Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
new file mode 100644
index 0000000..2d62603
--- /dev/null
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -0,0 +1,3 @@
+lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o
+
+lib-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
new file mode 100644
index 0000000..75ce14c
--- /dev/null
+++ b/arch/mips/sibyte/swarm/dbg_io.c
@@ -0,0 +1,76 @@
+/*
+ * kgdb debug routines for SiByte boards.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+/* -------------------- BEGINNING OF CONFIG --------------------- */
+
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/addrspace.h>
+
+/*
+ * We use the second serial port for kgdb traffic.
+ * 115200, 8, N, 1.
+ */
+
+#define BAUD_RATE 115200
+#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE)
+#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */
+#define PARITY V_DUART_PARITY_MODE_NONE /* or even */
+#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */
+
+static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */
+
+/* -------------------- END OF CONFIG --------------------- */
+extern int kgdb_port;
+
+#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void putDebugChar(unsigned char c);
+unsigned char getDebugChar(void);
+static void
+duart_init(int clk_divisor, int data, int parity, int stop)
+{
+ duart_out(R_DUART_MODE_REG_1, data | parity);
+ duart_out(R_DUART_MODE_REG_2, stop);
+ duart_out(R_DUART_CLK_SEL, clk_divisor);
+
+ duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */
+}
+
+void
+putDebugChar(unsigned char c)
+{
+ if (!duart_initialized) {
+ duart_initialized = 1;
+ duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
+ }
+ while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
+ duart_out(R_DUART_TX_HOLD, c);
+}
+
+unsigned char
+getDebugChar(void)
+{
+ if (!duart_initialized) {
+ duart_initialized = 1;
+ duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
+ }
+ while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
+ return duart_in(R_DUART_RX_HOLD);
+}
+
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
new file mode 100644
index 0000000..0e633ee
--- /dev/null
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/bcd.h>
+#include <linux/types.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+
+/* M41T81 definitions */
+
+/*
+ * Register bits
+ */
+
+#define M41T81REG_SC_ST 0x80 /* stop bit */
+#define M41T81REG_HR_CB 0x40 /* century bit */
+#define M41T81REG_HR_CEB 0x80 /* century enable bit */
+#define M41T81REG_CTL_S 0x20 /* sign bit */
+#define M41T81REG_CTL_FT 0x40 /* frequency test bit */
+#define M41T81REG_CTL_OUT 0x80 /* output level */
+#define M41T81REG_WD_RB0 0x01 /* watchdog resolution bit 0 */
+#define M41T81REG_WD_RB1 0x02 /* watchdog resolution bit 1 */
+#define M41T81REG_WD_BMB0 0x04 /* watchdog multiplier bit 0 */
+#define M41T81REG_WD_BMB1 0x08 /* watchdog multiplier bit 1 */
+#define M41T81REG_WD_BMB2 0x10 /* watchdog multiplier bit 2 */
+#define M41T81REG_WD_BMB3 0x20 /* watchdog multiplier bit 3 */
+#define M41T81REG_WD_BMB4 0x40 /* watchdog multiplier bit 4 */
+#define M41T81REG_AMO_ABE 0x20 /* alarm in "battery back-up mode" enable bit */
+#define M41T81REG_AMO_SQWE 0x40 /* square wave enable */
+#define M41T81REG_AMO_AFE 0x80 /* alarm flag enable flag */
+#define M41T81REG_ADT_RPT5 0x40 /* alarm repeat mode bit 5 */
+#define M41T81REG_ADT_RPT4 0x80 /* alarm repeat mode bit 4 */
+#define M41T81REG_AHR_RPT3 0x80 /* alarm repeat mode bit 3 */
+#define M41T81REG_AHR_HT 0x40 /* halt update bit */
+#define M41T81REG_AMN_RPT2 0x80 /* alarm repeat mode bit 2 */
+#define M41T81REG_ASC_RPT1 0x80 /* alarm repeat mode bit 1 */
+#define M41T81REG_FLG_AF 0x40 /* alarm flag (read only) */
+#define M41T81REG_FLG_WDF 0x80 /* watchdog flag (read only) */
+#define M41T81REG_SQW_RS0 0x10 /* sqw frequency bit 0 */
+#define M41T81REG_SQW_RS1 0x20 /* sqw frequency bit 1 */
+#define M41T81REG_SQW_RS2 0x40 /* sqw frequency bit 2 */
+#define M41T81REG_SQW_RS3 0x80 /* sqw frequency bit 3 */
+
+
+/*
+ * Register numbers
+ */
+
+#define M41T81REG_TSC 0x00 /* tenths/hundredths of second */
+#define M41T81REG_SC 0x01 /* seconds */
+#define M41T81REG_MN 0x02 /* minute */
+#define M41T81REG_HR 0x03 /* hour/century */
+#define M41T81REG_DY 0x04 /* day of week */
+#define M41T81REG_DT 0x05 /* date of month */
+#define M41T81REG_MO 0x06 /* month */
+#define M41T81REG_YR 0x07 /* year */
+#define M41T81REG_CTL 0x08 /* control */
+#define M41T81REG_WD 0x09 /* watchdog */
+#define M41T81REG_AMO 0x0A /* alarm: month */
+#define M41T81REG_ADT 0x0B /* alarm: date */
+#define M41T81REG_AHR 0x0C /* alarm: hour */
+#define M41T81REG_AMN 0x0D /* alarm: minute */
+#define M41T81REG_ASC 0x0E /* alarm: second */
+#define M41T81REG_FLG 0x0F /* flags */
+#define M41T81REG_SQW 0x13 /* square wave register */
+
+#define M41T81_CCR_ADDRESS 0x68
+#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+static int m41t81_read(uint8_t addr)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+ bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ }
+
+ return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int m41t81_write(uint8_t addr, int b)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD));
+ bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA));
+ bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ }
+
+ /* read the same byte again to make sure it is written */
+ bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ return 0;
+}
+
+int m41t81_set_time(unsigned long t)
+{
+ struct rtc_time tm;
+
+ to_tm(t, &tm);
+
+ /*
+ * Note the write order matters as it ensures the correctness.
+ * When we write sec, 10th sec is clear. It is reasonable to
+ * believe we should finish writing min within a second.
+ */
+
+ tm.tm_sec = BIN2BCD(tm.tm_sec);
+ m41t81_write(M41T81REG_SC, tm.tm_sec);
+
+ tm.tm_min = BIN2BCD(tm.tm_min);
+ m41t81_write(M41T81REG_MN, tm.tm_min);
+
+ tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0);
+ m41t81_write(M41T81REG_HR, tm.tm_hour);
+
+ /* tm_wday starts from 0 to 6 */
+ if (tm.tm_wday == 0) tm.tm_wday = 7;
+ tm.tm_wday = BIN2BCD(tm.tm_wday);
+ m41t81_write(M41T81REG_DY, tm.tm_wday);
+
+ tm.tm_mday = BIN2BCD(tm.tm_mday);
+ m41t81_write(M41T81REG_DT, tm.tm_mday);
+
+ /* tm_mon starts from 0, *ick* */
+ tm.tm_mon ++;
+ tm.tm_mon = BIN2BCD(tm.tm_mon);
+ m41t81_write(M41T81REG_MO, tm.tm_mon);
+
+ /* we don't do century, everything is beyond 2000 */
+ tm.tm_year %= 100;
+ tm.tm_year = BIN2BCD(tm.tm_year);
+ m41t81_write(M41T81REG_YR, tm.tm_year);
+
+ return 0;
+}
+
+unsigned long m41t81_get_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+
+ /*
+ * min is valid if two reads of sec are the same.
+ */
+ for (;;) {
+ sec = m41t81_read(M41T81REG_SC);
+ min = m41t81_read(M41T81REG_MN);
+ if (sec == m41t81_read(M41T81REG_SC)) break;
+ }
+ hour = m41t81_read(M41T81REG_HR) & 0x3f;
+ day = m41t81_read(M41T81REG_DT);
+ mon = m41t81_read(M41T81REG_MO);
+ year = m41t81_read(M41T81REG_YR);
+
+ sec = BCD2BIN(sec);
+ min = BCD2BIN(min);
+ hour = BCD2BIN(hour);
+ day = BCD2BIN(day);
+ mon = BCD2BIN(mon);
+ year = BCD2BIN(year);
+
+ year += 2000;
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+int m41t81_probe(void)
+{
+ unsigned int tmp;
+
+ /* enable chip if it is not enabled yet */
+ tmp = m41t81_read(M41T81REG_SC);
+ m41t81_write(M41T81REG_SC, tmp & 0x7f);
+
+ return (m41t81_read(M41T81REG_SC) != -1);
+}
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
new file mode 100644
index 0000000..981d21f
--- /dev/null
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/bcd.h>
+#include <linux/types.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+
+/* Xicor 1241 definitions */
+
+/*
+ * Register bits
+ */
+
+#define X1241REG_SR_BAT 0x80 /* currently on battery power */
+#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */
+#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */
+#define X1241REG_SR_RTCF 0x01 /* clock failed */
+#define X1241REG_BL_BP2 0x80 /* block protect 2 */
+#define X1241REG_BL_BP1 0x40 /* block protect 1 */
+#define X1241REG_BL_BP0 0x20 /* block protect 0 */
+#define X1241REG_BL_WD1 0x10
+#define X1241REG_BL_WD0 0x08
+#define X1241REG_HR_MIL 0x80 /* military time format */
+
+/*
+ * Register numbers
+ */
+
+#define X1241REG_BL 0x10 /* block protect bits */
+#define X1241REG_INT 0x11 /* */
+#define X1241REG_SC 0x30 /* Seconds */
+#define X1241REG_MN 0x31 /* Minutes */
+#define X1241REG_HR 0x32 /* Hours */
+#define X1241REG_DT 0x33 /* Day of month */
+#define X1241REG_MO 0x34 /* Month */
+#define X1241REG_YR 0x35 /* Year */
+#define X1241REG_DW 0x36 /* Day of Week */
+#define X1241REG_Y2K 0x37 /* Year 2K */
+#define X1241REG_SR 0x3F /* Status register */
+
+#define X1241_CCR_ADDRESS 0x6F
+
+#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+static int xicor_read(uint8_t addr)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+ bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
+ bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ }
+
+ return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int xicor_write(uint8_t addr, int b)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq(addr, SMB_CSR(R_SMB_CMD));
+ bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+ bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ } else {
+ return 0;
+ }
+}
+
+int xicor_set_time(unsigned long t)
+{
+ struct rtc_time tm;
+ int tmp;
+
+ to_tm(t, &tm);
+
+ /* unlock writes to the CCR */
+ xicor_write(X1241REG_SR, X1241REG_SR_WEL);
+ xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
+
+ /* trivial ones */
+ tm.tm_sec = BIN2BCD(tm.tm_sec);
+ xicor_write(X1241REG_SC, tm.tm_sec);
+
+ tm.tm_min = BIN2BCD(tm.tm_min);
+ xicor_write(X1241REG_MN, tm.tm_min);
+
+ tm.tm_mday = BIN2BCD(tm.tm_mday);
+ xicor_write(X1241REG_DT, tm.tm_mday);
+
+ /* tm_mon starts from 0, *ick* */
+ tm.tm_mon ++;
+ tm.tm_mon = BIN2BCD(tm.tm_mon);
+ xicor_write(X1241REG_MO, tm.tm_mon);
+
+ /* year is split */
+ tmp = tm.tm_year / 100;
+ tm.tm_year %= 100;
+ xicor_write(X1241REG_YR, tm.tm_year);
+ xicor_write(X1241REG_Y2K, tmp);
+
+ /* hour is the most tricky one */
+ tmp = xicor_read(X1241REG_HR);
+ if (tmp & X1241REG_HR_MIL) {
+ /* 24 hour format */
+ tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f);
+ } else {
+ /* 12 hour format, with 0x2 for pm */
+ tmp = tmp & ~0x3f;
+ if (tm.tm_hour >= 12) {
+ tmp |= 0x20;
+ tm.tm_hour -= 12;
+ }
+ tm.tm_hour = BIN2BCD(tm.tm_hour);
+ tmp |= tm.tm_hour;
+ }
+ xicor_write(X1241REG_HR, tmp);
+
+ xicor_write(X1241REG_SR, 0);
+
+ return 0;
+}
+
+unsigned long xicor_get_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec, y2k;
+
+ sec = xicor_read(X1241REG_SC);
+ min = xicor_read(X1241REG_MN);
+ hour = xicor_read(X1241REG_HR);
+
+ if (hour & X1241REG_HR_MIL) {
+ hour &= 0x3f;
+ } else {
+ if (hour & 0x20)
+ hour = (hour & 0xf) + 0x12;
+ }
+
+ day = xicor_read(X1241REG_DT);
+ mon = xicor_read(X1241REG_MO);
+ year = xicor_read(X1241REG_YR);
+ y2k = xicor_read(X1241REG_Y2K);
+
+ sec = BCD2BIN(sec);
+ min = BCD2BIN(min);
+ hour = BCD2BIN(hour);
+ day = BCD2BIN(day);
+ mon = BCD2BIN(mon);
+ year = BCD2BIN(year);
+ y2k = BCD2BIN(y2k);
+
+ year += (y2k * 100);
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+int xicor_probe(void)
+{
+ return (xicor_read(X1241REG_SC) != -1);
+}
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
new file mode 100644
index 0000000..457aeb7
--- /dev/null
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * Setup code for the SWARM board
+ */
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/blkdev.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/initrd.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/traps.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/board.h>
+
+extern void sb1250_setup(void);
+
+extern int xicor_probe(void);
+extern int xicor_set_time(unsigned long);
+extern unsigned long xicor_get_time(void);
+
+extern int m41t81_probe(void);
+extern int m41t81_set_time(unsigned long);
+extern unsigned long m41t81_get_time(void);
+
+const char *get_system_type(void)
+{
+ return "SiByte " SIBYTE_BOARD_NAME;
+}
+
+void __init swarm_timer_setup(struct irqaction *irq)
+{
+ /*
+ * we don't set up irqaction, because we will deliver timer
+ * interrupts through low-level (direct) meachanism.
+ */
+
+ /* We only need to setup the generic timer */
+ sb1250_time_init();
+}
+
+int swarm_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ if (!is_fixup && (regs->cp0_cause & 4)) {
+ /* Data bus error - print PA */
+#ifdef CONFIG_MIPS64
+ printk("DBE physical address: %010lx\n",
+ __read_64bit_c0_register($26, 1));
+#else
+ printk("DBE physical address: %010llx\n",
+ __read_64bit_c0_split($26, 1));
+#endif
+ }
+ return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
+}
+
+static int __init swarm_setup(void)
+{
+ sb1250_setup();
+
+ panic_timeout = 5; /* For debug. */
+
+ board_timer_setup = swarm_timer_setup;
+ board_be_handler = swarm_be_handler;
+
+ if (xicor_probe()) {
+ printk("swarm setup: Xicor 1241 RTC detected.\n");
+ rtc_get_time = xicor_get_time;
+ rtc_set_time = xicor_set_time;
+ }
+
+ if (m41t81_probe()) {
+ printk("swarm setup: M41T81 RTC detected.\n");
+ rtc_get_time = m41t81_get_time;
+ rtc_set_time = m41t81_set_time;
+ }
+
+ printk("This kernel optimized for "
+#ifdef CONFIG_SIMULATION
+ "simulation"
+#else
+ "board"
+#endif
+ " runs "
+#ifdef CONFIG_SIBYTE_CFE
+ "with"
+#else
+ "without"
+#endif
+ " CFE\n");
+
+#ifdef CONFIG_VT
+ screen_info = (struct screen_info) {
+ 0, 0, /* orig-x, orig-y */
+ 0, /* unused */
+ 52, /* orig_video_page */
+ 3, /* orig_video_mode */
+ 80, /* orig_video_cols */
+ 4626, 3, 9, /* unused, ega_bx, unused */
+ 25, /* orig_video_lines */
+ 0x22, /* orig_video_isVGA */
+ 16 /* orig_video_points */
+ };
+ /* XXXKW for CFE, get lines/cols from environment */
+#endif
+
+ return 0;
+}
+
+early_initcall(swarm_setup);
+
+#ifdef LEDS_PHYS
+
+#ifdef CONFIG_SIBYTE_CARMEL
+/* XXXKW need to detect Monterey/LittleSur/etc */
+#undef LEDS_PHYS
+#define LEDS_PHYS MLEDS_PHYS
+#endif
+
+#define setled(index, c) \
+ ((unsigned char *)(IOADDR(LEDS_PHYS)+0x20))[(3-(index))<<3] = (c)
+void setleds(char *str)
+{
+ int i;
+ for (i = 0; i < 4; i++) {
+ if (!str[i]) {
+ setled(i, ' ');
+ } else {
+ setled(i, str[i]);
+ }
+ }
+}
+#endif
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
new file mode 100644
index 0000000..c1f1a9d
--- /dev/null
+++ b/arch/mips/sibyte/swarm/time.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * Time routines for the swarm board. We pass all the hard stuff
+ * through to the sb1250 handling code. Only thing we really keep
+ * track of here is what time of day we think it is. And we don't
+ * really even do a good job of that...
+ */
+
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+static unsigned long long sec_bias = 0;
+static unsigned int usec_bias = 0;
+
+/* Xicor 1241 definitions */
+
+/*
+ * Register bits
+ */
+
+#define X1241REG_SR_BAT 0x80 /* currently on battery power */
+#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */
+#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */
+#define X1241REG_SR_RTCF 0x01 /* clock failed */
+#define X1241REG_BL_BP2 0x80 /* block protect 2 */
+#define X1241REG_BL_BP1 0x40 /* block protect 1 */
+#define X1241REG_BL_BP0 0x20 /* block protect 0 */
+#define X1241REG_BL_WD1 0x10
+#define X1241REG_BL_WD0 0x08
+#define X1241REG_HR_MIL 0x80 /* military time format */
+
+/*
+ * Register numbers
+ */
+
+#define X1241REG_BL 0x10 /* block protect bits */
+#define X1241REG_INT 0x11 /* */
+#define X1241REG_SC 0x30 /* Seconds */
+#define X1241REG_MN 0x31 /* Minutes */
+#define X1241REG_HR 0x32 /* Hours */
+#define X1241REG_DT 0x33 /* Day of month */
+#define X1241REG_MO 0x34 /* Month */
+#define X1241REG_YR 0x35 /* Year */
+#define X1241REG_DW 0x36 /* Day of Week */
+#define X1241REG_Y2K 0x37 /* Year 2K */
+#define X1241REG_SR 0x3F /* Status register */
+
+#define X1241_CCR_ADDRESS 0x6F
+
+#define SMB_CSR(reg) (IOADDR(A_SMB_REGISTER(1, reg)))
+
+static int xicor_read(uint8_t addr)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+ bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
+ bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ }
+
+ return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int xicor_write(uint8_t addr, int b)
+{
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ bus_writeq(addr, SMB_CSR(R_SMB_CMD));
+ bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+ bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+ SMB_CSR(R_SMB_START));
+
+ while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+ ;
+
+ if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+ /* Clear error bit by writing a 1 */
+ bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+ return -1;
+ } else {
+ return 0;
+ }
+}
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+int set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+
+ cmos_minutes = xicor_read(X1241REG_MN);
+ cmos_minutes = BCD2BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ /* unlock writes to the CCR */
+ xicor_write(X1241REG_SR, X1241REG_SR_WEL);
+ xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ real_seconds = BIN2BCD(real_seconds);
+ real_minutes = BIN2BCD(real_minutes);
+ xicor_write(X1241REG_SC, real_seconds);
+ xicor_write(X1241REG_MN, real_minutes);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ xicor_write(X1241REG_SR, 0);
+
+ printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds);
+
+ return retval;
+}
+
+static unsigned long __init get_swarm_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec, y2k;
+
+ sec = xicor_read(X1241REG_SC);
+ min = xicor_read(X1241REG_MN);
+ hour = xicor_read(X1241REG_HR);
+
+ if (hour & X1241REG_HR_MIL) {
+ hour &= 0x3f;
+ } else {
+ if (hour & 0x20)
+ hour = (hour & 0xf) + 0x12;
+ }
+
+ sec = BCD2BIN(sec);
+ min = BCD2BIN(min);
+ hour = BCD2BIN(hour);
+
+ day = xicor_read(X1241REG_DT);
+ mon = xicor_read(X1241REG_MO);
+ year = xicor_read(X1241REG_YR);
+ y2k = xicor_read(X1241REG_Y2K);
+
+ day = BCD2BIN(day);
+ mon = BCD2BIN(mon);
+ year = BCD2BIN(year);
+ y2k = BCD2BIN(y2k);
+
+ year += (y2k * 100);
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+/*
+ * Bring up the timer at 100 Hz.
+ */
+void __init swarm_time_init(void)
+{
+ unsigned int flags;
+ int status;
+
+ /* Set up the scd general purpose timer 0 to cpu 0 */
+ sb1250_time_init();
+
+ /* Establish communication with the Xicor 1241 RTC */
+ /* XXXKW how do I share the SMBus with the I2C subsystem? */
+
+ bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+ bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+
+ if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
+ printk("x1241: couldn't detect on SWARM SMBus 1\n");
+ } else {
+ if (status & X1241REG_SR_RTCF)
+ printk("x1241: battery failed -- time is probably wrong\n");
+ write_seqlock_irqsave(&xtime_lock, flags);
+ xtime.tv_sec = get_swarm_time();
+ xtime.tv_nsec = 0;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ }
+}