Documentation/power/video.txt - kernel/msm - Gitiles


 		Video issues with S3 resume
 		~~~~~~~~~~~~~~~~~~~~~~~~~~~
 		  2003-2005, Pavel Machek

 During S3 resume, hardware needs to be reinitialized. For most
 devices, this is easy, and kernel driver knows how to do
 it. Unfortunately there's one exception: video card. Those are usually
 initialized by BIOS, and kernel does not have enough information to
 boot video card. (Kernel usually does not even contain video card
 driver -- vesafb and vgacon are widely used).

 This is not problem for swsusp, because during swsusp resume, BIOS is
 run normally so video card is normally initialized. It should not be
 problem for S1 standby, because hardware should retain its state over
 that.

 There are a few types of systems where video works after S3 resume:

 (1) systems where video state is preserved over S3.

 (2) systems where it is possible to call the video BIOS during S3
   resume. Unfortunately, it is not correct to call the video BIOS at
   that point, but it happens to work on some machines. Use
   acpi_sleep=s3_bios.

 (3) systems that initialize video card into vga text mode and where
   the BIOS works well enough to be able to set video mode. Use
   acpi_sleep=s3_mode on these.

 (4) on some systems s3_bios kicks video into text mode, and
   acpi_sleep=s3_bios,s3_mode is needed.

 (5) radeon systems, where X can soft-boot your video card. You'll need
   a new enough X, and a plain text console (no vesafb or radeonfb). See
   http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
   Alternatively, you should use vbetool (6) instead.

 (6) other radeon systems, where vbetool is enough to bring system back
   to life. It needs text console to be working. Do vbetool vbestate
   save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
   vbestate restore < /tmp/delme; setfont <whatever>, and your video
   should work.

 (7) on some systems, it is possible to boot most of kernel, and then
   POSTing bios works. Ole Rohne has patch to do just that at
   http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.

 (8) on some systems, you can use the video_post utility mentioned here:
   http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
   && /usr/sbin/video_post - which will initialize the display in console mode.
   If  you are in X, you can switch to a virtual terminal and back to X using
   CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.

 Now, if you pass acpi_sleep=something, and it does not work with your
 bios, you'll get a hard crash during resume. Be careful. Also it is
 safest to do your experiments with plain old VGA console. The vesafb
 and radeonfb (etc) drivers have a tendency to crash the machine during
 resume.

 You may have a system where none of above works. At that point you
 either invent another ugly hack that works, or write proper driver for
 your video card (good luck getting docs :-(). Maybe suspending from X
 (proper X, knowing your hardware, not XF68_FBcon) might have better
 chance of working.

 Table of known working notebooks:

 Model                           hack (or "how to do it")
 ------------------------------------------------------------------------------
 Acer Aspire 1406LC		ole's late BIOS init (7), turn off DRI
 Acer TM 242FX			vbetool (6)
 Acer TM C110			video_post (8)
 Acer TM C300                    vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
 Acer TM 4052LCi		        s3_bios (2)
 Acer TM 636Lci			s3_bios,s3_mode (4)
 Acer TM 650 (Radeon M7)		vga=normal plus boot-radeon (5) gets text console back
 Acer TM 660			??? (*)
 Acer TM 800			vga=normal, X patches, see webpage (5) or vbetool (6)
 Acer TM 803			vga=normal, X patches, see webpage (5) or vbetool (6)
 Acer TM 803LCi			vga=normal, vbetool (6)
 Arima W730a			vbetool needed (6)
 Asus L2400D                     s3_mode (3)(***) (S1 also works OK)
 Asus L3350M (SiS 740)           (6)
 Asus L3800C (Radeon M7)		s3_bios (2) (S1 also works OK)
 Asus M6887Ne			vga=normal, s3_bios (2), use radeon driver instead of fglrx in x.org
 Athlon64 desktop prototype	s3_bios (2)
 Compal CL-50			??? (*)
 Compaq Armada E500 - P3-700     none (1) (S1 also works OK)
 Compaq Evo N620c		vga=normal, s3_bios (2)
 Dell 600m, ATI R250 Lf		none (1), but needs xorg-x11-6.8.1.902-1
 Dell D600, ATI RV250            vga=normal and X, or try vbestate (6)
 Dell D610			vga=normal and X (possibly vbestate (6) too, but not tested)
 Dell Inspiron 4000		??? (*)
 Dell Inspiron 500m		??? (*)
 Dell Inspiron 510m		???
 Dell Inspiron 600m		??? (*)
 Dell Inspiron 8200		??? (*)
 Dell Inspiron 8500		??? (*)
 Dell Inspiron 8600		??? (*)
 eMachines athlon64 machines	vbetool needed (6) (someone please get me model #s)
 HP NC6000			s3_bios, may not use radeonfb (2); or vbetool (6)
 HP NX7000			??? (*)
 HP Pavilion ZD7000		vbetool post needed, need open-source nv driver for X
 HP Omnibook XE3	athlon version	none (1)
 HP Omnibook XE3GC		none (1), video is S3 Savage/IX-MV
 IBM TP T20, model 2647-44G	none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work.
 IBM TP A31 / Type 2652-M5G      s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(]
 IBM TP R32 / Type 2658-MMG      none (1)
 IBM TP R40 2722B3G		??? (*)
 IBM TP R50p / Type 1832-22U     s3_bios (2)
 IBM TP R51			none (1)
 IBM TP T30	236681A		??? (*)
 IBM TP T40 / Type 2373-MU4      none (1)
 IBM TP T40p			none (1)
 IBM TP R40p			s3_bios (2)
 IBM TP T41p			s3_bios (2), switch to X after resume
 IBM TP T42			s3_bios (2)
 IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
 IBM TP X20			??? (*)
 IBM TP X30			s3_bios (2)
 IBM TP X31 / Type 2672-XXH      none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
 IBM TP X32			none (1), but backlight is on and video is trashed after long suspend
 IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)
 Medion MD4220			??? (*)
 Samsung P35			vbetool needed (6)
 Sharp PC-AR10 (ATI rage)	none (1)
 Sony Vaio PCG-C1VRX/K		s3_bios (2)
 Sony Vaio PCG-F403		??? (*)
 Sony Vaio PCG-N505SN		??? (*)
 Sony Vaio vgn-s260		X or boot-radeon can init it (5)
 Toshiba Libretto L5		none (1)
 Toshiba Satellite 4030CDT	s3_mode (3)
 Toshiba Satellite 4080XCDT      s3_mode (3)
 Toshiba Satellite 4090XCDT      ??? (*)
 Toshiba Satellite P10-554       s3_bios,s3_mode (4)(****)
 Toshiba M30                     (2) xor X with nvidia driver using internal AGP
 Uniwill 244IIO			??? (*)

 Known working desktop systems
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 Mainboard	    Graphics card                 hack (or "how to do it")
 ------------------------------------------------------------------------------
 Asus A7V8X	    nVidia RIVA TNT2 model 64	  s3_bios,s3_mode (4)


 (*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
     which options to use. If you know, please tell me.

 (***) To be tested with a newer kernel.

 (****) Not with SMP kernel, UP only.

 VBEtool details
 ~~~~~~~~~~~~~~~
 (with thanks to Carl-Daniel Hailfinger)

 First, boot into X and run the following script ONCE:
 #!/bin/bash
 statedir=/root/s3/state
 mkdir -p $statedir
 chvt 2
 sleep 1
 vbetool vbestate save >$statedir/vbe


 To suspend and resume properly, call the following script as root:
 #!/bin/bash
 statedir=/root/s3/state
 curcons=`fgconsole`
 fuser /dev/tty$curcons 2>/dev/null|xargs ps -o comm= -p|grep -q X && chvt 2
 cat /dev/vcsa >$statedir/vcsa
 sync
 echo 3 >/proc/acpi/sleep
 sync
 vbetool post
 vbetool vbestate restore <$statedir/vbe
 cat $statedir/vcsa >/dev/vcsa
 rckbd restart
 chvt $[curcons%6+1]
 chvt $curcons


 Unless you change your graphics card or other hardware configuration,
 the state once saved will be OK for every resume afterwards.
 NOTE: The "rckbd restart" command may be different for your
 distribution. Simply replace it with the command you would use to
 set the fonts on screen.

	Video issues with S3 resume
	~~~~~~~~~~~~~~~~~~~~~~~~~~~
	2003-2005, Pavel Machek

	During S3 resume, hardware needs to be reinitialized. For most
	devices, this is easy, and kernel driver knows how to do
	it. Unfortunately there's one exception: video card. Those are usually
	initialized by BIOS, and kernel does not have enough information to
	boot video card. (Kernel usually does not even contain video card
	driver -- vesafb and vgacon are widely used).

	This is not problem for swsusp, because during swsusp resume, BIOS is
	run normally so video card is normally initialized. It should not be
	problem for S1 standby, because hardware should retain its state over
	that.

	There are a few types of systems where video works after S3 resume:

	(1) systems where video state is preserved over S3.

	(2) systems where it is possible to call the video BIOS during S3
	resume. Unfortunately, it is not correct to call the video BIOS at
	that point, but it happens to work on some machines. Use
	acpi_sleep=s3_bios.

	(3) systems that initialize video card into vga text mode and where
	the BIOS works well enough to be able to set video mode. Use
	acpi_sleep=s3_mode on these.

	(4) on some systems s3_bios kicks video into text mode, and
	acpi_sleep=s3_bios,s3_mode is needed.

	(5) radeon systems, where X can soft-boot your video card. You'll need
	a new enough X, and a plain text console (no vesafb or radeonfb). See
	http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
	Alternatively, you should use vbetool (6) instead.

	(6) other radeon systems, where vbetool is enough to bring system back
	to life. It needs text console to be working. Do vbetool vbestate
	save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
	vbestate restore < /tmp/delme; setfont <whatever>, and your video
	should work.

	(7) on some systems, it is possible to boot most of kernel, and then
	POSTing bios works. Ole Rohne has patch to do just that at
	http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.

	(8) on some systems, you can use the video_post utility mentioned here:
	http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
	&& /usr/sbin/video_post - which will initialize the display in console mode.
	If you are in X, you can switch to a virtual terminal and back to X using
	CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.

	Now, if you pass acpi_sleep=something, and it does not work with your
	bios, you'll get a hard crash during resume. Be careful. Also it is
	safest to do your experiments with plain old VGA console. The vesafb
	and radeonfb (etc) drivers have a tendency to crash the machine during
	resume.

	You may have a system where none of above works. At that point you
	either invent another ugly hack that works, or write proper driver for
	your video card (good luck getting docs :-(). Maybe suspending from X
	(proper X, knowing your hardware, not XF68_FBcon) might have better
	chance of working.

	Table of known working notebooks:

	Model hack (or "how to do it")
	------------------------------------------------------------------------------
	Acer Aspire 1406LC ole's late BIOS init (7), turn off DRI
	Acer TM 242FX vbetool (6)
	Acer TM C110 video_post (8)
	Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
	Acer TM 4052LCi s3_bios (2)
	Acer TM 636Lci s3_bios,s3_mode (4)
	Acer TM 650 (Radeon M7) vga=normal plus boot-radeon (5) gets text console back
	Acer TM 660 ??? (*)
	Acer TM 800 vga=normal, X patches, see webpage (5) or vbetool (6)
	Acer TM 803 vga=normal, X patches, see webpage (5) or vbetool (6)
	Acer TM 803LCi vga=normal, vbetool (6)
	Arima W730a vbetool needed (6)
	Asus L2400D s3_mode (3)(***) (S1 also works OK)
	Asus L3350M (SiS 740) (6)
	Asus L3800C (Radeon M7) s3_bios (2) (S1 also works OK)
	Asus M6887Ne vga=normal, s3_bios (2), use radeon driver instead of fglrx in x.org
	Athlon64 desktop prototype s3_bios (2)
	Compal CL-50 ??? (*)
	Compaq Armada E500 - P3-700 none (1) (S1 also works OK)
	Compaq Evo N620c vga=normal, s3_bios (2)
	Dell 600m, ATI R250 Lf none (1), but needs xorg-x11-6.8.1.902-1
	Dell D600, ATI RV250 vga=normal and X, or try vbestate (6)
	Dell D610 vga=normal and X (possibly vbestate (6) too, but not tested)
	Dell Inspiron 4000 ??? (*)
	Dell Inspiron 500m ??? (*)
	Dell Inspiron 510m ???
	Dell Inspiron 600m ??? (*)
	Dell Inspiron 8200 ??? (*)
	Dell Inspiron 8500 ??? (*)
	Dell Inspiron 8600 ??? (*)
	eMachines athlon64 machines vbetool needed (6) (someone please get me model #s)
	HP NC6000 s3_bios, may not use radeonfb (2); or vbetool (6)
	HP NX7000 ??? (*)
	HP Pavilion ZD7000 vbetool post needed, need open-source nv driver for X
	HP Omnibook XE3 athlon version none (1)
	HP Omnibook XE3GC none (1), video is S3 Savage/IX-MV
	IBM TP T20, model 2647-44G none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work.
	IBM TP A31 / Type 2652-M5G s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(]
	IBM TP R32 / Type 2658-MMG none (1)
	IBM TP R40 2722B3G ??? (*)
	IBM TP R50p / Type 1832-22U s3_bios (2)
	IBM TP R51 none (1)
	IBM TP T30 236681A ??? (*)
	IBM TP T40 / Type 2373-MU4 none (1)
	IBM TP T40p none (1)
	IBM TP R40p s3_bios (2)
	IBM TP T41p s3_bios (2), switch to X after resume
	IBM TP T42 s3_bios (2)
	IBM ThinkPad T42p (2373-GTG) s3_bios (2)
	IBM TP X20 ??? (*)
	IBM TP X30 s3_bios (2)
	IBM TP X31 / Type 2672-XXH none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
	IBM TP X32 none (1), but backlight is on and video is trashed after long suspend
	IBM Thinkpad X40 Type 2371-7JG s3_bios,s3_mode (4)
	Medion MD4220 ??? (*)
	Samsung P35 vbetool needed (6)
	Sharp PC-AR10 (ATI rage) none (1)
	Sony Vaio PCG-C1VRX/K s3_bios (2)
	Sony Vaio PCG-F403 ??? (*)
	Sony Vaio PCG-N505SN ??? (*)
	Sony Vaio vgn-s260 X or boot-radeon can init it (5)
	Toshiba Libretto L5 none (1)
	Toshiba Satellite 4030CDT s3_mode (3)
	Toshiba Satellite 4080XCDT s3_mode (3)
	Toshiba Satellite 4090XCDT ??? (*)
	Toshiba Satellite P10-554 s3_bios,s3_mode (4)(****)
	Toshiba M30 (2) xor X with nvidia driver using internal AGP
	Uniwill 244IIO ??? (*)

	Known working desktop systems
	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

	Mainboard Graphics card hack (or "how to do it")
	------------------------------------------------------------------------------
	Asus A7V8X nVidia RIVA TNT2 model 64 s3_bios,s3_mode (4)


	(*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
	which options to use. If you know, please tell me.

	(***) To be tested with a newer kernel.

	(****) Not with SMP kernel, UP only.

	VBEtool details
	~~~~~~~~~~~~~~~
	(with thanks to Carl-Daniel Hailfinger)

	First, boot into X and run the following script ONCE:
	#!/bin/bash
	statedir=/root/s3/state
	mkdir -p $statedir
	chvt 2
	sleep 1
	vbetool vbestate save >$statedir/vbe


	To suspend and resume properly, call the following script as root:
	#!/bin/bash
	statedir=/root/s3/state
	curcons=`fgconsole`
	fuser /dev/tty$curcons 2>/dev/null\|xargs ps -o comm= -p\|grep -q X && chvt 2
	cat /dev/vcsa >$statedir/vcsa
	sync
	echo 3 >/proc/acpi/sleep
	sync
	vbetool post
	vbetool vbestate restore <$statedir/vbe
	cat $statedir/vcsa >/dev/vcsa
	rckbd restart
	chvt $[curcons%6+1]
	chvt $curcons


	Unless you change your graphics card or other hardware configuration,
	the state once saved will be OK for every resume afterwards.
	NOTE: The "rckbd restart" command may be different for your
	distribution. Simply replace it with the command you would use to
	set the fonts on screen.