| /* |
| * linux/arch/arm/plat-omap/mcbsp.c |
| * |
| * Copyright (C) 2004 Nokia Corporation |
| * Author: Samuel Ortiz <samuel.ortiz@nokia.com> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Multichannel mode not supported. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/wait.h> |
| #include <linux/completion.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| |
| #include <mach/dma.h> |
| #include <mach/mcbsp.h> |
| |
| struct omap_mcbsp **mcbsp_ptr; |
| int omap_mcbsp_count; |
| |
| void omap_mcbsp_write(void __iomem *io_base, u16 reg, u32 val) |
| { |
| if (cpu_class_is_omap1() || cpu_is_omap2420()) |
| __raw_writew((u16)val, io_base + reg); |
| else |
| __raw_writel(val, io_base + reg); |
| } |
| |
| int omap_mcbsp_read(void __iomem *io_base, u16 reg) |
| { |
| if (cpu_class_is_omap1() || cpu_is_omap2420()) |
| return __raw_readw(io_base + reg); |
| else |
| return __raw_readl(io_base + reg); |
| } |
| |
| #define OMAP_MCBSP_READ(base, reg) \ |
| omap_mcbsp_read(base, OMAP_MCBSP_REG_##reg) |
| #define OMAP_MCBSP_WRITE(base, reg, val) \ |
| omap_mcbsp_write(base, OMAP_MCBSP_REG_##reg, val) |
| |
| #define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) |
| #define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; |
| |
| static void omap_mcbsp_dump_reg(u8 id) |
| { |
| struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id); |
| |
| dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); |
| dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, DRR2)); |
| dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, DRR1)); |
| dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, DXR2)); |
| dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, DXR1)); |
| dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, SPCR2)); |
| dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, SPCR1)); |
| dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, RCR2)); |
| dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, RCR1)); |
| dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, XCR2)); |
| dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, XCR1)); |
| dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, SRGR2)); |
| dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, SRGR1)); |
| dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", |
| OMAP_MCBSP_READ(mcbsp->io_base, PCR0)); |
| dev_dbg(mcbsp->dev, "***********************\n"); |
| } |
| |
| static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) |
| { |
| struct omap_mcbsp *mcbsp_tx = dev_id; |
| u16 irqst_spcr2; |
| |
| irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2); |
| dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); |
| |
| if (irqst_spcr2 & XSYNC_ERR) { |
| dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", |
| irqst_spcr2); |
| /* Writing zero to XSYNC_ERR clears the IRQ */ |
| OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2, |
| irqst_spcr2 & ~(XSYNC_ERR)); |
| } else { |
| complete(&mcbsp_tx->tx_irq_completion); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) |
| { |
| struct omap_mcbsp *mcbsp_rx = dev_id; |
| u16 irqst_spcr1; |
| |
| irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1); |
| dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); |
| |
| if (irqst_spcr1 & RSYNC_ERR) { |
| dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", |
| irqst_spcr1); |
| /* Writing zero to RSYNC_ERR clears the IRQ */ |
| OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1, |
| irqst_spcr1 & ~(RSYNC_ERR)); |
| } else { |
| complete(&mcbsp_rx->tx_irq_completion); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) |
| { |
| struct omap_mcbsp *mcbsp_dma_tx = data; |
| |
| dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n", |
| OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); |
| |
| /* We can free the channels */ |
| omap_free_dma(mcbsp_dma_tx->dma_tx_lch); |
| mcbsp_dma_tx->dma_tx_lch = -1; |
| |
| complete(&mcbsp_dma_tx->tx_dma_completion); |
| } |
| |
| static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) |
| { |
| struct omap_mcbsp *mcbsp_dma_rx = data; |
| |
| dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n", |
| OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); |
| |
| /* We can free the channels */ |
| omap_free_dma(mcbsp_dma_rx->dma_rx_lch); |
| mcbsp_dma_rx->dma_rx_lch = -1; |
| |
| complete(&mcbsp_dma_rx->rx_dma_completion); |
| } |
| |
| /* |
| * omap_mcbsp_config simply write a config to the |
| * appropriate McBSP. |
| * You either call this function or set the McBSP registers |
| * by yourself before calling omap_mcbsp_start(). |
| */ |
| void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| io_base = mcbsp->io_base; |
| dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", |
| mcbsp->id, mcbsp->phys_base); |
| |
| /* We write the given config */ |
| OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1); |
| OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2); |
| OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1); |
| OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2); |
| OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1); |
| OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2); |
| OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1); |
| OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); |
| OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); |
| OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); |
| if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) { |
| OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr); |
| OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr); |
| } |
| } |
| EXPORT_SYMBOL(omap_mcbsp_config); |
| |
| #ifdef CONFIG_ARCH_OMAP34XX |
| /* |
| * omap_mcbsp_set_tx_threshold configures how to deal |
| * with transmit threshold. the threshold value and handler can be |
| * configure in here. |
| */ |
| void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| |
| if (!cpu_is_omap34xx()) |
| return; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| io_base = mcbsp->io_base; |
| |
| OMAP_MCBSP_WRITE(io_base, THRSH2, threshold); |
| } |
| EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold); |
| |
| /* |
| * omap_mcbsp_set_rx_threshold configures how to deal |
| * with receive threshold. the threshold value and handler can be |
| * configure in here. |
| */ |
| void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| |
| if (!cpu_is_omap34xx()) |
| return; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| io_base = mcbsp->io_base; |
| |
| OMAP_MCBSP_WRITE(io_base, THRSH1, threshold); |
| } |
| EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); |
| |
| /* |
| * omap_mcbsp_get_max_tx_thres just return the current configured |
| * maximum threshold for transmission |
| */ |
| u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) |
| { |
| struct omap_mcbsp *mcbsp; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| return mcbsp->max_tx_thres; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold); |
| |
| /* |
| * omap_mcbsp_get_max_rx_thres just return the current configured |
| * maximum threshold for reception |
| */ |
| u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) |
| { |
| struct omap_mcbsp *mcbsp; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| return mcbsp->max_rx_thres; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); |
| |
| /* |
| * omap_mcbsp_get_dma_op_mode just return the current configured |
| * operating mode for the mcbsp channel |
| */ |
| int omap_mcbsp_get_dma_op_mode(unsigned int id) |
| { |
| struct omap_mcbsp *mcbsp; |
| int dma_op_mode; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| spin_lock_irq(&mcbsp->lock); |
| dma_op_mode = mcbsp->dma_op_mode; |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return dma_op_mode; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); |
| |
| static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) |
| { |
| /* |
| * Enable wakup behavior, smart idle and all wakeups |
| * REVISIT: some wakeups may be unnecessary |
| */ |
| if (cpu_is_omap34xx()) { |
| u16 syscon; |
| |
| syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); |
| syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); |
| |
| spin_lock_irq(&mcbsp->lock); |
| if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { |
| syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | |
| CLOCKACTIVITY(0x02)); |
| OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, |
| XRDYEN | RRDYEN); |
| } else { |
| syscon |= SIDLEMODE(0x01); |
| } |
| spin_unlock_irq(&mcbsp->lock); |
| |
| OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); |
| } |
| } |
| |
| static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) |
| { |
| /* |
| * Disable wakup behavior, smart idle and all wakeups |
| */ |
| if (cpu_is_omap34xx()) { |
| u16 syscon; |
| |
| syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); |
| syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); |
| /* |
| * HW bug workaround - If no_idle mode is taken, we need to |
| * go to smart_idle before going to always_idle, or the |
| * device will not hit retention anymore. |
| */ |
| syscon |= SIDLEMODE(0x02); |
| OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); |
| |
| syscon &= ~(SIDLEMODE(0x03)); |
| OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); |
| |
| OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0); |
| } |
| } |
| #else |
| static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {} |
| static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {} |
| #endif |
| |
| /* |
| * We can choose between IRQ based or polled IO. |
| * This needs to be called before omap_mcbsp_request(). |
| */ |
| int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) |
| { |
| struct omap_mcbsp *mcbsp; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| spin_lock(&mcbsp->lock); |
| |
| if (!mcbsp->free) { |
| dev_err(mcbsp->dev, "McBSP%d is currently in use\n", |
| mcbsp->id); |
| spin_unlock(&mcbsp->lock); |
| return -EINVAL; |
| } |
| |
| mcbsp->io_type = io_type; |
| |
| spin_unlock(&mcbsp->lock); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_set_io_type); |
| |
| int omap_mcbsp_request(unsigned int id) |
| { |
| struct omap_mcbsp *mcbsp; |
| int err; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| spin_lock(&mcbsp->lock); |
| if (!mcbsp->free) { |
| dev_err(mcbsp->dev, "McBSP%d is currently in use\n", |
| mcbsp->id); |
| spin_unlock(&mcbsp->lock); |
| return -EBUSY; |
| } |
| |
| mcbsp->free = 0; |
| spin_unlock(&mcbsp->lock); |
| |
| if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) |
| mcbsp->pdata->ops->request(id); |
| |
| clk_enable(mcbsp->iclk); |
| clk_enable(mcbsp->fclk); |
| |
| /* Do procedure specific to omap34xx arch, if applicable */ |
| omap34xx_mcbsp_request(mcbsp); |
| |
| /* |
| * Make sure that transmitter, receiver and sample-rate generator are |
| * not running before activating IRQs. |
| */ |
| OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR1, 0); |
| OMAP_MCBSP_WRITE(mcbsp->io_base, SPCR2, 0); |
| |
| if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { |
| /* We need to get IRQs here */ |
| init_completion(&mcbsp->tx_irq_completion); |
| err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, |
| 0, "McBSP", (void *)mcbsp); |
| if (err != 0) { |
| dev_err(mcbsp->dev, "Unable to request TX IRQ %d " |
| "for McBSP%d\n", mcbsp->tx_irq, |
| mcbsp->id); |
| return err; |
| } |
| |
| init_completion(&mcbsp->rx_irq_completion); |
| err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, |
| 0, "McBSP", (void *)mcbsp); |
| if (err != 0) { |
| dev_err(mcbsp->dev, "Unable to request RX IRQ %d " |
| "for McBSP%d\n", mcbsp->rx_irq, |
| mcbsp->id); |
| free_irq(mcbsp->tx_irq, (void *)mcbsp); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_request); |
| |
| void omap_mcbsp_free(unsigned int id) |
| { |
| struct omap_mcbsp *mcbsp; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) |
| mcbsp->pdata->ops->free(id); |
| |
| /* Do procedure specific to omap34xx arch, if applicable */ |
| omap34xx_mcbsp_free(mcbsp); |
| |
| clk_disable(mcbsp->fclk); |
| clk_disable(mcbsp->iclk); |
| |
| if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { |
| /* Free IRQs */ |
| free_irq(mcbsp->rx_irq, (void *)mcbsp); |
| free_irq(mcbsp->tx_irq, (void *)mcbsp); |
| } |
| |
| spin_lock(&mcbsp->lock); |
| if (mcbsp->free) { |
| dev_err(mcbsp->dev, "McBSP%d was not reserved\n", |
| mcbsp->id); |
| spin_unlock(&mcbsp->lock); |
| return; |
| } |
| |
| mcbsp->free = 1; |
| spin_unlock(&mcbsp->lock); |
| } |
| EXPORT_SYMBOL(omap_mcbsp_free); |
| |
| /* |
| * Here we start the McBSP, by enabling transmitter, receiver or both. |
| * If no transmitter or receiver is active prior calling, then sample-rate |
| * generator and frame sync are started. |
| */ |
| void omap_mcbsp_start(unsigned int id, int tx, int rx) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| int idle; |
| u16 w; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| io_base = mcbsp->io_base; |
| |
| mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; |
| mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; |
| |
| idle = !((OMAP_MCBSP_READ(io_base, SPCR2) | |
| OMAP_MCBSP_READ(io_base, SPCR1)) & 1); |
| |
| if (idle) { |
| /* Start the sample generator */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6)); |
| } |
| |
| /* Enable transmitter and receiver */ |
| tx &= 1; |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx); |
| |
| rx &= 1; |
| w = OMAP_MCBSP_READ(io_base, SPCR1); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx); |
| |
| /* |
| * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec |
| * REVISIT: 100us may give enough time for two CLKSRG, however |
| * due to some unknown PM related, clock gating etc. reason it |
| * is now at 500us. |
| */ |
| udelay(500); |
| |
| if (idle) { |
| /* Start frame sync */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); |
| } |
| |
| if (cpu_is_omap2430() || cpu_is_omap34xx()) { |
| /* Release the transmitter and receiver */ |
| w = OMAP_MCBSP_READ(io_base, XCCR); |
| w &= ~(tx ? XDISABLE : 0); |
| OMAP_MCBSP_WRITE(io_base, XCCR, w); |
| w = OMAP_MCBSP_READ(io_base, RCCR); |
| w &= ~(rx ? RDISABLE : 0); |
| OMAP_MCBSP_WRITE(io_base, RCCR, w); |
| } |
| |
| /* Dump McBSP Regs */ |
| omap_mcbsp_dump_reg(id); |
| } |
| EXPORT_SYMBOL(omap_mcbsp_start); |
| |
| void omap_mcbsp_stop(unsigned int id, int tx, int rx) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| int idle; |
| u16 w; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| |
| mcbsp = id_to_mcbsp_ptr(id); |
| io_base = mcbsp->io_base; |
| |
| /* Reset transmitter */ |
| tx &= 1; |
| if (cpu_is_omap2430() || cpu_is_omap34xx()) { |
| w = OMAP_MCBSP_READ(io_base, XCCR); |
| w |= (tx ? XDISABLE : 0); |
| OMAP_MCBSP_WRITE(io_base, XCCR, w); |
| } |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx); |
| |
| /* Reset receiver */ |
| rx &= 1; |
| if (cpu_is_omap2430() || cpu_is_omap34xx()) { |
| w = OMAP_MCBSP_READ(io_base, RCCR); |
| w |= (tx ? RDISABLE : 0); |
| OMAP_MCBSP_WRITE(io_base, RCCR, w); |
| } |
| w = OMAP_MCBSP_READ(io_base, SPCR1); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx); |
| |
| idle = !((OMAP_MCBSP_READ(io_base, SPCR2) | |
| OMAP_MCBSP_READ(io_base, SPCR1)) & 1); |
| |
| if (idle) { |
| /* Reset the sample rate generator */ |
| w = OMAP_MCBSP_READ(io_base, SPCR2); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6)); |
| } |
| } |
| EXPORT_SYMBOL(omap_mcbsp_stop); |
| |
| /* polled mcbsp i/o operations */ |
| int omap_mcbsp_pollwrite(unsigned int id, u16 buf) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *base; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| |
| mcbsp = id_to_mcbsp_ptr(id); |
| base = mcbsp->io_base; |
| |
| writew(buf, base + OMAP_MCBSP_REG_DXR1); |
| /* if frame sync error - clear the error */ |
| if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { |
| /* clear error */ |
| writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR), |
| base + OMAP_MCBSP_REG_SPCR2); |
| /* resend */ |
| return -1; |
| } else { |
| /* wait for transmit confirmation */ |
| int attemps = 0; |
| while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) { |
| if (attemps++ > 1000) { |
| writew(readw(base + OMAP_MCBSP_REG_SPCR2) & |
| (~XRST), |
| base + OMAP_MCBSP_REG_SPCR2); |
| udelay(10); |
| writew(readw(base + OMAP_MCBSP_REG_SPCR2) | |
| (XRST), |
| base + OMAP_MCBSP_REG_SPCR2); |
| udelay(10); |
| dev_err(mcbsp->dev, "Could not write to" |
| " McBSP%d Register\n", mcbsp->id); |
| return -2; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_pollwrite); |
| |
| int omap_mcbsp_pollread(unsigned int id, u16 *buf) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *base; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| base = mcbsp->io_base; |
| /* if frame sync error - clear the error */ |
| if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { |
| /* clear error */ |
| writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR), |
| base + OMAP_MCBSP_REG_SPCR1); |
| /* resend */ |
| return -1; |
| } else { |
| /* wait for recieve confirmation */ |
| int attemps = 0; |
| while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) { |
| if (attemps++ > 1000) { |
| writew(readw(base + OMAP_MCBSP_REG_SPCR1) & |
| (~RRST), |
| base + OMAP_MCBSP_REG_SPCR1); |
| udelay(10); |
| writew(readw(base + OMAP_MCBSP_REG_SPCR1) | |
| (RRST), |
| base + OMAP_MCBSP_REG_SPCR1); |
| udelay(10); |
| dev_err(mcbsp->dev, "Could not read from" |
| " McBSP%d Register\n", mcbsp->id); |
| return -2; |
| } |
| } |
| } |
| *buf = readw(base + OMAP_MCBSP_REG_DRR1); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_pollread); |
| |
| /* |
| * IRQ based word transmission. |
| */ |
| void omap_mcbsp_xmit_word(unsigned int id, u32 word) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| omap_mcbsp_word_length word_length; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| |
| mcbsp = id_to_mcbsp_ptr(id); |
| io_base = mcbsp->io_base; |
| word_length = mcbsp->tx_word_length; |
| |
| wait_for_completion(&mcbsp->tx_irq_completion); |
| |
| if (word_length > OMAP_MCBSP_WORD_16) |
| OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); |
| OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff); |
| } |
| EXPORT_SYMBOL(omap_mcbsp_xmit_word); |
| |
| u32 omap_mcbsp_recv_word(unsigned int id) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| u16 word_lsb, word_msb = 0; |
| omap_mcbsp_word_length word_length; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| word_length = mcbsp->rx_word_length; |
| io_base = mcbsp->io_base; |
| |
| wait_for_completion(&mcbsp->rx_irq_completion); |
| |
| if (word_length > OMAP_MCBSP_WORD_16) |
| word_msb = OMAP_MCBSP_READ(io_base, DRR2); |
| word_lsb = OMAP_MCBSP_READ(io_base, DRR1); |
| |
| return (word_lsb | (word_msb << 16)); |
| } |
| EXPORT_SYMBOL(omap_mcbsp_recv_word); |
| |
| int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) |
| { |
| struct omap_mcbsp *mcbsp; |
| void __iomem *io_base; |
| omap_mcbsp_word_length tx_word_length; |
| omap_mcbsp_word_length rx_word_length; |
| u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| io_base = mcbsp->io_base; |
| tx_word_length = mcbsp->tx_word_length; |
| rx_word_length = mcbsp->rx_word_length; |
| |
| if (tx_word_length != rx_word_length) |
| return -EINVAL; |
| |
| /* First we wait for the transmitter to be ready */ |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| while (!(spcr2 & XRDY)) { |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| if (attempts++ > 1000) { |
| /* We must reset the transmitter */ |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); |
| udelay(10); |
| dev_err(mcbsp->dev, "McBSP%d transmitter not " |
| "ready\n", mcbsp->id); |
| return -EAGAIN; |
| } |
| } |
| |
| /* Now we can push the data */ |
| if (tx_word_length > OMAP_MCBSP_WORD_16) |
| OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); |
| OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff); |
| |
| /* We wait for the receiver to be ready */ |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| while (!(spcr1 & RRDY)) { |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| if (attempts++ > 1000) { |
| /* We must reset the receiver */ |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); |
| udelay(10); |
| dev_err(mcbsp->dev, "McBSP%d receiver not " |
| "ready\n", mcbsp->id); |
| return -EAGAIN; |
| } |
| } |
| |
| /* Receiver is ready, let's read the dummy data */ |
| if (rx_word_length > OMAP_MCBSP_WORD_16) |
| word_msb = OMAP_MCBSP_READ(io_base, DRR2); |
| word_lsb = OMAP_MCBSP_READ(io_base, DRR1); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); |
| |
| int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) |
| { |
| struct omap_mcbsp *mcbsp; |
| u32 clock_word = 0; |
| void __iomem *io_base; |
| omap_mcbsp_word_length tx_word_length; |
| omap_mcbsp_word_length rx_word_length; |
| u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| |
| mcbsp = id_to_mcbsp_ptr(id); |
| io_base = mcbsp->io_base; |
| |
| tx_word_length = mcbsp->tx_word_length; |
| rx_word_length = mcbsp->rx_word_length; |
| |
| if (tx_word_length != rx_word_length) |
| return -EINVAL; |
| |
| /* First we wait for the transmitter to be ready */ |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| while (!(spcr2 & XRDY)) { |
| spcr2 = OMAP_MCBSP_READ(io_base, SPCR2); |
| if (attempts++ > 1000) { |
| /* We must reset the transmitter */ |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 & (~XRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR2, spcr2 | XRST); |
| udelay(10); |
| dev_err(mcbsp->dev, "McBSP%d transmitter not " |
| "ready\n", mcbsp->id); |
| return -EAGAIN; |
| } |
| } |
| |
| /* We first need to enable the bus clock */ |
| if (tx_word_length > OMAP_MCBSP_WORD_16) |
| OMAP_MCBSP_WRITE(io_base, DXR2, clock_word >> 16); |
| OMAP_MCBSP_WRITE(io_base, DXR1, clock_word & 0xffff); |
| |
| /* We wait for the receiver to be ready */ |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| while (!(spcr1 & RRDY)) { |
| spcr1 = OMAP_MCBSP_READ(io_base, SPCR1); |
| if (attempts++ > 1000) { |
| /* We must reset the receiver */ |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 & (~RRST)); |
| udelay(10); |
| OMAP_MCBSP_WRITE(io_base, SPCR1, spcr1 | RRST); |
| udelay(10); |
| dev_err(mcbsp->dev, "McBSP%d receiver not " |
| "ready\n", mcbsp->id); |
| return -EAGAIN; |
| } |
| } |
| |
| /* Receiver is ready, there is something for us */ |
| if (rx_word_length > OMAP_MCBSP_WORD_16) |
| word_msb = OMAP_MCBSP_READ(io_base, DRR2); |
| word_lsb = OMAP_MCBSP_READ(io_base, DRR1); |
| |
| word[0] = (word_lsb | (word_msb << 16)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); |
| |
| /* |
| * Simple DMA based buffer rx/tx routines. |
| * Nothing fancy, just a single buffer tx/rx through DMA. |
| * The DMA resources are released once the transfer is done. |
| * For anything fancier, you should use your own customized DMA |
| * routines and callbacks. |
| */ |
| int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, |
| unsigned int length) |
| { |
| struct omap_mcbsp *mcbsp; |
| int dma_tx_ch; |
| int src_port = 0; |
| int dest_port = 0; |
| int sync_dev = 0; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX", |
| omap_mcbsp_tx_dma_callback, |
| mcbsp, |
| &dma_tx_ch)) { |
| dev_err(mcbsp->dev, " Unable to request DMA channel for " |
| "McBSP%d TX. Trying IRQ based TX\n", |
| mcbsp->id); |
| return -EAGAIN; |
| } |
| mcbsp->dma_tx_lch = dma_tx_ch; |
| |
| dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id, |
| dma_tx_ch); |
| |
| init_completion(&mcbsp->tx_dma_completion); |
| |
| if (cpu_class_is_omap1()) { |
| src_port = OMAP_DMA_PORT_TIPB; |
| dest_port = OMAP_DMA_PORT_EMIFF; |
| } |
| if (cpu_class_is_omap2()) |
| sync_dev = mcbsp->dma_tx_sync; |
| |
| omap_set_dma_transfer_params(mcbsp->dma_tx_lch, |
| OMAP_DMA_DATA_TYPE_S16, |
| length >> 1, 1, |
| OMAP_DMA_SYNC_ELEMENT, |
| sync_dev, 0); |
| |
| omap_set_dma_dest_params(mcbsp->dma_tx_lch, |
| src_port, |
| OMAP_DMA_AMODE_CONSTANT, |
| mcbsp->phys_base + OMAP_MCBSP_REG_DXR1, |
| 0, 0); |
| |
| omap_set_dma_src_params(mcbsp->dma_tx_lch, |
| dest_port, |
| OMAP_DMA_AMODE_POST_INC, |
| buffer, |
| 0, 0); |
| |
| omap_start_dma(mcbsp->dma_tx_lch); |
| wait_for_completion(&mcbsp->tx_dma_completion); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); |
| |
| int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, |
| unsigned int length) |
| { |
| struct omap_mcbsp *mcbsp; |
| int dma_rx_ch; |
| int src_port = 0; |
| int dest_port = 0; |
| int sync_dev = 0; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return -ENODEV; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX", |
| omap_mcbsp_rx_dma_callback, |
| mcbsp, |
| &dma_rx_ch)) { |
| dev_err(mcbsp->dev, "Unable to request DMA channel for " |
| "McBSP%d RX. Trying IRQ based RX\n", |
| mcbsp->id); |
| return -EAGAIN; |
| } |
| mcbsp->dma_rx_lch = dma_rx_ch; |
| |
| dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id, |
| dma_rx_ch); |
| |
| init_completion(&mcbsp->rx_dma_completion); |
| |
| if (cpu_class_is_omap1()) { |
| src_port = OMAP_DMA_PORT_TIPB; |
| dest_port = OMAP_DMA_PORT_EMIFF; |
| } |
| if (cpu_class_is_omap2()) |
| sync_dev = mcbsp->dma_rx_sync; |
| |
| omap_set_dma_transfer_params(mcbsp->dma_rx_lch, |
| OMAP_DMA_DATA_TYPE_S16, |
| length >> 1, 1, |
| OMAP_DMA_SYNC_ELEMENT, |
| sync_dev, 0); |
| |
| omap_set_dma_src_params(mcbsp->dma_rx_lch, |
| src_port, |
| OMAP_DMA_AMODE_CONSTANT, |
| mcbsp->phys_base + OMAP_MCBSP_REG_DRR1, |
| 0, 0); |
| |
| omap_set_dma_dest_params(mcbsp->dma_rx_lch, |
| dest_port, |
| OMAP_DMA_AMODE_POST_INC, |
| buffer, |
| 0, 0); |
| |
| omap_start_dma(mcbsp->dma_rx_lch); |
| wait_for_completion(&mcbsp->rx_dma_completion); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_mcbsp_recv_buffer); |
| |
| /* |
| * SPI wrapper. |
| * Since SPI setup is much simpler than the generic McBSP one, |
| * this wrapper just need an omap_mcbsp_spi_cfg structure as an input. |
| * Once this is done, you can call omap_mcbsp_start(). |
| */ |
| void omap_mcbsp_set_spi_mode(unsigned int id, |
| const struct omap_mcbsp_spi_cfg *spi_cfg) |
| { |
| struct omap_mcbsp *mcbsp; |
| struct omap_mcbsp_reg_cfg mcbsp_cfg; |
| |
| if (!omap_mcbsp_check_valid_id(id)) { |
| printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); |
| return; |
| } |
| mcbsp = id_to_mcbsp_ptr(id); |
| |
| memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); |
| |
| /* SPI has only one frame */ |
| mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0)); |
| mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0)); |
| |
| /* Clock stop mode */ |
| if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY) |
| mcbsp_cfg.spcr1 |= (1 << 12); |
| else |
| mcbsp_cfg.spcr1 |= (3 << 11); |
| |
| /* Set clock parities */ |
| if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING) |
| mcbsp_cfg.pcr0 |= CLKRP; |
| else |
| mcbsp_cfg.pcr0 &= ~CLKRP; |
| |
| if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING) |
| mcbsp_cfg.pcr0 &= ~CLKXP; |
| else |
| mcbsp_cfg.pcr0 |= CLKXP; |
| |
| /* Set SCLKME to 0 and CLKSM to 1 */ |
| mcbsp_cfg.pcr0 &= ~SCLKME; |
| mcbsp_cfg.srgr2 |= CLKSM; |
| |
| /* Set FSXP */ |
| if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH) |
| mcbsp_cfg.pcr0 &= ~FSXP; |
| else |
| mcbsp_cfg.pcr0 |= FSXP; |
| |
| if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) { |
| mcbsp_cfg.pcr0 |= CLKXM; |
| mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1); |
| mcbsp_cfg.pcr0 |= FSXM; |
| mcbsp_cfg.srgr2 &= ~FSGM; |
| mcbsp_cfg.xcr2 |= XDATDLY(1); |
| mcbsp_cfg.rcr2 |= RDATDLY(1); |
| } else { |
| mcbsp_cfg.pcr0 &= ~CLKXM; |
| mcbsp_cfg.srgr1 |= CLKGDV(1); |
| mcbsp_cfg.pcr0 &= ~FSXM; |
| mcbsp_cfg.xcr2 &= ~XDATDLY(3); |
| mcbsp_cfg.rcr2 &= ~RDATDLY(3); |
| } |
| |
| mcbsp_cfg.xcr2 &= ~XPHASE; |
| mcbsp_cfg.rcr2 &= ~RPHASE; |
| |
| omap_mcbsp_config(id, &mcbsp_cfg); |
| } |
| EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); |
| |
| #ifdef CONFIG_ARCH_OMAP34XX |
| #define max_thres(m) (mcbsp->pdata->buffer_size) |
| #define valid_threshold(m, val) ((val) <= max_thres(m)) |
| #define THRESHOLD_PROP_BUILDER(prop) \ |
| static ssize_t prop##_show(struct device *dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ |
| \ |
| return sprintf(buf, "%u\n", mcbsp->prop); \ |
| } \ |
| \ |
| static ssize_t prop##_store(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t size) \ |
| { \ |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ |
| unsigned long val; \ |
| int status; \ |
| \ |
| status = strict_strtoul(buf, 0, &val); \ |
| if (status) \ |
| return status; \ |
| \ |
| if (!valid_threshold(mcbsp, val)) \ |
| return -EDOM; \ |
| \ |
| mcbsp->prop = val; \ |
| return size; \ |
| } \ |
| \ |
| static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); |
| |
| THRESHOLD_PROP_BUILDER(max_tx_thres); |
| THRESHOLD_PROP_BUILDER(max_rx_thres); |
| |
| static const char *dma_op_modes[] = { |
| "element", "threshold", "frame", |
| }; |
| |
| static ssize_t dma_op_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); |
| int dma_op_mode, i = 0; |
| ssize_t len = 0; |
| const char * const *s; |
| |
| spin_lock_irq(&mcbsp->lock); |
| dma_op_mode = mcbsp->dma_op_mode; |
| spin_unlock_irq(&mcbsp->lock); |
| |
| for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { |
| if (dma_op_mode == i) |
| len += sprintf(buf + len, "[%s] ", *s); |
| else |
| len += sprintf(buf + len, "%s ", *s); |
| } |
| len += sprintf(buf + len, "\n"); |
| |
| return len; |
| } |
| |
| static ssize_t dma_op_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); |
| const char * const *s; |
| int i = 0; |
| |
| for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) |
| if (sysfs_streq(buf, *s)) |
| break; |
| |
| if (i == ARRAY_SIZE(dma_op_modes)) |
| return -EINVAL; |
| |
| spin_lock_irq(&mcbsp->lock); |
| if (!mcbsp->free) { |
| size = -EBUSY; |
| goto unlock; |
| } |
| mcbsp->dma_op_mode = i; |
| |
| unlock: |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return size; |
| } |
| |
| static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); |
| |
| static const struct attribute *additional_attrs[] = { |
| &dev_attr_max_tx_thres.attr, |
| &dev_attr_max_rx_thres.attr, |
| &dev_attr_dma_op_mode.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group additional_attr_group = { |
| .attrs = (struct attribute **)additional_attrs, |
| }; |
| |
| static inline int __devinit omap_additional_add(struct device *dev) |
| { |
| return sysfs_create_group(&dev->kobj, &additional_attr_group); |
| } |
| |
| static inline void __devexit omap_additional_remove(struct device *dev) |
| { |
| sysfs_remove_group(&dev->kobj, &additional_attr_group); |
| } |
| |
| static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) |
| { |
| mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; |
| if (cpu_is_omap34xx()) { |
| mcbsp->max_tx_thres = max_thres(mcbsp); |
| mcbsp->max_rx_thres = max_thres(mcbsp); |
| /* |
| * REVISIT: Set dmap_op_mode to THRESHOLD as default |
| * for mcbsp2 instances. |
| */ |
| if (omap_additional_add(mcbsp->dev)) |
| dev_warn(mcbsp->dev, |
| "Unable to create additional controls\n"); |
| } else { |
| mcbsp->max_tx_thres = -EINVAL; |
| mcbsp->max_rx_thres = -EINVAL; |
| } |
| } |
| |
| static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) |
| { |
| if (cpu_is_omap34xx()) |
| omap_additional_remove(mcbsp->dev); |
| } |
| #else |
| static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {} |
| static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {} |
| #endif /* CONFIG_ARCH_OMAP34XX */ |
| |
| /* |
| * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. |
| * 730 has only 2 McBSP, and both of them are MPU peripherals. |
| */ |
| static int __devinit omap_mcbsp_probe(struct platform_device *pdev) |
| { |
| struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; |
| struct omap_mcbsp *mcbsp; |
| int id = pdev->id - 1; |
| int ret = 0; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "McBSP device initialized without" |
| "platform data\n"); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id); |
| |
| if (id >= omap_mcbsp_count) { |
| dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id); |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL); |
| if (!mcbsp) { |
| ret = -ENOMEM; |
| goto exit; |
| } |
| |
| spin_lock_init(&mcbsp->lock); |
| mcbsp->id = id + 1; |
| mcbsp->free = 1; |
| mcbsp->dma_tx_lch = -1; |
| mcbsp->dma_rx_lch = -1; |
| |
| mcbsp->phys_base = pdata->phys_base; |
| mcbsp->io_base = ioremap(pdata->phys_base, SZ_4K); |
| if (!mcbsp->io_base) { |
| ret = -ENOMEM; |
| goto err_ioremap; |
| } |
| |
| /* Default I/O is IRQ based */ |
| mcbsp->io_type = OMAP_MCBSP_IRQ_IO; |
| mcbsp->tx_irq = pdata->tx_irq; |
| mcbsp->rx_irq = pdata->rx_irq; |
| mcbsp->dma_rx_sync = pdata->dma_rx_sync; |
| mcbsp->dma_tx_sync = pdata->dma_tx_sync; |
| |
| mcbsp->iclk = clk_get(&pdev->dev, "ick"); |
| if (IS_ERR(mcbsp->iclk)) { |
| ret = PTR_ERR(mcbsp->iclk); |
| dev_err(&pdev->dev, "unable to get ick: %d\n", ret); |
| goto err_iclk; |
| } |
| |
| mcbsp->fclk = clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(mcbsp->fclk)) { |
| ret = PTR_ERR(mcbsp->fclk); |
| dev_err(&pdev->dev, "unable to get fck: %d\n", ret); |
| goto err_fclk; |
| } |
| |
| mcbsp->pdata = pdata; |
| mcbsp->dev = &pdev->dev; |
| mcbsp_ptr[id] = mcbsp; |
| platform_set_drvdata(pdev, mcbsp); |
| |
| /* Initialize mcbsp properties for OMAP34XX if needed / applicable */ |
| omap34xx_device_init(mcbsp); |
| |
| return 0; |
| |
| err_fclk: |
| clk_put(mcbsp->iclk); |
| err_iclk: |
| iounmap(mcbsp->io_base); |
| err_ioremap: |
| kfree(mcbsp); |
| exit: |
| return ret; |
| } |
| |
| static int __devexit omap_mcbsp_remove(struct platform_device *pdev) |
| { |
| struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); |
| |
| platform_set_drvdata(pdev, NULL); |
| if (mcbsp) { |
| |
| if (mcbsp->pdata && mcbsp->pdata->ops && |
| mcbsp->pdata->ops->free) |
| mcbsp->pdata->ops->free(mcbsp->id); |
| |
| omap34xx_device_exit(mcbsp); |
| |
| clk_disable(mcbsp->fclk); |
| clk_disable(mcbsp->iclk); |
| clk_put(mcbsp->fclk); |
| clk_put(mcbsp->iclk); |
| |
| iounmap(mcbsp->io_base); |
| |
| mcbsp->fclk = NULL; |
| mcbsp->iclk = NULL; |
| mcbsp->free = 0; |
| mcbsp->dev = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver omap_mcbsp_driver = { |
| .probe = omap_mcbsp_probe, |
| .remove = __devexit_p(omap_mcbsp_remove), |
| .driver = { |
| .name = "omap-mcbsp", |
| }, |
| }; |
| |
| int __init omap_mcbsp_init(void) |
| { |
| /* Register the McBSP driver */ |
| return platform_driver_register(&omap_mcbsp_driver); |
| } |