| /****************************************************************************** |
| * QLOGIC LINUX SOFTWARE |
| * |
| * QLogic ISP2x00 device driver for Linux 2.6.x |
| * Copyright (C) 2003-2005 QLogic Corporation |
| * (www.qlogic.com) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| ******************************************************************************/ |
| |
| #include "qla_def.h" |
| |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| |
| #include <scsi/scsi_tcq.h> |
| |
| static inline uint16_t qla2x00_get_cmd_direction(struct scsi_cmnd *cmd); |
| static inline cont_entry_t *qla2x00_prep_cont_type0_iocb(scsi_qla_host_t *); |
| static inline cont_a64_entry_t *qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *); |
| static request_t *qla2x00_req_pkt(scsi_qla_host_t *ha); |
| |
| /** |
| * qla2x00_get_cmd_direction() - Determine control_flag data direction. |
| * @cmd: SCSI command |
| * |
| * Returns the proper CF_* direction based on CDB. |
| */ |
| static inline uint16_t |
| qla2x00_get_cmd_direction(struct scsi_cmnd *cmd) |
| { |
| uint16_t cflags; |
| |
| cflags = 0; |
| |
| /* Set transfer direction */ |
| if (cmd->sc_data_direction == DMA_TO_DEVICE) |
| cflags = CF_WRITE; |
| else if (cmd->sc_data_direction == DMA_FROM_DEVICE) |
| cflags = CF_READ; |
| return (cflags); |
| } |
| |
| /** |
| * qla2x00_calc_iocbs_32() - Determine number of Command Type 2 and |
| * Continuation Type 0 IOCBs to allocate. |
| * |
| * @dsds: number of data segment decriptors needed |
| * |
| * Returns the number of IOCB entries needed to store @dsds. |
| */ |
| uint16_t |
| qla2x00_calc_iocbs_32(uint16_t dsds) |
| { |
| uint16_t iocbs; |
| |
| iocbs = 1; |
| if (dsds > 3) { |
| iocbs += (dsds - 3) / 7; |
| if ((dsds - 3) % 7) |
| iocbs++; |
| } |
| return (iocbs); |
| } |
| |
| /** |
| * qla2x00_calc_iocbs_64() - Determine number of Command Type 3 and |
| * Continuation Type 1 IOCBs to allocate. |
| * |
| * @dsds: number of data segment decriptors needed |
| * |
| * Returns the number of IOCB entries needed to store @dsds. |
| */ |
| uint16_t |
| qla2x00_calc_iocbs_64(uint16_t dsds) |
| { |
| uint16_t iocbs; |
| |
| iocbs = 1; |
| if (dsds > 2) { |
| iocbs += (dsds - 2) / 5; |
| if ((dsds - 2) % 5) |
| iocbs++; |
| } |
| return (iocbs); |
| } |
| |
| /** |
| * qla2x00_prep_cont_type0_iocb() - Initialize a Continuation Type 0 IOCB. |
| * @ha: HA context |
| * |
| * Returns a pointer to the Continuation Type 0 IOCB packet. |
| */ |
| static inline cont_entry_t * |
| qla2x00_prep_cont_type0_iocb(scsi_qla_host_t *ha) |
| { |
| cont_entry_t *cont_pkt; |
| |
| /* Adjust ring index. */ |
| ha->req_ring_index++; |
| if (ha->req_ring_index == ha->request_q_length) { |
| ha->req_ring_index = 0; |
| ha->request_ring_ptr = ha->request_ring; |
| } else { |
| ha->request_ring_ptr++; |
| } |
| |
| cont_pkt = (cont_entry_t *)ha->request_ring_ptr; |
| |
| /* Load packet defaults. */ |
| *((uint32_t *)(&cont_pkt->entry_type)) = |
| __constant_cpu_to_le32(CONTINUE_TYPE); |
| |
| return (cont_pkt); |
| } |
| |
| /** |
| * qla2x00_prep_cont_type1_iocb() - Initialize a Continuation Type 1 IOCB. |
| * @ha: HA context |
| * |
| * Returns a pointer to the continuation type 1 IOCB packet. |
| */ |
| static inline cont_a64_entry_t * |
| qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *ha) |
| { |
| cont_a64_entry_t *cont_pkt; |
| |
| /* Adjust ring index. */ |
| ha->req_ring_index++; |
| if (ha->req_ring_index == ha->request_q_length) { |
| ha->req_ring_index = 0; |
| ha->request_ring_ptr = ha->request_ring; |
| } else { |
| ha->request_ring_ptr++; |
| } |
| |
| cont_pkt = (cont_a64_entry_t *)ha->request_ring_ptr; |
| |
| /* Load packet defaults. */ |
| *((uint32_t *)(&cont_pkt->entry_type)) = |
| __constant_cpu_to_le32(CONTINUE_A64_TYPE); |
| |
| return (cont_pkt); |
| } |
| |
| /** |
| * qla2x00_build_scsi_iocbs_32() - Build IOCB command utilizing 32bit |
| * capable IOCB types. |
| * |
| * @sp: SRB command to process |
| * @cmd_pkt: Command type 2 IOCB |
| * @tot_dsds: Total number of segments to transfer |
| */ |
| void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt, |
| uint16_t tot_dsds) |
| { |
| uint16_t avail_dsds; |
| uint32_t *cur_dsd; |
| scsi_qla_host_t *ha; |
| struct scsi_cmnd *cmd; |
| |
| cmd = sp->cmd; |
| |
| /* Update entry type to indicate Command Type 2 IOCB */ |
| *((uint32_t *)(&cmd_pkt->entry_type)) = |
| __constant_cpu_to_le32(COMMAND_TYPE); |
| |
| /* No data transfer */ |
| if (cmd->request_bufflen == 0 || cmd->sc_data_direction == DMA_NONE) { |
| cmd_pkt->byte_count = __constant_cpu_to_le32(0); |
| return; |
| } |
| |
| ha = sp->ha; |
| |
| cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd)); |
| |
| /* Three DSDs are available in the Command Type 2 IOCB */ |
| avail_dsds = 3; |
| cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address; |
| |
| /* Load data segments */ |
| if (cmd->use_sg != 0) { |
| struct scatterlist *cur_seg; |
| struct scatterlist *end_seg; |
| |
| cur_seg = (struct scatterlist *)cmd->request_buffer; |
| end_seg = cur_seg + tot_dsds; |
| while (cur_seg < end_seg) { |
| cont_entry_t *cont_pkt; |
| |
| /* Allocate additional continuation packets? */ |
| if (avail_dsds == 0) { |
| /* |
| * Seven DSDs are available in the Continuation |
| * Type 0 IOCB. |
| */ |
| cont_pkt = qla2x00_prep_cont_type0_iocb(ha); |
| cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address; |
| avail_dsds = 7; |
| } |
| |
| *cur_dsd++ = cpu_to_le32(sg_dma_address(cur_seg)); |
| *cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg)); |
| avail_dsds--; |
| |
| cur_seg++; |
| } |
| } else { |
| *cur_dsd++ = cpu_to_le32(sp->dma_handle); |
| *cur_dsd++ = cpu_to_le32(cmd->request_bufflen); |
| } |
| } |
| |
| /** |
| * qla2x00_build_scsi_iocbs_64() - Build IOCB command utilizing 64bit |
| * capable IOCB types. |
| * |
| * @sp: SRB command to process |
| * @cmd_pkt: Command type 3 IOCB |
| * @tot_dsds: Total number of segments to transfer |
| */ |
| void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt, |
| uint16_t tot_dsds) |
| { |
| uint16_t avail_dsds; |
| uint32_t *cur_dsd; |
| scsi_qla_host_t *ha; |
| struct scsi_cmnd *cmd; |
| |
| cmd = sp->cmd; |
| |
| /* Update entry type to indicate Command Type 3 IOCB */ |
| *((uint32_t *)(&cmd_pkt->entry_type)) = |
| __constant_cpu_to_le32(COMMAND_A64_TYPE); |
| |
| /* No data transfer */ |
| if (cmd->request_bufflen == 0 || cmd->sc_data_direction == DMA_NONE) { |
| cmd_pkt->byte_count = __constant_cpu_to_le32(0); |
| return; |
| } |
| |
| ha = sp->ha; |
| |
| cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(cmd)); |
| |
| /* Two DSDs are available in the Command Type 3 IOCB */ |
| avail_dsds = 2; |
| cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address; |
| |
| /* Load data segments */ |
| if (cmd->use_sg != 0) { |
| struct scatterlist *cur_seg; |
| struct scatterlist *end_seg; |
| |
| cur_seg = (struct scatterlist *)cmd->request_buffer; |
| end_seg = cur_seg + tot_dsds; |
| while (cur_seg < end_seg) { |
| dma_addr_t sle_dma; |
| cont_a64_entry_t *cont_pkt; |
| |
| /* Allocate additional continuation packets? */ |
| if (avail_dsds == 0) { |
| /* |
| * Five DSDs are available in the Continuation |
| * Type 1 IOCB. |
| */ |
| cont_pkt = qla2x00_prep_cont_type1_iocb(ha); |
| cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; |
| avail_dsds = 5; |
| } |
| |
| sle_dma = sg_dma_address(cur_seg); |
| *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg)); |
| avail_dsds--; |
| |
| cur_seg++; |
| } |
| } else { |
| *cur_dsd++ = cpu_to_le32(LSD(sp->dma_handle)); |
| *cur_dsd++ = cpu_to_le32(MSD(sp->dma_handle)); |
| *cur_dsd++ = cpu_to_le32(cmd->request_bufflen); |
| } |
| } |
| |
| /** |
| * qla2x00_start_scsi() - Send a SCSI command to the ISP |
| * @sp: command to send to the ISP |
| * |
| * Returns non-zero if a failure occured, else zero. |
| */ |
| int |
| qla2x00_start_scsi(srb_t *sp) |
| { |
| int ret; |
| unsigned long flags; |
| scsi_qla_host_t *ha; |
| struct scsi_cmnd *cmd; |
| uint32_t *clr_ptr; |
| uint32_t index; |
| uint32_t handle; |
| cmd_entry_t *cmd_pkt; |
| struct scatterlist *sg; |
| uint16_t cnt; |
| uint16_t req_cnt; |
| uint16_t tot_dsds; |
| struct device_reg_2xxx __iomem *reg; |
| char tag[2]; |
| |
| /* Setup device pointers. */ |
| ret = 0; |
| ha = sp->ha; |
| reg = &ha->iobase->isp; |
| cmd = sp->cmd; |
| /* So we know we haven't pci_map'ed anything yet */ |
| tot_dsds = 0; |
| |
| /* Send marker if required */ |
| if (ha->marker_needed != 0) { |
| if (qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) { |
| return (QLA_FUNCTION_FAILED); |
| } |
| ha->marker_needed = 0; |
| } |
| |
| /* Acquire ring specific lock */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Check for room in outstanding command list. */ |
| handle = ha->current_outstanding_cmd; |
| for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { |
| handle++; |
| if (handle == MAX_OUTSTANDING_COMMANDS) |
| handle = 1; |
| if (ha->outstanding_cmds[handle] == 0) |
| break; |
| } |
| if (index == MAX_OUTSTANDING_COMMANDS) |
| goto queuing_error; |
| |
| /* Map the sg table so we have an accurate count of sg entries needed */ |
| if (cmd->use_sg) { |
| sg = (struct scatterlist *) cmd->request_buffer; |
| tot_dsds = pci_map_sg(ha->pdev, sg, cmd->use_sg, |
| cmd->sc_data_direction); |
| if (tot_dsds == 0) |
| goto queuing_error; |
| } else if (cmd->request_bufflen) { |
| dma_addr_t req_dma; |
| |
| req_dma = pci_map_single(ha->pdev, cmd->request_buffer, |
| cmd->request_bufflen, cmd->sc_data_direction); |
| if (dma_mapping_error(req_dma)) |
| goto queuing_error; |
| |
| sp->dma_handle = req_dma; |
| tot_dsds = 1; |
| } |
| |
| /* Calculate the number of request entries needed. */ |
| req_cnt = ha->isp_ops.calc_req_entries(tot_dsds); |
| if (ha->req_q_cnt < (req_cnt + 2)) { |
| cnt = RD_REG_WORD_RELAXED(ISP_REQ_Q_OUT(ha, reg)); |
| if (ha->req_ring_index < cnt) |
| ha->req_q_cnt = cnt - ha->req_ring_index; |
| else |
| ha->req_q_cnt = ha->request_q_length - |
| (ha->req_ring_index - cnt); |
| } |
| if (ha->req_q_cnt < (req_cnt + 2)) |
| goto queuing_error; |
| |
| /* Build command packet */ |
| ha->current_outstanding_cmd = handle; |
| ha->outstanding_cmds[handle] = sp; |
| sp->ha = ha; |
| sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; |
| ha->req_q_cnt -= req_cnt; |
| |
| cmd_pkt = (cmd_entry_t *)ha->request_ring_ptr; |
| cmd_pkt->handle = handle; |
| /* Zero out remaining portion of packet. */ |
| clr_ptr = (uint32_t *)cmd_pkt + 2; |
| memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); |
| cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); |
| |
| /* Set target ID and LUN number*/ |
| SET_TARGET_ID(ha, cmd_pkt->target, sp->fcport->loop_id); |
| cmd_pkt->lun = cpu_to_le16(sp->cmd->device->lun); |
| |
| /* Update tagged queuing modifier */ |
| cmd_pkt->control_flags = __constant_cpu_to_le16(CF_SIMPLE_TAG); |
| if (scsi_populate_tag_msg(cmd, tag)) { |
| switch (tag[0]) { |
| case MSG_HEAD_TAG: |
| cmd_pkt->control_flags = |
| __constant_cpu_to_le16(CF_HEAD_TAG); |
| break; |
| case MSG_ORDERED_TAG: |
| cmd_pkt->control_flags = |
| __constant_cpu_to_le16(CF_ORDERED_TAG); |
| break; |
| } |
| } |
| |
| /* Load SCSI command packet. */ |
| memcpy(cmd_pkt->scsi_cdb, cmd->cmnd, cmd->cmd_len); |
| cmd_pkt->byte_count = cpu_to_le32((uint32_t)cmd->request_bufflen); |
| |
| /* Build IOCB segments */ |
| ha->isp_ops.build_iocbs(sp, cmd_pkt, tot_dsds); |
| |
| /* Set total data segment count. */ |
| cmd_pkt->entry_count = (uint8_t)req_cnt; |
| wmb(); |
| |
| /* Adjust ring index. */ |
| ha->req_ring_index++; |
| if (ha->req_ring_index == ha->request_q_length) { |
| ha->req_ring_index = 0; |
| ha->request_ring_ptr = ha->request_ring; |
| } else |
| ha->request_ring_ptr++; |
| |
| sp->flags |= SRB_DMA_VALID; |
| sp->state = SRB_ACTIVE_STATE; |
| |
| /* Set chip new ring index. */ |
| WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), ha->req_ring_index); |
| RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, reg)); /* PCI Posting. */ |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| return (QLA_SUCCESS); |
| |
| queuing_error: |
| if (cmd->use_sg && tot_dsds) { |
| sg = (struct scatterlist *) cmd->request_buffer; |
| pci_unmap_sg(ha->pdev, sg, cmd->use_sg, |
| cmd->sc_data_direction); |
| } else if (tot_dsds) { |
| pci_unmap_single(ha->pdev, sp->dma_handle, |
| cmd->request_bufflen, cmd->sc_data_direction); |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return (QLA_FUNCTION_FAILED); |
| } |
| |
| /** |
| * qla2x00_marker() - Send a marker IOCB to the firmware. |
| * @ha: HA context |
| * @loop_id: loop ID |
| * @lun: LUN |
| * @type: marker modifier |
| * |
| * Can be called from both normal and interrupt context. |
| * |
| * Returns non-zero if a failure occured, else zero. |
| */ |
| int |
| __qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, |
| uint8_t type) |
| { |
| mrk_entry_t *mrk; |
| struct mrk_entry_24xx *mrk24; |
| |
| mrk24 = NULL; |
| mrk = (mrk_entry_t *)qla2x00_req_pkt(ha); |
| if (mrk == NULL) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate Marker IOCB.\n", |
| __func__, ha->host_no)); |
| |
| return (QLA_FUNCTION_FAILED); |
| } |
| |
| mrk->entry_type = MARKER_TYPE; |
| mrk->modifier = type; |
| if (type != MK_SYNC_ALL) { |
| if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) { |
| mrk24 = (struct mrk_entry_24xx *) mrk; |
| mrk24->nport_handle = cpu_to_le16(loop_id); |
| mrk24->lun[1] = LSB(lun); |
| mrk24->lun[2] = MSB(lun); |
| } else { |
| SET_TARGET_ID(ha, mrk->target, loop_id); |
| mrk->lun = cpu_to_le16(lun); |
| } |
| } |
| wmb(); |
| |
| qla2x00_isp_cmd(ha); |
| |
| return (QLA_SUCCESS); |
| } |
| |
| int |
| qla2x00_marker(scsi_qla_host_t *ha, uint16_t loop_id, uint16_t lun, |
| uint8_t type) |
| { |
| int ret; |
| unsigned long flags = 0; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| ret = __qla2x00_marker(ha, loop_id, lun, type); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return (ret); |
| } |
| |
| /** |
| * qla2x00_req_pkt() - Retrieve a request packet from the request ring. |
| * @ha: HA context |
| * |
| * Note: The caller must hold the hardware lock before calling this routine. |
| * |
| * Returns NULL if function failed, else, a pointer to the request packet. |
| */ |
| static request_t * |
| qla2x00_req_pkt(scsi_qla_host_t *ha) |
| { |
| device_reg_t __iomem *reg = ha->iobase; |
| request_t *pkt = NULL; |
| uint16_t cnt; |
| uint32_t *dword_ptr; |
| uint32_t timer; |
| uint16_t req_cnt = 1; |
| |
| /* Wait 1 second for slot. */ |
| for (timer = HZ; timer; timer--) { |
| if ((req_cnt + 2) >= ha->req_q_cnt) { |
| /* Calculate number of free request entries. */ |
| if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) |
| cnt = (uint16_t)RD_REG_DWORD( |
| ®->isp24.req_q_out); |
| else |
| cnt = qla2x00_debounce_register( |
| ISP_REQ_Q_OUT(ha, ®->isp)); |
| if (ha->req_ring_index < cnt) |
| ha->req_q_cnt = cnt - ha->req_ring_index; |
| else |
| ha->req_q_cnt = ha->request_q_length - |
| (ha->req_ring_index - cnt); |
| } |
| /* If room for request in request ring. */ |
| if ((req_cnt + 2) < ha->req_q_cnt) { |
| ha->req_q_cnt--; |
| pkt = ha->request_ring_ptr; |
| |
| /* Zero out packet. */ |
| dword_ptr = (uint32_t *)pkt; |
| for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++) |
| *dword_ptr++ = 0; |
| |
| /* Set system defined field. */ |
| pkt->sys_define = (uint8_t)ha->req_ring_index; |
| |
| /* Set entry count. */ |
| pkt->entry_count = 1; |
| |
| break; |
| } |
| |
| /* Release ring specific lock */ |
| spin_unlock(&ha->hardware_lock); |
| |
| udelay(2); /* 2 us */ |
| |
| /* Check for pending interrupts. */ |
| /* During init we issue marker directly */ |
| if (!ha->marker_needed) |
| qla2x00_poll(ha); |
| |
| spin_lock_irq(&ha->hardware_lock); |
| } |
| if (!pkt) { |
| DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__)); |
| } |
| |
| return (pkt); |
| } |
| |
| /** |
| * qla2x00_isp_cmd() - Modify the request ring pointer. |
| * @ha: HA context |
| * |
| * Note: The caller must hold the hardware lock before calling this routine. |
| */ |
| void |
| qla2x00_isp_cmd(scsi_qla_host_t *ha) |
| { |
| device_reg_t __iomem *reg = ha->iobase; |
| |
| DEBUG5(printk("%s(): IOCB data:\n", __func__)); |
| DEBUG5(qla2x00_dump_buffer( |
| (uint8_t *)ha->request_ring_ptr, REQUEST_ENTRY_SIZE)); |
| |
| /* Adjust ring index. */ |
| ha->req_ring_index++; |
| if (ha->req_ring_index == ha->request_q_length) { |
| ha->req_ring_index = 0; |
| ha->request_ring_ptr = ha->request_ring; |
| } else |
| ha->request_ring_ptr++; |
| |
| /* Set chip new ring index. */ |
| if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) { |
| WRT_REG_DWORD(®->isp24.req_q_in, ha->req_ring_index); |
| RD_REG_DWORD_RELAXED(®->isp24.req_q_in); |
| } else { |
| WRT_REG_WORD(ISP_REQ_Q_IN(ha, ®->isp), ha->req_ring_index); |
| RD_REG_WORD_RELAXED(ISP_REQ_Q_IN(ha, ®->isp)); |
| } |
| |
| } |
| |
| /** |
| * qla24xx_calc_iocbs() - Determine number of Command Type 3 and |
| * Continuation Type 1 IOCBs to allocate. |
| * |
| * @dsds: number of data segment decriptors needed |
| * |
| * Returns the number of IOCB entries needed to store @dsds. |
| */ |
| static inline uint16_t |
| qla24xx_calc_iocbs(uint16_t dsds) |
| { |
| uint16_t iocbs; |
| |
| iocbs = 1; |
| if (dsds > 1) { |
| iocbs += (dsds - 1) / 5; |
| if ((dsds - 1) % 5) |
| iocbs++; |
| } |
| return iocbs; |
| } |
| |
| /** |
| * qla24xx_build_scsi_iocbs() - Build IOCB command utilizing Command Type 7 |
| * IOCB types. |
| * |
| * @sp: SRB command to process |
| * @cmd_pkt: Command type 3 IOCB |
| * @tot_dsds: Total number of segments to transfer |
| */ |
| static inline void |
| qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, |
| uint16_t tot_dsds) |
| { |
| uint16_t avail_dsds; |
| uint32_t *cur_dsd; |
| scsi_qla_host_t *ha; |
| struct scsi_cmnd *cmd; |
| |
| cmd = sp->cmd; |
| |
| /* Update entry type to indicate Command Type 3 IOCB */ |
| *((uint32_t *)(&cmd_pkt->entry_type)) = |
| __constant_cpu_to_le32(COMMAND_TYPE_7); |
| |
| /* No data transfer */ |
| if (cmd->request_bufflen == 0 || cmd->sc_data_direction == DMA_NONE) { |
| cmd_pkt->byte_count = __constant_cpu_to_le32(0); |
| return; |
| } |
| |
| ha = sp->ha; |
| |
| /* Set transfer direction */ |
| if (cmd->sc_data_direction == DMA_TO_DEVICE) |
| cmd_pkt->task_mgmt_flags = |
| __constant_cpu_to_le16(TMF_WRITE_DATA); |
| else if (cmd->sc_data_direction == DMA_FROM_DEVICE) |
| cmd_pkt->task_mgmt_flags = |
| __constant_cpu_to_le16(TMF_READ_DATA); |
| |
| /* One DSD is available in the Command Type 3 IOCB */ |
| avail_dsds = 1; |
| cur_dsd = (uint32_t *)&cmd_pkt->dseg_0_address; |
| |
| /* Load data segments */ |
| if (cmd->use_sg != 0) { |
| struct scatterlist *cur_seg; |
| struct scatterlist *end_seg; |
| |
| cur_seg = (struct scatterlist *)cmd->request_buffer; |
| end_seg = cur_seg + tot_dsds; |
| while (cur_seg < end_seg) { |
| dma_addr_t sle_dma; |
| cont_a64_entry_t *cont_pkt; |
| |
| /* Allocate additional continuation packets? */ |
| if (avail_dsds == 0) { |
| /* |
| * Five DSDs are available in the Continuation |
| * Type 1 IOCB. |
| */ |
| cont_pkt = qla2x00_prep_cont_type1_iocb(ha); |
| cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; |
| avail_dsds = 5; |
| } |
| |
| sle_dma = sg_dma_address(cur_seg); |
| *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg)); |
| avail_dsds--; |
| |
| cur_seg++; |
| } |
| } else { |
| *cur_dsd++ = cpu_to_le32(LSD(sp->dma_handle)); |
| *cur_dsd++ = cpu_to_le32(MSD(sp->dma_handle)); |
| *cur_dsd++ = cpu_to_le32(cmd->request_bufflen); |
| } |
| } |
| |
| |
| /** |
| * qla24xx_start_scsi() - Send a SCSI command to the ISP |
| * @sp: command to send to the ISP |
| * |
| * Returns non-zero if a failure occured, else zero. |
| */ |
| int |
| qla24xx_start_scsi(srb_t *sp) |
| { |
| int ret; |
| unsigned long flags; |
| scsi_qla_host_t *ha; |
| struct scsi_cmnd *cmd; |
| uint32_t *clr_ptr; |
| uint32_t index; |
| uint32_t handle; |
| struct cmd_type_7 *cmd_pkt; |
| struct scatterlist *sg; |
| uint16_t cnt; |
| uint16_t req_cnt; |
| uint16_t tot_dsds; |
| struct device_reg_24xx __iomem *reg; |
| char tag[2]; |
| |
| /* Setup device pointers. */ |
| ret = 0; |
| ha = sp->ha; |
| reg = &ha->iobase->isp24; |
| cmd = sp->cmd; |
| /* So we know we haven't pci_map'ed anything yet */ |
| tot_dsds = 0; |
| |
| /* Send marker if required */ |
| if (ha->marker_needed != 0) { |
| if (qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) { |
| return QLA_FUNCTION_FAILED; |
| } |
| ha->marker_needed = 0; |
| } |
| |
| /* Acquire ring specific lock */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Check for room in outstanding command list. */ |
| handle = ha->current_outstanding_cmd; |
| for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { |
| handle++; |
| if (handle == MAX_OUTSTANDING_COMMANDS) |
| handle = 1; |
| if (ha->outstanding_cmds[handle] == 0) |
| break; |
| } |
| if (index == MAX_OUTSTANDING_COMMANDS) |
| goto queuing_error; |
| |
| /* Map the sg table so we have an accurate count of sg entries needed */ |
| if (cmd->use_sg) { |
| sg = (struct scatterlist *) cmd->request_buffer; |
| tot_dsds = pci_map_sg(ha->pdev, sg, cmd->use_sg, |
| cmd->sc_data_direction); |
| if (tot_dsds == 0) |
| goto queuing_error; |
| } else if (cmd->request_bufflen) { |
| dma_addr_t req_dma; |
| |
| req_dma = pci_map_single(ha->pdev, cmd->request_buffer, |
| cmd->request_bufflen, cmd->sc_data_direction); |
| if (dma_mapping_error(req_dma)) |
| goto queuing_error; |
| |
| sp->dma_handle = req_dma; |
| tot_dsds = 1; |
| } |
| |
| req_cnt = qla24xx_calc_iocbs(tot_dsds); |
| if (ha->req_q_cnt < (req_cnt + 2)) { |
| cnt = (uint16_t)RD_REG_DWORD_RELAXED(®->req_q_out); |
| if (ha->req_ring_index < cnt) |
| ha->req_q_cnt = cnt - ha->req_ring_index; |
| else |
| ha->req_q_cnt = ha->request_q_length - |
| (ha->req_ring_index - cnt); |
| } |
| if (ha->req_q_cnt < (req_cnt + 2)) |
| goto queuing_error; |
| |
| /* Build command packet. */ |
| ha->current_outstanding_cmd = handle; |
| ha->outstanding_cmds[handle] = sp; |
| sp->ha = ha; |
| sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; |
| ha->req_q_cnt -= req_cnt; |
| |
| cmd_pkt = (struct cmd_type_7 *)ha->request_ring_ptr; |
| cmd_pkt->handle = handle; |
| |
| /* Zero out remaining portion of packet. */ |
| clr_ptr = (uint32_t *)cmd_pkt + 2; |
| memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); |
| cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); |
| |
| /* Set NPORT-ID and LUN number*/ |
| cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id); |
| cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa; |
| cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; |
| cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; |
| |
| cmd_pkt->lun[1] = LSB(sp->cmd->device->lun); |
| cmd_pkt->lun[2] = MSB(sp->cmd->device->lun); |
| |
| /* Update tagged queuing modifier -- default is TSK_SIMPLE (0). */ |
| if (scsi_populate_tag_msg(cmd, tag)) { |
| switch (tag[0]) { |
| case MSG_HEAD_TAG: |
| cmd_pkt->task = TSK_HEAD_OF_QUEUE; |
| break; |
| case MSG_ORDERED_TAG: |
| cmd_pkt->task = TSK_ORDERED; |
| break; |
| } |
| } |
| |
| /* Load SCSI command packet. */ |
| memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len); |
| host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb)); |
| |
| cmd_pkt->byte_count = cpu_to_le32((uint32_t)cmd->request_bufflen); |
| |
| /* Build IOCB segments */ |
| qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds); |
| |
| /* Set total data segment count. */ |
| cmd_pkt->entry_count = (uint8_t)req_cnt; |
| wmb(); |
| |
| /* Adjust ring index. */ |
| ha->req_ring_index++; |
| if (ha->req_ring_index == ha->request_q_length) { |
| ha->req_ring_index = 0; |
| ha->request_ring_ptr = ha->request_ring; |
| } else |
| ha->request_ring_ptr++; |
| |
| sp->flags |= SRB_DMA_VALID; |
| sp->state = SRB_ACTIVE_STATE; |
| |
| /* Set chip new ring index. */ |
| WRT_REG_DWORD(®->req_q_in, ha->req_ring_index); |
| RD_REG_DWORD_RELAXED(®->req_q_in); /* PCI Posting. */ |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| return QLA_SUCCESS; |
| |
| queuing_error: |
| if (cmd->use_sg && tot_dsds) { |
| sg = (struct scatterlist *) cmd->request_buffer; |
| pci_unmap_sg(ha->pdev, sg, cmd->use_sg, |
| cmd->sc_data_direction); |
| } else if (tot_dsds) { |
| pci_unmap_single(ha->pdev, sp->dma_handle, |
| cmd->request_bufflen, cmd->sc_data_direction); |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_FUNCTION_FAILED; |
| } |