| /* Copyright (C) 2006, Red Hat, Inc. */ |
| |
| #include <linux/types.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ieee80211.h> |
| #include <linux/if_arp.h> |
| #include <net/lib80211.h> |
| |
| #include "assoc.h" |
| #include "decl.h" |
| #include "host.h" |
| #include "scan.h" |
| #include "cmd.h" |
| |
| static const u8 bssid_any[ETH_ALEN] __attribute__ ((aligned (2))) = |
| { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; |
| static const u8 bssid_off[ETH_ALEN] __attribute__ ((aligned (2))) = |
| { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; |
| |
| /* The firmware needs the following bits masked out of the beacon-derived |
| * capability field when associating/joining to a BSS: |
| * 9 (QoS), 11 (APSD), 12 (unused), 14 (unused), 15 (unused) |
| */ |
| #define CAPINFO_MASK (~(0xda00)) |
| |
| |
| /** |
| * @brief This function finds common rates between rates and card rates. |
| * |
| * It will fill common rates in rates as output if found. |
| * |
| * NOTE: Setting the MSB of the basic rates need to be taken |
| * care, either before or after calling this function |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param rates the buffer which keeps input and output |
| * @param rates_size the size of rate1 buffer; new size of buffer on return |
| * |
| * @return 0 on success, or -1 on error |
| */ |
| static int get_common_rates(struct lbs_private *priv, |
| u8 *rates, |
| u16 *rates_size) |
| { |
| u8 *card_rates = lbs_bg_rates; |
| size_t num_card_rates = sizeof(lbs_bg_rates); |
| int ret = 0, i, j; |
| u8 tmp[30]; |
| size_t tmp_size = 0; |
| |
| /* For each rate in card_rates that exists in rate1, copy to tmp */ |
| for (i = 0; card_rates[i] && (i < num_card_rates); i++) { |
| for (j = 0; rates[j] && (j < *rates_size); j++) { |
| if (rates[j] == card_rates[i]) |
| tmp[tmp_size++] = card_rates[i]; |
| } |
| } |
| |
| lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size); |
| lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates); |
| lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size); |
| lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate); |
| |
| if (!priv->enablehwauto) { |
| for (i = 0; i < tmp_size; i++) { |
| if (tmp[i] == priv->cur_rate) |
| goto done; |
| } |
| lbs_pr_alert("Previously set fixed data rate %#x isn't " |
| "compatible with the network.\n", priv->cur_rate); |
| ret = -1; |
| goto done; |
| } |
| ret = 0; |
| |
| done: |
| memset(rates, 0, *rates_size); |
| *rates_size = min_t(int, tmp_size, *rates_size); |
| memcpy(rates, tmp, *rates_size); |
| return ret; |
| } |
| |
| |
| /** |
| * @brief Sets the MSB on basic rates as the firmware requires |
| * |
| * Scan through an array and set the MSB for basic data rates. |
| * |
| * @param rates buffer of data rates |
| * @param len size of buffer |
| */ |
| static void lbs_set_basic_rate_flags(u8 *rates, size_t len) |
| { |
| int i; |
| |
| for (i = 0; i < len; i++) { |
| if (rates[i] == 0x02 || rates[i] == 0x04 || |
| rates[i] == 0x0b || rates[i] == 0x16) |
| rates[i] |= 0x80; |
| } |
| } |
| |
| |
| static u8 iw_auth_to_ieee_auth(u8 auth) |
| { |
| if (auth == IW_AUTH_ALG_OPEN_SYSTEM) |
| return 0x00; |
| else if (auth == IW_AUTH_ALG_SHARED_KEY) |
| return 0x01; |
| else if (auth == IW_AUTH_ALG_LEAP) |
| return 0x80; |
| |
| lbs_deb_join("%s: invalid auth alg 0x%X\n", __func__, auth); |
| return 0; |
| } |
| |
| /** |
| * @brief This function prepares the authenticate command. AUTHENTICATE only |
| * sets the authentication suite for future associations, as the firmware |
| * handles authentication internally during the ASSOCIATE command. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param bssid The peer BSSID with which to authenticate |
| * @param auth The authentication mode to use (from wireless.h) |
| * |
| * @return 0 or -1 |
| */ |
| static int lbs_set_authentication(struct lbs_private *priv, u8 bssid[6], u8 auth) |
| { |
| struct cmd_ds_802_11_authenticate cmd; |
| int ret = -1; |
| DECLARE_MAC_BUF(mac); |
| |
| lbs_deb_enter(LBS_DEB_JOIN); |
| |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| memcpy(cmd.bssid, bssid, ETH_ALEN); |
| |
| cmd.authtype = iw_auth_to_ieee_auth(auth); |
| |
| lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n", |
| print_mac(mac, bssid), cmd.authtype); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_AUTHENTICATE, &cmd); |
| |
| lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int lbs_assoc_post(struct lbs_private *priv, |
| struct cmd_ds_802_11_associate_response *resp) |
| { |
| int ret = 0; |
| union iwreq_data wrqu; |
| struct bss_descriptor *bss; |
| u16 status_code; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| if (!priv->in_progress_assoc_req) { |
| lbs_deb_assoc("ASSOC_RESP: no in-progress assoc request\n"); |
| ret = -1; |
| goto done; |
| } |
| bss = &priv->in_progress_assoc_req->bss; |
| |
| /* |
| * Older FW versions map the IEEE 802.11 Status Code in the association |
| * response to the following values returned in resp->statuscode: |
| * |
| * IEEE Status Code Marvell Status Code |
| * 0 -> 0x0000 ASSOC_RESULT_SUCCESS |
| * 13 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| * 14 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| * 15 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| * 16 -> 0x0004 ASSOC_RESULT_AUTH_REFUSED |
| * others -> 0x0003 ASSOC_RESULT_REFUSED |
| * |
| * Other response codes: |
| * 0x0001 -> ASSOC_RESULT_INVALID_PARAMETERS (unused) |
| * 0x0002 -> ASSOC_RESULT_TIMEOUT (internal timer expired waiting for |
| * association response from the AP) |
| */ |
| |
| status_code = le16_to_cpu(resp->statuscode); |
| if (priv->fwrelease < 0x09000000) { |
| switch (status_code) { |
| case 0x00: |
| break; |
| case 0x01: |
| lbs_deb_assoc("ASSOC_RESP: invalid parameters\n"); |
| break; |
| case 0x02: |
| lbs_deb_assoc("ASSOC_RESP: internal timer " |
| "expired while waiting for the AP\n"); |
| break; |
| case 0x03: |
| lbs_deb_assoc("ASSOC_RESP: association " |
| "refused by AP\n"); |
| break; |
| case 0x04: |
| lbs_deb_assoc("ASSOC_RESP: authentication " |
| "refused by AP\n"); |
| break; |
| default: |
| lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x " |
| " unknown\n", status_code); |
| break; |
| } |
| } else { |
| /* v9+ returns the AP's association response */ |
| lbs_deb_assoc("ASSOC_RESP: failure reason 0x%02x\n", status_code); |
| } |
| |
| if (status_code) { |
| lbs_mac_event_disconnected(priv); |
| ret = -1; |
| goto done; |
| } |
| |
| lbs_deb_hex(LBS_DEB_ASSOC, "ASSOC_RESP", |
| (void *) (resp + sizeof (resp->hdr)), |
| le16_to_cpu(resp->hdr.size) - sizeof (resp->hdr)); |
| |
| /* Send a Media Connected event, according to the Spec */ |
| priv->connect_status = LBS_CONNECTED; |
| |
| /* Update current SSID and BSSID */ |
| memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE); |
| priv->curbssparams.ssid_len = bss->ssid_len; |
| memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN); |
| |
| priv->SNR[TYPE_RXPD][TYPE_AVG] = 0; |
| priv->NF[TYPE_RXPD][TYPE_AVG] = 0; |
| |
| memset(priv->rawSNR, 0x00, sizeof(priv->rawSNR)); |
| memset(priv->rawNF, 0x00, sizeof(priv->rawNF)); |
| priv->nextSNRNF = 0; |
| priv->numSNRNF = 0; |
| |
| netif_carrier_on(priv->dev); |
| if (!priv->tx_pending_len) |
| netif_wake_queue(priv->dev); |
| |
| memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief This function prepares an association-class command. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param assoc_req The association request describing the BSS to associate |
| * or reassociate with |
| * @param command The actual command, either CMD_802_11_ASSOCIATE or |
| * CMD_802_11_REASSOCIATE |
| * |
| * @return 0 or -1 |
| */ |
| static int lbs_associate(struct lbs_private *priv, |
| struct assoc_request *assoc_req, |
| u16 command) |
| { |
| struct cmd_ds_802_11_associate cmd; |
| int ret = 0; |
| struct bss_descriptor *bss = &assoc_req->bss; |
| u8 *pos = &(cmd.iebuf[0]); |
| u16 tmpcap, tmplen, tmpauth; |
| struct mrvl_ie_ssid_param_set *ssid; |
| struct mrvl_ie_ds_param_set *ds; |
| struct mrvl_ie_cf_param_set *cf; |
| struct mrvl_ie_rates_param_set *rates; |
| struct mrvl_ie_rsn_param_set *rsn; |
| struct mrvl_ie_auth_type *auth; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| BUG_ON((command != CMD_802_11_ASSOCIATE) && |
| (command != CMD_802_11_REASSOCIATE)); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.command = cpu_to_le16(command); |
| |
| /* Fill in static fields */ |
| memcpy(cmd.bssid, bss->bssid, ETH_ALEN); |
| cmd.listeninterval = cpu_to_le16(MRVDRV_DEFAULT_LISTEN_INTERVAL); |
| |
| /* Capability info */ |
| tmpcap = (bss->capability & CAPINFO_MASK); |
| if (bss->mode == IW_MODE_INFRA) |
| tmpcap |= WLAN_CAPABILITY_ESS; |
| cmd.capability = cpu_to_le16(tmpcap); |
| lbs_deb_assoc("ASSOC_CMD: capability 0x%04x\n", tmpcap); |
| |
| /* SSID */ |
| ssid = (struct mrvl_ie_ssid_param_set *) pos; |
| ssid->header.type = cpu_to_le16(TLV_TYPE_SSID); |
| tmplen = bss->ssid_len; |
| ssid->header.len = cpu_to_le16(tmplen); |
| memcpy(ssid->ssid, bss->ssid, tmplen); |
| pos += sizeof(ssid->header) + tmplen; |
| |
| ds = (struct mrvl_ie_ds_param_set *) pos; |
| ds->header.type = cpu_to_le16(TLV_TYPE_PHY_DS); |
| ds->header.len = cpu_to_le16(1); |
| ds->channel = bss->phy.ds.channel; |
| pos += sizeof(ds->header) + 1; |
| |
| cf = (struct mrvl_ie_cf_param_set *) pos; |
| cf->header.type = cpu_to_le16(TLV_TYPE_CF); |
| tmplen = sizeof(*cf) - sizeof (cf->header); |
| cf->header.len = cpu_to_le16(tmplen); |
| /* IE payload should be zeroed, firmware fills it in for us */ |
| pos += sizeof(*cf); |
| |
| rates = (struct mrvl_ie_rates_param_set *) pos; |
| rates->header.type = cpu_to_le16(TLV_TYPE_RATES); |
| memcpy(&rates->rates, &bss->rates, MAX_RATES); |
| tmplen = MAX_RATES; |
| if (get_common_rates(priv, rates->rates, &tmplen)) { |
| ret = -1; |
| goto done; |
| } |
| pos += sizeof(rates->header) + tmplen; |
| rates->header.len = cpu_to_le16(tmplen); |
| lbs_deb_assoc("ASSOC_CMD: num rates %u\n", tmplen); |
| |
| /* Copy the infra. association rates into Current BSS state structure */ |
| memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); |
| memcpy(&priv->curbssparams.rates, &rates->rates, tmplen); |
| |
| /* Set MSB on basic rates as the firmware requires, but _after_ |
| * copying to current bss rates. |
| */ |
| lbs_set_basic_rate_flags(rates->rates, tmplen); |
| |
| /* Firmware v9+ indicate authentication suites as a TLV */ |
| if (priv->fwrelease >= 0x09000000) { |
| DECLARE_MAC_BUF(mac); |
| |
| auth = (struct mrvl_ie_auth_type *) pos; |
| auth->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); |
| auth->header.len = cpu_to_le16(2); |
| tmpauth = iw_auth_to_ieee_auth(priv->secinfo.auth_mode); |
| auth->auth = cpu_to_le16(tmpauth); |
| pos += sizeof(auth->header) + 2; |
| |
| lbs_deb_join("AUTH_CMD: BSSID %s, auth 0x%x\n", |
| print_mac(mac, bss->bssid), priv->secinfo.auth_mode); |
| } |
| |
| /* WPA/WPA2 IEs */ |
| if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { |
| rsn = (struct mrvl_ie_rsn_param_set *) pos; |
| /* WPA_IE or WPA2_IE */ |
| rsn->header.type = cpu_to_le16((u16) assoc_req->wpa_ie[0]); |
| tmplen = (u16) assoc_req->wpa_ie[1]; |
| rsn->header.len = cpu_to_le16(tmplen); |
| memcpy(rsn->rsnie, &assoc_req->wpa_ie[2], tmplen); |
| lbs_deb_hex(LBS_DEB_JOIN, "ASSOC_CMD: WPA/RSN IE", (u8 *) rsn, |
| sizeof(rsn->header) + tmplen); |
| pos += sizeof(rsn->header) + tmplen; |
| } |
| |
| cmd.hdr.size = cpu_to_le16((sizeof(cmd) - sizeof(cmd.iebuf)) + |
| (u16)(pos - (u8 *) &cmd.iebuf)); |
| |
| /* update curbssparams */ |
| priv->curbssparams.channel = bss->phy.ds.channel; |
| |
| if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { |
| ret = -1; |
| goto done; |
| } |
| |
| ret = lbs_cmd_with_response(priv, command, &cmd); |
| if (ret == 0) { |
| ret = lbs_assoc_post(priv, |
| (struct cmd_ds_802_11_associate_response *) &cmd); |
| } |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Associate to a specific BSS discovered in a scan |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param assoc_req The association request describing the BSS to associate with |
| * |
| * @return 0-success, otherwise fail |
| */ |
| static int lbs_try_associate(struct lbs_private *priv, |
| struct assoc_request *assoc_req) |
| { |
| int ret; |
| u8 preamble = RADIO_PREAMBLE_LONG; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| /* FW v9 and higher indicate authentication suites as a TLV in the |
| * association command, not as a separate authentication command. |
| */ |
| if (priv->fwrelease < 0x09000000) { |
| ret = lbs_set_authentication(priv, assoc_req->bss.bssid, |
| priv->secinfo.auth_mode); |
| if (ret) |
| goto out; |
| } |
| |
| /* Use short preamble only when both the BSS and firmware support it */ |
| if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && |
| (assoc_req->bss.capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) |
| preamble = RADIO_PREAMBLE_SHORT; |
| |
| ret = lbs_set_radio(priv, preamble, 1); |
| if (ret) |
| goto out; |
| |
| ret = lbs_associate(priv, assoc_req, CMD_802_11_ASSOCIATE); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| static int lbs_adhoc_post(struct lbs_private *priv, |
| struct cmd_ds_802_11_ad_hoc_result *resp) |
| { |
| int ret = 0; |
| u16 command = le16_to_cpu(resp->hdr.command); |
| u16 result = le16_to_cpu(resp->hdr.result); |
| union iwreq_data wrqu; |
| struct bss_descriptor *bss; |
| DECLARE_SSID_BUF(ssid); |
| |
| lbs_deb_enter(LBS_DEB_JOIN); |
| |
| if (!priv->in_progress_assoc_req) { |
| lbs_deb_join("ADHOC_RESP: no in-progress association " |
| "request\n"); |
| ret = -1; |
| goto done; |
| } |
| bss = &priv->in_progress_assoc_req->bss; |
| |
| /* |
| * Join result code 0 --> SUCCESS |
| */ |
| if (result) { |
| lbs_deb_join("ADHOC_RESP: failed (result 0x%X)\n", result); |
| if (priv->connect_status == LBS_CONNECTED) |
| lbs_mac_event_disconnected(priv); |
| ret = -1; |
| goto done; |
| } |
| |
| /* Send a Media Connected event, according to the Spec */ |
| priv->connect_status = LBS_CONNECTED; |
| |
| if (command == CMD_RET(CMD_802_11_AD_HOC_START)) { |
| /* Update the created network descriptor with the new BSSID */ |
| memcpy(bss->bssid, resp->bssid, ETH_ALEN); |
| } |
| |
| /* Set the BSSID from the joined/started descriptor */ |
| memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN); |
| |
| /* Set the new SSID to current SSID */ |
| memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE); |
| priv->curbssparams.ssid_len = bss->ssid_len; |
| |
| netif_carrier_on(priv->dev); |
| if (!priv->tx_pending_len) |
| netif_wake_queue(priv->dev); |
| |
| memset(&wrqu, 0, sizeof(wrqu)); |
| memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, ETH_ALEN); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); |
| |
| lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n", |
| print_ssid(ssid, bss->ssid, bss->ssid_len), |
| priv->curbssparams.bssid, |
| priv->curbssparams.channel); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Join an adhoc network found in a previous scan |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param assoc_req The association request describing the BSS to join |
| * |
| * @return 0 on success, error on failure |
| */ |
| static int lbs_adhoc_join(struct lbs_private *priv, |
| struct assoc_request *assoc_req) |
| { |
| struct cmd_ds_802_11_ad_hoc_join cmd; |
| struct bss_descriptor *bss = &assoc_req->bss; |
| u8 preamble = RADIO_PREAMBLE_LONG; |
| DECLARE_SSID_BUF(ssid); |
| u16 ratesize = 0; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| lbs_deb_join("current SSID '%s', ssid length %u\n", |
| print_ssid(ssid, priv->curbssparams.ssid, |
| priv->curbssparams.ssid_len), |
| priv->curbssparams.ssid_len); |
| lbs_deb_join("requested ssid '%s', ssid length %u\n", |
| print_ssid(ssid, bss->ssid, bss->ssid_len), |
| bss->ssid_len); |
| |
| /* check if the requested SSID is already joined */ |
| if (priv->curbssparams.ssid_len && |
| !lbs_ssid_cmp(priv->curbssparams.ssid, |
| priv->curbssparams.ssid_len, |
| bss->ssid, bss->ssid_len) && |
| (priv->mode == IW_MODE_ADHOC) && |
| (priv->connect_status == LBS_CONNECTED)) { |
| union iwreq_data wrqu; |
| |
| lbs_deb_join("ADHOC_J_CMD: New ad-hoc SSID is the same as " |
| "current, not attempting to re-join"); |
| |
| /* Send the re-association event though, because the association |
| * request really was successful, even if just a null-op. |
| */ |
| memset(&wrqu, 0, sizeof(wrqu)); |
| memcpy(wrqu.ap_addr.sa_data, priv->curbssparams.bssid, |
| ETH_ALEN); |
| wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
| wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL); |
| goto out; |
| } |
| |
| /* Use short preamble only when both the BSS and firmware support it */ |
| if ((priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) && |
| (bss->capability & WLAN_CAPABILITY_SHORT_PREAMBLE)) { |
| lbs_deb_join("AdhocJoin: Short preamble\n"); |
| preamble = RADIO_PREAMBLE_SHORT; |
| } |
| |
| ret = lbs_set_radio(priv, preamble, 1); |
| if (ret) |
| goto out; |
| |
| lbs_deb_join("AdhocJoin: channel = %d\n", assoc_req->channel); |
| lbs_deb_join("AdhocJoin: band = %c\n", assoc_req->band); |
| |
| priv->adhoccreate = 0; |
| priv->curbssparams.channel = bss->channel; |
| |
| /* Build the join command */ |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| |
| cmd.bss.type = CMD_BSS_TYPE_IBSS; |
| cmd.bss.beaconperiod = cpu_to_le16(bss->beaconperiod); |
| |
| memcpy(&cmd.bss.bssid, &bss->bssid, ETH_ALEN); |
| memcpy(&cmd.bss.ssid, &bss->ssid, bss->ssid_len); |
| |
| memcpy(&cmd.bss.ds, &bss->phy.ds, sizeof(struct ieee_ie_ds_param_set)); |
| |
| memcpy(&cmd.bss.ibss, &bss->ss.ibss, |
| sizeof(struct ieee_ie_ibss_param_set)); |
| |
| cmd.bss.capability = cpu_to_le16(bss->capability & CAPINFO_MASK); |
| lbs_deb_join("ADHOC_J_CMD: tmpcap=%4X CAPINFO_MASK=%4X\n", |
| bss->capability, CAPINFO_MASK); |
| |
| /* information on BSSID descriptor passed to FW */ |
| lbs_deb_join("ADHOC_J_CMD: BSSID = %pM, SSID = '%s'\n", |
| cmd.bss.bssid, cmd.bss.ssid); |
| |
| /* Only v8 and below support setting these */ |
| if (priv->fwrelease < 0x09000000) { |
| /* failtimeout */ |
| cmd.failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT); |
| /* probedelay */ |
| cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); |
| } |
| |
| /* Copy Data rates from the rates recorded in scan response */ |
| memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates)); |
| ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES); |
| memcpy(cmd.bss.rates, bss->rates, ratesize); |
| if (get_common_rates(priv, cmd.bss.rates, &ratesize)) { |
| lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n"); |
| ret = -1; |
| goto out; |
| } |
| |
| /* Copy the ad-hoc creation rates into Current BSS state structure */ |
| memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); |
| memcpy(&priv->curbssparams.rates, cmd.bss.rates, ratesize); |
| |
| /* Set MSB on basic rates as the firmware requires, but _after_ |
| * copying to current bss rates. |
| */ |
| lbs_set_basic_rate_flags(cmd.bss.rates, ratesize); |
| |
| cmd.bss.ibss.atimwindow = bss->atimwindow; |
| |
| if (assoc_req->secinfo.wep_enabled) { |
| u16 tmp = le16_to_cpu(cmd.bss.capability); |
| tmp |= WLAN_CAPABILITY_PRIVACY; |
| cmd.bss.capability = cpu_to_le16(tmp); |
| } |
| |
| if (priv->psmode == LBS802_11POWERMODEMAX_PSP) { |
| __le32 local_ps_mode = cpu_to_le32(LBS802_11POWERMODECAM); |
| |
| /* wake up first */ |
| ret = lbs_prepare_and_send_command(priv, CMD_802_11_PS_MODE, |
| CMD_ACT_SET, 0, 0, |
| &local_ps_mode); |
| if (ret) { |
| ret = -1; |
| goto out; |
| } |
| } |
| |
| if (lbs_parse_dnld_countryinfo_11d(priv, bss)) { |
| ret = -1; |
| goto out; |
| } |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd); |
| if (ret == 0) { |
| ret = lbs_adhoc_post(priv, |
| (struct cmd_ds_802_11_ad_hoc_result *)&cmd); |
| } |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Start an Adhoc Network |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param assoc_req The association request describing the BSS to start |
| * |
| * @return 0 on success, error on failure |
| */ |
| static int lbs_adhoc_start(struct lbs_private *priv, |
| struct assoc_request *assoc_req) |
| { |
| struct cmd_ds_802_11_ad_hoc_start cmd; |
| u8 preamble = RADIO_PREAMBLE_LONG; |
| size_t ratesize = 0; |
| u16 tmpcap = 0; |
| int ret = 0; |
| DECLARE_SSID_BUF(ssid); |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| if (priv->capability & WLAN_CAPABILITY_SHORT_PREAMBLE) { |
| lbs_deb_join("ADHOC_START: Will use short preamble\n"); |
| preamble = RADIO_PREAMBLE_SHORT; |
| } |
| |
| ret = lbs_set_radio(priv, preamble, 1); |
| if (ret) |
| goto out; |
| |
| /* Build the start command */ |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| |
| memcpy(cmd.ssid, assoc_req->ssid, assoc_req->ssid_len); |
| |
| lbs_deb_join("ADHOC_START: SSID '%s', ssid length %u\n", |
| print_ssid(ssid, assoc_req->ssid, assoc_req->ssid_len), |
| assoc_req->ssid_len); |
| |
| cmd.bsstype = CMD_BSS_TYPE_IBSS; |
| |
| if (priv->beacon_period == 0) |
| priv->beacon_period = MRVDRV_BEACON_INTERVAL; |
| cmd.beaconperiod = cpu_to_le16(priv->beacon_period); |
| |
| WARN_ON(!assoc_req->channel); |
| |
| /* set Physical parameter set */ |
| cmd.ds.header.id = WLAN_EID_DS_PARAMS; |
| cmd.ds.header.len = 1; |
| cmd.ds.channel = assoc_req->channel; |
| |
| /* set IBSS parameter set */ |
| cmd.ibss.header.id = WLAN_EID_IBSS_PARAMS; |
| cmd.ibss.header.len = 2; |
| cmd.ibss.atimwindow = cpu_to_le16(0); |
| |
| /* set capability info */ |
| tmpcap = WLAN_CAPABILITY_IBSS; |
| if (assoc_req->secinfo.wep_enabled || |
| assoc_req->secinfo.WPAenabled || |
| assoc_req->secinfo.WPA2enabled) { |
| lbs_deb_join("ADHOC_START: WEP/WPA enabled, privacy on\n"); |
| tmpcap |= WLAN_CAPABILITY_PRIVACY; |
| } else |
| lbs_deb_join("ADHOC_START: WEP disabled, privacy off\n"); |
| |
| cmd.capability = cpu_to_le16(tmpcap); |
| |
| /* Only v8 and below support setting probe delay */ |
| if (priv->fwrelease < 0x09000000) |
| cmd.probedelay = cpu_to_le16(CMD_SCAN_PROBE_DELAY_TIME); |
| |
| ratesize = min(sizeof(cmd.rates), sizeof(lbs_bg_rates)); |
| memcpy(cmd.rates, lbs_bg_rates, ratesize); |
| |
| /* Copy the ad-hoc creating rates into Current BSS state structure */ |
| memset(&priv->curbssparams.rates, 0, sizeof(priv->curbssparams.rates)); |
| memcpy(&priv->curbssparams.rates, &cmd.rates, ratesize); |
| |
| /* Set MSB on basic rates as the firmware requires, but _after_ |
| * copying to current bss rates. |
| */ |
| lbs_set_basic_rate_flags(cmd.rates, ratesize); |
| |
| lbs_deb_join("ADHOC_START: rates=%02x %02x %02x %02x\n", |
| cmd.rates[0], cmd.rates[1], cmd.rates[2], cmd.rates[3]); |
| |
| if (lbs_create_dnld_countryinfo_11d(priv)) { |
| lbs_deb_join("ADHOC_START: dnld_countryinfo_11d failed\n"); |
| ret = -1; |
| goto out; |
| } |
| |
| lbs_deb_join("ADHOC_START: Starting Ad-Hoc BSS on channel %d, band %d\n", |
| assoc_req->channel, assoc_req->band); |
| |
| priv->adhoccreate = 1; |
| priv->mode = IW_MODE_ADHOC; |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_START, &cmd); |
| if (ret == 0) |
| ret = lbs_adhoc_post(priv, |
| (struct cmd_ds_802_11_ad_hoc_result *)&cmd); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| /** |
| * @brief Stop and Ad-Hoc network and exit Ad-Hoc mode |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @return 0 on success, or an error |
| */ |
| int lbs_adhoc_stop(struct lbs_private *priv) |
| { |
| struct cmd_ds_802_11_ad_hoc_stop cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_JOIN); |
| |
| memset(&cmd, 0, sizeof (cmd)); |
| cmd.hdr.size = cpu_to_le16 (sizeof (cmd)); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_STOP, &cmd); |
| |
| /* Clean up everything even if there was an error */ |
| lbs_mac_event_disconnected(priv); |
| |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| static inline int match_bss_no_security(struct lbs_802_11_security *secinfo, |
| struct bss_descriptor *match_bss) |
| { |
| if (!secinfo->wep_enabled && !secinfo->WPAenabled |
| && !secinfo->WPA2enabled |
| && match_bss->wpa_ie[0] != WLAN_EID_GENERIC |
| && match_bss->rsn_ie[0] != WLAN_EID_RSN |
| && !(match_bss->capability & WLAN_CAPABILITY_PRIVACY)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static inline int match_bss_static_wep(struct lbs_802_11_security *secinfo, |
| struct bss_descriptor *match_bss) |
| { |
| if (secinfo->wep_enabled && !secinfo->WPAenabled |
| && !secinfo->WPA2enabled |
| && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static inline int match_bss_wpa(struct lbs_802_11_security *secinfo, |
| struct bss_descriptor *match_bss) |
| { |
| if (!secinfo->wep_enabled && secinfo->WPAenabled |
| && (match_bss->wpa_ie[0] == WLAN_EID_GENERIC) |
| /* privacy bit may NOT be set in some APs like LinkSys WRT54G |
| && (match_bss->capability & WLAN_CAPABILITY_PRIVACY) */ |
| ) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static inline int match_bss_wpa2(struct lbs_802_11_security *secinfo, |
| struct bss_descriptor *match_bss) |
| { |
| if (!secinfo->wep_enabled && secinfo->WPA2enabled && |
| (match_bss->rsn_ie[0] == WLAN_EID_RSN) |
| /* privacy bit may NOT be set in some APs like LinkSys WRT54G |
| (match_bss->capability & WLAN_CAPABILITY_PRIVACY) */ |
| ) |
| return 1; |
| else |
| return 0; |
| } |
| |
| static inline int match_bss_dynamic_wep(struct lbs_802_11_security *secinfo, |
| struct bss_descriptor *match_bss) |
| { |
| if (!secinfo->wep_enabled && !secinfo->WPAenabled |
| && !secinfo->WPA2enabled |
| && (match_bss->wpa_ie[0] != WLAN_EID_GENERIC) |
| && (match_bss->rsn_ie[0] != WLAN_EID_RSN) |
| && (match_bss->capability & WLAN_CAPABILITY_PRIVACY)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /** |
| * @brief Check if a scanned network compatible with the driver settings |
| * |
| * WEP WPA WPA2 ad-hoc encrypt Network |
| * enabled enabled enabled AES mode privacy WPA WPA2 Compatible |
| * 0 0 0 0 NONE 0 0 0 yes No security |
| * 1 0 0 0 NONE 1 0 0 yes Static WEP |
| * 0 1 0 0 x 1x 1 x yes WPA |
| * 0 0 1 0 x 1x x 1 yes WPA2 |
| * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES |
| * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP |
| * |
| * |
| * @param priv A pointer to struct lbs_private |
| * @param index Index in scantable to check against current driver settings |
| * @param mode Network mode: Infrastructure or IBSS |
| * |
| * @return Index in scantable, or error code if negative |
| */ |
| static int is_network_compatible(struct lbs_private *priv, |
| struct bss_descriptor *bss, uint8_t mode) |
| { |
| int matched = 0; |
| |
| lbs_deb_enter(LBS_DEB_SCAN); |
| |
| if (bss->mode != mode) |
| goto done; |
| |
| matched = match_bss_no_security(&priv->secinfo, bss); |
| if (matched) |
| goto done; |
| matched = match_bss_static_wep(&priv->secinfo, bss); |
| if (matched) |
| goto done; |
| matched = match_bss_wpa(&priv->secinfo, bss); |
| if (matched) { |
| lbs_deb_scan("is_network_compatible() WPA: wpa_ie 0x%x " |
| "wpa2_ie 0x%x WEP %s WPA %s WPA2 %s " |
| "privacy 0x%x\n", bss->wpa_ie[0], bss->rsn_ie[0], |
| priv->secinfo.wep_enabled ? "e" : "d", |
| priv->secinfo.WPAenabled ? "e" : "d", |
| priv->secinfo.WPA2enabled ? "e" : "d", |
| (bss->capability & WLAN_CAPABILITY_PRIVACY)); |
| goto done; |
| } |
| matched = match_bss_wpa2(&priv->secinfo, bss); |
| if (matched) { |
| lbs_deb_scan("is_network_compatible() WPA2: wpa_ie 0x%x " |
| "wpa2_ie 0x%x WEP %s WPA %s WPA2 %s " |
| "privacy 0x%x\n", bss->wpa_ie[0], bss->rsn_ie[0], |
| priv->secinfo.wep_enabled ? "e" : "d", |
| priv->secinfo.WPAenabled ? "e" : "d", |
| priv->secinfo.WPA2enabled ? "e" : "d", |
| (bss->capability & WLAN_CAPABILITY_PRIVACY)); |
| goto done; |
| } |
| matched = match_bss_dynamic_wep(&priv->secinfo, bss); |
| if (matched) { |
| lbs_deb_scan("is_network_compatible() dynamic WEP: " |
| "wpa_ie 0x%x wpa2_ie 0x%x privacy 0x%x\n", |
| bss->wpa_ie[0], bss->rsn_ie[0], |
| (bss->capability & WLAN_CAPABILITY_PRIVACY)); |
| goto done; |
| } |
| |
| /* bss security settings don't match those configured on card */ |
| lbs_deb_scan("is_network_compatible() FAILED: wpa_ie 0x%x " |
| "wpa2_ie 0x%x WEP %s WPA %s WPA2 %s privacy 0x%x\n", |
| bss->wpa_ie[0], bss->rsn_ie[0], |
| priv->secinfo.wep_enabled ? "e" : "d", |
| priv->secinfo.WPAenabled ? "e" : "d", |
| priv->secinfo.WPA2enabled ? "e" : "d", |
| (bss->capability & WLAN_CAPABILITY_PRIVACY)); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_SCAN, "matched: %d", matched); |
| return matched; |
| } |
| |
| /** |
| * @brief This function finds a specific compatible BSSID in the scan list |
| * |
| * Used in association code |
| * |
| * @param priv A pointer to struct lbs_private |
| * @param bssid BSSID to find in the scan list |
| * @param mode Network mode: Infrastructure or IBSS |
| * |
| * @return index in BSSID list, or error return code (< 0) |
| */ |
| static struct bss_descriptor *lbs_find_bssid_in_list(struct lbs_private *priv, |
| uint8_t *bssid, uint8_t mode) |
| { |
| struct bss_descriptor *iter_bss; |
| struct bss_descriptor *found_bss = NULL; |
| |
| lbs_deb_enter(LBS_DEB_SCAN); |
| |
| if (!bssid) |
| goto out; |
| |
| lbs_deb_hex(LBS_DEB_SCAN, "looking for", bssid, ETH_ALEN); |
| |
| /* Look through the scan table for a compatible match. The loop will |
| * continue past a matched bssid that is not compatible in case there |
| * is an AP with multiple SSIDs assigned to the same BSSID |
| */ |
| mutex_lock(&priv->lock); |
| list_for_each_entry(iter_bss, &priv->network_list, list) { |
| if (compare_ether_addr(iter_bss->bssid, bssid)) |
| continue; /* bssid doesn't match */ |
| switch (mode) { |
| case IW_MODE_INFRA: |
| case IW_MODE_ADHOC: |
| if (!is_network_compatible(priv, iter_bss, mode)) |
| break; |
| found_bss = iter_bss; |
| break; |
| default: |
| found_bss = iter_bss; |
| break; |
| } |
| } |
| mutex_unlock(&priv->lock); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SCAN, "found_bss %p", found_bss); |
| return found_bss; |
| } |
| |
| /** |
| * @brief This function finds ssid in ssid list. |
| * |
| * Used in association code |
| * |
| * @param priv A pointer to struct lbs_private |
| * @param ssid SSID to find in the list |
| * @param bssid BSSID to qualify the SSID selection (if provided) |
| * @param mode Network mode: Infrastructure or IBSS |
| * |
| * @return index in BSSID list |
| */ |
| static struct bss_descriptor *lbs_find_ssid_in_list(struct lbs_private *priv, |
| uint8_t *ssid, uint8_t ssid_len, |
| uint8_t *bssid, uint8_t mode, |
| int channel) |
| { |
| u32 bestrssi = 0; |
| struct bss_descriptor *iter_bss = NULL; |
| struct bss_descriptor *found_bss = NULL; |
| struct bss_descriptor *tmp_oldest = NULL; |
| |
| lbs_deb_enter(LBS_DEB_SCAN); |
| |
| mutex_lock(&priv->lock); |
| |
| list_for_each_entry(iter_bss, &priv->network_list, list) { |
| if (!tmp_oldest || |
| (iter_bss->last_scanned < tmp_oldest->last_scanned)) |
| tmp_oldest = iter_bss; |
| |
| if (lbs_ssid_cmp(iter_bss->ssid, iter_bss->ssid_len, |
| ssid, ssid_len) != 0) |
| continue; /* ssid doesn't match */ |
| if (bssid && compare_ether_addr(iter_bss->bssid, bssid) != 0) |
| continue; /* bssid doesn't match */ |
| if ((channel > 0) && (iter_bss->channel != channel)) |
| continue; /* channel doesn't match */ |
| |
| switch (mode) { |
| case IW_MODE_INFRA: |
| case IW_MODE_ADHOC: |
| if (!is_network_compatible(priv, iter_bss, mode)) |
| break; |
| |
| if (bssid) { |
| /* Found requested BSSID */ |
| found_bss = iter_bss; |
| goto out; |
| } |
| |
| if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { |
| bestrssi = SCAN_RSSI(iter_bss->rssi); |
| found_bss = iter_bss; |
| } |
| break; |
| case IW_MODE_AUTO: |
| default: |
| if (SCAN_RSSI(iter_bss->rssi) > bestrssi) { |
| bestrssi = SCAN_RSSI(iter_bss->rssi); |
| found_bss = iter_bss; |
| } |
| break; |
| } |
| } |
| |
| out: |
| mutex_unlock(&priv->lock); |
| lbs_deb_leave_args(LBS_DEB_SCAN, "found_bss %p", found_bss); |
| return found_bss; |
| } |
| |
| static int assoc_helper_essid(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| struct bss_descriptor * bss; |
| int channel = -1; |
| DECLARE_SSID_BUF(ssid); |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| /* FIXME: take channel into account when picking SSIDs if a channel |
| * is set. |
| */ |
| |
| if (test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) |
| channel = assoc_req->channel; |
| |
| lbs_deb_assoc("SSID '%s' requested\n", |
| print_ssid(ssid, assoc_req->ssid, assoc_req->ssid_len)); |
| if (assoc_req->mode == IW_MODE_INFRA) { |
| lbs_send_specific_ssid_scan(priv, assoc_req->ssid, |
| assoc_req->ssid_len); |
| |
| bss = lbs_find_ssid_in_list(priv, assoc_req->ssid, |
| assoc_req->ssid_len, NULL, IW_MODE_INFRA, channel); |
| if (bss != NULL) { |
| memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor)); |
| ret = lbs_try_associate(priv, assoc_req); |
| } else { |
| lbs_deb_assoc("SSID not found; cannot associate\n"); |
| } |
| } else if (assoc_req->mode == IW_MODE_ADHOC) { |
| /* Scan for the network, do not save previous results. Stale |
| * scan data will cause us to join a non-existant adhoc network |
| */ |
| lbs_send_specific_ssid_scan(priv, assoc_req->ssid, |
| assoc_req->ssid_len); |
| |
| /* Search for the requested SSID in the scan table */ |
| bss = lbs_find_ssid_in_list(priv, assoc_req->ssid, |
| assoc_req->ssid_len, NULL, IW_MODE_ADHOC, channel); |
| if (bss != NULL) { |
| lbs_deb_assoc("SSID found, will join\n"); |
| memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor)); |
| lbs_adhoc_join(priv, assoc_req); |
| } else { |
| /* else send START command */ |
| lbs_deb_assoc("SSID not found, creating adhoc network\n"); |
| memcpy(&assoc_req->bss.ssid, &assoc_req->ssid, |
| IW_ESSID_MAX_SIZE); |
| assoc_req->bss.ssid_len = assoc_req->ssid_len; |
| lbs_adhoc_start(priv, assoc_req); |
| } |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int assoc_helper_bssid(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| struct bss_descriptor * bss; |
| |
| lbs_deb_enter_args(LBS_DEB_ASSOC, "BSSID %pM", assoc_req->bssid); |
| |
| /* Search for index position in list for requested MAC */ |
| bss = lbs_find_bssid_in_list(priv, assoc_req->bssid, |
| assoc_req->mode); |
| if (bss == NULL) { |
| lbs_deb_assoc("ASSOC: WAP: BSSID %pM not found, " |
| "cannot associate.\n", assoc_req->bssid); |
| goto out; |
| } |
| |
| memcpy(&assoc_req->bss, bss, sizeof(struct bss_descriptor)); |
| if (assoc_req->mode == IW_MODE_INFRA) { |
| ret = lbs_try_associate(priv, assoc_req); |
| lbs_deb_assoc("ASSOC: lbs_try_associate(bssid) returned %d\n", |
| ret); |
| } else if (assoc_req->mode == IW_MODE_ADHOC) { |
| lbs_adhoc_join(priv, assoc_req); |
| } |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int assoc_helper_associate(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0, done = 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| /* If we're given and 'any' BSSID, try associating based on SSID */ |
| |
| if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) { |
| if (compare_ether_addr(bssid_any, assoc_req->bssid) |
| && compare_ether_addr(bssid_off, assoc_req->bssid)) { |
| ret = assoc_helper_bssid(priv, assoc_req); |
| done = 1; |
| } |
| } |
| |
| if (!done && test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) { |
| ret = assoc_helper_essid(priv, assoc_req); |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int assoc_helper_mode(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| if (assoc_req->mode == priv->mode) |
| goto done; |
| |
| if (assoc_req->mode == IW_MODE_INFRA) { |
| if (priv->psstate != PS_STATE_FULL_POWER) |
| lbs_ps_wakeup(priv, CMD_OPTION_WAITFORRSP); |
| priv->psmode = LBS802_11POWERMODECAM; |
| } |
| |
| priv->mode = assoc_req->mode; |
| ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, assoc_req->mode); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| static int assoc_helper_channel(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| ret = lbs_update_channel(priv); |
| if (ret) { |
| lbs_deb_assoc("ASSOC: channel: error getting channel.\n"); |
| goto done; |
| } |
| |
| if (assoc_req->channel == priv->curbssparams.channel) |
| goto done; |
| |
| if (priv->mesh_dev) { |
| /* Change mesh channel first; 21.p21 firmware won't let |
| you change channel otherwise (even though it'll return |
| an error to this */ |
| lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_STOP, |
| assoc_req->channel); |
| } |
| |
| lbs_deb_assoc("ASSOC: channel: %d -> %d\n", |
| priv->curbssparams.channel, assoc_req->channel); |
| |
| ret = lbs_set_channel(priv, assoc_req->channel); |
| if (ret < 0) |
| lbs_deb_assoc("ASSOC: channel: error setting channel.\n"); |
| |
| /* FIXME: shouldn't need to grab the channel _again_ after setting |
| * it since the firmware is supposed to return the new channel, but |
| * whatever... */ |
| ret = lbs_update_channel(priv); |
| if (ret) { |
| lbs_deb_assoc("ASSOC: channel: error getting channel.\n"); |
| goto done; |
| } |
| |
| if (assoc_req->channel != priv->curbssparams.channel) { |
| lbs_deb_assoc("ASSOC: channel: failed to update channel to %d\n", |
| assoc_req->channel); |
| goto restore_mesh; |
| } |
| |
| if ( assoc_req->secinfo.wep_enabled |
| && (assoc_req->wep_keys[0].len |
| || assoc_req->wep_keys[1].len |
| || assoc_req->wep_keys[2].len |
| || assoc_req->wep_keys[3].len)) { |
| /* Make sure WEP keys are re-sent to firmware */ |
| set_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags); |
| } |
| |
| /* Must restart/rejoin adhoc networks after channel change */ |
| set_bit(ASSOC_FLAG_SSID, &assoc_req->flags); |
| |
| restore_mesh: |
| if (priv->mesh_dev) |
| lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START, |
| priv->curbssparams.channel); |
| |
| done: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int assoc_helper_wep_keys(struct lbs_private *priv, |
| struct assoc_request *assoc_req) |
| { |
| int i; |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| /* Set or remove WEP keys */ |
| if (assoc_req->wep_keys[0].len || assoc_req->wep_keys[1].len || |
| assoc_req->wep_keys[2].len || assoc_req->wep_keys[3].len) |
| ret = lbs_cmd_802_11_set_wep(priv, CMD_ACT_ADD, assoc_req); |
| else |
| ret = lbs_cmd_802_11_set_wep(priv, CMD_ACT_REMOVE, assoc_req); |
| |
| if (ret) |
| goto out; |
| |
| /* enable/disable the MAC's WEP packet filter */ |
| if (assoc_req->secinfo.wep_enabled) |
| priv->mac_control |= CMD_ACT_MAC_WEP_ENABLE; |
| else |
| priv->mac_control &= ~CMD_ACT_MAC_WEP_ENABLE; |
| |
| lbs_set_mac_control(priv); |
| |
| mutex_lock(&priv->lock); |
| |
| /* Copy WEP keys into priv wep key fields */ |
| for (i = 0; i < 4; i++) { |
| memcpy(&priv->wep_keys[i], &assoc_req->wep_keys[i], |
| sizeof(struct enc_key)); |
| } |
| priv->wep_tx_keyidx = assoc_req->wep_tx_keyidx; |
| |
| mutex_unlock(&priv->lock); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| static int assoc_helper_secinfo(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| uint16_t do_wpa; |
| uint16_t rsn = 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| memcpy(&priv->secinfo, &assoc_req->secinfo, |
| sizeof(struct lbs_802_11_security)); |
| |
| lbs_set_mac_control(priv); |
| |
| /* If RSN is already enabled, don't try to enable it again, since |
| * ENABLE_RSN resets internal state machines and will clobber the |
| * 4-way WPA handshake. |
| */ |
| |
| /* Get RSN enabled/disabled */ |
| ret = lbs_cmd_802_11_enable_rsn(priv, CMD_ACT_GET, &rsn); |
| if (ret) { |
| lbs_deb_assoc("Failed to get RSN status: %d\n", ret); |
| goto out; |
| } |
| |
| /* Don't re-enable RSN if it's already enabled */ |
| do_wpa = assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled; |
| if (do_wpa == rsn) |
| goto out; |
| |
| /* Set RSN enabled/disabled */ |
| ret = lbs_cmd_802_11_enable_rsn(priv, CMD_ACT_SET, &do_wpa); |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int assoc_helper_wpa_keys(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| unsigned int flags = assoc_req->flags; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| /* Work around older firmware bug where WPA unicast and multicast |
| * keys must be set independently. Seen in SDIO parts with firmware |
| * version 5.0.11p0. |
| */ |
| |
| if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) { |
| clear_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags); |
| ret = lbs_cmd_802_11_key_material(priv, CMD_ACT_SET, assoc_req); |
| assoc_req->flags = flags; |
| } |
| |
| if (ret) |
| goto out; |
| |
| if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags)) { |
| clear_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags); |
| |
| ret = lbs_cmd_802_11_key_material(priv, CMD_ACT_SET, assoc_req); |
| assoc_req->flags = flags; |
| } |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int assoc_helper_wpa_ie(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) { |
| memcpy(&priv->wpa_ie, &assoc_req->wpa_ie, assoc_req->wpa_ie_len); |
| priv->wpa_ie_len = assoc_req->wpa_ie_len; |
| } else { |
| memset(&priv->wpa_ie, 0, MAX_WPA_IE_LEN); |
| priv->wpa_ie_len = 0; |
| } |
| |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int should_deauth_infrastructure(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| int ret = 0; |
| |
| if (priv->connect_status != LBS_CONNECTED) |
| return 0; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) { |
| lbs_deb_assoc("Deauthenticating due to new SSID\n"); |
| ret = 1; |
| goto out; |
| } |
| |
| if (test_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags)) { |
| if (priv->secinfo.auth_mode != assoc_req->secinfo.auth_mode) { |
| lbs_deb_assoc("Deauthenticating due to new security\n"); |
| ret = 1; |
| goto out; |
| } |
| } |
| |
| if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) { |
| lbs_deb_assoc("Deauthenticating due to new BSSID\n"); |
| ret = 1; |
| goto out; |
| } |
| |
| if (test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) { |
| lbs_deb_assoc("Deauthenticating due to channel switch\n"); |
| ret = 1; |
| goto out; |
| } |
| |
| /* FIXME: deal with 'auto' mode somehow */ |
| if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) { |
| if (assoc_req->mode != IW_MODE_INFRA) { |
| lbs_deb_assoc("Deauthenticating due to leaving " |
| "infra mode\n"); |
| ret = 1; |
| goto out; |
| } |
| } |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| static int should_stop_adhoc(struct lbs_private *priv, |
| struct assoc_request * assoc_req) |
| { |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| if (priv->connect_status != LBS_CONNECTED) |
| return 0; |
| |
| if (lbs_ssid_cmp(priv->curbssparams.ssid, |
| priv->curbssparams.ssid_len, |
| assoc_req->ssid, assoc_req->ssid_len) != 0) |
| return 1; |
| |
| /* FIXME: deal with 'auto' mode somehow */ |
| if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) { |
| if (assoc_req->mode != IW_MODE_ADHOC) |
| return 1; |
| } |
| |
| if (test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) { |
| if (assoc_req->channel != priv->curbssparams.channel) |
| return 1; |
| } |
| |
| lbs_deb_leave(LBS_DEB_ASSOC); |
| return 0; |
| } |
| |
| |
| /** |
| * @brief This function finds the best SSID in the Scan List |
| * |
| * Search the scan table for the best SSID that also matches the current |
| * adapter network preference (infrastructure or adhoc) |
| * |
| * @param priv A pointer to struct lbs_private |
| * |
| * @return index in BSSID list |
| */ |
| static struct bss_descriptor *lbs_find_best_ssid_in_list( |
| struct lbs_private *priv, uint8_t mode) |
| { |
| uint8_t bestrssi = 0; |
| struct bss_descriptor *iter_bss; |
| struct bss_descriptor *best_bss = NULL; |
| |
| lbs_deb_enter(LBS_DEB_SCAN); |
| |
| mutex_lock(&priv->lock); |
| |
| list_for_each_entry(iter_bss, &priv->network_list, list) { |
| switch (mode) { |
| case IW_MODE_INFRA: |
| case IW_MODE_ADHOC: |
| if (!is_network_compatible(priv, iter_bss, mode)) |
| break; |
| if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) |
| break; |
| bestrssi = SCAN_RSSI(iter_bss->rssi); |
| best_bss = iter_bss; |
| break; |
| case IW_MODE_AUTO: |
| default: |
| if (SCAN_RSSI(iter_bss->rssi) <= bestrssi) |
| break; |
| bestrssi = SCAN_RSSI(iter_bss->rssi); |
| best_bss = iter_bss; |
| break; |
| } |
| } |
| |
| mutex_unlock(&priv->lock); |
| lbs_deb_leave_args(LBS_DEB_SCAN, "best_bss %p", best_bss); |
| return best_bss; |
| } |
| |
| /** |
| * @brief Find the best AP |
| * |
| * Used from association worker. |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param pSSID A pointer to AP's ssid |
| * |
| * @return 0--success, otherwise--fail |
| */ |
| static int lbs_find_best_network_ssid(struct lbs_private *priv, |
| uint8_t *out_ssid, uint8_t *out_ssid_len, uint8_t preferred_mode, |
| uint8_t *out_mode) |
| { |
| int ret = -1; |
| struct bss_descriptor *found; |
| |
| lbs_deb_enter(LBS_DEB_SCAN); |
| |
| priv->scan_ssid_len = 0; |
| lbs_scan_networks(priv, 1); |
| if (priv->surpriseremoved) |
| goto out; |
| |
| found = lbs_find_best_ssid_in_list(priv, preferred_mode); |
| if (found && (found->ssid_len > 0)) { |
| memcpy(out_ssid, &found->ssid, IW_ESSID_MAX_SIZE); |
| *out_ssid_len = found->ssid_len; |
| *out_mode = found->mode; |
| ret = 0; |
| } |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SCAN, "ret %d", ret); |
| return ret; |
| } |
| |
| |
| void lbs_association_worker(struct work_struct *work) |
| { |
| struct lbs_private *priv = container_of(work, struct lbs_private, |
| assoc_work.work); |
| struct assoc_request * assoc_req = NULL; |
| int ret = 0; |
| int find_any_ssid = 0; |
| DECLARE_SSID_BUF(ssid); |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| |
| mutex_lock(&priv->lock); |
| assoc_req = priv->pending_assoc_req; |
| priv->pending_assoc_req = NULL; |
| priv->in_progress_assoc_req = assoc_req; |
| mutex_unlock(&priv->lock); |
| |
| if (!assoc_req) |
| goto done; |
| |
| lbs_deb_assoc( |
| "Association Request:\n" |
| " flags: 0x%08lx\n" |
| " SSID: '%s'\n" |
| " chann: %d\n" |
| " band: %d\n" |
| " mode: %d\n" |
| " BSSID: %pM\n" |
| " secinfo: %s%s%s\n" |
| " auth_mode: %d\n", |
| assoc_req->flags, |
| print_ssid(ssid, assoc_req->ssid, assoc_req->ssid_len), |
| assoc_req->channel, assoc_req->band, assoc_req->mode, |
| assoc_req->bssid, |
| assoc_req->secinfo.WPAenabled ? " WPA" : "", |
| assoc_req->secinfo.WPA2enabled ? " WPA2" : "", |
| assoc_req->secinfo.wep_enabled ? " WEP" : "", |
| assoc_req->secinfo.auth_mode); |
| |
| /* If 'any' SSID was specified, find an SSID to associate with */ |
| if (test_bit(ASSOC_FLAG_SSID, &assoc_req->flags) |
| && !assoc_req->ssid_len) |
| find_any_ssid = 1; |
| |
| /* But don't use 'any' SSID if there's a valid locked BSSID to use */ |
| if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) { |
| if (compare_ether_addr(assoc_req->bssid, bssid_any) |
| && compare_ether_addr(assoc_req->bssid, bssid_off)) |
| find_any_ssid = 0; |
| } |
| |
| if (find_any_ssid) { |
| u8 new_mode = assoc_req->mode; |
| |
| ret = lbs_find_best_network_ssid(priv, assoc_req->ssid, |
| &assoc_req->ssid_len, assoc_req->mode, &new_mode); |
| if (ret) { |
| lbs_deb_assoc("Could not find best network\n"); |
| ret = -ENETUNREACH; |
| goto out; |
| } |
| |
| /* Ensure we switch to the mode of the AP */ |
| if (assoc_req->mode == IW_MODE_AUTO) { |
| set_bit(ASSOC_FLAG_MODE, &assoc_req->flags); |
| assoc_req->mode = new_mode; |
| } |
| } |
| |
| /* |
| * Check if the attributes being changing require deauthentication |
| * from the currently associated infrastructure access point. |
| */ |
| if (priv->mode == IW_MODE_INFRA) { |
| if (should_deauth_infrastructure(priv, assoc_req)) { |
| ret = lbs_cmd_80211_deauthenticate(priv, |
| priv->curbssparams.bssid, |
| WLAN_REASON_DEAUTH_LEAVING); |
| if (ret) { |
| lbs_deb_assoc("Deauthentication due to new " |
| "configuration request failed: %d\n", |
| ret); |
| } |
| } |
| } else if (priv->mode == IW_MODE_ADHOC) { |
| if (should_stop_adhoc(priv, assoc_req)) { |
| ret = lbs_adhoc_stop(priv); |
| if (ret) { |
| lbs_deb_assoc("Teardown of AdHoc network due to " |
| "new configuration request failed: %d\n", |
| ret); |
| } |
| |
| } |
| } |
| |
| /* Send the various configuration bits to the firmware */ |
| if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) { |
| ret = assoc_helper_mode(priv, assoc_req); |
| if (ret) |
| goto out; |
| } |
| |
| if (test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) { |
| ret = assoc_helper_channel(priv, assoc_req); |
| if (ret) |
| goto out; |
| } |
| |
| if ( test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags) |
| || test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) { |
| ret = assoc_helper_wep_keys(priv, assoc_req); |
| if (ret) |
| goto out; |
| } |
| |
| if (test_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags)) { |
| ret = assoc_helper_secinfo(priv, assoc_req); |
| if (ret) |
| goto out; |
| } |
| |
| if (test_bit(ASSOC_FLAG_WPA_IE, &assoc_req->flags)) { |
| ret = assoc_helper_wpa_ie(priv, assoc_req); |
| if (ret) |
| goto out; |
| } |
| |
| if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags) |
| || test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) { |
| ret = assoc_helper_wpa_keys(priv, assoc_req); |
| if (ret) |
| goto out; |
| } |
| |
| /* SSID/BSSID should be the _last_ config option set, because they |
| * trigger the association attempt. |
| */ |
| if (test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags) |
| || test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) { |
| int success = 1; |
| |
| ret = assoc_helper_associate(priv, assoc_req); |
| if (ret) { |
| lbs_deb_assoc("ASSOC: association unsuccessful: %d\n", |
| ret); |
| success = 0; |
| } |
| |
| if (priv->connect_status != LBS_CONNECTED) { |
| lbs_deb_assoc("ASSOC: association unsuccessful, " |
| "not connected\n"); |
| success = 0; |
| } |
| |
| if (success) { |
| lbs_deb_assoc("associated to %pM\n", |
| priv->curbssparams.bssid); |
| lbs_prepare_and_send_command(priv, |
| CMD_802_11_RSSI, |
| 0, CMD_OPTION_WAITFORRSP, 0, NULL); |
| } else { |
| ret = -1; |
| } |
| } |
| |
| out: |
| if (ret) { |
| lbs_deb_assoc("ASSOC: reconfiguration attempt unsuccessful: %d\n", |
| ret); |
| } |
| |
| mutex_lock(&priv->lock); |
| priv->in_progress_assoc_req = NULL; |
| mutex_unlock(&priv->lock); |
| kfree(assoc_req); |
| |
| done: |
| lbs_deb_leave(LBS_DEB_ASSOC); |
| } |
| |
| |
| /* |
| * Caller MUST hold any necessary locks |
| */ |
| struct assoc_request *lbs_get_association_request(struct lbs_private *priv) |
| { |
| struct assoc_request * assoc_req; |
| |
| lbs_deb_enter(LBS_DEB_ASSOC); |
| if (!priv->pending_assoc_req) { |
| priv->pending_assoc_req = kzalloc(sizeof(struct assoc_request), |
| GFP_KERNEL); |
| if (!priv->pending_assoc_req) { |
| lbs_pr_info("Not enough memory to allocate association" |
| " request!\n"); |
| return NULL; |
| } |
| } |
| |
| /* Copy current configuration attributes to the association request, |
| * but don't overwrite any that are already set. |
| */ |
| assoc_req = priv->pending_assoc_req; |
| if (!test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) { |
| memcpy(&assoc_req->ssid, &priv->curbssparams.ssid, |
| IW_ESSID_MAX_SIZE); |
| assoc_req->ssid_len = priv->curbssparams.ssid_len; |
| } |
| |
| if (!test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) |
| assoc_req->channel = priv->curbssparams.channel; |
| |
| if (!test_bit(ASSOC_FLAG_BAND, &assoc_req->flags)) |
| assoc_req->band = priv->curbssparams.band; |
| |
| if (!test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) |
| assoc_req->mode = priv->mode; |
| |
| if (!test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) { |
| memcpy(&assoc_req->bssid, priv->curbssparams.bssid, |
| ETH_ALEN); |
| } |
| |
| if (!test_bit(ASSOC_FLAG_WEP_KEYS, &assoc_req->flags)) { |
| int i; |
| for (i = 0; i < 4; i++) { |
| memcpy(&assoc_req->wep_keys[i], &priv->wep_keys[i], |
| sizeof(struct enc_key)); |
| } |
| } |
| |
| if (!test_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags)) |
| assoc_req->wep_tx_keyidx = priv->wep_tx_keyidx; |
| |
| if (!test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc_req->flags)) { |
| memcpy(&assoc_req->wpa_mcast_key, &priv->wpa_mcast_key, |
| sizeof(struct enc_key)); |
| } |
| |
| if (!test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc_req->flags)) { |
| memcpy(&assoc_req->wpa_unicast_key, &priv->wpa_unicast_key, |
| sizeof(struct enc_key)); |
| } |
| |
| if (!test_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags)) { |
| memcpy(&assoc_req->secinfo, &priv->secinfo, |
| sizeof(struct lbs_802_11_security)); |
| } |
| |
| if (!test_bit(ASSOC_FLAG_WPA_IE, &assoc_req->flags)) { |
| memcpy(&assoc_req->wpa_ie, &priv->wpa_ie, |
| MAX_WPA_IE_LEN); |
| assoc_req->wpa_ie_len = priv->wpa_ie_len; |
| } |
| |
| lbs_deb_leave(LBS_DEB_ASSOC); |
| return assoc_req; |
| } |
| |
| |
| /** |
| * @brief Deauthenticate from a specific BSS |
| * |
| * @param priv A pointer to struct lbs_private structure |
| * @param bssid The specific BSS to deauthenticate from |
| * @param reason The 802.11 sec. 7.3.1.7 Reason Code for deauthenticating |
| * |
| * @return 0 on success, error on failure |
| */ |
| int lbs_cmd_80211_deauthenticate(struct lbs_private *priv, u8 bssid[ETH_ALEN], |
| u16 reason) |
| { |
| struct cmd_ds_802_11_deauthenticate cmd; |
| int ret; |
| |
| lbs_deb_enter(LBS_DEB_JOIN); |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.hdr.size = cpu_to_le16(sizeof(cmd)); |
| memcpy(cmd.macaddr, &bssid[0], ETH_ALEN); |
| cmd.reasoncode = cpu_to_le16(reason); |
| |
| ret = lbs_cmd_with_response(priv, CMD_802_11_DEAUTHENTICATE, &cmd); |
| |
| /* Clean up everything even if there was an error; can't assume that |
| * we're still authenticated to the AP after trying to deauth. |
| */ |
| lbs_mac_event_disconnected(priv); |
| |
| lbs_deb_leave(LBS_DEB_JOIN); |
| return ret; |
| } |
| |