| /***************************************************************************** |
| * sdla_fr.c WANPIPE(tm) Multiprotocol WAN Link Driver. Frame relay module. |
| * |
| * Author(s): Nenad Corbic <ncorbic@sangoma.com> |
| * Gideon Hack |
| * |
| * Copyright: (c) 1995-2001 Sangoma Technologies Inc. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * ============================================================================ |
| * Nov 23, 2000 Nenad Corbic o Added support for 2.4.X kernels |
| * Nov 15, 2000 David Rokavarg |
| * Nenad Corbic o Added frame relay bridging support. |
| * Original code from Mark Wells and Kristian Hoffmann has |
| * been integrated into the frame relay driver. |
| * Nov 13, 2000 Nenad Corbic o Added true interface type encoding option. |
| * Tcpdump doesn't support Frame Relay inteface |
| * types, to fix this true type option will set |
| * the interface type to RAW IP mode. |
| * Nov 07, 2000 Nenad Corbic o Added security features for UDP debugging: |
| * Deny all and specify allowed requests. |
| * Nov 06, 2000 Nenad Corbic o Wanpipe interfaces conform to raw packet interfaces. |
| * Moved the if_header into the if_send() routine. |
| * The if_header() was breaking the libpcap |
| * support. i.e. support for tcpdump, ethereal ... |
| * Oct 12. 2000 Nenad Corbic o Added error message in fr_configure |
| * Jul 31, 2000 Nenad Corbic o Fixed the Router UP Time. |
| * Apr 28, 2000 Nenad Corbic o Added the option to shutdown an interface |
| * when the channel gets disconnected. |
| * Apr 28, 2000 Nenad Corbic o Added M.Grants patch: disallow duplicate |
| * interface setups. |
| * Apr 25, 2000 Nenad Corbic o Added M.Grants patch: dynamically add/remove |
| * new dlcis/interfaces. |
| * Mar 23, 2000 Nenad Corbic o Improved task queue, bh handling. |
| * Mar 16, 2000 Nenad Corbic o Added Inverse ARP support |
| * Mar 13, 2000 Nenad Corbic o Added new socket API support. |
| * Mar 06, 2000 Nenad Corbic o Bug Fix: corrupted mbox recovery. |
| * Feb 24, 2000 Nenad Corbic o Fixed up FT1 UDP debugging problem. |
| * Dev 15, 1999 Nenad Corbic o Fixed up header files for 2.0.X kernels |
| * |
| * Nov 08, 1999 Nenad Corbic o Combined all debug UDP calls into one function |
| * o Removed the ARP support. This has to be done |
| * in the next version. |
| * o Only a Node can implement NO signalling. |
| * Initialize DLCI during if_open() if NO |
| * signalling. |
| * o Took out IPX support, implement in next |
| * version |
| * Sep 29, 1999 Nenad Corbic o Added SMP support and changed the update |
| * function to use timer interrupt. |
| * o Fixed the CIR bug: Set the value of BC |
| * to CIR when the CIR is enabled. |
| * o Updated comments, statistics and tracing. |
| * Jun 02, 1999 Gideon Hack o Updated for S514 support. |
| * Sep 18, 1998 Jaspreet Singh o Updated for 2.2.X kernels. |
| * Jul 31, 1998 Jaspreet Singh o Removed wpf_poll routine. The channel/DLCI |
| * status is received through an event interrupt. |
| * Jul 08, 1998 David Fong o Added inverse ARP support. |
| * Mar 26, 1997 Jaspreet Singh o Returning return codes for failed UDP cmds. |
| * Jan 28, 1997 Jaspreet Singh o Improved handling of inactive DLCIs. |
| * Dec 30, 1997 Jaspreet Singh o Replaced dev_tint() with mark_bh(NET_BH) |
| * Dec 16, 1997 Jaspreet Singh o Implemented Multiple IPX support. |
| * Nov 26, 1997 Jaspreet Singh o Improved load sharing with multiple boards |
| * o Added Cli() to protect enabling of interrupts |
| * while polling is called. |
| * Nov 24, 1997 Jaspreet Singh o Added counters to avoid enabling of interrupts |
| * when they have been disabled by another |
| * interface or routine (eg. wpf_poll). |
| * Nov 06, 1997 Jaspreet Singh o Added INTR_TEST_MODE to avoid polling |
| * routine disable interrupts during interrupt |
| * testing. |
| * Oct 20, 1997 Jaspreet Singh o Added hooks in for Router UP time. |
| * Oct 16, 1997 Jaspreet Singh o The critical flag is used to maintain flow |
| * control by avoiding RACE conditions. The |
| * cli() and restore_flags() are taken out. |
| * The fr_channel structure is appended for |
| * Driver Statistics. |
| * Oct 15, 1997 Farhan Thawar o updated if_send() and receive for IPX |
| * Aug 29, 1997 Farhan Thawar o Removed most of the cli() and sti() |
| * o Abstracted the UDP management stuff |
| * o Now use tbusy and critical more intelligently |
| * Jul 21, 1997 Jaspreet Singh o Can configure T391, T392, N391, N392 & N393 |
| * through router.conf. |
| * o Protected calls to sdla_peek() by adDing |
| * save_flags(), cli() and restore_flags(). |
| * o Added error message for Inactive DLCIs in |
| * fr_event() and update_chan_state(). |
| * o Fixed freeing up of buffers using kfree() |
| * when packets are received. |
| * Jul 07, 1997 Jaspreet Singh o Added configurable TTL for UDP packets |
| * o Added ability to discard multicast and |
| * broadcast source addressed packets |
| * Jun 27, 1997 Jaspreet Singh o Added FT1 monitor capabilities |
| * New case (0x44) statement in if_send routine |
| * Added a global variable rCount to keep track |
| * of FT1 status enabled on the board. |
| * May 29, 1997 Jaspreet Singh o Fixed major Flow Control Problem |
| * With multiple boards a problem was seen where |
| * the second board always stopped transmitting |
| * packet after running for a while. The code |
| * got into a stage where the interrupts were |
| * disabled and dev->tbusy was set to 1. |
| * This caused the If_send() routine to get into |
| * the if clause for it(0,dev->tbusy) |
| * forever. |
| * The code got into this stage due to an |
| * interrupt occurring within the if clause for |
| * set_bit(0,dev->tbusy). Since an interrupt |
| * disables furhter transmit interrupt and |
| * makes dev->tbusy = 0, this effect was undone |
| * by making dev->tbusy = 1 in the if clause. |
| * The Fix checks to see if Transmit interrupts |
| * are disabled then do not make dev->tbusy = 1 |
| * Introduced a global variable: int_occur and |
| * added tx_int_enabled in the wan_device |
| * structure. |
| * May 21, 1997 Jaspreet Singh o Fixed UDP Management for multiple |
| * boards. |
| * |
| * Apr 25, 1997 Farhan Thawar o added UDP Management stuff |
| * o fixed bug in if_send() and tx_intr() to |
| * sleep and wakeup all devices |
| * Mar 11, 1997 Farhan Thawar Version 3.1.1 |
| * o fixed (+1) bug in fr508_rx_intr() |
| * o changed if_send() to return 0 if |
| * wandev.critical() is true |
| * o free socket buffer in if_send() if |
| * returning 0 |
| * o added tx_intr() routine |
| * Jan 30, 1997 Gene Kozin Version 3.1.0 |
| * o implemented exec() entry point |
| * o fixed a bug causing driver configured as |
| * a FR switch to be stuck in WAN_ |
| * mode |
| * Jan 02, 1997 Gene Kozin Initial version. |
| *****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> /* printk(), and other useful stuff */ |
| #include <linux/stddef.h> /* offsetof(), etc. */ |
| #include <linux/errno.h> /* return codes */ |
| #include <linux/string.h> /* inline memset(), etc. */ |
| #include <linux/slab.h> /* kmalloc(), kfree() */ |
| #include <linux/wanrouter.h> /* WAN router definitions */ |
| #include <linux/wanpipe.h> /* WANPIPE common user API definitions */ |
| #include <linux/workqueue.h> |
| #include <linux/if_arp.h> /* ARPHRD_* defines */ |
| #include <asm/byteorder.h> /* htons(), etc. */ |
| #include <asm/io.h> /* for inb(), outb(), etc. */ |
| #include <linux/time.h> /* for do_gettimeofday */ |
| #include <linux/in.h> /* sockaddr_in */ |
| #include <asm/errno.h> |
| |
| #include <linux/ip.h> |
| #include <linux/if.h> |
| |
| #include <linux/if_wanpipe_common.h> /* Wanpipe Socket */ |
| #include <linux/if_wanpipe.h> |
| |
| #include <linux/sdla_fr.h> /* frame relay firmware API definitions */ |
| |
| #include <asm/uaccess.h> |
| #include <linux/inetdevice.h> |
| #include <linux/netdevice.h> |
| |
| #include <net/route.h> /* Dynamic Route Creation */ |
| #include <linux/etherdevice.h> /* eth_type_trans() used for bridging */ |
| #include <linux/random.h> |
| |
| /****** Defines & Macros ****************************************************/ |
| |
| #define MAX_CMD_RETRY 10 /* max number of firmware retries */ |
| |
| #define FR_HEADER_LEN 8 /* max encapsulation header size */ |
| #define FR_CHANNEL_MTU 1500 /* unfragmented logical channel MTU */ |
| |
| /* Q.922 frame types */ |
| #define Q922_UI 0x03 /* Unnumbered Info frame */ |
| #define Q922_XID 0xAF |
| |
| /* DLCI configured or not */ |
| #define DLCI_NOT_CONFIGURED 0x00 |
| #define DLCI_CONFIG_PENDING 0x01 |
| #define DLCI_CONFIGURED 0x02 |
| |
| /* CIR enabled or not */ |
| #define CIR_ENABLED 0x00 |
| #define CIR_DISABLED 0x01 |
| |
| #define FRAME_RELAY_API 1 |
| #define MAX_BH_BUFF 10 |
| |
| /* For handle_IPXWAN() */ |
| #define CVHexToAscii(b) (((unsigned char)(b) > (unsigned char)9) ? ((unsigned char)'A' + ((unsigned char)(b) - (unsigned char)10)) : ((unsigned char)'0' + (unsigned char)(b))) |
| |
| /****** Data Structures *****************************************************/ |
| |
| /* This is an extention of the 'struct device' we create for each network |
| * interface to keep the rest of channel-specific data. |
| */ |
| typedef struct fr_channel |
| { |
| wanpipe_common_t common; |
| char name[WAN_IFNAME_SZ+1]; /* interface name, ASCIIZ */ |
| unsigned dlci_configured ; /* check whether configured or not */ |
| unsigned cir_status; /* check whether CIR enabled or not */ |
| unsigned dlci; /* logical channel number */ |
| unsigned cir; /* committed information rate */ |
| unsigned bc; /* committed burst size */ |
| unsigned be; /* excess burst size */ |
| unsigned mc; /* multicast support on or off */ |
| unsigned tx_int_status; /* Transmit Interrupt Status */ |
| unsigned short pkt_length; /* Packet Length */ |
| unsigned long router_start_time;/* Router start time in seconds */ |
| unsigned long tick_counter; /* counter for transmit time out */ |
| char dev_pending_devtint; /* interface pending dev_tint() */ |
| void *dlci_int_interface; /* pointer to the DLCI Interface */ |
| unsigned long IB_addr; /* physical address of Interface Byte */ |
| unsigned long state_tick; /* time of the last state change */ |
| unsigned char enable_IPX; /* Enable/Disable the use of IPX */ |
| unsigned long network_number; /* Internal Network Number for IPX*/ |
| sdla_t *card; /* -> owner */ |
| unsigned route_flag; /* Add/Rem dest addr in route tables */ |
| unsigned inarp; /* Inverse Arp Request status */ |
| long inarp_ready; /* Ready to send requests */ |
| int inarp_interval; /* Time between InArp Requests */ |
| unsigned long inarp_tick; /* InArp jiffies tick counter */ |
| long interface_down; /* Bring interface down on disconnect */ |
| struct net_device_stats ifstats; /* interface statistics */ |
| if_send_stat_t drvstats_if_send; |
| rx_intr_stat_t drvstats_rx_intr; |
| pipe_mgmt_stat_t drvstats_gen; |
| unsigned long router_up_time; |
| |
| unsigned short transmit_length; |
| struct sk_buff *delay_skb; |
| |
| bh_data_t *bh_head; /* Circular buffer for chdlc_bh */ |
| unsigned long tq_working; |
| volatile int bh_write; |
| volatile int bh_read; |
| atomic_t bh_buff_used; |
| |
| /* Polling task queue. Each interface |
| * has its own task queue, which is used |
| * to defer events from the interrupt */ |
| struct work_struct fr_poll_work; |
| struct timer_list fr_arp_timer; |
| |
| u32 ip_local; |
| u32 ip_remote; |
| long config_dlci; |
| long unconfig_dlci; |
| |
| /* Whether this interface should be setup as a gateway. |
| * Used by dynamic route setup code */ |
| u8 gateway; |
| |
| /* True interface type */ |
| u8 true_if_encoding; |
| u8 fr_header[FR_HEADER_LEN]; |
| char fr_header_len; |
| |
| } fr_channel_t; |
| |
| /* Route Flag options */ |
| #define NO_ROUTE 0x00 |
| #define ADD_ROUTE 0x01 |
| #define ROUTE_ADDED 0x02 |
| #define REMOVE_ROUTE 0x03 |
| #define ARP_REQ 0x04 |
| |
| /* inarp options */ |
| #define INARP_NONE 0x00 |
| #define INARP_REQUEST 0x01 |
| #define INARP_CONFIGURED 0x02 |
| |
| /* reasons for enabling the timer interrupt on the adapter */ |
| #define TMR_INT_ENABLED_UDP 0x01 |
| #define TMR_INT_ENABLED_UPDATE 0x02 |
| #define TMR_INT_ENABLED_ARP 0x04 |
| #define TMR_INT_ENABLED_UPDATE_STATE 0x08 |
| #define TMR_INT_ENABLED_CONFIG 0x10 |
| #define TMR_INT_ENABLED_UNCONFIG 0x20 |
| |
| |
| typedef struct dlci_status |
| { |
| unsigned short dlci PACKED; |
| unsigned char state PACKED; |
| } dlci_status_t; |
| |
| typedef struct dlci_IB_mapping |
| { |
| unsigned short dlci PACKED; |
| unsigned long addr_value PACKED; |
| } dlci_IB_mapping_t; |
| |
| /* This structure is used for DLCI list Tx interrupt mode. It is used to |
| enable interrupt bit and set the packet length for transmission |
| */ |
| typedef struct fr_dlci_interface |
| { |
| unsigned char gen_interrupt PACKED; |
| unsigned short packet_length PACKED; |
| unsigned char reserved PACKED; |
| } fr_dlci_interface_t; |
| |
| /* variable for keeping track of enabling/disabling FT1 monitor status */ |
| static int rCount = 0; |
| |
| extern void disable_irq(unsigned int); |
| extern void enable_irq(unsigned int); |
| |
| /* variable for keeping track of number of interrupts generated during |
| * interrupt test routine |
| */ |
| static int Intr_test_counter; |
| |
| /****** Function Prototypes *************************************************/ |
| |
| /* WAN link driver entry points. These are called by the WAN router module. */ |
| static int update(struct wan_device *wandev); |
| static int new_if(struct wan_device *wandev, struct net_device *dev, |
| wanif_conf_t *conf); |
| static int del_if(struct wan_device *wandev, struct net_device *dev); |
| static void disable_comm (sdla_t *card); |
| |
| /* WANPIPE-specific entry points */ |
| static int wpf_exec(struct sdla *card, void *u_cmd, void *u_data); |
| |
| /* Network device interface */ |
| static int if_init(struct net_device *dev); |
| static int if_open(struct net_device *dev); |
| static int if_close(struct net_device *dev); |
| |
| static void if_tx_timeout(struct net_device *dev); |
| |
| static int if_rebuild_hdr (struct sk_buff *skb); |
| |
| static int if_send(struct sk_buff *skb, struct net_device *dev); |
| static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev, |
| struct sk_buff *skb); |
| static struct net_device_stats *if_stats(struct net_device *dev); |
| |
| /* Interrupt handlers */ |
| static void fr_isr(sdla_t *card); |
| static void rx_intr(sdla_t *card); |
| static void tx_intr(sdla_t *card); |
| static void timer_intr(sdla_t *card); |
| static void spur_intr(sdla_t *card); |
| |
| /* Frame relay firmware interface functions */ |
| static int fr_read_version(sdla_t *card, char *str); |
| static int fr_configure(sdla_t *card, fr_conf_t *conf); |
| static int fr_dlci_configure(sdla_t *card, fr_dlc_conf_t *conf, unsigned dlci); |
| static int fr_init_dlci (sdla_t *card, fr_channel_t *chan); |
| static int fr_set_intr_mode (sdla_t *card, unsigned mode, unsigned mtu, unsigned short timeout); |
| static int fr_comm_enable(sdla_t *card); |
| static void fr_comm_disable(sdla_t *card); |
| static int fr_get_err_stats(sdla_t *card); |
| static int fr_get_stats(sdla_t *card); |
| static int fr_add_dlci(sdla_t *card, int dlci); |
| static int fr_activate_dlci(sdla_t *card, int dlci); |
| static int fr_delete_dlci (sdla_t* card, int dlci); |
| static int fr_issue_isf(sdla_t *card, int isf); |
| static int fr_send(sdla_t *card, int dlci, unsigned char attr, int len, |
| void *buf); |
| static int fr_send_data_header(sdla_t *card, int dlci, unsigned char attr, int len, |
| void *buf,unsigned char hdr_len); |
| static unsigned int fr_send_hdr(sdla_t *card, int dlci, unsigned int offset); |
| |
| static int check_dlci_config (sdla_t *card, fr_channel_t *chan); |
| static void initialize_rx_tx_buffers (sdla_t *card); |
| |
| |
| /* Firmware asynchronous event handlers */ |
| static int fr_event(sdla_t *card, int event, fr_mbox_t *mbox); |
| static int fr_modem_failure(sdla_t *card, fr_mbox_t *mbox); |
| static int fr_dlci_change(sdla_t *card, fr_mbox_t *mbox); |
| |
| /* Miscellaneous functions */ |
| static int update_chan_state(struct net_device *dev); |
| static void set_chan_state(struct net_device *dev, int state); |
| static struct net_device *find_channel(sdla_t *card, unsigned dlci); |
| static int is_tx_ready(sdla_t *card, fr_channel_t *chan); |
| static unsigned int dec_to_uint(unsigned char *str, int len); |
| static int reply_udp( unsigned char *data, unsigned int mbox_len ); |
| |
| static int intr_test( sdla_t* card ); |
| static void init_chan_statistics( fr_channel_t* chan ); |
| static void init_global_statistics( sdla_t* card ); |
| static void read_DLCI_IB_mapping( sdla_t* card, fr_channel_t* chan ); |
| static int setup_for_delayed_transmit(struct net_device* dev, |
| struct sk_buff *skb); |
| |
| struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev); |
| static int check_tx_status(sdla_t *card, struct net_device *dev); |
| |
| /* Frame Relay Socket API */ |
| static void trigger_fr_bh (fr_channel_t *); |
| static void fr_bh(struct net_device *dev); |
| static int fr_bh_cleanup(struct net_device *dev); |
| static int bh_enqueue(struct net_device *dev, struct sk_buff *skb); |
| |
| static void trigger_fr_poll(struct net_device *dev); |
| static void fr_poll(struct net_device *dev); |
| //static void add_gateway(struct net_device *dev); |
| |
| static void trigger_unconfig_fr(struct net_device *dev); |
| static void unconfig_fr (sdla_t *); |
| |
| static void trigger_config_fr (sdla_t *); |
| static void config_fr (sdla_t *); |
| |
| |
| /* Inverse ARP and Dynamic routing functions */ |
| int process_ARP(arphdr_1490_t *ArpPacket, sdla_t *card, struct net_device *dev); |
| int is_arp(void *buf); |
| int send_inarp_request(sdla_t *card, struct net_device *dev); |
| |
| static void trigger_fr_arp(struct net_device *dev); |
| static void fr_arp (unsigned long data); |
| |
| |
| /* Udp management functions */ |
| static int process_udp_mgmt_pkt(sdla_t *card); |
| static int udp_pkt_type( struct sk_buff *skb, sdla_t *card ); |
| static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card, |
| struct sk_buff *skb, int dlci); |
| |
| /* IPX functions */ |
| static void switch_net_numbers(unsigned char *sendpacket, |
| unsigned long network_number, unsigned char incoming); |
| |
| static int handle_IPXWAN(unsigned char *sendpacket, char *devname, |
| unsigned char enable_IPX, unsigned long network_number); |
| |
| /* Lock Functions: SMP supported */ |
| void s508_s514_unlock(sdla_t *card, unsigned long *smp_flags); |
| void s508_s514_lock(sdla_t *card, unsigned long *smp_flags); |
| |
| unsigned short calc_checksum (char *, int); |
| static int setup_fr_header(struct sk_buff** skb, |
| struct net_device* dev, char op_mode); |
| |
| |
| /****** Public Functions ****************************************************/ |
| |
| /*============================================================================ |
| * Frame relay protocol initialization routine. |
| * |
| * This routine is called by the main WANPIPE module during setup. At this |
| * point adapter is completely initialized and firmware is running. |
| * o read firmware version (to make sure it's alive) |
| * o configure adapter |
| * o initialize protocol-specific fields of the adapter data space. |
| * |
| * Return: 0 o.k. |
| * < 0 failure. |
| */ |
| int wpf_init(sdla_t *card, wandev_conf_t *conf) |
| { |
| |
| int err; |
| fr508_flags_t* flags; |
| |
| union |
| { |
| char str[80]; |
| fr_conf_t cfg; |
| } u; |
| |
| fr_buf_info_t* buf_info; |
| int i; |
| |
| |
| printk(KERN_INFO "\n"); |
| |
| /* Verify configuration ID */ |
| if (conf->config_id != WANCONFIG_FR) { |
| |
| printk(KERN_INFO "%s: invalid configuration ID %u!\n", |
| card->devname, conf->config_id); |
| return -EINVAL; |
| |
| } |
| |
| /* Initialize protocol-specific fields of adapter data space */ |
| switch (card->hw.fwid) { |
| |
| case SFID_FR508: |
| card->mbox = (void*)(card->hw.dpmbase + |
| FR508_MBOX_OFFS); |
| card->flags = (void*)(card->hw.dpmbase + |
| FR508_FLAG_OFFS); |
| if(card->hw.type == SDLA_S514) { |
| card->mbox += FR_MB_VECTOR; |
| card->flags += FR_MB_VECTOR; |
| } |
| card->isr = &fr_isr; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| flags = card->flags; |
| |
| /* Read firmware version. Note that when adapter initializes, it |
| * clears the mailbox, so it may appear that the first command was |
| * executed successfully when in fact it was merely erased. To work |
| * around this, we execute the first command twice. |
| */ |
| |
| if (fr_read_version(card, NULL) || fr_read_version(card, u.str)) |
| return -EIO; |
| |
| printk(KERN_INFO "%s: running frame relay firmware v%s\n", |
| card->devname, u.str); |
| |
| /* Adjust configuration */ |
| conf->mtu += FR_HEADER_LEN; |
| conf->mtu = (conf->mtu >= MIN_LGTH_FR_DATA_CFG) ? |
| min_t(unsigned int, conf->mtu, FR_MAX_NO_DATA_BYTES_IN_FRAME) : |
| FR_CHANNEL_MTU + FR_HEADER_LEN; |
| |
| conf->bps = min_t(unsigned int, conf->bps, 2048000); |
| |
| /* Initialze the configuration structure sent to the board to zero */ |
| memset(&u.cfg, 0, sizeof(u.cfg)); |
| |
| memset(card->u.f.dlci_to_dev_map, 0, sizeof(card->u.f.dlci_to_dev_map)); |
| |
| /* Configure adapter firmware */ |
| |
| u.cfg.mtu = conf->mtu; |
| u.cfg.kbps = conf->bps / 1000; |
| |
| u.cfg.cir_fwd = u.cfg.cir_bwd = 16; |
| u.cfg.bc_fwd = u.cfg.bc_bwd = 16; |
| |
| u.cfg.options = 0x0000; |
| printk(KERN_INFO "%s: Global CIR enabled by Default\n", card->devname); |
| |
| switch (conf->u.fr.signalling) { |
| |
| case WANOPT_FR_ANSI: |
| u.cfg.options = 0x0000; |
| break; |
| |
| case WANOPT_FR_Q933: |
| u.cfg.options |= 0x0200; |
| break; |
| |
| case WANOPT_FR_LMI: |
| u.cfg.options |= 0x0400; |
| break; |
| |
| case WANOPT_NO: |
| u.cfg.options |= 0x0800; |
| break; |
| default: |
| printk(KERN_INFO "%s: Illegal Signalling option\n", |
| card->wandev.name); |
| return -EINVAL; |
| } |
| |
| |
| card->wandev.signalling = conf->u.fr.signalling; |
| |
| if (conf->station == WANOPT_CPE) { |
| |
| |
| if (conf->u.fr.signalling == WANOPT_NO){ |
| printk(KERN_INFO |
| "%s: ERROR - For NO signalling, station must be set to Node!", |
| card->devname); |
| return -EINVAL; |
| } |
| |
| u.cfg.station = 0; |
| u.cfg.options |= 0x8000; /* auto config DLCI */ |
| card->u.f.dlci_num = 0; |
| |
| } else { |
| |
| u.cfg.station = 1; /* switch emulation mode */ |
| |
| /* For switch emulation we have to create a list of dlci(s) |
| * that will be sent to be global SET_DLCI_CONFIGURATION |
| * command in fr_configure() routine. |
| */ |
| |
| card->u.f.dlci_num = min_t(unsigned int, max_t(unsigned int, conf->u.fr.dlci_num, 1), 100); |
| |
| for ( i = 0; i < card->u.f.dlci_num; i++) { |
| |
| card->u.f.node_dlci[i] = (unsigned short) |
| conf->u.fr.dlci[i] ? conf->u.fr.dlci[i] : 16; |
| |
| } |
| } |
| |
| if (conf->clocking == WANOPT_INTERNAL) |
| u.cfg.port |= 0x0001; |
| |
| if (conf->interface == WANOPT_RS232) |
| u.cfg.port |= 0x0002; |
| |
| if (conf->u.fr.t391) |
| u.cfg.t391 = min_t(unsigned int, conf->u.fr.t391, 30); |
| else |
| u.cfg.t391 = 5; |
| |
| if (conf->u.fr.t392) |
| u.cfg.t392 = min_t(unsigned int, conf->u.fr.t392, 30); |
| else |
| u.cfg.t392 = 15; |
| |
| if (conf->u.fr.n391) |
| u.cfg.n391 = min_t(unsigned int, conf->u.fr.n391, 255); |
| else |
| u.cfg.n391 = 2; |
| |
| if (conf->u.fr.n392) |
| u.cfg.n392 = min_t(unsigned int, conf->u.fr.n392, 10); |
| else |
| u.cfg.n392 = 3; |
| |
| if (conf->u.fr.n393) |
| u.cfg.n393 = min_t(unsigned int, conf->u.fr.n393, 10); |
| else |
| u.cfg.n393 = 4; |
| |
| if (fr_configure(card, &u.cfg)) |
| return -EIO; |
| |
| if (card->hw.type == SDLA_S514) { |
| |
| buf_info = (void*)(card->hw.dpmbase + FR_MB_VECTOR + |
| FR508_RXBC_OFFS); |
| |
| card->rxmb = (void*)(buf_info->rse_next + card->hw.dpmbase); |
| |
| card->u.f.rxmb_base = |
| (void*)(buf_info->rse_base + card->hw.dpmbase); |
| |
| card->u.f.rxmb_last = |
| (void*)(buf_info->rse_base + |
| (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) + |
| card->hw.dpmbase); |
| }else{ |
| buf_info = (void*)(card->hw.dpmbase + FR508_RXBC_OFFS); |
| |
| card->rxmb = (void*)(buf_info->rse_next - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| |
| card->u.f.rxmb_base = |
| (void*)(buf_info->rse_base - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| |
| card->u.f.rxmb_last = |
| (void*)(buf_info->rse_base + |
| (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| } |
| |
| card->u.f.rx_base = buf_info->buf_base; |
| card->u.f.rx_top = buf_info->buf_top; |
| |
| card->u.f.tx_interrupts_pending = 0; |
| |
| card->wandev.mtu = conf->mtu; |
| card->wandev.bps = conf->bps; |
| card->wandev.interface = conf->interface; |
| card->wandev.clocking = conf->clocking; |
| card->wandev.station = conf->station; |
| card->poll = NULL; |
| card->exec = &wpf_exec; |
| card->wandev.update = &update; |
| card->wandev.new_if = &new_if; |
| card->wandev.del_if = &del_if; |
| card->wandev.state = WAN_DISCONNECTED; |
| card->wandev.ttl = conf->ttl; |
| card->wandev.udp_port = conf->udp_port; |
| card->disable_comm = &disable_comm; |
| card->u.f.arp_dev = NULL; |
| |
| /* Intialize global statistics for a card */ |
| init_global_statistics( card ); |
| |
| card->TracingEnabled = 0; |
| |
| /* Interrupt Test */ |
| Intr_test_counter = 0; |
| card->intr_mode = INTR_TEST_MODE; |
| err = intr_test( card ); |
| |
| printk(KERN_INFO "%s: End of Interrupt Test rc=0x%x count=%i\n", |
| card->devname,err,Intr_test_counter); |
| |
| if (err || (Intr_test_counter < MAX_INTR_TEST_COUNTER)) { |
| printk(KERN_ERR "%s: Interrupt Test Failed, Counter: %i\n", |
| card->devname, Intr_test_counter); |
| printk(KERN_ERR "Please choose another interrupt\n"); |
| err = -EIO; |
| return err; |
| } |
| |
| printk(KERN_INFO "%s: Interrupt Test Passed, Counter: %i\n", |
| card->devname, Intr_test_counter); |
| |
| |
| /* Apr 28 2000. Nenad Corbic |
| * Enable commnunications here, not in if_open or new_if, since |
| * interfaces come down when the link is disconnected. |
| */ |
| |
| /* If you enable comms and then set ints, you get a Tx int as you |
| * perform the SET_INT_TRIGGERS command. So, we only set int |
| * triggers and then adjust the interrupt mask (to disable Tx ints) |
| * before enabling comms. |
| */ |
| if (fr_set_intr_mode(card, (FR_INTR_RXRDY | FR_INTR_TXRDY | |
| FR_INTR_DLC | FR_INTR_TIMER | FR_INTR_TX_MULT_DLCIs) , |
| card->wandev.mtu, 0)) { |
| return -EIO; |
| } |
| |
| flags->imask &= ~(FR_INTR_TXRDY | FR_INTR_TIMER); |
| |
| if (fr_comm_enable(card)) { |
| return -EIO; |
| } |
| wanpipe_set_state(card, WAN_CONNECTED); |
| spin_lock_init(&card->u.f.if_send_lock); |
| |
| printk(KERN_INFO "\n"); |
| |
| return 0; |
| } |
| |
| /******* WAN Device Driver Entry Points *************************************/ |
| |
| /*============================================================================ |
| * Update device status & statistics. |
| */ |
| static int update(struct wan_device* wandev) |
| { |
| volatile sdla_t* card; |
| unsigned long timeout; |
| fr508_flags_t* flags; |
| |
| /* sanity checks */ |
| if ((wandev == NULL) || (wandev->private == NULL)) |
| return -EFAULT; |
| |
| if (wandev->state == WAN_UNCONFIGURED) |
| return -ENODEV; |
| |
| card = wandev->private; |
| flags = card->flags; |
| |
| |
| card->u.f.update_comms_stats = 1; |
| card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UPDATE; |
| flags->imask |= FR_INTR_TIMER; |
| timeout = jiffies; |
| for(;;) { |
| if(card->u.f.update_comms_stats == 0) |
| break; |
| if ((jiffies - timeout) > (1 * HZ)){ |
| card->u.f.update_comms_stats = 0; |
| return -EAGAIN; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Create new logical channel. |
| * This routine is called by the router when ROUTER_IFNEW IOCTL is being |
| * handled. |
| * o parse media- and hardware-specific configuration |
| * o make sure that a new channel can be created |
| * o allocate resources, if necessary |
| * o prepare network device structure for registaration. |
| * |
| * Return: 0 o.k. |
| * < 0 failure (channel will not be created) |
| */ |
| static int new_if(struct wan_device* wandev, struct net_device* dev, |
| wanif_conf_t* conf) |
| { |
| sdla_t* card = wandev->private; |
| fr_channel_t* chan; |
| int dlci = 0; |
| int err = 0; |
| |
| |
| if ((conf->name[0] == '\0') || (strlen(conf->name) > WAN_IFNAME_SZ)) { |
| |
| printk(KERN_INFO "%s: Invalid interface name!\n", |
| card->devname); |
| return -EINVAL; |
| } |
| |
| /* allocate and initialize private data */ |
| chan = kmalloc(sizeof(fr_channel_t), GFP_KERNEL); |
| |
| if (chan == NULL) |
| return -ENOMEM; |
| |
| memset(chan, 0, sizeof(fr_channel_t)); |
| strcpy(chan->name, conf->name); |
| chan->card = card; |
| |
| /* verify media address */ |
| if (is_digit(conf->addr[0])) { |
| |
| dlci = dec_to_uint(conf->addr, 0); |
| |
| if (dlci && (dlci <= HIGHEST_VALID_DLCI)) { |
| |
| chan->dlci = dlci; |
| |
| } else { |
| |
| printk(KERN_ERR |
| "%s: Invalid DLCI %u on interface %s!\n", |
| wandev->name, dlci, chan->name); |
| err = -EINVAL; |
| } |
| |
| } else { |
| printk(KERN_ERR |
| "%s: Invalid media address on interface %s!\n", |
| wandev->name, chan->name); |
| err = -EINVAL; |
| } |
| |
| if ((chan->true_if_encoding = conf->true_if_encoding) == WANOPT_YES){ |
| printk(KERN_INFO |
| "%s: Enabling, true interface type encoding.\n", |
| card->devname); |
| } |
| |
| |
| |
| /* Setup wanpipe as a router (WANPIPE) even if it is |
| * a bridged DLCI, or as an API |
| */ |
| if (strcmp(conf->usedby, "WANPIPE") == 0 || |
| strcmp(conf->usedby, "BRIDGE") == 0 || |
| strcmp(conf->usedby, "BRIDGE_N") == 0){ |
| |
| if(strcmp(conf->usedby, "WANPIPE") == 0){ |
| chan->common.usedby = WANPIPE; |
| |
| printk(KERN_INFO "%s: Running in WANPIPE mode.\n", |
| card->devname); |
| |
| }else if(strcmp(conf->usedby, "BRIDGE") == 0){ |
| |
| chan->common.usedby = BRIDGE; |
| |
| printk(KERN_INFO "%s: Running in WANPIPE (BRIDGE) mode.\n", |
| card->devname); |
| }else if( strcmp(conf->usedby, "BRIDGE_N") == 0 ){ |
| |
| chan->common.usedby = BRIDGE_NODE; |
| |
| printk(KERN_INFO "%s: Running in WANPIPE (BRIDGE_NODE) mode.\n", |
| card->devname); |
| } |
| |
| if (!err){ |
| /* Dynamic interface configuration option. |
| * On disconnect, if the options is selected, |
| * the interface will be brought down */ |
| if (conf->if_down == WANOPT_YES){ |
| set_bit(DYN_OPT_ON,&chan->interface_down); |
| printk(KERN_INFO |
| "%s: Dynamic interface configuration enabled.\n", |
| card->devname); |
| } |
| } |
| |
| } else if(strcmp(conf->usedby, "API") == 0){ |
| |
| chan->common.usedby = API; |
| printk(KERN_INFO "%s: Running in API mode.\n", |
| wandev->name); |
| } |
| |
| if (err) { |
| |
| kfree(chan); |
| return err; |
| } |
| |
| /* place cir,be,bc and other channel specific information into the |
| * chan structure |
| */ |
| if (conf->cir) { |
| |
| chan->cir = max_t(unsigned int, 1, |
| min_t(unsigned int, conf->cir, 512)); |
| chan->cir_status = CIR_ENABLED; |
| |
| |
| /* If CIR is enabled, force BC to equal CIR |
| * this solves number of potential problems if CIR is |
| * set and BC is not |
| */ |
| chan->bc = chan->cir; |
| |
| if (conf->be){ |
| chan->be = max_t(unsigned int, |
| 0, min_t(unsigned int, conf->be, 511)); |
| }else{ |
| conf->be = 0; |
| } |
| |
| printk (KERN_INFO "%s: CIR enabled for DLCI %i \n", |
| wandev->name,chan->dlci); |
| printk (KERN_INFO "%s: CIR = %i ; BC = %i ; BE = %i\n", |
| wandev->name,chan->cir,chan->bc,chan->be); |
| |
| |
| }else{ |
| chan->cir_status = CIR_DISABLED; |
| printk (KERN_INFO "%s: CIR disabled for DLCI %i\n", |
| wandev->name,chan->dlci); |
| } |
| |
| chan->mc = conf->mc; |
| |
| if (conf->inarp == WANOPT_YES){ |
| printk(KERN_INFO "%s: Inverse ARP Support Enabled\n",card->devname); |
| chan->inarp = conf->inarp ? INARP_REQUEST : INARP_NONE; |
| chan->inarp_interval = conf->inarp_interval ? conf->inarp_interval : 10; |
| }else{ |
| printk(KERN_INFO "%s: Inverse ARP Support Disabled\n",card->devname); |
| chan->inarp = INARP_NONE; |
| chan->inarp_interval = 10; |
| } |
| |
| |
| chan->dlci_configured = DLCI_NOT_CONFIGURED; |
| |
| |
| /*FIXME: IPX disabled in this WANPIPE version */ |
| if (conf->enable_IPX == WANOPT_YES){ |
| printk(KERN_INFO "%s: ERROR - This version of WANPIPE doesn't support IPX\n", |
| card->devname); |
| kfree(chan); |
| return -EINVAL; |
| }else{ |
| chan->enable_IPX = WANOPT_NO; |
| } |
| |
| if (conf->network_number){ |
| chan->network_number = conf->network_number; |
| }else{ |
| chan->network_number = 0xDEADBEEF; |
| } |
| |
| chan->route_flag = NO_ROUTE; |
| |
| init_chan_statistics(chan); |
| |
| chan->transmit_length = 0; |
| |
| /* prepare network device data space for registration */ |
| strcpy(dev->name,chan->name); |
| |
| dev->init = &if_init; |
| dev->priv = chan; |
| |
| /* Initialize FR Polling Task Queue |
| * We need a poll routine for each network |
| * interface. |
| */ |
| INIT_WORK(&chan->fr_poll_work, (void *)fr_poll, dev); |
| |
| init_timer(&chan->fr_arp_timer); |
| chan->fr_arp_timer.data=(unsigned long)dev; |
| chan->fr_arp_timer.function = fr_arp; |
| |
| wandev->new_if_cnt++; |
| |
| /* Tells us that if this interface is a |
| * gateway or not */ |
| if ((chan->gateway = conf->gateway) == WANOPT_YES){ |
| printk(KERN_INFO "%s: Interface %s is set as a gateway.\n", |
| card->devname,dev->name); |
| } |
| |
| /* M. Grant Patch Apr 28 2000 |
| * Disallow duplicate dlci configurations. */ |
| if (card->u.f.dlci_to_dev_map[chan->dlci] != NULL) { |
| kfree(chan); |
| return -EBUSY; |
| } |
| |
| /* Configure this dlci at a later date, when |
| * the interface comes up. i.e. when if_open() |
| * executes */ |
| set_bit(0,&chan->config_dlci); |
| |
| printk(KERN_INFO "\n"); |
| |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Delete logical channel. |
| */ |
| static int del_if(struct wan_device* wandev, struct net_device* dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| unsigned long smp_flags=0; |
| |
| /* This interface is dead, make sure the |
| * ARP timer is stopped */ |
| del_timer(&chan->fr_arp_timer); |
| |
| /* If we are a NODE, we must unconfigure this DLCI |
| * Trigger an unconfigure command that will |
| * be executed in timer interrupt. We must wait |
| * for the command to complete. */ |
| trigger_unconfig_fr(dev); |
| |
| lock_adapter_irq(&wandev->lock, &smp_flags); |
| wandev->new_if_cnt--; |
| unlock_adapter_irq(&wandev->lock, &smp_flags); |
| |
| return 0; |
| } |
| |
| |
| /*===================================================================== |
| * disable_comm |
| * |
| * Description: |
| * Disable communications. |
| * This code runs in shutdown (sdlamain.c) |
| * under critical flag. Therefore it is not |
| * necessary to set a critical flag here |
| * |
| * Usage: |
| * Commnunications are disabled only on a card |
| * shutdown. |
| */ |
| |
| static void disable_comm (sdla_t *card) |
| { |
| printk(KERN_INFO "%s: Disabling Communications!\n", |
| card->devname); |
| fr_comm_disable(card); |
| } |
| |
| /****** WANPIPE-specific entry points ***************************************/ |
| |
| /*============================================================================ |
| * Execute adapter interface command. |
| */ |
| static int wpf_exec (struct sdla* card, void* u_cmd, void* u_data) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err, len; |
| fr_cmd_t cmd; |
| |
| if(copy_from_user((void*)&cmd, u_cmd, sizeof(cmd))) |
| return -EFAULT; |
| |
| /* execute command */ |
| do |
| { |
| memcpy(&mbox->cmd, &cmd, sizeof(cmd)); |
| |
| if (cmd.length){ |
| if( copy_from_user((void*)&mbox->data, u_data, cmd.length)) |
| return -EFAULT; |
| } |
| |
| if (sdla_exec(mbox)) |
| err = mbox->cmd.result; |
| |
| else return -EIO; |
| |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| /* return result */ |
| if (copy_to_user(u_cmd, (void*)&mbox->cmd, sizeof(fr_cmd_t))) |
| return -EFAULT; |
| |
| len = mbox->cmd.length; |
| |
| if (len && u_data && !copy_to_user(u_data, (void*)&mbox->data, len)) |
| return -EFAULT; |
| return 0; |
| } |
| |
| /****** Network Device Interface ********************************************/ |
| |
| /*============================================================================ |
| * Initialize Linux network interface. |
| * |
| * This routine is called only once for each interface, during Linux network |
| * interface registration. Returning anything but zero will fail interface |
| * registration. |
| */ |
| static int if_init(struct net_device* dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| struct wan_device* wandev = &card->wandev; |
| |
| /* Initialize device driver entry points */ |
| dev->open = &if_open; |
| dev->stop = &if_close; |
| dev->hard_header = NULL; |
| dev->rebuild_header = &if_rebuild_hdr; |
| dev->hard_start_xmit = &if_send; |
| dev->get_stats = &if_stats; |
| dev->tx_timeout = &if_tx_timeout; |
| dev->watchdog_timeo = TX_TIMEOUT; |
| |
| if (chan->common.usedby == WANPIPE || chan->common.usedby == API){ |
| |
| /* Initialize media-specific parameters */ |
| if (chan->true_if_encoding){ |
| dev->type = ARPHRD_DLCI; /* This breaks tcpdump */ |
| }else{ |
| dev->type = ARPHRD_PPP; /* ARP h/w type */ |
| } |
| |
| dev->flags |= IFF_POINTOPOINT; |
| dev->flags |= IFF_NOARP; |
| |
| /* Enable Multicast addressing */ |
| if (chan->mc == WANOPT_YES){ |
| dev->flags |= IFF_MULTICAST; |
| } |
| |
| dev->mtu = wandev->mtu - FR_HEADER_LEN; |
| /* For an API, the maximum number of bytes that the stack will pass |
| to the driver is (dev->mtu + dev->hard_header_len). So, adjust the |
| mtu so that a frame of maximum size can be transmitted by the API. |
| */ |
| if(chan->common.usedby == API) { |
| dev->mtu += (sizeof(api_tx_hdr_t) - FR_HEADER_LEN); |
| } |
| |
| dev->hard_header_len = FR_HEADER_LEN;/* media header length */ |
| dev->addr_len = 2; /* hardware address length */ |
| *(unsigned short*)dev->dev_addr = htons(chan->dlci); |
| |
| /* Set transmit buffer queue length */ |
| dev->tx_queue_len = 100; |
| |
| }else{ |
| |
| /* Setup the interface for Bridging */ |
| int hw_addr=0; |
| ether_setup(dev); |
| |
| /* Use a random number to generate the MAC address */ |
| memcpy(dev->dev_addr, "\xFE\xFC\x00\x00\x00\x00", 6); |
| get_random_bytes(&hw_addr, sizeof(hw_addr)); |
| *(int *)(dev->dev_addr + 2) += hw_addr; |
| } |
| |
| /* Initialize hardware parameters (just for reference) */ |
| dev->irq = wandev->irq; |
| dev->dma = wandev->dma; |
| dev->base_addr = wandev->ioport; |
| dev->mem_start = wandev->maddr; |
| dev->mem_end = wandev->maddr + wandev->msize - 1; |
| SET_MODULE_OWNER(dev); |
| |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Open network interface. |
| * o if this is the first open, then enable communications and interrupts. |
| * o prevent module from unloading by incrementing use count |
| * |
| * Return 0 if O.k. or errno. |
| */ |
| static int if_open(struct net_device* dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| int err = 0; |
| struct timeval tv; |
| |
| if (netif_running(dev)) |
| return -EBUSY; |
| |
| /* Initialize the task queue */ |
| chan->tq_working=0; |
| |
| INIT_WORK(&chan->common.wanpipe_work, (void *)fr_bh, dev); |
| |
| /* Allocate and initialize BH circular buffer */ |
| chan->bh_head = kmalloc((sizeof(bh_data_t)*MAX_BH_BUFF),GFP_ATOMIC); |
| memset(chan->bh_head,0,(sizeof(bh_data_t)*MAX_BH_BUFF)); |
| atomic_set(&chan->bh_buff_used, 0); |
| |
| netif_start_queue(dev); |
| |
| wanpipe_open(card); |
| do_gettimeofday( &tv ); |
| chan->router_start_time = tv.tv_sec; |
| |
| if (test_bit(0,&chan->config_dlci)){ |
| trigger_config_fr (card); |
| }else if (chan->inarp == INARP_REQUEST){ |
| trigger_fr_arp(dev); |
| } |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Close network interface. |
| * o if this is the last open, then disable communications and interrupts. |
| * o reset flags. |
| */ |
| static int if_close(struct net_device* dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| |
| if (chan->inarp == INARP_CONFIGURED) { |
| chan->inarp = INARP_REQUEST; |
| } |
| |
| netif_stop_queue(dev); |
| wanpipe_close(card); |
| |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Re-build media header. |
| * |
| * Return: 1 physical address resolved. |
| * 0 physical address not resolved |
| */ |
| static int if_rebuild_hdr (struct sk_buff* skb) |
| { |
| struct net_device *dev = skb->dev; |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| |
| printk(KERN_INFO "%s: rebuild_header() called for interface %s!\n", |
| card->devname, dev->name); |
| return 1; |
| } |
| |
| /*============================================================================ |
| * Handle transmit timeout event from netif watchdog |
| */ |
| static void if_tx_timeout(struct net_device *dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t *card = chan->card; |
| |
| /* If our device stays busy for at least 5 seconds then we will |
| * kick start the device by making dev->tbusy = 0. We expect |
| * that our device never stays busy more than 5 seconds. So this |
| * is only used as a last resort. |
| */ |
| |
| chan->drvstats_if_send.if_send_tbusy++; |
| ++chan->ifstats.collisions; |
| |
| printk (KERN_INFO "%s: Transmit timed out on %s\n", |
| card->devname, dev->name); |
| chan->drvstats_if_send.if_send_tbusy_timeout++; |
| netif_wake_queue (dev); |
| |
| } |
| |
| |
| /*============================================================================ |
| * Send a packet on a network interface. |
| * o set tbusy flag (marks start of the transmission) to block a timer-based |
| * transmit from overlapping. |
| * o set critical flag when accessing board. |
| * o check link state. If link is not up, then drop the packet. |
| * o check channel status. If it's down then initiate a call. |
| * o pass a packet to corresponding WAN device. |
| * o free socket buffer |
| * |
| * Return: 0 complete (socket buffer must be freed) |
| * non-0 packet may be re-transmitted (tbusy must be set) |
| * |
| * Notes: |
| * 1. This routine is called either by the protocol stack or by the "net |
| * bottom half" (with interrupts enabled). |
| * |
| * 2. Using netif_start_queue() and netif_stop_queue() |
| * will inhibit further transmit requests from the protocol stack |
| * and can be used for flow control with protocol layer. |
| */ |
| static int if_send(struct sk_buff* skb, struct net_device* dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| int err; |
| unsigned char *sendpacket; |
| fr508_flags_t* adptr_flags = card->flags; |
| int udp_type; |
| long delay_tx_queued = 0; |
| unsigned long smp_flags=0; |
| unsigned char attr = 0; |
| |
| chan->drvstats_if_send.if_send_entry++; |
| |
| netif_stop_queue(dev); |
| |
| if (skb == NULL) { |
| /* if we get here, some higher layer thinks we've missed an |
| * tx-done interrupt. |
| */ |
| printk(KERN_INFO "%s: interface %s got kicked!\n", |
| card->devname, dev->name); |
| chan->drvstats_if_send.if_send_skb_null ++; |
| |
| netif_wake_queue(dev); |
| return 0; |
| } |
| |
| /* If a peripheral task is running just drop packets */ |
| if (test_bit(PERI_CRIT, &card->wandev.critical)){ |
| |
| printk(KERN_INFO "%s: Critical in if_send(): Peripheral running!\n", |
| card->devname); |
| |
| dev_kfree_skb_any(skb); |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| /* We must set the 'tbusy' flag if we already have a packet queued for |
| transmission in the transmit interrupt handler. However, we must |
| ensure that the transmit interrupt does not reset the 'tbusy' flag |
| just before we set it, as this will result in a "transmit timeout". |
| */ |
| set_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical); |
| if(chan->transmit_length) { |
| netif_stop_queue(dev); |
| chan->tick_counter = jiffies; |
| clear_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical); |
| return 1; |
| } |
| clear_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical); |
| |
| /* Move the if_header() code to here. By inserting frame |
| * relay header in if_header() we would break the |
| * tcpdump and other packet sniffers */ |
| chan->fr_header_len = setup_fr_header(&skb,dev,chan->common.usedby); |
| if (chan->fr_header_len < 0 ){ |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| |
| dev_kfree_skb_any(skb); |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| sendpacket = skb->data; |
| |
| udp_type = udp_pkt_type(skb, card); |
| |
| if(udp_type != UDP_INVALID_TYPE) { |
| if(store_udp_mgmt_pkt(udp_type, UDP_PKT_FRM_STACK, card, skb, |
| chan->dlci)) { |
| adptr_flags->imask |= FR_INTR_TIMER; |
| if (udp_type == UDP_FPIPE_TYPE){ |
| chan->drvstats_if_send. |
| if_send_PIPE_request ++; |
| } |
| } |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| //FIXME: can we do better than sendpacket[2]? |
| if ((chan->common.usedby == WANPIPE) && (sendpacket[2] == 0x45)) { |
| |
| /* check to see if the source IP address is a broadcast or */ |
| /* multicast IP address */ |
| if(chk_bcast_mcast_addr(card, dev, skb)){ |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| dev_kfree_skb_any(skb); |
| netif_start_queue(dev); |
| return 0; |
| } |
| } |
| |
| |
| /* Lock the S514/S508 card: SMP Supported */ |
| s508_s514_lock(card,&smp_flags); |
| |
| if (test_and_set_bit(SEND_CRIT, (void*)&card->wandev.critical)) { |
| |
| chan->drvstats_if_send.if_send_critical_non_ISR ++; |
| chan->ifstats.tx_dropped ++; |
| printk(KERN_INFO "%s Critical in IF_SEND: if_send() already running!\n", |
| card->devname); |
| goto if_send_start_and_exit; |
| } |
| |
| /* API packet check: minimum packet size must be greater than |
| * 16 byte API header */ |
| if((chan->common.usedby == API) && (skb->len <= sizeof(api_tx_hdr_t))) { |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| |
| |
| goto if_send_start_and_exit; |
| |
| }else{ |
| /* During API transmission, get rid of the API header */ |
| if (chan->common.usedby == API) { |
| api_tx_hdr_t* api_tx_hdr; |
| api_tx_hdr = (api_tx_hdr_t*)&skb->data[0x00]; |
| attr = api_tx_hdr->attr; |
| skb_pull(skb,sizeof(api_tx_hdr_t)); |
| } |
| } |
| |
| if (card->wandev.state != WAN_CONNECTED) { |
| chan->drvstats_if_send.if_send_wan_disconnected ++; |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| |
| } else if (chan->common.state != WAN_CONNECTED) { |
| chan->drvstats_if_send.if_send_dlci_disconnected ++; |
| |
| /* Update the DLCI state in timer interrupt */ |
| card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UPDATE_STATE; |
| adptr_flags->imask |= FR_INTR_TIMER; |
| |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| |
| } else if (!is_tx_ready(card, chan)) { |
| /* No tx buffers available, store for delayed transmit */ |
| if (!setup_for_delayed_transmit(dev, skb)){ |
| set_bit(1,&delay_tx_queued); |
| } |
| chan->drvstats_if_send.if_send_no_bfrs++; |
| |
| } else if (!skb->protocol) { |
| /* No protocols drop packet */ |
| chan->drvstats_if_send.if_send_protocol_error ++; |
| ++card->wandev.stats.tx_errors; |
| |
| } else if (test_bit(ARP_CRIT,&card->wandev.critical)){ |
| /* We are trying to send an ARP Packet, block IP data until |
| * ARP is sent */ |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| |
| } else { |
| //FIXME: IPX is not implemented in this version of Frame Relay ? |
| if((chan->common.usedby == WANPIPE) && |
| sendpacket[1] == 0x00 && |
| sendpacket[2] == 0x80 && |
| sendpacket[6] == 0x81 && |
| sendpacket[7] == 0x37) { |
| |
| if( chan->enable_IPX ) { |
| switch_net_numbers(sendpacket, |
| chan->network_number, 0); |
| } else { |
| //FIXME: Take this out when IPX is fixed |
| printk(KERN_INFO |
| "%s: WARNING: Unsupported IPX data in send, packet dropped\n", |
| card->devname); |
| } |
| |
| }else{ |
| err = fr_send_data_header(card, chan->dlci, attr, skb->len, skb->data, chan->fr_header_len); |
| if (err) { |
| switch(err) { |
| case FRRES_CIR_OVERFLOW: |
| case FRRES_BUFFER_OVERFLOW: |
| if (!setup_for_delayed_transmit(dev, skb)){ |
| set_bit(1,&delay_tx_queued); |
| } |
| chan->drvstats_if_send. |
| if_send_adptr_bfrs_full ++; |
| break; |
| |
| case FRRES_TOO_LONG: |
| if (net_ratelimit()){ |
| printk(KERN_INFO |
| "%s: Error: Frame too long, transmission failed %i\n", |
| card->devname, (unsigned int)skb->len); |
| } |
| /* Drop down to default */ |
| default: |
| chan->drvstats_if_send. |
| if_send_dlci_disconnected ++; |
| ++chan->ifstats.tx_dropped; |
| ++card->wandev.stats.tx_dropped; |
| break; |
| } |
| } else { |
| chan->drvstats_if_send. |
| if_send_bfr_passed_to_adptr++; |
| ++chan->ifstats.tx_packets; |
| ++card->wandev.stats.tx_packets; |
| |
| chan->ifstats.tx_bytes += skb->len; |
| card->wandev.stats.tx_bytes += skb->len; |
| dev->trans_start = jiffies; |
| } |
| } |
| } |
| |
| if_send_start_and_exit: |
| |
| netif_start_queue(dev); |
| |
| /* If we queued the packet for transmission, we must not |
| * deallocate it. The packet is unlinked from the IP stack |
| * not copied. Therefore, we must keep the original packet */ |
| if (!test_bit(1,&delay_tx_queued)) { |
| dev_kfree_skb_any(skb); |
| }else{ |
| adptr_flags->imask |= FR_INTR_TXRDY; |
| card->u.f.tx_interrupts_pending ++; |
| } |
| |
| clear_bit(SEND_CRIT, (void*)&card->wandev.critical); |
| |
| s508_s514_unlock(card,&smp_flags); |
| |
| return 0; |
| } |
| |
| |
| |
| /*============================================================================ |
| * Setup so that a frame can be transmitted on the occurrence of a transmit |
| * interrupt. |
| */ |
| static int setup_for_delayed_transmit(struct net_device* dev, |
| struct sk_buff *skb) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| fr_dlci_interface_t* dlci_interface; |
| int len = skb->len; |
| |
| /* Check that the dlci is properly configured, |
| * before using tx interrupt */ |
| if (!chan->dlci_int_interface){ |
| if (net_ratelimit()){ |
| printk(KERN_INFO |
| "%s: ERROR on DLCI %i: Not configured properly !\n", |
| card->devname, chan->dlci); |
| printk(KERN_INFO "%s: Please contact Sangoma Technologies\n", |
| card->devname); |
| } |
| return 1; |
| } |
| |
| dlci_interface = chan->dlci_int_interface; |
| |
| if(chan->transmit_length) { |
| printk(KERN_INFO "%s: Big mess in setup_for_del...\n", |
| card->devname); |
| return 1; |
| } |
| |
| if(len > FR_MAX_NO_DATA_BYTES_IN_FRAME) { |
| //FIXME: increment some statistic */ |
| return 1; |
| } |
| |
| skb_unlink(skb); |
| |
| chan->transmit_length = len; |
| chan->delay_skb = skb; |
| |
| dlci_interface->gen_interrupt |= FR_INTR_TXRDY; |
| dlci_interface->packet_length = len; |
| |
| /* Turn on TX interrupt at the end of if_send */ |
| return 0; |
| } |
| |
| |
| /*============================================================================ |
| * Check to see if the packet to be transmitted contains a broadcast or |
| * multicast source IP address. |
| * Return 0 if not broadcast/multicast address, otherwise return 1. |
| */ |
| |
| static int chk_bcast_mcast_addr(sdla_t *card, struct net_device* dev, |
| struct sk_buff *skb) |
| { |
| u32 src_ip_addr; |
| u32 broadcast_ip_addr = 0; |
| struct in_device *in_dev; |
| fr_channel_t* chan = dev->priv; |
| |
| /* read the IP source address from the outgoing packet */ |
| src_ip_addr = *(u32 *)(skb->data + 14); |
| |
| /* read the IP broadcast address for the device */ |
| in_dev = dev->ip_ptr; |
| if(in_dev != NULL) { |
| struct in_ifaddr *ifa= in_dev->ifa_list; |
| if(ifa != NULL) |
| broadcast_ip_addr = ifa->ifa_broadcast; |
| else |
| return 0; |
| } |
| |
| /* check if the IP Source Address is a Broadcast address */ |
| if((dev->flags & IFF_BROADCAST) && (src_ip_addr == broadcast_ip_addr)) { |
| printk(KERN_INFO |
| "%s: Broadcast Source Address silently discarded\n", |
| card->devname); |
| return 1; |
| } |
| |
| /* check if the IP Source Address is a Multicast address */ |
| if((chan->mc == WANOPT_NO) && (ntohl(src_ip_addr) >= 0xE0000001) && |
| (ntohl(src_ip_addr) <= 0xFFFFFFFE)) { |
| printk(KERN_INFO |
| "%s: Multicast Source Address silently discarded\n", |
| card->devname); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Reply to UDP Management system. |
| * Return nothing. |
| */ |
| static int reply_udp( unsigned char *data, unsigned int mbox_len ) |
| { |
| unsigned short len, udp_length, temp, ip_length; |
| unsigned long ip_temp; |
| int even_bound = 0; |
| |
| |
| fr_udp_pkt_t *fr_udp_pkt = (fr_udp_pkt_t *)data; |
| |
| /* Set length of packet */ |
| len = //sizeof(fr_encap_hdr_t)+ |
| sizeof(ip_pkt_t)+ |
| sizeof(udp_pkt_t)+ |
| sizeof(wp_mgmt_t)+ |
| sizeof(cblock_t)+ |
| mbox_len; |
| |
| |
| /* fill in UDP reply */ |
| fr_udp_pkt->wp_mgmt.request_reply = UDPMGMT_REPLY; |
| |
| /* fill in UDP length */ |
| udp_length = sizeof(udp_pkt_t)+ |
| sizeof(wp_mgmt_t)+ |
| sizeof(cblock_t)+ |
| mbox_len; |
| |
| |
| /* put it on an even boundary */ |
| if ( udp_length & 0x0001 ) { |
| udp_length += 1; |
| len += 1; |
| even_bound = 1; |
| } |
| |
| temp = (udp_length<<8)|(udp_length>>8); |
| fr_udp_pkt->udp_pkt.udp_length = temp; |
| |
| /* swap UDP ports */ |
| temp = fr_udp_pkt->udp_pkt.udp_src_port; |
| fr_udp_pkt->udp_pkt.udp_src_port = |
| fr_udp_pkt->udp_pkt.udp_dst_port; |
| fr_udp_pkt->udp_pkt.udp_dst_port = temp; |
| |
| |
| |
| /* add UDP pseudo header */ |
| temp = 0x1100; |
| *((unsigned short *) |
| (fr_udp_pkt->data+mbox_len+even_bound)) = temp; |
| temp = (udp_length<<8)|(udp_length>>8); |
| *((unsigned short *) |
| (fr_udp_pkt->data+mbox_len+even_bound+2)) = temp; |
| |
| /* calculate UDP checksum */ |
| fr_udp_pkt->udp_pkt.udp_checksum = 0; |
| |
| fr_udp_pkt->udp_pkt.udp_checksum = |
| calc_checksum(&data[UDP_OFFSET/*+sizeof(fr_encap_hdr_t)*/], |
| udp_length+UDP_OFFSET); |
| |
| /* fill in IP length */ |
| ip_length = udp_length + sizeof(ip_pkt_t); |
| temp = (ip_length<<8)|(ip_length>>8); |
| fr_udp_pkt->ip_pkt.total_length = temp; |
| |
| /* swap IP addresses */ |
| ip_temp = fr_udp_pkt->ip_pkt.ip_src_address; |
| fr_udp_pkt->ip_pkt.ip_src_address = |
| fr_udp_pkt->ip_pkt.ip_dst_address; |
| fr_udp_pkt->ip_pkt.ip_dst_address = ip_temp; |
| |
| |
| /* fill in IP checksum */ |
| fr_udp_pkt->ip_pkt.hdr_checksum = 0; |
| fr_udp_pkt->ip_pkt.hdr_checksum = |
| calc_checksum(&data[/*sizeof(fr_encap_hdr_t)*/0], |
| sizeof(ip_pkt_t)); |
| |
| return len; |
| } /* reply_udp */ |
| |
| unsigned short calc_checksum (char *data, int len) |
| { |
| unsigned short temp; |
| unsigned long sum=0; |
| int i; |
| |
| for( i = 0; i <len; i+=2 ) { |
| memcpy(&temp,&data[i],2); |
| sum += (unsigned long)temp; |
| } |
| |
| while (sum >> 16 ) { |
| sum = (sum & 0xffffUL) + (sum >> 16); |
| } |
| |
| temp = (unsigned short)sum; |
| temp = ~temp; |
| |
| if( temp == 0 ) |
| temp = 0xffff; |
| |
| return temp; |
| } |
| |
| /* |
| If incoming is 0 (outgoing)- if the net numbers is ours make it 0 |
| if incoming is 1 - if the net number is 0 make it ours |
| |
| */ |
| static void switch_net_numbers(unsigned char *sendpacket, unsigned long network_number, unsigned char incoming) |
| { |
| unsigned long pnetwork_number; |
| |
| pnetwork_number = (unsigned long)((sendpacket[14] << 24) + |
| (sendpacket[15] << 16) + (sendpacket[16] << 8) + |
| sendpacket[17]); |
| |
| if (!incoming) { |
| /* If the destination network number is ours, make it 0 */ |
| if( pnetwork_number == network_number) { |
| sendpacket[14] = sendpacket[15] = sendpacket[16] = |
| sendpacket[17] = 0x00; |
| } |
| } else { |
| /* If the incoming network is 0, make it ours */ |
| if( pnetwork_number == 0) { |
| sendpacket[14] = (unsigned char)(network_number >> 24); |
| sendpacket[15] = (unsigned char)((network_number & |
| 0x00FF0000) >> 16); |
| sendpacket[16] = (unsigned char)((network_number & |
| 0x0000FF00) >> 8); |
| sendpacket[17] = (unsigned char)(network_number & |
| 0x000000FF); |
| } |
| } |
| |
| |
| pnetwork_number = (unsigned long)((sendpacket[26] << 24) + |
| (sendpacket[27] << 16) + (sendpacket[28] << 8) + |
| sendpacket[29]); |
| |
| if( !incoming ) { |
| /* If the source network is ours, make it 0 */ |
| if( pnetwork_number == network_number) { |
| sendpacket[26] = sendpacket[27] = sendpacket[28] = |
| sendpacket[29] = 0x00; |
| } |
| } else { |
| /* If the source network is 0, make it ours */ |
| if( pnetwork_number == 0 ) { |
| sendpacket[26] = (unsigned char)(network_number >> 24); |
| sendpacket[27] = (unsigned char)((network_number & |
| 0x00FF0000) >> 16); |
| sendpacket[28] = (unsigned char)((network_number & |
| 0x0000FF00) >> 8); |
| sendpacket[29] = (unsigned char)(network_number & |
| 0x000000FF); |
| } |
| } |
| } /* switch_net_numbers */ |
| |
| /*============================================================================ |
| * Get ethernet-style interface statistics. |
| * Return a pointer to struct enet_statistics. |
| */ |
| static struct net_device_stats *if_stats(struct net_device *dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| |
| if(chan == NULL) |
| return NULL; |
| |
| return &chan->ifstats; |
| } |
| |
| /****** Interrupt Handlers **************************************************/ |
| |
| /*============================================================================ |
| * fr_isr: S508 frame relay interrupt service routine. |
| * |
| * Description: |
| * Frame relay main interrupt service route. This |
| * function check the interrupt type and takes |
| * the appropriate action. |
| */ |
| static void fr_isr (sdla_t* card) |
| { |
| fr508_flags_t* flags = card->flags; |
| char *ptr = &flags->iflag; |
| int i,err; |
| fr_mbox_t* mbox = card->mbox; |
| |
| /* This flag prevents nesting of interrupts. See sdla_isr() routine |
| * in sdlamain.c. */ |
| card->in_isr = 1; |
| |
| ++card->statistics.isr_entry; |
| |
| |
| /* All peripheral (configuraiton, re-configuration) events |
| * take presidence over the ISR. Thus, retrigger */ |
| if (test_bit(PERI_CRIT, (void*)&card->wandev.critical)) { |
| ++card->statistics.isr_already_critical; |
| goto fr_isr_exit; |
| } |
| |
| if(card->hw.type != SDLA_S514) { |
| if (test_bit(SEND_CRIT, (void*)&card->wandev.critical)) { |
| printk(KERN_INFO "%s: Critical while in ISR: If Send Running!\n", |
| card->devname); |
| ++card->statistics.isr_already_critical; |
| goto fr_isr_exit; |
| } |
| } |
| |
| switch (flags->iflag) { |
| |
| case FR_INTR_RXRDY: /* receive interrupt */ |
| ++card->statistics.isr_rx; |
| rx_intr(card); |
| break; |
| |
| |
| case FR_INTR_TXRDY: /* transmit interrupt */ |
| ++ card->statistics.isr_tx; |
| tx_intr(card); |
| break; |
| |
| case FR_INTR_READY: |
| Intr_test_counter++; |
| ++card->statistics.isr_intr_test; |
| break; |
| |
| case FR_INTR_DLC: /* Event interrupt occurred */ |
| mbox->cmd.command = FR_READ_STATUS; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err) |
| fr_event(card, err, mbox); |
| break; |
| |
| case FR_INTR_TIMER: /* Timer interrupt */ |
| timer_intr(card); |
| break; |
| |
| default: |
| ++card->statistics.isr_spurious; |
| spur_intr(card); |
| printk(KERN_INFO "%s: Interrupt Type 0x%02X!\n", |
| card->devname, flags->iflag); |
| |
| printk(KERN_INFO "%s: ID Bytes = ",card->devname); |
| for(i = 0; i < 8; i ++) |
| printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i)); |
| printk(KERN_INFO "\n"); |
| |
| break; |
| } |
| |
| fr_isr_exit: |
| |
| card->in_isr = 0; |
| flags->iflag = 0; |
| return; |
| } |
| |
| |
| |
| /*=========================================================== |
| * rx_intr Receive interrupt handler. |
| * |
| * Description |
| * Upon receiveing an interrupt: |
| * 1. Check that the firmware is in sync with |
| * the driver. |
| * 2. Find an appropriate network interface |
| * based on the received dlci number. |
| * 3. Check that the netowrk interface exists |
| * and that it's setup properly. |
| * 4. Copy the data into an skb buffer. |
| * 5. Check the packet type and take |
| * appropriate acton: UPD, API, ARP or Data. |
| */ |
| |
| static void rx_intr (sdla_t* card) |
| { |
| fr_rx_buf_ctl_t* frbuf = card->rxmb; |
| fr508_flags_t* flags = card->flags; |
| fr_channel_t* chan; |
| char *ptr = &flags->iflag; |
| struct sk_buff* skb; |
| struct net_device* dev; |
| void* buf; |
| unsigned dlci, len, offs, len_incl_hdr; |
| int i, udp_type; |
| |
| |
| /* Check that firmware buffers are in sync */ |
| if (frbuf->flag != 0x01) { |
| |
| printk(KERN_INFO |
| "%s: corrupted Rx buffer @ 0x%X, flag = 0x%02X!\n", |
| card->devname, (unsigned)frbuf, frbuf->flag); |
| |
| printk(KERN_INFO "%s: ID Bytes = ",card->devname); |
| for(i = 0; i < 8; i ++) |
| printk(KERN_INFO "0x%02X ", *(ptr + 0x28 + i)); |
| printk(KERN_INFO "\n"); |
| |
| ++card->statistics.rx_intr_corrupt_rx_bfr; |
| |
| /* Bug Fix: Mar 6 2000 |
| * If we get a corrupted mailbox, it means that driver |
| * is out of sync with the firmware. There is no recovery. |
| * If we don't turn off all interrupts for this card |
| * the machine will crash. |
| */ |
| printk(KERN_INFO "%s: Critical router failure ...!!!\n", card->devname); |
| printk(KERN_INFO "Please contact Sangoma Technologies !\n"); |
| fr_set_intr_mode(card, 0, 0, 0); |
| return; |
| } |
| |
| len = frbuf->length; |
| dlci = frbuf->dlci; |
| offs = frbuf->offset; |
| |
| /* Find the network interface for this packet */ |
| dev = find_channel(card, dlci); |
| |
| |
| /* Check that the network interface is active and |
| * properly setup */ |
| if (dev == NULL) { |
| if( net_ratelimit()) { |
| printk(KERN_INFO "%s: received data on unconfigured DLCI %d!\n", |
| card->devname, dlci); |
| } |
| ++card->statistics.rx_intr_on_orphaned_DLCI; |
| ++card->wandev.stats.rx_dropped; |
| goto rx_done; |
| } |
| |
| if ((chan = dev->priv) == NULL){ |
| if( net_ratelimit()) { |
| printk(KERN_INFO "%s: received data on unconfigured DLCI %d!\n", |
| card->devname, dlci); |
| } |
| ++card->statistics.rx_intr_on_orphaned_DLCI; |
| ++card->wandev.stats.rx_dropped; |
| goto rx_done; |
| } |
| |
| skb = dev_alloc_skb(len); |
| |
| if (!netif_running(dev) || (skb == NULL)){ |
| |
| ++chan->ifstats.rx_dropped; |
| |
| if(skb == NULL) { |
| if (net_ratelimit()) { |
| printk(KERN_INFO |
| "%s: no socket buffers available!\n", |
| card->devname); |
| } |
| chan->drvstats_rx_intr.rx_intr_no_socket ++; |
| } |
| |
| if (!netif_running(dev)){ |
| chan->drvstats_rx_intr. |
| rx_intr_dev_not_started ++; |
| if (skb){ |
| dev_kfree_skb_any(skb); |
| } |
| } |
| goto rx_done; |
| } |
| |
| /* Copy data from the board into the socket buffer */ |
| if ((offs + len) > card->u.f.rx_top + 1) { |
| unsigned tmp = card->u.f.rx_top - offs + 1; |
| |
| buf = skb_put(skb, tmp); |
| sdla_peek(&card->hw, offs, buf, tmp); |
| offs = card->u.f.rx_base; |
| len -= tmp; |
| } |
| |
| buf = skb_put(skb, len); |
| sdla_peek(&card->hw, offs, buf, len); |
| |
| |
| /* We got the packet from the bard. |
| * Check the packet type and take appropriate action */ |
| |
| udp_type = udp_pkt_type( skb, card ); |
| |
| if(udp_type != UDP_INVALID_TYPE) { |
| |
| /* UDP Debug packet received, store the |
| * packet and handle it in timer interrupt */ |
| |
| skb_pull(skb, 1); |
| if (wanrouter_type_trans(skb, dev)){ |
| if(store_udp_mgmt_pkt(udp_type,UDP_PKT_FRM_NETWORK,card,skb,dlci)){ |
| |
| flags->imask |= FR_INTR_TIMER; |
| |
| if (udp_type == UDP_FPIPE_TYPE){ |
| ++chan->drvstats_rx_intr.rx_intr_PIPE_request; |
| } |
| } |
| } |
| |
| }else if (chan->common.usedby == API) { |
| |
| /* We are in API mode. |
| * Add an API header to the RAW packet |
| * and queue it into a circular buffer. |
| * Then kick the fr_bh() bottom half handler */ |
| |
| api_rx_hdr_t* api_rx_hdr; |
| chan->drvstats_rx_intr.rx_intr_bfr_passed_to_stack ++; |
| chan->ifstats.rx_packets ++; |
| card->wandev.stats.rx_packets ++; |
| |
| chan->ifstats.rx_bytes += skb->len; |
| card->wandev.stats.rx_bytes += skb->len; |
| |
| skb_push(skb, sizeof(api_rx_hdr_t)); |
| api_rx_hdr = (api_rx_hdr_t*)&skb->data[0x00]; |
| api_rx_hdr->attr = frbuf->attr; |
| api_rx_hdr->time_stamp = frbuf->tmstamp; |
| |
| skb->protocol = htons(ETH_P_IP); |
| skb->mac.raw = skb->data; |
| skb->dev = dev; |
| skb->pkt_type = WAN_PACKET_DATA; |
| |
| bh_enqueue(dev, skb); |
| |
| trigger_fr_bh(chan); |
| |
| }else if (handle_IPXWAN(skb->data,chan->name,chan->enable_IPX, chan->network_number)){ |
| |
| //FIXME: Frame Relay IPX is not supported, Yet ! |
| //if (chan->enable_IPX) { |
| // fr_send(card, dlci, 0, skb->len,skb->data); |
| //} |
| dev_kfree_skb_any(skb); |
| |
| } else if (is_arp(skb->data)) { |
| |
| /* ARP support enabled Mar 16 2000 |
| * Process incoming ARP reply/request, setup |
| * dynamic routes. */ |
| |
| if (process_ARP((arphdr_1490_t *)skb->data, card, dev)) { |
| if (net_ratelimit()){ |
| printk (KERN_INFO |
| "%s: Error processing ARP Packet.\n", |
| card->devname); |
| } |
| } |
| dev_kfree_skb_any(skb); |
| |
| } else if (skb->data[0] != 0x03) { |
| |
| if (net_ratelimit()) { |
| printk(KERN_INFO "%s: Non IETF packet discarded.\n", |
| card->devname); |
| } |
| dev_kfree_skb_any(skb); |
| |
| } else { |
| |
| len_incl_hdr = skb->len; |
| /* Decapsulate packet and pass it up the |
| protocol stack */ |
| skb->dev = dev; |
| |
| if (chan->common.usedby == BRIDGE || chan->common.usedby == BRIDGE_NODE){ |
| |
| /* Make sure it's an Ethernet frame, otherwise drop it */ |
| if (!memcmp(skb->data, "\x03\x00\x80\x00\x80\xC2\x00\x07", 8)) { |
| skb_pull(skb, 8); |
| skb->protocol=eth_type_trans(skb,dev); |
| }else{ |
| ++chan->drvstats_rx_intr.rx_intr_bfr_not_passed_to_stack; |
| ++chan->ifstats.rx_errors; |
| ++card->wandev.stats.rx_errors; |
| goto rx_done; |
| } |
| }else{ |
| |
| /* remove hardware header */ |
| buf = skb_pull(skb, 1); |
| |
| if (!wanrouter_type_trans(skb, dev)) { |
| |
| /* can't decapsulate packet */ |
| dev_kfree_skb_any(skb); |
| |
| ++chan->drvstats_rx_intr.rx_intr_bfr_not_passed_to_stack; |
| ++chan->ifstats.rx_errors; |
| ++card->wandev.stats.rx_errors; |
| goto rx_done; |
| } |
| skb->mac.raw = skb->data; |
| } |
| |
| |
| /* Send a packet up the IP stack */ |
| skb->dev->last_rx = jiffies; |
| netif_rx(skb); |
| ++chan->drvstats_rx_intr.rx_intr_bfr_passed_to_stack; |
| ++chan->ifstats.rx_packets; |
| ++card->wandev.stats.rx_packets; |
| |
| chan->ifstats.rx_bytes += len_incl_hdr; |
| card->wandev.stats.rx_bytes += len_incl_hdr; |
| } |
| |
| rx_done: |
| |
| /* Release buffer element and calculate a pointer to the next one */ |
| frbuf->flag = 0; |
| card->rxmb = ++frbuf; |
| if ((void*)frbuf > card->u.f.rxmb_last) |
| card->rxmb = card->u.f.rxmb_base; |
| |
| } |
| |
| /*================================================================== |
| * tx_intr: Transmit interrupt handler. |
| * |
| * Rationale: |
| * If the board is busy transmitting, if_send() will |
| * buffers a single packet and turn on |
| * the tx interrupt. Tx interrupt will be called |
| * by the board, once the firmware can send more |
| * data. Thus, no polling is required. |
| * |
| * Description: |
| * Tx interrupt is called for each |
| * configured dlci channel. Thus: |
| * 1. Obtain the netowrk interface based on the |
| * dlci number. |
| * 2. Check that network interface is up and |
| * properly setup. |
| * 3. Check for a buffered packet. |
| * 4. Transmit the packet. |
| * 5. If we are in WANPIPE mode, mark the |
| * NET_BH handler. |
| * 6. If we are in API mode, kick |
| * the AF_WANPIPE socket for more data. |
| * |
| */ |
| static void tx_intr(sdla_t *card) |
| { |
| fr508_flags_t* flags = card->flags; |
| fr_tx_buf_ctl_t* bctl; |
| struct net_device* dev; |
| fr_channel_t* chan; |
| |
| if(card->hw.type == SDLA_S514){ |
| bctl = (void*)(flags->tse_offs + card->hw.dpmbase); |
| }else{ |
| bctl = (void*)(flags->tse_offs - FR_MB_VECTOR + |
| card->hw.dpmbase); |
| } |
| |
| /* Find the structure and make it unbusy */ |
| dev = find_channel(card, flags->dlci); |
| if (dev == NULL){ |
| printk(KERN_INFO "NO DEV IN TX Interrupt\n"); |
| goto end_of_tx_intr; |
| } |
| |
| if ((chan = dev->priv) == NULL){ |
| printk(KERN_INFO "NO CHAN IN TX Interrupt\n"); |
| goto end_of_tx_intr; |
| } |
| |
| if(!chan->transmit_length || !chan->delay_skb) { |
| printk(KERN_INFO "%s: tx int error - transmit length zero\n", |
| card->wandev.name); |
| goto end_of_tx_intr; |
| } |
| |
| /* If the 'if_send()' procedure is currently checking the 'tbusy' |
| status, then we cannot transmit. Instead, we configure the microcode |
| so as to re-issue this transmit interrupt at a later stage. |
| */ |
| if (test_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical)) { |
| |
| fr_dlci_interface_t* dlci_interface = chan->dlci_int_interface; |
| bctl->flag = 0xA0; |
| dlci_interface->gen_interrupt |= FR_INTR_TXRDY; |
| return; |
| |
| }else{ |
| bctl->dlci = flags->dlci; |
| bctl->length = chan->transmit_length+chan->fr_header_len; |
| sdla_poke(&card->hw, |
| fr_send_hdr(card,bctl->dlci,bctl->offset), |
| chan->delay_skb->data, |
| chan->delay_skb->len); |
| bctl->flag = 0xC0; |
| |
| ++chan->ifstats.tx_packets; |
| ++card->wandev.stats.tx_packets; |
| chan->ifstats.tx_bytes += chan->transmit_length; |
| card->wandev.stats.tx_bytes += chan->transmit_length; |
| |
| /* We must free an sk buffer, which we used |
| * for delayed transmission; Otherwise, the sock |
| * will run out of memory */ |
| dev_kfree_skb_any(chan->delay_skb); |
| |
| chan->delay_skb = NULL; |
| chan->transmit_length = 0; |
| |
| dev->trans_start = jiffies; |
| |
| if (netif_queue_stopped(dev)){ |
| /* If using API, than wakeup socket BH handler */ |
| if (chan->common.usedby == API){ |
| netif_start_queue(dev); |
| wakeup_sk_bh(dev); |
| }else{ |
| netif_wake_queue(dev); |
| } |
| } |
| } |
| |
| end_of_tx_intr: |
| |
| /* if any other interfaces have transmit interrupts pending, |
| * do not disable the global transmit interrupt */ |
| if(!(-- card->u.f.tx_interrupts_pending)) |
| flags->imask &= ~FR_INTR_TXRDY; |
| |
| |
| } |
| |
| |
| /*============================================================================ |
| * timer_intr: Timer interrupt handler. |
| * |
| * Rationale: |
| * All commans must be executed within the timer |
| * interrupt since no two commands should execute |
| * at the same time. |
| * |
| * Description: |
| * The timer interrupt is used to: |
| * 1. Processing udp calls from 'fpipemon'. |
| * 2. Processing update calls from /proc file system |
| * 3. Reading board-level statistics for |
| * updating the proc file system. |
| * 4. Sending inverse ARP request packets. |
| * 5. Configure a dlci/channel. |
| * 6. Unconfigure a dlci/channel. (Node only) |
| */ |
| |
| static void timer_intr(sdla_t *card) |
| { |
| fr508_flags_t* flags = card->flags; |
| |
| /* UDP Debuging: fpipemon call */ |
| if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UDP) { |
| if(card->u.f.udp_type == UDP_FPIPE_TYPE) { |
| if(process_udp_mgmt_pkt(card)) { |
| card->u.f.timer_int_enabled &= |
| ~TMR_INT_ENABLED_UDP; |
| } |
| } |
| } |
| |
| /* /proc update call : triggered from update() */ |
| if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UPDATE) { |
| fr_get_err_stats(card); |
| fr_get_stats(card); |
| card->u.f.update_comms_stats = 0; |
| card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE; |
| } |
| |
| /* Update the channel state call. This is call is |
| * triggered by if_send() function */ |
| if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UPDATE_STATE){ |
| struct net_device *dev; |
| if (card->wandev.state == WAN_CONNECTED){ |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)){ |
| fr_channel_t *chan = dev->priv; |
| if (chan->common.state != WAN_CONNECTED){ |
| update_chan_state(dev); |
| } |
| } |
| } |
| card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE_STATE; |
| } |
| |
| /* configure a dlci/channel */ |
| if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_CONFIG){ |
| config_fr(card); |
| card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_CONFIG; |
| } |
| |
| /* unconfigure a dlci/channel */ |
| if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_UNCONFIG){ |
| unconfig_fr(card); |
| card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UNCONFIG; |
| } |
| |
| |
| /* Transmit ARP packets */ |
| if (card->u.f.timer_int_enabled & TMR_INT_ENABLED_ARP){ |
| int i=0; |
| struct net_device *dev; |
| |
| if (card->u.f.arp_dev == NULL) |
| card->u.f.arp_dev = card->wandev.dev; |
| |
| dev = card->u.f.arp_dev; |
| |
| for (;;){ |
| |
| fr_channel_t *chan = dev->priv; |
| |
| /* If the interface is brought down cancel sending In-ARPs */ |
| if (!(dev->flags&IFF_UP)){ |
| clear_bit(0,&chan->inarp_ready); |
| } |
| |
| if (test_bit(0,&chan->inarp_ready)){ |
| |
| if (check_tx_status(card,dev)){ |
| set_bit(ARP_CRIT,&card->wandev.critical); |
| break; |
| } |
| |
| if (!send_inarp_request(card,dev)){ |
| trigger_fr_arp(dev); |
| chan->inarp_tick = jiffies; |
| } |
| |
| clear_bit(0,&chan->inarp_ready); |
| dev = move_dev_to_next(card,dev); |
| break; |
| } |
| dev = move_dev_to_next(card,dev); |
| |
| if (++i == card->wandev.new_if_cnt){ |
| card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_ARP; |
| break; |
| } |
| } |
| card->u.f.arp_dev = dev; |
| } |
| |
| if(!card->u.f.timer_int_enabled) |
| flags->imask &= ~FR_INTR_TIMER; |
| } |
| |
| |
| /*============================================================================ |
| * spur_intr: Spurious interrupt handler. |
| * |
| * Description: |
| * We don't know this interrupt. |
| * Print a warning. |
| */ |
| |
| static void spur_intr (sdla_t* card) |
| { |
| if (net_ratelimit()){ |
| printk(KERN_INFO "%s: spurious interrupt!\n", card->devname); |
| } |
| } |
| |
| |
| //FIXME: Fix the IPX in next version |
| /*=========================================================================== |
| * Return 0 for non-IPXWAN packet |
| * 1 for IPXWAN packet or IPX is not enabled! |
| * FIXME: Use a IPX structure here not offsets |
| */ |
| static int handle_IPXWAN(unsigned char *sendpacket, |
| char *devname, unsigned char enable_IPX, |
| unsigned long network_number) |
| { |
| int i; |
| |
| if( sendpacket[1] == 0x00 && sendpacket[2] == 0x80 && |
| sendpacket[6] == 0x81 && sendpacket[7] == 0x37) { |
| |
| /* It's an IPX packet */ |
| if (!enable_IPX){ |
| /* Return 1 so we don't pass it up the stack. */ |
| //FIXME: Take this out when IPX is fixed |
| if (net_ratelimit()){ |
| printk (KERN_INFO |
| "%s: WARNING: Unsupported IPX packet received and dropped\n", |
| devname); |
| } |
| return 1; |
| } |
| } else { |
| /* It's not IPX so return and pass it up the stack. */ |
| return 0; |
| } |
| |
| if( sendpacket[24] == 0x90 && sendpacket[25] == 0x04){ |
| /* It's IPXWAN */ |
| |
| if( sendpacket[10] == 0x02 && sendpacket[42] == 0x00){ |
| |
| /* It's a timer request packet */ |
| printk(KERN_INFO "%s: Received IPXWAN Timer Request packet\n", |
| devname); |
| |
| /* Go through the routing options and answer no to every |
| * option except Unnumbered RIP/SAP |
| */ |
| for(i = 49; sendpacket[i] == 0x00; i += 5){ |
| /* 0x02 is the option for Unnumbered RIP/SAP */ |
| if( sendpacket[i + 4] != 0x02){ |
| sendpacket[i + 1] = 0; |
| } |
| } |
| |
| /* Skip over the extended Node ID option */ |
| if( sendpacket[i] == 0x04 ){ |
| i += 8; |
| } |
| |
| /* We also want to turn off all header compression opt. |
| */ |
| for(; sendpacket[i] == 0x80 ;){ |
| sendpacket[i + 1] = 0; |
| i += (sendpacket[i + 2] << 8) + (sendpacket[i + 3]) + 4; |
| } |
| |
| /* Set the packet type to timer response */ |
| sendpacket[42] = 0x01; |
| |
| printk(KERN_INFO "%s: Sending IPXWAN Timer Response\n", |
| devname); |
| |
| } else if( sendpacket[42] == 0x02 ){ |
| |
| /* This is an information request packet */ |
| printk(KERN_INFO |
| "%s: Received IPXWAN Information Request packet\n", |
| devname); |
| |
| /* Set the packet type to information response */ |
| sendpacket[42] = 0x03; |
| |
| /* Set the router name */ |
| sendpacket[59] = 'F'; |
| sendpacket[60] = 'P'; |
| sendpacket[61] = 'I'; |
| sendpacket[62] = 'P'; |
| sendpacket[63] = 'E'; |
| sendpacket[64] = '-'; |
| sendpacket[65] = CVHexToAscii(network_number >> 28); |
| sendpacket[66] = CVHexToAscii((network_number & 0x0F000000)>> 24); |
| sendpacket[67] = CVHexToAscii((network_number & 0x00F00000)>> 20); |
| sendpacket[68] = CVHexToAscii((network_number & 0x000F0000)>> 16); |
| sendpacket[69] = CVHexToAscii((network_number & 0x0000F000)>> 12); |
| sendpacket[70] = CVHexToAscii((network_number & 0x00000F00)>> 8); |
| sendpacket[71] = CVHexToAscii((network_number & 0x000000F0)>> 4); |
| sendpacket[72] = CVHexToAscii(network_number & 0x0000000F); |
| for(i = 73; i < 107; i+= 1) |
| { |
| sendpacket[i] = 0; |
| } |
| |
| printk(KERN_INFO "%s: Sending IPXWAN Information Response packet\n", |
| devname); |
| } else { |
| |
| printk(KERN_INFO "%s: Unknown IPXWAN packet!\n",devname); |
| return 0; |
| } |
| |
| /* Set the WNodeID to our network address */ |
| sendpacket[43] = (unsigned char)(network_number >> 24); |
| sendpacket[44] = (unsigned char)((network_number & 0x00FF0000) >> 16); |
| sendpacket[45] = (unsigned char)((network_number & 0x0000FF00) >> 8); |
| sendpacket[46] = (unsigned char)(network_number & 0x000000FF); |
| |
| return 1; |
| } |
| |
| /* If we get here, it's an IPX-data packet so it'll get passed up the |
| * stack. |
| * switch the network numbers |
| */ |
| switch_net_numbers(sendpacket, network_number ,1); |
| return 0; |
| } |
| /*============================================================================ |
| * process_route |
| * |
| * Rationale: |
| * If the interface goes down, or we receive an ARP request, |
| * we have to change the network interface ip addresses. |
| * This cannot be done within the interrupt. |
| * |
| * Description: |
| * |
| * This routine is called as a polling routine to dynamically |
| * add/delete routes negotiated by inverse ARP. It is in this |
| * "task" because we don't want routes to be added while in |
| * interrupt context. |
| * |
| * Usage: |
| * This function is called by fr_poll() polling funtion. |
| */ |
| |
| static void process_route(struct net_device *dev) |
| { |
| fr_channel_t *chan = dev->priv; |
| sdla_t *card = chan->card; |
| |
| struct ifreq if_info; |
| struct sockaddr_in *if_data; |
| mm_segment_t fs = get_fs(); |
| u32 ip_tmp; |
| int err; |
| |
| |
| switch(chan->route_flag){ |
| |
| case ADD_ROUTE: |
| |
| /* Set remote addresses */ |
| memset(&if_info, 0, sizeof(if_info)); |
| strcpy(if_info.ifr_name, dev->name); |
| |
| set_fs(get_ds()); /* get user space block */ |
| |
| if_data = (struct sockaddr_in *)&if_info.ifr_dstaddr; |
| if_data->sin_addr.s_addr = chan->ip_remote; |
| if_data->sin_family = AF_INET; |
| err = devinet_ioctl( SIOCSIFDSTADDR, &if_info ); |
| |
| set_fs(fs); /* restore old block */ |
| |
| if (err) { |
| printk(KERN_INFO |
| "%s: Route Add failed. Error: %d\n", |
| card->devname,err); |
| printk(KERN_INFO "%s: Address: %u.%u.%u.%u\n", |
| chan->name, NIPQUAD(chan->ip_remote)); |
| |
| }else { |
| printk(KERN_INFO "%s: Route Added Successfully: %u.%u.%u.%u\n", |
| card->devname,NIPQUAD(chan->ip_remote)); |
| chan->route_flag = ROUTE_ADDED; |
| } |
| break; |
| |
| case REMOVE_ROUTE: |
| |
| /* Set remote addresses */ |
| memset(&if_info, 0, sizeof(if_info)); |
| strcpy(if_info.ifr_name, dev->name); |
| |
| ip_tmp = get_ip_address(dev,WAN_POINTOPOINT_IP); |
| |
| set_fs(get_ds()); /* get user space block */ |
| |
| if_data = (struct sockaddr_in *)&if_info.ifr_dstaddr; |
| if_data->sin_addr.s_addr = 0; |
| if_data->sin_family = AF_INET; |
| err = devinet_ioctl( SIOCSIFDSTADDR, &if_info ); |
| |
| set_fs(fs); |
| |
| if (err) { |
| printk(KERN_INFO |
| "%s: Deleting of route failed. Error: %d\n", |
| card->devname,err); |
| printk(KERN_INFO "%s: Address: %u.%u.%u.%u\n", |
| dev->name,NIPQUAD(chan->ip_remote) ); |
| |
| } else { |
| printk(KERN_INFO "%s: Route Removed Sucessfuly: %u.%u.%u.%u\n", |
| card->devname,NIPQUAD(ip_tmp)); |
| chan->route_flag = NO_ROUTE; |
| } |
| break; |
| |
| } /* Case Statement */ |
| |
| } |
| |
| |
| |
| /****** Frame Relay Firmware-Specific Functions *****************************/ |
| |
| /*============================================================================ |
| * Read firmware code version. |
| * o fill string str with firmware version info. |
| */ |
| static int fr_read_version (sdla_t* card, char* str) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| mbox->cmd.command = FR_READ_CODE_VERSION; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| if (!err && str) { |
| int len = mbox->cmd.length; |
| memcpy(str, mbox->data, len); |
| str[len] = '\0'; |
| } |
| return err; |
| } |
| |
| /*============================================================================ |
| * Set global configuration. |
| */ |
| static int fr_configure (sdla_t* card, fr_conf_t *conf) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int dlci_num = card->u.f.dlci_num; |
| int err, i; |
| |
| do |
| { |
| memcpy(mbox->data, conf, sizeof(fr_conf_t)); |
| |
| if (dlci_num) for (i = 0; i < dlci_num; ++i) |
| ((fr_conf_t*)mbox->data)->dlci[i] = |
| card->u.f.node_dlci[i]; |
| |
| mbox->cmd.command = FR_SET_CONFIG; |
| mbox->cmd.length = |
| sizeof(fr_conf_t) + dlci_num * sizeof(short); |
| |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| /*NC Oct 12 2000 */ |
| if (err != CMD_OK){ |
| printk(KERN_ERR "%s: Frame Relay Configuration Failed: rc=0x%x\n", |
| card->devname,err); |
| } |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Set DLCI configuration. |
| */ |
| static int fr_dlci_configure (sdla_t* card, fr_dlc_conf_t *conf, unsigned dlci) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memcpy(mbox->data, conf, sizeof(fr_dlc_conf_t)); |
| mbox->cmd.dlci = (unsigned short) dlci; |
| mbox->cmd.command = FR_SET_CONFIG; |
| mbox->cmd.length = sizeof(fr_dlc_conf_t); |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry--); |
| |
| return err; |
| } |
| /*============================================================================ |
| * Set interrupt mode. |
| */ |
| static int fr_set_intr_mode (sdla_t* card, unsigned mode, unsigned mtu, |
| unsigned short timeout) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| fr508_intr_ctl_t* ictl = (void*)mbox->data; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| memset(ictl, 0, sizeof(fr508_intr_ctl_t)); |
| ictl->mode = mode; |
| ictl->tx_len = mtu; |
| ictl->irq = card->hw.irq; |
| |
| /* indicate timeout on timer */ |
| if (mode & 0x20) ictl->timeout = timeout; |
| |
| mbox->cmd.length = sizeof(fr508_intr_ctl_t); |
| mbox->cmd.command = FR_SET_INTR_MODE; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Enable communications. |
| */ |
| static int fr_comm_enable (sdla_t* card) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| mbox->cmd.command = FR_COMM_ENABLE; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * fr_comm_disable |
| * |
| * Warning: This functin is called by the shutdown() procedure. It is void |
| * since dev->priv are has already been deallocated and no |
| * error checking is possible using fr_event() function. |
| */ |
| static void fr_comm_disable (sdla_t* card) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do { |
| mbox->cmd.command = FR_SET_MODEM_STATUS; |
| mbox->cmd.length = 1; |
| mbox->data[0] = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry--); |
| |
| retry = MAX_CMD_RETRY; |
| |
| do |
| { |
| mbox->cmd.command = FR_COMM_DISABLE; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry--); |
| |
| return; |
| } |
| |
| |
| |
| /*============================================================================ |
| * Get communications error statistics. |
| */ |
| static int fr_get_err_stats (sdla_t* card) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| |
| do |
| { |
| mbox->cmd.command = FR_READ_ERROR_STATS; |
| mbox->cmd.length = 0; |
| mbox->cmd.dlci = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| if (!err) { |
| fr_comm_stat_t* stats = (void*)mbox->data; |
| card->wandev.stats.rx_over_errors = stats->rx_overruns; |
| card->wandev.stats.rx_crc_errors = stats->rx_bad_crc; |
| card->wandev.stats.rx_missed_errors = stats->rx_aborts; |
| card->wandev.stats.rx_length_errors = stats->rx_too_long; |
| card->wandev.stats.tx_aborted_errors = stats->tx_aborts; |
| |
| } |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Get statistics. |
| */ |
| static int fr_get_stats (sdla_t* card) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| |
| do |
| { |
| mbox->cmd.command = FR_READ_STATISTICS; |
| mbox->cmd.length = 0; |
| mbox->cmd.dlci = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| if (!err) { |
| fr_link_stat_t* stats = (void*)mbox->data; |
| card->wandev.stats.rx_frame_errors = stats->rx_bad_format; |
| card->wandev.stats.rx_dropped = |
| stats->rx_dropped + stats->rx_dropped2; |
| } |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Add DLCI(s) (Access Node only!). |
| * This routine will perform the ADD_DLCIs command for the specified DLCI. |
| */ |
| static int fr_add_dlci (sdla_t* card, int dlci) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| unsigned short* dlci_list = (void*)mbox->data; |
| |
| mbox->cmd.length = sizeof(short); |
| dlci_list[0] = dlci; |
| mbox->cmd.command = FR_ADD_DLCI; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Activate DLCI(s) (Access Node only!). |
| * This routine will perform the ACTIVATE_DLCIs command with a DLCI number. |
| */ |
| static int fr_activate_dlci (sdla_t* card, int dlci) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| unsigned short* dlci_list = (void*)mbox->data; |
| |
| mbox->cmd.length = sizeof(short); |
| dlci_list[0] = dlci; |
| mbox->cmd.command = FR_ACTIVATE_DLCI; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Delete DLCI(s) (Access Node only!). |
| * This routine will perform the DELETE_DLCIs command with a DLCI number. |
| */ |
| static int fr_delete_dlci (sdla_t* card, int dlci) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| unsigned short* dlci_list = (void*)mbox->data; |
| |
| mbox->cmd.length = sizeof(short); |
| dlci_list[0] = dlci; |
| mbox->cmd.command = FR_DELETE_DLCI; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| return err; |
| } |
| |
| |
| |
| /*============================================================================ |
| * Issue in-channel signalling frame. |
| */ |
| static int fr_issue_isf (sdla_t* card, int isf) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| mbox->data[0] = isf; |
| mbox->cmd.length = 1; |
| mbox->cmd.command = FR_ISSUE_IS_FRAME; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| return err; |
| } |
| |
| |
| static unsigned int fr_send_hdr (sdla_t*card, int dlci, unsigned int offset) |
| { |
| struct net_device *dev = find_channel(card,dlci); |
| fr_channel_t *chan; |
| |
| if (!dev || !(chan=dev->priv)) |
| return offset; |
| |
| if (chan->fr_header_len){ |
| sdla_poke(&card->hw, offset, chan->fr_header, chan->fr_header_len); |
| } |
| |
| return offset+chan->fr_header_len; |
| } |
| |
| /*============================================================================ |
| * Send a frame on a selected DLCI. |
| */ |
| static int fr_send_data_header (sdla_t* card, int dlci, unsigned char attr, int len, |
| void *buf, unsigned char hdr_len) |
| { |
| fr_mbox_t* mbox = card->mbox + 0x800; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| mbox->cmd.dlci = dlci; |
| mbox->cmd.attr = attr; |
| mbox->cmd.length = len+hdr_len; |
| mbox->cmd.command = FR_WRITE; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| if (!err) { |
| fr_tx_buf_ctl_t* frbuf; |
| |
| if(card->hw.type == SDLA_S514) |
| frbuf = (void*)(*(unsigned long*)mbox->data + |
| card->hw.dpmbase); |
| else |
| frbuf = (void*)(*(unsigned long*)mbox->data - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| |
| sdla_poke(&card->hw, fr_send_hdr(card,dlci,frbuf->offset), buf, len); |
| frbuf->flag = 0x01; |
| } |
| |
| return err; |
| } |
| |
| static int fr_send (sdla_t* card, int dlci, unsigned char attr, int len, |
| void *buf) |
| { |
| fr_mbox_t* mbox = card->mbox + 0x800; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| mbox->cmd.dlci = dlci; |
| mbox->cmd.attr = attr; |
| mbox->cmd.length = len; |
| mbox->cmd.command = FR_WRITE; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| if (!err) { |
| fr_tx_buf_ctl_t* frbuf; |
| |
| if(card->hw.type == SDLA_S514) |
| frbuf = (void*)(*(unsigned long*)mbox->data + |
| card->hw.dpmbase); |
| else |
| frbuf = (void*)(*(unsigned long*)mbox->data - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| |
| sdla_poke(&card->hw, frbuf->offset, buf, len); |
| frbuf->flag = 0x01; |
| } |
| |
| return err; |
| } |
| |
| |
| /****** Firmware Asynchronous Event Handlers ********************************/ |
| |
| /*============================================================================ |
| * Main asyncronous event/error handler. |
| * This routine is called whenever firmware command returns non-zero |
| * return code. |
| * |
| * Return zero if previous command has to be cancelled. |
| */ |
| static int fr_event (sdla_t *card, int event, fr_mbox_t* mbox) |
| { |
| fr508_flags_t* flags = card->flags; |
| char *ptr = &flags->iflag; |
| int i; |
| |
| switch (event) { |
| |
| case FRRES_MODEM_FAILURE: |
| return fr_modem_failure(card, mbox); |
| |
| case FRRES_CHANNEL_DOWN: { |
| struct net_device *dev; |
| |
| /* Remove all routes from associated DLCI's */ |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)) { |
| fr_channel_t *chan = dev->priv; |
| if (chan->route_flag == ROUTE_ADDED) { |
| chan->route_flag = REMOVE_ROUTE; |
| } |
| |
| if (chan->inarp == INARP_CONFIGURED) { |
| chan->inarp = INARP_REQUEST; |
| } |
| |
| /* If the link becomes disconnected then, |
| * all channels will be disconnected |
| * as well. |
| */ |
| set_chan_state(dev,WAN_DISCONNECTED); |
| } |
| |
| wanpipe_set_state(card, WAN_DISCONNECTED); |
| return 1; |
| } |
| |
| case FRRES_CHANNEL_UP: { |
| struct net_device *dev; |
| |
| /* FIXME: Only startup devices that are on the list */ |
| |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)) { |
| |
| set_chan_state(dev,WAN_CONNECTED); |
| } |
| |
| wanpipe_set_state(card, WAN_CONNECTED); |
| return 1; |
| } |
| |
| case FRRES_DLCI_CHANGE: |
| return fr_dlci_change(card, mbox); |
| |
| case FRRES_DLCI_MISMATCH: |
| printk(KERN_INFO "%s: DLCI list mismatch!\n", |
| card->devname); |
| return 1; |
| |
| case CMD_TIMEOUT: |
| printk(KERN_ERR "%s: command 0x%02X timed out!\n", |
| card->devname, mbox->cmd.command); |
| printk(KERN_INFO "%s: ID Bytes = ",card->devname); |
| for(i = 0; i < 8; i ++) |
| printk(KERN_INFO "0x%02X ", *(ptr + 0x18 + i)); |
| printk(KERN_INFO "\n"); |
| |
| break; |
| |
| case FRRES_DLCI_INACTIVE: |
| break; |
| |
| case FRRES_CIR_OVERFLOW: |
| break; |
| |
| case FRRES_BUFFER_OVERFLOW: |
| break; |
| |
| default: |
| printk(KERN_INFO "%s: command 0x%02X returned 0x%02X!\n" |
| , card->devname, mbox->cmd.command, event); |
| } |
| |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Handle modem error. |
| * |
| * Return zero if previous command has to be cancelled. |
| */ |
| static int fr_modem_failure (sdla_t *card, fr_mbox_t* mbox) |
| { |
| printk(KERN_INFO "%s: physical link down! (modem error 0x%02X)\n", |
| card->devname, mbox->data[0]); |
| |
| switch (mbox->cmd.command){ |
| case FR_WRITE: |
| |
| case FR_READ: |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /*============================================================================ |
| * Handle DLCI status change. |
| * |
| * Return zero if previous command has to be cancelled. |
| */ |
| static int fr_dlci_change (sdla_t *card, fr_mbox_t* mbox) |
| { |
| dlci_status_t* status = (void*)mbox->data; |
| int cnt = mbox->cmd.length / sizeof(dlci_status_t); |
| fr_channel_t *chan; |
| struct net_device* dev2; |
| |
| |
| for (; cnt; --cnt, ++status) { |
| |
| unsigned short dlci= status->dlci; |
| struct net_device* dev = find_channel(card, dlci); |
| |
| if (dev == NULL){ |
| printk(KERN_INFO |
| "%s: CPE contains unconfigured DLCI= %d\n", |
| card->devname, dlci); |
| |
| printk(KERN_INFO |
| "%s: unconfigured DLCI %d reported by network\n" |
| , card->devname, dlci); |
| |
| }else{ |
| if (status->state == FR_LINK_INOPER) { |
| printk(KERN_INFO |
| "%s: DLCI %u is inactive!\n", |
| card->devname, dlci); |
| |
| if (dev && netif_running(dev)) |
| set_chan_state(dev, WAN_DISCONNECTED); |
| } |
| |
| if (status->state & FR_DLCI_DELETED) { |
| |
| printk(KERN_INFO |
| "%s: DLCI %u has been deleted!\n", |
| card->devname, dlci); |
| |
| if (dev && netif_running(dev)){ |
| |
| fr_channel_t *chan = dev->priv; |
| |
| if (chan->route_flag == ROUTE_ADDED) { |
| chan->route_flag = REMOVE_ROUTE; |
| /* The state change will trigger |
| * the fr polling routine */ |
| } |
| |
| if (chan->inarp == INARP_CONFIGURED) { |
| chan->inarp = INARP_REQUEST; |
| } |
| |
| set_chan_state(dev, WAN_DISCONNECTED); |
| } |
| |
| } else if (status->state & FR_DLCI_ACTIVE) { |
| |
| chan = dev->priv; |
| |
| /* This flag is used for configuring specific |
| DLCI(s) when they become active. |
| */ |
| chan->dlci_configured = DLCI_CONFIG_PENDING; |
| |
| set_chan_state(dev, WAN_CONNECTED); |
| |
| } |
| } |
| } |
| |
| for (dev2 = card->wandev.dev; dev2; |
| dev2 = *((struct net_device **)dev2->priv)){ |
| |
| chan = dev2->priv; |
| |
| if (chan->dlci_configured == DLCI_CONFIG_PENDING) { |
| if (fr_init_dlci(card, chan)){ |
| return 1; |
| } |
| } |
| |
| } |
| return 1; |
| } |
| |
| |
| static int fr_init_dlci (sdla_t *card, fr_channel_t *chan) |
| { |
| fr_dlc_conf_t cfg; |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| |
| if ( chan->cir_status == CIR_DISABLED) { |
| |
| cfg.cir_fwd = cfg.cir_bwd = 16; |
| cfg.bc_fwd = cfg.bc_bwd = 16; |
| cfg.conf_flags = 0x0001; |
| |
| }else if (chan->cir_status == CIR_ENABLED) { |
| |
| cfg.cir_fwd = cfg.cir_bwd = chan->cir; |
| cfg.bc_fwd = cfg.bc_bwd = chan->bc; |
| cfg.be_fwd = cfg.be_bwd = chan->be; |
| cfg.conf_flags = 0x0000; |
| } |
| |
| if (fr_dlci_configure( card, &cfg , chan->dlci)){ |
| printk(KERN_INFO |
| "%s: DLCI Configure failed for %d\n", |
| card->devname, chan->dlci); |
| return 1; |
| } |
| |
| chan->dlci_configured = DLCI_CONFIGURED; |
| |
| /* Read the interface byte mapping into the channel |
| * structure. |
| */ |
| read_DLCI_IB_mapping( card, chan ); |
| |
| return 0; |
| } |
| /******* Miscellaneous ******************************************************/ |
| |
| /*============================================================================ |
| * Update channel state. |
| */ |
| static int update_chan_state(struct net_device* dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| int err; |
| |
| do |
| { |
| mbox->cmd.command = FR_LIST_ACTIVE_DLCI; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| if (!err) { |
| |
| unsigned short* list = (void*)mbox->data; |
| int cnt = mbox->cmd.length / sizeof(short); |
| |
| err=1; |
| |
| for (; cnt; --cnt, ++list) { |
| |
| if (*list == chan->dlci) { |
| set_chan_state(dev, WAN_CONNECTED); |
| |
| |
| /* May 23 2000. NC |
| * When a dlci is added or restarted, |
| * the dlci_int_interface pointer must |
| * be reinitialized. */ |
| if (!chan->dlci_int_interface){ |
| err=fr_init_dlci (card,chan); |
| } |
| break; |
| } |
| } |
| } |
| |
| return err; |
| } |
| |
| /*============================================================================ |
| * Set channel state. |
| */ |
| static void set_chan_state(struct net_device* dev, int state) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t* card = chan->card; |
| |
| if (chan->common.state != state) { |
| |
| switch (state) { |
| |
| case WAN_CONNECTED: |
| printk(KERN_INFO |
| "%s: Interface %s: DLCI %d connected\n", |
| card->devname, dev->name, chan->dlci); |
| |
| /* If the interface was previoulsy down, |
| * bring it up, since the channel is active */ |
| |
| trigger_fr_poll (dev); |
| trigger_fr_arp (dev); |
| break; |
| |
| case WAN_CONNECTING: |
| printk(KERN_INFO |
| "%s: Interface %s: DLCI %d connecting\n", |
| card->devname, dev->name, chan->dlci); |
| break; |
| |
| case WAN_DISCONNECTED: |
| printk (KERN_INFO |
| "%s: Interface %s: DLCI %d disconnected!\n", |
| card->devname, dev->name, chan->dlci); |
| |
| /* If the interface is up, bring it down, |
| * since the channel is now disconnected */ |
| trigger_fr_poll (dev); |
| break; |
| } |
| |
| chan->common.state = state; |
| } |
| |
| chan->state_tick = jiffies; |
| } |
| |
| /*============================================================================ |
| * Find network device by its channel number. |
| * |
| * We need this critical flag because we change |
| * the dlci_to_dev_map outside the interrupt. |
| * |
| * NOTE: del_if() functions updates this array, it uses |
| * the spin locks to avoid corruption. |
| */ |
| static struct net_device* find_channel(sdla_t* card, unsigned dlci) |
| { |
| if(dlci > HIGHEST_VALID_DLCI) |
| return NULL; |
| |
| return(card->u.f.dlci_to_dev_map[dlci]); |
| } |
| |
| /*============================================================================ |
| * Check to see if a frame can be sent. If no transmit buffers available, |
| * enable transmit interrupts. |
| * |
| * Return: 1 - Tx buffer(s) available |
| * 0 - no buffers available |
| */ |
| static int is_tx_ready (sdla_t* card, fr_channel_t* chan) |
| { |
| unsigned char sb; |
| |
| if(card->hw.type == SDLA_S514) |
| return 1; |
| |
| sb = inb(card->hw.port); |
| if (sb & 0x02) |
| return 1; |
| |
| return 0; |
| } |
| |
| /*============================================================================ |
| * Convert decimal string to unsigned integer. |
| * If len != 0 then only 'len' characters of the string are converted. |
| */ |
| static unsigned int dec_to_uint (unsigned char* str, int len) |
| { |
| unsigned val; |
| |
| if (!len) |
| len = strlen(str); |
| |
| for (val = 0; len && is_digit(*str); ++str, --len) |
| val = (val * 10) + (*str - (unsigned)'0'); |
| |
| return val; |
| } |
| |
| |
| |
| /*============================================================================= |
| * Store a UDP management packet for later processing. |
| */ |
| |
| static int store_udp_mgmt_pkt(int udp_type, char udp_pkt_src, sdla_t* card, |
| struct sk_buff *skb, int dlci) |
| { |
| int udp_pkt_stored = 0; |
| |
| struct net_device *dev = find_channel(card, dlci); |
| fr_channel_t *chan; |
| |
| if (!dev || !(chan=dev->priv)) |
| return 1; |
| |
| if(!card->u.f.udp_pkt_lgth && (skb->len <= MAX_LGTH_UDP_MGNT_PKT)){ |
| card->u.f.udp_pkt_lgth = skb->len + chan->fr_header_len; |
| card->u.f.udp_type = udp_type; |
| card->u.f.udp_pkt_src = udp_pkt_src; |
| card->u.f.udp_dlci = dlci; |
| memcpy(card->u.f.udp_pkt_data, skb->data, skb->len); |
| card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UDP; |
| udp_pkt_stored = 1; |
| |
| }else{ |
| printk(KERN_INFO "ERROR: UDP packet not stored for DLCI %d\n", |
| dlci); |
| } |
| |
| if(udp_pkt_src == UDP_PKT_FRM_STACK){ |
| dev_kfree_skb_any(skb); |
| }else{ |
| dev_kfree_skb_any(skb); |
| } |
| |
| return(udp_pkt_stored); |
| } |
| |
| |
| /*============================================================================== |
| * Process UDP call of type FPIPE8ND |
| */ |
| static int process_udp_mgmt_pkt(sdla_t* card) |
| { |
| |
| int c_retry = MAX_CMD_RETRY; |
| unsigned char *buf; |
| unsigned char frames; |
| unsigned int len; |
| unsigned short buffer_length; |
| struct sk_buff *new_skb; |
| fr_mbox_t* mbox = card->mbox; |
| int err; |
| struct timeval tv; |
| int udp_mgmt_req_valid = 1; |
| struct net_device* dev; |
| fr_channel_t* chan; |
| fr_udp_pkt_t *fr_udp_pkt; |
| unsigned short num_trc_els; |
| fr_trc_el_t* ptr_trc_el; |
| fr_trc_el_t trc_el; |
| fpipemon_trc_t* fpipemon_trc; |
| |
| char udp_pkt_src = card->u.f.udp_pkt_src; |
| int dlci = card->u.f.udp_dlci; |
| |
| /* Find network interface for this packet */ |
| dev = find_channel(card, dlci); |
| if (!dev){ |
| card->u.f.udp_pkt_lgth = 0; |
| return 1; |
| } |
| if ((chan = dev->priv) == NULL){ |
| card->u.f.udp_pkt_lgth = 0; |
| return 1; |
| } |
| |
| /* If the UDP packet is from the network, we are going to have to |
| transmit a response. Before doing so, we must check to see that |
| we are not currently transmitting a frame (in 'if_send()') and |
| that we are not already in a 'delayed transmit' state. |
| */ |
| if(udp_pkt_src == UDP_PKT_FRM_NETWORK) { |
| if (check_tx_status(card,dev)){ |
| card->u.f.udp_pkt_lgth = 0; |
| return 1; |
| } |
| } |
| |
| fr_udp_pkt = (fr_udp_pkt_t *)card->u.f.udp_pkt_data; |
| |
| if(udp_pkt_src == UDP_PKT_FRM_NETWORK) { |
| |
| switch(fr_udp_pkt->cblock.command) { |
| |
| case FR_READ_MODEM_STATUS: |
| case FR_READ_STATUS: |
| case FPIPE_ROUTER_UP_TIME: |
| case FR_READ_ERROR_STATS: |
| case FPIPE_DRIVER_STAT_GEN: |
| case FR_READ_STATISTICS: |
| case FR_READ_ADD_DLC_STATS: |
| case FR_READ_CONFIG: |
| case FR_READ_CODE_VERSION: |
| udp_mgmt_req_valid = 1; |
| break; |
| default: |
| udp_mgmt_req_valid = 0; |
| break; |
| } |
| } |
| |
| if(!udp_mgmt_req_valid) { |
| /* set length to 0 */ |
| fr_udp_pkt->cblock.length = 0; |
| /* set return code */ |
| fr_udp_pkt->cblock.result = 0xCD; |
| |
| chan->drvstats_gen.UDP_PIPE_mgmt_direction_err ++; |
| |
| if (net_ratelimit()){ |
| printk(KERN_INFO |
| "%s: Warning, Illegal UDP command attempted from network: %x\n", |
| card->devname,fr_udp_pkt->cblock.command); |
| } |
| |
| } else { |
| |
| switch(fr_udp_pkt->cblock.command) { |
| |
| case FPIPE_ENABLE_TRACING: |
| if(!card->TracingEnabled) { |
| do { |
| mbox->cmd.command = FR_SET_TRACE_CONFIG; |
| mbox->cmd.length = 1; |
| mbox->cmd.dlci = 0x00; |
| mbox->data[0] = fr_udp_pkt->data[0] | |
| RESET_TRC; |
| err = sdla_exec(mbox) ? |
| mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && c_retry-- && fr_event(card, err, |
| mbox)); |
| |
| if(err) { |
| card->TracingEnabled = 0; |
| /* set the return code */ |
| fr_udp_pkt->cblock.result = |
| mbox->cmd.result; |
| mbox->cmd.length = 0; |
| break; |
| } |
| |
| sdla_peek(&card->hw, NO_TRC_ELEMENTS_OFF, |
| &num_trc_els, 2); |
| sdla_peek(&card->hw, BASE_TRC_ELEMENTS_OFF, |
| &card->u.f.trc_el_base, 4); |
| card->u.f.curr_trc_el = card->u.f.trc_el_base; |
| card->u.f.trc_el_last = card->u.f.curr_trc_el + |
| ((num_trc_els - 1) * |
| sizeof(fr_trc_el_t)); |
| |
| /* Calculate the maximum trace data area in */ |
| /* the UDP packet */ |
| card->u.f.trc_bfr_space=(MAX_LGTH_UDP_MGNT_PKT - |
| //sizeof(fr_encap_hdr_t) - |
| sizeof(ip_pkt_t) - |
| sizeof(udp_pkt_t) - |
| sizeof(wp_mgmt_t) - |
| sizeof(cblock_t)); |
| |
| /* set return code */ |
| fr_udp_pkt->cblock.result = 0; |
| |
| } else { |
| /* set return code to line trace already |
| enabled */ |
| fr_udp_pkt->cblock.result = 1; |
| } |
| |
| mbox->cmd.length = 0; |
| card->TracingEnabled = 1; |
| break; |
| |
| |
| case FPIPE_DISABLE_TRACING: |
| if(card->TracingEnabled) { |
| |
| do { |
| mbox->cmd.command = FR_SET_TRACE_CONFIG; |
| mbox->cmd.length = 1; |
| mbox->cmd.dlci = 0x00; |
| mbox->data[0] = ~ACTIVATE_TRC; |
| err = sdla_exec(mbox) ? |
| mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && c_retry-- && fr_event(card, err, mbox)); |
| } |
| |
| /* set return code */ |
| fr_udp_pkt->cblock.result = 0; |
| mbox->cmd.length = 0; |
| card->TracingEnabled = 0; |
| break; |
| |
| case FPIPE_GET_TRACE_INFO: |
| |
| /* Line trace cannot be performed on the 502 */ |
| if(!card->TracingEnabled) { |
| /* set return code */ |
| fr_udp_pkt->cblock.result = 1; |
| mbox->cmd.length = 0; |
| break; |
| } |
| |
| ptr_trc_el = (void *)card->u.f.curr_trc_el; |
| |
| buffer_length = 0; |
| fr_udp_pkt->data[0x00] = 0x00; |
| |
| for(frames = 0; frames < MAX_FRMS_TRACED; frames ++) { |
| |
| sdla_peek(&card->hw, (unsigned long)ptr_trc_el, |
| (void *)&trc_el.flag, |
| sizeof(fr_trc_el_t)); |
| if(trc_el.flag == 0x00) { |
| break; |
| } |
| if((card->u.f.trc_bfr_space - buffer_length) |
| < sizeof(fpipemon_trc_hdr_t)) { |
| fr_udp_pkt->data[0x00] |= MORE_TRC_DATA; |
| break; |
| } |
| |
| fpipemon_trc = |
| (fpipemon_trc_t *)&fr_udp_pkt->data[buffer_length]; |
| fpipemon_trc->fpipemon_trc_hdr.status = |
| trc_el.attr; |
| fpipemon_trc->fpipemon_trc_hdr.tmstamp = |
| trc_el.tmstamp; |
| fpipemon_trc->fpipemon_trc_hdr.length = |
| trc_el.length; |
| |
| if(!trc_el.offset || !trc_el.length) { |
| |
| fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x00; |
| |
| }else if((trc_el.length + sizeof(fpipemon_trc_hdr_t) + 1) > |
| (card->u.f.trc_bfr_space - buffer_length)){ |
| |
| fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x00; |
| fr_udp_pkt->data[0x00] |= MORE_TRC_DATA; |
| |
| }else { |
| fpipemon_trc->fpipemon_trc_hdr.data_passed = 0x01; |
| sdla_peek(&card->hw, trc_el.offset, |
| fpipemon_trc->data, |
| trc_el.length); |
| } |
| |
| trc_el.flag = 0x00; |
| sdla_poke(&card->hw, (unsigned long)ptr_trc_el, |
| &trc_el.flag, 1); |
| |
| ptr_trc_el ++; |
| if((void *)ptr_trc_el > card->u.f.trc_el_last) |
| ptr_trc_el = (void*)card->u.f.trc_el_base; |
| |
| buffer_length += sizeof(fpipemon_trc_hdr_t); |
| if(fpipemon_trc->fpipemon_trc_hdr.data_passed) { |
| buffer_length += trc_el.length; |
| } |
| |
| if(fr_udp_pkt->data[0x00] & MORE_TRC_DATA) { |
| break; |
| } |
| } |
| |
| if(frames == MAX_FRMS_TRACED) { |
| fr_udp_pkt->data[0x00] |= MORE_TRC_DATA; |
| } |
| |
| card->u.f.curr_trc_el = (void *)ptr_trc_el; |
| |
| /* set the total number of frames passed */ |
| fr_udp_pkt->data[0x00] |= |
| ((frames << 1) & (MAX_FRMS_TRACED << 1)); |
| |
| /* set the data length and return code */ |
| fr_udp_pkt->cblock.length = mbox->cmd.length = buffer_length; |
| fr_udp_pkt->cblock.result = 0; |
| break; |
| |
| case FPIPE_FT1_READ_STATUS: |
| sdla_peek(&card->hw, 0xF020, |
| &fr_udp_pkt->data[0x00] , 2); |
| fr_udp_pkt->cblock.length = mbox->cmd.length = 2; |
| fr_udp_pkt->cblock.result = 0; |
| break; |
| |
| case FPIPE_FLUSH_DRIVER_STATS: |
| init_chan_statistics(chan); |
| init_global_statistics(card); |
| mbox->cmd.length = 0; |
| break; |
| |
| case FPIPE_ROUTER_UP_TIME: |
| do_gettimeofday(&tv); |
| chan->router_up_time = tv.tv_sec - |
| chan->router_start_time; |
| *(unsigned long *)&fr_udp_pkt->data = |
| chan->router_up_time; |
| mbox->cmd.length = fr_udp_pkt->cblock.length = 4; |
| fr_udp_pkt->cblock.result = 0; |
| break; |
| |
| case FPIPE_DRIVER_STAT_IFSEND: |
| memcpy(fr_udp_pkt->data, |
| &chan->drvstats_if_send.if_send_entry, |
| sizeof(if_send_stat_t)); |
| mbox->cmd.length = fr_udp_pkt->cblock.length =sizeof(if_send_stat_t); |
| fr_udp_pkt->cblock.result = 0; |
| break; |
| |
| case FPIPE_DRIVER_STAT_INTR: |
| |
| memcpy(fr_udp_pkt->data, |
| &card->statistics.isr_entry, |
| sizeof(global_stats_t)); |
| |
| memcpy(&fr_udp_pkt->data[sizeof(global_stats_t)], |
| &chan->drvstats_rx_intr.rx_intr_no_socket, |
| sizeof(rx_intr_stat_t)); |
| |
| mbox->cmd.length = fr_udp_pkt->cblock.length = |
| sizeof(global_stats_t) + |
| sizeof(rx_intr_stat_t); |
| fr_udp_pkt->cblock.result = 0; |
| break; |
| |
| case FPIPE_DRIVER_STAT_GEN: |
| memcpy(fr_udp_pkt->data, |
| &chan->drvstats_gen.UDP_PIPE_mgmt_kmalloc_err, |
| sizeof(pipe_mgmt_stat_t)); |
| |
| memcpy(&fr_udp_pkt->data[sizeof(pipe_mgmt_stat_t)], |
| &card->statistics, sizeof(global_stats_t)); |
| |
| mbox->cmd.length = fr_udp_pkt->cblock.length = sizeof(global_stats_t)+ |
| sizeof(rx_intr_stat_t); |
| fr_udp_pkt->cblock.result = 0; |
| break; |
| |
| |
| case FR_FT1_STATUS_CTRL: |
| if(fr_udp_pkt->data[0] == 1) { |
| if(rCount++ != 0 ){ |
| fr_udp_pkt->cblock.result = 0; |
| mbox->cmd.length = 1; |
| break; |
| } |
| } |
| |
| /* Disable FT1 MONITOR STATUS */ |
| if(fr_udp_pkt->data[0] == 0) { |
| if( --rCount != 0) { |
| fr_udp_pkt->cblock.result = 0; |
| mbox->cmd.length = 1; |
| break; |
| } |
| } |
| goto udp_mgmt_dflt; |
| |
| |
| default: |
| udp_mgmt_dflt: |
| do { |
| memcpy(&mbox->cmd, |
| &fr_udp_pkt->cblock.command, |
| sizeof(fr_cmd_t)); |
| if(mbox->cmd.length) { |
| memcpy(&mbox->data, |
| (char *)fr_udp_pkt->data, |
| mbox->cmd.length); |
| } |
| |
| err = sdla_exec(mbox) ? mbox->cmd.result : |
| CMD_TIMEOUT; |
| } while (err && c_retry-- && fr_event(card, err, mbox)); |
| |
| if(!err) |
| chan->drvstats_gen. |
| UDP_PIPE_mgmt_adptr_cmnd_OK ++; |
| else |
| chan->drvstats_gen. |
| UDP_PIPE_mgmt_adptr_cmnd_timeout ++; |
| |
| /* copy the result back to our buffer */ |
| memcpy(&fr_udp_pkt->cblock.command, |
| &mbox->cmd, sizeof(fr_cmd_t)); |
| |
| if(mbox->cmd.length) { |
| memcpy(&fr_udp_pkt->data, |
| &mbox->data, mbox->cmd.length); |
| } |
| } |
| } |
| |
| /* Fill UDP TTL */ |
| fr_udp_pkt->ip_pkt.ttl = card->wandev.ttl; |
| len = reply_udp(card->u.f.udp_pkt_data, mbox->cmd.length); |
| |
| if(udp_pkt_src == UDP_PKT_FRM_NETWORK) { |
| |
| chan->fr_header_len=2; |
| chan->fr_header[0]=Q922_UI; |
| chan->fr_header[1]=NLPID_IP; |
| |
| err = fr_send_data_header(card, dlci, 0, len, |
| card->u.f.udp_pkt_data,chan->fr_header_len); |
| if (err){ |
| chan->drvstats_gen.UDP_PIPE_mgmt_adptr_send_passed ++; |
| }else{ |
| chan->drvstats_gen.UDP_PIPE_mgmt_adptr_send_failed ++; |
| } |
| |
| } else { |
| /* Allocate socket buffer */ |
| if((new_skb = dev_alloc_skb(len)) != NULL) { |
| |
| /* copy data into new_skb */ |
| buf = skb_put(new_skb, len); |
| memcpy(buf, card->u.f.udp_pkt_data, len); |
| |
| chan->drvstats_gen. |
| UDP_PIPE_mgmt_passed_to_stack ++; |
| new_skb->dev = dev; |
| new_skb->protocol = htons(ETH_P_IP); |
| new_skb->mac.raw = new_skb->data; |
| netif_rx(new_skb); |
| |
| } else { |
| chan->drvstats_gen.UDP_PIPE_mgmt_no_socket ++; |
| printk(KERN_INFO |
| "%s: UDP mgmt cmnd, no socket buffers available!\n", |
| card->devname); |
| } |
| } |
| |
| card->u.f.udp_pkt_lgth = 0; |
| |
| return 1; |
| } |
| |
| /*============================================================================== |
| * Send Inverse ARP Request |
| */ |
| |
| int send_inarp_request(sdla_t *card, struct net_device *dev) |
| { |
| int err=0; |
| |
| arphdr_1490_t *ArpPacket; |
| arphdr_fr_t *arphdr; |
| fr_channel_t *chan = dev->priv; |
| struct in_device *in_dev; |
| |
| in_dev = dev->ip_ptr; |
| |
| if(in_dev != NULL ) { |
| |
| ArpPacket = kmalloc(sizeof(arphdr_1490_t) + sizeof(arphdr_fr_t), GFP_ATOMIC); |
| /* SNAP Header indicating ARP */ |
| ArpPacket->control = 0x03; |
| ArpPacket->pad = 0x00; |
| ArpPacket->NLPID = 0x80; |
| ArpPacket->OUI[0] = 0; |
| ArpPacket->OUI[1] = 0; |
| ArpPacket->OUI[2] = 0; |
| ArpPacket->PID = 0x0608; |
| |
| arphdr = (arphdr_fr_t *)(ArpPacket + 1); // Go to ARP Packet |
| |
| /* InARP request */ |
| arphdr->ar_hrd = 0x0F00; /* Frame Relay HW type */ |
| arphdr->ar_pro = 0x0008; /* IP Protocol */ |
| arphdr->ar_hln = 2; /* HW addr length */ |
| arphdr->ar_pln = 4; /* IP addr length */ |
| arphdr->ar_op = htons(0x08); /* InARP Request */ |
| arphdr->ar_sha = 0; /* src HW DLCI - Doesn't matter */ |
| if(in_dev->ifa_list != NULL) |
| arphdr->ar_sip = in_dev->ifa_list->ifa_local; /* Local Address */else |
| arphdr->ar_sip = 0; |
| arphdr->ar_tha = 0; /* dst HW DLCI - Doesn't matter */ |
| arphdr->ar_tip = 0; /* Remote Address -- what we want */ |
| |
| err = fr_send(card, chan->dlci, 0, sizeof(arphdr_1490_t) + sizeof(arphdr_fr_t), |
| (void *)ArpPacket); |
| |
| if (!err){ |
| printk(KERN_INFO "\n%s: Sending InARP request on DLCI %d.\n", |
| card->devname, chan->dlci); |
| clear_bit(ARP_CRIT,&card->wandev.critical); |
| } |
| |
| kfree(ArpPacket); |
| }else{ |
| printk(KERN_INFO "%s: INARP ERROR: %s doesn't have a local IP address!\n", |
| card->devname,dev->name); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| |
| /*============================================================================== |
| * Check packet for ARP Type |
| */ |
| |
| int is_arp(void *buf) |
| { |
| arphdr_1490_t *arphdr = (arphdr_1490_t *)buf; |
| |
| if (arphdr->pad == 0x00 && |
| arphdr->NLPID == 0x80 && |
| arphdr->PID == 0x0608) |
| return 1; |
| else return 0; |
| } |
| |
| /*============================================================================== |
| * Process ARP Packet Type |
| */ |
| |
| int process_ARP(arphdr_1490_t *ArpPacket, sdla_t *card, struct net_device* dev) |
| { |
| |
| |
| arphdr_fr_t *arphdr = (arphdr_fr_t *)(ArpPacket + 1); /* Skip header */ |
| fr_rx_buf_ctl_t* frbuf = card->rxmb; |
| struct in_device *in_dev; |
| fr_channel_t *chan = dev->priv; |
| |
| /* Before we transmit ARP packet, we must check |
| * to see that we are not currently transmitting a |
| * frame (in 'if_send()') and that we are not |
| * already in a 'delayed transmit' state. */ |
| if (check_tx_status(card,dev)){ |
| if (net_ratelimit()){ |
| printk(KERN_INFO "%s: Disabling comminication to process ARP\n", |
| card->devname); |
| } |
| set_bit(ARP_CRIT,&card->wandev.critical); |
| return 0; |
| } |
| |
| in_dev = dev->ip_ptr; |
| |
| /* Check that IP addresses exist for our network address */ |
| if (in_dev == NULL || in_dev->ifa_list == NULL) |
| return -1; |
| |
| switch (ntohs(arphdr->ar_op)) { |
| |
| case 0x08: // Inverse ARP request -- Send Reply, add route. |
| |
| /* Check for valid Address */ |
| printk(KERN_INFO "%s: Recvd PtP addr -InArp Req: %u.%u.%u.%u\n", |
| card->devname, NIPQUAD(arphdr->ar_sip)); |
| |
| |
| /* Check that the network address is the same as ours, only |
| * if the netowrk mask is not 255.255.255.255. Otherwise |
| * this check would not make sense */ |
| |
| if (in_dev->ifa_list->ifa_mask != 0xFFFFFFFF && |
| (in_dev->ifa_list->ifa_mask & arphdr->ar_sip) != |
| (in_dev->ifa_list->ifa_mask & in_dev->ifa_list->ifa_local)){ |
| printk(KERN_INFO |
| "%s: Invalid PtP address. %u.%u.%u.%u InARP ignored.\n", |
| card->devname,NIPQUAD(arphdr->ar_sip)); |
| |
| printk(KERN_INFO "%s: mask %u.%u.%u.%u\n", |
| card->devname, NIPQUAD(in_dev->ifa_list->ifa_mask)); |
| printk(KERN_INFO "%s: local %u.%u.%u.%u\n", |
| card->devname,NIPQUAD(in_dev->ifa_list->ifa_local)); |
| return -1; |
| } |
| |
| if (in_dev->ifa_list->ifa_local == arphdr->ar_sip){ |
| printk(KERN_INFO |
| "%s: Local addr = PtP addr. InARP ignored.\n", |
| card->devname); |
| return -1; |
| } |
| |
| arphdr->ar_op = htons(0x09); /* InARP Reply */ |
| |
| /* Set addresses */ |
| arphdr->ar_tip = arphdr->ar_sip; |
| arphdr->ar_sip = in_dev->ifa_list->ifa_local; |
| |
| chan->ip_local = in_dev->ifa_list->ifa_local; |
| chan->ip_remote = arphdr->ar_sip; |
| |
| fr_send(card, frbuf->dlci, 0, frbuf->length, (void *)ArpPacket); |
| |
| if (test_bit(ARP_CRIT,&card->wandev.critical)){ |
| if (net_ratelimit()){ |
| printk(KERN_INFO "%s: ARP Processed Enabling Communication!\n", |
| card->devname); |
| } |
| } |
| clear_bit(ARP_CRIT,&card->wandev.critical); |
| |
| chan->ip_local = in_dev->ifa_list->ifa_local; |
| chan->ip_remote = arphdr->ar_sip; |
| |
| /* Add Route Flag */ |
| /* The route will be added in the polling routine so |
| that it is not interrupt context. */ |
| |
| chan->route_flag = ADD_ROUTE; |
| trigger_fr_poll (dev); |
| |
| break; |
| |
| case 0x09: // Inverse ARP reply |
| |
| /* Check for valid Address */ |
| printk(KERN_INFO "%s: Recvd PtP addr %u.%u.%u.%u -InArp Reply\n", |
| card->devname, NIPQUAD(arphdr->ar_sip)); |
| |
| |
| /* Compare network addresses, only if network mask |
| * is not 255.255.255.255 It would not make sense |
| * to perform this test if the mask was all 1's */ |
| |
| if (in_dev->ifa_list->ifa_mask != 0xffffffff && |
| (in_dev->ifa_list->ifa_mask & arphdr->ar_sip) != |
| (in_dev->ifa_list->ifa_mask & in_dev->ifa_list->ifa_local)) { |
| |
| printk(KERN_INFO "%s: Invalid PtP address. InARP ignored.\n", |
| card->devname); |
| return -1; |
| } |
| |
| /* Make sure that the received IP address is not |
| * the same as our own local address */ |
| if (in_dev->ifa_list->ifa_local == arphdr->ar_sip) { |
| printk(KERN_INFO "%s: Local addr = PtP addr. InARP ignored.\n", |
| card->devname); |
| return -1; |
| } |
| |
| chan->ip_local = in_dev->ifa_list->ifa_local; |
| chan->ip_remote = arphdr->ar_sip; |
| |
| /* Add Route Flag */ |
| /* The route will be added in the polling routine so |
| that it is not interrupt context. */ |
| |
| chan->route_flag = ADD_ROUTE; |
| chan->inarp = INARP_CONFIGURED; |
| trigger_fr_poll(dev); |
| |
| break; |
| default: |
| break; // ARP's and RARP's -- Shouldn't happen. |
| } |
| |
| return 0; |
| } |
| |
| |
| /*============================================================ |
| * trigger_fr_arp |
| * |
| * Description: |
| * Add an fr_arp() task into a arp |
| * timer handler for a specific dlci/interface. |
| * This will kick the fr_arp() routine |
| * within the specified time interval. |
| * |
| * Usage: |
| * This timer is used to send ARP requests at |
| * certain time intervals. |
| * Called by an interrupt to request an action |
| * at a later date. |
| */ |
| |
| static void trigger_fr_arp(struct net_device *dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| |
| mod_timer(&chan->fr_arp_timer, jiffies + chan->inarp_interval * HZ); |
| return; |
| } |
| |
| |
| |
| /*============================================================================== |
| * ARP Request Action |
| * |
| * This funciton is called by timer interrupt to send an arp request |
| * to the remote end. |
| */ |
| |
| static void fr_arp (unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| fr_channel_t *chan = dev->priv; |
| volatile sdla_t *card = chan->card; |
| fr508_flags_t* flags = card->flags; |
| |
| /* Send ARP packets for all devs' until |
| * ARP state changes to CONFIGURED */ |
| |
| if (chan->inarp == INARP_REQUEST && |
| chan->common.state == WAN_CONNECTED && |
| card->wandev.state == WAN_CONNECTED){ |
| set_bit(0,&chan->inarp_ready); |
| card->u.f.timer_int_enabled |= TMR_INT_ENABLED_ARP; |
| flags->imask |= FR_INTR_TIMER; |
| } |
| |
| return; |
| } |
| |
| |
| /*============================================================================== |
| * Perform the Interrupt Test by running the READ_CODE_VERSION command MAX_INTR_ |
| * TEST_COUNTER times. |
| */ |
| static int intr_test( sdla_t* card ) |
| { |
| fr_mbox_t* mb = card->mbox; |
| int err,i; |
| |
| err = fr_set_intr_mode(card, FR_INTR_READY, card->wandev.mtu, 0 ); |
| |
| if (err == CMD_OK) { |
| |
| for ( i = 0; i < MAX_INTR_TEST_COUNTER; i++ ) { |
| /* Run command READ_CODE_VERSION */ |
| mb->cmd.length = 0; |
| mb->cmd.command = FR_READ_CODE_VERSION; |
| err = sdla_exec(mb) ? mb->cmd.result : CMD_TIMEOUT; |
| if (err != CMD_OK) |
| fr_event(card, err, mb); |
| } |
| |
| } else { |
| return err; |
| } |
| |
| err = fr_set_intr_mode( card, 0, card->wandev.mtu, 0 ); |
| |
| if( err != CMD_OK ) |
| return err; |
| |
| return 0; |
| } |
| |
| /*============================================================================== |
| * Determine what type of UDP call it is. FPIPE8ND ? |
| */ |
| static int udp_pkt_type( struct sk_buff *skb, sdla_t* card ) |
| { |
| fr_udp_pkt_t *fr_udp_pkt = (fr_udp_pkt_t *)skb->data; |
| |
| /* Quick HACK */ |
| |
| |
| if((fr_udp_pkt->ip_pkt.protocol == UDPMGMT_UDP_PROTOCOL) && |
| (fr_udp_pkt->ip_pkt.ver_inet_hdr_length == 0x45) && |
| (fr_udp_pkt->udp_pkt.udp_dst_port == |
| ntohs(card->wandev.udp_port)) && |
| (fr_udp_pkt->wp_mgmt.request_reply == |
| UDPMGMT_REQUEST)) { |
| if(!strncmp(fr_udp_pkt->wp_mgmt.signature, |
| UDPMGMT_FPIPE_SIGNATURE, 8)){ |
| return UDP_FPIPE_TYPE; |
| } |
| } |
| return UDP_INVALID_TYPE; |
| } |
| |
| |
| /*============================================================================== |
| * Initializes the Statistics values in the fr_channel structure. |
| */ |
| void init_chan_statistics( fr_channel_t* chan) |
| { |
| memset(&chan->drvstats_if_send.if_send_entry, 0, |
| sizeof(if_send_stat_t)); |
| memset(&chan->drvstats_rx_intr.rx_intr_no_socket, 0, |
| sizeof(rx_intr_stat_t)); |
| memset(&chan->drvstats_gen.UDP_PIPE_mgmt_kmalloc_err, 0, |
| sizeof(pipe_mgmt_stat_t)); |
| } |
| |
| /*============================================================================== |
| * Initializes the Statistics values in the Sdla_t structure. |
| */ |
| void init_global_statistics( sdla_t* card ) |
| { |
| /* Intialize global statistics for a card */ |
| memset(&card->statistics.isr_entry, 0, sizeof(global_stats_t)); |
| } |
| |
| static void read_DLCI_IB_mapping( sdla_t* card, fr_channel_t* chan ) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int retry = MAX_CMD_RETRY; |
| dlci_IB_mapping_t* result; |
| int err, counter, found; |
| |
| do { |
| mbox->cmd.command = FR_READ_DLCI_IB_MAPPING; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| } while (err && retry-- && fr_event(card, err, mbox)); |
| |
| if( mbox->cmd.result != 0){ |
| printk(KERN_INFO "%s: Read DLCI IB Mapping failed\n", |
| chan->name); |
| } |
| |
| counter = mbox->cmd.length / sizeof(dlci_IB_mapping_t); |
| result = (void *)mbox->data; |
| |
| found = 0; |
| for (; counter; --counter, ++result) { |
| if ( result->dlci == chan->dlci ) { |
| chan->IB_addr = result->addr_value; |
| if(card->hw.type == SDLA_S514){ |
| chan->dlci_int_interface = |
| (void*)(card->hw.dpmbase + |
| chan->IB_addr); |
| }else{ |
| chan->dlci_int_interface = |
| (void*)(card->hw.dpmbase + |
| (chan->IB_addr & 0x00001FFF)); |
| |
| } |
| found = 1; |
| break; |
| } |
| } |
| if (!found) |
| printk( KERN_INFO "%s: DLCI %d not found by IB MAPPING cmd\n", |
| card->devname, chan->dlci); |
| } |
| |
| |
| |
| void s508_s514_lock(sdla_t *card, unsigned long *smp_flags) |
| { |
| if (card->hw.type != SDLA_S514){ |
| |
| spin_lock_irqsave(&card->wandev.lock, *smp_flags); |
| }else{ |
| spin_lock(&card->u.f.if_send_lock); |
| } |
| return; |
| } |
| |
| |
| void s508_s514_unlock(sdla_t *card, unsigned long *smp_flags) |
| { |
| if (card->hw.type != SDLA_S514){ |
| |
| spin_unlock_irqrestore (&card->wandev.lock, *smp_flags); |
| }else{ |
| spin_unlock(&card->u.f.if_send_lock); |
| } |
| return; |
| } |
| |
| |
| |
| /*---------------------------------------------------------------------- |
| RECEIVE INTERRUPT: BOTTOM HALF HANDLERS |
| ----------------------------------------------------------------------*/ |
| |
| |
| /*======================================================== |
| * bh_enqueue |
| * |
| * Description: |
| * Insert a received packet into a circular |
| * rx queue. This packet will be picked up |
| * by fr_bh() and sent up the stack to the |
| * user. |
| * |
| * Usage: |
| * This function is called by rx interrupt, |
| * in API mode. |
| * |
| */ |
| |
| static int bh_enqueue(struct net_device *dev, struct sk_buff *skb) |
| { |
| /* Check for full */ |
| fr_channel_t* chan = dev->priv; |
| sdla_t *card = chan->card; |
| |
| |
| if (atomic_read(&chan->bh_buff_used) == MAX_BH_BUFF){ |
| ++card->wandev.stats.rx_dropped; |
| dev_kfree_skb_any(skb); |
| return 1; |
| } |
| |
| ((bh_data_t *)&chan->bh_head[chan->bh_write])->skb = skb; |
| |
| if (chan->bh_write == (MAX_BH_BUFF-1)){ |
| chan->bh_write=0; |
| }else{ |
| ++chan->bh_write; |
| } |
| |
| atomic_inc(&chan->bh_buff_used); |
| |
| return 0; |
| } |
| |
| |
| /*======================================================== |
| * trigger_fr_bh |
| * |
| * Description: |
| * Kick the fr_bh() handler |
| * |
| * Usage: |
| * rx interrupt calls this function during |
| * the API mode. |
| */ |
| |
| static void trigger_fr_bh (fr_channel_t *chan) |
| { |
| if (!test_and_set_bit(0,&chan->tq_working)){ |
| wanpipe_queue_work(&chan->common.wanpipe_work); |
| } |
| } |
| |
| |
| /*======================================================== |
| * fr_bh |
| * |
| * Description: |
| * Frame relay receive BH handler. |
| * Dequeue data from the BH circular |
| * buffer and pass it up the API sock. |
| * |
| * Rationale: |
| * This fuction is used to offload the |
| * rx_interrupt during API operation mode. |
| * The fr_bh() function executes for each |
| * dlci/interface. |
| * |
| * Once receive interrupt copies data from the |
| * card into an skb buffer, the skb buffer |
| * is appended to a circular BH buffer. |
| * Then the interrupt kicks fr_bh() to finish the |
| * job at a later time (not within the interrupt). |
| * |
| * Usage: |
| * Interrupts use this to defer a task to |
| * a polling routine. |
| * |
| */ |
| |
| static void fr_bh(struct net_device * dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| sdla_t *card = chan->card; |
| struct sk_buff *skb; |
| |
| if (atomic_read(&chan->bh_buff_used) == 0){ |
| clear_bit(0, &chan->tq_working); |
| return; |
| } |
| |
| while (atomic_read(&chan->bh_buff_used)){ |
| |
| if (chan->common.sk == NULL || chan->common.func == NULL){ |
| clear_bit(0, &chan->tq_working); |
| return; |
| } |
| |
| skb = ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb; |
| |
| if (skb != NULL){ |
| |
| if (chan->common.sk == NULL || chan->common.func == NULL){ |
| ++card->wandev.stats.rx_dropped; |
| ++chan->ifstats.rx_dropped; |
| dev_kfree_skb_any(skb); |
| fr_bh_cleanup(dev); |
| continue; |
| } |
| |
| if (chan->common.func(skb,dev,chan->common.sk) != 0){ |
| /* Sock full cannot send, queue us for |
| * another try */ |
| atomic_set(&chan->common.receive_block,1); |
| return; |
| }else{ |
| fr_bh_cleanup(dev); |
| } |
| }else{ |
| fr_bh_cleanup(dev); |
| } |
| } |
| clear_bit(0, &chan->tq_working); |
| |
| return; |
| } |
| |
| static int fr_bh_cleanup(struct net_device *dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| |
| ((bh_data_t *)&chan->bh_head[chan->bh_read])->skb = NULL; |
| |
| if (chan->bh_read == (MAX_BH_BUFF-1)){ |
| chan->bh_read=0; |
| }else{ |
| ++chan->bh_read; |
| } |
| |
| atomic_dec(&chan->bh_buff_used); |
| return 0; |
| } |
| |
| |
| /*---------------------------------------------------------------------- |
| POLL BH HANDLERS AND KICK ROUTINES |
| ----------------------------------------------------------------------*/ |
| |
| /*============================================================ |
| * trigger_fr_poll |
| * |
| * Description: |
| * Add a fr_poll() task into a tq_scheduler bh handler |
| * for a specific dlci/interface. This will kick |
| * the fr_poll() routine at a later time. |
| * |
| * Usage: |
| * Interrupts use this to defer a taks to |
| * a polling routine. |
| * |
| */ |
| static void trigger_fr_poll(struct net_device *dev) |
| { |
| fr_channel_t* chan = dev->priv; |
| schedule_work(&chan->fr_poll_work); |
| return; |
| } |
| |
| |
| /*============================================================ |
| * fr_poll |
| * |
| * Rationale: |
| * We cannot manipulate the routing tables, or |
| * ip addresses withing the interrupt. Therefore |
| * we must perform such actons outside an interrupt |
| * at a later time. |
| * |
| * Description: |
| * Frame relay polling routine, responsible for |
| * shutting down interfaces upon disconnect |
| * and adding/removing routes. |
| * |
| * Usage: |
| * This function is executed for each frame relay |
| * dlci/interface through a tq_schedule bottom half. |
| * |
| * trigger_fr_poll() function is used to kick |
| * the fr_poll routine. |
| */ |
| |
| static void fr_poll(struct net_device *dev) |
| { |
| |
| fr_channel_t* chan; |
| sdla_t *card; |
| u8 check_gateway=0; |
| |
| if (!dev || (chan = dev->priv) == NULL) |
| return; |
| |
| card = chan->card; |
| |
| /* (Re)Configuraiton is in progress, stop what you are |
| * doing and get out */ |
| if (test_bit(PERI_CRIT,&card->wandev.critical)){ |
| return; |
| } |
| |
| switch (chan->common.state){ |
| |
| case WAN_DISCONNECTED: |
| |
| if (test_bit(DYN_OPT_ON,&chan->interface_down) && |
| !test_bit(DEV_DOWN, &chan->interface_down) && |
| dev->flags&IFF_UP){ |
| |
| printk(KERN_INFO "%s: Interface %s is Down.\n", |
| card->devname,dev->name); |
| change_dev_flags(dev,dev->flags&~IFF_UP); |
| set_bit(DEV_DOWN, &chan->interface_down); |
| chan->route_flag = NO_ROUTE; |
| |
| }else{ |
| if (chan->inarp != INARP_NONE) |
| process_route(dev); |
| } |
| break; |
| |
| case WAN_CONNECTED: |
| |
| if (test_bit(DYN_OPT_ON,&chan->interface_down) && |
| test_bit(DEV_DOWN, &chan->interface_down) && |
| !(dev->flags&IFF_UP)){ |
| |
| printk(KERN_INFO "%s: Interface %s is Up.\n", |
| card->devname,dev->name); |
| |
| change_dev_flags(dev,dev->flags|IFF_UP); |
| clear_bit(DEV_DOWN, &chan->interface_down); |
| check_gateway=1; |
| } |
| |
| if (chan->inarp != INARP_NONE){ |
| process_route(dev); |
| check_gateway=1; |
| } |
| |
| if (chan->gateway && check_gateway) |
| add_gateway(card,dev); |
| |
| break; |
| |
| } |
| |
| return; |
| } |
| |
| /*============================================================== |
| * check_tx_status |
| * |
| * Rationale: |
| * We cannot transmit from an interrupt while |
| * the if_send is transmitting data. Therefore, |
| * we must check whether the tx buffers are |
| * begin used, before we transmit from an |
| * interrupt. |
| * |
| * Description: |
| * Checks whether it's safe to use the transmit |
| * buffers. |
| * |
| * Usage: |
| * ARP and UDP handling routines use this function |
| * because, they need to transmit data during |
| * an interrupt. |
| */ |
| |
| static int check_tx_status(sdla_t *card, struct net_device *dev) |
| { |
| |
| if (card->hw.type == SDLA_S514){ |
| if (test_bit(SEND_CRIT, (void*)&card->wandev.critical) || |
| test_bit(SEND_TXIRQ_CRIT, (void*)&card->wandev.critical)) { |
| return 1; |
| } |
| } |
| |
| if (netif_queue_stopped(dev) || (card->u.f.tx_interrupts_pending)) |
| return 1; |
| |
| return 0; |
| } |
| |
| /*=============================================================== |
| * move_dev_to_next |
| * |
| * Description: |
| * Move the dev pointer to the next location in the |
| * link list. Check if we are at the end of the |
| * list, if so start from the begining. |
| * |
| * Usage: |
| * Timer interrupt uses this function to efficiently |
| * step through the devices that need to send ARP data. |
| * |
| */ |
| |
| struct net_device *move_dev_to_next(sdla_t *card, struct net_device *dev) |
| { |
| if (card->wandev.new_if_cnt != 1){ |
| if (!*((struct net_device **)dev->priv)) |
| return card->wandev.dev; |
| else |
| return *((struct net_device **)dev->priv); |
| } |
| return dev; |
| } |
| |
| /*============================================================== |
| * trigger_config_fr |
| * |
| * Rationale: |
| * All commands must be performed inside of a |
| * interrupt. |
| * |
| * Description: |
| * Kick the config_fr() routine throught the |
| * timer interrupt. |
| */ |
| |
| |
| static void trigger_config_fr (sdla_t *card) |
| { |
| fr508_flags_t* flags = card->flags; |
| |
| card->u.f.timer_int_enabled |= TMR_INT_ENABLED_CONFIG; |
| flags->imask |= FR_INTR_TIMER; |
| } |
| |
| |
| /*============================================================== |
| * config_fr |
| * |
| * Rationale: |
| * All commands must be performed inside of a |
| * interrupt. |
| & |
| * Description: |
| * Configure a DLCI. This function is executed |
| * by a timer_interrupt. The if_open() function |
| * triggers it. |
| * |
| * Usage: |
| * new_if() collects all data necessary to |
| * configure the DLCI. It sets the chan->dlci_ready |
| * bit. When the if_open() function is executed |
| * it checks this bit, and if its set it triggers |
| * the timer interrupt to execute the config_fr() |
| * function. |
| */ |
| |
| static void config_fr (sdla_t *card) |
| { |
| struct net_device *dev; |
| fr_channel_t *chan; |
| |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)) { |
| |
| if ((chan=dev->priv) == NULL) |
| continue; |
| |
| if (!test_bit(0,&chan->config_dlci)) |
| continue; |
| |
| clear_bit(0,&chan->config_dlci); |
| |
| /* If signalling is set to NO, then setup |
| * DLCI addresses right away. Don't have to wait for |
| * link to connect. |
| */ |
| if (card->wandev.signalling == WANOPT_NO){ |
| printk(KERN_INFO "%s: Signalling set to NO: Mapping DLCI's\n", |
| card->wandev.name); |
| if (fr_init_dlci(card,chan)){ |
| printk(KERN_INFO "%s: ERROR: Failed to configure DLCI %i !\n", |
| card->devname, chan->dlci); |
| return; |
| } |
| } |
| |
| if (card->wandev.station == WANOPT_CPE) { |
| |
| update_chan_state(dev); |
| |
| /* CPE: issue full status enquiry */ |
| fr_issue_isf(card, FR_ISF_FSE); |
| |
| } else { |
| /* FR switch: activate DLCI(s) */ |
| |
| /* For Switch emulation we have to ADD and ACTIVATE |
| * the DLCI(s) that were configured with the SET_DLCI_ |
| * CONFIGURATION command. Add and Activate will fail if |
| * DLCI specified is not included in the list. |
| * |
| * Also If_open is called once for each interface. But |
| * it does not get in here for all the interface. So |
| * we have to pass the entire list of DLCI(s) to add |
| * activate routines. |
| */ |
| |
| if (!check_dlci_config (card, chan)){ |
| fr_add_dlci(card, chan->dlci); |
| fr_activate_dlci(card, chan->dlci); |
| } |
| } |
| |
| card->u.f.dlci_to_dev_map[chan->dlci] = dev; |
| } |
| return; |
| } |
| |
| |
| /*============================================================== |
| * config_fr |
| * |
| * Rationale: |
| * All commands must be executed during an interrupt. |
| * |
| * Description: |
| * Trigger uncofig_fr() function through |
| * the timer interrupt. |
| * |
| */ |
| |
| static void trigger_unconfig_fr(struct net_device *dev) |
| { |
| fr_channel_t *chan = dev->priv; |
| volatile sdla_t *card = chan->card; |
| u32 timeout; |
| fr508_flags_t* flags = card->flags; |
| int reset_critical=0; |
| |
| if (test_bit(PERI_CRIT,(void*)&card->wandev.critical)){ |
| clear_bit(PERI_CRIT,(void*)&card->wandev.critical); |
| reset_critical=1; |
| } |
| |
| /* run unconfig_dlci() function |
| * throught the timer interrupt */ |
| set_bit(0,(void*)&chan->unconfig_dlci); |
| card->u.f.timer_int_enabled |= TMR_INT_ENABLED_UNCONFIG; |
| flags->imask |= FR_INTR_TIMER; |
| |
| /* Wait for the command to complete */ |
| timeout = jiffies; |
| for(;;) { |
| |
| if(!(card->u.f.timer_int_enabled & TMR_INT_ENABLED_UNCONFIG)) |
| break; |
| |
| if ((jiffies - timeout) > (1 * HZ)){ |
| card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UNCONFIG; |
| printk(KERN_INFO "%s: Failed to delete DLCI %i\n", |
| card->devname,chan->dlci); |
| break; |
| } |
| } |
| |
| if (reset_critical){ |
| set_bit(PERI_CRIT,(void*)&card->wandev.critical); |
| } |
| } |
| |
| /*============================================================== |
| * unconfig_fr |
| * |
| * Rationale: |
| * All commands must be executed during an interrupt. |
| * |
| * Description: |
| * Remove the dlci from firmware. |
| * This funciton is used in NODE shutdown. |
| */ |
| |
| static void unconfig_fr (sdla_t *card) |
| { |
| struct net_device *dev; |
| fr_channel_t *chan; |
| |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)){ |
| |
| if ((chan=dev->priv) == NULL) |
| continue; |
| |
| if (!test_bit(0,&chan->unconfig_dlci)) |
| continue; |
| |
| clear_bit(0,&chan->unconfig_dlci); |
| |
| if (card->wandev.station == WANOPT_NODE){ |
| printk(KERN_INFO "%s: Unconfiguring DLCI %i\n", |
| card->devname,chan->dlci); |
| fr_delete_dlci(card,chan->dlci); |
| } |
| card->u.f.dlci_to_dev_map[chan->dlci] = NULL; |
| } |
| } |
| |
| static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev, |
| char op_mode) |
| { |
| struct sk_buff *skb = *skb_orig; |
| fr_channel_t *chan=dev->priv; |
| |
| if (op_mode == WANPIPE){ |
| |
| chan->fr_header[0]=Q922_UI; |
| |
| switch (htons(skb->protocol)){ |
| |
| case ETH_P_IP: |
| chan->fr_header[1]=NLPID_IP; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 2; |
| } |
| |
| /* If we are in bridging mode, we must apply |
| * an Ethernet header */ |
| if (op_mode == BRIDGE || op_mode == BRIDGE_NODE){ |
| |
| |
| /* Encapsulate the packet as a bridged Ethernet frame. */ |
| #ifdef DEBUG |
| printk(KERN_INFO "%s: encapsulating skb for frame relay\n", |
| dev->name); |
| #endif |
| |
| chan->fr_header[0] = 0x03; |
| chan->fr_header[1] = 0x00; |
| chan->fr_header[2] = 0x80; |
| chan->fr_header[3] = 0x00; |
| chan->fr_header[4] = 0x80; |
| chan->fr_header[5] = 0xC2; |
| chan->fr_header[6] = 0x00; |
| chan->fr_header[7] = 0x07; |
| |
| /* Yuck. */ |
| skb->protocol = ETH_P_802_3; |
| return 8; |
| |
| } |
| |
| return 0; |
| } |
| |
| |
| static int check_dlci_config (sdla_t *card, fr_channel_t *chan) |
| { |
| fr_mbox_t* mbox = card->mbox; |
| int err=0; |
| fr_conf_t *conf=NULL; |
| unsigned short dlci_num = chan->dlci; |
| int dlci_offset=0; |
| struct net_device *dev = NULL; |
| |
| mbox->cmd.command = FR_READ_CONFIG; |
| mbox->cmd.length = 0; |
| mbox->cmd.dlci = dlci_num; |
| |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| if (err == CMD_OK){ |
| return 0; |
| } |
| |
| for (dev = card->wandev.dev; dev; |
| dev=*((struct net_device **)dev->priv)) |
| set_chan_state(dev,WAN_DISCONNECTED); |
| |
| printk(KERN_INFO "DLCI %i Not configured, configuring\n",dlci_num); |
| |
| mbox->cmd.command = FR_COMM_DISABLE; |
| mbox->cmd.length = 0; |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| if (err != CMD_OK){ |
| fr_event(card, err, mbox); |
| return 2; |
| } |
| |
| printk(KERN_INFO "Disabled Communications \n"); |
| |
| mbox->cmd.command = FR_READ_CONFIG; |
| mbox->cmd.length = 0; |
| mbox->cmd.dlci = 0; |
| |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| if (err != CMD_OK){ |
| fr_event(card, err, mbox); |
| return 2; |
| } |
| |
| conf = (fr_conf_t *)mbox->data; |
| |
| dlci_offset=0; |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)) { |
| fr_channel_t *chan_tmp = dev->priv; |
| conf->dlci[dlci_offset] = chan_tmp->dlci; |
| dlci_offset++; |
| } |
| |
| printk(KERN_INFO "Got Fr configuration Buffer Length is %x Dlci %i Dlci Off %i\n", |
| mbox->cmd.length, |
| mbox->cmd.length > 0x20 ? conf->dlci[0] : -1, |
| dlci_offset ); |
| |
| mbox->cmd.length = 0x20 + dlci_offset*2; |
| |
| mbox->cmd.command = FR_SET_CONFIG; |
| mbox->cmd.dlci = 0; |
| |
| err = sdla_exec(mbox) ? mbox->cmd.result : CMD_TIMEOUT; |
| |
| if (err != CMD_OK){ |
| fr_event(card, err, mbox); |
| return 2; |
| } |
| |
| initialize_rx_tx_buffers (card); |
| |
| |
| printk(KERN_INFO "Configuraiton Succeded for new DLCI %i\n",dlci_num); |
| |
| if (fr_comm_enable (card)){ |
| return 2; |
| } |
| |
| printk(KERN_INFO "Enabling Communications \n"); |
| |
| for (dev = card->wandev.dev; dev; |
| dev = *((struct net_device **)dev->priv)) { |
| fr_channel_t *chan_tmp = dev->priv; |
| fr_init_dlci(card,chan_tmp); |
| fr_add_dlci(card, chan_tmp->dlci); |
| fr_activate_dlci(card, chan_tmp->dlci); |
| } |
| |
| printk(KERN_INFO "END OF CONFIGURAITON %i\n",dlci_num); |
| |
| return 1; |
| } |
| |
| static void initialize_rx_tx_buffers (sdla_t *card) |
| { |
| fr_buf_info_t* buf_info; |
| |
| if (card->hw.type == SDLA_S514) { |
| |
| buf_info = (void*)(card->hw.dpmbase + FR_MB_VECTOR + |
| FR508_RXBC_OFFS); |
| |
| card->rxmb = (void*)(buf_info->rse_next + card->hw.dpmbase); |
| |
| card->u.f.rxmb_base = |
| (void*)(buf_info->rse_base + card->hw.dpmbase); |
| |
| card->u.f.rxmb_last = |
| (void*)(buf_info->rse_base + |
| (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) + |
| card->hw.dpmbase); |
| }else{ |
| buf_info = (void*)(card->hw.dpmbase + FR508_RXBC_OFFS); |
| |
| card->rxmb = (void*)(buf_info->rse_next - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| |
| card->u.f.rxmb_base = |
| (void*)(buf_info->rse_base - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| |
| card->u.f.rxmb_last = |
| (void*)(buf_info->rse_base + |
| (buf_info->rse_num - 1) * sizeof(fr_rx_buf_ctl_t) - |
| FR_MB_VECTOR + card->hw.dpmbase); |
| } |
| |
| card->u.f.rx_base = buf_info->buf_base; |
| card->u.f.rx_top = buf_info->buf_top; |
| |
| card->u.f.tx_interrupts_pending = 0; |
| |
| return; |
| } |
| |
| |
| |
| MODULE_LICENSE("GPL"); |
| |
| /****** End *****************************************************************/ |