| /* |
| * Gadget Function Driver for MTP |
| * |
| * Copyright (C) 2010 Google, Inc. |
| * Author: Mike Lockwood <lockwood@android.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| /* #define DEBUG */ |
| /* #define VERBOSE_DEBUG */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/poll.h> |
| #include <linux/delay.h> |
| #include <linux/wait.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| |
| #include <linux/types.h> |
| #include <linux/file.h> |
| #include <linux/device.h> |
| #include <linux/miscdevice.h> |
| |
| #include <linux/usb.h> |
| #include <linux/usb_usual.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/android_composite.h> |
| #include <linux/usb/f_mtp.h> |
| |
| #define BULK_BUFFER_SIZE 16384 |
| #define INTR_BUFFER_SIZE 28 |
| |
| /* String IDs */ |
| #define INTERFACE_STRING_INDEX 0 |
| |
| /* values for mtp_dev.state */ |
| #define STATE_OFFLINE 0 /* initial state, disconnected */ |
| #define STATE_READY 1 /* ready for userspace calls */ |
| #define STATE_BUSY 2 /* processing userspace calls */ |
| #define STATE_CANCELED 3 /* transaction canceled by host */ |
| #define STATE_ERROR 4 /* error from completion routine */ |
| |
| /* number of tx and rx requests to allocate */ |
| #define TX_REQ_MAX 4 |
| #define RX_REQ_MAX 2 |
| |
| /* ID for Microsoft MTP OS String */ |
| #define MTP_OS_STRING_ID 0xEE |
| |
| /* MTP class reqeusts */ |
| #define MTP_REQ_CANCEL 0x64 |
| #define MTP_REQ_GET_EXT_EVENT_DATA 0x65 |
| #define MTP_REQ_RESET 0x66 |
| #define MTP_REQ_GET_DEVICE_STATUS 0x67 |
| |
| /* constants for device status */ |
| #define MTP_RESPONSE_OK 0x2001 |
| #define MTP_RESPONSE_DEVICE_BUSY 0x2019 |
| |
| static const char shortname[] = "mtp_usb"; |
| |
| struct mtp_dev { |
| struct usb_function function; |
| struct usb_composite_dev *cdev; |
| spinlock_t lock; |
| |
| /* appear as MTP or PTP when enumerating */ |
| int interface_mode; |
| |
| struct usb_ep *ep_in; |
| struct usb_ep *ep_out; |
| struct usb_ep *ep_intr; |
| |
| int state; |
| |
| /* synchronize access to our device file */ |
| atomic_t open_excl; |
| /* to enforce only one ioctl at a time */ |
| atomic_t ioctl_excl; |
| |
| struct list_head tx_idle; |
| |
| wait_queue_head_t read_wq; |
| wait_queue_head_t write_wq; |
| struct usb_request *rx_req[RX_REQ_MAX]; |
| struct usb_request *intr_req; |
| int rx_done; |
| /* true if interrupt endpoint is busy */ |
| int intr_busy; |
| |
| /* for processing MTP_SEND_FILE and MTP_RECEIVE_FILE |
| * ioctls on a work queue |
| */ |
| struct workqueue_struct *wq; |
| struct work_struct send_file_work; |
| struct work_struct receive_file_work; |
| struct file *xfer_file; |
| loff_t xfer_file_offset; |
| int64_t xfer_file_length; |
| int xfer_result; |
| }; |
| |
| static struct usb_interface_descriptor mtp_interface_desc = { |
| .bLength = USB_DT_INTERFACE_SIZE, |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0, |
| .bNumEndpoints = 3, |
| .bInterfaceClass = USB_CLASS_VENDOR_SPEC, |
| .bInterfaceSubClass = USB_SUBCLASS_VENDOR_SPEC, |
| .bInterfaceProtocol = 0, |
| }; |
| |
| static struct usb_interface_descriptor ptp_interface_desc = { |
| .bLength = USB_DT_INTERFACE_SIZE, |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = 0, |
| .bNumEndpoints = 3, |
| .bInterfaceClass = USB_CLASS_STILL_IMAGE, |
| .bInterfaceSubClass = 1, |
| .bInterfaceProtocol = 1, |
| }; |
| |
| static struct usb_endpoint_descriptor mtp_highspeed_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = __constant_cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor mtp_highspeed_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = __constant_cpu_to_le16(512), |
| }; |
| |
| static struct usb_endpoint_descriptor mtp_fullspeed_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor mtp_fullspeed_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| }; |
| |
| static struct usb_endpoint_descriptor mtp_intr_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_INT, |
| .wMaxPacketSize = __constant_cpu_to_le16(INTR_BUFFER_SIZE), |
| .bInterval = 6, |
| }; |
| |
| static struct usb_descriptor_header *fs_mtp_descs[] = { |
| (struct usb_descriptor_header *) &mtp_interface_desc, |
| (struct usb_descriptor_header *) &mtp_fullspeed_in_desc, |
| (struct usb_descriptor_header *) &mtp_fullspeed_out_desc, |
| (struct usb_descriptor_header *) &mtp_intr_desc, |
| NULL, |
| }; |
| |
| static struct usb_descriptor_header *hs_mtp_descs[] = { |
| (struct usb_descriptor_header *) &mtp_interface_desc, |
| (struct usb_descriptor_header *) &mtp_highspeed_in_desc, |
| (struct usb_descriptor_header *) &mtp_highspeed_out_desc, |
| (struct usb_descriptor_header *) &mtp_intr_desc, |
| NULL, |
| }; |
| |
| static struct usb_descriptor_header *fs_ptp_descs[] = { |
| (struct usb_descriptor_header *) &ptp_interface_desc, |
| (struct usb_descriptor_header *) &mtp_fullspeed_in_desc, |
| (struct usb_descriptor_header *) &mtp_fullspeed_out_desc, |
| (struct usb_descriptor_header *) &mtp_intr_desc, |
| NULL, |
| }; |
| |
| static struct usb_descriptor_header *hs_ptp_descs[] = { |
| (struct usb_descriptor_header *) &ptp_interface_desc, |
| (struct usb_descriptor_header *) &mtp_highspeed_in_desc, |
| (struct usb_descriptor_header *) &mtp_highspeed_out_desc, |
| (struct usb_descriptor_header *) &mtp_intr_desc, |
| NULL, |
| }; |
| |
| static struct usb_string mtp_string_defs[] = { |
| /* Naming interface "MTP" so libmtp will recognize us */ |
| [INTERFACE_STRING_INDEX].s = "MTP", |
| { }, /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings mtp_string_table = { |
| .language = 0x0409, /* en-US */ |
| .strings = mtp_string_defs, |
| }; |
| |
| static struct usb_gadget_strings *mtp_strings[] = { |
| &mtp_string_table, |
| NULL, |
| }; |
| |
| /* Microsoft MTP OS String */ |
| static u8 mtp_os_string[] = { |
| 18, /* sizeof(mtp_os_string) */ |
| USB_DT_STRING, |
| /* Signature field: "MSFT100" */ |
| 'M', 0, 'S', 0, 'F', 0, 'T', 0, '1', 0, '0', 0, '0', 0, |
| /* vendor code */ |
| 1, |
| /* padding */ |
| 0 |
| }; |
| |
| /* Microsoft Extended Configuration Descriptor Header Section */ |
| struct mtp_ext_config_desc_header { |
| __le32 dwLength; |
| __u16 bcdVersion; |
| __le16 wIndex; |
| __u8 bCount; |
| __u8 reserved[7]; |
| }; |
| |
| /* Microsoft Extended Configuration Descriptor Function Section */ |
| struct mtp_ext_config_desc_function { |
| __u8 bFirstInterfaceNumber; |
| __u8 bInterfaceCount; |
| __u8 compatibleID[8]; |
| __u8 subCompatibleID[8]; |
| __u8 reserved[6]; |
| }; |
| |
| /* MTP Extended Configuration Descriptor */ |
| struct { |
| struct mtp_ext_config_desc_header header; |
| struct mtp_ext_config_desc_function function; |
| } mtp_ext_config_desc = { |
| .header = { |
| .dwLength = __constant_cpu_to_le32(sizeof(mtp_ext_config_desc)), |
| .bcdVersion = __constant_cpu_to_le16(0x0100), |
| .wIndex = __constant_cpu_to_le16(4), |
| .bCount = __constant_cpu_to_le16(1), |
| }, |
| .function = { |
| .bFirstInterfaceNumber = 0, |
| .bInterfaceCount = 1, |
| .compatibleID = { 'M', 'T', 'P' }, |
| }, |
| }; |
| |
| struct mtp_device_status { |
| __le16 wLength; |
| __le16 wCode; |
| }; |
| |
| /* temporary variable used between mtp_open() and mtp_gadget_bind() */ |
| static struct mtp_dev *_mtp_dev; |
| |
| static inline struct mtp_dev *func_to_dev(struct usb_function *f) |
| { |
| return container_of(f, struct mtp_dev, function); |
| } |
| |
| static struct usb_request *mtp_request_new(struct usb_ep *ep, int buffer_size) |
| { |
| struct usb_request *req = usb_ep_alloc_request(ep, GFP_KERNEL); |
| if (!req) |
| return NULL; |
| |
| /* now allocate buffers for the requests */ |
| req->buf = kmalloc(buffer_size, GFP_KERNEL); |
| if (!req->buf) { |
| usb_ep_free_request(ep, req); |
| return NULL; |
| } |
| |
| return req; |
| } |
| |
| static void mtp_request_free(struct usb_request *req, struct usb_ep *ep) |
| { |
| if (req) { |
| kfree(req->buf); |
| usb_ep_free_request(ep, req); |
| } |
| } |
| |
| static inline int _lock(atomic_t *excl) |
| { |
| if (atomic_inc_return(excl) == 1) { |
| return 0; |
| } else { |
| atomic_dec(excl); |
| return -1; |
| } |
| } |
| |
| static inline void _unlock(atomic_t *excl) |
| { |
| atomic_dec(excl); |
| } |
| |
| /* add a request to the tail of a list */ |
| static void req_put(struct mtp_dev *dev, struct list_head *head, |
| struct usb_request *req) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| list_add_tail(&req->list, head); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } |
| |
| /* remove a request from the head of a list */ |
| static struct usb_request *req_get(struct mtp_dev *dev, struct list_head *head) |
| { |
| unsigned long flags; |
| struct usb_request *req; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (list_empty(head)) { |
| req = 0; |
| } else { |
| req = list_first_entry(head, struct usb_request, list); |
| list_del(&req->list); |
| } |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return req; |
| } |
| |
| static void mtp_complete_in(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct mtp_dev *dev = _mtp_dev; |
| |
| if (req->status != 0) |
| dev->state = STATE_ERROR; |
| |
| req_put(dev, &dev->tx_idle, req); |
| |
| wake_up(&dev->write_wq); |
| } |
| |
| static void mtp_complete_out(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct mtp_dev *dev = _mtp_dev; |
| |
| dev->rx_done = 1; |
| if (req->status != 0) |
| dev->state = STATE_ERROR; |
| |
| wake_up(&dev->read_wq); |
| } |
| |
| static void mtp_complete_intr(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct mtp_dev *dev = _mtp_dev; |
| |
| DBG(dev->cdev, "mtp_complete_intr status: %d actual: %d\n", |
| req->status, req->actual); |
| dev->intr_busy = 0; |
| if (req->status != 0) |
| dev->state = STATE_ERROR; |
| } |
| |
| static int __init create_bulk_endpoints(struct mtp_dev *dev, |
| struct usb_endpoint_descriptor *in_desc, |
| struct usb_endpoint_descriptor *out_desc, |
| struct usb_endpoint_descriptor *intr_desc) |
| { |
| struct usb_composite_dev *cdev = dev->cdev; |
| struct usb_request *req; |
| struct usb_ep *ep; |
| int i; |
| |
| DBG(cdev, "create_bulk_endpoints dev: %p\n", dev); |
| |
| ep = usb_ep_autoconfig(cdev->gadget, in_desc); |
| if (!ep) { |
| DBG(cdev, "usb_ep_autoconfig for ep_in failed\n"); |
| return -ENODEV; |
| } |
| DBG(cdev, "usb_ep_autoconfig for ep_in got %s\n", ep->name); |
| ep->driver_data = dev; /* claim the endpoint */ |
| dev->ep_in = ep; |
| |
| ep = usb_ep_autoconfig(cdev->gadget, out_desc); |
| if (!ep) { |
| DBG(cdev, "usb_ep_autoconfig for ep_out failed\n"); |
| return -ENODEV; |
| } |
| DBG(cdev, "usb_ep_autoconfig for mtp ep_out got %s\n", ep->name); |
| ep->driver_data = dev; /* claim the endpoint */ |
| dev->ep_out = ep; |
| |
| ep = usb_ep_autoconfig(cdev->gadget, out_desc); |
| if (!ep) { |
| DBG(cdev, "usb_ep_autoconfig for ep_out failed\n"); |
| return -ENODEV; |
| } |
| DBG(cdev, "usb_ep_autoconfig for mtp ep_out got %s\n", ep->name); |
| ep->driver_data = dev; /* claim the endpoint */ |
| dev->ep_out = ep; |
| |
| ep = usb_ep_autoconfig(cdev->gadget, intr_desc); |
| if (!ep) { |
| DBG(cdev, "usb_ep_autoconfig for ep_intr failed\n"); |
| return -ENODEV; |
| } |
| DBG(cdev, "usb_ep_autoconfig for mtp ep_intr got %s\n", ep->name); |
| ep->driver_data = dev; /* claim the endpoint */ |
| dev->ep_intr = ep; |
| |
| /* now allocate requests for our endpoints */ |
| for (i = 0; i < TX_REQ_MAX; i++) { |
| req = mtp_request_new(dev->ep_in, BULK_BUFFER_SIZE); |
| if (!req) |
| goto fail; |
| req->complete = mtp_complete_in; |
| req_put(dev, &dev->tx_idle, req); |
| } |
| for (i = 0; i < RX_REQ_MAX; i++) { |
| req = mtp_request_new(dev->ep_out, BULK_BUFFER_SIZE); |
| if (!req) |
| goto fail; |
| req->complete = mtp_complete_out; |
| dev->rx_req[i] = req; |
| } |
| req = mtp_request_new(dev->ep_intr, INTR_BUFFER_SIZE); |
| if (!req) |
| goto fail; |
| req->complete = mtp_complete_intr; |
| dev->intr_req = req; |
| |
| return 0; |
| |
| fail: |
| printk(KERN_ERR "mtp_bind() could not allocate requests\n"); |
| return -1; |
| } |
| |
| static ssize_t mtp_read(struct file *fp, char __user *buf, |
| size_t count, loff_t *pos) |
| { |
| struct mtp_dev *dev = fp->private_data; |
| struct usb_composite_dev *cdev = dev->cdev; |
| struct usb_request *req; |
| int r = count, xfer; |
| int ret = 0; |
| |
| DBG(cdev, "mtp_read(%d)\n", count); |
| |
| if (count > BULK_BUFFER_SIZE) |
| return -EINVAL; |
| |
| /* we will block until we're online */ |
| DBG(cdev, "mtp_read: waiting for online state\n"); |
| ret = wait_event_interruptible(dev->read_wq, |
| dev->state != STATE_OFFLINE); |
| if (ret < 0) { |
| r = ret; |
| goto done; |
| } |
| spin_lock_irq(&dev->lock); |
| if (dev->state == STATE_CANCELED) { |
| /* report cancelation to userspace */ |
| dev->state = STATE_READY; |
| spin_unlock_irq(&dev->lock); |
| return -ECANCELED; |
| } |
| dev->state = STATE_BUSY; |
| spin_unlock_irq(&dev->lock); |
| |
| requeue_req: |
| /* queue a request */ |
| req = dev->rx_req[0]; |
| req->length = count; |
| dev->rx_done = 0; |
| ret = usb_ep_queue(dev->ep_out, req, GFP_KERNEL); |
| if (ret < 0) { |
| r = -EIO; |
| goto done; |
| } else { |
| DBG(cdev, "rx %p queue\n", req); |
| } |
| |
| /* wait for a request to complete */ |
| ret = wait_event_interruptible(dev->read_wq, dev->rx_done); |
| if (ret < 0) { |
| r = ret; |
| goto done; |
| } |
| if (dev->state == STATE_BUSY) { |
| /* If we got a 0-len packet, throw it back and try again. */ |
| if (req->actual == 0) |
| goto requeue_req; |
| |
| DBG(cdev, "rx %p %d\n", req, req->actual); |
| xfer = (req->actual < count) ? req->actual : count; |
| r = xfer; |
| if (copy_to_user(buf, req->buf, xfer)) |
| r = -EFAULT; |
| } else |
| r = -EIO; |
| |
| done: |
| spin_lock_irq(&dev->lock); |
| if (dev->state == STATE_CANCELED) |
| r = -ECANCELED; |
| else if (dev->state != STATE_OFFLINE) |
| dev->state = STATE_READY; |
| spin_unlock_irq(&dev->lock); |
| |
| DBG(cdev, "mtp_read returning %d\n", r); |
| return r; |
| } |
| |
| static ssize_t mtp_write(struct file *fp, const char __user *buf, |
| size_t count, loff_t *pos) |
| { |
| struct mtp_dev *dev = fp->private_data; |
| struct usb_composite_dev *cdev = dev->cdev; |
| struct usb_request *req = 0; |
| int r = count, xfer; |
| int sendZLP = 0; |
| int ret; |
| |
| DBG(cdev, "mtp_write(%d)\n", count); |
| |
| spin_lock_irq(&dev->lock); |
| if (dev->state == STATE_CANCELED) { |
| /* report cancelation to userspace */ |
| dev->state = STATE_READY; |
| spin_unlock_irq(&dev->lock); |
| return -ECANCELED; |
| } |
| if (dev->state == STATE_OFFLINE) { |
| spin_unlock_irq(&dev->lock); |
| return -ENODEV; |
| } |
| dev->state = STATE_BUSY; |
| spin_unlock_irq(&dev->lock); |
| |
| /* we need to send a zero length packet to signal the end of transfer |
| * if the transfer size is aligned to a packet boundary. |
| */ |
| if ((count & (dev->ep_in->maxpacket - 1)) == 0) { |
| sendZLP = 1; |
| } |
| |
| while (count > 0 || sendZLP) { |
| /* so we exit after sending ZLP */ |
| if (count == 0) |
| sendZLP = 0; |
| |
| if (dev->state != STATE_BUSY) { |
| DBG(cdev, "mtp_write dev->error\n"); |
| r = -EIO; |
| break; |
| } |
| |
| /* get an idle tx request to use */ |
| req = 0; |
| ret = wait_event_interruptible(dev->write_wq, |
| ((req = req_get(dev, &dev->tx_idle)) |
| || dev->state != STATE_BUSY)); |
| if (!req) { |
| r = ret; |
| break; |
| } |
| |
| if (count > BULK_BUFFER_SIZE) |
| xfer = BULK_BUFFER_SIZE; |
| else |
| xfer = count; |
| if (xfer && copy_from_user(req->buf, buf, xfer)) { |
| r = -EFAULT; |
| break; |
| } |
| |
| req->length = xfer; |
| ret = usb_ep_queue(dev->ep_in, req, GFP_KERNEL); |
| if (ret < 0) { |
| DBG(cdev, "mtp_write: xfer error %d\n", ret); |
| r = -EIO; |
| break; |
| } |
| |
| buf += xfer; |
| count -= xfer; |
| |
| /* zero this so we don't try to free it on error exit */ |
| req = 0; |
| } |
| |
| if (req) |
| req_put(dev, &dev->tx_idle, req); |
| |
| spin_lock_irq(&dev->lock); |
| if (dev->state == STATE_CANCELED) |
| r = -ECANCELED; |
| else if (dev->state != STATE_OFFLINE) |
| dev->state = STATE_READY; |
| spin_unlock_irq(&dev->lock); |
| |
| DBG(cdev, "mtp_write returning %d\n", r); |
| return r; |
| } |
| |
| /* read from a local file and write to USB */ |
| static void send_file_work(struct work_struct *data) { |
| struct mtp_dev *dev = container_of(data, struct mtp_dev, send_file_work); |
| struct usb_composite_dev *cdev = dev->cdev; |
| struct usb_request *req = 0; |
| struct file *filp; |
| loff_t offset; |
| int64_t count; |
| int xfer, ret; |
| int r = 0; |
| int sendZLP = 0; |
| |
| /* read our parameters */ |
| smp_rmb(); |
| filp = dev->xfer_file; |
| offset = dev->xfer_file_offset; |
| count = dev->xfer_file_length; |
| |
| DBG(cdev, "send_file_work(%lld %lld)\n", offset, count); |
| |
| /* we need to send a zero length packet to signal the end of transfer |
| * if the transfer size is aligned to a packet boundary. |
| */ |
| if ((dev->xfer_file_length & (dev->ep_in->maxpacket - 1)) == 0) { |
| sendZLP = 1; |
| } |
| |
| while (count > 0 || sendZLP) { |
| /* so we exit after sending ZLP */ |
| if (count == 0) |
| sendZLP = 0; |
| |
| /* get an idle tx request to use */ |
| req = 0; |
| ret = wait_event_interruptible(dev->write_wq, |
| (req = req_get(dev, &dev->tx_idle)) |
| || dev->state != STATE_BUSY); |
| if (dev->state == STATE_CANCELED) { |
| r = -ECANCELED; |
| break; |
| } |
| if (!req) { |
| r = ret; |
| break; |
| } |
| |
| if (count > BULK_BUFFER_SIZE) |
| xfer = BULK_BUFFER_SIZE; |
| else |
| xfer = count; |
| ret = vfs_read(filp, req->buf, xfer, &offset); |
| if (ret < 0) { |
| r = ret; |
| break; |
| } |
| xfer = ret; |
| |
| req->length = xfer; |
| ret = usb_ep_queue(dev->ep_in, req, GFP_KERNEL); |
| if (ret < 0) { |
| DBG(cdev, "send_file_work: xfer error %d\n", ret); |
| dev->state = STATE_ERROR; |
| r = -EIO; |
| break; |
| } |
| |
| count -= xfer; |
| |
| /* zero this so we don't try to free it on error exit */ |
| req = 0; |
| } |
| |
| if (req) |
| req_put(dev, &dev->tx_idle, req); |
| |
| DBG(cdev, "send_file_work returning %d\n", r); |
| /* write the result */ |
| dev->xfer_result = r; |
| smp_wmb(); |
| } |
| |
| /* read from USB and write to a local file */ |
| static void receive_file_work(struct work_struct *data) |
| { |
| struct mtp_dev *dev = container_of(data, struct mtp_dev, receive_file_work); |
| struct usb_composite_dev *cdev = dev->cdev; |
| struct usb_request *read_req = NULL, *write_req = NULL; |
| struct file *filp; |
| loff_t offset; |
| int64_t count; |
| int ret, cur_buf = 0; |
| int r = 0; |
| |
| /* read our parameters */ |
| smp_rmb(); |
| filp = dev->xfer_file; |
| offset = dev->xfer_file_offset; |
| count = dev->xfer_file_length; |
| |
| DBG(cdev, "receive_file_work(%lld)\n", count); |
| |
| while (count > 0 || write_req) { |
| if (count > 0) { |
| /* queue a request */ |
| read_req = dev->rx_req[cur_buf]; |
| cur_buf = (cur_buf + 1) % RX_REQ_MAX; |
| |
| read_req->length = (count > BULK_BUFFER_SIZE |
| ? BULK_BUFFER_SIZE : count); |
| dev->rx_done = 0; |
| ret = usb_ep_queue(dev->ep_out, read_req, GFP_KERNEL); |
| if (ret < 0) { |
| r = -EIO; |
| dev->state = STATE_ERROR; |
| break; |
| } |
| } |
| |
| if (write_req) { |
| DBG(cdev, "rx %p %d\n", write_req, write_req->actual); |
| ret = vfs_write(filp, write_req->buf, write_req->actual, |
| &offset); |
| DBG(cdev, "vfs_write %d\n", ret); |
| if (ret != write_req->actual) { |
| r = -EIO; |
| dev->state = STATE_ERROR; |
| break; |
| } |
| write_req = NULL; |
| } |
| |
| if (read_req) { |
| /* wait for our last read to complete */ |
| ret = wait_event_interruptible(dev->read_wq, |
| dev->rx_done || dev->state != STATE_BUSY); |
| if (dev->state == STATE_CANCELED) { |
| r = -ECANCELED; |
| if (!dev->rx_done) |
| usb_ep_dequeue(dev->ep_out, read_req); |
| break; |
| } |
| /* if xfer_file_length is 0xFFFFFFFF, then we read until |
| * we get a zero length packet |
| */ |
| if (count != 0xFFFFFFFF) |
| count -= read_req->actual; |
| if (read_req->actual < read_req->length) { |
| /* short packet is used to signal EOF for sizes > 4 gig */ |
| DBG(cdev, "got short packet\n"); |
| count = 0; |
| } |
| |
| write_req = read_req; |
| read_req = NULL; |
| } |
| } |
| |
| DBG(cdev, "receive_file_work returning %d\n", r); |
| /* write the result */ |
| dev->xfer_result = r; |
| smp_wmb(); |
| } |
| |
| static int mtp_send_event(struct mtp_dev *dev, struct mtp_event *event) |
| { |
| struct usb_request *req; |
| int ret; |
| int length = event->length; |
| |
| DBG(dev->cdev, "mtp_send_event(%d)\n", event->length); |
| |
| if (length < 0 || length > INTR_BUFFER_SIZE) |
| return -EINVAL; |
| if (dev->state == STATE_OFFLINE) |
| return -ENODEV; |
| /* unfortunately an interrupt request might hang indefinitely if the host |
| * is not listening on the interrupt endpoint, so instead of waiting, |
| * we just fail if the endpoint is busy. |
| */ |
| if (dev->intr_busy) |
| return -EBUSY; |
| |
| req = dev->intr_req; |
| if (copy_from_user(req->buf, (void __user *)event->data, length)) |
| return -EFAULT; |
| req->length = length; |
| dev->intr_busy = 1; |
| ret = usb_ep_queue(dev->ep_intr, req, GFP_KERNEL); |
| if (ret) |
| dev->intr_busy = 0; |
| |
| return ret; |
| } |
| |
| static long mtp_ioctl(struct file *fp, unsigned code, unsigned long value) |
| { |
| struct mtp_dev *dev = fp->private_data; |
| struct file *filp = NULL; |
| int ret = -EINVAL; |
| |
| if (_lock(&dev->ioctl_excl)) |
| return -EBUSY; |
| |
| switch (code) { |
| case MTP_SEND_FILE: |
| case MTP_RECEIVE_FILE: |
| { |
| struct mtp_file_range mfr; |
| struct work_struct *work; |
| |
| spin_lock_irq(&dev->lock); |
| if (dev->state == STATE_CANCELED) { |
| /* report cancelation to userspace */ |
| dev->state = STATE_READY; |
| spin_unlock_irq(&dev->lock); |
| ret = -ECANCELED; |
| goto out; |
| } |
| if (dev->state == STATE_OFFLINE) { |
| spin_unlock_irq(&dev->lock); |
| ret = -ENODEV; |
| goto out; |
| } |
| dev->state = STATE_BUSY; |
| spin_unlock_irq(&dev->lock); |
| |
| if (copy_from_user(&mfr, (void __user *)value, sizeof(mfr))) { |
| ret = -EFAULT; |
| goto fail; |
| } |
| /* hold a reference to the file while we are working with it */ |
| filp = fget(mfr.fd); |
| if (!filp) { |
| ret = -EBADF; |
| goto fail; |
| } |
| |
| /* write the parameters */ |
| dev->xfer_file = filp; |
| dev->xfer_file_offset = mfr.offset; |
| dev->xfer_file_length = mfr.length; |
| smp_wmb(); |
| |
| if (code == MTP_SEND_FILE) |
| work = &dev->send_file_work; |
| else |
| work = &dev->receive_file_work; |
| |
| /* We do the file transfer on a work queue so it will run |
| * in kernel context, which is necessary for vfs_read and |
| * vfs_write to use our buffers in the kernel address space. |
| */ |
| queue_work(dev->wq, work); |
| /* wait for operation to complete */ |
| flush_workqueue(dev->wq); |
| fput(filp); |
| |
| /* read the result */ |
| smp_rmb(); |
| ret = dev->xfer_result; |
| break; |
| } |
| case MTP_SET_INTERFACE_MODE: |
| if (value == MTP_INTERFACE_MODE_MTP || |
| value == MTP_INTERFACE_MODE_PTP) { |
| dev->interface_mode = value; |
| if (value == MTP_INTERFACE_MODE_PTP) { |
| dev->function.descriptors = fs_ptp_descs; |
| dev->function.hs_descriptors = hs_ptp_descs; |
| } else { |
| dev->function.descriptors = fs_mtp_descs; |
| dev->function.hs_descriptors = hs_mtp_descs; |
| } |
| ret = 0; |
| } |
| break; |
| case MTP_SEND_EVENT: |
| { |
| struct mtp_event event; |
| /* return here so we don't change dev->state below, |
| * which would interfere with bulk transfer state. |
| */ |
| if (copy_from_user(&event, (void __user *)value, sizeof(event))) |
| ret = -EFAULT; |
| else |
| ret = mtp_send_event(dev, &event); |
| goto out; |
| } |
| } |
| |
| fail: |
| spin_lock_irq(&dev->lock); |
| if (dev->state == STATE_CANCELED) |
| ret = -ECANCELED; |
| else if (dev->state != STATE_OFFLINE) |
| dev->state = STATE_READY; |
| spin_unlock_irq(&dev->lock); |
| out: |
| _unlock(&dev->ioctl_excl); |
| DBG(dev->cdev, "ioctl returning %d\n", ret); |
| return ret; |
| } |
| |
| static int mtp_open(struct inode *ip, struct file *fp) |
| { |
| printk(KERN_INFO "mtp_open\n"); |
| if (_lock(&_mtp_dev->open_excl)) |
| return -EBUSY; |
| |
| /* clear any error condition */ |
| if (_mtp_dev->state != STATE_OFFLINE) |
| _mtp_dev->state = STATE_READY; |
| |
| fp->private_data = _mtp_dev; |
| return 0; |
| } |
| |
| static int mtp_release(struct inode *ip, struct file *fp) |
| { |
| printk(KERN_INFO "mtp_release\n"); |
| |
| _unlock(&_mtp_dev->open_excl); |
| return 0; |
| } |
| |
| /* file operations for /dev/mtp_usb */ |
| static const struct file_operations mtp_fops = { |
| .owner = THIS_MODULE, |
| .read = mtp_read, |
| .write = mtp_write, |
| .unlocked_ioctl = mtp_ioctl, |
| .open = mtp_open, |
| .release = mtp_release, |
| }; |
| |
| static struct miscdevice mtp_device = { |
| .minor = MISC_DYNAMIC_MINOR, |
| .name = shortname, |
| .fops = &mtp_fops, |
| }; |
| |
| static int |
| mtp_function_bind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct usb_composite_dev *cdev = c->cdev; |
| struct mtp_dev *dev = func_to_dev(f); |
| int id; |
| int ret; |
| |
| dev->cdev = cdev; |
| DBG(cdev, "mtp_function_bind dev: %p\n", dev); |
| |
| /* allocate interface ID(s) */ |
| id = usb_interface_id(c, f); |
| if (id < 0) |
| return id; |
| mtp_interface_desc.bInterfaceNumber = id; |
| |
| /* allocate endpoints */ |
| ret = create_bulk_endpoints(dev, &mtp_fullspeed_in_desc, |
| &mtp_fullspeed_out_desc, &mtp_intr_desc); |
| if (ret) |
| return ret; |
| |
| /* support high speed hardware */ |
| if (gadget_is_dualspeed(c->cdev->gadget)) { |
| mtp_highspeed_in_desc.bEndpointAddress = |
| mtp_fullspeed_in_desc.bEndpointAddress; |
| mtp_highspeed_out_desc.bEndpointAddress = |
| mtp_fullspeed_out_desc.bEndpointAddress; |
| } |
| |
| DBG(cdev, "%s speed %s: IN/%s, OUT/%s\n", |
| gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", |
| f->name, dev->ep_in->name, dev->ep_out->name); |
| return 0; |
| } |
| |
| static void |
| mtp_function_unbind(struct usb_configuration *c, struct usb_function *f) |
| { |
| struct mtp_dev *dev = func_to_dev(f); |
| struct usb_request *req; |
| int i; |
| |
| spin_lock_irq(&dev->lock); |
| while ((req = req_get(dev, &dev->tx_idle))) |
| mtp_request_free(req, dev->ep_in); |
| for (i = 0; i < RX_REQ_MAX; i++) |
| mtp_request_free(dev->rx_req[i], dev->ep_out); |
| mtp_request_free(dev->intr_req, dev->ep_intr); |
| dev->state = STATE_OFFLINE; |
| spin_unlock_irq(&dev->lock); |
| |
| misc_deregister(&mtp_device); |
| kfree(_mtp_dev); |
| _mtp_dev = NULL; |
| } |
| |
| static int mtp_function_setup(struct usb_function *f, |
| const struct usb_ctrlrequest *ctrl) |
| { |
| struct mtp_dev *dev = func_to_dev(f); |
| struct usb_composite_dev *cdev = dev->cdev; |
| int value = -EOPNOTSUPP; |
| u16 w_index = le16_to_cpu(ctrl->wIndex); |
| u16 w_value = le16_to_cpu(ctrl->wValue); |
| u16 w_length = le16_to_cpu(ctrl->wLength); |
| unsigned long flags; |
| |
| /* do nothing if we are disabled */ |
| if (dev->function.disabled) |
| return value; |
| |
| VDBG(cdev, "mtp_function_setup " |
| "%02x.%02x v%04x i%04x l%u\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| |
| /* Handle MTP OS string */ |
| if (dev->interface_mode == MTP_INTERFACE_MODE_MTP |
| && ctrl->bRequestType == |
| (USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE) |
| && ctrl->bRequest == USB_REQ_GET_DESCRIPTOR |
| && (w_value >> 8) == USB_DT_STRING |
| && (w_value & 0xFF) == MTP_OS_STRING_ID) { |
| value = (w_length < sizeof(mtp_os_string) |
| ? w_length : sizeof(mtp_os_string)); |
| memcpy(cdev->req->buf, mtp_os_string, value); |
| /* return here since composite.c will send for us */ |
| return value; |
| } |
| if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_VENDOR) { |
| /* Handle MTP OS descriptor */ |
| DBG(cdev, "vendor request: %d index: %d value: %d length: %d\n", |
| ctrl->bRequest, w_index, w_value, w_length); |
| |
| if (dev->interface_mode == MTP_INTERFACE_MODE_MTP |
| && ctrl->bRequest == 1 |
| && (ctrl->bRequestType & USB_DIR_IN) |
| && (w_index == 4 || w_index == 5)) { |
| value = (w_length < sizeof(mtp_ext_config_desc) ? |
| w_length : sizeof(mtp_ext_config_desc)); |
| memcpy(cdev->req->buf, &mtp_ext_config_desc, value); |
| } |
| } |
| if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) { |
| DBG(cdev, "class request: %d index: %d value: %d length: %d\n", |
| ctrl->bRequest, w_index, w_value, w_length); |
| |
| if (ctrl->bRequest == MTP_REQ_CANCEL && w_index == 0 |
| && w_value == 0) { |
| DBG(cdev, "MTP_REQ_CANCEL\n"); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (dev->state == STATE_BUSY) { |
| dev->state = STATE_CANCELED; |
| wake_up(&dev->read_wq); |
| wake_up(&dev->write_wq); |
| } |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| /* We need to queue a request to read the remaining |
| * bytes, but we don't actually need to look at |
| * the contents. |
| */ |
| value = w_length; |
| } else if (ctrl->bRequest == MTP_REQ_GET_DEVICE_STATUS |
| && w_index == 0 && w_value == 0) { |
| struct mtp_device_status *status = cdev->req->buf; |
| status->wLength = |
| __constant_cpu_to_le16(sizeof(*status)); |
| |
| DBG(cdev, "MTP_REQ_GET_DEVICE_STATUS\n"); |
| spin_lock_irqsave(&dev->lock, flags); |
| /* device status is "busy" until we report |
| * the cancelation to userspace |
| */ |
| if (dev->state == STATE_CANCELED) |
| status->wCode = |
| __cpu_to_le16(MTP_RESPONSE_DEVICE_BUSY); |
| else |
| status->wCode = |
| __cpu_to_le16(MTP_RESPONSE_OK); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| value = sizeof(*status); |
| } |
| } |
| |
| /* respond with data transfer or status phase? */ |
| if (value >= 0) { |
| int rc; |
| cdev->req->zero = value < w_length; |
| cdev->req->length = value; |
| rc = usb_ep_queue(cdev->gadget->ep0, cdev->req, GFP_ATOMIC); |
| if (rc < 0) |
| ERROR(cdev, "%s setup response queue error\n", __func__); |
| } |
| |
| if (value == -EOPNOTSUPP) |
| VDBG(cdev, |
| "unknown class-specific control req " |
| "%02x.%02x v%04x i%04x l%u\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| w_value, w_index, w_length); |
| return value; |
| } |
| |
| static int mtp_function_set_alt(struct usb_function *f, |
| unsigned intf, unsigned alt) |
| { |
| struct mtp_dev *dev = func_to_dev(f); |
| struct usb_composite_dev *cdev = f->config->cdev; |
| int ret; |
| |
| DBG(cdev, "mtp_function_set_alt intf: %d alt: %d\n", intf, alt); |
| ret = usb_ep_enable(dev->ep_in, |
| ep_choose(cdev->gadget, |
| &mtp_highspeed_in_desc, |
| &mtp_fullspeed_in_desc)); |
| if (ret) |
| return ret; |
| ret = usb_ep_enable(dev->ep_out, |
| ep_choose(cdev->gadget, |
| &mtp_highspeed_out_desc, |
| &mtp_fullspeed_out_desc)); |
| if (ret) { |
| usb_ep_disable(dev->ep_in); |
| return ret; |
| } |
| ret = usb_ep_enable(dev->ep_intr, &mtp_intr_desc); |
| if (ret) { |
| usb_ep_disable(dev->ep_out); |
| usb_ep_disable(dev->ep_in); |
| return ret; |
| } |
| dev->state = STATE_READY; |
| |
| /* readers may be blocked waiting for us to go online */ |
| wake_up(&dev->read_wq); |
| return 0; |
| } |
| |
| static void mtp_function_disable(struct usb_function *f) |
| { |
| struct mtp_dev *dev = func_to_dev(f); |
| struct usb_composite_dev *cdev = dev->cdev; |
| |
| DBG(cdev, "mtp_function_disable\n"); |
| dev->state = STATE_OFFLINE; |
| usb_ep_disable(dev->ep_in); |
| usb_ep_disable(dev->ep_out); |
| usb_ep_disable(dev->ep_intr); |
| |
| /* readers may be blocked waiting for us to go online */ |
| wake_up(&dev->read_wq); |
| |
| VDBG(cdev, "%s disabled\n", dev->function.name); |
| } |
| |
| static int mtp_bind_config(struct usb_configuration *c) |
| { |
| struct mtp_dev *dev; |
| int ret = 0; |
| |
| printk(KERN_INFO "mtp_bind_config\n"); |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| /* allocate a string ID for our interface */ |
| if (mtp_string_defs[INTERFACE_STRING_INDEX].id == 0) { |
| ret = usb_string_id(c->cdev); |
| if (ret < 0) |
| return ret; |
| mtp_string_defs[INTERFACE_STRING_INDEX].id = ret; |
| mtp_interface_desc.iInterface = ret; |
| } |
| |
| spin_lock_init(&dev->lock); |
| init_waitqueue_head(&dev->read_wq); |
| init_waitqueue_head(&dev->write_wq); |
| atomic_set(&dev->open_excl, 0); |
| atomic_set(&dev->ioctl_excl, 0); |
| INIT_LIST_HEAD(&dev->tx_idle); |
| |
| dev->wq = create_singlethread_workqueue("f_mtp"); |
| if (!dev->wq) |
| goto err1; |
| INIT_WORK(&dev->send_file_work, send_file_work); |
| INIT_WORK(&dev->receive_file_work, receive_file_work); |
| |
| dev->cdev = c->cdev; |
| dev->function.name = "mtp"; |
| dev->function.strings = mtp_strings, |
| dev->function.descriptors = fs_mtp_descs; |
| dev->function.hs_descriptors = hs_mtp_descs; |
| dev->function.bind = mtp_function_bind; |
| dev->function.unbind = mtp_function_unbind; |
| dev->function.setup = mtp_function_setup; |
| dev->function.set_alt = mtp_function_set_alt; |
| dev->function.disable = mtp_function_disable; |
| |
| /* MTP mode by default */ |
| dev->interface_mode = MTP_INTERFACE_MODE_MTP; |
| |
| /* _mtp_dev must be set before calling usb_gadget_register_driver */ |
| _mtp_dev = dev; |
| |
| ret = misc_register(&mtp_device); |
| if (ret) |
| goto err1; |
| |
| ret = usb_add_function(c, &dev->function); |
| if (ret) |
| goto err2; |
| |
| return 0; |
| |
| err2: |
| misc_deregister(&mtp_device); |
| err1: |
| if (dev->wq) |
| destroy_workqueue(dev->wq); |
| kfree(dev); |
| printk(KERN_ERR "mtp gadget driver failed to initialize\n"); |
| return ret; |
| } |
| |
| static struct android_usb_function mtp_function = { |
| .name = "mtp", |
| .bind_config = mtp_bind_config, |
| }; |
| |
| static int __init init(void) |
| { |
| printk(KERN_INFO "f_mtp init\n"); |
| android_register_function(&mtp_function); |
| return 0; |
| } |
| module_init(init); |