| /* |
| * arch/sh/boards/renesas/edosk7705/io.c |
| * |
| * Copyright (C) 2001 Ian da Silva, Jeremy Siegel |
| * Based largely on io_se.c. |
| * |
| * I/O routines for Hitachi EDOSK7705 board. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <asm/io.h> |
| #include <asm/edosk7705/io.h> |
| #include <asm/addrspace.h> |
| |
| #define SMC_IOADDR 0xA2000000 |
| |
| #define maybebadio(name,port) \ |
| printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \ |
| #name, (port), (__u32) __builtin_return_address(0)) |
| |
| /* Map the Ethernet addresses as if it is at 0x300 - 0x320 */ |
| unsigned long sh_edosk7705_isa_port2addr(unsigned long port) |
| { |
| if (port >= 0x300 && port < 0x320) { |
| /* SMC91C96 registers are 4 byte aligned rather than the |
| * usual 2 byte! |
| */ |
| return SMC_IOADDR + ( (port - 0x300) * 2); |
| } |
| |
| maybebadio(sh_edosk7705_isa_port2addr, port); |
| return port; |
| } |
| |
| /* Trying to read / write bytes on odd-byte boundaries to the Ethernet |
| * registers causes problems. So we bit-shift the value and read / write |
| * in 2 byte chunks. Setting the low byte to 0 does not cause problems |
| * now as odd byte writes are only made on the bit mask / interrupt |
| * register. This may not be the case in future Mar-2003 SJD |
| */ |
| unsigned char sh_edosk7705_inb(unsigned long port) |
| { |
| if (port >= 0x300 && port < 0x320 && port & 0x01) { |
| return (volatile unsigned char)(generic_inw(port -1) >> 8); |
| } |
| return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port); |
| } |
| |
| unsigned int sh_edosk7705_inl(unsigned long port) |
| { |
| return *(volatile unsigned long *)port; |
| } |
| |
| void sh_edosk7705_outb(unsigned char value, unsigned long port) |
| { |
| if (port >= 0x300 && port < 0x320 && port & 0x01) { |
| generic_outw(((unsigned short)value << 8), port -1); |
| return; |
| } |
| *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value; |
| } |
| |
| void sh_edosk7705_outl(unsigned int value, unsigned long port) |
| { |
| *(volatile unsigned long *)port = value; |
| } |
| |
| void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count) |
| { |
| unsigned char *p = addr; |
| while (count--) *p++ = sh_edosk7705_inb(port); |
| } |
| |
| void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count) |
| { |
| unsigned long *p = (unsigned long*)addr; |
| while (count--) |
| *p++ = *(volatile unsigned long *)port; |
| } |
| |
| void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count) |
| { |
| unsigned char *p = (unsigned char*)addr; |
| while (count--) sh_edosk7705_outb(*p++, port); |
| } |
| |
| void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count) |
| { |
| unsigned long *p = (unsigned long*)addr; |
| while (count--) sh_edosk7705_outl(*p++, port); |
| } |
| |