arch/arm/boot/dts/msm8610-qrd.dtsi - kernel/msm - Gitiles

 /* Copyright (c) 2013, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 /* This is a QRD reference design common file. The common device
  * tree approach would help OEM during development of their extended
  * device tree. Each new QRD OEM target can select its own include
  * files and provide board specific overrides in the top level DTS
  * file.
  *
  * For example:
  * msm8xxx-qrd.dtsi: QRD reference common node
  * msm8xxx-qrd-skuxx.dts:
  * /include/ "msm8610-qrd.dtsi"
  * / {
  *      List skuxx specific node which is different with QRD
  *      reference design.
  * };
  */

 &soc {
 	i2c@f9923000{
 		focaltech@38{
 			compatible = "focaltech,5x06";
 			reg = <0x38>;
 			interrupt-parent = <&msmgpio>;
 			interrupts = <1 0x2>;
 			vdd-supply = <&pm8110_l19>;
 			vcc_i2c-supply = <&pm8110_l14>;
 			focaltech,name = "ft6x06";
 			focaltech,family-id = <0x06>;
 			focaltech,reset-gpio = <&msmgpio 0 0x00>;
 			focaltech,irq-gpio = <&msmgpio 1 0x00>;
 			focaltech,display-coords = <0 0 480 800>;
 			focaltech,panel-coords = <0 0 480 800>;
 			focaltech,button-map= <139 102 158>;
 			focaltech,no-force-update;
 			focaltech,i2c-pull-up;
 			focaltech,group-id = <1>;
 			focaltech,hard-reset-delay-ms = <20>;
 			focaltech,soft-reset-delay-ms = <150>;
 			focaltech,num-max-touches = <2>;
 			focaltech,fw-name = "ft_8610_qrd_fw.bin";
 			focaltech,fw-delay-aa-ms = <100>;
 			focaltech,fw-delay-55-ms = <30>;
 			focaltech,fw-upgrade-id1 = <0x79>;
 			focaltech,fw-upgrade-id2 = <0x08>;
 			focaltech,fw-delay-readid-ms = <10>;
 			focaltech,fw-delay-era-flsh-ms = <2000>;
 		};
 	};

 	gen-vkeys {
 		compatible = "qcom,gen-vkeys";
 		label = "ft5x06_ts";
 		qcom,disp-maxx = <480>;
 		qcom,disp-maxy = <800>;
 		qcom,panel-maxx = <481>;
 		qcom,panel-maxy = <940>;
 		qcom,key-codes = <139 0 102 158 0 0 0>;
 		qcom,y-offset = <0>;
 	};
 	serial@f991e000 {
 		status = "ok";
 	};

 	i2c@f9925000 { /* BLSP-1 QUP-3 */
 		kionix@f {
 			compatible = "kionix,kxtj9";
 			reg = <0x0f>;
 			interrupt-parent = <&msmgpio>;
 			interrupts = <81 0x2>;
 			vdd-supply = <&pm8110_l19>;
 			vio-supply = <&pm8110_l14>;
 			kionix,min-interval = <5>;
 			kionix,init-interval = <200>;
 			kionix,axis-map-x = <1>;
 			kionix,axis-map-y = <0>;
 			kionix,axis-map-z = <2>;
 			kionix,g-range = <2>;
 			kionix,negate-x;
 			kionix,negate-y;
 			kionix,negate-z;
 			kionix,res-12bit;
 		};
 	};

 	flashlight {
 		compatible = "qcom,leds-gpio-flash";
 		status = "okay";
 		qcom,flash-en = <&msmgpio 18 0>;
 		qcom,flash-now = <&msmgpio 19 0>;
 		linux,name = "flashlight";
 		linux,default-trigger = "flashlight-trigger";
 	};

 	gpio_keys {
                 compatible = "gpio-keys";
                 input-name = "gpio-keys";

                 camera_snapshot {
                         label = "camera_snapshot";
                         gpios = <&msmgpio 73 0x1>;
                         linux,input-type = <1>;
                         linux,code = <0x2fe>;
                         gpio-key,wakeup;
                         debounce-interval = <15>;
                 };

                 camera_focus {
                         label = "camera_focus";
                         gpios = <&msmgpio 74 0x1>;
                         linux,input-type = <1>;
                         linux,code = <0x210>;
                         gpio-key,wakeup;
                         debounce-interval = <15>;
                 };

                 vol_up {
                         label = "volume_up";
                         gpios = <&msmgpio 72 0x1>;
                         linux,input-type = <1>;
                         linux,code = <115>;
                         gpio-key,wakeup;
                         debounce-interval = <15>;
 		};
 	};

     sound {
         qcom,audio-routing =
             "RX_BIAS", "MCLK",
             "INT_LDO_H", "MCLK",
             "MIC BIAS Internal1", "Handset Mic",
             "MIC BIAS Internal2", "Headset Mic",
             "AMIC1", "MIC BIAS Internal1",
             "AMIC2", "MIC BIAS Internal2";
     };
 };

 &i2c_cdc  {
 	msm8x10_wcd_codec@0d{
 		compatible = "qcom,msm8x10-wcd-i2c";
 		reg = <0x0d>;

 		interrupt-parent = <&wcd9xxx_intc>;
 		interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 			     17 18 19 20 21 22 23>;

 		cdc-vdda-cp-supply = <&pm8110_s4>;
 		qcom,cdc-vdda-cp-voltage = <1800000 2150000>;
 		qcom,cdc-vdda-cp-current = <650000>;

 		cdc-vdda-h-supply = <&pm8110_l6>;
 		qcom,cdc-vdda-h-voltage = <1800000 1800000>;
 		qcom,cdc-vdda-h-current = <25000>;

 		cdc-vdd-px-supply = <&pm8110_l6>;
 		qcom,cdc-vdd-px-voltage = <1800000 1800000>;
 		qcom,cdc-vdd-px-current = <10000>;

 		cdc-vdd-1p2v-supply = <&pm8110_l4>;
 		qcom,cdc-vdd-1p2v-voltage = <1200000 1200000>;
 		qcom,cdc-vdd-1p2v-current = <5000>;

 		cdc-vdd-mic-bias-supply = <&pm8110_l20>;
 		qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>;
 		qcom,cdc-vdd-mic-bias-current = <25000>;

 		qcom,cdc-micbias-cfilt-sel = <0x0>;
 		qcom,cdc-micbias-cfilt-mv = <1800000>;
 		qcom,cdc-mclk-clk-rate = <12288000>;

 		qcom,cdc-static-supplies = "cdc-vdda-h",
 						"cdc-vdd-px",
 						"cdc-vdd-1p2v";

 		qcom,cdc-on-demand-supplies = "cdc-vdda-cp",
 						"cdc-vdd-mic-bias";
 	};

 	msm8x10_wcd_codec@77{
 		compatible = "qcom,msm8x10-wcd-i2c";
 		reg = <0x77>;
 	};

 	msm8x10_wcd_codec@66{
 		compatible = "qcom,msm8x10-wcd-i2c";
 		reg = <0x66>;
 	};

 	msm8x10_wcd_codec@55{
 		compatible = "qcom,msm8x10-wcd-i2c";
 		reg = <0x55>;
 	};
 };

 &spmi_bus {
 	qcom,pm8110@0 {
 		qcom,leds@a100 {
 			status = "okay";
 			qcom,led_mpp_2 {
 				label = "mpp";
 				linux,name = "wled-homerow";
 				linux-default-trigger = "hr-trigger";
 				qcom,default-state = "off";
 				qcom,max-current = <40>;
 				qcom,id = <6>;
 				qcom,source-sel = <1>;
 				qcom,mode-ctrl = <0x61>;
 				qcom,mode = "manual";
 			};
 		};

 		qcom,leds@a200 {
 			status = "okay";
 			qcom,led_mpp_3 {
 				label = "mpp";
 				linux,name = "wled-backlight";
 				linux,default-trigger = "bkl-trigger";
 				qcom,default-state = "on";
 				qcom,max-current = <40>;
 				qcom,id = <6>;
 				qcom,source-sel = <8>;
 				qcom,mode-ctrl = <0x10>;
 				qcom,pwm-channel = <0>;
 				qcom,pwm-us = <27>;
 				qcom,vin-ctrl = <0x03>;
 				qcom,mode = "pwm";
 			};
 		};
 	};
 };

 &spmi_bus {
 	qcom,pm8110@1 {
 		qcom,vibrator@c000 {
 			status = "okay";
 			qcom,vib-timeout-ms = <15000>;
 			qcom,vib-vtg-level-mV = <3100>;
 		};
 	};
 };

 &sdhc_1 {
 	vdd-supply = <&pm8110_l17>;
 	qcom,vdd-voltage-level = <2900000 2900000>;
 	qcom,vdd-current-level = <200 400000>;

 	vdd-io-supply = <&pm8110_l6>;
 	qcom,vdd-io-always-on;
 	qcom,vdd-io-voltage-level = <1800000 1800000>;
 	qcom,vdd-io-current-level = <200 60000>;

 	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
 	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
 	qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
 	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */

 	qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
 	qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
 	qcom,nonremovable;

 	status = "ok";
 };

 &sdhc_2 {
 	vdd-supply = <&pm8110_l18>;
 	qcom,vdd-voltage-level = <2950000 2950000>;
 	qcom,vdd-current-level = <15000 400000>;

 	vdd-io-supply = <&pm8110_l21>;
 	qcom,vdd-io-voltage-level = <1800000 2950000>;
 	qcom,vdd-io-current-level = <200 50000>;

 	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
 	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
 	qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
 	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */

 	qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;

 	#address-cells = <0>;
 	interrupt-parent = <&sdhc_2>;
 	interrupts = <0 1 2>;
 	#interrupt-cells = <1>;
 	interrupt-map-mask = <0xffffffff>;
 	interrupt-map = <0 &intc 0 125 0
 			1 &intc 0 221 0
 			2 &msmgpio 42 0x3>;
 	interrupt-names = "hc_irq", "pwr_irq", "status_irq";
 	cd-gpios = <&msmgpio 42 0x1>;

 	status = "ok";
 };

 &pm8110_chg {
 	status = "ok";

 	qcom,chgr@1000 {
 		status = "ok";
 	};

 	qcom,buck@1100 {
 		status = "ok";
 	};

 	qcom,bat-if@1200 {
 		status = "ok";
 	};

 	qcom,usb-chgpth@1300 {
 		status = "ok";
 	};

 	qcom,chg-misc@1600 {
 		status = "ok";
 	};
 };

 &pm8110_gpios {
 	gpio@c000 { /* GPIO 1 */
 	};

 	gpio@c100 { /* GPIO 2 */
 	};

 	gpio@c200 { /* GPIO 3 */
 	};

 	gpio@c300 { /* GPIO 4 */
 	};
 };

 &pm8110_mpps {
 	mpp@a000 { /* MPP 1 */
 	};

 	mpp@a100 { /* MPP 2 */
 		status = "disabled";
 	};

 	mpp@a200 { /* MPP 3 */
 		status = "disabled";
 	};

 	mpp@a300 { /* MPP 4 */
 	};
 };

 &pm8110_vadc {
 	chan@30 {
 		label = "batt_therm";
 		qcom,scale-function = <6>;
 	};
 };

 &android_usb {
 	qcom,android-usb-cdrom;
 	qcom,android-usb-internal-ums;
 };
	/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	/* This is a QRD reference design common file. The common device
	* tree approach would help OEM during development of their extended
	* device tree. Each new QRD OEM target can select its own include
	* files and provide board specific overrides in the top level DTS
	* file.
	*
	* For example:
	* msm8xxx-qrd.dtsi: QRD reference common node
	* msm8xxx-qrd-skuxx.dts:
	* /include/ "msm8610-qrd.dtsi"
	* / {
	* List skuxx specific node which is different with QRD
	* reference design.
	* };
	*/

	&soc {
	i2c@f9923000{
	focaltech@38{
	compatible = "focaltech,5x06";
	reg = <0x38>;
	interrupt-parent = <&msmgpio>;
	interrupts = <1 0x2>;
	vdd-supply = <&pm8110_l19>;
	vcc_i2c-supply = <&pm8110_l14>;
	focaltech,name = "ft6x06";
	focaltech,family-id = <0x06>;
	focaltech,reset-gpio = <&msmgpio 0 0x00>;
	focaltech,irq-gpio = <&msmgpio 1 0x00>;
	focaltech,display-coords = <0 0 480 800>;
	focaltech,panel-coords = <0 0 480 800>;
	focaltech,button-map= <139 102 158>;
	focaltech,no-force-update;
	focaltech,i2c-pull-up;
	focaltech,group-id = <1>;
	focaltech,hard-reset-delay-ms = <20>;
	focaltech,soft-reset-delay-ms = <150>;
	focaltech,num-max-touches = <2>;
	focaltech,fw-name = "ft_8610_qrd_fw.bin";
	focaltech,fw-delay-aa-ms = <100>;
	focaltech,fw-delay-55-ms = <30>;
	focaltech,fw-upgrade-id1 = <0x79>;
	focaltech,fw-upgrade-id2 = <0x08>;
	focaltech,fw-delay-readid-ms = <10>;
	focaltech,fw-delay-era-flsh-ms = <2000>;
	};
	};

	gen-vkeys {
	compatible = "qcom,gen-vkeys";
	label = "ft5x06_ts";
	qcom,disp-maxx = <480>;
	qcom,disp-maxy = <800>;
	qcom,panel-maxx = <481>;
	qcom,panel-maxy = <940>;
	qcom,key-codes = <139 0 102 158 0 0 0>;
	qcom,y-offset = <0>;
	};
	serial@f991e000 {
	status = "ok";
	};

	i2c@f9925000 { /* BLSP-1 QUP-3 */
	kionix@f {
	compatible = "kionix,kxtj9";
	reg = <0x0f>;
	interrupt-parent = <&msmgpio>;
	interrupts = <81 0x2>;
	vdd-supply = <&pm8110_l19>;
	vio-supply = <&pm8110_l14>;
	kionix,min-interval = <5>;
	kionix,init-interval = <200>;
	kionix,axis-map-x = <1>;
	kionix,axis-map-y = <0>;
	kionix,axis-map-z = <2>;
	kionix,g-range = <2>;
	kionix,negate-x;
	kionix,negate-y;
	kionix,negate-z;
	kionix,res-12bit;
	};
	};

	flashlight {
	compatible = "qcom,leds-gpio-flash";
	status = "okay";
	qcom,flash-en = <&msmgpio 18 0>;
	qcom,flash-now = <&msmgpio 19 0>;
	linux,name = "flashlight";
	linux,default-trigger = "flashlight-trigger";
	};

	gpio_keys {
	compatible = "gpio-keys";
	input-name = "gpio-keys";

	camera_snapshot {
	label = "camera_snapshot";
	gpios = <&msmgpio 73 0x1>;
	linux,input-type = <1>;
	linux,code = <0x2fe>;
	gpio-key,wakeup;
	debounce-interval = <15>;
	};

	camera_focus {
	label = "camera_focus";
	gpios = <&msmgpio 74 0x1>;
	linux,input-type = <1>;
	linux,code = <0x210>;
	gpio-key,wakeup;
	debounce-interval = <15>;
	};

	vol_up {
	label = "volume_up";
	gpios = <&msmgpio 72 0x1>;
	linux,input-type = <1>;
	linux,code = <115>;
	gpio-key,wakeup;
	debounce-interval = <15>;
	};
	};

	sound {
	qcom,audio-routing =
	"RX_BIAS", "MCLK",
	"INT_LDO_H", "MCLK",
	"MIC BIAS Internal1", "Handset Mic",
	"MIC BIAS Internal2", "Headset Mic",
	"AMIC1", "MIC BIAS Internal1",
	"AMIC2", "MIC BIAS Internal2";
	};
	};

	&i2c_cdc {
	msm8x10_wcd_codec@0d{
	compatible = "qcom,msm8x10-wcd-i2c";
	reg = <0x0d>;

	interrupt-parent = <&wcd9xxx_intc>;
	interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
	17 18 19 20 21 22 23>;

	cdc-vdda-cp-supply = <&pm8110_s4>;
	qcom,cdc-vdda-cp-voltage = <1800000 2150000>;
	qcom,cdc-vdda-cp-current = <650000>;

	cdc-vdda-h-supply = <&pm8110_l6>;
	qcom,cdc-vdda-h-voltage = <1800000 1800000>;
	qcom,cdc-vdda-h-current = <25000>;

	cdc-vdd-px-supply = <&pm8110_l6>;
	qcom,cdc-vdd-px-voltage = <1800000 1800000>;
	qcom,cdc-vdd-px-current = <10000>;

	cdc-vdd-1p2v-supply = <&pm8110_l4>;
	qcom,cdc-vdd-1p2v-voltage = <1200000 1200000>;
	qcom,cdc-vdd-1p2v-current = <5000>;

	cdc-vdd-mic-bias-supply = <&pm8110_l20>;
	qcom,cdc-vdd-mic-bias-voltage = <3075000 3075000>;
	qcom,cdc-vdd-mic-bias-current = <25000>;

	qcom,cdc-micbias-cfilt-sel = <0x0>;
	qcom,cdc-micbias-cfilt-mv = <1800000>;
	qcom,cdc-mclk-clk-rate = <12288000>;

	qcom,cdc-static-supplies = "cdc-vdda-h",
	"cdc-vdd-px",
	"cdc-vdd-1p2v";

	qcom,cdc-on-demand-supplies = "cdc-vdda-cp",
	"cdc-vdd-mic-bias";
	};

	msm8x10_wcd_codec@77{
	compatible = "qcom,msm8x10-wcd-i2c";
	reg = <0x77>;
	};

	msm8x10_wcd_codec@66{
	compatible = "qcom,msm8x10-wcd-i2c";
	reg = <0x66>;
	};

	msm8x10_wcd_codec@55{
	compatible = "qcom,msm8x10-wcd-i2c";
	reg = <0x55>;
	};
	};

	&spmi_bus {
	qcom,pm8110@0 {
	qcom,leds@a100 {
	status = "okay";
	qcom,led_mpp_2 {
	label = "mpp";
	linux,name = "wled-homerow";
	linux-default-trigger = "hr-trigger";
	qcom,default-state = "off";
	qcom,max-current = <40>;
	qcom,id = <6>;
	qcom,source-sel = <1>;
	qcom,mode-ctrl = <0x61>;
	qcom,mode = "manual";
	};
	};

	qcom,leds@a200 {
	status = "okay";
	qcom,led_mpp_3 {
	label = "mpp";
	linux,name = "wled-backlight";
	linux,default-trigger = "bkl-trigger";
	qcom,default-state = "on";
	qcom,max-current = <40>;
	qcom,id = <6>;
	qcom,source-sel = <8>;
	qcom,mode-ctrl = <0x10>;
	qcom,pwm-channel = <0>;
	qcom,pwm-us = <27>;
	qcom,vin-ctrl = <0x03>;
	qcom,mode = "pwm";
	};
	};
	};
	};

	&spmi_bus {
	qcom,pm8110@1 {
	qcom,vibrator@c000 {
	status = "okay";
	qcom,vib-timeout-ms = <15000>;
	qcom,vib-vtg-level-mV = <3100>;
	};
	};
	};

	&sdhc_1 {
	vdd-supply = <&pm8110_l17>;
	qcom,vdd-voltage-level = <2900000 2900000>;
	qcom,vdd-current-level = <200 400000>;

	vdd-io-supply = <&pm8110_l6>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <200 60000>;

	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */

	qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
	qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
	qcom,nonremovable;

	status = "ok";
	};

	&sdhc_2 {
	vdd-supply = <&pm8110_l18>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <15000 400000>;

	vdd-io-supply = <&pm8110_l21>;
	qcom,vdd-io-voltage-level = <1800000 2950000>;
	qcom,vdd-io-current-level = <200 50000>;

	qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
	qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
	qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */

	qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;

	#address-cells = <0>;
	interrupt-parent = <&sdhc_2>;
	interrupts = <0 1 2>;
	#interrupt-cells = <1>;
	interrupt-map-mask = <0xffffffff>;
	interrupt-map = <0 &intc 0 125 0
	1 &intc 0 221 0
	2 &msmgpio 42 0x3>;
	interrupt-names = "hc_irq", "pwr_irq", "status_irq";
	cd-gpios = <&msmgpio 42 0x1>;

	status = "ok";
	};

	&pm8110_chg {
	status = "ok";

	qcom,chgr@1000 {
	status = "ok";
	};

	qcom,buck@1100 {
	status = "ok";
	};

	qcom,bat-if@1200 {
	status = "ok";
	};

	qcom,usb-chgpth@1300 {
	status = "ok";
	};

	qcom,chg-misc@1600 {
	status = "ok";
	};
	};

	&pm8110_gpios {
	gpio@c000 { /* GPIO 1 */
	};

	gpio@c100 { /* GPIO 2 */
	};

	gpio@c200 { /* GPIO 3 */
	};

	gpio@c300 { /* GPIO 4 */
	};
	};

	&pm8110_mpps {
	mpp@a000 { /* MPP 1 */
	};

	mpp@a100 { /* MPP 2 */
	status = "disabled";
	};

	mpp@a200 { /* MPP 3 */
	status = "disabled";
	};

	mpp@a300 { /* MPP 4 */
	};
	};

	&pm8110_vadc {
	chan@30 {
	label = "batt_therm";
	qcom,scale-function = <6>;
	};
	};

	&android_usb {
	qcom,android-usb-cdrom;
	qcom,android-usb-internal-ums;
	};