| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_device.h> |
| #include <linux/errno.h> |
| #include <linux/mfd/pm8xxx/pm8921-charger.h> |
| #include <linux/mfd/pm8xxx/pm8921-bms.h> |
| #include <linux/mfd/pm8xxx/pm8xxx-adc.h> |
| #include <linux/mfd/pm8xxx/ccadc.h> |
| #include <linux/mfd/pm8xxx/core.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/bitops.h> |
| #include <linux/workqueue.h> |
| #include <linux/debugfs.h> |
| #include <linux/slab.h> |
| |
| #include <mach/msm_xo.h> |
| #include <mach/msm_hsusb.h> |
| |
| #define CHG_BUCK_CLOCK_CTRL 0x14 |
| #define CHG_BUCK_CLOCK_CTRL_8038 0xD |
| |
| #define PBL_ACCESS1 0x04 |
| #define PBL_ACCESS2 0x05 |
| #define SYS_CONFIG_1 0x06 |
| #define SYS_CONFIG_2 0x07 |
| #define CHG_CNTRL 0x204 |
| #define CHG_IBAT_MAX 0x205 |
| #define CHG_TEST 0x206 |
| #define CHG_BUCK_CTRL_TEST1 0x207 |
| #define CHG_BUCK_CTRL_TEST2 0x208 |
| #define CHG_BUCK_CTRL_TEST3 0x209 |
| #define COMPARATOR_OVERRIDE 0x20A |
| #define PSI_TXRX_SAMPLE_DATA_0 0x20B |
| #define PSI_TXRX_SAMPLE_DATA_1 0x20C |
| #define PSI_TXRX_SAMPLE_DATA_2 0x20D |
| #define PSI_TXRX_SAMPLE_DATA_3 0x20E |
| #define PSI_CONFIG_STATUS 0x20F |
| #define CHG_IBAT_SAFE 0x210 |
| #define CHG_ITRICKLE 0x211 |
| #define CHG_CNTRL_2 0x212 |
| #define CHG_VBAT_DET 0x213 |
| #define CHG_VTRICKLE 0x214 |
| #define CHG_ITERM 0x215 |
| #define CHG_CNTRL_3 0x216 |
| #define CHG_VIN_MIN 0x217 |
| #define CHG_TWDOG 0x218 |
| #define CHG_TTRKL_MAX 0x219 |
| #define CHG_TEMP_THRESH 0x21A |
| #define CHG_TCHG_MAX 0x21B |
| #define USB_OVP_CONTROL 0x21C |
| #define DC_OVP_CONTROL 0x21D |
| #define USB_OVP_TEST 0x21E |
| #define DC_OVP_TEST 0x21F |
| #define CHG_VDD_MAX 0x220 |
| #define CHG_VDD_SAFE 0x221 |
| #define CHG_VBAT_BOOT_THRESH 0x222 |
| #define USB_OVP_TRIM 0x355 |
| #define BUCK_CONTROL_TRIM1 0x356 |
| #define BUCK_CONTROL_TRIM2 0x357 |
| #define BUCK_CONTROL_TRIM3 0x358 |
| #define BUCK_CONTROL_TRIM4 0x359 |
| #define CHG_DEFAULTS_TRIM 0x35A |
| #define CHG_ITRIM 0x35B |
| #define CHG_TTRIM 0x35C |
| #define CHG_COMP_OVR 0x20A |
| #define IUSB_FINE_RES 0x2B6 |
| #define OVP_USB_UVD 0x2B7 |
| |
| /* check EOC every 10 seconds */ |
| #define EOC_CHECK_PERIOD_MS 10000 |
| /* check for USB unplug every 200 msecs */ |
| #define UNPLUG_CHECK_WAIT_PERIOD_MS 200 |
| |
| enum chg_fsm_state { |
| FSM_STATE_OFF_0 = 0, |
| FSM_STATE_BATFETDET_START_12 = 12, |
| FSM_STATE_BATFETDET_END_16 = 16, |
| FSM_STATE_ON_CHG_HIGHI_1 = 1, |
| FSM_STATE_ATC_2A = 2, |
| FSM_STATE_ATC_2B = 18, |
| FSM_STATE_ON_BAT_3 = 3, |
| FSM_STATE_ATC_FAIL_4 = 4 , |
| FSM_STATE_DELAY_5 = 5, |
| FSM_STATE_ON_CHG_AND_BAT_6 = 6, |
| FSM_STATE_FAST_CHG_7 = 7, |
| FSM_STATE_TRKL_CHG_8 = 8, |
| FSM_STATE_CHG_FAIL_9 = 9, |
| FSM_STATE_EOC_10 = 10, |
| FSM_STATE_ON_CHG_VREGOK_11 = 11, |
| FSM_STATE_ATC_PAUSE_13 = 13, |
| FSM_STATE_FAST_CHG_PAUSE_14 = 14, |
| FSM_STATE_TRKL_CHG_PAUSE_15 = 15, |
| FSM_STATE_START_BOOT = 20, |
| FSM_STATE_FLCB_VREGOK = 21, |
| FSM_STATE_FLCB = 22, |
| }; |
| |
| struct fsm_state_to_batt_status { |
| enum chg_fsm_state fsm_state; |
| int batt_state; |
| }; |
| |
| static struct fsm_state_to_batt_status map[] = { |
| {FSM_STATE_OFF_0, POWER_SUPPLY_STATUS_UNKNOWN}, |
| {FSM_STATE_BATFETDET_START_12, POWER_SUPPLY_STATUS_UNKNOWN}, |
| {FSM_STATE_BATFETDET_END_16, POWER_SUPPLY_STATUS_UNKNOWN}, |
| /* |
| * for CHG_HIGHI_1 report NOT_CHARGING if battery missing, |
| * too hot/cold, charger too hot |
| */ |
| {FSM_STATE_ON_CHG_HIGHI_1, POWER_SUPPLY_STATUS_FULL}, |
| {FSM_STATE_ATC_2A, POWER_SUPPLY_STATUS_CHARGING}, |
| {FSM_STATE_ATC_2B, POWER_SUPPLY_STATUS_CHARGING}, |
| {FSM_STATE_ON_BAT_3, POWER_SUPPLY_STATUS_DISCHARGING}, |
| {FSM_STATE_ATC_FAIL_4, POWER_SUPPLY_STATUS_DISCHARGING}, |
| {FSM_STATE_DELAY_5, POWER_SUPPLY_STATUS_UNKNOWN }, |
| {FSM_STATE_ON_CHG_AND_BAT_6, POWER_SUPPLY_STATUS_CHARGING}, |
| {FSM_STATE_FAST_CHG_7, POWER_SUPPLY_STATUS_CHARGING}, |
| {FSM_STATE_TRKL_CHG_8, POWER_SUPPLY_STATUS_CHARGING}, |
| {FSM_STATE_CHG_FAIL_9, POWER_SUPPLY_STATUS_DISCHARGING}, |
| {FSM_STATE_EOC_10, POWER_SUPPLY_STATUS_FULL}, |
| {FSM_STATE_ON_CHG_VREGOK_11, POWER_SUPPLY_STATUS_NOT_CHARGING}, |
| {FSM_STATE_ATC_PAUSE_13, POWER_SUPPLY_STATUS_NOT_CHARGING}, |
| {FSM_STATE_FAST_CHG_PAUSE_14, POWER_SUPPLY_STATUS_NOT_CHARGING}, |
| {FSM_STATE_TRKL_CHG_PAUSE_15, POWER_SUPPLY_STATUS_NOT_CHARGING}, |
| {FSM_STATE_START_BOOT, POWER_SUPPLY_STATUS_NOT_CHARGING}, |
| {FSM_STATE_FLCB_VREGOK, POWER_SUPPLY_STATUS_NOT_CHARGING}, |
| {FSM_STATE_FLCB, POWER_SUPPLY_STATUS_NOT_CHARGING}, |
| }; |
| |
| enum chg_regulation_loop { |
| VDD_LOOP = BIT(3), |
| BAT_CURRENT_LOOP = BIT(2), |
| INPUT_CURRENT_LOOP = BIT(1), |
| INPUT_VOLTAGE_LOOP = BIT(0), |
| CHG_ALL_LOOPS = VDD_LOOP | BAT_CURRENT_LOOP |
| | INPUT_CURRENT_LOOP | INPUT_VOLTAGE_LOOP, |
| }; |
| |
| enum pmic_chg_interrupts { |
| USBIN_VALID_IRQ = 0, |
| USBIN_OV_IRQ, |
| BATT_INSERTED_IRQ, |
| VBATDET_LOW_IRQ, |
| USBIN_UV_IRQ, |
| VBAT_OV_IRQ, |
| CHGWDOG_IRQ, |
| VCP_IRQ, |
| ATCDONE_IRQ, |
| ATCFAIL_IRQ, |
| CHGDONE_IRQ, |
| CHGFAIL_IRQ, |
| CHGSTATE_IRQ, |
| LOOP_CHANGE_IRQ, |
| FASTCHG_IRQ, |
| TRKLCHG_IRQ, |
| BATT_REMOVED_IRQ, |
| BATTTEMP_HOT_IRQ, |
| CHGHOT_IRQ, |
| BATTTEMP_COLD_IRQ, |
| CHG_GONE_IRQ, |
| BAT_TEMP_OK_IRQ, |
| COARSE_DET_LOW_IRQ, |
| VDD_LOOP_IRQ, |
| VREG_OV_IRQ, |
| VBATDET_IRQ, |
| BATFET_IRQ, |
| PSI_IRQ, |
| DCIN_VALID_IRQ, |
| DCIN_OV_IRQ, |
| DCIN_UV_IRQ, |
| PM_CHG_MAX_INTS, |
| }; |
| |
| struct bms_notify { |
| int is_battery_full; |
| int is_charging; |
| struct work_struct work; |
| }; |
| |
| /** |
| * struct pm8921_chg_chip -device information |
| * @dev: device pointer to access the parent |
| * @usb_present: present status of usb |
| * @dc_present: present status of dc |
| * @usb_charger_current: usb current to charge the battery with used when |
| * the usb path is enabled or charging is resumed |
| * @safety_time: max time for which charging will happen |
| * @update_time: how frequently the userland needs to be updated |
| * @max_voltage_mv: the max volts the batt should be charged up to |
| * @min_voltage_mv: the min battery voltage before turning the FETon |
| * @uvd_voltage_mv: (PM8917 only) the falling UVD threshold voltage |
| * @cool_temp_dc: the cool temp threshold in deciCelcius |
| * @warm_temp_dc: the warm temp threshold in deciCelcius |
| * @resume_voltage_delta: the voltage delta from vdd max at which the |
| * battery should resume charging |
| * @term_current: The charging based term current |
| * |
| */ |
| struct pm8921_chg_chip { |
| struct device *dev; |
| unsigned int usb_present; |
| unsigned int dc_present; |
| unsigned int usb_charger_current; |
| unsigned int max_bat_chg_current; |
| unsigned int pmic_chg_irq[PM_CHG_MAX_INTS]; |
| unsigned int safety_time; |
| unsigned int ttrkl_time; |
| unsigned int update_time; |
| unsigned int max_voltage_mv; |
| unsigned int min_voltage_mv; |
| unsigned int uvd_voltage_mv; |
| int cool_temp_dc; |
| int warm_temp_dc; |
| unsigned int temp_check_period; |
| unsigned int cool_bat_chg_current; |
| unsigned int warm_bat_chg_current; |
| unsigned int cool_bat_voltage; |
| unsigned int warm_bat_voltage; |
| unsigned int is_bat_cool; |
| unsigned int is_bat_warm; |
| unsigned int resume_voltage_delta; |
| unsigned int term_current; |
| unsigned int vbat_channel; |
| unsigned int batt_temp_channel; |
| unsigned int batt_id_channel; |
| struct power_supply usb_psy; |
| struct power_supply dc_psy; |
| struct power_supply *ext_psy; |
| struct power_supply batt_psy; |
| struct dentry *dent; |
| struct bms_notify bms_notify; |
| bool keep_btm_on_suspend; |
| bool ext_charging; |
| bool ext_charge_done; |
| bool iusb_fine_res; |
| bool dc_unplug_check; |
| DECLARE_BITMAP(enabled_irqs, PM_CHG_MAX_INTS); |
| struct work_struct battery_id_valid_work; |
| int64_t batt_id_min; |
| int64_t batt_id_max; |
| int trkl_voltage; |
| int weak_voltage; |
| int trkl_current; |
| int weak_current; |
| int vin_min; |
| unsigned int *thermal_mitigation; |
| int thermal_levels; |
| struct delayed_work update_heartbeat_work; |
| struct delayed_work eoc_work; |
| struct delayed_work unplug_check_work; |
| struct delayed_work vin_collapse_check_work; |
| struct wake_lock eoc_wake_lock; |
| enum pm8921_chg_cold_thr cold_thr; |
| enum pm8921_chg_hot_thr hot_thr; |
| int rconn_mohm; |
| enum pm8921_chg_led_src_config led_src_config; |
| bool host_mode; |
| bool has_dc_supply; |
| u8 active_path; |
| int recent_reported_soc; |
| }; |
| |
| /* user space parameter to limit usb current */ |
| static unsigned int usb_max_current; |
| /* |
| * usb_target_ma is used for wall charger |
| * adaptive input current limiting only. Use |
| * pm_iusbmax_get() to get current maximum usb current setting. |
| */ |
| static int usb_target_ma; |
| static int charging_disabled; |
| static int thermal_mitigation; |
| |
| static struct pm8921_chg_chip *the_chip; |
| |
| static struct pm8xxx_adc_arb_btm_param btm_config; |
| |
| static int pm_chg_masked_write(struct pm8921_chg_chip *chip, u16 addr, |
| u8 mask, u8 val) |
| { |
| int rc; |
| u8 reg; |
| |
| rc = pm8xxx_readb(chip->dev->parent, addr, ®); |
| if (rc) { |
| pr_err("pm8xxx_readb failed: addr=%03X, rc=%d\n", addr, rc); |
| return rc; |
| } |
| reg &= ~mask; |
| reg |= val & mask; |
| rc = pm8xxx_writeb(chip->dev->parent, addr, reg); |
| if (rc) { |
| pr_err("pm8xxx_writeb failed: addr=%03X, rc=%d\n", addr, rc); |
| return rc; |
| } |
| return 0; |
| } |
| |
| static int pm_chg_get_rt_status(struct pm8921_chg_chip *chip, int irq_id) |
| { |
| return pm8xxx_read_irq_stat(chip->dev->parent, |
| chip->pmic_chg_irq[irq_id]); |
| } |
| |
| /* Treat OverVoltage/UnderVoltage as source missing */ |
| static int is_usb_chg_plugged_in(struct pm8921_chg_chip *chip) |
| { |
| return pm_chg_get_rt_status(chip, USBIN_VALID_IRQ); |
| } |
| |
| /* Treat OverVoltage/UnderVoltage as source missing */ |
| static int is_dc_chg_plugged_in(struct pm8921_chg_chip *chip) |
| { |
| return pm_chg_get_rt_status(chip, DCIN_VALID_IRQ); |
| } |
| |
| static int is_batfet_closed(struct pm8921_chg_chip *chip) |
| { |
| return pm_chg_get_rt_status(chip, BATFET_IRQ); |
| } |
| #define CAPTURE_FSM_STATE_CMD 0xC2 |
| #define READ_BANK_7 0x70 |
| #define READ_BANK_4 0x40 |
| static int pm_chg_get_fsm_state(struct pm8921_chg_chip *chip) |
| { |
| u8 temp; |
| int err, ret = 0; |
| |
| temp = CAPTURE_FSM_STATE_CMD; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return err; |
| } |
| |
| temp = READ_BANK_7; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return err; |
| } |
| |
| err = pm8xxx_readb(chip->dev->parent, CHG_TEST, &temp); |
| if (err) { |
| pr_err("pm8xxx_readb fail: addr=%03X, rc=%d\n", CHG_TEST, err); |
| return err; |
| } |
| /* get the lower 4 bits */ |
| ret = temp & 0xF; |
| |
| temp = READ_BANK_4; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return err; |
| } |
| |
| err = pm8xxx_readb(chip->dev->parent, CHG_TEST, &temp); |
| if (err) { |
| pr_err("pm8xxx_readb fail: addr=%03X, rc=%d\n", CHG_TEST, err); |
| return err; |
| } |
| /* get the upper 1 bit */ |
| ret |= (temp & 0x1) << 4; |
| return ret; |
| } |
| |
| #define READ_BANK_6 0x60 |
| static int pm_chg_get_regulation_loop(struct pm8921_chg_chip *chip) |
| { |
| u8 temp; |
| int err; |
| |
| temp = READ_BANK_6; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return err; |
| } |
| |
| err = pm8xxx_readb(chip->dev->parent, CHG_TEST, &temp); |
| if (err) { |
| pr_err("pm8xxx_readb fail: addr=%03X, rc=%d\n", CHG_TEST, err); |
| return err; |
| } |
| |
| /* return the lower 4 bits */ |
| return temp & CHG_ALL_LOOPS; |
| } |
| |
| #define CHG_USB_SUSPEND_BIT BIT(2) |
| static int pm_chg_usb_suspend_enable(struct pm8921_chg_chip *chip, int enable) |
| { |
| return pm_chg_masked_write(chip, CHG_CNTRL_3, CHG_USB_SUSPEND_BIT, |
| enable ? CHG_USB_SUSPEND_BIT : 0); |
| } |
| |
| #define CHG_EN_BIT BIT(7) |
| static int pm_chg_auto_enable(struct pm8921_chg_chip *chip, int enable) |
| { |
| return pm_chg_masked_write(chip, CHG_CNTRL_3, CHG_EN_BIT, |
| enable ? CHG_EN_BIT : 0); |
| } |
| |
| #define CHG_FAILED_CLEAR BIT(0) |
| #define ATC_FAILED_CLEAR BIT(1) |
| static int pm_chg_failed_clear(struct pm8921_chg_chip *chip, int clear) |
| { |
| int rc; |
| |
| rc = pm_chg_masked_write(chip, CHG_CNTRL_3, ATC_FAILED_CLEAR, |
| clear ? ATC_FAILED_CLEAR : 0); |
| rc |= pm_chg_masked_write(chip, CHG_CNTRL_3, CHG_FAILED_CLEAR, |
| clear ? CHG_FAILED_CLEAR : 0); |
| return rc; |
| } |
| |
| #define CHG_CHARGE_DIS_BIT BIT(1) |
| static int pm_chg_charge_dis(struct pm8921_chg_chip *chip, int disable) |
| { |
| return pm_chg_masked_write(chip, CHG_CNTRL, CHG_CHARGE_DIS_BIT, |
| disable ? CHG_CHARGE_DIS_BIT : 0); |
| } |
| |
| static int pm_is_chg_charge_dis(struct pm8921_chg_chip *chip) |
| { |
| u8 temp; |
| |
| pm8xxx_readb(chip->dev->parent, CHG_CNTRL, &temp); |
| return temp & CHG_CHARGE_DIS_BIT; |
| } |
| #define PM8921_CHG_V_MIN_MV 3240 |
| #define PM8921_CHG_V_STEP_MV 20 |
| #define PM8921_CHG_V_STEP_10MV_OFFSET_BIT BIT(7) |
| #define PM8921_CHG_VDDMAX_MAX 4500 |
| #define PM8921_CHG_VDDMAX_MIN 3400 |
| #define PM8921_CHG_V_MASK 0x7F |
| static int __pm_chg_vddmax_set(struct pm8921_chg_chip *chip, int voltage) |
| { |
| int remainder; |
| u8 temp = 0; |
| |
| if (voltage < PM8921_CHG_VDDMAX_MIN |
| || voltage > PM8921_CHG_VDDMAX_MAX) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| |
| temp = (voltage - PM8921_CHG_V_MIN_MV) / PM8921_CHG_V_STEP_MV; |
| |
| remainder = voltage % 20; |
| if (remainder >= 10) { |
| temp |= PM8921_CHG_V_STEP_10MV_OFFSET_BIT; |
| } |
| |
| pr_debug("voltage=%d setting %02x\n", voltage, temp); |
| return pm8xxx_writeb(chip->dev->parent, CHG_VDD_MAX, temp); |
| } |
| |
| static int pm_chg_vddmax_get(struct pm8921_chg_chip *chip, int *voltage) |
| { |
| u8 temp; |
| int rc; |
| |
| rc = pm8xxx_readb(chip->dev->parent, CHG_VDD_MAX, &temp); |
| if (rc) { |
| pr_err("rc = %d while reading vdd max\n", rc); |
| *voltage = 0; |
| return rc; |
| } |
| *voltage = (int)(temp & PM8921_CHG_V_MASK) * PM8921_CHG_V_STEP_MV |
| + PM8921_CHG_V_MIN_MV; |
| if (temp & PM8921_CHG_V_STEP_10MV_OFFSET_BIT) |
| *voltage = *voltage + 10; |
| return 0; |
| } |
| |
| static int pm_chg_vddmax_set(struct pm8921_chg_chip *chip, int voltage) |
| { |
| int current_mv, ret, steps, i; |
| bool increase; |
| |
| ret = 0; |
| |
| if (voltage < PM8921_CHG_VDDMAX_MIN |
| || voltage > PM8921_CHG_VDDMAX_MAX) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| |
| ret = pm_chg_vddmax_get(chip, ¤t_mv); |
| if (ret) { |
| pr_err("Failed to read vddmax rc=%d\n", ret); |
| return -EINVAL; |
| } |
| if (current_mv == voltage) |
| return 0; |
| |
| /* Only change in increments when USB is present */ |
| if (is_usb_chg_plugged_in(chip)) { |
| if (current_mv < voltage) { |
| steps = (voltage - current_mv) / PM8921_CHG_V_STEP_MV; |
| increase = true; |
| } else { |
| steps = (current_mv - voltage) / PM8921_CHG_V_STEP_MV; |
| increase = false; |
| } |
| for (i = 0; i < steps; i++) { |
| if (increase) |
| current_mv += PM8921_CHG_V_STEP_MV; |
| else |
| current_mv -= PM8921_CHG_V_STEP_MV; |
| ret |= __pm_chg_vddmax_set(chip, current_mv); |
| } |
| } |
| ret |= __pm_chg_vddmax_set(chip, voltage); |
| return ret; |
| } |
| |
| #define PM8921_CHG_VDDSAFE_MIN 3400 |
| #define PM8921_CHG_VDDSAFE_MAX 4500 |
| static int pm_chg_vddsafe_set(struct pm8921_chg_chip *chip, int voltage) |
| { |
| u8 temp; |
| |
| if (voltage < PM8921_CHG_VDDSAFE_MIN |
| || voltage > PM8921_CHG_VDDSAFE_MAX) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| temp = (voltage - PM8921_CHG_V_MIN_MV) / PM8921_CHG_V_STEP_MV; |
| pr_debug("voltage=%d setting %02x\n", voltage, temp); |
| return pm_chg_masked_write(chip, CHG_VDD_SAFE, PM8921_CHG_V_MASK, temp); |
| } |
| |
| #define PM8921_CHG_VBATDET_MIN 3240 |
| #define PM8921_CHG_VBATDET_MAX 5780 |
| static int pm_chg_vbatdet_set(struct pm8921_chg_chip *chip, int voltage) |
| { |
| u8 temp; |
| |
| if (voltage < PM8921_CHG_VBATDET_MIN |
| || voltage > PM8921_CHG_VBATDET_MAX) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| temp = (voltage - PM8921_CHG_V_MIN_MV) / PM8921_CHG_V_STEP_MV; |
| pr_debug("voltage=%d setting %02x\n", voltage, temp); |
| return pm_chg_masked_write(chip, CHG_VBAT_DET, PM8921_CHG_V_MASK, temp); |
| } |
| |
| #define PM8921_CHG_VINMIN_MIN_MV 3800 |
| #define PM8921_CHG_VINMIN_STEP_MV 100 |
| #define PM8921_CHG_VINMIN_USABLE_MAX 6500 |
| #define PM8921_CHG_VINMIN_USABLE_MIN 4300 |
| #define PM8921_CHG_VINMIN_MASK 0x1F |
| static int pm_chg_vinmin_set(struct pm8921_chg_chip *chip, int voltage) |
| { |
| u8 temp; |
| |
| if (voltage < PM8921_CHG_VINMIN_USABLE_MIN |
| || voltage > PM8921_CHG_VINMIN_USABLE_MAX) { |
| pr_err("bad mV=%d asked to set\n", voltage); |
| return -EINVAL; |
| } |
| temp = (voltage - PM8921_CHG_VINMIN_MIN_MV) / PM8921_CHG_VINMIN_STEP_MV; |
| pr_debug("voltage=%d setting %02x\n", voltage, temp); |
| return pm_chg_masked_write(chip, CHG_VIN_MIN, PM8921_CHG_VINMIN_MASK, |
| temp); |
| } |
| |
| static int pm_chg_vinmin_get(struct pm8921_chg_chip *chip) |
| { |
| u8 temp; |
| int rc, voltage_mv; |
| |
| rc = pm8xxx_readb(chip->dev->parent, CHG_VIN_MIN, &temp); |
| temp &= PM8921_CHG_VINMIN_MASK; |
| |
| voltage_mv = PM8921_CHG_VINMIN_MIN_MV + |
| (int)temp * PM8921_CHG_VINMIN_STEP_MV; |
| |
| return voltage_mv; |
| } |
| |
| #define PM8917_USB_UVD_MIN_MV 3850 |
| #define PM8917_USB_UVD_MAX_MV 4350 |
| #define PM8917_USB_UVD_STEP_MV 100 |
| #define PM8917_USB_UVD_MASK 0x7 |
| static int pm_chg_uvd_threshold_set(struct pm8921_chg_chip *chip, int thresh_mv) |
| { |
| u8 temp; |
| |
| if (thresh_mv < PM8917_USB_UVD_MIN_MV |
| || thresh_mv > PM8917_USB_UVD_MAX_MV) { |
| pr_err("bad mV=%d asked to set\n", thresh_mv); |
| return -EINVAL; |
| } |
| temp = (thresh_mv - PM8917_USB_UVD_MIN_MV) / PM8917_USB_UVD_STEP_MV; |
| return pm_chg_masked_write(chip, OVP_USB_UVD, |
| PM8917_USB_UVD_MASK, temp); |
| } |
| |
| #define PM8921_CHG_IBATMAX_MIN 325 |
| #define PM8921_CHG_IBATMAX_MAX 2000 |
| #define PM8921_CHG_I_MIN_MA 225 |
| #define PM8921_CHG_I_STEP_MA 50 |
| #define PM8921_CHG_I_MASK 0x3F |
| static int pm_chg_ibatmax_set(struct pm8921_chg_chip *chip, int chg_current) |
| { |
| u8 temp; |
| |
| if (chg_current < PM8921_CHG_IBATMAX_MIN |
| || chg_current > PM8921_CHG_IBATMAX_MAX) { |
| pr_err("bad mA=%d asked to set\n", chg_current); |
| return -EINVAL; |
| } |
| temp = (chg_current - PM8921_CHG_I_MIN_MA) / PM8921_CHG_I_STEP_MA; |
| return pm_chg_masked_write(chip, CHG_IBAT_MAX, PM8921_CHG_I_MASK, temp); |
| } |
| |
| #define PM8921_CHG_IBATSAFE_MIN 225 |
| #define PM8921_CHG_IBATSAFE_MAX 3375 |
| static int pm_chg_ibatsafe_set(struct pm8921_chg_chip *chip, int chg_current) |
| { |
| u8 temp; |
| |
| if (chg_current < PM8921_CHG_IBATSAFE_MIN |
| || chg_current > PM8921_CHG_IBATSAFE_MAX) { |
| pr_err("bad mA=%d asked to set\n", chg_current); |
| return -EINVAL; |
| } |
| temp = (chg_current - PM8921_CHG_I_MIN_MA) / PM8921_CHG_I_STEP_MA; |
| return pm_chg_masked_write(chip, CHG_IBAT_SAFE, |
| PM8921_CHG_I_MASK, temp); |
| } |
| |
| #define PM8921_CHG_ITERM_MIN_MA 50 |
| #define PM8921_CHG_ITERM_MAX_MA 200 |
| #define PM8921_CHG_ITERM_STEP_MA 10 |
| #define PM8921_CHG_ITERM_MASK 0xF |
| static int pm_chg_iterm_set(struct pm8921_chg_chip *chip, int chg_current) |
| { |
| u8 temp; |
| |
| if (chg_current < PM8921_CHG_ITERM_MIN_MA |
| || chg_current > PM8921_CHG_ITERM_MAX_MA) { |
| pr_err("bad mA=%d asked to set\n", chg_current); |
| return -EINVAL; |
| } |
| |
| temp = (chg_current - PM8921_CHG_ITERM_MIN_MA) |
| / PM8921_CHG_ITERM_STEP_MA; |
| return pm_chg_masked_write(chip, CHG_ITERM, PM8921_CHG_ITERM_MASK, |
| temp); |
| } |
| |
| static int pm_chg_iterm_get(struct pm8921_chg_chip *chip, int *chg_current) |
| { |
| u8 temp; |
| int rc; |
| |
| rc = pm8xxx_readb(chip->dev->parent, CHG_ITERM, &temp); |
| if (rc) { |
| pr_err("err=%d reading CHG_ITEM\n", rc); |
| *chg_current = 0; |
| return rc; |
| } |
| temp &= PM8921_CHG_ITERM_MASK; |
| *chg_current = (int)temp * PM8921_CHG_ITERM_STEP_MA |
| + PM8921_CHG_ITERM_MIN_MA; |
| return 0; |
| } |
| |
| struct usb_ma_limit_entry { |
| int usb_ma; |
| u8 value; |
| }; |
| |
| static struct usb_ma_limit_entry usb_ma_table[] = { |
| {100, 0x0}, |
| {200, 0x1}, |
| {500, 0x2}, |
| {600, 0x3}, |
| {700, 0x4}, |
| {800, 0x5}, |
| {850, 0x6}, |
| {900, 0x8}, |
| {950, 0x7}, |
| {1000, 0x9}, |
| {1100, 0xA}, |
| {1200, 0xB}, |
| {1300, 0xC}, |
| {1400, 0xD}, |
| {1500, 0xE}, |
| {1600, 0xF}, |
| }; |
| |
| #define PM8921_CHG_IUSB_MASK 0x1C |
| #define PM8921_CHG_IUSB_SHIFT 2 |
| #define PM8921_CHG_IUSB_MAX 7 |
| #define PM8921_CHG_IUSB_MIN 0 |
| #define PM8917_IUSB_FINE_RES BIT(0) |
| static int pm_chg_iusbmax_set(struct pm8921_chg_chip *chip, int reg_val) |
| { |
| u8 temp, fineres; |
| int rc; |
| |
| fineres = PM8917_IUSB_FINE_RES & usb_ma_table[reg_val].value; |
| reg_val = usb_ma_table[reg_val].value >> 1; |
| |
| if (reg_val < PM8921_CHG_IUSB_MIN || reg_val > PM8921_CHG_IUSB_MAX) { |
| pr_err("bad mA=%d asked to set\n", reg_val); |
| return -EINVAL; |
| } |
| temp = reg_val << PM8921_CHG_IUSB_SHIFT; |
| |
| /* IUSB_FINE_RES */ |
| if (chip->iusb_fine_res) { |
| /* Clear IUSB_FINE_RES bit to avoid overshoot */ |
| rc = pm_chg_masked_write(chip, IUSB_FINE_RES, |
| PM8917_IUSB_FINE_RES, 0); |
| |
| rc |= pm_chg_masked_write(chip, PBL_ACCESS2, |
| PM8921_CHG_IUSB_MASK, temp); |
| |
| if (rc) { |
| pr_err("Failed to write PBL_ACCESS2 rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (fineres) { |
| rc = pm_chg_masked_write(chip, IUSB_FINE_RES, |
| PM8917_IUSB_FINE_RES, fineres); |
| if (rc) |
| pr_err("Failed to write ISUB_FINE_RES rc=%d\n", |
| rc); |
| } |
| } else { |
| rc = pm_chg_masked_write(chip, PBL_ACCESS2, |
| PM8921_CHG_IUSB_MASK, temp); |
| if (rc) |
| pr_err("Failed to write PBL_ACCESS2 rc=%d\n", rc); |
| } |
| |
| return rc; |
| } |
| |
| static int pm_chg_iusbmax_get(struct pm8921_chg_chip *chip, int *mA) |
| { |
| u8 temp, fineres; |
| int rc, i; |
| |
| fineres = 0; |
| *mA = 0; |
| rc = pm8xxx_readb(chip->dev->parent, PBL_ACCESS2, &temp); |
| if (rc) { |
| pr_err("err=%d reading PBL_ACCESS2\n", rc); |
| return rc; |
| } |
| |
| if (chip->iusb_fine_res) { |
| rc = pm8xxx_readb(chip->dev->parent, IUSB_FINE_RES, &fineres); |
| if (rc) { |
| pr_err("err=%d reading IUSB_FINE_RES\n", rc); |
| return rc; |
| } |
| } |
| temp &= PM8921_CHG_IUSB_MASK; |
| temp = temp >> PM8921_CHG_IUSB_SHIFT; |
| |
| temp = (temp << 1) | (fineres & PM8917_IUSB_FINE_RES); |
| for (i = ARRAY_SIZE(usb_ma_table) - 1; i >= 0; i--) { |
| if (usb_ma_table[i].value == temp) |
| break; |
| } |
| |
| *mA = usb_ma_table[i].usb_ma; |
| |
| return rc; |
| } |
| |
| #define PM8921_CHG_WD_MASK 0x1F |
| static int pm_chg_disable_wd(struct pm8921_chg_chip *chip) |
| { |
| /* writing 0 to the wd timer disables it */ |
| return pm_chg_masked_write(chip, CHG_TWDOG, PM8921_CHG_WD_MASK, 0); |
| } |
| |
| #define PM8921_CHG_TCHG_MASK 0x7F |
| #define PM8921_CHG_TCHG_MIN 4 |
| #define PM8921_CHG_TCHG_MAX 512 |
| #define PM8921_CHG_TCHG_STEP 4 |
| static int pm_chg_tchg_max_set(struct pm8921_chg_chip *chip, int minutes) |
| { |
| u8 temp; |
| |
| if (minutes < PM8921_CHG_TCHG_MIN || minutes > PM8921_CHG_TCHG_MAX) { |
| pr_err("bad max minutes =%d asked to set\n", minutes); |
| return -EINVAL; |
| } |
| |
| temp = (minutes - 1)/PM8921_CHG_TCHG_STEP; |
| return pm_chg_masked_write(chip, CHG_TCHG_MAX, PM8921_CHG_TCHG_MASK, |
| temp); |
| } |
| |
| #define PM8921_CHG_TTRKL_MASK 0x3F |
| #define PM8921_CHG_TTRKL_MIN 1 |
| #define PM8921_CHG_TTRKL_MAX 64 |
| static int pm_chg_ttrkl_max_set(struct pm8921_chg_chip *chip, int minutes) |
| { |
| u8 temp; |
| |
| if (minutes < PM8921_CHG_TTRKL_MIN || minutes > PM8921_CHG_TTRKL_MAX) { |
| pr_err("bad max minutes =%d asked to set\n", minutes); |
| return -EINVAL; |
| } |
| |
| temp = minutes - 1; |
| return pm_chg_masked_write(chip, CHG_TTRKL_MAX, PM8921_CHG_TTRKL_MASK, |
| temp); |
| } |
| |
| #define PM8921_CHG_VTRKL_MIN_MV 2050 |
| #define PM8921_CHG_VTRKL_MAX_MV 2800 |
| #define PM8921_CHG_VTRKL_STEP_MV 50 |
| #define PM8921_CHG_VTRKL_SHIFT 4 |
| #define PM8921_CHG_VTRKL_MASK 0xF0 |
| static int pm_chg_vtrkl_low_set(struct pm8921_chg_chip *chip, int millivolts) |
| { |
| u8 temp; |
| |
| if (millivolts < PM8921_CHG_VTRKL_MIN_MV |
| || millivolts > PM8921_CHG_VTRKL_MAX_MV) { |
| pr_err("bad voltage = %dmV asked to set\n", millivolts); |
| return -EINVAL; |
| } |
| |
| temp = (millivolts - PM8921_CHG_VTRKL_MIN_MV)/PM8921_CHG_VTRKL_STEP_MV; |
| temp = temp << PM8921_CHG_VTRKL_SHIFT; |
| return pm_chg_masked_write(chip, CHG_VTRICKLE, PM8921_CHG_VTRKL_MASK, |
| temp); |
| } |
| |
| #define PM8921_CHG_VWEAK_MIN_MV 2100 |
| #define PM8921_CHG_VWEAK_MAX_MV 3600 |
| #define PM8921_CHG_VWEAK_STEP_MV 100 |
| #define PM8921_CHG_VWEAK_MASK 0x0F |
| static int pm_chg_vweak_set(struct pm8921_chg_chip *chip, int millivolts) |
| { |
| u8 temp; |
| |
| if (millivolts < PM8921_CHG_VWEAK_MIN_MV |
| || millivolts > PM8921_CHG_VWEAK_MAX_MV) { |
| pr_err("bad voltage = %dmV asked to set\n", millivolts); |
| return -EINVAL; |
| } |
| |
| temp = (millivolts - PM8921_CHG_VWEAK_MIN_MV)/PM8921_CHG_VWEAK_STEP_MV; |
| return pm_chg_masked_write(chip, CHG_VTRICKLE, PM8921_CHG_VWEAK_MASK, |
| temp); |
| } |
| |
| #define PM8921_CHG_ITRKL_MIN_MA 50 |
| #define PM8921_CHG_ITRKL_MAX_MA 200 |
| #define PM8921_CHG_ITRKL_MASK 0x0F |
| #define PM8921_CHG_ITRKL_STEP_MA 10 |
| static int pm_chg_itrkl_set(struct pm8921_chg_chip *chip, int milliamps) |
| { |
| u8 temp; |
| |
| if (milliamps < PM8921_CHG_ITRKL_MIN_MA |
| || milliamps > PM8921_CHG_ITRKL_MAX_MA) { |
| pr_err("bad current = %dmA asked to set\n", milliamps); |
| return -EINVAL; |
| } |
| |
| temp = (milliamps - PM8921_CHG_ITRKL_MIN_MA)/PM8921_CHG_ITRKL_STEP_MA; |
| |
| return pm_chg_masked_write(chip, CHG_ITRICKLE, PM8921_CHG_ITRKL_MASK, |
| temp); |
| } |
| |
| #define PM8921_CHG_IWEAK_MIN_MA 325 |
| #define PM8921_CHG_IWEAK_MAX_MA 525 |
| #define PM8921_CHG_IWEAK_SHIFT 7 |
| #define PM8921_CHG_IWEAK_MASK 0x80 |
| static int pm_chg_iweak_set(struct pm8921_chg_chip *chip, int milliamps) |
| { |
| u8 temp; |
| |
| if (milliamps < PM8921_CHG_IWEAK_MIN_MA |
| || milliamps > PM8921_CHG_IWEAK_MAX_MA) { |
| pr_err("bad current = %dmA asked to set\n", milliamps); |
| return -EINVAL; |
| } |
| |
| if (milliamps < PM8921_CHG_IWEAK_MAX_MA) |
| temp = 0; |
| else |
| temp = 1; |
| |
| temp = temp << PM8921_CHG_IWEAK_SHIFT; |
| return pm_chg_masked_write(chip, CHG_ITRICKLE, PM8921_CHG_IWEAK_MASK, |
| temp); |
| } |
| |
| #define PM8921_CHG_BATT_TEMP_THR_COLD BIT(1) |
| #define PM8921_CHG_BATT_TEMP_THR_COLD_SHIFT 1 |
| static int pm_chg_batt_cold_temp_config(struct pm8921_chg_chip *chip, |
| enum pm8921_chg_cold_thr cold_thr) |
| { |
| u8 temp; |
| |
| temp = cold_thr << PM8921_CHG_BATT_TEMP_THR_COLD_SHIFT; |
| temp = temp & PM8921_CHG_BATT_TEMP_THR_COLD; |
| return pm_chg_masked_write(chip, CHG_CNTRL_2, |
| PM8921_CHG_BATT_TEMP_THR_COLD, |
| temp); |
| } |
| |
| #define PM8921_CHG_BATT_TEMP_THR_HOT BIT(0) |
| #define PM8921_CHG_BATT_TEMP_THR_HOT_SHIFT 0 |
| static int pm_chg_batt_hot_temp_config(struct pm8921_chg_chip *chip, |
| enum pm8921_chg_hot_thr hot_thr) |
| { |
| u8 temp; |
| |
| temp = hot_thr << PM8921_CHG_BATT_TEMP_THR_HOT_SHIFT; |
| temp = temp & PM8921_CHG_BATT_TEMP_THR_HOT; |
| return pm_chg_masked_write(chip, CHG_CNTRL_2, |
| PM8921_CHG_BATT_TEMP_THR_HOT, |
| temp); |
| } |
| |
| #define PM8921_CHG_LED_SRC_CONFIG_SHIFT 4 |
| #define PM8921_CHG_LED_SRC_CONFIG_MASK 0x30 |
| static int pm_chg_led_src_config(struct pm8921_chg_chip *chip, |
| enum pm8921_chg_led_src_config led_src_config) |
| { |
| u8 temp; |
| |
| if (led_src_config < LED_SRC_GND || |
| led_src_config > LED_SRC_BYPASS) |
| return -EINVAL; |
| |
| if (led_src_config == LED_SRC_BYPASS) |
| return 0; |
| |
| temp = led_src_config << PM8921_CHG_LED_SRC_CONFIG_SHIFT; |
| |
| return pm_chg_masked_write(chip, CHG_CNTRL_3, |
| PM8921_CHG_LED_SRC_CONFIG_MASK, temp); |
| } |
| |
| static void disable_input_voltage_regulation(struct pm8921_chg_chip *chip) |
| { |
| u8 temp; |
| int rc; |
| |
| rc = pm8xxx_writeb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, 0x70); |
| if (rc) { |
| pr_err("Failed to write 0x70 to CTRL_TEST3 rc = %d\n", rc); |
| return; |
| } |
| rc = pm8xxx_readb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, &temp); |
| if (rc) { |
| pr_err("Failed to read CTRL_TEST3 rc = %d\n", rc); |
| return; |
| } |
| /* set the input voltage disable bit and the write bit */ |
| temp |= 0x81; |
| rc = pm8xxx_writeb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, temp); |
| if (rc) { |
| pr_err("Failed to write 0x%x to CTRL_TEST3 rc=%d\n", temp, rc); |
| return; |
| } |
| } |
| |
| static void enable_input_voltage_regulation(struct pm8921_chg_chip *chip) |
| { |
| u8 temp; |
| int rc; |
| |
| rc = pm8xxx_writeb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, 0x70); |
| if (rc) { |
| pr_err("Failed to write 0x70 to CTRL_TEST3 rc = %d\n", rc); |
| return; |
| } |
| rc = pm8xxx_readb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, &temp); |
| if (rc) { |
| pr_err("Failed to read CTRL_TEST3 rc = %d\n", rc); |
| return; |
| } |
| /* unset the input voltage disable bit */ |
| temp &= 0xFE; |
| /* set the write bit */ |
| temp |= 0x80; |
| rc = pm8xxx_writeb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, temp); |
| if (rc) { |
| pr_err("Failed to write 0x%x to CTRL_TEST3 rc=%d\n", temp, rc); |
| return; |
| } |
| } |
| |
| static int64_t read_battery_id(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| struct pm8xxx_adc_chan_result result; |
| |
| rc = pm8xxx_adc_read(chip->batt_id_channel, &result); |
| if (rc) { |
| pr_err("error reading batt id channel = %d, rc = %d\n", |
| chip->vbat_channel, rc); |
| return rc; |
| } |
| pr_debug("batt_id phy = %lld meas = 0x%llx\n", result.physical, |
| result.measurement); |
| return result.physical; |
| } |
| |
| static int is_battery_valid(struct pm8921_chg_chip *chip) |
| { |
| int64_t rc; |
| |
| if (chip->batt_id_min == 0 && chip->batt_id_max == 0) |
| return 1; |
| |
| rc = read_battery_id(chip); |
| if (rc < 0) { |
| pr_err("error reading batt id channel = %d, rc = %lld\n", |
| chip->vbat_channel, rc); |
| /* assume battery id is valid when adc error happens */ |
| return 1; |
| } |
| |
| if (rc < chip->batt_id_min || rc > chip->batt_id_max) { |
| pr_err("batt_id phy =%lld is not valid\n", rc); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static void check_battery_valid(struct pm8921_chg_chip *chip) |
| { |
| if (is_battery_valid(chip) == 0) { |
| pr_err("batt_id not valid, disbling charging\n"); |
| pm_chg_auto_enable(chip, 0); |
| } else { |
| pm_chg_auto_enable(chip, !charging_disabled); |
| } |
| } |
| |
| static void battery_id_valid(struct work_struct *work) |
| { |
| struct pm8921_chg_chip *chip = container_of(work, |
| struct pm8921_chg_chip, battery_id_valid_work); |
| |
| check_battery_valid(chip); |
| } |
| |
| static void pm8921_chg_enable_irq(struct pm8921_chg_chip *chip, int interrupt) |
| { |
| if (!__test_and_set_bit(interrupt, chip->enabled_irqs)) { |
| dev_dbg(chip->dev, "%d\n", chip->pmic_chg_irq[interrupt]); |
| enable_irq(chip->pmic_chg_irq[interrupt]); |
| } |
| } |
| |
| static void pm8921_chg_disable_irq(struct pm8921_chg_chip *chip, int interrupt) |
| { |
| if (__test_and_clear_bit(interrupt, chip->enabled_irqs)) { |
| dev_dbg(chip->dev, "%d\n", chip->pmic_chg_irq[interrupt]); |
| disable_irq_nosync(chip->pmic_chg_irq[interrupt]); |
| } |
| } |
| |
| static int pm8921_chg_is_enabled(struct pm8921_chg_chip *chip, int interrupt) |
| { |
| return test_bit(interrupt, chip->enabled_irqs); |
| } |
| |
| static bool is_ext_charging(struct pm8921_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| |
| if (!chip->ext_psy) |
| return false; |
| if (chip->ext_psy->get_property(chip->ext_psy, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, &ret)) |
| return false; |
| if (ret.intval > POWER_SUPPLY_CHARGE_TYPE_NONE) |
| return ret.intval; |
| |
| return false; |
| } |
| |
| static bool is_ext_trickle_charging(struct pm8921_chg_chip *chip) |
| { |
| union power_supply_propval ret = {0,}; |
| |
| if (!chip->ext_psy) |
| return false; |
| if (chip->ext_psy->get_property(chip->ext_psy, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, &ret)) |
| return false; |
| if (ret.intval == POWER_SUPPLY_CHARGE_TYPE_TRICKLE) |
| return true; |
| |
| return false; |
| } |
| |
| static int is_battery_charging(int fsm_state) |
| { |
| if (is_ext_charging(the_chip)) |
| return 1; |
| |
| switch (fsm_state) { |
| case FSM_STATE_ATC_2A: |
| case FSM_STATE_ATC_2B: |
| case FSM_STATE_ON_CHG_AND_BAT_6: |
| case FSM_STATE_FAST_CHG_7: |
| case FSM_STATE_TRKL_CHG_8: |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void bms_notify(struct work_struct *work) |
| { |
| struct bms_notify *n = container_of(work, struct bms_notify, work); |
| |
| if (n->is_charging) { |
| pm8921_bms_charging_began(); |
| } else { |
| pm8921_bms_charging_end(n->is_battery_full); |
| n->is_battery_full = 0; |
| } |
| } |
| |
| static void bms_notify_check(struct pm8921_chg_chip *chip) |
| { |
| int fsm_state, new_is_charging; |
| |
| fsm_state = pm_chg_get_fsm_state(chip); |
| new_is_charging = is_battery_charging(fsm_state); |
| |
| if (chip->bms_notify.is_charging ^ new_is_charging) { |
| chip->bms_notify.is_charging = new_is_charging; |
| schedule_work(&(chip->bms_notify.work)); |
| } |
| } |
| |
| static enum power_supply_property pm_power_props_usb[] = { |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| POWER_SUPPLY_PROP_SCOPE, |
| }; |
| |
| static enum power_supply_property pm_power_props_mains[] = { |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| }; |
| |
| static char *pm_power_supplied_to[] = { |
| "battery", |
| }; |
| |
| #define USB_WALL_THRESHOLD_MA 500 |
| static int pm_power_get_property_mains(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| /* Check if called before init */ |
| if (!the_chip) |
| return -EINVAL; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_PRESENT: |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = 0; |
| |
| if (the_chip->has_dc_supply) { |
| val->intval = 1; |
| return 0; |
| } |
| |
| if (charging_disabled) |
| return 0; |
| |
| /* check external charger first before the dc path */ |
| if (is_ext_charging(the_chip)) { |
| val->intval = 1; |
| return 0; |
| } |
| |
| if (pm_is_chg_charge_dis(the_chip)) { |
| val->intval = 0; |
| return 0; |
| } |
| |
| if (the_chip->dc_present) { |
| val->intval = 1; |
| return 0; |
| } |
| |
| /* USB with max current greater than 500 mA connected */ |
| if (usb_target_ma > USB_WALL_THRESHOLD_MA) |
| val->intval = is_usb_chg_plugged_in(the_chip); |
| return 0; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int switch_usb_to_charge_mode(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| |
| if (!chip->host_mode) |
| return 0; |
| |
| /* enable usbin valid comparator and remove force usb ovp fet off */ |
| rc = pm8xxx_writeb(chip->dev->parent, USB_OVP_TEST, 0xB2); |
| if (rc < 0) { |
| pr_err("Failed to write 0xB2 to USB_OVP_TEST rc = %d\n", rc); |
| return rc; |
| } |
| |
| chip->host_mode = 0; |
| |
| return 0; |
| } |
| |
| static int switch_usb_to_host_mode(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| |
| if (chip->host_mode) |
| return 0; |
| |
| /* disable usbin valid comparator and force usb ovp fet off */ |
| rc = pm8xxx_writeb(chip->dev->parent, USB_OVP_TEST, 0xB3); |
| if (rc < 0) { |
| pr_err("Failed to write 0xB3 to USB_OVP_TEST rc = %d\n", rc); |
| return rc; |
| } |
| |
| chip->host_mode = 1; |
| |
| return 0; |
| } |
| |
| static int pm_power_set_property_usb(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| /* Check if called before init */ |
| if (!the_chip) |
| return -EINVAL; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_SCOPE: |
| if (val->intval == POWER_SUPPLY_SCOPE_SYSTEM) |
| return switch_usb_to_host_mode(the_chip); |
| if (val->intval == POWER_SUPPLY_SCOPE_DEVICE) |
| return switch_usb_to_charge_mode(the_chip); |
| else |
| return -EINVAL; |
| break; |
| case POWER_SUPPLY_PROP_TYPE: |
| return pm8921_set_usb_power_supply_type(val->intval); |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int pm_power_get_property_usb(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| int current_max; |
| |
| /* Check if called before init */ |
| if (!the_chip) |
| return -EINVAL; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| if (pm_is_chg_charge_dis(the_chip)) { |
| val->intval = 0; |
| } else { |
| pm_chg_iusbmax_get(the_chip, ¤t_max); |
| val->intval = current_max; |
| } |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = 0; |
| if (charging_disabled) |
| return 0; |
| |
| /* |
| * if drawing any current from usb is disabled behave |
| * as if no usb cable is connected |
| */ |
| if (pm_is_chg_charge_dis(the_chip)) |
| return 0; |
| |
| /* USB charging */ |
| if (usb_target_ma < USB_WALL_THRESHOLD_MA) |
| val->intval = is_usb_chg_plugged_in(the_chip); |
| else |
| return 0; |
| break; |
| |
| case POWER_SUPPLY_PROP_SCOPE: |
| if (the_chip->host_mode) |
| val->intval = POWER_SUPPLY_SCOPE_SYSTEM; |
| else |
| val->intval = POWER_SUPPLY_SCOPE_DEVICE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static enum power_supply_property msm_batt_power_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_TEMP, |
| POWER_SUPPLY_PROP_ENERGY_FULL, |
| }; |
| |
| static int get_prop_battery_uvolts(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| struct pm8xxx_adc_chan_result result; |
| |
| rc = pm8xxx_adc_read(chip->vbat_channel, &result); |
| if (rc) { |
| pr_err("error reading adc channel = %d, rc = %d\n", |
| chip->vbat_channel, rc); |
| return rc; |
| } |
| pr_debug("mvolts phy = %lld meas = 0x%llx\n", result.physical, |
| result.measurement); |
| return (int)result.physical; |
| } |
| |
| static unsigned int voltage_based_capacity(struct pm8921_chg_chip *chip) |
| { |
| unsigned int current_voltage_uv = get_prop_battery_uvolts(chip); |
| unsigned int current_voltage_mv = current_voltage_uv / 1000; |
| unsigned int low_voltage = chip->min_voltage_mv; |
| unsigned int high_voltage = chip->max_voltage_mv; |
| |
| if (current_voltage_mv <= low_voltage) |
| return 0; |
| else if (current_voltage_mv >= high_voltage) |
| return 100; |
| else |
| return (current_voltage_mv - low_voltage) * 100 |
| / (high_voltage - low_voltage); |
| } |
| |
| static int get_prop_batt_present(struct pm8921_chg_chip *chip) |
| { |
| return pm_chg_get_rt_status(chip, BATT_INSERTED_IRQ); |
| } |
| |
| static int get_prop_batt_capacity(struct pm8921_chg_chip *chip) |
| { |
| int percent_soc; |
| |
| if (!get_prop_batt_present(chip)) |
| percent_soc = voltage_based_capacity(chip); |
| else |
| percent_soc = pm8921_bms_get_percent_charge(); |
| |
| if (percent_soc == -ENXIO) |
| percent_soc = voltage_based_capacity(chip); |
| |
| if (percent_soc <= 10) |
| pr_warn("low battery charge = %d%%\n", percent_soc); |
| |
| chip->recent_reported_soc = percent_soc; |
| return percent_soc; |
| } |
| |
| static int get_prop_batt_current_max(struct pm8921_chg_chip *chip) |
| { |
| int rbatt, ibatt_ua, vbatt_uv, ocv_uv; |
| int imax_ma; |
| int rc; |
| |
| rbatt = pm8921_bms_get_rbatt(); |
| |
| if (rbatt < 0) { |
| rc = -ENXIO; |
| return rc; |
| } |
| |
| rc = pm8921_bms_get_simultaneous_battery_voltage_and_current |
| (&ibatt_ua, &vbatt_uv); |
| |
| if (rc) |
| return rc; |
| |
| ocv_uv = vbatt_uv + ibatt_ua*rbatt/1000; |
| |
| imax_ma = (ocv_uv - chip->min_voltage_mv*1000)/rbatt; |
| |
| if (imax_ma < 0) |
| imax_ma = 0; |
| |
| return imax_ma*1000; |
| |
| } |
| |
| static int get_prop_batt_current(struct pm8921_chg_chip *chip) |
| { |
| int result_ua, rc; |
| |
| rc = pm8921_bms_get_battery_current(&result_ua); |
| if (rc == -ENXIO) { |
| rc = pm8xxx_ccadc_get_battery_current(&result_ua); |
| } |
| |
| if (rc) { |
| pr_err("unable to get batt current rc = %d\n", rc); |
| return rc; |
| } else { |
| return result_ua; |
| } |
| } |
| |
| static int get_prop_batt_fcc(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| |
| rc = pm8921_bms_get_fcc(); |
| if (rc < 0) |
| pr_err("unable to get batt fcc rc = %d\n", rc); |
| return rc; |
| } |
| |
| static int get_prop_batt_health(struct pm8921_chg_chip *chip) |
| { |
| int temp; |
| |
| temp = pm_chg_get_rt_status(chip, BATTTEMP_HOT_IRQ); |
| if (temp) |
| return POWER_SUPPLY_HEALTH_OVERHEAT; |
| |
| temp = pm_chg_get_rt_status(chip, BATTTEMP_COLD_IRQ); |
| if (temp) |
| return POWER_SUPPLY_HEALTH_COLD; |
| |
| return POWER_SUPPLY_HEALTH_GOOD; |
| } |
| |
| static int get_prop_charge_type(struct pm8921_chg_chip *chip) |
| { |
| int temp; |
| |
| if (!get_prop_batt_present(chip)) |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| |
| if (is_ext_trickle_charging(chip)) |
| return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; |
| |
| if (is_ext_charging(chip)) |
| return POWER_SUPPLY_CHARGE_TYPE_FAST; |
| |
| temp = pm_chg_get_rt_status(chip, TRKLCHG_IRQ); |
| if (temp) |
| return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; |
| |
| temp = pm_chg_get_rt_status(chip, FASTCHG_IRQ); |
| if (temp) |
| return POWER_SUPPLY_CHARGE_TYPE_FAST; |
| |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| } |
| |
| static int get_prop_batt_status(struct pm8921_chg_chip *chip) |
| { |
| int batt_state = POWER_SUPPLY_STATUS_DISCHARGING; |
| int fsm_state = pm_chg_get_fsm_state(chip); |
| int i; |
| |
| if (chip->ext_psy) { |
| if (chip->ext_charge_done) |
| return POWER_SUPPLY_STATUS_FULL; |
| if (chip->ext_charging) |
| return POWER_SUPPLY_STATUS_CHARGING; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(map); i++) |
| if (map[i].fsm_state == fsm_state) |
| batt_state = map[i].batt_state; |
| |
| if (fsm_state == FSM_STATE_ON_CHG_HIGHI_1) { |
| if (!pm_chg_get_rt_status(chip, BATT_INSERTED_IRQ) |
| || !pm_chg_get_rt_status(chip, BAT_TEMP_OK_IRQ) |
| || pm_chg_get_rt_status(chip, CHGHOT_IRQ) |
| || pm_chg_get_rt_status(chip, VBATDET_LOW_IRQ)) |
| |
| batt_state = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| } |
| return batt_state; |
| } |
| |
| #define MAX_TOLERABLE_BATT_TEMP_DDC 680 |
| static int get_prop_batt_temp(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| struct pm8xxx_adc_chan_result result; |
| |
| rc = pm8xxx_adc_read(chip->batt_temp_channel, &result); |
| if (rc) { |
| pr_err("error reading adc channel = %d, rc = %d\n", |
| chip->vbat_channel, rc); |
| return rc; |
| } |
| pr_debug("batt_temp phy = %lld meas = 0x%llx\n", result.physical, |
| result.measurement); |
| if (result.physical > MAX_TOLERABLE_BATT_TEMP_DDC) |
| pr_err("BATT_TEMP= %d > 68degC, device will be shutdown\n", |
| (int) result.physical); |
| |
| return (int)result.physical; |
| } |
| |
| static int pm_batt_power_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct pm8921_chg_chip *chip = container_of(psy, struct pm8921_chg_chip, |
| batt_psy); |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = get_prop_batt_status(chip); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| val->intval = get_prop_charge_type(chip); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = get_prop_batt_health(chip); |
| break; |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = get_prop_batt_present(chip); |
| break; |
| case POWER_SUPPLY_PROP_TECHNOLOGY: |
| val->intval = POWER_SUPPLY_TECHNOLOGY_LION; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| val->intval = chip->max_voltage_mv * 1000; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| val->intval = chip->min_voltage_mv * 1000; |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = get_prop_battery_uvolts(chip); |
| break; |
| case POWER_SUPPLY_PROP_CAPACITY: |
| val->intval = get_prop_batt_capacity(chip); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| val->intval = get_prop_batt_current(chip); |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = get_prop_batt_current_max(chip); |
| break; |
| case POWER_SUPPLY_PROP_TEMP: |
| val->intval = get_prop_batt_temp(chip); |
| break; |
| case POWER_SUPPLY_PROP_ENERGY_FULL: |
| val->intval = get_prop_batt_fcc(chip) * 1000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void (*notify_vbus_state_func_ptr)(int); |
| static int usb_chg_current; |
| static DEFINE_SPINLOCK(vbus_lock); |
| |
| int pm8921_charger_register_vbus_sn(void (*callback)(int)) |
| { |
| pr_debug("%p\n", callback); |
| notify_vbus_state_func_ptr = callback; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pm8921_charger_register_vbus_sn); |
| |
| /* this is passed to the hsusb via platform_data msm_otg_pdata */ |
| void pm8921_charger_unregister_vbus_sn(void (*callback)(int)) |
| { |
| pr_debug("%p\n", callback); |
| notify_vbus_state_func_ptr = NULL; |
| } |
| EXPORT_SYMBOL_GPL(pm8921_charger_unregister_vbus_sn); |
| |
| static void notify_usb_of_the_plugin_event(int plugin) |
| { |
| plugin = !!plugin; |
| if (notify_vbus_state_func_ptr) { |
| pr_debug("notifying plugin\n"); |
| (*notify_vbus_state_func_ptr) (plugin); |
| } else { |
| pr_debug("unable to notify plugin\n"); |
| } |
| } |
| |
| /* assumes vbus_lock is held */ |
| static void __pm8921_charger_vbus_draw(unsigned int mA) |
| { |
| int i, rc; |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return; |
| } |
| |
| if (mA >= 0 && mA <= 2) { |
| usb_chg_current = 0; |
| rc = pm_chg_iusbmax_set(the_chip, 0); |
| if (rc) { |
| pr_err("unable to set iusb to %d rc = %d\n", 0, rc); |
| } |
| rc = pm_chg_usb_suspend_enable(the_chip, 1); |
| if (rc) |
| pr_err("fail to set suspend bit rc=%d\n", rc); |
| } else { |
| rc = pm_chg_usb_suspend_enable(the_chip, 0); |
| if (rc) |
| pr_err("fail to reset suspend bit rc=%d\n", rc); |
| for (i = ARRAY_SIZE(usb_ma_table) - 1; i >= 0; i--) { |
| if (usb_ma_table[i].usb_ma <= mA) |
| break; |
| } |
| |
| /* Check if IUSB_FINE_RES is available */ |
| if ((usb_ma_table[i].value & PM8917_IUSB_FINE_RES) |
| && !the_chip->iusb_fine_res) |
| i--; |
| if (i < 0) |
| i = 0; |
| rc = pm_chg_iusbmax_set(the_chip, i); |
| if (rc) { |
| pr_err("unable to set iusb to %d rc = %d\n", i, rc); |
| } |
| } |
| } |
| |
| /* USB calls these to tell us how much max usb current the system can draw */ |
| void pm8921_charger_vbus_draw(unsigned int mA) |
| { |
| unsigned long flags; |
| |
| pr_debug("Enter charge=%d\n", mA); |
| |
| if (!the_chip) { |
| pr_err("chip not yet initalized\n"); |
| return; |
| } |
| |
| /* |
| * Reject VBUS requests if USB connection is the only available |
| * power source. This makes sure that if booting without |
| * battery the iusb_max value is not decreased avoiding potential |
| * brown_outs. |
| * |
| * This would also apply when the battery has been |
| * removed from the running system. |
| */ |
| if (!get_prop_batt_present(the_chip) |
| && !is_dc_chg_plugged_in(the_chip)) { |
| if (!the_chip->has_dc_supply) { |
| pr_err("rejected: no other power source connected\n"); |
| return; |
| } |
| } |
| |
| if (usb_max_current && mA > usb_max_current) { |
| pr_warn("restricting usb current to %d instead of %d\n", |
| usb_max_current, mA); |
| mA = usb_max_current; |
| } |
| if (usb_target_ma == 0 && mA > USB_WALL_THRESHOLD_MA) |
| usb_target_ma = mA; |
| |
| spin_lock_irqsave(&vbus_lock, flags); |
| if (the_chip) { |
| if (mA > USB_WALL_THRESHOLD_MA) |
| __pm8921_charger_vbus_draw(USB_WALL_THRESHOLD_MA); |
| else |
| __pm8921_charger_vbus_draw(mA); |
| } else { |
| /* |
| * called before pmic initialized, |
| * save this value and use it at probe |
| */ |
| if (mA > USB_WALL_THRESHOLD_MA) |
| usb_chg_current = USB_WALL_THRESHOLD_MA; |
| else |
| usb_chg_current = mA; |
| } |
| spin_unlock_irqrestore(&vbus_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(pm8921_charger_vbus_draw); |
| |
| int pm8921_charger_enable(bool enable) |
| { |
| int rc; |
| |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| enable = !!enable; |
| rc = pm_chg_auto_enable(the_chip, enable); |
| if (rc) |
| pr_err("Failed rc=%d\n", rc); |
| return rc; |
| } |
| EXPORT_SYMBOL(pm8921_charger_enable); |
| |
| int pm8921_is_usb_chg_plugged_in(void) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| return is_usb_chg_plugged_in(the_chip); |
| } |
| EXPORT_SYMBOL(pm8921_is_usb_chg_plugged_in); |
| |
| int pm8921_is_dc_chg_plugged_in(void) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| return is_dc_chg_plugged_in(the_chip); |
| } |
| EXPORT_SYMBOL(pm8921_is_dc_chg_plugged_in); |
| |
| int pm8921_is_battery_present(void) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| return get_prop_batt_present(the_chip); |
| } |
| EXPORT_SYMBOL(pm8921_is_battery_present); |
| |
| int pm8921_is_batfet_closed(void) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| return is_batfet_closed(the_chip); |
| } |
| EXPORT_SYMBOL(pm8921_is_batfet_closed); |
| /* |
| * Disabling the charge current limit causes current |
| * current limits to have no monitoring. An adequate charger |
| * capable of supplying high current while sustaining VIN_MIN |
| * is required if the limiting is disabled. |
| */ |
| int pm8921_disable_input_current_limit(bool disable) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| if (disable) { |
| pr_warn("Disabling input current limit!\n"); |
| |
| return pm8xxx_writeb(the_chip->dev->parent, |
| CHG_BUCK_CTRL_TEST3, 0xF2); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(pm8921_disable_input_current_limit); |
| |
| int pm8917_set_under_voltage_detection_threshold(int mv) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| return pm_chg_uvd_threshold_set(the_chip, mv); |
| } |
| EXPORT_SYMBOL(pm8917_set_under_voltage_detection_threshold); |
| |
| int pm8921_set_max_battery_charge_current(int ma) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| return pm_chg_ibatmax_set(the_chip, ma); |
| } |
| EXPORT_SYMBOL(pm8921_set_max_battery_charge_current); |
| |
| int pm8921_disable_source_current(bool disable) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| if (disable) |
| pr_warn("current drawn from chg=0, battery provides current\n"); |
| return pm_chg_charge_dis(the_chip, disable); |
| } |
| EXPORT_SYMBOL(pm8921_disable_source_current); |
| |
| int pm8921_regulate_input_voltage(int voltage) |
| { |
| int rc; |
| |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| rc = pm_chg_vinmin_set(the_chip, voltage); |
| |
| if (rc == 0) |
| the_chip->vin_min = voltage; |
| |
| return rc; |
| } |
| |
| #define USB_OV_THRESHOLD_MASK 0x60 |
| #define USB_OV_THRESHOLD_SHIFT 5 |
| int pm8921_usb_ovp_set_threshold(enum pm8921_usb_ov_threshold ov) |
| { |
| u8 temp; |
| |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| |
| if (ov > PM_USB_OV_7V) { |
| pr_err("limiting to over voltage threshold to 7volts\n"); |
| ov = PM_USB_OV_7V; |
| } |
| |
| temp = USB_OV_THRESHOLD_MASK & (ov << USB_OV_THRESHOLD_SHIFT); |
| |
| return pm_chg_masked_write(the_chip, USB_OVP_CONTROL, |
| USB_OV_THRESHOLD_MASK, temp); |
| } |
| EXPORT_SYMBOL(pm8921_usb_ovp_set_threshold); |
| |
| #define USB_DEBOUNCE_TIME_MASK 0x06 |
| #define USB_DEBOUNCE_TIME_SHIFT 1 |
| int pm8921_usb_ovp_set_hystersis(enum pm8921_usb_debounce_time ms) |
| { |
| u8 temp; |
| |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| |
| if (ms > PM_USB_DEBOUNCE_80P5MS) { |
| pr_err("limiting debounce to 80.5ms\n"); |
| ms = PM_USB_DEBOUNCE_80P5MS; |
| } |
| |
| temp = USB_DEBOUNCE_TIME_MASK & (ms << USB_DEBOUNCE_TIME_SHIFT); |
| |
| return pm_chg_masked_write(the_chip, USB_OVP_CONTROL, |
| USB_DEBOUNCE_TIME_MASK, temp); |
| } |
| EXPORT_SYMBOL(pm8921_usb_ovp_set_hystersis); |
| |
| #define USB_OVP_DISABLE_MASK 0x80 |
| int pm8921_usb_ovp_disable(int disable) |
| { |
| u8 temp = 0; |
| |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| |
| if (disable) |
| temp = USB_OVP_DISABLE_MASK; |
| |
| return pm_chg_masked_write(the_chip, USB_OVP_CONTROL, |
| USB_OVP_DISABLE_MASK, temp); |
| } |
| |
| bool pm8921_is_battery_charging(int *source) |
| { |
| int fsm_state, is_charging, dc_present, usb_present; |
| |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| fsm_state = pm_chg_get_fsm_state(the_chip); |
| is_charging = is_battery_charging(fsm_state); |
| if (is_charging == 0) { |
| *source = PM8921_CHG_SRC_NONE; |
| return is_charging; |
| } |
| |
| if (source == NULL) |
| return is_charging; |
| |
| /* the battery is charging, the source is requested, find it */ |
| dc_present = is_dc_chg_plugged_in(the_chip); |
| usb_present = is_usb_chg_plugged_in(the_chip); |
| |
| if (dc_present && !usb_present) |
| *source = PM8921_CHG_SRC_DC; |
| |
| if (usb_present && !dc_present) |
| *source = PM8921_CHG_SRC_USB; |
| |
| if (usb_present && dc_present) |
| /* |
| * The system always chooses dc for charging since it has |
| * higher priority. |
| */ |
| *source = PM8921_CHG_SRC_DC; |
| |
| return is_charging; |
| } |
| EXPORT_SYMBOL(pm8921_is_battery_charging); |
| |
| int pm8921_set_usb_power_supply_type(enum power_supply_type type) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| |
| if (type < POWER_SUPPLY_TYPE_USB) |
| return -EINVAL; |
| |
| the_chip->usb_psy.type = type; |
| power_supply_changed(&the_chip->usb_psy); |
| power_supply_changed(&the_chip->dc_psy); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(pm8921_set_usb_power_supply_type); |
| |
| int pm8921_batt_temperature(void) |
| { |
| if (!the_chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| return get_prop_batt_temp(the_chip); |
| } |
| |
| static void handle_usb_insertion_removal(struct pm8921_chg_chip *chip) |
| { |
| int usb_present; |
| |
| pm_chg_failed_clear(chip, 1); |
| usb_present = is_usb_chg_plugged_in(chip); |
| if (chip->usb_present ^ usb_present) { |
| notify_usb_of_the_plugin_event(usb_present); |
| chip->usb_present = usb_present; |
| power_supply_changed(&chip->usb_psy); |
| power_supply_changed(&chip->batt_psy); |
| pm8921_bms_calibrate_hkadc(); |
| } |
| if (usb_present) { |
| schedule_delayed_work(&chip->unplug_check_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (UNPLUG_CHECK_WAIT_PERIOD_MS))); |
| pm8921_chg_enable_irq(chip, CHG_GONE_IRQ); |
| } else { |
| /* USB unplugged reset target current */ |
| usb_target_ma = 0; |
| pm8921_chg_disable_irq(chip, CHG_GONE_IRQ); |
| } |
| enable_input_voltage_regulation(chip); |
| bms_notify_check(chip); |
| } |
| |
| static void handle_stop_ext_chg(struct pm8921_chg_chip *chip) |
| { |
| if (!chip->ext_psy) { |
| pr_debug("external charger not registered.\n"); |
| return; |
| } |
| |
| if (!chip->ext_charging) { |
| pr_debug("already not charging.\n"); |
| return; |
| } |
| |
| power_supply_set_charge_type(chip->ext_psy, |
| POWER_SUPPLY_CHARGE_TYPE_NONE); |
| pm8921_disable_source_current(false); /* release BATFET */ |
| power_supply_changed(&chip->dc_psy); |
| chip->ext_charging = false; |
| chip->ext_charge_done = false; |
| bms_notify_check(chip); |
| /* Update battery charging LEDs and user space battery info */ |
| power_supply_changed(&chip->batt_psy); |
| } |
| |
| static void handle_start_ext_chg(struct pm8921_chg_chip *chip) |
| { |
| int dc_present; |
| int batt_present; |
| int batt_temp_ok; |
| int vbat_ov; |
| unsigned long delay = |
| round_jiffies_relative(msecs_to_jiffies(EOC_CHECK_PERIOD_MS)); |
| |
| if (!chip->ext_psy) { |
| pr_debug("external charger not registered.\n"); |
| return; |
| } |
| |
| if (chip->ext_charging) { |
| pr_debug("already charging.\n"); |
| return; |
| } |
| |
| dc_present = is_dc_chg_plugged_in(the_chip); |
| batt_present = pm_chg_get_rt_status(chip, BATT_INSERTED_IRQ); |
| batt_temp_ok = pm_chg_get_rt_status(chip, BAT_TEMP_OK_IRQ); |
| |
| if (!dc_present) { |
| pr_warn("%s. dc not present.\n", __func__); |
| return; |
| } |
| if (!batt_present) { |
| pr_warn("%s. battery not present.\n", __func__); |
| return; |
| } |
| if (!batt_temp_ok) { |
| pr_warn("%s. battery temperature not ok.\n", __func__); |
| return; |
| } |
| pm8921_disable_source_current(true); /* Force BATFET=ON */ |
| vbat_ov = pm_chg_get_rt_status(chip, VBAT_OV_IRQ); |
| if (vbat_ov) { |
| pr_warn("%s. battery over voltage.\n", __func__); |
| return; |
| } |
| |
| schedule_delayed_work(&chip->unplug_check_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (UNPLUG_CHECK_WAIT_PERIOD_MS))); |
| pm8921_chg_enable_irq(chip, CHG_GONE_IRQ); |
| |
| power_supply_set_online(chip->ext_psy, dc_present); |
| power_supply_set_charge_type(chip->ext_psy, |
| POWER_SUPPLY_CHARGE_TYPE_FAST); |
| power_supply_changed(&chip->dc_psy); |
| chip->ext_charging = true; |
| chip->ext_charge_done = false; |
| bms_notify_check(chip); |
| /* Start BMS */ |
| schedule_delayed_work(&chip->eoc_work, delay); |
| wake_lock(&chip->eoc_wake_lock); |
| /* Update battery charging LEDs and user space battery info */ |
| power_supply_changed(&chip->batt_psy); |
| } |
| |
| static void turn_off_ovp_fet(struct pm8921_chg_chip *chip, u16 ovptestreg) |
| { |
| u8 temp; |
| int rc; |
| |
| rc = pm8xxx_writeb(chip->dev->parent, ovptestreg, 0x30); |
| if (rc) { |
| pr_err("Failed to write 0x30 to OVP_TEST rc = %d\n", rc); |
| return; |
| } |
| rc = pm8xxx_readb(chip->dev->parent, ovptestreg, &temp); |
| if (rc) { |
| pr_err("Failed to read from OVP_TEST rc = %d\n", rc); |
| return; |
| } |
| /* set ovp fet disable bit and the write bit */ |
| temp |= 0x81; |
| rc = pm8xxx_writeb(chip->dev->parent, ovptestreg, temp); |
| if (rc) { |
| pr_err("Failed to write 0x%x OVP_TEST rc=%d\n", temp, rc); |
| return; |
| } |
| } |
| |
| static void turn_on_ovp_fet(struct pm8921_chg_chip *chip, u16 ovptestreg) |
| { |
| u8 temp; |
| int rc; |
| |
| rc = pm8xxx_writeb(chip->dev->parent, ovptestreg, 0x30); |
| if (rc) { |
| pr_err("Failed to write 0x30 to OVP_TEST rc = %d\n", rc); |
| return; |
| } |
| rc = pm8xxx_readb(chip->dev->parent, ovptestreg, &temp); |
| if (rc) { |
| pr_err("Failed to read from OVP_TEST rc = %d\n", rc); |
| return; |
| } |
| /* unset ovp fet disable bit and set the write bit */ |
| temp &= 0xFE; |
| temp |= 0x80; |
| rc = pm8xxx_writeb(chip->dev->parent, ovptestreg, temp); |
| if (rc) { |
| pr_err("Failed to write 0x%x to OVP_TEST rc = %d\n", |
| temp, rc); |
| return; |
| } |
| } |
| |
| static int param_open_ovp_counter = 10; |
| module_param(param_open_ovp_counter, int, 0644); |
| |
| #define USB_ACTIVE_BIT BIT(5) |
| #define DC_ACTIVE_BIT BIT(6) |
| static int is_active_chg_plugged_in(struct pm8921_chg_chip *chip, |
| u8 active_chg_mask) |
| { |
| if (active_chg_mask & USB_ACTIVE_BIT) |
| return pm_chg_get_rt_status(chip, USBIN_VALID_IRQ); |
| else if (active_chg_mask & DC_ACTIVE_BIT) |
| return pm_chg_get_rt_status(chip, DCIN_VALID_IRQ); |
| else |
| return 0; |
| } |
| |
| #define WRITE_BANK_4 0xC0 |
| #define OVP_DEBOUNCE_TIME 0x06 |
| static void unplug_ovp_fet_open(struct pm8921_chg_chip *chip) |
| { |
| int chg_gone = 0, active_chg_plugged_in = 0; |
| int count = 0; |
| u8 active_mask = 0; |
| u16 ovpreg, ovptestreg; |
| |
| if (is_usb_chg_plugged_in(chip) && |
| (chip->active_path & USB_ACTIVE_BIT)) { |
| ovpreg = USB_OVP_CONTROL; |
| ovptestreg = USB_OVP_TEST; |
| active_mask = USB_ACTIVE_BIT; |
| } else if (is_dc_chg_plugged_in(chip) && |
| (chip->active_path & DC_ACTIVE_BIT)) { |
| ovpreg = DC_OVP_CONTROL; |
| ovptestreg = DC_OVP_TEST; |
| active_mask = DC_ACTIVE_BIT; |
| } else { |
| return; |
| } |
| |
| while (count++ < param_open_ovp_counter) { |
| pm_chg_masked_write(chip, ovpreg, OVP_DEBOUNCE_TIME, 0x0); |
| usleep(10); |
| active_chg_plugged_in |
| = is_active_chg_plugged_in(chip, active_mask); |
| chg_gone = pm_chg_get_rt_status(chip, CHG_GONE_IRQ); |
| pr_debug("OVP FET count = %d chg_gone=%d, active_valid = %d\n", |
| count, chg_gone, active_chg_plugged_in); |
| |
| /* note usb_chg_plugged_in=0 => chg_gone=1 */ |
| if (chg_gone == 1 && active_chg_plugged_in == 1) { |
| pr_debug("since chg_gone = 1 dis ovp_fet for 20msec\n"); |
| turn_off_ovp_fet(chip, ovptestreg); |
| |
| msleep(20); |
| |
| turn_on_ovp_fet(chip, ovptestreg); |
| } else { |
| break; |
| } |
| } |
| pm_chg_masked_write(chip, ovpreg, OVP_DEBOUNCE_TIME, 0x2); |
| pr_debug("Exit count=%d chg_gone=%d, active_valid=%d\n", |
| count, chg_gone, active_chg_plugged_in); |
| return; |
| } |
| |
| static int find_usb_ma_value(int value) |
| { |
| int i; |
| |
| for (i = ARRAY_SIZE(usb_ma_table) - 1; i >= 0; i--) { |
| if (value >= usb_ma_table[i].usb_ma) |
| break; |
| } |
| |
| return i; |
| } |
| |
| static void decrease_usb_ma_value(int *value) |
| { |
| int i; |
| |
| if (value) { |
| i = find_usb_ma_value(*value); |
| if (i > 0) |
| i--; |
| while (!the_chip->iusb_fine_res && i > 0 |
| && (usb_ma_table[i].value & PM8917_IUSB_FINE_RES)) |
| i--; |
| *value = usb_ma_table[i].usb_ma; |
| } |
| } |
| |
| static void increase_usb_ma_value(int *value) |
| { |
| int i; |
| |
| if (value) { |
| i = find_usb_ma_value(*value); |
| |
| if (i < (ARRAY_SIZE(usb_ma_table) - 1)) |
| i++; |
| /* Get next correct entry if IUSB_FINE_RES is not available */ |
| while (!the_chip->iusb_fine_res |
| && (usb_ma_table[i].value & PM8917_IUSB_FINE_RES) |
| && i < (ARRAY_SIZE(usb_ma_table) - 1)) |
| i++; |
| |
| *value = usb_ma_table[i].usb_ma; |
| } |
| } |
| |
| static void vin_collapse_check_worker(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct pm8921_chg_chip *chip = container_of(dwork, |
| struct pm8921_chg_chip, vin_collapse_check_work); |
| |
| /* AICL only for wall-chargers */ |
| if (is_usb_chg_plugged_in(chip) && |
| usb_target_ma > USB_WALL_THRESHOLD_MA) { |
| /* decrease usb_target_ma */ |
| decrease_usb_ma_value(&usb_target_ma); |
| /* reset here, increase in unplug_check_worker */ |
| __pm8921_charger_vbus_draw(USB_WALL_THRESHOLD_MA); |
| pr_debug("usb_now=%d, usb_target = %d\n", |
| USB_WALL_THRESHOLD_MA, usb_target_ma); |
| } else { |
| handle_usb_insertion_removal(chip); |
| } |
| } |
| |
| #define VIN_MIN_COLLAPSE_CHECK_MS 50 |
| static irqreturn_t usbin_valid_irq_handler(int irq, void *data) |
| { |
| if (usb_target_ma) |
| schedule_delayed_work(&the_chip->vin_collapse_check_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (VIN_MIN_COLLAPSE_CHECK_MS))); |
| else |
| handle_usb_insertion_removal(data); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t usbin_ov_irq_handler(int irq, void *data) |
| { |
| pr_err("USB OverVoltage\n"); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t batt_inserted_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| int status; |
| |
| status = pm_chg_get_rt_status(chip, BATT_INSERTED_IRQ); |
| schedule_work(&chip->battery_id_valid_work); |
| handle_start_ext_chg(chip); |
| pr_debug("battery present=%d", status); |
| power_supply_changed(&chip->batt_psy); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * this interrupt used to restart charging a battery. |
| * |
| * Note: When DC-inserted the VBAT can't go low. |
| * VPH_PWR is provided by the ext-charger. |
| * After End-Of-Charging from DC, charging can be resumed only |
| * if DC is removed and then inserted after the battery was in use. |
| * Therefore the handle_start_ext_chg() is not called. |
| */ |
| static irqreturn_t vbatdet_low_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| int high_transition; |
| |
| high_transition = pm_chg_get_rt_status(chip, VBATDET_LOW_IRQ); |
| |
| if (high_transition) { |
| /* enable auto charging */ |
| pm_chg_auto_enable(chip, !charging_disabled); |
| pr_info("batt fell below resume voltage %s\n", |
| charging_disabled ? "" : "charger enabled"); |
| } |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| power_supply_changed(&chip->dc_psy); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t usbin_uv_irq_handler(int irq, void *data) |
| { |
| pr_err("USB UnderVoltage\n"); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t vbat_ov_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t chgwdog_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t vcp_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t atcdone_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t atcfail_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t chgdone_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| pr_debug("state_changed_to=%d\n", pm_chg_get_fsm_state(data)); |
| |
| handle_stop_ext_chg(chip); |
| |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| power_supply_changed(&chip->dc_psy); |
| |
| bms_notify_check(chip); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t chgfail_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| int ret; |
| |
| ret = pm_chg_failed_clear(chip, 1); |
| if (ret) |
| pr_err("Failed to write CHG_FAILED_CLEAR bit\n"); |
| |
| pr_err("batt_present = %d, batt_temp_ok = %d, state_changed_to=%d\n", |
| get_prop_batt_present(chip), |
| pm_chg_get_rt_status(chip, BAT_TEMP_OK_IRQ), |
| pm_chg_get_fsm_state(data)); |
| |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| power_supply_changed(&chip->dc_psy); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t chgstate_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| pr_debug("state_changed_to=%d\n", pm_chg_get_fsm_state(data)); |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| power_supply_changed(&chip->dc_psy); |
| |
| bms_notify_check(chip); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int param_vin_disable_counter = 5; |
| module_param(param_vin_disable_counter, int, 0644); |
| |
| static void attempt_reverse_boost_fix(struct pm8921_chg_chip *chip, |
| int count, int usb_ma) |
| { |
| if (usb_ma) |
| __pm8921_charger_vbus_draw(500); |
| pr_debug("count = %d iusb=500mA\n", count); |
| disable_input_voltage_regulation(chip); |
| pr_debug("count = %d disable_input_regulation\n", count); |
| |
| msleep(20); |
| |
| pr_debug("count = %d end sleep 20ms chg_gone=%d, usb_valid = %d\n", |
| count, |
| pm_chg_get_rt_status(chip, CHG_GONE_IRQ), |
| is_usb_chg_plugged_in(chip)); |
| pr_debug("count = %d restoring input regulation and usb_ma = %d\n", |
| count, usb_ma); |
| enable_input_voltage_regulation(chip); |
| if (usb_ma) |
| __pm8921_charger_vbus_draw(usb_ma); |
| } |
| |
| #define VIN_ACTIVE_BIT BIT(0) |
| #define UNPLUG_WRKARND_RESTORE_WAIT_PERIOD_US 200 |
| #define VIN_MIN_INCREASE_MV 100 |
| static void unplug_check_worker(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct pm8921_chg_chip *chip = container_of(dwork, |
| struct pm8921_chg_chip, unplug_check_work); |
| u8 reg_loop, active_path; |
| int rc, ibat, active_chg_plugged_in, usb_ma; |
| int chg_gone = 0; |
| |
| reg_loop = 0; |
| |
| rc = pm8xxx_readb(chip->dev->parent, PBL_ACCESS1, &active_path); |
| if (rc) { |
| pr_err("Failed to read PBL_ACCESS1 rc=%d\n", rc); |
| return; |
| } |
| chip->active_path = active_path; |
| |
| active_chg_plugged_in = is_active_chg_plugged_in(chip, active_path); |
| pr_debug("active_path = 0x%x, active_chg_plugged_in = %d\n", |
| active_path, active_chg_plugged_in); |
| if (active_path & USB_ACTIVE_BIT) { |
| pr_debug("USB charger active\n"); |
| |
| pm_chg_iusbmax_get(chip, &usb_ma); |
| if (usb_ma == 500 && !usb_target_ma) { |
| pr_debug("Stopping Unplug Check Worker USB == 500mA\n"); |
| disable_input_voltage_regulation(chip); |
| return; |
| } |
| |
| if (usb_ma <= 100) { |
| pr_debug( |
| "Unenumerated or suspended usb_ma = %d skip\n", |
| usb_ma); |
| goto check_again_later; |
| } |
| } else if (active_path & DC_ACTIVE_BIT) { |
| pr_debug("DC charger active\n"); |
| /* Some board designs are not prone to reverse boost on DC |
| * charging path */ |
| if (!chip->dc_unplug_check) |
| return; |
| } else { |
| /* No charger active */ |
| if (!(is_usb_chg_plugged_in(chip) |
| && !(is_dc_chg_plugged_in(chip)))) { |
| pr_debug( |
| "Stop: chg removed reg_loop = %d, fsm = %d ibat = %d\n", |
| pm_chg_get_regulation_loop(chip), |
| pm_chg_get_fsm_state(chip), |
| get_prop_batt_current(chip) |
| ); |
| return; |
| } else { |
| goto check_again_later; |
| } |
| } |
| |
| if (active_path & USB_ACTIVE_BIT) { |
| reg_loop = pm_chg_get_regulation_loop(chip); |
| pr_debug("reg_loop=0x%x usb_ma = %d\n", reg_loop, usb_ma); |
| if ((reg_loop & VIN_ACTIVE_BIT) && |
| (usb_ma > USB_WALL_THRESHOLD_MA) |
| && !charging_disabled) { |
| decrease_usb_ma_value(&usb_ma); |
| usb_target_ma = usb_ma; |
| /* end AICL here */ |
| __pm8921_charger_vbus_draw(usb_ma); |
| pr_debug("usb_now=%d, usb_target = %d\n", |
| usb_ma, usb_target_ma); |
| } |
| } |
| |
| reg_loop = pm_chg_get_regulation_loop(chip); |
| pr_debug("reg_loop=0x%x usb_ma = %d\n", reg_loop, usb_ma); |
| |
| ibat = get_prop_batt_current(chip); |
| if (reg_loop & VIN_ACTIVE_BIT) { |
| pr_debug("ibat = %d fsm = %d reg_loop = 0x%x\n", |
| ibat, pm_chg_get_fsm_state(chip), reg_loop); |
| if (ibat > 0) { |
| int count = 0; |
| |
| while (count++ < param_vin_disable_counter |
| && active_chg_plugged_in == 1) { |
| if (active_path & USB_ACTIVE_BIT) |
| attempt_reverse_boost_fix(chip, |
| count, usb_ma); |
| else |
| attempt_reverse_boost_fix(chip, |
| count, 0); |
| /* after reverse boost fix check if the active |
| * charger was detected as removed */ |
| active_chg_plugged_in |
| = is_active_chg_plugged_in(chip, |
| active_path); |
| pr_debug("active_chg_plugged_in = %d\n", |
| active_chg_plugged_in); |
| } |
| } |
| } |
| |
| active_chg_plugged_in = is_active_chg_plugged_in(chip, active_path); |
| pr_debug("active_path = 0x%x, active_chg = %d\n", |
| active_path, active_chg_plugged_in); |
| chg_gone = pm_chg_get_rt_status(chip, CHG_GONE_IRQ); |
| |
| if (chg_gone == 1 && active_chg_plugged_in == 1) { |
| pr_debug("chg_gone=%d, active_chg_plugged_in = %d\n", |
| chg_gone, active_chg_plugged_in); |
| unplug_ovp_fet_open(chip); |
| } |
| |
| if (!(reg_loop & VIN_ACTIVE_BIT) && (active_path & USB_ACTIVE_BIT) |
| && !charging_disabled) { |
| /* only increase iusb_max if vin loop not active */ |
| if (usb_ma < usb_target_ma) { |
| increase_usb_ma_value(&usb_ma); |
| __pm8921_charger_vbus_draw(usb_ma); |
| pr_debug("usb_now=%d, usb_target = %d\n", |
| usb_ma, usb_target_ma); |
| } else { |
| usb_target_ma = usb_ma; |
| } |
| } |
| check_again_later: |
| /* schedule to check again later */ |
| schedule_delayed_work(&chip->unplug_check_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (UNPLUG_CHECK_WAIT_PERIOD_MS))); |
| } |
| |
| static irqreturn_t loop_change_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| pr_debug("fsm_state=%d reg_loop=0x%x\n", |
| pm_chg_get_fsm_state(data), |
| pm_chg_get_regulation_loop(data)); |
| schedule_work(&chip->unplug_check_work.work); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t fastchg_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| int high_transition; |
| |
| high_transition = pm_chg_get_rt_status(chip, FASTCHG_IRQ); |
| if (high_transition && !delayed_work_pending(&chip->eoc_work)) { |
| wake_lock(&chip->eoc_wake_lock); |
| schedule_delayed_work(&chip->eoc_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (EOC_CHECK_PERIOD_MS))); |
| } |
| power_supply_changed(&chip->batt_psy); |
| bms_notify_check(chip); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t trklchg_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| power_supply_changed(&chip->batt_psy); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t batt_removed_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| int status; |
| |
| status = pm_chg_get_rt_status(chip, BATT_REMOVED_IRQ); |
| pr_debug("battery present=%d state=%d", !status, |
| pm_chg_get_fsm_state(data)); |
| handle_stop_ext_chg(chip); |
| power_supply_changed(&chip->batt_psy); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t batttemp_hot_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| handle_stop_ext_chg(chip); |
| power_supply_changed(&chip->batt_psy); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t chghot_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| pr_debug("Chg hot fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| handle_stop_ext_chg(chip); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t batttemp_cold_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| pr_debug("Batt cold fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| handle_stop_ext_chg(chip); |
| |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t chg_gone_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| int chg_gone, usb_chg_plugged_in; |
| |
| usb_chg_plugged_in = is_usb_chg_plugged_in(chip); |
| chg_gone = pm_chg_get_rt_status(chip, CHG_GONE_IRQ); |
| |
| pr_debug("chg_gone=%d, usb_valid = %d\n", chg_gone, usb_chg_plugged_in); |
| pr_debug("Chg gone fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| return IRQ_HANDLED; |
| } |
| /* |
| * |
| * bat_temp_ok_irq_handler - is edge triggered, hence it will |
| * fire for two cases: |
| * |
| * If the interrupt line switches to high temperature is okay |
| * and thus charging begins. |
| * If bat_temp_ok is low this means the temperature is now |
| * too hot or cold, so charging is stopped. |
| * |
| */ |
| static irqreturn_t bat_temp_ok_irq_handler(int irq, void *data) |
| { |
| int bat_temp_ok; |
| struct pm8921_chg_chip *chip = data; |
| |
| bat_temp_ok = pm_chg_get_rt_status(chip, BAT_TEMP_OK_IRQ); |
| |
| pr_debug("batt_temp_ok = %d fsm_state%d\n", |
| bat_temp_ok, pm_chg_get_fsm_state(data)); |
| |
| if (bat_temp_ok) |
| handle_start_ext_chg(chip); |
| else |
| handle_stop_ext_chg(chip); |
| |
| power_supply_changed(&chip->batt_psy); |
| power_supply_changed(&chip->usb_psy); |
| bms_notify_check(chip); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t coarse_det_low_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t vdd_loop_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t vreg_ov_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t vbatdet_irq_handler(int irq, void *data) |
| { |
| pr_debug("fsm_state=%d\n", pm_chg_get_fsm_state(data)); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t batfet_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| pr_debug("vreg ov\n"); |
| power_supply_changed(&chip->batt_psy); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dcin_valid_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| int dc_present; |
| |
| dc_present = pm_chg_get_rt_status(chip, DCIN_VALID_IRQ); |
| if (chip->ext_psy) |
| power_supply_set_online(chip->ext_psy, dc_present); |
| chip->dc_present = dc_present; |
| if (dc_present) |
| handle_start_ext_chg(chip); |
| else |
| handle_stop_ext_chg(chip); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dcin_ov_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| handle_stop_ext_chg(chip); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t dcin_uv_irq_handler(int irq, void *data) |
| { |
| struct pm8921_chg_chip *chip = data; |
| |
| handle_stop_ext_chg(chip); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __pm_batt_external_power_changed_work(struct device *dev, void *data) |
| { |
| struct power_supply *psy = &the_chip->batt_psy; |
| struct power_supply *epsy = dev_get_drvdata(dev); |
| int i, dcin_irq; |
| |
| /* Only search for external supply if none is registered */ |
| if (!the_chip->ext_psy) { |
| dcin_irq = the_chip->pmic_chg_irq[DCIN_VALID_IRQ]; |
| for (i = 0; i < epsy->num_supplicants; i++) { |
| if (!strncmp(epsy->supplied_to[i], psy->name, 7)) { |
| if (!strncmp(epsy->name, "dc", 2)) { |
| the_chip->ext_psy = epsy; |
| dcin_valid_irq_handler(dcin_irq, |
| the_chip); |
| } |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static void pm_batt_external_power_changed(struct power_supply *psy) |
| { |
| /* Only look for an external supply if it hasn't been registered */ |
| if (!the_chip->ext_psy) |
| class_for_each_device(power_supply_class, NULL, psy, |
| __pm_batt_external_power_changed_work); |
| } |
| |
| /** |
| * update_heartbeat - internal function to update userspace |
| * per update_time minutes |
| * |
| */ |
| #define LOW_SOC_HEARTBEAT_MS 20000 |
| static void update_heartbeat(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct pm8921_chg_chip *chip = container_of(dwork, |
| struct pm8921_chg_chip, update_heartbeat_work); |
| |
| pm_chg_failed_clear(chip, 1); |
| power_supply_changed(&chip->batt_psy); |
| if (chip->recent_reported_soc <= 20) |
| schedule_delayed_work(&chip->update_heartbeat_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (LOW_SOC_HEARTBEAT_MS))); |
| else |
| schedule_delayed_work(&chip->update_heartbeat_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (chip->update_time))); |
| } |
| #define VDD_LOOP_ACTIVE_BIT BIT(3) |
| #define VDD_MAX_INCREASE_MV 400 |
| static int vdd_max_increase_mv = VDD_MAX_INCREASE_MV; |
| module_param(vdd_max_increase_mv, int, 0644); |
| |
| static int ichg_threshold_ua = -400000; |
| module_param(ichg_threshold_ua, int, 0644); |
| |
| #define PM8921_CHG_VDDMAX_RES_MV 10 |
| static void adjust_vdd_max_for_fastchg(struct pm8921_chg_chip *chip) |
| { |
| int ichg_meas_ua, vbat_uv; |
| int ichg_meas_ma; |
| int adj_vdd_max_mv, programmed_vdd_max; |
| int vbat_batt_terminal_uv; |
| int vbat_batt_terminal_mv; |
| int reg_loop; |
| int delta_mv = 0; |
| |
| if (chip->rconn_mohm == 0) { |
| pr_debug("Exiting as rconn_mohm is 0\n"); |
| return; |
| } |
| /* adjust vdd_max only in normal temperature zone */ |
| if (chip->is_bat_cool || chip->is_bat_warm) { |
| pr_debug("Exiting is_bat_cool = %d is_batt_warm = %d\n", |
| chip->is_bat_cool, chip->is_bat_warm); |
| return; |
| } |
| |
| reg_loop = pm_chg_get_regulation_loop(chip); |
| if (!(reg_loop & VDD_LOOP_ACTIVE_BIT)) { |
| pr_debug("Exiting Vdd loop is not active reg loop=0x%x\n", |
| reg_loop); |
| return; |
| } |
| |
| pm8921_bms_get_simultaneous_battery_voltage_and_current(&ichg_meas_ua, |
| &vbat_uv); |
| if (ichg_meas_ua >= 0) { |
| pr_debug("Exiting ichg_meas_ua = %d > 0\n", ichg_meas_ua); |
| return; |
| } |
| |
| ichg_meas_ma = ichg_meas_ua / 1000; |
| |
| /* rconn_mohm is in milliOhms */ |
| vbat_batt_terminal_uv = vbat_uv + ichg_meas_ma * the_chip->rconn_mohm; |
| vbat_batt_terminal_mv = vbat_batt_terminal_uv/1000; |
| pm_chg_vddmax_get(the_chip, &programmed_vdd_max); |
| |
| delta_mv = chip->max_voltage_mv - vbat_batt_terminal_mv; |
| |
| adj_vdd_max_mv = programmed_vdd_max + delta_mv; |
| pr_debug("vdd_max needs to be changed by %d mv from %d to %d\n", |
| delta_mv, |
| programmed_vdd_max, |
| adj_vdd_max_mv); |
| |
| if (adj_vdd_max_mv < chip->max_voltage_mv) { |
| pr_debug("adj vdd_max lower than default max voltage\n"); |
| return; |
| } |
| |
| adj_vdd_max_mv = DIV_ROUND_UP(adj_vdd_max_mv, PM8921_CHG_VDDMAX_RES_MV) |
| * PM8921_CHG_VDDMAX_RES_MV; |
| |
| if (adj_vdd_max_mv > (chip->max_voltage_mv + vdd_max_increase_mv)) |
| adj_vdd_max_mv = chip->max_voltage_mv + vdd_max_increase_mv; |
| pr_debug("adjusting vdd_max_mv to %d to make " |
| "vbat_batt_termial_uv = %d to %d\n", |
| adj_vdd_max_mv, vbat_batt_terminal_uv, chip->max_voltage_mv); |
| pm_chg_vddmax_set(chip, adj_vdd_max_mv); |
| } |
| |
| enum { |
| CHG_IN_PROGRESS, |
| CHG_NOT_IN_PROGRESS, |
| CHG_FINISHED, |
| }; |
| |
| #define VBAT_TOLERANCE_MV 70 |
| #define CHG_DISABLE_MSLEEP 100 |
| static int is_charging_finished(struct pm8921_chg_chip *chip) |
| { |
| int vbat_meas_uv, vbat_meas_mv, vbat_programmed, vbatdet_low; |
| int ichg_meas_ma, iterm_programmed; |
| int regulation_loop, fast_chg, vcp; |
| int rc; |
| static int last_vbat_programmed = -EINVAL; |
| |
| if (!is_ext_charging(chip)) { |
| /* return if the battery is not being fastcharged */ |
| fast_chg = pm_chg_get_rt_status(chip, FASTCHG_IRQ); |
| pr_debug("fast_chg = %d\n", fast_chg); |
| if (fast_chg == 0) |
| return CHG_NOT_IN_PROGRESS; |
| |
| vcp = pm_chg_get_rt_status(chip, VCP_IRQ); |
| pr_debug("vcp = %d\n", vcp); |
| if (vcp == 1) |
| return CHG_IN_PROGRESS; |
| |
| vbatdet_low = pm_chg_get_rt_status(chip, VBATDET_LOW_IRQ); |
| pr_debug("vbatdet_low = %d\n", vbatdet_low); |
| if (vbatdet_low == 1) |
| return CHG_IN_PROGRESS; |
| |
| /* reset count if battery is hot/cold */ |
| rc = pm_chg_get_rt_status(chip, BAT_TEMP_OK_IRQ); |
| pr_debug("batt_temp_ok = %d\n", rc); |
| if (rc == 0) |
| return CHG_IN_PROGRESS; |
| |
| /* reset count if battery voltage is less than vddmax */ |
| vbat_meas_uv = get_prop_battery_uvolts(chip); |
| if (vbat_meas_uv < 0) |
| return CHG_IN_PROGRESS; |
| vbat_meas_mv = vbat_meas_uv / 1000; |
| |
| rc = pm_chg_vddmax_get(chip, &vbat_programmed); |
| if (rc) { |
| pr_err("couldnt read vddmax rc = %d\n", rc); |
| return CHG_IN_PROGRESS; |
| } |
| pr_debug("vddmax = %d vbat_meas_mv=%d\n", |
| vbat_programmed, vbat_meas_mv); |
| |
| if (last_vbat_programmed == -EINVAL) |
| last_vbat_programmed = vbat_programmed; |
| if (last_vbat_programmed != vbat_programmed) { |
| /* vddmax changed, reset and check again */ |
| pr_debug("vddmax = %d last_vdd_max=%d\n", |
| vbat_programmed, last_vbat_programmed); |
| last_vbat_programmed = vbat_programmed; |
| return CHG_IN_PROGRESS; |
| } |
| |
| regulation_loop = pm_chg_get_regulation_loop(chip); |
| if (regulation_loop < 0) { |
| pr_err("couldnt read the regulation loop err=%d\n", |
| regulation_loop); |
| return CHG_IN_PROGRESS; |
| } |
| pr_debug("regulation_loop=%d\n", regulation_loop); |
| |
| if (regulation_loop != 0 && regulation_loop != VDD_LOOP) |
| return CHG_IN_PROGRESS; |
| } /* !is_ext_charging */ |
| |
| /* reset count if battery chg current is more than iterm */ |
| rc = pm_chg_iterm_get(chip, &iterm_programmed); |
| if (rc) { |
| pr_err("couldnt read iterm rc = %d\n", rc); |
| return CHG_IN_PROGRESS; |
| } |
| |
| ichg_meas_ma = (get_prop_batt_current(chip)) / 1000; |
| pr_debug("iterm_programmed = %d ichg_meas_ma=%d\n", |
| iterm_programmed, ichg_meas_ma); |
| /* |
| * ichg_meas_ma < 0 means battery is drawing current |
| * ichg_meas_ma > 0 means battery is providing current |
| */ |
| if (ichg_meas_ma > 0) |
| return CHG_IN_PROGRESS; |
| |
| if (ichg_meas_ma * -1 > iterm_programmed) |
| return CHG_IN_PROGRESS; |
| |
| return CHG_FINISHED; |
| } |
| |
| /** |
| * eoc_worker - internal function to check if battery EOC |
| * has happened |
| * |
| * If all conditions favouring, if the charge current is |
| * less than the term current for three consecutive times |
| * an EOC has happened. |
| * The wakelock is released if there is no need to reshedule |
| * - this happens when the battery is removed or EOC has |
| * happened |
| */ |
| #define CONSECUTIVE_COUNT 3 |
| static void eoc_worker(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct pm8921_chg_chip *chip = container_of(dwork, |
| struct pm8921_chg_chip, eoc_work); |
| static int count; |
| int end; |
| |
| pm_chg_failed_clear(chip, 1); |
| end = is_charging_finished(chip); |
| |
| if (end == CHG_NOT_IN_PROGRESS) { |
| count = 0; |
| wake_unlock(&chip->eoc_wake_lock); |
| return; |
| } |
| |
| if (end == CHG_FINISHED) { |
| count++; |
| } else { |
| count = 0; |
| } |
| |
| if (count == CONSECUTIVE_COUNT) { |
| count = 0; |
| pr_info("End of Charging\n"); |
| |
| pm_chg_auto_enable(chip, 0); |
| |
| if (is_ext_charging(chip)) |
| chip->ext_charge_done = true; |
| |
| if (chip->is_bat_warm || chip->is_bat_cool) |
| chip->bms_notify.is_battery_full = 0; |
| else |
| chip->bms_notify.is_battery_full = 1; |
| /* declare end of charging by invoking chgdone interrupt */ |
| chgdone_irq_handler(chip->pmic_chg_irq[CHGDONE_IRQ], chip); |
| wake_unlock(&chip->eoc_wake_lock); |
| } else { |
| adjust_vdd_max_for_fastchg(chip); |
| pr_debug("EOC count = %d\n", count); |
| schedule_delayed_work(&chip->eoc_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (EOC_CHECK_PERIOD_MS))); |
| } |
| } |
| |
| static void btm_configure_work(struct work_struct *work) |
| { |
| int rc; |
| |
| rc = pm8xxx_adc_btm_configure(&btm_config); |
| if (rc) |
| pr_err("failed to configure btm rc=%d", rc); |
| } |
| |
| DECLARE_WORK(btm_config_work, btm_configure_work); |
| |
| static void set_appropriate_battery_current(struct pm8921_chg_chip *chip) |
| { |
| unsigned int chg_current = chip->max_bat_chg_current; |
| |
| if (chip->is_bat_cool) |
| chg_current = min(chg_current, chip->cool_bat_chg_current); |
| |
| if (chip->is_bat_warm) |
| chg_current = min(chg_current, chip->warm_bat_chg_current); |
| |
| if (thermal_mitigation != 0 && chip->thermal_mitigation) |
| chg_current = min(chg_current, |
| chip->thermal_mitigation[thermal_mitigation]); |
| |
| pm_chg_ibatmax_set(the_chip, chg_current); |
| } |
| |
| #define TEMP_HYSTERISIS_DEGC 2 |
| static void battery_cool(bool enter) |
| { |
| pr_debug("enter = %d\n", enter); |
| if (enter == the_chip->is_bat_cool) |
| return; |
| the_chip->is_bat_cool = enter; |
| if (enter) { |
| btm_config.low_thr_temp = |
| the_chip->cool_temp_dc + TEMP_HYSTERISIS_DEGC; |
| set_appropriate_battery_current(the_chip); |
| pm_chg_vddmax_set(the_chip, the_chip->cool_bat_voltage); |
| pm_chg_vbatdet_set(the_chip, |
| the_chip->cool_bat_voltage |
| - the_chip->resume_voltage_delta); |
| } else { |
| btm_config.low_thr_temp = the_chip->cool_temp_dc; |
| set_appropriate_battery_current(the_chip); |
| pm_chg_vddmax_set(the_chip, the_chip->max_voltage_mv); |
| pm_chg_vbatdet_set(the_chip, |
| the_chip->max_voltage_mv |
| - the_chip->resume_voltage_delta); |
| } |
| schedule_work(&btm_config_work); |
| } |
| |
| static void battery_warm(bool enter) |
| { |
| pr_debug("enter = %d\n", enter); |
| if (enter == the_chip->is_bat_warm) |
| return; |
| the_chip->is_bat_warm = enter; |
| if (enter) { |
| btm_config.high_thr_temp = |
| the_chip->warm_temp_dc - TEMP_HYSTERISIS_DEGC; |
| set_appropriate_battery_current(the_chip); |
| pm_chg_vddmax_set(the_chip, the_chip->warm_bat_voltage); |
| pm_chg_vbatdet_set(the_chip, |
| the_chip->warm_bat_voltage |
| - the_chip->resume_voltage_delta); |
| } else { |
| btm_config.high_thr_temp = the_chip->warm_temp_dc; |
| set_appropriate_battery_current(the_chip); |
| pm_chg_vddmax_set(the_chip, the_chip->max_voltage_mv); |
| pm_chg_vbatdet_set(the_chip, |
| the_chip->max_voltage_mv |
| - the_chip->resume_voltage_delta); |
| } |
| schedule_work(&btm_config_work); |
| } |
| |
| static int configure_btm(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| |
| if (chip->warm_temp_dc != INT_MIN) |
| btm_config.btm_warm_fn = battery_warm; |
| else |
| btm_config.btm_warm_fn = NULL; |
| |
| if (chip->cool_temp_dc != INT_MIN) |
| btm_config.btm_cool_fn = battery_cool; |
| else |
| btm_config.btm_cool_fn = NULL; |
| |
| btm_config.low_thr_temp = chip->cool_temp_dc; |
| btm_config.high_thr_temp = chip->warm_temp_dc; |
| btm_config.interval = chip->temp_check_period; |
| rc = pm8xxx_adc_btm_configure(&btm_config); |
| if (rc) |
| pr_err("failed to configure btm rc = %d\n", rc); |
| rc = pm8xxx_adc_btm_start(); |
| if (rc) |
| pr_err("failed to start btm rc = %d\n", rc); |
| |
| return rc; |
| } |
| |
| /** |
| * set_disable_status_param - |
| * |
| * Internal function to disable battery charging and also disable drawing |
| * any current from the source. The device is forced to run on a battery |
| * after this. |
| */ |
| static int set_disable_status_param(const char *val, struct kernel_param *kp) |
| { |
| int ret; |
| struct pm8921_chg_chip *chip = the_chip; |
| |
| ret = param_set_int(val, kp); |
| if (ret) { |
| pr_err("error setting value %d\n", ret); |
| return ret; |
| } |
| pr_info("factory set disable param to %d\n", charging_disabled); |
| if (chip) { |
| pm_chg_auto_enable(chip, !charging_disabled); |
| pm_chg_charge_dis(chip, charging_disabled); |
| } |
| return 0; |
| } |
| module_param_call(disabled, set_disable_status_param, param_get_uint, |
| &charging_disabled, 0644); |
| |
| static int rconn_mohm; |
| static int set_rconn_mohm(const char *val, struct kernel_param *kp) |
| { |
| int ret; |
| struct pm8921_chg_chip *chip = the_chip; |
| |
| ret = param_set_int(val, kp); |
| if (ret) { |
| pr_err("error setting value %d\n", ret); |
| return ret; |
| } |
| if (chip) |
| chip->rconn_mohm = rconn_mohm; |
| return 0; |
| } |
| module_param_call(rconn_mohm, set_rconn_mohm, param_get_uint, |
| &rconn_mohm, 0644); |
| /** |
| * set_thermal_mitigation_level - |
| * |
| * Internal function to control battery charging current to reduce |
| * temperature |
| */ |
| static int set_therm_mitigation_level(const char *val, struct kernel_param *kp) |
| { |
| int ret; |
| struct pm8921_chg_chip *chip = the_chip; |
| |
| ret = param_set_int(val, kp); |
| if (ret) { |
| pr_err("error setting value %d\n", ret); |
| return ret; |
| } |
| |
| if (!chip) { |
| pr_err("called before init\n"); |
| return -EINVAL; |
| } |
| |
| if (!chip->thermal_mitigation) { |
| pr_err("no thermal mitigation\n"); |
| return -EINVAL; |
| } |
| |
| if (thermal_mitigation < 0 |
| || thermal_mitigation >= chip->thermal_levels) { |
| pr_err("out of bound level selected\n"); |
| return -EINVAL; |
| } |
| |
| set_appropriate_battery_current(chip); |
| return ret; |
| } |
| module_param_call(thermal_mitigation, set_therm_mitigation_level, |
| param_get_uint, |
| &thermal_mitigation, 0644); |
| |
| static int set_usb_max_current(const char *val, struct kernel_param *kp) |
| { |
| int ret, mA; |
| struct pm8921_chg_chip *chip = the_chip; |
| |
| ret = param_set_int(val, kp); |
| if (ret) { |
| pr_err("error setting value %d\n", ret); |
| return ret; |
| } |
| if (chip) { |
| pr_warn("setting current max to %d\n", usb_max_current); |
| pm_chg_iusbmax_get(chip, &mA); |
| if (mA > usb_max_current) |
| pm8921_charger_vbus_draw(usb_max_current); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| module_param_call(usb_max_current, set_usb_max_current, |
| param_get_uint, &usb_max_current, 0644); |
| |
| static void free_irqs(struct pm8921_chg_chip *chip) |
| { |
| int i; |
| |
| for (i = 0; i < PM_CHG_MAX_INTS; i++) |
| if (chip->pmic_chg_irq[i]) { |
| free_irq(chip->pmic_chg_irq[i], chip); |
| chip->pmic_chg_irq[i] = 0; |
| } |
| } |
| |
| /* determines the initial present states */ |
| static void __devinit determine_initial_state(struct pm8921_chg_chip *chip) |
| { |
| unsigned long flags; |
| int fsm_state; |
| |
| chip->dc_present = !!is_dc_chg_plugged_in(chip); |
| chip->usb_present = !!is_usb_chg_plugged_in(chip); |
| |
| notify_usb_of_the_plugin_event(chip->usb_present); |
| if (chip->usb_present) { |
| schedule_delayed_work(&chip->unplug_check_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (UNPLUG_CHECK_WAIT_PERIOD_MS))); |
| pm8921_chg_enable_irq(chip, CHG_GONE_IRQ); |
| } |
| |
| pm8921_chg_enable_irq(chip, DCIN_VALID_IRQ); |
| pm8921_chg_enable_irq(chip, USBIN_VALID_IRQ); |
| pm8921_chg_enable_irq(chip, BATT_REMOVED_IRQ); |
| pm8921_chg_enable_irq(chip, BATT_INSERTED_IRQ); |
| pm8921_chg_enable_irq(chip, USBIN_OV_IRQ); |
| pm8921_chg_enable_irq(chip, USBIN_UV_IRQ); |
| pm8921_chg_enable_irq(chip, DCIN_OV_IRQ); |
| pm8921_chg_enable_irq(chip, DCIN_UV_IRQ); |
| pm8921_chg_enable_irq(chip, CHGFAIL_IRQ); |
| pm8921_chg_enable_irq(chip, FASTCHG_IRQ); |
| pm8921_chg_enable_irq(chip, VBATDET_LOW_IRQ); |
| pm8921_chg_enable_irq(chip, BAT_TEMP_OK_IRQ); |
| |
| spin_lock_irqsave(&vbus_lock, flags); |
| if (usb_chg_current) { |
| /* reissue a vbus draw call */ |
| __pm8921_charger_vbus_draw(usb_chg_current); |
| fastchg_irq_handler(chip->pmic_chg_irq[FASTCHG_IRQ], chip); |
| } |
| spin_unlock_irqrestore(&vbus_lock, flags); |
| |
| fsm_state = pm_chg_get_fsm_state(chip); |
| if (is_battery_charging(fsm_state)) { |
| chip->bms_notify.is_charging = 1; |
| pm8921_bms_charging_began(); |
| } |
| |
| check_battery_valid(chip); |
| |
| pr_debug("usb = %d, dc = %d batt = %d state=%d\n", |
| chip->usb_present, |
| chip->dc_present, |
| get_prop_batt_present(chip), |
| fsm_state); |
| } |
| |
| struct pm_chg_irq_init_data { |
| unsigned int irq_id; |
| char *name; |
| unsigned long flags; |
| irqreturn_t (*handler)(int, void *); |
| }; |
| |
| #define CHG_IRQ(_id, _flags, _handler) \ |
| { \ |
| .irq_id = _id, \ |
| .name = #_id, \ |
| .flags = _flags, \ |
| .handler = _handler, \ |
| } |
| struct pm_chg_irq_init_data chg_irq_data[] = { |
| CHG_IRQ(USBIN_VALID_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| usbin_valid_irq_handler), |
| CHG_IRQ(USBIN_OV_IRQ, IRQF_TRIGGER_RISING, usbin_ov_irq_handler), |
| CHG_IRQ(BATT_INSERTED_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| batt_inserted_irq_handler), |
| CHG_IRQ(VBATDET_LOW_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| vbatdet_low_irq_handler), |
| CHG_IRQ(USBIN_UV_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| usbin_uv_irq_handler), |
| CHG_IRQ(VBAT_OV_IRQ, IRQF_TRIGGER_RISING, vbat_ov_irq_handler), |
| CHG_IRQ(CHGWDOG_IRQ, IRQF_TRIGGER_RISING, chgwdog_irq_handler), |
| CHG_IRQ(VCP_IRQ, IRQF_TRIGGER_RISING, vcp_irq_handler), |
| CHG_IRQ(ATCDONE_IRQ, IRQF_TRIGGER_RISING, atcdone_irq_handler), |
| CHG_IRQ(ATCFAIL_IRQ, IRQF_TRIGGER_RISING, atcfail_irq_handler), |
| CHG_IRQ(CHGDONE_IRQ, IRQF_TRIGGER_RISING, chgdone_irq_handler), |
| CHG_IRQ(CHGFAIL_IRQ, IRQF_TRIGGER_RISING, chgfail_irq_handler), |
| CHG_IRQ(CHGSTATE_IRQ, IRQF_TRIGGER_RISING, chgstate_irq_handler), |
| CHG_IRQ(LOOP_CHANGE_IRQ, IRQF_TRIGGER_RISING, loop_change_irq_handler), |
| CHG_IRQ(FASTCHG_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| fastchg_irq_handler), |
| CHG_IRQ(TRKLCHG_IRQ, IRQF_TRIGGER_RISING, trklchg_irq_handler), |
| CHG_IRQ(BATT_REMOVED_IRQ, IRQF_TRIGGER_RISING, |
| batt_removed_irq_handler), |
| CHG_IRQ(BATTTEMP_HOT_IRQ, IRQF_TRIGGER_RISING, |
| batttemp_hot_irq_handler), |
| CHG_IRQ(CHGHOT_IRQ, IRQF_TRIGGER_RISING, chghot_irq_handler), |
| CHG_IRQ(BATTTEMP_COLD_IRQ, IRQF_TRIGGER_RISING, |
| batttemp_cold_irq_handler), |
| CHG_IRQ(CHG_GONE_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| chg_gone_irq_handler), |
| CHG_IRQ(BAT_TEMP_OK_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| bat_temp_ok_irq_handler), |
| CHG_IRQ(COARSE_DET_LOW_IRQ, IRQF_TRIGGER_RISING, |
| coarse_det_low_irq_handler), |
| CHG_IRQ(VDD_LOOP_IRQ, IRQF_TRIGGER_RISING, vdd_loop_irq_handler), |
| CHG_IRQ(VREG_OV_IRQ, IRQF_TRIGGER_RISING, vreg_ov_irq_handler), |
| CHG_IRQ(VBATDET_IRQ, IRQF_TRIGGER_RISING, vbatdet_irq_handler), |
| CHG_IRQ(BATFET_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| batfet_irq_handler), |
| CHG_IRQ(DCIN_VALID_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| dcin_valid_irq_handler), |
| CHG_IRQ(DCIN_OV_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, |
| dcin_ov_irq_handler), |
| CHG_IRQ(DCIN_UV_IRQ, IRQF_TRIGGER_RISING, dcin_uv_irq_handler), |
| }; |
| |
| static int __devinit request_irqs(struct pm8921_chg_chip *chip, |
| struct platform_device *pdev) |
| { |
| struct resource *res; |
| int ret, i; |
| |
| ret = 0; |
| bitmap_fill(chip->enabled_irqs, PM_CHG_MAX_INTS); |
| |
| for (i = 0; i < ARRAY_SIZE(chg_irq_data); i++) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, |
| chg_irq_data[i].name); |
| if (res == NULL) { |
| pr_err("couldn't find %s\n", chg_irq_data[i].name); |
| goto err_out; |
| } |
| chip->pmic_chg_irq[chg_irq_data[i].irq_id] = res->start; |
| ret = request_irq(res->start, chg_irq_data[i].handler, |
| chg_irq_data[i].flags, |
| chg_irq_data[i].name, chip); |
| if (ret < 0) { |
| pr_err("couldn't request %d (%s) %d\n", res->start, |
| chg_irq_data[i].name, ret); |
| chip->pmic_chg_irq[chg_irq_data[i].irq_id] = 0; |
| goto err_out; |
| } |
| pm8921_chg_disable_irq(chip, chg_irq_data[i].irq_id); |
| } |
| return 0; |
| |
| err_out: |
| free_irqs(chip); |
| return -EINVAL; |
| } |
| |
| static void pm8921_chg_force_19p2mhz_clk(struct pm8921_chg_chip *chip) |
| { |
| int err; |
| u8 temp; |
| |
| temp = 0xD1; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| |
| temp = 0xD3; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| |
| temp = 0xD1; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| |
| temp = 0xD5; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| |
| udelay(183); |
| |
| temp = 0xD1; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| |
| temp = 0xD0; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| udelay(32); |
| |
| temp = 0xD1; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| |
| temp = 0xD3; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| } |
| |
| static void pm8921_chg_set_hw_clk_switching(struct pm8921_chg_chip *chip) |
| { |
| int err; |
| u8 temp; |
| |
| temp = 0xD1; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| |
| temp = 0xD0; |
| err = pm8xxx_writeb(chip->dev->parent, CHG_TEST, temp); |
| if (err) { |
| pr_err("Error %d writing %d to addr %d\n", err, temp, CHG_TEST); |
| return; |
| } |
| } |
| |
| #define VREF_BATT_THERM_FORCE_ON BIT(7) |
| static void detect_battery_removal(struct pm8921_chg_chip *chip) |
| { |
| u8 temp; |
| |
| pm8xxx_readb(chip->dev->parent, CHG_CNTRL, &temp); |
| pr_debug("upon restart CHG_CNTRL = 0x%x\n", temp); |
| |
| if (!(temp & VREF_BATT_THERM_FORCE_ON)) |
| /* |
| * batt therm force on bit is battery backed and is default 0 |
| * The charger sets this bit at init time. If this bit is found |
| * 0 that means the battery was removed. Tell the bms about it |
| */ |
| pm8921_bms_invalidate_shutdown_soc(); |
| } |
| |
| #define ENUM_TIMER_STOP_BIT BIT(1) |
| #define BOOT_DONE_BIT BIT(6) |
| #define BOOT_TIMER_EN_BIT BIT(1) |
| #define BOOT_DONE_MASK (BOOT_DONE_BIT | BOOT_TIMER_EN_BIT) |
| #define CHG_BATFET_ON_BIT BIT(3) |
| #define CHG_VCP_EN BIT(0) |
| #define CHG_BAT_TEMP_DIS_BIT BIT(2) |
| #define SAFE_CURRENT_MA 1500 |
| static int __devinit pm8921_chg_hw_init(struct pm8921_chg_chip *chip) |
| { |
| int rc; |
| int vdd_safe; |
| |
| /* forcing 19p2mhz before accessing any charger registers */ |
| pm8921_chg_force_19p2mhz_clk(chip); |
| |
| detect_battery_removal(chip); |
| |
| rc = pm_chg_masked_write(chip, SYS_CONFIG_2, |
| BOOT_DONE_MASK, BOOT_DONE_MASK); |
| if (rc) { |
| pr_err("Failed to set BOOT_DONE_BIT rc=%d\n", rc); |
| return rc; |
| } |
| |
| vdd_safe = chip->max_voltage_mv + VDD_MAX_INCREASE_MV; |
| |
| if (vdd_safe > PM8921_CHG_VDDSAFE_MAX) |
| vdd_safe = PM8921_CHG_VDDSAFE_MAX; |
| |
| rc = pm_chg_vddsafe_set(chip, vdd_safe); |
| |
| if (rc) { |
| pr_err("Failed to set safe voltage to %d rc=%d\n", |
| chip->max_voltage_mv, rc); |
| return rc; |
| } |
| rc = pm_chg_vbatdet_set(chip, |
| chip->max_voltage_mv |
| - chip->resume_voltage_delta); |
| if (rc) { |
| pr_err("Failed to set vbatdet comprator voltage to %d rc=%d\n", |
| chip->max_voltage_mv - chip->resume_voltage_delta, rc); |
| return rc; |
| } |
| |
| rc = pm_chg_vddmax_set(chip, chip->max_voltage_mv); |
| if (rc) { |
| pr_err("Failed to set max voltage to %d rc=%d\n", |
| chip->max_voltage_mv, rc); |
| return rc; |
| } |
| rc = pm_chg_ibatsafe_set(chip, SAFE_CURRENT_MA); |
| if (rc) { |
| pr_err("Failed to set max voltage to %d rc=%d\n", |
| SAFE_CURRENT_MA, rc); |
| return rc; |
| } |
| |
| rc = pm_chg_ibatmax_set(chip, chip->max_bat_chg_current); |
| if (rc) { |
| pr_err("Failed to set max current to 400 rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = pm_chg_iterm_set(chip, chip->term_current); |
| if (rc) { |
| pr_err("Failed to set term current to %d rc=%d\n", |
| chip->term_current, rc); |
| return rc; |
| } |
| |
| /* Disable the ENUM TIMER */ |
| rc = pm_chg_masked_write(chip, PBL_ACCESS2, ENUM_TIMER_STOP_BIT, |
| ENUM_TIMER_STOP_BIT); |
| if (rc) { |
| pr_err("Failed to set enum timer stop rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (chip->safety_time != 0) { |
| rc = pm_chg_tchg_max_set(chip, chip->safety_time); |
| if (rc) { |
| pr_err("Failed to set max time to %d minutes rc=%d\n", |
| chip->safety_time, rc); |
| return rc; |
| } |
| } |
| |
| if (chip->ttrkl_time != 0) { |
| rc = pm_chg_ttrkl_max_set(chip, chip->ttrkl_time); |
| if (rc) { |
| pr_err("Failed to set trkl time to %d minutes rc=%d\n", |
| chip->safety_time, rc); |
| return rc; |
| } |
| } |
| |
| if (chip->vin_min != 0) { |
| rc = pm_chg_vinmin_set(chip, chip->vin_min); |
| if (rc) { |
| pr_err("Failed to set vin min to %d mV rc=%d\n", |
| chip->vin_min, rc); |
| return rc; |
| } |
| } else { |
| chip->vin_min = pm_chg_vinmin_get(chip); |
| } |
| |
| rc = pm_chg_disable_wd(chip); |
| if (rc) { |
| pr_err("Failed to disable wd rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = pm_chg_masked_write(chip, CHG_CNTRL_2, |
| CHG_BAT_TEMP_DIS_BIT, 0); |
| if (rc) { |
| pr_err("Failed to enable temp control chg rc=%d\n", rc); |
| return rc; |
| } |
| /* switch to a 3.2Mhz for the buck */ |
| if (pm8xxx_get_revision(chip->dev->parent) >= PM8XXX_REVISION_8038_1p0) |
| rc = pm8xxx_writeb(chip->dev->parent, |
| CHG_BUCK_CLOCK_CTRL_8038, 0x15); |
| else |
| rc = pm8xxx_writeb(chip->dev->parent, |
| CHG_BUCK_CLOCK_CTRL, 0x15); |
| |
| if (rc) { |
| pr_err("Failed to switch buck clk rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (chip->trkl_voltage != 0) { |
| rc = pm_chg_vtrkl_low_set(chip, chip->trkl_voltage); |
| if (rc) { |
| pr_err("Failed to set trkl voltage to %dmv rc=%d\n", |
| chip->trkl_voltage, rc); |
| return rc; |
| } |
| } |
| |
| if (chip->weak_voltage != 0) { |
| rc = pm_chg_vweak_set(chip, chip->weak_voltage); |
| if (rc) { |
| pr_err("Failed to set weak voltage to %dmv rc=%d\n", |
| chip->weak_voltage, rc); |
| return rc; |
| } |
| } |
| |
| if (chip->trkl_current != 0) { |
| rc = pm_chg_itrkl_set(chip, chip->trkl_current); |
| if (rc) { |
| pr_err("Failed to set trkl current to %dmA rc=%d\n", |
| chip->trkl_voltage, rc); |
| return rc; |
| } |
| } |
| |
| if (chip->weak_current != 0) { |
| rc = pm_chg_iweak_set(chip, chip->weak_current); |
| if (rc) { |
| pr_err("Failed to set weak current to %dmA rc=%d\n", |
| chip->weak_current, rc); |
| return rc; |
| } |
| } |
| |
| rc = pm_chg_batt_cold_temp_config(chip, chip->cold_thr); |
| if (rc) { |
| pr_err("Failed to set cold config %d rc=%d\n", |
| chip->cold_thr, rc); |
| } |
| |
| rc = pm_chg_batt_hot_temp_config(chip, chip->hot_thr); |
| if (rc) { |
| pr_err("Failed to set hot config %d rc=%d\n", |
| chip->hot_thr, rc); |
| } |
| |
| rc = pm_chg_led_src_config(chip, chip->led_src_config); |
| if (rc) { |
| pr_err("Failed to set charger LED src config %d rc=%d\n", |
| chip->led_src_config, rc); |
| } |
| |
| /* Workarounds for die 3.0 */ |
| if (pm8xxx_get_revision(chip->dev->parent) == PM8XXX_REVISION_8921_3p0 |
| && pm8xxx_get_version(chip->dev->parent) == PM8XXX_VERSION_8921) |
| pm8xxx_writeb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, 0xAC); |
| |
| /* Enable isub_fine resolution AICL for PM8917 */ |
| if (pm8xxx_get_version(chip->dev->parent) == PM8XXX_VERSION_8917) { |
| chip->iusb_fine_res = true; |
| if (chip->uvd_voltage_mv) |
| rc = pm_chg_uvd_threshold_set(chip, |
| chip->uvd_voltage_mv); |
| if (rc) { |
| pr_err("Failed to set UVD threshold %drc=%d\n", |
| chip->uvd_voltage_mv, rc); |
| return rc; |
| } |
| } |
| |
| pm8xxx_writeb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, 0xD9); |
| |
| /* Disable EOC FSM processing */ |
| pm8xxx_writeb(chip->dev->parent, CHG_BUCK_CTRL_TEST3, 0x91); |
| |
| rc = pm_chg_masked_write(chip, CHG_CNTRL, VREF_BATT_THERM_FORCE_ON, |
| VREF_BATT_THERM_FORCE_ON); |
| if (rc) |
| pr_err("Failed to Force Vref therm rc=%d\n", rc); |
| |
| rc = pm_chg_charge_dis(chip, charging_disabled); |
| if (rc) { |
| pr_err("Failed to disable CHG_CHARGE_DIS bit rc=%d\n", rc); |
| return rc; |
| } |
| |
| rc = pm_chg_auto_enable(chip, !charging_disabled); |
| if (rc) { |
| pr_err("Failed to enable charging rc=%d\n", rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| static int get_rt_status(void *data, u64 * val) |
| { |
| int i = (int)data; |
| int ret; |
| |
| /* global irq number is passed in via data */ |
| ret = pm_chg_get_rt_status(the_chip, i); |
| *val = ret; |
| return 0; |
| } |
| DEFINE_SIMPLE_ATTRIBUTE(rt_fops, get_rt_status, NULL, "%llu\n"); |
| |
| static int get_fsm_status(void *data, u64 * val) |
| { |
| u8 temp; |
| |
| temp = pm_chg_get_fsm_state(the_chip); |
| *val = temp; |
| return 0; |
| } |
| DEFINE_SIMPLE_ATTRIBUTE(fsm_fops, get_fsm_status, NULL, "%llu\n"); |
| |
| static int get_reg_loop(void *data, u64 * val) |
| { |
| u8 temp; |
| |
| if (!the_chip) { |
| pr_err("%s called before init\n", __func__); |
| return -EINVAL; |
| } |
| temp = pm_chg_get_regulation_loop(the_chip); |
| *val = temp; |
| return 0; |
| } |
| DEFINE_SIMPLE_ATTRIBUTE(reg_loop_fops, get_reg_loop, NULL, "0x%02llx\n"); |
| |
| static int get_reg(void *data, u64 * val) |
| { |
| int addr = (int)data; |
| int ret; |
| u8 temp; |
| |
| ret = pm8xxx_readb(the_chip->dev->parent, addr, &temp); |
| if (ret) { |
| pr_err("pm8xxx_readb to %x value =%d errored = %d\n", |
| addr, temp, ret); |
| return -EAGAIN; |
| } |
| *val = temp; |
| return 0; |
| } |
| |
| static int set_reg(void *data, u64 val) |
| { |
| int addr = (int)data; |
| int ret; |
| u8 temp; |
| |
| temp = (u8) val; |
| ret = pm8xxx_writeb(the_chip->dev->parent, addr, temp); |
| if (ret) { |
| pr_err("pm8xxx_writeb to %x value =%d errored = %d\n", |
| addr, temp, ret); |
| return -EAGAIN; |
| } |
| return 0; |
| } |
| DEFINE_SIMPLE_ATTRIBUTE(reg_fops, get_reg, set_reg, "0x%02llx\n"); |
| |
| enum { |
| BAT_WARM_ZONE, |
| BAT_COOL_ZONE, |
| }; |
| static int get_warm_cool(void *data, u64 * val) |
| { |
| if (!the_chip) { |
| pr_err("%s called before init\n", __func__); |
| return -EINVAL; |
| } |
| if ((int)data == BAT_WARM_ZONE) |
| *val = the_chip->is_bat_warm; |
| if ((int)data == BAT_COOL_ZONE) |
| *val = the_chip->is_bat_cool; |
| return 0; |
| } |
| DEFINE_SIMPLE_ATTRIBUTE(warm_cool_fops, get_warm_cool, NULL, "0x%lld\n"); |
| |
| static void create_debugfs_entries(struct pm8921_chg_chip *chip) |
| { |
| int i; |
| |
| chip->dent = debugfs_create_dir("pm8921_chg", NULL); |
| |
| if (IS_ERR(chip->dent)) { |
| pr_err("pmic charger couldnt create debugfs dir\n"); |
| return; |
| } |
| |
| debugfs_create_file("CHG_CNTRL", 0644, chip->dent, |
| (void *)CHG_CNTRL, ®_fops); |
| debugfs_create_file("CHG_CNTRL_2", 0644, chip->dent, |
| (void *)CHG_CNTRL_2, ®_fops); |
| debugfs_create_file("CHG_CNTRL_3", 0644, chip->dent, |
| (void *)CHG_CNTRL_3, ®_fops); |
| debugfs_create_file("PBL_ACCESS1", 0644, chip->dent, |
| (void *)PBL_ACCESS1, ®_fops); |
| debugfs_create_file("PBL_ACCESS2", 0644, chip->dent, |
| (void *)PBL_ACCESS2, ®_fops); |
| debugfs_create_file("SYS_CONFIG_1", 0644, chip->dent, |
| (void *)SYS_CONFIG_1, ®_fops); |
| debugfs_create_file("SYS_CONFIG_2", 0644, chip->dent, |
| (void *)SYS_CONFIG_2, ®_fops); |
| debugfs_create_file("CHG_VDD_MAX", 0644, chip->dent, |
| (void *)CHG_VDD_MAX, ®_fops); |
| debugfs_create_file("CHG_VDD_SAFE", 0644, chip->dent, |
| (void *)CHG_VDD_SAFE, ®_fops); |
| debugfs_create_file("CHG_VBAT_DET", 0644, chip->dent, |
| (void *)CHG_VBAT_DET, ®_fops); |
| debugfs_create_file("CHG_IBAT_MAX", 0644, chip->dent, |
| (void *)CHG_IBAT_MAX, ®_fops); |
| debugfs_create_file("CHG_IBAT_SAFE", 0644, chip->dent, |
| (void *)CHG_IBAT_SAFE, ®_fops); |
| debugfs_create_file("CHG_VIN_MIN", 0644, chip->dent, |
| (void *)CHG_VIN_MIN, ®_fops); |
| debugfs_create_file("CHG_VTRICKLE", 0644, chip->dent, |
| (void *)CHG_VTRICKLE, ®_fops); |
| debugfs_create_file("CHG_ITRICKLE", 0644, chip->dent, |
| (void *)CHG_ITRICKLE, ®_fops); |
| debugfs_create_file("CHG_ITERM", 0644, chip->dent, |
| (void *)CHG_ITERM, ®_fops); |
| debugfs_create_file("CHG_TCHG_MAX", 0644, chip->dent, |
| (void *)CHG_TCHG_MAX, ®_fops); |
| debugfs_create_file("CHG_TWDOG", 0644, chip->dent, |
| (void *)CHG_TWDOG, ®_fops); |
| debugfs_create_file("CHG_TEMP_THRESH", 0644, chip->dent, |
| (void *)CHG_TEMP_THRESH, ®_fops); |
| debugfs_create_file("CHG_COMP_OVR", 0644, chip->dent, |
| (void *)CHG_COMP_OVR, ®_fops); |
| debugfs_create_file("CHG_BUCK_CTRL_TEST1", 0644, chip->dent, |
| (void *)CHG_BUCK_CTRL_TEST1, ®_fops); |
| debugfs_create_file("CHG_BUCK_CTRL_TEST2", 0644, chip->dent, |
| (void *)CHG_BUCK_CTRL_TEST2, ®_fops); |
| debugfs_create_file("CHG_BUCK_CTRL_TEST3", 0644, chip->dent, |
| (void *)CHG_BUCK_CTRL_TEST3, ®_fops); |
| debugfs_create_file("CHG_TEST", 0644, chip->dent, |
| (void *)CHG_TEST, ®_fops); |
| |
| debugfs_create_file("FSM_STATE", 0644, chip->dent, NULL, |
| &fsm_fops); |
| |
| debugfs_create_file("REGULATION_LOOP_CONTROL", 0644, chip->dent, NULL, |
| ®_loop_fops); |
| |
| debugfs_create_file("BAT_WARM_ZONE", 0644, chip->dent, |
| (void *)BAT_WARM_ZONE, &warm_cool_fops); |
| debugfs_create_file("BAT_COOL_ZONE", 0644, chip->dent, |
| (void *)BAT_COOL_ZONE, &warm_cool_fops); |
| |
| for (i = 0; i < ARRAY_SIZE(chg_irq_data); i++) { |
| if (chip->pmic_chg_irq[chg_irq_data[i].irq_id]) |
| debugfs_create_file(chg_irq_data[i].name, 0444, |
| chip->dent, |
| (void *)chg_irq_data[i].irq_id, |
| &rt_fops); |
| } |
| } |
| |
| static int pm8921_charger_suspend_noirq(struct device *dev) |
| { |
| int rc; |
| struct pm8921_chg_chip *chip = dev_get_drvdata(dev); |
| |
| rc = pm_chg_masked_write(chip, CHG_CNTRL, VREF_BATT_THERM_FORCE_ON, 0); |
| if (rc) |
| pr_err("Failed to Force Vref therm off rc=%d\n", rc); |
| pm8921_chg_set_hw_clk_switching(chip); |
| return 0; |
| } |
| |
| static int pm8921_charger_resume_noirq(struct device *dev) |
| { |
| int rc; |
| struct pm8921_chg_chip *chip = dev_get_drvdata(dev); |
| |
| pm8921_chg_force_19p2mhz_clk(chip); |
| |
| rc = pm_chg_masked_write(chip, CHG_CNTRL, VREF_BATT_THERM_FORCE_ON, |
| VREF_BATT_THERM_FORCE_ON); |
| if (rc) |
| pr_err("Failed to Force Vref therm on rc=%d\n", rc); |
| return 0; |
| } |
| |
| static int pm8921_charger_resume(struct device *dev) |
| { |
| int rc; |
| struct pm8921_chg_chip *chip = dev_get_drvdata(dev); |
| |
| if (!(chip->cool_temp_dc == INT_MIN && chip->warm_temp_dc == INT_MIN) |
| && !(chip->keep_btm_on_suspend)) { |
| rc = pm8xxx_adc_btm_configure(&btm_config); |
| if (rc) |
| pr_err("couldn't reconfigure btm rc=%d\n", rc); |
| |
| rc = pm8xxx_adc_btm_start(); |
| if (rc) |
| pr_err("couldn't restart btm rc=%d\n", rc); |
| } |
| if (pm8921_chg_is_enabled(chip, LOOP_CHANGE_IRQ)) { |
| disable_irq_wake(chip->pmic_chg_irq[LOOP_CHANGE_IRQ]); |
| pm8921_chg_disable_irq(chip, LOOP_CHANGE_IRQ); |
| } |
| return 0; |
| } |
| |
| static int pm8921_charger_suspend(struct device *dev) |
| { |
| int rc; |
| struct pm8921_chg_chip *chip = dev_get_drvdata(dev); |
| |
| if (!(chip->cool_temp_dc == INT_MIN && chip->warm_temp_dc == INT_MIN) |
| && !(chip->keep_btm_on_suspend)) { |
| rc = pm8xxx_adc_btm_end(); |
| if (rc) |
| pr_err("Failed to disable BTM on suspend rc=%d\n", rc); |
| } |
| |
| if (is_usb_chg_plugged_in(chip)) { |
| pm8921_chg_enable_irq(chip, LOOP_CHANGE_IRQ); |
| enable_irq_wake(chip->pmic_chg_irq[LOOP_CHANGE_IRQ]); |
| } |
| |
| return 0; |
| } |
| static int __devinit pm8921_charger_probe(struct platform_device *pdev) |
| { |
| int rc = 0; |
| struct pm8921_chg_chip *chip; |
| const struct pm8921_charger_platform_data *pdata |
| = pdev->dev.platform_data; |
| |
| if (!pdata) { |
| pr_err("missing platform data\n"); |
| return -EINVAL; |
| } |
| |
| chip = kzalloc(sizeof(struct pm8921_chg_chip), |
| GFP_KERNEL); |
| if (!chip) { |
| pr_err("Cannot allocate pm_chg_chip\n"); |
| return -ENOMEM; |
| } |
| |
| chip->dev = &pdev->dev; |
| chip->safety_time = pdata->safety_time; |
| chip->ttrkl_time = pdata->ttrkl_time; |
| chip->update_time = pdata->update_time; |
| chip->max_voltage_mv = pdata->max_voltage; |
| chip->min_voltage_mv = pdata->min_voltage; |
| chip->uvd_voltage_mv = pdata->uvd_thresh_voltage; |
| chip->resume_voltage_delta = pdata->resume_voltage_delta; |
| chip->term_current = pdata->term_current; |
| chip->vbat_channel = pdata->charger_cdata.vbat_channel; |
| chip->batt_temp_channel = pdata->charger_cdata.batt_temp_channel; |
| chip->batt_id_channel = pdata->charger_cdata.batt_id_channel; |
| chip->batt_id_min = pdata->batt_id_min; |
| chip->batt_id_max = pdata->batt_id_max; |
| if (pdata->cool_temp != INT_MIN) |
| chip->cool_temp_dc = pdata->cool_temp * 10; |
| else |
| chip->cool_temp_dc = INT_MIN; |
| |
| if (pdata->warm_temp != INT_MIN) |
| chip->warm_temp_dc = pdata->warm_temp * 10; |
| else |
| chip->warm_temp_dc = INT_MIN; |
| |
| chip->temp_check_period = pdata->temp_check_period; |
| chip->dc_unplug_check = pdata->dc_unplug_check; |
| chip->max_bat_chg_current = pdata->max_bat_chg_current; |
| chip->cool_bat_chg_current = pdata->cool_bat_chg_current; |
| chip->warm_bat_chg_current = pdata->warm_bat_chg_current; |
| chip->cool_bat_voltage = pdata->cool_bat_voltage; |
| chip->warm_bat_voltage = pdata->warm_bat_voltage; |
| chip->keep_btm_on_suspend = pdata->keep_btm_on_suspend; |
| chip->trkl_voltage = pdata->trkl_voltage; |
| chip->weak_voltage = pdata->weak_voltage; |
| chip->trkl_current = pdata->trkl_current; |
| chip->weak_current = pdata->weak_current; |
| chip->vin_min = pdata->vin_min; |
| chip->thermal_mitigation = pdata->thermal_mitigation; |
| chip->thermal_levels = pdata->thermal_levels; |
| |
| chip->cold_thr = pdata->cold_thr; |
| chip->hot_thr = pdata->hot_thr; |
| chip->rconn_mohm = pdata->rconn_mohm; |
| chip->led_src_config = pdata->led_src_config; |
| chip->has_dc_supply = pdata->has_dc_supply; |
| |
| rc = pm8921_chg_hw_init(chip); |
| if (rc) { |
| pr_err("couldn't init hardware rc=%d\n", rc); |
| goto free_chip; |
| } |
| |
| chip->usb_psy.name = "usb", |
| chip->usb_psy.type = POWER_SUPPLY_TYPE_USB, |
| chip->usb_psy.supplied_to = pm_power_supplied_to, |
| chip->usb_psy.num_supplicants = ARRAY_SIZE(pm_power_supplied_to), |
| chip->usb_psy.properties = pm_power_props_usb, |
| chip->usb_psy.num_properties = ARRAY_SIZE(pm_power_props_usb), |
| chip->usb_psy.get_property = pm_power_get_property_usb, |
| chip->usb_psy.set_property = pm_power_set_property_usb, |
| |
| chip->dc_psy.name = "pm8921-dc", |
| chip->dc_psy.type = POWER_SUPPLY_TYPE_MAINS, |
| chip->dc_psy.supplied_to = pm_power_supplied_to, |
| chip->dc_psy.num_supplicants = ARRAY_SIZE(pm_power_supplied_to), |
| chip->dc_psy.properties = pm_power_props_mains, |
| chip->dc_psy.num_properties = ARRAY_SIZE(pm_power_props_mains), |
| chip->dc_psy.get_property = pm_power_get_property_mains, |
| |
| chip->batt_psy.name = "battery", |
| chip->batt_psy.type = POWER_SUPPLY_TYPE_BATTERY, |
| chip->batt_psy.properties = msm_batt_power_props, |
| chip->batt_psy.num_properties = ARRAY_SIZE(msm_batt_power_props), |
| chip->batt_psy.get_property = pm_batt_power_get_property, |
| chip->batt_psy.external_power_changed = pm_batt_external_power_changed, |
| rc = power_supply_register(chip->dev, &chip->usb_psy); |
| if (rc < 0) { |
| pr_err("power_supply_register usb failed rc = %d\n", rc); |
| goto free_chip; |
| } |
| |
| rc = power_supply_register(chip->dev, &chip->dc_psy); |
| if (rc < 0) { |
| pr_err("power_supply_register usb failed rc = %d\n", rc); |
| goto unregister_usb; |
| } |
| |
| rc = power_supply_register(chip->dev, &chip->batt_psy); |
| if (rc < 0) { |
| pr_err("power_supply_register batt failed rc = %d\n", rc); |
| goto unregister_dc; |
| } |
| |
| platform_set_drvdata(pdev, chip); |
| the_chip = chip; |
| |
| wake_lock_init(&chip->eoc_wake_lock, WAKE_LOCK_SUSPEND, "pm8921_eoc"); |
| INIT_DELAYED_WORK(&chip->eoc_work, eoc_worker); |
| INIT_DELAYED_WORK(&chip->vin_collapse_check_work, |
| vin_collapse_check_worker); |
| INIT_DELAYED_WORK(&chip->unplug_check_work, unplug_check_worker); |
| |
| rc = request_irqs(chip, pdev); |
| if (rc) { |
| pr_err("couldn't register interrupts rc=%d\n", rc); |
| goto unregister_batt; |
| } |
| |
| enable_irq_wake(chip->pmic_chg_irq[USBIN_VALID_IRQ]); |
| enable_irq_wake(chip->pmic_chg_irq[USBIN_OV_IRQ]); |
| enable_irq_wake(chip->pmic_chg_irq[USBIN_UV_IRQ]); |
| enable_irq_wake(chip->pmic_chg_irq[BAT_TEMP_OK_IRQ]); |
| enable_irq_wake(chip->pmic_chg_irq[VBATDET_LOW_IRQ]); |
| enable_irq_wake(chip->pmic_chg_irq[FASTCHG_IRQ]); |
| /* |
| * if both the cool_temp_dc and warm_temp_dc are invalid device doesnt |
| * care for jeita compliance |
| */ |
| if (!(chip->cool_temp_dc == INT_MIN && chip->warm_temp_dc == INT_MIN)) { |
| rc = configure_btm(chip); |
| if (rc) { |
| pr_err("couldn't register with btm rc=%d\n", rc); |
| goto free_irq; |
| } |
| } |
| |
| create_debugfs_entries(chip); |
| |
| INIT_WORK(&chip->bms_notify.work, bms_notify); |
| INIT_WORK(&chip->battery_id_valid_work, battery_id_valid); |
| |
| /* determine what state the charger is in */ |
| determine_initial_state(chip); |
| |
| if (chip->update_time) { |
| INIT_DELAYED_WORK(&chip->update_heartbeat_work, |
| update_heartbeat); |
| schedule_delayed_work(&chip->update_heartbeat_work, |
| round_jiffies_relative(msecs_to_jiffies |
| (chip->update_time))); |
| } |
| return 0; |
| |
| free_irq: |
| free_irqs(chip); |
| unregister_batt: |
| power_supply_unregister(&chip->batt_psy); |
| unregister_dc: |
| power_supply_unregister(&chip->dc_psy); |
| unregister_usb: |
| power_supply_unregister(&chip->usb_psy); |
| free_chip: |
| kfree(chip); |
| return rc; |
| } |
| |
| static int __devexit pm8921_charger_remove(struct platform_device *pdev) |
| { |
| struct pm8921_chg_chip *chip = platform_get_drvdata(pdev); |
| |
| free_irqs(chip); |
| platform_set_drvdata(pdev, NULL); |
| the_chip = NULL; |
| kfree(chip); |
| return 0; |
| } |
| static const struct dev_pm_ops pm8921_pm_ops = { |
| .suspend = pm8921_charger_suspend, |
| .suspend_noirq = pm8921_charger_suspend_noirq, |
| .resume_noirq = pm8921_charger_resume_noirq, |
| .resume = pm8921_charger_resume, |
| }; |
| static struct platform_driver pm8921_charger_driver = { |
| .probe = pm8921_charger_probe, |
| .remove = __devexit_p(pm8921_charger_remove), |
| .driver = { |
| .name = PM8921_CHARGER_DEV_NAME, |
| .owner = THIS_MODULE, |
| .pm = &pm8921_pm_ops, |
| }, |
| }; |
| |
| static int __init pm8921_charger_init(void) |
| { |
| return platform_driver_register(&pm8921_charger_driver); |
| } |
| |
| static void __exit pm8921_charger_exit(void) |
| { |
| platform_driver_unregister(&pm8921_charger_driver); |
| } |
| |
| late_initcall(pm8921_charger_init); |
| module_exit(pm8921_charger_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("PMIC8921 charger/battery driver"); |
| MODULE_VERSION("1.0"); |
| MODULE_ALIAS("platform:" PM8921_CHARGER_DEV_NAME); |