| /* |
| * linux/fs/ext3/balloc.c |
| * |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * Enhanced block allocation by Stephen Tweedie (sct@redhat.com), 1993 |
| * Big-endian to little-endian byte-swapping/bitmaps by |
| * David S. Miller (davem@caip.rutgers.edu), 1995 |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/time.h> |
| #include <linux/fs.h> |
| #include <linux/jbd.h> |
| #include <linux/ext3_fs.h> |
| #include <linux/ext3_jbd.h> |
| #include <linux/quotaops.h> |
| #include <linux/buffer_head.h> |
| |
| /* |
| * balloc.c contains the blocks allocation and deallocation routines |
| */ |
| |
| /* |
| * The free blocks are managed by bitmaps. A file system contains several |
| * blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap |
| * block for inodes, N blocks for the inode table and data blocks. |
| * |
| * The file system contains group descriptors which are located after the |
| * super block. Each descriptor contains the number of the bitmap block and |
| * the free blocks count in the block. The descriptors are loaded in memory |
| * when a file system is mounted (see ext3_read_super). |
| */ |
| |
| |
| #define in_range(b, first, len) ((b) >= (first) && (b) <= (first) + (len) - 1) |
| |
| struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb, |
| unsigned int block_group, |
| struct buffer_head ** bh) |
| { |
| unsigned long group_desc; |
| unsigned long offset; |
| struct ext3_group_desc * desc; |
| struct ext3_sb_info *sbi = EXT3_SB(sb); |
| |
| if (block_group >= sbi->s_groups_count) { |
| ext3_error (sb, "ext3_get_group_desc", |
| "block_group >= groups_count - " |
| "block_group = %d, groups_count = %lu", |
| block_group, sbi->s_groups_count); |
| |
| return NULL; |
| } |
| smp_rmb(); |
| |
| group_desc = block_group >> EXT3_DESC_PER_BLOCK_BITS(sb); |
| offset = block_group & (EXT3_DESC_PER_BLOCK(sb) - 1); |
| if (!sbi->s_group_desc[group_desc]) { |
| ext3_error (sb, "ext3_get_group_desc", |
| "Group descriptor not loaded - " |
| "block_group = %d, group_desc = %lu, desc = %lu", |
| block_group, group_desc, offset); |
| return NULL; |
| } |
| |
| desc = (struct ext3_group_desc *) sbi->s_group_desc[group_desc]->b_data; |
| if (bh) |
| *bh = sbi->s_group_desc[group_desc]; |
| return desc + offset; |
| } |
| |
| /* |
| * Read the bitmap for a given block_group, reading into the specified |
| * slot in the superblock's bitmap cache. |
| * |
| * Return buffer_head on success or NULL in case of failure. |
| */ |
| static struct buffer_head * |
| read_block_bitmap(struct super_block *sb, unsigned int block_group) |
| { |
| struct ext3_group_desc * desc; |
| struct buffer_head * bh = NULL; |
| |
| desc = ext3_get_group_desc (sb, block_group, NULL); |
| if (!desc) |
| goto error_out; |
| bh = sb_bread(sb, le32_to_cpu(desc->bg_block_bitmap)); |
| if (!bh) |
| ext3_error (sb, "read_block_bitmap", |
| "Cannot read block bitmap - " |
| "block_group = %d, block_bitmap = %u", |
| block_group, le32_to_cpu(desc->bg_block_bitmap)); |
| error_out: |
| return bh; |
| } |
| /* |
| * The reservation window structure operations |
| * -------------------------------------------- |
| * Operations include: |
| * dump, find, add, remove, is_empty, find_next_reservable_window, etc. |
| * |
| * We use sorted double linked list for the per-filesystem reservation |
| * window list. (like in vm_region). |
| * |
| * Initially, we keep those small operations in the abstract functions, |
| * so later if we need a better searching tree than double linked-list, |
| * we could easily switch to that without changing too much |
| * code. |
| */ |
| #if 0 |
| static void __rsv_window_dump(struct rb_root *root, int verbose, |
| const char *fn) |
| { |
| struct rb_node *n; |
| struct ext3_reserve_window_node *rsv, *prev; |
| int bad; |
| |
| restart: |
| n = rb_first(root); |
| bad = 0; |
| prev = NULL; |
| |
| printk("Block Allocation Reservation Windows Map (%s):\n", fn); |
| while (n) { |
| rsv = list_entry(n, struct ext3_reserve_window_node, rsv_node); |
| if (verbose) |
| printk("reservation window 0x%p " |
| "start: %d, end: %d\n", |
| rsv, rsv->rsv_start, rsv->rsv_end); |
| if (rsv->rsv_start && rsv->rsv_start >= rsv->rsv_end) { |
| printk("Bad reservation %p (start >= end)\n", |
| rsv); |
| bad = 1; |
| } |
| if (prev && prev->rsv_end >= rsv->rsv_start) { |
| printk("Bad reservation %p (prev->end >= start)\n", |
| rsv); |
| bad = 1; |
| } |
| if (bad) { |
| if (!verbose) { |
| printk("Restarting reservation walk in verbose mode\n"); |
| verbose = 1; |
| goto restart; |
| } |
| } |
| n = rb_next(n); |
| prev = rsv; |
| } |
| printk("Window map complete.\n"); |
| if (bad) |
| BUG(); |
| } |
| #define rsv_window_dump(root, verbose) \ |
| __rsv_window_dump((root), (verbose), __FUNCTION__) |
| #else |
| #define rsv_window_dump(root, verbose) do {} while (0) |
| #endif |
| |
| static int |
| goal_in_my_reservation(struct ext3_reserve_window *rsv, int goal, |
| unsigned int group, struct super_block * sb) |
| { |
| unsigned long group_first_block, group_last_block; |
| |
| group_first_block = le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block) + |
| group * EXT3_BLOCKS_PER_GROUP(sb); |
| group_last_block = group_first_block + EXT3_BLOCKS_PER_GROUP(sb) - 1; |
| |
| if ((rsv->_rsv_start > group_last_block) || |
| (rsv->_rsv_end < group_first_block)) |
| return 0; |
| if ((goal >= 0) && ((goal + group_first_block < rsv->_rsv_start) |
| || (goal + group_first_block > rsv->_rsv_end))) |
| return 0; |
| return 1; |
| } |
| |
| /* |
| * Find the reserved window which includes the goal, or the previous one |
| * if the goal is not in any window. |
| * Returns NULL if there are no windows or if all windows start after the goal. |
| */ |
| static struct ext3_reserve_window_node * |
| search_reserve_window(struct rb_root *root, unsigned long goal) |
| { |
| struct rb_node *n = root->rb_node; |
| struct ext3_reserve_window_node *rsv; |
| |
| if (!n) |
| return NULL; |
| |
| do { |
| rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); |
| |
| if (goal < rsv->rsv_start) |
| n = n->rb_left; |
| else if (goal > rsv->rsv_end) |
| n = n->rb_right; |
| else |
| return rsv; |
| } while (n); |
| /* |
| * We've fallen off the end of the tree: the goal wasn't inside |
| * any particular node. OK, the previous node must be to one |
| * side of the interval containing the goal. If it's the RHS, |
| * we need to back up one. |
| */ |
| if (rsv->rsv_start > goal) { |
| n = rb_prev(&rsv->rsv_node); |
| rsv = rb_entry(n, struct ext3_reserve_window_node, rsv_node); |
| } |
| return rsv; |
| } |
| |
| void ext3_rsv_window_add(struct super_block *sb, |
| struct ext3_reserve_window_node *rsv) |
| { |
| struct rb_root *root = &EXT3_SB(sb)->s_rsv_window_root; |
| struct rb_node *node = &rsv->rsv_node; |
| unsigned int start = rsv->rsv_start; |
| |
| struct rb_node ** p = &root->rb_node; |
| struct rb_node * parent = NULL; |
| struct ext3_reserve_window_node *this; |
| |
| while (*p) |
| { |
| parent = *p; |
| this = rb_entry(parent, struct ext3_reserve_window_node, rsv_node); |
| |
| if (start < this->rsv_start) |
| p = &(*p)->rb_left; |
| else if (start > this->rsv_end) |
| p = &(*p)->rb_right; |
| else |
| BUG(); |
| } |
| |
| rb_link_node(node, parent, p); |
| rb_insert_color(node, root); |
| } |
| |
| static void rsv_window_remove(struct super_block *sb, |
| struct ext3_reserve_window_node *rsv) |
| { |
| rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; |
| rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; |
| rsv->rsv_alloc_hit = 0; |
| rb_erase(&rsv->rsv_node, &EXT3_SB(sb)->s_rsv_window_root); |
| } |
| |
| static inline int rsv_is_empty(struct ext3_reserve_window *rsv) |
| { |
| /* a valid reservation end block could not be 0 */ |
| return (rsv->_rsv_end == EXT3_RESERVE_WINDOW_NOT_ALLOCATED); |
| } |
| void ext3_init_block_alloc_info(struct inode *inode) |
| { |
| struct ext3_inode_info *ei = EXT3_I(inode); |
| struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info; |
| struct super_block *sb = inode->i_sb; |
| |
| block_i = kmalloc(sizeof(*block_i), GFP_NOFS); |
| if (block_i) { |
| struct ext3_reserve_window_node *rsv = &block_i->rsv_window_node; |
| |
| rsv->rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; |
| rsv->rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; |
| |
| /* |
| * if filesystem is mounted with NORESERVATION, the goal |
| * reservation window size is set to zero to indicate |
| * block reservation is off |
| */ |
| if (!test_opt(sb, RESERVATION)) |
| rsv->rsv_goal_size = 0; |
| else |
| rsv->rsv_goal_size = EXT3_DEFAULT_RESERVE_BLOCKS; |
| rsv->rsv_alloc_hit = 0; |
| block_i->last_alloc_logical_block = 0; |
| block_i->last_alloc_physical_block = 0; |
| } |
| ei->i_block_alloc_info = block_i; |
| } |
| |
| void ext3_discard_reservation(struct inode *inode) |
| { |
| struct ext3_inode_info *ei = EXT3_I(inode); |
| struct ext3_block_alloc_info *block_i = ei->i_block_alloc_info; |
| struct ext3_reserve_window_node *rsv; |
| spinlock_t *rsv_lock = &EXT3_SB(inode->i_sb)->s_rsv_window_lock; |
| |
| if (!block_i) |
| return; |
| |
| rsv = &block_i->rsv_window_node; |
| if (!rsv_is_empty(&rsv->rsv_window)) { |
| spin_lock(rsv_lock); |
| if (!rsv_is_empty(&rsv->rsv_window)) |
| rsv_window_remove(inode->i_sb, rsv); |
| spin_unlock(rsv_lock); |
| } |
| } |
| |
| /* Free given blocks, update quota and i_blocks field */ |
| void ext3_free_blocks_sb(handle_t *handle, struct super_block *sb, |
| unsigned long block, unsigned long count, |
| int *pdquot_freed_blocks) |
| { |
| struct buffer_head *bitmap_bh = NULL; |
| struct buffer_head *gd_bh; |
| unsigned long block_group; |
| unsigned long bit; |
| unsigned long i; |
| unsigned long overflow; |
| struct ext3_group_desc * desc; |
| struct ext3_super_block * es; |
| struct ext3_sb_info *sbi; |
| int err = 0, ret; |
| unsigned group_freed; |
| |
| *pdquot_freed_blocks = 0; |
| sbi = EXT3_SB(sb); |
| es = sbi->s_es; |
| if (block < le32_to_cpu(es->s_first_data_block) || |
| block + count < block || |
| block + count > le32_to_cpu(es->s_blocks_count)) { |
| ext3_error (sb, "ext3_free_blocks", |
| "Freeing blocks not in datazone - " |
| "block = %lu, count = %lu", block, count); |
| goto error_return; |
| } |
| |
| ext3_debug ("freeing block(s) %lu-%lu\n", block, block + count - 1); |
| |
| do_more: |
| overflow = 0; |
| block_group = (block - le32_to_cpu(es->s_first_data_block)) / |
| EXT3_BLOCKS_PER_GROUP(sb); |
| bit = (block - le32_to_cpu(es->s_first_data_block)) % |
| EXT3_BLOCKS_PER_GROUP(sb); |
| /* |
| * Check to see if we are freeing blocks across a group |
| * boundary. |
| */ |
| if (bit + count > EXT3_BLOCKS_PER_GROUP(sb)) { |
| overflow = bit + count - EXT3_BLOCKS_PER_GROUP(sb); |
| count -= overflow; |
| } |
| brelse(bitmap_bh); |
| bitmap_bh = read_block_bitmap(sb, block_group); |
| if (!bitmap_bh) |
| goto error_return; |
| desc = ext3_get_group_desc (sb, block_group, &gd_bh); |
| if (!desc) |
| goto error_return; |
| |
| if (in_range (le32_to_cpu(desc->bg_block_bitmap), block, count) || |
| in_range (le32_to_cpu(desc->bg_inode_bitmap), block, count) || |
| in_range (block, le32_to_cpu(desc->bg_inode_table), |
| sbi->s_itb_per_group) || |
| in_range (block + count - 1, le32_to_cpu(desc->bg_inode_table), |
| sbi->s_itb_per_group)) |
| ext3_error (sb, "ext3_free_blocks", |
| "Freeing blocks in system zones - " |
| "Block = %lu, count = %lu", |
| block, count); |
| |
| /* |
| * We are about to start releasing blocks in the bitmap, |
| * so we need undo access. |
| */ |
| /* @@@ check errors */ |
| BUFFER_TRACE(bitmap_bh, "getting undo access"); |
| err = ext3_journal_get_undo_access(handle, bitmap_bh); |
| if (err) |
| goto error_return; |
| |
| /* |
| * We are about to modify some metadata. Call the journal APIs |
| * to unshare ->b_data if a currently-committing transaction is |
| * using it |
| */ |
| BUFFER_TRACE(gd_bh, "get_write_access"); |
| err = ext3_journal_get_write_access(handle, gd_bh); |
| if (err) |
| goto error_return; |
| |
| jbd_lock_bh_state(bitmap_bh); |
| |
| for (i = 0, group_freed = 0; i < count; i++) { |
| /* |
| * An HJ special. This is expensive... |
| */ |
| #ifdef CONFIG_JBD_DEBUG |
| jbd_unlock_bh_state(bitmap_bh); |
| { |
| struct buffer_head *debug_bh; |
| debug_bh = sb_find_get_block(sb, block + i); |
| if (debug_bh) { |
| BUFFER_TRACE(debug_bh, "Deleted!"); |
| if (!bh2jh(bitmap_bh)->b_committed_data) |
| BUFFER_TRACE(debug_bh, |
| "No commited data in bitmap"); |
| BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap"); |
| __brelse(debug_bh); |
| } |
| } |
| jbd_lock_bh_state(bitmap_bh); |
| #endif |
| if (need_resched()) { |
| jbd_unlock_bh_state(bitmap_bh); |
| cond_resched(); |
| jbd_lock_bh_state(bitmap_bh); |
| } |
| /* @@@ This prevents newly-allocated data from being |
| * freed and then reallocated within the same |
| * transaction. |
| * |
| * Ideally we would want to allow that to happen, but to |
| * do so requires making journal_forget() capable of |
| * revoking the queued write of a data block, which |
| * implies blocking on the journal lock. *forget() |
| * cannot block due to truncate races. |
| * |
| * Eventually we can fix this by making journal_forget() |
| * return a status indicating whether or not it was able |
| * to revoke the buffer. On successful revoke, it is |
| * safe not to set the allocation bit in the committed |
| * bitmap, because we know that there is no outstanding |
| * activity on the buffer any more and so it is safe to |
| * reallocate it. |
| */ |
| BUFFER_TRACE(bitmap_bh, "set in b_committed_data"); |
| J_ASSERT_BH(bitmap_bh, |
| bh2jh(bitmap_bh)->b_committed_data != NULL); |
| ext3_set_bit_atomic(sb_bgl_lock(sbi, block_group), bit + i, |
| bh2jh(bitmap_bh)->b_committed_data); |
| |
| /* |
| * We clear the bit in the bitmap after setting the committed |
| * data bit, because this is the reverse order to that which |
| * the allocator uses. |
| */ |
| BUFFER_TRACE(bitmap_bh, "clear bit"); |
| if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, block_group), |
| bit + i, bitmap_bh->b_data)) { |
| jbd_unlock_bh_state(bitmap_bh); |
| ext3_error(sb, __FUNCTION__, |
| "bit already cleared for block %lu", block + i); |
| jbd_lock_bh_state(bitmap_bh); |
| BUFFER_TRACE(bitmap_bh, "bit already cleared"); |
| } else { |
| group_freed++; |
| } |
| } |
| jbd_unlock_bh_state(bitmap_bh); |
| |
| spin_lock(sb_bgl_lock(sbi, block_group)); |
| desc->bg_free_blocks_count = |
| cpu_to_le16(le16_to_cpu(desc->bg_free_blocks_count) + |
| group_freed); |
| spin_unlock(sb_bgl_lock(sbi, block_group)); |
| percpu_counter_mod(&sbi->s_freeblocks_counter, count); |
| |
| /* We dirtied the bitmap block */ |
| BUFFER_TRACE(bitmap_bh, "dirtied bitmap block"); |
| err = ext3_journal_dirty_metadata(handle, bitmap_bh); |
| |
| /* And the group descriptor block */ |
| BUFFER_TRACE(gd_bh, "dirtied group descriptor block"); |
| ret = ext3_journal_dirty_metadata(handle, gd_bh); |
| if (!err) err = ret; |
| *pdquot_freed_blocks += group_freed; |
| |
| if (overflow && !err) { |
| block += count; |
| count = overflow; |
| goto do_more; |
| } |
| sb->s_dirt = 1; |
| error_return: |
| brelse(bitmap_bh); |
| ext3_std_error(sb, err); |
| return; |
| } |
| |
| /* Free given blocks, update quota and i_blocks field */ |
| void ext3_free_blocks(handle_t *handle, struct inode *inode, |
| unsigned long block, unsigned long count) |
| { |
| struct super_block * sb; |
| int dquot_freed_blocks; |
| |
| sb = inode->i_sb; |
| if (!sb) { |
| printk ("ext3_free_blocks: nonexistent device"); |
| return; |
| } |
| ext3_free_blocks_sb(handle, sb, block, count, &dquot_freed_blocks); |
| if (dquot_freed_blocks) |
| DQUOT_FREE_BLOCK(inode, dquot_freed_blocks); |
| return; |
| } |
| |
| /* |
| * For ext3 allocations, we must not reuse any blocks which are |
| * allocated in the bitmap buffer's "last committed data" copy. This |
| * prevents deletes from freeing up the page for reuse until we have |
| * committed the delete transaction. |
| * |
| * If we didn't do this, then deleting something and reallocating it as |
| * data would allow the old block to be overwritten before the |
| * transaction committed (because we force data to disk before commit). |
| * This would lead to corruption if we crashed between overwriting the |
| * data and committing the delete. |
| * |
| * @@@ We may want to make this allocation behaviour conditional on |
| * data-writes at some point, and disable it for metadata allocations or |
| * sync-data inodes. |
| */ |
| static int ext3_test_allocatable(int nr, struct buffer_head *bh) |
| { |
| int ret; |
| struct journal_head *jh = bh2jh(bh); |
| |
| if (ext3_test_bit(nr, bh->b_data)) |
| return 0; |
| |
| jbd_lock_bh_state(bh); |
| if (!jh->b_committed_data) |
| ret = 1; |
| else |
| ret = !ext3_test_bit(nr, jh->b_committed_data); |
| jbd_unlock_bh_state(bh); |
| return ret; |
| } |
| |
| static int |
| bitmap_search_next_usable_block(int start, struct buffer_head *bh, |
| int maxblocks) |
| { |
| int next; |
| struct journal_head *jh = bh2jh(bh); |
| |
| /* |
| * The bitmap search --- search forward alternately through the actual |
| * bitmap and the last-committed copy until we find a bit free in |
| * both |
| */ |
| while (start < maxblocks) { |
| next = ext3_find_next_zero_bit(bh->b_data, maxblocks, start); |
| if (next >= maxblocks) |
| return -1; |
| if (ext3_test_allocatable(next, bh)) |
| return next; |
| jbd_lock_bh_state(bh); |
| if (jh->b_committed_data) |
| start = ext3_find_next_zero_bit(jh->b_committed_data, |
| maxblocks, next); |
| jbd_unlock_bh_state(bh); |
| } |
| return -1; |
| } |
| |
| /* |
| * Find an allocatable block in a bitmap. We honour both the bitmap and |
| * its last-committed copy (if that exists), and perform the "most |
| * appropriate allocation" algorithm of looking for a free block near |
| * the initial goal; then for a free byte somewhere in the bitmap; then |
| * for any free bit in the bitmap. |
| */ |
| static int |
| find_next_usable_block(int start, struct buffer_head *bh, int maxblocks) |
| { |
| int here, next; |
| char *p, *r; |
| |
| if (start > 0) { |
| /* |
| * The goal was occupied; search forward for a free |
| * block within the next XX blocks. |
| * |
| * end_goal is more or less random, but it has to be |
| * less than EXT3_BLOCKS_PER_GROUP. Aligning up to the |
| * next 64-bit boundary is simple.. |
| */ |
| int end_goal = (start + 63) & ~63; |
| if (end_goal > maxblocks) |
| end_goal = maxblocks; |
| here = ext3_find_next_zero_bit(bh->b_data, end_goal, start); |
| if (here < end_goal && ext3_test_allocatable(here, bh)) |
| return here; |
| ext3_debug("Bit not found near goal\n"); |
| } |
| |
| here = start; |
| if (here < 0) |
| here = 0; |
| |
| p = ((char *)bh->b_data) + (here >> 3); |
| r = memscan(p, 0, (maxblocks - here + 7) >> 3); |
| next = (r - ((char *)bh->b_data)) << 3; |
| |
| if (next < maxblocks && next >= start && ext3_test_allocatable(next, bh)) |
| return next; |
| |
| /* |
| * The bitmap search --- search forward alternately through the actual |
| * bitmap and the last-committed copy until we find a bit free in |
| * both |
| */ |
| here = bitmap_search_next_usable_block(here, bh, maxblocks); |
| return here; |
| } |
| |
| /* |
| * We think we can allocate this block in this bitmap. Try to set the bit. |
| * If that succeeds then check that nobody has allocated and then freed the |
| * block since we saw that is was not marked in b_committed_data. If it _was_ |
| * allocated and freed then clear the bit in the bitmap again and return |
| * zero (failure). |
| */ |
| static inline int |
| claim_block(spinlock_t *lock, int block, struct buffer_head *bh) |
| { |
| struct journal_head *jh = bh2jh(bh); |
| int ret; |
| |
| if (ext3_set_bit_atomic(lock, block, bh->b_data)) |
| return 0; |
| jbd_lock_bh_state(bh); |
| if (jh->b_committed_data && ext3_test_bit(block,jh->b_committed_data)) { |
| ext3_clear_bit_atomic(lock, block, bh->b_data); |
| ret = 0; |
| } else { |
| ret = 1; |
| } |
| jbd_unlock_bh_state(bh); |
| return ret; |
| } |
| |
| /* |
| * If we failed to allocate the desired block then we may end up crossing to a |
| * new bitmap. In that case we must release write access to the old one via |
| * ext3_journal_release_buffer(), else we'll run out of credits. |
| */ |
| static int |
| ext3_try_to_allocate(struct super_block *sb, handle_t *handle, int group, |
| struct buffer_head *bitmap_bh, int goal, struct ext3_reserve_window *my_rsv) |
| { |
| int group_first_block, start, end; |
| |
| /* we do allocation within the reservation window if we have a window */ |
| if (my_rsv) { |
| group_first_block = |
| le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block) + |
| group * EXT3_BLOCKS_PER_GROUP(sb); |
| if (my_rsv->_rsv_start >= group_first_block) |
| start = my_rsv->_rsv_start - group_first_block; |
| else |
| /* reservation window cross group boundary */ |
| start = 0; |
| end = my_rsv->_rsv_end - group_first_block + 1; |
| if (end > EXT3_BLOCKS_PER_GROUP(sb)) |
| /* reservation window crosses group boundary */ |
| end = EXT3_BLOCKS_PER_GROUP(sb); |
| if ((start <= goal) && (goal < end)) |
| start = goal; |
| else |
| goal = -1; |
| } else { |
| if (goal > 0) |
| start = goal; |
| else |
| start = 0; |
| end = EXT3_BLOCKS_PER_GROUP(sb); |
| } |
| |
| BUG_ON(start > EXT3_BLOCKS_PER_GROUP(sb)); |
| |
| repeat: |
| if (goal < 0 || !ext3_test_allocatable(goal, bitmap_bh)) { |
| goal = find_next_usable_block(start, bitmap_bh, end); |
| if (goal < 0) |
| goto fail_access; |
| if (!my_rsv) { |
| int i; |
| |
| for (i = 0; i < 7 && goal > start && |
| ext3_test_allocatable(goal - 1, |
| bitmap_bh); |
| i++, goal--) |
| ; |
| } |
| } |
| start = goal; |
| |
| if (!claim_block(sb_bgl_lock(EXT3_SB(sb), group), goal, bitmap_bh)) { |
| /* |
| * The block was allocated by another thread, or it was |
| * allocated and then freed by another thread |
| */ |
| start++; |
| goal++; |
| if (start >= end) |
| goto fail_access; |
| goto repeat; |
| } |
| return goal; |
| fail_access: |
| return -1; |
| } |
| |
| /** |
| * find_next_reservable_window(): |
| * find a reservable space within the given range. |
| * It does not allocate the reservation window for now: |
| * alloc_new_reservation() will do the work later. |
| * |
| * @search_head: the head of the searching list; |
| * This is not necessarily the list head of the whole filesystem |
| * |
| * We have both head and start_block to assist the search |
| * for the reservable space. The list starts from head, |
| * but we will shift to the place where start_block is, |
| * then start from there, when looking for a reservable space. |
| * |
| * @size: the target new reservation window size |
| * |
| * @group_first_block: the first block we consider to start |
| * the real search from |
| * |
| * @last_block: |
| * the maximum block number that our goal reservable space |
| * could start from. This is normally the last block in this |
| * group. The search will end when we found the start of next |
| * possible reservable space is out of this boundary. |
| * This could handle the cross boundary reservation window |
| * request. |
| * |
| * basically we search from the given range, rather than the whole |
| * reservation double linked list, (start_block, last_block) |
| * to find a free region that is of my size and has not |
| * been reserved. |
| * |
| */ |
| static int find_next_reservable_window( |
| struct ext3_reserve_window_node *search_head, |
| struct ext3_reserve_window_node *my_rsv, |
| struct super_block * sb, int start_block, |
| int last_block) |
| { |
| struct rb_node *next; |
| struct ext3_reserve_window_node *rsv, *prev; |
| int cur; |
| int size = my_rsv->rsv_goal_size; |
| |
| /* TODO: make the start of the reservation window byte-aligned */ |
| /* cur = *start_block & ~7;*/ |
| cur = start_block; |
| rsv = search_head; |
| if (!rsv) |
| return -1; |
| |
| while (1) { |
| if (cur <= rsv->rsv_end) |
| cur = rsv->rsv_end + 1; |
| |
| /* TODO? |
| * in the case we could not find a reservable space |
| * that is what is expected, during the re-search, we could |
| * remember what's the largest reservable space we could have |
| * and return that one. |
| * |
| * For now it will fail if we could not find the reservable |
| * space with expected-size (or more)... |
| */ |
| if (cur > last_block) |
| return -1; /* fail */ |
| |
| prev = rsv; |
| next = rb_next(&rsv->rsv_node); |
| rsv = list_entry(next,struct ext3_reserve_window_node,rsv_node); |
| |
| /* |
| * Reached the last reservation, we can just append to the |
| * previous one. |
| */ |
| if (!next) |
| break; |
| |
| if (cur + size <= rsv->rsv_start) { |
| /* |
| * Found a reserveable space big enough. We could |
| * have a reservation across the group boundary here |
| */ |
| break; |
| } |
| } |
| /* |
| * we come here either : |
| * when we reach the end of the whole list, |
| * and there is empty reservable space after last entry in the list. |
| * append it to the end of the list. |
| * |
| * or we found one reservable space in the middle of the list, |
| * return the reservation window that we could append to. |
| * succeed. |
| */ |
| |
| if ((prev != my_rsv) && (!rsv_is_empty(&my_rsv->rsv_window))) |
| rsv_window_remove(sb, my_rsv); |
| |
| /* |
| * Let's book the whole avaliable window for now. We will check the |
| * disk bitmap later and then, if there are free blocks then we adjust |
| * the window size if it's larger than requested. |
| * Otherwise, we will remove this node from the tree next time |
| * call find_next_reservable_window. |
| */ |
| my_rsv->rsv_start = cur; |
| my_rsv->rsv_end = cur + size - 1; |
| my_rsv->rsv_alloc_hit = 0; |
| |
| if (prev != my_rsv) |
| ext3_rsv_window_add(sb, my_rsv); |
| |
| return 0; |
| } |
| |
| /** |
| * alloc_new_reservation()--allocate a new reservation window |
| * |
| * To make a new reservation, we search part of the filesystem |
| * reservation list (the list that inside the group). We try to |
| * allocate a new reservation window near the allocation goal, |
| * or the beginning of the group, if there is no goal. |
| * |
| * We first find a reservable space after the goal, then from |
| * there, we check the bitmap for the first free block after |
| * it. If there is no free block until the end of group, then the |
| * whole group is full, we failed. Otherwise, check if the free |
| * block is inside the expected reservable space, if so, we |
| * succeed. |
| * If the first free block is outside the reservable space, then |
| * start from the first free block, we search for next available |
| * space, and go on. |
| * |
| * on succeed, a new reservation will be found and inserted into the list |
| * It contains at least one free block, and it does not overlap with other |
| * reservation windows. |
| * |
| * failed: we failed to find a reservation window in this group |
| * |
| * @rsv: the reservation |
| * |
| * @goal: The goal (group-relative). It is where the search for a |
| * free reservable space should start from. |
| * if we have a goal(goal >0 ), then start from there, |
| * no goal(goal = -1), we start from the first block |
| * of the group. |
| * |
| * @sb: the super block |
| * @group: the group we are trying to allocate in |
| * @bitmap_bh: the block group block bitmap |
| * |
| */ |
| static int alloc_new_reservation(struct ext3_reserve_window_node *my_rsv, |
| int goal, struct super_block *sb, |
| unsigned int group, struct buffer_head *bitmap_bh) |
| { |
| struct ext3_reserve_window_node *search_head; |
| int group_first_block, group_end_block, start_block; |
| int first_free_block; |
| struct rb_root *fs_rsv_root = &EXT3_SB(sb)->s_rsv_window_root; |
| unsigned long size; |
| int ret; |
| spinlock_t *rsv_lock = &EXT3_SB(sb)->s_rsv_window_lock; |
| |
| group_first_block = le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block) + |
| group * EXT3_BLOCKS_PER_GROUP(sb); |
| group_end_block = group_first_block + EXT3_BLOCKS_PER_GROUP(sb) - 1; |
| |
| if (goal < 0) |
| start_block = group_first_block; |
| else |
| start_block = goal + group_first_block; |
| |
| size = my_rsv->rsv_goal_size; |
| |
| if (!rsv_is_empty(&my_rsv->rsv_window)) { |
| /* |
| * if the old reservation is cross group boundary |
| * and if the goal is inside the old reservation window, |
| * we will come here when we just failed to allocate from |
| * the first part of the window. We still have another part |
| * that belongs to the next group. In this case, there is no |
| * point to discard our window and try to allocate a new one |
| * in this group(which will fail). we should |
| * keep the reservation window, just simply move on. |
| * |
| * Maybe we could shift the start block of the reservation |
| * window to the first block of next group. |
| */ |
| |
| if ((my_rsv->rsv_start <= group_end_block) && |
| (my_rsv->rsv_end > group_end_block) && |
| (start_block >= my_rsv->rsv_start)) |
| return -1; |
| |
| if ((my_rsv->rsv_alloc_hit > |
| (my_rsv->rsv_end - my_rsv->rsv_start + 1) / 2)) { |
| /* |
| * if we previously allocation hit ration is greater than half |
| * we double the size of reservation window next time |
| * otherwise keep the same |
| */ |
| size = size * 2; |
| if (size > EXT3_MAX_RESERVE_BLOCKS) |
| size = EXT3_MAX_RESERVE_BLOCKS; |
| my_rsv->rsv_goal_size= size; |
| } |
| } |
| |
| spin_lock(rsv_lock); |
| /* |
| * shift the search start to the window near the goal block |
| */ |
| search_head = search_reserve_window(fs_rsv_root, start_block); |
| |
| /* |
| * find_next_reservable_window() simply finds a reservable window |
| * inside the given range(start_block, group_end_block). |
| * |
| * To make sure the reservation window has a free bit inside it, we |
| * need to check the bitmap after we found a reservable window. |
| */ |
| retry: |
| ret = find_next_reservable_window(search_head, my_rsv, sb, |
| start_block, group_end_block); |
| |
| if (ret == -1) { |
| if (!rsv_is_empty(&my_rsv->rsv_window)) |
| rsv_window_remove(sb, my_rsv); |
| spin_unlock(rsv_lock); |
| return -1; |
| } |
| |
| /* |
| * On success, find_next_reservable_window() returns the |
| * reservation window where there is a reservable space after it. |
| * Before we reserve this reservable space, we need |
| * to make sure there is at least a free block inside this region. |
| * |
| * searching the first free bit on the block bitmap and copy of |
| * last committed bitmap alternatively, until we found a allocatable |
| * block. Search start from the start block of the reservable space |
| * we just found. |
| */ |
| spin_unlock(rsv_lock); |
| first_free_block = bitmap_search_next_usable_block( |
| my_rsv->rsv_start - group_first_block, |
| bitmap_bh, group_end_block - group_first_block + 1); |
| |
| if (first_free_block < 0) { |
| /* |
| * no free block left on the bitmap, no point |
| * to reserve the space. return failed. |
| */ |
| spin_lock(rsv_lock); |
| if (!rsv_is_empty(&my_rsv->rsv_window)) |
| rsv_window_remove(sb, my_rsv); |
| spin_unlock(rsv_lock); |
| return -1; /* failed */ |
| } |
| |
| start_block = first_free_block + group_first_block; |
| /* |
| * check if the first free block is within the |
| * free space we just reserved |
| */ |
| if (start_block >= my_rsv->rsv_start && start_block < my_rsv->rsv_end) |
| return 0; /* success */ |
| /* |
| * if the first free bit we found is out of the reservable space |
| * continue search for next reservable space, |
| * start from where the free block is, |
| * we also shift the list head to where we stopped last time |
| */ |
| search_head = my_rsv; |
| spin_lock(rsv_lock); |
| goto retry; |
| } |
| |
| /* |
| * This is the main function used to allocate a new block and its reservation |
| * window. |
| * |
| * Each time when a new block allocation is need, first try to allocate from |
| * its own reservation. If it does not have a reservation window, instead of |
| * looking for a free bit on bitmap first, then look up the reservation list to |
| * see if it is inside somebody else's reservation window, we try to allocate a |
| * reservation window for it starting from the goal first. Then do the block |
| * allocation within the reservation window. |
| * |
| * This will avoid keeping on searching the reservation list again and |
| * again when someboday is looking for a free block (without |
| * reservation), and there are lots of free blocks, but they are all |
| * being reserved. |
| * |
| * We use a sorted double linked list for the per-filesystem reservation list. |
| * The insert, remove and find a free space(non-reserved) operations for the |
| * sorted double linked list should be fast. |
| * |
| */ |
| static int |
| ext3_try_to_allocate_with_rsv(struct super_block *sb, handle_t *handle, |
| unsigned int group, struct buffer_head *bitmap_bh, |
| int goal, struct ext3_reserve_window_node * my_rsv, |
| int *errp) |
| { |
| unsigned long group_first_block; |
| int ret = 0; |
| int fatal; |
| |
| *errp = 0; |
| |
| /* |
| * Make sure we use undo access for the bitmap, because it is critical |
| * that we do the frozen_data COW on bitmap buffers in all cases even |
| * if the buffer is in BJ_Forget state in the committing transaction. |
| */ |
| BUFFER_TRACE(bitmap_bh, "get undo access for new block"); |
| fatal = ext3_journal_get_undo_access(handle, bitmap_bh); |
| if (fatal) { |
| *errp = fatal; |
| return -1; |
| } |
| |
| /* |
| * we don't deal with reservation when |
| * filesystem is mounted without reservation |
| * or the file is not a regular file |
| * or last attempt to allocate a block with reservation turned on failed |
| */ |
| if (my_rsv == NULL ) { |
| ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, goal, NULL); |
| goto out; |
| } |
| /* |
| * goal is a group relative block number (if there is a goal) |
| * 0 < goal < EXT3_BLOCKS_PER_GROUP(sb) |
| * first block is a filesystem wide block number |
| * first block is the block number of the first block in this group |
| */ |
| group_first_block = le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block) + |
| group * EXT3_BLOCKS_PER_GROUP(sb); |
| |
| /* |
| * Basically we will allocate a new block from inode's reservation |
| * window. |
| * |
| * We need to allocate a new reservation window, if: |
| * a) inode does not have a reservation window; or |
| * b) last attempt to allocate a block from existing reservation |
| * failed; or |
| * c) we come here with a goal and with a reservation window |
| * |
| * We do not need to allocate a new reservation window if we come here |
| * at the beginning with a goal and the goal is inside the window, or |
| * we don't have a goal but already have a reservation window. |
| * then we could go to allocate from the reservation window directly. |
| */ |
| while (1) { |
| if (rsv_is_empty(&my_rsv->rsv_window) || (ret < 0) || |
| !goal_in_my_reservation(&my_rsv->rsv_window, goal, group, sb)) { |
| ret = alloc_new_reservation(my_rsv, goal, sb, |
| group, bitmap_bh); |
| if (ret < 0) |
| break; /* failed */ |
| |
| if (!goal_in_my_reservation(&my_rsv->rsv_window, goal, group, sb)) |
| goal = -1; |
| } |
| if ((my_rsv->rsv_start >= group_first_block + EXT3_BLOCKS_PER_GROUP(sb)) |
| || (my_rsv->rsv_end < group_first_block)) |
| BUG(); |
| ret = ext3_try_to_allocate(sb, handle, group, bitmap_bh, goal, |
| &my_rsv->rsv_window); |
| if (ret >= 0) { |
| my_rsv->rsv_alloc_hit++; |
| break; /* succeed */ |
| } |
| } |
| out: |
| if (ret >= 0) { |
| BUFFER_TRACE(bitmap_bh, "journal_dirty_metadata for " |
| "bitmap block"); |
| fatal = ext3_journal_dirty_metadata(handle, bitmap_bh); |
| if (fatal) { |
| *errp = fatal; |
| return -1; |
| } |
| return ret; |
| } |
| |
| BUFFER_TRACE(bitmap_bh, "journal_release_buffer"); |
| ext3_journal_release_buffer(handle, bitmap_bh); |
| return ret; |
| } |
| |
| static int ext3_has_free_blocks(struct ext3_sb_info *sbi) |
| { |
| int free_blocks, root_blocks; |
| |
| free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter); |
| root_blocks = le32_to_cpu(sbi->s_es->s_r_blocks_count); |
| if (free_blocks < root_blocks + 1 && !capable(CAP_SYS_RESOURCE) && |
| sbi->s_resuid != current->fsuid && |
| (sbi->s_resgid == 0 || !in_group_p (sbi->s_resgid))) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* |
| * ext3_should_retry_alloc() is called when ENOSPC is returned, and if |
| * it is profitable to retry the operation, this function will wait |
| * for the current or commiting transaction to complete, and then |
| * return TRUE. |
| */ |
| int ext3_should_retry_alloc(struct super_block *sb, int *retries) |
| { |
| if (!ext3_has_free_blocks(EXT3_SB(sb)) || (*retries)++ > 3) |
| return 0; |
| |
| jbd_debug(1, "%s: retrying operation after ENOSPC\n", sb->s_id); |
| |
| return journal_force_commit_nested(EXT3_SB(sb)->s_journal); |
| } |
| |
| /* |
| * ext3_new_block uses a goal block to assist allocation. If the goal is |
| * free, or there is a free block within 32 blocks of the goal, that block |
| * is allocated. Otherwise a forward search is made for a free block; within |
| * each block group the search first looks for an entire free byte in the block |
| * bitmap, and then for any free bit if that fails. |
| * This function also updates quota and i_blocks field. |
| */ |
| int ext3_new_block(handle_t *handle, struct inode *inode, |
| unsigned long goal, int *errp) |
| { |
| struct buffer_head *bitmap_bh = NULL; |
| struct buffer_head *gdp_bh; |
| int group_no; |
| int goal_group; |
| int ret_block; |
| int bgi; /* blockgroup iteration index */ |
| int target_block; |
| int fatal = 0, err; |
| int performed_allocation = 0; |
| int free_blocks; |
| struct super_block *sb; |
| struct ext3_group_desc *gdp; |
| struct ext3_super_block *es; |
| struct ext3_sb_info *sbi; |
| struct ext3_reserve_window_node *my_rsv = NULL; |
| struct ext3_block_alloc_info *block_i; |
| unsigned short windowsz = 0; |
| #ifdef EXT3FS_DEBUG |
| static int goal_hits, goal_attempts; |
| #endif |
| unsigned long ngroups; |
| |
| *errp = -ENOSPC; |
| sb = inode->i_sb; |
| if (!sb) { |
| printk("ext3_new_block: nonexistent device"); |
| return 0; |
| } |
| |
| /* |
| * Check quota for allocation of this block. |
| */ |
| if (DQUOT_ALLOC_BLOCK(inode, 1)) { |
| *errp = -EDQUOT; |
| return 0; |
| } |
| |
| sbi = EXT3_SB(sb); |
| es = EXT3_SB(sb)->s_es; |
| ext3_debug("goal=%lu.\n", goal); |
| /* |
| * Allocate a block from reservation only when |
| * filesystem is mounted with reservation(default,-o reservation), and |
| * it's a regular file, and |
| * the desired window size is greater than 0 (One could use ioctl |
| * command EXT3_IOC_SETRSVSZ to set the window size to 0 to turn off |
| * reservation on that particular file) |
| */ |
| block_i = EXT3_I(inode)->i_block_alloc_info; |
| if (block_i && ((windowsz = block_i->rsv_window_node.rsv_goal_size) > 0)) |
| my_rsv = &block_i->rsv_window_node; |
| |
| if (!ext3_has_free_blocks(sbi)) { |
| *errp = -ENOSPC; |
| goto out; |
| } |
| |
| /* |
| * First, test whether the goal block is free. |
| */ |
| if (goal < le32_to_cpu(es->s_first_data_block) || |
| goal >= le32_to_cpu(es->s_blocks_count)) |
| goal = le32_to_cpu(es->s_first_data_block); |
| group_no = (goal - le32_to_cpu(es->s_first_data_block)) / |
| EXT3_BLOCKS_PER_GROUP(sb); |
| gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); |
| if (!gdp) |
| goto io_error; |
| |
| goal_group = group_no; |
| retry: |
| free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); |
| /* |
| * if there is not enough free blocks to make a new resevation |
| * turn off reservation for this allocation |
| */ |
| if (my_rsv && (free_blocks < windowsz) |
| && (rsv_is_empty(&my_rsv->rsv_window))) |
| my_rsv = NULL; |
| |
| if (free_blocks > 0) { |
| ret_block = ((goal - le32_to_cpu(es->s_first_data_block)) % |
| EXT3_BLOCKS_PER_GROUP(sb)); |
| bitmap_bh = read_block_bitmap(sb, group_no); |
| if (!bitmap_bh) |
| goto io_error; |
| ret_block = ext3_try_to_allocate_with_rsv(sb, handle, group_no, |
| bitmap_bh, ret_block, my_rsv, &fatal); |
| if (fatal) |
| goto out; |
| if (ret_block >= 0) |
| goto allocated; |
| } |
| |
| ngroups = EXT3_SB(sb)->s_groups_count; |
| smp_rmb(); |
| |
| /* |
| * Now search the rest of the groups. We assume that |
| * i and gdp correctly point to the last group visited. |
| */ |
| for (bgi = 0; bgi < ngroups; bgi++) { |
| group_no++; |
| if (group_no >= ngroups) |
| group_no = 0; |
| gdp = ext3_get_group_desc(sb, group_no, &gdp_bh); |
| if (!gdp) { |
| *errp = -EIO; |
| goto out; |
| } |
| free_blocks = le16_to_cpu(gdp->bg_free_blocks_count); |
| /* |
| * skip this group if the number of |
| * free blocks is less than half of the reservation |
| * window size. |
| */ |
| if (free_blocks <= (windowsz/2)) |
| continue; |
| |
| brelse(bitmap_bh); |
| bitmap_bh = read_block_bitmap(sb, group_no); |
| if (!bitmap_bh) |
| goto io_error; |
| ret_block = ext3_try_to_allocate_with_rsv(sb, handle, group_no, |
| bitmap_bh, -1, my_rsv, &fatal); |
| if (fatal) |
| goto out; |
| if (ret_block >= 0) |
| goto allocated; |
| } |
| /* |
| * We may end up a bogus ealier ENOSPC error due to |
| * filesystem is "full" of reservations, but |
| * there maybe indeed free blocks avaliable on disk |
| * In this case, we just forget about the reservations |
| * just do block allocation as without reservations. |
| */ |
| if (my_rsv) { |
| my_rsv = NULL; |
| group_no = goal_group; |
| goto retry; |
| } |
| /* No space left on the device */ |
| *errp = -ENOSPC; |
| goto out; |
| |
| allocated: |
| |
| ext3_debug("using block group %d(%d)\n", |
| group_no, gdp->bg_free_blocks_count); |
| |
| BUFFER_TRACE(gdp_bh, "get_write_access"); |
| fatal = ext3_journal_get_write_access(handle, gdp_bh); |
| if (fatal) |
| goto out; |
| |
| target_block = ret_block + group_no * EXT3_BLOCKS_PER_GROUP(sb) |
| + le32_to_cpu(es->s_first_data_block); |
| |
| if (target_block == le32_to_cpu(gdp->bg_block_bitmap) || |
| target_block == le32_to_cpu(gdp->bg_inode_bitmap) || |
| in_range(target_block, le32_to_cpu(gdp->bg_inode_table), |
| EXT3_SB(sb)->s_itb_per_group)) |
| ext3_error(sb, "ext3_new_block", |
| "Allocating block in system zone - " |
| "block = %u", target_block); |
| |
| performed_allocation = 1; |
| |
| #ifdef CONFIG_JBD_DEBUG |
| { |
| struct buffer_head *debug_bh; |
| |
| /* Record bitmap buffer state in the newly allocated block */ |
| debug_bh = sb_find_get_block(sb, target_block); |
| if (debug_bh) { |
| BUFFER_TRACE(debug_bh, "state when allocated"); |
| BUFFER_TRACE2(debug_bh, bitmap_bh, "bitmap state"); |
| brelse(debug_bh); |
| } |
| } |
| jbd_lock_bh_state(bitmap_bh); |
| spin_lock(sb_bgl_lock(sbi, group_no)); |
| if (buffer_jbd(bitmap_bh) && bh2jh(bitmap_bh)->b_committed_data) { |
| if (ext3_test_bit(ret_block, |
| bh2jh(bitmap_bh)->b_committed_data)) { |
| printk("%s: block was unexpectedly set in " |
| "b_committed_data\n", __FUNCTION__); |
| } |
| } |
| ext3_debug("found bit %d\n", ret_block); |
| spin_unlock(sb_bgl_lock(sbi, group_no)); |
| jbd_unlock_bh_state(bitmap_bh); |
| #endif |
| |
| /* ret_block was blockgroup-relative. Now it becomes fs-relative */ |
| ret_block = target_block; |
| |
| if (ret_block >= le32_to_cpu(es->s_blocks_count)) { |
| ext3_error(sb, "ext3_new_block", |
| "block(%d) >= blocks count(%d) - " |
| "block_group = %d, es == %p ", ret_block, |
| le32_to_cpu(es->s_blocks_count), group_no, es); |
| goto out; |
| } |
| |
| /* |
| * It is up to the caller to add the new buffer to a journal |
| * list of some description. We don't know in advance whether |
| * the caller wants to use it as metadata or data. |
| */ |
| ext3_debug("allocating block %d. Goal hits %d of %d.\n", |
| ret_block, goal_hits, goal_attempts); |
| |
| spin_lock(sb_bgl_lock(sbi, group_no)); |
| gdp->bg_free_blocks_count = |
| cpu_to_le16(le16_to_cpu(gdp->bg_free_blocks_count) - 1); |
| spin_unlock(sb_bgl_lock(sbi, group_no)); |
| percpu_counter_mod(&sbi->s_freeblocks_counter, -1); |
| |
| BUFFER_TRACE(gdp_bh, "journal_dirty_metadata for group descriptor"); |
| err = ext3_journal_dirty_metadata(handle, gdp_bh); |
| if (!fatal) |
| fatal = err; |
| |
| sb->s_dirt = 1; |
| if (fatal) |
| goto out; |
| |
| *errp = 0; |
| brelse(bitmap_bh); |
| return ret_block; |
| |
| io_error: |
| *errp = -EIO; |
| out: |
| if (fatal) { |
| *errp = fatal; |
| ext3_std_error(sb, fatal); |
| } |
| /* |
| * Undo the block allocation |
| */ |
| if (!performed_allocation) |
| DQUOT_FREE_BLOCK(inode, 1); |
| brelse(bitmap_bh); |
| return 0; |
| } |
| |
| unsigned long ext3_count_free_blocks(struct super_block *sb) |
| { |
| unsigned long desc_count; |
| struct ext3_group_desc *gdp; |
| int i; |
| unsigned long ngroups = EXT3_SB(sb)->s_groups_count; |
| #ifdef EXT3FS_DEBUG |
| struct ext3_super_block *es; |
| unsigned long bitmap_count, x; |
| struct buffer_head *bitmap_bh = NULL; |
| |
| lock_super(sb); |
| es = EXT3_SB(sb)->s_es; |
| desc_count = 0; |
| bitmap_count = 0; |
| gdp = NULL; |
| |
| for (i = 0; i < ngroups; i++) { |
| gdp = ext3_get_group_desc(sb, i, NULL); |
| if (!gdp) |
| continue; |
| desc_count += le16_to_cpu(gdp->bg_free_blocks_count); |
| brelse(bitmap_bh); |
| bitmap_bh = read_block_bitmap(sb, i); |
| if (bitmap_bh == NULL) |
| continue; |
| |
| x = ext3_count_free(bitmap_bh, sb->s_blocksize); |
| printk("group %d: stored = %d, counted = %lu\n", |
| i, le16_to_cpu(gdp->bg_free_blocks_count), x); |
| bitmap_count += x; |
| } |
| brelse(bitmap_bh); |
| printk("ext3_count_free_blocks: stored = %u, computed = %lu, %lu\n", |
| le32_to_cpu(es->s_free_blocks_count), desc_count, bitmap_count); |
| unlock_super(sb); |
| return bitmap_count; |
| #else |
| desc_count = 0; |
| smp_rmb(); |
| for (i = 0; i < ngroups; i++) { |
| gdp = ext3_get_group_desc(sb, i, NULL); |
| if (!gdp) |
| continue; |
| desc_count += le16_to_cpu(gdp->bg_free_blocks_count); |
| } |
| |
| return desc_count; |
| #endif |
| } |
| |
| static inline int |
| block_in_use(unsigned long block, struct super_block *sb, unsigned char *map) |
| { |
| return ext3_test_bit ((block - |
| le32_to_cpu(EXT3_SB(sb)->s_es->s_first_data_block)) % |
| EXT3_BLOCKS_PER_GROUP(sb), map); |
| } |
| |
| static inline int test_root(int a, int b) |
| { |
| int num = b; |
| |
| while (a > num) |
| num *= b; |
| return num == a; |
| } |
| |
| static int ext3_group_sparse(int group) |
| { |
| if (group <= 1) |
| return 1; |
| if (!(group & 1)) |
| return 0; |
| return (test_root(group, 7) || test_root(group, 5) || |
| test_root(group, 3)); |
| } |
| |
| /** |
| * ext3_bg_has_super - number of blocks used by the superblock in group |
| * @sb: superblock for filesystem |
| * @group: group number to check |
| * |
| * Return the number of blocks used by the superblock (primary or backup) |
| * in this group. Currently this will be only 0 or 1. |
| */ |
| int ext3_bg_has_super(struct super_block *sb, int group) |
| { |
| if (EXT3_HAS_RO_COMPAT_FEATURE(sb,EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)&& |
| !ext3_group_sparse(group)) |
| return 0; |
| return 1; |
| } |
| |
| /** |
| * ext3_bg_num_gdb - number of blocks used by the group table in group |
| * @sb: superblock for filesystem |
| * @group: group number to check |
| * |
| * Return the number of blocks used by the group descriptor table |
| * (primary or backup) in this group. In the future there may be a |
| * different number of descriptor blocks in each group. |
| */ |
| unsigned long ext3_bg_num_gdb(struct super_block *sb, int group) |
| { |
| if (EXT3_HAS_RO_COMPAT_FEATURE(sb,EXT3_FEATURE_RO_COMPAT_SPARSE_SUPER)&& |
| !ext3_group_sparse(group)) |
| return 0; |
| return EXT3_SB(sb)->s_gdb_count; |
| } |
| |
| #ifdef CONFIG_EXT3_CHECK |
| /* Called at mount-time, super-block is locked */ |
| void ext3_check_blocks_bitmap (struct super_block * sb) |
| { |
| struct ext3_super_block *es; |
| unsigned long desc_count, bitmap_count, x, j; |
| unsigned long desc_blocks; |
| struct buffer_head *bitmap_bh = NULL; |
| struct ext3_group_desc *gdp; |
| int i; |
| |
| es = EXT3_SB(sb)->s_es; |
| desc_count = 0; |
| bitmap_count = 0; |
| gdp = NULL; |
| for (i = 0; i < EXT3_SB(sb)->s_groups_count; i++) { |
| gdp = ext3_get_group_desc (sb, i, NULL); |
| if (!gdp) |
| continue; |
| desc_count += le16_to_cpu(gdp->bg_free_blocks_count); |
| brelse(bitmap_bh); |
| bitmap_bh = read_block_bitmap(sb, i); |
| if (bitmap_bh == NULL) |
| continue; |
| |
| if (ext3_bg_has_super(sb, i) && |
| !ext3_test_bit(0, bitmap_bh->b_data)) |
| ext3_error(sb, __FUNCTION__, |
| "Superblock in group %d is marked free", i); |
| |
| desc_blocks = ext3_bg_num_gdb(sb, i); |
| for (j = 0; j < desc_blocks; j++) |
| if (!ext3_test_bit(j + 1, bitmap_bh->b_data)) |
| ext3_error(sb, __FUNCTION__, |
| "Descriptor block #%ld in group " |
| "%d is marked free", j, i); |
| |
| if (!block_in_use (le32_to_cpu(gdp->bg_block_bitmap), |
| sb, bitmap_bh->b_data)) |
| ext3_error (sb, "ext3_check_blocks_bitmap", |
| "Block bitmap for group %d is marked free", |
| i); |
| |
| if (!block_in_use (le32_to_cpu(gdp->bg_inode_bitmap), |
| sb, bitmap_bh->b_data)) |
| ext3_error (sb, "ext3_check_blocks_bitmap", |
| "Inode bitmap for group %d is marked free", |
| i); |
| |
| for (j = 0; j < EXT3_SB(sb)->s_itb_per_group; j++) |
| if (!block_in_use (le32_to_cpu(gdp->bg_inode_table) + j, |
| sb, bitmap_bh->b_data)) |
| ext3_error (sb, "ext3_check_blocks_bitmap", |
| "Block #%d of the inode table in " |
| "group %d is marked free", j, i); |
| |
| x = ext3_count_free(bitmap_bh, sb->s_blocksize); |
| if (le16_to_cpu(gdp->bg_free_blocks_count) != x) |
| ext3_error (sb, "ext3_check_blocks_bitmap", |
| "Wrong free blocks count for group %d, " |
| "stored = %d, counted = %lu", i, |
| le16_to_cpu(gdp->bg_free_blocks_count), x); |
| bitmap_count += x; |
| } |
| brelse(bitmap_bh); |
| if (le32_to_cpu(es->s_free_blocks_count) != bitmap_count) |
| ext3_error (sb, "ext3_check_blocks_bitmap", |
| "Wrong free blocks count in super block, " |
| "stored = %lu, counted = %lu", |
| (unsigned long)le32_to_cpu(es->s_free_blocks_count), |
| bitmap_count); |
| } |
| #endif |