| /* |
| * include/asm-arm/arch-ixp4xx/platform.h |
| * |
| * Constants and functions that are useful to IXP4xx platform-specific code |
| * and device drivers. |
| * |
| * Copyright (C) 2004 MontaVista Software, Inc. |
| */ |
| |
| #ifndef __ASM_ARCH_HARDWARE_H__ |
| #error "Do not include this directly, instead #include <asm/hardware.h>" |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <asm/types.h> |
| |
| #ifndef __ARMEB__ |
| #define REG_OFFSET 0 |
| #else |
| #define REG_OFFSET 3 |
| #endif |
| |
| /* |
| * Expansion bus memory regions |
| */ |
| #define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) |
| |
| #define IXP4XX_EXP_BUS_CSX_REGION_SIZE (0x01000000) |
| |
| #define IXP4XX_EXP_BUS_CS0_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000) |
| #define IXP4XX_EXP_BUS_CS1_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000) |
| #define IXP4XX_EXP_BUS_CS2_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000) |
| #define IXP4XX_EXP_BUS_CS3_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000) |
| #define IXP4XX_EXP_BUS_CS4_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000) |
| #define IXP4XX_EXP_BUS_CS5_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000) |
| #define IXP4XX_EXP_BUS_CS6_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000) |
| #define IXP4XX_EXP_BUS_CS7_BASE_PHYS (IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000) |
| |
| #define IXP4XX_FLASH_WRITABLE (0x2) |
| #define IXP4XX_FLASH_DEFAULT (0xbcd23c40) |
| #define IXP4XX_FLASH_WRITE (0xbcd23c42) |
| |
| /* |
| * Clock Speed Definitions. |
| */ |
| #define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ |
| #define IXP4XX_UART_XTAL 14745600 |
| |
| /* |
| * The IXP4xx chips do not have an I2C unit, so GPIO lines are just |
| * used to |
| * Used as platform_data to provide GPIO pin information to the ixp42x |
| * I2C driver. |
| */ |
| struct ixp4xx_i2c_pins { |
| unsigned long sda_pin; |
| unsigned long scl_pin; |
| }; |
| |
| |
| struct sys_timer; |
| |
| /* |
| * Functions used by platform-level setup code |
| */ |
| extern void ixp4xx_map_io(void); |
| extern void ixp4xx_init_irq(void); |
| extern void ixp4xx_sys_init(void); |
| extern struct sys_timer ixp4xx_timer; |
| extern void ixp4xx_pci_preinit(void); |
| struct pci_sys_data; |
| extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); |
| extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); |
| |
| /* |
| * GPIO-functions |
| */ |
| /* |
| * The following converted to the real HW bits the gpio_line_config |
| */ |
| /* GPIO pin types */ |
| #define IXP4XX_GPIO_OUT 0x1 |
| #define IXP4XX_GPIO_IN 0x2 |
| |
| /* GPIO signal types */ |
| #define IXP4XX_GPIO_LOW 0 |
| #define IXP4XX_GPIO_HIGH 1 |
| |
| /* GPIO Clocks */ |
| #define IXP4XX_GPIO_CLK_0 14 |
| #define IXP4XX_GPIO_CLK_1 15 |
| |
| static inline void gpio_line_config(u8 line, u32 direction) |
| { |
| if (direction == IXP4XX_GPIO_OUT) |
| *IXP4XX_GPIO_GPOER |= (1 << line); |
| else |
| *IXP4XX_GPIO_GPOER &= ~(1 << line); |
| } |
| |
| static inline void gpio_line_get(u8 line, int *value) |
| { |
| *value = (*IXP4XX_GPIO_GPINR >> line) & 0x1; |
| } |
| |
| static inline void gpio_line_set(u8 line, int value) |
| { |
| if (value == IXP4XX_GPIO_HIGH) |
| *IXP4XX_GPIO_GPOUTR |= (1 << line); |
| else if (value == IXP4XX_GPIO_LOW) |
| *IXP4XX_GPIO_GPOUTR &= ~(1 << line); |
| } |
| |
| static inline void gpio_line_isr_clear(u8 line) |
| { |
| *IXP4XX_GPIO_GPISR = (1 << line); |
| } |
| |
| #endif // __ASSEMBLY__ |
| |