| /* |
| * Toshiba TC86C001 ("Goku-S") USB Device Controller driver |
| * |
| * Copyright (C) 2000-2002 Lineo |
| * by Stuart Lynne, Tom Rushworth, and Bruce Balden |
| * Copyright (C) 2002 Toshiba Corporation |
| * Copyright (C) 2003 MontaVista Software (source@mvista.com) |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| /* |
| * This device has ep0 and three semi-configurable bulk/interrupt endpoints. |
| * |
| * - Endpoint numbering is fixed: ep{1,2,3}-bulk |
| * - Gadget drivers can choose ep maxpacket (8/16/32/64) |
| * - Gadget drivers can choose direction (IN, OUT) |
| * - DMA works with ep1 (OUT transfers) and ep2 (IN transfers). |
| */ |
| |
| // #define VERBOSE /* extra debug messages (success too) */ |
| // #define USB_TRACE /* packet-level success messages */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/timer.h> |
| #include <linux/list.h> |
| #include <linux/interrupt.h> |
| #include <linux/proc_fs.h> |
| #include <linux/device.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/prefetch.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| #include <asm/unaligned.h> |
| |
| |
| #include "goku_udc.h" |
| |
| #define DRIVER_DESC "TC86C001 USB Device Controller" |
| #define DRIVER_VERSION "30-Oct 2003" |
| |
| #define DMA_ADDR_INVALID (~(dma_addr_t)0) |
| |
| static const char driver_name [] = "goku_udc"; |
| static const char driver_desc [] = DRIVER_DESC; |
| |
| MODULE_AUTHOR("source@mvista.com"); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |
| |
| /* |
| * IN dma behaves ok under testing, though the IN-dma abort paths don't |
| * seem to behave quite as expected. Used by default. |
| * |
| * OUT dma documents design problems handling the common "short packet" |
| * transfer termination policy; it couldn't be enabled by default, even |
| * if the OUT-dma abort problems had a resolution. |
| */ |
| static unsigned use_dma = 1; |
| |
| #if 0 |
| //#include <linux/moduleparam.h> |
| /* "modprobe goku_udc use_dma=1" etc |
| * 0 to disable dma |
| * 1 to use IN dma only (normal operation) |
| * 2 to use IN and OUT dma |
| */ |
| module_param(use_dma, uint, S_IRUGO); |
| #endif |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void nuke(struct goku_ep *, int status); |
| |
| static inline void |
| command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum) |
| { |
| writel(COMMAND_EP(epnum) | command, ®s->Command); |
| udelay(300); |
| } |
| |
| static int |
| goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) |
| { |
| struct goku_udc *dev; |
| struct goku_ep *ep; |
| u32 mode; |
| u16 max; |
| unsigned long flags; |
| |
| ep = container_of(_ep, struct goku_ep, ep); |
| if (!_ep || !desc || ep->desc |
| || desc->bDescriptorType != USB_DT_ENDPOINT) |
| return -EINVAL; |
| dev = ep->dev; |
| if (ep == &dev->ep[0]) |
| return -EINVAL; |
| if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) |
| return -ESHUTDOWN; |
| if (ep->num != usb_endpoint_num(desc)) |
| return -EINVAL; |
| |
| switch (usb_endpoint_type(desc)) { |
| case USB_ENDPOINT_XFER_BULK: |
| case USB_ENDPOINT_XFER_INT: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK) |
| != EPxSTATUS_EP_INVALID) |
| return -EBUSY; |
| |
| /* enabling the no-toggle interrupt mode would need an api hook */ |
| mode = 0; |
| max = get_unaligned_le16(&desc->wMaxPacketSize); |
| switch (max) { |
| case 64: mode++; |
| case 32: mode++; |
| case 16: mode++; |
| case 8: mode <<= 3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| mode |= 2 << 1; /* bulk, or intr-with-toggle */ |
| |
| /* ep1/ep2 dma direction is chosen early; it works in the other |
| * direction, with pio. be cautious with out-dma. |
| */ |
| ep->is_in = usb_endpoint_dir_in(desc); |
| if (ep->is_in) { |
| mode |= 1; |
| ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT); |
| } else { |
| ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT); |
| if (ep->dma) |
| DBG(dev, "%s out-dma hides short packets\n", |
| ep->ep.name); |
| } |
| |
| spin_lock_irqsave(&ep->dev->lock, flags); |
| |
| /* ep1 and ep2 can do double buffering and/or dma */ |
| if (ep->num < 3) { |
| struct goku_udc_regs __iomem *regs = ep->dev->regs; |
| u32 tmp; |
| |
| /* double buffer except (for now) with pio in */ |
| tmp = ((ep->dma || !ep->is_in) |
| ? 0x10 /* double buffered */ |
| : 0x11 /* single buffer */ |
| ) << ep->num; |
| tmp |= readl(®s->EPxSingle); |
| writel(tmp, ®s->EPxSingle); |
| |
| tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num; |
| tmp |= readl(®s->EPxBCS); |
| writel(tmp, ®s->EPxBCS); |
| } |
| writel(mode, ep->reg_mode); |
| command(ep->dev->regs, COMMAND_RESET, ep->num); |
| ep->ep.maxpacket = max; |
| ep->stopped = 0; |
| ep->desc = desc; |
| spin_unlock_irqrestore(&ep->dev->lock, flags); |
| |
| DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name, |
| ep->is_in ? "IN" : "OUT", |
| ep->dma ? "dma" : "pio", |
| max); |
| |
| return 0; |
| } |
| |
| static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep) |
| { |
| struct goku_udc *dev = ep->dev; |
| |
| if (regs) { |
| command(regs, COMMAND_INVALID, ep->num); |
| if (ep->num) { |
| if (ep->num == UDC_MSTWR_ENDPOINT) |
| dev->int_enable &= ~(INT_MSTWREND |
| |INT_MSTWRTMOUT); |
| else if (ep->num == UDC_MSTRD_ENDPOINT) |
| dev->int_enable &= ~INT_MSTRDEND; |
| dev->int_enable &= ~INT_EPxDATASET (ep->num); |
| } else |
| dev->int_enable &= ~INT_EP0; |
| writel(dev->int_enable, ®s->int_enable); |
| readl(®s->int_enable); |
| if (ep->num < 3) { |
| struct goku_udc_regs __iomem *r = ep->dev->regs; |
| u32 tmp; |
| |
| tmp = readl(&r->EPxSingle); |
| tmp &= ~(0x11 << ep->num); |
| writel(tmp, &r->EPxSingle); |
| |
| tmp = readl(&r->EPxBCS); |
| tmp &= ~(0x11 << ep->num); |
| writel(tmp, &r->EPxBCS); |
| } |
| /* reset dma in case we're still using it */ |
| if (ep->dma) { |
| u32 master; |
| |
| master = readl(®s->dma_master) & MST_RW_BITS; |
| if (ep->num == UDC_MSTWR_ENDPOINT) { |
| master &= ~MST_W_BITS; |
| master |= MST_WR_RESET; |
| } else { |
| master &= ~MST_R_BITS; |
| master |= MST_RD_RESET; |
| } |
| writel(master, ®s->dma_master); |
| } |
| } |
| |
| ep->ep.maxpacket = MAX_FIFO_SIZE; |
| ep->desc = NULL; |
| ep->stopped = 1; |
| ep->irqs = 0; |
| ep->dma = 0; |
| } |
| |
| static int goku_ep_disable(struct usb_ep *_ep) |
| { |
| struct goku_ep *ep; |
| struct goku_udc *dev; |
| unsigned long flags; |
| |
| ep = container_of(_ep, struct goku_ep, ep); |
| if (!_ep || !ep->desc) |
| return -ENODEV; |
| dev = ep->dev; |
| if (dev->ep0state == EP0_SUSPEND) |
| return -EBUSY; |
| |
| VDBG(dev, "disable %s\n", _ep->name); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| nuke(ep, -ESHUTDOWN); |
| ep_reset(dev->regs, ep); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct usb_request * |
| goku_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) |
| { |
| struct goku_request *req; |
| |
| if (!_ep) |
| return NULL; |
| req = kzalloc(sizeof *req, gfp_flags); |
| if (!req) |
| return NULL; |
| |
| req->req.dma = DMA_ADDR_INVALID; |
| INIT_LIST_HEAD(&req->queue); |
| return &req->req; |
| } |
| |
| static void |
| goku_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct goku_request *req; |
| |
| if (!_ep || !_req) |
| return; |
| |
| req = container_of(_req, struct goku_request, req); |
| WARN_ON(!list_empty(&req->queue)); |
| kfree(req); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void |
| done(struct goku_ep *ep, struct goku_request *req, int status) |
| { |
| struct goku_udc *dev; |
| unsigned stopped = ep->stopped; |
| |
| list_del_init(&req->queue); |
| |
| if (likely(req->req.status == -EINPROGRESS)) |
| req->req.status = status; |
| else |
| status = req->req.status; |
| |
| dev = ep->dev; |
| if (req->mapped) { |
| pci_unmap_single(dev->pdev, req->req.dma, req->req.length, |
| ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); |
| req->req.dma = DMA_ADDR_INVALID; |
| req->mapped = 0; |
| } |
| |
| #ifndef USB_TRACE |
| if (status && status != -ESHUTDOWN) |
| #endif |
| VDBG(dev, "complete %s req %p stat %d len %u/%u\n", |
| ep->ep.name, &req->req, status, |
| req->req.actual, req->req.length); |
| |
| /* don't modify queue heads during completion callback */ |
| ep->stopped = 1; |
| spin_unlock(&dev->lock); |
| req->req.complete(&ep->ep, &req->req); |
| spin_lock(&dev->lock); |
| ep->stopped = stopped; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline int |
| write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max) |
| { |
| unsigned length, count; |
| |
| length = min(req->req.length - req->req.actual, max); |
| req->req.actual += length; |
| |
| count = length; |
| while (likely(count--)) |
| writel(*buf++, fifo); |
| return length; |
| } |
| |
| // return: 0 = still running, 1 = completed, negative = errno |
| static int write_fifo(struct goku_ep *ep, struct goku_request *req) |
| { |
| struct goku_udc *dev = ep->dev; |
| u32 tmp; |
| u8 *buf; |
| unsigned count; |
| int is_last; |
| |
| tmp = readl(&dev->regs->DataSet); |
| buf = req->req.buf + req->req.actual; |
| prefetch(buf); |
| |
| dev = ep->dev; |
| if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN)) |
| return -EL2HLT; |
| |
| /* NOTE: just single-buffered PIO-IN for now. */ |
| if (unlikely((tmp & DATASET_A(ep->num)) != 0)) |
| return 0; |
| |
| /* clear our "packet available" irq */ |
| if (ep->num != 0) |
| writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status); |
| |
| count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket); |
| |
| /* last packet often short (sometimes a zlp, especially on ep0) */ |
| if (unlikely(count != ep->ep.maxpacket)) { |
| writel(~(1<<ep->num), &dev->regs->EOP); |
| if (ep->num == 0) { |
| dev->ep[0].stopped = 1; |
| dev->ep0state = EP0_STATUS; |
| } |
| is_last = 1; |
| } else { |
| if (likely(req->req.length != req->req.actual) |
| || req->req.zero) |
| is_last = 0; |
| else |
| is_last = 1; |
| } |
| #if 0 /* printk seemed to trash is_last...*/ |
| //#ifdef USB_TRACE |
| VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n", |
| ep->ep.name, count, is_last ? "/last" : "", |
| req->req.length - req->req.actual, req); |
| #endif |
| |
| /* requests complete when all IN data is in the FIFO, |
| * or sometimes later, if a zlp was needed. |
| */ |
| if (is_last) { |
| done(ep, req, 0); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int read_fifo(struct goku_ep *ep, struct goku_request *req) |
| { |
| struct goku_udc_regs __iomem *regs; |
| u32 size, set; |
| u8 *buf; |
| unsigned bufferspace, is_short, dbuff; |
| |
| regs = ep->dev->regs; |
| top: |
| buf = req->req.buf + req->req.actual; |
| prefetchw(buf); |
| |
| if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT)) |
| return -EL2HLT; |
| |
| dbuff = (ep->num == 1 || ep->num == 2); |
| do { |
| /* ack dataset irq matching the status we'll handle */ |
| if (ep->num != 0) |
| writel(~INT_EPxDATASET(ep->num), ®s->int_status); |
| |
| set = readl(®s->DataSet) & DATASET_AB(ep->num); |
| size = readl(®s->EPxSizeLA[ep->num]); |
| bufferspace = req->req.length - req->req.actual; |
| |
| /* usually do nothing without an OUT packet */ |
| if (likely(ep->num != 0 || bufferspace != 0)) { |
| if (unlikely(set == 0)) |
| break; |
| /* use ep1/ep2 double-buffering for OUT */ |
| if (!(size & PACKET_ACTIVE)) |
| size = readl(®s->EPxSizeLB[ep->num]); |
| if (!(size & PACKET_ACTIVE)) /* "can't happen" */ |
| break; |
| size &= DATASIZE; /* EPxSizeH == 0 */ |
| |
| /* ep0out no-out-data case for set_config, etc */ |
| } else |
| size = 0; |
| |
| /* read all bytes from this packet */ |
| req->req.actual += size; |
| is_short = (size < ep->ep.maxpacket); |
| #ifdef USB_TRACE |
| VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n", |
| ep->ep.name, size, is_short ? "/S" : "", |
| req, req->req.actual, req->req.length); |
| #endif |
| while (likely(size-- != 0)) { |
| u8 byte = (u8) readl(ep->reg_fifo); |
| |
| if (unlikely(bufferspace == 0)) { |
| /* this happens when the driver's buffer |
| * is smaller than what the host sent. |
| * discard the extra data in this packet. |
| */ |
| if (req->req.status != -EOVERFLOW) |
| DBG(ep->dev, "%s overflow %u\n", |
| ep->ep.name, size); |
| req->req.status = -EOVERFLOW; |
| } else { |
| *buf++ = byte; |
| bufferspace--; |
| } |
| } |
| |
| /* completion */ |
| if (unlikely(is_short || req->req.actual == req->req.length)) { |
| if (unlikely(ep->num == 0)) { |
| /* non-control endpoints now usable? */ |
| if (ep->dev->req_config) |
| writel(ep->dev->configured |
| ? USBSTATE_CONFIGURED |
| : 0, |
| ®s->UsbState); |
| /* ep0out status stage */ |
| writel(~(1<<0), ®s->EOP); |
| ep->stopped = 1; |
| ep->dev->ep0state = EP0_STATUS; |
| } |
| done(ep, req, 0); |
| |
| /* empty the second buffer asap */ |
| if (dbuff && !list_empty(&ep->queue)) { |
| req = list_entry(ep->queue.next, |
| struct goku_request, queue); |
| goto top; |
| } |
| return 1; |
| } |
| } while (dbuff); |
| return 0; |
| } |
| |
| static inline void |
| pio_irq_enable(struct goku_udc *dev, |
| struct goku_udc_regs __iomem *regs, int epnum) |
| { |
| dev->int_enable |= INT_EPxDATASET (epnum); |
| writel(dev->int_enable, ®s->int_enable); |
| /* write may still be posted */ |
| } |
| |
| static inline void |
| pio_irq_disable(struct goku_udc *dev, |
| struct goku_udc_regs __iomem *regs, int epnum) |
| { |
| dev->int_enable &= ~INT_EPxDATASET (epnum); |
| writel(dev->int_enable, ®s->int_enable); |
| /* write may still be posted */ |
| } |
| |
| static inline void |
| pio_advance(struct goku_ep *ep) |
| { |
| struct goku_request *req; |
| |
| if (unlikely(list_empty (&ep->queue))) |
| return; |
| req = list_entry(ep->queue.next, struct goku_request, queue); |
| (ep->is_in ? write_fifo : read_fifo)(ep, req); |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| // return: 0 = q running, 1 = q stopped, negative = errno |
| static int start_dma(struct goku_ep *ep, struct goku_request *req) |
| { |
| struct goku_udc_regs __iomem *regs = ep->dev->regs; |
| u32 master; |
| u32 start = req->req.dma; |
| u32 end = start + req->req.length - 1; |
| |
| master = readl(®s->dma_master) & MST_RW_BITS; |
| |
| /* re-init the bits affecting IN dma; careful with zlps */ |
| if (likely(ep->is_in)) { |
| if (unlikely(master & MST_RD_ENA)) { |
| DBG (ep->dev, "start, IN active dma %03x!!\n", |
| master); |
| // return -EL2HLT; |
| } |
| writel(end, ®s->in_dma_end); |
| writel(start, ®s->in_dma_start); |
| |
| master &= ~MST_R_BITS; |
| if (unlikely(req->req.length == 0)) |
| master = MST_RD_ENA | MST_RD_EOPB; |
| else if ((req->req.length % ep->ep.maxpacket) != 0 |
| || req->req.zero) |
| master = MST_RD_ENA | MST_EOPB_ENA; |
| else |
| master = MST_RD_ENA | MST_EOPB_DIS; |
| |
| ep->dev->int_enable |= INT_MSTRDEND; |
| |
| /* Goku DMA-OUT merges short packets, which plays poorly with |
| * protocols where short packets mark the transfer boundaries. |
| * The chip supports a nonstandard policy with INT_MSTWRTMOUT, |
| * ending transfers after 3 SOFs; we don't turn it on. |
| */ |
| } else { |
| if (unlikely(master & MST_WR_ENA)) { |
| DBG (ep->dev, "start, OUT active dma %03x!!\n", |
| master); |
| // return -EL2HLT; |
| } |
| writel(end, ®s->out_dma_end); |
| writel(start, ®s->out_dma_start); |
| |
| master &= ~MST_W_BITS; |
| master |= MST_WR_ENA | MST_TIMEOUT_DIS; |
| |
| ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT; |
| } |
| |
| writel(master, ®s->dma_master); |
| writel(ep->dev->int_enable, ®s->int_enable); |
| return 0; |
| } |
| |
| static void dma_advance(struct goku_udc *dev, struct goku_ep *ep) |
| { |
| struct goku_request *req; |
| struct goku_udc_regs __iomem *regs = ep->dev->regs; |
| u32 master; |
| |
| master = readl(®s->dma_master); |
| |
| if (unlikely(list_empty(&ep->queue))) { |
| stop: |
| if (ep->is_in) |
| dev->int_enable &= ~INT_MSTRDEND; |
| else |
| dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT); |
| writel(dev->int_enable, ®s->int_enable); |
| return; |
| } |
| req = list_entry(ep->queue.next, struct goku_request, queue); |
| |
| /* normal hw dma completion (not abort) */ |
| if (likely(ep->is_in)) { |
| if (unlikely(master & MST_RD_ENA)) |
| return; |
| req->req.actual = readl(®s->in_dma_current); |
| } else { |
| if (unlikely(master & MST_WR_ENA)) |
| return; |
| |
| /* hardware merges short packets, and also hides packet |
| * overruns. a partial packet MAY be in the fifo here. |
| */ |
| req->req.actual = readl(®s->out_dma_current); |
| } |
| req->req.actual -= req->req.dma; |
| req->req.actual++; |
| |
| #ifdef USB_TRACE |
| VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n", |
| ep->ep.name, ep->is_in ? "IN" : "OUT", |
| req->req.actual, req->req.length, req); |
| #endif |
| done(ep, req, 0); |
| if (list_empty(&ep->queue)) |
| goto stop; |
| req = list_entry(ep->queue.next, struct goku_request, queue); |
| (void) start_dma(ep, req); |
| } |
| |
| static void abort_dma(struct goku_ep *ep, int status) |
| { |
| struct goku_udc_regs __iomem *regs = ep->dev->regs; |
| struct goku_request *req; |
| u32 curr, master; |
| |
| /* NAK future host requests, hoping the implicit delay lets the |
| * dma engine finish reading (or writing) its latest packet and |
| * empty the dma buffer (up to 16 bytes). |
| * |
| * This avoids needing to clean up a partial packet in the fifo; |
| * we can't do that for IN without side effects to HALT and TOGGLE. |
| */ |
| command(regs, COMMAND_FIFO_DISABLE, ep->num); |
| req = list_entry(ep->queue.next, struct goku_request, queue); |
| master = readl(®s->dma_master) & MST_RW_BITS; |
| |
| /* FIXME using these resets isn't usably documented. this may |
| * not work unless it's followed by disabling the endpoint. |
| * |
| * FIXME the OUT reset path doesn't even behave consistently. |
| */ |
| if (ep->is_in) { |
| if (unlikely((readl(®s->dma_master) & MST_RD_ENA) == 0)) |
| goto finished; |
| curr = readl(®s->in_dma_current); |
| |
| writel(curr, ®s->in_dma_end); |
| writel(curr, ®s->in_dma_start); |
| |
| master &= ~MST_R_BITS; |
| master |= MST_RD_RESET; |
| writel(master, ®s->dma_master); |
| |
| if (readl(®s->dma_master) & MST_RD_ENA) |
| DBG(ep->dev, "IN dma active after reset!\n"); |
| |
| } else { |
| if (unlikely((readl(®s->dma_master) & MST_WR_ENA) == 0)) |
| goto finished; |
| curr = readl(®s->out_dma_current); |
| |
| writel(curr, ®s->out_dma_end); |
| writel(curr, ®s->out_dma_start); |
| |
| master &= ~MST_W_BITS; |
| master |= MST_WR_RESET; |
| writel(master, ®s->dma_master); |
| |
| if (readl(®s->dma_master) & MST_WR_ENA) |
| DBG(ep->dev, "OUT dma active after reset!\n"); |
| } |
| req->req.actual = (curr - req->req.dma) + 1; |
| req->req.status = status; |
| |
| VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name, |
| ep->is_in ? "IN" : "OUT", |
| req->req.actual, req->req.length); |
| |
| command(regs, COMMAND_FIFO_ENABLE, ep->num); |
| |
| return; |
| |
| finished: |
| /* dma already completed; no abort needed */ |
| command(regs, COMMAND_FIFO_ENABLE, ep->num); |
| req->req.actual = req->req.length; |
| req->req.status = 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int |
| goku_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) |
| { |
| struct goku_request *req; |
| struct goku_ep *ep; |
| struct goku_udc *dev; |
| unsigned long flags; |
| int status; |
| |
| /* always require a cpu-view buffer so pio works */ |
| req = container_of(_req, struct goku_request, req); |
| if (unlikely(!_req || !_req->complete |
| || !_req->buf || !list_empty(&req->queue))) |
| return -EINVAL; |
| ep = container_of(_ep, struct goku_ep, ep); |
| if (unlikely(!_ep || (!ep->desc && ep->num != 0))) |
| return -EINVAL; |
| dev = ep->dev; |
| if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) |
| return -ESHUTDOWN; |
| |
| /* can't touch registers when suspended */ |
| if (dev->ep0state == EP0_SUSPEND) |
| return -EBUSY; |
| |
| /* set up dma mapping in case the caller didn't */ |
| if (ep->dma && _req->dma == DMA_ADDR_INVALID) { |
| _req->dma = pci_map_single(dev->pdev, _req->buf, _req->length, |
| ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE); |
| req->mapped = 1; |
| } |
| |
| #ifdef USB_TRACE |
| VDBG(dev, "%s queue req %p, len %u buf %p\n", |
| _ep->name, _req, _req->length, _req->buf); |
| #endif |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| _req->status = -EINPROGRESS; |
| _req->actual = 0; |
| |
| /* for ep0 IN without premature status, zlp is required and |
| * writing EOP starts the status stage (OUT). |
| */ |
| if (unlikely(ep->num == 0 && ep->is_in)) |
| _req->zero = 1; |
| |
| /* kickstart this i/o queue? */ |
| status = 0; |
| if (list_empty(&ep->queue) && likely(!ep->stopped)) { |
| /* dma: done after dma completion IRQ (or error) |
| * pio: done after last fifo operation |
| */ |
| if (ep->dma) |
| status = start_dma(ep, req); |
| else |
| status = (ep->is_in ? write_fifo : read_fifo)(ep, req); |
| |
| if (unlikely(status != 0)) { |
| if (status > 0) |
| status = 0; |
| req = NULL; |
| } |
| |
| } /* else pio or dma irq handler advances the queue. */ |
| |
| if (likely(req != 0)) |
| list_add_tail(&req->queue, &ep->queue); |
| |
| if (likely(!list_empty(&ep->queue)) |
| && likely(ep->num != 0) |
| && !ep->dma |
| && !(dev->int_enable & INT_EPxDATASET (ep->num))) |
| pio_irq_enable(dev, dev->regs, ep->num); |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| /* pci writes may still be posted */ |
| return status; |
| } |
| |
| /* dequeue ALL requests */ |
| static void nuke(struct goku_ep *ep, int status) |
| { |
| struct goku_request *req; |
| |
| ep->stopped = 1; |
| if (list_empty(&ep->queue)) |
| return; |
| if (ep->dma) |
| abort_dma(ep, status); |
| while (!list_empty(&ep->queue)) { |
| req = list_entry(ep->queue.next, struct goku_request, queue); |
| done(ep, req, status); |
| } |
| } |
| |
| /* dequeue JUST ONE request */ |
| static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct goku_request *req; |
| struct goku_ep *ep; |
| struct goku_udc *dev; |
| unsigned long flags; |
| |
| ep = container_of(_ep, struct goku_ep, ep); |
| if (!_ep || !_req || (!ep->desc && ep->num != 0)) |
| return -EINVAL; |
| dev = ep->dev; |
| if (!dev->driver) |
| return -ESHUTDOWN; |
| |
| /* we can't touch (dma) registers when suspended */ |
| if (dev->ep0state == EP0_SUSPEND) |
| return -EBUSY; |
| |
| VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name, |
| ep->is_in ? "IN" : "OUT", |
| ep->dma ? "dma" : "pio", |
| _req); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| /* make sure it's actually queued on this endpoint */ |
| list_for_each_entry (req, &ep->queue, queue) { |
| if (&req->req == _req) |
| break; |
| } |
| if (&req->req != _req) { |
| spin_unlock_irqrestore (&dev->lock, flags); |
| return -EINVAL; |
| } |
| |
| if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) { |
| abort_dma(ep, -ECONNRESET); |
| done(ep, req, -ECONNRESET); |
| dma_advance(dev, ep); |
| } else if (!list_empty(&req->queue)) |
| done(ep, req, -ECONNRESET); |
| else |
| req = NULL; |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return req ? 0 : -EOPNOTSUPP; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void goku_clear_halt(struct goku_ep *ep) |
| { |
| // assert (ep->num !=0) |
| VDBG(ep->dev, "%s clear halt\n", ep->ep.name); |
| command(ep->dev->regs, COMMAND_SETDATA0, ep->num); |
| command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num); |
| if (ep->stopped) { |
| ep->stopped = 0; |
| if (ep->dma) { |
| struct goku_request *req; |
| |
| if (list_empty(&ep->queue)) |
| return; |
| req = list_entry(ep->queue.next, struct goku_request, |
| queue); |
| (void) start_dma(ep, req); |
| } else |
| pio_advance(ep); |
| } |
| } |
| |
| static int goku_set_halt(struct usb_ep *_ep, int value) |
| { |
| struct goku_ep *ep; |
| unsigned long flags; |
| int retval = 0; |
| |
| if (!_ep) |
| return -ENODEV; |
| ep = container_of (_ep, struct goku_ep, ep); |
| |
| if (ep->num == 0) { |
| if (value) { |
| ep->dev->ep0state = EP0_STALL; |
| ep->dev->ep[0].stopped = 1; |
| } else |
| return -EINVAL; |
| |
| /* don't change EPxSTATUS_EP_INVALID to READY */ |
| } else if (!ep->desc) { |
| DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&ep->dev->lock, flags); |
| if (!list_empty(&ep->queue)) |
| retval = -EAGAIN; |
| else if (ep->is_in && value |
| /* data in (either) packet buffer? */ |
| && (readl(&ep->dev->regs->DataSet) |
| & DATASET_AB(ep->num))) |
| retval = -EAGAIN; |
| else if (!value) |
| goku_clear_halt(ep); |
| else { |
| ep->stopped = 1; |
| VDBG(ep->dev, "%s set halt\n", ep->ep.name); |
| command(ep->dev->regs, COMMAND_STALL, ep->num); |
| readl(ep->reg_status); |
| } |
| spin_unlock_irqrestore(&ep->dev->lock, flags); |
| return retval; |
| } |
| |
| static int goku_fifo_status(struct usb_ep *_ep) |
| { |
| struct goku_ep *ep; |
| struct goku_udc_regs __iomem *regs; |
| u32 size; |
| |
| if (!_ep) |
| return -ENODEV; |
| ep = container_of(_ep, struct goku_ep, ep); |
| |
| /* size is only reported sanely for OUT */ |
| if (ep->is_in) |
| return -EOPNOTSUPP; |
| |
| /* ignores 16-byte dma buffer; SizeH == 0 */ |
| regs = ep->dev->regs; |
| size = readl(®s->EPxSizeLA[ep->num]) & DATASIZE; |
| size += readl(®s->EPxSizeLB[ep->num]) & DATASIZE; |
| VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size); |
| return size; |
| } |
| |
| static void goku_fifo_flush(struct usb_ep *_ep) |
| { |
| struct goku_ep *ep; |
| struct goku_udc_regs __iomem *regs; |
| u32 size; |
| |
| if (!_ep) |
| return; |
| ep = container_of(_ep, struct goku_ep, ep); |
| VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name); |
| |
| /* don't change EPxSTATUS_EP_INVALID to READY */ |
| if (!ep->desc && ep->num != 0) { |
| DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name); |
| return; |
| } |
| |
| regs = ep->dev->regs; |
| size = readl(®s->EPxSizeLA[ep->num]); |
| size &= DATASIZE; |
| |
| /* Non-desirable behavior: FIFO_CLEAR also clears the |
| * endpoint halt feature. For OUT, we _could_ just read |
| * the bytes out (PIO, if !ep->dma); for in, no choice. |
| */ |
| if (size) |
| command(regs, COMMAND_FIFO_CLEAR, ep->num); |
| } |
| |
| static struct usb_ep_ops goku_ep_ops = { |
| .enable = goku_ep_enable, |
| .disable = goku_ep_disable, |
| |
| .alloc_request = goku_alloc_request, |
| .free_request = goku_free_request, |
| |
| .queue = goku_queue, |
| .dequeue = goku_dequeue, |
| |
| .set_halt = goku_set_halt, |
| .fifo_status = goku_fifo_status, |
| .fifo_flush = goku_fifo_flush, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int goku_get_frame(struct usb_gadget *_gadget) |
| { |
| return -EOPNOTSUPP; |
| } |
| |
| static int goku_start(struct usb_gadget_driver *driver, |
| int (*bind)(struct usb_gadget *)); |
| static int goku_stop(struct usb_gadget_driver *driver); |
| |
| static const struct usb_gadget_ops goku_ops = { |
| .get_frame = goku_get_frame, |
| .start = goku_start, |
| .stop = goku_stop, |
| // no remote wakeup |
| // not selfpowered |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline char *dmastr(void) |
| { |
| if (use_dma == 0) |
| return "(dma disabled)"; |
| else if (use_dma == 2) |
| return "(dma IN and OUT)"; |
| else |
| return "(dma IN)"; |
| } |
| |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| |
| static const char proc_node_name [] = "driver/udc"; |
| |
| #define FOURBITS "%s%s%s%s" |
| #define EIGHTBITS FOURBITS FOURBITS |
| |
| static void |
| dump_intmask(const char *label, u32 mask, char **next, unsigned *size) |
| { |
| int t; |
| |
| /* int_status is the same format ... */ |
| t = scnprintf(*next, *size, |
| "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n", |
| label, mask, |
| (mask & INT_PWRDETECT) ? " power" : "", |
| (mask & INT_SYSERROR) ? " sys" : "", |
| (mask & INT_MSTRDEND) ? " in-dma" : "", |
| (mask & INT_MSTWRTMOUT) ? " wrtmo" : "", |
| |
| (mask & INT_MSTWREND) ? " out-dma" : "", |
| (mask & INT_MSTWRSET) ? " wrset" : "", |
| (mask & INT_ERR) ? " err" : "", |
| (mask & INT_SOF) ? " sof" : "", |
| |
| (mask & INT_EP3NAK) ? " ep3nak" : "", |
| (mask & INT_EP2NAK) ? " ep2nak" : "", |
| (mask & INT_EP1NAK) ? " ep1nak" : "", |
| (mask & INT_EP3DATASET) ? " ep3" : "", |
| |
| (mask & INT_EP2DATASET) ? " ep2" : "", |
| (mask & INT_EP1DATASET) ? " ep1" : "", |
| (mask & INT_STATUSNAK) ? " ep0snak" : "", |
| (mask & INT_STATUS) ? " ep0status" : "", |
| |
| (mask & INT_SETUP) ? " setup" : "", |
| (mask & INT_ENDPOINT0) ? " ep0" : "", |
| (mask & INT_USBRESET) ? " reset" : "", |
| (mask & INT_SUSPEND) ? " suspend" : ""); |
| *size -= t; |
| *next += t; |
| } |
| |
| |
| static int |
| udc_proc_read(char *buffer, char **start, off_t off, int count, |
| int *eof, void *_dev) |
| { |
| char *buf = buffer; |
| struct goku_udc *dev = _dev; |
| struct goku_udc_regs __iomem *regs = dev->regs; |
| char *next = buf; |
| unsigned size = count; |
| unsigned long flags; |
| int i, t, is_usb_connected; |
| u32 tmp; |
| |
| if (off != 0) |
| return 0; |
| |
| local_irq_save(flags); |
| |
| /* basic device status */ |
| tmp = readl(®s->power_detect); |
| is_usb_connected = tmp & PW_DETECT; |
| t = scnprintf(next, size, |
| "%s - %s\n" |
| "%s version: %s %s\n" |
| "Gadget driver: %s\n" |
| "Host %s, %s\n" |
| "\n", |
| pci_name(dev->pdev), driver_desc, |
| driver_name, DRIVER_VERSION, dmastr(), |
| dev->driver ? dev->driver->driver.name : "(none)", |
| is_usb_connected |
| ? ((tmp & PW_PULLUP) ? "full speed" : "powered") |
| : "disconnected", |
| ({char *state; |
| switch(dev->ep0state){ |
| case EP0_DISCONNECT: state = "ep0_disconnect"; break; |
| case EP0_IDLE: state = "ep0_idle"; break; |
| case EP0_IN: state = "ep0_in"; break; |
| case EP0_OUT: state = "ep0_out"; break; |
| case EP0_STATUS: state = "ep0_status"; break; |
| case EP0_STALL: state = "ep0_stall"; break; |
| case EP0_SUSPEND: state = "ep0_suspend"; break; |
| default: state = "ep0_?"; break; |
| } state; }) |
| ); |
| size -= t; |
| next += t; |
| |
| dump_intmask("int_status", readl(®s->int_status), &next, &size); |
| dump_intmask("int_enable", readl(®s->int_enable), &next, &size); |
| |
| if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0) |
| goto done; |
| |
| /* registers for (active) device and ep0 */ |
| t = scnprintf(next, size, "\nirqs %lu\ndataset %02x " |
| "single.bcs %02x.%02x state %x addr %u\n", |
| dev->irqs, readl(®s->DataSet), |
| readl(®s->EPxSingle), readl(®s->EPxBCS), |
| readl(®s->UsbState), |
| readl(®s->address)); |
| size -= t; |
| next += t; |
| |
| tmp = readl(®s->dma_master); |
| t = scnprintf(next, size, |
| "dma %03X =" EIGHTBITS "%s %s\n", tmp, |
| (tmp & MST_EOPB_DIS) ? " eopb-" : "", |
| (tmp & MST_EOPB_ENA) ? " eopb+" : "", |
| (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "", |
| (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "", |
| |
| (tmp & MST_RD_EOPB) ? " eopb" : "", |
| (tmp & MST_RD_RESET) ? " in_reset" : "", |
| (tmp & MST_WR_RESET) ? " out_reset" : "", |
| (tmp & MST_RD_ENA) ? " IN" : "", |
| |
| (tmp & MST_WR_ENA) ? " OUT" : "", |
| (tmp & MST_CONNECTION) |
| ? "ep1in/ep2out" |
| : "ep1out/ep2in"); |
| size -= t; |
| next += t; |
| |
| /* dump endpoint queues */ |
| for (i = 0; i < 4; i++) { |
| struct goku_ep *ep = &dev->ep [i]; |
| struct goku_request *req; |
| |
| if (i && !ep->desc) |
| continue; |
| |
| tmp = readl(ep->reg_status); |
| t = scnprintf(next, size, |
| "%s %s max %u %s, irqs %lu, " |
| "status %02x (%s) " FOURBITS "\n", |
| ep->ep.name, |
| ep->is_in ? "in" : "out", |
| ep->ep.maxpacket, |
| ep->dma ? "dma" : "pio", |
| ep->irqs, |
| tmp, ({ char *s; |
| switch (tmp & EPxSTATUS_EP_MASK) { |
| case EPxSTATUS_EP_READY: |
| s = "ready"; break; |
| case EPxSTATUS_EP_DATAIN: |
| s = "packet"; break; |
| case EPxSTATUS_EP_FULL: |
| s = "full"; break; |
| case EPxSTATUS_EP_TX_ERR: // host will retry |
| s = "tx_err"; break; |
| case EPxSTATUS_EP_RX_ERR: |
| s = "rx_err"; break; |
| case EPxSTATUS_EP_BUSY: /* ep0 only */ |
| s = "busy"; break; |
| case EPxSTATUS_EP_STALL: |
| s = "stall"; break; |
| case EPxSTATUS_EP_INVALID: // these "can't happen" |
| s = "invalid"; break; |
| default: |
| s = "?"; break; |
| }; s; }), |
| (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0", |
| (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "", |
| (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "", |
| (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : "" |
| ); |
| if (t <= 0 || t > size) |
| goto done; |
| size -= t; |
| next += t; |
| |
| if (list_empty(&ep->queue)) { |
| t = scnprintf(next, size, "\t(nothing queued)\n"); |
| if (t <= 0 || t > size) |
| goto done; |
| size -= t; |
| next += t; |
| continue; |
| } |
| list_for_each_entry(req, &ep->queue, queue) { |
| if (ep->dma && req->queue.prev == &ep->queue) { |
| if (i == UDC_MSTRD_ENDPOINT) |
| tmp = readl(®s->in_dma_current); |
| else |
| tmp = readl(®s->out_dma_current); |
| tmp -= req->req.dma; |
| tmp++; |
| } else |
| tmp = req->req.actual; |
| |
| t = scnprintf(next, size, |
| "\treq %p len %u/%u buf %p\n", |
| &req->req, tmp, req->req.length, |
| req->req.buf); |
| if (t <= 0 || t > size) |
| goto done; |
| size -= t; |
| next += t; |
| } |
| } |
| |
| done: |
| local_irq_restore(flags); |
| *eof = 1; |
| return count - size; |
| } |
| |
| #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void udc_reinit (struct goku_udc *dev) |
| { |
| static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" }; |
| |
| unsigned i; |
| |
| INIT_LIST_HEAD (&dev->gadget.ep_list); |
| dev->gadget.ep0 = &dev->ep [0].ep; |
| dev->gadget.speed = USB_SPEED_UNKNOWN; |
| dev->ep0state = EP0_DISCONNECT; |
| dev->irqs = 0; |
| |
| for (i = 0; i < 4; i++) { |
| struct goku_ep *ep = &dev->ep[i]; |
| |
| ep->num = i; |
| ep->ep.name = names[i]; |
| ep->reg_fifo = &dev->regs->ep_fifo [i]; |
| ep->reg_status = &dev->regs->ep_status [i]; |
| ep->reg_mode = &dev->regs->ep_mode[i]; |
| |
| ep->ep.ops = &goku_ep_ops; |
| list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); |
| ep->dev = dev; |
| INIT_LIST_HEAD (&ep->queue); |
| |
| ep_reset(NULL, ep); |
| } |
| |
| dev->ep[0].reg_mode = NULL; |
| dev->ep[0].ep.maxpacket = MAX_EP0_SIZE; |
| list_del_init (&dev->ep[0].ep.ep_list); |
| } |
| |
| static void udc_reset(struct goku_udc *dev) |
| { |
| struct goku_udc_regs __iomem *regs = dev->regs; |
| |
| writel(0, ®s->power_detect); |
| writel(0, ®s->int_enable); |
| readl(®s->int_enable); |
| dev->int_enable = 0; |
| |
| /* deassert reset, leave USB D+ at hi-Z (no pullup) |
| * don't let INT_PWRDETECT sequence begin |
| */ |
| udelay(250); |
| writel(PW_RESETB, ®s->power_detect); |
| readl(®s->int_enable); |
| } |
| |
| static void ep0_start(struct goku_udc *dev) |
| { |
| struct goku_udc_regs __iomem *regs = dev->regs; |
| unsigned i; |
| |
| VDBG(dev, "%s\n", __func__); |
| |
| udc_reset(dev); |
| udc_reinit (dev); |
| //writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, ®s->dma_master); |
| |
| /* hw handles set_address, set_feature, get_status; maybe more */ |
| writel( G_REQMODE_SET_INTF | G_REQMODE_GET_INTF |
| | G_REQMODE_SET_CONF | G_REQMODE_GET_CONF |
| | G_REQMODE_GET_DESC |
| | G_REQMODE_CLEAR_FEAT |
| , ®s->reqmode); |
| |
| for (i = 0; i < 4; i++) |
| dev->ep[i].irqs = 0; |
| |
| /* can't modify descriptors after writing UsbReady */ |
| for (i = 0; i < DESC_LEN; i++) |
| writel(0, ®s->descriptors[i]); |
| writel(0, ®s->UsbReady); |
| |
| /* expect ep0 requests when the host drops reset */ |
| writel(PW_RESETB | PW_PULLUP, ®s->power_detect); |
| dev->int_enable = INT_DEVWIDE | INT_EP0; |
| writel(dev->int_enable, &dev->regs->int_enable); |
| readl(®s->int_enable); |
| dev->gadget.speed = USB_SPEED_FULL; |
| dev->ep0state = EP0_IDLE; |
| } |
| |
| static void udc_enable(struct goku_udc *dev) |
| { |
| /* start enumeration now, or after power detect irq */ |
| if (readl(&dev->regs->power_detect) & PW_DETECT) |
| ep0_start(dev); |
| else { |
| DBG(dev, "%s\n", __func__); |
| dev->int_enable = INT_PWRDETECT; |
| writel(dev->int_enable, &dev->regs->int_enable); |
| } |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* keeping it simple: |
| * - one bus driver, initted first; |
| * - one function driver, initted second |
| */ |
| |
| static struct goku_udc *the_controller; |
| |
| /* when a driver is successfully registered, it will receive |
| * control requests including set_configuration(), which enables |
| * non-control requests. then usb traffic follows until a |
| * disconnect is reported. then a host may connect again, or |
| * the driver might get unbound. |
| */ |
| static int goku_start(struct usb_gadget_driver *driver, |
| int (*bind)(struct usb_gadget *)) |
| { |
| struct goku_udc *dev = the_controller; |
| int retval; |
| |
| if (!driver |
| || driver->max_speed < USB_SPEED_FULL |
| || !bind |
| || !driver->disconnect |
| || !driver->setup) |
| return -EINVAL; |
| if (!dev) |
| return -ENODEV; |
| if (dev->driver) |
| return -EBUSY; |
| |
| /* hook up the driver */ |
| driver->driver.bus = NULL; |
| dev->driver = driver; |
| dev->gadget.dev.driver = &driver->driver; |
| retval = bind(&dev->gadget); |
| if (retval) { |
| DBG(dev, "bind to driver %s --> error %d\n", |
| driver->driver.name, retval); |
| dev->driver = NULL; |
| dev->gadget.dev.driver = NULL; |
| return retval; |
| } |
| |
| /* then enable host detection and ep0; and we're ready |
| * for set_configuration as well as eventual disconnect. |
| */ |
| udc_enable(dev); |
| |
| DBG(dev, "registered gadget driver '%s'\n", driver->driver.name); |
| return 0; |
| } |
| |
| static void |
| stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver) |
| { |
| unsigned i; |
| |
| DBG (dev, "%s\n", __func__); |
| |
| if (dev->gadget.speed == USB_SPEED_UNKNOWN) |
| driver = NULL; |
| |
| /* disconnect gadget driver after quiesceing hw and the driver */ |
| udc_reset (dev); |
| for (i = 0; i < 4; i++) |
| nuke(&dev->ep [i], -ESHUTDOWN); |
| if (driver) { |
| spin_unlock(&dev->lock); |
| driver->disconnect(&dev->gadget); |
| spin_lock(&dev->lock); |
| } |
| |
| if (dev->driver) |
| udc_enable(dev); |
| } |
| |
| static int goku_stop(struct usb_gadget_driver *driver) |
| { |
| struct goku_udc *dev = the_controller; |
| unsigned long flags; |
| |
| if (!dev) |
| return -ENODEV; |
| if (!driver || driver != dev->driver || !driver->unbind) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| dev->driver = NULL; |
| stop_activity(dev, driver); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| driver->unbind(&dev->gadget); |
| dev->gadget.dev.driver = NULL; |
| |
| DBG(dev, "unregistered driver '%s'\n", driver->driver.name); |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void ep0_setup(struct goku_udc *dev) |
| { |
| struct goku_udc_regs __iomem *regs = dev->regs; |
| struct usb_ctrlrequest ctrl; |
| int tmp; |
| |
| /* read SETUP packet and enter DATA stage */ |
| ctrl.bRequestType = readl(®s->bRequestType); |
| ctrl.bRequest = readl(®s->bRequest); |
| ctrl.wValue = cpu_to_le16((readl(®s->wValueH) << 8) |
| | readl(®s->wValueL)); |
| ctrl.wIndex = cpu_to_le16((readl(®s->wIndexH) << 8) |
| | readl(®s->wIndexL)); |
| ctrl.wLength = cpu_to_le16((readl(®s->wLengthH) << 8) |
| | readl(®s->wLengthL)); |
| writel(0, ®s->SetupRecv); |
| |
| nuke(&dev->ep[0], 0); |
| dev->ep[0].stopped = 0; |
| if (likely(ctrl.bRequestType & USB_DIR_IN)) { |
| dev->ep[0].is_in = 1; |
| dev->ep0state = EP0_IN; |
| /* detect early status stages */ |
| writel(ICONTROL_STATUSNAK, &dev->regs->IntControl); |
| } else { |
| dev->ep[0].is_in = 0; |
| dev->ep0state = EP0_OUT; |
| |
| /* NOTE: CLEAR_FEATURE is done in software so that we can |
| * synchronize transfer restarts after bulk IN stalls. data |
| * won't even enter the fifo until the halt is cleared. |
| */ |
| switch (ctrl.bRequest) { |
| case USB_REQ_CLEAR_FEATURE: |
| switch (ctrl.bRequestType) { |
| case USB_RECIP_ENDPOINT: |
| tmp = le16_to_cpu(ctrl.wIndex) & 0x0f; |
| /* active endpoint */ |
| if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0)) |
| goto stall; |
| if (ctrl.wIndex & cpu_to_le16( |
| USB_DIR_IN)) { |
| if (!dev->ep[tmp].is_in) |
| goto stall; |
| } else { |
| if (dev->ep[tmp].is_in) |
| goto stall; |
| } |
| if (ctrl.wValue != cpu_to_le16( |
| USB_ENDPOINT_HALT)) |
| goto stall; |
| if (tmp) |
| goku_clear_halt(&dev->ep[tmp]); |
| succeed: |
| /* start ep0out status stage */ |
| writel(~(1<<0), ®s->EOP); |
| dev->ep[0].stopped = 1; |
| dev->ep0state = EP0_STATUS; |
| return; |
| case USB_RECIP_DEVICE: |
| /* device remote wakeup: always clear */ |
| if (ctrl.wValue != cpu_to_le16(1)) |
| goto stall; |
| VDBG(dev, "clear dev remote wakeup\n"); |
| goto succeed; |
| case USB_RECIP_INTERFACE: |
| goto stall; |
| default: /* pass to gadget driver */ |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| #ifdef USB_TRACE |
| VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", |
| ctrl.bRequestType, ctrl.bRequest, |
| le16_to_cpu(ctrl.wValue), le16_to_cpu(ctrl.wIndex), |
| le16_to_cpu(ctrl.wLength)); |
| #endif |
| |
| /* hw wants to know when we're configured (or not) */ |
| dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION |
| && ctrl.bRequestType == USB_RECIP_DEVICE); |
| if (unlikely(dev->req_config)) |
| dev->configured = (ctrl.wValue != cpu_to_le16(0)); |
| |
| /* delegate everything to the gadget driver. |
| * it may respond after this irq handler returns. |
| */ |
| spin_unlock (&dev->lock); |
| tmp = dev->driver->setup(&dev->gadget, &ctrl); |
| spin_lock (&dev->lock); |
| if (unlikely(tmp < 0)) { |
| stall: |
| #ifdef USB_TRACE |
| VDBG(dev, "req %02x.%02x protocol STALL; err %d\n", |
| ctrl.bRequestType, ctrl.bRequest, tmp); |
| #endif |
| command(regs, COMMAND_STALL, 0); |
| dev->ep[0].stopped = 1; |
| dev->ep0state = EP0_STALL; |
| } |
| |
| /* expect at least one data or status stage irq */ |
| } |
| |
| #define ACK(irqbit) { \ |
| stat &= ~irqbit; \ |
| writel(~irqbit, ®s->int_status); \ |
| handled = 1; \ |
| } |
| |
| static irqreturn_t goku_irq(int irq, void *_dev) |
| { |
| struct goku_udc *dev = _dev; |
| struct goku_udc_regs __iomem *regs = dev->regs; |
| struct goku_ep *ep; |
| u32 stat, handled = 0; |
| unsigned i, rescans = 5; |
| |
| spin_lock(&dev->lock); |
| |
| rescan: |
| stat = readl(®s->int_status) & dev->int_enable; |
| if (!stat) |
| goto done; |
| dev->irqs++; |
| |
| /* device-wide irqs */ |
| if (unlikely(stat & INT_DEVWIDE)) { |
| if (stat & INT_SYSERROR) { |
| ERROR(dev, "system error\n"); |
| stop_activity(dev, dev->driver); |
| stat = 0; |
| handled = 1; |
| // FIXME have a neater way to prevent re-enumeration |
| dev->driver = NULL; |
| goto done; |
| } |
| if (stat & INT_PWRDETECT) { |
| writel(~stat, ®s->int_status); |
| if (readl(&dev->regs->power_detect) & PW_DETECT) { |
| VDBG(dev, "connect\n"); |
| ep0_start(dev); |
| } else { |
| DBG(dev, "disconnect\n"); |
| if (dev->gadget.speed == USB_SPEED_FULL) |
| stop_activity(dev, dev->driver); |
| dev->ep0state = EP0_DISCONNECT; |
| dev->int_enable = INT_DEVWIDE; |
| writel(dev->int_enable, &dev->regs->int_enable); |
| } |
| stat = 0; |
| handled = 1; |
| goto done; |
| } |
| if (stat & INT_SUSPEND) { |
| ACK(INT_SUSPEND); |
| if (readl(®s->ep_status[0]) & EPxSTATUS_SUSPEND) { |
| switch (dev->ep0state) { |
| case EP0_DISCONNECT: |
| case EP0_SUSPEND: |
| goto pm_next; |
| default: |
| break; |
| } |
| DBG(dev, "USB suspend\n"); |
| dev->ep0state = EP0_SUSPEND; |
| if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| && dev->driver |
| && dev->driver->suspend) { |
| spin_unlock(&dev->lock); |
| dev->driver->suspend(&dev->gadget); |
| spin_lock(&dev->lock); |
| } |
| } else { |
| if (dev->ep0state != EP0_SUSPEND) { |
| DBG(dev, "bogus USB resume %d\n", |
| dev->ep0state); |
| goto pm_next; |
| } |
| DBG(dev, "USB resume\n"); |
| dev->ep0state = EP0_IDLE; |
| if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| && dev->driver |
| && dev->driver->resume) { |
| spin_unlock(&dev->lock); |
| dev->driver->resume(&dev->gadget); |
| spin_lock(&dev->lock); |
| } |
| } |
| } |
| pm_next: |
| if (stat & INT_USBRESET) { /* hub reset done */ |
| ACK(INT_USBRESET); |
| INFO(dev, "USB reset done, gadget %s\n", |
| dev->driver->driver.name); |
| } |
| // and INT_ERR on some endpoint's crc/bitstuff/... problem |
| } |
| |
| /* progress ep0 setup, data, or status stages. |
| * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs |
| */ |
| if (stat & INT_SETUP) { |
| ACK(INT_SETUP); |
| dev->ep[0].irqs++; |
| ep0_setup(dev); |
| } |
| if (stat & INT_STATUSNAK) { |
| ACK(INT_STATUSNAK|INT_ENDPOINT0); |
| if (dev->ep0state == EP0_IN) { |
| ep = &dev->ep[0]; |
| ep->irqs++; |
| nuke(ep, 0); |
| writel(~(1<<0), ®s->EOP); |
| dev->ep0state = EP0_STATUS; |
| } |
| } |
| if (stat & INT_ENDPOINT0) { |
| ACK(INT_ENDPOINT0); |
| ep = &dev->ep[0]; |
| ep->irqs++; |
| pio_advance(ep); |
| } |
| |
| /* dma completion */ |
| if (stat & INT_MSTRDEND) { /* IN */ |
| ACK(INT_MSTRDEND); |
| ep = &dev->ep[UDC_MSTRD_ENDPOINT]; |
| ep->irqs++; |
| dma_advance(dev, ep); |
| } |
| if (stat & INT_MSTWREND) { /* OUT */ |
| ACK(INT_MSTWREND); |
| ep = &dev->ep[UDC_MSTWR_ENDPOINT]; |
| ep->irqs++; |
| dma_advance(dev, ep); |
| } |
| if (stat & INT_MSTWRTMOUT) { /* OUT */ |
| ACK(INT_MSTWRTMOUT); |
| ep = &dev->ep[UDC_MSTWR_ENDPOINT]; |
| ep->irqs++; |
| ERROR(dev, "%s write timeout ?\n", ep->ep.name); |
| // reset dma? then dma_advance() |
| } |
| |
| /* pio */ |
| for (i = 1; i < 4; i++) { |
| u32 tmp = INT_EPxDATASET(i); |
| |
| if (!(stat & tmp)) |
| continue; |
| ep = &dev->ep[i]; |
| pio_advance(ep); |
| if (list_empty (&ep->queue)) |
| pio_irq_disable(dev, regs, i); |
| stat &= ~tmp; |
| handled = 1; |
| ep->irqs++; |
| } |
| |
| if (rescans--) |
| goto rescan; |
| |
| done: |
| (void)readl(®s->int_enable); |
| spin_unlock(&dev->lock); |
| if (stat) |
| DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat, |
| readl(®s->int_status), dev->int_enable); |
| return IRQ_RETVAL(handled); |
| } |
| |
| #undef ACK |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void gadget_release(struct device *_dev) |
| { |
| struct goku_udc *dev = dev_get_drvdata(_dev); |
| |
| kfree(dev); |
| } |
| |
| /* tear down the binding between this driver and the pci device */ |
| |
| static void goku_remove(struct pci_dev *pdev) |
| { |
| struct goku_udc *dev = pci_get_drvdata(pdev); |
| |
| DBG(dev, "%s\n", __func__); |
| |
| usb_del_gadget_udc(&dev->gadget); |
| |
| BUG_ON(dev->driver); |
| |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| remove_proc_entry(proc_node_name, NULL); |
| #endif |
| if (dev->regs) |
| udc_reset(dev); |
| if (dev->got_irq) |
| free_irq(pdev->irq, dev); |
| if (dev->regs) |
| iounmap(dev->regs); |
| if (dev->got_region) |
| release_mem_region(pci_resource_start (pdev, 0), |
| pci_resource_len (pdev, 0)); |
| if (dev->enabled) |
| pci_disable_device(pdev); |
| if (dev->registered) |
| device_unregister(&dev->gadget.dev); |
| |
| pci_set_drvdata(pdev, NULL); |
| dev->regs = NULL; |
| the_controller = NULL; |
| |
| INFO(dev, "unbind\n"); |
| } |
| |
| /* wrap this driver around the specified pci device, but |
| * don't respond over USB until a gadget driver binds to us. |
| */ |
| |
| static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct goku_udc *dev = NULL; |
| unsigned long resource, len; |
| void __iomem *base = NULL; |
| int retval; |
| |
| /* if you want to support more than one controller in a system, |
| * usb_gadget_driver_{register,unregister}() must change. |
| */ |
| if (the_controller) { |
| pr_warning("ignoring %s\n", pci_name(pdev)); |
| return -EBUSY; |
| } |
| if (!pdev->irq) { |
| printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev)); |
| retval = -ENODEV; |
| goto err; |
| } |
| |
| /* alloc, and start init */ |
| dev = kzalloc (sizeof *dev, GFP_KERNEL); |
| if (dev == NULL){ |
| pr_debug("enomem %s\n", pci_name(pdev)); |
| retval = -ENOMEM; |
| goto err; |
| } |
| |
| spin_lock_init(&dev->lock); |
| dev->pdev = pdev; |
| dev->gadget.ops = &goku_ops; |
| dev->gadget.max_speed = USB_SPEED_FULL; |
| |
| /* the "gadget" abstracts/virtualizes the controller */ |
| dev_set_name(&dev->gadget.dev, "gadget"); |
| dev->gadget.dev.parent = &pdev->dev; |
| dev->gadget.dev.dma_mask = pdev->dev.dma_mask; |
| dev->gadget.dev.release = gadget_release; |
| dev->gadget.name = driver_name; |
| |
| /* now all the pci goodies ... */ |
| retval = pci_enable_device(pdev); |
| if (retval < 0) { |
| DBG(dev, "can't enable, %d\n", retval); |
| goto err; |
| } |
| dev->enabled = 1; |
| |
| resource = pci_resource_start(pdev, 0); |
| len = pci_resource_len(pdev, 0); |
| if (!request_mem_region(resource, len, driver_name)) { |
| DBG(dev, "controller already in use\n"); |
| retval = -EBUSY; |
| goto err; |
| } |
| dev->got_region = 1; |
| |
| base = ioremap_nocache(resource, len); |
| if (base == NULL) { |
| DBG(dev, "can't map memory\n"); |
| retval = -EFAULT; |
| goto err; |
| } |
| dev->regs = (struct goku_udc_regs __iomem *) base; |
| |
| pci_set_drvdata(pdev, dev); |
| INFO(dev, "%s\n", driver_desc); |
| INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr()); |
| INFO(dev, "irq %d, pci mem %p\n", pdev->irq, base); |
| |
| /* init to known state, then setup irqs */ |
| udc_reset(dev); |
| udc_reinit (dev); |
| if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/, |
| driver_name, dev) != 0) { |
| DBG(dev, "request interrupt %d failed\n", pdev->irq); |
| retval = -EBUSY; |
| goto err; |
| } |
| dev->got_irq = 1; |
| if (use_dma) |
| pci_set_master(pdev); |
| |
| |
| #ifdef CONFIG_USB_GADGET_DEBUG_FILES |
| create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev); |
| #endif |
| |
| the_controller = dev; |
| retval = device_register(&dev->gadget.dev); |
| if (retval) { |
| put_device(&dev->gadget.dev); |
| goto err; |
| } |
| dev->registered = 1; |
| retval = usb_add_gadget_udc(&pdev->dev, &dev->gadget); |
| if (retval) |
| goto err; |
| |
| return 0; |
| |
| err: |
| if (dev) |
| goku_remove (pdev); |
| return retval; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static const struct pci_device_id pci_ids[] = { { |
| .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), |
| .class_mask = ~0, |
| .vendor = 0x102f, /* Toshiba */ |
| .device = 0x0107, /* this UDC */ |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| |
| }, { /* end: all zeroes */ } |
| }; |
| MODULE_DEVICE_TABLE (pci, pci_ids); |
| |
| static struct pci_driver goku_pci_driver = { |
| .name = (char *) driver_name, |
| .id_table = pci_ids, |
| |
| .probe = goku_probe, |
| .remove = goku_remove, |
| |
| /* FIXME add power management support */ |
| }; |
| |
| static int __init init (void) |
| { |
| return pci_register_driver (&goku_pci_driver); |
| } |
| module_init (init); |
| |
| static void __exit cleanup (void) |
| { |
| pci_unregister_driver (&goku_pci_driver); |
| } |
| module_exit (cleanup); |