| # |
| # CPU Frequency scaling |
| # |
| |
| menu "CPU Frequency scaling" |
| |
| source "drivers/cpufreq/Kconfig" |
| |
| if CPU_FREQ |
| |
| comment "CPUFreq processor drivers" |
| |
| config X86_ACPI_CPUFREQ |
| tristate "ACPI Processor P-States driver" |
| select CPU_FREQ_TABLE |
| depends on ACPI_PROCESSOR |
| help |
| This driver adds a CPUFreq driver which utilizes the ACPI |
| Processor Performance States. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config ELAN_CPUFREQ |
| tristate "AMD Elan SC400 and SC410" |
| select CPU_FREQ_TABLE |
| depends on X86_ELAN |
| ---help--- |
| This adds the CPUFreq driver for AMD Elan SC400 and SC410 |
| processors. |
| |
| You need to specify the processor maximum speed as boot |
| parameter: elanfreq=maxspeed (in kHz) or as module |
| parameter "max_freq". |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config SC520_CPUFREQ |
| tristate "AMD Elan SC520" |
| select CPU_FREQ_TABLE |
| depends on X86_ELAN |
| ---help--- |
| This adds the CPUFreq driver for AMD Elan SC520 processor. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| |
| config X86_POWERNOW_K6 |
| tristate "AMD Mobile K6-2/K6-3 PowerNow!" |
| select CPU_FREQ_TABLE |
| help |
| This adds the CPUFreq driver for mobile AMD K6-2+ and mobile |
| AMD K6-3+ processors. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_POWERNOW_K7 |
| tristate "AMD Mobile Athlon/Duron PowerNow!" |
| select CPU_FREQ_TABLE |
| help |
| This adds the CPUFreq driver for mobile AMD K7 mobile processors. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_POWERNOW_K7_ACPI |
| bool |
| depends on X86_POWERNOW_K7 && ACPI_PROCESSOR |
| depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m) |
| default y |
| |
| config X86_POWERNOW_K8 |
| tristate "AMD Opteron/Athlon64 PowerNow!" |
| select CPU_FREQ_TABLE |
| depends on EXPERIMENTAL |
| help |
| This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_POWERNOW_K8_ACPI |
| bool |
| depends on X86_POWERNOW_K8 && ACPI_PROCESSOR |
| depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) |
| default y |
| |
| config X86_GX_SUSPMOD |
| tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" |
| help |
| This add the CPUFreq driver for NatSemi Geode processors which |
| support suspend modulation. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_SPEEDSTEP_CENTRINO |
| tristate "Intel Enhanced SpeedStep" |
| select CPU_FREQ_TABLE |
| select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI) |
| help |
| This adds the CPUFreq driver for Enhanced SpeedStep enabled |
| mobile CPUs. This means Intel Pentium M (Centrino) CPUs. However, |
| you also need to say Y to "Use ACPI tables to decode..." below |
| [which might imply enabling ACPI] if you want to use this driver |
| on non-Banias CPUs. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_SPEEDSTEP_CENTRINO_ACPI |
| bool "Use ACPI tables to decode valid frequency/voltage pairs" |
| depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR |
| depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m) |
| default y |
| help |
| Use primarily the information provided in the BIOS ACPI tables |
| to determine valid CPU frequency and voltage pairings. It is |
| required for the driver to work on non-Banias CPUs. |
| |
| If in doubt, say Y. |
| |
| config X86_SPEEDSTEP_CENTRINO_TABLE |
| bool "Built-in tables for Banias CPUs" |
| depends on X86_SPEEDSTEP_CENTRINO |
| default y |
| help |
| Use built-in tables for Banias CPUs if ACPI encoding |
| is not available. |
| |
| If in doubt, say N. |
| |
| config X86_SPEEDSTEP_ICH |
| tristate "Intel Speedstep on ICH-M chipsets (ioport interface)" |
| select CPU_FREQ_TABLE |
| help |
| This adds the CPUFreq driver for certain mobile Intel Pentium III |
| (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all |
| mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, |
| ICH3 or ICH4 southbridge. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_SPEEDSTEP_SMI |
| tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)" |
| select CPU_FREQ_TABLE |
| depends on EXPERIMENTAL |
| help |
| This adds the CPUFreq driver for certain mobile Intel Pentium III |
| (Coppermine), all mobile Intel Pentium III-M (Tualatin) |
| on systems which have an Intel 440BX/ZX/MX southbridge. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_P4_CLOCKMOD |
| tristate "Intel Pentium 4 clock modulation" |
| select CPU_FREQ_TABLE |
| help |
| This adds the CPUFreq driver for Intel Pentium 4 / XEON |
| processors. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_CPUFREQ_NFORCE2 |
| tristate "nVidia nForce2 FSB changing" |
| depends on EXPERIMENTAL |
| help |
| This adds the CPUFreq driver for FSB changing on nVidia nForce2 |
| platforms. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_LONGRUN |
| tristate "Transmeta LongRun" |
| help |
| This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors |
| which support LongRun. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| config X86_LONGHAUL |
| tristate "VIA Cyrix III Longhaul" |
| select CPU_FREQ_TABLE |
| help |
| This adds the CPUFreq driver for VIA Samuel/CyrixIII, |
| VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T |
| processors. |
| |
| For details, take a look at <file:Documentation/cpu-freq/>. |
| |
| If in doubt, say N. |
| |
| comment "shared options" |
| |
| config X86_ACPI_CPUFREQ_PROC_INTF |
| bool "/proc/acpi/processor/../performance interface (deprecated)" |
| depends on PROC_FS |
| depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI |
| help |
| This enables the deprecated /proc/acpi/processor/../performance |
| interface. While it is helpful for debugging, the generic, |
| cross-architecture cpufreq interfaces should be used. |
| |
| If in doubt, say N. |
| |
| config X86_SPEEDSTEP_LIB |
| tristate |
| default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD |
| |
| config X86_SPEEDSTEP_RELAXED_CAP_CHECK |
| bool "Relaxed speedstep capability checks" |
| depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH) |
| help |
| Don't perform all checks for a speedstep capable system which would |
| normally be done. Some ancient or strange systems, though speedstep |
| capable, don't always indicate that they are speedstep capable. This |
| option lets the probing code bypass some of those checks if the |
| parameter "relaxed_check=1" is passed to the module. |
| |
| endif # CPU_FREQ |
| |
| endmenu |