| /* Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| |
| #include <linux/msm_adc.h> |
| |
| #define KELVINMIL_DEGMIL 273160 |
| |
| static const struct adc_map_pt adcmap_batttherm[] = { |
| {2020, -30}, |
| {1923, -20}, |
| {1796, -10}, |
| {1640, 0}, |
| {1459, 10}, |
| {1260, 20}, |
| {1159, 25}, |
| {1059, 30}, |
| {871, 40}, |
| {706, 50}, |
| {567, 60}, |
| {453, 70}, |
| {364, 80} |
| }; |
| |
| static const struct adc_map_pt adcmap_msmtherm[] = { |
| {2150, -30}, |
| {2107, -20}, |
| {2037, -10}, |
| {1929, 0}, |
| {1776, 10}, |
| {1579, 20}, |
| {1467, 25}, |
| {1349, 30}, |
| {1108, 40}, |
| {878, 50}, |
| {677, 60}, |
| {513, 70}, |
| {385, 80}, |
| {287, 90}, |
| {215, 100}, |
| {186, 110}, |
| {107, 120} |
| }; |
| |
| static const struct adc_map_pt adcmap_ntcg104ef104fb[] = { |
| {696483, -40960}, |
| {649148, -39936}, |
| {605368, -38912}, |
| {564809, -37888}, |
| {527215, -36864}, |
| {492322, -35840}, |
| {460007, -34816}, |
| {429982, -33792}, |
| {402099, -32768}, |
| {376192, -31744}, |
| {352075, -30720}, |
| {329714, -29696}, |
| {308876, -28672}, |
| {289480, -27648}, |
| {271417, -26624}, |
| {254574, -25600}, |
| {238903, -24576}, |
| {224276, -23552}, |
| {210631, -22528}, |
| {197896, -21504}, |
| {186007, -20480}, |
| {174899, -19456}, |
| {164521, -18432}, |
| {154818, -17408}, |
| {145744, -16384}, |
| {137265, -15360}, |
| {129307, -14336}, |
| {121866, -13312}, |
| {114896, -12288}, |
| {108365, -11264}, |
| {102252, -10240}, |
| {96499, -9216}, |
| {91111, -8192}, |
| {86055, -7168}, |
| {81308, -6144}, |
| {76857, -5120}, |
| {72660, -4096}, |
| {68722, -3072}, |
| {65020, -2048}, |
| {61538, -1024}, |
| {58261, 0}, |
| {55177, 1024}, |
| {52274, 2048}, |
| {49538, 3072}, |
| {46962, 4096}, |
| {44531, 5120}, |
| {42243, 6144}, |
| {40083, 7168}, |
| {38045, 8192}, |
| {36122, 9216}, |
| {34308, 10240}, |
| {32592, 11264}, |
| {30972, 12288}, |
| {29442, 13312}, |
| {27995, 14336}, |
| {26624, 15360}, |
| {25333, 16384}, |
| {24109, 17408}, |
| {22951, 18432}, |
| {21854, 19456}, |
| {20807, 20480}, |
| {19831, 21504}, |
| {18899, 22528}, |
| {18016, 23552}, |
| {17178, 24576}, |
| {16384, 25600}, |
| {15631, 26624}, |
| {14916, 27648}, |
| {14237, 28672}, |
| {13593, 29696}, |
| {12976, 30720}, |
| {12400, 31744}, |
| {11848, 32768}, |
| {11324, 33792}, |
| {10825, 34816}, |
| {10354, 35840}, |
| {9900, 36864}, |
| {9471, 37888}, |
| {9062, 38912}, |
| {8674, 39936}, |
| {8306, 40960}, |
| {7951, 41984}, |
| {7616, 43008}, |
| {7296, 44032}, |
| {6991, 45056}, |
| {6701, 46080}, |
| {6424, 47104}, |
| {6160, 48128}, |
| {5908, 49152}, |
| {5667, 50176}, |
| {5439, 51200}, |
| {5219, 52224}, |
| {5010, 53248}, |
| {4810, 54272}, |
| {4619, 55296}, |
| {4440, 56320}, |
| {4263, 57344}, |
| {4097, 58368}, |
| {3938, 59392}, |
| {3785, 60416}, |
| {3637, 61440}, |
| {3501, 62464}, |
| {3368, 63488}, |
| {3240, 64512}, |
| {3118, 65536}, |
| {2998, 66560}, |
| {2889, 67584}, |
| {2782, 68608}, |
| {2680, 69632}, |
| {2581, 70656}, |
| {2490, 71680}, |
| {2397, 72704}, |
| {2310, 73728}, |
| {2227, 74752}, |
| {2147, 75776}, |
| {2064, 76800}, |
| {1998, 77824}, |
| {1927, 78848}, |
| {1860, 79872}, |
| {1795, 80896}, |
| {1736, 81920}, |
| {1673, 82944}, |
| {1615, 83968}, |
| {1560, 84992}, |
| {1507, 86016}, |
| {1456, 87040}, |
| {1407, 88064}, |
| {1360, 89088}, |
| {1314, 90112}, |
| {1271, 91136}, |
| {1228, 92160}, |
| {1189, 93184}, |
| {1150, 94208}, |
| {1112, 95232}, |
| {1076, 96256}, |
| {1042, 97280}, |
| {1008, 98304}, |
| {976, 99328}, |
| {945, 100352}, |
| {915, 101376}, |
| {886, 102400}, |
| {859, 103424}, |
| {832, 104448}, |
| {807, 105472}, |
| {782, 106496}, |
| {756, 107520}, |
| {735, 108544}, |
| {712, 109568}, |
| {691, 110592}, |
| {670, 111616}, |
| {650, 112640}, |
| {631, 113664}, |
| {612, 114688}, |
| {594, 115712}, |
| {577, 116736}, |
| {560, 117760}, |
| {544, 118784}, |
| {528, 119808}, |
| {513, 120832}, |
| {498, 121856}, |
| {483, 122880}, |
| {470, 123904}, |
| {457, 124928}, |
| {444, 125952}, |
| {431, 126976}, |
| {419, 128000} |
| }; |
| |
| static int32_t |
| adc_map_linear(const struct adc_map_pt *pts, |
| uint32_t tablesize, int32_t input, int64_t *output) |
| { |
| bool descending = 1; |
| uint32_t i = 0; |
| |
| if ((pts == NULL) || (output == NULL)) |
| return -EINVAL; |
| |
| /* Check if table is descending or ascending */ |
| if (tablesize > 1) { |
| if (pts[0].x < pts[1].x) |
| descending = 0; |
| } |
| |
| while (i < tablesize) { |
| if ((descending == 1) && (pts[i].x < input)) { |
| /* table entry is less than measured |
| value and table is descending, stop */ |
| break; |
| } else if ((descending == 0) && |
| (pts[i].x > input)) { |
| /* table entry is greater than measured |
| value and table is ascending, stop */ |
| break; |
| } else |
| i++; |
| } |
| |
| if (i == 0) |
| *output = pts[0].y; |
| else if (i == tablesize) |
| *output = pts[tablesize-1].y; |
| else { |
| /* result is between search_index and search_index-1 */ |
| /* interpolate linearly */ |
| *output = (((int32_t) ((pts[i].y - pts[i-1].y)* |
| (input - pts[i-1].x))/ |
| (pts[i].x - pts[i-1].x))+ |
| pts[i-1].y); |
| } |
| |
| return 0; |
| } |
| |
| int32_t scale_default(int32_t adc_code, |
| const struct adc_properties *adc_properties, |
| const struct chan_properties *chan_properties, |
| struct adc_chan_result *adc_chan_result) |
| { |
| bool negative_rawfromoffset = 0; |
| int32_t rawfromoffset = adc_code - chan_properties->adc_graph->offset; |
| |
| if (!chan_properties->gain_numerator || |
| !chan_properties->gain_denominator) |
| return -EINVAL; |
| |
| adc_chan_result->adc_code = adc_code; |
| if (rawfromoffset < 0) { |
| if (adc_properties->bipolar) { |
| rawfromoffset = (rawfromoffset ^ -1) + 1; |
| negative_rawfromoffset = 1; |
| } else |
| rawfromoffset = 0; |
| } |
| |
| if (rawfromoffset >= 1 << adc_properties->bitresolution) |
| rawfromoffset = (1 << adc_properties->bitresolution) - 1; |
| |
| adc_chan_result->measurement = (int64_t)rawfromoffset* |
| chan_properties->adc_graph->dx* |
| chan_properties->gain_denominator; |
| |
| /* do_div only perform positive integer division! */ |
| do_div(adc_chan_result->measurement, chan_properties->adc_graph->dy* |
| chan_properties->gain_numerator); |
| |
| if (negative_rawfromoffset) |
| adc_chan_result->measurement = |
| (adc_chan_result->measurement ^ -1) + 1; |
| |
| /* Note: adc_chan_result->measurement is in the unit of |
| * adc_properties.adc_reference. For generic channel processing, |
| * channel measurement is a scale/ratio relative to the adc |
| * reference input */ |
| adc_chan_result->physical = (int32_t) adc_chan_result->measurement; |
| |
| return 0; |
| } |
| |
| int32_t scale_batt_therm(int32_t adc_code, |
| const struct adc_properties *adc_properties, |
| const struct chan_properties *chan_properties, |
| struct adc_chan_result *adc_chan_result) |
| { |
| scale_default(adc_code, adc_properties, chan_properties, |
| adc_chan_result); |
| /* convert mV ---> degC using the table */ |
| return adc_map_linear( |
| adcmap_batttherm, |
| sizeof(adcmap_batttherm)/sizeof(adcmap_batttherm[0]), |
| adc_chan_result->physical, |
| &adc_chan_result->physical); |
| } |
| |
| int32_t scale_msm_therm(int32_t adc_code, |
| const struct adc_properties *adc_properties, |
| const struct chan_properties *chan_properties, |
| struct adc_chan_result *adc_chan_result) |
| { |
| scale_default(adc_code, adc_properties, chan_properties, |
| adc_chan_result); |
| /* convert mV ---> degC using the table */ |
| return adc_map_linear( |
| adcmap_msmtherm, |
| sizeof(adcmap_msmtherm)/sizeof(adcmap_msmtherm[0]), |
| adc_chan_result->physical, |
| &adc_chan_result->physical); |
| } |
| |
| int32_t scale_pmic_therm(int32_t adc_code, |
| const struct adc_properties *adc_properties, |
| const struct chan_properties *chan_properties, |
| struct adc_chan_result *adc_chan_result) |
| { |
| /* 2mV/K */ |
| int32_t rawfromoffset = adc_code - chan_properties->adc_graph->offset; |
| |
| if (!chan_properties->gain_numerator || |
| !chan_properties->gain_denominator) |
| return -EINVAL; |
| |
| adc_chan_result->adc_code = adc_code; |
| if (rawfromoffset > 0) { |
| if (rawfromoffset >= 1 << adc_properties->bitresolution) |
| rawfromoffset = (1 << adc_properties->bitresolution) |
| - 1; |
| adc_chan_result->measurement = (int64_t)rawfromoffset* |
| chan_properties->adc_graph->dx* |
| chan_properties->gain_denominator*1000; |
| do_div(adc_chan_result->measurement, |
| chan_properties->adc_graph->dy* |
| chan_properties->gain_numerator*2); |
| } else { |
| adc_chan_result->measurement = 0; |
| } |
| /* Note: adc_chan_result->measurement is in the unit of |
| adc_properties.adc_reference */ |
| adc_chan_result->physical = (int32_t)adc_chan_result->measurement; |
| /* Change to .001 deg C */ |
| adc_chan_result->physical -= KELVINMIL_DEGMIL; |
| adc_chan_result->measurement <<= 1; |
| |
| return 0; |
| } |
| |
| /* Scales the ADC code to 0.001 degrees C using the map |
| * table for the XO thermistor. |
| */ |
| int32_t tdkntcgtherm(int32_t adc_code, |
| const struct adc_properties *adc_properties, |
| const struct chan_properties *chan_properties, |
| struct adc_chan_result *adc_chan_result) |
| { |
| int32_t offset = chan_properties->adc_graph->offset, |
| dy = chan_properties->adc_graph->dy, |
| dx = chan_properties->adc_graph->dx, |
| fullscale_calibrated_adc_code; |
| |
| uint32_t rt_r25; |
| uint32_t num1, num2, denom; |
| |
| adc_chan_result->adc_code = adc_code; |
| fullscale_calibrated_adc_code = dy + offset; |
| /* The above is a short cut in math that would reduce a lot of |
| computation whereas the below expression |
| (adc_properties->adc_reference*dy+dx*offset+(dx>>1))/dx |
| is a more generic formula when the 2 reference voltages are |
| different than 0 and full scale voltage. */ |
| |
| if ((dy == 0) || (dx == 0) || |
| (offset >= fullscale_calibrated_adc_code)) { |
| return -EINVAL; |
| } else { |
| if (adc_code >= fullscale_calibrated_adc_code) { |
| rt_r25 = (uint32_t)-1; |
| } else if (adc_code <= offset) { |
| rt_r25 = 0; |
| } else { |
| /* The formula used is (adc_code of current reading - offset)/ |
| * (the calibrated fullscale adc code - adc_code of current reading). |
| * For this channel, at this time, chan_properties->gain_numerator = |
| * chan_properties->gain_denominator = 1, so no need to incorporate |
| * into the formula even though we could and multiply/divide by 1 |
| * which yields the same result but expensive on computation. */ |
| num1 = (adc_code - offset) << 14; |
| num2 = (fullscale_calibrated_adc_code - adc_code) >> 1; |
| denom = fullscale_calibrated_adc_code - adc_code; |
| |
| if ((int)denom <= 0) |
| rt_r25 = 0x7FFFFFFF; |
| else |
| rt_r25 = (num1 + num2) / denom; |
| } |
| |
| if (rt_r25 > 0x7FFFFFFF) |
| rt_r25 = 0x7FFFFFFF; |
| |
| adc_map_linear(adcmap_ntcg104ef104fb, |
| sizeof(adcmap_ntcg104ef104fb)/sizeof(adcmap_ntcg104ef104fb[0]), |
| (int32_t)rt_r25, &adc_chan_result->physical); |
| } |
| |
| return 0; |
| } |
| |
| int32_t scale_xtern_chgr_cur(int32_t adc_code, |
| const struct adc_properties *adc_properties, |
| const struct chan_properties *chan_properties, |
| struct adc_chan_result *adc_chan_result) |
| { |
| int32_t rawfromoffset = adc_code - chan_properties->adc_graph->offset; |
| |
| if (!chan_properties->gain_numerator || |
| !chan_properties->gain_denominator) |
| return -EINVAL; |
| |
| adc_chan_result->adc_code = adc_code; |
| if (rawfromoffset > 0) { |
| if (rawfromoffset >= 1 << adc_properties->bitresolution) |
| rawfromoffset = (1 << adc_properties->bitresolution) |
| - 1; |
| adc_chan_result->measurement = ((int64_t)rawfromoffset * 5)* |
| chan_properties->adc_graph->dx* |
| chan_properties->gain_denominator; |
| do_div(adc_chan_result->measurement, |
| chan_properties->adc_graph->dy* |
| chan_properties->gain_numerator); |
| } else { |
| adc_chan_result->measurement = 0; |
| } |
| adc_chan_result->physical = (int32_t) adc_chan_result->measurement; |
| |
| return 0; |
| } |