| /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/uaccess.h> |
| #include <linux/slab.h> |
| #include <mach/qdsp5v2/audio_dev_ctl.h> |
| #include <mach/qdsp5v2/audio_interct.h> |
| #include <mach/qdsp5v2/mi2s.h> |
| #include <mach/qdsp5v2/afe.h> |
| #include <mach/debug_mm.h> |
| #include <mach/qdsp5v2/snddev_mi2s.h> |
| |
| /* Global state for the driver */ |
| struct snddev_mi2s_drv_state { |
| struct clk *mclk; |
| struct clk *sclk; |
| struct mutex lock; |
| u8 sd_lines_used; |
| u8 clocks_enabled; |
| }; |
| |
| static struct snddev_mi2s_drv_state snddev_mi2s_drv; |
| |
| static int snddev_mi2s_open_tx(struct msm_snddev_info *dev_info) |
| { |
| u8 channels; |
| struct msm_afe_config afe_config; |
| int rc; |
| struct snddev_mi2s_data *snddev_mi2s_data = dev_info->private_data; |
| |
| MM_DBG("%s: channel_mode = %u sd_line_mask = 0x%x " |
| "default_sample_rate = %u\n", __func__, |
| snddev_mi2s_data->channel_mode, snddev_mi2s_data->sd_lines, |
| snddev_mi2s_data->default_sample_rate); |
| |
| if (snddev_mi2s_data->channel_mode == 2) { |
| channels = MI2S_CHAN_STEREO; |
| } else { |
| MM_ERR("%s: Invalid number of channels = %u\n", __func__, |
| snddev_mi2s_data->channel_mode); |
| return -EINVAL; |
| } |
| |
| /* Set MI2S */ |
| mi2s_set_hdmi_input_path(channels, WT_16_BIT, |
| snddev_mi2s_data->sd_lines); |
| |
| afe_config.sample_rate = snddev_mi2s_data->default_sample_rate / 1000; |
| afe_config.channel_mode = snddev_mi2s_data->channel_mode; |
| afe_config.volume = AFE_VOLUME_UNITY; |
| rc = afe_enable(AFE_HW_PATH_MI2S_TX, &afe_config); |
| |
| if (IS_ERR_VALUE(rc)) { |
| MM_ERR("%s: afe_enable failed for AFE_HW_PATH_MI2S_TX " |
| "rc = %d\n", __func__, rc); |
| return -ENODEV; |
| } |
| |
| /* Enable audio path */ |
| if (snddev_mi2s_data->route) |
| snddev_mi2s_data->route(); |
| |
| return 0; |
| } |
| |
| static int snddev_mi2s_open_rx(struct msm_snddev_info *dev_info) |
| { |
| int rc; |
| struct msm_afe_config afe_config; |
| u8 channels; |
| struct snddev_mi2s_data *snddev_mi2s_data = dev_info->private_data; |
| |
| MM_DBG("%s: channel_mode = %u sd_line_mask = 0x%x " |
| "default_sample_rate = %u\n", __func__, |
| snddev_mi2s_data->channel_mode, snddev_mi2s_data->sd_lines, |
| snddev_mi2s_data->default_sample_rate); |
| |
| if (snddev_mi2s_data->channel_mode == 2) |
| channels = MI2S_CHAN_STEREO; |
| else if (snddev_mi2s_data->channel_mode == 4) |
| channels = MI2S_CHAN_4CHANNELS; |
| else if (snddev_mi2s_data->channel_mode == 6) |
| channels = MI2S_CHAN_6CHANNELS; |
| else if (snddev_mi2s_data->channel_mode == 8) |
| channels = MI2S_CHAN_8CHANNELS; |
| else |
| channels = MI2S_CHAN_MONO_RAW; |
| |
| /* Set MI2S */ |
| mi2s_set_hdmi_output_path(channels, WT_16_BIT, |
| snddev_mi2s_data->sd_lines); |
| |
| /* Start AFE */ |
| afe_config.sample_rate = snddev_mi2s_data->default_sample_rate / 1000; |
| afe_config.channel_mode = snddev_mi2s_data->channel_mode; |
| afe_config.volume = AFE_VOLUME_UNITY; |
| rc = afe_enable(AFE_HW_PATH_MI2S_RX, &afe_config); |
| |
| if (IS_ERR_VALUE(rc)) { |
| MM_ERR("%s: encounter error\n", __func__); |
| return -ENODEV; |
| } |
| |
| /* Enable audio path */ |
| if (snddev_mi2s_data->route) |
| snddev_mi2s_data->route(); |
| |
| MM_DBG("%s: enabled %s \n", __func__, snddev_mi2s_data->name); |
| |
| return 0; |
| } |
| |
| static int snddev_mi2s_open(struct msm_snddev_info *dev_info) |
| { |
| int rc = 0; |
| struct snddev_mi2s_drv_state *drv = &snddev_mi2s_drv; |
| u32 dir; |
| struct snddev_mi2s_data *snddev_mi2s_data = dev_info->private_data; |
| |
| if (!dev_info) { |
| MM_ERR("%s: msm_snddev_info is null \n", __func__); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&drv->lock); |
| |
| if (drv->sd_lines_used & snddev_mi2s_data->sd_lines) { |
| MM_ERR("%s: conflict in SD data line. can not use the device\n", |
| __func__); |
| mutex_unlock(&drv->lock); |
| return -EBUSY; |
| } |
| |
| if (!drv->clocks_enabled) { |
| |
| rc = mi2s_config_clk_gpio(); |
| if (rc) { |
| MM_ERR("%s: mi2s GPIO config failed for %s\n", |
| __func__, snddev_mi2s_data->name); |
| mutex_unlock(&drv->lock); |
| return -EIO; |
| } |
| clk_prepare_enable(drv->mclk); |
| clk_prepare_enable(drv->sclk); |
| drv->clocks_enabled = 1; |
| MM_DBG("%s: clks enabled\n", __func__); |
| } else |
| MM_DBG("%s: clks already enabled\n", __func__); |
| |
| if (snddev_mi2s_data->capability & SNDDEV_CAP_RX) { |
| |
| dir = DIR_RX; |
| rc = mi2s_config_data_gpio(dir, snddev_mi2s_data->sd_lines); |
| |
| if (rc) { |
| rc = -EIO; |
| MM_ERR("%s: mi2s GPIO config failed for %s\n", |
| __func__, snddev_mi2s_data->name); |
| goto mi2s_data_gpio_failure; |
| } |
| |
| MM_DBG("%s: done gpio config rx SD lines\n", __func__); |
| |
| rc = snddev_mi2s_open_rx(dev_info); |
| |
| if (IS_ERR_VALUE(rc)) { |
| MM_ERR(" snddev_mi2s_open_rx failed \n"); |
| goto mi2s_cleanup_open; |
| } |
| |
| drv->sd_lines_used |= snddev_mi2s_data->sd_lines; |
| |
| MM_DBG("%s: sd_lines_used = 0x%x\n", __func__, |
| drv->sd_lines_used); |
| mutex_unlock(&drv->lock); |
| |
| } else { |
| dir = DIR_TX; |
| rc = mi2s_config_data_gpio(dir, snddev_mi2s_data->sd_lines); |
| |
| if (rc) { |
| rc = -EIO; |
| MM_ERR("%s: mi2s GPIO config failed for %s\n", |
| __func__, snddev_mi2s_data->name); |
| goto mi2s_data_gpio_failure; |
| } |
| MM_DBG("%s: done data line gpio config for %s\n", |
| __func__, snddev_mi2s_data->name); |
| |
| rc = snddev_mi2s_open_tx(dev_info); |
| |
| if (IS_ERR_VALUE(rc)) { |
| MM_ERR(" snddev_mi2s_open_tx failed \n"); |
| goto mi2s_cleanup_open; |
| } |
| |
| drv->sd_lines_used |= snddev_mi2s_data->sd_lines; |
| MM_DBG("%s: sd_lines_used = 0x%x\n", __func__, |
| drv->sd_lines_used); |
| mutex_unlock(&drv->lock); |
| } |
| |
| return 0; |
| |
| mi2s_cleanup_open: |
| mi2s_unconfig_data_gpio(dir, snddev_mi2s_data->sd_lines); |
| |
| /* Disable audio path */ |
| if (snddev_mi2s_data->deroute) |
| snddev_mi2s_data->deroute(); |
| |
| mi2s_data_gpio_failure: |
| if (!drv->sd_lines_used) { |
| clk_disable_unprepare(drv->sclk); |
| clk_disable_unprepare(drv->mclk); |
| drv->clocks_enabled = 0; |
| mi2s_unconfig_clk_gpio(); |
| } |
| mutex_unlock(&drv->lock); |
| return rc; |
| } |
| |
| static int snddev_mi2s_close(struct msm_snddev_info *dev_info) |
| { |
| struct snddev_mi2s_drv_state *drv = &snddev_mi2s_drv; |
| int dir; |
| struct snddev_mi2s_data *snddev_mi2s_data = dev_info->private_data; |
| |
| if (!dev_info) { |
| MM_ERR("%s: msm_snddev_info is null \n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!dev_info->opened) { |
| MM_ERR(" %s: calling close device with out opening the" |
| " device \n", __func__); |
| return -EIO; |
| } |
| |
| mutex_lock(&drv->lock); |
| |
| drv->sd_lines_used &= ~snddev_mi2s_data->sd_lines; |
| |
| MM_DBG("%s: sd_lines in use = 0x%x\n", __func__, drv->sd_lines_used); |
| |
| if (snddev_mi2s_data->capability & SNDDEV_CAP_RX) { |
| dir = DIR_RX; |
| afe_disable(AFE_HW_PATH_MI2S_RX); |
| } else { |
| dir = DIR_TX; |
| afe_disable(AFE_HW_PATH_MI2S_TX); |
| } |
| |
| mi2s_unconfig_data_gpio(dir, snddev_mi2s_data->sd_lines); |
| |
| if (!drv->sd_lines_used) { |
| clk_disable_unprepare(drv->sclk); |
| clk_disable_unprepare(drv->mclk); |
| drv->clocks_enabled = 0; |
| mi2s_unconfig_clk_gpio(); |
| } |
| |
| /* Disable audio path */ |
| if (snddev_mi2s_data->deroute) |
| snddev_mi2s_data->deroute(); |
| |
| mutex_unlock(&drv->lock); |
| |
| return 0; |
| } |
| |
| static int snddev_mi2s_set_freq(struct msm_snddev_info *dev_info, u32 req_freq) |
| { |
| if (req_freq != 48000) { |
| MM_DBG("%s: Unsupported Frequency:%d\n", __func__, req_freq); |
| return -EINVAL; |
| } |
| return 48000; |
| } |
| |
| static int snddev_mi2s_probe(struct platform_device *pdev) |
| { |
| int rc = 0; |
| struct snddev_mi2s_data *pdata; |
| struct msm_snddev_info *dev_info; |
| |
| if (!pdev || !pdev->dev.platform_data) { |
| printk(KERN_ALERT "Invalid caller \n"); |
| return -ENODEV; |
| } |
| |
| pdata = pdev->dev.platform_data; |
| if ((pdata->capability & SNDDEV_CAP_RX) && |
| (pdata->capability & SNDDEV_CAP_TX)) { |
| MM_ERR("%s: invalid device data either RX or TX\n", __func__); |
| return -ENODEV; |
| } |
| |
| dev_info = kzalloc(sizeof(struct msm_snddev_info), GFP_KERNEL); |
| if (!dev_info) { |
| MM_ERR("%s: uneable to allocate memeory for msm_snddev_info \n", |
| __func__); |
| |
| return -ENOMEM; |
| } |
| |
| dev_info->name = pdata->name; |
| dev_info->copp_id = pdata->copp_id; |
| dev_info->acdb_id = pdata->acdb_id; |
| dev_info->private_data = (void *)pdata; |
| dev_info->dev_ops.open = snddev_mi2s_open; |
| dev_info->dev_ops.close = snddev_mi2s_close; |
| dev_info->dev_ops.set_freq = snddev_mi2s_set_freq; |
| dev_info->capability = pdata->capability; |
| dev_info->opened = 0; |
| msm_snddev_register(dev_info); |
| dev_info->sample_rate = pdata->default_sample_rate; |
| |
| MM_DBG("%s: probe done for %s\n", __func__, pdata->name); |
| return rc; |
| } |
| |
| static int snddev_mi2s_remove(struct platform_device *pdev) |
| { |
| return 0; |
| } |
| |
| static struct platform_driver snddev_mi2s_driver = { |
| .probe = snddev_mi2s_probe, |
| .remove = snddev_mi2s_remove, |
| .driver = {.name = "snddev_mi2s"} |
| }; |
| |
| static int __init snddev_mi2s_init(void) |
| { |
| s32 rc; |
| struct snddev_mi2s_drv_state *drv = &snddev_mi2s_drv; |
| |
| rc = platform_driver_register(&snddev_mi2s_driver); |
| if (IS_ERR_VALUE(rc)) { |
| |
| MM_ERR("%s: platform_driver_register failed \n", __func__); |
| goto error_platform_driver; |
| } |
| |
| drv->mclk = clk_get(NULL, "mi2s_m_clk"); |
| if (IS_ERR(drv->mclk)) { |
| MM_ERR("%s: clk_get mi2s_mclk failed \n", __func__); |
| goto error_mclk; |
| } |
| |
| drv->sclk = clk_get(NULL, "mi2s_s_clk"); |
| if (IS_ERR(drv->sclk)) { |
| MM_ERR("%s: clk_get mi2s_sclk failed \n", __func__); |
| |
| goto error_sclk; |
| } |
| |
| mutex_init(&drv->lock); |
| |
| MM_DBG("snddev_mi2s_init : done \n"); |
| |
| return 0; |
| |
| error_sclk: |
| clk_put(drv->mclk); |
| error_mclk: |
| platform_driver_unregister(&snddev_mi2s_driver); |
| error_platform_driver: |
| |
| MM_ERR("%s: encounter error\n", __func__); |
| return -ENODEV; |
| } |
| |
| static void __exit snddev_mi2s_exit(void) |
| { |
| struct snddev_mi2s_drv_state *drv = &snddev_mi2s_drv; |
| |
| platform_driver_unregister(&snddev_mi2s_driver); |
| |
| clk_put(drv->sclk); |
| clk_put(drv->mclk); |
| return; |
| } |
| |
| module_init(snddev_mi2s_init); |
| module_exit(snddev_mi2s_exit); |
| |
| MODULE_DESCRIPTION("mi2s Sound Device driver"); |
| MODULE_VERSION("1.0"); |
| MODULE_LICENSE("GPL v2"); |