ENABLE);
ret = num;
goto done;
}
@@ -576,19 +552,16 @@
ret = -EIO;
done:
+ pm_runtime_put(dev->dev);
mutex_unlock(&dev->lock);
return ret;
}
-static u32 i2c_dw_func(struct i2c_adapter *adap)
+u32 i2c_dw_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C |
- I2C_FUNC_10BIT_ADDR |
- I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_I2C_BLOCK;
+ struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+ return dev->functionality;
}
static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
@@ -601,47 +574,47 @@
* in the IC_RAW_INTR_STAT register.
*
* That is,
- * stat = readl(IC_INTR_STAT);
+ * stat = dw_readl(IC_INTR_STAT);
* equals to,
- * stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
+ * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
*
* The raw version might be useful for debugging purposes.
*/
- stat = readl(dev->base + DW_IC_INTR_STAT);
+ stat = dw_readl(dev, DW_IC_INTR_STAT);
/*
* Do not use the IC_CLR_INTR register to clear interrupts, or
* you'll miss some interrupts, triggered during the period from
- * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
+ * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
*
* Instead, use the separately-prepared IC_CLR_* registers.
*/
if (stat & DW_IC_INTR_RX_UNDER)
- readl(dev->base + DW_IC_CLR_RX_UNDER);
+ dw_readl(dev, DW_IC_CLR_RX_UNDER);
if (stat & DW_IC_INTR_RX_OVER)
- readl(dev->base + DW_IC_CLR_RX_OVER);
+ dw_readl(dev, DW_IC_CLR_RX_OVER);
if (stat & DW_IC_INTR_TX_OVER)
- readl(dev->base + DW_IC_CLR_TX_OVER);
+ dw_readl(dev, DW_IC_CLR_TX_OVER);
if (stat & DW_IC_INTR_RD_REQ)
- readl(dev->base + DW_IC_CLR_RD_REQ);
+ dw_readl(dev, DW_IC_CLR_RD_REQ);
if (stat & DW_IC_INTR_TX_ABRT) {
/*
* The IC_TX_ABRT_SOURCE register is cleared whenever
* the IC_CLR_TX_ABRT is read. Preserve it beforehand.
*/
- dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
- readl(dev->base + DW_IC_CLR_TX_ABRT);
+ dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE);
+ dw_readl(dev, DW_IC_CLR_TX_ABRT);
}
if (stat & DW_IC_INTR_RX_DONE)
- readl(dev->base + DW_IC_CLR_RX_DONE);
+ dw_readl(dev, DW_IC_CLR_RX_DONE);
if (stat & DW_IC_INTR_ACTIVITY)
- readl(dev->base + DW_IC_CLR_ACTIVITY);
+ dw_readl(dev, DW_IC_CLR_ACTIVITY);
if (stat & DW_IC_INTR_STOP_DET)
- readl(dev->base + DW_IC_CLR_STOP_DET);
+ dw_readl(dev, DW_IC_CLR_STOP_DET);
if (stat & DW_IC_INTR_START_DET)
- readl(dev->base + DW_IC_CLR_START_DET);
+ dw_readl(dev, DW_IC_CLR_START_DET);
if (stat & DW_IC_INTR_GEN_CALL)
- readl(dev->base + DW_IC_CLR_GEN_CALL);
+ dw_readl(dev, DW_IC_CLR_GEN_CALL);
return stat;
}
@@ -650,13 +623,19 @@
* Interrupt service routine. This gets called whenever an I2C interrupt
* occurs.
*/
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
{
struct dw_i2c_dev *dev = dev_id;
- u32 stat;
+ u32 stat, enabled;
+
+ enabled = dw_readl(dev, DW_IC_ENABLE);
+ stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+ dev_dbg(dev->dev, "%s: %s enabled= 0x%x stat=0x%x\n", __func__,
+ dev->adapter.name, enabled, stat);
+ if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+ return IRQ_NONE;
stat = i2c_dw_read_clear_intrbits(dev);
- dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
if (stat & DW_IC_INTR_TX_ABRT) {
dev->cmd_err |= DW_IC_ERR_TX_ABRT;
@@ -666,7 +645,7 @@
* Anytime TX_ABRT is set, the contents of the tx/rx
* buffers are flushed. Make sure to skip them.
*/
- writel(0, dev->base + DW_IC_INTR_MASK);
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
goto tx_aborted;
}
@@ -689,159 +668,38 @@
return IRQ_HANDLED;
}
-static struct i2c_algorithm i2c_dw_algo = {
- .master_xfer = i2c_dw_xfer,
- .functionality = i2c_dw_func,
-};
-
-static int __devinit dw_i2c_probe(struct platform_device *pdev)
+void i2c_dw_enable(struct dw_i2c_dev *dev)
{
- struct dw_i2c_dev *dev;
- struct i2c_adapter *adap;
- struct resource *mem, *ioarea;
- int irq, r;
-
- /* NOTE: driver uses the static register mapping */
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -EINVAL;
- }
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "no irq resource?\n");
- return irq; /* -ENXIO */
- }
-
- ioarea = request_mem_region(mem->start, resource_size(mem),
- pdev->name);
- if (!ioarea) {
- dev_err(&pdev->dev, "I2C region already claimed\n");
- return -EBUSY;
- }
-
- dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
- if (!dev) {
- r = -ENOMEM;
- goto err_release_region;
- }
-
- init_completion(&dev->cmd_complete);
- mutex_init(&dev->lock);
- dev->dev = get_device(&pdev->dev);
- dev->irq = irq;
- platform_set_drvdata(pdev, dev);
-
- dev->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(dev->clk)) {
- r = -ENODEV;
- goto err_free_mem;
- }
- clk_enable(dev->clk);
-
- dev->base = ioremap(mem->start, resource_size(mem));
- if (dev->base == NULL) {
- dev_err(&pdev->dev, "failure mapping io resources\n");
- r = -EBUSY;
- goto err_unuse_clocks;
- }
- {
- u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1);
-
- dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
- dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
- }
- i2c_dw_init(dev);
-
- writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
- r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
- if (r) {
- dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
- goto err_iounmap;
- }
-
- adap = &dev->adapter;
- i2c_set_adapdata(adap, dev);
- adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON;
- strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
- sizeof(adap->name));
- adap->algo = &i2c_dw_algo;
- adap->dev.parent = &pdev->dev;
-
- adap->nr = pdev->id;
- r = i2c_add_numbered_adapter(adap);
- if (r) {
- dev_err(&pdev->dev, "failure adding adapter\n");
- goto err_free_irq;
- }
-
- return 0;
-
-err_free_irq:
- free_irq(dev->irq, dev);
-err_iounmap:
- iounmap(dev->base);
-err_unuse_clocks:
- clk_disable(dev->clk);
- clk_put(dev->clk);
- dev->clk = NULL;
-err_free_mem:
- platform_set_drvdata(pdev, NULL);
- put_device(&pdev->dev);
- kfree(dev);
-err_release_region:
- release_mem_region(mem->start, resource_size(mem));
-
- return r;
+ /* Enable the adapter */
+ dw_writel(dev, 1, DW_IC_ENABLE);
}
-static int __devexit dw_i2c_remove(struct platform_device *pdev)
+u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
{
- struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
- struct resource *mem;
-
- platform_set_drvdata(pdev, NULL);
- i2c_del_adapter(&dev->adapter);
- put_device(&pdev->dev);
-
- clk_disable(dev->clk);
- clk_put(dev->clk);
- dev->clk = NULL;
-
- writel(0, dev->base + DW_IC_ENABLE);
- free_irq(dev->irq, dev);
- kfree(dev);
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(mem->start, resource_size(mem));
- return 0;
+ return dw_readl(dev, DW_IC_ENABLE);
}
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:i2c_designware");
-
-static struct platform_driver dw_i2c_driver = {
- .remove = __devexit_p(dw_i2c_remove),
- .driver = {
- .name = "i2c_designware",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init dw_i2c_init_driver(void)
+void i2c_dw_disable(struct dw_i2c_dev *dev)
{
- return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
-}
-module_init(dw_i2c_init_driver);
+ /* Disable controller */
+ dw_writel(dev, 0, DW_IC_ENABLE);
-static void __exit dw_i2c_exit_driver(void)
+ /* Disable all interupts */
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+ dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_clear_int(struct dw_i2c_dev *dev)
{
- platform_driver_unregister(&dw_i2c_driver);
+ dw_readl(dev, DW_IC_CLR_INTR);
}
-module_exit(dw_i2c_exit_driver);
-MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
-MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
-MODULE_LICENSE("GPL");
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+ dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+ return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
new file mode 100644
index 0000000..02d1a2d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -0,0 +1,105 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+
+#define DW_IC_CON_MASTER 0x1
+#define DW_IC_CON_SPEED_STD 0x2
+#define DW_IC_CON_SPEED_FAST 0x4
+#define DW_IC_CON_10BITADDR_MASTER 0x10
+#define DW_IC_CON_RESTART_EN 0x20
+#define DW_IC_CON_SLAVE_DISABLE 0x40
+
+
+/**
+ * struct dw_i2c_dev - private i2c-designware data
+ * @dev: driver model device node
+ * @base: IO registers pointer
+ * @cmd_complete: tx completion indicator
+ * @lock: protect this struct and IO registers
+ * @clk: input reference clock
+ * @cmd_err: run time hadware error code
+ * @msgs: points to an array of messages currently being transfered
+ * @msgs_num: the number of elements in msgs
+ * @msg_write_idx: the element index of the current tx message in the msgs
+ * array
+ * @tx_buf_len: the length of the current tx buffer
+ * @tx_buf: the current tx buffer
+ * @msg_read_idx: the element index of the current rx message in the msgs
+ * array
+ * @rx_buf_len: the length of the current rx buffer
+ * @rx_buf: the current rx buffer
+ * @msg_err: error status of the current transfer
+ * @status: i2c master status, one of STATUS_*
+ * @abort_source: copy of the TX_ABRT_SOURCE register
+ * @irq: interrupt number for the i2c master
+ * @adapter: i2c subsystem adapter node
+ * @tx_fifo_depth: depth of the hardware tx fifo
+ * @rx_fifo_depth: depth of the hardware rx fifo
+ */
+struct dw_i2c_dev {
+ struct device *dev;
+ void __iomem *base;
+ struct completion cmd_complete;
+ struct mutex lock;
+ struct clk *clk;
+ u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
+ struct dw_pci_controller *controller;
+ int cmd_err;
+ struct i2c_msg *msgs;
+ int msgs_num;
+ int msg_write_idx;
+ u32 tx_buf_len;
+ u8 *tx_buf;
+ int msg_read_idx;
+ u32 rx_buf_len;
+ u8 *rx_buf;
+ int msg_err;
+ unsigned int status;
+ u32 abort_source;
+ int irq;
+ int swab;
+ struct i2c_adapter adapter;
+ u32 functionality;
+ u32 master_cfg;
+ unsigned int tx_fifo_depth;
+ unsigned int rx_fifo_depth;
+};
+
+extern u32 dw_readl(struct dw_i2c_dev *dev, int offset);
+extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
+extern int i2c_dw_init(struct dw_i2c_dev *dev);
+extern int i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+ int num);
+extern u32 i2c_dw_func(struct i2c_adapter *adap);
+extern irqreturn_t i2c_dw_isr(int this_irq, void *dev_id);
+extern void i2c_dw_enable(struct dw_i2c_dev *dev);
+extern u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable(struct dw_i2c_dev *dev);
+extern void i2c_dw_clear_int(struct dw_i2c_dev *dev);
+extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
new file mode 100644
index 0000000..9e89e73
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -0,0 +1,392 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ * Copyright (C) 2011 Intel corporation.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include "i2c-designware-core.h"
+
+#define DRIVER_NAME "i2c-designware-pci"
+
+enum dw_pci_ctl_id_t {
+ moorestown_0,
+ moorestown_1,
+ moorestown_2,
+
+ medfield_0,
+ medfield_1,
+ medfield_2,
+ medfield_3,
+ medfield_4,
+ medfield_5,
+};
+
+struct dw_pci_controller {
+ u32 bus_num;
+ u32 bus_cfg;
+ u32 tx_fifo_depth;
+ u32 rx_fifo_depth;
+ u32 clk_khz;
+};
+
+#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
+ DW_IC_CON_SLAVE_DISABLE | \
+ DW_IC_CON_RESTART_EN)
+
+static struct dw_pci_controller dw_pci_controllers[] = {
+ [moorestown_0] = {
+ .bus_num = 0,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [moorestown_1] = {
+ .bus_num = 1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [moorestown_2] = {
+ .bus_num = 2,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_0] = {
+ .bus_num = 0,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_1] = {
+ .bus_num = 1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_2] = {
+ .bus_num = 2,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_3] = {
+ .bus_num = 3,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_4] = {
+ .bus_num = 4,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+ [medfield_5] = {
+ .bus_num = 5,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 25000,
+ },
+};
+static struct i2c_algorithm i2c_dw_algo = {
+ .master_xfer = i2c_dw_xfer,
+ .functionality = i2c_dw_func,
+};
+
+static int i2c_dw_pci_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
+ int err;
+
+
+ i2c_dw_disable(i2c);
+
+ err = pci_save_state(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_save_state failed\n");
+ return err;
+ }
+
+ err = pci_set_power_state(pdev, PCI_D3hot);
+ if (err) {
+ dev_err(&pdev->dev, "pci_set_power_state failed\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int i2c_dw_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
+ int err;
+ u32 enabled;
+
+ enabled = i2c_dw_is_enabled(i2c);
+ if (enabled)
+ return 0;
+
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err) {
+ dev_err(&pdev->dev, "pci_set_power_state() failed\n");
+ return err;
+ }
+
+ pci_restore_state(pdev);
+
+ i2c_dw_init(i2c);
+ i2c_dw_enable(i2c);
+ return 0;
+}
+
+static int i2c_dw_pci_runtime_idle(struct device *dev)
+{
+ int err = pm_schedule_suspend(dev, 500);
+ dev_dbg(dev, "runtime_idle called\n");
+
+ if (err != 0)
+ return 0;
+ return -EBUSY;
+}
+
+static const struct dev_pm_ops i2c_dw_pm_ops = {
+ .resume = i2c_dw_pci_resume,
+ .suspend = i2c_dw_pci_suspend,
+ SET_RUNTIME_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume,
+ i2c_dw_pci_runtime_idle)
+};
+
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return dev->controller->clk_khz;
+}
+
+static int __devinit i2c_dw_pci_probe(struct pci_dev *pdev,
+const struct pci_device_id *id)
+{
+ struct dw_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ unsigned long start, len;
+ void __iomem *base;
+ int r;
+ struct dw_pci_controller *controller;
+
+ if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
+ printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n",
+ id->driver_data);
+ return -EINVAL;
+ }
+
+ controller = &dw_pci_controllers[id->driver_data];
+
+ r = pci_enable_device(pdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
+ r);
+ goto exit;
+ }
+
+ /* Determine the address of the I2C area */
+ start = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ if (!start || len == 0) {
+ dev_err(&pdev->dev, "base address not set\n");
+ r = -ENODEV;
+ goto exit;
+ }
+
+ r = pci_request_region(pdev, 0, DRIVER_NAME);
+ if (r) {
+ dev_err(&pdev->dev, "failed to request I2C region "
+ "0x%lx-0x%lx\n", start,
+ (unsigned long)pci_resource_end(pdev, 0));
+ goto exit;
+ }
+
+ base = ioremap_nocache(start, len);
+ if (!base) {
+ dev_err(&pdev->dev, "I/O memory remapping failed\n");
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+
+ dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+ init_completion(&dev->cmd_complete);
+ mutex_init(&dev->lock);
+ dev->clk = NULL;
+ dev->controller = controller;
+ dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+ dev->base = base;
+ dev->dev = get_device(&pdev->dev);
+ dev->functionality =
+ I2C_FUNC_I2C |
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+ dev->master_cfg = controller->bus_cfg;
+
+ pci_set_drvdata(pdev, dev);
+
+ dev->tx_fifo_depth = controller->tx_fifo_depth;
+ dev->rx_fifo_depth = controller->rx_fifo_depth;
+ r = i2c_dw_init(dev);
+ if (r)
+ goto err_iounmap;
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = 0;
+ adap->algo = &i2c_dw_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->nr = controller->bus_num;
+ snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
+ adap->nr);
+
+ r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev);
+ if (r) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+ goto err_iounmap;
+ }
+
+ i2c_dw_disable_int(dev);
+ i2c_dw_clear_int(dev);
+ r = i2c_add_numbered_adapter(adap);
+ if (r) {
+ dev_err(&pdev->dev, "failure adding adapter\n");
+ goto err_free_irq;
+ }
+
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
+
+ return 0;
+
+err_free_irq:
+ free_irq(pdev->irq, dev);
+err_iounmap:
+ iounmap(dev->base);
+ pci_set_drvdata(pdev, NULL);
+ put_device(&pdev->dev);
+ kfree(dev);
+err_release_region:
+ pci_release_region(pdev, 0);
+exit:
+ return r;
+}
+
+static void __devexit i2c_dw_pci_remove(struct pci_dev *pdev)
+{
+ struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
+
+ i2c_dw_disable(dev);
+ pm_runtime_forbid(&pdev->dev);
+ pm_runtime_get_noresume(&pdev->dev);
+
+ pci_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&dev->adapter);
+ put_device(&pdev->dev);
+
+ free_irq(dev->irq, dev);
+ kfree(dev);
+ pci_release_region(pdev, 0);
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("i2c_designware-pci");
+
+DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
+ /* Moorestown */
+ { PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
+ { PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
+ { PCI_VDEVICE(INTEL, 0x0804), moorestown_2 },
+ /* Medfield */
+ { PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
+ { PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
+ { PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
+ { PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
+ { PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
+ { PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
+
+static struct pci_driver dw_i2c_driver = {
+ .name = DRIVER_NAME,
+ .id_table = i2_designware_pci_ids,
+ .probe = i2c_dw_pci_probe,
+ .remove = __devexit_p(i2c_dw_pci_remove),
+ .driver = {
+ .pm = &i2c_dw_pm_ops,
+ },
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+ return pci_register_driver(&dw_i2c_driver);
+}
+module_init(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+ pci_unregister_driver(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
new file mode 100644
index 0000000..2d3657a
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -0,0 +1,215 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (master only).
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "i2c-designware-core.h"
+
+static struct i2c_algorithm i2c_dw_algo = {
+ .master_xfer = i2c_dw_xfer,
+ .functionality = i2c_dw_func,
+};
+static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
+{
+ return clk_get_rate(dev->clk)/1000;
+}
+
+static int __devinit dw_i2c_probe(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ struct resource *mem, *ioarea;
+ int irq, r;
+
+ /* NOTE: driver uses the static register mapping */
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return irq; /* -ENXIO */
+ }
+
+ ioarea = request_mem_region(mem->start, resource_size(mem),
+ pdev->name);
+ if (!ioarea) {
+ dev_err(&pdev->dev, "I2C region already claimed\n");
+ return -EBUSY;
+ }
+
+ dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ r = -ENOMEM;
+ goto err_release_region;
+ }
+
+ init_completion(&dev->cmd_complete);
+ mutex_init(&dev->lock);
+ dev->dev = get_device(&pdev->dev);
+ dev->irq = irq;
+ platform_set_drvdata(pdev, dev);
+
+ dev->clk = clk_get(&pdev->dev, NULL);
+ dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
+
+ if (IS_ERR(dev->clk)) {
+ r = -ENODEV;
+ goto err_free_mem;
+ }
+ clk_enable(dev->clk);
+
+ dev->functionality =
+ I2C_FUNC_I2C |
+ I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+ dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+ DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
+
+ dev->base = ioremap(mem->start, resource_size(mem));
+ if (dev->base == NULL) {
+ dev_err(&pdev->dev, "failure mapping io resources\n");
+ r = -EBUSY;
+ goto err_unuse_clocks;
+ }
+ {
+ u32 param1 = i2c_dw_read_comp_param(dev);
+
+ dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1;
+ dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1;
+ }
+ r = i2c_dw_init(dev);
+ if (r)
+ goto err_iounmap;
+
+ i2c_dw_disable_int(dev);
+ r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
+ if (r) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
+ goto err_iounmap;
+ }
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_HWMON;
+ strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
+ sizeof(adap->name));
+ adap->algo = &i2c_dw_algo;
+ adap->dev.parent = &pdev->dev;
+
+ adap->nr = pdev->id;
+ r = i2c_add_numbered_adapter(adap);
+ if (r) {
+ dev_err(&pdev->dev, "failure adding adapter\n");
+ goto err_free_irq;
+ }
+
+ return 0;
+
+err_free_irq:
+ free_irq(dev->irq, dev);
+err_iounmap:
+ iounmap(dev->base);
+err_unuse_clocks:
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+err_free_mem:
+ platform_set_drvdata(pdev, NULL);
+ put_device(&pdev->dev);
+ kfree(dev);
+err_release_region:
+ release_mem_region(mem->start, resource_size(mem));
+
+ return r;
+}
+
+static int __devexit dw_i2c_remove(struct platform_device *pdev)
+{
+ struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+ struct resource *mem;
+
+ platform_set_drvdata(pdev, NULL);
+ i2c_del_adapter(&dev->adapter);
+ put_device(&pdev->dev);
+
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ dev->clk = NULL;
+
+ i2c_dw_disable(dev);
+ free_irq(dev->irq, dev);
+ kfree(dev);
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(mem->start, resource_size(mem));
+ return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:i2c_designware");
+
+static struct platform_driver dw_i2c_driver = {
+ .remove = __devexit_p(dw_i2c_remove),
+ .driver = {
+ .name = "i2c_designware",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init dw_i2c_init_driver(void)
+{
+ return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
+}
+module_init(dw_i2c_init_driver);
+
+static void __exit dw_i2c_exit_driver(void)
+{
+ platform_driver_unregister(&dw_i2c_driver);
+}
+module_exit(dw_i2c_exit_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index ce1a32b..8cebef4 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -64,6 +64,7 @@
#define TEN_BIT_ADDR_DEFAULT 0xF000
#define TEN_BIT_ADDR_MASK 0xF0
#define PCH_START 0x0020
+#define PCH_RESTART 0x0004
#define PCH_ESR_START 0x0001
#define PCH_BUFF_START 0x1
#define PCH_REPSTART 0x0004
@@ -273,23 +274,24 @@
s32 timeout)
{
void __iomem *p = adap->pch_base_address;
+ ktime_t ns_val;
+
+ if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
+ return 0;
/* MAX timeout value is timeout*1000*1000nsec */
- ktime_t ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
+ ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
do {
- if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
- break;
msleep(20);
+ if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
+ return 0;
} while (ktime_lt(ktime_get(), ns_val));
pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
+ pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
+ pch_i2c_init(adap);
- if (timeout == 0) {
- pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
- return -ETIME;
- }
-
- return 0;
+ return -ETIME;
}
/**
@@ -311,21 +313,19 @@
*/
static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
{
- s32 ret;
+ long ret;
ret = wait_event_timeout(pch_event,
(adap->pch_event_flag != 0), msecs_to_jiffies(50));
- if (ret < 0) {
- pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
- return ret;
- }
if (ret == 0) {
pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
+ adap->pch_event_flag = 0;
return -ETIMEDOUT;
}
if (adap->pch_event_flag & I2C_ERROR_MASK) {
pch_err(adap, "error bits set: %x\n", adap->pch_event_flag);
+ adap->pch_event_flag = 0;
return -EIO;
}
@@ -394,6 +394,7 @@
u32 addr_2_msb;
u32 addr_8_lsb;
s32 wrcount;
+ s32 rtn;
void __iomem *p = adap->pch_base_address;
length = msgs->len;
@@ -412,15 +413,29 @@
}
if (msgs->flags & I2C_M_TEN) {
- addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
+ addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7) & 0x06;
iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
if (first)
pch_i2c_start(adap);
- if (pch_i2c_wait_for_xfer_complete(adap) == 0 &&
- pch_i2c_getack(adap) == 0) {
+
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
addr_8_lsb = (addr & I2C_ADDR_MSK);
iowrite32(addr_8_lsb, p + PCH_I2CDR);
- } else {
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
pch_i2c_stop(adap);
return -ETIME;
}
@@ -431,31 +446,52 @@
pch_i2c_start(adap);
}
- if ((pch_i2c_wait_for_xfer_complete(adap) == 0) &&
- (pch_i2c_getack(adap) == 0)) {
- for (wrcount = 0; wrcount < length; ++wrcount) {
- /* write buffer value to I2C data register */
- iowrite32(buf[wrcount], p + PCH_I2CDR);
- pch_dbg(adap, "writing %x to Data register\n",
- buf[wrcount]);
-
- if (pch_i2c_wait_for_xfer_complete(adap) != 0)
- return -ETIME;
-
- if (pch_i2c_getack(adap))
- return -EIO;
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
}
-
- /* check if this is the last message */
- if (last)
- pch_i2c_stop(adap);
- else
- pch_i2c_repstart(adap);
- } else {
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
pch_i2c_stop(adap);
- return -EIO;
+ return -ETIME;
}
+ for (wrcount = 0; wrcount < length; ++wrcount) {
+ /* write buffer value to I2C data register */
+ iowrite32(buf[wrcount], p + PCH_I2CDR);
+ pch_dbg(adap, "writing %x to Data register\n", buf[wrcount]);
+
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMCF_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
+ }
+
+ /* check if this is the last message */
+ if (last)
+ pch_i2c_stop(adap);
+ else
+ pch_i2c_repstart(adap);
+
pch_dbg(adap, "return=%d\n", wrcount);
return wrcount;
@@ -484,6 +520,19 @@
}
/**
+ * pch_i2c_restart() - Generate I2C restart condition in normal mode.
+ * @adap: Pointer to struct i2c_algo_pch_data.
+ *
+ * Generate I2C restart condition in normal mode by setting I2CCTL.I2CRSTA.
+ */
+static void pch_i2c_restart(struct i2c_algo_pch_data *adap)
+{
+ void __iomem *p = adap->pch_base_address;
+ pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
+ pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_RESTART);
+}
+
+/**
* pch_i2c_readbytes() - read data from I2C bus in normal mode.
* @i2c_adap: Pointer to the struct i2c_adapter.
* @msgs: Pointer to i2c_msg structure.
@@ -500,7 +549,9 @@
u32 length;
u32 addr;
u32 addr_2_msb;
+ u32 addr_8_lsb;
void __iomem *p = adap->pch_base_address;
+ s32 rtn;
length = msgs->len;
buf = msgs->buf;
@@ -515,9 +566,55 @@
}
if (msgs->flags & I2C_M_TEN) {
- addr_2_msb = (((addr & I2C_MSB_2B_MSK) >> 7) | (I2C_RD));
+ addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
+ if (first)
+ pch_i2c_start(adap);
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ addr_8_lsb = (addr & I2C_ADDR_MSK);
+ iowrite32(addr_8_lsb, p + PCH_I2CDR);
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
+ pch_i2c_restart(adap);
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ addr_2_msb |= I2C_RD;
+ iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK,
+ p + PCH_I2CDR);
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR,
+ I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
} else {
/* 7 address bits + R/W bit */
addr = (((addr) << 1) | (I2C_RD));
@@ -528,56 +625,81 @@
if (first)
pch_i2c_start(adap);
- if ((pch_i2c_wait_for_xfer_complete(adap) == 0) &&
- (pch_i2c_getack(adap) == 0)) {
- pch_dbg(adap, "return %d\n", 0);
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave address"
+ "setting\n");
+ return -EIO;
+ }
+ } else if (rtn == -EIO) { /* Arbitration Lost */
+ pch_err(adap, "Lost Arbitration\n");
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMAL_BIT);
+ pch_clrbit(adap->pch_base_address, PCH_I2CSR, I2CMIF_BIT);
+ pch_i2c_init(adap);
+ return -EAGAIN;
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
+ }
- if (length == 0) {
- pch_i2c_stop(adap);
- ioread32(p + PCH_I2CDR); /* Dummy read needs */
+ if (length == 0) {
+ pch_i2c_stop(adap);
+ ioread32(p + PCH_I2CDR); /* Dummy read needs */
- count = length;
- } else {
- int read_index;
- int loop;
- pch_i2c_sendack(adap);
+ count = length;
+ } else {
+ int read_index;
+ int loop;
+ pch_i2c_sendack(adap);
- /* Dummy read */
- for (loop = 1, read_index = 0; loop < length; loop++) {
- buf[read_index] = ioread32(p + PCH_I2CDR);
-
- if (loop != 1)
- read_index++;
-
- if (pch_i2c_wait_for_xfer_complete(adap) != 0) {
- pch_i2c_stop(adap);
- return -ETIME;
- }
- } /* end for */
-
- pch_i2c_sendnack(adap);
-
+ /* Dummy read */
+ for (loop = 1, read_index = 0; loop < length; loop++) {
buf[read_index] = ioread32(p + PCH_I2CDR);
- if (length != 1)
+ if (loop != 1)
read_index++;
- if (pch_i2c_wait_for_xfer_complete(adap) == 0) {
- if (last)
- pch_i2c_stop(adap);
- else
- pch_i2c_repstart(adap);
-
- buf[read_index++] = ioread32(p + PCH_I2CDR);
- count = read_index;
- } else {
- count = -ETIME;
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave"
+ "address setting\n");
+ return -EIO;
+ }
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
}
+ } /* end for */
+
+ pch_i2c_sendnack(adap);
+
+ buf[read_index] = ioread32(p + PCH_I2CDR); /* Read final - 1 */
+
+ if (length != 1)
+ read_index++;
+
+ rtn = pch_i2c_wait_for_xfer_complete(adap);
+ if (rtn == 0) {
+ if (pch_i2c_getack(adap)) {
+ pch_dbg(adap, "Receive NACK for slave"
+ "address setting\n");
+ return -EIO;
+ }
+ } else { /* wait-event timeout */
+ pch_i2c_stop(adap);
+ return -ETIME;
}
- } else {
- count = -ETIME;
- pch_i2c_stop(adap);
+
+ if (last)
+ pch_i2c_stop(adap);
+ else
+ pch_i2c_repstart(adap);
+
+ buf[read_index++] = ioread32(p + PCH_I2CDR); /* Read Final */
+ count = read_index;
}
return count;
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
index 3876a24..63bb1cc 100644
--- a/drivers/i2c/busses/i2c-highlander.c
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -387,7 +387,7 @@
dev->irq = 0;
if (dev->irq) {
- ret = request_irq(dev->irq, highlander_i2c_irq, IRQF_DISABLED,
+ ret = request_irq(dev->irq, highlander_i2c_irq, 0,
pdev->name, dev);
if (unlikely(ret))
goto err_unmap;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 4c2a62b..58832e5 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -48,6 +48,9 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_i2c.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
@@ -125,6 +128,11 @@
unsigned int ifdr; /* IMX_I2C_IFDR */
};
+static const struct of_device_id i2c_imx_dt_ids[] = {
+ { .compatible = "fsl,imx1-i2c", },
+ { /* sentinel */ }
+};
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -466,10 +474,10 @@
{
struct imx_i2c_struct *i2c_imx;
struct resource *res;
- struct imxi2c_platform_data *pdata;
+ struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
void __iomem *base;
resource_size_t res_size;
- int irq;
+ int irq, bitrate;
int ret;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
@@ -485,19 +493,11 @@
return -ENOENT;
}
- pdata = pdev->dev.platform_data;
-
- if (pdata && pdata->init) {
- ret = pdata->init(&pdev->dev);
- if (ret)
- return ret;
- }
-
res_size = resource_size(res);
if (!request_mem_region(res->start, res_size, DRIVER_NAME)) {
- ret = -EBUSY;
- goto fail0;
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ return -EBUSY;
}
base = ioremap(res->start, res_size);
@@ -520,6 +520,7 @@
i2c_imx->adapter.algo = &i2c_imx_algo;
i2c_imx->adapter.dev.parent = &pdev->dev;
i2c_imx->adapter.nr = pdev->id;
+ i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->irq = irq;
i2c_imx->base = base;
i2c_imx->res = res;
@@ -546,10 +547,12 @@
i2c_set_adapdata(&i2c_imx->adapter, i2c_imx);
/* Set up clock divider */
- if (pdata && pdata->bitrate)
- i2c_imx_set_clk(i2c_imx, pdata->bitrate);
- else
- i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE);
+ bitrate = IMX_I2C_BIT_RATE;
+ ret = of_property_read_u32(pdev->dev.of_node,
+ "clock-frequency", &bitrate);
+ if (ret < 0 && pdata && pdata->bitrate)
+ bitrate = pdata->bitrate;
+ i2c_imx_set_clk(i2c_imx, bitrate);
/* Set up chip registers to defaults */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
@@ -562,6 +565,8 @@
goto fail5;
}
+ of_i2c_register_devices(&i2c_imx->adapter);
+
/* Set up platform driver data */
platform_set_drvdata(pdev, i2c_imx);
@@ -586,16 +591,12 @@
iounmap(base);
fail1:
release_mem_region(res->start, resource_size(res));
-fail0:
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
return ret; /* Return error number */
}
static int __exit i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
/* remove adapter */
dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n");
@@ -611,10 +612,6 @@
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- /* Shut down hardware */
- if (pdata && pdata->exit)
- pdata->exit(&pdev->dev);
-
clk_put(i2c_imx->clk);
iounmap(i2c_imx->base);
@@ -628,6 +625,7 @@
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = i2c_imx_dt_ids,
}
};
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index b228e09..5267ab9 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -63,11 +63,11 @@
/* Master controller (MCR) register */
#define I2C_MCR_OP (0x1 << 0) /* Operation */
#define I2C_MCR_A7 (0x7f << 1) /* 7-bit address */
-#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
+#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
#define I2C_MCR_SB (0x1 << 11) /* Extended address */
#define I2C_MCR_AM (0x3 << 12) /* Address type */
-#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
-#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
+#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
+#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
/* Status register (SR) */
#define I2C_SR_OP (0x3 << 0) /* Operation */
@@ -77,7 +77,7 @@
#define I2C_SR_LENGTH (0x7ff << 9) /* Transfer length */
/* Interrupt mask set/clear (IMSCR) bits */
-#define I2C_IT_TXFE (0x1 << 0)
+#define I2C_IT_TXFE (0x1 << 0)
#define I2C_IT_TXFNE (0x1 << 1)
#define I2C_IT_TXFF (0x1 << 2)
#define I2C_IT_TXFOVR (0x1 << 3)
@@ -135,31 +135,31 @@
};
/**
- * struct nmk_i2c_dev - private data structure of the controller
- * @pdev: parent platform device
- * @adap: corresponding I2C adapter
- * @irq: interrupt line for the controller
- * @virtbase: virtual io memory area
- * @clk: hardware i2c block clock
- * @cfg: machine provided controller configuration
- * @cli: holder of client specific data
- * @stop: stop condition
- * @xfer_complete: acknowledge completion for a I2C message
- * @result: controller propogated result
- * @regulator: pointer to i2c regulator
- * @busy: Busy doing transfer
+ * struct nmk_i2c_dev - private data structure of the controller.
+ * @pdev: parent platform device.
+ * @adap: corresponding I2C adapter.
+ * @irq: interrupt line for the controller.
+ * @virtbase: virtual io memory area.
+ * @clk: hardware i2c block clock.
+ * @cfg: machine provided controller configuration.
+ * @cli: holder of client specific data.
+ * @stop: stop condition.
+ * @xfer_complete: acknowledge completion for a I2C message.
+ * @result: controller propogated result.
+ * @regulator: pointer to i2c regulator.
+ * @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
struct platform_device *pdev;
- struct i2c_adapter adap;
- int irq;
+ struct i2c_adapter adap;
+ int irq;
void __iomem *virtbase;
struct clk *clk;
struct nmk_i2c_controller cfg;
struct i2c_nmk_client cli;
- int stop;
+ int stop;
struct completion xfer_complete;
- int result;
+ int result;
struct regulator *regulator;
bool busy;
};
@@ -217,8 +217,9 @@
}
}
- dev_err(&dev->pdev->dev, "flushing operation timed out "
- "giving up after %d attempts", LOOP_ATTEMPTS);
+ dev_err(&dev->pdev->dev,
+ "flushing operation timed out giving up after %d attempts",
+ LOOP_ATTEMPTS);
return -ETIMEDOUT;
}
@@ -270,7 +271,7 @@
}
/* enable peripheral, master mode operation */
-#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
+#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
/**
* load_i2c_mcr_reg() - load the MCR register
@@ -363,8 +364,8 @@
* and high speed (up to 3.4 Mb/s)
*/
if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
- dev_err(&dev->pdev->dev, "do not support this mode "
- "defaulting to std. mode\n");
+ dev_err(&dev->pdev->dev,
+ "do not support this mode defaulting to std. mode\n");
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
writel(I2C_FREQ_MODE_STANDARD << 4,
@@ -423,7 +424,7 @@
if (timeout < 0) {
dev_err(&dev->pdev->dev,
- "wait_for_completion_timeout"
+ "wait_for_completion_timeout "
"returned %d waiting for event\n", timeout);
status = timeout;
}
@@ -556,8 +557,8 @@
if (((i2c_sr >> 2) & 0x3) == 0x3) {
/* get the abort cause */
cause = (i2c_sr >> 4) & 0x7;
- dev_err(&dev->pdev->dev, "%s\n", cause
- >= ARRAY_SIZE(abort_causes) ?
+ dev_err(&dev->pdev->dev, "%s\n",
+ cause >= ARRAY_SIZE(abort_causes) ?
"unknown reason" :
abort_causes[cause]);
}
@@ -582,13 +583,13 @@
*
* NOTE:
* READ TRANSFER : We impose a restriction of the first message to be the
- * index message for any read transaction.
- * - a no index is coded as '0',
- * - 2byte big endian index is coded as '3'
- * !!! msg[0].buf holds the actual index.
- * This is compatible with generic messages of smbus emulator
- * that send a one byte index.
- * eg. a I2C transation to read 2 bytes from index 0
+ * index message for any read transaction.
+ * - a no index is coded as '0',
+ * - 2byte big endian index is coded as '3'
+ * !!! msg[0].buf holds the actual index.
+ * This is compatible with generic messages of smbus emulator
+ * that send a one byte index.
+ * eg. a I2C transation to read 2 bytes from index 0
* idx = 0;
* msg[0].addr = client->addr;
* msg[0].flags = 0x0;
@@ -644,8 +645,8 @@
for (i = 0; i < num_msgs; i++) {
if (unlikely(msgs[i].flags & I2C_M_TEN)) {
- dev_err(&dev->pdev->dev, "10 bit addressing"
- "not supported\n");
+ dev_err(&dev->pdev->dev,
+ "10 bit addressing not supported\n");
status = -EINVAL;
goto out;
@@ -789,8 +790,9 @@
if (dev->cli.count) {
dev->result = -EIO;
- dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
- "xfered\n", dev->cli.count);
+ dev_err(&dev->pdev->dev,
+ "%lu bytes still remain to be xfered\n",
+ dev->cli.count);
(void) init_hw(dev);
}
complete(&dev->xfer_complete);
@@ -923,7 +925,7 @@
}
if (request_mem_region(res->start, resource_size(res),
- DRIVER_NAME "I/O region") == NULL) {
+ DRIVER_NAME "I/O region") == NULL) {
ret = -EBUSY;
goto err_no_region;
}
@@ -935,7 +937,7 @@
}
dev->irq = platform_get_irq(pdev, 0);
- ret = request_irq(dev->irq, i2c_irq_handler, IRQF_DISABLED,
+ ret = request_irq(dev->irq, i2c_irq_handler, 0,
DRIVER_NAME, dev);
if (ret) {
dev_err(&pdev->dev, "cannot claim the irq %d\n", dev->irq);
@@ -980,8 +982,9 @@
i2c_set_adapdata(adap, dev);
- dev_info(&pdev->dev, "initialize %s on virtual "
- "base %p\n", adap->name, dev->virtbase);
+ dev_info(&pdev->dev,
+ "initialize %s on virtual base %p\n",
+ adap->name, dev->virtbase);
ret = i2c_add_numbered_adapter(adap);
if (ret) {
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index 7243426..835e47b 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -610,7 +610,7 @@
goto err_iomap;
}
- ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_DISABLED | IRQF_SHARED,
+ ret = request_irq(i2c->irq, nuc900_i2c_irq, IRQF_SHARED,
dev_name(&pdev->dev), i2c);
if (ret != 0) {
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 2dfb631..a43d002 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -42,12 +42,12 @@
#include <linux/pm_runtime.h>
/* I2C controller revisions */
-#define OMAP_I2C_REV_2 0x20
+#define OMAP_I2C_OMAP1_REV_2 0x20
/* I2C controller revisions present on specific hardware */
#define OMAP_I2C_REV_ON_2430 0x36
#define OMAP_I2C_REV_ON_3430 0x3C
-#define OMAP_I2C_REV_ON_4430 0x40
+#define OMAP_I2C_REV_ON_3530_4430 0x40
/* timeout waiting for the controller to respond */
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
@@ -72,11 +72,12 @@
OMAP_I2C_SCLH_REG,
OMAP_I2C_SYSTEST_REG,
OMAP_I2C_BUFSTAT_REG,
- OMAP_I2C_REVNB_LO,
- OMAP_I2C_REVNB_HI,
- OMAP_I2C_IRQSTATUS_RAW,
- OMAP_I2C_IRQENABLE_SET,
- OMAP_I2C_IRQENABLE_CLR,
+ /* only on OMAP4430 */
+ OMAP_I2C_IP_V2_REVNB_LO,
+ OMAP_I2C_IP_V2_REVNB_HI,
+ OMAP_I2C_IP_V2_IRQSTATUS_RAW,
+ OMAP_I2C_IP_V2_IRQENABLE_SET,
+ OMAP_I2C_IP_V2_IRQENABLE_CLR,
};
/* I2C Interrupt Enable Register (OMAP_I2C_IE): */
@@ -193,7 +194,6 @@
*/
u8 rev;
unsigned b_hw:1; /* bad h/w fixes */
- unsigned idle:1;
u16 iestate; /* Saved interrupt register */
u16 pscstate;
u16 scllstate;
@@ -204,7 +204,7 @@
u16 errata;
};
-static const u8 reg_map[] = {
+static const u8 reg_map_ip_v1[] = {
[OMAP_I2C_REV_REG] = 0x00,
[OMAP_I2C_IE_REG] = 0x01,
[OMAP_I2C_STAT_REG] = 0x02,
@@ -225,7 +225,7 @@
[OMAP_I2C_BUFSTAT_REG] = 0x10,
};
-static const u8 omap4_reg_map[] = {
+static const u8 reg_map_ip_v2[] = {
[OMAP_I2C_REV_REG] = 0x04,
[OMAP_I2C_IE_REG] = 0x2c,
[OMAP_I2C_STAT_REG] = 0x28,
@@ -244,11 +244,11 @@
[OMAP_I2C_SCLH_REG] = 0xb8,
[OMAP_I2C_SYSTEST_REG] = 0xbC,
[OMAP_I2C_BUFSTAT_REG] = 0xc0,
- [OMAP_I2C_REVNB_LO] = 0x00,
- [OMAP_I2C_REVNB_HI] = 0x04,
- [OMAP_I2C_IRQSTATUS_RAW] = 0x24,
- [OMAP_I2C_IRQENABLE_SET] = 0x2c,
- [OMAP_I2C_IRQENABLE_CLR] = 0x30,
+ [OMAP_I2C_IP_V2_REVNB_LO] = 0x00,
+ [OMAP_I2C_IP_V2_REVNB_HI] = 0x04,
+ [OMAP_I2C_IP_V2_IRQSTATUS_RAW] = 0x24,
+ [OMAP_I2C_IP_V2_IRQENABLE_SET] = 0x2c,
+ [OMAP_I2C_IP_V2_IRQENABLE_CLR] = 0x30,
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -266,17 +266,11 @@
static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
- struct platform_device *pdev;
struct omap_i2c_bus_platform_data *pdata;
- WARN_ON(!dev->idle);
+ pdata = dev->dev->platform_data;
- pdev = to_platform_device(dev->dev);
- pdata = pdev->dev.platform_data;
-
- pm_runtime_get_sync(&pdev->dev);
-
- if (cpu_is_omap34xx()) {
+ if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
@@ -286,7 +280,6 @@
omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
}
- dev->idle = 0;
/*
* Don't write to this register if the IE state is 0 as it can
@@ -298,32 +291,25 @@
static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
- struct platform_device *pdev;
struct omap_i2c_bus_platform_data *pdata;
u16 iv;
- WARN_ON(dev->idle);
-
- pdev = to_platform_device(dev->dev);
- pdata = pdev->dev.platform_data;
+ pdata = dev->dev->platform_data;
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
- if (dev->rev >= OMAP_I2C_REV_ON_4430)
- omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1);
+ if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
else
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
- if (dev->rev < OMAP_I2C_REV_2) {
+ if (dev->rev < OMAP_I2C_OMAP1_REV_2) {
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
} else {
omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
- /* Flush posted write before the dev->idle store occurs */
+ /* Flush posted write */
omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
}
- dev->idle = 1;
-
- pm_runtime_put_sync(&pdev->dev);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -334,8 +320,11 @@
unsigned long timeout;
unsigned long internal_clk = 0;
struct clk *fclk;
+ struct omap_i2c_bus_platform_data *pdata;
- if (dev->rev >= OMAP_I2C_REV_2) {
+ pdata = dev->dev->platform_data;
+
+ if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) &
@@ -378,12 +367,13 @@
* REVISIT: Some wkup sources might not be needed.
*/
dev->westate = OMAP_I2C_WE_ALL;
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
+ dev->westate);
}
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- if (cpu_class_is_omap1()) {
+ if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/*
* The I2C functional clock is the armxor_ck, so there's
* no need to get "armxor_ck" separately. Now, if OMAP2420
@@ -407,7 +397,7 @@
psc = fclk_rate / 12000000;
}
- if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
+ if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
/*
* HSI2C controller internal clk rate should be 19.2 Mhz for
@@ -415,7 +405,8 @@
* to get longer filter period for better noise suppression.
* The filter is iclk (fclk for HS) period.
*/
- if (dev->speed > 400 || cpu_is_omap2430())
+ if (dev->speed > 400 ||
+ pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
internal_clk = 19200;
else if (dev->speed > 100)
internal_clk = 9600;
@@ -484,7 +475,7 @@
dev->errata = 0;
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207;
/* Enable interrupts */
@@ -493,7 +484,7 @@
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
- if (cpu_is_omap34xx()) {
+ if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
dev->pscstate = psc;
dev->scllstate = scll;
dev->sclhstate = sclh;
@@ -642,7 +633,7 @@
int i;
int r;
- omap_i2c_unidle(dev);
+ pm_runtime_get_sync(dev->dev);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
@@ -665,7 +656,7 @@
omap_i2c_wait_for_bb(dev);
out:
- omap_i2c_idle(dev);
+ pm_runtime_put(dev->dev);
return r;
}
@@ -720,12 +711,12 @@
#ifdef CONFIG_ARCH_OMAP15XX
static irqreturn_t
-omap_i2c_rev1_isr(int this_irq, void *dev_id)
+omap_i2c_omap1_isr(int this_irq, void *dev_id)
{
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
- if (dev->idle)
+ if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
@@ -774,7 +765,7 @@
return IRQ_HANDLED;
}
#else
-#define omap_i2c_rev1_isr NULL
+#define omap_i2c_omap1_isr NULL
#endif
/*
@@ -813,8 +804,11 @@
u16 bits;
u16 stat, w;
int err, count = 0;
+ struct omap_i2c_bus_platform_data *pdata;
- if (dev->idle)
+ pdata = dev->dev->platform_data;
+
+ if (pm_runtime_suspended(dev->dev))
return IRQ_NONE;
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
@@ -881,8 +875,8 @@
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (cpu_class_is_omap1() ||
- cpu_is_omap2420()) {
+ if (pdata->flags &
+ OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
*dev->buf++ = w >> 8;
dev->buf_len--;
@@ -924,8 +918,8 @@
* Data reg in 2430, omap3 and
* omap4 is 8 bit wide
*/
- if (cpu_class_is_omap1() ||
- cpu_is_omap2420()) {
+ if (pdata->flags &
+ OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) {
w |= *dev->buf++ << 8;
dev->buf_len--;
@@ -1016,7 +1010,6 @@
}
dev->speed = speed;
- dev->idle = 1;
dev->dev = &pdev->dev;
dev->irq = irq->start;
dev->base = ioremap(mem->start, resource_size(mem));
@@ -1027,27 +1020,22 @@
platform_set_drvdata(pdev, dev);
- if (cpu_is_omap7xx())
- dev->reg_shift = 1;
- else if (cpu_is_omap44xx())
- dev->reg_shift = 0;
- else
- dev->reg_shift = 2;
+ dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
- if (cpu_is_omap44xx())
- dev->regs = (u8 *) omap4_reg_map;
+ if (pdata->rev == OMAP_I2C_IP_VERSION_2)
+ dev->regs = (u8 *)reg_map_ip_v2;
else
- dev->regs = (u8 *) reg_map;
+ dev->regs = (u8 *)reg_map_ip_v1;
- pm_runtime_enable(&pdev->dev);
- omap_i2c_unidle(dev);
+ pm_runtime_enable(dev->dev);
+ pm_runtime_get_sync(dev->dev);
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
if (dev->rev <= OMAP_I2C_REV_ON_3430)
dev->errata |= I2C_OMAP3_1P153;
- if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
+ if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s;
/* Set up the fifo size - Get total size */
@@ -1059,7 +1047,7 @@
* size. This is to ensure that we can handle the status on int
* call back latencies.
*/
- if (dev->rev >= OMAP_I2C_REV_ON_4430) {
+ if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) {
dev->fifo_size = 0;
dev->b_hw = 0; /* Disable hardware fixes */
} else {
@@ -1075,7 +1063,8 @@
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
- isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
+ isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr :
+ omap_i2c_isr;
r = request_irq(dev->irq, isr, 0, pdev->name, dev);
if (r) {
@@ -1083,10 +1072,10 @@
goto err_unuse_clocks;
}
- dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
- pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
+ dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
+ pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
- omap_i2c_idle(dev);
+ pm_runtime_put(dev->dev);
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
@@ -1110,7 +1099,7 @@
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_idle(dev);
+ pm_runtime_put(dev->dev);
iounmap(dev->base);
err_free_mem:
platform_set_drvdata(pdev, NULL);
@@ -1139,12 +1128,43 @@
return 0;
}
+#ifdef CONFIG_PM_RUNTIME
+static int omap_i2c_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+ omap_i2c_idle(_dev);
+
+ return 0;
+}
+
+static int omap_i2c_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_i2c_dev *_dev = platform_get_drvdata(pdev);
+
+ omap_i2c_unidle(_dev);
+
+ return 0;
+}
+
+static struct dev_pm_ops omap_i2c_pm_ops = {
+ .runtime_suspend = omap_i2c_runtime_suspend,
+ .runtime_resume = omap_i2c_runtime_resume,
+};
+#define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
+#else
+#define OMAP_I2C_PM_OPS NULL
+#endif
+
static struct platform_driver omap_i2c_driver = {
.probe = omap_i2c_probe,
.remove = omap_i2c_remove,
.driver = {
.name = "omap_i2c",
.owner = THIS_MODULE,
+ .pm = OMAP_I2C_PM_OPS,
},
};
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index dfa7ae9..127051b 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -306,7 +306,7 @@
pmcmsptwi_data.irq = platform_get_irq(pldev, 0);
if (pmcmsptwi_data.irq) {
rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt,
- IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
pldev->name, &pmcmsptwi_data);
if (rc == 0) {
/*
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index f84a63c..2754cef 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -35,6 +35,8 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/io.h>
+#include <linux/of_i2c.h>
+#include <linux/of_gpio.h>
#include <asm/irq.h>
@@ -78,6 +80,8 @@
struct resource *ioarea;
struct i2c_adapter adap;
+ struct s3c2410_platform_i2c *pdata;
+ int gpios[2];
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
@@ -95,6 +99,12 @@
struct platform_device *pdev = to_platform_device(i2c->dev);
enum s3c24xx_i2c_type type;
+#ifdef CONFIG_OF
+ if (i2c->dev->of_node)
+ return of_device_is_compatible(i2c->dev->of_node,
+ "samsung,s3c2440-i2c");
+#endif
+
type = platform_get_device_id(pdev)->driver_data;
return type == TYPE_S3C2440;
}
@@ -625,7 +635,7 @@
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
{
- struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
+ struct s3c2410_platform_i2c *pdata = i2c->pdata;
unsigned long clkin = clk_get_rate(i2c->clk);
unsigned int divs, div1;
unsigned long target_frequency;
@@ -741,6 +751,49 @@
}
#endif
+#ifdef CONFIG_OF
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+ int idx, gpio, ret;
+
+ for (idx = 0; idx < 2; idx++) {
+ gpio = of_get_gpio(i2c->dev->of_node, idx);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
+ goto free_gpio;
+ }
+
+ ret = gpio_request(gpio, "i2c-bus");
+ if (ret) {
+ dev_err(i2c->dev, "gpio [%d] request failed\n", gpio);
+ goto free_gpio;
+ }
+ }
+ return 0;
+
+free_gpio:
+ while (--idx >= 0)
+ gpio_free(i2c->gpios[idx]);
+ return -EINVAL;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+ unsigned int idx;
+ for (idx = 0; idx < 2; idx++)
+ gpio_free(i2c->gpios[idx]);
+}
+#else
+static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
+{
+ return -EINVAL;
+}
+
+static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
+{
+}
+#endif
+
/* s3c24xx_i2c_init
*
* initialise the controller, set the IO lines and frequency
@@ -754,12 +807,15 @@
/* get the plafrom data */
- pdata = i2c->dev->platform_data;
+ pdata = i2c->pdata;
/* inititalise the gpio */
if (pdata->cfg_gpio)
pdata->cfg_gpio(to_platform_device(i2c->dev));
+ else
+ if (s3c24xx_i2c_parse_dt_gpio(i2c))
+ return -EINVAL;
/* write slave address */
@@ -785,6 +841,34 @@
return 0;
}
+#ifdef CONFIG_OF
+/* s3c24xx_i2c_parse_dt
+ *
+ * Parse the device tree node and retreive the platform data.
+*/
+
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
+{
+ struct s3c2410_platform_i2c *pdata = i2c->pdata;
+
+ if (!np)
+ return;
+
+ pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
+ of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
+ of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
+ of_property_read_u32(np, "samsung,i2c-max-bus-freq",
+ (u32 *)&pdata->frequency);
+}
+#else
+static void
+s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
+{
+ return;
+}
+#endif
+
/* s3c24xx_i2c_probe
*
* called by the bus driver when a suitable device is found
@@ -793,14 +877,16 @@
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c;
- struct s3c2410_platform_i2c *pdata;
+ struct s3c2410_platform_i2c *pdata = NULL;
struct resource *res;
int ret;
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data\n");
- return -EINVAL;
+ if (!pdev->dev.of_node) {
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -EINVAL;
+ }
}
i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
@@ -809,6 +895,17 @@
return -ENOMEM;
}
+ i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!i2c->pdata) {
+ ret = -ENOMEM;
+ goto err_noclk;
+ }
+
+ if (pdata)
+ memcpy(i2c->pdata, pdata, sizeof(*pdata));
+ else
+ s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
+
strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
i2c->adap.owner = THIS_MODULE;
i2c->adap.algo = &s3c24xx_i2c_algorithm;
@@ -883,7 +980,7 @@
goto err_iomap;
}
- ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED,
+ ret = request_irq(i2c->irq, s3c24xx_i2c_irq, 0,
dev_name(&pdev->dev), i2c);
if (ret != 0) {
@@ -903,7 +1000,8 @@
* being bus 0.
*/
- i2c->adap.nr = pdata->bus_num;
+ i2c->adap.nr = i2c->pdata->bus_num;
+ i2c->adap.dev.of_node = pdev->dev.of_node;
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
@@ -911,6 +1009,7 @@
goto err_cpufreq;
}
+ of_i2c_register_devices(&i2c->adap);
platform_set_drvdata(pdev, i2c);
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
@@ -959,6 +1058,7 @@
iounmap(i2c->regs);
release_resource(i2c->ioarea);
+ s3c24xx_i2c_dt_gpio_free(i2c);
kfree(i2c->ioarea);
kfree(i2c);
@@ -1012,6 +1112,17 @@
};
MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_i2c_match[] = {
+ { .compatible = "samsung,s3c2410-i2c" },
+ { .compatible = "samsung,s3c2440-i2c" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
+#else
+#define s3c24xx_i2c_match NULL
+#endif
+
static struct platform_driver s3c24xx_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
@@ -1020,6 +1131,7 @@
.owner = THIS_MODULE,
.name = "s3c-i2c",
.pm = S3C24XX_DEV_PM_OPS,
+ .of_match_table = s3c24xx_i2c_match,
},
};
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 3cad8fe..c418c41 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -502,7 +502,7 @@
}
OUT32(id, I2CCCR, ret);
- if (request_irq(id->irq, sh7760_i2c_irq, IRQF_DISABLED,
+ if (request_irq(id->irq, sh7760_i2c_irq, 0,
SH7760_I2C_DEVNAME, id)) {
dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
ret = -EBUSY;
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index f633a53..675c969 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -543,7 +543,7 @@
while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
for (n = res->start; hook && n <= res->end; n++) {
- if (request_irq(n, sh_mobile_i2c_isr, IRQF_DISABLED,
+ if (request_irq(n, sh_mobile_i2c_isr, 0,
dev_name(&dev->dev), dev)) {
for (n--; n >= res->start; n--)
free_irq(n, dev);
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 9987961..4d44af1 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -916,7 +916,7 @@
}
dev->irq = platform_get_irq(pdev, 0);
- if (request_irq(dev->irq, stu300_irh, IRQF_DISABLED,
+ if (request_irq(dev->irq, stu300_irh, 0,
NAME, dev)) {
ret = -EIO;
goto err_no_irq;
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3c94c4a..b050530 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -566,7 +566,7 @@
struct clk *clk;
struct clk *i2c_clk;
const unsigned int *prop;
- void *base;
+ void __iomem *base;
int irq;
int ret = 0;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 76b6d98..5a26584 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -677,19 +677,19 @@
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
- depends on SOC_AU1200
+ depends on MIPS_ALCHEMY
select IDE_XFER_MODE
choice
prompt "IDE Mode for AMD Alchemy Au1200"
default BLK_DEV_IDE_AU1XXX_PIO_DBDMA
- depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
config BLK_DEV_IDE_AU1XXX_PIO_DBDMA
bool "PIO+DbDMA IDE for AMD Alchemy Au1200"
config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200"
- depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
+ depends on BLK_DEV_IDE_AU1XXX
endchoice
config BLK_DEV_IDE_TX4938
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index b26c234..259786c 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -36,13 +36,17 @@
#include <linux/ide.h>
#include <linux/scatterlist.h>
-#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#include <asm/mach-au1x00/au1xxx_ide.h>
#define DRV_NAME "au1200-ide"
#define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
+#ifndef IDE_REG_SHIFT
+#define IDE_REG_SHIFT 5
+#endif
+
/* enable the burstmode in the dbdma */
#define IDE_AU1XXX_BURSTMODE 1
@@ -317,10 +321,11 @@
}
#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
-static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
+static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize,
+ u32 devwidth, u32 flags, u32 regbase)
{
dev->dev_id = dev_id;
- dev->dev_physaddr = (u32)IDE_PHYS_ADDR;
+ dev->dev_physaddr = CPHYSADDR(regbase);
dev->dev_intlevel = 0;
dev->dev_intpolarity = 0;
dev->dev_tsize = tsize;
@@ -344,7 +349,7 @@
dbdev_tab_t source_dev_tab, target_dev_tab;
u32 dev_id, tsize, devwidth, flags;
- dev_id = IDE_DDMA_REQ;
+ dev_id = hwif->ddma_id;
tsize = 8; /* 1 */
devwidth = 32; /* 16 */
@@ -356,20 +361,17 @@
#endif
/* setup dev_tab for tx channel */
- auide_init_dbdma_dev( &source_dev_tab,
- dev_id,
- tsize, devwidth, DEV_FLAGS_OUT | flags);
+ auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+ DEV_FLAGS_OUT | flags, auide->regbase);
auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
- auide_init_dbdma_dev( &source_dev_tab,
- dev_id,
- tsize, devwidth, DEV_FLAGS_IN | flags);
+ auide_init_dbdma_dev(&source_dev_tab, dev_id, tsize, devwidth,
+ DEV_FLAGS_IN | flags, auide->regbase);
auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
/* We also need to add a target device for the DMA */
- auide_init_dbdma_dev( &target_dev_tab,
- (u32)DSCR_CMD0_ALWAYS,
- tsize, devwidth, DEV_FLAGS_ANYUSE);
+ auide_init_dbdma_dev(&target_dev_tab, (u32)DSCR_CMD0_ALWAYS, tsize,
+ devwidth, DEV_FLAGS_ANYUSE, auide->regbase);
auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);
/* Get a channel for TX */
@@ -411,14 +413,12 @@
#endif
/* setup dev_tab for tx channel */
- auide_init_dbdma_dev( &source_dev_tab,
- (u32)DSCR_CMD0_ALWAYS,
- 8, 32, DEV_FLAGS_OUT | flags);
+ auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+ DEV_FLAGS_OUT | flags, auide->regbase);
auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
- auide_init_dbdma_dev( &source_dev_tab,
- (u32)DSCR_CMD0_ALWAYS,
- 8, 32, DEV_FLAGS_IN | flags);
+ auide_init_dbdma_dev(&source_dev_tab, (u32)DSCR_CMD0_ALWAYS, 8, 32,
+ DEV_FLAGS_IN | flags, auide->regbase);
auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
/* Get a channel for TX */
@@ -540,6 +540,14 @@
goto out;
}
+ res = platform_get_resource(dev, IORESOURCE_DMA, 0);
+ if (!res) {
+ pr_debug("%s: no DDMA ID resource\n", DRV_NAME);
+ ret = -ENODEV;
+ goto out;
+ }
+ ahwif->ddma_id = res->start;
+
memset(&hw, 0, sizeof(hw));
auide_setup_ports(&hw, ahwif);
hw.irq = ahwif->irq;
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 23e82e4..001b147 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -3,7 +3,7 @@
#
menu "Input device support"
- depends on !S390
+ depends on !S390 && !UML
config INPUT
tristate "Generic input layer (needed for keyboard, mouse, ...)" if EXPERT
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 56aa465..22d875f 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -134,6 +134,16 @@
To compile this driver as a module, choose M here: the module
will be called max8925_onkey.
+config INPUT_MC13783_PWRBUTTON
+ tristate "MC13783 ON buttons"
+ depends on MFD_MC13783
+ help
+ Support the ON buttons of MC13783 PMIC as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mc13783-pwrbutton.
+
config INPUT_MMA8450
tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 62dcd79..a244fc6 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -28,6 +28,7 @@
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
+obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o
obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o
obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
new file mode 100644
index 0000000..09b0522
--- /dev/null
+++ b/drivers/input/misc/mc13783-pwrbutton.c
@@ -0,0 +1,282 @@
+/**
+ * Copyright (C) 2011 Philippe Rétornaz
+ *
+ * Based on twl4030-pwrbutton driver by:
+ * Peter De Schrijver <peter.de-schrijver@nokia.com>
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+struct mc13783_pwrb {
+ struct input_dev *pwr;
+ struct mc13xxx *mc13783;
+#define MC13783_PWRB_B1_POL_INVERT (1 << 0)
+#define MC13783_PWRB_B2_POL_INVERT (1 << 1)
+#define MC13783_PWRB_B3_POL_INVERT (1 << 2)
+ int flags;
+ unsigned short keymap[3];
+};
+
+#define MC13783_REG_INTERRUPT_SENSE_1 5
+#define MC13783_IRQSENSE1_ONOFD1S (1 << 3)
+#define MC13783_IRQSENSE1_ONOFD2S (1 << 4)
+#define MC13783_IRQSENSE1_ONOFD3S (1 << 5)
+
+#define MC13783_REG_POWER_CONTROL_2 15
+#define MC13783_POWER_CONTROL_2_ON1BDBNC 4
+#define MC13783_POWER_CONTROL_2_ON2BDBNC 6
+#define MC13783_POWER_CONTROL_2_ON3BDBNC 8
+#define MC13783_POWER_CONTROL_2_ON1BRSTEN (1 << 1)
+#define MC13783_POWER_CONTROL_2_ON2BRSTEN (1 << 2)
+#define MC13783_POWER_CONTROL_2_ON3BRSTEN (1 << 3)
+
+static irqreturn_t button_irq(int irq, void *_priv)
+{
+ struct mc13783_pwrb *priv = _priv;
+ int val;
+
+ mc13xxx_irq_ack(priv->mc13783, irq);
+ mc13xxx_reg_read(priv->mc13783, MC13783_REG_INTERRUPT_SENSE_1, &val);
+
+ switch (irq) {
+ case MC13783_IRQ_ONOFD1:
+ val = val & MC13783_IRQSENSE1_ONOFD1S ? 1 : 0;
+ if (priv->flags & MC13783_PWRB_B1_POL_INVERT)
+ val ^= 1;
+ input_report_key(priv->pwr, priv->keymap[0], val);
+ break;
+
+ case MC13783_IRQ_ONOFD2:
+ val = val & MC13783_IRQSENSE1_ONOFD2S ? 1 : 0;
+ if (priv->flags & MC13783_PWRB_B2_POL_INVERT)
+ val ^= 1;
+ input_report_key(priv->pwr, priv->keymap[1], val);
+ break;
+
+ case MC13783_IRQ_ONOFD3:
+ val = val & MC13783_IRQSENSE1_ONOFD3S ? 1 : 0;
+ if (priv->flags & MC13783_PWRB_B3_POL_INVERT)
+ val ^= 1;
+ input_report_key(priv->pwr, priv->keymap[2], val);
+ break;
+ }
+
+ input_sync(priv->pwr);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit mc13783_pwrbutton_probe(struct platform_device *pdev)
+{
+ const struct mc13xxx_buttons_platform_data *pdata;
+ struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
+ struct input_dev *pwr;
+ struct mc13783_pwrb *priv;
+ int err = 0;
+ int reg = 0;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ pwr = input_allocate_device();
+ if (!pwr) {
+ dev_dbg(&pdev->dev, "Can't allocate power button\n");
+ return -ENOMEM;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ err = -ENOMEM;
+ dev_dbg(&pdev->dev, "Can't allocate power button\n");
+ goto free_input_dev;
+ }
+
+ reg |= (pdata->b1on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON1BDBNC;
+ reg |= (pdata->b2on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON2BDBNC;
+ reg |= (pdata->b3on_flags & 0x3) << MC13783_POWER_CONTROL_2_ON3BDBNC;
+
+ priv->pwr = pwr;
+ priv->mc13783 = mc13783;
+
+ mc13xxx_lock(mc13783);
+
+ if (pdata->b1on_flags & MC13783_BUTTON_ENABLE) {
+ priv->keymap[0] = pdata->b1on_key;
+ if (pdata->b1on_key != KEY_RESERVED)
+ __set_bit(pdata->b1on_key, pwr->keybit);
+
+ if (pdata->b1on_flags & MC13783_BUTTON_POL_INVERT)
+ priv->flags |= MC13783_PWRB_B1_POL_INVERT;
+
+ if (pdata->b1on_flags & MC13783_BUTTON_RESET_EN)
+ reg |= MC13783_POWER_CONTROL_2_ON1BRSTEN;
+
+ err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD1,
+ button_irq, "b1on", priv);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't request irq\n");
+ goto free_priv;
+ }
+ }
+
+ if (pdata->b2on_flags & MC13783_BUTTON_ENABLE) {
+ priv->keymap[1] = pdata->b2on_key;
+ if (pdata->b2on_key != KEY_RESERVED)
+ __set_bit(pdata->b2on_key, pwr->keybit);
+
+ if (pdata->b2on_flags & MC13783_BUTTON_POL_INVERT)
+ priv->flags |= MC13783_PWRB_B2_POL_INVERT;
+
+ if (pdata->b2on_flags & MC13783_BUTTON_RESET_EN)
+ reg |= MC13783_POWER_CONTROL_2_ON2BRSTEN;
+
+ err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD2,
+ button_irq, "b2on", priv);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't request irq\n");
+ goto free_irq_b1;
+ }
+ }
+
+ if (pdata->b3on_flags & MC13783_BUTTON_ENABLE) {
+ priv->keymap[2] = pdata->b3on_key;
+ if (pdata->b3on_key != KEY_RESERVED)
+ __set_bit(pdata->b3on_key, pwr->keybit);
+
+ if (pdata->b3on_flags & MC13783_BUTTON_POL_INVERT)
+ priv->flags |= MC13783_PWRB_B3_POL_INVERT;
+
+ if (pdata->b3on_flags & MC13783_BUTTON_RESET_EN)
+ reg |= MC13783_POWER_CONTROL_2_ON3BRSTEN;
+
+ err = mc13xxx_irq_request(mc13783, MC13783_IRQ_ONOFD3,
+ button_irq, "b3on", priv);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't request irq: %d\n", err);
+ goto free_irq_b2;
+ }
+ }
+
+ mc13xxx_reg_rmw(mc13783, MC13783_REG_POWER_CONTROL_2, 0x3FE, reg);
+
+ mc13xxx_unlock(mc13783);
+
+ pwr->name = "mc13783_pwrbutton";
+ pwr->phys = "mc13783_pwrbutton/input0";
+ pwr->dev.parent = &pdev->dev;
+
+ pwr->keycode = priv->keymap;
+ pwr->keycodemax = ARRAY_SIZE(priv->keymap);
+ pwr->keycodesize = sizeof(priv->keymap[0]);
+ __set_bit(EV_KEY, pwr->evbit);
+
+ err = input_register_device(pwr);
+ if (err) {
+ dev_dbg(&pdev->dev, "Can't register power button: %d\n", err);
+ goto free_irq;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+
+free_irq:
+ mc13xxx_lock(mc13783);
+
+ if (pdata->b3on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD3, priv);
+
+free_irq_b2:
+ if (pdata->b2on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD2, priv);
+
+free_irq_b1:
+ if (pdata->b1on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(mc13783, MC13783_IRQ_ONOFD1, priv);
+
+free_priv:
+ mc13xxx_unlock(mc13783);
+ kfree(priv);
+
+free_input_dev:
+ input_free_device(pwr);
+
+ return err;
+}
+
+static int __devexit mc13783_pwrbutton_remove(struct platform_device *pdev)
+{
+ struct mc13783_pwrb *priv = platform_get_drvdata(pdev);
+ const struct mc13xxx_buttons_platform_data *pdata;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ mc13xxx_lock(priv->mc13783);
+
+ if (pdata->b3on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD3, priv);
+ if (pdata->b2on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD2, priv);
+ if (pdata->b1on_flags & MC13783_BUTTON_ENABLE)
+ mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD1, priv);
+
+ mc13xxx_unlock(priv->mc13783);
+
+ input_unregister_device(priv->pwr);
+ kfree(priv);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+struct platform_driver mc13783_pwrbutton_driver = {
+ .probe = mc13783_pwrbutton_probe,
+ .remove = __devexit_p(mc13783_pwrbutton_remove),
+ .driver = {
+ .name = "mc13783-pwrbutton",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mc13783_pwrbutton_init(void)
+{
+ return platform_driver_register(&mc13783_pwrbutton_driver);
+}
+module_init(mc13783_pwrbutton_init);
+
+static void __exit mc13783_pwrbutton_exit(void)
+{
+ platform_driver_unregister(&mc13783_pwrbutton_driver);
+}
+module_exit(mc13783_pwrbutton_exit);
+
+MODULE_ALIAS("platform:mc13783-pwrbutton");
+MODULE_DESCRIPTION("MC13783 Power Button");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Philippe Retornaz");
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index c5bc62d..ede0274 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -35,7 +35,7 @@
struct mc13783_ts_priv {
struct input_dev *idev;
- struct mc13783 *mc13783;
+ struct mc13xxx *mc13xxx;
struct delayed_work work;
struct workqueue_struct *workq;
unsigned int sample[4];
@@ -45,7 +45,7 @@
{
struct mc13783_ts_priv *priv = data;
- mc13783_irq_ack(priv->mc13783, irq);
+ mc13xxx_irq_ack(priv->mc13xxx, irq);
/*
* Kick off reading coordinates. Note that if work happens already
@@ -121,10 +121,10 @@
{
struct mc13783_ts_priv *priv =
container_of(work, struct mc13783_ts_priv, work.work);
- unsigned int mode = MC13783_ADC_MODE_TS;
+ unsigned int mode = MC13XXX_ADC_MODE_TS;
unsigned int channel = 12;
- if (mc13783_adc_do_conversion(priv->mc13783,
+ if (mc13xxx_adc_do_conversion(priv->mc13xxx,
mode, channel, priv->sample) == 0)
mc13783_ts_report_sample(priv);
}
@@ -134,21 +134,21 @@
struct mc13783_ts_priv *priv = input_get_drvdata(dev);
int ret;
- mc13783_lock(priv->mc13783);
+ mc13xxx_lock(priv->mc13xxx);
- mc13783_irq_ack(priv->mc13783, MC13783_IRQ_TS);
+ mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS);
- ret = mc13783_irq_request(priv->mc13783, MC13783_IRQ_TS,
+ ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS,
mc13783_ts_handler, MC13783_TS_NAME, priv);
if (ret)
goto out;
- ret = mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
- MC13783_ADC0_TSMOD_MASK, MC13783_ADC0_TSMOD0);
+ ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+ MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0);
if (ret)
- mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
+ mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
out:
- mc13783_unlock(priv->mc13783);
+ mc13xxx_unlock(priv->mc13xxx);
return ret;
}
@@ -156,11 +156,11 @@
{
struct mc13783_ts_priv *priv = input_get_drvdata(dev);
- mc13783_lock(priv->mc13783);
- mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
- MC13783_ADC0_TSMOD_MASK, 0);
- mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
- mc13783_unlock(priv->mc13783);
+ mc13xxx_lock(priv->mc13xxx);
+ mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+ MC13XXX_ADC0_TSMOD_MASK, 0);
+ mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
+ mc13xxx_unlock(priv->mc13xxx);
cancel_delayed_work_sync(&priv->work);
}
@@ -177,7 +177,7 @@
goto err_free_mem;
INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
- priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+ priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
priv->idev = idev;
/*
diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
index 4fb6016..a233ed5 100644
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
@@ -5,7 +5,7 @@
menuconfig ISDN
bool "ISDN support"
depends on NET
- depends on !S390
+ depends on !S390 && !UML
---help---
ISDN ("Integrated Services Digital Network", called RNIS in France)
is a fully digital telephone service that can be used for voice and
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index b0d9ab1..6a8acf6 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -353,7 +353,7 @@
{ l3dss1_dummy_invoke(st, cr, id, ident, p, nlen);
return;
}
-#ifdef HISAX_DE_AOC
+#ifdef CONFIG_DE_AOC
{
#define FOO1(s,a,b) \
@@ -422,9 +422,9 @@
#undef FOO1
}
-#else /* not HISAX_DE_AOC */
+#else /* not CONFIG_DE_AOC */
l3_debug(st, "invoke break");
-#endif /* not HISAX_DE_AOC */
+#endif /* not CONFIG_DE_AOC */
break;
case 2: /* return result */
/* if no process available handle separately */
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index 22f847c..fbd5d88 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -107,9 +107,10 @@
}
led->cdev->name = led->name;
- led->cdev->default_trigger = led->default_trigger;
+ led->cdev->flags = LED_CORE_SUSPENDRESUME;
led->cdev->brightness_set = brightness_set;
led->cdev->blink_set = blink_set;
+ led->cdev->default_trigger = led->default_trigger;
ret = led_classdev_register(&pdev->dev, led->cdev);
if (ret < 0)
@@ -136,12 +137,44 @@
return mfd_cell_disable(pdev);
}
+static int asic3_led_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->suspend)
+ ret = (*cell->suspend)(pdev);
+
+ return ret;
+}
+
+static int asic3_led_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->resume)
+ ret = (*cell->resume)(pdev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops asic3_led_pm_ops = {
+ .suspend = asic3_led_suspend,
+ .resume = asic3_led_resume,
+};
+
static struct platform_driver asic3_led_driver = {
.probe = asic3_led_probe,
.remove = __devexit_p(asic3_led_remove),
.driver = {
.name = "leds-asic3",
.owner = THIS_MODULE,
+ .pm = &asic3_led_pm_ops,
},
};
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index f369e56..b3393a9 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -21,13 +21,13 @@
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
-#include <linux/mfd/mc13783.h>
+#include <linux/mfd/mc13xxx.h>
#include <linux/slab.h>
struct mc13783_led {
struct led_classdev cdev;
struct work_struct work;
- struct mc13783 *master;
+ struct mc13xxx *master;
enum led_brightness new_brightness;
int id;
};
@@ -111,11 +111,11 @@
break;
}
- mc13783_lock(led->master);
+ mc13xxx_lock(led->master);
- mc13783_reg_rmw(led->master, reg, mask, value);
+ mc13xxx_reg_rmw(led->master, reg, mask, value);
- mc13783_unlock(led->master);
+ mc13xxx_unlock(led->master);
}
static void mc13783_led_set(struct led_classdev *led_cdev,
@@ -172,23 +172,23 @@
break;
}
- mc13783_lock(led->master);
+ mc13xxx_lock(led->master);
- ret = mc13783_reg_rmw(led->master, reg, mask << shift,
+ ret = mc13xxx_reg_rmw(led->master, reg, mask << shift,
value << shift);
- mc13783_unlock(led->master);
+ mc13xxx_unlock(led->master);
return ret;
}
static int __devinit mc13783_leds_prepare(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
int ret = 0;
int reg = 0;
- mc13783_lock(dev);
+ mc13xxx_lock(dev);
if (pdata->flags & MC13783_LED_TC1HALF)
reg |= MC13783_LED_C1_TC1HALF_BIT;
@@ -196,7 +196,7 @@
if (pdata->flags & MC13783_LED_SLEWLIMTC)
reg |= MC13783_LED_Cx_SLEWLIM_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, reg);
if (ret)
goto out;
@@ -206,7 +206,7 @@
if (pdata->flags & MC13783_LED_SLEWLIMBL)
reg |= MC13783_LED_Cx_SLEWLIM_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, reg);
if (ret)
goto out;
@@ -216,7 +216,7 @@
if (pdata->flags & MC13783_LED_TRIODE_TC1)
reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, reg);
if (ret)
goto out;
@@ -226,7 +226,7 @@
if (pdata->flags & MC13783_LED_TRIODE_TC2)
reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, reg);
if (ret)
goto out;
@@ -236,7 +236,7 @@
if (pdata->flags & MC13783_LED_TRIODE_TC3)
reg |= MC13783_LED_Cx_TRIODE_TC_BIT;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, reg);
if (ret)
goto out;
@@ -255,17 +255,17 @@
reg |= (pdata->abref & MC13783_LED_C0_ABREF_MASK) <<
MC13783_LED_C0_ABREF;
- ret = mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
+ ret = mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, reg);
out:
- mc13783_unlock(dev);
+ mc13xxx_unlock(dev);
return ret;
}
static int __devinit mc13783_led_probe(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct mc13783_led_platform_data *led_cur;
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13xxx_led_platform_data *led_cur;
struct mc13783_led *led, *led_dat;
int ret, i;
int init_led = 0;
@@ -351,9 +351,9 @@
static int __devexit mc13783_led_remove(struct platform_device *pdev)
{
- struct mc13783_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct mc13783_led *led = platform_get_drvdata(pdev);
- struct mc13783 *dev = dev_get_drvdata(pdev->dev.parent);
+ struct mc13xxx *dev = dev_get_drvdata(pdev->dev.parent);
int i;
for (i = 0; i < pdata->num_leds; i++) {
@@ -361,16 +361,16 @@
cancel_work_sync(&led[i].work);
}
- mc13783_lock(dev);
+ mc13xxx_lock(dev);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
- mc13783_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_0, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_1, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_2, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_3, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_4, 0);
+ mc13xxx_reg_write(dev, MC13783_REG_LED_CONTROL_5, 0);
- mc13783_unlock(dev);
+ mc13xxx_unlock(dev);
kfree(led);
return 0;
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index f75a66e..faa4741 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -208,6 +208,16 @@
If unsure, say N.
+config DM_BUFIO
+ tristate
+ depends on BLK_DEV_DM && EXPERIMENTAL
+ ---help---
+ This interface allows you to do buffered I/O on a device and acts
+ as a cache, holding recently-read blocks in memory and performing
+ delayed writes.
+
+source "drivers/md/persistent-data/Kconfig"
+
config DM_CRYPT
tristate "Crypt target support"
depends on BLK_DEV_DM
@@ -233,6 +243,32 @@
---help---
Allow volume managers to take writable snapshots of a device.
+config DM_THIN_PROVISIONING
+ tristate "Thin provisioning target (EXPERIMENTAL)"
+ depends on BLK_DEV_DM && EXPERIMENTAL
+ select DM_PERSISTENT_DATA
+ ---help---
+ Provides thin provisioning and snapshots that share a data store.
+
+config DM_DEBUG_BLOCK_STACK_TRACING
+ boolean "Keep stack trace of thin provisioning block lock holders"
+ depends on STACKTRACE_SUPPORT && DM_THIN_PROVISIONING
+ select STACKTRACE
+ ---help---
+ Enable this for messages that may help debug problems with the
+ block manager locking used by thin provisioning.
+
+ If unsure, say N.
+
+config DM_DEBUG_SPACE_MAPS
+ boolean "Extra validation for thin provisioning space maps"
+ depends on DM_THIN_PROVISIONING
+ ---help---
+ Enable this for messages that may help debug problems with the
+ space maps used by thin provisioning.
+
+ If unsure, say N.
+
config DM_MIRROR
tristate "Mirror target"
depends on BLK_DEV_DM
diff --git a/drivers/md/Makefile b/drivers/md/Makefile
index 448838b..046860c 100644
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -10,6 +10,7 @@
dm-mirror-y += dm-raid1.o
dm-log-userspace-y \
+= dm-log-userspace-base.o dm-log-userspace-transfer.o
+dm-thin-pool-y += dm-thin.o dm-thin-metadata.o
md-mod-y += md.o bitmap.o
raid456-y += raid5.o
@@ -27,6 +28,7 @@
obj-$(CONFIG_MD_FAULTY) += faulty.o
obj-$(CONFIG_BLK_DEV_MD) += md-mod.o
obj-$(CONFIG_BLK_DEV_DM) += dm-mod.o
+obj-$(CONFIG_DM_BUFIO) += dm-bufio.o
obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
obj-$(CONFIG_DM_DELAY) += dm-delay.o
obj-$(CONFIG_DM_FLAKEY) += dm-flakey.o
@@ -34,10 +36,12 @@
obj-$(CONFIG_DM_MULTIPATH_QL) += dm-queue-length.o
obj-$(CONFIG_DM_MULTIPATH_ST) += dm-service-time.o
obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
+obj-$(CONFIG_DM_PERSISTENT_DATA) += persistent-data/
obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o
obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o
obj-$(CONFIG_DM_ZERO) += dm-zero.o
obj-$(CONFIG_DM_RAID) += dm-raid.o
+obj-$(CONFIG_DM_THIN_PROVISIONING) += dm-thin-pool.o
ifeq ($(CONFIG_DM_UEVENT),y)
dm-mod-objs += dm-uevent.o
diff --git a/drivers/md/dm-bufio.c b/drivers/md/dm-bufio.c
new file mode 100644
index 0000000..cb24666
--- /dev/null
+++ b/drivers/md/dm-bufio.c
@@ -0,0 +1,1699 @@
+/*
+ * Copyright (C) 2009-2011 Red Hat, Inc.
+ *
+ * Author: Mikulas Patocka <mpatocka@redhat.com>
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-bufio.h"
+
+#include <linux/device-mapper.h>
+#include <linux/dm-io.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/version.h>
+#include <linux/shrinker.h>
+
+#define DM_MSG_PREFIX "bufio"
+
+/*
+ * Memory management policy:
+ * Limit the number of buffers to DM_BUFIO_MEMORY_PERCENT of main memory
+ * or DM_BUFIO_VMALLOC_PERCENT of vmalloc memory (whichever is lower).
+ * Always allocate at least DM_BUFIO_MIN_BUFFERS buffers.
+ * Start background writeback when there are DM_BUFIO_WRITEBACK_PERCENT
+ * dirty buffers.
+ */
+#define DM_BUFIO_MIN_BUFFERS 8
+
+#define DM_BUFIO_MEMORY_PERCENT 2
+#define DM_BUFIO_VMALLOC_PERCENT 25
+#define DM_BUFIO_WRITEBACK_PERCENT 75
+
+/*
+ * Check buffer ages in this interval (seconds)
+ */
+#define DM_BUFIO_WORK_TIMER_SECS 10
+
+/*
+ * Free buffers when they are older than this (seconds)
+ */
+#define DM_BUFIO_DEFAULT_AGE_SECS 60
+
+/*
+ * The number of bvec entries that are embedded directly in the buffer.
+ * If the chunk size is larger, dm-io is used to do the io.
+ */
+#define DM_BUFIO_INLINE_VECS 16
+
+/*
+ * Buffer hash
+ */
+#define DM_BUFIO_HASH_BITS 20
+#define DM_BUFIO_HASH(block) \
+ ((((block) >> DM_BUFIO_HASH_BITS) ^ (block)) & \
+ ((1 << DM_BUFIO_HASH_BITS) - 1))
+
+/*
+ * Don't try to use kmem_cache_alloc for blocks larger than this.
+ * For explanation, see alloc_buffer_data below.
+ */
+#define DM_BUFIO_BLOCK_SIZE_SLAB_LIMIT (PAGE_SIZE >> 1)
+#define DM_BUFIO_BLOCK_SIZE_GFP_LIMIT (PAGE_SIZE << (MAX_ORDER - 1))
+
+/*
+ * dm_buffer->list_mode
+ */
+#define LIST_CLEAN 0
+#define LIST_DIRTY 1
+#define LIST_SIZE 2
+
+/*
+ * Linking of buffers:
+ * All buffers are linked to cache_hash with their hash_list field.
+ *
+ * Clean buffers that are not being written (B_WRITING not set)
+ * are linked to lru[LIST_CLEAN] with their lru_list field.
+ *
+ * Dirty and clean buffers that are being written are linked to
+ * lru[LIST_DIRTY] with their lru_list field. When the write
+ * finishes, the buffer cannot be relinked immediately (because we
+ * are in an interrupt context and relinking requires process
+ * context), so some clean-not-writing buffers can be held on
+ * dirty_lru too. They are later added to lru in the process
+ * context.
+ */
+struct dm_bufio_client {
+ struct mutex lock;
+
+ struct list_head lru[LIST_SIZE];
+ unsigned long n_buffers[LIST_SIZE];
+
+ struct block_device *bdev;
+ unsigned block_size;
+ unsigned char sectors_per_block_bits;
+ unsigned char pages_per_block_bits;
+ unsigned char blocks_per_page_bits;
+ unsigned aux_size;
+ void (*alloc_callback)(struct dm_buffer *);
+ void (*write_callback)(struct dm_buffer *);
+
+ struct dm_io_client *dm_io;
+
+ struct list_head reserved_buffers;
+ unsigned need_reserved_buffers;
+
+ struct hlist_head *cache_hash;
+ wait_queue_head_t free_buffer_wait;
+
+ int async_write_error;
+
+ struct list_head client_list;
+ struct shrinker shrinker;
+};
+
+/*
+ * Buffer state bits.
+ */
+#define B_READING 0
+#define B_WRITING 1
+#define B_DIRTY 2
+
+/*
+ * Describes how the block was allocated:
+ * kmem_cache_alloc(), __get_free_pages() or vmalloc().
+ * See the comment at alloc_buffer_data.
+ */
+enum data_mode {
+ DATA_MODE_SLAB = 0,
+ DATA_MODE_GET_FREE_PAGES = 1,
+ DATA_MODE_VMALLOC = 2,
+ DATA_MODE_LIMIT = 3
+};
+
+struct dm_buffer {
+ struct hlist_node hash_list;
+ struct list_head lru_list;
+ sector_t block;
+ void *data;
+ enum data_mode data_mode;
+ unsigned char list_mode; /* LIST_* */
+ unsigned hold_count;
+ int read_error;
+ int write_error;
+ unsigned long state;
+ unsigned long last_accessed;
+ struct dm_bufio_client *c;
+ struct bio bio;
+ struct bio_vec bio_vec[DM_BUFIO_INLINE_VECS];
+};
+
+/*----------------------------------------------------------------*/
+
+static struct kmem_cache *dm_bufio_caches[PAGE_SHIFT - SECTOR_SHIFT];
+static char *dm_bufio_cache_names[PAGE_SHIFT - SECTOR_SHIFT];
+
+static inline int dm_bufio_cache_index(struct dm_bufio_client *c)
+{
+ unsigned ret = c->blocks_per_page_bits - 1;
+
+ BUG_ON(ret >= ARRAY_SIZE(dm_bufio_caches));
+
+ return ret;
+}
+
+#define DM_BUFIO_CACHE(c) (dm_bufio_caches[dm_bufio_cache_index(c)])
+#define DM_BUFIO_CACHE_NAME(c) (dm_bufio_cache_names[dm_bufio_cache_index(c)])
+
+#define dm_bufio_in_request() (!!current->bio_list)
+
+static void dm_bufio_lock(struct dm_bufio_client *c)
+{
+ mutex_lock_nested(&c->lock, dm_bufio_in_request());
+}
+
+static int dm_bufio_trylock(struct dm_bufio_client *c)
+{
+ return mutex_trylock(&c->lock);
+}
+
+static void dm_bufio_unlock(struct dm_bufio_client *c)
+{
+ mutex_unlock(&c->lock);
+}
+
+/*
+ * FIXME Move to sched.h?
+ */
+#ifdef CONFIG_PREEMPT_VOLUNTARY
+# define dm_bufio_cond_resched() \
+do { \
+ if (unlikely(need_resched())) \
+ _cond_resched(); \
+} while (0)
+#else
+# define dm_bufio_cond_resched() do { } while (0)
+#endif
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Default cache size: available memory divided by the ratio.
+ */
+static unsigned long dm_bufio_default_cache_size;
+
+/*
+ * Total cache size set by the user.
+ */
+static unsigned long dm_bufio_cache_size;
+
+/*
+ * A copy of dm_bufio_cache_size because dm_bufio_cache_size can change
+ * at any time. If it disagrees, the user has changed cache size.
+ */
+static unsigned long dm_bufio_cache_size_latch;
+
+static DEFINE_SPINLOCK(param_spinlock);
+
+/*
+ * Buffers are freed after this timeout
+ */
+static unsigned dm_bufio_max_age = DM_BUFIO_DEFAULT_AGE_SECS;
+
+static unsigned long dm_bufio_peak_allocated;
+static unsigned long dm_bufio_allocated_kmem_cache;
+static unsigned long dm_bufio_allocated_get_free_pages;
+static unsigned long dm_bufio_allocated_vmalloc;
+static unsigned long dm_bufio_current_allocated;
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Per-client cache: dm_bufio_cache_size / dm_bufio_client_count
+ */
+static unsigned long dm_bufio_cache_size_per_client;
+
+/*
+ * The current number of clients.
+ */
+static int dm_bufio_client_count;
+
+/*
+ * The list of all clients.
+ */
+static LIST_HEAD(dm_bufio_all_clients);
+
+/*
+ * This mutex protects dm_bufio_cache_size_latch,
+ * dm_bufio_cache_size_per_client and dm_bufio_client_count
+ */
+static DEFINE_MUTEX(dm_bufio_clients_lock);
+
+/*----------------------------------------------------------------*/
+
+static void adjust_total_allocated(enum data_mode data_mode, long diff)
+{
+ static unsigned long * const class_ptr[DATA_MODE_LIMIT] = {
+ &dm_bufio_allocated_kmem_cache,
+ &dm_bufio_allocated_get_free_pages,
+ &dm_bufio_allocated_vmalloc,
+ };
+
+ spin_lock(¶m_spinlock);
+
+ *class_ptr[data_mode] += diff;
+
+ dm_bufio_current_allocated += diff;
+
+ if (dm_bufio_current_allocated > dm_bufio_peak_allocated)
+ dm_bufio_peak_allocated = dm_bufio_current_allocated;
+
+ spin_unlock(¶m_spinlock);
+}
+
+/*
+ * Change the number of clients and recalculate per-client limit.
+ */
+static void __cache_size_refresh(void)
+{
+ BUG_ON(!mutex_is_locked(&dm_bufio_clients_lock));
+ BUG_ON(dm_bufio_client_count < 0);
+
+ dm_bufio_cache_size_latch = dm_bufio_cache_size;
+
+ barrier();
+
+ /*
+ * Use default if set to 0 and report the actual cache size used.
+ */
+ if (!dm_bufio_cache_size_latch) {
+ (void)cmpxchg(&dm_bufio_cache_size, 0,
+ dm_bufio_default_cache_size);
+ dm_bufio_cache_size_latch = dm_bufio_default_cache_size;
+ }
+
+ dm_bufio_cache_size_per_client = dm_bufio_cache_size_latch /
+ (dm_bufio_client_count ? : 1);
+}
+
+/*
+ * Allocating buffer data.
+ *
+ * Small buffers are allocated with kmem_cache, to use space optimally.
+ *
+ * For large buffers, we choose between get_free_pages and vmalloc.
+ * Each has advantages and disadvantages.
+ *
+ * __get_free_pages can randomly fail if the memory is fragmented.
+ * __vmalloc won't randomly fail, but vmalloc space is limited (it may be
+ * as low as 128M) so using it for caching is not appropriate.
+ *
+ * If the allocation may fail we use __get_free_pages. Memory fragmentation
+ * won't have a fatal effect here, but it just causes flushes of some other
+ * buffers and more I/O will be performed. Don't use __get_free_pages if it
+ * always fails (i.e. order >= MAX_ORDER).
+ *
+ * If the allocation shouldn't fail we use __vmalloc. This is only for the
+ * initial reserve allocation, so there's no risk of wasting all vmalloc
+ * space.
+ */
+static void *alloc_buffer_data(struct dm_bufio_client *c, gfp_t gfp_mask,
+ enum data_mode *data_mode)
+{
+ if (c->block_size <= DM_BUFIO_BLOCK_SIZE_SLAB_LIMIT) {
+ *data_mode = DATA_MODE_SLAB;
+ return kmem_cache_alloc(DM_BUFIO_CACHE(c), gfp_mask);
+ }
+
+ if (c->block_size <= DM_BUFIO_BLOCK_SIZE_GFP_LIMIT &&
+ gfp_mask & __GFP_NORETRY) {
+ *data_mode = DATA_MODE_GET_FREE_PAGES;
+ return (void *)__get_free_pages(gfp_mask,
+ c->pages_per_block_bits);
+ }
+
+ *data_mode = DATA_MODE_VMALLOC;
+ return __vmalloc(c->block_size, gfp_mask, PAGE_KERNEL);
+}
+
+/*
+ * Free buffer's data.
+ */
+static void free_buffer_data(struct dm_bufio_client *c,
+ void *data, enum data_mode data_mode)
+{
+ switch (data_mode) {
+ case DATA_MODE_SLAB:
+ kmem_cache_free(DM_BUFIO_CACHE(c), data);
+ break;
+
+ case DATA_MODE_GET_FREE_PAGES:
+ free_pages((unsigned long)data, c->pages_per_block_bits);
+ break;
+
+ case DATA_MODE_VMALLOC:
+ vfree(data);
+ break;
+
+ default:
+ DMCRIT("dm_bufio_free_buffer_data: bad data mode: %d",
+ data_mode);
+ BUG();
+ }
+}
+
+/*
+ * Allocate buffer and its data.
+ */
+static struct dm_buffer *alloc_buffer(struct dm_bufio_client *c, gfp_t gfp_mask)
+{
+ struct dm_buffer *b = kmalloc(sizeof(struct dm_buffer) + c->aux_size,
+ gfp_mask);
+
+ if (!b)
+ return NULL;
+
+ b->c = c;
+
+ b->data = alloc_buffer_data(c, gfp_mask, &b->data_mode);
+ if (!b->data) {
+ kfree(b);
+ return NULL;
+ }
+
+ adjust_total_allocated(b->data_mode, (long)c->block_size);
+
+ return b;
+}
+
+/*
+ * Free buffer and its data.
+ */
+static void free_buffer(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ adjust_total_allocated(b->data_mode, -(long)c->block_size);
+
+ free_buffer_data(c, b->data, b->data_mode);
+ kfree(b);
+}
+
+/*
+ * Link buffer to the hash list and clean or dirty queue.
+ */
+static void __link_buffer(struct dm_buffer *b, sector_t block, int dirty)
+{
+ struct dm_bufio_client *c = b->c;
+
+ c->n_buffers[dirty]++;
+ b->block = block;
+ b->list_mode = dirty;
+ list_add(&b->lru_list, &c->lru[dirty]);
+ hlist_add_head(&b->hash_list, &c->cache_hash[DM_BUFIO_HASH(block)]);
+ b->last_accessed = jiffies;
+}
+
+/*
+ * Unlink buffer from the hash list and dirty or clean queue.
+ */
+static void __unlink_buffer(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ BUG_ON(!c->n_buffers[b->list_mode]);
+
+ c->n_buffers[b->list_mode]--;
+ hlist_del(&b->hash_list);
+ list_del(&b->lru_list);
+}
+
+/*
+ * Place the buffer to the head of dirty or clean LRU queue.
+ */
+static void __relink_lru(struct dm_buffer *b, int dirty)
+{
+ struct dm_bufio_client *c = b->c;
+
+ BUG_ON(!c->n_buffers[b->list_mode]);
+
+ c->n_buffers[b->list_mode]--;
+ c->n_buffers[dirty]++;
+ b->list_mode = dirty;
+ list_del(&b->lru_list);
+ list_add(&b->lru_list, &c->lru[dirty]);
+}
+
+/*----------------------------------------------------------------
+ * Submit I/O on the buffer.
+ *
+ * Bio interface is faster but it has some problems:
+ * the vector list is limited (increasing this limit increases
+ * memory-consumption per buffer, so it is not viable);
+ *
+ * the memory must be direct-mapped, not vmalloced;
+ *
+ * the I/O driver can reject requests spuriously if it thinks that
+ * the requests are too big for the device or if they cross a
+ * controller-defined memory boundary.
+ *
+ * If the buffer is small enough (up to DM_BUFIO_INLINE_VECS pages) and
+ * it is not vmalloced, try using the bio interface.
+ *
+ * If the buffer is big, if it is vmalloced or if the underlying device
+ * rejects the bio because it is too large, use dm-io layer to do the I/O.
+ * The dm-io layer splits the I/O into multiple requests, avoiding the above
+ * shortcomings.
+ *--------------------------------------------------------------*/
+
+/*
+ * dm-io completion routine. It just calls b->bio.bi_end_io, pretending
+ * that the request was handled directly with bio interface.
+ */
+static void dmio_complete(unsigned long error, void *context)
+{
+ struct dm_buffer *b = context;
+
+ b->bio.bi_end_io(&b->bio, error ? -EIO : 0);
+}
+
+static void use_dmio(struct dm_buffer *b, int rw, sector_t block,
+ bio_end_io_t *end_io)
+{
+ int r;
+ struct dm_io_request io_req = {
+ .bi_rw = rw,
+ .notify.fn = dmio_complete,
+ .notify.context = b,
+ .client = b->c->dm_io,
+ };
+ struct dm_io_region region = {
+ .bdev = b->c->bdev,
+ .sector = block << b->c->sectors_per_block_bits,
+ .count = b->c->block_size >> SECTOR_SHIFT,
+ };
+
+ if (b->data_mode != DATA_MODE_VMALLOC) {
+ io_req.mem.type = DM_IO_KMEM;
+ io_req.mem.ptr.addr = b->data;
+ } else {
+ io_req.mem.type = DM_IO_VMA;
+ io_req.mem.ptr.vma = b->data;
+ }
+
+ b->bio.bi_end_io = end_io;
+
+ r = dm_io(&io_req, 1, ®ion, NULL);
+ if (r)
+ end_io(&b->bio, r);
+}
+
+static void use_inline_bio(struct dm_buffer *b, int rw, sector_t block,
+ bio_end_io_t *end_io)
+{
+ char *ptr;
+ int len;
+
+ bio_init(&b->bio);
+ b->bio.bi_io_vec = b->bio_vec;
+ b->bio.bi_max_vecs = DM_BUFIO_INLINE_VECS;
+ b->bio.bi_sector = block << b->c->sectors_per_block_bits;
+ b->bio.bi_bdev = b->c->bdev;
+ b->bio.bi_end_io = end_io;
+
+ /*
+ * We assume that if len >= PAGE_SIZE ptr is page-aligned.
+ * If len < PAGE_SIZE the buffer doesn't cross page boundary.
+ */
+ ptr = b->data;
+ len = b->c->block_size;
+
+ if (len >= PAGE_SIZE)
+ BUG_ON((unsigned long)ptr & (PAGE_SIZE - 1));
+ else
+ BUG_ON((unsigned long)ptr & (len - 1));
+
+ do {
+ if (!bio_add_page(&b->bio, virt_to_page(ptr),
+ len < PAGE_SIZE ? len : PAGE_SIZE,
+ virt_to_phys(ptr) & (PAGE_SIZE - 1))) {
+ BUG_ON(b->c->block_size <= PAGE_SIZE);
+ use_dmio(b, rw, block, end_io);
+ return;
+ }
+
+ len -= PAGE_SIZE;
+ ptr += PAGE_SIZE;
+ } while (len > 0);
+
+ submit_bio(rw, &b->bio);
+}
+
+static void submit_io(struct dm_buffer *b, int rw, sector_t block,
+ bio_end_io_t *end_io)
+{
+ if (rw == WRITE && b->c->write_callback)
+ b->c->write_callback(b);
+
+ if (b->c->block_size <= DM_BUFIO_INLINE_VECS * PAGE_SIZE &&
+ b->data_mode != DATA_MODE_VMALLOC)
+ use_inline_bio(b, rw, block, end_io);
+ else
+ use_dmio(b, rw, block, end_io);
+}
+
+/*----------------------------------------------------------------
+ * Writing dirty buffers
+ *--------------------------------------------------------------*/
+
+/*
+ * The endio routine for write.
+ *
+ * Set the error, clear B_WRITING bit and wake anyone who was waiting on
+ * it.
+ */
+static void write_endio(struct bio *bio, int error)
+{
+ struct dm_buffer *b = container_of(bio, struct dm_buffer, bio);
+
+ b->write_error = error;
+ if (error) {
+ struct dm_bufio_client *c = b->c;
+ (void)cmpxchg(&c->async_write_error, 0, error);
+ }
+
+ BUG_ON(!test_bit(B_WRITING, &b->state));
+
+ smp_mb__before_clear_bit();
+ clear_bit(B_WRITING, &b->state);
+ smp_mb__after_clear_bit();
+
+ wake_up_bit(&b->state, B_WRITING);
+}
+
+/*
+ * This function is called when wait_on_bit is actually waiting.
+ */
+static int do_io_schedule(void *word)
+{
+ io_schedule();
+
+ return 0;
+}
+
+/*
+ * Initiate a write on a dirty buffer, but don't wait for it.
+ *
+ * - If the buffer is not dirty, exit.
+ * - If there some previous write going on, wait for it to finish (we can't
+ * have two writes on the same buffer simultaneously).
+ * - Submit our write and don't wait on it. We set B_WRITING indicating
+ * that there is a write in progress.
+ */
+static void __write_dirty_buffer(struct dm_buffer *b)
+{
+ if (!test_bit(B_DIRTY, &b->state))
+ return;
+
+ clear_bit(B_DIRTY, &b->state);
+ wait_on_bit_lock(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+
+ submit_io(b, WRITE, b->block, write_endio);
+}
+
+/*
+ * Wait until any activity on the buffer finishes. Possibly write the
+ * buffer if it is dirty. When this function finishes, there is no I/O
+ * running on the buffer and the buffer is not dirty.
+ */
+static void __make_buffer_clean(struct dm_buffer *b)
+{
+ BUG_ON(b->hold_count);
+
+ if (!b->state) /* fast case */
+ return;
+
+ wait_on_bit(&b->state, B_READING, do_io_schedule, TASK_UNINTERRUPTIBLE);
+ __write_dirty_buffer(b);
+ wait_on_bit(&b->state, B_WRITING, do_io_schedule, TASK_UNINTERRUPTIBLE);
+}
+
+/*
+ * Find some buffer that is not held by anybody, clean it, unlink it and
+ * return it.
+ */
+static struct dm_buffer *__get_unclaimed_buffer(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b;
+
+ list_for_each_entry_reverse(b, &c->lru[LIST_CLEAN], lru_list) {
+ BUG_ON(test_bit(B_WRITING, &b->state));
+ BUG_ON(test_bit(B_DIRTY, &b->state));
+
+ if (!b->hold_count) {
+ __make_buffer_clean(b);
+ __unlink_buffer(b);
+ return b;
+ }
+ dm_bufio_cond_resched();
+ }
+
+ list_for_each_entry_reverse(b, &c->lru[LIST_DIRTY], lru_list) {
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ if (!b->hold_count) {
+ __make_buffer_clean(b);
+ __unlink_buffer(b);
+ return b;
+ }
+ dm_bufio_cond_resched();
+ }
+
+ return NULL;
+}
+
+/*
+ * Wait until some other threads free some buffer or release hold count on
+ * some buffer.
+ *
+ * This function is entered with c->lock held, drops it and regains it
+ * before exiting.
+ */
+static void __wait_for_free_buffer(struct dm_bufio_client *c)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ add_wait_queue(&c->free_buffer_wait, &wait);
+ set_task_state(current, TASK_UNINTERRUPTIBLE);
+ dm_bufio_unlock(c);
+
+ io_schedule();
+
+ set_task_state(current, TASK_RUNNING);
+ remove_wait_queue(&c->free_buffer_wait, &wait);
+
+ dm_bufio_lock(c);
+}
+
+/*
+ * Allocate a new buffer. If the allocation is not possible, wait until
+ * some other thread frees a buffer.
+ *
+ * May drop the lock and regain it.
+ */
+static struct dm_buffer *__alloc_buffer_wait_no_callback(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b;
+
+ /*
+ * dm-bufio is resistant to allocation failures (it just keeps
+ * one buffer reserved in cases all the allocations fail).
+ * So set flags to not try too hard:
+ * GFP_NOIO: don't recurse into the I/O layer
+ * __GFP_NORETRY: don't retry and rather return failure
+ * __GFP_NOMEMALLOC: don't use emergency reserves
+ * __GFP_NOWARN: don't print a warning in case of failure
+ *
+ * For debugging, if we set the cache size to 1, no new buffers will
+ * be allocated.
+ */
+ while (1) {
+ if (dm_bufio_cache_size_latch != 1) {
+ b = alloc_buffer(c, GFP_NOIO | __GFP_NORETRY | __GFP_NOMEMALLOC | __GFP_NOWARN);
+ if (b)
+ return b;
+ }
+
+ if (!list_empty(&c->reserved_buffers)) {
+ b = list_entry(c->reserved_buffers.next,
+ struct dm_buffer, lru_list);
+ list_del(&b->lru_list);
+ c->need_reserved_buffers++;
+
+ return b;
+ }
+
+ b = __get_unclaimed_buffer(c);
+ if (b)
+ return b;
+
+ __wait_for_free_buffer(c);
+ }
+}
+
+static struct dm_buffer *__alloc_buffer_wait(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b = __alloc_buffer_wait_no_callback(c);
+
+ if (c->alloc_callback)
+ c->alloc_callback(b);
+
+ return b;
+}
+
+/*
+ * Free a buffer and wake other threads waiting for free buffers.
+ */
+static void __free_buffer_wake(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ if (!c->need_reserved_buffers)
+ free_buffer(b);
+ else {
+ list_add(&b->lru_list, &c->reserved_buffers);
+ c->need_reserved_buffers--;
+ }
+
+ wake_up(&c->free_buffer_wait);
+}
+
+static void __write_dirty_buffers_async(struct dm_bufio_client *c, int no_wait)
+{
+ struct dm_buffer *b, *tmp;
+
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[LIST_DIRTY], lru_list) {
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ if (!test_bit(B_DIRTY, &b->state) &&
+ !test_bit(B_WRITING, &b->state)) {
+ __relink_lru(b, LIST_CLEAN);
+ continue;
+ }
+
+ if (no_wait && test_bit(B_WRITING, &b->state))
+ return;
+
+ __write_dirty_buffer(b);
+ dm_bufio_cond_resched();
+ }
+}
+
+/*
+ * Get writeback threshold and buffer limit for a given client.
+ */
+static void __get_memory_limit(struct dm_bufio_client *c,
+ unsigned long *threshold_buffers,
+ unsigned long *limit_buffers)
+{
+ unsigned long buffers;
+
+ if (dm_bufio_cache_size != dm_bufio_cache_size_latch) {
+ mutex_lock(&dm_bufio_clients_lock);
+ __cache_size_refresh();
+ mutex_unlock(&dm_bufio_clients_lock);
+ }
+
+ buffers = dm_bufio_cache_size_per_client >>
+ (c->sectors_per_block_bits + SECTOR_SHIFT);
+
+ if (buffers < DM_BUFIO_MIN_BUFFERS)
+ buffers = DM_BUFIO_MIN_BUFFERS;
+
+ *limit_buffers = buffers;
+ *threshold_buffers = buffers * DM_BUFIO_WRITEBACK_PERCENT / 100;
+}
+
+/*
+ * Check if we're over watermark.
+ * If we are over threshold_buffers, start freeing buffers.
+ * If we're over "limit_buffers", block until we get under the limit.
+ */
+static void __check_watermark(struct dm_bufio_client *c)
+{
+ unsigned long threshold_buffers, limit_buffers;
+
+ __get_memory_limit(c, &threshold_buffers, &limit_buffers);
+
+ while (c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY] >
+ limit_buffers) {
+
+ struct dm_buffer *b = __get_unclaimed_buffer(c);
+
+ if (!b)
+ return;
+
+ __free_buffer_wake(b);
+ dm_bufio_cond_resched();
+ }
+
+ if (c->n_buffers[LIST_DIRTY] > threshold_buffers)
+ __write_dirty_buffers_async(c, 1);
+}
+
+/*
+ * Find a buffer in the hash.
+ */
+static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block)
+{
+ struct dm_buffer *b;
+ struct hlist_node *hn;
+
+ hlist_for_each_entry(b, hn, &c->cache_hash[DM_BUFIO_HASH(block)],
+ hash_list) {
+ dm_bufio_cond_resched();
+ if (b->block == block)
+ return b;
+ }
+
+ return NULL;
+}
+
+/*----------------------------------------------------------------
+ * Getting a buffer
+ *--------------------------------------------------------------*/
+
+enum new_flag {
+ NF_FRESH = 0,
+ NF_READ = 1,
+ NF_GET = 2
+};
+
+static struct dm_buffer *__bufio_new(struct dm_bufio_client *c, sector_t block,
+ enum new_flag nf, struct dm_buffer **bp,
+ int *need_submit)
+{
+ struct dm_buffer *b, *new_b = NULL;
+
+ *need_submit = 0;
+
+ b = __find(c, block);
+ if (b) {
+ b->hold_count++;
+ __relink_lru(b, test_bit(B_DIRTY, &b->state) ||
+ test_bit(B_WRITING, &b->state));
+ return b;
+ }
+
+ if (nf == NF_GET)
+ return NULL;
+
+ new_b = __alloc_buffer_wait(c);
+
+ /*
+ * We've had a period where the mutex was unlocked, so need to
+ * recheck the hash table.
+ */
+ b = __find(c, block);
+ if (b) {
+ __free_buffer_wake(new_b);
+ b->hold_count++;
+ __relink_lru(b, test_bit(B_DIRTY, &b->state) ||
+ test_bit(B_WRITING, &b->state));
+ return b;
+ }
+
+ __check_watermark(c);
+
+ b = new_b;
+ b->hold_count = 1;
+ b->read_error = 0;
+ b->write_error = 0;
+ __link_buffer(b, block, LIST_CLEAN);
+
+ if (nf == NF_FRESH) {
+ b->state = 0;
+ return b;
+ }
+
+ b->state = 1 << B_READING;
+ *need_submit = 1;
+
+ return b;
+}
+
+/*
+ * The endio routine for reading: set the error, clear the bit and wake up
+ * anyone waiting on the buffer.
+ */
+static void read_endio(struct bio *bio, int error)
+{
+ struct dm_buffer *b = container_of(bio, struct dm_buffer, bio);
+
+ b->read_error = error;
+
+ BUG_ON(!test_bit(B_READING, &b->state));
+
+ smp_mb__before_clear_bit();
+ clear_bit(B_READING, &b->state);
+ smp_mb__after_clear_bit();
+
+ wake_up_bit(&b->state, B_READING);
+}
+
+/*
+ * A common routine for dm_bufio_new and dm_bufio_read. Operation of these
+ * functions is similar except that dm_bufio_new doesn't read the
+ * buffer from the disk (assuming that the caller overwrites all the data
+ * and uses dm_bufio_mark_buffer_dirty to write new data back).
+ */
+static void *new_read(struct dm_bufio_client *c, sector_t block,
+ enum new_flag nf, struct dm_buffer **bp)
+{
+ int need_submit;
+ struct dm_buffer *b;
+
+ dm_bufio_lock(c);
+ b = __bufio_new(c, block, nf, bp, &need_submit);
+ dm_bufio_unlock(c);
+
+ if (!b || IS_ERR(b))
+ return b;
+
+ if (need_submit)
+ submit_io(b, READ, b->block, read_endio);
+
+ wait_on_bit(&b->state, B_READING, do_io_schedule, TASK_UNINTERRUPTIBLE);
+
+ if (b->read_error) {
+ int error = b->read_error;
+
+ dm_bufio_release(b);
+
+ return ERR_PTR(error);
+ }
+
+ *bp = b;
+
+ return b->data;
+}
+
+void *dm_bufio_get(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp)
+{
+ return new_read(c, block, NF_GET, bp);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get);
+
+void *dm_bufio_read(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp)
+{
+ BUG_ON(dm_bufio_in_request());
+
+ return new_read(c, block, NF_READ, bp);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_read);
+
+void *dm_bufio_new(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp)
+{
+ BUG_ON(dm_bufio_in_request());
+
+ return new_read(c, block, NF_FRESH, bp);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_new);
+
+void dm_bufio_release(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ dm_bufio_lock(c);
+
+ BUG_ON(test_bit(B_READING, &b->state));
+ BUG_ON(!b->hold_count);
+
+ b->hold_count--;
+ if (!b->hold_count) {
+ wake_up(&c->free_buffer_wait);
+
+ /*
+ * If there were errors on the buffer, and the buffer is not
+ * to be written, free the buffer. There is no point in caching
+ * invalid buffer.
+ */
+ if ((b->read_error || b->write_error) &&
+ !test_bit(B_WRITING, &b->state) &&
+ !test_bit(B_DIRTY, &b->state)) {
+ __unlink_buffer(b);
+ __free_buffer_wake(b);
+ }
+ }
+
+ dm_bufio_unlock(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_release);
+
+void dm_bufio_mark_buffer_dirty(struct dm_buffer *b)
+{
+ struct dm_bufio_client *c = b->c;
+
+ dm_bufio_lock(c);
+
+ if (!test_and_set_bit(B_DIRTY, &b->state))
+ __relink_lru(b, LIST_DIRTY);
+
+ dm_bufio_unlock(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_mark_buffer_dirty);
+
+void dm_bufio_write_dirty_buffers_async(struct dm_bufio_client *c)
+{
+ BUG_ON(dm_bufio_in_request());
+
+ dm_bufio_lock(c);
+ __write_dirty_buffers_async(c, 0);
+ dm_bufio_unlock(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_write_dirty_buffers_async);
+
+/*
+ * For performance, it is essential that the buffers are written asynchronously
+ * and simultaneously (so that the block layer can merge the writes) and then
+ * waited upon.
+ *
+ * Finally, we flush hardware disk cache.
+ */
+int dm_bufio_write_dirty_buffers(struct dm_bufio_client *c)
+{
+ int a, f;
+ unsigned long buffers_processed = 0;
+ struct dm_buffer *b, *tmp;
+
+ dm_bufio_lock(c);
+ __write_dirty_buffers_async(c, 0);
+
+again:
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[LIST_DIRTY], lru_list) {
+ int dropped_lock = 0;
+
+ if (buffers_processed < c->n_buffers[LIST_DIRTY])
+ buffers_processed++;
+
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ if (test_bit(B_WRITING, &b->state)) {
+ if (buffers_processed < c->n_buffers[LIST_DIRTY]) {
+ dropped_lock = 1;
+ b->hold_count++;
+ dm_bufio_unlock(c);
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule,
+ TASK_UNINTERRUPTIBLE);
+ dm_bufio_lock(c);
+ b->hold_count--;
+ } else
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule,
+ TASK_UNINTERRUPTIBLE);
+ }
+
+ if (!test_bit(B_DIRTY, &b->state) &&
+ !test_bit(B_WRITING, &b->state))
+ __relink_lru(b, LIST_CLEAN);
+
+ dm_bufio_cond_resched();
+
+ /*
+ * If we dropped the lock, the list is no longer consistent,
+ * so we must restart the search.
+ *
+ * In the most common case, the buffer just processed is
+ * relinked to the clean list, so we won't loop scanning the
+ * same buffer again and again.
+ *
+ * This may livelock if there is another thread simultaneously
+ * dirtying buffers, so we count the number of buffers walked
+ * and if it exceeds the total number of buffers, it means that
+ * someone is doing some writes simultaneously with us. In
+ * this case, stop, dropping the lock.
+ */
+ if (dropped_lock)
+ goto again;
+ }
+ wake_up(&c->free_buffer_wait);
+ dm_bufio_unlock(c);
+
+ a = xchg(&c->async_write_error, 0);
+ f = dm_bufio_issue_flush(c);
+ if (a)
+ return a;
+
+ return f;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_write_dirty_buffers);
+
+/*
+ * Use dm-io to send and empty barrier flush the device.
+ */
+int dm_bufio_issue_flush(struct dm_bufio_client *c)
+{
+ struct dm_io_request io_req = {
+ .bi_rw = REQ_FLUSH,
+ .mem.type = DM_IO_KMEM,
+ .mem.ptr.addr = NULL,
+ .client = c->dm_io,
+ };
+ struct dm_io_region io_reg = {
+ .bdev = c->bdev,
+ .sector = 0,
+ .count = 0,
+ };
+
+ BUG_ON(dm_bufio_in_request());
+
+ return dm_io(&io_req, 1, &io_reg, NULL);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_issue_flush);
+
+/*
+ * We first delete any other buffer that may be at that new location.
+ *
+ * Then, we write the buffer to the original location if it was dirty.
+ *
+ * Then, if we are the only one who is holding the buffer, relink the buffer
+ * in the hash queue for the new location.
+ *
+ * If there was someone else holding the buffer, we write it to the new
+ * location but not relink it, because that other user needs to have the buffer
+ * at the same place.
+ */
+void dm_bufio_release_move(struct dm_buffer *b, sector_t new_block)
+{
+ struct dm_bufio_client *c = b->c;
+ struct dm_buffer *new;
+
+ BUG_ON(dm_bufio_in_request());
+
+ dm_bufio_lock(c);
+
+retry:
+ new = __find(c, new_block);
+ if (new) {
+ if (new->hold_count) {
+ __wait_for_free_buffer(c);
+ goto retry;
+ }
+
+ /*
+ * FIXME: Is there any point waiting for a write that's going
+ * to be overwritten in a bit?
+ */
+ __make_buffer_clean(new);
+ __unlink_buffer(new);
+ __free_buffer_wake(new);
+ }
+
+ BUG_ON(!b->hold_count);
+ BUG_ON(test_bit(B_READING, &b->state));
+
+ __write_dirty_buffer(b);
+ if (b->hold_count == 1) {
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+ set_bit(B_DIRTY, &b->state);
+ __unlink_buffer(b);
+ __link_buffer(b, new_block, LIST_DIRTY);
+ } else {
+ sector_t old_block;
+ wait_on_bit_lock(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+ /*
+ * Relink buffer to "new_block" so that write_callback
+ * sees "new_block" as a block number.
+ * After the write, link the buffer back to old_block.
+ * All this must be done in bufio lock, so that block number
+ * change isn't visible to other threads.
+ */
+ old_block = b->block;
+ __unlink_buffer(b);
+ __link_buffer(b, new_block, b->list_mode);
+ submit_io(b, WRITE, new_block, write_endio);
+ wait_on_bit(&b->state, B_WRITING,
+ do_io_schedule, TASK_UNINTERRUPTIBLE);
+ __unlink_buffer(b);
+ __link_buffer(b, old_block, b->list_mode);
+ }
+
+ dm_bufio_unlock(c);
+ dm_bufio_release(b);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_release_move);
+
+unsigned dm_bufio_get_block_size(struct dm_bufio_client *c)
+{
+ return c->block_size;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_block_size);
+
+sector_t dm_bufio_get_device_size(struct dm_bufio_client *c)
+{
+ return i_size_read(c->bdev->bd_inode) >>
+ (SECTOR_SHIFT + c->sectors_per_block_bits);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_device_size);
+
+sector_t dm_bufio_get_block_number(struct dm_buffer *b)
+{
+ return b->block;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_block_number);
+
+void *dm_bufio_get_block_data(struct dm_buffer *b)
+{
+ return b->data;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_block_data);
+
+void *dm_bufio_get_aux_data(struct dm_buffer *b)
+{
+ return b + 1;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_aux_data);
+
+struct dm_bufio_client *dm_bufio_get_client(struct dm_buffer *b)
+{
+ return b->c;
+}
+EXPORT_SYMBOL_GPL(dm_bufio_get_client);
+
+static void drop_buffers(struct dm_bufio_client *c)
+{
+ struct dm_buffer *b;
+ int i;
+
+ BUG_ON(dm_bufio_in_request());
+
+ /*
+ * An optimization so that the buffers are not written one-by-one.
+ */
+ dm_bufio_write_dirty_buffers_async(c);
+
+ dm_bufio_lock(c);
+
+ while ((b = __get_unclaimed_buffer(c)))
+ __free_buffer_wake(b);
+
+ for (i = 0; i < LIST_SIZE; i++)
+ list_for_each_entry(b, &c->lru[i], lru_list)
+ DMERR("leaked buffer %llx, hold count %u, list %d",
+ (unsigned long long)b->block, b->hold_count, i);
+
+ for (i = 0; i < LIST_SIZE; i++)
+ BUG_ON(!list_empty(&c->lru[i]));
+
+ dm_bufio_unlock(c);
+}
+
+/*
+ * Test if the buffer is unused and too old, and commit it.
+ * At if noio is set, we must not do any I/O because we hold
+ * dm_bufio_clients_lock and we would risk deadlock if the I/O gets rerouted to
+ * different bufio client.
+ */
+static int __cleanup_old_buffer(struct dm_buffer *b, gfp_t gfp,
+ unsigned long max_jiffies)
+{
+ if (jiffies - b->last_accessed < max_jiffies)
+ return 1;
+
+ if (!(gfp & __GFP_IO)) {
+ if (test_bit(B_READING, &b->state) ||
+ test_bit(B_WRITING, &b->state) ||
+ test_bit(B_DIRTY, &b->state))
+ return 1;
+ }
+
+ if (b->hold_count)
+ return 1;
+
+ __make_buffer_clean(b);
+ __unlink_buffer(b);
+ __free_buffer_wake(b);
+
+ return 0;
+}
+
+static void __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
+ struct shrink_control *sc)
+{
+ int l;
+ struct dm_buffer *b, *tmp;
+
+ for (l = 0; l < LIST_SIZE; l++) {
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[l], lru_list)
+ if (!__cleanup_old_buffer(b, sc->gfp_mask, 0) &&
+ !--nr_to_scan)
+ return;
+ dm_bufio_cond_resched();
+ }
+}
+
+static int shrink(struct shrinker *shrinker, struct shrink_control *sc)
+{
+ struct dm_bufio_client *c =
+ container_of(shrinker, struct dm_bufio_client, shrinker);
+ unsigned long r;
+ unsigned long nr_to_scan = sc->nr_to_scan;
+
+ if (sc->gfp_mask & __GFP_IO)
+ dm_bufio_lock(c);
+ else if (!dm_bufio_trylock(c))
+ return !nr_to_scan ? 0 : -1;
+
+ if (nr_to_scan)
+ __scan(c, nr_to_scan, sc);
+
+ r = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];
+ if (r > INT_MAX)
+ r = INT_MAX;
+
+ dm_bufio_unlock(c);
+
+ return r;
+}
+
+/*
+ * Create the buffering interface
+ */
+struct dm_bufio_client *dm_bufio_client_create(struct block_device *bdev, unsigned block_size,
+ unsigned reserved_buffers, unsigned aux_size,
+ void (*alloc_callback)(struct dm_buffer *),
+ void (*write_callback)(struct dm_buffer *))
+{
+ int r;
+ struct dm_bufio_client *c;
+ unsigned i;
+
+ BUG_ON(block_size < 1 << SECTOR_SHIFT ||
+ (block_size & (block_size - 1)));
+
+ c = kmalloc(sizeof(*c), GFP_KERNEL);
+ if (!c) {
+ r = -ENOMEM;
+ goto bad_client;
+ }
+ c->cache_hash = vmalloc(sizeof(struct hlist_head) << DM_BUFIO_HASH_BITS);
+ if (!c->cache_hash) {
+ r = -ENOMEM;
+ goto bad_hash;
+ }
+
+ c->bdev = bdev;
+ c->block_size = block_size;
+ c->sectors_per_block_bits = ffs(block_size) - 1 - SECTOR_SHIFT;
+ c->pages_per_block_bits = (ffs(block_size) - 1 >= PAGE_SHIFT) ?
+ ffs(block_size) - 1 - PAGE_SHIFT : 0;
+ c->blocks_per_page_bits = (ffs(block_size) - 1 < PAGE_SHIFT ?
+ PAGE_SHIFT - (ffs(block_size) - 1) : 0);
+
+ c->aux_size = aux_size;
+ c->alloc_callback = alloc_callback;
+ c->write_callback = write_callback;
+
+ for (i = 0; i < LIST_SIZE; i++) {
+ INIT_LIST_HEAD(&c->lru[i]);
+ c->n_buffers[i] = 0;
+ }
+
+ for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
+ INIT_HLIST_HEAD(&c->cache_hash[i]);
+
+ mutex_init(&c->lock);
+ INIT_LIST_HEAD(&c->reserved_buffers);
+ c->need_reserved_buffers = reserved_buffers;
+
+ init_waitqueue_head(&c->free_buffer_wait);
+ c->async_write_error = 0;
+
+ c->dm_io = dm_io_client_create();
+ if (IS_ERR(c->dm_io)) {
+ r = PTR_ERR(c->dm_io);
+ goto bad_dm_io;
+ }
+
+ mutex_lock(&dm_bufio_clients_lock);
+ if (c->blocks_per_page_bits) {
+ if (!DM_BUFIO_CACHE_NAME(c)) {
+ DM_BUFIO_CACHE_NAME(c) = kasprintf(GFP_KERNEL, "dm_bufio_cache-%u", c->block_size);
+ if (!DM_BUFIO_CACHE_NAME(c)) {
+ r = -ENOMEM;
+ mutex_unlock(&dm_bufio_clients_lock);
+ goto bad_cache;
+ }
+ }
+
+ if (!DM_BUFIO_CACHE(c)) {
+ DM_BUFIO_CACHE(c) = kmem_cache_create(DM_BUFIO_CACHE_NAME(c),
+ c->block_size,
+ c->block_size, 0, NULL);
+ if (!DM_BUFIO_CACHE(c)) {
+ r = -ENOMEM;
+ mutex_unlock(&dm_bufio_clients_lock);
+ goto bad_cache;
+ }
+ }
+ }
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ while (c->need_reserved_buffers) {
+ struct dm_buffer *b = alloc_buffer(c, GFP_KERNEL);
+
+ if (!b) {
+ r = -ENOMEM;
+ goto bad_buffer;
+ }
+ __free_buffer_wake(b);
+ }
+
+ mutex_lock(&dm_bufio_clients_lock);
+ dm_bufio_client_count++;
+ list_add(&c->client_list, &dm_bufio_all_clients);
+ __cache_size_refresh();
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ c->shrinker.shrink = shrink;
+ c->shrinker.seeks = 1;
+ c->shrinker.batch = 0;
+ register_shrinker(&c->shrinker);
+
+ return c;
+
+bad_buffer:
+bad_cache:
+ while (!list_empty(&c->reserved_buffers)) {
+ struct dm_buffer *b = list_entry(c->reserved_buffers.next,
+ struct dm_buffer, lru_list);
+ list_del(&b->lru_list);
+ free_buffer(b);
+ }
+ dm_io_client_destroy(c->dm_io);
+bad_dm_io:
+ vfree(c->cache_hash);
+bad_hash:
+ kfree(c);
+bad_client:
+ return ERR_PTR(r);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_client_create);
+
+/*
+ * Free the buffering interface.
+ * It is required that there are no references on any buffers.
+ */
+void dm_bufio_client_destroy(struct dm_bufio_client *c)
+{
+ unsigned i;
+
+ drop_buffers(c);
+
+ unregister_shrinker(&c->shrinker);
+
+ mutex_lock(&dm_bufio_clients_lock);
+
+ list_del(&c->client_list);
+ dm_bufio_client_count--;
+ __cache_size_refresh();
+
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
+ BUG_ON(!hlist_empty(&c->cache_hash[i]));
+
+ BUG_ON(c->need_reserved_buffers);
+
+ while (!list_empty(&c->reserved_buffers)) {
+ struct dm_buffer *b = list_entry(c->reserved_buffers.next,
+ struct dm_buffer, lru_list);
+ list_del(&b->lru_list);
+ free_buffer(b);
+ }
+
+ for (i = 0; i < LIST_SIZE; i++)
+ if (c->n_buffers[i])
+ DMERR("leaked buffer count %d: %ld", i, c->n_buffers[i]);
+
+ for (i = 0; i < LIST_SIZE; i++)
+ BUG_ON(c->n_buffers[i]);
+
+ dm_io_client_destroy(c->dm_io);
+ vfree(c->cache_hash);
+ kfree(c);
+}
+EXPORT_SYMBOL_GPL(dm_bufio_client_destroy);
+
+static void cleanup_old_buffers(void)
+{
+ unsigned long max_age = dm_bufio_max_age;
+ struct dm_bufio_client *c;
+
+ barrier();
+
+ if (max_age > ULONG_MAX / HZ)
+ max_age = ULONG_MAX / HZ;
+
+ mutex_lock(&dm_bufio_clients_lock);
+ list_for_each_entry(c, &dm_bufio_all_clients, client_list) {
+ if (!dm_bufio_trylock(c))
+ continue;
+
+ while (!list_empty(&c->lru[LIST_CLEAN])) {
+ struct dm_buffer *b;
+ b = list_entry(c->lru[LIST_CLEAN].prev,
+ struct dm_buffer, lru_list);
+ if (__cleanup_old_buffer(b, 0, max_age * HZ))
+ break;
+ dm_bufio_cond_resched();
+ }
+
+ dm_bufio_unlock(c);
+ dm_bufio_cond_resched();
+ }
+ mutex_unlock(&dm_bufio_clients_lock);
+}
+
+static struct workqueue_struct *dm_bufio_wq;
+static struct delayed_work dm_bufio_work;
+
+static void work_fn(struct work_struct *w)
+{
+ cleanup_old_buffers();
+
+ queue_delayed_work(dm_bufio_wq, &dm_bufio_work,
+ DM_BUFIO_WORK_TIMER_SECS * HZ);
+}
+
+/*----------------------------------------------------------------
+ * Module setup
+ *--------------------------------------------------------------*/
+
+/*
+ * This is called only once for the whole dm_bufio module.
+ * It initializes memory limit.
+ */
+static int __init dm_bufio_init(void)
+{
+ __u64 mem;
+
+ memset(&dm_bufio_caches, 0, sizeof dm_bufio_caches);
+ memset(&dm_bufio_cache_names, 0, sizeof dm_bufio_cache_names);
+
+ mem = (__u64)((totalram_pages - totalhigh_pages) *
+ DM_BUFIO_MEMORY_PERCENT / 100) << PAGE_SHIFT;
+
+ if (mem > ULONG_MAX)
+ mem = ULONG_MAX;
+
+#ifdef CONFIG_MMU
+ /*
+ * Get the size of vmalloc space the same way as VMALLOC_TOTAL
+ * in fs/proc/internal.h
+ */
+ if (mem > (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100)
+ mem = (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100;
+#endif
+
+ dm_bufio_default_cache_size = mem;
+
+ mutex_lock(&dm_bufio_clients_lock);
+ __cache_size_refresh();
+ mutex_unlock(&dm_bufio_clients_lock);
+
+ dm_bufio_wq = create_singlethread_workqueue("dm_bufio_cache");
+ if (!dm_bufio_wq)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&dm_bufio_work, work_fn);
+ queue_delayed_work(dm_bufio_wq, &dm_bufio_work,
+ DM_BUFIO_WORK_TIMER_SECS * HZ);
+
+ return 0;
+}
+
+/*
+ * This is called once when unloading the dm_bufio module.
+ */
+static void __exit dm_bufio_exit(void)
+{
+ int bug = 0;
+ int i;
+
+ cancel_delayed_work_sync(&dm_bufio_work);
+ destroy_workqueue(dm_bufio_wq);
+
+ for (i = 0; i < ARRAY_SIZE(dm_bufio_caches); i++) {
+ struct kmem_cache *kc = dm_bufio_caches[i];
+
+ if (kc)
+ kmem_cache_destroy(kc);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(dm_bufio_cache_names); i++)
+ kfree(dm_bufio_cache_names[i]);
+
+ if (dm_bufio_client_count) {
+ DMCRIT("%s: dm_bufio_client_count leaked: %d",
+ __func__, dm_bufio_client_count);
+ bug = 1;
+ }
+
+ if (dm_bufio_current_allocated) {
+ DMCRIT("%s: dm_bufio_current_allocated leaked: %lu",
+ __func__, dm_bufio_current_allocated);
+ bug = 1;
+ }
+
+ if (dm_bufio_allocated_get_free_pages) {
+ DMCRIT("%s: dm_bufio_allocated_get_free_pages leaked: %lu",
+ __func__, dm_bufio_allocated_get_free_pages);
+ bug = 1;
+ }
+
+ if (dm_bufio_allocated_vmalloc) {
+ DMCRIT("%s: dm_bufio_vmalloc leaked: %lu",
+ __func__, dm_bufio_allocated_vmalloc);
+ bug = 1;
+ }
+
+ if (bug)
+ BUG();
+}
+
+module_init(dm_bufio_init)
+module_exit(dm_bufio_exit)
+
+module_param_named(max_cache_size_bytes, dm_bufio_cache_size, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(max_cache_size_bytes, "Size of metadata cache");
+
+module_param_named(max_age_seconds, dm_bufio_max_age, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(max_age_seconds, "Max age of a buffer in seconds");
+
+module_param_named(peak_allocated_bytes, dm_bufio_peak_allocated, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(peak_allocated_bytes, "Tracks the maximum allocated memory");
+
+module_param_named(allocated_kmem_cache_bytes, dm_bufio_allocated_kmem_cache, ulong, S_IRUGO);
+MODULE_PARM_DESC(allocated_kmem_cache_bytes, "Memory allocated with kmem_cache_alloc");
+
+module_param_named(allocated_get_free_pages_bytes, dm_bufio_allocated_get_free_pages, ulong, S_IRUGO);
+MODULE_PARM_DESC(allocated_get_free_pages_bytes, "Memory allocated with get_free_pages");
+
+module_param_named(allocated_vmalloc_bytes, dm_bufio_allocated_vmalloc, ulong, S_IRUGO);
+MODULE_PARM_DESC(allocated_vmalloc_bytes, "Memory allocated with vmalloc");
+
+module_param_named(current_allocated_bytes, dm_bufio_current_allocated, ulong, S_IRUGO);
+MODULE_PARM_DESC(current_allocated_bytes, "Memory currently used by the cache");
+
+MODULE_AUTHOR("Mikulas Patocka <dm-devel@redhat.com>");
+MODULE_DESCRIPTION(DM_NAME " buffered I/O library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm-bufio.h b/drivers/md/dm-bufio.h
new file mode 100644
index 0000000..5c4c3a0
--- /dev/null
+++ b/drivers/md/dm-bufio.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2009-2011 Red Hat, Inc.
+ *
+ * Author: Mikulas Patocka <mpatocka@redhat.com>
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_BUFIO_H
+#define DM_BUFIO_H
+
+#include <linux/blkdev.h>
+#include <linux/types.h>
+
+/*----------------------------------------------------------------*/
+
+struct dm_bufio_client;
+struct dm_buffer;
+
+/*
+ * Create a buffered IO cache on a given device
+ */
+struct dm_bufio_client *
+dm_bufio_client_create(struct block_device *bdev, unsigned block_size,
+ unsigned reserved_buffers, unsigned aux_size,
+ void (*alloc_callback)(struct dm_buffer *),
+ void (*write_callback)(struct dm_buffer *));
+
+/*
+ * Release a buffered IO cache.
+ */
+void dm_bufio_client_destroy(struct dm_bufio_client *c);
+
+/*
+ * WARNING: to avoid deadlocks, these conditions are observed:
+ *
+ * - At most one thread can hold at most "reserved_buffers" simultaneously.
+ * - Each other threads can hold at most one buffer.
+ * - Threads which call only dm_bufio_get can hold unlimited number of
+ * buffers.
+ */
+
+/*
+ * Read a given block from disk. Returns pointer to data. Returns a
+ * pointer to dm_buffer that can be used to release the buffer or to make
+ * it dirty.
+ */
+void *dm_bufio_read(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp);
+
+/*
+ * Like dm_bufio_read, but return buffer from cache, don't read
+ * it. If the buffer is not in the cache, return NULL.
+ */
+void *dm_bufio_get(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp);
+
+/*
+ * Like dm_bufio_read, but don't read anything from the disk. It is
+ * expected that the caller initializes the buffer and marks it dirty.
+ */
+void *dm_bufio_new(struct dm_bufio_client *c, sector_t block,
+ struct dm_buffer **bp);
+
+/*
+ * Release a reference obtained with dm_bufio_{read,get,new}. The data
+ * pointer and dm_buffer pointer is no longer valid after this call.
+ */
+void dm_bufio_release(struct dm_buffer *b);
+
+/*
+ * Mark a buffer dirty. It should be called after the buffer is modified.
+ *
+ * In case of memory pressure, the buffer may be written after
+ * dm_bufio_mark_buffer_dirty, but before dm_bufio_write_dirty_buffers. So
+ * dm_bufio_write_dirty_buffers guarantees that the buffer is on-disk but
+ * the actual writing may occur earlier.
+ */
+void dm_bufio_mark_buffer_dirty(struct dm_buffer *b);
+
+/*
+ * Initiate writing of dirty buffers, without waiting for completion.
+ */
+void dm_bufio_write_dirty_buffers_async(struct dm_bufio_client *c);
+
+/*
+ * Write all dirty buffers. Guarantees that all dirty buffers created prior
+ * to this call are on disk when this call exits.
+ */
+int dm_bufio_write_dirty_buffers(struct dm_bufio_client *c);
+
+/*
+ * Send an empty write barrier to the device to flush hardware disk cache.
+ */
+int dm_bufio_issue_flush(struct dm_bufio_client *c);
+
+/*
+ * Like dm_bufio_release but also move the buffer to the new
+ * block. dm_bufio_write_dirty_buffers is needed to commit the new block.
+ */
+void dm_bufio_release_move(struct dm_buffer *b, sector_t new_block);
+
+unsigned dm_bufio_get_block_size(struct dm_bufio_client *c);
+sector_t dm_bufio_get_device_size(struct dm_bufio_client *c);
+sector_t dm_bufio_get_block_number(struct dm_buffer *b);
+void *dm_bufio_get_block_data(struct dm_buffer *b);
+void *dm_bufio_get_aux_data(struct dm_buffer *b);
+struct dm_bufio_client *dm_bufio_get_client(struct dm_buffer *b);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c
index 2e9a3ca..31c2dc2 100644
--- a/drivers/md/dm-ioctl.c
+++ b/drivers/md/dm-ioctl.c
@@ -1215,6 +1215,7 @@
struct hash_cell *hc;
struct dm_table *t;
struct mapped_device *md;
+ struct target_type *immutable_target_type;
md = find_device(param);
if (!md)
@@ -1230,6 +1231,16 @@
goto out;
}
+ immutable_target_type = dm_get_immutable_target_type(md);
+ if (immutable_target_type &&
+ (immutable_target_type != dm_table_get_immutable_target_type(t))) {
+ DMWARN("can't replace immutable target type %s",
+ immutable_target_type->name);
+ dm_table_destroy(t);
+ r = -EINVAL;
+ goto out;
+ }
+
/* Protect md->type and md->queue against concurrent table loads. */
dm_lock_md_type(md);
if (dm_get_md_type(md) == DM_TYPE_NONE)
diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index 32ac708..bed444c 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -66,6 +66,8 @@
struct list_head pages_jobs;
};
+static struct page_list zero_page_list;
+
static void wake(struct dm_kcopyd_client *kc)
{
queue_work(kc->kcopyd_wq, &kc->kcopyd_work);
@@ -254,6 +256,9 @@
if (!_job_cache)
return -ENOMEM;
+ zero_page_list.next = &zero_page_list;
+ zero_page_list.page = ZERO_PAGE(0);
+
return 0;
}
@@ -322,7 +327,7 @@
dm_kcopyd_notify_fn fn = job->fn;
struct dm_kcopyd_client *kc = job->kc;
- if (job->pages)
+ if (job->pages && job->pages != &zero_page_list)
kcopyd_put_pages(kc, job->pages);
/*
* If this is the master job, the sub jobs have already
@@ -484,6 +489,8 @@
atomic_inc(&kc->nr_jobs);
if (unlikely(!job->source.count))
push(&kc->complete_jobs, job);
+ else if (job->pages == &zero_page_list)
+ push(&kc->io_jobs, job);
else
push(&kc->pages_jobs, job);
wake(kc);
@@ -592,14 +599,20 @@
job->flags = flags;
job->read_err = 0;
job->write_err = 0;
- job->rw = READ;
-
- job->source = *from;
job->num_dests = num_dests;
memcpy(&job->dests, dests, sizeof(*dests) * num_dests);
- job->pages = NULL;
+ if (from) {
+ job->source = *from;
+ job->pages = NULL;
+ job->rw = READ;
+ } else {
+ memset(&job->source, 0, sizeof job->source);
+ job->source.count = job->dests[0].count;
+ job->pages = &zero_page_list;
+ job->rw = WRITE;
+ }
job->fn = fn;
job->context = context;
@@ -617,6 +630,14 @@
}
EXPORT_SYMBOL(dm_kcopyd_copy);
+int dm_kcopyd_zero(struct dm_kcopyd_client *kc,
+ unsigned num_dests, struct dm_io_region *dests,
+ unsigned flags, dm_kcopyd_notify_fn fn, void *context)
+{
+ return dm_kcopyd_copy(kc, NULL, num_dests, dests, flags, fn, context);
+}
+EXPORT_SYMBOL(dm_kcopyd_zero);
+
void *dm_kcopyd_prepare_callback(struct dm_kcopyd_client *kc,
dm_kcopyd_notify_fn fn, void *context)
{
diff --git a/drivers/md/dm-log-userspace-base.c b/drivers/md/dm-log-userspace-base.c
index 1021c89..8db3862 100644
--- a/drivers/md/dm-log-userspace-base.c
+++ b/drivers/md/dm-log-userspace-base.c
@@ -30,6 +30,7 @@
struct log_c {
struct dm_target *ti;
+ struct dm_dev *log_dev;
uint32_t region_size;
region_t region_count;
uint64_t luid;
@@ -146,7 +147,7 @@
* <UUID> <other args>
* Where 'other args' is the userspace implementation specific log
* arguments. An example might be:
- * <UUID> clustered_disk <arg count> <log dev> <region_size> [[no]sync]
+ * <UUID> clustered-disk <arg count> <log dev> <region_size> [[no]sync]
*
* So, this module will strip off the <UUID> for identification purposes
* when communicating with userspace about a log; but will pass on everything
@@ -161,13 +162,15 @@
struct log_c *lc = NULL;
uint64_t rdata;
size_t rdata_size = sizeof(rdata);
+ char *devices_rdata = NULL;
+ size_t devices_rdata_size = DM_NAME_LEN;
if (argc < 3) {
DMWARN("Too few arguments to userspace dirty log");
return -EINVAL;
}
- lc = kmalloc(sizeof(*lc), GFP_KERNEL);
+ lc = kzalloc(sizeof(*lc), GFP_KERNEL);
if (!lc) {
DMWARN("Unable to allocate userspace log context.");
return -ENOMEM;
@@ -195,9 +198,19 @@
return str_size;
}
- /* Send table string */
+ devices_rdata = kzalloc(devices_rdata_size, GFP_KERNEL);
+ if (!devices_rdata) {
+ DMERR("Failed to allocate memory for device information");
+ r = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * Send table string and get back any opened device.
+ */
r = dm_consult_userspace(lc->uuid, lc->luid, DM_ULOG_CTR,
- ctr_str, str_size, NULL, NULL);
+ ctr_str, str_size,
+ devices_rdata, &devices_rdata_size);
if (r < 0) {
if (r == -ESRCH)
@@ -220,7 +233,20 @@
lc->region_size = (uint32_t)rdata;
lc->region_count = dm_sector_div_up(ti->len, lc->region_size);
+ if (devices_rdata_size) {
+ if (devices_rdata[devices_rdata_size - 1] != '\0') {
+ DMERR("DM_ULOG_CTR device return string not properly terminated");
+ r = -EINVAL;
+ goto out;
+ }
+ r = dm_get_device(ti, devices_rdata,
+ dm_table_get_mode(ti->table), &lc->log_dev);
+ if (r)
+ DMERR("Failed to register %s with device-mapper",
+ devices_rdata);
+ }
out:
+ kfree(devices_rdata);
if (r) {
kfree(lc);
kfree(ctr_str);
@@ -241,6 +267,9 @@
NULL, 0,
NULL, NULL);
+ if (lc->log_dev)
+ dm_put_device(lc->ti, lc->log_dev);
+
kfree(lc->usr_argv_str);
kfree(lc);
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 37a3726..11fa96d 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -1017,30 +1017,56 @@
struct raid_set *rs = ti->private;
unsigned raid_param_cnt = 1; /* at least 1 for chunksize */
unsigned sz = 0;
- int i;
+ int i, array_in_sync = 0;
sector_t sync;
switch (type) {
case STATUSTYPE_INFO:
DMEMIT("%s %d ", rs->raid_type->name, rs->md.raid_disks);
- for (i = 0; i < rs->md.raid_disks; i++) {
- if (test_bit(Faulty, &rs->dev[i].rdev.flags))
- DMEMIT("D");
- else if (test_bit(In_sync, &rs->dev[i].rdev.flags))
- DMEMIT("A");
- else
- DMEMIT("a");
- }
-
if (test_bit(MD_RECOVERY_RUNNING, &rs->md.recovery))
sync = rs->md.curr_resync_completed;
else
sync = rs->md.recovery_cp;
- if (sync > rs->md.resync_max_sectors)
+ if (sync >= rs->md.resync_max_sectors) {
+ array_in_sync = 1;
sync = rs->md.resync_max_sectors;
+ } else {
+ /*
+ * The array may be doing an initial sync, or it may
+ * be rebuilding individual components. If all the
+ * devices are In_sync, then it is the array that is
+ * being initialized.
+ */
+ for (i = 0; i < rs->md.raid_disks; i++)
+ if (!test_bit(In_sync, &rs->dev[i].rdev.flags))
+ array_in_sync = 1;
+ }
+ /*
+ * Status characters:
+ * 'D' = Dead/Failed device
+ * 'a' = Alive but not in-sync
+ * 'A' = Alive and in-sync
+ */
+ for (i = 0; i < rs->md.raid_disks; i++) {
+ if (test_bit(Faulty, &rs->dev[i].rdev.flags))
+ DMEMIT("D");
+ else if (!array_in_sync ||
+ !test_bit(In_sync, &rs->dev[i].rdev.flags))
+ DMEMIT("a");
+ else
+ DMEMIT("A");
+ }
+ /*
+ * In-sync ratio:
+ * The in-sync ratio shows the progress of:
+ * - Initializing the array
+ * - Rebuilding a subset of devices of the array
+ * The user can distinguish between the two by referring
+ * to the status characters.
+ */
DMEMIT(" %llu/%llu",
(unsigned long long) sync,
(unsigned long long) rs->md.resync_max_sectors);
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index bc04518..8e91321 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -54,7 +54,9 @@
sector_t *highs;
struct dm_target *targets;
+ struct target_type *immutable_target_type;
unsigned integrity_supported:1;
+ unsigned singleton:1;
/*
* Indicates the rw permissions for the new logical
@@ -740,6 +742,12 @@
char **argv;
struct dm_target *tgt;
+ if (t->singleton) {
+ DMERR("%s: target type %s must appear alone in table",
+ dm_device_name(t->md), t->targets->type->name);
+ return -EINVAL;
+ }
+
if ((r = check_space(t)))
return r;
@@ -758,6 +766,36 @@
return -EINVAL;
}
+ if (dm_target_needs_singleton(tgt->type)) {
+ if (t->num_targets) {
+ DMERR("%s: target type %s must appear alone in table",
+ dm_device_name(t->md), type);
+ return -EINVAL;
+ }
+ t->singleton = 1;
+ }
+
+ if (dm_target_always_writeable(tgt->type) && !(t->mode & FMODE_WRITE)) {
+ DMERR("%s: target type %s may not be included in read-only tables",
+ dm_device_name(t->md), type);
+ return -EINVAL;
+ }
+
+ if (t->immutable_target_type) {
+ if (t->immutable_target_type != tgt->type) {
+ DMERR("%s: immutable target type %s cannot be mixed with other target types",
+ dm_device_name(t->md), t->immutable_target_type->name);
+ return -EINVAL;
+ }
+ } else if (dm_target_is_immutable(tgt->type)) {
+ if (t->num_targets) {
+ DMERR("%s: immutable target type %s cannot be mixed with other target types",
+ dm_device_name(t->md), tgt->type->name);
+ return -EINVAL;
+ }
+ t->immutable_target_type = tgt->type;
+ }
+
tgt->table = t;
tgt->begin = start;
tgt->len = len;
@@ -915,6 +953,11 @@
return t->type;
}
+struct target_type *dm_table_get_immutable_target_type(struct dm_table *t)
+{
+ return t->immutable_target_type;
+}
+
bool dm_table_request_based(struct dm_table *t)
{
return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
@@ -1299,6 +1342,31 @@
return 1;
}
+static int device_is_nonrot(struct dm_target *ti, struct dm_dev *dev,
+ sector_t start, sector_t len, void *data)
+{
+ struct request_queue *q = bdev_get_queue(dev->bdev);
+
+ return q && blk_queue_nonrot(q);
+}
+
+static bool dm_table_is_nonrot(struct dm_table *t)
+{
+ struct dm_target *ti;
+ unsigned i = 0;
+
+ /* Ensure that all underlying device are non-rotational. */
+ while (i < dm_table_get_num_targets(t)) {
+ ti = dm_table_get_target(t, i++);
+
+ if (!ti->type->iterate_devices ||
+ !ti->type->iterate_devices(ti, device_is_nonrot, NULL))
+ return 0;
+ }
+
+ return 1;
+}
+
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
struct queue_limits *limits)
{
@@ -1324,6 +1392,11 @@
if (!dm_table_discard_zeroes_data(t))
q->limits.discard_zeroes_data = 0;
+ if (dm_table_is_nonrot(t))
+ queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
+
dm_table_set_integrity(t);
/*
diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c
new file mode 100644
index 0000000..59c4f04
--- /dev/null
+++ b/drivers/md/dm-thin-metadata.c
@@ -0,0 +1,1391 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-thin-metadata.h"
+#include "persistent-data/dm-btree.h"
+#include "persistent-data/dm-space-map.h"
+#include "persistent-data/dm-space-map-disk.h"
+#include "persistent-data/dm-transaction-manager.h"
+
+#include <linux/list.h>
+#include <linux/device-mapper.h>
+#include <linux/workqueue.h>
+
+/*--------------------------------------------------------------------------
+ * As far as the metadata goes, there is:
+ *
+ * - A superblock in block zero, taking up fewer than 512 bytes for
+ * atomic writes.
+ *
+ * - A space map managing the metadata blocks.
+ *
+ * - A space map managing the data blocks.
+ *
+ * - A btree mapping our internal thin dev ids onto struct disk_device_details.
+ *
+ * - A hierarchical btree, with 2 levels which effectively maps (thin
+ * dev id, virtual block) -> block_time. Block time is a 64-bit
+ * field holding the time in the low 24 bits, and block in the top 48
+ * bits.
+ *
+ * BTrees consist solely of btree_nodes, that fill a block. Some are
+ * internal nodes, as such their values are a __le64 pointing to other
+ * nodes. Leaf nodes can store data of any reasonable size (ie. much
+ * smaller than the block size). The nodes consist of the header,
+ * followed by an array of keys, followed by an array of values. We have
+ * to binary search on the keys so they're all held together to help the
+ * cpu cache.
+ *
+ * Space maps have 2 btrees:
+ *
+ * - One maps a uint64_t onto a struct index_entry. Which points to a
+ * bitmap block, and has some details about how many free entries there
+ * are etc.
+ *
+ * - The bitmap blocks have a header (for the checksum). Then the rest
+ * of the block is pairs of bits. With the meaning being:
+ *
+ * 0 - ref count is 0
+ * 1 - ref count is 1
+ * 2 - ref count is 2
+ * 3 - ref count is higher than 2
+ *
+ * - If the count is higher than 2 then the ref count is entered in a
+ * second btree that directly maps the block_address to a uint32_t ref
+ * count.
+ *
+ * The space map metadata variant doesn't have a bitmaps btree. Instead
+ * it has one single blocks worth of index_entries. This avoids
+ * recursive issues with the bitmap btree needing to allocate space in
+ * order to insert. With a small data block size such as 64k the
+ * metadata support data devices that are hundreds of terrabytes.
+ *
+ * The space maps allocate space linearly from front to back. Space that
+ * is freed in a transaction is never recycled within that transaction.
+ * To try and avoid fragmenting _free_ space the allocator always goes
+ * back and fills in gaps.
+ *
+ * All metadata io is in THIN_METADATA_BLOCK_SIZE sized/aligned chunks
+ * from the block manager.
+ *--------------------------------------------------------------------------*/
+
+#define DM_MSG_PREFIX "thin metadata"
+
+#define THIN_SUPERBLOCK_MAGIC 27022010
+#define THIN_SUPERBLOCK_LOCATION 0
+#define THIN_VERSION 1
+#define THIN_METADATA_CACHE_SIZE 64
+#define SECTOR_TO_BLOCK_SHIFT 3
+
+/* This should be plenty */
+#define SPACE_MAP_ROOT_SIZE 128
+
+/*
+ * Little endian on-disk superblock and device details.
+ */
+struct thin_disk_superblock {
+ __le32 csum; /* Checksum of superblock except for this field. */
+ __le32 flags;
+ __le64 blocknr; /* This block number, dm_block_t. */
+
+ __u8 uuid[16];
+ __le64 magic;
+ __le32 version;
+ __le32 time;
+
+ __le64 trans_id;
+
+ /*
+ * Root held by userspace transactions.
+ */
+ __le64 held_root;
+
+ __u8 data_space_map_root[SPACE_MAP_ROOT_SIZE];
+ __u8 metadata_space_map_root[SPACE_MAP_ROOT_SIZE];
+
+ /*
+ * 2-level btree mapping (dev_id, (dev block, time)) -> data block
+ */
+ __le64 data_mapping_root;
+
+ /*
+ * Device detail root mapping dev_id -> device_details
+ */
+ __le64 device_details_root;
+
+ __le32 data_block_size; /* In 512-byte sectors. */
+
+ __le32 metadata_block_size; /* In 512-byte sectors. */
+ __le64 metadata_nr_blocks;
+
+ __le32 compat_flags;
+ __le32 compat_ro_flags;
+ __le32 incompat_flags;
+} __packed;
+
+struct disk_device_details {
+ __le64 mapped_blocks;
+ __le64 transaction_id; /* When created. */
+ __le32 creation_time;
+ __le32 snapshotted_time;
+} __packed;
+
+struct dm_pool_metadata {
+ struct hlist_node hash;
+
+ struct block_device *bdev;
+ struct dm_block_manager *bm;
+ struct dm_space_map *metadata_sm;
+ struct dm_space_map *data_sm;
+ struct dm_transaction_manager *tm;
+ struct dm_transaction_manager *nb_tm;
+
+ /*
+ * Two-level btree.
+ * First level holds thin_dev_t.
+ * Second level holds mappings.
+ */
+ struct dm_btree_info info;
+
+ /*
+ * Non-blocking version of the above.
+ */
+ struct dm_btree_info nb_info;
+
+ /*
+ * Just the top level for deleting whole devices.
+ */
+ struct dm_btree_info tl_info;
+
+ /*
+ * Just the bottom level for creating new devices.
+ */
+ struct dm_btree_info bl_info;
+
+ /*
+ * Describes the device details btree.
+ */
+ struct dm_btree_info details_info;
+
+ struct rw_semaphore root_lock;
+ uint32_t time;
+ int need_commit;
+ dm_block_t root;
+ dm_block_t details_root;
+ struct list_head thin_devices;
+ uint64_t trans_id;
+ unsigned long flags;
+ sector_t data_block_size;
+};
+
+struct dm_thin_device {
+ struct list_head list;
+ struct dm_pool_metadata *pmd;
+ dm_thin_id id;
+
+ int open_count;
+ int changed;
+ uint64_t mapped_blocks;
+ uint64_t transaction_id;
+ uint32_t creation_time;
+ uint32_t snapshotted_time;
+};
+
+/*----------------------------------------------------------------
+ * superblock validator
+ *--------------------------------------------------------------*/
+
+#define SUPERBLOCK_CSUM_XOR 160774
+
+static void sb_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct thin_disk_superblock *disk_super = dm_block_data(b);
+
+ disk_super->blocknr = cpu_to_le64(dm_block_location(b));
+ disk_super->csum = cpu_to_le32(dm_bm_checksum(&disk_super->flags,
+ block_size - sizeof(__le32),
+ SUPERBLOCK_CSUM_XOR));
+}
+
+static int sb_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct thin_disk_superblock *disk_super = dm_block_data(b);
+ __le32 csum_le;
+
+ if (dm_block_location(b) != le64_to_cpu(disk_super->blocknr)) {
+ DMERR("sb_check failed: blocknr %llu: "
+ "wanted %llu", le64_to_cpu(disk_super->blocknr),
+ (unsigned long long)dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ if (le64_to_cpu(disk_super->magic) != THIN_SUPERBLOCK_MAGIC) {
+ DMERR("sb_check failed: magic %llu: "
+ "wanted %llu", le64_to_cpu(disk_super->magic),
+ (unsigned long long)THIN_SUPERBLOCK_MAGIC);
+ return -EILSEQ;
+ }
+
+ csum_le = cpu_to_le32(dm_bm_checksum(&disk_super->flags,
+ block_size - sizeof(__le32),
+ SUPERBLOCK_CSUM_XOR));
+ if (csum_le != disk_super->csum) {
+ DMERR("sb_check failed: csum %u: wanted %u",
+ le32_to_cpu(csum_le), le32_to_cpu(disk_super->csum));
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+static struct dm_block_validator sb_validator = {
+ .name = "superblock",
+ .prepare_for_write = sb_prepare_for_write,
+ .check = sb_check
+};
+
+/*----------------------------------------------------------------
+ * Methods for the btree value types
+ *--------------------------------------------------------------*/
+
+static uint64_t pack_block_time(dm_block_t b, uint32_t t)
+{
+ return (b << 24) | t;
+}
+
+static void unpack_block_time(uint64_t v, dm_block_t *b, uint32_t *t)
+{
+ *b = v >> 24;
+ *t = v & ((1 << 24) - 1);
+}
+
+static void data_block_inc(void *context, void *value_le)
+{
+ struct dm_space_map *sm = context;
+ __le64 v_le;
+ uint64_t b;
+ uint32_t t;
+
+ memcpy(&v_le, value_le, sizeof(v_le));
+ unpack_block_time(le64_to_cpu(v_le), &b, &t);
+ dm_sm_inc_block(sm, b);
+}
+
+static void data_block_dec(void *context, void *value_le)
+{
+ struct dm_space_map *sm = context;
+ __le64 v_le;
+ uint64_t b;
+ uint32_t t;
+
+ memcpy(&v_le, value_le, sizeof(v_le));
+ unpack_block_time(le64_to_cpu(v_le), &b, &t);
+ dm_sm_dec_block(sm, b);
+}
+
+static int data_block_equal(void *context, void *value1_le, void *value2_le)
+{
+ __le64 v1_le, v2_le;
+ uint64_t b1, b2;
+ uint32_t t;
+
+ memcpy(&v1_le, value1_le, sizeof(v1_le));
+ memcpy(&v2_le, value2_le, sizeof(v2_le));
+ unpack_block_time(le64_to_cpu(v1_le), &b1, &t);
+ unpack_block_time(le64_to_cpu(v2_le), &b2, &t);
+
+ return b1 == b2;
+}
+
+static void subtree_inc(void *context, void *value)
+{
+ struct dm_btree_info *info = context;
+ __le64 root_le;
+ uint64_t root;
+
+ memcpy(&root_le, value, sizeof(root_le));
+ root = le64_to_cpu(root_le);
+ dm_tm_inc(info->tm, root);
+}
+
+static void subtree_dec(void *context, void *value)
+{
+ struct dm_btree_info *info = context;
+ __le64 root_le;
+ uint64_t root;
+
+ memcpy(&root_le, value, sizeof(root_le));
+ root = le64_to_cpu(root_le);
+ if (dm_btree_del(info, root))
+ DMERR("btree delete failed\n");
+}
+
+static int subtree_equal(void *context, void *value1_le, void *value2_le)
+{
+ __le64 v1_le, v2_le;
+ memcpy(&v1_le, value1_le, sizeof(v1_le));
+ memcpy(&v2_le, value2_le, sizeof(v2_le));
+
+ return v1_le == v2_le;
+}
+
+/*----------------------------------------------------------------*/
+
+static int superblock_all_zeroes(struct dm_block_manager *bm, int *result)
+{
+ int r;
+ unsigned i;
+ struct dm_block *b;
+ __le64 *data_le, zero = cpu_to_le64(0);
+ unsigned block_size = dm_bm_block_size(bm) / sizeof(__le64);
+
+ /*
+ * We can't use a validator here - it may be all zeroes.
+ */
+ r = dm_bm_read_lock(bm, THIN_SUPERBLOCK_LOCATION, NULL, &b);
+ if (r)
+ return r;
+
+ data_le = dm_block_data(b);
+ *result = 1;
+ for (i = 0; i < block_size; i++) {
+ if (data_le[i] != zero) {
+ *result = 0;
+ break;
+ }
+ }
+
+ return dm_bm_unlock(b);
+}
+
+static int init_pmd(struct dm_pool_metadata *pmd,
+ struct dm_block_manager *bm,
+ dm_block_t nr_blocks, int create)
+{
+ int r;
+ struct dm_space_map *sm, *data_sm;
+ struct dm_transaction_manager *tm;
+ struct dm_block *sblock;
+
+ if (create) {
+ r = dm_tm_create_with_sm(bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &tm, &sm, &sblock);
+ if (r < 0) {
+ DMERR("tm_create_with_sm failed");
+ return r;
+ }
+
+ data_sm = dm_sm_disk_create(tm, nr_blocks);
+ if (IS_ERR(data_sm)) {
+ DMERR("sm_disk_create failed");
+ r = PTR_ERR(data_sm);
+ goto bad;
+ }
+ } else {
+ struct thin_disk_superblock *disk_super = NULL;
+ size_t space_map_root_offset =
+ offsetof(struct thin_disk_superblock, metadata_space_map_root);
+
+ r = dm_tm_open_with_sm(bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, space_map_root_offset,
+ SPACE_MAP_ROOT_SIZE, &tm, &sm, &sblock);
+ if (r < 0) {
+ DMERR("tm_open_with_sm failed");
+ return r;
+ }
+
+ disk_super = dm_block_data(sblock);
+ data_sm = dm_sm_disk_open(tm, disk_super->data_space_map_root,
+ sizeof(disk_super->data_space_map_root));
+ if (IS_ERR(data_sm)) {
+ DMERR("sm_disk_open failed");
+ r = PTR_ERR(data_sm);
+ goto bad;
+ }
+ }
+
+
+ r = dm_tm_unlock(tm, sblock);
+ if (r < 0) {
+ DMERR("couldn't unlock superblock");
+ goto bad_data_sm;
+ }
+
+ pmd->bm = bm;
+ pmd->metadata_sm = sm;
+ pmd->data_sm = data_sm;
+ pmd->tm = tm;
+ pmd->nb_tm = dm_tm_create_non_blocking_clone(tm);
+ if (!pmd->nb_tm) {
+ DMERR("could not create clone tm");
+ r = -ENOMEM;
+ goto bad_data_sm;
+ }
+
+ pmd->info.tm = tm;
+ pmd->info.levels = 2;
+ pmd->info.value_type.context = pmd->data_sm;
+ pmd->info.value_type.size = sizeof(__le64);
+ pmd->info.value_type.inc = data_block_inc;
+ pmd->info.value_type.dec = data_block_dec;
+ pmd->info.value_type.equal = data_block_equal;
+
+ memcpy(&pmd->nb_info, &pmd->info, sizeof(pmd->nb_info));
+ pmd->nb_info.tm = pmd->nb_tm;
+
+ pmd->tl_info.tm = tm;
+ pmd->tl_info.levels = 1;
+ pmd->tl_info.value_type.context = &pmd->info;
+ pmd->tl_info.value_type.size = sizeof(__le64);
+ pmd->tl_info.value_type.inc = subtree_inc;
+ pmd->tl_info.value_type.dec = subtree_dec;
+ pmd->tl_info.value_type.equal = subtree_equal;
+
+ pmd->bl_info.tm = tm;
+ pmd->bl_info.levels = 1;
+ pmd->bl_info.value_type.context = pmd->data_sm;
+ pmd->bl_info.value_type.size = sizeof(__le64);
+ pmd->bl_info.value_type.inc = data_block_inc;
+ pmd->bl_info.value_type.dec = data_block_dec;
+ pmd->bl_info.value_type.equal = data_block_equal;
+
+ pmd->details_info.tm = tm;
+ pmd->details_info.levels = 1;
+ pmd->details_info.value_type.context = NULL;
+ pmd->details_info.value_type.size = sizeof(struct disk_device_details);
+ pmd->details_info.value_type.inc = NULL;
+ pmd->details_info.value_type.dec = NULL;
+ pmd->details_info.value_type.equal = NULL;
+
+ pmd->root = 0;
+
+ init_rwsem(&pmd->root_lock);
+ pmd->time = 0;
+ pmd->need_commit = 0;
+ pmd->details_root = 0;
+ pmd->trans_id = 0;
+ pmd->flags = 0;
+ INIT_LIST_HEAD(&pmd->thin_devices);
+
+ return 0;
+
+bad_data_sm:
+ dm_sm_destroy(data_sm);
+bad:
+ dm_tm_destroy(tm);
+ dm_sm_destroy(sm);
+
+ return r;
+}
+
+static int __begin_transaction(struct dm_pool_metadata *pmd)
+{
+ int r;
+ u32 features;
+ struct thin_disk_superblock *disk_super;
+ struct dm_block *sblock;
+
+ /*
+ * __maybe_commit_transaction() resets these
+ */
+ WARN_ON(pmd->need_commit);
+
+ /*
+ * We re-read the superblock every time. Shouldn't need to do this
+ * really.
+ */
+ r = dm_bm_read_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ return r;
+
+ disk_super = dm_block_data(sblock);
+ pmd->time = le32_to_cpu(disk_super->time);
+ pmd->root = le64_to_cpu(disk_super->data_mapping_root);
+ pmd->details_root = le64_to_cpu(disk_super->device_details_root);
+ pmd->trans_id = le64_to_cpu(disk_super->trans_id);
+ pmd->flags = le32_to_cpu(disk_super->flags);
+ pmd->data_block_size = le32_to_cpu(disk_super->data_block_size);
+
+ features = le32_to_cpu(disk_super->incompat_flags) & ~THIN_FEATURE_INCOMPAT_SUPP;
+ if (features) {
+ DMERR("could not access metadata due to "
+ "unsupported optional features (%lx).",
+ (unsigned long)features);
+ r = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * Check for read-only metadata to skip the following RDWR checks.
+ */
+ if (get_disk_ro(pmd->bdev->bd_disk))
+ goto out;
+
+ features = le32_to_cpu(disk_super->compat_ro_flags) & ~THIN_FEATURE_COMPAT_RO_SUPP;
+ if (features) {
+ DMERR("could not access metadata RDWR due to "
+ "unsupported optional features (%lx).",
+ (unsigned long)features);
+ r = -EINVAL;
+ }
+
+out:
+ dm_bm_unlock(sblock);
+ return r;
+}
+
+static int __write_changed_details(struct dm_pool_metadata *pmd)
+{
+ int r;
+ struct dm_thin_device *td, *tmp;
+ struct disk_device_details details;
+ uint64_t key;
+
+ list_for_each_entry_safe(td, tmp, &pmd->thin_devices, list) {
+ if (!td->changed)
+ continue;
+
+ key = td->id;
+
+ details.mapped_blocks = cpu_to_le64(td->mapped_blocks);
+ details.transaction_id = cpu_to_le64(td->transaction_id);
+ details.creation_time = cpu_to_le32(td->creation_time);
+ details.snapshotted_time = cpu_to_le32(td->snapshotted_time);
+ __dm_bless_for_disk(&details);
+
+ r = dm_btree_insert(&pmd->details_info, pmd->details_root,
+ &key, &details, &pmd->details_root);
+ if (r)
+ return r;
+
+ if (td->open_count)
+ td->changed = 0;
+ else {
+ list_del(&td->list);
+ kfree(td);
+ }
+
+ pmd->need_commit = 1;
+ }
+
+ return 0;
+}
+
+static int __commit_transaction(struct dm_pool_metadata *pmd)
+{
+ /*
+ * FIXME: Associated pool should be made read-only on failure.
+ */
+ int r;
+ size_t metadata_len, data_len;
+ struct thin_disk_superblock *disk_super;
+ struct dm_block *sblock;
+
+ /*
+ * We need to know if the thin_disk_superblock exceeds a 512-byte sector.
+ */
+ BUILD_BUG_ON(sizeof(struct thin_disk_superblock) > 512);
+
+ r = __write_changed_details(pmd);
+ if (r < 0)
+ goto out;
+
+ if (!pmd->need_commit)
+ goto out;
+
+ r = dm_sm_commit(pmd->data_sm);
+ if (r < 0)
+ goto out;
+
+ r = dm_tm_pre_commit(pmd->tm);
+ if (r < 0)
+ goto out;
+
+ r = dm_sm_root_size(pmd->metadata_sm, &metadata_len);
+ if (r < 0)
+ goto out;
+
+ r = dm_sm_root_size(pmd->metadata_sm, &data_len);
+ if (r < 0)
+ goto out;
+
+ r = dm_bm_write_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ goto out;
+
+ disk_super = dm_block_data(sblock);
+ disk_super->time = cpu_to_le32(pmd->time);
+ disk_super->data_mapping_root = cpu_to_le64(pmd->root);
+ disk_super->device_details_root = cpu_to_le64(pmd->details_root);
+ disk_super->trans_id = cpu_to_le64(pmd->trans_id);
+ disk_super->flags = cpu_to_le32(pmd->flags);
+
+ r = dm_sm_copy_root(pmd->metadata_sm, &disk_super->metadata_space_map_root,
+ metadata_len);
+ if (r < 0)
+ goto out_locked;
+
+ r = dm_sm_copy_root(pmd->data_sm, &disk_super->data_space_map_root,
+ data_len);
+ if (r < 0)
+ goto out_locked;
+
+ r = dm_tm_commit(pmd->tm, sblock);
+ if (!r)
+ pmd->need_commit = 0;
+
+out:
+ return r;
+
+out_locked:
+ dm_bm_unlock(sblock);
+ return r;
+}
+
+struct dm_pool_metadata *dm_pool_metadata_open(struct block_device *bdev,
+ sector_t data_block_size)
+{
+ int r;
+ struct thin_disk_superblock *disk_super;
+ struct dm_pool_metadata *pmd;
+ sector_t bdev_size = i_size_read(bdev->bd_inode) >> SECTOR_SHIFT;
+ struct dm_block_manager *bm;
+ int create;
+ struct dm_block *sblock;
+
+ pmd = kmalloc(sizeof(*pmd), GFP_KERNEL);
+ if (!pmd) {
+ DMERR("could not allocate metadata struct");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /*
+ * Max hex locks:
+ * 3 for btree insert +
+ * 2 for btree lookup used within space map
+ */
+ bm = dm_block_manager_create(bdev, THIN_METADATA_BLOCK_SIZE,
+ THIN_METADATA_CACHE_SIZE, 5);
+ if (!bm) {
+ DMERR("could not create block manager");
+ kfree(pmd);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ r = superblock_all_zeroes(bm, &create);
+ if (r) {
+ dm_block_manager_destroy(bm);
+ kfree(pmd);
+ return ERR_PTR(r);
+ }
+
+
+ r = init_pmd(pmd, bm, 0, create);
+ if (r) {
+ dm_block_manager_destroy(bm);
+ kfree(pmd);
+ return ERR_PTR(r);
+ }
+ pmd->bdev = bdev;
+
+ if (!create) {
+ r = __begin_transaction(pmd);
+ if (r < 0)
+ goto bad;
+ return pmd;
+ }
+
+ /*
+ * Create.
+ */
+ r = dm_bm_write_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ goto bad;
+
+ disk_super = dm_block_data(sblock);
+ disk_super->magic = cpu_to_le64(THIN_SUPERBLOCK_MAGIC);
+ disk_super->version = cpu_to_le32(THIN_VERSION);
+ disk_super->time = 0;
+ disk_super->metadata_block_size = cpu_to_le32(THIN_METADATA_BLOCK_SIZE >> SECTOR_SHIFT);
+ disk_super->metadata_nr_blocks = cpu_to_le64(bdev_size >> SECTOR_TO_BLOCK_SHIFT);
+ disk_super->data_block_size = cpu_to_le32(data_block_size);
+
+ r = dm_bm_unlock(sblock);
+ if (r < 0)
+ goto bad;
+
+ r = dm_btree_empty(&pmd->info, &pmd->root);
+ if (r < 0)
+ goto bad;
+
+ r = dm_btree_empty(&pmd->details_info, &pmd->details_root);
+ if (r < 0) {
+ DMERR("couldn't create devices root");
+ goto bad;
+ }
+
+ pmd->flags = 0;
+ pmd->need_commit = 1;
+ r = dm_pool_commit_metadata(pmd);
+ if (r < 0) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ goto bad;
+ }
+
+ return pmd;
+
+bad:
+ if (dm_pool_metadata_close(pmd) < 0)
+ DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
+ return ERR_PTR(r);
+}
+
+int dm_pool_metadata_close(struct dm_pool_metadata *pmd)
+{
+ int r;
+ unsigned open_devices = 0;
+ struct dm_thin_device *td, *tmp;
+
+ down_read(&pmd->root_lock);
+ list_for_each_entry_safe(td, tmp, &pmd->thin_devices, list) {
+ if (td->open_count)
+ open_devices++;
+ else {
+ list_del(&td->list);
+ kfree(td);
+ }
+ }
+ up_read(&pmd->root_lock);
+
+ if (open_devices) {
+ DMERR("attempt to close pmd when %u device(s) are still open",
+ open_devices);
+ return -EBUSY;
+ }
+
+ r = __commit_transaction(pmd);
+ if (r < 0)
+ DMWARN("%s: __commit_transaction() failed, error = %d",
+ __func__, r);
+
+ dm_tm_destroy(pmd->tm);
+ dm_tm_destroy(pmd->nb_tm);
+ dm_block_manager_destroy(pmd->bm);
+ dm_sm_destroy(pmd->metadata_sm);
+ dm_sm_destroy(pmd->data_sm);
+ kfree(pmd);
+
+ return 0;
+}
+
+static int __open_device(struct dm_pool_metadata *pmd,
+ dm_thin_id dev, int create,
+ struct dm_thin_device **td)
+{
+ int r, changed = 0;
+ struct dm_thin_device *td2;
+ uint64_t key = dev;
+ struct disk_device_details details_le;
+
+ /*
+ * Check the device isn't already open.
+ */
+ list_for_each_entry(td2, &pmd->thin_devices, list)
+ if (td2->id == dev) {
+ td2->open_count++;
+ *td = td2;
+ return 0;
+ }
+
+ /*
+ * Check the device exists.
+ */
+ r = dm_btree_lookup(&pmd->details_info, pmd->details_root,
+ &key, &details_le);
+ if (r) {
+ if (r != -ENODATA || !create)
+ return r;
+
+ changed = 1;
+ details_le.mapped_blocks = 0;
+ details_le.transaction_id = cpu_to_le64(pmd->trans_id);
+ details_le.creation_time = cpu_to_le32(pmd->time);
+ details_le.snapshotted_time = cpu_to_le32(pmd->time);
+ }
+
+ *td = kmalloc(sizeof(**td), GFP_NOIO);
+ if (!*td)
+ return -ENOMEM;
+
+ (*td)->pmd = pmd;
+ (*td)->id = dev;
+ (*td)->open_count = 1;
+ (*td)->changed = changed;
+ (*td)->mapped_blocks = le64_to_cpu(details_le.mapped_blocks);
+ (*td)->transaction_id = le64_to_cpu(details_le.transaction_id);
+ (*td)->creation_time = le32_to_cpu(details_le.creation_time);
+ (*td)->snapshotted_time = le32_to_cpu(details_le.snapshotted_time);
+
+ list_add(&(*td)->list, &pmd->thin_devices);
+
+ return 0;
+}
+
+static void __close_device(struct dm_thin_device *td)
+{
+ --td->open_count;
+}
+
+static int __create_thin(struct dm_pool_metadata *pmd,
+ dm_thin_id dev)
+{
+ int r;
+ dm_block_t dev_root;
+ uint64_t key = dev;
+ struct disk_device_details details_le;
+ struct dm_thin_device *td;
+ __le64 value;
+
+ r = dm_btree_lookup(&pmd->details_info, pmd->details_root,
+ &key, &details_le);
+ if (!r)
+ return -EEXIST;
+
+ /*
+ * Create an empty btree for the mappings.
+ */
+ r = dm_btree_empty(&pmd->bl_info, &dev_root);
+ if (r)
+ return r;
+
+ /*
+ * Insert it into the main mapping tree.
+ */
+ value = cpu_to_le64(dev_root);
+ __dm_bless_for_disk(&value);
+ r = dm_btree_insert(&pmd->tl_info, pmd->root, &key, &value, &pmd->root);
+ if (r) {
+ dm_btree_del(&pmd->bl_info, dev_root);
+ return r;
+ }
+
+ r = __open_device(pmd, dev, 1, &td);
+ if (r) {
+ __close_device(td);
+ dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
+ dm_btree_del(&pmd->bl_info, dev_root);
+ return r;
+ }
+ td->changed = 1;
+ __close_device(td);
+
+ return r;
+}
+
+int dm_pool_create_thin(struct dm_pool_metadata *pmd, dm_thin_id dev)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __create_thin(pmd, dev);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+static int __set_snapshot_details(struct dm_pool_metadata *pmd,
+ struct dm_thin_device *snap,
+ dm_thin_id origin, uint32_t time)
+{
+ int r;
+ struct dm_thin_device *td;
+
+ r = __open_device(pmd, origin, 0, &td);
+ if (r)
+ return r;
+
+ td->changed = 1;
+ td->snapshotted_time = time;
+
+ snap->mapped_blocks = td->mapped_blocks;
+ snap->snapshotted_time = time;
+ __close_device(td);
+
+ return 0;
+}
+
+static int __create_snap(struct dm_pool_metadata *pmd,
+ dm_thin_id dev, dm_thin_id origin)
+{
+ int r;
+ dm_block_t origin_root;
+ uint64_t key = origin, dev_key = dev;
+ struct dm_thin_device *td;
+ struct disk_device_details details_le;
+ __le64 value;
+
+ /* check this device is unused */
+ r = dm_btree_lookup(&pmd->details_info, pmd->details_root,
+ &dev_key, &details_le);
+ if (!r)
+ return -EEXIST;
+
+ /* find the mapping tree for the origin */
+ r = dm_btree_lookup(&pmd->tl_info, pmd->root, &key, &value);
+ if (r)
+ return r;
+ origin_root = le64_to_cpu(value);
+
+ /* clone the origin, an inc will do */
+ dm_tm_inc(pmd->tm, origin_root);
+
+ /* insert into the main mapping tree */
+ value = cpu_to_le64(origin_root);
+ __dm_bless_for_disk(&value);
+ key = dev;
+ r = dm_btree_insert(&pmd->tl_info, pmd->root, &key, &value, &pmd->root);
+ if (r) {
+ dm_tm_dec(pmd->tm, origin_root);
+ return r;
+ }
+
+ pmd->time++;
+
+ r = __open_device(pmd, dev, 1, &td);
+ if (r)
+ goto bad;
+
+ r = __set_snapshot_details(pmd, td, origin, pmd->time);
+ if (r)
+ goto bad;
+
+ __close_device(td);
+ return 0;
+
+bad:
+ __close_device(td);
+ dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
+ dm_btree_remove(&pmd->details_info, pmd->details_root,
+ &key, &pmd->details_root);
+ return r;
+}
+
+int dm_pool_create_snap(struct dm_pool_metadata *pmd,
+ dm_thin_id dev,
+ dm_thin_id origin)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __create_snap(pmd, dev, origin);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+static int __delete_device(struct dm_pool_metadata *pmd, dm_thin_id dev)
+{
+ int r;
+ uint64_t key = dev;
+ struct dm_thin_device *td;
+
+ /* TODO: failure should mark the transaction invalid */
+ r = __open_device(pmd, dev, 0, &td);
+ if (r)
+ return r;
+
+ if (td->open_count > 1) {
+ __close_device(td);
+ return -EBUSY;
+ }
+
+ list_del(&td->list);
+ kfree(td);
+ r = dm_btree_remove(&pmd->details_info, pmd->details_root,
+ &key, &pmd->details_root);
+ if (r)
+ return r;
+
+ r = dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
+ if (r)
+ return r;
+
+ pmd->need_commit = 1;
+
+ return 0;
+}
+
+int dm_pool_delete_thin_device(struct dm_pool_metadata *pmd,
+ dm_thin_id dev)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __delete_device(pmd, dev);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_set_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t current_id,
+ uint64_t new_id)
+{
+ down_write(&pmd->root_lock);
+ if (pmd->trans_id != current_id) {
+ up_write(&pmd->root_lock);
+ DMERR("mismatched transaction id");
+ return -EINVAL;
+ }
+
+ pmd->trans_id = new_id;
+ pmd->need_commit = 1;
+ up_write(&pmd->root_lock);
+
+ return 0;
+}
+
+int dm_pool_get_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t *result)
+{
+ down_read(&pmd->root_lock);
+ *result = pmd->trans_id;
+ up_read(&pmd->root_lock);
+
+ return 0;
+}
+
+static int __get_held_metadata_root(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+ struct thin_disk_superblock *disk_super;
+ struct dm_block *sblock;
+
+ r = dm_bm_write_lock(pmd->bm, THIN_SUPERBLOCK_LOCATION,
+ &sb_validator, &sblock);
+ if (r)
+ return r;
+
+ disk_super = dm_block_data(sblock);
+ *result = le64_to_cpu(disk_super->held_root);
+
+ return dm_bm_unlock(sblock);
+}
+
+int dm_pool_get_held_metadata_root(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = __get_held_metadata_root(pmd, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_open_thin_device(struct dm_pool_metadata *pmd, dm_thin_id dev,
+ struct dm_thin_device **td)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __open_device(pmd, dev, 0, td);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_close_thin_device(struct dm_thin_device *td)
+{
+ down_write(&td->pmd->root_lock);
+ __close_device(td);
+ up_write(&td->pmd->root_lock);
+
+ return 0;
+}
+
+dm_thin_id dm_thin_dev_id(struct dm_thin_device *td)
+{
+ return td->id;
+}
+
+static int __snapshotted_since(struct dm_thin_device *td, uint32_t time)
+{
+ return td->snapshotted_time > time;
+}
+
+int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
+ int can_block, struct dm_thin_lookup_result *result)
+{
+ int r;
+ uint64_t block_time = 0;
+ __le64 value;
+ struct dm_pool_metadata *pmd = td->pmd;
+ dm_block_t keys[2] = { td->id, block };
+
+ if (can_block) {
+ down_read(&pmd->root_lock);
+ r = dm_btree_lookup(&pmd->info, pmd->root, keys, &value);
+ if (!r)
+ block_time = le64_to_cpu(value);
+ up_read(&pmd->root_lock);
+
+ } else if (down_read_trylock(&pmd->root_lock)) {
+ r = dm_btree_lookup(&pmd->nb_info, pmd->root, keys, &value);
+ if (!r)
+ block_time = le64_to_cpu(value);
+ up_read(&pmd->root_lock);
+
+ } else
+ return -EWOULDBLOCK;
+
+ if (!r) {
+ dm_block_t exception_block;
+ uint32_t exception_time;
+ unpack_block_time(block_time, &exception_block,
+ &exception_time);
+ result->block = exception_block;
+ result->shared = __snapshotted_since(td, exception_time);
+ }
+
+ return r;
+}
+
+static int __insert(struct dm_thin_device *td, dm_block_t block,
+ dm_block_t data_block)
+{
+ int r, inserted;
+ __le64 value;
+ struct dm_pool_metadata *pmd = td->pmd;
+ dm_block_t keys[2] = { td->id, block };
+
+ pmd->need_commit = 1;
+ value = cpu_to_le64(pack_block_time(data_block, pmd->time));
+ __dm_bless_for_disk(&value);
+
+ r = dm_btree_insert_notify(&pmd->info, pmd->root, keys, &value,
+ &pmd->root, &inserted);
+ if (r)
+ return r;
+
+ if (inserted) {
+ td->mapped_blocks++;
+ td->changed = 1;
+ }
+
+ return 0;
+}
+
+int dm_thin_insert_block(struct dm_thin_device *td, dm_block_t block,
+ dm_block_t data_block)
+{
+ int r;
+
+ down_write(&td->pmd->root_lock);
+ r = __insert(td, block, data_block);
+ up_write(&td->pmd->root_lock);
+
+ return r;
+}
+
+static int __remove(struct dm_thin_device *td, dm_block_t block)
+{
+ int r;
+ struct dm_pool_metadata *pmd = td->pmd;
+ dm_block_t keys[2] = { td->id, block };
+
+ r = dm_btree_remove(&pmd->info, pmd->root, keys, &pmd->root);
+ if (r)
+ return r;
+
+ pmd->need_commit = 1;
+
+ return 0;
+}
+
+int dm_thin_remove_block(struct dm_thin_device *td, dm_block_t block)
+{
+ int r;
+
+ down_write(&td->pmd->root_lock);
+ r = __remove(td, block);
+ up_write(&td->pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_alloc_data_block(struct dm_pool_metadata *pmd, dm_block_t *result)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+
+ r = dm_sm_new_block(pmd->data_sm, result);
+ pmd->need_commit = 1;
+
+ up_write(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_commit_metadata(struct dm_pool_metadata *pmd)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+
+ r = __commit_transaction(pmd);
+ if (r <= 0)
+ goto out;
+
+ /*
+ * Open the next transaction.
+ */
+ r = __begin_transaction(pmd);
+out:
+ up_write(&pmd->root_lock);
+ return r;
+}
+
+int dm_pool_get_free_block_count(struct dm_pool_metadata *pmd, dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_free(pmd->data_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_get_free_metadata_block_count(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_free(pmd->metadata_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_get_metadata_dev_size(struct dm_pool_metadata *pmd,
+ dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_blocks(pmd->metadata_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_pool_get_data_block_size(struct dm_pool_metadata *pmd, sector_t *result)
+{
+ down_read(&pmd->root_lock);
+ *result = pmd->data_block_size;
+ up_read(&pmd->root_lock);
+
+ return 0;
+}
+
+int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result)
+{
+ int r;
+
+ down_read(&pmd->root_lock);
+ r = dm_sm_get_nr_blocks(pmd->data_sm, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+int dm_thin_get_mapped_count(struct dm_thin_device *td, dm_block_t *result)
+{
+ struct dm_pool_metadata *pmd = td->pmd;
+
+ down_read(&pmd->root_lock);
+ *result = td->mapped_blocks;
+ up_read(&pmd->root_lock);
+
+ return 0;
+}
+
+static int __highest_block(struct dm_thin_device *td, dm_block_t *result)
+{
+ int r;
+ __le64 value_le;
+ dm_block_t thin_root;
+ struct dm_pool_metadata *pmd = td->pmd;
+
+ r = dm_btree_lookup(&pmd->tl_info, pmd->root, &td->id, &value_le);
+ if (r)
+ return r;
+
+ thin_root = le64_to_cpu(value_le);
+
+ return dm_btree_find_highest_key(&pmd->bl_info, thin_root, result);
+}
+
+int dm_thin_get_highest_mapped_block(struct dm_thin_device *td,
+ dm_block_t *result)
+{
+ int r;
+ struct dm_pool_metadata *pmd = td->pmd;
+
+ down_read(&pmd->root_lock);
+ r = __highest_block(td, result);
+ up_read(&pmd->root_lock);
+
+ return r;
+}
+
+static int __resize_data_dev(struct dm_pool_metadata *pmd, dm_block_t new_count)
+{
+ int r;
+ dm_block_t old_count;
+
+ r = dm_sm_get_nr_blocks(pmd->data_sm, &old_count);
+ if (r)
+ return r;
+
+ if (new_count == old_count)
+ return 0;
+
+ if (new_count < old_count) {
+ DMERR("cannot reduce size of data device");
+ return -EINVAL;
+ }
+
+ r = dm_sm_extend(pmd->data_sm, new_count - old_count);
+ if (!r)
+ pmd->need_commit = 1;
+
+ return r;
+}
+
+int dm_pool_resize_data_dev(struct dm_pool_metadata *pmd, dm_block_t new_count)
+{
+ int r;
+
+ down_write(&pmd->root_lock);
+ r = __resize_data_dev(pmd, new_count);
+ up_write(&pmd->root_lock);
+
+ return r;
+}
diff --git a/drivers/md/dm-thin-metadata.h b/drivers/md/dm-thin-metadata.h
new file mode 100644
index 0000000..859c168
--- /dev/null
+++ b/drivers/md/dm-thin-metadata.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2010-2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_THIN_METADATA_H
+#define DM_THIN_METADATA_H
+
+#include "persistent-data/dm-block-manager.h"
+
+#define THIN_METADATA_BLOCK_SIZE 4096
+
+/*----------------------------------------------------------------*/
+
+struct dm_pool_metadata;
+struct dm_thin_device;
+
+/*
+ * Device identifier
+ */
+typedef uint64_t dm_thin_id;
+
+/*
+ * Reopens or creates a new, empty metadata volume.
+ */
+struct dm_pool_metadata *dm_pool_metadata_open(struct block_device *bdev,
+ sector_t data_block_size);
+
+int dm_pool_metadata_close(struct dm_pool_metadata *pmd);
+
+/*
+ * Compat feature flags. Any incompat flags beyond the ones
+ * specified below will prevent use of the thin metadata.
+ */
+#define THIN_FEATURE_COMPAT_SUPP 0UL
+#define THIN_FEATURE_COMPAT_RO_SUPP 0UL
+#define THIN_FEATURE_INCOMPAT_SUPP 0UL
+
+/*
+ * Device creation/deletion.
+ */
+int dm_pool_create_thin(struct dm_pool_metadata *pmd, dm_thin_id dev);
+
+/*
+ * An internal snapshot.
+ *
+ * You can only snapshot a quiesced origin i.e. one that is either
+ * suspended or not instanced at all.
+ */
+int dm_pool_create_snap(struct dm_pool_metadata *pmd, dm_thin_id dev,
+ dm_thin_id origin);
+
+/*
+ * Deletes a virtual device from the metadata. It _is_ safe to call this
+ * when that device is open. Operations on that device will just start
+ * failing. You still need to call close() on the device.
+ */
+int dm_pool_delete_thin_device(struct dm_pool_metadata *pmd,
+ dm_thin_id dev);
+
+/*
+ * Commits _all_ metadata changes: device creation, deletion, mapping
+ * updates.
+ */
+int dm_pool_commit_metadata(struct dm_pool_metadata *pmd);
+
+/*
+ * Set/get userspace transaction id.
+ */
+int dm_pool_set_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t current_id,
+ uint64_t new_id);
+
+int dm_pool_get_metadata_transaction_id(struct dm_pool_metadata *pmd,
+ uint64_t *result);
+
+/*
+ * Hold/get root for userspace transaction.
+ */
+int dm_pool_hold_metadata_root(struct dm_pool_metadata *pmd);
+
+int dm_pool_get_held_metadata_root(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+/*
+ * Actions on a single virtual device.
+ */
+
+/*
+ * Opening the same device more than once will fail with -EBUSY.
+ */
+int dm_pool_open_thin_device(struct dm_pool_metadata *pmd, dm_thin_id dev,
+ struct dm_thin_device **td);
+
+int dm_pool_close_thin_device(struct dm_thin_device *td);
+
+dm_thin_id dm_thin_dev_id(struct dm_thin_device *td);
+
+struct dm_thin_lookup_result {
+ dm_block_t block;
+ int shared;
+};
+
+/*
+ * Returns:
+ * -EWOULDBLOCK iff @can_block is set and would block.
+ * -ENODATA iff that mapping is not present.
+ * 0 success
+ */
+int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
+ int can_block, struct dm_thin_lookup_result *result);
+
+/*
+ * Obtain an unused block.
+ */
+int dm_pool_alloc_data_block(struct dm_pool_metadata *pmd, dm_block_t *result);
+
+/*
+ * Insert or remove block.
+ */
+int dm_thin_insert_block(struct dm_thin_device *td, dm_block_t block,
+ dm_block_t data_block);
+
+int dm_thin_remove_block(struct dm_thin_device *td, dm_block_t block);
+
+/*
+ * Queries.
+ */
+int dm_thin_get_highest_mapped_block(struct dm_thin_device *td,
+ dm_block_t *highest_mapped);
+
+int dm_thin_get_mapped_count(struct dm_thin_device *td, dm_block_t *result);
+
+int dm_pool_get_free_block_count(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+int dm_pool_get_free_metadata_block_count(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+int dm_pool_get_metadata_dev_size(struct dm_pool_metadata *pmd,
+ dm_block_t *result);
+
+int dm_pool_get_data_block_size(struct dm_pool_metadata *pmd, sector_t *result);
+
+int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result);
+
+/*
+ * Returns -ENOSPC if the new size is too small and already allocated
+ * blocks would be lost.
+ */
+int dm_pool_resize_data_dev(struct dm_pool_metadata *pmd, dm_block_t new_size);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c
new file mode 100644
index 0000000..c308757
--- /dev/null
+++ b/drivers/md/dm-thin.c
@@ -0,0 +1,2428 @@
+/*
+ * Copyright (C) 2011 Red Hat UK.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-thin-metadata.h"
+
+#include <linux/device-mapper.h>
+#include <linux/dm-io.h>
+#include <linux/dm-kcopyd.h>
+#include <linux/list.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define DM_MSG_PREFIX "thin"
+
+/*
+ * Tunable constants
+ */
+#define ENDIO_HOOK_POOL_SIZE 10240
+#define DEFERRED_SET_SIZE 64
+#define MAPPING_POOL_SIZE 1024
+#define PRISON_CELLS 1024
+
+/*
+ * The block size of the device holding pool data must be
+ * between 64KB and 1GB.
+ */
+#define DATA_DEV_BLOCK_SIZE_MIN_SECTORS (64 * 1024 >> SECTOR_SHIFT)
+#define DATA_DEV_BLOCK_SIZE_MAX_SECTORS (1024 * 1024 * 1024 >> SECTOR_SHIFT)
+
+/*
+ * The metadata device is currently limited in size. The limitation is
+ * checked lower down in dm-space-map-metadata, but we also check it here
+ * so we can fail early.
+ *
+ * We have one block of index, which can hold 255 index entries. Each
+ * index entry contains allocation info about 16k metadata blocks.
+ */
+#define METADATA_DEV_MAX_SECTORS (255 * (1 << 14) * (THIN_METADATA_BLOCK_SIZE / (1 << SECTOR_SHIFT)))
+
+/*
+ * Device id is restricted to 24 bits.
+ */
+#define MAX_DEV_ID ((1 << 24) - 1)
+
+/*
+ * How do we handle breaking sharing of data blocks?
+ * =================================================
+ *
+ * We use a standard copy-on-write btree to store the mappings for the
+ * devices (note I'm talking about copy-on-write of the metadata here, not
+ * the data). When you take an internal snapshot you clone the root node
+ * of the origin btree. After this there is no concept of an origin or a
+ * snapshot. They are just two device trees that happen to point to the
+ * same data blocks.
+ *
+ * When we get a write in we decide if it's to a shared data block using
+ * some timestamp magic. If it is, we have to break sharing.
+ *
+ * Let's say we write to a shared block in what was the origin. The
+ * steps are:
+ *
+ * i) plug io further to this physical block. (see bio_prison code).
+ *
+ * ii) quiesce any read io to that shared data block. Obviously
+ * including all devices that share this block. (see deferred_set code)
+ *
+ * iii) copy the data block to a newly allocate block. This step can be
+ * missed out if the io covers the block. (schedule_copy).
+ *
+ * iv) insert the new mapping into the origin's btree
+ * (process_prepared_mappings). This act of inserting breaks some
+ * sharing of btree nodes between the two devices. Breaking sharing only
+ * effects the btree of that specific device. Btrees for the other
+ * devices that share the block never change. The btree for the origin
+ * device as it was after the last commit is untouched, ie. we're using
+ * persistent data structures in the functional programming sense.
+ *
+ * v) unplug io to this physical block, including the io that triggered
+ * the breaking of sharing.
+ *
+ * Steps (ii) and (iii) occur in parallel.
+ *
+ * The metadata _doesn't_ need to be committed before the io continues. We
+ * get away with this because the io is always written to a _new_ block.
+ * If there's a crash, then:
+ *
+ * - The origin mapping will point to the old origin block (the shared
+ * one). This will contain the data as it was before the io that triggered
+ * the breaking of sharing came in.
+ *
+ * - The snap mapping still points to the old block. As it would after
+ * the commit.
+ *
+ * The downside of this scheme is the timestamp magic isn't perfect, and
+ * will continue to think that data block in the snapshot device is shared
+ * even after the write to the origin has broken sharing. I suspect data
+ * blocks will typically be shared by many different devices, so we're
+ * breaking sharing n + 1 times, rather than n, where n is the number of
+ * devices that reference this data block. At the moment I think the
+ * benefits far, far outweigh the disadvantages.
+ */
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Sometimes we can't deal with a bio straight away. We put them in prison
+ * where they can't cause any mischief. Bios are put in a cell identified
+ * by a key, multiple bios can be in the same cell. When the cell is
+ * subsequently unlocked the bios become available.
+ */
+struct bio_prison;
+
+struct cell_key {
+ int virtual;
+ dm_thin_id dev;
+ dm_block_t block;
+};
+
+struct cell {
+ struct hlist_node list;
+ struct bio_prison *prison;
+ struct cell_key key;
+ unsigned count;
+ struct bio_list bios;
+};
+
+struct bio_prison {
+ spinlock_t lock;
+ mempool_t *cell_pool;
+
+ unsigned nr_buckets;
+ unsigned hash_mask;
+ struct hlist_head *cells;
+};
+
+static uint32_t calc_nr_buckets(unsigned nr_cells)
+{
+ uint32_t n = 128;
+
+ nr_cells /= 4;
+ nr_cells = min(nr_cells, 8192u);
+
+ while (n < nr_cells)
+ n <<= 1;
+
+ return n;
+}
+
+/*
+ * @nr_cells should be the number of cells you want in use _concurrently_.
+ * Don't confuse it with the number of distinct keys.
+ */
+static struct bio_prison *prison_create(unsigned nr_cells)
+{
+ unsigned i;
+ uint32_t nr_buckets = calc_nr_buckets(nr_cells);
+ size_t len = sizeof(struct bio_prison) +
+ (sizeof(struct hlist_head) * nr_buckets);
+ struct bio_prison *prison = kmalloc(len, GFP_KERNEL);
+
+ if (!prison)
+ return NULL;
+
+ spin_lock_init(&prison->lock);
+ prison->cell_pool = mempool_create_kmalloc_pool(nr_cells,
+ sizeof(struct cell));
+ if (!prison->cell_pool) {
+ kfree(prison);
+ return NULL;
+ }
+
+ prison->nr_buckets = nr_buckets;
+ prison->hash_mask = nr_buckets - 1;
+ prison->cells = (struct hlist_head *) (prison + 1);
+ for (i = 0; i < nr_buckets; i++)
+ INIT_HLIST_HEAD(prison->cells + i);
+
+ return prison;
+}
+
+static void prison_destroy(struct bio_prison *prison)
+{
+ mempool_destroy(prison->cell_pool);
+ kfree(prison);
+}
+
+static uint32_t hash_key(struct bio_prison *prison, struct cell_key *key)
+{
+ const unsigned long BIG_PRIME = 4294967291UL;
+ uint64_t hash = key->block * BIG_PRIME;
+
+ return (uint32_t) (hash & prison->hash_mask);
+}
+
+static int keys_equal(struct cell_key *lhs, struct cell_key *rhs)
+{
+ return (lhs->virtual == rhs->virtual) &&
+ (lhs->dev == rhs->dev) &&
+ (lhs->block == rhs->block);
+}
+
+static struct cell *__search_bucket(struct hlist_head *bucket,
+ struct cell_key *key)
+{
+ struct cell *cell;
+ struct hlist_node *tmp;
+
+ hlist_for_each_entry(cell, tmp, bucket, list)
+ if (keys_equal(&cell->key, key))
+ return cell;
+
+ return NULL;
+}
+
+/*
+ * This may block if a new cell needs allocating. You must ensure that
+ * cells will be unlocked even if the calling thread is blocked.
+ *
+ * Returns the number of entries in the cell prior to the new addition
+ * or < 0 on failure.
+ */
+static int bio_detain(struct bio_prison *prison, struct cell_key *key,
+ struct bio *inmate, struct cell **ref)
+{
+ int r;
+ unsigned long flags;
+ uint32_t hash = hash_key(prison, key);
+ struct cell *uninitialized_var(cell), *cell2 = NULL;
+
+ BUG_ON(hash > prison->nr_buckets);
+
+ spin_lock_irqsave(&prison->lock, flags);
+ cell = __search_bucket(prison->cells + hash, key);
+
+ if (!cell) {
+ /*
+ * Allocate a new cell
+ */
+ spin_unlock_irqrestore(&prison->lock, flags);
+ cell2 = mempool_alloc(prison->cell_pool, GFP_NOIO);
+ spin_lock_irqsave(&prison->lock, flags);
+
+ /*
+ * We've been unlocked, so we have to double check that
+ * nobody else has inserted this cell in the meantime.
+ */
+ cell = __search_bucket(prison->cells + hash, key);
+
+ if (!cell) {
+ cell = cell2;
+ cell2 = NULL;
+
+ cell->prison = prison;
+ memcpy(&cell->key, key, sizeof(cell->key));
+ cell->count = 0;
+ bio_list_init(&cell->bios);
+ hlist_add_head(&cell->list, prison->cells + hash);
+ }
+ }
+
+ r = cell->count++;
+ bio_list_add(&cell->bios, inmate);
+ spin_unlock_irqrestore(&prison->lock, flags);
+
+ if (cell2)
+ mempool_free(cell2, prison->cell_pool);
+
+ *ref = cell;
+
+ return r;
+}
+
+/*
+ * @inmates must have been initialised prior to this call
+ */
+static void __cell_release(struct cell *cell, struct bio_list *inmates)
+{
+ struct bio_prison *prison = cell->prison;
+
+ hlist_del(&cell->list);
+
+ if (inmates)
+ bio_list_merge(inmates, &cell->bios);
+
+ mempool_free(cell, prison->cell_pool);
+}
+
+static void cell_release(struct cell *cell, struct bio_list *bios)
+{
+ unsigned long flags;
+ struct bio_prison *prison = cell->prison;
+
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(cell, bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
+}
+
+/*
+ * There are a couple of places where we put a bio into a cell briefly
+ * before taking it out again. In these situations we know that no other
+ * bio may be in the cell. This function releases the cell, and also does
+ * a sanity check.
+ */
+static void cell_release_singleton(struct cell *cell, struct bio *bio)
+{
+ struct bio_prison *prison = cell->prison;
+ struct bio_list bios;
+ struct bio *b;
+ unsigned long flags;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(cell, &bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
+
+ b = bio_list_pop(&bios);
+ BUG_ON(b != bio);
+ BUG_ON(!bio_list_empty(&bios));
+}
+
+static void cell_error(struct cell *cell)
+{
+ struct bio_prison *prison = cell->prison;
+ struct bio_list bios;
+ struct bio *bio;
+ unsigned long flags;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(cell, &bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
+
+ while ((bio = bio_list_pop(&bios)))
+ bio_io_error(bio);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * We use the deferred set to keep track of pending reads to shared blocks.
+ * We do this to ensure the new mapping caused by a write isn't performed
+ * until these prior reads have completed. Otherwise the insertion of the
+ * new mapping could free the old block that the read bios are mapped to.
+ */
+
+struct deferred_set;
+struct deferred_entry {
+ struct deferred_set *ds;
+ unsigned count;
+ struct list_head work_items;
+};
+
+struct deferred_set {
+ spinlock_t lock;
+ unsigned current_entry;
+ unsigned sweeper;
+ struct deferred_entry entries[DEFERRED_SET_SIZE];
+};
+
+static void ds_init(struct deferred_set *ds)
+{
+ int i;
+
+ spin_lock_init(&ds->lock);
+ ds->current_entry = 0;
+ ds->sweeper = 0;
+ for (i = 0; i < DEFERRED_SET_SIZE; i++) {
+ ds->entries[i].ds = ds;
+ ds->entries[i].count = 0;
+ INIT_LIST_HEAD(&ds->entries[i].work_items);
+ }
+}
+
+static struct deferred_entry *ds_inc(struct deferred_set *ds)
+{
+ unsigned long flags;
+ struct deferred_entry *entry;
+
+ spin_lock_irqsave(&ds->lock, flags);
+ entry = ds->entries + ds->current_entry;
+ entry->count++;
+ spin_unlock_irqrestore(&ds->lock, flags);
+
+ return entry;
+}
+
+static unsigned ds_next(unsigned index)
+{
+ return (index + 1) % DEFERRED_SET_SIZE;
+}
+
+static void __sweep(struct deferred_set *ds, struct list_head *head)
+{
+ while ((ds->sweeper != ds->current_entry) &&
+ !ds->entries[ds->sweeper].count) {
+ list_splice_init(&ds->entries[ds->sweeper].work_items, head);
+ ds->sweeper = ds_next(ds->sweeper);
+ }
+
+ if ((ds->sweeper == ds->current_entry) && !ds->entries[ds->sweeper].count)
+ list_splice_init(&ds->entries[ds->sweeper].work_items, head);
+}
+
+static void ds_dec(struct deferred_entry *entry, struct list_head *head)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&entry->ds->lock, flags);
+ BUG_ON(!entry->count);
+ --entry->count;
+ __sweep(entry->ds, head);
+ spin_unlock_irqrestore(&entry->ds->lock, flags);
+}
+
+/*
+ * Returns 1 if deferred or 0 if no pending items to delay job.
+ */
+static int ds_add_work(struct deferred_set *ds, struct list_head *work)
+{
+ int r = 1;
+ unsigned long flags;
+ unsigned next_entry;
+
+ spin_lock_irqsave(&ds->lock, flags);
+ if ((ds->sweeper == ds->current_entry) &&
+ !ds->entries[ds->current_entry].count)
+ r = 0;
+ else {
+ list_add(work, &ds->entries[ds->current_entry].work_items);
+ next_entry = ds_next(ds->current_entry);
+ if (!ds->entries[next_entry].count)
+ ds->current_entry = next_entry;
+ }
+ spin_unlock_irqrestore(&ds->lock, flags);
+
+ return r;
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Key building.
+ */
+static void build_data_key(struct dm_thin_device *td,
+ dm_block_t b, struct cell_key *key)
+{
+ key->virtual = 0;
+ key->dev = dm_thin_dev_id(td);
+ key->block = b;
+}
+
+static void build_virtual_key(struct dm_thin_device *td, dm_block_t b,
+ struct cell_key *key)
+{
+ key->virtual = 1;
+ key->dev = dm_thin_dev_id(td);
+ key->block = b;
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * A pool device ties together a metadata device and a data device. It
+ * also provides the interface for creating and destroying internal
+ * devices.
+ */
+struct new_mapping;
+struct pool {
+ struct list_head list;
+ struct dm_target *ti; /* Only set if a pool target is bound */
+
+ struct mapped_device *pool_md;
+ struct block_device *md_dev;
+ struct dm_pool_metadata *pmd;
+
+ uint32_t sectors_per_block;
+ unsigned block_shift;
+ dm_block_t offset_mask;
+ dm_block_t low_water_blocks;
+
+ unsigned zero_new_blocks:1;
+ unsigned low_water_triggered:1; /* A dm event has been sent */
+ unsigned no_free_space:1; /* A -ENOSPC warning has been issued */
+
+ struct bio_prison *prison;
+ struct dm_kcopyd_client *copier;
+
+ struct workqueue_struct *wq;
+ struct work_struct worker;
+
+ unsigned ref_count;
+
+ spinlock_t lock;
+ struct bio_list deferred_bios;
+ struct bio_list deferred_flush_bios;
+ struct list_head prepared_mappings;
+
+ struct bio_list retry_on_resume_list;
+
+ struct deferred_set ds; /* FIXME: move to thin_c */
+
+ struct new_mapping *next_mapping;
+ mempool_t *mapping_pool;
+ mempool_t *endio_hook_pool;
+};
+
+/*
+ * Target context for a pool.
+ */
+struct pool_c {
+ struct dm_target *ti;
+ struct pool *pool;
+ struct dm_dev *data_dev;
+ struct dm_dev *metadata_dev;
+ struct dm_target_callbacks callbacks;
+
+ dm_block_t low_water_blocks;
+ unsigned zero_new_blocks:1;
+};
+
+/*
+ * Target context for a thin.
+ */
+struct thin_c {
+ struct dm_dev *pool_dev;
+ dm_thin_id dev_id;
+
+ struct pool *pool;
+ struct dm_thin_device *td;
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * A global list of pools that uses a struct mapped_device as a key.
+ */
+static struct dm_thin_pool_table {
+ struct mutex mutex;
+ struct list_head pools;
+} dm_thin_pool_table;
+
+static void pool_table_init(void)
+{
+ mutex_init(&dm_thin_pool_table.mutex);
+ INIT_LIST_HEAD(&dm_thin_pool_table.pools);
+}
+
+static void __pool_table_insert(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ list_add(&pool->list, &dm_thin_pool_table.pools);
+}
+
+static void __pool_table_remove(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ list_del(&pool->list);
+}
+
+static struct pool *__pool_table_lookup(struct mapped_device *md)
+{
+ struct pool *pool = NULL, *tmp;
+
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+
+ list_for_each_entry(tmp, &dm_thin_pool_table.pools, list) {
+ if (tmp->pool_md == md) {
+ pool = tmp;
+ break;
+ }
+ }
+
+ return pool;
+}
+
+static struct pool *__pool_table_lookup_metadata_dev(struct block_device *md_dev)
+{
+ struct pool *pool = NULL, *tmp;
+
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+
+ list_for_each_entry(tmp, &dm_thin_pool_table.pools, list) {
+ if (tmp->md_dev == md_dev) {
+ pool = tmp;
+ break;
+ }
+ }
+
+ return pool;
+}
+
+/*----------------------------------------------------------------*/
+
+static void __requeue_bio_list(struct thin_c *tc, struct bio_list *master)
+{
+ struct bio *bio;
+ struct bio_list bios;
+
+ bio_list_init(&bios);
+ bio_list_merge(&bios, master);
+ bio_list_init(master);
+
+ while ((bio = bio_list_pop(&bios))) {
+ if (dm_get_mapinfo(bio)->ptr == tc)
+ bio_endio(bio, DM_ENDIO_REQUEUE);
+ else
+ bio_list_add(master, bio);
+ }
+}
+
+static void requeue_io(struct thin_c *tc)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ __requeue_bio_list(tc, &pool->deferred_bios);
+ __requeue_bio_list(tc, &pool->retry_on_resume_list);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+/*
+ * This section of code contains the logic for processing a thin device's IO.
+ * Much of the code depends on pool object resources (lists, workqueues, etc)
+ * but most is exclusively called from the thin target rather than the thin-pool
+ * target.
+ */
+
+static dm_block_t get_bio_block(struct thin_c *tc, struct bio *bio)
+{
+ return bio->bi_sector >> tc->pool->block_shift;
+}
+
+static void remap(struct thin_c *tc, struct bio *bio, dm_block_t block)
+{
+ struct pool *pool = tc->pool;
+
+ bio->bi_bdev = tc->pool_dev->bdev;
+ bio->bi_sector = (block << pool->block_shift) +
+ (bio->bi_sector & pool->offset_mask);
+}
+
+static void remap_and_issue(struct thin_c *tc, struct bio *bio,
+ dm_block_t block)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ remap(tc, bio, block);
+
+ /*
+ * Batch together any FUA/FLUSH bios we find and then issue
+ * a single commit for them in process_deferred_bios().
+ */
+ if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_add(&pool->deferred_flush_bios, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+ } else
+ generic_make_request(bio);
+}
+
+/*
+ * wake_worker() is used when new work is queued and when pool_resume is
+ * ready to continue deferred IO processing.
+ */
+static void wake_worker(struct pool *pool)
+{
+ queue_work(pool->wq, &pool->worker);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Bio endio functions.
+ */
+struct endio_hook {
+ struct thin_c *tc;
+ bio_end_io_t *saved_bi_end_io;
+ struct deferred_entry *entry;
+};
+
+struct new_mapping {
+ struct list_head list;
+
+ int prepared;
+
+ struct thin_c *tc;
+ dm_block_t virt_block;
+ dm_block_t data_block;
+ struct cell *cell;
+ int err;
+
+ /*
+ * If the bio covers the whole area of a block then we can avoid
+ * zeroing or copying. Instead this bio is hooked. The bio will
+ * still be in the cell, so care has to be taken to avoid issuing
+ * the bio twice.
+ */
+ struct bio *bio;
+ bio_end_io_t *saved_bi_end_io;
+};
+
+static void __maybe_add_mapping(struct new_mapping *m)
+{
+ struct pool *pool = m->tc->pool;
+
+ if (list_empty(&m->list) && m->prepared) {
+ list_add(&m->list, &pool->prepared_mappings);
+ wake_worker(pool);
+ }
+}
+
+static void copy_complete(int read_err, unsigned long write_err, void *context)
+{
+ unsigned long flags;
+ struct new_mapping *m = context;
+ struct pool *pool = m->tc->pool;
+
+ m->err = read_err || write_err ? -EIO : 0;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ m->prepared = 1;
+ __maybe_add_mapping(m);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+static void overwrite_endio(struct bio *bio, int err)
+{
+ unsigned long flags;
+ struct new_mapping *m = dm_get_mapinfo(bio)->ptr;
+ struct pool *pool = m->tc->pool;
+
+ m->err = err;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ m->prepared = 1;
+ __maybe_add_mapping(m);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+static void shared_read_endio(struct bio *bio, int err)
+{
+ struct list_head mappings;
+ struct new_mapping *m, *tmp;
+ struct endio_hook *h = dm_get_mapinfo(bio)->ptr;
+ unsigned long flags;
+ struct pool *pool = h->tc->pool;
+
+ bio->bi_end_io = h->saved_bi_end_io;
+ bio_endio(bio, err);
+
+ INIT_LIST_HEAD(&mappings);
+ ds_dec(h->entry, &mappings);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ list_for_each_entry_safe(m, tmp, &mappings, list) {
+ list_del(&m->list);
+ INIT_LIST_HEAD(&m->list);
+ __maybe_add_mapping(m);
+ }
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ mempool_free(h, pool->endio_hook_pool);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Workqueue.
+ */
+
+/*
+ * Prepared mapping jobs.
+ */
+
+/*
+ * This sends the bios in the cell back to the deferred_bios list.
+ */
+static void cell_defer(struct thin_c *tc, struct cell *cell,
+ dm_block_t data_block)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ cell_release(cell, &pool->deferred_bios);
+ spin_unlock_irqrestore(&tc->pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+/*
+ * Same as cell_defer above, except it omits one particular detainee,
+ * a write bio that covers the block and has already been processed.
+ */
+static void cell_defer_except(struct thin_c *tc, struct cell *cell,
+ struct bio *exception)
+{
+ struct bio_list bios;
+ struct bio *bio;
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ bio_list_init(&bios);
+ cell_release(cell, &bios);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ while ((bio = bio_list_pop(&bios)))
+ if (bio != exception)
+ bio_list_add(&pool->deferred_bios, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+static void process_prepared_mapping(struct new_mapping *m)
+{
+ struct thin_c *tc = m->tc;
+ struct bio *bio;
+ int r;
+
+ bio = m->bio;
+ if (bio)
+ bio->bi_end_io = m->saved_bi_end_io;
+
+ if (m->err) {
+ cell_error(m->cell);
+ return;
+ }
+
+ /*
+ * Commit the prepared block into the mapping btree.
+ * Any I/O for this block arriving after this point will get
+ * remapped to it directly.
+ */
+ r = dm_thin_insert_block(tc->td, m->virt_block, m->data_block);
+ if (r) {
+ DMERR("dm_thin_insert_block() failed");
+ cell_error(m->cell);
+ return;
+ }
+
+ /*
+ * Release any bios held while the block was being provisioned.
+ * If we are processing a write bio that completely covers the block,
+ * we already processed it so can ignore it now when processing
+ * the bios in the cell.
+ */
+ if (bio) {
+ cell_defer_except(tc, m->cell, bio);
+ bio_endio(bio, 0);
+ } else
+ cell_defer(tc, m->cell, m->data_block);
+
+ list_del(&m->list);
+ mempool_free(m, tc->pool->mapping_pool);
+}
+
+static void process_prepared_mappings(struct pool *pool)
+{
+ unsigned long flags;
+ struct list_head maps;
+ struct new_mapping *m, *tmp;
+
+ INIT_LIST_HEAD(&maps);
+ spin_lock_irqsave(&pool->lock, flags);
+ list_splice_init(&pool->prepared_mappings, &maps);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ list_for_each_entry_safe(m, tmp, &maps, list)
+ process_prepared_mapping(m);
+}
+
+/*
+ * Deferred bio jobs.
+ */
+static int io_overwrites_block(struct pool *pool, struct bio *bio)
+{
+ return ((bio_data_dir(bio) == WRITE) &&
+ !(bio->bi_sector & pool->offset_mask)) &&
+ (bio->bi_size == (pool->sectors_per_block << SECTOR_SHIFT));
+}
+
+static void save_and_set_endio(struct bio *bio, bio_end_io_t **save,
+ bio_end_io_t *fn)
+{
+ *save = bio->bi_end_io;
+ bio->bi_end_io = fn;
+}
+
+static int ensure_next_mapping(struct pool *pool)
+{
+ if (pool->next_mapping)
+ return 0;
+
+ pool->next_mapping = mempool_alloc(pool->mapping_pool, GFP_ATOMIC);
+
+ return pool->next_mapping ? 0 : -ENOMEM;
+}
+
+static struct new_mapping *get_next_mapping(struct pool *pool)
+{
+ struct new_mapping *r = pool->next_mapping;
+
+ BUG_ON(!pool->next_mapping);
+
+ pool->next_mapping = NULL;
+
+ return r;
+}
+
+static void schedule_copy(struct thin_c *tc, dm_block_t virt_block,
+ dm_block_t data_origin, dm_block_t data_dest,
+ struct cell *cell, struct bio *bio)
+{
+ int r;
+ struct pool *pool = tc->pool;
+ struct new_mapping *m = get_next_mapping(pool);
+
+ INIT_LIST_HEAD(&m->list);
+ m->prepared = 0;
+ m->tc = tc;
+ m->virt_block = virt_block;
+ m->data_block = data_dest;
+ m->cell = cell;
+ m->err = 0;
+ m->bio = NULL;
+
+ ds_add_work(&pool->ds, &m->list);
+
+ /*
+ * IO to pool_dev remaps to the pool target's data_dev.
+ *
+ * If the whole block of data is being overwritten, we can issue the
+ * bio immediately. Otherwise we use kcopyd to clone the data first.
+ */
+ if (io_overwrites_block(pool, bio)) {
+ m->bio = bio;
+ save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+ dm_get_mapinfo(bio)->ptr = m;
+ remap_and_issue(tc, bio, data_dest);
+ } else {
+ struct dm_io_region from, to;
+
+ from.bdev = tc->pool_dev->bdev;
+ from.sector = data_origin * pool->sectors_per_block;
+ from.count = pool->sectors_per_block;
+
+ to.bdev = tc->pool_dev->bdev;
+ to.sector = data_dest * pool->sectors_per_block;
+ to.count = pool->sectors_per_block;
+
+ r = dm_kcopyd_copy(pool->copier, &from, 1, &to,
+ 0, copy_complete, m);
+ if (r < 0) {
+ mempool_free(m, pool->mapping_pool);
+ DMERR("dm_kcopyd_copy() failed");
+ cell_error(cell);
+ }
+ }
+}
+
+static void schedule_zero(struct thin_c *tc, dm_block_t virt_block,
+ dm_block_t data_block, struct cell *cell,
+ struct bio *bio)
+{
+ struct pool *pool = tc->pool;
+ struct new_mapping *m = get_next_mapping(pool);
+
+ INIT_LIST_HEAD(&m->list);
+ m->prepared = 0;
+ m->tc = tc;
+ m->virt_block = virt_block;
+ m->data_block = data_block;
+ m->cell = cell;
+ m->err = 0;
+ m->bio = NULL;
+
+ /*
+ * If the whole block of data is being overwritten or we are not
+ * zeroing pre-existing data, we can issue the bio immediately.
+ * Otherwise we use kcopyd to zero the data first.
+ */
+ if (!pool->zero_new_blocks)
+ process_prepared_mapping(m);
+
+ else if (io_overwrites_block(pool, bio)) {
+ m->bio = bio;
+ save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+ dm_get_mapinfo(bio)->ptr = m;
+ remap_and_issue(tc, bio, data_block);
+
+ } else {
+ int r;
+ struct dm_io_region to;
+
+ to.bdev = tc->pool_dev->bdev;
+ to.sector = data_block * pool->sectors_per_block;
+ to.count = pool->sectors_per_block;
+
+ r = dm_kcopyd_zero(pool->copier, 1, &to, 0, copy_complete, m);
+ if (r < 0) {
+ mempool_free(m, pool->mapping_pool);
+ DMERR("dm_kcopyd_zero() failed");
+ cell_error(cell);
+ }
+ }
+}
+
+static int alloc_data_block(struct thin_c *tc, dm_block_t *result)
+{
+ int r;
+ dm_block_t free_blocks;
+ unsigned long flags;
+ struct pool *pool = tc->pool;
+
+ r = dm_pool_get_free_block_count(pool->pmd, &free_blocks);
+ if (r)
+ return r;
+
+ if (free_blocks <= pool->low_water_blocks && !pool->low_water_triggered) {
+ DMWARN("%s: reached low water mark, sending event.",
+ dm_device_name(pool->pool_md));
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->low_water_triggered = 1;
+ spin_unlock_irqrestore(&pool->lock, flags);
+ dm_table_event(pool->ti->table);
+ }
+
+ if (!free_blocks) {
+ if (pool->no_free_space)
+ return -ENOSPC;
+ else {
+ /*
+ * Try to commit to see if that will free up some
+ * more space.
+ */
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+
+ r = dm_pool_get_free_block_count(pool->pmd, &free_blocks);
+ if (r)
+ return r;
+
+ /*
+ * If we still have no space we set a flag to avoid
+ * doing all this checking and return -ENOSPC.
+ */
+ if (!free_blocks) {
+ DMWARN("%s: no free space available.",
+ dm_device_name(pool->pool_md));
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->no_free_space = 1;
+ spin_unlock_irqrestore(&pool->lock, flags);
+ return -ENOSPC;
+ }
+ }
+ }
+
+ r = dm_pool_alloc_data_block(pool->pmd, result);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+/*
+ * If we have run out of space, queue bios until the device is
+ * resumed, presumably after having been reloaded with more space.
+ */
+static void retry_on_resume(struct bio *bio)
+{
+ struct thin_c *tc = dm_get_mapinfo(bio)->ptr;
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_add(&pool->retry_on_resume_list, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
+static void no_space(struct cell *cell)
+{
+ struct bio *bio;
+ struct bio_list bios;
+
+ bio_list_init(&bios);
+ cell_release(cell, &bios);
+
+ while ((bio = bio_list_pop(&bios)))
+ retry_on_resume(bio);
+}
+
+static void break_sharing(struct thin_c *tc, struct bio *bio, dm_block_t block,
+ struct cell_key *key,
+ struct dm_thin_lookup_result *lookup_result,
+ struct cell *cell)
+{
+ int r;
+ dm_block_t data_block;
+
+ r = alloc_data_block(tc, &data_block);
+ switch (r) {
+ case 0:
+ schedule_copy(tc, block, lookup_result->block,
+ data_block, cell, bio);
+ break;
+
+ case -ENOSPC:
+ no_space(cell);
+ break;
+
+ default:
+ DMERR("%s: alloc_data_block() failed, error = %d", __func__, r);
+ cell_error(cell);
+ break;
+ }
+}
+
+static void process_shared_bio(struct thin_c *tc, struct bio *bio,
+ dm_block_t block,
+ struct dm_thin_lookup_result *lookup_result)
+{
+ struct cell *cell;
+ struct pool *pool = tc->pool;
+ struct cell_key key;
+
+ /*
+ * If cell is already occupied, then sharing is already in the process
+ * of being broken so we have nothing further to do here.
+ */
+ build_data_key(tc->td, lookup_result->block, &key);
+ if (bio_detain(pool->prison, &key, bio, &cell))
+ return;
+
+ if (bio_data_dir(bio) == WRITE)
+ break_sharing(tc, bio, block, &key, lookup_result, cell);
+ else {
+ struct endio_hook *h;
+ h = mempool_alloc(pool->endio_hook_pool, GFP_NOIO);
+
+ h->tc = tc;
+ h->entry = ds_inc(&pool->ds);
+ save_and_set_endio(bio, &h->saved_bi_end_io, shared_read_endio);
+ dm_get_mapinfo(bio)->ptr = h;
+
+ cell_release_singleton(cell, bio);
+ remap_and_issue(tc, bio, lookup_result->block);
+ }
+}
+
+static void provision_block(struct thin_c *tc, struct bio *bio, dm_block_t block,
+ struct cell *cell)
+{
+ int r;
+ dm_block_t data_block;
+
+ /*
+ * Remap empty bios (flushes) immediately, without provisioning.
+ */
+ if (!bio->bi_size) {
+ cell_release_singleton(cell, bio);
+ remap_and_issue(tc, bio, 0);
+ return;
+ }
+
+ /*
+ * Fill read bios with zeroes and complete them immediately.
+ */
+ if (bio_data_dir(bio) == READ) {
+ zero_fill_bio(bio);
+ cell_release_singleton(cell, bio);
+ bio_endio(bio, 0);
+ return;
+ }
+
+ r = alloc_data_block(tc, &data_block);
+ switch (r) {
+ case 0:
+ schedule_zero(tc, block, data_block, cell, bio);
+ break;
+
+ case -ENOSPC:
+ no_space(cell);
+ break;
+
+ default:
+ DMERR("%s: alloc_data_block() failed, error = %d", __func__, r);
+ cell_error(cell);
+ break;
+ }
+}
+
+static void process_bio(struct thin_c *tc, struct bio *bio)
+{
+ int r;
+ dm_block_t block = get_bio_block(tc, bio);
+ struct cell *cell;
+ struct cell_key key;
+ struct dm_thin_lookup_result lookup_result;
+
+ /*
+ * If cell is already occupied, then the block is already
+ * being provisioned so we have nothing further to do here.
+ */
+ build_virtual_key(tc->td, block, &key);
+ if (bio_detain(tc->pool->prison, &key, bio, &cell))
+ return;
+
+ r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
+ switch (r) {
+ case 0:
+ /*
+ * We can release this cell now. This thread is the only
+ * one that puts bios into a cell, and we know there were
+ * no preceding bios.
+ */
+ /*
+ * TODO: this will probably have to change when discard goes
+ * back in.
+ */
+ cell_release_singleton(cell, bio);
+
+ if (lookup_result.shared)
+ process_shared_bio(tc, bio, block, &lookup_result);
+ else
+ remap_and_issue(tc, bio, lookup_result.block);
+ break;
+
+ case -ENODATA:
+ provision_block(tc, bio, block, cell);
+ break;
+
+ default:
+ DMERR("dm_thin_find_block() failed, error = %d", r);
+ bio_io_error(bio);
+ break;
+ }
+}
+
+static void process_deferred_bios(struct pool *pool)
+{
+ unsigned long flags;
+ struct bio *bio;
+ struct bio_list bios;
+ int r;
+
+ bio_list_init(&bios);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_merge(&bios, &pool->deferred_bios);
+ bio_list_init(&pool->deferred_bios);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ while ((bio = bio_list_pop(&bios))) {
+ struct thin_c *tc = dm_get_mapinfo(bio)->ptr;
+ /*
+ * If we've got no free new_mapping structs, and processing
+ * this bio might require one, we pause until there are some
+ * prepared mappings to process.
+ */
+ if (ensure_next_mapping(pool)) {
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_merge(&pool->deferred_bios, &bios);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ break;
+ }
+ process_bio(tc, bio);
+ }
+
+ /*
+ * If there are any deferred flush bios, we must commit
+ * the metadata before issuing them.
+ */
+ bio_list_init(&bios);
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_merge(&bios, &pool->deferred_flush_bios);
+ bio_list_init(&pool->deferred_flush_bios);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ if (bio_list_empty(&bios))
+ return;
+
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ while ((bio = bio_list_pop(&bios)))
+ bio_io_error(bio);
+ return;
+ }
+
+ while ((bio = bio_list_pop(&bios)))
+ generic_make_request(bio);
+}
+
+static void do_worker(struct work_struct *ws)
+{
+ struct pool *pool = container_of(ws, struct pool, worker);
+
+ process_prepared_mappings(pool);
+ process_deferred_bios(pool);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Mapping functions.
+ */
+
+/*
+ * Called only while mapping a thin bio to hand it over to the workqueue.
+ */
+static void thin_defer_bio(struct thin_c *tc, struct bio *bio)
+{
+ unsigned long flags;
+ struct pool *pool = tc->pool;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ bio_list_add(&pool->deferred_bios, bio);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+/*
+ * Non-blocking function called from the thin target's map function.
+ */
+static int thin_bio_map(struct dm_target *ti, struct bio *bio,
+ union map_info *map_context)
+{
+ int r;
+ struct thin_c *tc = ti->private;
+ dm_block_t block = get_bio_block(tc, bio);
+ struct dm_thin_device *td = tc->td;
+ struct dm_thin_lookup_result result;
+
+ /*
+ * Save the thin context for easy access from the deferred bio later.
+ */
+ map_context->ptr = tc;
+
+ if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
+ thin_defer_bio(tc, bio);
+ return DM_MAPIO_SUBMITTED;
+ }
+
+ r = dm_thin_find_block(td, block, 0, &result);
+
+ /*
+ * Note that we defer readahead too.
+ */
+ switch (r) {
+ case 0:
+ if (unlikely(result.shared)) {
+ /*
+ * We have a race condition here between the
+ * result.shared value returned by the lookup and
+ * snapshot creation, which may cause new
+ * sharing.
+ *
+ * To avoid this always quiesce the origin before
+ * taking the snap. You want to do this anyway to
+ * ensure a consistent application view
+ * (i.e. lockfs).
+ *
+ * More distant ancestors are irrelevant. The
+ * shared flag will be set in their case.
+ */
+ thin_defer_bio(tc, bio);
+ r = DM_MAPIO_SUBMITTED;
+ } else {
+ remap(tc, bio, result.block);
+ r = DM_MAPIO_REMAPPED;
+ }
+ break;
+
+ case -ENODATA:
+ /*
+ * In future, the failed dm_thin_find_block above could
+ * provide the hint to load the metadata into cache.
+ */
+ case -EWOULDBLOCK:
+ thin_defer_bio(tc, bio);
+ r = DM_MAPIO_SUBMITTED;
+ break;
+ }
+
+ return r;
+}
+
+static int pool_is_congested(struct dm_target_callbacks *cb, int bdi_bits)
+{
+ int r;
+ unsigned long flags;
+ struct pool_c *pt = container_of(cb, struct pool_c, callbacks);
+
+ spin_lock_irqsave(&pt->pool->lock, flags);
+ r = !bio_list_empty(&pt->pool->retry_on_resume_list);
+ spin_unlock_irqrestore(&pt->pool->lock, flags);
+
+ if (!r) {
+ struct request_queue *q = bdev_get_queue(pt->data_dev->bdev);
+ r = bdi_congested(&q->backing_dev_info, bdi_bits);
+ }
+
+ return r;
+}
+
+static void __requeue_bios(struct pool *pool)
+{
+ bio_list_merge(&pool->deferred_bios, &pool->retry_on_resume_list);
+ bio_list_init(&pool->retry_on_resume_list);
+}
+
+/*----------------------------------------------------------------
+ * Binding of control targets to a pool object
+ *--------------------------------------------------------------*/
+static int bind_control_target(struct pool *pool, struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+
+ pool->ti = ti;
+ pool->low_water_blocks = pt->low_water_blocks;
+ pool->zero_new_blocks = pt->zero_new_blocks;
+
+ return 0;
+}
+
+static void unbind_control_target(struct pool *pool, struct dm_target *ti)
+{
+ if (pool->ti == ti)
+ pool->ti = NULL;
+}
+
+/*----------------------------------------------------------------
+ * Pool creation
+ *--------------------------------------------------------------*/
+static void __pool_destroy(struct pool *pool)
+{
+ __pool_table_remove(pool);
+
+ if (dm_pool_metadata_close(pool->pmd) < 0)
+ DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
+
+ prison_destroy(pool->prison);
+ dm_kcopyd_client_destroy(pool->copier);
+
+ if (pool->wq)
+ destroy_workqueue(pool->wq);
+
+ if (pool->next_mapping)
+ mempool_free(pool->next_mapping, pool->mapping_pool);
+ mempool_destroy(pool->mapping_pool);
+ mempool_destroy(pool->endio_hook_pool);
+ kfree(pool);
+}
+
+static struct pool *pool_create(struct mapped_device *pool_md,
+ struct block_device *metadata_dev,
+ unsigned long block_size, char **error)
+{
+ int r;
+ void *err_p;
+ struct pool *pool;
+ struct dm_pool_metadata *pmd;
+
+ pmd = dm_pool_metadata_open(metadata_dev, block_size);
+ if (IS_ERR(pmd)) {
+ *error = "Error creating metadata object";
+ return (struct pool *)pmd;
+ }
+
+ pool = kmalloc(sizeof(*pool), GFP_KERNEL);
+ if (!pool) {
+ *error = "Error allocating memory for pool";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_pool;
+ }
+
+ pool->pmd = pmd;
+ pool->sectors_per_block = block_size;
+ pool->block_shift = ffs(block_size) - 1;
+ pool->offset_mask = block_size - 1;
+ pool->low_water_blocks = 0;
+ pool->zero_new_blocks = 1;
+ pool->prison = prison_create(PRISON_CELLS);
+ if (!pool->prison) {
+ *error = "Error creating pool's bio prison";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_prison;
+ }
+
+ pool->copier = dm_kcopyd_client_create();
+ if (IS_ERR(pool->copier)) {
+ r = PTR_ERR(pool->copier);
+ *error = "Error creating pool's kcopyd client";
+ err_p = ERR_PTR(r);
+ goto bad_kcopyd_client;
+ }
+
+ /*
+ * Create singlethreaded workqueue that will service all devices
+ * that use this metadata.
+ */
+ pool->wq = alloc_ordered_workqueue("dm-" DM_MSG_PREFIX, WQ_MEM_RECLAIM);
+ if (!pool->wq) {
+ *error = "Error creating pool's workqueue";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_wq;
+ }
+
+ INIT_WORK(&pool->worker, do_worker);
+ spin_lock_init(&pool->lock);
+ bio_list_init(&pool->deferred_bios);
+ bio_list_init(&pool->deferred_flush_bios);
+ INIT_LIST_HEAD(&pool->prepared_mappings);
+ pool->low_water_triggered = 0;
+ pool->no_free_space = 0;
+ bio_list_init(&pool->retry_on_resume_list);
+ ds_init(&pool->ds);
+
+ pool->next_mapping = NULL;
+ pool->mapping_pool =
+ mempool_create_kmalloc_pool(MAPPING_POOL_SIZE, sizeof(struct new_mapping));
+ if (!pool->mapping_pool) {
+ *error = "Error creating pool's mapping mempool";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_mapping_pool;
+ }
+
+ pool->endio_hook_pool =
+ mempool_create_kmalloc_pool(ENDIO_HOOK_POOL_SIZE, sizeof(struct endio_hook));
+ if (!pool->endio_hook_pool) {
+ *error = "Error creating pool's endio_hook mempool";
+ err_p = ERR_PTR(-ENOMEM);
+ goto bad_endio_hook_pool;
+ }
+ pool->ref_count = 1;
+ pool->pool_md = pool_md;
+ pool->md_dev = metadata_dev;
+ __pool_table_insert(pool);
+
+ return pool;
+
+bad_endio_hook_pool:
+ mempool_destroy(pool->mapping_pool);
+bad_mapping_pool:
+ destroy_workqueue(pool->wq);
+bad_wq:
+ dm_kcopyd_client_destroy(pool->copier);
+bad_kcopyd_client:
+ prison_destroy(pool->prison);
+bad_prison:
+ kfree(pool);
+bad_pool:
+ if (dm_pool_metadata_close(pmd))
+ DMWARN("%s: dm_pool_metadata_close() failed.", __func__);
+
+ return err_p;
+}
+
+static void __pool_inc(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ pool->ref_count++;
+}
+
+static void __pool_dec(struct pool *pool)
+{
+ BUG_ON(!mutex_is_locked(&dm_thin_pool_table.mutex));
+ BUG_ON(!pool->ref_count);
+ if (!--pool->ref_count)
+ __pool_destroy(pool);
+}
+
+static struct pool *__pool_find(struct mapped_device *pool_md,
+ struct block_device *metadata_dev,
+ unsigned long block_size, char **error)
+{
+ struct pool *pool = __pool_table_lookup_metadata_dev(metadata_dev);
+
+ if (pool) {
+ if (pool->pool_md != pool_md)
+ return ERR_PTR(-EBUSY);
+ __pool_inc(pool);
+
+ } else {
+ pool = __pool_table_lookup(pool_md);
+ if (pool) {
+ if (pool->md_dev != metadata_dev)
+ return ERR_PTR(-EINVAL);
+ __pool_inc(pool);
+
+ } else
+ pool = pool_create(pool_md, metadata_dev, block_size, error);
+ }
+
+ return pool;
+}
+
+/*----------------------------------------------------------------
+ * Pool target methods
+ *--------------------------------------------------------------*/
+static void pool_dtr(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ unbind_control_target(pt->pool, ti);
+ __pool_dec(pt->pool);
+ dm_put_device(ti, pt->metadata_dev);
+ dm_put_device(ti, pt->data_dev);
+ kfree(pt);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+}
+
+struct pool_features {
+ unsigned zero_new_blocks:1;
+};
+
+static int parse_pool_features(struct dm_arg_set *as, struct pool_features *pf,
+ struct dm_target *ti)
+{
+ int r;
+ unsigned argc;
+ const char *arg_name;
+
+ static struct dm_arg _args[] = {
+ {0, 1, "Invalid number of pool feature arguments"},
+ };
+
+ /*
+ * No feature arguments supplied.
+ */
+ if (!as->argc)
+ return 0;
+
+ r = dm_read_arg_group(_args, as, &argc, &ti->error);
+ if (r)
+ return -EINVAL;
+
+ while (argc && !r) {
+ arg_name = dm_shift_arg(as);
+ argc--;
+
+ if (!strcasecmp(arg_name, "skip_block_zeroing")) {
+ pf->zero_new_blocks = 0;
+ continue;
+ }
+
+ ti->error = "Unrecognised pool feature requested";
+ r = -EINVAL;
+ }
+
+ return r;
+}
+
+/*
+ * thin-pool <metadata dev> <data dev>
+ * <data block size (sectors)>
+ * <low water mark (blocks)>
+ * [<#feature args> [<arg>]*]
+ *
+ * Optional feature arguments are:
+ * skip_block_zeroing: skips the zeroing of newly-provisioned blocks.
+ */
+static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv)
+{
+ int r;
+ struct pool_c *pt;
+ struct pool *pool;
+ struct pool_features pf;
+ struct dm_arg_set as;
+ struct dm_dev *data_dev;
+ unsigned long block_size;
+ dm_block_t low_water_blocks;
+ struct dm_dev *metadata_dev;
+ sector_t metadata_dev_size;
+
+ /*
+ * FIXME Remove validation from scope of lock.
+ */
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ if (argc < 4) {
+ ti->error = "Invalid argument count";
+ r = -EINVAL;
+ goto out_unlock;
+ }
+ as.argc = argc;
+ as.argv = argv;
+
+ r = dm_get_device(ti, argv[0], FMODE_READ | FMODE_WRITE, &metadata_dev);
+ if (r) {
+ ti->error = "Error opening metadata block device";
+ goto out_unlock;
+ }
+
+ metadata_dev_size = i_size_read(metadata_dev->bdev->bd_inode) >> SECTOR_SHIFT;
+ if (metadata_dev_size > METADATA_DEV_MAX_SECTORS) {
+ ti->error = "Metadata device is too large";
+ r = -EINVAL;
+ goto out_metadata;
+ }
+
+ r = dm_get_device(ti, argv[1], FMODE_READ | FMODE_WRITE, &data_dev);
+ if (r) {
+ ti->error = "Error getting data device";
+ goto out_metadata;
+ }
+
+ if (kstrtoul(argv[2], 10, &block_size) || !block_size ||
+ block_size < DATA_DEV_BLOCK_SIZE_MIN_SECTORS ||
+ block_size > DATA_DEV_BLOCK_SIZE_MAX_SECTORS ||
+ !is_power_of_2(block_size)) {
+ ti->error = "Invalid block size";
+ r = -EINVAL;
+ goto out;
+ }
+
+ if (kstrtoull(argv[3], 10, (unsigned long long *)&low_water_blocks)) {
+ ti->error = "Invalid low water mark";
+ r = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * Set default pool features.
+ */
+ memset(&pf, 0, sizeof(pf));
+ pf.zero_new_blocks = 1;
+
+ dm_consume_args(&as, 4);
+ r = parse_pool_features(&as, &pf, ti);
+ if (r)
+ goto out;
+
+ pt = kzalloc(sizeof(*pt), GFP_KERNEL);
+ if (!pt) {
+ r = -ENOMEM;
+ goto out;
+ }
+
+ pool = __pool_find(dm_table_get_md(ti->table), metadata_dev->bdev,
+ block_size, &ti->error);
+ if (IS_ERR(pool)) {
+ r = PTR_ERR(pool);
+ goto out_free_pt;
+ }
+
+ pt->pool = pool;
+ pt->ti = ti;
+ pt->metadata_dev = metadata_dev;
+ pt->data_dev = data_dev;
+ pt->low_water_blocks = low_water_blocks;
+ pt->zero_new_blocks = pf.zero_new_blocks;
+ ti->num_flush_requests = 1;
+ ti->num_discard_requests = 0;
+ ti->private = pt;
+
+ pt->callbacks.congested_fn = pool_is_congested;
+ dm_table_add_target_callbacks(ti->table, &pt->callbacks);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return 0;
+
+out_free_pt:
+ kfree(pt);
+out:
+ dm_put_device(ti, data_dev);
+out_metadata:
+ dm_put_device(ti, metadata_dev);
+out_unlock:
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return r;
+}
+
+static int pool_map(struct dm_target *ti, struct bio *bio,
+ union map_info *map_context)
+{
+ int r;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ /*
+ * As this is a singleton target, ti->begin is always zero.
+ */
+ spin_lock_irqsave(&pool->lock, flags);
+ bio->bi_bdev = pt->data_dev->bdev;
+ r = DM_MAPIO_REMAPPED;
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ return r;
+}
+
+/*
+ * Retrieves the number of blocks of the data device from
+ * the superblock and compares it to the actual device size,
+ * thus resizing the data device in case it has grown.
+ *
+ * This both copes with opening preallocated data devices in the ctr
+ * being followed by a resume
+ * -and-
+ * calling the resume method individually after userspace has
+ * grown the data device in reaction to a table event.
+ */
+static int pool_preresume(struct dm_target *ti)
+{
+ int r;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ dm_block_t data_size, sb_data_size;
+
+ /*
+ * Take control of the pool object.
+ */
+ r = bind_control_target(pool, ti);
+ if (r)
+ return r;
+
+ data_size = ti->len >> pool->block_shift;
+ r = dm_pool_get_data_dev_size(pool->pmd, &sb_data_size);
+ if (r) {
+ DMERR("failed to retrieve data device size");
+ return r;
+ }
+
+ if (data_size < sb_data_size) {
+ DMERR("pool target too small, is %llu blocks (expected %llu)",
+ data_size, sb_data_size);
+ return -EINVAL;
+
+ } else if (data_size > sb_data_size) {
+ r = dm_pool_resize_data_dev(pool->pmd, data_size);
+ if (r) {
+ DMERR("failed to resize data device");
+ return r;
+ }
+
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ return r;
+ }
+ }
+
+ return 0;
+}
+
+static void pool_resume(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->low_water_triggered = 0;
+ pool->no_free_space = 0;
+ __requeue_bios(pool);
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ wake_worker(pool);
+}
+
+static void pool_postsuspend(struct dm_target *ti)
+{
+ int r;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ flush_workqueue(pool->wq);
+
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r < 0) {
+ DMERR("%s: dm_pool_commit_metadata() failed, error = %d",
+ __func__, r);
+ /* FIXME: invalidate device? error the next FUA or FLUSH bio ?*/
+ }
+}
+
+static int check_arg_count(unsigned argc, unsigned args_required)
+{
+ if (argc != args_required) {
+ DMWARN("Message received with %u arguments instead of %u.",
+ argc, args_required);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int read_dev_id(char *arg, dm_thin_id *dev_id, int warning)
+{
+ if (!kstrtoull(arg, 10, (unsigned long long *)dev_id) &&
+ *dev_id <= MAX_DEV_ID)
+ return 0;
+
+ if (warning)
+ DMWARN("Message received with invalid device id: %s", arg);
+
+ return -EINVAL;
+}
+
+static int process_create_thin_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id dev_id;
+ int r;
+
+ r = check_arg_count(argc, 2);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[1], &dev_id, 1);
+ if (r)
+ return r;
+
+ r = dm_pool_create_thin(pool->pmd, dev_id);
+ if (r) {
+ DMWARN("Creation of new thinly-provisioned device with id %s failed.",
+ argv[1]);
+ return r;
+ }
+
+ return 0;
+}
+
+static int process_create_snap_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id dev_id;
+ dm_thin_id origin_dev_id;
+ int r;
+
+ r = check_arg_count(argc, 3);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[1], &dev_id, 1);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[2], &origin_dev_id, 1);
+ if (r)
+ return r;
+
+ r = dm_pool_create_snap(pool->pmd, dev_id, origin_dev_id);
+ if (r) {
+ DMWARN("Creation of new snapshot %s of device %s failed.",
+ argv[1], argv[2]);
+ return r;
+ }
+
+ return 0;
+}
+
+static int process_delete_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id dev_id;
+ int r;
+
+ r = check_arg_count(argc, 2);
+ if (r)
+ return r;
+
+ r = read_dev_id(argv[1], &dev_id, 1);
+ if (r)
+ return r;
+
+ r = dm_pool_delete_thin_device(pool->pmd, dev_id);
+ if (r)
+ DMWARN("Deletion of thin device %s failed.", argv[1]);
+
+ return r;
+}
+
+static int process_set_transaction_id_mesg(unsigned argc, char **argv, struct pool *pool)
+{
+ dm_thin_id old_id, new_id;
+ int r;
+
+ r = check_arg_count(argc, 3);
+ if (r)
+ return r;
+
+ if (kstrtoull(argv[1], 10, (unsigned long long *)&old_id)) {
+ DMWARN("set_transaction_id message: Unrecognised id %s.", argv[1]);
+ return -EINVAL;
+ }
+
+ if (kstrtoull(argv[2], 10, (unsigned long long *)&new_id)) {
+ DMWARN("set_transaction_id message: Unrecognised new id %s.", argv[2]);
+ return -EINVAL;
+ }
+
+ r = dm_pool_set_metadata_transaction_id(pool->pmd, old_id, new_id);
+ if (r) {
+ DMWARN("Failed to change transaction id from %s to %s.",
+ argv[1], argv[2]);
+ return r;
+ }
+
+ return 0;
+}
+
+/*
+ * Messages supported:
+ * create_thin <dev_id>
+ * create_snap <dev_id> <origin_id>
+ * delete <dev_id>
+ * trim <dev_id> <new_size_in_sectors>
+ * set_transaction_id <current_trans_id> <new_trans_id>
+ */
+static int pool_message(struct dm_target *ti, unsigned argc, char **argv)
+{
+ int r = -EINVAL;
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ if (!strcasecmp(argv[0], "create_thin"))
+ r = process_create_thin_mesg(argc, argv, pool);
+
+ else if (!strcasecmp(argv[0], "create_snap"))
+ r = process_create_snap_mesg(argc, argv, pool);
+
+ else if (!strcasecmp(argv[0], "delete"))
+ r = process_delete_mesg(argc, argv, pool);
+
+ else if (!strcasecmp(argv[0], "set_transaction_id"))
+ r = process_set_transaction_id_mesg(argc, argv, pool);
+
+ else
+ DMWARN("Unrecognised thin pool target message received: %s", argv[0]);
+
+ if (!r) {
+ r = dm_pool_commit_metadata(pool->pmd);
+ if (r)
+ DMERR("%s message: dm_pool_commit_metadata() failed, error = %d",
+ argv[0], r);
+ }
+
+ return r;
+}
+
+/*
+ * Status line is:
+ * <transaction id> <used metadata sectors>/<total metadata sectors>
+ * <used data sectors>/<total data sectors> <held metadata root>
+ */
+static int pool_status(struct dm_target *ti, status_type_t type,
+ char *result, unsigned maxlen)
+{
+ int r;
+ unsigned sz = 0;
+ uint64_t transaction_id;
+ dm_block_t nr_free_blocks_data;
+ dm_block_t nr_free_blocks_metadata;
+ dm_block_t nr_blocks_data;
+ dm_block_t nr_blocks_metadata;
+ dm_block_t held_root;
+ char buf[BDEVNAME_SIZE];
+ char buf2[BDEVNAME_SIZE];
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ switch (type) {
+ case STATUSTYPE_INFO:
+ r = dm_pool_get_metadata_transaction_id(pool->pmd,
+ &transaction_id);
+ if (r)
+ return r;
+
+ r = dm_pool_get_free_metadata_block_count(pool->pmd,
+ &nr_free_blocks_metadata);
+ if (r)
+ return r;
+
+ r = dm_pool_get_metadata_dev_size(pool->pmd, &nr_blocks_metadata);
+ if (r)
+ return r;
+
+ r = dm_pool_get_free_block_count(pool->pmd,
+ &nr_free_blocks_data);
+ if (r)
+ return r;
+
+ r = dm_pool_get_data_dev_size(pool->pmd, &nr_blocks_data);
+ if (r)
+ return r;
+
+ r = dm_pool_get_held_metadata_root(pool->pmd, &held_root);
+ if (r)
+ return r;
+
+ DMEMIT("%llu %llu/%llu %llu/%llu ",
+ (unsigned long long)transaction_id,
+ (unsigned long long)(nr_blocks_metadata - nr_free_blocks_metadata),
+ (unsigned long long)nr_blocks_metadata,
+ (unsigned long long)(nr_blocks_data - nr_free_blocks_data),
+ (unsigned long long)nr_blocks_data);
+
+ if (held_root)
+ DMEMIT("%llu", held_root);
+ else
+ DMEMIT("-");
+
+ break;
+
+ case STATUSTYPE_TABLE:
+ DMEMIT("%s %s %lu %llu ",
+ format_dev_t(buf, pt->metadata_dev->bdev->bd_dev),
+ format_dev_t(buf2, pt->data_dev->bdev->bd_dev),
+ (unsigned long)pool->sectors_per_block,
+ (unsigned long long)pt->low_water_blocks);
+
+ DMEMIT("%u ", !pool->zero_new_blocks);
+
+ if (!pool->zero_new_blocks)
+ DMEMIT("skip_block_zeroing ");
+ break;
+ }
+
+ return 0;
+}
+
+static int pool_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ struct pool_c *pt = ti->private;
+
+ return fn(ti, pt->data_dev, 0, ti->len, data);
+}
+
+static int pool_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
+ struct bio_vec *biovec, int max_size)
+{
+ struct pool_c *pt = ti->private;
+ struct request_queue *q = bdev_get_queue(pt->data_dev->bdev);
+
+ if (!q->merge_bvec_fn)
+ return max_size;
+
+ bvm->bi_bdev = pt->data_dev->bdev;
+
+ return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
+}
+
+static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+
+ blk_limits_io_min(limits, 0);
+ blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT);
+}
+
+static struct target_type pool_target = {
+ .name = "thin-pool",
+ .features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE |
+ DM_TARGET_IMMUTABLE,
+ .version = {1, 0, 0},
+ .module = THIS_MODULE,
+ .ctr = pool_ctr,
+ .dtr = pool_dtr,
+ .map = pool_map,
+ .postsuspend = pool_postsuspend,
+ .preresume = pool_preresume,
+ .resume = pool_resume,
+ .message = pool_message,
+ .status = pool_status,
+ .merge = pool_merge,
+ .iterate_devices = pool_iterate_devices,
+ .io_hints = pool_io_hints,
+};
+
+/*----------------------------------------------------------------
+ * Thin target methods
+ *--------------------------------------------------------------*/
+static void thin_dtr(struct dm_target *ti)
+{
+ struct thin_c *tc = ti->private;
+
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ __pool_dec(tc->pool);
+ dm_pool_close_thin_device(tc->td);
+ dm_put_device(ti, tc->pool_dev);
+ kfree(tc);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+}
+
+/*
+ * Thin target parameters:
+ *
+ * <pool_dev> <dev_id>
+ *
+ * pool_dev: the path to the pool (eg, /dev/mapper/my_pool)
+ * dev_id: the internal device identifier
+ */
+static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv)
+{
+ int r;
+ struct thin_c *tc;
+ struct dm_dev *pool_dev;
+ struct mapped_device *pool_md;
+
+ mutex_lock(&dm_thin_pool_table.mutex);
+
+ if (argc != 2) {
+ ti->error = "Invalid argument count";
+ r = -EINVAL;
+ goto out_unlock;
+ }
+
+ tc = ti->private = kzalloc(sizeof(*tc), GFP_KERNEL);
+ if (!tc) {
+ ti->error = "Out of memory";
+ r = -ENOMEM;
+ goto out_unlock;
+ }
+
+ r = dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), &pool_dev);
+ if (r) {
+ ti->error = "Error opening pool device";
+ goto bad_pool_dev;
+ }
+ tc->pool_dev = pool_dev;
+
+ if (read_dev_id(argv[1], (unsigned long long *)&tc->dev_id, 0)) {
+ ti->error = "Invalid device id";
+ r = -EINVAL;
+ goto bad_common;
+ }
+
+ pool_md = dm_get_md(tc->pool_dev->bdev->bd_dev);
+ if (!pool_md) {
+ ti->error = "Couldn't get pool mapped device";
+ r = -EINVAL;
+ goto bad_common;
+ }
+
+ tc->pool = __pool_table_lookup(pool_md);
+ if (!tc->pool) {
+ ti->error = "Couldn't find pool object";
+ r = -EINVAL;
+ goto bad_pool_lookup;
+ }
+ __pool_inc(tc->pool);
+
+ r = dm_pool_open_thin_device(tc->pool->pmd, tc->dev_id, &tc->td);
+ if (r) {
+ ti->error = "Couldn't open thin internal device";
+ goto bad_thin_open;
+ }
+
+ ti->split_io = tc->pool->sectors_per_block;
+ ti->num_flush_requests = 1;
+ ti->num_discard_requests = 0;
+ ti->discards_supported = 0;
+
+ dm_put(pool_md);
+
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return 0;
+
+bad_thin_open:
+ __pool_dec(tc->pool);
+bad_pool_lookup:
+ dm_put(pool_md);
+bad_common:
+ dm_put_device(ti, tc->pool_dev);
+bad_pool_dev:
+ kfree(tc);
+out_unlock:
+ mutex_unlock(&dm_thin_pool_table.mutex);
+
+ return r;
+}
+
+static int thin_map(struct dm_target *ti, struct bio *bio,
+ union map_info *map_context)
+{
+ bio->bi_sector -= ti->begin;
+
+ return thin_bio_map(ti, bio, map_context);
+}
+
+static void thin_postsuspend(struct dm_target *ti)
+{
+ if (dm_noflush_suspending(ti))
+ requeue_io((struct thin_c *)ti->private);
+}
+
+/*
+ * <nr mapped sectors> <highest mapped sector>
+ */
+static int thin_status(struct dm_target *ti, status_type_t type,
+ char *result, unsigned maxlen)
+{
+ int r;
+ ssize_t sz = 0;
+ dm_block_t mapped, highest;
+ char buf[BDEVNAME_SIZE];
+ struct thin_c *tc = ti->private;
+
+ if (!tc->td)
+ DMEMIT("-");
+ else {
+ switch (type) {
+ case STATUSTYPE_INFO:
+ r = dm_thin_get_mapped_count(tc->td, &mapped);
+ if (r)
+ return r;
+
+ r = dm_thin_get_highest_mapped_block(tc->td, &highest);
+ if (r < 0)
+ return r;
+
+ DMEMIT("%llu ", mapped * tc->pool->sectors_per_block);
+ if (r)
+ DMEMIT("%llu", ((highest + 1) *
+ tc->pool->sectors_per_block) - 1);
+ else
+ DMEMIT("-");
+ break;
+
+ case STATUSTYPE_TABLE:
+ DMEMIT("%s %lu",
+ format_dev_t(buf, tc->pool_dev->bdev->bd_dev),
+ (unsigned long) tc->dev_id);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int thin_iterate_devices(struct dm_target *ti,
+ iterate_devices_callout_fn fn, void *data)
+{
+ dm_block_t blocks;
+ struct thin_c *tc = ti->private;
+
+ /*
+ * We can't call dm_pool_get_data_dev_size() since that blocks. So
+ * we follow a more convoluted path through to the pool's target.
+ */
+ if (!tc->pool->ti)
+ return 0; /* nothing is bound */
+
+ blocks = tc->pool->ti->len >> tc->pool->block_shift;
+ if (blocks)
+ return fn(ti, tc->pool_dev, 0, tc->pool->sectors_per_block * blocks, data);
+
+ return 0;
+}
+
+static void thin_io_hints(struct dm_target *ti, struct queue_limits *limits)
+{
+ struct thin_c *tc = ti->private;
+
+ blk_limits_io_min(limits, 0);
+ blk_limits_io_opt(limits, tc->pool->sectors_per_block << SECTOR_SHIFT);
+}
+
+static struct target_type thin_target = {
+ .name = "thin",
+ .version = {1, 0, 0},
+ .module = THIS_MODULE,
+ .ctr = thin_ctr,
+ .dtr = thin_dtr,
+ .map = thin_map,
+ .postsuspend = thin_postsuspend,
+ .status = thin_status,
+ .iterate_devices = thin_iterate_devices,
+ .io_hints = thin_io_hints,
+};
+
+/*----------------------------------------------------------------*/
+
+static int __init dm_thin_init(void)
+{
+ int r;
+
+ pool_table_init();
+
+ r = dm_register_target(&thin_target);
+ if (r)
+ return r;
+
+ r = dm_register_target(&pool_target);
+ if (r)
+ dm_unregister_target(&thin_target);
+
+ return r;
+}
+
+static void dm_thin_exit(void)
+{
+ dm_unregister_target(&thin_target);
+ dm_unregister_target(&pool_target);
+}
+
+module_init(dm_thin_init);
+module_exit(dm_thin_exit);
+
+MODULE_DESCRIPTION(DM_NAME "device-mapper thin provisioning target");
+MODULE_AUTHOR("Joe Thornber <dm-devel@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 52b39f3..6b6616a 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -25,6 +25,16 @@
#define DM_MSG_PREFIX "core"
+#ifdef CONFIG_PRINTK
+/*
+ * ratelimit state to be used in DMXXX_LIMIT().
+ */
+DEFINE_RATELIMIT_STATE(dm_ratelimit_state,
+ DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+EXPORT_SYMBOL(dm_ratelimit_state);
+#endif
+
/*
* Cookies are numeric values sent with CHANGE and REMOVE
* uevents while resuming, removing or renaming the device.
@@ -130,6 +140,8 @@
/* Protect queue and type against concurrent access. */
struct mutex type_lock;
+ struct target_type *immutable_target_type;
+
struct gendisk *disk;
char name[16];
@@ -2086,6 +2098,8 @@
write_lock_irqsave(&md->map_lock, flags);
old_map = md->map;
md->map = t;
+ md->immutable_target_type = dm_table_get_immutable_target_type(t);
+
dm_table_set_restrictions(t, q, limits);
if (merge_is_optional)
set_bit(DMF_MERGE_IS_OPTIONAL, &md->flags);
@@ -2156,6 +2170,11 @@
return md->type;
}
+struct target_type *dm_get_immutable_target_type(struct mapped_device *md)
+{
+ return md->immutable_target_type;
+}
+
/*
* Fully initialize a request-based queue (->elevator, ->request_fn, etc).
*/
@@ -2231,6 +2250,7 @@
return md;
}
+EXPORT_SYMBOL_GPL(dm_get_md);
void *dm_get_mdptr(struct mapped_device *md)
{
@@ -2316,7 +2336,6 @@
while (1) {
set_current_state(interruptible);
- smp_mb();
if (!md_in_flight(md))
break;
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 6745dbd..b7dacd5 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -60,6 +60,7 @@
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
int dm_table_any_busy_target(struct dm_table *t);
unsigned dm_table_get_type(struct dm_table *t);
+struct target_type *dm_table_get_immutable_target_type(struct dm_table *t);
bool dm_table_request_based(struct dm_table *t);
bool dm_table_supports_discards(struct dm_table *t);
int dm_table_alloc_md_mempools(struct dm_table *t);
@@ -72,6 +73,7 @@
void dm_unlock_md_type(struct mapped_device *md);
void dm_set_md_type(struct mapped_device *md, unsigned type);
unsigned dm_get_md_type(struct mapped_device *md);
+struct target_type *dm_get_immutable_target_type(struct mapped_device *md);
int dm_setup_md_queue(struct mapped_device *md);
diff --git a/drivers/md/persistent-data/Kconfig b/drivers/md/persistent-data/Kconfig
new file mode 100644
index 0000000..ceb3590
--- /dev/null
+++ b/drivers/md/persistent-data/Kconfig
@@ -0,0 +1,8 @@
+config DM_PERSISTENT_DATA
+ tristate
+ depends on BLK_DEV_DM && EXPERIMENTAL
+ select LIBCRC32C
+ select DM_BUFIO
+ ---help---
+ Library providing immutable on-disk data structure support for
+ device-mapper targets such as the thin provisioning target.
diff --git a/drivers/md/persistent-data/Makefile b/drivers/md/persistent-data/Makefile
new file mode 100644
index 0000000..cfa95f6
--- /dev/null
+++ b/drivers/md/persistent-data/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_DM_PERSISTENT_DATA) += dm-persistent-data.o
+dm-persistent-data-objs := \
+ dm-block-manager.o \
+ dm-space-map-checker.o \
+ dm-space-map-common.o \
+ dm-space-map-disk.o \
+ dm-space-map-metadata.o \
+ dm-transaction-manager.o \
+ dm-btree.o \
+ dm-btree-remove.o \
+ dm-btree-spine.o
diff --git a/drivers/md/persistent-data/dm-block-manager.c b/drivers/md/persistent-data/dm-block-manager.c
new file mode 100644
index 0000000..0317ecd
--- /dev/null
+++ b/drivers/md/persistent-data/dm-block-manager.c
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+#include "dm-block-manager.h"
+#include "dm-persistent-data-internal.h"
+#include "../dm-bufio.h"
+
+#include <linux/crc32c.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/rwsem.h>
+#include <linux/device-mapper.h>
+#include <linux/stacktrace.h>
+
+#define DM_MSG_PREFIX "block manager"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * This is a read/write semaphore with a couple of differences.
+ *
+ * i) There is a restriction on the number of concurrent read locks that
+ * may be held at once. This is just an implementation detail.
+ *
+ * ii) Recursive locking attempts are detected and return EINVAL. A stack
+ * trace is also emitted for the previous lock aquisition.
+ *
+ * iii) Priority is given to write locks.
+ */
+#define MAX_HOLDERS 4
+#define MAX_STACK 10
+
+typedef unsigned long stack_entries[MAX_STACK];
+
+struct block_lock {
+ spinlock_t lock;
+ __s32 count;
+ struct list_head waiters;
+ struct task_struct *holders[MAX_HOLDERS];
+
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ struct stack_trace traces[MAX_HOLDERS];
+ stack_entries entries[MAX_HOLDERS];
+#endif
+};
+
+struct waiter {
+ struct list_head list;
+ struct task_struct *task;
+ int wants_write;
+};
+
+static unsigned __find_holder(struct block_lock *lock,
+ struct task_struct *task)
+{
+ unsigned i;
+
+ for (i = 0; i < MAX_HOLDERS; i++)
+ if (lock->holders[i] == task)
+ break;
+
+ BUG_ON(i == MAX_HOLDERS);
+ return i;
+}
+
+/* call this *after* you increment lock->count */
+static void __add_holder(struct block_lock *lock, struct task_struct *task)
+{
+ unsigned h = __find_holder(lock, NULL);
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ struct stack_trace *t;
+#endif
+
+ get_task_struct(task);
+ lock->holders[h] = task;
+
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ t = lock->traces + h;
+ t->nr_entries = 0;
+ t->max_entries = MAX_STACK;
+ t->entries = lock->entries[h];
+ t->skip = 2;
+ save_stack_trace(t);
+#endif
+}
+
+/* call this *before* you decrement lock->count */
+static void __del_holder(struct block_lock *lock, struct task_struct *task)
+{
+ unsigned h = __find_holder(lock, task);
+ lock->holders[h] = NULL;
+ put_task_struct(task);
+}
+
+static int __check_holder(struct block_lock *lock)
+{
+ unsigned i;
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ static struct stack_trace t;
+ static stack_entries entries;
+#endif
+
+ for (i = 0; i < MAX_HOLDERS; i++) {
+ if (lock->holders[i] == current) {
+ DMERR("recursive lock detected in pool metadata");
+#ifdef CONFIG_DM_DEBUG_BLOCK_STACK_TRACING
+ DMERR("previously held here:");
+ print_stack_trace(lock->traces + i, 4);
+
+ DMERR("subsequent aquisition attempted here:");
+ t.nr_entries = 0;
+ t.max_entries = MAX_STACK;
+ t.entries = entries;
+ t.skip = 3;
+ save_stack_trace(&t);
+ print_stack_trace(&t, 4);
+#endif
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void __wait(struct waiter *w)
+{
+ for (;;) {
+ set_task_state(current, TASK_UNINTERRUPTIBLE);
+
+ if (!w->task)
+ break;
+
+ schedule();
+ }
+
+ set_task_state(current, TASK_RUNNING);
+}
+
+static void __wake_waiter(struct waiter *w)
+{
+ struct task_struct *task;
+
+ list_del(&w->list);
+ task = w->task;
+ smp_mb();
+ w->task = NULL;
+ wake_up_process(task);
+}
+
+/*
+ * We either wake a few readers or a single writer.
+ */
+static void __wake_many(struct block_lock *lock)
+{
+ struct waiter *w, *tmp;
+
+ BUG_ON(lock->count < 0);
+ list_for_each_entry_safe(w, tmp, &lock->waiters, list) {
+ if (lock->count >= MAX_HOLDERS)
+ return;
+
+ if (w->wants_write) {
+ if (lock->count > 0)
+ return; /* still read locked */
+
+ lock->count = -1;
+ __add_holder(lock, w->task);
+ __wake_waiter(w);
+ return;
+ }
+
+ lock->count++;
+ __add_holder(lock, w->task);
+ __wake_waiter(w);
+ }
+}
+
+static void bl_init(struct block_lock *lock)
+{
+ int i;
+
+ spin_lock_init(&lock->lock);
+ lock->count = 0;
+ INIT_LIST_HEAD(&lock->waiters);
+ for (i = 0; i < MAX_HOLDERS; i++)
+ lock->holders[i] = NULL;
+}
+
+static int __available_for_read(struct block_lock *lock)
+{
+ return lock->count >= 0 &&
+ lock->count < MAX_HOLDERS &&
+ list_empty(&lock->waiters);
+}
+
+static int bl_down_read(struct block_lock *lock)
+{
+ int r;
+ struct waiter w;
+
+ spin_lock(&lock->lock);
+ r = __check_holder(lock);
+ if (r) {
+ spin_unlock(&lock->lock);
+ return r;
+ }
+
+ if (__available_for_read(lock)) {
+ lock->count++;
+ __add_holder(lock, current);
+ spin_unlock(&lock->lock);
+ return 0;
+ }
+
+ get_task_struct(current);
+
+ w.task = current;
+ w.wants_write = 0;
+ list_add_tail(&w.list, &lock->waiters);
+ spin_unlock(&lock->lock);
+
+ __wait(&w);
+ put_task_struct(current);
+ return 0;
+}
+
+static int bl_down_read_nonblock(struct block_lock *lock)
+{
+ int r;
+
+ spin_lock(&lock->lock);
+ r = __check_holder(lock);
+ if (r)
+ goto out;
+
+ if (__available_for_read(lock)) {
+ lock->count++;
+ __add_holder(lock, current);
+ r = 0;
+ } else
+ r = -EWOULDBLOCK;
+
+out:
+ spin_unlock(&lock->lock);
+ return r;
+}
+
+static void bl_up_read(struct block_lock *lock)
+{
+ spin_lock(&lock->lock);
+ BUG_ON(lock->count <= 0);
+ __del_holder(lock, current);
+ --lock->count;
+ if (!list_empty(&lock->waiters))
+ __wake_many(lock);
+ spin_unlock(&lock->lock);
+}
+
+static int bl_down_write(struct block_lock *lock)
+{
+ int r;
+ struct waiter w;
+
+ spin_lock(&lock->lock);
+ r = __check_holder(lock);
+ if (r) {
+ spin_unlock(&lock->lock);
+ return r;
+ }
+
+ if (lock->count == 0 && list_empty(&lock->waiters)) {
+ lock->count = -1;
+ __add_holder(lock, current);
+ spin_unlock(&lock->lock);
+ return 0;
+ }
+
+ get_task_struct(current);
+ w.task = current;
+ w.wants_write = 1;
+
+ /*
+ * Writers given priority. We know there's only one mutator in the
+ * system, so ignoring the ordering reversal.
+ */
+ list_add(&w.list, &lock->waiters);
+ spin_unlock(&lock->lock);
+
+ __wait(&w);
+ put_task_struct(current);
+
+ return 0;
+}
+
+static void bl_up_write(struct block_lock *lock)
+{
+ spin_lock(&lock->lock);
+ __del_holder(lock, current);
+ lock->count = 0;
+ if (!list_empty(&lock->waiters))
+ __wake_many(lock);
+ spin_unlock(&lock->lock);
+}
+
+static void report_recursive_bug(dm_block_t b, int r)
+{
+ if (r == -EINVAL)
+ DMERR("recursive acquisition of block %llu requested.",
+ (unsigned long long) b);
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Block manager is currently implemented using dm-bufio. struct
+ * dm_block_manager and struct dm_block map directly onto a couple of
+ * structs in the bufio interface. I want to retain the freedom to move
+ * away from bufio in the future. So these structs are just cast within
+ * this .c file, rather than making it through to the public interface.
+ */
+static struct dm_buffer *to_buffer(struct dm_block *b)
+{
+ return (struct dm_buffer *) b;
+}
+
+static struct dm_bufio_client *to_bufio(struct dm_block_manager *bm)
+{
+ return (struct dm_bufio_client *) bm;
+}
+
+dm_block_t dm_block_location(struct dm_block *b)
+{
+ return dm_bufio_get_block_number(to_buffer(b));
+}
+EXPORT_SYMBOL_GPL(dm_block_location);
+
+void *dm_block_data(struct dm_block *b)
+{
+ return dm_bufio_get_block_data(to_buffer(b));
+}
+EXPORT_SYMBOL_GPL(dm_block_data);
+
+struct buffer_aux {
+ struct dm_block_validator *validator;
+ struct block_lock lock;
+ int write_locked;
+};
+
+static void dm_block_manager_alloc_callback(struct dm_buffer *buf)
+{
+ struct buffer_aux *aux = dm_bufio_get_aux_data(buf);
+ aux->validator = NULL;
+ bl_init(&aux->lock);
+}
+
+static void dm_block_manager_write_callback(struct dm_buffer *buf)
+{
+ struct buffer_aux *aux = dm_bufio_get_aux_data(buf);
+ if (aux->validator) {
+ aux->validator->prepare_for_write(aux->validator, (struct dm_block *) buf,
+ dm_bufio_get_block_size(dm_bufio_get_client(buf)));
+ }
+}
+
+/*----------------------------------------------------------------
+ * Public interface
+ *--------------------------------------------------------------*/
+struct dm_block_manager *dm_block_manager_create(struct block_device *bdev,
+ unsigned block_size,
+ unsigned cache_size,
+ unsigned max_held_per_thread)
+{
+ return (struct dm_block_manager *)
+ dm_bufio_client_create(bdev, block_size, max_held_per_thread,
+ sizeof(struct buffer_aux),
+ dm_block_manager_alloc_callback,
+ dm_block_manager_write_callback);
+}
+EXPORT_SYMBOL_GPL(dm_block_manager_create);
+
+void dm_block_manager_destroy(struct dm_block_manager *bm)
+{
+ return dm_bufio_client_destroy(to_bufio(bm));
+}
+EXPORT_SYMBOL_GPL(dm_block_manager_destroy);
+
+unsigned dm_bm_block_size(struct dm_block_manager *bm)
+{
+ return dm_bufio_get_block_size(to_bufio(bm));
+}
+EXPORT_SYMBOL_GPL(dm_bm_block_size);
+
+dm_block_t dm_bm_nr_blocks(struct dm_block_manager *bm)
+{
+ return dm_bufio_get_device_size(to_bufio(bm));
+}
+
+static int dm_bm_validate_buffer(struct dm_block_manager *bm,
+ struct dm_buffer *buf,
+ struct buffer_aux *aux,
+ struct dm_block_validator *v)
+{
+ if (unlikely(!aux->validator)) {
+ int r;
+ if (!v)
+ return 0;
+ r = v->check(v, (struct dm_block *) buf, dm_bufio_get_block_size(to_bufio(bm)));
+ if (unlikely(r))
+ return r;
+ aux->validator = v;
+ } else {
+ if (unlikely(aux->validator != v)) {
+ DMERR("validator mismatch (old=%s vs new=%s) for block %llu",
+ aux->validator->name, v ? v->name : "NULL",
+ (unsigned long long)
+ dm_bufio_get_block_number(buf));
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+int dm_bm_read_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ struct buffer_aux *aux;
+ void *p;
+ int r;
+
+ p = dm_bufio_read(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_read(&aux->lock);
+ if (unlikely(r)) {
+ dm_bufio_release(to_buffer(*result));
+ report_recursive_bug(b, r);
+ return r;
+ }
+
+ aux->write_locked = 0;
+
+ r = dm_bm_validate_buffer(bm, to_buffer(*result), aux, v);
+ if (unlikely(r)) {
+ bl_up_read(&aux->lock);
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_bm_read_lock);
+
+int dm_bm_write_lock(struct dm_block_manager *bm,
+ dm_block_t b, struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ struct buffer_aux *aux;
+ void *p;
+ int r;
+
+ p = dm_bufio_read(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_write(&aux->lock);
+ if (r) {
+ dm_bufio_release(to_buffer(*result));
+ report_recursive_bug(b, r);
+ return r;
+ }
+
+ aux->write_locked = 1;
+
+ r = dm_bm_validate_buffer(bm, to_buffer(*result), aux, v);
+ if (unlikely(r)) {
+ bl_up_write(&aux->lock);
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_bm_write_lock);
+
+int dm_bm_read_try_lock(struct dm_block_manager *bm,
+ dm_block_t b, struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ struct buffer_aux *aux;
+ void *p;
+ int r;
+
+ p = dm_bufio_get(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+ if (unlikely(!p))
+ return -EWOULDBLOCK;
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_read_nonblock(&aux->lock);
+ if (r < 0) {
+ dm_bufio_release(to_buffer(*result));
+ report_recursive_bug(b, r);
+ return r;
+ }
+ aux->write_locked = 0;
+
+ r = dm_bm_validate_buffer(bm, to_buffer(*result), aux, v);
+ if (unlikely(r)) {
+ bl_up_read(&aux->lock);
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ return 0;
+}
+
+int dm_bm_write_lock_zero(struct dm_block_manager *bm,
+ dm_block_t b, struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ int r;
+ struct buffer_aux *aux;
+ void *p;
+
+ p = dm_bufio_new(to_bufio(bm), b, (struct dm_buffer **) result);
+ if (unlikely(IS_ERR(p)))
+ return PTR_ERR(p);
+
+ memset(p, 0, dm_bm_block_size(bm));
+
+ aux = dm_bufio_get_aux_data(to_buffer(*result));
+ r = bl_down_write(&aux->lock);
+ if (r) {
+ dm_bufio_release(to_buffer(*result));
+ return r;
+ }
+
+ aux->write_locked = 1;
+ aux->validator = v;
+
+ return 0;
+}
+
+int dm_bm_unlock(struct dm_block *b)
+{
+ struct buffer_aux *aux;
+ aux = dm_bufio_get_aux_data(to_buffer(b));
+
+ if (aux->write_locked) {
+ dm_bufio_mark_buffer_dirty(to_buffer(b));
+ bl_up_write(&aux->lock);
+ } else
+ bl_up_read(&aux->lock);
+
+ dm_bufio_release(to_buffer(b));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_bm_unlock);
+
+int dm_bm_unlock_move(struct dm_block *b, dm_block_t n)
+{
+ struct buffer_aux *aux;
+
+ aux = dm_bufio_get_aux_data(to_buffer(b));
+
+ if (aux->write_locked) {
+ dm_bufio_mark_buffer_dirty(to_buffer(b));
+ bl_up_write(&aux->lock);
+ } else
+ bl_up_read(&aux->lock);
+
+ dm_bufio_release_move(to_buffer(b), n);
+ return 0;
+}
+
+int dm_bm_flush_and_unlock(struct dm_block_manager *bm,
+ struct dm_block *superblock)
+{
+ int r;
+
+ r = dm_bufio_write_dirty_buffers(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+ r = dm_bufio_issue_flush(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+
+ dm_bm_unlock(superblock);
+
+ r = dm_bufio_write_dirty_buffers(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+ r = dm_bufio_issue_flush(to_bufio(bm));
+ if (unlikely(r))
+ return r;
+
+ return 0;
+}
+
+u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor)
+{
+ return crc32c(~(u32) 0, data, len) ^ init_xor;
+}
+EXPORT_SYMBOL_GPL(dm_bm_checksum);
+
+/*----------------------------------------------------------------*/
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Joe Thornber <dm-devel@redhat.com>");
+MODULE_DESCRIPTION("Immutable metadata library for dm");
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-block-manager.h b/drivers/md/persistent-data/dm-block-manager.h
new file mode 100644
index 0000000..924833d
--- /dev/null
+++ b/drivers/md/persistent-data/dm-block-manager.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_BLOCK_MANAGER_H
+#define _LINUX_DM_BLOCK_MANAGER_H
+
+#include <linux/types.h>
+#include <linux/blkdev.h>
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Block number.
+ */
+typedef uint64_t dm_block_t;
+struct dm_block;
+
+dm_block_t dm_block_location(struct dm_block *b);
+void *dm_block_data(struct dm_block *b);
+
+/*----------------------------------------------------------------*/
+
+/*
+ * @name should be a unique identifier for the block manager, no longer
+ * than 32 chars.
+ *
+ * @max_held_per_thread should be the maximum number of locks, read or
+ * write, that an individual thread holds at any one time.
+ */
+struct dm_block_manager;
+struct dm_block_manager *dm_block_manager_create(
+ struct block_device *bdev, unsigned block_size,
+ unsigned cache_size, unsigned max_held_per_thread);
+void dm_block_manager_destroy(struct dm_block_manager *bm);
+
+unsigned dm_bm_block_size(struct dm_block_manager *bm);
+dm_block_t dm_bm_nr_blocks(struct dm_block_manager *bm);
+
+/*----------------------------------------------------------------*/
+
+/*
+ * The validator allows the caller to verify newly-read data and modify
+ * the data just before writing, e.g. to calculate checksums. It's
+ * important to be consistent with your use of validators. The only time
+ * you can change validators is if you call dm_bm_write_lock_zero.
+ */
+struct dm_block_validator {
+ const char *name;
+ void (*prepare_for_write)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
+
+ /*
+ * Return 0 if the checksum is valid or < 0 on error.
+ */
+ int (*check)(struct dm_block_validator *v, struct dm_block *b, size_t block_size);
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * You can have multiple concurrent readers or a single writer holding a
+ * block lock.
+ */
+
+/*
+ * dm_bm_lock() locks a block and returns through @result a pointer to
+ * memory that holds a copy of that block. If you have write-locked the
+ * block then any changes you make to memory pointed to by @result will be
+ * written back to the disk sometime after dm_bm_unlock is called.
+ */
+int dm_bm_read_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+int dm_bm_write_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+/*
+ * The *_try_lock variants return -EWOULDBLOCK if the block isn't
+ * available immediately.
+ */
+int dm_bm_read_try_lock(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+/*
+ * Use dm_bm_write_lock_zero() when you know you're going to
+ * overwrite the block completely. It saves a disk read.
+ */
+int dm_bm_write_lock_zero(struct dm_block_manager *bm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+int dm_bm_unlock(struct dm_block *b);
+
+/*
+ * An optimisation; we often want to copy a block's contents to a new
+ * block. eg, as part of the shadowing operation. It's far better for
+ * bufio to do this move behind the scenes than hold 2 locks and memcpy the
+ * data.
+ */
+int dm_bm_unlock_move(struct dm_block *b, dm_block_t n);
+
+/*
+ * It's a common idiom to have a superblock that should be committed last.
+ *
+ * @superblock should be write-locked on entry. It will be unlocked during
+ * this function. All dirty blocks are guaranteed to be written and flushed
+ * before the superblock.
+ *
+ * This method always blocks.
+ */
+int dm_bm_flush_and_unlock(struct dm_block_manager *bm,
+ struct dm_block *superblock);
+
+u32 dm_bm_checksum(const void *data, size_t len, u32 init_xor);
+
+/*----------------------------------------------------------------*/
+
+#endif /* _LINUX_DM_BLOCK_MANAGER_H */
diff --git a/drivers/md/persistent-data/dm-btree-internal.h b/drivers/md/persistent-data/dm-btree-internal.h
new file mode 100644
index 0000000..d279c76
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree-internal.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_BTREE_INTERNAL_H
+#define DM_BTREE_INTERNAL_H
+
+#include "dm-btree.h"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * We'll need 2 accessor functions for n->csum and n->blocknr
+ * to support dm-btree-spine.c in that case.
+ */
+
+enum node_flags {
+ INTERNAL_NODE = 1,
+ LEAF_NODE = 1 << 1
+};
+
+/*
+ * Every btree node begins with this structure. Make sure it's a multiple
+ * of 8-bytes in size, otherwise the 64bit keys will be mis-aligned.
+ */
+struct node_header {
+ __le32 csum;
+ __le32 flags;
+ __le64 blocknr; /* Block this node is supposed to live in. */
+
+ __le32 nr_entries;
+ __le32 max_entries;
+ __le32 value_size;
+ __le32 padding;
+} __packed;
+
+struct node {
+ struct node_header header;
+ __le64 keys[0];
+} __packed;
+
+
+void inc_children(struct dm_transaction_manager *tm, struct node *n,
+ struct dm_btree_value_type *vt);
+
+int new_block(struct dm_btree_info *info, struct dm_block **result);
+int unlock_block(struct dm_btree_info *info, struct dm_block *b);
+
+/*
+ * Spines keep track of the rolling locks. There are 2 variants, read-only
+ * and one that uses shadowing. These are separate structs to allow the
+ * type checker to spot misuse, for example accidentally calling read_lock
+ * on a shadow spine.
+ */
+struct ro_spine {
+ struct dm_btree_info *info;
+
+ int count;
+ struct dm_block *nodes[2];
+};
+
+void init_ro_spine(struct ro_spine *s, struct dm_btree_info *info);
+int exit_ro_spine(struct ro_spine *s);
+int ro_step(struct ro_spine *s, dm_block_t new_child);
+struct node *ro_node(struct ro_spine *s);
+
+struct shadow_spine {
+ struct dm_btree_info *info;
+
+ int count;
+ struct dm_block *nodes[2];
+
+ dm_block_t root;
+};
+
+void init_shadow_spine(struct shadow_spine *s, struct dm_btree_info *info);
+int exit_shadow_spine(struct shadow_spine *s);
+
+int shadow_step(struct shadow_spine *s, dm_block_t b,
+ struct dm_btree_value_type *vt);
+
+/*
+ * The spine must have at least one entry before calling this.
+ */
+struct dm_block *shadow_current(struct shadow_spine *s);
+
+/*
+ * The spine must have at least two entries before calling this.
+ */
+struct dm_block *shadow_parent(struct shadow_spine *s);
+
+int shadow_has_parent(struct shadow_spine *s);
+
+int shadow_root(struct shadow_spine *s);
+
+/*
+ * Some inlines.
+ */
+static inline __le64 *key_ptr(struct node *n, uint32_t index)
+{
+ return n->keys + index;
+}
+
+static inline void *value_base(struct node *n)
+{
+ return &n->keys[le32_to_cpu(n->header.max_entries)];
+}
+
+/*
+ * FIXME: Now that value size is stored in node we don't need the third parm.
+ */
+static inline void *value_ptr(struct node *n, uint32_t index, size_t value_size)
+{
+ BUG_ON(value_size != le32_to_cpu(n->header.value_size));
+ return value_base(n) + (value_size * index);
+}
+
+/*
+ * Assumes the values are suitably-aligned and converts to core format.
+ */
+static inline uint64_t value64(struct node *n, uint32_t index)
+{
+ __le64 *values_le = value_base(n);
+
+ return le64_to_cpu(values_le[index]);
+}
+
+/*
+ * Searching for a key within a single node.
+ */
+int lower_bound(struct node *n, uint64_t key);
+
+extern struct dm_block_validator btree_node_validator;
+
+#endif /* DM_BTREE_INTERNAL_H */
diff --git a/drivers/md/persistent-data/dm-btree-remove.c b/drivers/md/persistent-data/dm-btree-remove.c
new file mode 100644
index 0000000..65fd85e
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree-remove.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-btree.h"
+#include "dm-btree-internal.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/module.h>
+
+/*
+ * Removing an entry from a btree
+ * ==============================
+ *
+ * A very important constraint for our btree is that no node, except the
+ * root, may have fewer than a certain number of entries.
+ * (MIN_ENTRIES <= nr_entries <= MAX_ENTRIES).
+ *
+ * Ensuring this is complicated by the way we want to only ever hold the
+ * locks on 2 nodes concurrently, and only change nodes in a top to bottom
+ * fashion.
+ *
+ * Each node may have a left or right sibling. When decending the spine,
+ * if a node contains only MIN_ENTRIES then we try and increase this to at
+ * least MIN_ENTRIES + 1. We do this in the following ways:
+ *
+ * [A] No siblings => this can only happen if the node is the root, in which
+ * case we copy the childs contents over the root.
+ *
+ * [B] No left sibling
+ * ==> rebalance(node, right sibling)
+ *
+ * [C] No right sibling
+ * ==> rebalance(left sibling, node)
+ *
+ * [D] Both siblings, total_entries(left, node, right) <= DEL_THRESHOLD
+ * ==> delete node adding it's contents to left and right
+ *
+ * [E] Both siblings, total_entries(left, node, right) > DEL_THRESHOLD
+ * ==> rebalance(left, node, right)
+ *
+ * After these operations it's possible that the our original node no
+ * longer contains the desired sub tree. For this reason this rebalancing
+ * is performed on the children of the current node. This also avoids
+ * having a special case for the root.
+ *
+ * Once this rebalancing has occurred we can then step into the child node
+ * for internal nodes. Or delete the entry for leaf nodes.
+ */
+
+/*
+ * Some little utilities for moving node data around.
+ */
+static void node_shift(struct node *n, int shift)
+{
+ uint32_t nr_entries = le32_to_cpu(n->header.nr_entries);
+ uint32_t value_size = le32_to_cpu(n->header.value_size);
+
+ if (shift < 0) {
+ shift = -shift;
+ BUG_ON(shift > nr_entries);
+ BUG_ON((void *) key_ptr(n, shift) >= value_ptr(n, shift, value_size));
+ memmove(key_ptr(n, 0),
+ key_ptr(n, shift),
+ (nr_entries - shift) * sizeof(__le64));
+ memmove(value_ptr(n, 0, value_size),
+ value_ptr(n, shift, value_size),
+ (nr_entries - shift) * value_size);
+ } else {
+ BUG_ON(nr_entries + shift > le32_to_cpu(n->header.max_entries));
+ memmove(key_ptr(n, shift),
+ key_ptr(n, 0),
+ nr_entries * sizeof(__le64));
+ memmove(value_ptr(n, shift, value_size),
+ value_ptr(n, 0, value_size),
+ nr_entries * value_size);
+ }
+}
+
+static void node_copy(struct node *left, struct node *right, int shift)
+{
+ uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
+ uint32_t value_size = le32_to_cpu(left->header.value_size);
+ BUG_ON(value_size != le32_to_cpu(right->header.value_size));
+
+ if (shift < 0) {
+ shift = -shift;
+ BUG_ON(nr_left + shift > le32_to_cpu(left->header.max_entries));
+ memcpy(key_ptr(left, nr_left),
+ key_ptr(right, 0),
+ shift * sizeof(__le64));
+ memcpy(value_ptr(left, nr_left, value_size),
+ value_ptr(right, 0, value_size),
+ shift * value_size);
+ } else {
+ BUG_ON(shift > le32_to_cpu(right->header.max_entries));
+ memcpy(key_ptr(right, 0),
+ key_ptr(left, nr_left - shift),
+ shift * sizeof(__le64));
+ memcpy(value_ptr(right, 0, value_size),
+ value_ptr(left, nr_left - shift, value_size),
+ shift * value_size);
+ }
+}
+
+/*
+ * Delete a specific entry from a leaf node.
+ */
+static void delete_at(struct node *n, unsigned index)
+{
+ unsigned nr_entries = le32_to_cpu(n->header.nr_entries);
+ unsigned nr_to_copy = nr_entries - (index + 1);
+ uint32_t value_size = le32_to_cpu(n->header.value_size);
+ BUG_ON(index >= nr_entries);
+
+ if (nr_to_copy) {
+ memmove(key_ptr(n, index),
+ key_ptr(n, index + 1),
+ nr_to_copy * sizeof(__le64));
+
+ memmove(value_ptr(n, index, value_size),
+ value_ptr(n, index + 1, value_size),
+ nr_to_copy * value_size);
+ }
+
+ n->header.nr_entries = cpu_to_le32(nr_entries - 1);
+}
+
+static unsigned del_threshold(struct node *n)
+{
+ return le32_to_cpu(n->header.max_entries) / 3;
+}
+
+static unsigned merge_threshold(struct node *n)
+{
+ /*
+ * The extra one is because we know we're potentially going to
+ * delete an entry.
+ */
+ return 2 * (le32_to_cpu(n->header.max_entries) / 3) + 1;
+}
+
+struct child {
+ unsigned index;
+ struct dm_block *block;
+ struct node *n;
+};
+
+static struct dm_btree_value_type le64_type = {
+ .context = NULL,
+ .size = sizeof(__le64),
+ .inc = NULL,
+ .dec = NULL,
+ .equal = NULL
+};
+
+static int init_child(struct dm_btree_info *info, struct node *parent,
+ unsigned index, struct child *result)
+{
+ int r, inc;
+ dm_block_t root;
+
+ result->index = index;
+ root = value64(parent, index);
+
+ r = dm_tm_shadow_block(info->tm, root, &btree_node_validator,
+ &result->block, &inc);
+ if (r)
+ return r;
+
+ result->n = dm_block_data(result->block);
+
+ if (inc)
+ inc_children(info->tm, result->n, &le64_type);
+
+ *((__le64 *) value_ptr(parent, index, sizeof(__le64))) =
+ cpu_to_le64(dm_block_location(result->block));
+
+ return 0;
+}
+
+static int exit_child(struct dm_btree_info *info, struct child *c)
+{
+ return dm_tm_unlock(info->tm, c->block);
+}
+
+static void shift(struct node *left, struct node *right, int count)
+{
+ if (!count)
+ return;
+
+ if (count > 0) {
+ node_shift(right, count);
+ node_copy(left, right, count);
+ } else {
+ node_copy(left, right, count);
+ node_shift(right, count);
+ }
+
+ left->header.nr_entries =
+ cpu_to_le32(le32_to_cpu(left->header.nr_entries) - count);
+ BUG_ON(le32_to_cpu(left->header.nr_entries) > le32_to_cpu(left->header.max_entries));
+
+ right->header.nr_entries =
+ cpu_to_le32(le32_to_cpu(right->header.nr_entries) + count);
+ BUG_ON(le32_to_cpu(right->header.nr_entries) > le32_to_cpu(right->header.max_entries));
+}
+
+static void __rebalance2(struct dm_btree_info *info, struct node *parent,
+ struct child *l, struct child *r)
+{
+ struct node *left = l->n;
+ struct node *right = r->n;
+ uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
+ uint32_t nr_right = le32_to_cpu(right->header.nr_entries);
+
+ if (nr_left + nr_right <= merge_threshold(left)) {
+ /*
+ * Merge
+ */
+ node_copy(left, right, -nr_right);
+ left->header.nr_entries = cpu_to_le32(nr_left + nr_right);
+ delete_at(parent, r->index);
+
+ /*
+ * We need to decrement the right block, but not it's
+ * children, since they're still referenced by left.
+ */
+ dm_tm_dec(info->tm, dm_block_location(r->block));
+ } else {
+ /*
+ * Rebalance.
+ */
+ unsigned target_left = (nr_left + nr_right) / 2;
+ unsigned shift_ = nr_left - target_left;
+ BUG_ON(le32_to_cpu(left->header.max_entries) <= nr_left - shift_);
+ BUG_ON(le32_to_cpu(right->header.max_entries) <= nr_right + shift_);
+ shift(left, right, nr_left - target_left);
+ *key_ptr(parent, r->index) = right->keys[0];
+ }
+}
+
+static int rebalance2(struct shadow_spine *s, struct dm_btree_info *info,
+ unsigned left_index)
+{
+ int r;
+ struct node *parent;
+ struct child left, right;
+
+ parent = dm_block_data(shadow_current(s));
+
+ r = init_child(info, parent, left_index, &left);
+ if (r)
+ return r;
+
+ r = init_child(info, parent, left_index + 1, &right);
+ if (r) {
+ exit_child(info, &left);
+ return r;
+ }
+
+ __rebalance2(info, parent, &left, &right);
+
+ r = exit_child(info, &left);
+ if (r) {
+ exit_child(info, &right);
+ return r;
+ }
+
+ return exit_child(info, &right);
+}
+
+static void __rebalance3(struct dm_btree_info *info, struct node *parent,
+ struct child *l, struct child *c, struct child *r)
+{
+ struct node *left = l->n;
+ struct node *center = c->n;
+ struct node *right = r->n;
+
+ uint32_t nr_left = le32_to_cpu(left->header.nr_entries);
+ uint32_t nr_center = le32_to_cpu(center->header.nr_entries);
+ uint32_t nr_right = le32_to_cpu(right->header.nr_entries);
+ uint32_t max_entries = le32_to_cpu(left->header.max_entries);
+
+ unsigned target;
+
+ BUG_ON(left->header.max_entries != center->header.max_entries);
+ BUG_ON(center->header.max_entries != right->header.max_entries);
+
+ if (((nr_left + nr_center + nr_right) / 2) < merge_threshold(center)) {
+ /*
+ * Delete center node:
+ *
+ * We dump as many entries from center as possible into
+ * left, then the rest in right, then rebalance2. This
+ * wastes some cpu, but I want something simple atm.
+ */
+ unsigned shift = min(max_entries - nr_left, nr_center);
+
+ BUG_ON(nr_left + shift > max_entries);
+ node_copy(left, center, -shift);
+ left->header.nr_entries = cpu_to_le32(nr_left + shift);
+
+ if (shift != nr_center) {
+ shift = nr_center - shift;
+ BUG_ON((nr_right + shift) >= max_entries);
+ node_shift(right, shift);
+ node_copy(center, right, shift);
+ right->header.nr_entries = cpu_to_le32(nr_right + shift);
+ }
+ *key_ptr(parent, r->index) = right->keys[0];
+
+ delete_at(parent, c->index);
+ r->index--;
+
+ dm_tm_dec(info->tm, dm_block_location(c->block));
+ __rebalance2(info, parent, l, r);
+
+ return;
+ }
+
+ /*
+ * Rebalance
+ */
+ target = (nr_left + nr_center + nr_right) / 3;
+ BUG_ON(target > max_entries);
+
+ /*
+ * Adjust the left node
+ */
+ shift(left, center, nr_left - target);
+
+ /*
+ * Adjust the right node
+ */
+ shift(center, right, target - nr_right);
+ *key_ptr(parent, c->index) = center->keys[0];
+ *key_ptr(parent, r->index) = right->keys[0];
+}
+
+static int rebalance3(struct shadow_spine *s, struct dm_btree_info *info,
+ unsigned left_index)
+{
+ int r;
+ struct node *parent = dm_block_data(shadow_current(s));
+ struct child left, center, right;
+
+ /*
+ * FIXME: fill out an array?
+ */
+ r = init_child(info, parent, left_index, &left);
+ if (r)
+ return r;
+
+ r = init_child(info, parent, left_index + 1, ¢er);
+ if (r) {
+ exit_child(info, &left);
+ return r;
+ }
+
+ r = init_child(info, parent, left_index + 2, &right);
+ if (r) {
+ exit_child(info, &left);
+ exit_child(info, ¢er);
+ return r;
+ }
+
+ __rebalance3(info, parent, &left, ¢er, &right);
+
+ r = exit_child(info, &left);
+ if (r) {
+ exit_child(info, ¢er);
+ exit_child(info, &right);
+ return r;
+ }
+
+ r = exit_child(info, ¢er);
+ if (r) {
+ exit_child(info, &right);
+ return r;
+ }
+
+ r = exit_child(info, &right);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int get_nr_entries(struct dm_transaction_manager *tm,
+ dm_block_t b, uint32_t *result)
+{
+ int r;
+ struct dm_block *block;
+ struct node *n;
+
+ r = dm_tm_read_lock(tm, b, &btree_node_validator, &block);
+ if (r)
+ return r;
+
+ n = dm_block_data(block);
+ *result = le32_to_cpu(n->header.nr_entries);
+
+ return dm_tm_unlock(tm, block);
+}
+
+static int rebalance_children(struct shadow_spine *s,
+ struct dm_btree_info *info, uint64_t key)
+{
+ int i, r, has_left_sibling, has_right_sibling;
+ uint32_t child_entries;
+ struct node *n;
+
+ n = dm_block_data(shadow_current(s));
+
+ if (le32_to_cpu(n->header.nr_entries) == 1) {
+ struct dm_block *child;
+ dm_block_t b = value64(n, 0);
+
+ r = dm_tm_read_lock(info->tm, b, &btree_node_validator, &child);
+ if (r)
+ return r;
+
+ memcpy(n, dm_block_data(child),
+ dm_bm_block_size(dm_tm_get_bm(info->tm)));
+ r = dm_tm_unlock(info->tm, child);
+ if (r)
+ return r;
+
+ dm_tm_dec(info->tm, dm_block_location(child));
+ return 0;
+ }
+
+ i = lower_bound(n, key);
+ if (i < 0)
+ return -ENODATA;
+
+ r = get_nr_entries(info->tm, value64(n, i), &child_entries);
+ if (r)
+ return r;
+
+ if (child_entries > del_threshold(n))
+ return 0;
+
+ has_left_sibling = i > 0;
+ has_right_sibling = i < (le32_to_cpu(n->header.nr_entries) - 1);
+
+ if (!has_left_sibling)
+ r = rebalance2(s, info, i);
+
+ else if (!has_right_sibling)
+ r = rebalance2(s, info, i - 1);
+
+ else
+ r = rebalance3(s, info, i - 1);
+
+ return r;
+}
+
+static int do_leaf(struct node *n, uint64_t key, unsigned *index)
+{
+ int i = lower_bound(n, key);
+
+ if ((i < 0) ||
+ (i >= le32_to_cpu(n->header.nr_entries)) ||
+ (le64_to_cpu(n->keys[i]) != key))
+ return -ENODATA;
+
+ *index = i;
+
+ return 0;
+}
+
+/*
+ * Prepares for removal from one level of the hierarchy. The caller must
+ * call delete_at() to remove the entry at index.
+ */
+static int remove_raw(struct shadow_spine *s, struct dm_btree_info *info,
+ struct dm_btree_value_type *vt, dm_block_t root,
+ uint64_t key, unsigned *index)
+{
+ int i = *index, r;
+ struct node *n;
+
+ for (;;) {
+ r = shadow_step(s, root, vt);
+ if (r < 0)
+ break;
+
+ /*
+ * We have to patch up the parent node, ugly, but I don't
+ * see a way to do this automatically as part of the spine
+ * op.
+ */
+ if (shadow_has_parent(s)) {
+ __le64 location = cpu_to_le64(dm_block_location(shadow_current(s)));
+ memcpy(value_ptr(dm_block_data(shadow_parent(s)), i, sizeof(__le64)),
+ &location, sizeof(__le64));
+ }
+
+ n = dm_block_data(shadow_current(s));
+
+ if (le32_to_cpu(n->header.flags) & LEAF_NODE)
+ return do_leaf(n, key, index);
+
+ r = rebalance_children(s, info, key);
+ if (r)
+ break;
+
+ n = dm_block_data(shadow_current(s));
+ if (le32_to_cpu(n->header.flags) & LEAF_NODE)
+ return do_leaf(n, key, index);
+
+ i = lower_bound(n, key);
+
+ /*
+ * We know the key is present, or else
+ * rebalance_children would have returned
+ * -ENODATA
+ */
+ root = value64(n, i);
+ }
+
+ return r;
+}
+
+int dm_btree_remove(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, dm_block_t *new_root)
+{
+ unsigned level, last_level = info->levels - 1;
+ int index = 0, r = 0;
+ struct shadow_spine spine;
+ struct node *n;
+
+ init_shadow_spine(&spine, info);
+ for (level = 0; level < info->levels; level++) {
+ r = remove_raw(&spine, info,
+ (level == last_level ?
+ &info->value_type : &le64_type),
+ root, keys[level], (unsigned *)&index);
+ if (r < 0)
+ break;
+
+ n = dm_block_data(shadow_current(&spine));
+ if (level != last_level) {
+ root = value64(n, index);
+ continue;
+ }
+
+ BUG_ON(index < 0 || index >= le32_to_cpu(n->header.nr_entries));
+
+ if (info->value_type.dec)
+ info->value_type.dec(info->value_type.context,
+ value_ptr(n, index, info->value_type.size));
+
+ delete_at(n, index);
+ }
+
+ *new_root = shadow_root(&spine);
+ exit_shadow_spine(&spine);
+
+ return r;
+}
+EXPORT_SYMBOL_GPL(dm_btree_remove);
diff --git a/drivers/md/persistent-data/dm-btree-spine.c b/drivers/md/persistent-data/dm-btree-spine.c
new file mode 100644
index 0000000..d9a7912
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree-spine.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-btree-internal.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "btree spine"
+
+/*----------------------------------------------------------------*/
+
+#define BTREE_CSUM_XOR 121107
+
+static int node_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size);
+
+static void node_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct node *n = dm_block_data(b);
+ struct node_header *h = &n->header;
+
+ h->blocknr = cpu_to_le64(dm_block_location(b));
+ h->csum = cpu_to_le32(dm_bm_checksum(&h->flags,
+ block_size - sizeof(__le32),
+ BTREE_CSUM_XOR));
+
+ BUG_ON(node_check(v, b, 4096));
+}
+
+static int node_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct node *n = dm_block_data(b);
+ struct node_header *h = &n->header;
+ size_t value_size;
+ __le32 csum_disk;
+ uint32_t flags;
+
+ if (dm_block_location(b) != le64_to_cpu(h->blocknr)) {
+ DMERR("node_check failed blocknr %llu wanted %llu",
+ le64_to_cpu(h->blocknr), dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ csum_disk = cpu_to_le32(dm_bm_checksum(&h->flags,
+ block_size - sizeof(__le32),
+ BTREE_CSUM_XOR));
+ if (csum_disk != h->csum) {
+ DMERR("node_check failed csum %u wanted %u",
+ le32_to_cpu(csum_disk), le32_to_cpu(h->csum));
+ return -EILSEQ;
+ }
+
+ value_size = le32_to_cpu(h->value_size);
+
+ if (sizeof(struct node_header) +
+ (sizeof(__le64) + value_size) * le32_to_cpu(h->max_entries) > block_size) {
+ DMERR("node_check failed: max_entries too large");
+ return -EILSEQ;
+ }
+
+ if (le32_to_cpu(h->nr_entries) > le32_to_cpu(h->max_entries)) {
+ DMERR("node_check failed, too many entries");
+ return -EILSEQ;
+ }
+
+ /*
+ * The node must be either INTERNAL or LEAF.
+ */
+ flags = le32_to_cpu(h->flags);
+ if (!(flags & INTERNAL_NODE) && !(flags & LEAF_NODE)) {
+ DMERR("node_check failed, node is neither INTERNAL or LEAF");
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+struct dm_block_validator btree_node_validator = {
+ .name = "btree_node",
+ .prepare_for_write = node_prepare_for_write,
+ .check = node_check
+};
+
+/*----------------------------------------------------------------*/
+
+static int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
+ struct dm_block **result)
+{
+ return dm_tm_read_lock(info->tm, b, &btree_node_validator, result);
+}
+
+static int bn_shadow(struct dm_btree_info *info, dm_block_t orig,
+ struct dm_btree_value_type *vt,
+ struct dm_block **result)
+{
+ int r, inc;
+
+ r = dm_tm_shadow_block(info->tm, orig, &btree_node_validator,
+ result, &inc);
+ if (!r && inc)
+ inc_children(info->tm, dm_block_data(*result), vt);
+
+ return r;
+}
+
+int new_block(struct dm_btree_info *info, struct dm_block **result)
+{
+ return dm_tm_new_block(info->tm, &btree_node_validator, result);
+}
+
+int unlock_block(struct dm_btree_info *info, struct dm_block *b)
+{
+ return dm_tm_unlock(info->tm, b);
+}
+
+/*----------------------------------------------------------------*/
+
+void init_ro_spine(struct ro_spine *s, struct dm_btree_info *info)
+{
+ s->info = info;
+ s->count = 0;
+ s->nodes[0] = NULL;
+ s->nodes[1] = NULL;
+}
+
+int exit_ro_spine(struct ro_spine *s)
+{
+ int r = 0, i;
+
+ for (i = 0; i < s->count; i++) {
+ int r2 = unlock_block(s->info, s->nodes[i]);
+ if (r2 < 0)
+ r = r2;
+ }
+
+ return r;
+}
+
+int ro_step(struct ro_spine *s, dm_block_t new_child)
+{
+ int r;
+
+ if (s->count == 2) {
+ r = unlock_block(s->info, s->nodes[0]);
+ if (r < 0)
+ return r;
+ s->nodes[0] = s->nodes[1];
+ s->count--;
+ }
+
+ r = bn_read_lock(s->info, new_child, s->nodes + s->count);
+ if (!r)
+ s->count++;
+
+ return r;
+}
+
+struct node *ro_node(struct ro_spine *s)
+{
+ struct dm_block *block;
+
+ BUG_ON(!s->count);
+ block = s->nodes[s->count - 1];
+
+ return dm_block_data(block);
+}
+
+/*----------------------------------------------------------------*/
+
+void init_shadow_spine(struct shadow_spine *s, struct dm_btree_info *info)
+{
+ s->info = info;
+ s->count = 0;
+}
+
+int exit_shadow_spine(struct shadow_spine *s)
+{
+ int r = 0, i;
+
+ for (i = 0; i < s->count; i++) {
+ int r2 = unlock_block(s->info, s->nodes[i]);
+ if (r2 < 0)
+ r = r2;
+ }
+
+ return r;
+}
+
+int shadow_step(struct shadow_spine *s, dm_block_t b,
+ struct dm_btree_value_type *vt)
+{
+ int r;
+
+ if (s->count == 2) {
+ r = unlock_block(s->info, s->nodes[0]);
+ if (r < 0)
+ return r;
+ s->nodes[0] = s->nodes[1];
+ s->count--;
+ }
+
+ r = bn_shadow(s->info, b, vt, s->nodes + s->count);
+ if (!r) {
+ if (!s->count)
+ s->root = dm_block_location(s->nodes[0]);
+
+ s->count++;
+ }
+
+ return r;
+}
+
+struct dm_block *shadow_current(struct shadow_spine *s)
+{
+ BUG_ON(!s->count);
+
+ return s->nodes[s->count - 1];
+}
+
+struct dm_block *shadow_parent(struct shadow_spine *s)
+{
+ BUG_ON(s->count != 2);
+
+ return s->count == 2 ? s->nodes[0] : NULL;
+}
+
+int shadow_has_parent(struct shadow_spine *s)
+{
+ return s->count >= 2;
+}
+
+int shadow_root(struct shadow_spine *s)
+{
+ return s->root;
+}
diff --git a/drivers/md/persistent-data/dm-btree.c b/drivers/md/persistent-data/dm-btree.c
new file mode 100644
index 0000000..e0638be
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree.c
@@ -0,0 +1,805 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-btree-internal.h"
+#include "dm-space-map.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/module.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "btree"
+
+/*----------------------------------------------------------------
+ * Array manipulation
+ *--------------------------------------------------------------*/
+static void memcpy_disk(void *dest, const void *src, size_t len)
+ __dm_written_to_disk(src)
+{
+ memcpy(dest, src, len);
+ __dm_unbless_for_disk(src);
+}
+
+static void array_insert(void *base, size_t elt_size, unsigned nr_elts,
+ unsigned index, void *elt)
+ __dm_written_to_disk(elt)
+{
+ if (index < nr_elts)
+ memmove(base + (elt_size * (index + 1)),
+ base + (elt_size * index),
+ (nr_elts - index) * elt_size);
+
+ memcpy_disk(base + (elt_size * index), elt, elt_size);
+}
+
+/*----------------------------------------------------------------*/
+
+/* makes the assumption that no two keys are the same. */
+static int bsearch(struct node *n, uint64_t key, int want_hi)
+{
+ int lo = -1, hi = le32_to_cpu(n->header.nr_entries);
+
+ while (hi - lo > 1) {
+ int mid = lo + ((hi - lo) / 2);
+ uint64_t mid_key = le64_to_cpu(n->keys[mid]);
+
+ if (mid_key == key)
+ return mid;
+
+ if (mid_key < key)
+ lo = mid;
+ else
+ hi = mid;
+ }
+
+ return want_hi ? hi : lo;
+}
+
+int lower_bound(struct node *n, uint64_t key)
+{
+ return bsearch(n, key, 0);
+}
+
+void inc_children(struct dm_transaction_manager *tm, struct node *n,
+ struct dm_btree_value_type *vt)
+{
+ unsigned i;
+ uint32_t nr_entries = le32_to_cpu(n->header.nr_entries);
+
+ if (le32_to_cpu(n->header.flags) & INTERNAL_NODE)
+ for (i = 0; i < nr_entries; i++)
+ dm_tm_inc(tm, value64(n, i));
+ else if (vt->inc)
+ for (i = 0; i < nr_entries; i++)
+ vt->inc(vt->context,
+ value_ptr(n, i, vt->size));
+}
+
+static int insert_at(size_t value_size, struct node *node, unsigned index,
+ uint64_t key, void *value)
+ __dm_written_to_disk(value)
+{
+ uint32_t nr_entries = le32_to_cpu(node->header.nr_entries);
+ __le64 key_le = cpu_to_le64(key);
+
+ if (index > nr_entries ||
+ index >= le32_to_cpu(node->header.max_entries)) {
+ DMERR("too many entries in btree node for insert");
+ __dm_unbless_for_disk(value);
+ return -ENOMEM;
+ }
+
+ __dm_bless_for_disk(&key_le);
+
+ array_insert(node->keys, sizeof(*node->keys), nr_entries, index, &key_le);
+ array_insert(value_base(node), value_size, nr_entries, index, value);
+ node->header.nr_entries = cpu_to_le32(nr_entries + 1);
+
+ return 0;
+}
+
+/*----------------------------------------------------------------*/
+
+/*
+ * We want 3n entries (for some n). This works more nicely for repeated
+ * insert remove loops than (2n + 1).
+ */
+static uint32_t calc_max_entries(size_t value_size, size_t block_size)
+{
+ uint32_t total, n;
+ size_t elt_size = sizeof(uint64_t) + value_size; /* key + value */
+
+ block_size -= sizeof(struct node_header);
+ total = block_size / elt_size;
+ n = total / 3; /* rounds down */
+
+ return 3 * n;
+}
+
+int dm_btree_empty(struct dm_btree_info *info, dm_block_t *root)
+{
+ int r;
+ struct dm_block *b;
+ struct node *n;
+ size_t block_size;
+ uint32_t max_entries;
+
+ r = new_block(info, &b);
+ if (r < 0)
+ return r;
+
+ block_size = dm_bm_block_size(dm_tm_get_bm(info->tm));
+ max_entries = calc_max_entries(info->value_type.size, block_size);
+
+ n = dm_block_data(b);
+ memset(n, 0, block_size);
+ n->header.flags = cpu_to_le32(LEAF_NODE);
+ n->header.nr_entries = cpu_to_le32(0);
+ n->header.max_entries = cpu_to_le32(max_entries);
+ n->header.value_size = cpu_to_le32(info->value_type.size);
+
+ *root = dm_block_location(b);
+ return unlock_block(info, b);
+}
+EXPORT_SYMBOL_GPL(dm_btree_empty);
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Deletion uses a recursive algorithm, since we have limited stack space
+ * we explicitly manage our own stack on the heap.
+ */
+#define MAX_SPINE_DEPTH 64
+struct frame {
+ struct dm_block *b;
+ struct node *n;
+ unsigned level;
+ unsigned nr_children;
+ unsigned current_child;
+};
+
+struct del_stack {
+ struct dm_transaction_manager *tm;
+ int top;
+ struct frame spine[MAX_SPINE_DEPTH];
+};
+
+static int top_frame(struct del_stack *s, struct frame **f)
+{
+ if (s->top < 0) {
+ DMERR("btree deletion stack empty");
+ return -EINVAL;
+ }
+
+ *f = s->spine + s->top;
+
+ return 0;
+}
+
+static int unprocessed_frames(struct del_stack *s)
+{
+ return s->top >= 0;
+}
+
+static int push_frame(struct del_stack *s, dm_block_t b, unsigned level)
+{
+ int r;
+ uint32_t ref_count;
+
+ if (s->top >= MAX_SPINE_DEPTH - 1) {
+ DMERR("btree deletion stack out of memory");
+ return -ENOMEM;
+ }
+
+ r = dm_tm_ref(s->tm, b, &ref_count);
+ if (r)
+ return r;
+
+ if (ref_count > 1)
+ /*
+ * This is a shared node, so we can just decrement it's
+ * reference counter and leave the children.
+ */
+ dm_tm_dec(s->tm, b);
+
+ else {
+ struct frame *f = s->spine + ++s->top;
+
+ r = dm_tm_read_lock(s->tm, b, &btree_node_validator, &f->b);
+ if (r) {
+ s->top--;
+ return r;
+ }
+
+ f->n = dm_block_data(f->b);
+ f->level = level;
+ f->nr_children = le32_to_cpu(f->n->header.nr_entries);
+ f->current_child = 0;
+ }
+
+ return 0;
+}
+
+static void pop_frame(struct del_stack *s)
+{
+ struct frame *f = s->spine + s->top--;
+
+ dm_tm_dec(s->tm, dm_block_location(f->b));
+ dm_tm_unlock(s->tm, f->b);
+}
+
+int dm_btree_del(struct dm_btree_info *info, dm_block_t root)
+{
+ int r;
+ struct del_stack *s;
+
+ s = kmalloc(sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ s->tm = info->tm;
+ s->top = -1;
+
+ r = push_frame(s, root, 1);
+ if (r)
+ goto out;
+
+ while (unprocessed_frames(s)) {
+ uint32_t flags;
+ struct frame *f;
+ dm_block_t b;
+
+ r = top_frame(s, &f);
+ if (r)
+ goto out;
+
+ if (f->current_child >= f->nr_children) {
+ pop_frame(s);
+ continue;
+ }
+
+ flags = le32_to_cpu(f->n->header.flags);
+ if (flags & INTERNAL_NODE) {
+ b = value64(f->n, f->current_child);
+ f->current_child++;
+ r = push_frame(s, b, f->level);
+ if (r)
+ goto out;
+
+ } else if (f->level != (info->levels - 1)) {
+ b = value64(f->n, f->current_child);
+ f->current_child++;
+ r = push_frame(s, b, f->level + 1);
+ if (r)
+ goto out;
+
+ } else {
+ if (info->value_type.dec) {
+ unsigned i;
+
+ for (i = 0; i < f->nr_children; i++)
+ info->value_type.dec(info->value_type.context,
+ value_ptr(f->n, i, info->value_type.size));
+ }
+ f->current_child = f->nr_children;
+ }
+ }
+
+out:
+ kfree(s);
+ return r;
+}
+EXPORT_SYMBOL_GPL(dm_btree_del);
+
+/*----------------------------------------------------------------*/
+
+static int btree_lookup_raw(struct ro_spine *s, dm_block_t block, uint64_t key,
+ int (*search_fn)(struct node *, uint64_t),
+ uint64_t *result_key, void *v, size_t value_size)
+{
+ int i, r;
+ uint32_t flags, nr_entries;
+
+ do {
+ r = ro_step(s, block);
+ if (r < 0)
+ return r;
+
+ i = search_fn(ro_node(s), key);
+
+ flags = le32_to_cpu(ro_node(s)->header.flags);
+ nr_entries = le32_to_cpu(ro_node(s)->header.nr_entries);
+ if (i < 0 || i >= nr_entries)
+ return -ENODATA;
+
+ if (flags & INTERNAL_NODE)
+ block = value64(ro_node(s), i);
+
+ } while (!(flags & LEAF_NODE));
+
+ *result_key = le64_to_cpu(ro_node(s)->keys[i]);
+ memcpy(v, value_ptr(ro_node(s), i, value_size), value_size);
+
+ return 0;
+}
+
+int dm_btree_lookup(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value_le)
+{
+ unsigned level, last_level = info->levels - 1;
+ int r = -ENODATA;
+ uint64_t rkey;
+ __le64 internal_value_le;
+ struct ro_spine spine;
+
+ init_ro_spine(&spine, info);
+ for (level = 0; level < info->levels; level++) {
+ size_t size;
+ void *value_p;
+
+ if (level == last_level) {
+ value_p = value_le;
+ size = info->value_type.size;
+
+ } else {
+ value_p = &internal_value_le;
+ size = sizeof(uint64_t);
+ }
+
+ r = btree_lookup_raw(&spine, root, keys[level],
+ lower_bound, &rkey,
+ value_p, size);
+
+ if (!r) {
+ if (rkey != keys[level]) {
+ exit_ro_spine(&spine);
+ return -ENODATA;
+ }
+ } else {
+ exit_ro_spine(&spine);
+ return r;
+ }
+
+ root = le64_to_cpu(internal_value_le);
+ }
+ exit_ro_spine(&spine);
+
+ return r;
+}
+EXPORT_SYMBOL_GPL(dm_btree_lookup);
+
+/*
+ * Splits a node by creating a sibling node and shifting half the nodes
+ * contents across. Assumes there is a parent node, and it has room for
+ * another child.
+ *
+ * Before:
+ * +--------+
+ * | Parent |
+ * +--------+
+ * |
+ * v
+ * +----------+
+ * | A ++++++ |
+ * +----------+
+ *
+ *
+ * After:
+ * +--------+
+ * | Parent |
+ * +--------+
+ * | |
+ * v +------+
+ * +---------+ |
+ * | A* +++ | v
+ * +---------+ +-------+
+ * | B +++ |
+ * +-------+
+ *
+ * Where A* is a shadow of A.
+ */
+static int btree_split_sibling(struct shadow_spine *s, dm_block_t root,
+ unsigned parent_index, uint64_t key)
+{
+ int r;
+ size_t size;
+ unsigned nr_left, nr_right;
+ struct dm_block *left, *right, *parent;
+ struct node *ln, *rn, *pn;
+ __le64 location;
+
+ left = shadow_current(s);
+
+ r = new_block(s->info, &right);
+ if (r < 0)
+ return r;
+
+ ln = dm_block_data(left);
+ rn = dm_block_data(right);
+
+ nr_left = le32_to_cpu(ln->header.nr_entries) / 2;
+ nr_right = le32_to_cpu(ln->header.nr_entries) - nr_left;
+
+ ln->header.nr_entries = cpu_to_le32(nr_left);
+
+ rn->header.flags = ln->header.flags;
+ rn->header.nr_entries = cpu_to_le32(nr_right);
+ rn->header.max_entries = ln->header.max_entries;
+ rn->header.value_size = ln->header.value_size;
+ memcpy(rn->keys, ln->keys + nr_left, nr_right * sizeof(rn->keys[0]));
+
+ size = le32_to_cpu(ln->header.flags) & INTERNAL_NODE ?
+ sizeof(uint64_t) : s->info->value_type.size;
+ memcpy(value_ptr(rn, 0, size), value_ptr(ln, nr_left, size),
+ size * nr_right);
+
+ /*
+ * Patch up the parent
+ */
+ parent = shadow_parent(s);
+
+ pn = dm_block_data(parent);
+ location = cpu_to_le64(dm_block_location(left));
+ __dm_bless_for_disk(&location);
+ memcpy_disk(value_ptr(pn, parent_index, sizeof(__le64)),
+ &location, sizeof(__le64));
+
+ location = cpu_to_le64(dm_block_location(right));
+ __dm_bless_for_disk(&location);
+
+ r = insert_at(sizeof(__le64), pn, parent_index + 1,
+ le64_to_cpu(rn->keys[0]), &location);
+ if (r)
+ return r;
+
+ if (key < le64_to_cpu(rn->keys[0])) {
+ unlock_block(s->info, right);
+ s->nodes[1] = left;
+ } else {
+ unlock_block(s->info, left);
+ s->nodes[1] = right;
+ }
+
+ return 0;
+}
+
+/*
+ * Splits a node by creating two new children beneath the given node.
+ *
+ * Before:
+ * +----------+
+ * | A ++++++ |
+ * +----------+
+ *
+ *
+ * After:
+ * +------------+
+ * | A (shadow) |
+ * +------------+
+ * | |
+ * +------+ +----+
+ * | |
+ * v v
+ * +-------+ +-------+
+ * | B +++ | | C +++ |
+ * +-------+ +-------+
+ */
+static int btree_split_beneath(struct shadow_spine *s, uint64_t key)
+{
+ int r;
+ size_t size;
+ unsigned nr_left, nr_right;
+ struct dm_block *left, *right, *new_parent;
+ struct node *pn, *ln, *rn;
+ __le64 val;
+
+ new_parent = shadow_current(s);
+
+ r = new_block(s->info, &left);
+ if (r < 0)
+ return r;
+
+ r = new_block(s->info, &right);
+ if (r < 0) {
+ /* FIXME: put left */
+ return r;
+ }
+
+ pn = dm_block_data(new_parent);
+ ln = dm_block_data(left);
+ rn = dm_block_data(right);
+
+ nr_left = le32_to_cpu(pn->header.nr_entries) / 2;
+ nr_right = le32_to_cpu(pn->header.nr_entries) - nr_left;
+
+ ln->header.flags = pn->header.flags;
+ ln->header.nr_entries = cpu_to_le32(nr_left);
+ ln->header.max_entries = pn->header.max_entries;
+ ln->header.value_size = pn->header.value_size;
+
+ rn->header.flags = pn->header.flags;
+ rn->header.nr_entries = cpu_to_le32(nr_right);
+ rn->header.max_entries = pn->header.max_entries;
+ rn->header.value_size = pn->header.value_size;
+
+ memcpy(ln->keys, pn->keys, nr_left * sizeof(pn->keys[0]));
+ memcpy(rn->keys, pn->keys + nr_left, nr_right * sizeof(pn->keys[0]));
+
+ size = le32_to_cpu(pn->header.flags) & INTERNAL_NODE ?
+ sizeof(__le64) : s->info->value_type.size;
+ memcpy(value_ptr(ln, 0, size), value_ptr(pn, 0, size), nr_left * size);
+ memcpy(value_ptr(rn, 0, size), value_ptr(pn, nr_left, size),
+ nr_right * size);
+
+ /* new_parent should just point to l and r now */
+ pn->header.flags = cpu_to_le32(INTERNAL_NODE);
+ pn->header.nr_entries = cpu_to_le32(2);
+ pn->header.max_entries = cpu_to_le32(
+ calc_max_entries(sizeof(__le64),
+ dm_bm_block_size(
+ dm_tm_get_bm(s->info->tm))));
+ pn->header.value_size = cpu_to_le32(sizeof(__le64));
+
+ val = cpu_to_le64(dm_block_location(left));
+ __dm_bless_for_disk(&val);
+ pn->keys[0] = ln->keys[0];
+ memcpy_disk(value_ptr(pn, 0, sizeof(__le64)), &val, sizeof(__le64));
+
+ val = cpu_to_le64(dm_block_location(right));
+ __dm_bless_for_disk(&val);
+ pn->keys[1] = rn->keys[0];
+ memcpy_disk(value_ptr(pn, 1, sizeof(__le64)), &val, sizeof(__le64));
+
+ /*
+ * rejig the spine. This is ugly, since it knows too
+ * much about the spine
+ */
+ if (s->nodes[0] != new_parent) {
+ unlock_block(s->info, s->nodes[0]);
+ s->nodes[0] = new_parent;
+ }
+ if (key < le64_to_cpu(rn->keys[0])) {
+ unlock_block(s->info, right);
+ s->nodes[1] = left;
+ } else {
+ unlock_block(s->info, left);
+ s->nodes[1] = right;
+ }
+ s->count = 2;
+
+ return 0;
+}
+
+static int btree_insert_raw(struct shadow_spine *s, dm_block_t root,
+ struct dm_btree_value_type *vt,
+ uint64_t key, unsigned *index)
+{
+ int r, i = *index, top = 1;
+ struct node *node;
+
+ for (;;) {
+ r = shadow_step(s, root, vt);
+ if (r < 0)
+ return r;
+
+ node = dm_block_data(shadow_current(s));
+
+ /*
+ * We have to patch up the parent node, ugly, but I don't
+ * see a way to do this automatically as part of the spine
+ * op.
+ */
+ if (shadow_has_parent(s) && i >= 0) { /* FIXME: second clause unness. */
+ __le64 location = cpu_to_le64(dm_block_location(shadow_current(s)));
+
+ __dm_bless_for_disk(&location);
+ memcpy_disk(value_ptr(dm_block_data(shadow_parent(s)), i, sizeof(uint64_t)),
+ &location, sizeof(__le64));
+ }
+
+ node = dm_block_data(shadow_current(s));
+
+ if (node->header.nr_entries == node->header.max_entries) {
+ if (top)
+ r = btree_split_beneath(s, key);
+ else
+ r = btree_split_sibling(s, root, i, key);
+
+ if (r < 0)
+ return r;
+ }
+
+ node = dm_block_data(shadow_current(s));
+
+ i = lower_bound(node, key);
+
+ if (le32_to_cpu(node->header.flags) & LEAF_NODE)
+ break;
+
+ if (i < 0) {
+ /* change the bounds on the lowest key */
+ node->keys[0] = cpu_to_le64(key);
+ i = 0;
+ }
+
+ root = value64(node, i);
+ top = 0;
+ }
+
+ if (i < 0 || le64_to_cpu(node->keys[i]) != key)
+ i++;
+
+ *index = i;
+ return 0;
+}
+
+static int insert(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root,
+ int *inserted)
+ __dm_written_to_disk(value)
+{
+ int r, need_insert;
+ unsigned level, index = -1, last_level = info->levels - 1;
+ dm_block_t block = root;
+ struct shadow_spine spine;
+ struct node *n;
+ struct dm_btree_value_type le64_type;
+
+ le64_type.context = NULL;
+ le64_type.size = sizeof(__le64);
+ le64_type.inc = NULL;
+ le64_type.dec = NULL;
+ le64_type.equal = NULL;
+
+ init_shadow_spine(&spine, info);
+
+ for (level = 0; level < (info->levels - 1); level++) {
+ r = btree_insert_raw(&spine, block, &le64_type, keys[level], &index);
+ if (r < 0)
+ goto bad;
+
+ n = dm_block_data(shadow_current(&spine));
+ need_insert = ((index >= le32_to_cpu(n->header.nr_entries)) ||
+ (le64_to_cpu(n->keys[index]) != keys[level]));
+
+ if (need_insert) {
+ dm_block_t new_tree;
+ __le64 new_le;
+
+ r = dm_btree_empty(info, &new_tree);
+ if (r < 0)
+ goto bad;
+
+ new_le = cpu_to_le64(new_tree);
+ __dm_bless_for_disk(&new_le);
+
+ r = insert_at(sizeof(uint64_t), n, index,
+ keys[level], &new_le);
+ if (r)
+ goto bad;
+ }
+
+ if (level < last_level)
+ block = value64(n, index);
+ }
+
+ r = btree_insert_raw(&spine, block, &info->value_type,
+ keys[level], &index);
+ if (r < 0)
+ goto bad;
+
+ n = dm_block_data(shadow_current(&spine));
+ need_insert = ((index >= le32_to_cpu(n->header.nr_entries)) ||
+ (le64_to_cpu(n->keys[index]) != keys[level]));
+
+ if (need_insert) {
+ if (inserted)
+ *inserted = 1;
+
+ r = insert_at(info->value_type.size, n, index,
+ keys[level], value);
+ if (r)
+ goto bad_unblessed;
+ } else {
+ if (inserted)
+ *inserted = 0;
+
+ if (info->value_type.dec &&
+ (!info->value_type.equal ||
+ !info->value_type.equal(
+ info->value_type.context,
+ value_ptr(n, index, info->value_type.size),
+ value))) {
+ info->value_type.dec(info->value_type.context,
+ value_ptr(n, index, info->value_type.size));
+ }
+ memcpy_disk(value_ptr(n, index, info->value_type.size),
+ value, info->value_type.size);
+ }
+
+ *new_root = shadow_root(&spine);
+ exit_shadow_spine(&spine);
+
+ return 0;
+
+bad:
+ __dm_unbless_for_disk(value);
+bad_unblessed:
+ exit_shadow_spine(&spine);
+ return r;
+}
+
+int dm_btree_insert(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root)
+ __dm_written_to_disk(value)
+{
+ return insert(info, root, keys, value, new_root, NULL);
+}
+EXPORT_SYMBOL_GPL(dm_btree_insert);
+
+int dm_btree_insert_notify(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root,
+ int *inserted)
+ __dm_written_to_disk(value)
+{
+ return insert(info, root, keys, value, new_root, inserted);
+}
+EXPORT_SYMBOL_GPL(dm_btree_insert_notify);
+
+/*----------------------------------------------------------------*/
+
+static int find_highest_key(struct ro_spine *s, dm_block_t block,
+ uint64_t *result_key, dm_block_t *next_block)
+{
+ int i, r;
+ uint32_t flags;
+
+ do {
+ r = ro_step(s, block);
+ if (r < 0)
+ return r;
+
+ flags = le32_to_cpu(ro_node(s)->header.flags);
+ i = le32_to_cpu(ro_node(s)->header.nr_entries);
+ if (!i)
+ return -ENODATA;
+ else
+ i--;
+
+ *result_key = le64_to_cpu(ro_node(s)->keys[i]);
+ if (next_block || flags & INTERNAL_NODE)
+ block = value64(ro_node(s), i);
+
+ } while (flags & INTERNAL_NODE);
+
+ if (next_block)
+ *next_block = block;
+ return 0;
+}
+
+int dm_btree_find_highest_key(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *result_keys)
+{
+ int r = 0, count = 0, level;
+ struct ro_spine spine;
+
+ init_ro_spine(&spine, info);
+ for (level = 0; level < info->levels; level++) {
+ r = find_highest_key(&spine, root, result_keys + level,
+ level == info->levels - 1 ? NULL : &root);
+ if (r == -ENODATA) {
+ r = 0;
+ break;
+
+ } else if (r)
+ break;
+
+ count++;
+ }
+ exit_ro_spine(&spine);
+
+ return r ? r : count;
+}
+EXPORT_SYMBOL_GPL(dm_btree_find_highest_key);
diff --git a/drivers/md/persistent-data/dm-btree.h b/drivers/md/persistent-data/dm-btree.h
new file mode 100644
index 0000000..ae02c84
--- /dev/null
+++ b/drivers/md/persistent-data/dm-btree.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+#ifndef _LINUX_DM_BTREE_H
+#define _LINUX_DM_BTREE_H
+
+#include "dm-block-manager.h"
+
+struct dm_transaction_manager;
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Annotations used to check on-disk metadata is handled as little-endian.
+ */
+#ifdef __CHECKER__
+# define __dm_written_to_disk(x) __releases(x)
+# define __dm_reads_from_disk(x) __acquires(x)
+# define __dm_bless_for_disk(x) __acquire(x)
+# define __dm_unbless_for_disk(x) __release(x)
+#else
+# define __dm_written_to_disk(x)
+# define __dm_reads_from_disk(x)
+# define __dm_bless_for_disk(x)
+# define __dm_unbless_for_disk(x)
+#endif
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Manipulates hierarchical B+ trees with 64-bit keys and arbitrary-sized
+ * values.
+ */
+
+/*
+ * Infomation about the values stored within the btree.
+ */
+struct dm_btree_value_type {
+ void *context;
+
+ /*
+ * The size in bytes of each value.
+ */
+ uint32_t size;
+
+ /*
+ * Any of these methods can be safely set to NULL if you do not
+ * need the corresponding feature.
+ */
+
+ /*
+ * The btree is making a duplicate of the value, for instance
+ * because previously-shared btree nodes have now diverged.
+ * @value argument is the new copy that the copy function may modify.
+ * (Probably it just wants to increment a reference count
+ * somewhere.) This method is _not_ called for insertion of a new
+ * value: It is assumed the ref count is already 1.
+ */
+ void (*inc)(void *context, void *value);
+
+ /*
+ * This value is being deleted. The btree takes care of freeing
+ * the memory pointed to by @value. Often the del function just
+ * needs to decrement a reference count somewhere.
+ */
+ void (*dec)(void *context, void *value);
+
+ /*
+ * A test for equality between two values. When a value is
+ * overwritten with a new one, the old one has the dec method
+ * called _unless_ the new and old value are deemed equal.
+ */
+ int (*equal)(void *context, void *value1, void *value2);
+};
+
+/*
+ * The shape and contents of a btree.
+ */
+struct dm_btree_info {
+ struct dm_transaction_manager *tm;
+
+ /*
+ * Number of nested btrees. (Not the depth of a single tree.)
+ */
+ unsigned levels;
+ struct dm_btree_value_type value_type;
+};
+
+/*
+ * Set up an empty tree. O(1).
+ */
+int dm_btree_empty(struct dm_btree_info *info, dm_block_t *root);
+
+/*
+ * Delete a tree. O(n) - this is the slow one! It can also block, so
+ * please don't call it on an IO path.
+ */
+int dm_btree_del(struct dm_btree_info *info, dm_block_t root);
+
+/*
+ * All the lookup functions return -ENODATA if the key cannot be found.
+ */
+
+/*
+ * Tries to find a key that matches exactly. O(ln(n))
+ */
+int dm_btree_lookup(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value_le);
+
+/*
+ * Insertion (or overwrite an existing value). O(ln(n))
+ */
+int dm_btree_insert(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root)
+ __dm_written_to_disk(value);
+
+/*
+ * A variant of insert that indicates whether it actually inserted or just
+ * overwrote. Useful if you're keeping track of the number of entries in a
+ * tree.
+ */
+int dm_btree_insert_notify(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, void *value, dm_block_t *new_root,
+ int *inserted)
+ __dm_written_to_disk(value);
+
+/*
+ * Remove a key if present. This doesn't remove empty sub trees. Normally
+ * subtrees represent a separate entity, like a snapshot map, so this is
+ * correct behaviour. O(ln(n)).
+ */
+int dm_btree_remove(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *keys, dm_block_t *new_root);
+
+/*
+ * Returns < 0 on failure. Otherwise the number of key entries that have
+ * been filled out. Remember trees can have zero entries, and as such have
+ * no highest key.
+ */
+int dm_btree_find_highest_key(struct dm_btree_info *info, dm_block_t root,
+ uint64_t *result_keys);
+
+#endif /* _LINUX_DM_BTREE_H */
diff --git a/drivers/md/persistent-data/dm-persistent-data-internal.h b/drivers/md/persistent-data/dm-persistent-data-internal.h
new file mode 100644
index 0000000..c49e26f
--- /dev/null
+++ b/drivers/md/persistent-data/dm-persistent-data-internal.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _DM_PERSISTENT_DATA_INTERNAL_H
+#define _DM_PERSISTENT_DATA_INTERNAL_H
+
+#include "dm-block-manager.h"
+
+static inline unsigned dm_hash_block(dm_block_t b, unsigned hash_mask)
+{
+ const unsigned BIG_PRIME = 4294967291UL;
+
+ return (((unsigned) b) * BIG_PRIME) & hash_mask;
+}
+
+#endif /* _PERSISTENT_DATA_INTERNAL_H */
diff --git a/drivers/md/persistent-data/dm-space-map-checker.c b/drivers/md/persistent-data/dm-space-map-checker.c
new file mode 100644
index 0000000..bb44a93
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-checker.c
@@ -0,0 +1,437 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map-checker.h"
+
+#include <linux/device-mapper.h>
+
+#ifdef CONFIG_DM_DEBUG_SPACE_MAPS
+
+#define DM_MSG_PREFIX "space map checker"
+
+/*----------------------------------------------------------------*/
+
+struct count_array {
+ dm_block_t nr;
+ dm_block_t nr_free;
+
+ uint32_t *counts;
+};
+
+static int ca_get_count(struct count_array *ca, dm_block_t b, uint32_t *count)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ *count = ca->counts[b];
+ return 0;
+}
+
+static int ca_count_more_than_one(struct count_array *ca, dm_block_t b, int *r)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ *r = ca->counts[b] > 1;
+ return 0;
+}
+
+static int ca_set_count(struct count_array *ca, dm_block_t b, uint32_t count)
+{
+ uint32_t old_count;
+
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ old_count = ca->counts[b];
+
+ if (!count && old_count)
+ ca->nr_free++;
+
+ else if (count && !old_count)
+ ca->nr_free--;
+
+ ca->counts[b] = count;
+ return 0;
+}
+
+static int ca_inc_block(struct count_array *ca, dm_block_t b)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ ca_set_count(ca, b, ca->counts[b] + 1);
+ return 0;
+}
+
+static int ca_dec_block(struct count_array *ca, dm_block_t b)
+{
+ if (b >= ca->nr)
+ return -EINVAL;
+
+ BUG_ON(ca->counts[b] == 0);
+ ca_set_count(ca, b, ca->counts[b] - 1);
+ return 0;
+}
+
+static int ca_create(struct count_array *ca, struct dm_space_map *sm)
+{
+ int r;
+ dm_block_t nr_blocks;
+
+ r = dm_sm_get_nr_blocks(sm, &nr_blocks);
+ if (r)
+ return r;
+
+ ca->nr = nr_blocks;
+ ca->nr_free = nr_blocks;
+ ca->counts = kzalloc(sizeof(*ca->counts) * nr_blocks, GFP_KERNEL);
+ if (!ca->counts)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int ca_load(struct count_array *ca, struct dm_space_map *sm)
+{
+ int r;
+ uint32_t count;
+ dm_block_t nr_blocks, i;
+
+ r = dm_sm_get_nr_blocks(sm, &nr_blocks);
+ if (r)
+ return r;
+
+ BUG_ON(ca->nr != nr_blocks);
+
+ DMWARN("Loading debug space map from disk. This may take some time");
+ for (i = 0; i < nr_blocks; i++) {
+ r = dm_sm_get_count(sm, i, &count);
+ if (r) {
+ DMERR("load failed");
+ return r;
+ }
+
+ ca_set_count(ca, i, count);
+ }
+ DMWARN("Load complete");
+
+ return 0;
+}
+
+static int ca_extend(struct count_array *ca, dm_block_t extra_blocks)
+{
+ dm_block_t nr_blocks = ca->nr + extra_blocks;
+ uint32_t *counts = kzalloc(sizeof(*counts) * nr_blocks, GFP_KERNEL);
+ if (!counts)
+ return -ENOMEM;
+
+ memcpy(counts, ca->counts, sizeof(*counts) * ca->nr);
+ kfree(ca->counts);
+ ca->nr = nr_blocks;
+ ca->nr_free += extra_blocks;
+ ca->counts = counts;
+ return 0;
+}
+
+static int ca_commit(struct count_array *old, struct count_array *new)
+{
+ if (old->nr != new->nr) {
+ BUG_ON(old->nr > new->nr);
+ ca_extend(old, new->nr - old->nr);
+ }
+
+ BUG_ON(old->nr != new->nr);
+ old->nr_free = new->nr_free;
+ memcpy(old->counts, new->counts, sizeof(*old->counts) * old->nr);
+ return 0;
+}
+
+static void ca_destroy(struct count_array *ca)
+{
+ kfree(ca->counts);
+}
+
+/*----------------------------------------------------------------*/
+
+struct sm_checker {
+ struct dm_space_map sm;
+
+ struct count_array old_counts;
+ struct count_array counts;
+
+ struct dm_space_map *real_sm;
+};
+
+static void sm_checker_destroy(struct dm_space_map *sm)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+
+ dm_sm_destroy(smc->real_sm);
+ ca_destroy(&smc->old_counts);
+ ca_destroy(&smc->counts);
+ kfree(smc);
+}
+
+static int sm_checker_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_get_nr_blocks(smc->real_sm, count);
+ if (!r)
+ BUG_ON(smc->old_counts.nr != *count);
+ return r;
+}
+
+static int sm_checker_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_get_nr_free(smc->real_sm, count);
+ if (!r) {
+ /*
+ * Slow, but we know it's correct.
+ */
+ dm_block_t b, n = 0;
+ for (b = 0; b < smc->old_counts.nr; b++)
+ if (smc->old_counts.counts[b] == 0 &&
+ smc->counts.counts[b] == 0)
+ n++;
+
+ if (n != *count)
+ DMERR("free block counts differ, checker %u, sm-disk:%u",
+ (unsigned) n, (unsigned) *count);
+ }
+ return r;
+}
+
+static int sm_checker_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_new_block(smc->real_sm, b);
+
+ if (!r) {
+ BUG_ON(*b >= smc->old_counts.nr);
+ BUG_ON(smc->old_counts.counts[*b] != 0);
+ BUG_ON(*b >= smc->counts.nr);
+ BUG_ON(smc->counts.counts[*b] != 0);
+ ca_set_count(&smc->counts, *b, 1);
+ }
+
+ return r;
+}
+
+static int sm_checker_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_inc_block(smc->real_sm, b);
+ int r2 = ca_inc_block(&smc->counts, b);
+ BUG_ON(r != r2);
+ return r;
+}
+
+static int sm_checker_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_dec_block(smc->real_sm, b);
+ int r2 = ca_dec_block(&smc->counts, b);
+ BUG_ON(r != r2);
+ return r;
+}
+
+static int sm_checker_get_count(struct dm_space_map *sm, dm_block_t b, uint32_t *result)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ uint32_t result2 = 0;
+ int r = dm_sm_get_count(smc->real_sm, b, result);
+ int r2 = ca_get_count(&smc->counts, b, &result2);
+
+ BUG_ON(r != r2);
+ if (!r)
+ BUG_ON(*result != result2);
+ return r;
+}
+
+static int sm_checker_count_more_than_one(struct dm_space_map *sm, dm_block_t b, int *result)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int result2 = 0;
+ int r = dm_sm_count_is_more_than_one(smc->real_sm, b, result);
+ int r2 = ca_count_more_than_one(&smc->counts, b, &result2);
+
+ BUG_ON(r != r2);
+ if (!r)
+ BUG_ON(!(*result) && result2);
+ return r;
+}
+
+static int sm_checker_set_count(struct dm_space_map *sm, dm_block_t b, uint32_t count)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ uint32_t old_rc;
+ int r = dm_sm_set_count(smc->real_sm, b, count);
+ int r2;
+
+ BUG_ON(b >= smc->counts.nr);
+ old_rc = smc->counts.counts[b];
+ r2 = ca_set_count(&smc->counts, b, count);
+ BUG_ON(r != r2);
+
+ return r;
+}
+
+static int sm_checker_commit(struct dm_space_map *sm)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r;
+
+ r = dm_sm_commit(smc->real_sm);
+ if (r)
+ return r;
+
+ r = ca_commit(&smc->old_counts, &smc->counts);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int sm_checker_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ int r = dm_sm_extend(smc->real_sm, extra_blocks);
+ if (r)
+ return r;
+
+ return ca_extend(&smc->counts, extra_blocks);
+}
+
+static int sm_checker_root_size(struct dm_space_map *sm, size_t *result)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ return dm_sm_root_size(smc->real_sm, result);
+}
+
+static int sm_checker_copy_root(struct dm_space_map *sm, void *copy_to_here_le, size_t len)
+{
+ struct sm_checker *smc = container_of(sm, struct sm_checker, sm);
+ return dm_sm_copy_root(smc->real_sm, copy_to_here_le, len);
+}
+
+/*----------------------------------------------------------------*/
+
+static struct dm_space_map ops_ = {
+ .destroy = sm_checker_destroy,
+ .get_nr_blocks = sm_checker_get_nr_blocks,
+ .get_nr_free = sm_checker_get_nr_free,
+ .inc_block = sm_checker_inc_block,
+ .dec_block = sm_checker_dec_block,
+ .new_block = sm_checker_new_block,
+ .get_count = sm_checker_get_count,
+ .count_is_more_than_one = sm_checker_count_more_than_one,
+ .set_count = sm_checker_set_count,
+ .commit = sm_checker_commit,
+ .extend = sm_checker_extend,
+ .root_size = sm_checker_root_size,
+ .copy_root = sm_checker_copy_root
+};
+
+struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm)
+{
+ int r;
+ struct sm_checker *smc;
+
+ if (!sm)
+ return NULL;
+
+ smc = kmalloc(sizeof(*smc), GFP_KERNEL);
+ if (!smc)
+ return NULL;
+
+ memcpy(&smc->sm, &ops_, sizeof(smc->sm));
+ r = ca_create(&smc->old_counts, sm);
+ if (r) {
+ kfree(smc);
+ return NULL;
+ }
+
+ r = ca_create(&smc->counts, sm);
+ if (r) {
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ smc->real_sm = sm;
+
+ r = ca_load(&smc->counts, sm);
+ if (r) {
+ ca_destroy(&smc->counts);
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ r = ca_commit(&smc->old_counts, &smc->counts);
+ if (r) {
+ ca_destroy(&smc->counts);
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ return &smc->sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create);
+
+struct dm_space_map *dm_sm_checker_create_fresh(struct dm_space_map *sm)
+{
+ int r;
+ struct sm_checker *smc;
+
+ if (!sm)
+ return NULL;
+
+ smc = kmalloc(sizeof(*smc), GFP_KERNEL);
+ if (!smc)
+ return NULL;
+
+ memcpy(&smc->sm, &ops_, sizeof(smc->sm));
+ r = ca_create(&smc->old_counts, sm);
+ if (r) {
+ kfree(smc);
+ return NULL;
+ }
+
+ r = ca_create(&smc->counts, sm);
+ if (r) {
+ ca_destroy(&smc->old_counts);
+ kfree(smc);
+ return NULL;
+ }
+
+ smc->real_sm = sm;
+ return &smc->sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create_fresh);
+
+/*----------------------------------------------------------------*/
+
+#else
+
+struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm)
+{
+ return sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create);
+
+struct dm_space_map *dm_sm_checker_create_fresh(struct dm_space_map *sm)
+{
+ return sm;
+}
+EXPORT_SYMBOL_GPL(dm_sm_checker_create_fresh);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/persistent-data/dm-space-map-checker.h b/drivers/md/persistent-data/dm-space-map-checker.h
new file mode 100644
index 0000000..444dccf
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-checker.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef SNAPSHOTS_SPACE_MAP_CHECKER_H
+#define SNAPSHOTS_SPACE_MAP_CHECKER_H
+
+#include "dm-space-map.h"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * This space map wraps a real on-disk space map, and verifies all of its
+ * operations. It uses a lot of memory, so only use if you have a specific
+ * problem that you're debugging.
+ *
+ * Ownership of @sm passes.
+ */
+struct dm_space_map *dm_sm_checker_create(struct dm_space_map *sm);
+struct dm_space_map *dm_sm_checker_create_fresh(struct dm_space_map *sm);
+
+/*----------------------------------------------------------------*/
+
+#endif
diff --git a/drivers/md/persistent-data/dm-space-map-common.c b/drivers/md/persistent-data/dm-space-map-common.c
new file mode 100644
index 0000000..df2494c
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -0,0 +1,705 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map-common.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/bitops.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "space map common"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Index validator.
+ */
+#define INDEX_CSUM_XOR 160478
+
+static void index_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_metadata_index *mi_le = dm_block_data(b);
+
+ mi_le->blocknr = cpu_to_le64(dm_block_location(b));
+ mi_le->csum = cpu_to_le32(dm_bm_checksum(&mi_le->padding,
+ block_size - sizeof(__le32),
+ INDEX_CSUM_XOR));
+}
+
+static int index_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_metadata_index *mi_le = dm_block_data(b);
+ __le32 csum_disk;
+
+ if (dm_block_location(b) != le64_to_cpu(mi_le->blocknr)) {
+ DMERR("index_check failed blocknr %llu wanted %llu",
+ le64_to_cpu(mi_le->blocknr), dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ csum_disk = cpu_to_le32(dm_bm_checksum(&mi_le->padding,
+ block_size - sizeof(__le32),
+ INDEX_CSUM_XOR));
+ if (csum_disk != mi_le->csum) {
+ DMERR("index_check failed csum %u wanted %u",
+ le32_to_cpu(csum_disk), le32_to_cpu(mi_le->csum));
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+static struct dm_block_validator index_validator = {
+ .name = "index",
+ .prepare_for_write = index_prepare_for_write,
+ .check = index_check
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Bitmap validator
+ */
+#define BITMAP_CSUM_XOR 240779
+
+static void bitmap_prepare_for_write(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_bitmap_header *disk_header = dm_block_data(b);
+
+ disk_header->blocknr = cpu_to_le64(dm_block_location(b));
+ disk_header->csum = cpu_to_le32(dm_bm_checksum(&disk_header->not_used,
+ block_size - sizeof(__le32),
+ BITMAP_CSUM_XOR));
+}
+
+static int bitmap_check(struct dm_block_validator *v,
+ struct dm_block *b,
+ size_t block_size)
+{
+ struct disk_bitmap_header *disk_header = dm_block_data(b);
+ __le32 csum_disk;
+
+ if (dm_block_location(b) != le64_to_cpu(disk_header->blocknr)) {
+ DMERR("bitmap check failed blocknr %llu wanted %llu",
+ le64_to_cpu(disk_header->blocknr), dm_block_location(b));
+ return -ENOTBLK;
+ }
+
+ csum_disk = cpu_to_le32(dm_bm_checksum(&disk_header->not_used,
+ block_size - sizeof(__le32),
+ BITMAP_CSUM_XOR));
+ if (csum_disk != disk_header->csum) {
+ DMERR("bitmap check failed csum %u wanted %u",
+ le32_to_cpu(csum_disk), le32_to_cpu(disk_header->csum));
+ return -EILSEQ;
+ }
+
+ return 0;
+}
+
+static struct dm_block_validator dm_sm_bitmap_validator = {
+ .name = "sm_bitmap",
+ .prepare_for_write = bitmap_prepare_for_write,
+ .check = bitmap_check
+};
+
+/*----------------------------------------------------------------*/
+
+#define ENTRIES_PER_WORD 32
+#define ENTRIES_SHIFT 5
+
+static void *dm_bitmap_data(struct dm_block *b)
+{
+ return dm_block_data(b) + sizeof(struct disk_bitmap_header);
+}
+
+#define WORD_MASK_HIGH 0xAAAAAAAAAAAAAAAAULL
+
+static unsigned bitmap_word_used(void *addr, unsigned b)
+{
+ __le64 *words_le = addr;
+ __le64 *w_le = words_le + (b >> ENTRIES_SHIFT);
+
+ uint64_t bits = le64_to_cpu(*w_le);
+ uint64_t mask = (bits + WORD_MASK_HIGH + 1) & WORD_MASK_HIGH;
+
+ return !(~bits & mask);
+}
+
+static unsigned sm_lookup_bitmap(void *addr, unsigned b)
+{
+ __le64 *words_le = addr;
+ __le64 *w_le = words_le + (b >> ENTRIES_SHIFT);
+ unsigned hi, lo;
+
+ b = (b & (ENTRIES_PER_WORD - 1)) << 1;
+ hi = !!test_bit_le(b, (void *) w_le);
+ lo = !!test_bit_le(b + 1, (void *) w_le);
+ return (hi << 1) | lo;
+}
+
+static void sm_set_bitmap(void *addr, unsigned b, unsigned val)
+{
+ __le64 *words_le = addr;
+ __le64 *w_le = words_le + (b >> ENTRIES_SHIFT);
+
+ b = (b & (ENTRIES_PER_WORD - 1)) << 1;
+
+ if (val & 2)
+ __set_bit_le(b, (void *) w_le);
+ else
+ __clear_bit_le(b, (void *) w_le);
+
+ if (val & 1)
+ __set_bit_le(b + 1, (void *) w_le);
+ else
+ __clear_bit_le(b + 1, (void *) w_le);
+}
+
+static int sm_find_free(void *addr, unsigned begin, unsigned end,
+ unsigned *result)
+{
+ while (begin < end) {
+ if (!(begin & (ENTRIES_PER_WORD - 1)) &&
+ bitmap_word_used(addr, begin)) {
+ begin += ENTRIES_PER_WORD;
+ continue;
+ }
+
+ if (!sm_lookup_bitmap(addr, begin)) {
+ *result = begin;
+ return 0;
+ }
+
+ begin++;
+ }
+
+ return -ENOSPC;
+}
+
+/*----------------------------------------------------------------*/
+
+static int sm_ll_init(struct ll_disk *ll, struct dm_transaction_manager *tm)
+{
+ ll->tm = tm;
+
+ ll->bitmap_info.tm = tm;
+ ll->bitmap_info.levels = 1;
+
+ /*
+ * Because the new bitmap blocks are created via a shadow
+ * operation, the old entry has already had its reference count
+ * decremented and we don't need the btree to do any bookkeeping.
+ */
+ ll->bitmap_info.value_type.size = sizeof(struct disk_index_entry);
+ ll->bitmap_info.value_type.inc = NULL;
+ ll->bitmap_info.value_type.dec = NULL;
+ ll->bitmap_info.value_type.equal = NULL;
+
+ ll->ref_count_info.tm = tm;
+ ll->ref_count_info.levels = 1;
+ ll->ref_count_info.value_type.size = sizeof(uint32_t);
+ ll->ref_count_info.value_type.inc = NULL;
+ ll->ref_count_info.value_type.dec = NULL;
+ ll->ref_count_info.value_type.equal = NULL;
+
+ ll->block_size = dm_bm_block_size(dm_tm_get_bm(tm));
+
+ if (ll->block_size > (1 << 30)) {
+ DMERR("block size too big to hold bitmaps");
+ return -EINVAL;
+ }
+
+ ll->entries_per_block = (ll->block_size - sizeof(struct disk_bitmap_header)) *
+ ENTRIES_PER_BYTE;
+ ll->nr_blocks = 0;
+ ll->bitmap_root = 0;
+ ll->ref_count_root = 0;
+
+ return 0;
+}
+
+int sm_ll_extend(struct ll_disk *ll, dm_block_t extra_blocks)
+{
+ int r;
+ dm_block_t i, nr_blocks, nr_indexes;
+ unsigned old_blocks, blocks;
+
+ nr_blocks = ll->nr_blocks + extra_blocks;
+ old_blocks = dm_sector_div_up(ll->nr_blocks, ll->entries_per_block);
+ blocks = dm_sector_div_up(nr_blocks, ll->entries_per_block);
+
+ nr_indexes = dm_sector_div_up(nr_blocks, ll->entries_per_block);
+ if (nr_indexes > ll->max_entries(ll)) {
+ DMERR("space map too large");
+ return -EINVAL;
+ }
+
+ for (i = old_blocks; i < blocks; i++) {
+ struct dm_block *b;
+ struct disk_index_entry idx;
+
+ r = dm_tm_new_block(ll->tm, &dm_sm_bitmap_validator, &b);
+ if (r < 0)
+ return r;
+ idx.blocknr = cpu_to_le64(dm_block_location(b));
+
+ r = dm_tm_unlock(ll->tm, b);
+ if (r < 0)
+ return r;
+
+ idx.nr_free = cpu_to_le32(ll->entries_per_block);
+ idx.none_free_before = 0;
+
+ r = ll->save_ie(ll, i, &idx);
+ if (r < 0)
+ return r;
+ }
+
+ ll->nr_blocks = nr_blocks;
+ return 0;
+}
+
+int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result)
+{
+ int r;
+ dm_block_t index = b;
+ struct disk_index_entry ie_disk;
+ struct dm_block *blk;
+
+ b = do_div(index, ll->entries_per_block);
+ r = ll->load_ie(ll, index, &ie_disk);
+ if (r < 0)
+ return r;
+
+ r = dm_tm_read_lock(ll->tm, le64_to_cpu(ie_disk.blocknr),
+ &dm_sm_bitmap_validator, &blk);
+ if (r < 0)
+ return r;
+
+ *result = sm_lookup_bitmap(dm_bitmap_data(blk), b);
+
+ return dm_tm_unlock(ll->tm, blk);
+}
+
+int sm_ll_lookup(struct ll_disk *ll, dm_block_t b, uint32_t *result)
+{
+ __le32 le_rc;
+ int r = sm_ll_lookup_bitmap(ll, b, result);
+
+ if (r)
+ return r;
+
+ if (*result != 3)
+ return r;
+
+ r = dm_btree_lookup(&ll->ref_count_info, ll->ref_count_root, &b, &le_rc);
+ if (r < 0)
+ return r;
+
+ *result = le32_to_cpu(le_rc);
+
+ return r;
+}
+
+int sm_ll_find_free_block(struct ll_disk *ll, dm_block_t begin,
+ dm_block_t end, dm_block_t *result)
+{
+ int r;
+ struct disk_index_entry ie_disk;
+ dm_block_t i, index_begin = begin;
+ dm_block_t index_end = dm_sector_div_up(end, ll->entries_per_block);
+
+ /*
+ * FIXME: Use shifts
+ */
+ begin = do_div(index_begin, ll->entries_per_block);
+ end = do_div(end, ll->entries_per_block);
+
+ for (i = index_begin; i < index_end; i++, begin = 0) {
+ struct dm_block *blk;
+ unsigned position;
+ uint32_t bit_end;
+
+ r = ll->load_ie(ll, i, &ie_disk);
+ if (r < 0)
+ return r;
+
+ if (le32_to_cpu(ie_disk.nr_free) == 0)
+ continue;
+
+ r = dm_tm_read_lock(ll->tm, le64_to_cpu(ie_disk.blocknr),
+ &dm_sm_bitmap_validator, &blk);
+ if (r < 0)
+ return r;
+
+ bit_end = (i == index_end - 1) ? end : ll->entries_per_block;
+
+ r = sm_find_free(dm_bitmap_data(blk),
+ max_t(unsigned, begin, le32_to_cpu(ie_disk.none_free_before)),
+ bit_end, &position);
+ if (r == -ENOSPC) {
+ /*
+ * This might happen because we started searching
+ * part way through the bitmap.
+ */
+ dm_tm_unlock(ll->tm, blk);
+ continue;
+
+ } else if (r < 0) {
+ dm_tm_unlock(ll->tm, blk);
+ return r;
+ }
+
+ r = dm_tm_unlock(ll->tm, blk);
+ if (r < 0)
+ return r;
+
+ *result = i * ll->entries_per_block + (dm_block_t) position;
+ return 0;
+ }
+
+ return -ENOSPC;
+}
+
+int sm_ll_insert(struct ll_disk *ll, dm_block_t b,
+ uint32_t ref_count, enum allocation_event *ev)
+{
+ int r;
+ uint32_t bit, old;
+ struct dm_block *nb;
+ dm_block_t index = b;
+ struct disk_index_entry ie_disk;
+ void *bm_le;
+ int inc;
+
+ bit = do_div(index, ll->entries_per_block);
+ r = ll->load_ie(ll, index, &ie_disk);
+ if (r < 0)
+ return r;
+
+ r = dm_tm_shadow_block(ll->tm, le64_to_cpu(ie_disk.blocknr),
+ &dm_sm_bitmap_validator, &nb, &inc);
+ if (r < 0) {
+ DMERR("dm_tm_shadow_block() failed");
+ return r;
+ }
+ ie_disk.blocknr = cpu_to_le64(dm_block_location(nb));
+
+ bm_le = dm_bitmap_data(nb);
+ old = sm_lookup_bitmap(bm_le, bit);
+
+ if (ref_count <= 2) {
+ sm_set_bitmap(bm_le, bit, ref_count);
+
+ r = dm_tm_unlock(ll->tm, nb);
+ if (r < 0)
+ return r;
+
+#if 0
+ /* FIXME: dm_btree_remove doesn't handle this yet */
+ if (old > 2) {
+ r = dm_btree_remove(&ll->ref_count_info,
+ ll->ref_count_root,
+ &b, &ll->ref_count_root);
+ if (r)
+ return r;
+ }
+#endif
+
+ } else {
+ __le32 le_rc = cpu_to_le32(ref_count);
+
+ sm_set_bitmap(bm_le, bit, 3);
+ r = dm_tm_unlock(ll->tm, nb);
+ if (r < 0)
+ return r;
+
+ __dm_bless_for_disk(&le_rc);
+ r = dm_btree_insert(&ll->ref_count_info, ll->ref_count_root,
+ &b, &le_rc, &ll->ref_count_root);
+ if (r < 0) {
+ DMERR("ref count insert failed");
+ return r;
+ }
+ }
+
+ if (ref_count && !old) {
+ *ev = SM_ALLOC;
+ ll->nr_allocated++;
+ ie_disk.nr_free = cpu_to_le32(le32_to_cpu(ie_disk.nr_free) - 1);
+ if (le32_to_cpu(ie_disk.none_free_before) == bit)
+ ie_disk.none_free_before = cpu_to_le32(bit + 1);
+
+ } else if (old && !ref_count) {
+ *ev = SM_FREE;
+ ll->nr_allocated--;
+ ie_disk.nr_free = cpu_to_le32(le32_to_cpu(ie_disk.nr_free) + 1);
+ ie_disk.none_free_before = cpu_to_le32(min(le32_to_cpu(ie_disk.none_free_before), bit));
+ }
+
+ return ll->save_ie(ll, index, &ie_disk);
+}
+
+int sm_ll_inc(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev)
+{
+ int r;
+ uint32_t rc;
+
+ r = sm_ll_lookup(ll, b, &rc);
+ if (r)
+ return r;
+
+ return sm_ll_insert(ll, b, rc + 1, ev);
+}
+
+int sm_ll_dec(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev)
+{
+ int r;
+ uint32_t rc;
+
+ r = sm_ll_lookup(ll, b, &rc);
+ if (r)
+ return r;
+
+ if (!rc)
+ return -EINVAL;
+
+ return sm_ll_insert(ll, b, rc - 1, ev);
+}
+
+int sm_ll_commit(struct ll_disk *ll)
+{
+ return ll->commit(ll);
+}
+
+/*----------------------------------------------------------------*/
+
+static int metadata_ll_load_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ memcpy(ie, ll->mi_le.index + index, sizeof(*ie));
+ return 0;
+}
+
+static int metadata_ll_save_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ memcpy(ll->mi_le.index + index, ie, sizeof(*ie));
+ return 0;
+}
+
+static int metadata_ll_init_index(struct ll_disk *ll)
+{
+ int r;
+ struct dm_block *b;
+
+ r = dm_tm_new_block(ll->tm, &index_validator, &b);
+ if (r < 0)
+ return r;
+
+ memcpy(dm_block_data(b), &ll->mi_le, sizeof(ll->mi_le));
+ ll->bitmap_root = dm_block_location(b);
+
+ return dm_tm_unlock(ll->tm, b);
+}
+
+static int metadata_ll_open(struct ll_disk *ll)
+{
+ int r;
+ struct dm_block *block;
+
+ r = dm_tm_read_lock(ll->tm, ll->bitmap_root,
+ &index_validator, &block);
+ if (r)
+ return r;
+
+ memcpy(&ll->mi_le, dm_block_data(block), sizeof(ll->mi_le));
+ return dm_tm_unlock(ll->tm, block);
+}
+
+static dm_block_t metadata_ll_max_entries(struct ll_disk *ll)
+{
+ return MAX_METADATA_BITMAPS;
+}
+
+static int metadata_ll_commit(struct ll_disk *ll)
+{
+ int r, inc;
+ struct dm_block *b;
+
+ r = dm_tm_shadow_block(ll->tm, ll->bitmap_root, &index_validator, &b, &inc);
+ if (r)
+ return r;
+
+ memcpy(dm_block_data(b), &ll->mi_le, sizeof(ll->mi_le));
+ ll->bitmap_root = dm_block_location(b);
+
+ return dm_tm_unlock(ll->tm, b);
+}
+
+int sm_ll_new_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm)
+{
+ int r;
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = metadata_ll_load_ie;
+ ll->save_ie = metadata_ll_save_ie;
+ ll->init_index = metadata_ll_init_index;
+ ll->open_index = metadata_ll_open;
+ ll->max_entries = metadata_ll_max_entries;
+ ll->commit = metadata_ll_commit;
+
+ ll->nr_blocks = 0;
+ ll->nr_allocated = 0;
+
+ r = ll->init_index(ll);
+ if (r < 0)
+ return r;
+
+ r = dm_btree_empty(&ll->ref_count_info, &ll->ref_count_root);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+
+int sm_ll_open_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct disk_sm_root *smr = root_le;
+
+ if (len < sizeof(struct disk_sm_root)) {
+ DMERR("sm_metadata root too small");
+ return -ENOMEM;
+ }
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = metadata_ll_load_ie;
+ ll->save_ie = metadata_ll_save_ie;
+ ll->init_index = metadata_ll_init_index;
+ ll->open_index = metadata_ll_open;
+ ll->max_entries = metadata_ll_max_entries;
+ ll->commit = metadata_ll_commit;
+
+ ll->nr_blocks = le64_to_cpu(smr->nr_blocks);
+ ll->nr_allocated = le64_to_cpu(smr->nr_allocated);
+ ll->bitmap_root = le64_to_cpu(smr->bitmap_root);
+ ll->ref_count_root = le64_to_cpu(smr->ref_count_root);
+
+ return ll->open_index(ll);
+}
+
+/*----------------------------------------------------------------*/
+
+static int disk_ll_load_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ return dm_btree_lookup(&ll->bitmap_info, ll->bitmap_root, &index, ie);
+}
+
+static int disk_ll_save_ie(struct ll_disk *ll, dm_block_t index,
+ struct disk_index_entry *ie)
+{
+ __dm_bless_for_disk(ie);
+ return dm_btree_insert(&ll->bitmap_info, ll->bitmap_root,
+ &index, ie, &ll->bitmap_root);
+}
+
+static int disk_ll_init_index(struct ll_disk *ll)
+{
+ return dm_btree_empty(&ll->bitmap_info, &ll->bitmap_root);
+}
+
+static int disk_ll_open(struct ll_disk *ll)
+{
+ /* nothing to do */
+ return 0;
+}
+
+static dm_block_t disk_ll_max_entries(struct ll_disk *ll)
+{
+ return -1ULL;
+}
+
+static int disk_ll_commit(struct ll_disk *ll)
+{
+ return 0;
+}
+
+int sm_ll_new_disk(struct ll_disk *ll, struct dm_transaction_manager *tm)
+{
+ int r;
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = disk_ll_load_ie;
+ ll->save_ie = disk_ll_save_ie;
+ ll->init_index = disk_ll_init_index;
+ ll->open_index = disk_ll_open;
+ ll->max_entries = disk_ll_max_entries;
+ ll->commit = disk_ll_commit;
+
+ ll->nr_blocks = 0;
+ ll->nr_allocated = 0;
+
+ r = ll->init_index(ll);
+ if (r < 0)
+ return r;
+
+ r = dm_btree_empty(&ll->ref_count_info, &ll->ref_count_root);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+
+int sm_ll_open_disk(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct disk_sm_root *smr = root_le;
+
+ if (len < sizeof(struct disk_sm_root)) {
+ DMERR("sm_metadata root too small");
+ return -ENOMEM;
+ }
+
+ r = sm_ll_init(ll, tm);
+ if (r < 0)
+ return r;
+
+ ll->load_ie = disk_ll_load_ie;
+ ll->save_ie = disk_ll_save_ie;
+ ll->init_index = disk_ll_init_index;
+ ll->open_index = disk_ll_open;
+ ll->max_entries = disk_ll_max_entries;
+ ll->commit = disk_ll_commit;
+
+ ll->nr_blocks = le64_to_cpu(smr->nr_blocks);
+ ll->nr_allocated = le64_to_cpu(smr->nr_allocated);
+ ll->bitmap_root = le64_to_cpu(smr->bitmap_root);
+ ll->ref_count_root = le64_to_cpu(smr->ref_count_root);
+
+ return ll->open_index(ll);
+}
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-space-map-common.h b/drivers/md/persistent-data/dm-space-map-common.h
new file mode 100644
index 0000000..8f22082
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-common.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_SPACE_MAP_COMMON_H
+#define DM_SPACE_MAP_COMMON_H
+
+#include "dm-btree.h"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Low level disk format
+ *
+ * Bitmap btree
+ * ------------
+ *
+ * Each value stored in the btree is an index_entry. This points to a
+ * block that is used as a bitmap. Within the bitmap hold 2 bits per
+ * entry, which represent UNUSED = 0, REF_COUNT = 1, REF_COUNT = 2 and
+ * REF_COUNT = many.
+ *
+ * Refcount btree
+ * --------------
+ *
+ * Any entry that has a ref count higher than 2 gets entered in the ref
+ * count tree. The leaf values for this tree is the 32-bit ref count.
+ */
+
+struct disk_index_entry {
+ __le64 blocknr;
+ __le32 nr_free;
+ __le32 none_free_before;
+} __packed;
+
+
+#define MAX_METADATA_BITMAPS 255
+struct disk_metadata_index {
+ __le32 csum;
+ __le32 padding;
+ __le64 blocknr;
+
+ struct disk_index_entry index[MAX_METADATA_BITMAPS];
+} __packed;
+
+struct ll_disk;
+
+typedef int (*load_ie_fn)(struct ll_disk *ll, dm_block_t index, struct disk_index_entry *result);
+typedef int (*save_ie_fn)(struct ll_disk *ll, dm_block_t index, struct disk_index_entry *ie);
+typedef int (*init_index_fn)(struct ll_disk *ll);
+typedef int (*open_index_fn)(struct ll_disk *ll);
+typedef dm_block_t (*max_index_entries_fn)(struct ll_disk *ll);
+typedef int (*commit_fn)(struct ll_disk *ll);
+
+struct ll_disk {
+ struct dm_transaction_manager *tm;
+ struct dm_btree_info bitmap_info;
+ struct dm_btree_info ref_count_info;
+
+ uint32_t block_size;
+ uint32_t entries_per_block;
+ dm_block_t nr_blocks;
+ dm_block_t nr_allocated;
+
+ /*
+ * bitmap_root may be a btree root or a simple index.
+ */
+ dm_block_t bitmap_root;
+
+ dm_block_t ref_count_root;
+
+ struct disk_metadata_index mi_le;
+ load_ie_fn load_ie;
+ save_ie_fn save_ie;
+ init_index_fn init_index;
+ open_index_fn open_index;
+ max_index_entries_fn max_entries;
+ commit_fn commit;
+};
+
+struct disk_sm_root {
+ __le64 nr_blocks;
+ __le64 nr_allocated;
+ __le64 bitmap_root;
+ __le64 ref_count_root;
+} __packed;
+
+#define ENTRIES_PER_BYTE 4
+
+struct disk_bitmap_header {
+ __le32 csum;
+ __le32 not_used;
+ __le64 blocknr;
+} __packed;
+
+enum allocation_event {
+ SM_NONE,
+ SM_ALLOC,
+ SM_FREE,
+};
+
+/*----------------------------------------------------------------*/
+
+int sm_ll_extend(struct ll_disk *ll, dm_block_t extra_blocks);
+int sm_ll_lookup_bitmap(struct ll_disk *ll, dm_block_t b, uint32_t *result);
+int sm_ll_lookup(struct ll_disk *ll, dm_block_t b, uint32_t *result);
+int sm_ll_find_free_block(struct ll_disk *ll, dm_block_t begin,
+ dm_block_t end, dm_block_t *result);
+int sm_ll_insert(struct ll_disk *ll, dm_block_t b, uint32_t ref_count, enum allocation_event *ev);
+int sm_ll_inc(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev);
+int sm_ll_dec(struct ll_disk *ll, dm_block_t b, enum allocation_event *ev);
+int sm_ll_commit(struct ll_disk *ll);
+
+int sm_ll_new_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm);
+int sm_ll_open_metadata(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len);
+
+int sm_ll_new_disk(struct ll_disk *ll, struct dm_transaction_manager *tm);
+int sm_ll_open_disk(struct ll_disk *ll, struct dm_transaction_manager *tm,
+ void *root_le, size_t len);
+
+/*----------------------------------------------------------------*/
+
+#endif /* DM_SPACE_MAP_COMMON_H */
diff --git a/drivers/md/persistent-data/dm-space-map-disk.c b/drivers/md/persistent-data/dm-space-map-disk.c
new file mode 100644
index 0000000..aeff785
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-disk.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map-checker.h"
+#include "dm-space-map-common.h"
+#include "dm-space-map-disk.h"
+#include "dm-space-map.h"
+#include "dm-transaction-manager.h"
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "space map disk"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Space map interface.
+ */
+struct sm_disk {
+ struct dm_space_map sm;
+
+ struct ll_disk ll;
+ struct ll_disk old_ll;
+
+ dm_block_t begin;
+ dm_block_t nr_allocated_this_transaction;
+};
+
+static void sm_disk_destroy(struct dm_space_map *sm)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ kfree(smd);
+}
+
+static int sm_disk_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ return sm_ll_extend(&smd->ll, extra_blocks);
+}
+
+static int sm_disk_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ *count = smd->old_ll.nr_blocks;
+
+ return 0;
+}
+
+static int sm_disk_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ *count = (smd->old_ll.nr_blocks - smd->old_ll.nr_allocated) - smd->nr_allocated_this_transaction;
+
+ return 0;
+}
+
+static int sm_disk_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ return sm_ll_lookup(&smd->ll, b, result);
+}
+
+static int sm_disk_count_is_more_than_one(struct dm_space_map *sm, dm_block_t b,
+ int *result)
+{
+ int r;
+ uint32_t count;
+
+ r = sm_disk_get_count(sm, b, &count);
+ if (r)
+ return r;
+
+ return count > 1;
+}
+
+static int sm_disk_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ int r;
+ uint32_t old_count;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_ll_insert(&smd->ll, b, count, &ev);
+ if (!r) {
+ switch (ev) {
+ case SM_NONE:
+ break;
+
+ case SM_ALLOC:
+ /*
+ * This _must_ be free in the prior transaction
+ * otherwise we've lost atomicity.
+ */
+ smd->nr_allocated_this_transaction++;
+ break;
+
+ case SM_FREE:
+ /*
+ * It's only free if it's also free in the last
+ * transaction.
+ */
+ r = sm_ll_lookup(&smd->old_ll, b, &old_count);
+ if (r)
+ return r;
+
+ if (!old_count)
+ smd->nr_allocated_this_transaction--;
+ break;
+ }
+ }
+
+ return r;
+}
+
+static int sm_disk_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_ll_inc(&smd->ll, b, &ev);
+ if (!r && (ev == SM_ALLOC))
+ /*
+ * This _must_ be free in the prior transaction
+ * otherwise we've lost atomicity.
+ */
+ smd->nr_allocated_this_transaction++;
+
+ return r;
+}
+
+static int sm_disk_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r;
+ uint32_t old_count;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_ll_dec(&smd->ll, b, &ev);
+ if (!r && (ev == SM_FREE)) {
+ /*
+ * It's only free if it's also free in the last
+ * transaction.
+ */
+ r = sm_ll_lookup(&smd->old_ll, b, &old_count);
+ if (r)
+ return r;
+
+ if (!old_count)
+ smd->nr_allocated_this_transaction--;
+ }
+
+ return r;
+}
+
+static int sm_disk_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ int r;
+ enum allocation_event ev;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ /* FIXME: we should loop round a couple of times */
+ r = sm_ll_find_free_block(&smd->old_ll, smd->begin, smd->old_ll.nr_blocks, b);
+ if (r)
+ return r;
+
+ smd->begin = *b + 1;
+ r = sm_ll_inc(&smd->ll, *b, &ev);
+ if (!r) {
+ BUG_ON(ev != SM_ALLOC);
+ smd->nr_allocated_this_transaction++;
+ }
+
+ return r;
+}
+
+static int sm_disk_commit(struct dm_space_map *sm)
+{
+ int r;
+ dm_block_t nr_free;
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+
+ r = sm_disk_get_nr_free(sm, &nr_free);
+ if (r)
+ return r;
+
+ r = sm_ll_commit(&smd->ll);
+ if (r)
+ return r;
+
+ memcpy(&smd->old_ll, &smd->ll, sizeof(smd->old_ll));
+ smd->begin = 0;
+ smd->nr_allocated_this_transaction = 0;
+
+ r = sm_disk_get_nr_free(sm, &nr_free);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int sm_disk_root_size(struct dm_space_map *sm, size_t *result)
+{
+ *result = sizeof(struct disk_sm_root);
+
+ return 0;
+}
+
+static int sm_disk_copy_root(struct dm_space_map *sm, void *where_le, size_t max)
+{
+ struct sm_disk *smd = container_of(sm, struct sm_disk, sm);
+ struct disk_sm_root root_le;
+
+ root_le.nr_blocks = cpu_to_le64(smd->ll.nr_blocks);
+ root_le.nr_allocated = cpu_to_le64(smd->ll.nr_allocated);
+ root_le.bitmap_root = cpu_to_le64(smd->ll.bitmap_root);
+ root_le.ref_count_root = cpu_to_le64(smd->ll.ref_count_root);
+
+ if (max < sizeof(root_le))
+ return -ENOSPC;
+
+ memcpy(where_le, &root_le, sizeof(root_le));
+
+ return 0;
+}
+
+/*----------------------------------------------------------------*/
+
+static struct dm_space_map ops = {
+ .destroy = sm_disk_destroy,
+ .extend = sm_disk_extend,
+ .get_nr_blocks = sm_disk_get_nr_blocks,
+ .get_nr_free = sm_disk_get_nr_free,
+ .get_count = sm_disk_get_count,
+ .count_is_more_than_one = sm_disk_count_is_more_than_one,
+ .set_count = sm_disk_set_count,
+ .inc_block = sm_disk_inc_block,
+ .dec_block = sm_disk_dec_block,
+ .new_block = sm_disk_new_block,
+ .commit = sm_disk_commit,
+ .root_size = sm_disk_root_size,
+ .copy_root = sm_disk_copy_root
+};
+
+static struct dm_space_map *dm_sm_disk_create_real(
+ struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks)
+{
+ int r;
+ struct sm_disk *smd;
+
+ smd = kmalloc(sizeof(*smd), GFP_KERNEL);
+ if (!smd)
+ return ERR_PTR(-ENOMEM);
+
+ smd->begin = 0;
+ smd->nr_allocated_this_transaction = 0;
+ memcpy(&smd->sm, &ops, sizeof(smd->sm));
+
+ r = sm_ll_new_disk(&smd->ll, tm);
+ if (r)
+ goto bad;
+
+ r = sm_ll_extend(&smd->ll, nr_blocks);
+ if (r)
+ goto bad;
+
+ r = sm_disk_commit(&smd->sm);
+ if (r)
+ goto bad;
+
+ return &smd->sm;
+
+bad:
+ kfree(smd);
+ return ERR_PTR(r);
+}
+
+struct dm_space_map *dm_sm_disk_create(struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks)
+{
+ struct dm_space_map *sm = dm_sm_disk_create_real(tm, nr_blocks);
+ return dm_sm_checker_create_fresh(sm);
+}
+EXPORT_SYMBOL_GPL(dm_sm_disk_create);
+
+static struct dm_space_map *dm_sm_disk_open_real(
+ struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct sm_disk *smd;
+
+ smd = kmalloc(sizeof(*smd), GFP_KERNEL);
+ if (!smd)
+ return ERR_PTR(-ENOMEM);
+
+ smd->begin = 0;
+ smd->nr_allocated_this_transaction = 0;
+ memcpy(&smd->sm, &ops, sizeof(smd->sm));
+
+ r = sm_ll_open_disk(&smd->ll, tm, root_le, len);
+ if (r)
+ goto bad;
+
+ r = sm_disk_commit(&smd->sm);
+ if (r)
+ goto bad;
+
+ return &smd->sm;
+
+bad:
+ kfree(smd);
+ return ERR_PTR(r);
+}
+
+struct dm_space_map *dm_sm_disk_open(struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ return dm_sm_checker_create(
+ dm_sm_disk_open_real(tm, root_le, len));
+}
+EXPORT_SYMBOL_GPL(dm_sm_disk_open);
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-space-map-disk.h b/drivers/md/persistent-data/dm-space-map-disk.h
new file mode 100644
index 0000000..447a0a9
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-disk.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_SPACE_MAP_DISK_H
+#define _LINUX_DM_SPACE_MAP_DISK_H
+
+#include "dm-block-manager.h"
+
+struct dm_space_map;
+struct dm_transaction_manager;
+
+/*
+ * Unfortunately we have to use two-phase construction due to the cycle
+ * between the tm and sm.
+ */
+struct dm_space_map *dm_sm_disk_create(struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks);
+
+struct dm_space_map *dm_sm_disk_open(struct dm_transaction_manager *tm,
+ void *root, size_t len);
+
+#endif /* _LINUX_DM_SPACE_MAP_DISK_H */
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.c b/drivers/md/persistent-data/dm-space-map-metadata.c
new file mode 100644
index 0000000..e89ae5e
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -0,0 +1,596 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#include "dm-space-map.h"
+#include "dm-space-map-common.h"
+#include "dm-space-map-metadata.h"
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "space map metadata"
+
+/*----------------------------------------------------------------*/
+
+/*
+ * Space map interface.
+ *
+ * The low level disk format is written using the standard btree and
+ * transaction manager. This means that performing disk operations may
+ * cause us to recurse into the space map in order to allocate new blocks.
+ * For this reason we have a pool of pre-allocated blocks large enough to
+ * service any metadata_ll_disk operation.
+ */
+
+/*
+ * FIXME: we should calculate this based on the size of the device.
+ * Only the metadata space map needs this functionality.
+ */
+#define MAX_RECURSIVE_ALLOCATIONS 1024
+
+enum block_op_type {
+ BOP_INC,
+ BOP_DEC
+};
+
+struct block_op {
+ enum block_op_type type;
+ dm_block_t block;
+};
+
+struct sm_metadata {
+ struct dm_space_map sm;
+
+ struct ll_disk ll;
+ struct ll_disk old_ll;
+
+ dm_block_t begin;
+
+ unsigned recursion_count;
+ unsigned allocated_this_transaction;
+ unsigned nr_uncommitted;
+ struct block_op uncommitted[MAX_RECURSIVE_ALLOCATIONS];
+};
+
+static int add_bop(struct sm_metadata *smm, enum block_op_type type, dm_block_t b)
+{
+ struct block_op *op;
+
+ if (smm->nr_uncommitted == MAX_RECURSIVE_ALLOCATIONS) {
+ DMERR("too many recursive allocations");
+ return -ENOMEM;
+ }
+
+ op = smm->uncommitted + smm->nr_uncommitted++;
+ op->type = type;
+ op->block = b;
+
+ return 0;
+}
+
+static int commit_bop(struct sm_metadata *smm, struct block_op *op)
+{
+ int r = 0;
+ enum allocation_event ev;
+
+ switch (op->type) {
+ case BOP_INC:
+ r = sm_ll_inc(&smm->ll, op->block, &ev);
+ break;
+
+ case BOP_DEC:
+ r = sm_ll_dec(&smm->ll, op->block, &ev);
+ break;
+ }
+
+ return r;
+}
+
+static void in(struct sm_metadata *smm)
+{
+ smm->recursion_count++;
+}
+
+static int out(struct sm_metadata *smm)
+{
+ int r = 0;
+
+ /*
+ * If we're not recursing then very bad things are happening.
+ */
+ if (!smm->recursion_count) {
+ DMERR("lost track of recursion depth");
+ return -ENOMEM;
+ }
+
+ if (smm->recursion_count == 1 && smm->nr_uncommitted) {
+ while (smm->nr_uncommitted && !r) {
+ smm->nr_uncommitted--;
+ r = commit_bop(smm, smm->uncommitted +
+ smm->nr_uncommitted);
+ if (r)
+ break;
+ }
+ }
+
+ smm->recursion_count--;
+
+ return r;
+}
+
+/*
+ * When using the out() function above, we often want to combine an error
+ * code for the operation run in the recursive context with that from
+ * out().
+ */
+static int combine_errors(int r1, int r2)
+{
+ return r1 ? r1 : r2;
+}
+
+static int recursing(struct sm_metadata *smm)
+{
+ return smm->recursion_count;
+}
+
+static void sm_metadata_destroy(struct dm_space_map *sm)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ kfree(smm);
+}
+
+static int sm_metadata_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ DMERR("doesn't support extend");
+ return -EINVAL;
+}
+
+static int sm_metadata_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ *count = smm->ll.nr_blocks;
+
+ return 0;
+}
+
+static int sm_metadata_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ *count = smm->old_ll.nr_blocks - smm->old_ll.nr_allocated -
+ smm->allocated_this_transaction;
+
+ return 0;
+}
+
+static int sm_metadata_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ int r, i;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+ unsigned adjustment = 0;
+
+ /*
+ * We may have some uncommitted adjustments to add. This list
+ * should always be really short.
+ */
+ for (i = 0; i < smm->nr_uncommitted; i++) {
+ struct block_op *op = smm->uncommitted + i;
+
+ if (op->block != b)
+ continue;
+
+ switch (op->type) {
+ case BOP_INC:
+ adjustment++;
+ break;
+
+ case BOP_DEC:
+ adjustment--;
+ break;
+ }
+ }
+
+ r = sm_ll_lookup(&smm->ll, b, result);
+ if (r)
+ return r;
+
+ *result += adjustment;
+
+ return 0;
+}
+
+static int sm_metadata_count_is_more_than_one(struct dm_space_map *sm,
+ dm_block_t b, int *result)
+{
+ int r, i, adjustment = 0;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+ uint32_t rc;
+
+ /*
+ * We may have some uncommitted adjustments to add. This list
+ * should always be really short.
+ */
+ for (i = 0; i < smm->nr_uncommitted; i++) {
+ struct block_op *op = smm->uncommitted + i;
+
+ if (op->block != b)
+ continue;
+
+ switch (op->type) {
+ case BOP_INC:
+ adjustment++;
+ break;
+
+ case BOP_DEC:
+ adjustment--;
+ break;
+ }
+ }
+
+ if (adjustment > 1) {
+ *result = 1;
+ return 0;
+ }
+
+ r = sm_ll_lookup_bitmap(&smm->ll, b, &rc);
+ if (r)
+ return r;
+
+ if (rc == 3)
+ /*
+ * We err on the side of caution, and always return true.
+ */
+ *result = 1;
+ else
+ *result = rc + adjustment > 1;
+
+ return 0;
+}
+
+static int sm_metadata_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ int r, r2;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ if (smm->recursion_count) {
+ DMERR("cannot recurse set_count()");
+ return -EINVAL;
+ }
+
+ in(smm);
+ r = sm_ll_insert(&smm->ll, b, count, &ev);
+ r2 = out(smm);
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r, r2 = 0;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ if (recursing(smm))
+ r = add_bop(smm, BOP_INC, b);
+ else {
+ in(smm);
+ r = sm_ll_inc(&smm->ll, b, &ev);
+ r2 = out(smm);
+ }
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ int r, r2 = 0;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ if (recursing(smm))
+ r = add_bop(smm, BOP_DEC, b);
+ else {
+ in(smm);
+ r = sm_ll_dec(&smm->ll, b, &ev);
+ r2 = out(smm);
+ }
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_new_block_(struct dm_space_map *sm, dm_block_t *b)
+{
+ int r, r2 = 0;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ r = sm_ll_find_free_block(&smm->old_ll, smm->begin, smm->old_ll.nr_blocks, b);
+ if (r)
+ return r;
+
+ smm->begin = *b + 1;
+
+ if (recursing(smm))
+ r = add_bop(smm, BOP_INC, *b);
+ else {
+ in(smm);
+ r = sm_ll_inc(&smm->ll, *b, &ev);
+ r2 = out(smm);
+ }
+
+ if (!r)
+ smm->allocated_this_transaction++;
+
+ return combine_errors(r, r2);
+}
+
+static int sm_metadata_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ int r = sm_metadata_new_block_(sm, b);
+ if (r)
+ DMERR("out of metadata space");
+ return r;
+}
+
+static int sm_metadata_commit(struct dm_space_map *sm)
+{
+ int r;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ r = sm_ll_commit(&smm->ll);
+ if (r)
+ return r;
+
+ memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll));
+ smm->begin = 0;
+ smm->allocated_this_transaction = 0;
+
+ return 0;
+}
+
+static int sm_metadata_root_size(struct dm_space_map *sm, size_t *result)
+{
+ *result = sizeof(struct disk_sm_root);
+
+ return 0;
+}
+
+static int sm_metadata_copy_root(struct dm_space_map *sm, void *where_le, size_t max)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+ struct disk_sm_root root_le;
+
+ root_le.nr_blocks = cpu_to_le64(smm->ll.nr_blocks);
+ root_le.nr_allocated = cpu_to_le64(smm->ll.nr_allocated);
+ root_le.bitmap_root = cpu_to_le64(smm->ll.bitmap_root);
+ root_le.ref_count_root = cpu_to_le64(smm->ll.ref_count_root);
+
+ if (max < sizeof(root_le))
+ return -ENOSPC;
+
+ memcpy(where_le, &root_le, sizeof(root_le));
+
+ return 0;
+}
+
+static struct dm_space_map ops = {
+ .destroy = sm_metadata_destroy,
+ .extend = sm_metadata_extend,
+ .get_nr_blocks = sm_metadata_get_nr_blocks,
+ .get_nr_free = sm_metadata_get_nr_free,
+ .get_count = sm_metadata_get_count,
+ .count_is_more_than_one = sm_metadata_count_is_more_than_one,
+ .set_count = sm_metadata_set_count,
+ .inc_block = sm_metadata_inc_block,
+ .dec_block = sm_metadata_dec_block,
+ .new_block = sm_metadata_new_block,
+ .commit = sm_metadata_commit,
+ .root_size = sm_metadata_root_size,
+ .copy_root = sm_metadata_copy_root
+};
+
+/*----------------------------------------------------------------*/
+
+/*
+ * When a new space map is created that manages its own space. We use
+ * this tiny bootstrap allocator.
+ */
+static void sm_bootstrap_destroy(struct dm_space_map *sm)
+{
+}
+
+static int sm_bootstrap_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ DMERR("boostrap doesn't support extend");
+
+ return -EINVAL;
+}
+
+static int sm_bootstrap_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return smm->ll.nr_blocks;
+}
+
+static int sm_bootstrap_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ *count = smm->ll.nr_blocks - smm->begin;
+
+ return 0;
+}
+
+static int sm_bootstrap_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return b < smm->begin ? 1 : 0;
+}
+
+static int sm_bootstrap_count_is_more_than_one(struct dm_space_map *sm,
+ dm_block_t b, int *result)
+{
+ *result = 0;
+
+ return 0;
+}
+
+static int sm_bootstrap_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ DMERR("boostrap doesn't support set_count");
+
+ return -EINVAL;
+}
+
+static int sm_bootstrap_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ /*
+ * We know the entire device is unused.
+ */
+ if (smm->begin == smm->ll.nr_blocks)
+ return -ENOSPC;
+
+ *b = smm->begin++;
+
+ return 0;
+}
+
+static int sm_bootstrap_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return add_bop(smm, BOP_INC, b);
+}
+
+static int sm_bootstrap_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ return add_bop(smm, BOP_DEC, b);
+}
+
+static int sm_bootstrap_commit(struct dm_space_map *sm)
+{
+ return 0;
+}
+
+static int sm_bootstrap_root_size(struct dm_space_map *sm, size_t *result)
+{
+ DMERR("boostrap doesn't support root_size");
+
+ return -EINVAL;
+}
+
+static int sm_bootstrap_copy_root(struct dm_space_map *sm, void *where,
+ size_t max)
+{
+ DMERR("boostrap doesn't support copy_root");
+
+ return -EINVAL;
+}
+
+static struct dm_space_map bootstrap_ops = {
+ .destroy = sm_bootstrap_destroy,
+ .extend = sm_bootstrap_extend,
+ .get_nr_blocks = sm_bootstrap_get_nr_blocks,
+ .get_nr_free = sm_bootstrap_get_nr_free,
+ .get_count = sm_bootstrap_get_count,
+ .count_is_more_than_one = sm_bootstrap_count_is_more_than_one,
+ .set_count = sm_bootstrap_set_count,
+ .inc_block = sm_bootstrap_inc_block,
+ .dec_block = sm_bootstrap_dec_block,
+ .new_block = sm_bootstrap_new_block,
+ .commit = sm_bootstrap_commit,
+ .root_size = sm_bootstrap_root_size,
+ .copy_root = sm_bootstrap_copy_root
+};
+
+/*----------------------------------------------------------------*/
+
+struct dm_space_map *dm_sm_metadata_init(void)
+{
+ struct sm_metadata *smm;
+
+ smm = kmalloc(sizeof(*smm), GFP_KERNEL);
+ if (!smm)
+ return ERR_PTR(-ENOMEM);
+
+ memcpy(&smm->sm, &ops, sizeof(smm->sm));
+
+ return &smm->sm;
+}
+
+int dm_sm_metadata_create(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks,
+ dm_block_t superblock)
+{
+ int r;
+ dm_block_t i;
+ enum allocation_event ev;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ smm->begin = superblock + 1;
+ smm->recursion_count = 0;
+ smm->allocated_this_transaction = 0;
+ smm->nr_uncommitted = 0;
+
+ memcpy(&smm->sm, &bootstrap_ops, sizeof(smm->sm));
+
+ r = sm_ll_new_metadata(&smm->ll, tm);
+ if (r)
+ return r;
+
+ r = sm_ll_extend(&smm->ll, nr_blocks);
+ if (r)
+ return r;
+
+ memcpy(&smm->sm, &ops, sizeof(smm->sm));
+
+ /*
+ * Now we need to update the newly created data structures with the
+ * allocated blocks that they were built from.
+ */
+ for (i = superblock; !r && i < smm->begin; i++)
+ r = sm_ll_inc(&smm->ll, i, &ev);
+
+ if (r)
+ return r;
+
+ return sm_metadata_commit(sm);
+}
+
+int dm_sm_metadata_open(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ void *root_le, size_t len)
+{
+ int r;
+ struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
+
+ r = sm_ll_open_metadata(&smm->ll, tm, root_le, len);
+ if (r)
+ return r;
+
+ smm->begin = 0;
+ smm->recursion_count = 0;
+ smm->allocated_this_transaction = 0;
+ smm->nr_uncommitted = 0;
+
+ memcpy(&smm->old_ll, &smm->ll, sizeof(smm->old_ll));
+ return 0;
+}
diff --git a/drivers/md/persistent-data/dm-space-map-metadata.h b/drivers/md/persistent-data/dm-space-map-metadata.h
new file mode 100644
index 0000000..39bba08
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map-metadata.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef DM_SPACE_MAP_METADATA_H
+#define DM_SPACE_MAP_METADATA_H
+
+#include "dm-transaction-manager.h"
+
+/*
+ * Unfortunately we have to use two-phase construction due to the cycle
+ * between the tm and sm.
+ */
+struct dm_space_map *dm_sm_metadata_init(void);
+
+/*
+ * Create a fresh space map.
+ */
+int dm_sm_metadata_create(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ dm_block_t nr_blocks,
+ dm_block_t superblock);
+
+/*
+ * Open from a previously-recorded root.
+ */
+int dm_sm_metadata_open(struct dm_space_map *sm,
+ struct dm_transaction_manager *tm,
+ void *root_le, size_t len);
+
+#endif /* DM_SPACE_MAP_METADATA_H */
diff --git a/drivers/md/persistent-data/dm-space-map.h b/drivers/md/persistent-data/dm-space-map.h
new file mode 100644
index 0000000..1cbfc6b
--- /dev/null
+++ b/drivers/md/persistent-data/dm-space-map.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_SPACE_MAP_H
+#define _LINUX_DM_SPACE_MAP_H
+
+#include "dm-block-manager.h"
+
+/*
+ * struct dm_space_map keeps a record of how many times each block in a device
+ * is referenced. It needs to be fixed on disk as part of the transaction.
+ */
+struct dm_space_map {
+ void (*destroy)(struct dm_space_map *sm);
+
+ /*
+ * You must commit before allocating the newly added space.
+ */
+ int (*extend)(struct dm_space_map *sm, dm_block_t extra_blocks);
+
+ /*
+ * Extensions do not appear in this count until after commit has
+ * been called.
+ */
+ int (*get_nr_blocks)(struct dm_space_map *sm, dm_block_t *count);
+
+ /*
+ * Space maps must never allocate a block from the previous
+ * transaction, in case we need to rollback. This complicates the
+ * semantics of get_nr_free(), it should return the number of blocks
+ * that are available for allocation _now_. For instance you may
+ * have blocks with a zero reference count that will not be
+ * available for allocation until after the next commit.
+ */
+ int (*get_nr_free)(struct dm_space_map *sm, dm_block_t *count);
+
+ int (*get_count)(struct dm_space_map *sm, dm_block_t b, uint32_t *result);
+ int (*count_is_more_than_one)(struct dm_space_map *sm, dm_block_t b,
+ int *result);
+ int (*set_count)(struct dm_space_map *sm, dm_block_t b, uint32_t count);
+
+ int (*commit)(struct dm_space_map *sm);
+
+ int (*inc_block)(struct dm_space_map *sm, dm_block_t b);
+ int (*dec_block)(struct dm_space_map *sm, dm_block_t b);
+
+ /*
+ * new_block will increment the returned block.
+ */
+ int (*new_block)(struct dm_space_map *sm, dm_block_t *b);
+
+ /*
+ * The root contains all the information needed to fix the space map.
+ * Generally this info is small, so squirrel it away in a disk block
+ * along with other info.
+ */
+ int (*root_size)(struct dm_space_map *sm, size_t *result);
+ int (*copy_root)(struct dm_space_map *sm, void *copy_to_here_le, size_t len);
+};
+
+/*----------------------------------------------------------------*/
+
+static inline void dm_sm_destroy(struct dm_space_map *sm)
+{
+ sm->destroy(sm);
+}
+
+static inline int dm_sm_extend(struct dm_space_map *sm, dm_block_t extra_blocks)
+{
+ return sm->extend(sm, extra_blocks);
+}
+
+static inline int dm_sm_get_nr_blocks(struct dm_space_map *sm, dm_block_t *count)
+{
+ return sm->get_nr_blocks(sm, count);
+}
+
+static inline int dm_sm_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
+{
+ return sm->get_nr_free(sm, count);
+}
+
+static inline int dm_sm_get_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t *result)
+{
+ return sm->get_count(sm, b, result);
+}
+
+static inline int dm_sm_count_is_more_than_one(struct dm_space_map *sm,
+ dm_block_t b, int *result)
+{
+ return sm->count_is_more_than_one(sm, b, result);
+}
+
+static inline int dm_sm_set_count(struct dm_space_map *sm, dm_block_t b,
+ uint32_t count)
+{
+ return sm->set_count(sm, b, count);
+}
+
+static inline int dm_sm_commit(struct dm_space_map *sm)
+{
+ return sm->commit(sm);
+}
+
+static inline int dm_sm_inc_block(struct dm_space_map *sm, dm_block_t b)
+{
+ return sm->inc_block(sm, b);
+}
+
+static inline int dm_sm_dec_block(struct dm_space_map *sm, dm_block_t b)
+{
+ return sm->dec_block(sm, b);
+}
+
+static inline int dm_sm_new_block(struct dm_space_map *sm, dm_block_t *b)
+{
+ return sm->new_block(sm, b);
+}
+
+static inline int dm_sm_root_size(struct dm_space_map *sm, size_t *result)
+{
+ return sm->root_size(sm, result);
+}
+
+static inline int dm_sm_copy_root(struct dm_space_map *sm, void *copy_to_here_le, size_t len)
+{
+ return sm->copy_root(sm, copy_to_here_le, len);
+}
+
+#endif /* _LINUX_DM_SPACE_MAP_H */
diff --git a/drivers/md/persistent-data/dm-transaction-manager.c b/drivers/md/persistent-data/dm-transaction-manager.c
new file mode 100644
index 0000000..728e89a
--- /dev/null
+++ b/drivers/md/persistent-data/dm-transaction-manager.c
@@ -0,0 +1,400 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+#include "dm-transaction-manager.h"
+#include "dm-space-map.h"
+#include "dm-space-map-checker.h"
+#include "dm-space-map-disk.h"
+#include "dm-space-map-metadata.h"
+#include "dm-persistent-data-internal.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device-mapper.h>
+
+#define DM_MSG_PREFIX "transaction manager"
+
+/*----------------------------------------------------------------*/
+
+struct shadow_info {
+ struct hlist_node hlist;
+ dm_block_t where;
+};
+
+/*
+ * It would be nice if we scaled with the size of transaction.
+ */
+#define HASH_SIZE 256
+#define HASH_MASK (HASH_SIZE - 1)
+
+struct dm_transaction_manager {
+ int is_clone;
+ struct dm_transaction_manager *real;
+
+ struct dm_block_manager *bm;
+ struct dm_space_map *sm;
+
+ spinlock_t lock;
+ struct hlist_head buckets[HASH_SIZE];
+};
+
+/*----------------------------------------------------------------*/
+
+static int is_shadow(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ int r = 0;
+ unsigned bucket = dm_hash_block(b, HASH_MASK);
+ struct shadow_info *si;
+ struct hlist_node *n;
+
+ spin_lock(&tm->lock);
+ hlist_for_each_entry(si, n, tm->buckets + bucket, hlist)
+ if (si->where == b) {
+ r = 1;
+ break;
+ }
+ spin_unlock(&tm->lock);
+
+ return r;
+}
+
+/*
+ * This can silently fail if there's no memory. We're ok with this since
+ * creating redundant shadows causes no harm.
+ */
+static void insert_shadow(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ unsigned bucket;
+ struct shadow_info *si;
+
+ si = kmalloc(sizeof(*si), GFP_NOIO);
+ if (si) {
+ si->where = b;
+ bucket = dm_hash_block(b, HASH_MASK);
+ spin_lock(&tm->lock);
+ hlist_add_head(&si->hlist, tm->buckets + bucket);
+ spin_unlock(&tm->lock);
+ }
+}
+
+static void wipe_shadow_table(struct dm_transaction_manager *tm)
+{
+ struct shadow_info *si;
+ struct hlist_node *n, *tmp;
+ struct hlist_head *bucket;
+ int i;
+
+ spin_lock(&tm->lock);
+ for (i = 0; i < HASH_SIZE; i++) {
+ bucket = tm->buckets + i;
+ hlist_for_each_entry_safe(si, n, tmp, bucket, hlist)
+ kfree(si);
+
+ INIT_HLIST_HEAD(bucket);
+ }
+
+ spin_unlock(&tm->lock);
+}
+
+/*----------------------------------------------------------------*/
+
+static struct dm_transaction_manager *dm_tm_create(struct dm_block_manager *bm,
+ struct dm_space_map *sm)
+{
+ int i;
+ struct dm_transaction_manager *tm;
+
+ tm = kmalloc(sizeof(*tm), GFP_KERNEL);
+ if (!tm)
+ return ERR_PTR(-ENOMEM);
+
+ tm->is_clone = 0;
+ tm->real = NULL;
+ tm->bm = bm;
+ tm->sm = sm;
+
+ spin_lock_init(&tm->lock);
+ for (i = 0; i < HASH_SIZE; i++)
+ INIT_HLIST_HEAD(tm->buckets + i);
+
+ return tm;
+}
+
+struct dm_transaction_manager *dm_tm_create_non_blocking_clone(struct dm_transaction_manager *real)
+{
+ struct dm_transaction_manager *tm;
+
+ tm = kmalloc(sizeof(*tm), GFP_KERNEL);
+ if (tm) {
+ tm->is_clone = 1;
+ tm->real = real;
+ }
+
+ return tm;
+}
+EXPORT_SYMBOL_GPL(dm_tm_create_non_blocking_clone);
+
+void dm_tm_destroy(struct dm_transaction_manager *tm)
+{
+ kfree(tm);
+}
+EXPORT_SYMBOL_GPL(dm_tm_destroy);
+
+int dm_tm_pre_commit(struct dm_transaction_manager *tm)
+{
+ int r;
+
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ r = dm_sm_commit(tm->sm);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dm_tm_pre_commit);
+
+int dm_tm_commit(struct dm_transaction_manager *tm, struct dm_block *root)
+{
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ wipe_shadow_table(tm);
+
+ return dm_bm_flush_and_unlock(tm->bm, root);
+}
+EXPORT_SYMBOL_GPL(dm_tm_commit);
+
+int dm_tm_new_block(struct dm_transaction_manager *tm,
+ struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ int r;
+ dm_block_t new_block;
+
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ r = dm_sm_new_block(tm->sm, &new_block);
+ if (r < 0)
+ return r;
+
+ r = dm_bm_write_lock_zero(tm->bm, new_block, v, result);
+ if (r < 0) {
+ dm_sm_dec_block(tm->sm, new_block);
+ return r;
+ }
+
+ /*
+ * New blocks count as shadows in that they don't need to be
+ * shadowed again.
+ */
+ insert_shadow(tm, new_block);
+
+ return 0;
+}
+
+static int __shadow_block(struct dm_transaction_manager *tm, dm_block_t orig,
+ struct dm_block_validator *v,
+ struct dm_block **result)
+{
+ int r;
+ dm_block_t new;
+ struct dm_block *orig_block;
+
+ r = dm_sm_new_block(tm->sm, &new);
+ if (r < 0)
+ return r;
+
+ r = dm_sm_dec_block(tm->sm, orig);
+ if (r < 0)
+ return r;
+
+ r = dm_bm_read_lock(tm->bm, orig, v, &orig_block);
+ if (r < 0)
+ return r;
+
+ r = dm_bm_unlock_move(orig_block, new);
+ if (r < 0) {
+ dm_bm_unlock(orig_block);
+ return r;
+ }
+
+ return dm_bm_write_lock(tm->bm, new, v, result);
+}
+
+int dm_tm_shadow_block(struct dm_transaction_manager *tm, dm_block_t orig,
+ struct dm_block_validator *v, struct dm_block **result,
+ int *inc_children)
+{
+ int r;
+
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ r = dm_sm_count_is_more_than_one(tm->sm, orig, inc_children);
+ if (r < 0)
+ return r;
+
+ if (is_shadow(tm, orig) && !*inc_children)
+ return dm_bm_write_lock(tm->bm, orig, v, result);
+
+ r = __shadow_block(tm, orig, v, result);
+ if (r < 0)
+ return r;
+ insert_shadow(tm, dm_block_location(*result));
+
+ return r;
+}
+
+int dm_tm_read_lock(struct dm_transaction_manager *tm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **blk)
+{
+ if (tm->is_clone)
+ return dm_bm_read_try_lock(tm->real->bm, b, v, blk);
+
+ return dm_bm_read_lock(tm->bm, b, v, blk);
+}
+
+int dm_tm_unlock(struct dm_transaction_manager *tm, struct dm_block *b)
+{
+ return dm_bm_unlock(b);
+}
+EXPORT_SYMBOL_GPL(dm_tm_unlock);
+
+void dm_tm_inc(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ /*
+ * The non-blocking clone doesn't support this.
+ */
+ BUG_ON(tm->is_clone);
+
+ dm_sm_inc_block(tm->sm, b);
+}
+EXPORT_SYMBOL_GPL(dm_tm_inc);
+
+void dm_tm_dec(struct dm_transaction_manager *tm, dm_block_t b)
+{
+ /*
+ * The non-blocking clone doesn't support this.
+ */
+ BUG_ON(tm->is_clone);
+
+ dm_sm_dec_block(tm->sm, b);
+}
+EXPORT_SYMBOL_GPL(dm_tm_dec);
+
+int dm_tm_ref(struct dm_transaction_manager *tm, dm_block_t b,
+ uint32_t *result)
+{
+ if (tm->is_clone)
+ return -EWOULDBLOCK;
+
+ return dm_sm_get_count(tm->sm, b, result);
+}
+
+struct dm_block_manager *dm_tm_get_bm(struct dm_transaction_manager *tm)
+{
+ return tm->bm;
+}
+
+/*----------------------------------------------------------------*/
+
+static int dm_tm_create_internal(struct dm_block_manager *bm,
+ dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ size_t root_offset, size_t root_max_len,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm,
+ struct dm_block **sblock,
+ int create)
+{
+ int r;
+ struct dm_space_map *inner;
+
+ inner = dm_sm_metadata_init();
+ if (IS_ERR(inner))
+ return PTR_ERR(inner);
+
+ *tm = dm_tm_create(bm, inner);
+ if (IS_ERR(*tm)) {
+ dm_sm_destroy(inner);
+ return PTR_ERR(*tm);
+ }
+
+ if (create) {
+ r = dm_bm_write_lock_zero(dm_tm_get_bm(*tm), sb_location,
+ sb_validator, sblock);
+ if (r < 0) {
+ DMERR("couldn't lock superblock");
+ goto bad1;
+ }
+
+ r = dm_sm_metadata_create(inner, *tm, dm_bm_nr_blocks(bm),
+ sb_location);
+ if (r) {
+ DMERR("couldn't create metadata space map");
+ goto bad2;
+ }
+
+ *sm = dm_sm_checker_create(inner);
+ if (!*sm)
+ goto bad2;
+
+ } else {
+ r = dm_bm_write_lock(dm_tm_get_bm(*tm), sb_location,
+ sb_validator, sblock);
+ if (r < 0) {
+ DMERR("couldn't lock superblock");
+ goto bad1;
+ }
+
+ r = dm_sm_metadata_open(inner, *tm,
+ dm_block_data(*sblock) + root_offset,
+ root_max_len);
+ if (r) {
+ DMERR("couldn't open metadata space map");
+ goto bad2;
+ }
+
+ *sm = dm_sm_checker_create(inner);
+ if (!*sm)
+ goto bad2;
+ }
+
+ return 0;
+
+bad2:
+ dm_tm_unlock(*tm, *sblock);
+bad1:
+ dm_tm_destroy(*tm);
+ dm_sm_destroy(inner);
+ return r;
+}
+
+int dm_tm_create_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock)
+{
+ return dm_tm_create_internal(bm, sb_location, sb_validator,
+ 0, 0, tm, sm, sblock, 1);
+}
+EXPORT_SYMBOL_GPL(dm_tm_create_with_sm);
+
+int dm_tm_open_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ size_t root_offset, size_t root_max_len,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock)
+{
+ return dm_tm_create_internal(bm, sb_location, sb_validator, root_offset,
+ root_max_len, tm, sm, sblock, 0);
+}
+EXPORT_SYMBOL_GPL(dm_tm_open_with_sm);
+
+/*----------------------------------------------------------------*/
diff --git a/drivers/md/persistent-data/dm-transaction-manager.h b/drivers/md/persistent-data/dm-transaction-manager.h
new file mode 100644
index 0000000..6da7848
--- /dev/null
+++ b/drivers/md/persistent-data/dm-transaction-manager.h
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc.
+ *
+ * This file is released under the GPL.
+ */
+
+#ifndef _LINUX_DM_TRANSACTION_MANAGER_H
+#define _LINUX_DM_TRANSACTION_MANAGER_H
+
+#include "dm-block-manager.h"
+
+struct dm_transaction_manager;
+struct dm_space_map;
+
+/*----------------------------------------------------------------*/
+
+/*
+ * This manages the scope of a transaction. It also enforces immutability
+ * of the on-disk data structures by limiting access to writeable blocks.
+ *
+ * Clients should not fiddle with the block manager directly.
+ */
+
+void dm_tm_destroy(struct dm_transaction_manager *tm);
+
+/*
+ * The non-blocking version of a transaction manager is intended for use in
+ * fast path code that needs to do lookups e.g. a dm mapping function.
+ * You create the non-blocking variant from a normal tm. The interface is
+ * the same, except that most functions will just return -EWOULDBLOCK.
+ * Methods that return void yet may block should not be called on a clone
+ * viz. dm_tm_inc, dm_tm_dec. Call dm_tm_destroy() as you would with a normal
+ * tm when you've finished with it. You may not destroy the original prior
+ * to clones.
+ */
+struct dm_transaction_manager *dm_tm_create_non_blocking_clone(struct dm_transaction_manager *real);
+
+/*
+ * We use a 2-phase commit here.
+ *
+ * i) In the first phase the block manager is told to start flushing, and
+ * the changes to the space map are written to disk. You should interrogate
+ * your particular space map to get detail of its root node etc. to be
+ * included in your superblock.
+ *
+ * ii) @root will be committed last. You shouldn't use more than the
+ * first 512 bytes of @root if you wish the transaction to survive a power
+ * failure. You *must* have a write lock held on @root for both stage (i)
+ * and (ii). The commit will drop the write lock.
+ */
+int dm_tm_pre_commit(struct dm_transaction_manager *tm);
+int dm_tm_commit(struct dm_transaction_manager *tm, struct dm_block *root);
+
+/*
+ * These methods are the only way to get hold of a writeable block.
+ */
+
+/*
+ * dm_tm_new_block() is pretty self-explanatory. Make sure you do actually
+ * write to the whole of @data before you unlock, otherwise you could get
+ * a data leak. (The other option is for tm_new_block() to zero new blocks
+ * before handing them out, which will be redundant in most, if not all,
+ * cases).
+ * Zeroes the new block and returns with write lock held.
+ */
+int dm_tm_new_block(struct dm_transaction_manager *tm,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+/*
+ * dm_tm_shadow_block() allocates a new block and copies the data from @orig
+ * to it. It then decrements the reference count on original block. Use
+ * this to update the contents of a block in a data structure, don't
+ * confuse this with a clone - you shouldn't access the orig block after
+ * this operation. Because the tm knows the scope of the transaction it
+ * can optimise requests for a shadow of a shadow to a no-op. Don't forget
+ * to unlock when you've finished with the shadow.
+ *
+ * The @inc_children flag is used to tell the caller whether it needs to
+ * adjust reference counts for children. (Data in the block may refer to
+ * other blocks.)
+ *
+ * Shadowing implicitly drops a reference on @orig so you must not have
+ * it locked when you call this.
+ */
+int dm_tm_shadow_block(struct dm_transaction_manager *tm, dm_block_t orig,
+ struct dm_block_validator *v,
+ struct dm_block **result, int *inc_children);
+
+/*
+ * Read access. You can lock any block you want. If there's a write lock
+ * on it outstanding then it'll block.
+ */
+int dm_tm_read_lock(struct dm_transaction_manager *tm, dm_block_t b,
+ struct dm_block_validator *v,
+ struct dm_block **result);
+
+int dm_tm_unlock(struct dm_transaction_manager *tm, struct dm_block *b);
+
+/*
+ * Functions for altering the reference count of a block directly.
+ */
+void dm_tm_inc(struct dm_transaction_manager *tm, dm_block_t b);
+
+void dm_tm_dec(struct dm_transaction_manager *tm, dm_block_t b);
+
+int dm_tm_ref(struct dm_transaction_manager *tm, dm_block_t b,
+ uint32_t *result);
+
+struct dm_block_manager *dm_tm_get_bm(struct dm_transaction_manager *tm);
+
+/*
+ * A little utility that ties the knot by producing a transaction manager
+ * that has a space map managed by the transaction manager...
+ *
+ * Returns a tm that has an open transaction to write the new disk sm.
+ * Caller should store the new sm root and commit.
+ */
+int dm_tm_create_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock);
+
+int dm_tm_open_with_sm(struct dm_block_manager *bm, dm_block_t sb_location,
+ struct dm_block_validator *sb_validator,
+ size_t root_offset, size_t root_max_len,
+ struct dm_transaction_manager **tm,
+ struct dm_space_map **sm, struct dm_block **sblock);
+
+#endif /* _LINUX_DM_TRANSACTION_MANAGER_H */
diff --git a/drivers/media/dvb/ddbridge/Makefile b/drivers/media/dvb/ddbridge/Makefile
index cf7214e..38019ba 100644
--- a/drivers/media/dvb/ddbridge/Makefile
+++ b/drivers/media/dvb/ddbridge/Makefile
@@ -11,4 +11,4 @@
ccflags-y += -Idrivers/media/common/tuners/
# For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/cxd2099/
+ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 7d0710b..26c8b9e 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -102,6 +102,7 @@
dvb-usb-mxl111sf-objs = mxl111sf.o mxl111sf-phy.o mxl111sf-i2c.o mxl111sf-gpio.o
obj-$(CONFIG_DVB_USB_MXL111SF) += dvb-usb-mxl111sf.o
+obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-demod.o
obj-$(CONFIG_DVB_USB_MXL111SF) += mxl111sf-tuner.o
ccflags-y += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 2ad33ba..2d08c9b 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -37,6 +37,7 @@
#define USB_VID_HAUPPAUGE 0x2040
#define USB_VID_HYPER_PALTEK 0x1025
#define USB_VID_INTEL 0x8086
+#define USB_VID_ITETECH 0x048d
#define USB_VID_KWORLD 0xeb2a
#define USB_VID_KWORLD_2 0x1b80
#define USB_VID_KYE 0x0458
@@ -126,6 +127,7 @@
#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1
#define USB_PID_INTEL_CE9500 0x9500
+#define USB_PID_ITETECH_IT9135 0x9135
#define USB_PID_KWORLD_399U 0xe399
#define USB_PID_KWORLD_399U_2 0xe400
#define USB_PID_KWORLD_395U 0xe396
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index f027a2c..c462261 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -60,6 +60,17 @@
u8 id;
};
+struct ite_config {
+ u8 chip_ver;
+ u16 chip_type;
+ u32 firmware;
+ u8 tuner_id_0;
+ u8 tuner_id_1;
+ u8 dual_mode;
+};
+
+struct ite_config it913x_config;
+
static int it913x_bulk_write(struct usb_device *dev,
u8 *snd, int len, u8 pipe)
{
@@ -191,18 +202,23 @@
static u32 it913x_query(struct usb_device *udev, u8 pro)
{
int ret;
- u32 res = 0;
u8 data[4];
ret = it913x_io(udev, READ_LONG, pro, CMD_DEMOD_READ,
- 0x1222, 0, &data[0], 1);
- if (data[0] == 0x1) {
- ret = it913x_io(udev, READ_SHORT, pro,
- CMD_QUERYINFO, 0, 0x1, &data[0], 4);
- res = (data[0] << 24) + (data[1] << 16) +
- (data[2] << 8) + data[3];
- }
+ 0x1222, 0, &data[0], 3);
- return (ret < 0) ? 0 : res;
+ it913x_config.chip_ver = data[0];
+ it913x_config.chip_type = (u16)(data[2] << 8) + data[1];
+
+ info("Chip Version=%02x Chip Type=%04x", it913x_config.chip_ver,
+ it913x_config.chip_type);
+
+ ret |= it913x_io(udev, READ_SHORT, pro,
+ CMD_QUERYINFO, 0, 0x1, &data[0], 4);
+
+ it913x_config.firmware = (data[0] << 24) + (data[1] << 16) +
+ (data[2] << 8) + data[3];
+
+ return (ret < 0) ? 0 : it913x_config.firmware;
}
static int it913x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
@@ -336,26 +352,35 @@
int *cold)
{
int ret = 0, firm_no;
- u8 reg, adap, ep, tun0, tun1;
+ u8 reg, remote;
firm_no = it913x_return_status(udev);
- ep = it913x_read_reg(udev, 0x49ac);
- adap = it913x_read_reg(udev, 0x49c5);
- tun0 = it913x_read_reg(udev, 0x49d0);
- info("No. Adapters=%x Endpoints=%x Tuner Type=%x", adap, ep, tun0);
+ /* checnk for dual mode */
+ it913x_config.dual_mode = it913x_read_reg(udev, 0x49c5);
+
+ /* TODO different remotes */
+ remote = it913x_read_reg(udev, 0x49ac); /* Remote */
+ if (remote == 0)
+ props->rc.core.rc_codes = NULL;
+
+ /* TODO at the moment tuner_id is always assigned to 0x38 */
+ it913x_config.tuner_id_0 = it913x_read_reg(udev, 0x49d0);
+
+ info("Dual mode=%x Remote=%x Tuner Type=%x", it913x_config.dual_mode
+ , remote, it913x_config.tuner_id_0);
if (firm_no > 0) {
*cold = 0;
return 0;
}
- if (adap > 2) {
- tun1 = it913x_read_reg(udev, 0x49e0);
+ if (it913x_config.dual_mode) {
+ it913x_config.tuner_id_1 = it913x_read_reg(udev, 0x49e0);
ret = it913x_wr_reg(udev, DEV_0, GPIOH1_EN, 0x1);
ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_ON, 0x1);
ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x1);
- msleep(50); /* Delay noticed reset cycle ? */
+ msleep(50);
ret |= it913x_wr_reg(udev, DEV_0, GPIOH1_O, 0x0);
msleep(50);
reg = it913x_read_reg(udev, GPIOH1_O);
@@ -366,14 +391,19 @@
ret = it913x_wr_reg(udev, DEV_0,
GPIOH1_O, 0x0);
}
+ props->num_adapters = 2;
} else
props->num_adapters = 1;
reg = it913x_read_reg(udev, IO_MUX_POWER_CLK);
- ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
-
- ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x1);
+ if (it913x_config.dual_mode) {
+ ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
+ ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x1);
+ } else {
+ ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, 0x0);
+ ret |= it913x_wr_reg(udev, DEV_0, CLK_O_EN, 0x0);
+ }
*cold = 1;
@@ -403,13 +433,11 @@
const struct firmware *fw)
{
int ret = 0, i;
- u8 packet_size, dlen, tun1;
+ u8 packet_size, dlen;
u8 *fw_data;
packet_size = 0x29;
- tun1 = it913x_read_reg(udev, 0x49e0);
-
ret = it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_100);
info("FRM Starting Firmware Download");
@@ -444,11 +472,12 @@
ret |= it913x_wr_reg(udev, DEV_0, I2C_CLK, I2C_CLK_400);
/* Tuner function */
- ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
+ if (it913x_config.dual_mode)
+ ret |= it913x_wr_reg(udev, DEV_0_DMOD , 0xec4c, 0xa0);
ret |= it913x_wr_reg(udev, DEV_0, PADODPU, 0x0);
ret |= it913x_wr_reg(udev, DEV_0, AGC_O_D, 0x0);
- if (tun1 > 0) {
+ if (it913x_config.dual_mode) {
ret |= it913x_wr_reg(udev, DEV_1, PADODPU, 0x0);
ret |= it913x_wr_reg(udev, DEV_1, AGC_O_D, 0x0);
}
@@ -475,9 +504,28 @@
u8 adf = it913x_read_reg(udev, IO_MUX_POWER_CLK);
u8 adap_addr = I2C_BASE_ADDR + (adap->id << 5);
u16 ep_size = adap->props.fe[0].stream.u.bulk.buffersize;
+ u8 tuner_id, tuner_type;
+
+ if (adap->id == 0)
+ tuner_id = it913x_config.tuner_id_0;
+ else
+ tuner_id = it913x_config.tuner_id_1;
+
+ /* TODO we always use IT9137 possible references here*/
+ /* Documentation suggests don't care */
+ switch (tuner_id) {
+ case 0x51:
+ case 0x52:
+ case 0x60:
+ case 0x61:
+ case 0x62:
+ default:
+ case 0x38:
+ tuner_type = IT9137;
+ }
adap->fe_adap[0].fe = dvb_attach(it913x_fe_attach,
- &adap->dev->i2c_adap, adap_addr, adf, IT9137);
+ &adap->dev->i2c_adap, adap_addr, adf, tuner_type);
if (adap->id == 0 && adap->fe_adap[0].fe) {
ret = it913x_wr_reg(udev, DEV_0_DMOD, MP2_SW_RST, 0x1);
@@ -533,6 +581,7 @@
static struct usb_device_id it913x_table[] = {
{ USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09) },
+ { USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135) },
{} /* Terminating entry */
};
@@ -608,12 +657,14 @@
.rc_codes = RC_MAP_KWORLD_315U,
},
.i2c_algo = &it913x_i2c_algo,
- .num_device_descs = 1,
+ .num_device_descs = 2,
.devices = {
{ "Kworld UB499-2T T09(IT9137)",
{ &it913x_table[0], NULL },
},
-
+ { "ITE 9135 Generic",
+ { &it913x_table[1], NULL },
+ },
}
};
@@ -647,5 +698,5 @@
MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.06");
+MODULE_VERSION("1.07");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.c b/drivers/media/dvb/dvb-usb/mxl111sf-demod.c
new file mode 100644
index 0000000..d1f5837
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-demod.c
@@ -0,0 +1,614 @@
+/*
+ * mxl111sf-demod.c - driver for the MaxLinear MXL111SF DVB-T demodulator
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-demod.h"
+#include "mxl111sf-reg.h"
+
+/* debug */
+static int mxl111sf_demod_debug;
+module_param_named(debug, mxl111sf_demod_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+#define mxl_dbg(fmt, arg...) \
+ if (mxl111sf_demod_debug) \
+ mxl_printk(KERN_DEBUG, fmt, ##arg)
+
+/* ------------------------------------------------------------------------ */
+
+struct mxl111sf_demod_state {
+ struct mxl111sf_state *mxl_state;
+
+ struct mxl111sf_demod_config *cfg;
+
+ struct dvb_frontend fe;
+};
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_demod_read_reg(struct mxl111sf_demod_state *state,
+ u8 addr, u8 *data)
+{
+ return (state->cfg->read_reg) ?
+ state->cfg->read_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static int mxl111sf_demod_write_reg(struct mxl111sf_demod_state *state,
+ u8 addr, u8 data)
+{
+ return (state->cfg->write_reg) ?
+ state->cfg->write_reg(state->mxl_state, addr, data) :
+ -EINVAL;
+}
+
+static
+int mxl111sf_demod_program_regs(struct mxl111sf_demod_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info)
+{
+ return (state->cfg->program_regs) ?
+ state->cfg->program_regs(state->mxl_state, ctrl_reg_info) :
+ -EINVAL;
+}
+
+/* ------------------------------------------------------------------------ */
+/* TPS */
+
+static
+int mxl1x1sf_demod_get_tps_code_rate(struct mxl111sf_demod_state *state,
+ fe_code_rate_t *code_rate)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_CODE_RATE_TPS_REG, &val);
+ /* bit<2:0> - 000:1/2, 001:2/3, 010:3/4, 011:5/6, 100:7/8 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch (val & V6_CODE_RATE_TPS_MASK) {
+ case 0:
+ *code_rate = FEC_1_2;
+ break;
+ case 1:
+ *code_rate = FEC_2_3;
+ break;
+ case 2:
+ *code_rate = FEC_3_4;
+ break;
+ case 3:
+ *code_rate = FEC_5_6;
+ break;
+ case 4:
+ *code_rate = FEC_7_8;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_constellation(struct mxl111sf_demod_state *state,
+ fe_modulation_t *constellation)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_MODORDER_TPS_REG, &val);
+ /* Constellation, 00 : QPSK, 01 : 16QAM, 10:64QAM */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_PARAM_CONSTELLATION_MASK) >> 4) {
+ case 0:
+ *constellation = QPSK;
+ break;
+ case 1:
+ *constellation = QAM_16;
+ break;
+ case 2:
+ *constellation = QAM_64;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_guard_fft_mode(struct mxl111sf_demod_state *state,
+ fe_transmit_mode_t *fft_mode)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_MODE_TPS_REG, &val);
+ /* FFT Mode, 00:2K, 01:8K, 10:4K */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_PARAM_FFT_MODE_MASK) >> 2) {
+ case 0:
+ *fft_mode = TRANSMISSION_MODE_2K;
+ break;
+ case 1:
+ *fft_mode = TRANSMISSION_MODE_8K;
+ break;
+ case 2:
+ *fft_mode = TRANSMISSION_MODE_4K;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_guard_interval(struct mxl111sf_demod_state *state,
+ fe_guard_interval_t *guard)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_CP_TPS_REG, &val);
+ /* 00:1/32, 01:1/16, 10:1/8, 11:1/4 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_PARAM_GI_MASK) >> 4) {
+ case 0:
+ *guard = GUARD_INTERVAL_1_32;
+ break;
+ case 1:
+ *guard = GUARD_INTERVAL_1_16;
+ break;
+ case 2:
+ *guard = GUARD_INTERVAL_1_8;
+ break;
+ case 3:
+ *guard = GUARD_INTERVAL_1_4;
+ break;
+ }
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_hierarchy(struct mxl111sf_demod_state *state,
+ fe_hierarchy_t *hierarchy)
+{
+ u8 val;
+ int ret = mxl111sf_demod_read_reg(state, V6_TPS_HIERACHY_REG, &val);
+ /* bit<6:4> - 000:Non hierarchy, 001:1, 010:2, 011:4 */
+ if (mxl_fail(ret))
+ goto fail;
+
+ switch ((val & V6_TPS_HIERARCHY_INFO_MASK) >> 6) {
+ case 0:
+ *hierarchy = HIERARCHY_NONE;
+ break;
+ case 1:
+ *hierarchy = HIERARCHY_1;
+ break;
+ case 2:
+ *hierarchy = HIERARCHY_2;
+ break;
+ case 3:
+ *hierarchy = HIERARCHY_4;
+ break;
+ }
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+/* LOCKS */
+
+static
+int mxl1x1sf_demod_get_sync_lock_status(struct mxl111sf_demod_state *state,
+ int *sync_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_SYNC_LOCK_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *sync_lock = (val & SYNC_LOCK_MASK) >> 4;
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_rs_lock_status(struct mxl111sf_demod_state *state,
+ int *rs_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_RS_LOCK_DET_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *rs_lock = (val & RS_LOCK_DET_MASK) >> 3;
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_tps_lock_status(struct mxl111sf_demod_state *state,
+ int *tps_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_TPS_LOCK_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *tps_lock = (val & V6_PARAM_TPS_LOCK_MASK) >> 6;
+fail:
+ return ret;
+}
+
+static
+int mxl1x1sf_demod_get_fec_lock_status(struct mxl111sf_demod_state *state,
+ int *fec_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_IRQ_STATUS_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *fec_lock = (val & IRQ_MASK_FEC_LOCK) >> 4;
+fail:
+ return ret;
+}
+
+#if 0
+static
+int mxl1x1sf_demod_get_cp_lock_status(struct mxl111sf_demod_state *state,
+ int *cp_lock)
+{
+ u8 val = 0;
+ int ret = mxl111sf_demod_read_reg(state, V6_CP_LOCK_DET_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+ *cp_lock = (val & V6_CP_LOCK_DET_MASK) >> 2;
+fail:
+ return ret;
+}
+#endif
+
+static int mxl1x1sf_demod_reset_irq_status(struct mxl111sf_demod_state *state)
+{
+ return mxl111sf_demod_write_reg(state, 0x0e, 0xff);
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_demod_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *param)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ int ret = 0;
+
+ struct mxl111sf_reg_ctrl_info phy_pll_patch[] = {
+ {0x00, 0xff, 0x01}, /* change page to 1 */
+ {0x40, 0xff, 0x05},
+ {0x40, 0xff, 0x01},
+ {0x41, 0xff, 0xca},
+ {0x41, 0xff, 0xc0},
+ {0x00, 0xff, 0x00}, /* change page to 0 */
+ {0, 0, 0}
+ };
+
+ mxl_dbg("()");
+
+ if (fe->ops.tuner_ops.set_params) {
+ ret = fe->ops.tuner_ops.set_params(fe, param);
+ if (mxl_fail(ret))
+ goto fail;
+ msleep(50);
+ }
+ ret = mxl111sf_demod_program_regs(state, phy_pll_patch);
+ mxl_fail(ret);
+ msleep(50);
+ ret = mxl1x1sf_demod_reset_irq_status(state);
+ mxl_fail(ret);
+ msleep(100);
+fail:
+ return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+#if 0
+/* resets TS Packet error count */
+/* After setting 7th bit of V5_PER_COUNT_RESET_REG, it should be reset to 0. */
+static
+int mxl1x1sf_demod_reset_packet_error_count(struct mxl111sf_demod_state *state)
+{
+ struct mxl111sf_reg_ctrl_info reset_per_count[] = {
+ {0x20, 0x01, 0x01},
+ {0x20, 0x01, 0x00},
+ {0, 0, 0}
+ };
+ return mxl111sf_demod_program_regs(state, reset_per_count);
+}
+#endif
+
+/* returns TS Packet error count */
+/* PER Count = FEC_PER_COUNT * (2 ** (FEC_PER_SCALE * 4)) */
+static int mxl111sf_demod_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ u32 fec_per_count, fec_per_scale;
+ u8 val;
+ int ret;
+
+ *ucblocks = 0;
+
+ /* FEC_PER_COUNT Register */
+ ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_COUNT_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ fec_per_count = val;
+
+ /* FEC_PER_SCALE Register */
+ ret = mxl111sf_demod_read_reg(state, V6_FEC_PER_SCALE_REG, &val);
+ if (mxl_fail(ret))
+ goto fail;
+
+ val &= V6_FEC_PER_SCALE_MASK;
+ val *= 4;
+
+ fec_per_scale = 1 << val;
+
+ fec_per_count *= fec_per_scale;
+
+ *ucblocks = fec_per_count;
+fail:
+ return ret;
+}
+
+#ifdef MXL111SF_DEMOD_ENABLE_CALCULATIONS
+/* FIXME: leaving this enabled breaks the build on some architectures,
+ * and we shouldn't have any floating point math in the kernel, anyway.
+ *
+ * These macros need to be re-written, but it's harmless to simply
+ * return zero for now. */
+#define CALCULATE_BER(avg_errors, count) \
+ ((u32)(avg_errors * 4)/(count*64*188*8))
+#define CALCULATE_SNR(data) \
+ ((u32)((10 * (u32)data / 64) - 2.5))
+#else
+#define CALCULATE_BER(avg_errors, count) 0
+#define CALCULATE_SNR(data) 0
+#endif
+
+static int mxl111sf_demod_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ u8 val1, val2, val3;
+ int ret;
+
+ *ber = 0;
+
+ ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_LSB_REG, &val1);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_demod_read_reg(state, V6_RS_AVG_ERRORS_MSB_REG, &val2);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_demod_read_reg(state, V6_N_ACCUMULATE_REG, &val3);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *ber = CALCULATE_BER((val1 | (val2 << 8)), val3);
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_calc_snr(struct mxl111sf_demod_state *state,
+ u16 *snr)
+{
+ u8 val1, val2;
+ int ret;
+
+ *snr = 0;
+
+ ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_LSB_REG, &val1);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_demod_read_reg(state, V6_SNR_RB_MSB_REG, &val2);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *snr = CALCULATE_SNR(val1 | ((val2 & 0x03) << 8));
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+
+ int ret = mxl111sf_demod_calc_snr(state, snr);
+ if (mxl_fail(ret))
+ goto fail;
+
+ *snr /= 10; /* 0.1 dB */
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_read_status(struct dvb_frontend *fe,
+ fe_status_t *status)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ int ret, locked, cr_lock, sync_lock, fec_lock;
+
+ *status = 0;
+
+ ret = mxl1x1sf_demod_get_rs_lock_status(state, &locked);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_demod_get_tps_lock_status(state, &cr_lock);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_demod_get_sync_lock_status(state, &sync_lock);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_demod_get_fec_lock_status(state, &fec_lock);
+ if (mxl_fail(ret))
+ goto fail;
+
+ if (locked)
+ *status |= FE_HAS_SIGNAL;
+ if (cr_lock)
+ *status |= FE_HAS_CARRIER;
+ if (sync_lock)
+ *status |= FE_HAS_SYNC;
+ if (fec_lock) /* false positives? */
+ *status |= FE_HAS_VITERBI;
+
+ if ((locked) && (cr_lock) && (sync_lock))
+ *status |= FE_HAS_LOCK;
+fail:
+ return ret;
+}
+
+static int mxl111sf_demod_read_signal_strength(struct dvb_frontend *fe,
+ u16 *signal_strength)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ fe_modulation_t constellation;
+ u16 snr;
+
+ mxl111sf_demod_calc_snr(state, &snr);
+ mxl1x1sf_demod_get_tps_constellation(state, &constellation);
+
+ switch (constellation) {
+ case QPSK:
+ *signal_strength = (snr >= 1300) ?
+ min(65535, snr * 44) : snr * 38;
+ break;
+ case QAM_16:
+ *signal_strength = (snr >= 1500) ?
+ min(65535, snr * 38) : snr * 33;
+ break;
+ case QAM_64:
+ *signal_strength = (snr >= 2000) ?
+ min(65535, snr * 29) : snr * 25;
+ break;
+ default:
+ *signal_strength = 0;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mxl111sf_demod_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+
+ mxl_dbg("()");
+#if 0
+ p->inversion = /* FIXME */ ? INVERSION_ON : INVERSION_OFF;
+#endif
+ if (fe->ops.tuner_ops.get_bandwidth)
+ fe->ops.tuner_ops.get_bandwidth(fe, &p->u.ofdm.bandwidth);
+ if (fe->ops.tuner_ops.get_frequency)
+ fe->ops.tuner_ops.get_frequency(fe, &p->frequency);
+ mxl1x1sf_demod_get_tps_code_rate(state, &p->u.ofdm.code_rate_HP);
+ mxl1x1sf_demod_get_tps_code_rate(state, &p->u.ofdm.code_rate_LP);
+ mxl1x1sf_demod_get_tps_constellation(state, &p->u.ofdm.constellation);
+ mxl1x1sf_demod_get_tps_guard_fft_mode(state,
+ &p->u.ofdm.transmission_mode);
+ mxl1x1sf_demod_get_tps_guard_interval(state,
+ &p->u.ofdm.guard_interval);
+ mxl1x1sf_demod_get_tps_hierarchy(state,
+ &p->u.ofdm.hierarchy_information);
+
+ return 0;
+}
+
+static
+int mxl111sf_demod_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *tune)
+{
+ tune->min_delay_ms = 1000;
+ return 0;
+}
+
+static void mxl111sf_demod_release(struct dvb_frontend *fe)
+{
+ struct mxl111sf_demod_state *state = fe->demodulator_priv;
+ mxl_dbg("()");
+ kfree(state);
+ fe->demodulator_priv = NULL;
+}
+
+static struct dvb_frontend_ops mxl111sf_demod_ops = {
+
+ .info = {
+ .name = "MaxLinear MxL111SF DVB-T demodulator",
+ .type = FE_OFDM,
+ .frequency_min = 177000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 166666,
+ .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER
+ },
+ .release = mxl111sf_demod_release,
+#if 0
+ .init = mxl111sf_init,
+ .i2c_gate_ctrl = mxl111sf_i2c_gate_ctrl,
+#endif
+ .set_frontend = mxl111sf_demod_set_frontend,
+ .get_frontend = mxl111sf_demod_get_frontend,
+ .get_tune_settings = mxl111sf_demod_get_tune_settings,
+ .read_status = mxl111sf_demod_read_status,
+ .read_signal_strength = mxl111sf_demod_read_signal_strength,
+ .read_ber = mxl111sf_demod_read_ber,
+ .read_snr = mxl111sf_demod_read_snr,
+ .read_ucblocks = mxl111sf_demod_read_ucblocks,
+};
+
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+ struct mxl111sf_demod_config *cfg)
+{
+ struct mxl111sf_demod_state *state = NULL;
+
+ mxl_dbg("()");
+
+ state = kzalloc(sizeof(struct mxl111sf_demod_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->mxl_state = mxl_state;
+ state->cfg = cfg;
+
+ memcpy(&state->fe.ops, &mxl111sf_demod_ops,
+ sizeof(struct dvb_frontend_ops));
+
+ state->fe.demodulator_priv = state;
+ return &state->fe;
+}
+EXPORT_SYMBOL_GPL(mxl111sf_demod_attach);
+
+MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver");
+MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.1");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf-demod.h b/drivers/media/dvb/dvb-usb/mxl111sf-demod.h
new file mode 100644
index 0000000..432706a
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/mxl111sf-demod.h
@@ -0,0 +1,55 @@
+/*
+ * mxl111sf-demod.h - driver for the MaxLinear MXL111SF DVB-T demodulator
+ *
+ * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MXL111SF_DEMOD_H__
+#define __MXL111SF_DEMOD_H__
+
+#include "dvb_frontend.h"
+#include "mxl111sf.h"
+
+struct mxl111sf_demod_config {
+ int (*read_reg)(struct mxl111sf_state *state, u8 addr, u8 *data);
+ int (*write_reg)(struct mxl111sf_state *state, u8 addr, u8 data);
+ int (*program_regs)(struct mxl111sf_state *state,
+ struct mxl111sf_reg_ctrl_info *ctrl_reg_info);
+};
+
+#if defined(CONFIG_DVB_USB_MXL111SF) || \
+ (defined(CONFIG_DVB_USB_MXL111SF_MODULE) && defined(MODULE))
+extern
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+ struct mxl111sf_demod_config *cfg);
+#else
+static inline
+struct dvb_frontend *mxl111sf_demod_attach(struct mxl111sf_state *mxl_state,
+ struct mxl111sf_demod_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_USB_MXL111SF */
+
+#endif /* __MXL111SF_DEMOD_H__ */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.c b/drivers/media/dvb/dvb-usb/mxl111sf.c
index 546ba59..b5c98da 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf.c
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.c
@@ -17,6 +17,7 @@
#include "mxl111sf-i2c.h"
#include "mxl111sf-gpio.h"
+#include "mxl111sf-demod.h"
#include "mxl111sf-tuner.h"
#include "lgdt3305.h"
@@ -362,6 +363,22 @@
return ret;
}
+static int mxl111sf_ep4_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ int ret = 0;
+
+ deb_info("%s(%d)\n", __func__, onoff);
+
+ if (onoff) {
+ ret = mxl111sf_enable_usb_output(state);
+ mxl_fail(ret);
+ }
+
+ return ret;
+}
+
/* ------------------------------------------------------------------------ */
static struct lgdt3305_config hauppauge_lgdt3305_config = {
@@ -438,6 +455,70 @@
return ret;
}
+static struct mxl111sf_demod_config mxl_demod_config = {
+ .read_reg = mxl111sf_read_reg,
+ .write_reg = mxl111sf_write_reg,
+ .program_regs = mxl111sf_ctrl_program_regs,
+};
+
+static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap->dev;
+ struct mxl111sf_state *state = d->priv;
+ int fe_id = adap->num_frontends_initialized;
+ struct mxl111sf_adap_state *adap_state = adap->fe_adap[fe_id].priv;
+ int ret;
+
+ deb_adv("%s()\n", __func__);
+
+ /* save a pointer to the dvb_usb_device in device state */
+ state->d = d;
+ adap_state->alt_mode = (dvb_usb_mxl111sf_isoc) ? 1 : 2;
+ state->alt_mode = adap_state->alt_mode;
+
+ if (usb_set_interface(adap->dev->udev, 0, state->alt_mode) < 0)
+ err("set interface failed");
+
+ state->gpio_mode = MXL111SF_GPIO_MOD_DVBT;
+ adap_state->gpio_mode = state->gpio_mode;
+ adap_state->device_mode = MXL_SOC_MODE;
+ adap_state->ep6_clockphase = 1;
+
+ ret = mxl1x1sf_soft_reset(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl111sf_init_tuner_demod(state);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl1x1sf_set_device_mode(state, adap_state->device_mode);
+ if (mxl_fail(ret))
+ goto fail;
+
+ ret = mxl111sf_enable_usb_output(state);
+ if (mxl_fail(ret))
+ goto fail;
+ ret = mxl1x1sf_top_master_ctrl(state, 1);
+ if (mxl_fail(ret))
+ goto fail;
+
+ /* dont care if this fails */
+ mxl111sf_init_port_expander(state);
+
+ adap->fe_adap[fe_id].fe = dvb_attach(mxl111sf_demod_attach, state,
+ &mxl_demod_config);
+ if (adap->fe_adap[fe_id].fe) {
+ adap_state->fe_init = adap->fe_adap[fe_id].fe->ops.init;
+ adap->fe_adap[fe_id].fe->ops.init = mxl111sf_adap_fe_init;
+ adap_state->fe_sleep = adap->fe_adap[fe_id].fe->ops.sleep;
+ adap->fe_adap[fe_id].fe->ops.sleep = mxl111sf_adap_fe_sleep;
+ return 0;
+ }
+ ret = -EIO;
+fail:
+ return ret;
+}
+
static inline int mxl111sf_set_ant_path(struct mxl111sf_state *state,
int antpath)
{
@@ -567,7 +648,8 @@
#endif
};
-/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties;
+static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties;
static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties;
static struct dvb_usb_device_properties mxl111sf_atsc_isoc_properties;
@@ -580,9 +662,15 @@
if (((dvb_usb_mxl111sf_isoc) &&
(0 == dvb_usb_device_init(intf,
+ &mxl111sf_dvbt_isoc_properties,
+ THIS_MODULE, &d, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf,
&mxl111sf_atsc_isoc_properties,
THIS_MODULE, &d, adapter_nr))) ||
0 == dvb_usb_device_init(intf,
+ &mxl111sf_dvbt_bulk_properties,
+ THIS_MODULE, &d, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf,
&mxl111sf_atsc_bulk_properties,
THIS_MODULE, &d, adapter_nr) || 0) {
@@ -669,6 +757,36 @@
MODULE_DEVICE_TABLE(usb, mxl111sf_table);
+#define MXL111SF_EP4_BULK_STREAMING_CONFIG \
+ .streaming_ctrl = mxl111sf_ep4_streaming_ctrl, \
+ .stream = { \
+ .type = USB_BULK, \
+ .count = 5, \
+ .endpoint = 0x04, \
+ .u = { \
+ .bulk = { \
+ .buffersize = 8192, \
+ } \
+ } \
+ }
+
+/* FIXME: works for v6 but not v8 silicon */
+#define MXL111SF_EP4_ISOC_STREAMING_CONFIG \
+ .streaming_ctrl = mxl111sf_ep4_streaming_ctrl, \
+ .stream = { \
+ .type = USB_ISOC, \
+ .count = 5, \
+ .endpoint = 0x04, \
+ .u = { \
+ .isoc = { \
+ .framesperurb = 96, \
+ /* FIXME: v6 SILICON: */ \
+ .framesize = 564, \
+ .interval = 1, \
+ } \
+ } \
+ }
+
#define MXL111SF_EP6_BULK_STREAMING_CONFIG \
.streaming_ctrl = mxl111sf_ep6_streaming_ctrl, \
.stream = { \
@@ -712,7 +830,7 @@
.generic_bulk_ctrl_endpoint_response = MXL_EP1_REG_READ, \
.size_of_priv = sizeof(struct mxl111sf_state)
-static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = {
+static struct dvb_usb_device_properties mxl111sf_dvbt_bulk_properties = {
MXL111SF_DEFAULT_DEVICE_PROPERTIES,
.num_adapters = 1,
@@ -723,10 +841,106 @@
.fe = {{
.size_of_priv = sizeof(struct mxl111sf_adap_state),
+ .frontend_attach = mxl111sf_attach_demod,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP4_BULK_STREAMING_CONFIG,
+ } },
+ },
+ },
+ .num_device_descs = 4,
+ .devices = {
+ { "Hauppauge 126xxx DVBT (bulk)",
+ { NULL },
+ { &mxl111sf_table[4], &mxl111sf_table[8],
+ NULL },
+ },
+ { "Hauppauge 117xxx DVBT (bulk)",
+ { NULL },
+ { &mxl111sf_table[15], &mxl111sf_table[18],
+ NULL },
+ },
+ { "Hauppauge 138xxx DVBT (bulk)",
+ { NULL },
+ { &mxl111sf_table[20], &mxl111sf_table[22],
+ &mxl111sf_table[24], &mxl111sf_table[26],
+ NULL },
+ },
+ { "Hauppauge 126xxx (tp-bulk)",
+ { NULL },
+ { &mxl111sf_table[28], &mxl111sf_table[30],
+ NULL },
+ },
+ }
+};
+
+static struct dvb_usb_device_properties mxl111sf_dvbt_isoc_properties = {
+ MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .fe_ioctl_override = mxl111sf_fe_ioctl_override,
+ .num_frontends = 1,
+ .fe = {{
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+
+ .frontend_attach = mxl111sf_attach_demod,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP4_ISOC_STREAMING_CONFIG,
+ } },
+ },
+ },
+ .num_device_descs = 4,
+ .devices = {
+ { "Hauppauge 126xxx DVBT (isoc)",
+ { NULL },
+ { &mxl111sf_table[4], &mxl111sf_table[8],
+ NULL },
+ },
+ { "Hauppauge 117xxx DVBT (isoc)",
+ { NULL },
+ { &mxl111sf_table[15], &mxl111sf_table[18],
+ NULL },
+ },
+ { "Hauppauge 138xxx DVBT (isoc)",
+ { NULL },
+ { &mxl111sf_table[20], &mxl111sf_table[22],
+ &mxl111sf_table[24], &mxl111sf_table[26],
+ NULL },
+ },
+ { "Hauppauge 126xxx (tp-isoc)",
+ { NULL },
+ { &mxl111sf_table[28], &mxl111sf_table[30],
+ NULL },
+ },
+ }
+};
+
+static struct dvb_usb_device_properties mxl111sf_atsc_bulk_properties = {
+ MXL111SF_DEFAULT_DEVICE_PROPERTIES,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .fe_ioctl_override = mxl111sf_fe_ioctl_override,
+ .num_frontends = 2,
+ .fe = {{
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+
.frontend_attach = mxl111sf_lgdt3305_frontend_attach,
.tuner_attach = mxl111sf_attach_tuner,
MXL111SF_EP6_BULK_STREAMING_CONFIG,
+ },
+ {
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+
+ .frontend_attach = mxl111sf_attach_demod,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP4_BULK_STREAMING_CONFIG,
}},
},
},
@@ -776,7 +990,7 @@
.adapter = {
{
.fe_ioctl_override = mxl111sf_fe_ioctl_override,
- .num_frontends = 1,
+ .num_frontends = 2,
.fe = {{
.size_of_priv = sizeof(struct mxl111sf_adap_state),
@@ -784,6 +998,14 @@
.tuner_attach = mxl111sf_attach_tuner,
MXL111SF_EP6_ISOC_STREAMING_CONFIG,
+ },
+ {
+ .size_of_priv = sizeof(struct mxl111sf_adap_state),
+
+ .frontend_attach = mxl111sf_attach_demod,
+ .tuner_attach = mxl111sf_attach_tuner,
+
+ MXL111SF_EP4_ISOC_STREAMING_CONFIG,
}},
},
},
diff --git a/drivers/media/dvb/dvb-usb/mxl111sf.h b/drivers/media/dvb/dvb-usb/mxl111sf.h
index 5a2c7bb..364d89f 100644
--- a/drivers/media/dvb/dvb-usb/mxl111sf.h
+++ b/drivers/media/dvb/dvb-usb/mxl111sf.h
@@ -133,7 +133,7 @@
/* The following allows the mxl_fail() macro defined below to work
* in externel modules, such as mxl111sf-tuner.ko, even though
* dvb_usb_mxl111sf_debug is not defined within those modules */
-#ifdef __MXL111SF_TUNER_H__
+#if (defined(__MXL111SF_TUNER_H__)) || (defined(__MXL111SF_DEMOD_H__))
#define MXL_ADV_DEBUG_ENABLED MXL_ADV_DBG
#else
#define MXL_ADV_DEBUG_ENABLED dvb_usb_mxl111sf_debug
diff --git a/drivers/media/dvb/ngene/Makefile b/drivers/media/dvb/ngene/Makefile
index 8987361..13ebeff 100644
--- a/drivers/media/dvb/ngene/Makefile
+++ b/drivers/media/dvb/ngene/Makefile
@@ -11,4 +11,4 @@
ccflags-y += -Idrivers/media/common/tuners/
# For the staging CI driver cxd2099
-ccflags-y += -Idrivers/staging/cxd2099/
+ccflags-y += -Idrivers/staging/media/cxd2099/
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 52798a1..ccd5f0d 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -426,7 +426,6 @@
config RADIO_WL1273
tristate "Texas Instruments WL1273 I2C FM Radio"
depends on I2C && VIDEO_V4L2
- select MFD_CORE
select MFD_WL1273_CORE
select FW_LOADER
---help---
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 95ddcc4..db20904 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -128,8 +128,10 @@
u16 rdsbbl; /* PAUSEDET & RDSBBL */
} __attribute__ ((packed));
-#ifndef RADIO_TEA5764_XTAL
+#ifdef CONFIG_RADIO_TEA5764_XTAL
#define RADIO_TEA5764_XTAL 1
+#else
+#define RADIO_TEA5764_XTAL 0
#endif
static int radio_nr = -1;
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index d285c8c..b303a3f 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -517,6 +517,13 @@
source "drivers/media/video/m5mols/Kconfig"
+config VIDEO_S5K6AA
+ tristate "Samsung S5K6AAFX sensor support"
+ depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ ---help---
+ This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
+ camera sensor with an embedded SoC image signal processor.
+
comment "Flash devices"
config VIDEO_ADP1653
@@ -736,6 +743,8 @@
source "drivers/media/video/cx23885/Kconfig"
+source "drivers/media/video/cx25821/Kconfig"
+
source "drivers/media/video/au0828/Kconfig"
source "drivers/media/video/ivtv/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 11fff97..117f9c4 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -72,6 +72,7 @@
obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o
obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o
obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/
+obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
obj-$(CONFIG_VIDEO_ADP1653) += adp1653.o
obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o
@@ -104,6 +105,7 @@
obj-$(CONFIG_VIDEO_EM28XX) += em28xx/
obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/
+obj-$(CONFIG_VIDEO_CX25821) += cx25821/
obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c
index 774715d..8c775c5 100644
--- a/drivers/media/video/atmel-isi.c
+++ b/drivers/media/video/atmel-isi.c
@@ -94,6 +94,7 @@
unsigned int irq;
struct isi_platform_data *pdata;
+ u16 width_flags; /* max 12 bits */
struct list_head video_buffer_list;
struct frame_buffer *active;
@@ -248,9 +249,9 @@
/* ------------------------------------------------------------------
Videobuf operations
------------------------------------------------------------------*/
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned int sizes[],
- void *alloc_ctxs[])
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
@@ -647,50 +648,42 @@
fmt->packing == SOC_MBUS_PACKING_EXTEND16);
}
-static unsigned long make_bus_param(struct atmel_isi *isi)
-{
- unsigned long flags;
- /*
- * Platform specified synchronization and pixel clock polarities are
- * only a recommendation and are only used during probing. Atmel ISI
- * camera interface only works in master mode, i.e., uses HSYNC and
- * VSYNC signals from the sensor
- */
- flags = SOCAM_MASTER |
- SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_PCLK_SAMPLE_RISING |
- SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_DATA_ACTIVE_HIGH;
-
- if (isi->pdata->data_width_flags & ISI_DATAWIDTH_10)
- flags |= SOCAM_DATAWIDTH_10;
-
- if (isi->pdata->data_width_flags & ISI_DATAWIDTH_8)
- flags |= SOCAM_DATAWIDTH_8;
-
- if (flags & SOCAM_DATAWIDTH_MASK)
- return flags;
-
- return 0;
-}
+#define ISI_BUS_PARAM (V4L2_MBUS_MASTER | \
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_HSYNC_ACTIVE_LOW | \
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_VSYNC_ACTIVE_LOW | \
+ V4L2_MBUS_PCLK_SAMPLE_RISING | \
+ V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+ V4L2_MBUS_DATA_ACTIVE_HIGH)
static int isi_camera_try_bus_param(struct soc_camera_device *icd,
unsigned char buswidth)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct atmel_isi *isi = ici->priv;
- unsigned long camera_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long common_flags;
int ret;
- camera_flags = icd->ops->query_bus_param(icd);
- ret = soc_camera_bus_param_compatible(camera_flags,
- make_bus_param(isi));
- if (!ret)
- return -EINVAL;
- return 0;
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg,
+ ISI_BUS_PARAM);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%x\n",
+ cfg.flags, ISI_BUS_PARAM);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ }
+
+ if ((1 << (buswidth - 1)) & isi->width_flags)
+ return 0;
+ return -EINVAL;
}
@@ -812,59 +805,71 @@
static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct atmel_isi *isi = ici->priv;
- unsigned long bus_flags, camera_flags, common_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long common_flags;
int ret;
u32 cfg1 = 0;
- camera_flags = icd->ops->query_bus_param(icd);
-
- bus_flags = make_bus_param(isi);
- common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
- dev_dbg(icd->parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
- camera_flags, bus_flags, common_flags);
- if (!common_flags)
- return -EINVAL;
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg,
+ ISI_BUS_PARAM);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%x\n",
+ cfg.flags, ISI_BUS_PARAM);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ } else {
+ common_flags = ISI_BUS_PARAM;
+ }
+ dev_dbg(icd->parent, "Flags cam: 0x%x host: 0x%x common: 0x%lx\n",
+ cfg.flags, ISI_BUS_PARAM, common_flags);
/* Make choises, based on platform preferences */
- if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
if (isi->pdata->hsync_act_low)
- common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
if (isi->pdata->vsync_act_low)
- common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
- (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+ if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+ (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
if (isi->pdata->pclk_act_falling)
- common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
else
- common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
}
- ret = icd->ops->set_bus_param(icd, common_flags);
- if (ret < 0) {
- dev_dbg(icd->parent, "Camera set_bus_param(%lx) returned %d\n",
+ cfg.flags = common_flags;
+ ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
common_flags, ret);
return ret;
}
/* set bus param for ISI */
- if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+ if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW;
- if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+ if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW;
- if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+ if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
if (isi->pdata->has_emb_sync)
@@ -983,6 +988,11 @@
goto err_ioremap;
}
+ if (pdata->data_width_flags & ISI_DATAWIDTH_8)
+ isi->width_flags = 1 << 7;
+ if (pdata->data_width_flags & ISI_DATAWIDTH_10)
+ isi->width_flags |= 1 << 9;
+
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
irq = platform_get_irq(pdev, 0);
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 9e2f870..c6ff32a 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -1085,6 +1085,8 @@
setup.addr = ADDR_UNSET;
setup.type = cx->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
+ if (cx->options.radio > 0)
+ setup.mode_mask |= T_RADIO;
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
cx18_reset_tuner_gpio : NULL;
cx18_call_all(cx, tuner, s_type_addr, &setup);
diff --git a/drivers/staging/cx25821/Kconfig b/drivers/media/video/cx25821/Kconfig
similarity index 100%
rename from drivers/staging/cx25821/Kconfig
rename to drivers/media/video/cx25821/Kconfig
diff --git a/drivers/staging/cx25821/Makefile b/drivers/media/video/cx25821/Makefile
similarity index 100%
rename from drivers/staging/cx25821/Makefile
rename to drivers/media/video/cx25821/Makefile
diff --git a/drivers/staging/cx25821/cx25821-alsa.c b/drivers/media/video/cx25821/cx25821-alsa.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-alsa.c
rename to drivers/media/video/cx25821/cx25821-alsa.c
diff --git a/drivers/staging/cx25821/cx25821-audio-upstream.c b/drivers/media/video/cx25821/cx25821-audio-upstream.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-audio-upstream.c
rename to drivers/media/video/cx25821/cx25821-audio-upstream.c
diff --git a/drivers/staging/cx25821/cx25821-audio-upstream.h b/drivers/media/video/cx25821/cx25821-audio-upstream.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-audio-upstream.h
rename to drivers/media/video/cx25821/cx25821-audio-upstream.h
diff --git a/drivers/staging/cx25821/cx25821-audio.h b/drivers/media/video/cx25821/cx25821-audio.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-audio.h
rename to drivers/media/video/cx25821/cx25821-audio.h
diff --git a/drivers/staging/cx25821/cx25821-biffuncs.h b/drivers/media/video/cx25821/cx25821-biffuncs.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-biffuncs.h
rename to drivers/media/video/cx25821/cx25821-biffuncs.h
diff --git a/drivers/staging/cx25821/cx25821-cards.c b/drivers/media/video/cx25821/cx25821-cards.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-cards.c
rename to drivers/media/video/cx25821/cx25821-cards.c
diff --git a/drivers/staging/cx25821/cx25821-core.c b/drivers/media/video/cx25821/cx25821-core.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-core.c
rename to drivers/media/video/cx25821/cx25821-core.c
diff --git a/drivers/staging/cx25821/cx25821-gpio.c b/drivers/media/video/cx25821/cx25821-gpio.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-gpio.c
rename to drivers/media/video/cx25821/cx25821-gpio.c
diff --git a/drivers/staging/cx25821/cx25821-i2c.c b/drivers/media/video/cx25821/cx25821-i2c.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-i2c.c
rename to drivers/media/video/cx25821/cx25821-i2c.c
diff --git a/drivers/staging/cx25821/cx25821-medusa-defines.h b/drivers/media/video/cx25821/cx25821-medusa-defines.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-defines.h
rename to drivers/media/video/cx25821/cx25821-medusa-defines.h
diff --git a/drivers/staging/cx25821/cx25821-medusa-reg.h b/drivers/media/video/cx25821/cx25821-medusa-reg.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-reg.h
rename to drivers/media/video/cx25821/cx25821-medusa-reg.h
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/media/video/cx25821/cx25821-medusa-video.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-video.c
rename to drivers/media/video/cx25821/cx25821-medusa-video.c
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.h b/drivers/media/video/cx25821/cx25821-medusa-video.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-medusa-video.h
rename to drivers/media/video/cx25821/cx25821-medusa-video.h
diff --git a/drivers/staging/cx25821/cx25821-reg.h b/drivers/media/video/cx25821/cx25821-reg.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-reg.h
rename to drivers/media/video/cx25821/cx25821-reg.h
diff --git a/drivers/staging/cx25821/cx25821-sram.h b/drivers/media/video/cx25821/cx25821-sram.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-sram.h
rename to drivers/media/video/cx25821/cx25821-sram.h
diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c b/drivers/media/video/cx25821/cx25821-video-upstream-ch2.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream-ch2.c
rename to drivers/media/video/cx25821/cx25821-video-upstream-ch2.c
diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.h b/drivers/media/video/cx25821/cx25821-video-upstream-ch2.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream-ch2.h
rename to drivers/media/video/cx25821/cx25821-video-upstream-ch2.h
diff --git a/drivers/staging/cx25821/cx25821-video-upstream.c b/drivers/media/video/cx25821/cx25821-video-upstream.c
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream.c
rename to drivers/media/video/cx25821/cx25821-video-upstream.c
diff --git a/drivers/staging/cx25821/cx25821-video-upstream.h b/drivers/media/video/cx25821/cx25821-video-upstream.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video-upstream.h
rename to drivers/media/video/cx25821/cx25821-video-upstream.h
diff --git a/drivers/staging/cx25821/cx25821-video.c b/drivers/media/video/cx25821/cx25821-video.c
similarity index 99%
rename from drivers/staging/cx25821/cx25821-video.c
rename to drivers/media/video/cx25821/cx25821-video.c
index 084fc08..4d6907c 100644
--- a/drivers/staging/cx25821/cx25821-video.c
+++ b/drivers/media/video/cx25821/cx25821-video.c
@@ -1312,7 +1312,7 @@
return err;
}
- if (i > 2) {
+ if (i >= CX25821_NR_INPUT) {
dprintk(1, "%s(): -EINVAL\n", __func__);
return -EINVAL;
}
diff --git a/drivers/staging/cx25821/cx25821-video.h b/drivers/media/video/cx25821/cx25821-video.h
similarity index 100%
rename from drivers/staging/cx25821/cx25821-video.h
rename to drivers/media/video/cx25821/cx25821-video.h
diff --git a/drivers/staging/cx25821/cx25821.h b/drivers/media/video/cx25821/cx25821.h
similarity index 99%
rename from drivers/staging/cx25821/cx25821.h
rename to drivers/media/video/cx25821/cx25821.h
index db2615b..2d2d009 100644
--- a/drivers/staging/cx25821/cx25821.h
+++ b/drivers/media/video/cx25821/cx25821.h
@@ -98,6 +98,7 @@
#define CX25821_BOARD_CONEXANT_ATHENA10 1
#define MAX_VID_CHANNEL_NUM 12
#define VID_CHANNEL_NUM 8
+#define CX25821_NR_INPUT 2
struct cx25821_fmt {
char *name;
@@ -196,7 +197,7 @@
unsigned char radio_addr;
u32 clk_freq;
- struct cx25821_input input[2];
+ struct cx25821_input input[CX25821_NR_INPUT];
};
struct cx25821_subid {
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 4240f0b..9b747c2 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1923,6 +1923,8 @@
.driver_info = EM2860_BOARD_TERRATEC_AV350 },
{ USB_DEVICE(0x0ccd, 0x0096),
.driver_info = EM2860_BOARD_TERRATEC_GRABBY },
+ { USB_DEVICE(0x0ccd, 0x10AF),
+ .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
{ USB_DEVICE(0x0fd9, 0x0033),
.driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
{ USB_DEVICE(0x185b, 0x2870),
diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c
index 0382ea7..8775e26 100644
--- a/drivers/media/video/imx074.c
+++ b/drivers/media/video/imx074.c
@@ -12,11 +12,11 @@
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-chip-ident.h>
@@ -267,6 +267,17 @@
return 0;
}
+static int imx074_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ cfg->type = V4L2_MBUS_CSI2;
+ cfg->flags = V4L2_MBUS_CSI2_2_LANE |
+ V4L2_MBUS_CSI2_CHANNEL_0 |
+ V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+
+ return 0;
+}
+
static struct v4l2_subdev_video_ops imx074_subdev_video_ops = {
.s_stream = imx074_s_stream,
.s_mbus_fmt = imx074_s_fmt,
@@ -275,6 +286,7 @@
.enum_mbus_fmt = imx074_enum_fmt,
.g_crop = imx074_g_crop,
.cropcap = imx074_cropcap,
+ .g_mbus_config = imx074_g_mbus_config,
};
static struct v4l2_subdev_core_ops imx074_subdev_core_ops = {
@@ -286,28 +298,7 @@
.video = &imx074_subdev_video_ops,
};
-/*
- * We have to provide soc-camera operations, but we don't have anything to say
- * there. The MIPI CSI2 driver will provide .query_bus_param and .set_bus_param
- */
-static unsigned long imx074_query_bus_param(struct soc_camera_device *icd)
-{
- return 0;
-}
-
-static int imx074_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return -EINVAL;
-}
-
-static struct soc_camera_ops imx074_ops = {
- .query_bus_param = imx074_query_bus_param,
- .set_bus_param = imx074_set_bus_param,
-};
-
-static int imx074_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int imx074_video_probe(struct i2c_client *client)
{
int ret;
u16 id;
@@ -417,17 +408,10 @@
const struct i2c_device_id *did)
{
struct imx074 *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "IMX074: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "IMX074: missing platform data!\n");
return -EINVAL;
@@ -445,12 +429,10 @@
v4l2_i2c_subdev_init(&priv->subdev, client, &imx074_subdev_ops);
- icd->ops = &imx074_ops;
priv->fmt = &imx074_colour_fmts[0];
- ret = imx074_video_probe(icd, client);
+ ret = imx074_video_probe(client);
if (ret < 0) {
- icd->ops = NULL;
kfree(priv);
return ret;
}
@@ -461,10 +443,8 @@
static int imx074_remove(struct i2c_client *client)
{
struct imx074 *priv = to_imx074(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
- icd->ops = NULL;
if (icl->free_bus)
icl->free_bus(icl);
kfree(priv);
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 0fb7552..41108a9 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1180,6 +1180,8 @@
setup.addr = ADDR_UNSET;
setup.type = itv->options.tuner;
setup.mode_mask = T_ANALOG_TV; /* matches TV tuners */
+ if (itv->options.radio > 0)
+ setup.mode_mask |= T_RADIO;
setup.tuner_callback = (setup.type == TUNER_XC2028) ?
ivtv_reset_tuner_gpio : NULL;
ivtv_call_all(itv, tuner, s_type_addr, &setup);
diff --git a/drivers/media/video/marvell-ccic/mcam-core.c b/drivers/media/video/marvell-ccic/mcam-core.c
index 1141b97..80ec64d 100644
--- a/drivers/media/video/marvell-ccic/mcam-core.c
+++ b/drivers/media/video/marvell-ccic/mcam-core.c
@@ -883,7 +883,8 @@
* Videobuf2 interface code.
*/
-static int mcam_vb_queue_setup(struct vb2_queue *vq, unsigned int *nbufs,
+static int mcam_vb_queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt, unsigned int *nbufs,
unsigned int *num_planes, unsigned int sizes[],
void *alloc_ctxs[])
{
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 9594b52..12897e8 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -738,9 +738,10 @@
* Queue operations
*/
-static int m2mtest_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned int sizes[],
- void *alloc_ctxs[])
+static int m2mtest_queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
{
struct m2mtest_ctx *ctx = vb2_get_drv_priv(vq);
struct m2mtest_q_data *q_data;
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 4da9cca..63ae5c6 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -13,9 +13,11 @@
#include <linux/i2c.h>
#include <linux/log2.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-chip-ident.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
/*
* mt9m001 i2c address 0x5d
@@ -84,15 +86,19 @@
struct mt9m001 {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* exposure/auto-exposure cluster */
+ struct v4l2_ctrl *autoexposure;
+ struct v4l2_ctrl *exposure;
+ };
struct v4l2_rect rect; /* Sensor window */
const struct mt9m001_datafmt *fmt;
const struct mt9m001_datafmt *fmts;
int num_fmts;
int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
- unsigned int gain;
- unsigned int exposure;
+ unsigned int total_h;
unsigned short y_skip_top; /* Lines to skip at the top */
- unsigned char autoexposure;
};
static struct mt9m001 *to_mt9m001(const struct i2c_client *client)
@@ -165,54 +171,13 @@
return 0;
}
-static int mt9m001_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
-
- /* Only one width bit may be set */
- if (!is_power_of_2(width_flag))
- return -EINVAL;
-
- if (icl->set_bus_param)
- return icl->set_bus_param(icl, width_flag);
-
- /*
- * Without board specific bus width settings we only support the
- * sensors native bus width
- */
- if (width_flag == SOCAM_DATAWIDTH_10)
- return 0;
-
- return -EINVAL;
-}
-
-static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- /* MT9M001 has all capture_format parameters fixed */
- unsigned long flags = SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER;
-
- if (icl->query_bus_param)
- flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
- else
- flags |= SOCAM_DATAWIDTH_10;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct mt9m001 *mt9m001 = to_mt9m001(client);
struct v4l2_rect rect = a->c;
- struct soc_camera_device *icd = client->dev.platform_data;
int ret;
const u16 hblank = 9, vblank = 25;
- unsigned int total_h;
if (mt9m001->fmts == mt9m001_colour_fmts)
/*
@@ -231,7 +196,7 @@
soc_camera_limit_side(&rect.top, &rect.height,
MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT);
- total_h = rect.height + mt9m001->y_skip_top + vblank;
+ mt9m001->total_h = rect.height + mt9m001->y_skip_top + vblank;
/* Blanking and start values - default... */
ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank);
@@ -240,7 +205,7 @@
/*
* The caller provides a supported format, as verified per
- * call to icd->try_fmt()
+ * call to .try_mbus_fmt()
*/
if (!ret)
ret = reg_write(client, MT9M001_COLUMN_START, rect.left);
@@ -251,17 +216,8 @@
if (!ret)
ret = reg_write(client, MT9M001_WINDOW_HEIGHT,
rect.height + mt9m001->y_skip_top - 1);
- if (!ret && mt9m001->autoexposure) {
- ret = reg_write(client, MT9M001_SHUTTER_WIDTH, total_h);
- if (!ret) {
- const struct v4l2_queryctrl *qctrl =
- soc_camera_find_qctrl(icd->ops,
- V4L2_CID_EXPOSURE);
- mt9m001->exposure = (524 + (total_h - 1) *
- (qctrl->maximum - qctrl->minimum)) /
- 1048 + qctrl->minimum;
- }
- }
+ if (!ret && v4l2_ctrl_g_ctrl(mt9m001->autoexposure) == V4L2_EXPOSURE_AUTO)
+ ret = reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h);
if (!ret)
mt9m001->rect = rect;
@@ -421,107 +377,48 @@
}
#endif
-static const struct v4l2_queryctrl mt9m001_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Gain",
- .minimum = 0,
- .maximum = 127,
- .step = 1,
- .default_value = 64,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Exposure",
- .minimum = 1,
- .maximum = 255,
- .step = 1,
- .default_value = 255,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_EXPOSURE_AUTO,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Automatic Exposure",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- }
-};
-
-static struct soc_camera_ops mt9m001_ops = {
- .set_bus_param = mt9m001_set_bus_param,
- .query_bus_param = mt9m001_query_bus_param,
- .controls = mt9m001_controls,
- .num_controls = ARRAY_SIZE(mt9m001_controls),
-};
-
-static int mt9m001_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9m001 *mt9m001 = to_mt9m001(client);
- int data;
+ struct mt9m001 *mt9m001 = container_of(ctrl->handler,
+ struct mt9m001, hdl);
+ s32 min, max;
switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- data = reg_read(client, MT9M001_READ_OPTIONS2);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x8000);
- break;
case V4L2_CID_EXPOSURE_AUTO:
- ctrl->value = mt9m001->autoexposure;
- break;
- case V4L2_CID_GAIN:
- ctrl->value = mt9m001->gain;
- break;
- case V4L2_CID_EXPOSURE:
- ctrl->value = mt9m001->exposure;
+ min = mt9m001->exposure->minimum;
+ max = mt9m001->exposure->maximum;
+ mt9m001->exposure->val =
+ (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min;
break;
}
return 0;
}
-static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct mt9m001 *mt9m001 = container_of(ctrl->handler,
+ struct mt9m001, hdl);
+ struct v4l2_subdev *sd = &mt9m001->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9m001 *mt9m001 = to_mt9m001(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- const struct v4l2_queryctrl *qctrl;
+ struct v4l2_ctrl *exp = mt9m001->exposure;
int data;
- qctrl = soc_camera_find_qctrl(&mt9m001_ops, ctrl->id);
-
- if (!qctrl)
- return -EINVAL;
-
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000);
else
data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000);
if (data < 0)
return -EIO;
- break;
+ return 0;
+
case V4L2_CID_GAIN:
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
/* See Datasheet Table 7, Gain settings. */
- if (ctrl->value <= qctrl->default_value) {
+ if (ctrl->val <= ctrl->default_value) {
/* Pack it into 0..1 step 0.125, register values 0..8 */
- unsigned long range = qctrl->default_value - qctrl->minimum;
- data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
+ unsigned long range = ctrl->default_value - ctrl->minimum;
+ data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range;
dev_dbg(&client->dev, "Setting gain %d\n", data);
data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
@@ -530,8 +427,8 @@
} else {
/* Pack it into 1.125..15 variable step, register values 9..67 */
/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
- unsigned long range = qctrl->maximum - qctrl->default_value - 1;
- unsigned long gain = ((ctrl->value - qctrl->default_value - 1) *
+ unsigned long range = ctrl->maximum - ctrl->default_value - 1;
+ unsigned long gain = ((ctrl->val - ctrl->default_value - 1) *
111 + range / 2) / range + 9;
if (gain <= 32)
@@ -547,66 +444,44 @@
if (data < 0)
return -EIO;
}
+ return 0;
- /* Success */
- mt9m001->gain = ctrl->value;
- break;
- case V4L2_CID_EXPOSURE:
- /* mt9m001 has maximum == default */
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
- else {
- unsigned long range = qctrl->maximum - qctrl->minimum;
- unsigned long shutter = ((ctrl->value - qctrl->minimum) * 1048 +
+ case V4L2_CID_EXPOSURE_AUTO:
+ if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
+ unsigned long range = exp->maximum - exp->minimum;
+ unsigned long shutter = ((exp->val - exp->minimum) * 1048 +
range / 2) / range + 1;
dev_dbg(&client->dev,
"Setting shutter width from %d to %lu\n",
- reg_read(client, MT9M001_SHUTTER_WIDTH),
- shutter);
+ reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0)
return -EIO;
- mt9m001->exposure = ctrl->value;
- mt9m001->autoexposure = 0;
- }
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- if (ctrl->value) {
+ } else {
const u16 vblank = 25;
- unsigned int total_h = mt9m001->rect.height +
+
+ mt9m001->total_h = mt9m001->rect.height +
mt9m001->y_skip_top + vblank;
- if (reg_write(client, MT9M001_SHUTTER_WIDTH,
- total_h) < 0)
+ if (reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h) < 0)
return -EIO;
- qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE);
- mt9m001->exposure = (524 + (total_h - 1) *
- (qctrl->maximum - qctrl->minimum)) /
- 1048 + qctrl->minimum;
- mt9m001->autoexposure = 1;
- } else
- mt9m001->autoexposure = 0;
- break;
+ }
+ return 0;
}
- return 0;
+ return -EINVAL;
}
/*
* Interface active, can use i2c. If it fails, it can indeed mean, that
* this wasn't our capture interface, so, we wait for the right one
*/
-static int mt9m001_video_probe(struct soc_camera_device *icd,
+static int mt9m001_video_probe(struct soc_camera_link *icl,
struct i2c_client *client)
{
struct mt9m001 *mt9m001 = to_mt9m001(client);
- struct soc_camera_link *icl = to_soc_camera_link(icd);
s32 data;
unsigned long flags;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/* Enable the chip */
data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
dev_dbg(&client->dev, "write: %d\n", data);
@@ -661,18 +536,11 @@
dev_err(&client->dev, "Failed to initialise the camera\n");
/* mt9m001_init() has reset the chip, returning registers to defaults */
- mt9m001->gain = 64;
- mt9m001->exposure = 255;
-
- return ret;
+ return v4l2_ctrl_handler_setup(&mt9m001->hdl);
}
-static void mt9m001_video_remove(struct soc_camera_device *icd)
+static void mt9m001_video_remove(struct soc_camera_link *icl)
{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- dev_dbg(icd->pdev, "Video removed: %p, %p\n",
- icd->parent, icd->vdev);
if (icl->free_bus)
icl->free_bus(icl);
}
@@ -687,9 +555,12 @@
return 0;
}
+static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = {
+ .g_volatile_ctrl = mt9m001_g_volatile_ctrl,
+ .s_ctrl = mt9m001_s_ctrl,
+};
+
static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
- .g_ctrl = mt9m001_g_ctrl,
- .s_ctrl = mt9m001_s_ctrl,
.g_chip_ident = mt9m001_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = mt9m001_g_register,
@@ -710,6 +581,40 @@
return 0;
}
+static int mt9m001_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ /* MT9M001 has all capture_format parameters fixed */
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
+static int mt9m001_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ const struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ struct mt9m001 *mt9m001 = to_mt9m001(client);
+ unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample;
+
+ if (icl->set_bus_param)
+ return icl->set_bus_param(icl, 1 << (bps - 1));
+
+ /*
+ * Without board specific bus width settings we only support the
+ * sensors native bus width
+ */
+ return bps == 10 ? 0 : -EINVAL;
+}
+
static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
.s_stream = mt9m001_s_stream,
.s_mbus_fmt = mt9m001_s_fmt,
@@ -719,6 +624,8 @@
.g_crop = mt9m001_g_crop,
.cropcap = mt9m001_cropcap,
.enum_mbus_fmt = mt9m001_enum_fmt,
+ .g_mbus_config = mt9m001_g_mbus_config,
+ .s_mbus_config = mt9m001_s_mbus_config,
};
static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
@@ -735,17 +642,10 @@
const struct i2c_device_id *did)
{
struct mt9m001 *mt9m001;
- struct soc_camera_device *icd = client->dev.platform_data;
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "MT9M001: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "MT9M001 driver needs platform data\n");
return -EINVAL;
@@ -762,25 +662,40 @@
return -ENOMEM;
v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
+ v4l2_ctrl_handler_init(&mt9m001->hdl, 4);
+ v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
+ V4L2_CID_GAIN, 0, 127, 1, 64);
+ mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
+ V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+ /*
+ * Simulated autoexposure. If enabled, we calculate shutter width
+ * ourselves in the driver based on vertical blanking and frame width
+ */
+ mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl,
+ &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+ V4L2_EXPOSURE_AUTO);
+ mt9m001->subdev.ctrl_handler = &mt9m001->hdl;
+ if (mt9m001->hdl.error) {
+ int err = mt9m001->hdl.error;
+
+ kfree(mt9m001);
+ return err;
+ }
+ v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure,
+ V4L2_EXPOSURE_MANUAL, true);
/* Second stage probe - when a capture adapter is there */
- icd->ops = &mt9m001_ops;
-
mt9m001->y_skip_top = 0;
mt9m001->rect.left = MT9M001_COLUMN_SKIP;
mt9m001->rect.top = MT9M001_ROW_SKIP;
mt9m001->rect.width = MT9M001_MAX_WIDTH;
mt9m001->rect.height = MT9M001_MAX_HEIGHT;
- /*
- * Simulated autoexposure. If enabled, we calculate shutter width
- * ourselves in the driver based on vertical blanking and frame width
- */
- mt9m001->autoexposure = 1;
-
- ret = mt9m001_video_probe(icd, client);
+ ret = mt9m001_video_probe(icl, client);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&mt9m001->hdl);
kfree(mt9m001);
}
@@ -790,10 +705,11 @@
static int mt9m001_remove(struct i2c_client *client)
{
struct mt9m001 *mt9m001 = to_mt9m001(client);
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
- icd->ops = NULL;
- mt9m001_video_remove(icd);
+ v4l2_device_unregister_subdev(&mt9m001->subdev);
+ v4l2_ctrl_handler_free(&mt9m001->hdl);
+ mt9m001_video_remove(icl);
kfree(mt9m001);
return 0;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 07af26e..f023cc0 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -13,10 +13,12 @@
#include <linux/log2.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-chip-ident.h>
#include <media/soc_camera.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-chip-ident.h>
/*
* MT9M111, MT9M112 and MT9M131:
@@ -177,6 +179,8 @@
struct mt9m111 {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
+ struct v4l2_ctrl *gain;
int model; /* V4L2_IDENT_MT9M111 or V4L2_IDENT_MT9M112 code
* from v4l2-chip-ident.h */
enum mt9m111_context context;
@@ -185,13 +189,8 @@
int power_count;
const struct mt9m111_datafmt *fmt;
int lastpage; /* PageMap cache value */
- unsigned int gain;
- unsigned char autoexposure;
unsigned char datawidth;
unsigned int powered:1;
- unsigned int hflip:1;
- unsigned int vflip:1;
- unsigned int autowhitebalance:1;
};
static struct mt9m111 *to_mt9m111(const struct i2c_client *client)
@@ -363,21 +362,6 @@
return ret;
}
-static unsigned long mt9m111_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long flags = SOCAM_MASTER | SOCAM_PCLK_SAMPLE_RISING |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static int mt9m111_set_bus_param(struct soc_camera_device *icd, unsigned long f)
-{
- return 0;
-}
-
static int mt9m111_make_rect(struct mt9m111 *mt9m111,
struct v4l2_rect *rect)
{
@@ -660,50 +644,6 @@
}
#endif
-static const struct v4l2_queryctrl mt9m111_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Verticaly",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontaly",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, { /* gain = 1/32*val (=>gain=1 if val==32) */
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Gain",
- .minimum = 0,
- .maximum = 63 * 2 * 2,
- .step = 1,
- .default_value = 32,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_EXPOSURE_AUTO,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Auto Exposure",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- }
-};
-
-static struct soc_camera_ops mt9m111_ops = {
- .query_bus_param = mt9m111_query_bus_param,
- .set_bus_param = mt9m111_set_bus_param,
- .controls = mt9m111_controls,
- .num_controls = ARRAY_SIZE(mt9m111_controls),
-};
-
static int mt9m111_set_flip(struct mt9m111 *mt9m111, int flip, int mask)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
@@ -744,7 +684,6 @@
if (gain > 63 * 2 * 2)
return -EINVAL;
- mt9m111->gain = gain;
if ((gain >= 64 * 2) && (gain < 63 * 2 * 2))
val = (1 << 10) | (1 << 9) | (gain / 4);
else if ((gain >= 64) && (gain < 64 * 2))
@@ -758,118 +697,47 @@
static int mt9m111_set_autoexposure(struct mt9m111 *mt9m111, int on)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
- int ret;
if (on)
- ret = reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
- else
- ret = reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
-
- if (!ret)
- mt9m111->autoexposure = on;
-
- return ret;
+ return reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
+ return reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOEXPO_EN);
}
static int mt9m111_set_autowhitebalance(struct mt9m111 *mt9m111, int on)
{
struct i2c_client *client = v4l2_get_subdevdata(&mt9m111->subdev);
- int ret;
if (on)
- ret = reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
- else
- ret = reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
-
- if (!ret)
- mt9m111->autowhitebalance = on;
-
- return ret;
+ return reg_set(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
+ return reg_clear(OPER_MODE_CTRL, MT9M111_OPMODE_AUTOWHITEBAL_EN);
}
-static int mt9m111_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9m111_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
- int data;
+ struct mt9m111 *mt9m111 = container_of(ctrl->handler,
+ struct mt9m111, hdl);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- if (mt9m111->context == HIGHPOWER)
- data = reg_read(READ_MODE_B);
- else
- data = reg_read(READ_MODE_A);
-
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & MT9M111_RMB_MIRROR_ROWS);
- break;
- case V4L2_CID_HFLIP:
- if (mt9m111->context == HIGHPOWER)
- data = reg_read(READ_MODE_B);
- else
- data = reg_read(READ_MODE_A);
-
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & MT9M111_RMB_MIRROR_COLS);
- break;
- case V4L2_CID_GAIN:
- data = mt9m111_get_global_gain(mt9m111);
- if (data < 0)
- return data;
- ctrl->value = data;
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- ctrl->value = mt9m111->autoexposure;
- break;
- case V4L2_CID_AUTO_WHITE_BALANCE:
- ctrl->value = mt9m111->autowhitebalance;
- break;
- }
- return 0;
-}
-
-static int mt9m111_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
- const struct v4l2_queryctrl *qctrl;
- int ret;
-
- qctrl = soc_camera_find_qctrl(&mt9m111_ops, ctrl->id);
- if (!qctrl)
- return -EINVAL;
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- mt9m111->vflip = ctrl->value;
- ret = mt9m111_set_flip(mt9m111, ctrl->value,
+ return mt9m111_set_flip(mt9m111, ctrl->val,
MT9M111_RMB_MIRROR_ROWS);
- break;
case V4L2_CID_HFLIP:
- mt9m111->hflip = ctrl->value;
- ret = mt9m111_set_flip(mt9m111, ctrl->value,
+ return mt9m111_set_flip(mt9m111, ctrl->val,
MT9M111_RMB_MIRROR_COLS);
- break;
case V4L2_CID_GAIN:
- ret = mt9m111_set_global_gain(mt9m111, ctrl->value);
- break;
+ return mt9m111_set_global_gain(mt9m111, ctrl->val);
case V4L2_CID_EXPOSURE_AUTO:
- ret = mt9m111_set_autoexposure(mt9m111, ctrl->value);
- break;
+ return mt9m111_set_autoexposure(mt9m111, ctrl->val);
case V4L2_CID_AUTO_WHITE_BALANCE:
- ret = mt9m111_set_autowhitebalance(mt9m111, ctrl->value);
- break;
- default:
- ret = -EINVAL;
+ return mt9m111_set_autowhitebalance(mt9m111, ctrl->val);
}
- return ret;
+ return -EINVAL;
}
static int mt9m111_suspend(struct mt9m111 *mt9m111)
{
- mt9m111->gain = mt9m111_get_global_gain(mt9m111);
+ v4l2_ctrl_s_ctrl(mt9m111->gain, mt9m111_get_global_gain(mt9m111));
return 0;
}
@@ -879,11 +747,7 @@
mt9m111_set_context(mt9m111, mt9m111->context);
mt9m111_set_pixfmt(mt9m111, mt9m111->fmt->code);
mt9m111_setup_rect(mt9m111, &mt9m111->rect);
- mt9m111_set_flip(mt9m111, mt9m111->hflip, MT9M111_RMB_MIRROR_COLS);
- mt9m111_set_flip(mt9m111, mt9m111->vflip, MT9M111_RMB_MIRROR_ROWS);
- mt9m111_set_global_gain(mt9m111, mt9m111->gain);
- mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
- mt9m111_set_autowhitebalance(mt9m111, mt9m111->autowhitebalance);
+ v4l2_ctrl_handler_setup(&mt9m111->hdl);
}
static int mt9m111_resume(struct mt9m111 *mt9m111)
@@ -911,8 +775,6 @@
ret = mt9m111_reset(mt9m111);
if (!ret)
ret = mt9m111_set_context(mt9m111, mt9m111->context);
- if (!ret)
- ret = mt9m111_set_autoexposure(mt9m111, mt9m111->autoexposure);
if (ret)
dev_err(&client->dev, "mt9m111 init failed: %d\n", ret);
return ret;
@@ -922,22 +784,12 @@
* Interface active, can use i2c. If it fails, it can indeed mean, that
* this wasn't our capture interface, so, we wait for the right one
*/
-static int mt9m111_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int mt9m111_video_probe(struct i2c_client *client)
{
struct mt9m111 *mt9m111 = to_mt9m111(client);
s32 data;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
- mt9m111->lastpage = -1;
-
- mt9m111->autoexposure = 1;
- mt9m111->autowhitebalance = 1;
-
data = reg_read(CHIP_VERSION);
switch (data) {
@@ -951,17 +803,16 @@
dev_info(&client->dev, "Detected a MT9M112 chip ID %x\n", data);
break;
default:
- ret = -ENODEV;
dev_err(&client->dev,
"No MT9M111/MT9M112/MT9M131 chip detected register read %x\n",
data);
- goto ei2c;
+ return -ENODEV;
}
ret = mt9m111_init(mt9m111);
-
-ei2c:
- return ret;
+ if (ret)
+ return ret;
+ return v4l2_ctrl_handler_setup(&mt9m111->hdl);
}
static int mt9m111_s_power(struct v4l2_subdev *sd, int on)
@@ -998,9 +849,11 @@
return ret;
}
+static const struct v4l2_ctrl_ops mt9m111_ctrl_ops = {
+ .s_ctrl = mt9m111_s_ctrl,
+};
+
static struct v4l2_subdev_core_ops mt9m111_subdev_core_ops = {
- .g_ctrl = mt9m111_g_ctrl,
- .s_ctrl = mt9m111_s_ctrl,
.g_chip_ident = mt9m111_g_chip_ident,
.s_power = mt9m111_s_power,
#ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -1019,6 +872,21 @@
return 0;
}
+static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
static struct v4l2_subdev_video_ops mt9m111_subdev_video_ops = {
.s_mbus_fmt = mt9m111_s_fmt,
.g_mbus_fmt = mt9m111_g_fmt,
@@ -1027,6 +895,7 @@
.g_crop = mt9m111_g_crop,
.cropcap = mt9m111_cropcap,
.enum_mbus_fmt = mt9m111_enum_fmt,
+ .g_mbus_config = mt9m111_g_mbus_config,
};
static struct v4l2_subdev_ops mt9m111_subdev_ops = {
@@ -1038,17 +907,10 @@
const struct i2c_device_id *did)
{
struct mt9m111 *mt9m111;
- struct soc_camera_device *icd = client->dev.platform_data;
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "mt9m111: soc-camera data missing!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "mt9m111: driver needs platform data\n");
return -EINVAL;
@@ -1065,19 +927,37 @@
return -ENOMEM;
v4l2_i2c_subdev_init(&mt9m111->subdev, client, &mt9m111_subdev_ops);
+ v4l2_ctrl_handler_init(&mt9m111->hdl, 5);
+ v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+ mt9m111->gain = v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
+ V4L2_CID_GAIN, 0, 63 * 2 * 2, 1, 32);
+ v4l2_ctrl_new_std_menu(&mt9m111->hdl,
+ &mt9m111_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+ V4L2_EXPOSURE_AUTO);
+ mt9m111->subdev.ctrl_handler = &mt9m111->hdl;
+ if (mt9m111->hdl.error) {
+ int err = mt9m111->hdl.error;
+
+ kfree(mt9m111);
+ return err;
+ }
/* Second stage probe - when a capture adapter is there */
- icd->ops = &mt9m111_ops;
-
mt9m111->rect.left = MT9M111_MIN_DARK_COLS;
mt9m111->rect.top = MT9M111_MIN_DARK_ROWS;
mt9m111->rect.width = MT9M111_MAX_WIDTH;
mt9m111->rect.height = MT9M111_MAX_HEIGHT;
mt9m111->fmt = &mt9m111_colour_fmts[0];
+ mt9m111->lastpage = -1;
- ret = mt9m111_video_probe(icd, client);
+ ret = mt9m111_video_probe(client);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&mt9m111->hdl);
kfree(mt9m111);
}
@@ -1087,9 +967,9 @@
static int mt9m111_remove(struct i2c_client *client)
{
struct mt9m111 *mt9m111 = to_mt9m111(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- icd->ops = NULL;
+ v4l2_device_unregister_subdev(&mt9m111->subdev);
+ v4l2_ctrl_handler_free(&mt9m111->hdl);
kfree(mt9m111);
return 0;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 30547cc..7ee84cc 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -13,11 +13,20 @@
#include <linux/log2.h>
#include <linux/pm.h>
#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
#include <media/soc_camera.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+
+/*
+ * ATTENTION: this driver still cannot be used outside of the soc-camera
+ * framework because of its PM implementation, using the video_device node.
+ * If hardware becomes available for testing, alternative PM approaches shall
+ * be considered and tested.
+ */
/*
* mt9t031 i2c address 0x5d
@@ -57,21 +66,20 @@
#define MT9T031_COLUMN_SKIP 32
#define MT9T031_ROW_SKIP 20
-#define MT9T031_BUS_PARAM (SOCAM_PCLK_SAMPLE_RISING | \
- SOCAM_PCLK_SAMPLE_FALLING | SOCAM_HSYNC_ACTIVE_HIGH | \
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH | \
- SOCAM_MASTER | SOCAM_DATAWIDTH_10)
-
struct mt9t031 {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* exposure/auto-exposure cluster */
+ struct v4l2_ctrl *autoexposure;
+ struct v4l2_ctrl *exposure;
+ };
struct v4l2_rect rect; /* Sensor window */
int model; /* V4L2_IDENT_MT9T031* codes from v4l2-chip-ident.h */
u16 xskip;
u16 yskip;
- unsigned int gain;
+ unsigned int total_h;
unsigned short y_skip_top; /* Lines to skip at the top */
- unsigned int exposure;
- unsigned char autoexposure;
};
static struct mt9t031 *to_mt9t031(const struct i2c_client *client)
@@ -179,95 +187,6 @@
return 0;
}
-static int mt9t031_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-
- /* The caller should have queried our parameters, check anyway */
- if (flags & ~MT9T031_BUS_PARAM)
- return -EINVAL;
-
- if (flags & SOCAM_PCLK_SAMPLE_FALLING)
- reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
- else
- reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
-
- return 0;
-}
-
-static unsigned long mt9t031_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- return soc_camera_apply_sensor_flags(icl, MT9T031_BUS_PARAM);
-}
-
-enum {
- MT9T031_CTRL_VFLIP,
- MT9T031_CTRL_HFLIP,
- MT9T031_CTRL_GAIN,
- MT9T031_CTRL_EXPOSURE,
- MT9T031_CTRL_EXPOSURE_AUTO,
-};
-
-static const struct v4l2_queryctrl mt9t031_controls[] = {
- [MT9T031_CTRL_VFLIP] = {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- [MT9T031_CTRL_HFLIP] = {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- [MT9T031_CTRL_GAIN] = {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Gain",
- .minimum = 0,
- .maximum = 127,
- .step = 1,
- .default_value = 64,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- },
- [MT9T031_CTRL_EXPOSURE] = {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Exposure",
- .minimum = 1,
- .maximum = 255,
- .step = 1,
- .default_value = 255,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- },
- [MT9T031_CTRL_EXPOSURE_AUTO] = {
- .id = V4L2_CID_EXPOSURE_AUTO,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Automatic Exposure",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- }
-};
-
-static struct soc_camera_ops mt9t031_ops = {
- .set_bus_param = mt9t031_set_bus_param,
- .query_bus_param = mt9t031_query_bus_param,
- .controls = mt9t031_controls,
- .num_controls = ARRAY_SIZE(mt9t031_controls),
-};
-
/* target must be _even_ */
static u16 mt9t031_skip(s32 *source, s32 target, s32 max)
{
@@ -353,7 +272,7 @@
/*
* The caller provides a supported format, as guaranteed by
- * icd->try_fmt_cap(), soc_camera_s_crop() and soc_camera_cropcap()
+ * .try_mbus_fmt(), soc_camera_s_crop() and soc_camera_cropcap()
*/
if (ret >= 0)
ret = reg_write(client, MT9T031_COLUMN_START, rect->left);
@@ -364,17 +283,10 @@
if (ret >= 0)
ret = reg_write(client, MT9T031_WINDOW_HEIGHT,
rect->height + mt9t031->y_skip_top - 1);
- if (ret >= 0 && mt9t031->autoexposure) {
- unsigned int total_h = rect->height + mt9t031->y_skip_top + vblank;
- ret = set_shutter(client, total_h);
- if (ret >= 0) {
- const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
- const struct v4l2_queryctrl *qctrl =
- &mt9t031_controls[MT9T031_CTRL_EXPOSURE];
- mt9t031->exposure = (shutter_max / 2 + (total_h - 1) *
- (qctrl->maximum - qctrl->minimum)) /
- shutter_max + qctrl->minimum;
- }
+ if (ret >= 0 && v4l2_ctrl_g_ctrl(mt9t031->autoexposure) == V4L2_EXPOSURE_AUTO) {
+ mt9t031->total_h = rect->height + mt9t031->y_skip_top + vblank;
+
+ ret = set_shutter(client, mt9t031->total_h);
}
/* Re-enable register update, commit all changes */
@@ -543,71 +455,57 @@
}
#endif
-static int mt9t031_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9t031_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
- int data;
+ struct mt9t031 *mt9t031 = container_of(ctrl->handler,
+ struct mt9t031, hdl);
+ const u32 shutter_max = MT9T031_MAX_HEIGHT + MT9T031_VERTICAL_BLANK;
+ s32 min, max;
switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- data = reg_read(client, MT9T031_READ_MODE_2);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x8000);
- break;
- case V4L2_CID_HFLIP:
- data = reg_read(client, MT9T031_READ_MODE_2);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x4000);
- break;
case V4L2_CID_EXPOSURE_AUTO:
- ctrl->value = mt9t031->autoexposure;
- break;
- case V4L2_CID_GAIN:
- ctrl->value = mt9t031->gain;
- break;
- case V4L2_CID_EXPOSURE:
- ctrl->value = mt9t031->exposure;
+ min = mt9t031->exposure->minimum;
+ max = mt9t031->exposure->maximum;
+ mt9t031->exposure->val =
+ (shutter_max / 2 + (mt9t031->total_h - 1) * (max - min))
+ / shutter_max + min;
break;
}
return 0;
}
-static int mt9t031_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9t031_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct mt9t031 *mt9t031 = container_of(ctrl->handler,
+ struct mt9t031, hdl);
+ struct v4l2_subdev *sd = &mt9t031->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct mt9t031 *mt9t031 = to_mt9t031(client);
- const struct v4l2_queryctrl *qctrl;
+ struct v4l2_ctrl *exp = mt9t031->exposure;
int data;
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, MT9T031_READ_MODE_2, 0x8000);
else
data = reg_clear(client, MT9T031_READ_MODE_2, 0x8000);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_HFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, MT9T031_READ_MODE_2, 0x4000);
else
data = reg_clear(client, MT9T031_READ_MODE_2, 0x4000);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_GAIN:
- qctrl = &mt9t031_controls[MT9T031_CTRL_GAIN];
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
/* See Datasheet Table 7, Gain settings. */
- if (ctrl->value <= qctrl->default_value) {
+ if (ctrl->val <= ctrl->default_value) {
/* Pack it into 0..1 step 0.125, register values 0..8 */
- unsigned long range = qctrl->default_value - qctrl->minimum;
- data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range;
+ unsigned long range = ctrl->default_value - ctrl->minimum;
+ data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range;
dev_dbg(&client->dev, "Setting gain %d\n", data);
data = reg_write(client, MT9T031_GLOBAL_GAIN, data);
@@ -616,9 +514,9 @@
} else {
/* Pack it into 1.125..128 variable step, register values 9..0x7860 */
/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
- unsigned long range = qctrl->maximum - qctrl->default_value - 1;
+ unsigned long range = ctrl->maximum - ctrl->default_value - 1;
/* calculated gain: map 65..127 to 9..1024 step 0.125 */
- unsigned long gain = ((ctrl->value - qctrl->default_value - 1) *
+ unsigned long gain = ((ctrl->val - ctrl->default_value - 1) *
1015 + range / 2) / range + 9;
if (gain <= 32) /* calculated gain 9..32 -> 9..32 */
@@ -635,19 +533,13 @@
if (data < 0)
return -EIO;
}
+ return 0;
- /* Success */
- mt9t031->gain = ctrl->value;
- break;
- case V4L2_CID_EXPOSURE:
- qctrl = &mt9t031_controls[MT9T031_CTRL_EXPOSURE];
- /* mt9t031 has maximum == default */
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
- else {
- const unsigned long range = qctrl->maximum - qctrl->minimum;
- const u32 shutter = ((ctrl->value - qctrl->minimum) * 1048 +
- range / 2) / range + 1;
+ case V4L2_CID_EXPOSURE_AUTO:
+ if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
+ unsigned int range = exp->maximum - exp->minimum;
+ unsigned int shutter = ((exp->val - exp->minimum) * 1048 +
+ range / 2) / range + 1;
u32 old;
get_shutter(client, &old);
@@ -655,27 +547,15 @@
old, shutter);
if (set_shutter(client, shutter) < 0)
return -EIO;
- mt9t031->exposure = ctrl->value;
- mt9t031->autoexposure = 0;
- }
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- if (ctrl->value) {
+ } else {
const u16 vblank = MT9T031_VERTICAL_BLANK;
- const u32 shutter_max = MT9T031_MAX_HEIGHT + vblank;
- unsigned int total_h = mt9t031->rect.height +
+ mt9t031->total_h = mt9t031->rect.height +
mt9t031->y_skip_top + vblank;
- if (set_shutter(client, total_h) < 0)
+ if (set_shutter(client, mt9t031->total_h) < 0)
return -EIO;
- qctrl = &mt9t031_controls[MT9T031_CTRL_EXPOSURE];
- mt9t031->exposure = (shutter_max / 2 + (total_h - 1) *
- (qctrl->maximum - qctrl->minimum)) /
- shutter_max + qctrl->minimum;
- mt9t031->autoexposure = 1;
- } else
- mt9t031->autoexposure = 0;
- break;
+ }
+ return 0;
default:
return -EINVAL;
}
@@ -700,8 +580,7 @@
static int mt9t031_runtime_resume(struct device *dev)
{
struct video_device *vdev = to_video_device(dev);
- struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ struct v4l2_subdev *sd = soc_camera_vdev_to_subdev(vdev);
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct mt9t031 *mt9t031 = to_mt9t031(client);
@@ -734,6 +613,19 @@
.pm = &mt9t031_dev_pm_ops,
};
+static int mt9t031_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct video_device *vdev = soc_camera_i2c_to_vdev(client);
+
+ if (on)
+ vdev->dev.type = &mt9t031_dev_type;
+ else
+ vdev->dev.type = NULL;
+
+ return 0;
+}
+
/*
* Interface active, can use i2c. If it fails, it can indeed mean, that
* this wasn't our capture interface, so, we wait for the right one
@@ -741,7 +633,6 @@
static int mt9t031_video_probe(struct i2c_client *client)
{
struct mt9t031 *mt9t031 = to_mt9t031(client);
- struct video_device *vdev = soc_camera_i2c_to_vdev(client);
s32 data;
int ret;
@@ -768,11 +659,7 @@
if (ret < 0)
dev_err(&client->dev, "Failed to initialise the camera\n");
else
- vdev->dev.type = &mt9t031_dev_type;
-
- /* mt9t031_idle() has reset the chip to default. */
- mt9t031->exposure = 255;
- mt9t031->gain = 64;
+ v4l2_ctrl_handler_setup(&mt9t031->hdl);
return ret;
}
@@ -787,10 +674,14 @@
return 0;
}
+static const struct v4l2_ctrl_ops mt9t031_ctrl_ops = {
+ .g_volatile_ctrl = mt9t031_g_volatile_ctrl,
+ .s_ctrl = mt9t031_s_ctrl,
+};
+
static struct v4l2_subdev_core_ops mt9t031_subdev_core_ops = {
- .g_ctrl = mt9t031_g_ctrl,
- .s_ctrl = mt9t031_s_ctrl,
.g_chip_ident = mt9t031_g_chip_ident,
+ .s_power = mt9t031_s_power,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = mt9t031_g_register,
.s_register = mt9t031_s_register,
@@ -807,6 +698,34 @@
return 0;
}
+static int mt9t031_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
+static int mt9t031_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ if (soc_camera_apply_board_flags(icl, cfg) &
+ V4L2_MBUS_PCLK_SAMPLE_FALLING)
+ return reg_clear(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
+ else
+ return reg_set(client, MT9T031_PIXEL_CLOCK_CONTROL, 0x8000);
+}
+
static struct v4l2_subdev_video_ops mt9t031_subdev_video_ops = {
.s_stream = mt9t031_s_stream,
.s_mbus_fmt = mt9t031_s_fmt,
@@ -816,6 +735,8 @@
.g_crop = mt9t031_g_crop,
.cropcap = mt9t031_cropcap,
.enum_mbus_fmt = mt9t031_enum_fmt,
+ .g_mbus_config = mt9t031_g_mbus_config,
+ .s_mbus_config = mt9t031_s_mbus_config,
};
static struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = {
@@ -832,18 +753,13 @@
const struct i2c_device_id *did)
{
struct mt9t031 *mt9t031;
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
int ret;
- if (icd) {
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- if (!icl) {
- dev_err(&client->dev, "MT9T031 driver needs platform data\n");
- return -EINVAL;
- }
-
- icd->ops = &mt9t031_ops;
+ if (!icl) {
+ dev_err(&client->dev, "MT9T031 driver needs platform data\n");
+ return -EINVAL;
}
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
@@ -857,6 +773,33 @@
return -ENOMEM;
v4l2_i2c_subdev_init(&mt9t031->subdev, client, &mt9t031_subdev_ops);
+ v4l2_ctrl_handler_init(&mt9t031->hdl, 5);
+ v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+ V4L2_CID_GAIN, 0, 127, 1, 64);
+
+ /*
+ * Simulated autoexposure. If enabled, we calculate shutter width
+ * ourselves in the driver based on vertical blanking and frame width
+ */
+ mt9t031->autoexposure = v4l2_ctrl_new_std_menu(&mt9t031->hdl,
+ &mt9t031_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+ V4L2_EXPOSURE_AUTO);
+ mt9t031->exposure = v4l2_ctrl_new_std(&mt9t031->hdl, &mt9t031_ctrl_ops,
+ V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+
+ mt9t031->subdev.ctrl_handler = &mt9t031->hdl;
+ if (mt9t031->hdl.error) {
+ int err = mt9t031->hdl.error;
+
+ kfree(mt9t031);
+ return err;
+ }
+ v4l2_ctrl_auto_cluster(2, &mt9t031->autoexposure,
+ V4L2_EXPOSURE_MANUAL, true);
mt9t031->y_skip_top = 0;
mt9t031->rect.left = MT9T031_COLUMN_SKIP;
@@ -864,12 +807,6 @@
mt9t031->rect.width = MT9T031_MAX_WIDTH;
mt9t031->rect.height = MT9T031_MAX_HEIGHT;
- /*
- * Simulated autoexposure. If enabled, we calculate shutter width
- * ourselves in the driver based on vertical blanking and frame width
- */
- mt9t031->autoexposure = 1;
-
mt9t031->xskip = 1;
mt9t031->yskip = 1;
@@ -880,8 +817,7 @@
mt9t031_disable(client);
if (ret) {
- if (icd)
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&mt9t031->hdl);
kfree(mt9t031);
}
@@ -891,10 +827,9 @@
static int mt9t031_remove(struct i2c_client *client)
{
struct mt9t031 *mt9t031 = to_mt9t031(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- if (icd)
- icd->ops = NULL;
+ v4l2_device_unregister_subdev(&mt9t031->subdev);
+ v4l2_ctrl_handler_free(&mt9t031->hdl);
kfree(mt9t031);
return 0;
diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c
index d2e0a50..32114a3 100644
--- a/drivers/media/video/mt9t112.c
+++ b/drivers/media/video/mt9t112.c
@@ -22,11 +22,11 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
#include <media/mt9t112.h>
#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-common.h>
@@ -34,11 +34,7 @@
/* #define EXT_CLOCK 24000000 */
/************************************************************************
-
-
macro
-
-
************************************************************************/
/*
* frame size
@@ -80,17 +76,8 @@
#define VAR8(id, offset) _VAR(id, offset, 0x8000)
/************************************************************************
-
-
struct
-
-
************************************************************************/
-struct mt9t112_frame_size {
- u16 width;
- u16 height;
-};
-
struct mt9t112_format {
enum v4l2_mbus_pixelcode code;
enum v4l2_colorspace colorspace;
@@ -102,21 +89,17 @@
struct v4l2_subdev subdev;
struct mt9t112_camera_info *info;
struct i2c_client *client;
- struct soc_camera_device icd;
- struct mt9t112_frame_size frame;
+ struct v4l2_rect frame;
const struct mt9t112_format *format;
int model;
u32 flags;
/* for flags */
-#define INIT_DONE (1<<0)
+#define INIT_DONE (1 << 0)
+#define PCLK_RISING (1 << 1)
};
/************************************************************************
-
-
supported format
-
-
************************************************************************/
static const struct mt9t112_format mt9t112_cfmts[] = {
@@ -154,11 +137,7 @@
};
/************************************************************************
-
-
general function
-
-
************************************************************************/
static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client)
{
@@ -326,50 +305,47 @@
n = (n >> 8) & 0x003f;
enable = ((6000 > ext) || (54000 < ext)) ? "X" : "";
- dev_info(&client->dev, "EXTCLK : %10u K %s\n", ext, enable);
+ dev_dbg(&client->dev, "EXTCLK : %10u K %s\n", ext, enable);
vco = 2 * m * ext / (n+1);
enable = ((384000 > vco) || (768000 < vco)) ? "X" : "";
- dev_info(&client->dev, "VCO : %10u K %s\n", vco, enable);
+ dev_dbg(&client->dev, "VCO : %10u K %s\n", vco, enable);
clk = vco / (p1+1) / (p2+1);
enable = (96000 < clk) ? "X" : "";
- dev_info(&client->dev, "PIXCLK : %10u K %s\n", clk, enable);
+ dev_dbg(&client->dev, "PIXCLK : %10u K %s\n", clk, enable);
clk = vco / (p3+1);
enable = (768000 < clk) ? "X" : "";
- dev_info(&client->dev, "MIPICLK : %10u K %s\n", clk, enable);
+ dev_dbg(&client->dev, "MIPICLK : %10u K %s\n", clk, enable);
clk = vco / (p6+1);
enable = (96000 < clk) ? "X" : "";
- dev_info(&client->dev, "MCU CLK : %10u K %s\n", clk, enable);
+ dev_dbg(&client->dev, "MCU CLK : %10u K %s\n", clk, enable);
clk = vco / (p5+1);
enable = (54000 < clk) ? "X" : "";
- dev_info(&client->dev, "SOC CLK : %10u K %s\n", clk, enable);
+ dev_dbg(&client->dev, "SOC CLK : %10u K %s\n", clk, enable);
clk = vco / (p4+1);
enable = (70000 < clk) ? "X" : "";
- dev_info(&client->dev, "Sensor CLK : %10u K %s\n", clk, enable);
+ dev_dbg(&client->dev, "Sensor CLK : %10u K %s\n", clk, enable);
clk = vco / (p7+1);
- dev_info(&client->dev, "External sensor : %10u K\n", clk);
+ dev_dbg(&client->dev, "External sensor : %10u K\n", clk);
clk = ext / (n+1);
enable = ((2000 > clk) || (24000 < clk)) ? "X" : "";
- dev_info(&client->dev, "PFD : %10u K %s\n", clk, enable);
+ dev_dbg(&client->dev, "PFD : %10u K %s\n", clk, enable);
return 0;
}
#endif
-static void mt9t112_frame_check(u32 *width, u32 *height)
+static void mt9t112_frame_check(u32 *width, u32 *height, u32 *left, u32 *top)
{
- if (*width > MAX_WIDTH)
- *width = MAX_WIDTH;
-
- if (*height > MAX_HEIGHT)
- *height = MAX_HEIGHT;
+ soc_camera_limit_side(left, width, 0, 0, MAX_WIDTH);
+ soc_camera_limit_side(top, height, 0, 0, MAX_HEIGHT);
}
static int mt9t112_set_a_frame_size(const struct i2c_client *client,
@@ -758,48 +734,7 @@
}
/************************************************************************
-
-
- soc_camera_ops
-
-
-************************************************************************/
-static int mt9t112_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return 0;
-}
-
-static unsigned long mt9t112_query_bus_param(struct soc_camera_device *icd)
-{
- struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
- struct mt9t112_priv *priv = to_mt9t112(client);
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long flags = SOCAM_MASTER | SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_HIGH;
-
- flags |= (priv->info->flags & MT9T112_FLAG_PCLK_RISING_EDGE) ?
- SOCAM_PCLK_SAMPLE_RISING : SOCAM_PCLK_SAMPLE_FALLING;
-
- if (priv->info->flags & MT9T112_FLAG_DATAWIDTH_8)
- flags |= SOCAM_DATAWIDTH_8;
- else
- flags |= SOCAM_DATAWIDTH_10;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static struct soc_camera_ops mt9t112_ops = {
- .set_bus_param = mt9t112_set_bus_param,
- .query_bus_param = mt9t112_query_bus_param,
-};
-
-/************************************************************************
-
-
v4l2_subdev_core_ops
-
-
************************************************************************/
static int mt9t112_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *id)
@@ -850,11 +785,7 @@
/************************************************************************
-
-
v4l2_subdev_video_ops
-
-
************************************************************************/
static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable)
{
@@ -877,8 +808,7 @@
}
if (!(priv->flags & INIT_DONE)) {
- u16 param = (MT9T112_FLAG_PCLK_RISING_EDGE &
- priv->info->flags) ? 0x0001 : 0x0000;
+ u16 param = PCLK_RISING & priv->flags ? 0x0001 : 0x0000;
ECHECKER(ret, mt9t112_init_camera(client));
@@ -910,19 +840,12 @@
return ret;
}
-static int mt9t112_set_params(struct i2c_client *client, u32 width, u32 height,
+static int mt9t112_set_params(struct mt9t112_priv *priv,
+ const struct v4l2_rect *rect,
enum v4l2_mbus_pixelcode code)
{
- struct mt9t112_priv *priv = to_mt9t112(client);
int i;
- priv->format = NULL;
-
- /*
- * frame size check
- */
- mt9t112_frame_check(&width, &height);
-
/*
* get color format
*/
@@ -933,8 +856,13 @@
if (i == ARRAY_SIZE(mt9t112_cfmts))
return -EINVAL;
- priv->frame.width = (u16)width;
- priv->frame.height = (u16)height;
+ priv->frame = *rect;
+
+ /*
+ * frame size check
+ */
+ mt9t112_frame_check(&priv->frame.width, &priv->frame.height,
+ &priv->frame.left, &priv->frame.top);
priv->format = mt9t112_cfmts + i;
@@ -945,9 +873,12 @@
{
a->bounds.left = 0;
a->bounds.top = 0;
- a->bounds.width = VGA_WIDTH;
- a->bounds.height = VGA_HEIGHT;
- a->defrect = a->bounds;
+ a->bounds.width = MAX_WIDTH;
+ a->bounds.height = MAX_HEIGHT;
+ a->defrect.left = 0;
+ a->defrect.top = 0;
+ a->defrect.width = VGA_WIDTH;
+ a->defrect.height = VGA_HEIGHT;
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->pixelaspect.numerator = 1;
a->pixelaspect.denominator = 1;
@@ -957,11 +888,11 @@
static int mt9t112_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
{
- a->c.left = 0;
- a->c.top = 0;
- a->c.width = VGA_WIDTH;
- a->c.height = VGA_HEIGHT;
- a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct mt9t112_priv *priv = to_mt9t112(client);
+
+ a->c = priv->frame;
+ a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
return 0;
}
@@ -969,10 +900,10 @@
static int mt9t112_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct mt9t112_priv *priv = to_mt9t112(client);
struct v4l2_rect *rect = &a->c;
- return mt9t112_set_params(client, rect->width, rect->height,
- V4L2_MBUS_FMT_UYVY8_2X8);
+ return mt9t112_set_params(priv, rect, priv->format->code);
}
static int mt9t112_g_fmt(struct v4l2_subdev *sd,
@@ -981,16 +912,9 @@
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct mt9t112_priv *priv = to_mt9t112(client);
- if (!priv->format) {
- int ret = mt9t112_set_params(client, VGA_WIDTH, VGA_HEIGHT,
- V4L2_MBUS_FMT_UYVY8_2X8);
- if (ret < 0)
- return ret;
- }
-
mf->width = priv->frame.width;
mf->height = priv->frame.height;
- /* TODO: set colorspace */
+ mf->colorspace = priv->format->colorspace;
mf->code = priv->format->code;
mf->field = V4L2_FIELD_NONE;
@@ -1001,17 +925,42 @@
struct v4l2_mbus_framefmt *mf)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct mt9t112_priv *priv = to_mt9t112(client);
+ struct v4l2_rect rect = {
+ .width = mf->width,
+ .height = mf->height,
+ .left = priv->frame.left,
+ .top = priv->frame.top,
+ };
+ int ret;
- /* TODO: set colorspace */
- return mt9t112_set_params(client, mf->width, mf->height, mf->code);
+ ret = mt9t112_set_params(priv, &rect, mf->code);
+
+ if (!ret)
+ mf->colorspace = priv->format->colorspace;
+
+ return ret;
}
static int mt9t112_try_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf)
{
- mt9t112_frame_check(&mf->width, &mf->height);
+ unsigned int top, left;
+ int i;
- /* TODO: set colorspace */
+ for (i = 0; i < ARRAY_SIZE(mt9t112_cfmts); i++)
+ if (mt9t112_cfmts[i].code == mf->code)
+ break;
+
+ if (i == ARRAY_SIZE(mt9t112_cfmts)) {
+ mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+ mf->colorspace = V4L2_COLORSPACE_JPEG;
+ } else {
+ mf->colorspace = mt9t112_cfmts[i].colorspace;
+ }
+
+ mt9t112_frame_check(&mf->width, &mf->height, &left, &top);
+
mf->field = V4L2_FIELD_NONE;
return 0;
@@ -1024,6 +973,35 @@
return -EINVAL;
*code = mt9t112_cfmts[index].code;
+
+ return 0;
+}
+
+static int mt9t112_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_HIGH |
+ V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
+static int mt9t112_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ struct mt9t112_priv *priv = to_mt9t112(client);
+
+ if (soc_camera_apply_board_flags(icl, cfg) & V4L2_MBUS_PCLK_SAMPLE_RISING)
+ priv->flags |= PCLK_RISING;
+
return 0;
}
@@ -1036,31 +1014,24 @@
.g_crop = mt9t112_g_crop,
.s_crop = mt9t112_s_crop,
.enum_mbus_fmt = mt9t112_enum_fmt,
+ .g_mbus_config = mt9t112_g_mbus_config,
+ .s_mbus_config = mt9t112_s_mbus_config,
};
/************************************************************************
-
-
i2c driver
-
-
************************************************************************/
static struct v4l2_subdev_ops mt9t112_subdev_ops = {
.core = &mt9t112_subdev_core_ops,
.video = &mt9t112_subdev_video_ops,
};
-static int mt9t112_camera_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int mt9t112_camera_probe(struct i2c_client *client)
{
struct mt9t112_priv *priv = to_mt9t112(client);
const char *devname;
int chipid;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/*
* check and show chip ID
*/
@@ -1088,20 +1059,21 @@
static int mt9t112_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
- struct mt9t112_priv *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl;
- int ret;
+ struct mt9t112_priv *priv;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ struct v4l2_rect rect = {
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
+ .left = (MAX_WIDTH - VGA_WIDTH) / 2,
+ .top = (MAX_HEIGHT - VGA_HEIGHT) / 2,
+ };
+ int ret;
- if (!icd) {
- dev_err(&client->dev, "mt9t112: missing soc-camera data!\n");
+ if (!icl || !icl->priv) {
+ dev_err(&client->dev, "mt9t112: missing platform data!\n");
return -EINVAL;
}
- icl = to_soc_camera_link(icd);
- if (!icl || !icl->priv)
- return -EINVAL;
-
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
@@ -1110,13 +1082,12 @@
v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops);
- icd->ops = &mt9t112_ops;
-
- ret = mt9t112_camera_probe(icd, client);
- if (ret) {
- icd->ops = NULL;
+ ret = mt9t112_camera_probe(client);
+ if (ret)
kfree(priv);
- }
+
+ /* Cannot fail: using the default supported pixel code */
+ mt9t112_set_params(priv, &rect, V4L2_MBUS_FMT_UYVY8_2X8);
return ret;
}
@@ -1124,9 +1095,7 @@
static int mt9t112_remove(struct i2c_client *client)
{
struct mt9t112_priv *priv = to_mt9t112(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- icd->ops = NULL;
kfree(priv);
return 0;
}
@@ -1147,11 +1116,7 @@
};
/************************************************************************
-
-
module function
-
-
************************************************************************/
static int __init mt9t112_module_init(void)
{
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index 51b0fcc..b6a29f7 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -14,9 +14,11 @@
#include <linux/delay.h>
#include <linux/log2.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-chip-ident.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
/*
* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
@@ -100,6 +102,17 @@
struct mt9v022 {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* exposure/auto-exposure cluster */
+ struct v4l2_ctrl *autoexposure;
+ struct v4l2_ctrl *exposure;
+ };
+ struct {
+ /* gain/auto-gain cluster */
+ struct v4l2_ctrl *autogain;
+ struct v4l2_ctrl *gain;
+ };
struct v4l2_rect rect; /* Sensor window */
const struct mt9v022_datafmt *fmt;
const struct mt9v022_datafmt *fmts;
@@ -178,6 +191,8 @@
ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
if (!ret)
ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0);
+ if (!ret)
+ return v4l2_ctrl_handler_setup(&mt9v022->hdl);
return ret;
}
@@ -199,78 +214,6 @@
return 0;
}
-static int mt9v022_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
- struct mt9v022 *mt9v022 = to_mt9v022(client);
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
- int ret;
- u16 pixclk = 0;
-
- /* Only one width bit may be set */
- if (!is_power_of_2(width_flag))
- return -EINVAL;
-
- if (icl->set_bus_param) {
- ret = icl->set_bus_param(icl, width_flag);
- if (ret)
- return ret;
- } else {
- /*
- * Without board specific bus width settings we only support the
- * sensors native bus width
- */
- if (width_flag != SOCAM_DATAWIDTH_10)
- return -EINVAL;
- }
-
- flags = soc_camera_apply_sensor_flags(icl, flags);
-
- if (flags & SOCAM_PCLK_SAMPLE_FALLING)
- pixclk |= 0x10;
-
- if (!(flags & SOCAM_HSYNC_ACTIVE_HIGH))
- pixclk |= 0x1;
-
- if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH))
- pixclk |= 0x2;
-
- ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
- if (ret < 0)
- return ret;
-
- if (!(flags & SOCAM_MASTER))
- mt9v022->chip_control &= ~0x8;
-
- ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
- if (ret < 0)
- return ret;
-
- dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
- pixclk, mt9v022->chip_control);
-
- return 0;
-}
-
-static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned int flags = SOCAM_MASTER | SOCAM_SLAVE |
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH;
-
- if (icl->query_bus_param)
- flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
- else
- flags |= SOCAM_DATAWIDTH_10;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -389,7 +332,7 @@
/*
* The caller provides a supported format, as verified per call to
- * icd->try_fmt(), datawidth is from our supported format list
+ * .try_mbus_fmt(), datawidth is from our supported format list
*/
switch (mf->code) {
case V4L2_MBUS_FMT_Y8_1X8:
@@ -502,236 +445,131 @@
}
#endif
-static const struct v4l2_queryctrl mt9v022_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Analog Gain",
- .minimum = 64,
- .maximum = 127,
- .step = 1,
- .default_value = 64,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Exposure",
- .minimum = 1,
- .maximum = 255,
- .step = 1,
- .default_value = 255,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_AUTOGAIN,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Automatic Gain",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- }, {
- .id = V4L2_CID_EXPOSURE_AUTO,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Automatic Exposure",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- }
-};
-
-static struct soc_camera_ops mt9v022_ops = {
- .set_bus_param = mt9v022_set_bus_param,
- .query_bus_param = mt9v022_query_bus_param,
- .controls = mt9v022_controls,
- .num_controls = ARRAY_SIZE(mt9v022_controls),
-};
-
-static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+ struct mt9v022, hdl);
+ struct v4l2_subdev *sd = &mt9v022->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- const struct v4l2_queryctrl *qctrl;
+ struct v4l2_ctrl *gain = mt9v022->gain;
+ struct v4l2_ctrl *exp = mt9v022->exposure;
unsigned long range;
int data;
- qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
-
switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- data = reg_read(client, MT9V022_READ_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x10);
- break;
- case V4L2_CID_HFLIP:
- data = reg_read(client, MT9V022_READ_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x20);
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x1);
- break;
case V4L2_CID_AUTOGAIN:
- data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
- if (data < 0)
- return -EIO;
- ctrl->value = !!(data & 0x2);
- break;
- case V4L2_CID_GAIN:
data = reg_read(client, MT9V022_ANALOG_GAIN);
if (data < 0)
return -EIO;
- range = qctrl->maximum - qctrl->minimum;
- ctrl->value = ((data - 16) * range + 24) / 48 + qctrl->minimum;
-
- break;
- case V4L2_CID_EXPOSURE:
+ range = gain->maximum - gain->minimum;
+ gain->val = ((data - 16) * range + 24) / 48 + gain->minimum;
+ return 0;
+ case V4L2_CID_EXPOSURE_AUTO:
data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH);
if (data < 0)
return -EIO;
- range = qctrl->maximum - qctrl->minimum;
- ctrl->value = ((data - 1) * range + 239) / 479 + qctrl->minimum;
-
- break;
+ range = exp->maximum - exp->minimum;
+ exp->val = ((data - 1) * range + 239) / 479 + exp->minimum;
+ return 0;
}
- return 0;
+ return -EINVAL;
}
-static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_s_ctrl(struct v4l2_ctrl *ctrl)
{
- int data;
+ struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+ struct mt9v022, hdl);
+ struct v4l2_subdev *sd = &mt9v022->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- const struct v4l2_queryctrl *qctrl;
-
- qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
- if (!qctrl)
- return -EINVAL;
+ int data;
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, MT9V022_READ_MODE, 0x10);
else
data = reg_clear(client, MT9V022_READ_MODE, 0x10);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_HFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, MT9V022_READ_MODE, 0x20);
else
data = reg_clear(client, MT9V022_READ_MODE, 0x20);
if (data < 0)
return -EIO;
- break;
- case V4L2_CID_GAIN:
- /* mt9v022 has minimum == default */
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
- else {
- unsigned long range = qctrl->maximum - qctrl->minimum;
+ return 0;
+ case V4L2_CID_AUTOGAIN:
+ if (ctrl->val) {
+ if (reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
+ return -EIO;
+ } else {
+ struct v4l2_ctrl *gain = mt9v022->gain;
+ /* mt9v022 has minimum == default */
+ unsigned long range = gain->maximum - gain->minimum;
/* Valid values 16 to 64, 32 to 64 must be even. */
- unsigned long gain = ((ctrl->value - qctrl->minimum) *
+ unsigned long gain_val = ((gain->val - gain->minimum) *
48 + range / 2) / range + 16;
- if (gain >= 32)
- gain &= ~1;
+
+ if (gain_val >= 32)
+ gain_val &= ~1;
+
/*
* The user wants to set gain manually, hope, she
* knows, what she's doing... Switch AGC off.
*/
-
if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
return -EIO;
dev_dbg(&client->dev, "Setting gain from %d to %lu\n",
- reg_read(client, MT9V022_ANALOG_GAIN), gain);
- if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0)
+ reg_read(client, MT9V022_ANALOG_GAIN), gain_val);
+ if (reg_write(client, MT9V022_ANALOG_GAIN, gain_val) < 0)
return -EIO;
}
- break;
- case V4L2_CID_EXPOSURE:
- /* mt9v022 has maximum == default */
- if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
- return -EINVAL;
- else {
- unsigned long range = qctrl->maximum - qctrl->minimum;
- unsigned long shutter = ((ctrl->value - qctrl->minimum) *
- 479 + range / 2) / range + 1;
+ return 0;
+ case V4L2_CID_EXPOSURE_AUTO:
+ if (ctrl->val == V4L2_EXPOSURE_AUTO) {
+ data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+ } else {
+ struct v4l2_ctrl *exp = mt9v022->exposure;
+ unsigned long range = exp->maximum - exp->minimum;
+ unsigned long shutter = ((exp->val - exp->minimum) *
+ 479 + range / 2) / range + 1;
+
/*
* The user wants to set shutter width manually, hope,
* she knows, what she's doing... Switch AEC off.
*/
-
- if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
+ data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+ if (data < 0)
return -EIO;
-
dev_dbg(&client->dev, "Shutter width from %d to %lu\n",
- reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
- shutter);
+ reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
+ shutter);
if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
- shutter) < 0)
+ shutter) < 0)
return -EIO;
}
- break;
- case V4L2_CID_AUTOGAIN:
- if (ctrl->value)
- data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2);
- else
- data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2);
- if (data < 0)
- return -EIO;
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- if (ctrl->value)
- data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
- else
- data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
- if (data < 0)
- return -EIO;
- break;
+ return 0;
}
- return 0;
+ return -EINVAL;
}
/*
* Interface active, can use i2c. If it fails, it can indeed mean, that
* this wasn't our capture interface, so, we wait for the right one
*/
-static int mt9v022_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int mt9v022_video_probe(struct i2c_client *client)
{
struct mt9v022 *mt9v022 = to_mt9v022(client);
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
s32 data;
int ret;
unsigned long flags;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/* Read out the chip version register */
data = reg_read(client, MT9V022_CHIP_VERSION);
@@ -805,16 +643,6 @@
return ret;
}
-static void mt9v022_video_remove(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- dev_dbg(icd->pdev, "Video removed: %p, %p\n",
- icd->parent, icd->vdev);
- if (icl->free_bus)
- icl->free_bus(icl);
-}
-
static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -825,9 +653,12 @@
return 0;
}
+static const struct v4l2_ctrl_ops mt9v022_ctrl_ops = {
+ .g_volatile_ctrl = mt9v022_g_volatile_ctrl,
+ .s_ctrl = mt9v022_s_ctrl,
+};
+
static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
- .g_ctrl = mt9v022_g_ctrl,
- .s_ctrl = mt9v022_s_ctrl,
.g_chip_ident = mt9v022_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = mt9v022_g_register,
@@ -848,6 +679,72 @@
return 0;
}
+static int mt9v022_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE |
+ V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
+static int mt9v022_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ struct mt9v022 *mt9v022 = to_mt9v022(client);
+ unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+ unsigned int bps = soc_mbus_get_fmtdesc(mt9v022->fmt->code)->bits_per_sample;
+ int ret;
+ u16 pixclk = 0;
+
+ if (icl->set_bus_param) {
+ ret = icl->set_bus_param(icl, 1 << (bps - 1));
+ if (ret)
+ return ret;
+ } else if (bps != 10) {
+ /*
+ * Without board specific bus width settings we only support the
+ * sensors native bus width
+ */
+ return -EINVAL;
+ }
+
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+ pixclk |= 0x10;
+
+ if (!(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH))
+ pixclk |= 0x1;
+
+ if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH))
+ pixclk |= 0x2;
+
+ ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
+ if (ret < 0)
+ return ret;
+
+ if (!(flags & V4L2_MBUS_MASTER))
+ mt9v022->chip_control &= ~0x8;
+
+ ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
+ pixclk, mt9v022->chip_control);
+
+ return 0;
+}
+
static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
.s_stream = mt9v022_s_stream,
.s_mbus_fmt = mt9v022_s_fmt,
@@ -857,6 +754,8 @@
.g_crop = mt9v022_g_crop,
.cropcap = mt9v022_cropcap,
.enum_mbus_fmt = mt9v022_enum_fmt,
+ .g_mbus_config = mt9v022_g_mbus_config,
+ .s_mbus_config = mt9v022_s_mbus_config,
};
static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = {
@@ -873,17 +772,10 @@
const struct i2c_device_id *did)
{
struct mt9v022 *mt9v022;
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
int ret;
- if (!icd) {
- dev_err(&client->dev, "MT9V022: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "MT9V022 driver needs platform data\n");
return -EINVAL;
@@ -900,10 +792,39 @@
return -ENOMEM;
v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops);
+ v4l2_ctrl_handler_init(&mt9v022->hdl, 6);
+ v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ mt9v022->autogain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ mt9v022->gain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_GAIN, 0, 127, 1, 64);
+
+ /*
+ * Simulated autoexposure. If enabled, we calculate shutter width
+ * ourselves in the driver based on vertical blanking and frame width
+ */
+ mt9v022->autoexposure = v4l2_ctrl_new_std_menu(&mt9v022->hdl,
+ &mt9v022_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+ V4L2_EXPOSURE_AUTO);
+ mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+ V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+
+ mt9v022->subdev.ctrl_handler = &mt9v022->hdl;
+ if (mt9v022->hdl.error) {
+ int err = mt9v022->hdl.error;
+
+ kfree(mt9v022);
+ return err;
+ }
+ v4l2_ctrl_auto_cluster(2, &mt9v022->autoexposure,
+ V4L2_EXPOSURE_MANUAL, true);
+ v4l2_ctrl_auto_cluster(2, &mt9v022->autogain, 0, true);
mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
- icd->ops = &mt9v022_ops;
/*
* MT9V022 _really_ corrupts the first read out line.
* TODO: verify on i.MX31
@@ -914,9 +835,9 @@
mt9v022->rect.width = MT9V022_MAX_WIDTH;
mt9v022->rect.height = MT9V022_MAX_HEIGHT;
- ret = mt9v022_video_probe(icd, client);
+ ret = mt9v022_video_probe(client);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&mt9v022->hdl);
kfree(mt9v022);
}
@@ -926,10 +847,12 @@
static int mt9v022_remove(struct i2c_client *client)
{
struct mt9v022 *mt9v022 = to_mt9v022(client);
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
- icd->ops = NULL;
- mt9v022_video_remove(icd);
+ v4l2_device_unregister_subdev(&mt9v022->subdev);
+ if (icl->free_bus)
+ icl->free_bus(icl);
+ v4l2_ctrl_handler_free(&mt9v022->hdl);
kfree(mt9v022);
return 0;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 087db12..18e94c7 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -78,11 +78,10 @@
#define CSI_IRQ_MASK (CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT)
-#define CSI_BUS_FLAGS (SOCAM_MASTER | SOCAM_HSYNC_ACTIVE_HIGH | \
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | \
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW | \
- SOCAM_DATAWIDTH_8)
+#define CSI_BUS_FLAGS (V4L2_MBUS_MASTER | V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW | \
+ V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+ V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_DATA_ACTIVE_LOW)
#define MAX_VIDEO_MEM 16 /* Video memory limit in megabytes */
@@ -490,59 +489,73 @@
static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx1_camera_dev *pcdev = ici->priv;
- unsigned long camera_flags, common_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long common_flags;
unsigned int csicr1;
int ret;
- camera_flags = icd->ops->query_bus_param(icd);
-
/* MX1 supports only 8bit buswidth */
- common_flags = soc_camera_bus_param_compatible(camera_flags,
- CSI_BUS_FLAGS);
- if (!common_flags)
- return -EINVAL;
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg, CSI_BUS_FLAGS);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%x\n",
+ cfg.flags, CSI_BUS_FLAGS);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ } else {
+ common_flags = CSI_BUS_FLAGS;
+ }
/* Make choises, based on platform choice */
- if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
if (!pcdev->pdata ||
pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH)
- common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
else
- common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
}
- if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
- (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+ if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+ (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
if (!pcdev->pdata ||
pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING)
- common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
else
- common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
}
- if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
- (common_flags & SOCAM_DATA_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
if (!pcdev->pdata ||
pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH)
- common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
else
- common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
}
- ret = icd->ops->set_bus_param(icd, common_flags);
- if (ret < 0)
+ cfg.flags = common_flags;
+ ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
+ common_flags, ret);
return ret;
+ }
csicr1 = __raw_readl(pcdev->base + CSICR1);
- if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
+ if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
- if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
+ if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
- if (common_flags & SOCAM_DATA_ACTIVE_LOW)
+ if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
csicr1 |= CSICR1_DATA_POL;
__raw_writel(csicr1, pcdev->base + CSICR1);
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index ec2410c..a803d9e 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -686,16 +686,15 @@
icd, &icd->video_lock);
}
-#define MX2_BUS_FLAGS (SOCAM_DATAWIDTH_8 | \
- SOCAM_MASTER | \
- SOCAM_VSYNC_ACTIVE_HIGH | \
- SOCAM_VSYNC_ACTIVE_LOW | \
- SOCAM_HSYNC_ACTIVE_HIGH | \
- SOCAM_HSYNC_ACTIVE_LOW | \
- SOCAM_PCLK_SAMPLE_RISING | \
- SOCAM_PCLK_SAMPLE_FALLING | \
- SOCAM_DATA_ACTIVE_HIGH | \
- SOCAM_DATA_ACTIVE_LOW)
+#define MX2_BUS_FLAGS (V4L2_MBUS_MASTER | \
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_VSYNC_ACTIVE_LOW | \
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_HSYNC_ACTIVE_LOW | \
+ V4L2_MBUS_PCLK_SAMPLE_RISING | \
+ V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+ V4L2_MBUS_DATA_ACTIVE_HIGH | \
+ V4L2_MBUS_DATA_ACTIVE_LOW)
static int mx27_camera_emma_prp_reset(struct mx2_camera_dev *pcdev)
{
@@ -770,46 +769,59 @@
static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
__u32 pixfmt)
{
- struct soc_camera_host *ici =
- to_soc_camera_host(icd->parent);
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx2_camera_dev *pcdev = ici->priv;
- unsigned long camera_flags, common_flags;
- int ret = 0;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long common_flags;
+ int ret;
int bytesperline;
u32 csicr1 = pcdev->csicr1;
- camera_flags = icd->ops->query_bus_param(icd);
-
- common_flags = soc_camera_bus_param_compatible(camera_flags,
- MX2_BUS_FLAGS);
- if (!common_flags)
- return -EINVAL;
-
- if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
- if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
- common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
- else
- common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
- }
-
- if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
- (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
- if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
- common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
- else
- common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
- }
-
- ret = icd->ops->set_bus_param(icd, common_flags);
- if (ret < 0)
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg, MX2_BUS_FLAGS);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%x\n",
+ cfg.flags, MX2_BUS_FLAGS);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
return ret;
+ } else {
+ common_flags = MX2_BUS_FLAGS;
+ }
- if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
+ if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
+ if (pcdev->platform_flags & MX2_CAMERA_HSYNC_HIGH)
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
+ else
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
+ }
+
+ if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+ (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
+ if (pcdev->platform_flags & MX2_CAMERA_PCLK_SAMPLE_RISING)
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
+ else
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
+ }
+
+ cfg.flags = common_flags;
+ ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
+ common_flags, ret);
+ return ret;
+ }
+
+ if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
- if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
+ if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
- if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
+ if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_HSYNC_POL;
if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
csicr1 |= CSICR1_SWAP16_EN;
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index c8e958a..f96f92f 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -109,10 +109,12 @@
unsigned long platform_flags;
unsigned long mclk;
+ u16 width_flags; /* max 15 bits */
struct list_head capture;
spinlock_t lock; /* Protects video buffer lists */
struct mx3_camera_buffer *active;
+ size_t buf_total;
struct vb2_alloc_ctx *alloc_ctx;
enum v4l2_field field;
int sequence;
@@ -190,79 +192,53 @@
* Calculate the __buffer__ (not data) size and number of buffers.
*/
static int mx3_videobuf_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt,
unsigned int *count, unsigned int *num_planes,
unsigned int sizes[], void *alloc_ctxs[])
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
-
- if (bytes_per_line < 0)
- return bytes_per_line;
+ int bytes_per_line;
+ unsigned int height;
if (!mx3_cam->idmac_channel[0])
return -EINVAL;
- *num_planes = 1;
-
- mx3_cam->sequence = 0;
- sizes[0] = bytes_per_line * icd->user_height;
- alloc_ctxs[0] = mx3_cam->alloc_ctx;
-
- if (!*count)
- *count = 32;
-
- if (sizes[0] * *count > MAX_VIDEO_MEM * 1024 * 1024)
- *count = MAX_VIDEO_MEM * 1024 * 1024 / sizes[0];
-
- return 0;
-}
-
-static int mx3_videobuf_prepare(struct vb2_buffer *vb)
-{
- struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct mx3_camera_dev *mx3_cam = ici->priv;
- struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
- struct scatterlist *sg;
- struct mx3_camera_buffer *buf;
- size_t new_size;
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ if (fmt) {
+ const struct soc_camera_format_xlate *xlate = soc_camera_xlate_by_fourcc(icd,
+ fmt->fmt.pix.pixelformat);
+ if (!xlate)
+ return -EINVAL;
+ bytes_per_line = soc_mbus_bytes_per_line(fmt->fmt.pix.width,
+ xlate->host_fmt);
+ height = fmt->fmt.pix.height;
+ } else {
+ /* Called from VIDIOC_REQBUFS or in compatibility mode */
+ bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
icd->current_fmt->host_fmt);
-
+ height = icd->user_height;
+ }
if (bytes_per_line < 0)
return bytes_per_line;
- buf = to_mx3_vb(vb);
- sg = &buf->sg;
+ sizes[0] = bytes_per_line * height;
- new_size = bytes_per_line * icd->user_height;
+ alloc_ctxs[0] = mx3_cam->alloc_ctx;
- if (vb2_plane_size(vb, 0) < new_size) {
- dev_err(icd->parent, "Buffer too small (%lu < %zu)\n",
- vb2_plane_size(vb, 0), new_size);
- return -ENOBUFS;
- }
+ if (!vq->num_buffers)
+ mx3_cam->sequence = 0;
- if (buf->state == CSI_BUF_NEEDS_INIT) {
- sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0);
- sg_dma_len(sg) = new_size;
+ if (!*count)
+ *count = 2;
- buf->txd = ichan->dma_chan.device->device_prep_slave_sg(
- &ichan->dma_chan, sg, 1, DMA_FROM_DEVICE,
- DMA_PREP_INTERRUPT);
- if (!buf->txd)
- return -EIO;
+ /* If *num_planes != 0, we have already verified *count. */
+ if (!*num_planes &&
+ sizes[0] * *count + mx3_cam->buf_total > MAX_VIDEO_MEM * 1024 * 1024)
+ *count = (MAX_VIDEO_MEM * 1024 * 1024 - mx3_cam->buf_total) /
+ sizes[0];
- buf->txd->callback_param = buf->txd;
- buf->txd->callback = mx3_cam_dma_done;
-
- buf->state = CSI_BUF_PREPARED;
- }
-
- vb2_set_plane_payload(vb, 0, new_size);
+ *num_planes = 1;
return 0;
}
@@ -286,28 +262,58 @@
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
struct mx3_camera_buffer *buf = to_mx3_vb(vb);
- struct dma_async_tx_descriptor *txd = buf->txd;
- struct idmac_channel *ichan = to_idmac_chan(txd->chan);
+ struct scatterlist *sg = &buf->sg;
+ struct dma_async_tx_descriptor *txd;
+ struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
struct idmac_video_param *video = &ichan->params.video;
- dma_cookie_t cookie;
- u32 fourcc = icd->current_fmt->host_fmt->fourcc;
+ const struct soc_mbus_pixelfmt *host_fmt = icd->current_fmt->host_fmt;
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, host_fmt);
unsigned long flags;
+ dma_cookie_t cookie;
+ size_t new_size;
+
+ BUG_ON(bytes_per_line <= 0);
+
+ new_size = bytes_per_line * icd->user_height;
+
+ if (vb2_plane_size(vb, 0) < new_size) {
+ dev_err(icd->parent, "Buffer #%d too small (%lu < %zu)\n",
+ vb->v4l2_buf.index, vb2_plane_size(vb, 0), new_size);
+ goto error;
+ }
+
+ if (buf->state == CSI_BUF_NEEDS_INIT) {
+ sg_dma_address(sg) = vb2_dma_contig_plane_dma_addr(vb, 0);
+ sg_dma_len(sg) = new_size;
+
+ txd = ichan->dma_chan.device->device_prep_slave_sg(
+ &ichan->dma_chan, sg, 1, DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT);
+ if (!txd)
+ goto error;
+
+ txd->callback_param = txd;
+ txd->callback = mx3_cam_dma_done;
+
+ buf->state = CSI_BUF_PREPARED;
+ buf->txd = txd;
+ } else {
+ txd = buf->txd;
+ }
+
+ vb2_set_plane_payload(vb, 0, new_size);
/* This is the configuration of one sg-element */
- video->out_pixel_fmt = fourcc_to_ipu_pix(fourcc);
+ video->out_pixel_fmt = fourcc_to_ipu_pix(host_fmt->fourcc);
if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
/*
- * If the IPU DMA channel is configured to transport
- * generic 8-bit data, we have to set up correctly the
- * geometry parameters upon the current pixel format.
- * So, since the DMA horizontal parameters are expressed
- * in bytes not pixels, convert these in the right unit.
+ * If the IPU DMA channel is configured to transfer generic
+ * 8-bit data, we have to set up the geometry parameters
+ * correctly, according to the current pixel format. The DMA
+ * horizontal parameters in this case are expressed in bytes,
+ * not in pixels.
*/
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
- BUG_ON(bytes_per_line <= 0);
-
video->out_width = bytes_per_line;
video->out_height = icd->user_height;
video->out_stride = bytes_per_line;
@@ -351,6 +357,7 @@
mx3_cam->active = NULL;
spin_unlock_irqrestore(&mx3_cam->lock, flags);
+error:
vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
}
@@ -384,17 +391,24 @@
}
spin_unlock_irqrestore(&mx3_cam->lock, flags);
+
+ mx3_cam->buf_total -= vb2_plane_size(vb, 0);
}
static int mx3_videobuf_init(struct vb2_buffer *vb)
{
+ struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+ struct mx3_camera_dev *mx3_cam = ici->priv;
struct mx3_camera_buffer *buf = to_mx3_vb(vb);
+
/* This is for locking debugging only */
INIT_LIST_HEAD(&buf->queue);
sg_init_table(&buf->sg, 1);
buf->state = CSI_BUF_NEEDS_INIT;
- buf->txd = NULL;
+
+ mx3_cam->buf_total += vb2_plane_size(vb, 0);
return 0;
}
@@ -405,13 +419,12 @@
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
struct idmac_channel *ichan = mx3_cam->idmac_channel[0];
- struct dma_chan *chan;
struct mx3_camera_buffer *buf, *tmp;
unsigned long flags;
if (ichan) {
- chan = &ichan->dma_chan;
- chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+ struct dma_chan *chan = &ichan->dma_chan;
+ chan->device->device_control(chan, DMA_PAUSE, 0);
}
spin_lock_irqsave(&mx3_cam->lock, flags);
@@ -419,8 +432,8 @@
mx3_cam->active = NULL;
list_for_each_entry_safe(buf, tmp, &mx3_cam->capture, queue) {
- buf->state = CSI_BUF_NEEDS_INIT;
list_del_init(&buf->queue);
+ vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
}
spin_unlock_irqrestore(&mx3_cam->lock, flags);
@@ -430,7 +443,6 @@
static struct vb2_ops mx3_videobuf_ops = {
.queue_setup = mx3_videobuf_setup,
- .buf_prepare = mx3_videobuf_prepare,
.buf_queue = mx3_videobuf_queue,
.buf_cleanup = mx3_videobuf_release,
.buf_init = mx3_videobuf_init,
@@ -514,6 +526,7 @@
mx3_camera_activate(mx3_cam, icd);
+ mx3_cam->buf_total = 0;
mx3_cam->icd = icd;
dev_info(icd->parent, "MX3 Camera driver attached to camera %d\n",
@@ -548,58 +561,27 @@
unsigned char buswidth, unsigned long *flags)
{
/*
+ * If requested data width is supported by the platform, use it or any
+ * possible lower value - i.MX31 is smart enough to shift bits
+ */
+ if (buswidth > fls(mx3_cam->width_flags))
+ return -EINVAL;
+
+ /*
* Platform specified synchronization and pixel clock polarities are
* only a recommendation and are only used during probing. MX3x
* camera interface only works in master mode, i.e., uses HSYNC and
* VSYNC signals from the sensor
*/
- *flags = SOCAM_MASTER |
- SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_PCLK_SAMPLE_RISING |
- SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_DATA_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_LOW;
-
- /*
- * If requested data width is supported by the platform, use it or any
- * possible lower value - i.MX31 is smart enough to schift bits
- */
- if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
- *flags |= SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_10 |
- SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
- else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
- *flags |= SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8 |
- SOCAM_DATAWIDTH_4;
- else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
- *flags |= SOCAM_DATAWIDTH_8 | SOCAM_DATAWIDTH_4;
- else if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
- *flags |= SOCAM_DATAWIDTH_4;
-
- switch (buswidth) {
- case 15:
- if (!(*flags & SOCAM_DATAWIDTH_15))
- return -EINVAL;
- break;
- case 10:
- if (!(*flags & SOCAM_DATAWIDTH_10))
- return -EINVAL;
- break;
- case 8:
- if (!(*flags & SOCAM_DATAWIDTH_8))
- return -EINVAL;
- break;
- case 4:
- if (!(*flags & SOCAM_DATAWIDTH_4))
- return -EINVAL;
- break;
- default:
- dev_warn(mx3_cam->soc_host.v4l2_dev.dev,
- "Unsupported bus width %d\n", buswidth);
- return -EINVAL;
- }
+ *flags = V4L2_MBUS_MASTER |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_HSYNC_ACTIVE_LOW |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW |
+ V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_DATA_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_LOW;
return 0;
}
@@ -607,9 +589,11 @@
static int mx3_camera_try_bus_param(struct soc_camera_device *icd,
const unsigned int depth)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
- unsigned long bus_flags, camera_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long bus_flags, common_flags;
int ret = test_platform_param(mx3_cam, depth, &bus_flags);
dev_dbg(icd->parent, "request bus width %d bit: %d\n", depth, ret);
@@ -617,15 +601,21 @@
if (ret < 0)
return ret;
- camera_flags = icd->ops->query_bus_param(icd);
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg,
+ bus_flags);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%lx\n",
+ cfg.flags, bus_flags);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ }
- ret = soc_camera_bus_param_compatible(camera_flags, bus_flags);
- if (ret < 0)
- dev_warn(icd->parent,
- "Flags incompatible: camera %lx, host %lx\n",
- camera_flags, bus_flags);
-
- return ret;
+ return 0;
}
static bool chan_filter(struct dma_chan *chan, void *arg)
@@ -994,9 +984,11 @@
static int mx3_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
- unsigned long bus_flags, camera_flags, common_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long bus_flags, common_flags;
u32 dw, sens_conf;
const struct soc_mbus_pixelfmt *fmt;
int buswidth;
@@ -1008,83 +1000,76 @@
if (!fmt)
return -EINVAL;
- buswidth = fmt->bits_per_sample;
- ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
-
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (!xlate) {
dev_warn(dev, "Format %x not found\n", pixfmt);
return -EINVAL;
}
+ buswidth = fmt->bits_per_sample;
+ ret = test_platform_param(mx3_cam, buswidth, &bus_flags);
+
dev_dbg(dev, "requested bus width %d bit: %d\n", buswidth, ret);
if (ret < 0)
return ret;
- camera_flags = icd->ops->query_bus_param(icd);
-
- common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
- dev_dbg(dev, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n",
- camera_flags, bus_flags, common_flags);
- if (!common_flags) {
- dev_dbg(dev, "no common flags");
- return -EINVAL;
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg,
+ bus_flags);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%lx\n",
+ cfg.flags, bus_flags);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ } else {
+ common_flags = bus_flags;
}
+ dev_dbg(dev, "Flags cam: 0x%x host: 0x%lx common: 0x%lx\n",
+ cfg.flags, bus_flags, common_flags);
+
/* Make choices, based on platform preferences */
- if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
if (mx3_cam->platform_flags & MX3_CAMERA_HSP)
- common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
if (mx3_cam->platform_flags & MX3_CAMERA_VSP)
- common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
- (common_flags & SOCAM_DATA_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_DATA_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)) {
if (mx3_cam->platform_flags & MX3_CAMERA_DP)
- common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_DATA_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_DATA_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
- (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+ if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+ (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
if (mx3_cam->platform_flags & MX3_CAMERA_PCP)
- common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
else
- common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
}
- /*
- * Make the camera work in widest common mode, we'll take care of
- * the rest
- */
- if (common_flags & SOCAM_DATAWIDTH_15)
- common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
- SOCAM_DATAWIDTH_15;
- else if (common_flags & SOCAM_DATAWIDTH_10)
- common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
- SOCAM_DATAWIDTH_10;
- else if (common_flags & SOCAM_DATAWIDTH_8)
- common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
- SOCAM_DATAWIDTH_8;
- else
- common_flags = (common_flags & ~SOCAM_DATAWIDTH_MASK) |
- SOCAM_DATAWIDTH_4;
-
- ret = icd->ops->set_bus_param(icd, common_flags);
- if (ret < 0) {
- dev_dbg(dev, "camera set_bus_param(%lx) returned %d\n",
+ cfg.flags = common_flags;
+ ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
common_flags, ret);
return ret;
}
@@ -1108,13 +1093,13 @@
/* This has been set in mx3_camera_activate(), but we clear it above */
sens_conf |= CSI_SENS_CONF_DATA_FMT_BAYER;
- if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
+ if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
sens_conf |= 1 << CSI_SENS_CONF_PIX_CLK_POL_SHIFT;
- if (common_flags & SOCAM_HSYNC_ACTIVE_LOW)
+ if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
sens_conf |= 1 << CSI_SENS_CONF_HSYNC_POL_SHIFT;
- if (common_flags & SOCAM_VSYNC_ACTIVE_LOW)
+ if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
sens_conf |= 1 << CSI_SENS_CONF_VSYNC_POL_SHIFT;
- if (common_flags & SOCAM_DATA_ACTIVE_LOW)
+ if (common_flags & V4L2_MBUS_DATA_ACTIVE_LOW)
sens_conf |= 1 << CSI_SENS_CONF_DATA_POL_SHIFT;
/* Just do what we're asked to do */
@@ -1199,6 +1184,14 @@
"data widths, using default 8 bit\n");
mx3_cam->platform_flags |= MX3_CAMERA_DATAWIDTH_8;
}
+ if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_4)
+ mx3_cam->width_flags = 1 << 3;
+ if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_8)
+ mx3_cam->width_flags |= 1 << 7;
+ if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_10)
+ mx3_cam->width_flags |= 1 << 9;
+ if (mx3_cam->platform_flags & MX3_CAMERA_DATAWIDTH_15)
+ mx3_cam->width_flags |= 1 << 14;
mx3_cam->mclk = mx3_cam->pdata->mclk_10khz * 10000;
if (!mx3_cam->mclk) {
@@ -1281,8 +1274,6 @@
dmaengine_put();
- dev_info(&pdev->dev, "i.MX3x Camera driver unloaded\n");
-
return 0;
}
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 30d8896..9c5c19f 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -833,6 +833,15 @@
/*
* File operations
*/
+static unsigned int omap_vout_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ struct omap_vout_device *vout = file->private_data;
+ struct videobuf_queue *q = &vout->vbq;
+
+ return videobuf_poll_stream(file, q, wait);
+}
+
static void omap_vout_vm_open(struct vm_area_struct *vma)
{
struct omap_vout_device *vout = vma->vm_private_data;
@@ -1861,6 +1870,7 @@
static const struct v4l2_file_operations omap_vout_fops = {
.owner = THIS_MODULE,
+ .poll = omap_vout_poll,
.unlocked_ioctl = video_ioctl2,
.mmap = omap_vout_mmap,
.open = omap_vout_open,
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index 8a947e6..e87ae2f 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -102,10 +102,10 @@
/* end of OMAP1 Camera Interface registers */
-#define SOCAM_BUS_FLAGS (SOCAM_MASTER | \
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | \
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8)
+#define SOCAM_BUS_FLAGS (V4L2_MBUS_MASTER | \
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING | \
+ V4L2_MBUS_DATA_ACTIVE_HIGH)
#define FIFO_SIZE ((THRESHOLD_MASK >> THRESHOLD_SHIFT) + 1)
@@ -1438,41 +1438,55 @@
static int omap1_cam_set_bus_param(struct soc_camera_device *icd,
__u32 pixfmt)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct device *dev = icd->parent;
struct soc_camera_host *ici = to_soc_camera_host(dev);
struct omap1_cam_dev *pcdev = ici->priv;
const struct soc_camera_format_xlate *xlate;
const struct soc_mbus_pixelfmt *fmt;
- unsigned long camera_flags, common_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long common_flags;
u32 ctrlclock, mode;
int ret;
- camera_flags = icd->ops->query_bus_param(icd);
-
- common_flags = soc_camera_bus_param_compatible(camera_flags,
- SOCAM_BUS_FLAGS);
- if (!common_flags)
- return -EINVAL;
-
- /* Make choices, possibly based on platform configuration */
- if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
- (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
- if (!pcdev->pdata ||
- pcdev->pdata->flags & OMAP1_CAMERA_LCLK_RISING)
- common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
- else
- common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg, SOCAM_BUS_FLAGS);
+ if (!common_flags) {
+ dev_warn(dev,
+ "Flags incompatible: camera 0x%x, host 0x%x\n",
+ cfg.flags, SOCAM_BUS_FLAGS);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ } else {
+ common_flags = SOCAM_BUS_FLAGS;
}
- ret = icd->ops->set_bus_param(icd, common_flags);
- if (ret < 0)
+ /* Make choices, possibly based on platform configuration */
+ if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+ (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
+ if (!pcdev->pdata ||
+ pcdev->pdata->flags & OMAP1_CAMERA_LCLK_RISING)
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
+ else
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
+ }
+
+ cfg.flags = common_flags;
+ ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ dev_dbg(dev, "camera s_mbus_config(0x%lx) returned %d\n",
+ common_flags, ret);
return ret;
+ }
ctrlclock = CAM_READ_CACHE(pcdev, CTRLCLOCK);
if (ctrlclock & LCLK_EN)
CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock & ~LCLK_EN);
- if (common_flags & SOCAM_PCLK_SAMPLE_RISING) {
+ if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) {
dev_dbg(dev, "CTRLCLOCK_REG |= POLCLK\n");
ctrlclock |= POLCLK;
} else {
@@ -1565,10 +1579,10 @@
pcdev->clk = clk;
pcdev->pdata = pdev->dev.platform_data;
- pcdev->pflags = pcdev->pdata->flags;
-
- if (pcdev->pdata)
+ if (pcdev->pdata) {
+ pcdev->pflags = pcdev->pdata->flags;
pcdev->camexclk = pcdev->pdata->camexclk_khz * 1000;
+ }
switch (pcdev->camexclk) {
case 6000000:
@@ -1578,6 +1592,7 @@
case 24000000:
break;
default:
+ /* pcdev->camexclk != 0 => pcdev->pdata != NULL */
dev_warn(&pdev->dev,
"Incorrect sensor clock frequency %ld kHz, "
"should be one of 0, 6, 8, 9.6, 12 or 24 MHz, "
@@ -1585,8 +1600,7 @@
pcdev->pdata->camexclk_khz);
pcdev->camexclk = 0;
case 0:
- dev_info(&pdev->dev,
- "Not providing sensor clock\n");
+ dev_info(&pdev->dev, "Not providing sensor clock\n");
}
INIT_LIST_HEAD(&pcdev->capture);
@@ -1716,5 +1730,5 @@
MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
MODULE_LICENSE("GPL v2");
-MODULE_LICENSE(DRIVER_VERSION);
+MODULE_VERSION(DRIVER_VERSION);
MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 678e125..b818cac 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -1704,6 +1704,7 @@
isp->media_dev.dev = isp->dev;
strlcpy(isp->media_dev.model, "TI OMAP3 ISP",
sizeof(isp->media_dev.model));
+ isp->media_dev.hw_revision = isp->revision;
isp->media_dev.link_notify = isp_pipeline_link_notify;
ret = media_device_register(&isp->media_dev);
if (ret < 0) {
@@ -2210,6 +2211,8 @@
regulator_put(isp->isp_csiphy2.vdd);
regulator_put(isp->isp_csiphy1.vdd);
platform_set_drvdata(pdev, NULL);
+
+ mutex_destroy(&isp->isp_mutex);
kfree(isp);
return ret;
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 253fdcc..b0b0fa5 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -1836,7 +1836,7 @@
* callers to request an output size bigger than the input size
* up to the nearest multiple of 16.
*/
- fmt->width = clamp_t(u32, width, 32, (fmt->width + 15) & ~15);
+ fmt->width = clamp_t(u32, width, 32, fmt->width + 15);
fmt->width &= ~15;
fmt->height = clamp_t(u32, height, 32, fmt->height);
break;
@@ -2152,6 +2152,37 @@
.link_setup = ccdc_link_setup,
};
+void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc)
+{
+ v4l2_device_unregister_subdev(&ccdc->subdev);
+ omap3isp_video_unregister(&ccdc->video_out);
+}
+
+int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
+ struct v4l2_device *vdev)
+{
+ int ret;
+
+ /* Register the subdev and video node. */
+ ret = v4l2_device_register_subdev(vdev, &ccdc->subdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&ccdc->video_out, vdev);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+
+error:
+ omap3isp_ccdc_unregister_entities(ccdc);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP CCDC initialisation and cleanup
+ */
+
/*
* ccdc_init_entities - Initialize V4L2 subdev and media entity
* @ccdc: ISP CCDC module
@@ -2193,50 +2224,23 @@
ret = omap3isp_video_init(&ccdc->video_out, "CCDC");
if (ret < 0)
- return ret;
+ goto error_video;
/* Connect the CCDC subdev to the video node. */
ret = media_entity_create_link(&ccdc->subdev.entity, CCDC_PAD_SOURCE_OF,
&ccdc->video_out.video.entity, 0, 0);
if (ret < 0)
- return ret;
-
- return 0;
-}
-
-void omap3isp_ccdc_unregister_entities(struct isp_ccdc_device *ccdc)
-{
- media_entity_cleanup(&ccdc->subdev.entity);
-
- v4l2_device_unregister_subdev(&ccdc->subdev);
- omap3isp_video_unregister(&ccdc->video_out);
-}
-
-int omap3isp_ccdc_register_entities(struct isp_ccdc_device *ccdc,
- struct v4l2_device *vdev)
-{
- int ret;
-
- /* Register the subdev and video node. */
- ret = v4l2_device_register_subdev(vdev, &ccdc->subdev);
- if (ret < 0)
- goto error;
-
- ret = omap3isp_video_register(&ccdc->video_out, vdev);
- if (ret < 0)
- goto error;
+ goto error_link;
return 0;
-error:
- omap3isp_ccdc_unregister_entities(ccdc);
+error_link:
+ omap3isp_video_cleanup(&ccdc->video_out);
+error_video:
+ media_entity_cleanup(me);
return ret;
}
-/* -----------------------------------------------------------------------------
- * ISP CCDC initialisation and cleanup
- */
-
/*
* omap3isp_ccdc_init - CCDC module initialization.
* @dev: Device pointer specific to the OMAP3 ISP.
@@ -2248,6 +2252,7 @@
int omap3isp_ccdc_init(struct isp_device *isp)
{
struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
+ int ret;
spin_lock_init(&ccdc->lock);
init_waitqueue_head(&ccdc->wait);
@@ -2276,7 +2281,13 @@
ccdc->update = OMAP3ISP_CCDC_BLCLAMP;
ccdc_apply_controls(ccdc);
- return ccdc_init_entities(ccdc);
+ ret = ccdc_init_entities(ccdc);
+ if (ret < 0) {
+ mutex_destroy(&ccdc->ioctl_lock);
+ return ret;
+ }
+
+ return 0;
}
/*
@@ -2287,6 +2298,9 @@
{
struct isp_ccdc_device *ccdc = &isp->isp_ccdc;
+ omap3isp_video_cleanup(&ccdc->video_out);
+ media_entity_cleanup(&ccdc->subdev.entity);
+
/* Free LSC requests. As the CCDC is stopped there's no active request,
* so only the pending request and the free queue need to be handled.
*/
@@ -2296,4 +2310,6 @@
if (ccdc->fpc.fpcaddr != 0)
omap_iommu_vfree(isp->domain, isp->iommu, ccdc->fpc.fpcaddr);
+
+ mutex_destroy(&ccdc->ioctl_lock);
}
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index fa1d09b..904ca8c 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -1032,6 +1032,48 @@
};
/*
+ * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
+ * @ccp2: Pointer to ISP CCP2 device
+ */
+void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
+{
+ v4l2_device_unregister_subdev(&ccp2->subdev);
+ omap3isp_video_unregister(&ccp2->video_in);
+}
+
+/*
+ * omap3isp_ccp2_register_entities - Register the subdev media entity
+ * @ccp2: Pointer to ISP CCP2 device
+ * @vdev: Pointer to v4l device
+ * return negative error code or zero on success
+ */
+
+int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
+ struct v4l2_device *vdev)
+{
+ int ret;
+
+ /* Register the subdev and video nodes. */
+ ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&ccp2->video_in, vdev);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+
+error:
+ omap3isp_ccp2_unregister_entities(ccp2);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP ccp2 initialisation and cleanup
+ */
+
+/*
* ccp2_init_entities - Initialize ccp2 subdev and media entity.
* @ccp2: Pointer to ISP CCP2 device
* return negative error code or zero on success
@@ -1083,72 +1125,23 @@
ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
if (ret < 0)
- return ret;
+ goto error_video;
/* Connect the video node to the ccp2 subdev. */
ret = media_entity_create_link(&ccp2->video_in.video.entity, 0,
&ccp2->subdev.entity, CCP2_PAD_SINK, 0);
if (ret < 0)
- return ret;
+ goto error_link;
return 0;
-}
-/*
- * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
- * @ccp2: Pointer to ISP CCP2 device
- */
-void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
-{
+error_link:
+ omap3isp_video_cleanup(&ccp2->video_in);
+error_video:
media_entity_cleanup(&ccp2->subdev.entity);
-
- v4l2_device_unregister_subdev(&ccp2->subdev);
- omap3isp_video_unregister(&ccp2->video_in);
-}
-
-/*
- * omap3isp_ccp2_register_entities - Register the subdev media entity
- * @ccp2: Pointer to ISP CCP2 device
- * @vdev: Pointer to v4l device
- * return negative error code or zero on success
- */
-
-int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
- struct v4l2_device *vdev)
-{
- int ret;
-
- /* Register the subdev and video nodes. */
- ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
- if (ret < 0)
- goto error;
-
- ret = omap3isp_video_register(&ccp2->video_in, vdev);
- if (ret < 0)
- goto error;
-
- return 0;
-
-error:
- omap3isp_ccp2_unregister_entities(ccp2);
return ret;
}
-/* -----------------------------------------------------------------------------
- * ISP ccp2 initialisation and cleanup
- */
-
-/*
- * omap3isp_ccp2_cleanup - CCP2 un-initialization
- * @isp : Pointer to ISP device
- */
-void omap3isp_ccp2_cleanup(struct isp_device *isp)
-{
- struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
-
- regulator_put(ccp2->vdds_csib);
-}
-
/*
* omap3isp_ccp2_init - CCP2 initialization.
* @isp : Pointer to ISP device
@@ -1184,13 +1177,25 @@
}
ret = ccp2_init_entities(ccp2);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ regulator_put(ccp2->vdds_csib);
+ return ret;
+ }
ccp2_reset(ccp2);
-out:
- if (ret)
- omap3isp_ccp2_cleanup(isp);
+ return 0;
+}
- return ret;
+/*
+ * omap3isp_ccp2_cleanup - CCP2 un-initialization
+ * @isp : Pointer to ISP device
+ */
+void omap3isp_ccp2_cleanup(struct isp_device *isp)
+{
+ struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
+
+ omap3isp_video_cleanup(&ccp2->video_in);
+ media_entity_cleanup(&ccp2->subdev.entity);
+
+ regulator_put(ccp2->vdds_csib);
}
diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c
index 69161a6..0c5f1cb 100644
--- a/drivers/media/video/omap3isp/ispcsi2.c
+++ b/drivers/media/video/omap3isp/ispcsi2.c
@@ -1187,6 +1187,37 @@
.link_setup = csi2_link_setup,
};
+void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
+{
+ v4l2_device_unregister_subdev(&csi2->subdev);
+ omap3isp_video_unregister(&csi2->video_out);
+}
+
+int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
+ struct v4l2_device *vdev)
+{
+ int ret;
+
+ /* Register the subdev and video nodes. */
+ ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&csi2->video_out, vdev);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+
+error:
+ omap3isp_csi2_unregister_entities(csi2);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP CSI2 initialisation and cleanup
+ */
+
/*
* csi2_init_entities - Initialize subdev and media entity.
* @csi2: Pointer to csi2 structure.
@@ -1228,57 +1259,23 @@
ret = omap3isp_video_init(&csi2->video_out, "CSI2a");
if (ret < 0)
- return ret;
+ goto error_video;
/* Connect the CSI2 subdev to the video node. */
ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE,
&csi2->video_out.video.entity, 0, 0);
if (ret < 0)
- return ret;
+ goto error_link;
return 0;
-}
-void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2)
-{
+error_link:
+ omap3isp_video_cleanup(&csi2->video_out);
+error_video:
media_entity_cleanup(&csi2->subdev.entity);
-
- v4l2_device_unregister_subdev(&csi2->subdev);
- omap3isp_video_unregister(&csi2->video_out);
-}
-
-int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2,
- struct v4l2_device *vdev)
-{
- int ret;
-
- /* Register the subdev and video nodes. */
- ret = v4l2_device_register_subdev(vdev, &csi2->subdev);
- if (ret < 0)
- goto error;
-
- ret = omap3isp_video_register(&csi2->video_out, vdev);
- if (ret < 0)
- goto error;
-
- return 0;
-
-error:
- omap3isp_csi2_unregister_entities(csi2);
return ret;
}
-/* -----------------------------------------------------------------------------
- * ISP CSI2 initialisation and cleanup
- */
-
-/*
- * omap3isp_csi2_cleanup - Routine for module driver cleanup
- */
-void omap3isp_csi2_cleanup(struct isp_device *isp)
-{
-}
-
/*
* omap3isp_csi2_init - Routine for module driver init
*/
@@ -1298,7 +1295,7 @@
ret = csi2_init_entities(csi2a);
if (ret < 0)
- goto fail;
+ return ret;
if (isp->revision == ISP_REVISION_15_0) {
csi2c->isp = isp;
@@ -1311,7 +1308,15 @@
}
return 0;
-fail:
- omap3isp_csi2_cleanup(isp);
- return ret;
+}
+
+/*
+ * omap3isp_csi2_cleanup - Routine for module driver cleanup
+ */
+void omap3isp_csi2_cleanup(struct isp_device *isp)
+{
+ struct isp_csi2_device *csi2a = &isp->isp_csi2a;
+
+ omap3isp_video_cleanup(&csi2a->video_out);
+ media_entity_cleanup(&csi2a->subdev.entity);
}
diff --git a/drivers/media/video/omap3isp/isph3a_aewb.c b/drivers/media/video/omap3isp/isph3a_aewb.c
index 8068cef..a3c76bf 100644
--- a/drivers/media/video/omap3isp/isph3a_aewb.c
+++ b/drivers/media/video/omap3isp/isph3a_aewb.c
@@ -370,5 +370,5 @@
{
kfree(isp->isp_aewb.priv);
kfree(isp->isp_aewb.recover_priv);
- omap3isp_stat_free(&isp->isp_aewb);
+ omap3isp_stat_cleanup(&isp->isp_aewb);
}
diff --git a/drivers/media/video/omap3isp/isph3a_af.c b/drivers/media/video/omap3isp/isph3a_af.c
index ba54d0a..58e0bc4 100644
--- a/drivers/media/video/omap3isp/isph3a_af.c
+++ b/drivers/media/video/omap3isp/isph3a_af.c
@@ -425,5 +425,5 @@
{
kfree(isp->isp_af.priv);
kfree(isp->isp_af.recover_priv);
- omap3isp_stat_free(&isp->isp_af);
+ omap3isp_stat_cleanup(&isp->isp_af);
}
diff --git a/drivers/media/video/omap3isp/isphist.c b/drivers/media/video/omap3isp/isphist.c
index 1743856..1163907 100644
--- a/drivers/media/video/omap3isp/isphist.c
+++ b/drivers/media/video/omap3isp/isphist.c
@@ -516,5 +516,5 @@
if (HIST_USING_DMA(&isp->isp_hist))
omap_free_dma(isp->isp_hist.dma_ch);
kfree(isp->isp_hist.priv);
- omap3isp_stat_free(&isp->isp_hist);
+ omap3isp_stat_cleanup(&isp->isp_hist);
}
diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
index aba537a..ccb876f 100644
--- a/drivers/media/video/omap3isp/isppreview.c
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -76,9 +76,51 @@
#define DEF_DETECT_CORRECT_VAL 0xe
-#define PREV_MIN_WIDTH 64
-#define PREV_MIN_HEIGHT 8
-#define PREV_MAX_HEIGHT 16384
+/*
+ * Margins and image size limits.
+ *
+ * The preview engine crops several rows and columns internally depending on
+ * which filters are enabled. To avoid format changes when the filters are
+ * enabled or disabled (which would prevent them from being turned on or off
+ * during streaming), the driver assumes all the filters are enabled when
+ * computing sink crop and source format limits.
+ *
+ * If a filter is disabled, additional cropping is automatically added at the
+ * preview engine input by the driver to avoid overflow at line and frame end.
+ * This is completely transparent for applications.
+ *
+ * Median filter 4 pixels
+ * Noise filter,
+ * Faulty pixels correction 4 pixels, 4 lines
+ * CFA filter 4 pixels, 4 lines in Bayer mode
+ * 2 lines in other modes
+ * Color suppression 2 pixels
+ * or luma enhancement
+ * -------------------------------------------------------------
+ * Maximum total 14 pixels, 8 lines
+ *
+ * The color suppression and luma enhancement filters are applied after bayer to
+ * YUV conversion. They thus can crop one pixel on the left and one pixel on the
+ * right side of the image without changing the color pattern. When both those
+ * filters are disabled, the driver must crop the two pixels on the same side of
+ * the image to avoid changing the bayer pattern. The left margin is thus set to
+ * 8 pixels and the right margin to 6 pixels.
+ */
+
+#define PREV_MARGIN_LEFT 8
+#define PREV_MARGIN_RIGHT 6
+#define PREV_MARGIN_TOP 4
+#define PREV_MARGIN_BOTTOM 4
+
+#define PREV_MIN_IN_WIDTH 64
+#define PREV_MIN_IN_HEIGHT 8
+#define PREV_MAX_IN_HEIGHT 16384
+
+#define PREV_MIN_OUT_WIDTH 0
+#define PREV_MIN_OUT_HEIGHT 0
+#define PREV_MAX_OUT_WIDTH 1280
+#define PREV_MAX_OUT_WIDTH_ES2 3300
+#define PREV_MAX_OUT_WIDTH_3630 4096
/*
* Coeficient Tables for the submodules in Preview.
@@ -979,52 +1021,36 @@
* enabled when reporting source pad formats to userspace. If this assumption is
* not true, rows and columns must be manually cropped at the preview engine
* input to avoid overflows at the end of lines and frames.
+ *
+ * See the explanation at the PREV_MARGIN_* definitions for more details.
*/
static void preview_config_input_size(struct isp_prev_device *prev)
{
struct isp_device *isp = to_isp_device(prev);
struct prev_params *params = &prev->params;
- struct v4l2_mbus_framefmt *format = &prev->formats[PREV_PAD_SINK];
- unsigned int sph = 0;
- unsigned int eph = format->width - 1;
- unsigned int slv = 0;
- unsigned int elv = format->height - 1;
+ unsigned int sph = prev->crop.left;
+ unsigned int eph = prev->crop.left + prev->crop.width - 1;
+ unsigned int slv = prev->crop.top;
+ unsigned int elv = prev->crop.top + prev->crop.height - 1;
- if (prev->input == PREVIEW_INPUT_CCDC) {
- sph += 2;
- eph -= 2;
+ if (params->features & PREV_CFA) {
+ sph -= 2;
+ eph += 2;
+ slv -= 2;
+ elv += 2;
}
-
- /*
- * Median filter 4 pixels
- * Noise filter 4 pixels, 4 lines
- * or faulty pixels correction
- * CFA filter 4 pixels, 4 lines in Bayer mode
- * 2 lines in other modes
- * Color suppression 2 pixels
- * or luma enhancement
- * -------------------------------------------------------------
- * Maximum total 14 pixels, 8 lines
- */
-
- if (!(params->features & PREV_CFA)) {
- sph += 2;
- eph -= 2;
- slv += 2;
- elv -= 2;
+ if (params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER)) {
+ sph -= 2;
+ eph += 2;
+ slv -= 2;
+ elv += 2;
}
- if (!(params->features & (PREV_DEFECT_COR | PREV_NOISE_FILTER))) {
- sph += 2;
- eph -= 2;
- slv += 2;
- elv -= 2;
+ if (params->features & PREV_HORZ_MEDIAN_FILTER) {
+ sph -= 2;
+ eph += 2;
}
- if (!(params->features & PREV_HORZ_MEDIAN_FILTER)) {
- sph += 2;
- eph -= 2;
- }
- if (!(params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE)))
- sph += 2;
+ if (params->features & (PREV_CHROMA_SUPPRESS | PREV_LUMA_ENHANCE))
+ sph -= 2;
isp_reg_writel(isp, (sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | eph,
OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO);
@@ -1228,7 +1254,6 @@
/* Init values */
params->contrast = ISPPRV_CONTRAST_DEF * ISPPRV_CONTRAST_UNITS;
params->brightness = ISPPRV_BRIGHT_DEF * ISPPRV_BRIGHT_UNITS;
- params->average = NO_AVE;
params->cfa.format = OMAP3ISP_CFAFMT_BAYER;
memcpy(params->cfa.table, cfa_coef_table,
sizeof(params->cfa.table));
@@ -1281,14 +1306,14 @@
switch (isp->revision) {
case ISP_REVISION_1_0:
- return ISPPRV_MAXOUTPUT_WIDTH;
+ return PREV_MAX_OUT_WIDTH;
case ISP_REVISION_2_0:
default:
- return ISPPRV_MAXOUTPUT_WIDTH_ES2;
+ return PREV_MAX_OUT_WIDTH_ES2;
case ISP_REVISION_15_0:
- return ISPPRV_MAXOUTPUT_WIDTH_3630;
+ return PREV_MAX_OUT_WIDTH_3630;
}
}
@@ -1296,8 +1321,6 @@
{
struct isp_device *isp = to_isp_device(prev);
struct v4l2_mbus_framefmt *format;
- unsigned int max_out_width;
- unsigned int format_avg;
preview_setup_hw(prev);
@@ -1335,10 +1358,7 @@
preview_config_outlineoffset(prev,
ALIGN(format->width, 0x10) * 2);
- max_out_width = preview_max_out_width(prev);
-
- format_avg = fls(DIV_ROUND_UP(format->width, max_out_width) - 1);
- preview_config_averager(prev, format_avg);
+ preview_config_averager(prev, 0);
preview_config_ycpos(prev, format->code);
}
@@ -1597,6 +1617,16 @@
return &prev->formats[pad];
}
+static struct v4l2_rect *
+__preview_get_crop(struct isp_prev_device *prev, struct v4l2_subdev_fh *fh,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_crop(fh, PREV_PAD_SINK);
+ else
+ return &prev->crop;
+}
+
/* previewer format descriptions */
static const unsigned int preview_input_fmts[] = {
V4L2_MBUS_FMT_SGRBG10_1X10,
@@ -1611,24 +1641,25 @@
};
/*
- * preview_try_format - Handle try format by pad subdev method
- * @prev: ISP preview device
- * @fh : V4L2 subdev file handle
- * @pad: pad num
- * @fmt: pointer to v4l2 format structure
+ * preview_try_format - Validate a format
+ * @prev: ISP preview engine
+ * @fh: V4L2 subdev file handle
+ * @pad: pad number
+ * @fmt: format to be validated
+ * @which: try/active format selector
+ *
+ * Validate and adjust the given format for the given pad based on the preview
+ * engine limits and the format and crop rectangles on other pads.
*/
static void preview_try_format(struct isp_prev_device *prev,
struct v4l2_subdev_fh *fh, unsigned int pad,
struct v4l2_mbus_framefmt *fmt,
enum v4l2_subdev_format_whence which)
{
- struct v4l2_mbus_framefmt *format;
- unsigned int max_out_width;
enum v4l2_mbus_pixelcode pixelcode;
+ struct v4l2_rect *crop;
unsigned int i;
- max_out_width = preview_max_out_width(prev);
-
switch (pad) {
case PREV_PAD_SINK:
/* When reading data from the CCDC, the input size has already
@@ -1641,10 +1672,11 @@
* filter array interpolation.
*/
if (prev->input == PREVIEW_INPUT_MEMORY) {
- fmt->width = clamp_t(u32, fmt->width, PREV_MIN_WIDTH,
- max_out_width * 8);
- fmt->height = clamp_t(u32, fmt->height, PREV_MIN_HEIGHT,
- PREV_MAX_HEIGHT);
+ fmt->width = clamp_t(u32, fmt->width, PREV_MIN_IN_WIDTH,
+ preview_max_out_width(prev));
+ fmt->height = clamp_t(u32, fmt->height,
+ PREV_MIN_IN_HEIGHT,
+ PREV_MAX_IN_HEIGHT);
}
fmt->colorspace = V4L2_COLORSPACE_SRGB;
@@ -1661,15 +1693,8 @@
case PREV_PAD_SOURCE:
pixelcode = fmt->code;
- format = __preview_get_format(prev, fh, PREV_PAD_SINK, which);
- memcpy(fmt, format, sizeof(*fmt));
+ *fmt = *__preview_get_format(prev, fh, PREV_PAD_SINK, which);
- /* The preview module output size is configurable through the
- * input interface (horizontal and vertical cropping) and the
- * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). In
- * spite of this, hardcode the output size to the biggest
- * possible value for simplicity reasons.
- */
switch (pixelcode) {
case V4L2_MBUS_FMT_YUYV8_1X16:
case V4L2_MBUS_FMT_UYVY8_1X16:
@@ -1681,31 +1706,14 @@
break;
}
- /* The TRM states (12.1.4.7.1.2) that 2 pixels must be cropped
- * from the left and right sides when the input source is the
- * CCDC. This seems not to be needed in practice, investigation
- * is required.
+ /* The preview module output size is configurable through the
+ * averager (horizontal scaling by 1/1, 1/2, 1/4 or 1/8). This
+ * is not supported yet, hardcode the output size to the crop
+ * rectangle size.
*/
- if (prev->input == PREVIEW_INPUT_CCDC)
- fmt->width -= 4;
-
- /* The preview module can output a maximum of 3312 pixels
- * horizontally due to fixed memory-line sizes. Compute the
- * horizontal averaging factor accordingly. Note that the limit
- * applies to the noise filter and CFA interpolation blocks, so
- * it doesn't take cropping by further blocks into account.
- *
- * ES 1.0 hardware revision is limited to 1280 pixels
- * horizontally.
- */
- fmt->width >>= fls(DIV_ROUND_UP(fmt->width, max_out_width) - 1);
-
- /* Assume that all blocks are enabled and crop pixels and lines
- * accordingly. See preview_config_input_size() for more
- * information.
- */
- fmt->width -= 14;
- fmt->height -= 8;
+ crop = __preview_get_crop(prev, fh, which);
+ fmt->width = crop->width;
+ fmt->height = crop->height;
fmt->colorspace = V4L2_COLORSPACE_JPEG;
break;
@@ -1715,6 +1723,49 @@
}
/*
+ * preview_try_crop - Validate a crop rectangle
+ * @prev: ISP preview engine
+ * @sink: format on the sink pad
+ * @crop: crop rectangle to be validated
+ *
+ * The preview engine crops lines and columns for its internal operation,
+ * depending on which filters are enabled. Enforce minimum crop margins to
+ * handle that transparently for userspace.
+ *
+ * See the explanation at the PREV_MARGIN_* definitions for more details.
+ */
+static void preview_try_crop(struct isp_prev_device *prev,
+ const struct v4l2_mbus_framefmt *sink,
+ struct v4l2_rect *crop)
+{
+ unsigned int left = PREV_MARGIN_LEFT;
+ unsigned int right = sink->width - PREV_MARGIN_RIGHT;
+ unsigned int top = PREV_MARGIN_TOP;
+ unsigned int bottom = sink->height - PREV_MARGIN_BOTTOM;
+
+ /* When processing data on-the-fly from the CCDC, at least 2 pixels must
+ * be cropped from the left and right sides of the image. As we don't
+ * know which filters will be enabled, increase the left and right
+ * margins by two.
+ */
+ if (prev->input == PREVIEW_INPUT_CCDC) {
+ left += 2;
+ right -= 2;
+ }
+
+ /* Restrict left/top to even values to keep the Bayer pattern. */
+ crop->left &= ~1;
+ crop->top &= ~1;
+
+ crop->left = clamp_t(u32, crop->left, left, right - PREV_MIN_OUT_WIDTH);
+ crop->top = clamp_t(u32, crop->top, top, bottom - PREV_MIN_OUT_HEIGHT);
+ crop->width = clamp_t(u32, crop->width, PREV_MIN_OUT_WIDTH,
+ right - crop->left);
+ crop->height = clamp_t(u32, crop->height, PREV_MIN_OUT_HEIGHT,
+ bottom - crop->top);
+}
+
+/*
* preview_enum_mbus_code - Handle pixel format enumeration
* @sd : pointer to v4l2 subdev structure
* @fh : V4L2 subdev file handle
@@ -1776,6 +1827,60 @@
}
/*
+ * preview_get_crop - Retrieve the crop rectangle on a pad
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ * @crop: crop rectangle
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static int preview_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+
+ /* Cropping is only supported on the sink pad. */
+ if (crop->pad != PREV_PAD_SINK)
+ return -EINVAL;
+
+ crop->rect = *__preview_get_crop(prev, fh, crop->which);
+ return 0;
+}
+
+/*
+ * preview_set_crop - Retrieve the crop rectangle on a pad
+ * @sd: ISP preview V4L2 subdevice
+ * @fh: V4L2 subdev file handle
+ * @crop: crop rectangle
+ *
+ * Return 0 on success or a negative error code otherwise.
+ */
+static int preview_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
+ struct v4l2_mbus_framefmt *format;
+
+ /* Cropping is only supported on the sink pad. */
+ if (crop->pad != PREV_PAD_SINK)
+ return -EINVAL;
+
+ /* The crop rectangle can't be changed while streaming. */
+ if (prev->state != ISP_PIPELINE_STREAM_STOPPED)
+ return -EBUSY;
+
+ format = __preview_get_format(prev, fh, PREV_PAD_SINK, crop->which);
+ preview_try_crop(prev, format, &crop->rect);
+ *__preview_get_crop(prev, fh, crop->which) = crop->rect;
+
+ /* Update the source format. */
+ format = __preview_get_format(prev, fh, PREV_PAD_SOURCE, crop->which);
+ preview_try_format(prev, fh, PREV_PAD_SOURCE, format, crop->which);
+
+ return 0;
+}
+
+/*
* preview_get_format - Handle get format by pads subdev method
* @sd : pointer to v4l2 subdev structure
* @fh : V4L2 subdev file handle
@@ -1808,6 +1913,7 @@
{
struct isp_prev_device *prev = v4l2_get_subdevdata(sd);
struct v4l2_mbus_framefmt *format;
+ struct v4l2_rect *crop;
format = __preview_get_format(prev, fh, fmt->pad, fmt->which);
if (format == NULL)
@@ -1818,9 +1924,18 @@
/* Propagate the format from sink to source */
if (fmt->pad == PREV_PAD_SINK) {
+ /* Reset the crop rectangle. */
+ crop = __preview_get_crop(prev, fh, fmt->which);
+ crop->left = 0;
+ crop->top = 0;
+ crop->width = fmt->format.width;
+ crop->height = fmt->format.height;
+
+ preview_try_crop(prev, &fmt->format, crop);
+
+ /* Update the source format. */
format = __preview_get_format(prev, fh, PREV_PAD_SOURCE,
fmt->which);
- *format = fmt->format;
preview_try_format(prev, fh, PREV_PAD_SOURCE, format,
fmt->which);
}
@@ -1869,6 +1984,8 @@
.enum_frame_size = preview_enum_frame_size,
.get_fmt = preview_get_format,
.set_fmt = preview_set_format,
+ .get_crop = preview_get_crop,
+ .set_crop = preview_set_crop,
};
/* subdev operations */
@@ -1966,8 +2083,44 @@
.link_setup = preview_link_setup,
};
+void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
+{
+ v4l2_device_unregister_subdev(&prev->subdev);
+ omap3isp_video_unregister(&prev->video_in);
+ omap3isp_video_unregister(&prev->video_out);
+}
+
+int omap3isp_preview_register_entities(struct isp_prev_device *prev,
+ struct v4l2_device *vdev)
+{
+ int ret;
+
+ /* Register the subdev and video nodes. */
+ ret = v4l2_device_register_subdev(vdev, &prev->subdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&prev->video_in, vdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&prev->video_out, vdev);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+
+error:
+ omap3isp_preview_unregister_entities(prev);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP previewer initialisation and cleanup
+ */
+
/*
- * review_init_entities - Initialize subdev and media entity.
+ * preview_init_entities - Initialize subdev and media entity.
* @prev : Pointer to preview structure
* return -ENOMEM or zero on success
*/
@@ -2024,69 +2177,34 @@
ret = omap3isp_video_init(&prev->video_in, "preview");
if (ret < 0)
- return ret;
+ goto error_video_in;
ret = omap3isp_video_init(&prev->video_out, "preview");
if (ret < 0)
- return ret;
+ goto error_video_out;
/* Connect the video nodes to the previewer subdev. */
ret = media_entity_create_link(&prev->video_in.video.entity, 0,
&prev->subdev.entity, PREV_PAD_SINK, 0);
if (ret < 0)
- return ret;
+ goto error_link;
ret = media_entity_create_link(&prev->subdev.entity, PREV_PAD_SOURCE,
&prev->video_out.video.entity, 0, 0);
if (ret < 0)
- return ret;
+ goto error_link;
return 0;
-}
-void omap3isp_preview_unregister_entities(struct isp_prev_device *prev)
-{
+error_link:
+ omap3isp_video_cleanup(&prev->video_out);
+error_video_out:
+ omap3isp_video_cleanup(&prev->video_in);
+error_video_in:
media_entity_cleanup(&prev->subdev.entity);
-
- v4l2_device_unregister_subdev(&prev->subdev);
- v4l2_ctrl_handler_free(&prev->ctrls);
- omap3isp_video_unregister(&prev->video_in);
- omap3isp_video_unregister(&prev->video_out);
-}
-
-int omap3isp_preview_register_entities(struct isp_prev_device *prev,
- struct v4l2_device *vdev)
-{
- int ret;
-
- /* Register the subdev and video nodes. */
- ret = v4l2_device_register_subdev(vdev, &prev->subdev);
- if (ret < 0)
- goto error;
-
- ret = omap3isp_video_register(&prev->video_in, vdev);
- if (ret < 0)
- goto error;
-
- ret = omap3isp_video_register(&prev->video_out, vdev);
- if (ret < 0)
- goto error;
-
- return 0;
-
-error:
- omap3isp_preview_unregister_entities(prev);
return ret;
}
-/* -----------------------------------------------------------------------------
- * ISP previewer initialisation and cleanup
- */
-
-void omap3isp_preview_cleanup(struct isp_device *isp)
-{
-}
-
/*
* isp_preview_init - Previewer initialization.
* @dev : Pointer to ISP device
@@ -2095,19 +2213,20 @@
int omap3isp_preview_init(struct isp_device *isp)
{
struct isp_prev_device *prev = &isp->isp_prev;
- int ret;
spin_lock_init(&prev->lock);
init_waitqueue_head(&prev->wait);
preview_init_params(prev);
- ret = preview_init_entities(prev);
- if (ret < 0)
- goto out;
+ return preview_init_entities(prev);
+}
-out:
- if (ret)
- omap3isp_preview_cleanup(isp);
+void omap3isp_preview_cleanup(struct isp_device *isp)
+{
+ struct isp_prev_device *prev = &isp->isp_prev;
- return ret;
+ v4l2_ctrl_handler_free(&prev->ctrls);
+ omap3isp_video_cleanup(&prev->video_in);
+ omap3isp_video_cleanup(&prev->video_out);
+ media_entity_cleanup(&prev->subdev.entity);
}
diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h
index fa943bd..f54e775 100644
--- a/drivers/media/video/omap3isp/isppreview.h
+++ b/drivers/media/video/omap3isp/isppreview.h
@@ -45,11 +45,6 @@
#define ISPPRV_CONTRAST_HIGH 0xFF
#define ISPPRV_CONTRAST_UNITS 0x1
-#define NO_AVE 0x0
-#define AVE_2_PIX 0x1
-#define AVE_4_PIX 0x2
-#define AVE_8_PIX 0x3
-
/* Features list */
#define PREV_LUMA_ENHANCE OMAP3ISP_PREV_LUMAENH
#define PREV_INVERSE_ALAW OMAP3ISP_PREV_INVALAW
@@ -106,7 +101,6 @@
* @rgb2ycbcr: RGB to ycbcr parameters.
* @hmed: Horizontal median filter.
* @yclimit: YC limits parameters.
- * @average: Downsampling rate for averager.
* @contrast: Contrast.
* @brightness: Brightness.
*/
@@ -124,7 +118,6 @@
struct omap3isp_prev_csc rgb2ycbcr;
struct omap3isp_prev_hmed hmed;
struct omap3isp_prev_yclimit yclimit;
- u8 average;
u8 contrast;
u8 brightness;
};
@@ -159,6 +152,7 @@
* @subdev: V4L2 subdevice
* @pads: Media entity pads
* @formats: Active formats at the subdev pad
+ * @crop: Active crop rectangle
* @input: Module currently connected to the input pad
* @output: Bitmask of the active output
* @video_in: Input video entity
@@ -177,6 +171,7 @@
struct v4l2_subdev subdev;
struct media_pad pads[PREV_PADS_NUM];
struct v4l2_mbus_framefmt formats[PREV_PADS_NUM];
+ struct v4l2_rect crop;
struct v4l2_ctrl_handler ctrls;
diff --git a/drivers/media/video/omap3isp/ispreg.h b/drivers/media/video/omap3isp/ispreg.h
index 69f6af6..084ea77 100644
--- a/drivers/media/video/omap3isp/ispreg.h
+++ b/drivers/media/video/omap3isp/ispreg.h
@@ -402,9 +402,6 @@
#define ISPPRV_YENH_TABLE_ADDR 0x1000
#define ISPPRV_CFA_TABLE_ADDR 0x1400
-#define ISPPRV_MAXOUTPUT_WIDTH 1280
-#define ISPPRV_MAXOUTPUT_WIDTH_ES2 3300
-#define ISPPRV_MAXOUTPUT_WIDTH_3630 4096
#define ISPRSZ_MIN_OUTPUT 64
#define ISPRSZ_MAX_OUTPUT 3312
diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c
index 0bb0f8c..50e593b 100644
--- a/drivers/media/video/omap3isp/ispresizer.c
+++ b/drivers/media/video/omap3isp/ispresizer.c
@@ -1608,6 +1608,42 @@
.link_setup = resizer_link_setup,
};
+void omap3isp_resizer_unregister_entities(struct isp_res_device *res)
+{
+ v4l2_device_unregister_subdev(&res->subdev);
+ omap3isp_video_unregister(&res->video_in);
+ omap3isp_video_unregister(&res->video_out);
+}
+
+int omap3isp_resizer_register_entities(struct isp_res_device *res,
+ struct v4l2_device *vdev)
+{
+ int ret;
+
+ /* Register the subdev and video nodes. */
+ ret = v4l2_device_register_subdev(vdev, &res->subdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&res->video_in, vdev);
+ if (ret < 0)
+ goto error;
+
+ ret = omap3isp_video_register(&res->video_out, vdev);
+ if (ret < 0)
+ goto error;
+
+ return 0;
+
+error:
+ omap3isp_resizer_unregister_entities(res);
+ return ret;
+}
+
+/* -----------------------------------------------------------------------------
+ * ISP resizer initialization and cleanup
+ */
+
/*
* resizer_init_entities - Initialize resizer subdev and media entity.
* @res : Pointer to resizer device structure
@@ -1652,68 +1688,34 @@
ret = omap3isp_video_init(&res->video_in, "resizer");
if (ret < 0)
- return ret;
+ goto error_video_in;
ret = omap3isp_video_init(&res->video_out, "resizer");
if (ret < 0)
- return ret;
+ goto error_video_out;
/* Connect the video nodes to the resizer subdev. */
ret = media_entity_create_link(&res->video_in.video.entity, 0,
&res->subdev.entity, RESZ_PAD_SINK, 0);
if (ret < 0)
- return ret;
+ goto error_link;
ret = media_entity_create_link(&res->subdev.entity, RESZ_PAD_SOURCE,
&res->video_out.video.entity, 0, 0);
if (ret < 0)
- return ret;
+ goto error_link;
return 0;
-}
-void omap3isp_resizer_unregister_entities(struct isp_res_device *res)
-{
+error_link:
+ omap3isp_video_cleanup(&res->video_out);
+error_video_out:
+ omap3isp_video_cleanup(&res->video_in);
+error_video_in:
media_entity_cleanup(&res->subdev.entity);
-
- v4l2_device_unregister_subdev(&res->subdev);
- omap3isp_video_unregister(&res->video_in);
- omap3isp_video_unregister(&res->video_out);
-}
-
-int omap3isp_resizer_register_entities(struct isp_res_device *res,
- struct v4l2_device *vdev)
-{
- int ret;
-
- /* Register the subdev and video nodes. */
- ret = v4l2_device_register_subdev(vdev, &res->subdev);
- if (ret < 0)
- goto error;
-
- ret = omap3isp_video_register(&res->video_in, vdev);
- if (ret < 0)
- goto error;
-
- ret = omap3isp_video_register(&res->video_out, vdev);
- if (ret < 0)
- goto error;
-
- return 0;
-
-error:
- omap3isp_resizer_unregister_entities(res);
return ret;
}
-/* -----------------------------------------------------------------------------
- * ISP resizer initialization and cleanup
- */
-
-void omap3isp_resizer_cleanup(struct isp_device *isp)
-{
-}
-
/*
* isp_resizer_init - Resizer initialization.
* @isp : Pointer to ISP device
@@ -1722,17 +1724,17 @@
int omap3isp_resizer_init(struct isp_device *isp)
{
struct isp_res_device *res = &isp->isp_res;
- int ret;
init_waitqueue_head(&res->wait);
atomic_set(&res->stopping, 0);
- ret = resizer_init_entities(res);
- if (ret < 0)
- goto out;
+ return resizer_init_entities(res);
+}
-out:
- if (ret)
- omap3isp_resizer_cleanup(isp);
+void omap3isp_resizer_cleanup(struct isp_device *isp)
+{
+ struct isp_res_device *res = &isp->isp_res;
- return ret;
+ omap3isp_video_cleanup(&res->video_in);
+ omap3isp_video_cleanup(&res->video_out);
+ media_entity_cleanup(&res->subdev.entity);
}
diff --git a/drivers/media/video/omap3isp/ispstat.c b/drivers/media/video/omap3isp/ispstat.c
index 7329055..68d5394 100644
--- a/drivers/media/video/omap3isp/ispstat.c
+++ b/drivers/media/video/omap3isp/ispstat.c
@@ -1023,24 +1023,6 @@
__stat_isr(stat, 1);
}
-static int isp_stat_init_entities(struct ispstat *stat, const char *name,
- const struct v4l2_subdev_ops *sd_ops)
-{
- struct v4l2_subdev *subdev = &stat->subdev;
- struct media_entity *me = &subdev->entity;
-
- v4l2_subdev_init(subdev, sd_ops);
- snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name);
- subdev->grp_id = 1 << 16; /* group ID for isp subdevs */
- subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
- v4l2_set_subdevdata(subdev, stat);
-
- stat->pad.flags = MEDIA_PAD_FL_SINK;
- me->ops = NULL;
-
- return media_entity_init(me, 1, &stat->pad, 0);
-}
-
int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
struct v4l2_fh *fh,
struct v4l2_event_subscription *sub)
@@ -1062,7 +1044,6 @@
void omap3isp_stat_unregister_entities(struct ispstat *stat)
{
- media_entity_cleanup(&stat->subdev.entity);
v4l2_device_unregister_subdev(&stat->subdev);
}
@@ -1072,21 +1053,50 @@
return v4l2_device_register_subdev(vdev, &stat->subdev);
}
+static int isp_stat_init_entities(struct ispstat *stat, const char *name,
+ const struct v4l2_subdev_ops *sd_ops)
+{
+ struct v4l2_subdev *subdev = &stat->subdev;
+ struct media_entity *me = &subdev->entity;
+
+ v4l2_subdev_init(subdev, sd_ops);
+ snprintf(subdev->name, V4L2_SUBDEV_NAME_SIZE, "OMAP3 ISP %s", name);
+ subdev->grp_id = 1 << 16; /* group ID for isp subdevs */
+ subdev->flags |= V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_HAS_DEVNODE;
+ v4l2_set_subdevdata(subdev, stat);
+
+ stat->pad.flags = MEDIA_PAD_FL_SINK;
+ me->ops = NULL;
+
+ return media_entity_init(me, 1, &stat->pad, 0);
+}
+
int omap3isp_stat_init(struct ispstat *stat, const char *name,
const struct v4l2_subdev_ops *sd_ops)
{
+ int ret;
+
stat->buf = kcalloc(STAT_MAX_BUFS, sizeof(*stat->buf), GFP_KERNEL);
if (!stat->buf)
return -ENOMEM;
+
isp_stat_buf_clear(stat);
mutex_init(&stat->ioctl_lock);
atomic_set(&stat->buf_err, 0);
- return isp_stat_init_entities(stat, name, sd_ops);
+ ret = isp_stat_init_entities(stat, name, sd_ops);
+ if (ret < 0) {
+ mutex_destroy(&stat->ioctl_lock);
+ kfree(stat->buf);
+ }
+
+ return ret;
}
-void omap3isp_stat_free(struct ispstat *stat)
+void omap3isp_stat_cleanup(struct ispstat *stat)
{
+ media_entity_cleanup(&stat->subdev.entity);
+ mutex_destroy(&stat->ioctl_lock);
isp_stat_bufs_free(stat);
kfree(stat->buf);
}
diff --git a/drivers/media/video/omap3isp/ispstat.h b/drivers/media/video/omap3isp/ispstat.h
index d86da94..9b7c865 100644
--- a/drivers/media/video/omap3isp/ispstat.h
+++ b/drivers/media/video/omap3isp/ispstat.h
@@ -144,7 +144,7 @@
struct omap3isp_stat_data *data);
int omap3isp_stat_init(struct ispstat *stat, const char *name,
const struct v4l2_subdev_ops *sd_ops);
-void omap3isp_stat_free(struct ispstat *stat);
+void omap3isp_stat_cleanup(struct ispstat *stat);
int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev,
struct v4l2_fh *fh,
struct v4l2_event_subscription *sub);
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index 0cb8a9f..d100072 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -1325,6 +1325,13 @@
return 0;
}
+void omap3isp_video_cleanup(struct isp_video *video)
+{
+ media_entity_cleanup(&video->video.entity);
+ mutex_destroy(&video->stream_lock);
+ mutex_destroy(&video->mutex);
+}
+
int omap3isp_video_register(struct isp_video *video, struct v4l2_device *vdev)
{
int ret;
@@ -1341,8 +1348,6 @@
void omap3isp_video_unregister(struct isp_video *video)
{
- if (video_is_registered(&video->video)) {
- media_entity_cleanup(&video->video.entity);
+ if (video_is_registered(&video->video))
video_unregister_device(&video->video);
- }
}
diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h
index 53160aa..08cbfa1 100644
--- a/drivers/media/video/omap3isp/ispvideo.h
+++ b/drivers/media/video/omap3isp/ispvideo.h
@@ -190,6 +190,7 @@
container_of(q, struct isp_video_fh, queue)
int omap3isp_video_init(struct isp_video *video, const char *name);
+void omap3isp_video_cleanup(struct isp_video *video);
int omap3isp_video_register(struct isp_video *video,
struct v4l2_device *vdev);
void omap3isp_video_unregister(struct isp_video *video);
diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
index 9ce2fa0..b5247cb 100644
--- a/drivers/media/video/ov2640.c
+++ b/drivers/media/video/ov2640.c
@@ -18,11 +18,13 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-subdev.h>
-#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
+#include <media/v4l2-ctrls.h>
#define VAL_SET(x, mask, rshift, lshift) \
((((x) >> rshift) & mask) << lshift)
@@ -299,12 +301,10 @@
struct ov2640_priv {
struct v4l2_subdev subdev;
- struct ov2640_camera_info *info;
+ struct v4l2_ctrl_handler hdl;
enum v4l2_mbus_pixelcode cfmt_code;
const struct ov2640_win_size *win;
int model;
- u16 flag_vflip:1;
- u16 flag_hflip:1;
};
/*
@@ -610,29 +610,6 @@
};
/*
- * Supported controls
- */
-static const struct v4l2_queryctrl ov2640_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
-};
-
-/*
* General functions
*/
static struct ov2640_priv *to_ov2640(const struct i2c_client *client)
@@ -701,81 +678,23 @@
return 0;
}
-static int ov2640_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
+static int ov2640_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
-
- /* Only one width bit may be set */
- if (!is_power_of_2(width_flag))
- return -EINVAL;
-
- if (icl->set_bus_param)
- return icl->set_bus_param(icl, width_flag);
-
- /*
- * Without board specific bus width settings we support only the
- * sensors native bus width witch are tested working
- */
- if (width_flag & (SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8))
- return 0;
-
- return 0;
-}
-
-static unsigned long ov2640_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH;
-
- if (icl->query_bus_param)
- flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
- else
- flags |= SOCAM_DATAWIDTH_10;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static int ov2640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
+ struct v4l2_subdev *sd =
+ &container_of(ctrl->handler, struct ov2640_priv, hdl)->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov2640_priv *priv = to_ov2640(client);
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- ctrl->value = priv->flag_vflip;
- break;
- case V4L2_CID_HFLIP:
- ctrl->value = priv->flag_hflip;
- break;
- }
- return 0;
-}
-
-static int ov2640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov2640_priv *priv = to_ov2640(client);
- int ret = 0;
u8 val;
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- val = ctrl->value ? REG04_VFLIP_IMG : 0x00;
- priv->flag_vflip = ctrl->value ? 1 : 0;
- ret = ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
- break;
+ val = ctrl->val ? REG04_VFLIP_IMG : 0x00;
+ return ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
case V4L2_CID_HFLIP:
- val = ctrl->value ? REG04_HFLIP_IMG : 0x00;
- priv->flag_hflip = ctrl->value ? 1 : 0;
- ret = ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
- break;
+ val = ctrl->val ? REG04_HFLIP_IMG : 0x00;
+ return ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
}
- return ret;
+ return -EINVAL;
}
static int ov2640_g_chip_ident(struct v4l2_subdev *sd,
@@ -1023,18 +942,13 @@
return 0;
}
-static int ov2640_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int ov2640_video_probe(struct i2c_client *client)
{
struct ov2640_priv *priv = to_ov2640(client);
u8 pid, ver, midh, midl;
const char *devname;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/*
* check and show product ID and manufacturer ID
*/
@@ -1060,22 +974,17 @@
"%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
devname, pid, ver, midh, midl);
- return 0;
+ return v4l2_ctrl_handler_setup(&priv->hdl);
err:
return ret;
}
-static struct soc_camera_ops ov2640_ops = {
- .set_bus_param = ov2640_set_bus_param,
- .query_bus_param = ov2640_query_bus_param,
- .controls = ov2640_controls,
- .num_controls = ARRAY_SIZE(ov2640_controls),
+static const struct v4l2_ctrl_ops ov2640_ctrl_ops = {
+ .s_ctrl = ov2640_s_ctrl,
};
static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
- .g_ctrl = ov2640_g_ctrl,
- .s_ctrl = ov2640_s_ctrl,
.g_chip_ident = ov2640_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = ov2640_g_register,
@@ -1083,6 +992,21 @@
#endif
};
+static int ov2640_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
.s_stream = ov2640_s_stream,
.g_mbus_fmt = ov2640_g_fmt,
@@ -1091,6 +1015,7 @@
.cropcap = ov2640_cropcap,
.g_crop = ov2640_g_crop,
.enum_mbus_fmt = ov2640_enum_fmt,
+ .g_mbus_config = ov2640_g_mbus_config,
};
static struct v4l2_subdev_ops ov2640_subdev_ops = {
@@ -1104,18 +1029,11 @@
static int ov2640_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
- struct ov2640_priv *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
- int ret;
+ struct ov2640_priv *priv;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ int ret;
- if (!icd) {
- dev_err(&adapter->dev, "OV2640: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&adapter->dev,
"OV2640: Missing platform_data for driver\n");
@@ -1135,15 +1053,23 @@
return -ENOMEM;
}
- priv->info = icl->priv;
-
v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
+ v4l2_ctrl_handler_init(&priv->hdl, 2);
+ v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov2640_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ priv->subdev.ctrl_handler = &priv->hdl;
+ if (priv->hdl.error) {
+ int err = priv->hdl.error;
- icd->ops = &ov2640_ops;
+ kfree(priv);
+ return err;
+ }
- ret = ov2640_video_probe(icd, client);
+ ret = ov2640_video_probe(client);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
} else {
dev_info(&adapter->dev, "OV2640 Probed\n");
@@ -1155,9 +1081,9 @@
static int ov2640_remove(struct i2c_client *client)
{
struct ov2640_priv *priv = to_ov2640(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- icd->ops = NULL;
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/ov5642.c b/drivers/media/video/ov5642.c
index 349a4ad..bb37ec8 100644
--- a/drivers/media/video/ov5642.c
+++ b/drivers/media/video/ov5642.c
@@ -14,14 +14,16 @@
* published by the Free Software Foundation.
*/
+#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/module.h>
+#include <linux/v4l2-mediabus.h>
#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-subdev.h>
@@ -35,7 +37,7 @@
#define REG_WINDOW_START_Y_LOW 0x3803
#define REG_WINDOW_WIDTH_HIGH 0x3804
#define REG_WINDOW_WIDTH_LOW 0x3805
-#define REG_WINDOW_HEIGHT_HIGH 0x3806
+#define REG_WINDOW_HEIGHT_HIGH 0x3806
#define REG_WINDOW_HEIGHT_LOW 0x3807
#define REG_OUT_WIDTH_HIGH 0x3808
#define REG_OUT_WIDTH_LOW 0x3809
@@ -45,20 +47,45 @@
#define REG_OUT_TOTAL_WIDTH_LOW 0x380d
#define REG_OUT_TOTAL_HEIGHT_HIGH 0x380e
#define REG_OUT_TOTAL_HEIGHT_LOW 0x380f
+#define REG_OUTPUT_FORMAT 0x4300
+#define REG_ISP_CTRL_01 0x5001
+#define REG_AVG_WINDOW_END_X_HIGH 0x5682
+#define REG_AVG_WINDOW_END_X_LOW 0x5683
+#define REG_AVG_WINDOW_END_Y_HIGH 0x5686
+#define REG_AVG_WINDOW_END_Y_LOW 0x5687
-/*
- * define standard resolution.
- * Works currently only for up to 720 lines
- * eg. 320x240, 640x480, 800x600, 1280x720, 2048x720
- */
-
-#define OV5642_WIDTH 1280
-#define OV5642_HEIGHT 720
-#define OV5642_TOTAL_WIDTH 3200
-#define OV5642_TOTAL_HEIGHT 2000
+/* active pixel array size */
#define OV5642_SENSOR_SIZE_X 2592
#define OV5642_SENSOR_SIZE_Y 1944
+/*
+ * About OV5642 resolution, cropping and binning:
+ * This sensor supports it all, at least in the feature description.
+ * Unfortunately, no combination of appropriate registers settings could make
+ * the chip work the intended way. As it works with predefined register lists,
+ * some undocumented registers are presumably changed there to achieve their
+ * goals.
+ * This driver currently only works for resolutions up to 720 lines with a
+ * 1:1 scale. Hopefully these restrictions will be removed in the future.
+ */
+#define OV5642_MAX_WIDTH OV5642_SENSOR_SIZE_X
+#define OV5642_MAX_HEIGHT 720
+
+/* default sizes */
+#define OV5642_DEFAULT_WIDTH 1280
+#define OV5642_DEFAULT_HEIGHT OV5642_MAX_HEIGHT
+
+/* minimum extra blanking */
+#define BLANKING_EXTRA_WIDTH 500
+#define BLANKING_EXTRA_HEIGHT 20
+
+/*
+ * the sensor's autoexposure is buggy when setting total_height low.
+ * It tries to expose longer than 1 frame period without taking care of it
+ * and this leads to weird output. So we set 1000 lines as minimum.
+ */
+#define BLANKING_MIN_HEIGHT 1000
+
struct regval_list {
u16 reg_num;
u8 value;
@@ -582,6 +609,11 @@
struct ov5642 {
struct v4l2_subdev subdev;
const struct ov5642_datafmt *fmt;
+ struct v4l2_rect crop_rect;
+
+ /* blanking information */
+ int total_width;
+ int total_height;
};
static const struct ov5642_datafmt ov5642_colour_fmts[] = {
@@ -642,6 +674,21 @@
return 0;
}
+
+/*
+ * convenience function to write 16 bit register values that are split up
+ * into two consecutive high and low parts
+ */
+static int reg_write16(struct i2c_client *client, u16 reg, u16 val16)
+{
+ int ret;
+
+ ret = reg_write(client, reg, val16 >> 8);
+ if (ret)
+ return ret;
+ return reg_write(client, reg + 1, val16 & 0x00ff);
+}
+
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int ov5642_get_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
@@ -685,58 +732,55 @@
return 0;
}
-static int ov5642_set_resolution(struct i2c_client *client)
+static int ov5642_set_resolution(struct v4l2_subdev *sd)
{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct ov5642 *priv = to_ov5642(client);
+ int width = priv->crop_rect.width;
+ int height = priv->crop_rect.height;
+ int total_width = priv->total_width;
+ int total_height = priv->total_height;
+ int start_x = (OV5642_SENSOR_SIZE_X - width) / 2;
+ int start_y = (OV5642_SENSOR_SIZE_Y - height) / 2;
int ret;
- u8 start_x_high = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) >> 8;
- u8 start_x_low = ((OV5642_SENSOR_SIZE_X - OV5642_WIDTH) / 2) & 0xff;
- u8 start_y_high = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) >> 8;
- u8 start_y_low = ((OV5642_SENSOR_SIZE_Y - OV5642_HEIGHT) / 2) & 0xff;
- u8 width_high = OV5642_WIDTH >> 8;
- u8 width_low = OV5642_WIDTH & 0xff;
- u8 height_high = OV5642_HEIGHT >> 8;
- u8 height_low = OV5642_HEIGHT & 0xff;
-
- u8 total_width_high = OV5642_TOTAL_WIDTH >> 8;
- u8 total_width_low = OV5642_TOTAL_WIDTH & 0xff;
- u8 total_height_high = OV5642_TOTAL_HEIGHT >> 8;
- u8 total_height_low = OV5642_TOTAL_HEIGHT & 0xff;
-
- ret = reg_write(client, REG_WINDOW_START_X_HIGH, start_x_high);
+ /*
+ * This should set the starting point for cropping.
+ * Doesn't work so far.
+ */
+ ret = reg_write16(client, REG_WINDOW_START_X_HIGH, start_x);
if (!ret)
- ret = reg_write(client, REG_WINDOW_START_X_LOW, start_x_low);
- if (!ret)
- ret = reg_write(client, REG_WINDOW_START_Y_HIGH, start_y_high);
- if (!ret)
- ret = reg_write(client, REG_WINDOW_START_Y_LOW, start_y_low);
+ ret = reg_write16(client, REG_WINDOW_START_Y_HIGH, start_y);
+ if (!ret) {
+ priv->crop_rect.left = start_x;
+ priv->crop_rect.top = start_y;
+ }
if (!ret)
- ret = reg_write(client, REG_WINDOW_WIDTH_HIGH, width_high);
+ ret = reg_write16(client, REG_WINDOW_WIDTH_HIGH, width);
if (!ret)
- ret = reg_write(client, REG_WINDOW_WIDTH_LOW , width_low);
- if (!ret)
- ret = reg_write(client, REG_WINDOW_HEIGHT_HIGH, height_high);
- if (!ret)
- ret = reg_write(client, REG_WINDOW_HEIGHT_LOW, height_low);
+ ret = reg_write16(client, REG_WINDOW_HEIGHT_HIGH, height);
+ if (ret)
+ return ret;
+ priv->crop_rect.width = width;
+ priv->crop_rect.height = height;
+ /* Set the output window size. Only 1:1 scale is supported so far. */
+ ret = reg_write16(client, REG_OUT_WIDTH_HIGH, width);
if (!ret)
- ret = reg_write(client, REG_OUT_WIDTH_HIGH, width_high);
- if (!ret)
- ret = reg_write(client, REG_OUT_WIDTH_LOW , width_low);
- if (!ret)
- ret = reg_write(client, REG_OUT_HEIGHT_HIGH, height_high);
- if (!ret)
- ret = reg_write(client, REG_OUT_HEIGHT_LOW, height_low);
+ ret = reg_write16(client, REG_OUT_HEIGHT_HIGH, height);
+ /* Total width = output size + blanking */
if (!ret)
- ret = reg_write(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width_high);
+ ret = reg_write16(client, REG_OUT_TOTAL_WIDTH_HIGH, total_width);
if (!ret)
- ret = reg_write(client, REG_OUT_TOTAL_WIDTH_LOW, total_width_low);
+ ret = reg_write16(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height);
+
+ /* Sets the window for AWB calculations */
if (!ret)
- ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_HIGH, total_height_high);
+ ret = reg_write16(client, REG_AVG_WINDOW_END_X_HIGH, width);
if (!ret)
- ret = reg_write(client, REG_OUT_TOTAL_HEIGHT_LOW, total_height_low);
+ ret = reg_write16(client, REG_AVG_WINDOW_END_Y_HIGH, height);
return ret;
}
@@ -744,18 +788,18 @@
static int ov5642_try_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf)
{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct ov5642 *priv = to_ov5642(client);
const struct ov5642_datafmt *fmt = ov5642_find_datafmt(mf->code);
- dev_dbg(sd->v4l2_dev->dev, "%s(%u) width: %u heigth: %u\n",
- __func__, mf->code, mf->width, mf->height);
+ mf->width = priv->crop_rect.width;
+ mf->height = priv->crop_rect.height;
if (!fmt) {
mf->code = ov5642_colour_fmts[0].code;
mf->colorspace = ov5642_colour_fmts[0].colorspace;
}
- mf->width = OV5642_WIDTH;
- mf->height = OV5642_HEIGHT;
mf->field = V4L2_FIELD_NONE;
return 0;
@@ -767,20 +811,13 @@
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov5642 *priv = to_ov5642(client);
- dev_dbg(sd->v4l2_dev->dev, "%s(%u)\n", __func__, mf->code);
-
/* MIPI CSI could have changed the format, double-check */
if (!ov5642_find_datafmt(mf->code))
return -EINVAL;
ov5642_try_fmt(sd, mf);
-
priv->fmt = ov5642_find_datafmt(mf->code);
- ov5642_write_array(client, ov5642_default_regs_init);
- ov5642_set_resolution(client);
- ov5642_write_array(client, ov5642_default_regs_finalise);
-
return 0;
}
@@ -794,8 +831,8 @@
mf->code = fmt->code;
mf->colorspace = fmt->colorspace;
- mf->width = OV5642_WIDTH;
- mf->height = OV5642_HEIGHT;
+ mf->width = priv->crop_rect.width;
+ mf->height = priv->crop_rect.height;
mf->field = V4L2_FIELD_NONE;
return 0;
@@ -828,15 +865,44 @@
return 0;
}
+static int ov5642_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct ov5642 *priv = to_ov5642(client);
+ struct v4l2_rect *rect = &a->c;
+ int ret;
+
+ v4l_bound_align_image(&rect->width, 48, OV5642_MAX_WIDTH, 1,
+ &rect->height, 32, OV5642_MAX_HEIGHT, 1, 0);
+
+ priv->crop_rect.width = rect->width;
+ priv->crop_rect.height = rect->height;
+ priv->total_width = rect->width + BLANKING_EXTRA_WIDTH;
+ priv->total_height = max_t(int, rect->height +
+ BLANKING_EXTRA_HEIGHT,
+ BLANKING_MIN_HEIGHT);
+ priv->crop_rect.width = rect->width;
+ priv->crop_rect.height = rect->height;
+
+ ret = ov5642_write_array(client, ov5642_default_regs_init);
+ if (!ret)
+ ret = ov5642_set_resolution(sd);
+ if (!ret)
+ ret = ov5642_write_array(client, ov5642_default_regs_finalise);
+
+ return ret;
+}
+
static int ov5642_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct ov5642 *priv = to_ov5642(client);
struct v4l2_rect *rect = &a->c;
- a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- rect->top = 0;
- rect->left = 0;
- rect->width = OV5642_WIDTH;
- rect->height = OV5642_HEIGHT;
+ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ return -EINVAL;
+
+ *rect = priv->crop_rect;
return 0;
}
@@ -845,8 +911,8 @@
{
a->bounds.left = 0;
a->bounds.top = 0;
- a->bounds.width = OV5642_WIDTH;
- a->bounds.height = OV5642_HEIGHT;
+ a->bounds.width = OV5642_MAX_WIDTH;
+ a->bounds.height = OV5642_MAX_HEIGHT;
a->defrect = a->bounds;
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->pixelaspect.numerator = 1;
@@ -855,16 +921,47 @@
return 0;
}
+static int ov5642_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ cfg->type = V4L2_MBUS_CSI2;
+ cfg->flags = V4L2_MBUS_CSI2_2_LANE | V4L2_MBUS_CSI2_CHANNEL_0 |
+ V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+
+ return 0;
+}
+
+static int ov5642_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct i2c_client *client;
+ int ret;
+
+ if (!on)
+ return 0;
+
+ client = v4l2_get_subdevdata(sd);
+ ret = ov5642_write_array(client, ov5642_default_regs_init);
+ if (!ret)
+ ret = ov5642_set_resolution(sd);
+ if (!ret)
+ ret = ov5642_write_array(client, ov5642_default_regs_finalise);
+
+ return ret;
+}
+
static struct v4l2_subdev_video_ops ov5642_subdev_video_ops = {
.s_mbus_fmt = ov5642_s_fmt,
.g_mbus_fmt = ov5642_g_fmt,
.try_mbus_fmt = ov5642_try_fmt,
.enum_mbus_fmt = ov5642_enum_fmt,
+ .s_crop = ov5642_s_crop,
.g_crop = ov5642_g_crop,
.cropcap = ov5642_cropcap,
+ .g_mbus_config = ov5642_g_mbus_config,
};
static struct v4l2_subdev_core_ops ov5642_subdev_core_ops = {
+ .s_power = ov5642_s_power,
.g_chip_ident = ov5642_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = ov5642_get_register,
@@ -877,28 +974,7 @@
.video = &ov5642_subdev_video_ops,
};
-/*
- * We have to provide soc-camera operations, but we don't have anything to say
- * there. The MIPI CSI2 driver will provide .query_bus_param and .set_bus_param
- */
-static unsigned long soc_ov5642_query_bus_param(struct soc_camera_device *icd)
-{
- return 0;
-}
-
-static int soc_ov5642_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return -EINVAL;
-}
-
-static struct soc_camera_ops soc_ov5642_ops = {
- .query_bus_param = soc_ov5642_query_bus_param,
- .set_bus_param = soc_ov5642_set_bus_param,
-};
-
-static int ov5642_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int ov5642_video_probe(struct i2c_client *client)
{
int ret;
u8 id_high, id_low;
@@ -929,16 +1005,9 @@
const struct i2c_device_id *did)
{
struct ov5642 *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "OV5642: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "OV5642: missing platform data!\n");
return -EINVAL;
@@ -950,17 +1019,24 @@
v4l2_i2c_subdev_init(&priv->subdev, client, &ov5642_subdev_ops);
- icd->ops = &soc_ov5642_ops;
- priv->fmt = &ov5642_colour_fmts[0];
+ priv->fmt = &ov5642_colour_fmts[0];
- ret = ov5642_video_probe(icd, client);
+ priv->crop_rect.width = OV5642_DEFAULT_WIDTH;
+ priv->crop_rect.height = OV5642_DEFAULT_HEIGHT;
+ priv->crop_rect.left = (OV5642_MAX_WIDTH - OV5642_DEFAULT_WIDTH) / 2;
+ priv->crop_rect.top = (OV5642_MAX_HEIGHT - OV5642_DEFAULT_HEIGHT) / 2;
+ priv->crop_rect.width = OV5642_DEFAULT_WIDTH;
+ priv->crop_rect.height = OV5642_DEFAULT_HEIGHT;
+ priv->total_width = OV5642_DEFAULT_WIDTH + BLANKING_EXTRA_WIDTH;
+ priv->total_height = BLANKING_MIN_HEIGHT;
+
+ ret = ov5642_video_probe(client);
if (ret < 0)
goto error;
return 0;
error:
- icd->ops = NULL;
kfree(priv);
return ret;
}
@@ -968,10 +1044,8 @@
static int ov5642_remove(struct i2c_client *client)
{
struct ov5642 *priv = to_ov5642(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
- icd->ops = NULL;
if (icl->free_bus)
icl->free_bus(icl);
kfree(priv);
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index 456d9ad..d5b0572 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -28,10 +28,11 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
#include <media/soc_camera.h>
#include <media/v4l2-chip-ident.h>
-
+#include <media/v4l2-ctrls.h>
/* Register definitions */
#define REG_GAIN 0x00 /* range 00 - 3F */
@@ -177,20 +178,23 @@
struct ov6650 {
struct v4l2_subdev subdev;
-
- int gain;
- int blue;
- int red;
- int saturation;
- int hue;
- int brightness;
- int exposure;
- int gamma;
- int aec;
- bool vflip;
- bool hflip;
- bool awb;
- bool agc;
+ struct v4l2_ctrl_handler hdl;
+ struct {
+ /* exposure/autoexposure cluster */
+ struct v4l2_ctrl *autoexposure;
+ struct v4l2_ctrl *exposure;
+ };
+ struct {
+ /* gain/autogain cluster */
+ struct v4l2_ctrl *autogain;
+ struct v4l2_ctrl *gain;
+ };
+ struct {
+ /* blue/red/autowhitebalance cluster */
+ struct v4l2_ctrl *autowb;
+ struct v4l2_ctrl *blue;
+ struct v4l2_ctrl *red;
+ };
bool half_scale; /* scale down output by 2 */
struct v4l2_rect rect; /* sensor cropping window */
unsigned long pclk_limit; /* from host */
@@ -210,126 +214,6 @@
V4L2_MBUS_FMT_Y8_1X8,
};
-static const struct v4l2_queryctrl ov6650_controls[] = {
- {
- .id = V4L2_CID_AUTOGAIN,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "AGC",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- },
- {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Gain",
- .minimum = 0,
- .maximum = 0x3f,
- .step = 1,
- .default_value = DEF_GAIN,
- },
- {
- .id = V4L2_CID_AUTO_WHITE_BALANCE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "AWB",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- },
- {
- .id = V4L2_CID_BLUE_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Blue",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = DEF_BLUE,
- },
- {
- .id = V4L2_CID_RED_BALANCE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Red",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = DEF_RED,
- },
- {
- .id = V4L2_CID_SATURATION,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Saturation",
- .minimum = 0,
- .maximum = 0xf,
- .step = 1,
- .default_value = 0x8,
- },
- {
- .id = V4L2_CID_HUE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Hue",
- .minimum = 0,
- .maximum = HUE_MASK,
- .step = 1,
- .default_value = DEF_HUE,
- },
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = 0x80,
- },
- {
- .id = V4L2_CID_EXPOSURE_AUTO,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "AEC",
- .minimum = 0,
- .maximum = 3,
- .step = 1,
- .default_value = 0,
- },
- {
- .id = V4L2_CID_EXPOSURE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Exposure",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = DEF_AECH,
- },
- {
- .id = V4L2_CID_GAMMA,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Gamma",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = 0x12,
- },
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
-};
-
/* read a register */
static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
{
@@ -419,213 +303,90 @@
return 0;
}
-/* Alter bus settings on camera side */
-static int ov6650_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
- int ret;
-
- flags = soc_camera_apply_sensor_flags(icl, flags);
-
- if (flags & SOCAM_PCLK_SAMPLE_RISING)
- ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
- else
- ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
- if (ret)
- return ret;
-
- if (flags & SOCAM_HSYNC_ACTIVE_LOW)
- ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
- else
- ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
- if (ret)
- return ret;
-
- if (flags & SOCAM_VSYNC_ACTIVE_HIGH)
- ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
- else
- ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
-
- return ret;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov6650_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- unsigned long flags = SOCAM_MASTER |
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
/* Get status of additional camera capabilities */
-static int ov6650_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
+ struct v4l2_subdev *sd = &priv->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov6650 *priv = to_ov6650(client);
- uint8_t reg;
- int ret = 0;
+ uint8_t reg, reg2;
+ int ret;
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
- ctrl->value = priv->agc;
- break;
- case V4L2_CID_GAIN:
- if (priv->agc) {
- ret = ov6650_reg_read(client, REG_GAIN, ®);
- ctrl->value = reg;
- } else {
- ctrl->value = priv->gain;
- }
- break;
+ ret = ov6650_reg_read(client, REG_GAIN, ®);
+ if (!ret)
+ priv->gain->val = reg;
+ return ret;
case V4L2_CID_AUTO_WHITE_BALANCE:
- ctrl->value = priv->awb;
- break;
- case V4L2_CID_BLUE_BALANCE:
- if (priv->awb) {
- ret = ov6650_reg_read(client, REG_BLUE, ®);
- ctrl->value = reg;
- } else {
- ctrl->value = priv->blue;
+ ret = ov6650_reg_read(client, REG_BLUE, ®);
+ if (!ret)
+ ret = ov6650_reg_read(client, REG_RED, ®2);
+ if (!ret) {
+ priv->blue->val = reg;
+ priv->red->val = reg2;
}
- break;
- case V4L2_CID_RED_BALANCE:
- if (priv->awb) {
- ret = ov6650_reg_read(client, REG_RED, ®);
- ctrl->value = reg;
- } else {
- ctrl->value = priv->red;
- }
- break;
- case V4L2_CID_SATURATION:
- ctrl->value = priv->saturation;
- break;
- case V4L2_CID_HUE:
- ctrl->value = priv->hue;
- break;
- case V4L2_CID_BRIGHTNESS:
- ctrl->value = priv->brightness;
- break;
+ return ret;
case V4L2_CID_EXPOSURE_AUTO:
- ctrl->value = priv->aec;
- break;
- case V4L2_CID_EXPOSURE:
- if (priv->aec) {
- ret = ov6650_reg_read(client, REG_AECH, ®);
- ctrl->value = reg;
- } else {
- ctrl->value = priv->exposure;
- }
- break;
- case V4L2_CID_GAMMA:
- ctrl->value = priv->gamma;
- break;
- case V4L2_CID_VFLIP:
- ctrl->value = priv->vflip;
- break;
- case V4L2_CID_HFLIP:
- ctrl->value = priv->hflip;
- break;
+ ret = ov6650_reg_read(client, REG_AECH, ®);
+ if (!ret)
+ priv->exposure->val = reg;
+ return ret;
}
- return ret;
+ return -EINVAL;
}
/* Set status of additional camera capabilities */
-static int ov6650_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
+ struct v4l2_subdev *sd = &priv->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov6650 *priv = to_ov6650(client);
- int ret = 0;
+ int ret;
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
ret = ov6650_reg_rmw(client, REG_COMB,
- ctrl->value ? COMB_AGC : 0, COMB_AGC);
- if (!ret)
- priv->agc = ctrl->value;
- break;
- case V4L2_CID_GAIN:
- ret = ov6650_reg_write(client, REG_GAIN, ctrl->value);
- if (!ret)
- priv->gain = ctrl->value;
- break;
+ ctrl->val ? COMB_AGC : 0, COMB_AGC);
+ if (!ret && !ctrl->val)
+ ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val);
+ return ret;
case V4L2_CID_AUTO_WHITE_BALANCE:
ret = ov6650_reg_rmw(client, REG_COMB,
- ctrl->value ? COMB_AWB : 0, COMB_AWB);
- if (!ret)
- priv->awb = ctrl->value;
- break;
- case V4L2_CID_BLUE_BALANCE:
- ret = ov6650_reg_write(client, REG_BLUE, ctrl->value);
- if (!ret)
- priv->blue = ctrl->value;
- break;
- case V4L2_CID_RED_BALANCE:
- ret = ov6650_reg_write(client, REG_RED, ctrl->value);
- if (!ret)
- priv->red = ctrl->value;
- break;
- case V4L2_CID_SATURATION:
- ret = ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->value),
- SAT_MASK);
- if (!ret)
- priv->saturation = ctrl->value;
- break;
- case V4L2_CID_HUE:
- ret = ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->value),
- HUE_MASK);
- if (!ret)
- priv->hue = ctrl->value;
- break;
- case V4L2_CID_BRIGHTNESS:
- ret = ov6650_reg_write(client, REG_BRT, ctrl->value);
- if (!ret)
- priv->brightness = ctrl->value;
- break;
- case V4L2_CID_EXPOSURE_AUTO:
- switch (ctrl->value) {
- case V4L2_EXPOSURE_AUTO:
- ret = ov6650_reg_rmw(client, REG_COMB, COMB_AEC, 0);
- break;
- default:
- ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_AEC);
- break;
+ ctrl->val ? COMB_AWB : 0, COMB_AWB);
+ if (!ret && !ctrl->val) {
+ ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val);
+ if (!ret)
+ ret = ov6650_reg_write(client, REG_RED,
+ priv->red->val);
}
- if (!ret)
- priv->aec = ctrl->value;
- break;
- case V4L2_CID_EXPOSURE:
- ret = ov6650_reg_write(client, REG_AECH, ctrl->value);
- if (!ret)
- priv->exposure = ctrl->value;
- break;
+ return ret;
+ case V4L2_CID_SATURATION:
+ return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val),
+ SAT_MASK);
+ case V4L2_CID_HUE:
+ return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val),
+ HUE_MASK);
+ case V4L2_CID_BRIGHTNESS:
+ return ov6650_reg_write(client, REG_BRT, ctrl->val);
+ case V4L2_CID_EXPOSURE_AUTO:
+ ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val ==
+ V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC);
+ if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL)
+ ret = ov6650_reg_write(client, REG_AECH,
+ priv->exposure->val);
+ return ret;
case V4L2_CID_GAMMA:
- ret = ov6650_reg_write(client, REG_GAM1, ctrl->value);
- if (!ret)
- priv->gamma = ctrl->value;
- break;
+ return ov6650_reg_write(client, REG_GAM1, ctrl->val);
case V4L2_CID_VFLIP:
- ret = ov6650_reg_rmw(client, REG_COMB,
- ctrl->value ? COMB_FLIP_V : 0, COMB_FLIP_V);
- if (!ret)
- priv->vflip = ctrl->value;
- break;
+ return ov6650_reg_rmw(client, REG_COMB,
+ ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V);
case V4L2_CID_HFLIP:
- ret = ov6650_reg_rmw(client, REG_COMB,
- ctrl->value ? COMB_FLIP_H : 0, COMB_FLIP_H);
- if (!ret)
- priv->hflip = ctrl->value;
- break;
+ return ov6650_reg_rmw(client, REG_COMB,
+ ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H);
}
- return ret;
+ return -EINVAL;
}
/* Get chip identification */
@@ -778,7 +539,7 @@
static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
struct soc_camera_sense *sense = icd->sense;
struct ov6650 *priv = to_ov6650(client);
bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
@@ -1057,8 +818,7 @@
return ret;
}
-static int ov6650_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int ov6650_video_probe(struct i2c_client *client)
{
u8 pidh, pidl, midh, midl;
int ret = 0;
@@ -1094,16 +854,12 @@
return ret;
}
-static struct soc_camera_ops ov6650_ops = {
- .set_bus_param = ov6650_set_bus_param,
- .query_bus_param = ov6650_query_bus_param,
- .controls = ov6650_controls,
- .num_controls = ARRAY_SIZE(ov6650_controls),
+static const struct v4l2_ctrl_ops ov6550_ctrl_ops = {
+ .g_volatile_ctrl = ov6550_g_volatile_ctrl,
+ .s_ctrl = ov6550_s_ctrl,
};
static struct v4l2_subdev_core_ops ov6650_core_ops = {
- .g_ctrl = ov6650_g_ctrl,
- .s_ctrl = ov6650_s_ctrl,
.g_chip_ident = ov6650_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = ov6650_get_register,
@@ -1111,6 +867,55 @@
#endif
};
+/* Request bus settings on camera side */
+static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_MASTER |
+ V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
+/* Alter bus settings on camera side */
+static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+ int ret;
+
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+ ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
+ else
+ ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
+ if (ret)
+ return ret;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+ ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
+ else
+ ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
+ if (ret)
+ return ret;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
+ else
+ ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
+
+ return ret;
+}
+
static struct v4l2_subdev_video_ops ov6650_video_ops = {
.s_stream = ov6650_s_stream,
.g_mbus_fmt = ov6650_g_fmt,
@@ -1122,6 +927,8 @@
.s_crop = ov6650_s_crop,
.g_parm = ov6650_g_parm,
.s_parm = ov6650_s_parm,
+ .g_mbus_config = ov6650_g_mbus_config,
+ .s_mbus_config = ov6650_s_mbus_config,
};
static struct v4l2_subdev_ops ov6650_subdev_ops = {
@@ -1136,16 +943,9 @@
const struct i2c_device_id *did)
{
struct ov6650 *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "Missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "Missing platform_data for driver\n");
return -EINVAL;
@@ -1159,8 +959,46 @@
}
v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops);
+ v4l2_ctrl_handler_init(&priv->hdl, 13);
+ v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+ priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN);
+ priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+ priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE);
+ priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED);
+ v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 0xf, 1, 0x8);
+ v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE);
+ v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80);
+ priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl,
+ &ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
+ V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
+ priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH);
+ v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
+ V4L2_CID_GAMMA, 0, 0xff, 1, 0x12);
- icd->ops = &ov6650_ops;
+ priv->subdev.ctrl_handler = &priv->hdl;
+ if (priv->hdl.error) {
+ int err = priv->hdl.error;
+
+ kfree(priv);
+ return err;
+ }
+ v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true);
+ v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true);
+ v4l2_ctrl_auto_cluster(2, &priv->autoexposure,
+ V4L2_EXPOSURE_MANUAL, true);
priv->rect.left = DEF_HSTRT << 1;
priv->rect.top = DEF_VSTRT << 1;
@@ -1170,10 +1008,12 @@
priv->code = V4L2_MBUS_FMT_YUYV8_2X8;
priv->colorspace = V4L2_COLORSPACE_JPEG;
- ret = ov6650_video_probe(icd, client);
+ ret = ov6650_video_probe(client);
+ if (!ret)
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
}
@@ -1184,6 +1024,8 @@
{
struct ov6650 *priv = to_ov6650(client);
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index 397870f..9f6ce3d 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -20,12 +20,14 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
+
+#include <media/ov772x.h>
+#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-subdev.h>
-#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
-#include <media/ov772x.h>
/*
* register offset
@@ -400,6 +402,7 @@
struct ov772x_priv {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
struct ov772x_camera_info *info;
const struct ov772x_color_format *cfmt;
const struct ov772x_win_size *win;
@@ -517,36 +520,6 @@
.regs = ov772x_qvga_regs,
};
-static const struct v4l2_queryctrl ov772x_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- {
- .id = V4L2_CID_BAND_STOP_FILTER,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Band-stop filter",
- .minimum = 0,
- .maximum = 256,
- .step = 1,
- .default_value = 0,
- },
-};
-
/*
* general function
*/
@@ -620,75 +593,30 @@
return 0;
}
-static int ov772x_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
+static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
{
- return 0;
-}
-
-static unsigned long ov772x_query_bus_param(struct soc_camera_device *icd)
-{
- struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
- struct ov772x_priv *priv = i2c_get_clientdata(client);
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH;
-
- if (priv->info->flags & OV772X_FLAG_8BIT)
- flags |= SOCAM_DATAWIDTH_8;
- else
- flags |= SOCAM_DATAWIDTH_10;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- ctrl->value = priv->flag_vflip;
- break;
- case V4L2_CID_HFLIP:
- ctrl->value = priv->flag_hflip;
- break;
- case V4L2_CID_BAND_STOP_FILTER:
- ctrl->value = priv->band_filter;
- break;
- }
- return 0;
-}
-
-static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
+ struct ov772x_priv *priv = container_of(ctrl->handler,
+ struct ov772x_priv, hdl);
+ struct v4l2_subdev *sd = &priv->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
int ret = 0;
u8 val;
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- val = ctrl->value ? VFLIP_IMG : 0x00;
- priv->flag_vflip = ctrl->value;
+ val = ctrl->val ? VFLIP_IMG : 0x00;
+ priv->flag_vflip = ctrl->val;
if (priv->info->flags & OV772X_FLAG_VFLIP)
val ^= VFLIP_IMG;
- ret = ov772x_mask_set(client, COM3, VFLIP_IMG, val);
- break;
+ return ov772x_mask_set(client, COM3, VFLIP_IMG, val);
case V4L2_CID_HFLIP:
- val = ctrl->value ? HFLIP_IMG : 0x00;
- priv->flag_hflip = ctrl->value;
+ val = ctrl->val ? HFLIP_IMG : 0x00;
+ priv->flag_hflip = ctrl->val;
if (priv->info->flags & OV772X_FLAG_HFLIP)
val ^= HFLIP_IMG;
- ret = ov772x_mask_set(client, COM3, HFLIP_IMG, val);
- break;
+ return ov772x_mask_set(client, COM3, HFLIP_IMG, val);
case V4L2_CID_BAND_STOP_FILTER:
- if ((unsigned)ctrl->value > 256)
- ctrl->value = 256;
- if (ctrl->value == priv->band_filter)
- break;
- if (!ctrl->value) {
+ if (!ctrl->val) {
/* Switch the filter off, it is on now */
ret = ov772x_mask_set(client, BDBASE, 0xff, 0xff);
if (!ret)
@@ -696,7 +624,7 @@
BNDF_ON_OFF, 0);
} else {
/* Switch the filter on, set AEC low limit */
- val = 256 - ctrl->value;
+ val = 256 - ctrl->val;
ret = ov772x_mask_set(client, COM8,
BNDF_ON_OFF, BNDF_ON_OFF);
if (!ret)
@@ -704,11 +632,11 @@
0xff, val);
}
if (!ret)
- priv->band_filter = ctrl->value;
- break;
+ priv->band_filter = ctrl->val;
+ return ret;
}
- return ret;
+ return -EINVAL;
}
static int ov772x_g_chip_ident(struct v4l2_subdev *sd,
@@ -822,13 +750,13 @@
goto ov772x_set_fmt_error;
ret = ov772x_mask_set(client,
- EDGE_TRSHLD, EDGE_THRESHOLD_MASK,
+ EDGE_TRSHLD, OV772X_EDGE_THRESHOLD_MASK,
priv->info->edgectrl.threshold);
if (ret < 0)
goto ov772x_set_fmt_error;
ret = ov772x_mask_set(client,
- EDGE_STRNGT, EDGE_STRENGTH_MASK,
+ EDGE_STRNGT, OV772X_EDGE_STRENGTH_MASK,
priv->info->edgectrl.strength);
if (ret < 0)
goto ov772x_set_fmt_error;
@@ -840,13 +768,13 @@
* set upper and lower limit
*/
ret = ov772x_mask_set(client,
- EDGE_UPPER, EDGE_UPPER_MASK,
+ EDGE_UPPER, OV772X_EDGE_UPPER_MASK,
priv->info->edgectrl.upper);
if (ret < 0)
goto ov772x_set_fmt_error;
ret = ov772x_mask_set(client,
- EDGE_LOWER, EDGE_LOWER_MASK,
+ EDGE_LOWER, OV772X_EDGE_LOWER_MASK,
priv->info->edgectrl.lower);
if (ret < 0)
goto ov772x_set_fmt_error;
@@ -1025,17 +953,12 @@
return 0;
}
-static int ov772x_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int ov772x_video_probe(struct i2c_client *client)
{
struct ov772x_priv *priv = to_ov772x(client);
u8 pid, ver;
const char *devname;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/*
* check and show product ID and manufacturer ID
*/
@@ -1064,20 +987,14 @@
ver,
i2c_smbus_read_byte_data(client, MIDH),
i2c_smbus_read_byte_data(client, MIDL));
-
- return 0;
+ return v4l2_ctrl_handler_setup(&priv->hdl);
}
-static struct soc_camera_ops ov772x_ops = {
- .set_bus_param = ov772x_set_bus_param,
- .query_bus_param = ov772x_query_bus_param,
- .controls = ov772x_controls,
- .num_controls = ARRAY_SIZE(ov772x_controls),
+static const struct v4l2_ctrl_ops ov772x_ctrl_ops = {
+ .s_ctrl = ov772x_s_ctrl,
};
static struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
- .g_ctrl = ov772x_g_ctrl,
- .s_ctrl = ov772x_s_ctrl,
.g_chip_ident = ov772x_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = ov772x_g_register,
@@ -1095,6 +1012,21 @@
return 0;
}
+static int ov772x_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
static struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
.s_stream = ov772x_s_stream,
.g_mbus_fmt = ov772x_g_fmt,
@@ -1103,6 +1035,7 @@
.cropcap = ov772x_cropcap,
.g_crop = ov772x_g_crop,
.enum_mbus_fmt = ov772x_enum_fmt,
+ .g_mbus_config = ov772x_g_mbus_config,
};
static struct v4l2_subdev_ops ov772x_subdev_ops = {
@@ -1117,21 +1050,16 @@
static int ov772x_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
- struct ov772x_priv *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
- int ret;
+ struct ov772x_priv *priv;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ int ret;
- if (!icd) {
- dev_err(&client->dev, "OV772X: missing soc-camera data!\n");
+ if (!icl || !icl->priv) {
+ dev_err(&client->dev, "OV772X: missing platform data!\n");
return -EINVAL;
}
- icl = to_soc_camera_link(icd);
- if (!icl || !icl->priv)
- return -EINVAL;
-
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&adapter->dev,
"I2C-Adapter doesn't support "
@@ -1146,12 +1074,24 @@
priv->info = icl->priv;
v4l2_i2c_subdev_init(&priv->subdev, client, &ov772x_subdev_ops);
+ v4l2_ctrl_handler_init(&priv->hdl, 3);
+ v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov772x_ctrl_ops,
+ V4L2_CID_BAND_STOP_FILTER, 0, 256, 1, 0);
+ priv->subdev.ctrl_handler = &priv->hdl;
+ if (priv->hdl.error) {
+ int err = priv->hdl.error;
- icd->ops = &ov772x_ops;
+ kfree(priv);
+ return err;
+ }
- ret = ov772x_video_probe(icd, client);
+ ret = ov772x_video_probe(client);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
}
@@ -1161,9 +1101,9 @@
static int ov772x_remove(struct i2c_client *client)
{
struct ov772x_priv *priv = to_ov772x(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- icd->ops = NULL;
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 3681a6f..a4f9979 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -24,10 +24,13 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-common.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
#include "ov9640.h"
@@ -162,27 +165,6 @@
V4L2_MBUS_FMT_RGB565_2X8_LE,
};
-static const struct v4l2_queryctrl ov9640_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
-};
-
/* read a register */
static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
{
@@ -284,75 +266,25 @@
return 0;
}
-/* Alter bus settings on camera side */
-static int ov9640_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return 0;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- /*
- * REVISIT: the camera probably can do 10 bit transfers, but I don't
- * have those pins connected on my hardware.
- */
- unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-/* Get status of additional camera capabilities */
-static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct ov9640_priv *priv = to_ov9640_sensor(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- ctrl->value = priv->flag_vflip;
- break;
- case V4L2_CID_HFLIP:
- ctrl->value = priv->flag_hflip;
- break;
- }
- return 0;
-}
-
/* Set status of additional camera capabilities */
-static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov9640_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov9640_priv *priv = to_ov9640_sensor(sd);
-
- int ret = 0;
+ struct ov9640_priv *priv = container_of(ctrl->handler, struct ov9640_priv, hdl);
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- priv->flag_vflip = ctrl->value;
- if (ctrl->value)
- ret = ov9640_reg_rmw(client, OV9640_MVFP,
+ if (ctrl->val)
+ return ov9640_reg_rmw(client, OV9640_MVFP,
OV9640_MVFP_V, 0);
- else
- ret = ov9640_reg_rmw(client, OV9640_MVFP,
- 0, OV9640_MVFP_V);
- break;
+ return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_V);
case V4L2_CID_HFLIP:
- priv->flag_hflip = ctrl->value;
- if (ctrl->value)
- ret = ov9640_reg_rmw(client, OV9640_MVFP,
+ if (ctrl->val)
+ return ov9640_reg_rmw(client, OV9640_MVFP,
OV9640_MVFP_H, 0);
- else
- ret = ov9640_reg_rmw(client, OV9640_MVFP,
- 0, OV9640_MVFP_H);
- break;
+ return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_H);
}
-
- return ret;
+ return -EINVAL;
}
/* Get chip identification */
@@ -646,10 +578,7 @@
return 0;
}
-
-
-static int ov9640_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int ov9640_video_probe(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov9640_priv *priv = to_ov9640_sensor(sd);
@@ -657,29 +586,19 @@
const char *devname;
int ret = 0;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/*
* check and show product ID and manufacturer ID
*/
ret = ov9640_reg_read(client, OV9640_PID, &pid);
+ if (!ret)
+ ret = ov9640_reg_read(client, OV9640_VER, &ver);
+ if (!ret)
+ ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
+ if (!ret)
+ ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
if (ret)
- goto err;
-
- ret = ov9640_reg_read(client, OV9640_VER, &ver);
- if (ret)
- goto err;
-
- ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
- if (ret)
- goto err;
-
- ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
- if (ret)
- goto err;
+ return ret;
switch (VERSION(pid, ver)) {
case OV9640_V2:
@@ -693,27 +612,20 @@
break;
default:
dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
- ret = -ENODEV;
- goto err;
+ return -ENODEV;
}
dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
devname, pid, ver, midh, midl);
-err:
- return ret;
+ return v4l2_ctrl_handler_setup(&priv->hdl);
}
-static struct soc_camera_ops ov9640_ops = {
- .set_bus_param = ov9640_set_bus_param,
- .query_bus_param = ov9640_query_bus_param,
- .controls = ov9640_controls,
- .num_controls = ARRAY_SIZE(ov9640_controls),
+static const struct v4l2_ctrl_ops ov9640_ctrl_ops = {
+ .s_ctrl = ov9640_s_ctrl,
};
static struct v4l2_subdev_core_ops ov9640_core_ops = {
- .g_ctrl = ov9640_g_ctrl,
- .s_ctrl = ov9640_s_ctrl,
.g_chip_ident = ov9640_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = ov9640_get_register,
@@ -722,6 +634,22 @@
};
+/* Request bus settings on camera side */
+static int ov9640_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
static struct v4l2_subdev_video_ops ov9640_video_ops = {
.s_stream = ov9640_s_stream,
.s_mbus_fmt = ov9640_s_fmt,
@@ -729,7 +657,7 @@
.enum_mbus_fmt = ov9640_enum_fmt,
.cropcap = ov9640_cropcap,
.g_crop = ov9640_g_crop,
-
+ .g_mbus_config = ov9640_g_mbus_config,
};
static struct v4l2_subdev_ops ov9640_subdev_ops = {
@@ -744,16 +672,9 @@
const struct i2c_device_id *did)
{
struct ov9640_priv *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "Missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "Missing platform_data for driver\n");
return -EINVAL;
@@ -768,12 +689,23 @@
v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
- icd->ops = &ov9640_ops;
+ v4l2_ctrl_handler_init(&priv->hdl, 2);
+ v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ priv->subdev.ctrl_handler = &priv->hdl;
+ if (priv->hdl.error) {
+ int err = priv->hdl.error;
- ret = ov9640_video_probe(icd, client);
+ kfree(priv);
+ return err;
+ }
+
+ ret = ov9640_video_probe(client);
if (ret) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
}
@@ -785,6 +717,8 @@
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov9640_priv *priv = to_ov9640_sensor(sd);
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/ov9640.h b/drivers/media/video/ov9640.h
index f8a51b7..6b33a97 100644
--- a/drivers/media/video/ov9640.h
+++ b/drivers/media/video/ov9640.h
@@ -198,12 +198,10 @@
struct ov9640_priv {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
int model;
int revision;
-
- bool flag_vflip;
- bool flag_hflip;
};
#endif /* __DRIVERS_MEDIA_VIDEO_OV9640_H__ */
diff --git a/drivers/media/video/ov9740.c b/drivers/media/video/ov9740.c
index edd1ffc..d9a9f71 100644
--- a/drivers/media/video/ov9740.c
+++ b/drivers/media/video/ov9740.c
@@ -14,8 +14,11 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/slab.h>
-#include <media/v4l2-chip-ident.h>
+#include <linux/v4l2-mediabus.h>
+
#include <media/soc_camera.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#define to_ov9740(sd) container_of(sd, struct ov9740_priv, subdev)
@@ -192,6 +195,7 @@
struct ov9740_priv {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
int ident;
u16 model;
@@ -392,27 +396,6 @@
V4L2_MBUS_FMT_YUYV8_2X8,
};
-static const struct v4l2_queryctrl ov9740_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
- {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
-};
-
/* read a register */
static int ov9740_reg_read(struct i2c_client *client, u16 reg, u8 *val)
{
@@ -560,25 +543,6 @@
return ret;
}
-/* Alter bus settings on camera side */
-static int ov9740_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return 0;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
-
- unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
/* select nearest higher resolution for capture */
static void ov9740_res_roundup(u32 *width, u32 *height)
{
@@ -788,36 +752,18 @@
return 0;
}
-/* Get status of additional camera capabilities */
-static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct ov9740_priv *priv = to_ov9740(sd);
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- ctrl->value = priv->flag_vflip;
- break;
- case V4L2_CID_HFLIP:
- ctrl->value = priv->flag_hflip;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
/* Set status of additional camera capabilities */
-static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov9740_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct ov9740_priv *priv = to_ov9740(sd);
+ struct ov9740_priv *priv =
+ container_of(ctrl->handler, struct ov9740_priv, hdl);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- priv->flag_vflip = ctrl->value;
+ priv->flag_vflip = ctrl->val;
break;
case V4L2_CID_HFLIP:
- priv->flag_hflip = ctrl->value;
+ priv->flag_hflip = ctrl->val;
break;
default:
return -EINVAL;
@@ -890,18 +836,13 @@
}
#endif
-static int ov9740_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int ov9740_video_probe(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov9740_priv *priv = to_ov9740(sd);
u8 modelhi, modello;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/*
* check and show product ID and manufacturer ID
*/
@@ -942,25 +883,33 @@
return ret;
}
-static struct soc_camera_ops ov9740_ops = {
- .set_bus_param = ov9740_set_bus_param,
- .query_bus_param = ov9740_query_bus_param,
- .controls = ov9740_controls,
- .num_controls = ARRAY_SIZE(ov9740_controls),
-};
+/* Request bus settings on camera side */
+static int ov9740_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
static struct v4l2_subdev_video_ops ov9740_video_ops = {
- .s_stream = ov9740_s_stream,
- .s_mbus_fmt = ov9740_s_fmt,
- .try_mbus_fmt = ov9740_try_fmt,
- .enum_mbus_fmt = ov9740_enum_fmt,
- .cropcap = ov9740_cropcap,
- .g_crop = ov9740_g_crop,
+ .s_stream = ov9740_s_stream,
+ .s_mbus_fmt = ov9740_s_fmt,
+ .try_mbus_fmt = ov9740_try_fmt,
+ .enum_mbus_fmt = ov9740_enum_fmt,
+ .cropcap = ov9740_cropcap,
+ .g_crop = ov9740_g_crop,
+ .g_mbus_config = ov9740_g_mbus_config,
};
static struct v4l2_subdev_core_ops ov9740_core_ops = {
- .g_ctrl = ov9740_g_ctrl,
- .s_ctrl = ov9740_s_ctrl,
.g_chip_ident = ov9740_g_chip_ident,
.s_power = ov9740_s_power,
#ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -974,6 +923,10 @@
.video = &ov9740_video_ops,
};
+static const struct v4l2_ctrl_ops ov9740_ctrl_ops = {
+ .s_ctrl = ov9740_s_ctrl,
+};
+
/*
* i2c_driver function
*/
@@ -981,16 +934,9 @@
const struct i2c_device_id *did)
{
struct ov9740_priv *priv;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
int ret;
- if (!icd) {
- dev_err(&client->dev, "Missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl) {
dev_err(&client->dev, "Missing platform_data for driver\n");
return -EINVAL;
@@ -1003,12 +949,24 @@
}
v4l2_i2c_subdev_init(&priv->subdev, client, &ov9740_subdev_ops);
+ v4l2_ctrl_handler_init(&priv->hdl, 13);
+ v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&priv->hdl, &ov9740_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ priv->subdev.ctrl_handler = &priv->hdl;
+ if (priv->hdl.error) {
+ int err = priv->hdl.error;
- icd->ops = &ov9740_ops;
+ kfree(priv);
+ return err;
+ }
- ret = ov9740_video_probe(icd, client);
+ ret = ov9740_video_probe(client);
+ if (!ret)
+ ret = v4l2_ctrl_handler_setup(&priv->hdl);
if (ret < 0) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
}
@@ -1019,8 +977,9 @@
{
struct ov9740_priv *priv = i2c_get_clientdata(client);
+ v4l2_device_unregister_subdev(&priv->subdev);
+ v4l2_ctrl_handler_free(&priv->hdl);
kfree(priv);
-
return 0;
}
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index 360be22..01ff643 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -744,9 +744,9 @@
/***************************************************************************/
/* Videobuf2 operations */
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned int sizes[],
- void *alloc_ctxs[])
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
{
struct pwc_device *pdev = vb2_get_drv_priv(vq);
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index d07df22..79fb22c 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -214,6 +214,7 @@
unsigned long ciclk;
unsigned long mclk;
u32 mclk_divisor;
+ u16 width_flags; /* max 10 bits */
struct list_head capture;
@@ -1020,37 +1021,20 @@
* quick capture interface supports both.
*/
*flags = (pcdev->platform_flags & PXA_CAMERA_MASTER ?
- SOCAM_MASTER : SOCAM_SLAVE) |
- SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH |
- SOCAM_PCLK_SAMPLE_RISING |
- SOCAM_PCLK_SAMPLE_FALLING;
+ V4L2_MBUS_MASTER : V4L2_MBUS_SLAVE) |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_HSYNC_ACTIVE_LOW |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW |
+ V4L2_MBUS_DATA_ACTIVE_HIGH |
+ V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_PCLK_SAMPLE_FALLING;
/* If requested data width is supported by the platform, use it */
- switch (buswidth) {
- case 10:
- if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_10))
- return -EINVAL;
- *flags |= SOCAM_DATAWIDTH_10;
- break;
- case 9:
- if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_9))
- return -EINVAL;
- *flags |= SOCAM_DATAWIDTH_9;
- break;
- case 8:
- if (!(pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8))
- return -EINVAL;
- *flags |= SOCAM_DATAWIDTH_8;
- break;
- default:
- return -EINVAL;
- }
+ if ((1 << (buswidth - 1)) & pcdev->width_flags)
+ return 0;
- return 0;
+ return -EINVAL;
}
static void pxa_camera_setup_cicr(struct soc_camera_device *icd,
@@ -1070,12 +1054,12 @@
* Datawidth is now guaranteed to be equal to one of the three values.
* We fix bit-per-pixel equal to data-width...
*/
- switch (flags & SOCAM_DATAWIDTH_MASK) {
- case SOCAM_DATAWIDTH_10:
+ switch (icd->current_fmt->host_fmt->bits_per_sample) {
+ case 10:
dw = 4;
bpp = 0x40;
break;
- case SOCAM_DATAWIDTH_9:
+ case 9:
dw = 3;
bpp = 0x20;
break;
@@ -1084,7 +1068,7 @@
* Actually it can only be 8 now,
* default is just to silence compiler warnings
*/
- case SOCAM_DATAWIDTH_8:
+ case 8:
dw = 2;
bpp = 0;
}
@@ -1093,11 +1077,11 @@
cicr4 |= CICR4_PCLK_EN;
if (pcdev->platform_flags & PXA_CAMERA_MCLK_EN)
cicr4 |= CICR4_MCLK_EN;
- if (flags & SOCAM_PCLK_SAMPLE_FALLING)
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
cicr4 |= CICR4_PCP;
- if (flags & SOCAM_HSYNC_ACTIVE_LOW)
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
cicr4 |= CICR4_HSP;
- if (flags & SOCAM_VSYNC_ACTIVE_LOW)
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
cicr4 |= CICR4_VSP;
cicr0 = __raw_readl(pcdev->base + CICR0);
@@ -1151,9 +1135,11 @@
static int pxa_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct pxa_camera_dev *pcdev = ici->priv;
- unsigned long bus_flags, camera_flags, common_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long bus_flags, common_flags;
int ret;
struct pxa_cam *cam = icd->host_priv;
@@ -1162,45 +1148,59 @@
if (ret < 0)
return ret;
- camera_flags = icd->ops->query_bus_param(icd);
-
- common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags);
- if (!common_flags)
- return -EINVAL;
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg,
+ bus_flags);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%lx\n",
+ cfg.flags, bus_flags);
+ return -EINVAL;
+ }
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ } else {
+ common_flags = bus_flags;
+ }
pcdev->channels = 1;
/* Make choises, based on platform preferences */
- if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
if (pcdev->platform_flags & PXA_CAMERA_HSP)
- common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
if (pcdev->platform_flags & PXA_CAMERA_VSP)
- common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
- (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
+ if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
+ (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
if (pcdev->platform_flags & PXA_CAMERA_PCP)
- common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
else
- common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
+ common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
+ }
+
+ cfg.flags = common_flags;
+ ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
+ common_flags, ret);
+ return ret;
}
cam->flags = common_flags;
- ret = icd->ops->set_bus_param(icd, common_flags);
- if (ret < 0)
- return ret;
-
pxa_camera_setup_cicr(icd, common_flags, pixfmt);
return 0;
@@ -1209,17 +1209,31 @@
static int pxa_camera_try_bus_param(struct soc_camera_device *icd,
unsigned char buswidth)
{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct pxa_camera_dev *pcdev = ici->priv;
- unsigned long bus_flags, camera_flags;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long bus_flags, common_flags;
int ret = test_platform_param(pcdev, buswidth, &bus_flags);
if (ret < 0)
return ret;
- camera_flags = icd->ops->query_bus_param(icd);
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg,
+ bus_flags);
+ if (!common_flags) {
+ dev_warn(icd->parent,
+ "Flags incompatible: camera 0x%x, host 0x%lx\n",
+ cfg.flags, bus_flags);
+ return -EINVAL;
+ }
+ } else if (ret == -ENOIOCTLCMD) {
+ ret = 0;
+ }
- return soc_camera_bus_param_compatible(camera_flags, bus_flags) ? 0 : -EINVAL;
+ return ret;
}
static const struct soc_mbus_pixelfmt pxa_camera_formats[] = {
@@ -1687,6 +1701,12 @@
"data widths, using default 10 bit\n");
pcdev->platform_flags |= PXA_CAMERA_DATAWIDTH_10;
}
+ if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_8)
+ pcdev->width_flags = 1 << 7;
+ if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_9)
+ pcdev->width_flags |= 1 << 8;
+ if (pcdev->platform_flags & PXA_CAMERA_DATAWIDTH_10)
+ pcdev->width_flags |= 1 << 9;
pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
if (!pcdev->mclk) {
dev_warn(&pdev->dev,
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index 847ccc0..6afc616 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -11,13 +11,14 @@
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/slab.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
#include <media/rj54n1cb0c.h>
#include <media/soc_camera.h>
-#include <media/soc_mediabus.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#define RJ54N1_DEV_CODE 0x0400
#define RJ54N1_DEV_CODE2 0x0401
@@ -148,6 +149,7 @@
struct rj54n1 {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
struct rj54n1_clock_div clk_div;
const struct rj54n1_datafmt *fmt;
struct v4l2_rect rect; /* Sensor window */
@@ -499,31 +501,6 @@
return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80);
}
-static int rj54n1_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- /* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
-
- if (flags & SOCAM_PCLK_SAMPLE_RISING)
- return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
- else
- return reg_write(client, RJ54N1_OUT_SIGPO, 0);
-}
-
-static unsigned long rj54n1_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- const unsigned long flags =
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
static int rj54n1_set_rect(struct i2c_client *client,
u16 reg_x, u16 reg_y, u16 reg_xy,
u32 width, u32 height)
@@ -1202,134 +1179,51 @@
}
#endif
-static const struct v4l2_queryctrl rj54n1_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Gain",
- .minimum = 0,
- .maximum = 127,
- .step = 1,
- .default_value = 66,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_AUTO_WHITE_BALANCE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Auto white balance",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- },
-};
-
-static struct soc_camera_ops rj54n1_ops = {
- .set_bus_param = rj54n1_set_bus_param,
- .query_bus_param = rj54n1_query_bus_param,
- .controls = rj54n1_controls,
- .num_controls = ARRAY_SIZE(rj54n1_controls),
-};
-
-static int rj54n1_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int rj54n1_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct rj54n1 *rj54n1 = container_of(ctrl->handler, struct rj54n1, hdl);
+ struct v4l2_subdev *sd = &rj54n1->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct rj54n1 *rj54n1 = to_rj54n1(client);
int data;
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !(data & 1);
- break;
- case V4L2_CID_HFLIP:
- data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !(data & 2);
- break;
- case V4L2_CID_GAIN:
- data = reg_read(client, RJ54N1_Y_GAIN);
- if (data < 0)
- return -EIO;
-
- ctrl->value = data / 2;
- break;
- case V4L2_CID_AUTO_WHITE_BALANCE:
- ctrl->value = rj54n1->auto_wb;
- break;
- }
-
- return 0;
-}
-
-static int rj54n1_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- int data;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct rj54n1 *rj54n1 = to_rj54n1(client);
- const struct v4l2_queryctrl *qctrl;
-
- qctrl = soc_camera_find_qctrl(&rj54n1_ops, ctrl->id);
- if (!qctrl)
- return -EINVAL;
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 1);
else
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 1, 1);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_HFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 2);
else
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 2, 2);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_GAIN:
- if (ctrl->value > qctrl->maximum ||
- ctrl->value < qctrl->minimum)
- return -EINVAL;
- else if (reg_write(client, RJ54N1_Y_GAIN, ctrl->value * 2) < 0)
+ if (reg_write(client, RJ54N1_Y_GAIN, ctrl->val * 2) < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_AUTO_WHITE_BALANCE:
/* Auto WB area - whole image */
- if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->value << 7,
+ if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->val << 7,
0x80) < 0)
return -EIO;
- rj54n1->auto_wb = ctrl->value;
- break;
+ rj54n1->auto_wb = ctrl->val;
+ return 0;
}
- return 0;
+ return -EINVAL;
}
+static const struct v4l2_ctrl_ops rj54n1_ctrl_ops = {
+ .s_ctrl = rj54n1_s_ctrl,
+};
+
static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = {
- .g_ctrl = rj54n1_g_ctrl,
- .s_ctrl = rj54n1_s_ctrl,
.g_chip_ident = rj54n1_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = rj54n1_g_register,
@@ -1337,6 +1231,36 @@
#endif
};
+static int rj54n1_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags =
+ V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
+static int rj54n1_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ /* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
+ if (soc_camera_apply_board_flags(icl, cfg) &
+ V4L2_MBUS_PCLK_SAMPLE_RISING)
+ return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
+ else
+ return reg_write(client, RJ54N1_OUT_SIGPO, 0);
+}
+
static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = {
.s_stream = rj54n1_s_stream,
.s_mbus_fmt = rj54n1_s_fmt,
@@ -1346,6 +1270,8 @@
.g_crop = rj54n1_g_crop,
.s_crop = rj54n1_s_crop,
.cropcap = rj54n1_cropcap,
+ .g_mbus_config = rj54n1_g_mbus_config,
+ .s_mbus_config = rj54n1_s_mbus_config,
};
static struct v4l2_subdev_ops rj54n1_subdev_ops = {
@@ -1357,17 +1283,12 @@
* Interface active, can use i2c. If it fails, it can indeed mean, that
* this wasn't our capture interface, so, we wait for the right one
*/
-static int rj54n1_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client,
+static int rj54n1_video_probe(struct i2c_client *client,
struct rj54n1_pdata *priv)
{
int data1, data2;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/* Read out the chip version register */
data1 = reg_read(client, RJ54N1_DEV_CODE);
data2 = reg_read(client, RJ54N1_DEV_CODE2);
@@ -1395,18 +1316,11 @@
const struct i2c_device_id *did)
{
struct rj54n1 *rj54n1;
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
struct rj54n1_pdata *rj54n1_priv;
int ret;
- if (!icd) {
- dev_err(&client->dev, "RJ54N1CB0C: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl || !icl->priv) {
dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
return -EINVAL;
@@ -1425,8 +1339,22 @@
return -ENOMEM;
v4l2_i2c_subdev_init(&rj54n1->subdev, client, &rj54n1_subdev_ops);
+ v4l2_ctrl_handler_init(&rj54n1->hdl, 4);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_GAIN, 0, 127, 1, 66);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+ rj54n1->subdev.ctrl_handler = &rj54n1->hdl;
+ if (rj54n1->hdl.error) {
+ int err = rj54n1->hdl.error;
- icd->ops = &rj54n1_ops;
+ kfree(rj54n1);
+ return err;
+ }
rj54n1->clk_div = clk_div;
rj54n1->rect.left = RJ54N1_COLUMN_SKIP;
@@ -1440,25 +1368,24 @@
rj54n1->tgclk_mhz = (rj54n1_priv->mclk_freq / PLL_L * PLL_N) /
(clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1);
- ret = rj54n1_video_probe(icd, client, rj54n1_priv);
+ ret = rj54n1_video_probe(client, rj54n1_priv);
if (ret < 0) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&rj54n1->hdl);
kfree(rj54n1);
return ret;
}
-
- return ret;
+ return v4l2_ctrl_handler_setup(&rj54n1->hdl);
}
static int rj54n1_remove(struct i2c_client *client)
{
struct rj54n1 *rj54n1 = to_rj54n1(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
- icd->ops = NULL;
+ v4l2_device_unregister_subdev(&rj54n1->subdev);
if (icl->free_bus)
icl->free_bus(icl);
+ v4l2_ctrl_handler_free(&rj54n1->hdl);
kfree(rj54n1);
return 0;
diff --git a/drivers/media/video/s5k6aa.c b/drivers/media/video/s5k6aa.c
new file mode 100644
index 0000000..2446736
--- /dev/null
+++ b/drivers/media/video/s5k6aa.c
@@ -0,0 +1,1680 @@
+/*
+ * Driver for Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor
+ * with embedded SoC ISP.
+ *
+ * Copyright (C) 2011, Samsung Electronics Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Based on a driver authored by Dongsoo Nathaniel Kim.
+ * Copyright (C) 2009, Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/media.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-mediabus.h>
+#include <media/s5k6aa.h>
+
+static int debug;
+module_param(debug, int, 0644);
+
+#define DRIVER_NAME "S5K6AA"
+
+/* The token to indicate array termination */
+#define S5K6AA_TERM 0xffff
+#define S5K6AA_OUT_WIDTH_DEF 640
+#define S5K6AA_OUT_HEIGHT_DEF 480
+#define S5K6AA_WIN_WIDTH_MAX 1280
+#define S5K6AA_WIN_HEIGHT_MAX 1024
+#define S5K6AA_WIN_WIDTH_MIN 8
+#define S5K6AA_WIN_HEIGHT_MIN 8
+
+/*
+ * H/W register Interface (0xD0000000 - 0xD0000FFF)
+ */
+#define AHB_MSB_ADDR_PTR 0xfcfc
+#define GEN_REG_OFFSH 0xd000
+#define REG_CMDWR_ADDRH 0x0028
+#define REG_CMDWR_ADDRL 0x002a
+#define REG_CMDRD_ADDRH 0x002c
+#define REG_CMDRD_ADDRL 0x002e
+#define REG_CMDBUF0_ADDR 0x0f12
+#define REG_CMDBUF1_ADDR 0x0f10
+
+/*
+ * Host S/W Register interface (0x70000000 - 0x70002000)
+ * The value of the two most significant address bytes is 0x7000,
+ * (HOST_SWIF_OFFS_H). The register addresses below specify 2 LSBs.
+ */
+#define HOST_SWIF_OFFSH 0x7000
+
+/* Initialization parameters */
+/* Master clock frequency in KHz */
+#define REG_I_INCLK_FREQ_L 0x01b8
+#define REG_I_INCLK_FREQ_H 0x01ba
+#define MIN_MCLK_FREQ_KHZ 6000U
+#define MAX_MCLK_FREQ_KHZ 27000U
+#define REG_I_USE_NPVI_CLOCKS 0x01c6
+#define REG_I_USE_NMIPI_CLOCKS 0x01c8
+
+/* Clock configurations, n = 0..2. REG_I_* frequency unit is 4 kHz. */
+#define REG_I_OPCLK_4KHZ(n) ((n) * 6 + 0x01cc)
+#define REG_I_MIN_OUTRATE_4KHZ(n) ((n) * 6 + 0x01ce)
+#define REG_I_MAX_OUTRATE_4KHZ(n) ((n) * 6 + 0x01d0)
+#define SYS_PLL_OUT_FREQ (48000000 / 4000)
+#define PCLK_FREQ_MIN (24000000 / 4000)
+#define PCLK_FREQ_MAX (48000000 / 4000)
+#define REG_I_INIT_PARAMS_UPDATED 0x01e0
+#define REG_I_ERROR_INFO 0x01e2
+
+/* General purpose parameters */
+#define REG_USER_BRIGHTNESS 0x01e4
+#define REG_USER_CONTRAST 0x01e6
+#define REG_USER_SATURATION 0x01e8
+#define REG_USER_SHARPBLUR 0x01ea
+
+#define REG_G_SPEC_EFFECTS 0x01ee
+#define REG_G_ENABLE_PREV 0x01f0
+#define REG_G_ENABLE_PREV_CHG 0x01f2
+#define REG_G_NEW_CFG_SYNC 0x01f8
+#define REG_G_PREVZOOM_IN_WIDTH 0x020a
+#define REG_G_PREVZOOM_IN_HEIGHT 0x020c
+#define REG_G_PREVZOOM_IN_XOFFS 0x020e
+#define REG_G_PREVZOOM_IN_YOFFS 0x0210
+#define REG_G_INPUTS_CHANGE_REQ 0x021a
+#define REG_G_ACTIVE_PREV_CFG 0x021c
+#define REG_G_PREV_CFG_CHG 0x021e
+#define REG_G_PREV_OPEN_AFTER_CH 0x0220
+#define REG_G_PREV_CFG_ERROR 0x0222
+
+/* Preview control section. n = 0...4. */
+#define PREG(n, x) ((n) * 0x26 + x)
+#define REG_P_OUT_WIDTH(n) PREG(n, 0x0242)
+#define REG_P_OUT_HEIGHT(n) PREG(n, 0x0244)
+#define REG_P_FMT(n) PREG(n, 0x0246)
+#define REG_P_MAX_OUT_RATE(n) PREG(n, 0x0248)
+#define REG_P_MIN_OUT_RATE(n) PREG(n, 0x024a)
+#define REG_P_PVI_MASK(n) PREG(n, 0x024c)
+#define REG_P_CLK_INDEX(n) PREG(n, 0x024e)
+#define REG_P_FR_RATE_TYPE(n) PREG(n, 0x0250)
+#define FR_RATE_DYNAMIC 0
+#define FR_RATE_FIXED 1
+#define FR_RATE_FIXED_ACCURATE 2
+#define REG_P_FR_RATE_Q_TYPE(n) PREG(n, 0x0252)
+#define FR_RATE_Q_BEST_FRRATE 1 /* Binning enabled */
+#define FR_RATE_Q_BEST_QUALITY 2 /* Binning disabled */
+/* Frame period in 0.1 ms units */
+#define REG_P_MAX_FR_TIME(n) PREG(n, 0x0254)
+#define REG_P_MIN_FR_TIME(n) PREG(n, 0x0256)
+/* Conversion to REG_P_[MAX/MIN]_FR_TIME value; __t: time in us */
+#define US_TO_FR_TIME(__t) ((__t) / 100)
+#define S5K6AA_MIN_FR_TIME 33300 /* us */
+#define S5K6AA_MAX_FR_TIME 650000 /* us */
+#define S5K6AA_MAX_HIGHRES_FR_TIME 666 /* x100 us */
+/* The below 5 registers are for "device correction" values */
+#define REG_P_COLORTEMP(n) PREG(n, 0x025e)
+#define REG_P_PREV_MIRROR(n) PREG(n, 0x0262)
+
+/* Extended image property controls */
+/* Exposure time in 10 us units */
+#define REG_SF_USR_EXPOSURE_L 0x03c6
+#define REG_SF_USR_EXPOSURE_H 0x03c8
+#define REG_SF_USR_EXPOSURE_CHG 0x03ca
+#define REG_SF_USR_TOT_GAIN 0x03cc
+#define REG_SF_USR_TOT_GAIN_CHG 0x03ce
+#define REG_SF_RGAIN 0x03d0
+#define REG_SF_RGAIN_CHG 0x03d2
+#define REG_SF_GGAIN 0x03d4
+#define REG_SF_GGAIN_CHG 0x03d6
+#define REG_SF_BGAIN 0x03d8
+#define REG_SF_BGAIN_CHG 0x03da
+#define REG_SF_FLICKER_QUANT 0x03dc
+#define REG_SF_FLICKER_QUANT_CHG 0x03de
+
+/* Output interface (parallel/MIPI) setup */
+#define REG_OIF_EN_MIPI_LANES 0x03fa
+#define REG_OIF_EN_PACKETS 0x03fc
+#define REG_OIF_CFG_CHG 0x03fe
+
+/* Auto-algorithms enable mask */
+#define REG_DBG_AUTOALG_EN 0x0400
+#define AALG_ALL_EN_MASK (1 << 0)
+#define AALG_AE_EN_MASK (1 << 1)
+#define AALG_DIVLEI_EN_MASK (1 << 2)
+#define AALG_WB_EN_MASK (1 << 3)
+#define AALG_FLICKER_EN_MASK (1 << 5)
+#define AALG_FIT_EN_MASK (1 << 6)
+#define AALG_WRHW_EN_MASK (1 << 7)
+
+/* Firmware revision information */
+#define REG_FW_APIVER 0x012e
+#define S5K6AAFX_FW_APIVER 0x0001
+#define REG_FW_REVISION 0x0130
+
+/* For now we use only one user configuration register set */
+#define S5K6AA_MAX_PRESETS 1
+
+static const char * const s5k6aa_supply_names[] = {
+ "vdd_core", /* Digital core supply 1.5V (1.4V to 1.6V) */
+ "vdda", /* Analog power supply 2.8V (2.6V to 3.0V) */
+ "vdd_reg", /* Regulator input power 1.8V (1.7V to 1.9V)
+ or 2.8V (2.6V to 3.0) */
+ "vddio", /* I/O supply 1.8V (1.65V to 1.95V)
+ or 2.8V (2.5V to 3.1V) */
+};
+#define S5K6AA_NUM_SUPPLIES ARRAY_SIZE(s5k6aa_supply_names)
+
+enum s5k6aa_gpio_id {
+ STBY,
+ RST,
+ GPIO_NUM,
+};
+
+struct s5k6aa_regval {
+ u16 addr;
+ u16 val;
+};
+
+struct s5k6aa_pixfmt {
+ enum v4l2_mbus_pixelcode code;
+ u32 colorspace;
+ /* REG_P_FMT(x) register value */
+ u16 reg_p_fmt;
+};
+
+struct s5k6aa_preset {
+ /* output pixel format and resolution */
+ struct v4l2_mbus_framefmt mbus_fmt;
+ u8 clk_id;
+ u8 index;
+};
+
+struct s5k6aa_ctrls {
+ struct v4l2_ctrl_handler handler;
+ /* Auto / manual white balance cluster */
+ struct v4l2_ctrl *awb;
+ struct v4l2_ctrl *gain_red;
+ struct v4l2_ctrl *gain_blue;
+ struct v4l2_ctrl *gain_green;
+ /* Mirror cluster */
+ struct v4l2_ctrl *hflip;
+ struct v4l2_ctrl *vflip;
+ /* Auto exposure / manual exposure and gain cluster */
+ struct v4l2_ctrl *auto_exp;
+ struct v4l2_ctrl *exposure;
+ struct v4l2_ctrl *gain;
+};
+
+struct s5k6aa_interval {
+ u16 reg_fr_time;
+ struct v4l2_fract interval;
+ /* Maximum rectangle for the interval */
+ struct v4l2_frmsize_discrete size;
+};
+
+struct s5k6aa {
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+
+ enum v4l2_mbus_type bus_type;
+ u8 mipi_lanes;
+
+ int (*s_power)(int enable);
+ struct regulator_bulk_data supplies[S5K6AA_NUM_SUPPLIES];
+ struct s5k6aa_gpio gpio[GPIO_NUM];
+
+ /* external master clock frequency */
+ unsigned long mclk_frequency;
+ /* ISP internal master clock frequency */
+ u16 clk_fop;
+ /* output pixel clock frequency range */
+ u16 pclk_fmin;
+ u16 pclk_fmax;
+
+ unsigned int inv_hflip:1;
+ unsigned int inv_vflip:1;
+
+ /* protects the struct members below */
+ struct mutex lock;
+
+ /* sensor matrix scan window */
+ struct v4l2_rect ccd_rect;
+
+ struct s5k6aa_ctrls ctrls;
+ struct s5k6aa_preset presets[S5K6AA_MAX_PRESETS];
+ struct s5k6aa_preset *preset;
+ const struct s5k6aa_interval *fiv;
+
+ unsigned int streaming:1;
+ unsigned int apply_cfg:1;
+ unsigned int apply_crop:1;
+ unsigned int power;
+};
+
+static struct s5k6aa_regval s5k6aa_analog_config[] = {
+ /* Analog settings */
+ { 0x112a, 0x0000 }, { 0x1132, 0x0000 },
+ { 0x113e, 0x0000 }, { 0x115c, 0x0000 },
+ { 0x1164, 0x0000 }, { 0x1174, 0x0000 },
+ { 0x1178, 0x0000 }, { 0x077a, 0x0000 },
+ { 0x077c, 0x0000 }, { 0x077e, 0x0000 },
+ { 0x0780, 0x0000 }, { 0x0782, 0x0000 },
+ { 0x0784, 0x0000 }, { 0x0786, 0x0000 },
+ { 0x0788, 0x0000 }, { 0x07a2, 0x0000 },
+ { 0x07a4, 0x0000 }, { 0x07a6, 0x0000 },
+ { 0x07a8, 0x0000 }, { 0x07b6, 0x0000 },
+ { 0x07b8, 0x0002 }, { 0x07ba, 0x0004 },
+ { 0x07bc, 0x0004 }, { 0x07be, 0x0005 },
+ { 0x07c0, 0x0005 }, { S5K6AA_TERM, 0 },
+};
+
+/* TODO: Add RGB888 and Bayer format */
+static const struct s5k6aa_pixfmt s5k6aa_formats[] = {
+ { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_JPEG, 5 },
+ /* range 16-240 */
+ { V4L2_MBUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_REC709, 6 },
+ { V4L2_MBUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_JPEG, 0 },
+};
+
+static const struct s5k6aa_interval s5k6aa_intervals[] = {
+ { 1000, {10000, 1000000}, {1280, 1024} }, /* 10 fps */
+ { 666, {15000, 1000000}, {1280, 1024} }, /* 15 fps */
+ { 500, {20000, 1000000}, {1280, 720} }, /* 20 fps */
+ { 400, {25000, 1000000}, {640, 480} }, /* 25 fps */
+ { 333, {33300, 1000000}, {640, 480} }, /* 30 fps */
+};
+
+#define S5K6AA_INTERVAL_DEF_INDEX 1 /* 15 fps */
+
+static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
+{
+ return &container_of(ctrl->handler, struct s5k6aa, ctrls.handler)->sd;
+}
+
+static inline struct s5k6aa *to_s5k6aa(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct s5k6aa, sd);
+}
+
+/* Set initial values for all preview presets */
+static void s5k6aa_presets_data_init(struct s5k6aa *s5k6aa)
+{
+ struct s5k6aa_preset *preset = &s5k6aa->presets[0];
+ int i;
+
+ for (i = 0; i < S5K6AA_MAX_PRESETS; i++) {
+ preset->mbus_fmt.width = S5K6AA_OUT_WIDTH_DEF;
+ preset->mbus_fmt.height = S5K6AA_OUT_HEIGHT_DEF;
+ preset->mbus_fmt.code = s5k6aa_formats[0].code;
+ preset->index = i;
+ preset->clk_id = 0;
+ preset++;
+ }
+
+ s5k6aa->fiv = &s5k6aa_intervals[S5K6AA_INTERVAL_DEF_INDEX];
+ s5k6aa->preset = &s5k6aa->presets[0];
+}
+
+static int s5k6aa_i2c_read(struct i2c_client *client, u16 addr, u16 *val)
+{
+ u8 wbuf[2] = {addr >> 8, addr & 0xFF};
+ struct i2c_msg msg[2];
+ u8 rbuf[2];
+ int ret;
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].len = 2;
+ msg[0].buf = wbuf;
+
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = 2;
+ msg[1].buf = rbuf;
+
+ ret = i2c_transfer(client->adapter, msg, 2);
+ *val = be16_to_cpu(*((u16 *)rbuf));
+
+ v4l2_dbg(3, debug, client, "i2c_read: 0x%04X : 0x%04x\n", addr, *val);
+
+ return ret == 2 ? 0 : ret;
+}
+
+static int s5k6aa_i2c_write(struct i2c_client *client, u16 addr, u16 val)
+{
+ u8 buf[4] = {addr >> 8, addr & 0xFF, val >> 8, val & 0xFF};
+
+ int ret = i2c_master_send(client, buf, 4);
+ v4l2_dbg(3, debug, client, "i2c_write: 0x%04X : 0x%04x\n", addr, val);
+
+ return ret == 4 ? 0 : ret;
+}
+
+/* The command register write, assumes Command_Wr_addH = 0x7000. */
+static int s5k6aa_write(struct i2c_client *c, u16 addr, u16 val)
+{
+ int ret = s5k6aa_i2c_write(c, REG_CMDWR_ADDRL, addr);
+ if (ret)
+ return ret;
+ return s5k6aa_i2c_write(c, REG_CMDBUF0_ADDR, val);
+}
+
+/* The command register read, assumes Command_Rd_addH = 0x7000. */
+static int s5k6aa_read(struct i2c_client *client, u16 addr, u16 *val)
+{
+ int ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRL, addr);
+ if (ret)
+ return ret;
+ return s5k6aa_i2c_read(client, REG_CMDBUF0_ADDR, val);
+}
+
+static int s5k6aa_write_array(struct v4l2_subdev *sd,
+ const struct s5k6aa_regval *msg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u16 addr_incr = 0;
+ int ret = 0;
+
+ while (msg->addr != S5K6AA_TERM) {
+ if (addr_incr != 2)
+ ret = s5k6aa_i2c_write(client, REG_CMDWR_ADDRL,
+ msg->addr);
+ if (ret)
+ break;
+ ret = s5k6aa_i2c_write(client, REG_CMDBUF0_ADDR, msg->val);
+ if (ret)
+ break;
+ /* Assume that msg->addr is always less than 0xfffc */
+ addr_incr = (msg + 1)->addr - msg->addr;
+ msg++;
+ }
+
+ return ret;
+}
+
+/* Configure the AHB high address bytes for GTG registers access */
+static int s5k6aa_set_ahb_address(struct i2c_client *client)
+{
+ int ret = s5k6aa_i2c_write(client, AHB_MSB_ADDR_PTR, GEN_REG_OFFSH);
+ if (ret)
+ return ret;
+ ret = s5k6aa_i2c_write(client, REG_CMDRD_ADDRH, HOST_SWIF_OFFSH);
+ if (ret)
+ return ret;
+ return s5k6aa_i2c_write(client, REG_CMDWR_ADDRH, HOST_SWIF_OFFSH);
+}
+
+/**
+ * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration
+ *
+ * Configure the internal ISP PLL for the required output frequency.
+ * Locking: called with s5k6aa.lock mutex held.
+ */
+static int s5k6aa_configure_pixel_clocks(struct s5k6aa *s5k6aa)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+ unsigned long fmclk = s5k6aa->mclk_frequency / 1000;
+ u16 status;
+ int ret;
+
+ if (WARN(fmclk < MIN_MCLK_FREQ_KHZ || fmclk > MAX_MCLK_FREQ_KHZ,
+ "Invalid clock frequency: %ld\n", fmclk))
+ return -EINVAL;
+
+ s5k6aa->pclk_fmin = PCLK_FREQ_MIN;
+ s5k6aa->pclk_fmax = PCLK_FREQ_MAX;
+ s5k6aa->clk_fop = SYS_PLL_OUT_FREQ;
+
+ /* External input clock frequency in kHz */
+ ret = s5k6aa_write(c, REG_I_INCLK_FREQ_H, fmclk >> 16);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_I_INCLK_FREQ_L, fmclk & 0xFFFF);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_I_USE_NPVI_CLOCKS, 1);
+ /* Internal PLL frequency */
+ if (!ret)
+ ret = s5k6aa_write(c, REG_I_OPCLK_4KHZ(0), s5k6aa->clk_fop);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_I_MIN_OUTRATE_4KHZ(0),
+ s5k6aa->pclk_fmin);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_I_MAX_OUTRATE_4KHZ(0),
+ s5k6aa->pclk_fmax);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_I_INIT_PARAMS_UPDATED, 1);
+ if (!ret)
+ ret = s5k6aa_read(c, REG_I_ERROR_INFO, &status);
+
+ return ret ? ret : (status ? -EINVAL : 0);
+}
+
+/* Set horizontal and vertical image flipping */
+static int s5k6aa_set_mirror(struct s5k6aa *s5k6aa, int horiz_flip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ int index = s5k6aa->preset->index;
+
+ unsigned int vflip = s5k6aa->ctrls.vflip->val ^ s5k6aa->inv_vflip;
+ unsigned int flip = (horiz_flip ^ s5k6aa->inv_hflip) | (vflip << 1);
+
+ return s5k6aa_write(client, REG_P_PREV_MIRROR(index), flip);
+}
+
+/* Configure auto/manual white balance and R/G/B gains */
+static int s5k6aa_set_awb(struct s5k6aa *s5k6aa, int awb)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+ struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
+ u16 reg;
+
+ int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, ®);
+
+ if (!ret && !awb) {
+ ret = s5k6aa_write(c, REG_SF_RGAIN, ctrls->gain_red->val);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_SF_RGAIN_CHG, 1);
+ if (ret)
+ return ret;
+
+ ret = s5k6aa_write(c, REG_SF_GGAIN, ctrls->gain_green->val);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_SF_GGAIN_CHG, 1);
+ if (ret)
+ return ret;
+
+ ret = s5k6aa_write(c, REG_SF_BGAIN, ctrls->gain_blue->val);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_SF_BGAIN_CHG, 1);
+ }
+ if (!ret) {
+ reg = awb ? reg | AALG_WB_EN_MASK : reg & ~AALG_WB_EN_MASK;
+ ret = s5k6aa_write(c, REG_DBG_AUTOALG_EN, reg);
+ }
+
+ return ret;
+}
+
+/* Program FW with exposure time, 'exposure' in us units */
+static int s5k6aa_set_user_exposure(struct i2c_client *client, int exposure)
+{
+ unsigned int time = exposure / 10;
+
+ int ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_L, time & 0xffff);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_SF_USR_EXPOSURE_H, time >> 16);
+ if (ret)
+ return ret;
+ return s5k6aa_write(client, REG_SF_USR_EXPOSURE_CHG, 1);
+}
+
+static int s5k6aa_set_user_gain(struct i2c_client *client, int gain)
+{
+ int ret = s5k6aa_write(client, REG_SF_USR_TOT_GAIN, gain);
+ if (ret)
+ return ret;
+ return s5k6aa_write(client, REG_SF_USR_TOT_GAIN_CHG, 1);
+}
+
+/* Set auto/manual exposure and total gain */
+static int s5k6aa_set_auto_exposure(struct s5k6aa *s5k6aa, int value)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+ unsigned int exp_time = s5k6aa->ctrls.exposure->val;
+ u16 auto_alg;
+
+ int ret = s5k6aa_read(c, REG_DBG_AUTOALG_EN, &auto_alg);
+ if (ret)
+ return ret;
+
+ v4l2_dbg(1, debug, c, "man_exp: %d, auto_exp: %d, a_alg: 0x%x\n",
+ exp_time, value, auto_alg);
+
+ if (value == V4L2_EXPOSURE_AUTO) {
+ auto_alg |= AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK;
+ } else {
+ ret = s5k6aa_set_user_exposure(c, exp_time);
+ if (ret)
+ return ret;
+ ret = s5k6aa_set_user_gain(c, s5k6aa->ctrls.gain->val);
+ if (ret)
+ return ret;
+ auto_alg &= ~(AALG_AE_EN_MASK | AALG_DIVLEI_EN_MASK);
+ }
+
+ return s5k6aa_write(c, REG_DBG_AUTOALG_EN, auto_alg);
+}
+
+static int s5k6aa_set_anti_flicker(struct s5k6aa *s5k6aa, int value)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ u16 auto_alg;
+ int ret;
+
+ ret = s5k6aa_read(client, REG_DBG_AUTOALG_EN, &auto_alg);
+ if (ret)
+ return ret;
+
+ if (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) {
+ auto_alg |= AALG_FLICKER_EN_MASK;
+ } else {
+ auto_alg &= ~AALG_FLICKER_EN_MASK;
+ /* The V4L2_CID_LINE_FREQUENCY control values match
+ * the register values */
+ ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT, value);
+ if (ret)
+ return ret;
+ ret = s5k6aa_write(client, REG_SF_FLICKER_QUANT_CHG, 1);
+ if (ret)
+ return ret;
+ }
+
+ return s5k6aa_write(client, REG_DBG_AUTOALG_EN, auto_alg);
+}
+
+static int s5k6aa_set_colorfx(struct s5k6aa *s5k6aa, int val)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ static const struct v4l2_control colorfx[] = {
+ { V4L2_COLORFX_NONE, 0 },
+ { V4L2_COLORFX_BW, 1 },
+ { V4L2_COLORFX_NEGATIVE, 2 },
+ { V4L2_COLORFX_SEPIA, 3 },
+ { V4L2_COLORFX_SKY_BLUE, 4 },
+ { V4L2_COLORFX_SKETCH, 5 },
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(colorfx); i++) {
+ if (colorfx[i].id == val)
+ return s5k6aa_write(client, REG_G_SPEC_EFFECTS,
+ colorfx[i].value);
+ }
+ return -EINVAL;
+}
+
+static int s5k6aa_preview_config_status(struct i2c_client *client)
+{
+ u16 error = 0;
+ int ret = s5k6aa_read(client, REG_G_PREV_CFG_ERROR, &error);
+
+ v4l2_dbg(1, debug, client, "error: 0x%x (%d)\n", error, ret);
+ return ret ? ret : (error ? -EINVAL : 0);
+}
+
+static int s5k6aa_get_pixfmt_index(struct s5k6aa *s5k6aa,
+ struct v4l2_mbus_framefmt *mf)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5k6aa_formats); i++)
+ if (mf->colorspace == s5k6aa_formats[i].colorspace &&
+ mf->code == s5k6aa_formats[i].code)
+ return i;
+ return 0;
+}
+
+static int s5k6aa_set_output_framefmt(struct s5k6aa *s5k6aa,
+ struct s5k6aa_preset *preset)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ int fmt_index = s5k6aa_get_pixfmt_index(s5k6aa, &preset->mbus_fmt);
+ int ret;
+
+ ret = s5k6aa_write(client, REG_P_OUT_WIDTH(preset->index),
+ preset->mbus_fmt.width);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_OUT_HEIGHT(preset->index),
+ preset->mbus_fmt.height);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_FMT(preset->index),
+ s5k6aa_formats[fmt_index].reg_p_fmt);
+ return ret;
+}
+
+static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa)
+{
+ struct i2c_client *c = v4l2_get_subdevdata(&s5k6aa->sd);
+ struct v4l2_rect *r = &s5k6aa->ccd_rect;
+ int ret;
+
+ ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_WIDTH, r->width);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_HEIGHT, r->height);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_XOFFS, r->left);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_G_PREVZOOM_IN_YOFFS, r->top);
+ if (!ret)
+ ret = s5k6aa_write(c, REG_G_INPUTS_CHANGE_REQ, 1);
+ if (!ret)
+ s5k6aa->apply_crop = 0;
+
+ return ret;
+}
+
+/**
+ * s5k6aa_configure_video_bus - configure the video output interface
+ * @bus_type: video bus type: parallel or MIPI-CSI
+ * @nlanes: number of MIPI lanes to be used (MIPI-CSI only)
+ *
+ * Note: Only parallel bus operation has been tested.
+ */
+static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa,
+ enum v4l2_mbus_type bus_type, int nlanes)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ u16 cfg = 0;
+ int ret;
+
+ /*
+ * TODO: The sensor is supposed to support BT.601 and BT.656
+ * but there is nothing indicating how to switch between both
+ * in the datasheet. For now default BT.601 interface is assumed.
+ */
+ if (bus_type == V4L2_MBUS_CSI2)
+ cfg = nlanes;
+ else if (bus_type != V4L2_MBUS_PARALLEL)
+ return -EINVAL;
+
+ ret = s5k6aa_write(client, REG_OIF_EN_MIPI_LANES, cfg);
+ if (ret)
+ return ret;
+ return s5k6aa_write(client, REG_OIF_CFG_CHG, 1);
+}
+
+/* This function should be called when switching to new user configuration set*/
+static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout,
+ int cid)
+{
+ unsigned long end = jiffies + msecs_to_jiffies(timeout);
+ u16 reg = 1;
+ int ret;
+
+ ret = s5k6aa_write(client, REG_G_ACTIVE_PREV_CFG, cid);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_G_NEW_CFG_SYNC, 1);
+ if (timeout == 0)
+ return ret;
+
+ while (ret >= 0 && time_is_after_jiffies(end)) {
+ ret = s5k6aa_read(client, REG_G_NEW_CFG_SYNC, ®);
+ if (!reg)
+ return 0;
+ usleep_range(1000, 5000);
+ }
+ return ret ? ret : -ETIMEDOUT;
+}
+
+/**
+ * s5k6aa_set_prev_config - write user preview register set
+ *
+ * Configure output resolution and color fromat, pixel clock
+ * frequency range, device frame rate type and frame period range.
+ */
+static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa,
+ struct s5k6aa_preset *preset)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ int idx = preset->index;
+ u16 frame_rate_q;
+ int ret;
+
+ if (s5k6aa->fiv->reg_fr_time >= S5K6AA_MAX_HIGHRES_FR_TIME)
+ frame_rate_q = FR_RATE_Q_BEST_FRRATE;
+ else
+ frame_rate_q = FR_RATE_Q_BEST_QUALITY;
+
+ ret = s5k6aa_set_output_framefmt(s5k6aa, preset);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_MAX_OUT_RATE(idx),
+ s5k6aa->pclk_fmax);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_MIN_OUT_RATE(idx),
+ s5k6aa->pclk_fmin);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_CLK_INDEX(idx),
+ preset->clk_id);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_FR_RATE_TYPE(idx),
+ FR_RATE_DYNAMIC);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_FR_RATE_Q_TYPE(idx),
+ frame_rate_q);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_MAX_FR_TIME(idx),
+ s5k6aa->fiv->reg_fr_time + 33);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_P_MIN_FR_TIME(idx),
+ s5k6aa->fiv->reg_fr_time - 33);
+ if (!ret)
+ ret = s5k6aa_new_config_sync(client, 250, idx);
+ if (!ret)
+ ret = s5k6aa_preview_config_status(client);
+ if (!ret)
+ s5k6aa->apply_cfg = 0;
+
+ v4l2_dbg(1, debug, client, "Frame interval: %d +/- 3.3ms. (%d)\n",
+ s5k6aa->fiv->reg_fr_time, ret);
+ return ret;
+}
+
+/**
+ * s5k6aa_initialize_isp - basic ISP MCU initialization
+ *
+ * Configure AHB addresses for registers read/write; configure PLLs for
+ * required output pixel clock. The ISP power supply needs to be already
+ * enabled, with an optional H/W reset.
+ * Locking: called with s5k6aa.lock mutex held.
+ */
+static int s5k6aa_initialize_isp(struct v4l2_subdev *sd)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ int ret;
+
+ s5k6aa->apply_crop = 1;
+ s5k6aa->apply_cfg = 1;
+ msleep(100);
+
+ ret = s5k6aa_set_ahb_address(client);
+ if (ret)
+ return ret;
+ ret = s5k6aa_configure_video_bus(s5k6aa, s5k6aa->bus_type,
+ s5k6aa->mipi_lanes);
+ if (ret)
+ return ret;
+ ret = s5k6aa_write_array(sd, s5k6aa_analog_config);
+ if (ret)
+ return ret;
+ msleep(20);
+
+ return s5k6aa_configure_pixel_clocks(s5k6aa);
+}
+
+static int s5k6aa_gpio_set_value(struct s5k6aa *priv, int id, u32 val)
+{
+ if (!gpio_is_valid(priv->gpio[id].gpio))
+ return 0;
+ gpio_set_value(priv->gpio[id].gpio, !!val);
+ return 1;
+}
+
+static int s5k6aa_gpio_assert(struct s5k6aa *priv, int id)
+{
+ return s5k6aa_gpio_set_value(priv, id, priv->gpio[id].level);
+}
+
+static int s5k6aa_gpio_deassert(struct s5k6aa *priv, int id)
+{
+ return s5k6aa_gpio_set_value(priv, id, !priv->gpio[id].level);
+}
+
+static int __s5k6aa_power_on(struct s5k6aa *s5k6aa)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+ if (ret)
+ return ret;
+ if (s5k6aa_gpio_deassert(s5k6aa, STBY))
+ usleep_range(150, 200);
+
+ if (s5k6aa->s_power)
+ ret = s5k6aa->s_power(1);
+ usleep_range(4000, 4000);
+
+ if (s5k6aa_gpio_deassert(s5k6aa, RST))
+ msleep(20);
+
+ return ret;
+}
+
+static int __s5k6aa_power_off(struct s5k6aa *s5k6aa)
+{
+ int ret;
+
+ if (s5k6aa_gpio_assert(s5k6aa, RST))
+ usleep_range(100, 150);
+
+ if (s5k6aa->s_power) {
+ ret = s5k6aa->s_power(0);
+ if (ret)
+ return ret;
+ }
+ if (s5k6aa_gpio_assert(s5k6aa, STBY))
+ usleep_range(50, 100);
+ s5k6aa->streaming = 0;
+
+ return regulator_bulk_disable(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+}
+
+/*
+ * V4L2 subdev core and video operations
+ */
+static int s5k6aa_set_power(struct v4l2_subdev *sd, int on)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ int ret = 0;
+
+ mutex_lock(&s5k6aa->lock);
+
+ if (!on == s5k6aa->power) {
+ if (on) {
+ ret = __s5k6aa_power_on(s5k6aa);
+ if (!ret)
+ ret = s5k6aa_initialize_isp(sd);
+ } else {
+ ret = __s5k6aa_power_off(s5k6aa);
+ }
+
+ if (!ret)
+ s5k6aa->power += on ? 1 : -1;
+ }
+
+ mutex_unlock(&s5k6aa->lock);
+
+ if (!on || ret || s5k6aa->power != 1)
+ return ret;
+
+ return v4l2_ctrl_handler_setup(sd->ctrl_handler);
+}
+
+static int __s5k6aa_stream(struct s5k6aa *s5k6aa, int enable)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ int ret = 0;
+
+ ret = s5k6aa_write(client, REG_G_ENABLE_PREV, enable);
+ if (!ret)
+ ret = s5k6aa_write(client, REG_G_ENABLE_PREV_CHG, 1);
+ if (!ret)
+ s5k6aa->streaming = enable;
+
+ return ret;
+}
+
+static int s5k6aa_s_stream(struct v4l2_subdev *sd, int on)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ int ret = 0;
+
+ mutex_lock(&s5k6aa->lock);
+
+ if (s5k6aa->streaming == !on) {
+ if (!ret && s5k6aa->apply_cfg)
+ ret = s5k6aa_set_prev_config(s5k6aa, s5k6aa->preset);
+ if (s5k6aa->apply_crop)
+ ret = s5k6aa_set_input_params(s5k6aa);
+ if (!ret)
+ ret = __s5k6aa_stream(s5k6aa, !!on);
+ }
+ mutex_unlock(&s5k6aa->lock);
+
+ return ret;
+}
+
+static int s5k6aa_g_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *fi)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+
+ mutex_lock(&s5k6aa->lock);
+ fi->interval = s5k6aa->fiv->interval;
+ mutex_unlock(&s5k6aa->lock);
+
+ return 0;
+}
+
+static int __s5k6aa_set_frame_interval(struct s5k6aa *s5k6aa,
+ struct v4l2_subdev_frame_interval *fi)
+{
+ struct v4l2_mbus_framefmt *mbus_fmt = &s5k6aa->preset->mbus_fmt;
+ const struct s5k6aa_interval *fiv = &s5k6aa_intervals[0];
+ unsigned int err, min_err = UINT_MAX;
+ unsigned int i, fr_time;
+
+ if (fi->interval.denominator == 0)
+ return -EINVAL;
+
+ fr_time = fi->interval.numerator * 10000 / fi->interval.denominator;
+
+ for (i = 0; i < ARRAY_SIZE(s5k6aa_intervals); i++) {
+ const struct s5k6aa_interval *iv = &s5k6aa_intervals[i];
+
+ if (mbus_fmt->width > iv->size.width ||
+ mbus_fmt->height > iv->size.height)
+ continue;
+
+ err = abs(iv->reg_fr_time - fr_time);
+ if (err < min_err) {
+ fiv = iv;
+ min_err = err;
+ }
+ }
+ s5k6aa->fiv = fiv;
+
+ v4l2_dbg(1, debug, &s5k6aa->sd, "Changed frame interval to %d us\n",
+ fiv->reg_fr_time * 100);
+ return 0;
+}
+
+static int s5k6aa_s_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *fi)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ int ret;
+
+ v4l2_dbg(1, debug, sd, "Setting %d/%d frame interval\n",
+ fi->interval.numerator, fi->interval.denominator);
+
+ mutex_lock(&s5k6aa->lock);
+ ret = __s5k6aa_set_frame_interval(s5k6aa, fi);
+ s5k6aa->apply_cfg = 1;
+
+ mutex_unlock(&s5k6aa->lock);
+ return ret;
+}
+
+/*
+ * V4L2 subdev pad level and video operations
+ */
+static int s5k6aa_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ const struct s5k6aa_interval *fi;
+ int ret = 0;
+
+ if (fie->index > ARRAY_SIZE(s5k6aa_intervals))
+ return -EINVAL;
+
+ v4l_bound_align_image(&fie->width, S5K6AA_WIN_WIDTH_MIN,
+ S5K6AA_WIN_WIDTH_MAX, 1,
+ &fie->height, S5K6AA_WIN_HEIGHT_MIN,
+ S5K6AA_WIN_HEIGHT_MAX, 1, 0);
+
+ mutex_lock(&s5k6aa->lock);
+ fi = &s5k6aa_intervals[fie->index];
+ if (fie->width > fi->size.width || fie->height > fi->size.height)
+ ret = -EINVAL;
+ else
+ fie->interval = fi->interval;
+ mutex_unlock(&s5k6aa->lock);
+
+ return ret;
+}
+
+static int s5k6aa_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index >= ARRAY_SIZE(s5k6aa_formats))
+ return -EINVAL;
+
+ code->code = s5k6aa_formats[code->index].code;
+ return 0;
+}
+
+static int s5k6aa_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ int i = ARRAY_SIZE(s5k6aa_formats);
+
+ if (fse->index > 0)
+ return -EINVAL;
+
+ while (--i)
+ if (fse->code == s5k6aa_formats[i].code)
+ break;
+
+ fse->code = s5k6aa_formats[i].code;
+ fse->min_width = S5K6AA_WIN_WIDTH_MIN;
+ fse->max_width = S5K6AA_WIN_WIDTH_MAX;
+ fse->max_height = S5K6AA_WIN_HEIGHT_MIN;
+ fse->min_height = S5K6AA_WIN_HEIGHT_MAX;
+
+ return 0;
+}
+
+static struct v4l2_rect *
+__s5k6aa_get_crop_rect(struct s5k6aa *s5k6aa, struct v4l2_subdev_fh *fh,
+ enum v4l2_subdev_format_whence which)
+{
+ if (which == V4L2_SUBDEV_FORMAT_ACTIVE)
+ return &s5k6aa->ccd_rect;
+ if (which == V4L2_SUBDEV_FORMAT_TRY)
+ return v4l2_subdev_get_try_crop(fh, 0);
+
+ return NULL;
+}
+
+static void s5k6aa_try_format(struct s5k6aa *s5k6aa,
+ struct v4l2_mbus_framefmt *mf)
+{
+ unsigned int index;
+
+ v4l_bound_align_image(&mf->width, S5K6AA_WIN_WIDTH_MIN,
+ S5K6AA_WIN_WIDTH_MAX, 1,
+ &mf->height, S5K6AA_WIN_HEIGHT_MIN,
+ S5K6AA_WIN_HEIGHT_MAX, 1, 0);
+
+ if (mf->colorspace != V4L2_COLORSPACE_JPEG &&
+ mf->colorspace != V4L2_COLORSPACE_REC709)
+ mf->colorspace = V4L2_COLORSPACE_JPEG;
+
+ index = s5k6aa_get_pixfmt_index(s5k6aa, mf);
+
+ mf->colorspace = s5k6aa_formats[index].colorspace;
+ mf->code = s5k6aa_formats[index].code;
+ mf->field = V4L2_FIELD_NONE;
+}
+
+static int s5k6aa_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ struct v4l2_mbus_framefmt *mf;
+
+ memset(fmt->reserved, 0, sizeof(fmt->reserved));
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ mf = v4l2_subdev_get_try_format(fh, 0);
+ fmt->format = *mf;
+ return 0;
+ }
+
+ mutex_lock(&s5k6aa->lock);
+ fmt->format = s5k6aa->preset->mbus_fmt;
+ mutex_unlock(&s5k6aa->lock);
+
+ return 0;
+}
+
+static int s5k6aa_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_format *fmt)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ struct s5k6aa_preset *preset = s5k6aa->preset;
+ struct v4l2_mbus_framefmt *mf;
+ struct v4l2_rect *crop;
+ int ret = 0;
+
+ mutex_lock(&s5k6aa->lock);
+ s5k6aa_try_format(s5k6aa, &fmt->format);
+
+ if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
+ mf = v4l2_subdev_get_try_format(fh, fmt->pad);
+ crop = v4l2_subdev_get_try_crop(fh, 0);
+ } else {
+ if (s5k6aa->streaming) {
+ ret = -EBUSY;
+ } else {
+ mf = &preset->mbus_fmt;
+ crop = &s5k6aa->ccd_rect;
+ s5k6aa->apply_cfg = 1;
+ }
+ }
+
+ if (ret == 0) {
+ struct v4l2_subdev_frame_interval fiv = {
+ .interval = {0, 1}
+ };
+
+ *mf = fmt->format;
+ /*
+ * Make sure the crop window is valid, i.e. its size is
+ * greater than the output window, as the ISP supports
+ * only down-scaling.
+ */
+ crop->width = clamp_t(unsigned int, crop->width, mf->width,
+ S5K6AA_WIN_WIDTH_MAX);
+ crop->height = clamp_t(unsigned int, crop->height, mf->height,
+ S5K6AA_WIN_HEIGHT_MAX);
+ crop->left = clamp_t(unsigned int, crop->left, 0,
+ S5K6AA_WIN_WIDTH_MAX - crop->width);
+ crop->top = clamp_t(unsigned int, crop->top, 0,
+ S5K6AA_WIN_HEIGHT_MAX - crop->height);
+
+ /* Reset to minimum possible frame interval */
+ ret = __s5k6aa_set_frame_interval(s5k6aa, &fiv);
+ }
+ mutex_unlock(&s5k6aa->lock);
+
+ return ret;
+}
+
+static int s5k6aa_get_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ struct v4l2_rect *rect;
+
+ memset(crop->reserved, 0, sizeof(crop->reserved));
+ mutex_lock(&s5k6aa->lock);
+
+ rect = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which);
+ if (rect)
+ crop->rect = *rect;
+
+ mutex_unlock(&s5k6aa->lock);
+
+ v4l2_dbg(1, debug, sd, "Current crop rectangle: (%d,%d)/%dx%d\n",
+ rect->left, rect->top, rect->width, rect->height);
+
+ return 0;
+}
+
+static int s5k6aa_set_crop(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
+ struct v4l2_subdev_crop *crop)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ struct v4l2_mbus_framefmt *mf;
+ unsigned int max_x, max_y;
+ struct v4l2_rect *crop_r;
+
+ mutex_lock(&s5k6aa->lock);
+ crop_r = __s5k6aa_get_crop_rect(s5k6aa, fh, crop->which);
+
+ if (crop->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+ mf = &s5k6aa->preset->mbus_fmt;
+ s5k6aa->apply_crop = 1;
+ } else {
+ mf = v4l2_subdev_get_try_format(fh, 0);
+ }
+ v4l_bound_align_image(&crop->rect.width, mf->width,
+ S5K6AA_WIN_WIDTH_MAX, 1,
+ &crop->rect.height, mf->height,
+ S5K6AA_WIN_HEIGHT_MAX, 1, 0);
+
+ max_x = (S5K6AA_WIN_WIDTH_MAX - crop->rect.width) & ~1;
+ max_y = (S5K6AA_WIN_HEIGHT_MAX - crop->rect.height) & ~1;
+
+ crop->rect.left = clamp_t(unsigned int, crop->rect.left, 0, max_x);
+ crop->rect.top = clamp_t(unsigned int, crop->rect.top, 0, max_y);
+
+ *crop_r = crop->rect;
+
+ mutex_unlock(&s5k6aa->lock);
+
+ v4l2_dbg(1, debug, sd, "Set crop rectangle: (%d,%d)/%dx%d\n",
+ crop_r->left, crop_r->top, crop_r->width, crop_r->height);
+
+ return 0;
+}
+
+static const struct v4l2_subdev_pad_ops s5k6aa_pad_ops = {
+ .enum_mbus_code = s5k6aa_enum_mbus_code,
+ .enum_frame_size = s5k6aa_enum_frame_size,
+ .enum_frame_interval = s5k6aa_enum_frame_interval,
+ .get_fmt = s5k6aa_get_fmt,
+ .set_fmt = s5k6aa_set_fmt,
+ .get_crop = s5k6aa_get_crop,
+ .set_crop = s5k6aa_set_crop,
+};
+
+static const struct v4l2_subdev_video_ops s5k6aa_video_ops = {
+ .g_frame_interval = s5k6aa_g_frame_interval,
+ .s_frame_interval = s5k6aa_s_frame_interval,
+ .s_stream = s5k6aa_s_stream,
+};
+
+/*
+ * V4L2 subdev controls
+ */
+
+static int s5k6aa_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ int idx, err = 0;
+
+ v4l2_dbg(1, debug, sd, "ctrl: 0x%x, value: %d\n", ctrl->id, ctrl->val);
+
+ mutex_lock(&s5k6aa->lock);
+ /*
+ * If the device is not powered up by the host driver do
+ * not apply any controls to H/W at this time. Instead
+ * the controls will be restored right after power-up.
+ */
+ if (s5k6aa->power == 0)
+ goto unlock;
+ idx = s5k6aa->preset->index;
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUTO_WHITE_BALANCE:
+ err = s5k6aa_set_awb(s5k6aa, ctrl->val);
+ break;
+
+ case V4L2_CID_BRIGHTNESS:
+ err = s5k6aa_write(client, REG_USER_BRIGHTNESS, ctrl->val);
+ break;
+
+ case V4L2_CID_COLORFX:
+ err = s5k6aa_set_colorfx(s5k6aa, ctrl->val);
+ break;
+
+ case V4L2_CID_CONTRAST:
+ err = s5k6aa_write(client, REG_USER_CONTRAST, ctrl->val);
+ break;
+
+ case V4L2_CID_EXPOSURE_AUTO:
+ err = s5k6aa_set_auto_exposure(s5k6aa, ctrl->val);
+ break;
+
+ case V4L2_CID_HFLIP:
+ err = s5k6aa_set_mirror(s5k6aa, ctrl->val);
+ if (err)
+ break;
+ err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
+ break;
+
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ err = s5k6aa_set_anti_flicker(s5k6aa, ctrl->val);
+ break;
+
+ case V4L2_CID_SATURATION:
+ err = s5k6aa_write(client, REG_USER_SATURATION, ctrl->val);
+ break;
+
+ case V4L2_CID_SHARPNESS:
+ err = s5k6aa_write(client, REG_USER_SHARPBLUR, ctrl->val);
+ break;
+
+ case V4L2_CID_WHITE_BALANCE_TEMPERATURE:
+ err = s5k6aa_write(client, REG_P_COLORTEMP(idx), ctrl->val);
+ if (err)
+ break;
+ err = s5k6aa_write(client, REG_G_PREV_CFG_CHG, 1);
+ break;
+ }
+unlock:
+ mutex_unlock(&s5k6aa->lock);
+ return err;
+}
+
+static const struct v4l2_ctrl_ops s5k6aa_ctrl_ops = {
+ .s_ctrl = s5k6aa_s_ctrl,
+};
+
+static int s5k6aa_log_status(struct v4l2_subdev *sd)
+{
+ v4l2_ctrl_handler_log_status(sd->ctrl_handler, sd->name);
+ return 0;
+}
+
+#define V4L2_CID_RED_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1001)
+#define V4L2_CID_GREEN_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1002)
+#define V4L2_CID_BLUE_GAIN (V4L2_CTRL_CLASS_CAMERA | 0x1003)
+
+static const struct v4l2_ctrl_config s5k6aa_ctrls[] = {
+ {
+ .ops = &s5k6aa_ctrl_ops,
+ .id = V4L2_CID_RED_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain, Red",
+ .min = 0,
+ .max = 256,
+ .def = 127,
+ .step = 1,
+ }, {
+ .ops = &s5k6aa_ctrl_ops,
+ .id = V4L2_CID_GREEN_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain, Green",
+ .min = 0,
+ .max = 256,
+ .def = 127,
+ .step = 1,
+ }, {
+ .ops = &s5k6aa_ctrl_ops,
+ .id = V4L2_CID_BLUE_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain, Blue",
+ .min = 0,
+ .max = 256,
+ .def = 127,
+ .step = 1,
+ },
+};
+
+static int s5k6aa_initialize_ctrls(struct s5k6aa *s5k6aa)
+{
+ const struct v4l2_ctrl_ops *ops = &s5k6aa_ctrl_ops;
+ struct s5k6aa_ctrls *ctrls = &s5k6aa->ctrls;
+ struct v4l2_ctrl_handler *hdl = &ctrls->handler;
+
+ int ret = v4l2_ctrl_handler_init(hdl, 16);
+ if (ret)
+ return ret;
+ /* Auto white balance cluster */
+ ctrls->awb = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTO_WHITE_BALANCE,
+ 0, 1, 1, 1);
+ ctrls->gain_red = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[0], NULL);
+ ctrls->gain_green = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[1], NULL);
+ ctrls->gain_blue = v4l2_ctrl_new_custom(hdl, &s5k6aa_ctrls[2], NULL);
+ v4l2_ctrl_auto_cluster(4, &ctrls->awb, 0, false);
+
+ ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
+ ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_cluster(2, &ctrls->hflip);
+
+ ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
+ V4L2_CID_EXPOSURE_AUTO,
+ V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
+ /* Exposure time: x 1 us */
+ ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
+ 0, 6000000U, 1, 100000U);
+ /* Total gain: 256 <=> 1x */
+ ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN,
+ 0, 256, 1, 256);
+ v4l2_ctrl_auto_cluster(3, &ctrls->auto_exp, 0, false);
+
+ v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_POWER_LINE_FREQUENCY,
+ V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
+ V4L2_CID_POWER_LINE_FREQUENCY_AUTO);
+
+ v4l2_ctrl_new_std_menu(hdl, ops, V4L2_CID_COLORFX,
+ V4L2_COLORFX_SKY_BLUE, ~0x6f, V4L2_COLORFX_NONE);
+
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_WHITE_BALANCE_TEMPERATURE,
+ 0, 256, 1, 0);
+
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION, -127, 127, 1, 0);
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -127, 127, 1, 0);
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -127, 127, 1, 0);
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SHARPNESS, -127, 127, 1, 0);
+
+ if (hdl->error) {
+ ret = hdl->error;
+ v4l2_ctrl_handler_free(hdl);
+ return ret;
+ }
+
+ s5k6aa->sd.ctrl_handler = hdl;
+ return 0;
+}
+
+/*
+ * V4L2 subdev internal operations
+ */
+static int s5k6aa_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0);
+ struct v4l2_rect *crop = v4l2_subdev_get_try_crop(fh, 0);
+
+ format->colorspace = s5k6aa_formats[0].colorspace;
+ format->code = s5k6aa_formats[0].code;
+ format->width = S5K6AA_OUT_WIDTH_DEF;
+ format->height = S5K6AA_OUT_HEIGHT_DEF;
+ format->field = V4L2_FIELD_NONE;
+
+ crop->width = S5K6AA_WIN_WIDTH_MAX;
+ crop->height = S5K6AA_WIN_HEIGHT_MAX;
+ crop->left = 0;
+ crop->top = 0;
+
+ return 0;
+}
+
+int s5k6aa_check_fw_revision(struct s5k6aa *s5k6aa)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&s5k6aa->sd);
+ u16 api_ver = 0, fw_rev = 0;
+
+ int ret = s5k6aa_set_ahb_address(client);
+
+ if (!ret)
+ ret = s5k6aa_read(client, REG_FW_APIVER, &api_ver);
+ if (!ret)
+ ret = s5k6aa_read(client, REG_FW_REVISION, &fw_rev);
+ if (ret) {
+ v4l2_err(&s5k6aa->sd, "FW revision check failed!\n");
+ return ret;
+ }
+
+ v4l2_info(&s5k6aa->sd, "FW API ver.: 0x%X, FW rev.: 0x%X\n",
+ api_ver, fw_rev);
+
+ return api_ver == S5K6AAFX_FW_APIVER ? 0 : -ENODEV;
+}
+
+static int s5k6aa_registered(struct v4l2_subdev *sd)
+{
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+ int ret;
+
+ mutex_lock(&s5k6aa->lock);
+ ret = __s5k6aa_power_on(s5k6aa);
+ if (!ret) {
+ msleep(100);
+ ret = s5k6aa_check_fw_revision(s5k6aa);
+ __s5k6aa_power_off(s5k6aa);
+ }
+ mutex_unlock(&s5k6aa->lock);
+
+ return ret;
+}
+
+static const struct v4l2_subdev_internal_ops s5k6aa_subdev_internal_ops = {
+ .registered = s5k6aa_registered,
+ .open = s5k6aa_open,
+};
+
+static const struct v4l2_subdev_core_ops s5k6aa_core_ops = {
+ .s_power = s5k6aa_set_power,
+ .log_status = s5k6aa_log_status,
+};
+
+static const struct v4l2_subdev_ops s5k6aa_subdev_ops = {
+ .core = &s5k6aa_core_ops,
+ .pad = &s5k6aa_pad_ops,
+ .video = &s5k6aa_video_ops,
+};
+
+/*
+ * GPIO setup
+ */
+static int s5k6aa_configure_gpio(int nr, int val, const char *name)
+{
+ unsigned long flags = val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+ int ret;
+
+ if (!gpio_is_valid(nr))
+ return 0;
+ ret = gpio_request_one(nr, flags, name);
+ if (!ret)
+ gpio_export(nr, 0);
+ return ret;
+}
+
+static void s5k6aa_free_gpios(struct s5k6aa *s5k6aa)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(s5k6aa->gpio); i++) {
+ if (!gpio_is_valid(s5k6aa->gpio[i].gpio))
+ continue;
+ gpio_free(s5k6aa->gpio[i].gpio);
+ s5k6aa->gpio[i].gpio = -EINVAL;
+ }
+}
+
+static int s5k6aa_configure_gpios(struct s5k6aa *s5k6aa,
+ const struct s5k6aa_platform_data *pdata)
+{
+ const struct s5k6aa_gpio *gpio = &pdata->gpio_stby;
+ int ret;
+
+ s5k6aa->gpio[STBY].gpio = -EINVAL;
+ s5k6aa->gpio[RST].gpio = -EINVAL;
+
+ ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_STBY");
+ if (ret) {
+ s5k6aa_free_gpios(s5k6aa);
+ return ret;
+ }
+ s5k6aa->gpio[STBY] = *gpio;
+ if (gpio_is_valid(gpio->gpio))
+ gpio_set_value(gpio->gpio, 0);
+
+ gpio = &pdata->gpio_reset;
+ ret = s5k6aa_configure_gpio(gpio->gpio, gpio->level, "S5K6AA_RST");
+ if (ret) {
+ s5k6aa_free_gpios(s5k6aa);
+ return ret;
+ }
+ s5k6aa->gpio[RST] = *gpio;
+ if (gpio_is_valid(gpio->gpio))
+ gpio_set_value(gpio->gpio, 0);
+
+ return 0;
+}
+
+static int s5k6aa_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct s5k6aa_platform_data *pdata = client->dev.platform_data;
+ struct v4l2_subdev *sd;
+ struct s5k6aa *s5k6aa;
+ int i, ret;
+
+ if (pdata == NULL) {
+ dev_err(&client->dev, "Platform data not specified\n");
+ return -EINVAL;
+ }
+
+ if (pdata->mclk_frequency == 0) {
+ dev_err(&client->dev, "MCLK frequency not specified\n");
+ return -EINVAL;
+ }
+
+ s5k6aa = kzalloc(sizeof(*s5k6aa), GFP_KERNEL);
+ if (!s5k6aa)
+ return -ENOMEM;
+
+ mutex_init(&s5k6aa->lock);
+
+ s5k6aa->mclk_frequency = pdata->mclk_frequency;
+ s5k6aa->bus_type = pdata->bus_type;
+ s5k6aa->mipi_lanes = pdata->nlanes;
+ s5k6aa->s_power = pdata->set_power;
+ s5k6aa->inv_hflip = pdata->horiz_flip;
+ s5k6aa->inv_vflip = pdata->vert_flip;
+
+ sd = &s5k6aa->sd;
+ strlcpy(sd->name, DRIVER_NAME, sizeof(sd->name));
+ v4l2_i2c_subdev_init(sd, client, &s5k6aa_subdev_ops);
+
+ sd->internal_ops = &s5k6aa_subdev_internal_ops;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ s5k6aa->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;
+ ret = media_entity_init(&sd->entity, 1, &s5k6aa->pad, 0);
+ if (ret)
+ goto out_err1;
+
+ ret = s5k6aa_configure_gpios(s5k6aa, pdata);
+ if (ret)
+ goto out_err2;
+
+ for (i = 0; i < S5K6AA_NUM_SUPPLIES; i++)
+ s5k6aa->supplies[i].supply = s5k6aa_supply_names[i];
+
+ ret = regulator_bulk_get(&client->dev, S5K6AA_NUM_SUPPLIES,
+ s5k6aa->supplies);
+ if (ret) {
+ dev_err(&client->dev, "Failed to get regulators\n");
+ goto out_err3;
+ }
+
+ ret = s5k6aa_initialize_ctrls(s5k6aa);
+ if (ret)
+ goto out_err4;
+
+ s5k6aa_presets_data_init(s5k6aa);
+
+ s5k6aa->ccd_rect.width = S5K6AA_WIN_WIDTH_MAX;
+ s5k6aa->ccd_rect.height = S5K6AA_WIN_HEIGHT_MAX;
+ s5k6aa->ccd_rect.left = 0;
+ s5k6aa->ccd_rect.top = 0;
+
+ return 0;
+
+out_err4:
+ regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+out_err3:
+ s5k6aa_free_gpios(s5k6aa);
+out_err2:
+ media_entity_cleanup(&s5k6aa->sd.entity);
+out_err1:
+ kfree(s5k6aa);
+ return ret;
+}
+
+static int s5k6aa_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct s5k6aa *s5k6aa = to_s5k6aa(sd);
+
+ v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
+ media_entity_cleanup(&sd->entity);
+ regulator_bulk_free(S5K6AA_NUM_SUPPLIES, s5k6aa->supplies);
+ s5k6aa_free_gpios(s5k6aa);
+ kfree(s5k6aa);
+
+ return 0;
+}
+
+static const struct i2c_device_id s5k6aa_id[] = {
+ { DRIVER_NAME, 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, s5k6aa_id);
+
+
+static struct i2c_driver s5k6aa_i2c_driver = {
+ .driver = {
+ .name = DRIVER_NAME
+ },
+ .probe = s5k6aa_probe,
+ .remove = s5k6aa_remove,
+ .id_table = s5k6aa_id,
+};
+
+static int __init s5k6aa_init(void)
+{
+ return i2c_add_driver(&s5k6aa_i2c_driver);
+}
+
+static void __exit s5k6aa_exit(void)
+{
+ i2c_del_driver(&s5k6aa_i2c_driver);
+}
+
+module_init(s5k6aa_init);
+module_exit(s5k6aa_exit);
+
+MODULE_DESCRIPTION("Samsung S5K6AA(FX) SXGA camera driver");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index 931f469..c8d91b0 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -246,9 +246,9 @@
return fr->f_width * fr->f_height * fr->fmt->depth[plane] / 8;
}
-static int queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
- unsigned int *num_planes, unsigned int sizes[],
- void *allocators[])
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *pfmt,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], void *allocators[])
{
struct fimc_ctx *ctx = vq->drv_priv;
struct fimc_fmt *fmt = ctx->d_frame.fmt;
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 6c1c9cb..19ca6db 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -670,9 +670,9 @@
fimc_m2m_shutdown(priv);
}
-static int fimc_queue_setup(struct vb2_queue *vq, unsigned int *num_buffers,
- unsigned int *num_planes, unsigned int sizes[],
- void *allocators[])
+static int fimc_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], void *allocators[])
{
struct fimc_ctx *ctx = vb2_get_drv_priv(vq);
struct fimc_frame *f;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
index 5f4da80..f2481a8 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
@@ -38,7 +38,7 @@
* into kernel. */
mfc_debug_enter();
err = request_firmware((const struct firmware **)&fw_blob,
- "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+ "s5p-mfc.fw", dev->v4l2_dev.dev);
if (err != 0) {
mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
return -EINVAL;
@@ -116,7 +116,7 @@
* into kernel. */
mfc_debug_enter();
err = request_firmware((const struct firmware **)&fw_blob,
- "s5pc110-mfc.fw", dev->v4l2_dev.dev);
+ "s5p-mfc.fw", dev->v4l2_dev.dev);
if (err != 0) {
mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
return -EINVAL;
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
index bfbe084..725634d 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_dec.c
@@ -744,9 +744,10 @@
.vidioc_g_crop = vidioc_g_crop,
};
-static int s5p_mfc_queue_setup(struct vb2_queue *vq, unsigned int *buf_count,
- unsigned int *plane_count, unsigned int psize[],
- void *allocators[])
+static int s5p_mfc_queue_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt, unsigned int *buf_count,
+ unsigned int *plane_count, unsigned int psize[],
+ void *allocators[])
{
struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
index 4c90e53..ecef127 100644
--- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c
@@ -1513,8 +1513,9 @@
}
static int s5p_mfc_queue_setup(struct vb2_queue *vq,
- unsigned int *buf_count, unsigned int *plane_count,
- unsigned int psize[], void *allocators[])
+ const struct v4l2_format *fmt,
+ unsigned int *buf_count, unsigned int *plane_count,
+ unsigned int psize[], void *allocators[])
{
struct s5p_mfc_ctx *ctx = fh_to_ctx(vq->drv_priv);
diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c
index 4917e2c..e16d3a4 100644
--- a/drivers/media/video/s5p-tv/mixer_video.c
+++ b/drivers/media/video/s5p-tv/mixer_video.c
@@ -727,8 +727,8 @@
.unlocked_ioctl = video_ioctl2,
};
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned int sizes[],
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *pfmt,
+ unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[],
void *alloc_ctxs[])
{
struct mxr_layer *layer = vb2_get_drv_priv(vq);
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index bc8d6bb..9b55068 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -843,10 +843,10 @@
int saa7134_ir_start(struct saa7134_dev *dev);
void saa7134_ir_stop(struct saa7134_dev *dev);
#else
-#define saa7134_input_init1(dev) (0)
-#define saa7134_input_fini(dev) (0)
-#define saa7134_input_irq(dev) (0)
-#define saa7134_probe_i2c_ir(dev) (0)
-#define saa7134_ir_start(dev) (0)
-#define saa7134_ir_stop(dev) (0)
+#define saa7134_input_init1(dev) ((void)0)
+#define saa7134_input_fini(dev) ((void)0)
+#define saa7134_input_irq(dev) ((void)0)
+#define saa7134_probe_i2c_ir(dev) ((void)0)
+#define saa7134_ir_start(dev) ((void)0)
+#define saa7134_ir_stop(dev) ((void)0)
#endif
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 8615fb8..f390682 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -90,7 +90,6 @@
struct sh_mobile_ceu_buffer {
struct vb2_buffer vb; /* v4l buffer must be first */
struct list_head queue;
- enum v4l2_mbus_pixelcode code;
};
struct sh_mobile_ceu_dev {
@@ -100,7 +99,8 @@
unsigned int irq;
void __iomem *base;
- unsigned long video_limit;
+ size_t video_limit;
+ size_t buf_total;
spinlock_t lock; /* Protects video buffer lists */
struct list_head capture;
@@ -121,7 +121,7 @@
};
struct sh_mobile_ceu_cam {
- /* CEU offsets within scaled by the CEU camera output */
+ /* CEU offsets within the camera output, before the CEU scaler */
unsigned int ceu_left;
unsigned int ceu_top;
/* Client output, as seen by the CEU */
@@ -144,30 +144,6 @@
return container_of(vb, struct sh_mobile_ceu_buffer, vb);
}
-static unsigned long make_bus_param(struct sh_mobile_ceu_dev *pcdev)
-{
- unsigned long flags;
-
- flags = SOCAM_MASTER |
- SOCAM_PCLK_SAMPLE_RISING |
- SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH;
-
- if (pcdev->pdata->flags & SH_CEU_FLAG_USE_8BIT_BUS)
- flags |= SOCAM_DATAWIDTH_8;
-
- if (pcdev->pdata->flags & SH_CEU_FLAG_USE_16BIT_BUS)
- flags |= SOCAM_DATAWIDTH_16;
-
- if (flags & SOCAM_DATAWIDTH_MASK)
- return flags;
-
- return 0;
-}
-
static void ceu_write(struct sh_mobile_ceu_dev *priv,
unsigned long reg_offs, u32 data)
{
@@ -216,33 +192,61 @@
/*
* Videobuf operations
*/
+
+/*
+ * .queue_setup() is called to check, whether the driver can accept the
+ * requested number of buffers and to fill in plane sizes
+ * for the current frame format if required
+ */
static int sh_mobile_ceu_videobuf_setup(struct vb2_queue *vq,
+ const struct v4l2_format *fmt,
unsigned int *count, unsigned int *num_planes,
unsigned int sizes[], void *alloc_ctxs[])
{
struct soc_camera_device *icd = container_of(vq, struct soc_camera_device, vb2_vidq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
+ int bytes_per_line;
+ unsigned int height;
+ if (fmt) {
+ const struct soc_camera_format_xlate *xlate = soc_camera_xlate_by_fourcc(icd,
+ fmt->fmt.pix.pixelformat);
+ if (!xlate)
+ return -EINVAL;
+ bytes_per_line = soc_mbus_bytes_per_line(fmt->fmt.pix.width,
+ xlate->host_fmt);
+ height = fmt->fmt.pix.height;
+ } else {
+ /* Called from VIDIOC_REQBUFS or in compatibility mode */
+ bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+ height = icd->user_height;
+ }
if (bytes_per_line < 0)
return bytes_per_line;
- *num_planes = 1;
+ sizes[0] = bytes_per_line * height;
- pcdev->sequence = 0;
- sizes[0] = bytes_per_line * icd->user_height;
alloc_ctxs[0] = pcdev->alloc_ctx;
+ if (!vq->num_buffers)
+ pcdev->sequence = 0;
+
if (!*count)
*count = 2;
- if (pcdev->video_limit) {
- if (PAGE_ALIGN(sizes[0]) * *count > pcdev->video_limit)
- *count = pcdev->video_limit / PAGE_ALIGN(sizes[0]);
+ /* If *num_planes != 0, we have already verified *count. */
+ if (pcdev->video_limit && !*num_planes) {
+ size_t size = PAGE_ALIGN(sizes[0]) * *count;
+
+ if (size + pcdev->buf_total > pcdev->video_limit)
+ *count = (pcdev->video_limit - pcdev->buf_total) /
+ PAGE_ALIGN(sizes[0]);
}
+ *num_planes = 1;
+
dev_dbg(icd->parent, "count=%d, size=%u\n", *count, sizes[0]);
return 0;
@@ -267,6 +271,7 @@
unsigned long top1, top2;
unsigned long bottom1, bottom2;
u32 status;
+ bool planar;
int ret = 0;
/*
@@ -314,17 +319,29 @@
phys_addr_top = vb2_dma_contig_plane_dma_addr(pcdev->active, 0);
- ceu_write(pcdev, top1, phys_addr_top);
- if (V4L2_FIELD_NONE != pcdev->field) {
- phys_addr_bottom = phys_addr_top + icd->user_width;
- ceu_write(pcdev, bottom1, phys_addr_bottom);
- }
-
switch (icd->current_fmt->host_fmt->fourcc) {
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
+ planar = true;
+ break;
+ default:
+ planar = false;
+ }
+
+ ceu_write(pcdev, top1, phys_addr_top);
+ if (V4L2_FIELD_NONE != pcdev->field) {
+ if (planar)
+ phys_addr_bottom = phys_addr_top + icd->user_width;
+ else
+ phys_addr_bottom = phys_addr_top +
+ soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+ ceu_write(pcdev, bottom1, phys_addr_bottom);
+ }
+
+ if (planar) {
phys_addr_top += icd->user_width *
icd->user_height;
ceu_write(pcdev, top2, phys_addr_top);
@@ -341,44 +358,11 @@
static int sh_mobile_ceu_videobuf_prepare(struct vb2_buffer *vb)
{
- struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
- struct sh_mobile_ceu_buffer *buf;
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
- icd->current_fmt->host_fmt);
- unsigned long size;
-
- if (bytes_per_line < 0)
- return bytes_per_line;
-
- buf = to_ceu_vb(vb);
-
- dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
- vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
+ struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
/* Added list head initialization on alloc */
WARN(!list_empty(&buf->queue), "Buffer %p on queue!\n", vb);
-#ifdef DEBUG
- /*
- * This can be useful if you want to see if we actually fill
- * the buffer with something
- */
- if (vb2_plane_vaddr(vb, 0))
- memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
-#endif
-
- BUG_ON(NULL == icd->current_fmt);
-
- size = icd->user_height * bytes_per_line;
-
- if (vb2_plane_size(vb, 0) < size) {
- dev_err(icd->parent, "Buffer too small (%lu < %lu)\n",
- vb2_plane_size(vb, 0), size);
- return -ENOBUFS;
- }
-
- vb2_set_plane_payload(vb, 0, size);
-
return 0;
}
@@ -388,10 +372,35 @@
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vb);
+ unsigned long size;
+ int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ icd->current_fmt->host_fmt);
+
+ if (bytes_per_line < 0)
+ goto error;
+
+ size = icd->user_height * bytes_per_line;
+
+ if (vb2_plane_size(vb, 0) < size) {
+ dev_err(icd->parent, "Buffer #%d too small (%lu < %lu)\n",
+ vb->v4l2_buf.index, vb2_plane_size(vb, 0), size);
+ goto error;
+ }
+
+ vb2_set_plane_payload(vb, 0, size);
dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
+#ifdef DEBUG
+ /*
+ * This can be useful if you want to see if we actually fill
+ * the buffer with something
+ */
+ if (vb2_plane_vaddr(vb, 0))
+ memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
+#endif
+
spin_lock_irq(&pcdev->lock);
list_add_tail(&buf->queue, &pcdev->capture);
@@ -405,6 +414,11 @@
sh_mobile_ceu_capture(pcdev);
}
spin_unlock_irq(&pcdev->lock);
+
+ return;
+
+error:
+ vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
}
static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
@@ -429,11 +443,23 @@
if (buf->queue.next)
list_del_init(&buf->queue);
+ pcdev->buf_total -= PAGE_ALIGN(vb2_plane_size(vb, 0));
+ dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__,
+ pcdev->buf_total);
+
spin_unlock_irq(&pcdev->lock);
}
static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb)
{
+ struct soc_camera_device *icd = container_of(vb->vb2_queue, struct soc_camera_device, vb2_vidq);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+ struct sh_mobile_ceu_dev *pcdev = ici->priv;
+
+ pcdev->buf_total += PAGE_ALIGN(vb2_plane_size(vb, 0));
+ dev_dbg(icd->parent, "%s() %zu bytes buffers\n", __func__,
+ pcdev->buf_total);
+
/* This is for locking debugging only */
INIT_LIST_HEAD(&to_ceu_vb(vb)->queue);
return 0;
@@ -535,19 +561,29 @@
pm_runtime_get_sync(ici->v4l2_dev.dev);
+ pcdev->buf_total = 0;
+
ret = sh_mobile_ceu_soft_reset(pcdev);
csi2_sd = find_csi2(pcdev);
+ if (csi2_sd)
+ csi2_sd->grp_id = (long)icd;
ret = v4l2_subdev_call(csi2_sd, core, s_power, 1);
- if (ret != -ENODEV && ret != -ENOIOCTLCMD && ret < 0) {
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
pm_runtime_put_sync(ici->v4l2_dev.dev);
- } else {
- pcdev->icd = icd;
- ret = 0;
+ return ret;
}
- return ret;
+ /*
+ * -ENODEV is special: either csi2_sd == NULL or the CSI-2 driver
+ * has not found this soc-camera device among its clients
+ */
+ if (ret == -ENODEV && csi2_sd)
+ csi2_sd->grp_id = 0;
+ pcdev->icd = icd;
+
+ return 0;
}
/* Called with .video_lock held */
@@ -560,6 +596,8 @@
BUG_ON(icd != pcdev->icd);
v4l2_subdev_call(csi2_sd, core, s_power, 0);
+ if (csi2_sd)
+ csi2_sd->grp_id = 0;
/* disable capture, disable interrupts */
ceu_write(pcdev, CEIER, 0);
sh_mobile_ceu_soft_reset(pcdev);
@@ -628,22 +666,22 @@
left_offset = cam->ceu_left;
top_offset = cam->ceu_top;
- /* CEU cropping (CFSZR) is applied _after_ the scaling filter (CFLCR) */
+ WARN_ON(icd->user_width & 3 || icd->user_height & 3);
+
+ width = icd->user_width;
+
if (pcdev->image_mode) {
in_width = cam->width;
if (!pcdev->is_16bit) {
in_width *= 2;
left_offset *= 2;
}
- width = icd->user_width;
- cdwdr_width = icd->user_width;
+ cdwdr_width = width;
} else {
- int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
+ int bytes_per_line = soc_mbus_bytes_per_line(width,
icd->current_fmt->host_fmt);
unsigned int w_factor;
- width = icd->user_width;
-
switch (icd->current_fmt->host_fmt->packing) {
case SOC_MBUS_PACKING_2X8_PADHI:
w_factor = 2;
@@ -653,10 +691,10 @@
}
in_width = cam->width * w_factor;
- left_offset = left_offset * w_factor;
+ left_offset *= w_factor;
if (bytes_per_line < 0)
- cdwdr_width = icd->user_width;
+ cdwdr_width = width;
else
cdwdr_width = bytes_per_line;
}
@@ -664,7 +702,7 @@
height = icd->user_height;
in_height = cam->height;
if (V4L2_FIELD_NONE != pcdev->field) {
- height /= 2;
+ height = (height / 2) & ~3;
in_height /= 2;
top_offset /= 2;
cdwdr_width *= 2;
@@ -686,6 +724,7 @@
ceu_write(pcdev, CAMOR, camor);
ceu_write(pcdev, CAPWR, (in_height << 16) | in_width);
+ /* CFSZR clipping is applied _after_ the scaling filter (CFLCR) */
ceu_write(pcdev, CFSZR, (height << 16) | width);
ceu_write(pcdev, CDWDR, cdwdr_width);
}
@@ -723,66 +762,93 @@
ceu_write(pcdev, CAPSR, capsr);
}
+/* Find the bus subdevice driver, e.g., CSI2 */
+static struct v4l2_subdev *find_bus_subdev(struct sh_mobile_ceu_dev *pcdev,
+ struct soc_camera_device *icd)
+{
+ if (pcdev->csi2_pdev) {
+ struct v4l2_subdev *csi2_sd = find_csi2(pcdev);
+ if (csi2_sd && csi2_sd->grp_id == (u32)icd)
+ return csi2_sd;
+ }
+
+ return soc_camera_to_subdev(icd);
+}
+
+#define CEU_BUS_FLAGS (V4L2_MBUS_MASTER | \
+ V4L2_MBUS_PCLK_SAMPLE_RISING | \
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_HSYNC_ACTIVE_LOW | \
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
+ V4L2_MBUS_VSYNC_ACTIVE_LOW | \
+ V4L2_MBUS_DATA_ACTIVE_HIGH)
+
/* Capture is not running, no interrupts, no locking needed */
static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
__u32 pixfmt)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
- int ret;
- unsigned long camera_flags, common_flags, value;
- int yuv_lineskip;
+ struct v4l2_subdev *sd = find_bus_subdev(pcdev, icd);
struct sh_mobile_ceu_cam *cam = icd->host_priv;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ unsigned long value, common_flags = CEU_BUS_FLAGS;
u32 capsr = capture_save_reset(pcdev);
+ unsigned int yuv_lineskip;
+ int ret;
- camera_flags = icd->ops->query_bus_param(icd);
- common_flags = soc_camera_bus_param_compatible(camera_flags,
- make_bus_param(pcdev));
- if (!common_flags)
- return -EINVAL;
+ /*
+ * If the client doesn't implement g_mbus_config, we just use our
+ * platform data
+ */
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret) {
+ common_flags = soc_mbus_config_compatible(&cfg,
+ common_flags);
+ if (!common_flags)
+ return -EINVAL;
+ } else if (ret != -ENOIOCTLCMD) {
+ return ret;
+ }
/* Make choises, based on platform preferences */
- if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
if (pcdev->pdata->flags & SH_CEU_FLAG_HSYNC_LOW)
- common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
}
- if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
- (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
+ if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
+ (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
if (pcdev->pdata->flags & SH_CEU_FLAG_VSYNC_LOW)
- common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
else
- common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
+ common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
}
- ret = icd->ops->set_bus_param(icd, common_flags);
- if (ret < 0)
+ cfg.flags = common_flags;
+ ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
return ret;
- switch (common_flags & SOCAM_DATAWIDTH_MASK) {
- case SOCAM_DATAWIDTH_8:
- pcdev->is_16bit = 0;
- break;
- case SOCAM_DATAWIDTH_16:
+ if (icd->current_fmt->host_fmt->bits_per_sample > 8)
pcdev->is_16bit = 1;
- break;
- default:
- return -EINVAL;
- }
+ else
+ pcdev->is_16bit = 0;
ceu_write(pcdev, CRCNTR, 0);
ceu_write(pcdev, CRCMPR, 0);
value = 0x00000010; /* data fetch by default */
- yuv_lineskip = 0;
+ yuv_lineskip = 0x10;
switch (icd->current_fmt->host_fmt->fourcc) {
case V4L2_PIX_FMT_NV12:
case V4L2_PIX_FMT_NV21:
- yuv_lineskip = 1; /* skip for NV12/21, no skip for NV16/61 */
+ /* convert 4:2:2 -> 4:2:0 */
+ yuv_lineskip = 0; /* skip for NV12/21, no skip for NV16/61 */
/* fall-through */
case V4L2_PIX_FMT_NV16:
case V4L2_PIX_FMT_NV61:
@@ -808,8 +874,8 @@
icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV61)
value ^= 0x00000100; /* swap U, V to change from NV1x->NVx1 */
- value |= common_flags & SOCAM_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
- value |= common_flags & SOCAM_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
+ value |= common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW ? 1 << 1 : 0;
+ value |= common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW ? 1 << 0 : 0;
value |= pcdev->is_16bit ? 1 << 12 : 0;
/* CSI2 mode */
@@ -852,9 +918,7 @@
* using 7 we swap the data bytes to match the incoming order:
* D0, D1, D2, D3, D4, D5, D6, D7
*/
- value = 0x00000017;
- if (yuv_lineskip)
- value &= ~0x00000010; /* convert 4:2:2 -> 4:2:0 */
+ value = 0x00000007 | yuv_lineskip;
ceu_write(pcdev, CDOCR, value);
ceu_write(pcdev, CFWCR, 0); /* keep "datafetch firewall" disabled */
@@ -875,13 +939,19 @@
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
- unsigned long camera_flags, common_flags;
+ struct v4l2_subdev *sd = find_bus_subdev(pcdev, icd);
+ unsigned long common_flags = CEU_BUS_FLAGS;
+ struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
+ int ret;
- camera_flags = icd->ops->query_bus_param(icd);
- common_flags = soc_camera_bus_param_compatible(camera_flags,
- make_bus_param(pcdev));
- if (!common_flags || buswidth > 16 ||
- (buswidth > 8 && !(common_flags & SOCAM_DATAWIDTH_16)))
+ ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
+ if (!ret)
+ common_flags = soc_mbus_config_compatible(&cfg,
+ common_flags);
+ else if (ret != -ENOIOCTLCMD)
+ return ret;
+
+ if (!common_flags || buswidth > 16)
return -EINVAL;
return 0;
@@ -891,26 +961,26 @@
{
.fourcc = V4L2_PIX_FMT_NV12,
.name = "NV12",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_NONE,
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_1_5X8,
.order = SOC_MBUS_ORDER_LE,
}, {
.fourcc = V4L2_PIX_FMT_NV21,
.name = "NV21",
- .bits_per_sample = 12,
- .packing = SOC_MBUS_PACKING_NONE,
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_1_5X8,
.order = SOC_MBUS_ORDER_LE,
}, {
.fourcc = V4L2_PIX_FMT_NV16,
.name = "NV16",
- .bits_per_sample = 16,
- .packing = SOC_MBUS_PACKING_NONE,
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
}, {
.fourcc = V4L2_PIX_FMT_NV61,
.name = "NV61",
- .bits_per_sample = 16,
- .packing = SOC_MBUS_PACKING_NONE,
+ .bits_per_sample = 8,
+ .packing = SOC_MBUS_PACKING_2X8_PADHI,
.order = SOC_MBUS_ORDER_LE,
},
};
@@ -920,6 +990,8 @@
{
return fmt->packing == SOC_MBUS_PACKING_NONE ||
(fmt->bits_per_sample == 8 &&
+ fmt->packing == SOC_MBUS_PACKING_1_5X8) ||
+ (fmt->bits_per_sample == 8 &&
fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
(fmt->bits_per_sample > 8 &&
fmt->packing == SOC_MBUS_PACKING_EXTEND16);
@@ -927,6 +999,38 @@
static int client_g_rect(struct v4l2_subdev *sd, struct v4l2_rect *rect);
+static struct soc_camera_device *ctrl_to_icd(struct v4l2_ctrl *ctrl)
+{
+ return container_of(ctrl->handler, struct soc_camera_device,
+ ctrl_handler);
+}
+
+static int sh_mobile_ceu_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ struct soc_camera_device *icd = ctrl_to_icd(ctrl);
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+ struct sh_mobile_ceu_dev *pcdev = ici->priv;
+
+ switch (ctrl->id) {
+ case V4L2_CID_SHARPNESS:
+ switch (icd->current_fmt->host_fmt->fourcc) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ ceu_write(pcdev, CLFCR, !ctrl->val);
+ return 0;
+ }
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops sh_mobile_ceu_ctrl_ops = {
+ .s_ctrl = sh_mobile_ceu_s_ctrl,
+};
+
static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int idx,
struct soc_camera_format_xlate *xlate)
{
@@ -952,6 +1056,7 @@
}
if (!pcdev->pdata->csi2) {
+ /* Are there any restrictions in the CSI-2 case? */
ret = sh_mobile_ceu_try_bus_param(icd, fmt->bits_per_sample);
if (ret < 0)
return 0;
@@ -962,6 +1067,12 @@
struct v4l2_rect rect;
int shift = 0;
+ /* Add our control */
+ v4l2_ctrl_new_std(&icd->ctrl_handler, &sh_mobile_ceu_ctrl_ops,
+ V4L2_CID_SHARPNESS, 0, 1, 1, 0);
+ if (icd->ctrl_handler.error)
+ return icd->ctrl_handler.error;
+
/* FIXME: subwindow is lost between close / open */
/* Cache current client geometry */
@@ -1004,9 +1115,6 @@
cam->width = mf.width;
cam->height = mf.height;
- cam->width = mf.width;
- cam->height = mf.height;
-
icd->host_priv = cam;
} else {
cam = icd->host_priv;
@@ -1278,6 +1386,7 @@
unsigned int width = mf->width, height = mf->height, tmp_w, tmp_h;
unsigned int max_width, max_height;
struct v4l2_cropcap cap;
+ bool ceu_1to1;
int ret;
ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video,
@@ -1287,7 +1396,14 @@
dev_geo(dev, "camera scaled to %ux%u\n", mf->width, mf->height);
- if ((width == mf->width && height == mf->height) || !ceu_can_scale)
+ if (width == mf->width && height == mf->height) {
+ /* Perfect! The client has done it all. */
+ ceu_1to1 = true;
+ goto update_cache;
+ }
+
+ ceu_1to1 = false;
+ if (!ceu_can_scale)
goto update_cache;
cap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
@@ -1327,7 +1443,10 @@
if (ret < 0)
return ret;
- update_subrect(cam);
+ if (ceu_1to1)
+ cam->subrect = cam->rect;
+ else
+ update_subrect(cam);
return 0;
}
@@ -1414,7 +1533,10 @@
capsr = capture_save_reset(pcdev);
dev_dbg(dev, "CAPSR 0x%x, CFLCR 0x%x\n", capsr, pcdev->cflcr);
- /* 1. - 2. Apply iterative camera S_CROP for new input window. */
+ /*
+ * 1. - 2. Apply iterative camera S_CROP for new input window, read back
+ * actual camera rectangle.
+ */
ret = client_s_crop(icd, a, &cam_crop);
if (ret < 0)
return ret;
@@ -1498,8 +1620,9 @@
ceu_write(pcdev, CFLCR, cflcr);
}
- icd->user_width = out_width;
- icd->user_height = out_height;
+ icd->user_width = out_width & ~3;
+ icd->user_height = out_height & ~3;
+ /* Offsets are applied at the CEU scaling filter input */
cam->ceu_left = scale_down(rect->left - cam_rect->left, scale_cam_h) & ~1;
cam->ceu_top = scale_down(rect->top - cam_rect->top, scale_cam_v) & ~1;
@@ -1538,7 +1661,7 @@
* CEU crop, mapped backed onto the client input (subrect).
*/
static void calculate_client_output(struct soc_camera_device *icd,
- struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
+ const struct v4l2_pix_format *pix, struct v4l2_mbus_framefmt *mf)
{
struct sh_mobile_ceu_cam *cam = icd->host_priv;
struct device *dev = icd->parent;
@@ -1574,8 +1697,8 @@
dev_geo(dev, "3: scales %u:%u\n", scale_h, scale_v);
/*
- * 4. Calculate client output window by applying combined scales to real
- * input window.
+ * 4. Calculate desired client output window by applying combined scales
+ * to client (real) input window.
*/
mf->width = scale_down(cam->rect.width, scale_h);
mf->height = scale_down(cam->rect.height, scale_v);
@@ -1600,8 +1723,6 @@
bool image_mode;
enum v4l2_field field;
- dev_geo(dev, "S_FMT(pix=0x%x, %ux%u)\n", pixfmt, pix->width, pix->height);
-
switch (pix->field) {
default:
pix->field = V4L2_FIELD_NONE;
@@ -1622,8 +1743,8 @@
return -EINVAL;
}
- /* 1.-4. Calculate client output geometry */
- calculate_client_output(icd, &f->fmt.pix, &mf);
+ /* 1.-4. Calculate desired client output geometry */
+ calculate_client_output(icd, pix, &mf);
mf.field = pix->field;
mf.colorspace = pix->colorspace;
mf.code = xlate->code;
@@ -1639,6 +1760,9 @@
image_mode = false;
}
+ dev_geo(dev, "S_FMT(pix=0x%x, fld 0x%x, code 0x%x, %ux%u)\n", pixfmt, mf.field, mf.code,
+ pix->width, pix->height);
+
dev_geo(dev, "4: request camera output %ux%u\n", mf.width, mf.height);
/* 5. - 9. */
@@ -1700,6 +1824,10 @@
pcdev->field = field;
pcdev->image_mode = image_mode;
+ /* CFSZR requirement */
+ pix->width &= ~3;
+ pix->height &= ~3;
+
return 0;
}
@@ -1725,7 +1853,8 @@
/* FIXME: calculate using depth and bus width */
- v4l_bound_align_image(&pix->width, 2, 2560, 1,
+ /* CFSZR requires height and width to be 4-pixel aligned */
+ v4l_bound_align_image(&pix->width, 2, 2560, 2,
&pix->height, 4, 1920, 2, 0);
width = pix->width;
@@ -1778,6 +1907,9 @@
pix->height = height;
}
+ pix->width &= ~3;
+ pix->height &= ~3;
+
dev_geo(icd->parent, "%s(): return %d, fmt 0x%x, %ux%u\n",
__func__, ret, pix->pixelformat, pix->width, pix->height);
@@ -1824,8 +1956,8 @@
out_height != f.fmt.pix.height))
ret = -EINVAL;
if (!ret) {
- icd->user_width = out_width;
- icd->user_height = out_height;
+ icd->user_width = out_width & ~3;
+ icd->user_height = out_height & ~3;
ret = sh_mobile_ceu_set_bus_param(icd,
icd->current_fmt->host_fmt->fourcc);
}
@@ -1869,55 +2001,6 @@
return vb2_queue_init(q);
}
-static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
- struct v4l2_control *ctrl)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct sh_mobile_ceu_dev *pcdev = ici->priv;
- u32 val;
-
- switch (ctrl->id) {
- case V4L2_CID_SHARPNESS:
- val = ceu_read(pcdev, CLFCR);
- ctrl->value = val ^ 1;
- return 0;
- }
- return -ENOIOCTLCMD;
-}
-
-static int sh_mobile_ceu_set_ctrl(struct soc_camera_device *icd,
- struct v4l2_control *ctrl)
-{
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct sh_mobile_ceu_dev *pcdev = ici->priv;
-
- switch (ctrl->id) {
- case V4L2_CID_SHARPNESS:
- switch (icd->current_fmt->host_fmt->fourcc) {
- case V4L2_PIX_FMT_NV12:
- case V4L2_PIX_FMT_NV21:
- case V4L2_PIX_FMT_NV16:
- case V4L2_PIX_FMT_NV61:
- ceu_write(pcdev, CLFCR, !ctrl->value);
- return 0;
- }
- return -EINVAL;
- }
- return -ENOIOCTLCMD;
-}
-
-static const struct v4l2_queryctrl sh_mobile_ceu_controls[] = {
- {
- .id = V4L2_CID_SHARPNESS,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Low-pass filter",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- },
-};
-
static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
.owner = THIS_MODULE,
.add = sh_mobile_ceu_add_device,
@@ -1929,14 +2012,10 @@
.set_livecrop = sh_mobile_ceu_set_livecrop,
.set_fmt = sh_mobile_ceu_set_fmt,
.try_fmt = sh_mobile_ceu_try_fmt,
- .set_ctrl = sh_mobile_ceu_set_ctrl,
- .get_ctrl = sh_mobile_ceu_get_ctrl,
.poll = sh_mobile_ceu_poll,
.querycap = sh_mobile_ceu_querycap,
.set_bus_param = sh_mobile_ceu_set_bus_param,
.init_videobuf2 = sh_mobile_ceu_init_videobuf,
- .controls = sh_mobile_ceu_controls,
- .num_controls = ARRAY_SIZE(sh_mobile_ceu_controls),
};
struct bus_wait {
diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c
index 2893a01..37706eb 100644
--- a/drivers/media/video/sh_mobile_csi2.c
+++ b/drivers/media/video/sh_mobile_csi2.c
@@ -19,6 +19,7 @@
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
#include <media/v4l2-device.h>
@@ -35,11 +36,10 @@
struct v4l2_subdev subdev;
struct list_head list;
unsigned int irq;
+ unsigned long mipi_flags;
void __iomem *base;
struct platform_device *pdev;
struct sh_csi2_client_config *client;
- unsigned long (*query_bus_param)(struct soc_camera_device *);
- int (*set_bus_param)(struct soc_camera_device *, unsigned long);
};
static int sh_csi2_try_fmt(struct v4l2_subdev *sd,
@@ -127,9 +127,34 @@
return 0;
}
+static int sh_csi2_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+
+ return 0;
+}
+
+static int sh_csi2_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev);
+ struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+ struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
+ struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2,
+ .flags = priv->mipi_flags};
+
+ return v4l2_subdev_call(client_sd, video, s_mbus_config, &client_cfg);
+}
+
static struct v4l2_subdev_video_ops sh_csi2_subdev_video_ops = {
.s_mbus_fmt = sh_csi2_s_fmt,
.try_mbus_fmt = sh_csi2_try_fmt,
+ .g_mbus_config = sh_csi2_g_mbus_config,
+ .s_mbus_config = sh_csi2_s_mbus_config,
};
static void sh_csi2_hwinit(struct sh_csi2 *priv)
@@ -144,11 +169,21 @@
udelay(5);
iowrite32(0x00000000, priv->base + SH_CSI2_SRST);
- if (priv->client->lanes & 3)
- tmp |= priv->client->lanes & 3;
- else
- /* Default - both lanes */
- tmp |= 3;
+ switch (pdata->type) {
+ case SH_CSI2C:
+ if (priv->client->lanes == 1)
+ tmp |= 1;
+ else
+ /* Default - both lanes */
+ tmp |= 3;
+ break;
+ case SH_CSI2I:
+ if (!priv->client->lanes || priv->client->lanes > 4)
+ /* Default - all 4 lanes */
+ tmp |= 0xf;
+ else
+ tmp |= (1 << priv->client->lanes) - 1;
+ }
if (priv->client->phy == SH_CSI2_PHY_MAIN)
tmp |= 0x8000;
@@ -163,38 +198,18 @@
iowrite32(tmp, priv->base + SH_CSI2_CHKSUM);
}
-static int sh_csi2_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return 0;
-}
-
-static unsigned long sh_csi2_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- const unsigned long flags = SOCAM_PCLK_SAMPLE_RISING |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_DATA_ACTIVE_HIGH;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
static int sh_csi2_client_connect(struct sh_csi2 *priv)
{
struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data;
- struct v4l2_subdev *sd, *csi2_sd = &priv->subdev;
- struct soc_camera_device *icd = NULL;
+ struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
+ struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd);
struct device *dev = v4l2_get_subdevdata(&priv->subdev);
- int i;
+ struct v4l2_mbus_config cfg;
+ unsigned long common_flags, csi2_flags;
+ int i, ret;
- v4l2_device_for_each_subdev(sd, csi2_sd->v4l2_dev)
- if (sd->grp_id) {
- icd = (struct soc_camera_device *)sd->grp_id;
- break;
- }
-
- if (!icd)
- return -EINVAL;
+ if (priv->client)
+ return -EBUSY;
for (i = 0; i < pdata->num_clients; i++)
if (&pdata->clients[i].pdev->dev == icd->pdev)
@@ -205,15 +220,42 @@
if (i == pdata->num_clients)
return -ENODEV;
+ /* Check if we can support this camera */
+ csi2_flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK | V4L2_MBUS_CSI2_1_LANE;
+
+ switch (pdata->type) {
+ case SH_CSI2C:
+ if (pdata->clients[i].lanes != 1)
+ csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
+ break;
+ case SH_CSI2I:
+ switch (pdata->clients[i].lanes) {
+ default:
+ csi2_flags |= V4L2_MBUS_CSI2_4_LANE;
+ case 3:
+ csi2_flags |= V4L2_MBUS_CSI2_3_LANE;
+ case 2:
+ csi2_flags |= V4L2_MBUS_CSI2_2_LANE;
+ }
+ }
+
+ cfg.type = V4L2_MBUS_CSI2;
+ ret = v4l2_subdev_call(client_sd, video, g_mbus_config, &cfg);
+ if (ret == -ENOIOCTLCMD)
+ common_flags = csi2_flags;
+ else if (!ret)
+ common_flags = soc_mbus_config_compatible(&cfg,
+ csi2_flags);
+ else
+ common_flags = 0;
+
+ if (!common_flags)
+ return -EINVAL;
+
+ /* All good: camera MIPI configuration supported */
+ priv->mipi_flags = common_flags;
priv->client = pdata->clients + i;
- priv->set_bus_param = icd->ops->set_bus_param;
- priv->query_bus_param = icd->ops->query_bus_param;
- icd->ops->set_bus_param = sh_csi2_set_bus_param;
- icd->ops->query_bus_param = sh_csi2_query_bus_param;
-
- csi2_sd->grp_id = (long)icd;
-
pm_runtime_get_sync(dev);
sh_csi2_hwinit(priv);
@@ -223,16 +265,10 @@
static void sh_csi2_client_disconnect(struct sh_csi2 *priv)
{
- struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id;
+ if (!priv->client)
+ return;
priv->client = NULL;
- priv->subdev.grp_id = 0;
-
- /* Driver is about to be unbound */
- icd->ops->set_bus_param = priv->set_bus_param;
- icd->ops->query_bus_param = priv->query_bus_param;
- priv->set_bus_param = NULL;
- priv->query_bus_param = NULL;
pm_runtime_put(v4l2_get_subdevdata(&priv->subdev));
}
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 5bdfe7e..b72580c 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -50,49 +50,65 @@
static LIST_HEAD(devices);
static DEFINE_MUTEX(list_lock); /* Protects the list of hosts */
-static int soc_camera_power_set(struct soc_camera_device *icd,
- struct soc_camera_link *icl,
- int power_on)
+static int soc_camera_power_on(struct soc_camera_device *icd,
+ struct soc_camera_link *icl)
{
- int ret;
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ int ret = regulator_bulk_enable(icl->num_regulators,
+ icl->regulators);
+ if (ret < 0) {
+ dev_err(icd->pdev, "Cannot enable regulators\n");
+ return ret;
+ }
- if (power_on) {
- ret = regulator_bulk_enable(icl->num_regulators,
- icl->regulators);
- if (ret < 0) {
- dev_err(icd->pdev, "Cannot enable regulators\n");
- return ret;
- }
-
- if (icl->power)
- ret = icl->power(icd->pdev, power_on);
+ if (icl->power) {
+ ret = icl->power(icd->pdev, 1);
if (ret < 0) {
dev_err(icd->pdev,
"Platform failed to power-on the camera.\n");
-
- regulator_bulk_disable(icl->num_regulators,
- icl->regulators);
- return ret;
+ goto elinkpwr;
}
- } else {
- ret = 0;
- if (icl->power)
- ret = icl->power(icd->pdev, 0);
+ }
+
+ ret = v4l2_subdev_call(sd, core, s_power, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ goto esdpwr;
+
+ return 0;
+
+esdpwr:
+ if (icl->power)
+ icl->power(icd->pdev, 0);
+elinkpwr:
+ regulator_bulk_disable(icl->num_regulators,
+ icl->regulators);
+ return ret;
+}
+
+static int soc_camera_power_off(struct soc_camera_device *icd,
+ struct soc_camera_link *icl)
+{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ int ret = v4l2_subdev_call(sd, core, s_power, 0);
+
+ if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
+ return ret;
+
+ if (icl->power) {
+ ret = icl->power(icd->pdev, 0);
if (ret < 0) {
dev_err(icd->pdev,
"Platform failed to power-off the camera.\n");
return ret;
}
-
- ret = regulator_bulk_disable(icl->num_regulators,
- icl->regulators);
- if (ret < 0) {
- dev_err(icd->pdev, "Cannot disable regulators\n");
- return ret;
- }
}
- return 0;
+ ret = regulator_bulk_disable(icl->num_regulators,
+ icl->regulators);
+ if (ret < 0)
+ dev_err(icd->pdev, "Cannot disable regulators\n");
+
+ return ret;
}
const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
@@ -108,38 +124,38 @@
EXPORT_SYMBOL(soc_camera_xlate_by_fourcc);
/**
- * soc_camera_apply_sensor_flags() - apply platform SOCAM_SENSOR_INVERT_* flags
+ * soc_camera_apply_board_flags() - apply platform SOCAM_SENSOR_INVERT_* flags
* @icl: camera platform parameters
- * @flags: flags to be inverted according to platform configuration
+ * @cfg: media bus configuration
* @return: resulting flags
*/
-unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
- unsigned long flags)
+unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
+ const struct v4l2_mbus_config *cfg)
{
- unsigned long f;
+ unsigned long f, flags = cfg->flags;
/* If only one of the two polarities is supported, switch to the opposite */
if (icl->flags & SOCAM_SENSOR_INVERT_HSYNC) {
- f = flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW);
- if (f == SOCAM_HSYNC_ACTIVE_HIGH || f == SOCAM_HSYNC_ACTIVE_LOW)
- flags ^= SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW;
+ f = flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW);
+ if (f == V4L2_MBUS_HSYNC_ACTIVE_HIGH || f == V4L2_MBUS_HSYNC_ACTIVE_LOW)
+ flags ^= V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW;
}
if (icl->flags & SOCAM_SENSOR_INVERT_VSYNC) {
- f = flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW);
- if (f == SOCAM_VSYNC_ACTIVE_HIGH || f == SOCAM_VSYNC_ACTIVE_LOW)
- flags ^= SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW;
+ f = flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW);
+ if (f == V4L2_MBUS_VSYNC_ACTIVE_HIGH || f == V4L2_MBUS_VSYNC_ACTIVE_LOW)
+ flags ^= V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW;
}
if (icl->flags & SOCAM_SENSOR_INVERT_PCLK) {
- f = flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING);
- if (f == SOCAM_PCLK_SAMPLE_RISING || f == SOCAM_PCLK_SAMPLE_FALLING)
- flags ^= SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING;
+ f = flags & (V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING);
+ if (f == V4L2_MBUS_PCLK_SAMPLE_RISING || f == V4L2_MBUS_PCLK_SAMPLE_FALLING)
+ flags ^= V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING;
}
return flags;
}
-EXPORT_SYMBOL(soc_camera_apply_sensor_flags);
+EXPORT_SYMBOL(soc_camera_apply_board_flags);
#define pixfmtstr(x) (x) & 0xff, ((x) >> 8) & 0xff, ((x) >> 16) & 0xff, \
((x) >> 24) & 0xff
@@ -233,6 +249,14 @@
return v4l2_subdev_call(sd, core, s_std, *a);
}
+static int soc_camera_g_std(struct file *file, void *priv, v4l2_std_id *a)
+{
+ struct soc_camera_device *icd = file->private_data;
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+
+ return v4l2_subdev_call(sd, core, g_std, a);
+}
+
static int soc_camera_enum_fsizes(struct file *file, void *fh,
struct v4l2_frmsizeenum *fsize)
{
@@ -318,6 +342,32 @@
return vb2_dqbuf(&icd->vb2_vidq, p, file->f_flags & O_NONBLOCK);
}
+static int soc_camera_create_bufs(struct file *file, void *priv,
+ struct v4l2_create_buffers *create)
+{
+ struct soc_camera_device *icd = file->private_data;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+
+ /* videobuf2 only */
+ if (ici->ops->init_videobuf)
+ return -EINVAL;
+ else
+ return vb2_create_bufs(&icd->vb2_vidq, create);
+}
+
+static int soc_camera_prepare_buf(struct file *file, void *priv,
+ struct v4l2_buffer *b)
+{
+ struct soc_camera_device *icd = file->private_data;
+ struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
+
+ /* videobuf2 only */
+ if (ici->ops->init_videobuf)
+ return -EINVAL;
+ else
+ return vb2_prepare_buf(&icd->vb2_vidq, b);
+}
+
/* Always entered with .video_lock held */
static int soc_camera_init_user_formats(struct soc_camera_device *icd)
{
@@ -448,7 +498,7 @@
struct soc_camera_host *ici;
int ret;
- if (!icd->ops)
+ if (!to_soc_camera_control(icd))
/* No device driver attached */
return -ENODEV;
@@ -476,7 +526,7 @@
},
};
- ret = soc_camera_power_set(icd, icl, 1);
+ ret = soc_camera_power_on(icd, icl);
if (ret < 0)
goto epower;
@@ -512,6 +562,7 @@
if (ret < 0)
goto einitvb;
}
+ v4l2_ctrl_handler_setup(&icd->ctrl_handler);
}
file->private_data = icd;
@@ -529,7 +580,7 @@
eresume:
ici->ops->remove(icd);
eiciadd:
- soc_camera_power_set(icd, icl, 0);
+ soc_camera_power_off(icd, icl);
epower:
icd->use_count--;
module_put(ici->ops->owner);
@@ -553,7 +604,7 @@
if (ici->ops->init_videobuf2)
vb2_queue_release(&icd->vb2_vidq);
- soc_camera_power_set(icd, icl, 0);
+ soc_camera_power_off(icd, icl);
}
if (icd->streamer == file)
@@ -781,75 +832,6 @@
return 0;
}
-static int soc_camera_queryctrl(struct file *file, void *priv,
- struct v4l2_queryctrl *qc)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- int i;
-
- WARN_ON(priv != file->private_data);
-
- if (!qc->id)
- return -EINVAL;
-
- /* First check host controls */
- for (i = 0; i < ici->ops->num_controls; i++)
- if (qc->id == ici->ops->controls[i].id) {
- memcpy(qc, &(ici->ops->controls[i]),
- sizeof(*qc));
- return 0;
- }
-
- /* Then device controls */
- for (i = 0; i < icd->ops->num_controls; i++)
- if (qc->id == icd->ops->controls[i].id) {
- memcpy(qc, &(icd->ops->controls[i]),
- sizeof(*qc));
- return 0;
- }
-
- return -EINVAL;
-}
-
-static int soc_camera_g_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- int ret;
-
- WARN_ON(priv != file->private_data);
-
- if (ici->ops->get_ctrl) {
- ret = ici->ops->get_ctrl(icd, ctrl);
- if (ret != -ENOIOCTLCMD)
- return ret;
- }
-
- return v4l2_subdev_call(sd, core, g_ctrl, ctrl);
-}
-
-static int soc_camera_s_ctrl(struct file *file, void *priv,
- struct v4l2_control *ctrl)
-{
- struct soc_camera_device *icd = file->private_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- int ret;
-
- WARN_ON(priv != file->private_data);
-
- if (ici->ops->set_ctrl) {
- ret = ici->ops->set_ctrl(icd, ctrl);
- if (ret != -ENOIOCTLCMD)
- return ret;
- }
-
- return v4l2_subdev_call(sd, core, s_ctrl, ctrl);
-}
-
static int soc_camera_cropcap(struct file *file, void *fh,
struct v4l2_cropcap *a)
{
@@ -1003,7 +985,7 @@
goto ei2cga;
}
- icl->board_info->platform_data = icd;
+ icl->board_info->platform_data = icl;
subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
icl->board_info, NULL);
@@ -1052,12 +1034,29 @@
dev_info(icd->pdev, "Probing %s\n", dev_name(icd->pdev));
+ /*
+ * Currently the subdev with the largest number of controls (13) is
+ * ov6550. So let's pick 16 as a hint for the control handler. Note
+ * that this is a hint only: too large and you waste some memory, too
+ * small and there is a (very) small performance hit when looking up
+ * controls in the internal hash.
+ */
+ ret = v4l2_ctrl_handler_init(&icd->ctrl_handler, 16);
+ if (ret < 0)
+ return ret;
+
ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
icl->regulators);
if (ret < 0)
goto ereg;
- ret = soc_camera_power_set(icd, icl, 1);
+ /*
+ * This will not yet call v4l2_subdev_core_ops::s_power(1), because the
+ * subdevice has not been initialised yet. We'll have to call it once
+ * again after initialisation, even though it shouldn't be needed, we
+ * don't do any IO here.
+ */
+ ret = soc_camera_power_on(icd, icl);
if (ret < 0)
goto epower;
@@ -1098,6 +1097,7 @@
if (!control || !control->driver || !dev_get_drvdata(control) ||
!try_module_get(control->driver->owner)) {
icl->del_device(icd);
+ ret = -ENODEV;
goto enodrv;
}
}
@@ -1105,6 +1105,9 @@
sd = soc_camera_to_subdev(icd);
sd->grp_id = (long)icd;
+ if (v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler))
+ goto ectrl;
+
/* At this point client .probe() should have run already */
ret = soc_camera_init_user_formats(icd);
if (ret < 0)
@@ -1123,6 +1126,10 @@
if (ret < 0)
goto evidstart;
+ ret = v4l2_subdev_call(sd, core, s_power, 1);
+ if (ret < 0 && ret != -ENOIOCTLCMD)
+ goto esdpwr;
+
/* Try to improve our guess of a reasonable window format */
if (!v4l2_subdev_call(sd, video, g_mbus_fmt, &mf)) {
icd->user_width = mf.width;
@@ -1133,16 +1140,19 @@
ici->ops->remove(icd);
- soc_camera_power_set(icd, icl, 0);
+ soc_camera_power_off(icd, icl);
mutex_unlock(&icd->video_lock);
return 0;
+esdpwr:
+ video_unregister_device(icd->vdev);
evidstart:
mutex_unlock(&icd->video_lock);
soc_camera_free_user_formats(icd);
eiufmt:
+ectrl:
if (icl->board_info) {
soc_camera_free_i2c(icd);
} else {
@@ -1152,13 +1162,15 @@
enodrv:
eadddev:
video_device_release(icd->vdev);
+ icd->vdev = NULL;
evdc:
ici->ops->remove(icd);
eadd:
- soc_camera_power_set(icd, icl, 0);
+ soc_camera_power_off(icd, icl);
epower:
regulator_bulk_free(icl->num_regulators, icl->regulators);
ereg:
+ v4l2_ctrl_handler_free(&icd->ctrl_handler);
return ret;
}
@@ -1173,6 +1185,7 @@
BUG_ON(!icd->parent);
+ v4l2_ctrl_handler_free(&icd->ctrl_handler);
if (vdev) {
video_unregister_device(vdev);
icd->vdev = NULL;
@@ -1363,24 +1376,24 @@
static const struct v4l2_ioctl_ops soc_camera_ioctl_ops = {
.vidioc_querycap = soc_camera_querycap,
+ .vidioc_try_fmt_vid_cap = soc_camera_try_fmt_vid_cap,
.vidioc_g_fmt_vid_cap = soc_camera_g_fmt_vid_cap,
- .vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = soc_camera_s_fmt_vid_cap,
+ .vidioc_enum_fmt_vid_cap = soc_camera_enum_fmt_vid_cap,
.vidioc_enum_input = soc_camera_enum_input,
.vidioc_g_input = soc_camera_g_input,
.vidioc_s_input = soc_camera_s_input,
.vidioc_s_std = soc_camera_s_std,
+ .vidioc_g_std = soc_camera_g_std,
.vidioc_enum_framesizes = soc_camera_enum_fsizes,
.vidioc_reqbufs = soc_camera_reqbufs,
- .vidioc_try_fmt_vid_cap = soc_camera_try_fmt_vid_cap,
.vidioc_querybuf = soc_camera_querybuf,
.vidioc_qbuf = soc_camera_qbuf,
.vidioc_dqbuf = soc_camera_dqbuf,
+ .vidioc_create_bufs = soc_camera_create_bufs,
+ .vidioc_prepare_buf = soc_camera_prepare_buf,
.vidioc_streamon = soc_camera_streamon,
.vidioc_streamoff = soc_camera_streamoff,
- .vidioc_queryctrl = soc_camera_queryctrl,
- .vidioc_g_ctrl = soc_camera_g_ctrl,
- .vidioc_s_ctrl = soc_camera_s_ctrl,
.vidioc_cropcap = soc_camera_cropcap,
.vidioc_g_crop = soc_camera_g_crop,
.vidioc_s_crop = soc_camera_s_crop,
@@ -1409,6 +1422,7 @@
vdev->ioctl_ops = &soc_camera_ioctl_ops;
vdev->release = video_device_release;
vdev->tvnorms = V4L2_STD_UNKNOWN;
+ vdev->ctrl_handler = &icd->ctrl_handler;
vdev->lock = &icd->video_lock;
icd->vdev = vdev;
@@ -1427,11 +1441,6 @@
if (!icd->parent)
return -ENODEV;
- if (!icd->ops ||
- !icd->ops->query_bus_param ||
- !icd->ops->set_bus_param)
- return -EINVAL;
-
ret = video_register_device(icd->vdev, VFL_TYPE_GRABBER, -1);
if (ret < 0) {
dev_err(icd->pdev, "video_register_device failed: %d\n", ret);
diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c
index 8069cd6..4402a8a 100644
--- a/drivers/media/video/soc_camera_platform.c
+++ b/drivers/media/video/soc_camera_platform.c
@@ -30,32 +30,12 @@
return container_of(subdev, struct soc_camera_platform_priv, subdev);
}
-static struct soc_camera_platform_info *get_info(struct soc_camera_device *icd)
-{
- struct platform_device *pdev =
- to_platform_device(to_soc_camera_control(icd));
- return pdev->dev.platform_data;
-}
-
static int soc_camera_platform_s_stream(struct v4l2_subdev *sd, int enable)
{
struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
return p->set_capture(p, enable);
}
-static int soc_camera_platform_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- return 0;
-}
-
-static unsigned long
-soc_camera_platform_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_platform_info *p = get_info(icd);
- return p->bus_param;
-}
-
static int soc_camera_platform_fill_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf)
{
@@ -115,6 +95,17 @@
return 0;
}
+static int soc_camera_platform_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct soc_camera_platform_info *p = v4l2_get_subdevdata(sd);
+
+ cfg->flags = p->mbus_param;
+ cfg->type = p->mbus_type;
+
+ return 0;
+}
+
static struct v4l2_subdev_video_ops platform_subdev_video_ops = {
.s_stream = soc_camera_platform_s_stream,
.enum_mbus_fmt = soc_camera_platform_enum_fmt,
@@ -123,6 +114,7 @@
.try_mbus_fmt = soc_camera_platform_fill_fmt,
.g_mbus_fmt = soc_camera_platform_fill_fmt,
.s_mbus_fmt = soc_camera_platform_fill_fmt,
+ .g_mbus_config = soc_camera_platform_g_mbus_config,
};
static struct v4l2_subdev_ops platform_subdev_ops = {
@@ -130,11 +122,6 @@
.video = &platform_subdev_video_ops,
};
-static struct soc_camera_ops soc_camera_platform_ops = {
- .set_bus_param = soc_camera_platform_set_bus_param,
- .query_bus_param = soc_camera_platform_query_bus_param,
-};
-
static int soc_camera_platform_probe(struct platform_device *pdev)
{
struct soc_camera_host *ici;
@@ -163,8 +150,6 @@
/* Set the control device reference */
icd->control = &pdev->dev;
- icd->ops = &soc_camera_platform_ops;
-
ici = to_soc_camera_host(icd->parent);
v4l2_subdev_init(&priv->subdev, &platform_subdev_ops);
@@ -178,7 +163,6 @@
return ret;
evdrs:
- icd->ops = NULL;
platform_set_drvdata(pdev, NULL);
kfree(priv);
return ret;
@@ -187,11 +171,10 @@
static int soc_camera_platform_remove(struct platform_device *pdev)
{
struct soc_camera_platform_priv *priv = get_priv(pdev);
- struct soc_camera_platform_info *p = pdev->dev.platform_data;
- struct soc_camera_device *icd = p->icd;
+ struct soc_camera_platform_info *p = v4l2_get_subdevdata(&priv->subdev);
+ p->icd->control = NULL;
v4l2_device_unregister_subdev(&priv->subdev);
- icd->ops = NULL;
platform_set_drvdata(pdev, NULL);
kfree(priv);
return 0;
diff --git a/drivers/media/video/soc_mediabus.c b/drivers/media/video/soc_mediabus.c
index bea7c9c..cf7f219 100644
--- a/drivers/media/video/soc_mediabus.c
+++ b/drivers/media/video/soc_mediabus.c
@@ -383,6 +383,39 @@
}
EXPORT_SYMBOL(soc_mbus_get_fmtdesc);
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+ unsigned int flags)
+{
+ unsigned long common_flags;
+ bool hsync = true, vsync = true, pclk, data, mode;
+ bool mipi_lanes, mipi_clock;
+
+ common_flags = cfg->flags & flags;
+
+ switch (cfg->type) {
+ case V4L2_MBUS_PARALLEL:
+ hsync = common_flags & (V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_HSYNC_ACTIVE_LOW);
+ vsync = common_flags & (V4L2_MBUS_VSYNC_ACTIVE_HIGH |
+ V4L2_MBUS_VSYNC_ACTIVE_LOW);
+ case V4L2_MBUS_BT656:
+ pclk = common_flags & (V4L2_MBUS_PCLK_SAMPLE_RISING |
+ V4L2_MBUS_PCLK_SAMPLE_FALLING);
+ data = common_flags & (V4L2_MBUS_DATA_ACTIVE_HIGH |
+ V4L2_MBUS_DATA_ACTIVE_LOW);
+ mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE);
+ return (!hsync || !vsync || !pclk || !data || !mode) ?
+ 0 : common_flags;
+ case V4L2_MBUS_CSI2:
+ mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES;
+ mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK |
+ V4L2_MBUS_CSI2_CONTINUOUS_CLOCK);
+ return (!mipi_lanes || !mipi_clock) ? 0 : common_flags;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(soc_mbus_config_compatible);
+
static int __init soc_mbus_init(void)
{
return 0;
diff --git a/drivers/media/video/tw9910.c b/drivers/media/video/tw9910.c
index 742482e..a514fa6 100644
--- a/drivers/media/video/tw9910.c
+++ b/drivers/media/video/tw9910.c
@@ -22,11 +22,13 @@
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
#include <linux/videodev2.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-subdev.h>
+
#include <media/soc_camera.h>
#include <media/tw9910.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-subdev.h>
#define GET_ID(val) ((val & 0xF8) >> 3)
#define GET_REV(val) (val & 0x07)
@@ -203,6 +205,10 @@
#define RTSEL_FIELD 0x06 /* 0110 = FIELD */
#define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */
+/* HSYNC start and end are constant for now */
+#define HSYNC_START 0x0260
+#define HSYNC_END 0x0300
+
/*
* structure
*/
@@ -220,22 +226,11 @@
u16 vscale;
};
-struct tw9910_cropping_ctrl {
- u16 vdelay;
- u16 vactive;
- u16 hdelay;
- u16 hactive;
-};
-
-struct tw9910_hsync_ctrl {
- u16 start;
- u16 end;
-};
-
struct tw9910_priv {
struct v4l2_subdev subdev;
struct tw9910_video_info *info;
const struct tw9910_scale_ctrl *scale;
+ v4l2_std_id norm;
u32 revision;
};
@@ -329,11 +324,6 @@
},
};
-static const struct tw9910_hsync_ctrl tw9910_hsync_ctrl = {
- .start = 0x0260,
- .end = 0x0300,
-};
-
/*
* general function
*/
@@ -378,21 +368,20 @@
return ret;
}
-static int tw9910_set_hsync(struct i2c_client *client,
- const struct tw9910_hsync_ctrl *hsync)
+static int tw9910_set_hsync(struct i2c_client *client)
{
struct tw9910_priv *priv = to_tw9910(client);
int ret;
/* bit 10 - 3 */
ret = i2c_smbus_write_byte_data(client, HSBEGIN,
- (hsync->start & 0x07F8) >> 3);
+ (HSYNC_START & 0x07F8) >> 3);
if (ret < 0)
return ret;
/* bit 10 - 3 */
ret = i2c_smbus_write_byte_data(client, HSEND,
- (hsync->end & 0x07F8) >> 3);
+ (HSYNC_END & 0x07F8) >> 3);
if (ret < 0)
return ret;
@@ -400,8 +389,8 @@
/* bit 2 - 0 */
if (1 == priv->revision)
ret = tw9910_mask_set(client, HSLOWCTL, 0x77,
- (hsync->start & 0x0007) << 4 |
- (hsync->end & 0x0007));
+ (HSYNC_START & 0x0007) << 4 |
+ (HSYNC_END & 0x0007));
return ret;
}
@@ -433,12 +422,11 @@
return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2);
}
-static const struct tw9910_scale_ctrl*
-tw9910_select_norm(struct soc_camera_device *icd, u32 width, u32 height)
+static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm,
+ u32 width, u32 height)
{
const struct tw9910_scale_ctrl *scale;
const struct tw9910_scale_ctrl *ret = NULL;
- v4l2_std_id norm = icd->vdev->current_norm;
__u32 diff = 0xffffffff, tmp;
int size, i;
@@ -465,7 +453,7 @@
}
/*
- * soc_camera_ops function
+ * subdevice operations
*/
static int tw9910_s_stream(struct v4l2_subdev *sd, int enable)
{
@@ -507,49 +495,27 @@
return tw9910_power(client, enable);
}
-static int tw9910_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
+static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- u8 val = VSSL_VVALID | HSSL_DVALID;
-
- /*
- * set OUTCTR1
- *
- * We use VVALID and DVALID signals to control VSYNC and HSYNC
- * outputs, in this mode their polarity is inverted.
- */
- if (flags & SOCAM_HSYNC_ACTIVE_LOW)
- val |= HSP_HI;
-
- if (flags & SOCAM_VSYNC_ACTIVE_LOW)
- val |= VSP_HI;
-
- return i2c_smbus_write_byte_data(client, OUTCTR1, val);
-}
-
-static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
-{
- struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
struct tw9910_priv *priv = to_tw9910(client);
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_LOW | SOCAM_HSYNC_ACTIVE_LOW |
- SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth;
- return soc_camera_apply_sensor_flags(icl, flags);
+ *norm = priv->norm;
+
+ return 0;
}
static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
{
- int ret = -EINVAL;
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
- if (norm & (V4L2_STD_NTSC | V4L2_STD_PAL))
- ret = 0;
+ if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL)))
+ return -EINVAL;
- return ret;
+ priv->norm = norm;
+
+ return 0;
}
static int tw9910_g_chip_ident(struct v4l2_subdev *sd,
@@ -600,19 +566,17 @@
}
#endif
-static int tw9910_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height)
{
- struct v4l2_rect *rect = &a->c;
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct tw9910_priv *priv = to_tw9910(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- int ret = -EINVAL;
- u8 val;
+ int ret = -EINVAL;
+ u8 val;
/*
* select suitable norm
*/
- priv->scale = tw9910_select_norm(icd, rect->width, rect->height);
+ priv->scale = tw9910_select_norm(priv->norm, *width, *height);
if (!priv->scale)
goto tw9910_set_fmt_error;
@@ -670,14 +634,12 @@
/*
* set hsync
*/
- ret = tw9910_set_hsync(client, &tw9910_hsync_ctrl);
+ ret = tw9910_set_hsync(client);
if (ret < 0)
goto tw9910_set_fmt_error;
- rect->width = priv->scale->width;
- rect->height = priv->scale->height;
- rect->left = 0;
- rect->top = 0;
+ *width = priv->scale->width;
+ *height = priv->scale->height;
return ret;
@@ -694,25 +656,15 @@
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct tw9910_priv *priv = to_tw9910(client);
- if (!priv->scale) {
- int ret;
- struct v4l2_crop crop = {
- .c = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- };
- ret = tw9910_s_crop(sd, &crop);
- if (ret < 0)
- return ret;
- }
-
a->c.left = 0;
a->c.top = 0;
- a->c.width = priv->scale->width;
- a->c.height = priv->scale->height;
+ if (priv->norm & V4L2_STD_NTSC) {
+ a->c.width = 640;
+ a->c.height = 480;
+ } else {
+ a->c.width = 768;
+ a->c.height = 576;
+ }
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
return 0;
@@ -720,14 +672,19 @@
static int tw9910_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct tw9910_priv *priv = to_tw9910(client);
+
a->bounds.left = 0;
a->bounds.top = 0;
- a->bounds.width = 768;
- a->bounds.height = 576;
- a->defrect.left = 0;
- a->defrect.top = 0;
- a->defrect.width = 640;
- a->defrect.height = 480;
+ if (priv->norm & V4L2_STD_NTSC) {
+ a->bounds.width = 640;
+ a->bounds.height = 480;
+ } else {
+ a->bounds.width = 768;
+ a->bounds.height = 576;
+ }
+ a->defrect = a->bounds;
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
a->pixelaspect.numerator = 1;
a->pixelaspect.denominator = 1;
@@ -743,15 +700,8 @@
if (!priv->scale) {
int ret;
- struct v4l2_crop crop = {
- .c = {
- .left = 0,
- .top = 0,
- .width = 640,
- .height = 480,
- },
- };
- ret = tw9910_s_crop(sd, &crop);
+ u32 width = 640, height = 480;
+ ret = tw9910_set_frame(sd, &width, &height);
if (ret < 0)
return ret;
}
@@ -768,17 +718,7 @@
static int tw9910_s_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *mf)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct tw9910_priv *priv = to_tw9910(client);
- /* See tw9910_s_crop() - no proper cropping support */
- struct v4l2_crop a = {
- .c = {
- .left = 0,
- .top = 0,
- .width = mf->width,
- .height = mf->height,
- },
- };
+ u32 width = mf->width, height = mf->height;
int ret;
WARN_ON(mf->field != V4L2_FIELD_ANY &&
@@ -792,10 +732,10 @@
mf->colorspace = V4L2_COLORSPACE_JPEG;
- ret = tw9910_s_crop(sd, &a);
+ ret = tw9910_set_frame(sd, &width, &height);
if (!ret) {
- mf->width = priv->scale->width;
- mf->height = priv->scale->height;
+ mf->width = width;
+ mf->height = height;
}
return ret;
}
@@ -804,7 +744,7 @@
struct v4l2_mbus_framefmt *mf)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct tw9910_priv *priv = to_tw9910(client);
const struct tw9910_scale_ctrl *scale;
if (V4L2_FIELD_ANY == mf->field) {
@@ -820,7 +760,7 @@
/*
* select suitable norm
*/
- scale = tw9910_select_norm(icd, mf->width, mf->height);
+ scale = tw9910_select_norm(priv->norm, mf->width, mf->height);
if (!scale)
return -EINVAL;
@@ -830,16 +770,11 @@
return 0;
}
-static int tw9910_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client)
+static int tw9910_video_probe(struct i2c_client *client)
{
struct tw9910_priv *priv = to_tw9910(client);
s32 id;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/*
* tw9910 only use 8 or 16 bit bus width
*/
@@ -868,20 +803,15 @@
dev_info(&client->dev,
"tw9910 Product ID %0x:%0x\n", id, priv->revision);
- icd->vdev->tvnorms = V4L2_STD_NTSC | V4L2_STD_PAL;
- icd->vdev->current_norm = V4L2_STD_NTSC;
+ priv->norm = V4L2_STD_NTSC;
return 0;
}
-static struct soc_camera_ops tw9910_ops = {
- .set_bus_param = tw9910_set_bus_param,
- .query_bus_param = tw9910_query_bus_param,
-};
-
static struct v4l2_subdev_core_ops tw9910_subdev_core_ops = {
.g_chip_ident = tw9910_g_chip_ident,
.s_std = tw9910_s_std,
+ .g_std = tw9910_g_std,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = tw9910_g_register,
.s_register = tw9910_s_register,
@@ -898,6 +828,45 @@
return 0;
}
+static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+ cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+ V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+ V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+ V4L2_MBUS_DATA_ACTIVE_HIGH;
+ cfg->type = V4L2_MBUS_PARALLEL;
+ cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+ return 0;
+}
+
+static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
+ const struct v4l2_mbus_config *cfg)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ u8 val = VSSL_VVALID | HSSL_DVALID;
+ unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+
+ /*
+ * set OUTCTR1
+ *
+ * We use VVALID and DVALID signals to control VSYNC and HSYNC
+ * outputs, in this mode their polarity is inverted.
+ */
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+ val |= HSP_HI;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+ val |= VSP_HI;
+
+ return i2c_smbus_write_byte_data(client, OUTCTR1, val);
+}
+
static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
.s_stream = tw9910_s_stream,
.g_mbus_fmt = tw9910_g_fmt,
@@ -905,8 +874,9 @@
.try_mbus_fmt = tw9910_try_fmt,
.cropcap = tw9910_cropcap,
.g_crop = tw9910_g_crop,
- .s_crop = tw9910_s_crop,
.enum_mbus_fmt = tw9910_enum_fmt,
+ .g_mbus_config = tw9910_g_mbus_config,
+ .s_mbus_config = tw9910_s_mbus_config,
};
static struct v4l2_subdev_ops tw9910_subdev_ops = {
@@ -922,23 +892,18 @@
const struct i2c_device_id *did)
{
- struct tw9910_priv *priv;
- struct tw9910_video_info *info;
- struct soc_camera_device *icd = client->dev.platform_data;
- struct i2c_adapter *adapter =
+ struct tw9910_priv *priv;
+ struct tw9910_video_info *info;
+ struct i2c_adapter *adapter =
to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
- int ret;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+ int ret;
- if (!icd) {
- dev_err(&client->dev, "TW9910: missing soc-camera data!\n");
+ if (!icl || !icl->priv) {
+ dev_err(&client->dev, "TW9910: missing platform data!\n");
return -EINVAL;
}
- icl = to_soc_camera_link(icd);
- if (!icl || !icl->priv)
- return -EINVAL;
-
info = icl->priv;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -956,14 +921,9 @@
v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
- icd->ops = &tw9910_ops;
- icd->iface = icl->bus_id;
-
- ret = tw9910_video_probe(icd, client);
- if (ret) {
- icd->ops = NULL;
+ ret = tw9910_video_probe(client);
+ if (ret)
kfree(priv);
- }
return ret;
}
@@ -971,9 +931,7 @@
static int tw9910_remove(struct i2c_client *client)
{
struct tw9910_priv *priv = to_tw9910(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- icd->ops = NULL;
kfree(priv);
return 0;
}
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 61979b7..c68531b 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -159,11 +159,25 @@
} fmt;
};
-static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+/**
+ * struct v4l2_create_buffers32 - VIDIOC_CREATE_BUFS32 argument
+ * @index: on return, index of the first created buffer
+ * @count: entry: number of requested buffers,
+ * return: number of created buffers
+ * @memory: buffer memory type
+ * @format: frame format, for which buffers are requested
+ * @reserved: future extensions
+ */
+struct v4l2_create_buffers32 {
+ __u32 index;
+ __u32 count;
+ enum v4l2_memory memory;
+ struct v4l2_format32 format;
+ __u32 reserved[8];
+};
+
+static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
{
- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32)) ||
- get_user(kp->type, &up->type))
- return -EFAULT;
switch (kp->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
@@ -192,11 +206,24 @@
}
}
-static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
{
- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32)) ||
- put_user(kp->type, &up->type))
- return -EFAULT;
+ if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32)) ||
+ get_user(kp->type, &up->type))
+ return -EFAULT;
+ return __get_v4l2_format32(kp, up);
+}
+
+static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+{
+ if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_create_buffers32)) ||
+ copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format.fmt)))
+ return -EFAULT;
+ return __get_v4l2_format32(&kp->format, &up->format);
+}
+
+static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+{
switch (kp->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
@@ -225,6 +252,22 @@
}
}
+static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up)
+{
+ if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32)) ||
+ put_user(kp->type, &up->type))
+ return -EFAULT;
+ return __put_v4l2_format32(kp, up);
+}
+
+static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up)
+{
+ if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_create_buffers32)) ||
+ copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format.fmt)))
+ return -EFAULT;
+ return __put_v4l2_format32(&kp->format, &up->format);
+}
+
struct v4l2_standard32 {
__u32 index;
__u32 id[2]; /* __u64 would get the alignment wrong */
@@ -702,6 +745,8 @@
#define VIDIOC_S_EXT_CTRLS32 _IOWR('V', 72, struct v4l2_ext_controls32)
#define VIDIOC_TRY_EXT_CTRLS32 _IOWR('V', 73, struct v4l2_ext_controls32)
#define VIDIOC_DQEVENT32 _IOR ('V', 89, struct v4l2_event32)
+#define VIDIOC_CREATE_BUFS32 _IOWR('V', 92, struct v4l2_create_buffers32)
+#define VIDIOC_PREPARE_BUF32 _IOWR('V', 93, struct v4l2_buffer32)
#define VIDIOC_OVERLAY32 _IOW ('V', 14, s32)
#define VIDIOC_STREAMON32 _IOW ('V', 18, s32)
@@ -721,6 +766,7 @@
struct v4l2_standard v2s;
struct v4l2_ext_controls v2ecs;
struct v4l2_event v2ev;
+ struct v4l2_create_buffers v2crt;
unsigned long vx;
int vi;
} karg;
@@ -751,6 +797,8 @@
case VIDIOC_S_INPUT32: cmd = VIDIOC_S_INPUT; break;
case VIDIOC_G_OUTPUT32: cmd = VIDIOC_G_OUTPUT; break;
case VIDIOC_S_OUTPUT32: cmd = VIDIOC_S_OUTPUT; break;
+ case VIDIOC_CREATE_BUFS32: cmd = VIDIOC_CREATE_BUFS; break;
+ case VIDIOC_PREPARE_BUF32: cmd = VIDIOC_PREPARE_BUF; break;
}
switch (cmd) {
@@ -775,6 +823,12 @@
compatible_arg = 0;
break;
+ case VIDIOC_CREATE_BUFS:
+ err = get_v4l2_create32(&karg.v2crt, up);
+ compatible_arg = 0;
+ break;
+
+ case VIDIOC_PREPARE_BUF:
case VIDIOC_QUERYBUF:
case VIDIOC_QBUF:
case VIDIOC_DQBUF:
@@ -860,6 +914,10 @@
err = put_v4l2_format32(&karg.v2f, up);
break;
+ case VIDIOC_CREATE_BUFS:
+ err = put_v4l2_create32(&karg.v2crt, up);
+ break;
+
case VIDIOC_QUERYBUF:
case VIDIOC_QBUF:
case VIDIOC_DQBUF:
@@ -959,6 +1017,8 @@
case VIDIOC_DQEVENT32:
case VIDIOC_SUBSCRIBE_EVENT:
case VIDIOC_UNSUBSCRIBE_EVENT:
+ case VIDIOC_CREATE_BUFS32:
+ case VIDIOC_PREPARE_BUF32:
ret = do_video_ioctl(file, cmd, arg);
break;
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index fc8666a..5552f81 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -210,6 +210,7 @@
"Disabled",
"50 Hz",
"60 Hz",
+ "Auto",
NULL
};
static const char * const camera_exposure_auto[] = {
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index e6a2c3b..9fc0ae8 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -21,6 +21,7 @@
#include <linux/types.h>
#include <linux/ioctl.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#if defined(CONFIG_SPI)
#include <linux/spi/spi.h>
#endif
@@ -193,6 +194,13 @@
}
EXPORT_SYMBOL_GPL(v4l2_device_register_subdev);
+static void v4l2_device_release_subdev_node(struct video_device *vdev)
+{
+ struct v4l2_subdev *sd = video_get_drvdata(vdev);
+ sd->devnode = NULL;
+ kfree(vdev);
+}
+
int v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev)
{
struct video_device *vdev;
@@ -206,22 +214,40 @@
if (!(sd->flags & V4L2_SUBDEV_FL_HAS_DEVNODE))
continue;
- vdev = &sd->devnode;
+ vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
+ if (!vdev) {
+ err = -ENOMEM;
+ goto clean_up;
+ }
+
+ video_set_drvdata(vdev, sd);
strlcpy(vdev->name, sd->name, sizeof(vdev->name));
vdev->v4l2_dev = v4l2_dev;
vdev->fops = &v4l2_subdev_fops;
- vdev->release = video_device_release_empty;
+ vdev->release = v4l2_device_release_subdev_node;
vdev->ctrl_handler = sd->ctrl_handler;
err = __video_register_device(vdev, VFL_TYPE_SUBDEV, -1, 1,
sd->owner);
- if (err < 0)
- return err;
+ if (err < 0) {
+ kfree(vdev);
+ goto clean_up;
+ }
#if defined(CONFIG_MEDIA_CONTROLLER)
sd->entity.v4l.major = VIDEO_MAJOR;
sd->entity.v4l.minor = vdev->minor;
#endif
+ sd->devnode = vdev;
}
return 0;
+
+clean_up:
+ list_for_each_entry(sd, &v4l2_dev->subdevs, list) {
+ if (!sd->devnode)
+ break;
+ video_unregister_device(sd->devnode);
+ }
+
+ return err;
}
EXPORT_SYMBOL_GPL(v4l2_device_register_subdev_nodes);
@@ -247,7 +273,7 @@
if (v4l2_dev->mdev)
media_device_unregister_entity(&sd->entity);
#endif
- video_unregister_device(&sd->devnode);
+ video_unregister_device(sd->devnode);
module_put(sd->owner);
}
EXPORT_SYMBOL_GPL(v4l2_device_unregister_subdev);
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 24fd433..e1da8fc 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -273,6 +273,8 @@
[_IOC_NR(VIDIOC_DQEVENT)] = "VIDIOC_DQEVENT",
[_IOC_NR(VIDIOC_SUBSCRIBE_EVENT)] = "VIDIOC_SUBSCRIBE_EVENT",
[_IOC_NR(VIDIOC_UNSUBSCRIBE_EVENT)] = "VIDIOC_UNSUBSCRIBE_EVENT",
+ [_IOC_NR(VIDIOC_CREATE_BUFS)] = "VIDIOC_CREATE_BUFS",
+ [_IOC_NR(VIDIOC_PREPARE_BUF)] = "VIDIOC_PREPARE_BUF",
};
#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
@@ -2104,6 +2106,40 @@
dbgarg(cmd, "type=0x%8.8x", sub->type);
break;
}
+ case VIDIOC_CREATE_BUFS:
+ {
+ struct v4l2_create_buffers *create = arg;
+
+ if (!ops->vidioc_create_bufs)
+ break;
+ if (ret_prio) {
+ ret = ret_prio;
+ break;
+ }
+ ret = check_fmt(ops, create->format.type);
+ if (ret)
+ break;
+
+ ret = ops->vidioc_create_bufs(file, fh, create);
+
+ dbgarg(cmd, "count=%d @ %d\n", create->count, create->index);
+ break;
+ }
+ case VIDIOC_PREPARE_BUF:
+ {
+ struct v4l2_buffer *b = arg;
+
+ if (!ops->vidioc_prepare_buf)
+ break;
+ ret = check_fmt(ops, b->type);
+ if (ret)
+ break;
+
+ ret = ops->vidioc_prepare_buf(file, fh, b);
+
+ dbgarg(cmd, "index=%d", b->index);
+ break;
+ }
default:
if (!ops->vidioc_default)
break;
diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 3f5c7a3..979e544 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -38,7 +38,8 @@
(((q)->ops->op) ? ((q)->ops->op(args)) : 0)
#define V4L2_BUFFER_STATE_FLAGS (V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | \
- V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR)
+ V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR | \
+ V4L2_BUF_FLAG_PREPARED)
/**
* __vb2_buf_mem_alloc() - allocate video memory for the given buffer
@@ -109,13 +110,22 @@
* __setup_offsets() - setup unique offsets ("cookies") for every plane in
* every buffer on the queue
*/
-static void __setup_offsets(struct vb2_queue *q)
+static void __setup_offsets(struct vb2_queue *q, unsigned int n)
{
unsigned int buffer, plane;
struct vb2_buffer *vb;
- unsigned long off = 0;
+ unsigned long off;
- for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+ if (q->num_buffers) {
+ struct v4l2_plane *p;
+ vb = q->bufs[q->num_buffers - 1];
+ p = &vb->v4l2_planes[vb->num_planes - 1];
+ off = PAGE_ALIGN(p->m.mem_offset + p->length);
+ } else {
+ off = 0;
+ }
+
+ for (buffer = q->num_buffers; buffer < q->num_buffers + n; ++buffer) {
vb = q->bufs[buffer];
if (!vb)
continue;
@@ -161,7 +171,7 @@
vb->state = VB2_BUF_STATE_DEQUEUED;
vb->vb2_queue = q;
vb->num_planes = num_planes;
- vb->v4l2_buf.index = buffer;
+ vb->v4l2_buf.index = q->num_buffers + buffer;
vb->v4l2_buf.type = q->type;
vb->v4l2_buf.memory = memory;
@@ -189,15 +199,13 @@
}
}
- q->bufs[buffer] = vb;
+ q->bufs[q->num_buffers + buffer] = vb;
}
- q->num_buffers = buffer;
-
- __setup_offsets(q);
+ __setup_offsets(q, buffer);
dprintk(1, "Allocated %d buffers, %d plane(s) each\n",
- q->num_buffers, num_planes);
+ buffer, num_planes);
return buffer;
}
@@ -205,12 +213,13 @@
/**
* __vb2_free_mem() - release all video buffer memory for a given queue
*/
-static void __vb2_free_mem(struct vb2_queue *q)
+static void __vb2_free_mem(struct vb2_queue *q, unsigned int buffers)
{
unsigned int buffer;
struct vb2_buffer *vb;
- for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+ for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
+ ++buffer) {
vb = q->bufs[buffer];
if (!vb)
continue;
@@ -224,17 +233,18 @@
}
/**
- * __vb2_queue_free() - free the queue - video memory and related information
- * and return the queue to an uninitialized state. Might be called even if the
- * queue has already been freed.
+ * __vb2_queue_free() - free buffers at the end of the queue - video memory and
+ * related information, if no buffers are left return the queue to an
+ * uninitialized state. Might be called even if the queue has already been freed.
*/
-static void __vb2_queue_free(struct vb2_queue *q)
+static void __vb2_queue_free(struct vb2_queue *q, unsigned int buffers)
{
unsigned int buffer;
/* Call driver-provided cleanup function for each buffer, if provided */
if (q->ops->buf_cleanup) {
- for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+ for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
+ ++buffer) {
if (NULL == q->bufs[buffer])
continue;
q->ops->buf_cleanup(q->bufs[buffer]);
@@ -242,23 +252,25 @@
}
/* Release video buffer memory */
- __vb2_free_mem(q);
+ __vb2_free_mem(q, buffers);
/* Free videobuf buffers */
- for (buffer = 0; buffer < q->num_buffers; ++buffer) {
+ for (buffer = q->num_buffers - buffers; buffer < q->num_buffers;
+ ++buffer) {
kfree(q->bufs[buffer]);
q->bufs[buffer] = NULL;
}
- q->num_buffers = 0;
- q->memory = 0;
+ q->num_buffers -= buffers;
+ if (!q->num_buffers)
+ q->memory = 0;
}
/**
* __verify_planes_array() - verify that the planes array passed in struct
* v4l2_buffer from userspace can be safely used
*/
-static int __verify_planes_array(struct vb2_buffer *vb, struct v4l2_buffer *b)
+static int __verify_planes_array(struct vb2_buffer *vb, const struct v4l2_buffer *b)
{
/* Is memory for copying plane information present? */
if (NULL == b->m.planes) {
@@ -318,7 +330,7 @@
static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b)
{
struct vb2_queue *q = vb->vb2_queue;
- int ret = 0;
+ int ret;
/* Copy back data such as timestamp, flags, input, etc. */
memcpy(b, &vb->v4l2_buf, offsetof(struct v4l2_buffer, m));
@@ -365,6 +377,9 @@
case VB2_BUF_STATE_DONE:
b->flags |= V4L2_BUF_FLAG_DONE;
break;
+ case VB2_BUF_STATE_PREPARED:
+ b->flags |= V4L2_BUF_FLAG_PREPARED;
+ break;
case VB2_BUF_STATE_DEQUEUED:
/* nothing */
break;
@@ -373,7 +388,7 @@
if (__buffer_in_use(q, vb))
b->flags |= V4L2_BUF_FLAG_MAPPED;
- return ret;
+ return 0;
}
/**
@@ -459,7 +474,7 @@
*/
int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req)
{
- unsigned int num_buffers, num_planes;
+ unsigned int num_buffers, allocated_buffers, num_planes = 0;
int ret = 0;
if (q->fileio) {
@@ -507,7 +522,7 @@
return -EBUSY;
}
- __vb2_queue_free(q);
+ __vb2_queue_free(q, q->num_buffers);
/*
* In case of REQBUFS(0) return immediately without calling
@@ -529,7 +544,7 @@
* Ask the driver how many buffers and planes per buffer it requires.
* Driver also sets the size and allocator context for each plane.
*/
- ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes,
+ ret = call_qop(q, queue_setup, q, NULL, &num_buffers, &num_planes,
q->plane_sizes, q->alloc_ctx);
if (ret)
return ret;
@@ -541,44 +556,168 @@
return -ENOMEM;
}
+ allocated_buffers = ret;
+
/*
* Check if driver can handle the allocated number of buffers.
*/
- if (ret < num_buffers) {
- unsigned int orig_num_buffers;
+ if (allocated_buffers < num_buffers) {
+ num_buffers = allocated_buffers;
- orig_num_buffers = num_buffers = ret;
- ret = call_qop(q, queue_setup, q, &num_buffers, &num_planes,
- q->plane_sizes, q->alloc_ctx);
- if (ret)
- goto free_mem;
+ ret = call_qop(q, queue_setup, q, NULL, &num_buffers,
+ &num_planes, q->plane_sizes, q->alloc_ctx);
- if (orig_num_buffers < num_buffers) {
+ if (!ret && allocated_buffers < num_buffers)
ret = -ENOMEM;
- goto free_mem;
- }
/*
- * Ok, driver accepted smaller number of buffers.
+ * Either the driver has accepted a smaller number of buffers,
+ * or .queue_setup() returned an error
*/
- ret = num_buffers;
+ }
+
+ q->num_buffers = allocated_buffers;
+
+ if (ret < 0) {
+ __vb2_queue_free(q, allocated_buffers);
+ return ret;
}
/*
* Return the number of successfully allocated buffers
* to the userspace.
*/
- req->count = ret;
+ req->count = allocated_buffers;
return 0;
-
-free_mem:
- __vb2_queue_free(q);
- return ret;
}
EXPORT_SYMBOL_GPL(vb2_reqbufs);
/**
+ * vb2_create_bufs() - Allocate buffers and any required auxiliary structs
+ * @q: videobuf2 queue
+ * @create: creation parameters, passed from userspace to vidioc_create_bufs
+ * handler in driver
+ *
+ * Should be called from vidioc_create_bufs ioctl handler of a driver.
+ * This function:
+ * 1) verifies parameter sanity
+ * 2) calls the .queue_setup() queue operation
+ * 3) performs any necessary memory allocations
+ *
+ * The return values from this function are intended to be directly returned
+ * from vidioc_create_bufs handler in driver.
+ */
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create)
+{
+ unsigned int num_planes = 0, num_buffers, allocated_buffers;
+ int ret = 0;
+
+ if (q->fileio) {
+ dprintk(1, "%s(): file io in progress\n", __func__);
+ return -EBUSY;
+ }
+
+ if (create->memory != V4L2_MEMORY_MMAP
+ && create->memory != V4L2_MEMORY_USERPTR) {
+ dprintk(1, "%s(): unsupported memory type\n", __func__);
+ return -EINVAL;
+ }
+
+ if (create->format.type != q->type) {
+ dprintk(1, "%s(): requested type is incorrect\n", __func__);
+ return -EINVAL;
+ }
+
+ /*
+ * Make sure all the required memory ops for given memory type
+ * are available.
+ */
+ if (create->memory == V4L2_MEMORY_MMAP && __verify_mmap_ops(q)) {
+ dprintk(1, "%s(): MMAP for current setup unsupported\n", __func__);
+ return -EINVAL;
+ }
+
+ if (create->memory == V4L2_MEMORY_USERPTR && __verify_userptr_ops(q)) {
+ dprintk(1, "%s(): USERPTR for current setup unsupported\n", __func__);
+ return -EINVAL;
+ }
+
+ if (q->num_buffers == VIDEO_MAX_FRAME) {
+ dprintk(1, "%s(): maximum number of buffers already allocated\n",
+ __func__);
+ return -ENOBUFS;
+ }
+
+ create->index = q->num_buffers;
+
+ if (!q->num_buffers) {
+ memset(q->plane_sizes, 0, sizeof(q->plane_sizes));
+ memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx));
+ q->memory = create->memory;
+ }
+
+ num_buffers = min(create->count, VIDEO_MAX_FRAME - q->num_buffers);
+
+ /*
+ * Ask the driver, whether the requested number of buffers, planes per
+ * buffer and their sizes are acceptable
+ */
+ ret = call_qop(q, queue_setup, q, &create->format, &num_buffers,
+ &num_planes, q->plane_sizes, q->alloc_ctx);
+ if (ret)
+ return ret;
+
+ /* Finally, allocate buffers and video memory */
+ ret = __vb2_queue_alloc(q, create->memory, num_buffers,
+ num_planes);
+ if (ret < 0) {
+ dprintk(1, "Memory allocation failed with error: %d\n", ret);
+ return ret;
+ }
+
+ allocated_buffers = ret;
+
+ /*
+ * Check if driver can handle the so far allocated number of buffers.
+ */
+ if (ret < num_buffers) {
+ num_buffers = ret;
+
+ /*
+ * q->num_buffers contains the total number of buffers, that the
+ * queue driver has set up
+ */
+ ret = call_qop(q, queue_setup, q, &create->format, &num_buffers,
+ &num_planes, q->plane_sizes, q->alloc_ctx);
+
+ if (!ret && allocated_buffers < num_buffers)
+ ret = -ENOMEM;
+
+ /*
+ * Either the driver has accepted a smaller number of buffers,
+ * or .queue_setup() returned an error
+ */
+ }
+
+ q->num_buffers += allocated_buffers;
+
+ if (ret < 0) {
+ __vb2_queue_free(q, allocated_buffers);
+ return ret;
+ }
+
+ /*
+ * Return the number of successfully allocated buffers
+ * to the userspace.
+ */
+ create->count = allocated_buffers;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vb2_create_bufs);
+
+/**
* vb2_plane_vaddr() - Return a kernel virtual address of a given plane
* @vb: vb2_buffer to which the plane in question belongs to
* @plane_no: plane number for which the address is to be returned
@@ -662,7 +801,7 @@
* __fill_vb2_buffer() - fill a vb2_buffer with information provided in
* a v4l2_buffer by the userspace
*/
-static int __fill_vb2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b,
+static int __fill_vb2_buffer(struct vb2_buffer *vb, const struct v4l2_buffer *b,
struct v4l2_plane *v4l2_planes)
{
unsigned int plane;
@@ -726,7 +865,7 @@
/**
* __qbuf_userptr() - handle qbuf of a USERPTR buffer
*/
-static int __qbuf_userptr(struct vb2_buffer *vb, struct v4l2_buffer *b)
+static int __qbuf_userptr(struct vb2_buffer *vb, const struct v4l2_buffer *b)
{
struct v4l2_plane planes[VIDEO_MAX_PLANES];
struct vb2_queue *q = vb->vb2_queue;
@@ -815,7 +954,7 @@
/**
* __qbuf_mmap() - handle qbuf of an MMAP buffer
*/
-static int __qbuf_mmap(struct vb2_buffer *vb, struct v4l2_buffer *b)
+static int __qbuf_mmap(struct vb2_buffer *vb, const struct v4l2_buffer *b)
{
return __fill_vb2_buffer(vb, b, vb->v4l2_planes);
}
@@ -832,6 +971,95 @@
q->ops->buf_queue(vb);
}
+static int __buf_prepare(struct vb2_buffer *vb, const struct v4l2_buffer *b)
+{
+ struct vb2_queue *q = vb->vb2_queue;
+ int ret;
+
+ switch (q->memory) {
+ case V4L2_MEMORY_MMAP:
+ ret = __qbuf_mmap(vb, b);
+ break;
+ case V4L2_MEMORY_USERPTR:
+ ret = __qbuf_userptr(vb, b);
+ break;
+ default:
+ WARN(1, "Invalid queue type\n");
+ ret = -EINVAL;
+ }
+
+ if (!ret)
+ ret = call_qop(q, buf_prepare, vb);
+ if (ret)
+ dprintk(1, "qbuf: buffer preparation failed: %d\n", ret);
+ else
+ vb->state = VB2_BUF_STATE_PREPARED;
+
+ return ret;
+}
+
+/**
+ * vb2_prepare_buf() - Pass ownership of a buffer from userspace to the kernel
+ * @q: videobuf2 queue
+ * @b: buffer structure passed from userspace to vidioc_prepare_buf
+ * handler in driver
+ *
+ * Should be called from vidioc_prepare_buf ioctl handler of a driver.
+ * This function:
+ * 1) verifies the passed buffer,
+ * 2) calls buf_prepare callback in the driver (if provided), in which
+ * driver-specific buffer initialization can be performed,
+ *
+ * The return values from this function are intended to be directly returned
+ * from vidioc_prepare_buf handler in driver.
+ */
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b)
+{
+ struct vb2_buffer *vb;
+ int ret;
+
+ if (q->fileio) {
+ dprintk(1, "%s(): file io in progress\n", __func__);
+ return -EBUSY;
+ }
+
+ if (b->type != q->type) {
+ dprintk(1, "%s(): invalid buffer type\n", __func__);
+ return -EINVAL;
+ }
+
+ if (b->index >= q->num_buffers) {
+ dprintk(1, "%s(): buffer index out of range\n", __func__);
+ return -EINVAL;
+ }
+
+ vb = q->bufs[b->index];
+ if (NULL == vb) {
+ /* Should never happen */
+ dprintk(1, "%s(): buffer is NULL\n", __func__);
+ return -EINVAL;
+ }
+
+ if (b->memory != q->memory) {
+ dprintk(1, "%s(): invalid memory type\n", __func__);
+ return -EINVAL;
+ }
+
+ if (vb->state != VB2_BUF_STATE_DEQUEUED) {
+ dprintk(1, "%s(): invalid buffer state %d\n", __func__, vb->state);
+ return -EINVAL;
+ }
+
+ ret = __buf_prepare(vb, b);
+ if (ret < 0)
+ return ret;
+
+ __fill_v4l2_buffer(vb, b);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vb2_prepare_buf);
+
/**
* vb2_qbuf() - Queue a buffer from userspace
* @q: videobuf2 queue
@@ -841,8 +1069,8 @@
* Should be called from vidioc_qbuf ioctl handler of a driver.
* This function:
* 1) verifies the passed buffer,
- * 2) calls buf_prepare callback in the driver (if provided), in which
- * driver-specific buffer initialization can be performed,
+ * 2) if necessary, calls buf_prepare callback in the driver (if provided), in
+ * which driver-specific buffer initialization can be performed,
* 3) if streaming is on, queues the buffer in driver by the means of buf_queue
* callback for processing.
*
@@ -852,7 +1080,7 @@
int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b)
{
struct vb2_buffer *vb;
- int ret = 0;
+ int ret;
if (q->fileio) {
dprintk(1, "qbuf: file io in progress\n");
@@ -881,29 +1109,18 @@
return -EINVAL;
}
- if (vb->state != VB2_BUF_STATE_DEQUEUED) {
+ switch (vb->state) {
+ case VB2_BUF_STATE_DEQUEUED:
+ ret = __buf_prepare(vb, b);
+ if (ret)
+ return ret;
+ case VB2_BUF_STATE_PREPARED:
+ break;
+ default:
dprintk(1, "qbuf: buffer already in use\n");
return -EINVAL;
}
- if (q->memory == V4L2_MEMORY_MMAP)
- ret = __qbuf_mmap(vb, b);
- else if (q->memory == V4L2_MEMORY_USERPTR)
- ret = __qbuf_userptr(vb, b);
- else {
- WARN(1, "Invalid queue type\n");
- return -EINVAL;
- }
-
- if (ret)
- return ret;
-
- ret = call_qop(q, buf_prepare, vb);
- if (ret) {
- dprintk(1, "qbuf: buffer preparation failed\n");
- return ret;
- }
-
/*
* Add to the queued buffers list, a buffer will stay on it until
* dequeued in dqbuf.
@@ -918,6 +1135,9 @@
if (q->streaming)
__enqueue_in_driver(vb);
+ /* Fill buffer information for the userspace */
+ __fill_v4l2_buffer(vb, b);
+
dprintk(1, "qbuf of buffer %d succeeded\n", vb->v4l2_buf.index);
return 0;
}
@@ -1347,6 +1567,37 @@
}
EXPORT_SYMBOL_GPL(vb2_mmap);
+#ifndef CONFIG_MMU
+unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
+ unsigned long addr,
+ unsigned long len,
+ unsigned long pgoff,
+ unsigned long flags)
+{
+ unsigned long off = pgoff << PAGE_SHIFT;
+ struct vb2_buffer *vb;
+ unsigned int buffer, plane;
+ int ret;
+
+ if (q->memory != V4L2_MEMORY_MMAP) {
+ dprintk(1, "Queue is not currently set up for mmap\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Find the plane corresponding to the offset passed by userspace.
+ */
+ ret = __find_plane_by_offset(q, off, &buffer, &plane);
+ if (ret)
+ return ret;
+
+ vb = q->bufs[buffer];
+
+ return (unsigned long)vb2_plane_vaddr(vb, plane);
+}
+EXPORT_SYMBOL_GPL(vb2_get_unmapped_area);
+#endif
+
static int __vb2_init_fileio(struct vb2_queue *q, int read);
static int __vb2_cleanup_fileio(struct vb2_queue *q);
@@ -1464,7 +1715,7 @@
{
__vb2_cleanup_fileio(q);
__vb2_queue_cancel(q);
- __vb2_queue_free(q);
+ __vb2_queue_free(q, q->num_buffers);
}
EXPORT_SYMBOL_GPL(vb2_queue_release);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 7cf94c0..7d754fb 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -650,9 +650,9 @@
/* ------------------------------------------------------------------
Videobuf operations
------------------------------------------------------------------*/
-static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
- unsigned int *nplanes, unsigned int sizes[],
- void *alloc_ctxs[])
+static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
{
struct vivi_dev *dev = vb2_get_drv_priv(vq);
unsigned long size;
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a67adcb..f1391c2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2,23 +2,8 @@
# Multifunction miscellaneous devices
#
-menuconfig MFD_SUPPORT
- bool "Multifunction device drivers"
- depends on HAS_IOMEM
- default y
- help
- Multifunction devices embed several functions (e.g. GPIOs,
- touchscreens, keyboards, current regulators, power management chips,
- etc...) in one single integrated circuit. They usually talk to the
- main CPU through one or more IRQ lines and low speed data busses (SPI,
- I2C, etc..). They appear as one single device to the main system
- through the data bus and the MFD framework allows for sub devices
- (a.k.a. functions) to appear as discrete platform devices.
- MFDs are typically found on embedded platforms.
-
- This option alone does not add any kernel code.
-
-if MFD_SUPPORT
+if HAS_IOMEM
+menu "Multifunction device drivers"
config MFD_CORE
tristate
@@ -390,6 +375,7 @@
tristate "Support Wolfson Microelectronics WM8400"
select MFD_CORE
depends on I2C
+ select REGMAP_I2C
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
CODEC. This driver provides common support for accessing
@@ -503,6 +489,7 @@
config MFD_PCF50633
tristate "Support for NXP PCF50633"
depends on I2C
+ select REGMAP_I2C
help
Say yes here if you have NXP PCF50633 chip on your board.
This core driver provides register access and IRQ handling
@@ -579,6 +566,23 @@
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
+config AB5500_CORE
+ bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
+ depends on ABX500_CORE && MFD_DB5500_PRCMU
+ select MFD_CORE
+ help
+ Select this option to enable access to AB5500 power management
+ chip. This connects to the db5500 chip via the I2C bus via PRCMU.
+ This chip embeds various other multimedia funtionalities as well.
+
+config AB5500_DEBUG
+ bool "Enable debug info via debugfs"
+ depends on AB5500_CORE && DEBUG_FS
+ default y if DEBUG_FS
+ help
+ Select this option if you want debug information from the AB5500
+ using the debug filesystem, debugfs.
+
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE
@@ -615,20 +619,6 @@
help
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
-config AB3550_CORE
- bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
- select MFD_CORE
- depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
- help
- Select this to enable the AB3550 Mixed Signal IC core
- functionality. This connects to a AB3550 on the I2C bus
- and expose a number of symbols needed for dependent devices
- to read and write registers and subscribe to events from
- this multi-functional IC. This is needed to use other features
- of the AB3550 such as battery-backed RTC, charging control,
- LEDs, vibrator, system power and temperature, power management
- and ALSA sound.
-
config MFD_DB8500_PRCMU
bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
depends on UX500_SOC_DB8500
@@ -773,7 +763,17 @@
additional drivers must be enabled in order to use the
functionality of the device.
-endif # MFD_SUPPORT
+config MFD_INTEL_MSIC
+ bool "Support for Intel MSIC"
+ depends on INTEL_SCU_IPC
+ select MFD_CORE
+ help
+ Select this option to enable access to Intel MSIC (Avatele
+ Passage) chip. This chip embeds audio, battery, GPIO, etc.
+ devices used in Intel Medfield platforms.
+
+endmenu
+endif
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c580203..b2292eb 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -79,7 +79,8 @@
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
-obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
+obj-$(CONFIG_AB5500_CORE) += ab5500-core.o
+obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
@@ -102,3 +103,4 @@
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index 345dc65..02c4201 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -295,7 +295,7 @@
{
struct aat2870_data *aat2870 = file->private_data;
char buf[32];
- int buf_size;
+ ssize_t buf_size;
char *start = buf;
unsigned long addr, val;
int ret;
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index a20e1c4..4f57255 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -809,7 +809,7 @@
char *name;
};
-static const struct ab_family_id ids[] __devinitdata = {
+static const struct ab_family_id ids[] __devinitconst = {
/* AB3100 */
{
.id = 0xc0,
diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c
deleted file mode 100644
index 56ba194..0000000
--- a/drivers/mfd/ab3550-core.c
+++ /dev/null
@@ -1,1380 +0,0 @@
-/*
- * Copyright (C) 2007-2010 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB3550 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/workqueue.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <linux/mfd/abx500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-
-#define AB3550_NAME_STRING "ab3550"
-#define AB3550_ID_FORMAT_STRING "AB3550 %s"
-#define AB3550_NUM_BANKS 2
-#define AB3550_NUM_EVENT_REG 5
-
-/* These are the only registers inside AB3550 used in this main file */
-
-/* Chip ID register */
-#define AB3550_CID_REG 0x20
-
-/* Interrupt event registers */
-#define AB3550_EVENT_BANK 0
-#define AB3550_EVENT_REG 0x22
-
-/* Read/write operation values. */
-#define AB3550_PERM_RD (0x01)
-#define AB3550_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB3550_PERM_RO (AB3550_PERM_RD)
-#define AB3550_PERM_RW (AB3550_PERM_RD | AB3550_PERM_WR)
-
-/**
- * struct ab3550
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @i2c_client: I2C client for this chip
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @mask_work: a worker for writing to mask registers
- * @event_lock: a lock to protect the event_mask
- * @event_mask: a local copy of the mask event registers
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab3550 {
- struct mutex access_mutex;
- struct i2c_client *i2c_client[AB3550_NUM_BANKS];
- char chip_name[32];
- u8 chip_id;
- struct work_struct mask_work;
- spinlock_t event_lock;
- u8 event_mask[AB3550_NUM_EVENT_REG];
- u8 startup_events[AB3550_NUM_EVENT_REG];
- bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
- unsigned int debug_bank;
- unsigned int debug_address;
-#endif
-};
-
-/**
- * struct ab3550_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab3550_reg_range {
- u8 first;
- u8 last;
- u8 perm;
-};
-
-/**
- * struct ab3550_reg_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab3550_reg_ranges {
- u8 count;
- const struct ab3550_reg_range *range;
-};
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used). Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-
-static struct
-ab3550_reg_ranges ab3550_reg_ranges[AB3550_NUM_DEVICES][AB3550_NUM_BANKS] = {
- [AB3550_DEVID_DAC] = {
- NO_RANGE,
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0xb0,
- .last = 0xba,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0xbc,
- .last = 0xc3,
- .perm = AB3550_PERM_RW,
- },
- },
- },
- },
- [AB3550_DEVID_LEDS] = {
- NO_RANGE,
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x5a,
- .last = 0x88,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0x8a,
- .last = 0xad,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- },
- [AB3550_DEVID_POWER] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- NO_RANGE,
- },
- [AB3550_DEVID_REGULATORS] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x69,
- .last = 0xa3,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x14,
- .last = 0x16,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- },
- [AB3550_DEVID_SIM] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x14,
- .last = 0x17,
- .perm = AB3550_PERM_RW,
- },
- }
-
- },
- },
- [AB3550_DEVID_UART] = {
- NO_RANGE,
- NO_RANGE,
- },
- [AB3550_DEVID_RTC] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0c,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- NO_RANGE,
- },
- [AB3550_DEVID_CHARGER] = {
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x10,
- .last = 0x1a,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- NO_RANGE,
- },
- [AB3550_DEVID_ADC] = {
- NO_RANGE,
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x20,
- .last = 0x56,
- .perm = AB3550_PERM_RW,
- },
-
- }
- },
- },
- [AB3550_DEVID_FUELGAUGE] = {
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x21,
- .last = 0x21,
- .perm = AB3550_PERM_RO,
- },
- }
- },
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0e,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- },
- [AB3550_DEVID_VIBRATOR] = {
- NO_RANGE,
- {
- .count = 1,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x10,
- .last = 0x13,
- .perm = AB3550_PERM_RW,
- },
-
- }
- },
- },
- [AB3550_DEVID_CODEC] = {
- {
- .count = 2,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x31,
- .last = 0x63,
- .perm = AB3550_PERM_RW,
- },
- {
- .first = 0x65,
- .last = 0x68,
- .perm = AB3550_PERM_RW,
- },
- }
- },
- NO_RANGE,
- },
-};
-
-static struct mfd_cell ab3550_devs[AB3550_NUM_DEVICES] = {
- [AB3550_DEVID_DAC] = {
- .name = "ab3550-dac",
- .id = AB3550_DEVID_DAC,
- .num_resources = 0,
- },
- [AB3550_DEVID_LEDS] = {
- .name = "ab3550-leds",
- .id = AB3550_DEVID_LEDS,
- },
- [AB3550_DEVID_POWER] = {
- .name = "ab3550-power",
- .id = AB3550_DEVID_POWER,
- },
- [AB3550_DEVID_REGULATORS] = {
- .name = "ab3550-regulators",
- .id = AB3550_DEVID_REGULATORS,
- },
- [AB3550_DEVID_SIM] = {
- .name = "ab3550-sim",
- .id = AB3550_DEVID_SIM,
- },
- [AB3550_DEVID_UART] = {
- .name = "ab3550-uart",
- .id = AB3550_DEVID_UART,
- },
- [AB3550_DEVID_RTC] = {
- .name = "ab3550-rtc",
- .id = AB3550_DEVID_RTC,
- },
- [AB3550_DEVID_CHARGER] = {
- .name = "ab3550-charger",
- .id = AB3550_DEVID_CHARGER,
- },
- [AB3550_DEVID_ADC] = {
- .name = "ab3550-adc",
- .id = AB3550_DEVID_ADC,
- .num_resources = 10,
- .resources = (struct resource[]) {
- {
- .name = "TRIGGER-0",
- .flags = IORESOURCE_IRQ,
- .start = 16,
- .end = 16,
- },
- {
- .name = "TRIGGER-1",
- .flags = IORESOURCE_IRQ,
- .start = 17,
- .end = 17,
- },
- {
- .name = "TRIGGER-2",
- .flags = IORESOURCE_IRQ,
- .start = 18,
- .end = 18,
- },
- {
- .name = "TRIGGER-3",
- .flags = IORESOURCE_IRQ,
- .start = 19,
- .end = 19,
- },
- {
- .name = "TRIGGER-4",
- .flags = IORESOURCE_IRQ,
- .start = 20,
- .end = 20,
- },
- {
- .name = "TRIGGER-5",
- .flags = IORESOURCE_IRQ,
- .start = 21,
- .end = 21,
- },
- {
- .name = "TRIGGER-6",
- .flags = IORESOURCE_IRQ,
- .start = 22,
- .end = 22,
- },
- {
- .name = "TRIGGER-7",
- .flags = IORESOURCE_IRQ,
- .start = 23,
- .end = 23,
- },
- {
- .name = "TRIGGER-VBAT-TXON",
- .flags = IORESOURCE_IRQ,
- .start = 13,
- .end = 13,
- },
- {
- .name = "TRIGGER-VBAT",
- .flags = IORESOURCE_IRQ,
- .start = 12,
- .end = 12,
- },
- },
- },
- [AB3550_DEVID_FUELGAUGE] = {
- .name = "ab3550-fuelgauge",
- .id = AB3550_DEVID_FUELGAUGE,
- },
- [AB3550_DEVID_VIBRATOR] = {
- .name = "ab3550-vibrator",
- .id = AB3550_DEVID_VIBRATOR,
- },
- [AB3550_DEVID_CODEC] = {
- .name = "ab3550-codec",
- .id = AB3550_DEVID_CODEC,
- },
-};
-
-/*
- * I2C transactions with error messages.
- */
-static int ab3550_i2c_master_send(struct ab3550 *ab, u8 bank, u8 *data,
- u8 count)
-{
- int err;
-
- err = i2c_master_send(ab->i2c_client[bank], data, count);
- if (err < 0) {
- dev_err(&ab->i2c_client[0]->dev, "send error: %d\n", err);
- return err;
- }
- return 0;
-}
-
-static int ab3550_i2c_master_recv(struct ab3550 *ab, u8 bank, u8 *data,
- u8 count)
-{
- int err;
-
- err = i2c_master_recv(ab->i2c_client[bank], data, count);
- if (err < 0) {
- dev_err(&ab->i2c_client[0]->dev, "receive error: %d\n", err);
- return err;
- }
- return 0;
-}
-
-/*
- * Functionality for getting/setting register values.
- */
-static int get_register_interruptible(struct ab3550 *ab, u8 bank, u8 reg,
- u8 *value)
-{
- int err;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- err = ab3550_i2c_master_send(ab, bank, ®, 1);
- if (!err)
- err = ab3550_i2c_master_recv(ab, bank, value, 1);
-
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-static int get_register_page_interruptible(struct ab3550 *ab, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- int err;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- err = ab3550_i2c_master_send(ab, bank, &first_reg, 1);
- if (!err)
- err = ab3550_i2c_master_recv(ab, bank, regvals, numregs);
-
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-static int mask_and_set_register_interruptible(struct ab3550 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues)
-{
- int err = 0;
-
- if (likely(bitmask)) {
- u8 reg_bits[2] = {reg, 0};
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- if (bitmask == 0xFF) /* No need to read in this case. */
- reg_bits[1] = bitvalues;
- else { /* Read and modify the register value. */
- u8 bits;
-
- err = ab3550_i2c_master_send(ab, bank, ®, 1);
- if (err)
- goto unlock_and_return;
- err = ab3550_i2c_master_recv(ab, bank, &bits, 1);
- if (err)
- goto unlock_and_return;
- reg_bits[1] = ((~bitmask & bits) |
- (bitmask & bitvalues));
- }
- /* Write the new value. */
- err = ab3550_i2c_master_send(ab, bank, reg_bits, 2);
-unlock_and_return:
- mutex_unlock(&ab->access_mutex);
- }
- return err;
-}
-
-/*
- * Read/write permission checking functions.
- */
-static bool page_write_allowed(const struct ab3550_reg_ranges *ranges,
- u8 first_reg, u8 last_reg)
-{
- u8 i;
-
- if (last_reg < first_reg)
- return false;
-
- for (i = 0; i < ranges->count; i++) {
- if (first_reg < ranges->range[i].first)
- break;
- if ((last_reg <= ranges->range[i].last) &&
- (ranges->range[i].perm & AB3550_PERM_WR))
- return true;
- }
- return false;
-}
-
-static bool reg_write_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
- return page_write_allowed(ranges, reg, reg);
-}
-
-static bool page_read_allowed(const struct ab3550_reg_ranges *ranges,
- u8 first_reg, u8 last_reg)
-{
- u8 i;
-
- if (last_reg < first_reg)
- return false;
- /* Find the range (if it exists in the list) that includes first_reg. */
- for (i = 0; i < ranges->count; i++) {
- if (first_reg < ranges->range[i].first)
- return false;
- if (first_reg <= ranges->range[i].last)
- break;
- }
- /* Make sure that the entire range up to and including last_reg is
- * readable. This may span several of the ranges in the list.
- */
- while ((i < ranges->count) &&
- (ranges->range[i].perm & AB3550_PERM_RD)) {
- if (last_reg <= ranges->range[i].last)
- return true;
- if ((++i >= ranges->count) ||
- (ranges->range[i].first !=
- (ranges->range[i - 1].last + 1))) {
- break;
- }
- }
- return false;
-}
-
-static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg)
-{
- return page_read_allowed(ranges, reg, reg);
-}
-
-/*
- * The register access functionality.
- */
-static int ab3550_get_chip_id(struct device *dev)
-{
- struct ab3550 *ab = dev_get_drvdata(dev->parent);
- return (int)ab->chip_id;
-}
-
-static int ab3550_mask_and_set_register_interruptible(struct device *dev,
- u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
-{
- struct ab3550 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB3550_NUM_BANKS <= bank) ||
- !reg_write_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return mask_and_set_register_interruptible(ab, bank, reg,
- bitmask, bitvalues);
-}
-
-static int ab3550_set_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 value)
-{
- return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
- value);
-}
-
-static int ab3550_get_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 *value)
-{
- struct ab3550 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB3550_NUM_BANKS <= bank) ||
- !reg_read_allowed(&ab3550_reg_ranges[pdev->id][bank], reg))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return get_register_interruptible(ab, bank, reg, value);
-}
-
-static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- struct ab3550 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB3550_NUM_BANKS <= bank) ||
- !page_read_allowed(&ab3550_reg_ranges[pdev->id][bank],
- first_reg, (first_reg + numregs - 1)))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return get_register_page_interruptible(ab, bank, first_reg, regvals,
- numregs);
-}
-
-static int ab3550_event_registers_startup_state_get(struct device *dev,
- u8 *event)
-{
- struct ab3550 *ab;
-
- ab = dev_get_drvdata(dev->parent);
- if (!ab->startup_events_read)
- return -EAGAIN; /* Try again later */
-
- memcpy(event, ab->startup_events, AB3550_NUM_EVENT_REG);
- return 0;
-}
-
-static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq)
-{
- struct ab3550 *ab;
- struct ab3550_platform_data *plf_data;
- bool val;
-
- ab = irq_get_chip_data(irq);
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq -= plf_data->irq.base;
- val = ((ab->startup_events[irq / 8] & BIT(irq % 8)) != 0);
-
- return val;
-}
-
-static struct abx500_ops ab3550_ops = {
- .get_chip_id = ab3550_get_chip_id,
- .get_register = ab3550_get_register_interruptible,
- .set_register = ab3550_set_register_interruptible,
- .get_register_page = ab3550_get_register_page_interruptible,
- .set_register_page = NULL,
- .mask_and_set_register = ab3550_mask_and_set_register_interruptible,
- .event_registers_startup_state_get =
- ab3550_event_registers_startup_state_get,
- .startup_irq_enabled = ab3550_startup_irq_enabled,
-};
-
-static irqreturn_t ab3550_irq_handler(int irq, void *data)
-{
- struct ab3550 *ab = data;
- int err;
- unsigned int i;
- u8 e[AB3550_NUM_EVENT_REG];
- u8 *events;
- unsigned long flags;
-
- events = (ab->startup_events_read ? e : ab->startup_events);
-
- err = get_register_page_interruptible(ab, AB3550_EVENT_BANK,
- AB3550_EVENT_REG, events, AB3550_NUM_EVENT_REG);
- if (err)
- goto err_event_rd;
-
- if (!ab->startup_events_read) {
- dev_info(&ab->i2c_client[0]->dev,
- "startup events 0x%x,0x%x,0x%x,0x%x,0x%x\n",
- ab->startup_events[0], ab->startup_events[1],
- ab->startup_events[2], ab->startup_events[3],
- ab->startup_events[4]);
- ab->startup_events_read = true;
- goto out;
- }
-
- /* The two highest bits in event[4] are not used. */
- events[4] &= 0x3f;
-
- spin_lock_irqsave(&ab->event_lock, flags);
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
- events[i] &= ~ab->event_mask[i];
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
- u8 bit;
- u8 event_reg;
-
- dev_dbg(&ab->i2c_client[0]->dev, "IRQ Event[%d]: 0x%2x\n",
- i, events[i]);
-
- event_reg = events[i];
- for (bit = 0; event_reg; bit++, event_reg /= 2) {
- if (event_reg % 2) {
- unsigned int irq;
- struct ab3550_platform_data *plf_data;
-
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq = plf_data->irq.base + (i * 8) + bit;
- handle_nested_irq(irq);
- }
- }
- }
-out:
- return IRQ_HANDLED;
-
-err_event_rd:
- dev_dbg(&ab->i2c_client[0]->dev, "error reading event registers\n");
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static struct ab3550_reg_ranges debug_ranges[AB3550_NUM_BANKS] = {
- {
- .count = 6,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0e,
- },
- {
- .first = 0x10,
- .last = 0x1a,
- },
- {
- .first = 0x1e,
- .last = 0x4f,
- },
- {
- .first = 0x51,
- .last = 0x63,
- },
- {
- .first = 0x65,
- .last = 0xa3,
- },
- {
- .first = 0xa5,
- .last = 0xa8,
- },
- }
- },
- {
- .count = 8,
- .range = (struct ab3550_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0e,
- },
- {
- .first = 0x10,
- .last = 0x17,
- },
- {
- .first = 0x1a,
- .last = 0x1c,
- },
- {
- .first = 0x20,
- .last = 0x56,
- },
- {
- .first = 0x5a,
- .last = 0x88,
- },
- {
- .first = 0x8a,
- .last = 0xad,
- },
- {
- .first = 0xb0,
- .last = 0xba,
- },
- {
- .first = 0xbc,
- .last = 0xc3,
- },
- }
- },
-};
-
-static int ab3550_registers_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
- int bank;
-
- seq_printf(s, AB3550_NAME_STRING " register values:\n");
-
- for (bank = 0; bank < AB3550_NUM_BANKS; bank++) {
- unsigned int i;
-
- seq_printf(s, " bank %d:\n", bank);
- for (i = 0; i < debug_ranges[bank].count; i++) {
- u8 reg;
-
- for (reg = debug_ranges[bank].range[i].first;
- reg <= debug_ranges[bank].range[i].last;
- reg++) {
- u8 value;
-
- get_register_interruptible(ab, bank, reg,
- &value);
- seq_printf(s, " [%d/0x%02X]: 0x%02X\n", bank,
- reg, value);
- }
- }
- }
- return 0;
-}
-
-static int ab3550_registers_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_registers_print, inode->i_private);
-}
-
-static const struct file_operations ab3550_registers_fops = {
- .open = ab3550_registers_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int ab3550_bank_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
-
- seq_printf(s, "%d\n", ab->debug_bank);
- return 0;
-}
-
-static int ab3550_bank_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_bank_print, inode->i_private);
-}
-
-static ssize_t ab3550_bank_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- unsigned long user_bank;
- int err;
-
- /* Get userspace string and assure termination */
- err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
- if (err)
- return err;
-
- if (user_bank >= AB3550_NUM_BANKS) {
- dev_err(&ab->i2c_client[0]->dev,
- "debugfs error input > number of banks\n");
- return -EINVAL;
- }
-
- ab->debug_bank = user_bank;
-
- return count;
-}
-
-static int ab3550_address_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
-
- seq_printf(s, "0x%02X\n", ab->debug_address);
- return 0;
-}
-
-static int ab3550_address_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_address_print, inode->i_private);
-}
-
-static ssize_t ab3550_address_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- unsigned long user_address;
- int err;
-
- /* Get userspace string and assure termination */
- err = kstrtoul_from_user(user_buf, count, 0, &user_address);
- if (err)
- return err;
-
- if (user_address > 0xff) {
- dev_err(&ab->i2c_client[0]->dev,
- "debugfs error input > 0xff\n");
- return -EINVAL;
- }
- ab->debug_address = user_address;
- return count;
-}
-
-static int ab3550_val_print(struct seq_file *s, void *p)
-{
- struct ab3550 *ab = s->private;
- int err;
- u8 regvalue;
-
- err = get_register_interruptible(ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, ®value);
- if (err)
- return -EINVAL;
- seq_printf(s, "0x%02X\n", regvalue);
-
- return 0;
-}
-
-static int ab3550_val_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3550_val_print, inode->i_private);
-}
-
-static ssize_t ab3550_val_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private;
- unsigned long user_val;
- int err;
- u8 regvalue;
-
- /* Get userspace string and assure termination */
- err = kstrtoul_from_user(user_buf, count, 0, &user_val);
- if (err)
- return err;
-
- if (user_val > 0xff) {
- dev_err(&ab->i2c_client[0]->dev,
- "debugfs error input > 0xff\n");
- return -EINVAL;
- }
- err = mask_and_set_register_interruptible(
- ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, 0xFF, (u8)user_val);
- if (err)
- return -EINVAL;
-
- get_register_interruptible(ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, ®value);
- if (err)
- return -EINVAL;
-
- return count;
-}
-
-static const struct file_operations ab3550_bank_fops = {
- .open = ab3550_bank_open,
- .write = ab3550_bank_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_address_fops = {
- .open = ab3550_address_open,
- .write = ab3550_address_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static const struct file_operations ab3550_val_fops = {
- .open = ab3550_val_open,
- .write = ab3550_val_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static struct dentry *ab3550_dir;
-static struct dentry *ab3550_reg_file;
-static struct dentry *ab3550_bank_file;
-static struct dentry *ab3550_address_file;
-static struct dentry *ab3550_val_file;
-
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
- ab->debug_bank = 0;
- ab->debug_address = 0x00;
-
- ab3550_dir = debugfs_create_dir(AB3550_NAME_STRING, NULL);
- if (!ab3550_dir)
- goto exit_no_debugfs;
-
- ab3550_reg_file = debugfs_create_file("all-registers",
- S_IRUGO, ab3550_dir, ab, &ab3550_registers_fops);
- if (!ab3550_reg_file)
- goto exit_destroy_dir;
-
- ab3550_bank_file = debugfs_create_file("register-bank",
- (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_bank_fops);
- if (!ab3550_bank_file)
- goto exit_destroy_reg;
-
- ab3550_address_file = debugfs_create_file("register-address",
- (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_address_fops);
- if (!ab3550_address_file)
- goto exit_destroy_bank;
-
- ab3550_val_file = debugfs_create_file("register-value",
- (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_val_fops);
- if (!ab3550_val_file)
- goto exit_destroy_address;
-
- return;
-
-exit_destroy_address:
- debugfs_remove(ab3550_address_file);
-exit_destroy_bank:
- debugfs_remove(ab3550_bank_file);
-exit_destroy_reg:
- debugfs_remove(ab3550_reg_file);
-exit_destroy_dir:
- debugfs_remove(ab3550_dir);
-exit_no_debugfs:
- dev_err(&ab->i2c_client[0]->dev, "failed to create debugfs entries.\n");
- return;
-}
-
-static inline void ab3550_remove_debugfs(void)
-{
- debugfs_remove(ab3550_val_file);
- debugfs_remove(ab3550_address_file);
- debugfs_remove(ab3550_bank_file);
- debugfs_remove(ab3550_reg_file);
- debugfs_remove(ab3550_dir);
-}
-
-#else /* !CONFIG_DEBUG_FS */
-static inline void ab3550_setup_debugfs(struct ab3550 *ab)
-{
-}
-static inline void ab3550_remove_debugfs(void)
-{
-}
-#endif
-
-/*
- * Basic set-up, datastructure creation/destruction and I2C interface.
- * This sets up a default config in the AB3550 chip so that it
- * will work as expected.
- */
-static int __init ab3550_setup(struct ab3550 *ab)
-{
- int err = 0;
- int i;
- struct ab3550_platform_data *plf_data;
- struct abx500_init_settings *settings;
-
- plf_data = ab->i2c_client[0]->dev.platform_data;
- settings = plf_data->init_settings;
-
- for (i = 0; i < plf_data->init_settings_sz; i++) {
- err = mask_and_set_register_interruptible(ab,
- settings[i].bank,
- settings[i].reg,
- 0xFF, settings[i].setting);
- if (err)
- goto exit_no_setup;
-
- /* If event mask register update the event mask in ab3550 */
- if ((settings[i].bank == 0) &&
- (AB3550_IMR1 <= settings[i].reg) &&
- (settings[i].reg <= AB3550_IMR5)) {
- ab->event_mask[settings[i].reg - AB3550_IMR1] =
- settings[i].setting;
- }
- }
-exit_no_setup:
- return err;
-}
-
-static void ab3550_mask_work(struct work_struct *work)
-{
- struct ab3550 *ab = container_of(work, struct ab3550, mask_work);
- int i;
- unsigned long flags;
- u8 mask[AB3550_NUM_EVENT_REG];
-
- spin_lock_irqsave(&ab->event_lock, flags);
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++)
- mask[i] = ab->event_mask[i];
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- for (i = 0; i < AB3550_NUM_EVENT_REG; i++) {
- int err;
-
- err = mask_and_set_register_interruptible(ab, 0,
- (AB3550_IMR1 + i), ~0, mask[i]);
- if (err)
- dev_err(&ab->i2c_client[0]->dev,
- "ab3550_mask_work failed 0x%x,0x%x\n",
- (AB3550_IMR1 + i), mask[i]);
- }
-}
-
-static void ab3550_mask(struct irq_data *data)
-{
- unsigned long flags;
- struct ab3550 *ab;
- struct ab3550_platform_data *plf_data;
- int irq;
-
- ab = irq_data_get_irq_chip_data(data);
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq = data->irq - plf_data->irq.base;
-
- spin_lock_irqsave(&ab->event_lock, flags);
- ab->event_mask[irq / 8] |= BIT(irq % 8);
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- schedule_work(&ab->mask_work);
-}
-
-static void ab3550_unmask(struct irq_data *data)
-{
- unsigned long flags;
- struct ab3550 *ab;
- struct ab3550_platform_data *plf_data;
- int irq;
-
- ab = irq_data_get_irq_chip_data(data);
- plf_data = ab->i2c_client[0]->dev.platform_data;
- irq = data->irq - plf_data->irq.base;
-
- spin_lock_irqsave(&ab->event_lock, flags);
- ab->event_mask[irq / 8] &= ~BIT(irq % 8);
- spin_unlock_irqrestore(&ab->event_lock, flags);
-
- schedule_work(&ab->mask_work);
-}
-
-static void noop(struct irq_data *data)
-{
-}
-
-static struct irq_chip ab3550_irq_chip = {
- .name = "ab3550-core", /* Keep the same name as the request */
- .irq_disable = ab3550_mask, /* No default to mask in chip.c */
- .irq_ack = noop,
- .irq_mask = ab3550_mask,
- .irq_unmask = ab3550_unmask,
-};
-
-struct ab_family_id {
- u8 id;
- char *name;
-};
-
-static const struct ab_family_id ids[] __initdata = {
- /* AB3550 */
- {
- .id = AB3550_P1A,
- .name = "P1A"
- },
- /* Terminator */
- {
- .id = 0x00,
- }
-};
-
-static int __init ab3550_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct ab3550 *ab;
- struct ab3550_platform_data *ab3550_plf_data =
- client->dev.platform_data;
- int err;
- int i;
- int num_i2c_clients = 0;
-
- ab = kzalloc(sizeof(struct ab3550), GFP_KERNEL);
- if (!ab) {
- dev_err(&client->dev,
- "could not allocate " AB3550_NAME_STRING " device\n");
- return -ENOMEM;
- }
-
- /* Initialize data structure */
- mutex_init(&ab->access_mutex);
- spin_lock_init(&ab->event_lock);
- ab->i2c_client[0] = client;
-
- i2c_set_clientdata(client, ab);
-
- /* Read chip ID register */
- err = get_register_interruptible(ab, 0, AB3550_CID_REG, &ab->chip_id);
- if (err) {
- dev_err(&client->dev, "could not communicate with the analog "
- "baseband chip\n");
- goto exit_no_detect;
- }
-
- for (i = 0; ids[i].id != 0x0; i++) {
- if (ids[i].id == ab->chip_id) {
- snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
- AB3550_ID_FORMAT_STRING, ids[i].name);
- break;
- }
- }
-
- if (ids[i].id == 0x0) {
- dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
- ab->chip_id);
- dev_err(&client->dev, "driver not started!\n");
- goto exit_no_detect;
- }
-
- dev_info(&client->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
-
- /* Attach other dummy I2C clients. */
- while (++num_i2c_clients < AB3550_NUM_BANKS) {
- ab->i2c_client[num_i2c_clients] =
- i2c_new_dummy(client->adapter,
- (client->addr + num_i2c_clients));
- if (!ab->i2c_client[num_i2c_clients]) {
- err = -ENOMEM;
- goto exit_no_dummy_client;
- }
- strlcpy(ab->i2c_client[num_i2c_clients]->name, id->name,
- sizeof(ab->i2c_client[num_i2c_clients]->name));
- }
-
- err = ab3550_setup(ab);
- if (err)
- goto exit_no_setup;
-
- INIT_WORK(&ab->mask_work, ab3550_mask_work);
-
- for (i = 0; i < ab3550_plf_data->irq.count; i++) {
- unsigned int irq;
-
- irq = ab3550_plf_data->irq.base + i;
- irq_set_chip_data(irq, ab);
- irq_set_chip_and_handler(irq, &ab3550_irq_chip,
- handle_simple_irq);
- irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
- set_irq_flags(irq, IRQF_VALID);
-#else
- irq_set_noprobe(irq);
-#endif
- }
-
- err = request_threaded_irq(client->irq, NULL, ab3550_irq_handler,
- IRQF_ONESHOT, "ab3550-core", ab);
- /* This real unpredictable IRQ is of course sampled for entropy */
- rand_initialize_irq(client->irq);
-
- if (err)
- goto exit_no_irq;
-
- err = abx500_register_ops(&client->dev, &ab3550_ops);
- if (err)
- goto exit_no_ops;
-
- /* Set up and register the platform devices. */
- for (i = 0; i < AB3550_NUM_DEVICES; i++) {
- ab3550_devs[i].platform_data = ab3550_plf_data->dev_data[i];
- ab3550_devs[i].pdata_size = ab3550_plf_data->dev_data_sz[i];
- }
-
- err = mfd_add_devices(&client->dev, 0, ab3550_devs,
- ARRAY_SIZE(ab3550_devs), NULL,
- ab3550_plf_data->irq.base);
-
- ab3550_setup_debugfs(ab);
-
- return 0;
-
-exit_no_ops:
-exit_no_irq:
-exit_no_setup:
-exit_no_dummy_client:
- /* Unregister the dummy i2c clients. */
- while (--num_i2c_clients)
- i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-exit_no_detect:
- kfree(ab);
- return err;
-}
-
-static int __exit ab3550_remove(struct i2c_client *client)
-{
- struct ab3550 *ab = i2c_get_clientdata(client);
- int num_i2c_clients = AB3550_NUM_BANKS;
-
- mfd_remove_devices(&client->dev);
- ab3550_remove_debugfs();
-
- while (--num_i2c_clients)
- i2c_unregister_device(ab->i2c_client[num_i2c_clients]);
-
- /*
- * At this point, all subscribers should have unregistered
- * their notifiers so deactivate IRQ
- */
- free_irq(client->irq, ab);
- kfree(ab);
- return 0;
-}
-
-static const struct i2c_device_id ab3550_id[] = {
- {AB3550_NAME_STRING, 0},
- {}
-};
-MODULE_DEVICE_TABLE(i2c, ab3550_id);
-
-static struct i2c_driver ab3550_driver = {
- .driver = {
- .name = AB3550_NAME_STRING,
- .owner = THIS_MODULE,
- },
- .id_table = ab3550_id,
- .probe = ab3550_probe,
- .remove = __exit_p(ab3550_remove),
-};
-
-static int __init ab3550_i2c_init(void)
-{
- return i2c_add_driver(&ab3550_driver);
-}
-
-static void __exit ab3550_i2c_exit(void)
-{
- i2c_del_driver(&ab3550_driver);
-}
-
-subsys_initcall(ab3550_i2c_init);
-module_exit(ab3550_i2c_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB3550 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.c b/drivers/mfd/ab5500-core.c
new file mode 100644
index 0000000..4175544
--- /dev/null
+++ b/drivers/mfd/ab5500-core.c
@@ -0,0 +1,1439 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB5500 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Karl Komierowski <karl.komierowski@stericsson.com>
+ * Author: Bibek Basu <bibek.basu@stericsson.com>
+ *
+ * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
+ */
+
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/random.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/version.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+#define AB5500_NUM_EVENT_REG 23
+#define AB5500_IT_LATCH0_REG 0x40
+#define AB5500_IT_MASK0_REG 0x60
+
+/*
+ * Permissible register ranges for reading and writing per device and bank.
+ *
+ * The ranges must be listed in increasing address order, and no overlaps are
+ * allowed. It is assumed that write permission implies read permission
+ * (i.e. only RO and RW permissions should be used). Ranges with write
+ * permission must not be split up.
+ */
+
+#define NO_RANGE {.count = 0, .range = NULL,}
+static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
+ [AB5500_DEVID_USB] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_USB,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8B,
+ .last = 0x8B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x91,
+ .last = 0x92,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x93,
+ .last = 0x93,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x94,
+ .last = 0x94,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xA8,
+ .last = 0xB0,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB2,
+ .last = 0xB2,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB4,
+ .last = 0xBC,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xBF,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xC5,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_ADC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_ADC,
+ .nranges = 6,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x1F,
+ .last = 0x22,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x23,
+ .last = 0x24,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x26,
+ .last = 0x2D,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x37,
+ .last = 0x57,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x58,
+ .last = 0x58,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_LEDS] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_LED,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_VIDEO] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_VDENC,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x08,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x09,
+ .last = 0x09,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0A,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x15,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x27,
+ .last = 0x2C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x41,
+ .last = 0x41,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x45,
+ .last = 0x5B,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x5D,
+ .last = 0x5D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x69,
+ .last = 0x69,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x6C,
+ .last = 0x6D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x81,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_REGULATORS] = {
+ .nbanks = 2,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x1F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x2E,
+ .last = 0x2E,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x51,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x61,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x66,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8C,
+ .last = 0x96,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xAA,
+ .last = 0xB4,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xB7,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xCA,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xD3,
+ .last = 0xE0,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_SIM] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_RTC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_RTC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x06,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_CHARGER] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_CHG,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x11,
+ .last = 0x11,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x12,
+ .last = 0x1B,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_FUELGAUGE] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_FG_BATTCOM_ACC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0C,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_VIBRATOR] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_VIBRA,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xFE,
+ .last = 0xFE,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_CODEC] = {
+ .nbanks = 1,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x48,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xEB,
+ .last = 0xFB,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+ [AB5500_DEVID_POWER] = {
+ .nbanks = 2,
+ .bank = (struct ab5500_i2c_ranges []) {
+ {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x30,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ {
+ .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ },
+ },
+};
+
+#define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit))
+
+/* I appologize for the resource names beeing a mix of upper case
+ * and lower case but I want them to be exact as the documentation */
+static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
+ [AB5500_DEVID_LEDS] = {
+ .name = "ab5500-leds",
+ .id = AB5500_DEVID_LEDS,
+ },
+ [AB5500_DEVID_POWER] = {
+ .name = "ab5500-power",
+ .id = AB5500_DEVID_POWER,
+ },
+ [AB5500_DEVID_REGULATORS] = {
+ .name = "ab5500-regulator",
+ .id = AB5500_DEVID_REGULATORS,
+ },
+ [AB5500_DEVID_SIM] = {
+ .name = "ab5500-sim",
+ .id = AB5500_DEVID_SIM,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "SIMOFF",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(2, 0), /*rising*/
+ .end = AB5500_IRQ(2, 1), /*falling*/
+ },
+ },
+ },
+ [AB5500_DEVID_RTC] = {
+ .name = "ab5500-rtc",
+ .id = AB5500_DEVID_RTC,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "RTC_Alarm",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 7),
+ .end = AB5500_IRQ(1, 7),
+ }
+ },
+ },
+ [AB5500_DEVID_CHARGER] = {
+ .name = "ab5500-charger",
+ .id = AB5500_DEVID_CHARGER,
+ },
+ [AB5500_DEVID_ADC] = {
+ .name = "ab5500-adc",
+ .id = AB5500_DEVID_ADC,
+ .num_resources = 10,
+ .resources = (struct resource[]) {
+ {
+ .name = "TRIGGER-0",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 0),
+ .end = AB5500_IRQ(0, 0),
+ },
+ {
+ .name = "TRIGGER-1",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 1),
+ .end = AB5500_IRQ(0, 1),
+ },
+ {
+ .name = "TRIGGER-2",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 2),
+ .end = AB5500_IRQ(0, 2),
+ },
+ {
+ .name = "TRIGGER-3",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 3),
+ .end = AB5500_IRQ(0, 3),
+ },
+ {
+ .name = "TRIGGER-4",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 4),
+ .end = AB5500_IRQ(0, 4),
+ },
+ {
+ .name = "TRIGGER-5",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 5),
+ .end = AB5500_IRQ(0, 5),
+ },
+ {
+ .name = "TRIGGER-6",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 6),
+ .end = AB5500_IRQ(0, 6),
+ },
+ {
+ .name = "TRIGGER-7",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 7),
+ .end = AB5500_IRQ(0, 7),
+ },
+ {
+ .name = "TRIGGER-VBAT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 8),
+ .end = AB5500_IRQ(0, 8),
+ },
+ {
+ .name = "TRIGGER-VBAT-TXON",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(0, 9),
+ .end = AB5500_IRQ(0, 9),
+ },
+ },
+ },
+ [AB5500_DEVID_FUELGAUGE] = {
+ .name = "ab5500-fuelgauge",
+ .id = AB5500_DEVID_FUELGAUGE,
+ .num_resources = 6,
+ .resources = (struct resource[]) {
+ {
+ .name = "Batt_attach",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 5),
+ .end = AB5500_IRQ(7, 5),
+ },
+ {
+ .name = "Batt_removal",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 6),
+ .end = AB5500_IRQ(7, 6),
+ },
+ {
+ .name = "UART_framing",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(7, 7),
+ .end = AB5500_IRQ(7, 7),
+ },
+ {
+ .name = "UART_overrun",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 0),
+ .end = AB5500_IRQ(8, 0),
+ },
+ {
+ .name = "UART_Rdy_RX",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 1),
+ .end = AB5500_IRQ(8, 1),
+ },
+ {
+ .name = "UART_Rdy_TX",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 2),
+ .end = AB5500_IRQ(8, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_VIBRATOR] = {
+ .name = "ab5500-vibrator",
+ .id = AB5500_DEVID_VIBRATOR,
+ },
+ [AB5500_DEVID_CODEC] = {
+ .name = "ab5500-codec",
+ .id = AB5500_DEVID_CODEC,
+ .num_resources = 3,
+ .resources = (struct resource[]) {
+ {
+ .name = "audio_spkr1_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 5),
+ .end = AB5500_IRQ(9, 5),
+ },
+ {
+ .name = "audio_plllocked",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 6),
+ .end = AB5500_IRQ(9, 6),
+ },
+ {
+ .name = "audio_spkr2_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 4),
+ .end = AB5500_IRQ(17, 4),
+ },
+ },
+ },
+ [AB5500_DEVID_USB] = {
+ .name = "ab5500-usb",
+ .id = AB5500_DEVID_USB,
+ .num_resources = 36,
+ .resources = (struct resource[]) {
+ {
+ .name = "Link_Update",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(22, 1),
+ .end = AB5500_IRQ(22, 1),
+ },
+ {
+ .name = "DCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 3),
+ .end = AB5500_IRQ(8, 4),
+ },
+ {
+ .name = "VBUS_R",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 5),
+ .end = AB5500_IRQ(8, 5),
+ },
+ {
+ .name = "VBUS_F",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 6),
+ .end = AB5500_IRQ(8, 6),
+ },
+ {
+ .name = "CHGstate_10_PCVBUSchg",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(8, 7),
+ .end = AB5500_IRQ(8, 7),
+ },
+ {
+ .name = "DCIOreverse_ovc",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 0),
+ .end = AB5500_IRQ(9, 0),
+ },
+ {
+ .name = "USBCharDetDone",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 1),
+ .end = AB5500_IRQ(9, 1),
+ },
+ {
+ .name = "DCIO_no_limit",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 2),
+ .end = AB5500_IRQ(9, 2),
+ },
+ {
+ .name = "USB_suspend",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 3),
+ .end = AB5500_IRQ(9, 3),
+ },
+ {
+ .name = "DCIOreverse_fwdcurrent",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 4),
+ .end = AB5500_IRQ(9, 4),
+ },
+ {
+ .name = "Vbus_Imeasmax_change",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(9, 5),
+ .end = AB5500_IRQ(9, 6),
+ },
+ {
+ .name = "OVV",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 5),
+ .end = AB5500_IRQ(14, 5),
+ },
+ {
+ .name = "USBcharging_NOTok",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 3),
+ .end = AB5500_IRQ(15, 3),
+ },
+ {
+ .name = "usb_adp_sensoroff",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 6),
+ .end = AB5500_IRQ(15, 6),
+ },
+ {
+ .name = "usb_adp_probeplug",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 7),
+ .end = AB5500_IRQ(15, 7),
+ },
+ {
+ .name = "usb_adp_sinkerror",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 0),
+ .end = AB5500_IRQ(16, 6),
+ },
+ {
+ .name = "usb_adp_sourceerror",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 1),
+ .end = AB5500_IRQ(16, 1),
+ },
+ {
+ .name = "usb_idgnd_r",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 2),
+ .end = AB5500_IRQ(16, 2),
+ },
+ {
+ .name = "usb_idgnd_f",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 3),
+ .end = AB5500_IRQ(16, 3),
+ },
+ {
+ .name = "usb_iddetR1",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 4),
+ .end = AB5500_IRQ(16, 5),
+ },
+ {
+ .name = "usb_iddetR2",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(16, 6),
+ .end = AB5500_IRQ(16, 7),
+ },
+ {
+ .name = "usb_iddetR3",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 0),
+ .end = AB5500_IRQ(17, 1),
+ },
+ {
+ .name = "usb_iddetR4",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 2),
+ .end = AB5500_IRQ(17, 3),
+ },
+ {
+ .name = "CharTempWindowOk",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(17, 7),
+ .end = AB5500_IRQ(18, 0),
+ },
+ {
+ .name = "USB_SprDetect",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 1),
+ .end = AB5500_IRQ(18, 1),
+ },
+ {
+ .name = "usb_adp_probe_unplug",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 2),
+ .end = AB5500_IRQ(18, 2),
+ },
+ {
+ .name = "VBUSChDrop",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 3),
+ .end = AB5500_IRQ(18, 4),
+ },
+ {
+ .name = "dcio_char_rec_done",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 5),
+ .end = AB5500_IRQ(18, 5),
+ },
+ {
+ .name = "Charging_stopped_by_temp",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(18, 6),
+ .end = AB5500_IRQ(18, 6),
+ },
+ {
+ .name = "CHGstate_11_SafeModeVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 1),
+ .end = AB5500_IRQ(21, 2),
+ },
+ {
+ .name = "CHGstate_12_comletedVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 2),
+ .end = AB5500_IRQ(21, 2),
+ },
+ {
+ .name = "CHGstate_13_completedVBUS",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 3),
+ .end = AB5500_IRQ(21, 3),
+ },
+ {
+ .name = "CHGstate_14_FullChgDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 4),
+ .end = AB5500_IRQ(21, 4),
+ },
+ {
+ .name = "CHGstate_15_SafeModeDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 5),
+ .end = AB5500_IRQ(21, 5),
+ },
+ {
+ .name = "CHGstate_16_OFFsuspendDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 6),
+ .end = AB5500_IRQ(21, 6),
+ },
+ {
+ .name = "CHGstate_17_completedDCIO",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(21, 7),
+ .end = AB5500_IRQ(21, 7),
+ },
+ },
+ },
+ [AB5500_DEVID_OTP] = {
+ .name = "ab5500-otp",
+ .id = AB5500_DEVID_OTP,
+ },
+ [AB5500_DEVID_VIDEO] = {
+ .name = "ab5500-video",
+ .id = AB5500_DEVID_VIDEO,
+ .num_resources = 1,
+ .resources = (struct resource[]) {
+ {
+ .name = "plugTVdet",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(22, 2),
+ .end = AB5500_IRQ(22, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_DBIECI] = {
+ .name = "ab5500-dbieci",
+ .id = AB5500_DEVID_DBIECI,
+ .num_resources = 10,
+ .resources = (struct resource[]) {
+ {
+ .name = "COLL",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 0),
+ .end = AB5500_IRQ(14, 0),
+ },
+ {
+ .name = "RESERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 1),
+ .end = AB5500_IRQ(14, 1),
+ },
+ {
+ .name = "FRAERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 2),
+ .end = AB5500_IRQ(14, 2),
+ },
+ {
+ .name = "COMERR",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 3),
+ .end = AB5500_IRQ(14, 3),
+ },
+ {
+ .name = "BSI_indicator",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 4),
+ .end = AB5500_IRQ(14, 4),
+ },
+ {
+ .name = "SPDSET",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 6),
+ .end = AB5500_IRQ(14, 6),
+ },
+ {
+ .name = "DSENT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(14, 7),
+ .end = AB5500_IRQ(14, 7),
+ },
+ {
+ .name = "DREC",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 0),
+ .end = AB5500_IRQ(15, 0),
+ },
+ {
+ .name = "ACCINT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 1),
+ .end = AB5500_IRQ(15, 1),
+ },
+ {
+ .name = "NOPINT",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(15, 2),
+ .end = AB5500_IRQ(15, 2),
+ },
+ },
+ },
+ [AB5500_DEVID_ONSWA] = {
+ .name = "ab5500-onswa",
+ .id = AB5500_DEVID_ONSWA,
+ .num_resources = 2,
+ .resources = (struct resource[]) {
+ {
+ .name = "ONSWAn_rising",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 3),
+ .end = AB5500_IRQ(1, 3),
+ },
+ {
+ .name = "ONSWAn_falling",
+ .flags = IORESOURCE_IRQ,
+ .start = AB5500_IRQ(1, 4),
+ .end = AB5500_IRQ(1, 4),
+ },
+ },
+ },
+};
+
+/*
+ * Functionality for getting/setting register values.
+ */
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
+ u8 bank, u8 reg,
+ u8 *value)
+{
+ int err;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
+
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ int err;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ while (numregs) {
+ /* The hardware limit for get page is 4 */
+ u8 curnum = min_t(u8, numregs, 4u);
+
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+ first_reg, regvals, curnum);
+ if (err)
+ goto out;
+
+ numregs -= curnum;
+ first_reg += curnum;
+ regvals += curnum;
+ }
+
+out:
+ mutex_unlock(&ab->access_mutex);
+ return err;
+}
+
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues)
+{
+ int err = 0;
+
+ if (bank >= AB5500_NUM_BANKS)
+ return -EINVAL;
+
+ if (bitmask) {
+ u8 buf;
+
+ err = mutex_lock_interruptible(&ab->access_mutex);
+ if (err)
+ return err;
+
+ if (bitmask == 0xFF) /* No need to read in this case. */
+ buf = bitvalues;
+ else { /* Read and modify the register value. */
+ err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
+ reg, &buf, 1);
+ if (err)
+ return err;
+
+ buf = ((~bitmask & buf) | (bitmask & bitvalues));
+ }
+ /* Write the new value. */
+ err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
+ &buf, 1);
+
+ mutex_unlock(&ab->access_mutex);
+ }
+ return err;
+}
+
+static int
+set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
+{
+ return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+ 0xff, value);
+}
+
+/*
+ * Read/write permission checking functions.
+ */
+static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
+{
+ u8 i;
+
+ if (devid < AB5500_NUM_DEVICES) {
+ for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
+ if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
+ return &ab5500_bank_ranges[devid].bank[i];
+ }
+ }
+ return NULL;
+}
+
+static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+ u8 i; /* range loop index */
+ const struct ab5500_i2c_ranges *bankref;
+
+ bankref = get_bankref(devid, bank);
+ if (bankref == NULL || last_reg < first_reg)
+ return false;
+
+ for (i = 0; i < bankref->nranges; i++) {
+ if (first_reg < bankref->range[i].first)
+ break;
+ if ((last_reg <= bankref->range[i].last) &&
+ (bankref->range[i].perm & AB5500_PERM_WR))
+ return true;
+ }
+ return false;
+}
+
+static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
+{
+ return page_write_allowed(devid, bank, reg, reg);
+}
+
+static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
+{
+ u8 i;
+ const struct ab5500_i2c_ranges *bankref;
+
+ bankref = get_bankref(devid, bank);
+ if (bankref == NULL || last_reg < first_reg)
+ return false;
+
+
+ /* Find the range (if it exists in the list) that includes first_reg. */
+ for (i = 0; i < bankref->nranges; i++) {
+ if (first_reg < bankref->range[i].first)
+ return false;
+ if (first_reg <= bankref->range[i].last)
+ break;
+ }
+ /* Make sure that the entire range up to and including last_reg is
+ * readable. This may span several of the ranges in the list.
+ */
+ while ((i < bankref->nranges) &&
+ (bankref->range[i].perm & AB5500_PERM_RD)) {
+ if (last_reg <= bankref->range[i].last)
+ return true;
+ if ((++i >= bankref->nranges) ||
+ (bankref->range[i].first !=
+ (bankref->range[i - 1].last + 1))) {
+ break;
+ }
+ }
+ return false;
+}
+
+static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
+{
+ return page_read_allowed(devid, bank, reg, reg);
+}
+
+
+/*
+ * The exported register access functionality.
+ */
+static int ab5500_get_chip_id(struct device *dev)
+{
+ struct ab5500 *ab = dev_get_drvdata(dev->parent);
+
+ return (int)ab->chip_id;
+}
+
+static int ab5500_mask_and_set_register_interruptible(struct device *dev,
+ u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !reg_write_allowed(pdev->id, bank, reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
+ bitmask, bitvalues);
+}
+
+static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 value)
+{
+ return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
+ value);
+}
+
+static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
+ u8 reg, u8 *value)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !reg_read_allowed(pdev->id, bank, reg))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return ab5500_get_register_interruptible_raw(ab, bank, reg, value);
+}
+
+static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank,
+ u8 first_reg, u8 *regvals, u8 numregs)
+{
+ struct ab5500 *ab;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if ((AB5500_NUM_BANKS <= bank) ||
+ !page_read_allowed(pdev->id, bank,
+ first_reg, (first_reg + numregs - 1)))
+ return -EINVAL;
+
+ ab = dev_get_drvdata(dev->parent);
+ return get_register_page_interruptible(ab, bank, first_reg, regvals,
+ numregs);
+}
+
+static int
+ab5500_event_registers_startup_state_get(struct device *dev, u8 *event)
+{
+ struct ab5500 *ab;
+
+ ab = dev_get_drvdata(dev->parent);
+ if (!ab->startup_events_read)
+ return -EAGAIN; /* Try again later */
+
+ memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG);
+ return 0;
+}
+
+static struct abx500_ops ab5500_ops = {
+ .get_chip_id = ab5500_get_chip_id,
+ .get_register = ab5500_get_register_interruptible,
+ .set_register = ab5500_set_register_interruptible,
+ .get_register_page = ab5500_get_register_page_interruptible,
+ .set_register_page = NULL,
+ .mask_and_set_register = ab5500_mask_and_set_register_interruptible,
+ .event_registers_startup_state_get =
+ ab5500_event_registers_startup_state_get,
+ .startup_irq_enabled = NULL,
+};
+
+/*
+ * ab5500_setup : Basic set-up, datastructure creation/destruction
+ * and I2C interface.This sets up a default config
+ * in the AB5500 chip so that it will work as expected.
+ * @ab : Pointer to ab5500 structure
+ * @settings : Pointer to struct abx500_init_settings
+ * @size : Size of init data
+ */
+static int __init ab5500_setup(struct ab5500 *ab,
+ struct abx500_init_settings *settings, unsigned int size)
+{
+ int err = 0;
+ int i;
+
+ for (i = 0; i < size; i++) {
+ err = ab5500_mask_and_set_register_interruptible_raw(ab,
+ settings[i].bank,
+ settings[i].reg,
+ 0xFF, settings[i].setting);
+ if (err)
+ goto exit_no_setup;
+
+ /* If event mask register update the event mask in ab5500 */
+ if ((settings[i].bank == AB5500_BANK_IT) &&
+ (AB5500_MASK_BASE <= settings[i].reg) &&
+ (settings[i].reg <= AB5500_MASK_END)) {
+ ab->mask[settings[i].reg - AB5500_MASK_BASE] =
+ settings[i].setting;
+ }
+ }
+exit_no_setup:
+ return err;
+}
+
+struct ab_family_id {
+ u8 id;
+ char *name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+ /* AB5500 */
+ {
+ .id = AB5500_1_0,
+ .name = "1.0"
+ },
+ {
+ .id = AB5500_1_1,
+ .name = "1.1"
+ },
+ /* Terminator */
+ {
+ .id = 0x00,
+ }
+};
+
+static int __init ab5500_probe(struct platform_device *pdev)
+{
+ struct ab5500 *ab;
+ struct ab5500_platform_data *ab5500_plf_data =
+ pdev->dev.platform_data;
+ int err;
+ int i;
+
+ ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL);
+ if (!ab) {
+ dev_err(&pdev->dev,
+ "could not allocate ab5500 device\n");
+ return -ENOMEM;
+ }
+
+ /* Initialize data structure */
+ mutex_init(&ab->access_mutex);
+ mutex_init(&ab->irq_lock);
+ ab->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, ab);
+
+ /* Read chip ID register */
+ err = ab5500_get_register_interruptible_raw(ab,
+ AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ AB5500_CHIP_ID, &ab->chip_id);
+ if (err) {
+ dev_err(&pdev->dev, "could not communicate with the analog "
+ "baseband chip\n");
+ goto exit_no_detect;
+ }
+
+ for (i = 0; ids[i].id != 0x0; i++) {
+ if (ids[i].id == ab->chip_id) {
+ snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
+ "AB5500 %s", ids[i].name);
+ break;
+ }
+ }
+ if (ids[i].id == 0x0) {
+ dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n",
+ ab->chip_id);
+ dev_err(&pdev->dev, "driver not started!\n");
+ goto exit_no_detect;
+ }
+
+ /* Clear and mask all interrupts */
+ for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) {
+ u8 latchreg = AB5500_IT_LATCH0_REG + i;
+ u8 maskreg = AB5500_IT_MASK0_REG + i;
+ u8 val;
+
+ ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT,
+ latchreg, &val);
+ set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff);
+ ab->mask[i] = ab->oldmask[i] = 0xff;
+ }
+
+ err = abx500_register_ops(&pdev->dev, &ab5500_ops);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_register ops error\n");
+ goto exit_no_detect;
+ }
+
+ /* Set up and register the platform devices. */
+ for (i = 0; i < AB5500_NUM_DEVICES; i++) {
+ ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i];
+ ab5500_devs[i].pdata_size =
+ sizeof(ab5500_plf_data->dev_data[i]);
+ }
+
+ err = mfd_add_devices(&pdev->dev, 0, ab5500_devs,
+ ARRAY_SIZE(ab5500_devs), NULL,
+ ab5500_plf_data->irq.base);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_mfd_add_device error\n");
+ goto exit_no_detect;
+ }
+
+ err = ab5500_setup(ab, ab5500_plf_data->init_settings,
+ ab5500_plf_data->init_settings_sz);
+ if (err) {
+ dev_err(&pdev->dev, "ab5500_setup error\n");
+ goto exit_no_detect;
+ }
+
+ ab5500_setup_debugfs(ab);
+
+ dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
+ return 0;
+
+exit_no_detect:
+ kfree(ab);
+ return err;
+}
+
+static int __exit ab5500_remove(struct platform_device *pdev)
+{
+ struct ab5500 *ab = platform_get_drvdata(pdev);
+
+ ab5500_remove_debugfs();
+ mfd_remove_devices(&pdev->dev);
+ kfree(ab);
+ return 0;
+}
+
+static struct platform_driver ab5500_driver = {
+ .driver = {
+ .name = "ab5500-core",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(ab5500_remove),
+};
+
+static int __init ab5500_core_init(void)
+{
+ return platform_driver_probe(&ab5500_driver, ab5500_probe);
+}
+
+static void __exit ab5500_core_exit(void)
+{
+ platform_driver_unregister(&ab5500_driver);
+}
+
+subsys_initcall(ab5500_core_init);
+module_exit(ab5500_core_exit);
+
+MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
+MODULE_DESCRIPTION("AB5500 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab5500-core.h b/drivers/mfd/ab5500-core.h
new file mode 100644
index 0000000..63b30b1
--- /dev/null
+++ b/drivers/mfd/ab5500-core.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Shared definitions and data structures for the AB5500 MFD driver
+ */
+
+/* Read/write operation values. */
+#define AB5500_PERM_RD (0x01)
+#define AB5500_PERM_WR (0x02)
+
+/* Read/write permissions. */
+#define AB5500_PERM_RO (AB5500_PERM_RD)
+#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
+
+#define AB5500_MASK_BASE (0x60)
+#define AB5500_MASK_END (0x79)
+#define AB5500_CHIP_ID (0x20)
+
+/**
+ * struct ab5500_reg_range
+ * @first: the first address of the range
+ * @last: the last address of the range
+ * @perm: access permissions for the range
+ */
+struct ab5500_reg_range {
+ u8 first;
+ u8 last;
+ u8 perm;
+};
+
+/**
+ * struct ab5500_i2c_ranges
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_ranges {
+ u8 nranges;
+ u8 bankid;
+ const struct ab5500_reg_range *range;
+};
+
+/**
+ * struct ab5500_i2c_banks
+ * @count: the number of ranges in the list
+ * @range: the list of register ranges
+ */
+struct ab5500_i2c_banks {
+ u8 nbanks;
+ const struct ab5500_i2c_ranges *bank;
+};
+
+/**
+ * struct ab5500_bank
+ * @slave_addr: I2C slave_addr found in AB5500 specification
+ * @name: Documentation name of the bank. For reference
+ */
+struct ab5500_bank {
+ u8 slave_addr;
+ const char *name;
+};
+
+static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
+ [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+ AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
+ [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+ AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
+ [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
+ [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
+ [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
+ [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
+ [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
+ [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
+ [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
+ [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
+ [AB5500_BANK_FG_BATTCOM_ACC] = {
+ AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
+ [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
+ [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
+ [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
+ [AB5500_BANK_AUDIO_HEADSETUSB] = {
+ AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
+};
+
+int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
+ u8 *value);
+int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
+ u8 reg, u8 bitmask, u8 bitvalues);
diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c
new file mode 100644
index 0000000..6be1fe6
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.c
@@ -0,0 +1,806 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs support for the AB5500 MFD driver
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/uaccess.h>
+
+#include "ab5500-core.h"
+#include "ab5500-debugfs.h"
+
+static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = {
+ [AB5500_BANK_LED] = {
+ .bankid = AB5500_BANK_LED,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_ADC] = {
+ .bankid = AB5500_BANK_ADC,
+ .nranges = 6,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x1F,
+ .last = 0x22,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x23,
+ .last = 0x24,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x26,
+ .last = 0x2D,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x37,
+ .last = 0x57,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x58,
+ .last = 0x58,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_RTC] = {
+ .bankid = AB5500_BANK_RTC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x04,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x06,
+ .last = 0x0C,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_STARTUP] = {
+ .bankid = AB5500_BANK_STARTUP,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1F,
+ .last = 0x1F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x2E,
+ .last = 0x2E,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x2F,
+ .last = 0x30,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x51,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x61,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x66,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8C,
+ .last = 0x96,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xAA,
+ .last = 0xB4,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xB7,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xCA,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xD3,
+ .last = 0xE0,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_DBI_ECI] = {
+ .bankid = AB5500_BANK_DBI_ECI,
+ .nranges = 3,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x07,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x10,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x13,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_CHG] = {
+ .bankid = AB5500_BANK_CHG,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x11,
+ .last = 0x11,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x12,
+ .last = 0x1B,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_FG_BATTCOM_ACC] = {
+ .bankid = AB5500_BANK_FG_BATTCOM_ACC,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x0B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0C,
+ .last = 0x10,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_USB] = {
+ .bankid = AB5500_BANK_USB,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x83,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x87,
+ .last = 0x8A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x8B,
+ .last = 0x8B,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x91,
+ .last = 0x92,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x93,
+ .last = 0x93,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x94,
+ .last = 0x94,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xA8,
+ .last = 0xB0,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB2,
+ .last = 0xB2,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xB4,
+ .last = 0xBC,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xBF,
+ .last = 0xBF,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0xC1,
+ .last = 0xC5,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_IT] = {
+ .bankid = AB5500_BANK_IT,
+ .nranges = 4,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x02,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x20,
+ .last = 0x36,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x40,
+ .last = 0x56,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x60,
+ .last = 0x76,
+ .perm = AB5500_PERM_RO,
+ },
+ },
+ },
+ [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
+ .bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST,
+ .nranges = 7,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x02,
+ .last = 0x02,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x12,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x30,
+ .last = 0x34,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x40,
+ .last = 0x44,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x54,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x64,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x70,
+ .last = 0x74,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
+ .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
+ .nranges = 13,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x01,
+ .last = 0x01,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x02,
+ .last = 0x02,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0D,
+ .last = 0x0F,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1C,
+ .last = 0x1C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1E,
+ .last = 0x1E,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x20,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x25,
+ .last = 0x25,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x28,
+ .last = 0x2A,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x30,
+ .last = 0x33,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x40,
+ .last = 0x43,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x50,
+ .last = 0x53,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x60,
+ .last = 0x63,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x70,
+ .last = 0x73,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VIBRA] = {
+ .bankid = AB5500_BANK_VIBRA,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x10,
+ .last = 0x13,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xFE,
+ .last = 0xFE,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_AUDIO_HEADSETUSB] = {
+ .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
+ .nranges = 2,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x48,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0xEB,
+ .last = 0xFB,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_SIM_USBSIM] = {
+ .bankid = AB5500_BANK_SIM_USBSIM,
+ .nranges = 1,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x13,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+ [AB5500_BANK_VDENC] = {
+ .bankid = AB5500_BANK_VDENC,
+ .nranges = 12,
+ .range = (struct ab5500_reg_range[]) {
+ {
+ .first = 0x00,
+ .last = 0x08,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x09,
+ .last = 0x09,
+ .perm = AB5500_PERM_RO,
+ },
+ {
+ .first = 0x0A,
+ .last = 0x12,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x15,
+ .last = 0x19,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x1B,
+ .last = 0x21,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x27,
+ .last = 0x2C,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x41,
+ .last = 0x41,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x45,
+ .last = 0x5B,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x5D,
+ .last = 0x5D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x69,
+ .last = 0x69,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x6C,
+ .last = 0x6D,
+ .perm = AB5500_PERM_RW,
+ },
+ {
+ .first = 0x80,
+ .last = 0x81,
+ .perm = AB5500_PERM_RW,
+ },
+ },
+ },
+};
+
+static int ab5500_registers_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+ unsigned int i;
+ u8 bank = (u8)ab->debug_bank;
+
+ seq_printf(s, "ab5500 register values:\n");
+ for (bank = 0; bank < AB5500_NUM_BANKS; bank++) {
+ seq_printf(s, " bank %u, %s (0x%x):\n", bank,
+ bankinfo[bank].name,
+ bankinfo[bank].slave_addr);
+ for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) {
+ u8 reg;
+ int err;
+
+ for (reg = ab5500_reg_ranges[bank].range[i].first;
+ reg <= ab5500_reg_ranges[bank].range[i].last;
+ reg++) {
+ u8 value;
+
+ err = ab5500_get_register_interruptible_raw(ab,
+ bank, reg,
+ &value);
+ if (err < 0) {
+ dev_err(ab->dev, "get_reg failed %d"
+ "bank 0x%x reg 0x%x\n",
+ err, bank, reg);
+ return err;
+ }
+
+ err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n",
+ bank, reg, value);
+ if (err < 0) {
+ dev_err(ab->dev,
+ "seq_printf overflow\n");
+ /*
+ * Error is not returned here since
+ * the output is wanted in any case
+ */
+ return 0;
+ }
+ }
+ }
+ }
+ return 0;
+}
+
+static int ab5500_registers_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab5500_registers_fops = {
+ .open = ab5500_registers_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ab5500_bank_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+
+ seq_printf(s, "%d\n", ab->debug_bank);
+ return 0;
+}
+
+static int ab5500_bank_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_bank_print, inode->i_private);
+}
+
+static ssize_t ab5500_bank_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_bank;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_bank);
+ if (err)
+ return -EINVAL;
+
+ if (user_bank >= AB5500_NUM_BANKS) {
+ dev_err(ab->dev,
+ "debugfs error input > number of banks\n");
+ return -EINVAL;
+ }
+
+ ab->debug_bank = user_bank;
+
+ return buf_size;
+}
+
+static int ab5500_address_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+
+ seq_printf(s, "0x%02X\n", ab->debug_address);
+ return 0;
+}
+
+static int ab5500_address_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_address_print, inode->i_private);
+}
+
+static ssize_t ab5500_address_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_address;
+ int err;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf) - 1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_address);
+ if (err)
+ return -EINVAL;
+ if (user_address > 0xff) {
+ dev_err(ab->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ ab->debug_address = user_address;
+ return buf_size;
+}
+
+static int ab5500_val_print(struct seq_file *s, void *p)
+{
+ struct ab5500 *ab = s->private;
+ int err;
+ u8 regvalue;
+
+ err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, ®value);
+ if (err) {
+ dev_err(ab->dev, "get_reg failed %d, bank 0x%x"
+ ", reg 0x%x\n", err, ab->debug_bank,
+ ab->debug_address);
+ return -EINVAL;
+ }
+ seq_printf(s, "0x%02X\n", regvalue);
+
+ return 0;
+}
+
+static int ab5500_val_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ab5500_val_print, inode->i_private);
+}
+
+static ssize_t ab5500_val_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
+ char buf[32];
+ int buf_size;
+ unsigned long user_val;
+ int err;
+ u8 regvalue;
+
+ /* Get userspace string and assure termination */
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ err = strict_strtoul(buf, 0, &user_val);
+ if (err)
+ return -EINVAL;
+ if (user_val > 0xff) {
+ dev_err(ab->dev,
+ "debugfs error input > 0xff\n");
+ return -EINVAL;
+ }
+ err = ab5500_mask_and_set_register_interruptible_raw(
+ ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, 0xFF, (u8)user_val);
+ if (err)
+ return -EINVAL;
+
+ ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
+ (u8)ab->debug_address, ®value);
+ if (err)
+ return -EINVAL;
+
+ return buf_size;
+}
+
+static const struct file_operations ab5500_bank_fops = {
+ .open = ab5500_bank_open,
+ .write = ab5500_bank_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_address_fops = {
+ .open = ab5500_address_open,
+ .write = ab5500_address_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static const struct file_operations ab5500_val_fops = {
+ .open = ab5500_val_open,
+ .write = ab5500_val_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static struct dentry *ab5500_dir;
+static struct dentry *ab5500_reg_file;
+static struct dentry *ab5500_bank_file;
+static struct dentry *ab5500_address_file;
+static struct dentry *ab5500_val_file;
+
+void __init ab5500_setup_debugfs(struct ab5500 *ab)
+{
+ ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP;
+ ab->debug_address = AB5500_CHIP_ID;
+
+ ab5500_dir = debugfs_create_dir("ab5500", NULL);
+ if (!ab5500_dir)
+ goto exit_no_debugfs;
+
+ ab5500_reg_file = debugfs_create_file("all-bank-registers",
+ S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops);
+ if (!ab5500_reg_file)
+ goto exit_destroy_dir;
+
+ ab5500_bank_file = debugfs_create_file("register-bank",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops);
+ if (!ab5500_bank_file)
+ goto exit_destroy_reg;
+
+ ab5500_address_file = debugfs_create_file("register-address",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops);
+ if (!ab5500_address_file)
+ goto exit_destroy_bank;
+
+ ab5500_val_file = debugfs_create_file("register-value",
+ (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops);
+ if (!ab5500_val_file)
+ goto exit_destroy_address;
+
+ return;
+
+exit_destroy_address:
+ debugfs_remove(ab5500_address_file);
+exit_destroy_bank:
+ debugfs_remove(ab5500_bank_file);
+exit_destroy_reg:
+ debugfs_remove(ab5500_reg_file);
+exit_destroy_dir:
+ debugfs_remove(ab5500_dir);
+exit_no_debugfs:
+ dev_err(ab->dev, "failed to create debugfs entries.\n");
+ return;
+}
+
+void __exit ab5500_remove_debugfs(void)
+{
+ debugfs_remove(ab5500_val_file);
+ debugfs_remove(ab5500_address_file);
+ debugfs_remove(ab5500_bank_file);
+ debugfs_remove(ab5500_reg_file);
+ debugfs_remove(ab5500_dir);
+}
diff --git a/drivers/mfd/ab5500-debugfs.h b/drivers/mfd/ab5500-debugfs.h
new file mode 100644
index 0000000..7330a9b
--- /dev/null
+++ b/drivers/mfd/ab5500-debugfs.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2011 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Debugfs interface to the AB5500 core driver
+ */
+
+#ifdef CONFIG_DEBUG_FS
+
+void ab5500_setup_debugfs(struct ab5500 *ab);
+void ab5500_remove_debugfs(void);
+
+#else /* !CONFIG_DEBUG_FS */
+
+static inline void ab5500_setup_debugfs(struct ab5500 *ab)
+{
+}
+
+static inline void ab5500_remove_debugfs(void)
+{
+}
+
+#endif
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 387705e..1e91738 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -92,6 +92,8 @@
#define AB8500_REV_REG 0x80
#define AB8500_SWITCH_OFF_STATUS 0x00
+#define AB8500_TURN_ON_STATUS 0x00
+
/*
* Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
* numbers are indexed into this array with (num / 8).
@@ -293,6 +295,7 @@
.irq_bus_lock = ab8500_irq_lock,
.irq_bus_sync_unlock = ab8500_irq_sync_unlock,
.irq_mask = ab8500_irq_mask,
+ .irq_disable = ab8500_irq_mask,
.irq_unmask = ab8500_irq_unmask,
};
@@ -811,12 +814,40 @@
return sprintf(buf, "%#x\n", value);
}
+/*
+ * ab8500 has turned on due to (TURN_ON_STATUS):
+ * 0x01 PORnVbat
+ * 0x02 PonKey1dbF
+ * 0x04 PonKey2dbF
+ * 0x08 RTCAlarm
+ * 0x10 MainChDet
+ * 0x20 VbusDet
+ * 0x40 UsbIDDetect
+ * 0x80 Reserved
+ */
+static ssize_t show_turn_on_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ u8 value;
+ struct ab8500 *ab8500;
+
+ ab8500 = dev_get_drvdata(dev);
+ ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_TURN_ON_STATUS, &value);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%#x\n", value);
+}
+
static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
+static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
static struct attribute *ab8500_sysfs_entries[] = {
&dev_attr_chip_id.attr,
&dev_attr_switch_off_status.attr,
+ &dev_attr_turn_on_status.attr,
NULL,
};
@@ -843,11 +874,11 @@
return ret;
switch (value) {
- case AB8500_CUTEARLY:
case AB8500_CUT1P0:
case AB8500_CUT1P1:
case AB8500_CUT2P0:
case AB8500_CUT3P0:
+ case AB8500_CUT3P3:
dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
break;
default:
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index f16afb2..e985d17 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -143,12 +143,15 @@
}
EXPORT_SYMBOL(ab8500_gpadc_get);
-static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 input,
+/**
+ * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
+ */
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
int ad_value)
{
int res;
- switch (input) {
+ switch (channel) {
case MAIN_CHARGER_V:
/* For some reason we don't have calibrated data */
if (!gpadc->cal_data[ADC_INPUT_VMAIN].gain) {
@@ -232,18 +235,46 @@
}
return res;
}
+EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
/**
* ab8500_gpadc_convert() - gpadc conversion
- * @input: analog input to be converted to digital data
+ * @channel: analog channel to be converted to digital data
*
* This function converts the selected analog i/p to digital
* data.
*/
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+{
+ int ad_value;
+ int voltage;
+
+ ad_value = ab8500_gpadc_read_raw(gpadc, channel);
+ if (ad_value < 0) {
+ dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+ return ad_value;
+ }
+
+ voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
+
+ if (voltage < 0)
+ dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+ " %d AD: 0x%x\n", channel, ad_value);
+
+ return voltage;
+}
+EXPORT_SYMBOL(ab8500_gpadc_convert);
+
+/**
+ * ab8500_gpadc_read_raw() - gpadc read
+ * @channel: analog channel to be read
+ *
+ * This function obtains the raw ADC value, this then needs
+ * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ */
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
{
int ret;
- u16 data = 0;
int looplimit = 0;
u8 val, low_data, high_data;
@@ -278,9 +309,9 @@
goto out;
}
- /* Select the input source and set average samples to 16 */
+ /* Select the channel source and set average samples to 16 */
ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
- AB8500_GPADC_CTRL2_REG, (input | SW_AVG_16));
+ AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
if (ret < 0) {
dev_err(gpadc->dev,
"gpadc_conversion: set avg samples failed\n");
@@ -292,7 +323,7 @@
* charging current sense if it needed, ABB 3.0 needs some special
* treatment too.
*/
- switch (input) {
+ switch (channel) {
case MAIN_CHARGER_C:
case USB_CHARGER_C:
ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
@@ -359,7 +390,6 @@
goto out;
}
- data = (high_data << 8) | low_data;
/* Disable GPADC */
ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
AB8500_GPADC_CTRL1_REG, DIS_GPADC);
@@ -370,8 +400,8 @@
/* Disable VTVout LDO this is required for GPADC */
regulator_disable(gpadc->regu);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
- ret = ab8500_gpadc_ad_to_voltage(gpadc, input, data);
- return ret;
+
+ return (high_data << 8) | low_data;
out:
/*
@@ -385,10 +415,10 @@
regulator_disable(gpadc->regu);
mutex_unlock(&gpadc->ab8500_gpadc_lock);
dev_err(gpadc->dev,
- "gpadc_conversion: Failed to AD convert channel %d\n", input);
+ "gpadc_conversion: Failed to AD convert channel %d\n", channel);
return ret;
}
-EXPORT_SYMBOL(ab8500_gpadc_convert);
+EXPORT_SYMBOL(ab8500_gpadc_read_raw);
/**
* ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index c71ae09..3bd85bd 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -584,7 +584,7 @@
return gpiochip_remove(&asic->gpio);
}
-static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
+static void asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
{
unsigned long flags;
u32 cdex;
@@ -596,8 +596,6 @@
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
}
spin_unlock_irqrestore(&asic->lock, flags);
-
- return 0;
}
static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
@@ -779,6 +777,8 @@
.name = "tmio-mmc",
.enable = asic3_mmc_enable,
.disable = asic3_mmc_disable,
+ .suspend = asic3_mmc_disable,
+ .resume = asic3_mmc_enable,
.platform_data = &asic3_mmc_data,
.pdata_size = sizeof(asic3_mmc_data),
.num_resources = ARRAY_SIZE(asic3_mmc_resources),
@@ -811,24 +811,43 @@
return 0;
}
+static int asic3_leds_suspend(struct platform_device *pdev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+ while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
+ msleep(1);
+
+ asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
+
+ return 0;
+}
+
static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = {
[0] = {
.name = "leds-asic3",
.id = 0,
.enable = asic3_leds_enable,
.disable = asic3_leds_disable,
+ .suspend = asic3_leds_suspend,
+ .resume = asic3_leds_enable,
},
[1] = {
.name = "leds-asic3",
.id = 1,
.enable = asic3_leds_enable,
.disable = asic3_leds_disable,
+ .suspend = asic3_leds_suspend,
+ .resume = asic3_leds_enable,
},
[2] = {
.name = "leds-asic3",
.id = 2,
.enable = asic3_leds_enable,
.disable = asic3_leds_disable,
+ .suspend = asic3_leds_suspend,
+ .resume = asic3_leds_enable,
},
};
@@ -949,6 +968,7 @@
goto out_unmap;
}
+ asic->gpio.label = "asic3";
asic->gpio.base = pdata->gpio_base;
asic->gpio.ngpio = ASIC3_NUM_GPIOS;
asic->gpio.get = asic3_gpio_get;
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 2fadbae..1b79c37 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -523,7 +523,7 @@
chip->ops->read_events(chip, &tmp);
ret = request_irq(client->irq, da903x_irq_handler,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_FALLING,
"da903x", chip);
if (ret) {
dev_err(&client->dev, "failed to request irq %d\n",
diff --git a/drivers/mfd/db5500-prcmu-regs.h b/drivers/mfd/db5500-prcmu-regs.h
deleted file mode 100644
index 9a8e9e4..0000000
--- a/drivers/mfd/db5500-prcmu-regs.h
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-
-#ifndef __MACH_PRCMU_REGS_H
-#define __MACH_PRCMU_REGS_H
-
-#include <mach/hardware.h>
-
-#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118)
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f
-#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xf
-
-#define PRCM_PLLARM_LOCKP (_PRCMU_BASE + 0x0a8)
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
-
-#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1
-
-#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON 0x100
-
-#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0)
-#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308)
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130)
-#define PRCM_IOCR (_PRCMU_BASE + 0x310)
-#define PRCM_IOCR_IOFORCE 0x1
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104)
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328)
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1
-
-#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334)
-#define ARM_WAKEUP_MODEM 0x1
-
-#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174)
-
-#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018)
-
-/* System reset register */
-#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504)
-#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
-#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044)
-#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064)
-#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058)
-#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c)
-#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C)
-#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
-#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8)
-#define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304)
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254)
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324)
-#define PRCM_GPIOCR (_PRCMU_BASE + 0x138)
-#define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800
-#define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1
-
-
-#endif /* __MACH_PRCMU__REGS_H */
diff --git a/drivers/mfd/db5500-prcmu.c b/drivers/mfd/db5500-prcmu.c
index 9dbb3ca..bb115b2 100644
--- a/drivers/mfd/db5500-prcmu.c
+++ b/drivers/mfd/db5500-prcmu.c
@@ -20,11 +20,11 @@
#include <linux/jiffies.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
-#include <linux/mfd/db5500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/db5500-regs.h>
-#include "db5500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
#define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
@@ -109,15 +109,18 @@
#define PRCMU_DSI_CLOCK_SETTING 0x00000128
/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135
-#define PRCMU_PLLDSI_FREQ_SETTING 0x0004013C
+#define PRCMU_PLLDSI_FREQ_SETTING 0x00020121
#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002
-#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000101
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000201
#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101
#define PRCMU_ENABLE_PLLDSI 0x00000001
#define PRCMU_DISABLE_PLLDSI 0x00000000
#define PRCMU_DSI_RESET_SW 0x00000003
+#define PRCMU_RESOUTN0_PIN 0x00000001
+#define PRCMU_RESOUTN1_PIN 0x00000002
+#define PRCMU_RESOUTN2_PIN 0x00000004
#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
@@ -315,31 +318,31 @@
r = false;
break;
}
- writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
return r;
}
static bool read_mailbox_1(void)
{
- writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_2(void)
{
- writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_3(void)
{
- writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_4(void)
{
- writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
return false;
}
@@ -360,19 +363,19 @@
print_unknown_header_warning(5, header);
break;
}
- writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_6(void)
{
- writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_7(void)
{
- writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
+ writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
return false;
}
@@ -434,7 +437,7 @@
return -ENODEV;
/* Clean up the mailbox interrupts after pre-kernel code. */
- writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLEAR);
+ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
prcmu_irq_thread_fn, 0, "prcmu", NULL);
diff --git a/drivers/mfd/db8500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
deleted file mode 100644
index 3bbf04d..0000000
--- a/drivers/mfd/db8500-prcmu-regs.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit registers
- */
-#ifndef __DB8500_PRCMU_REGS_H
-#define __DB8500_PRCMU_REGS_H
-
-#include <linux/bitops.h>
-#include <mach/hardware.h>
-
-#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
-
-#define PRCM_ARM_PLLDIVPS 0x118
-#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE BITS(0, 5)
-#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xF
-
-#define PRCM_PLLARM_LOCKP 0x0A8
-#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
-
-#define PRCM_ARM_CHGCLKREQ 0x114
-#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
-
-#define PRCM_PLLARM_ENABLE 0x98
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE BIT(0)
-#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON BIT(8)
-
-#define PRCM_ARMCLKFIX_MGT 0x0
-#define PRCM_A9_RESETN_CLR 0x1f4
-#define PRCM_A9_RESETN_SET 0x1f0
-#define PRCM_ARM_LS_CLAMP 0x30C
-#define PRCM_SRAM_A9 0x308
-
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY 0x130
-#define PRCM_IOCR 0x310
-#define PRCM_IOCR_IOFORCE BIT(0)
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL 0x0FC
-#define PRCM_MBOX_CPU_SET 0x100
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ 0x328
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
-
-#define PRCM_A9_MASK_ACK 0x32C
-#define PRCM_ARMITMSK31TO0 0x11C
-#define PRCM_ARMITMSK63TO32 0x120
-#define PRCM_ARMITMSK95TO64 0x124
-#define PRCM_ARMITMSK127TO96 0x128
-#define PRCM_POWER_STATE_VAL 0x25C
-#define PRCM_ARMITVAL31TO0 0x260
-#define PRCM_ARMITVAL63TO32 0x264
-#define PRCM_ARMITVAL95TO64 0x268
-#define PRCM_ARMITVAL127TO96 0x26C
-
-#define PRCM_HOSTACCESS_REQ 0x334
-#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
-
-#define PRCM_ARM_IT1_CLR 0x48C
-#define PRCM_ARM_IT1_VAL 0x494
-
-#define PRCM_ITSTATUS0 0x148
-#define PRCM_ITSTATUS1 0x150
-#define PRCM_ITSTATUS2 0x158
-#define PRCM_ITSTATUS3 0x160
-#define PRCM_ITSTATUS4 0x168
-#define PRCM_ITSTATUS5 0x484
-#define PRCM_ITCLEAR5 0x488
-#define PRCM_ARMIT_MASKXP70_IT 0x1018
-
-/* System reset register */
-#define PRCM_APE_SOFTRST 0x228
-
-/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET 0x420
-#define PRCM_MMIP_LS_CLAMP_CLR 0x424
-
-/* PRCMU HW semaphore */
-#define PRCM_SEM 0x400
-#define PRCM_SEM_PRCM_SEM BIT(0)
-
-/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLDSI_FREQ 0x500
-#define PRCM_PLLDSI_ENABLE 0x504
-#define PRCM_PLLDSI_LOCKP 0x508
-#define PRCM_DSI_PLLOUT_SEL 0x530
-#define PRCM_DSITVCLK_DIV 0x52C
-#define PRCM_APE_RESETN_SET 0x1E4
-#define PRCM_APE_RESETN_CLR 0x1E8
-
-#define PRCM_TCR 0x1C8
-#define PRCM_TCR_TENSEL_MASK BITS(0, 7)
-#define PRCM_TCR_STOP_TIMERS BIT(16)
-#define PRCM_TCR_DOZE_MODE BIT(17)
-
-#define PRCM_CLKOCR 0x1CC
-#define PRCM_CLKOCR_CLKODIV0_SHIFT 0
-#define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5)
-#define PRCM_CLKOCR_CLKOSEL0_SHIFT 6
-#define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8)
-#define PRCM_CLKOCR_CLKODIV1_SHIFT 16
-#define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21)
-#define PRCM_CLKOCR_CLKOSEL1_SHIFT 22
-#define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24)
-#define PRCM_CLKOCR_CLK1TYPE BIT(28)
-
-#define PRCM_SGACLK_MGT 0x014
-#define PRCM_UARTCLK_MGT 0x018
-#define PRCM_MSP02CLK_MGT 0x01C
-#define PRCM_MSP1CLK_MGT 0x288
-#define PRCM_I2CCLK_MGT 0x020
-#define PRCM_SDMMCCLK_MGT 0x024
-#define PRCM_SLIMCLK_MGT 0x028
-#define PRCM_PER1CLK_MGT 0x02C
-#define PRCM_PER2CLK_MGT 0x030
-#define PRCM_PER3CLK_MGT 0x034
-#define PRCM_PER5CLK_MGT 0x038
-#define PRCM_PER6CLK_MGT 0x03C
-#define PRCM_PER7CLK_MGT 0x040
-#define PRCM_LCDCLK_MGT 0x044
-#define PRCM_BMLCLK_MGT 0x04C
-#define PRCM_HSITXCLK_MGT 0x050
-#define PRCM_HSIRXCLK_MGT 0x054
-#define PRCM_HDMICLK_MGT 0x058
-#define PRCM_APEATCLK_MGT 0x05C
-#define PRCM_APETRACECLK_MGT 0x060
-#define PRCM_MCDECLK_MGT 0x064
-#define PRCM_IPI2CCLK_MGT 0x068
-#define PRCM_DSIALTCLK_MGT 0x06C
-#define PRCM_DMACLK_MGT 0x074
-#define PRCM_B2R2CLK_MGT 0x078
-#define PRCM_TVCLK_MGT 0x07C
-#define PRCM_UNIPROCLK_MGT 0x278
-#define PRCM_SSPCLK_MGT 0x280
-#define PRCM_RNGCLK_MGT 0x284
-#define PRCM_UICCCLK_MGT 0x27C
-
-#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4)
-#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7)
-#define PRCM_CLK_MGT_CLKEN BIT(8)
-
-/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET 0x410
-#define PRCM_SRAM_LS_SLEEP 0x304
-
-/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET 0x254
-
-/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET 0x324
-#define PRCM_GPIOCR 0x138
-
-/* GPIOCR register */
-#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
-
-#define PRCM_DDR_SUBSYS_APE_MINBW 0x438
-
-#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 02a15d7..a25ab9c 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -27,14 +27,14 @@
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/mfd/core.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <linux/regulator/db8500-prcmu.h>
#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/db8500-regs.h>
#include <mach/id.h>
-#include "db8500-prcmu-regs.h"
+#include "dbx500-prcmu-regs.h"
/* Offset for the firmware version within the TCPM */
#define PRCMU_FW_VERSION_OFFSET 0xA4
@@ -131,12 +131,14 @@
#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
#define MB1H_RELEASE_USB_WAKEUP 0x5
+#define MB1H_PLL_ON_OFF 0x6
/* Mailbox 1 Requests */
#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
-#define PRCM_REQ_MB1_APE_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x4)
-#define PRCM_REQ_MB1_ARM_OPP_100_RESTORE (PRCM_REQ_MB1 + 0x8)
+#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC1_OFF 0x4
+#define PLL_SOC1_ON 0x8
/* Mailbox 1 ACKs */
#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
@@ -184,6 +186,11 @@
#define MB4H_HOTDOG 0x12
#define MB4H_HOTMON 0x13
#define MB4H_HOT_PERIOD 0x14
+#define MB4H_A9WDOG_CONF 0x16
+#define MB4H_A9WDOG_EN 0x17
+#define MB4H_A9WDOG_DIS 0x18
+#define MB4H_A9WDOG_LOAD 0x19
+#define MB4H_A9WDOG_KICK 0x20
/* Mailbox 4 Requests */
#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
@@ -196,6 +203,13 @@
#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
#define HOTMON_CONFIG_LOW BIT(0)
#define HOTMON_CONFIG_HIGH BIT(1)
+#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3)
+#define A9WDOG_AUTO_OFF_EN BIT(7)
+#define A9WDOG_AUTO_OFF_DIS 0
+#define A9WDOG_ID_MASK 0xf
/* Mailbox 5 Requests */
#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
@@ -412,7 +426,7 @@
static DEFINE_SPINLOCK(clk_mgt_lock);
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT), 0 }
+#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
CLK_MGT_ENTRY(SGACLK),
CLK_MGT_ENTRY(UARTCLK),
@@ -445,6 +459,35 @@
CLK_MGT_ENTRY(UICCCLK),
};
+static struct regulator *hwacc_regulator[NUM_HW_ACC];
+static struct regulator *hwacc_ret_regulator[NUM_HW_ACC];
+
+static bool hwacc_enabled[NUM_HW_ACC];
+static bool hwacc_ret_enabled[NUM_HW_ACC];
+
+static const char *hwacc_regulator_name[NUM_HW_ACC] = {
+ [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp",
+ [HW_ACC_SVAPIPE] = "hwacc-sva-pipe",
+ [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp",
+ [HW_ACC_SIAPIPE] = "hwacc-sia-pipe",
+ [HW_ACC_SGA] = "hwacc-sga",
+ [HW_ACC_B2R2] = "hwacc-b2r2",
+ [HW_ACC_MCDE] = "hwacc-mcde",
+ [HW_ACC_ESRAM1] = "hwacc-esram1",
+ [HW_ACC_ESRAM2] = "hwacc-esram2",
+ [HW_ACC_ESRAM3] = "hwacc-esram3",
+ [HW_ACC_ESRAM4] = "hwacc-esram4",
+};
+
+static const char *hwacc_ret_regulator_name[NUM_HW_ACC] = {
+ [HW_ACC_SVAMMDSP] = "hwacc-sva-mmdsp-ret",
+ [HW_ACC_SIAMMDSP] = "hwacc-sia-mmdsp-ret",
+ [HW_ACC_ESRAM1] = "hwacc-esram1-ret",
+ [HW_ACC_ESRAM2] = "hwacc-esram2-ret",
+ [HW_ACC_ESRAM3] = "hwacc-esram3-ret",
+ [HW_ACC_ESRAM4] = "hwacc-esram4-ret",
+};
+
/*
* Used by MCDE to setup all necessary PRCMU registers
*/
@@ -493,55 +536,51 @@
} prcmu_version;
-int prcmu_enable_dsipll(void)
+int db8500_prcmu_enable_dsipll(void)
{
int i;
unsigned int plldsifreq;
/* Clear DSIPLL_RESETN */
- writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_CLR));
+ writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
/* Unclamp DSIPLL in/out */
- writel(PRCMU_UNCLAMP_DSIPLL, (_PRCMU_BASE + PRCM_MMIP_LS_CLAMP_CLR));
+ writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
if (prcmu_is_u8400())
plldsifreq = PRCMU_PLLDSI_FREQ_SETTING_U8400;
else
plldsifreq = PRCMU_PLLDSI_FREQ_SETTING;
/* Set DSI PLL FREQ */
- writel(plldsifreq, (_PRCMU_BASE + PRCM_PLLDSI_FREQ));
- writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
- (_PRCMU_BASE + PRCM_DSI_PLLOUT_SEL));
+ writel(plldsifreq, PRCM_PLLDSI_FREQ);
+ writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
/* Enable Escape clocks */
- writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV,
- (_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+ writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
/* Start DSI PLL */
- writel(PRCMU_ENABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+ writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
/* Reset DSI PLL */
- writel(PRCMU_DSI_RESET_SW, (_PRCMU_BASE + PRCM_DSI_SW_RESET));
+ writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
for (i = 0; i < 10; i++) {
- if ((readl(_PRCMU_BASE + PRCM_PLLDSI_LOCKP) &
- PRCMU_PLLDSI_LOCKP_LOCKED)
+ if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
== PRCMU_PLLDSI_LOCKP_LOCKED)
break;
udelay(100);
}
/* Set DSIPLL_RESETN */
- writel(PRCMU_RESET_DSIPLL, (_PRCMU_BASE + PRCM_APE_RESETN_SET));
+ writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
return 0;
}
-int prcmu_disable_dsipll(void)
+int db8500_prcmu_disable_dsipll(void)
{
/* Disable dsi pll */
- writel(PRCMU_DISABLE_PLLDSI, (_PRCMU_BASE + PRCM_PLLDSI_ENABLE));
+ writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
/* Disable escapeclock */
- writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV,
- (_PRCMU_BASE + PRCM_DSITVCLK_DIV));
+ writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
return 0;
}
-int prcmu_set_display_clocks(void)
+int db8500_prcmu_set_display_clocks(void)
{
unsigned long flags;
unsigned int dsiclk;
@@ -554,15 +593,15 @@
spin_lock_irqsave(&clk_mgt_lock, flags);
/* Grab the HW semaphore. */
- while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
- writel(dsiclk, (_PRCMU_BASE + PRCM_HDMICLK_MGT));
- writel(PRCMU_DSI_LP_CLOCK_SETTING, (_PRCMU_BASE + PRCM_TVCLK_MGT));
- writel(PRCMU_DPI_CLOCK_SETTING, (_PRCMU_BASE + PRCM_LCDCLK_MGT));
+ writel(dsiclk, PRCM_HDMICLK_MGT);
+ writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
+ writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
/* Release the HW semaphore. */
- writel(0, (_PRCMU_BASE + PRCM_SEM));
+ writel(0, PRCM_SEM);
spin_unlock_irqrestore(&clk_mgt_lock, flags);
@@ -578,8 +617,8 @@
unsigned long flags;
spin_lock_irqsave(&gpiocr_lock, flags);
- reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
- writel(reg | PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+ reg = readl(PRCM_GPIOCR);
+ writel(reg | PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
spin_unlock_irqrestore(&gpiocr_lock, flags);
}
@@ -592,8 +631,8 @@
unsigned long flags;
spin_lock_irqsave(&gpiocr_lock, flags);
- reg = readl(_PRCMU_BASE + PRCM_GPIOCR);
- writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, _PRCMU_BASE + PRCM_GPIOCR);
+ reg = readl(PRCM_GPIOCR);
+ writel(reg & ~PRCM_GPIOCR_SPI2_SELECT, PRCM_GPIOCR);
spin_unlock_irqrestore(&gpiocr_lock, flags);
}
@@ -701,7 +740,7 @@
spin_lock_irqsave(&clkout_lock, flags);
- val = readl(_PRCMU_BASE + PRCM_CLKOCR);
+ val = readl(PRCM_CLKOCR);
if (val & div_mask) {
if (div) {
if ((val & mask) != bits) {
@@ -715,7 +754,7 @@
}
}
}
- writel((bits | (val & ~mask)), (_PRCMU_BASE + PRCM_CLKOCR));
+ writel((bits | (val & ~mask)), PRCM_CLKOCR);
requests[clkout] += (div ? 1 : -1);
unlock_and_return:
@@ -724,7 +763,7 @@
return r;
}
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
{
unsigned long flags;
@@ -732,7 +771,7 @@
spin_lock_irqsave(&mb0_transfer.lock, flags);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writeb(MB0H_POWER_STATE_TRANS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
@@ -741,7 +780,7 @@
writeb((keep_ulp_clk ? 1 : 0),
(tcdm_base + PRCM_REQ_MB0_ULP_CLOCK_STATE));
writeb(0, (tcdm_base + PRCM_REQ_MB0_DO_NOT_WFI));
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
@@ -770,18 +809,18 @@
return;
for (i = 0; i < 2; i++) {
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writel(dbb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_8500));
writel(abb_events, (tcdm_base + PRCM_REQ_MB0_WAKEUP_4500));
writeb(header[i], (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
}
last_dbb_events = dbb_events;
last_abb_events = abb_events;
}
-void prcmu_enable_wakeups(u32 wakeups)
+void db8500_prcmu_enable_wakeups(u32 wakeups)
{
unsigned long flags;
u32 bits;
@@ -802,7 +841,7 @@
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
-void prcmu_config_abb_event_readout(u32 abb_events)
+void db8500_prcmu_config_abb_event_readout(u32 abb_events)
{
unsigned long flags;
@@ -814,7 +853,7 @@
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
-void prcmu_get_abb_event_buffer(void __iomem **buf)
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
{
if (readb(tcdm_base + PRCM_ACK_MB0_READ_POINTER) & 1)
*buf = (tcdm_base + PRCM_ACK_MB0_WAKEUP_1_4500);
@@ -823,13 +862,13 @@
}
/**
- * prcmu_set_arm_opp - set the appropriate ARM OPP
+ * db8500_prcmu_set_arm_opp - set the appropriate ARM OPP
* @opp: The new ARM operating point to which transition is to be made
* Returns: 0 on success, non-zero on failure
*
* This function sets the the operating point of the ARM.
*/
-int prcmu_set_arm_opp(u8 opp)
+int db8500_prcmu_set_arm_opp(u8 opp)
{
int r;
@@ -840,14 +879,14 @@
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
writeb(opp, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
writeb(APE_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -860,11 +899,11 @@
}
/**
- * prcmu_get_arm_opp - get the current ARM OPP
+ * db8500_prcmu_get_arm_opp - get the current ARM OPP
*
* Returns: the current ARM OPP
*/
-int prcmu_get_arm_opp(void)
+int db8500_prcmu_get_arm_opp(void)
{
return readb(tcdm_base + PRCM_ACK_MB1_CURRENT_ARM_OPP);
}
@@ -876,7 +915,7 @@
*/
int prcmu_get_ddr_opp(void)
{
- return readb(_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW);
+ return readb(PRCM_DDR_SUBSYS_APE_MINBW);
}
/**
@@ -892,7 +931,7 @@
return -EINVAL;
/* Changing the DDR OPP can hang the hardware pre-v21 */
if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
- writeb(opp, (_PRCMU_BASE + PRCM_DDR_SUBSYS_APE_MINBW));
+ writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
return 0;
}
@@ -909,14 +948,14 @@
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_ARM_APE_OPP, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
writeb(ARM_NO_CHANGE, (tcdm_base + PRCM_REQ_MB1_ARM_OPP));
writeb(opp, (tcdm_base + PRCM_REQ_MB1_APE_OPP));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
@@ -966,12 +1005,12 @@
header = MB1H_RELEASE_APE_OPP_100_VOLT;
}
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(header, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != header) ||
@@ -995,13 +1034,13 @@
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_RELEASE_USB_WAKEUP,
(tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
@@ -1013,15 +1052,169 @@
return r;
}
+static int request_pll(u8 clock, bool enable)
+{
+ int r = 0;
+
+ if (clock == PRCMU_PLLSOC1)
+ clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
+ else
+ return -EINVAL;
+
+ mutex_lock(&mb1_transfer.lock);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ cpu_relax();
+
+ writeb(MB1H_PLL_ON_OFF, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
+ writeb(clock, (tcdm_base + PRCM_REQ_MB1_PLL_ON_OFF));
+
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+ wait_for_completion(&mb1_transfer.work);
+
+ if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
+ r = -EIO;
+
+ mutex_unlock(&mb1_transfer.lock);
+
+ return r;
+}
+
/**
- * prcmu_set_epod - set the state of a EPOD (power domain)
+ * prcmu_set_hwacc - set the power state of a h/w accelerator
+ * @hwacc_dev: The hardware accelerator (enum hw_acc_dev).
+ * @state: The new power state (enum hw_acc_state).
+ *
+ * This function sets the power state of a hardware accelerator.
+ * This function should not be called from interrupt context.
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator framework API.
+ */
+int prcmu_set_hwacc(u16 hwacc_dev, u8 state)
+{
+ int r = 0;
+ bool ram_retention = false;
+ bool enable, enable_ret;
+
+ /* check argument */
+ BUG_ON(hwacc_dev >= NUM_HW_ACC);
+
+ /* get state of switches */
+ enable = hwacc_enabled[hwacc_dev];
+ enable_ret = hwacc_ret_enabled[hwacc_dev];
+
+ /* set flag if retention is possible */
+ switch (hwacc_dev) {
+ case HW_ACC_SVAMMDSP:
+ case HW_ACC_SIAMMDSP:
+ case HW_ACC_ESRAM1:
+ case HW_ACC_ESRAM2:
+ case HW_ACC_ESRAM3:
+ case HW_ACC_ESRAM4:
+ ram_retention = true;
+ break;
+ }
+
+ /* check argument */
+ BUG_ON(state > HW_ON);
+ BUG_ON(state == HW_OFF_RAMRET && !ram_retention);
+
+ /* modify enable flags */
+ switch (state) {
+ case HW_OFF:
+ enable_ret = false;
+ enable = false;
+ break;
+ case HW_ON:
+ enable = true;
+ break;
+ case HW_OFF_RAMRET:
+ enable_ret = true;
+ enable = false;
+ break;
+ }
+
+ /* get regulator (lazy) */
+ if (hwacc_regulator[hwacc_dev] == NULL) {
+ hwacc_regulator[hwacc_dev] = regulator_get(NULL,
+ hwacc_regulator_name[hwacc_dev]);
+ if (IS_ERR(hwacc_regulator[hwacc_dev])) {
+ pr_err("prcmu: failed to get supply %s\n",
+ hwacc_regulator_name[hwacc_dev]);
+ r = PTR_ERR(hwacc_regulator[hwacc_dev]);
+ goto out;
+ }
+ }
+
+ if (ram_retention) {
+ if (hwacc_ret_regulator[hwacc_dev] == NULL) {
+ hwacc_ret_regulator[hwacc_dev] = regulator_get(NULL,
+ hwacc_ret_regulator_name[hwacc_dev]);
+ if (IS_ERR(hwacc_ret_regulator[hwacc_dev])) {
+ pr_err("prcmu: failed to get supply %s\n",
+ hwacc_ret_regulator_name[hwacc_dev]);
+ r = PTR_ERR(hwacc_ret_regulator[hwacc_dev]);
+ goto out;
+ }
+ }
+ }
+
+ /* set regulators */
+ if (ram_retention) {
+ if (enable_ret && !hwacc_ret_enabled[hwacc_dev]) {
+ r = regulator_enable(hwacc_ret_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: ret enable failed\n");
+ goto out;
+ }
+ hwacc_ret_enabled[hwacc_dev] = true;
+ }
+ }
+
+ if (enable && !hwacc_enabled[hwacc_dev]) {
+ r = regulator_enable(hwacc_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: enable failed\n");
+ goto out;
+ }
+ hwacc_enabled[hwacc_dev] = true;
+ }
+
+ if (!enable && hwacc_enabled[hwacc_dev]) {
+ r = regulator_disable(hwacc_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: disable failed\n");
+ goto out;
+ }
+ hwacc_enabled[hwacc_dev] = false;
+ }
+
+ if (ram_retention) {
+ if (!enable_ret && hwacc_ret_enabled[hwacc_dev]) {
+ r = regulator_disable(hwacc_ret_regulator[hwacc_dev]);
+ if (r < 0) {
+ pr_err("prcmu_set_hwacc: ret disable failed\n");
+ goto out;
+ }
+ hwacc_ret_enabled[hwacc_dev] = false;
+ }
+ }
+
+out:
+ return r;
+}
+EXPORT_SYMBOL(prcmu_set_hwacc);
+
+/**
+ * db8500_prcmu_set_epod - set the state of a EPOD (power domain)
* @epod_id: The EPOD to set
* @epod_state: The new EPOD state
*
* This function sets the state of a EPOD (power domain). It may not be called
* from interrupt context.
*/
-int prcmu_set_epod(u16 epod_id, u8 epod_state)
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
{
int r = 0;
bool ram_retention = false;
@@ -1048,7 +1241,7 @@
mutex_lock(&mb2_transfer.lock);
/* wait for mailbox */
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
cpu_relax();
/* fill in mailbox */
@@ -1058,7 +1251,7 @@
writeb(MB2H_DPS, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB2));
- writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(2), PRCM_MBOX_CPU_SET);
/*
* The current firmware version does not handle errors correctly,
@@ -1145,13 +1338,13 @@
spin_lock_irqsave(&mb3_transfer.lock, flags);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
cpu_relax();
writeb((enable ? ON : OFF), (tcdm_base + PRCM_REQ_MB3_SYSCLK_MGT));
writeb(MB3H_SYSCLK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB3));
- writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb3_transfer.lock, flags);
@@ -1177,7 +1370,7 @@
if (!enable)
val |= PRCM_TCR_STOP_TIMERS;
- writel(val, (_PRCMU_BASE + PRCM_TCR));
+ writel(val, PRCM_TCR);
return 0;
}
@@ -1190,7 +1383,7 @@
spin_lock_irqsave(&clk_mgt_lock, flags);
/* Grab the HW semaphore. */
- while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1203,34 +1396,61 @@
writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
/* Release the HW semaphore. */
- writel(0, (_PRCMU_BASE + PRCM_SEM));
+ writel(0, PRCM_SEM);
spin_unlock_irqrestore(&clk_mgt_lock, flags);
return 0;
}
+static int request_sga_clock(u8 clock, bool enable)
+{
+ u32 val;
+ int ret;
+
+ if (enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ ret = request_reg_clock(clock, enable);
+
+ if (!ret && !enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ return ret;
+}
+
/**
- * prcmu_request_clock() - Request for a clock to be enabled or disabled.
+ * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
* @clock: The clock for which the request is made.
* @enable: Whether the clock should be enabled (true) or disabled (false).
*
* This function should only be used by the clock implementation.
* Do not use it from any other place!
*/
-int prcmu_request_clock(u8 clock, bool enable)
+int db8500_prcmu_request_clock(u8 clock, bool enable)
{
+ switch(clock) {
+ case PRCMU_SGACLK:
+ return request_sga_clock(clock, enable);
+ case PRCMU_TIMCLK:
+ return request_timclk(enable);
+ case PRCMU_SYSCLK:
+ return request_sysclk(enable);
+ case PRCMU_PLLSOC1:
+ return request_pll(clock, enable);
+ default:
+ break;
+ }
if (clock < PRCMU_NUM_REG_CLOCKS)
return request_reg_clock(clock, enable);
- else if (clock == PRCMU_TIMCLK)
- return request_timclk(enable);
- else if (clock == PRCMU_SYSCLK)
- return request_sysclk(enable);
- else
- return -EINVAL;
+ return -EINVAL;
}
-int prcmu_config_esram0_deep_sleep(u8 state)
+int db8500_prcmu_config_esram0_deep_sleep(u8 state)
{
if ((state > ESRAM0_DEEP_SLEEP_STATE_RET) ||
(state < ESRAM0_DEEP_SLEEP_STATE_OFF))
@@ -1238,7 +1458,7 @@
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writeb(MB4H_MEM_ST, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
@@ -1248,7 +1468,7 @@
(tcdm_base + PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE));
writeb(state, (tcdm_base + PRCM_REQ_MB4_ESRAM0_ST));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1260,13 +1480,13 @@
{
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writeb(threshold, (tcdm_base + PRCM_REQ_MB4_HOTDOG_THRESHOLD));
writeb(MB4H_HOTDOG, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1278,7 +1498,7 @@
{
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writeb(low, (tcdm_base + PRCM_REQ_MB4_HOTMON_LOW));
@@ -1287,7 +1507,7 @@
(tcdm_base + PRCM_REQ_MB4_HOTMON_CONFIG));
writeb(MB4H_HOTMON, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1299,13 +1519,13 @@
{
mutex_lock(&mb4_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
writew(val, (tcdm_base + PRCM_REQ_MB4_HOT_PERIOD));
writeb(MB4H_HOT_PERIOD, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb4_transfer.work);
mutex_unlock(&mb4_transfer.lock);
@@ -1326,6 +1546,78 @@
return config_hot_period(0xFFFF);
}
+static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
+{
+
+ mutex_lock(&mb4_transfer.lock);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
+ cpu_relax();
+
+ writeb(d0, (tcdm_base + PRCM_REQ_MB4_A9WDOG_0));
+ writeb(d1, (tcdm_base + PRCM_REQ_MB4_A9WDOG_1));
+ writeb(d2, (tcdm_base + PRCM_REQ_MB4_A9WDOG_2));
+ writeb(d3, (tcdm_base + PRCM_REQ_MB4_A9WDOG_3));
+
+ writeb(cmd, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB4));
+
+ writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
+ wait_for_completion(&mb4_transfer.work);
+
+ mutex_unlock(&mb4_transfer.lock);
+
+ return 0;
+
+}
+
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+ BUG_ON(num == 0 || num > 0xf);
+ return prcmu_a9wdog(MB4H_A9WDOG_CONF, num, 0, 0,
+ sleep_auto_off ? A9WDOG_AUTO_OFF_EN :
+ A9WDOG_AUTO_OFF_DIS);
+}
+
+int prcmu_enable_a9wdog(u8 id)
+{
+ return prcmu_a9wdog(MB4H_A9WDOG_EN, id, 0, 0, 0);
+}
+
+int prcmu_disable_a9wdog(u8 id)
+{
+ return prcmu_a9wdog(MB4H_A9WDOG_DIS, id, 0, 0, 0);
+}
+
+int prcmu_kick_a9wdog(u8 id)
+{
+ return prcmu_a9wdog(MB4H_A9WDOG_KICK, id, 0, 0, 0);
+}
+
+/*
+ * timeout is 28 bit, in ms.
+ */
+#define MAX_WATCHDOG_TIMEOUT 131000
+int prcmu_load_a9wdog(u8 id, u32 timeout)
+{
+ if (timeout > MAX_WATCHDOG_TIMEOUT)
+ /*
+ * Due to calculation bug in prcmu fw, timeouts
+ * can't be bigger than 131 seconds.
+ */
+ return -EINVAL;
+
+ return prcmu_a9wdog(MB4H_A9WDOG_LOAD,
+ (id & A9WDOG_ID_MASK) |
+ /*
+ * Put the lowest 28 bits of timeout at
+ * offset 4. Four first bits are used for id.
+ */
+ (u8)((timeout << 4) & 0xf0),
+ (u8)((timeout >> 4) & 0xff),
+ (u8)((timeout >> 12) & 0xff),
+ (u8)((timeout >> 20) & 0xff));
+}
+
/**
* prcmu_set_clock_divider() - Configure the clock divider.
* @clock: The clock for which the request is made.
@@ -1345,7 +1637,7 @@
spin_lock_irqsave(&clk_mgt_lock, flags);
/* Grab the HW semaphore. */
- while ((readl(_PRCMU_BASE + PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
@@ -1354,7 +1646,7 @@
writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
/* Release the HW semaphore. */
- writel(0, (_PRCMU_BASE + PRCM_SEM));
+ writel(0, PRCM_SEM);
spin_unlock_irqrestore(&clk_mgt_lock, flags);
@@ -1380,7 +1672,7 @@
mutex_lock(&mb5_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(PRCMU_I2C_READ(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1388,7 +1680,7 @@
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
writeb(0, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
- writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
if (!wait_for_completion_timeout(&mb5_transfer.work,
msecs_to_jiffies(20000))) {
@@ -1426,7 +1718,7 @@
mutex_lock(&mb5_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(PRCMU_I2C_WRITE(slave), (tcdm_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
@@ -1434,7 +1726,7 @@
writeb(reg, (tcdm_base + PRCM_REQ_MB5_I2C_REG));
writeb(*value, (tcdm_base + PRCM_REQ_MB5_I2C_VAL));
- writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
if (!wait_for_completion_timeout(&mb5_transfer.work,
msecs_to_jiffies(20000))) {
@@ -1456,21 +1748,44 @@
void prcmu_ac_wake_req(void)
{
u32 val;
+ u32 status;
mutex_lock(&mb0_transfer.ac_wake_lock);
- val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+ val = readl(PRCM_HOSTACCESS_REQ);
if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
goto unlock_and_return;
atomic_set(&ac_wake_req_state, 1);
- writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
- (_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+retry:
+ writel((val | PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ), PRCM_HOSTACCESS_REQ);
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
- msecs_to_jiffies(20000))) {
- pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+ msecs_to_jiffies(5000))) {
+ pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
+ __func__);
+ goto unlock_and_return;
+ }
+
+ /*
+ * The modem can generate an AC_WAKE_ACK, and then still go to sleep.
+ * As a workaround, we wait, and then check that the modem is indeed
+ * awake (in terms of the value of the PRCM_MOD_AWAKE_STATUS
+ * register, which may not be the whole truth).
+ */
+ udelay(400);
+ status = (readl(PRCM_MOD_AWAKE_STATUS) & BITS(0, 2));
+ if (status != (PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE |
+ PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE)) {
+ pr_err("prcmu: %s received ack, but modem not awake (0x%X).\n",
+ __func__, status);
+ udelay(1200);
+ writel(val, PRCM_HOSTACCESS_REQ);
+ if (wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+ msecs_to_jiffies(5000)))
+ goto retry;
+ pr_crit("prcmu: %s timed out (5 s) waiting for AC_SLEEP_ACK.\n",
__func__);
}
@@ -1487,16 +1802,16 @@
mutex_lock(&mb0_transfer.ac_wake_lock);
- val = readl(_PRCMU_BASE + PRCM_HOSTACCESS_REQ);
+ val = readl(PRCM_HOSTACCESS_REQ);
if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
goto unlock_and_return;
writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
- (_PRCMU_BASE + PRCM_HOSTACCESS_REQ));
+ PRCM_HOSTACCESS_REQ);
if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
- msecs_to_jiffies(20000))) {
- pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+ msecs_to_jiffies(5000))) {
+ pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
__func__);
}
@@ -1506,21 +1821,32 @@
mutex_unlock(&mb0_transfer.ac_wake_lock);
}
-bool prcmu_is_ac_wake_requested(void)
+bool db8500_prcmu_is_ac_wake_requested(void)
{
return (atomic_read(&ac_wake_req_state) != 0);
}
/**
- * prcmu_system_reset - System reset
+ * db8500_prcmu_system_reset - System reset
*
- * Saves the reset reason code and then sets the APE_SOFRST register which
+ * Saves the reset reason code and then sets the APE_SOFTRST register which
* fires interrupt to fw
*/
-void prcmu_system_reset(u16 reset_code)
+void db8500_prcmu_system_reset(u16 reset_code)
{
writew(reset_code, (tcdm_base + PRCM_SW_RST_REASON));
- writel(1, (_PRCMU_BASE + PRCM_APE_SOFTRST));
+ writel(1, PRCM_APE_SOFTRST);
+}
+
+/**
+ * db8500_prcmu_get_reset_code - Retrieve SW reset reason code
+ *
+ * Retrieves the reset reason code stored by prcmu_system_reset() before
+ * last restart.
+ */
+u16 db8500_prcmu_get_reset_code(void)
+{
+ return readw(tcdm_base + PRCM_SW_RST_REASON);
}
/**
@@ -1530,11 +1856,11 @@
{
mutex_lock(&mb1_transfer.lock);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_RESET_MODEM, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB1));
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb1_transfer.work);
/*
@@ -1551,11 +1877,11 @@
spin_lock_irqsave(&mb0_transfer.lock, flags);
- while (readl(_PRCMU_BASE + PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writeb(MB0H_READ_WAKEUP_ACK, (tcdm_base + PRCM_MBOX_HEADER_REQ_MB0));
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_MBOX_CPU_SET));
+ writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
@@ -1600,7 +1926,7 @@
r = false;
break;
}
- writel(MBOX_BIT(0), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
return r;
}
@@ -1613,7 +1939,7 @@
PRCM_ACK_MB1_CURRENT_APE_OPP);
mb1_transfer.ack.ape_voltage_status = readb(tcdm_base +
PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
- writel(MBOX_BIT(1), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
complete(&mb1_transfer.work);
return false;
}
@@ -1621,14 +1947,14 @@
static bool read_mailbox_2(void)
{
mb2_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB2_DPS_STATUS);
- writel(MBOX_BIT(2), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
complete(&mb2_transfer.work);
return false;
}
static bool read_mailbox_3(void)
{
- writel(MBOX_BIT(3), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
return false;
}
@@ -1643,6 +1969,11 @@
case MB4H_HOTDOG:
case MB4H_HOTMON:
case MB4H_HOT_PERIOD:
+ case MB4H_A9WDOG_CONF:
+ case MB4H_A9WDOG_EN:
+ case MB4H_A9WDOG_DIS:
+ case MB4H_A9WDOG_LOAD:
+ case MB4H_A9WDOG_KICK:
break;
default:
print_unknown_header_warning(4, header);
@@ -1650,7 +1981,7 @@
break;
}
- writel(MBOX_BIT(4), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
if (do_complete)
complete(&mb4_transfer.work);
@@ -1662,20 +1993,20 @@
{
mb5_transfer.ack.status = readb(tcdm_base + PRCM_ACK_MB5_I2C_STATUS);
mb5_transfer.ack.value = readb(tcdm_base + PRCM_ACK_MB5_I2C_VAL);
- writel(MBOX_BIT(5), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
complete(&mb5_transfer.work);
return false;
}
static bool read_mailbox_6(void)
{
- writel(MBOX_BIT(6), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_7(void)
{
- writel(MBOX_BIT(7), (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
return false;
}
@@ -1696,7 +2027,7 @@
u8 n;
irqreturn_t r;
- bits = (readl(_PRCMU_BASE + PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
+ bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
if (unlikely(!bits))
return IRQ_NONE;
@@ -1768,7 +2099,7 @@
.irq_unmask = prcmu_irq_unmask,
};
-void __init prcmu_early_init(void)
+void __init db8500_prcmu_early_init(void)
{
unsigned int i;
@@ -1826,6 +2157,16 @@
}
}
+static void __init db8500_prcmu_init_clkforce(void)
+{
+ u32 val;
+
+ val = readl(PRCM_A9PL_FORCE_CLKEN);
+ val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
+ PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
+ writel(val, (PRCM_A9PL_FORCE_CLKEN));
+}
+
/*
* Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
*/
@@ -1861,7 +2202,42 @@
static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
REGULATOR_SUPPLY("vsupply", "b2r2.0"),
- REGULATOR_SUPPLY("vsupply", "mcde.0"),
+ REGULATOR_SUPPLY("vsupply", "mcde"),
+};
+
+/* SVA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
+ REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
+};
+
+/* SVA pipe regulator switch */
+static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
+ REGULATOR_SUPPLY("sva-pipe", "cm_control"),
+};
+
+/* SIA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
+ REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
+};
+
+/* SIA pipe regulator switch */
+static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
+ REGULATOR_SUPPLY("sia-pipe", "cm_control"),
+};
+
+static struct regulator_consumer_supply db8500_sga_consumers[] = {
+ REGULATOR_SUPPLY("v-mali", NULL),
+};
+
+/* ESRAM1 and 2 regulator switch */
+static struct regulator_consumer_supply db8500_esram12_consumers[] = {
+ REGULATOR_SUPPLY("esram12", "cm_control"),
+};
+
+/* ESRAM3 and 4 regulator switch */
+static struct regulator_consumer_supply db8500_esram34_consumers[] = {
+ REGULATOR_SUPPLY("v-esram34", "mcde"),
+ REGULATOR_SUPPLY("esram34", "cm_control"),
};
static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
@@ -1923,6 +2299,8 @@
.name = "db8500-sva-mmdsp",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_svammdsp_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
},
[DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
.constraints = {
@@ -1937,6 +2315,8 @@
.name = "db8500-sva-pipe",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_svapipe_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
},
[DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
.supply_regulator = "db8500-vape",
@@ -1944,6 +2324,8 @@
.name = "db8500-sia-mmdsp",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_siammdsp_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
},
[DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
.constraints = {
@@ -1957,6 +2339,8 @@
.name = "db8500-sia-pipe",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_siapipe_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
},
[DB8500_REGULATOR_SWITCH_SGA] = {
.supply_regulator = "db8500-vape",
@@ -1964,6 +2348,9 @@
.name = "db8500-sga",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_sga_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
+
},
[DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
.supply_regulator = "db8500-vape",
@@ -1980,6 +2367,8 @@
.name = "db8500-esram12",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_esram12_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
},
[DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
.constraints = {
@@ -1993,6 +2382,8 @@
.name = "db8500-esram34",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .consumer_supplies = db8500_esram34_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
},
[DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
.constraints = {
@@ -2024,8 +2415,10 @@
if (ux500_is_svp())
return -ENODEV;
+ db8500_prcmu_init_clkforce();
+
/* Clean up the mailbox interrupts after pre-kernel code. */
- writel(ALL_MBOX_BITS, (_PRCMU_BASE + PRCM_ARM_IT1_CLR));
+ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
err = request_threaded_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler,
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
new file mode 100644
index 0000000..ec22e9f
--- /dev/null
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit registers
+ */
+
+#ifndef __DB8500_PRCMU_REGS_H
+#define __DB8500_PRCMU_REGS_H
+
+#include <mach/hardware.h>
+
+#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
+
+#define PRCM_SVACLK_MGT_OFF 0x008
+#define PRCM_SIACLK_MGT_OFF 0x00C
+#define PRCM_SGACLK_MGT_OFF 0x014
+#define PRCM_UARTCLK_MGT_OFF 0x018
+#define PRCM_MSP02CLK_MGT_OFF 0x01C
+#define PRCM_I2CCLK_MGT_OFF 0x020
+#define PRCM_SDMMCCLK_MGT_OFF 0x024
+#define PRCM_SLIMCLK_MGT_OFF 0x028
+#define PRCM_PER1CLK_MGT_OFF 0x02C
+#define PRCM_PER2CLK_MGT_OFF 0x030
+#define PRCM_PER3CLK_MGT_OFF 0x034
+#define PRCM_PER5CLK_MGT_OFF 0x038
+#define PRCM_PER6CLK_MGT_OFF 0x03C
+#define PRCM_PER7CLK_MGT_OFF 0x040
+#define PRCM_PWMCLK_MGT_OFF 0x044 /* for DB5500 */
+#define PRCM_IRDACLK_MGT_OFF 0x048 /* for DB5500 */
+#define PRCM_IRRCCLK_MGT_OFF 0x04C /* for DB5500 */
+#define PRCM_LCDCLK_MGT_OFF 0x044
+#define PRCM_BMLCLK_MGT_OFF 0x04C
+#define PRCM_HSITXCLK_MGT_OFF 0x050
+#define PRCM_HSIRXCLK_MGT_OFF 0x054
+#define PRCM_HDMICLK_MGT_OFF 0x058
+#define PRCM_APEATCLK_MGT_OFF 0x05C
+#define PRCM_APETRACECLK_MGT_OFF 0x060
+#define PRCM_MCDECLK_MGT_OFF 0x064
+#define PRCM_IPI2CCLK_MGT_OFF 0x068
+#define PRCM_DSIALTCLK_MGT_OFF 0x06C
+#define PRCM_DMACLK_MGT_OFF 0x074
+#define PRCM_B2R2CLK_MGT_OFF 0x078
+#define PRCM_TVCLK_MGT_OFF 0x07C
+#define PRCM_UNIPROCLK_MGT_OFF 0x278
+#define PRCM_SSPCLK_MGT_OFF 0x280
+#define PRCM_RNGCLK_MGT_OFF 0x284
+#define PRCM_UICCCLK_MGT_OFF 0x27C
+#define PRCM_MSP1CLK_MGT_OFF 0x288
+
+#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118)
+#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f
+#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xf
+
+#define PRCM_PLLARM_LOCKP (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
+
+#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ 0x1
+
+#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
+#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON 0x100
+
+#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN (_PRCMU_BASE + 0x19C)
+#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308)
+
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
+#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130)
+#define PRCM_IOCR (_PRCMU_BASE + 0x310)
+#define PRCM_IOCR_IOFORCE 0x1
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104)
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1
+
+#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334)
+#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
+#define ARM_WAKEUP_MODEM 0x1
+
+#define PRCM_ARM_IT1_CLR (_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174)
+
+#define PRCM_MOD_AWAKE_STATUS (_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE BIT(0)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE BIT(1)
+#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO BIT(2)
+
+#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504)
+#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
+#define PRCM_LCDCLK_MGT (_PRCMU_BASE + PRCM_LCDCLK_MGT_OFF)
+#define PRCM_MCDECLK_MGT (_PRCMU_BASE + PRCM_MCDECLK_MGT_OFF)
+#define PRCM_HDMICLK_MGT (_PRCMU_BASE + PRCM_HDMICLK_MGT_OFF)
+#define PRCM_TVCLK_MGT (_PRCMU_BASE + PRCM_TVCLK_MGT_OFF)
+#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C)
+#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
+#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8)
+
+#define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR_CLKOUT0_REF_CLK (1 << 0)
+#define PRCM_CLKOCR_CLKOUT0_MASK BITS(0, 13)
+#define PRCM_CLKOCR_CLKOUT1_REF_CLK (1 << 16)
+#define PRCM_CLKOCR_CLKOUT1_MASK BITS(16, 29)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324)
+#define PRCM_GPIOCR (_PRCMU_BASE + 0x138)
+#define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800
+#define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1
+
+/* PRCMU HW semaphore */
+#define PRCM_SEM (_PRCMU_BASE + 0x400)
+#define PRCM_SEM_PRCM_SEM BIT(0)
+
+#define PRCM_TCR (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR_TENSEL_MASK BITS(0, 7)
+#define PRCM_TCR_STOP_TIMERS BIT(16)
+#define PRCM_TCR_DOZE_MODE BIT(17)
+
+#define PRCM_CLKOCR_CLKODIV0_SHIFT 0
+#define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5)
+#define PRCM_CLKOCR_CLKOSEL0_SHIFT 6
+#define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8)
+#define PRCM_CLKOCR_CLKODIV1_SHIFT 16
+#define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21)
+#define PRCM_CLKOCR_CLKOSEL1_SHIFT 22
+#define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24)
+#define PRCM_CLKOCR_CLK1TYPE BIT(28)
+
+#define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4)
+#define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7)
+#define PRCM_CLK_MGT_CLKEN BIT(8)
+
+/* GPIOCR register */
+#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
+
+#define PRCM_DDR_SUBSYS_APE_MINBW (_PRCMU_BASE + 0x438)
+#define PRCM_CGATING_BYPASS (_PRCMU_BASE + 0x134)
+#define PRCM_CGATING_BYPASS_ICN2 BIT(6)
+
+/* Miscellaneous unit registers */
+#define PRCM_RESOUTN_SET (_PRCMU_BASE + 0x214)
+#define PRCM_RESOUTN_CLR (_PRCMU_BASE + 0x218)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
+
+#endif /* __DB8500_PRCMU_REGS_H */
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
new file mode 100644
index 0000000..97c2776
--- /dev/null
+++ b/drivers/mfd/intel_msic.c
@@ -0,0 +1,502 @@
+/*
+ * Driver for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/intel_scu_ipc.h>
+
+#define MSIC_VENDOR(id) ((id >> 6) & 3)
+#define MSIC_VERSION(id) (id & 0x3f)
+#define MSIC_MAJOR(id) ('A' + ((id >> 3) & 7))
+#define MSIC_MINOR(id) (id & 7)
+
+/*
+ * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
+ * Since IRQ block starts from address 0x002 we need to substract that from
+ * the actual IRQ status register address.
+ */
+#define MSIC_IRQ_STATUS(x) (INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
+#define MSIC_IRQ_STATUS_ACCDET MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
+
+/*
+ * The SCU hardware has limitation of 16 bytes per read/write buffer on
+ * Medfield.
+ */
+#define SCU_IPC_RWBUF_LIMIT 16
+
+/**
+ * struct intel_msic - an MSIC MFD instance
+ * @pdev: pointer to the platform device
+ * @vendor: vendor ID
+ * @version: chip version
+ * @irq_base: base address of the mapped MSIC SRAM interrupt tree
+ */
+struct intel_msic {
+ struct platform_device *pdev;
+ unsigned vendor;
+ unsigned version;
+ void __iomem *irq_base;
+};
+
+static struct resource msic_touch_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_adc_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_battery_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_gpio_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_audio_resources[] = {
+ {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ },
+ /*
+ * We will pass IRQ_BASE to the driver now but this can be removed
+ * when/if the driver starts to use intel_msic_irq_read().
+ */
+ {
+ .name = "IRQ_BASE",
+ .flags = IORESOURCE_MEM,
+ .start = MSIC_IRQ_STATUS_ACCDET,
+ .end = MSIC_IRQ_STATUS_ACCDET,
+ },
+};
+
+static struct resource msic_hdmi_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_thermal_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_power_btn_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource msic_ocd_resources[] = {
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * Devices that are part of the MSIC and are available via firmware
+ * populated SFI DEVS table.
+ */
+static struct mfd_cell msic_devs[] = {
+ [INTEL_MSIC_BLOCK_TOUCH] = {
+ .name = "msic_touch",
+ .num_resources = ARRAY_SIZE(msic_touch_resources),
+ .resources = msic_touch_resources,
+ },
+ [INTEL_MSIC_BLOCK_ADC] = {
+ .name = "msic_adc",
+ .num_resources = ARRAY_SIZE(msic_adc_resources),
+ .resources = msic_adc_resources,
+ },
+ [INTEL_MSIC_BLOCK_BATTERY] = {
+ .name = "msic_battery",
+ .num_resources = ARRAY_SIZE(msic_battery_resources),
+ .resources = msic_battery_resources,
+ },
+ [INTEL_MSIC_BLOCK_GPIO] = {
+ .name = "msic_gpio",
+ .num_resources = ARRAY_SIZE(msic_gpio_resources),
+ .resources = msic_gpio_resources,
+ },
+ [INTEL_MSIC_BLOCK_AUDIO] = {
+ .name = "msic_audio",
+ .num_resources = ARRAY_SIZE(msic_audio_resources),
+ .resources = msic_audio_resources,
+ },
+ [INTEL_MSIC_BLOCK_HDMI] = {
+ .name = "msic_hdmi",
+ .num_resources = ARRAY_SIZE(msic_hdmi_resources),
+ .resources = msic_hdmi_resources,
+ },
+ [INTEL_MSIC_BLOCK_THERMAL] = {
+ .name = "msic_thermal",
+ .num_resources = ARRAY_SIZE(msic_thermal_resources),
+ .resources = msic_thermal_resources,
+ },
+ [INTEL_MSIC_BLOCK_POWER_BTN] = {
+ .name = "msic_power_btn",
+ .num_resources = ARRAY_SIZE(msic_power_btn_resources),
+ .resources = msic_power_btn_resources,
+ },
+ [INTEL_MSIC_BLOCK_OCD] = {
+ .name = "msic_ocd",
+ .num_resources = ARRAY_SIZE(msic_ocd_resources),
+ .resources = msic_ocd_resources,
+ },
+};
+
+/*
+ * Other MSIC related devices which are not directly available via SFI DEVS
+ * table. These can be pseudo devices, regulators etc. which are needed for
+ * different purposes.
+ *
+ * These devices appear only after the MSIC driver itself is initialized so
+ * we can guarantee that the SCU IPC interface is ready.
+ */
+static struct mfd_cell msic_other_devs[] = {
+ /* Audio codec in the MSIC */
+ {
+ .id = -1,
+ .name = "sn95031",
+ },
+};
+
+/**
+ * intel_msic_reg_read - read a single MSIC register
+ * @reg: register to read
+ * @val: register value is placed here
+ *
+ * Read a single register from MSIC. Returns %0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_read(unsigned short reg, u8 *val)
+{
+ return intel_scu_ipc_ioread8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_read);
+
+/**
+ * intel_msic_reg_write - write a single MSIC register
+ * @reg: register to write
+ * @val: value to write to that register
+ *
+ * Write a single MSIC register. Returns 0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_write(unsigned short reg, u8 val)
+{
+ return intel_scu_ipc_iowrite8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_write);
+
+/**
+ * intel_msic_reg_update - update a single MSIC register
+ * @reg: register to update
+ * @val: value to write to the register
+ * @mask: specifies which of the bits are updated (%0 = don't update,
+ * %1 = update)
+ *
+ * Perform an update to a register @reg. @mask is used to specify which
+ * bits are updated. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
+{
+ return intel_scu_ipc_update_register(reg, val, mask);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_update);
+
+/**
+ * intel_msic_bulk_read - read an array of registers
+ * @reg: array of register addresses to read
+ * @buf: array where the read values are placed
+ * @count: number of registers to read
+ *
+ * Function reads @count registers from the MSIC using addresses passed in
+ * @reg. Read values are placed in @buf. Reads are performed atomically
+ * wrt. MSIC.
+ *
+ * Returns %0 in case of success and negative errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
+{
+ if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+ return -EINVAL;
+
+ return intel_scu_ipc_readv(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
+
+/**
+ * intel_msic_bulk_write - write an array of values to the MSIC registers
+ * @reg: array of registers to write
+ * @buf: values to write to each register
+ * @count: number of registers to write
+ *
+ * Function writes @count registers in @buf to MSIC. Writes are performed
+ * atomically wrt MSIC. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
+{
+ if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+ return -EINVAL;
+
+ return intel_scu_ipc_writev(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
+
+/**
+ * intel_msic_irq_read - read a register from an MSIC interrupt tree
+ * @msic: MSIC instance
+ * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
+ * %INTEL_MSIC_RESETIRQ2)
+ * @val: value of the register is placed here
+ *
+ * This function can be used by an MSIC subdevice interrupt handler to read
+ * a register value from the MSIC interrupt tree. In this way subdevice
+ * drivers don't have to map in the interrupt tree themselves but can just
+ * call this function instead.
+ *
+ * Function doesn't sleep and is callable from interrupt context.
+ *
+ * Returns %-EINVAL if @reg is outside of the allowed register region.
+ */
+int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
+{
+ if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
+ return -EINVAL;
+
+ *val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_msic_irq_read);
+
+static int __devinit intel_msic_init_devices(struct intel_msic *msic)
+{
+ struct platform_device *pdev = msic->pdev;
+ struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+ int ret, i;
+
+ if (pdata->gpio) {
+ struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
+
+ cell->platform_data = pdata->gpio;
+ cell->pdata_size = sizeof(*pdata->gpio);
+ }
+
+ if (pdata->ocd) {
+ unsigned gpio = pdata->ocd->gpio;
+
+ ret = gpio_request_one(gpio, GPIOF_IN, "ocd_gpio");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register OCD GPIO\n");
+ return ret;
+ }
+
+ ret = gpio_to_irq(gpio);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
+ gpio_free(gpio);
+ return ret;
+ }
+
+ /* Update the IRQ number for the OCD */
+ pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
+ if (!pdata->irq[i])
+ continue;
+
+ ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
+ pdata->irq[i]);
+ if (ret)
+ goto fail;
+ }
+
+ ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
+ ARRAY_SIZE(msic_other_devs), NULL, 0);
+ if (ret)
+ goto fail;
+
+ return 0;
+
+fail:
+ mfd_remove_devices(&pdev->dev);
+ if (pdata->ocd)
+ gpio_free(pdata->ocd->gpio);
+
+ return ret;
+}
+
+static void __devexit intel_msic_remove_devices(struct intel_msic *msic)
+{
+ struct platform_device *pdev = msic->pdev;
+ struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+
+ mfd_remove_devices(&pdev->dev);
+
+ if (pdata->ocd)
+ gpio_free(pdata->ocd->gpio);
+}
+
+static int __devinit intel_msic_probe(struct platform_device *pdev)
+{
+ struct intel_msic_platform_data *pdata = pdev->dev.platform_data;
+ struct intel_msic *msic;
+ struct resource *res;
+ u8 id0, id1;
+ int ret;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data passed\n");
+ return -EINVAL;
+ }
+
+ /* First validate that we have an MSIC in place */
+ ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
+ return -ENXIO;
+ }
+
+ ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
+ return -ENXIO;
+ }
+
+ if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
+ dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
+ return -ENXIO;
+ }
+
+ msic = kzalloc(sizeof(*msic), GFP_KERNEL);
+ if (!msic)
+ return -ENOMEM;
+
+ msic->vendor = MSIC_VENDOR(id0);
+ msic->version = MSIC_VERSION(id0);
+ msic->pdev = pdev;
+
+ /*
+ * Map in the MSIC interrupt tree area in SRAM. This is exposed to
+ * the clients via intel_msic_irq_read().
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get SRAM iomem resource\n");
+ ret = -ENODEV;
+ goto fail_free_msic;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ ret = -EBUSY;
+ goto fail_free_msic;
+ }
+
+ msic->irq_base = ioremap_nocache(res->start, resource_size(res));
+ if (!msic->irq_base) {
+ dev_err(&pdev->dev, "failed to map SRAM memory\n");
+ ret = -ENOMEM;
+ goto fail_release_region;
+ }
+
+ platform_set_drvdata(pdev, msic);
+
+ ret = intel_msic_init_devices(msic);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
+ goto fail_unmap_mem;
+ }
+
+ dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
+ MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
+ msic->vendor);
+
+ return 0;
+
+fail_unmap_mem:
+ iounmap(msic->irq_base);
+fail_release_region:
+ release_mem_region(res->start, resource_size(res));
+fail_free_msic:
+ kfree(msic);
+
+ return ret;
+}
+
+static int __devexit intel_msic_remove(struct platform_device *pdev)
+{
+ struct intel_msic *msic = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ intel_msic_remove_devices(msic);
+ platform_set_drvdata(pdev, NULL);
+ iounmap(msic->irq_base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(msic);
+
+ return 0;
+}
+
+static struct platform_driver intel_msic_driver = {
+ .probe = intel_msic_probe,
+ .remove = __devexit_p(intel_msic_remove),
+ .driver = {
+ .name = "intel_msic",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init intel_msic_init(void)
+{
+ return platform_driver_register(&intel_msic_driver);
+}
+module_init(intel_msic_init);
+
+static void __exit intel_msic_exit(void)
+{
+ platform_driver_unregister(&intel_msic_driver);
+}
+module_exit(intel_msic_exit);
+
+MODULE_DESCRIPTION("Driver for Intel MSIC");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 563654c..1e9ee53 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -328,7 +328,7 @@
return 0;
}
-struct platform_driver jz4740_adc_driver = {
+static struct platform_driver jz4740_adc_driver = {
.probe = jz4740_adc_probe,
.remove = __devexit_p(jz4740_adc_remove),
.driver = {
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index f83103b..dc58750 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
#include <linux/mfd/core.h>
@@ -142,7 +143,6 @@
max8997->irq_base = pdata->irq_base;
max8997->ono = pdata->ono;
- max8997->wakeup = pdata->wakeup;
mutex_init(&max8997->iolock);
@@ -169,6 +169,9 @@
if (ret < 0)
goto err_mfd;
+ /* MAX8997 has a power button input. */
+ device_init_wakeup(max8997->dev, pdata->wakeup);
+
return ret;
err_mfd:
@@ -398,7 +401,29 @@
return 0;
}
+static int max8997_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ irq_set_irq_wake(max8997->irq, 1);
+ return 0;
+}
+
+static int max8997_resume(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ irq_set_irq_wake(max8997->irq, 0);
+ return max8997_irq_resume(max8997);
+}
+
const struct dev_pm_ops max8997_pm = {
+ .suspend = max8997_suspend,
+ .resume = max8997_resume,
.freeze = max8997_freeze,
.restore = max8997_restore,
};
diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 7e4d44b..e9619ac 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -26,20 +26,10 @@
irq_handler_t irqhandler[MC13XXX_NUM_IRQ];
void *irqdata[MC13XXX_NUM_IRQ];
-};
-
-struct mc13783 {
- struct mc13xxx mc13xxx;
int adcflags;
};
-struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783)
-{
- return &mc13783->mc13xxx;
-}
-EXPORT_SYMBOL(mc13783_to_mc13xxx);
-
#define MC13XXX_IRQSTAT0 0
#define MC13XXX_IRQSTAT0_ADCDONEI (1 << 0)
#define MC13XXX_IRQSTAT0_ADCBISDONEI (1 << 1)
@@ -136,14 +126,14 @@
#define MC13XXX_REVISION_FAB (0x03 << 11)
#define MC13XXX_REVISION_ICIDCODE (0x3f << 13)
-#define MC13783_ADC1 44
-#define MC13783_ADC1_ADEN (1 << 0)
-#define MC13783_ADC1_RAND (1 << 1)
-#define MC13783_ADC1_ADSEL (1 << 3)
-#define MC13783_ADC1_ASC (1 << 20)
-#define MC13783_ADC1_ADTRIGIGN (1 << 21)
+#define MC13XXX_ADC1 44
+#define MC13XXX_ADC1_ADEN (1 << 0)
+#define MC13XXX_ADC1_RAND (1 << 1)
+#define MC13XXX_ADC1_ADSEL (1 << 3)
+#define MC13XXX_ADC1_ASC (1 << 20)
+#define MC13XXX_ADC1_ADTRIGIGN (1 << 21)
-#define MC13783_ADC2 45
+#define MC13XXX_ADC2 45
#define MC13XXX_NUMREGS 0x3f
@@ -487,7 +477,7 @@
MC13XXX_ID_INVALID,
};
-const char *mc13xxx_chipname[] = {
+static const char *mc13xxx_chipname[] = {
[MC13XXX_ID_MC13783] = "mc13783",
[MC13XXX_ID_MC13892] = "mc13892",
};
@@ -558,8 +548,6 @@
return mc13xxx_chipname[devid->driver_data];
}
-#include <linux/mfd/mc13783.h>
-
int mc13xxx_get_flags(struct mc13xxx *mc13xxx)
{
struct mc13xxx_platform_data *pdata =
@@ -569,15 +557,15 @@
}
EXPORT_SYMBOL(mc13xxx_get_flags);
-#define MC13783_ADC1_CHAN0_SHIFT 5
-#define MC13783_ADC1_CHAN1_SHIFT 8
+#define MC13XXX_ADC1_CHAN0_SHIFT 5
+#define MC13XXX_ADC1_CHAN1_SHIFT 8
struct mc13xxx_adcdone_data {
struct mc13xxx *mc13xxx;
struct completion done;
};
-static irqreturn_t mc13783_handler_adcdone(int irq, void *data)
+static irqreturn_t mc13xxx_handler_adcdone(int irq, void *data)
{
struct mc13xxx_adcdone_data *adcdone_data = data;
@@ -588,12 +576,11 @@
return IRQ_HANDLED;
}
-#define MC13783_ADC_WORKING (1 << 0)
+#define MC13XXX_ADC_WORKING (1 << 0)
-int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
unsigned int channel, unsigned int *sample)
{
- struct mc13xxx *mc13xxx = &mc13783->mc13xxx;
u32 adc0, adc1, old_adc0;
int i, ret;
struct mc13xxx_adcdone_data adcdone_data = {
@@ -605,51 +592,51 @@
mc13xxx_lock(mc13xxx);
- if (mc13783->adcflags & MC13783_ADC_WORKING) {
+ if (mc13xxx->adcflags & MC13XXX_ADC_WORKING) {
ret = -EBUSY;
goto out;
}
- mc13783->adcflags |= MC13783_ADC_WORKING;
+ mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
- mc13xxx_reg_read(mc13xxx, MC13783_ADC0, &old_adc0);
+ mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
- adc0 = MC13783_ADC0_ADINC1 | MC13783_ADC0_ADINC2;
- adc1 = MC13783_ADC1_ADEN | MC13783_ADC1_ADTRIGIGN | MC13783_ADC1_ASC;
+ adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
+ adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
if (channel > 7)
- adc1 |= MC13783_ADC1_ADSEL;
+ adc1 |= MC13XXX_ADC1_ADSEL;
switch (mode) {
- case MC13783_ADC_MODE_TS:
- adc0 |= MC13783_ADC0_ADREFEN | MC13783_ADC0_TSMOD0 |
- MC13783_ADC0_TSMOD1;
- adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+ case MC13XXX_ADC_MODE_TS:
+ adc0 |= MC13XXX_ADC0_ADREFEN | MC13XXX_ADC0_TSMOD0 |
+ MC13XXX_ADC0_TSMOD1;
+ adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
break;
- case MC13783_ADC_MODE_SINGLE_CHAN:
- adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
- adc1 |= (channel & 0x7) << MC13783_ADC1_CHAN0_SHIFT;
- adc1 |= MC13783_ADC1_RAND;
+ case MC13XXX_ADC_MODE_SINGLE_CHAN:
+ adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+ adc1 |= (channel & 0x7) << MC13XXX_ADC1_CHAN0_SHIFT;
+ adc1 |= MC13XXX_ADC1_RAND;
break;
- case MC13783_ADC_MODE_MULT_CHAN:
- adc0 |= old_adc0 & MC13783_ADC0_TSMOD_MASK;
- adc1 |= 4 << MC13783_ADC1_CHAN1_SHIFT;
+ case MC13XXX_ADC_MODE_MULT_CHAN:
+ adc0 |= old_adc0 & MC13XXX_ADC0_TSMOD_MASK;
+ adc1 |= 4 << MC13XXX_ADC1_CHAN1_SHIFT;
break;
default:
- mc13783_unlock(mc13783);
+ mc13xxx_unlock(mc13xxx);
return -EINVAL;
}
- dev_dbg(&mc13783->mc13xxx.spidev->dev, "%s: request irq\n", __func__);
- mc13xxx_irq_request(mc13xxx, MC13783_IRQ_ADCDONE,
- mc13783_handler_adcdone, __func__, &adcdone_data);
- mc13xxx_irq_ack(mc13xxx, MC13783_IRQ_ADCDONE);
+ dev_dbg(&mc13xxx->spidev->dev, "%s: request irq\n", __func__);
+ mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE,
+ mc13xxx_handler_adcdone, __func__, &adcdone_data);
+ mc13xxx_irq_ack(mc13xxx, MC13XXX_IRQ_ADCDONE);
- mc13xxx_reg_write(mc13xxx, MC13783_ADC0, adc0);
- mc13xxx_reg_write(mc13xxx, MC13783_ADC1, adc1);
+ mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0);
+ mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1);
mc13xxx_unlock(mc13xxx);
@@ -660,27 +647,27 @@
mc13xxx_lock(mc13xxx);
- mc13xxx_irq_free(mc13xxx, MC13783_IRQ_ADCDONE, &adcdone_data);
+ mc13xxx_irq_free(mc13xxx, MC13XXX_IRQ_ADCDONE, &adcdone_data);
if (ret > 0)
for (i = 0; i < 4; ++i) {
ret = mc13xxx_reg_read(mc13xxx,
- MC13783_ADC2, &sample[i]);
+ MC13XXX_ADC2, &sample[i]);
if (ret)
break;
}
- if (mode == MC13783_ADC_MODE_TS)
+ if (mode == MC13XXX_ADC_MODE_TS)
/* restore TSMOD */
- mc13xxx_reg_write(mc13xxx, MC13783_ADC0, old_adc0);
+ mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, old_adc0);
- mc13783->adcflags &= ~MC13783_ADC_WORKING;
+ mc13xxx->adcflags &= ~MC13XXX_ADC_WORKING;
out:
mc13xxx_unlock(mc13xxx);
return ret;
}
-EXPORT_SYMBOL_GPL(mc13783_adc_do_conversion);
+EXPORT_SYMBOL_GPL(mc13xxx_adc_do_conversion);
static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx,
const char *format, void *pdata, size_t pdata_size)
@@ -716,6 +703,11 @@
enum mc13xxx_id id;
int ret;
+ if (!pdata) {
+ dev_err(&spi->dev, "invalid platform data\n");
+ return -EINVAL;
+ }
+
mc13xxx = kzalloc(sizeof(*mc13xxx), GFP_KERNEL);
if (!mc13xxx)
return -ENOMEM;
@@ -763,10 +755,8 @@
if (pdata->flags & MC13XXX_USE_CODEC)
mc13xxx_add_subdevice(mc13xxx, "%s-codec");
- if (pdata->flags & MC13XXX_USE_REGULATOR) {
- mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
- &pdata->regulators, sizeof(pdata->regulators));
- }
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-regulator",
+ &pdata->regulators, sizeof(pdata->regulators));
if (pdata->flags & MC13XXX_USE_RTC)
mc13xxx_add_subdevice(mc13xxx, "%s-rtc");
@@ -774,10 +764,14 @@
if (pdata->flags & MC13XXX_USE_TOUCHSCREEN)
mc13xxx_add_subdevice(mc13xxx, "%s-ts");
- if (pdata->flags & MC13XXX_USE_LED)
+ if (pdata->leds)
mc13xxx_add_subdevice_pdata(mc13xxx, "%s-led",
pdata->leds, sizeof(*pdata->leds));
+ if (pdata->buttons)
+ mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton",
+ pdata->buttons, sizeof(*pdata->buttons));
+
return 0;
}
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index af5d9d0..cb4910a 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1226,7 +1226,7 @@
menelaus_write_reg(MENELAUS_MCT_CTRL1, 0x73);
if (client->irq > 0) {
- err = request_irq(client->irq, menelaus_irq, IRQF_DISABLED,
+ err = request_irq(client->irq, menelaus_irq, 0,
DRIVER_NAME, menelaus);
if (err) {
dev_dbg(&client->dev, "can't get IRQ %d, err %d\n",
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 57868416..ff1a7e7 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -23,45 +23,22 @@
#include <linux/i2c.h>
#include <linux/pm.h>
#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/err.h>
#include <linux/mfd/pcf50633/core.h>
-static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
- int ret;
-
- ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
- num, data);
- if (ret < 0)
- dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
-
- return ret;
-}
-
-static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
-{
- int ret;
-
- ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
- num, data);
- if (ret < 0)
- dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
-
- return ret;
-
-}
-
/* Read a block of up to 32 regs */
int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
int nr_regs, u8 *data)
{
int ret;
- mutex_lock(&pcf->lock);
- ret = __pcf50633_read(pcf, reg, nr_regs, data);
- mutex_unlock(&pcf->lock);
+ ret = regmap_raw_read(pcf->regmap, reg, data, nr_regs);
+ if (ret != 0)
+ return ret;
- return ret;
+ return nr_regs;
}
EXPORT_SYMBOL_GPL(pcf50633_read_block);
@@ -71,21 +48,22 @@
{
int ret;
- mutex_lock(&pcf->lock);
- ret = __pcf50633_write(pcf, reg, nr_regs, data);
- mutex_unlock(&pcf->lock);
+ ret = regmap_raw_write(pcf->regmap, reg, data, nr_regs);
+ if (ret != 0)
+ return ret;
- return ret;
+ return nr_regs;
}
EXPORT_SYMBOL_GPL(pcf50633_write_block);
u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg)
{
- u8 val;
+ unsigned int val;
+ int ret;
- mutex_lock(&pcf->lock);
- __pcf50633_read(pcf, reg, 1, &val);
- mutex_unlock(&pcf->lock);
+ ret = regmap_read(pcf->regmap, reg, &val);
+ if (ret < 0)
+ return -1;
return val;
}
@@ -93,56 +71,19 @@
int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val)
{
- int ret;
-
- mutex_lock(&pcf->lock);
- ret = __pcf50633_write(pcf, reg, 1, &val);
- mutex_unlock(&pcf->lock);
-
- return ret;
+ return regmap_write(pcf->regmap, reg, val);
}
EXPORT_SYMBOL_GPL(pcf50633_reg_write);
int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val)
{
- int ret;
- u8 tmp;
-
- val &= mask;
-
- mutex_lock(&pcf->lock);
- ret = __pcf50633_read(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- tmp &= ~mask;
- tmp |= val;
- ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
- mutex_unlock(&pcf->lock);
-
- return ret;
+ return regmap_update_bits(pcf->regmap, reg, mask, val);
}
EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask);
int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val)
{
- int ret;
- u8 tmp;
-
- mutex_lock(&pcf->lock);
- ret = __pcf50633_read(pcf, reg, 1, &tmp);
- if (ret < 0)
- goto out;
-
- tmp &= ~val;
- ret = __pcf50633_write(pcf, reg, 1, &tmp);
-
-out:
- mutex_unlock(&pcf->lock);
-
- return ret;
+ return regmap_update_bits(pcf->regmap, reg, val, 0);
}
EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits);
@@ -251,6 +192,11 @@
static SIMPLE_DEV_PM_OPS(pcf50633_pm, pcf50633_suspend, pcf50633_resume);
+static struct regmap_config pcf50633_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
static int __devinit pcf50633_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
@@ -272,16 +218,23 @@
mutex_init(&pcf->lock);
+ pcf->regmap = regmap_init_i2c(client, &pcf50633_regmap_config);
+ if (IS_ERR(pcf->regmap)) {
+ ret = PTR_ERR(pcf->regmap);
+ dev_err(pcf->dev, "Failed to allocate register map: %d\n",
+ ret);
+ goto err_free;
+ }
+
i2c_set_clientdata(client, pcf);
pcf->dev = &client->dev;
- pcf->i2c_client = client;
version = pcf50633_reg_read(pcf, 0);
variant = pcf50633_reg_read(pcf, 1);
if (version < 0 || variant < 0) {
dev_err(pcf->dev, "Unable to probe pcf50633\n");
ret = -ENODEV;
- goto err_free;
+ goto err_regmap;
}
dev_info(pcf->dev, "Probed device version %d variant %d\n",
@@ -328,6 +281,8 @@
return 0;
+err_regmap:
+ regmap_exit(pcf->regmap);
err_free:
kfree(pcf);
@@ -351,6 +306,7 @@
for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
platform_device_unregister(pcf->regulator_pdev[i]);
+ regmap_exit(pcf->regmap);
kfree(pcf);
return 0;
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index c27e515..de97974 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -357,6 +357,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int tc3589x_suspend(struct device *dev)
{
struct tc3589x *tc3589x = dev_get_drvdata(dev);
@@ -387,6 +388,7 @@
static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend,
tc3589x_resume);
+#endif
static const struct i2c_device_id tc3589x_id[] = {
{ "tc3589x", 24 },
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 696879e..02d6569 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -697,7 +697,7 @@
dev_err(&dev->dev, "The driver supports an older "
"version of the FPGA, please update the driver to "
"support %d.%d\n", priv->fw.major, priv->fw.minor);
- goto err_ioremap;
+ goto err_config;
}
if (priv->fw.major < TIMB_SUPPORTED_MAJOR ||
priv->fw.minor < TIMB_REQUIRED_MINOR) {
@@ -705,13 +705,13 @@
"please upgrade the FPGA to at least: %d.%d\n",
priv->fw.major, priv->fw.minor,
TIMB_SUPPORTED_MAJOR, TIMB_REQUIRED_MINOR);
- goto err_ioremap;
+ goto err_config;
}
msix_entries = kzalloc(TIMBERDALE_NR_IRQS * sizeof(*msix_entries),
GFP_KERNEL);
if (!msix_entries)
- goto err_ioremap;
+ goto err_config;
for (i = 0; i < TIMBERDALE_NR_IRQS; i++)
msix_entries[i].entry = i;
@@ -825,6 +825,8 @@
err_create_file:
pci_disable_msix(dev);
err_msix:
+ kfree(msix_entries);
+err_config:
iounmap(priv->ctl_membase);
err_ioremap:
release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
@@ -833,7 +835,6 @@
err_start:
pci_disable_device(dev);
err_enable:
- kfree(msix_entries);
kfree(priv);
pci_set_drvdata(dev, NULL);
return -ENODEV;
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 955bc00..5fec23a 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -131,9 +131,6 @@
if (init_data == NULL)
return -ENOMEM;
- init_data->irq = pmic_plat_data->irq;
- init_data->irq_base = pmic_plat_data->irq;
-
mutex_init(&tps65912->io_mutex);
dev_set_drvdata(tps65912->dev, tps65912);
@@ -153,10 +150,13 @@
if (ret < 0)
goto err;
+ init_data->irq = pmic_plat_data->irq;
+ init_data->irq_base = pmic_plat_data->irq;
ret = tps65912_irq_init(tps65912, init_data->irq, init_data);
if (ret < 0)
goto err;
+ kfree(init_data);
return ret;
err:
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 01ecfee..b8eef46 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -109,7 +109,7 @@
#define twl_has_watchdog() false
#endif
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+#if defined(CONFIG_MFD_TWL4030_AUDIO) || defined(CONFIG_MFD_TWL4030_AUDIO_MODULE) ||\
defined(CONFIG_TWL6040_CORE) || defined(CONFIG_TWL6040_CORE_MODULE)
#define twl_has_codec() true
#else
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index 8a7ee31..f062c8c 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -30,7 +30,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/kthread.h>
#include <linux/slab.h>
#include <linux/i2c/twl.h>
@@ -278,59 +277,6 @@
static unsigned twl4030_irq_base;
-static struct completion irq_event;
-
-/*
- * This thread processes interrupts reported by the Primary Interrupt Handler.
- */
-static int twl4030_irq_thread(void *data)
-{
- long irq = (long)data;
- static unsigned i2c_errors;
- static const unsigned max_i2c_errors = 100;
-
-
- current->flags |= PF_NOFREEZE;
-
- while (!kthread_should_stop()) {
- int ret;
- int module_irq;
- u8 pih_isr;
-
- /* Wait for IRQ, then read PIH irq status (also blocking) */
- wait_for_completion_interruptible(&irq_event);
-
- ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
- REG_PIH_ISR_P1);
- if (ret) {
- pr_warning("twl4030: I2C error %d reading PIH ISR\n",
- ret);
- if (++i2c_errors >= max_i2c_errors) {
- printk(KERN_ERR "Maximum I2C error count"
- " exceeded. Terminating %s.\n",
- __func__);
- break;
- }
- complete(&irq_event);
- continue;
- }
-
- /* these handlers deal with the relevant SIH irq status */
- local_irq_disable();
- for (module_irq = twl4030_irq_base;
- pih_isr;
- pih_isr >>= 1, module_irq++) {
- if (pih_isr & 0x1)
- generic_handle_irq(module_irq);
- }
- local_irq_enable();
-
- enable_irq(irq);
- }
-
- return 0;
-}
-
/*
* handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt.
* This is a chained interrupt, so there is no desc->action method for it.
@@ -342,9 +288,25 @@
*/
static irqreturn_t handle_twl4030_pih(int irq, void *devid)
{
- /* Acknowledge, clear *AND* mask the interrupt... */
- disable_irq_nosync(irq);
- complete(devid);
+ int module_irq;
+ irqreturn_t ret;
+ u8 pih_isr;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr,
+ REG_PIH_ISR_P1);
+ if (ret) {
+ pr_warning("twl4030: I2C error %d reading PIH ISR\n", ret);
+ return IRQ_NONE;
+ }
+
+ /* these handlers deal with the relevant SIH irq status */
+ for (module_irq = twl4030_irq_base;
+ pih_isr;
+ pih_isr >>= 1, module_irq++) {
+ if (pih_isr & 0x1)
+ handle_nested_irq(module_irq);
+ }
+
return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
@@ -460,114 +422,18 @@
/*----------------------------------------------------------------------*/
-static DEFINE_SPINLOCK(sih_agent_lock);
-
-static struct workqueue_struct *wq;
-
struct sih_agent {
int irq_base;
const struct sih *sih;
u32 imr;
bool imr_change_pending;
- struct work_struct mask_work;
u32 edge_change;
- struct work_struct edge_work;
+
+ struct mutex irq_lock;
};
-static void twl4030_sih_do_mask(struct work_struct *work)
-{
- struct sih_agent *agent;
- const struct sih *sih;
- union {
- u8 bytes[4];
- u32 word;
- } imr;
- int status;
-
- agent = container_of(work, struct sih_agent, mask_work);
-
- /* see what work we have */
- spin_lock_irq(&sih_agent_lock);
- if (agent->imr_change_pending) {
- sih = agent->sih;
- /* byte[0] gets overwritten as we write ... */
- imr.word = cpu_to_le32(agent->imr << 8);
- agent->imr_change_pending = false;
- } else
- sih = NULL;
- spin_unlock_irq(&sih_agent_lock);
- if (!sih)
- return;
-
- /* write the whole mask ... simpler than subsetting it */
- status = twl_i2c_write(sih->module, imr.bytes,
- sih->mask[irq_line].imr_offset, sih->bytes_ixr);
- if (status)
- pr_err("twl4030: %s, %s --> %d\n", __func__,
- "write", status);
-}
-
-static void twl4030_sih_do_edge(struct work_struct *work)
-{
- struct sih_agent *agent;
- const struct sih *sih;
- u8 bytes[6];
- u32 edge_change;
- int status;
-
- agent = container_of(work, struct sih_agent, edge_work);
-
- /* see what work we have */
- spin_lock_irq(&sih_agent_lock);
- edge_change = agent->edge_change;
- agent->edge_change = 0;
- sih = edge_change ? agent->sih : NULL;
- spin_unlock_irq(&sih_agent_lock);
- if (!sih)
- return;
-
- /* Read, reserving first byte for write scratch. Yes, this
- * could be cached for some speedup ... but be careful about
- * any processor on the other IRQ line, EDR registers are
- * shared.
- */
- status = twl_i2c_read(sih->module, bytes + 1,
- sih->edr_offset, sih->bytes_edr);
- if (status) {
- pr_err("twl4030: %s, %s --> %d\n", __func__,
- "read", status);
- return;
- }
-
- /* Modify only the bits we know must change */
- while (edge_change) {
- int i = fls(edge_change) - 1;
- struct irq_data *idata = irq_get_irq_data(i + agent->irq_base);
- int byte = 1 + (i >> 2);
- int off = (i & 0x3) * 2;
- unsigned int type;
-
- bytes[byte] &= ~(0x03 << off);
-
- type = irqd_get_trigger_type(idata);
- if (type & IRQ_TYPE_EDGE_RISING)
- bytes[byte] |= BIT(off + 1);
- if (type & IRQ_TYPE_EDGE_FALLING)
- bytes[byte] |= BIT(off + 0);
-
- edge_change &= ~BIT(i);
- }
-
- /* Write */
- status = twl_i2c_write(sih->module, bytes,
- sih->edr_offset, sih->bytes_edr);
- if (status)
- pr_err("twl4030: %s, %s --> %d\n", __func__,
- "write", status);
-}
-
/*----------------------------------------------------------------------*/
/*
@@ -579,50 +445,125 @@
static void twl4030_sih_mask(struct irq_data *data)
{
- struct sih_agent *sih = irq_data_get_irq_chip_data(data);
- unsigned long flags;
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
- spin_lock_irqsave(&sih_agent_lock, flags);
- sih->imr |= BIT(data->irq - sih->irq_base);
- sih->imr_change_pending = true;
- queue_work(wq, &sih->mask_work);
- spin_unlock_irqrestore(&sih_agent_lock, flags);
+ agent->imr |= BIT(data->irq - agent->irq_base);
+ agent->imr_change_pending = true;
}
static void twl4030_sih_unmask(struct irq_data *data)
{
- struct sih_agent *sih = irq_data_get_irq_chip_data(data);
- unsigned long flags;
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
- spin_lock_irqsave(&sih_agent_lock, flags);
- sih->imr &= ~BIT(data->irq - sih->irq_base);
- sih->imr_change_pending = true;
- queue_work(wq, &sih->mask_work);
- spin_unlock_irqrestore(&sih_agent_lock, flags);
+ agent->imr &= ~BIT(data->irq - agent->irq_base);
+ agent->imr_change_pending = true;
}
static int twl4030_sih_set_type(struct irq_data *data, unsigned trigger)
{
- struct sih_agent *sih = irq_data_get_irq_chip_data(data);
- unsigned long flags;
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
return -EINVAL;
- spin_lock_irqsave(&sih_agent_lock, flags);
- if (irqd_get_trigger_type(data) != trigger) {
- sih->edge_change |= BIT(data->irq - sih->irq_base);
- queue_work(wq, &sih->edge_work);
- }
- spin_unlock_irqrestore(&sih_agent_lock, flags);
+ if (irqd_get_trigger_type(data) != trigger)
+ agent->edge_change |= BIT(data->irq - agent->irq_base);
+
return 0;
}
+static void twl4030_sih_bus_lock(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&agent->irq_lock);
+}
+
+static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
+{
+ struct sih_agent *agent = irq_data_get_irq_chip_data(data);
+ const struct sih *sih = agent->sih;
+ int status;
+
+ if (agent->imr_change_pending) {
+ union {
+ u32 word;
+ u8 bytes[4];
+ } imr;
+
+ /* byte[0] gets overwriten as we write ... */
+ imr.word = cpu_to_le32(agent->imr << 8);
+ agent->imr_change_pending = false;
+
+ /* write the whole mask ... simpler than subsetting it */
+ status = twl_i2c_write(sih->module, imr.bytes,
+ sih->mask[irq_line].imr_offset,
+ sih->bytes_ixr);
+ if (status)
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "write", status);
+ }
+
+ if (agent->edge_change) {
+ u32 edge_change;
+ u8 bytes[6];
+
+ edge_change = agent->edge_change;
+ agent->edge_change = 0;
+
+ /*
+ * Read, reserving first byte for write scratch. Yes, this
+ * could be cached for some speedup ... but be careful about
+ * any processor on the other IRQ line, EDR registers are
+ * shared.
+ */
+ status = twl_i2c_read(sih->module, bytes + 1,
+ sih->edr_offset, sih->bytes_edr);
+ if (status) {
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "read", status);
+ return;
+ }
+
+ /* Modify only the bits we know must change */
+ while (edge_change) {
+ int i = fls(edge_change) - 1;
+ struct irq_data *idata;
+ int byte = 1 + (i >> 2);
+ int off = (i & 0x3) * 2;
+ unsigned int type;
+
+ idata = irq_get_irq_data(i + agent->irq_base);
+
+ bytes[byte] &= ~(0x03 << off);
+
+ type = irqd_get_trigger_type(idata);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ bytes[byte] |= BIT(off + 1);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ bytes[byte] |= BIT(off + 0);
+
+ edge_change &= ~BIT(i);
+ }
+
+ /* Write */
+ status = twl_i2c_write(sih->module, bytes,
+ sih->edr_offset, sih->bytes_edr);
+ if (status)
+ pr_err("twl4030: %s, %s --> %d\n", __func__,
+ "write", status);
+ }
+
+ mutex_unlock(&agent->irq_lock);
+}
+
static struct irq_chip twl4030_sih_irq_chip = {
.name = "twl4030",
- .irq_mask = twl4030_sih_mask,
+ .irq_mask = twl4030_sih_mask,
.irq_unmask = twl4030_sih_unmask,
.irq_set_type = twl4030_sih_set_type,
+ .irq_bus_lock = twl4030_sih_bus_lock,
+ .irq_bus_sync_unlock = twl4030_sih_bus_sync_unlock,
};
/*----------------------------------------------------------------------*/
@@ -655,9 +596,7 @@
int isr;
/* reading ISR acks the IRQs, using clear-on-read mode */
- local_irq_enable();
isr = sih_read_isr(sih);
- local_irq_disable();
if (isr < 0) {
pr_err("twl4030: %s SIH, read ISR error %d\n",
@@ -672,7 +611,7 @@
isr &= ~BIT(irq);
if (irq < sih->bits)
- generic_handle_irq(agent->irq_base + irq);
+ handle_nested_irq(agent->irq_base + irq);
else
pr_err("twl4030: %s SIH, invalid ISR bit %d\n",
sih->name, irq);
@@ -718,15 +657,14 @@
agent->irq_base = irq_base;
agent->sih = sih;
agent->imr = ~0;
- INIT_WORK(&agent->mask_work, twl4030_sih_do_mask);
- INIT_WORK(&agent->edge_work, twl4030_sih_do_edge);
+ mutex_init(&agent->irq_lock);
for (i = 0; i < sih->bits; i++) {
irq = irq_base + i;
+ irq_set_chip_data(irq, agent);
irq_set_chip_and_handler(irq, &twl4030_sih_irq_chip,
handle_edge_irq);
- irq_set_chip_data(irq, agent);
activate_irq(irq);
}
@@ -758,7 +696,6 @@
int status;
int i;
- struct task_struct *task;
/*
* Mask and clear all TWL4030 interrupts since initially we do
@@ -768,12 +705,6 @@
if (status < 0)
return status;
- wq = create_singlethread_workqueue("twl4030-irqchip");
- if (!wq) {
- pr_err("twl4030: workqueue FAIL\n");
- return -ESRCH;
- }
-
twl4030_irq_base = irq_base;
/* install an irq handler for each of the SIH modules;
@@ -787,6 +718,7 @@
for (i = irq_base; i < irq_end; i++) {
irq_set_chip_and_handler(i, &twl4030_irq_chip,
handle_simple_irq);
+ irq_set_nested_thread(i, 1);
activate_irq(i);
}
twl4030_irq_next = i;
@@ -801,34 +733,22 @@
}
/* install an irq handler to demultiplex the TWL4030 interrupt */
-
-
- init_completion(&irq_event);
-
- status = request_irq(irq_num, handle_twl4030_pih, IRQF_DISABLED,
- "TWL4030-PIH", &irq_event);
+ status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 0,
+ "TWL4030-PIH", NULL);
if (status < 0) {
pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status);
goto fail_rqirq;
}
- task = kthread_run(twl4030_irq_thread, (void *)(long)irq_num,
- "twl4030-irq");
- if (IS_ERR(task)) {
- pr_err("twl4030: could not create irq %d thread!\n", irq_num);
- status = PTR_ERR(task);
- goto fail_kthread;
- }
return status;
-fail_kthread:
- free_irq(irq_num, &irq_event);
fail_rqirq:
/* clean up twl4030_sih_setup */
fail:
- for (i = irq_base; i < irq_end; i++)
+ for (i = irq_base; i < irq_end; i++) {
+ irq_set_nested_thread(i, 0);
irq_set_chip_and_handler(i, NULL, NULL);
- destroy_workqueue(wq);
- wq = NULL;
+ }
+
return status;
}
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 7cbf2aa..834f824 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -740,6 +740,28 @@
TWL4030_BCI_BCICTL1);
goto err_i2c;
}
+
+ /* Check that MADC clock is on */
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, ®val, TWL4030_REG_GPBR1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to read reg GPBR1 0x%X\n",
+ TWL4030_REG_GPBR1);
+ goto err_i2c;
+ }
+
+ /* If MADC clk is not on, turn it on */
+ if (!(regval & TWL4030_GPBR1_MADC_HFCLK_EN)) {
+ dev_info(&pdev->dev, "clk disabled, enabling\n");
+ regval |= TWL4030_GPBR1_MADC_HFCLK_EN;
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, regval,
+ TWL4030_REG_GPBR1);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to write reg GPBR1 0x%X\n",
+ TWL4030_REG_GPBR1);
+ goto err_i2c;
+ }
+ }
+
platform_set_drvdata(pdev, madc);
mutex_init(&madc->lock);
ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL,
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index eb3b5f8..deec3ec 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -37,6 +37,7 @@
#include <linux/kthread.h>
#include <linux/i2c/twl.h>
#include <linux/platform_device.h>
+#include <linux/suspend.h>
#include "twl-core.h"
@@ -83,8 +84,48 @@
/*----------------------------------------------------------------------*/
static unsigned twl6030_irq_base;
+static int twl_irq;
+static bool twl_irq_wake_enabled;
static struct completion irq_event;
+static atomic_t twl6030_wakeirqs = ATOMIC_INIT(0);
+
+static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event, void *unused)
+{
+ int chained_wakeups;
+
+ switch (pm_event) {
+ case PM_SUSPEND_PREPARE:
+ chained_wakeups = atomic_read(&twl6030_wakeirqs);
+
+ if (chained_wakeups && !twl_irq_wake_enabled) {
+ if (enable_irq_wake(twl_irq))
+ pr_err("twl6030 IRQ wake enable failed\n");
+ else
+ twl_irq_wake_enabled = true;
+ } else if (!chained_wakeups && twl_irq_wake_enabled) {
+ disable_irq_wake(twl_irq);
+ twl_irq_wake_enabled = false;
+ }
+
+ disable_irq(twl_irq);
+ break;
+
+ case PM_POST_SUSPEND:
+ enable_irq(twl_irq);
+ break;
+
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block twl6030_irq_pm_notifier_block = {
+ .notifier_call = twl6030_irq_pm_notifier,
+};
/*
* This thread processes interrupts reported by the Primary Interrupt Handler.
@@ -187,6 +228,16 @@
#endif
}
+int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+ if (on)
+ atomic_inc(&twl6030_wakeirqs);
+ else
+ atomic_dec(&twl6030_wakeirqs);
+
+ return 0;
+}
+
/*----------------------------------------------------------------------*/
static unsigned twl6030_irq_next;
@@ -318,10 +369,12 @@
twl6030_irq_chip = dummy_irq_chip;
twl6030_irq_chip.name = "twl6030";
twl6030_irq_chip.irq_set_type = NULL;
+ twl6030_irq_chip.irq_set_wake = twl6030_irq_set_wake;
for (i = irq_base; i < irq_end; i++) {
irq_set_chip_and_handler(i, &twl6030_irq_chip,
handle_simple_irq);
+ irq_set_chip_data(i, (void *)irq_num);
activate_irq(i);
}
@@ -331,6 +384,14 @@
/* install an irq handler to demultiplex the TWL6030 interrupt */
init_completion(&irq_event);
+
+ status = request_irq(irq_num, handle_twl6030_pih, 0,
+ "TWL6030-PIH", &irq_event);
+ if (status < 0) {
+ pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
+ goto fail_irq;
+ }
+
task = kthread_run(twl6030_irq_thread, (void *)irq_num, "twl6030-irq");
if (IS_ERR(task)) {
pr_err("twl6030: could not create irq %d thread!\n", irq_num);
@@ -338,17 +399,14 @@
goto fail_kthread;
}
- status = request_irq(irq_num, handle_twl6030_pih, IRQF_DISABLED,
- "TWL6030-PIH", &irq_event);
- if (status < 0) {
- pr_err("twl6030: could not claim irq%d: %d\n", irq_num, status);
- goto fail_irq;
- }
+ twl_irq = irq_num;
+ register_pm_notifier(&twl6030_irq_pm_notifier_block);
return status;
-fail_irq:
- free_irq(irq_num, &irq_event);
fail_kthread:
+ free_irq(irq_num, &irq_event);
+
+fail_irq:
for (i = irq_base; i < irq_end; i++)
irq_set_chip_and_handler(i, NULL, NULL);
return status;
@@ -356,6 +414,7 @@
int twl6030_exit_irq(void)
{
+ unregister_pm_notifier(&twl6030_irq_pm_notifier_block);
if (twl6030_irq_base) {
pr_err("twl6030: can't yet clean up IRQs?\n");
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index ada1835..f4747a4 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -420,12 +420,19 @@
switch (type) {
case IRQ_TYPE_EDGE_BOTH:
wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_INT_MODE;
+ wm831x->gpio_level[irq] = false;
break;
case IRQ_TYPE_EDGE_RISING:
wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+ wm831x->gpio_level[irq] = false;
break;
case IRQ_TYPE_EDGE_FALLING:
wm831x->gpio_update[irq] = 0x10000;
+ wm831x->gpio_level[irq] = false;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ wm831x->gpio_update[irq] = 0x10000 | WM831X_GPN_POL;
+ wm831x->gpio_level[irq] = true;
break;
default:
return -EINVAL;
@@ -449,7 +456,7 @@
{
struct wm831x *wm831x = data;
unsigned int i;
- int primary, status_addr;
+ int primary, status_addr, ret;
int status_regs[WM831X_NUM_IRQ_REGS] = { 0 };
int read[WM831X_NUM_IRQ_REGS] = { 0 };
int *status;
@@ -507,6 +514,19 @@
if (*status & wm831x_irqs[i].mask)
handle_nested_irq(wm831x->irq_base + i);
+
+ /* Simulate an edge triggered IRQ by polling the input
+ * status. This is sucky but improves interoperability.
+ */
+ if (primary == WM831X_GP_INT &&
+ wm831x->gpio_level[i - WM831X_IRQ_GPIO_1]) {
+ ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+ while (ret & 1 << (i - WM831X_IRQ_GPIO_1)) {
+ handle_nested_irq(wm831x->irq_base + i);
+ ret = wm831x_reg_read(wm831x,
+ WM831X_GPIO_LEVEL);
+ }
+ }
}
out:
@@ -596,8 +616,6 @@
"No interrupt specified - functionality limited\n");
}
-
-
/* Enable top level interrupts, we mask at secondary level */
wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index b03be1d..5d6ba13 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -217,6 +217,47 @@
return 0;
}
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_4);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & (WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA |
+ WM8994_AIF1ADC2L_ENA | WM8994_AIF1ADC2R_ENA |
+ WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC1R_ENA)) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
+ ret = wm8994_reg_read(wm8994, WM8994_POWER_MANAGEMENT_5);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & (WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
+ WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA |
+ WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA)) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+
+ switch (wm8994->type) {
+ case WM8958:
+ ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read power status: %d\n", ret);
+ } else if (ret & WM8958_MICD_ENA) {
+ dev_dbg(dev, "CODEC still active, ignoring suspend\n");
+ return 0;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* Disable LDO pulldowns while the device is suspended if we
+ * don't know that something will be driving them. */
+ if (!wm8994->ldo_ena_always_driven)
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
+
/* GPIO configuration state is saved here since we may be configuring
* the GPIO alternate functions even if we're not using the gpiolib
* driver for them.
@@ -286,6 +327,11 @@
if (ret < 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
+ /* Disable LDO pulldowns while the device is active */
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ 0);
+
wm8994->suspended = false;
return 0;
@@ -467,8 +513,15 @@
pdata->gpio_defaults[i]);
}
}
+
+ wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
}
+ /* Disable LDO pulldowns while the device is active */
+ wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
+ WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
+ 0);
+
/* In some system designs where the regulators are not in use,
* we can achieve a small reduction in leakage currents by
* floating LDO outputs. This bit makes no difference if the
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 50d5f27..d593878 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -63,7 +63,7 @@
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
- depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
+ depends on HAVE_CLK
help
This option enables device driver support for the PWM channels
on certain Atmel processors. Pulse Width Modulation is used for
diff --git a/drivers/misc/vmw_balloon.c b/drivers/misc/vmw_balloon.c
index 053d36c..cd41d40 100644
--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -151,7 +151,7 @@
struct vmballoon_stats {
unsigned int timer;
- /* allocation statustics */
+ /* allocation statistics */
unsigned int alloc;
unsigned int alloc_fail;
unsigned int sleep_alloc;
@@ -412,6 +412,7 @@
gfp_t flags;
unsigned int hv_status;
bool locked = false;
+ flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
do {
if (!can_sleep)
@@ -419,7 +420,6 @@
else
STATS_INC(b->stats.sleep_alloc);
- flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
page = alloc_page(flags);
if (!page) {
if (!can_sleep)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 87d5067..cf444b0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -263,7 +263,7 @@
config MMC_AU1X
tristate "Alchemy AU1XX0 MMC Card Interface support"
- depends on SOC_AU1200
+ depends on MIPS_ALCHEMY
help
This selects the AMD Alchemy(R) Multimedia card interface.
If you have a Alchemy platform with a MMC slot, say Y or M here.
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 707bc7d..5d3b9ae 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -64,11 +64,8 @@
#define AU1XMMC_DESCRIPTOR_COUNT 1
/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */
-#ifdef CONFIG_SOC_AU1100
-#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff
-#else /* Au1200 */
-#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff
-#endif
+#define AU1100_MMC_DESCRIPTOR_SIZE 0x0000ffff
+#define AU1200_MMC_DESCRIPTOR_SIZE 0x003fffff
#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
@@ -127,6 +124,7 @@
#define HOST_F_XMIT 0x0001
#define HOST_F_RECV 0x0002
#define HOST_F_DMA 0x0010
+#define HOST_F_DBDMA 0x0020
#define HOST_F_ACTIVE 0x0100
#define HOST_F_STOP 0x1000
@@ -151,6 +149,16 @@
#define DMA_CHANNEL(h) \
(((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan)
+static inline int has_dbdma(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1200:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask)
{
u32 val = au_readl(HOST_CONFIG(host));
@@ -353,14 +361,12 @@
data->bytes_xfered = 0;
if (!data->error) {
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
u32 chan = DMA_CHANNEL(host);
chan_tab_t *c = *((chan_tab_t **)chan);
au1x_dma_chan_t *cp = c->chan_ptr;
data->bytes_xfered = cp->ddma_bytecnt;
-#endif
} else
data->bytes_xfered =
(data->blocks * data->blksz) - host->pio.len;
@@ -570,11 +576,10 @@
host->status = HOST_S_DATA;
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if ((host->flags & (HOST_F_DMA | HOST_F_DBDMA))) {
u32 channel = DMA_CHANNEL(host);
- /* Start the DMA as soon as the buffer gets something in it */
+ /* Start the DBDMA as soon as the buffer gets something in it */
if (host->flags & HOST_F_RECV) {
u32 mask = SD_STATUS_DB | SD_STATUS_NE;
@@ -584,7 +589,6 @@
}
au1xxx_dbdma_start(channel);
-#endif
}
}
@@ -633,8 +637,7 @@
au_writel(data->blksz - 1, HOST_BLKSIZE(host));
- if (host->flags & HOST_F_DMA) {
-#ifdef CONFIG_SOC_AU1200 /* DBDMA */
+ if (host->flags & (HOST_F_DMA | HOST_F_DBDMA)) {
int i;
u32 channel = DMA_CHANNEL(host);
@@ -663,7 +666,6 @@
datalen -= len;
}
-#endif
} else {
host->pio.index = 0;
host->pio.offset = 0;
@@ -838,7 +840,6 @@
return IRQ_HANDLED;
}
-#ifdef CONFIG_SOC_AU1200
/* 8bit memory DMA device */
static dbdev_tab_t au1xmmc_mem_dbdev = {
.dev_id = DSCR_CMD0_ALWAYS,
@@ -905,7 +906,7 @@
au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT);
/* DBDMA is good to go */
- host->flags |= HOST_F_DMA;
+ host->flags |= HOST_F_DMA | HOST_F_DBDMA;
return 0;
}
@@ -918,7 +919,6 @@
au1xxx_dbdma_chan_free(host->rx_chan);
}
}
-#endif
static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en)
{
@@ -997,8 +997,16 @@
mmc->f_min = 450000;
mmc->f_max = 24000000;
- mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
- mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1100:
+ mmc->max_seg_size = AU1100_MMC_DESCRIPTOR_SIZE;
+ mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ break;
+ case ALCHEMY_CPU_AU1200:
+ mmc->max_seg_size = AU1200_MMC_DESCRIPTOR_SIZE;
+ mmc->max_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ break;
+ }
mmc->max_blk_size = 2048;
mmc->max_blk_count = 512;
@@ -1028,11 +1036,11 @@
tasklet_init(&host->finish_task, au1xmmc_tasklet_finish,
(unsigned long)host);
-#ifdef CONFIG_SOC_AU1200
- ret = au1xmmc_dbdma_init(host);
- if (ret)
- pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
-#endif
+ if (has_dbdma()) {
+ ret = au1xmmc_dbdma_init(host);
+ if (ret)
+ pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
+ }
#ifdef CONFIG_LEDS_CLASS
if (host->platdata && host->platdata->led) {
@@ -1073,9 +1081,8 @@
au_writel(0, HOST_CONFIG2(host));
au_sync();
-#ifdef CONFIG_SOC_AU1200
- au1xmmc_dbdma_shutdown(host);
-#endif
+ if (host->flags & HOST_F_DBDMA)
+ au1xmmc_dbdma_shutdown(host);
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
@@ -1120,9 +1127,9 @@
tasklet_kill(&host->data_task);
tasklet_kill(&host->finish_task);
-#ifdef CONFIG_SOC_AU1200
- au1xmmc_dbdma_shutdown(host);
-#endif
+ if (host->flags & HOST_F_DBDMA)
+ au1xmmc_dbdma_shutdown(host);
+
au1xmmc_set_power(host, 0);
free_irq(host->irq, host);
@@ -1181,24 +1188,23 @@
static int __init au1xmmc_init(void)
{
-#ifdef CONFIG_SOC_AU1200
- /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
- * of 8 bits. And since devices are shared, we need to create
- * our own to avoid freaking out other devices.
- */
- memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
- if (!memid)
- pr_err("au1xmmc: cannot add memory dbdma dev\n");
-#endif
+ if (has_dbdma()) {
+ /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride
+ * of 8 bits. And since devices are shared, we need to create
+ * our own to avoid freaking out other devices.
+ */
+ memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
+ if (!memid)
+ pr_err("au1xmmc: cannot add memory dbdma\n");
+ }
return platform_driver_register(&au1xmmc_driver);
}
static void __exit au1xmmc_exit(void)
{
-#ifdef CONFIG_SOC_AU1200
- if (memid)
+ if (has_dbdma() && memid)
au1xxx_ddma_del_device(memid);
-#endif
+
platform_driver_unregister(&au1xmmc_driver);
}
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 0076c74..64a8325 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -807,12 +807,25 @@
static void mmc_davinci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmc_davinci_host *host = mmc_priv(mmc);
+ struct platform_device *pdev = to_platform_device(mmc->parent);
+ struct davinci_mmc_config *config = pdev->dev.platform_data;
dev_dbg(mmc_dev(host->mmc),
"clock %dHz busmode %d powermode %d Vdd %04x\n",
ios->clock, ios->bus_mode, ios->power_mode,
ios->vdd);
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ if (config && config->set_power)
+ config->set_power(pdev->id, false);
+ break;
+ case MMC_POWER_UP:
+ if (config && config->set_power)
+ config->set_power(pdev->id, true);
+ break;
+ }
+
switch (ios->bus_width) {
case MMC_BUS_WIDTH_8:
dev_dbg(mmc_dev(host->mmc), "Enabling 8 bit mode\n");
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index f48743d..325ea61 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -40,6 +40,7 @@
#include <mach/mmc.h>
#include <mach/dma.h>
+#include <mach/hardware.h>
#define DRIVER_NAME "mxc-mmc"
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e8ff123..101cd31 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1270,7 +1270,7 @@
}
} else {
if (!host->protect_card) {
- pr_info"%s: cover is open, "
+ pr_info("%s: cover is open, "
"card is now inaccessible\n",
mmc_hostname(host->mmc));
host->protect_card = 1;
diff --git a/drivers/mtd/maps/lantiq-flash.c b/drivers/mtd/maps/lantiq-flash.c
index a90cabd..7e50896 100644
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
@@ -182,7 +182,7 @@
parts = ltq_mtd_data->parts;
}
- err = add_mtd_partitions(ltq_mtd->mtd, parts, nr_parts);
+ err = mtd_device_register(ltq_mtd->mtd, parts, nr_parts);
if (err) {
dev_err(&pdev->dev, "failed to add partitions\n");
goto err_destroy;
@@ -208,7 +208,7 @@
if (ltq_mtd) {
if (ltq_mtd->mtd) {
- del_mtd_partitions(ltq_mtd->mtd);
+ mtd_device_unregister(ltq_mtd->mtd);
map_destroy(ltq_mtd->mtd);
}
if (ltq_mtd->map->virt)
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index f1af222..61086ea 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1144,7 +1144,7 @@
if (mtd_ino) {
/* Destroy the inode if it exists */
- mtd_ino->i_nlink = 0;
+ clear_nlink(mtd_ino);
iput(mtd_ino);
}
}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4c34252..dbfa0f7 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -138,7 +138,7 @@
config MTD_NAND_AU1550
tristate "Au1550/1200 NAND support"
- depends on SOC_AU1200 || SOC_AU1550
+ depends on MIPS_ALCHEMY
help
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index e7767ee..fa5736b 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -19,7 +19,11 @@
#include <linux/mtd/partitions.h>
#include <asm/io.h>
-#include <asm/mach-au1x00/au1xxx.h>
+#ifdef CONFIG_MIPS_PB1550
+#include <asm/mach-pb1x00/pb1550.h>
+#elif defined(CONFIG_MIPS_DB1550)
+#include <asm/mach-db1x00/db1x00.h>
+#endif
#include <asm/mach-db1x00/bcsr.h>
/*
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index c34cc1e..b2b9109 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -550,7 +550,7 @@
/*
* Get link speed and duplex from the slave's base driver
* using ethtool. If for some reason the call fails or the
- * values are invalid, fake speed and duplex to 100/Full
+ * values are invalid, set speed and duplex to -1,
* and return error.
*/
static int bond_update_speed_duplex(struct slave *slave)
@@ -560,9 +560,8 @@
u32 slave_speed;
int res;
- /* Fake speed and duplex */
- slave->speed = SPEED_100;
- slave->duplex = DUPLEX_FULL;
+ slave->speed = -1;
+ slave->duplex = -1;
res = __ethtool_get_settings(slave_dev, &ecmd);
if (res < 0)
@@ -1751,16 +1750,7 @@
new_slave->link = BOND_LINK_DOWN;
}
- if (bond_update_speed_duplex(new_slave) &&
- (new_slave->link != BOND_LINK_DOWN)) {
- pr_warning("%s: Warning: failed to get speed and duplex from %s, assumed to be 100Mb/sec and Full.\n",
- bond_dev->name, new_slave->dev->name);
-
- if (bond->params.mode == BOND_MODE_8023AD) {
- pr_warning("%s: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.\n",
- bond_dev->name);
- }
- }
+ bond_update_speed_duplex(new_slave);
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
@@ -3220,6 +3210,7 @@
{
struct net_device *bond_dev = slave_dev->master;
struct bonding *bond = netdev_priv(bond_dev);
+ struct slave *slave = NULL;
switch (event) {
case NETDEV_UNREGISTER:
@@ -3230,20 +3221,16 @@
bond_release(bond_dev, slave_dev);
}
break;
+ case NETDEV_UP:
case NETDEV_CHANGE:
- if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) {
- struct slave *slave;
+ slave = bond_get_slave_by_dev(bond, slave_dev);
+ if (slave) {
+ u32 old_speed = slave->speed;
+ u8 old_duplex = slave->duplex;
- slave = bond_get_slave_by_dev(bond, slave_dev);
- if (slave) {
- u32 old_speed = slave->speed;
- u8 old_duplex = slave->duplex;
+ bond_update_speed_duplex(slave);
- bond_update_speed_duplex(slave);
-
- if (bond_is_lb(bond))
- break;
-
+ if (bond->params.mode == BOND_MODE_8023AD) {
if (old_speed != slave->speed)
bond_3ad_adapter_speed_changed(slave);
if (old_duplex != slave->duplex)
diff --git a/drivers/net/bonding/bond_procfs.c b/drivers/net/bonding/bond_procfs.c
index 95de93b..d2ff52e 100644
--- a/drivers/net/bonding/bond_procfs.c
+++ b/drivers/net/bonding/bond_procfs.c
@@ -157,8 +157,16 @@
seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
seq_printf(seq, "MII Status: %s\n",
(slave->link == BOND_LINK_UP) ? "up" : "down");
- seq_printf(seq, "Speed: %d Mbps\n", slave->speed);
- seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half");
+ if (slave->speed == -1)
+ seq_printf(seq, "Speed: %s\n", "Unknown");
+ else
+ seq_printf(seq, "Speed: %d Mbps\n", slave->speed);
+
+ if (slave->duplex == -1)
+ seq_printf(seq, "Duplex: %s\n", "Unknown");
+ else
+ seq_printf(seq, "Duplex: %s\n", slave->duplex ? "full" : "half");
+
seq_printf(seq, "Link Failure Count: %u\n",
slave->link_failure_count);
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 6dff5a0..597f4d4 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -159,6 +159,7 @@
will be called s6gmac.
source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/silan/Kconfig"
source "drivers/net/ethernet/sis/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/sgi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index c53ad3a..be5dde0 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -58,6 +58,7 @@
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
+obj-$(CONFIG_NET_VENDOR_SILAN) += silan/
obj-$(CONFIG_NET_VENDOR_SIS) += sis/
obj-$(CONFIG_SFC) += sfc/
obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
index 8238667..4865ff1 100644
--- a/drivers/net/ethernet/amd/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -541,19 +541,17 @@
* these are not descriptors sitting in memory.
*/
static void
-au1000_setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
+au1000_setup_hw_rings(struct au1000_private *aup, void __iomem *tx_base)
{
int i;
for (i = 0; i < NUM_RX_DMA; i++) {
- aup->rx_dma_ring[i] =
- (struct rx_dma *)
- (rx_base + sizeof(struct rx_dma)*i);
+ aup->rx_dma_ring[i] = (struct rx_dma *)
+ (tx_base + 0x100 + sizeof(struct rx_dma) * i);
}
for (i = 0; i < NUM_TX_DMA; i++) {
- aup->tx_dma_ring[i] =
- (struct tx_dma *)
- (tx_base + sizeof(struct tx_dma)*i);
+ aup->tx_dma_ring[i] = (struct tx_dma *)
+ (tx_base + sizeof(struct tx_dma) * i);
}
}
@@ -1026,7 +1024,7 @@
struct net_device *dev = NULL;
struct db_dest *pDB, *pDBfree;
int irq, i, err = 0;
- struct resource *base, *macen;
+ struct resource *base, *macen, *macdma;
base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!base) {
@@ -1049,6 +1047,13 @@
goto out;
}
+ macdma = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ if (!macdma) {
+ dev_err(&pdev->dev, "failed to retrieve MACDMA registers\n");
+ err = -ENODEV;
+ goto out;
+ }
+
if (!request_mem_region(base->start, resource_size(base),
pdev->name)) {
dev_err(&pdev->dev, "failed to request memory region for base registers\n");
@@ -1063,6 +1068,13 @@
goto err_request;
}
+ if (!request_mem_region(macdma->start, resource_size(macdma),
+ pdev->name)) {
+ dev_err(&pdev->dev, "failed to request MACDMA memory region\n");
+ err = -ENXIO;
+ goto err_macdma;
+ }
+
dev = alloc_etherdev(sizeof(struct au1000_private));
if (!dev) {
dev_err(&pdev->dev, "alloc_etherdev failed\n");
@@ -1109,10 +1121,14 @@
}
aup->mac_id = pdev->id;
- if (pdev->id == 0)
- au1000_setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
- else if (pdev->id == 1)
- au1000_setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
+ aup->macdma = ioremap_nocache(macdma->start, resource_size(macdma));
+ if (!aup->macdma) {
+ dev_err(&pdev->dev, "failed to ioremap MACDMA registers\n");
+ err = -ENXIO;
+ goto err_remap3;
+ }
+
+ au1000_setup_hw_rings(aup, aup->macdma);
/* set a random MAC now in case platform_data doesn't provide one */
random_ether_addr(dev->dev_addr);
@@ -1252,6 +1268,8 @@
err_mdiobus_reg:
mdiobus_free(aup->mii_bus);
err_mdiobus_alloc:
+ iounmap(aup->macdma);
+err_remap3:
iounmap(aup->enable);
err_remap2:
iounmap(aup->mac);
@@ -1261,6 +1279,8 @@
err_vaddr:
free_netdev(dev);
err_alloc:
+ release_mem_region(macdma->start, resource_size(macdma));
+err_macdma:
release_mem_region(macen->start, resource_size(macen));
err_request:
release_mem_region(base->start, resource_size(base));
@@ -1293,9 +1313,13 @@
(NUM_TX_BUFFS + NUM_RX_BUFFS),
(void *)aup->vaddr, aup->dma_addr);
+ iounmap(aup->macdma);
iounmap(aup->mac);
iounmap(aup->enable);
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ release_mem_region(base->start, resource_size(base));
+
base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(base->start, resource_size(base));
diff --git a/drivers/net/ethernet/amd/au1000_eth.h b/drivers/net/ethernet/amd/au1000_eth.h
index 6229c77..4b7f7ad 100644
--- a/drivers/net/ethernet/amd/au1000_eth.h
+++ b/drivers/net/ethernet/amd/au1000_eth.h
@@ -124,7 +124,7 @@
*/
struct mac_reg *mac; /* mac registers */
u32 *enable; /* address of MAC Enable Register */
-
+ void __iomem *macdma; /* base of MAC DMA port */
u32 vaddr; /* virtual address of rx/tx buffers */
dma_addr_t dma_addr; /* dma address of rx/tx buffers */
diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig
index a759d54..1375e2d 100644
--- a/drivers/net/ethernet/apple/Kconfig
+++ b/drivers/net/ethernet/apple/Kconfig
@@ -52,18 +52,6 @@
To compile this driver as a module, choose M here: the module
will be called bmac.
-config MAC89x0
- tristate "Macintosh CS89x0 based ethernet cards"
- depends on MAC
- ---help---
- Support for CS89x0 chipset based Ethernet cards. If you have a
- Nubus or LC-PDS network (Ethernet) card of this type, say Y and
- read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. This module will
- be called mac89x0.
-
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet"
depends on MAC
diff --git a/drivers/net/ethernet/apple/Makefile b/drivers/net/ethernet/apple/Makefile
index 0d3a591..86eaa17 100644
--- a/drivers/net/ethernet/apple/Makefile
+++ b/drivers/net/ethernet/apple/Makefile
@@ -4,5 +4,4 @@
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
obj-$(CONFIG_MACMACE) += macmace.o
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index 6cbb81c..1f8648f 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -6,7 +6,7 @@
bool "Cirrus devices"
default y
depends on ISA || EISA || MACH_IXDP2351 || ARCH_IXDP2X01 \
- || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX)
+ || MACH_MX31ADS || MACH_QQ2440 || (ARM && ARCH_EP93XX) || MAC
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -47,4 +47,16 @@
This is a driver for the ethernet hardware included in EP93xx CPUs.
Say Y if you are building a kernel for EP93xx based devices.
+config MAC89x0
+ tristate "Macintosh CS89x0 based ethernet cards"
+ depends on MAC
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. This module will
+ be called mac89x0.
+
endif # NET_VENDOR_CIRRUS
diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile
index 14bd77e..ca245e2 100644
--- a/drivers/net/ethernet/cirrus/Makefile
+++ b/drivers/net/ethernet/cirrus/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
+obj-$(CONFIG_MAC89x0) += mac89x0.o
diff --git a/drivers/net/ethernet/apple/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c
similarity index 100%
rename from drivers/net/ethernet/apple/mac89x0.c
rename to drivers/net/ethernet/cirrus/mac89x0.c
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 824b8e6..2c7b366 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -318,8 +318,7 @@
if (msecs > 4000) {
dev_err(&adapter->pdev->dev, "mbox poll timed out\n");
- if (!lancer_chip(adapter))
- be_detect_dump_ue(adapter);
+ be_detect_dump_ue(adapter);
return -1;
}
@@ -1540,7 +1539,14 @@
req->if_flags_mask = req->if_flags =
cpu_to_le32(BE_IF_FLAGS_MULTICAST);
- req->mcast_num = cpu_to_le16(netdev_mc_count(adapter->netdev));
+
+ /* Reset mcast promisc mode if already set by setting mask
+ * and not setting flags field
+ */
+ req->if_flags_mask |=
+ cpu_to_le32(BE_IF_FLAGS_MCAST_PROMISCUOUS);
+
+ req->mcast_num = cpu_to_le32(netdev_mc_count(adapter->netdev));
netdev_for_each_mc_addr(ha, adapter->netdev)
memcpy(req->mcast_mac[i++].byte, ha->addr, ETH_ALEN);
}
diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index fbc8a91..f2c89e3 100644
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -48,6 +48,8 @@
/* Lancer SLIPORT_CONTROL SLIPORT_STATUS registers */
#define SLIPORT_STATUS_OFFSET 0x404
#define SLIPORT_CONTROL_OFFSET 0x408
+#define SLIPORT_ERROR1_OFFSET 0x40C
+#define SLIPORT_ERROR2_OFFSET 0x410
#define SLIPORT_STATUS_ERR_MASK 0x80000000
#define SLIPORT_STATUS_RN_MASK 0x01000000
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 2180497..e0aed18 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1905,6 +1905,8 @@
be_rx_stats_update(rxo, rxcp);
}
+ be_cq_notify(adapter, rx_cq->id, false, work_done);
+
/* Refill the queue */
if (work_done && atomic_read(&rxo->q.used) < RX_FRAGS_REFILL_WM)
be_post_rx_frags(rxo, GFP_ATOMIC);
@@ -1912,10 +1914,8 @@
/* All consumed */
if (work_done < budget) {
napi_complete(napi);
- be_cq_notify(adapter, rx_cq->id, true, work_done);
- } else {
- /* More to be consumed; continue with interrupts disabled */
- be_cq_notify(adapter, rx_cq->id, false, work_done);
+ /* Arm CQ */
+ be_cq_notify(adapter, rx_cq->id, true, 0);
}
return work_done;
}
@@ -1977,42 +1977,62 @@
void be_detect_dump_ue(struct be_adapter *adapter)
{
- u32 ue_status_lo, ue_status_hi, ue_status_lo_mask, ue_status_hi_mask;
+ u32 ue_lo = 0, ue_hi = 0, ue_lo_mask = 0, ue_hi_mask = 0;
+ u32 sliport_status = 0, sliport_err1 = 0, sliport_err2 = 0;
u32 i;
- pci_read_config_dword(adapter->pdev,
- PCICFG_UE_STATUS_LOW, &ue_status_lo);
- pci_read_config_dword(adapter->pdev,
- PCICFG_UE_STATUS_HIGH, &ue_status_hi);
- pci_read_config_dword(adapter->pdev,
- PCICFG_UE_STATUS_LOW_MASK, &ue_status_lo_mask);
- pci_read_config_dword(adapter->pdev,
- PCICFG_UE_STATUS_HI_MASK, &ue_status_hi_mask);
+ if (lancer_chip(adapter)) {
+ sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
+ if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
+ sliport_err1 = ioread32(adapter->db +
+ SLIPORT_ERROR1_OFFSET);
+ sliport_err2 = ioread32(adapter->db +
+ SLIPORT_ERROR2_OFFSET);
+ }
+ } else {
+ pci_read_config_dword(adapter->pdev,
+ PCICFG_UE_STATUS_LOW, &ue_lo);
+ pci_read_config_dword(adapter->pdev,
+ PCICFG_UE_STATUS_HIGH, &ue_hi);
+ pci_read_config_dword(adapter->pdev,
+ PCICFG_UE_STATUS_LOW_MASK, &ue_lo_mask);
+ pci_read_config_dword(adapter->pdev,
+ PCICFG_UE_STATUS_HI_MASK, &ue_hi_mask);
- ue_status_lo = (ue_status_lo & (~ue_status_lo_mask));
- ue_status_hi = (ue_status_hi & (~ue_status_hi_mask));
+ ue_lo = (ue_lo & (~ue_lo_mask));
+ ue_hi = (ue_hi & (~ue_hi_mask));
+ }
- if (ue_status_lo || ue_status_hi) {
+ if (ue_lo || ue_hi ||
+ sliport_status & SLIPORT_STATUS_ERR_MASK) {
adapter->ue_detected = true;
adapter->eeh_err = true;
dev_err(&adapter->pdev->dev, "UE Detected!!\n");
}
- if (ue_status_lo) {
- for (i = 0; ue_status_lo; ue_status_lo >>= 1, i++) {
- if (ue_status_lo & 1)
+ if (ue_lo) {
+ for (i = 0; ue_lo; ue_lo >>= 1, i++) {
+ if (ue_lo & 1)
dev_err(&adapter->pdev->dev,
"UE: %s bit set\n", ue_status_low_desc[i]);
}
}
- if (ue_status_hi) {
- for (i = 0; ue_status_hi; ue_status_hi >>= 1, i++) {
- if (ue_status_hi & 1)
+ if (ue_hi) {
+ for (i = 0; ue_hi; ue_hi >>= 1, i++) {
+ if (ue_hi & 1)
dev_err(&adapter->pdev->dev,
"UE: %s bit set\n", ue_status_hi_desc[i]);
}
}
+ if (sliport_status & SLIPORT_STATUS_ERR_MASK) {
+ dev_err(&adapter->pdev->dev,
+ "sliport status 0x%x\n", sliport_status);
+ dev_err(&adapter->pdev->dev,
+ "sliport error1 0x%x\n", sliport_err1);
+ dev_err(&adapter->pdev->dev,
+ "sliport error2 0x%x\n", sliport_err2);
+ }
}
static void be_worker(struct work_struct *work)
@@ -2022,7 +2042,7 @@
struct be_rx_obj *rxo;
int i;
- if (!adapter->ue_detected && !lancer_chip(adapter))
+ if (!adapter->ue_detected)
be_detect_dump_ue(adapter);
/* when interrupts are not yet enabled, just reap any pending
diff --git a/drivers/net/ethernet/i825xx/3c505.c b/drivers/net/ethernet/i825xx/3c505.c
index 40e1a17..ba82a26 100644
--- a/drivers/net/ethernet/i825xx/3c505.c
+++ b/drivers/net/ethernet/i825xx/3c505.c
@@ -126,15 +126,13 @@
*
*********************************************************/
-#define filename __FILE__
-
#define timeout_msg "*** timeout at %s:%s (line %d) ***\n"
#define TIMEOUT_MSG(lineno) \
- pr_notice(timeout_msg, filename, __func__, (lineno))
+ pr_notice(timeout_msg, __FILE__, __func__, (lineno))
#define invalid_pcb_msg "*** invalid pcb length %d at %s:%s (line %d) ***\n"
#define INVALID_PCB_MSG(len) \
- pr_notice(invalid_pcb_msg, (len), filename, __func__, __LINE__)
+ pr_notice(invalid_pcb_msg, (len), __FILE__, __func__, __LINE__)
#define search_msg "%s: Looking for 3c505 adapter at address %#x..."
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index ae17cd1..5a2fdf7 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -2810,6 +2810,10 @@
e100_get_defaults(nic);
+ /* D100 MAC doesn't allow rx of vlan packets with normal MTU */
+ if (nic->mac < mac_82558_D101_A4)
+ netdev->features |= NETIF_F_VLAN_CHALLENGED;
+
/* locks must be initialized before calling hw_reset */
spin_lock_init(&nic->cb_lock);
spin_lock_init(&nic->cmd_lock);
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 6a17c62..e2a80a2 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -866,8 +866,7 @@
if (test_and_set_bit(__E1000_ACCESS_SHARED_RESOURCE,
&hw->adapter->state)) {
- WARN(1, "e1000e: %s: contention for Phy access\n",
- hw->adapter->netdev->name);
+ e_dbg("contention for Phy access\n");
return -E1000_ERR_PHY;
}
diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index 7edf31e..b17d7c2 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1687,7 +1687,7 @@
if (ret_val)
goto out;
- is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+ is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
/* Populate the phy structure with cable length in meters */
phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 834f044..f1365fe 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -3344,7 +3344,7 @@
static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
u32 length)
{
- u32 hicr, i;
+ u32 hicr, i, bi;
u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
u8 buf_len, dword_len;
@@ -3398,9 +3398,9 @@
dword_len = hdr_size >> 2;
/* first pull in the header so we know the buffer length */
- for (i = 0; i < dword_len; i++) {
- buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
- le32_to_cpus(&buffer[i]);
+ for (bi = 0; bi < dword_len; bi++) {
+ buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+ le32_to_cpus(&buffer[bi]);
}
/* If there is any thing in data position pull it in */
@@ -3414,12 +3414,14 @@
goto out;
}
- /* Calculate length in DWORDs, add one for odd lengths */
- dword_len = (buf_len + 1) >> 2;
+ /* Calculate length in DWORDs, add 3 for odd lengths */
+ dword_len = (buf_len + 3) >> 2;
- /* Pull in the rest of the buffer (i is where we left off)*/
- for (; i < buf_len; i++)
- buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
+ /* Pull in the rest of the buffer (bi is where we left off)*/
+ for (; bi <= dword_len; bi++) {
+ buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
+ le32_to_cpus(&buffer[bi]);
+ }
out:
return ret_val;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
index 3631d63..33b93ff 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c
@@ -561,11 +561,12 @@
struct ixgbe_adapter *adapter = netdev_priv(dev);
struct ieee_ets *my_ets = adapter->ixgbe_ieee_ets;
+ ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs;
+
/* No IEEE PFC settings available */
if (!my_ets)
- return -EINVAL;
+ return 0;
- ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs;
ets->cbs = my_ets->cbs;
memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
memcpy(ets->tc_rx_bw, my_ets->tc_rx_bw, sizeof(ets->tc_rx_bw));
@@ -621,11 +622,12 @@
struct ieee_pfc *my_pfc = adapter->ixgbe_ieee_pfc;
int i;
+ pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs;
+
/* No IEEE PFC settings available */
if (!my_pfc)
- return -EINVAL;
+ return 0;
- pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs;
pfc->pfc_en = my_pfc->pfc_en;
pfc->mbc = my_pfc->mbc;
pfc->delay = my_pfc->delay;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 09b8e88..8ef92d1 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3345,34 +3345,25 @@
hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
+#ifdef IXGBE_FCOE
+ if (adapter->netdev->features & NETIF_F_FCOE_MTU)
+ max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
+#endif
+
/* reconfigure the hardware */
if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) {
-#ifdef IXGBE_FCOE
- if (adapter->netdev->features & NETIF_F_FCOE_MTU)
- max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
-#endif
ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
DCB_TX_CONFIG);
ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
DCB_RX_CONFIG);
ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
- } else {
- struct net_device *dev = adapter->netdev;
-
- if (adapter->ixgbe_ieee_ets) {
- struct ieee_ets *ets = adapter->ixgbe_ieee_ets;
- int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
-
- ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame);
- }
-
- if (adapter->ixgbe_ieee_pfc) {
- struct ieee_pfc *pfc = adapter->ixgbe_ieee_pfc;
- u8 *prio_tc = adapter->ixgbe_ieee_ets->prio_tc;
-
- ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en,
- prio_tc);
- }
+ } else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) {
+ ixgbe_dcb_hw_ets(&adapter->hw,
+ adapter->ixgbe_ieee_ets,
+ max_frame);
+ ixgbe_dcb_hw_pfc_config(&adapter->hw,
+ adapter->ixgbe_ieee_pfc->pfc_en,
+ adapter->ixgbe_ieee_ets->prio_tc);
}
/* Enable RSS Hash per TC */
@@ -6125,7 +6116,6 @@
autoneg = hw->phy.autoneg_advertised;
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
- hw->mac.autotry_restart = false;
if (hw->mac.ops.setup_link)
hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
@@ -7589,13 +7579,6 @@
goto err_eeprom;
}
- /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
- if (hw->mac.ops.disable_tx_laser &&
- ((hw->phy.multispeed_fiber) ||
- ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
- (hw->mac.type == ixgbe_mac_82599EB))))
- hw->mac.ops.disable_tx_laser(hw);
-
setup_timer(&adapter->service_timer, &ixgbe_service_timer,
(unsigned long) adapter);
@@ -7693,6 +7676,13 @@
if (err)
goto err_register;
+ /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
+ if (hw->mac.ops.disable_tx_laser &&
+ ((hw->phy.multispeed_fiber) ||
+ ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ (hw->mac.type == ixgbe_mac_82599EB))))
+ hw->mac.ops.disable_tx_laser(hw);
+
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
index 5a7e1eb..4a5d889 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
@@ -42,10 +42,12 @@
int ixgbe_ndo_get_vf_config(struct net_device *netdev,
int vf, struct ifla_vf_info *ivi);
void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter);
+#ifdef CONFIG_PCI_IOV
void ixgbe_disable_sriov(struct ixgbe_adapter *adapter);
void ixgbe_enable_sriov(struct ixgbe_adapter *adapter,
const struct ixgbe_info *ii);
int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter);
+#endif
#endif /* _IXGBE_SRIOV_H_ */
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 5e92cc2..4c8e199 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -54,7 +54,7 @@
static const char ixgbevf_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver";
-#define DRV_VERSION "2.1.0-k"
+#define DRV_VERSION "2.2.0-k"
const char ixgbevf_driver_version[] = DRV_VERSION;
static char ixgbevf_copyright[] =
"Copyright (c) 2009 - 2010 Intel Corporation.";
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 84083ec..0578859 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -115,16 +115,4 @@
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
-config SC92031
- tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
- select CRC32
- ---help---
- This is a driver for the Fast Ethernet PCI network cards based on
- the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
- have one of these, say Y here.
-
- To compile this driver as a module, choose M here: the module
- will be called sc92031. This is recommended.
-
endif # NET_VENDOR_REALTEK
diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile
index e48cfb6..71b1da3 100644
--- a/drivers/net/ethernet/realtek/Makefile
+++ b/drivers/net/ethernet/realtek/Makefile
@@ -6,4 +6,3 @@
obj-$(CONFIG_8139TOO) += 8139too.o
obj-$(CONFIG_ATP) += atp.o
obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig
new file mode 100644
index 0000000..ae1ce17
--- /dev/null
+++ b/drivers/net/ethernet/silan/Kconfig
@@ -0,0 +1,33 @@
+#
+# Silan device configuration
+#
+
+config NET_VENDOR_SILAN
+ bool "Silan devices"
+ default y
+ depends on PCI && EXPERIMENTAL
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Silan devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_SILAN
+
+config SC92031
+ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+ have one of these, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sc92031. This is recommended.
+
+endif # NET_VENDOR_SILAN
diff --git a/drivers/net/ethernet/silan/Makefile b/drivers/net/ethernet/silan/Makefile
new file mode 100644
index 0000000..4ad3523
--- /dev/null
+++ b/drivers/net/ethernet/silan/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Silan network device drivers.
+#
+
+obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/ethernet/realtek/sc92031.c b/drivers/net/ethernet/silan/sc92031.c
similarity index 100%
rename from drivers/net/ethernet/realtek/sc92031.c
rename to drivers/net/ethernet/silan/sc92031.c
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index 4d1658e..caf3659 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -716,8 +716,8 @@
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
cur_p->phys = dma_map_single(ndev->dev.parent,
skb_frag_address(frag),
- frag_size(frag), DMA_TO_DEVICE);
- cur_p->len = frag_size(frag);
+ skb_frag_size(frag), DMA_TO_DEVICE);
+ cur_p->len = skb_frag_size(frag);
cur_p->app0 = 0;
frag++;
}
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index a40fab4..d423d18 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -314,7 +314,7 @@
config AU1000_FIR
tristate "Alchemy Au1000 SIR/FIR"
- depends on SOC_AU1000 && IRDA
+ depends on IRDA && MIPS_ALCHEMY
config SMC_IRCC_FIR
tristate "SMSC IrCC (EXPERIMENTAL)"
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index 3bb1311..7145714 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -88,8 +88,8 @@
#define dev_rionet_capable(dev) \
is_rionet_capable(dev->src_ops, dev->dst_ops)
-#define RIONET_MAC_MATCH(x) (*(u32 *)x == 0x00010001)
-#define RIONET_GET_DESTID(x) (*(u16 *)(x + 4))
+#define RIONET_MAC_MATCH(x) (!memcmp((x), "\00\01\00\01", 4))
+#define RIONET_GET_DESTID(x) ((*((u8 *)x + 4) << 8) | *((u8 *)x + 5))
static int rionet_rx_clean(struct net_device *ndev)
{
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 91039ab..6ee8410 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -925,12 +925,10 @@
{
u16 v;
- if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS))
- return;
-
- vi->vdev->config->get(vi->vdev,
+ if (virtio_config_val(vi->vdev, VIRTIO_NET_F_STATUS,
offsetof(struct virtio_net_config, status),
- &v, sizeof(v));
+ &v) < 0)
+ return;
/* Ignore unknown (future) status bits */
v &= VIRTIO_NET_S_LINK_UP;
@@ -1006,11 +1004,9 @@
}
/* Configuration may specify what MAC to use. Otherwise random. */
- if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
- vdev->config->get(vdev,
+ if (virtio_config_val_len(vdev, VIRTIO_NET_F_MAC,
offsetof(struct virtio_net_config, mac),
- dev->dev_addr, dev->addr_len);
- } else
+ dev->dev_addr, dev->addr_len) < 0)
random_ether_addr(dev->dev_addr);
/* Set up our device-specific information */
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 0735488..0960224 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,6 +1,6 @@
menuconfig ATH_COMMON
tristate "Atheros Wireless Cards"
- depends on CFG80211
+ depends on CFG80211 && (!UML || BROKEN)
---help---
This will enable the support for the Atheros wireless drivers.
ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
index 45e1476..d6c42e6 100644
--- a/drivers/net/wireless/rtlwifi/Kconfig
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -12,7 +12,7 @@
config RTL8192SE
tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter"
- depends on MAC80211 && EXPERIMENTAL
+ depends on MAC80211 && EXPERIMENTAL && PCI
select FW_LOADER
select RTLWIFI
---help---
@@ -23,7 +23,7 @@
config RTL8192DE
tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter"
- depends on MAC80211 && EXPERIMENTAL
+ depends on MAC80211 && EXPERIMENTAL && PCI
select FW_LOADER
select RTLWIFI
---help---
diff --git a/drivers/of/base.c b/drivers/of/base.c
index b970562..9b6588e 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -716,6 +716,90 @@
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
+ * of_property_read_string_index - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+int of_property_read_string_index(struct device_node *np, const char *propname,
+ int index, const char **output)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if ((*p != 0) && (i++ == index)) {
+ *output = p;
+ return 0;
+ }
+ }
+ return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(of_property_read_string_index);
+
+
+/**
+ * of_property_count_strings - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+int of_property_count_strings(struct device_node *np, const char *propname)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ int i = 0;
+ size_t l = 0, total = 0;
+ const char *p;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return -EILSEQ;
+
+ p = prop->value;
+
+ for (i = 0; total < prop->length; total += l, p += l) {
+ l = strlen(p) + 1;
+ if (*p != 0)
+ i++;
+ }
+ return i;
+}
+EXPORT_SYMBOL_GPL(of_property_count_strings);
+
+/**
* of_parse_phandle - Resolve a phandle property to a device_node pointer
* @np: Pointer to device node holding phandle property
* @phandle_name: Name of property holding a phandle value
diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 6a5b5e7..6d3dd39 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -19,10 +19,12 @@
*/
#include <linux/errno.h>
+#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/string.h>
+#include <linux/slab.h>
/* For archs that don't support NO_IRQ (such as x86), provide a dummy value */
#ifndef NO_IRQ
@@ -386,3 +388,108 @@
return i;
}
+
+struct intc_desc {
+ struct list_head list;
+ struct device_node *dev;
+ struct device_node *interrupt_parent;
+};
+
+/**
+ * of_irq_init - Scan and init matching interrupt controllers in DT
+ * @matches: 0 terminated array of nodes to match and init function to call
+ *
+ * This function scans the device tree for matching interrupt controller nodes,
+ * and calls their initialization functions in order with parents first.
+ */
+void __init of_irq_init(const struct of_device_id *matches)
+{
+ struct device_node *np, *parent = NULL;
+ struct intc_desc *desc, *temp_desc;
+ struct list_head intc_desc_list, intc_parent_list;
+
+ INIT_LIST_HEAD(&intc_desc_list);
+ INIT_LIST_HEAD(&intc_parent_list);
+
+ for_each_matching_node(np, matches) {
+ if (!of_find_property(np, "interrupt-controller", NULL))
+ continue;
+ /*
+ * Here, we allocate and populate an intc_desc with the node
+ * pointer, interrupt-parent device_node etc.
+ */
+ desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+ if (WARN_ON(!desc))
+ goto err;
+
+ desc->dev = np;
+ desc->interrupt_parent = of_irq_find_parent(np);
+ list_add_tail(&desc->list, &intc_desc_list);
+ }
+
+ /*
+ * The root irq controller is the one without an interrupt-parent.
+ * That one goes first, followed by the controllers that reference it,
+ * followed by the ones that reference the 2nd level controllers, etc.
+ */
+ while (!list_empty(&intc_desc_list)) {
+ /*
+ * Process all controllers with the current 'parent'.
+ * First pass will be looking for NULL as the parent.
+ * The assumption is that NULL parent means a root controller.
+ */
+ list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
+ const struct of_device_id *match;
+ int ret;
+ of_irq_init_cb_t irq_init_cb;
+
+ if (desc->interrupt_parent != parent)
+ continue;
+
+ list_del(&desc->list);
+ match = of_match_node(matches, desc->dev);
+ if (WARN(!match->data,
+ "of_irq_init: no init function for %s\n",
+ match->compatible)) {
+ kfree(desc);
+ continue;
+ }
+
+ pr_debug("of_irq_init: init %s @ %p, parent %p\n",
+ match->compatible,
+ desc->dev, desc->interrupt_parent);
+ irq_init_cb = match->data;
+ ret = irq_init_cb(desc->dev, desc->interrupt_parent);
+ if (ret) {
+ kfree(desc);
+ continue;
+ }
+
+ /*
+ * This one is now set up; add it to the parent list so
+ * its children can get processed in a subsequent pass.
+ */
+ list_add_tail(&desc->list, &intc_parent_list);
+ }
+
+ /* Get the next pending parent that might have children */
+ desc = list_first_entry(&intc_parent_list, typeof(*desc), list);
+ if (list_empty(&intc_parent_list) || !desc) {
+ pr_err("of_irq_init: children remain, but no parents\n");
+ break;
+ }
+ list_del(&desc->list);
+ parent = desc->dev;
+ kfree(desc);
+ }
+
+ list_for_each_entry_safe(desc, temp_desc, &intc_parent_list, list) {
+ list_del(&desc->list);
+ kfree(desc);
+ }
+err:
+ list_for_each_entry_safe(desc, temp_desc, &intc_desc_list, list) {
+ list_del(&desc->list);
+ kfree(desc);
+ }
+}
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index ed5a6d3..cbd5d70 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -310,18 +310,21 @@
struct device_node *np)
{
struct resource res;
- if (lookup) {
- for(; lookup->name != NULL; lookup++) {
- if (!of_device_is_compatible(np, lookup->compatible))
- continue;
- if (of_address_to_resource(np, 0, &res))
- continue;
- if (res.start != lookup->phys_addr)
- continue;
- pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
- return lookup;
- }
+
+ if (!lookup)
+ return NULL;
+
+ for(; lookup->name != NULL; lookup++) {
+ if (!of_device_is_compatible(np, lookup->compatible))
+ continue;
+ if (of_address_to_resource(np, 0, &res))
+ continue;
+ if (res.start != lookup->phys_addr)
+ continue;
+ pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
+ return lookup;
}
+
return NULL;
}
@@ -329,8 +332,9 @@
* of_platform_bus_create() - Create a device for a node and its children.
* @bus: device node of the bus to instantiate
* @matches: match table for bus nodes
- * disallow recursive creation of child buses
+ * @lookup: auxdata table for matching id and platform_data with device nodes
* @parent: parent for new device, or NULL for top level.
+ * @strict: require compatible property
*
* Creates a platform_device for the provided device_node, and optionally
* recursively create devices for all the child nodes.
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index f56d7de7..22a75e6 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -97,7 +97,7 @@
static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
- __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG |
+ __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG +
((state->flags & SS_RESET) ?
BALLOON3_FPGA_SETnCLR : 0));
return 0;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 57de051..9f88641 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -70,6 +70,7 @@
config BATTERY_DS2780
tristate "DS2780 battery driver"
+ depends on HAS_IOMEM
select W1
select W1_SLAVE_DS2780
help
diff --git a/drivers/power/ds2780_battery.c b/drivers/power/ds2780_battery.c
index 1fefe82..91a783d 100644
--- a/drivers/power/ds2780_battery.c
+++ b/drivers/power/ds2780_battery.c
@@ -39,6 +39,7 @@
struct device *dev;
struct power_supply bat;
struct device *w1_dev;
+ struct task_struct *mutex_holder;
};
enum current_types {
@@ -49,8 +50,8 @@
static const char model[] = "DS2780";
static const char manufacturer[] = "Maxim/Dallas";
-static inline struct ds2780_device_info *to_ds2780_device_info(
- struct power_supply *psy)
+static inline struct ds2780_device_info *
+to_ds2780_device_info(struct power_supply *psy)
{
return container_of(psy, struct ds2780_device_info, bat);
}
@@ -60,17 +61,28 @@
return dev_get_drvdata(dev);
}
-static inline int ds2780_read8(struct device *dev, u8 *val, int addr)
+static inline int ds2780_battery_io(struct ds2780_device_info *dev_info,
+ char *buf, int addr, size_t count, int io)
{
- return w1_ds2780_io(dev, val, addr, sizeof(u8), 0);
+ if (dev_info->mutex_holder == current)
+ return w1_ds2780_io_nolock(dev_info->w1_dev, buf, addr, count, io);
+ else
+ return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io);
}
-static int ds2780_read16(struct device *dev, s16 *val, int addr)
+static inline int ds2780_read8(struct ds2780_device_info *dev_info, u8 *val,
+ int addr)
+{
+ return ds2780_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2780_read16(struct ds2780_device_info *dev_info, s16 *val,
+ int addr)
{
int ret;
u8 raw[2];
- ret = w1_ds2780_io(dev, raw, addr, sizeof(u8) * 2, 0);
+ ret = ds2780_battery_io(dev_info, raw, addr, sizeof(raw), 0);
if (ret < 0)
return ret;
@@ -79,16 +91,16 @@
return 0;
}
-static inline int ds2780_read_block(struct device *dev, u8 *val, int addr,
- size_t count)
+static inline int ds2780_read_block(struct ds2780_device_info *dev_info,
+ u8 *val, int addr, size_t count)
{
- return w1_ds2780_io(dev, val, addr, count, 0);
+ return ds2780_battery_io(dev_info, val, addr, count, 0);
}
-static inline int ds2780_write(struct device *dev, u8 *val, int addr,
- size_t count)
+static inline int ds2780_write(struct ds2780_device_info *dev_info, u8 *val,
+ int addr, size_t count)
{
- return w1_ds2780_io(dev, val, addr, count, 1);
+ return ds2780_battery_io(dev_info, val, addr, count, 1);
}
static inline int ds2780_store_eeprom(struct device *dev, int addr)
@@ -122,7 +134,7 @@
{
int ret;
- ret = ds2780_write(dev_info->w1_dev, &conductance,
+ ret = ds2780_write(dev_info, &conductance,
DS2780_RSNSP_REG, sizeof(u8));
if (ret < 0)
return ret;
@@ -134,7 +146,7 @@
static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info,
u16 *rsgain)
{
- return ds2780_read16(dev_info->w1_dev, rsgain, DS2780_RSGAIN_MSB_REG);
+ return ds2780_read16(dev_info, rsgain, DS2780_RSGAIN_MSB_REG);
}
/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
@@ -144,8 +156,8 @@
int ret;
u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
- ret = ds2780_write(dev_info->w1_dev, raw,
- DS2780_RSGAIN_MSB_REG, sizeof(u8) * 2);
+ ret = ds2780_write(dev_info, raw,
+ DS2780_RSGAIN_MSB_REG, sizeof(raw));
if (ret < 0)
return ret;
@@ -167,7 +179,7 @@
* Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
* voltage LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, &voltage_raw,
+ ret = ds2780_read16(dev_info, &voltage_raw,
DS2780_VOLT_MSB_REG);
if (ret < 0)
return ret;
@@ -196,7 +208,7 @@
* Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
* temperature LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, &temperature_raw,
+ ret = ds2780_read16(dev_info, &temperature_raw,
DS2780_TEMP_MSB_REG);
if (ret < 0)
return ret;
@@ -222,13 +234,13 @@
* The units of measurement for current are dependent on the value of
* the sense resistor.
*/
- ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG);
+ ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
if (ret < 0)
return ret;
if (sense_res_raw == 0) {
dev_err(dev_info->dev, "sense resistor value is 0\n");
- return -ENXIO;
+ return -EINVAL;
}
sense_res = 1000 / sense_res_raw;
@@ -248,7 +260,7 @@
* Bits 7 - 0 of the current value are in bits 7 - 0 of the current
* LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, reg_msb);
+ ret = ds2780_read16(dev_info, ¤t_raw, reg_msb);
if (ret < 0)
return ret;
@@ -267,7 +279,7 @@
* The units of measurement for accumulated current are dependent on
* the value of the sense resistor.
*/
- ret = ds2780_read8(dev_info->w1_dev, &sense_res_raw, DS2780_RSNSP_REG);
+ ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
if (ret < 0)
return ret;
@@ -285,7 +297,7 @@
* Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
* LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, ¤t_raw, DS2780_ACR_MSB_REG);
+ ret = ds2780_read16(dev_info, ¤t_raw, DS2780_ACR_MSB_REG);
if (ret < 0)
return ret;
@@ -299,7 +311,7 @@
int ret;
u8 raw;
- ret = ds2780_read8(dev_info->w1_dev, &raw, DS2780_RARC_REG);
+ ret = ds2780_read8(dev_info, &raw, DS2780_RARC_REG);
if (ret < 0)
return ret;
@@ -345,7 +357,7 @@
* Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
* LSB register
*/
- ret = ds2780_read16(dev_info->w1_dev, &charge_raw, DS2780_RAAC_MSB_REG);
+ ret = ds2780_read16(dev_info, &charge_raw, DS2780_RAAC_MSB_REG);
if (ret < 0)
return ret;
@@ -356,7 +368,7 @@
static int ds2780_get_control_register(struct ds2780_device_info *dev_info,
u8 *control_reg)
{
- return ds2780_read8(dev_info->w1_dev, control_reg, DS2780_CONTROL_REG);
+ return ds2780_read8(dev_info, control_reg, DS2780_CONTROL_REG);
}
static int ds2780_set_control_register(struct ds2780_device_info *dev_info,
@@ -364,7 +376,7 @@
{
int ret;
- ret = ds2780_write(dev_info->w1_dev, &control_reg,
+ ret = ds2780_write(dev_info, &control_reg,
DS2780_CONTROL_REG, sizeof(u8));
if (ret < 0)
return ret;
@@ -503,7 +515,7 @@
struct power_supply *psy = to_power_supply(dev);
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
- ret = ds2780_read8(dev_info->w1_dev, &sense_resistor, DS2780_RSNSP_REG);
+ ret = ds2780_read8(dev_info, &sense_resistor, DS2780_RSNSP_REG);
if (ret < 0)
return ret;
@@ -584,7 +596,7 @@
struct power_supply *psy = to_power_supply(dev);
struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
- ret = ds2780_read8(dev_info->w1_dev, &sfr, DS2780_SFR_REG);
+ ret = ds2780_read8(dev_info, &sfr, DS2780_SFR_REG);
if (ret < 0)
return ret;
@@ -611,7 +623,7 @@
return -EINVAL;
}
- ret = ds2780_write(dev_info->w1_dev, &new_setting,
+ ret = ds2780_write(dev_info, &new_setting,
DS2780_SFR_REG, sizeof(u8));
if (ret < 0)
return ret;
@@ -632,7 +644,7 @@
DS2780_EEPROM_BLOCK1_END -
DS2780_EEPROM_BLOCK1_START + 1 - off);
- return ds2780_read_block(dev_info->w1_dev, buf,
+ return ds2780_read_block(dev_info, buf,
DS2780_EEPROM_BLOCK1_START + off, count);
}
@@ -650,7 +662,7 @@
DS2780_EEPROM_BLOCK1_END -
DS2780_EEPROM_BLOCK1_START + 1 - off);
- ret = ds2780_write(dev_info->w1_dev, buf,
+ ret = ds2780_write(dev_info, buf,
DS2780_EEPROM_BLOCK1_START + off, count);
if (ret < 0)
return ret;
@@ -685,9 +697,8 @@
DS2780_EEPROM_BLOCK0_END -
DS2780_EEPROM_BLOCK0_START + 1 - off);
- return ds2780_read_block(dev_info->w1_dev, buf,
+ return ds2780_read_block(dev_info, buf,
DS2780_EEPROM_BLOCK0_START + off, count);
-
}
static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
@@ -704,7 +715,7 @@
DS2780_EEPROM_BLOCK0_END -
DS2780_EEPROM_BLOCK0_START + 1 - off);
- ret = ds2780_write(dev_info->w1_dev, buf,
+ ret = ds2780_write(dev_info, buf,
DS2780_EEPROM_BLOCK0_START + off, count);
if (ret < 0)
return ret;
@@ -768,6 +779,7 @@
dev_info->bat.properties = ds2780_battery_props;
dev_info->bat.num_properties = ARRAY_SIZE(ds2780_battery_props);
dev_info->bat.get_property = ds2780_battery_get_property;
+ dev_info->mutex_holder = current;
ret = power_supply_register(&pdev->dev, &dev_info->bat);
if (ret) {
@@ -797,6 +809,8 @@
goto fail_remove_bin_file;
}
+ dev_info->mutex_holder = NULL;
+
return 0;
fail_remove_bin_file:
@@ -816,6 +830,8 @@
{
struct ds2780_device_info *dev_info = platform_get_drvdata(pdev);
+ dev_info->mutex_holder = current;
+
/* remove attributes */
sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
diff --git a/drivers/pps/clients/Kconfig b/drivers/pps/clients/Kconfig
index 8520a7f..445197d 100644
--- a/drivers/pps/clients/Kconfig
+++ b/drivers/pps/clients/Kconfig
@@ -29,4 +29,13 @@
If you say yes here you get support for a PPS source connected
with the interrupt pin of your parallel port.
+config PPS_CLIENT_GPIO
+ tristate "PPS client using GPIO"
+ depends on PPS && GENERIC_HARDIRQS
+ help
+ If you say yes here you get support for a PPS source using
+ GPIO. To be useful you must also register a platform device
+ specifying the GPIO pin and other options, usually in your board
+ setup.
+
endif
diff --git a/drivers/pps/clients/Makefile b/drivers/pps/clients/Makefile
index 4feb7e9..a461d15 100644
--- a/drivers/pps/clients/Makefile
+++ b/drivers/pps/clients/Makefile
@@ -5,5 +5,6 @@
obj-$(CONFIG_PPS_CLIENT_KTIMER) += pps-ktimer.o
obj-$(CONFIG_PPS_CLIENT_LDISC) += pps-ldisc.o
obj-$(CONFIG_PPS_CLIENT_PARPORT) += pps_parport.o
+obj-$(CONFIG_PPS_CLIENT_GPIO) += pps-gpio.o
ccflags-$(CONFIG_PPS_DEBUG) := -DDEBUG
diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
new file mode 100644
index 0000000..6550555
--- /dev/null
+++ b/drivers/pps/clients/pps-gpio.c
@@ -0,0 +1,227 @@
+/*
+ * pps-gpio.c -- PPS client driver using GPIO
+ *
+ *
+ * Copyright (C) 2010 Ricardo Martins <rasm@fe.up.pt>
+ * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define PPS_GPIO_NAME "pps-gpio"
+#define pr_fmt(fmt) PPS_GPIO_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pps_kernel.h>
+#include <linux/pps-gpio.h>
+#include <linux/gpio.h>
+#include <linux/list.h>
+
+/* Info for each registered platform device */
+struct pps_gpio_device_data {
+ int irq; /* IRQ used as PPS source */
+ struct pps_device *pps; /* PPS source device */
+ struct pps_source_info info; /* PPS source information */
+ const struct pps_gpio_platform_data *pdata;
+};
+
+/*
+ * Report the PPS event
+ */
+
+static irqreturn_t pps_gpio_irq_handler(int irq, void *data)
+{
+ const struct pps_gpio_device_data *info;
+ struct pps_event_time ts;
+ int rising_edge;
+
+ /* Get the time stamp first */
+ pps_get_ts(&ts);
+
+ info = data;
+
+ rising_edge = gpio_get_value(info->pdata->gpio_pin);
+ if ((rising_edge && !info->pdata->assert_falling_edge) ||
+ (!rising_edge && info->pdata->assert_falling_edge))
+ pps_event(info->pps, &ts, PPS_CAPTUREASSERT, NULL);
+ else if (info->pdata->capture_clear &&
+ ((rising_edge && info->pdata->assert_falling_edge) ||
+ (!rising_edge && !info->pdata->assert_falling_edge)))
+ pps_event(info->pps, &ts, PPS_CAPTURECLEAR, NULL);
+
+ return IRQ_HANDLED;
+}
+
+static int pps_gpio_setup(struct platform_device *pdev)
+{
+ int ret;
+ const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+ ret = gpio_request(pdata->gpio_pin, pdata->gpio_label);
+ if (ret) {
+ pr_warning("failed to request GPIO %u\n", pdata->gpio_pin);
+ return -EINVAL;
+ }
+
+ ret = gpio_direction_input(pdata->gpio_pin);
+ if (ret) {
+ pr_warning("failed to set pin direction\n");
+ gpio_free(pdata->gpio_pin);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long
+get_irqf_trigger_flags(const struct pps_gpio_platform_data *pdata)
+{
+ unsigned long flags = pdata->assert_falling_edge ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
+
+ if (pdata->capture_clear) {
+ flags |= ((flags & IRQF_TRIGGER_RISING) ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING);
+ }
+
+ return flags;
+}
+
+static int pps_gpio_probe(struct platform_device *pdev)
+{
+ struct pps_gpio_device_data *data;
+ int irq;
+ int ret;
+ int err;
+ int pps_default_params;
+ const struct pps_gpio_platform_data *pdata = pdev->dev.platform_data;
+
+
+ /* GPIO setup */
+ ret = pps_gpio_setup(pdev);
+ if (ret)
+ return -EINVAL;
+
+ /* IRQ setup */
+ irq = gpio_to_irq(pdata->gpio_pin);
+ if (irq < 0) {
+ pr_err("failed to map GPIO to IRQ: %d\n", irq);
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ /* allocate space for device info */
+ data = kzalloc(sizeof(struct pps_gpio_device_data), GFP_KERNEL);
+ if (data == NULL) {
+ err = -ENOMEM;
+ goto return_error;
+ }
+
+ /* initialize PPS specific parts of the bookkeeping data structure. */
+ data->info.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
+ PPS_ECHOASSERT | PPS_CANWAIT | PPS_TSFMT_TSPEC;
+ if (pdata->capture_clear)
+ data->info.mode |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR |
+ PPS_ECHOCLEAR;
+ data->info.owner = THIS_MODULE;
+ snprintf(data->info.name, PPS_MAX_NAME_LEN - 1, "%s.%d",
+ pdev->name, pdev->id);
+
+ /* register PPS source */
+ pps_default_params = PPS_CAPTUREASSERT | PPS_OFFSETASSERT;
+ if (pdata->capture_clear)
+ pps_default_params |= PPS_CAPTURECLEAR | PPS_OFFSETCLEAR;
+ data->pps = pps_register_source(&data->info, pps_default_params);
+ if (data->pps == NULL) {
+ kfree(data);
+ pr_err("failed to register IRQ %d as PPS source\n", irq);
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ data->irq = irq;
+ data->pdata = pdata;
+
+ /* register IRQ interrupt handler */
+ ret = request_irq(irq, pps_gpio_irq_handler,
+ get_irqf_trigger_flags(pdata), data->info.name, data);
+ if (ret) {
+ pps_unregister_source(data->pps);
+ kfree(data);
+ pr_err("failed to acquire IRQ %d\n", irq);
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ platform_set_drvdata(pdev, data);
+ dev_info(data->pps->dev, "Registered IRQ %d as PPS source\n", irq);
+
+ return 0;
+
+return_error:
+ gpio_free(pdata->gpio_pin);
+ return err;
+}
+
+static int pps_gpio_remove(struct platform_device *pdev)
+{
+ struct pps_gpio_device_data *data = platform_get_drvdata(pdev);
+ const struct pps_gpio_platform_data *pdata = data->pdata;
+
+ platform_set_drvdata(pdev, NULL);
+ free_irq(data->irq, data);
+ gpio_free(pdata->gpio_pin);
+ pps_unregister_source(data->pps);
+ pr_info("removed IRQ %d as PPS source\n", data->irq);
+ kfree(data);
+ return 0;
+}
+
+static struct platform_driver pps_gpio_driver = {
+ .probe = pps_gpio_probe,
+ .remove = __devexit_p(pps_gpio_remove),
+ .driver = {
+ .name = PPS_GPIO_NAME,
+ .owner = THIS_MODULE
+ },
+};
+
+static int __init pps_gpio_init(void)
+{
+ int ret = platform_driver_register(&pps_gpio_driver);
+ if (ret < 0)
+ pr_err("failed to register platform driver\n");
+ return ret;
+}
+
+static void __exit pps_gpio_exit(void)
+{
+ platform_driver_unregister(&pps_gpio_driver);
+ pr_debug("unregistered platform driver\n");
+}
+
+module_init(pps_gpio_init);
+module_exit(pps_gpio_exit);
+
+MODULE_AUTHOR("Ricardo Martins <rasm@fe.up.pt>");
+MODULE_AUTHOR("James Nuss <jamesnuss@nanometrics.ca>");
+MODULE_DESCRIPTION("Use GPIO pin as PPS source");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0.0");
diff --git a/drivers/pps/clients/pps-ktimer.c b/drivers/pps/clients/pps-ktimer.c
index 82583b0..436b4e4 100644
--- a/drivers/pps/clients/pps-ktimer.c
+++ b/drivers/pps/clients/pps-ktimer.c
@@ -52,17 +52,6 @@
}
/*
- * The echo function
- */
-
-static void pps_ktimer_echo(struct pps_device *pps, int event, void *data)
-{
- dev_info(pps->dev, "echo %s %s\n",
- event & PPS_CAPTUREASSERT ? "assert" : "",
- event & PPS_CAPTURECLEAR ? "clear" : "");
-}
-
-/*
* The PPS info struct
*/
@@ -72,7 +61,6 @@
.mode = PPS_CAPTUREASSERT | PPS_OFFSETASSERT |
PPS_ECHOASSERT |
PPS_CANWAIT | PPS_TSFMT_TSPEC,
- .echo = pps_ktimer_echo,
.owner = THIS_MODULE,
};
diff --git a/drivers/pps/clients/pps_parport.c b/drivers/pps/clients/pps_parport.c
index c571d6d..e1b4705 100644
--- a/drivers/pps/clients/pps_parport.c
+++ b/drivers/pps/clients/pps_parport.c
@@ -133,14 +133,6 @@
return;
}
-/* the PPS echo function */
-static void pps_echo(struct pps_device *pps, int event, void *data)
-{
- dev_info(pps->dev, "echo %s %s\n",
- event & PPS_CAPTUREASSERT ? "assert" : "",
- event & PPS_CAPTURECLEAR ? "clear" : "");
-}
-
static void parport_attach(struct parport *port)
{
struct pps_client_pp *device;
@@ -151,7 +143,6 @@
PPS_OFFSETASSERT | PPS_OFFSETCLEAR | \
PPS_ECHOASSERT | PPS_ECHOCLEAR | \
PPS_CANWAIT | PPS_TSFMT_TSPEC,
- .echo = pps_echo,
.owner = THIS_MODULE,
.dev = NULL
};
diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c
index a4e8eb9..f197e8e 100644
--- a/drivers/pps/kapi.c
+++ b/drivers/pps/kapi.c
@@ -52,6 +52,14 @@
ts->sec += offset->sec;
}
+static void pps_echo_client_default(struct pps_device *pps, int event,
+ void *data)
+{
+ dev_info(pps->dev, "echo %s %s\n",
+ event & PPS_CAPTUREASSERT ? "assert" : "",
+ event & PPS_CAPTURECLEAR ? "clear" : "");
+}
+
/*
* Exported functions
*/
@@ -80,13 +88,6 @@
err = -EINVAL;
goto pps_register_source_exit;
}
- if ((info->mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) != 0 &&
- info->echo == NULL) {
- pr_err("%s: echo function is not defined\n",
- info->name);
- err = -EINVAL;
- goto pps_register_source_exit;
- }
if ((info->mode & (PPS_TSFMT_TSPEC | PPS_TSFMT_NTPFP)) == 0) {
pr_err("%s: unspecified time format\n",
info->name);
@@ -108,6 +109,11 @@
pps->params.mode = default_params;
pps->info = *info;
+ /* check for default echo function */
+ if ((pps->info.mode & (PPS_ECHOASSERT | PPS_ECHOCLEAR)) &&
+ pps->info.echo == NULL)
+ pps->info.echo = pps_echo_client_default;
+
init_waitqueue_head(&pps->queue);
spin_lock_init(&pps->lock);
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index 070211a..bc87192 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -1,6 +1,8 @@
#
# RapidIO configuration
#
+source "drivers/rapidio/devices/Kconfig"
+
config RAPIDIO_DISC_TIMEOUT
int "Discovery timeout duration (seconds)"
depends on RAPIDIO
@@ -20,8 +22,6 @@
ports for Input/Output direction to allow other traffic
than Maintenance transfers.
-source "drivers/rapidio/switches/Kconfig"
-
config RAPIDIO_DEBUG
bool "RapidIO subsystem debug messages"
depends on RAPIDIO
@@ -32,3 +32,5 @@
going on.
If you are unsure about this, say N here.
+
+source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
index 89b8eca..ec3fb81 100644
--- a/drivers/rapidio/Makefile
+++ b/drivers/rapidio/Makefile
@@ -4,5 +4,6 @@
obj-y += rio.o rio-access.o rio-driver.o rio-scan.o rio-sysfs.o
obj-$(CONFIG_RAPIDIO) += switches/
+obj-$(CONFIG_RAPIDIO) += devices/
subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG
diff --git a/drivers/rapidio/devices/Kconfig b/drivers/rapidio/devices/Kconfig
new file mode 100644
index 0000000..12a9d7f
--- /dev/null
+++ b/drivers/rapidio/devices/Kconfig
@@ -0,0 +1,10 @@
+#
+# RapidIO master port configuration
+#
+
+config RAPIDIO_TSI721
+ bool "IDT Tsi721 PCI Express SRIO Controller support"
+ depends on RAPIDIO && PCIEPORTBUS
+ default "n"
+ ---help---
+ Include support for IDT Tsi721 PCI Express Serial RapidIO controller.
diff --git a/drivers/rapidio/devices/Makefile b/drivers/rapidio/devices/Makefile
new file mode 100644
index 0000000..3b7b4e2
--- /dev/null
+++ b/drivers/rapidio/devices/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for RapidIO devices
+#
+
+obj-$(CONFIG_RAPIDIO_TSI721) += tsi721.o
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
new file mode 100644
index 0000000..5225930
--- /dev/null
+++ b/drivers/rapidio/devices/tsi721.c
@@ -0,0 +1,2360 @@
+/*
+ * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
+ *
+ * Copyright 2011 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * Chul Kim <chul.kim@idt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+
+#include "tsi721.h"
+
+#define DEBUG_PW /* Inbound Port-Write debugging */
+
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
+
+/**
+ * tsi721_lcread - read from local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a local SREP space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ *data = ioread32(priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_lcwrite - write into local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a local write into SREP configuration space. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ iowrite32(data, priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_maint_dma - Helper function to generate RapidIO maintenance
+ * transactions using designated Tsi721 DMA channel.
+ * @priv: pointer to tsi721 private data
+ * @sys_size: RapdiIO transport system size
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Location to be read from or write into
+ * @do_wr: Operation flag (1 == MAINT_WR)
+ *
+ * Generates a RapidIO maintenance transaction (Read or Write).
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
+ u16 destid, u8 hopcount, u32 offset, int len,
+ u32 *data, int do_wr)
+{
+ struct tsi721_dma_desc *bd_ptr;
+ u32 rd_count, swr_ptr, ch_stat;
+ int i, err = 0;
+ u32 op = do_wr ? MAINT_WR : MAINT_RD;
+
+ if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
+ return -EINVAL;
+
+ bd_ptr = priv->bdma[TSI721_DMACH_MAINT].bd_base;
+
+ rd_count = ioread32(
+ priv->regs + TSI721_DMAC_DRDCNT(TSI721_DMACH_MAINT));
+
+ /* Initialize DMA descriptor */
+ bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
+ bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
+ bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
+ bd_ptr[0].raddr_hi = 0;
+ if (do_wr)
+ bd_ptr[0].data[0] = cpu_to_be32p(data);
+ else
+ bd_ptr[0].data[0] = 0xffffffff;
+
+ mb();
+
+ /* Start DMA operation */
+ iowrite32(rd_count + 2,
+ priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
+ ioread32(priv->regs + TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
+ i = 0;
+
+ /* Wait until DMA transfer is finished */
+ while ((ch_stat = ioread32(priv->regs +
+ TSI721_DMAC_STS(TSI721_DMACH_MAINT))) & TSI721_DMAC_STS_RUN) {
+ udelay(1);
+ if (++i >= 5000000) {
+ dev_dbg(&priv->pdev->dev,
+ "%s : DMA[%d] read timeout ch_status=%x\n",
+ __func__, TSI721_DMACH_MAINT, ch_stat);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+ }
+
+ if (ch_stat & TSI721_DMAC_STS_ABORT) {
+ /* If DMA operation aborted due to error,
+ * reinitialize DMA channel
+ */
+ dev_dbg(&priv->pdev->dev, "%s : DMA ABORT ch_stat=%x\n",
+ __func__, ch_stat);
+ dev_dbg(&priv->pdev->dev, "OP=%d : destid=%x hc=%x off=%x\n",
+ do_wr ? MAINT_WR : MAINT_RD, destid, hopcount, offset);
+ iowrite32(TSI721_DMAC_INT_ALL,
+ priv->regs + TSI721_DMAC_INT(TSI721_DMACH_MAINT));
+ iowrite32(TSI721_DMAC_CTL_INIT,
+ priv->regs + TSI721_DMAC_CTL(TSI721_DMACH_MAINT));
+ udelay(10);
+ iowrite32(0, priv->regs +
+ TSI721_DMAC_DWRCNT(TSI721_DMACH_MAINT));
+ udelay(1);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+
+ if (!do_wr)
+ *data = be32_to_cpu(bd_ptr[0].data[0]);
+
+ /*
+ * Update descriptor status FIFO RD pointer.
+ * NOTE: Skipping check and clear FIFO entries because we are waiting
+ * for transfer to be completed.
+ */
+ swr_ptr = ioread32(priv->regs + TSI721_DMAC_DSWP(TSI721_DMACH_MAINT));
+ iowrite32(swr_ptr, priv->regs + TSI721_DMAC_DSRP(TSI721_DMACH_MAINT));
+err_out:
+
+ return err;
+}
+
+/**
+ * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
+ * using Tsi721 BDMA engine.
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a RapidIO maintenance read transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, data, 0);
+}
+
+/**
+ * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
+ * using Tsi721 BDMA engine
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates a RapidIO maintenance write transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 temp = data;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, &temp, 1);
+}
+
+/**
+ * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
+ * @mport: RapidIO master port structure
+ *
+ * Handles inbound port-write interrupts. Copies PW message from an internal
+ * buffer into PW message FIFO and schedules deferred routine to process
+ * queued messages.
+ */
+static int
+tsi721_pw_handler(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 pw_stat;
+ u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
+
+
+ pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
+ pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
+ pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
+ pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
+ pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
+
+ /* Queue PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ spin_lock(&priv->pw_fifo_lock);
+ if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
+ kfifo_in(&priv->pw_fifo, pw_buf,
+ TSI721_RIO_PW_MSG_SIZE);
+ else
+ priv->pw_discard_count++;
+ spin_unlock(&priv->pw_fifo_lock);
+ }
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ schedule_work(&priv->pw_work);
+
+ return 0;
+}
+
+static void tsi721_pw_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ pw_work);
+ u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; /* Use full size PW message
+ buffer for RIO layer */
+
+ /*
+ * Process port-write messages
+ */
+ while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)msg_buffer,
+ TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
+ /* Process one message */
+#ifdef DEBUG_PW
+ {
+ u32 i;
+ pr_debug("%s : Port-Write Message:", __func__);
+ for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); ) {
+ pr_debug("0x%02x: %08x %08x %08x %08x", i*4,
+ msg_buffer[i], msg_buffer[i + 1],
+ msg_buffer[i + 2], msg_buffer[i + 3]);
+ i += 4;
+ }
+ pr_debug("\n");
+ }
+#endif
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+ }
+}
+
+/**
+ * tsi721_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+static int tsi721_pw_enable(struct rio_mport *mport, int enable)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rval;
+
+ rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ if (enable)
+ rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
+ else
+ rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+ /* Update enable bits */
+ iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ return 0;
+}
+
+/**
+ * tsi721_dsend - Send a RapidIO doorbell
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell
+ *
+ * Sends a RapidIO doorbell message. Always returns %0.
+ */
+static int tsi721_dsend(struct rio_mport *mport, int index,
+ u16 destid, u16 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 offset;
+
+ offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
+ (destid << 2);
+
+ dev_dbg(&priv->pdev->dev,
+ "Send Doorbell 0x%04x to destID 0x%x\n", data, destid);
+ iowrite16be(data, priv->odb_base + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
+ * @mport: RapidIO master port structure
+ *
+ * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
+ * buffer into DB message FIFO and schedules deferred routine to process
+ * queued DBs.
+ */
+static int
+tsi721_dbell_handler(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 regval;
+
+ /* Disable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval &= ~TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ schedule_work(&priv->idb_work);
+
+ return 0;
+}
+
+static void tsi721_db_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ idb_work);
+ struct rio_mport *mport;
+ struct rio_dbell *dbell;
+ int found = 0;
+ u32 wr_ptr, rd_ptr;
+ u64 *idb_entry;
+ u32 regval;
+ union {
+ u64 msg;
+ u8 bytes[8];
+ } idb;
+
+ /*
+ * Process queued inbound doorbells
+ */
+ mport = priv->mport;
+
+ wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE));
+ rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ while (wr_ptr != rd_ptr) {
+ idb_entry = (u64 *)(priv->idb_base +
+ (TSI721_IDB_ENTRY_SIZE * rd_ptr));
+ rd_ptr++;
+ idb.msg = *idb_entry;
+ *idb_entry = 0;
+
+ /* Process one doorbell */
+ list_for_each_entry(dbell, &mport->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
+ (dbell->res->end >= DBELL_INF(idb.bytes))) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
+ DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+ } else {
+ dev_dbg(&priv->pdev->dev,
+ "spurious inb doorbell, sid %2.2x tid %2.2x"
+ " info %4.4x\n", DBELL_SID(idb.bytes),
+ DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+ }
+ }
+
+ iowrite32(rd_ptr & (IDB_QSIZE - 1),
+ priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ /* Re-enable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval |= TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+}
+
+/**
+ * tsi721_irqhandler - Tsi721 interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
+ * interrupt events and calls an event-specific handler(s).
+ */
+static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
+{
+ struct rio_mport *mport = (struct rio_mport *)ptr;
+ struct tsi721_device *priv = mport->priv;
+ u32 dev_int;
+ u32 dev_ch_int;
+ u32 intval;
+ u32 ch_inte;
+
+ dev_int = ioread32(priv->regs + TSI721_DEV_INT);
+ if (!dev_int)
+ return IRQ_NONE;
+
+ dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
+
+ if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
+ /* Service SR2PC Channel interrupts */
+ if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
+ /* Service Inbound Doorbell interrupt */
+ intval = ioread32(priv->regs +
+ TSI721_SR_CHINT(IDB_QUEUE));
+ if (intval & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler(mport);
+ else
+ dev_info(&priv->pdev->dev,
+ "Unsupported SR_CH_INT %x\n", intval);
+
+ /* Clear interrupts */
+ iowrite32(intval,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SMSG_CH) {
+ int ch;
+
+ /*
+ * Service channel interrupts from Messaging Engine
+ */
+
+ if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Inbound Message interrupt for each MBOX
+ */
+ for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
+ if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
+ continue;
+ tsi721_imsg_handler(priv, ch);
+ }
+ }
+
+ if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Outbound Message interrupts for each MBOX
+ */
+
+ for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
+ if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
+ continue;
+ tsi721_omsg_handler(priv, ch);
+ }
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SRIO) {
+ /* Service SRIO MAC interrupts */
+ intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler(mport);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void tsi721_interrupts_init(struct tsi721_device *priv)
+{
+ u32 intr;
+
+ /* Enable IDB interrupts */
+ iowrite32(TSI721_SR_CHINT_ALL,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ iowrite32(TSI721_SR_CHINT_IDBQRCV,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ iowrite32(TSI721_INT_SR2PC_CHAN(IDB_QUEUE),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /* Enable SRIO MAC interrupts */
+ iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
+ priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+
+ if (priv->flags & TSI721_USING_MSIX)
+ intr = TSI721_DEV_INT_SRIO;
+ else
+ intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+ TSI721_DEV_INT_SMSG_CH;
+
+ iowrite32(intr, priv->regs + TSI721_DEV_INTE);
+ ioread32(priv->regs + TSI721_DEV_INTE);
+}
+
+#ifdef CONFIG_PCI_MSI
+/**
+ * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles outbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
+ tsi721_omsg_handler(priv, mbox);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles inbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
+ tsi721_imsg_handler(priv, mbox + 4);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts from SRIO MAC.
+ */
+static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ u32 srio_int;
+
+ /* Service SRIO MAC interrupts */
+ srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler((struct rio_mport *)ptr);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (mport structure)
+ *
+ * Handles Tsi721 interrupts from SR2PC Channel.
+ * NOTE: At this moment services only one SR2PC channel associated with inbound
+ * doorbells.
+ */
+static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = ((struct rio_mport *)ptr)->priv;
+ u32 sr_ch_int;
+
+ /* Service Inbound DB interrupt from SR2PC channel */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler((struct rio_mport *)ptr);
+
+ /* Clear interrupts */
+ iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ /* Read back to ensure that interrupt was cleared */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_request_msix - register interrupt service for MSI-X mode.
+ * @mport: RapidIO master port structure
+ *
+ * Registers MSI-X interrupt service routines for interrupts that are active
+ * immediately after mport initialization. Messaging interrupt service routines
+ * should be registered during corresponding open requests.
+ */
+static int tsi721_request_msix(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ int err = 0;
+
+ err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
+ tsi721_sr2pc_ch_msix, 0,
+ priv->msix[TSI721_VECT_IDB].irq_name, (void *)mport);
+ if (err)
+ goto out;
+
+ err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
+ tsi721_srio_msix, 0,
+ priv->msix[TSI721_VECT_PWRX].irq_name, (void *)mport);
+ if (err)
+ free_irq(
+ priv->msix[TSI721_VECT_IDB].vector,
+ (void *)mport);
+out:
+ return err;
+}
+
+/**
+ * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures MSI-X support for Tsi721. Supports only an exact number
+ * of requested vectors.
+ */
+static int tsi721_enable_msix(struct tsi721_device *priv)
+{
+ struct msix_entry entries[TSI721_VECT_MAX];
+ int err;
+ int i;
+
+ entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
+ entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
+
+ /*
+ * Initialize MSI-X entries for Messaging Engine:
+ * this driver supports four RIO mailboxes (inbound and outbound)
+ * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
+ * offset +4 is added to IB MBOX number.
+ */
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ entries[TSI721_VECT_IMB0_RCV + i].entry =
+ TSI721_MSIX_IMSG_DQ_RCV(i + 4);
+ entries[TSI721_VECT_IMB0_INT + i].entry =
+ TSI721_MSIX_IMSG_INT(i + 4);
+ entries[TSI721_VECT_OMB0_DONE + i].entry =
+ TSI721_MSIX_OMSG_DONE(i);
+ entries[TSI721_VECT_OMB0_INT + i].entry =
+ TSI721_MSIX_OMSG_INT(i);
+ }
+
+ err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries));
+ if (err) {
+ if (err > 0)
+ dev_info(&priv->pdev->dev,
+ "Only %d MSI-X vectors available, "
+ "not using MSI-X\n", err);
+ return err;
+ }
+
+ /*
+ * Copy MSI-X vector information into tsi721 private structure
+ */
+ priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
+ snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
+ priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
+ snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
+
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
+ entries[TSI721_VECT_IMB0_RCV + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_IMB0_INT + i].vector =
+ entries[TSI721_VECT_IMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
+ entries[TSI721_VECT_OMB0_DONE + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_INT + i].vector =
+ entries[TSI721_VECT_OMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
+ i, pci_name(priv->pdev));
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int tsi721_request_irq(struct rio_mport *mport)
+{
+ struct tsi721_device *priv = mport->priv;
+ int err;
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX)
+ err = tsi721_request_msix(mport);
+ else
+#endif
+ err = request_irq(priv->pdev->irq, tsi721_irqhandler,
+ (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
+ DRV_NAME, (void *)mport);
+
+ if (err)
+ dev_err(&priv->pdev->dev,
+ "Unable to allocate interrupt, Error: %d\n", err);
+
+ return err;
+}
+
+/**
+ * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables SREP translation regions.
+ */
+static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
+{
+ int i;
+
+ /* Disable all PC2SR translation windows */
+ for (i = 0; i < TSI721_OBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_OBWINLB(i));
+}
+
+/**
+ * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables inbound windows.
+ */
+static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
+{
+ int i;
+
+ /* Disable all SR2PC inbound windows */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_IBWINLB(i));
+}
+
+/**
+ * tsi721_port_write_init - Inbound port write interface init
+ * @priv: pointer to tsi721 private data
+ *
+ * Initializes inbound port write handler.
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_port_write_init(struct tsi721_device *priv)
+{
+ priv->pw_discard_count = 0;
+ INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
+ spin_lock_init(&priv->pw_fifo_lock);
+ if (kfifo_alloc(&priv->pw_fifo,
+ TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ dev_err(&priv->pdev->dev, "PW FIFO allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* Use reliable port-write capture mode */
+ iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
+ return 0;
+}
+
+static int tsi721_doorbell_init(struct tsi721_device *priv)
+{
+ /* Outbound Doorbells do not require any setup.
+ * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
+ * That BAR1 was mapped during the probe routine.
+ */
+
+ /* Initialize Inbound Doorbell processing DPC and queue */
+ priv->db_discard_count = 0;
+ INIT_WORK(&priv->idb_work, tsi721_db_dpc);
+
+ /* Allocate buffer for inbound doorbells queue */
+ priv->idb_base = dma_alloc_coherent(&priv->pdev->dev,
+ IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ &priv->idb_dma, GFP_KERNEL);
+ if (!priv->idb_base)
+ return -ENOMEM;
+
+ memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE);
+
+ dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n",
+ priv->idb_base, (unsigned long long)priv->idb_dma);
+
+ iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
+ priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma >> 32),
+ priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
+ priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
+ /* Enable accepting all inbound doorbells */
+ iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
+
+ iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
+
+ iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ return 0;
+}
+
+static void tsi721_doorbell_free(struct tsi721_device *priv)
+{
+ if (priv->idb_base == NULL)
+ return;
+
+ /* Free buffer allocated for inbound doorbell queue */
+ dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ priv->idb_base, priv->idb_dma);
+ priv->idb_base = NULL;
+}
+
+static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum)
+{
+ struct tsi721_dma_desc *bd_ptr;
+ u64 *sts_ptr;
+ dma_addr_t bd_phys, sts_phys;
+ int sts_size;
+ int bd_num = priv->bdma[chnum].bd_num;
+
+ dev_dbg(&priv->pdev->dev, "Init Block DMA Engine, CH%d\n", chnum);
+
+ /*
+ * Initialize DMA channel for maintenance requests
+ */
+
+ /* Allocate space for DMA descriptors */
+ bd_ptr = dma_alloc_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ &bd_phys, GFP_KERNEL);
+ if (!bd_ptr)
+ return -ENOMEM;
+
+ priv->bdma[chnum].bd_phys = bd_phys;
+ priv->bdma[chnum].bd_base = bd_ptr;
+
+ memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc));
+
+ dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n",
+ bd_ptr, (unsigned long long)bd_phys);
+
+ /* Allocate space for descriptor status FIFO */
+ sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
+ bd_num : TSI721_DMA_MINSTSSZ;
+ sts_size = roundup_pow_of_two(sts_size);
+ sts_ptr = dma_alloc_coherent(&priv->pdev->dev,
+ sts_size * sizeof(struct tsi721_dma_sts),
+ &sts_phys, GFP_KERNEL);
+ if (!sts_ptr) {
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ bd_ptr, bd_phys);
+ priv->bdma[chnum].bd_base = NULL;
+ return -ENOMEM;
+ }
+
+ priv->bdma[chnum].sts_phys = sts_phys;
+ priv->bdma[chnum].sts_base = sts_ptr;
+ priv->bdma[chnum].sts_size = sts_size;
+
+ memset(sts_ptr, 0, sts_size);
+
+ dev_dbg(&priv->pdev->dev,
+ "desc status FIFO @ %p (phys = %llx) size=0x%x\n",
+ sts_ptr, (unsigned long long)sts_phys, sts_size);
+
+ /* Initialize DMA descriptors ring */
+ bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
+ bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
+ TSI721_DMAC_DPTRL_MASK);
+ bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
+
+ /* Setup DMA descriptor pointers */
+ iowrite32(((u64)bd_phys >> 32),
+ priv->regs + TSI721_DMAC_DPTRH(chnum));
+ iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
+ priv->regs + TSI721_DMAC_DPTRL(chnum));
+
+ /* Setup descriptor status FIFO */
+ iowrite32(((u64)sts_phys >> 32),
+ priv->regs + TSI721_DMAC_DSBH(chnum));
+ iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
+ priv->regs + TSI721_DMAC_DSBL(chnum));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
+ priv->regs + TSI721_DMAC_DSSZ(chnum));
+
+ /* Clear interrupt bits */
+ iowrite32(TSI721_DMAC_INT_ALL,
+ priv->regs + TSI721_DMAC_INT(chnum));
+
+ ioread32(priv->regs + TSI721_DMAC_INT(chnum));
+
+ /* Toggle DMA channel initialization */
+ iowrite32(TSI721_DMAC_CTL_INIT, priv->regs + TSI721_DMAC_CTL(chnum));
+ ioread32(priv->regs + TSI721_DMAC_CTL(chnum));
+ udelay(10);
+
+ return 0;
+}
+
+static int tsi721_bdma_ch_free(struct tsi721_device *priv, int chnum)
+{
+ u32 ch_stat;
+
+ if (priv->bdma[chnum].bd_base == NULL)
+ return 0;
+
+ /* Check if DMA channel still running */
+ ch_stat = ioread32(priv->regs + TSI721_DMAC_STS(chnum));
+ if (ch_stat & TSI721_DMAC_STS_RUN)
+ return -EFAULT;
+
+ /* Put DMA channel into init state */
+ iowrite32(TSI721_DMAC_CTL_INIT,
+ priv->regs + TSI721_DMAC_CTL(chnum));
+
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->bdma[chnum].bd_num * sizeof(struct tsi721_dma_desc),
+ priv->bdma[chnum].bd_base, priv->bdma[chnum].bd_phys);
+ priv->bdma[chnum].bd_base = NULL;
+
+ /* Free space allocated for status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->bdma[chnum].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->bdma[chnum].sts_base, priv->bdma[chnum].sts_phys);
+ priv->bdma[chnum].sts_base = NULL;
+ return 0;
+}
+
+static int tsi721_bdma_init(struct tsi721_device *priv)
+{
+ /* Initialize BDMA channel allocated for RapidIO maintenance read/write
+ * request generation
+ */
+ priv->bdma[TSI721_DMACH_MAINT].bd_num = 2;
+ if (tsi721_bdma_ch_init(priv, TSI721_DMACH_MAINT)) {
+ dev_err(&priv->pdev->dev, "Unable to initialize maintenance DMA"
+ " channel %d, aborting\n", TSI721_DMACH_MAINT);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void tsi721_bdma_free(struct tsi721_device *priv)
+{
+ tsi721_bdma_ch_free(priv, TSI721_DMACH_MAINT);
+}
+
+/* Enable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Enable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Disable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Enable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Enable Outbound Messaging channel interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Disable Outbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/**
+ * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ */
+static int
+tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *desc;
+ u32 tx_slot;
+
+ if (!priv->omsg_init[mbox] ||
+ len > TSI721_MSG_MAX_SIZE || len < 8)
+ return -EINVAL;
+
+ tx_slot = priv->omsg_ring[mbox].tx_slot;
+
+ /* Copy copy message into transfer buffer */
+ memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
+
+ if (len & 0x7)
+ len += 8;
+
+ /* Build descriptor associated with buffer */
+ desc = priv->omsg_ring[mbox].omd_base;
+ desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
+ if (tx_slot % 4 == 0)
+ desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
+
+ desc[tx_slot].msg_info =
+ cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
+ (0xe << 12) | (len & 0xff8));
+ desc[tx_slot].bufptr_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
+ 0xffffffff);
+ desc[tx_slot].bufptr_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
+
+ priv->omsg_ring[mbox].wr_count++;
+
+ /* Go to next descriptor */
+ if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
+ priv->omsg_ring[mbox].tx_slot = 0;
+ /* Move through the ring link descriptor at the end */
+ priv->omsg_ring[mbox].wr_count++;
+ }
+
+ mb();
+
+ /* Set new write count value */
+ iowrite32(priv->omsg_ring[mbox].wr_count,
+ priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+
+ return 0;
+}
+
+/**
+ * tsi721_omsg_handler - Outbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: number of OB MSG channel to service
+ *
+ * Services channel interrupts from outbound messaging engine.
+ */
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 omsg_int;
+
+ spin_lock(&priv->omsg_ring[ch].lock);
+
+ omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
+ dev_info(&priv->pdev->dev,
+ "OB MBOX%d: Status FIFO is full\n", ch);
+
+ if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
+ u32 srd_ptr;
+ u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
+ int i, j;
+ u32 tx_slot;
+
+ /*
+ * Find last successfully processed descriptor
+ */
+
+ /* Check and clear descriptor status FIFO entries */
+ srd_ptr = priv->omsg_ring[ch].sts_rdptr;
+ sts_ptr = priv->omsg_ring[ch].sts_base;
+ j = srd_ptr * 8;
+ while (sts_ptr[j]) {
+ for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
+ prev_ptr = last_ptr;
+ last_ptr = le64_to_cpu(sts_ptr[j]);
+ sts_ptr[j] = 0;
+ }
+
+ ++srd_ptr;
+ srd_ptr %= priv->omsg_ring[ch].sts_size;
+ j = srd_ptr * 8;
+ }
+
+ if (last_ptr == 0)
+ goto no_sts_update;
+
+ priv->omsg_ring[ch].sts_rdptr = srd_ptr;
+ iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
+
+ if (!priv->mport->outb_msg[ch].mcback)
+ goto no_sts_update;
+
+ /* Inform upper layer about transfer completion */
+
+ tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+
+ /*
+ * Check if this is a Link Descriptor (LD).
+ * If yes, ignore LD and use descriptor processed
+ * before LD.
+ */
+ if (tx_slot == priv->omsg_ring[ch].size) {
+ if (prev_ptr)
+ tx_slot = (prev_ptr -
+ (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+ else
+ goto no_sts_update;
+ }
+
+ /* Move slot index to the next message to be sent */
+ ++tx_slot;
+ if (tx_slot == priv->omsg_ring[ch].size)
+ tx_slot = 0;
+ BUG_ON(tx_slot >= priv->omsg_ring[ch].size);
+ priv->mport->outb_msg[ch].mcback(priv->mport,
+ priv->omsg_ring[ch].dev_id, ch,
+ tx_slot);
+ }
+
+no_sts_update:
+
+ if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
+ /*
+ * Outbound message operation aborted due to error,
+ * reinitialize OB MSG channel
+ */
+
+ dev_dbg(&priv->pdev->dev, "OB MSG ABORT ch_stat=%x\n",
+ ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
+
+ iowrite32(TSI721_OBDMAC_INT_ERROR,
+ priv->regs + TSI721_OBDMAC_INT(ch));
+ iowrite32(TSI721_OBDMAC_CTL_INIT,
+ priv->regs + TSI721_OBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
+
+ /* Inform upper level to clear all pending tx slots */
+ if (priv->mport->outb_msg[ch].mcback)
+ priv->mport->outb_msg[ch].mcback(priv->mport,
+ priv->omsg_ring[ch].dev_id, ch,
+ priv->omsg_ring[ch].tx_slot);
+ /* Synch tx_slot tracking */
+ iowrite32(priv->omsg_ring[ch].tx_slot,
+ priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
+ priv->omsg_ring[ch].sts_rdptr = 0;
+ }
+
+ /* Clear channel interrupts */
+ iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->omsg_ring[ch].lock);
+}
+
+/**
+ * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
+ * @mport: Master port implementing Outbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ */
+static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *bd_ptr;
+ int i, rc = 0;
+
+ if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
+ (entries > (TSI721_OMSGD_RING_SIZE)) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ priv->omsg_ring[mbox].dev_id = dev_id;
+ priv->omsg_ring[mbox].size = entries;
+ priv->omsg_ring[mbox].sts_rdptr = 0;
+ spin_lock_init(&priv->omsg_ring[mbox].lock);
+
+ /* Outbound Msg Buffer allocation based on
+ the number of maximum descriptor entries */
+ for (i = 0; i < entries; i++) {
+ priv->omsg_ring[mbox].omq_base[i] =
+ dma_alloc_coherent(
+ &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
+ &priv->omsg_ring[mbox].omq_phys[i],
+ GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate OB MSG data buffer for"
+ " MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+ }
+
+ /* Outbound message descriptor allocation */
+ priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
+ &priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omd_base == NULL) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate OB MSG descriptor memory "
+ "for MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ priv->omsg_ring[mbox].tx_slot = 0;
+
+ /* Outbound message descriptor status FIFO allocation */
+ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
+ priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size *
+ sizeof(struct tsi721_dma_sts),
+ &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL);
+ if (priv->omsg_ring[mbox].sts_base == NULL) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate OB MSG descriptor status FIFO "
+ "for MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_desc;
+ }
+
+ memset(priv->omsg_ring[mbox].sts_base, 0,
+ entries * sizeof(struct tsi721_dma_sts));
+
+ /*
+ * Configure Outbound Messaging Engine
+ */
+
+ /* Setup Outbound Message descriptor pointer */
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DPTRH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK),
+ priv->regs + TSI721_OBDMAC_DPTRL(mbox));
+
+ /* Setup Outbound Message descriptor status FIFO */
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DSBH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
+ TSI721_OBDMAC_DSBL_MASK),
+ priv->regs + TSI721_OBDMAC_DSBL(mbox));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
+ priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(
+ priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ tsi721_omsg_msix, 0,
+ priv->msix[TSI721_VECT_OMB0_DONE + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "OBOX%d-DONE\n", mbox);
+ goto out_stat;
+ }
+
+ rc = request_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+ tsi721_omsg_msix, 0,
+ priv->msix[TSI721_VECT_OMB0_INT + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "MBOX%d-INT\n", mbox);
+ free_irq(
+ priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ (void *)mport);
+ goto out_stat;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+ /* Initialize Outbound Message descriptors ring */
+ bd_ptr = priv->omsg_ring[mbox].omd_base;
+ bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
+ bd_ptr[entries].msg_info = 0;
+ bd_ptr[entries].next_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK);
+ bd_ptr[entries].next_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
+ priv->omsg_ring[mbox].wr_count = 0;
+ mb();
+
+ /* Initialize Outbound Message engine */
+ iowrite32(TSI721_OBDMAC_CTL_INIT, priv->regs + TSI721_OBDMAC_CTL(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ udelay(10);
+
+ priv->omsg_init[mbox] = 1;
+
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_stat:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+out_buf:
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 i;
+
+ if (!priv->omsg_init[mbox])
+ return;
+ priv->omsg_init[mbox] = 0;
+
+ /* Disable Interrupts */
+
+ tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ (void *)mport);
+ free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+ (void *)mport);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Free OMSG Descriptor Status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+
+ /* Free OMSG descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ (priv->omsg_ring[mbox].size + 1) *
+ sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+ /* Free message buffers */
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+}
+
+/**
+ * tsi721_imsg_handler - Inbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: inbound message channel number to service
+ *
+ * Services channel interrupts from inbound messaging engine.
+ */
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 mbox = ch - 4;
+ u32 imsg_int;
+
+ spin_lock(&priv->imsg_ring[mbox].lock);
+
+ imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
+
+ if (imsg_int & TSI721_IBDMAC_INT_SRTO)
+ dev_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout\n",
+ mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
+ dev_info(&priv->pdev->dev, "IB MBOX%d PCIe error\n",
+ mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
+ dev_info(&priv->pdev->dev,
+ "IB MBOX%d IB free queue low\n", mbox);
+
+ /* Clear IB channel interrupts */
+ iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* If an IB Msg is received notify the upper layer */
+ if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
+ priv->mport->inb_msg[mbox].mcback)
+ priv->mport->inb_msg[mbox].mcback(priv->mport,
+ priv->imsg_ring[mbox].dev_id, mbox, -1);
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->imsg_ring[mbox].lock);
+}
+
+/**
+ * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ */
+static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ int ch = mbox + 4;
+ int i;
+ u64 *free_ptr;
+ int rc = 0;
+
+ if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
+ (entries > TSI721_IMSGD_RING_SIZE) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize IB Messaging Ring */
+ priv->imsg_ring[mbox].dev_id = dev_id;
+ priv->imsg_ring[mbox].size = entries;
+ priv->imsg_ring[mbox].rx_slot = 0;
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+ for (i = 0; i < priv->imsg_ring[mbox].size; i++)
+ priv->imsg_ring[mbox].imq_base[i] = NULL;
+ spin_lock_init(&priv->imsg_ring[mbox].lock);
+
+ /* Allocate buffers for incoming messages */
+ priv->imsg_ring[mbox].buf_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * TSI721_MSG_BUFFER_SIZE,
+ &priv->imsg_ring[mbox].buf_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].buf_base == NULL) {
+ dev_err(&priv->pdev->dev,
+ "Failed to allocate buffers for IB MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Allocate memory for circular free list */
+ priv->imsg_ring[mbox].imfq_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * 8,
+ &priv->imsg_ring[mbox].imfq_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imfq_base == NULL) {
+ dev_err(&priv->pdev->dev,
+ "Failed to allocate free queue for IB MBOX%d\n", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ /* Allocate memory for Inbound message descriptors */
+ priv->imsg_ring[mbox].imd_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * sizeof(struct tsi721_imsg_desc),
+ &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imd_base == NULL) {
+ dev_err(&priv->pdev->dev,
+ "Failed to allocate descriptor memory for IB MBOX%d\n",
+ mbox);
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+
+ /* Fill free buffer pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ for (i = 0; i < entries; i++)
+ free_ptr[i] = cpu_to_le64(
+ (u64)(priv->imsg_ring[mbox].buf_phys) +
+ i * 0x1000);
+
+ mb();
+
+ /*
+ * For mapping of inbound SRIO Messages into appropriate queues we need
+ * to set Inbound Device ID register in the messaging engine. We do it
+ * once when first inbound mailbox is requested.
+ */
+ if (!(priv->flags & TSI721_IMSGID_SET)) {
+ iowrite32((u32)priv->mport->host_deviceid,
+ priv->regs + TSI721_IB_DEVID);
+ priv->flags |= TSI721_IMSGID_SET;
+ }
+
+ /*
+ * Configure Inbound Messaging channel (ch = mbox + 4)
+ */
+
+ /* Setup Inbound Message free queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
+ priv->regs + TSI721_IBDMAC_FQBH(ch));
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
+ TSI721_IBDMAC_FQBL_MASK),
+ priv->regs+TSI721_IBDMAC_FQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_FQSZ(ch));
+
+ /* Setup Inbound Message descriptor queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
+ priv->regs + TSI721_IBDMAC_DQBH(ch));
+ iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
+ (u32)TSI721_IBDMAC_DQBL_MASK),
+ priv->regs+TSI721_IBDMAC_DQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_DQSZ(ch));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ tsi721_imsg_msix, 0,
+ priv->msix[TSI721_VECT_IMB0_RCV + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "IBOX%d-DONE\n", mbox);
+ goto out_desc;
+ }
+
+ rc = request_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+ tsi721_imsg_msix, 0,
+ priv->msix[TSI721_VECT_IMB0_INT + mbox].irq_name,
+ (void *)mport);
+
+ if (rc) {
+ dev_dbg(&priv->pdev->dev,
+ "Unable to allocate MSI-X interrupt for "
+ "IBOX%d-INT\n", mbox);
+ free_irq(
+ priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)mport);
+ goto out_desc;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
+
+ /* Initialize Inbound Message Engine */
+ iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
+ udelay(10);
+ priv->imsg_ring[mbox].fq_wrptr = entries - 1;
+ iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
+
+ priv->imsg_init[mbox] = 1;
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_dma:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+out_buf:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int ch = mbox + 4;
+
+ if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
+ return;
+ priv->imsg_init[mbox] = 0;
+
+ /* Disable Inbound Messaging Engine */
+
+ /* Disable Interrupts */
+ tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)mport);
+ free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+ (void *)mport);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Clear Inbound Buffer Queue */
+ for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ /* Free memory allocated for message buffers */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+ /* Free memory allocated for free pointr list */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+ /* Free memory allocated for RX descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+}
+
+/**
+ * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ */
+static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int rc = 0;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
+ dev_err(&priv->pdev->dev,
+ "Error adding inbound buffer %d, buffer exists\n",
+ rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
+
+ if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ *
+ * Returns pointer to the message on success or NULL on failure.
+ */
+static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_imsg_desc *desc;
+ u32 rx_slot;
+ void *rx_virt = NULL;
+ u64 rx_phys;
+ void *buf = NULL;
+ u64 *free_ptr;
+ int ch = mbox + 4;
+ int msg_size;
+
+ if (!priv->imsg_init[mbox])
+ return NULL;
+
+ desc = priv->imsg_ring[mbox].imd_base;
+ desc += priv->imsg_ring[mbox].desc_rdptr;
+
+ if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
+ goto out;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
+ if (++rx_slot == priv->imsg_ring[mbox].size)
+ rx_slot = 0;
+ }
+
+ rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
+ le32_to_cpu(desc->bufptr_lo);
+
+ rx_virt = priv->imsg_ring[mbox].buf_base +
+ (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
+
+ buf = priv->imsg_ring[mbox].imq_base[rx_slot];
+ msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
+ if (msg_size == 0)
+ msg_size = RIO_MAX_MSG_SIZE;
+
+ memcpy(buf, rx_virt, msg_size);
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
+ if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].desc_rdptr,
+ priv->regs + TSI721_IBDMAC_DQRP(ch));
+
+ /* Return free buffer into the pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
+
+ if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].fq_wrptr,
+ priv->regs + TSI721_IBDMAC_FQWP(ch));
+out:
+ return buf;
+}
+
+/**
+ * tsi721_messages_init - Initialization of Messaging Engine
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 messaging engine.
+ */
+static int tsi721_messages_init(struct tsi721_device *priv)
+{
+ int ch;
+
+ iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
+ iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
+ iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
+
+ /* Set SRIO Message Request/Response Timeout */
+ iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
+
+ /* Initialize Inbound Messaging Engine Registers */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
+ /* Clear interrupt bits */
+ iowrite32(TSI721_IBDMAC_INT_MASK,
+ priv->regs + TSI721_IBDMAC_INT(ch));
+ /* Clear Status */
+ iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
+
+ iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
+ priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
+ iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
+ priv->regs + TSI721_SMSG_ECC_NCOR(ch));
+ }
+
+ return 0;
+}
+
+/**
+ * tsi721_disable_ints - disables all device interrupts
+ * @priv: pointer to tsi721 private data
+ */
+static void tsi721_disable_ints(struct tsi721_device *priv)
+{
+ int ch;
+
+ /* Disable all device level interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+ /* Disable all Device Channel interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /* Disable all Inbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ /* Disable all Outbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ /* Disable all general messaging interrupts */
+ iowrite32(0, priv->regs + TSI721_SMSG_INTE);
+
+ /* Disable all BDMA Channel interrupts */
+ for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
+ iowrite32(0, priv->regs + TSI721_DMAC_INTE(ch));
+
+ /* Disable all general BDMA interrupts */
+ iowrite32(0, priv->regs + TSI721_BDMA_INTE);
+
+ /* Disable all SRIO Channel interrupts */
+ for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
+ iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
+
+ /* Disable all general SR2PC interrupts */
+ iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
+
+ /* Disable all PC2SR interrupts */
+ iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
+
+ /* Disable all I2C interrupts */
+ iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
+
+ /* Disable SRIO MAC interrupts */
+ iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+ iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+}
+
+/**
+ * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 as RapidIO master port.
+ */
+static int __devinit tsi721_setup_mport(struct tsi721_device *priv)
+{
+ struct pci_dev *pdev = priv->pdev;
+ int err = 0;
+ struct rio_ops *ops;
+
+ struct rio_mport *mport;
+
+ ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ if (!ops) {
+ dev_dbg(&pdev->dev, "Unable to allocate memory for rio_ops\n");
+ return -ENOMEM;
+ }
+
+ ops->lcread = tsi721_lcread;
+ ops->lcwrite = tsi721_lcwrite;
+ ops->cread = tsi721_cread_dma;
+ ops->cwrite = tsi721_cwrite_dma;
+ ops->dsend = tsi721_dsend;
+ ops->open_inb_mbox = tsi721_open_inb_mbox;
+ ops->close_inb_mbox = tsi721_close_inb_mbox;
+ ops->open_outb_mbox = tsi721_open_outb_mbox;
+ ops->close_outb_mbox = tsi721_close_outb_mbox;
+ ops->add_outb_message = tsi721_add_outb_message;
+ ops->add_inb_buffer = tsi721_add_inb_buffer;
+ ops->get_inb_message = tsi721_get_inb_message;
+
+ mport = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!mport) {
+ kfree(ops);
+ dev_dbg(&pdev->dev, "Unable to allocate memory for mport\n");
+ return -ENOMEM;
+ }
+
+ mport->ops = ops;
+ mport->index = 0;
+ mport->sys_size = 0; /* small system */
+ mport->phy_type = RIO_PHY_SERIAL;
+ mport->priv = (void *)priv;
+ mport->phys_efptr = 0x100;
+
+ INIT_LIST_HEAD(&mport->dbells);
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+ strcpy(mport->name, "Tsi721 mport");
+
+ /* Hook up interrupt handler */
+
+#ifdef CONFIG_PCI_MSI
+ if (!tsi721_enable_msix(priv))
+ priv->flags |= TSI721_USING_MSIX;
+ else if (!pci_enable_msi(pdev))
+ priv->flags |= TSI721_USING_MSI;
+ else
+ dev_info(&pdev->dev,
+ "MSI/MSI-X is not available. Using legacy INTx.\n");
+#endif /* CONFIG_PCI_MSI */
+
+ err = tsi721_request_irq(mport);
+
+ if (!err) {
+ tsi721_interrupts_init(priv);
+ ops->pwenable = tsi721_pw_enable;
+ } else
+ dev_err(&pdev->dev, "Unable to get assigned PCI IRQ "
+ "vector %02X err=0x%x\n", pdev->irq, err);
+
+ /* Enable SRIO link */
+ iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
+ TSI721_DEVCTL_SRBOOT_CMPL,
+ priv->regs + TSI721_DEVCTL);
+
+ rio_register_mport(mport);
+ priv->mport = mport;
+
+ if (mport->host_deviceid >= 0)
+ iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
+ RIO_PORT_GEN_DISCOVERED,
+ priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+ else
+ iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+
+ return 0;
+}
+
+static int __devinit tsi721_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct tsi721_device *priv;
+ int i;
+ int err;
+ u32 regval;
+
+ priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate memory for device\n");
+ err = -ENOMEM;
+ goto err_exit;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable PCI device\n");
+ goto err_clean;
+ }
+
+ priv->pdev = pdev;
+
+#ifdef DEBUG
+ for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+ dev_dbg(&pdev->dev, "res[%d] @ 0x%llx (0x%lx, 0x%lx)\n",
+ i, (unsigned long long)pci_resource_start(pdev, i),
+ (unsigned long)pci_resource_len(pdev, i),
+ pci_resource_flags(pdev, i));
+ }
+#endif
+ /*
+ * Verify BAR configuration
+ */
+
+ /* BAR_0 (registers) must be 512KB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
+ dev_err(&pdev->dev,
+ "Missing or misconfigured CSR BAR0, aborting.\n");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
+ dev_err(&pdev->dev,
+ "Missing or misconfigured Doorbell BAR1, aborting.\n");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /*
+ * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
+ * space.
+ * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
+ * It may be a good idea to keep them disabled using HW configuration
+ * to save PCI memory space.
+ */
+ if ((pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM) &&
+ (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64)) {
+ dev_info(&pdev->dev, "Outbound BAR2 is not used but enabled.\n");
+ }
+
+ if ((pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM) &&
+ (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64)) {
+ dev_info(&pdev->dev, "Outbound BAR4 is not used but enabled.\n");
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot obtain PCI resources, "
+ "aborting.\n");
+ goto err_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ priv->regs = pci_ioremap_bar(pdev, BAR_0);
+ if (!priv->regs) {
+ dev_err(&pdev->dev,
+ "Unable to map device registers space, aborting\n");
+ err = -ENOMEM;
+ goto err_free_res;
+ }
+
+ priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
+ if (!priv->odb_base) {
+ dev_err(&pdev->dev,
+ "Unable to map outbound doorbells space, aborting\n");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ /* Configure DMA attributes. */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dev_info(&pdev->dev, "Unable to set DMA mask\n");
+ goto err_unmap_bars;
+ }
+
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
+ dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
+ } else {
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err)
+ dev_info(&pdev->dev, "Unable to set consistent DMA mask\n");
+ }
+
+ /* Clear "no snoop" and "relaxed ordering" bits. */
+ pci_read_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, ®val);
+ regval &= ~(PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN);
+ pci_write_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, regval);
+
+ /*
+ * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
+ */
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
+ TSI721_MSIXTBL_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
+ TSI721_MSIXPBA_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
+ /* End of FIXUP */
+
+ tsi721_disable_ints(priv);
+
+ tsi721_init_pc2sr_mapping(priv);
+ tsi721_init_sr2pc_mapping(priv);
+
+ if (tsi721_bdma_init(priv)) {
+ dev_err(&pdev->dev, "BDMA initialization failed, aborting\n");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ err = tsi721_doorbell_init(priv);
+ if (err)
+ goto err_free_bdma;
+
+ tsi721_port_write_init(priv);
+
+ err = tsi721_messages_init(priv);
+ if (err)
+ goto err_free_consistent;
+
+ err = tsi721_setup_mport(priv);
+ if (err)
+ goto err_free_consistent;
+
+ return 0;
+
+err_free_consistent:
+ tsi721_doorbell_free(priv);
+err_free_bdma:
+ tsi721_bdma_free(priv);
+err_unmap_bars:
+ if (priv->regs)
+ iounmap(priv->regs);
+ if (priv->odb_base)
+ iounmap(priv->odb_base);
+err_free_res:
+ pci_release_regions(pdev);
+ pci_clear_master(pdev);
+err_disable_pdev:
+ pci_disable_device(pdev);
+err_clean:
+ kfree(priv);
+err_exit:
+ return err;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(tsi721_pci_tbl) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
+ { 0, } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
+
+static struct pci_driver tsi721_driver = {
+ .name = "tsi721",
+ .id_table = tsi721_pci_tbl,
+ .probe = tsi721_probe,
+};
+
+static int __init tsi721_init(void)
+{
+ return pci_register_driver(&tsi721_driver);
+}
+
+static void __exit tsi721_exit(void)
+{
+ pci_unregister_driver(&tsi721_driver);
+}
+
+device_initcall(tsi721_init);
diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h
new file mode 100644
index 0000000..58be4de
--- /dev/null
+++ b/drivers/rapidio/devices/tsi721.h
@@ -0,0 +1,766 @@
+/*
+ * Tsi721 PCIExpress-to-SRIO bridge definitions
+ *
+ * Copyright 2011, Integrated Device Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __TSI721_H
+#define __TSI721_H
+
+#define DRV_NAME "tsi721"
+
+#define DEFAULT_HOPCOUNT 0xff
+#define DEFAULT_DESTID 0xff
+
+/* PCI device ID */
+#define PCI_DEVICE_ID_TSI721 0x80ab
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_2 2
+#define BAR_4 4
+
+#define TSI721_PC2SR_BARS 2
+#define TSI721_PC2SR_WINS 8
+#define TSI721_PC2SR_ZONES 8
+#define TSI721_MAINT_WIN 0 /* Window for outbound maintenance requests */
+#define IDB_QUEUE 0 /* Inbound Doorbell Queue to use */
+#define IDB_QSIZE 512 /* Inbound Doorbell Queue size */
+
+/* Memory space sizes */
+#define TSI721_REG_SPACE_SIZE (512 * 1024) /* 512K */
+#define TSI721_DB_WIN_SIZE (16 * 1024 * 1024) /* 16MB */
+
+#define RIO_TT_CODE_8 0x00000000
+#define RIO_TT_CODE_16 0x00000001
+
+#define TSI721_DMA_MAXCH 8
+#define TSI721_DMA_MINSTSSZ 32
+#define TSI721_DMA_STSBLKSZ 8
+
+#define TSI721_SRIO_MAXCH 8
+
+#define DBELL_SID(buf) (((u8)buf[2] << 8) | (u8)buf[3])
+#define DBELL_TID(buf) (((u8)buf[4] << 8) | (u8)buf[5])
+#define DBELL_INF(buf) (((u8)buf[0] << 8) | (u8)buf[1])
+
+#define TSI721_RIO_PW_MSG_SIZE 16 /* Tsi721 saves only 16 bytes of PW msg */
+
+/* Register definitions */
+
+/*
+ * Registers in PCIe configuration space
+ */
+
+#define TSI721_PCIECFG_MSIXTBL 0x0a4
+#define TSI721_MSIXTBL_OFFSET 0x2c000
+#define TSI721_PCIECFG_MSIXPBA 0x0a8
+#define TSI721_MSIXPBA_OFFSET 0x2a000
+#define TSI721_PCIECFG_EPCTL 0x400
+
+/*
+ * Event Management Registers
+ */
+
+#define TSI721_RIO_EM_INT_STAT 0x10910
+#define TSI721_RIO_EM_INT_STAT_PW_RX 0x00010000
+
+#define TSI721_RIO_EM_INT_ENABLE 0x10914
+#define TSI721_RIO_EM_INT_ENABLE_PW_RX 0x00010000
+
+#define TSI721_RIO_EM_DEV_INT_EN 0x10930
+#define TSI721_RIO_EM_DEV_INT_EN_INT 0x00000001
+
+/*
+ * Port-Write Block Registers
+ */
+
+#define TSI721_RIO_PW_CTL 0x10a04
+#define TSI721_RIO_PW_CTL_PW_TIMER 0xf0000000
+#define TSI721_RIO_PW_CTL_PWT_DIS (0 << 28)
+#define TSI721_RIO_PW_CTL_PWT_103 (1 << 28)
+#define TSI721_RIO_PW_CTL_PWT_205 (1 << 29)
+#define TSI721_RIO_PW_CTL_PWT_410 (1 << 30)
+#define TSI721_RIO_PW_CTL_PWT_820 (1 << 31)
+#define TSI721_RIO_PW_CTL_PWC_MODE 0x01000000
+#define TSI721_RIO_PW_CTL_PWC_CONT 0x00000000
+#define TSI721_RIO_PW_CTL_PWC_REL 0x01000000
+
+#define TSI721_RIO_PW_RX_STAT 0x10a10
+#define TSI721_RIO_PW_RX_STAT_WR_SIZE 0x0000f000
+#define TSI_RIO_PW_RX_STAT_WDPTR 0x00000100
+#define TSI721_RIO_PW_RX_STAT_PW_SHORT 0x00000008
+#define TSI721_RIO_PW_RX_STAT_PW_TRUNC 0x00000004
+#define TSI721_RIO_PW_RX_STAT_PW_DISC 0x00000002
+#define TSI721_RIO_PW_RX_STAT_PW_VAL 0x00000001
+
+#define TSI721_RIO_PW_RX_CAPT(x) (0x10a20 + (x)*4)
+
+/*
+ * Inbound Doorbells
+ */
+
+#define TSI721_IDB_ENTRY_SIZE 64
+
+#define TSI721_IDQ_CTL(x) (0x20000 + (x) * 1000)
+#define TSI721_IDQ_SUSPEND 0x00000002
+#define TSI721_IDQ_INIT 0x00000001
+
+#define TSI721_IDQ_STS(x) (0x20004 + (x) * 1000)
+#define TSI721_IDQ_RUN 0x00200000
+
+#define TSI721_IDQ_MASK(x) (0x20008 + (x) * 1000)
+#define TSI721_IDQ_MASK_MASK 0xffff0000
+#define TSI721_IDQ_MASK_PATT 0x0000ffff
+
+#define TSI721_IDQ_RP(x) (0x2000c + (x) * 1000)
+#define TSI721_IDQ_RP_PTR 0x0007ffff
+
+#define TSI721_IDQ_WP(x) (0x20010 + (x) * 1000)
+#define TSI721_IDQ_WP_PTR 0x0007ffff
+
+#define TSI721_IDQ_BASEL(x) (0x20014 + (x) * 1000)
+#define TSI721_IDQ_BASEL_ADDR 0xffffffc0
+#define TSI721_IDQ_BASEU(x) (0x20018 + (x) * 1000)
+#define TSI721_IDQ_SIZE(x) (0x2001c + (x) * 1000)
+#define TSI721_IDQ_SIZE_VAL(size) (__fls(size) - 4)
+#define TSI721_IDQ_SIZE_MIN 512
+#define TSI721_IDQ_SIZE_MAX (512 * 1024)
+
+#define TSI721_SR_CHINT(x) (0x20040 + (x) * 1000)
+#define TSI721_SR_CHINTE(x) (0x20044 + (x) * 1000)
+#define TSI721_SR_CHINTSET(x) (0x20048 + (x) * 1000)
+#define TSI721_SR_CHINT_ODBOK 0x00000020
+#define TSI721_SR_CHINT_IDBQRCV 0x00000010
+#define TSI721_SR_CHINT_SUSP 0x00000008
+#define TSI721_SR_CHINT_ODBTO 0x00000004
+#define TSI721_SR_CHINT_ODBRTRY 0x00000002
+#define TSI721_SR_CHINT_ODBERR 0x00000001
+#define TSI721_SR_CHINT_ALL 0x0000003f
+
+#define TSI721_IBWIN_NUM 8
+
+#define TSI721_IBWINLB(x) (0x29000 + (x) * 20)
+#define TSI721_IBWINLB_BA 0xfffff000
+#define TSI721_IBWINLB_WEN 0x00000001
+
+#define TSI721_SR2PC_GEN_INTE 0x29800
+#define TSI721_SR2PC_PWE 0x29804
+#define TSI721_SR2PC_GEN_INT 0x29808
+
+#define TSI721_DEV_INTE 0x29840
+#define TSI721_DEV_INT 0x29844
+#define TSI721_DEV_INTSET 0x29848
+#define TSI721_DEV_INT_SMSG_CH 0x00000800
+#define TSI721_DEV_INT_SMSG_NCH 0x00000400
+#define TSI721_DEV_INT_SR2PC_CH 0x00000200
+#define TSI721_DEV_INT_SRIO 0x00000020
+
+#define TSI721_DEV_CHAN_INTE 0x2984c
+#define TSI721_DEV_CHAN_INT 0x29850
+
+#define TSI721_INT_SR2PC_CHAN_M 0xff000000
+#define TSI721_INT_SR2PC_CHAN(x) (1 << (24 + (x)))
+#define TSI721_INT_IMSG_CHAN_M 0x00ff0000
+#define TSI721_INT_IMSG_CHAN(x) (1 << (16 + (x)))
+#define TSI721_INT_OMSG_CHAN_M 0x0000ff00
+#define TSI721_INT_OMSG_CHAN(x) (1 << (8 + (x)))
+
+/*
+ * PC2SR block registers
+ */
+#define TSI721_OBWIN_NUM TSI721_PC2SR_WINS
+
+#define TSI721_OBWINLB(x) (0x40000 + (x) * 20)
+#define TSI721_OBWINLB_BA 0xffff8000
+#define TSI721_OBWINLB_WEN 0x00000001
+
+#define TSI721_OBWINUB(x) (0x40004 + (x) * 20)
+
+#define TSI721_OBWINSZ(x) (0x40008 + (x) * 20)
+#define TSI721_OBWINSZ_SIZE 0x00001f00
+#define TSI721_OBWIN_SIZE(size) (__fls(size) - 15)
+
+#define TSI721_ZONE_SEL 0x41300
+#define TSI721_ZONE_SEL_RD_WRB 0x00020000
+#define TSI721_ZONE_SEL_GO 0x00010000
+#define TSI721_ZONE_SEL_WIN 0x00000038
+#define TSI721_ZONE_SEL_ZONE 0x00000007
+
+#define TSI721_LUT_DATA0 0x41304
+#define TSI721_LUT_DATA0_ADD 0xfffff000
+#define TSI721_LUT_DATA0_RDTYPE 0x00000f00
+#define TSI721_LUT_DATA0_NREAD 0x00000100
+#define TSI721_LUT_DATA0_MNTRD 0x00000200
+#define TSI721_LUT_DATA0_RDCRF 0x00000020
+#define TSI721_LUT_DATA0_WRCRF 0x00000010
+#define TSI721_LUT_DATA0_WRTYPE 0x0000000f
+#define TSI721_LUT_DATA0_NWR 0x00000001
+#define TSI721_LUT_DATA0_MNTWR 0x00000002
+#define TSI721_LUT_DATA0_NWR_R 0x00000004
+
+#define TSI721_LUT_DATA1 0x41308
+
+#define TSI721_LUT_DATA2 0x4130c
+#define TSI721_LUT_DATA2_HC 0xff000000
+#define TSI721_LUT_DATA2_ADD65 0x000c0000
+#define TSI721_LUT_DATA2_TT 0x00030000
+#define TSI721_LUT_DATA2_DSTID 0x0000ffff
+
+#define TSI721_PC2SR_INTE 0x41310
+
+#define TSI721_DEVCTL 0x48004
+#define TSI721_DEVCTL_SRBOOT_CMPL 0x00000004
+
+#define TSI721_I2C_INT_ENABLE 0x49120
+
+/*
+ * Block DMA Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_DMAC_DWRCNT(x) (0x51000 + (x) * 0x1000)
+#define TSI721_DMAC_DRDCNT(x) (0x51004 + (x) * 0x1000)
+
+#define TSI721_DMAC_CTL(x) (0x51008 + (x) * 0x1000)
+#define TSI721_DMAC_CTL_SUSP 0x00000002
+#define TSI721_DMAC_CTL_INIT 0x00000001
+
+#define TSI721_DMAC_INT(x) (0x5100c + (x) * 0x1000)
+#define TSI721_DMAC_INT_STFULL 0x00000010
+#define TSI721_DMAC_INT_DONE 0x00000008
+#define TSI721_DMAC_INT_SUSP 0x00000004
+#define TSI721_DMAC_INT_ERR 0x00000002
+#define TSI721_DMAC_INT_IOFDONE 0x00000001
+#define TSI721_DMAC_INT_ALL 0x0000001f
+
+#define TSI721_DMAC_INTSET(x) (0x51010 + (x) * 0x1000)
+
+#define TSI721_DMAC_STS(x) (0x51014 + (x) * 0x1000)
+#define TSI721_DMAC_STS_ABORT 0x00400000
+#define TSI721_DMAC_STS_RUN 0x00200000
+#define TSI721_DMAC_STS_CS 0x001f0000
+
+#define TSI721_DMAC_INTE(x) (0x51018 + (x) * 0x1000)
+
+#define TSI721_DMAC_DPTRL(x) (0x51024 + (x) * 0x1000)
+#define TSI721_DMAC_DPTRL_MASK 0xffffffe0
+
+#define TSI721_DMAC_DPTRH(x) (0x51028 + (x) * 0x1000)
+
+#define TSI721_DMAC_DSBL(x) (0x5102c + (x) * 0x1000)
+#define TSI721_DMAC_DSBL_MASK 0xffffffc0
+
+#define TSI721_DMAC_DSBH(x) (0x51030 + (x) * 0x1000)
+
+#define TSI721_DMAC_DSSZ(x) (0x51034 + (x) * 0x1000)
+#define TSI721_DMAC_DSSZ_SIZE_M 0x0000000f
+#define TSI721_DMAC_DSSZ_SIZE(size) (__fls(size) - 4)
+
+
+#define TSI721_DMAC_DSRP(x) (0x51038 + (x) * 0x1000)
+#define TSI721_DMAC_DSRP_MASK 0x0007ffff
+
+#define TSI721_DMAC_DSWP(x) (0x5103c + (x) * 0x1000)
+#define TSI721_DMAC_DSWP_MASK 0x0007ffff
+
+#define TSI721_BDMA_INTE 0x5f000
+
+/*
+ * Messaging definitions
+ */
+#define TSI721_MSG_BUFFER_SIZE RIO_MAX_MSG_SIZE
+#define TSI721_MSG_MAX_SIZE RIO_MAX_MSG_SIZE
+#define TSI721_IMSG_MAXCH 8
+#define TSI721_IMSG_CHNUM TSI721_IMSG_MAXCH
+#define TSI721_IMSGD_MIN_RING_SIZE 32
+#define TSI721_IMSGD_RING_SIZE 512
+
+#define TSI721_OMSG_CHNUM 4 /* One channel per MBOX */
+#define TSI721_OMSGD_MIN_RING_SIZE 32
+#define TSI721_OMSGD_RING_SIZE 512
+
+/*
+ * Outbound Messaging Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_OBDMAC_DWRCNT(x) (0x61000 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_DRDCNT(x) (0x61004 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_CTL(x) (0x61008 + (x) * 0x1000)
+#define TSI721_OBDMAC_CTL_MASK 0x00000007
+#define TSI721_OBDMAC_CTL_RETRY_THR 0x00000004
+#define TSI721_OBDMAC_CTL_SUSPEND 0x00000002
+#define TSI721_OBDMAC_CTL_INIT 0x00000001
+
+#define TSI721_OBDMAC_INT(x) (0x6100c + (x) * 0x1000)
+#define TSI721_OBDMAC_INTSET(x) (0x61010 + (x) * 0x1000)
+#define TSI721_OBDMAC_INTE(x) (0x61018 + (x) * 0x1000)
+#define TSI721_OBDMAC_INT_MASK 0x0000001F
+#define TSI721_OBDMAC_INT_ST_FULL 0x00000010
+#define TSI721_OBDMAC_INT_DONE 0x00000008
+#define TSI721_OBDMAC_INT_SUSPENDED 0x00000004
+#define TSI721_OBDMAC_INT_ERROR 0x00000002
+#define TSI721_OBDMAC_INT_IOF_DONE 0x00000001
+#define TSI721_OBDMAC_INT_ALL TSI721_OBDMAC_INT_MASK
+
+#define TSI721_OBDMAC_STS(x) (0x61014 + (x) * 0x1000)
+#define TSI721_OBDMAC_STS_MASK 0x007f0000
+#define TSI721_OBDMAC_STS_ABORT 0x00400000
+#define TSI721_OBDMAC_STS_RUN 0x00200000
+#define TSI721_OBDMAC_STS_CS 0x001f0000
+
+#define TSI721_OBDMAC_PWE(x) (0x6101c + (x) * 0x1000)
+#define TSI721_OBDMAC_PWE_MASK 0x00000002
+#define TSI721_OBDMAC_PWE_ERROR_EN 0x00000002
+
+#define TSI721_OBDMAC_DPTRL(x) (0x61020 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRL_MASK 0xfffffff0
+
+#define TSI721_OBDMAC_DPTRH(x) (0x61024 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRH_MASK 0xffffffff
+
+#define TSI721_OBDMAC_DSBL(x) (0x61040 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBL_MASK 0xffffffc0
+
+#define TSI721_OBDMAC_DSBH(x) (0x61044 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBH_MASK 0xffffffff
+
+#define TSI721_OBDMAC_DSSZ(x) (0x61048 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSSZ_MASK 0x0000000f
+
+#define TSI721_OBDMAC_DSRP(x) (0x6104c + (x) * 0x1000)
+#define TSI721_OBDMAC_DSRP_MASK 0x0007ffff
+
+#define TSI721_OBDMAC_DSWP(x) (0x61050 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSWP_MASK 0x0007ffff
+
+#define TSI721_RQRPTO 0x60010
+#define TSI721_RQRPTO_MASK 0x00ffffff
+#define TSI721_RQRPTO_VAL 400 /* Response TO value */
+
+/*
+ * Inbound Messaging Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_IB_DEVID_GLOBAL 0xffff
+#define TSI721_IBDMAC_FQBL(x) (0x61200 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBL_MASK 0xffffffc0
+
+#define TSI721_IBDMAC_FQBH(x) (0x61204 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBH_MASK 0xffffffff
+
+#define TSI721_IBDMAC_FQSZ_ENTRY_INX TSI721_IMSGD_RING_SIZE
+#define TSI721_IBDMAC_FQSZ(x) (0x61208 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQSZ_MASK 0x0000000f
+
+#define TSI721_IBDMAC_FQRP(x) (0x6120c + (x) * 0x1000)
+#define TSI721_IBDMAC_FQRP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_FQWP(x) (0x61210 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQWP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_FQTH(x) (0x61214 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQTH_MASK 0x0007ffff
+
+#define TSI721_IB_DEVID 0x60020
+#define TSI721_IB_DEVID_MASK 0x0000ffff
+
+#define TSI721_IBDMAC_CTL(x) (0x61240 + (x) * 0x1000)
+#define TSI721_IBDMAC_CTL_MASK 0x00000003
+#define TSI721_IBDMAC_CTL_SUSPEND 0x00000002
+#define TSI721_IBDMAC_CTL_INIT 0x00000001
+
+#define TSI721_IBDMAC_STS(x) (0x61244 + (x) * 0x1000)
+#define TSI721_IBDMAC_STS_MASK 0x007f0000
+#define TSI721_IBSMAC_STS_ABORT 0x00400000
+#define TSI721_IBSMAC_STS_RUN 0x00200000
+#define TSI721_IBSMAC_STS_CS 0x001f0000
+
+#define TSI721_IBDMAC_INT(x) (0x61248 + (x) * 0x1000)
+#define TSI721_IBDMAC_INTSET(x) (0x6124c + (x) * 0x1000)
+#define TSI721_IBDMAC_INTE(x) (0x61250 + (x) * 0x1000)
+#define TSI721_IBDMAC_INT_MASK 0x0000100f
+#define TSI721_IBDMAC_INT_SRTO 0x00001000
+#define TSI721_IBDMAC_INT_SUSPENDED 0x00000008
+#define TSI721_IBDMAC_INT_PC_ERROR 0x00000004
+#define TSI721_IBDMAC_INT_FQ_LOW 0x00000002
+#define TSI721_IBDMAC_INT_DQ_RCV 0x00000001
+#define TSI721_IBDMAC_INT_ALL TSI721_IBDMAC_INT_MASK
+
+#define TSI721_IBDMAC_PWE(x) (0x61254 + (x) * 0x1000)
+#define TSI721_IBDMAC_PWE_MASK 0x00001700
+#define TSI721_IBDMAC_PWE_SRTO 0x00001000
+#define TSI721_IBDMAC_PWE_ILL_FMT 0x00000400
+#define TSI721_IBDMAC_PWE_ILL_DEC 0x00000200
+#define TSI721_IBDMAC_PWE_IMP_SP 0x00000100
+
+#define TSI721_IBDMAC_DQBL(x) (0x61300 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBL_MASK 0xffffffc0
+#define TSI721_IBDMAC_DQBL_ADDR 0xffffffc0
+
+#define TSI721_IBDMAC_DQBH(x) (0x61304 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBH_MASK 0xffffffff
+
+#define TSI721_IBDMAC_DQRP(x) (0x61308 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQRP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_DQWR(x) (0x6130c + (x) * 0x1000)
+#define TSI721_IBDMAC_DQWR_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_DQSZ(x) (0x61314 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQSZ_MASK 0x0000000f
+
+/*
+ * Messaging Engine Interrupts
+ */
+
+#define TSI721_SMSG_PWE 0x6a004
+
+#define TSI721_SMSG_INTE 0x6a000
+#define TSI721_SMSG_INT 0x6a008
+#define TSI721_SMSG_INTSET 0x6a010
+#define TSI721_SMSG_INT_MASK 0x0086ffff
+#define TSI721_SMSG_INT_UNS_RSP 0x00800000
+#define TSI721_SMSG_INT_ECC_NCOR 0x00040000
+#define TSI721_SMSG_INT_ECC_COR 0x00020000
+#define TSI721_SMSG_INT_ECC_NCOR_CH 0x0000ff00
+#define TSI721_SMSG_INT_ECC_COR_CH 0x000000ff
+
+#define TSI721_SMSG_ECC_LOG 0x6a014
+#define TSI721_SMSG_ECC_LOG_MASK 0x00070007
+#define TSI721_SMSG_ECC_LOG_ECC_NCOR_M 0x00070000
+#define TSI721_SMSG_ECC_LOG_ECC_COR_M 0x00000007
+
+#define TSI721_RETRY_GEN_CNT 0x6a100
+#define TSI721_RETRY_GEN_CNT_MASK 0xffffffff
+
+#define TSI721_RETRY_RX_CNT 0x6a104
+#define TSI721_RETRY_RX_CNT_MASK 0xffffffff
+
+#define TSI721_SMSG_ECC_COR_LOG(x) (0x6a300 + (x) * 4)
+#define TSI721_SMSG_ECC_COR_LOG_MASK 0x000000ff
+
+#define TSI721_SMSG_ECC_NCOR(x) (0x6a340 + (x) * 4)
+#define TSI721_SMSG_ECC_NCOR_MASK 0x000000ff
+
+/*
+ * Block DMA Descriptors
+ */
+
+struct tsi721_dma_desc {
+ __le32 type_id;
+
+#define TSI721_DMAD_DEVID 0x0000ffff
+#define TSI721_DMAD_CRF 0x00010000
+#define TSI721_DMAD_PRIO 0x00060000
+#define TSI721_DMAD_RTYPE 0x00780000
+#define TSI721_DMAD_IOF 0x08000000
+#define TSI721_DMAD_DTYPE 0xe0000000
+
+ __le32 bcount;
+
+#define TSI721_DMAD_BCOUNT1 0x03ffffff /* if DTYPE == 1 */
+#define TSI721_DMAD_BCOUNT2 0x0000000f /* if DTYPE == 2 */
+#define TSI721_DMAD_TT 0x0c000000
+#define TSI721_DMAD_RADDR0 0xc0000000
+
+ union {
+ __le32 raddr_lo; /* if DTYPE == (1 || 2) */
+ __le32 next_lo; /* if DTYPE == 3 */
+ };
+
+#define TSI721_DMAD_CFGOFF 0x00ffffff
+#define TSI721_DMAD_HOPCNT 0xff000000
+
+ union {
+ __le32 raddr_hi; /* if DTYPE == (1 || 2) */
+ __le32 next_hi; /* if DTYPE == 3 */
+ };
+
+ union {
+ struct { /* if DTYPE == 1 */
+ __le32 bufptr_lo;
+ __le32 bufptr_hi;
+ __le32 s_dist;
+ __le32 s_size;
+ } t1;
+ __le32 data[4]; /* if DTYPE == 2 */
+ u32 reserved[4]; /* if DTYPE == 3 */
+ };
+} __aligned(32);
+
+/*
+ * Inbound Messaging Descriptor
+ */
+struct tsi721_imsg_desc {
+ __le32 type_id;
+
+#define TSI721_IMD_DEVID 0x0000ffff
+#define TSI721_IMD_CRF 0x00010000
+#define TSI721_IMD_PRIO 0x00060000
+#define TSI721_IMD_TT 0x00180000
+#define TSI721_IMD_DTYPE 0xe0000000
+
+ __le32 msg_info;
+
+#define TSI721_IMD_BCOUNT 0x00000ff8
+#define TSI721_IMD_SSIZE 0x0000f000
+#define TSI721_IMD_LETER 0x00030000
+#define TSI721_IMD_XMBOX 0x003c0000
+#define TSI721_IMD_MBOX 0x00c00000
+#define TSI721_IMD_CS 0x78000000
+#define TSI721_IMD_HO 0x80000000
+
+ __le32 bufptr_lo;
+ __le32 bufptr_hi;
+ u32 reserved[12];
+
+} __aligned(64);
+
+/*
+ * Outbound Messaging Descriptor
+ */
+struct tsi721_omsg_desc {
+ __le32 type_id;
+
+#define TSI721_OMD_DEVID 0x0000ffff
+#define TSI721_OMD_CRF 0x00010000
+#define TSI721_OMD_PRIO 0x00060000
+#define TSI721_OMD_IOF 0x08000000
+#define TSI721_OMD_DTYPE 0xe0000000
+#define TSI721_OMD_RSRVD 0x17f80000
+
+ __le32 msg_info;
+
+#define TSI721_OMD_BCOUNT 0x00000ff8
+#define TSI721_OMD_SSIZE 0x0000f000
+#define TSI721_OMD_LETER 0x00030000
+#define TSI721_OMD_XMBOX 0x003c0000
+#define TSI721_OMD_MBOX 0x00c00000
+#define TSI721_OMD_TT 0x0c000000
+
+ union {
+ __le32 bufptr_lo; /* if DTYPE == 4 */
+ __le32 next_lo; /* if DTYPE == 5 */
+ };
+
+ union {
+ __le32 bufptr_hi; /* if DTYPE == 4 */
+ __le32 next_hi; /* if DTYPE == 5 */
+ };
+
+} __aligned(16);
+
+struct tsi721_dma_sts {
+ __le64 desc_sts[8];
+} __aligned(64);
+
+struct tsi721_desc_sts_fifo {
+ union {
+ __le64 da64;
+ struct {
+ __le32 lo;
+ __le32 hi;
+ } da32;
+ } stat[8];
+} __aligned(64);
+
+/* Descriptor types for BDMA and Messaging blocks */
+enum dma_dtype {
+ DTYPE1 = 1, /* Data Transfer DMA Descriptor */
+ DTYPE2 = 2, /* Immediate Data Transfer DMA Descriptor */
+ DTYPE3 = 3, /* Block Pointer DMA Descriptor */
+ DTYPE4 = 4, /* Outbound Msg DMA Descriptor */
+ DTYPE5 = 5, /* OB Messaging Block Pointer Descriptor */
+ DTYPE6 = 6 /* Inbound Messaging Descriptor */
+};
+
+enum dma_rtype {
+ NREAD = 0,
+ LAST_NWRITE_R = 1,
+ ALL_NWRITE = 2,
+ ALL_NWRITE_R = 3,
+ MAINT_RD = 4,
+ MAINT_WR = 5
+};
+
+/*
+ * mport Driver Definitions
+ */
+#define TSI721_DMA_CHNUM TSI721_DMA_MAXCH
+
+#define TSI721_DMACH_MAINT 0 /* DMA channel for maint requests */
+#define TSI721_DMACH_MAINT_NBD 32 /* Number of BDs for maint requests */
+
+#define MSG_DMA_ENTRY_INX_TO_SIZE(x) ((0x10 << (x)) & 0xFFFF0)
+
+enum tsi721_smsg_int_flag {
+ SMSG_INT_NONE = 0x00000000,
+ SMSG_INT_ECC_COR_CH = 0x000000ff,
+ SMSG_INT_ECC_NCOR_CH = 0x0000ff00,
+ SMSG_INT_ECC_COR = 0x00020000,
+ SMSG_INT_ECC_NCOR = 0x00040000,
+ SMSG_INT_UNS_RSP = 0x00800000,
+ SMSG_INT_ALL = 0x0006ffff
+};
+
+/* Structures */
+
+struct tsi721_bdma_chan {
+ int bd_num; /* number of buffer descriptors */
+ void *bd_base; /* start of DMA descriptors */
+ dma_addr_t bd_phys;
+ void *sts_base; /* start of DMA BD status FIFO */
+ dma_addr_t sts_phys;
+ int sts_size;
+};
+
+struct tsi721_imsg_ring {
+ u32 size;
+ /* VA/PA of data buffers for incoming messages */
+ void *buf_base;
+ dma_addr_t buf_phys;
+ /* VA/PA of circular free buffer list */
+ void *imfq_base;
+ dma_addr_t imfq_phys;
+ /* VA/PA of Inbound message descriptors */
+ void *imd_base;
+ dma_addr_t imd_phys;
+ /* Inbound Queue buffer pointers */
+ void *imq_base[TSI721_IMSGD_RING_SIZE];
+
+ u32 rx_slot;
+ void *dev_id;
+ u32 fq_wrptr;
+ u32 desc_rdptr;
+ spinlock_t lock;
+};
+
+struct tsi721_omsg_ring {
+ u32 size;
+ /* VA/PA of OB Msg descriptors */
+ void *omd_base;
+ dma_addr_t omd_phys;
+ /* VA/PA of OB Msg data buffers */
+ void *omq_base[TSI721_OMSGD_RING_SIZE];
+ dma_addr_t omq_phys[TSI721_OMSGD_RING_SIZE];
+ /* VA/PA of OB Msg descriptor status FIFO */
+ void *sts_base;
+ dma_addr_t sts_phys;
+ u32 sts_size; /* # of allocated status entries */
+ u32 sts_rdptr;
+
+ u32 tx_slot;
+ void *dev_id;
+ u32 wr_count;
+ spinlock_t lock;
+};
+
+enum tsi721_flags {
+ TSI721_USING_MSI = (1 << 0),
+ TSI721_USING_MSIX = (1 << 1),
+ TSI721_IMSGID_SET = (1 << 2),
+};
+
+#ifdef CONFIG_PCI_MSI
+/*
+ * MSI-X Table Entries (0 ... 69)
+ */
+#define TSI721_MSIX_DMACH_DONE(x) (0 + (x))
+#define TSI721_MSIX_DMACH_INT(x) (8 + (x))
+#define TSI721_MSIX_BDMA_INT 16
+#define TSI721_MSIX_OMSG_DONE(x) (17 + (x))
+#define TSI721_MSIX_OMSG_INT(x) (25 + (x))
+#define TSI721_MSIX_IMSG_DQ_RCV(x) (33 + (x))
+#define TSI721_MSIX_IMSG_INT(x) (41 + (x))
+#define TSI721_MSIX_MSG_INT 49
+#define TSI721_MSIX_SR2PC_IDBQ_RCV(x) (50 + (x))
+#define TSI721_MSIX_SR2PC_CH_INT(x) (58 + (x))
+#define TSI721_MSIX_SR2PC_INT 66
+#define TSI721_MSIX_PC2SR_INT 67
+#define TSI721_MSIX_SRIO_MAC_INT 68
+#define TSI721_MSIX_I2C_INT 69
+
+/* MSI-X vector and init table entry indexes */
+enum tsi721_msix_vect {
+ TSI721_VECT_IDB,
+ TSI721_VECT_PWRX, /* PW_RX is part of SRIO MAC Interrupt reporting */
+ TSI721_VECT_OMB0_DONE,
+ TSI721_VECT_OMB1_DONE,
+ TSI721_VECT_OMB2_DONE,
+ TSI721_VECT_OMB3_DONE,
+ TSI721_VECT_OMB0_INT,
+ TSI721_VECT_OMB1_INT,
+ TSI721_VECT_OMB2_INT,
+ TSI721_VECT_OMB3_INT,
+ TSI721_VECT_IMB0_RCV,
+ TSI721_VECT_IMB1_RCV,
+ TSI721_VECT_IMB2_RCV,
+ TSI721_VECT_IMB3_RCV,
+ TSI721_VECT_IMB0_INT,
+ TSI721_VECT_IMB1_INT,
+ TSI721_VECT_IMB2_INT,
+ TSI721_VECT_IMB3_INT,
+ TSI721_VECT_MAX
+};
+
+#define IRQ_DEVICE_NAME_MAX 64
+
+struct msix_irq {
+ u16 vector;
+ char irq_name[IRQ_DEVICE_NAME_MAX];
+};
+#endif /* CONFIG_PCI_MSI */
+
+struct tsi721_device {
+ struct pci_dev *pdev;
+ struct rio_mport *mport;
+ u32 flags;
+ void __iomem *regs;
+#ifdef CONFIG_PCI_MSI
+ struct msix_irq msix[TSI721_VECT_MAX];
+#endif
+ /* Doorbells */
+ void __iomem *odb_base;
+ void *idb_base;
+ dma_addr_t idb_dma;
+ struct work_struct idb_work;
+ u32 db_discard_count;
+
+ /* Inbound Port-Write */
+ struct work_struct pw_work;
+ struct kfifo pw_fifo;
+ spinlock_t pw_fifo_lock;
+ u32 pw_discard_count;
+
+ /* BDMA Engine */
+ struct tsi721_bdma_chan bdma[TSI721_DMA_CHNUM];
+
+ /* Inbound Messaging */
+ int imsg_init[TSI721_IMSG_CHNUM];
+ struct tsi721_imsg_ring imsg_ring[TSI721_IMSG_CHNUM];
+
+ /* Outbound Messaging */
+ int omsg_init[TSI721_OMSG_CHNUM];
+ struct tsi721_omsg_ring omsg_ring[TSI721_OMSG_CHNUM];
+};
+
+#endif
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index ebe77dd..2bebd79 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -516,7 +516,7 @@
return rdev;
cleanup:
- if (rio_is_switch(rdev))
+ if (rswitch)
kfree(rswitch->route_table);
kfree(rdev);
@@ -923,7 +923,7 @@
* rio_enum_complete- Tests if enumeration of a network is complete
* @port: Master port to send transaction
*
- * Tests the Component Tag CSR for non-zero value (enumeration
+ * Tests the PGCCSR discovered bit for non-zero value (enumeration
* complete flag). Return %1 if enumeration is complete or %0 if
* enumeration is incomplete.
*/
@@ -933,7 +933,7 @@
rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,
®val);
- return (regval & RIO_PORT_GEN_MASTER) ? 1 : 0;
+ return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;
}
/**
diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index d63fddb..e821b21 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -412,7 +412,7 @@
if (info->desc.id == res->start)
break;
}
- if ((i < 0) || (i > PM8607_ID_RG_MAX)) {
+ if (i == ARRAY_SIZE(pm8607_regulator_info)) {
dev_err(&pdev->dev, "Failed to find regulator %llu\n",
(unsigned long long)res->start);
return -EINVAL;
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index c7fd2c0..9713b1b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -64,6 +64,16 @@
If unsure, say no.
+config REGULATOR_GPIO
+ tristate "GPIO regulator support"
+ depends on GENERIC_GPIO
+ help
+ This driver provides support for regulators that can be
+ controlled via gpios.
+ It is capable of supporting current and voltage regulators
+ and the platform has to provide a mapping of GPIO-states
+ to target volts/amps.
+
config REGULATOR_BQ24022
tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC"
help
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 040d5aa..93a6318 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
+obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
diff --git a/drivers/regulator/aat2870-regulator.c b/drivers/regulator/aat2870-regulator.c
index cd41045..5abeb3a 100644
--- a/drivers/regulator/aat2870-regulator.c
+++ b/drivers/regulator/aat2870-regulator.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 9e4c123..67fa2a3 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1425,7 +1425,7 @@
ret = _regulator_enable(rdev);
mutex_unlock(&rdev->mutex);
- if (ret != 0)
+ if (ret != 0 && rdev->supply)
regulator_disable(rdev->supply);
return ret;
@@ -2971,6 +2971,43 @@
}
EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
+#ifdef CONFIG_DEBUG_FS
+static ssize_t supply_map_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ ssize_t len, ret = 0;
+ struct regulator_map *map;
+
+ if (!buf)
+ return -ENOMEM;
+
+ list_for_each_entry(map, ®ulator_map_list, list) {
+ len = snprintf(buf + ret, PAGE_SIZE - ret,
+ "%s -> %s.%s\n",
+ rdev_get_name(map->regulator), map->dev_name,
+ map->supply);
+ if (len >= 0)
+ ret += len;
+ if (ret > PAGE_SIZE) {
+ ret = PAGE_SIZE;
+ break;
+ }
+ }
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static const struct file_operations supply_map_fops = {
+ .read = supply_map_read_file,
+ .llseek = default_llseek,
+};
+#endif
+
static int __init regulator_init(void)
{
int ret;
@@ -2983,6 +3020,10 @@
pr_warn("regulator: Failed to create debugfs directory\n");
debugfs_root = NULL;
}
+
+ if (IS_ERR(debugfs_create_file("supply_map", 0444, debugfs_root,
+ NULL, &supply_map_fops)))
+ pr_warn("regulator: Failed to create supplies debugfs\n");
#endif
regulator_dummy_init();
diff --git a/drivers/regulator/db8500-prcmu.c b/drivers/regulator/db8500-prcmu.c
index 2bb8f45..2d014a1 100644
--- a/drivers/regulator/db8500-prcmu.c
+++ b/drivers/regulator/db8500-prcmu.c
@@ -13,7 +13,7 @@
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/db8500-prcmu.h>
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
new file mode 100644
index 0000000..f0acf52
--- /dev/null
+++ b/drivers/regulator/gpio-regulator.c
@@ -0,0 +1,358 @@
+/*
+ * gpio-regulator.c
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.c
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This is useful for systems with mixed controllable and
+ * non-controllable regulators, as well as for allowing testing on
+ * systems with no controllable regulators.
+ */
+
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+struct gpio_regulator_data {
+ struct regulator_desc desc;
+ struct regulator_dev *dev;
+
+ int enable_gpio;
+ bool enable_high;
+ bool is_enabled;
+ unsigned startup_delay;
+
+ struct gpio *gpios;
+ int nr_gpios;
+
+ struct gpio_regulator_state *states;
+ int nr_states;
+
+ int state;
+};
+
+static int gpio_regulator_is_enabled(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ return data->is_enabled;
+}
+
+static int gpio_regulator_enable(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ if (gpio_is_valid(data->enable_gpio)) {
+ gpio_set_value_cansleep(data->enable_gpio, data->enable_high);
+ data->is_enabled = true;
+ }
+
+ return 0;
+}
+
+static int gpio_regulator_disable(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ if (gpio_is_valid(data->enable_gpio)) {
+ gpio_set_value_cansleep(data->enable_gpio, !data->enable_high);
+ data->is_enabled = false;
+ }
+
+ return 0;
+}
+
+static int gpio_regulator_enable_time(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ return data->startup_delay;
+}
+
+static int gpio_regulator_get_value(struct regulator_dev *dev)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+ int ptr;
+
+ for (ptr = 0; ptr < data->nr_states; ptr++)
+ if (data->states[ptr].gpios == data->state)
+ return data->states[ptr].value;
+
+ return -EINVAL;
+}
+
+static int gpio_regulator_set_value(struct regulator_dev *dev,
+ int min, int max)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+ int ptr, target, state;
+
+ target = -1;
+ for (ptr = 0; ptr < data->nr_states; ptr++)
+ if (data->states[ptr].value >= min &&
+ data->states[ptr].value <= max)
+ target = data->states[ptr].gpios;
+
+ if (target < 0)
+ return -EINVAL;
+
+ for (ptr = 0; ptr < data->nr_gpios; ptr++) {
+ state = (target & (1 << ptr)) >> ptr;
+ gpio_set_value(data->gpios[ptr].gpio, state);
+ }
+ data->state = target;
+
+ return 0;
+}
+
+static int gpio_regulator_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV,
+ unsigned *selector)
+{
+ return gpio_regulator_set_value(dev, min_uV, max_uV);
+}
+
+static int gpio_regulator_list_voltage(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct gpio_regulator_data *data = rdev_get_drvdata(dev);
+
+ if (selector >= data->nr_states)
+ return -EINVAL;
+
+ return data->states[selector].value;
+}
+
+static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
+ int min_uA, int max_uA)
+{
+ return gpio_regulator_set_value(dev, min_uA, max_uA);
+}
+
+static struct regulator_ops gpio_regulator_voltage_ops = {
+ .is_enabled = gpio_regulator_is_enabled,
+ .enable = gpio_regulator_enable,
+ .disable = gpio_regulator_disable,
+ .enable_time = gpio_regulator_enable_time,
+ .get_voltage = gpio_regulator_get_value,
+ .set_voltage = gpio_regulator_set_voltage,
+ .list_voltage = gpio_regulator_list_voltage,
+};
+
+static struct regulator_ops gpio_regulator_current_ops = {
+ .is_enabled = gpio_regulator_is_enabled,
+ .enable = gpio_regulator_enable,
+ .disable = gpio_regulator_disable,
+ .enable_time = gpio_regulator_enable_time,
+ .get_current_limit = gpio_regulator_get_value,
+ .set_current_limit = gpio_regulator_set_current_limit,
+};
+
+static int __devinit gpio_regulator_probe(struct platform_device *pdev)
+{
+ struct gpio_regulator_config *config = pdev->dev.platform_data;
+ struct gpio_regulator_data *drvdata;
+ int ptr, ret, state;
+
+ drvdata = kzalloc(sizeof(struct gpio_regulator_data), GFP_KERNEL);
+ if (drvdata == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate device data\n");
+ return -ENOMEM;
+ }
+
+ drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
+ if (drvdata->desc.name == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate supply name\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ drvdata->gpios = kmemdup(config->gpios,
+ config->nr_gpios * sizeof(struct gpio),
+ GFP_KERNEL);
+ if (drvdata->gpios == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate gpio data\n");
+ ret = -ENOMEM;
+ goto err_name;
+ }
+
+ drvdata->states = kmemdup(config->states,
+ config->nr_states *
+ sizeof(struct gpio_regulator_state),
+ GFP_KERNEL);
+ if (drvdata->states == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate state data\n");
+ ret = -ENOMEM;
+ goto err_memgpio;
+ }
+ drvdata->nr_states = config->nr_states;
+
+ drvdata->desc.owner = THIS_MODULE;
+
+ /* handle regulator type*/
+ switch (config->type) {
+ case REGULATOR_VOLTAGE:
+ drvdata->desc.type = REGULATOR_VOLTAGE;
+ drvdata->desc.ops = &gpio_regulator_voltage_ops;
+ drvdata->desc.n_voltages = config->nr_states;
+ break;
+ case REGULATOR_CURRENT:
+ drvdata->desc.type = REGULATOR_CURRENT;
+ drvdata->desc.ops = &gpio_regulator_current_ops;
+ break;
+ default:
+ dev_err(&pdev->dev, "No regulator type set\n");
+ ret = -EINVAL;
+ goto err_memgpio;
+ break;
+ }
+
+ drvdata->enable_gpio = config->enable_gpio;
+ drvdata->startup_delay = config->startup_delay;
+
+ if (gpio_is_valid(config->enable_gpio)) {
+ drvdata->enable_high = config->enable_high;
+
+ ret = gpio_request(config->enable_gpio, config->supply_name);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator enable GPIO %d: %d\n",
+ config->enable_gpio, ret);
+ goto err_memstate;
+ }
+
+ /* set output direction without changing state
+ * to prevent glitch
+ */
+ if (config->enabled_at_boot) {
+ drvdata->is_enabled = true;
+ ret = gpio_direction_output(config->enable_gpio,
+ config->enable_high);
+ } else {
+ drvdata->is_enabled = false;
+ ret = gpio_direction_output(config->enable_gpio,
+ !config->enable_high);
+ }
+
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not configure regulator enable GPIO %d direction: %d\n",
+ config->enable_gpio, ret);
+ goto err_enablegpio;
+ }
+ } else {
+ /* Regulator without GPIO control is considered
+ * always enabled
+ */
+ drvdata->is_enabled = true;
+ }
+
+ drvdata->nr_gpios = config->nr_gpios;
+ ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator setting GPIOs: %d\n", ret);
+ goto err_enablegpio;
+ }
+
+ /* build initial state from gpio init data. */
+ state = 0;
+ for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
+ if (config->gpios[ptr].flags & GPIOF_OUT_INIT_HIGH)
+ state |= (1 << ptr);
+ }
+ drvdata->state = state;
+
+ drvdata->dev = regulator_register(&drvdata->desc, &pdev->dev,
+ config->init_data, drvdata);
+ if (IS_ERR(drvdata->dev)) {
+ ret = PTR_ERR(drvdata->dev);
+ dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
+ goto err_stategpio;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+ return 0;
+
+err_stategpio:
+ gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
+err_enablegpio:
+ if (gpio_is_valid(config->enable_gpio))
+ gpio_free(config->enable_gpio);
+err_memstate:
+ kfree(drvdata->states);
+err_memgpio:
+ kfree(drvdata->gpios);
+err_name:
+ kfree(drvdata->desc.name);
+err:
+ kfree(drvdata);
+ return ret;
+}
+
+static int __devexit gpio_regulator_remove(struct platform_device *pdev)
+{
+ struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
+
+ regulator_unregister(drvdata->dev);
+
+ gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
+
+ kfree(drvdata->states);
+ kfree(drvdata->gpios);
+
+ if (gpio_is_valid(drvdata->enable_gpio))
+ gpio_free(drvdata->enable_gpio);
+
+ kfree(drvdata->desc.name);
+ kfree(drvdata);
+
+ return 0;
+}
+
+static struct platform_driver gpio_regulator_driver = {
+ .probe = gpio_regulator_probe,
+ .remove = __devexit_p(gpio_regulator_remove),
+ .driver = {
+ .name = "gpio-regulator",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_regulator_init(void)
+{
+ return platform_driver_register(&gpio_regulator_driver);
+}
+subsys_initcall(gpio_regulator_init);
+
+static void __exit gpio_regulator_exit(void)
+{
+ platform_driver_unregister(&gpio_regulator_driver);
+}
+module_exit(gpio_regulator_exit);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("gpio voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-regulator");
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 30eb9e5..1062cf9 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -221,7 +221,7 @@
ret = (ret & MAX8649_RAMP_MASK) >> 5;
rate = (32 * 1000) >> ret; /* uV/uS */
- return (voltage / rate);
+ return DIV_ROUND_UP(voltage, rate);
}
static int max8649_set_mode(struct regulator_dev *rdev, unsigned int mode)
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index 486ed81..3883d85 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -26,7 +26,6 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/max8952.h>
-#include <linux/mutex.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -47,7 +46,6 @@
struct max8952_data {
struct i2c_client *client;
struct device *dev;
- struct mutex mutex;
struct max8952_platform_data *pdata;
struct regulator_dev *rdev;
@@ -208,7 +206,6 @@
max8952->client = client;
max8952->dev = &client->dev;
max8952->pdata = pdata;
- mutex_init(&max8952->mutex);
max8952->rdev = regulator_register(®ulator, max8952->dev,
&pdata->reg_data, max8952);
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 730f43a..cb2841f 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -336,9 +336,9 @@
{
struct mc13xxx_regulator_priv *priv;
struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
- struct mc13783_regulator_platform_data *pdata =
+ struct mc13xxx_regulator_platform_data *pdata =
dev_get_platdata(&pdev->dev);
- struct mc13783_regulator_init_data *init_data;
+ struct mc13xxx_regulator_init_data *init_data;
int i, ret;
dev_dbg(&pdev->dev, "%s id %d\n", __func__, pdev->id);
@@ -381,7 +381,7 @@
static int __devexit mc13783_regulator_remove(struct platform_device *pdev)
{
struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev);
- struct mc13783_regulator_platform_data *pdata =
+ struct mc13xxx_regulator_platform_data *pdata =
dev_get_platdata(&pdev->dev);
int i;
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 701a590..9fb4c7b 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -63,6 +63,13 @@
#define TPS65023_REG_CTRL_LDO2_EN BIT(2)
#define TPS65023_REG_CTRL_LDO1_EN BIT(1)
+/* REG_CTRL2 bitfields */
+#define TPS65023_REG_CTRL2_GO BIT(7)
+#define TPS65023_REG_CTRL2_CORE_ADJ BIT(6)
+#define TPS65023_REG_CTRL2_DCDC2 BIT(2)
+#define TPS65023_REG_CTRL2_DCDC1 BIT(1)
+#define TPS65023_REG_CTRL2_DCDC3 BIT(0)
+
/* LDO_CTRL bitfields */
#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0xF0 >> ((ldo_id)*4))
@@ -85,7 +92,7 @@
#define TPS65023_MAX_REG_ID TPS65023_LDO_2
/* Supported voltage values for regulators */
-static const u16 VDCDC1_VSEL_table[] = {
+static const u16 VCORE_VSEL_table[] = {
800, 825, 850, 875,
900, 925, 950, 975,
1000, 1025, 1050, 1075,
@@ -96,20 +103,29 @@
1500, 1525, 1550, 1600,
};
-static const u16 LDO1_VSEL_table[] = {
+/* Supported voltage values for LDO regulators for tps65020 */
+static const u16 TPS65020_LDO1_VSEL_table[] = {
+ 1000, 1050, 1100, 1300,
+ 1800, 2500, 3000, 3300,
+};
+
+static const u16 TPS65020_LDO2_VSEL_table[] = {
+ 1000, 1050, 1100, 1300,
+ 1800, 2500, 3000, 3300,
+};
+
+/* Supported voltage values for LDO regulators
+ * for tps65021 and tps65023 */
+static const u16 TPS65023_LDO1_VSEL_table[] = {
1000, 1100, 1300, 1800,
2200, 2600, 2800, 3150,
};
-static const u16 LDO2_VSEL_table[] = {
+static const u16 TPS65023_LDO2_VSEL_table[] = {
1050, 1200, 1300, 1800,
2500, 2800, 3000, 3300,
};
-static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDC1_VSEL_table),
- 0, 0, ARRAY_SIZE(LDO1_VSEL_table),
- ARRAY_SIZE(LDO2_VSEL_table)};
-
/* Regulator specific details */
struct tps_info {
const char *name;
@@ -127,6 +143,13 @@
struct regulator_dev *rdev[TPS65023_NUM_REGULATOR];
const struct tps_info *info[TPS65023_NUM_REGULATOR];
struct regmap *regmap;
+ u8 core_regulator;
+};
+
+/* Struct passed as driver data */
+struct tps_driver_data {
+ const struct tps_info *info;
+ u8 core_regulator;
};
static int tps_65023_set_bits(struct tps_pmic *tps, u8 reg, u8 mask)
@@ -253,7 +276,7 @@
if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
return -EINVAL;
- if (dcdc == TPS65023_DCDC_1) {
+ if (dcdc == tps->core_regulator) {
data = tps_65023_reg_read(tps, TPS65023_REG_DEF_CORE);
if (data < 0)
return data;
@@ -270,10 +293,10 @@
struct tps_pmic *tps = rdev_get_drvdata(dev);
int dcdc = rdev_get_id(dev);
int vsel;
+ int ret;
- if (dcdc != TPS65023_DCDC_1)
+ if (dcdc != tps->core_regulator)
return -EINVAL;
-
if (min_uV < tps->info[dcdc]->min_uV
|| min_uV > tps->info[dcdc]->max_uV)
return -EINVAL;
@@ -292,11 +315,21 @@
*selector = vsel;
- /* write to the register in case we found a match */
if (vsel == tps->info[dcdc]->table_len)
- return -EINVAL;
- else
- return tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+ goto failed;
+
+ ret = tps_65023_reg_write(tps, TPS65023_REG_DEF_CORE, vsel);
+
+ /* Tell the chip that we have changed the value in DEFCORE
+ * and its time to update the core voltage
+ */
+ tps_65023_set_bits(tps, TPS65023_REG_CON_CTRL2,
+ TPS65023_REG_CTRL2_GO);
+
+ return ret;
+
+failed:
+ return -EINVAL;
}
static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
@@ -362,7 +395,7 @@
if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
return -EINVAL;
- if (dcdc == TPS65023_DCDC_1) {
+ if (dcdc == tps->core_regulator) {
if (selector >= tps->info[dcdc]->table_len)
return -EINVAL;
else
@@ -414,7 +447,8 @@
static int __devinit tps_65023_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct tps_info *info = (void *)id->driver_data;
+ const struct tps_driver_data *drv_data = (void *)id->driver_data;
+ const struct tps_info *info = drv_data->info;
struct regulator_init_data *init_data;
struct regulator_dev *rdev;
struct tps_pmic *tps;
@@ -446,6 +480,7 @@
/* common for all regulators */
tps->client = client;
+ tps->core_regulator = drv_data->core_regulator;
for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
/* Store regulator specific information */
@@ -453,7 +488,7 @@
tps->desc[i].name = info->name;
tps->desc[i].id = i;
- tps->desc[i].n_voltages = num_voltages[i];
+ tps->desc[i].n_voltages = info->table_len;
tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
&tps65023_ldo_ops : &tps65023_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
@@ -475,6 +510,14 @@
i2c_set_clientdata(client, tps);
+ /* Enable setting output voltage by I2C */
+ tps_65023_clear_bits(tps, TPS65023_REG_CON_CTRL2,
+ TPS65023_REG_CTRL2_CORE_ADJ);
+
+ /* Enable setting output voltage by I2C */
+ tps_65023_clear_bits(tps, TPS65023_REG_CON_CTRL2,
+ TPS65023_REG_CTRL2_CORE_ADJ);
+
return 0;
fail:
@@ -507,13 +550,86 @@
return 0;
}
+static const struct tps_info tps65020_regs[] = {
+ {
+ .name = "VDCDC1",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC2",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC3",
+ .min_uV = 800000,
+ .max_uV = 1600000,
+ .table_len = ARRAY_SIZE(VCORE_VSEL_table),
+ .table = VCORE_VSEL_table,
+ },
+
+ {
+ .name = "LDO1",
+ .min_uV = 1000000,
+ .max_uV = 3150000,
+ .table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
+ .table = TPS65020_LDO1_VSEL_table,
+ },
+ {
+ .name = "LDO2",
+ .min_uV = 1050000,
+ .max_uV = 3300000,
+ .table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
+ .table = TPS65020_LDO2_VSEL_table,
+ },
+};
+
+static const struct tps_info tps65021_regs[] = {
+ {
+ .name = "VDCDC1",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC2",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .fixed = 1,
+ },
+ {
+ .name = "VDCDC3",
+ .min_uV = 800000,
+ .max_uV = 1600000,
+ .table_len = ARRAY_SIZE(VCORE_VSEL_table),
+ .table = VCORE_VSEL_table,
+ },
+ {
+ .name = "LDO1",
+ .min_uV = 1000000,
+ .max_uV = 3150000,
+ .table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+ .table = TPS65023_LDO1_VSEL_table,
+ },
+ {
+ .name = "LDO2",
+ .min_uV = 1050000,
+ .max_uV = 3300000,
+ .table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+ .table = TPS65023_LDO2_VSEL_table,
+ },
+};
+
static const struct tps_info tps65023_regs[] = {
{
.name = "VDCDC1",
.min_uV = 800000,
.max_uV = 1600000,
- .table_len = ARRAY_SIZE(VDCDC1_VSEL_table),
- .table = VDCDC1_VSEL_table,
+ .table_len = ARRAY_SIZE(VCORE_VSEL_table),
+ .table = VCORE_VSEL_table,
},
{
.name = "VDCDC2",
@@ -531,23 +647,40 @@
.name = "LDO1",
.min_uV = 1000000,
.max_uV = 3150000,
- .table_len = ARRAY_SIZE(LDO1_VSEL_table),
- .table = LDO1_VSEL_table,
+ .table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
+ .table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
.min_uV = 1050000,
.max_uV = 3300000,
- .table_len = ARRAY_SIZE(LDO2_VSEL_table),
- .table = LDO2_VSEL_table,
+ .table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
+ .table = TPS65023_LDO2_VSEL_table,
},
};
+static struct tps_driver_data tps65020_drv_data = {
+ .info = tps65020_regs,
+ .core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65021_drv_data = {
+ .info = tps65021_regs,
+ .core_regulator = TPS65023_DCDC_3,
+};
+
+static struct tps_driver_data tps65023_drv_data = {
+ .info = tps65023_regs,
+ .core_regulator = TPS65023_DCDC_1,
+};
+
static const struct i2c_device_id tps_65023_id[] = {
{.name = "tps65023",
- .driver_data = (unsigned long) tps65023_regs,},
+ .driver_data = (unsigned long) &tps65023_drv_data},
{.name = "tps65021",
- .driver_data = (unsigned long) tps65023_regs,},
+ .driver_data = (unsigned long) &tps65021_drv_data,},
+ {.name = "tps65020",
+ .driver_data = (unsigned long) &tps65020_drv_data},
{ },
};
diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index bfffabc..bdef703 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -90,12 +90,6 @@
3000, 3100, 3200, 3300,
};
-static unsigned int num_voltages[] = {ARRAY_SIZE(VDCDCx_VSEL_table),
- ARRAY_SIZE(VDCDCx_VSEL_table),
- ARRAY_SIZE(VDCDCx_VSEL_table),
- ARRAY_SIZE(LDO1_VSEL_table),
- ARRAY_SIZE(LDO2_VSEL_table)};
-
struct tps_info {
const char *name;
unsigned min_uV;
@@ -598,7 +592,7 @@
tps->desc[i].name = info->name;
tps->desc[i].id = i;
- tps->desc[i].n_voltages = num_voltages[i];
+ tps->desc[i].n_voltages = info->table_len;
tps->desc[i].ops = (i > TPS6507X_DCDC_3 ?
&tps6507x_pmic_ldo_ops : &tps6507x_pmic_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index bb04a75..dbcf09d 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -332,6 +332,36 @@
1 << ri->enable_bit[1]);
}
+static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev)
+{
+ struct device *parent = pdev->dev.parent;
+ struct regulator_init_data *p = pdev->dev.platform_data;
+ struct tps6586x_settings *setting = p->driver_data;
+ uint8_t reg;
+
+ if (setting == NULL)
+ return 0;
+
+ if (!(setting->slew_rate & TPS6586X_SLEW_RATE_SET))
+ return 0;
+
+ /* only SM0 and SM1 can have the slew rate settings */
+ switch (pdev->id) {
+ case TPS6586X_ID_SM_0:
+ reg = TPS6586X_SM0SL;
+ break;
+ case TPS6586X_ID_SM_1:
+ reg = TPS6586X_SM1SL;
+ break;
+ default:
+ dev_warn(&pdev->dev, "Only SM0/SM1 can set slew rate\n");
+ return -EINVAL;
+ }
+
+ return tps6586x_write(parent, reg,
+ setting->slew_rate & TPS6586X_SLEW_RATE_MASK);
+}
+
static inline struct tps6586x_regulator *find_regulator_info(int id)
{
struct tps6586x_regulator *ri;
@@ -374,7 +404,7 @@
platform_set_drvdata(pdev, rdev);
- return 0;
+ return tps6586x_regulator_set_slew_rate(pdev);
}
static int __devexit tps6586x_regulator_remove(struct platform_device *pdev)
diff --git a/drivers/regulator/tps65912-regulator.c b/drivers/regulator/tps65912-regulator.c
index 3a9313e..39d4a17 100644
--- a/drivers/regulator/tps65912-regulator.c
+++ b/drivers/regulator/tps65912-regulator.c
@@ -43,8 +43,6 @@
#define TPS65912_REG_LDO9 12
#define TPS65912_REG_LDO10 13
-#define TPS65912_MAX_REG_ID TPS65912_REG_LDO_10
-
/* Number of step-down converters available */
#define TPS65912_NUM_DCDC 4
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 5a538fc..53eb4e5 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -8,7 +8,7 @@
menuconfig RTC_CLASS
bool "Real Time Clock"
default n
- depends on !S390
+ depends on !S390 && !UML
select RTC_LIB
help
Generic RTC class support. If you say yes here, you will
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index 01a7df5..e8326f2 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -21,16 +21,13 @@
#include "rtc-core.h"
-static DEFINE_IDR(rtc_idr);
-static DEFINE_MUTEX(idr_lock);
+static DEFINE_IDA(rtc_ida);
struct class *rtc_class;
static void rtc_device_release(struct device *dev)
{
struct rtc_device *rtc = to_rtc_device(dev);
- mutex_lock(&idr_lock);
- idr_remove(&rtc_idr, rtc->id);
- mutex_unlock(&idr_lock);
+ ida_simple_remove(&rtc_ida, rtc->id);
kfree(rtc);
}
@@ -146,25 +143,16 @@
struct rtc_wkalrm alrm;
int id, err;
- if (idr_pre_get(&rtc_idr, GFP_KERNEL) == 0) {
- err = -ENOMEM;
+ id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ err = id;
goto exit;
}
-
- mutex_lock(&idr_lock);
- err = idr_get_new(&rtc_idr, NULL, &id);
- mutex_unlock(&idr_lock);
-
- if (err < 0)
- goto exit;
-
- id = id & MAX_ID_MASK;
-
rtc = kzalloc(sizeof(struct rtc_device), GFP_KERNEL);
if (rtc == NULL) {
err = -ENOMEM;
- goto exit_idr;
+ goto exit_ida;
}
rtc->id = id;
@@ -222,10 +210,8 @@
exit_kfree:
kfree(rtc);
-exit_idr:
- mutex_lock(&idr_lock);
- idr_remove(&rtc_idr, id);
- mutex_unlock(&idr_lock);
+exit_ida:
+ ida_simple_remove(&rtc_ida, id);
exit:
dev_err(dev, "rtc core: unable to register %s, err = %d\n",
@@ -276,7 +262,7 @@
{
rtc_dev_exit();
class_destroy(rtc_class);
- idr_destroy(&rtc_idr);
+ ida_destroy(&rtc_ida);
}
subsys_initcall(rtc_init);
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index b2005b4..62b0763 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -34,6 +34,7 @@
ds_1388,
ds_3231,
m41t00,
+ mcp7941x,
rx_8025,
// rs5c372 too? different address...
};
@@ -43,6 +44,7 @@
#define DS1307_REG_SECS 0x00 /* 00-59 */
# define DS1307_BIT_CH 0x80
# define DS1340_BIT_nEOSC 0x80
+# define MCP7941X_BIT_ST 0x80
#define DS1307_REG_MIN 0x01 /* 00-59 */
#define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */
# define DS1307_BIT_12HR 0x40 /* in REG_HOUR */
@@ -50,6 +52,7 @@
# define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */
# define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */
#define DS1307_REG_WDAY 0x03 /* 01-07 */
+# define MCP7941X_BIT_VBATEN 0x08
#define DS1307_REG_MDAY 0x04 /* 01-31 */
#define DS1307_REG_MONTH 0x05 /* 01-12 */
# define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */
@@ -137,6 +140,8 @@
},
[m41t00] = {
},
+[mcp7941x] = {
+},
[rx_8025] = {
}, };
@@ -149,6 +154,7 @@
{ "ds1340", ds_1340 },
{ "ds3231", ds_3231 },
{ "m41t00", m41t00 },
+ { "mcp7941x", mcp7941x },
{ "pt7c4338", ds_1307 },
{ "rx8025", rx_8025 },
{ }
@@ -365,6 +371,10 @@
buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN
| DS1340_BIT_CENTURY;
break;
+ case mcp7941x:
+ buf[DS1307_REG_SECS] |= MCP7941X_BIT_ST;
+ buf[DS1307_REG_WDAY] |= MCP7941X_BIT_VBATEN;
+ break;
default:
break;
}
@@ -809,6 +819,23 @@
dev_warn(&client->dev, "SET TIME!\n");
}
break;
+ case mcp7941x:
+ /* make sure that the backup battery is enabled */
+ if (!(ds1307->regs[DS1307_REG_WDAY] & MCP7941X_BIT_VBATEN)) {
+ i2c_smbus_write_byte_data(client, DS1307_REG_WDAY,
+ ds1307->regs[DS1307_REG_WDAY]
+ | MCP7941X_BIT_VBATEN);
+ }
+
+ /* clock halted? turn it on, so clock can tick. */
+ if (!(tmp & MCP7941X_BIT_ST)) {
+ i2c_smbus_write_byte_data(client, DS1307_REG_SECS,
+ MCP7941X_BIT_ST);
+ dev_warn(&client->dev, "SET TIME!\n");
+ goto read_rtc;
+ }
+
+ break;
case rx_8025:
case ds_1337:
case ds_1339:
diff --git a/drivers/rtc/rtc-mc13xxx.c b/drivers/rtc/rtc-mc13xxx.c
index a1a278b..9d0c3b4 100644
--- a/drivers/rtc/rtc-mc13xxx.c
+++ b/drivers/rtc/rtc-mc13xxx.c
@@ -309,7 +309,7 @@
return IRQ_HANDLED;
}
-static int __devinit mc13xxx_rtc_probe(struct platform_device *pdev)
+static int __init mc13xxx_rtc_probe(struct platform_device *pdev)
{
int ret;
struct mc13xxx_rtc *priv;
@@ -378,7 +378,7 @@
return ret;
}
-static int __devexit mc13xxx_rtc_remove(struct platform_device *pdev)
+static int __exit mc13xxx_rtc_remove(struct platform_device *pdev)
{
struct mc13xxx_rtc *priv = platform_get_drvdata(pdev);
@@ -410,7 +410,7 @@
static struct platform_driver mc13xxx_rtc_driver = {
.id_table = mc13xxx_rtc_idtable,
- .remove = __devexit_p(mc13xxx_rtc_remove),
+ .remove = __exit_p(mc13xxx_rtc_remove),
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c
index 33b2ed4..e0ada37 100644
--- a/drivers/sh/intc/chip.c
+++ b/drivers/sh/intc/chip.c
@@ -202,11 +202,16 @@
if (!value)
return -EINVAL;
+ value &= ~SENSE_VALID_FLAG;
+
ihp = intc_find_irq(d->sense, d->nr_sense, irq);
if (ihp) {
+ /* PINT has 2-bit sense registers, should fail on EDGE_BOTH */
+ if (value >= (1 << _INTC_WIDTH(ihp->handle)))
+ return -EINVAL;
+
addr = INTC_REG(d, _INTC_ADDR_E(ihp->handle), 0);
- intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle,
- value & ~SENSE_VALID_FLAG);
+ intc_reg_fns[_INTC_FN(ihp->handle)](addr, ihp->handle, value);
}
return 0;
diff --git a/drivers/sh/intc/userimask.c b/drivers/sh/intc/userimask.c
index e32304b..56bf933 100644
--- a/drivers/sh/intc/userimask.c
+++ b/drivers/sh/intc/userimask.c
@@ -13,6 +13,7 @@
#include <linux/sysdev.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/stat.h>
#include <asm/sizes.h>
#include "internals.h"
diff --git a/drivers/sh/pfc.c b/drivers/sh/pfc.c
index 75934e3..e67fe17 100644
--- a/drivers/sh/pfc.c
+++ b/drivers/sh/pfc.c
@@ -217,7 +217,7 @@
if (!r_width)
break;
- for (n = 0; n < (r_width / f_width) * 1 << f_width; n++) {
+ for (n = 0; n < (r_width / f_width) * (1 << f_width); n++) {
if (config_reg->enum_ids[n] == enum_id) {
*crp = config_reg;
*indexp = n;
@@ -577,6 +577,32 @@
sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
}
+static int sh_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct pinmux_info *gpioc = chip_to_pinmux(chip);
+ pinmux_enum_t enum_id;
+ pinmux_enum_t *enum_ids;
+ int i, k, pos;
+
+ pos = 0;
+ enum_id = 0;
+ while (1) {
+ pos = get_gpio_enum_id(gpioc, offset, pos, &enum_id);
+ if (pos <= 0 || !enum_id)
+ break;
+
+ for (i = 0; i < gpioc->gpio_irq_size; i++) {
+ enum_ids = gpioc->gpio_irq[i].enum_ids;
+ for (k = 0; enum_ids[k]; k++) {
+ if (enum_ids[k] == enum_id)
+ return gpioc->gpio_irq[i].irq;
+ }
+ }
+ }
+
+ return -ENOSYS;
+}
+
int register_pinmux(struct pinmux_info *pip)
{
struct gpio_chip *chip = &pip->chip;
@@ -592,6 +618,7 @@
chip->get = sh_gpio_get;
chip->direction_output = sh_gpio_direction_output;
chip->set = sh_gpio_set;
+ chip->to_irq = sh_gpio_to_irq;
WARN_ON(pip->first_gpio != 0); /* needs testing */
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 52e2900..a1fd73d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -88,7 +88,7 @@
config SPI_AU1550
tristate "Au1550/Au12x0 SPI Controller"
- depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
+ depends on MIPS_ALCHEMY && EXPERIMENTAL
select SPI_BITBANG
help
If you say yes to this option, support will be included for the
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d132c27..25cdff3 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -30,12 +30,6 @@
source "drivers/staging/slicoss/Kconfig"
-source "drivers/staging/go7007/Kconfig"
-
-source "drivers/staging/cx25821/Kconfig"
-
-source "drivers/staging/cxd2099/Kconfig"
-
source "drivers/staging/usbip/Kconfig"
source "drivers/staging/winbond/Kconfig"
@@ -104,20 +98,12 @@
source "drivers/staging/sm7xx/Kconfig"
-source "drivers/staging/dt3155v4l/Kconfig"
-
source "drivers/staging/crystalhd/Kconfig"
source "drivers/staging/cxt1e1/Kconfig"
source "drivers/staging/xgifb/Kconfig"
-source "drivers/staging/lirc/Kconfig"
-
-source "drivers/staging/easycap/Kconfig"
-
-source "drivers/staging/solo6x10/Kconfig"
-
source "drivers/staging/tidspbridge/Kconfig"
source "drivers/staging/quickstart/Kconfig"
@@ -144,4 +130,6 @@
source "drivers/staging/nvec/Kconfig"
+source "drivers/staging/media/Kconfig"
+
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 936b7c2..a25f3f2 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -4,12 +4,9 @@
obj-$(CONFIG_STAGING) += staging.o
obj-y += serial/
+obj-y += media/
obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/
-obj-$(CONFIG_VIDEO_GO7007) += go7007/
-obj-$(CONFIG_VIDEO_CX25821) += cx25821/
-obj-$(CONFIG_DVB_CXD2099) += cxd2099/
-obj-$(CONFIG_LIRC_STAGING) += lirc/
obj-$(CONFIG_USBIP_CORE) += usbip/
obj-$(CONFIG_W35UND) += winbond/
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
@@ -44,12 +41,9 @@
obj-$(CONFIG_WLAGS49_H2) += wlags49_h2/
obj-$(CONFIG_WLAGS49_H25) += wlags49_h25/
obj-$(CONFIG_FB_SM7XX) += sm7xx/
-obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/
obj-$(CONFIG_CRYSTALHD) += crystalhd/
obj-$(CONFIG_CXT1E1) += cxt1e1/
obj-$(CONFIG_FB_XGI) += xgifb/
-obj-$(CONFIG_EASYCAP) += easycap/
-obj-$(CONFIG_SOLO6X10) += solo6x10/
obj-$(CONFIG_TIDSPBRIDGE) += tidspbridge/
obj-$(CONFIG_ACPI_QUICKSTART) += quickstart/
obj-$(CONFIG_SBE_2T3E3) += sbe-2t3e3/
diff --git a/drivers/staging/cx25821/README b/drivers/staging/cx25821/README
deleted file mode 100644
index a9ba50b..0000000
--- a/drivers/staging/cx25821/README
+++ /dev/null
@@ -1,6 +0,0 @@
-Todo:
- - checkpatch.pl cleanups
- - sparse cleanups
-
-Please send patches to linux-media@vger.kernel.org
-
diff --git a/drivers/staging/media/Kconfig b/drivers/staging/media/Kconfig
new file mode 100644
index 0000000..7e5caa3
--- /dev/null
+++ b/drivers/staging/media/Kconfig
@@ -0,0 +1,37 @@
+menuconfig STAGING_MEDIA
+ bool "Media staging drivers"
+ default n
+ ---help---
+ This option allows you to select a number of media drivers that
+ don't have the "normal" Linux kernel quality level.
+ Most of them don't follow properly the V4L, DVB and/or RC API's,
+ so, they won't likely work fine with the existing applications.
+ That also means that, one fixed, their API's will change to match
+ the existing ones.
+
+ If you wish to work on these drivers, to help improve them, or
+ to report problems you have with them, please use the
+ linux-media@vger.kernel.org mailing list.
+
+ If in doubt, say N here.
+
+
+if STAGING_MEDIA
+
+# Please keep them in alphabetic order
+source "drivers/staging/media/as102/Kconfig"
+
+source "drivers/staging/media/cxd2099/Kconfig"
+
+source "drivers/staging/media/dt3155v4l/Kconfig"
+
+source "drivers/staging/media/easycap/Kconfig"
+
+source "drivers/staging/media/go7007/Kconfig"
+
+source "drivers/staging/media/solo6x10/Kconfig"
+
+# Keep LIRC at the end, as it has sub-menus
+source "drivers/staging/media/lirc/Kconfig"
+
+endif
diff --git a/drivers/staging/media/Makefile b/drivers/staging/media/Makefile
new file mode 100644
index 0000000..c69124c
--- /dev/null
+++ b/drivers/staging/media/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_DVB_AS102) += as102/
+obj-$(CONFIG_DVB_CXD2099) += cxd2099/
+obj-$(CONFIG_EASYCAP) += easycap/
+obj-$(CONFIG_LIRC_STAGING) += lirc/
+obj-$(CONFIG_SOLO6X10) += solo6x10/
+obj-$(CONFIG_VIDEO_DT3155) += dt3155v4l/
+obj-$(CONFIG_VIDEO_GO7007) += go7007/
diff --git a/drivers/staging/media/as102/Kconfig b/drivers/staging/media/as102/Kconfig
new file mode 100644
index 0000000..5865029
--- /dev/null
+++ b/drivers/staging/media/as102/Kconfig
@@ -0,0 +1,7 @@
+config DVB_AS102
+ tristate "Abilis AS102 DVB receiver"
+ depends on DVB_CORE && USB && I2C && INPUT
+ help
+ Choose Y or M here if you have a device containing an AS102
+
+ To compile this driver as a module, choose M here
diff --git a/drivers/staging/media/as102/Makefile b/drivers/staging/media/as102/Makefile
new file mode 100644
index 0000000..e7dbb6f
--- /dev/null
+++ b/drivers/staging/media/as102/Makefile
@@ -0,0 +1,6 @@
+dvb-as102-objs := as102_drv.o as102_fw.o as10x_cmd.o as10x_cmd_stream.o \
+ as102_fe.o as102_usb_drv.o as10x_cmd_cfg.o
+
+obj-$(CONFIG_DVB_AS102) += dvb-as102.o
+
+EXTRA_CFLAGS += -DCONFIG_AS102_USB -Idrivers/media/dvb/dvb-core
diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c
new file mode 100644
index 0000000..d335c7d
--- /dev/null
+++ b/drivers/staging/media/as102/as102_drv.c
@@ -0,0 +1,351 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/kref.h>
+#include <asm/uaccess.h>
+#include <linux/usb.h>
+
+/* header file for Usb device driver*/
+#include "as102_drv.h"
+#include "as102_fw.h"
+#include "dvbdev.h"
+
+int debug;
+module_param_named(debug, debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)");
+
+int dual_tuner;
+module_param_named(dual_tuner, dual_tuner, int, 0644);
+MODULE_PARM_DESC(dual_tuner, "Activate Dual-Tuner config (default: off)");
+
+static int fw_upload = 1;
+module_param_named(fw_upload, fw_upload, int, 0644);
+MODULE_PARM_DESC(fw_upload, "Turn on/off default FW upload (default: on)");
+
+static int pid_filtering;
+module_param_named(pid_filtering, pid_filtering, int, 0644);
+MODULE_PARM_DESC(pid_filtering, "Activate HW PID filtering (default: off)");
+
+static int ts_auto_disable;
+module_param_named(ts_auto_disable, ts_auto_disable, int, 0644);
+MODULE_PARM_DESC(ts_auto_disable, "Stream Auto Enable on FW (default: off)");
+
+int elna_enable = 1;
+module_param_named(elna_enable, elna_enable, int, 0644);
+MODULE_PARM_DESC(elna_enable, "Activate eLNA (default: on)");
+
+#ifdef DVB_DEFINE_MOD_OPT_ADAPTER_NR
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+#endif
+
+static void as102_stop_stream(struct as102_dev_t *dev)
+{
+ struct as102_bus_adapter_t *bus_adap;
+
+ if (dev != NULL)
+ bus_adap = &dev->bus_adap;
+ else
+ return;
+
+ if (bus_adap->ops->stop_stream != NULL)
+ bus_adap->ops->stop_stream(dev);
+
+ if (ts_auto_disable) {
+ if (mutex_lock_interruptible(&dev->bus_adap.lock))
+ return;
+
+ if (as10x_cmd_stop_streaming(bus_adap) < 0)
+ dprintk(debug, "as10x_cmd_stop_streaming failed\n");
+
+ mutex_unlock(&dev->bus_adap.lock);
+ }
+}
+
+static int as102_start_stream(struct as102_dev_t *dev)
+{
+ struct as102_bus_adapter_t *bus_adap;
+ int ret = -EFAULT;
+
+ if (dev != NULL)
+ bus_adap = &dev->bus_adap;
+ else
+ return ret;
+
+ if (bus_adap->ops->start_stream != NULL)
+ ret = bus_adap->ops->start_stream(dev);
+
+ if (ts_auto_disable) {
+ if (mutex_lock_interruptible(&dev->bus_adap.lock))
+ return -EFAULT;
+
+ ret = as10x_cmd_start_streaming(bus_adap);
+
+ mutex_unlock(&dev->bus_adap.lock);
+ }
+
+ return ret;
+}
+
+static int as10x_pid_filter(struct as102_dev_t *dev,
+ int index, u16 pid, int onoff) {
+
+ struct as102_bus_adapter_t *bus_adap = &dev->bus_adap;
+ int ret = -EFAULT;
+
+ ENTER();
+
+ if (mutex_lock_interruptible(&dev->bus_adap.lock)) {
+ dprintk(debug, "mutex_lock_interruptible(lock) failed !\n");
+ return -EBUSY;
+ }
+
+ switch (onoff) {
+ case 0:
+ ret = as10x_cmd_del_PID_filter(bus_adap, (uint16_t) pid);
+ dprintk(debug, "DEL_PID_FILTER([%02d] 0x%04x) ret = %d\n",
+ index, pid, ret);
+ break;
+ case 1:
+ {
+ struct as10x_ts_filter filter;
+
+ filter.type = TS_PID_TYPE_TS;
+ filter.idx = 0xFF;
+ filter.pid = pid;
+
+ ret = as10x_cmd_add_PID_filter(bus_adap, &filter);
+ dprintk(debug, "ADD_PID_FILTER([%02d -> %02d], 0x%04x) ret = %d\n",
+ index, filter.idx, filter.pid, ret);
+ break;
+ }
+ }
+
+ mutex_unlock(&dev->bus_adap.lock);
+
+ LEAVE();
+ return ret;
+}
+
+static int as102_dvb_dmx_start_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ int ret = 0;
+ struct dvb_demux *demux = dvbdmxfeed->demux;
+ struct as102_dev_t *as102_dev = demux->priv;
+
+ ENTER();
+
+ if (mutex_lock_interruptible(&as102_dev->sem))
+ return -ERESTARTSYS;
+
+ if (pid_filtering) {
+ as10x_pid_filter(as102_dev,
+ dvbdmxfeed->index, dvbdmxfeed->pid, 1);
+ }
+
+ if (as102_dev->streaming++ == 0)
+ ret = as102_start_stream(as102_dev);
+
+ mutex_unlock(&as102_dev->sem);
+ LEAVE();
+ return ret;
+}
+
+static int as102_dvb_dmx_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+ struct dvb_demux *demux = dvbdmxfeed->demux;
+ struct as102_dev_t *as102_dev = demux->priv;
+
+ ENTER();
+
+ if (mutex_lock_interruptible(&as102_dev->sem))
+ return -ERESTARTSYS;
+
+ if (--as102_dev->streaming == 0)
+ as102_stop_stream(as102_dev);
+
+ if (pid_filtering) {
+ as10x_pid_filter(as102_dev,
+ dvbdmxfeed->index, dvbdmxfeed->pid, 0);
+ }
+
+ mutex_unlock(&as102_dev->sem);
+ LEAVE();
+ return 0;
+}
+
+int as102_dvb_register(struct as102_dev_t *as102_dev)
+{
+ int ret = 0;
+ ENTER();
+
+ ret = dvb_register_adapter(&as102_dev->dvb_adap,
+ as102_dev->name,
+ THIS_MODULE,
+#if defined(CONFIG_AS102_USB)
+ &as102_dev->bus_adap.usb_dev->dev
+#elif defined(CONFIG_AS102_SPI)
+ &as102_dev->bus_adap.spi_dev->dev
+#else
+#error >>> dvb_register_adapter <<<
+#endif
+#ifdef DVB_DEFINE_MOD_OPT_ADAPTER_NR
+ , adapter_nr
+#endif
+ );
+ if (ret < 0) {
+ err("%s: dvb_register_adapter() failed (errno = %d)",
+ __func__, ret);
+ goto failed;
+ }
+
+ as102_dev->dvb_dmx.priv = as102_dev;
+ as102_dev->dvb_dmx.filternum = pid_filtering ? 16 : 256;
+ as102_dev->dvb_dmx.feednum = 256;
+ as102_dev->dvb_dmx.start_feed = as102_dvb_dmx_start_feed;
+ as102_dev->dvb_dmx.stop_feed = as102_dvb_dmx_stop_feed;
+
+ as102_dev->dvb_dmx.dmx.capabilities = DMX_TS_FILTERING |
+ DMX_SECTION_FILTERING;
+
+ as102_dev->dvb_dmxdev.filternum = as102_dev->dvb_dmx.filternum;
+ as102_dev->dvb_dmxdev.demux = &as102_dev->dvb_dmx.dmx;
+ as102_dev->dvb_dmxdev.capabilities = 0;
+
+ ret = dvb_dmx_init(&as102_dev->dvb_dmx);
+ if (ret < 0) {
+ err("%s: dvb_dmx_init() failed (errno = %d)", __func__, ret);
+ goto failed;
+ }
+
+ ret = dvb_dmxdev_init(&as102_dev->dvb_dmxdev, &as102_dev->dvb_adap);
+ if (ret < 0) {
+ err("%s: dvb_dmxdev_init() failed (errno = %d)", __func__,
+ ret);
+ goto failed;
+ }
+
+ ret = as102_dvb_register_fe(as102_dev, &as102_dev->dvb_fe);
+ if (ret < 0) {
+ err("%s: as102_dvb_register_frontend() failed (errno = %d)",
+ __func__, ret);
+ goto failed;
+ }
+
+ /* init bus mutex for token locking */
+ mutex_init(&as102_dev->bus_adap.lock);
+
+ /* init start / stop stream mutex */
+ mutex_init(&as102_dev->sem);
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+ /*
+ * try to load as102 firmware. If firmware upload failed, we'll be
+ * able to upload it later.
+ */
+ if (fw_upload)
+ try_then_request_module(as102_fw_upload(&as102_dev->bus_adap),
+ "firmware_class");
+#endif
+
+failed:
+ LEAVE();
+ /* FIXME: free dvb_XXX */
+ return ret;
+}
+
+void as102_dvb_unregister(struct as102_dev_t *as102_dev)
+{
+ ENTER();
+
+ /* unregister as102 frontend */
+ as102_dvb_unregister_fe(&as102_dev->dvb_fe);
+
+ /* unregister demux device */
+ dvb_dmxdev_release(&as102_dev->dvb_dmxdev);
+ dvb_dmx_release(&as102_dev->dvb_dmx);
+
+ /* unregister dvb adapter */
+ dvb_unregister_adapter(&as102_dev->dvb_adap);
+
+ LEAVE();
+}
+
+static int __init as102_driver_init(void)
+{
+ int ret = 0;
+
+ ENTER();
+
+ /* register this driver with the low level subsystem */
+#if defined(CONFIG_AS102_USB)
+ ret = usb_register(&as102_usb_driver);
+ if (ret)
+ err("usb_register failed (ret = %d)", ret);
+#endif
+#if defined(CONFIG_AS102_SPI)
+ ret = spi_register_driver(&as102_spi_driver);
+ if (ret)
+ printk(KERN_ERR "spi_register failed (ret = %d)", ret);
+#endif
+
+ LEAVE();
+ return ret;
+}
+
+/*
+ * Mandatory function : Adds a special section to the module indicating
+ * where initialisation function is defined
+ */
+module_init(as102_driver_init);
+
+/**
+ * as102_driver_exit - as102 driver exit point
+ *
+ * This function is called when device has to be removed.
+ */
+static void __exit as102_driver_exit(void)
+{
+ ENTER();
+ /* deregister this driver with the low level bus subsystem */
+#if defined(CONFIG_AS102_USB)
+ usb_deregister(&as102_usb_driver);
+#endif
+#if defined(CONFIG_AS102_SPI)
+ spi_unregister_driver(&as102_spi_driver);
+#endif
+ LEAVE();
+}
+
+/*
+ * required function for unload: Adds a special section to the module
+ * indicating where unload function is defined
+ */
+module_exit(as102_driver_exit);
+/* modinfo details */
+MODULE_DESCRIPTION(DRIVER_FULL_NAME);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pierrick Hascoet <pierrick.hascoet@abilis.com>");
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_drv.h b/drivers/staging/media/as102/as102_drv.h
new file mode 100644
index 0000000..bcda635
--- /dev/null
+++ b/drivers/staging/media/as102/as102_drv.h
@@ -0,0 +1,141 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if defined(CONFIG_AS102_USB)
+#include <linux/usb.h>
+extern struct usb_driver as102_usb_driver;
+#endif
+
+#if defined(CONFIG_AS102_SPI)
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/cdev.h>
+
+extern struct spi_driver as102_spi_driver;
+#endif
+
+#include "dvb_demux.h"
+#include "dvb_frontend.h"
+#include "dmxdev.h"
+
+#define DRIVER_FULL_NAME "Abilis Systems as10x usb driver"
+#define DRIVER_NAME "as10x_usb"
+
+extern int debug;
+
+#define dprintk(debug, args...) \
+ do { if (debug) { \
+ printk(KERN_DEBUG "%s: ",__FUNCTION__); \
+ printk(args); \
+ } } while (0)
+
+#ifdef TRACE
+#define ENTER() printk(">> enter %s\n", __FUNCTION__)
+#define LEAVE() printk("<< leave %s\n", __FUNCTION__)
+#else
+#define ENTER()
+#define LEAVE()
+#endif
+
+#define AS102_DEVICE_MAJOR 192
+
+#define AS102_USB_BUF_SIZE 512
+#define MAX_STREAM_URB 32
+
+#include "as10x_cmd.h"
+
+#if defined(CONFIG_AS102_USB)
+#include "as102_usb_drv.h"
+#endif
+
+#if defined(CONFIG_AS102_SPI)
+#include "as10x_spi_drv.h"
+#endif
+
+
+struct as102_bus_adapter_t {
+#if defined(CONFIG_AS102_USB)
+ struct usb_device *usb_dev;
+#elif defined(CONFIG_AS102_SPI)
+ struct spi_device *spi_dev;
+ struct cdev cdev; /* spidev raw device */
+
+ struct timer_list timer;
+ struct completion xfer_done;
+#endif
+ /* bus token lock */
+ struct mutex lock;
+ /* low level interface for bus adapter */
+ union as10x_bus_token_t {
+#if defined(CONFIG_AS102_USB)
+ /* usb token */
+ struct as10x_usb_token_cmd_t usb;
+#endif
+#if defined(CONFIG_AS102_SPI)
+ /* spi token */
+ struct as10x_spi_token_cmd_t spi;
+#endif
+ } token;
+
+ /* token cmd xfer id */
+ uint16_t cmd_xid;
+
+ /* as10x command and response for dvb interface*/
+ struct as10x_cmd_t *cmd, *rsp;
+
+ /* bus adapter private ops callback */
+ struct as102_priv_ops_t *ops;
+};
+
+struct as102_dev_t {
+ const char *name;
+ struct as102_bus_adapter_t bus_adap;
+ struct list_head device_entry;
+ struct kref kref;
+ unsigned long minor;
+
+ struct dvb_adapter dvb_adap;
+ struct dvb_frontend dvb_fe;
+ struct dvb_demux dvb_dmx;
+ struct dmxdev dvb_dmxdev;
+
+ /* demodulator stats */
+ struct as10x_demod_stats demod_stats;
+ /* signal strength */
+ uint16_t signal_strength;
+ /* bit error rate */
+ uint32_t ber;
+
+ /* timer handle to trig ts stream download */
+ struct timer_list timer_handle;
+
+ struct mutex sem;
+ dma_addr_t dma_addr;
+ void *stream;
+ int streaming;
+ struct urb *stream_urb[MAX_STREAM_URB];
+};
+
+int as102_dvb_register(struct as102_dev_t *dev);
+void as102_dvb_unregister(struct as102_dev_t *dev);
+
+int as102_dvb_register_fe(struct as102_dev_t *dev, struct dvb_frontend *fe);
+int as102_dvb_unregister_fe(struct dvb_frontend *dev);
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_fe.c b/drivers/staging/media/as102/as102_fe.c
new file mode 100644
index 0000000..3550f90
--- /dev/null
+++ b/drivers/staging/media/as102/as102_fe.c
@@ -0,0 +1,603 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/version.h>
+
+#include "as102_drv.h"
+#include "as10x_types.h"
+#include "as10x_cmd.h"
+
+extern int elna_enable;
+
+static void as10x_fe_copy_tps_parameters(struct dvb_frontend_parameters *dst,
+ struct as10x_tps *src);
+
+static void as102_fe_copy_tune_parameters(struct as10x_tune_args *dst,
+ struct dvb_frontend_parameters *src);
+
+static int as102_fe_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ int ret = 0;
+ struct as102_dev_t *dev;
+ struct as10x_tune_args tune_args = { 0 };
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -ENODEV;
+
+ if (mutex_lock_interruptible(&dev->bus_adap.lock))
+ return -EBUSY;
+
+ as102_fe_copy_tune_parameters(&tune_args, params);
+
+ /* send abilis command: SET_TUNE */
+ ret = as10x_cmd_set_tune(&dev->bus_adap, &tune_args);
+ if (ret != 0)
+ dprintk(debug, "as10x_cmd_set_tune failed. (err = %d)\n", ret);
+
+ mutex_unlock(&dev->bus_adap.lock);
+
+ LEAVE();
+ return (ret < 0) ? -EINVAL : 0;
+}
+
+static int as102_fe_get_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p) {
+ int ret = 0;
+ struct as102_dev_t *dev;
+ struct as10x_tps tps = { 0 };
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&dev->bus_adap.lock))
+ return -EBUSY;
+
+ /* send abilis command: GET_TPS */
+ ret = as10x_cmd_get_tps(&dev->bus_adap, &tps);
+
+ if (ret == 0)
+ as10x_fe_copy_tps_parameters(p, &tps);
+
+ mutex_unlock(&dev->bus_adap.lock);
+
+ LEAVE();
+ return (ret < 0) ? -EINVAL : 0;
+}
+
+static int as102_fe_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *settings) {
+ ENTER();
+
+#if 0
+ dprintk(debug, "step_size = %d\n", settings->step_size);
+ dprintk(debug, "max_drift = %d\n", settings->max_drift);
+ dprintk(debug, "min_delay_ms = %d -> %d\n", settings->min_delay_ms,
+ 1000);
+#endif
+
+ settings->min_delay_ms = 1000;
+
+ LEAVE();
+ return 0;
+}
+
+
+static int as102_fe_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ int ret = 0;
+ struct as102_dev_t *dev;
+ struct as10x_tune_status tstate = { 0 };
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -ENODEV;
+
+ if (mutex_lock_interruptible(&dev->bus_adap.lock))
+ return -EBUSY;
+
+ /* send abilis command: GET_TUNE_STATUS */
+ ret = as10x_cmd_get_tune_status(&dev->bus_adap, &tstate);
+ if (ret < 0) {
+ dprintk(debug, "as10x_cmd_get_tune_status failed (err = %d)\n",
+ ret);
+ goto out;
+ }
+
+ dev->signal_strength = tstate.signal_strength;
+ dev->ber = tstate.BER;
+
+ switch (tstate.tune_state) {
+ case TUNE_STATUS_SIGNAL_DVB_OK:
+ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
+ break;
+ case TUNE_STATUS_STREAM_DETECTED:
+ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC;
+ break;
+ case TUNE_STATUS_STREAM_TUNED:
+ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC |
+ FE_HAS_LOCK;
+ break;
+ default:
+ *status = TUNE_STATUS_NOT_TUNED;
+ }
+
+ dprintk(debug, "tuner status: 0x%02x, strength %d, per: %d, ber: %d\n",
+ tstate.tune_state, tstate.signal_strength,
+ tstate.PER, tstate.BER);
+
+ if (*status & FE_HAS_LOCK) {
+ if (as10x_cmd_get_demod_stats(&dev->bus_adap,
+ (struct as10x_demod_stats *) &dev->demod_stats) < 0) {
+ memset(&dev->demod_stats, 0, sizeof(dev->demod_stats));
+ dprintk(debug, "as10x_cmd_get_demod_stats failed "
+ "(probably not tuned)\n");
+ } else {
+ dprintk(debug,
+ "demod status: fc: 0x%08x, bad fc: 0x%08x, "
+ "bytes corrected: 0x%08x , MER: 0x%04x\n",
+ dev->demod_stats.frame_count,
+ dev->demod_stats.bad_frame_count,
+ dev->demod_stats.bytes_fixed_by_rs,
+ dev->demod_stats.mer);
+ }
+ } else {
+ memset(&dev->demod_stats, 0, sizeof(dev->demod_stats));
+ }
+
+out:
+ mutex_unlock(&dev->bus_adap.lock);
+ LEAVE();
+ return ret;
+}
+
+/*
+ * Note:
+ * - in AS102 SNR=MER
+ * - the SNR will be returned in linear terms, i.e. not in dB
+ * - the accuracy equals ±2dB for a SNR range from 4dB to 30dB
+ * - the accuracy is >2dB for SNR values outside this range
+ */
+static int as102_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct as102_dev_t *dev;
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -ENODEV;
+
+ *snr = dev->demod_stats.mer;
+
+ LEAVE();
+ return 0;
+}
+
+static int as102_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct as102_dev_t *dev;
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -ENODEV;
+
+ *ber = dev->ber;
+
+ LEAVE();
+ return 0;
+}
+
+static int as102_fe_read_signal_strength(struct dvb_frontend *fe,
+ u16 *strength)
+{
+ struct as102_dev_t *dev;
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -ENODEV;
+
+ *strength = (((0xffff * 400) * dev->signal_strength + 41000) * 2);
+
+ LEAVE();
+ return 0;
+}
+
+static int as102_fe_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct as102_dev_t *dev;
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -ENODEV;
+
+ if (dev->demod_stats.has_started)
+ *ucblocks = dev->demod_stats.bad_frame_count;
+ else
+ *ucblocks = 0;
+
+ LEAVE();
+ return 0;
+}
+
+static int as102_fe_ts_bus_ctrl(struct dvb_frontend *fe, int acquire)
+{
+ struct as102_dev_t *dev;
+ int ret;
+
+ ENTER();
+
+ dev = (struct as102_dev_t *) fe->tuner_priv;
+ if (dev == NULL)
+ return -ENODEV;
+
+ if (mutex_lock_interruptible(&dev->bus_adap.lock))
+ return -EBUSY;
+
+ if (acquire) {
+ if (elna_enable)
+ as10x_cmd_set_context(&dev->bus_adap, 1010, 0xC0);
+
+ ret = as10x_cmd_turn_on(&dev->bus_adap);
+ } else {
+ ret = as10x_cmd_turn_off(&dev->bus_adap);
+ }
+
+ mutex_unlock(&dev->bus_adap.lock);
+
+ LEAVE();
+ return ret;
+}
+
+static struct dvb_frontend_ops as102_fe_ops = {
+ .info = {
+ .name = "Unknown AS102 device",
+ .type = FE_OFDM,
+ .frequency_min = 174000000,
+ .frequency_max = 862000000,
+ .frequency_stepsize = 166667,
+ .caps = FE_CAN_INVERSION_AUTO
+ | FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4
+ | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO
+ | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QPSK
+ | FE_CAN_QAM_AUTO
+ | FE_CAN_TRANSMISSION_MODE_AUTO
+ | FE_CAN_GUARD_INTERVAL_AUTO
+ | FE_CAN_HIERARCHY_AUTO
+ | FE_CAN_RECOVER
+ | FE_CAN_MUTE_TS
+ },
+
+ .set_frontend = as102_fe_set_frontend,
+ .get_frontend = as102_fe_get_frontend,
+ .get_tune_settings = as102_fe_get_tune_settings,
+
+ .read_status = as102_fe_read_status,
+ .read_snr = as102_fe_read_snr,
+ .read_ber = as102_fe_read_ber,
+ .read_signal_strength = as102_fe_read_signal_strength,
+ .read_ucblocks = as102_fe_read_ucblocks,
+ .ts_bus_ctrl = as102_fe_ts_bus_ctrl,
+};
+
+int as102_dvb_unregister_fe(struct dvb_frontend *fe)
+{
+ /* unregister frontend */
+ dvb_unregister_frontend(fe);
+
+ /* detach frontend */
+ dvb_frontend_detach(fe);
+
+ return 0;
+}
+
+int as102_dvb_register_fe(struct as102_dev_t *as102_dev,
+ struct dvb_frontend *dvb_fe)
+{
+ int errno;
+ struct dvb_adapter *dvb_adap;
+
+ if (as102_dev == NULL)
+ return -EINVAL;
+
+ /* extract dvb_adapter */
+ dvb_adap = &as102_dev->dvb_adap;
+
+ /* init frontend callback ops */
+ memcpy(&dvb_fe->ops, &as102_fe_ops, sizeof(struct dvb_frontend_ops));
+ strncpy(dvb_fe->ops.info.name, as102_dev->name,
+ sizeof(dvb_fe->ops.info.name));
+
+ /* register dbvb frontend */
+ errno = dvb_register_frontend(dvb_adap, dvb_fe);
+ if (errno == 0)
+ dvb_fe->tuner_priv = as102_dev;
+
+ return errno;
+}
+
+static void as10x_fe_copy_tps_parameters(struct dvb_frontend_parameters *dst,
+ struct as10x_tps *as10x_tps)
+{
+
+ struct dvb_ofdm_parameters *fe_tps = &dst->u.ofdm;
+
+ /* extract consteallation */
+ switch (as10x_tps->constellation) {
+ case CONST_QPSK:
+ fe_tps->constellation = QPSK;
+ break;
+ case CONST_QAM16:
+ fe_tps->constellation = QAM_16;
+ break;
+ case CONST_QAM64:
+ fe_tps->constellation = QAM_64;
+ break;
+ }
+
+ /* extract hierarchy */
+ switch (as10x_tps->hierarchy) {
+ case HIER_NONE:
+ fe_tps->hierarchy_information = HIERARCHY_NONE;
+ break;
+ case HIER_ALPHA_1:
+ fe_tps->hierarchy_information = HIERARCHY_1;
+ break;
+ case HIER_ALPHA_2:
+ fe_tps->hierarchy_information = HIERARCHY_2;
+ break;
+ case HIER_ALPHA_4:
+ fe_tps->hierarchy_information = HIERARCHY_4;
+ break;
+ }
+
+ /* extract code rate HP */
+ switch (as10x_tps->code_rate_HP) {
+ case CODE_RATE_1_2:
+ fe_tps->code_rate_HP = FEC_1_2;
+ break;
+ case CODE_RATE_2_3:
+ fe_tps->code_rate_HP = FEC_2_3;
+ break;
+ case CODE_RATE_3_4:
+ fe_tps->code_rate_HP = FEC_3_4;
+ break;
+ case CODE_RATE_5_6:
+ fe_tps->code_rate_HP = FEC_5_6;
+ break;
+ case CODE_RATE_7_8:
+ fe_tps->code_rate_HP = FEC_7_8;
+ break;
+ }
+
+ /* extract code rate LP */
+ switch (as10x_tps->code_rate_LP) {
+ case CODE_RATE_1_2:
+ fe_tps->code_rate_LP = FEC_1_2;
+ break;
+ case CODE_RATE_2_3:
+ fe_tps->code_rate_LP = FEC_2_3;
+ break;
+ case CODE_RATE_3_4:
+ fe_tps->code_rate_LP = FEC_3_4;
+ break;
+ case CODE_RATE_5_6:
+ fe_tps->code_rate_LP = FEC_5_6;
+ break;
+ case CODE_RATE_7_8:
+ fe_tps->code_rate_LP = FEC_7_8;
+ break;
+ }
+
+ /* extract guard interval */
+ switch (as10x_tps->guard_interval) {
+ case GUARD_INT_1_32:
+ fe_tps->guard_interval = GUARD_INTERVAL_1_32;
+ break;
+ case GUARD_INT_1_16:
+ fe_tps->guard_interval = GUARD_INTERVAL_1_16;
+ break;
+ case GUARD_INT_1_8:
+ fe_tps->guard_interval = GUARD_INTERVAL_1_8;
+ break;
+ case GUARD_INT_1_4:
+ fe_tps->guard_interval = GUARD_INTERVAL_1_4;
+ break;
+ }
+
+ /* extract transmission mode */
+ switch (as10x_tps->transmission_mode) {
+ case TRANS_MODE_2K:
+ fe_tps->transmission_mode = TRANSMISSION_MODE_2K;
+ break;
+ case TRANS_MODE_8K:
+ fe_tps->transmission_mode = TRANSMISSION_MODE_8K;
+ break;
+ }
+}
+
+static uint8_t as102_fe_get_code_rate(fe_code_rate_t arg)
+{
+ uint8_t c;
+
+ switch (arg) {
+ case FEC_1_2:
+ c = CODE_RATE_1_2;
+ break;
+ case FEC_2_3:
+ c = CODE_RATE_2_3;
+ break;
+ case FEC_3_4:
+ c = CODE_RATE_3_4;
+ break;
+ case FEC_5_6:
+ c = CODE_RATE_5_6;
+ break;
+ case FEC_7_8:
+ c = CODE_RATE_7_8;
+ break;
+ default:
+ c = CODE_RATE_UNKNOWN;
+ break;
+ }
+
+ return c;
+}
+
+static void as102_fe_copy_tune_parameters(struct as10x_tune_args *tune_args,
+ struct dvb_frontend_parameters *params)
+{
+
+ /* set frequency */
+ tune_args->freq = params->frequency / 1000;
+
+ /* fix interleaving_mode */
+ tune_args->interleaving_mode = INTLV_NATIVE;
+
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_8_MHZ:
+ tune_args->bandwidth = BW_8_MHZ;
+ break;
+ case BANDWIDTH_7_MHZ:
+ tune_args->bandwidth = BW_7_MHZ;
+ break;
+ case BANDWIDTH_6_MHZ:
+ tune_args->bandwidth = BW_6_MHZ;
+ break;
+ default:
+ tune_args->bandwidth = BW_8_MHZ;
+ }
+
+ switch (params->u.ofdm.guard_interval) {
+ case GUARD_INTERVAL_1_32:
+ tune_args->guard_interval = GUARD_INT_1_32;
+ break;
+ case GUARD_INTERVAL_1_16:
+ tune_args->guard_interval = GUARD_INT_1_16;
+ break;
+ case GUARD_INTERVAL_1_8:
+ tune_args->guard_interval = GUARD_INT_1_8;
+ break;
+ case GUARD_INTERVAL_1_4:
+ tune_args->guard_interval = GUARD_INT_1_4;
+ break;
+ case GUARD_INTERVAL_AUTO:
+ default:
+ tune_args->guard_interval = GUARD_UNKNOWN;
+ break;
+ }
+
+ switch (params->u.ofdm.constellation) {
+ case QPSK:
+ tune_args->constellation = CONST_QPSK;
+ break;
+ case QAM_16:
+ tune_args->constellation = CONST_QAM16;
+ break;
+ case QAM_64:
+ tune_args->constellation = CONST_QAM64;
+ break;
+ default:
+ tune_args->constellation = CONST_UNKNOWN;
+ break;
+ }
+
+ switch (params->u.ofdm.transmission_mode) {
+ case TRANSMISSION_MODE_2K:
+ tune_args->transmission_mode = TRANS_MODE_2K;
+ break;
+ case TRANSMISSION_MODE_8K:
+ tune_args->transmission_mode = TRANS_MODE_8K;
+ break;
+ default:
+ tune_args->transmission_mode = TRANS_MODE_UNKNOWN;
+ }
+
+ switch (params->u.ofdm.hierarchy_information) {
+ case HIERARCHY_NONE:
+ tune_args->hierarchy = HIER_NONE;
+ break;
+ case HIERARCHY_1:
+ tune_args->hierarchy = HIER_ALPHA_1;
+ break;
+ case HIERARCHY_2:
+ tune_args->hierarchy = HIER_ALPHA_2;
+ break;
+ case HIERARCHY_4:
+ tune_args->hierarchy = HIER_ALPHA_4;
+ break;
+ case HIERARCHY_AUTO:
+ tune_args->hierarchy = HIER_UNKNOWN;
+ break;
+ }
+
+ dprintk(debug, "tuner parameters: freq: %d bw: 0x%02x gi: 0x%02x\n",
+ params->frequency,
+ tune_args->bandwidth,
+ tune_args->guard_interval);
+
+ /*
+ * Detect a hierarchy selection
+ * if HP/LP are both set to FEC_NONE, HP will be selected.
+ */
+ if ((tune_args->hierarchy != HIER_NONE) &&
+ ((params->u.ofdm.code_rate_LP == FEC_NONE) ||
+ (params->u.ofdm.code_rate_HP == FEC_NONE))) {
+
+ if (params->u.ofdm.code_rate_LP == FEC_NONE) {
+ tune_args->hier_select = HIER_HIGH_PRIORITY;
+ tune_args->code_rate =
+ as102_fe_get_code_rate(params->u.ofdm.code_rate_HP);
+ }
+
+ if (params->u.ofdm.code_rate_HP == FEC_NONE) {
+ tune_args->hier_select = HIER_LOW_PRIORITY;
+ tune_args->code_rate =
+ as102_fe_get_code_rate(params->u.ofdm.code_rate_LP);
+ }
+
+ dprintk(debug, "\thierarchy: 0x%02x "
+ "selected: %s code_rate_%s: 0x%02x\n",
+ tune_args->hierarchy,
+ tune_args->hier_select == HIER_HIGH_PRIORITY ?
+ "HP" : "LP",
+ tune_args->hier_select == HIER_HIGH_PRIORITY ?
+ "HP" : "LP",
+ tune_args->code_rate);
+ } else {
+ tune_args->code_rate =
+ as102_fe_get_code_rate(params->u.ofdm.code_rate_HP);
+ }
+}
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_fw.c b/drivers/staging/media/as102/as102_fw.c
new file mode 100644
index 0000000..c019df9
--- /dev/null
+++ b/drivers/staging/media/as102/as102_fw.c
@@ -0,0 +1,251 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+
+#include "as102_drv.h"
+#include "as102_fw.h"
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+char as102_st_fw1[] = "as102_data1_st.hex";
+char as102_st_fw2[] = "as102_data2_st.hex";
+char as102_dt_fw1[] = "as102_data1_dt.hex";
+char as102_dt_fw2[] = "as102_data2_dt.hex";
+
+static unsigned char atohx(unsigned char *dst, char *src)
+{
+ unsigned char value = 0;
+
+ char msb = tolower(*src) - '0';
+ char lsb = tolower(*(src + 1)) - '0';
+
+ if (msb > 9)
+ msb -= 7;
+ if (lsb > 9)
+ lsb -= 7;
+
+ *dst = value = ((msb & 0xF) << 4) | (lsb & 0xF);
+ return value;
+}
+
+/*
+ * Parse INTEL HEX firmware file to extract address and data.
+ */
+static int parse_hex_line(unsigned char *fw_data, unsigned char *addr,
+ unsigned char *data, int *dataLength,
+ unsigned char *addr_has_changed) {
+
+ int count = 0;
+ unsigned char *src, dst;
+
+ if (*fw_data++ != ':') {
+ printk(KERN_ERR "invalid firmware file\n");
+ return -EFAULT;
+ }
+
+ /* locate end of line */
+ for (src = fw_data; *src != '\n'; src += 2) {
+ atohx(&dst, src);
+ /* parse line to split addr / data */
+ switch (count) {
+ case 0:
+ *dataLength = dst;
+ break;
+ case 1:
+ addr[2] = dst;
+ break;
+ case 2:
+ addr[3] = dst;
+ break;
+ case 3:
+ /* check if data is an address */
+ if (dst == 0x04)
+ *addr_has_changed = 1;
+ else
+ *addr_has_changed = 0;
+ break;
+ case 4:
+ case 5:
+ if (*addr_has_changed)
+ addr[(count - 4)] = dst;
+ else
+ data[(count - 4)] = dst;
+ break;
+ default:
+ data[(count - 4)] = dst;
+ break;
+ }
+ count++;
+ }
+
+ /* return read value + ':' + '\n' */
+ return (count * 2) + 2;
+}
+
+static int as102_firmware_upload(struct as102_bus_adapter_t *bus_adap,
+ unsigned char *cmd,
+ const struct firmware *firmware) {
+
+ struct as10x_fw_pkt_t fw_pkt;
+ int total_read_bytes = 0, errno = 0;
+ unsigned char addr_has_changed = 0;
+
+ ENTER();
+
+ for (total_read_bytes = 0; total_read_bytes < firmware->size; ) {
+ int read_bytes = 0, data_len = 0;
+
+ /* parse intel hex line */
+ read_bytes = parse_hex_line(
+ (u8 *) (firmware->data + total_read_bytes),
+ fw_pkt.raw.address,
+ fw_pkt.raw.data,
+ &data_len,
+ &addr_has_changed);
+
+ if (read_bytes <= 0)
+ goto error;
+
+ /* detect the end of file */
+ total_read_bytes += read_bytes;
+ if (total_read_bytes == firmware->size) {
+ fw_pkt.u.request[0] = 0x00;
+ fw_pkt.u.request[1] = 0x03;
+
+ /* send EOF command */
+ errno = bus_adap->ops->upload_fw_pkt(bus_adap,
+ (uint8_t *)
+ &fw_pkt, 2, 0);
+ if (errno < 0)
+ goto error;
+ } else {
+ if (!addr_has_changed) {
+ /* prepare command to send */
+ fw_pkt.u.request[0] = 0x00;
+ fw_pkt.u.request[1] = 0x01;
+
+ data_len += sizeof(fw_pkt.u.request);
+ data_len += sizeof(fw_pkt.raw.address);
+
+ /* send cmd to device */
+ errno = bus_adap->ops->upload_fw_pkt(bus_adap,
+ (uint8_t *)
+ &fw_pkt,
+ data_len,
+ 0);
+ if (errno < 0)
+ goto error;
+ }
+ }
+ }
+error:
+ LEAVE();
+ return (errno == 0) ? total_read_bytes : errno;
+}
+
+int as102_fw_upload(struct as102_bus_adapter_t *bus_adap)
+{
+ int errno = -EFAULT;
+ const struct firmware *firmware;
+ unsigned char *cmd_buf = NULL;
+ char *fw1, *fw2;
+
+#if defined(CONFIG_AS102_USB)
+ struct usb_device *dev = bus_adap->usb_dev;
+#endif
+#if defined(CONFIG_AS102_SPI)
+ struct spi_device *dev = bus_adap->spi_dev;
+#endif
+ ENTER();
+
+ /* select fw file to upload */
+ if (dual_tuner) {
+ fw1 = as102_dt_fw1;
+ fw2 = as102_dt_fw2;
+ } else {
+ fw1 = as102_st_fw1;
+ fw2 = as102_st_fw2;
+ }
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
+ /* allocate buffer to store firmware upload command and data */
+ cmd_buf = kzalloc(MAX_FW_PKT_SIZE, GFP_KERNEL);
+ if (cmd_buf == NULL) {
+ errno = -ENOMEM;
+ goto error;
+ }
+
+ /* request kernel to locate firmware file: part1 */
+ errno = request_firmware(&firmware, fw1, &dev->dev);
+ if (errno < 0) {
+ printk(KERN_ERR "%s: unable to locate firmware file: %s\n",
+ DRIVER_NAME, fw1);
+ goto error;
+ }
+
+ /* initiate firmware upload */
+ errno = as102_firmware_upload(bus_adap, cmd_buf, firmware);
+ if (errno < 0) {
+ printk(KERN_ERR "%s: error during firmware upload part1\n",
+ DRIVER_NAME);
+ goto error;
+ }
+
+ printk(KERN_INFO "%s: fimrware: %s loaded with success\n",
+ DRIVER_NAME, fw1);
+ release_firmware(firmware);
+
+ /* wait for boot to complete */
+ mdelay(100);
+
+ /* request kernel to locate firmware file: part2 */
+ errno = request_firmware(&firmware, fw2, &dev->dev);
+ if (errno < 0) {
+ printk(KERN_ERR "%s: unable to locate firmware file: %s\n",
+ DRIVER_NAME, fw2);
+ goto error;
+ }
+
+ /* initiate firmware upload */
+ errno = as102_firmware_upload(bus_adap, cmd_buf, firmware);
+ if (errno < 0) {
+ printk(KERN_ERR "%s: error during firmware upload part2\n",
+ DRIVER_NAME);
+ goto error;
+ }
+
+ printk(KERN_INFO "%s: fimrware: %s loaded with success\n",
+ DRIVER_NAME, fw2);
+error:
+ /* free data buffer */
+ kfree(cmd_buf);
+ /* release firmware if needed */
+ if (firmware != NULL)
+ release_firmware(firmware);
+#endif
+ LEAVE();
+ return errno;
+}
+#endif
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_fw.h b/drivers/staging/media/as102/as102_fw.h
new file mode 100644
index 0000000..27e5347
--- /dev/null
+++ b/drivers/staging/media/as102/as102_fw.h
@@ -0,0 +1,42 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#define MAX_FW_PKT_SIZE 64
+
+extern int dual_tuner;
+
+#pragma pack(1)
+struct as10x_raw_fw_pkt {
+ unsigned char address[4];
+ unsigned char data[MAX_FW_PKT_SIZE - 6];
+};
+
+struct as10x_fw_pkt_t {
+ union {
+ unsigned char request[2];
+ unsigned char length[2];
+ } u;
+ struct as10x_raw_fw_pkt raw;
+};
+#pragma pack()
+
+#ifdef __KERNEL__
+int as102_fw_upload(struct as102_bus_adapter_t *bus_adap);
+#endif
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_usb_drv.c b/drivers/staging/media/as102/as102_usb_drv.c
new file mode 100644
index 0000000..264be2d
--- /dev/null
+++ b/drivers/staging/media/as102/as102_usb_drv.c
@@ -0,0 +1,478 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/usb.h>
+
+#include "as102_drv.h"
+#include "as102_usb_drv.h"
+#include "as102_fw.h"
+
+static void as102_usb_disconnect(struct usb_interface *interface);
+static int as102_usb_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
+static int as102_usb_start_stream(struct as102_dev_t *dev);
+static void as102_usb_stop_stream(struct as102_dev_t *dev);
+
+static int as102_open(struct inode *inode, struct file *file);
+static int as102_release(struct inode *inode, struct file *file);
+
+static struct usb_device_id as102_usb_id_table[] = {
+ { USB_DEVICE(AS102_USB_DEVICE_VENDOR_ID, AS102_USB_DEVICE_PID_0001) },
+ { USB_DEVICE(PCTV_74E_USB_VID, PCTV_74E_USB_PID) },
+ { USB_DEVICE(ELGATO_EYETV_DTT_USB_VID, ELGATO_EYETV_DTT_USB_PID) },
+ { USB_DEVICE(NBOX_DVBT_DONGLE_USB_VID, NBOX_DVBT_DONGLE_USB_PID) },
+ { } /* Terminating entry */
+};
+
+/* Note that this table must always have the same number of entries as the
+ as102_usb_id_table struct */
+static const char *as102_device_names[] = {
+ AS102_REFERENCE_DESIGN,
+ AS102_PCTV_74E,
+ AS102_ELGATO_EYETV_DTT_NAME,
+ AS102_NBOX_DVBT_DONGLE_NAME,
+ NULL /* Terminating entry */
+};
+
+struct usb_driver as102_usb_driver = {
+ .name = DRIVER_FULL_NAME,
+ .probe = as102_usb_probe,
+ .disconnect = as102_usb_disconnect,
+ .id_table = as102_usb_id_table
+};
+
+static const struct file_operations as102_dev_fops = {
+ .owner = THIS_MODULE,
+ .open = as102_open,
+ .release = as102_release,
+};
+
+static struct usb_class_driver as102_usb_class_driver = {
+ .name = "aton2-%d",
+ .fops = &as102_dev_fops,
+ .minor_base = AS102_DEVICE_MAJOR,
+};
+
+static int as102_usb_xfer_cmd(struct as102_bus_adapter_t *bus_adap,
+ unsigned char *send_buf, int send_buf_len,
+ unsigned char *recv_buf, int recv_buf_len)
+{
+ int ret = 0;
+ ENTER();
+
+ if (send_buf != NULL) {
+ ret = usb_control_msg(bus_adap->usb_dev,
+ usb_sndctrlpipe(bus_adap->usb_dev, 0),
+ AS102_USB_DEVICE_TX_CTRL_CMD,
+ USB_DIR_OUT | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE,
+ bus_adap->cmd_xid, /* value */
+ 0, /* index */
+ send_buf, send_buf_len,
+ USB_CTRL_SET_TIMEOUT /* 200 */);
+ if (ret < 0) {
+ dprintk(debug, "usb_control_msg(send) failed, err %i\n",
+ ret);
+ return ret;
+ }
+
+ if (ret != send_buf_len) {
+ dprintk(debug, "only wrote %d of %d bytes\n",
+ ret, send_buf_len);
+ return -1;
+ }
+ }
+
+ if (recv_buf != NULL) {
+#ifdef TRACE
+ dprintk(debug, "want to read: %d bytes\n", recv_buf_len);
+#endif
+ ret = usb_control_msg(bus_adap->usb_dev,
+ usb_rcvctrlpipe(bus_adap->usb_dev, 0),
+ AS102_USB_DEVICE_RX_CTRL_CMD,
+ USB_DIR_IN | USB_TYPE_VENDOR |
+ USB_RECIP_DEVICE,
+ bus_adap->cmd_xid, /* value */
+ 0, /* index */
+ recv_buf, recv_buf_len,
+ USB_CTRL_GET_TIMEOUT /* 200 */);
+ if (ret < 0) {
+ dprintk(debug, "usb_control_msg(recv) failed, err %i\n",
+ ret);
+ return ret;
+ }
+#ifdef TRACE
+ dprintk(debug, "read %d bytes\n", recv_buf_len);
+#endif
+ }
+
+ LEAVE();
+ return ret;
+}
+
+static int as102_send_ep1(struct as102_bus_adapter_t *bus_adap,
+ unsigned char *send_buf,
+ int send_buf_len,
+ int swap32)
+{
+ int ret = 0, actual_len;
+
+ ret = usb_bulk_msg(bus_adap->usb_dev,
+ usb_sndbulkpipe(bus_adap->usb_dev, 1),
+ send_buf, send_buf_len, &actual_len, 200);
+ if (ret) {
+ dprintk(debug, "usb_bulk_msg(send) failed, err %i\n", ret);
+ return ret;
+ }
+
+ if (actual_len != send_buf_len) {
+ dprintk(debug, "only wrote %d of %d bytes\n",
+ actual_len, send_buf_len);
+ return -1;
+ }
+ return ret ? ret : actual_len;
+}
+
+static int as102_read_ep2(struct as102_bus_adapter_t *bus_adap,
+ unsigned char *recv_buf, int recv_buf_len)
+{
+ int ret = 0, actual_len;
+
+ if (recv_buf == NULL)
+ return -EINVAL;
+
+ ret = usb_bulk_msg(bus_adap->usb_dev,
+ usb_rcvbulkpipe(bus_adap->usb_dev, 2),
+ recv_buf, recv_buf_len, &actual_len, 200);
+ if (ret) {
+ dprintk(debug, "usb_bulk_msg(recv) failed, err %i\n", ret);
+ return ret;
+ }
+
+ if (actual_len != recv_buf_len) {
+ dprintk(debug, "only read %d of %d bytes\n",
+ actual_len, recv_buf_len);
+ return -1;
+ }
+ return ret ? ret : actual_len;
+}
+
+struct as102_priv_ops_t as102_priv_ops = {
+ .upload_fw_pkt = as102_send_ep1,
+ .xfer_cmd = as102_usb_xfer_cmd,
+ .as102_read_ep2 = as102_read_ep2,
+ .start_stream = as102_usb_start_stream,
+ .stop_stream = as102_usb_stop_stream,
+};
+
+static int as102_submit_urb_stream(struct as102_dev_t *dev, struct urb *urb)
+{
+ int err;
+
+ usb_fill_bulk_urb(urb,
+ dev->bus_adap.usb_dev,
+ usb_rcvbulkpipe(dev->bus_adap.usb_dev, 0x2),
+ urb->transfer_buffer,
+ AS102_USB_BUF_SIZE,
+ as102_urb_stream_irq,
+ dev);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ dprintk(debug, "%s: usb_submit_urb failed\n", __func__);
+
+ return err;
+}
+
+void as102_urb_stream_irq(struct urb *urb)
+{
+ struct as102_dev_t *as102_dev = urb->context;
+
+ if (urb->actual_length > 0) {
+ dvb_dmx_swfilter(&as102_dev->dvb_dmx,
+ urb->transfer_buffer,
+ urb->actual_length);
+ } else {
+ if (urb->actual_length == 0)
+ memset(urb->transfer_buffer, 0, AS102_USB_BUF_SIZE);
+ }
+
+ /* is not stopped, re-submit urb */
+ if (as102_dev->streaming)
+ as102_submit_urb_stream(as102_dev, urb);
+}
+
+static void as102_free_usb_stream_buffer(struct as102_dev_t *dev)
+{
+ int i;
+
+ ENTER();
+
+ for (i = 0; i < MAX_STREAM_URB; i++)
+ usb_free_urb(dev->stream_urb[i]);
+
+ usb_free_coherent(dev->bus_adap.usb_dev,
+ MAX_STREAM_URB * AS102_USB_BUF_SIZE,
+ dev->stream,
+ dev->dma_addr);
+ LEAVE();
+}
+
+static int as102_alloc_usb_stream_buffer(struct as102_dev_t *dev)
+{
+ int i, ret = 0;
+
+ ENTER();
+
+ dev->stream = usb_alloc_coherent(dev->bus_adap.usb_dev,
+ MAX_STREAM_URB * AS102_USB_BUF_SIZE,
+ GFP_KERNEL,
+ &dev->dma_addr);
+ if (!dev->stream) {
+ dprintk(debug, "%s: usb_buffer_alloc failed\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(dev->stream, 0, MAX_STREAM_URB * AS102_USB_BUF_SIZE);
+
+ /* init urb buffers */
+ for (i = 0; i < MAX_STREAM_URB; i++) {
+ struct urb *urb;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (urb == NULL) {
+ dprintk(debug, "%s: usb_alloc_urb failed\n", __func__);
+ as102_free_usb_stream_buffer(dev);
+ return -ENOMEM;
+ }
+
+ urb->transfer_buffer = dev->stream + (i * AS102_USB_BUF_SIZE);
+ urb->transfer_buffer_length = AS102_USB_BUF_SIZE;
+
+ dev->stream_urb[i] = urb;
+ }
+ LEAVE();
+ return ret;
+}
+
+static void as102_usb_stop_stream(struct as102_dev_t *dev)
+{
+ int i;
+
+ for (i = 0; i < MAX_STREAM_URB; i++)
+ usb_kill_urb(dev->stream_urb[i]);
+}
+
+static int as102_usb_start_stream(struct as102_dev_t *dev)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < MAX_STREAM_URB; i++) {
+ ret = as102_submit_urb_stream(dev, dev->stream_urb[i]);
+ if (ret) {
+ as102_usb_stop_stream(dev);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static void as102_usb_release(struct kref *kref)
+{
+ struct as102_dev_t *as102_dev;
+
+ ENTER();
+
+ as102_dev = container_of(kref, struct as102_dev_t, kref);
+ if (as102_dev != NULL) {
+ usb_put_dev(as102_dev->bus_adap.usb_dev);
+ kfree(as102_dev);
+ }
+
+ LEAVE();
+}
+
+static void as102_usb_disconnect(struct usb_interface *intf)
+{
+ struct as102_dev_t *as102_dev;
+
+ ENTER();
+
+ /* extract as102_dev_t from usb_device private data */
+ as102_dev = usb_get_intfdata(intf);
+
+ /* unregister dvb layer */
+ as102_dvb_unregister(as102_dev);
+
+ /* free usb buffers */
+ as102_free_usb_stream_buffer(as102_dev);
+
+ usb_set_intfdata(intf, NULL);
+
+ /* usb unregister device */
+ usb_deregister_dev(intf, &as102_usb_class_driver);
+
+ /* decrement usage counter */
+ kref_put(&as102_dev->kref, as102_usb_release);
+
+ printk(KERN_INFO "%s: device has been disconnected\n", DRIVER_NAME);
+
+ LEAVE();
+}
+
+static int as102_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct as102_dev_t *as102_dev;
+ int i;
+
+ ENTER();
+
+ as102_dev = kzalloc(sizeof(struct as102_dev_t), GFP_KERNEL);
+ if (as102_dev == NULL) {
+ err("%s: kzalloc failed", __func__);
+ return -ENOMEM;
+ }
+
+ /* This should never actually happen */
+ if ((sizeof(as102_usb_id_table) / sizeof(struct usb_device_id)) !=
+ (sizeof(as102_device_names) / sizeof(const char *))) {
+ printk(KERN_ERR "Device names table invalid size");
+ return -EINVAL;
+ }
+
+ /* Assign the user-friendly device name */
+ for (i = 0; i < (sizeof(as102_usb_id_table) /
+ sizeof(struct usb_device_id)); i++) {
+ if (id == &as102_usb_id_table[i])
+ as102_dev->name = as102_device_names[i];
+ }
+
+ if (as102_dev->name == NULL)
+ as102_dev->name = "Unknown AS102 device";
+
+ /* set private callback functions */
+ as102_dev->bus_adap.ops = &as102_priv_ops;
+
+ /* init cmd token for usb bus */
+ as102_dev->bus_adap.cmd = &as102_dev->bus_adap.token.usb.c;
+ as102_dev->bus_adap.rsp = &as102_dev->bus_adap.token.usb.r;
+
+ /* init kernel device reference */
+ kref_init(&as102_dev->kref);
+
+ /* store as102 device to usb_device private data */
+ usb_set_intfdata(intf, (void *) as102_dev);
+
+ /* store in as102 device the usb_device pointer */
+ as102_dev->bus_adap.usb_dev = usb_get_dev(interface_to_usbdev(intf));
+
+ /* we can register the device now, as it is ready */
+ ret = usb_register_dev(intf, &as102_usb_class_driver);
+ if (ret < 0) {
+ /* something prevented us from registering this driver */
+ err("%s: usb_register_dev() failed (errno = %d)",
+ __func__, ret);
+ goto failed;
+ }
+
+ printk(KERN_INFO "%s: device has been detected\n", DRIVER_NAME);
+
+ /* request buffer allocation for streaming */
+ ret = as102_alloc_usb_stream_buffer(as102_dev);
+ if (ret != 0)
+ goto failed;
+
+ /* register dvb layer */
+ ret = as102_dvb_register(as102_dev);
+
+ LEAVE();
+ return ret;
+
+failed:
+ usb_set_intfdata(intf, NULL);
+ kfree(as102_dev);
+ return ret;
+}
+
+static int as102_open(struct inode *inode, struct file *file)
+{
+ int ret = 0, minor = 0;
+ struct usb_interface *intf = NULL;
+ struct as102_dev_t *dev = NULL;
+
+ ENTER();
+
+ /* read minor from inode */
+ minor = iminor(inode);
+
+ /* fetch device from usb interface */
+ intf = usb_find_interface(&as102_usb_driver, minor);
+ if (intf == NULL) {
+ printk(KERN_ERR "%s: can't find device for minor %d\n",
+ __func__, minor);
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ /* get our device */
+ dev = usb_get_intfdata(intf);
+ if (dev == NULL) {
+ ret = -EFAULT;
+ goto exit;
+ }
+
+ /* save our device object in the file's private structure */
+ file->private_data = dev;
+
+ /* increment our usage count for the device */
+ kref_get(&dev->kref);
+
+exit:
+ LEAVE();
+ return ret;
+}
+
+static int as102_release(struct inode *inode, struct file *file)
+{
+ int ret = 0;
+ struct as102_dev_t *dev = NULL;
+
+ ENTER();
+
+ dev = file->private_data;
+ if (dev != NULL) {
+ /* decrement the count on our device */
+ kref_put(&dev->kref, as102_usb_release);
+ }
+
+ LEAVE();
+ return ret;
+}
+
+MODULE_DEVICE_TABLE(usb, as102_usb_id_table);
+
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as102_usb_drv.h b/drivers/staging/media/as102/as102_usb_drv.h
new file mode 100644
index 0000000..fb1fc41
--- /dev/null
+++ b/drivers/staging/media/as102/as102_usb_drv.h
@@ -0,0 +1,59 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/version.h>
+
+#ifndef _AS102_USB_DRV_H_
+#define _AS102_USB_DRV_H_
+
+#define AS102_USB_DEVICE_TX_CTRL_CMD 0xF1
+#define AS102_USB_DEVICE_RX_CTRL_CMD 0xF2
+
+/* define these values to match the supported devices */
+
+/* Abilis system: "TITAN" */
+#define AS102_REFERENCE_DESIGN "Abilis Systems DVB-Titan"
+#define AS102_USB_DEVICE_VENDOR_ID 0x1BA6
+#define AS102_USB_DEVICE_PID_0001 0x0001
+
+/* PCTV Systems: PCTV picoStick (74e) */
+#define AS102_PCTV_74E "PCTV Systems picoStick (74e)"
+#define PCTV_74E_USB_VID 0x2013
+#define PCTV_74E_USB_PID 0x0246
+
+/* Elgato: EyeTV DTT Deluxe */
+#define AS102_ELGATO_EYETV_DTT_NAME "Elgato EyeTV DTT Deluxe"
+#define ELGATO_EYETV_DTT_USB_VID 0x0fd9
+#define ELGATO_EYETV_DTT_USB_PID 0x002c
+
+/* nBox: nBox DVB-T Dongle */
+#define AS102_NBOX_DVBT_DONGLE_NAME "nBox DVB-T Dongle"
+#define NBOX_DVBT_DONGLE_USB_VID 0x0b89
+#define NBOX_DVBT_DONGLE_USB_PID 0x0007
+
+void as102_urb_stream_irq(struct urb *urb);
+
+struct as10x_usb_token_cmd_t {
+ /* token cmd */
+ struct as10x_cmd_t c;
+ /* token response */
+ struct as10x_cmd_t r;
+};
+#endif
+/* EOF - vim: set textwidth=80 ts=8 sw=8 sts=8 noet: */
diff --git a/drivers/staging/media/as102/as10x_cmd.c b/drivers/staging/media/as102/as10x_cmd.c
new file mode 100644
index 0000000..0dcba80
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd.c
@@ -0,0 +1,452 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ * Copyright (C) 2010 Devin Heitmueller <dheitmueller@kernellabs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include "as102_drv.h"
+#include "as10x_types.h"
+#include "as10x_cmd.h"
+
+/**
+ * as10x_cmd_turn_on - send turn on command to AS10x
+ * @phandle: pointer to AS10x handle
+ *
+ * Return 0 when no error, < 0 in case of error.
+ */
+int as10x_cmd_turn_on(as10x_handle_t *phandle)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.turn_on.req));
+
+ /* fill command */
+ pcmd->body.turn_on.req.proc_id = cpu_to_le16(CONTROL_PROC_TURNON);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+ sizeof(pcmd->body.turn_on.req) +
+ HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.turn_on.rsp) +
+ HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_TURNON_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_turn_off - send turn off command to AS10x
+ * @phandle: pointer to AS10x handle
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_turn_off(as10x_handle_t *phandle)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.turn_off.req));
+
+ /* fill command */
+ pcmd->body.turn_off.req.proc_id = cpu_to_le16(CONTROL_PROC_TURNOFF);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(
+ phandle, (uint8_t *) pcmd,
+ sizeof(pcmd->body.turn_off.req) + HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.turn_off.rsp) + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_TURNOFF_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_set_tune - send set tune command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @ptune: tune parameters
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_set_tune(as10x_handle_t *phandle, struct as10x_tune_args *ptune)
+{
+ int error;
+ struct as10x_cmd_t *preq, *prsp;
+
+ ENTER();
+
+ preq = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(preq, (++phandle->cmd_xid),
+ sizeof(preq->body.set_tune.req));
+
+ /* fill command */
+ preq->body.set_tune.req.proc_id = cpu_to_le16(CONTROL_PROC_SETTUNE);
+ preq->body.set_tune.req.args.freq = cpu_to_le32(ptune->freq);
+ preq->body.set_tune.req.args.bandwidth = ptune->bandwidth;
+ preq->body.set_tune.req.args.hier_select = ptune->hier_select;
+ preq->body.set_tune.req.args.constellation = ptune->constellation;
+ preq->body.set_tune.req.args.hierarchy = ptune->hierarchy;
+ preq->body.set_tune.req.args.interleaving_mode =
+ ptune->interleaving_mode;
+ preq->body.set_tune.req.args.code_rate = ptune->code_rate;
+ preq->body.set_tune.req.args.guard_interval = ptune->guard_interval;
+ preq->body.set_tune.req.args.transmission_mode =
+ ptune->transmission_mode;
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle,
+ (uint8_t *) preq,
+ sizeof(preq->body.set_tune.req)
+ + HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.set_tune.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_SETTUNE_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_get_tune_status - send get tune status command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @pstatus: pointer to updated status structure of the current tune
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_tune_status(as10x_handle_t *phandle,
+ struct as10x_tune_status *pstatus)
+{
+ int error;
+ struct as10x_cmd_t *preq, *prsp;
+
+ ENTER();
+
+ preq = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(preq, (++phandle->cmd_xid),
+ sizeof(preq->body.get_tune_status.req));
+
+ /* fill command */
+ preq->body.get_tune_status.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_GETTUNESTAT);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(
+ phandle,
+ (uint8_t *) preq,
+ sizeof(preq->body.get_tune_status.req) + HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.get_tune_status.rsp) + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_GETTUNESTAT_RSP);
+ if (error < 0)
+ goto out;
+
+ /* Response OK -> get response data */
+ pstatus->tune_state = prsp->body.get_tune_status.rsp.sts.tune_state;
+ pstatus->signal_strength =
+ le16_to_cpu(prsp->body.get_tune_status.rsp.sts.signal_strength);
+ pstatus->PER = le16_to_cpu(prsp->body.get_tune_status.rsp.sts.PER);
+ pstatus->BER = le16_to_cpu(prsp->body.get_tune_status.rsp.sts.BER);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * send get TPS command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @ptps: pointer to TPS parameters structure
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_tps(as10x_handle_t *phandle, struct as10x_tps *ptps)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.get_tps.req));
+
+ /* fill command */
+ pcmd->body.get_tune_status.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_GETTPS);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle,
+ (uint8_t *) pcmd,
+ sizeof(pcmd->body.get_tps.req) +
+ HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.get_tps.rsp) +
+ HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_GETTPS_RSP);
+ if (error < 0)
+ goto out;
+
+ /* Response OK -> get response data */
+ ptps->constellation = prsp->body.get_tps.rsp.tps.constellation;
+ ptps->hierarchy = prsp->body.get_tps.rsp.tps.hierarchy;
+ ptps->interleaving_mode = prsp->body.get_tps.rsp.tps.interleaving_mode;
+ ptps->code_rate_HP = prsp->body.get_tps.rsp.tps.code_rate_HP;
+ ptps->code_rate_LP = prsp->body.get_tps.rsp.tps.code_rate_LP;
+ ptps->guard_interval = prsp->body.get_tps.rsp.tps.guard_interval;
+ ptps->transmission_mode = prsp->body.get_tps.rsp.tps.transmission_mode;
+ ptps->DVBH_mask_HP = prsp->body.get_tps.rsp.tps.DVBH_mask_HP;
+ ptps->DVBH_mask_LP = prsp->body.get_tps.rsp.tps.DVBH_mask_LP;
+ ptps->cell_ID = le16_to_cpu(prsp->body.get_tps.rsp.tps.cell_ID);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_get_demod_stats - send get demod stats command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @pdemod_stats: pointer to demod stats parameters structure
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_demod_stats(as10x_handle_t *phandle,
+ struct as10x_demod_stats *pdemod_stats)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.get_demod_stats.req));
+
+ /* fill command */
+ pcmd->body.get_demod_stats.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_GET_DEMOD_STATS);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle,
+ (uint8_t *) pcmd,
+ sizeof(pcmd->body.get_demod_stats.req)
+ + HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.get_demod_stats.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_GET_DEMOD_STATS_RSP);
+ if (error < 0)
+ goto out;
+
+ /* Response OK -> get response data */
+ pdemod_stats->frame_count =
+ le32_to_cpu(prsp->body.get_demod_stats.rsp.stats.frame_count);
+ pdemod_stats->bad_frame_count =
+ le32_to_cpu(prsp->body.get_demod_stats.rsp.stats.bad_frame_count);
+ pdemod_stats->bytes_fixed_by_rs =
+ le32_to_cpu(prsp->body.get_demod_stats.rsp.stats.bytes_fixed_by_rs);
+ pdemod_stats->mer =
+ le16_to_cpu(prsp->body.get_demod_stats.rsp.stats.mer);
+ pdemod_stats->has_started =
+ prsp->body.get_demod_stats.rsp.stats.has_started;
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_get_impulse_resp - send get impulse response command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @is_ready: pointer to value indicating when impulse
+ * response data is ready
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_impulse_resp(as10x_handle_t *phandle,
+ uint8_t *is_ready)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.get_impulse_rsp.req));
+
+ /* fill command */
+ pcmd->body.get_impulse_rsp.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_GET_IMPULSE_RESP);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle,
+ (uint8_t *) pcmd,
+ sizeof(pcmd->body.get_impulse_rsp.req)
+ + HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.get_impulse_rsp.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_GET_IMPULSE_RESP_RSP);
+ if (error < 0)
+ goto out;
+
+ /* Response OK -> get response data */
+ *is_ready = prsp->body.get_impulse_rsp.rsp.is_ready;
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_build - build AS10x command header
+ * @pcmd: pointer to AS10x command buffer
+ * @xid: sequence id of the command
+ * @cmd_len: length of the command
+ */
+void as10x_cmd_build(struct as10x_cmd_t *pcmd,
+ uint16_t xid, uint16_t cmd_len)
+{
+ pcmd->header.req_id = cpu_to_le16(xid);
+ pcmd->header.prog = cpu_to_le16(SERVICE_PROG_ID);
+ pcmd->header.version = cpu_to_le16(SERVICE_PROG_VERSION);
+ pcmd->header.data_len = cpu_to_le16(cmd_len);
+}
+
+/**
+ * as10x_rsp_parse - Parse command response
+ * @prsp: pointer to AS10x command buffer
+ * @proc_id: id of the command
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_rsp_parse(struct as10x_cmd_t *prsp, uint16_t proc_id)
+{
+ int error;
+
+ /* extract command error code */
+ error = prsp->body.common.rsp.error;
+
+ if ((error == 0) &&
+ (le16_to_cpu(prsp->body.common.rsp.proc_id) == proc_id)) {
+ return 0;
+ }
+
+ return AS10X_CMD_ERROR;
+}
diff --git a/drivers/staging/media/as102/as10x_cmd.h b/drivers/staging/media/as102/as10x_cmd.h
new file mode 100644
index 0000000..01a7163
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd.h
@@ -0,0 +1,540 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _AS10X_CMD_H_
+#define _AS10X_CMD_H_
+
+#ifdef __KERNEL__
+#include <linux/kernel.h>
+#endif
+
+#include "as10x_types.h"
+
+/*********************************/
+/* MACRO DEFINITIONS */
+/*********************************/
+#define AS10X_CMD_ERROR -1
+
+#define SERVICE_PROG_ID 0x0002
+#define SERVICE_PROG_VERSION 0x0001
+
+#define HIER_NONE 0x00
+#define HIER_LOW_PRIORITY 0x01
+
+#define HEADER_SIZE (sizeof(struct as10x_cmd_header_t))
+
+/* context request types */
+#define GET_CONTEXT_DATA 1
+#define SET_CONTEXT_DATA 2
+
+/* ODSP suspend modes */
+#define CFG_MODE_ODSP_RESUME 0
+#define CFG_MODE_ODSP_SUSPEND 1
+
+/* Dump memory size */
+#define DUMP_BLOCK_SIZE_MAX 0x20
+
+/*********************************/
+/* TYPE DEFINITION */
+/*********************************/
+typedef enum {
+ CONTROL_PROC_TURNON = 0x0001,
+ CONTROL_PROC_TURNON_RSP = 0x0100,
+ CONTROL_PROC_SET_REGISTER = 0x0002,
+ CONTROL_PROC_SET_REGISTER_RSP = 0x0200,
+ CONTROL_PROC_GET_REGISTER = 0x0003,
+ CONTROL_PROC_GET_REGISTER_RSP = 0x0300,
+ CONTROL_PROC_SETTUNE = 0x000A,
+ CONTROL_PROC_SETTUNE_RSP = 0x0A00,
+ CONTROL_PROC_GETTUNESTAT = 0x000B,
+ CONTROL_PROC_GETTUNESTAT_RSP = 0x0B00,
+ CONTROL_PROC_GETTPS = 0x000D,
+ CONTROL_PROC_GETTPS_RSP = 0x0D00,
+ CONTROL_PROC_SETFILTER = 0x000E,
+ CONTROL_PROC_SETFILTER_RSP = 0x0E00,
+ CONTROL_PROC_REMOVEFILTER = 0x000F,
+ CONTROL_PROC_REMOVEFILTER_RSP = 0x0F00,
+ CONTROL_PROC_GET_IMPULSE_RESP = 0x0012,
+ CONTROL_PROC_GET_IMPULSE_RESP_RSP = 0x1200,
+ CONTROL_PROC_START_STREAMING = 0x0013,
+ CONTROL_PROC_START_STREAMING_RSP = 0x1300,
+ CONTROL_PROC_STOP_STREAMING = 0x0014,
+ CONTROL_PROC_STOP_STREAMING_RSP = 0x1400,
+ CONTROL_PROC_GET_DEMOD_STATS = 0x0015,
+ CONTROL_PROC_GET_DEMOD_STATS_RSP = 0x1500,
+ CONTROL_PROC_ELNA_CHANGE_MODE = 0x0016,
+ CONTROL_PROC_ELNA_CHANGE_MODE_RSP = 0x1600,
+ CONTROL_PROC_ODSP_CHANGE_MODE = 0x0017,
+ CONTROL_PROC_ODSP_CHANGE_MODE_RSP = 0x1700,
+ CONTROL_PROC_AGC_CHANGE_MODE = 0x0018,
+ CONTROL_PROC_AGC_CHANGE_MODE_RSP = 0x1800,
+
+ CONTROL_PROC_CONTEXT = 0x00FC,
+ CONTROL_PROC_CONTEXT_RSP = 0xFC00,
+ CONTROL_PROC_DUMP_MEMORY = 0x00FD,
+ CONTROL_PROC_DUMP_MEMORY_RSP = 0xFD00,
+ CONTROL_PROC_DUMPLOG_MEMORY = 0x00FE,
+ CONTROL_PROC_DUMPLOG_MEMORY_RSP = 0xFE00,
+ CONTROL_PROC_TURNOFF = 0x00FF,
+ CONTROL_PROC_TURNOFF_RSP = 0xFF00
+} control_proc;
+
+
+#pragma pack(1)
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ } rsp;
+} TURN_ON;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t err;
+ } rsp;
+} TURN_OFF;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* tune params */
+ struct as10x_tune_args args;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* response error */
+ uint8_t error;
+ } rsp;
+} SET_TUNE;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* response error */
+ uint8_t error;
+ /* tune status */
+ struct as10x_tune_status sts;
+ } rsp;
+} GET_TUNE_STATUS;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* response error */
+ uint8_t error;
+ /* tps details */
+ struct as10x_tps tps;
+ } rsp;
+} GET_TPS;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* response error */
+ uint8_t error;
+ } rsp;
+} COMMON;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* PID to filter */
+ uint16_t pid;
+ /* stream type (MPE, PSI/SI or PES )*/
+ uint8_t stream_type;
+ /* PID index in filter table */
+ uint8_t idx;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* response error */
+ uint8_t error;
+ /* Filter id */
+ uint8_t filter_id;
+ } rsp;
+} ADD_PID_FILTER;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* PID to remove */
+ uint16_t pid;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* response error */
+ uint8_t error;
+ } rsp;
+} DEL_PID_FILTER;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ } rsp;
+} START_STREAMING;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ } rsp;
+} STOP_STREAMING;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ /* demod stats */
+ struct as10x_demod_stats stats;
+ } rsp;
+} GET_DEMOD_STATS;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ /* impulse response ready */
+ uint8_t is_ready;
+ } rsp;
+} GET_IMPULSE_RESP;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* value to write (for set context)*/
+ struct as10x_register_value reg_val;
+ /* context tag */
+ uint16_t tag;
+ /* context request type */
+ uint16_t type;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* value read (for get context) */
+ struct as10x_register_value reg_val;
+ /* context request type */
+ uint16_t type;
+ /* error */
+ uint8_t error;
+ } rsp;
+} FW_CONTEXT;
+
+typedef union {
+ /* request */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* register description */
+ struct as10x_register_addr reg_addr;
+ /* register content */
+ struct as10x_register_value reg_val;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ } rsp;
+} SET_REGISTER;
+
+typedef union {
+ /* request */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* register description */
+ struct as10x_register_addr reg_addr;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ /* register content */
+ struct as10x_register_value reg_val;
+ } rsp;
+} GET_REGISTER;
+
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* mode */
+ uint8_t mode;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ } rsp;
+} CFG_CHANGE_MODE;
+
+struct as10x_cmd_header_t {
+ uint16_t req_id;
+ uint16_t prog;
+ uint16_t version;
+ uint16_t data_len;
+};
+
+#define DUMP_BLOCK_SIZE 16
+typedef union {
+ /* request */
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* dump memory type request */
+ uint8_t dump_req;
+ /* register description */
+ struct as10x_register_addr reg_addr;
+ /* nb blocks to read */
+ uint16_t num_blocks;
+ } req;
+ /* response */
+ struct {
+ /* response identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ /* dump response */
+ uint8_t dump_rsp;
+ /* data */
+ union {
+ uint8_t data8[DUMP_BLOCK_SIZE];
+ uint16_t data16[DUMP_BLOCK_SIZE / sizeof(uint16_t)];
+ uint32_t data32[DUMP_BLOCK_SIZE / sizeof(uint32_t)];
+ } u;
+ } rsp;
+} DUMP_MEMORY;
+
+typedef union {
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* dump memory type request */
+ uint8_t dump_req;
+ } req;
+ struct {
+ /* request identifier */
+ uint16_t proc_id;
+ /* error */
+ uint8_t error;
+ /* dump response */
+ uint8_t dump_rsp;
+ /* dump data */
+ uint8_t data[DUMP_BLOCK_SIZE];
+ } rsp;
+} DUMPLOG_MEMORY;
+
+typedef union {
+ /* request */
+ struct {
+ uint16_t proc_id;
+ uint8_t data[64 - sizeof(struct as10x_cmd_header_t) -2 /* proc_id */];
+ } req;
+ /* response */
+ struct {
+ uint16_t proc_id;
+ uint8_t error;
+ uint8_t data[64 - sizeof(struct as10x_cmd_header_t) /* header */
+ - 2 /* proc_id */ - 1 /* rc */];
+ } rsp;
+} RAW_DATA;
+
+struct as10x_cmd_t {
+ /* header */
+ struct as10x_cmd_header_t header;
+ /* body */
+ union {
+ TURN_ON turn_on;
+ TURN_OFF turn_off;
+ SET_TUNE set_tune;
+ GET_TUNE_STATUS get_tune_status;
+ GET_TPS get_tps;
+ COMMON common;
+ ADD_PID_FILTER add_pid_filter;
+ DEL_PID_FILTER del_pid_filter;
+ START_STREAMING start_streaming;
+ STOP_STREAMING stop_streaming;
+ GET_DEMOD_STATS get_demod_stats;
+ GET_IMPULSE_RESP get_impulse_rsp;
+ FW_CONTEXT context;
+ SET_REGISTER set_register;
+ GET_REGISTER get_register;
+ CFG_CHANGE_MODE cfg_change_mode;
+ DUMP_MEMORY dump_memory;
+ DUMPLOG_MEMORY dumplog_memory;
+ RAW_DATA raw_data;
+ } body;
+};
+
+struct as10x_token_cmd_t {
+ /* token cmd */
+ struct as10x_cmd_t c;
+ /* token response */
+ struct as10x_cmd_t r;
+};
+#pragma pack()
+
+
+/**************************/
+/* FUNCTION DECLARATION */
+/**************************/
+
+void as10x_cmd_build(struct as10x_cmd_t *pcmd, uint16_t proc_id,
+ uint16_t cmd_len);
+int as10x_rsp_parse(struct as10x_cmd_t *r, uint16_t proc_id);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* as10x cmd */
+int as10x_cmd_turn_on(as10x_handle_t *phandle);
+int as10x_cmd_turn_off(as10x_handle_t *phandle);
+
+int as10x_cmd_set_tune(as10x_handle_t *phandle,
+ struct as10x_tune_args *ptune);
+
+int as10x_cmd_get_tune_status(as10x_handle_t *phandle,
+ struct as10x_tune_status *pstatus);
+
+int as10x_cmd_get_tps(as10x_handle_t *phandle,
+ struct as10x_tps *ptps);
+
+int as10x_cmd_get_demod_stats(as10x_handle_t *phandle,
+ struct as10x_demod_stats *pdemod_stats);
+
+int as10x_cmd_get_impulse_resp(as10x_handle_t *phandle,
+ uint8_t *is_ready);
+
+/* as10x cmd stream */
+int as10x_cmd_add_PID_filter(as10x_handle_t *phandle,
+ struct as10x_ts_filter *filter);
+int as10x_cmd_del_PID_filter(as10x_handle_t *phandle,
+ uint16_t pid_value);
+
+int as10x_cmd_start_streaming(as10x_handle_t *phandle);
+int as10x_cmd_stop_streaming(as10x_handle_t *phandle);
+
+/* as10x cmd cfg */
+int as10x_cmd_set_context(as10x_handle_t *phandle,
+ uint16_t tag,
+ uint32_t value);
+int as10x_cmd_get_context(as10x_handle_t *phandle,
+ uint16_t tag,
+ uint32_t *pvalue);
+
+int as10x_cmd_eLNA_change_mode(as10x_handle_t *phandle, uint8_t mode);
+int as10x_context_rsp_parse(struct as10x_cmd_t *prsp, uint16_t proc_id);
+#ifdef __cplusplus
+}
+#endif
+#endif
+/* EOF - vim: set textwidth=80 ts=3 sw=3 sts=3 et: */
diff --git a/drivers/staging/media/as102/as10x_cmd_cfg.c b/drivers/staging/media/as102/as10x_cmd_cfg.c
new file mode 100644
index 0000000..ec6f69f
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd_cfg.c
@@ -0,0 +1,215 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include "as102_drv.h"
+#include "as10x_types.h"
+#include "as10x_cmd.h"
+
+/***************************/
+/* FUNCTION DEFINITION */
+/***************************/
+
+/**
+ * as10x_cmd_get_context - Send get context command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @tag: context tag
+ * @pvalue: pointer where to store context value read
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_get_context(as10x_handle_t *phandle, uint16_t tag,
+ uint32_t *pvalue)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.context.req));
+
+ /* fill command */
+ pcmd->body.context.req.proc_id = cpu_to_le16(CONTROL_PROC_CONTEXT);
+ pcmd->body.context.req.tag = cpu_to_le16(tag);
+ pcmd->body.context.req.type = cpu_to_le16(GET_CONTEXT_DATA);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle,
+ (uint8_t *) pcmd,
+ sizeof(pcmd->body.context.req)
+ + HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.context.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response: context command do not follow the common response */
+ /* structure -> specific handling response parse required */
+ error = as10x_context_rsp_parse(prsp, CONTROL_PROC_CONTEXT_RSP);
+
+ if (error == 0) {
+ /* Response OK -> get response data */
+ *pvalue = le32_to_cpu(prsp->body.context.rsp.reg_val.u.value32);
+ /* value returned is always a 32-bit value */
+ }
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_set_context - send set context command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @tag: context tag
+ * @value: value to set in context
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_set_context(as10x_handle_t *phandle, uint16_t tag,
+ uint32_t value)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.context.req));
+
+ /* fill command */
+ pcmd->body.context.req.proc_id = cpu_to_le16(CONTROL_PROC_CONTEXT);
+ /* pcmd->body.context.req.reg_val.mode initialization is not required */
+ pcmd->body.context.req.reg_val.u.value32 = cpu_to_le32(value);
+ pcmd->body.context.req.tag = cpu_to_le16(tag);
+ pcmd->body.context.req.type = cpu_to_le16(SET_CONTEXT_DATA);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle,
+ (uint8_t *) pcmd,
+ sizeof(pcmd->body.context.req)
+ + HEADER_SIZE,
+ (uint8_t *) prsp,
+ sizeof(prsp->body.context.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response: context command do not follow the common response */
+ /* structure -> specific handling response parse required */
+ error = as10x_context_rsp_parse(prsp, CONTROL_PROC_CONTEXT_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_eLNA_change_mode - send eLNA change mode command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @mode: mode selected:
+ * - ON : 0x0 => eLNA always ON
+ * - OFF : 0x1 => eLNA always OFF
+ * - AUTO : 0x2 => eLNA follow hysteresis parameters
+ * to be ON or OFF
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_eLNA_change_mode(as10x_handle_t *phandle, uint8_t mode)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.cfg_change_mode.req));
+
+ /* fill command */
+ pcmd->body.cfg_change_mode.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_ELNA_CHANGE_MODE);
+ pcmd->body.cfg_change_mode.req.mode = mode;
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+ sizeof(pcmd->body.cfg_change_mode.req)
+ + HEADER_SIZE, (uint8_t *) prsp,
+ sizeof(prsp->body.cfg_change_mode.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_ELNA_CHANGE_MODE_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_context_rsp_parse - Parse context command response
+ * @prsp: pointer to AS10x command response buffer
+ * @proc_id: id of the command
+ *
+ * Since the contex command reponse does not follow the common
+ * response, a specific parse function is required.
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_context_rsp_parse(struct as10x_cmd_t *prsp, uint16_t proc_id)
+{
+ int err;
+
+ err = prsp->body.context.rsp.error;
+
+ if ((err == 0) &&
+ (le16_to_cpu(prsp->body.context.rsp.proc_id) == proc_id)) {
+ return 0;
+ }
+ return AS10X_CMD_ERROR;
+}
diff --git a/drivers/staging/media/as102/as10x_cmd_stream.c b/drivers/staging/media/as102/as10x_cmd_stream.c
new file mode 100644
index 0000000..045c706
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_cmd_stream.c
@@ -0,0 +1,223 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include "as102_drv.h"
+#include "as10x_cmd.h"
+
+/**
+ * as10x_cmd_add_PID_filter - send add filter command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @filter: TSFilter filter for DVB-T
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_add_PID_filter(as10x_handle_t *phandle,
+ struct as10x_ts_filter *filter)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.add_pid_filter.req));
+
+ /* fill command */
+ pcmd->body.add_pid_filter.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_SETFILTER);
+ pcmd->body.add_pid_filter.req.pid = cpu_to_le16(filter->pid);
+ pcmd->body.add_pid_filter.req.stream_type = filter->type;
+
+ if (filter->idx < 16)
+ pcmd->body.add_pid_filter.req.idx = filter->idx;
+ else
+ pcmd->body.add_pid_filter.req.idx = 0xFF;
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+ sizeof(pcmd->body.add_pid_filter.req)
+ + HEADER_SIZE, (uint8_t *) prsp,
+ sizeof(prsp->body.add_pid_filter.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_SETFILTER_RSP);
+
+ if (error == 0) {
+ /* Response OK -> get response data */
+ filter->idx = prsp->body.add_pid_filter.rsp.filter_id;
+ }
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_del_PID_filter - Send delete filter command to AS10x
+ * @phandle: pointer to AS10x handle
+ * @pid_value: PID to delete
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_del_PID_filter(as10x_handle_t *phandle,
+ uint16_t pid_value)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.del_pid_filter.req));
+
+ /* fill command */
+ pcmd->body.del_pid_filter.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_REMOVEFILTER);
+ pcmd->body.del_pid_filter.req.pid = cpu_to_le16(pid_value);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+ sizeof(pcmd->body.del_pid_filter.req)
+ + HEADER_SIZE, (uint8_t *) prsp,
+ sizeof(prsp->body.del_pid_filter.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_REMOVEFILTER_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_start_streaming - Send start streaming command to AS10x
+ * @phandle: pointer to AS10x handle
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_start_streaming(as10x_handle_t *phandle)
+{
+ int error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.start_streaming.req));
+
+ /* fill command */
+ pcmd->body.start_streaming.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_START_STREAMING);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+ sizeof(pcmd->body.start_streaming.req)
+ + HEADER_SIZE, (uint8_t *) prsp,
+ sizeof(prsp->body.start_streaming.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_START_STREAMING_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
+
+/**
+ * as10x_cmd_stop_streaming - Send stop streaming command to AS10x
+ * @phandle: pointer to AS10x handle
+ *
+ * Return 0 on success or negative value in case of error.
+ */
+int as10x_cmd_stop_streaming(as10x_handle_t *phandle)
+{
+ int8_t error;
+ struct as10x_cmd_t *pcmd, *prsp;
+
+ ENTER();
+
+ pcmd = phandle->cmd;
+ prsp = phandle->rsp;
+
+ /* prepare command */
+ as10x_cmd_build(pcmd, (++phandle->cmd_xid),
+ sizeof(pcmd->body.stop_streaming.req));
+
+ /* fill command */
+ pcmd->body.stop_streaming.req.proc_id =
+ cpu_to_le16(CONTROL_PROC_STOP_STREAMING);
+
+ /* send command */
+ if (phandle->ops->xfer_cmd) {
+ error = phandle->ops->xfer_cmd(phandle, (uint8_t *) pcmd,
+ sizeof(pcmd->body.stop_streaming.req)
+ + HEADER_SIZE, (uint8_t *) prsp,
+ sizeof(prsp->body.stop_streaming.rsp)
+ + HEADER_SIZE);
+ } else {
+ error = AS10X_CMD_ERROR;
+ }
+
+ if (error < 0)
+ goto out;
+
+ /* parse response */
+ error = as10x_rsp_parse(prsp, CONTROL_PROC_STOP_STREAMING_RSP);
+
+out:
+ LEAVE();
+ return error;
+}
diff --git a/drivers/staging/media/as102/as10x_handle.h b/drivers/staging/media/as102/as10x_handle.h
new file mode 100644
index 0000000..4f01a76
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_handle.h
@@ -0,0 +1,58 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifdef __KERNEL__
+struct as102_bus_adapter_t;
+struct as102_dev_t;
+
+#define as10x_handle_t struct as102_bus_adapter_t
+#include "as10x_cmd.h"
+
+/* values for "mode" field */
+#define REGMODE8 8
+#define REGMODE16 16
+#define REGMODE32 32
+
+struct as102_priv_ops_t {
+ int (*upload_fw_pkt) (struct as102_bus_adapter_t *bus_adap,
+ unsigned char *buf, int buflen, int swap32);
+
+ int (*send_cmd) (struct as102_bus_adapter_t *bus_adap,
+ unsigned char *buf, int buflen);
+
+ int (*xfer_cmd) (struct as102_bus_adapter_t *bus_adap,
+ unsigned char *send_buf, int send_buf_len,
+ unsigned char *recv_buf, int recv_buf_len);
+/*
+ int (*pid_filter) (struct as102_bus_adapter_t *bus_adap,
+ int index, u16 pid, int onoff);
+*/
+ int (*start_stream) (struct as102_dev_t *dev);
+ void (*stop_stream) (struct as102_dev_t *dev);
+
+ int (*reset_target) (struct as102_bus_adapter_t *bus_adap);
+
+ int (*read_write)(struct as102_bus_adapter_t *bus_adap, uint8_t mode,
+ uint32_t rd_addr, uint16_t rd_len,
+ uint32_t wr_addr, uint16_t wr_len);
+
+ int (*as102_read_ep2) (struct as102_bus_adapter_t *bus_adap,
+ unsigned char *recv_buf,
+ int recv_buf_len);
+};
+#endif
diff --git a/drivers/staging/media/as102/as10x_types.h b/drivers/staging/media/as102/as10x_types.h
new file mode 100644
index 0000000..3dedb3c
--- /dev/null
+++ b/drivers/staging/media/as102/as10x_types.h
@@ -0,0 +1,198 @@
+/*
+ * Abilis Systems Single DVB-T Receiver
+ * Copyright (C) 2008 Pierrick Hascoet <pierrick.hascoet@abilis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _AS10X_TYPES_H_
+#define _AS10X_TYPES_H_
+
+#include "as10x_handle.h"
+
+/*********************************/
+/* MACRO DEFINITIONS */
+/*********************************/
+
+/* bandwidth constant values */
+#define BW_5_MHZ 0x00
+#define BW_6_MHZ 0x01
+#define BW_7_MHZ 0x02
+#define BW_8_MHZ 0x03
+
+/* hierarchy priority selection values */
+#define HIER_NO_PRIORITY 0x00
+#define HIER_LOW_PRIORITY 0x01
+#define HIER_HIGH_PRIORITY 0x02
+
+/* constellation available values */
+#define CONST_QPSK 0x00
+#define CONST_QAM16 0x01
+#define CONST_QAM64 0x02
+#define CONST_UNKNOWN 0xFF
+
+/* hierarchy available values */
+#define HIER_NONE 0x00
+#define HIER_ALPHA_1 0x01
+#define HIER_ALPHA_2 0x02
+#define HIER_ALPHA_4 0x03
+#define HIER_UNKNOWN 0xFF
+
+/* interleaving available values */
+#define INTLV_NATIVE 0x00
+#define INTLV_IN_DEPTH 0x01
+#define INTLV_UNKNOWN 0xFF
+
+/* code rate available values */
+#define CODE_RATE_1_2 0x00
+#define CODE_RATE_2_3 0x01
+#define CODE_RATE_3_4 0x02
+#define CODE_RATE_5_6 0x03
+#define CODE_RATE_7_8 0x04
+#define CODE_RATE_UNKNOWN 0xFF
+
+/* guard interval available values */
+#define GUARD_INT_1_32 0x00
+#define GUARD_INT_1_16 0x01
+#define GUARD_INT_1_8 0x02
+#define GUARD_INT_1_4 0x03
+#define GUARD_UNKNOWN 0xFF
+
+/* transmission mode available values */
+#define TRANS_MODE_2K 0x00
+#define TRANS_MODE_8K 0x01
+#define TRANS_MODE_4K 0x02
+#define TRANS_MODE_UNKNOWN 0xFF
+
+/* DVBH signalling available values */
+#define TIMESLICING_PRESENT 0x01
+#define MPE_FEC_PRESENT 0x02
+
+/* tune state available */
+#define TUNE_STATUS_NOT_TUNED 0x00
+#define TUNE_STATUS_IDLE 0x01
+#define TUNE_STATUS_LOCKING 0x02
+#define TUNE_STATUS_SIGNAL_DVB_OK 0x03
+#define TUNE_STATUS_STREAM_DETECTED 0x04
+#define TUNE_STATUS_STREAM_TUNED 0x05
+#define TUNE_STATUS_ERROR 0xFF
+
+/* available TS FID filter types */
+#define TS_PID_TYPE_TS 0
+#define TS_PID_TYPE_PSI_SI 1
+#define TS_PID_TYPE_MPE 2
+
+/* number of echos available */
+#define MAX_ECHOS 15
+
+/* Context types */
+#define CONTEXT_LNA 1010
+#define CONTEXT_ELNA_HYSTERESIS 4003
+#define CONTEXT_ELNA_GAIN 4004
+#define CONTEXT_MER_THRESHOLD 5005
+#define CONTEXT_MER_OFFSET 5006
+#define CONTEXT_IR_STATE 7000
+#define CONTEXT_TSOUT_MSB_FIRST 7004
+#define CONTEXT_TSOUT_FALLING_EDGE 7005
+
+/* Configuration modes */
+#define CFG_MODE_ON 0
+#define CFG_MODE_OFF 1
+#define CFG_MODE_AUTO 2
+
+#pragma pack(1)
+struct as10x_tps {
+ uint8_t constellation;
+ uint8_t hierarchy;
+ uint8_t interleaving_mode;
+ uint8_t code_rate_HP;
+ uint8_t code_rate_LP;
+ uint8_t guard_interval;
+ uint8_t transmission_mode;
+ uint8_t DVBH_mask_HP;
+ uint8_t DVBH_mask_LP;
+ uint16_t cell_ID;
+};
+
+struct as10x_tune_args {
+ /* frequency */
+ uint32_t freq;
+ /* bandwidth */
+ uint8_t bandwidth;
+ /* hierarchy selection */
+ uint8_t hier_select;
+ /* constellation */
+ uint8_t constellation;
+ /* hierarchy */
+ uint8_t hierarchy;
+ /* interleaving mode */
+ uint8_t interleaving_mode;
+ /* code rate */
+ uint8_t code_rate;
+ /* guard interval */
+ uint8_t guard_interval;
+ /* transmission mode */
+ uint8_t transmission_mode;
+};
+
+struct as10x_tune_status {
+ /* tune status */
+ uint8_t tune_state;
+ /* signal strength */
+ int16_t signal_strength;
+ /* packet error rate 10^-4 */
+ uint16_t PER;
+ /* bit error rate 10^-4 */
+ uint16_t BER;
+};
+
+struct as10x_demod_stats {
+ /* frame counter */
+ uint32_t frame_count;
+ /* Bad frame counter */
+ uint32_t bad_frame_count;
+ /* Number of wrong bytes fixed by Reed-Solomon */
+ uint32_t bytes_fixed_by_rs;
+ /* Averaged MER */
+ uint16_t mer;
+ /* statistics calculation state indicator (started or not) */
+ uint8_t has_started;
+};
+
+struct as10x_ts_filter {
+ uint16_t pid; /** valid PID value 0x00 : 0x2000 */
+ uint8_t type; /** Red TS_PID_TYPE_<N> values */
+ uint8_t idx; /** index in filtering table */
+};
+
+struct as10x_register_value {
+ uint8_t mode;
+ union {
+ uint8_t value8; /* 8 bit value */
+ uint16_t value16; /* 16 bit value */
+ uint32_t value32; /* 32 bit value */
+ }u;
+};
+
+#pragma pack()
+
+struct as10x_register_addr {
+ /* register addr */
+ uint32_t addr;
+ /* register mode access */
+ uint8_t mode;
+};
+
+
+#endif
diff --git a/drivers/staging/cxd2099/Kconfig b/drivers/staging/media/cxd2099/Kconfig
similarity index 100%
rename from drivers/staging/cxd2099/Kconfig
rename to drivers/staging/media/cxd2099/Kconfig
diff --git a/drivers/staging/cxd2099/Makefile b/drivers/staging/media/cxd2099/Makefile
similarity index 100%
rename from drivers/staging/cxd2099/Makefile
rename to drivers/staging/media/cxd2099/Makefile
diff --git a/drivers/staging/cxd2099/TODO b/drivers/staging/media/cxd2099/TODO
similarity index 100%
rename from drivers/staging/cxd2099/TODO
rename to drivers/staging/media/cxd2099/TODO
diff --git a/drivers/staging/cxd2099/cxd2099.c b/drivers/staging/media/cxd2099/cxd2099.c
similarity index 100%
rename from drivers/staging/cxd2099/cxd2099.c
rename to drivers/staging/media/cxd2099/cxd2099.c
diff --git a/drivers/staging/cxd2099/cxd2099.h b/drivers/staging/media/cxd2099/cxd2099.h
similarity index 100%
rename from drivers/staging/cxd2099/cxd2099.h
rename to drivers/staging/media/cxd2099/cxd2099.h
diff --git a/drivers/staging/dt3155v4l/Kconfig b/drivers/staging/media/dt3155v4l/Kconfig
similarity index 100%
rename from drivers/staging/dt3155v4l/Kconfig
rename to drivers/staging/media/dt3155v4l/Kconfig
diff --git a/drivers/staging/dt3155v4l/Makefile b/drivers/staging/media/dt3155v4l/Makefile
similarity index 100%
rename from drivers/staging/dt3155v4l/Makefile
rename to drivers/staging/media/dt3155v4l/Makefile
diff --git a/drivers/staging/dt3155v4l/dt3155v4l.c b/drivers/staging/media/dt3155v4l/dt3155v4l.c
similarity index 100%
rename from drivers/staging/dt3155v4l/dt3155v4l.c
rename to drivers/staging/media/dt3155v4l/dt3155v4l.c
diff --git a/drivers/staging/dt3155v4l/dt3155v4l.h b/drivers/staging/media/dt3155v4l/dt3155v4l.h
similarity index 100%
rename from drivers/staging/dt3155v4l/dt3155v4l.h
rename to drivers/staging/media/dt3155v4l/dt3155v4l.h
diff --git a/drivers/staging/easycap/Kconfig b/drivers/staging/media/easycap/Kconfig
similarity index 100%
rename from drivers/staging/easycap/Kconfig
rename to drivers/staging/media/easycap/Kconfig
diff --git a/drivers/staging/easycap/Makefile b/drivers/staging/media/easycap/Makefile
similarity index 100%
rename from drivers/staging/easycap/Makefile
rename to drivers/staging/media/easycap/Makefile
diff --git a/drivers/staging/easycap/README b/drivers/staging/media/easycap/README
similarity index 100%
rename from drivers/staging/easycap/README
rename to drivers/staging/media/easycap/README
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/media/easycap/easycap.h
similarity index 100%
rename from drivers/staging/easycap/easycap.h
rename to drivers/staging/media/easycap/easycap.h
diff --git a/drivers/staging/easycap/easycap_ioctl.c b/drivers/staging/media/easycap/easycap_ioctl.c
similarity index 100%
rename from drivers/staging/easycap/easycap_ioctl.c
rename to drivers/staging/media/easycap/easycap_ioctl.c
diff --git a/drivers/staging/easycap/easycap_low.c b/drivers/staging/media/easycap/easycap_low.c
similarity index 100%
rename from drivers/staging/easycap/easycap_low.c
rename to drivers/staging/media/easycap/easycap_low.c
diff --git a/drivers/staging/easycap/easycap_main.c b/drivers/staging/media/easycap/easycap_main.c
similarity index 100%
rename from drivers/staging/easycap/easycap_main.c
rename to drivers/staging/media/easycap/easycap_main.c
diff --git a/drivers/staging/easycap/easycap_settings.c b/drivers/staging/media/easycap/easycap_settings.c
similarity index 100%
rename from drivers/staging/easycap/easycap_settings.c
rename to drivers/staging/media/easycap/easycap_settings.c
diff --git a/drivers/staging/easycap/easycap_sound.c b/drivers/staging/media/easycap/easycap_sound.c
similarity index 100%
rename from drivers/staging/easycap/easycap_sound.c
rename to drivers/staging/media/easycap/easycap_sound.c
diff --git a/drivers/staging/easycap/easycap_testcard.c b/drivers/staging/media/easycap/easycap_testcard.c
similarity index 100%
rename from drivers/staging/easycap/easycap_testcard.c
rename to drivers/staging/media/easycap/easycap_testcard.c
diff --git a/drivers/staging/go7007/Kconfig b/drivers/staging/media/go7007/Kconfig
similarity index 100%
rename from drivers/staging/go7007/Kconfig
rename to drivers/staging/media/go7007/Kconfig
diff --git a/drivers/staging/go7007/Makefile b/drivers/staging/media/go7007/Makefile
similarity index 100%
rename from drivers/staging/go7007/Makefile
rename to drivers/staging/media/go7007/Makefile
diff --git a/drivers/staging/go7007/README b/drivers/staging/media/go7007/README
similarity index 100%
rename from drivers/staging/go7007/README
rename to drivers/staging/media/go7007/README
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/media/go7007/go7007-driver.c
similarity index 100%
rename from drivers/staging/go7007/go7007-driver.c
rename to drivers/staging/media/go7007/go7007-driver.c
diff --git a/drivers/staging/go7007/go7007-fw.c b/drivers/staging/media/go7007/go7007-fw.c
similarity index 100%
rename from drivers/staging/go7007/go7007-fw.c
rename to drivers/staging/media/go7007/go7007-fw.c
diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/media/go7007/go7007-i2c.c
similarity index 100%
rename from drivers/staging/go7007/go7007-i2c.c
rename to drivers/staging/media/go7007/go7007-i2c.c
diff --git a/drivers/staging/go7007/go7007-priv.h b/drivers/staging/media/go7007/go7007-priv.h
similarity index 100%
rename from drivers/staging/go7007/go7007-priv.h
rename to drivers/staging/media/go7007/go7007-priv.h
diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/media/go7007/go7007-usb.c
similarity index 100%
rename from drivers/staging/go7007/go7007-usb.c
rename to drivers/staging/media/go7007/go7007-usb.c
diff --git a/drivers/staging/go7007/go7007-v4l2.c b/drivers/staging/media/go7007/go7007-v4l2.c
similarity index 100%
rename from drivers/staging/go7007/go7007-v4l2.c
rename to drivers/staging/media/go7007/go7007-v4l2.c
diff --git a/drivers/staging/go7007/go7007.h b/drivers/staging/media/go7007/go7007.h
similarity index 100%
rename from drivers/staging/go7007/go7007.h
rename to drivers/staging/media/go7007/go7007.h
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/media/go7007/go7007.txt
similarity index 100%
rename from drivers/staging/go7007/go7007.txt
rename to drivers/staging/media/go7007/go7007.txt
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/media/go7007/s2250-board.c
similarity index 100%
rename from drivers/staging/go7007/s2250-board.c
rename to drivers/staging/media/go7007/s2250-board.c
diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/media/go7007/s2250-loader.c
similarity index 100%
rename from drivers/staging/go7007/s2250-loader.c
rename to drivers/staging/media/go7007/s2250-loader.c
diff --git a/drivers/staging/go7007/s2250-loader.h b/drivers/staging/media/go7007/s2250-loader.h
similarity index 100%
rename from drivers/staging/go7007/s2250-loader.h
rename to drivers/staging/media/go7007/s2250-loader.h
diff --git a/drivers/staging/go7007/saa7134-go7007.c b/drivers/staging/media/go7007/saa7134-go7007.c
similarity index 100%
rename from drivers/staging/go7007/saa7134-go7007.c
rename to drivers/staging/media/go7007/saa7134-go7007.c
diff --git a/drivers/staging/go7007/snd-go7007.c b/drivers/staging/media/go7007/snd-go7007.c
similarity index 100%
rename from drivers/staging/go7007/snd-go7007.c
rename to drivers/staging/media/go7007/snd-go7007.c
diff --git a/drivers/staging/go7007/wis-i2c.h b/drivers/staging/media/go7007/wis-i2c.h
similarity index 100%
rename from drivers/staging/go7007/wis-i2c.h
rename to drivers/staging/media/go7007/wis-i2c.h
diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/media/go7007/wis-ov7640.c
similarity index 100%
rename from drivers/staging/go7007/wis-ov7640.c
rename to drivers/staging/media/go7007/wis-ov7640.c
diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/media/go7007/wis-saa7113.c
similarity index 100%
rename from drivers/staging/go7007/wis-saa7113.c
rename to drivers/staging/media/go7007/wis-saa7113.c
diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/media/go7007/wis-saa7115.c
similarity index 100%
rename from drivers/staging/go7007/wis-saa7115.c
rename to drivers/staging/media/go7007/wis-saa7115.c
diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/media/go7007/wis-sony-tuner.c
similarity index 100%
rename from drivers/staging/go7007/wis-sony-tuner.c
rename to drivers/staging/media/go7007/wis-sony-tuner.c
diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/media/go7007/wis-tw2804.c
similarity index 100%
rename from drivers/staging/go7007/wis-tw2804.c
rename to drivers/staging/media/go7007/wis-tw2804.c
diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/media/go7007/wis-tw9903.c
similarity index 100%
rename from drivers/staging/go7007/wis-tw9903.c
rename to drivers/staging/media/go7007/wis-tw9903.c
diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/media/go7007/wis-uda1342.c
similarity index 100%
rename from drivers/staging/go7007/wis-uda1342.c
rename to drivers/staging/media/go7007/wis-uda1342.c
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/media/lirc/Kconfig
similarity index 100%
rename from drivers/staging/lirc/Kconfig
rename to drivers/staging/media/lirc/Kconfig
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/media/lirc/Makefile
similarity index 100%
rename from drivers/staging/lirc/Makefile
rename to drivers/staging/media/lirc/Makefile
diff --git a/drivers/staging/lirc/TODO b/drivers/staging/media/lirc/TODO
similarity index 100%
rename from drivers/staging/lirc/TODO
rename to drivers/staging/media/lirc/TODO
diff --git a/drivers/staging/lirc/TODO.lirc_zilog b/drivers/staging/media/lirc/TODO.lirc_zilog
similarity index 100%
rename from drivers/staging/lirc/TODO.lirc_zilog
rename to drivers/staging/media/lirc/TODO.lirc_zilog
diff --git a/drivers/staging/lirc/lirc_bt829.c b/drivers/staging/media/lirc/lirc_bt829.c
similarity index 100%
rename from drivers/staging/lirc/lirc_bt829.c
rename to drivers/staging/media/lirc/lirc_bt829.c
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/media/lirc/lirc_ene0100.h
similarity index 100%
rename from drivers/staging/lirc/lirc_ene0100.h
rename to drivers/staging/media/lirc/lirc_ene0100.h
diff --git a/drivers/staging/lirc/lirc_igorplugusb.c b/drivers/staging/media/lirc/lirc_igorplugusb.c
similarity index 100%
rename from drivers/staging/lirc/lirc_igorplugusb.c
rename to drivers/staging/media/lirc/lirc_igorplugusb.c
diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/media/lirc/lirc_imon.c
similarity index 100%
rename from drivers/staging/lirc/lirc_imon.c
rename to drivers/staging/media/lirc/lirc_imon.c
diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/media/lirc/lirc_parallel.c
similarity index 100%
rename from drivers/staging/lirc/lirc_parallel.c
rename to drivers/staging/media/lirc/lirc_parallel.c
diff --git a/drivers/staging/lirc/lirc_parallel.h b/drivers/staging/media/lirc/lirc_parallel.h
similarity index 100%
rename from drivers/staging/lirc/lirc_parallel.h
rename to drivers/staging/media/lirc/lirc_parallel.h
diff --git a/drivers/staging/lirc/lirc_sasem.c b/drivers/staging/media/lirc/lirc_sasem.c
similarity index 100%
rename from drivers/staging/lirc/lirc_sasem.c
rename to drivers/staging/media/lirc/lirc_sasem.c
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/media/lirc/lirc_serial.c
similarity index 100%
rename from drivers/staging/lirc/lirc_serial.c
rename to drivers/staging/media/lirc/lirc_serial.c
diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/media/lirc/lirc_sir.c
similarity index 100%
rename from drivers/staging/lirc/lirc_sir.c
rename to drivers/staging/media/lirc/lirc_sir.c
diff --git a/drivers/staging/lirc/lirc_ttusbir.c b/drivers/staging/media/lirc/lirc_ttusbir.c
similarity index 100%
rename from drivers/staging/lirc/lirc_ttusbir.c
rename to drivers/staging/media/lirc/lirc_ttusbir.c
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/media/lirc/lirc_zilog.c
similarity index 100%
rename from drivers/staging/lirc/lirc_zilog.c
rename to drivers/staging/media/lirc/lirc_zilog.c
diff --git a/drivers/staging/solo6x10/Kconfig b/drivers/staging/media/solo6x10/Kconfig
similarity index 100%
rename from drivers/staging/solo6x10/Kconfig
rename to drivers/staging/media/solo6x10/Kconfig
diff --git a/drivers/staging/solo6x10/Makefile b/drivers/staging/media/solo6x10/Makefile
similarity index 100%
rename from drivers/staging/solo6x10/Makefile
rename to drivers/staging/media/solo6x10/Makefile
diff --git a/drivers/staging/solo6x10/TODO b/drivers/staging/media/solo6x10/TODO
similarity index 100%
rename from drivers/staging/solo6x10/TODO
rename to drivers/staging/media/solo6x10/TODO
diff --git a/drivers/staging/solo6x10/core.c b/drivers/staging/media/solo6x10/core.c
similarity index 100%
rename from drivers/staging/solo6x10/core.c
rename to drivers/staging/media/solo6x10/core.c
diff --git a/drivers/staging/solo6x10/disp.c b/drivers/staging/media/solo6x10/disp.c
similarity index 100%
rename from drivers/staging/solo6x10/disp.c
rename to drivers/staging/media/solo6x10/disp.c
diff --git a/drivers/staging/solo6x10/enc.c b/drivers/staging/media/solo6x10/enc.c
similarity index 100%
rename from drivers/staging/solo6x10/enc.c
rename to drivers/staging/media/solo6x10/enc.c
diff --git a/drivers/staging/solo6x10/g723.c b/drivers/staging/media/solo6x10/g723.c
similarity index 100%
rename from drivers/staging/solo6x10/g723.c
rename to drivers/staging/media/solo6x10/g723.c
diff --git a/drivers/staging/solo6x10/gpio.c b/drivers/staging/media/solo6x10/gpio.c
similarity index 100%
rename from drivers/staging/solo6x10/gpio.c
rename to drivers/staging/media/solo6x10/gpio.c
diff --git a/drivers/staging/solo6x10/i2c.c b/drivers/staging/media/solo6x10/i2c.c
similarity index 100%
rename from drivers/staging/solo6x10/i2c.c
rename to drivers/staging/media/solo6x10/i2c.c
diff --git a/drivers/staging/solo6x10/jpeg.h b/drivers/staging/media/solo6x10/jpeg.h
similarity index 100%
rename from drivers/staging/solo6x10/jpeg.h
rename to drivers/staging/media/solo6x10/jpeg.h
diff --git a/drivers/staging/solo6x10/offsets.h b/drivers/staging/media/solo6x10/offsets.h
similarity index 100%
rename from drivers/staging/solo6x10/offsets.h
rename to drivers/staging/media/solo6x10/offsets.h
diff --git a/drivers/staging/solo6x10/osd-font.h b/drivers/staging/media/solo6x10/osd-font.h
similarity index 100%
rename from drivers/staging/solo6x10/osd-font.h
rename to drivers/staging/media/solo6x10/osd-font.h
diff --git a/drivers/staging/solo6x10/p2m.c b/drivers/staging/media/solo6x10/p2m.c
similarity index 100%
rename from drivers/staging/solo6x10/p2m.c
rename to drivers/staging/media/solo6x10/p2m.c
diff --git a/drivers/staging/solo6x10/registers.h b/drivers/staging/media/solo6x10/registers.h
similarity index 100%
rename from drivers/staging/solo6x10/registers.h
rename to drivers/staging/media/solo6x10/registers.h
diff --git a/drivers/staging/solo6x10/solo6x10.h b/drivers/staging/media/solo6x10/solo6x10.h
similarity index 100%
rename from drivers/staging/solo6x10/solo6x10.h
rename to drivers/staging/media/solo6x10/solo6x10.h
diff --git a/drivers/staging/solo6x10/tw28.c b/drivers/staging/media/solo6x10/tw28.c
similarity index 100%
rename from drivers/staging/solo6x10/tw28.c
rename to drivers/staging/media/solo6x10/tw28.c
diff --git a/drivers/staging/solo6x10/tw28.h b/drivers/staging/media/solo6x10/tw28.h
similarity index 100%
rename from drivers/staging/solo6x10/tw28.h
rename to drivers/staging/media/solo6x10/tw28.h
diff --git a/drivers/staging/solo6x10/v4l2-enc.c b/drivers/staging/media/solo6x10/v4l2-enc.c
similarity index 100%
rename from drivers/staging/solo6x10/v4l2-enc.c
rename to drivers/staging/media/solo6x10/v4l2-enc.c
diff --git a/drivers/staging/solo6x10/v4l2.c b/drivers/staging/media/solo6x10/v4l2.c
similarity index 100%
rename from drivers/staging/solo6x10/v4l2.c
rename to drivers/staging/media/solo6x10/v4l2.c
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index f3c6060..7a19555 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -1197,7 +1197,7 @@
void pohmelfs_fill_inode(struct inode *inode, struct netfs_inode_info *info)
{
inode->i_mode = info->mode;
- inode->i_nlink = info->nlink;
+ set_nlink(inode, info->nlink);
inode->i_uid = info->uid;
inode->i_gid = info->gid;
inode->i_blocks = info->blocks;
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 8816f53..b3d1741 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -1,6 +1,6 @@
config VT
bool "Virtual terminal" if EXPERT
- depends on !S390
+ depends on !S390 && !UML
select INPUT
default y
---help---
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 29cbfd8..8131e2c 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -19,6 +19,7 @@
# define SUPPORT_SYSRQ
#endif
+#include <linux/atomic.h>
#include <linux/hrtimer.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -33,6 +34,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include "msm_serial.h"
@@ -589,9 +592,8 @@
iowrite32(GSBI_PROTOCOL_IDLE, msm_port->gsbi_base +
GSBI_CONTROL);
- gsbi_resource = platform_get_resource_byname(pdev,
- IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev,
+ IORESOURCE_MEM, 1);
if (unlikely(!gsbi_resource))
return;
@@ -612,8 +614,7 @@
resource_size_t size;
int ret;
- uart_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!uart_resource))
return -ENXIO;
@@ -628,8 +629,7 @@
goto fail_release_port;
}
- gsbi_resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "gsbi_resource");
+ gsbi_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
/* Is this a GSBI-based port? */
if (gsbi_resource) {
size = resource_size(gsbi_resource);
@@ -857,6 +857,8 @@
.cons = MSM_CONSOLE,
};
+static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
+
static int __init msm_serial_probe(struct platform_device *pdev)
{
struct msm_port *msm_port;
@@ -864,6 +866,9 @@
struct uart_port *port;
int irq;
+ if (pdev->id == -1)
+ pdev->id = atomic_inc_return(&msm_uart_next_id) - 1;
+
if (unlikely(pdev->id < 0 || pdev->id >= UART_NR))
return -ENXIO;
@@ -873,7 +878,7 @@
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
- if (platform_get_resource_byname(pdev, IORESOURCE_MEM, "gsbi_resource"))
+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
msm_port->is_uartdm = 1;
else
msm_port->is_uartdm = 0;
@@ -897,8 +902,7 @@
printk(KERN_INFO "uartclk = %d\n", port->uartclk);
- resource = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "uart_resource");
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!resource))
return -ENXIO;
port->mapbase = resource->start;
@@ -922,11 +926,17 @@
return 0;
}
+static struct of_device_id msm_match_table[] = {
+ { .compatible = "qcom,msm-uart" },
+ {}
+};
+
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
.driver = {
.name = "msm_serial",
.owner = THIS_MODULE,
+ .of_match_table = msm_match_table,
},
};
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 4ac2750..791f11b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -62,7 +62,6 @@
boolean
default y if FSL_SOC
default y if PPC_MPC512x
- default y if SOC_AU1200
default y if ARCH_IXP4XX
default y if ARCH_W90X900
default y if ARCH_AT91SAM9G45
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index ed48a5d..7ca290f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,3 +36,4 @@
obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o
obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o
diff --git a/drivers/usb/host/alchemy-common.c b/drivers/usb/host/alchemy-common.c
new file mode 100644
index 0000000..b4192c9
--- /dev/null
+++ b/drivers/usb/host/alchemy-common.c
@@ -0,0 +1,337 @@
+/*
+ * USB block power/access management abstraction.
+ *
+ * Au1000+: The OHCI block control register is at the far end of the OHCI memory
+ * area. Au1550 has OHCI on different base address. No need to handle
+ * UDC here.
+ * Au1200: one register to control access and clocks to O/EHCI, UDC and OTG
+ * as well as the PHY for EHCI and UDC.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/* control register offsets */
+#define AU1000_OHCICFG 0x7fffc
+#define AU1550_OHCICFG 0x07ffc
+#define AU1200_USBCFG 0x04
+
+/* Au1000 USB block config bits */
+#define USBHEN_RD (1 << 4) /* OHCI reset-done indicator */
+#define USBHEN_CE (1 << 3) /* OHCI block clock enable */
+#define USBHEN_E (1 << 2) /* OHCI block enable */
+#define USBHEN_C (1 << 1) /* OHCI block coherency bit */
+#define USBHEN_BE (1 << 0) /* OHCI Big-Endian */
+
+/* Au1200 USB config bits */
+#define USBCFG_PFEN (1 << 31) /* prefetch enable (undoc) */
+#define USBCFG_RDCOMB (1 << 30) /* read combining (undoc) */
+#define USBCFG_UNKNOWN (5 << 20) /* unknown, leave this way */
+#define USBCFG_SSD (1 << 23) /* serial short detect en */
+#define USBCFG_PPE (1 << 19) /* HS PHY PLL */
+#define USBCFG_UCE (1 << 18) /* UDC clock enable */
+#define USBCFG_ECE (1 << 17) /* EHCI clock enable */
+#define USBCFG_OCE (1 << 16) /* OHCI clock enable */
+#define USBCFG_FLA(x) (((x) & 0x3f) << 8)
+#define USBCFG_UCAM (1 << 7) /* coherent access (undoc) */
+#define USBCFG_GME (1 << 6) /* OTG mem access */
+#define USBCFG_DBE (1 << 5) /* UDC busmaster enable */
+#define USBCFG_DME (1 << 4) /* UDC mem enable */
+#define USBCFG_EBE (1 << 3) /* EHCI busmaster enable */
+#define USBCFG_EME (1 << 2) /* EHCI mem enable */
+#define USBCFG_OBE (1 << 1) /* OHCI busmaster enable */
+#define USBCFG_OME (1 << 0) /* OHCI mem enable */
+#define USBCFG_INIT_AU1200 (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
+ USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
+ USBCFG_GME | USBCFG_DBE | USBCFG_DME | \
+ USBCFG_EBE | USBCFG_EME | USBCFG_OBE | \
+ USBCFG_OME)
+
+
+static DEFINE_SPINLOCK(alchemy_usb_lock);
+
+
+static inline void __au1200_ohci_control(void __iomem *base, int enable)
+{
+ unsigned long r = __raw_readl(base + AU1200_USBCFG);
+ if (enable) {
+ __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
+ wmb();
+ udelay(2000);
+ } else {
+ __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+ }
+}
+
+static inline void __au1200_ehci_control(void __iomem *base, int enable)
+{
+ unsigned long r = __raw_readl(base + AU1200_USBCFG);
+ if (enable) {
+ __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+ } else {
+ if (!(r & USBCFG_UCE)) /* UDC also off? */
+ r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
+ __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+ }
+}
+
+static inline void __au1200_udc_control(void __iomem *base, int enable)
+{
+ unsigned long r = __raw_readl(base + AU1200_USBCFG);
+ if (enable) {
+ __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
+ wmb();
+ } else {
+ if (!(r & USBCFG_ECE)) /* EHCI also off? */
+ r &= ~USBCFG_PPE; /* yes: disable HS PHY PLL */
+ __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
+ wmb();
+ }
+}
+
+static inline int au1200_coherency_bug(void)
+{
+#if defined(CONFIG_DMA_COHERENT)
+ /* Au1200 AB USB does not support coherent memory */
+ if (!(read_c0_prid() & 0xff)) {
+ printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
+ printk(KERN_INFO "Au1200 USB: update your board or re-configure"
+ " the kernel\n");
+ return -ENODEV;
+ }
+#endif
+ return 0;
+}
+
+static inline int au1200_usb_control(int block, int enable)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+ int ret = 0;
+
+ switch (block) {
+ case ALCHEMY_USB_OHCI0:
+ ret = au1200_coherency_bug();
+ if (ret && enable)
+ goto out;
+ __au1200_ohci_control(base, enable);
+ break;
+ case ALCHEMY_USB_UDC0:
+ __au1200_udc_control(base, enable);
+ break;
+ case ALCHEMY_USB_EHCI0:
+ ret = au1200_coherency_bug();
+ if (ret && enable)
+ goto out;
+ __au1200_ehci_control(base, enable);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+out:
+ return ret;
+}
+
+
+/* initialize USB block(s) to a known working state */
+static inline void au1200_usb_init(void)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
+ __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
+ wmb();
+ udelay(1000);
+}
+
+static inline void au1000_usb_init(unsigned long rb, int reg)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
+ unsigned long r = __raw_readl(base);
+
+#if defined(__BIG_ENDIAN)
+ r |= USBHEN_BE;
+#endif
+ r |= USBHEN_C;
+
+ __raw_writel(r, base);
+ wmb();
+ udelay(1000);
+}
+
+
+static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
+ unsigned long r = __raw_readl(base + creg);
+
+ if (enable) {
+ __raw_writel(r | USBHEN_CE, base + creg);
+ wmb();
+ udelay(1000);
+ __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
+ wmb();
+ udelay(1000);
+
+ /* wait for reset complete (read reg twice: au1500 erratum) */
+ while (__raw_readl(base + creg),
+ !(__raw_readl(base + creg) & USBHEN_RD))
+ udelay(1000);
+ } else {
+ __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
+ wmb();
+ }
+}
+
+static inline int au1000_usb_control(int block, int enable, unsigned long rb,
+ int creg)
+{
+ int ret = 0;
+
+ switch (block) {
+ case ALCHEMY_USB_OHCI0:
+ __au1xx0_ohci_control(enable, rb, creg);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+ return ret;
+}
+
+/*
+ * alchemy_usb_control - control Alchemy on-chip USB blocks
+ * @block: USB block to target
+ * @enable: set 1 to enable a block, 0 to disable
+ */
+int alchemy_usb_control(int block, int enable)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&alchemy_usb_lock, flags);
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ ret = au1000_usb_control(block, enable,
+ AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ ret = au1000_usb_control(block, enable,
+ AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ ret = au1200_usb_control(block, enable);
+ break;
+ default:
+ ret = -ENODEV;
+ }
+ spin_unlock_irqrestore(&alchemy_usb_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(alchemy_usb_control);
+
+
+static unsigned long alchemy_usb_pmdata[2];
+
+static void au1000_usb_pm(unsigned long br, int creg, int susp)
+{
+ void __iomem *base = (void __iomem *)KSEG1ADDR(br);
+
+ if (susp) {
+ alchemy_usb_pmdata[0] = __raw_readl(base + creg);
+ /* There appears to be some undocumented reset register.... */
+ __raw_writel(0, base + 0x04);
+ wmb();
+ __raw_writel(0, base + creg);
+ wmb();
+ } else {
+ __raw_writel(alchemy_usb_pmdata[0], base + creg);
+ wmb();
+ }
+}
+
+static void au1200_usb_pm(int susp)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
+ if (susp) {
+ /* save OTG_CAP/MUX registers which indicate port routing */
+ /* FIXME: write an OTG driver to do that */
+ alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
+ alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
+ } else {
+ /* restore access to all MMIO areas */
+ au1200_usb_init();
+
+ /* restore OTG_CAP/MUX registers */
+ __raw_writel(alchemy_usb_pmdata[0], base + 0x00);
+ __raw_writel(alchemy_usb_pmdata[1], base + 0x04);
+ wmb();
+ }
+}
+
+static void alchemy_usb_pm(int susp)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ au1200_usb_pm(susp);
+ break;
+ }
+}
+
+static int alchemy_usb_suspend(void)
+{
+ alchemy_usb_pm(1);
+ return 0;
+}
+
+static void alchemy_usb_resume(void)
+{
+ alchemy_usb_pm(0);
+}
+
+static struct syscore_ops alchemy_usb_pm_ops = {
+ .suspend = alchemy_usb_suspend,
+ .resume = alchemy_usb_resume,
+};
+
+static int __init alchemy_usb_init(void)
+{
+ switch (alchemy_get_cputype()) {
+ case ALCHEMY_CPU_AU1000:
+ case ALCHEMY_CPU_AU1500:
+ case ALCHEMY_CPU_AU1100:
+ au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1550:
+ au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
+ break;
+ case ALCHEMY_CPU_AU1200:
+ au1200_usb_init();
+ break;
+ }
+
+ register_syscore_ops(&alchemy_usb_pm_ops);
+
+ return 0;
+}
+arch_initcall(alchemy_usb_init);
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 65719e8..18bafa9 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -14,61 +14,9 @@
#include <linux/platform_device.h>
#include <asm/mach-au1x00/au1000.h>
-#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN (1<<31)
-#define USB_MCFG_RDCOMB (1<<30)
-#define USB_MCFG_SSDEN (1<<23)
-#define USB_MCFG_PHYPLLEN (1<<19)
-#define USB_MCFG_UCECLKEN (1<<18)
-#define USB_MCFG_EHCCLKEN (1<<17)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM (1<<7)
-#else
-#define USB_MCFG_UCAM (0)
-#endif
-#define USB_MCFG_EBMEN (1<<3)
-#define USB_MCFG_EMEMEN (1<<2)
-
-#define USBH_ENABLE_CE (USB_MCFG_PHYPLLEN | USB_MCFG_EHCCLKEN)
-#define USBH_ENABLE_INIT (USB_MCFG_PFEN | USB_MCFG_RDCOMB | \
- USBH_ENABLE_CE | USB_MCFG_SSDEN | \
- USB_MCFG_UCAM | USB_MCFG_EBMEN | \
- USB_MCFG_EMEMEN)
-
-#define USBH_DISABLE (USB_MCFG_EBMEN | USB_MCFG_EMEMEN)
extern int usb_disabled(void);
-static void au1xxx_start_ehc(void)
-{
- /* enable clock to EHCI block and HS PHY PLL*/
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- /* enable EHCI mmio */
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-}
-
-static void au1xxx_stop_ehc(void)
-{
- unsigned long c;
-
- /* Disable mem */
- au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- /* Disable EHC clock. If the HS PHY is unused disable it too. */
- c = au_readl(USB_HOST_CONFIG) & ~USB_MCFG_EHCCLKEN;
- if (!(c & USB_MCFG_UCECLKEN)) /* UDC disabled? */
- c &= ~USB_MCFG_PHYPLLEN; /* yes: disable HS PHY PLL */
- au_writel(c, USB_HOST_CONFIG);
- au_sync();
-}
-
static int au1xxx_ehci_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -136,16 +84,6 @@
if (usb_disabled())
return -ENODEV;
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
- /* Au1200 AB USB does not support coherent memory */
- if (!(read_c0_prid() & 0xff)) {
- printk(KERN_INFO "%s: this is chip revision AB!\n", pdev->name);
- printk(KERN_INFO "%s: update your board or re-configure"
- " the kernel\n", pdev->name);
- return -ENODEV;
- }
-#endif
-
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
@@ -171,7 +109,11 @@
goto err2;
}
- au1xxx_start_ehc();
+ if (alchemy_usb_control(ALCHEMY_USB_EHCI0, 1)) {
+ printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+ ret = -ENODEV;
+ goto err3;
+ }
ehci = hcd_to_ehci(hcd);
ehci->caps = hcd->regs;
@@ -187,7 +129,8 @@
return ret;
}
- au1xxx_stop_ehc();
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+err3:
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -201,10 +144,10 @@
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- au1xxx_stop_ehc();
platform_set_drvdata(pdev, NULL);
return 0;
@@ -236,7 +179,7 @@
// could save FLADJ in case of Vaux power loss
// ... we'd only use it to handle clock skew
- au1xxx_stop_ehc();
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
return rc;
}
@@ -246,7 +189,7 @@
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- au1xxx_start_ehc();
+ alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
// maybe restore FLADJ
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 59e8161..3ff9f82 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1224,7 +1224,7 @@
#define PLATFORM_DRIVER ehci_hcd_sh_driver
#endif
-#ifdef CONFIG_SOC_AU1200
+#ifdef CONFIG_MIPS_ALCHEMY
#include "ehci-au1xxx.c"
#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
#endif
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 944291e..ba3a46b 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -35,8 +35,7 @@
static void at91_start_clock(void)
{
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_enable(hclk);
+ clk_enable(hclk);
clk_enable(iclk);
clk_enable(fclk);
clocked = 1;
@@ -46,8 +45,7 @@
{
clk_disable(fclk);
clk_disable(iclk);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_disable(hclk);
+ clk_disable(hclk);
clocked = 0;
}
@@ -142,8 +140,7 @@
iclk = clk_get(&pdev->dev, "ohci_clk");
fclk = clk_get(&pdev->dev, "uhpck");
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- hclk = clk_get(&pdev->dev, "hck0");
+ hclk = clk_get(&pdev->dev, "hclk");
at91_start_hc(pdev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -155,8 +152,7 @@
/* Error handling */
at91_stop_hc(pdev);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_put(hclk);
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
@@ -192,8 +188,7 @@
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_put(hclk);
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
fclk = iclk = hclk = NULL;
@@ -223,6 +218,156 @@
return 0;
}
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+ if (port < 0 || port >= 2)
+ return;
+
+ gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+ if (port < 0 || port >= 2)
+ return -EINVAL;
+
+ return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ int length = ohci_hub_status_data(hcd, buf);
+ int port;
+
+ for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ if (pdata->overcurrent_changed[port]) {
+ if (! length)
+ length = 1;
+ buf[0] |= 1 << (port + 1);
+ }
+ }
+
+ return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ struct usb_hub_descriptor *desc;
+ int ret = -EINVAL;
+ u32 *data = (u32 *)buf;
+
+ dev_dbg(hcd->self.controller,
+ "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+ hcd, typeReq, wValue, wIndex, buf, wLength);
+
+ switch (typeReq) {
+ case SetPortFeature:
+ if (wValue == USB_PORT_FEAT_POWER) {
+ dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+ ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+ goto out;
+ }
+ break;
+
+ case ClearPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: C_OVER_CURRENT\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ pdata->overcurrent_changed[wIndex-1] = 0;
+ pdata->overcurrent_status[wIndex-1] = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: OVER_CURRENT\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ pdata->overcurrent_status[wIndex-1] = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: POWER\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+ return 0;
+ }
+ }
+ break;
+ }
+
+ ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+ if (ret)
+ goto out;
+
+ switch (typeReq) {
+ case GetHubDescriptor:
+
+ /* update the hub's descriptor */
+
+ desc = (struct usb_hub_descriptor *)buf;
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ /* remove the old configurations for power-switching, and
+ * over-current protection, and insert our new configuration
+ */
+
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+ desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+ if (pdata->overcurrent_supported) {
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+ desc->wHubCharacteristics |= cpu_to_le16(0x0008|0x0001);
+ }
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ return ret;
+
+ case GetPortStatus:
+ /* check port status */
+
+ dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+ if (wIndex == 1 || wIndex == 2) {
+ if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+ *data &= ~cpu_to_le32(RH_PS_PPS);
+ }
+
+ if (pdata->overcurrent_changed[wIndex-1]) {
+ *data |= cpu_to_le32(RH_PS_OCIC);
+ }
+
+ if (pdata->overcurrent_status[wIndex-1]) {
+ *data |= cpu_to_le32(RH_PS_POCI);
+ }
+ }
+ }
+
+ out:
+ return ret;
+}
+
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_at91_hc_driver = {
@@ -258,8 +403,8 @@
/*
* root hub support
*/
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
+ .hub_status_data = ohci_at91_hub_status_data,
+ .hub_control = ohci_at91_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -269,22 +414,71 @@
/*-------------------------------------------------------------------------*/
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct at91_usbh_data *pdata = pdev->dev.platform_data;
+ int val, gpio, port;
+
+ /* From the GPIO notifying the over-current situation, find
+ * out the corresponding port */
+ gpio = irq_to_gpio(irq);
+ for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ if (pdata->overcurrent_pin[port] == gpio)
+ break;
+ }
+
+ if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+ dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+ return IRQ_HANDLED;
+ }
+
+ val = gpio_get_value(gpio);
+
+ /* When notified of an over-current situation, disable power
+ on the corresponding port, and mark this port in
+ over-current. */
+ if (! val) {
+ ohci_at91_usb_set_power(pdata, port, 0);
+ pdata->overcurrent_status[port] = 1;
+ pdata->overcurrent_changed[port] = 1;
+ }
+
+ dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+ val ? "exited" : "notified");
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
if (pdata) {
- /* REVISIT make the driver support per-port power switching,
- * and also overcurrent detection. Here we assume the ports
- * are always powered while this driver is active, and use
- * active-low power switches.
- */
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
- gpio_direction_output(pdata->vbus_pin[i], 0);
+ ohci_at91_usb_set_power(pdata, i, 1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+ int ret;
+
+ if (pdata->overcurrent_pin[i] <= 0)
+ continue;
+ gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+
+ ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED, "ohci_overcurrent", pdev);
+ if (ret) {
+ gpio_free(pdata->overcurrent_pin[i]);
+ dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+ }
}
}
@@ -301,9 +495,16 @@
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
- gpio_direction_output(pdata->vbus_pin[i], 1);
+ ohci_at91_usb_set_power(pdata, i, 0);
gpio_free(pdata->vbus_pin[i]);
}
+
+ for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+ if (pdata->overcurrent_pin[i] <= 0)
+ continue;
+ free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
+ gpio_free(pdata->overcurrent_pin[i]);
+ }
}
device_init_wakeup(&pdev->dev, 0);
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 6b7bc50..9b66df8 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -23,92 +23,9 @@
#include <asm/mach-au1x00/au1000.h>
-#ifndef CONFIG_SOC_AU1200
-
-#define USBH_ENABLE_BE (1<<0)
-#define USBH_ENABLE_C (1<<1)
-#define USBH_ENABLE_E (1<<2)
-#define USBH_ENABLE_CE (1<<3)
-#define USBH_ENABLE_RD (1<<4)
-
-#ifdef __LITTLE_ENDIAN
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif defined(__BIG_ENDIAN)
-#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
- USBH_ENABLE_BE)
-#else
-#error not byte order defined
-#endif
-
-#else /* Au1200 */
-
-#define USB_HOST_CONFIG (USB_MSR_BASE + USB_MSR_MCFG)
-#define USB_MCFG_PFEN (1<<31)
-#define USB_MCFG_RDCOMB (1<<30)
-#define USB_MCFG_SSDEN (1<<23)
-#define USB_MCFG_OHCCLKEN (1<<16)
-#ifdef CONFIG_DMA_COHERENT
-#define USB_MCFG_UCAM (1<<7)
-#else
-#define USB_MCFG_UCAM (0)
-#endif
-#define USB_MCFG_OBMEN (1<<1)
-#define USB_MCFG_OMEMEN (1<<0)
-
-#define USBH_ENABLE_CE USB_MCFG_OHCCLKEN
-
-#define USBH_ENABLE_INIT (USB_MCFG_PFEN | USB_MCFG_RDCOMB | \
- USBH_ENABLE_CE | USB_MCFG_SSDEN | \
- USB_MCFG_UCAM | \
- USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#define USBH_DISABLE (USB_MCFG_OBMEN | USB_MCFG_OMEMEN)
-
-#endif /* Au1200 */
extern int usb_disabled(void);
-static void au1xxx_start_ohc(void)
-{
- /* enable host controller */
-#ifndef CONFIG_SOC_AU1200
- au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- /* wait for reset complete (read register twice; see au1500 errata) */
- while (au_readl(USB_HOST_CONFIG),
- !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
- udelay(1000);
-
-#else /* Au1200 */
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-
- au_writel(au_readl(USB_HOST_CONFIG) | USBH_ENABLE_INIT, USB_HOST_CONFIG);
- au_sync();
- udelay(2000);
-#endif /* Au1200 */
-}
-
-static void au1xxx_stop_ohc(void)
-{
-#ifdef CONFIG_SOC_AU1200
- /* Disable mem */
- au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_DISABLE, USB_HOST_CONFIG);
- au_sync();
- udelay(1000);
-#endif
- /* Disable clock */
- au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
- au_sync();
-}
-
static int __devinit ohci_au1xxx_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
@@ -178,17 +95,6 @@
if (usb_disabled())
return -ENODEV;
-#if defined(CONFIG_SOC_AU1200) && defined(CONFIG_DMA_COHERENT)
- /* Au1200 AB USB does not support coherent memory */
- if (!(read_c0_prid() & 0xff)) {
- printk(KERN_INFO "%s: this is chip revision AB !!\n",
- pdev->name);
- printk(KERN_INFO "%s: update your board or re-configure "
- "the kernel\n", pdev->name);
- return -ENODEV;
- }
-#endif
-
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ\n");
return -ENOMEM;
@@ -214,7 +120,12 @@
goto err2;
}
- au1xxx_start_ohc();
+ if (alchemy_usb_control(ALCHEMY_USB_OHCI0, 1)) {
+ printk(KERN_INFO "%s: controller init failed!\n", pdev->name);
+ ret = -ENODEV;
+ goto err3;
+ }
+
ohci_hcd_init(hcd_to_ohci(hcd));
ret = usb_add_hcd(hcd, pdev->resource[1].start,
@@ -224,7 +135,8 @@
return ret;
}
- au1xxx_stop_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
+err3:
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
@@ -238,7 +150,7 @@
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_remove_hcd(hcd);
- au1xxx_stop_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
@@ -275,7 +187,7 @@
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- au1xxx_stop_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 0);
bail:
spin_unlock_irqrestore(&ohci->lock, flags);
@@ -286,7 +198,7 @@
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
- au1xxx_start_ohc();
+ alchemy_usb_control(ALCHEMY_USB_OHCI0, 1);
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
ohci_finish_controller_resume(hcd);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8165c55..d83e967 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1753,7 +1753,7 @@
config FB_AU1100
bool "Au1100 LCD Driver"
- depends on (FB = y) && MIPS && SOC_AU1100
+ depends on (FB = y) && MIPS_ALCHEMY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1764,7 +1764,7 @@
config FB_AU1200
bool "Au1200 LCD Driver"
- depends on (FB = y) && MIPS && SOC_AU1200
+ depends on (FB = y) && MIPS_ALCHEMY
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c
index afea9ab..6ce3416 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/mbx/mbxfb.c
@@ -34,7 +34,7 @@
#include "regs.h"
#include "reg_bits.h"
-static unsigned long virt_base_2700;
+static void __iomem *virt_base_2700;
#define write_reg(val, reg) do { writel((val), (reg)); } while(0)
@@ -850,7 +850,7 @@
{
/* make frame buffer memory enter self-refresh mode */
write_reg_dly(LMPWR_MC_PWR_SRM, LMPWR);
- while (LMPWRSTAT != LMPWRSTAT_MC_PWR_SRM)
+ while (readl(LMPWRSTAT) != LMPWRSTAT_MC_PWR_SRM)
; /* empty statement */
/* reset the device, since it's initial state is 'mostly sleeping' */
@@ -946,7 +946,7 @@
ret = -EINVAL;
goto err3;
}
- virt_base_2700 = (unsigned long)mfbi->reg_virt_addr;
+ virt_base_2700 = mfbi->reg_virt_addr;
mfbi->fb_virt_addr = ioremap_nocache(mfbi->fb_phys_addr,
res_size(mfbi->fb_req));
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index e89778f..1d1e4f1 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1309,16 +1309,6 @@
return 0;
}
#else
-int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int n_cmds)
-{
- return 0;
-}
-
-int pxafb_smart_flush(struct fb_info *info)
-{
- return 0;
-}
-
static inline int pxafb_smart_init(struct pxafb_info *fbi) { return 0; }
#endif /* CONFIG_FB_PXA_SMARTPANEL */
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 57e493b..816ed08 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
@@ -35,4 +35,15 @@
If unsure, say M.
+ config VIRTIO_MMIO
+ tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select VIRTIO
+ select VIRTIO_RING
+ ---help---
+ This drivers provides support for memory mapped virtio
+ platform device driver.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index 6738c44..5a4c63c 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_VIRTIO) += virtio.o
obj-$(CONFIG_VIRTIO_RING) += virtio_ring.o
+obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
new file mode 100644
index 0000000..acc5e43
--- /dev/null
+++ b/drivers/virtio/virtio_mmio.c
@@ -0,0 +1,479 @@
+/*
+ * Virtio memory mapped device driver
+ *
+ * Copyright 2011, ARM Ltd.
+ *
+ * This module allows virtio devices to be used over a virtual, memory mapped
+ * platform device.
+ *
+ * Registers layout (all 32-bit wide):
+ *
+ * offset d. name description
+ * ------ -- ---------------- -----------------
+ *
+ * 0x000 R MagicValue Magic value "virt"
+ * 0x004 R Version Device version (current max. 1)
+ * 0x008 R DeviceID Virtio device ID
+ * 0x00c R VendorID Virtio vendor ID
+ *
+ * 0x010 R HostFeatures Features supported by the host
+ * 0x014 W HostFeaturesSel Set of host features to access via HostFeatures
+ *
+ * 0x020 W GuestFeatures Features activated by the guest
+ * 0x024 W GuestFeaturesSel Set of activated features to set via GuestFeatures
+ * 0x028 W GuestPageSize Size of guest's memory page in bytes
+ *
+ * 0x030 W QueueSel Queue selector
+ * 0x034 R QueueNumMax Maximum size of the currently selected queue
+ * 0x038 W QueueNum Queue size for the currently selected queue
+ * 0x03c W QueueAlign Used Ring alignment for the current queue
+ * 0x040 RW QueuePFN PFN for the currently selected queue
+ *
+ * 0x050 W QueueNotify Queue notifier
+ * 0x060 R InterruptStatus Interrupt status register
+ * 0x060 W InterruptACK Interrupt acknowledge register
+ * 0x070 RW Status Device status register
+ *
+ * 0x100+ RW Device-specific configuration space
+ *
+ * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include <linux/highmem.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_mmio.h>
+#include <linux/virtio_ring.h>
+
+
+
+/* The alignment to use between consumer and producer parts of vring.
+ * Currently hardcoded to the page size. */
+#define VIRTIO_MMIO_VRING_ALIGN PAGE_SIZE
+
+
+
+#define to_virtio_mmio_device(_plat_dev) \
+ container_of(_plat_dev, struct virtio_mmio_device, vdev)
+
+struct virtio_mmio_device {
+ struct virtio_device vdev;
+ struct platform_device *pdev;
+
+ void __iomem *base;
+ unsigned long version;
+
+ /* a list of queues so we can dispatch IRQs */
+ spinlock_t lock;
+ struct list_head virtqueues;
+};
+
+struct virtio_mmio_vq_info {
+ /* the actual virtqueue */
+ struct virtqueue *vq;
+
+ /* the number of entries in the queue */
+ unsigned int num;
+
+ /* the index of the queue */
+ int queue_index;
+
+ /* the virtual address of the ring queue */
+ void *queue;
+
+ /* the list node for the virtqueues list */
+ struct list_head node;
+};
+
+
+
+/* Configuration interface */
+
+static u32 vm_get_features(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ /* TODO: Features > 32 bits */
+ writel(0, vm_dev->base + VIRTIO_MMIO_HOST_FEATURES_SEL);
+
+ return readl(vm_dev->base + VIRTIO_MMIO_HOST_FEATURES);
+}
+
+static void vm_finalize_features(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ int i;
+
+ /* Give virtio_ring a chance to accept features. */
+ vring_transport_features(vdev);
+
+ for (i = 0; i < ARRAY_SIZE(vdev->features); i++) {
+ writel(i, vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES_SET);
+ writel(vdev->features[i],
+ vm_dev->base + VIRTIO_MMIO_GUEST_FEATURES);
+ }
+}
+
+static void vm_get(struct virtio_device *vdev, unsigned offset,
+ void *buf, unsigned len)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ u8 *ptr = buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ ptr[i] = readb(vm_dev->base + VIRTIO_MMIO_CONFIG + offset + i);
+}
+
+static void vm_set(struct virtio_device *vdev, unsigned offset,
+ const void *buf, unsigned len)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ const u8 *ptr = buf;
+ int i;
+
+ for (i = 0; i < len; i++)
+ writeb(ptr[i], vm_dev->base + VIRTIO_MMIO_CONFIG + offset + i);
+}
+
+static u8 vm_get_status(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ return readl(vm_dev->base + VIRTIO_MMIO_STATUS) & 0xff;
+}
+
+static void vm_set_status(struct virtio_device *vdev, u8 status)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ /* We should never be setting status to 0. */
+ BUG_ON(status == 0);
+
+ writel(status, vm_dev->base + VIRTIO_MMIO_STATUS);
+}
+
+static void vm_reset(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+
+ /* 0 status means a reset. */
+ writel(0, vm_dev->base + VIRTIO_MMIO_STATUS);
+}
+
+
+
+/* Transport interface */
+
+/* the notify function used when creating a virt queue */
+static void vm_notify(struct virtqueue *vq)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev);
+ struct virtio_mmio_vq_info *info = vq->priv;
+
+ /* We write the queue's selector into the notification register to
+ * signal the other end */
+ writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY);
+}
+
+/* Notify all virtqueues on an interrupt. */
+static irqreturn_t vm_interrupt(int irq, void *opaque)
+{
+ struct virtio_mmio_device *vm_dev = opaque;
+ struct virtio_mmio_vq_info *info;
+ struct virtio_driver *vdrv = container_of(vm_dev->vdev.dev.driver,
+ struct virtio_driver, driver);
+ unsigned long status;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+
+ /* Read and acknowledge interrupts */
+ status = readl(vm_dev->base + VIRTIO_MMIO_INTERRUPT_STATUS);
+ writel(status, vm_dev->base + VIRTIO_MMIO_INTERRUPT_ACK);
+
+ if (unlikely(status & VIRTIO_MMIO_INT_CONFIG)
+ && vdrv && vdrv->config_changed) {
+ vdrv->config_changed(&vm_dev->vdev);
+ ret = IRQ_HANDLED;
+ }
+
+ if (likely(status & VIRTIO_MMIO_INT_VRING)) {
+ spin_lock_irqsave(&vm_dev->lock, flags);
+ list_for_each_entry(info, &vm_dev->virtqueues, node)
+ ret |= vring_interrupt(irq, info->vq);
+ spin_unlock_irqrestore(&vm_dev->lock, flags);
+ }
+
+ return ret;
+}
+
+
+
+static void vm_del_vq(struct virtqueue *vq)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev);
+ struct virtio_mmio_vq_info *info = vq->priv;
+ unsigned long flags, size;
+
+ spin_lock_irqsave(&vm_dev->lock, flags);
+ list_del(&info->node);
+ spin_unlock_irqrestore(&vm_dev->lock, flags);
+
+ vring_del_virtqueue(vq);
+
+ /* Select and deactivate the queue */
+ writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
+ writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
+
+ size = PAGE_ALIGN(vring_size(info->num, VIRTIO_MMIO_VRING_ALIGN));
+ free_pages_exact(info->queue, size);
+ kfree(info);
+}
+
+static void vm_del_vqs(struct virtio_device *vdev)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ struct virtqueue *vq, *n;
+
+ list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+ vm_del_vq(vq);
+
+ free_irq(platform_get_irq(vm_dev->pdev, 0), vm_dev);
+}
+
+
+
+static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index,
+ void (*callback)(struct virtqueue *vq),
+ const char *name)
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ struct virtio_mmio_vq_info *info;
+ struct virtqueue *vq;
+ unsigned long flags, size;
+ int err;
+
+ /* Select the queue we're interested in */
+ writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL);
+
+ /* Queue shouldn't already be set up. */
+ if (readl(vm_dev->base + VIRTIO_MMIO_QUEUE_PFN)) {
+ err = -ENOENT;
+ goto error_available;
+ }
+
+ /* Allocate and fill out our active queue description */
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ err = -ENOMEM;
+ goto error_kmalloc;
+ }
+ info->queue_index = index;
+
+ /* Allocate pages for the queue - start with a queue as big as
+ * possible (limited by maximum size allowed by device), drop down
+ * to a minimal size, just big enough to fit descriptor table
+ * and two rings (which makes it "alignment_size * 2")
+ */
+ info->num = readl(vm_dev->base + VIRTIO_MMIO_QUEUE_NUM_MAX);
+ while (1) {
+ size = PAGE_ALIGN(vring_size(info->num,
+ VIRTIO_MMIO_VRING_ALIGN));
+ /* Already smallest possible allocation? */
+ if (size <= VIRTIO_MMIO_VRING_ALIGN * 2) {
+ err = -ENOMEM;
+ goto error_alloc_pages;
+ }
+
+ info->queue = alloc_pages_exact(size, GFP_KERNEL | __GFP_ZERO);
+ if (info->queue)
+ break;
+
+ info->num /= 2;
+ }
+
+ /* Activate the queue */
+ writel(info->num, vm_dev->base + VIRTIO_MMIO_QUEUE_NUM);
+ writel(VIRTIO_MMIO_VRING_ALIGN,
+ vm_dev->base + VIRTIO_MMIO_QUEUE_ALIGN);
+ writel(virt_to_phys(info->queue) >> PAGE_SHIFT,
+ vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
+
+ /* Create the vring */
+ vq = vring_new_virtqueue(info->num, VIRTIO_MMIO_VRING_ALIGN,
+ vdev, info->queue, vm_notify, callback, name);
+ if (!vq) {
+ err = -ENOMEM;
+ goto error_new_virtqueue;
+ }
+
+ vq->priv = info;
+ info->vq = vq;
+
+ spin_lock_irqsave(&vm_dev->lock, flags);
+ list_add(&info->node, &vm_dev->virtqueues);
+ spin_unlock_irqrestore(&vm_dev->lock, flags);
+
+ return vq;
+
+error_new_virtqueue:
+ writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN);
+ free_pages_exact(info->queue, size);
+error_alloc_pages:
+ kfree(info);
+error_kmalloc:
+error_available:
+ return ERR_PTR(err);
+}
+
+static int vm_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+ struct virtqueue *vqs[],
+ vq_callback_t *callbacks[],
+ const char *names[])
+{
+ struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vdev);
+ unsigned int irq = platform_get_irq(vm_dev->pdev, 0);
+ int i, err;
+
+ err = request_irq(irq, vm_interrupt, IRQF_SHARED,
+ dev_name(&vdev->dev), vm_dev);
+ if (err)
+ return err;
+
+ for (i = 0; i < nvqs; ++i) {
+ vqs[i] = vm_setup_vq(vdev, i, callbacks[i], names[i]);
+ if (IS_ERR(vqs[i])) {
+ vm_del_vqs(vdev);
+ return PTR_ERR(vqs[i]);
+ }
+ }
+
+ return 0;
+}
+
+
+
+static struct virtio_config_ops virtio_mmio_config_ops = {
+ .get = vm_get,
+ .set = vm_set,
+ .get_status = vm_get_status,
+ .set_status = vm_set_status,
+ .reset = vm_reset,
+ .find_vqs = vm_find_vqs,
+ .del_vqs = vm_del_vqs,
+ .get_features = vm_get_features,
+ .finalize_features = vm_finalize_features,
+};
+
+
+
+/* Platform device */
+
+static int __devinit virtio_mmio_probe(struct platform_device *pdev)
+{
+ struct virtio_mmio_device *vm_dev;
+ struct resource *mem;
+ unsigned long magic;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -EINVAL;
+
+ if (!devm_request_mem_region(&pdev->dev, mem->start,
+ resource_size(mem), pdev->name))
+ return -EBUSY;
+
+ vm_dev = devm_kzalloc(&pdev->dev, sizeof(*vm_dev), GFP_KERNEL);
+ if (!vm_dev)
+ return -ENOMEM;
+
+ vm_dev->vdev.dev.parent = &pdev->dev;
+ vm_dev->vdev.config = &virtio_mmio_config_ops;
+ vm_dev->pdev = pdev;
+ INIT_LIST_HEAD(&vm_dev->virtqueues);
+ spin_lock_init(&vm_dev->lock);
+
+ vm_dev->base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
+ if (vm_dev->base == NULL)
+ return -EFAULT;
+
+ /* Check magic value */
+ magic = readl(vm_dev->base + VIRTIO_MMIO_MAGIC_VALUE);
+ if (memcmp(&magic, "virt", 4) != 0) {
+ dev_warn(&pdev->dev, "Wrong magic value 0x%08lx!\n", magic);
+ return -ENODEV;
+ }
+
+ /* Check device version */
+ vm_dev->version = readl(vm_dev->base + VIRTIO_MMIO_VERSION);
+ if (vm_dev->version != 1) {
+ dev_err(&pdev->dev, "Version %ld not supported!\n",
+ vm_dev->version);
+ return -ENXIO;
+ }
+
+ vm_dev->vdev.id.device = readl(vm_dev->base + VIRTIO_MMIO_DEVICE_ID);
+ vm_dev->vdev.id.vendor = readl(vm_dev->base + VIRTIO_MMIO_VENDOR_ID);
+
+ writel(PAGE_SIZE, vm_dev->base + VIRTIO_MMIO_GUEST_PAGE_SIZE);
+
+ platform_set_drvdata(pdev, vm_dev);
+
+ return register_virtio_device(&vm_dev->vdev);
+}
+
+static int __devexit virtio_mmio_remove(struct platform_device *pdev)
+{
+ struct virtio_mmio_device *vm_dev = platform_get_drvdata(pdev);
+
+ unregister_virtio_device(&vm_dev->vdev);
+
+ return 0;
+}
+
+
+
+/* Platform driver */
+
+static struct of_device_id virtio_mmio_match[] = {
+ { .compatible = "virtio,mmio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, virtio_mmio_match);
+
+static struct platform_driver virtio_mmio_driver = {
+ .probe = virtio_mmio_probe,
+ .remove = __devexit_p(virtio_mmio_remove),
+ .driver = {
+ .name = "virtio-mmio",
+ .owner = THIS_MODULE,
+ .of_match_table = virtio_mmio_match,
+ },
+};
+
+static int __init virtio_mmio_init(void)
+{
+ return platform_driver_register(&virtio_mmio_driver);
+}
+
+static void __exit virtio_mmio_exit(void)
+{
+ platform_driver_unregister(&virtio_mmio_driver);
+}
+
+module_init(virtio_mmio_init);
+module_exit(virtio_mmio_exit);
+
+MODULE_AUTHOR("Pawel Moll <pawel.moll@arm.com>");
+MODULE_DESCRIPTION("Platform bus driver for memory mapped virtio devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 4bcc8b8..79a31e5 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -415,9 +415,13 @@
}
}
- spin_lock_irqsave(&vp_dev->lock, flags);
- list_add(&info->node, &vp_dev->virtqueues);
- spin_unlock_irqrestore(&vp_dev->lock, flags);
+ if (callback) {
+ spin_lock_irqsave(&vp_dev->lock, flags);
+ list_add(&info->node, &vp_dev->virtqueues);
+ spin_unlock_irqrestore(&vp_dev->lock, flags);
+ } else {
+ INIT_LIST_HEAD(&info->node);
+ }
return vq;
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
index 483d451..5754c9a 100644
--- a/drivers/w1/slaves/w1_ds2760.c
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -114,43 +114,7 @@
.read = w1_ds2760_read_bin,
};
-static DEFINE_IDR(bat_idr);
-static DEFINE_MUTEX(bat_idr_lock);
-
-static int new_bat_id(void)
-{
- int ret;
-
- while (1) {
- int id;
-
- ret = idr_pre_get(&bat_idr, GFP_KERNEL);
- if (ret == 0)
- return -ENOMEM;
-
- mutex_lock(&bat_idr_lock);
- ret = idr_get_new(&bat_idr, NULL, &id);
- mutex_unlock(&bat_idr_lock);
-
- if (ret == 0) {
- ret = id & MAX_ID_MASK;
- break;
- } else if (ret == -EAGAIN) {
- continue;
- } else {
- break;
- }
- }
-
- return ret;
-}
-
-static void release_bat_id(int id)
-{
- mutex_lock(&bat_idr_lock);
- idr_remove(&bat_idr, id);
- mutex_unlock(&bat_idr_lock);
-}
+static DEFINE_IDA(bat_ida);
static int w1_ds2760_add_slave(struct w1_slave *sl)
{
@@ -158,7 +122,7 @@
int id;
struct platform_device *pdev;
- id = new_bat_id();
+ id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
ret = id;
goto noid;
@@ -187,7 +151,7 @@
pdev_add_failed:
platform_device_unregister(pdev);
pdev_alloc_failed:
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
noid:
success:
return ret;
@@ -199,7 +163,7 @@
int id = pdev->id;
platform_device_unregister(pdev);
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
}
@@ -217,14 +181,14 @@
{
printk(KERN_INFO "1-Wire driver for the DS2760 battery monitor "
" chip - (c) 2004-2005, Szabolcs Gyurko\n");
- idr_init(&bat_idr);
+ ida_init(&bat_ida);
return w1_register_family(&w1_ds2760_family);
}
static void __exit w1_ds2760_exit(void)
{
w1_unregister_family(&w1_ds2760_family);
- idr_destroy(&bat_idr);
+ ida_destroy(&bat_ida);
}
EXPORT_SYMBOL(w1_ds2760_read);
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
index 274c8f3..39f78c0 100644
--- a/drivers/w1/slaves/w1_ds2780.c
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -26,20 +26,14 @@
#include "../w1_family.h"
#include "w1_ds2780.h"
-int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
- int io)
+static int w1_ds2780_do_io(struct device *dev, char *buf, int addr,
+ size_t count, int io)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
- if (!dev)
- return -ENODEV;
+ if (addr > DS2780_DATA_SIZE || addr < 0)
+ return 0;
- mutex_lock(&sl->master->mutex);
-
- if (addr > DS2780_DATA_SIZE || addr < 0) {
- count = 0;
- goto out;
- }
count = min_t(int, count, DS2780_DATA_SIZE - addr);
if (w1_reset_select_slave(sl) == 0) {
@@ -47,7 +41,6 @@
w1_write_8(sl->master, W1_DS2780_WRITE_DATA);
w1_write_8(sl->master, addr);
w1_write_block(sl->master, buf, count);
- /* XXX w1_write_block returns void, not n_written */
} else {
w1_write_8(sl->master, W1_DS2780_READ_DATA);
w1_write_8(sl->master, addr);
@@ -55,13 +48,42 @@
}
}
-out:
- mutex_unlock(&sl->master->mutex);
-
return count;
}
+
+int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ mutex_lock(&sl->master->mutex);
+
+ ret = w1_ds2780_do_io(dev, buf, addr, count, io);
+
+ mutex_unlock(&sl->master->mutex);
+
+ return ret;
+}
EXPORT_SYMBOL(w1_ds2780_io);
+int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ ret = w1_ds2780_do_io(dev, buf, addr, count, io);
+
+ return ret;
+}
+EXPORT_SYMBOL(w1_ds2780_io_nolock);
+
int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
{
struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
@@ -99,43 +121,7 @@
.read = w1_ds2780_read_bin,
};
-static DEFINE_IDR(bat_idr);
-static DEFINE_MUTEX(bat_idr_lock);
-
-static int new_bat_id(void)
-{
- int ret;
-
- while (1) {
- int id;
-
- ret = idr_pre_get(&bat_idr, GFP_KERNEL);
- if (ret == 0)
- return -ENOMEM;
-
- mutex_lock(&bat_idr_lock);
- ret = idr_get_new(&bat_idr, NULL, &id);
- mutex_unlock(&bat_idr_lock);
-
- if (ret == 0) {
- ret = id & MAX_ID_MASK;
- break;
- } else if (ret == -EAGAIN) {
- continue;
- } else {
- break;
- }
- }
-
- return ret;
-}
-
-static void release_bat_id(int id)
-{
- mutex_lock(&bat_idr_lock);
- idr_remove(&bat_idr, id);
- mutex_unlock(&bat_idr_lock);
-}
+static DEFINE_IDA(bat_ida);
static int w1_ds2780_add_slave(struct w1_slave *sl)
{
@@ -143,7 +129,7 @@
int id;
struct platform_device *pdev;
- id = new_bat_id();
+ id = ida_simple_get(&bat_ida, 0, 0, GFP_KERNEL);
if (id < 0) {
ret = id;
goto noid;
@@ -172,7 +158,7 @@
pdev_add_failed:
platform_device_unregister(pdev);
pdev_alloc_failed:
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
noid:
return ret;
}
@@ -183,7 +169,7 @@
int id = pdev->id;
platform_device_unregister(pdev);
- release_bat_id(id);
+ ida_simple_remove(&bat_ida, id);
sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2780_bin_attr);
}
@@ -199,14 +185,14 @@
static int __init w1_ds2780_init(void)
{
- idr_init(&bat_idr);
+ ida_init(&bat_ida);
return w1_register_family(&w1_ds2780_family);
}
static void __exit w1_ds2780_exit(void)
{
w1_unregister_family(&w1_ds2780_family);
- idr_destroy(&bat_idr);
+ ida_destroy(&bat_ida);
}
module_init(w1_ds2780_init);
diff --git a/drivers/w1/slaves/w1_ds2780.h b/drivers/w1/slaves/w1_ds2780.h
index a1fba79..7373793 100644
--- a/drivers/w1/slaves/w1_ds2780.h
+++ b/drivers/w1/slaves/w1_ds2780.h
@@ -124,6 +124,8 @@
extern int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
int io);
+extern int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr,
+ size_t count, int io);
extern int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd);
#endif /* !_W1_DS2780_H */
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index d220bce..f79e62e 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -78,6 +78,7 @@
memcpy(&dev->dev, device, sizeof(struct device));
dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
snprintf(dev->name, sizeof(dev->name), "w1_bus_master%u", dev->id);
+ dev->dev.init_name = dev->name;
dev->driver = driver;
diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c
index 765b37b..3135b2c 100644
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@@ -158,13 +158,18 @@
static u8 w1_read_bit(struct w1_master *dev)
{
int result;
+ unsigned long flags;
+ /* sample timing is critical here */
+ local_irq_save(flags);
dev->bus_master->write_bit(dev->bus_master->data, 0);
w1_delay(6);
dev->bus_master->write_bit(dev->bus_master->data, 1);
w1_delay(9);
result = dev->bus_master->read_bit(dev->bus_master->data);
+ local_irq_restore(flags);
+
w1_delay(55);
return result & 0x1;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 86b0735..64c6752 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -726,7 +726,7 @@
config SBC7240_WDT
tristate "SBC Nano 7240 Watchdog Timer"
- depends on X86_32
+ depends on X86_32 && !UML
---help---
This is the driver for the hardware watchdog found on the IEI
single board computers EPIC Nano 7240 (and likely others). This
@@ -1174,6 +1174,10 @@
by Xen 4.0 and newer. The watchdog timeout period is normally one
minute but can be changed with a boot-time parameter.
+config UML_WATCHDOG
+ tristate "UML watchdog"
+ depends on UML
+
#
# ISA-based Watchdog Cards
#
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index b5a1076..879ed88 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1138,7 +1138,7 @@
struct v9fs_session_info *v9ses = sb->s_fs_info;
struct v9fs_inode *v9inode = V9FS_I(inode);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_atime.tv_sec = stat->atime;
inode->i_mtime.tv_sec = stat->mtime;
@@ -1164,7 +1164,7 @@
/* HARDLINKCOUNT %u */
sscanf(ext, "%13s %u", tag_name, &i_nlink);
if (!strncmp(tag_name, "HARDLINKCOUNT", 13))
- inode->i_nlink = i_nlink;
+ set_nlink(inode, i_nlink);
}
}
mode = stat->mode & S_IALLUGO;
diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c
index aded79f..0b5745e 100644
--- a/fs/9p/vfs_inode_dotl.c
+++ b/fs/9p/vfs_inode_dotl.c
@@ -606,7 +606,7 @@
inode->i_ctime.tv_nsec = stat->st_ctime_nsec;
inode->i_uid = stat->st_uid;
inode->i_gid = stat->st_gid;
- inode->i_nlink = stat->st_nlink;
+ set_nlink(inode, stat->st_nlink);
mode = stat->st_mode & S_IALLUGO;
mode |= inode->i_mode & ~S_IALLUGO;
@@ -632,7 +632,7 @@
if (stat->st_result_mask & P9_STATS_GID)
inode->i_gid = stat->st_gid;
if (stat->st_result_mask & P9_STATS_NLINK)
- inode->i_nlink = stat->st_nlink;
+ set_nlink(inode, stat->st_nlink);
if (stat->st_result_mask & P9_STATS_MODE) {
inode->i_mode = stat->st_mode;
if ((S_ISBLK(inode->i_mode)) ||
diff --git a/fs/adfs/inode.c b/fs/adfs/inode.c
index d5250c5..1dab6a1 100644
--- a/fs/adfs/inode.c
+++ b/fs/adfs/inode.c
@@ -247,7 +247,7 @@
inode->i_gid = ADFS_SB(sb)->s_gid;
inode->i_ino = obj->file_id;
inode->i_size = obj->size;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_blocks = (inode->i_size + sb->s_blocksize - 1) >>
sb->s_blocksize_bits;
diff --git a/fs/affs/amigaffs.c b/fs/affs/amigaffs.c
index 3a4557e..de37ec8 100644
--- a/fs/affs/amigaffs.c
+++ b/fs/affs/amigaffs.c
@@ -215,7 +215,7 @@
break;
default:
if (!AFFS_TAIL(sb, bh)->link_chain)
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
affs_free_block(sb, link_ino);
goto done;
@@ -316,7 +316,7 @@
if (inode->i_nlink > 1)
retval = affs_remove_link(dentry);
else
- inode->i_nlink = 0;
+ clear_nlink(inode);
affs_unlock_link(inode);
inode->i_ctime = CURRENT_TIME_SEC;
mark_inode_dirty(inode);
diff --git a/fs/affs/inode.c b/fs/affs/inode.c
index 5d82890..88a4b0b 100644
--- a/fs/affs/inode.c
+++ b/fs/affs/inode.c
@@ -54,7 +54,7 @@
prot = be32_to_cpu(tail->protect);
inode->i_size = 0;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mode = 0;
AFFS_I(inode)->i_extcnt = 1;
AFFS_I(inode)->i_ext_last = ~1;
@@ -137,7 +137,7 @@
sbi->s_hashsize + 1;
}
if (tail->link_chain)
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_mapping->a_ops = (sbi->s_flags & SF_OFS) ? &affs_aops_ofs : &affs_aops;
inode->i_op = &affs_file_inode_operations;
inode->i_fop = &affs_file_operations;
@@ -304,7 +304,7 @@
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
inode->i_ino = block;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
atomic_set(&AFFS_I(inode)->i_opencnt, 0);
AFFS_I(inode)->i_blkcnt = 0;
@@ -387,7 +387,7 @@
AFFS_TAIL(sb, inode_bh)->link_chain = cpu_to_be32(block);
affs_adjust_checksum(inode_bh, block - be32_to_cpu(chain));
mark_buffer_dirty_inode(inode_bh, inode);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
ihold(inode);
}
affs_fix_checksum(sb, bh);
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index e3e9efc..780a11d 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -277,7 +277,7 @@
inode->i_mapping->a_ops = (AFFS_SB(sb)->s_flags & SF_OFS) ? &affs_aops_ofs : &affs_aops;
error = affs_add_entry(dir, inode, dentry, ST_FILE);
if (error) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
iput(inode);
return error;
}
@@ -305,7 +305,7 @@
error = affs_add_entry(dir, inode, dentry, ST_USERDIR);
if (error) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
mark_inode_dirty(inode);
iput(inode);
return error;
@@ -392,7 +392,7 @@
return 0;
err:
- inode->i_nlink = 0;
+ clear_nlink(inode);
mark_inode_dirty(inode);
iput(inode);
return error;
diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c
index 346e328..2f213d1 100644
--- a/fs/afs/fsclient.c
+++ b/fs/afs/fsclient.c
@@ -90,7 +90,7 @@
vnode->vfs_inode.i_uid = status->owner;
vnode->vfs_inode.i_gid = status->group;
vnode->vfs_inode.i_generation = vnode->fid.unique;
- vnode->vfs_inode.i_nlink = status->nlink;
+ set_nlink(&vnode->vfs_inode, status->nlink);
mode = vnode->vfs_inode.i_mode;
mode &= ~S_IALLUGO;
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 0fdab6e..d890ae3 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -67,7 +67,7 @@
fscache_attr_changed(vnode->cache);
#endif
- inode->i_nlink = vnode->status.nlink;
+ set_nlink(inode, vnode->status.nlink);
inode->i_uid = vnode->status.owner;
inode->i_gid = 0;
inode->i_size = vnode->status.size;
@@ -174,7 +174,7 @@
inode->i_size = 0;
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
inode->i_op = &afs_autocell_inode_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_uid = 0;
inode->i_gid = 0;
inode->i_ctime.tv_sec = get_seconds();
diff --git a/fs/aio.c b/fs/aio.c
index 632b235..78c514c 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -440,8 +440,6 @@
static struct kiocb *__aio_get_req(struct kioctx *ctx)
{
struct kiocb *req = NULL;
- struct aio_ring *ring;
- int okay = 0;
req = kmem_cache_alloc(kiocb_cachep, GFP_KERNEL);
if (unlikely(!req))
@@ -459,39 +457,114 @@
INIT_LIST_HEAD(&req->ki_run_list);
req->ki_eventfd = NULL;
- /* Check if the completion queue has enough free space to
- * accept an event from this io.
- */
- spin_lock_irq(&ctx->ctx_lock);
- ring = kmap_atomic(ctx->ring_info.ring_pages[0], KM_USER0);
- if (ctx->reqs_active < aio_ring_avail(&ctx->ring_info, ring)) {
- list_add(&req->ki_list, &ctx->active_reqs);
- ctx->reqs_active++;
- okay = 1;
- }
- kunmap_atomic(ring, KM_USER0);
- spin_unlock_irq(&ctx->ctx_lock);
-
- if (!okay) {
- kmem_cache_free(kiocb_cachep, req);
- req = NULL;
- }
-
return req;
}
-static inline struct kiocb *aio_get_req(struct kioctx *ctx)
+/*
+ * struct kiocb's are allocated in batches to reduce the number of
+ * times the ctx lock is acquired and released.
+ */
+#define KIOCB_BATCH_SIZE 32L
+struct kiocb_batch {
+ struct list_head head;
+ long count; /* number of requests left to allocate */
+};
+
+static void kiocb_batch_init(struct kiocb_batch *batch, long total)
+{
+ INIT_LIST_HEAD(&batch->head);
+ batch->count = total;
+}
+
+static void kiocb_batch_free(struct kiocb_batch *batch)
+{
+ struct kiocb *req, *n;
+
+ list_for_each_entry_safe(req, n, &batch->head, ki_batch) {
+ list_del(&req->ki_batch);
+ kmem_cache_free(kiocb_cachep, req);
+ }
+}
+
+/*
+ * Allocate a batch of kiocbs. This avoids taking and dropping the
+ * context lock a lot during setup.
+ */
+static int kiocb_batch_refill(struct kioctx *ctx, struct kiocb_batch *batch)
+{
+ unsigned short allocated, to_alloc;
+ long avail;
+ bool called_fput = false;
+ struct kiocb *req, *n;
+ struct aio_ring *ring;
+
+ to_alloc = min(batch->count, KIOCB_BATCH_SIZE);
+ for (allocated = 0; allocated < to_alloc; allocated++) {
+ req = __aio_get_req(ctx);
+ if (!req)
+ /* allocation failed, go with what we've got */
+ break;
+ list_add(&req->ki_batch, &batch->head);
+ }
+
+ if (allocated == 0)
+ goto out;
+
+retry:
+ spin_lock_irq(&ctx->ctx_lock);
+ ring = kmap_atomic(ctx->ring_info.ring_pages[0]);
+
+ avail = aio_ring_avail(&ctx->ring_info, ring) - ctx->reqs_active;
+ BUG_ON(avail < 0);
+ if (avail == 0 && !called_fput) {
+ /*
+ * Handle a potential starvation case. It is possible that
+ * we hold the last reference on a struct file, causing us
+ * to delay the final fput to non-irq context. In this case,
+ * ctx->reqs_active is artificially high. Calling the fput
+ * routine here may free up a slot in the event completion
+ * ring, allowing this allocation to succeed.
+ */
+ kunmap_atomic(ring);
+ spin_unlock_irq(&ctx->ctx_lock);
+ aio_fput_routine(NULL);
+ called_fput = true;
+ goto retry;
+ }
+
+ if (avail < allocated) {
+ /* Trim back the number of requests. */
+ list_for_each_entry_safe(req, n, &batch->head, ki_batch) {
+ list_del(&req->ki_batch);
+ kmem_cache_free(kiocb_cachep, req);
+ if (--allocated <= avail)
+ break;
+ }
+ }
+
+ batch->count -= allocated;
+ list_for_each_entry(req, &batch->head, ki_batch) {
+ list_add(&req->ki_list, &ctx->active_reqs);
+ ctx->reqs_active++;
+ }
+
+ kunmap_atomic(ring);
+ spin_unlock_irq(&ctx->ctx_lock);
+
+out:
+ return allocated;
+}
+
+static inline struct kiocb *aio_get_req(struct kioctx *ctx,
+ struct kiocb_batch *batch)
{
struct kiocb *req;
- /* Handle a potential starvation case -- should be exceedingly rare as
- * requests will be stuck on fput_head only if the aio_fput_routine is
- * delayed and the requests were the last user of the struct file.
- */
- req = __aio_get_req(ctx);
- if (unlikely(NULL == req)) {
- aio_fput_routine(NULL);
- req = __aio_get_req(ctx);
- }
+
+ if (list_empty(&batch->head))
+ if (kiocb_batch_refill(ctx, batch) == 0)
+ return NULL;
+ req = list_first_entry(&batch->head, struct kiocb, ki_batch);
+ list_del(&req->ki_batch);
return req;
}
@@ -1515,7 +1588,8 @@
}
static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
- struct iocb *iocb, bool compat)
+ struct iocb *iocb, struct kiocb_batch *batch,
+ bool compat)
{
struct kiocb *req;
struct file *file;
@@ -1541,7 +1615,7 @@
if (unlikely(!file))
return -EBADF;
- req = aio_get_req(ctx); /* returns with 2 references to req */
+ req = aio_get_req(ctx, batch); /* returns with 2 references to req */
if (unlikely(!req)) {
fput(file);
return -EAGAIN;
@@ -1621,8 +1695,9 @@
{
struct kioctx *ctx;
long ret = 0;
- int i;
+ int i = 0;
struct blk_plug plug;
+ struct kiocb_batch batch;
if (unlikely(nr < 0))
return -EINVAL;
@@ -1639,6 +1714,8 @@
return -EINVAL;
}
+ kiocb_batch_init(&batch, nr);
+
blk_start_plug(&plug);
/*
@@ -1659,12 +1736,13 @@
break;
}
- ret = io_submit_one(ctx, user_iocb, &tmp, compat);
+ ret = io_submit_one(ctx, user_iocb, &tmp, &batch, compat);
if (ret)
break;
}
blk_finish_plug(&plug);
+ kiocb_batch_free(&batch);
put_ioctx(ctx);
return i ? i : ret;
}
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index 180fa24..8179f1a 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -342,7 +342,7 @@
inode->i_ino = get_next_ino();
if (S_ISDIR(mode)) {
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_op = &autofs4_dir_inode_operations;
inode->i_fop = &autofs4_dir_operations;
} else if (S_ISLNK(mode)) {
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 720d885..8342ca6 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -357,7 +357,7 @@
inode->i_gid = befs_sb->mount_opts.use_gid ?
befs_sb->mount_opts.gid : (gid_t) fs32_to_cpu(sb, raw_inode->gid);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
/*
* BEFS's time is 64 bits, but current VFS is 32 bits...
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index b14cebf..9cc0740 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -199,7 +199,7 @@
printf("unlinking non-existent file %s:%lu (nlink=%d)\n",
inode->i_sb->s_id, inode->i_ino,
inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
de->ino = 0;
mark_buffer_dirty_inode(bh, dir);
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index a8e37f8..697af5b 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -78,7 +78,7 @@
BFS_I(inode)->i_dsk_ino = le16_to_cpu(di->i_ino);
inode->i_uid = le32_to_cpu(di->i_uid);
inode->i_gid = le32_to_cpu(di->i_gid);
- inode->i_nlink = le32_to_cpu(di->i_nlink);
+ set_nlink(inode, le32_to_cpu(di->i_nlink));
inode->i_size = BFS_FILESIZE(di);
inode->i_blocks = BFS_FILEBLOCKS(di);
inode->i_atime.tv_sec = le32_to_cpu(di->i_atime);
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index dd0fdfc..21ac5ee 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -795,7 +795,16 @@
* might try to exec. This is because the brk will
* follow the loader, and is not movable. */
#if defined(CONFIG_X86) || defined(CONFIG_ARM)
- load_bias = 0;
+ /* Memory randomization might have been switched off
+ * in runtime via sysctl.
+ * If that is the case, retain the original non-zero
+ * load_bias value in order to establish proper
+ * non-randomized mappings.
+ */
+ if (current->flags & PF_RANDOMIZE)
+ load_bias = 0;
+ else
+ load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr);
#else
load_bias = ELF_PAGESTART(ELF_ET_DYN_BASE - vaddr);
#endif
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index ba1a1ae..1e9edbd 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -521,7 +521,7 @@
write_unlock(&entries_lock);
if (dentry) {
- dentry->d_inode->i_nlink--;
+ drop_nlink(dentry->d_inode);
d_drop(dentry);
dput(dentry);
simple_release_fs(&bm_mnt, &entry_count);
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index b52c672..ae4d9cd 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -1641,7 +1641,7 @@
inode->i_gid = btrfs_stack_inode_gid(inode_item);
btrfs_i_size_write(inode, btrfs_stack_inode_size(inode_item));
inode->i_mode = btrfs_stack_inode_mode(inode_item);
- inode->i_nlink = btrfs_stack_inode_nlink(inode_item);
+ set_nlink(inode, btrfs_stack_inode_nlink(inode_item));
inode_set_bytes(inode, btrfs_stack_inode_nbytes(inode_item));
BTRFS_I(inode)->generation = btrfs_stack_inode_generation(inode_item);
BTRFS_I(inode)->sequence = btrfs_stack_inode_sequence(inode_item);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 07b3ac6..07ea918 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1705,7 +1705,7 @@
sb->s_bdi = &fs_info->bdi;
fs_info->btree_inode->i_ino = BTRFS_BTREE_INODE_OBJECTID;
- fs_info->btree_inode->i_nlink = 1;
+ set_nlink(fs_info->btree_inode, 1);
/*
* we set the i_size on the btree inode to the max possible int.
* the real end of the address space is determined by all of
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index b2d004a..75686a6 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2534,7 +2534,7 @@
inode_item = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_inode_item);
inode->i_mode = btrfs_inode_mode(leaf, inode_item);
- inode->i_nlink = btrfs_inode_nlink(leaf, inode_item);
+ set_nlink(inode, btrfs_inode_nlink(leaf, inode_item));
inode->i_uid = btrfs_inode_uid(leaf, inode_item);
inode->i_gid = btrfs_inode_gid(leaf, inode_item);
btrfs_i_size_write(inode, btrfs_inode_size(leaf, inode_item));
@@ -6728,7 +6728,7 @@
inode->i_op = &btrfs_dir_inode_operations;
inode->i_fop = &btrfs_dir_file_operations;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
btrfs_i_size_write(inode, 0);
err = btrfs_update_inode(trans, new_root, inode);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 786639f..0618aa3 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1030,7 +1030,7 @@
}
btrfs_release_path(path);
if (nlink != inode->i_nlink) {
- inode->i_nlink = nlink;
+ set_nlink(inode, nlink);
btrfs_update_inode(trans, root, inode);
}
BTRFS_I(inode)->index_cnt = (u64)-1;
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index b8731bf..15b21e3 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -2363,7 +2363,7 @@
}
if ((issued & CEPH_CAP_LINK_EXCL) == 0)
- inode->i_nlink = le32_to_cpu(grant->nlink);
+ set_nlink(inode, le32_to_cpu(grant->nlink));
if ((issued & CEPH_CAP_XATTR_EXCL) == 0 && grant->xattr_len) {
int len = le32_to_cpu(grant->xattr_len);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 5dde7d51..1616a0d 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -618,7 +618,7 @@
}
if ((issued & CEPH_CAP_LINK_EXCL) == 0)
- inode->i_nlink = le32_to_cpu(info->nlink);
+ set_nlink(inode, le32_to_cpu(info->nlink));
/* be careful with mtime, atime, size */
ceph_decode_timespec(&atime, &info->atime);
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 2cfb695..5d9b9ac 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -204,7 +204,7 @@
}
/* first calculate 24 bytes ntlm response and then 16 byte session key */
-int setup_ntlm_response(struct cifs_ses *ses)
+int setup_ntlm_response(struct cifs_ses *ses, const struct nls_table *nls_cp)
{
int rc = 0;
unsigned int temp_len = CIFS_SESS_KEY_SIZE + CIFS_AUTH_RESP_SIZE;
@@ -221,14 +221,14 @@
ses->auth_key.len = temp_len;
rc = SMBNTencrypt(ses->password, ses->server->cryptkey,
- ses->auth_key.response + CIFS_SESS_KEY_SIZE);
+ ses->auth_key.response + CIFS_SESS_KEY_SIZE, nls_cp);
if (rc) {
cFYI(1, "%s Can't generate NTLM response, error: %d",
__func__, rc);
return rc;
}
- rc = E_md4hash(ses->password, temp_key);
+ rc = E_md4hash(ses->password, temp_key, nls_cp);
if (rc) {
cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc);
return rc;
@@ -404,7 +404,7 @@
}
/* calculate md4 hash of password */
- E_md4hash(ses->password, nt_hash);
+ E_md4hash(ses->password, nt_hash, nls_cp);
rc = crypto_shash_setkey(ses->server->secmech.hmacmd5, nt_hash,
CIFS_NTHASH_SIZE);
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index d9dbaf8..30ff560 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -125,5 +125,5 @@
extern const struct export_operations cifs_export_ops;
#endif /* CONFIG_CIFS_NFSD_EXPORT */
-#define CIFS_VERSION "1.75"
+#define CIFS_VERSION "1.76"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index ef4f631..6f4e243 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -395,8 +395,9 @@
extern int cifs_verify_signature(struct kvec *iov, unsigned int nr_iov,
struct TCP_Server_Info *server,
__u32 expected_sequence_number);
-extern int SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *);
-extern int setup_ntlm_response(struct cifs_ses *);
+extern int SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *,
+ const struct nls_table *);
+extern int setup_ntlm_response(struct cifs_ses *, const struct nls_table *);
extern int setup_ntlmv2_rsp(struct cifs_ses *, const struct nls_table *);
extern int cifs_crypto_shash_allocate(struct TCP_Server_Info *);
extern void cifs_crypto_shash_release(struct TCP_Server_Info *);
@@ -448,7 +449,8 @@
const unsigned char *path,
struct cifs_sb_info *cifs_sb, int xid);
extern int mdfour(unsigned char *, unsigned char *, int);
-extern int E_md4hash(const unsigned char *passwd, unsigned char *p16);
+extern int E_md4hash(const unsigned char *passwd, unsigned char *p16,
+ const struct nls_table *codepage);
extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8,
unsigned char *p24);
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index d545a95..c0458c5 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3452,7 +3452,7 @@
else
#endif /* CIFS_WEAK_PW_HASH */
rc = SMBNTencrypt(tcon->password, ses->server->cryptkey,
- bcc_ptr);
+ bcc_ptr, nls_codepage);
bcc_ptr += CIFS_AUTH_RESP_SIZE;
if (ses->capabilities & CAP_UNICODE) {
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index ea096ce..c1f063c 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -778,7 +778,6 @@
else {
mutex_lock(&cinode->lock_mutex);
list_del_init(&lock->blist);
- mutex_unlock(&cinode->lock_mutex);
}
}
@@ -794,6 +793,9 @@
struct cifsInodeInfo *cinode = CIFS_I(file->f_path.dentry->d_inode);
unsigned char saved_type = flock->fl_type;
+ if ((flock->fl_flags & FL_POSIX) == 0)
+ return 1;
+
mutex_lock(&cinode->lock_mutex);
posix_test_lock(file, flock);
@@ -810,12 +812,15 @@
cifs_posix_lock_set(struct file *file, struct file_lock *flock)
{
struct cifsInodeInfo *cinode = CIFS_I(file->f_path.dentry->d_inode);
- int rc;
+ int rc = 1;
+
+ if ((flock->fl_flags & FL_POSIX) == 0)
+ return rc;
mutex_lock(&cinode->lock_mutex);
if (!cinode->can_cache_brlcks) {
mutex_unlock(&cinode->lock_mutex);
- return 1;
+ return rc;
}
rc = posix_lock_file_wait(file, flock);
mutex_unlock(&cinode->lock_mutex);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 2c50bd2..e851d5b 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -132,7 +132,7 @@
inode->i_mtime = fattr->cf_mtime;
inode->i_ctime = fattr->cf_ctime;
inode->i_rdev = fattr->cf_rdev;
- inode->i_nlink = fattr->cf_nlink;
+ set_nlink(inode, fattr->cf_nlink);
inode->i_uid = fattr->cf_uid;
inode->i_gid = fattr->cf_gid;
@@ -905,7 +905,7 @@
if (rc && tcon->ipc) {
cFYI(1, "ipc connection - fake read inode");
inode->i_mode |= S_IFDIR;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_op = &cifs_ipc_inode_ops;
inode->i_fop = &simple_dir_operations;
inode->i_uid = cifs_sb->mnt_uid;
@@ -1367,7 +1367,7 @@
/* setting nlink not necessary except in cases where we
* failed to get it from the server or was set bogus */
if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2))
- direntry->d_inode->i_nlink = 2;
+ set_nlink(direntry->d_inode, 2);
mode &= ~current_umask();
/* must turn on setgid bit if parent dir has it */
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 8693b5d..6b0e064 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -433,7 +433,7 @@
if (old_file->d_inode) {
cifsInode = CIFS_I(old_file->d_inode);
if (rc == 0) {
- old_file->d_inode->i_nlink++;
+ inc_nlink(old_file->d_inode);
/* BB should we make this contingent on superblock flag NOATIME? */
/* old_file->d_inode->i_ctime = CURRENT_TIME;*/
/* parent dir timestamps will update from srv
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index c7d80e2..4ec3ee9 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -683,7 +683,7 @@
cpu_to_le16(CIFS_AUTH_RESP_SIZE);
/* calculate ntlm response and session key */
- rc = setup_ntlm_response(ses);
+ rc = setup_ntlm_response(ses, nls_cp);
if (rc) {
cERROR(1, "Error %d during NTLM authentication", rc);
goto ssetup_exit;
diff --git a/fs/cifs/smbencrypt.c b/fs/cifs/smbencrypt.c
index ac1221d..7cacba1 100644
--- a/fs/cifs/smbencrypt.c
+++ b/fs/cifs/smbencrypt.c
@@ -199,75 +199,36 @@
return rc;
}
-/* Routines for Windows NT MD4 Hash functions. */
-static int
-_my_wcslen(__u16 *str)
-{
- int len = 0;
- while (*str++ != 0)
- len++;
- return len;
-}
-
-/*
- * Convert a string into an NT UNICODE string.
- * Note that regardless of processor type
- * this must be in intel (little-endian)
- * format.
- */
-
-static int
-_my_mbstowcs(__u16 *dst, const unsigned char *src, int len)
-{ /* BB not a very good conversion routine - change/fix */
- int i;
- __u16 val;
-
- for (i = 0; i < len; i++) {
- val = *src;
- SSVAL(dst, 0, val);
- dst++;
- src++;
- if (val == 0)
- break;
- }
- return i;
-}
-
/*
* Creates the MD4 Hash of the users password in NT UNICODE.
*/
int
-E_md4hash(const unsigned char *passwd, unsigned char *p16)
+E_md4hash(const unsigned char *passwd, unsigned char *p16,
+ const struct nls_table *codepage)
{
int rc;
int len;
__u16 wpwd[129];
/* Password cannot be longer than 128 characters */
- if (passwd) {
- len = strlen((char *) passwd);
- if (len > 128)
- len = 128;
-
- /* Password must be converted to NT unicode */
- _my_mbstowcs(wpwd, passwd, len);
- } else
+ if (passwd) /* Password must be converted to NT unicode */
+ len = cifs_strtoUCS(wpwd, passwd, 128, codepage);
+ else {
len = 0;
+ *wpwd = 0; /* Ensure string is null terminated */
+ }
- wpwd[len] = 0; /* Ensure string is null terminated */
- /* Calculate length in bytes */
- len = _my_wcslen(wpwd) * sizeof(__u16);
-
- rc = mdfour(p16, (unsigned char *) wpwd, len);
- memset(wpwd, 0, 129 * 2);
+ rc = mdfour(p16, (unsigned char *) wpwd, len * sizeof(__u16));
+ memset(wpwd, 0, 129 * sizeof(__u16));
return rc;
}
/* Does the NT MD4 hash then des encryption. */
int
-SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24)
+SMBNTencrypt(unsigned char *passwd, unsigned char *c8, unsigned char *p24,
+ const struct nls_table *codepage)
{
int rc;
unsigned char p16[16], p21[21];
@@ -275,7 +236,7 @@
memset(p16, '\0', 16);
memset(p21, '\0', 21);
- rc = E_md4hash(passwd, p16);
+ rc = E_md4hash(passwd, p16, codepage);
if (rc) {
cFYI(1, "%s Can't generate NT hash, error: %d", __func__, rc);
return rc;
diff --git a/fs/coda/coda_linux.c b/fs/coda/coda_linux.c
index 2bdbcc1..854ace7 100644
--- a/fs/coda/coda_linux.c
+++ b/fs/coda/coda_linux.c
@@ -104,7 +104,7 @@
if (attr->va_gid != -1)
inode->i_gid = (gid_t) attr->va_gid;
if (attr->va_nlink != -1)
- inode->i_nlink = attr->va_nlink;
+ set_nlink(inode, attr->va_nlink);
if (attr->va_size != -1)
inode->i_size = attr->va_size;
if (attr->va_size != -1)
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index 0239433..28e7e13 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -340,7 +340,7 @@
if (!error) {
/* VFS may delete the child */
if (de->d_inode)
- de->d_inode->i_nlink = 0;
+ clear_nlink(de->d_inode);
/* fix the link count of the parent */
coda_dir_drop_nlink(dir);
diff --git a/fs/dcache.c b/fs/dcache.c
index a88948b..274f13e 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -225,7 +225,7 @@
}
/*
- * dentry_lru_(add|del|move_tail) must be called with d_lock held.
+ * dentry_lru_(add|del|prune|move_tail) must be called with d_lock held.
*/
static void dentry_lru_add(struct dentry *dentry)
{
@@ -245,6 +245,9 @@
dentry_stat.nr_unused--;
}
+/*
+ * Remove a dentry with references from the LRU.
+ */
static void dentry_lru_del(struct dentry *dentry)
{
if (!list_empty(&dentry->d_lru)) {
@@ -254,6 +257,23 @@
}
}
+/*
+ * Remove a dentry that is unreferenced and about to be pruned
+ * (unhashed and destroyed) from the LRU, and inform the file system.
+ * This wrapper should be called _prior_ to unhashing a victim dentry.
+ */
+static void dentry_lru_prune(struct dentry *dentry)
+{
+ if (!list_empty(&dentry->d_lru)) {
+ if (dentry->d_flags & DCACHE_OP_PRUNE)
+ dentry->d_op->d_prune(dentry);
+
+ spin_lock(&dcache_lru_lock);
+ __dentry_lru_del(dentry);
+ spin_unlock(&dcache_lru_lock);
+ }
+}
+
static void dentry_lru_move_tail(struct dentry *dentry)
{
spin_lock(&dcache_lru_lock);
@@ -403,8 +423,12 @@
if (ref)
dentry->d_count--;
- /* if dentry was on the d_lru list delete it from there */
- dentry_lru_del(dentry);
+ /*
+ * if dentry was on the d_lru list delete it from there.
+ * inform the fs via d_prune that this dentry is about to be
+ * unhashed and destroyed.
+ */
+ dentry_lru_prune(dentry);
/* if it was on the hash then remove it */
__d_drop(dentry);
return d_kill(dentry, parent);
@@ -854,8 +878,12 @@
do {
struct inode *inode;
- /* detach from the system */
- dentry_lru_del(dentry);
+ /*
+ * remove the dentry from the lru, and inform
+ * the fs that this dentry is about to be
+ * unhashed and destroyed.
+ */
+ dentry_lru_prune(dentry);
__d_shrink(dentry);
if (dentry->d_count != 0) {
@@ -1283,6 +1311,8 @@
dentry->d_flags |= DCACHE_OP_REVALIDATE;
if (op->d_delete)
dentry->d_flags |= DCACHE_OP_DELETE;
+ if (op->d_prune)
+ dentry->d_flags |= DCACHE_OP_PRUNE;
}
EXPORT_SYMBOL(d_set_d_op);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 2f27e57..d5d5297 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -307,7 +307,7 @@
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO | S_IWUSR;
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
s->s_root = d_alloc_root(inode);
if (s->s_root)
@@ -549,7 +549,7 @@
dentry = d_find_alias(inode);
- inode->i_nlink--;
+ drop_nlink(inode);
d_delete(dentry);
dput(dentry); /* d_alloc_name() in devpts_pty_new() */
dput(dentry); /* d_find_alias above */
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 11f8582..a36d327 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -474,8 +474,8 @@
goto out_lock;
fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
- old_dentry->d_inode->i_nlink =
- ecryptfs_inode_to_lower(old_dentry->d_inode)->i_nlink;
+ set_nlink(old_dentry->d_inode,
+ ecryptfs_inode_to_lower(old_dentry->d_inode)->i_nlink);
i_size_write(new_dentry->d_inode, file_size_save);
out_lock:
unlock_dir(lower_dir_dentry);
@@ -499,8 +499,8 @@
goto out_unlock;
}
fsstack_copy_attr_times(dir, lower_dir_inode);
- dentry->d_inode->i_nlink =
- ecryptfs_inode_to_lower(dentry->d_inode)->i_nlink;
+ set_nlink(dentry->d_inode,
+ ecryptfs_inode_to_lower(dentry->d_inode)->i_nlink);
dentry->d_inode->i_ctime = dir->i_ctime;
d_drop(dentry);
out_unlock:
@@ -565,7 +565,7 @@
goto out;
fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
- dir->i_nlink = lower_dir_dentry->d_inode->i_nlink;
+ set_nlink(dir, lower_dir_dentry->d_inode->i_nlink);
out:
unlock_dir(lower_dir_dentry);
if (!dentry->d_inode)
@@ -588,7 +588,7 @@
if (!rc && dentry->d_inode)
clear_nlink(dentry->d_inode);
fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
- dir->i_nlink = lower_dir_dentry->d_inode->i_nlink;
+ set_nlink(dir, lower_dir_dentry->d_inode->i_nlink);
unlock_dir(lower_dir_dentry);
if (!rc)
d_drop(dentry);
diff --git a/fs/efs/inode.c b/fs/efs/inode.c
index 9c13412..bc84f36 100644
--- a/fs/efs/inode.c
+++ b/fs/efs/inode.c
@@ -96,7 +96,7 @@
efs_inode = (struct efs_dinode *) (bh->b_data + offset);
inode->i_mode = be16_to_cpu(efs_inode->di_mode);
- inode->i_nlink = be16_to_cpu(efs_inode->di_nlink);
+ set_nlink(inode, be16_to_cpu(efs_inode->di_nlink));
inode->i_uid = (uid_t)be16_to_cpu(efs_inode->di_uid);
inode->i_gid = (gid_t)be16_to_cpu(efs_inode->di_gid);
inode->i_size = be32_to_cpu(efs_inode->di_size);
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 3e5f3a6..f6dbf77 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -1165,7 +1165,7 @@
inode->i_mode = le16_to_cpu(fcb.i_mode);
inode->i_uid = le32_to_cpu(fcb.i_uid);
inode->i_gid = le32_to_cpu(fcb.i_gid);
- inode->i_nlink = le16_to_cpu(fcb.i_links_count);
+ set_nlink(inode, le16_to_cpu(fcb.i_links_count));
inode->i_ctime.tv_sec = (signed)le32_to_cpu(fcb.i_ctime);
inode->i_atime.tv_sec = (signed)le32_to_cpu(fcb.i_atime);
inode->i_mtime.tv_sec = (signed)le32_to_cpu(fcb.i_mtime);
diff --git a/fs/ext2/balloc.c b/fs/ext2/balloc.c
index 8f44cef..a8cbe1b 100644
--- a/fs/ext2/balloc.c
+++ b/fs/ext2/balloc.c
@@ -421,7 +421,7 @@
void ext2_init_block_alloc_info(struct inode *inode)
{
struct ext2_inode_info *ei = EXT2_I(inode);
- struct ext2_block_alloc_info *block_i = ei->i_block_alloc_info;
+ struct ext2_block_alloc_info *block_i;
struct super_block *sb = inode->i_sb;
block_i = kmalloc(sizeof(*block_i), GFP_NOFS);
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index ee9ed31..c4e81df 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -601,7 +601,7 @@
fail_drop:
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
return ERR_PTR(err);
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index a8a58f6..91a6945 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -1321,7 +1321,7 @@
inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16;
inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16;
}
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
inode->i_size = le32_to_cpu(raw_inode->i_size);
inode->i_atime.tv_sec = (signed)le32_to_cpu(raw_inode->i_atime);
inode->i_ctime.tv_sec = (signed)le32_to_cpu(raw_inode->i_ctime);
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 1dd62ed..bd8ac16 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -327,10 +327,10 @@
if (ino > le32_to_cpu(EXT2_SB(sb)->s_es->s_inodes_count))
return ERR_PTR(-ESTALE);
- /* iget isn't really right if the inode is currently unallocated!!
- * ext2_read_inode currently does appropriate checks, but
- * it might be "neater" to call ext2_get_inode first and check
- * if the inode is valid.....
+ /*
+ * ext2_iget isn't quite right if the inode is currently unallocated!
+ * However ext2_iget currently does appropriate checks to handle stale
+ * inodes so everything is OK.
*/
inode = ext2_iget(sb, ino);
if (IS_ERR(inode))
diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c
index 6386d76..a203892 100644
--- a/fs/ext3/balloc.c
+++ b/fs/ext3/balloc.c
@@ -427,7 +427,7 @@
void ext3_init_block_alloc_info(struct inode *inode)
{
struct ext3_inode_info *ei = EXT3_I(inode);
- struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info;
+ struct ext3_block_alloc_info *block_i;
struct super_block *sb = inode->i_sb;
block_i = kmalloc(sizeof(*block_i), GFP_NOFS);
@@ -1440,14 +1440,14 @@
*
* Check if filesystem has at least 1 free block available for allocation.
*/
-static int ext3_has_free_blocks(struct ext3_sb_info *sbi)
+static int ext3_has_free_blocks(struct ext3_sb_info *sbi, int use_reservation)
{
ext3_fsblk_t free_blocks, root_blocks;
free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
root_blocks = le32_to_cpu(sbi->s_es->s_r_blocks_count);
if (free_blocks < root_blocks + 1 && !capable(CAP_SYS_RESOURCE) &&
- sbi->s_resuid != current_fsuid() &&
+ !use_reservation && sbi->s_resuid != current_fsuid() &&
(sbi->s_resgid == 0 || !in_group_p (sbi->s_resgid))) {
return 0;
}
@@ -1468,7 +1468,7 @@
*/
int ext3_should_retry_alloc(struct super_block *sb, int *retries)
{
- if (!ext3_has_free_blocks(EXT3_SB(sb)) || (*retries)++ > 3)
+ if (!ext3_has_free_blocks(EXT3_SB(sb), 0) || (*retries)++ > 3)
return 0;
jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id);
@@ -1546,7 +1546,7 @@
if (block_i && ((windowsz = block_i->rsv_window_node.rsv_goal_size) > 0))
my_rsv = &block_i->rsv_window_node;
- if (!ext3_has_free_blocks(sbi)) {
+ if (!ext3_has_free_blocks(sbi, IS_NOQUOTA(inode))) {
*errp = -ENOSPC;
goto out;
}
@@ -1924,9 +1924,10 @@
* reaches any used block. Then issue a TRIM command on this extent and free
* the extent in the block bitmap. This is done until whole group is scanned.
*/
-ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, unsigned int group,
- ext3_grpblk_t start, ext3_grpblk_t max,
- ext3_grpblk_t minblocks)
+static ext3_grpblk_t ext3_trim_all_free(struct super_block *sb,
+ unsigned int group,
+ ext3_grpblk_t start, ext3_grpblk_t max,
+ ext3_grpblk_t minblocks)
{
handle_t *handle;
ext3_grpblk_t next, free_blocks, bit, freed, count = 0;
diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c
index d494c55..1860ed3 100644
--- a/fs/ext3/fsync.c
+++ b/fs/ext3/fsync.c
@@ -61,13 +61,6 @@
if (ret)
goto out;
- /*
- * Taking the mutex here just to keep consistent with how fsync was
- * called previously, however it looks like we don't need to take
- * i_mutex at all.
- */
- mutex_lock(&inode->i_mutex);
-
J_ASSERT(ext3_journal_current_handle() == NULL);
/*
@@ -85,7 +78,6 @@
* safe in-journal, which is all fsync() needs to ensure.
*/
if (ext3_should_journal_data(inode)) {
- mutex_unlock(&inode->i_mutex);
ret = ext3_force_commit(inode->i_sb);
goto out;
}
@@ -108,8 +100,6 @@
*/
if (needs_barrier)
blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
-
- mutex_unlock(&inode->i_mutex);
out:
trace_ext3_sync_file_exit(inode, ret);
return ret;
diff --git a/fs/ext3/ialloc.c b/fs/ext3/ialloc.c
index bf09cbf..5c866e0 100644
--- a/fs/ext3/ialloc.c
+++ b/fs/ext3/ialloc.c
@@ -178,42 +178,6 @@
}
/*
- * There are two policies for allocating an inode. If the new inode is
- * a directory, then a forward search is made for a block group with both
- * free space and a low directory-to-inode ratio; if that fails, then of
- * the groups with above-average free space, that group with the fewest
- * directories already is chosen.
- *
- * For other inodes, search forward from the parent directory\'s block
- * group to find a free inode.
- */
-static int find_group_dir(struct super_block *sb, struct inode *parent)
-{
- int ngroups = EXT3_SB(sb)->s_groups_count;
- unsigned int freei, avefreei;
- struct ext3_group_desc *desc, *best_desc = NULL;
- int group, best_group = -1;
-
- freei = percpu_counter_read_positive(&EXT3_SB(sb)->s_freeinodes_counter);
- avefreei = freei / ngroups;
-
- for (group = 0; group < ngroups; group++) {
- desc = ext3_get_group_desc (sb, group, NULL);
- if (!desc || !desc->bg_free_inodes_count)
- continue;
- if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
- continue;
- if (!best_desc ||
- (le16_to_cpu(desc->bg_free_blocks_count) >
- le16_to_cpu(best_desc->bg_free_blocks_count))) {
- best_group = group;
- best_desc = desc;
- }
- }
- return best_group;
-}
-
-/*
* Orlov's allocator for directories.
*
* We always try to spread first-level directories.
@@ -436,12 +400,9 @@
sbi = EXT3_SB(sb);
es = sbi->s_es;
- if (S_ISDIR(mode)) {
- if (test_opt (sb, OLDALLOC))
- group = find_group_dir(sb, dir);
- else
- group = find_group_orlov(sb, dir);
- } else
+ if (S_ISDIR(mode))
+ group = find_group_orlov(sb, dir);
+ else
group = find_group_other(sb, dir);
err = -ENOSPC;
@@ -621,7 +582,7 @@
fail_drop:
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
brelse(bitmap_bh);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 12661e1..85fe655 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2899,7 +2899,7 @@
inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16;
inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16;
}
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
inode->i_size = le32_to_cpu(raw_inode->i_size);
inode->i_atime.tv_sec = (signed)le32_to_cpu(raw_inode->i_atime);
inode->i_ctime.tv_sec = (signed)le32_to_cpu(raw_inode->i_ctime);
diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c
index c7f4394..ba1b54e 100644
--- a/fs/ext3/ioctl.c
+++ b/fs/ext3/ioctl.c
@@ -150,30 +150,6 @@
mnt_drop_write(filp->f_path.mnt);
return err;
}
-#ifdef CONFIG_JBD_DEBUG
- case EXT3_IOC_WAIT_FOR_READONLY:
- /*
- * This is racy - by the time we're woken up and running,
- * the superblock could be released. And the module could
- * have been unloaded. So sue me.
- *
- * Returns 1 if it slept, else zero.
- */
- {
- struct super_block *sb = inode->i_sb;
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&EXT3_SB(sb)->ro_wait_queue, &wait);
- if (timer_pending(&EXT3_SB(sb)->turn_ro_timer)) {
- schedule();
- ret = 1;
- }
- remove_wait_queue(&EXT3_SB(sb)->ro_wait_queue, &wait);
- return ret;
- }
-#endif
case EXT3_IOC_GETRSVSZ:
if (test_opt(inode->i_sb, RESERVATION)
&& S_ISREG(inode->i_mode)
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 0629e09..642dc6d 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -1821,7 +1821,7 @@
de->name_len = 2;
strcpy (de->name, "..");
ext3_set_de_type(dir->i_sb, de, S_IFDIR);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
BUFFER_TRACE(dir_block, "call ext3_journal_dirty_metadata");
err = ext3_journal_dirty_metadata(handle, dir_block);
if (err)
@@ -1833,7 +1833,7 @@
if (err) {
out_clear_inode:
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
ext3_mark_inode_dirty(handle, inode);
iput (inode);
@@ -2170,7 +2170,7 @@
ext3_warning (inode->i_sb, "ext3_unlink",
"Deleting nonexistent file (%lu), %d",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
retval = ext3_delete_entry(handle, dir, de, bh);
if (retval)
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 7beb69a..922d289 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -652,8 +652,6 @@
seq_puts(seq, ",nouid32");
if (test_opt(sb, DEBUG))
seq_puts(seq, ",debug");
- if (test_opt(sb, OLDALLOC))
- seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT3_FS_XATTR
if (test_opt(sb, XATTR_USER))
seq_puts(seq, ",user_xattr");
@@ -1049,10 +1047,12 @@
set_opt (sbi->s_mount_opt, DEBUG);
break;
case Opt_oldalloc:
- set_opt (sbi->s_mount_opt, OLDALLOC);
+ ext3_msg(sb, KERN_WARNING,
+ "Ignoring deprecated oldalloc option");
break;
case Opt_orlov:
- clear_opt (sbi->s_mount_opt, OLDALLOC);
+ ext3_msg(sb, KERN_WARNING,
+ "Ignoring deprecated orlov option");
break;
#ifdef CONFIG_EXT3_FS_XATTR
case Opt_user_xattr:
@@ -2669,13 +2669,13 @@
/*
* If we have an unprocessed orphan list hanging
* around from a previously readonly bdev mount,
- * require a full umount/remount for now.
+ * require a full umount & mount for now.
*/
if (es->s_last_orphan) {
ext3_msg(sb, KERN_WARNING, "warning: couldn't "
"remount RDWR because of unprocessed "
"orphan inode list. Please "
- "umount/remount instead.");
+ "umount & mount instead.");
err = -EINVAL;
goto restore_opts;
}
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index f8224ad..f6dba45 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -28,7 +28,8 @@
*/
/*
- * Calculate the block group number and offset, given a block number
+ * Calculate the block group number and offset into the block/cluster
+ * allocation bitmap, given a block number
*/
void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr,
ext4_group_t *blockgrpp, ext4_grpblk_t *offsetp)
@@ -37,7 +38,8 @@
ext4_grpblk_t offset;
blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
- offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb));
+ offset = do_div(blocknr, EXT4_BLOCKS_PER_GROUP(sb)) >>
+ EXT4_SB(sb)->s_cluster_bits;
if (offsetp)
*offsetp = offset;
if (blockgrpp)
@@ -55,131 +57,170 @@
return 0;
}
-static int ext4_group_used_meta_blocks(struct super_block *sb,
+/* Return the number of clusters used for file system metadata; this
+ * represents the overhead needed by the file system.
+ */
+unsigned ext4_num_overhead_clusters(struct super_block *sb,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp)
+{
+ unsigned num_clusters;
+ int block_cluster = -1, inode_cluster = -1, itbl_cluster = -1, i, c;
+ ext4_fsblk_t start = ext4_group_first_block_no(sb, block_group);
+ ext4_fsblk_t itbl_blk;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+
+ /* This is the number of clusters used by the superblock,
+ * block group descriptors, and reserved block group
+ * descriptor blocks */
+ num_clusters = ext4_num_base_meta_clusters(sb, block_group);
+
+ /*
+ * For the allocation bitmaps and inode table, we first need
+ * to check to see if the block is in the block group. If it
+ * is, then check to see if the cluster is already accounted
+ * for in the clusters used for the base metadata cluster, or
+ * if we can increment the base metadata cluster to include
+ * that block. Otherwise, we will have to track the cluster
+ * used for the allocation bitmap or inode table explicitly.
+ * Normally all of these blocks are contiguous, so the special
+ * case handling shouldn't be necessary except for *very*
+ * unusual file system layouts.
+ */
+ if (ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp), block_group)) {
+ block_cluster = EXT4_B2C(sbi, (start -
+ ext4_block_bitmap(sb, gdp)));
+ if (block_cluster < num_clusters)
+ block_cluster = -1;
+ else if (block_cluster == num_clusters) {
+ num_clusters++;
+ block_cluster = -1;
+ }
+ }
+
+ if (ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp), block_group)) {
+ inode_cluster = EXT4_B2C(sbi,
+ start - ext4_inode_bitmap(sb, gdp));
+ if (inode_cluster < num_clusters)
+ inode_cluster = -1;
+ else if (inode_cluster == num_clusters) {
+ num_clusters++;
+ inode_cluster = -1;
+ }
+ }
+
+ itbl_blk = ext4_inode_table(sb, gdp);
+ for (i = 0; i < sbi->s_itb_per_group; i++) {
+ if (ext4_block_in_group(sb, itbl_blk + i, block_group)) {
+ c = EXT4_B2C(sbi, start - itbl_blk + i);
+ if ((c < num_clusters) || (c == inode_cluster) ||
+ (c == block_cluster) || (c == itbl_cluster))
+ continue;
+ if (c == num_clusters) {
+ num_clusters++;
+ continue;
+ }
+ num_clusters++;
+ itbl_cluster = c;
+ }
+ }
+
+ if (block_cluster != -1)
+ num_clusters++;
+ if (inode_cluster != -1)
+ num_clusters++;
+
+ return num_clusters;
+}
+
+static unsigned int num_clusters_in_group(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ unsigned int blocks;
+
+ if (block_group == ext4_get_groups_count(sb) - 1) {
+ /*
+ * Even though mke2fs always initializes the first and
+ * last group, just in case some other tool was used,
+ * we need to make sure we calculate the right free
+ * blocks.
+ */
+ blocks = ext4_blocks_count(EXT4_SB(sb)->s_es) -
+ ext4_group_first_block_no(sb, block_group);
+ } else
+ blocks = EXT4_BLOCKS_PER_GROUP(sb);
+ return EXT4_NUM_B2C(EXT4_SB(sb), blocks);
+}
+
+/* Initializes an uninitialized block bitmap */
+void ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp)
+{
+ unsigned int bit, bit_max;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ ext4_fsblk_t start, tmp;
+ int flex_bg = 0;
+
+ J_ASSERT_BH(bh, buffer_locked(bh));
+
+ /* If checksum is bad mark all blocks used to prevent allocation
+ * essentially implementing a per-group read-only flag. */
+ if (!ext4_group_desc_csum_verify(sbi, block_group, gdp)) {
+ ext4_error(sb, "Checksum bad for group %u", block_group);
+ ext4_free_group_clusters_set(sb, gdp, 0);
+ ext4_free_inodes_set(sb, gdp, 0);
+ ext4_itable_unused_set(sb, gdp, 0);
+ memset(bh->b_data, 0xff, sb->s_blocksize);
+ return;
+ }
+ memset(bh->b_data, 0, sb->s_blocksize);
+
+ bit_max = ext4_num_base_meta_clusters(sb, block_group);
+ for (bit = 0; bit < bit_max; bit++)
+ ext4_set_bit(bit, bh->b_data);
+
+ start = ext4_group_first_block_no(sb, block_group);
+
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ flex_bg = 1;
+
+ /* Set bits for block and inode bitmaps, and inode table */
+ tmp = ext4_block_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data);
+
+ tmp = ext4_inode_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data);
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(EXT4_B2C(sbi, tmp - start), bh->b_data);
+ }
+
+ /*
+ * Also if the number of blocks within the group is less than
+ * the blocksize * 8 ( which is the size of bitmap ), set rest
+ * of the block bitmap to 1
+ */
+ ext4_mark_bitmap_end(num_clusters_in_group(sb, block_group),
+ sb->s_blocksize * 8, bh->b_data);
+}
+
+/* Return the number of free blocks in a block group. It is used when
+ * the block bitmap is uninitialized, so we can't just count the bits
+ * in the bitmap. */
+unsigned ext4_free_clusters_after_init(struct super_block *sb,
ext4_group_t block_group,
struct ext4_group_desc *gdp)
{
- ext4_fsblk_t tmp;
- struct ext4_sb_info *sbi = EXT4_SB(sb);
- /* block bitmap, inode bitmap, and inode table blocks */
- int used_blocks = sbi->s_itb_per_group + 2;
-
- if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
- if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp),
- block_group))
- used_blocks--;
-
- if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp),
- block_group))
- used_blocks--;
-
- tmp = ext4_inode_table(sb, gdp);
- for (; tmp < ext4_inode_table(sb, gdp) +
- sbi->s_itb_per_group; tmp++) {
- if (!ext4_block_in_group(sb, tmp, block_group))
- used_blocks -= 1;
- }
- }
- return used_blocks;
+ return num_clusters_in_group(sb, block_group) -
+ ext4_num_overhead_clusters(sb, block_group, gdp);
}
-/* Initializes an uninitialized block bitmap if given, and returns the
- * number of blocks free in the group. */
-unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
- ext4_group_t block_group, struct ext4_group_desc *gdp)
-{
- int bit, bit_max;
- ext4_group_t ngroups = ext4_get_groups_count(sb);
- unsigned free_blocks, group_blocks;
- struct ext4_sb_info *sbi = EXT4_SB(sb);
-
- if (bh) {
- J_ASSERT_BH(bh, buffer_locked(bh));
-
- /* If checksum is bad mark all blocks used to prevent allocation
- * essentially implementing a per-group read-only flag. */
- if (!ext4_group_desc_csum_verify(sbi, block_group, gdp)) {
- ext4_error(sb, "Checksum bad for group %u",
- block_group);
- ext4_free_blks_set(sb, gdp, 0);
- ext4_free_inodes_set(sb, gdp, 0);
- ext4_itable_unused_set(sb, gdp, 0);
- memset(bh->b_data, 0xff, sb->s_blocksize);
- return 0;
- }
- memset(bh->b_data, 0, sb->s_blocksize);
- }
-
- /* Check for superblock and gdt backups in this group */
- bit_max = ext4_bg_has_super(sb, block_group);
-
- if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG) ||
- block_group < le32_to_cpu(sbi->s_es->s_first_meta_bg) *
- sbi->s_desc_per_block) {
- if (bit_max) {
- bit_max += ext4_bg_num_gdb(sb, block_group);
- bit_max +=
- le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks);
- }
- } else { /* For META_BG_BLOCK_GROUPS */
- bit_max += ext4_bg_num_gdb(sb, block_group);
- }
-
- if (block_group == ngroups - 1) {
- /*
- * Even though mke2fs always initialize first and last group
- * if some other tool enabled the EXT4_BG_BLOCK_UNINIT we need
- * to make sure we calculate the right free blocks
- */
- group_blocks = ext4_blocks_count(sbi->s_es) -
- ext4_group_first_block_no(sb, ngroups - 1);
- } else {
- group_blocks = EXT4_BLOCKS_PER_GROUP(sb);
- }
-
- free_blocks = group_blocks - bit_max;
-
- if (bh) {
- ext4_fsblk_t start, tmp;
- int flex_bg = 0;
-
- for (bit = 0; bit < bit_max; bit++)
- ext4_set_bit(bit, bh->b_data);
-
- start = ext4_group_first_block_no(sb, block_group);
-
- if (EXT4_HAS_INCOMPAT_FEATURE(sb,
- EXT4_FEATURE_INCOMPAT_FLEX_BG))
- flex_bg = 1;
-
- /* Set bits for block and inode bitmaps, and inode table */
- tmp = ext4_block_bitmap(sb, gdp);
- if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
- ext4_set_bit(tmp - start, bh->b_data);
-
- tmp = ext4_inode_bitmap(sb, gdp);
- if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
- ext4_set_bit(tmp - start, bh->b_data);
-
- tmp = ext4_inode_table(sb, gdp);
- for (; tmp < ext4_inode_table(sb, gdp) +
- sbi->s_itb_per_group; tmp++) {
- if (!flex_bg ||
- ext4_block_in_group(sb, tmp, block_group))
- ext4_set_bit(tmp - start, bh->b_data);
- }
- /*
- * Also if the number of blocks within the group is
- * less than the blocksize * 8 ( which is the size
- * of bitmap ), set rest of the block bitmap to 1
- */
- ext4_mark_bitmap_end(group_blocks, sb->s_blocksize * 8,
- bh->b_data);
- }
- return free_blocks - ext4_group_used_meta_blocks(sb, block_group, gdp);
-}
-
-
/*
* The free blocks are managed by bitmaps. A file system contains several
* blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap
@@ -362,53 +403,54 @@
}
/**
- * ext4_has_free_blocks()
+ * ext4_has_free_clusters()
* @sbi: in-core super block structure.
- * @nblocks: number of needed blocks
+ * @nclusters: number of needed blocks
+ * @flags: flags from ext4_mb_new_blocks()
*
- * Check if filesystem has nblocks free & available for allocation.
+ * Check if filesystem has nclusters free & available for allocation.
* On success return 1, return 0 on failure.
*/
-static int ext4_has_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks, unsigned int flags)
+static int ext4_has_free_clusters(struct ext4_sb_info *sbi,
+ s64 nclusters, unsigned int flags)
{
- s64 free_blocks, dirty_blocks, root_blocks;
- struct percpu_counter *fbc = &sbi->s_freeblocks_counter;
- struct percpu_counter *dbc = &sbi->s_dirtyblocks_counter;
+ s64 free_clusters, dirty_clusters, root_clusters;
+ struct percpu_counter *fcc = &sbi->s_freeclusters_counter;
+ struct percpu_counter *dcc = &sbi->s_dirtyclusters_counter;
- free_blocks = percpu_counter_read_positive(fbc);
- dirty_blocks = percpu_counter_read_positive(dbc);
- root_blocks = ext4_r_blocks_count(sbi->s_es);
+ free_clusters = percpu_counter_read_positive(fcc);
+ dirty_clusters = percpu_counter_read_positive(dcc);
+ root_clusters = EXT4_B2C(sbi, ext4_r_blocks_count(sbi->s_es));
- if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
- EXT4_FREEBLOCKS_WATERMARK) {
- free_blocks = percpu_counter_sum_positive(fbc);
- dirty_blocks = percpu_counter_sum_positive(dbc);
+ if (free_clusters - (nclusters + root_clusters + dirty_clusters) <
+ EXT4_FREECLUSTERS_WATERMARK) {
+ free_clusters = EXT4_C2B(sbi, percpu_counter_sum_positive(fcc));
+ dirty_clusters = percpu_counter_sum_positive(dcc);
}
- /* Check whether we have space after
- * accounting for current dirty blocks & root reserved blocks.
+ /* Check whether we have space after accounting for current
+ * dirty clusters & root reserved clusters.
*/
- if (free_blocks >= ((root_blocks + nblocks) + dirty_blocks))
+ if (free_clusters >= ((root_clusters + nclusters) + dirty_clusters))
return 1;
- /* Hm, nope. Are (enough) root reserved blocks available? */
+ /* Hm, nope. Are (enough) root reserved clusters available? */
if (sbi->s_resuid == current_fsuid() ||
((sbi->s_resgid != 0) && in_group_p(sbi->s_resgid)) ||
capable(CAP_SYS_RESOURCE) ||
(flags & EXT4_MB_USE_ROOT_BLOCKS)) {
- if (free_blocks >= (nblocks + dirty_blocks))
+ if (free_clusters >= (nclusters + dirty_clusters))
return 1;
}
return 0;
}
-int ext4_claim_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks, unsigned int flags)
+int ext4_claim_free_clusters(struct ext4_sb_info *sbi,
+ s64 nclusters, unsigned int flags)
{
- if (ext4_has_free_blocks(sbi, nblocks, flags)) {
- percpu_counter_add(&sbi->s_dirtyblocks_counter, nblocks);
+ if (ext4_has_free_clusters(sbi, nclusters, flags)) {
+ percpu_counter_add(&sbi->s_dirtyclusters_counter, nclusters);
return 0;
} else
return -ENOSPC;
@@ -428,7 +470,7 @@
*/
int ext4_should_retry_alloc(struct super_block *sb, int *retries)
{
- if (!ext4_has_free_blocks(EXT4_SB(sb), 1, 0) ||
+ if (!ext4_has_free_clusters(EXT4_SB(sb), 1, 0) ||
(*retries)++ > 3 ||
!EXT4_SB(sb)->s_journal)
return 0;
@@ -444,7 +486,7 @@
* @handle: handle to this transaction
* @inode: file inode
* @goal: given target block(filesystem wide)
- * @count: pointer to total number of blocks needed
+ * @count: pointer to total number of clusters needed
* @errp: error code
*
* Return 1st allocated block number on success, *count stores total account
@@ -476,18 +518,19 @@
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
EXT4_I(inode)->i_allocated_meta_blocks += ar.len;
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- dquot_alloc_block_nofail(inode, ar.len);
+ dquot_alloc_block_nofail(inode,
+ EXT4_C2B(EXT4_SB(inode->i_sb), ar.len));
}
return ret;
}
/**
- * ext4_count_free_blocks() -- count filesystem free blocks
+ * ext4_count_free_clusters() -- count filesystem free clusters
* @sb: superblock
*
- * Adds up the number of free blocks from each block group.
+ * Adds up the number of free clusters from each block group.
*/
-ext4_fsblk_t ext4_count_free_blocks(struct super_block *sb)
+ext4_fsblk_t ext4_count_free_clusters(struct super_block *sb)
{
ext4_fsblk_t desc_count;
struct ext4_group_desc *gdp;
@@ -508,7 +551,7 @@
gdp = ext4_get_group_desc(sb, i, NULL);
if (!gdp)
continue;
- desc_count += ext4_free_blks_count(sb, gdp);
+ desc_count += ext4_free_group_clusters(sb, gdp);
brelse(bitmap_bh);
bitmap_bh = ext4_read_block_bitmap(sb, i);
if (bitmap_bh == NULL)
@@ -516,12 +559,13 @@
x = ext4_count_free(bitmap_bh, sb->s_blocksize);
printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n",
- i, ext4_free_blks_count(sb, gdp), x);
+ i, ext4_free_group_clusters(sb, gdp), x);
bitmap_count += x;
}
brelse(bitmap_bh);
- printk(KERN_DEBUG "ext4_count_free_blocks: stored = %llu"
- ", computed = %llu, %llu\n", ext4_free_blocks_count(es),
+ printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu"
+ ", computed = %llu, %llu\n",
+ EXT4_B2C(sbi, ext4_free_blocks_count(es)),
desc_count, bitmap_count);
return bitmap_count;
#else
@@ -530,7 +574,7 @@
gdp = ext4_get_group_desc(sb, i, NULL);
if (!gdp)
continue;
- desc_count += ext4_free_blks_count(sb, gdp);
+ desc_count += ext4_free_group_clusters(sb, gdp);
}
return desc_count;
@@ -620,6 +664,31 @@
}
+/*
+ * This function returns the number of file system metadata clusters at
+ * the beginning of a block group, including the reserved gdt blocks.
+ */
+unsigned ext4_num_base_meta_clusters(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ unsigned num;
+
+ /* Check for superblock and gdt backups in this group */
+ num = ext4_bg_has_super(sb, block_group);
+
+ if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG) ||
+ block_group < le32_to_cpu(sbi->s_es->s_first_meta_bg) *
+ sbi->s_desc_per_block) {
+ if (num) {
+ num += ext4_bg_num_gdb(sb, block_group);
+ num += le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks);
+ }
+ } else { /* For META_BG_BLOCK_GROUPS */
+ num += ext4_bg_num_gdb(sb, block_group);
+ }
+ return EXT4_NUM_B2C(sbi, num);
+}
/**
* ext4_inode_to_goal_block - return a hint for block allocation
* @inode: inode for block allocation
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index cec3145..5b0e26a 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -144,9 +144,17 @@
#define EXT4_MAP_UNWRITTEN (1 << BH_Unwritten)
#define EXT4_MAP_BOUNDARY (1 << BH_Boundary)
#define EXT4_MAP_UNINIT (1 << BH_Uninit)
+/* Sometimes (in the bigalloc case, from ext4_da_get_block_prep) the caller of
+ * ext4_map_blocks wants to know whether or not the underlying cluster has
+ * already been accounted for. EXT4_MAP_FROM_CLUSTER conveys to the caller that
+ * the requested mapping was from previously mapped (or delayed allocated)
+ * cluster. We use BH_AllocFromCluster only for this flag. BH_AllocFromCluster
+ * should never appear on buffer_head's state flags.
+ */
+#define EXT4_MAP_FROM_CLUSTER (1 << BH_AllocFromCluster)
#define EXT4_MAP_FLAGS (EXT4_MAP_NEW | EXT4_MAP_MAPPED |\
EXT4_MAP_UNWRITTEN | EXT4_MAP_BOUNDARY |\
- EXT4_MAP_UNINIT)
+ EXT4_MAP_UNINIT | EXT4_MAP_FROM_CLUSTER)
struct ext4_map_blocks {
ext4_fsblk_t m_pblk;
@@ -239,8 +247,11 @@
# define EXT4_BLOCK_SIZE(s) (EXT4_MIN_BLOCK_SIZE << (s)->s_log_block_size)
#endif
#define EXT4_ADDR_PER_BLOCK(s) (EXT4_BLOCK_SIZE(s) / sizeof(__u32))
+#define EXT4_CLUSTER_SIZE(s) (EXT4_BLOCK_SIZE(s) << \
+ EXT4_SB(s)->s_cluster_bits)
#ifdef __KERNEL__
# define EXT4_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits)
+# define EXT4_CLUSTER_BITS(s) (EXT4_SB(s)->s_cluster_bits)
#else
# define EXT4_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)
#endif
@@ -258,6 +269,14 @@
#endif
#define EXT4_BLOCK_ALIGN(size, blkbits) ALIGN((size), (1 << (blkbits)))
+/* Translate a block number to a cluster number */
+#define EXT4_B2C(sbi, blk) ((blk) >> (sbi)->s_cluster_bits)
+/* Translate a cluster number to a block number */
+#define EXT4_C2B(sbi, cluster) ((cluster) << (sbi)->s_cluster_bits)
+/* Translate # of blks to # of clusters */
+#define EXT4_NUM_B2C(sbi, blks) (((blks) + (sbi)->s_cluster_ratio - 1) >> \
+ (sbi)->s_cluster_bits)
+
/*
* Structure of a blocks group descriptor
*/
@@ -289,7 +308,7 @@
struct flex_groups {
atomic_t free_inodes;
- atomic_t free_blocks;
+ atomic_t free_clusters;
atomic_t used_dirs;
};
@@ -306,6 +325,7 @@
#define EXT4_DESC_SIZE(s) (EXT4_SB(s)->s_desc_size)
#ifdef __KERNEL__
# define EXT4_BLOCKS_PER_GROUP(s) (EXT4_SB(s)->s_blocks_per_group)
+# define EXT4_CLUSTERS_PER_GROUP(s) (EXT4_SB(s)->s_clusters_per_group)
# define EXT4_DESC_PER_BLOCK(s) (EXT4_SB(s)->s_desc_per_block)
# define EXT4_INODES_PER_GROUP(s) (EXT4_SB(s)->s_inodes_per_group)
# define EXT4_DESC_PER_BLOCK_BITS(s) (EXT4_SB(s)->s_desc_per_block_bits)
@@ -358,8 +378,7 @@
/* Flags that should be inherited by new inodes from their parent. */
#define EXT4_FL_INHERITED (EXT4_SECRM_FL | EXT4_UNRM_FL | EXT4_COMPR_FL |\
- EXT4_SYNC_FL | EXT4_IMMUTABLE_FL | EXT4_APPEND_FL |\
- EXT4_NODUMP_FL | EXT4_NOATIME_FL |\
+ EXT4_SYNC_FL | EXT4_NODUMP_FL | EXT4_NOATIME_FL |\
EXT4_NOCOMPR_FL | EXT4_JOURNAL_DATA_FL |\
EXT4_NOTAIL_FL | EXT4_DIRSYNC_FL)
@@ -520,6 +539,8 @@
#define EXT4_GET_BLOCKS_PUNCH_OUT_EXT 0x0020
/* Don't normalize allocation size (used for fallocate) */
#define EXT4_GET_BLOCKS_NO_NORMALIZE 0x0040
+ /* Request will not result in inode size update (user for fallocate) */
+#define EXT4_GET_BLOCKS_KEEP_SIZE 0x0080
/*
* Flags used by ext4_free_blocks
@@ -528,6 +549,13 @@
#define EXT4_FREE_BLOCKS_FORGET 0x0002
#define EXT4_FREE_BLOCKS_VALIDATED 0x0004
#define EXT4_FREE_BLOCKS_NO_QUOT_UPDATE 0x0008
+#define EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER 0x0010
+#define EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER 0x0020
+
+/*
+ * Flags used by ext4_discard_partial_page_buffers
+ */
+#define EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED 0x0001
/*
* ioctl commands
@@ -538,9 +566,6 @@
#define EXT4_IOC_SETVERSION _IOW('f', 4, long)
#define EXT4_IOC_GETVERSION_OLD FS_IOC_GETVERSION
#define EXT4_IOC_SETVERSION_OLD FS_IOC_SETVERSION
-#ifdef CONFIG_JBD2_DEBUG
-#define EXT4_IOC_WAIT_FOR_READONLY _IOR('f', 99, long)
-#endif
#define EXT4_IOC_GETRSVSZ _IOR('f', 5, long)
#define EXT4_IOC_SETRSVSZ _IOW('f', 6, long)
#define EXT4_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long)
@@ -563,9 +588,6 @@
#define EXT4_IOC32_SETRSVSZ _IOW('f', 6, int)
#define EXT4_IOC32_GROUP_EXTEND _IOW('f', 7, unsigned int)
#define EXT4_IOC32_GROUP_ADD _IOW('f', 8, struct compat_ext4_new_group_input)
-#ifdef CONFIG_JBD2_DEBUG
-#define EXT4_IOC32_WAIT_FOR_READONLY _IOR('f', 99, int)
-#endif
#define EXT4_IOC32_GETVERSION_OLD FS_IOC32_GETVERSION
#define EXT4_IOC32_SETVERSION_OLD FS_IOC32_SETVERSION
#endif
@@ -837,6 +859,7 @@
ext4_group_t i_last_alloc_group;
/* allocation reservation info for delalloc */
+ /* In case of bigalloc, these refer to clusters rather than blocks */
unsigned int i_reserved_data_blocks;
unsigned int i_reserved_meta_blocks;
unsigned int i_allocated_meta_blocks;
@@ -886,7 +909,6 @@
/*
* Mount flags
*/
-#define EXT4_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */
#define EXT4_MOUNT_GRPID 0x00004 /* Create files with directory's group */
#define EXT4_MOUNT_DEBUG 0x00008 /* Some debugging messages */
#define EXT4_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */
@@ -918,6 +940,9 @@
#define EXT4_MOUNT_DISCARD 0x40000000 /* Issue DISCARD requests */
#define EXT4_MOUNT_INIT_INODE_TABLE 0x80000000 /* Initialize uninitialized itables */
+#define EXT4_MOUNT2_EXPLICIT_DELALLOC 0x00000001 /* User explicitly
+ specified delalloc */
+
#define clear_opt(sb, opt) EXT4_SB(sb)->s_mount_opt &= \
~EXT4_MOUNT_##opt
#define set_opt(sb, opt) EXT4_SB(sb)->s_mount_opt |= \
@@ -968,9 +993,9 @@
/*10*/ __le32 s_free_inodes_count; /* Free inodes count */
__le32 s_first_data_block; /* First Data Block */
__le32 s_log_block_size; /* Block size */
- __le32 s_obso_log_frag_size; /* Obsoleted fragment size */
+ __le32 s_log_cluster_size; /* Allocation cluster size */
/*20*/ __le32 s_blocks_per_group; /* # Blocks per group */
- __le32 s_obso_frags_per_group; /* Obsoleted fragments per group */
+ __le32 s_clusters_per_group; /* # Clusters per group */
__le32 s_inodes_per_group; /* # Inodes per group */
__le32 s_mtime; /* Mount time */
/*30*/ __le32 s_wtime; /* Write time */
@@ -1066,7 +1091,10 @@
__u8 s_last_error_func[32]; /* function where the error happened */
#define EXT4_S_ERR_END offsetof(struct ext4_super_block, s_mount_opts)
__u8 s_mount_opts[64];
- __le32 s_reserved[112]; /* Padding to the end of the block */
+ __le32 s_usr_quota_inum; /* inode for tracking user quota */
+ __le32 s_grp_quota_inum; /* inode for tracking group quota */
+ __le32 s_overhead_clusters; /* overhead blocks/clusters in fs */
+ __le32 s_reserved[109]; /* Padding to the end of the block */
};
#define EXT4_S_ERR_LEN (EXT4_S_ERR_END - EXT4_S_ERR_START)
@@ -1086,6 +1114,7 @@
unsigned long s_desc_size; /* Size of a group descriptor in bytes */
unsigned long s_inodes_per_block;/* Number of inodes per block */
unsigned long s_blocks_per_group;/* Number of blocks in a group */
+ unsigned long s_clusters_per_group; /* Number of clusters in a group */
unsigned long s_inodes_per_group;/* Number of inodes in a group */
unsigned long s_itb_per_group; /* Number of inode table blocks per group */
unsigned long s_gdb_count; /* Number of group descriptor blocks */
@@ -1094,6 +1123,8 @@
ext4_group_t s_blockfile_groups;/* Groups acceptable for non-extent files */
unsigned long s_overhead_last; /* Last calculated overhead */
unsigned long s_blocks_last; /* Last seen block count */
+ unsigned int s_cluster_ratio; /* Number of blocks per cluster */
+ unsigned int s_cluster_bits; /* log2 of s_cluster_ratio */
loff_t s_bitmap_maxbytes; /* max bytes for bitmap files */
struct buffer_head * s_sbh; /* Buffer containing the super block */
struct ext4_super_block *s_es; /* Pointer to the super block in the buffer */
@@ -1117,10 +1148,10 @@
u32 s_hash_seed[4];
int s_def_hash_version;
int s_hash_unsigned; /* 3 if hash should be signed, 0 if not */
- struct percpu_counter s_freeblocks_counter;
+ struct percpu_counter s_freeclusters_counter;
struct percpu_counter s_freeinodes_counter;
struct percpu_counter s_dirs_counter;
- struct percpu_counter s_dirtyblocks_counter;
+ struct percpu_counter s_dirtyclusters_counter;
struct blockgroup_lock *s_blockgroup_lock;
struct proc_dir_entry *s_proc;
struct kobject s_kobj;
@@ -1136,10 +1167,6 @@
u32 s_max_batch_time;
u32 s_min_batch_time;
struct block_device *journal_bdev;
-#ifdef CONFIG_JBD2_DEBUG
- struct timer_list turn_ro_timer; /* For turning read-only (crash simulation) */
- wait_queue_head_t ro_wait_queue; /* For people waiting for the fs to go read-only */
-#endif
#ifdef CONFIG_QUOTA
char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
@@ -1248,6 +1275,15 @@
ino <= le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count));
}
+static inline void ext4_set_io_unwritten_flag(struct inode *inode,
+ struct ext4_io_end *io_end)
+{
+ if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
+ io_end->flag |= EXT4_IO_END_UNWRITTEN;
+ atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
+ }
+}
+
/*
* Inode dynamic state flags
*/
@@ -1360,6 +1396,7 @@
#define EXT4_FEATURE_RO_COMPAT_DIR_NLINK 0x0020
#define EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE 0x0040
#define EXT4_FEATURE_RO_COMPAT_QUOTA 0x0100
+#define EXT4_FEATURE_RO_COMPAT_BIGALLOC 0x0200
#define EXT4_FEATURE_INCOMPAT_COMPRESSION 0x0001
#define EXT4_FEATURE_INCOMPAT_FILETYPE 0x0002
@@ -1402,7 +1439,8 @@
EXT4_FEATURE_RO_COMPAT_DIR_NLINK | \
EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE | \
EXT4_FEATURE_RO_COMPAT_BTREE_DIR |\
- EXT4_FEATURE_RO_COMPAT_HUGE_FILE)
+ EXT4_FEATURE_RO_COMPAT_HUGE_FILE |\
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)
/*
* Default values for user and/or group using reserved blocks
@@ -1735,9 +1773,9 @@
unsigned int flags,
unsigned long *count,
int *errp);
-extern int ext4_claim_free_blocks(struct ext4_sb_info *sbi,
- s64 nblocks, unsigned int flags);
-extern ext4_fsblk_t ext4_count_free_blocks(struct super_block *);
+extern int ext4_claim_free_clusters(struct ext4_sb_info *sbi,
+ s64 nclusters, unsigned int flags);
+extern ext4_fsblk_t ext4_count_free_clusters(struct super_block *);
extern void ext4_check_blocks_bitmap(struct super_block *);
extern struct ext4_group_desc * ext4_get_group_desc(struct super_block * sb,
ext4_group_t block_group,
@@ -1745,12 +1783,18 @@
extern int ext4_should_retry_alloc(struct super_block *sb, int *retries);
struct buffer_head *ext4_read_block_bitmap(struct super_block *sb,
ext4_group_t block_group);
-extern unsigned ext4_init_block_bitmap(struct super_block *sb,
- struct buffer_head *bh,
- ext4_group_t group,
- struct ext4_group_desc *desc);
-#define ext4_free_blocks_after_init(sb, group, desc) \
- ext4_init_block_bitmap(sb, NULL, group, desc)
+extern void ext4_init_block_bitmap(struct super_block *sb,
+ struct buffer_head *bh,
+ ext4_group_t group,
+ struct ext4_group_desc *desc);
+extern unsigned ext4_free_clusters_after_init(struct super_block *sb,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp);
+extern unsigned ext4_num_base_meta_clusters(struct super_block *sb,
+ ext4_group_t block_group);
+extern unsigned ext4_num_overhead_clusters(struct super_block *sb,
+ ext4_group_t block_group,
+ struct ext4_group_desc *gdp);
ext4_fsblk_t ext4_inode_to_goal_block(struct inode *);
/* dir.c */
@@ -1776,7 +1820,8 @@
/* ialloc.c */
extern struct inode *ext4_new_inode(handle_t *, struct inode *, int,
- const struct qstr *qstr, __u32 goal);
+ const struct qstr *qstr, __u32 goal,
+ uid_t *owner);
extern void ext4_free_inode(handle_t *, struct inode *);
extern struct inode * ext4_orphan_get(struct super_block *, unsigned long);
extern unsigned long ext4_count_free_inodes(struct super_block *);
@@ -1839,6 +1884,12 @@
struct address_space *mapping, loff_t from);
extern int ext4_block_zero_page_range(handle_t *handle,
struct address_space *mapping, loff_t from, loff_t length);
+extern int ext4_discard_partial_page_buffers(handle_t *handle,
+ struct address_space *mapping, loff_t from,
+ loff_t length, int flags);
+extern int ext4_discard_partial_page_buffers_no_lock(handle_t *handle,
+ struct inode *inode, struct page *page, loff_t from,
+ loff_t length, int flags);
extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
extern qsize_t *ext4_get_reserved_space(struct inode *inode);
extern void ext4_da_update_reserve_space(struct inode *inode,
@@ -1927,8 +1978,8 @@
struct ext4_group_desc *bg);
extern ext4_fsblk_t ext4_inode_table(struct super_block *sb,
struct ext4_group_desc *bg);
-extern __u32 ext4_free_blks_count(struct super_block *sb,
- struct ext4_group_desc *bg);
+extern __u32 ext4_free_group_clusters(struct super_block *sb,
+ struct ext4_group_desc *bg);
extern __u32 ext4_free_inodes_count(struct super_block *sb,
struct ext4_group_desc *bg);
extern __u32 ext4_used_dirs_count(struct super_block *sb,
@@ -1941,8 +1992,9 @@
struct ext4_group_desc *bg, ext4_fsblk_t blk);
extern void ext4_inode_table_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk);
-extern void ext4_free_blks_set(struct super_block *sb,
- struct ext4_group_desc *bg, __u32 count);
+extern void ext4_free_group_clusters_set(struct super_block *sb,
+ struct ext4_group_desc *bg,
+ __u32 count);
extern void ext4_free_inodes_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count);
extern void ext4_used_dirs_set(struct super_block *sb,
@@ -2051,13 +2103,13 @@
} while (0)
#ifdef CONFIG_SMP
-/* Each CPU can accumulate percpu_counter_batch blocks in their local
- * counters. So we need to make sure we have free blocks more
+/* Each CPU can accumulate percpu_counter_batch clusters in their local
+ * counters. So we need to make sure we have free clusters more
* than percpu_counter_batch * nr_cpu_ids. Also add a window of 4 times.
*/
-#define EXT4_FREEBLOCKS_WATERMARK (4 * (percpu_counter_batch * nr_cpu_ids))
+#define EXT4_FREECLUSTERS_WATERMARK (4 * (percpu_counter_batch * nr_cpu_ids))
#else
-#define EXT4_FREEBLOCKS_WATERMARK 0
+#define EXT4_FREECLUSTERS_WATERMARK 0
#endif
static inline void ext4_update_i_disksize(struct inode *inode, loff_t newsize)
@@ -2243,10 +2295,19 @@
enum ext4_state_bits {
BH_Uninit /* blocks are allocated but uninitialized on disk */
= BH_JBDPrivateStart,
+ BH_AllocFromCluster, /* allocated blocks were part of already
+ * allocated cluster. Note that this flag will
+ * never, ever appear in a buffer_head's state
+ * flag. See EXT4_MAP_FROM_CLUSTER to see where
+ * this is used. */
+ BH_Da_Mapped, /* Delayed allocated block that now has a mapping. This
+ * flag is set when ext4_map_blocks is called on a
+ * delayed allocated block to get its real mapping. */
};
BUFFER_FNS(Uninit, uninit)
TAS_BUFFER_FNS(Uninit, uninit)
+BUFFER_FNS(Da_Mapped, da_mapped)
/*
* Add new method to test wether block and inode bitmaps are properly
@@ -2282,4 +2343,6 @@
#endif /* __KERNEL__ */
+#include "ext4_extents.h"
+
#endif /* _EXT4_H */
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 095c36f..a52db3a 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -290,5 +290,7 @@
struct ext4_ext_path *);
extern void ext4_ext_drop_refs(struct ext4_ext_path *);
extern int ext4_ext_check_inode(struct inode *inode);
+extern int ext4_find_delalloc_cluster(struct inode *inode, ext4_lblk_t lblk,
+ int search_hint_reverse);
#endif /* _EXT4_EXTENTS */
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index f5240aa..aca1790 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -109,9 +109,11 @@
if (ext4_handle_valid(handle)) {
err = jbd2_journal_dirty_metadata(handle, bh);
- if (err)
- ext4_journal_abort_handle(where, line, __func__,
- bh, handle, err);
+ if (err) {
+ /* Errors can only happen if there is a bug */
+ handle->h_err = err;
+ __ext4_journal_stop(where, line, handle);
+ }
} else {
if (inode)
mark_buffer_dirty_inode(bh, inode);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 57cf568..61fa9e1 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -42,7 +42,6 @@
#include <asm/uaccess.h>
#include <linux/fiemap.h>
#include "ext4_jbd2.h"
-#include "ext4_extents.h"
#include <trace/events/ext4.h>
@@ -96,13 +95,17 @@
* - ENOMEM
* - EIO
*/
-static int ext4_ext_dirty(handle_t *handle, struct inode *inode,
- struct ext4_ext_path *path)
+#define ext4_ext_dirty(handle, inode, path) \
+ __ext4_ext_dirty(__func__, __LINE__, (handle), (inode), (path))
+static int __ext4_ext_dirty(const char *where, unsigned int line,
+ handle_t *handle, struct inode *inode,
+ struct ext4_ext_path *path)
{
int err;
if (path->p_bh) {
/* path points to block */
- err = ext4_handle_dirty_metadata(handle, inode, path->p_bh);
+ err = __ext4_handle_dirty_metadata(where, line, handle,
+ inode, path->p_bh);
} else {
/* path points to leaf/index in inode body */
err = ext4_mark_inode_dirty(handle, inode);
@@ -114,11 +117,9 @@
struct ext4_ext_path *path,
ext4_lblk_t block)
{
- int depth;
-
if (path) {
+ int depth = path->p_depth;
struct ext4_extent *ex;
- depth = path->p_depth;
/*
* Try to predict block placement assuming that we are
@@ -180,12 +181,10 @@
size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 6)
- size = 6;
+ if (!check && size > 6)
+ size = 6;
#endif
- }
return size;
}
@@ -195,12 +194,10 @@
size = (inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent_idx);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 5)
- size = 5;
+ if (!check && size > 5)
+ size = 5;
#endif
- }
return size;
}
@@ -211,12 +208,10 @@
size = sizeof(EXT4_I(inode)->i_data);
size -= sizeof(struct ext4_extent_header);
size /= sizeof(struct ext4_extent);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 3)
- size = 3;
+ if (!check && size > 3)
+ size = 3;
#endif
- }
return size;
}
@@ -227,12 +222,10 @@
size = sizeof(EXT4_I(inode)->i_data);
size -= sizeof(struct ext4_extent_header);
size /= sizeof(struct ext4_extent_idx);
- if (!check) {
#ifdef AGGRESSIVE_TEST
- if (size > 4)
- size = 4;
+ if (!check && size > 4)
+ size = 4;
#endif
- }
return size;
}
@@ -244,7 +237,7 @@
int ext4_ext_calc_metadata_amount(struct inode *inode, ext4_lblk_t lblock)
{
struct ext4_inode_info *ei = EXT4_I(inode);
- int idxs, num = 0;
+ int idxs;
idxs = ((inode->i_sb->s_blocksize - sizeof(struct ext4_extent_header))
/ sizeof(struct ext4_extent_idx));
@@ -259,6 +252,8 @@
*/
if (ei->i_da_metadata_calc_len &&
ei->i_da_metadata_calc_last_lblock+1 == lblock) {
+ int num = 0;
+
if ((ei->i_da_metadata_calc_len % idxs) == 0)
num++;
if ((ei->i_da_metadata_calc_len % (idxs*idxs)) == 0)
@@ -321,8 +316,6 @@
struct ext4_extent_header *eh,
int depth)
{
- struct ext4_extent *ext;
- struct ext4_extent_idx *ext_idx;
unsigned short entries;
if (eh->eh_entries == 0)
return 1;
@@ -331,7 +324,7 @@
if (depth == 0) {
/* leaf entries */
- ext = EXT_FIRST_EXTENT(eh);
+ struct ext4_extent *ext = EXT_FIRST_EXTENT(eh);
while (entries) {
if (!ext4_valid_extent(inode, ext))
return 0;
@@ -339,7 +332,7 @@
entries--;
}
} else {
- ext_idx = EXT_FIRST_INDEX(eh);
+ struct ext4_extent_idx *ext_idx = EXT_FIRST_INDEX(eh);
while (entries) {
if (!ext4_valid_extent_idx(inode, ext_idx))
return 0;
@@ -751,31 +744,30 @@
return -EIO;
}
- len = EXT_MAX_INDEX(curp->p_hdr) - curp->p_idx;
if (logical > le32_to_cpu(curp->p_idx->ei_block)) {
/* insert after */
- if (curp->p_idx != EXT_LAST_INDEX(curp->p_hdr)) {
- len = (len - 1) * sizeof(struct ext4_extent_idx);
- len = len < 0 ? 0 : len;
- ext_debug("insert new index %d after: %llu. "
- "move %d from 0x%p to 0x%p\n",
- logical, ptr, len,
- (curp->p_idx + 1), (curp->p_idx + 2));
- memmove(curp->p_idx + 2, curp->p_idx + 1, len);
- }
+ ext_debug("insert new index %d after: %llu\n", logical, ptr);
ix = curp->p_idx + 1;
} else {
/* insert before */
- len = len * sizeof(struct ext4_extent_idx);
- len = len < 0 ? 0 : len;
- ext_debug("insert new index %d before: %llu. "
- "move %d from 0x%p to 0x%p\n",
- logical, ptr, len,
- curp->p_idx, (curp->p_idx + 1));
- memmove(curp->p_idx + 1, curp->p_idx, len);
+ ext_debug("insert new index %d before: %llu\n", logical, ptr);
ix = curp->p_idx;
}
+ len = EXT_LAST_INDEX(curp->p_hdr) - ix + 1;
+ BUG_ON(len < 0);
+ if (len > 0) {
+ ext_debug("insert new index %d: "
+ "move %d indices from 0x%p to 0x%p\n",
+ logical, len, ix, ix + 1);
+ memmove(ix + 1, ix, len * sizeof(struct ext4_extent_idx));
+ }
+
+ if (unlikely(ix > EXT_MAX_INDEX(curp->p_hdr))) {
+ EXT4_ERROR_INODE(inode, "ix > EXT_MAX_INDEX!");
+ return -EIO;
+ }
+
ix->ei_block = cpu_to_le32(logical);
ext4_idx_store_pblock(ix, ptr);
le16_add_cpu(&curp->p_hdr->eh_entries, 1);
@@ -1042,16 +1034,14 @@
*/
static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode,
unsigned int flags,
- struct ext4_ext_path *path,
struct ext4_extent *newext)
{
- struct ext4_ext_path *curp = path;
struct ext4_extent_header *neh;
struct buffer_head *bh;
ext4_fsblk_t newblock;
int err = 0;
- newblock = ext4_ext_new_meta_block(handle, inode, path,
+ newblock = ext4_ext_new_meta_block(handle, inode, NULL,
newext, &err, flags);
if (newblock == 0)
return err;
@@ -1071,7 +1061,8 @@
}
/* move top-level index/leaf into new block */
- memmove(bh->b_data, curp->p_hdr, sizeof(EXT4_I(inode)->i_data));
+ memmove(bh->b_data, EXT4_I(inode)->i_data,
+ sizeof(EXT4_I(inode)->i_data));
/* set size of new block */
neh = ext_block_hdr(bh);
@@ -1089,32 +1080,23 @@
if (err)
goto out;
- /* create index in new top-level index: num,max,pointer */
- err = ext4_ext_get_access(handle, inode, curp);
- if (err)
- goto out;
-
- curp->p_hdr->eh_magic = EXT4_EXT_MAGIC;
- curp->p_hdr->eh_max = cpu_to_le16(ext4_ext_space_root_idx(inode, 0));
- curp->p_hdr->eh_entries = cpu_to_le16(1);
- curp->p_idx = EXT_FIRST_INDEX(curp->p_hdr);
-
- if (path[0].p_hdr->eh_depth)
- curp->p_idx->ei_block =
- EXT_FIRST_INDEX(path[0].p_hdr)->ei_block;
- else
- curp->p_idx->ei_block =
- EXT_FIRST_EXTENT(path[0].p_hdr)->ee_block;
- ext4_idx_store_pblock(curp->p_idx, newblock);
-
+ /* Update top-level index: num,max,pointer */
neh = ext_inode_hdr(inode);
+ neh->eh_entries = cpu_to_le16(1);
+ ext4_idx_store_pblock(EXT_FIRST_INDEX(neh), newblock);
+ if (neh->eh_depth == 0) {
+ /* Root extent block becomes index block */
+ neh->eh_max = cpu_to_le16(ext4_ext_space_root_idx(inode, 0));
+ EXT_FIRST_INDEX(neh)->ei_block =
+ EXT_FIRST_EXTENT(neh)->ee_block;
+ }
ext_debug("new root: num %d(%d), lblock %d, ptr %llu\n",
le16_to_cpu(neh->eh_entries), le16_to_cpu(neh->eh_max),
le32_to_cpu(EXT_FIRST_INDEX(neh)->ei_block),
ext4_idx_pblock(EXT_FIRST_INDEX(neh)));
- neh->eh_depth = cpu_to_le16(path->p_depth + 1);
- err = ext4_ext_dirty(handle, inode, curp);
+ neh->eh_depth = cpu_to_le16(neh->eh_depth + 1);
+ ext4_mark_inode_dirty(handle, inode);
out:
brelse(bh);
@@ -1162,8 +1144,7 @@
err = PTR_ERR(path);
} else {
/* tree is full, time to grow in depth */
- err = ext4_ext_grow_indepth(handle, inode, flags,
- path, newext);
+ err = ext4_ext_grow_indepth(handle, inode, flags, newext);
if (err)
goto out;
@@ -1235,9 +1216,9 @@
if (unlikely(ix != EXT_FIRST_INDEX(path[depth].p_hdr))) {
EXT4_ERROR_INODE(inode,
"ix (%d) != EXT_FIRST_INDEX (%d) (depth %d)!",
- ix != NULL ? ix->ei_block : 0,
+ ix != NULL ? le32_to_cpu(ix->ei_block) : 0,
EXT_FIRST_INDEX(path[depth].p_hdr) != NULL ?
- EXT_FIRST_INDEX(path[depth].p_hdr)->ei_block : 0,
+ le32_to_cpu(EXT_FIRST_INDEX(path[depth].p_hdr)->ei_block) : 0,
depth);
return -EIO;
}
@@ -1260,13 +1241,14 @@
/*
* search the closest allocated block to the right for *logical
* and returns it at @logical + it's physical address at @phys
- * if *logical is the smallest allocated block, the function
+ * if *logical is the largest allocated block, the function
* returns 0 at @phys
* return value contains 0 (success) or error code
*/
static int ext4_ext_search_right(struct inode *inode,
struct ext4_ext_path *path,
- ext4_lblk_t *logical, ext4_fsblk_t *phys)
+ ext4_lblk_t *logical, ext4_fsblk_t *phys,
+ struct ext4_extent **ret_ex)
{
struct buffer_head *bh = NULL;
struct ext4_extent_header *eh;
@@ -1308,9 +1290,7 @@
return -EIO;
}
}
- *logical = le32_to_cpu(ex->ee_block);
- *phys = ext4_ext_pblock(ex);
- return 0;
+ goto found_extent;
}
if (unlikely(*logical < (le32_to_cpu(ex->ee_block) + ee_len))) {
@@ -1323,9 +1303,7 @@
if (ex != EXT_LAST_EXTENT(path[depth].p_hdr)) {
/* next allocated block in this leaf */
ex++;
- *logical = le32_to_cpu(ex->ee_block);
- *phys = ext4_ext_pblock(ex);
- return 0;
+ goto found_extent;
}
/* go up and search for index to the right */
@@ -1368,9 +1346,12 @@
return -EIO;
}
ex = EXT_FIRST_EXTENT(eh);
+found_extent:
*logical = le32_to_cpu(ex->ee_block);
*phys = ext4_ext_pblock(ex);
- put_bh(bh);
+ *ret_ex = ex;
+ if (bh)
+ put_bh(bh);
return 0;
}
@@ -1395,7 +1376,8 @@
while (depth >= 0) {
if (depth == path->p_depth) {
/* leaf */
- if (path[depth].p_ext !=
+ if (path[depth].p_ext &&
+ path[depth].p_ext !=
EXT_LAST_EXTENT(path[depth].p_hdr))
return le32_to_cpu(path[depth].p_ext[1].ee_block);
} else {
@@ -1623,7 +1605,8 @@
* such that there will be no overlap, and then returns 1.
* If there is no overlap found, it returns 0.
*/
-static unsigned int ext4_ext_check_overlap(struct inode *inode,
+static unsigned int ext4_ext_check_overlap(struct ext4_sb_info *sbi,
+ struct inode *inode,
struct ext4_extent *newext,
struct ext4_ext_path *path)
{
@@ -1637,6 +1620,7 @@
if (!path[depth].p_ext)
goto out;
b2 = le32_to_cpu(path[depth].p_ext->ee_block);
+ b2 &= ~(sbi->s_cluster_ratio - 1);
/*
* get the next allocated block if the extent in the path
@@ -1646,6 +1630,7 @@
b2 = ext4_ext_next_allocated_block(path);
if (b2 == EXT_MAX_BLOCKS)
goto out;
+ b2 &= ~(sbi->s_cluster_ratio - 1);
}
/* check for wrap through zero on extent logical start block*/
@@ -1697,7 +1682,7 @@
/* try to insert block into found extent and return */
if (ex && !(flag & EXT4_GET_BLOCKS_PRE_IO)
&& ext4_can_extents_be_merged(inode, ex, newext)) {
- ext_debug("append [%d]%d block to %d:[%d]%d (from %llu)\n",
+ ext_debug("append [%d]%d block to %u:[%d]%d (from %llu)\n",
ext4_ext_is_uninitialized(newext),
ext4_ext_get_actual_len(newext),
le32_to_cpu(ex->ee_block),
@@ -1735,7 +1720,7 @@
if (le32_to_cpu(newext->ee_block) > le32_to_cpu(fex->ee_block))
next = ext4_ext_next_leaf_block(path);
if (next != EXT_MAX_BLOCKS) {
- ext_debug("next leaf block - %d\n", next);
+ ext_debug("next leaf block - %u\n", next);
BUG_ON(npath != NULL);
npath = ext4_ext_find_extent(inode, next, NULL);
if (IS_ERR(npath))
@@ -1773,46 +1758,51 @@
if (!nearex) {
/* there is no extent in this leaf, create first one */
- ext_debug("first extent in the leaf: %d:%llu:[%d]%d\n",
+ ext_debug("first extent in the leaf: %u:%llu:[%d]%d\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_uninitialized(newext),
ext4_ext_get_actual_len(newext));
- path[depth].p_ext = EXT_FIRST_EXTENT(eh);
- } else if (le32_to_cpu(newext->ee_block)
+ nearex = EXT_FIRST_EXTENT(eh);
+ } else {
+ if (le32_to_cpu(newext->ee_block)
> le32_to_cpu(nearex->ee_block)) {
-/* BUG_ON(newext->ee_block == nearex->ee_block); */
- if (nearex != EXT_LAST_EXTENT(eh)) {
- len = EXT_MAX_EXTENT(eh) - nearex;
- len = (len - 1) * sizeof(struct ext4_extent);
- len = len < 0 ? 0 : len;
- ext_debug("insert %d:%llu:[%d]%d after: nearest 0x%p, "
- "move %d from 0x%p to 0x%p\n",
+ /* Insert after */
+ ext_debug("insert %u:%llu:[%d]%d before: "
+ "nearest %p\n",
le32_to_cpu(newext->ee_block),
ext4_ext_pblock(newext),
ext4_ext_is_uninitialized(newext),
ext4_ext_get_actual_len(newext),
- nearex, len, nearex + 1, nearex + 2);
- memmove(nearex + 2, nearex + 1, len);
+ nearex);
+ nearex++;
+ } else {
+ /* Insert before */
+ BUG_ON(newext->ee_block == nearex->ee_block);
+ ext_debug("insert %u:%llu:[%d]%d after: "
+ "nearest %p\n",
+ le32_to_cpu(newext->ee_block),
+ ext4_ext_pblock(newext),
+ ext4_ext_is_uninitialized(newext),
+ ext4_ext_get_actual_len(newext),
+ nearex);
}
- path[depth].p_ext = nearex + 1;
- } else {
- BUG_ON(newext->ee_block == nearex->ee_block);
- len = (EXT_MAX_EXTENT(eh) - nearex) * sizeof(struct ext4_extent);
- len = len < 0 ? 0 : len;
- ext_debug("insert %d:%llu:[%d]%d before: nearest 0x%p, "
- "move %d from 0x%p to 0x%p\n",
- le32_to_cpu(newext->ee_block),
- ext4_ext_pblock(newext),
- ext4_ext_is_uninitialized(newext),
- ext4_ext_get_actual_len(newext),
- nearex, len, nearex, nearex + 1);
- memmove(nearex + 1, nearex, len);
- path[depth].p_ext = nearex;
+ len = EXT_LAST_EXTENT(eh) - nearex + 1;
+ if (len > 0) {
+ ext_debug("insert %u:%llu:[%d]%d: "
+ "move %d extents from 0x%p to 0x%p\n",
+ le32_to_cpu(newext->ee_block),
+ ext4_ext_pblock(newext),
+ ext4_ext_is_uninitialized(newext),
+ ext4_ext_get_actual_len(newext),
+ len, nearex, nearex + 1);
+ memmove(nearex + 1, nearex,
+ len * sizeof(struct ext4_extent));
+ }
}
le16_add_cpu(&eh->eh_entries, 1);
- nearex = path[depth].p_ext;
+ path[depth].p_ext = nearex;
nearex->ee_block = newext->ee_block;
ext4_ext_store_pblock(nearex, ext4_ext_pblock(newext));
nearex->ee_len = newext->ee_len;
@@ -1962,6 +1952,7 @@
struct ext4_ext_cache *cex;
BUG_ON(len == 0);
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+ trace_ext4_ext_put_in_cache(inode, block, len, start);
cex = &EXT4_I(inode)->i_cached_extent;
cex->ec_block = block;
cex->ec_len = len;
@@ -2063,6 +2054,7 @@
sbi->extent_cache_misses++;
else
sbi->extent_cache_hits++;
+ trace_ext4_ext_in_cache(inode, block, ret);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
return ret;
}
@@ -2130,6 +2122,8 @@
if (err)
return err;
ext_debug("index is empty, remove it, free block %llu\n", leaf);
+ trace_ext4_ext_rm_idx(inode, leaf);
+
ext4_free_blocks(handle, inode, NULL, leaf, 1,
EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
return err;
@@ -2158,7 +2152,7 @@
* need to account for leaf block credit
*
* bitmaps and block group descriptor blocks
- * and other metadat blocks still need to be
+ * and other metadata blocks still need to be
* accounted.
*/
/* 1 bitmap, 1 block group descriptor */
@@ -2195,14 +2189,40 @@
}
static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
- struct ext4_extent *ex,
- ext4_lblk_t from, ext4_lblk_t to)
+ struct ext4_extent *ex,
+ ext4_fsblk_t *partial_cluster,
+ ext4_lblk_t from, ext4_lblk_t to)
{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
unsigned short ee_len = ext4_ext_get_actual_len(ex);
+ ext4_fsblk_t pblk;
int flags = EXT4_FREE_BLOCKS_FORGET;
if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
flags |= EXT4_FREE_BLOCKS_METADATA;
+ /*
+ * For bigalloc file systems, we never free a partial cluster
+ * at the beginning of the extent. Instead, we make a note
+ * that we tried freeing the cluster, and check to see if we
+ * need to free it on a subsequent call to ext4_remove_blocks,
+ * or at the end of the ext4_truncate() operation.
+ */
+ flags |= EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER;
+
+ trace_ext4_remove_blocks(inode, ex, from, to, *partial_cluster);
+ /*
+ * If we have a partial cluster, and it's different from the
+ * cluster of the last block, we need to explicitly free the
+ * partial cluster here.
+ */
+ pblk = ext4_ext_pblock(ex) + ee_len - 1;
+ if (*partial_cluster && (EXT4_B2C(sbi, pblk) != *partial_cluster)) {
+ ext4_free_blocks(handle, inode, NULL,
+ EXT4_C2B(sbi, *partial_cluster),
+ sbi->s_cluster_ratio, flags);
+ *partial_cluster = 0;
+ }
+
#ifdef EXTENTS_STATS
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
@@ -2222,12 +2242,24 @@
&& to == le32_to_cpu(ex->ee_block) + ee_len - 1) {
/* tail removal */
ext4_lblk_t num;
- ext4_fsblk_t start;
num = le32_to_cpu(ex->ee_block) + ee_len - from;
- start = ext4_ext_pblock(ex) + ee_len - num;
- ext_debug("free last %u blocks starting %llu\n", num, start);
- ext4_free_blocks(handle, inode, NULL, start, num, flags);
+ pblk = ext4_ext_pblock(ex) + ee_len - num;
+ ext_debug("free last %u blocks starting %llu\n", num, pblk);
+ ext4_free_blocks(handle, inode, NULL, pblk, num, flags);
+ /*
+ * If the block range to be freed didn't start at the
+ * beginning of a cluster, and we removed the entire
+ * extent, save the partial cluster here, since we
+ * might need to delete if we determine that the
+ * truncate operation has removed all of the blocks in
+ * the cluster.
+ */
+ if (pblk & (sbi->s_cluster_ratio - 1) &&
+ (ee_len == num))
+ *partial_cluster = EXT4_B2C(sbi, pblk);
+ else
+ *partial_cluster = 0;
} else if (from == le32_to_cpu(ex->ee_block)
&& to <= le32_to_cpu(ex->ee_block) + ee_len - 1) {
/* head removal */
@@ -2238,7 +2270,7 @@
start = ext4_ext_pblock(ex);
ext_debug("free first %u blocks starting %llu\n", num, start);
- ext4_free_blocks(handle, inode, 0, start, num, flags);
+ ext4_free_blocks(handle, inode, NULL, start, num, flags);
} else {
printk(KERN_INFO "strange request: removal(2) "
@@ -2262,19 +2294,19 @@
*/
static int
ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
- struct ext4_ext_path *path, ext4_lblk_t start,
- ext4_lblk_t end)
+ struct ext4_ext_path *path, ext4_fsblk_t *partial_cluster,
+ ext4_lblk_t start, ext4_lblk_t end)
{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int err = 0, correct_index = 0;
int depth = ext_depth(inode), credits;
struct ext4_extent_header *eh;
- ext4_lblk_t a, b, block;
+ ext4_lblk_t a, b;
unsigned num;
ext4_lblk_t ex_ee_block;
unsigned short ex_ee_len;
unsigned uninitialized = 0;
struct ext4_extent *ex;
- struct ext4_map_blocks map;
/* the header must be checked already in ext4_ext_remove_space() */
ext_debug("truncate since %u in leaf\n", start);
@@ -2291,6 +2323,8 @@
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
+ trace_ext4_ext_rm_leaf(inode, start, ex, *partial_cluster);
+
while (ex >= EXT_FIRST_EXTENT(eh) &&
ex_ee_block + ex_ee_len > start) {
@@ -2315,86 +2349,18 @@
ex_ee_block = le32_to_cpu(ex->ee_block);
ex_ee_len = ext4_ext_get_actual_len(ex);
continue;
- } else if (a != ex_ee_block &&
- b != ex_ee_block + ex_ee_len - 1) {
- /*
- * If this is a truncate, then this condition should
- * never happen because at least one of the end points
- * needs to be on the edge of the extent.
- */
- if (end == EXT_MAX_BLOCKS - 1) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- block = 0;
- num = 0;
- err = -EIO;
- goto out;
- }
- /*
- * else this is a hole punch, so the extent needs to
- * be split since neither edge of the hole is on the
- * extent edge
- */
- else{
- map.m_pblk = ext4_ext_pblock(ex);
- map.m_lblk = ex_ee_block;
- map.m_len = b - ex_ee_block;
-
- err = ext4_split_extent(handle,
- inode, path, &map, 0,
- EXT4_GET_BLOCKS_PUNCH_OUT_EXT |
- EXT4_GET_BLOCKS_PRE_IO);
-
- if (err < 0)
- goto out;
-
- ex_ee_len = ext4_ext_get_actual_len(ex);
-
- b = ex_ee_block+ex_ee_len - 1 < end ?
- ex_ee_block+ex_ee_len - 1 : end;
-
- /* Then remove tail of this extent */
- block = ex_ee_block;
- num = a - block;
- }
+ } else if (b != ex_ee_block + ex_ee_len - 1) {
+ EXT4_ERROR_INODE(inode," bad truncate %u:%u\n",
+ start, end);
+ err = -EIO;
+ goto out;
} else if (a != ex_ee_block) {
/* remove tail of the extent */
- block = ex_ee_block;
- num = a - block;
- } else if (b != ex_ee_block + ex_ee_len - 1) {
- /* remove head of the extent */
- block = b;
- num = ex_ee_block + ex_ee_len - b;
-
- /*
- * If this is a truncate, this condition
- * should never happen
- */
- if (end == EXT_MAX_BLOCKS - 1) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- err = -EIO;
- goto out;
- }
+ num = a - ex_ee_block;
} else {
/* remove whole extent: excellent! */
- block = ex_ee_block;
num = 0;
- if (a != ex_ee_block) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- err = -EIO;
- goto out;
- }
-
- if (b != ex_ee_block + ex_ee_len - 1) {
- ext_debug(" bad truncate %u:%u\n",
- start, end);
- err = -EIO;
- goto out;
- }
}
-
/*
* 3 for leaf, sb, and inode plus 2 (bmap and group
* descriptor) for each block group; assume two block
@@ -2416,23 +2382,15 @@
if (err)
goto out;
- err = ext4_remove_blocks(handle, inode, ex, a, b);
+ err = ext4_remove_blocks(handle, inode, ex, partial_cluster,
+ a, b);
if (err)
goto out;
- if (num == 0) {
+ if (num == 0)
/* this extent is removed; mark slot entirely unused */
ext4_ext_store_pblock(ex, 0);
- } else if (block != ex_ee_block) {
- /*
- * If this was a head removal, then we need to update
- * the physical block since it is now at a different
- * location
- */
- ext4_ext_store_pblock(ex, ext4_ext_pblock(ex) + (b-a));
- }
- ex->ee_block = cpu_to_le32(block);
ex->ee_len = cpu_to_le16(num);
/*
* Do not mark uninitialized if all the blocks in the
@@ -2440,11 +2398,6 @@
*/
if (uninitialized && num)
ext4_ext_mark_uninitialized(ex);
-
- err = ext4_ext_dirty(handle, inode, path + depth);
- if (err)
- goto out;
-
/*
* If the extent was completely released,
* we need to remove it from the leaf
@@ -2464,9 +2417,14 @@
sizeof(struct ext4_extent));
}
le16_add_cpu(&eh->eh_entries, -1);
- }
+ } else
+ *partial_cluster = 0;
- ext_debug("new extent: %u:%u:%llu\n", block, num,
+ err = ext4_ext_dirty(handle, inode, path + depth);
+ if (err)
+ goto out;
+
+ ext_debug("new extent: %u:%u:%llu\n", ex_ee_block, num,
ext4_ext_pblock(ex));
ex--;
ex_ee_block = le32_to_cpu(ex->ee_block);
@@ -2476,6 +2434,25 @@
if (correct_index && eh->eh_entries)
err = ext4_ext_correct_indexes(handle, inode, path);
+ /*
+ * If there is still a entry in the leaf node, check to see if
+ * it references the partial cluster. This is the only place
+ * where it could; if it doesn't, we can free the cluster.
+ */
+ if (*partial_cluster && ex >= EXT_FIRST_EXTENT(eh) &&
+ (EXT4_B2C(sbi, ext4_ext_pblock(ex) + ex_ee_len - 1) !=
+ *partial_cluster)) {
+ int flags = EXT4_FREE_BLOCKS_FORGET;
+
+ if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
+ flags |= EXT4_FREE_BLOCKS_METADATA;
+
+ ext4_free_blocks(handle, inode, NULL,
+ EXT4_C2B(sbi, *partial_cluster),
+ sbi->s_cluster_ratio, flags);
+ *partial_cluster = 0;
+ }
+
/* if this leaf is free, then we should
* remove it from index block above */
if (err == 0 && eh->eh_entries == 0 && path[depth].p_bh != NULL)
@@ -2511,6 +2488,7 @@
struct super_block *sb = inode->i_sb;
int depth = ext_depth(inode);
struct ext4_ext_path *path;
+ ext4_fsblk_t partial_cluster = 0;
handle_t *handle;
int i, err;
@@ -2524,6 +2502,8 @@
again:
ext4_ext_invalidate_cache(inode);
+ trace_ext4_ext_remove_space(inode, start, depth);
+
/*
* We start scanning from right side, freeing all the blocks
* after i_size and walking into the tree depth-wise.
@@ -2546,7 +2526,8 @@
if (i == depth) {
/* this is leaf block */
err = ext4_ext_rm_leaf(handle, inode, path,
- start, EXT_MAX_BLOCKS - 1);
+ &partial_cluster, start,
+ EXT_MAX_BLOCKS - 1);
/* root level has p_bh == NULL, brelse() eats this */
brelse(path[i].p_bh);
path[i].p_bh = NULL;
@@ -2618,6 +2599,24 @@
}
}
+ trace_ext4_ext_remove_space_done(inode, start, depth, partial_cluster,
+ path->p_hdr->eh_entries);
+
+ /* If we still have something in the partial cluster and we have removed
+ * even the first extent, then we should free the blocks in the partial
+ * cluster as well. */
+ if (partial_cluster && path->p_hdr->eh_entries == 0) {
+ int flags = EXT4_FREE_BLOCKS_FORGET;
+
+ if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
+ flags |= EXT4_FREE_BLOCKS_METADATA;
+
+ ext4_free_blocks(handle, inode, NULL,
+ EXT4_C2B(EXT4_SB(sb), partial_cluster),
+ EXT4_SB(sb)->s_cluster_ratio, flags);
+ partial_cluster = 0;
+ }
+
/* TODO: flexible tree reduction should be here */
if (path->p_hdr->eh_entries == 0) {
/*
@@ -2909,17 +2908,29 @@
* a> There is no split required: Entire extent should be initialized
* b> Splits in two extents: Write is happening at either end of the extent
* c> Splits in three extents: Somone is writing in middle of the extent
+ *
+ * Pre-conditions:
+ * - The extent pointed to by 'path' is uninitialized.
+ * - The extent pointed to by 'path' contains a superset
+ * of the logical span [map->m_lblk, map->m_lblk + map->m_len).
+ *
+ * Post-conditions on success:
+ * - the returned value is the number of blocks beyond map->l_lblk
+ * that are allocated and initialized.
+ * It is guaranteed to be >= map->m_len.
*/
static int ext4_ext_convert_to_initialized(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
struct ext4_ext_path *path)
{
+ struct ext4_extent_header *eh;
struct ext4_map_blocks split_map;
struct ext4_extent zero_ex;
struct ext4_extent *ex;
ext4_lblk_t ee_block, eof_block;
- unsigned int allocated, ee_len, depth;
+ unsigned int ee_len, depth;
+ int allocated;
int err = 0;
int split_flag = 0;
@@ -2933,11 +2944,93 @@
eof_block = map->m_lblk + map->m_len;
depth = ext_depth(inode);
+ eh = path[depth].p_hdr;
ex = path[depth].p_ext;
ee_block = le32_to_cpu(ex->ee_block);
ee_len = ext4_ext_get_actual_len(ex);
allocated = ee_len - (map->m_lblk - ee_block);
+ trace_ext4_ext_convert_to_initialized_enter(inode, map, ex);
+
+ /* Pre-conditions */
+ BUG_ON(!ext4_ext_is_uninitialized(ex));
+ BUG_ON(!in_range(map->m_lblk, ee_block, ee_len));
+ BUG_ON(map->m_lblk + map->m_len > ee_block + ee_len);
+
+ /*
+ * Attempt to transfer newly initialized blocks from the currently
+ * uninitialized extent to its left neighbor. This is much cheaper
+ * than an insertion followed by a merge as those involve costly
+ * memmove() calls. This is the common case in steady state for
+ * workloads doing fallocate(FALLOC_FL_KEEP_SIZE) followed by append
+ * writes.
+ *
+ * Limitations of the current logic:
+ * - L1: we only deal with writes at the start of the extent.
+ * The approach could be extended to writes at the end
+ * of the extent but this scenario was deemed less common.
+ * - L2: we do not deal with writes covering the whole extent.
+ * This would require removing the extent if the transfer
+ * is possible.
+ * - L3: we only attempt to merge with an extent stored in the
+ * same extent tree node.
+ */
+ if ((map->m_lblk == ee_block) && /*L1*/
+ (map->m_len < ee_len) && /*L2*/
+ (ex > EXT_FIRST_EXTENT(eh))) { /*L3*/
+ struct ext4_extent *prev_ex;
+ ext4_lblk_t prev_lblk;
+ ext4_fsblk_t prev_pblk, ee_pblk;
+ unsigned int prev_len, write_len;
+
+ prev_ex = ex - 1;
+ prev_lblk = le32_to_cpu(prev_ex->ee_block);
+ prev_len = ext4_ext_get_actual_len(prev_ex);
+ prev_pblk = ext4_ext_pblock(prev_ex);
+ ee_pblk = ext4_ext_pblock(ex);
+ write_len = map->m_len;
+
+ /*
+ * A transfer of blocks from 'ex' to 'prev_ex' is allowed
+ * upon those conditions:
+ * - C1: prev_ex is initialized,
+ * - C2: prev_ex is logically abutting ex,
+ * - C3: prev_ex is physically abutting ex,
+ * - C4: prev_ex can receive the additional blocks without
+ * overflowing the (initialized) length limit.
+ */
+ if ((!ext4_ext_is_uninitialized(prev_ex)) && /*C1*/
+ ((prev_lblk + prev_len) == ee_block) && /*C2*/
+ ((prev_pblk + prev_len) == ee_pblk) && /*C3*/
+ (prev_len < (EXT_INIT_MAX_LEN - write_len))) { /*C4*/
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
+
+ trace_ext4_ext_convert_to_initialized_fastpath(inode,
+ map, ex, prev_ex);
+
+ /* Shift the start of ex by 'write_len' blocks */
+ ex->ee_block = cpu_to_le32(ee_block + write_len);
+ ext4_ext_store_pblock(ex, ee_pblk + write_len);
+ ex->ee_len = cpu_to_le16(ee_len - write_len);
+ ext4_ext_mark_uninitialized(ex); /* Restore the flag */
+
+ /* Extend prev_ex by 'write_len' blocks */
+ prev_ex->ee_len = cpu_to_le16(prev_len + write_len);
+
+ /* Mark the block containing both extents as dirty */
+ ext4_ext_dirty(handle, inode, path + depth);
+
+ /* Update path to point to the right extent */
+ path[depth].p_ext = prev_ex;
+
+ /* Result: number of initialized blocks past m_lblk */
+ allocated = write_len;
+ goto out;
+ }
+ }
+
WARN_ON(map->m_lblk < ee_block);
/*
* It is safe to convert extent to initialized via explicit
@@ -3165,6 +3258,192 @@
return ext4_mark_inode_dirty(handle, inode);
}
+/**
+ * ext4_find_delalloc_range: find delayed allocated block in the given range.
+ *
+ * Goes through the buffer heads in the range [lblk_start, lblk_end] and returns
+ * whether there are any buffers marked for delayed allocation. It returns '1'
+ * on the first delalloc'ed buffer head found. If no buffer head in the given
+ * range is marked for delalloc, it returns 0.
+ * lblk_start should always be <= lblk_end.
+ * search_hint_reverse is to indicate that searching in reverse from lblk_end to
+ * lblk_start might be more efficient (i.e., we will likely hit the delalloc'ed
+ * block sooner). This is useful when blocks are truncated sequentially from
+ * lblk_start towards lblk_end.
+ */
+static int ext4_find_delalloc_range(struct inode *inode,
+ ext4_lblk_t lblk_start,
+ ext4_lblk_t lblk_end,
+ int search_hint_reverse)
+{
+ struct address_space *mapping = inode->i_mapping;
+ struct buffer_head *head, *bh = NULL;
+ struct page *page;
+ ext4_lblk_t i, pg_lblk;
+ pgoff_t index;
+
+ /* reverse search wont work if fs block size is less than page size */
+ if (inode->i_blkbits < PAGE_CACHE_SHIFT)
+ search_hint_reverse = 0;
+
+ if (search_hint_reverse)
+ i = lblk_end;
+ else
+ i = lblk_start;
+
+ index = i >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
+
+ while ((i >= lblk_start) && (i <= lblk_end)) {
+ page = find_get_page(mapping, index);
+ if (!page)
+ goto nextpage;
+
+ if (!page_has_buffers(page))
+ goto nextpage;
+
+ head = page_buffers(page);
+ if (!head)
+ goto nextpage;
+
+ bh = head;
+ pg_lblk = index << (PAGE_CACHE_SHIFT -
+ inode->i_blkbits);
+ do {
+ if (unlikely(pg_lblk < lblk_start)) {
+ /*
+ * This is possible when fs block size is less
+ * than page size and our cluster starts/ends in
+ * middle of the page. So we need to skip the
+ * initial few blocks till we reach the 'lblk'
+ */
+ pg_lblk++;
+ continue;
+ }
+
+ /* Check if the buffer is delayed allocated and that it
+ * is not yet mapped. (when da-buffers are mapped during
+ * their writeout, their da_mapped bit is set.)
+ */
+ if (buffer_delay(bh) && !buffer_da_mapped(bh)) {
+ page_cache_release(page);
+ trace_ext4_find_delalloc_range(inode,
+ lblk_start, lblk_end,
+ search_hint_reverse,
+ 1, i);
+ return 1;
+ }
+ if (search_hint_reverse)
+ i--;
+ else
+ i++;
+ } while ((i >= lblk_start) && (i <= lblk_end) &&
+ ((bh = bh->b_this_page) != head));
+nextpage:
+ if (page)
+ page_cache_release(page);
+ /*
+ * Move to next page. 'i' will be the first lblk in the next
+ * page.
+ */
+ if (search_hint_reverse)
+ index--;
+ else
+ index++;
+ i = index << (PAGE_CACHE_SHIFT - inode->i_blkbits);
+ }
+
+ trace_ext4_find_delalloc_range(inode, lblk_start, lblk_end,
+ search_hint_reverse, 0, 0);
+ return 0;
+}
+
+int ext4_find_delalloc_cluster(struct inode *inode, ext4_lblk_t lblk,
+ int search_hint_reverse)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ ext4_lblk_t lblk_start, lblk_end;
+ lblk_start = lblk & (~(sbi->s_cluster_ratio - 1));
+ lblk_end = lblk_start + sbi->s_cluster_ratio - 1;
+
+ return ext4_find_delalloc_range(inode, lblk_start, lblk_end,
+ search_hint_reverse);
+}
+
+/**
+ * Determines how many complete clusters (out of those specified by the 'map')
+ * are under delalloc and were reserved quota for.
+ * This function is called when we are writing out the blocks that were
+ * originally written with their allocation delayed, but then the space was
+ * allocated using fallocate() before the delayed allocation could be resolved.
+ * The cases to look for are:
+ * ('=' indicated delayed allocated blocks
+ * '-' indicates non-delayed allocated blocks)
+ * (a) partial clusters towards beginning and/or end outside of allocated range
+ * are not delalloc'ed.
+ * Ex:
+ * |----c---=|====c====|====c====|===-c----|
+ * |++++++ allocated ++++++|
+ * ==> 4 complete clusters in above example
+ *
+ * (b) partial cluster (outside of allocated range) towards either end is
+ * marked for delayed allocation. In this case, we will exclude that
+ * cluster.
+ * Ex:
+ * |----====c========|========c========|
+ * |++++++ allocated ++++++|
+ * ==> 1 complete clusters in above example
+ *
+ * Ex:
+ * |================c================|
+ * |++++++ allocated ++++++|
+ * ==> 0 complete clusters in above example
+ *
+ * The ext4_da_update_reserve_space will be called only if we
+ * determine here that there were some "entire" clusters that span
+ * this 'allocated' range.
+ * In the non-bigalloc case, this function will just end up returning num_blks
+ * without ever calling ext4_find_delalloc_range.
+ */
+static unsigned int
+get_reserved_cluster_alloc(struct inode *inode, ext4_lblk_t lblk_start,
+ unsigned int num_blks)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ ext4_lblk_t alloc_cluster_start, alloc_cluster_end;
+ ext4_lblk_t lblk_from, lblk_to, c_offset;
+ unsigned int allocated_clusters = 0;
+
+ alloc_cluster_start = EXT4_B2C(sbi, lblk_start);
+ alloc_cluster_end = EXT4_B2C(sbi, lblk_start + num_blks - 1);
+
+ /* max possible clusters for this allocation */
+ allocated_clusters = alloc_cluster_end - alloc_cluster_start + 1;
+
+ trace_ext4_get_reserved_cluster_alloc(inode, lblk_start, num_blks);
+
+ /* Check towards left side */
+ c_offset = lblk_start & (sbi->s_cluster_ratio - 1);
+ if (c_offset) {
+ lblk_from = lblk_start & (~(sbi->s_cluster_ratio - 1));
+ lblk_to = lblk_from + c_offset - 1;
+
+ if (ext4_find_delalloc_range(inode, lblk_from, lblk_to, 0))
+ allocated_clusters--;
+ }
+
+ /* Now check towards right. */
+ c_offset = (lblk_start + num_blks) & (sbi->s_cluster_ratio - 1);
+ if (allocated_clusters && c_offset) {
+ lblk_from = lblk_start + num_blks;
+ lblk_to = lblk_from + (sbi->s_cluster_ratio - c_offset) - 1;
+
+ if (ext4_find_delalloc_range(inode, lblk_from, lblk_to, 0))
+ allocated_clusters--;
+ }
+
+ return allocated_clusters;
+}
+
static int
ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map,
@@ -3181,6 +3460,9 @@
flags, allocated);
ext4_ext_show_leaf(inode, path);
+ trace_ext4_ext_handle_uninitialized_extents(inode, map, allocated,
+ newblock);
+
/* get_block() before submit the IO, split the extent */
if ((flags & EXT4_GET_BLOCKS_PRE_IO)) {
ret = ext4_split_unwritten_extents(handle, inode, map,
@@ -3190,10 +3472,9 @@
* that this IO needs to conversion to written when IO is
* completed
*/
- if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
- io->flag = EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- } else
+ if (io)
+ ext4_set_io_unwritten_flag(inode, io);
+ else
ext4_set_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN);
if (ext4_should_dioread_nolock(inode))
map->m_flags |= EXT4_MAP_UNINIT;
@@ -3234,14 +3515,8 @@
/* buffered write, writepage time, convert*/
ret = ext4_ext_convert_to_initialized(handle, inode, map, path);
- if (ret >= 0) {
+ if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
- err = check_eofblocks_fl(handle, inode, map->m_lblk, path,
- map->m_len);
- if (err < 0)
- goto out2;
- }
-
out:
if (ret <= 0) {
err = ret;
@@ -3270,11 +3545,24 @@
* But fallocate would have already updated quota and block
* count for this offset. So cancel these reservation
*/
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
- ext4_da_update_reserve_space(inode, allocated, 0);
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
+ unsigned int reserved_clusters;
+ reserved_clusters = get_reserved_cluster_alloc(inode,
+ map->m_lblk, map->m_len);
+ if (reserved_clusters)
+ ext4_da_update_reserve_space(inode,
+ reserved_clusters,
+ 0);
+ }
map_out:
map->m_flags |= EXT4_MAP_MAPPED;
+ if ((flags & EXT4_GET_BLOCKS_KEEP_SIZE) == 0) {
+ err = check_eofblocks_fl(handle, inode, map->m_lblk, path,
+ map->m_len);
+ if (err < 0)
+ goto out2;
+ }
out1:
if (allocated > map->m_len)
allocated = map->m_len;
@@ -3290,6 +3578,111 @@
}
/*
+ * get_implied_cluster_alloc - check to see if the requested
+ * allocation (in the map structure) overlaps with a cluster already
+ * allocated in an extent.
+ * @sb The filesystem superblock structure
+ * @map The requested lblk->pblk mapping
+ * @ex The extent structure which might contain an implied
+ * cluster allocation
+ *
+ * This function is called by ext4_ext_map_blocks() after we failed to
+ * find blocks that were already in the inode's extent tree. Hence,
+ * we know that the beginning of the requested region cannot overlap
+ * the extent from the inode's extent tree. There are three cases we
+ * want to catch. The first is this case:
+ *
+ * |--- cluster # N--|
+ * |--- extent ---| |---- requested region ---|
+ * |==========|
+ *
+ * The second case that we need to test for is this one:
+ *
+ * |--------- cluster # N ----------------|
+ * |--- requested region --| |------- extent ----|
+ * |=======================|
+ *
+ * The third case is when the requested region lies between two extents
+ * within the same cluster:
+ * |------------- cluster # N-------------|
+ * |----- ex -----| |---- ex_right ----|
+ * |------ requested region ------|
+ * |================|
+ *
+ * In each of the above cases, we need to set the map->m_pblk and
+ * map->m_len so it corresponds to the return the extent labelled as
+ * "|====|" from cluster #N, since it is already in use for data in
+ * cluster EXT4_B2C(sbi, map->m_lblk). We will then return 1 to
+ * signal to ext4_ext_map_blocks() that map->m_pblk should be treated
+ * as a new "allocated" block region. Otherwise, we will return 0 and
+ * ext4_ext_map_blocks() will then allocate one or more new clusters
+ * by calling ext4_mb_new_blocks().
+ */
+static int get_implied_cluster_alloc(struct super_block *sb,
+ struct ext4_map_blocks *map,
+ struct ext4_extent *ex,
+ struct ext4_ext_path *path)
+{
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ ext4_lblk_t c_offset = map->m_lblk & (sbi->s_cluster_ratio-1);
+ ext4_lblk_t ex_cluster_start, ex_cluster_end;
+ ext4_lblk_t rr_cluster_start, rr_cluster_end;
+ ext4_lblk_t ee_block = le32_to_cpu(ex->ee_block);
+ ext4_fsblk_t ee_start = ext4_ext_pblock(ex);
+ unsigned short ee_len = ext4_ext_get_actual_len(ex);
+
+ /* The extent passed in that we are trying to match */
+ ex_cluster_start = EXT4_B2C(sbi, ee_block);
+ ex_cluster_end = EXT4_B2C(sbi, ee_block + ee_len - 1);
+
+ /* The requested region passed into ext4_map_blocks() */
+ rr_cluster_start = EXT4_B2C(sbi, map->m_lblk);
+ rr_cluster_end = EXT4_B2C(sbi, map->m_lblk + map->m_len - 1);
+
+ if ((rr_cluster_start == ex_cluster_end) ||
+ (rr_cluster_start == ex_cluster_start)) {
+ if (rr_cluster_start == ex_cluster_end)
+ ee_start += ee_len - 1;
+ map->m_pblk = (ee_start & ~(sbi->s_cluster_ratio - 1)) +
+ c_offset;
+ map->m_len = min(map->m_len,
+ (unsigned) sbi->s_cluster_ratio - c_offset);
+ /*
+ * Check for and handle this case:
+ *
+ * |--------- cluster # N-------------|
+ * |------- extent ----|
+ * |--- requested region ---|
+ * |===========|
+ */
+
+ if (map->m_lblk < ee_block)
+ map->m_len = min(map->m_len, ee_block - map->m_lblk);
+
+ /*
+ * Check for the case where there is already another allocated
+ * block to the right of 'ex' but before the end of the cluster.
+ *
+ * |------------- cluster # N-------------|
+ * |----- ex -----| |---- ex_right ----|
+ * |------ requested region ------|
+ * |================|
+ */
+ if (map->m_lblk > ee_block) {
+ ext4_lblk_t next = ext4_ext_next_allocated_block(path);
+ map->m_len = min(map->m_len, next - map->m_lblk);
+ }
+
+ trace_ext4_get_implied_cluster_alloc_exit(sb, map, 1);
+ return 1;
+ }
+
+ trace_ext4_get_implied_cluster_alloc_exit(sb, map, 0);
+ return 0;
+}
+
+
+/*
* Block allocation/map/preallocation routine for extents based files
*
*
@@ -3311,15 +3704,17 @@
struct ext4_map_blocks *map, int flags)
{
struct ext4_ext_path *path = NULL;
- struct ext4_extent newex, *ex;
+ struct ext4_extent newex, *ex, *ex2;
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
ext4_fsblk_t newblock = 0;
- int err = 0, depth, ret;
- unsigned int allocated = 0;
+ int free_on_err = 0, err = 0, depth, ret;
+ unsigned int allocated = 0, offset = 0;
+ unsigned int allocated_clusters = 0;
unsigned int punched_out = 0;
unsigned int result = 0;
struct ext4_allocation_request ar;
ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
- struct ext4_map_blocks punch_map;
+ ext4_lblk_t cluster_offset;
ext_debug("blocks %u/%u requested for inode %lu\n",
map->m_lblk, map->m_len, inode->i_ino);
@@ -3329,6 +3724,10 @@
if (!(flags & EXT4_GET_BLOCKS_PUNCH_OUT_EXT) &&
ext4_ext_in_cache(inode, map->m_lblk, &newex)) {
if (!newex.ee_start_lo && !newex.ee_start_hi) {
+ if ((sbi->s_cluster_ratio > 1) &&
+ ext4_find_delalloc_cluster(inode, map->m_lblk, 0))
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+
if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
/*
* block isn't allocated yet and
@@ -3339,6 +3738,8 @@
/* we should allocate requested block */
} else {
/* block is already allocated */
+ if (sbi->s_cluster_ratio > 1)
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
newblock = map->m_lblk
- le32_to_cpu(newex.ee_block)
+ ext4_ext_pblock(&newex);
@@ -3384,8 +3785,14 @@
* we split out initialized portions during a write.
*/
ee_len = ext4_ext_get_actual_len(ex);
+
+ trace_ext4_ext_show_extent(inode, ee_block, ee_start, ee_len);
+
/* if found extent covers block, simply return it */
if (in_range(map->m_lblk, ee_block, ee_len)) {
+ struct ext4_map_blocks punch_map;
+ ext4_fsblk_t partial_cluster = 0;
+
newblock = map->m_lblk - ee_block + ee_start;
/* number of remaining blocks in the extent */
allocated = ee_len - (map->m_lblk - ee_block);
@@ -3469,7 +3876,8 @@
ext4_ext_invalidate_cache(inode);
err = ext4_ext_rm_leaf(handle, inode, path,
- map->m_lblk, map->m_lblk + punched_out);
+ &partial_cluster, map->m_lblk,
+ map->m_lblk + punched_out);
if (!err && path->p_hdr->eh_entries == 0) {
/*
@@ -3492,6 +3900,10 @@
}
}
+ if ((sbi->s_cluster_ratio > 1) &&
+ ext4_find_delalloc_cluster(inode, map->m_lblk, 0))
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+
/*
* requested block isn't allocated yet;
* we couldn't try to create block if create flag is zero
@@ -3504,9 +3916,25 @@
ext4_ext_put_gap_in_cache(inode, path, map->m_lblk);
goto out2;
}
+
/*
* Okay, we need to do block allocation.
*/
+ map->m_flags &= ~EXT4_MAP_FROM_CLUSTER;
+ newex.ee_block = cpu_to_le32(map->m_lblk);
+ cluster_offset = map->m_lblk & (sbi->s_cluster_ratio-1);
+
+ /*
+ * If we are doing bigalloc, check to see if the extent returned
+ * by ext4_ext_find_extent() implies a cluster we can use.
+ */
+ if (cluster_offset && ex &&
+ get_implied_cluster_alloc(inode->i_sb, map, ex, path)) {
+ ar.len = allocated = map->m_len;
+ newblock = map->m_pblk;
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+ goto got_allocated_blocks;
+ }
/* find neighbour allocated blocks */
ar.lleft = map->m_lblk;
@@ -3514,10 +3942,21 @@
if (err)
goto out2;
ar.lright = map->m_lblk;
- err = ext4_ext_search_right(inode, path, &ar.lright, &ar.pright);
+ ex2 = NULL;
+ err = ext4_ext_search_right(inode, path, &ar.lright, &ar.pright, &ex2);
if (err)
goto out2;
+ /* Check if the extent after searching to the right implies a
+ * cluster we can use. */
+ if ((sbi->s_cluster_ratio > 1) && ex2 &&
+ get_implied_cluster_alloc(inode->i_sb, map, ex2, path)) {
+ ar.len = allocated = map->m_len;
+ newblock = map->m_pblk;
+ map->m_flags |= EXT4_MAP_FROM_CLUSTER;
+ goto got_allocated_blocks;
+ }
+
/*
* See if request is beyond maximum number of blocks we can have in
* a single extent. For an initialized extent this limit is
@@ -3532,9 +3971,8 @@
map->m_len = EXT_UNINIT_MAX_LEN;
/* Check if we can really insert (m_lblk)::(m_lblk + m_len) extent */
- newex.ee_block = cpu_to_le32(map->m_lblk);
newex.ee_len = cpu_to_le16(map->m_len);
- err = ext4_ext_check_overlap(inode, &newex, path);
+ err = ext4_ext_check_overlap(sbi, inode, &newex, path);
if (err)
allocated = ext4_ext_get_actual_len(&newex);
else
@@ -3544,7 +3982,18 @@
ar.inode = inode;
ar.goal = ext4_ext_find_goal(inode, path, map->m_lblk);
ar.logical = map->m_lblk;
- ar.len = allocated;
+ /*
+ * We calculate the offset from the beginning of the cluster
+ * for the logical block number, since when we allocate a
+ * physical cluster, the physical block should start at the
+ * same offset from the beginning of the cluster. This is
+ * needed so that future calls to get_implied_cluster_alloc()
+ * work correctly.
+ */
+ offset = map->m_lblk & (sbi->s_cluster_ratio - 1);
+ ar.len = EXT4_NUM_B2C(sbi, offset+allocated);
+ ar.goal -= offset;
+ ar.logical -= offset;
if (S_ISREG(inode->i_mode))
ar.flags = EXT4_MB_HINT_DATA;
else
@@ -3557,9 +4006,15 @@
goto out2;
ext_debug("allocate new block: goal %llu, found %llu/%u\n",
ar.goal, newblock, allocated);
+ free_on_err = 1;
+ allocated_clusters = ar.len;
+ ar.len = EXT4_C2B(sbi, ar.len) - offset;
+ if (ar.len > allocated)
+ ar.len = allocated;
+got_allocated_blocks:
/* try to insert new extent into found leaf and return */
- ext4_ext_store_pblock(&newex, newblock);
+ ext4_ext_store_pblock(&newex, newblock + offset);
newex.ee_len = cpu_to_le16(ar.len);
/* Mark uninitialized */
if (flags & EXT4_GET_BLOCKS_UNINIT_EXT){
@@ -3572,10 +4027,9 @@
* that we need to perform conversion when IO is done.
*/
if ((flags & EXT4_GET_BLOCKS_PRE_IO)) {
- if (io && !(io->flag & EXT4_IO_END_UNWRITTEN)) {
- io->flag = EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- } else
+ if (io)
+ ext4_set_io_unwritten_flag(inode, io);
+ else
ext4_set_inode_state(inode,
EXT4_STATE_DIO_UNWRITTEN);
}
@@ -3583,11 +4037,14 @@
map->m_flags |= EXT4_MAP_UNINIT;
}
- err = check_eofblocks_fl(handle, inode, map->m_lblk, path, ar.len);
+ err = 0;
+ if ((flags & EXT4_GET_BLOCKS_KEEP_SIZE) == 0)
+ err = check_eofblocks_fl(handle, inode, map->m_lblk,
+ path, ar.len);
if (!err)
err = ext4_ext_insert_extent(handle, inode, path,
&newex, flags);
- if (err) {
+ if (err && free_on_err) {
int fb_flags = flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE ?
EXT4_FREE_BLOCKS_NO_QUOT_UPDATE : 0;
/* free data blocks we just allocated */
@@ -3610,8 +4067,82 @@
* Update reserved blocks/metadata blocks after successful
* block allocation which had been deferred till now.
*/
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
- ext4_da_update_reserve_space(inode, allocated, 1);
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
+ unsigned int reserved_clusters;
+ /*
+ * Check how many clusters we had reserved this allocated range
+ */
+ reserved_clusters = get_reserved_cluster_alloc(inode,
+ map->m_lblk, allocated);
+ if (map->m_flags & EXT4_MAP_FROM_CLUSTER) {
+ if (reserved_clusters) {
+ /*
+ * We have clusters reserved for this range.
+ * But since we are not doing actual allocation
+ * and are simply using blocks from previously
+ * allocated cluster, we should release the
+ * reservation and not claim quota.
+ */
+ ext4_da_update_reserve_space(inode,
+ reserved_clusters, 0);
+ }
+ } else {
+ BUG_ON(allocated_clusters < reserved_clusters);
+ /* We will claim quota for all newly allocated blocks.*/
+ ext4_da_update_reserve_space(inode, allocated_clusters,
+ 1);
+ if (reserved_clusters < allocated_clusters) {
+ struct ext4_inode_info *ei = EXT4_I(inode);
+ int reservation = allocated_clusters -
+ reserved_clusters;
+ /*
+ * It seems we claimed few clusters outside of
+ * the range of this allocation. We should give
+ * it back to the reservation pool. This can
+ * happen in the following case:
+ *
+ * * Suppose s_cluster_ratio is 4 (i.e., each
+ * cluster has 4 blocks. Thus, the clusters
+ * are [0-3],[4-7],[8-11]...
+ * * First comes delayed allocation write for
+ * logical blocks 10 & 11. Since there were no
+ * previous delayed allocated blocks in the
+ * range [8-11], we would reserve 1 cluster
+ * for this write.
+ * * Next comes write for logical blocks 3 to 8.
+ * In this case, we will reserve 2 clusters
+ * (for [0-3] and [4-7]; and not for [8-11] as
+ * that range has a delayed allocated blocks.
+ * Thus total reserved clusters now becomes 3.
+ * * Now, during the delayed allocation writeout
+ * time, we will first write blocks [3-8] and
+ * allocate 3 clusters for writing these
+ * blocks. Also, we would claim all these
+ * three clusters above.
+ * * Now when we come here to writeout the
+ * blocks [10-11], we would expect to claim
+ * the reservation of 1 cluster we had made
+ * (and we would claim it since there are no
+ * more delayed allocated blocks in the range
+ * [8-11]. But our reserved cluster count had
+ * already gone to 0.
+ *
+ * Thus, at the step 4 above when we determine
+ * that there are still some unwritten delayed
+ * allocated blocks outside of our current
+ * block range, we should increment the
+ * reserved clusters count so that when the
+ * remaining blocks finally gets written, we
+ * could claim them.
+ */
+ dquot_reserve_block(inode,
+ EXT4_C2B(sbi, reservation));
+ spin_lock(&ei->i_block_reservation_lock);
+ ei->i_reserved_data_blocks += reservation;
+ spin_unlock(&ei->i_block_reservation_lock);
+ }
+ }
+ }
/*
* Cache the extent and update transaction to commit on fdatasync only
@@ -3634,12 +4165,12 @@
ext4_ext_drop_refs(path);
kfree(path);
}
- trace_ext4_ext_map_blocks_exit(inode, map->m_lblk,
- newblock, map->m_len, err ? err : allocated);
-
result = (flags & EXT4_GET_BLOCKS_PUNCH_OUT_EXT) ?
punched_out : allocated;
+ trace_ext4_ext_map_blocks_exit(inode, map->m_lblk,
+ newblock, map->m_len, err ? err : result);
+
return err ? err : result;
}
@@ -3649,6 +4180,7 @@
struct super_block *sb = inode->i_sb;
ext4_lblk_t last_block;
handle_t *handle;
+ loff_t page_len;
int err = 0;
/*
@@ -3665,8 +4197,16 @@
if (IS_ERR(handle))
return;
- if (inode->i_size & (sb->s_blocksize - 1))
- ext4_block_truncate_page(handle, mapping, inode->i_size);
+ if (inode->i_size % PAGE_CACHE_SIZE != 0) {
+ page_len = PAGE_CACHE_SIZE -
+ (inode->i_size & (PAGE_CACHE_SIZE - 1));
+
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, inode->i_size, page_len, 0);
+
+ if (err)
+ goto out_stop;
+ }
if (ext4_orphan_add(handle, inode))
goto out_stop;
@@ -3760,6 +4300,7 @@
int ret = 0;
int ret2 = 0;
int retries = 0;
+ int flags;
struct ext4_map_blocks map;
unsigned int credits, blkbits = inode->i_blkbits;
@@ -3796,6 +4337,16 @@
trace_ext4_fallocate_exit(inode, offset, max_blocks, ret);
return ret;
}
+ flags = EXT4_GET_BLOCKS_CREATE_UNINIT_EXT;
+ if (mode & FALLOC_FL_KEEP_SIZE)
+ flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
+ /*
+ * Don't normalize the request if it can fit in one extent so
+ * that it doesn't get unnecessarily split into multiple
+ * extents.
+ */
+ if (len <= EXT_UNINIT_MAX_LEN << blkbits)
+ flags |= EXT4_GET_BLOCKS_NO_NORMALIZE;
retry:
while (ret >= 0 && ret < max_blocks) {
map.m_lblk = map.m_lblk + ret;
@@ -3805,9 +4356,7 @@
ret = PTR_ERR(handle);
break;
}
- ret = ext4_map_blocks(handle, inode, &map,
- EXT4_GET_BLOCKS_CREATE_UNINIT_EXT |
- EXT4_GET_BLOCKS_NO_NORMALIZE);
+ ret = ext4_map_blocks(handle, inode, &map, flags);
if (ret <= 0) {
#ifdef EXT4FS_DEBUG
WARN_ON(ret <= 0);
@@ -4102,7 +4651,6 @@
return EXT_BREAK;
return EXT_CONTINUE;
}
-
/* fiemap flags we can handle specified here */
#define EXT4_FIEMAP_FLAGS (FIEMAP_FLAG_SYNC|FIEMAP_FLAG_XATTR)
@@ -4162,17 +4710,28 @@
struct address_space *mapping = inode->i_mapping;
struct ext4_map_blocks map;
handle_t *handle;
- loff_t first_block_offset, last_block_offset, block_len;
- loff_t first_page, last_page, first_page_offset, last_page_offset;
+ loff_t first_page, last_page, page_len;
+ loff_t first_page_offset, last_page_offset;
int ret, credits, blocks_released, err = 0;
+ /* No need to punch hole beyond i_size */
+ if (offset >= inode->i_size)
+ return 0;
+
+ /*
+ * If the hole extends beyond i_size, set the hole
+ * to end after the page that contains i_size
+ */
+ if (offset + length > inode->i_size) {
+ length = inode->i_size +
+ PAGE_CACHE_SIZE - (inode->i_size & (PAGE_CACHE_SIZE - 1)) -
+ offset;
+ }
+
first_block = (offset + sb->s_blocksize - 1) >>
EXT4_BLOCK_SIZE_BITS(sb);
last_block = (offset + length) >> EXT4_BLOCK_SIZE_BITS(sb);
- first_block_offset = first_block << EXT4_BLOCK_SIZE_BITS(sb);
- last_block_offset = last_block << EXT4_BLOCK_SIZE_BITS(sb);
-
first_page = (offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
last_page = (offset + length) >> PAGE_CACHE_SHIFT;
@@ -4185,11 +4744,10 @@
*/
if (mapping->nrpages && mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
err = filemap_write_and_wait_range(mapping,
- first_page_offset == 0 ? 0 : first_page_offset-1,
- last_page_offset);
+ offset, offset + length - 1);
- if (err)
- return err;
+ if (err)
+ return err;
}
/* Now release the pages */
@@ -4211,24 +4769,64 @@
goto out;
/*
- * Now we need to zero out the un block aligned data.
- * If the file is smaller than a block, just
- * zero out the middle
+ * Now we need to zero out the non-page-aligned data in the
+ * pages at the start and tail of the hole, and unmap the buffer
+ * heads for the block aligned regions of the page that were
+ * completely zeroed.
*/
- if (first_block > last_block)
- ext4_block_zero_page_range(handle, mapping, offset, length);
- else {
- /* zero out the head of the hole before the first block */
- block_len = first_block_offset - offset;
- if (block_len > 0)
- ext4_block_zero_page_range(handle, mapping,
- offset, block_len);
+ if (first_page > last_page) {
+ /*
+ * If the file space being truncated is contained within a page
+ * just zero out and unmap the middle of that page
+ */
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, offset, length, 0);
- /* zero out the tail of the hole after the last block */
- block_len = offset + length - last_block_offset;
- if (block_len > 0) {
- ext4_block_zero_page_range(handle, mapping,
- last_block_offset, block_len);
+ if (err)
+ goto out;
+ } else {
+ /*
+ * zero out and unmap the partial page that contains
+ * the start of the hole
+ */
+ page_len = first_page_offset - offset;
+ if (page_len > 0) {
+ err = ext4_discard_partial_page_buffers(handle, mapping,
+ offset, page_len, 0);
+ if (err)
+ goto out;
+ }
+
+ /*
+ * zero out and unmap the partial page that contains
+ * the end of the hole
+ */
+ page_len = offset + length - last_page_offset;
+ if (page_len > 0) {
+ err = ext4_discard_partial_page_buffers(handle, mapping,
+ last_page_offset, page_len, 0);
+ if (err)
+ goto out;
+ }
+ }
+
+
+ /*
+ * If i_size is contained in the last page, we need to
+ * unmap and zero the partial page after i_size
+ */
+ if (inode->i_size >> PAGE_CACHE_SHIFT == last_page &&
+ inode->i_size % PAGE_CACHE_SIZE != 0) {
+
+ page_len = PAGE_CACHE_SIZE -
+ (inode->i_size & (PAGE_CACHE_SIZE - 1));
+
+ if (page_len > 0) {
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, inode->i_size, page_len, 0);
+
+ if (err)
+ goto out;
}
}
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index b9548f4..cb70f18 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -181,8 +181,8 @@
path.dentry = mnt->mnt_root;
cp = d_path(&path, buf, sizeof(buf));
if (!IS_ERR(cp)) {
- memcpy(sbi->s_es->s_last_mounted, cp,
- sizeof(sbi->s_es->s_last_mounted));
+ strlcpy(sbi->s_es->s_last_mounted, cp,
+ sizeof(sbi->s_es->s_last_mounted));
ext4_mark_super_dirty(sb);
}
}
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 036f78f..00a2cb7 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -75,7 +75,7 @@
* to written.
* The function return the number of pending IOs on success.
*/
-extern int ext4_flush_completed_IO(struct inode *inode)
+int ext4_flush_completed_IO(struct inode *inode)
{
ext4_io_end_t *io;
struct ext4_inode_info *ei = EXT4_I(inode);
@@ -83,14 +83,12 @@
int ret = 0;
int ret2 = 0;
- if (list_empty(&ei->i_completed_io_list))
- return ret;
-
dump_completed_IO(inode);
spin_lock_irqsave(&ei->i_completed_io_lock, flags);
while (!list_empty(&ei->i_completed_io_list)){
io = list_entry(ei->i_completed_io_list.next,
ext4_io_end_t, list);
+ list_del_init(&io->list);
/*
* Calling ext4_end_io_nolock() to convert completed
* IO to written.
@@ -107,11 +105,9 @@
*/
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
ret = ext4_end_io_nolock(io);
- spin_lock_irqsave(&ei->i_completed_io_lock, flags);
if (ret < 0)
ret2 = ret;
- else
- list_del_init(&io->list);
+ spin_lock_irqsave(&ei->i_completed_io_lock, flags);
}
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
return (ret2 < 0) ? ret2 : 0;
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 9c63f27..00beb4f 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -78,7 +78,7 @@
* allocation, essentially implementing a per-group read-only flag. */
if (!ext4_group_desc_csum_verify(sbi, block_group, gdp)) {
ext4_error(sb, "Checksum bad for group %u", block_group);
- ext4_free_blks_set(sb, gdp, 0);
+ ext4_free_group_clusters_set(sb, gdp, 0);
ext4_free_inodes_set(sb, gdp, 0);
ext4_itable_unused_set(sb, gdp, 0);
memset(bh->b_data, 0xff, sb->s_blocksize);
@@ -293,121 +293,9 @@
ext4_std_error(sb, fatal);
}
-/*
- * There are two policies for allocating an inode. If the new inode is
- * a directory, then a forward search is made for a block group with both
- * free space and a low directory-to-inode ratio; if that fails, then of
- * the groups with above-average free space, that group with the fewest
- * directories already is chosen.
- *
- * For other inodes, search forward from the parent directory\'s block
- * group to find a free inode.
- */
-static int find_group_dir(struct super_block *sb, struct inode *parent,
- ext4_group_t *best_group)
-{
- ext4_group_t ngroups = ext4_get_groups_count(sb);
- unsigned int freei, avefreei;
- struct ext4_group_desc *desc, *best_desc = NULL;
- ext4_group_t group;
- int ret = -1;
-
- freei = percpu_counter_read_positive(&EXT4_SB(sb)->s_freeinodes_counter);
- avefreei = freei / ngroups;
-
- for (group = 0; group < ngroups; group++) {
- desc = ext4_get_group_desc(sb, group, NULL);
- if (!desc || !ext4_free_inodes_count(sb, desc))
- continue;
- if (ext4_free_inodes_count(sb, desc) < avefreei)
- continue;
- if (!best_desc ||
- (ext4_free_blks_count(sb, desc) >
- ext4_free_blks_count(sb, best_desc))) {
- *best_group = group;
- best_desc = desc;
- ret = 0;
- }
- }
- return ret;
-}
-
-#define free_block_ratio 10
-
-static int find_group_flex(struct super_block *sb, struct inode *parent,
- ext4_group_t *best_group)
-{
- struct ext4_sb_info *sbi = EXT4_SB(sb);
- struct ext4_group_desc *desc;
- struct flex_groups *flex_group = sbi->s_flex_groups;
- ext4_group_t parent_group = EXT4_I(parent)->i_block_group;
- ext4_group_t parent_fbg_group = ext4_flex_group(sbi, parent_group);
- ext4_group_t ngroups = ext4_get_groups_count(sb);
- int flex_size = ext4_flex_bg_size(sbi);
- ext4_group_t best_flex = parent_fbg_group;
- int blocks_per_flex = sbi->s_blocks_per_group * flex_size;
- int flexbg_free_blocks;
- int flex_freeb_ratio;
- ext4_group_t n_fbg_groups;
- ext4_group_t i;
-
- n_fbg_groups = (ngroups + flex_size - 1) >>
- sbi->s_log_groups_per_flex;
-
-find_close_to_parent:
- flexbg_free_blocks = atomic_read(&flex_group[best_flex].free_blocks);
- flex_freeb_ratio = flexbg_free_blocks * 100 / blocks_per_flex;
- if (atomic_read(&flex_group[best_flex].free_inodes) &&
- flex_freeb_ratio > free_block_ratio)
- goto found_flexbg;
-
- if (best_flex && best_flex == parent_fbg_group) {
- best_flex--;
- goto find_close_to_parent;
- }
-
- for (i = 0; i < n_fbg_groups; i++) {
- if (i == parent_fbg_group || i == parent_fbg_group - 1)
- continue;
-
- flexbg_free_blocks = atomic_read(&flex_group[i].free_blocks);
- flex_freeb_ratio = flexbg_free_blocks * 100 / blocks_per_flex;
-
- if (flex_freeb_ratio > free_block_ratio &&
- (atomic_read(&flex_group[i].free_inodes))) {
- best_flex = i;
- goto found_flexbg;
- }
-
- if ((atomic_read(&flex_group[best_flex].free_inodes) == 0) ||
- ((atomic_read(&flex_group[i].free_blocks) >
- atomic_read(&flex_group[best_flex].free_blocks)) &&
- atomic_read(&flex_group[i].free_inodes)))
- best_flex = i;
- }
-
- if (!atomic_read(&flex_group[best_flex].free_inodes) ||
- !atomic_read(&flex_group[best_flex].free_blocks))
- return -1;
-
-found_flexbg:
- for (i = best_flex * flex_size; i < ngroups &&
- i < (best_flex + 1) * flex_size; i++) {
- desc = ext4_get_group_desc(sb, i, NULL);
- if (ext4_free_inodes_count(sb, desc)) {
- *best_group = i;
- goto out;
- }
- }
-
- return -1;
-out:
- return 0;
-}
-
struct orlov_stats {
__u32 free_inodes;
- __u32 free_blocks;
+ __u32 free_clusters;
__u32 used_dirs;
};
@@ -424,7 +312,7 @@
if (flex_size > 1) {
stats->free_inodes = atomic_read(&flex_group[g].free_inodes);
- stats->free_blocks = atomic_read(&flex_group[g].free_blocks);
+ stats->free_clusters = atomic_read(&flex_group[g].free_clusters);
stats->used_dirs = atomic_read(&flex_group[g].used_dirs);
return;
}
@@ -432,11 +320,11 @@
desc = ext4_get_group_desc(sb, g, NULL);
if (desc) {
stats->free_inodes = ext4_free_inodes_count(sb, desc);
- stats->free_blocks = ext4_free_blks_count(sb, desc);
+ stats->free_clusters = ext4_free_group_clusters(sb, desc);
stats->used_dirs = ext4_used_dirs_count(sb, desc);
} else {
stats->free_inodes = 0;
- stats->free_blocks = 0;
+ stats->free_clusters = 0;
stats->used_dirs = 0;
}
}
@@ -471,10 +359,10 @@
ext4_group_t real_ngroups = ext4_get_groups_count(sb);
int inodes_per_group = EXT4_INODES_PER_GROUP(sb);
unsigned int freei, avefreei;
- ext4_fsblk_t freeb, avefreeb;
+ ext4_fsblk_t freeb, avefreec;
unsigned int ndirs;
int max_dirs, min_inodes;
- ext4_grpblk_t min_blocks;
+ ext4_grpblk_t min_clusters;
ext4_group_t i, grp, g, ngroups;
struct ext4_group_desc *desc;
struct orlov_stats stats;
@@ -490,9 +378,10 @@
freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter);
avefreei = freei / ngroups;
- freeb = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
- avefreeb = freeb;
- do_div(avefreeb, ngroups);
+ freeb = EXT4_C2B(sbi,
+ percpu_counter_read_positive(&sbi->s_freeclusters_counter));
+ avefreec = freeb;
+ do_div(avefreec, ngroups);
ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter);
if (S_ISDIR(mode) &&
@@ -518,7 +407,7 @@
continue;
if (stats.free_inodes < avefreei)
continue;
- if (stats.free_blocks < avefreeb)
+ if (stats.free_clusters < avefreec)
continue;
grp = g;
ret = 0;
@@ -556,7 +445,7 @@
min_inodes = avefreei - inodes_per_group*flex_size / 4;
if (min_inodes < 1)
min_inodes = 1;
- min_blocks = avefreeb - EXT4_BLOCKS_PER_GROUP(sb)*flex_size / 4;
+ min_clusters = avefreec - EXT4_CLUSTERS_PER_GROUP(sb)*flex_size / 4;
/*
* Start looking in the flex group where we last allocated an
@@ -575,7 +464,7 @@
continue;
if (stats.free_inodes < min_inodes)
continue;
- if (stats.free_blocks < min_blocks)
+ if (stats.free_clusters < min_clusters)
continue;
goto found_flex_bg;
}
@@ -659,7 +548,7 @@
*group = parent_group;
desc = ext4_get_group_desc(sb, *group, NULL);
if (desc && ext4_free_inodes_count(sb, desc) &&
- ext4_free_blks_count(sb, desc))
+ ext4_free_group_clusters(sb, desc))
return 0;
/*
@@ -683,7 +572,7 @@
*group -= ngroups;
desc = ext4_get_group_desc(sb, *group, NULL);
if (desc && ext4_free_inodes_count(sb, desc) &&
- ext4_free_blks_count(sb, desc))
+ ext4_free_group_clusters(sb, desc))
return 0;
}
@@ -802,7 +691,7 @@
* group to find a free inode.
*/
struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode,
- const struct qstr *qstr, __u32 goal)
+ const struct qstr *qstr, __u32 goal, uid_t *owner)
{
struct super_block *sb;
struct buffer_head *inode_bitmap_bh = NULL;
@@ -816,8 +705,6 @@
int ret2, err = 0;
struct inode *ret;
ext4_group_t i;
- int free = 0;
- static int once = 1;
ext4_group_t flex_group;
/* Cannot create files in a deleted directory */
@@ -843,26 +730,9 @@
goto got_group;
}
- if (sbi->s_log_groups_per_flex && test_opt(sb, OLDALLOC)) {
- ret2 = find_group_flex(sb, dir, &group);
- if (ret2 == -1) {
- ret2 = find_group_other(sb, dir, &group, mode);
- if (ret2 == 0 && once) {
- once = 0;
- printk(KERN_NOTICE "ext4: find_group_flex "
- "failed, fallback succeeded dir %lu\n",
- dir->i_ino);
- }
- }
- goto got_group;
- }
-
- if (S_ISDIR(mode)) {
- if (test_opt(sb, OLDALLOC))
- ret2 = find_group_dir(sb, dir, &group);
- else
- ret2 = find_group_orlov(sb, dir, &group, mode, qstr);
- } else
+ if (S_ISDIR(mode))
+ ret2 = find_group_orlov(sb, dir, &group, mode, qstr);
+ else
ret2 = find_group_other(sb, dir, &group, mode);
got_group:
@@ -950,26 +820,21 @@
goto fail;
}
- free = 0;
- ext4_lock_group(sb, group);
+ BUFFER_TRACE(block_bitmap_bh, "dirty block bitmap");
+ err = ext4_handle_dirty_metadata(handle, NULL, block_bitmap_bh);
+ brelse(block_bitmap_bh);
+
/* recheck and clear flag under lock if we still need to */
+ ext4_lock_group(sb, group);
if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
- free = ext4_free_blocks_after_init(sb, group, gdp);
gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
- ext4_free_blks_set(sb, gdp, free);
+ ext4_free_group_clusters_set(sb, gdp,
+ ext4_free_clusters_after_init(sb, group, gdp));
gdp->bg_checksum = ext4_group_desc_csum(sbi, group,
gdp);
}
ext4_unlock_group(sb, group);
- /* Don't need to dirty bitmap block if we didn't change it */
- if (free) {
- BUFFER_TRACE(block_bitmap_bh, "dirty block bitmap");
- err = ext4_handle_dirty_metadata(handle,
- NULL, block_bitmap_bh);
- }
-
- brelse(block_bitmap_bh);
if (err)
goto fail;
}
@@ -987,8 +852,11 @@
flex_group = ext4_flex_group(sbi, group);
atomic_dec(&sbi->s_flex_groups[flex_group].free_inodes);
}
-
- if (test_opt(sb, GRPID)) {
+ if (owner) {
+ inode->i_mode = mode;
+ inode->i_uid = owner[0];
+ inode->i_gid = owner[1];
+ } else if (test_opt(sb, GRPID)) {
inode->i_mode = mode;
inode->i_uid = current_fsuid();
inode->i_gid = dir->i_gid;
@@ -1005,11 +873,7 @@
ei->i_dir_start_lookup = 0;
ei->i_disksize = 0;
- /*
- * Don't inherit extent flag from directory, amongst others. We set
- * extent flag on newly created directory and file only if -o extent
- * mount option is specified
- */
+ /* Don't inherit extent flag from directory, amongst others. */
ei->i_flags =
ext4_mask_flags(mode, EXT4_I(dir)->i_flags & EXT4_FL_INHERITED);
ei->i_file_acl = 0;
@@ -1084,7 +948,7 @@
fail_drop:
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
brelse(inode_bitmap_bh);
@@ -1235,7 +1099,7 @@
* inode allocation from the current group, so we take alloc_sem lock, to
* block ext4_claim_inode until we are finished.
*/
-extern int ext4_init_inode_table(struct super_block *sb, ext4_group_t group,
+int ext4_init_inode_table(struct super_block *sb, ext4_group_t group,
int barrier)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
diff --git a/fs/ext4/indirect.c b/fs/ext4/indirect.c
index 0962642..3cfc73f 100644
--- a/fs/ext4/indirect.c
+++ b/fs/ext4/indirect.c
@@ -699,6 +699,13 @@
/*
* Okay, we need to do block allocation.
*/
+ if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ EXT4_ERROR_INODE(inode, "Can't allocate blocks for "
+ "non-extent mapped inodes with bigalloc");
+ return -ENOSPC;
+ }
+
goal = ext4_find_goal(inode, map->m_lblk, partial);
/* the number of blocks need to allocate for [d,t]indirect blocks */
@@ -1343,7 +1350,9 @@
__le32 nr = 0;
int n = 0;
ext4_lblk_t last_block, max_block;
+ loff_t page_len;
unsigned blocksize = inode->i_sb->s_blocksize;
+ int err;
handle = start_transaction(inode);
if (IS_ERR(handle))
@@ -1354,9 +1363,16 @@
max_block = (EXT4_SB(inode->i_sb)->s_bitmap_maxbytes + blocksize-1)
>> EXT4_BLOCK_SIZE_BITS(inode->i_sb);
- if (inode->i_size & (blocksize - 1))
- if (ext4_block_truncate_page(handle, mapping, inode->i_size))
+ if (inode->i_size % PAGE_CACHE_SIZE != 0) {
+ page_len = PAGE_CACHE_SIZE -
+ (inode->i_size & (PAGE_CACHE_SIZE - 1));
+
+ err = ext4_discard_partial_page_buffers(handle,
+ mapping, inode->i_size, page_len, 0);
+
+ if (err)
goto out_stop;
+ }
if (last_block != max_block) {
n = ext4_block_to_path(inode, last_block, offsets, NULL);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 0defe0b..cc5a6da 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -42,7 +42,6 @@
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
-#include "ext4_extents.h"
#include "truncate.h"
#include <trace/events/ext4.h>
@@ -268,7 +267,7 @@
struct ext4_inode_info *ei = EXT4_I(inode);
spin_lock(&ei->i_block_reservation_lock);
- trace_ext4_da_update_reserve_space(inode, used);
+ trace_ext4_da_update_reserve_space(inode, used, quota_claim);
if (unlikely(used > ei->i_reserved_data_blocks)) {
ext4_msg(inode->i_sb, KERN_NOTICE, "%s: ino %lu, used %d "
"with only %d reserved data blocks\n",
@@ -281,7 +280,7 @@
/* Update per-inode reservations */
ei->i_reserved_data_blocks -= used;
ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks;
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
used + ei->i_allocated_meta_blocks);
ei->i_allocated_meta_blocks = 0;
@@ -291,7 +290,7 @@
* only when we have written all of the delayed
* allocation blocks.
*/
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
ei->i_reserved_meta_blocks);
ei->i_reserved_meta_blocks = 0;
ei->i_da_metadata_calc_len = 0;
@@ -300,14 +299,14 @@
/* Update quota subsystem for data blocks */
if (quota_claim)
- dquot_claim_block(inode, used);
+ dquot_claim_block(inode, EXT4_C2B(sbi, used));
else {
/*
* We did fallocate with an offset that is already delayed
* allocated. So on delayed allocated writeback we should
* not re-claim the quota for fallocated blocks.
*/
- dquot_release_reservation_block(inode, used);
+ dquot_release_reservation_block(inode, EXT4_C2B(sbi, used));
}
/*
@@ -399,6 +398,49 @@
}
/*
+ * Sets the BH_Da_Mapped bit on the buffer heads corresponding to the given map.
+ */
+static void set_buffers_da_mapped(struct inode *inode,
+ struct ext4_map_blocks *map)
+{
+ struct address_space *mapping = inode->i_mapping;
+ struct pagevec pvec;
+ int i, nr_pages;
+ pgoff_t index, end;
+
+ index = map->m_lblk >> (PAGE_CACHE_SHIFT - inode->i_blkbits);
+ end = (map->m_lblk + map->m_len - 1) >>
+ (PAGE_CACHE_SHIFT - inode->i_blkbits);
+
+ pagevec_init(&pvec, 0);
+ while (index <= end) {
+ nr_pages = pagevec_lookup(&pvec, mapping, index,
+ min(end - index + 1,
+ (pgoff_t)PAGEVEC_SIZE));
+ if (nr_pages == 0)
+ break;
+ for (i = 0; i < nr_pages; i++) {
+ struct page *page = pvec.pages[i];
+ struct buffer_head *bh, *head;
+
+ if (unlikely(page->mapping != mapping) ||
+ !PageDirty(page))
+ break;
+
+ if (page_has_buffers(page)) {
+ bh = head = page_buffers(page);
+ do {
+ set_buffer_da_mapped(bh);
+ bh = bh->b_this_page;
+ } while (bh != head);
+ }
+ index++;
+ }
+ pagevec_release(&pvec);
+ }
+}
+
+/*
* The ext4_map_blocks() function tries to look up the requested blocks,
* and returns if the blocks are already mapped.
*
@@ -416,7 +458,7 @@
* the buffer head is mapped.
*
* It returns 0 if plain look up failed (blocks have not been allocated), in
- * that casem, buffer head is unmapped
+ * that case, buffer head is unmapped
*
* It returns the error in case of allocation failure.
*/
@@ -435,9 +477,11 @@
*/
down_read((&EXT4_I(inode)->i_data_sem));
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)) {
- retval = ext4_ext_map_blocks(handle, inode, map, 0);
+ retval = ext4_ext_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
} else {
- retval = ext4_ind_map_blocks(handle, inode, map, 0);
+ retval = ext4_ind_map_blocks(handle, inode, map, flags &
+ EXT4_GET_BLOCKS_KEEP_SIZE);
}
up_read((&EXT4_I(inode)->i_data_sem));
@@ -455,7 +499,7 @@
* Returns if the blocks have already allocated
*
* Note that if blocks have been preallocated
- * ext4_ext_get_block() returns th create = 0
+ * ext4_ext_get_block() returns the create = 0
* with buffer head unmapped.
*/
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED)
@@ -517,9 +561,17 @@
(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE))
ext4_da_update_reserve_space(inode, retval, 1);
}
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) {
ext4_clear_inode_state(inode, EXT4_STATE_DELALLOC_RESERVED);
+ /* If we have successfully mapped the delayed allocated blocks,
+ * set the BH_Da_Mapped bit on them. Its important to do this
+ * under the protection of i_data_sem.
+ */
+ if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED)
+ set_buffers_da_mapped(inode, map);
+ }
+
up_write((&EXT4_I(inode)->i_data_sem));
if (retval > 0 && map->m_flags & EXT4_MAP_MAPPED) {
int ret = check_block_validity(inode, map);
@@ -909,7 +961,11 @@
ext4_orphan_add(handle, inode);
if (ret2 < 0)
ret = ret2;
+ } else {
+ unlock_page(page);
+ page_cache_release(page);
}
+
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
@@ -1037,14 +1093,14 @@
}
/*
- * Reserve a single block located at lblock
+ * Reserve a single cluster located at lblock
*/
static int ext4_da_reserve_space(struct inode *inode, ext4_lblk_t lblock)
{
int retries = 0;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
struct ext4_inode_info *ei = EXT4_I(inode);
- unsigned long md_needed;
+ unsigned int md_needed;
int ret;
/*
@@ -1054,7 +1110,8 @@
*/
repeat:
spin_lock(&ei->i_block_reservation_lock);
- md_needed = ext4_calc_metadata_amount(inode, lblock);
+ md_needed = EXT4_NUM_B2C(sbi,
+ ext4_calc_metadata_amount(inode, lblock));
trace_ext4_da_reserve_space(inode, md_needed);
spin_unlock(&ei->i_block_reservation_lock);
@@ -1063,15 +1120,15 @@
* us from metadata over-estimation, though we may go over by
* a small amount in the end. Here we just reserve for data.
*/
- ret = dquot_reserve_block(inode, 1);
+ ret = dquot_reserve_block(inode, EXT4_C2B(sbi, 1));
if (ret)
return ret;
/*
* We do still charge estimated metadata to the sb though;
* we cannot afford to run out of free blocks.
*/
- if (ext4_claim_free_blocks(sbi, md_needed + 1, 0)) {
- dquot_release_reservation_block(inode, 1);
+ if (ext4_claim_free_clusters(sbi, md_needed + 1, 0)) {
+ dquot_release_reservation_block(inode, EXT4_C2B(sbi, 1));
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
yield();
goto repeat;
@@ -1118,19 +1175,21 @@
* We can release all of the reserved metadata blocks
* only when we have written all of the delayed
* allocation blocks.
+ * Note that in case of bigalloc, i_reserved_meta_blocks,
+ * i_reserved_data_blocks, etc. refer to number of clusters.
*/
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
ei->i_reserved_meta_blocks);
ei->i_reserved_meta_blocks = 0;
ei->i_da_metadata_calc_len = 0;
}
/* update fs dirty data blocks counter */
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, to_free);
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter, to_free);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- dquot_release_reservation_block(inode, to_free);
+ dquot_release_reservation_block(inode, EXT4_C2B(sbi, to_free));
}
static void ext4_da_page_release_reservation(struct page *page,
@@ -1139,6 +1198,9 @@
int to_release = 0;
struct buffer_head *head, *bh;
unsigned int curr_off = 0;
+ struct inode *inode = page->mapping->host;
+ struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+ int num_clusters;
head = page_buffers(page);
bh = head;
@@ -1148,10 +1210,24 @@
if ((offset <= curr_off) && (buffer_delay(bh))) {
to_release++;
clear_buffer_delay(bh);
+ clear_buffer_da_mapped(bh);
}
curr_off = next_off;
} while ((bh = bh->b_this_page) != head);
- ext4_da_release_space(page->mapping->host, to_release);
+
+ /* If we have released all the blocks belonging to a cluster, then we
+ * need to release the reserved space for that cluster. */
+ num_clusters = EXT4_NUM_B2C(sbi, to_release);
+ while (num_clusters > 0) {
+ ext4_fsblk_t lblk;
+ lblk = (page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits)) +
+ ((num_clusters - 1) << sbi->s_cluster_bits);
+ if (sbi->s_cluster_ratio == 1 ||
+ !ext4_find_delalloc_cluster(inode, lblk, 1))
+ ext4_da_release_space(inode, 1);
+
+ num_clusters--;
+ }
}
/*
@@ -1253,6 +1329,8 @@
clear_buffer_delay(bh);
bh->b_blocknr = pblock;
}
+ if (buffer_da_mapped(bh))
+ clear_buffer_da_mapped(bh);
if (buffer_unwritten(bh) ||
buffer_mapped(bh))
BUG_ON(bh->b_blocknr != pblock);
@@ -1346,12 +1424,15 @@
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
printk(KERN_CRIT "Total free blocks count %lld\n",
- ext4_count_free_blocks(inode->i_sb));
+ EXT4_C2B(EXT4_SB(inode->i_sb),
+ ext4_count_free_clusters(inode->i_sb)));
printk(KERN_CRIT "Free/Dirty block details\n");
printk(KERN_CRIT "free_blocks=%lld\n",
- (long long) percpu_counter_sum(&sbi->s_freeblocks_counter));
+ (long long) EXT4_C2B(EXT4_SB(inode->i_sb),
+ percpu_counter_sum(&sbi->s_freeclusters_counter)));
printk(KERN_CRIT "dirty_blocks=%lld\n",
- (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+ (long long) EXT4_C2B(EXT4_SB(inode->i_sb),
+ percpu_counter_sum(&sbi->s_dirtyclusters_counter)));
printk(KERN_CRIT "Block reservation details\n");
printk(KERN_CRIT "i_reserved_data_blocks=%u\n",
EXT4_I(inode)->i_reserved_data_blocks);
@@ -1430,8 +1511,7 @@
if (err == -EAGAIN)
goto submit_io;
- if (err == -ENOSPC &&
- ext4_count_free_blocks(sb)) {
+ if (err == -ENOSPC && ext4_count_free_clusters(sb)) {
mpd->retval = err;
goto submit_io;
}
@@ -1471,13 +1551,15 @@
for (i = 0; i < map.m_len; i++)
unmap_underlying_metadata(bdev, map.m_pblk + i);
- }
- if (ext4_should_order_data(mpd->inode)) {
- err = ext4_jbd2_file_inode(handle, mpd->inode);
- if (err)
- /* This only happens if the journal is aborted */
- return;
+ if (ext4_should_order_data(mpd->inode)) {
+ err = ext4_jbd2_file_inode(handle, mpd->inode);
+ if (err) {
+ /* Only if the journal is aborted */
+ mpd->retval = err;
+ goto submit_io;
+ }
+ }
}
/*
@@ -1584,6 +1666,66 @@
}
/*
+ * This function is grabs code from the very beginning of
+ * ext4_map_blocks, but assumes that the caller is from delayed write
+ * time. This function looks up the requested blocks and sets the
+ * buffer delay bit under the protection of i_data_sem.
+ */
+static int ext4_da_map_blocks(struct inode *inode, sector_t iblock,
+ struct ext4_map_blocks *map,
+ struct buffer_head *bh)
+{
+ int retval;
+ sector_t invalid_block = ~((sector_t) 0xffff);
+
+ if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+ invalid_block = ~0;
+
+ map->m_flags = 0;
+ ext_debug("ext4_da_map_blocks(): inode %lu, max_blocks %u,"
+ "logical block %lu\n", inode->i_ino, map->m_len,
+ (unsigned long) map->m_lblk);
+ /*
+ * Try to see if we can get the block without requesting a new
+ * file system block.
+ */
+ down_read((&EXT4_I(inode)->i_data_sem));
+ if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
+ retval = ext4_ext_map_blocks(NULL, inode, map, 0);
+ else
+ retval = ext4_ind_map_blocks(NULL, inode, map, 0);
+
+ if (retval == 0) {
+ /*
+ * XXX: __block_prepare_write() unmaps passed block,
+ * is it OK?
+ */
+ /* If the block was allocated from previously allocated cluster,
+ * then we dont need to reserve it again. */
+ if (!(map->m_flags & EXT4_MAP_FROM_CLUSTER)) {
+ retval = ext4_da_reserve_space(inode, iblock);
+ if (retval)
+ /* not enough space to reserve */
+ goto out_unlock;
+ }
+
+ /* Clear EXT4_MAP_FROM_CLUSTER flag since its purpose is served
+ * and it should not appear on the bh->b_state.
+ */
+ map->m_flags &= ~EXT4_MAP_FROM_CLUSTER;
+
+ map_bh(bh, inode->i_sb, invalid_block);
+ set_buffer_new(bh);
+ set_buffer_delay(bh);
+ }
+
+out_unlock:
+ up_read((&EXT4_I(inode)->i_data_sem));
+
+ return retval;
+}
+
+/*
* This is a special get_blocks_t callback which is used by
* ext4_da_write_begin(). It will either return mapped block or
* reserve space for a single block.
@@ -1600,10 +1742,6 @@
{
struct ext4_map_blocks map;
int ret = 0;
- sector_t invalid_block = ~((sector_t) 0xffff);
-
- if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
- invalid_block = ~0;
BUG_ON(create == 0);
BUG_ON(bh->b_size != inode->i_sb->s_blocksize);
@@ -1616,25 +1754,9 @@
* preallocated blocks are unmapped but should treated
* the same as allocated blocks.
*/
- ret = ext4_map_blocks(NULL, inode, &map, 0);
- if (ret < 0)
+ ret = ext4_da_map_blocks(inode, iblock, &map, bh);
+ if (ret <= 0)
return ret;
- if (ret == 0) {
- if (buffer_delay(bh))
- return 0; /* Not sure this could or should happen */
- /*
- * XXX: __block_write_begin() unmaps passed block, is it OK?
- */
- ret = ext4_da_reserve_space(inode, iblock);
- if (ret)
- /* not enough space to reserve */
- return ret;
-
- map_bh(bh, inode->i_sb, invalid_block);
- set_buffer_new(bh);
- set_buffer_delay(bh);
- return 0;
- }
map_bh(bh, inode->i_sb, map.m_pblk);
bh->b_state = (bh->b_state & ~EXT4_MAP_FLAGS) | map.m_flags;
@@ -2050,6 +2172,7 @@
struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
pgoff_t done_index = 0;
pgoff_t end;
+ struct blk_plug plug;
trace_ext4_da_writepages(inode, wbc);
@@ -2128,6 +2251,7 @@
if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
tag_pages_for_writeback(mapping, index, end);
+ blk_start_plug(&plug);
while (!ret && wbc->nr_to_write > 0) {
/*
@@ -2178,11 +2302,12 @@
ret = 0;
} else if (ret == MPAGE_DA_EXTENT_TAIL) {
/*
- * got one extent now try with
- * rest of the pages
+ * Got one extent now try with rest of the pages.
+ * If mpd.retval is set -EIO, journal is aborted.
+ * So we don't need to write any more.
*/
pages_written += mpd.pages_written;
- ret = 0;
+ ret = mpd.retval;
io_done = 1;
} else if (wbc->nr_to_write)
/*
@@ -2192,6 +2317,7 @@
*/
break;
}
+ blk_finish_plug(&plug);
if (!io_done && !cycled) {
cycled = 1;
index = 0;
@@ -2230,10 +2356,11 @@
* Delalloc need an accurate free block accounting. So switch
* to non delalloc when we are near to error range.
*/
- free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
- dirty_blocks = percpu_counter_read_positive(&sbi->s_dirtyblocks_counter);
+ free_blocks = EXT4_C2B(sbi,
+ percpu_counter_read_positive(&sbi->s_freeclusters_counter));
+ dirty_blocks = percpu_counter_read_positive(&sbi->s_dirtyclusters_counter);
if (2 * free_blocks < 3 * dirty_blocks ||
- free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) {
+ free_blocks < (dirty_blocks + EXT4_FREECLUSTERS_WATERMARK)) {
/*
* free block count is less than 150% of dirty blocks
* or free blocks is less than watermark
@@ -2259,6 +2386,7 @@
pgoff_t index;
struct inode *inode = mapping->host;
handle_t *handle;
+ loff_t page_len;
index = pos >> PAGE_CACHE_SHIFT;
@@ -2305,6 +2433,13 @@
*/
if (pos + len > inode->i_size)
ext4_truncate_failed_write(inode);
+ } else {
+ page_len = pos & (PAGE_CACHE_SIZE - 1);
+ if (page_len > 0) {
+ ret = ext4_discard_partial_page_buffers_no_lock(handle,
+ inode, page, pos - page_len, page_len,
+ EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED);
+ }
}
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -2347,6 +2482,7 @@
loff_t new_i_size;
unsigned long start, end;
int write_mode = (int)(unsigned long)fsdata;
+ loff_t page_len;
if (write_mode == FALL_BACK_TO_NONDELALLOC) {
if (ext4_should_order_data(inode)) {
@@ -2395,6 +2531,16 @@
}
ret2 = generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
+
+ page_len = PAGE_CACHE_SIZE -
+ ((pos + copied - 1) & (PAGE_CACHE_SIZE - 1));
+
+ if (page_len > 0) {
+ ret = ext4_discard_partial_page_buffers_no_lock(handle,
+ inode, page, pos + copied - 1, page_len,
+ EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED);
+ }
+
copied = ret2;
if (ret2 < 0)
ret = ret2;
@@ -2689,10 +2835,7 @@
* but being more careful is always safe for the future change.
*/
inode = io_end->inode;
- if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
- io_end->flag |= EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- }
+ ext4_set_io_unwritten_flag(inode, io_end);
/* Add the io_end to per-inode completed io list*/
spin_lock_irqsave(&EXT4_I(inode)->i_completed_io_lock, flags);
@@ -2858,6 +3001,12 @@
struct inode *inode = file->f_mapping->host;
ssize_t ret;
+ /*
+ * If we are doing data journalling we don't support O_DIRECT
+ */
+ if (ext4_should_journal_data(inode))
+ return 0;
+
trace_ext4_direct_IO_enter(inode, offset, iov_length(iov, nr_segs), rw);
if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))
ret = ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs);
@@ -2927,6 +3076,7 @@
.bmap = ext4_bmap,
.invalidatepage = ext4_invalidatepage,
.releasepage = ext4_releasepage,
+ .direct_IO = ext4_direct_IO,
.is_partially_uptodate = block_is_partially_uptodate,
.error_remove_page = generic_error_remove_page,
};
@@ -2963,6 +3113,227 @@
inode->i_mapping->a_ops = &ext4_journalled_aops;
}
+
+/*
+ * ext4_discard_partial_page_buffers()
+ * Wrapper function for ext4_discard_partial_page_buffers_no_lock.
+ * This function finds and locks the page containing the offset
+ * "from" and passes it to ext4_discard_partial_page_buffers_no_lock.
+ * Calling functions that already have the page locked should call
+ * ext4_discard_partial_page_buffers_no_lock directly.
+ */
+int ext4_discard_partial_page_buffers(handle_t *handle,
+ struct address_space *mapping, loff_t from,
+ loff_t length, int flags)
+{
+ struct inode *inode = mapping->host;
+ struct page *page;
+ int err = 0;
+
+ page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
+ mapping_gfp_mask(mapping) & ~__GFP_FS);
+ if (!page)
+ return -ENOMEM;
+
+ err = ext4_discard_partial_page_buffers_no_lock(handle, inode, page,
+ from, length, flags);
+
+ unlock_page(page);
+ page_cache_release(page);
+ return err;
+}
+
+/*
+ * ext4_discard_partial_page_buffers_no_lock()
+ * Zeros a page range of length 'length' starting from offset 'from'.
+ * Buffer heads that correspond to the block aligned regions of the
+ * zeroed range will be unmapped. Unblock aligned regions
+ * will have the corresponding buffer head mapped if needed so that
+ * that region of the page can be updated with the partial zero out.
+ *
+ * This function assumes that the page has already been locked. The
+ * The range to be discarded must be contained with in the given page.
+ * If the specified range exceeds the end of the page it will be shortened
+ * to the end of the page that corresponds to 'from'. This function is
+ * appropriate for updating a page and it buffer heads to be unmapped and
+ * zeroed for blocks that have been either released, or are going to be
+ * released.
+ *
+ * handle: The journal handle
+ * inode: The files inode
+ * page: A locked page that contains the offset "from"
+ * from: The starting byte offset (from the begining of the file)
+ * to begin discarding
+ * len: The length of bytes to discard
+ * flags: Optional flags that may be used:
+ *
+ * EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED
+ * Only zero the regions of the page whose buffer heads
+ * have already been unmapped. This flag is appropriate
+ * for updateing the contents of a page whose blocks may
+ * have already been released, and we only want to zero
+ * out the regions that correspond to those released blocks.
+ *
+ * Returns zero on sucess or negative on failure.
+ */
+int ext4_discard_partial_page_buffers_no_lock(handle_t *handle,
+ struct inode *inode, struct page *page, loff_t from,
+ loff_t length, int flags)
+{
+ ext4_fsblk_t index = from >> PAGE_CACHE_SHIFT;
+ unsigned int offset = from & (PAGE_CACHE_SIZE-1);
+ unsigned int blocksize, max, pos;
+ ext4_lblk_t iblock;
+ struct buffer_head *bh;
+ int err = 0;
+
+ blocksize = inode->i_sb->s_blocksize;
+ max = PAGE_CACHE_SIZE - offset;
+
+ if (index != page->index)
+ return -EINVAL;
+
+ /*
+ * correct length if it does not fall between
+ * 'from' and the end of the page
+ */
+ if (length > max || length < 0)
+ length = max;
+
+ iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits);
+
+ if (!page_has_buffers(page)) {
+ /*
+ * If the range to be discarded covers a partial block
+ * we need to get the page buffers. This is because
+ * partial blocks cannot be released and the page needs
+ * to be updated with the contents of the block before
+ * we write the zeros on top of it.
+ */
+ if ((from & (blocksize - 1)) ||
+ ((from + length) & (blocksize - 1))) {
+ create_empty_buffers(page, blocksize, 0);
+ } else {
+ /*
+ * If there are no partial blocks,
+ * there is nothing to update,
+ * so we can return now
+ */
+ return 0;
+ }
+ }
+
+ /* Find the buffer that contains "offset" */
+ bh = page_buffers(page);
+ pos = blocksize;
+ while (offset >= pos) {
+ bh = bh->b_this_page;
+ iblock++;
+ pos += blocksize;
+ }
+
+ pos = offset;
+ while (pos < offset + length) {
+ unsigned int end_of_block, range_to_discard;
+
+ err = 0;
+
+ /* The length of space left to zero and unmap */
+ range_to_discard = offset + length - pos;
+
+ /* The length of space until the end of the block */
+ end_of_block = blocksize - (pos & (blocksize-1));
+
+ /*
+ * Do not unmap or zero past end of block
+ * for this buffer head
+ */
+ if (range_to_discard > end_of_block)
+ range_to_discard = end_of_block;
+
+
+ /*
+ * Skip this buffer head if we are only zeroing unampped
+ * regions of the page
+ */
+ if (flags & EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED &&
+ buffer_mapped(bh))
+ goto next;
+
+ /* If the range is block aligned, unmap */
+ if (range_to_discard == blocksize) {
+ clear_buffer_dirty(bh);
+ bh->b_bdev = NULL;
+ clear_buffer_mapped(bh);
+ clear_buffer_req(bh);
+ clear_buffer_new(bh);
+ clear_buffer_delay(bh);
+ clear_buffer_unwritten(bh);
+ clear_buffer_uptodate(bh);
+ zero_user(page, pos, range_to_discard);
+ BUFFER_TRACE(bh, "Buffer discarded");
+ goto next;
+ }
+
+ /*
+ * If this block is not completely contained in the range
+ * to be discarded, then it is not going to be released. Because
+ * we need to keep this block, we need to make sure this part
+ * of the page is uptodate before we modify it by writeing
+ * partial zeros on it.
+ */
+ if (!buffer_mapped(bh)) {
+ /*
+ * Buffer head must be mapped before we can read
+ * from the block
+ */
+ BUFFER_TRACE(bh, "unmapped");
+ ext4_get_block(inode, iblock, bh, 0);
+ /* unmapped? It's a hole - nothing to do */
+ if (!buffer_mapped(bh)) {
+ BUFFER_TRACE(bh, "still unmapped");
+ goto next;
+ }
+ }
+
+ /* Ok, it's mapped. Make sure it's up-to-date */
+ if (PageUptodate(page))
+ set_buffer_uptodate(bh);
+
+ if (!buffer_uptodate(bh)) {
+ err = -EIO;
+ ll_rw_block(READ, 1, &bh);
+ wait_on_buffer(bh);
+ /* Uhhuh. Read error. Complain and punt.*/
+ if (!buffer_uptodate(bh))
+ goto next;
+ }
+
+ if (ext4_should_journal_data(inode)) {
+ BUFFER_TRACE(bh, "get write access");
+ err = ext4_journal_get_write_access(handle, bh);
+ if (err)
+ goto next;
+ }
+
+ zero_user(page, pos, range_to_discard);
+
+ err = 0;
+ if (ext4_should_journal_data(inode)) {
+ err = ext4_handle_dirty_metadata(handle, inode, bh);
+ } else
+ mark_buffer_dirty(bh);
+
+ BUFFER_TRACE(bh, "Partial buffer zeroed");
+next:
+ bh = bh->b_this_page;
+ iblock++;
+ pos += range_to_discard;
+ }
+
+ return err;
+}
+
/*
* ext4_block_truncate_page() zeroes out a mapping from file offset `from'
* up to the end of the block which corresponds to `from'.
@@ -3005,7 +3376,7 @@
page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
mapping_gfp_mask(mapping) & ~__GFP_FS);
if (!page)
- return -EINVAL;
+ return -ENOMEM;
blocksize = inode->i_sb->s_blocksize;
max = blocksize - (offset & (blocksize - 1));
@@ -3074,11 +3445,8 @@
err = 0;
if (ext4_should_journal_data(inode)) {
err = ext4_handle_dirty_metadata(handle, inode, bh);
- } else {
- if (ext4_should_order_data(inode) && EXT4_I(inode)->jinode)
- err = ext4_jbd2_file_inode(handle, inode);
+ } else
mark_buffer_dirty(bh);
- }
unlock:
unlock_page(page);
@@ -3119,6 +3487,11 @@
return -ENOTSUPP;
}
+ if (EXT4_SB(inode->i_sb)->s_cluster_ratio > 1) {
+ /* TODO: Add support for bigalloc file systems */
+ return -ENOTSUPP;
+ }
+
return ext4_ext_punch_hole(file, offset, length);
}
@@ -3418,7 +3791,7 @@
inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16;
inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16;
}
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
ext4_clear_state_flags(ei); /* Only relevant on 32-bit archs */
ei->i_dir_start_lookup = 0;
@@ -4420,6 +4793,7 @@
PAGE_CACHE_SIZE, NULL, do_journal_get_write_access)) {
unlock_page(page);
ret = VM_FAULT_SIGBUS;
+ ext4_journal_stop(handle);
goto out;
}
ext4_set_inode_state(inode, EXT4_STATE_JDATA);
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index f18bfe3..a567968 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -21,6 +21,7 @@
long ext4_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
+ struct super_block *sb = inode->i_sb;
struct ext4_inode_info *ei = EXT4_I(inode);
unsigned int flags;
@@ -173,33 +174,8 @@
mnt_drop_write(filp->f_path.mnt);
return err;
}
-#ifdef CONFIG_JBD2_DEBUG
- case EXT4_IOC_WAIT_FOR_READONLY:
- /*
- * This is racy - by the time we're woken up and running,
- * the superblock could be released. And the module could
- * have been unloaded. So sue me.
- *
- * Returns 1 if it slept, else zero.
- */
- {
- struct super_block *sb = inode->i_sb;
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&EXT4_SB(sb)->ro_wait_queue, &wait);
- if (timer_pending(&EXT4_SB(sb)->turn_ro_timer)) {
- schedule();
- ret = 1;
- }
- remove_wait_queue(&EXT4_SB(sb)->ro_wait_queue, &wait);
- return ret;
- }
-#endif
case EXT4_IOC_GROUP_EXTEND: {
ext4_fsblk_t n_blocks_count;
- struct super_block *sb = inode->i_sb;
int err, err2=0;
err = ext4_resize_begin(sb);
@@ -209,6 +185,13 @@
if (get_user(n_blocks_count, (__u32 __user *)arg))
return -EFAULT;
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "Online resizing not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
@@ -250,6 +233,13 @@
goto mext_out;
}
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "Online defrag not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
err = mnt_want_write(filp->f_path.mnt);
if (err)
goto mext_out;
@@ -270,7 +260,6 @@
case EXT4_IOC_GROUP_ADD: {
struct ext4_new_group_data input;
- struct super_block *sb = inode->i_sb;
int err, err2=0;
err = ext4_resize_begin(sb);
@@ -281,6 +270,13 @@
sizeof(input)))
return -EFAULT;
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "Online resizing not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
@@ -337,7 +333,6 @@
case FITRIM:
{
- struct super_block *sb = inode->i_sb;
struct request_queue *q = bdev_get_queue(sb->s_bdev);
struct fstrim_range range;
int ret = 0;
@@ -348,7 +343,14 @@
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
- if (copy_from_user(&range, (struct fstrim_range *)arg,
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
+ ext4_msg(sb, KERN_ERR,
+ "FITRIM not supported with bigalloc");
+ return -EOPNOTSUPP;
+ }
+
+ if (copy_from_user(&range, (struct fstrim_range __user *)arg,
sizeof(range)))
return -EFAULT;
@@ -358,7 +360,7 @@
if (ret < 0)
return ret;
- if (copy_to_user((struct fstrim_range *)arg, &range,
+ if (copy_to_user((struct fstrim_range __user *)arg, &range,
sizeof(range)))
return -EFAULT;
@@ -396,11 +398,6 @@
case EXT4_IOC32_SETVERSION_OLD:
cmd = EXT4_IOC_SETVERSION_OLD;
break;
-#ifdef CONFIG_JBD2_DEBUG
- case EXT4_IOC32_WAIT_FOR_READONLY:
- cmd = EXT4_IOC_WAIT_FOR_READONLY;
- break;
-#endif
case EXT4_IOC32_GETRSVSZ:
cmd = EXT4_IOC_GETRSVSZ;
break;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 17a5a57..e2d8be8 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -70,8 +70,8 @@
*
* pa_lstart -> the logical start block for this prealloc space
* pa_pstart -> the physical start block for this prealloc space
- * pa_len -> length for this prealloc space
- * pa_free -> free space available in this prealloc space
+ * pa_len -> length for this prealloc space (in clusters)
+ * pa_free -> free space available in this prealloc space (in clusters)
*
* The inode preallocation space is used looking at the _logical_ start
* block. If only the logical file block falls within the range of prealloc
@@ -126,7 +126,8 @@
* list. In case of inode preallocation we follow a list of heuristics
* based on file size. This can be found in ext4_mb_normalize_request. If
* we are doing a group prealloc we try to normalize the request to
- * sbi->s_mb_group_prealloc. Default value of s_mb_group_prealloc is
+ * sbi->s_mb_group_prealloc. The default value of s_mb_group_prealloc is
+ * dependent on the cluster size; for non-bigalloc file systems, it is
* 512 blocks. This can be tuned via
* /sys/fs/ext4/<partition>/mb_group_prealloc. The value is represented in
* terms of number of blocks. If we have mounted the file system with -O
@@ -459,7 +460,7 @@
ext4_fsblk_t blocknr;
blocknr = ext4_group_first_block_no(sb, e4b->bd_group);
- blocknr += first + i;
+ blocknr += EXT4_C2B(EXT4_SB(sb), first + i);
ext4_grp_locked_error(sb, e4b->bd_group,
inode ? inode->i_ino : 0,
blocknr,
@@ -580,7 +581,7 @@
continue;
}
- /* both bits in buddy2 must be 0 */
+ /* both bits in buddy2 must be 1 */
MB_CHECK_ASSERT(mb_test_bit(i << 1, buddy2));
MB_CHECK_ASSERT(mb_test_bit((i << 1) + 1, buddy2));
@@ -653,7 +654,7 @@
ext4_grpblk_t chunk;
unsigned short border;
- BUG_ON(len > EXT4_BLOCKS_PER_GROUP(sb));
+ BUG_ON(len > EXT4_CLUSTERS_PER_GROUP(sb));
border = 2 << sb->s_blocksize_bits;
@@ -705,7 +706,7 @@
void *buddy, void *bitmap, ext4_group_t group)
{
struct ext4_group_info *grp = ext4_get_group_info(sb, group);
- ext4_grpblk_t max = EXT4_BLOCKS_PER_GROUP(sb);
+ ext4_grpblk_t max = EXT4_CLUSTERS_PER_GROUP(sb);
ext4_grpblk_t i = 0;
ext4_grpblk_t first;
ext4_grpblk_t len;
@@ -734,7 +735,7 @@
if (free != grp->bb_free) {
ext4_grp_locked_error(sb, group, 0, 0,
- "%u blocks in bitmap, %u in gd",
+ "%u clusters in bitmap, %u in gd",
free, grp->bb_free);
/*
* If we intent to continue, we consider group descritor
@@ -1339,7 +1340,7 @@
ext4_fsblk_t blocknr;
blocknr = ext4_group_first_block_no(sb, e4b->bd_group);
- blocknr += block;
+ blocknr += EXT4_C2B(EXT4_SB(sb), block);
ext4_grp_locked_error(sb, e4b->bd_group,
inode ? inode->i_ino : 0,
blocknr,
@@ -1390,7 +1391,6 @@
{
int next = block;
int max;
- int ord;
void *buddy;
assert_spin_locked(ext4_group_lock_ptr(e4b->bd_sb, e4b->bd_group));
@@ -1432,9 +1432,8 @@
if (mb_test_bit(next, EXT4_MB_BITMAP(e4b)))
break;
- ord = mb_find_order_for_block(e4b, next);
+ order = mb_find_order_for_block(e4b, next);
- order = ord;
block = next >> order;
ex->fe_len += 1 << order;
}
@@ -1624,8 +1623,8 @@
struct ext4_free_extent *gex = &ac->ac_g_ex;
BUG_ON(ex->fe_len <= 0);
- BUG_ON(ex->fe_len > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
- BUG_ON(ex->fe_start >= EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+ BUG_ON(ex->fe_len > EXT4_CLUSTERS_PER_GROUP(ac->ac_sb));
+ BUG_ON(ex->fe_start >= EXT4_CLUSTERS_PER_GROUP(ac->ac_sb));
BUG_ON(ac->ac_status != AC_STATUS_CONTINUE);
ac->ac_found++;
@@ -1823,15 +1822,15 @@
while (free && ac->ac_status == AC_STATUS_CONTINUE) {
i = mb_find_next_zero_bit(bitmap,
- EXT4_BLOCKS_PER_GROUP(sb), i);
- if (i >= EXT4_BLOCKS_PER_GROUP(sb)) {
+ EXT4_CLUSTERS_PER_GROUP(sb), i);
+ if (i >= EXT4_CLUSTERS_PER_GROUP(sb)) {
/*
* IF we have corrupt bitmap, we won't find any
* free blocks even though group info says we
* we have free blocks
*/
ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
- "%d free blocks as per "
+ "%d free clusters as per "
"group info. But bitmap says 0",
free);
break;
@@ -1841,7 +1840,7 @@
BUG_ON(ex.fe_len <= 0);
if (free < ex.fe_len) {
ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
- "%d free blocks as per "
+ "%d free clusters as per "
"group info. But got %d blocks",
free, ex.fe_len);
/*
@@ -1887,7 +1886,7 @@
do_div(a, sbi->s_stripe);
i = (a * sbi->s_stripe) - first_group_block;
- while (i < EXT4_BLOCKS_PER_GROUP(sb)) {
+ while (i < EXT4_CLUSTERS_PER_GROUP(sb)) {
if (!mb_test_bit(i, bitmap)) {
max = mb_find_extent(e4b, 0, i, sbi->s_stripe, &ex);
if (max >= sbi->s_stripe) {
@@ -2252,10 +2251,10 @@
*/
if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
meta_group_info[i]->bb_free =
- ext4_free_blocks_after_init(sb, group, desc);
+ ext4_free_clusters_after_init(sb, group, desc);
} else {
meta_group_info[i]->bb_free =
- ext4_free_blks_count(sb, desc);
+ ext4_free_group_clusters(sb, desc);
}
INIT_LIST_HEAD(&meta_group_info[i]->bb_prealloc_list);
@@ -2473,7 +2472,20 @@
sbi->s_mb_stats = MB_DEFAULT_STATS;
sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
- sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
+ /*
+ * The default group preallocation is 512, which for 4k block
+ * sizes translates to 2 megabytes. However for bigalloc file
+ * systems, this is probably too big (i.e, if the cluster size
+ * is 1 megabyte, then group preallocation size becomes half a
+ * gigabyte!). As a default, we will keep a two megabyte
+ * group pralloc size for cluster sizes up to 64k, and after
+ * that, we will force a minimum group preallocation size of
+ * 32 clusters. This translates to 8 megs when the cluster
+ * size is 256k, and 32 megs when the cluster size is 1 meg,
+ * which seems reasonable as a default.
+ */
+ sbi->s_mb_group_prealloc = max(MB_DEFAULT_GROUP_PREALLOC >>
+ sbi->s_cluster_bits, 32);
/*
* If there is a s_stripe > 1, then we set the s_mb_group_prealloc
* to the lowest multiple of s_stripe which is bigger than
@@ -2490,7 +2502,7 @@
sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group);
if (sbi->s_locality_groups == NULL) {
ret = -ENOMEM;
- goto out;
+ goto out_free_groupinfo_slab;
}
for_each_possible_cpu(i) {
struct ext4_locality_group *lg;
@@ -2503,9 +2515,8 @@
/* init file for buddy data */
ret = ext4_mb_init_backend(sb);
- if (ret != 0) {
- goto out;
- }
+ if (ret != 0)
+ goto out_free_locality_groups;
if (sbi->s_proc)
proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
@@ -2513,11 +2524,19 @@
if (sbi->s_journal)
sbi->s_journal->j_commit_callback = release_blocks_on_commit;
+
+ return 0;
+
+out_free_locality_groups:
+ free_percpu(sbi->s_locality_groups);
+ sbi->s_locality_groups = NULL;
+out_free_groupinfo_slab:
+ ext4_groupinfo_destroy_slabs();
out:
- if (ret) {
- kfree(sbi->s_mb_offsets);
- kfree(sbi->s_mb_maxs);
- }
+ kfree(sbi->s_mb_offsets);
+ sbi->s_mb_offsets = NULL;
+ kfree(sbi->s_mb_maxs);
+ sbi->s_mb_maxs = NULL;
return ret;
}
@@ -2602,11 +2621,13 @@
}
static inline int ext4_issue_discard(struct super_block *sb,
- ext4_group_t block_group, ext4_grpblk_t block, int count)
+ ext4_group_t block_group, ext4_grpblk_t cluster, int count)
{
ext4_fsblk_t discard_block;
- discard_block = block + ext4_group_first_block_no(sb, block_group);
+ discard_block = (EXT4_C2B(EXT4_SB(sb), cluster) +
+ ext4_group_first_block_no(sb, block_group));
+ count = EXT4_C2B(EXT4_SB(sb), count);
trace_ext4_discard_blocks(sb,
(unsigned long long) discard_block, count);
return sb_issue_discard(sb, discard_block, count, GFP_NOFS, 0);
@@ -2633,7 +2654,7 @@
if (test_opt(sb, DISCARD))
ext4_issue_discard(sb, entry->group,
- entry->start_blk, entry->count);
+ entry->start_cluster, entry->count);
err = ext4_mb_load_buddy(sb, entry->group, &e4b);
/* we expect to find existing buddy because it's pinned */
@@ -2646,7 +2667,7 @@
ext4_lock_group(sb, entry->group);
/* Take it out of per group rb tree */
rb_erase(&entry->node, &(db->bb_free_root));
- mb_free_blocks(NULL, &e4b, entry->start_blk, entry->count);
+ mb_free_blocks(NULL, &e4b, entry->start_cluster, entry->count);
/*
* Clear the trimmed flag for the group so that the next
@@ -2752,7 +2773,7 @@
*/
static noinline_for_stack int
ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac,
- handle_t *handle, unsigned int reserv_blks)
+ handle_t *handle, unsigned int reserv_clstrs)
{
struct buffer_head *bitmap_bh = NULL;
struct ext4_group_desc *gdp;
@@ -2783,7 +2804,7 @@
goto out_err;
ext4_debug("using block group %u(%d)\n", ac->ac_b_ex.fe_group,
- ext4_free_blks_count(sb, gdp));
+ ext4_free_group_clusters(sb, gdp));
err = ext4_journal_get_write_access(handle, gdp_bh);
if (err)
@@ -2791,7 +2812,7 @@
block = ext4_grp_offs_to_block(sb, &ac->ac_b_ex);
- len = ac->ac_b_ex.fe_len;
+ len = EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
if (!ext4_data_block_valid(sbi, block, len)) {
ext4_error(sb, "Allocating blocks %llu-%llu which overlap "
"fs metadata\n", block, block+len);
@@ -2823,28 +2844,29 @@
ac->ac_b_ex.fe_len);
if (gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT);
- ext4_free_blks_set(sb, gdp,
- ext4_free_blocks_after_init(sb,
- ac->ac_b_ex.fe_group, gdp));
+ ext4_free_group_clusters_set(sb, gdp,
+ ext4_free_clusters_after_init(sb,
+ ac->ac_b_ex.fe_group, gdp));
}
- len = ext4_free_blks_count(sb, gdp) - ac->ac_b_ex.fe_len;
- ext4_free_blks_set(sb, gdp, len);
+ len = ext4_free_group_clusters(sb, gdp) - ac->ac_b_ex.fe_len;
+ ext4_free_group_clusters_set(sb, gdp, len);
gdp->bg_checksum = ext4_group_desc_csum(sbi, ac->ac_b_ex.fe_group, gdp);
ext4_unlock_group(sb, ac->ac_b_ex.fe_group);
- percpu_counter_sub(&sbi->s_freeblocks_counter, ac->ac_b_ex.fe_len);
+ percpu_counter_sub(&sbi->s_freeclusters_counter, ac->ac_b_ex.fe_len);
/*
* Now reduce the dirty block count also. Should not go negative
*/
if (!(ac->ac_flags & EXT4_MB_DELALLOC_RESERVED))
/* release all the reserved blocks if non delalloc */
- percpu_counter_sub(&sbi->s_dirtyblocks_counter, reserv_blks);
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
+ reserv_clstrs);
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi,
ac->ac_b_ex.fe_group);
atomic_sub(ac->ac_b_ex.fe_len,
- &sbi->s_flex_groups[flex_group].free_blocks);
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
@@ -2886,6 +2908,7 @@
ext4_mb_normalize_request(struct ext4_allocation_context *ac,
struct ext4_allocation_request *ar)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
int bsbits, max;
ext4_lblk_t end;
loff_t size, orig_size, start_off;
@@ -2916,7 +2939,7 @@
/* first, let's learn actual file size
* given current request is allocated */
- size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
+ size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len);
size = size << bsbits;
if (size < i_size_read(ac->ac_inode))
size = i_size_read(ac->ac_inode);
@@ -2988,7 +3011,8 @@
continue;
}
- pa_end = pa->pa_lstart + pa->pa_len;
+ pa_end = pa->pa_lstart + EXT4_C2B(EXT4_SB(ac->ac_sb),
+ pa->pa_len);
/* PA must not overlap original request */
BUG_ON(!(ac->ac_o_ex.fe_logical >= pa_end ||
@@ -3018,9 +3042,11 @@
rcu_read_lock();
list_for_each_entry_rcu(pa, &ei->i_prealloc_list, pa_inode_list) {
ext4_lblk_t pa_end;
+
spin_lock(&pa->pa_lock);
if (pa->pa_deleted == 0) {
- pa_end = pa->pa_lstart + pa->pa_len;
+ pa_end = pa->pa_lstart + EXT4_C2B(EXT4_SB(ac->ac_sb),
+ pa->pa_len);
BUG_ON(!(start >= pa_end || end <= pa->pa_lstart));
}
spin_unlock(&pa->pa_lock);
@@ -3036,14 +3062,14 @@
}
BUG_ON(start + size <= ac->ac_o_ex.fe_logical &&
start > ac->ac_o_ex.fe_logical);
- BUG_ON(size <= 0 || size > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
+ BUG_ON(size <= 0 || size > EXT4_CLUSTERS_PER_GROUP(ac->ac_sb));
/* now prepare goal request */
/* XXX: is it better to align blocks WRT to logical
* placement or satisfy big request as is */
ac->ac_g_ex.fe_logical = start;
- ac->ac_g_ex.fe_len = size;
+ ac->ac_g_ex.fe_len = EXT4_NUM_B2C(sbi, size);
/* define goal start in order to merge */
if (ar->pright && (ar->lright == (start + size))) {
@@ -3112,14 +3138,16 @@
static void ext4_mb_use_inode_pa(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
ext4_fsblk_t start;
ext4_fsblk_t end;
int len;
/* found preallocated blocks, use them */
start = pa->pa_pstart + (ac->ac_o_ex.fe_logical - pa->pa_lstart);
- end = min(pa->pa_pstart + pa->pa_len, start + ac->ac_o_ex.fe_len);
- len = end - start;
+ end = min(pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len),
+ start + EXT4_C2B(sbi, ac->ac_o_ex.fe_len));
+ len = EXT4_NUM_B2C(sbi, end - start);
ext4_get_group_no_and_offset(ac->ac_sb, start, &ac->ac_b_ex.fe_group,
&ac->ac_b_ex.fe_start);
ac->ac_b_ex.fe_len = len;
@@ -3127,7 +3155,7 @@
ac->ac_pa = pa;
BUG_ON(start < pa->pa_pstart);
- BUG_ON(start + len > pa->pa_pstart + pa->pa_len);
+ BUG_ON(end > pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len));
BUG_ON(pa->pa_free < len);
pa->pa_free -= len;
@@ -3193,6 +3221,7 @@
static noinline_for_stack int
ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
int order, i;
struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
struct ext4_locality_group *lg;
@@ -3210,12 +3239,14 @@
/* all fields in this condition don't change,
* so we can skip locking for them */
if (ac->ac_o_ex.fe_logical < pa->pa_lstart ||
- ac->ac_o_ex.fe_logical >= pa->pa_lstart + pa->pa_len)
+ ac->ac_o_ex.fe_logical >= (pa->pa_lstart +
+ EXT4_C2B(sbi, pa->pa_len)))
continue;
/* non-extent files can't have physical blocks past 2^32 */
if (!(ext4_test_inode_flag(ac->ac_inode, EXT4_INODE_EXTENTS)) &&
- pa->pa_pstart + pa->pa_len > EXT4_MAX_BLOCK_FILE_PHYS)
+ (pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len) >
+ EXT4_MAX_BLOCK_FILE_PHYS))
continue;
/* found preallocated blocks, use them */
@@ -3291,7 +3322,7 @@
while (n) {
entry = rb_entry(n, struct ext4_free_data, node);
- ext4_set_bits(bitmap, entry->start_blk, entry->count);
+ ext4_set_bits(bitmap, entry->start_cluster, entry->count);
n = rb_next(n);
}
return;
@@ -3312,7 +3343,6 @@
ext4_group_t groupnr;
ext4_grpblk_t start;
int preallocated = 0;
- int count = 0;
int len;
/* all form of preallocation discards first load group,
@@ -3335,7 +3365,6 @@
BUG_ON(groupnr != group);
ext4_set_bits(bitmap, start, len);
preallocated += len;
- count++;
}
mb_debug(1, "prellocated %u for group %u\n", preallocated, group);
}
@@ -3412,6 +3441,7 @@
ext4_mb_new_inode_pa(struct ext4_allocation_context *ac)
{
struct super_block *sb = ac->ac_sb;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_prealloc_space *pa;
struct ext4_group_info *grp;
struct ext4_inode_info *ei;
@@ -3443,16 +3473,18 @@
winl = ac->ac_o_ex.fe_logical - ac->ac_g_ex.fe_logical;
/* also, we should cover whole original request */
- wins = ac->ac_b_ex.fe_len - ac->ac_o_ex.fe_len;
+ wins = EXT4_C2B(sbi, ac->ac_b_ex.fe_len - ac->ac_o_ex.fe_len);
/* the smallest one defines real window */
win = min(winl, wins);
- offs = ac->ac_o_ex.fe_logical % ac->ac_b_ex.fe_len;
+ offs = ac->ac_o_ex.fe_logical %
+ EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
if (offs && offs < win)
win = offs;
- ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical - win;
+ ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical -
+ EXT4_B2C(sbi, win);
BUG_ON(ac->ac_o_ex.fe_logical < ac->ac_b_ex.fe_logical);
BUG_ON(ac->ac_o_ex.fe_len > ac->ac_b_ex.fe_len);
}
@@ -3477,7 +3509,7 @@
trace_ext4_mb_new_inode_pa(ac, pa);
ext4_mb_use_inode_pa(ac, pa);
- atomic_add(pa->pa_free, &EXT4_SB(sb)->s_mb_preallocated);
+ atomic_add(pa->pa_free, &sbi->s_mb_preallocated);
ei = EXT4_I(ac->ac_inode);
grp = ext4_get_group_info(sb, ac->ac_b_ex.fe_group);
@@ -3592,7 +3624,7 @@
BUG_ON(pa->pa_deleted == 0);
ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
- grp_blk_start = pa->pa_pstart - bit;
+ grp_blk_start = pa->pa_pstart - EXT4_C2B(sbi, bit);
BUG_ON(group != e4b->bd_group && pa->pa_len != 0);
end = bit + pa->pa_len;
@@ -3607,7 +3639,8 @@
free += next - bit;
trace_ext4_mballoc_discard(sb, NULL, group, bit, next - bit);
- trace_ext4_mb_release_inode_pa(pa, grp_blk_start + bit,
+ trace_ext4_mb_release_inode_pa(pa, (grp_blk_start +
+ EXT4_C2B(sbi, bit)),
next - bit);
mb_free_blocks(pa->pa_inode, e4b, bit, next - bit);
bit = next + 1;
@@ -3690,7 +3723,7 @@
}
if (needed == 0)
- needed = EXT4_BLOCKS_PER_GROUP(sb) + 1;
+ needed = EXT4_CLUSTERS_PER_GROUP(sb) + 1;
INIT_LIST_HEAD(&list);
repeat:
@@ -3958,7 +3991,7 @@
if (unlikely(ac->ac_flags & EXT4_MB_HINT_GOAL_ONLY))
return;
- size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
+ size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len);
isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1)
>> bsbits;
@@ -3969,6 +4002,11 @@
return;
}
+ if (sbi->s_mb_group_prealloc <= 0) {
+ ac->ac_flags |= EXT4_MB_STREAM_ALLOC;
+ return;
+ }
+
/* don't use group allocation for large files */
size = max(size, isize);
if (size > sbi->s_mb_stream_request) {
@@ -4007,8 +4045,8 @@
len = ar->len;
/* just a dirty hack to filter too big requests */
- if (len >= EXT4_BLOCKS_PER_GROUP(sb) - 10)
- len = EXT4_BLOCKS_PER_GROUP(sb) - 10;
+ if (len >= EXT4_CLUSTERS_PER_GROUP(sb) - 10)
+ len = EXT4_CLUSTERS_PER_GROUP(sb) - 10;
/* start searching from the goal */
goal = ar->goal;
@@ -4019,18 +4057,15 @@
/* set up allocation goals */
memset(ac, 0, sizeof(struct ext4_allocation_context));
- ac->ac_b_ex.fe_logical = ar->logical;
+ ac->ac_b_ex.fe_logical = ar->logical & ~(sbi->s_cluster_ratio - 1);
ac->ac_status = AC_STATUS_CONTINUE;
ac->ac_sb = sb;
ac->ac_inode = ar->inode;
- ac->ac_o_ex.fe_logical = ar->logical;
+ ac->ac_o_ex.fe_logical = ac->ac_b_ex.fe_logical;
ac->ac_o_ex.fe_group = group;
ac->ac_o_ex.fe_start = block;
ac->ac_o_ex.fe_len = len;
- ac->ac_g_ex.fe_logical = ar->logical;
- ac->ac_g_ex.fe_group = group;
- ac->ac_g_ex.fe_start = block;
- ac->ac_g_ex.fe_len = len;
+ ac->ac_g_ex = ac->ac_o_ex;
ac->ac_flags = ar->flags;
/* we have to define context: we'll we work with a file or
@@ -4182,13 +4217,14 @@
*/
static int ext4_mb_release_context(struct ext4_allocation_context *ac)
{
+ struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
struct ext4_prealloc_space *pa = ac->ac_pa;
if (pa) {
if (pa->pa_type == MB_GROUP_PA) {
/* see comment in ext4_mb_use_group_pa() */
spin_lock(&pa->pa_lock);
- pa->pa_pstart += ac->ac_b_ex.fe_len;
- pa->pa_lstart += ac->ac_b_ex.fe_len;
+ pa->pa_pstart += EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
+ pa->pa_lstart += EXT4_C2B(sbi, ac->ac_b_ex.fe_len);
pa->pa_free -= ac->ac_b_ex.fe_len;
pa->pa_len -= ac->ac_b_ex.fe_len;
spin_unlock(&pa->pa_lock);
@@ -4249,13 +4285,17 @@
struct super_block *sb;
ext4_fsblk_t block = 0;
unsigned int inquota = 0;
- unsigned int reserv_blks = 0;
+ unsigned int reserv_clstrs = 0;
sb = ar->inode->i_sb;
sbi = EXT4_SB(sb);
trace_ext4_request_blocks(ar);
+ /* Allow to use superuser reservation for quota file */
+ if (IS_NOQUOTA(ar->inode))
+ ar->flags |= EXT4_MB_USE_ROOT_BLOCKS;
+
/*
* For delayed allocation, we could skip the ENOSPC and
* EDQUOT check, as blocks and quotas have been already
@@ -4269,7 +4309,7 @@
* and verify allocation doesn't exceed the quota limits.
*/
while (ar->len &&
- ext4_claim_free_blocks(sbi, ar->len, ar->flags)) {
+ ext4_claim_free_clusters(sbi, ar->len, ar->flags)) {
/* let others to free the space */
yield();
@@ -4279,12 +4319,14 @@
*errp = -ENOSPC;
return 0;
}
- reserv_blks = ar->len;
+ reserv_clstrs = ar->len;
if (ar->flags & EXT4_MB_USE_ROOT_BLOCKS) {
- dquot_alloc_block_nofail(ar->inode, ar->len);
+ dquot_alloc_block_nofail(ar->inode,
+ EXT4_C2B(sbi, ar->len));
} else {
while (ar->len &&
- dquot_alloc_block(ar->inode, ar->len)) {
+ dquot_alloc_block(ar->inode,
+ EXT4_C2B(sbi, ar->len))) {
ar->flags |= EXT4_MB_HINT_NOPREALLOC;
ar->len--;
@@ -4328,7 +4370,7 @@
ext4_mb_new_preallocation(ac);
}
if (likely(ac->ac_status == AC_STATUS_FOUND)) {
- *errp = ext4_mb_mark_diskspace_used(ac, handle, reserv_blks);
+ *errp = ext4_mb_mark_diskspace_used(ac, handle, reserv_clstrs);
if (*errp == -EAGAIN) {
/*
* drop the reference that we took
@@ -4364,13 +4406,13 @@
if (ac)
kmem_cache_free(ext4_ac_cachep, ac);
if (inquota && ar->len < inquota)
- dquot_free_block(ar->inode, inquota - ar->len);
+ dquot_free_block(ar->inode, EXT4_C2B(sbi, inquota - ar->len));
if (!ar->len) {
if (!ext4_test_inode_state(ar->inode,
EXT4_STATE_DELALLOC_RESERVED))
/* release all the reserved blocks if non delalloc */
- percpu_counter_sub(&sbi->s_dirtyblocks_counter,
- reserv_blks);
+ percpu_counter_sub(&sbi->s_dirtyclusters_counter,
+ reserv_clstrs);
}
trace_ext4_allocate_blocks(ar, (unsigned long long)block);
@@ -4388,7 +4430,7 @@
{
if ((entry1->t_tid == entry2->t_tid) &&
(entry1->group == entry2->group) &&
- ((entry1->start_blk + entry1->count) == entry2->start_blk))
+ ((entry1->start_cluster + entry1->count) == entry2->start_cluster))
return 1;
return 0;
}
@@ -4398,7 +4440,7 @@
struct ext4_free_data *new_entry)
{
ext4_group_t group = e4b->bd_group;
- ext4_grpblk_t block;
+ ext4_grpblk_t cluster;
struct ext4_free_data *entry;
struct ext4_group_info *db = e4b->bd_info;
struct super_block *sb = e4b->bd_sb;
@@ -4411,7 +4453,7 @@
BUG_ON(e4b->bd_buddy_page == NULL);
new_node = &new_entry->node;
- block = new_entry->start_blk;
+ cluster = new_entry->start_cluster;
if (!*n) {
/* first free block exent. We need to
@@ -4425,13 +4467,14 @@
while (*n) {
parent = *n;
entry = rb_entry(parent, struct ext4_free_data, node);
- if (block < entry->start_blk)
+ if (cluster < entry->start_cluster)
n = &(*n)->rb_left;
- else if (block >= (entry->start_blk + entry->count))
+ else if (cluster >= (entry->start_cluster + entry->count))
n = &(*n)->rb_right;
else {
ext4_grp_locked_error(sb, group, 0,
- ext4_group_first_block_no(sb, group) + block,
+ ext4_group_first_block_no(sb, group) +
+ EXT4_C2B(sbi, cluster),
"Block already on to-be-freed list");
return 0;
}
@@ -4445,7 +4488,7 @@
if (node) {
entry = rb_entry(node, struct ext4_free_data, node);
if (can_merge(entry, new_entry)) {
- new_entry->start_blk = entry->start_blk;
+ new_entry->start_cluster = entry->start_cluster;
new_entry->count += entry->count;
rb_erase(node, &(db->bb_free_root));
spin_lock(&sbi->s_md_lock);
@@ -4496,6 +4539,7 @@
ext4_group_t block_group;
struct ext4_sb_info *sbi;
struct ext4_buddy e4b;
+ unsigned int count_clusters;
int err = 0;
int ret;
@@ -4544,6 +4588,38 @@
if (!ext4_should_writeback_data(inode))
flags |= EXT4_FREE_BLOCKS_METADATA;
+ /*
+ * If the extent to be freed does not begin on a cluster
+ * boundary, we need to deal with partial clusters at the
+ * beginning and end of the extent. Normally we will free
+ * blocks at the beginning or the end unless we are explicitly
+ * requested to avoid doing so.
+ */
+ overflow = block & (sbi->s_cluster_ratio - 1);
+ if (overflow) {
+ if (flags & EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER) {
+ overflow = sbi->s_cluster_ratio - overflow;
+ block += overflow;
+ if (count > overflow)
+ count -= overflow;
+ else
+ return;
+ } else {
+ block -= overflow;
+ count += overflow;
+ }
+ }
+ overflow = count & (sbi->s_cluster_ratio - 1);
+ if (overflow) {
+ if (flags & EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER) {
+ if (count > overflow)
+ count -= overflow;
+ else
+ return;
+ } else
+ count += sbi->s_cluster_ratio - overflow;
+ }
+
do_more:
overflow = 0;
ext4_get_group_no_and_offset(sb, block, &block_group, &bit);
@@ -4552,10 +4628,12 @@
* Check to see if we are freeing blocks across a group
* boundary.
*/
- if (bit + count > EXT4_BLOCKS_PER_GROUP(sb)) {
- overflow = bit + count - EXT4_BLOCKS_PER_GROUP(sb);
+ if (EXT4_C2B(sbi, bit) + count > EXT4_BLOCKS_PER_GROUP(sb)) {
+ overflow = EXT4_C2B(sbi, bit) + count -
+ EXT4_BLOCKS_PER_GROUP(sb);
count -= overflow;
}
+ count_clusters = EXT4_B2C(sbi, count);
bitmap_bh = ext4_read_block_bitmap(sb, block_group);
if (!bitmap_bh) {
err = -EIO;
@@ -4570,9 +4648,9 @@
if (in_range(ext4_block_bitmap(sb, gdp), block, count) ||
in_range(ext4_inode_bitmap(sb, gdp), block, count) ||
in_range(block, ext4_inode_table(sb, gdp),
- EXT4_SB(sb)->s_itb_per_group) ||
+ EXT4_SB(sb)->s_itb_per_group) ||
in_range(block + count - 1, ext4_inode_table(sb, gdp),
- EXT4_SB(sb)->s_itb_per_group)) {
+ EXT4_SB(sb)->s_itb_per_group)) {
ext4_error(sb, "Freeing blocks in system zone - "
"Block = %llu, count = %lu", block, count);
@@ -4597,11 +4675,11 @@
#ifdef AGGRESSIVE_CHECK
{
int i;
- for (i = 0; i < count; i++)
+ for (i = 0; i < count_clusters; i++)
BUG_ON(!mb_test_bit(bit + i, bitmap_bh->b_data));
}
#endif
- trace_ext4_mballoc_free(sb, inode, block_group, bit, count);
+ trace_ext4_mballoc_free(sb, inode, block_group, bit, count_clusters);
err = ext4_mb_load_buddy(sb, block_group, &e4b);
if (err)
@@ -4618,13 +4696,13 @@
err = -ENOMEM;
goto error_return;
}
- new_entry->start_blk = bit;
+ new_entry->start_cluster = bit;
new_entry->group = block_group;
- new_entry->count = count;
+ new_entry->count = count_clusters;
new_entry->t_tid = handle->h_transaction->t_tid;
ext4_lock_group(sb, block_group);
- mb_clear_bits(bitmap_bh->b_data, bit, count);
+ mb_clear_bits(bitmap_bh->b_data, bit, count_clusters);
ext4_mb_free_metadata(handle, &e4b, new_entry);
} else {
/* need to update group_info->bb_free and bitmap
@@ -4632,25 +4710,29 @@
* them with group lock_held
*/
ext4_lock_group(sb, block_group);
- mb_clear_bits(bitmap_bh->b_data, bit, count);
- mb_free_blocks(inode, &e4b, bit, count);
+ mb_clear_bits(bitmap_bh->b_data, bit, count_clusters);
+ mb_free_blocks(inode, &e4b, bit, count_clusters);
}
- ret = ext4_free_blks_count(sb, gdp) + count;
- ext4_free_blks_set(sb, gdp, ret);
+ ret = ext4_free_group_clusters(sb, gdp) + count_clusters;
+ ext4_free_group_clusters_set(sb, gdp, ret);
gdp->bg_checksum = ext4_group_desc_csum(sbi, block_group, gdp);
ext4_unlock_group(sb, block_group);
- percpu_counter_add(&sbi->s_freeblocks_counter, count);
+ percpu_counter_add(&sbi->s_freeclusters_counter, count_clusters);
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(count, &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(count_clusters,
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
freed += count;
+ if (!(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
+ dquot_free_block(inode, EXT4_C2B(sbi, count_clusters));
+
/* We dirtied the bitmap block */
BUFFER_TRACE(bitmap_bh, "dirtied bitmap block");
err = ext4_handle_dirty_metadata(handle, NULL, bitmap_bh);
@@ -4669,8 +4751,6 @@
}
ext4_mark_super_dirty(sb);
error_return:
- if (freed && !(flags & EXT4_FREE_BLOCKS_NO_QUOT_UPDATE))
- dquot_free_block(inode, freed);
brelse(bitmap_bh);
ext4_std_error(sb, err);
return;
@@ -4778,16 +4858,17 @@
ext4_lock_group(sb, block_group);
mb_clear_bits(bitmap_bh->b_data, bit, count);
mb_free_blocks(NULL, &e4b, bit, count);
- blk_free_count = blocks_freed + ext4_free_blks_count(sb, desc);
- ext4_free_blks_set(sb, desc, blk_free_count);
+ blk_free_count = blocks_freed + ext4_free_group_clusters(sb, desc);
+ ext4_free_group_clusters_set(sb, desc, blk_free_count);
desc->bg_checksum = ext4_group_desc_csum(sbi, block_group, desc);
ext4_unlock_group(sb, block_group);
- percpu_counter_add(&sbi->s_freeblocks_counter, blocks_freed);
+ percpu_counter_add(&sbi->s_freeclusters_counter,
+ EXT4_B2C(sbi, blocks_freed));
if (sbi->s_log_groups_per_flex) {
ext4_group_t flex_group = ext4_flex_group(sbi, block_group);
- atomic_add(blocks_freed,
- &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(EXT4_B2C(sbi, blocks_freed),
+ &sbi->s_flex_groups[flex_group].free_clusters);
}
ext4_mb_unload_buddy(&e4b);
@@ -4948,7 +5029,7 @@
struct ext4_group_info *grp;
ext4_group_t first_group, last_group;
ext4_group_t group, ngroups = ext4_get_groups_count(sb);
- ext4_grpblk_t cnt = 0, first_block, last_block;
+ ext4_grpblk_t cnt = 0, first_cluster, last_cluster;
uint64_t start, len, minlen, trimmed = 0;
ext4_fsblk_t first_data_blk =
le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block);
@@ -4958,7 +5039,7 @@
len = range->len >> sb->s_blocksize_bits;
minlen = range->minlen >> sb->s_blocksize_bits;
- if (unlikely(minlen > EXT4_BLOCKS_PER_GROUP(sb)))
+ if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)))
return -EINVAL;
if (start + len <= first_data_blk)
goto out;
@@ -4969,11 +5050,11 @@
/* Determine first and last group to examine based on start and len */
ext4_get_group_no_and_offset(sb, (ext4_fsblk_t) start,
- &first_group, &first_block);
+ &first_group, &first_cluster);
ext4_get_group_no_and_offset(sb, (ext4_fsblk_t) (start + len),
- &last_group, &last_block);
+ &last_group, &last_cluster);
last_group = (last_group > ngroups - 1) ? ngroups - 1 : last_group;
- last_block = EXT4_BLOCKS_PER_GROUP(sb);
+ last_cluster = EXT4_CLUSTERS_PER_GROUP(sb);
if (first_group > last_group)
return -EINVAL;
@@ -4993,20 +5074,20 @@
* change it for the last group in which case start +
* len < EXT4_BLOCKS_PER_GROUP(sb).
*/
- if (first_block + len < EXT4_BLOCKS_PER_GROUP(sb))
- last_block = first_block + len;
- len -= last_block - first_block;
+ if (first_cluster + len < EXT4_CLUSTERS_PER_GROUP(sb))
+ last_cluster = first_cluster + len;
+ len -= last_cluster - first_cluster;
if (grp->bb_free >= minlen) {
- cnt = ext4_trim_all_free(sb, group, first_block,
- last_block, minlen);
+ cnt = ext4_trim_all_free(sb, group, first_cluster,
+ last_cluster, minlen);
if (cnt < 0) {
ret = cnt;
break;
}
}
trimmed += cnt;
- first_block = 0;
+ first_cluster = 0;
}
range->len = trimmed * sb->s_blocksize;
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index 9d4a636..47705f3 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -106,7 +106,7 @@
ext4_group_t group;
/* free block extent */
- ext4_grpblk_t start_blk;
+ ext4_grpblk_t start_cluster;
ext4_grpblk_t count;
/* transaction which freed this extent */
@@ -139,9 +139,9 @@
struct ext4_free_extent {
ext4_lblk_t fe_logical;
- ext4_grpblk_t fe_start;
+ ext4_grpblk_t fe_start; /* In cluster units */
ext4_group_t fe_group;
- ext4_grpblk_t fe_len;
+ ext4_grpblk_t fe_len; /* In cluster units */
};
/*
@@ -175,7 +175,7 @@
/* the best found extent */
struct ext4_free_extent ac_b_ex;
- /* copy of the bext found extent taken before preallocation efforts */
+ /* copy of the best found extent taken before preallocation efforts */
struct ext4_free_extent ac_f_ex;
/* number of iterations done. we have to track to limit searching */
@@ -216,6 +216,7 @@
static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
struct ext4_free_extent *fex)
{
- return ext4_group_first_block_no(sb, fex->fe_group) + fex->fe_start;
+ return ext4_group_first_block_no(sb, fex->fe_group) +
+ (fex->fe_start << EXT4_SB(sb)->s_cluster_bits);
}
#endif
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index b57b98f..16ac228 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -15,19 +15,18 @@
#include <linux/module.h>
#include <linux/slab.h>
#include "ext4_jbd2.h"
-#include "ext4_extents.h"
/*
* The contiguous blocks details which can be
* represented by a single extent
*/
-struct list_blocks_struct {
- ext4_lblk_t first_block, last_block;
+struct migrate_struct {
+ ext4_lblk_t first_block, last_block, curr_block;
ext4_fsblk_t first_pblock, last_pblock;
};
static int finish_range(handle_t *handle, struct inode *inode,
- struct list_blocks_struct *lb)
+ struct migrate_struct *lb)
{
int retval = 0, needed;
@@ -87,8 +86,7 @@
}
static int update_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t blk_num,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock, struct migrate_struct *lb)
{
int retval;
/*
@@ -96,9 +94,10 @@
*/
if (lb->first_pblock &&
(lb->last_pblock+1 == pblock) &&
- (lb->last_block+1 == blk_num)) {
+ (lb->last_block+1 == lb->curr_block)) {
lb->last_pblock = pblock;
- lb->last_block = blk_num;
+ lb->last_block = lb->curr_block;
+ lb->curr_block++;
return 0;
}
/*
@@ -106,64 +105,49 @@
*/
retval = finish_range(handle, inode, lb);
lb->first_pblock = lb->last_pblock = pblock;
- lb->first_block = lb->last_block = blk_num;
-
+ lb->first_block = lb->last_block = lb->curr_block;
+ lb->curr_block++;
return retval;
}
static int update_ind_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t *blk_nump,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock,
+ struct migrate_struct *lb)
{
struct buffer_head *bh;
__le32 *i_data;
int i, retval = 0;
- ext4_lblk_t blk_count = *blk_nump;
unsigned long max_entries = inode->i_sb->s_blocksize >> 2;
- if (!pblock) {
- /* Only update the file block number */
- *blk_nump += max_entries;
- return 0;
- }
-
bh = sb_bread(inode->i_sb, pblock);
if (!bh)
return -EIO;
i_data = (__le32 *)bh->b_data;
- for (i = 0; i < max_entries; i++, blk_count++) {
+ for (i = 0; i < max_entries; i++) {
if (i_data[i]) {
retval = update_extent_range(handle, inode,
- le32_to_cpu(i_data[i]),
- blk_count, lb);
+ le32_to_cpu(i_data[i]), lb);
if (retval)
break;
+ } else {
+ lb->curr_block++;
}
}
-
- /* Update the file block number */
- *blk_nump = blk_count;
put_bh(bh);
return retval;
}
static int update_dind_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t *blk_nump,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock,
+ struct migrate_struct *lb)
{
struct buffer_head *bh;
__le32 *i_data;
int i, retval = 0;
- ext4_lblk_t blk_count = *blk_nump;
unsigned long max_entries = inode->i_sb->s_blocksize >> 2;
- if (!pblock) {
- /* Only update the file block number */
- *blk_nump += max_entries * max_entries;
- return 0;
- }
bh = sb_bread(inode->i_sb, pblock);
if (!bh)
return -EIO;
@@ -172,38 +156,28 @@
for (i = 0; i < max_entries; i++) {
if (i_data[i]) {
retval = update_ind_extent_range(handle, inode,
- le32_to_cpu(i_data[i]),
- &blk_count, lb);
+ le32_to_cpu(i_data[i]), lb);
if (retval)
break;
} else {
/* Only update the file block number */
- blk_count += max_entries;
+ lb->curr_block += max_entries;
}
}
-
- /* Update the file block number */
- *blk_nump = blk_count;
put_bh(bh);
return retval;
}
static int update_tind_extent_range(handle_t *handle, struct inode *inode,
- ext4_fsblk_t pblock, ext4_lblk_t *blk_nump,
- struct list_blocks_struct *lb)
+ ext4_fsblk_t pblock,
+ struct migrate_struct *lb)
{
struct buffer_head *bh;
__le32 *i_data;
int i, retval = 0;
- ext4_lblk_t blk_count = *blk_nump;
unsigned long max_entries = inode->i_sb->s_blocksize >> 2;
- if (!pblock) {
- /* Only update the file block number */
- *blk_nump += max_entries * max_entries * max_entries;
- return 0;
- }
bh = sb_bread(inode->i_sb, pblock);
if (!bh)
return -EIO;
@@ -212,16 +186,14 @@
for (i = 0; i < max_entries; i++) {
if (i_data[i]) {
retval = update_dind_extent_range(handle, inode,
- le32_to_cpu(i_data[i]),
- &blk_count, lb);
+ le32_to_cpu(i_data[i]), lb);
if (retval)
break;
- } else
+ } else {
/* Only update the file block number */
- blk_count += max_entries * max_entries;
+ lb->curr_block += max_entries * max_entries;
+ }
}
- /* Update the file block number */
- *blk_nump = blk_count;
put_bh(bh);
return retval;
@@ -462,12 +434,12 @@
handle_t *handle;
int retval = 0, i;
__le32 *i_data;
- ext4_lblk_t blk_count = 0;
struct ext4_inode_info *ei;
struct inode *tmp_inode = NULL;
- struct list_blocks_struct lb;
+ struct migrate_struct lb;
unsigned long max_entries;
__u32 goal;
+ uid_t owner[2];
/*
* If the filesystem does not support extents, or the inode
@@ -495,10 +467,12 @@
}
goal = (((inode->i_ino - 1) / EXT4_INODES_PER_GROUP(inode->i_sb)) *
EXT4_INODES_PER_GROUP(inode->i_sb)) + 1;
+ owner[0] = inode->i_uid;
+ owner[1] = inode->i_gid;
tmp_inode = ext4_new_inode(handle, inode->i_sb->s_root->d_inode,
- S_IFREG, NULL, goal);
+ S_IFREG, NULL, goal, owner);
if (IS_ERR(tmp_inode)) {
- retval = -ENOMEM;
+ retval = PTR_ERR(inode);
ext4_journal_stop(handle);
return retval;
}
@@ -507,7 +481,7 @@
* Set the i_nlink to zero so it will be deleted later
* when we drop inode reference.
*/
- tmp_inode->i_nlink = 0;
+ clear_nlink(tmp_inode);
ext4_ext_tree_init(handle, tmp_inode);
ext4_orphan_add(handle, tmp_inode);
@@ -551,35 +525,32 @@
/* 32 bit block address 4 bytes */
max_entries = inode->i_sb->s_blocksize >> 2;
- for (i = 0; i < EXT4_NDIR_BLOCKS; i++, blk_count++) {
+ for (i = 0; i < EXT4_NDIR_BLOCKS; i++) {
if (i_data[i]) {
retval = update_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[i]),
- blk_count, &lb);
+ le32_to_cpu(i_data[i]), &lb);
if (retval)
goto err_out;
- }
+ } else
+ lb.curr_block++;
}
if (i_data[EXT4_IND_BLOCK]) {
retval = update_ind_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[EXT4_IND_BLOCK]),
- &blk_count, &lb);
+ le32_to_cpu(i_data[EXT4_IND_BLOCK]), &lb);
if (retval)
goto err_out;
} else
- blk_count += max_entries;
+ lb.curr_block += max_entries;
if (i_data[EXT4_DIND_BLOCK]) {
retval = update_dind_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[EXT4_DIND_BLOCK]),
- &blk_count, &lb);
+ le32_to_cpu(i_data[EXT4_DIND_BLOCK]), &lb);
if (retval)
goto err_out;
} else
- blk_count += max_entries * max_entries;
+ lb.curr_block += max_entries * max_entries;
if (i_data[EXT4_TIND_BLOCK]) {
retval = update_tind_extent_range(handle, tmp_inode,
- le32_to_cpu(i_data[EXT4_TIND_BLOCK]),
- &blk_count, &lb);
+ le32_to_cpu(i_data[EXT4_TIND_BLOCK]), &lb);
if (retval)
goto err_out;
}
diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c
index 9bdef3f..7ea4ba4 100644
--- a/fs/ext4/mmp.c
+++ b/fs/ext4/mmp.c
@@ -109,7 +109,7 @@
mmp->mmp_check_interval = cpu_to_le16(mmp_check_interval);
bdevname(bh->b_bdev, mmp->mmp_bdevname);
- memcpy(mmp->mmp_nodename, init_utsname()->sysname,
+ memcpy(mmp->mmp_nodename, init_utsname()->nodename,
sizeof(mmp->mmp_nodename));
while (!kthread_should_stop()) {
@@ -125,8 +125,9 @@
* Don't spew too many error messages. Print one every
* (s_mmp_update_interval * 60) seconds.
*/
- if (retval && (failed_writes % 60) == 0) {
- ext4_error(sb, "Error writing to MMP block");
+ if (retval) {
+ if ((failed_writes % 60) == 0)
+ ext4_error(sb, "Error writing to MMP block");
failed_writes++;
}
@@ -295,7 +296,8 @@
/*
* write a new random sequence number.
*/
- mmp->mmp_seq = seq = cpu_to_le32(mmp_new_seq());
+ seq = mmp_new_seq();
+ mmp->mmp_seq = cpu_to_le32(seq);
retval = write_mmp_block(bh);
if (retval)
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index f57455a..c5826c6 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -17,7 +17,6 @@
#include <linux/quotaops.h>
#include <linux/slab.h>
#include "ext4_jbd2.h"
-#include "ext4_extents.h"
#include "ext4.h"
/**
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 1c924fa..aa4c782 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1586,7 +1586,7 @@
dxtrace(dx_show_index("node", frames[1].entries));
dxtrace(dx_show_index("node",
((struct dx_node *) bh2->b_data)->entries));
- err = ext4_handle_dirty_metadata(handle, inode, bh2);
+ err = ext4_handle_dirty_metadata(handle, dir, bh2);
if (err)
goto journal_error;
brelse (bh2);
@@ -1612,7 +1612,7 @@
if (err)
goto journal_error;
}
- err = ext4_handle_dirty_metadata(handle, inode, frames[0].bh);
+ err = ext4_handle_dirty_metadata(handle, dir, frames[0].bh);
if (err) {
ext4_std_error(inode->i_sb, err);
goto cleanup;
@@ -1694,7 +1694,7 @@
if (is_dx(inode) && inode->i_nlink > 1) {
/* limit is 16-bit i_links_count */
if (inode->i_nlink >= EXT4_LINK_MAX || inode->i_nlink == 2) {
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
EXT4_SET_RO_COMPAT_FEATURE(inode->i_sb,
EXT4_FEATURE_RO_COMPAT_DIR_NLINK);
}
@@ -1707,9 +1707,8 @@
*/
static void ext4_dec_count(handle_t *handle, struct inode *inode)
{
- drop_nlink(inode);
- if (S_ISDIR(inode->i_mode) && inode->i_nlink == 0)
- inc_nlink(inode);
+ if (!S_ISDIR(inode->i_mode) || inode->i_nlink > 2)
+ drop_nlink(inode);
}
@@ -1756,7 +1755,7 @@
if (IS_DIRSYNC(dir))
ext4_handle_sync(handle);
- inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0);
+ inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
inode->i_op = &ext4_file_inode_operations;
@@ -1792,7 +1791,7 @@
if (IS_DIRSYNC(dir))
ext4_handle_sync(handle);
- inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0);
+ inode = ext4_new_inode(handle, dir, mode, &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
init_special_inode(inode, inode->i_mode, rdev);
@@ -1832,7 +1831,7 @@
ext4_handle_sync(handle);
inode = ext4_new_inode(handle, dir, S_IFDIR | mode,
- &dentry->d_name, 0);
+ &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_stop;
@@ -1861,9 +1860,9 @@
de->name_len = 2;
strcpy(de->name, "..");
ext4_set_de_type(dir->i_sb, de, S_IFDIR);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
BUFFER_TRACE(dir_block, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, dir, dir_block);
+ err = ext4_handle_dirty_metadata(handle, inode, dir_block);
if (err)
goto out_clear_inode;
err = ext4_mark_inode_dirty(handle, inode);
@@ -2214,7 +2213,7 @@
ext4_warning(inode->i_sb,
"Deleting nonexistent file (%lu), %d",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
retval = ext4_delete_entry(handle, dir, de, bh);
if (retval)
@@ -2279,7 +2278,7 @@
ext4_handle_sync(handle);
inode = ext4_new_inode(handle, dir, S_IFLNK|S_IRWXUGO,
- &dentry->d_name, 0);
+ &dentry->d_name, 0, NULL);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_stop;
@@ -2530,7 +2529,7 @@
PARENT_INO(dir_bh->b_data, new_dir->i_sb->s_blocksize) =
cpu_to_le32(new_dir->i_ino);
BUFFER_TRACE(dir_bh, "call ext4_handle_dirty_metadata");
- retval = ext4_handle_dirty_metadata(handle, old_dir, dir_bh);
+ retval = ext4_handle_dirty_metadata(handle, old_inode, dir_bh);
if (retval) {
ext4_std_error(old_dir->i_sb, retval);
goto end_rename;
@@ -2539,7 +2538,7 @@
if (new_inode) {
/* checked empty_dir above, can't have another parent,
* ext4_dec_count() won't work for many-linked dirs */
- new_inode->i_nlink = 0;
+ clear_nlink(new_inode);
} else {
ext4_inc_count(handle, new_dir);
ext4_update_dx_flag(new_dir);
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index 92f38ee..7ce1d0b 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -70,7 +70,6 @@
void ext4_free_io_end(ext4_io_end_t *io)
{
int i;
- wait_queue_head_t *wq;
BUG_ON(!io);
if (io->page)
@@ -78,56 +77,43 @@
for (i = 0; i < io->num_io_pages; i++)
put_io_page(io->pages[i]);
io->num_io_pages = 0;
- wq = ext4_ioend_wq(io->inode);
- if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count) &&
- waitqueue_active(wq))
- wake_up_all(wq);
+ if (atomic_dec_and_test(&EXT4_I(io->inode)->i_ioend_count))
+ wake_up_all(ext4_ioend_wq(io->inode));
kmem_cache_free(io_end_cachep, io);
}
/*
* check a range of space and convert unwritten extents to written.
+ *
+ * Called with inode->i_mutex; we depend on this when we manipulate
+ * io->flag, since we could otherwise race with ext4_flush_completed_IO()
*/
int ext4_end_io_nolock(ext4_io_end_t *io)
{
struct inode *inode = io->inode;
loff_t offset = io->offset;
ssize_t size = io->size;
- wait_queue_head_t *wq;
int ret = 0;
ext4_debug("ext4_end_io_nolock: io 0x%p from inode %lu,list->next 0x%p,"
"list->prev 0x%p\n",
io, inode->i_ino, io->list.next, io->list.prev);
- if (list_empty(&io->list))
- return ret;
-
- if (!(io->flag & EXT4_IO_END_UNWRITTEN))
- return ret;
-
ret = ext4_convert_unwritten_extents(inode, offset, size);
if (ret < 0) {
- printk(KERN_EMERG "%s: failed to convert unwritten "
- "extents to written extents, error is %d "
- "io is still on inode %lu aio dio list\n",
- __func__, ret, inode->i_ino);
- return ret;
+ ext4_msg(inode->i_sb, KERN_EMERG,
+ "failed to convert unwritten extents to written "
+ "extents -- potential data loss! "
+ "(inode %lu, offset %llu, size %zd, error %d)",
+ inode->i_ino, offset, size, ret);
}
if (io->iocb)
aio_complete(io->iocb, io->result, 0);
- /* clear the DIO AIO unwritten flag */
- if (io->flag & EXT4_IO_END_UNWRITTEN) {
- io->flag &= ~EXT4_IO_END_UNWRITTEN;
- /* Wake up anyone waiting on unwritten extent conversion */
- wq = ext4_ioend_wq(io->inode);
- if (atomic_dec_and_test(&EXT4_I(inode)->i_aiodio_unwritten) &&
- waitqueue_active(wq)) {
- wake_up_all(wq);
- }
- }
+ /* Wake up anyone waiting on unwritten extent conversion */
+ if (atomic_dec_and_test(&EXT4_I(inode)->i_aiodio_unwritten))
+ wake_up_all(ext4_ioend_wq(io->inode));
return ret;
}
@@ -140,9 +126,15 @@
struct inode *inode = io->inode;
struct ext4_inode_info *ei = EXT4_I(inode);
unsigned long flags;
- int ret;
+
+ spin_lock_irqsave(&ei->i_completed_io_lock, flags);
+ if (list_empty(&io->list)) {
+ spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
+ goto free;
+ }
if (!mutex_trylock(&inode->i_mutex)) {
+ spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
/*
* Requeue the work instead of waiting so that the work
* items queued after this can be processed.
@@ -159,17 +151,11 @@
io->flag |= EXT4_IO_END_QUEUED;
return;
}
- ret = ext4_end_io_nolock(io);
- if (ret < 0) {
- mutex_unlock(&inode->i_mutex);
- return;
- }
-
- spin_lock_irqsave(&ei->i_completed_io_lock, flags);
- if (!list_empty(&io->list))
- list_del_init(&io->list);
+ list_del_init(&io->list);
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
+ (void) ext4_end_io_nolock(io);
mutex_unlock(&inode->i_mutex);
+free:
ext4_free_io_end(io);
}
@@ -350,10 +336,8 @@
if ((io_end->num_io_pages >= MAX_IO_PAGES) &&
(io_end->pages[io_end->num_io_pages-1] != io_page))
goto submit_and_retry;
- if (buffer_uninit(bh) && !(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
- io_end->flag |= EXT4_IO_END_UNWRITTEN;
- atomic_inc(&EXT4_I(inode)->i_aiodio_unwritten);
- }
+ if (buffer_uninit(bh))
+ ext4_set_io_unwritten_flag(inode, io_end);
io->io_end->size += bh->b_size;
io->io_next_block++;
ret = bio_add_page(io->io_bio, bh->b_page, bh->b_size, bh_offset(bh));
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 707d3f1..996780a 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -875,7 +875,7 @@
ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */
ext4_inode_table_set(sb, gdp, input->inode_table); /* LV FIXME */
- ext4_free_blks_set(sb, gdp, input->free_blocks_count);
+ ext4_free_group_clusters_set(sb, gdp, input->free_blocks_count);
ext4_free_inodes_set(sb, gdp, EXT4_INODES_PER_GROUP(sb));
gdp->bg_flags = cpu_to_le16(EXT4_BG_INODE_ZEROED);
gdp->bg_checksum = ext4_group_desc_csum(sbi, input->group, gdp);
@@ -937,8 +937,8 @@
input->reserved_blocks);
/* Update the free space counts */
- percpu_counter_add(&sbi->s_freeblocks_counter,
- input->free_blocks_count);
+ percpu_counter_add(&sbi->s_freeclusters_counter,
+ EXT4_B2C(sbi, input->free_blocks_count));
percpu_counter_add(&sbi->s_freeinodes_counter,
EXT4_INODES_PER_GROUP(sb));
@@ -946,8 +946,8 @@
sbi->s_log_groups_per_flex) {
ext4_group_t flex_group;
flex_group = ext4_flex_group(sbi, input->group);
- atomic_add(input->free_blocks_count,
- &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(EXT4_B2C(sbi, input->free_blocks_count),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(EXT4_INODES_PER_GROUP(sb),
&sbi->s_flex_groups[flex_group].free_inodes);
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 44d0c8d..9953d80 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -45,6 +45,7 @@
#include <linux/freezer.h>
#include "ext4.h"
+#include "ext4_extents.h"
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
@@ -163,8 +164,8 @@
(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_table_hi) << 32 : 0);
}
-__u32 ext4_free_blks_count(struct super_block *sb,
- struct ext4_group_desc *bg)
+__u32 ext4_free_group_clusters(struct super_block *sb,
+ struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_free_blocks_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
@@ -219,8 +220,8 @@
bg->bg_inode_table_hi = cpu_to_le32(blk >> 32);
}
-void ext4_free_blks_set(struct super_block *sb,
- struct ext4_group_desc *bg, __u32 count)
+void ext4_free_group_clusters_set(struct super_block *sb,
+ struct ext4_group_desc *bg, __u32 count)
{
bg->bg_free_blocks_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
@@ -414,6 +415,22 @@
ext4_commit_super(sb, 1);
}
+/*
+ * The del_gendisk() function uninitializes the disk-specific data
+ * structures, including the bdi structure, without telling anyone
+ * else. Once this happens, any attempt to call mark_buffer_dirty()
+ * (for example, by ext4_commit_super), will cause a kernel OOPS.
+ * This is a kludge to prevent these oops until we can put in a proper
+ * hook in del_gendisk() to inform the VFS and file system layers.
+ */
+static int block_device_ejected(struct super_block *sb)
+{
+ struct inode *bd_inode = sb->s_bdev->bd_inode;
+ struct backing_dev_info *bdi = bd_inode->i_mapping->backing_dev_info;
+
+ return bdi->dev == NULL;
+}
+
/* Deal with the reporting of failure conditions on a filesystem such as
* inconsistencies detected or read IO failures.
@@ -821,10 +838,10 @@
brelse(sbi->s_group_desc[i]);
ext4_kvfree(sbi->s_group_desc);
ext4_kvfree(sbi->s_flex_groups);
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
+ percpu_counter_destroy(&sbi->s_freeclusters_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
- percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
+ percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
brelse(sbi->s_sbh);
#ifdef CONFIG_QUOTA
for (i = 0; i < MAXQUOTAS; i++)
@@ -1057,8 +1074,6 @@
seq_puts(seq, ",nouid32");
if (test_opt(sb, DEBUG) && !(def_mount_opts & EXT4_DEFM_DEBUG))
seq_puts(seq, ",debug");
- if (test_opt(sb, OLDALLOC))
- seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT4_FS_XATTR
if (test_opt(sb, XATTR_USER))
seq_puts(seq, ",user_xattr");
@@ -1567,10 +1582,12 @@
set_opt(sb, DEBUG);
break;
case Opt_oldalloc:
- set_opt(sb, OLDALLOC);
+ ext4_msg(sb, KERN_WARNING,
+ "Ignoring deprecated oldalloc option");
break;
case Opt_orlov:
- clear_opt(sb, OLDALLOC);
+ ext4_msg(sb, KERN_WARNING,
+ "Ignoring deprecated orlov option");
break;
#ifdef CONFIG_EXT4_FS_XATTR
case Opt_user_xattr:
@@ -1801,6 +1818,7 @@
break;
case Opt_nodelalloc:
clear_opt(sb, DELALLOC);
+ clear_opt2(sb, EXPLICIT_DELALLOC);
break;
case Opt_mblk_io_submit:
set_opt(sb, MBLK_IO_SUBMIT);
@@ -1817,6 +1835,7 @@
break;
case Opt_delalloc:
set_opt(sb, DELALLOC);
+ set_opt2(sb, EXPLICIT_DELALLOC);
break;
case Opt_block_validity:
set_opt(sb, BLOCK_VALIDITY);
@@ -1935,7 +1954,7 @@
res = MS_RDONLY;
}
if (read_only)
- return res;
+ goto done;
if (!(sbi->s_mount_state & EXT4_VALID_FS))
ext4_msg(sb, KERN_WARNING, "warning: mounting unchecked fs, "
"running e2fsck is recommended");
@@ -1966,6 +1985,7 @@
EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
ext4_commit_super(sb, 1);
+done:
if (test_opt(sb, DEBUG))
printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, "
"bpg=%lu, ipg=%lu, mo=%04x, mo2=%04x]\n",
@@ -2015,8 +2035,8 @@
flex_group = ext4_flex_group(sbi, i);
atomic_add(ext4_free_inodes_count(sb, gdp),
&sbi->s_flex_groups[flex_group].free_inodes);
- atomic_add(ext4_free_blks_count(sb, gdp),
- &sbi->s_flex_groups[flex_group].free_blocks);
+ atomic_add(ext4_free_group_clusters(sb, gdp),
+ &sbi->s_flex_groups[flex_group].free_clusters);
atomic_add(ext4_used_dirs_count(sb, gdp),
&sbi->s_flex_groups[flex_group].used_dirs);
}
@@ -2134,7 +2154,8 @@
if (NULL != first_not_zeroed)
*first_not_zeroed = grp;
- ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb));
+ ext4_free_blocks_count_set(sbi->s_es,
+ EXT4_C2B(sbi, ext4_count_free_clusters(sb)));
sbi->s_es->s_free_inodes_count =cpu_to_le32(ext4_count_free_inodes(sb));
return 1;
}
@@ -2454,7 +2475,8 @@
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%llu\n",
- (s64) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+ (s64) EXT4_C2B(sbi,
+ percpu_counter_sum(&sbi->s_dirtyclusters_counter)));
}
static ssize_t session_write_kbytes_show(struct ext4_attr *a,
@@ -2682,6 +2704,13 @@
return 0;
}
}
+ if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_BIGALLOC) &&
+ !EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+ ext4_msg(sb, KERN_ERR,
+ "Can't support bigalloc feature without "
+ "extents feature\n");
+ return 0;
+ }
return 1;
}
@@ -3087,10 +3116,10 @@
char *cp;
const char *descr;
int ret = -ENOMEM;
- int blocksize;
+ int blocksize, clustersize;
unsigned int db_count;
unsigned int i;
- int needs_recovery, has_huge_files;
+ int needs_recovery, has_huge_files, has_bigalloc;
__u64 blocks_count;
int err;
unsigned int journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
@@ -3224,6 +3253,33 @@
&journal_ioprio, NULL, 0))
goto failed_mount;
+ if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
+ printk_once(KERN_WARNING "EXT4-fs: Warning: mounting "
+ "with data=journal disables delayed "
+ "allocation and O_DIRECT support!\n");
+ if (test_opt2(sb, EXPLICIT_DELALLOC)) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "both data=journal and delalloc");
+ goto failed_mount;
+ }
+ if (test_opt(sb, DIOREAD_NOLOCK)) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "both data=journal and delalloc");
+ goto failed_mount;
+ }
+ if (test_opt(sb, DELALLOC))
+ clear_opt(sb, DELALLOC);
+ }
+
+ blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
+ if (test_opt(sb, DIOREAD_NOLOCK)) {
+ if (blocksize < PAGE_SIZE) {
+ ext4_msg(sb, KERN_ERR, "can't mount with "
+ "dioread_nolock if block size != PAGE_SIZE");
+ goto failed_mount;
+ }
+ }
+
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
(test_opt(sb, POSIX_ACL) ? MS_POSIXACL : 0);
@@ -3265,8 +3321,6 @@
if (!ext4_feature_set_ok(sb, (sb->s_flags & MS_RDONLY)))
goto failed_mount;
- blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
-
if (blocksize < EXT4_MIN_BLOCK_SIZE ||
blocksize > EXT4_MAX_BLOCK_SIZE) {
ext4_msg(sb, KERN_ERR,
@@ -3369,12 +3423,53 @@
sb->s_dirt = 1;
}
- if (sbi->s_blocks_per_group > blocksize * 8) {
- ext4_msg(sb, KERN_ERR,
- "#blocks per group too big: %lu",
- sbi->s_blocks_per_group);
- goto failed_mount;
+ /* Handle clustersize */
+ clustersize = BLOCK_SIZE << le32_to_cpu(es->s_log_cluster_size);
+ has_bigalloc = EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_BIGALLOC);
+ if (has_bigalloc) {
+ if (clustersize < blocksize) {
+ ext4_msg(sb, KERN_ERR,
+ "cluster size (%d) smaller than "
+ "block size (%d)", clustersize, blocksize);
+ goto failed_mount;
+ }
+ sbi->s_cluster_bits = le32_to_cpu(es->s_log_cluster_size) -
+ le32_to_cpu(es->s_log_block_size);
+ sbi->s_clusters_per_group =
+ le32_to_cpu(es->s_clusters_per_group);
+ if (sbi->s_clusters_per_group > blocksize * 8) {
+ ext4_msg(sb, KERN_ERR,
+ "#clusters per group too big: %lu",
+ sbi->s_clusters_per_group);
+ goto failed_mount;
+ }
+ if (sbi->s_blocks_per_group !=
+ (sbi->s_clusters_per_group * (clustersize / blocksize))) {
+ ext4_msg(sb, KERN_ERR, "blocks per group (%lu) and "
+ "clusters per group (%lu) inconsistent",
+ sbi->s_blocks_per_group,
+ sbi->s_clusters_per_group);
+ goto failed_mount;
+ }
+ } else {
+ if (clustersize != blocksize) {
+ ext4_warning(sb, "fragment/cluster size (%d) != "
+ "block size (%d)", clustersize,
+ blocksize);
+ clustersize = blocksize;
+ }
+ if (sbi->s_blocks_per_group > blocksize * 8) {
+ ext4_msg(sb, KERN_ERR,
+ "#blocks per group too big: %lu",
+ sbi->s_blocks_per_group);
+ goto failed_mount;
+ }
+ sbi->s_clusters_per_group = sbi->s_blocks_per_group;
+ sbi->s_cluster_bits = 0;
}
+ sbi->s_cluster_ratio = clustersize / blocksize;
+
if (sbi->s_inodes_per_group > blocksize * 8) {
ext4_msg(sb, KERN_ERR,
"#inodes per group too big: %lu",
@@ -3446,10 +3541,8 @@
goto failed_mount;
}
-#ifdef CONFIG_PROC_FS
if (ext4_proc_root)
sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root);
-#endif
bgl_lock_init(sbi->s_blockgroup_lock);
@@ -3483,8 +3576,8 @@
sbi->s_err_report.function = print_daily_error_info;
sbi->s_err_report.data = (unsigned long) sb;
- err = percpu_counter_init(&sbi->s_freeblocks_counter,
- ext4_count_free_blocks(sb));
+ err = percpu_counter_init(&sbi->s_freeclusters_counter,
+ ext4_count_free_clusters(sb));
if (!err) {
err = percpu_counter_init(&sbi->s_freeinodes_counter,
ext4_count_free_inodes(sb));
@@ -3494,7 +3587,7 @@
ext4_count_dirs(sb));
}
if (!err) {
- err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
+ err = percpu_counter_init(&sbi->s_dirtyclusters_counter, 0);
}
if (err) {
ext4_msg(sb, KERN_ERR, "insufficient memory");
@@ -3609,13 +3702,13 @@
* The journal may have updated the bg summary counts, so we
* need to update the global counters.
*/
- percpu_counter_set(&sbi->s_freeblocks_counter,
- ext4_count_free_blocks(sb));
+ percpu_counter_set(&sbi->s_freeclusters_counter,
+ ext4_count_free_clusters(sb));
percpu_counter_set(&sbi->s_freeinodes_counter,
ext4_count_free_inodes(sb));
percpu_counter_set(&sbi->s_dirs_counter,
ext4_count_dirs(sb));
- percpu_counter_set(&sbi->s_dirtyblocks_counter, 0);
+ percpu_counter_set(&sbi->s_dirtyclusters_counter, 0);
no_journal:
/*
@@ -3679,25 +3772,6 @@
"available");
}
- if (test_opt(sb, DELALLOC) &&
- (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) {
- ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
- "requested data journaling mode");
- clear_opt(sb, DELALLOC);
- }
- if (test_opt(sb, DIOREAD_NOLOCK)) {
- if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
- ext4_msg(sb, KERN_WARNING, "Ignoring dioread_nolock "
- "option - requested data journaling mode");
- clear_opt(sb, DIOREAD_NOLOCK);
- }
- if (sb->s_blocksize < PAGE_SIZE) {
- ext4_msg(sb, KERN_WARNING, "Ignoring dioread_nolock "
- "option - block size is too small");
- clear_opt(sb, DIOREAD_NOLOCK);
- }
- }
-
err = ext4_setup_system_zone(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize system "
@@ -3710,22 +3784,19 @@
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)",
err);
- goto failed_mount4;
+ goto failed_mount5;
}
err = ext4_register_li_request(sb, first_not_zeroed);
if (err)
- goto failed_mount4;
+ goto failed_mount6;
sbi->s_kobj.kset = ext4_kset;
init_completion(&sbi->s_kobj_unregister);
err = kobject_init_and_add(&sbi->s_kobj, &ext4_ktype, NULL,
"%s", sb->s_id);
- if (err) {
- ext4_mb_release(sb);
- ext4_ext_release(sb);
- goto failed_mount4;
- };
+ if (err)
+ goto failed_mount7;
EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS;
ext4_orphan_cleanup(sb, es);
@@ -3759,13 +3830,19 @@
ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem");
goto failed_mount;
+failed_mount7:
+ ext4_unregister_li_request(sb);
+failed_mount6:
+ ext4_ext_release(sb);
+failed_mount5:
+ ext4_mb_release(sb);
+ ext4_release_system_zone(sb);
failed_mount4:
iput(root);
sb->s_root = NULL;
ext4_msg(sb, KERN_ERR, "mount failed");
destroy_workqueue(EXT4_SB(sb)->dio_unwritten_wq);
failed_mount_wq:
- ext4_release_system_zone(sb);
if (sbi->s_journal) {
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
@@ -3774,10 +3851,10 @@
del_timer(&sbi->s_err_report);
if (sbi->s_flex_groups)
ext4_kvfree(sbi->s_flex_groups);
- percpu_counter_destroy(&sbi->s_freeblocks_counter);
+ percpu_counter_destroy(&sbi->s_freeclusters_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
- percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
+ percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
if (sbi->s_mmp_tsk)
kthread_stop(sbi->s_mmp_tsk);
failed_mount2:
@@ -4064,7 +4141,7 @@
struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
int error = 0;
- if (!sbh)
+ if (!sbh || block_device_ejected(sb))
return error;
if (buffer_write_io_error(sbh)) {
/*
@@ -4100,8 +4177,9 @@
else
es->s_kbytes_written =
cpu_to_le64(EXT4_SB(sb)->s_kbytes_written);
- ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
- &EXT4_SB(sb)->s_freeblocks_counter));
+ ext4_free_blocks_count_set(es,
+ EXT4_C2B(EXT4_SB(sb), percpu_counter_sum_positive(
+ &EXT4_SB(sb)->s_freeclusters_counter)));
es->s_free_inodes_count =
cpu_to_le32(percpu_counter_sum_positive(
&EXT4_SB(sb)->s_freeinodes_counter));
@@ -4506,16 +4584,34 @@
return err;
}
+/*
+ * Note: calculating the overhead so we can be compatible with
+ * historical BSD practice is quite difficult in the face of
+ * clusters/bigalloc. This is because multiple metadata blocks from
+ * different block group can end up in the same allocation cluster.
+ * Calculating the exact overhead in the face of clustered allocation
+ * requires either O(all block bitmaps) in memory or O(number of block
+ * groups**2) in time. We will still calculate the superblock for
+ * older file systems --- and if we come across with a bigalloc file
+ * system with zero in s_overhead_clusters the estimate will be close to
+ * correct especially for very large cluster sizes --- but for newer
+ * file systems, it's better to calculate this figure once at mkfs
+ * time, and store it in the superblock. If the superblock value is
+ * present (even for non-bigalloc file systems), we will use it.
+ */
static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
+ struct ext4_group_desc *gdp;
u64 fsid;
s64 bfree;
if (test_opt(sb, MINIX_DF)) {
sbi->s_overhead_last = 0;
+ } else if (es->s_overhead_clusters) {
+ sbi->s_overhead_last = le32_to_cpu(es->s_overhead_clusters);
} else if (sbi->s_blocks_last != ext4_blocks_count(es)) {
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
ext4_fsblk_t overhead = 0;
@@ -4530,24 +4626,16 @@
* All of the blocks before first_data_block are
* overhead
*/
- overhead = le32_to_cpu(es->s_first_data_block);
+ overhead = EXT4_B2C(sbi, le32_to_cpu(es->s_first_data_block));
/*
- * Add the overhead attributed to the superblock and
- * block group descriptors. If the sparse superblocks
- * feature is turned on, then not all groups have this.
+ * Add the overhead found in each block group
*/
for (i = 0; i < ngroups; i++) {
- overhead += ext4_bg_has_super(sb, i) +
- ext4_bg_num_gdb(sb, i);
+ gdp = ext4_get_group_desc(sb, i, NULL);
+ overhead += ext4_num_overhead_clusters(sb, i, gdp);
cond_resched();
}
-
- /*
- * Every block group has an inode bitmap, a block
- * bitmap, and an inode table.
- */
- overhead += ngroups * (2 + sbi->s_itb_per_group);
sbi->s_overhead_last = overhead;
smp_wmb();
sbi->s_blocks_last = ext4_blocks_count(es);
@@ -4555,11 +4643,12 @@
buf->f_type = EXT4_SUPER_MAGIC;
buf->f_bsize = sb->s_blocksize;
- buf->f_blocks = ext4_blocks_count(es) - sbi->s_overhead_last;
- bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter) -
- percpu_counter_sum_positive(&sbi->s_dirtyblocks_counter);
+ buf->f_blocks = (ext4_blocks_count(es) -
+ EXT4_C2B(sbi, sbi->s_overhead_last));
+ bfree = percpu_counter_sum_positive(&sbi->s_freeclusters_counter) -
+ percpu_counter_sum_positive(&sbi->s_dirtyclusters_counter);
/* prevent underflow in case that few free space is available */
- buf->f_bfree = max_t(s64, bfree, 0);
+ buf->f_bfree = EXT4_C2B(sbi, max_t(s64, bfree, 0));
buf->f_bavail = buf->f_bfree - ext4_r_blocks_count(es);
if (buf->f_bfree < ext4_r_blocks_count(es))
buf->f_bavail = 0;
@@ -4980,13 +5069,11 @@
return err;
err = ext4_init_system_zone();
if (err)
- goto out7;
+ goto out6;
ext4_kset = kset_create_and_add("ext4", NULL, fs_kobj);
if (!ext4_kset)
- goto out6;
- ext4_proc_root = proc_mkdir("fs/ext4", NULL);
- if (!ext4_proc_root)
goto out5;
+ ext4_proc_root = proc_mkdir("fs/ext4", NULL);
err = ext4_init_feat_adverts();
if (err)
@@ -5022,12 +5109,12 @@
out3:
ext4_exit_feat_adverts();
out4:
- remove_proc_entry("fs/ext4", NULL);
-out5:
+ if (ext4_proc_root)
+ remove_proc_entry("fs/ext4", NULL);
kset_unregister(ext4_kset);
-out6:
+out5:
ext4_exit_system_zone();
-out7:
+out6:
ext4_exit_pageio();
return err;
}
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index c757adc..93a00d8 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -820,8 +820,14 @@
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
goal = goal & EXT4_MAX_BLOCK_FILE_PHYS;
+ /*
+ * take i_data_sem because we will test
+ * i_delalloc_reserved_flag in ext4_mb_new_blocks
+ */
+ down_read((&EXT4_I(inode)->i_data_sem));
block = ext4_new_meta_blocks(handle, inode, goal, 0,
NULL, &error);
+ up_read((&EXT4_I(inode)->i_data_sem));
if (error)
goto cleanup;
@@ -985,11 +991,7 @@
no_expand = ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND);
ext4_set_inode_state(inode, EXT4_STATE_NO_EXPAND);
- error = ext4_get_inode_loc(inode, &is.iloc);
- if (error)
- goto cleanup;
-
- error = ext4_journal_get_write_access(handle, is.iloc.bh);
+ error = ext4_reserve_inode_write(handle, inode, &is.iloc);
if (error)
goto cleanup;
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 1726d73..808cac7 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -379,7 +379,7 @@
return error;
MSDOS_I(inode)->mmu_private = inode->i_size;
- inode->i_nlink = fat_subdirs(inode);
+ set_nlink(inode, fat_subdirs(inode));
} else { /* not a directory */
inode->i_generation |= 1;
inode->i_mode = fat_make_mode(sbi, de->attr,
@@ -1233,7 +1233,7 @@
fat_save_attrs(inode, ATTR_DIR);
inode->i_mtime.tv_sec = inode->i_atime.tv_sec = inode->i_ctime.tv_sec = 0;
inode->i_mtime.tv_nsec = inode->i_atime.tv_nsec = inode->i_ctime.tv_nsec = 0;
- inode->i_nlink = fat_subdirs(inode)+2;
+ set_nlink(inode, fat_subdirs(inode)+2);
return 0;
}
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 66e83b8..216b419 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -387,7 +387,7 @@
/* the directory was completed, just return a error */
goto out;
}
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index bb3f29c..a87a656 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -900,7 +900,7 @@
goto out;
}
inode->i_version++;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c
index 1a43114..7b2af5a 100644
--- a/fs/freevxfs/vxfs_inode.c
+++ b/fs/freevxfs/vxfs_inode.c
@@ -227,7 +227,7 @@
ip->i_uid = (uid_t)vip->vii_uid;
ip->i_gid = (gid_t)vip->vii_gid;
- ip->i_nlink = vip->vii_nlink;
+ set_nlink(ip, vip->vii_nlink);
ip->i_size = vip->vii_size;
ip->i_atime.tv_sec = vip->vii_atime;
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index 85542a7..42593c5 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -231,7 +231,7 @@
if (iop)
inode->i_op = iop;
inode->i_fop = fop;
- inode->i_nlink = nlink;
+ set_nlink(inode, nlink);
inode->i_private = fc;
d_add(dentry, inode);
return dentry;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index add96f6..3e6d727 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -151,7 +151,7 @@
inode->i_ino = attr->ino;
inode->i_mode = (inode->i_mode & S_IFMT) | (attr->mode & 07777);
- inode->i_nlink = attr->nlink;
+ set_nlink(inode, attr->nlink);
inode->i_uid = attr->uid;
inode->i_gid = attr->gid;
inode->i_blocks = attr->blocks;
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 78418b4..1656df7 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -299,7 +299,7 @@
if (nlink == 0)
clear_nlink(inode);
else
- inode->i_nlink = nlink;
+ set_nlink(inode, nlink);
}
}
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 3ebc437..1cbdeea 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -46,11 +46,26 @@
case HFS_EXT_CNID:
hfs_inode_read_fork(tree->inode, mdb->drXTExtRec, mdb->drXTFlSize,
mdb->drXTFlSize, be32_to_cpu(mdb->drXTClpSiz));
+ if (HFS_I(tree->inode)->alloc_blocks >
+ HFS_I(tree->inode)->first_blocks) {
+ printk(KERN_ERR "hfs: invalid btree extent records\n");
+ unlock_new_inode(tree->inode);
+ goto free_inode;
+ }
+
tree->inode->i_mapping->a_ops = &hfs_btree_aops;
break;
case HFS_CAT_CNID:
hfs_inode_read_fork(tree->inode, mdb->drCTExtRec, mdb->drCTFlSize,
mdb->drCTFlSize, be32_to_cpu(mdb->drCTClpSiz));
+
+ if (!HFS_I(tree->inode)->first_blocks) {
+ printk(KERN_ERR "hfs: invalid btree extent records "
+ "(0 size).\n");
+ unlock_new_inode(tree->inode);
+ goto free_inode;
+ }
+
tree->inode->i_mapping->a_ops = &hfs_btree_aops;
break;
default:
@@ -59,11 +74,6 @@
}
unlock_new_inode(tree->inode);
- if (!HFS_I(tree->inode)->first_blocks) {
- printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n");
- goto free_inode;
- }
-
mapping = tree->inode->i_mapping;
page = read_mapping_page(mapping, 0, NULL);
if (IS_ERR(page))
diff --git a/fs/hfs/dir.c b/fs/hfs/dir.c
index b4d70b1..bce4eef 100644
--- a/fs/hfs/dir.c
+++ b/fs/hfs/dir.c
@@ -198,7 +198,7 @@
res = hfs_cat_create(inode->i_ino, dir, &dentry->d_name, inode);
if (res) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfs_delete_inode(inode);
iput(inode);
return res;
@@ -227,7 +227,7 @@
res = hfs_cat_create(inode->i_ino, dir, &dentry->d_name, inode);
if (res) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfs_delete_inode(inode);
iput(inode);
return res;
diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index 96a1b62..a1a9fdc 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -183,7 +183,7 @@
inode->i_mode = mode;
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
HFS_I(inode)->flags = 0;
HFS_I(inode)->rsrc_inode = NULL;
@@ -313,7 +313,7 @@
/* Initialize the inode */
inode->i_uid = hsb->s_uid;
inode->i_gid = hsb->s_gid;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
if (idata->key)
HFS_I(inode)->cat_key = *idata->key;
diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c
index 25b2443..4536cd3 100644
--- a/fs/hfsplus/dir.c
+++ b/fs/hfsplus/dir.c
@@ -415,7 +415,7 @@
goto out;
out_err:
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfsplus_delete_inode(inode);
iput(inode);
out:
@@ -440,7 +440,7 @@
res = hfsplus_create_cat(inode->i_ino, dir, &dentry->d_name, inode);
if (res) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
hfsplus_delete_inode(inode);
iput(inode);
goto out;
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 4cc1e3a..40e1413 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -391,7 +391,7 @@
inode->i_mode = mode;
inode->i_uid = current_fsuid();
inode->i_gid = current_fsgid();
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME_SEC;
hip = HFSPLUS_I(inode);
@@ -512,7 +512,7 @@
hfs_bnode_read(fd->bnode, &entry, fd->entryoffset,
sizeof(struct hfsplus_cat_folder));
hfsplus_get_perms(inode, &folder->permissions, 1);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_size = 2 + be32_to_cpu(folder->valence);
inode->i_atime = hfsp_mt2ut(folder->access_date);
inode->i_mtime = hfsp_mt2ut(folder->content_mod_date);
@@ -532,11 +532,11 @@
hfsplus_inode_read_fork(inode, HFSPLUS_IS_RSRC(inode) ?
&file->rsrc_fork : &file->data_fork);
hfsplus_get_perms(inode, &file->permissions, 0);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
if (S_ISREG(inode->i_mode)) {
if (file->permissions.dev)
- inode->i_nlink =
- be32_to_cpu(file->permissions.dev);
+ set_nlink(inode,
+ be32_to_cpu(file->permissions.dev));
inode->i_op = &hfsplus_file_inode_operations;
inode->i_fop = &hfsplus_file_operations;
inode->i_mapping->a_ops = &hfsplus_aops;
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 0d22afd..2f72da5 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -541,7 +541,7 @@
ino->i_ino = st.ino;
ino->i_mode = st.mode;
- ino->i_nlink = st.nlink;
+ set_nlink(ino, st.nlink);
ino->i_uid = st.uid;
ino->i_gid = st.gid;
ino->i_atime = st.atime;
diff --git a/fs/hostfs/hostfs_user.c b/fs/hostfs/hostfs_user.c
index d51a983..dd7bc38 100644
--- a/fs/hostfs/hostfs_user.c
+++ b/fs/hostfs/hostfs_user.c
@@ -16,7 +16,6 @@
#include <sys/vfs.h>
#include "hostfs.h"
#include "os.h"
-#include "user.h"
#include <utime.h>
static void stat64_to_hostfs(const struct stat64 *buf, struct hostfs_stat *p)
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index 96a8ed9..2fa0089 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -247,7 +247,7 @@
result->i_mode &= ~0111;
result->i_op = &hpfs_file_iops;
result->i_fop = &hpfs_file_ops;
- result->i_nlink = 1;
+ set_nlink(result, 1);
}
unlock_new_inode(result);
}
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 338cd83..3b2cec2 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -53,7 +53,7 @@
i->i_mode &= ~0111;
i->i_op = &hpfs_file_iops;
i->i_fop = &hpfs_file_ops;
- i->i_nlink = 0;*/
+ clear_nlink(i);*/
make_bad_inode(i);
return;
}
@@ -77,7 +77,7 @@
i->i_mode = S_IFLNK | 0777;
i->i_op = &page_symlink_inode_operations;
i->i_data.a_ops = &hpfs_symlink_aops;
- i->i_nlink = 1;
+ set_nlink(i, 1);
i->i_size = ea_size;
i->i_blocks = 1;
brelse(bh);
@@ -101,7 +101,7 @@
}
if (S_ISBLK(mode) || S_ISCHR(mode) || S_ISFIFO(mode) || S_ISSOCK(mode)) {
brelse(bh);
- i->i_nlink = 1;
+ set_nlink(i, 1);
i->i_size = 0;
i->i_blocks = 1;
init_special_inode(i, mode,
@@ -125,13 +125,13 @@
hpfs_count_dnodes(i->i_sb, hpfs_inode->i_dno, &n_dnodes, &n_subdirs, NULL);
i->i_blocks = 4 * n_dnodes;
i->i_size = 2048 * n_dnodes;
- i->i_nlink = 2 + n_subdirs;
+ set_nlink(i, 2 + n_subdirs);
} else {
i->i_mode |= S_IFREG;
if (!hpfs_inode->i_ea_mode) i->i_mode &= ~0111;
i->i_op = &hpfs_file_iops;
i->i_fop = &hpfs_file_ops;
- i->i_nlink = 1;
+ set_nlink(i, 1);
i->i_size = le32_to_cpu(fnode->file_size);
i->i_blocks = ((i->i_size + 511) >> 9) + 1;
i->i_data.a_ops = &hpfs_aops;
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index 2df69e2..ea91fcb 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -56,7 +56,7 @@
result->i_fop = &hpfs_dir_ops;
result->i_blocks = 4;
result->i_size = 2048;
- result->i_nlink = 2;
+ set_nlink(result, 2);
if (dee.read_only)
result->i_mode &= ~0222;
@@ -150,7 +150,7 @@
result->i_mode &= ~0111;
result->i_op = &hpfs_file_iops;
result->i_fop = &hpfs_file_ops;
- result->i_nlink = 1;
+ set_nlink(result, 1);
hpfs_i(result)->i_parent_dir = dir->i_ino;
result->i_ctime.tv_sec = result->i_mtime.tv_sec = result->i_atime.tv_sec = local_to_gmt(dir->i_sb, le32_to_cpu(dee.creation_date));
result->i_ctime.tv_nsec = 0;
@@ -242,7 +242,7 @@
hpfs_i(result)->i_ea_size = 0;
result->i_uid = current_fsuid();
result->i_gid = current_fsgid();
- result->i_nlink = 1;
+ set_nlink(result, 1);
result->i_size = 0;
result->i_blocks = 1;
init_special_inode(result, mode, rdev);
@@ -318,7 +318,7 @@
result->i_uid = current_fsuid();
result->i_gid = current_fsgid();
result->i_blocks = 1;
- result->i_nlink = 1;
+ set_nlink(result, 1);
result->i_size = strlen(symlink);
result->i_op = &page_symlink_inode_operations;
result->i_data.a_ops = &hpfs_symlink_aops;
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index 970ea98..f590b11 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -702,7 +702,7 @@
inode->i_ctime = proc_ino->i_ctime;
inode->i_ino = proc_ino->i_ino;
inode->i_mode = proc_ino->i_mode;
- inode->i_nlink = proc_ino->i_nlink;
+ set_nlink(inode, proc_ino->i_nlink);
inode->i_size = proc_ino->i_size;
inode->i_blocks = proc_ino->i_blocks;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index ec88953..0be5a78 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -970,7 +970,7 @@
d_instantiate(path.dentry, inode);
inode->i_size = size;
- inode->i_nlink = 0;
+ clear_nlink(inode);
error = -ENFILE;
file = alloc_file(&path, FMODE_WRITE | FMODE_READ,
diff --git a/fs/inode.c b/fs/inode.c
index ecbb68d..ee4e66b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -142,7 +142,7 @@
atomic_set(&inode->i_count, 1);
inode->i_op = &empty_iops;
inode->i_fop = &empty_fops;
- inode->i_nlink = 1;
+ inode->__i_nlink = 1;
inode->i_opflags = 0;
inode->i_uid = 0;
inode->i_gid = 0;
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index a5d0367..f950059 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -20,6 +20,7 @@
#include <linux/statfs.h>
#include <linux/cdrom.h>
#include <linux/parser.h>
+#include <linux/mpage.h>
#include "isofs.h"
#include "zisofs.h"
@@ -1148,7 +1149,13 @@
static int isofs_readpage(struct file *file, struct page *page)
{
- return block_read_full_page(page,isofs_get_block);
+ return mpage_readpage(page, isofs_get_block);
+}
+
+static int isofs_readpages(struct file *file, struct address_space *mapping,
+ struct list_head *pages, unsigned nr_pages)
+{
+ return mpage_readpages(mapping, pages, nr_pages, isofs_get_block);
}
static sector_t _isofs_bmap(struct address_space *mapping, sector_t block)
@@ -1158,6 +1165,7 @@
static const struct address_space_operations isofs_aops = {
.readpage = isofs_readpage,
+ .readpages = isofs_readpages,
.bmap = _isofs_bmap
};
@@ -1319,7 +1327,7 @@
inode->i_mode = S_IFDIR | sbi->s_dmode;
else
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
- inode->i_nlink = 1; /*
+ set_nlink(inode, 1); /*
* Set to 1. We know there are 2, but
* the find utility tries to optimize
* if it is 2, and it screws up. It is
@@ -1337,7 +1345,7 @@
*/
inode->i_mode = S_IFREG | S_IRUGO | S_IXUGO;
}
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
inode->i_uid = sbi->s_uid;
inode->i_gid = sbi->s_gid;
diff --git a/fs/isofs/rock.c b/fs/isofs/rock.c
index 1fbc7de..70e79d0 100644
--- a/fs/isofs/rock.c
+++ b/fs/isofs/rock.c
@@ -363,7 +363,7 @@
break;
case SIG('P', 'X'):
inode->i_mode = isonum_733(rr->u.PX.mode);
- inode->i_nlink = isonum_733(rr->u.PX.n_links);
+ set_nlink(inode, isonum_733(rr->u.PX.n_links));
inode->i_uid = isonum_733(rr->u.PX.uid);
inode->i_gid = isonum_733(rr->u.PX.gid);
break;
@@ -496,7 +496,7 @@
goto out;
}
inode->i_mode = reloc->i_mode;
- inode->i_nlink = reloc->i_nlink;
+ set_nlink(inode, reloc->i_nlink);
inode->i_uid = reloc->i_uid;
inode->i_gid = reloc->i_gid;
inode->i_rdev = reloc->i_rdev;
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 9fe061f..fea8dd6 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -1135,6 +1135,14 @@
goto out;
}
+ if (be32_to_cpu(sb->s_first) == 0 ||
+ be32_to_cpu(sb->s_first) >= journal->j_maxlen) {
+ printk(KERN_WARNING
+ "JBD: Invalid start block of journal: %u\n",
+ be32_to_cpu(sb->s_first));
+ goto out;
+ }
+
return 0;
out:
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index eef6979..68d704d 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -352,7 +352,7 @@
J_ASSERT(commit_transaction->t_state == T_RUNNING);
trace_jbd2_start_commit(journal, commit_transaction);
- jbd_debug(1, "JBD: starting commit of transaction %d\n",
+ jbd_debug(1, "JBD2: starting commit of transaction %d\n",
commit_transaction->t_tid);
write_lock(&journal->j_state_lock);
@@ -427,7 +427,7 @@
__jbd2_journal_clean_checkpoint_list(journal);
spin_unlock(&journal->j_list_lock);
- jbd_debug (3, "JBD: commit phase 1\n");
+ jbd_debug(3, "JBD2: commit phase 1\n");
/*
* Switch to a new revoke table.
@@ -447,7 +447,7 @@
wake_up(&journal->j_wait_transaction_locked);
write_unlock(&journal->j_state_lock);
- jbd_debug (3, "JBD: commit phase 2\n");
+ jbd_debug(3, "JBD2: commit phase 2\n");
/*
* Now start flushing things to disk, in the order they appear
@@ -462,7 +462,7 @@
WRITE_SYNC);
blk_finish_plug(&plug);
- jbd_debug(3, "JBD: commit phase 2\n");
+ jbd_debug(3, "JBD2: commit phase 2\n");
/*
* Way to go: we have now written out all of the data for a
@@ -522,7 +522,7 @@
J_ASSERT (bufs == 0);
- jbd_debug(4, "JBD: get descriptor\n");
+ jbd_debug(4, "JBD2: get descriptor\n");
descriptor = jbd2_journal_get_descriptor_buffer(journal);
if (!descriptor) {
@@ -531,7 +531,7 @@
}
bh = jh2bh(descriptor);
- jbd_debug(4, "JBD: got buffer %llu (%p)\n",
+ jbd_debug(4, "JBD2: got buffer %llu (%p)\n",
(unsigned long long)bh->b_blocknr, bh->b_data);
header = (journal_header_t *)&bh->b_data[0];
header->h_magic = cpu_to_be32(JBD2_MAGIC_NUMBER);
@@ -625,7 +625,7 @@
commit_transaction->t_buffers == NULL ||
space_left < tag_bytes + 16) {
- jbd_debug(4, "JBD: Submit %d IOs\n", bufs);
+ jbd_debug(4, "JBD2: Submit %d IOs\n", bufs);
/* Write an end-of-descriptor marker before
submitting the IOs. "tag" still points to
@@ -707,7 +707,7 @@
so we incur less scheduling load.
*/
- jbd_debug(3, "JBD: commit phase 3\n");
+ jbd_debug(3, "JBD2: commit phase 3\n");
/*
* akpm: these are BJ_IO, and j_list_lock is not needed.
@@ -771,7 +771,7 @@
J_ASSERT (commit_transaction->t_shadow_list == NULL);
- jbd_debug(3, "JBD: commit phase 4\n");
+ jbd_debug(3, "JBD2: commit phase 4\n");
/* Here we wait for the revoke record and descriptor record buffers */
wait_for_ctlbuf:
@@ -801,7 +801,7 @@
if (err)
jbd2_journal_abort(journal, err);
- jbd_debug(3, "JBD: commit phase 5\n");
+ jbd_debug(3, "JBD2: commit phase 5\n");
write_lock(&journal->j_state_lock);
J_ASSERT(commit_transaction->t_state == T_COMMIT_DFLUSH);
commit_transaction->t_state = T_COMMIT_JFLUSH;
@@ -830,7 +830,7 @@
transaction can be removed from any checkpoint list it was on
before. */
- jbd_debug(3, "JBD: commit phase 6\n");
+ jbd_debug(3, "JBD2: commit phase 6\n");
J_ASSERT(list_empty(&commit_transaction->t_inode_list));
J_ASSERT(commit_transaction->t_buffers == NULL);
@@ -964,7 +964,7 @@
/* Done with this transaction! */
- jbd_debug(3, "JBD: commit phase 7\n");
+ jbd_debug(3, "JBD2: commit phase 7\n");
J_ASSERT(commit_transaction->t_state == T_COMMIT_JFLUSH);
@@ -1039,7 +1039,7 @@
journal->j_commit_callback(journal, commit_transaction);
trace_jbd2_end_commit(journal, commit_transaction);
- jbd_debug(1, "JBD: commit %d complete, head %d\n",
+ jbd_debug(1, "JBD2: commit %d complete, head %d\n",
journal->j_commit_sequence, journal->j_tail_sequence);
if (to_free)
kfree(commit_transaction);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index f24df13..0fa0123 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -491,7 +491,7 @@
*/
journal->j_commit_request = target;
- jbd_debug(1, "JBD: requesting commit %d/%d\n",
+ jbd_debug(1, "JBD2: requesting commit %d/%d\n",
journal->j_commit_request,
journal->j_commit_sequence);
wake_up(&journal->j_wait_commit);
@@ -500,7 +500,7 @@
/* This should never happen, but if it does, preserve
the evidence before kjournald goes into a loop and
increments j_commit_sequence beyond all recognition. */
- WARN_ONCE(1, "jbd: bad log_start_commit: %u %u %u %u\n",
+ WARN_ONCE(1, "JBD2: bad log_start_commit: %u %u %u %u\n",
journal->j_commit_request,
journal->j_commit_sequence,
target, journal->j_running_transaction ?
@@ -645,7 +645,7 @@
}
#endif
while (tid_gt(tid, journal->j_commit_sequence)) {
- jbd_debug(1, "JBD: want %d, j_commit_sequence=%d\n",
+ jbd_debug(1, "JBD2: want %d, j_commit_sequence=%d\n",
tid, journal->j_commit_sequence);
wake_up(&journal->j_wait_commit);
read_unlock(&journal->j_state_lock);
@@ -1093,7 +1093,7 @@
first = be32_to_cpu(sb->s_first);
last = be32_to_cpu(sb->s_maxlen);
if (first + JBD2_MIN_JOURNAL_BLOCKS > last + 1) {
- printk(KERN_ERR "JBD: Journal too short (blocks %llu-%llu).\n",
+ printk(KERN_ERR "JBD2: Journal too short (blocks %llu-%llu).\n",
first, last);
journal_fail_superblock(journal);
return -EINVAL;
@@ -1139,7 +1139,7 @@
*/
if (sb->s_start == 0 && journal->j_tail_sequence ==
journal->j_transaction_sequence) {
- jbd_debug(1,"JBD: Skipping superblock update on recovered sb "
+ jbd_debug(1, "JBD2: Skipping superblock update on recovered sb "
"(start %ld, seq %d, errno %d)\n",
journal->j_tail, journal->j_tail_sequence,
journal->j_errno);
@@ -1163,7 +1163,7 @@
}
read_lock(&journal->j_state_lock);
- jbd_debug(1,"JBD: updating superblock (start %ld, seq %d, errno %d)\n",
+ jbd_debug(1, "JBD2: updating superblock (start %ld, seq %d, errno %d)\n",
journal->j_tail, journal->j_tail_sequence, journal->j_errno);
sb->s_sequence = cpu_to_be32(journal->j_tail_sequence);
@@ -1216,8 +1216,8 @@
ll_rw_block(READ, 1, &bh);
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
- printk (KERN_ERR
- "JBD: IO error reading journal superblock\n");
+ printk(KERN_ERR
+ "JBD2: IO error reading journal superblock\n");
goto out;
}
}
@@ -1228,7 +1228,7 @@
if (sb->s_header.h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER) ||
sb->s_blocksize != cpu_to_be32(journal->j_blocksize)) {
- printk(KERN_WARNING "JBD: no valid journal superblock found\n");
+ printk(KERN_WARNING "JBD2: no valid journal superblock found\n");
goto out;
}
@@ -1240,14 +1240,22 @@
journal->j_format_version = 2;
break;
default:
- printk(KERN_WARNING "JBD: unrecognised superblock format ID\n");
+ printk(KERN_WARNING "JBD2: unrecognised superblock format ID\n");
goto out;
}
if (be32_to_cpu(sb->s_maxlen) < journal->j_maxlen)
journal->j_maxlen = be32_to_cpu(sb->s_maxlen);
else if (be32_to_cpu(sb->s_maxlen) > journal->j_maxlen) {
- printk (KERN_WARNING "JBD: journal file too short\n");
+ printk(KERN_WARNING "JBD2: journal file too short\n");
+ goto out;
+ }
+
+ if (be32_to_cpu(sb->s_first) == 0 ||
+ be32_to_cpu(sb->s_first) >= journal->j_maxlen) {
+ printk(KERN_WARNING
+ "JBD2: Invalid start block of journal: %u\n",
+ be32_to_cpu(sb->s_first));
goto out;
}
@@ -1310,8 +1318,8 @@
~cpu_to_be32(JBD2_KNOWN_ROCOMPAT_FEATURES)) ||
(sb->s_feature_incompat &
~cpu_to_be32(JBD2_KNOWN_INCOMPAT_FEATURES))) {
- printk (KERN_WARNING
- "JBD: Unrecognised features on journal\n");
+ printk(KERN_WARNING
+ "JBD2: Unrecognised features on journal\n");
return -EINVAL;
}
}
@@ -1346,7 +1354,7 @@
return 0;
recovery_error:
- printk (KERN_WARNING "JBD: recovery failed\n");
+ printk(KERN_WARNING "JBD2: recovery failed\n");
return -EIO;
}
@@ -1577,7 +1585,7 @@
struct buffer_head *bh;
printk(KERN_WARNING
- "JBD: Converting superblock from version 1 to 2.\n");
+ "JBD2: Converting superblock from version 1 to 2.\n");
/* Pre-initialise new fields to zero */
offset = ((char *) &(sb->s_feature_compat)) - ((char *) sb);
@@ -1694,7 +1702,7 @@
if (!journal->j_tail)
goto no_recovery;
- printk (KERN_WARNING "JBD: %s recovery information on journal\n",
+ printk(KERN_WARNING "JBD2: %s recovery information on journal\n",
write ? "Clearing" : "Ignoring");
err = jbd2_journal_skip_recovery(journal);
@@ -2020,7 +2028,7 @@
retval = 0;
if (!jbd2_journal_head_cache) {
retval = -ENOMEM;
- printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
+ printk(KERN_EMERG "JBD2: no memory for journal_head cache\n");
}
return retval;
}
@@ -2383,7 +2391,7 @@
#ifdef CONFIG_JBD2_DEBUG
int n = atomic_read(&nr_journal_heads);
if (n)
- printk(KERN_EMERG "JBD: leaked %d journal_heads!\n", n);
+ printk(KERN_EMERG "JBD2: leaked %d journal_heads!\n", n);
#endif
jbd2_remove_debugfs_entry();
jbd2_remove_jbd_stats_proc_entry();
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 1cad869..da6d7ba 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -89,7 +89,7 @@
err = jbd2_journal_bmap(journal, next, &blocknr);
if (err) {
- printk (KERN_ERR "JBD: bad block at offset %u\n",
+ printk(KERN_ERR "JBD2: bad block at offset %u\n",
next);
goto failed;
}
@@ -138,14 +138,14 @@
*bhp = NULL;
if (offset >= journal->j_maxlen) {
- printk(KERN_ERR "JBD: corrupted journal superblock\n");
+ printk(KERN_ERR "JBD2: corrupted journal superblock\n");
return -EIO;
}
err = jbd2_journal_bmap(journal, offset, &blocknr);
if (err) {
- printk (KERN_ERR "JBD: bad block at offset %u\n",
+ printk(KERN_ERR "JBD2: bad block at offset %u\n",
offset);
return err;
}
@@ -163,7 +163,7 @@
}
if (!buffer_uptodate(bh)) {
- printk (KERN_ERR "JBD: Failed to read block at offset %u\n",
+ printk(KERN_ERR "JBD2: Failed to read block at offset %u\n",
offset);
brelse(bh);
return -EIO;
@@ -251,10 +251,10 @@
if (!err)
err = do_one_pass(journal, &info, PASS_REPLAY);
- jbd_debug(1, "JBD: recovery, exit status %d, "
+ jbd_debug(1, "JBD2: recovery, exit status %d, "
"recovered transactions %u to %u\n",
err, info.start_transaction, info.end_transaction);
- jbd_debug(1, "JBD: Replayed %d and revoked %d/%d blocks\n",
+ jbd_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
/* Restart the log at the next transaction ID, thus invalidating
@@ -293,14 +293,14 @@
err = do_one_pass(journal, &info, PASS_SCAN);
if (err) {
- printk(KERN_ERR "JBD: error %d scanning journal\n", err);
+ printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
++journal->j_transaction_sequence;
} else {
#ifdef CONFIG_JBD2_DEBUG
int dropped = info.end_transaction -
be32_to_cpu(journal->j_superblock->s_sequence);
jbd_debug(1,
- "JBD: ignoring %d transaction%s from the journal.\n",
+ "JBD2: ignoring %d transaction%s from the journal.\n",
dropped, (dropped == 1) ? "" : "s");
#endif
journal->j_transaction_sequence = ++info.end_transaction;
@@ -338,7 +338,7 @@
wrap(journal, *next_log_block);
err = jread(&obh, journal, io_block);
if (err) {
- printk(KERN_ERR "JBD: IO error %d recovering block "
+ printk(KERN_ERR "JBD2: IO error %d recovering block "
"%lu in log\n", err, io_block);
return 1;
} else {
@@ -411,7 +411,7 @@
* either the next descriptor block or the final commit
* record. */
- jbd_debug(3, "JBD: checking block %ld\n", next_log_block);
+ jbd_debug(3, "JBD2: checking block %ld\n", next_log_block);
err = jread(&bh, journal, next_log_block);
if (err)
goto failed;
@@ -491,8 +491,8 @@
/* Recover what we can, but
* report failure at the end. */
success = err;
- printk (KERN_ERR
- "JBD: IO error %d recovering "
+ printk(KERN_ERR
+ "JBD2: IO error %d recovering "
"block %ld in log\n",
err, io_block);
} else {
@@ -520,7 +520,7 @@
journal->j_blocksize);
if (nbh == NULL) {
printk(KERN_ERR
- "JBD: Out of memory "
+ "JBD2: Out of memory "
"during recovery.\n");
err = -ENOMEM;
brelse(bh);
@@ -689,7 +689,7 @@
/* It's really bad news if different passes end up at
* different places (but possible due to IO errors). */
if (info->end_transaction != next_commit_ID) {
- printk (KERN_ERR "JBD: recovery pass %d ended at "
+ printk(KERN_ERR "JBD2: recovery pass %d ended at "
"transaction %u, expected %u\n",
pass, next_commit_ID, info->end_transaction);
if (!success)
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 2d71094..a0e41a4 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -27,6 +27,7 @@
#include <linux/highmem.h>
#include <linux/hrtimer.h>
#include <linux/backing-dev.h>
+#include <linux/bug.h>
#include <linux/module.h>
static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh);
@@ -115,7 +116,7 @@
*/
static int start_this_handle(journal_t *journal, handle_t *handle,
- int gfp_mask)
+ gfp_t gfp_mask)
{
transaction_t *transaction, *new_transaction = NULL;
tid_t tid;
@@ -124,7 +125,7 @@
unsigned long ts = jiffies;
if (nblocks > journal->j_max_transaction_buffers) {
- printk(KERN_ERR "JBD: %s wants too many credits (%d > %d)\n",
+ printk(KERN_ERR "JBD2: %s wants too many credits (%d > %d)\n",
current->comm, nblocks,
journal->j_max_transaction_buffers);
return -ENOSPC;
@@ -320,7 +321,7 @@
* Return a pointer to a newly allocated handle, or an ERR_PTR() value
* on failure.
*/
-handle_t *jbd2__journal_start(journal_t *journal, int nblocks, int gfp_mask)
+handle_t *jbd2__journal_start(journal_t *journal, int nblocks, gfp_t gfp_mask)
{
handle_t *handle = journal_current_handle();
int err;
@@ -443,7 +444,7 @@
* transaction capabable of guaranteeing the requested number of
* credits.
*/
-int jbd2__journal_restart(handle_t *handle, int nblocks, int gfp_mask)
+int jbd2__journal_restart(handle_t *handle, int nblocks, gfp_t gfp_mask)
{
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
@@ -563,7 +564,7 @@
char b[BDEVNAME_SIZE];
printk(KERN_WARNING
- "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+ "JBD2: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
"There's a risk of filesystem corruption in case of system "
"crash.\n",
bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
@@ -1049,6 +1050,10 @@
* mark dirty metadata which needs to be journaled as part of the current
* transaction.
*
+ * The buffer must have previously had jbd2_journal_get_write_access()
+ * called so that it has a valid journal_head attached to the buffer
+ * head.
+ *
* The buffer is placed on the transaction's metadata list and is marked
* as belonging to the transaction.
*
@@ -1065,11 +1070,16 @@
transaction_t *transaction = handle->h_transaction;
journal_t *journal = transaction->t_journal;
struct journal_head *jh = bh2jh(bh);
+ int ret = 0;
jbd_debug(5, "journal_head %p\n", jh);
JBUFFER_TRACE(jh, "entry");
if (is_handle_aborted(handle))
goto out;
+ if (!buffer_jbd(bh)) {
+ ret = -EUCLEAN;
+ goto out;
+ }
jbd_lock_bh_state(bh);
@@ -1093,8 +1103,20 @@
*/
if (jh->b_transaction == transaction && jh->b_jlist == BJ_Metadata) {
JBUFFER_TRACE(jh, "fastpath");
- J_ASSERT_JH(jh, jh->b_transaction ==
- journal->j_running_transaction);
+ if (unlikely(jh->b_transaction !=
+ journal->j_running_transaction)) {
+ printk(KERN_EMERG "JBD: %s: "
+ "jh->b_transaction (%llu, %p, %u) != "
+ "journal->j_running_transaction (%p, %u)",
+ journal->j_devname,
+ (unsigned long long) bh->b_blocknr,
+ jh->b_transaction,
+ jh->b_transaction ? jh->b_transaction->t_tid : 0,
+ journal->j_running_transaction,
+ journal->j_running_transaction ?
+ journal->j_running_transaction->t_tid : 0);
+ ret = -EINVAL;
+ }
goto out_unlock_bh;
}
@@ -1108,9 +1130,32 @@
*/
if (jh->b_transaction != transaction) {
JBUFFER_TRACE(jh, "already on other transaction");
- J_ASSERT_JH(jh, jh->b_transaction ==
- journal->j_committing_transaction);
- J_ASSERT_JH(jh, jh->b_next_transaction == transaction);
+ if (unlikely(jh->b_transaction !=
+ journal->j_committing_transaction)) {
+ printk(KERN_EMERG "JBD: %s: "
+ "jh->b_transaction (%llu, %p, %u) != "
+ "journal->j_committing_transaction (%p, %u)",
+ journal->j_devname,
+ (unsigned long long) bh->b_blocknr,
+ jh->b_transaction,
+ jh->b_transaction ? jh->b_transaction->t_tid : 0,
+ journal->j_committing_transaction,
+ journal->j_committing_transaction ?
+ journal->j_committing_transaction->t_tid : 0);
+ ret = -EINVAL;
+ }
+ if (unlikely(jh->b_next_transaction != transaction)) {
+ printk(KERN_EMERG "JBD: %s: "
+ "jh->b_next_transaction (%llu, %p, %u) != "
+ "transaction (%p, %u)",
+ journal->j_devname,
+ (unsigned long long) bh->b_blocknr,
+ jh->b_next_transaction,
+ jh->b_next_transaction ?
+ jh->b_next_transaction->t_tid : 0,
+ transaction, transaction->t_tid);
+ ret = -EINVAL;
+ }
/* And this case is illegal: we can't reuse another
* transaction's data buffer, ever. */
goto out_unlock_bh;
@@ -1127,7 +1172,8 @@
jbd_unlock_bh_state(bh);
out:
JBUFFER_TRACE(jh, "exit");
- return 0;
+ WARN_ON(ret); /* All errors are bugs, so dump the stack */
+ return ret;
}
/*
diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c
index 9659b7c..be6169b 100644
--- a/fs/jffs2/dir.c
+++ b/fs/jffs2/dir.c
@@ -245,7 +245,7 @@
ret = jffs2_do_unlink(c, dir_f, dentry->d_name.name,
dentry->d_name.len, dead_f, now);
if (dead_f->inocache)
- dentry->d_inode->i_nlink = dead_f->inocache->pino_nlink;
+ set_nlink(dentry->d_inode, dead_f->inocache->pino_nlink);
if (!ret)
dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
return ret;
@@ -278,7 +278,7 @@
if (!ret) {
mutex_lock(&f->sem);
- old_dentry->d_inode->i_nlink = ++f->inocache->pino_nlink;
+ set_nlink(old_dentry->d_inode, ++f->inocache->pino_nlink);
mutex_unlock(&f->sem);
d_instantiate(dentry, old_dentry->d_inode);
dir_i->i_mtime = dir_i->i_ctime = ITIME(now);
@@ -497,7 +497,7 @@
f = JFFS2_INODE_INFO(inode);
/* Directories get nlink 2 at start */
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
/* but ic->pino_nlink is the parent ino# */
f->inocache->pino_nlink = dir_i->i_ino;
diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c
index bbcb975..7286e44 100644
--- a/fs/jffs2/fs.c
+++ b/fs/jffs2/fs.c
@@ -278,7 +278,7 @@
inode->i_mtime = ITIME(je32_to_cpu(latest_node.mtime));
inode->i_ctime = ITIME(je32_to_cpu(latest_node.ctime));
- inode->i_nlink = f->inocache->pino_nlink;
+ set_nlink(inode, f->inocache->pino_nlink);
inode->i_blocks = (inode->i_size + 511) >> 9;
@@ -291,7 +291,7 @@
case S_IFDIR:
{
struct jffs2_full_dirent *fd;
- inode->i_nlink = 2; /* parent and '.' */
+ set_nlink(inode, 2); /* parent and '.' */
for (fd=f->dents; fd; fd = fd->next) {
if (fd->type == DT_DIR && fd->ino)
@@ -453,7 +453,7 @@
iput(inode);
return ERR_PTR(ret);
}
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_ino = je32_to_cpu(ri->ino);
inode->i_mode = jemode_to_cpu(ri->mode);
inode->i_gid = je16_to_cpu(ri->gid);
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index b78b2f9..1b6f15f 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -457,7 +457,7 @@
/* read the page of fixed disk inode (AIT) in raw mode */
mp = read_metapage(ip, address << sbi->l2nbperpage, PSIZE, 1);
if (mp == NULL) {
- ip->i_nlink = 1; /* Don't want iput() deleting it */
+ set_nlink(ip, 1); /* Don't want iput() deleting it */
iput(ip);
return (NULL);
}
@@ -469,7 +469,7 @@
/* copy on-disk inode to in-memory inode */
if ((copy_from_dinode(dp, ip)) != 0) {
/* handle bad return by returning NULL for ip */
- ip->i_nlink = 1; /* Don't want iput() deleting it */
+ set_nlink(ip, 1); /* Don't want iput() deleting it */
iput(ip);
/* release the page */
release_metapage(mp);
@@ -3076,7 +3076,7 @@
ip->i_mode |= 0001;
}
}
- ip->i_nlink = le32_to_cpu(dip->di_nlink);
+ set_nlink(ip, le32_to_cpu(dip->di_nlink));
jfs_ip->saved_uid = le32_to_cpu(dip->di_uid);
if (sbi->uid == -1)
diff --git a/fs/jfs/jfs_inode.c b/fs/jfs/jfs_inode.c
index 2686531..c1a3e60 100644
--- a/fs/jfs/jfs_inode.c
+++ b/fs/jfs/jfs_inode.c
@@ -157,7 +157,7 @@
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
fail_unlock:
- inode->i_nlink = 0;
+ clear_nlink(inode);
unlock_new_inode(inode);
fail_put:
iput(inode);
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index e17545e..a112ad9 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -172,7 +172,7 @@
mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
@@ -292,7 +292,7 @@
goto out3;
}
- ip->i_nlink = 2; /* for '.' */
+ set_nlink(ip, 2); /* for '.' */
ip->i_op = &jfs_dir_inode_operations;
ip->i_fop = &jfs_dir_operations;
@@ -311,7 +311,7 @@
mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
@@ -844,7 +844,7 @@
rc = txCommit(tid, 2, &iplist[0], 0);
if (rc) {
- ip->i_nlink--; /* never instantiated */
+ drop_nlink(ip); /* never instantiated */
iput(ip);
} else
d_instantiate(dentry, ip);
@@ -1048,7 +1048,7 @@
mutex_unlock(&JFS_IP(dip)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
@@ -1433,7 +1433,7 @@
mutex_unlock(&JFS_IP(dir)->commit_mutex);
if (rc) {
free_ea_wmap(ip);
- ip->i_nlink = 0;
+ clear_nlink(ip);
unlock_new_inode(ip);
iput(ip);
} else {
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 06c8a67..a44eff0 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -485,7 +485,6 @@
goto out_unload;
}
inode->i_ino = 0;
- inode->i_nlink = 1;
inode->i_size = sb->s_bdev->bd_inode->i_size;
inode->i_mapping->a_ops = &jfs_metapage_aops;
insert_inode_hash(inode);
diff --git a/fs/libfs.c b/fs/libfs.c
index c18e9a1..f6d411e 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -490,7 +490,7 @@
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
root = d_alloc_root(inode);
if (!root) {
iput(inode);
@@ -510,8 +510,10 @@
if (!dentry)
goto out;
inode = new_inode(s);
- if (!inode)
+ if (!inode) {
+ dput(dentry);
goto out;
+ }
inode->i_mode = S_IFREG | files->mode;
inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
inode->i_fop = files->ops;
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index b3ff3d8..b7d7f67 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -197,7 +197,7 @@
{
int ret;
- inode->i_nlink--;
+ drop_nlink(inode);
ret = write_inode(inode);
LOGFS_BUG_ON(ret, inode->i_sb);
return ret;
@@ -433,7 +433,7 @@
ta = kzalloc(sizeof(*ta), GFP_KERNEL);
if (!ta) {
- inode->i_nlink--;
+ drop_nlink(inode);
iput(inode);
return -ENOMEM;
}
@@ -456,7 +456,7 @@
abort_transaction(inode, ta);
li->li_flags |= LOGFS_IF_STILLBORN;
/* FIXME: truncate symlink */
- inode->i_nlink--;
+ drop_nlink(inode);
iput(inode);
goto out;
}
@@ -563,7 +563,7 @@
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME;
ihold(inode);
- inode->i_nlink++;
+ inc_nlink(inode);
mark_inode_dirty_sync(inode);
return __logfs_create(dir, dentry, inode, NULL, 0);
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index edfea7a..7e441ad 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -93,7 +93,7 @@
/* inode->i_nlink == 0 can be true when called from
* block validator */
/* set i_nlink to 0 to prevent caching */
- inode->i_nlink = 0;
+ clear_nlink(inode);
logfs_inode(inode)->li_flags |= LOGFS_IF_ZOMBIE;
iget_failed(inode);
if (!err)
@@ -199,7 +199,6 @@
inode->i_blocks = 0;
inode->i_ctime = CURRENT_TIME;
inode->i_mtime = CURRENT_TIME;
- inode->i_nlink = 1;
li->li_refcount = 1;
INIT_LIST_HEAD(&li->li_freeing_list);
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index d8d0938..2ac4217 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -126,7 +126,7 @@
inode->i_atime = be64_to_timespec(di->di_atime);
inode->i_ctime = be64_to_timespec(di->di_ctime);
inode->i_mtime = be64_to_timespec(di->di_mtime);
- inode->i_nlink = be32_to_cpu(di->di_refcount);
+ set_nlink(inode, be32_to_cpu(di->di_refcount));
inode->i_generation = be32_to_cpu(di->di_generation);
switch (inode->i_mode & S_IFMT) {
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index e7d23e2..64cdcd6 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -446,7 +446,7 @@
inode->i_mode = raw_inode->i_mode;
inode->i_uid = (uid_t)raw_inode->i_uid;
inode->i_gid = (gid_t)raw_inode->i_gid;
- inode->i_nlink = raw_inode->i_nlinks;
+ set_nlink(inode, raw_inode->i_nlinks);
inode->i_size = raw_inode->i_size;
inode->i_mtime.tv_sec = inode->i_atime.tv_sec = inode->i_ctime.tv_sec = raw_inode->i_time;
inode->i_mtime.tv_nsec = 0;
@@ -479,7 +479,7 @@
inode->i_mode = raw_inode->i_mode;
inode->i_uid = (uid_t)raw_inode->i_uid;
inode->i_gid = (gid_t)raw_inode->i_gid;
- inode->i_nlink = raw_inode->i_nlinks;
+ set_nlink(inode, raw_inode->i_nlinks);
inode->i_size = raw_inode->i_size;
inode->i_mtime.tv_sec = raw_inode->i_mtime;
inode->i_atime.tv_sec = raw_inode->i_atime;
diff --git a/fs/namei.c b/fs/namei.c
index 7657be4..ac6d214 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -137,7 +137,7 @@
return retval;
}
-static char *getname_flags(const char __user * filename, int flags)
+static char *getname_flags(const char __user *filename, int flags, int *empty)
{
char *tmp, *result;
@@ -148,6 +148,8 @@
result = tmp;
if (retval < 0) {
+ if (retval == -ENOENT && empty)
+ *empty = 1;
if (retval != -ENOENT || !(flags & LOOKUP_EMPTY)) {
__putname(tmp);
result = ERR_PTR(retval);
@@ -160,7 +162,7 @@
char *getname(const char __user * filename)
{
- return getname_flags(filename, 0);
+ return getname_flags(filename, 0, 0);
}
#ifdef CONFIG_AUDITSYSCALL
@@ -1798,11 +1800,11 @@
return __lookup_hash(&this, base, NULL);
}
-int user_path_at(int dfd, const char __user *name, unsigned flags,
- struct path *path)
+int user_path_at_empty(int dfd, const char __user *name, unsigned flags,
+ struct path *path, int *empty)
{
struct nameidata nd;
- char *tmp = getname_flags(name, flags);
+ char *tmp = getname_flags(name, flags, empty);
int err = PTR_ERR(tmp);
if (!IS_ERR(tmp)) {
@@ -1816,6 +1818,12 @@
return err;
}
+int user_path_at(int dfd, const char __user *name, unsigned flags,
+ struct path *path)
+{
+ return user_path_at_empty(dfd, name, flags, path, 0);
+}
+
static int user_path_parent(int dfd, const char __user *path,
struct nameidata *nd, char **name)
{
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 202f370..5b5fa33 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -228,7 +228,7 @@
DDPRINTK("ncp_read_inode: inode->i_mode = %u\n", inode->i_mode);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_uid = server->m.uid;
inode->i_gid = server->m.gid;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 4dc6d07..c07a55a 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -320,7 +320,7 @@
memset(&inode->i_ctime, 0, sizeof(inode->i_ctime));
inode->i_version = 0;
inode->i_size = 0;
- inode->i_nlink = 0;
+ clear_nlink(inode);
inode->i_uid = -2;
inode->i_gid = -2;
inode->i_blocks = 0;
@@ -355,7 +355,7 @@
| NFS_INO_INVALID_DATA
| NFS_INO_REVAL_PAGECACHE;
if (fattr->valid & NFS_ATTR_FATTR_NLINK)
- inode->i_nlink = fattr->nlink;
+ set_nlink(inode, fattr->nlink);
else if (nfs_server_capable(inode, NFS_CAP_NLINK))
nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
if (fattr->valid & NFS_ATTR_FATTR_OWNER)
@@ -1361,7 +1361,7 @@
invalid |= NFS_INO_INVALID_ATTR;
if (S_ISDIR(inode->i_mode))
invalid |= NFS_INO_INVALID_DATA;
- inode->i_nlink = fattr->nlink;
+ set_nlink(inode, fattr->nlink);
}
} else if (server->caps & NFS_CAP_NLINK)
invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 66d095d..b6fa792 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -655,7 +655,7 @@
default:
return nfserr_bad_xdr;
}
- w &= !NFS4_SHARE_ACCESS_MASK;
+ w &= ~NFS4_SHARE_ACCESS_MASK;
if (!w)
return nfs_ok;
if (!argp->minorversion)
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 666628b..b50ffb7 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -354,7 +354,7 @@
failed_acl:
failed_bmap:
- inode->i_nlink = 0;
+ clear_nlink(inode);
iput(inode); /* raw_inode will be deleted through
generic_delete_inode() */
goto failed;
@@ -396,7 +396,7 @@
inode->i_mode = le16_to_cpu(raw_inode->i_mode);
inode->i_uid = (uid_t)le32_to_cpu(raw_inode->i_uid);
inode->i_gid = (gid_t)le32_to_cpu(raw_inode->i_gid);
- inode->i_nlink = le16_to_cpu(raw_inode->i_links_count);
+ set_nlink(inode, le16_to_cpu(raw_inode->i_links_count));
inode->i_size = le64_to_cpu(raw_inode->i_size);
inode->i_atime.tv_sec = le64_to_cpu(raw_inode->i_mtime);
inode->i_ctime.tv_sec = le64_to_cpu(raw_inode->i_ctime);
diff --git a/fs/nilfs2/namei.c b/fs/nilfs2/namei.c
index a314199..768982d 100644
--- a/fs/nilfs2/namei.c
+++ b/fs/nilfs2/namei.c
@@ -289,7 +289,7 @@
nilfs_warning(inode->i_sb, __func__,
"deleting nonexistent file (%lu), %d\n",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
err = nilfs_delete_entry(de, page);
if (err)
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 1371487..97e2dac 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -612,7 +612,7 @@
* might be tricky due to vfs interactions. Need to think about this
* some more when implementing the unlink command.
*/
- vi->i_nlink = le16_to_cpu(m->link_count);
+ set_nlink(vi, le16_to_cpu(m->link_count));
/*
* FIXME: Reparse points can have the directory bit set even though
* they would be S_IFLNK. Need to deal with this further below when we
@@ -634,7 +634,7 @@
vi->i_mode &= ~vol->dmask;
/* Things break without this kludge! */
if (vi->i_nlink > 1)
- vi->i_nlink = 1;
+ set_nlink(vi, 1);
} else {
vi->i_mode |= S_IFREG;
/* Apply the file permissions mask set in the mount options. */
@@ -1242,7 +1242,7 @@
vi->i_version = base_vi->i_version;
vi->i_uid = base_vi->i_uid;
vi->i_gid = base_vi->i_gid;
- vi->i_nlink = base_vi->i_nlink;
+ set_nlink(vi, base_vi->i_nlink);
vi->i_mtime = base_vi->i_mtime;
vi->i_ctime = base_vi->i_ctime;
vi->i_atime = base_vi->i_atime;
@@ -1508,7 +1508,7 @@
vi->i_version = base_vi->i_version;
vi->i_uid = base_vi->i_uid;
vi->i_gid = base_vi->i_gid;
- vi->i_nlink = base_vi->i_nlink;
+ set_nlink(vi, base_vi->i_nlink);
vi->i_mtime = base_vi->i_mtime;
vi->i_ctime = base_vi->i_ctime;
vi->i_atime = base_vi->i_atime;
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 8582e3f..e2878b5 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2292,7 +2292,7 @@
ocfs2_journal_dirty(handle, di_bh);
i_size_write(inode, size);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_blocks = ocfs2_inode_sector_count(inode);
ret = ocfs2_mark_inode_dirty(handle, inode, di_bh);
@@ -2354,7 +2354,7 @@
ocfs2_journal_dirty(handle, new_bh);
i_size_write(inode, inode->i_sb->s_blocksize);
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
inode->i_blocks = ocfs2_inode_sector_count(inode);
status = ocfs2_mark_inode_dirty(handle, inode, fe_bh);
if (status < 0) {
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 7642d7c..e1ed5e5 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2092,7 +2092,7 @@
inode->i_uid = be32_to_cpu(lvb->lvb_iuid);
inode->i_gid = be32_to_cpu(lvb->lvb_igid);
inode->i_mode = be16_to_cpu(lvb->lvb_imode);
- inode->i_nlink = be16_to_cpu(lvb->lvb_inlink);
+ set_nlink(inode, be16_to_cpu(lvb->lvb_inlink));
ocfs2_unpack_timespec(&inode->i_atime,
be64_to_cpu(lvb->lvb_iatime_packed));
ocfs2_unpack_timespec(&inode->i_mtime,
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index b4c8bb6..a22d2c0 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -291,7 +291,7 @@
(unsigned long long)OCFS2_I(inode)->ip_blkno,
(unsigned long long)le64_to_cpu(fe->i_blkno));
- inode->i_nlink = ocfs2_read_links_count(fe);
+ set_nlink(inode, ocfs2_read_links_count(fe));
trace_ocfs2_populate_inode(OCFS2_I(inode)->ip_blkno,
le32_to_cpu(fe->i_flags));
@@ -1290,7 +1290,7 @@
OCFS2_I(inode)->ip_dyn_features = le16_to_cpu(fe->i_dyn_features);
ocfs2_set_inode_flags(inode);
i_size_write(inode, le64_to_cpu(fe->i_size));
- inode->i_nlink = ocfs2_read_links_count(fe);
+ set_nlink(inode, ocfs2_read_links_count(fe));
inode->i_uid = le32_to_cpu(fe->i_uid);
inode->i_gid = le32_to_cpu(fe->i_gid);
inode->i_mode = le16_to_cpu(fe->i_mode);
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 53aa41e..a8b2bfe 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -199,9 +199,7 @@
* these are used by the support functions here and in
* callers. */
if (S_ISDIR(mode))
- inode->i_nlink = 2;
- else
- inode->i_nlink = 1;
+ set_nlink(inode, 2);
inode_init_owner(inode, dir, mode);
dquot_initialize(inode);
return inode;
@@ -1379,7 +1377,7 @@
}
if (new_inode) {
- new_inode->i_nlink--;
+ drop_nlink(new_inode);
new_inode->i_ctime = CURRENT_TIME;
}
old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME;
@@ -1387,9 +1385,9 @@
if (update_dot_dot) {
status = ocfs2_update_entry(old_inode, handle,
&old_inode_dot_dot_res, new_dir);
- old_dir->i_nlink--;
+ drop_nlink(old_dir);
if (new_inode) {
- new_inode->i_nlink--;
+ drop_nlink(new_inode);
} else {
inc_nlink(new_dir);
mark_inode_dirty(new_dir);
@@ -2018,7 +2016,7 @@
orphan_fe = (struct ocfs2_dinode *) orphan_dir_bh->b_data;
if (S_ISDIR(inode->i_mode))
ocfs2_add_links_count(orphan_fe, 1);
- orphan_dir_inode->i_nlink = ocfs2_read_links_count(orphan_fe);
+ set_nlink(orphan_dir_inode, ocfs2_read_links_count(orphan_fe));
ocfs2_journal_dirty(handle, orphan_dir_bh);
status = __ocfs2_add_entry(handle, orphan_dir_inode, name,
@@ -2116,7 +2114,7 @@
orphan_fe = (struct ocfs2_dinode *) orphan_dir_bh->b_data;
if (S_ISDIR(inode->i_mode))
ocfs2_add_links_count(orphan_fe, -1);
- orphan_dir_inode->i_nlink = ocfs2_read_links_count(orphan_fe);
+ set_nlink(orphan_dir_inode, ocfs2_read_links_count(orphan_fe));
ocfs2_journal_dirty(handle, orphan_dir_bh);
leave:
@@ -2282,7 +2280,7 @@
goto leave;
}
- inode->i_nlink = 0;
+ clear_nlink(inode);
/* do the real work now. */
status = __ocfs2_mknod_locked(dir, inode,
0, &new_di_bh, parent_di_bh, handle,
@@ -2437,7 +2435,7 @@
di = (struct ocfs2_dinode *)di_bh->b_data;
le32_add_cpu(&di->i_flags, -OCFS2_ORPHANED_FL);
di->i_orphaned_slot = 0;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
ocfs2_set_links_count(di, inode->i_nlink);
ocfs2_journal_dirty(handle, di_bh);
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index a2a5bff..e4e0ff7 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -242,7 +242,7 @@
inode->i_mode = S_IFDIR | S_IRUGO | S_IXUGO;
inode->i_op = &openprom_inode_operations;
inode->i_fop = &openprom_operations;
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
break;
case op_inode_prop:
if (!strcmp(dp->name, "options") && (len == 17) &&
@@ -251,7 +251,7 @@
else
inode->i_mode = S_IFREG | S_IRUGO;
inode->i_fop = &openpromfs_prop_ops;
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_size = ent_oi->u.prop->length;
break;
}
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 8f0087e..2db1bd3 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1652,12 +1652,46 @@
return error;
}
+static int proc_pid_fd_link_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct inode *inode = dentry->d_inode;
+ struct task_struct *task = get_proc_task(inode);
+ int rc;
+
+ if (task == NULL)
+ return -ESRCH;
+
+ rc = -EACCES;
+ if (lock_trace(task))
+ goto out_task;
+
+ generic_fillattr(inode, stat);
+ unlock_trace(task);
+ rc = 0;
+out_task:
+ put_task_struct(task);
+ return rc;
+}
+
static const struct inode_operations proc_pid_link_inode_operations = {
.readlink = proc_pid_readlink,
.follow_link = proc_pid_follow_link,
.setattr = proc_setattr,
};
+static const struct inode_operations proc_fdinfo_link_inode_operations = {
+ .setattr = proc_setattr,
+ .getattr = proc_pid_fd_link_getattr,
+};
+
+static const struct inode_operations proc_fd_link_inode_operations = {
+ .readlink = proc_pid_readlink,
+ .follow_link = proc_pid_follow_link,
+ .setattr = proc_setattr,
+ .getattr = proc_pid_fd_link_getattr,
+};
+
/* building an inode */
@@ -1889,49 +1923,61 @@
static int proc_fd_info(struct inode *inode, struct path *path, char *info)
{
- struct task_struct *task = get_proc_task(inode);
- struct files_struct *files = NULL;
+ struct task_struct *task;
+ struct files_struct *files;
struct file *file;
int fd = proc_fd(inode);
+ int rc;
- if (task) {
- files = get_files_struct(task);
- put_task_struct(task);
- }
- if (files) {
- /*
- * We are not taking a ref to the file structure, so we must
- * hold ->file_lock.
- */
- spin_lock(&files->file_lock);
- file = fcheck_files(files, fd);
- if (file) {
- unsigned int f_flags;
- struct fdtable *fdt;
+ task = get_proc_task(inode);
+ if (!task)
+ return -ENOENT;
- fdt = files_fdtable(files);
- f_flags = file->f_flags & ~O_CLOEXEC;
- if (FD_ISSET(fd, fdt->close_on_exec))
- f_flags |= O_CLOEXEC;
+ rc = -EACCES;
+ if (lock_trace(task))
+ goto out_task;
- if (path) {
- *path = file->f_path;
- path_get(&file->f_path);
- }
- if (info)
- snprintf(info, PROC_FDINFO_MAX,
- "pos:\t%lli\n"
- "flags:\t0%o\n",
- (long long) file->f_pos,
- f_flags);
- spin_unlock(&files->file_lock);
- put_files_struct(files);
- return 0;
+ rc = -ENOENT;
+ files = get_files_struct(task);
+ if (files == NULL)
+ goto out_unlock;
+
+ /*
+ * We are not taking a ref to the file structure, so we must
+ * hold ->file_lock.
+ */
+ spin_lock(&files->file_lock);
+ file = fcheck_files(files, fd);
+ if (file) {
+ unsigned int f_flags;
+ struct fdtable *fdt;
+
+ fdt = files_fdtable(files);
+ f_flags = file->f_flags & ~O_CLOEXEC;
+ if (FD_ISSET(fd, fdt->close_on_exec))
+ f_flags |= O_CLOEXEC;
+
+ if (path) {
+ *path = file->f_path;
+ path_get(&file->f_path);
}
- spin_unlock(&files->file_lock);
- put_files_struct(files);
- }
- return -ENOENT;
+ if (info)
+ snprintf(info, PROC_FDINFO_MAX,
+ "pos:\t%lli\n"
+ "flags:\t0%o\n",
+ (long long) file->f_pos,
+ f_flags);
+ rc = 0;
+ } else
+ rc = -ENOENT;
+ spin_unlock(&files->file_lock);
+ put_files_struct(files);
+
+out_unlock:
+ unlock_trace(task);
+out_task:
+ put_task_struct(task);
+ return rc;
}
static int proc_fd_link(struct inode *inode, struct path *path)
@@ -2026,7 +2072,7 @@
spin_unlock(&files->file_lock);
put_files_struct(files);
- inode->i_op = &proc_pid_link_inode_operations;
+ inode->i_op = &proc_fd_link_inode_operations;
inode->i_size = 64;
ei->op.proc_get_link = proc_fd_link;
d_set_d_op(dentry, &tid_fd_dentry_operations);
@@ -2058,7 +2104,12 @@
if (fd == ~0U)
goto out;
+ result = ERR_PTR(-EACCES);
+ if (lock_trace(task))
+ goto out;
+
result = instantiate(dir, dentry, task, &fd);
+ unlock_trace(task);
out:
put_task_struct(task);
out_no_task:
@@ -2078,23 +2129,28 @@
retval = -ENOENT;
if (!p)
goto out_no_task;
+
+ retval = -EACCES;
+ if (lock_trace(p))
+ goto out;
+
retval = 0;
fd = filp->f_pos;
switch (fd) {
case 0:
if (filldir(dirent, ".", 1, 0, inode->i_ino, DT_DIR) < 0)
- goto out;
+ goto out_unlock;
filp->f_pos++;
case 1:
ino = parent_ino(dentry);
if (filldir(dirent, "..", 2, 1, ino, DT_DIR) < 0)
- goto out;
+ goto out_unlock;
filp->f_pos++;
default:
files = get_files_struct(p);
if (!files)
- goto out;
+ goto out_unlock;
rcu_read_lock();
for (fd = filp->f_pos-2;
fd < files_fdtable(files)->max_fds;
@@ -2118,6 +2174,9 @@
rcu_read_unlock();
put_files_struct(files);
}
+
+out_unlock:
+ unlock_trace(p);
out:
put_task_struct(p);
out_no_task:
@@ -2195,6 +2254,7 @@
ei->fd = fd;
inode->i_mode = S_IFREG | S_IRUSR;
inode->i_fop = &proc_fdinfo_file_operations;
+ inode->i_op = &proc_fdinfo_link_inode_operations;
d_set_d_op(dentry, &tid_fd_dentry_operations);
d_add(dentry, inode);
/* Close the race of the process dying before we return the dentry */
@@ -2248,7 +2308,7 @@
ei = PROC_I(inode);
inode->i_mode = p->mode;
if (S_ISDIR(inode->i_mode))
- inode->i_nlink = 2; /* Use getattr to fix if necessary */
+ set_nlink(inode, 2); /* Use getattr to fix if necessary */
if (p->iop)
inode->i_op = p->iop;
if (p->fop)
@@ -2642,7 +2702,7 @@
inode->i_mode = p->mode;
if (S_ISDIR(inode->i_mode))
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
if (S_ISLNK(inode->i_mode))
inode->i_size = 64;
if (p->iop)
@@ -2981,8 +3041,8 @@
inode->i_fop = &proc_tgid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff,
- ARRAY_SIZE(tgid_base_stuff));
+ set_nlink(inode, 2 + pid_entry_count_dirs(tgid_base_stuff,
+ ARRAY_SIZE(tgid_base_stuff)));
d_set_d_op(dentry, &pid_dentry_operations);
@@ -3233,8 +3293,8 @@
inode->i_fop = &proc_tid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff,
- ARRAY_SIZE(tid_base_stuff));
+ set_nlink(inode, 2 + pid_entry_count_dirs(tid_base_stuff,
+ ARRAY_SIZE(tid_base_stuff)));
d_set_d_op(dentry, &pid_dentry_operations);
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 9d99131..10090d9 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -283,7 +283,7 @@
struct inode *inode = dentry->d_inode;
struct proc_dir_entry *de = PROC_I(inode)->pde;
if (de && de->nlink)
- inode->i_nlink = de->nlink;
+ set_nlink(inode, de->nlink);
generic_fillattr(inode, stat);
return 0;
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 7ed72d6..7737c54 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -445,7 +445,7 @@
if (de->size)
inode->i_size = de->size;
if (de->nlink)
- inode->i_nlink = de->nlink;
+ set_nlink(inode, de->nlink);
if (de->proc_iops)
inode->i_op = de->proc_iops;
if (de->proc_fops) {
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index 1a77dbe..a6b6217 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -3,6 +3,7 @@
*/
#include <linux/init.h>
#include <linux/sysctl.h>
+#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/security.h>
#include <linux/namei.h>
@@ -14,6 +15,15 @@
static const struct file_operations proc_sys_dir_file_operations;
static const struct inode_operations proc_sys_dir_operations;
+void proc_sys_poll_notify(struct ctl_table_poll *poll)
+{
+ if (!poll)
+ return;
+
+ atomic_inc(&poll->event);
+ wake_up_interruptible(&poll->wait);
+}
+
static struct inode *proc_sys_make_inode(struct super_block *sb,
struct ctl_table_header *head, struct ctl_table *table)
{
@@ -39,7 +49,7 @@
inode->i_fop = &proc_sys_file_operations;
} else {
inode->i_mode |= S_IFDIR;
- inode->i_nlink = 0;
+ clear_nlink(inode);
inode->i_op = &proc_sys_dir_operations;
inode->i_fop = &proc_sys_dir_file_operations;
}
@@ -176,6 +186,39 @@
return proc_sys_call_handler(filp, (void __user *)buf, count, ppos, 1);
}
+static int proc_sys_open(struct inode *inode, struct file *filp)
+{
+ struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+
+ if (table->poll)
+ filp->private_data = proc_sys_poll_event(table->poll);
+
+ return 0;
+}
+
+static unsigned int proc_sys_poll(struct file *filp, poll_table *wait)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ struct ctl_table *table = PROC_I(inode)->sysctl_entry;
+ unsigned long event = (unsigned long)filp->private_data;
+ unsigned int ret = DEFAULT_POLLMASK;
+
+ if (!table->proc_handler)
+ goto out;
+
+ if (!table->poll)
+ goto out;
+
+ poll_wait(filp, &table->poll->wait, wait);
+
+ if (event != atomic_read(&table->poll->event)) {
+ filp->private_data = proc_sys_poll_event(table->poll);
+ ret = POLLIN | POLLRDNORM | POLLERR | POLLPRI;
+ }
+
+out:
+ return ret;
+}
static int proc_sys_fill_cache(struct file *filp, void *dirent,
filldir_t filldir,
@@ -364,12 +407,15 @@
}
static const struct file_operations proc_sys_file_operations = {
+ .open = proc_sys_open,
+ .poll = proc_sys_poll,
.read = proc_sys_read,
.write = proc_sys_write,
.llseek = default_llseek,
};
static const struct file_operations proc_sys_dir_file_operations = {
+ .read = generic_read_dir,
.readdir = proc_sys_readdir,
.llseek = generic_file_llseek,
};
diff --git a/fs/pstore/inode.c b/fs/pstore/inode.c
index 893b961..379a02d 100644
--- a/fs/pstore/inode.c
+++ b/fs/pstore/inode.c
@@ -24,6 +24,7 @@
#include <linux/highmem.h>
#include <linux/time.h>
#include <linux/init.h>
+#include <linux/list.h>
#include <linux/string.h>
#include <linux/mount.h>
#include <linux/ramfs.h>
@@ -32,13 +33,18 @@
#include <linux/magic.h>
#include <linux/pstore.h>
#include <linux/slab.h>
+#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include "internal.h"
#define PSTORE_NAMELEN 64
+static DEFINE_SPINLOCK(allpstore_lock);
+static LIST_HEAD(allpstore);
+
struct pstore_private {
+ struct list_head list;
struct pstore_info *psi;
enum pstore_type_id type;
u64 id;
@@ -81,8 +87,16 @@
static void pstore_evict_inode(struct inode *inode)
{
+ struct pstore_private *p = inode->i_private;
+ unsigned long flags;
+
end_writeback(inode);
- kfree(inode->i_private);
+ if (p) {
+ spin_lock_irqsave(&allpstore_lock, flags);
+ list_del(&p->list);
+ spin_unlock_irqrestore(&allpstore_lock, flags);
+ kfree(p);
+ }
}
static const struct inode_operations pstore_dir_inode_operations = {
@@ -182,9 +196,23 @@
struct dentry *root = pstore_sb->s_root;
struct dentry *dentry;
struct inode *inode;
- int rc;
+ int rc = 0;
char name[PSTORE_NAMELEN];
- struct pstore_private *private;
+ struct pstore_private *private, *pos;
+ unsigned long flags;
+
+ spin_lock_irqsave(&allpstore_lock, flags);
+ list_for_each_entry(pos, &allpstore, list) {
+ if (pos->type == type &&
+ pos->id == id &&
+ pos->psi == psi) {
+ rc = -EEXIST;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&allpstore_lock, flags);
+ if (rc)
+ return rc;
rc = -ENOMEM;
inode = pstore_get_inode(pstore_sb, root->d_inode, S_IFREG | 0444, 0);
@@ -229,6 +257,10 @@
d_add(dentry, inode);
+ spin_lock_irqsave(&allpstore_lock, flags);
+ list_add(&private->list, &allpstore);
+ spin_unlock_irqrestore(&allpstore_lock, flags);
+
mutex_unlock(&root->d_inode->i_mutex);
return 0;
@@ -277,7 +309,7 @@
goto fail;
}
- pstore_get_records();
+ pstore_get_records(0);
return 0;
fail:
diff --git a/fs/pstore/internal.h b/fs/pstore/internal.h
index 611c1b3..3bde461 100644
--- a/fs/pstore/internal.h
+++ b/fs/pstore/internal.h
@@ -1,5 +1,5 @@
extern void pstore_set_kmsg_bytes(int);
-extern void pstore_get_records(void);
+extern void pstore_get_records(int);
extern int pstore_mkfile(enum pstore_type_id, char *psname, u64 id,
char *data, size_t size,
struct timespec time, struct pstore_info *psi);
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index c5300ec..2bd620f 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -25,12 +25,30 @@
#include <linux/module.h>
#include <linux/pstore.h>
#include <linux/string.h>
+#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
+#include <linux/hardirq.h>
+#include <linux/workqueue.h>
#include "internal.h"
/*
+ * We defer making "oops" entries appear in pstore - see
+ * whether the system is actually still running well enough
+ * to let someone see the entry
+ */
+#define PSTORE_INTERVAL (60 * HZ)
+
+static int pstore_new_entry;
+
+static void pstore_timefunc(unsigned long);
+static DEFINE_TIMER(pstore_timer, pstore_timefunc, 0, 0);
+
+static void pstore_dowork(struct work_struct *);
+static DECLARE_WORK(pstore_work, pstore_dowork);
+
+/*
* pstore_lock just protects "psinfo" during
* calls to pstore_register()
*/
@@ -69,15 +87,22 @@
unsigned long size, total = 0;
char *dst, *why;
u64 id;
- int hsize;
+ int hsize, ret;
unsigned int part = 1;
+ unsigned long flags = 0;
+ int is_locked = 0;
if (reason < ARRAY_SIZE(reason_str))
why = reason_str[reason];
else
why = "Unknown";
- mutex_lock(&psinfo->buf_mutex);
+ if (in_nmi()) {
+ is_locked = spin_trylock(&psinfo->buf_lock);
+ if (!is_locked)
+ pr_err("pstore dump routine blocked in NMI, may corrupt error record\n");
+ } else
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
while (total < kmsg_bytes) {
dst = psinfo->buf;
@@ -97,18 +122,20 @@
memcpy(dst, s1 + s1_start, l1_cpy);
memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
- id = psinfo->write(PSTORE_TYPE_DMESG, part,
+ ret = psinfo->write(PSTORE_TYPE_DMESG, &id, part,
hsize + l1_cpy + l2_cpy, psinfo);
- if (reason == KMSG_DUMP_OOPS && pstore_is_mounted())
- pstore_mkfile(PSTORE_TYPE_DMESG, psinfo->name, id,
- psinfo->buf, hsize + l1_cpy + l2_cpy,
- CURRENT_TIME, psinfo);
+ if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
+ pstore_new_entry = 1;
l1 -= l1_cpy;
l2 -= l2_cpy;
total += l1_cpy + l2_cpy;
part++;
}
- mutex_unlock(&psinfo->buf_mutex);
+ if (in_nmi()) {
+ if (is_locked)
+ spin_unlock(&psinfo->buf_lock);
+ } else
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
}
static struct kmsg_dumper pstore_dumper = {
@@ -148,19 +175,24 @@
}
if (pstore_is_mounted())
- pstore_get_records();
+ pstore_get_records(0);
kmsg_dump_register(&pstore_dumper);
+ pstore_timer.expires = jiffies + PSTORE_INTERVAL;
+ add_timer(&pstore_timer);
+
return 0;
}
EXPORT_SYMBOL_GPL(pstore_register);
/*
- * Read all the records from the persistent store. Create and
- * file files in our filesystem.
+ * Read all the records from the persistent store. Create
+ * files in our filesystem. Don't warn about -EEXIST errors
+ * when we are re-scanning the backing store looking to add new
+ * error records.
*/
-void pstore_get_records(void)
+void pstore_get_records(int quiet)
{
struct pstore_info *psi = psinfo;
ssize_t size;
@@ -168,36 +200,55 @@
enum pstore_type_id type;
struct timespec time;
int failed = 0, rc;
+ unsigned long flags;
if (!psi)
return;
- mutex_lock(&psinfo->buf_mutex);
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
rc = psi->open(psi);
if (rc)
goto out;
while ((size = psi->read(&id, &type, &time, psi)) > 0) {
- if (pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size,
- time, psi))
+ rc = pstore_mkfile(type, psi->name, id, psi->buf, (size_t)size,
+ time, psi);
+ if (rc && (rc != -EEXIST || !quiet))
failed++;
}
psi->close(psi);
out:
- mutex_unlock(&psinfo->buf_mutex);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
if (failed)
printk(KERN_WARNING "pstore: failed to load %d record(s) from '%s'\n",
failed, psi->name);
}
+static void pstore_dowork(struct work_struct *work)
+{
+ pstore_get_records(1);
+}
+
+static void pstore_timefunc(unsigned long dummy)
+{
+ if (pstore_new_entry) {
+ pstore_new_entry = 0;
+ schedule_work(&pstore_work);
+ }
+
+ mod_timer(&pstore_timer, jiffies + PSTORE_INTERVAL);
+}
+
/*
* Call platform driver to write a record to the
* persistent store.
*/
int pstore_write(enum pstore_type_id type, char *buf, size_t size)
{
- u64 id;
+ u64 id;
+ int ret;
+ unsigned long flags;
if (!psinfo)
return -ENODEV;
@@ -205,13 +256,13 @@
if (size > psinfo->bufsize)
return -EFBIG;
- mutex_lock(&psinfo->buf_mutex);
+ spin_lock_irqsave(&psinfo->buf_lock, flags);
memcpy(psinfo->buf, buf, size);
- id = psinfo->write(type, 0, size, psinfo);
- if (pstore_is_mounted())
+ ret = psinfo->write(type, &id, 0, size, psinfo);
+ if (ret == 0 && pstore_is_mounted())
pstore_mkfile(PSTORE_TYPE_DMESG, psinfo->name, id, psinfo->buf,
size, CURRENT_TIME, psinfo);
- mutex_unlock(&psinfo->buf_mutex);
+ spin_unlock_irqrestore(&psinfo->buf_lock, flags);
return 0;
}
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index 2b06466..3bdd214 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -379,7 +379,7 @@
inode->i_mode = le16_to_cpu(raw_inode->di_mode);
inode->i_uid = (uid_t)le16_to_cpu(raw_inode->di_uid);
inode->i_gid = (gid_t)le16_to_cpu(raw_inode->di_gid);
- inode->i_nlink = le16_to_cpu(raw_inode->di_nlink);
+ set_nlink(inode, le16_to_cpu(raw_inode->di_nlink));
inode->i_size = le32_to_cpu(raw_inode->di_size);
inode->i_mtime.tv_sec = le32_to_cpu(raw_inode->di_mtime);
inode->i_mtime.tv_nsec = 0;
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index 10b6be3..aae0edb 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -363,12 +363,15 @@
}
sb = quotactl_block(special);
- if (IS_ERR(sb))
- return PTR_ERR(sb);
+ if (IS_ERR(sb)) {
+ ret = PTR_ERR(sb);
+ goto out;
+ }
ret = do_quotactl(sb, type, cmds, id, addr, pathp);
drop_super(sb);
+out:
if (pathp && !IS_ERR(pathp))
path_put(pathp);
return ret;
diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c
index eacb166..462ceb3 100644
--- a/fs/ramfs/inode.c
+++ b/fs/ramfs/inode.c
@@ -23,7 +23,6 @@
* caches is sufficient.
*/
-#include <linux/module.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
@@ -288,14 +287,7 @@
{
return register_filesystem(&ramfs_fs_type);
}
-
-static void __exit exit_ramfs_fs(void)
-{
- unregister_filesystem(&ramfs_fs_type);
-}
-
module_init(init_ramfs_fs)
-module_exit(exit_ramfs_fs)
int __init init_rootfs(void)
{
@@ -311,5 +303,3 @@
return err;
}
-
-MODULE_LICENSE("GPL");
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 9b0d4b7..950f13a 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1154,7 +1154,7 @@
set_inode_item_key_version(inode, KEY_FORMAT_3_5);
set_inode_sd_version(inode, STAT_DATA_V1);
inode->i_mode = sd_v1_mode(sd);
- inode->i_nlink = sd_v1_nlink(sd);
+ set_nlink(inode, sd_v1_nlink(sd));
inode->i_uid = sd_v1_uid(sd);
inode->i_gid = sd_v1_gid(sd);
inode->i_size = sd_v1_size(sd);
@@ -1199,7 +1199,7 @@
struct stat_data *sd = (struct stat_data *)B_I_PITEM(bh, ih);
inode->i_mode = sd_v2_mode(sd);
- inode->i_nlink = sd_v2_nlink(sd);
+ set_nlink(inode, sd_v2_nlink(sd));
inode->i_uid = sd_v2_uid(sd);
inode->i_size = sd_v2_size(sd);
inode->i_gid = sd_v2_gid(sd);
@@ -1444,7 +1444,7 @@
/* a stale NFS handle can trigger this without it being an error */
pathrelse(&path_to_sd);
reiserfs_make_bad_inode(inode);
- inode->i_nlink = 0;
+ clear_nlink(inode);
return;
}
@@ -1832,7 +1832,7 @@
#endif
/* fill stat data */
- inode->i_nlink = (S_ISDIR(mode) ? 2 : 1);
+ set_nlink(inode, (S_ISDIR(mode) ? 2 : 1));
/* uid and gid must already be set by the caller for quota init */
@@ -1987,7 +1987,7 @@
make_bad_inode(inode);
out_inserted_sd:
- inode->i_nlink = 0;
+ clear_nlink(inode);
th->t_trans_id = 0; /* so the caller can't use this handle later */
unlock_new_inode(inode); /* OK to do even if we hadn't locked it */
iput(inode);
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index ef39232..80058e8 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -19,7 +19,7 @@
#include <linux/reiserfs_xattr.h>
#include <linux/quotaops.h>
-#define INC_DIR_INODE_NLINK(i) if (i->i_nlink != 1) { inc_nlink(i); if (i->i_nlink >= REISERFS_LINK_MAX) i->i_nlink=1; }
+#define INC_DIR_INODE_NLINK(i) if (i->i_nlink != 1) { inc_nlink(i); if (i->i_nlink >= REISERFS_LINK_MAX) set_nlink(i, 1); }
#define DEC_DIR_INODE_NLINK(i) if (i->i_nlink != 1) drop_nlink(i);
// directory item contains array of entry headers. This performs
@@ -622,7 +622,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
if (err)
@@ -702,7 +702,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
if (err)
@@ -787,7 +787,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink = 0;
+ clear_nlink(inode);
DEC_DIR_INODE_NLINK(dir);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
@@ -964,7 +964,7 @@
reiserfs_warning(inode->i_sb, "reiserfs-7042",
"deleting nonexistent file (%lu), %d",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
drop_nlink(inode);
@@ -1086,7 +1086,7 @@
dentry->d_name.len, inode, 1 /*visible */ );
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_update_sd(&th, inode);
err = journal_end(&th, parent_dir->i_sb, jbegin_count);
if (err)
@@ -1129,7 +1129,7 @@
retval = journal_begin(&th, dir->i_sb, jbegin_count);
if (retval) {
- inode->i_nlink--;
+ drop_nlink(inode);
reiserfs_write_unlock(dir->i_sb);
return retval;
}
@@ -1144,7 +1144,7 @@
if (retval) {
int err;
- inode->i_nlink--;
+ drop_nlink(inode);
err = journal_end(&th, dir->i_sb, jbegin_count);
reiserfs_write_unlock(dir->i_sb);
return err ? err : retval;
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index 2305e31..8b4089f 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -337,7 +337,7 @@
inode->i_metasize = (ROMFH_SIZE + nlen + 1 + ROMFH_PAD) & ROMFH_MASK;
inode->i_dataoffset = pos + inode->i_metasize;
- i->i_nlink = 1; /* Hard to decide.. */
+ set_nlink(i, 1); /* Hard to decide.. */
i->i_size = be32_to_cpu(ri.size);
i->i_mtime.tv_sec = i->i_atime.tv_sec = i->i_ctime.tv_sec = 0;
i->i_mtime.tv_nsec = i->i_atime.tv_nsec = i->i_ctime.tv_nsec = 0;
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index 04bebca..fd7b3b3 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -159,7 +159,7 @@
frag_offset = 0;
}
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
inode->i_size = le32_to_cpu(sqsh_ino->file_size);
inode->i_fop = &generic_ro_fops;
inode->i_mode |= S_IFREG;
@@ -203,7 +203,7 @@
}
xattr_id = le32_to_cpu(sqsh_ino->xattr);
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le64_to_cpu(sqsh_ino->file_size);
inode->i_op = &squashfs_inode_ops;
inode->i_fop = &generic_ro_fops;
@@ -232,7 +232,7 @@
if (err < 0)
goto failed_read;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le16_to_cpu(sqsh_ino->file_size);
inode->i_op = &squashfs_dir_inode_ops;
inode->i_fop = &squashfs_dir_ops;
@@ -257,7 +257,7 @@
goto failed_read;
xattr_id = le32_to_cpu(sqsh_ino->xattr);
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le32_to_cpu(sqsh_ino->file_size);
inode->i_op = &squashfs_dir_inode_ops;
inode->i_fop = &squashfs_dir_ops;
@@ -284,7 +284,7 @@
if (err < 0)
goto failed_read;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
inode->i_size = le32_to_cpu(sqsh_ino->symlink_size);
inode->i_op = &squashfs_symlink_inode_ops;
inode->i_data.a_ops = &squashfs_symlink_aops;
@@ -325,7 +325,7 @@
inode->i_mode |= S_IFCHR;
else
inode->i_mode |= S_IFBLK;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
rdev = le32_to_cpu(sqsh_ino->rdev);
init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
@@ -349,7 +349,7 @@
inode->i_mode |= S_IFBLK;
xattr_id = le32_to_cpu(sqsh_ino->xattr);
inode->i_op = &squashfs_inode_ops;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
rdev = le32_to_cpu(sqsh_ino->rdev);
init_special_inode(inode, inode->i_mode, new_decode_dev(rdev));
@@ -370,7 +370,7 @@
inode->i_mode |= S_IFIFO;
else
inode->i_mode |= S_IFSOCK;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
init_special_inode(inode, inode->i_mode, 0);
break;
}
@@ -389,7 +389,7 @@
inode->i_mode |= S_IFSOCK;
xattr_id = le32_to_cpu(sqsh_ino->xattr);
inode->i_op = &squashfs_inode_ops;
- inode->i_nlink = le32_to_cpu(sqsh_ino->nlink);
+ set_nlink(inode, le32_to_cpu(sqsh_ino->nlink));
init_special_inode(inode, inode->i_mode, 0);
break;
}
diff --git a/fs/stack.c b/fs/stack.c
index b4f2ab4..9c11519 100644
--- a/fs/stack.c
+++ b/fs/stack.c
@@ -71,6 +71,6 @@
dest->i_ctime = src->i_ctime;
dest->i_blkbits = src->i_blkbits;
dest->i_flags = src->i_flags;
- dest->i_nlink = src->i_nlink;
+ set_nlink(dest, src->i_nlink);
}
EXPORT_SYMBOL_GPL(fsstack_copy_attr_all);
diff --git a/fs/stat.c b/fs/stat.c
index 78a3aa8..8806b89 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -294,15 +294,16 @@
{
struct path path;
int error;
+ int empty = 0;
if (bufsiz <= 0)
return -EINVAL;
- error = user_path_at(dfd, pathname, LOOKUP_EMPTY, &path);
+ error = user_path_at_empty(dfd, pathname, LOOKUP_EMPTY, &path, &empty);
if (!error) {
struct inode *inode = path.dentry->d_inode;
- error = -EINVAL;
+ error = empty ? -ENOENT : -EINVAL;
if (inode->i_op->readlink) {
error = security_inode_readlink(path.dentry);
if (!error) {
diff --git a/fs/super.c b/fs/super.c
index 32a81f3..afd0f1a 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -727,8 +727,13 @@
if (sb->s_op->remount_fs) {
retval = sb->s_op->remount_fs(sb, &flags, data);
- if (retval)
- return retval;
+ if (retval) {
+ if (!force)
+ return retval;
+ /* If forced remount, go ahead despite any errors */
+ WARN(1, "forced remount of a %s fs returned %i\n",
+ sb->s_type->name, retval);
+ }
}
sb->s_flags = (sb->s_flags & ~MS_RMT_MASK) | (flags & MS_RMT_MASK);
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index e23f288..c81b22f 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -218,7 +218,7 @@
}
if (sysfs_type(sd) == SYSFS_DIR)
- inode->i_nlink = sd->s_dir.subdirs + 2;
+ set_nlink(inode, sd->s_dir.subdirs + 2);
}
int sysfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index 0630eb9..25ffb3e 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -219,7 +219,7 @@
inode->i_mode = fs16_to_cpu(sbi, raw_inode->i_mode);
inode->i_uid = (uid_t)fs16_to_cpu(sbi, raw_inode->i_uid);
inode->i_gid = (gid_t)fs16_to_cpu(sbi, raw_inode->i_gid);
- inode->i_nlink = fs16_to_cpu(sbi, raw_inode->i_nlink);
+ set_nlink(inode, fs16_to_cpu(sbi, raw_inode->i_nlink));
inode->i_size = fs32_to_cpu(sbi, raw_inode->i_size);
inode->i_atime.tv_sec = fs32_to_cpu(sbi, raw_inode->i_atime);
inode->i_mtime.tv_sec = fs32_to_cpu(sbi, raw_inode->i_mtime);
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index b281212..20403dc 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -129,7 +129,7 @@
goto out_ino;
inode->i_flags |= (S_NOCMTIME | S_NOATIME);
- inode->i_nlink = le32_to_cpu(ino->nlink);
+ set_nlink(inode, le32_to_cpu(ino->nlink));
inode->i_uid = le32_to_cpu(ino->uid);
inode->i_gid = le32_to_cpu(ino->gid);
inode->i_atime.tv_sec = (int64_t)le64_to_cpu(ino->atime_sec);
diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c
index 16f19f5..bf18f7a 100644
--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -558,10 +558,10 @@
}
ubifs_assert(inode->i_nlink == 1);
- inode->i_nlink = 0;
+ clear_nlink(inode);
err = remove_xattr(c, host, inode, &nm);
if (err)
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
/* If @i_nlink is 0, 'iput()' will delete the inode */
iput(inode);
diff --git a/fs/udf/balloc.c b/fs/udf/balloc.c
index 95518a9..987585b 100644
--- a/fs/udf/balloc.c
+++ b/fs/udf/balloc.c
@@ -59,8 +59,8 @@
int nr_groups = bitmap->s_nr_groups;
if (block_group >= nr_groups) {
- udf_debug("block_group (%d) > nr_groups (%d)\n", block_group,
- nr_groups);
+ udf_debug("block_group (%d) > nr_groups (%d)\n",
+ block_group, nr_groups);
}
if (bitmap->s_block_bitmap[block_group]) {
@@ -126,8 +126,9 @@
if (bloc->logicalBlockNum + count < count ||
(bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
- bloc->logicalBlockNum, 0, bloc->logicalBlockNum,
- count, partmap->s_partition_len);
+ bloc->logicalBlockNum, 0,
+ bloc->logicalBlockNum, count,
+ partmap->s_partition_len);
goto error_return;
}
@@ -155,7 +156,7 @@
if (udf_set_bit(bit + i, bh->b_data)) {
udf_debug("bit %ld already set\n", bit + i);
udf_debug("byte=%2x\n",
- ((char *)bh->b_data)[(bit + i) >> 3]);
+ ((char *)bh->b_data)[(bit + i) >> 3]);
}
}
udf_add_free_space(sb, sbi->s_partition, count);
@@ -369,7 +370,8 @@
if (bloc->logicalBlockNum + count < count ||
(bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
- bloc->logicalBlockNum, 0, bloc->logicalBlockNum, count,
+ bloc->logicalBlockNum, 0,
+ bloc->logicalBlockNum, count,
partmap->s_partition_len);
goto error_return;
}
diff --git a/fs/udf/directory.c b/fs/udf/directory.c
index 2ffdb67..3e44f57 100644
--- a/fs/udf/directory.c
+++ b/fs/udf/directory.c
@@ -162,8 +162,8 @@
int padlen;
if ((!buffer) || (!offset)) {
- udf_debug("invalidparms\n, buffer=%p, offset=%p\n", buffer,
- offset);
+ udf_debug("invalidparms, buffer=%p, offset=%p\n",
+ buffer, offset);
return NULL;
}
@@ -201,7 +201,7 @@
struct short_ad *sa;
if ((!ptr) || (!offset)) {
- printk(KERN_ERR "udf: udf_get_fileshortad() invalidparms\n");
+ pr_err("%s: invalidparms\n", __func__);
return NULL;
}
@@ -223,7 +223,7 @@
struct long_ad *la;
if ((!ptr) || (!offset)) {
- printk(KERN_ERR "udf: udf_get_filelongad() invalidparms\n");
+ pr_err("%s: invalidparms\n", __func__);
return NULL;
}
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 1d1358e..4fd1d80 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -37,6 +37,7 @@
#include <linux/writeback.h>
#include <linux/slab.h>
#include <linux/crc-itu-t.h>
+#include <linux/mpage.h>
#include "udf_i.h"
#include "udf_sb.h"
@@ -83,12 +84,10 @@
end_writeback(inode);
if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB &&
inode->i_size != iinfo->i_lenExtents) {
- printk(KERN_WARNING "UDF-fs (%s): Inode %lu (mode %o) has "
- "inode size %llu different from extent length %llu. "
- "Filesystem need not be standards compliant.\n",
- inode->i_sb->s_id, inode->i_ino, inode->i_mode,
- (unsigned long long)inode->i_size,
- (unsigned long long)iinfo->i_lenExtents);
+ udf_warn(inode->i_sb, "Inode %lu (mode %o) has inode size %llu different from extent length %llu. Filesystem need not be standards compliant.\n",
+ inode->i_ino, inode->i_mode,
+ (unsigned long long)inode->i_size,
+ (unsigned long long)iinfo->i_lenExtents);
}
kfree(iinfo->i_ext.i_data);
iinfo->i_ext.i_data = NULL;
@@ -104,7 +103,13 @@
static int udf_readpage(struct file *file, struct page *page)
{
- return block_read_full_page(page, udf_get_block);
+ return mpage_readpage(page, udf_get_block);
+}
+
+static int udf_readpages(struct file *file, struct address_space *mapping,
+ struct list_head *pages, unsigned nr_pages)
+{
+ return mpage_readpages(mapping, pages, nr_pages, udf_get_block);
}
static int udf_write_begin(struct file *file, struct address_space *mapping,
@@ -139,6 +144,7 @@
const struct address_space_operations udf_aops = {
.readpage = udf_readpage,
+ .readpages = udf_readpages,
.writepage = udf_writepage,
.write_begin = udf_write_begin,
.write_end = generic_write_end,
@@ -1169,16 +1175,15 @@
*/
bh = udf_read_ptagged(inode->i_sb, &iinfo->i_location, 0, &ident);
if (!bh) {
- printk(KERN_ERR "udf: udf_read_inode(ino %ld) failed !bh\n",
- inode->i_ino);
+ udf_err(inode->i_sb, "(ino %ld) failed !bh\n", inode->i_ino);
make_bad_inode(inode);
return;
}
if (ident != TAG_IDENT_FE && ident != TAG_IDENT_EFE &&
ident != TAG_IDENT_USE) {
- printk(KERN_ERR "udf: udf_read_inode(ino %ld) "
- "failed ident=%d\n", inode->i_ino, ident);
+ udf_err(inode->i_sb, "(ino %ld) failed ident=%d\n",
+ inode->i_ino, ident);
brelse(bh);
make_bad_inode(inode);
return;
@@ -1218,8 +1223,8 @@
}
brelse(ibh);
} else if (fe->icbTag.strategyType != cpu_to_le16(4)) {
- printk(KERN_ERR "udf: unsupported strategy type: %d\n",
- le16_to_cpu(fe->icbTag.strategyType));
+ udf_err(inode->i_sb, "unsupported strategy type: %d\n",
+ le16_to_cpu(fe->icbTag.strategyType));
brelse(bh);
make_bad_inode(inode);
return;
@@ -1236,6 +1241,7 @@
int offset;
struct udf_sb_info *sbi = UDF_SB(inode->i_sb);
struct udf_inode_info *iinfo = UDF_I(inode);
+ unsigned int link_count;
fe = (struct fileEntry *)bh->b_data;
efe = (struct extendedFileEntry *)bh->b_data;
@@ -1318,9 +1324,10 @@
inode->i_mode &= ~sbi->s_umask;
read_unlock(&sbi->s_cred_lock);
- inode->i_nlink = le16_to_cpu(fe->fileLinkCount);
- if (!inode->i_nlink)
- inode->i_nlink = 1;
+ link_count = le16_to_cpu(fe->fileLinkCount);
+ if (!link_count)
+ link_count = 1;
+ set_nlink(inode, link_count);
inode->i_size = le64_to_cpu(fe->informationLength);
iinfo->i_lenExtents = inode->i_size;
@@ -1413,9 +1420,8 @@
udf_debug("METADATA BITMAP FILE-----\n");
break;
default:
- printk(KERN_ERR "udf: udf_fill_inode(ino %ld) failed unknown "
- "file type=%d\n", inode->i_ino,
- fe->icbTag.fileType);
+ udf_err(inode->i_sb, "(ino %ld) failed unknown file type=%d\n",
+ inode->i_ino, fe->icbTag.fileType);
make_bad_inode(inode);
return;
}
@@ -1438,8 +1444,8 @@
iinfo->i_ext.i_data = kmalloc(size, GFP_KERNEL);
if (!iinfo->i_ext.i_data) {
- printk(KERN_ERR "udf:udf_alloc_i_data (ino %ld) "
- "no free memory\n", inode->i_ino);
+ udf_err(inode->i_sb, "(ino %ld) no free memory\n",
+ inode->i_ino);
return -ENOMEM;
}
@@ -1689,9 +1695,8 @@
if (do_sync) {
sync_dirty_buffer(bh);
if (buffer_write_io_error(bh)) {
- printk(KERN_WARNING "IO error syncing udf inode "
- "[%s:%08lx]\n", inode->i_sb->s_id,
- inode->i_ino);
+ udf_warn(inode->i_sb, "IO error syncing udf inode [%08lx]\n",
+ inode->i_ino);
err = -EIO;
}
}
@@ -1982,8 +1987,7 @@
*elen = le32_to_cpu(lad->extLength) & UDF_EXTENT_LENGTH_MASK;
break;
default:
- udf_debug("alloc_type = %d unsupported\n",
- iinfo->i_alloc_type);
+ udf_debug("alloc_type = %d unsupported\n", iinfo->i_alloc_type);
return -1;
}
diff --git a/fs/udf/lowlevel.c b/fs/udf/lowlevel.c
index 43e24a3..6583fe9 100644
--- a/fs/udf/lowlevel.c
+++ b/fs/udf/lowlevel.c
@@ -38,7 +38,7 @@
if (i == 0) {
udf_debug("XA disk: %s, vol_desc_start=%d\n",
- (ms_info.xa_flag ? "yes" : "no"), ms_info.addr.lba);
+ ms_info.xa_flag ? "yes" : "no", ms_info.addr.lba);
if (ms_info.xa_flag) /* necessary for a valid ms_info.addr */
vol_desc_start = ms_info.addr.lba;
} else {
diff --git a/fs/udf/misc.c b/fs/udf/misc.c
index 9215700..c175b4d 100644
--- a/fs/udf/misc.c
+++ b/fs/udf/misc.c
@@ -204,6 +204,7 @@
{
struct tag *tag_p;
struct buffer_head *bh = NULL;
+ u8 checksum;
/* Read the block */
if (block == 0xFFFFFFFF)
@@ -211,8 +212,8 @@
bh = udf_tread(sb, block);
if (!bh) {
- udf_debug("block=%d, location=%d: read failed\n",
- block, location);
+ udf_err(sb, "read failed, block=%u, location=%d\n",
+ block, location);
return NULL;
}
@@ -227,16 +228,18 @@
}
/* Verify the tag checksum */
- if (udf_tag_checksum(tag_p) != tag_p->tagChecksum) {
- printk(KERN_ERR "udf: tag checksum failed block %d\n", block);
+ checksum = udf_tag_checksum(tag_p);
+ if (checksum != tag_p->tagChecksum) {
+ udf_err(sb, "tag checksum failed, block %u: 0x%02x != 0x%02x\n",
+ block, checksum, tag_p->tagChecksum);
goto error_out;
}
/* Verify the tag version */
if (tag_p->descVersion != cpu_to_le16(0x0002U) &&
tag_p->descVersion != cpu_to_le16(0x0003U)) {
- udf_debug("tag version 0x%04x != 0x0002 || 0x0003 block %d\n",
- le16_to_cpu(tag_p->descVersion), block);
+ udf_err(sb, "tag version 0x%04x != 0x0002 || 0x0003, block %u\n",
+ le16_to_cpu(tag_p->descVersion), block);
goto error_out;
}
@@ -248,8 +251,8 @@
return bh;
udf_debug("Crc failure block %d: crc = %d, crclen = %d\n", block,
- le16_to_cpu(tag_p->descCRC), le16_to_cpu(tag_p->descCRCLength));
-
+ le16_to_cpu(tag_p->descCRC),
+ le16_to_cpu(tag_p->descCRCLength));
error_out:
brelse(bh);
return NULL;
diff --git a/fs/udf/namei.c b/fs/udf/namei.c
index f1dce84..4639e13 100644
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -577,8 +577,7 @@
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink--;
- mark_inode_dirty(inode);
+ inode_dec_link_count(inode);
iput(inode);
return err;
}
@@ -618,8 +617,7 @@
init_special_inode(inode, mode, rdev);
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink--;
- mark_inode_dirty(inode);
+ inode_dec_link_count(inode);
iput(inode);
return err;
}
@@ -665,12 +663,11 @@
inode->i_fop = &udf_dir_operations;
fi = udf_add_entry(inode, NULL, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink--;
- mark_inode_dirty(inode);
+ inode_dec_link_count(inode);
iput(inode);
goto out;
}
- inode->i_nlink = 2;
+ set_nlink(inode, 2);
cfi.icb.extLength = cpu_to_le32(inode->i_sb->s_blocksize);
cfi.icb.extLocation = cpu_to_lelb(dinfo->i_location);
*(__le32 *)((struct allocDescImpUse *)cfi.icb.impUse)->impUse =
@@ -683,7 +680,7 @@
fi = udf_add_entry(dir, dentry, &fibh, &cfi, &err);
if (!fi) {
- inode->i_nlink = 0;
+ clear_nlink(inode);
mark_inode_dirty(inode);
iput(inode);
goto out;
@@ -799,9 +796,8 @@
if (retval)
goto end_rmdir;
if (inode->i_nlink != 2)
- udf_warning(inode->i_sb, "udf_rmdir",
- "empty directory has nlink != 2 (%d)",
- inode->i_nlink);
+ udf_warn(inode->i_sb, "empty directory has nlink != 2 (%d)\n",
+ inode->i_nlink);
clear_nlink(inode);
inode->i_size = 0;
inode_dec_link_count(dir);
@@ -840,7 +836,7 @@
if (!inode->i_nlink) {
udf_debug("Deleting nonexistent file (%lu), %d\n",
inode->i_ino, inode->i_nlink);
- inode->i_nlink = 1;
+ set_nlink(inode, 1);
}
retval = udf_delete_entry(dir, fi, &fibh, &cfi);
if (retval)
diff --git a/fs/udf/partition.c b/fs/udf/partition.c
index a71090e..d6caf01 100644
--- a/fs/udf/partition.c
+++ b/fs/udf/partition.c
@@ -33,8 +33,8 @@
struct udf_sb_info *sbi = UDF_SB(sb);
struct udf_part_map *map;
if (partition >= sbi->s_partitions) {
- udf_debug("block=%d, partition=%d, offset=%d: "
- "invalid partition\n", block, partition, offset);
+ udf_debug("block=%d, partition=%d, offset=%d: invalid partition\n",
+ block, partition, offset);
return 0xFFFFFFFF;
}
map = &sbi->s_partmaps[partition];
@@ -60,8 +60,8 @@
vdata = &map->s_type_specific.s_virtual;
if (block > vdata->s_num_entries) {
- udf_debug("Trying to access block beyond end of VAT "
- "(%d max %d)\n", block, vdata->s_num_entries);
+ udf_debug("Trying to access block beyond end of VAT (%d max %d)\n",
+ block, vdata->s_num_entries);
return 0xFFFFFFFF;
}
@@ -321,9 +321,14 @@
/* We shouldn't mount such media... */
BUG_ON(!inode);
retblk = udf_try_read_meta(inode, block, partition, offset);
- if (retblk == 0xFFFFFFFF) {
- udf_warning(sb, __func__, "error reading from METADATA, "
- "trying to read from MIRROR");
+ if (retblk == 0xFFFFFFFF && mdata->s_metadata_fe) {
+ udf_warn(sb, "error reading from METADATA, trying to read from MIRROR\n");
+ if (!(mdata->s_flags & MF_MIRROR_FE_LOADED)) {
+ mdata->s_mirror_fe = udf_find_metadata_inode_efe(sb,
+ mdata->s_mirror_file_loc, map->s_partition_num);
+ mdata->s_flags |= MF_MIRROR_FE_LOADED;
+ }
+
inode = mdata->s_mirror_fe;
if (!inode)
return 0xFFFFFFFF;
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 7b27b06..e185253 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -75,8 +75,6 @@
#define UDF_DEFAULT_BLOCKSIZE 2048
-static char error_buf[1024];
-
/* These are the "meat" - everything else is stuffing */
static int udf_fill_super(struct super_block *, void *, int);
static void udf_put_super(struct super_block *);
@@ -92,8 +90,6 @@
static unsigned int udf_count_free(struct super_block *);
static int udf_statfs(struct dentry *, struct kstatfs *);
static int udf_show_options(struct seq_file *, struct vfsmount *);
-static void udf_error(struct super_block *sb, const char *function,
- const char *fmt, ...);
struct logicalVolIntegrityDescImpUse *udf_sb_lvidiu(struct udf_sb_info *sbi)
{
@@ -244,9 +240,8 @@
sbi->s_partmaps = kcalloc(count, sizeof(struct udf_part_map),
GFP_KERNEL);
if (!sbi->s_partmaps) {
- udf_error(sb, __func__,
- "Unable to allocate space for %d partition maps",
- count);
+ udf_err(sb, "Unable to allocate space for %d partition maps\n",
+ count);
sbi->s_partitions = 0;
return -ENOMEM;
}
@@ -550,8 +545,7 @@
uopt->dmode = option & 0777;
break;
default:
- printk(KERN_ERR "udf: bad mount option \"%s\" "
- "or missing value\n", p);
+ pr_err("bad mount option \"%s\" or missing value\n", p);
return 0;
}
}
@@ -645,20 +639,16 @@
udf_debug("ISO9660 Boot Record found\n");
break;
case 1:
- udf_debug("ISO9660 Primary Volume Descriptor "
- "found\n");
+ udf_debug("ISO9660 Primary Volume Descriptor found\n");
break;
case 2:
- udf_debug("ISO9660 Supplementary Volume "
- "Descriptor found\n");
+ udf_debug("ISO9660 Supplementary Volume Descriptor found\n");
break;
case 3:
- udf_debug("ISO9660 Volume Partition Descriptor "
- "found\n");
+ udf_debug("ISO9660 Volume Partition Descriptor found\n");
break;
case 255:
- udf_debug("ISO9660 Volume Descriptor Set "
- "Terminator found\n");
+ udf_debug("ISO9660 Volume Descriptor Set Terminator found\n");
break;
default:
udf_debug("ISO9660 VRS (%u) found\n",
@@ -809,8 +799,7 @@
pvoldesc->recordingDateAndTime)) {
#ifdef UDFFS_DEBUG
struct timestamp *ts = &pvoldesc->recordingDateAndTime;
- udf_debug("recording time %04u/%02u/%02u"
- " %02u:%02u (%x)\n",
+ udf_debug("recording time %04u/%02u/%02u %02u:%02u (%x)\n",
le16_to_cpu(ts->year), ts->month, ts->day, ts->hour,
ts->minute, le16_to_cpu(ts->typeAndTimezone));
#endif
@@ -821,7 +810,7 @@
strncpy(UDF_SB(sb)->s_volume_ident, outstr->u_name,
outstr->u_len > 31 ? 31 : outstr->u_len);
udf_debug("volIdent[] = '%s'\n",
- UDF_SB(sb)->s_volume_ident);
+ UDF_SB(sb)->s_volume_ident);
}
if (!udf_build_ustr(instr, pvoldesc->volSetIdent, 128))
@@ -837,64 +826,57 @@
return ret;
}
+struct inode *udf_find_metadata_inode_efe(struct super_block *sb,
+ u32 meta_file_loc, u32 partition_num)
+{
+ struct kernel_lb_addr addr;
+ struct inode *metadata_fe;
+
+ addr.logicalBlockNum = meta_file_loc;
+ addr.partitionReferenceNum = partition_num;
+
+ metadata_fe = udf_iget(sb, &addr);
+
+ if (metadata_fe == NULL)
+ udf_warn(sb, "metadata inode efe not found\n");
+ else if (UDF_I(metadata_fe)->i_alloc_type != ICBTAG_FLAG_AD_SHORT) {
+ udf_warn(sb, "metadata inode efe does not have short allocation descriptors!\n");
+ iput(metadata_fe);
+ metadata_fe = NULL;
+ }
+
+ return metadata_fe;
+}
+
static int udf_load_metadata_files(struct super_block *sb, int partition)
{
struct udf_sb_info *sbi = UDF_SB(sb);
struct udf_part_map *map;
struct udf_meta_data *mdata;
struct kernel_lb_addr addr;
- int fe_error = 0;
map = &sbi->s_partmaps[partition];
mdata = &map->s_type_specific.s_metadata;
/* metadata address */
- addr.logicalBlockNum = mdata->s_meta_file_loc;
- addr.partitionReferenceNum = map->s_partition_num;
-
udf_debug("Metadata file location: block = %d part = %d\n",
- addr.logicalBlockNum, addr.partitionReferenceNum);
+ mdata->s_meta_file_loc, map->s_partition_num);
- mdata->s_metadata_fe = udf_iget(sb, &addr);
+ mdata->s_metadata_fe = udf_find_metadata_inode_efe(sb,
+ mdata->s_meta_file_loc, map->s_partition_num);
if (mdata->s_metadata_fe == NULL) {
- udf_warning(sb, __func__, "metadata inode efe not found, "
- "will try mirror inode.");
- fe_error = 1;
- } else if (UDF_I(mdata->s_metadata_fe)->i_alloc_type !=
- ICBTAG_FLAG_AD_SHORT) {
- udf_warning(sb, __func__, "metadata inode efe does not have "
- "short allocation descriptors!");
- fe_error = 1;
- iput(mdata->s_metadata_fe);
- mdata->s_metadata_fe = NULL;
- }
+ /* mirror file entry */
+ udf_debug("Mirror metadata file location: block = %d part = %d\n",
+ mdata->s_mirror_file_loc, map->s_partition_num);
- /* mirror file entry */
- addr.logicalBlockNum = mdata->s_mirror_file_loc;
- addr.partitionReferenceNum = map->s_partition_num;
+ mdata->s_mirror_fe = udf_find_metadata_inode_efe(sb,
+ mdata->s_mirror_file_loc, map->s_partition_num);
- udf_debug("Mirror metadata file location: block = %d part = %d\n",
- addr.logicalBlockNum, addr.partitionReferenceNum);
-
- mdata->s_mirror_fe = udf_iget(sb, &addr);
-
- if (mdata->s_mirror_fe == NULL) {
- if (fe_error) {
- udf_error(sb, __func__, "mirror inode efe not found "
- "and metadata inode is missing too, exiting...");
+ if (mdata->s_mirror_fe == NULL) {
+ udf_err(sb, "Both metadata and mirror metadata inode efe can not found\n");
goto error_exit;
- } else
- udf_warning(sb, __func__, "mirror inode efe not found,"
- " but metadata inode is OK");
- } else if (UDF_I(mdata->s_mirror_fe)->i_alloc_type !=
- ICBTAG_FLAG_AD_SHORT) {
- udf_warning(sb, __func__, "mirror inode efe does not have "
- "short allocation descriptors!");
- iput(mdata->s_mirror_fe);
- mdata->s_mirror_fe = NULL;
- if (fe_error)
- goto error_exit;
+ }
}
/*
@@ -907,18 +889,15 @@
addr.partitionReferenceNum = map->s_partition_num;
udf_debug("Bitmap file location: block = %d part = %d\n",
- addr.logicalBlockNum, addr.partitionReferenceNum);
+ addr.logicalBlockNum, addr.partitionReferenceNum);
mdata->s_bitmap_fe = udf_iget(sb, &addr);
if (mdata->s_bitmap_fe == NULL) {
if (sb->s_flags & MS_RDONLY)
- udf_warning(sb, __func__, "bitmap inode efe "
- "not found but it's ok since the disc"
- " is mounted read-only");
+ udf_warn(sb, "bitmap inode efe not found but it's ok since the disc is mounted read-only\n");
else {
- udf_error(sb, __func__, "bitmap inode efe not "
- "found and attempted read-write mount");
+ udf_err(sb, "bitmap inode efe not found and attempted read-write mount\n");
goto error_exit;
}
}
@@ -971,9 +950,8 @@
bitmap = vzalloc(size); /* TODO: get rid of vzalloc */
if (bitmap == NULL) {
- udf_error(sb, __func__,
- "Unable to allocate space for bitmap "
- "and %d buffer_head pointers", nr_groups);
+ udf_err(sb, "Unable to allocate space for bitmap and %d buffer_head pointers\n",
+ nr_groups);
return NULL;
}
@@ -1003,10 +981,9 @@
if (p->accessType == cpu_to_le32(PD_ACCESS_TYPE_OVERWRITABLE))
map->s_partition_flags |= UDF_PART_FLAG_OVERWRITABLE;
- udf_debug("Partition (%d type %x) starts at physical %d, "
- "block length %d\n", p_index,
- map->s_partition_type, map->s_partition_root,
- map->s_partition_len);
+ udf_debug("Partition (%d type %x) starts at physical %d, block length %d\n",
+ p_index, map->s_partition_type,
+ map->s_partition_root, map->s_partition_len);
if (strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR02) &&
strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR03))
@@ -1023,12 +1000,12 @@
map->s_uspace.s_table = udf_iget(sb, &loc);
if (!map->s_uspace.s_table) {
udf_debug("cannot load unallocSpaceTable (part %d)\n",
- p_index);
+ p_index);
return 1;
}
map->s_partition_flags |= UDF_PART_FLAG_UNALLOC_TABLE;
udf_debug("unallocSpaceTable (part %d) @ %ld\n",
- p_index, map->s_uspace.s_table->i_ino);
+ p_index, map->s_uspace.s_table->i_ino);
}
if (phd->unallocSpaceBitmap.extLength) {
@@ -1041,8 +1018,8 @@
bitmap->s_extPosition = le32_to_cpu(
phd->unallocSpaceBitmap.extPosition);
map->s_partition_flags |= UDF_PART_FLAG_UNALLOC_BITMAP;
- udf_debug("unallocSpaceBitmap (part %d) @ %d\n", p_index,
- bitmap->s_extPosition);
+ udf_debug("unallocSpaceBitmap (part %d) @ %d\n",
+ p_index, bitmap->s_extPosition);
}
if (phd->partitionIntegrityTable.extLength)
@@ -1058,13 +1035,13 @@
map->s_fspace.s_table = udf_iget(sb, &loc);
if (!map->s_fspace.s_table) {
udf_debug("cannot load freedSpaceTable (part %d)\n",
- p_index);
+ p_index);
return 1;
}
map->s_partition_flags |= UDF_PART_FLAG_FREED_TABLE;
udf_debug("freedSpaceTable (part %d) @ %ld\n",
- p_index, map->s_fspace.s_table->i_ino);
+ p_index, map->s_fspace.s_table->i_ino);
}
if (phd->freedSpaceBitmap.extLength) {
@@ -1077,8 +1054,8 @@
bitmap->s_extPosition = le32_to_cpu(
phd->freedSpaceBitmap.extPosition);
map->s_partition_flags |= UDF_PART_FLAG_FREED_BITMAP;
- udf_debug("freedSpaceBitmap (part %d) @ %d\n", p_index,
- bitmap->s_extPosition);
+ udf_debug("freedSpaceBitmap (part %d) @ %d\n",
+ p_index, bitmap->s_extPosition);
}
return 0;
}
@@ -1118,11 +1095,9 @@
udf_find_vat_block(sb, p_index, type1_index, sbi->s_last_block);
if (!sbi->s_vat_inode &&
sbi->s_last_block != blocks - 1) {
- printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the"
- " last recorded block (%lu), retrying with the last "
- "block of the device (%lu).\n",
- (unsigned long)sbi->s_last_block,
- (unsigned long)blocks - 1);
+ pr_notice("Failed to read VAT inode from the last recorded block (%lu), retrying with the last block of the device (%lu).\n",
+ (unsigned long)sbi->s_last_block,
+ (unsigned long)blocks - 1);
udf_find_vat_block(sb, p_index, type1_index, blocks - 1);
}
if (!sbi->s_vat_inode)
@@ -1220,8 +1195,8 @@
if (map->s_partition_type == UDF_METADATA_MAP25) {
ret = udf_load_metadata_files(sb, i);
if (ret) {
- printk(KERN_ERR "UDF-fs: error loading MetaData "
- "partition map %d\n", i);
+ udf_err(sb, "error loading MetaData partition map %d\n",
+ i);
goto out_bh;
}
} else {
@@ -1234,9 +1209,7 @@
* overwrite blocks instead of relocating them).
*/
sb->s_flags |= MS_RDONLY;
- printk(KERN_NOTICE "UDF-fs: Filesystem marked read-only "
- "because writing to pseudooverwrite partition is "
- "not implemented.\n");
+ pr_notice("Filesystem marked read-only because writing to pseudooverwrite partition is not implemented\n");
}
out_bh:
/* In case loading failed, we handle cleanup in udf_fill_super */
@@ -1344,9 +1317,8 @@
struct metadataPartitionMap *mdm =
(struct metadataPartitionMap *)
&(lvd->partitionMaps[offset]);
- udf_debug("Parsing Logical vol part %d "
- "type %d id=%s\n", i, type,
- UDF_ID_METADATA);
+ udf_debug("Parsing Logical vol part %d type %d id=%s\n",
+ i, type, UDF_ID_METADATA);
map->s_partition_type = UDF_METADATA_MAP25;
map->s_partition_func = udf_get_pblock_meta25;
@@ -1361,25 +1333,24 @@
le32_to_cpu(mdm->allocUnitSize);
mdata->s_align_unit_size =
le16_to_cpu(mdm->alignUnitSize);
- mdata->s_dup_md_flag =
- mdm->flags & 0x01;
+ if (mdm->flags & 0x01)
+ mdata->s_flags |= MF_DUPLICATE_MD;
udf_debug("Metadata Ident suffix=0x%x\n",
- (le16_to_cpu(
- ((__le16 *)
- mdm->partIdent.identSuffix)[0])));
+ le16_to_cpu(*(__le16 *)
+ mdm->partIdent.identSuffix));
udf_debug("Metadata part num=%d\n",
- le16_to_cpu(mdm->partitionNum));
+ le16_to_cpu(mdm->partitionNum));
udf_debug("Metadata part alloc unit size=%d\n",
- le32_to_cpu(mdm->allocUnitSize));
+ le32_to_cpu(mdm->allocUnitSize));
udf_debug("Metadata file loc=%d\n",
- le32_to_cpu(mdm->metadataFileLoc));
+ le32_to_cpu(mdm->metadataFileLoc));
udf_debug("Mirror file loc=%d\n",
- le32_to_cpu(mdm->metadataMirrorFileLoc));
+ le32_to_cpu(mdm->metadataMirrorFileLoc));
udf_debug("Bitmap file loc=%d\n",
- le32_to_cpu(mdm->metadataBitmapFileLoc));
- udf_debug("Duplicate Flag: %d %d\n",
- mdata->s_dup_md_flag, mdm->flags);
+ le32_to_cpu(mdm->metadataBitmapFileLoc));
+ udf_debug("Flags: %d %d\n",
+ mdata->s_flags, mdm->flags);
} else {
udf_debug("Unknown ident: %s\n",
upm2->partIdent.ident);
@@ -1389,16 +1360,15 @@
map->s_partition_num = le16_to_cpu(upm2->partitionNum);
}
udf_debug("Partition (%d:%d) type %d on volume %d\n",
- i, map->s_partition_num, type,
- map->s_volumeseqnum);
+ i, map->s_partition_num, type, map->s_volumeseqnum);
}
if (fileset) {
struct long_ad *la = (struct long_ad *)&(lvd->logicalVolContentsUse[0]);
*fileset = lelb_to_cpu(la->extLocation);
- udf_debug("FileSet found in LogicalVolDesc at block=%d, "
- "partition=%d\n", fileset->logicalBlockNum,
+ udf_debug("FileSet found in LogicalVolDesc at block=%d, partition=%d\n",
+ fileset->logicalBlockNum,
fileset->partitionReferenceNum);
}
if (lvd->integritySeqExt.extLength)
@@ -1478,9 +1448,9 @@
bh = udf_read_tagged(sb, block, block, &ident);
if (!bh) {
- printk(KERN_ERR "udf: Block %Lu of volume descriptor "
- "sequence is corrupted or we could not read "
- "it.\n", (unsigned long long)block);
+ udf_err(sb,
+ "Block %llu of volume descriptor sequence is corrupted or we could not read it\n",
+ (unsigned long long)block);
return 1;
}
@@ -1553,7 +1523,7 @@
* in a suitable order
*/
if (!vds[VDS_POS_PRIMARY_VOL_DESC].block) {
- printk(KERN_ERR "udf: Primary Volume Descriptor not found!\n");
+ udf_err(sb, "Primary Volume Descriptor not found!\n");
return 1;
}
if (udf_load_pvoldesc(sb, vds[VDS_POS_PRIMARY_VOL_DESC].block))
@@ -1740,7 +1710,7 @@
if (!sb_set_blocksize(sb, uopt->blocksize)) {
if (!silent)
- printk(KERN_WARNING "UDF-fs: Bad block size\n");
+ udf_warn(sb, "Bad block size\n");
return 0;
}
sbi->s_last_block = uopt->lastblock;
@@ -1749,12 +1719,11 @@
nsr_off = udf_check_vsd(sb);
if (!nsr_off) {
if (!silent)
- printk(KERN_WARNING "UDF-fs: No VRS found\n");
+ udf_warn(sb, "No VRS found\n");
return 0;
}
if (nsr_off == -1)
- udf_debug("Failed to read byte 32768. Assuming open "
- "disc. Skipping validity check\n");
+ udf_debug("Failed to read byte 32768. Assuming open disc. Skipping validity check\n");
if (!sbi->s_last_block)
sbi->s_last_block = udf_get_last_block(sb);
} else {
@@ -1765,7 +1734,7 @@
sbi->s_anchor = uopt->anchor;
if (!udf_find_anchor(sb, fileset)) {
if (!silent)
- printk(KERN_WARNING "UDF-fs: No anchor found\n");
+ udf_warn(sb, "No anchor found\n");
return 0;
}
return 1;
@@ -1937,8 +1906,7 @@
if (uopt.flags & (1 << UDF_FLAG_UTF8) &&
uopt.flags & (1 << UDF_FLAG_NLS_MAP)) {
- udf_error(sb, "udf_read_super",
- "utf8 cannot be combined with iocharset\n");
+ udf_err(sb, "utf8 cannot be combined with iocharset\n");
goto error_out;
}
#ifdef CONFIG_UDF_NLS
@@ -1987,15 +1955,14 @@
ret = udf_load_vrs(sb, &uopt, silent, &fileset);
if (!ret && uopt.blocksize != UDF_DEFAULT_BLOCKSIZE) {
if (!silent)
- printk(KERN_NOTICE
- "UDF-fs: Rescanning with blocksize "
- "%d\n", UDF_DEFAULT_BLOCKSIZE);
+ pr_notice("Rescanning with blocksize %d\n",
+ UDF_DEFAULT_BLOCKSIZE);
uopt.blocksize = UDF_DEFAULT_BLOCKSIZE;
ret = udf_load_vrs(sb, &uopt, silent, &fileset);
}
}
if (!ret) {
- printk(KERN_WARNING "UDF-fs: No partition found (1)\n");
+ udf_warn(sb, "No partition found (1)\n");
goto error_out;
}
@@ -2010,10 +1977,9 @@
le16_to_cpu(lvidiu->maxUDFWriteRev); */
if (minUDFReadRev > UDF_MAX_READ_VERSION) {
- printk(KERN_ERR "UDF-fs: minUDFReadRev=%x "
- "(max is %x)\n",
- le16_to_cpu(lvidiu->minUDFReadRev),
- UDF_MAX_READ_VERSION);
+ udf_err(sb, "minUDFReadRev=%x (max is %x)\n",
+ le16_to_cpu(lvidiu->minUDFReadRev),
+ UDF_MAX_READ_VERSION);
goto error_out;
} else if (minUDFWriteRev > UDF_MAX_WRITE_VERSION)
sb->s_flags |= MS_RDONLY;
@@ -2027,28 +1993,27 @@
}
if (!sbi->s_partitions) {
- printk(KERN_WARNING "UDF-fs: No partition found (2)\n");
+ udf_warn(sb, "No partition found (2)\n");
goto error_out;
}
if (sbi->s_partmaps[sbi->s_partition].s_partition_flags &
UDF_PART_FLAG_READ_ONLY) {
- printk(KERN_NOTICE "UDF-fs: Partition marked readonly; "
- "forcing readonly mount\n");
+ pr_notice("Partition marked readonly; forcing readonly mount\n");
sb->s_flags |= MS_RDONLY;
}
if (udf_find_fileset(sb, &fileset, &rootdir)) {
- printk(KERN_WARNING "UDF-fs: No fileset found\n");
+ udf_warn(sb, "No fileset found\n");
goto error_out;
}
if (!silent) {
struct timestamp ts;
udf_time_to_disk_stamp(&ts, sbi->s_record_time);
- udf_info("UDF: Mounting volume '%s', "
- "timestamp %04u/%02u/%02u %02u:%02u (%x)\n",
- sbi->s_volume_ident, le16_to_cpu(ts.year), ts.month, ts.day,
+ udf_info("Mounting volume '%s', timestamp %04u/%02u/%02u %02u:%02u (%x)\n",
+ sbi->s_volume_ident,
+ le16_to_cpu(ts.year), ts.month, ts.day,
ts.hour, ts.minute, le16_to_cpu(ts.typeAndTimezone));
}
if (!(sb->s_flags & MS_RDONLY))
@@ -2059,8 +2024,7 @@
/* perhaps it's not extensible enough, but for now ... */
inode = udf_iget(sb, &rootdir);
if (!inode) {
- printk(KERN_ERR "UDF-fs: Error in udf_iget, block=%d, "
- "partition=%d\n",
+ udf_err(sb, "Error in udf_iget, block=%d, partition=%d\n",
rootdir.logicalBlockNum, rootdir.partitionReferenceNum);
goto error_out;
}
@@ -2068,7 +2032,7 @@
/* Allocate a dentry for the root inode */
sb->s_root = d_alloc_root(inode);
if (!sb->s_root) {
- printk(KERN_ERR "UDF-fs: Couldn't allocate root dentry\n");
+ udf_err(sb, "Couldn't allocate root dentry\n");
iput(inode);
goto error_out;
}
@@ -2096,32 +2060,40 @@
return -EINVAL;
}
-static void udf_error(struct super_block *sb, const char *function,
- const char *fmt, ...)
+void _udf_err(struct super_block *sb, const char *function,
+ const char *fmt, ...)
{
+ struct va_format vaf;
va_list args;
- if (!(sb->s_flags & MS_RDONLY)) {
- /* mark sb error */
+ /* mark sb error */
+ if (!(sb->s_flags & MS_RDONLY))
sb->s_dirt = 1;
- }
+
va_start(args, fmt);
- vsnprintf(error_buf, sizeof(error_buf), fmt, args);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ pr_err("error (device %s): %s: %pV", sb->s_id, function, &vaf);
+
va_end(args);
- printk(KERN_CRIT "UDF-fs error (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
}
-void udf_warning(struct super_block *sb, const char *function,
- const char *fmt, ...)
+void _udf_warn(struct super_block *sb, const char *function,
+ const char *fmt, ...)
{
+ struct va_format vaf;
va_list args;
va_start(args, fmt);
- vsnprintf(error_buf, sizeof(error_buf), fmt, args);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ pr_warn("warning (device %s): %s: %pV", sb->s_id, function, &vaf);
+
va_end(args);
- printk(KERN_WARNING "UDF-fs warning (device %s): %s: %s\n",
- sb->s_id, function, error_buf);
}
static void udf_put_super(struct super_block *sb)
@@ -2213,11 +2185,11 @@
bh = udf_read_ptagged(sb, &loc, 0, &ident);
if (!bh) {
- printk(KERN_ERR "udf: udf_count_free failed\n");
+ udf_err(sb, "udf_count_free failed\n");
goto out;
} else if (ident != TAG_IDENT_SBD) {
brelse(bh);
- printk(KERN_ERR "udf: udf_count_free failed\n");
+ udf_err(sb, "udf_count_free failed\n");
goto out;
}
diff --git a/fs/udf/truncate.c b/fs/udf/truncate.c
index 8424308..4b98fee 100644
--- a/fs/udf/truncate.c
+++ b/fs/udf/truncate.c
@@ -95,23 +95,21 @@
lbcount += elen;
if (lbcount > inode->i_size) {
if (lbcount - inode->i_size >= inode->i_sb->s_blocksize)
- printk(KERN_WARNING
- "udf_truncate_tail_extent(): Too long "
- "extent after EOF in inode %u: i_size: "
- "%Ld lbcount: %Ld extent %u+%u\n",
- (unsigned)inode->i_ino,
- (long long)inode->i_size,
- (long long)lbcount,
- (unsigned)eloc.logicalBlockNum,
- (unsigned)elen);
+ udf_warn(inode->i_sb,
+ "Too long extent after EOF in inode %u: i_size: %lld lbcount: %lld extent %u+%u\n",
+ (unsigned)inode->i_ino,
+ (long long)inode->i_size,
+ (long long)lbcount,
+ (unsigned)eloc.logicalBlockNum,
+ (unsigned)elen);
nelen = elen - (lbcount - inode->i_size);
epos.offset -= adsize;
extent_trunc(inode, &epos, &eloc, etype, elen, nelen);
epos.offset += adsize;
if (udf_next_aext(inode, &epos, &eloc, &elen, 1) != -1)
- printk(KERN_ERR "udf_truncate_tail_extent(): "
- "Extent after EOF in inode %u.\n",
- (unsigned)inode->i_ino);
+ udf_err(inode->i_sb,
+ "Extent after EOF in inode %u\n",
+ (unsigned)inode->i_ino);
break;
}
}
diff --git a/fs/udf/udf_sb.h b/fs/udf/udf_sb.h
index 4858c19..5142a82 100644
--- a/fs/udf/udf_sb.h
+++ b/fs/udf/udf_sb.h
@@ -54,13 +54,16 @@
#pragma pack(1) /* XXX(hch): Why? This file just defines in-core structures */
+#define MF_DUPLICATE_MD 0x01
+#define MF_MIRROR_FE_LOADED 0x02
+
struct udf_meta_data {
__u32 s_meta_file_loc;
__u32 s_mirror_file_loc;
__u32 s_bitmap_file_loc;
__u32 s_alloc_unit_size;
__u16 s_align_unit_size;
- __u8 s_dup_md_flag;
+ int s_flags;
struct inode *s_metadata_fe;
struct inode *s_mirror_fe;
struct inode *s_bitmap_fe;
diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h
index dc8a8dc..f34e6fc 100644
--- a/fs/udf/udfdecl.h
+++ b/fs/udf/udfdecl.h
@@ -1,6 +1,8 @@
#ifndef __UDF_DECL_H
#define __UDF_DECL_H
+#define pr_fmt(fmt) "UDF-fs: " fmt
+
#include "ecma_167.h"
#include "osta_udf.h"
@@ -16,23 +18,30 @@
#define UDF_PREALLOCATE
#define UDF_DEFAULT_PREALLOC_BLOCKS 8
+extern __printf(3, 4) void _udf_err(struct super_block *sb,
+ const char *function, const char *fmt, ...);
+#define udf_err(sb, fmt, ...) \
+ _udf_err(sb, __func__, fmt, ##__VA_ARGS__)
+
+extern __printf(3, 4) void _udf_warn(struct super_block *sb,
+ const char *function, const char *fmt, ...);
+#define udf_warn(sb, fmt, ...) \
+ _udf_warn(sb, __func__, fmt, ##__VA_ARGS__)
+
+#define udf_info(fmt, ...) \
+ pr_info("INFO " fmt, ##__VA_ARGS__)
+
#undef UDFFS_DEBUG
#ifdef UDFFS_DEBUG
-#define udf_debug(f, a...) \
-do { \
- printk(KERN_DEBUG "UDF-fs DEBUG %s:%d:%s: ", \
- __FILE__, __LINE__, __func__); \
- printk(f, ##a); \
-} while (0)
+#define udf_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt("%s:%d:%s: " fmt), \
+ __FILE__, __LINE__, __func__, ##__VA_ARGS__)
#else
-#define udf_debug(f, a...) /**/
+#define udf_debug(fmt, ...) \
+ no_printk(fmt, ##__VA_ARGS__)
#endif
-#define udf_info(f, a...) \
- printk(KERN_INFO "UDF-fs INFO " f, ##a);
-
-
#define udf_fixed_to_variable(x) ( ( ( (x) >> 5 ) * 39 ) + ( (x) & 0x0000001F ) )
#define udf_variable_to_fixed(x) ( ( ( (x) / 39 ) << 5 ) + ( (x) % 39 ) )
@@ -112,8 +121,6 @@
/* super.c */
-extern __printf(3, 4) void udf_warning(struct super_block *, const char *,
- const char *, ...);
static inline void udf_updated_lvid(struct super_block *sb)
{
struct buffer_head *bh = UDF_SB(sb)->s_lvid_bh;
@@ -126,6 +133,8 @@
UDF_SB(sb)->s_lvid_dirty = 1;
}
extern u64 lvid_get_unique_id(struct super_block *sb);
+struct inode *udf_find_metadata_inode_efe(struct super_block *sb,
+ u32 meta_file_loc, u32 partition_num);
/* namei.c */
extern int udf_write_fi(struct inode *inode, struct fileIdentDesc *,
diff --git a/fs/udf/udftime.c b/fs/udf/udftime.c
index b8c828c..1f11483 100644
--- a/fs/udf/udftime.c
+++ b/fs/udf/udftime.c
@@ -34,9 +34,10 @@
* http://www.boulder.nist.gov/timefreq/pubs/bulletin/leapsecond.htm
*/
+#include "udfdecl.h"
+
#include <linux/types.h>
#include <linux/kernel.h>
-#include "udfdecl.h"
#define EPOCH_YEAR 1970
diff --git a/fs/udf/unicode.c b/fs/udf/unicode.c
index d03a90b..44b815e 100644
--- a/fs/udf/unicode.c
+++ b/fs/udf/unicode.c
@@ -114,7 +114,7 @@
cmp_id = ocu_i->u_cmpID;
if (cmp_id != 8 && cmp_id != 16) {
memset(utf_o, 0, sizeof(struct ustr));
- printk(KERN_ERR "udf: unknown compression code (%d) stri=%s\n",
+ pr_err("unknown compression code (%d) stri=%s\n",
cmp_id, ocu_i->u_name);
return 0;
}
@@ -242,7 +242,7 @@
if (utf_cnt) {
error_out:
ocu[++u_len] = '?';
- printk(KERN_DEBUG "udf: bad UTF-8 character\n");
+ printk(KERN_DEBUG pr_fmt("bad UTF-8 character\n"));
}
ocu[length - 1] = (uint8_t)u_len + 1;
@@ -267,7 +267,7 @@
cmp_id = ocu_i->u_cmpID;
if (cmp_id != 8 && cmp_id != 16) {
memset(utf_o, 0, sizeof(struct ustr));
- printk(KERN_ERR "udf: unknown compression code (%d) stri=%s\n",
+ pr_err("unknown compression code (%d) stri=%s\n",
cmp_id, ocu_i->u_name);
return 0;
}
diff --git a/fs/ufs/ialloc.c b/fs/ufs/ialloc.c
index 2eabf04..78a4c70 100644
--- a/fs/ufs/ialloc.c
+++ b/fs/ufs/ialloc.c
@@ -341,7 +341,7 @@
fail_remove_inode:
unlock_super(sb);
- inode->i_nlink = 0;
+ clear_nlink(inode);
iput(inode);
UFSD("EXIT (FAILED): err %d\n", err);
return ERR_PTR(err);
diff --git a/fs/ufs/inode.c b/fs/ufs/inode.c
index b4d791a..879b134 100644
--- a/fs/ufs/inode.c
+++ b/fs/ufs/inode.c
@@ -589,7 +589,7 @@
* Copy data to the in-core inode.
*/
inode->i_mode = mode = fs16_to_cpu(sb, ufs_inode->ui_mode);
- inode->i_nlink = fs16_to_cpu(sb, ufs_inode->ui_nlink);
+ set_nlink(inode, fs16_to_cpu(sb, ufs_inode->ui_nlink));
if (inode->i_nlink == 0) {
ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino);
return -1;
@@ -637,7 +637,7 @@
* Copy data to the in-core inode.
*/
inode->i_mode = mode = fs16_to_cpu(sb, ufs2_inode->ui_mode);
- inode->i_nlink = fs16_to_cpu(sb, ufs2_inode->ui_nlink);
+ set_nlink(inode, fs16_to_cpu(sb, ufs2_inode->ui_nlink));
if (inode->i_nlink == 0) {
ufs_error (sb, "ufs_read_inode", "inode %lu has zero nlink\n", inode->i_ino);
return -1;
diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c
index 9ba2a07..23ce927 100644
--- a/fs/xfs/xfs_iops.c
+++ b/fs/xfs/xfs_iops.c
@@ -1153,7 +1153,7 @@
hlist_add_fake(&inode->i_hash);
inode->i_mode = ip->i_d.di_mode;
- inode->i_nlink = ip->i_d.di_nlink;
+ set_nlink(inode, ip->i_d.di_nlink);
inode->i_uid = ip->i_d.di_uid;
inode->i_gid = ip->i_d.di_gid;
diff --git a/include/linux/aio.h b/include/linux/aio.h
index 2dcb72b..2314ad8 100644
--- a/include/linux/aio.h
+++ b/include/linux/aio.h
@@ -117,6 +117,7 @@
struct list_head ki_list; /* the aio core uses this
* for cancellation */
+ struct list_head ki_batch; /* batch allocation */
/*
* If the aio_resfd field of the userspace iocb is not zero,
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index da7e4bc..1b7f9d5 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -516,7 +516,7 @@
struct list_head sibling;
/* used when use_id == true */
struct idr idr;
- spinlock_t id_lock;
+ rwlock_t id_lock;
/* should be defined only by modular subsystems */
struct module *module;
diff --git a/include/linux/clksrc-dbx500-prcmu.h b/include/linux/clksrc-dbx500-prcmu.h
new file mode 100644
index 0000000..4fb8119
--- /dev/null
+++ b/include/linux/clksrc-dbx500-prcmu.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com>
+ *
+ */
+#ifndef __CLKSRC_DBX500_PRCMU_H
+#define __CLKSRC_DBX500_PRCMU_H
+
+#include <linux/init.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_CLKSRC_DBX500_PRCMU
+void __init clksrc_dbx500_prcmu_init(void __iomem *base);
+#else
+static inline void __init clksrc_dbx500_prcmu_init(void __iomem *base) {}
+#endif
+
+#endif
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 62157c0..4df9261 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -165,6 +165,7 @@
unsigned int, const char *, const struct qstr *);
int (*d_delete)(const struct dentry *);
void (*d_release)(struct dentry *);
+ void (*d_prune)(struct dentry *);
void (*d_iput)(struct dentry *, struct inode *);
char *(*d_dname)(struct dentry *, char *, int);
struct vfsmount *(*d_automount)(struct path *);
@@ -184,8 +185,9 @@
#define DCACHE_OP_COMPARE 0x0002
#define DCACHE_OP_REVALIDATE 0x0004
#define DCACHE_OP_DELETE 0x0008
+#define DCACHE_OP_PRUNE 0x0010
-#define DCACHE_DISCONNECTED 0x0010
+#define DCACHE_DISCONNECTED 0x0020
/* This dentry is possibly not currently connected to the dcache tree, in
* which case its parent will either be itself, or will have this flag as
* well. nfsd will not use a dentry with this bit set, but will first
@@ -196,8 +198,8 @@
* dentry into place and return that dentry rather than the passed one,
* typically using d_splice_alias. */
-#define DCACHE_REFERENCED 0x0020 /* Recently used, don't discard. */
-#define DCACHE_RCUACCESS 0x0040 /* Entry has ever been RCU-visible */
+#define DCACHE_REFERENCED 0x0040 /* Recently used, don't discard. */
+#define DCACHE_RCUACCESS 0x0080 /* Entry has ever been RCU-visible */
#define DCACHE_CANT_MOUNT 0x0100
#define DCACHE_GENOCIDE 0x0200
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 99e3e50..98f34b8 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -10,6 +10,7 @@
#include <linux/bio.h>
#include <linux/blkdev.h>
+#include <linux/ratelimit.h>
struct dm_dev;
struct dm_target;
@@ -127,10 +128,6 @@
* Information about a target type
*/
-/*
- * Target features
- */
-
struct target_type {
uint64_t features;
const char *name;
@@ -159,6 +156,30 @@
struct list_head list;
};
+/*
+ * Target features
+ */
+
+/*
+ * Any table that contains an instance of this target must have only one.
+ */
+#define DM_TARGET_SINGLETON 0x00000001
+#define dm_target_needs_singleton(type) ((type)->features & DM_TARGET_SINGLETON)
+
+/*
+ * Indicates that a target does not support read-only devices.
+ */
+#define DM_TARGET_ALWAYS_WRITEABLE 0x00000002
+#define dm_target_always_writeable(type) \
+ ((type)->features & DM_TARGET_ALWAYS_WRITEABLE)
+
+/*
+ * Any device that contains a table with an instance of this target may never
+ * have tables containing any different target type.
+ */
+#define DM_TARGET_IMMUTABLE 0x00000004
+#define dm_target_is_immutable(type) ((type)->features & DM_TARGET_IMMUTABLE)
+
struct dm_target {
struct dm_table *table;
struct target_type *type;
@@ -375,6 +396,14 @@
*---------------------------------------------------------------*/
#define DM_NAME "device-mapper"
+#ifdef CONFIG_PRINTK
+extern struct ratelimit_state dm_ratelimit_state;
+
+#define dm_ratelimit() __ratelimit(&dm_ratelimit_state)
+#else
+#define dm_ratelimit() 0
+#endif
+
#define DMCRIT(f, arg...) \
printk(KERN_CRIT DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
@@ -382,7 +411,7 @@
printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
#define DMERR_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_ERR DM_NAME ": " DM_MSG_PREFIX ": " \
f "\n", ## arg); \
} while (0)
@@ -391,7 +420,7 @@
printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
#define DMWARN_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_WARNING DM_NAME ": " DM_MSG_PREFIX ": " \
f "\n", ## arg); \
} while (0)
@@ -400,7 +429,7 @@
printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f "\n", ## arg)
#define DMINFO_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_INFO DM_NAME ": " DM_MSG_PREFIX ": " f \
"\n", ## arg); \
} while (0)
@@ -410,7 +439,7 @@
printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX " DEBUG: " f "\n", ## arg)
# define DMDEBUG_LIMIT(f, arg...) \
do { \
- if (printk_ratelimit()) \
+ if (dm_ratelimit()) \
printk(KERN_DEBUG DM_NAME ": " DM_MSG_PREFIX ": " f \
"\n", ## arg); \
} while (0)
diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h
index 0cb8eff..75fd557 100644
--- a/include/linux/dm-ioctl.h
+++ b/include/linux/dm-ioctl.h
@@ -267,9 +267,9 @@
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 21
+#define DM_VERSION_MINOR 22
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2011-07-06)"
+#define DM_VERSION_EXTRA "-ioctl (2011-10-19)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
diff --git a/include/linux/dm-kcopyd.h b/include/linux/dm-kcopyd.h
index 5e54458..47d9d37 100644
--- a/include/linux/dm-kcopyd.h
+++ b/include/linux/dm-kcopyd.h
@@ -57,5 +57,9 @@
dm_kcopyd_notify_fn fn, void *context);
void dm_kcopyd_do_callback(void *job, int read_err, unsigned long write_err);
+int dm_kcopyd_zero(struct dm_kcopyd_client *kc,
+ unsigned num_dests, struct dm_io_region *dests,
+ unsigned flags, dm_kcopyd_notify_fn fn, void *context);
+
#endif /* __KERNEL__ */
#endif /* _LINUX_DM_KCOPYD_H */
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
index eeace7d..0678c2a 100644
--- a/include/linux/dm-log-userspace.h
+++ b/include/linux/dm-log-userspace.h
@@ -52,15 +52,20 @@
* Payload-to-userspace:
* A single string containing all the argv arguments separated by ' 's
* Payload-to-kernel:
- * None. ('data_size' in the dm_ulog_request struct should be 0.)
+ * A NUL-terminated string that is the name of the device that is used
+ * as the backing store for the log data. 'dm_get_device' will be called
+ * on this device. ('dm_put_device' will be called on this device
+ * automatically after calling DM_ULOG_DTR.) If there is no device needed
+ * for log data, 'data_size' in the dm_ulog_request struct should be 0.
*
* The UUID contained in the dm_ulog_request structure is the reference that
* will be used by all request types to a specific log. The constructor must
- * record this assotiation with instance created.
+ * record this association with the instance created.
*
* When the request has been processed, user-space must return the
- * dm_ulog_request to the kernel - setting the 'error' field and
- * 'data_size' appropriately.
+ * dm_ulog_request to the kernel - setting the 'error' field, filling the
+ * data field with the log device if necessary, and setting 'data_size'
+ * appropriately.
*/
#define DM_ULOG_CTR 1
@@ -377,8 +382,11 @@
* dm_ulog_request or a change in the way requests are
* issued/handled. Changes are outlined here:
* version 1: Initial implementation
+ * version 2: DM_ULOG_CTR allowed to return a string containing a
+ * device name that is to be registered with DM via
+ * 'dm_get_device'.
*/
-#define DM_ULOG_REQUEST_VERSION 1
+#define DM_ULOG_REQUEST_VERSION 2
struct dm_ulog_request {
/*
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 347fdc3..be86ae1 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -1,6 +1,7 @@
#ifndef _LINUX_DMA_MAPPING_H
#define _LINUX_DMA_MAPPING_H
+#include <linux/string.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/dma-attrs.h>
@@ -117,6 +118,15 @@
return -EIO;
}
+static inline void *dma_zalloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag)
+{
+ void *ret = dma_alloc_coherent(dev, size, dma_handle, flag);
+ if (ret)
+ memset(ret, 0, size);
+ return ret;
+}
+
#ifdef CONFIG_HAS_DMA
static inline int dma_get_cache_alignment(void)
{
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 4a73257..055b248 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -42,4 +42,354 @@
return;
}
+#define EDAC_MC_LABEL_LEN 31
+#define MC_PROC_NAME_MAX_LEN 7
+
+/* memory devices */
+enum dev_type {
+ DEV_UNKNOWN = 0,
+ DEV_X1,
+ DEV_X2,
+ DEV_X4,
+ DEV_X8,
+ DEV_X16,
+ DEV_X32, /* Do these parts exist? */
+ DEV_X64 /* Do these parts exist? */
+};
+
+#define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN)
+#define DEV_FLAG_X1 BIT(DEV_X1)
+#define DEV_FLAG_X2 BIT(DEV_X2)
+#define DEV_FLAG_X4 BIT(DEV_X4)
+#define DEV_FLAG_X8 BIT(DEV_X8)
+#define DEV_FLAG_X16 BIT(DEV_X16)
+#define DEV_FLAG_X32 BIT(DEV_X32)
+#define DEV_FLAG_X64 BIT(DEV_X64)
+
+/* memory types */
+enum mem_type {
+ MEM_EMPTY = 0, /* Empty csrow */
+ MEM_RESERVED, /* Reserved csrow type */
+ MEM_UNKNOWN, /* Unknown csrow type */
+ MEM_FPM, /* Fast page mode */
+ MEM_EDO, /* Extended data out */
+ MEM_BEDO, /* Burst Extended data out */
+ MEM_SDR, /* Single data rate SDRAM */
+ MEM_RDR, /* Registered single data rate SDRAM */
+ MEM_DDR, /* Double data rate SDRAM */
+ MEM_RDDR, /* Registered Double data rate SDRAM */
+ MEM_RMBS, /* Rambus DRAM */
+ MEM_DDR2, /* DDR2 RAM */
+ MEM_FB_DDR2, /* fully buffered DDR2 */
+ MEM_RDDR2, /* Registered DDR2 RAM */
+ MEM_XDR, /* Rambus XDR */
+ MEM_DDR3, /* DDR3 RAM */
+ MEM_RDDR3, /* Registered DDR3 RAM */
+};
+
+#define MEM_FLAG_EMPTY BIT(MEM_EMPTY)
+#define MEM_FLAG_RESERVED BIT(MEM_RESERVED)
+#define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN)
+#define MEM_FLAG_FPM BIT(MEM_FPM)
+#define MEM_FLAG_EDO BIT(MEM_EDO)
+#define MEM_FLAG_BEDO BIT(MEM_BEDO)
+#define MEM_FLAG_SDR BIT(MEM_SDR)
+#define MEM_FLAG_RDR BIT(MEM_RDR)
+#define MEM_FLAG_DDR BIT(MEM_DDR)
+#define MEM_FLAG_RDDR BIT(MEM_RDDR)
+#define MEM_FLAG_RMBS BIT(MEM_RMBS)
+#define MEM_FLAG_DDR2 BIT(MEM_DDR2)
+#define MEM_FLAG_FB_DDR2 BIT(MEM_FB_DDR2)
+#define MEM_FLAG_RDDR2 BIT(MEM_RDDR2)
+#define MEM_FLAG_XDR BIT(MEM_XDR)
+#define MEM_FLAG_DDR3 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3 BIT(MEM_RDDR3)
+
+/* chipset Error Detection and Correction capabilities and mode */
+enum edac_type {
+ EDAC_UNKNOWN = 0, /* Unknown if ECC is available */
+ EDAC_NONE, /* Doesn't support ECC */
+ EDAC_RESERVED, /* Reserved ECC type */
+ EDAC_PARITY, /* Detects parity errors */
+ EDAC_EC, /* Error Checking - no correction */
+ EDAC_SECDED, /* Single bit error correction, Double detection */
+ EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */
+ EDAC_S4ECD4ED, /* Chipkill x4 devices */
+ EDAC_S8ECD8ED, /* Chipkill x8 devices */
+ EDAC_S16ECD16ED, /* Chipkill x16 devices */
+};
+
+#define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN)
+#define EDAC_FLAG_NONE BIT(EDAC_NONE)
+#define EDAC_FLAG_PARITY BIT(EDAC_PARITY)
+#define EDAC_FLAG_EC BIT(EDAC_EC)
+#define EDAC_FLAG_SECDED BIT(EDAC_SECDED)
+#define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED)
+#define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED)
+#define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED)
+#define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED)
+
+/* scrubbing capabilities */
+enum scrub_type {
+ SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */
+ SCRUB_NONE, /* No scrubber */
+ SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */
+ SCRUB_SW_SRC, /* Software scrub only errors */
+ SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */
+ SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */
+ SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */
+ SCRUB_HW_SRC, /* Hardware scrub only errors */
+ SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */
+ SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */
+};
+
+#define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG)
+#define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC)
+#define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC)
+#define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE)
+#define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG)
+#define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC)
+#define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC)
+#define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE)
+
+/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
+
+/* EDAC internal operation states */
+#define OP_ALLOC 0x100
+#define OP_RUNNING_POLL 0x201
+#define OP_RUNNING_INTERRUPT 0x202
+#define OP_RUNNING_POLL_INTR 0x203
+#define OP_OFFLINE 0x300
+
+/*
+ * There are several things to be aware of that aren't at all obvious:
+ *
+ *
+ * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
+ *
+ * These are some of the many terms that are thrown about that don't always
+ * mean what people think they mean (Inconceivable!). In the interest of
+ * creating a common ground for discussion, terms and their definitions
+ * will be established.
+ *
+ * Memory devices: The individual chip on a memory stick. These devices
+ * commonly output 4 and 8 bits each. Grouping several
+ * of these in parallel provides 64 bits which is common
+ * for a memory stick.
+ *
+ * Memory Stick: A printed circuit board that aggregates multiple
+ * memory devices in parallel. This is the atomic
+ * memory component that is purchaseable by Joe consumer
+ * and loaded into a memory socket.
+ *
+ * Socket: A physical connector on the motherboard that accepts
+ * a single memory stick.
+ *
+ * Channel: Set of memory devices on a memory stick that must be
+ * grouped in parallel with one or more additional
+ * channels from other memory sticks. This parallel
+ * grouping of the output from multiple channels are
+ * necessary for the smallest granularity of memory access.
+ * Some memory controllers are capable of single channel -
+ * which means that memory sticks can be loaded
+ * individually. Other memory controllers are only
+ * capable of dual channel - which means that memory
+ * sticks must be loaded as pairs (see "socket set").
+ *
+ * Chip-select row: All of the memory devices that are selected together.
+ * for a single, minimum grain of memory access.
+ * This selects all of the parallel memory devices across
+ * all of the parallel channels. Common chip-select rows
+ * for single channel are 64 bits, for dual channel 128
+ * bits.
+ *
+ * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
+ * Motherboards commonly drive two chip-select pins to
+ * a memory stick. A single-ranked stick, will occupy
+ * only one of those rows. The other will be unused.
+ *
+ * Double-Ranked stick: A double-ranked stick has two chip-select rows which
+ * access different sets of memory devices. The two
+ * rows cannot be accessed concurrently.
+ *
+ * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick.
+ * A double-sided stick has two chip-select rows which
+ * access different sets of memory devices. The two
+ * rows cannot be accessed concurrently. "Double-sided"
+ * is irrespective of the memory devices being mounted
+ * on both sides of the memory stick.
+ *
+ * Socket set: All of the memory sticks that are required for
+ * a single memory access or all of the memory sticks
+ * spanned by a chip-select row. A single socket set
+ * has two chip-select rows and if double-sided sticks
+ * are used these will occupy those chip-select rows.
+ *
+ * Bank: This term is avoided because it is unclear when
+ * needing to distinguish between chip-select rows and
+ * socket sets.
+ *
+ * Controller pages:
+ *
+ * Physical pages:
+ *
+ * Virtual pages:
+ *
+ *
+ * STRUCTURE ORGANIZATION AND CHOICES
+ *
+ *
+ *
+ * PS - I enjoyed writing all that about as much as you enjoyed reading it.
+ */
+
+struct channel_info {
+ int chan_idx; /* channel index */
+ u32 ce_count; /* Correctable Errors for this CHANNEL */
+ char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */
+ struct csrow_info *csrow; /* the parent */
+};
+
+struct csrow_info {
+ unsigned long first_page; /* first page number in dimm */
+ unsigned long last_page; /* last page number in dimm */
+ unsigned long page_mask; /* used for interleaving -
+ * 0UL for non intlv
+ */
+ u32 nr_pages; /* number of pages in csrow */
+ u32 grain; /* granularity of reported error in bytes */
+ int csrow_idx; /* the chip-select row */
+ enum dev_type dtype; /* memory device type */
+ u32 ue_count; /* Uncorrectable Errors for this csrow */
+ u32 ce_count; /* Correctable Errors for this csrow */
+ enum mem_type mtype; /* memory csrow type */
+ enum edac_type edac_mode; /* EDAC mode for this csrow */
+ struct mem_ctl_info *mci; /* the parent */
+
+ struct kobject kobj; /* sysfs kobject for this csrow */
+
+ /* channel information for this csrow */
+ u32 nr_channels;
+ struct channel_info *channels;
+};
+
+struct mcidev_sysfs_group {
+ const char *name; /* group name */
+ const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+ struct list_head list; /* list for all instances within a mc */
+
+ struct kobject kobj; /* kobj for the group */
+
+ const struct mcidev_sysfs_group *grp; /* group description table */
+ struct mem_ctl_info *mci; /* the parent */
+};
+
+/* mcidev_sysfs_attribute structure
+ * used for driver sysfs attributes and in mem_ctl_info
+ * sysfs top level entries
+ */
+struct mcidev_sysfs_attribute {
+ /* It should use either attr or grp */
+ struct attribute attr;
+ const struct mcidev_sysfs_group *grp; /* Points to a group of attributes */
+
+ /* Ops for show/store values at the attribute - not used on group */
+ ssize_t (*show)(struct mem_ctl_info *,char *);
+ ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
+};
+
+/* MEMORY controller information structure
+ */
+struct mem_ctl_info {
+ struct list_head link; /* for global list of mem_ctl_info structs */
+
+ struct module *owner; /* Module owner of this control struct */
+
+ unsigned long mtype_cap; /* memory types supported by mc */
+ unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */
+ unsigned long edac_cap; /* configuration capabilities - this is
+ * closely related to edac_ctl_cap. The
+ * difference is that the controller may be
+ * capable of s4ecd4ed which would be listed
+ * in edac_ctl_cap, but if channels aren't
+ * capable of s4ecd4ed then the edac_cap would
+ * not have that capability.
+ */
+ unsigned long scrub_cap; /* chipset scrub capabilities */
+ enum scrub_type scrub_mode; /* current scrub mode */
+
+ /* Translates sdram memory scrub rate given in bytes/sec to the
+ internal representation and configures whatever else needs
+ to be configured.
+ */
+ int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
+
+ /* Get the current sdram memory scrub rate from the internal
+ representation and converts it to the closest matching
+ bandwidth in bytes/sec.
+ */
+ int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
+
+
+ /* pointer to edac checking routine */
+ void (*edac_check) (struct mem_ctl_info * mci);
+
+ /*
+ * Remaps memory pages: controller pages to physical pages.
+ * For most MC's, this will be NULL.
+ */
+ /* FIXME - why not send the phys page to begin with? */
+ unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
+ unsigned long page);
+ int mc_idx;
+ int nr_csrows;
+ struct csrow_info *csrows;
+ /*
+ * FIXME - what about controllers on other busses? - IDs must be
+ * unique. dev pointer should be sufficiently unique, but
+ * BUS:SLOT.FUNC numbers may not be unique.
+ */
+ struct device *dev;
+ const char *mod_name;
+ const char *mod_ver;
+ const char *ctl_name;
+ const char *dev_name;
+ char proc_name[MC_PROC_NAME_MAX_LEN + 1];
+ void *pvt_info;
+ u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */
+ u32 ce_noinfo_count; /* Correctable Errors w/o info */
+ u32 ue_count; /* Total Uncorrectable Errors for this MC */
+ u32 ce_count; /* Total Correctable Errors for this MC */
+ unsigned long start_time; /* mci load start time (in jiffies) */
+
+ struct completion complete;
+
+ /* edac sysfs device control */
+ struct kobject edac_mci_kobj;
+
+ /* list for all grp instances within a mc */
+ struct list_head grp_kobj_list;
+
+ /* Additional top controller level attributes, but specified
+ * by the low level driver.
+ *
+ * Set by the low level driver to provide attributes at the
+ * controller level, same level as 'ue_count' and 'ce_count' above.
+ * An array of structures, NULL terminated
+ *
+ * If attributes are desired, then set to array of attributes
+ * If no attributes are desired, leave NULL
+ */
+ const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
+
+ /* work struct for this MC */
+ struct delayed_work work;
+
+ /* the internal state of this controller instance */
+ int op_state;
+};
+
#endif
diff --git a/include/linux/edac_mce.h b/include/linux/edac_mce.h
deleted file mode 100644
index f974fc0..0000000
--- a/include/linux/edac_mce.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* Provides edac interface to mcelog events
- *
- * This file may be distributed under the terms of the
- * GNU General Public License version 2.
- *
- * Copyright (c) 2009 by:
- * Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * Red Hat Inc. http://www.redhat.com
- */
-
-#if defined(CONFIG_EDAC_MCE) || \
- (defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE))
-
-#include <asm/mce.h>
-#include <linux/list.h>
-
-struct edac_mce {
- struct list_head list;
-
- void *priv;
- int (*check_error)(void *priv, struct mce *mce);
-};
-
-int edac_mce_register(struct edac_mce *edac_mce);
-void edac_mce_unregister(struct edac_mce *edac_mce);
-int edac_mce_parse(struct mce *mce);
-
-#else
-#define edac_mce_parse(mce) (0)
-#endif
diff --git a/include/linux/ext2_fs.h b/include/linux/ext2_fs.h
index 53792bf..ce1b719 100644
--- a/include/linux/ext2_fs.h
+++ b/include/linux/ext2_fs.h
@@ -197,8 +197,8 @@
/* Flags that should be inherited by new inodes from their parent. */
#define EXT2_FL_INHERITED (EXT2_SECRM_FL | EXT2_UNRM_FL | EXT2_COMPR_FL |\
- EXT2_SYNC_FL | EXT2_IMMUTABLE_FL | EXT2_APPEND_FL |\
- EXT2_NODUMP_FL | EXT2_NOATIME_FL | EXT2_COMPRBLK_FL|\
+ EXT2_SYNC_FL | EXT2_NODUMP_FL |\
+ EXT2_NOATIME_FL | EXT2_COMPRBLK_FL |\
EXT2_NOCOMP_FL | EXT2_JOURNAL_DATA_FL |\
EXT2_NOTAIL_FL | EXT2_DIRSYNC_FL)
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 81965cc..dec9911 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -180,8 +180,8 @@
/* Flags that should be inherited by new inodes from their parent. */
#define EXT3_FL_INHERITED (EXT3_SECRM_FL | EXT3_UNRM_FL | EXT3_COMPR_FL |\
- EXT3_SYNC_FL | EXT3_IMMUTABLE_FL | EXT3_APPEND_FL |\
- EXT3_NODUMP_FL | EXT3_NOATIME_FL | EXT3_COMPRBLK_FL|\
+ EXT3_SYNC_FL | EXT3_NODUMP_FL |\
+ EXT3_NOATIME_FL | EXT3_COMPRBLK_FL |\
EXT3_NOCOMPR_FL | EXT3_JOURNAL_DATA_FL |\
EXT3_NOTAIL_FL | EXT3_DIRSYNC_FL)
@@ -381,7 +381,7 @@
* Mount flags
*/
#define EXT3_MOUNT_CHECK 0x00001 /* Do mount-time checks */
-#define EXT3_MOUNT_OLDALLOC 0x00002 /* Don't use the new Orlov allocator */
+/* EXT3_MOUNT_OLDALLOC was there */
#define EXT3_MOUNT_GRPID 0x00004 /* Create files with directory's group */
#define EXT3_MOUNT_DEBUG 0x00008 /* Some debugging messages */
#define EXT3_MOUNT_ERRORS_CONT 0x00010 /* Continue on errors */
diff --git a/include/linux/ext3_fs_sb.h b/include/linux/ext3_fs_sb.h
index 258088a..6436525 100644
--- a/include/linux/ext3_fs_sb.h
+++ b/include/linux/ext3_fs_sb.h
@@ -76,10 +76,6 @@
struct mutex s_resize_lock;
unsigned long s_commit_interval;
struct block_device *journal_bdev;
-#ifdef CONFIG_JBD_DEBUG
- struct timer_list turn_ro_timer; /* For turning read-only (crash simulation) */
- wait_queue_head_t ro_wait_queue; /* For people waiting for the fs to go read-only */
-#endif
#ifdef CONFIG_QUOTA
char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7a049fd..0c4df26 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -768,14 +768,25 @@
/* Stat data, not accessed from path walking */
unsigned long i_ino;
- unsigned int i_nlink;
+ /*
+ * Filesystems may only read i_nlink directly. They shall use the
+ * following functions for modification:
+ *
+ * (set|clear|inc|drop)_nlink
+ * inode_(inc|dec)_link_count
+ */
+ union {
+ const unsigned int i_nlink;
+ unsigned int __i_nlink;
+ };
dev_t i_rdev;
- loff_t i_size;
struct timespec i_atime;
struct timespec i_mtime;
struct timespec i_ctime;
- unsigned int i_blkbits;
+ spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
+ unsigned short i_bytes;
blkcnt_t i_blocks;
+ loff_t i_size;
#ifdef __NEED_I_SIZE_ORDERED
seqcount_t i_size_seqcount;
@@ -783,7 +794,6 @@
/* Misc */
unsigned long i_state;
- spinlock_t i_lock; /* i_blocks, i_bytes, maybe i_size */
struct mutex i_mutex;
unsigned long dirtied_when; /* jiffies of first dirtying */
@@ -797,9 +807,10 @@
struct rcu_head i_rcu;
};
atomic_t i_count;
+ unsigned int i_blkbits;
u64 i_version;
- unsigned short i_bytes;
atomic_t i_dio_count;
+ atomic_t i_writecount;
const struct file_operations *i_fop; /* former ->i_op->default_file_ops */
struct file_lock *i_flock;
struct address_space i_data;
@@ -823,7 +834,6 @@
#ifdef CONFIG_IMA
atomic_t i_readcount; /* struct files open RO */
#endif
- atomic_t i_writecount;
void *i_private; /* fs or device private pointer */
};
@@ -1755,6 +1765,19 @@
}
/**
+ * set_nlink - directly set an inode's link count
+ * @inode: inode
+ * @nlink: new nlink (should be non-zero)
+ *
+ * This is a low-level filesystem helper to replace any
+ * direct filesystem manipulation of i_nlink.
+ */
+static inline void set_nlink(struct inode *inode, unsigned int nlink)
+{
+ inode->__i_nlink = nlink;
+}
+
+/**
* inc_nlink - directly increment an inode's link count
* @inode: inode
*
@@ -1764,7 +1787,7 @@
*/
static inline void inc_nlink(struct inode *inode)
{
- inode->i_nlink++;
+ inode->__i_nlink++;
}
static inline void inode_inc_link_count(struct inode *inode)
@@ -1786,7 +1809,7 @@
*/
static inline void drop_nlink(struct inode *inode)
{
- inode->i_nlink--;
+ inode->__i_nlink--;
}
/**
@@ -1799,7 +1822,7 @@
*/
static inline void clear_nlink(struct inode *inode)
{
- inode->i_nlink = 0;
+ inode->__i_nlink = 0;
}
static inline void inode_dec_link_count(struct inode *inode)
diff --git a/include/linux/hwspinlock.h b/include/linux/hwspinlock.h
index 8390efc..08a2fee 100644
--- a/include/linux/hwspinlock.h
+++ b/include/linux/hwspinlock.h
@@ -20,17 +20,49 @@
#include <linux/err.h>
#include <linux/sched.h>
+#include <linux/device.h>
/* hwspinlock mode argument */
#define HWLOCK_IRQSTATE 0x01 /* Disable interrupts, save state */
#define HWLOCK_IRQ 0x02 /* Disable interrupts, don't save state */
struct hwspinlock;
+struct hwspinlock_device;
+struct hwspinlock_ops;
+
+/**
+ * struct hwspinlock_pdata - platform data for hwspinlock drivers
+ * @base_id: base id for this hwspinlock device
+ *
+ * hwspinlock devices provide system-wide hardware locks that are used
+ * by remote processors that have no other way to achieve synchronization.
+ *
+ * To achieve that, each physical lock must have a system-wide id number
+ * that is agreed upon, otherwise remote processors can't possibly assume
+ * they're using the same hardware lock.
+ *
+ * Usually boards have a single hwspinlock device, which provides several
+ * hwspinlocks, and in this case, they can be trivially numbered 0 to
+ * (num-of-locks - 1).
+ *
+ * In case boards have several hwspinlocks devices, a different base id
+ * should be used for each hwspinlock device (they can't all use 0 as
+ * a starting id!).
+ *
+ * This platform data structure should be used to provide the base id
+ * for each device (which is trivially 0 when only a single hwspinlock
+ * device exists). It can be shared between different platforms, hence
+ * its location.
+ */
+struct hwspinlock_pdata {
+ int base_id;
+};
#if defined(CONFIG_HWSPINLOCK) || defined(CONFIG_HWSPINLOCK_MODULE)
-int hwspin_lock_register(struct hwspinlock *lock);
-struct hwspinlock *hwspin_lock_unregister(unsigned int id);
+int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
+ const struct hwspinlock_ops *ops, int base_id, int num_locks);
+int hwspin_lock_unregister(struct hwspinlock_device *bank);
struct hwspinlock *hwspin_lock_request(void);
struct hwspinlock *hwspin_lock_request_specific(unsigned int id);
int hwspin_lock_free(struct hwspinlock *hwlock);
@@ -94,16 +126,6 @@
return 0;
}
-static inline int hwspin_lock_register(struct hwspinlock *hwlock)
-{
- return -ENODEV;
-}
-
-static inline struct hwspinlock *hwspin_lock_unregister(unsigned int id)
-{
- return NULL;
-}
-
#endif /* !CONFIG_HWSPINLOCK */
/**
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 0aa0cbd..92a0dc7 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -32,10 +32,9 @@
struct omap_i2c_bus_platform_data {
u32 clkrate;
+ u32 rev;
+ u32 flags;
void (*set_mpu_wkup_lat)(struct device *dev, long set);
- int (*device_enable) (struct platform_device *pdev);
- int (*device_shutdown) (struct platform_device *pdev);
- int (*device_idle) (struct platform_device *pdev);
};
#endif
diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h
index 6427d29..530e11b 100644
--- a/include/linux/i2c/twl4030-madc.h
+++ b/include/linux/i2c/twl4030-madc.h
@@ -129,6 +129,10 @@
#define REG_BCICTL2 0x024
#define TWL4030_BCI_ITHSENS 0x007
+/* Register and bits for GPBR1 register */
+#define TWL4030_REG_GPBR1 0x0c
+#define TWL4030_GPBR1_MADC_HFCLK_EN (1 << 7)
+
struct twl4030_madc_user_parms {
int channel;
int average;
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 3ad553e..99834e58 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -47,6 +47,7 @@
* of the irq_domain is responsible for allocating the array of
* irq_desc structures.
* @nr_irq: Number of irqs managed by the irq domain
+ * @hwirq_base: Starting number for hwirqs managed by the irq domain
* @ops: pointer to irq_domain methods
* @priv: private data pointer for use by owner. Not touched by irq_domain
* core code.
@@ -57,6 +58,7 @@
struct list_head list;
unsigned int irq_base;
unsigned int nr_irq;
+ unsigned int hwirq_base;
const struct irq_domain_ops *ops;
void *priv;
struct device_node *of_node;
@@ -72,9 +74,21 @@
static inline unsigned int irq_domain_to_irq(struct irq_domain *d,
unsigned long hwirq)
{
- return d->ops->to_irq ? d->ops->to_irq(d, hwirq) : d->irq_base + hwirq;
+ if (d->ops->to_irq)
+ return d->ops->to_irq(d, hwirq);
+ if (WARN_ON(hwirq < d->hwirq_base))
+ return 0;
+ return d->irq_base + hwirq - d->hwirq_base;
}
+#define irq_domain_for_each_hwirq(d, hw) \
+ for (hw = d->hwirq_base; hw < d->hwirq_base + d->nr_irq; hw++)
+
+#define irq_domain_for_each_irq(d, hw, irq) \
+ for (hw = d->hwirq_base, irq = irq_domain_to_irq(d, hw); \
+ hw < d->hwirq_base + d->nr_irq; \
+ hw++, irq = irq_domain_to_irq(d, hw))
+
extern void irq_domain_add(struct irq_domain *domain);
extern void irq_domain_del(struct irq_domain *domain);
#endif /* CONFIG_IRQ_DOMAIN */
diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index e6a5e34..c7acdde 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -244,6 +244,7 @@
#include <linux/fs.h>
#include <linux/sched.h>
+#include <linux/jbd_common.h>
#define J_ASSERT(assert) BUG_ON(!(assert))
@@ -270,69 +271,6 @@
#define J_EXPECT_JH(jh, expr, why...) __journal_expect(expr, ## why)
#endif
-enum jbd_state_bits {
- BH_JBD /* Has an attached ext3 journal_head */
- = BH_PrivateStart,
- BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
- BH_Freed, /* Has been freed (truncated) */
- BH_Revoked, /* Has been revoked from the log */
- BH_RevokeValid, /* Revoked flag is valid */
- BH_JBDDirty, /* Is dirty but journaled */
- BH_State, /* Pins most journal_head state */
- BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
- BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
-};
-
-BUFFER_FNS(JBD, jbd)
-BUFFER_FNS(JWrite, jwrite)
-BUFFER_FNS(JBDDirty, jbddirty)
-TAS_BUFFER_FNS(JBDDirty, jbddirty)
-BUFFER_FNS(Revoked, revoked)
-TAS_BUFFER_FNS(Revoked, revoked)
-BUFFER_FNS(RevokeValid, revokevalid)
-TAS_BUFFER_FNS(RevokeValid, revokevalid)
-BUFFER_FNS(Freed, freed)
-
-static inline struct buffer_head *jh2bh(struct journal_head *jh)
-{
- return jh->b_bh;
-}
-
-static inline struct journal_head *bh2jh(struct buffer_head *bh)
-{
- return bh->b_private;
-}
-
-static inline void jbd_lock_bh_state(struct buffer_head *bh)
-{
- bit_spin_lock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_trylock_bh_state(struct buffer_head *bh)
-{
- return bit_spin_trylock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
-{
- return bit_spin_is_locked(BH_State, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_state(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_State, &bh->b_state);
-}
-
-static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_lock(BH_JournalHead, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_JournalHead, &bh->b_state);
-}
-
struct jbd_revoke_table_s;
/**
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 38f307b..2092ea2 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -275,6 +275,7 @@
#include <linux/fs.h>
#include <linux/sched.h>
+#include <linux/jbd_common.h>
#define J_ASSERT(assert) BUG_ON(!(assert))
@@ -302,70 +303,6 @@
#define J_EXPECT_JH(jh, expr, why...) __journal_expect(expr, ## why)
#endif
-enum jbd_state_bits {
- BH_JBD /* Has an attached ext3 journal_head */
- = BH_PrivateStart,
- BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
- BH_Freed, /* Has been freed (truncated) */
- BH_Revoked, /* Has been revoked from the log */
- BH_RevokeValid, /* Revoked flag is valid */
- BH_JBDDirty, /* Is dirty but journaled */
- BH_State, /* Pins most journal_head state */
- BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
- BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
- BH_JBDPrivateStart, /* First bit available for private use by FS */
-};
-
-BUFFER_FNS(JBD, jbd)
-BUFFER_FNS(JWrite, jwrite)
-BUFFER_FNS(JBDDirty, jbddirty)
-TAS_BUFFER_FNS(JBDDirty, jbddirty)
-BUFFER_FNS(Revoked, revoked)
-TAS_BUFFER_FNS(Revoked, revoked)
-BUFFER_FNS(RevokeValid, revokevalid)
-TAS_BUFFER_FNS(RevokeValid, revokevalid)
-BUFFER_FNS(Freed, freed)
-
-static inline struct buffer_head *jh2bh(struct journal_head *jh)
-{
- return jh->b_bh;
-}
-
-static inline struct journal_head *bh2jh(struct buffer_head *bh)
-{
- return bh->b_private;
-}
-
-static inline void jbd_lock_bh_state(struct buffer_head *bh)
-{
- bit_spin_lock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_trylock_bh_state(struct buffer_head *bh)
-{
- return bit_spin_trylock(BH_State, &bh->b_state);
-}
-
-static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
-{
- return bit_spin_is_locked(BH_State, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_state(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_State, &bh->b_state);
-}
-
-static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_lock(BH_JournalHead, &bh->b_state);
-}
-
-static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
-{
- bit_spin_unlock(BH_JournalHead, &bh->b_state);
-}
-
/* Flags in jbd_inode->i_flags */
#define __JI_COMMIT_RUNNING 0
/* Commit of the inode data in progress. We use this flag to protect us from
@@ -1106,9 +1043,9 @@
*/
extern handle_t *jbd2_journal_start(journal_t *, int nblocks);
-extern handle_t *jbd2__journal_start(journal_t *, int nblocks, int gfp_mask);
+extern handle_t *jbd2__journal_start(journal_t *, int nblocks, gfp_t gfp_mask);
extern int jbd2_journal_restart(handle_t *, int nblocks);
-extern int jbd2__journal_restart(handle_t *, int nblocks, int gfp_mask);
+extern int jbd2__journal_restart(handle_t *, int nblocks, gfp_t gfp_mask);
extern int jbd2_journal_extend (handle_t *, int nblocks);
extern int jbd2_journal_get_write_access(handle_t *, struct buffer_head *);
extern int jbd2_journal_get_create_access (handle_t *, struct buffer_head *);
diff --git a/include/linux/jbd_common.h b/include/linux/jbd_common.h
new file mode 100644
index 0000000..6230f85
--- /dev/null
+++ b/include/linux/jbd_common.h
@@ -0,0 +1,68 @@
+#ifndef _LINUX_JBD_STATE_H
+#define _LINUX_JBD_STATE_H
+
+enum jbd_state_bits {
+ BH_JBD /* Has an attached ext3 journal_head */
+ = BH_PrivateStart,
+ BH_JWrite, /* Being written to log (@@@ DEBUGGING) */
+ BH_Freed, /* Has been freed (truncated) */
+ BH_Revoked, /* Has been revoked from the log */
+ BH_RevokeValid, /* Revoked flag is valid */
+ BH_JBDDirty, /* Is dirty but journaled */
+ BH_State, /* Pins most journal_head state */
+ BH_JournalHead, /* Pins bh->b_private and jh->b_bh */
+ BH_Unshadow, /* Dummy bit, for BJ_Shadow wakeup filtering */
+ BH_JBDPrivateStart, /* First bit available for private use by FS */
+};
+
+BUFFER_FNS(JBD, jbd)
+BUFFER_FNS(JWrite, jwrite)
+BUFFER_FNS(JBDDirty, jbddirty)
+TAS_BUFFER_FNS(JBDDirty, jbddirty)
+BUFFER_FNS(Revoked, revoked)
+TAS_BUFFER_FNS(Revoked, revoked)
+BUFFER_FNS(RevokeValid, revokevalid)
+TAS_BUFFER_FNS(RevokeValid, revokevalid)
+BUFFER_FNS(Freed, freed)
+
+static inline struct buffer_head *jh2bh(struct journal_head *jh)
+{
+ return jh->b_bh;
+}
+
+static inline struct journal_head *bh2jh(struct buffer_head *bh)
+{
+ return bh->b_private;
+}
+
+static inline void jbd_lock_bh_state(struct buffer_head *bh)
+{
+ bit_spin_lock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_trylock_bh_state(struct buffer_head *bh)
+{
+ return bit_spin_trylock(BH_State, &bh->b_state);
+}
+
+static inline int jbd_is_locked_bh_state(struct buffer_head *bh)
+{
+ return bit_spin_is_locked(BH_State, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_state(struct buffer_head *bh)
+{
+ bit_spin_unlock(BH_State, &bh->b_state);
+}
+
+static inline void jbd_lock_bh_journal_head(struct buffer_head *bh)
+{
+ bit_spin_lock(BH_JournalHead, &bh->b_state);
+}
+
+static inline void jbd_unlock_bh_journal_head(struct buffer_head *bh)
+{
+ bit_spin_unlock(BH_JournalHead, &bh->b_state);
+}
+
+#endif
diff --git a/include/linux/magic.h b/include/linux/magic.h
index 1e5df2a..2d4beab 100644
--- a/include/linux/magic.h
+++ b/include/linux/magic.h
@@ -30,11 +30,11 @@
#define ANON_INODE_FS_MAGIC 0x09041934
#define PSTOREFS_MAGIC 0x6165676C
-#define MINIX_SUPER_MAGIC 0x137F /* original minix fs */
-#define MINIX_SUPER_MAGIC2 0x138F /* minix fs, 30 char names */
-#define MINIX2_SUPER_MAGIC 0x2468 /* minix V2 fs */
-#define MINIX2_SUPER_MAGIC2 0x2478 /* minix V2 fs, 30 char names */
-#define MINIX3_SUPER_MAGIC 0x4d5a /* minix V3 fs */
+#define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */
+#define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */
+#define MINIX2_SUPER_MAGIC 0x2468 /* minix v2 fs, 14 char names */
+#define MINIX2_SUPER_MAGIC2 0x2478 /* minix v2 fs, 30 char names */
+#define MINIX3_SUPER_MAGIC 0x4d5a /* minix v3 fs, 60 char names */
#define MSDOS_SUPER_MAGIC 0x4d44 /* MD */
#define NCP_SUPER_MAGIC 0x564c /* Guess, what 0x564c is :-) */
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index ac797fa..b87068a 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -78,8 +78,8 @@
extern void mem_cgroup_uncharge_page(struct page *page);
extern void mem_cgroup_uncharge_cache_page(struct page *page);
-extern void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask);
-int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem);
+extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask);
+int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg);
extern struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page);
extern struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p);
@@ -88,26 +88,28 @@
static inline
int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
rcu_read_lock();
- mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
+ memcg = mem_cgroup_from_task(rcu_dereference((mm)->owner));
rcu_read_unlock();
- return cgroup == mem;
+ return cgroup == memcg;
}
-extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *mem);
+extern struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg);
extern int
mem_cgroup_prepare_migration(struct page *page,
struct page *newpage, struct mem_cgroup **ptr, gfp_t gfp_mask);
-extern void mem_cgroup_end_migration(struct mem_cgroup *mem,
+extern void mem_cgroup_end_migration(struct mem_cgroup *memcg,
struct page *oldpage, struct page *newpage, bool migration_ok);
/*
* For memory reclaim.
*/
-int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg);
-int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg);
+int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg,
+ struct zone *zone);
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg,
+ struct zone *zone);
int mem_cgroup_select_victim_node(struct mem_cgroup *memcg);
unsigned long mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg,
int nid, int zid, unsigned int lrumask);
@@ -148,7 +150,7 @@
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
gfp_t gfp_mask,
unsigned long *total_scanned);
-u64 mem_cgroup_get_limit(struct mem_cgroup *mem);
+u64 mem_cgroup_get_limit(struct mem_cgroup *memcg);
void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx);
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -244,18 +246,20 @@
return NULL;
}
-static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
+static inline int mm_match_cgroup(struct mm_struct *mm,
+ struct mem_cgroup *memcg)
{
return 1;
}
static inline int task_in_mem_cgroup(struct task_struct *task,
- const struct mem_cgroup *mem)
+ const struct mem_cgroup *memcg)
{
return 1;
}
-static inline struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *mem)
+static inline struct cgroup_subsys_state
+ *mem_cgroup_css(struct mem_cgroup *memcg)
{
return NULL;
}
@@ -267,22 +271,22 @@
return 0;
}
-static inline void mem_cgroup_end_migration(struct mem_cgroup *mem,
+static inline void mem_cgroup_end_migration(struct mem_cgroup *memcg,
struct page *oldpage, struct page *newpage, bool migration_ok)
{
}
-static inline int mem_cgroup_get_reclaim_priority(struct mem_cgroup *mem)
+static inline int mem_cgroup_get_reclaim_priority(struct mem_cgroup *memcg)
{
return 0;
}
-static inline void mem_cgroup_note_reclaim_priority(struct mem_cgroup *mem,
+static inline void mem_cgroup_note_reclaim_priority(struct mem_cgroup *memcg,
int priority)
{
}
-static inline void mem_cgroup_record_reclaim_priority(struct mem_cgroup *mem,
+static inline void mem_cgroup_record_reclaim_priority(struct mem_cgroup *memcg,
int priority)
{
}
@@ -293,13 +297,13 @@
}
static inline int
-mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
+mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
return 1;
}
static inline int
-mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
+mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
return 1;
}
@@ -348,7 +352,7 @@
}
static inline
-u64 mem_cgroup_get_limit(struct mem_cgroup *mem)
+u64 mem_cgroup_get_limit(struct mem_cgroup *memcg)
{
return 0;
}
diff --git a/include/linux/mfd/ab5500/ab5500.h b/include/linux/mfd/ab5500/ab5500.h
new file mode 100644
index 0000000..a720051
--- /dev/null
+++ b/include/linux/mfd/ab5500/ab5500.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) ST-Ericsson 2011
+ *
+ * License Terms: GNU General Public License v2
+ */
+#ifndef MFD_AB5500_H
+#define MFD_AB5500_H
+
+#include <linux/device.h>
+
+enum ab5500_devid {
+ AB5500_DEVID_ADC,
+ AB5500_DEVID_LEDS,
+ AB5500_DEVID_POWER,
+ AB5500_DEVID_REGULATORS,
+ AB5500_DEVID_SIM,
+ AB5500_DEVID_RTC,
+ AB5500_DEVID_CHARGER,
+ AB5500_DEVID_FUELGAUGE,
+ AB5500_DEVID_VIBRATOR,
+ AB5500_DEVID_CODEC,
+ AB5500_DEVID_USB,
+ AB5500_DEVID_OTP,
+ AB5500_DEVID_VIDEO,
+ AB5500_DEVID_DBIECI,
+ AB5500_DEVID_ONSWA,
+ AB5500_NUM_DEVICES,
+};
+
+enum ab5500_banks {
+ AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
+ AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
+ AB5500_BANK_VDENC = 2,
+ AB5500_BANK_SIM_USBSIM = 3,
+ AB5500_BANK_LED = 4,
+ AB5500_BANK_ADC = 5,
+ AB5500_BANK_RTC = 6,
+ AB5500_BANK_STARTUP = 7,
+ AB5500_BANK_DBI_ECI = 8,
+ AB5500_BANK_CHG = 9,
+ AB5500_BANK_FG_BATTCOM_ACC = 10,
+ AB5500_BANK_USB = 11,
+ AB5500_BANK_IT = 12,
+ AB5500_BANK_VIBRA = 13,
+ AB5500_BANK_AUDIO_HEADSETUSB = 14,
+ AB5500_NUM_BANKS = 15,
+};
+
+enum ab5500_banks_addr {
+ AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
+ AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
+ AB5500_ADDR_VDENC = 0x06,
+ AB5500_ADDR_SIM_USBSIM = 0x04,
+ AB5500_ADDR_LED = 0x10,
+ AB5500_ADDR_ADC = 0x0A,
+ AB5500_ADDR_RTC = 0x0F,
+ AB5500_ADDR_STARTUP = 0x03,
+ AB5500_ADDR_DBI_ECI = 0x07,
+ AB5500_ADDR_CHG = 0x0B,
+ AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
+ AB5500_ADDR_USB = 0x05,
+ AB5500_ADDR_IT = 0x0E,
+ AB5500_ADDR_VIBRA = 0x02,
+ AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
+};
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB5500_IT_SOURCE0_REG 0x20
+#define AB5500_IT_SOURCE1_REG 0x21
+#define AB5500_IT_SOURCE2_REG 0x22
+#define AB5500_IT_SOURCE3_REG 0x23
+#define AB5500_IT_SOURCE4_REG 0x24
+#define AB5500_IT_SOURCE5_REG 0x25
+#define AB5500_IT_SOURCE6_REG 0x26
+#define AB5500_IT_SOURCE7_REG 0x27
+#define AB5500_IT_SOURCE8_REG 0x28
+#define AB5500_IT_SOURCE9_REG 0x29
+#define AB5500_IT_SOURCE10_REG 0x2A
+#define AB5500_IT_SOURCE11_REG 0x2B
+#define AB5500_IT_SOURCE12_REG 0x2C
+#define AB5500_IT_SOURCE13_REG 0x2D
+#define AB5500_IT_SOURCE14_REG 0x2E
+#define AB5500_IT_SOURCE15_REG 0x2F
+#define AB5500_IT_SOURCE16_REG 0x30
+#define AB5500_IT_SOURCE17_REG 0x31
+#define AB5500_IT_SOURCE18_REG 0x32
+#define AB5500_IT_SOURCE19_REG 0x33
+#define AB5500_IT_SOURCE20_REG 0x34
+#define AB5500_IT_SOURCE21_REG 0x35
+#define AB5500_IT_SOURCE22_REG 0x36
+#define AB5500_IT_SOURCE23_REG 0x37
+
+#define AB5500_NUM_IRQ_REGS 23
+
+/**
+ * struct ab5500
+ * @access_mutex: lock out concurrent accesses to the AB registers
+ * @dev: a pointer to the device struct for this chip driver
+ * @ab5500_irq: the analog baseband irq
+ * @irq_base: the platform configuration irq base for subdevices
+ * @chip_name: name of this chip variant
+ * @chip_id: 8 bit chip ID for this chip variant
+ * @irq_lock: a lock to protect the mask
+ * @abb_events: a local bit mask of the prcmu wakeup events
+ * @event_mask: a local copy of the mask event registers
+ * @last_event_mask: a copy of the last event_mask written to hardware
+ * @startup_events: a copy of the first reading of the event registers
+ * @startup_events_read: whether the first events have been read
+ */
+struct ab5500 {
+ struct mutex access_mutex;
+ struct device *dev;
+ unsigned int ab5500_irq;
+ unsigned int irq_base;
+ char chip_name[32];
+ u8 chip_id;
+ struct mutex irq_lock;
+ u32 abb_events;
+ u8 mask[AB5500_NUM_IRQ_REGS];
+ u8 oldmask[AB5500_NUM_IRQ_REGS];
+ u8 startup_events[AB5500_NUM_IRQ_REGS];
+ bool startup_events_read;
+#ifdef CONFIG_DEBUG_FS
+ unsigned int debug_bank;
+ unsigned int debug_address;
+#endif
+};
+
+struct ab5500_platform_data {
+ struct {unsigned int base; unsigned int count; } irq;
+ void *dev_data[AB5500_NUM_DEVICES];
+ struct abx500_init_settings *init_settings;
+ unsigned int init_settings_sz;
+ bool pm_power_off;
+};
+
+#endif /* MFD_AB5500_H */
diff --git a/include/linux/mfd/ab8500/gpadc.h b/include/linux/mfd/ab8500/gpadc.h
index 46b9540..2529667 100644
--- a/include/linux/mfd/ab8500/gpadc.h
+++ b/include/linux/mfd/ab8500/gpadc.h
@@ -27,6 +27,9 @@
struct ab8500_gpadc;
struct ab8500_gpadc *ab8500_gpadc_get(char *name);
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input);
+int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel);
+int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+ u8 channel, int ad_value);
#endif /* _AB8500_GPADC_H */
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 896b5e4..9970337 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,7 +6,7 @@
*
* ABX500 core access functions.
* The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab3550, ab5500, and ab8500.
+ * ab3100, ab5500, and ab8500.
*
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
@@ -29,17 +29,16 @@
#define AB3100_P1G 0xc6
#define AB3100_R2A 0xc7
#define AB3100_R2B 0xc8
-#define AB3550_P1A 0x10
#define AB5500_1_0 0x20
-#define AB5500_2_0 0x21
-#define AB5500_2_1 0x22
+#define AB5500_1_1 0x21
+#define AB5500_2_0 0x24
/* AB8500 CIDs*/
-#define AB8500_CUTEARLY 0x00
#define AB8500_CUT1P0 0x10
#define AB8500_CUT1P1 0x11
#define AB8500_CUT2P0 0x20
#define AB8500_CUT3P0 0x30
+#define AB8500_CUT3P3 0x33
/*
* AB3100, EVENTA1, A2 and A3 event register flags
@@ -143,39 +142,6 @@
int ab3100_event_unregister(struct ab3100 *ab3100,
struct notifier_block *nb);
-/* AB3550, STR register flags */
-#define AB3550_STR_ONSWA (0x01)
-#define AB3550_STR_ONSWB (0x02)
-#define AB3550_STR_ONSWC (0x04)
-#define AB3550_STR_DCIO (0x08)
-#define AB3550_STR_BOOT_MODE (0x10)
-#define AB3550_STR_SIM_OFF (0x20)
-#define AB3550_STR_BATT_REMOVAL (0x40)
-#define AB3550_STR_VBUS (0x80)
-
-/* Interrupt mask registers */
-#define AB3550_IMR1 0x29
-#define AB3550_IMR2 0x2a
-#define AB3550_IMR3 0x2b
-#define AB3550_IMR4 0x2c
-#define AB3550_IMR5 0x2d
-
-enum ab3550_devid {
- AB3550_DEVID_ADC,
- AB3550_DEVID_DAC,
- AB3550_DEVID_LEDS,
- AB3550_DEVID_POWER,
- AB3550_DEVID_REGULATORS,
- AB3550_DEVID_SIM,
- AB3550_DEVID_UART,
- AB3550_DEVID_RTC,
- AB3550_DEVID_CHARGER,
- AB3550_DEVID_FUELGAUGE,
- AB3550_DEVID_VIBRATOR,
- AB3550_DEVID_CODEC,
- AB3550_NUM_DEVICES,
-};
-
/**
* struct abx500_init_setting
* Initial value of the registers for driver to use during setup.
@@ -186,18 +152,6 @@
u8 setting;
};
-/**
- * struct ab3550_platform_data
- * Data supplied to initialize board connections to the AB3550
- */
-struct ab3550_platform_data {
- struct {unsigned int base; unsigned int count; } irq;
- void *dev_data[AB3550_NUM_DEVICES];
- size_t dev_data_sz[AB3550_NUM_DEVICES];
- struct abx500_init_settings *init_settings;
- unsigned int init_settings_sz;
-};
-
int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
u8 value);
int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
index f097798..9890687 100644
--- a/include/linux/mfd/db5500-prcmu.h
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -5,21 +5,35 @@
*
* U5500 PRCMU API.
*/
-#ifndef __MACH_PRCMU_U5500_H
-#define __MACH_PRCMU_U5500_H
+#ifndef __MFD_DB5500_PRCMU_H
+#define __MFD_DB5500_PRCMU_H
-#ifdef CONFIG_UX500_SOC_DB5500
+#ifdef CONFIG_MFD_DB5500_PRCMU
void db5500_prcmu_early_init(void);
-
+int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+void db5500_prcmu_enable_wakeups(u32 wakeups);
+int db5500_prcmu_request_clock(u8 clock, bool enable);
+void db5500_prcmu_config_abb_event_readout(u32 abb_events);
+void db5500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int prcmu_resetout(u8 resoutn, u8 state);
+int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll);
+int db5500_prcmu_config_esram0_deep_sleep(u8 state);
+void db5500_prcmu_system_reset(u16 reset_code);
+u16 db5500_prcmu_get_reset_code(void);
+bool db5500_prcmu_is_ac_wake_requested(void);
+int db5500_prcmu_set_arm_opp(u8 opp);
+int db5500_prcmu_get_arm_opp(void);
#else /* !CONFIG_UX500_SOC_DB5500 */
-static inline void db5500_prcmu_early_init(void)
-{
-}
+static inline void db5500_prcmu_early_init(void) {}
static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
{
@@ -31,15 +45,75 @@
return -ENOSYS;
}
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-static inline int db5500_prcmu_config_abb_event_readout(u32 abb_events)
+static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
{
-#ifdef CONFIG_MACH_U5500_SIMULATOR
return 0;
-#else
- return -1;
-#endif
}
-#endif /* __MACH_PRCMU_U5500_H */
+static inline int db5500_prcmu_set_display_clocks(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_disable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int prcmu_resetout(u8 resoutn, u8 state)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ return 0;
+}
+
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ return 0;
+}
+
+static inline void db5500_prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 db5500_prcmu_get_reset_code(void)
+{
+ return 0;
+}
+
+static inline bool db5500_prcmu_is_ac_wake_requested(void)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_set_arm_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int db5500_prcmu_get_arm_opp(void)
+{
+ return 0;
+}
+
+
+#endif /* CONFIG_MFD_DB5500_PRCMU */
+
+#endif /* __MFD_DB5500_PRCMU_H */
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 917dbcab..60d27f7 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -11,7 +11,6 @@
#define __MFD_DB8500_PRCMU_H
#include <linux/interrupt.h>
-#include <linux/notifier.h>
/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
@@ -133,7 +132,7 @@
* @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
*/
enum ap_pwrst_trans {
- NO_TRANSITION = 0x00,
+ PRCMU_AP_NO_CHANGE = 0x00,
APEXECUTE_TO_APSLEEP = 0x01,
APIDLE_TO_APSLEEP = 0x02, /* To be removed */
PRCMU_AP_SLEEP = 0x01,
@@ -146,54 +145,6 @@
};
/**
- * enum ddr_pwrst - DDR power states definition
- * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
- * @DDR_PWR_STATE_ON:
- * @DDR_PWR_STATE_OFFLOWLAT:
- * @DDR_PWR_STATE_OFFHIGHLAT:
- */
-enum ddr_pwrst {
- DDR_PWR_STATE_UNCHANGED = 0x00,
- DDR_PWR_STATE_ON = 0x01,
- DDR_PWR_STATE_OFFLOWLAT = 0x02,
- DDR_PWR_STATE_OFFHIGHLAT = 0x03
-};
-
-/**
- * enum arm_opp - ARM OPP states definition
- * @ARM_OPP_INIT:
- * @ARM_NO_CHANGE: The ARM operating point is unchanged
- * @ARM_100_OPP: The new ARM operating point is arm100opp
- * @ARM_50_OPP: The new ARM operating point is arm50opp
- * @ARM_MAX_OPP: Operating point is "max" (more than 100)
- * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
- * @ARM_EXTCLK: The new ARM operating point is armExtClk
- */
-enum arm_opp {
- ARM_OPP_INIT = 0x00,
- ARM_NO_CHANGE = 0x01,
- ARM_100_OPP = 0x02,
- ARM_50_OPP = 0x03,
- ARM_MAX_OPP = 0x04,
- ARM_MAX_FREQ100OPP = 0x05,
- ARM_EXTCLK = 0x07
-};
-
-/**
- * enum ape_opp - APE OPP states definition
- * @APE_OPP_INIT:
- * @APE_NO_CHANGE: The APE operating point is unchanged
- * @APE_100_OPP: The new APE operating point is ape100opp
- * @APE_50_OPP: 50%
- */
-enum ape_opp {
- APE_OPP_INIT = 0x00,
- APE_NO_CHANGE = 0x01,
- APE_100_OPP = 0x02,
- APE_50_OPP = 0x03
-};
-
-/**
* enum hw_acc_state - State definition for hardware accelerator
* @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
* @HW_OFF: The hardware accelerator must be switched off
@@ -469,26 +420,6 @@
/* End of file previously known as prcmu-fw-defs_v1.h */
-/* PRCMU Wakeup defines */
-enum prcmu_wakeup_index {
- PRCMU_WAKEUP_INDEX_RTC,
- PRCMU_WAKEUP_INDEX_RTT0,
- PRCMU_WAKEUP_INDEX_RTT1,
- PRCMU_WAKEUP_INDEX_HSI0,
- PRCMU_WAKEUP_INDEX_HSI1,
- PRCMU_WAKEUP_INDEX_USB,
- PRCMU_WAKEUP_INDEX_ABB,
- PRCMU_WAKEUP_INDEX_ABB_FIFO,
- PRCMU_WAKEUP_INDEX_ARM,
- NUM_PRCMU_WAKEUP_INDICES
-};
-#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
-
-/* PRCMU QoS APE OPP class */
-#define PRCMU_QOS_APE_OPP 1
-#define PRCMU_QOS_DDR_OPP 2
-#define PRCMU_QOS_DEFAULT_VALUE -1
-
/**
* enum hw_acc_dev - enum for hw accelerators
* @HW_ACC_SVAMMDSP: for SVAMMDSP
@@ -527,64 +458,6 @@
};
/*
- * Ids for all EPODs (power domains)
- * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
- * - EPOD_ID_SVAPIPE: power domain for SVA pipe
- * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
- * - EPOD_ID_SIAPIPE: power domain for SIA pipe
- * - EPOD_ID_SGA: power domain for SGA
- * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
- * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
- * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
- * - NUM_EPOD_ID: number of power domains
- */
-#define EPOD_ID_SVAMMDSP 0
-#define EPOD_ID_SVAPIPE 1
-#define EPOD_ID_SIAMMDSP 2
-#define EPOD_ID_SIAPIPE 3
-#define EPOD_ID_SGA 4
-#define EPOD_ID_B2R2_MCDE 5
-#define EPOD_ID_ESRAM12 6
-#define EPOD_ID_ESRAM34 7
-#define NUM_EPOD_ID 8
-
-/*
- * state definition for EPOD (power domain)
- * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
- * - EPOD_STATE_OFF: The EPOD is switched off
- * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
- * retention
- * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
- * - EPOD_STATE_ON: Same as above, but with clock enabled
- */
-#define EPOD_STATE_NO_CHANGE 0x00
-#define EPOD_STATE_OFF 0x01
-#define EPOD_STATE_RAMRET 0x02
-#define EPOD_STATE_ON_CLK_OFF 0x03
-#define EPOD_STATE_ON 0x04
-
-/*
- * CLKOUT sources
- */
-#define PRCMU_CLKSRC_CLK38M 0x00
-#define PRCMU_CLKSRC_ACLK 0x01
-#define PRCMU_CLKSRC_SYSCLK 0x02
-#define PRCMU_CLKSRC_LCDCLK 0x03
-#define PRCMU_CLKSRC_SDMMCCLK 0x04
-#define PRCMU_CLKSRC_TVCLK 0x05
-#define PRCMU_CLKSRC_TIMCLK 0x06
-#define PRCMU_CLKSRC_CLK009 0x07
-/* These are only valid for CLKOUT1: */
-#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40
-#define PRCMU_CLKSRC_I2CCLK 0x41
-#define PRCMU_CLKSRC_MSP02CLK 0x42
-#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43
-#define PRCMU_CLKSRC_HSIRXCLK 0x44
-#define PRCMU_CLKSRC_HSITXCLK 0x45
-#define PRCMU_CLKSRC_ARMCLKFIX 0x46
-#define PRCMU_CLKSRC_HDMICLK 0x47
-
-/*
* Definitions for autonomous power management configuration.
*/
@@ -620,88 +493,12 @@
u8 sva_policy;
};
-/**
- * enum ddr_opp - DDR OPP states definition
- * @DDR_100_OPP: The new DDR operating point is ddr100opp
- * @DDR_50_OPP: The new DDR operating point is ddr50opp
- * @DDR_25_OPP: The new DDR operating point is ddr25opp
- */
-enum ddr_opp {
- DDR_100_OPP = 0x00,
- DDR_50_OPP = 0x01,
- DDR_25_OPP = 0x02,
-};
-
-/*
- * Clock identifiers.
- */
-enum prcmu_clock {
- PRCMU_SGACLK,
- PRCMU_UARTCLK,
- PRCMU_MSP02CLK,
- PRCMU_MSP1CLK,
- PRCMU_I2CCLK,
- PRCMU_SDMMCCLK,
- PRCMU_SLIMCLK,
- PRCMU_PER1CLK,
- PRCMU_PER2CLK,
- PRCMU_PER3CLK,
- PRCMU_PER5CLK,
- PRCMU_PER6CLK,
- PRCMU_PER7CLK,
- PRCMU_LCDCLK,
- PRCMU_BMLCLK,
- PRCMU_HSITXCLK,
- PRCMU_HSIRXCLK,
- PRCMU_HDMICLK,
- PRCMU_APEATCLK,
- PRCMU_APETRACECLK,
- PRCMU_MCDECLK,
- PRCMU_IPI2CCLK,
- PRCMU_DSIALTCLK,
- PRCMU_DMACLK,
- PRCMU_B2R2CLK,
- PRCMU_TVCLK,
- PRCMU_SSPCLK,
- PRCMU_RNGCLK,
- PRCMU_UICCCLK,
- PRCMU_NUM_REG_CLOCKS,
- PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
- PRCMU_TIMCLK,
-};
-
-/*
- * Definitions for controlling ESRAM0 in deep sleep.
- */
-#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
-#define ESRAM0_DEEP_SLEEP_STATE_RET 2
-
-#ifdef CONFIG_MFD_DB8500_PRCMU
-void __init prcmu_early_init(void);
-int prcmu_set_display_clocks(void);
-int prcmu_disable_dsipll(void);
-int prcmu_enable_dsipll(void);
-#else
-static inline void __init prcmu_early_init(void) {}
-#endif
-
#ifdef CONFIG_MFD_DB8500_PRCMU
+void db8500_prcmu_early_init(void);
int prcmu_set_rc_a2p(enum romcode_write);
enum romcode_read prcmu_get_rc_p2a(void);
enum ap_pwrst prcmu_get_xp70_current_state(void);
-int prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
-
-void prcmu_enable_wakeups(u32 wakeups);
-static inline void prcmu_disable_wakeups(void)
-{
- prcmu_enable_wakeups(0);
-}
-
-void prcmu_config_abb_event_readout(u32 abb_events);
-void prcmu_get_abb_event_buffer(void __iomem **buf);
-int prcmu_set_arm_opp(u8 opp);
-int prcmu_get_arm_opp(void);
bool prcmu_has_arm_maxopp(void);
bool prcmu_is_u8400(void);
int prcmu_set_ape_opp(u8 opp);
@@ -710,19 +507,14 @@
int prcmu_release_usb_wakeup_state(void);
int prcmu_set_ddr_opp(u8 opp);
int prcmu_get_ddr_opp(void);
-unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
-void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
/* NOTE! Use regulator framework instead */
int prcmu_set_hwacc(u16 hw_acc_dev, u8 state);
-int prcmu_set_epod(u16 epod_id, u8 epod_state);
void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
struct prcmu_auto_pm_config *idle);
bool prcmu_is_auto_pm_enabled(void);
int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
-int prcmu_request_clock(u8 clock, bool enable);
int prcmu_set_clock_divider(u8 clock, u8 divider);
-int prcmu_config_esram0_deep_sleep(u8 state);
int prcmu_config_hotdog(u8 threshold);
int prcmu_config_hotmon(u8 low, u8 high);
int prcmu_start_temp_sense(u16 cycles32k);
@@ -732,14 +524,36 @@
void prcmu_ac_wake_req(void);
void prcmu_ac_sleep_req(void);
-void prcmu_system_reset(u16 reset_code);
void prcmu_modem_reset(void);
-bool prcmu_is_ac_wake_requested(void);
void prcmu_enable_spi2(void);
void prcmu_disable_spi2(void);
+int prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int prcmu_enable_a9wdog(u8 id);
+int prcmu_disable_a9wdog(u8 id);
+int prcmu_kick_a9wdog(u8 id);
+int prcmu_load_a9wdog(u8 id, u32 val);
+
+void db8500_prcmu_system_reset(u16 reset_code);
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+void db8500_prcmu_enable_wakeups(u32 wakeups);
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db8500_prcmu_request_clock(u8 clock, bool enable);
+int db8500_prcmu_set_display_clocks(void);
+int db8500_prcmu_disable_dsipll(void);
+int db8500_prcmu_enable_dsipll(void);
+void db8500_prcmu_config_abb_event_readout(u32 abb_events);
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int db8500_prcmu_config_esram0_deep_sleep(u8 state);
+u16 db8500_prcmu_get_reset_code(void);
+bool db8500_prcmu_is_ac_wake_requested(void);
+int db8500_prcmu_set_arm_opp(u8 opp);
+int db8500_prcmu_get_arm_opp(void);
+
#else /* !CONFIG_MFD_DB8500_PRCMU */
+static inline void db8500_prcmu_early_init(void) {}
+
static inline int prcmu_set_rc_a2p(enum romcode_write code)
{
return 0;
@@ -755,34 +569,12 @@
return AP_EXECUTE;
}
-static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
- bool keep_ap_pll)
-{
- return 0;
-}
-
-static inline void prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline void prcmu_disable_wakeups(void) {}
-
-static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline int prcmu_set_arm_opp(u8 opp)
-{
- return 0;
-}
-
-static inline int prcmu_get_arm_opp(void)
-{
- return ARM_100_OPP;
-}
-
-static bool prcmu_has_arm_maxopp(void)
+static inline bool prcmu_has_arm_maxopp(void)
{
return false;
}
-static bool prcmu_is_u8400(void)
+static inline bool prcmu_is_u8400(void)
{
return false;
}
@@ -817,13 +609,6 @@
return DDR_100_OPP;
}
-static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
-{
- return 0;
-}
-
-static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
-
static inline int prcmu_set_hwacc(u16 hw_acc_dev, u8 state)
{
return 0;
@@ -844,21 +629,11 @@
return 0;
}
-static inline int prcmu_request_clock(u8 clock, bool enable)
-{
- return 0;
-}
-
static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
{
return 0;
}
-int prcmu_config_esram0_deep_sleep(u8 state)
-{
- return 0;
-}
-
static inline int prcmu_config_hotdog(u8 threshold)
{
return 0;
@@ -893,32 +668,8 @@
static inline void prcmu_ac_sleep_req(void) {}
-static inline void prcmu_system_reset(u16 reset_code) {}
-
static inline void prcmu_modem_reset(void) {}
-static inline bool prcmu_is_ac_wake_requested(void)
-{
- return false;
-}
-
-#ifndef CONFIG_UX500_SOC_DB5500
-static inline int prcmu_set_display_clocks(void)
-{
- return 0;
-}
-
-static inline int prcmu_disable_dsipll(void)
-{
- return 0;
-}
-
-static inline int prcmu_enable_dsipll(void)
-{
- return 0;
-}
-#endif
-
static inline int prcmu_enable_spi2(void)
{
return 0;
@@ -929,50 +680,95 @@
return 0;
}
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
+
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_set_display_clocks(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_disable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_enable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline u16 db8500_prcmu_get_reset_code(void)
+{
+ return 0;
+}
+
+static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+ return 0;
+}
+
+static inline int prcmu_enable_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int prcmu_disable_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int prcmu_kick_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int prcmu_load_a9wdog(u8 id, u32 val)
+{
+ return 0;
+}
+
+static inline bool db8500_prcmu_is_ac_wake_requested(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_set_arm_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_get_arm_opp(void)
+{
+ return 0;
+}
+
#endif /* !CONFIG_MFD_DB8500_PRCMU */
-#ifdef CONFIG_UX500_PRCMU_QOS_POWER
-int prcmu_qos_requirement(int pm_qos_class);
-int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
-int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
-void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
-int prcmu_qos_add_notifier(int prcmu_qos_class,
- struct notifier_block *notifier);
-int prcmu_qos_remove_notifier(int prcmu_qos_class,
- struct notifier_block *notifier);
-#else
-static inline int prcmu_qos_requirement(int prcmu_qos_class)
-{
- return 0;
-}
-
-static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
- char *name, s32 value)
-{
- return 0;
-}
-
-static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
- char *name, s32 new_value)
-{
- return 0;
-}
-
-static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
-{
-}
-
-static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
- struct notifier_block *notifier)
-{
- return 0;
-}
-static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
- struct notifier_block *notifier)
-{
- return 0;
-}
-
-#endif
-
#endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
new file mode 100644
index 0000000..bac942f
--- /dev/null
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -0,0 +1,549 @@
+/*
+ * Copyright (C) ST Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * STE Ux500 PRCMU API
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <asm/mach-types.h>
+
+/* PRCMU Wakeup defines */
+enum prcmu_wakeup_index {
+ PRCMU_WAKEUP_INDEX_RTC,
+ PRCMU_WAKEUP_INDEX_RTT0,
+ PRCMU_WAKEUP_INDEX_RTT1,
+ PRCMU_WAKEUP_INDEX_HSI0,
+ PRCMU_WAKEUP_INDEX_HSI1,
+ PRCMU_WAKEUP_INDEX_USB,
+ PRCMU_WAKEUP_INDEX_ABB,
+ PRCMU_WAKEUP_INDEX_ABB_FIFO,
+ PRCMU_WAKEUP_INDEX_ARM,
+ PRCMU_WAKEUP_INDEX_CD_IRQ,
+ NUM_PRCMU_WAKEUP_INDICES
+};
+#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
+
+/* EPOD (power domain) IDs */
+
+/*
+ * DB8500 EPODs
+ * - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
+ * - EPOD_ID_SVAPIPE: power domain for SVA pipe
+ * - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
+ * - EPOD_ID_SIAPIPE: power domain for SIA pipe
+ * - EPOD_ID_SGA: power domain for SGA
+ * - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
+ * - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
+ * - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
+ * - NUM_EPOD_ID: number of power domains
+ *
+ * TODO: These should be prefixed.
+ */
+#define EPOD_ID_SVAMMDSP 0
+#define EPOD_ID_SVAPIPE 1
+#define EPOD_ID_SIAMMDSP 2
+#define EPOD_ID_SIAPIPE 3
+#define EPOD_ID_SGA 4
+#define EPOD_ID_B2R2_MCDE 5
+#define EPOD_ID_ESRAM12 6
+#define EPOD_ID_ESRAM34 7
+#define NUM_EPOD_ID 8
+
+/*
+ * DB5500 EPODs
+ */
+#define DB5500_EPOD_ID_BASE 0x0100
+#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0)
+#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1)
+#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2)
+#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3)
+#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6)
+#define DB5500_NUM_EPOD_ID 7
+
+/*
+ * state definition for EPOD (power domain)
+ * - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
+ * - EPOD_STATE_OFF: The EPOD is switched off
+ * - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
+ * retention
+ * - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
+ * - EPOD_STATE_ON: Same as above, but with clock enabled
+ */
+#define EPOD_STATE_NO_CHANGE 0x00
+#define EPOD_STATE_OFF 0x01
+#define EPOD_STATE_RAMRET 0x02
+#define EPOD_STATE_ON_CLK_OFF 0x03
+#define EPOD_STATE_ON 0x04
+
+/*
+ * CLKOUT sources
+ */
+#define PRCMU_CLKSRC_CLK38M 0x00
+#define PRCMU_CLKSRC_ACLK 0x01
+#define PRCMU_CLKSRC_SYSCLK 0x02
+#define PRCMU_CLKSRC_LCDCLK 0x03
+#define PRCMU_CLKSRC_SDMMCCLK 0x04
+#define PRCMU_CLKSRC_TVCLK 0x05
+#define PRCMU_CLKSRC_TIMCLK 0x06
+#define PRCMU_CLKSRC_CLK009 0x07
+/* These are only valid for CLKOUT1: */
+#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40
+#define PRCMU_CLKSRC_I2CCLK 0x41
+#define PRCMU_CLKSRC_MSP02CLK 0x42
+#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43
+#define PRCMU_CLKSRC_HSIRXCLK 0x44
+#define PRCMU_CLKSRC_HSITXCLK 0x45
+#define PRCMU_CLKSRC_ARMCLKFIX 0x46
+#define PRCMU_CLKSRC_HDMICLK 0x47
+
+/*
+ * Clock identifiers.
+ */
+enum prcmu_clock {
+ PRCMU_SGACLK,
+ PRCMU_UARTCLK,
+ PRCMU_MSP02CLK,
+ PRCMU_MSP1CLK,
+ PRCMU_I2CCLK,
+ PRCMU_SDMMCCLK,
+ PRCMU_SLIMCLK,
+ PRCMU_PER1CLK,
+ PRCMU_PER2CLK,
+ PRCMU_PER3CLK,
+ PRCMU_PER5CLK,
+ PRCMU_PER6CLK,
+ PRCMU_PER7CLK,
+ PRCMU_LCDCLK,
+ PRCMU_BMLCLK,
+ PRCMU_HSITXCLK,
+ PRCMU_HSIRXCLK,
+ PRCMU_HDMICLK,
+ PRCMU_APEATCLK,
+ PRCMU_APETRACECLK,
+ PRCMU_MCDECLK,
+ PRCMU_IPI2CCLK,
+ PRCMU_DSIALTCLK,
+ PRCMU_DMACLK,
+ PRCMU_B2R2CLK,
+ PRCMU_TVCLK,
+ PRCMU_SSPCLK,
+ PRCMU_RNGCLK,
+ PRCMU_UICCCLK,
+ PRCMU_PWMCLK,
+ PRCMU_IRDACLK,
+ PRCMU_IRRCCLK,
+ PRCMU_SIACLK,
+ PRCMU_SVACLK,
+ PRCMU_NUM_REG_CLOCKS,
+ PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
+ PRCMU_TIMCLK,
+ PRCMU_PLLSOC0,
+ PRCMU_PLLSOC1,
+ PRCMU_PLLDDR,
+};
+
+/**
+ * enum ape_opp - APE OPP states definition
+ * @APE_OPP_INIT:
+ * @APE_NO_CHANGE: The APE operating point is unchanged
+ * @APE_100_OPP: The new APE operating point is ape100opp
+ * @APE_50_OPP: 50%
+ */
+enum ape_opp {
+ APE_OPP_INIT = 0x00,
+ APE_NO_CHANGE = 0x01,
+ APE_100_OPP = 0x02,
+ APE_50_OPP = 0x03
+};
+
+/**
+ * enum arm_opp - ARM OPP states definition
+ * @ARM_OPP_INIT:
+ * @ARM_NO_CHANGE: The ARM operating point is unchanged
+ * @ARM_100_OPP: The new ARM operating point is arm100opp
+ * @ARM_50_OPP: The new ARM operating point is arm50opp
+ * @ARM_MAX_OPP: Operating point is "max" (more than 100)
+ * @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
+ * @ARM_EXTCLK: The new ARM operating point is armExtClk
+ */
+enum arm_opp {
+ ARM_OPP_INIT = 0x00,
+ ARM_NO_CHANGE = 0x01,
+ ARM_100_OPP = 0x02,
+ ARM_50_OPP = 0x03,
+ ARM_MAX_OPP = 0x04,
+ ARM_MAX_FREQ100OPP = 0x05,
+ ARM_EXTCLK = 0x07
+};
+
+/**
+ * enum ddr_opp - DDR OPP states definition
+ * @DDR_100_OPP: The new DDR operating point is ddr100opp
+ * @DDR_50_OPP: The new DDR operating point is ddr50opp
+ * @DDR_25_OPP: The new DDR operating point is ddr25opp
+ */
+enum ddr_opp {
+ DDR_100_OPP = 0x00,
+ DDR_50_OPP = 0x01,
+ DDR_25_OPP = 0x02,
+};
+
+/*
+ * Definitions for controlling ESRAM0 in deep sleep.
+ */
+#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
+#define ESRAM0_DEEP_SLEEP_STATE_RET 2
+
+/**
+ * enum ddr_pwrst - DDR power states definition
+ * @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
+ * @DDR_PWR_STATE_ON:
+ * @DDR_PWR_STATE_OFFLOWLAT:
+ * @DDR_PWR_STATE_OFFHIGHLAT:
+ */
+enum ddr_pwrst {
+ DDR_PWR_STATE_UNCHANGED = 0x00,
+ DDR_PWR_STATE_ON = 0x01,
+ DDR_PWR_STATE_OFFLOWLAT = 0x02,
+ DDR_PWR_STATE_OFFHIGHLAT = 0x03
+};
+
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/db5500-prcmu.h>
+
+#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+
+static inline void __init prcmu_early_init(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_early_init();
+ else
+ return db8500_prcmu_early_init();
+}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_set_power_state(state, keep_ulp_clk,
+ keep_ap_pll);
+ else
+ return db8500_prcmu_set_power_state(state, keep_ulp_clk,
+ keep_ap_pll);
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_set_epod(epod_id, epod_state);
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups)
+{
+ if (machine_is_u5500())
+ db5500_prcmu_enable_wakeups(wakeups);
+ else
+ db8500_prcmu_enable_wakeups(wakeups);
+}
+
+static inline void prcmu_disable_wakeups(void)
+{
+ prcmu_enable_wakeups(0);
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events)
+{
+ if (machine_is_u5500())
+ db5500_prcmu_config_abb_event_readout(abb_events);
+ else
+ db8500_prcmu_config_abb_event_readout(abb_events);
+}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+ if (machine_is_u5500())
+ db5500_prcmu_get_abb_event_buffer(buf);
+ else
+ db8500_prcmu_get_abb_event_buffer(buf);
+}
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_request_clock(clock, enable);
+ else
+ return db8500_prcmu_request_clock(clock, enable);
+}
+
+int prcmu_set_ape_opp(u8 opp);
+int prcmu_get_ape_opp(void);
+int prcmu_set_ddr_opp(u8 opp);
+int prcmu_get_ddr_opp(void);
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_set_arm_opp(opp);
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_get_arm_opp();
+}
+
+static inline void prcmu_system_reset(u16 reset_code)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_system_reset(reset_code);
+ else
+ return db8500_prcmu_system_reset(reset_code);
+}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_get_reset_code();
+ else
+ return db8500_prcmu_get_reset_code();
+}
+
+void prcmu_ac_wake_req(void);
+void prcmu_ac_sleep_req(void);
+void prcmu_modem_reset(void);
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_is_ac_wake_requested();
+ else
+ return db8500_prcmu_is_ac_wake_requested();
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_set_display_clocks();
+ else
+ return db8500_prcmu_set_display_clocks();
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_disable_dsipll();
+ else
+ return db8500_prcmu_disable_dsipll();
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+ if (machine_is_u5500())
+ return db5500_prcmu_enable_dsipll();
+ else
+ return db8500_prcmu_enable_dsipll();
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+ if (machine_is_u5500())
+ return -EINVAL;
+ else
+ return db8500_prcmu_config_esram0_deep_sleep(state);
+}
+#else
+
+static inline void __init prcmu_early_init(void) {}
+
+static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ return 0;
+}
+
+static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ return 0;
+}
+
+static inline void prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline void prcmu_disable_wakeups(void) {}
+
+static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+ return 0;
+}
+
+static inline int prcmu_request_clock(u8 clock, bool enable)
+{
+ return 0;
+}
+
+static inline int prcmu_set_ape_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int prcmu_get_ape_opp(void)
+{
+ return APE_100_OPP;
+}
+
+static inline int prcmu_set_arm_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int prcmu_get_arm_opp(void)
+{
+ return ARM_100_OPP;
+}
+
+static inline int prcmu_set_ddr_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int prcmu_get_ddr_opp(void)
+{
+ return DDR_100_OPP;
+}
+
+static inline void prcmu_system_reset(u16 reset_code) {}
+
+static inline u16 prcmu_get_reset_code(void)
+{
+ return 0;
+}
+
+static inline void prcmu_ac_wake_req(void) {}
+
+static inline void prcmu_ac_sleep_req(void) {}
+
+static inline void prcmu_modem_reset(void) {}
+
+static inline bool prcmu_is_ac_wake_requested(void)
+{
+ return false;
+}
+
+static inline int prcmu_set_display_clocks(void)
+{
+ return 0;
+}
+
+static inline int prcmu_disable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int prcmu_enable_dsipll(void)
+{
+ return 0;
+}
+
+static inline int prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
+{
+ *buf = NULL;
+}
+
+#endif
+
+/* PRCMU QoS APE OPP class */
+#define PRCMU_QOS_APE_OPP 1
+#define PRCMU_QOS_DDR_OPP 2
+#define PRCMU_QOS_DEFAULT_VALUE -1
+
+#ifdef CONFIG_UX500_PRCMU_QOS_POWER
+
+unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
+void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
+void prcmu_qos_force_opp(int, s32);
+int prcmu_qos_requirement(int pm_qos_class);
+int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
+int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
+void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
+int prcmu_qos_add_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier);
+int prcmu_qos_remove_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier);
+
+#else
+
+static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
+{
+ return 0;
+}
+
+static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
+
+static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {}
+
+static inline int prcmu_qos_requirement(int prcmu_qos_class)
+{
+ return 0;
+}
+
+static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
+ char *name, s32 value)
+{
+ return 0;
+}
+
+static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
+ char *name, s32 new_value)
+{
+ return 0;
+}
+
+static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
+{
+}
+
+static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier)
+{
+ return 0;
+}
+static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
+ struct notifier_block *notifier)
+{
+ return 0;
+}
+
+#endif
+
+#endif /* __MACH_PRCMU_H */
diff --git a/include/linux/mfd/intel_msic.h b/include/linux/mfd/intel_msic.h
new file mode 100644
index 0000000..439a7a6
--- /dev/null
+++ b/include/linux/mfd/intel_msic.h
@@ -0,0 +1,456 @@
+/*
+ * include/linux/mfd/intel_msic.h - Core interface for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_INTEL_MSIC_H__
+#define __LINUX_MFD_INTEL_MSIC_H__
+
+/* ID */
+#define INTEL_MSIC_ID0 0x000 /* RO */
+#define INTEL_MSIC_ID1 0x001 /* RO */
+
+/* IRQ */
+#define INTEL_MSIC_IRQLVL1 0x002
+#define INTEL_MSIC_ADC1INT 0x003
+#define INTEL_MSIC_CCINT 0x004
+#define INTEL_MSIC_PWRSRCINT 0x005
+#define INTEL_MSIC_PWRSRCINT1 0x006
+#define INTEL_MSIC_CHRINT 0x007
+#define INTEL_MSIC_CHRINT1 0x008
+#define INTEL_MSIC_RTCIRQ 0x009
+#define INTEL_MSIC_GPIO0LVIRQ 0x00a
+#define INTEL_MSIC_GPIO1LVIRQ 0x00b
+#define INTEL_MSIC_GPIOHVIRQ 0x00c
+#define INTEL_MSIC_VRINT 0x00d
+#define INTEL_MSIC_OCAUDIO 0x00e
+#define INTEL_MSIC_ACCDET 0x00f
+#define INTEL_MSIC_RESETIRQ1 0x010
+#define INTEL_MSIC_RESETIRQ2 0x011
+#define INTEL_MSIC_MADC1INT 0x012
+#define INTEL_MSIC_MCCINT 0x013
+#define INTEL_MSIC_MPWRSRCINT 0x014
+#define INTEL_MSIC_MPWRSRCINT1 0x015
+#define INTEL_MSIC_MCHRINT 0x016
+#define INTEL_MSIC_MCHRINT1 0x017
+#define INTEL_MSIC_RTCIRQMASK 0x018
+#define INTEL_MSIC_GPIO0LVIRQMASK 0x019
+#define INTEL_MSIC_GPIO1LVIRQMASK 0x01a
+#define INTEL_MSIC_GPIOHVIRQMASK 0x01b
+#define INTEL_MSIC_VRINTMASK 0x01c
+#define INTEL_MSIC_OCAUDIOMASK 0x01d
+#define INTEL_MSIC_ACCDETMASK 0x01e
+#define INTEL_MSIC_RESETIRQ1MASK 0x01f
+#define INTEL_MSIC_RESETIRQ2MASK 0x020
+#define INTEL_MSIC_IRQLVL1MSK 0x021
+#define INTEL_MSIC_PBCONFIG 0x03e
+#define INTEL_MSIC_PBSTATUS 0x03f /* RO */
+
+/* GPIO */
+#define INTEL_MSIC_GPIO0LV7CTLO 0x040
+#define INTEL_MSIC_GPIO0LV6CTLO 0x041
+#define INTEL_MSIC_GPIO0LV5CTLO 0x042
+#define INTEL_MSIC_GPIO0LV4CTLO 0x043
+#define INTEL_MSIC_GPIO0LV3CTLO 0x044
+#define INTEL_MSIC_GPIO0LV2CTLO 0x045
+#define INTEL_MSIC_GPIO0LV1CTLO 0x046
+#define INTEL_MSIC_GPIO0LV0CTLO 0x047
+#define INTEL_MSIC_GPIO1LV7CTLOS 0x048
+#define INTEL_MSIC_GPIO1LV6CTLO 0x049
+#define INTEL_MSIC_GPIO1LV5CTLO 0x04a
+#define INTEL_MSIC_GPIO1LV4CTLO 0x04b
+#define INTEL_MSIC_GPIO1LV3CTLO 0x04c
+#define INTEL_MSIC_GPIO1LV2CTLO 0x04d
+#define INTEL_MSIC_GPIO1LV1CTLO 0x04e
+#define INTEL_MSIC_GPIO1LV0CTLO 0x04f
+#define INTEL_MSIC_GPIO0LV7CTLI 0x050
+#define INTEL_MSIC_GPIO0LV6CTLI 0x051
+#define INTEL_MSIC_GPIO0LV5CTLI 0x052
+#define INTEL_MSIC_GPIO0LV4CTLI 0x053
+#define INTEL_MSIC_GPIO0LV3CTLI 0x054
+#define INTEL_MSIC_GPIO0LV2CTLI 0x055
+#define INTEL_MSIC_GPIO0LV1CTLI 0x056
+#define INTEL_MSIC_GPIO0LV0CTLI 0x057
+#define INTEL_MSIC_GPIO1LV7CTLIS 0x058
+#define INTEL_MSIC_GPIO1LV6CTLI 0x059
+#define INTEL_MSIC_GPIO1LV5CTLI 0x05a
+#define INTEL_MSIC_GPIO1LV4CTLI 0x05b
+#define INTEL_MSIC_GPIO1LV3CTLI 0x05c
+#define INTEL_MSIC_GPIO1LV2CTLI 0x05d
+#define INTEL_MSIC_GPIO1LV1CTLI 0x05e
+#define INTEL_MSIC_GPIO1LV0CTLI 0x05f
+#define INTEL_MSIC_PWM0CLKDIV1 0x061
+#define INTEL_MSIC_PWM0CLKDIV0 0x062
+#define INTEL_MSIC_PWM1CLKDIV1 0x063
+#define INTEL_MSIC_PWM1CLKDIV0 0x064
+#define INTEL_MSIC_PWM2CLKDIV1 0x065
+#define INTEL_MSIC_PWM2CLKDIV0 0x066
+#define INTEL_MSIC_PWM0DUTYCYCLE 0x067
+#define INTEL_MSIC_PWM1DUTYCYCLE 0x068
+#define INTEL_MSIC_PWM2DUTYCYCLE 0x069
+#define INTEL_MSIC_GPIO0HV3CTLO 0x06d
+#define INTEL_MSIC_GPIO0HV2CTLO 0x06e
+#define INTEL_MSIC_GPIO0HV1CTLO 0x06f
+#define INTEL_MSIC_GPIO0HV0CTLO 0x070
+#define INTEL_MSIC_GPIO1HV3CTLO 0x071
+#define INTEL_MSIC_GPIO1HV2CTLO 0x072
+#define INTEL_MSIC_GPIO1HV1CTLO 0x073
+#define INTEL_MSIC_GPIO1HV0CTLO 0x074
+#define INTEL_MSIC_GPIO0HV3CTLI 0x075
+#define INTEL_MSIC_GPIO0HV2CTLI 0x076
+#define INTEL_MSIC_GPIO0HV1CTLI 0x077
+#define INTEL_MSIC_GPIO0HV0CTLI 0x078
+#define INTEL_MSIC_GPIO1HV3CTLI 0x079
+#define INTEL_MSIC_GPIO1HV2CTLI 0x07a
+#define INTEL_MSIC_GPIO1HV1CTLI 0x07b
+#define INTEL_MSIC_GPIO1HV0CTLI 0x07c
+
+/* SVID */
+#define INTEL_MSIC_SVIDCTRL0 0x080
+#define INTEL_MSIC_SVIDCTRL1 0x081
+#define INTEL_MSIC_SVIDCTRL2 0x082
+#define INTEL_MSIC_SVIDTXLASTPKT3 0x083 /* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT2 0x084 /* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT1 0x085 /* RO */
+#define INTEL_MSIC_SVIDTXLASTPKT0 0x086 /* RO */
+#define INTEL_MSIC_SVIDPKTOUTBYTE3 0x087
+#define INTEL_MSIC_SVIDPKTOUTBYTE2 0x088
+#define INTEL_MSIC_SVIDPKTOUTBYTE1 0x089
+#define INTEL_MSIC_SVIDPKTOUTBYTE0 0x08a
+#define INTEL_MSIC_SVIDRXVPDEBUG1 0x08b
+#define INTEL_MSIC_SVIDRXVPDEBUG0 0x08c
+#define INTEL_MSIC_SVIDRXLASTPKT3 0x08d /* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT2 0x08e /* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT1 0x08f /* RO */
+#define INTEL_MSIC_SVIDRXLASTPKT0 0x090 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS3 0x091 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS2 0x092 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS1 0x093 /* RO */
+#define INTEL_MSIC_SVIDRXCHKSTATUS0 0x094 /* RO */
+
+/* VREG */
+#define INTEL_MSIC_VCCLATCH 0x0c0
+#define INTEL_MSIC_VNNLATCH 0x0c1
+#define INTEL_MSIC_VCCCNT 0x0c2
+#define INTEL_MSIC_SMPSRAMP 0x0c3
+#define INTEL_MSIC_VNNCNT 0x0c4
+#define INTEL_MSIC_VNNAONCNT 0x0c5
+#define INTEL_MSIC_VCC122AONCNT 0x0c6
+#define INTEL_MSIC_V180AONCNT 0x0c7
+#define INTEL_MSIC_V500CNT 0x0c8
+#define INTEL_MSIC_VIHFCNT 0x0c9
+#define INTEL_MSIC_LDORAMP1 0x0ca
+#define INTEL_MSIC_LDORAMP2 0x0cb
+#define INTEL_MSIC_VCC108AONCNT 0x0cc
+#define INTEL_MSIC_VCC108ASCNT 0x0cd
+#define INTEL_MSIC_VCC108CNT 0x0ce
+#define INTEL_MSIC_VCCA100ASCNT 0x0cf
+#define INTEL_MSIC_VCCA100CNT 0x0d0
+#define INTEL_MSIC_VCC180AONCNT 0x0d1
+#define INTEL_MSIC_VCC180CNT 0x0d2
+#define INTEL_MSIC_VCC330CNT 0x0d3
+#define INTEL_MSIC_VUSB330CNT 0x0d4
+#define INTEL_MSIC_VCCSDIOCNT 0x0d5
+#define INTEL_MSIC_VPROG1CNT 0x0d6
+#define INTEL_MSIC_VPROG2CNT 0x0d7
+#define INTEL_MSIC_VEMMCSCNT 0x0d8
+#define INTEL_MSIC_VEMMC1CNT 0x0d9
+#define INTEL_MSIC_VEMMC2CNT 0x0da
+#define INTEL_MSIC_VAUDACNT 0x0db
+#define INTEL_MSIC_VHSPCNT 0x0dc
+#define INTEL_MSIC_VHSNCNT 0x0dd
+#define INTEL_MSIC_VHDMICNT 0x0de
+#define INTEL_MSIC_VOTGCNT 0x0df
+#define INTEL_MSIC_V1P35CNT 0x0e0
+#define INTEL_MSIC_V330AONCNT 0x0e1
+
+/* RESET */
+#define INTEL_MSIC_CHIPCNTRL 0x100 /* WO */
+#define INTEL_MSIC_ERCONFIG 0x101
+
+/* BURST */
+#define INTEL_MSIC_BATCURRENTLIMIT12 0x102
+#define INTEL_MSIC_BATTIMELIMIT12 0x103
+#define INTEL_MSIC_BATTIMELIMIT3 0x104
+#define INTEL_MSIC_BATTIMEDB 0x105
+#define INTEL_MSIC_BRSTCONFIGOUTPUTS 0x106
+#define INTEL_MSIC_BRSTCONFIGACTIONS 0x107
+#define INTEL_MSIC_BURSTCONTROLSTATUS 0x108
+
+/* RTC */
+#define INTEL_MSIC_RTCB1 0x140 /* RO */
+#define INTEL_MSIC_RTCB2 0x141 /* RO */
+#define INTEL_MSIC_RTCB3 0x142 /* RO */
+#define INTEL_MSIC_RTCB4 0x143 /* RO */
+#define INTEL_MSIC_RTCOB1 0x144
+#define INTEL_MSIC_RTCOB2 0x145
+#define INTEL_MSIC_RTCOB3 0x146
+#define INTEL_MSIC_RTCOB4 0x147
+#define INTEL_MSIC_RTCAB1 0x148
+#define INTEL_MSIC_RTCAB2 0x149
+#define INTEL_MSIC_RTCAB3 0x14a
+#define INTEL_MSIC_RTCAB4 0x14b
+#define INTEL_MSIC_RTCWAB1 0x14c
+#define INTEL_MSIC_RTCWAB2 0x14d
+#define INTEL_MSIC_RTCWAB3 0x14e
+#define INTEL_MSIC_RTCWAB4 0x14f
+#define INTEL_MSIC_RTCSC1 0x150
+#define INTEL_MSIC_RTCSC2 0x151
+#define INTEL_MSIC_RTCSC3 0x152
+#define INTEL_MSIC_RTCSC4 0x153
+#define INTEL_MSIC_RTCSTATUS 0x154 /* RO */
+#define INTEL_MSIC_RTCCONFIG1 0x155
+#define INTEL_MSIC_RTCCONFIG2 0x156
+
+/* CHARGER */
+#define INTEL_MSIC_BDTIMER 0x180
+#define INTEL_MSIC_BATTRMV 0x181
+#define INTEL_MSIC_VBUSDET 0x182
+#define INTEL_MSIC_VBUSDET1 0x183
+#define INTEL_MSIC_ADPHVDET 0x184
+#define INTEL_MSIC_ADPLVDET 0x185
+#define INTEL_MSIC_ADPDETDBDM 0x186
+#define INTEL_MSIC_LOWBATTDET 0x187
+#define INTEL_MSIC_CHRCTRL 0x188
+#define INTEL_MSIC_CHRCVOLTAGE 0x189
+#define INTEL_MSIC_CHRCCURRENT 0x18a
+#define INTEL_MSIC_SPCHARGER 0x18b
+#define INTEL_MSIC_CHRTTIME 0x18c
+#define INTEL_MSIC_CHRCTRL1 0x18d
+#define INTEL_MSIC_PWRSRCLMT 0x18e
+#define INTEL_MSIC_CHRSTWDT 0x18f
+#define INTEL_MSIC_WDTWRITE 0x190 /* WO */
+#define INTEL_MSIC_CHRSAFELMT 0x191
+#define INTEL_MSIC_SPWRSRCINT 0x192 /* RO */
+#define INTEL_MSIC_SPWRSRCINT1 0x193 /* RO */
+#define INTEL_MSIC_CHRLEDPWM 0x194
+#define INTEL_MSIC_CHRLEDCTRL 0x195
+
+/* ADC */
+#define INTEL_MSIC_ADC1CNTL1 0x1c0
+#define INTEL_MSIC_ADC1CNTL2 0x1c1
+#define INTEL_MSIC_ADC1CNTL3 0x1c2
+#define INTEL_MSIC_ADC1OFFSETH 0x1c3 /* RO */
+#define INTEL_MSIC_ADC1OFFSETL 0x1c4 /* RO */
+#define INTEL_MSIC_ADC1ADDR0 0x1c5
+#define INTEL_MSIC_ADC1ADDR1 0x1c6
+#define INTEL_MSIC_ADC1ADDR2 0x1c7
+#define INTEL_MSIC_ADC1ADDR3 0x1c8
+#define INTEL_MSIC_ADC1ADDR4 0x1c9
+#define INTEL_MSIC_ADC1ADDR5 0x1ca
+#define INTEL_MSIC_ADC1ADDR6 0x1cb
+#define INTEL_MSIC_ADC1ADDR7 0x1cc
+#define INTEL_MSIC_ADC1ADDR8 0x1cd
+#define INTEL_MSIC_ADC1ADDR9 0x1ce
+#define INTEL_MSIC_ADC1ADDR10 0x1cf
+#define INTEL_MSIC_ADC1ADDR11 0x1d0
+#define INTEL_MSIC_ADC1ADDR12 0x1d1
+#define INTEL_MSIC_ADC1ADDR13 0x1d2
+#define INTEL_MSIC_ADC1ADDR14 0x1d3
+#define INTEL_MSIC_ADC1SNS0H 0x1d4 /* RO */
+#define INTEL_MSIC_ADC1SNS0L 0x1d5 /* RO */
+#define INTEL_MSIC_ADC1SNS1H 0x1d6 /* RO */
+#define INTEL_MSIC_ADC1SNS1L 0x1d7 /* RO */
+#define INTEL_MSIC_ADC1SNS2H 0x1d8 /* RO */
+#define INTEL_MSIC_ADC1SNS2L 0x1d9 /* RO */
+#define INTEL_MSIC_ADC1SNS3H 0x1da /* RO */
+#define INTEL_MSIC_ADC1SNS3L 0x1db /* RO */
+#define INTEL_MSIC_ADC1SNS4H 0x1dc /* RO */
+#define INTEL_MSIC_ADC1SNS4L 0x1dd /* RO */
+#define INTEL_MSIC_ADC1SNS5H 0x1de /* RO */
+#define INTEL_MSIC_ADC1SNS5L 0x1df /* RO */
+#define INTEL_MSIC_ADC1SNS6H 0x1e0 /* RO */
+#define INTEL_MSIC_ADC1SNS6L 0x1e1 /* RO */
+#define INTEL_MSIC_ADC1SNS7H 0x1e2 /* RO */
+#define INTEL_MSIC_ADC1SNS7L 0x1e3 /* RO */
+#define INTEL_MSIC_ADC1SNS8H 0x1e4 /* RO */
+#define INTEL_MSIC_ADC1SNS8L 0x1e5 /* RO */
+#define INTEL_MSIC_ADC1SNS9H 0x1e6 /* RO */
+#define INTEL_MSIC_ADC1SNS9L 0x1e7 /* RO */
+#define INTEL_MSIC_ADC1SNS10H 0x1e8 /* RO */
+#define INTEL_MSIC_ADC1SNS10L 0x1e9 /* RO */
+#define INTEL_MSIC_ADC1SNS11H 0x1ea /* RO */
+#define INTEL_MSIC_ADC1SNS11L 0x1eb /* RO */
+#define INTEL_MSIC_ADC1SNS12H 0x1ec /* RO */
+#define INTEL_MSIC_ADC1SNS12L 0x1ed /* RO */
+#define INTEL_MSIC_ADC1SNS13H 0x1ee /* RO */
+#define INTEL_MSIC_ADC1SNS13L 0x1ef /* RO */
+#define INTEL_MSIC_ADC1SNS14H 0x1f0 /* RO */
+#define INTEL_MSIC_ADC1SNS14L 0x1f1 /* RO */
+#define INTEL_MSIC_ADC1BV0H 0x1f2 /* RO */
+#define INTEL_MSIC_ADC1BV0L 0x1f3 /* RO */
+#define INTEL_MSIC_ADC1BV1H 0x1f4 /* RO */
+#define INTEL_MSIC_ADC1BV1L 0x1f5 /* RO */
+#define INTEL_MSIC_ADC1BV2H 0x1f6 /* RO */
+#define INTEL_MSIC_ADC1BV2L 0x1f7 /* RO */
+#define INTEL_MSIC_ADC1BV3H 0x1f8 /* RO */
+#define INTEL_MSIC_ADC1BV3L 0x1f9 /* RO */
+#define INTEL_MSIC_ADC1BI0H 0x1fa /* RO */
+#define INTEL_MSIC_ADC1BI0L 0x1fb /* RO */
+#define INTEL_MSIC_ADC1BI1H 0x1fc /* RO */
+#define INTEL_MSIC_ADC1BI1L 0x1fd /* RO */
+#define INTEL_MSIC_ADC1BI2H 0x1fe /* RO */
+#define INTEL_MSIC_ADC1BI2L 0x1ff /* RO */
+#define INTEL_MSIC_ADC1BI3H 0x200 /* RO */
+#define INTEL_MSIC_ADC1BI3L 0x201 /* RO */
+#define INTEL_MSIC_CCCNTL 0x202
+#define INTEL_MSIC_CCOFFSETH 0x203 /* RO */
+#define INTEL_MSIC_CCOFFSETL 0x204 /* RO */
+#define INTEL_MSIC_CCADCHA 0x205 /* RO */
+#define INTEL_MSIC_CCADCLA 0x206 /* RO */
+
+/* AUDIO */
+#define INTEL_MSIC_AUDPLLCTRL 0x240
+#define INTEL_MSIC_DMICBUF0123 0x241
+#define INTEL_MSIC_DMICBUF45 0x242
+#define INTEL_MSIC_DMICGPO 0x244
+#define INTEL_MSIC_DMICMUX 0x245
+#define INTEL_MSIC_DMICCLK 0x246
+#define INTEL_MSIC_MICBIAS 0x247
+#define INTEL_MSIC_ADCCONFIG 0x248
+#define INTEL_MSIC_MICAMP1 0x249
+#define INTEL_MSIC_MICAMP2 0x24a
+#define INTEL_MSIC_NOISEMUX 0x24b
+#define INTEL_MSIC_AUDIOMUX12 0x24c
+#define INTEL_MSIC_AUDIOMUX34 0x24d
+#define INTEL_MSIC_AUDIOSINC 0x24e
+#define INTEL_MSIC_AUDIOTXEN 0x24f
+#define INTEL_MSIC_HSEPRXCTRL 0x250
+#define INTEL_MSIC_IHFRXCTRL 0x251
+#define INTEL_MSIC_VOICETXVOL 0x252
+#define INTEL_MSIC_SIDETONEVOL 0x253
+#define INTEL_MSIC_MUSICSHARVOL 0x254
+#define INTEL_MSIC_VOICETXCTRL 0x255
+#define INTEL_MSIC_HSMIXER 0x256
+#define INTEL_MSIC_DACCONFIG 0x257
+#define INTEL_MSIC_SOFTMUTE 0x258
+#define INTEL_MSIC_HSLVOLCTRL 0x259
+#define INTEL_MSIC_HSRVOLCTRL 0x25a
+#define INTEL_MSIC_IHFLVOLCTRL 0x25b
+#define INTEL_MSIC_IHFRVOLCTRL 0x25c
+#define INTEL_MSIC_DRIVEREN 0x25d
+#define INTEL_MSIC_LINEOUTCTRL 0x25e
+#define INTEL_MSIC_VIB1CTRL1 0x25f
+#define INTEL_MSIC_VIB1CTRL2 0x260
+#define INTEL_MSIC_VIB1CTRL3 0x261
+#define INTEL_MSIC_VIB1SPIPCM_1 0x262
+#define INTEL_MSIC_VIB1SPIPCM_2 0x263
+#define INTEL_MSIC_VIB1CTRL5 0x264
+#define INTEL_MSIC_VIB2CTRL1 0x265
+#define INTEL_MSIC_VIB2CTRL2 0x266
+#define INTEL_MSIC_VIB2CTRL3 0x267
+#define INTEL_MSIC_VIB2SPIPCM_1 0x268
+#define INTEL_MSIC_VIB2SPIPCM_2 0x269
+#define INTEL_MSIC_VIB2CTRL5 0x26a
+#define INTEL_MSIC_BTNCTRL1 0x26b
+#define INTEL_MSIC_BTNCTRL2 0x26c
+#define INTEL_MSIC_PCM1TXSLOT01 0x26d
+#define INTEL_MSIC_PCM1TXSLOT23 0x26e
+#define INTEL_MSIC_PCM1TXSLOT45 0x26f
+#define INTEL_MSIC_PCM1RXSLOT0123 0x270
+#define INTEL_MSIC_PCM1RXSLOT045 0x271
+#define INTEL_MSIC_PCM2TXSLOT01 0x272
+#define INTEL_MSIC_PCM2TXSLOT23 0x273
+#define INTEL_MSIC_PCM2TXSLOT45 0x274
+#define INTEL_MSIC_PCM2RXSLOT01 0x275
+#define INTEL_MSIC_PCM2RXSLOT23 0x276
+#define INTEL_MSIC_PCM2RXSLOT45 0x277
+#define INTEL_MSIC_PCM1CTRL1 0x278
+#define INTEL_MSIC_PCM1CTRL2 0x279
+#define INTEL_MSIC_PCM1CTRL3 0x27a
+#define INTEL_MSIC_PCM2CTRL1 0x27b
+#define INTEL_MSIC_PCM2CTRL2 0x27c
+
+/* HDMI */
+#define INTEL_MSIC_HDMIPUEN 0x280
+#define INTEL_MSIC_HDMISTATUS 0x281 /* RO */
+
+/* Physical address of the start of the MSIC interrupt tree in SRAM */
+#define INTEL_MSIC_IRQ_PHYS_BASE 0xffff7fc0
+
+/**
+ * struct intel_msic_gpio_pdata - platform data for the MSIC GPIO driver
+ * @gpio_base: base number for the GPIOs
+ */
+struct intel_msic_gpio_pdata {
+ unsigned gpio_base;
+};
+
+/**
+ * struct intel_msic_ocd_pdata - platform data for the MSIC OCD driver
+ * @gpio: GPIO number used for OCD interrupts
+ *
+ * The MSIC MFD driver converts @gpio into an IRQ number and passes it to
+ * the OCD driver as %IORESOURCE_IRQ.
+ */
+struct intel_msic_ocd_pdata {
+ unsigned gpio;
+};
+
+/* MSIC embedded blocks (subdevices) */
+enum intel_msic_block {
+ INTEL_MSIC_BLOCK_TOUCH,
+ INTEL_MSIC_BLOCK_ADC,
+ INTEL_MSIC_BLOCK_BATTERY,
+ INTEL_MSIC_BLOCK_GPIO,
+ INTEL_MSIC_BLOCK_AUDIO,
+ INTEL_MSIC_BLOCK_HDMI,
+ INTEL_MSIC_BLOCK_THERMAL,
+ INTEL_MSIC_BLOCK_POWER_BTN,
+ INTEL_MSIC_BLOCK_OCD,
+
+ INTEL_MSIC_BLOCK_LAST,
+};
+
+/**
+ * struct intel_msic_platform_data - platform data for the MSIC driver
+ * @irq: array of interrupt numbers, one per device. If @irq is set to %0
+ * for a given block, the corresponding platform device is not
+ * created. For devices which don't have an interrupt, use %0xff
+ * (this is same as in SFI spec).
+ * @gpio: platform data for the MSIC GPIO driver
+ * @ocd: platform data for the MSIC OCD driver
+ *
+ * Once the MSIC driver is initialized, the register interface is ready to
+ * use. All the platform devices for subdevices are created after the
+ * register interface is ready so that we can guarantee its availability to
+ * the subdevice drivers.
+ *
+ * Interrupt numbers are passed to the subdevices via %IORESOURCE_IRQ
+ * resources of the created platform device.
+ */
+struct intel_msic_platform_data {
+ int irq[INTEL_MSIC_BLOCK_LAST];
+ struct intel_msic_gpio_pdata *gpio;
+ struct intel_msic_ocd_pdata *ocd;
+};
+
+struct intel_msic;
+
+extern int intel_msic_reg_read(unsigned short reg, u8 *val);
+extern int intel_msic_reg_write(unsigned short reg, u8 val);
+extern int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask);
+extern int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count);
+extern int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count);
+
+/*
+ * pdev_to_intel_msic - gets an MSIC instance from the platform device
+ * @pdev: platform device pointer
+ *
+ * The client drivers need to have pointer to the MSIC instance if they
+ * want to call intel_msic_irq_read(). This macro can be used for
+ * convenience to get the MSIC pointer from @pdev where needed. This is
+ * _only_ valid for devices which are managed by the MSIC.
+ */
+#define pdev_to_intel_msic(pdev) (dev_get_drvdata(pdev->dev.parent))
+
+extern int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg,
+ u8 *val);
+
+#endif /* __LINUX_MFD_INTEL_MSIC_H__ */
diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h
index 5ff2400..3f4deb6 100644
--- a/include/linux/mfd/max8997-private.h
+++ b/include/linux/mfd/max8997-private.h
@@ -326,7 +326,6 @@
int irq;
int ono;
int irq_base;
- bool wakeup;
struct mutex irqlock;
int irq_masks_cur[MAX8997_IRQ_GROUP_NR];
int irq_masks_cache[MAX8997_IRQ_GROUP_NR];
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index 7d0f3d6..a8eeda7 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -12,117 +12,6 @@
#include <linux/mfd/mc13xxx.h>
-struct mc13783;
-
-struct mc13xxx *mc13783_to_mc13xxx(struct mc13783 *mc13783);
-
-static inline void mc13783_lock(struct mc13783 *mc13783)
-{
- mc13xxx_lock(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline void mc13783_unlock(struct mc13783 *mc13783)
-{
- mc13xxx_unlock(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline int mc13783_reg_read(struct mc13783 *mc13783,
- unsigned int offset, u32 *val)
-{
- return mc13xxx_reg_read(mc13783_to_mc13xxx(mc13783), offset, val);
-}
-
-static inline int mc13783_reg_write(struct mc13783 *mc13783,
- unsigned int offset, u32 val)
-{
- return mc13xxx_reg_write(mc13783_to_mc13xxx(mc13783), offset, val);
-}
-
-static inline int mc13783_reg_rmw(struct mc13783 *mc13783,
- unsigned int offset, u32 mask, u32 val)
-{
- return mc13xxx_reg_rmw(mc13783_to_mc13xxx(mc13783), offset, mask, val);
-}
-
-static inline int mc13783_get_flags(struct mc13783 *mc13783)
-{
- return mc13xxx_get_flags(mc13783_to_mc13xxx(mc13783));
-}
-
-static inline int mc13783_irq_request(struct mc13783 *mc13783, int irq,
- irq_handler_t handler, const char *name, void *dev)
-{
- return mc13xxx_irq_request(mc13783_to_mc13xxx(mc13783), irq,
- handler, name, dev);
-}
-
-static inline int mc13783_irq_request_nounmask(struct mc13783 *mc13783, int irq,
- irq_handler_t handler, const char *name, void *dev)
-{
- return mc13xxx_irq_request_nounmask(mc13783_to_mc13xxx(mc13783), irq,
- handler, name, dev);
-}
-
-static inline int mc13783_irq_free(struct mc13783 *mc13783, int irq, void *dev)
-{
- return mc13xxx_irq_free(mc13783_to_mc13xxx(mc13783), irq, dev);
-}
-
-static inline int mc13783_irq_mask(struct mc13783 *mc13783, int irq)
-{
- return mc13xxx_irq_mask(mc13783_to_mc13xxx(mc13783), irq);
-}
-
-static inline int mc13783_irq_unmask(struct mc13783 *mc13783, int irq)
-{
- return mc13xxx_irq_unmask(mc13783_to_mc13xxx(mc13783), irq);
-}
-static inline int mc13783_irq_status(struct mc13783 *mc13783, int irq,
- int *enabled, int *pending)
-{
- return mc13xxx_irq_status(mc13783_to_mc13xxx(mc13783),
- irq, enabled, pending);
-}
-
-static inline int mc13783_irq_ack(struct mc13783 *mc13783, int irq)
-{
- return mc13xxx_irq_ack(mc13783_to_mc13xxx(mc13783), irq);
-}
-
-#define MC13783_ADC0 43
-#define MC13783_ADC0_ADREFEN (1 << 10)
-#define MC13783_ADC0_ADREFMODE (1 << 11)
-#define MC13783_ADC0_TSMOD0 (1 << 12)
-#define MC13783_ADC0_TSMOD1 (1 << 13)
-#define MC13783_ADC0_TSMOD2 (1 << 14)
-#define MC13783_ADC0_ADINC1 (1 << 16)
-#define MC13783_ADC0_ADINC2 (1 << 17)
-
-#define MC13783_ADC0_TSMOD_MASK (MC13783_ADC0_TSMOD0 | \
- MC13783_ADC0_TSMOD1 | \
- MC13783_ADC0_TSMOD2)
-
-#define mc13783_regulator_init_data mc13xxx_regulator_init_data
-#define mc13783_regulator_platform_data mc13xxx_regulator_platform_data
-#define mc13783_led_platform_data mc13xxx_led_platform_data
-#define mc13783_leds_platform_data mc13xxx_leds_platform_data
-
-#define mc13783_platform_data mc13xxx_platform_data
-#define MC13783_USE_TOUCHSCREEN MC13XXX_USE_TOUCHSCREEN
-#define MC13783_USE_CODEC MC13XXX_USE_CODEC
-#define MC13783_USE_ADC MC13XXX_USE_ADC
-#define MC13783_USE_RTC MC13XXX_USE_RTC
-#define MC13783_USE_REGULATOR MC13XXX_USE_REGULATOR
-#define MC13783_USE_LED MC13XXX_USE_LED
-
-#define MC13783_ADC_MODE_TS 1
-#define MC13783_ADC_MODE_SINGLE_CHAN 2
-#define MC13783_ADC_MODE_MULT_CHAN 3
-
-int mc13783_adc_do_conversion(struct mc13783 *mc13783, unsigned int mode,
- unsigned int channel, unsigned int *sample);
-
-
#define MC13783_REG_SW1A 0
#define MC13783_REG_SW1B 1
#define MC13783_REG_SW2A 2
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index c064bea..3816c2f 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -37,6 +37,9 @@
int mc13xxx_get_flags(struct mc13xxx *mc13xxx);
+int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx,
+ unsigned int mode, unsigned int channel, unsigned int *sample);
+
#define MC13XXX_IRQ_ADCDONE 0
#define MC13XXX_IRQ_ADCBISDONE 1
#define MC13XXX_IRQ_TS 2
@@ -137,17 +140,48 @@
char tc3_period;
};
+struct mc13xxx_buttons_platform_data {
+#define MC13783_BUTTON_DBNC_0MS 0
+#define MC13783_BUTTON_DBNC_30MS 1
+#define MC13783_BUTTON_DBNC_150MS 2
+#define MC13783_BUTTON_DBNC_750MS 3
+#define MC13783_BUTTON_ENABLE (1 << 2)
+#define MC13783_BUTTON_POL_INVERT (1 << 3)
+#define MC13783_BUTTON_RESET_EN (1 << 4)
+ int b1on_flags;
+ unsigned short b1on_key;
+ int b2on_flags;
+ unsigned short b2on_key;
+ int b3on_flags;
+ unsigned short b3on_key;
+};
+
struct mc13xxx_platform_data {
#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
#define MC13XXX_USE_CODEC (1 << 1)
#define MC13XXX_USE_ADC (1 << 2)
#define MC13XXX_USE_RTC (1 << 3)
-#define MC13XXX_USE_REGULATOR (1 << 4)
-#define MC13XXX_USE_LED (1 << 5)
unsigned int flags;
struct mc13xxx_regulator_platform_data regulators;
struct mc13xxx_leds_platform_data *leds;
+ struct mc13xxx_buttons_platform_data *buttons;
};
+#define MC13XXX_ADC_MODE_TS 1
+#define MC13XXX_ADC_MODE_SINGLE_CHAN 2
+#define MC13XXX_ADC_MODE_MULT_CHAN 3
+
+#define MC13XXX_ADC0 43
+#define MC13XXX_ADC0_ADREFEN (1 << 10)
+#define MC13XXX_ADC0_TSMOD0 (1 << 12)
+#define MC13XXX_ADC0_TSMOD1 (1 << 13)
+#define MC13XXX_ADC0_TSMOD2 (1 << 14)
+#define MC13XXX_ADC0_ADINC1 (1 << 16)
+#define MC13XXX_ADC0_ADINC2 (1 << 17)
+
+#define MC13XXX_ADC0_TSMOD_MASK (MC13XXX_ADC0_TSMOD0 | \
+ MC13XXX_ADC0_TSMOD1 | \
+ MC13XXX_ADC0_TSMOD2)
+
#endif /* ifndef __LINUX_MFD_MC13XXX_H */
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index 50d4a04..a808407 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -21,6 +21,7 @@
#include <linux/mfd/pcf50633/backlight.h>
struct pcf50633;
+struct regmap;
#define PCF50633_NUM_REGULATORS 11
@@ -134,7 +135,7 @@
struct pcf50633 {
struct device *dev;
- struct i2c_client *i2c_client;
+ struct regmap *regmap;
struct pcf50633_platform_data *pdata;
int irq;
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index b6bab1b..b19176e 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -1,6 +1,18 @@
#ifndef __LINUX_MFD_TPS6586X_H
#define __LINUX_MFD_TPS6586X_H
+#define TPS6586X_SLEW_RATE_INSTANTLY 0x00
+#define TPS6586X_SLEW_RATE_110UV 0x01
+#define TPS6586X_SLEW_RATE_220UV 0x02
+#define TPS6586X_SLEW_RATE_440UV 0x03
+#define TPS6586X_SLEW_RATE_880UV 0x04
+#define TPS6586X_SLEW_RATE_1760UV 0x05
+#define TPS6586X_SLEW_RATE_3520UV 0x06
+#define TPS6586X_SLEW_RATE_7040UV 0x07
+
+#define TPS6586X_SLEW_RATE_SET 0x08
+#define TPS6586X_SLEW_RATE_MASK 0x07
+
enum {
TPS6586X_ID_SM_0,
TPS6586X_ID_SM_1,
@@ -48,6 +60,10 @@
TPS6586X_INT_RTC_ALM2,
};
+struct tps6586x_settings {
+ int slew_rate;
+};
+
struct tps6586x_subdev_info {
int id;
const char *name;
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index ed8fe0d..4b12118 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -382,6 +382,7 @@
/* Used by the interrupt controller code to post writes */
int gpio_update[WM831X_NUM_GPIO_REGS];
+ bool gpio_level[WM831X_NUM_GPIO_REGS];
struct mutex auxadc_lock;
struct list_head auxadc_pending;
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
index 6268091..f44bdb7 100644
--- a/include/linux/mfd/wm8994/core.h
+++ b/include/linux/mfd/wm8994/core.h
@@ -59,6 +59,8 @@
struct device *dev;
struct regmap *regmap;
+ bool ldo_ena_always_driven;
+
int gpio_base;
int irq_base;
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 97cf4f2..ea32f30 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -167,6 +167,13 @@
/* WM8958 microphone bias configuration */
int micbias[2];
+
+ /* Disable the internal pull downs on the LDOs if they are
+ * always driven (eg, connected to an always on supply or
+ * GPIO that always drives an output. If they float power
+ * consumption will rise.
+ */
+ bool ldo_ena_always_driven;
};
#endif
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 3b3e3b8..3dc3a8c 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -356,36 +356,50 @@
return page;
}
+/*
+ * The atomic page->_mapcount, starts from -1: so that transitions
+ * both from it and to it can be tracked, using atomic_inc_and_test
+ * and atomic_add_negative(-1).
+ */
+static inline void reset_page_mapcount(struct page *page)
+{
+ atomic_set(&(page)->_mapcount, -1);
+}
+
+static inline int page_mapcount(struct page *page)
+{
+ return atomic_read(&(page)->_mapcount) + 1;
+}
+
static inline int page_count(struct page *page)
{
return atomic_read(&compound_head(page)->_count);
}
-static inline void get_page(struct page *page)
+static inline void get_huge_page_tail(struct page *page)
{
/*
- * Getting a normal page or the head of a compound page
- * requires to already have an elevated page->_count. Only if
- * we're getting a tail page, the elevated page->_count is
- * required only in the head page, so for tail pages the
- * bugcheck only verifies that the page->_count isn't
- * negative.
+ * __split_huge_page_refcount() cannot run
+ * from under us.
*/
- VM_BUG_ON(atomic_read(&page->_count) < !PageTail(page));
- atomic_inc(&page->_count);
+ VM_BUG_ON(page_mapcount(page) < 0);
+ VM_BUG_ON(atomic_read(&page->_count) != 0);
+ atomic_inc(&page->_mapcount);
+}
+
+extern bool __get_page_tail(struct page *page);
+
+static inline void get_page(struct page *page)
+{
+ if (unlikely(PageTail(page)))
+ if (likely(__get_page_tail(page)))
+ return;
/*
- * Getting a tail page will elevate both the head and tail
- * page->_count(s).
+ * Getting a normal page or the head of a compound page
+ * requires to already have an elevated page->_count.
*/
- if (unlikely(PageTail(page))) {
- /*
- * This is safe only because
- * __split_huge_page_refcount can't run under
- * get_page().
- */
- VM_BUG_ON(atomic_read(&page->first_page->_count) <= 0);
- atomic_inc(&page->first_page->_count);
- }
+ VM_BUG_ON(atomic_read(&page->_count) <= 0);
+ atomic_inc(&page->_count);
}
static inline struct page *virt_to_head_page(const void *x)
@@ -804,21 +818,6 @@
}
/*
- * The atomic page->_mapcount, like _count, starts from -1:
- * so that transitions both from it and to it can be tracked,
- * using atomic_inc_and_test and atomic_add_negative(-1).
- */
-static inline void reset_page_mapcount(struct page *page)
-{
- atomic_set(&(page)->_mapcount, -1);
-}
-
-static inline int page_mapcount(struct page *page)
-{
- return atomic_read(&(page)->_mapcount) + 1;
-}
-
-/*
* Return true if this page is mapped into pagetables.
*/
static inline int page_mapped(struct page *page)
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 3e01a19..5b42f1b 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -62,10 +62,23 @@
struct {
union {
- atomic_t _mapcount; /* Count of ptes mapped in mms,
- * to show when page is mapped
- * & limit reverse map searches.
- */
+ /*
+ * Count of ptes mapped in
+ * mms, to show when page is
+ * mapped & limit reverse map
+ * searches.
+ *
+ * Used also for tail pages
+ * refcounting instead of
+ * _count. Tail pages cannot
+ * be mapped and keeping the
+ * tail page _count zero at
+ * all times guarantees
+ * get_page_unless_zero() will
+ * never succeed on tail
+ * pages.
+ */
+ atomic_t _mapcount;
struct {
unsigned inuse:16;
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 409328d..ffc0213 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -67,6 +67,7 @@
#define LOOKUP_EMPTY 0x4000
extern int user_path_at(int, const char __user *, unsigned, struct path *);
+extern int user_path_at_empty(int, const char __user *, unsigned, struct path *, int *empty);
#define user_path(name, path) user_path_at(AT_FDCWD, name, LOOKUP_FOLLOW, path)
#define user_lpath(name, path) user_path_at(AT_FDCWD, name, 0, path)
diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild
index f9930c8..c3b4548 100644
--- a/include/linux/netfilter_ipv4/Kbuild
+++ b/include/linux/netfilter_ipv4/Kbuild
@@ -12,3 +12,4 @@
header-y += ipt_ecn.h
header-y += ipt_realm.h
header-y += ipt_ttl.h
+header-y += nf_nat.h
diff --git a/include/linux/netfilter_ipv4/nf_nat.h b/include/linux/netfilter_ipv4/nf_nat.h
new file mode 100644
index 0000000..7a861d0
--- /dev/null
+++ b/include/linux/netfilter_ipv4/nf_nat.h
@@ -0,0 +1,58 @@
+#ifndef _LINUX_NF_NAT_H
+#define _LINUX_NF_NAT_H
+
+#include <linux/types.h>
+
+#define IP_NAT_RANGE_MAP_IPS 1
+#define IP_NAT_RANGE_PROTO_SPECIFIED 2
+#define IP_NAT_RANGE_PROTO_RANDOM 4
+#define IP_NAT_RANGE_PERSISTENT 8
+
+/* The protocol-specific manipulable parts of the tuple. */
+union nf_conntrack_man_proto {
+ /* Add other protocols here. */
+ __be16 all;
+
+ struct {
+ __be16 port;
+ } tcp;
+ struct {
+ __be16 port;
+ } udp;
+ struct {
+ __be16 id;
+ } icmp;
+ struct {
+ __be16 port;
+ } dccp;
+ struct {
+ __be16 port;
+ } sctp;
+ struct {
+ __be16 key; /* GRE key is 32bit, PPtP only uses 16bit */
+ } gre;
+};
+
+/* Single range specification. */
+struct nf_nat_range {
+ /* Set to OR of flags above. */
+ unsigned int flags;
+
+ /* Inclusive: network order. */
+ __be32 min_ip, max_ip;
+
+ /* Inclusive: network order */
+ union nf_conntrack_man_proto min, max;
+};
+
+/* For backwards compat: don't use in modern code. */
+struct nf_nat_multi_range_compat {
+ unsigned int rangesize; /* Must be 1. */
+
+ /* hangs off end. */
+ struct nf_nat_range range[1];
+};
+
+#define nf_nat_multi_range nf_nat_multi_range_compat
+
+#endif
diff --git a/include/linux/of.h b/include/linux/of.h
index 5dbe263..0e89aa0 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -207,6 +207,11 @@
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
+extern int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output);
+extern int of_property_count_strings(struct device_node *np,
+ const char *propname);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
@@ -283,6 +288,19 @@
return -ENOSYS;
}
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname, int index,
+ const char **out_string)
+{
+ return -ENOSYS;
+}
+
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return -ENOSYS;
+}
+
static inline const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp)
@@ -303,6 +321,16 @@
return NULL;
}
+static inline int of_alias_get_id(struct device_node *np, const char *stem)
+{
+ return -ENOSYS;
+}
+
+static inline int of_machine_is_compatible(const char *compat)
+{
+ return 0;
+}
+
#define of_match_ptr(_ptr) NULL
#define of_match_node(_matches, _node) NULL
#endif /* CONFIG_OF */
diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h
index cd2e61c..d0307ee 100644
--- a/include/linux/of_irq.h
+++ b/include/linux/of_irq.h
@@ -33,6 +33,8 @@
u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
};
+typedef int (*of_irq_init_cb_t)(struct device_node *, struct device_node *);
+
/*
* Workarounds only applied to 32bit powermac machines
*/
@@ -73,6 +75,7 @@
struct resource *res, int nr_irqs);
extern struct device_node *of_irq_find_parent(struct device_node *child);
+extern void of_irq_init(const struct of_device_id *matches);
#endif /* CONFIG_OF_IRQ */
#endif /* CONFIG_OF */
diff --git a/include/linux/pps-gpio.h b/include/linux/pps-gpio.h
new file mode 100644
index 0000000..0035abe
--- /dev/null
+++ b/include/linux/pps-gpio.h
@@ -0,0 +1,32 @@
+/*
+ * pps-gpio.h -- PPS client for GPIOs
+ *
+ *
+ * Copyright (C) 2011 James Nuss <jamesnuss@nanometrics.ca>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _PPS_GPIO_H
+#define _PPS_GPIO_H
+
+struct pps_gpio_platform_data {
+ bool assert_falling_edge;
+ bool capture_clear;
+ unsigned int gpio_pin;
+ const char *gpio_label;
+};
+
+#endif
diff --git a/include/linux/pstore.h b/include/linux/pstore.h
index cc03bbf..ea56732 100644
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -32,15 +32,15 @@
struct pstore_info {
struct module *owner;
char *name;
- struct mutex buf_mutex; /* serialize access to 'buf' */
+ spinlock_t buf_lock; /* serialize access to 'buf' */
char *buf;
size_t bufsize;
int (*open)(struct pstore_info *psi);
int (*close)(struct pstore_info *psi);
ssize_t (*read)(u64 *id, enum pstore_type_id *type,
struct timespec *time, struct pstore_info *psi);
- u64 (*write)(enum pstore_type_id type, unsigned int part,
- size_t size, struct pstore_info *psi);
+ int (*write)(enum pstore_type_id type, u64 *id,
+ unsigned int part, size_t size, struct pstore_info *psi);
int (*erase)(enum pstore_type_id type, u64 id,
struct pstore_info *psi);
void *data;
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
new file mode 100644
index 0000000..19fbd26
--- /dev/null
+++ b/include/linux/regulator/gpio-regulator.h
@@ -0,0 +1,87 @@
+/*
+ * gpio-regulator.h
+ *
+ * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on fixed.h
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Roger Quadros <ext-roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __REGULATOR_GPIO_H
+#define __REGULATOR_GPIO_H
+
+struct regulator_init_data;
+
+enum regulator_type;
+
+/**
+ * struct gpio_regulator_state - state description
+ * @value: microvolts or microamps
+ * @gpios: bitfield of gpio target-states for the value
+ *
+ * This structure describes a supported setting of the regulator
+ * and the necessary gpio-state to achieve it.
+ *
+ * The n-th bit in the bitfield describes the state of the n-th GPIO
+ * from the gpios-array defined in gpio_regulator_config below.
+ */
+struct gpio_regulator_state {
+ int value;
+ int gpios;
+};
+
+/**
+ * struct gpio_regulator_config - config structure
+ * @supply_name: Name of the regulator supply
+ * @enable_gpio: GPIO to use for enable control
+ * set to -EINVAL if not used
+ * @enable_high: Polarity of enable GPIO
+ * 1 = Active high, 0 = Active low
+ * @enabled_at_boot: Whether regulator has been enabled at
+ * boot or not. 1 = Yes, 0 = No
+ * This is used to keep the regulator at
+ * the default state
+ * @startup_delay: Start-up time in microseconds
+ * @gpios: Array containing the gpios needed to control
+ * the setting of the regulator
+ * @nr_gpios: Number of gpios
+ * @states: Array of gpio_regulator_state entries describing
+ * the gpio state for specific voltages
+ * @nr_states: Number of states available
+ * @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE
+ * @init_data: regulator_init_data
+ *
+ * This structure contains gpio-voltage regulator configuration
+ * information that must be passed by platform code to the
+ * gpio-voltage regulator driver.
+ */
+struct gpio_regulator_config {
+ const char *supply_name;
+
+ int enable_gpio;
+ unsigned enable_high:1;
+ unsigned enabled_at_boot:1;
+ unsigned startup_delay;
+
+ struct gpio *gpios;
+ int nr_gpios;
+
+ struct gpio_regulator_state *states;
+ int nr_states;
+
+ enum regulator_type type;
+ struct regulator_init_data *init_data;
+};
+
+#endif
diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h
index ce3127a..f3f13fd 100644
--- a/include/linux/regulator/machine.h
+++ b/include/linux/regulator/machine.h
@@ -95,7 +95,7 @@
*/
struct regulation_constraints {
- char *name;
+ const char *name;
/* voltage output range (inclusive) - for voltage control */
int min_uV;
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
index 0cee015..b66d13d 100644
--- a/include/linux/rio_ids.h
+++ b/include/linux/rio_ids.h
@@ -39,5 +39,6 @@
#define RIO_DID_IDTCPS1616 0x0379
#define RIO_DID_IDTVPS1616 0x0377
#define RIO_DID_IDTSPS1616 0x0378
+#define RIO_DID_TSI721 0x80ab
#endif /* LINUX_RIO_IDS_H */
diff --git a/include/linux/rtc/sirfsoc_rtciobrg.h b/include/linux/rtc/sirfsoc_rtciobrg.h
new file mode 100644
index 0000000..2c92e1c
--- /dev/null
+++ b/include/linux/rtc/sirfsoc_rtciobrg.h
@@ -0,0 +1,18 @@
+/*
+ * RTC I/O Bridge interfaces for CSR SiRFprimaII
+ * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+#ifndef _SIRFSOC_RTC_IOBRG_H_
+#define _SIRFSOC_RTC_IOBRG_H_
+
+extern void sirfsoc_rtc_iobrg_besyncing(void);
+
+extern u32 sirfsoc_rtc_iobrg_readl(u32 addr);
+
+extern void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr);
+
+#endif
diff --git a/include/linux/sem.h b/include/linux/sem.h
index 1feb2de..10d6b22 100644
--- a/include/linux/sem.h
+++ b/include/linux/sem.h
@@ -83,13 +83,6 @@
struct task_struct;
-/* One semaphore structure for each semaphore in the system. */
-struct sem {
- int semval; /* current value */
- int sempid; /* pid of last operation */
- struct list_head sem_pending; /* pending single-sop operations */
-};
-
/* One sem_array data structure for each set of semaphores in the system. */
struct sem_array {
struct kern_ipc_perm ____cacheline_aligned_in_smp
@@ -103,51 +96,21 @@
int complex_count; /* pending complex operations */
};
-/* One queue for each sleeping process in the system. */
-struct sem_queue {
- struct list_head simple_list; /* queue of pending operations */
- struct list_head list; /* queue of pending operations */
- struct task_struct *sleeper; /* this process */
- struct sem_undo *undo; /* undo structure */
- int pid; /* process id of requesting process */
- int status; /* completion status of operation */
- struct sembuf *sops; /* array of pending operations */
- int nsops; /* number of operations */
- int alter; /* does the operation alter the array? */
-};
-
-/* Each task has a list of undo requests. They are executed automatically
- * when the process exits.
- */
-struct sem_undo {
- struct list_head list_proc; /* per-process list: all undos from one process. */
- /* rcu protected */
- struct rcu_head rcu; /* rcu struct for sem_undo() */
- struct sem_undo_list *ulp; /* sem_undo_list for the process */
- struct list_head list_id; /* per semaphore array list: all undos for one array */
- int semid; /* semaphore set identifier */
- short * semadj; /* array of adjustments, one per semaphore */
-};
-
-/* sem_undo_list controls shared access to the list of sem_undo structures
- * that may be shared among all a CLONE_SYSVSEM task group.
- */
-struct sem_undo_list {
- atomic_t refcnt;
- spinlock_t lock;
- struct list_head list_proc;
-};
+#ifdef CONFIG_SYSVIPC
struct sysv_sem {
struct sem_undo_list *undo_list;
};
-#ifdef CONFIG_SYSVIPC
-
extern int copy_semundo(unsigned long clone_flags, struct task_struct *tsk);
extern void exit_sem(struct task_struct *tsk);
#else
+
+struct sysv_sem {
+ /* empty */
+};
+
static inline int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
{
return 0;
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
index 30cae70..bc8c920 100644
--- a/include/linux/sh_pfc.h
+++ b/include/linux/sh_pfc.h
@@ -61,6 +61,14 @@
.reg = r, .reg_width = r_width, \
.enum_ids = (pinmux_enum_t [r_width]) \
+struct pinmux_irq {
+ int irq;
+ pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_IRQ(irq_nr, ids...) \
+ { .irq = irq_nr, .enum_ids = (pinmux_enum_t []) { ids, 0 } } \
+
struct pinmux_range {
pinmux_enum_t begin;
pinmux_enum_t end;
@@ -87,7 +95,9 @@
pinmux_enum_t *gpio_data;
unsigned int gpio_data_size;
- unsigned long *gpio_in_use;
+ struct pinmux_irq *gpio_irq;
+ unsigned int gpio_irq_size;
+
struct gpio_chip chip;
};
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 6a6b352..fe86488 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1806,12 +1806,12 @@
/**
* skb_frag_dma_map - maps a paged fragment via the DMA API
- * @device: the device to map the fragment to
+ * @dev: the device to map the fragment to
* @frag: the paged fragment to map
* @offset: the offset within the fragment (starting at the
* fragment's own offset)
* @size: the number of bytes to map
- * @direction: the direction of the mapping (%PCI_DMA_*)
+ * @dir: the direction of the mapping (%PCI_DMA_*)
*
* Maps the page associated with @frag to @device.
*/
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 9a1ec10..703cfa3 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -931,6 +931,7 @@
#ifdef __KERNEL__
#include <linux/list.h>
#include <linux/rcupdate.h>
+#include <linux/wait.h>
/* For the /proc/sys support */
struct ctl_table;
@@ -1011,6 +1012,26 @@
* cover common cases.
*/
+/* Support for userspace poll() to watch for changes */
+struct ctl_table_poll {
+ atomic_t event;
+ wait_queue_head_t wait;
+};
+
+static inline void *proc_sys_poll_event(struct ctl_table_poll *poll)
+{
+ return (void *)(unsigned long)atomic_read(&poll->event);
+}
+
+void proc_sys_poll_notify(struct ctl_table_poll *poll);
+
+#define __CTL_TABLE_POLL_INITIALIZER(name) { \
+ .event = ATOMIC_INIT(0), \
+ .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait) }
+
+#define DEFINE_CTL_TABLE_POLL(name) \
+ struct ctl_table_poll name = __CTL_TABLE_POLL_INITIALIZER(name)
+
/* A sysctl table is an array of struct ctl_table: */
struct ctl_table
{
@@ -1021,6 +1042,7 @@
struct ctl_table *child;
struct ctl_table *parent; /* Automatically set */
proc_handler *proc_handler; /* Callback for text formatting */
+ struct ctl_table_poll *poll;
void *extra1;
void *extra2;
};
diff --git a/include/linux/utsname.h b/include/linux/utsname.h
index 4e5b021..c714ed7 100644
--- a/include/linux/utsname.h
+++ b/include/linux/utsname.h
@@ -37,6 +37,14 @@
#include <linux/nsproxy.h>
#include <linux/err.h>
+enum uts_proc {
+ UTS_PROC_OSTYPE,
+ UTS_PROC_OSRELEASE,
+ UTS_PROC_VERSION,
+ UTS_PROC_HOSTNAME,
+ UTS_PROC_DOMAINNAME,
+};
+
struct user_namespace;
extern struct user_namespace init_user_ns;
@@ -80,6 +88,14 @@
}
#endif
+#ifdef CONFIG_PROC_SYSCTL
+extern void uts_proc_notify(enum uts_proc proc);
+#else
+static inline void uts_proc_notify(enum uts_proc proc)
+{
+}
+#endif
+
static inline struct new_utsname *utsname(void)
{
return ¤t->nsproxy->uts_ns->name;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 225560c..4b752d5 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -653,6 +653,10 @@
#define V4L2_BUF_FLAG_ERROR 0x0040
#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */
#define V4L2_BUF_FLAG_INPUT 0x0200 /* input field is valid */
+#define V4L2_BUF_FLAG_PREPARED 0x0400 /* Buffer is prepared for queuing */
+/* Cache handling flags */
+#define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800
+#define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000
/*
* O V E R L A Y P R E V I E W
@@ -1165,6 +1169,7 @@
V4L2_CID_POWER_LINE_FREQUENCY_DISABLED = 0,
V4L2_CID_POWER_LINE_FREQUENCY_50HZ = 1,
V4L2_CID_POWER_LINE_FREQUENCY_60HZ = 2,
+ V4L2_CID_POWER_LINE_FREQUENCY_AUTO = 3,
};
#define V4L2_CID_HUE_AUTO (V4L2_CID_BASE+25)
#define V4L2_CID_WHITE_BALANCE_TEMPERATURE (V4L2_CID_BASE+26)
@@ -2138,6 +2143,23 @@
__u32 revision; /* chip revision, chip specific */
} __attribute__ ((packed));
+/**
+ * struct v4l2_create_buffers - VIDIOC_CREATE_BUFS argument
+ * @index: on return, index of the first created buffer
+ * @count: entry: number of requested buffers,
+ * return: number of created buffers
+ * @memory: buffer memory type
+ * @format: frame format, for which buffers are requested
+ * @reserved: future extensions
+ */
+struct v4l2_create_buffers {
+ __u32 index;
+ __u32 count;
+ enum v4l2_memory memory;
+ struct v4l2_format format;
+ __u32 reserved[8];
+};
+
/*
* I O C T L C O D E S F O R V I D E O D E V I C E S
*
@@ -2228,6 +2250,11 @@
#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct v4l2_event_subscription)
#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct v4l2_event_subscription)
+/* Experimental, the below two ioctls may change over the next couple of kernel
+ versions */
+#define VIDIOC_CREATE_BUFS _IOWR('V', 92, struct v4l2_create_buffers)
+#define VIDIOC_PREPARE_BUF _IOWR('V', 93, struct v4l2_buffer)
+
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 851ebf1..4c069d8 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -131,10 +131,10 @@
* virtio_driver - operations for a virtio I/O driver
* @driver: underlying device driver (populate name and owner).
* @id_table: the ids serviced by this driver.
- * @feature_table: an array of feature numbers supported by this device.
+ * @feature_table: an array of feature numbers supported by this driver.
* @feature_table_size: number of entries in the feature table array.
* @probe: the function to call when a device is found. Returns 0 or -errno.
- * @remove: the function when a device is removed.
+ * @remove: the function to call when a device is removed.
* @config_changed: optional function to call when the device configuration
* changes; may be called in interrupt context.
*/
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 39c88c5..add4790 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -155,6 +155,9 @@
#define virtio_config_val(vdev, fbit, offset, v) \
virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
+#define virtio_config_val_len(vdev, fbit, offset, v, len) \
+ virtio_config_buf((vdev), (fbit), (offset), (v), (len))
+
static inline int virtio_config_buf(struct virtio_device *vdev,
unsigned int fbit,
unsigned int offset,
diff --git a/include/linux/virtio_mmio.h b/include/linux/virtio_mmio.h
new file mode 100644
index 0000000..27c7ede
--- /dev/null
+++ b/include/linux/virtio_mmio.h
@@ -0,0 +1,111 @@
+/*
+ * Virtio platform device driver
+ *
+ * Copyright 2011, ARM Ltd.
+ *
+ * Based on Virtio PCI driver by Anthony Liguori, copyright IBM Corp. 2007
+ *
+ * This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of IBM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _LINUX_VIRTIO_MMIO_H
+#define _LINUX_VIRTIO_MMIO_H
+
+/*
+ * Control registers
+ */
+
+/* Magic value ("virt" string) - Read Only */
+#define VIRTIO_MMIO_MAGIC_VALUE 0x000
+
+/* Virtio device version - Read Only */
+#define VIRTIO_MMIO_VERSION 0x004
+
+/* Virtio device ID - Read Only */
+#define VIRTIO_MMIO_DEVICE_ID 0x008
+
+/* Virtio vendor ID - Read Only */
+#define VIRTIO_MMIO_VENDOR_ID 0x00c
+
+/* Bitmask of the features supported by the host
+ * (32 bits per set) - Read Only */
+#define VIRTIO_MMIO_HOST_FEATURES 0x010
+
+/* Host features set selector - Write Only */
+#define VIRTIO_MMIO_HOST_FEATURES_SEL 0x014
+
+/* Bitmask of features activated by the guest
+ * (32 bits per set) - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES 0x020
+
+/* Activated features set selector - Write Only */
+#define VIRTIO_MMIO_GUEST_FEATURES_SET 0x024
+
+/* Guest's memory page size in bytes - Write Only */
+#define VIRTIO_MMIO_GUEST_PAGE_SIZE 0x028
+
+/* Queue selector - Write Only */
+#define VIRTIO_MMIO_QUEUE_SEL 0x030
+
+/* Maximum size of the currently selected queue - Read Only */
+#define VIRTIO_MMIO_QUEUE_NUM_MAX 0x034
+
+/* Queue size for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_NUM 0x038
+
+/* Used Ring alignment for the currently selected queue - Write Only */
+#define VIRTIO_MMIO_QUEUE_ALIGN 0x03c
+
+/* Guest's PFN for the currently selected queue - Read Write */
+#define VIRTIO_MMIO_QUEUE_PFN 0x040
+
+/* Queue notifier - Write Only */
+#define VIRTIO_MMIO_QUEUE_NOTIFY 0x050
+
+/* Interrupt status - Read Only */
+#define VIRTIO_MMIO_INTERRUPT_STATUS 0x060
+
+/* Interrupt acknowledge - Write Only */
+#define VIRTIO_MMIO_INTERRUPT_ACK 0x064
+
+/* Device status register - Read Write */
+#define VIRTIO_MMIO_STATUS 0x070
+
+/* The config space is defined by each driver as
+ * the per-driver configuration space - Read Write */
+#define VIRTIO_MMIO_CONFIG 0x100
+
+
+
+/*
+ * Interrupt flags (re: interrupt status & acknowledge registers)
+ */
+
+#define VIRTIO_MMIO_INT_VRING (1 << 0)
+#define VIRTIO_MMIO_INT_CONFIG (1 << 1)
+
+#endif
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 4a32cb6..36be0f6 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -135,13 +135,13 @@
vr->num = num;
vr->desc = p;
vr->avail = p + num*sizeof(struct vring_desc);
- vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + align-1)
- & ~(align - 1));
+ vr->used = (void *)(((unsigned long)&vr->avail->ring[num] + sizeof(__u16)
+ + align-1) & ~(align - 1));
}
static inline unsigned vring_size(unsigned int num, unsigned long align)
{
- return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num)
+ return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (3 + num)
+ align - 1) & ~(align - 1))
+ sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num;
}
diff --git a/include/media/ov772x.h b/include/media/ov772x.h
index 548bf11..00dbb7c 100644
--- a/include/media/ov772x.h
+++ b/include/media/ov772x.h
@@ -12,12 +12,9 @@
#ifndef __OV772X_H__
#define __OV772X_H__
-#include <media/soc_camera.h>
-
/* for flags */
#define OV772X_FLAG_VFLIP (1 << 0) /* Vertical flip image */
#define OV772X_FLAG_HFLIP (1 << 1) /* Horizontal flip image */
-#define OV772X_FLAG_8BIT (1 << 2) /* default 10 bit */
/*
* for Edge ctrl
@@ -32,22 +29,23 @@
unsigned char lower;
};
-#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */
-#define EDGE_STRENGTH_MASK 0x1F
-#define EDGE_THRESHOLD_MASK 0x0F
-#define EDGE_UPPER_MASK 0xFF
-#define EDGE_LOWER_MASK 0xFF
+#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */
+#define OV772X_EDGE_STRENGTH_MASK 0x1F
+#define OV772X_EDGE_THRESHOLD_MASK 0x0F
+#define OV772X_EDGE_UPPER_MASK 0xFF
+#define OV772X_EDGE_LOWER_MASK 0xFF
#define OV772X_AUTO_EDGECTRL(u, l) \
{ \
- .upper = (u & EDGE_UPPER_MASK), \
- .lower = (l & EDGE_LOWER_MASK), \
+ .upper = (u & OV772X_EDGE_UPPER_MASK), \
+ .lower = (l & OV772X_EDGE_LOWER_MASK), \
}
-#define OV772X_MANUAL_EDGECTRL(s, t) \
-{ \
- .strength = (s & EDGE_STRENGTH_MASK) | OV772X_MANUAL_EDGE_CTRL,\
- .threshold = (t & EDGE_THRESHOLD_MASK), \
+#define OV772X_MANUAL_EDGECTRL(s, t) \
+{ \
+ .strength = (s & OV772X_EDGE_STRENGTH_MASK) | \
+ OV772X_MANUAL_EDGE_CTRL, \
+ .threshold = (t & OV772X_EDGE_THRESHOLD_MASK), \
}
/*
diff --git a/include/media/s5k6aa.h b/include/media/s5k6aa.h
new file mode 100644
index 0000000..ba34f70
--- /dev/null
+++ b/include/media/s5k6aa.h
@@ -0,0 +1,51 @@
+/*
+ * S5K6AAFX camera sensor driver header
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef S5K6AA_H
+#define S5K6AA_H
+
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s5k6aa_gpio - data structure describing a GPIO
+ * @gpio: GPIO number
+ * @level: indicates active state of the @gpio
+ */
+struct s5k6aa_gpio {
+ int gpio;
+ int level;
+};
+
+/**
+ * struct s5k6aa_platform_data - s5k6aa driver platform data
+ * @set_power: an additional callback to the board code, called
+ * after enabling the regulators and before switching
+ * the sensor off
+ * @mclk_frequency: sensor's master clock frequency in Hz
+ * @gpio_reset: GPIO driving RESET pin
+ * @gpio_stby: GPIO driving STBY pin
+ * @nlanes: maximum number of MIPI-CSI lanes used
+ * @horiz_flip: default horizontal image flip value, non zero to enable
+ * @vert_flip: default vertical image flip value, non zero to enable
+ */
+
+struct s5k6aa_platform_data {
+ int (*set_power)(int enable);
+ unsigned long mclk_frequency;
+ struct s5k6aa_gpio gpio_reset;
+ struct s5k6aa_gpio gpio_stby;
+ enum v4l2_mbus_type bus_type;
+ u8 nlanes;
+ u8 horiz_flip;
+ u8 vert_flip;
+};
+
+#endif /* S5K6AA_H */
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 7582952..b1377b9 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -12,12 +12,14 @@
#ifndef SOC_CAMERA_H
#define SOC_CAMERA_H
+#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/videodev2.h>
#include <media/videobuf-core.h>
#include <media/videobuf2-core.h>
+#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
struct file;
@@ -37,8 +39,8 @@
unsigned char iface; /* Host number */
unsigned char devnum; /* Device number per host */
struct soc_camera_sense *sense; /* See comment in struct definition */
- struct soc_camera_ops *ops;
struct video_device *vdev;
+ struct v4l2_ctrl_handler ctrl_handler;
const struct soc_camera_format_xlate *current_fmt;
struct soc_camera_format_xlate *user_formats;
int num_user_formats;
@@ -93,14 +95,10 @@
int (*reqbufs)(struct soc_camera_device *, struct v4l2_requestbuffers *);
int (*querycap)(struct soc_camera_host *, struct v4l2_capability *);
int (*set_bus_param)(struct soc_camera_device *, __u32);
- int (*get_ctrl)(struct soc_camera_device *, struct v4l2_control *);
- int (*set_ctrl)(struct soc_camera_device *, struct v4l2_control *);
int (*get_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
int (*set_parm)(struct soc_camera_device *, struct v4l2_streamparm *);
int (*enum_fsizes)(struct soc_camera_device *, struct v4l2_frmsizeenum *);
unsigned int (*poll)(struct file *, poll_table *);
- const struct v4l2_queryctrl *controls;
- int num_controls;
};
#define SOCAM_SENSOR_INVERT_PCLK (1 << 0)
@@ -193,13 +191,6 @@
const struct soc_mbus_pixelfmt *host_fmt;
};
-struct soc_camera_ops {
- unsigned long (*query_bus_param)(struct soc_camera_device *);
- int (*set_bus_param)(struct soc_camera_device *, unsigned long);
- const struct v4l2_queryctrl *controls;
- int num_controls;
-};
-
#define SOCAM_SENSE_PCLK_CHANGED (1 << 0)
/**
@@ -226,65 +217,18 @@
unsigned long pixel_clock;
};
-static inline struct v4l2_queryctrl const *soc_camera_find_qctrl(
- struct soc_camera_ops *ops, int id)
-{
- int i;
-
- for (i = 0; i < ops->num_controls; i++)
- if (ops->controls[i].id == id)
- return &ops->controls[i];
-
- return NULL;
-}
-
-#define SOCAM_MASTER (1 << 0)
-#define SOCAM_SLAVE (1 << 1)
-#define SOCAM_HSYNC_ACTIVE_HIGH (1 << 2)
-#define SOCAM_HSYNC_ACTIVE_LOW (1 << 3)
-#define SOCAM_VSYNC_ACTIVE_HIGH (1 << 4)
-#define SOCAM_VSYNC_ACTIVE_LOW (1 << 5)
-#define SOCAM_DATAWIDTH_4 (1 << 6)
-#define SOCAM_DATAWIDTH_8 (1 << 7)
-#define SOCAM_DATAWIDTH_9 (1 << 8)
-#define SOCAM_DATAWIDTH_10 (1 << 9)
-#define SOCAM_DATAWIDTH_15 (1 << 10)
-#define SOCAM_DATAWIDTH_16 (1 << 11)
-#define SOCAM_PCLK_SAMPLE_RISING (1 << 12)
-#define SOCAM_PCLK_SAMPLE_FALLING (1 << 13)
-#define SOCAM_DATA_ACTIVE_HIGH (1 << 14)
-#define SOCAM_DATA_ACTIVE_LOW (1 << 15)
-#define SOCAM_MIPI_1LANE (1 << 16)
-#define SOCAM_MIPI_2LANE (1 << 17)
-#define SOCAM_MIPI_3LANE (1 << 18)
-#define SOCAM_MIPI_4LANE (1 << 19)
-#define SOCAM_MIPI (SOCAM_MIPI_1LANE | SOCAM_MIPI_2LANE | \
- SOCAM_MIPI_3LANE | SOCAM_MIPI_4LANE)
+#define SOCAM_DATAWIDTH(x) BIT((x) - 1)
+#define SOCAM_DATAWIDTH_4 SOCAM_DATAWIDTH(4)
+#define SOCAM_DATAWIDTH_8 SOCAM_DATAWIDTH(8)
+#define SOCAM_DATAWIDTH_9 SOCAM_DATAWIDTH(9)
+#define SOCAM_DATAWIDTH_10 SOCAM_DATAWIDTH(10)
+#define SOCAM_DATAWIDTH_15 SOCAM_DATAWIDTH(15)
+#define SOCAM_DATAWIDTH_16 SOCAM_DATAWIDTH(16)
#define SOCAM_DATAWIDTH_MASK (SOCAM_DATAWIDTH_4 | SOCAM_DATAWIDTH_8 | \
SOCAM_DATAWIDTH_9 | SOCAM_DATAWIDTH_10 | \
SOCAM_DATAWIDTH_15 | SOCAM_DATAWIDTH_16)
-static inline unsigned long soc_camera_bus_param_compatible(
- unsigned long camera_flags, unsigned long bus_flags)
-{
- unsigned long common_flags, hsync, vsync, pclk, data, buswidth, mode;
- unsigned long mipi;
-
- common_flags = camera_flags & bus_flags;
-
- hsync = common_flags & (SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW);
- vsync = common_flags & (SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW);
- pclk = common_flags & (SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING);
- data = common_flags & (SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW);
- mode = common_flags & (SOCAM_MASTER | SOCAM_SLAVE);
- buswidth = common_flags & SOCAM_DATAWIDTH_MASK;
- mipi = common_flags & SOCAM_MIPI;
-
- return ((!hsync || !vsync || !pclk || !data || !mode || !buswidth) && !mipi) ? 0 :
- common_flags;
-}
-
static inline void soc_camera_limit_side(int *start, int *length,
unsigned int start_min,
unsigned int length_min, unsigned int length_max)
@@ -300,23 +244,37 @@
*start = start_min + length_max - *length;
}
-extern unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
- unsigned long flags);
+unsigned long soc_camera_apply_sensor_flags(struct soc_camera_link *icl,
+ unsigned long flags);
+unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl,
+ const struct v4l2_mbus_config *cfg);
/* This is only temporary here - until v4l2-subdev begins to link to video_device */
#include <linux/i2c.h>
-static inline struct video_device *soc_camera_i2c_to_vdev(struct i2c_client *client)
+static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client)
{
- struct soc_camera_device *icd = client->dev.platform_data;
- return icd->vdev;
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id;
+ return icd ? icd->vdev : NULL;
}
-static inline struct soc_camera_device *soc_camera_from_vb2q(struct vb2_queue *vq)
+static inline struct soc_camera_link *soc_camera_i2c_to_link(const struct i2c_client *client)
+{
+ return client->dev.platform_data;
+}
+
+static inline struct v4l2_subdev *soc_camera_vdev_to_subdev(const struct video_device *vdev)
+{
+ struct soc_camera_device *icd = dev_get_drvdata(vdev->parent);
+ return soc_camera_to_subdev(icd);
+}
+
+static inline struct soc_camera_device *soc_camera_from_vb2q(const struct vb2_queue *vq)
{
return container_of(vq, struct soc_camera_device, vb2_vidq);
}
-static inline struct soc_camera_device *soc_camera_from_vbq(struct videobuf_queue *vq)
+static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobuf_queue *vq)
{
return container_of(vq, struct soc_camera_device, vb_vidq);
}
diff --git a/include/media/soc_camera_platform.h b/include/media/soc_camera_platform.h
index 74f0fa1..8aa4200 100644
--- a/include/media/soc_camera_platform.h
+++ b/include/media/soc_camera_platform.h
@@ -13,6 +13,7 @@
#include <linux/videodev2.h>
#include <media/soc_camera.h>
+#include <media/v4l2-mediabus.h>
struct device;
@@ -20,7 +21,8 @@
const char *format_name;
unsigned long format_depth;
struct v4l2_mbus_framefmt format;
- unsigned long bus_param;
+ unsigned long mbus_param;
+ enum v4l2_mbus_type mbus_type;
struct soc_camera_device *icd;
int (*set_capture)(struct soc_camera_platform_info *info, int enable);
};
diff --git a/include/media/soc_mediabus.h b/include/media/soc_mediabus.h
index fae4325..73f1e7e 100644
--- a/include/media/soc_mediabus.h
+++ b/include/media/soc_mediabus.h
@@ -82,5 +82,7 @@
s32 soc_mbus_bytes_per_line(u32 width, const struct soc_mbus_pixelfmt *mf);
int soc_mbus_samples_per_pixel(const struct soc_mbus_pixelfmt *mf,
unsigned int *numerator, unsigned int *denominator);
+unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
+ unsigned int flags);
#endif
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index dd9f1e7..4d1c74a 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -122,6 +122,8 @@
int (*vidioc_qbuf) (struct file *file, void *fh, struct v4l2_buffer *b);
int (*vidioc_dqbuf) (struct file *file, void *fh, struct v4l2_buffer *b);
+ int (*vidioc_create_bufs)(struct file *file, void *fh, struct v4l2_create_buffers *b);
+ int (*vidioc_prepare_buf)(struct file *file, void *fh, struct v4l2_buffer *b);
int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
int (*vidioc_g_fbuf) (struct file *file, void *fh,
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 257da1a..f0f3358 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -158,6 +158,7 @@
int (*s_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
int (*try_ext_ctrls)(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls);
int (*querymenu)(struct v4l2_subdev *sd, struct v4l2_querymenu *qm);
+ int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm);
int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm);
long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg);
#ifdef CONFIG_VIDEO_ADV_DEBUG
@@ -534,13 +535,13 @@
void *dev_priv;
void *host_priv;
/* subdev device node */
- struct video_device devnode;
+ struct video_device *devnode;
};
#define media_entity_to_v4l2_subdev(ent) \
container_of(ent, struct v4l2_subdev, entity)
#define vdev_to_v4l2_subdev(vdev) \
- container_of(vdev, struct v4l2_subdev, devnode)
+ video_get_drvdata(vdev)
/*
* Used for storing subdev information per file handle
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index ea55c08..a15d1f1 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -105,6 +105,7 @@
/**
* enum vb2_buffer_state - current video buffer state
* @VB2_BUF_STATE_DEQUEUED: buffer under userspace control
+ * @VB2_BUF_STATE_PREPARED: buffer prepared in videobuf and by the driver
* @VB2_BUF_STATE_QUEUED: buffer queued in videobuf, but not in driver
* @VB2_BUF_STATE_ACTIVE: buffer queued in driver and possibly used
* in a hardware operation
@@ -116,6 +117,7 @@
*/
enum vb2_buffer_state {
VB2_BUF_STATE_DEQUEUED,
+ VB2_BUF_STATE_PREPARED,
VB2_BUF_STATE_QUEUED,
VB2_BUF_STATE_ACTIVE,
VB2_BUF_STATE_DONE,
@@ -167,13 +169,21 @@
/**
* struct vb2_ops - driver-specific callbacks
*
- * @queue_setup: called from a VIDIOC_REQBUFS handler, before
- * memory allocation; driver should return the required
- * number of buffers in num_buffers, the required number
- * of planes per buffer in num_planes; the size of each
- * plane should be set in the sizes[] array and optional
- * per-plane allocator specific context in alloc_ctxs[]
- * array
+ * @queue_setup: called from VIDIOC_REQBUFS and VIDIOC_CREATE_BUFS
+ * handlers before memory allocation, or, if
+ * *num_planes != 0, after the allocation to verify a
+ * smaller number of buffers. Driver should return
+ * the required number of buffers in *num_buffers, the
+ * required number of planes per buffer in *num_planes; the
+ * size of each plane should be set in the sizes[] array
+ * and optional per-plane allocator specific context in the
+ * alloc_ctxs[] array. When called from VIDIOC_REQBUFS,
+ * fmt == NULL, the driver has to use the currently
+ * configured format and *num_buffers is the total number
+ * of buffers, that are being allocated. When called from
+ * VIDIOC_CREATE_BUFS, fmt != NULL and it describes the
+ * target frame format. In this case *num_buffers are being
+ * allocated additionally to q->num_buffers.
* @wait_prepare: release any locks taken while calling vb2 functions;
* it is called before an ioctl needs to wait for a new
* buffer to arrive; required to avoid a deadlock in
@@ -186,11 +196,11 @@
* perform additional buffer-related initialization;
* initialization failure (return != 0) will prevent
* queue setup from completing successfully; optional
- * @buf_prepare: called every time the buffer is queued from userspace;
- * drivers may perform any initialization required before
- * each hardware operation in this callback;
- * if an error is returned, the buffer will not be queued
- * in driver; optional
+ * @buf_prepare: called every time the buffer is queued from userspace
+ * and from the VIDIOC_PREPARE_BUF ioctl; drivers may
+ * perform any initialization required before each hardware
+ * operation in this callback; if an error is returned, the
+ * buffer will not be queued in driver; optional
* @buf_finish: called before every dequeue of the buffer back to
* userspace; drivers may perform any operations required
* before userspace accesses the buffer; optional
@@ -216,9 +226,9 @@
* pre-queued buffers before calling STREAMON
*/
struct vb2_ops {
- int (*queue_setup)(struct vb2_queue *q, unsigned int *num_buffers,
- unsigned int *num_planes, unsigned int sizes[],
- void *alloc_ctxs[]);
+ int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt,
+ unsigned int *num_buffers, unsigned int *num_planes,
+ unsigned int sizes[], void *alloc_ctxs[]);
void (*wait_prepare)(struct vb2_queue *q);
void (*wait_finish)(struct vb2_queue *q);
@@ -298,6 +308,9 @@
int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+
int vb2_queue_init(struct vb2_queue *q);
void vb2_queue_release(struct vb2_queue *q);
@@ -309,6 +322,13 @@
int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma);
+#ifndef CONFIG_MMU
+unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
+ unsigned long addr,
+ unsigned long len,
+ unsigned long pgoff,
+ unsigned long flags);
+#endif
unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
loff_t *ppos, int nonblock);
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 8fa4430..05b08c9 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -425,9 +425,9 @@
const char *(*state_name)(int state);
- int (*state_transition)(struct ip_vs_conn *cp, int direction,
- const struct sk_buff *skb,
- struct ip_vs_proto_data *pd);
+ void (*state_transition)(struct ip_vs_conn *cp, int direction,
+ const struct sk_buff *skb,
+ struct ip_vs_proto_data *pd);
int (*register_app)(struct net *net, struct ip_vs_app *inc);
@@ -1378,7 +1378,7 @@
extern void ip_vs_update_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp,
int outin);
-extern int ip_vs_confirm_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp);
+extern int ip_vs_confirm_conntrack(struct sk_buff *skb);
extern void ip_vs_nfct_expect_related(struct sk_buff *skb, struct nf_conn *ct,
struct ip_vs_conn *cp, u_int8_t proto,
const __be16 port, int from_rs);
@@ -1396,8 +1396,7 @@
{
}
-static inline int ip_vs_confirm_conntrack(struct sk_buff *skb,
- struct ip_vs_conn *cp)
+static inline int ip_vs_confirm_conntrack(struct sk_buff *skb)
{
return NF_ACCEPT;
}
diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h
index 7ca6bdd..2f8fb77 100644
--- a/include/net/netfilter/nf_conntrack_tuple.h
+++ b/include/net/netfilter/nf_conntrack_tuple.h
@@ -12,6 +12,7 @@
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/nf_conntrack_tuple_common.h>
+#include <linux/netfilter_ipv4/nf_nat.h>
#include <linux/list_nulls.h>
/* A `tuple' is a structure containing the information to uniquely
@@ -24,32 +25,6 @@
#define NF_CT_TUPLE_L3SIZE ARRAY_SIZE(((union nf_inet_addr *)NULL)->all)
-/* The protocol-specific manipulable parts of the tuple: always in
- network order! */
-union nf_conntrack_man_proto {
- /* Add other protocols here. */
- __be16 all;
-
- struct {
- __be16 port;
- } tcp;
- struct {
- __be16 port;
- } udp;
- struct {
- __be16 id;
- } icmp;
- struct {
- __be16 port;
- } dccp;
- struct {
- __be16 port;
- } sctp;
- struct {
- __be16 key; /* GRE key is 32bit, PPtP only uses 16bit */
- } gre;
-};
-
/* The manipulable part of the tuple. */
struct nf_conntrack_man {
union nf_inet_addr u3;
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
index 0346b00..b8872df 100644
--- a/include/net/netfilter/nf_nat.h
+++ b/include/net/netfilter/nf_nat.h
@@ -1,6 +1,7 @@
#ifndef _NF_NAT_H
#define _NF_NAT_H
#include <linux/netfilter_ipv4.h>
+#include <linux/netfilter_ipv4/nf_nat.h>
#include <net/netfilter/nf_conntrack_tuple.h>
#define NF_NAT_MAPPING_TYPE_MAX_NAMELEN 16
@@ -14,11 +15,6 @@
#define HOOK2MANIP(hooknum) ((hooknum) != NF_INET_POST_ROUTING && \
(hooknum) != NF_INET_LOCAL_IN)
-#define IP_NAT_RANGE_MAP_IPS 1
-#define IP_NAT_RANGE_PROTO_SPECIFIED 2
-#define IP_NAT_RANGE_PROTO_RANDOM 4
-#define IP_NAT_RANGE_PERSISTENT 8
-
/* NAT sequence number modifications */
struct nf_nat_seq {
/* position of the last TCP sequence number modification (if any) */
@@ -28,26 +24,6 @@
int16_t offset_before, offset_after;
};
-/* Single range specification. */
-struct nf_nat_range {
- /* Set to OR of flags above. */
- unsigned int flags;
-
- /* Inclusive: network order. */
- __be32 min_ip, max_ip;
-
- /* Inclusive: network order */
- union nf_conntrack_man_proto min, max;
-};
-
-/* For backwards compat: don't use in modern code. */
-struct nf_nat_multi_range_compat {
- unsigned int rangesize; /* Must be 1. */
-
- /* hangs off end. */
- struct nf_nat_range range[1];
-};
-
#include <linux/list.h>
#include <linux/netfilter/nf_conntrack_pptp.h>
#include <net/netfilter/nf_conntrack_extend.h>
diff --git a/include/net/tcp.h b/include/net/tcp.h
index e147f42..bb18c4d 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1403,11 +1403,13 @@
TCP_SEQ_STATE_TIME_WAIT,
};
+int tcp_seq_open(struct inode *inode, struct file *file);
+
struct tcp_seq_afinfo {
- char *name;
- sa_family_t family;
- struct file_operations seq_fops;
- struct seq_operations seq_ops;
+ char *name;
+ sa_family_t family;
+ const struct file_operations *seq_fops;
+ struct seq_operations seq_ops;
};
struct tcp_iter_state {
diff --git a/include/net/udp.h b/include/net/udp.h
index 67ea6fc..3b285f4 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -230,12 +230,14 @@
#endif
/* /proc */
+int udp_seq_open(struct inode *inode, struct file *file);
+
struct udp_seq_afinfo {
- char *name;
- sa_family_t family;
- struct udp_table *udp_table;
- struct file_operations seq_fops;
- struct seq_operations seq_ops;
+ char *name;
+ sa_family_t family;
+ struct udp_table *udp_table;
+ const struct file_operations *seq_fops;
+ struct seq_operations seq_ops;
};
struct udp_iter_state {
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index b50a547..748ff7c 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -9,9 +9,12 @@
struct ext4_allocation_context;
struct ext4_allocation_request;
+struct ext4_extent;
struct ext4_prealloc_space;
struct ext4_inode_info;
struct mpage_da_data;
+struct ext4_map_blocks;
+struct ext4_extent;
#define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
@@ -1032,9 +1035,9 @@
);
TRACE_EVENT(ext4_da_update_reserve_space,
- TP_PROTO(struct inode *inode, int used_blocks),
+ TP_PROTO(struct inode *inode, int used_blocks, int quota_claim),
- TP_ARGS(inode, used_blocks),
+ TP_ARGS(inode, used_blocks, quota_claim),
TP_STRUCT__entry(
__field( dev_t, dev )
@@ -1045,6 +1048,7 @@
__field( int, reserved_data_blocks )
__field( int, reserved_meta_blocks )
__field( int, allocated_meta_blocks )
+ __field( int, quota_claim )
),
TP_fast_assign(
@@ -1053,19 +1057,24 @@
__entry->mode = inode->i_mode;
__entry->i_blocks = inode->i_blocks;
__entry->used_blocks = used_blocks;
- __entry->reserved_data_blocks = EXT4_I(inode)->i_reserved_data_blocks;
- __entry->reserved_meta_blocks = EXT4_I(inode)->i_reserved_meta_blocks;
- __entry->allocated_meta_blocks = EXT4_I(inode)->i_allocated_meta_blocks;
+ __entry->reserved_data_blocks =
+ EXT4_I(inode)->i_reserved_data_blocks;
+ __entry->reserved_meta_blocks =
+ EXT4_I(inode)->i_reserved_meta_blocks;
+ __entry->allocated_meta_blocks =
+ EXT4_I(inode)->i_allocated_meta_blocks;
+ __entry->quota_claim = quota_claim;
),
TP_printk("dev %d,%d ino %lu mode 0%o i_blocks %llu used_blocks %d "
"reserved_data_blocks %d reserved_meta_blocks %d "
- "allocated_meta_blocks %d",
+ "allocated_meta_blocks %d quota_claim %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
(unsigned long) __entry->ino,
__entry->mode, __entry->i_blocks,
__entry->used_blocks, __entry->reserved_data_blocks,
- __entry->reserved_meta_blocks, __entry->allocated_meta_blocks)
+ __entry->reserved_meta_blocks, __entry->allocated_meta_blocks,
+ __entry->quota_claim)
);
TRACE_EVENT(ext4_da_reserve_space,
@@ -1386,6 +1395,87 @@
TP_ARGS(inode)
);
+/* 'ux' is the uninitialized extent. */
+TRACE_EVENT(ext4_ext_convert_to_initialized_enter,
+ TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+ struct ext4_extent *ux),
+
+ TP_ARGS(inode, map, ux),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, m_lblk )
+ __field( unsigned, m_len )
+ __field( ext4_lblk_t, u_lblk )
+ __field( unsigned, u_len )
+ __field( ext4_fsblk_t, u_pblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->m_lblk = map->m_lblk;
+ __entry->m_len = map->m_len;
+ __entry->u_lblk = le32_to_cpu(ux->ee_block);
+ __entry->u_len = ext4_ext_get_actual_len(ux);
+ __entry->u_pblk = ext4_ext_pblock(ux);
+ ),
+
+ TP_printk("dev %d,%d ino %lu m_lblk %u m_len %u u_lblk %u u_len %u "
+ "u_pblk %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ __entry->m_lblk, __entry->m_len,
+ __entry->u_lblk, __entry->u_len, __entry->u_pblk)
+);
+
+/*
+ * 'ux' is the uninitialized extent.
+ * 'ix' is the initialized extent to which blocks are transferred.
+ */
+TRACE_EVENT(ext4_ext_convert_to_initialized_fastpath,
+ TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+ struct ext4_extent *ux, struct ext4_extent *ix),
+
+ TP_ARGS(inode, map, ux, ix),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, m_lblk )
+ __field( unsigned, m_len )
+ __field( ext4_lblk_t, u_lblk )
+ __field( unsigned, u_len )
+ __field( ext4_fsblk_t, u_pblk )
+ __field( ext4_lblk_t, i_lblk )
+ __field( unsigned, i_len )
+ __field( ext4_fsblk_t, i_pblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->m_lblk = map->m_lblk;
+ __entry->m_len = map->m_len;
+ __entry->u_lblk = le32_to_cpu(ux->ee_block);
+ __entry->u_len = ext4_ext_get_actual_len(ux);
+ __entry->u_pblk = ext4_ext_pblock(ux);
+ __entry->i_lblk = le32_to_cpu(ix->ee_block);
+ __entry->i_len = ext4_ext_get_actual_len(ix);
+ __entry->i_pblk = ext4_ext_pblock(ix);
+ ),
+
+ TP_printk("dev %d,%d ino %lu m_lblk %u m_len %u "
+ "u_lblk %u u_len %u u_pblk %llu "
+ "i_lblk %u i_len %u i_pblk %llu ",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ __entry->m_lblk, __entry->m_len,
+ __entry->u_lblk, __entry->u_len, __entry->u_pblk,
+ __entry->i_lblk, __entry->i_len, __entry->i_pblk)
+);
+
DECLARE_EVENT_CLASS(ext4__map_blocks_enter,
TP_PROTO(struct inode *inode, ext4_lblk_t lblk,
unsigned int len, unsigned int flags),
@@ -1589,6 +1679,382 @@
TP_ARGS(sb, group, start, len)
);
+TRACE_EVENT(ext4_ext_handle_uninitialized_extents,
+ TP_PROTO(struct inode *inode, struct ext4_map_blocks *map,
+ unsigned int allocated, ext4_fsblk_t newblock),
+
+ TP_ARGS(inode, map, allocated, newblock),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( ext4_fsblk_t, pblk )
+ __field( unsigned int, len )
+ __field( int, flags )
+ __field( unsigned int, allocated )
+ __field( ext4_fsblk_t, newblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = map->m_lblk;
+ __entry->pblk = map->m_pblk;
+ __entry->len = map->m_len;
+ __entry->flags = map->m_flags;
+ __entry->allocated = allocated;
+ __entry->newblk = newblock;
+ ),
+
+ TP_printk("dev %d,%d ino %lu m_lblk %u m_pblk %llu m_len %u flags %d"
+ "allocated %d newblock %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk, (unsigned long long) __entry->pblk,
+ __entry->len, __entry->flags,
+ (unsigned int) __entry->allocated,
+ (unsigned long long) __entry->newblk)
+);
+
+TRACE_EVENT(ext4_get_implied_cluster_alloc_exit,
+ TP_PROTO(struct super_block *sb, struct ext4_map_blocks *map, int ret),
+
+ TP_ARGS(sb, map, ret),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( ext4_fsblk_t, pblk )
+ __field( unsigned int, len )
+ __field( unsigned int, flags )
+ __field( int, ret )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = sb->s_dev;
+ __entry->lblk = map->m_lblk;
+ __entry->pblk = map->m_pblk;
+ __entry->len = map->m_len;
+ __entry->flags = map->m_flags;
+ __entry->ret = ret;
+ ),
+
+ TP_printk("dev %d,%d m_lblk %u m_pblk %llu m_len %u m_flags %u ret %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ __entry->lblk, (unsigned long long) __entry->pblk,
+ __entry->len, __entry->flags, __entry->ret)
+);
+
+TRACE_EVENT(ext4_ext_put_in_cache,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, unsigned int len,
+ ext4_fsblk_t start),
+
+ TP_ARGS(inode, lblk, len, start),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( unsigned int, len )
+ __field( ext4_fsblk_t, start )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->len = len;
+ __entry->start = start;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u len %u start %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ __entry->len,
+ (unsigned long long) __entry->start)
+);
+
+TRACE_EVENT(ext4_ext_in_cache,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, int ret),
+
+ TP_ARGS(inode, lblk, ret),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( int, ret )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->ret = ret;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u ret %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ __entry->ret)
+
+);
+
+TRACE_EVENT(ext4_find_delalloc_range,
+ TP_PROTO(struct inode *inode, ext4_lblk_t from, ext4_lblk_t to,
+ int reverse, int found, ext4_lblk_t found_blk),
+
+ TP_ARGS(inode, from, to, reverse, found, found_blk),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, from )
+ __field( ext4_lblk_t, to )
+ __field( int, reverse )
+ __field( int, found )
+ __field( ext4_lblk_t, found_blk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->from = from;
+ __entry->to = to;
+ __entry->reverse = reverse;
+ __entry->found = found;
+ __entry->found_blk = found_blk;
+ ),
+
+ TP_printk("dev %d,%d ino %lu from %u to %u reverse %d found %d "
+ "(blk = %u)",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->from, (unsigned) __entry->to,
+ __entry->reverse, __entry->found,
+ (unsigned) __entry->found_blk)
+);
+
+TRACE_EVENT(ext4_get_reserved_cluster_alloc,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, unsigned int len),
+
+ TP_ARGS(inode, lblk, len),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( unsigned int, len )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->len = len;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u len %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ __entry->len)
+);
+
+TRACE_EVENT(ext4_ext_show_extent,
+ TP_PROTO(struct inode *inode, ext4_lblk_t lblk, ext4_fsblk_t pblk,
+ unsigned short len),
+
+ TP_ARGS(inode, lblk, pblk, len),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, lblk )
+ __field( ext4_fsblk_t, pblk )
+ __field( unsigned short, len )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->lblk = lblk;
+ __entry->pblk = pblk;
+ __entry->len = len;
+ ),
+
+ TP_printk("dev %d,%d ino %lu lblk %u pblk %llu len %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->lblk,
+ (unsigned long long) __entry->pblk,
+ (unsigned short) __entry->len)
+);
+
+TRACE_EVENT(ext4_remove_blocks,
+ TP_PROTO(struct inode *inode, struct ext4_extent *ex,
+ ext4_lblk_t from, ext4_fsblk_t to,
+ ext4_fsblk_t partial_cluster),
+
+ TP_ARGS(inode, ex, from, to, partial_cluster),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, ee_lblk )
+ __field( ext4_fsblk_t, ee_pblk )
+ __field( unsigned short, ee_len )
+ __field( ext4_lblk_t, from )
+ __field( ext4_lblk_t, to )
+ __field( ext4_fsblk_t, partial )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ee_lblk = cpu_to_le32(ex->ee_block);
+ __entry->ee_pblk = ext4_ext_pblock(ex);
+ __entry->ee_len = ext4_ext_get_actual_len(ex);
+ __entry->from = from;
+ __entry->to = to;
+ __entry->partial = partial_cluster;
+ ),
+
+ TP_printk("dev %d,%d ino %lu extent [%u(%llu), %u]"
+ "from %u to %u partial_cluster %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->ee_lblk,
+ (unsigned long long) __entry->ee_pblk,
+ (unsigned short) __entry->ee_len,
+ (unsigned) __entry->from,
+ (unsigned) __entry->to,
+ (unsigned) __entry->partial)
+);
+
+TRACE_EVENT(ext4_ext_rm_leaf,
+ TP_PROTO(struct inode *inode, ext4_lblk_t start,
+ struct ext4_extent *ex, ext4_fsblk_t partial_cluster),
+
+ TP_ARGS(inode, start, ex, partial_cluster),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, start )
+ __field( ext4_lblk_t, ee_lblk )
+ __field( ext4_fsblk_t, ee_pblk )
+ __field( short, ee_len )
+ __field( ext4_fsblk_t, partial )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->start = start;
+ __entry->ee_lblk = le32_to_cpu(ex->ee_block);
+ __entry->ee_pblk = ext4_ext_pblock(ex);
+ __entry->ee_len = ext4_ext_get_actual_len(ex);
+ __entry->partial = partial_cluster;
+ ),
+
+ TP_printk("dev %d,%d ino %lu start_lblk %u last_extent [%u(%llu), %u]"
+ "partial_cluster %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->start,
+ (unsigned) __entry->ee_lblk,
+ (unsigned long long) __entry->ee_pblk,
+ (unsigned short) __entry->ee_len,
+ (unsigned) __entry->partial)
+);
+
+TRACE_EVENT(ext4_ext_rm_idx,
+ TP_PROTO(struct inode *inode, ext4_fsblk_t pblk),
+
+ TP_ARGS(inode, pblk),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_fsblk_t, pblk )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->pblk = pblk;
+ ),
+
+ TP_printk("dev %d,%d ino %lu index_pblk %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned long long) __entry->pblk)
+);
+
+TRACE_EVENT(ext4_ext_remove_space,
+ TP_PROTO(struct inode *inode, ext4_lblk_t start, int depth),
+
+ TP_ARGS(inode, start, depth),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, start )
+ __field( int, depth )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->start = start;
+ __entry->depth = depth;
+ ),
+
+ TP_printk("dev %d,%d ino %lu since %u depth %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->start,
+ __entry->depth)
+);
+
+TRACE_EVENT(ext4_ext_remove_space_done,
+ TP_PROTO(struct inode *inode, ext4_lblk_t start, int depth,
+ ext4_lblk_t partial, unsigned short eh_entries),
+
+ TP_ARGS(inode, start, depth, partial, eh_entries),
+
+ TP_STRUCT__entry(
+ __field( ino_t, ino )
+ __field( dev_t, dev )
+ __field( ext4_lblk_t, start )
+ __field( int, depth )
+ __field( ext4_lblk_t, partial )
+ __field( unsigned short, eh_entries )
+ ),
+
+ TP_fast_assign(
+ __entry->ino = inode->i_ino;
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->start = start;
+ __entry->depth = depth;
+ __entry->partial = partial;
+ __entry->eh_entries = eh_entries;
+ ),
+
+ TP_printk("dev %d,%d ino %lu since %u depth %d partial %u "
+ "remaining_entries %u",
+ MAJOR(__entry->dev), MINOR(__entry->dev),
+ (unsigned long) __entry->ino,
+ (unsigned) __entry->start,
+ __entry->depth,
+ (unsigned) __entry->partial,
+ (unsigned short) __entry->eh_entries)
+);
+
#endif /* _TRACE_EXT4_H */
/* This part must be outside protection */
diff --git a/init/Kconfig b/init/Kconfig
index 31ba0fd..43298f9 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -947,7 +947,7 @@
config SYSCTL_SYSCALL
bool "Sysctl syscall support" if EXPERT
depends on PROC_SYSCTL
- default y
+ default n
select SYSCTL
---help---
sys_sysctl uses binary paths that have been found challenging
@@ -959,7 +959,7 @@
trying to save some space it is probably safe to disable this,
making your kernel marginally smaller.
- If unsure say Y here.
+ If unsure say N here.
config KALLSYMS
bool "Load all symbols for debugging/ksymoops" if EXPERT
diff --git a/init/do_mounts.c b/init/do_mounts.c
index c0851a8..0f6e1d9 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -28,7 +28,7 @@
int root_mountflags = MS_RDONLY | MS_SILENT;
static char * __initdata root_device_name;
static char __initdata saved_root_name[64];
-static int __initdata root_wait;
+static int root_wait;
dev_t ROOT_DEV;
@@ -85,12 +85,15 @@
/**
* devt_from_partuuid - looks up the dev_t of a partition by its UUID
- * @uuid: 36 byte char array containing a hex ascii UUID
+ * @uuid: min 36 byte char array containing a hex ascii UUID
*
* The function will return the first partition which contains a matching
* UUID value in its partition_meta_info struct. This does not search
* by filesystem UUIDs.
*
+ * If @uuid is followed by a "/PARTNROFF=%d", then the number will be
+ * extracted and used as an offset from the partition identified by the UUID.
+ *
* Returns the matching dev_t on success or 0 on failure.
*/
static dev_t devt_from_partuuid(char *uuid_str)
@@ -98,6 +101,28 @@
dev_t res = 0;
struct device *dev = NULL;
u8 uuid[16];
+ struct gendisk *disk;
+ struct hd_struct *part;
+ int offset = 0;
+
+ if (strlen(uuid_str) < 36)
+ goto done;
+
+ /* Check for optional partition number offset attributes. */
+ if (uuid_str[36]) {
+ char c = 0;
+ /* Explicitly fail on poor PARTUUID syntax. */
+ if (sscanf(&uuid_str[36],
+ "/PARTNROFF=%d%c", &offset, &c) != 1) {
+ printk(KERN_ERR "VFS: PARTUUID= is invalid.\n"
+ "Expected PARTUUID=<valid-uuid-id>[/PARTNROFF=%%d]\n");
+ if (root_wait)
+ printk(KERN_ERR
+ "Disabling rootwait; root= is invalid.\n");
+ root_wait = 0;
+ goto done;
+ }
+ }
/* Pack the requested UUID in the expected format. */
part_pack_uuid(uuid_str, uuid);
@@ -107,8 +132,21 @@
goto done;
res = dev->devt;
- put_device(dev);
+ /* Attempt to find the partition by offset. */
+ if (!offset)
+ goto no_offset;
+
+ res = 0;
+ disk = part_to_disk(dev_to_part(dev));
+ part = disk_get_part(disk, dev_to_part(dev)->partno + offset);
+ if (part) {
+ res = part_devt(part);
+ put_device(part_to_dev(part));
+ }
+
+no_offset:
+ put_device(dev);
done:
return res;
}
@@ -126,6 +164,8 @@
* used when disk name of partitioned disk ends on a digit.
* 6) PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF representing the
* unique id of a partition if the partition table provides it.
+ * 7) PARTUUID=<UUID>/PARTNROFF=<int> to select a partition in relation to
+ * a partition with a known unique id.
*
* If name doesn't have fall into the categories above, we return (0,0).
* block_class is used to check if something is a disk name. If the disk
@@ -143,8 +183,6 @@
#ifdef CONFIG_BLOCK
if (strncmp(name, "PARTUUID=", 9) == 0) {
name += 9;
- if (strlen(name) != 36)
- goto fail;
res = devt_from_partuuid(name);
if (!res)
goto fail;
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index fe9acb0..887629e 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -120,6 +120,20 @@
}
/*
+ * Read 512 bytes further to check if cramfs is padded
+ */
+ sys_lseek(fd, start_block * BLOCK_SIZE + 0x200, 0);
+ sys_read(fd, buf, size);
+
+ if (cramfsb->magic == CRAMFS_MAGIC) {
+ printk(KERN_NOTICE
+ "RAMDISK: cramfs filesystem found at block %d\n",
+ start_block);
+ nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS;
+ goto done;
+ }
+
+ /*
* Read block 1 to test for minix and ext2 superblock
*/
sys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0);
diff --git a/ipc/sem.c b/ipc/sem.c
index c8e00f8..5215a81 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -90,6 +90,52 @@
#include <asm/uaccess.h>
#include "util.h"
+/* One semaphore structure for each semaphore in the system. */
+struct sem {
+ int semval; /* current value */
+ int sempid; /* pid of last operation */
+ struct list_head sem_pending; /* pending single-sop operations */
+};
+
+/* One queue for each sleeping process in the system. */
+struct sem_queue {
+ struct list_head simple_list; /* queue of pending operations */
+ struct list_head list; /* queue of pending operations */
+ struct task_struct *sleeper; /* this process */
+ struct sem_undo *undo; /* undo structure */
+ int pid; /* process id of requesting process */
+ int status; /* completion status of operation */
+ struct sembuf *sops; /* array of pending operations */
+ int nsops; /* number of operations */
+ int alter; /* does *sops alter the array? */
+};
+
+/* Each task has a list of undo requests. They are executed automatically
+ * when the process exits.
+ */
+struct sem_undo {
+ struct list_head list_proc; /* per-process list: *
+ * all undos from one process
+ * rcu protected */
+ struct rcu_head rcu; /* rcu struct for sem_undo */
+ struct sem_undo_list *ulp; /* back ptr to sem_undo_list */
+ struct list_head list_id; /* per semaphore array list:
+ * all undos for one array */
+ int semid; /* semaphore set identifier */
+ short *semadj; /* array of adjustments */
+ /* one per semaphore */
+};
+
+/* sem_undo_list controls shared access to the list of sem_undo structures
+ * that may be shared among all a CLONE_SYSVSEM task group.
+ */
+struct sem_undo_list {
+ atomic_t refcnt;
+ spinlock_t lock;
+ struct list_head list_proc;
+};
+
+
#define sem_ids(ns) ((ns)->ids[IPC_SEM_IDS])
#define sem_unlock(sma) ipc_unlock(&(sma)->sem_perm)
@@ -1426,6 +1472,8 @@
queue.status = -EINTR;
queue.sleeper = current;
+
+sleep_again:
current->state = TASK_INTERRUPTIBLE;
sem_unlock(sma);
@@ -1460,7 +1508,6 @@
* Array removed? If yes, leave without sem_unlock().
*/
if (IS_ERR(sma)) {
- error = -EIDRM;
goto out_free;
}
@@ -1479,6 +1526,13 @@
*/
if (timeout && jiffies_left == 0)
error = -EAGAIN;
+
+ /*
+ * If the wakeup was spurious, just retry
+ */
+ if (error == -EINTR && !signal_pending(current))
+ goto sleep_again;
+
unlink_queue(sma, &queue);
out_unlock_free:
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 453100a..d9d5648 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2027,7 +2027,7 @@
goto out_free_group_list;
/* prevent changes to the threadgroup list while we take a snapshot. */
- rcu_read_lock();
+ read_lock(&tasklist_lock);
if (!thread_group_leader(leader)) {
/*
* a race with de_thread from another thread's exec() may strip
@@ -2036,7 +2036,7 @@
* throw this task away and try again (from cgroup_procs_write);
* this is "double-double-toil-and-trouble-check locking".
*/
- rcu_read_unlock();
+ read_unlock(&tasklist_lock);
retval = -EAGAIN;
goto out_free_group_list;
}
@@ -2057,7 +2057,7 @@
} while_each_thread(leader, tsk);
/* remember the number of threads in the array for later. */
group_size = i;
- rcu_read_unlock();
+ read_unlock(&tasklist_lock);
/*
* step 1: check that we can legitimately attach to the cgroup.
@@ -2135,14 +2135,17 @@
oldcgrp = task_cgroup_from_root(tsk, root);
if (cgrp == oldcgrp)
continue;
- /* attach each task to each subsystem */
- for_each_subsys(root, ss) {
- if (ss->attach_task)
- ss->attach_task(cgrp, tsk);
- }
/* if the thread is PF_EXITING, it can just get skipped. */
retval = cgroup_task_migrate(cgrp, oldcgrp, tsk, true);
- BUG_ON(retval != 0 && retval != -ESRCH);
+ if (retval == 0) {
+ /* attach each task to each subsystem */
+ for_each_subsys(root, ss) {
+ if (ss->attach_task)
+ ss->attach_task(cgrp, tsk);
+ }
+ } else {
+ BUG_ON(retval != -ESRCH);
+ }
}
/* nothing is sensitive to fork() after this point. */
@@ -4880,9 +4883,9 @@
rcu_assign_pointer(id->css, NULL);
rcu_assign_pointer(css->id, NULL);
- spin_lock(&ss->id_lock);
+ write_lock(&ss->id_lock);
idr_remove(&ss->idr, id->id);
- spin_unlock(&ss->id_lock);
+ write_unlock(&ss->id_lock);
kfree_rcu(id, rcu_head);
}
EXPORT_SYMBOL_GPL(free_css_id);
@@ -4908,10 +4911,10 @@
error = -ENOMEM;
goto err_out;
}
- spin_lock(&ss->id_lock);
+ write_lock(&ss->id_lock);
/* Don't use 0. allocates an ID of 1-65535 */
error = idr_get_new_above(&ss->idr, newid, 1, &myid);
- spin_unlock(&ss->id_lock);
+ write_unlock(&ss->id_lock);
/* Returns error when there are no free spaces for new ID.*/
if (error) {
@@ -4926,9 +4929,9 @@
return newid;
remove_idr:
error = -ENOSPC;
- spin_lock(&ss->id_lock);
+ write_lock(&ss->id_lock);
idr_remove(&ss->idr, myid);
- spin_unlock(&ss->id_lock);
+ write_unlock(&ss->id_lock);
err_out:
kfree(newid);
return ERR_PTR(error);
@@ -4940,7 +4943,7 @@
{
struct css_id *newid;
- spin_lock_init(&ss->id_lock);
+ rwlock_init(&ss->id_lock);
idr_init(&ss->idr);
newid = get_new_cssid(ss, 0);
@@ -5035,9 +5038,9 @@
* scan next entry from bitmap(tree), tmpid is updated after
* idr_get_next().
*/
- spin_lock(&ss->id_lock);
+ read_lock(&ss->id_lock);
tmp = idr_get_next(&ss->idr, &tmpid);
- spin_unlock(&ss->id_lock);
+ read_unlock(&ss->id_lock);
if (!tmp)
break;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 10131fd..ed0ff44 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -949,6 +949,8 @@
static void cpuset_change_task_nodemask(struct task_struct *tsk,
nodemask_t *newmems)
{
+ bool masks_disjoint = !nodes_intersects(*newmems, tsk->mems_allowed);
+
repeat:
/*
* Allow tasks that have access to memory reserves because they have
@@ -963,7 +965,6 @@
nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems);
mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1);
-
/*
* ensure checking ->mems_allowed_change_disable after setting all new
* allowed nodes.
@@ -980,9 +981,11 @@
/*
* Allocation of memory is very fast, we needn't sleep when waiting
- * for the read-side.
+ * for the read-side. No wait is necessary, however, if at least one
+ * node remains unchanged.
*/
- while (ACCESS_ONCE(tsk->mems_allowed_change_disable)) {
+ while (masks_disjoint &&
+ ACCESS_ONCE(tsk->mems_allowed_change_disable)) {
task_unlock(tsk);
if (!task_curr(tsk))
yield();
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 12a0287..e1253fa 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -29,7 +29,6 @@
#include <linux/hardirq.h>
#include <linux/rculist.h>
#include <linux/uaccess.h>
-#include <linux/suspend.h>
#include <linux/syscalls.h>
#include <linux/anon_inodes.h>
#include <linux/kernel_stat.h>
@@ -6853,7 +6852,7 @@
struct swevent_htable *swhash = &per_cpu(swevent_htable, cpu);
mutex_lock(&swhash->hlist_mutex);
- if (swhash->hlist_refcount > 0 && !swhash->swevent_hlist) {
+ if (swhash->hlist_refcount > 0) {
struct swevent_hlist *hlist;
hlist = kzalloc_node(sizeof(*hlist), GFP_KERNEL, cpu_to_node(cpu));
@@ -6942,14 +6941,7 @@
{
unsigned int cpu = (long)hcpu;
- /*
- * Ignore suspend/resume action, the perf_pm_notifier will
- * take care of that.
- */
- if (action & CPU_TASKS_FROZEN)
- return NOTIFY_OK;
-
- switch (action) {
+ switch (action & ~CPU_TASKS_FROZEN) {
case CPU_UP_PREPARE:
case CPU_DOWN_FAILED:
@@ -6968,90 +6960,6 @@
return NOTIFY_OK;
}
-static void perf_pm_resume_cpu(void *unused)
-{
- struct perf_cpu_context *cpuctx;
- struct perf_event_context *ctx;
- struct pmu *pmu;
- int idx;
-
- idx = srcu_read_lock(&pmus_srcu);
- list_for_each_entry_rcu(pmu, &pmus, entry) {
- cpuctx = this_cpu_ptr(pmu->pmu_cpu_context);
- ctx = cpuctx->task_ctx;
-
- perf_ctx_lock(cpuctx, ctx);
- perf_pmu_disable(cpuctx->ctx.pmu);
-
- cpu_ctx_sched_out(cpuctx, EVENT_ALL);
- if (ctx)
- ctx_sched_out(ctx, cpuctx, EVENT_ALL);
-
- perf_pmu_enable(cpuctx->ctx.pmu);
- perf_ctx_unlock(cpuctx, ctx);
- }
- srcu_read_unlock(&pmus_srcu, idx);
-}
-
-static void perf_pm_suspend_cpu(void *unused)
-{
- struct perf_cpu_context *cpuctx;
- struct perf_event_context *ctx;
- struct pmu *pmu;
- int idx;
-
- idx = srcu_read_lock(&pmus_srcu);
- list_for_each_entry_rcu(pmu, &pmus, entry) {
- cpuctx = this_cpu_ptr(pmu->pmu_cpu_context);
- ctx = cpuctx->task_ctx;
-
- perf_ctx_lock(cpuctx, ctx);
- perf_pmu_disable(cpuctx->ctx.pmu);
-
- perf_event_sched_in(cpuctx, ctx, current);
-
- perf_pmu_enable(cpuctx->ctx.pmu);
- perf_ctx_unlock(cpuctx, ctx);
- }
- srcu_read_unlock(&pmus_srcu, idx);
-}
-
-static int perf_resume(void)
-{
- get_online_cpus();
- smp_call_function(perf_pm_resume_cpu, NULL, 1);
- put_online_cpus();
-
- return NOTIFY_OK;
-}
-
-static int perf_suspend(void)
-{
- get_online_cpus();
- smp_call_function(perf_pm_suspend_cpu, NULL, 1);
- put_online_cpus();
-
- return NOTIFY_OK;
-}
-
-static int perf_pm(struct notifier_block *self, unsigned long action, void *ptr)
-{
- switch (action) {
- case PM_POST_HIBERNATION:
- case PM_POST_SUSPEND:
- return perf_resume();
- case PM_HIBERNATION_PREPARE:
- case PM_SUSPEND_PREPARE:
- return perf_suspend();
- default:
- return NOTIFY_DONE;
- }
-}
-
-static struct notifier_block perf_pm_notifier = {
- .notifier_call = perf_pm,
-};
-
void __init perf_event_init(void)
{
int ret;
@@ -7066,7 +6974,6 @@
perf_tp_register();
perf_cpu_notifier(perf_cpu_notify);
register_reboot_notifier(&perf_reboot_notifier);
- register_pm_notifier(&perf_pm_notifier);
ret = init_hw_breakpoint();
WARN(ret, "hw_breakpoint initialization failed with: %d", ret);
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index b57a377..200ce83 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -20,15 +20,15 @@
void irq_domain_add(struct irq_domain *domain)
{
struct irq_data *d;
- int hwirq;
+ int hwirq, irq;
/*
* This assumes that the irq_domain owner has already allocated
* the irq_descs. This block will be removed when support for dynamic
* allocation of irq_descs is added to irq_domain.
*/
- for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
- d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
+ irq_domain_for_each_irq(domain, hwirq, irq) {
+ d = irq_get_irq_data(irq);
if (!d) {
WARN(1, "error: assigning domain to non existant irq_desc");
return;
@@ -54,15 +54,15 @@
void irq_domain_del(struct irq_domain *domain)
{
struct irq_data *d;
- int hwirq;
+ int hwirq, irq;
mutex_lock(&irq_domain_mutex);
list_del(&domain->list);
mutex_unlock(&irq_domain_mutex);
/* Clear the irq_domain assignments */
- for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
- d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
+ irq_domain_for_each_irq(domain, hwirq, irq) {
+ d = irq_get_irq_data(irq);
d->domain = NULL;
}
}
diff --git a/kernel/sys.c b/kernel/sys.c
index 5845950..d06c091 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1286,6 +1286,7 @@
memset(u->nodename + len, 0, sizeof(u->nodename) - len);
errno = 0;
}
+ uts_proc_notify(UTS_PROC_HOSTNAME);
up_write(&uts_sem);
return errno;
}
@@ -1336,6 +1337,7 @@
memset(u->domainname + len, 0, sizeof(u->domainname) - len);
errno = 0;
}
+ uts_proc_notify(UTS_PROC_DOMAINNAME);
up_write(&uts_sem);
return errno;
}
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index a2cd77e..3b0d48e 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -13,6 +13,7 @@
#include <linux/uts.h>
#include <linux/utsname.h>
#include <linux/sysctl.h>
+#include <linux/wait.h>
static void *get_uts(ctl_table *table, int write)
{
@@ -51,12 +52,19 @@
uts_table.data = get_uts(table, write);
r = proc_dostring(&uts_table,write,buffer,lenp, ppos);
put_uts(table, write, uts_table.data);
+
+ if (write)
+ proc_sys_poll_notify(table->poll);
+
return r;
}
#else
#define proc_do_uts_string NULL
#endif
+static DEFINE_CTL_TABLE_POLL(hostname_poll);
+static DEFINE_CTL_TABLE_POLL(domainname_poll);
+
static struct ctl_table uts_kern_table[] = {
{
.procname = "ostype",
@@ -85,6 +93,7 @@
.maxlen = sizeof(init_uts_ns.name.nodename),
.mode = 0644,
.proc_handler = proc_do_uts_string,
+ .poll = &hostname_poll,
},
{
.procname = "domainname",
@@ -92,6 +101,7 @@
.maxlen = sizeof(init_uts_ns.name.domainname),
.mode = 0644,
.proc_handler = proc_do_uts_string,
+ .poll = &domainname_poll,
},
{}
};
@@ -105,6 +115,19 @@
{}
};
+#ifdef CONFIG_PROC_SYSCTL
+/*
+ * Notify userspace about a change in a certain entry of uts_kern_table,
+ * identified by the parameter proc.
+ */
+void uts_proc_notify(enum uts_proc proc)
+{
+ struct ctl_table *table = &uts_kern_table[proc];
+
+ proc_sys_poll_notify(table->poll);
+}
+#endif
+
static int __init utsname_sysctl_init(void)
{
register_sysctl_table(uts_root_table);
diff --git a/lib/idr.c b/lib/idr.c
index bbf211a..ed055b2 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -944,6 +944,7 @@
{
int ret, id;
unsigned int max;
+ unsigned long flags;
BUG_ON((int)start < 0);
BUG_ON((int)end < 0);
@@ -959,7 +960,7 @@
if (!ida_pre_get(ida, gfp_mask))
return -ENOMEM;
- spin_lock(&simple_ida_lock);
+ spin_lock_irqsave(&simple_ida_lock, flags);
ret = ida_get_new_above(ida, start, &id);
if (!ret) {
if (id > max) {
@@ -969,7 +970,7 @@
ret = id;
}
}
- spin_unlock(&simple_ida_lock);
+ spin_unlock_irqrestore(&simple_ida_lock, flags);
if (unlikely(ret == -EAGAIN))
goto again;
@@ -985,10 +986,12 @@
*/
void ida_simple_remove(struct ida *ida, unsigned int id)
{
+ unsigned long flags;
+
BUG_ON((int)id < 0);
- spin_lock(&simple_ida_lock);
+ spin_lock_irqsave(&simple_ida_lock, flags);
ida_remove(ida, id);
- spin_unlock(&simple_ida_lock);
+ spin_unlock_irqrestore(&simple_ida_lock, flags);
}
EXPORT_SYMBOL(ida_simple_remove);
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 860ec21..4298aba 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -990,7 +990,7 @@
page += (addr & ~HPAGE_PMD_MASK) >> PAGE_SHIFT;
VM_BUG_ON(!PageCompound(page));
if (flags & FOLL_GET)
- get_page(page);
+ get_page_foll(page);
out:
return page;
@@ -1202,6 +1202,7 @@
unsigned long head_index = page->index;
struct zone *zone = page_zone(page);
int zonestat;
+ int tail_count = 0;
/* prevent PageLRU to go away from under us, and freeze lru stats */
spin_lock_irq(&zone->lru_lock);
@@ -1210,11 +1211,27 @@
for (i = 1; i < HPAGE_PMD_NR; i++) {
struct page *page_tail = page + i;
- /* tail_page->_count cannot change */
- atomic_sub(atomic_read(&page_tail->_count), &page->_count);
- BUG_ON(page_count(page) <= 0);
- atomic_add(page_mapcount(page) + 1, &page_tail->_count);
- BUG_ON(atomic_read(&page_tail->_count) <= 0);
+ /* tail_page->_mapcount cannot change */
+ BUG_ON(page_mapcount(page_tail) < 0);
+ tail_count += page_mapcount(page_tail);
+ /* check for overflow */
+ BUG_ON(tail_count < 0);
+ BUG_ON(atomic_read(&page_tail->_count) != 0);
+ /*
+ * tail_page->_count is zero and not changing from
+ * under us. But get_page_unless_zero() may be running
+ * from under us on the tail_page. If we used
+ * atomic_set() below instead of atomic_add(), we
+ * would then run atomic_set() concurrently with
+ * get_page_unless_zero(), and atomic_set() is
+ * implemented in C not using locked ops. spin_unlock
+ * on x86 sometime uses locked ops because of PPro
+ * errata 66, 92, so unless somebody can guarantee
+ * atomic_set() here would be safe on all archs (and
+ * not only on x86), it's safer to use atomic_add().
+ */
+ atomic_add(page_mapcount(page) + page_mapcount(page_tail) + 1,
+ &page_tail->_count);
/* after clearing PageTail the gup refcount can be released */
smp_mb();
@@ -1232,10 +1249,7 @@
(1L << PG_uptodate)));
page_tail->flags |= (1L << PG_dirty);
- /*
- * 1) clear PageTail before overwriting first_page
- * 2) clear PageTail before clearing PageHead for VM_BUG_ON
- */
+ /* clear PageTail before overwriting first_page */
smp_wmb();
/*
@@ -1252,7 +1266,6 @@
* status is achieved setting a reserved bit in the
* pmd, not by clearing the present bit.
*/
- BUG_ON(page_mapcount(page_tail));
page_tail->_mapcount = page->_mapcount;
BUG_ON(page_tail->mapping);
@@ -1269,6 +1282,8 @@
lru_add_page_tail(zone, page, page_tail);
}
+ atomic_sub(tail_count, &page->_count);
+ BUG_ON(atomic_read(&page->_count) <= 0);
__dec_zone_page_state(page, NR_ANON_TRANSPARENT_HUGEPAGES);
__mod_zone_page_state(zone, NR_ANON_PAGES, HPAGE_PMD_NR);
diff --git a/mm/internal.h b/mm/internal.h
index d071d38..2189af4 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -37,6 +37,52 @@
atomic_dec(&page->_count);
}
+static inline void __get_page_tail_foll(struct page *page,
+ bool get_page_head)
+{
+ /*
+ * If we're getting a tail page, the elevated page->_count is
+ * required only in the head page and we will elevate the head
+ * page->_count and tail page->_mapcount.
+ *
+ * We elevate page_tail->_mapcount for tail pages to force
+ * page_tail->_count to be zero at all times to avoid getting
+ * false positives from get_page_unless_zero() with
+ * speculative page access (like in
+ * page_cache_get_speculative()) on tail pages.
+ */
+ VM_BUG_ON(atomic_read(&page->first_page->_count) <= 0);
+ VM_BUG_ON(atomic_read(&page->_count) != 0);
+ VM_BUG_ON(page_mapcount(page) < 0);
+ if (get_page_head)
+ atomic_inc(&page->first_page->_count);
+ atomic_inc(&page->_mapcount);
+}
+
+/*
+ * This is meant to be called as the FOLL_GET operation of
+ * follow_page() and it must be called while holding the proper PT
+ * lock while the pte (or pmd_trans_huge) is still mapping the page.
+ */
+static inline void get_page_foll(struct page *page)
+{
+ if (unlikely(PageTail(page)))
+ /*
+ * This is safe only because
+ * __split_huge_page_refcount() can't run under
+ * get_page_foll() because we hold the proper PT lock.
+ */
+ __get_page_tail_foll(page, true);
+ else {
+ /*
+ * Getting a normal page or the head of a compound page
+ * requires to already have an elevated page->_count.
+ */
+ VM_BUG_ON(atomic_read(&page->_count) <= 0);
+ atomic_inc(&page->_count);
+ }
+}
+
extern unsigned long highest_memmap_pfn;
/*
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 2d57555..7af1d5e 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -201,8 +201,8 @@
struct eventfd_ctx *eventfd;
};
-static void mem_cgroup_threshold(struct mem_cgroup *mem);
-static void mem_cgroup_oom_notify(struct mem_cgroup *mem);
+static void mem_cgroup_threshold(struct mem_cgroup *memcg);
+static void mem_cgroup_oom_notify(struct mem_cgroup *memcg);
/*
* The memory controller data structure. The memory controller controls both
@@ -362,29 +362,29 @@
#define MEM_CGROUP_RECLAIM_SOFT_BIT 0x2
#define MEM_CGROUP_RECLAIM_SOFT (1 << MEM_CGROUP_RECLAIM_SOFT_BIT)
-static void mem_cgroup_get(struct mem_cgroup *mem);
-static void mem_cgroup_put(struct mem_cgroup *mem);
-static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
-static void drain_all_stock_async(struct mem_cgroup *mem);
+static void mem_cgroup_get(struct mem_cgroup *memcg);
+static void mem_cgroup_put(struct mem_cgroup *memcg);
+static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg);
+static void drain_all_stock_async(struct mem_cgroup *memcg);
static struct mem_cgroup_per_zone *
-mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
+mem_cgroup_zoneinfo(struct mem_cgroup *memcg, int nid, int zid)
{
- return &mem->info.nodeinfo[nid]->zoneinfo[zid];
+ return &memcg->info.nodeinfo[nid]->zoneinfo[zid];
}
-struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *mem)
+struct cgroup_subsys_state *mem_cgroup_css(struct mem_cgroup *memcg)
{
- return &mem->css;
+ return &memcg->css;
}
static struct mem_cgroup_per_zone *
-page_cgroup_zoneinfo(struct mem_cgroup *mem, struct page *page)
+page_cgroup_zoneinfo(struct mem_cgroup *memcg, struct page *page)
{
int nid = page_to_nid(page);
int zid = page_zonenum(page);
- return mem_cgroup_zoneinfo(mem, nid, zid);
+ return mem_cgroup_zoneinfo(memcg, nid, zid);
}
static struct mem_cgroup_tree_per_zone *
@@ -403,7 +403,7 @@
}
static void
-__mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
+__mem_cgroup_insert_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz,
unsigned long long new_usage_in_excess)
@@ -437,7 +437,7 @@
}
static void
-__mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+__mem_cgroup_remove_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz)
{
@@ -448,17 +448,17 @@
}
static void
-mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+mem_cgroup_remove_exceeded(struct mem_cgroup *memcg,
struct mem_cgroup_per_zone *mz,
struct mem_cgroup_tree_per_zone *mctz)
{
spin_lock(&mctz->lock);
- __mem_cgroup_remove_exceeded(mem, mz, mctz);
+ __mem_cgroup_remove_exceeded(memcg, mz, mctz);
spin_unlock(&mctz->lock);
}
-static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
+static void mem_cgroup_update_tree(struct mem_cgroup *memcg, struct page *page)
{
unsigned long long excess;
struct mem_cgroup_per_zone *mz;
@@ -471,9 +471,9 @@
* Necessary to update all ancestors when hierarchy is used.
* because their event counter is not touched.
*/
- for (; mem; mem = parent_mem_cgroup(mem)) {
- mz = mem_cgroup_zoneinfo(mem, nid, zid);
- excess = res_counter_soft_limit_excess(&mem->res);
+ for (; memcg; memcg = parent_mem_cgroup(memcg)) {
+ mz = mem_cgroup_zoneinfo(memcg, nid, zid);
+ excess = res_counter_soft_limit_excess(&memcg->res);
/*
* We have to update the tree if mz is on RB-tree or
* mem is over its softlimit.
@@ -482,18 +482,18 @@
spin_lock(&mctz->lock);
/* if on-tree, remove it */
if (mz->on_tree)
- __mem_cgroup_remove_exceeded(mem, mz, mctz);
+ __mem_cgroup_remove_exceeded(memcg, mz, mctz);
/*
* Insert again. mz->usage_in_excess will be updated.
* If excess is 0, no tree ops.
*/
- __mem_cgroup_insert_exceeded(mem, mz, mctz, excess);
+ __mem_cgroup_insert_exceeded(memcg, mz, mctz, excess);
spin_unlock(&mctz->lock);
}
}
}
-static void mem_cgroup_remove_from_trees(struct mem_cgroup *mem)
+static void mem_cgroup_remove_from_trees(struct mem_cgroup *memcg)
{
int node, zone;
struct mem_cgroup_per_zone *mz;
@@ -501,9 +501,9 @@
for_each_node_state(node, N_POSSIBLE) {
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
- mz = mem_cgroup_zoneinfo(mem, node, zone);
+ mz = mem_cgroup_zoneinfo(memcg, node, zone);
mctz = soft_limit_tree_node_zone(node, zone);
- mem_cgroup_remove_exceeded(mem, mz, mctz);
+ mem_cgroup_remove_exceeded(memcg, mz, mctz);
}
}
}
@@ -564,7 +564,7 @@
* common workload, threashold and synchonization as vmstat[] should be
* implemented.
*/
-static long mem_cgroup_read_stat(struct mem_cgroup *mem,
+static long mem_cgroup_read_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
long val = 0;
@@ -572,81 +572,83 @@
get_online_cpus();
for_each_online_cpu(cpu)
- val += per_cpu(mem->stat->count[idx], cpu);
+ val += per_cpu(memcg->stat->count[idx], cpu);
#ifdef CONFIG_HOTPLUG_CPU
- spin_lock(&mem->pcp_counter_lock);
- val += mem->nocpu_base.count[idx];
- spin_unlock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
+ val += memcg->nocpu_base.count[idx];
+ spin_unlock(&memcg->pcp_counter_lock);
#endif
put_online_cpus();
return val;
}
-static void mem_cgroup_swap_statistics(struct mem_cgroup *mem,
+static void mem_cgroup_swap_statistics(struct mem_cgroup *memcg,
bool charge)
{
int val = (charge) ? 1 : -1;
- this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_SWAPOUT], val);
+ this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_SWAPOUT], val);
}
-void mem_cgroup_pgfault(struct mem_cgroup *mem, int val)
+void mem_cgroup_pgfault(struct mem_cgroup *memcg, int val)
{
- this_cpu_add(mem->stat->events[MEM_CGROUP_EVENTS_PGFAULT], val);
+ this_cpu_add(memcg->stat->events[MEM_CGROUP_EVENTS_PGFAULT], val);
}
-void mem_cgroup_pgmajfault(struct mem_cgroup *mem, int val)
+void mem_cgroup_pgmajfault(struct mem_cgroup *memcg, int val)
{
- this_cpu_add(mem->stat->events[MEM_CGROUP_EVENTS_PGMAJFAULT], val);
+ this_cpu_add(memcg->stat->events[MEM_CGROUP_EVENTS_PGMAJFAULT], val);
}
-static unsigned long mem_cgroup_read_events(struct mem_cgroup *mem,
+static unsigned long mem_cgroup_read_events(struct mem_cgroup *memcg,
enum mem_cgroup_events_index idx)
{
unsigned long val = 0;
int cpu;
for_each_online_cpu(cpu)
- val += per_cpu(mem->stat->events[idx], cpu);
+ val += per_cpu(memcg->stat->events[idx], cpu);
#ifdef CONFIG_HOTPLUG_CPU
- spin_lock(&mem->pcp_counter_lock);
- val += mem->nocpu_base.events[idx];
- spin_unlock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
+ val += memcg->nocpu_base.events[idx];
+ spin_unlock(&memcg->pcp_counter_lock);
#endif
return val;
}
-static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
+static void mem_cgroup_charge_statistics(struct mem_cgroup *memcg,
bool file, int nr_pages)
{
preempt_disable();
if (file)
- __this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_CACHE], nr_pages);
+ __this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_CACHE],
+ nr_pages);
else
- __this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_RSS], nr_pages);
+ __this_cpu_add(memcg->stat->count[MEM_CGROUP_STAT_RSS],
+ nr_pages);
/* pagein of a big page is an event. So, ignore page size */
if (nr_pages > 0)
- __this_cpu_inc(mem->stat->events[MEM_CGROUP_EVENTS_PGPGIN]);
+ __this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGPGIN]);
else {
- __this_cpu_inc(mem->stat->events[MEM_CGROUP_EVENTS_PGPGOUT]);
+ __this_cpu_inc(memcg->stat->events[MEM_CGROUP_EVENTS_PGPGOUT]);
nr_pages = -nr_pages; /* for event */
}
- __this_cpu_add(mem->stat->events[MEM_CGROUP_EVENTS_COUNT], nr_pages);
+ __this_cpu_add(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT], nr_pages);
preempt_enable();
}
unsigned long
-mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *mem, int nid, int zid,
+mem_cgroup_zone_nr_lru_pages(struct mem_cgroup *memcg, int nid, int zid,
unsigned int lru_mask)
{
struct mem_cgroup_per_zone *mz;
enum lru_list l;
unsigned long ret = 0;
- mz = mem_cgroup_zoneinfo(mem, nid, zid);
+ mz = mem_cgroup_zoneinfo(memcg, nid, zid);
for_each_lru(l) {
if (BIT(l) & lru_mask)
@@ -656,44 +658,45 @@
}
static unsigned long
-mem_cgroup_node_nr_lru_pages(struct mem_cgroup *mem,
+mem_cgroup_node_nr_lru_pages(struct mem_cgroup *memcg,
int nid, unsigned int lru_mask)
{
u64 total = 0;
int zid;
for (zid = 0; zid < MAX_NR_ZONES; zid++)
- total += mem_cgroup_zone_nr_lru_pages(mem, nid, zid, lru_mask);
+ total += mem_cgroup_zone_nr_lru_pages(memcg,
+ nid, zid, lru_mask);
return total;
}
-static unsigned long mem_cgroup_nr_lru_pages(struct mem_cgroup *mem,
+static unsigned long mem_cgroup_nr_lru_pages(struct mem_cgroup *memcg,
unsigned int lru_mask)
{
int nid;
u64 total = 0;
for_each_node_state(nid, N_HIGH_MEMORY)
- total += mem_cgroup_node_nr_lru_pages(mem, nid, lru_mask);
+ total += mem_cgroup_node_nr_lru_pages(memcg, nid, lru_mask);
return total;
}
-static bool __memcg_event_check(struct mem_cgroup *mem, int target)
+static bool __memcg_event_check(struct mem_cgroup *memcg, int target)
{
unsigned long val, next;
- val = this_cpu_read(mem->stat->events[MEM_CGROUP_EVENTS_COUNT]);
- next = this_cpu_read(mem->stat->targets[target]);
+ val = __this_cpu_read(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT]);
+ next = __this_cpu_read(memcg->stat->targets[target]);
/* from time_after() in jiffies.h */
return ((long)next - (long)val < 0);
}
-static void __mem_cgroup_target_update(struct mem_cgroup *mem, int target)
+static void __mem_cgroup_target_update(struct mem_cgroup *memcg, int target)
{
unsigned long val, next;
- val = this_cpu_read(mem->stat->events[MEM_CGROUP_EVENTS_COUNT]);
+ val = __this_cpu_read(memcg->stat->events[MEM_CGROUP_EVENTS_COUNT]);
switch (target) {
case MEM_CGROUP_TARGET_THRESH:
@@ -709,34 +712,36 @@
return;
}
- this_cpu_write(mem->stat->targets[target], next);
+ __this_cpu_write(memcg->stat->targets[target], next);
}
/*
* Check events in order.
*
*/
-static void memcg_check_events(struct mem_cgroup *mem, struct page *page)
+static void memcg_check_events(struct mem_cgroup *memcg, struct page *page)
{
+ preempt_disable();
/* threshold event is triggered in finer grain than soft limit */
- if (unlikely(__memcg_event_check(mem, MEM_CGROUP_TARGET_THRESH))) {
- mem_cgroup_threshold(mem);
- __mem_cgroup_target_update(mem, MEM_CGROUP_TARGET_THRESH);
- if (unlikely(__memcg_event_check(mem,
+ if (unlikely(__memcg_event_check(memcg, MEM_CGROUP_TARGET_THRESH))) {
+ mem_cgroup_threshold(memcg);
+ __mem_cgroup_target_update(memcg, MEM_CGROUP_TARGET_THRESH);
+ if (unlikely(__memcg_event_check(memcg,
MEM_CGROUP_TARGET_SOFTLIMIT))) {
- mem_cgroup_update_tree(mem, page);
- __mem_cgroup_target_update(mem,
+ mem_cgroup_update_tree(memcg, page);
+ __mem_cgroup_target_update(memcg,
MEM_CGROUP_TARGET_SOFTLIMIT);
}
#if MAX_NUMNODES > 1
- if (unlikely(__memcg_event_check(mem,
+ if (unlikely(__memcg_event_check(memcg,
MEM_CGROUP_TARGET_NUMAINFO))) {
- atomic_inc(&mem->numainfo_events);
- __mem_cgroup_target_update(mem,
+ atomic_inc(&memcg->numainfo_events);
+ __mem_cgroup_target_update(memcg,
MEM_CGROUP_TARGET_NUMAINFO);
}
#endif
}
+ preempt_enable();
}
static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
@@ -762,7 +767,7 @@
struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
if (!mm)
return NULL;
@@ -773,25 +778,25 @@
*/
rcu_read_lock();
do {
- mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
- if (unlikely(!mem))
+ memcg = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!memcg))
break;
- } while (!css_tryget(&mem->css));
+ } while (!css_tryget(&memcg->css));
rcu_read_unlock();
- return mem;
+ return memcg;
}
/* The caller has to guarantee "mem" exists before calling this */
-static struct mem_cgroup *mem_cgroup_start_loop(struct mem_cgroup *mem)
+static struct mem_cgroup *mem_cgroup_start_loop(struct mem_cgroup *memcg)
{
struct cgroup_subsys_state *css;
int found;
- if (!mem) /* ROOT cgroup has the smallest ID */
+ if (!memcg) /* ROOT cgroup has the smallest ID */
return root_mem_cgroup; /*css_put/get against root is ignored*/
- if (!mem->use_hierarchy) {
- if (css_tryget(&mem->css))
- return mem;
+ if (!memcg->use_hierarchy) {
+ if (css_tryget(&memcg->css))
+ return memcg;
return NULL;
}
rcu_read_lock();
@@ -799,13 +804,13 @@
* searching a memory cgroup which has the smallest ID under given
* ROOT cgroup. (ID >= 1)
*/
- css = css_get_next(&mem_cgroup_subsys, 1, &mem->css, &found);
+ css = css_get_next(&mem_cgroup_subsys, 1, &memcg->css, &found);
if (css && css_tryget(css))
- mem = container_of(css, struct mem_cgroup, css);
+ memcg = container_of(css, struct mem_cgroup, css);
else
- mem = NULL;
+ memcg = NULL;
rcu_read_unlock();
- return mem;
+ return memcg;
}
static struct mem_cgroup *mem_cgroup_get_next(struct mem_cgroup *iter,
@@ -859,29 +864,29 @@
for_each_mem_cgroup_tree_cond(iter, NULL, true)
-static inline bool mem_cgroup_is_root(struct mem_cgroup *mem)
+static inline bool mem_cgroup_is_root(struct mem_cgroup *memcg)
{
- return (mem == root_mem_cgroup);
+ return (memcg == root_mem_cgroup);
}
void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
if (!mm)
return;
rcu_read_lock();
- mem = mem_cgroup_from_task(rcu_dereference(mm->owner));
- if (unlikely(!mem))
+ memcg = mem_cgroup_from_task(rcu_dereference(mm->owner));
+ if (unlikely(!memcg))
goto out;
switch (idx) {
case PGMAJFAULT:
- mem_cgroup_pgmajfault(mem, 1);
+ mem_cgroup_pgmajfault(memcg, 1);
break;
case PGFAULT:
- mem_cgroup_pgfault(mem, 1);
+ mem_cgroup_pgfault(memcg, 1);
break;
default:
BUG();
@@ -990,6 +995,16 @@
return;
pc = lookup_page_cgroup(page);
VM_BUG_ON(PageCgroupAcctLRU(pc));
+ /*
+ * putback: charge:
+ * SetPageLRU SetPageCgroupUsed
+ * smp_mb smp_mb
+ * PageCgroupUsed && add to memcg LRU PageLRU && add to memcg LRU
+ *
+ * Ensure that one of the two sides adds the page to the memcg
+ * LRU during a race.
+ */
+ smp_mb();
if (!PageCgroupUsed(pc))
return;
/* Ensure pc->mem_cgroup is visible after reading PCG_USED. */
@@ -1041,7 +1056,16 @@
unsigned long flags;
struct zone *zone = page_zone(page);
struct page_cgroup *pc = lookup_page_cgroup(page);
-
+ /*
+ * putback: charge:
+ * SetPageLRU SetPageCgroupUsed
+ * smp_mb smp_mb
+ * PageCgroupUsed && add to memcg LRU PageLRU && add to memcg LRU
+ *
+ * Ensure that one of the two sides adds the page to the memcg
+ * LRU during a race.
+ */
+ smp_mb();
/* taking care of that the page is added to LRU while we commit it */
if (likely(!PageLRU(page)))
return;
@@ -1063,21 +1087,21 @@
}
/*
- * Checks whether given mem is same or in the root_mem's
+ * Checks whether given mem is same or in the root_mem_cgroup's
* hierarchy subtree
*/
-static bool mem_cgroup_same_or_subtree(const struct mem_cgroup *root_mem,
- struct mem_cgroup *mem)
+static bool mem_cgroup_same_or_subtree(const struct mem_cgroup *root_memcg,
+ struct mem_cgroup *memcg)
{
- if (root_mem != mem) {
- return (root_mem->use_hierarchy &&
- css_is_ancestor(&mem->css, &root_mem->css));
+ if (root_memcg != memcg) {
+ return (root_memcg->use_hierarchy &&
+ css_is_ancestor(&memcg->css, &root_memcg->css));
}
return true;
}
-int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem)
+int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *memcg)
{
int ret;
struct mem_cgroup *curr = NULL;
@@ -1091,25 +1115,29 @@
if (!curr)
return 0;
/*
- * We should check use_hierarchy of "mem" not "curr". Because checking
+ * We should check use_hierarchy of "memcg" not "curr". Because checking
* use_hierarchy of "curr" here make this function true if hierarchy is
- * enabled in "curr" and "curr" is a child of "mem" in *cgroup*
- * hierarchy(even if use_hierarchy is disabled in "mem").
+ * enabled in "curr" and "curr" is a child of "memcg" in *cgroup*
+ * hierarchy(even if use_hierarchy is disabled in "memcg").
*/
- ret = mem_cgroup_same_or_subtree(mem, curr);
+ ret = mem_cgroup_same_or_subtree(memcg, curr);
css_put(&curr->css);
return ret;
}
-static int calc_inactive_ratio(struct mem_cgroup *memcg, unsigned long *present_pages)
+int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
- unsigned long active;
- unsigned long inactive;
- unsigned long gb;
unsigned long inactive_ratio;
+ int nid = zone_to_nid(zone);
+ int zid = zone_idx(zone);
+ unsigned long inactive;
+ unsigned long active;
+ unsigned long gb;
- inactive = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_ANON));
- active = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_ANON));
+ inactive = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_INACTIVE_ANON));
+ active = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_ACTIVE_ANON));
gb = (inactive + active) >> (30 - PAGE_SHIFT);
if (gb)
@@ -1117,39 +1145,20 @@
else
inactive_ratio = 1;
- if (present_pages) {
- present_pages[0] = inactive;
- present_pages[1] = active;
- }
-
- return inactive_ratio;
+ return inactive * inactive_ratio < active;
}
-int mem_cgroup_inactive_anon_is_low(struct mem_cgroup *memcg)
+int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg, struct zone *zone)
{
unsigned long active;
unsigned long inactive;
- unsigned long present_pages[2];
- unsigned long inactive_ratio;
+ int zid = zone_idx(zone);
+ int nid = zone_to_nid(zone);
- inactive_ratio = calc_inactive_ratio(memcg, present_pages);
-
- inactive = present_pages[0];
- active = present_pages[1];
-
- if (inactive * inactive_ratio < active)
- return 1;
-
- return 0;
-}
-
-int mem_cgroup_inactive_file_is_low(struct mem_cgroup *memcg)
-{
- unsigned long active;
- unsigned long inactive;
-
- inactive = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_FILE));
- active = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_FILE));
+ inactive = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_INACTIVE_FILE));
+ active = mem_cgroup_zone_nr_lru_pages(memcg, nid, zid,
+ BIT(LRU_ACTIVE_FILE));
return (active > inactive);
}
@@ -1254,13 +1263,13 @@
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
*/
-static unsigned long mem_cgroup_margin(struct mem_cgroup *mem)
+static unsigned long mem_cgroup_margin(struct mem_cgroup *memcg)
{
unsigned long long margin;
- margin = res_counter_margin(&mem->res);
+ margin = res_counter_margin(&memcg->res);
if (do_swap_account)
- margin = min(margin, res_counter_margin(&mem->memsw));
+ margin = min(margin, res_counter_margin(&memcg->memsw));
return margin >> PAGE_SHIFT;
}
@@ -1275,33 +1284,33 @@
return memcg->swappiness;
}
-static void mem_cgroup_start_move(struct mem_cgroup *mem)
+static void mem_cgroup_start_move(struct mem_cgroup *memcg)
{
int cpu;
get_online_cpus();
- spin_lock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
for_each_online_cpu(cpu)
- per_cpu(mem->stat->count[MEM_CGROUP_ON_MOVE], cpu) += 1;
- mem->nocpu_base.count[MEM_CGROUP_ON_MOVE] += 1;
- spin_unlock(&mem->pcp_counter_lock);
+ per_cpu(memcg->stat->count[MEM_CGROUP_ON_MOVE], cpu) += 1;
+ memcg->nocpu_base.count[MEM_CGROUP_ON_MOVE] += 1;
+ spin_unlock(&memcg->pcp_counter_lock);
put_online_cpus();
synchronize_rcu();
}
-static void mem_cgroup_end_move(struct mem_cgroup *mem)
+static void mem_cgroup_end_move(struct mem_cgroup *memcg)
{
int cpu;
- if (!mem)
+ if (!memcg)
return;
get_online_cpus();
- spin_lock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
for_each_online_cpu(cpu)
- per_cpu(mem->stat->count[MEM_CGROUP_ON_MOVE], cpu) -= 1;
- mem->nocpu_base.count[MEM_CGROUP_ON_MOVE] -= 1;
- spin_unlock(&mem->pcp_counter_lock);
+ per_cpu(memcg->stat->count[MEM_CGROUP_ON_MOVE], cpu) -= 1;
+ memcg->nocpu_base.count[MEM_CGROUP_ON_MOVE] -= 1;
+ spin_unlock(&memcg->pcp_counter_lock);
put_online_cpus();
}
/*
@@ -1316,13 +1325,13 @@
* waiting at hith-memory prressure caused by "move".
*/
-static bool mem_cgroup_stealed(struct mem_cgroup *mem)
+static bool mem_cgroup_stealed(struct mem_cgroup *memcg)
{
VM_BUG_ON(!rcu_read_lock_held());
- return this_cpu_read(mem->stat->count[MEM_CGROUP_ON_MOVE]) > 0;
+ return this_cpu_read(memcg->stat->count[MEM_CGROUP_ON_MOVE]) > 0;
}
-static bool mem_cgroup_under_move(struct mem_cgroup *mem)
+static bool mem_cgroup_under_move(struct mem_cgroup *memcg)
{
struct mem_cgroup *from;
struct mem_cgroup *to;
@@ -1337,17 +1346,17 @@
if (!from)
goto unlock;
- ret = mem_cgroup_same_or_subtree(mem, from)
- || mem_cgroup_same_or_subtree(mem, to);
+ ret = mem_cgroup_same_or_subtree(memcg, from)
+ || mem_cgroup_same_or_subtree(memcg, to);
unlock:
spin_unlock(&mc.lock);
return ret;
}
-static bool mem_cgroup_wait_acct_move(struct mem_cgroup *mem)
+static bool mem_cgroup_wait_acct_move(struct mem_cgroup *memcg)
{
if (mc.moving_task && current != mc.moving_task) {
- if (mem_cgroup_under_move(mem)) {
+ if (mem_cgroup_under_move(memcg)) {
DEFINE_WAIT(wait);
prepare_to_wait(&mc.waitq, &wait, TASK_INTERRUPTIBLE);
/* moving charge context might have finished. */
@@ -1431,12 +1440,12 @@
* This function returns the number of memcg under hierarchy tree. Returns
* 1(self count) if no children.
*/
-static int mem_cgroup_count_children(struct mem_cgroup *mem)
+static int mem_cgroup_count_children(struct mem_cgroup *memcg)
{
int num = 0;
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
num++;
return num;
}
@@ -1466,21 +1475,21 @@
* that to reclaim free pages from.
*/
static struct mem_cgroup *
-mem_cgroup_select_victim(struct mem_cgroup *root_mem)
+mem_cgroup_select_victim(struct mem_cgroup *root_memcg)
{
struct mem_cgroup *ret = NULL;
struct cgroup_subsys_state *css;
int nextid, found;
- if (!root_mem->use_hierarchy) {
- css_get(&root_mem->css);
- ret = root_mem;
+ if (!root_memcg->use_hierarchy) {
+ css_get(&root_memcg->css);
+ ret = root_memcg;
}
while (!ret) {
rcu_read_lock();
- nextid = root_mem->last_scanned_child + 1;
- css = css_get_next(&mem_cgroup_subsys, nextid, &root_mem->css,
+ nextid = root_memcg->last_scanned_child + 1;
+ css = css_get_next(&mem_cgroup_subsys, nextid, &root_memcg->css,
&found);
if (css && css_tryget(css))
ret = container_of(css, struct mem_cgroup, css);
@@ -1489,9 +1498,9 @@
/* Updates scanning parameter */
if (!css) {
/* this means start scan from ID:1 */
- root_mem->last_scanned_child = 0;
+ root_memcg->last_scanned_child = 0;
} else
- root_mem->last_scanned_child = found;
+ root_memcg->last_scanned_child = found;
}
return ret;
@@ -1507,14 +1516,14 @@
* reclaimable pages on a node. Returns true if there are any reclaimable
* pages in the node.
*/
-static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *mem,
+static bool test_mem_cgroup_node_reclaimable(struct mem_cgroup *memcg,
int nid, bool noswap)
{
- if (mem_cgroup_node_nr_lru_pages(mem, nid, LRU_ALL_FILE))
+ if (mem_cgroup_node_nr_lru_pages(memcg, nid, LRU_ALL_FILE))
return true;
if (noswap || !total_swap_pages)
return false;
- if (mem_cgroup_node_nr_lru_pages(mem, nid, LRU_ALL_ANON))
+ if (mem_cgroup_node_nr_lru_pages(memcg, nid, LRU_ALL_ANON))
return true;
return false;
@@ -1527,29 +1536,29 @@
* nodes based on the zonelist. So update the list loosely once per 10 secs.
*
*/
-static void mem_cgroup_may_update_nodemask(struct mem_cgroup *mem)
+static void mem_cgroup_may_update_nodemask(struct mem_cgroup *memcg)
{
int nid;
/*
* numainfo_events > 0 means there was at least NUMAINFO_EVENTS_TARGET
* pagein/pageout changes since the last update.
*/
- if (!atomic_read(&mem->numainfo_events))
+ if (!atomic_read(&memcg->numainfo_events))
return;
- if (atomic_inc_return(&mem->numainfo_updating) > 1)
+ if (atomic_inc_return(&memcg->numainfo_updating) > 1)
return;
/* make a nodemask where this memcg uses memory from */
- mem->scan_nodes = node_states[N_HIGH_MEMORY];
+ memcg->scan_nodes = node_states[N_HIGH_MEMORY];
for_each_node_mask(nid, node_states[N_HIGH_MEMORY]) {
- if (!test_mem_cgroup_node_reclaimable(mem, nid, false))
- node_clear(nid, mem->scan_nodes);
+ if (!test_mem_cgroup_node_reclaimable(memcg, nid, false))
+ node_clear(nid, memcg->scan_nodes);
}
- atomic_set(&mem->numainfo_events, 0);
- atomic_set(&mem->numainfo_updating, 0);
+ atomic_set(&memcg->numainfo_events, 0);
+ atomic_set(&memcg->numainfo_updating, 0);
}
/*
@@ -1564,16 +1573,16 @@
*
* Now, we use round-robin. Better algorithm is welcomed.
*/
-int mem_cgroup_select_victim_node(struct mem_cgroup *mem)
+int mem_cgroup_select_victim_node(struct mem_cgroup *memcg)
{
int node;
- mem_cgroup_may_update_nodemask(mem);
- node = mem->last_scanned_node;
+ mem_cgroup_may_update_nodemask(memcg);
+ node = memcg->last_scanned_node;
- node = next_node(node, mem->scan_nodes);
+ node = next_node(node, memcg->scan_nodes);
if (node == MAX_NUMNODES)
- node = first_node(mem->scan_nodes);
+ node = first_node(memcg->scan_nodes);
/*
* We call this when we hit limit, not when pages are added to LRU.
* No LRU may hold pages because all pages are UNEVICTABLE or
@@ -1583,7 +1592,7 @@
if (unlikely(node == MAX_NUMNODES))
node = numa_node_id();
- mem->last_scanned_node = node;
+ memcg->last_scanned_node = node;
return node;
}
@@ -1593,7 +1602,7 @@
* unused nodes. But scan_nodes is lazily updated and may not cotain
* enough new information. We need to do double check.
*/
-bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap)
+bool mem_cgroup_reclaimable(struct mem_cgroup *memcg, bool noswap)
{
int nid;
@@ -1601,12 +1610,12 @@
* quick check...making use of scan_node.
* We can skip unused nodes.
*/
- if (!nodes_empty(mem->scan_nodes)) {
- for (nid = first_node(mem->scan_nodes);
+ if (!nodes_empty(memcg->scan_nodes)) {
+ for (nid = first_node(memcg->scan_nodes);
nid < MAX_NUMNODES;
- nid = next_node(nid, mem->scan_nodes)) {
+ nid = next_node(nid, memcg->scan_nodes)) {
- if (test_mem_cgroup_node_reclaimable(mem, nid, noswap))
+ if (test_mem_cgroup_node_reclaimable(memcg, nid, noswap))
return true;
}
}
@@ -1614,23 +1623,23 @@
* Check rest of nodes.
*/
for_each_node_state(nid, N_HIGH_MEMORY) {
- if (node_isset(nid, mem->scan_nodes))
+ if (node_isset(nid, memcg->scan_nodes))
continue;
- if (test_mem_cgroup_node_reclaimable(mem, nid, noswap))
+ if (test_mem_cgroup_node_reclaimable(memcg, nid, noswap))
return true;
}
return false;
}
#else
-int mem_cgroup_select_victim_node(struct mem_cgroup *mem)
+int mem_cgroup_select_victim_node(struct mem_cgroup *memcg)
{
return 0;
}
-bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap)
+bool mem_cgroup_reclaimable(struct mem_cgroup *memcg, bool noswap)
{
- return test_mem_cgroup_node_reclaimable(mem, 0, noswap);
+ return test_mem_cgroup_node_reclaimable(memcg, 0, noswap);
}
#endif
@@ -1639,14 +1648,14 @@
* we reclaimed from, so that we don't end up penalizing one child extensively
* based on its position in the children list.
*
- * root_mem is the original ancestor that we've been reclaim from.
+ * root_memcg is the original ancestor that we've been reclaim from.
*
- * We give up and return to the caller when we visit root_mem twice.
+ * We give up and return to the caller when we visit root_memcg twice.
* (other groups can be removed while we're walking....)
*
* If shrink==true, for avoiding to free too much, this returns immedieately.
*/
-static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
+static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_memcg,
struct zone *zone,
gfp_t gfp_mask,
unsigned long reclaim_options,
@@ -1661,15 +1670,15 @@
unsigned long excess;
unsigned long nr_scanned;
- excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
+ excess = res_counter_soft_limit_excess(&root_memcg->res) >> PAGE_SHIFT;
/* If memsw_is_minimum==1, swap-out is of-no-use. */
- if (!check_soft && !shrink && root_mem->memsw_is_minimum)
+ if (!check_soft && !shrink && root_memcg->memsw_is_minimum)
noswap = true;
while (1) {
- victim = mem_cgroup_select_victim(root_mem);
- if (victim == root_mem) {
+ victim = mem_cgroup_select_victim(root_memcg);
+ if (victim == root_memcg) {
loop++;
/*
* We are not draining per cpu cached charges during
@@ -1678,7 +1687,7 @@
* charges will not give any.
*/
if (!check_soft && loop >= 1)
- drain_all_stock_async(root_mem);
+ drain_all_stock_async(root_memcg);
if (loop >= 2) {
/*
* If we have not been able to reclaim
@@ -1725,9 +1734,9 @@
return ret;
total += ret;
if (check_soft) {
- if (!res_counter_soft_limit_excess(&root_mem->res))
+ if (!res_counter_soft_limit_excess(&root_memcg->res))
return total;
- } else if (mem_cgroup_margin(root_mem))
+ } else if (mem_cgroup_margin(root_memcg))
return total;
}
return total;
@@ -1738,12 +1747,12 @@
* If someone is running, return false.
* Has to be called with memcg_oom_lock
*/
-static bool mem_cgroup_oom_lock(struct mem_cgroup *mem)
+static bool mem_cgroup_oom_lock(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter, *failed = NULL;
bool cond = true;
- for_each_mem_cgroup_tree_cond(iter, mem, cond) {
+ for_each_mem_cgroup_tree_cond(iter, memcg, cond) {
if (iter->oom_lock) {
/*
* this subtree of our hierarchy is already locked
@@ -1763,7 +1772,7 @@
* what we set up to the failing subtree
*/
cond = true;
- for_each_mem_cgroup_tree_cond(iter, mem, cond) {
+ for_each_mem_cgroup_tree_cond(iter, memcg, cond) {
if (iter == failed) {
cond = false;
continue;
@@ -1776,24 +1785,24 @@
/*
* Has to be called with memcg_oom_lock
*/
-static int mem_cgroup_oom_unlock(struct mem_cgroup *mem)
+static int mem_cgroup_oom_unlock(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
iter->oom_lock = false;
return 0;
}
-static void mem_cgroup_mark_under_oom(struct mem_cgroup *mem)
+static void mem_cgroup_mark_under_oom(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
atomic_inc(&iter->under_oom);
}
-static void mem_cgroup_unmark_under_oom(struct mem_cgroup *mem)
+static void mem_cgroup_unmark_under_oom(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
@@ -1802,7 +1811,7 @@
* mem_cgroup_oom_lock() may not be called. We have to use
* atomic_add_unless() here.
*/
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
atomic_add_unless(&iter->under_oom, -1, 0);
}
@@ -1817,85 +1826,85 @@
static int memcg_oom_wake_function(wait_queue_t *wait,
unsigned mode, int sync, void *arg)
{
- struct mem_cgroup *wake_mem = (struct mem_cgroup *)arg,
- *oom_wait_mem;
+ struct mem_cgroup *wake_memcg = (struct mem_cgroup *)arg,
+ *oom_wait_memcg;
struct oom_wait_info *oom_wait_info;
oom_wait_info = container_of(wait, struct oom_wait_info, wait);
- oom_wait_mem = oom_wait_info->mem;
+ oom_wait_memcg = oom_wait_info->mem;
/*
* Both of oom_wait_info->mem and wake_mem are stable under us.
* Then we can use css_is_ancestor without taking care of RCU.
*/
- if (!mem_cgroup_same_or_subtree(oom_wait_mem, wake_mem)
- && !mem_cgroup_same_or_subtree(wake_mem, oom_wait_mem))
+ if (!mem_cgroup_same_or_subtree(oom_wait_memcg, wake_memcg)
+ && !mem_cgroup_same_or_subtree(wake_memcg, oom_wait_memcg))
return 0;
return autoremove_wake_function(wait, mode, sync, arg);
}
-static void memcg_wakeup_oom(struct mem_cgroup *mem)
+static void memcg_wakeup_oom(struct mem_cgroup *memcg)
{
- /* for filtering, pass "mem" as argument. */
- __wake_up(&memcg_oom_waitq, TASK_NORMAL, 0, mem);
+ /* for filtering, pass "memcg" as argument. */
+ __wake_up(&memcg_oom_waitq, TASK_NORMAL, 0, memcg);
}
-static void memcg_oom_recover(struct mem_cgroup *mem)
+static void memcg_oom_recover(struct mem_cgroup *memcg)
{
- if (mem && atomic_read(&mem->under_oom))
- memcg_wakeup_oom(mem);
+ if (memcg && atomic_read(&memcg->under_oom))
+ memcg_wakeup_oom(memcg);
}
/*
* try to call OOM killer. returns false if we should exit memory-reclaim loop.
*/
-bool mem_cgroup_handle_oom(struct mem_cgroup *mem, gfp_t mask)
+bool mem_cgroup_handle_oom(struct mem_cgroup *memcg, gfp_t mask)
{
struct oom_wait_info owait;
bool locked, need_to_kill;
- owait.mem = mem;
+ owait.mem = memcg;
owait.wait.flags = 0;
owait.wait.func = memcg_oom_wake_function;
owait.wait.private = current;
INIT_LIST_HEAD(&owait.wait.task_list);
need_to_kill = true;
- mem_cgroup_mark_under_oom(mem);
+ mem_cgroup_mark_under_oom(memcg);
- /* At first, try to OOM lock hierarchy under mem.*/
+ /* At first, try to OOM lock hierarchy under memcg.*/
spin_lock(&memcg_oom_lock);
- locked = mem_cgroup_oom_lock(mem);
+ locked = mem_cgroup_oom_lock(memcg);
/*
* Even if signal_pending(), we can't quit charge() loop without
* accounting. So, UNINTERRUPTIBLE is appropriate. But SIGKILL
* under OOM is always welcomed, use TASK_KILLABLE here.
*/
prepare_to_wait(&memcg_oom_waitq, &owait.wait, TASK_KILLABLE);
- if (!locked || mem->oom_kill_disable)
+ if (!locked || memcg->oom_kill_disable)
need_to_kill = false;
if (locked)
- mem_cgroup_oom_notify(mem);
+ mem_cgroup_oom_notify(memcg);
spin_unlock(&memcg_oom_lock);
if (need_to_kill) {
finish_wait(&memcg_oom_waitq, &owait.wait);
- mem_cgroup_out_of_memory(mem, mask);
+ mem_cgroup_out_of_memory(memcg, mask);
} else {
schedule();
finish_wait(&memcg_oom_waitq, &owait.wait);
}
spin_lock(&memcg_oom_lock);
if (locked)
- mem_cgroup_oom_unlock(mem);
- memcg_wakeup_oom(mem);
+ mem_cgroup_oom_unlock(memcg);
+ memcg_wakeup_oom(memcg);
spin_unlock(&memcg_oom_lock);
- mem_cgroup_unmark_under_oom(mem);
+ mem_cgroup_unmark_under_oom(memcg);
if (test_thread_flag(TIF_MEMDIE) || fatal_signal_pending(current))
return false;
/* Give chance to dying process */
- schedule_timeout(1);
+ schedule_timeout_uninterruptible(1);
return true;
}
@@ -1926,7 +1935,7 @@
void mem_cgroup_update_page_stat(struct page *page,
enum mem_cgroup_page_stat_item idx, int val)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
struct page_cgroup *pc = lookup_page_cgroup(page);
bool need_unlock = false;
unsigned long uninitialized_var(flags);
@@ -1935,16 +1944,16 @@
return;
rcu_read_lock();
- mem = pc->mem_cgroup;
- if (unlikely(!mem || !PageCgroupUsed(pc)))
+ memcg = pc->mem_cgroup;
+ if (unlikely(!memcg || !PageCgroupUsed(pc)))
goto out;
/* pc->mem_cgroup is unstable ? */
- if (unlikely(mem_cgroup_stealed(mem)) || PageTransHuge(page)) {
+ if (unlikely(mem_cgroup_stealed(memcg)) || PageTransHuge(page)) {
/* take a lock against to access pc->mem_cgroup */
move_lock_page_cgroup(pc, &flags);
need_unlock = true;
- mem = pc->mem_cgroup;
- if (!mem || !PageCgroupUsed(pc))
+ memcg = pc->mem_cgroup;
+ if (!memcg || !PageCgroupUsed(pc))
goto out;
}
@@ -1960,7 +1969,7 @@
BUG();
}
- this_cpu_add(mem->stat->count[idx], val);
+ this_cpu_add(memcg->stat->count[idx], val);
out:
if (unlikely(need_unlock))
@@ -1991,13 +2000,13 @@
* cgroup which is not current target, returns false. This stock will be
* refilled.
*/
-static bool consume_stock(struct mem_cgroup *mem)
+static bool consume_stock(struct mem_cgroup *memcg)
{
struct memcg_stock_pcp *stock;
bool ret = true;
stock = &get_cpu_var(memcg_stock);
- if (mem == stock->cached && stock->nr_pages)
+ if (memcg == stock->cached && stock->nr_pages)
stock->nr_pages--;
else /* need to call res_counter_charge */
ret = false;
@@ -2038,24 +2047,24 @@
* Cache charges(val) which is from res_counter, to local per_cpu area.
* This will be consumed by consume_stock() function, later.
*/
-static void refill_stock(struct mem_cgroup *mem, unsigned int nr_pages)
+static void refill_stock(struct mem_cgroup *memcg, unsigned int nr_pages)
{
struct memcg_stock_pcp *stock = &get_cpu_var(memcg_stock);
- if (stock->cached != mem) { /* reset if necessary */
+ if (stock->cached != memcg) { /* reset if necessary */
drain_stock(stock);
- stock->cached = mem;
+ stock->cached = memcg;
}
stock->nr_pages += nr_pages;
put_cpu_var(memcg_stock);
}
/*
- * Drains all per-CPU charge caches for given root_mem resp. subtree
+ * Drains all per-CPU charge caches for given root_memcg resp. subtree
* of the hierarchy under it. sync flag says whether we should block
* until the work is done.
*/
-static void drain_all_stock(struct mem_cgroup *root_mem, bool sync)
+static void drain_all_stock(struct mem_cgroup *root_memcg, bool sync)
{
int cpu, curcpu;
@@ -2064,12 +2073,12 @@
curcpu = get_cpu();
for_each_online_cpu(cpu) {
struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu);
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
- mem = stock->cached;
- if (!mem || !stock->nr_pages)
+ memcg = stock->cached;
+ if (!memcg || !stock->nr_pages)
continue;
- if (!mem_cgroup_same_or_subtree(root_mem, mem))
+ if (!mem_cgroup_same_or_subtree(root_memcg, memcg))
continue;
if (!test_and_set_bit(FLUSHING_CACHED_CHARGE, &stock->flags)) {
if (cpu == curcpu)
@@ -2098,23 +2107,23 @@
* expects some charges will be back to res_counter later but cannot wait for
* it.
*/
-static void drain_all_stock_async(struct mem_cgroup *root_mem)
+static void drain_all_stock_async(struct mem_cgroup *root_memcg)
{
/*
* If someone calls draining, avoid adding more kworker runs.
*/
if (!mutex_trylock(&percpu_charge_mutex))
return;
- drain_all_stock(root_mem, false);
+ drain_all_stock(root_memcg, false);
mutex_unlock(&percpu_charge_mutex);
}
/* This is a synchronous drain interface. */
-static void drain_all_stock_sync(struct mem_cgroup *root_mem)
+static void drain_all_stock_sync(struct mem_cgroup *root_memcg)
{
/* called when force_empty is called */
mutex_lock(&percpu_charge_mutex);
- drain_all_stock(root_mem, true);
+ drain_all_stock(root_memcg, true);
mutex_unlock(&percpu_charge_mutex);
}
@@ -2122,35 +2131,35 @@
* This function drains percpu counter value from DEAD cpu and
* move it to local cpu. Note that this function can be preempted.
*/
-static void mem_cgroup_drain_pcp_counter(struct mem_cgroup *mem, int cpu)
+static void mem_cgroup_drain_pcp_counter(struct mem_cgroup *memcg, int cpu)
{
int i;
- spin_lock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
for (i = 0; i < MEM_CGROUP_STAT_DATA; i++) {
- long x = per_cpu(mem->stat->count[i], cpu);
+ long x = per_cpu(memcg->stat->count[i], cpu);
- per_cpu(mem->stat->count[i], cpu) = 0;
- mem->nocpu_base.count[i] += x;
+ per_cpu(memcg->stat->count[i], cpu) = 0;
+ memcg->nocpu_base.count[i] += x;
}
for (i = 0; i < MEM_CGROUP_EVENTS_NSTATS; i++) {
- unsigned long x = per_cpu(mem->stat->events[i], cpu);
+ unsigned long x = per_cpu(memcg->stat->events[i], cpu);
- per_cpu(mem->stat->events[i], cpu) = 0;
- mem->nocpu_base.events[i] += x;
+ per_cpu(memcg->stat->events[i], cpu) = 0;
+ memcg->nocpu_base.events[i] += x;
}
/* need to clear ON_MOVE value, works as a kind of lock. */
- per_cpu(mem->stat->count[MEM_CGROUP_ON_MOVE], cpu) = 0;
- spin_unlock(&mem->pcp_counter_lock);
+ per_cpu(memcg->stat->count[MEM_CGROUP_ON_MOVE], cpu) = 0;
+ spin_unlock(&memcg->pcp_counter_lock);
}
-static void synchronize_mem_cgroup_on_move(struct mem_cgroup *mem, int cpu)
+static void synchronize_mem_cgroup_on_move(struct mem_cgroup *memcg, int cpu)
{
int idx = MEM_CGROUP_ON_MOVE;
- spin_lock(&mem->pcp_counter_lock);
- per_cpu(mem->stat->count[idx], cpu) = mem->nocpu_base.count[idx];
- spin_unlock(&mem->pcp_counter_lock);
+ spin_lock(&memcg->pcp_counter_lock);
+ per_cpu(memcg->stat->count[idx], cpu) = memcg->nocpu_base.count[idx];
+ spin_unlock(&memcg->pcp_counter_lock);
}
static int __cpuinit memcg_cpu_hotplug_callback(struct notifier_block *nb,
@@ -2188,7 +2197,7 @@
CHARGE_OOM_DIE, /* the current is killed because of OOM */
};
-static int mem_cgroup_do_charge(struct mem_cgroup *mem, gfp_t gfp_mask,
+static int mem_cgroup_do_charge(struct mem_cgroup *memcg, gfp_t gfp_mask,
unsigned int nr_pages, bool oom_check)
{
unsigned long csize = nr_pages * PAGE_SIZE;
@@ -2197,16 +2206,16 @@
unsigned long flags = 0;
int ret;
- ret = res_counter_charge(&mem->res, csize, &fail_res);
+ ret = res_counter_charge(&memcg->res, csize, &fail_res);
if (likely(!ret)) {
if (!do_swap_account)
return CHARGE_OK;
- ret = res_counter_charge(&mem->memsw, csize, &fail_res);
+ ret = res_counter_charge(&memcg->memsw, csize, &fail_res);
if (likely(!ret))
return CHARGE_OK;
- res_counter_uncharge(&mem->res, csize);
+ res_counter_uncharge(&memcg->res, csize);
mem_over_limit = mem_cgroup_from_res_counter(fail_res, memsw);
flags |= MEM_CGROUP_RECLAIM_NOSWAP;
} else
@@ -2264,12 +2273,12 @@
static int __mem_cgroup_try_charge(struct mm_struct *mm,
gfp_t gfp_mask,
unsigned int nr_pages,
- struct mem_cgroup **memcg,
+ struct mem_cgroup **ptr,
bool oom)
{
unsigned int batch = max(CHARGE_BATCH, nr_pages);
int nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
int ret;
/*
@@ -2287,17 +2296,17 @@
* thread group leader migrates. It's possible that mm is not
* set, if so charge the init_mm (happens for pagecache usage).
*/
- if (!*memcg && !mm)
+ if (!*ptr && !mm)
goto bypass;
again:
- if (*memcg) { /* css should be a valid one */
- mem = *memcg;
- VM_BUG_ON(css_is_removed(&mem->css));
- if (mem_cgroup_is_root(mem))
+ if (*ptr) { /* css should be a valid one */
+ memcg = *ptr;
+ VM_BUG_ON(css_is_removed(&memcg->css));
+ if (mem_cgroup_is_root(memcg))
goto done;
- if (nr_pages == 1 && consume_stock(mem))
+ if (nr_pages == 1 && consume_stock(memcg))
goto done;
- css_get(&mem->css);
+ css_get(&memcg->css);
} else {
struct task_struct *p;
@@ -2305,7 +2314,7 @@
p = rcu_dereference(mm->owner);
/*
* Because we don't have task_lock(), "p" can exit.
- * In that case, "mem" can point to root or p can be NULL with
+ * In that case, "memcg" can point to root or p can be NULL with
* race with swapoff. Then, we have small risk of mis-accouning.
* But such kind of mis-account by race always happens because
* we don't have cgroup_mutex(). It's overkill and we allo that
@@ -2313,12 +2322,12 @@
* (*) swapoff at el will charge against mm-struct not against
* task-struct. So, mm->owner can be NULL.
*/
- mem = mem_cgroup_from_task(p);
- if (!mem || mem_cgroup_is_root(mem)) {
+ memcg = mem_cgroup_from_task(p);
+ if (!memcg || mem_cgroup_is_root(memcg)) {
rcu_read_unlock();
goto done;
}
- if (nr_pages == 1 && consume_stock(mem)) {
+ if (nr_pages == 1 && consume_stock(memcg)) {
/*
* It seems dagerous to access memcg without css_get().
* But considering how consume_stok works, it's not
@@ -2331,7 +2340,7 @@
goto done;
}
/* after here, we may be blocked. we need to get refcnt */
- if (!css_tryget(&mem->css)) {
+ if (!css_tryget(&memcg->css)) {
rcu_read_unlock();
goto again;
}
@@ -2343,7 +2352,7 @@
/* If killed, bypass charge */
if (fatal_signal_pending(current)) {
- css_put(&mem->css);
+ css_put(&memcg->css);
goto bypass;
}
@@ -2353,43 +2362,43 @@
nr_oom_retries = MEM_CGROUP_RECLAIM_RETRIES;
}
- ret = mem_cgroup_do_charge(mem, gfp_mask, batch, oom_check);
+ ret = mem_cgroup_do_charge(memcg, gfp_mask, batch, oom_check);
switch (ret) {
case CHARGE_OK:
break;
case CHARGE_RETRY: /* not in OOM situation but retry */
batch = nr_pages;
- css_put(&mem->css);
- mem = NULL;
+ css_put(&memcg->css);
+ memcg = NULL;
goto again;
case CHARGE_WOULDBLOCK: /* !__GFP_WAIT */
- css_put(&mem->css);
+ css_put(&memcg->css);
goto nomem;
case CHARGE_NOMEM: /* OOM routine works */
if (!oom) {
- css_put(&mem->css);
+ css_put(&memcg->css);
goto nomem;
}
/* If oom, we never return -ENOMEM */
nr_oom_retries--;
break;
case CHARGE_OOM_DIE: /* Killed by OOM Killer */
- css_put(&mem->css);
+ css_put(&memcg->css);
goto bypass;
}
} while (ret != CHARGE_OK);
if (batch > nr_pages)
- refill_stock(mem, batch - nr_pages);
- css_put(&mem->css);
+ refill_stock(memcg, batch - nr_pages);
+ css_put(&memcg->css);
done:
- *memcg = mem;
+ *ptr = memcg;
return 0;
nomem:
- *memcg = NULL;
+ *ptr = NULL;
return -ENOMEM;
bypass:
- *memcg = NULL;
+ *ptr = NULL;
return 0;
}
@@ -2398,15 +2407,15 @@
* This function is for that and do uncharge, put css's refcnt.
* gotten by try_charge().
*/
-static void __mem_cgroup_cancel_charge(struct mem_cgroup *mem,
+static void __mem_cgroup_cancel_charge(struct mem_cgroup *memcg,
unsigned int nr_pages)
{
- if (!mem_cgroup_is_root(mem)) {
+ if (!mem_cgroup_is_root(memcg)) {
unsigned long bytes = nr_pages * PAGE_SIZE;
- res_counter_uncharge(&mem->res, bytes);
+ res_counter_uncharge(&memcg->res, bytes);
if (do_swap_account)
- res_counter_uncharge(&mem->memsw, bytes);
+ res_counter_uncharge(&memcg->memsw, bytes);
}
}
@@ -2431,7 +2440,7 @@
struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
struct page_cgroup *pc;
unsigned short id;
swp_entry_t ent;
@@ -2441,23 +2450,23 @@
pc = lookup_page_cgroup(page);
lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
- mem = pc->mem_cgroup;
- if (mem && !css_tryget(&mem->css))
- mem = NULL;
+ memcg = pc->mem_cgroup;
+ if (memcg && !css_tryget(&memcg->css))
+ memcg = NULL;
} else if (PageSwapCache(page)) {
ent.val = page_private(page);
id = lookup_swap_cgroup(ent);
rcu_read_lock();
- mem = mem_cgroup_lookup(id);
- if (mem && !css_tryget(&mem->css))
- mem = NULL;
+ memcg = mem_cgroup_lookup(id);
+ if (memcg && !css_tryget(&memcg->css))
+ memcg = NULL;
rcu_read_unlock();
}
unlock_page_cgroup(pc);
- return mem;
+ return memcg;
}
-static void __mem_cgroup_commit_charge(struct mem_cgroup *mem,
+static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg,
struct page *page,
unsigned int nr_pages,
struct page_cgroup *pc,
@@ -2466,14 +2475,14 @@
lock_page_cgroup(pc);
if (unlikely(PageCgroupUsed(pc))) {
unlock_page_cgroup(pc);
- __mem_cgroup_cancel_charge(mem, nr_pages);
+ __mem_cgroup_cancel_charge(memcg, nr_pages);
return;
}
/*
* we don't need page_cgroup_lock about tail pages, becase they are not
* accessed by any other context at this point.
*/
- pc->mem_cgroup = mem;
+ pc->mem_cgroup = memcg;
/*
* We access a page_cgroup asynchronously without lock_page_cgroup().
* Especially when a page_cgroup is taken from a page, pc->mem_cgroup
@@ -2496,14 +2505,14 @@
break;
}
- mem_cgroup_charge_statistics(mem, PageCgroupCache(pc), nr_pages);
+ mem_cgroup_charge_statistics(memcg, PageCgroupCache(pc), nr_pages);
unlock_page_cgroup(pc);
/*
* "charge_statistics" updated event counter. Then, check it.
* Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
* if they exceeds softlimit.
*/
- memcg_check_events(mem, page);
+ memcg_check_events(memcg, page);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -2690,7 +2699,7 @@
static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask, enum charge_type ctype)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
unsigned int nr_pages = 1;
struct page_cgroup *pc;
bool oom = true;
@@ -2709,11 +2718,11 @@
pc = lookup_page_cgroup(page);
BUG_ON(!pc); /* XXX: remove this and move pc lookup into commit */
- ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &mem, oom);
- if (ret || !mem)
+ ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom);
+ if (ret || !memcg)
return ret;
- __mem_cgroup_commit_charge(mem, page, nr_pages, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype);
return 0;
}
@@ -2742,7 +2751,7 @@
enum charge_type ctype);
static void
-__mem_cgroup_commit_charge_lrucare(struct page *page, struct mem_cgroup *mem,
+__mem_cgroup_commit_charge_lrucare(struct page *page, struct mem_cgroup *memcg,
enum charge_type ctype)
{
struct page_cgroup *pc = lookup_page_cgroup(page);
@@ -2752,7 +2761,7 @@
* LRU. Take care of it.
*/
mem_cgroup_lru_del_before_commit(page);
- __mem_cgroup_commit_charge(mem, page, 1, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype);
mem_cgroup_lru_add_after_commit(page);
return;
}
@@ -2760,7 +2769,7 @@
int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
int ret;
if (mem_cgroup_disabled())
@@ -2772,8 +2781,8 @@
mm = &init_mm;
if (page_is_file_cache(page)) {
- ret = __mem_cgroup_try_charge(mm, gfp_mask, 1, &mem, true);
- if (ret || !mem)
+ ret = __mem_cgroup_try_charge(mm, gfp_mask, 1, &memcg, true);
+ if (ret || !memcg)
return ret;
/*
@@ -2781,15 +2790,15 @@
* put that would remove them from the LRU list, make
* sure that they get relinked properly.
*/
- __mem_cgroup_commit_charge_lrucare(page, mem,
+ __mem_cgroup_commit_charge_lrucare(page, memcg,
MEM_CGROUP_CHARGE_TYPE_CACHE);
return ret;
}
/* shmem */
if (PageSwapCache(page)) {
- ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
+ ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &memcg);
if (!ret)
- __mem_cgroup_commit_charge_swapin(page, mem,
+ __mem_cgroup_commit_charge_swapin(page, memcg,
MEM_CGROUP_CHARGE_TYPE_SHMEM);
} else
ret = mem_cgroup_charge_common(page, mm, gfp_mask,
@@ -2808,7 +2817,7 @@
struct page *page,
gfp_t mask, struct mem_cgroup **ptr)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
int ret;
*ptr = NULL;
@@ -2826,12 +2835,12 @@
*/
if (!PageSwapCache(page))
goto charge_cur_mm;
- mem = try_get_mem_cgroup_from_page(page);
- if (!mem)
+ memcg = try_get_mem_cgroup_from_page(page);
+ if (!memcg)
goto charge_cur_mm;
- *ptr = mem;
+ *ptr = memcg;
ret = __mem_cgroup_try_charge(NULL, mask, 1, ptr, true);
- css_put(&mem->css);
+ css_put(&memcg->css);
return ret;
charge_cur_mm:
if (unlikely(!mm))
@@ -2891,16 +2900,16 @@
MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
-void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *mem)
+void mem_cgroup_cancel_charge_swapin(struct mem_cgroup *memcg)
{
if (mem_cgroup_disabled())
return;
- if (!mem)
+ if (!memcg)
return;
- __mem_cgroup_cancel_charge(mem, 1);
+ __mem_cgroup_cancel_charge(memcg, 1);
}
-static void mem_cgroup_do_uncharge(struct mem_cgroup *mem,
+static void mem_cgroup_do_uncharge(struct mem_cgroup *memcg,
unsigned int nr_pages,
const enum charge_type ctype)
{
@@ -2918,7 +2927,7 @@
* uncharges. Then, it's ok to ignore memcg's refcnt.
*/
if (!batch->memcg)
- batch->memcg = mem;
+ batch->memcg = memcg;
/*
* do_batch > 0 when unmapping pages or inode invalidate/truncate.
* In those cases, all pages freed continuously can be expected to be in
@@ -2938,7 +2947,7 @@
* merge a series of uncharges to an uncharge of res_counter.
* If not, we uncharge res_counter ony by one.
*/
- if (batch->memcg != mem)
+ if (batch->memcg != memcg)
goto direct_uncharge;
/* remember freed charge and uncharge it later */
batch->nr_pages++;
@@ -2946,11 +2955,11 @@
batch->memsw_nr_pages++;
return;
direct_uncharge:
- res_counter_uncharge(&mem->res, nr_pages * PAGE_SIZE);
+ res_counter_uncharge(&memcg->res, nr_pages * PAGE_SIZE);
if (uncharge_memsw)
- res_counter_uncharge(&mem->memsw, nr_pages * PAGE_SIZE);
- if (unlikely(batch->memcg != mem))
- memcg_oom_recover(mem);
+ res_counter_uncharge(&memcg->memsw, nr_pages * PAGE_SIZE);
+ if (unlikely(batch->memcg != memcg))
+ memcg_oom_recover(memcg);
return;
}
@@ -2960,7 +2969,7 @@
static struct mem_cgroup *
__mem_cgroup_uncharge_common(struct page *page, enum charge_type ctype)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
unsigned int nr_pages = 1;
struct page_cgroup *pc;
@@ -2983,7 +2992,7 @@
lock_page_cgroup(pc);
- mem = pc->mem_cgroup;
+ memcg = pc->mem_cgroup;
if (!PageCgroupUsed(pc))
goto unlock_out;
@@ -3006,7 +3015,7 @@
break;
}
- mem_cgroup_charge_statistics(mem, PageCgroupCache(pc), -nr_pages);
+ mem_cgroup_charge_statistics(memcg, PageCgroupCache(pc), -nr_pages);
ClearPageCgroupUsed(pc);
/*
@@ -3018,18 +3027,18 @@
unlock_page_cgroup(pc);
/*
- * even after unlock, we have mem->res.usage here and this memcg
+ * even after unlock, we have memcg->res.usage here and this memcg
* will never be freed.
*/
- memcg_check_events(mem, page);
+ memcg_check_events(memcg, page);
if (do_swap_account && ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT) {
- mem_cgroup_swap_statistics(mem, true);
- mem_cgroup_get(mem);
+ mem_cgroup_swap_statistics(memcg, true);
+ mem_cgroup_get(memcg);
}
- if (!mem_cgroup_is_root(mem))
- mem_cgroup_do_uncharge(mem, nr_pages, ctype);
+ if (!mem_cgroup_is_root(memcg))
+ mem_cgroup_do_uncharge(memcg, nr_pages, ctype);
- return mem;
+ return memcg;
unlock_out:
unlock_page_cgroup(pc);
@@ -3219,7 +3228,7 @@
int mem_cgroup_prepare_migration(struct page *page,
struct page *newpage, struct mem_cgroup **ptr, gfp_t gfp_mask)
{
- struct mem_cgroup *mem = NULL;
+ struct mem_cgroup *memcg = NULL;
struct page_cgroup *pc;
enum charge_type ctype;
int ret = 0;
@@ -3233,8 +3242,8 @@
pc = lookup_page_cgroup(page);
lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
- mem = pc->mem_cgroup;
- css_get(&mem->css);
+ memcg = pc->mem_cgroup;
+ css_get(&memcg->css);
/*
* At migrating an anonymous page, its mapcount goes down
* to 0 and uncharge() will be called. But, even if it's fully
@@ -3272,12 +3281,12 @@
* If the page is not charged at this point,
* we return here.
*/
- if (!mem)
+ if (!memcg)
return 0;
- *ptr = mem;
+ *ptr = memcg;
ret = __mem_cgroup_try_charge(NULL, gfp_mask, 1, ptr, false);
- css_put(&mem->css);/* drop extra refcnt */
+ css_put(&memcg->css);/* drop extra refcnt */
if (ret || *ptr == NULL) {
if (PageAnon(page)) {
lock_page_cgroup(pc);
@@ -3303,21 +3312,21 @@
ctype = MEM_CGROUP_CHARGE_TYPE_CACHE;
else
ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM;
- __mem_cgroup_commit_charge(mem, page, 1, pc, ctype);
+ __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype);
return ret;
}
/* remove redundant charge if migration failed*/
-void mem_cgroup_end_migration(struct mem_cgroup *mem,
+void mem_cgroup_end_migration(struct mem_cgroup *memcg,
struct page *oldpage, struct page *newpage, bool migration_ok)
{
struct page *used, *unused;
struct page_cgroup *pc;
- if (!mem)
+ if (!memcg)
return;
/* blocks rmdir() */
- cgroup_exclude_rmdir(&mem->css);
+ cgroup_exclude_rmdir(&memcg->css);
if (!migration_ok) {
used = oldpage;
unused = newpage;
@@ -3353,7 +3362,7 @@
* So, rmdir()->pre_destroy() can be called while we do this charge.
* In that case, we need to call pre_destroy() again. check it here.
*/
- cgroup_release_and_wakeup_rmdir(&mem->css);
+ cgroup_release_and_wakeup_rmdir(&memcg->css);
}
#ifdef CONFIG_DEBUG_VM
@@ -3432,7 +3441,7 @@
/*
* Rather than hide all in some function, I do this in
* open coded manner. You see what this really does.
- * We have to guarantee mem->res.limit < mem->memsw.limit.
+ * We have to guarantee memcg->res.limit < memcg->memsw.limit.
*/
mutex_lock(&set_limit_mutex);
memswlimit = res_counter_read_u64(&memcg->memsw, RES_LIMIT);
@@ -3494,7 +3503,7 @@
/*
* Rather than hide all in some function, I do this in
* open coded manner. You see what this really does.
- * We have to guarantee mem->res.limit < mem->memsw.limit.
+ * We have to guarantee memcg->res.limit < memcg->memsw.limit.
*/
mutex_lock(&set_limit_mutex);
memlimit = res_counter_read_u64(&memcg->res, RES_LIMIT);
@@ -3632,7 +3641,7 @@
* This routine traverse page_cgroup in given list and drop them all.
* *And* this routine doesn't reclaim page itself, just removes page_cgroup.
*/
-static int mem_cgroup_force_empty_list(struct mem_cgroup *mem,
+static int mem_cgroup_force_empty_list(struct mem_cgroup *memcg,
int node, int zid, enum lru_list lru)
{
struct zone *zone;
@@ -3643,7 +3652,7 @@
int ret = 0;
zone = &NODE_DATA(node)->node_zones[zid];
- mz = mem_cgroup_zoneinfo(mem, node, zid);
+ mz = mem_cgroup_zoneinfo(memcg, node, zid);
list = &mz->lists[lru];
loop = MEM_CGROUP_ZSTAT(mz, lru);
@@ -3670,7 +3679,7 @@
page = lookup_cgroup_page(pc);
- ret = mem_cgroup_move_parent(page, pc, mem, GFP_KERNEL);
+ ret = mem_cgroup_move_parent(page, pc, memcg, GFP_KERNEL);
if (ret == -ENOMEM)
break;
@@ -3691,14 +3700,14 @@
* make mem_cgroup's charge to be 0 if there is no task.
* This enables deleting this mem_cgroup.
*/
-static int mem_cgroup_force_empty(struct mem_cgroup *mem, bool free_all)
+static int mem_cgroup_force_empty(struct mem_cgroup *memcg, bool free_all)
{
int ret;
int node, zid, shrink;
int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
- struct cgroup *cgrp = mem->css.cgroup;
+ struct cgroup *cgrp = memcg->css.cgroup;
- css_get(&mem->css);
+ css_get(&memcg->css);
shrink = 0;
/* should free all ? */
@@ -3714,14 +3723,14 @@
goto out;
/* This is for making all *used* pages to be on LRU. */
lru_add_drain_all();
- drain_all_stock_sync(mem);
+ drain_all_stock_sync(memcg);
ret = 0;
- mem_cgroup_start_move(mem);
+ mem_cgroup_start_move(memcg);
for_each_node_state(node, N_HIGH_MEMORY) {
for (zid = 0; !ret && zid < MAX_NR_ZONES; zid++) {
enum lru_list l;
for_each_lru(l) {
- ret = mem_cgroup_force_empty_list(mem,
+ ret = mem_cgroup_force_empty_list(memcg,
node, zid, l);
if (ret)
break;
@@ -3730,16 +3739,16 @@
if (ret)
break;
}
- mem_cgroup_end_move(mem);
- memcg_oom_recover(mem);
+ mem_cgroup_end_move(memcg);
+ memcg_oom_recover(memcg);
/* it seems parent cgroup doesn't have enough mem */
if (ret == -ENOMEM)
goto try_to_free;
cond_resched();
/* "ret" should also be checked to ensure all lists are empty. */
- } while (mem->res.usage > 0 || ret);
+ } while (memcg->res.usage > 0 || ret);
out:
- css_put(&mem->css);
+ css_put(&memcg->css);
return ret;
try_to_free:
@@ -3752,14 +3761,14 @@
lru_add_drain_all();
/* try to free all pages in this cgroup */
shrink = 1;
- while (nr_retries && mem->res.usage > 0) {
+ while (nr_retries && memcg->res.usage > 0) {
int progress;
if (signal_pending(current)) {
ret = -EINTR;
goto out;
}
- progress = try_to_free_mem_cgroup_pages(mem, GFP_KERNEL,
+ progress = try_to_free_mem_cgroup_pages(memcg, GFP_KERNEL,
false);
if (!progress) {
nr_retries--;
@@ -3788,12 +3797,12 @@
u64 val)
{
int retval = 0;
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
struct cgroup *parent = cont->parent;
- struct mem_cgroup *parent_mem = NULL;
+ struct mem_cgroup *parent_memcg = NULL;
if (parent)
- parent_mem = mem_cgroup_from_cont(parent);
+ parent_memcg = mem_cgroup_from_cont(parent);
cgroup_lock();
/*
@@ -3804,10 +3813,10 @@
* For the root cgroup, parent_mem is NULL, we allow value to be
* set if there are no children.
*/
- if ((!parent_mem || !parent_mem->use_hierarchy) &&
+ if ((!parent_memcg || !parent_memcg->use_hierarchy) &&
(val == 1 || val == 0)) {
if (list_empty(&cont->children))
- mem->use_hierarchy = val;
+ memcg->use_hierarchy = val;
else
retval = -EBUSY;
} else
@@ -3818,14 +3827,14 @@
}
-static unsigned long mem_cgroup_recursive_stat(struct mem_cgroup *mem,
+static unsigned long mem_cgroup_recursive_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
struct mem_cgroup *iter;
long val = 0;
/* Per-cpu values can be negative, use a signed accumulator */
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
val += mem_cgroup_read_stat(iter, idx);
if (val < 0) /* race ? */
@@ -3833,29 +3842,29 @@
return val;
}
-static inline u64 mem_cgroup_usage(struct mem_cgroup *mem, bool swap)
+static inline u64 mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
{
u64 val;
- if (!mem_cgroup_is_root(mem)) {
+ if (!mem_cgroup_is_root(memcg)) {
if (!swap)
- return res_counter_read_u64(&mem->res, RES_USAGE);
+ return res_counter_read_u64(&memcg->res, RES_USAGE);
else
- return res_counter_read_u64(&mem->memsw, RES_USAGE);
+ return res_counter_read_u64(&memcg->memsw, RES_USAGE);
}
- val = mem_cgroup_recursive_stat(mem, MEM_CGROUP_STAT_CACHE);
- val += mem_cgroup_recursive_stat(mem, MEM_CGROUP_STAT_RSS);
+ val = mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_CACHE);
+ val += mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_RSS);
if (swap)
- val += mem_cgroup_recursive_stat(mem, MEM_CGROUP_STAT_SWAPOUT);
+ val += mem_cgroup_recursive_stat(memcg, MEM_CGROUP_STAT_SWAPOUT);
return val << PAGE_SHIFT;
}
static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
u64 val;
int type, name;
@@ -3864,15 +3873,15 @@
switch (type) {
case _MEM:
if (name == RES_USAGE)
- val = mem_cgroup_usage(mem, false);
+ val = mem_cgroup_usage(memcg, false);
else
- val = res_counter_read_u64(&mem->res, name);
+ val = res_counter_read_u64(&memcg->res, name);
break;
case _MEMSWAP:
if (name == RES_USAGE)
- val = mem_cgroup_usage(mem, true);
+ val = mem_cgroup_usage(memcg, true);
else
- val = res_counter_read_u64(&mem->memsw, name);
+ val = res_counter_read_u64(&memcg->memsw, name);
break;
default:
BUG();
@@ -3960,24 +3969,24 @@
static int mem_cgroup_reset(struct cgroup *cont, unsigned int event)
{
- struct mem_cgroup *mem;
+ struct mem_cgroup *memcg;
int type, name;
- mem = mem_cgroup_from_cont(cont);
+ memcg = mem_cgroup_from_cont(cont);
type = MEMFILE_TYPE(event);
name = MEMFILE_ATTR(event);
switch (name) {
case RES_MAX_USAGE:
if (type == _MEM)
- res_counter_reset_max(&mem->res);
+ res_counter_reset_max(&memcg->res);
else
- res_counter_reset_max(&mem->memsw);
+ res_counter_reset_max(&memcg->memsw);
break;
case RES_FAILCNT:
if (type == _MEM)
- res_counter_reset_failcnt(&mem->res);
+ res_counter_reset_failcnt(&memcg->res);
else
- res_counter_reset_failcnt(&mem->memsw);
+ res_counter_reset_failcnt(&memcg->memsw);
break;
}
@@ -3994,7 +4003,7 @@
static int mem_cgroup_move_charge_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
if (val >= (1 << NR_MOVE_TYPE))
return -EINVAL;
@@ -4004,7 +4013,7 @@
* inconsistent.
*/
cgroup_lock();
- mem->move_charge_at_immigrate = val;
+ memcg->move_charge_at_immigrate = val;
cgroup_unlock();
return 0;
@@ -4061,49 +4070,49 @@
static void
-mem_cgroup_get_local_stat(struct mem_cgroup *mem, struct mcs_total_stat *s)
+mem_cgroup_get_local_stat(struct mem_cgroup *memcg, struct mcs_total_stat *s)
{
s64 val;
/* per cpu stat */
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_CACHE);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_CACHE);
s->stat[MCS_CACHE] += val * PAGE_SIZE;
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_RSS);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_RSS);
s->stat[MCS_RSS] += val * PAGE_SIZE;
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_FILE_MAPPED);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_FILE_MAPPED);
s->stat[MCS_FILE_MAPPED] += val * PAGE_SIZE;
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGPGIN);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGPGIN);
s->stat[MCS_PGPGIN] += val;
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGPGOUT);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGPGOUT);
s->stat[MCS_PGPGOUT] += val;
if (do_swap_account) {
- val = mem_cgroup_read_stat(mem, MEM_CGROUP_STAT_SWAPOUT);
+ val = mem_cgroup_read_stat(memcg, MEM_CGROUP_STAT_SWAPOUT);
s->stat[MCS_SWAP] += val * PAGE_SIZE;
}
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGFAULT);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGFAULT);
s->stat[MCS_PGFAULT] += val;
- val = mem_cgroup_read_events(mem, MEM_CGROUP_EVENTS_PGMAJFAULT);
+ val = mem_cgroup_read_events(memcg, MEM_CGROUP_EVENTS_PGMAJFAULT);
s->stat[MCS_PGMAJFAULT] += val;
/* per zone stat */
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_INACTIVE_ANON));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_ANON));
s->stat[MCS_INACTIVE_ANON] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_ANON));
s->stat[MCS_ACTIVE_ANON] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_INACTIVE_FILE));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_INACTIVE_FILE));
s->stat[MCS_INACTIVE_FILE] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_FILE));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_ACTIVE_FILE));
s->stat[MCS_ACTIVE_FILE] += val * PAGE_SIZE;
- val = mem_cgroup_nr_lru_pages(mem, BIT(LRU_UNEVICTABLE));
+ val = mem_cgroup_nr_lru_pages(memcg, BIT(LRU_UNEVICTABLE));
s->stat[MCS_UNEVICTABLE] += val * PAGE_SIZE;
}
static void
-mem_cgroup_get_total_stat(struct mem_cgroup *mem, struct mcs_total_stat *s)
+mem_cgroup_get_total_stat(struct mem_cgroup *memcg, struct mcs_total_stat *s)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
mem_cgroup_get_local_stat(iter, s);
}
@@ -4189,8 +4198,6 @@
}
#ifdef CONFIG_DEBUG_VM
- cb->fill(cb, "inactive_ratio", calc_inactive_ratio(mem_cont, NULL));
-
{
int nid, zid;
struct mem_cgroup_per_zone *mz;
@@ -4327,20 +4334,20 @@
return _a->threshold - _b->threshold;
}
-static int mem_cgroup_oom_notify_cb(struct mem_cgroup *mem)
+static int mem_cgroup_oom_notify_cb(struct mem_cgroup *memcg)
{
struct mem_cgroup_eventfd_list *ev;
- list_for_each_entry(ev, &mem->oom_notify, list)
+ list_for_each_entry(ev, &memcg->oom_notify, list)
eventfd_signal(ev->eventfd, 1);
return 0;
}
-static void mem_cgroup_oom_notify(struct mem_cgroup *mem)
+static void mem_cgroup_oom_notify(struct mem_cgroup *memcg)
{
struct mem_cgroup *iter;
- for_each_mem_cgroup_tree(iter, mem)
+ for_each_mem_cgroup_tree(iter, memcg)
mem_cgroup_oom_notify_cb(iter);
}
@@ -4530,7 +4537,7 @@
static void mem_cgroup_oom_unregister_event(struct cgroup *cgrp,
struct cftype *cft, struct eventfd_ctx *eventfd)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup_eventfd_list *ev, *tmp;
int type = MEMFILE_TYPE(cft->private);
@@ -4538,7 +4545,7 @@
spin_lock(&memcg_oom_lock);
- list_for_each_entry_safe(ev, tmp, &mem->oom_notify, list) {
+ list_for_each_entry_safe(ev, tmp, &memcg->oom_notify, list) {
if (ev->eventfd == eventfd) {
list_del(&ev->list);
kfree(ev);
@@ -4551,11 +4558,11 @@
static int mem_cgroup_oom_control_read(struct cgroup *cgrp,
struct cftype *cft, struct cgroup_map_cb *cb)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
- cb->fill(cb, "oom_kill_disable", mem->oom_kill_disable);
+ cb->fill(cb, "oom_kill_disable", memcg->oom_kill_disable);
- if (atomic_read(&mem->under_oom))
+ if (atomic_read(&memcg->under_oom))
cb->fill(cb, "under_oom", 1);
else
cb->fill(cb, "under_oom", 0);
@@ -4565,7 +4572,7 @@
static int mem_cgroup_oom_control_write(struct cgroup *cgrp,
struct cftype *cft, u64 val)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
struct mem_cgroup *parent;
/* cannot set to root cgroup and only 0 and 1 are allowed */
@@ -4577,13 +4584,13 @@
cgroup_lock();
/* oom-kill-disable is a flag for subhierarchy. */
if ((parent->use_hierarchy) ||
- (mem->use_hierarchy && !list_empty(&cgrp->children))) {
+ (memcg->use_hierarchy && !list_empty(&cgrp->children))) {
cgroup_unlock();
return -EINVAL;
}
- mem->oom_kill_disable = val;
+ memcg->oom_kill_disable = val;
if (!val)
- memcg_oom_recover(mem);
+ memcg_oom_recover(memcg);
cgroup_unlock();
return 0;
}
@@ -4719,7 +4726,7 @@
}
#endif
-static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node)
+static int alloc_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node)
{
struct mem_cgroup_per_node *pn;
struct mem_cgroup_per_zone *mz;
@@ -4739,21 +4746,21 @@
if (!pn)
return 1;
- mem->info.nodeinfo[node] = pn;
for (zone = 0; zone < MAX_NR_ZONES; zone++) {
mz = &pn->zoneinfo[zone];
for_each_lru(l)
INIT_LIST_HEAD(&mz->lists[l]);
mz->usage_in_excess = 0;
mz->on_tree = false;
- mz->mem = mem;
+ mz->mem = memcg;
}
+ memcg->info.nodeinfo[node] = pn;
return 0;
}
-static void free_mem_cgroup_per_zone_info(struct mem_cgroup *mem, int node)
+static void free_mem_cgroup_per_zone_info(struct mem_cgroup *memcg, int node)
{
- kfree(mem->info.nodeinfo[node]);
+ kfree(memcg->info.nodeinfo[node]);
}
static struct mem_cgroup *mem_cgroup_alloc(void)
@@ -4795,51 +4802,51 @@
* Removal of cgroup itself succeeds regardless of refs from swap.
*/
-static void __mem_cgroup_free(struct mem_cgroup *mem)
+static void __mem_cgroup_free(struct mem_cgroup *memcg)
{
int node;
- mem_cgroup_remove_from_trees(mem);
- free_css_id(&mem_cgroup_subsys, &mem->css);
+ mem_cgroup_remove_from_trees(memcg);
+ free_css_id(&mem_cgroup_subsys, &memcg->css);
for_each_node_state(node, N_POSSIBLE)
- free_mem_cgroup_per_zone_info(mem, node);
+ free_mem_cgroup_per_zone_info(memcg, node);
- free_percpu(mem->stat);
+ free_percpu(memcg->stat);
if (sizeof(struct mem_cgroup) < PAGE_SIZE)
- kfree(mem);
+ kfree(memcg);
else
- vfree(mem);
+ vfree(memcg);
}
-static void mem_cgroup_get(struct mem_cgroup *mem)
+static void mem_cgroup_get(struct mem_cgroup *memcg)
{
- atomic_inc(&mem->refcnt);
+ atomic_inc(&memcg->refcnt);
}
-static void __mem_cgroup_put(struct mem_cgroup *mem, int count)
+static void __mem_cgroup_put(struct mem_cgroup *memcg, int count)
{
- if (atomic_sub_and_test(count, &mem->refcnt)) {
- struct mem_cgroup *parent = parent_mem_cgroup(mem);
- __mem_cgroup_free(mem);
+ if (atomic_sub_and_test(count, &memcg->refcnt)) {
+ struct mem_cgroup *parent = parent_mem_cgroup(memcg);
+ __mem_cgroup_free(memcg);
if (parent)
mem_cgroup_put(parent);
}
}
-static void mem_cgroup_put(struct mem_cgroup *mem)
+static void mem_cgroup_put(struct mem_cgroup *memcg)
{
- __mem_cgroup_put(mem, 1);
+ __mem_cgroup_put(memcg, 1);
}
/*
* Returns the parent mem_cgroup in memcgroup hierarchy with hierarchy enabled.
*/
-static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem)
+static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *memcg)
{
- if (!mem->res.parent)
+ if (!memcg->res.parent)
return NULL;
- return mem_cgroup_from_res_counter(mem->res.parent, res);
+ return mem_cgroup_from_res_counter(memcg->res.parent, res);
}
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -4882,16 +4889,16 @@
static struct cgroup_subsys_state * __ref
mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
{
- struct mem_cgroup *mem, *parent;
+ struct mem_cgroup *memcg, *parent;
long error = -ENOMEM;
int node;
- mem = mem_cgroup_alloc();
- if (!mem)
+ memcg = mem_cgroup_alloc();
+ if (!memcg)
return ERR_PTR(error);
for_each_node_state(node, N_POSSIBLE)
- if (alloc_mem_cgroup_per_zone_info(mem, node))
+ if (alloc_mem_cgroup_per_zone_info(memcg, node))
goto free_out;
/* root ? */
@@ -4899,7 +4906,7 @@
int cpu;
enable_swap_cgroup();
parent = NULL;
- root_mem_cgroup = mem;
+ root_mem_cgroup = memcg;
if (mem_cgroup_soft_limit_tree_init())
goto free_out;
for_each_possible_cpu(cpu) {
@@ -4910,13 +4917,13 @@
hotcpu_notifier(memcg_cpu_hotplug_callback, 0);
} else {
parent = mem_cgroup_from_cont(cont->parent);
- mem->use_hierarchy = parent->use_hierarchy;
- mem->oom_kill_disable = parent->oom_kill_disable;
+ memcg->use_hierarchy = parent->use_hierarchy;
+ memcg->oom_kill_disable = parent->oom_kill_disable;
}
if (parent && parent->use_hierarchy) {
- res_counter_init(&mem->res, &parent->res);
- res_counter_init(&mem->memsw, &parent->memsw);
+ res_counter_init(&memcg->res, &parent->res);
+ res_counter_init(&memcg->memsw, &parent->memsw);
/*
* We increment refcnt of the parent to ensure that we can
* safely access it on res_counter_charge/uncharge.
@@ -4925,21 +4932,21 @@
*/
mem_cgroup_get(parent);
} else {
- res_counter_init(&mem->res, NULL);
- res_counter_init(&mem->memsw, NULL);
+ res_counter_init(&memcg->res, NULL);
+ res_counter_init(&memcg->memsw, NULL);
}
- mem->last_scanned_child = 0;
- mem->last_scanned_node = MAX_NUMNODES;
- INIT_LIST_HEAD(&mem->oom_notify);
+ memcg->last_scanned_child = 0;
+ memcg->last_scanned_node = MAX_NUMNODES;
+ INIT_LIST_HEAD(&memcg->oom_notify);
if (parent)
- mem->swappiness = mem_cgroup_swappiness(parent);
- atomic_set(&mem->refcnt, 1);
- mem->move_charge_at_immigrate = 0;
- mutex_init(&mem->thresholds_lock);
- return &mem->css;
+ memcg->swappiness = mem_cgroup_swappiness(parent);
+ atomic_set(&memcg->refcnt, 1);
+ memcg->move_charge_at_immigrate = 0;
+ mutex_init(&memcg->thresholds_lock);
+ return &memcg->css;
free_out:
- __mem_cgroup_free(mem);
+ __mem_cgroup_free(memcg);
root_mem_cgroup = NULL;
return ERR_PTR(error);
}
@@ -4947,17 +4954,17 @@
static int mem_cgroup_pre_destroy(struct cgroup_subsys *ss,
struct cgroup *cont)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
- return mem_cgroup_force_empty(mem, false);
+ return mem_cgroup_force_empty(memcg, false);
}
static void mem_cgroup_destroy(struct cgroup_subsys *ss,
struct cgroup *cont)
{
- struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cont);
- mem_cgroup_put(mem);
+ mem_cgroup_put(memcg);
}
static int mem_cgroup_populate(struct cgroup_subsys *ss,
@@ -4980,9 +4987,9 @@
{
int ret = 0;
int batch_count = PRECHARGE_COUNT_AT_ONCE;
- struct mem_cgroup *mem = mc.to;
+ struct mem_cgroup *memcg = mc.to;
- if (mem_cgroup_is_root(mem)) {
+ if (mem_cgroup_is_root(memcg)) {
mc.precharge += count;
/* we don't need css_get for root */
return ret;
@@ -4991,16 +4998,16 @@
if (count > 1) {
struct res_counter *dummy;
/*
- * "mem" cannot be under rmdir() because we've already checked
+ * "memcg" cannot be under rmdir() because we've already checked
* by cgroup_lock_live_cgroup() that it is not removed and we
* are still under the same cgroup_mutex. So we can postpone
* css_get().
*/
- if (res_counter_charge(&mem->res, PAGE_SIZE * count, &dummy))
+ if (res_counter_charge(&memcg->res, PAGE_SIZE * count, &dummy))
goto one_by_one;
- if (do_swap_account && res_counter_charge(&mem->memsw,
+ if (do_swap_account && res_counter_charge(&memcg->memsw,
PAGE_SIZE * count, &dummy)) {
- res_counter_uncharge(&mem->res, PAGE_SIZE * count);
+ res_counter_uncharge(&memcg->res, PAGE_SIZE * count);
goto one_by_one;
}
mc.precharge += count;
@@ -5017,8 +5024,9 @@
batch_count = PRECHARGE_COUNT_AT_ONCE;
cond_resched();
}
- ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, 1, &mem, false);
- if (ret || !mem)
+ ret = __mem_cgroup_try_charge(NULL,
+ GFP_KERNEL, 1, &memcg, false);
+ if (ret || !memcg)
/* mem_cgroup_clear_mc() will do uncharge later */
return -ENOMEM;
mc.precharge++;
@@ -5292,13 +5300,13 @@
struct task_struct *p)
{
int ret = 0;
- struct mem_cgroup *mem = mem_cgroup_from_cont(cgroup);
+ struct mem_cgroup *memcg = mem_cgroup_from_cont(cgroup);
- if (mem->move_charge_at_immigrate) {
+ if (memcg->move_charge_at_immigrate) {
struct mm_struct *mm;
struct mem_cgroup *from = mem_cgroup_from_task(p);
- VM_BUG_ON(from == mem);
+ VM_BUG_ON(from == memcg);
mm = get_task_mm(p);
if (!mm)
@@ -5313,7 +5321,7 @@
mem_cgroup_start_move(from);
spin_lock(&mc.lock);
mc.from = from;
- mc.to = mem;
+ mc.to = memcg;
spin_unlock(&mc.lock);
/* We set mc.moving_task later */
diff --git a/mm/memory.c b/mm/memory.c
index a56e3ba..b2b8731 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1503,7 +1503,7 @@
}
if (flags & FOLL_GET)
- get_page(page);
+ get_page_foll(page);
if (flags & FOLL_TOUCH) {
if ((flags & FOLL_WRITE) &&
!pte_dirty(pte) && !PageDirty(page))
diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c
index 6bdc67d..2d123f9 100644
--- a/mm/page_cgroup.c
+++ b/mm/page_cgroup.c
@@ -133,10 +133,13 @@
static void *__meminit alloc_page_cgroup(size_t size, int nid)
{
void *addr = NULL;
+ gfp_t flags = GFP_KERNEL | __GFP_NOWARN;
- addr = alloc_pages_exact_nid(nid, size, GFP_KERNEL | __GFP_NOWARN);
- if (addr)
+ addr = alloc_pages_exact_nid(nid, size, flags);
+ if (addr) {
+ kmemleak_alloc(addr, size, 1, flags);
return addr;
+ }
if (node_state(nid, N_HIGH_MEMORY))
addr = vmalloc_node(size, nid);
@@ -357,7 +360,7 @@
spinlock_t lock;
};
-struct swap_cgroup_ctrl swap_cgroup_ctrl[MAX_SWAPFILES];
+static struct swap_cgroup_ctrl swap_cgroup_ctrl[MAX_SWAPFILES];
struct swap_cgroup {
unsigned short id;
diff --git a/mm/shmem.c b/mm/shmem.c
index fa4fa6c..45b9acb 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2503,7 +2503,7 @@
d_instantiate(path.dentry, inode);
inode->i_size = size;
- inode->i_nlink = 0; /* It is unlinked */
+ clear_nlink(inode); /* It is unlinked */
#ifndef CONFIG_MMU
error = ramfs_nommu_expand_for_mapping(inode, size);
if (error)
diff --git a/mm/swap.c b/mm/swap.c
index 3a442f1..87627f1 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -78,39 +78,22 @@
{
if (unlikely(PageTail(page))) {
/* __split_huge_page_refcount can run under us */
- struct page *page_head = page->first_page;
- smp_rmb();
- /*
- * If PageTail is still set after smp_rmb() we can be sure
- * that the page->first_page we read wasn't a dangling pointer.
- * See __split_huge_page_refcount() smp_wmb().
- */
- if (likely(PageTail(page) && get_page_unless_zero(page_head))) {
+ struct page *page_head = compound_trans_head(page);
+
+ if (likely(page != page_head &&
+ get_page_unless_zero(page_head))) {
unsigned long flags;
/*
- * Verify that our page_head wasn't converted
- * to a a regular page before we got a
- * reference on it.
+ * page_head wasn't a dangling pointer but it
+ * may not be a head page anymore by the time
+ * we obtain the lock. That is ok as long as it
+ * can't be freed from under us.
*/
- if (unlikely(!PageHead(page_head))) {
- /* PageHead is cleared after PageTail */
- smp_rmb();
- VM_BUG_ON(PageTail(page));
- goto out_put_head;
- }
- /*
- * Only run compound_lock on a valid PageHead,
- * after having it pinned with
- * get_page_unless_zero() above.
- */
- smp_mb();
- /* page_head wasn't a dangling pointer */
flags = compound_lock_irqsave(page_head);
if (unlikely(!PageTail(page))) {
/* __split_huge_page_refcount run before us */
compound_unlock_irqrestore(page_head, flags);
VM_BUG_ON(PageHead(page_head));
- out_put_head:
if (put_page_testzero(page_head))
__put_single_page(page_head);
out_put_single:
@@ -121,16 +104,17 @@
VM_BUG_ON(page_head != page->first_page);
/*
* We can release the refcount taken by
- * get_page_unless_zero now that
- * split_huge_page_refcount is blocked on the
- * compound_lock.
+ * get_page_unless_zero() now that
+ * __split_huge_page_refcount() is blocked on
+ * the compound_lock.
*/
if (put_page_testzero(page_head))
VM_BUG_ON(1);
/* __split_huge_page_refcount will wait now */
- VM_BUG_ON(atomic_read(&page->_count) <= 0);
- atomic_dec(&page->_count);
+ VM_BUG_ON(page_mapcount(page) <= 0);
+ atomic_dec(&page->_mapcount);
VM_BUG_ON(atomic_read(&page_head->_count) <= 0);
+ VM_BUG_ON(atomic_read(&page->_count) != 0);
compound_unlock_irqrestore(page_head, flags);
if (put_page_testzero(page_head)) {
if (PageHead(page_head))
@@ -160,6 +144,45 @@
}
EXPORT_SYMBOL(put_page);
+/*
+ * This function is exported but must not be called by anything other
+ * than get_page(). It implements the slow path of get_page().
+ */
+bool __get_page_tail(struct page *page)
+{
+ /*
+ * This takes care of get_page() if run on a tail page
+ * returned by one of the get_user_pages/follow_page variants.
+ * get_user_pages/follow_page itself doesn't need the compound
+ * lock because it runs __get_page_tail_foll() under the
+ * proper PT lock that already serializes against
+ * split_huge_page().
+ */
+ unsigned long flags;
+ bool got = false;
+ struct page *page_head = compound_trans_head(page);
+
+ if (likely(page != page_head && get_page_unless_zero(page_head))) {
+ /*
+ * page_head wasn't a dangling pointer but it
+ * may not be a head page anymore by the time
+ * we obtain the lock. That is ok as long as it
+ * can't be freed from under us.
+ */
+ flags = compound_lock_irqsave(page_head);
+ /* here __split_huge_page_refcount won't run anymore */
+ if (likely(PageTail(page))) {
+ __get_page_tail_foll(page, false);
+ got = true;
+ }
+ compound_unlock_irqrestore(page_head, flags);
+ if (unlikely(!got))
+ put_page(page_head);
+ }
+ return got;
+}
+EXPORT_SYMBOL(__get_page_tail);
+
/**
* put_pages_list() - release a list of pages
* @pages: list of pages threaded on page->lru
diff --git a/mm/vmscan.c b/mm/vmscan.c
index a90c603..132d1dd 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1767,7 +1767,7 @@
if (scanning_global_lru(sc))
low = inactive_anon_is_low_global(zone);
else
- low = mem_cgroup_inactive_anon_is_low(sc->mem_cgroup);
+ low = mem_cgroup_inactive_anon_is_low(sc->mem_cgroup, zone);
return low;
}
#else
@@ -1810,7 +1810,7 @@
if (scanning_global_lru(sc))
low = inactive_file_is_low_global(zone);
else
- low = mem_cgroup_inactive_file_is_low(sc->mem_cgroup);
+ low = mem_cgroup_inactive_file_is_low(sc->mem_cgroup, zone);
return low;
}
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index c8cf939..bc25286 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -470,10 +470,12 @@
{
struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
- if (change & IFF_ALLMULTI)
- dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
- if (change & IFF_PROMISC)
- dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
+ if (dev->flags & IFF_UP) {
+ if (change & IFF_ALLMULTI)
+ dev_set_allmulti(real_dev, dev->flags & IFF_ALLMULTI ? 1 : -1);
+ if (change & IFF_PROMISC)
+ dev_set_promiscuity(real_dev, dev->flags & IFF_PROMISC ? 1 : -1);
+ }
}
static void vlan_dev_set_rx_mode(struct net_device *vlan_dev)
diff --git a/net/bridge/netfilter/ebt_ulog.c b/net/bridge/netfilter/ebt_ulog.c
index bf2a333..5449294 100644
--- a/net/bridge/netfilter/ebt_ulog.c
+++ b/net/bridge/netfilter/ebt_ulog.c
@@ -102,16 +102,15 @@
unsigned int n;
n = max(size, nlbufsiz);
- skb = alloc_skb(n, GFP_ATOMIC);
+ skb = alloc_skb(n, GFP_ATOMIC | __GFP_NOWARN);
if (!skb) {
- pr_debug("cannot alloc whole buffer of size %ub!\n", n);
if (n > size) {
/* try to allocate only as much as we need for
* current packet */
skb = alloc_skb(size, GFP_ATOMIC);
if (!skb)
- pr_debug("cannot even allocate "
- "buffer of size %ub\n", size);
+ pr_debug("cannot even allocate buffer of size %ub\n",
+ size);
}
}
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 909ecb3..039d51e 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -872,12 +872,8 @@
now = jiffies;
next = now + HZ;
- if (!(state & NUD_IN_TIMER)) {
-#ifndef CONFIG_SMP
- printk(KERN_WARNING "neigh: timer & !nud_in_timer\n");
-#endif
+ if (!(state & NUD_IN_TIMER))
goto out;
- }
if (state & NUD_REACHABLE) {
if (time_before_eq(now,
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index ca4db40..18a3ceb 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -189,6 +189,7 @@
* aligned memory blocks, unless SLUB/SLAB debug is enabled.
* Both skb->head and skb_shared_info are cache line aligned.
*/
+ size = SKB_DATA_ALIGN(size);
size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
data = kmalloc_node_track_caller(size, gfp_mask, node);
if (!data)
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 332639b..90a919a 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -433,6 +433,7 @@
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
return NULL;
put_and_exit:
+ bh_unlock_sock(newsk);
sock_put(newsk);
goto exit;
}
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index db8d22d..a639967 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -395,7 +395,6 @@
config = clusterip_config_init(cipinfo,
e->ip.dst.s_addr, dev);
if (!config) {
- pr_info("cannot allocate config\n");
dev_put(dev);
return -ENOMEM;
}
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index 446e0f4..b550815 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -135,10 +135,8 @@
* due to slab allocator restrictions */
n = max(size, nlbufsiz);
- skb = alloc_skb(n, GFP_ATOMIC);
+ skb = alloc_skb(n, GFP_ATOMIC | __GFP_NOWARN);
if (!skb) {
- pr_debug("cannot alloc whole buffer %ub!\n", n);
-
if (n > size) {
/* try to allocate only as much as we need for
* current packet */
diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index d1cb412..2133c30 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -400,11 +400,8 @@
*len = 0;
*octets = kmalloc(eoc - ctx->pointer, GFP_ATOMIC);
- if (*octets == NULL) {
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
+ if (*octets == NULL)
return 0;
- }
ptr = *octets;
while (ctx->pointer < eoc) {
@@ -451,11 +448,8 @@
return 0;
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
- if (*oid == NULL) {
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
+ if (*oid == NULL)
return 0;
- }
optr = *oid;
@@ -728,8 +722,6 @@
*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
if (*obj == NULL) {
kfree(id);
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
return 0;
}
(*obj)->syntax.l[0] = l;
@@ -744,8 +736,6 @@
if (*obj == NULL) {
kfree(p);
kfree(id);
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
return 0;
}
memcpy((*obj)->syntax.c, p, len);
@@ -759,8 +749,6 @@
*obj = kmalloc(sizeof(struct snmp_object), GFP_ATOMIC);
if (*obj == NULL) {
kfree(id);
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
return 0;
}
if (!asn1_null_decode(ctx, end)) {
@@ -780,8 +768,6 @@
if (*obj == NULL) {
kfree(lp);
kfree(id);
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
return 0;
}
memcpy((*obj)->syntax.ul, lp, len);
@@ -801,8 +787,6 @@
if (*obj == NULL) {
kfree(p);
kfree(id);
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
return 0;
}
memcpy((*obj)->syntax.uc, p, len);
@@ -819,8 +803,6 @@
*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
if (*obj == NULL) {
kfree(id);
- if (net_ratelimit())
- pr_notice("OOM in bsalg (%d)\n", __LINE__);
return 0;
}
(*obj)->syntax.ul[0] = ul;
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 0ea10ee..a744315 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1510,6 +1510,7 @@
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_LISTENDROPS);
return NULL;
put_and_exit:
+ bh_unlock_sock(newsk);
sock_put(newsk);
goto exit;
}
@@ -2339,7 +2340,7 @@
}
}
-static int tcp_seq_open(struct inode *inode, struct file *file)
+int tcp_seq_open(struct inode *inode, struct file *file)
{
struct tcp_seq_afinfo *afinfo = PDE(inode)->data;
struct tcp_iter_state *s;
@@ -2355,23 +2356,19 @@
s->last_pos = 0;
return 0;
}
+EXPORT_SYMBOL(tcp_seq_open);
int tcp_proc_register(struct net *net, struct tcp_seq_afinfo *afinfo)
{
int rc = 0;
struct proc_dir_entry *p;
- afinfo->seq_fops.open = tcp_seq_open;
- afinfo->seq_fops.read = seq_read;
- afinfo->seq_fops.llseek = seq_lseek;
- afinfo->seq_fops.release = seq_release_net;
-
afinfo->seq_ops.start = tcp_seq_start;
afinfo->seq_ops.next = tcp_seq_next;
afinfo->seq_ops.stop = tcp_seq_stop;
p = proc_create_data(afinfo->name, S_IRUGO, net->proc_net,
- &afinfo->seq_fops, afinfo);
+ afinfo->seq_fops, afinfo);
if (!p)
rc = -ENOMEM;
return rc;
@@ -2520,12 +2517,18 @@
return 0;
}
+static const struct file_operations tcp_afinfo_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = tcp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net
+};
+
static struct tcp_seq_afinfo tcp4_seq_afinfo = {
.name = "tcp",
.family = AF_INET,
- .seq_fops = {
- .owner = THIS_MODULE,
- },
+ .seq_fops = &tcp_afinfo_seq_fops,
.seq_ops = {
.show = tcp4_seq_show,
},
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index ebaa96b..ab0966d 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1397,6 +1397,8 @@
nf_reset(skb);
if (up->encap_type) {
+ int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
+
/*
* This is an encapsulation socket so pass the skb to
* the socket's udp_encap_rcv() hook. Otherwise, just
@@ -1409,11 +1411,11 @@
*/
/* if we're overly short, let UDP handle it */
- if (skb->len > sizeof(struct udphdr) &&
- up->encap_rcv != NULL) {
+ encap_rcv = ACCESS_ONCE(up->encap_rcv);
+ if (skb->len > sizeof(struct udphdr) && encap_rcv != NULL) {
int ret;
- ret = (*up->encap_rcv)(sk, skb);
+ ret = encap_rcv(sk, skb);
if (ret <= 0) {
UDP_INC_STATS_BH(sock_net(sk),
UDP_MIB_INDATAGRAMS,
@@ -2037,7 +2039,7 @@
spin_unlock_bh(&state->udp_table->hash[state->bucket].lock);
}
-static int udp_seq_open(struct inode *inode, struct file *file)
+int udp_seq_open(struct inode *inode, struct file *file)
{
struct udp_seq_afinfo *afinfo = PDE(inode)->data;
struct udp_iter_state *s;
@@ -2053,6 +2055,7 @@
s->udp_table = afinfo->udp_table;
return err;
}
+EXPORT_SYMBOL(udp_seq_open);
/* ------------------------------------------------------------------------ */
int udp_proc_register(struct net *net, struct udp_seq_afinfo *afinfo)
@@ -2060,17 +2063,12 @@
struct proc_dir_entry *p;
int rc = 0;
- afinfo->seq_fops.open = udp_seq_open;
- afinfo->seq_fops.read = seq_read;
- afinfo->seq_fops.llseek = seq_lseek;
- afinfo->seq_fops.release = seq_release_net;
-
afinfo->seq_ops.start = udp_seq_start;
afinfo->seq_ops.next = udp_seq_next;
afinfo->seq_ops.stop = udp_seq_stop;
p = proc_create_data(afinfo->name, S_IRUGO, net->proc_net,
- &afinfo->seq_fops, afinfo);
+ afinfo->seq_fops, afinfo);
if (!p)
rc = -ENOMEM;
return rc;
@@ -2120,14 +2118,20 @@
return 0;
}
+static const struct file_operations udp_afinfo_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = udp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net
+};
+
/* ------------------------------------------------------------------------ */
static struct udp_seq_afinfo udp4_seq_afinfo = {
.name = "udp",
.family = AF_INET,
.udp_table = &udp_table,
- .seq_fops = {
- .owner = THIS_MODULE,
- },
+ .seq_fops = &udp_afinfo_seq_fops,
.seq_ops = {
.show = udp4_seq_show,
},
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index aee9963..08383eb 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -71,13 +71,20 @@
};
#ifdef CONFIG_PROC_FS
+
+static const struct file_operations udplite_afinfo_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = udp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net
+};
+
static struct udp_seq_afinfo udplite4_seq_afinfo = {
.name = "udplite",
.family = AF_INET,
.udp_table = &udplite_table,
- .seq_fops = {
- .owner = THIS_MODULE,
- },
+ .seq_fops = &udplite_afinfo_seq_fops,
.seq_ops = {
.show = udp4_seq_show,
},
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 30fcee4..8992cf6 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -100,9 +100,16 @@
.pinet6 = (struct ipv6_pinfo *) &fake_pinfo,
};
const void *sk = strict ? &fake_sk : NULL;
+ struct dst_entry *result;
+ int err;
- *dst = ip6_route_output(net, sk, &fl->u.ip6);
- return (*dst)->error;
+ result = ip6_route_output(net, sk, &fl->u.ip6);
+ err = result->error;
+ if (err)
+ dst_release(result);
+ else
+ *dst = result;
+ return err;
}
__sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook,
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index e8762c7..38f00b0 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -182,7 +182,6 @@
return container_of(q, struct nf_ct_frag6_queue, q);
oom:
- pr_debug("Can't alloc new queue\n");
return NULL;
}
@@ -370,10 +369,10 @@
struct sk_buff *clone;
int i, plen = 0;
- if ((clone = alloc_skb(0, GFP_ATOMIC)) == NULL) {
- pr_debug("Can't alloc skb\n");
+ clone = alloc_skb(0, GFP_ATOMIC);
+ if (clone == NULL)
goto out_oom;
- }
+
clone->next = head->next;
head->next = clone;
skb_shinfo(clone)->frag_list = skb_shinfo(head)->frag_list;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 10b2b31..36131d1 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -2161,12 +2161,18 @@
return 0;
}
+static const struct file_operations tcp6_afinfo_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = tcp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net
+};
+
static struct tcp_seq_afinfo tcp6_seq_afinfo = {
.name = "tcp6",
.family = AF_INET6,
- .seq_fops = {
- .owner = THIS_MODULE,
- },
+ .seq_fops = &tcp6_afinfo_seq_fops,
.seq_ops = {
.show = tcp6_seq_show,
},
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index f4ca0a5..846f475 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1424,13 +1424,19 @@
return 0;
}
+static const struct file_operations udp6_afinfo_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = udp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net
+};
+
static struct udp_seq_afinfo udp6_seq_afinfo = {
.name = "udp6",
.family = AF_INET6,
.udp_table = &udp_table,
- .seq_fops = {
- .owner = THIS_MODULE,
- },
+ .seq_fops = &udp6_afinfo_seq_fops,
.seq_ops = {
.show = udp6_seq_show,
},
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index 986c4de..8889aa2 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -93,13 +93,20 @@
}
#ifdef CONFIG_PROC_FS
+
+static const struct file_operations udplite6_afinfo_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = udp_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_net
+};
+
static struct udp_seq_afinfo udplite6_seq_afinfo = {
.name = "udplite6",
.family = AF_INET6,
.udp_table = &udplite_table,
- .seq_fops = {
- .owner = THIS_MODULE,
- },
+ .seq_fops = &udplite6_afinfo_seq_fops,
.seq_ops = {
.show = udp6_seq_show,
},
diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c
index 34b2dde..bf8d50c 100644
--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -397,6 +397,7 @@
* expect to send up next, dequeue it and any other
* in-sequence packets behind it.
*/
+start:
spin_lock_bh(&session->reorder_q.lock);
skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
if (time_after(jiffies, L2TP_SKB_CB(skb)->expires)) {
@@ -433,7 +434,7 @@
*/
spin_unlock_bh(&session->reorder_q.lock);
l2tp_recv_dequeue_skb(session, skb);
- spin_lock_bh(&session->reorder_q.lock);
+ goto start;
}
out:
diff --git a/net/netfilter/core.c b/net/netfilter/core.c
index 3346829..afca6c7 100644
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -180,17 +180,16 @@
if (ret == 0)
ret = -EPERM;
} else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE) {
- ret = nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
- verdict >> NF_VERDICT_QBITS);
- if (ret < 0) {
- if (ret == -ECANCELED)
+ int err = nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
+ verdict >> NF_VERDICT_QBITS);
+ if (err < 0) {
+ if (err == -ECANCELED)
goto next_hook;
- if (ret == -ESRCH &&
+ if (err == -ESRCH &&
(verdict & NF_VERDICT_FLAG_QUEUE_BYPASS))
goto next_hook;
kfree_skb(skb);
}
- ret = 0;
}
rcu_read_unlock();
return ret;
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index d7e86ef..86137b5 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -1699,10 +1699,8 @@
ip_set_list = kzalloc(sizeof(struct ip_set *) * ip_set_max,
GFP_KERNEL);
- if (!ip_set_list) {
- pr_err("ip_set: Unable to create ip_set_list\n");
+ if (!ip_set_list)
return -ENOMEM;
- }
ret = nfnetlink_subsys_register(&ip_set_netlink_subsys);
if (ret != 0) {
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 4f77bb1..093cc32 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -188,14 +188,13 @@
}
-static inline int
+static inline void
ip_vs_set_state(struct ip_vs_conn *cp, int direction,
const struct sk_buff *skb,
struct ip_vs_proto_data *pd)
{
- if (unlikely(!pd->pp->state_transition))
- return 0;
- return pd->pp->state_transition(cp, direction, skb, pd);
+ if (likely(pd->pp->state_transition))
+ pd->pp->state_transition(cp, direction, skb, pd);
}
static inline int
@@ -530,7 +529,7 @@
a cache_bypass connection entry */
ipvs = net_ipvs(net);
if (ipvs->sysctl_cache_bypass && svc->fwmark && unicast) {
- int ret, cs;
+ int ret;
struct ip_vs_conn *cp;
unsigned int flags = (svc->flags & IP_VS_SVC_F_ONEPACKET &&
iph.protocol == IPPROTO_UDP)?
@@ -557,7 +556,7 @@
ip_vs_in_stats(cp, skb);
/* set state */
- cs = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
+ ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
/* transmit the first SYN packet */
ret = cp->packet_xmit(skb, cp, pd->pp);
@@ -1490,7 +1489,7 @@
struct ip_vs_protocol *pp;
struct ip_vs_proto_data *pd;
struct ip_vs_conn *cp;
- int ret, restart, pkts;
+ int ret, pkts;
struct netns_ipvs *ipvs;
/* Already marked as IPVS request or reply? */
@@ -1591,7 +1590,7 @@
}
ip_vs_in_stats(cp, skb);
- restart = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
+ ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
if (cp->packet_xmit)
ret = cp->packet_xmit(skb, cp, pp);
/* do not touch skb anymore */
@@ -1878,10 +1877,9 @@
struct netns_ipvs *ipvs;
ipvs = net_generic(net, ip_vs_net_id);
- if (ipvs == NULL) {
- pr_err("%s(): no memory.\n", __func__);
+ if (ipvs == NULL)
return -ENOMEM;
- }
+
/* Hold the beast until a service is registerd */
ipvs->enable = 0;
ipvs->net = net;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index e3be48b..008bf97 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -856,15 +856,12 @@
}
dest = kzalloc(sizeof(struct ip_vs_dest), GFP_KERNEL);
- if (dest == NULL) {
- pr_err("%s(): no memory.\n", __func__);
+ if (dest == NULL)
return -ENOMEM;
- }
+
dest->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
- if (!dest->stats.cpustats) {
- pr_err("%s() alloc_percpu failed\n", __func__);
+ if (!dest->stats.cpustats)
goto err_alloc;
- }
dest->af = svc->af;
dest->protocol = svc->protocol;
@@ -1168,10 +1165,8 @@
goto out_err;
}
svc->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
- if (!svc->stats.cpustats) {
- pr_err("%s() alloc_percpu failed\n", __func__);
+ if (!svc->stats.cpustats)
goto out_err;
- }
/* I'm the first user of the service */
atomic_set(&svc->usecnt, 0);
@@ -3326,10 +3321,8 @@
int ret = 0, cmd;
int need_full_svc = 0, need_full_dest = 0;
struct net *net;
- struct netns_ipvs *ipvs;
net = skb_sknet(skb);
- ipvs = net_ipvs(net);
cmd = info->genlhdr->cmd;
mutex_lock(&__ip_vs_mutex);
@@ -3421,10 +3414,8 @@
void *reply;
int ret, cmd, reply_cmd;
struct net *net;
- struct netns_ipvs *ipvs;
net = skb_sknet(skb);
- ipvs = net_ipvs(net);
cmd = info->genlhdr->cmd;
if (cmd == IPVS_CMD_GET_SERVICE)
@@ -3720,10 +3711,9 @@
/* procfs stats */
ipvs->tot_stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
- if (!ipvs->tot_stats.cpustats) {
- pr_err("%s(): alloc_percpu.\n", __func__);
+ if (!ipvs->tot_stats.cpustats)
return -ENOMEM;
- }
+
spin_lock_init(&ipvs->tot_stats.lock);
proc_net_fops_create(net, "ip_vs", 0, &ip_vs_info_fops);
diff --git a/net/netfilter/ipvs/ip_vs_dh.c b/net/netfilter/ipvs/ip_vs_dh.c
index 95fd0d1..1c269e5 100644
--- a/net/netfilter/ipvs/ip_vs_dh.c
+++ b/net/netfilter/ipvs/ip_vs_dh.c
@@ -150,10 +150,9 @@
/* allocate the DH table for this service */
tbl = kmalloc(sizeof(struct ip_vs_dh_bucket)*IP_VS_DH_TAB_SIZE,
GFP_ATOMIC);
- if (tbl == NULL) {
- pr_err("%s(): no memory\n", __func__);
+ if (tbl == NULL)
return -ENOMEM;
- }
+
svc->sched_data = tbl;
IP_VS_DBG(6, "DH hash table (memory=%Zdbytes) allocated for "
"current service\n",
diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c
index 4490a32..538d74e 100644
--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -52,8 +52,9 @@
* List of ports (up to IP_VS_APP_MAX_PORTS) to be handled by helper
* First port is set to the default port.
*/
+static unsigned int ports_count = 1;
static unsigned short ports[IP_VS_APP_MAX_PORTS] = {21, 0};
-module_param_array(ports, ushort, NULL, 0);
+module_param_array(ports, ushort, &ports_count, 0444);
MODULE_PARM_DESC(ports, "Ports to monitor for FTP control commands");
@@ -449,7 +450,7 @@
if (ret)
goto err_exit;
- for (i=0; i<IP_VS_APP_MAX_PORTS; i++) {
+ for (i = 0; i < ports_count; i++) {
if (!ports[i])
continue;
ret = register_ip_vs_app_inc(net, app, app->protocol, ports[i]);
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index 87e40ea..0f16283 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -202,10 +202,8 @@
en = ip_vs_lblc_get(dest->af, tbl, daddr);
if (!en) {
en = kmalloc(sizeof(*en), GFP_ATOMIC);
- if (!en) {
- pr_err("%s(): no memory\n", __func__);
+ if (!en)
return NULL;
- }
en->af = dest->af;
ip_vs_addr_copy(dest->af, &en->addr, daddr);
@@ -345,10 +343,9 @@
* Allocate the ip_vs_lblc_table for this service
*/
tbl = kmalloc(sizeof(*tbl), GFP_ATOMIC);
- if (tbl == NULL) {
- pr_err("%s(): no memory\n", __func__);
+ if (tbl == NULL)
return -ENOMEM;
- }
+
svc->sched_data = tbl;
IP_VS_DBG(6, "LBLC hash table (memory=%Zdbytes) allocated for "
"current service\n", sizeof(*tbl));
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index 90f618a..eec797f 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -112,10 +112,8 @@
}
e = kmalloc(sizeof(*e), GFP_ATOMIC);
- if (e == NULL) {
- pr_err("%s(): no memory\n", __func__);
+ if (e == NULL)
return NULL;
- }
atomic_inc(&dest->refcnt);
e->dest = dest;
@@ -373,10 +371,8 @@
en = ip_vs_lblcr_get(dest->af, tbl, daddr);
if (!en) {
en = kmalloc(sizeof(*en), GFP_ATOMIC);
- if (!en) {
- pr_err("%s(): no memory\n", __func__);
+ if (!en)
return NULL;
- }
en->af = dest->af;
ip_vs_addr_copy(dest->af, &en->addr, daddr);
@@ -516,10 +512,9 @@
* Allocate the ip_vs_lblcr_table for this service
*/
tbl = kmalloc(sizeof(*tbl), GFP_ATOMIC);
- if (tbl == NULL) {
- pr_err("%s(): no memory\n", __func__);
+ if (tbl == NULL)
return -ENOMEM;
- }
+
svc->sched_data = tbl;
IP_VS_DBG(6, "LBLCR hash table (memory=%Zdbytes) allocated for "
"current service\n", sizeof(*tbl));
diff --git a/net/netfilter/ipvs/ip_vs_nfct.c b/net/netfilter/ipvs/ip_vs_nfct.c
index f454c80..022e77e 100644
--- a/net/netfilter/ipvs/ip_vs_nfct.c
+++ b/net/netfilter/ipvs/ip_vs_nfct.c
@@ -127,7 +127,7 @@
nf_conntrack_alter_reply(ct, &new_tuple);
}
-int ip_vs_confirm_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp)
+int ip_vs_confirm_conntrack(struct sk_buff *skb)
{
return nf_conntrack_confirm(skb);
}
diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c
index 52d073c..8531293 100644
--- a/net/netfilter/ipvs/ip_vs_proto.c
+++ b/net/netfilter/ipvs/ip_vs_proto.c
@@ -74,10 +74,9 @@
struct ip_vs_proto_data *pd =
kzalloc(sizeof(struct ip_vs_proto_data), GFP_ATOMIC);
- if (!pd) {
- pr_err("%s(): no memory.\n", __func__);
+ if (!pd)
return -ENOMEM;
- }
+
pd->pp = pp; /* For speed issues */
pd->next = ipvs->proto_data_table[hash];
ipvs->proto_data_table[hash] = pd;
diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c
index d12ed53..1fbf7a2 100644
--- a/net/netfilter/ipvs/ip_vs_proto_sctp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c
@@ -906,7 +906,7 @@
return "?";
}
-static inline int
+static inline void
set_sctp_state(struct ip_vs_proto_data *pd, struct ip_vs_conn *cp,
int direction, const struct sk_buff *skb)
{
@@ -924,7 +924,7 @@
sch = skb_header_pointer(skb, ihl + sizeof(sctp_sctphdr_t),
sizeof(_sctpch), &_sctpch);
if (sch == NULL)
- return 0;
+ return;
chunk_type = sch->type;
/*
@@ -993,21 +993,15 @@
cp->timeout = pd->timeout_table[cp->state = next_state];
else /* What to do ? */
cp->timeout = sctp_timeouts[cp->state = next_state];
-
- return 1;
}
-static int
+static void
sctp_state_transition(struct ip_vs_conn *cp, int direction,
const struct sk_buff *skb, struct ip_vs_proto_data *pd)
{
- int ret = 0;
-
spin_lock(&cp->lock);
- ret = set_sctp_state(pd, cp, direction, skb);
+ set_sctp_state(pd, cp, direction, skb);
spin_unlock(&cp->lock);
-
- return ret;
}
static inline __u16 sctp_app_hashkey(__be16 port)
diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c
index c0cc341..ef8641f 100644
--- a/net/netfilter/ipvs/ip_vs_proto_tcp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c
@@ -546,7 +546,7 @@
/*
* Handle state transitions
*/
-static int
+static void
tcp_state_transition(struct ip_vs_conn *cp, int direction,
const struct sk_buff *skb,
struct ip_vs_proto_data *pd)
@@ -561,13 +561,11 @@
th = skb_header_pointer(skb, ihl, sizeof(_tcph), &_tcph);
if (th == NULL)
- return 0;
+ return;
spin_lock(&cp->lock);
set_tcp_state(pd, cp, direction, th);
spin_unlock(&cp->lock);
-
- return 1;
}
static inline __u16 tcp_app_hashkey(__be16 port)
diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c
index f1282cb..f4b7262 100644
--- a/net/netfilter/ipvs/ip_vs_proto_udp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_udp.c
@@ -454,18 +454,17 @@
return udp_state_name_table[state] ? udp_state_name_table[state] : "?";
}
-static int
+static void
udp_state_transition(struct ip_vs_conn *cp, int direction,
const struct sk_buff *skb,
struct ip_vs_proto_data *pd)
{
if (unlikely(!pd)) {
pr_err("UDP no ns data\n");
- return 0;
+ return;
}
cp->timeout = pd->timeout_table[IP_VS_UDP_S_NORMAL];
- return 1;
}
static void __udp_init(struct net *net, struct ip_vs_proto_data *pd)
diff --git a/net/netfilter/ipvs/ip_vs_sh.c b/net/netfilter/ipvs/ip_vs_sh.c
index b5e2556..33815f4 100644
--- a/net/netfilter/ipvs/ip_vs_sh.c
+++ b/net/netfilter/ipvs/ip_vs_sh.c
@@ -147,10 +147,9 @@
/* allocate the SH table for this service */
tbl = kmalloc(sizeof(struct ip_vs_sh_bucket)*IP_VS_SH_TAB_SIZE,
GFP_ATOMIC);
- if (tbl == NULL) {
- pr_err("%s(): no memory\n", __func__);
+ if (tbl == NULL)
return -ENOMEM;
- }
+
svc->sched_data = tbl;
IP_VS_DBG(6, "SH hash table (memory=%Zdbytes) allocated for "
"current service\n",
diff --git a/net/netfilter/ipvs/ip_vs_wrr.c b/net/netfilter/ipvs/ip_vs_wrr.c
index 1ef41f5..fd0d4e0 100644
--- a/net/netfilter/ipvs/ip_vs_wrr.c
+++ b/net/netfilter/ipvs/ip_vs_wrr.c
@@ -85,10 +85,9 @@
* Allocate the mark variable for WRR scheduling
*/
mark = kmalloc(sizeof(struct ip_vs_wrr_mark), GFP_ATOMIC);
- if (mark == NULL) {
- pr_err("%s(): no memory\n", __func__);
+ if (mark == NULL)
return -ENOMEM;
- }
+
mark->cl = &svc->destinations;
mark->cw = 0;
mark->mw = ip_vs_wrr_max_weight(svc);
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index ee319a4..aa2d720 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -339,7 +339,7 @@
\
(skb)->ipvs_property = 1; \
if (unlikely((cp)->flags & IP_VS_CONN_F_NFCT)) \
- __ret = ip_vs_confirm_conntrack(skb, cp); \
+ __ret = ip_vs_confirm_conntrack(skb); \
if (__ret == NF_ACCEPT) { \
nf_reset(skb); \
skb_forward_csum(skb); \
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 5acfaf5..7202b06 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -661,7 +661,6 @@
*/
ct = kmem_cache_alloc(net->ct.nf_conntrack_cachep, gfp);
if (ct == NULL) {
- pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
atomic_dec(&net->ct.count);
return ERR_PTR(-ENOMEM);
}
@@ -749,10 +748,8 @@
ct = __nf_conntrack_alloc(net, zone, tuple, &repl_tuple, GFP_ATOMIC,
hash);
- if (IS_ERR(ct)) {
- pr_debug("Can't allocate conntrack.\n");
+ if (IS_ERR(ct))
return (struct nf_conntrack_tuple_hash *)ct;
- }
if (!l4proto->new(ct, skb, dataoff)) {
nf_conntrack_free(ct);
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index 2d8158a..66b2c54 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -307,17 +307,14 @@
n = max(inst_size, pkt_size);
skb = alloc_skb(n, GFP_ATOMIC);
if (!skb) {
- pr_notice("nfnetlink_log: can't alloc whole buffer (%u bytes)\n",
- inst_size);
-
if (n > pkt_size) {
/* try to allocate only as much as we need for current
* packet */
skb = alloc_skb(pkt_size, GFP_ATOMIC);
if (!skb)
- pr_err("nfnetlink_log: can't even alloc %u "
- "bytes\n", pkt_size);
+ pr_err("nfnetlink_log: can't even alloc %u bytes\n",
+ pkt_size);
}
}
diff --git a/net/netfilter/xt_IDLETIMER.c b/net/netfilter/xt_IDLETIMER.c
index 3bdd443..f407ebc1 100644
--- a/net/netfilter/xt_IDLETIMER.c
+++ b/net/netfilter/xt_IDLETIMER.c
@@ -122,14 +122,12 @@
info->timer = kmalloc(sizeof(*info->timer), GFP_KERNEL);
if (!info->timer) {
- pr_debug("couldn't alloc timer\n");
ret = -ENOMEM;
goto out;
}
info->timer->attr.attr.name = kstrdup(info->label, GFP_KERNEL);
if (!info->timer->attr.attr.name) {
- pr_debug("couldn't alloc attribute name\n");
ret = -ENOMEM;
goto out_free_timer;
}
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 9228ee0d..dfd52ba 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -176,10 +176,7 @@
ent = NULL;
} else
ent = kmem_cache_alloc(hashlimit_cachep, GFP_ATOMIC);
- if (!ent) {
- if (net_ratelimit())
- pr_err("cannot allocate dsthash_ent\n");
- } else {
+ if (ent) {
memcpy(&ent->dst, dst, sizeof(ent->dst));
spin_lock_init(&ent->lock);
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 03bb45a..82a6f34 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -335,7 +335,7 @@
(((x)->kactive_blk_num < ((x)->knum_blocks-1)) ? \
((x)->kactive_blk_num+1) : 0)
-static inline struct packet_sock *pkt_sk(struct sock *sk)
+static struct packet_sock *pkt_sk(struct sock *sk)
{
return (struct packet_sock *)sk;
}
@@ -477,7 +477,7 @@
return h.raw;
}
-static inline void *packet_current_frame(struct packet_sock *po,
+static void *packet_current_frame(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
@@ -715,7 +715,7 @@
spin_unlock(&po->sk.sk_receive_queue.lock);
}
-static inline void prb_flush_block(struct tpacket_kbdq_core *pkc1,
+static void prb_flush_block(struct tpacket_kbdq_core *pkc1,
struct tpacket_block_desc *pbd1, __u32 status)
{
/* Flush everything minus the block header */
@@ -793,7 +793,7 @@
pkc1->kactive_blk_num = GET_NEXT_PRB_BLK_NUM(pkc1);
}
-static inline void prb_thaw_queue(struct tpacket_kbdq_core *pkc)
+static void prb_thaw_queue(struct tpacket_kbdq_core *pkc)
{
pkc->reset_pending_on_curr_blk = 0;
}
@@ -869,7 +869,7 @@
* case and __packet_lookup_frame_in_block will check if block-0
* is free and can now be re-used.
*/
-static inline void prb_freeze_queue(struct tpacket_kbdq_core *pkc,
+static void prb_freeze_queue(struct tpacket_kbdq_core *pkc,
struct packet_sock *po)
{
pkc->reset_pending_on_curr_blk = 1;
@@ -940,36 +940,36 @@
BUG();
}
-static inline int prb_curr_blk_in_use(struct tpacket_kbdq_core *pkc,
+static int prb_curr_blk_in_use(struct tpacket_kbdq_core *pkc,
struct tpacket_block_desc *pbd)
{
return TP_STATUS_USER & BLOCK_STATUS(pbd);
}
-static inline int prb_queue_frozen(struct tpacket_kbdq_core *pkc)
+static int prb_queue_frozen(struct tpacket_kbdq_core *pkc)
{
return pkc->reset_pending_on_curr_blk;
}
-static inline void prb_clear_blk_fill_status(struct packet_ring_buffer *rb)
+static void prb_clear_blk_fill_status(struct packet_ring_buffer *rb)
{
struct tpacket_kbdq_core *pkc = GET_PBDQC_FROM_RB(rb);
atomic_dec(&pkc->blk_fill_in_prog);
}
-static inline void prb_fill_rxhash(struct tpacket_kbdq_core *pkc,
+static void prb_fill_rxhash(struct tpacket_kbdq_core *pkc,
struct tpacket3_hdr *ppd)
{
ppd->hv1.tp_rxhash = skb_get_rxhash(pkc->skb);
}
-static inline void prb_clear_rxhash(struct tpacket_kbdq_core *pkc,
+static void prb_clear_rxhash(struct tpacket_kbdq_core *pkc,
struct tpacket3_hdr *ppd)
{
ppd->hv1.tp_rxhash = 0;
}
-static inline void prb_fill_vlan_info(struct tpacket_kbdq_core *pkc,
+static void prb_fill_vlan_info(struct tpacket_kbdq_core *pkc,
struct tpacket3_hdr *ppd)
{
if (vlan_tx_tag_present(pkc->skb)) {
@@ -991,7 +991,7 @@
prb_clear_rxhash(pkc, ppd);
}
-static inline void prb_fill_curr_block(char *curr,
+static void prb_fill_curr_block(char *curr,
struct tpacket_kbdq_core *pkc,
struct tpacket_block_desc *pbd,
unsigned int len)
@@ -1071,7 +1071,7 @@
return NULL;
}
-static inline void *packet_current_rx_frame(struct packet_sock *po,
+static void *packet_current_rx_frame(struct packet_sock *po,
struct sk_buff *skb,
int status, unsigned int len)
{
@@ -1091,7 +1091,7 @@
}
}
-static inline void *prb_lookup_block(struct packet_sock *po,
+static void *prb_lookup_block(struct packet_sock *po,
struct packet_ring_buffer *rb,
unsigned int previous,
int status)
@@ -1104,7 +1104,7 @@
return pbd;
}
-static inline int prb_previous_blk_num(struct packet_ring_buffer *rb)
+static int prb_previous_blk_num(struct packet_ring_buffer *rb)
{
unsigned int prev;
if (rb->prb_bdqc.kactive_blk_num)
@@ -1115,7 +1115,7 @@
}
/* Assumes caller has held the rx_queue.lock */
-static inline void *__prb_previous_block(struct packet_sock *po,
+static void *__prb_previous_block(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
@@ -1123,7 +1123,7 @@
return prb_lookup_block(po, rb, previous, status);
}
-static inline void *packet_previous_rx_frame(struct packet_sock *po,
+static void *packet_previous_rx_frame(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
@@ -1133,7 +1133,7 @@
return __prb_previous_block(po, rb, status);
}
-static inline void packet_increment_rx_head(struct packet_sock *po,
+static void packet_increment_rx_head(struct packet_sock *po,
struct packet_ring_buffer *rb)
{
switch (po->tp_version) {
@@ -1148,7 +1148,7 @@
}
}
-static inline void *packet_previous_frame(struct packet_sock *po,
+static void *packet_previous_frame(struct packet_sock *po,
struct packet_ring_buffer *rb,
int status)
{
@@ -1156,7 +1156,7 @@
return packet_lookup_frame(po, rb, previous, status);
}
-static inline void packet_increment_head(struct packet_ring_buffer *buff)
+static void packet_increment_head(struct packet_ring_buffer *buff)
{
buff->head = buff->head != buff->frame_max ? buff->head+1 : 0;
}
@@ -1558,7 +1558,7 @@
return err;
}
-static inline unsigned int run_filter(const struct sk_buff *skb,
+static unsigned int run_filter(const struct sk_buff *skb,
const struct sock *sk,
unsigned int res)
{
@@ -2167,10 +2167,10 @@
return err;
}
-static inline struct sk_buff *packet_alloc_skb(struct sock *sk, size_t prepad,
- size_t reserve, size_t len,
- size_t linear, int noblock,
- int *err)
+static struct sk_buff *packet_alloc_skb(struct sock *sk, size_t prepad,
+ size_t reserve, size_t len,
+ size_t linear, int noblock,
+ int *err)
{
struct sk_buff *skb;
@@ -3494,7 +3494,7 @@
kfree(pg_vec);
}
-static inline char *alloc_one_pg_vec_page(unsigned long order)
+static char *alloc_one_pg_vec_page(unsigned long order)
{
char *buffer = NULL;
gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP |
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 5f03e4e..3e16c6a 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -1261,14 +1261,19 @@
struct x25_sock *x25 = x25_sk(sk);
struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)msg->msg_name;
size_t copied;
- int qbit, header_len = x25->neighbour->extended ?
- X25_EXT_MIN_LEN : X25_STD_MIN_LEN;
-
+ int qbit, header_len;
struct sk_buff *skb;
unsigned char *asmptr;
int rc = -ENOTCONN;
lock_sock(sk);
+
+ if (x25->neighbour == NULL)
+ goto out;
+
+ header_len = x25->neighbour->extended ?
+ X25_EXT_MIN_LEN : X25_STD_MIN_LEN;
+
/*
* This works for seqpacket too. The receiver has ordered the queue for
* us! We do one quick check first though
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index 19c053b..4f554f2 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -9,7 +9,7 @@
select CRYPTO_HMAC
select CRYPTO_MD5
select CRYPTO_SHA1
- select TCG_TPM if !S390
+ select TCG_TPM if !S390 && !UML
select TCG_TIS if TCG_TPM
help
The Trusted Computing Group(TCG) runtime Integrity
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index 150911c..c47d3ce 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -966,6 +966,9 @@
return found;
}
+static struct tomoyo_domain_info *tomoyo_find_domain_by_qid
+(unsigned int serial);
+
/**
* tomoyo_select_domain - Parse select command.
*
@@ -999,6 +1002,8 @@
} else if (!strncmp(data, "domain=", 7)) {
if (tomoyo_domain_def(data + 7))
domain = tomoyo_find_domain(data + 7);
+ } else if (sscanf(data, "Q=%u", &pid) == 1) {
+ domain = tomoyo_find_domain_by_qid(pid);
} else
return false;
head->w.domain = domain;
@@ -1894,6 +1899,7 @@
/* Structure for query. */
struct tomoyo_query {
struct list_head list;
+ struct tomoyo_domain_info *domain;
char *query;
size_t query_len;
unsigned int serial;
@@ -2044,6 +2050,7 @@
goto out;
}
len = tomoyo_round2(entry.query_len);
+ entry.domain = r->domain;
spin_lock(&tomoyo_query_list_lock);
if (tomoyo_memory_quota[TOMOYO_MEMORY_QUERY] &&
tomoyo_memory_used[TOMOYO_MEMORY_QUERY] + len
@@ -2091,6 +2098,29 @@
}
/**
+ * tomoyo_find_domain_by_qid - Get domain by query id.
+ *
+ * @serial: Query ID assigned by tomoyo_supervisor().
+ *
+ * Returns pointer to "struct tomoyo_domain_info" if found, NULL otherwise.
+ */
+static struct tomoyo_domain_info *tomoyo_find_domain_by_qid
+(unsigned int serial)
+{
+ struct tomoyo_query *ptr;
+ struct tomoyo_domain_info *domain = NULL;
+ spin_lock(&tomoyo_query_list_lock);
+ list_for_each_entry(ptr, &tomoyo_query_list, list) {
+ if (ptr->serial != serial || ptr->answer)
+ continue;
+ domain = ptr->domain;
+ break;
+ }
+ spin_unlock(&tomoyo_query_list_lock);
+ return domain;
+}
+
+/**
* tomoyo_poll_query - poll() for /sys/kernel/security/tomoyo/query.
*
* @file: Pointer to "struct file".
diff --git a/sound/Kconfig b/sound/Kconfig
index 1fef141..261a03c 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -59,7 +59,7 @@
source "sound/oss/dmasound/Kconfig"
-if !M68K
+if !M68K && !UML
menuconfig SND
tristate "Advanced Linux Sound Architecture"
diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c
index a70ee7f..031e215 100644
--- a/sound/core/hwdep.c
+++ b/sound/core/hwdep.c
@@ -272,7 +272,14 @@
if (get_user(device, (int __user *)arg))
return -EFAULT;
mutex_lock(®ister_mutex);
- device = device < 0 ? 0 : device + 1;
+
+ if (device < 0)
+ device = 0;
+ else if (device < SNDRV_MINOR_HWDEPS)
+ device++;
+ else
+ device = SNDRV_MINOR_HWDEPS;
+
while (device < SNDRV_MINOR_HWDEPS) {
if (snd_hwdep_search(card, device))
break;
diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig
index 77dd0a1..d2f615a 100644
--- a/sound/mips/Kconfig
+++ b/sound/mips/Kconfig
@@ -24,7 +24,7 @@
config SND_AU1X00
tristate "Au1x00 AC97 Port Driver (DEPRECATED)"
- depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500
+ depends on MIPS_ALCHEMY
select SND_PCM
select SND_AC97_CODEC
help
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index 72e5885..7e7d078 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -756,8 +756,6 @@
}
if (!fw->size)
return 0;
- if (size < fw->size)
- size = fw->size;
for (len = 0; len < fw->size; len++) {
if (!*p)
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 81e12c0..79f49e2 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -442,6 +442,8 @@
(cfg & AC_DEFCFG_SEQUENCE)
#define get_defcfg_device(cfg) \
((cfg & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT)
+#define get_defcfg_misc(cfg) \
+ ((cfg & AC_DEFCFG_MISC) >> AC_DEFCFG_MISC_SHIFT)
/* bit-flags for snd_hda_parse_pin_def_config() behavior */
#define HDA_PINCFG_NO_HP_FIXUP (1 << 0) /* no HP-split */
@@ -509,6 +511,8 @@
static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
{
return (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT) &&
+ !(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid) &
+ AC_DEFCFG_MISC_NO_PRESENCE)) &&
(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP);
}
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 3425401..aac3bfa 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1006,7 +1006,6 @@
unsigned int caps, config;
int pin_idx;
struct hdmi_spec_per_pin *per_pin;
- struct hdmi_eld *eld;
int err;
caps = snd_hda_param_read(codec, pin_nid, AC_PAR_PIN_CAP);
@@ -1023,7 +1022,6 @@
pin_idx = spec->num_pins;
per_pin = &spec->pins[pin_idx];
- eld = &per_pin->sink_eld;
per_pin->pin_nid = pin_nid;
@@ -1576,7 +1574,7 @@
struct snd_pcm_substream *substream)
{
int chs;
- unsigned int dataDCC1, dataDCC2, channel_id;
+ unsigned int dataDCC2, channel_id;
int i;
struct hdmi_spec *spec = codec->spec;
struct hda_spdif_out *spdif =
@@ -1586,7 +1584,6 @@
chs = substream->runtime->channels;
- dataDCC1 = AC_DIG1_ENABLE | AC_DIG1_COPYRIGHT;
dataDCC2 = 0x2;
/* turn off SPDIF once; otherwise the IEC958 bits won't be updated */
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8f93b97..80d6add 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1604,27 +1604,29 @@
static void alc_auto_parse_digital(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- int i, err;
+ int i, err, nums;
hda_nid_t dig_nid;
/* support multiple SPDIFs; the secondary is set up as a slave */
+ nums = 0;
for (i = 0; i < spec->autocfg.dig_outs; i++) {
hda_nid_t conn[4];
err = snd_hda_get_connections(codec,
spec->autocfg.dig_out_pins[i],
conn, ARRAY_SIZE(conn));
- if (err < 0)
+ if (err <= 0)
continue;
dig_nid = conn[0]; /* assume the first element is audio-out */
- if (!i) {
+ if (!nums) {
spec->multiout.dig_out_nid = dig_nid;
spec->dig_out_type = spec->autocfg.dig_out_type[0];
} else {
spec->multiout.slave_dig_outs = spec->slave_dig_outs;
- if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
+ if (nums >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
break;
- spec->slave_dig_outs[i - 1] = dig_nid;
+ spec->slave_dig_outs[nums - 1] = dig_nid;
}
+ nums++;
}
if (spec->autocfg.dig_in_pin) {
@@ -2270,6 +2272,7 @@
struct alc_spec *spec = codec->spec;
struct hda_pcm *info = spec->pcm_rec;
const struct hda_pcm_stream *p;
+ bool have_multi_adcs;
int i;
codec->num_pcms = 1;
@@ -2348,8 +2351,11 @@
/* If the use of more than one ADC is requested for the current
* model, configure a second analog capture-only PCM.
*/
+ have_multi_adcs = (spec->num_adc_nids > 1) &&
+ !spec->dyn_adc_switch && !spec->auto_mic &&
+ (!spec->input_mux || spec->input_mux->num_items > 1);
/* Additional Analaog capture for index #2 */
- if (spec->alt_dac_nid || spec->num_adc_nids > 1) {
+ if (spec->alt_dac_nid || have_multi_adcs) {
codec->num_pcms = 3;
info = spec->pcm_rec + 2;
info->name = spec->stream_name_analog;
@@ -2365,7 +2371,7 @@
alc_pcm_null_stream;
info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = 0;
}
- if (spec->num_adc_nids > 1) {
+ if (have_multi_adcs) {
p = spec->stream_analog_alt_capture;
if (!p)
p = &alc_pcm_analog_alt_capture;
@@ -2657,7 +2663,6 @@
hda_nid_t *adc_nids = spec->private_adc_nids;
hda_nid_t *cap_nids = spec->private_capsrc_nids;
int max_nums = ARRAY_SIZE(spec->private_adc_nids);
- bool indep_capsrc = false;
int i, nums = 0;
nid = codec->start_nid;
@@ -2679,13 +2684,11 @@
break;
if (type == AC_WID_AUD_SEL) {
cap_nids[nums] = src;
- indep_capsrc = true;
break;
}
n = snd_hda_get_conn_list(codec, src, &list);
if (n > 1) {
cap_nids[nums] = src;
- indep_capsrc = true;
break;
} else if (n != 1)
break;
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 59a52a4..de4c360 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3791,9 +3791,10 @@
}
-static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out, hda_nid_t dig_in)
+static int stac92xx_parse_auto_config(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
+ hda_nid_t dig_out = 0, dig_in = 0;
int hp_swap = 0;
int i, err;
@@ -3976,6 +3977,22 @@
if (spec->multiout.max_channels > 2)
spec->surr_switch = 1;
+ /* find digital out and in converters */
+ for (i = codec->start_nid; i < codec->start_nid + codec->num_nodes; i++) {
+ unsigned int wid_caps = get_wcaps(codec, i);
+ if (wid_caps & AC_WCAP_DIGITAL) {
+ switch (get_wcaps_type(wid_caps)) {
+ case AC_WID_AUD_OUT:
+ if (!dig_out)
+ dig_out = i;
+ break;
+ case AC_WID_AUD_IN:
+ if (!dig_in)
+ dig_in = i;
+ break;
+ }
+ }
+ }
if (spec->autocfg.dig_outs)
spec->multiout.dig_out_nid = dig_out;
if (dig_in && spec->autocfg.dig_in_pin)
@@ -5279,7 +5296,7 @@
spec->capvols = stac925x_capvols;
spec->capsws = stac925x_capsws;
- err = stac92xx_parse_auto_config(codec, 0x8, 0x7);
+ err = stac92xx_parse_auto_config(codec);
if (!err) {
if (spec->board_config < 0) {
printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -5420,7 +5437,7 @@
spec->num_pwrs = ARRAY_SIZE(stac92hd73xx_pwr_nids);
spec->pwr_nids = stac92hd73xx_pwr_nids;
- err = stac92xx_parse_auto_config(codec, 0x25, 0x27);
+ err = stac92xx_parse_auto_config(codec);
if (!err) {
if (spec->board_config < 0) {
@@ -5629,26 +5646,8 @@
stac92xx_set_config_regs(codec,
stac92hd83xxx_brd_tbl[spec->board_config]);
- switch (codec->vendor_id) {
- case 0x111d76d1:
- case 0x111d76d9:
- case 0x111d76df:
- case 0x111d76e5:
- case 0x111d7666:
- case 0x111d7667:
- case 0x111d7668:
- case 0x111d7669:
- case 0x111d76e3:
- case 0x111d7604:
- case 0x111d76d4:
- case 0x111d7605:
- case 0x111d76d5:
- case 0x111d76e7:
- if (spec->board_config == STAC_92HD83XXX_PWR_REF)
- break;
+ if (spec->board_config != STAC_92HD83XXX_PWR_REF)
spec->num_pwrs = 0;
- break;
- }
codec->patch_ops = stac92xx_patch_ops;
@@ -5675,7 +5674,7 @@
}
#endif
- err = stac92xx_parse_auto_config(codec, 0x1d, 0);
+ err = stac92xx_parse_auto_config(codec);
if (!err) {
if (spec->board_config < 0) {
printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -5996,7 +5995,7 @@
spec->multiout.dac_nids = spec->dac_nids;
- err = stac92xx_parse_auto_config(codec, 0x21, 0);
+ err = stac92xx_parse_auto_config(codec);
if (!err) {
if (spec->board_config < 0) {
printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6105,7 +6104,7 @@
spec->multiout.dac_nids = spec->dac_nids;
- err = stac92xx_parse_auto_config(codec, 0x08, 0x09);
+ err = stac92xx_parse_auto_config(codec);
if (!err) {
if (spec->board_config < 0) {
printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6230,7 +6229,7 @@
spec->aloopback_shift = 0;
spec->eapd_switch = 1;
- err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
+ err = stac92xx_parse_auto_config(codec);
if (!err) {
if (spec->board_config < 0) {
printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6355,7 +6354,7 @@
break;
}
- err = stac92xx_parse_auto_config(codec, 0x1f, 0x20);
+ err = stac92xx_parse_auto_config(codec);
if (!err) {
if (spec->board_config < 0) {
printk(KERN_WARNING "hda_codec: No auto-config is "
@@ -6460,7 +6459,7 @@
spec->capvols = stac9872_capvols;
spec->capsws = stac9872_capsws;
- err = stac92xx_parse_auto_config(codec, 0x10, 0x12);
+ err = stac92xx_parse_auto_config(codec);
if (err < 0) {
stac92xx_free(codec);
return -EINVAL;
@@ -6565,6 +6564,18 @@
{ .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx},
{ .id = 0x111d76e7, .name = "92HD90BXX", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76e8, .name = "92HD66B1X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76e9, .name = "92HD66B2X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76ea, .name = "92HD66B3X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76eb, .name = "92HD66C1X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76ec, .name = "92HD66C2X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76ed, .name = "92HD66C3X5", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76ee, .name = "92HD66B1X3", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76ef, .name = "92HD66B2X3", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76f0, .name = "92HD66B3X3", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76f1, .name = "92HD66C1X3", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76f2, .name = "92HD66C2X3", .patch = patch_stac92hd83xxx},
+ { .id = 0x111d76f3, .name = "92HD66C3/65", .patch = patch_stac92hd83xxx},
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 417d62a..0b020a9 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -3700,13 +3700,8 @@
static void set_widgets_power_state_vt1812(struct hda_codec *codec)
{
struct via_spec *spec = codec->spec;
- int imux_is_smixer =
- snd_hda_codec_read(codec, 0x13, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 3;
unsigned int parm;
unsigned int present;
- /* MUX10 (1eh) = stereo mixer */
- imux_is_smixer =
- snd_hda_codec_read(codec, 0x1e, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 5;
/* inputs */
/* PW 5/6/7 (29h/2ah/2bh) */
parm = AC_PWRST_D3;
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 6a5b387..45b2055 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -42,6 +42,12 @@
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
+#ifdef CONFIG_KVM_GUEST
+#include <linux/kvm_para.h>
+#else
+#define kvm_para_available() (0)
+#endif
+
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
MODULE_DESCRIPTION("Intel 82801AA,82901AB,i810,i820,i830,i840,i845,MX440; SiS 7012; Ali 5455");
MODULE_LICENSE("GPL");
@@ -77,6 +83,7 @@
static int buggy_irq = -1; /* auto-check */
static int xbox;
static int spdif_aclink = -1;
+static int inside_vm = -1;
module_param(index, int, 0444);
MODULE_PARM_DESC(index, "Index value for Intel i8x0 soundcard.");
@@ -94,6 +101,8 @@
MODULE_PARM_DESC(xbox, "Set to 1 for Xbox, if you have problems with the AC'97 codec detection.");
module_param(spdif_aclink, int, 0444);
MODULE_PARM_DESC(spdif_aclink, "S/PDIF over AC-link.");
+module_param(inside_vm, bool, 0444);
+MODULE_PARM_DESC(inside_vm, "KVM/Parallels optimization.");
/* just for backward compatibility */
static int enable;
@@ -400,6 +409,7 @@
unsigned buggy_irq: 1; /* workaround for buggy mobos */
unsigned xbox: 1; /* workaround for Xbox AC'97 detection */
unsigned buggy_semaphore: 1; /* workaround for buggy codec semaphore */
+ unsigned inside_vm: 1; /* enable VM optimization */
int spdif_idx; /* SPDIF BAR index; *_SPBAR or -1 if use PCMOUT */
unsigned int sdm_saved; /* SDM reg value */
@@ -1065,8 +1075,11 @@
udelay(10);
continue;
}
- if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
- ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+ if (civ != igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV))
+ continue;
+ if (chip->inside_vm)
+ break;
+ if (ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
break;
} while (timeout--);
ptr = ichdev->last_pos;
@@ -2984,6 +2997,10 @@
if (xbox)
chip->xbox = 1;
+ chip->inside_vm = inside_vm;
+ if (inside_vm)
+ printk(KERN_INFO "intel8x0: enable KVM optimization\n");
+
if (pci->vendor == PCI_VENDOR_ID_INTEL &&
pci->device == PCI_DEVICE_ID_INTEL_440MX)
chip->fix_nocache = 1; /* enable workaround */
@@ -3226,6 +3243,14 @@
buggy_irq = 0;
}
+ if (inside_vm < 0) {
+ /* detect KVM and Parallels virtual environments */
+ inside_vm = kvm_para_available();
+#if defined(__i386__) || defined(__x86_64__)
+ inside_vm = inside_vm || boot_cpu_has(X86_FEATURE_HYPERVISOR);
+#endif
+ }
+
if ((err = snd_intel8x0_create(card, pci, pci_id->driver_data,
&chip)) < 0) {
snd_card_free(card);
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index 1c6d1e1..f742202 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -151,7 +151,7 @@
#define HDSP_PROGRAM 0x020
#define HDSP_CONFIG_MODE_0 0x040
#define HDSP_CONFIG_MODE_1 0x080
-#define HDSP_VERSION_BIT 0x100
+#define HDSP_VERSION_BIT (0x100 | HDSP_S_LOAD)
#define HDSP_BIGENDIAN_MODE 0x200
#define HDSP_RD_MULTIPLE 0x400
#define HDSP_9652_ENABLE_MIXER 0x800
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 6e2f7ef..15a6c3b 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -520,16 +520,9 @@
#define HDSPM_DMA_AREA_BYTES (HDSPM_MAX_CHANNELS * HDSPM_CHANNEL_BUFFER_BYTES)
#define HDSPM_DMA_AREA_KILOBYTES (HDSPM_DMA_AREA_BYTES/1024)
-/* revisions >= 230 indicate AES32 card */
-#define HDSPM_MADI_ANCIENT_REV 204
-#define HDSPM_MADI_OLD_REV 207
-#define HDSPM_MADI_REV 210
#define HDSPM_RAYDAT_REV 211
#define HDSPM_AIO_REV 212
#define HDSPM_MADIFACE_REV 213
-#define HDSPM_AES_REV 240
-#define HDSPM_AES32_REV 234
-#define HDSPM_AES32_OLD_REV 233
/* speed factor modes */
#define HDSPM_SPEED_SINGLE 0
@@ -6253,7 +6246,7 @@
status.card_specific.madi.madi_input =
(statusregister & HDSPM_AB_int) ? 1 : 0;
status.card_specific.madi.channel_format =
- (statusregister & HDSPM_TX_64ch) ? 1 : 0;
+ (statusregister & HDSPM_RX_64ch) ? 1 : 0;
/* TODO: Mac driver sets it when f_s>48kHz */
status.card_specific.madi.frame_format = 0;
@@ -6503,13 +6496,6 @@
strcpy(card->driver, "HDSPM");
switch (hdspm->firmware_rev) {
- case HDSPM_MADI_REV:
- case HDSPM_MADI_OLD_REV:
- case HDSPM_MADI_ANCIENT_REV:
- hdspm->io_type = MADI;
- hdspm->card_name = "RME MADI";
- hdspm->midiPorts = 3;
- break;
case HDSPM_RAYDAT_REV:
hdspm->io_type = RayDAT;
hdspm->card_name = "RME RayDAT";
@@ -6525,17 +6511,25 @@
hdspm->card_name = "RME MADIface";
hdspm->midiPorts = 1;
break;
- case HDSPM_AES_REV:
- case HDSPM_AES32_REV:
- case HDSPM_AES32_OLD_REV:
- hdspm->io_type = AES32;
- hdspm->card_name = "RME AES32";
- hdspm->midiPorts = 2;
- break;
default:
- snd_printk(KERN_ERR "HDSPM: unknown firmware revision %x\n",
+ if ((hdspm->firmware_rev == 0xf0) ||
+ ((hdspm->firmware_rev >= 0xe6) &&
+ (hdspm->firmware_rev <= 0xea))) {
+ hdspm->io_type = AES32;
+ hdspm->card_name = "RME AES32";
+ hdspm->midiPorts = 2;
+ } else if ((hdspm->firmware_rev == 0xd5) ||
+ ((hdspm->firmware_rev >= 0xc8) &&
+ (hdspm->firmware_rev <= 0xcf))) {
+ hdspm->io_type = MADI;
+ hdspm->card_name = "RME MADI";
+ hdspm->midiPorts = 3;
+ } else {
+ snd_printk(KERN_ERR
+ "HDSPM: unknown firmware revision %x\n",
hdspm->firmware_rev);
- return -ENODEV;
+ return -ENODEV;
+ }
}
err = pci_enable_device(pci);
diff --git a/sound/soc/au1x/Kconfig b/sound/soc/au1x/Kconfig
index 6d59254..e908a81 100644
--- a/sound/soc/au1x/Kconfig
+++ b/sound/soc/au1x/Kconfig
@@ -3,7 +3,7 @@
##
config SND_SOC_AU1XPSC
tristate "SoC Audio for Au1200/Au1250/Au1550"
- depends on SOC_AU1200 || SOC_AU1550
+ depends on MIPS_ALCHEMY
help
This option enables support for the Programmable Serial
Controllers in AC97 and I2S mode, and the Descriptor-Based DMA
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index ab27dbc..336de8f 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -430,6 +430,7 @@
iface_reg |= TLV320AIC23_MS_MASTER;
break;
case SND_SOC_DAIFMT_CBS_CFS:
+ iface_reg &= ~TLV320AIC23_MS_MASTER;
break;
default:
return -EINVAL;
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 7a49390..87d5ef1 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1023,6 +1023,7 @@
break;
case SND_SOC_DAIFMT_CBS_CFS:
aic3x->master = 0;
+ iface_areg &= ~(BIT_CLK_MASTER | WORD_CLK_MASTER);
break;
default:
return -EINVAL;
diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
index 5d88c99..42d9039 100644
--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -2361,13 +2361,17 @@
{
struct wm5100_priv *wm5100 = gpio_to_wm5100(chip);
struct snd_soc_codec *codec = wm5100->codec;
- int val;
+ int val, ret;
val = (1 << WM5100_GP1_FN_SHIFT) | (!!value << WM5100_GP1_LVL_SHIFT);
- return snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
- WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
- WM5100_GP1_LVL, val);
+ ret = snd_soc_update_bits(codec, WM5100_GPIO_CTRL_1 + offset,
+ WM5100_GP1_FN_MASK | WM5100_GP1_DIR |
+ WM5100_GP1_LVL, val);
+ if (ret < 0)
+ return ret;
+ else
+ return 0;
}
static int wm5100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
index 8d0347c..076bdb9 100644
--- a/sound/soc/codecs/wm8711.c
+++ b/sound/soc/codecs/wm8711.c
@@ -151,7 +151,7 @@
{
struct snd_soc_codec *codec = dai->codec;
struct wm8711_priv *wm8711 = snd_soc_codec_get_drvdata(codec);
- u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfffc;
+ u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfff3;
int i = get_coeff(wm8711->sysclk, params_rate(params));
u16 srate = (coeff_div[i].sr << 2) |
(coeff_div[i].bosr << 1) | coeff_div[i].usb;
@@ -232,7 +232,7 @@
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 iface = 0;
+ u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0x000c;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 9fc8f4c..285ef87 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -867,7 +867,7 @@
SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
- WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 0),
+ WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 1),
SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
SOC_ENUM("High Pass Filter Mode", hpf_mode),
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index dc5cb31..de9ec9b 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -621,7 +621,7 @@
switch (div_id) {
case WM8940_BCLKDIV:
- reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFEF3;
+ reg = snd_soc_read(codec, WM8940_CLOCK) & 0xFFE3;
ret = snd_soc_write(codec, WM8940_CLOCK, reg | (div << 2));
break;
case WM8940_MCLKDIV:
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index f60dfa1..91d3c6d 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -1961,7 +1961,13 @@
static int wm8962_reset(struct snd_soc_codec *codec)
{
- return snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
+ int ret;
+
+ ret = snd_soc_write(codec, WM8962_SOFTWARE_RESET, 0x6243);
+ if (ret != 0)
+ return ret;
+
+ return snd_soc_write(codec, WM8962_PLL_SOFTWARE_RESET, 0);
}
static const DECLARE_TLV_DB_SCALE(inpga_tlv, -2325, 75, 0);
@@ -2360,15 +2366,14 @@
snd_soc_update_bits(codec, WM8962_FLL_CONTROL_1,
WM8962_FLL_ENA, WM8962_FLL_ENA);
- if (wm8962->irq) {
- timeout = msecs_to_jiffies(5);
- timeout = wait_for_completion_timeout(&wm8962->fll_lock,
- timeout);
- if (timeout == 0)
- dev_err(codec->dev,
- "Timed out starting FLL\n");
- }
+ timeout = msecs_to_jiffies(5);
+ timeout = wait_for_completion_timeout(&wm8962->fll_lock,
+ timeout);
+
+ if (wm8962->irq && timeout == 0)
+ dev_err(codec->dev,
+ "Timed out starting FLL\n");
}
break;
@@ -4029,6 +4034,11 @@
snd_soc_update_bits(codec, WM8962_CLOCKING2,
WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
+ /* Ensure that the oscillator and PLLs are disabled */
+ snd_soc_update_bits(codec, WM8962_PLL2,
+ WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
+ 0);
+
regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
if (pdata) {