| /* |
| * PS3 gelic network driver. |
| * |
| * Copyright (C) 2007 Sony Computer Entertainment Inc. |
| * Copyright 2006, 2007 Sony Corporation |
| * |
| * This file is based on: spider_net.c |
| * |
| * (C) Copyright IBM Corp. 2005 |
| * |
| * Authors : Utz Bacher <utz.bacher@de.ibm.com> |
| * Jens Osterkamp <Jens.Osterkamp@de.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_vlan.h> |
| |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| |
| #include <linux/dma-mapping.h> |
| #include <net/checksum.h> |
| #include <asm/firmware.h> |
| #include <asm/ps3.h> |
| #include <asm/lv1call.h> |
| |
| #include "ps3_gelic_net.h" |
| #include "ps3_gelic_wireless.h" |
| |
| #define DRV_NAME "Gelic Network Driver" |
| #define DRV_VERSION "2.0" |
| |
| MODULE_AUTHOR("SCE Inc."); |
| MODULE_DESCRIPTION("Gelic Network driver"); |
| MODULE_LICENSE("GPL"); |
| |
| |
| static inline void gelic_card_enable_rxdmac(struct gelic_card *card); |
| static inline void gelic_card_disable_rxdmac(struct gelic_card *card); |
| static inline void gelic_card_disable_txdmac(struct gelic_card *card); |
| static inline void gelic_card_reset_chain(struct gelic_card *card, |
| struct gelic_descr_chain *chain, |
| struct gelic_descr *start_descr); |
| |
| /* set irq_mask */ |
| int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask) |
| { |
| int status; |
| |
| status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card), |
| mask, 0); |
| if (status) |
| dev_info(ctodev(card), |
| "%s failed %d\n", __func__, status); |
| return status; |
| } |
| |
| static inline void gelic_card_rx_irq_on(struct gelic_card *card) |
| { |
| card->irq_mask |= GELIC_CARD_RXINT; |
| gelic_card_set_irq_mask(card, card->irq_mask); |
| } |
| static inline void gelic_card_rx_irq_off(struct gelic_card *card) |
| { |
| card->irq_mask &= ~GELIC_CARD_RXINT; |
| gelic_card_set_irq_mask(card, card->irq_mask); |
| } |
| |
| static void gelic_card_get_ether_port_status(struct gelic_card *card, |
| int inform) |
| { |
| u64 v2; |
| struct net_device *ether_netdev; |
| |
| lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_GET_ETH_PORT_STATUS, |
| GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0, |
| &card->ether_port_status, &v2); |
| |
| if (inform) { |
| ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0]; |
| if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP) |
| netif_carrier_on(ether_netdev); |
| else |
| netif_carrier_off(ether_netdev); |
| } |
| } |
| |
| static int gelic_card_set_link_mode(struct gelic_card *card, int mode) |
| { |
| int status; |
| u64 v1, v2; |
| |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_SET_NEGOTIATION_MODE, |
| GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2); |
| if (status) { |
| pr_info("%s: failed setting negotiation mode %d\n", __func__, |
| status); |
| return -EBUSY; |
| } |
| |
| card->link_mode = mode; |
| return 0; |
| } |
| |
| void gelic_card_up(struct gelic_card *card) |
| { |
| pr_debug("%s: called\n", __func__); |
| mutex_lock(&card->updown_lock); |
| if (atomic_inc_return(&card->users) == 1) { |
| pr_debug("%s: real do\n", __func__); |
| /* enable irq */ |
| gelic_card_set_irq_mask(card, card->irq_mask); |
| /* start rx */ |
| gelic_card_enable_rxdmac(card); |
| |
| napi_enable(&card->napi); |
| } |
| mutex_unlock(&card->updown_lock); |
| pr_debug("%s: done\n", __func__); |
| } |
| |
| void gelic_card_down(struct gelic_card *card) |
| { |
| u64 mask; |
| pr_debug("%s: called\n", __func__); |
| mutex_lock(&card->updown_lock); |
| if (atomic_dec_if_positive(&card->users) == 0) { |
| pr_debug("%s: real do\n", __func__); |
| napi_disable(&card->napi); |
| /* |
| * Disable irq. Wireless interrupts will |
| * be disabled later if any |
| */ |
| mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED | |
| GELIC_CARD_WLAN_COMMAND_COMPLETED); |
| gelic_card_set_irq_mask(card, mask); |
| /* stop rx */ |
| gelic_card_disable_rxdmac(card); |
| gelic_card_reset_chain(card, &card->rx_chain, |
| card->descr + GELIC_NET_TX_DESCRIPTORS); |
| /* stop tx */ |
| gelic_card_disable_txdmac(card); |
| } |
| mutex_unlock(&card->updown_lock); |
| pr_debug("%s: done\n", __func__); |
| } |
| |
| /** |
| * gelic_descr_get_status -- returns the status of a descriptor |
| * @descr: descriptor to look at |
| * |
| * returns the status as in the dmac_cmd_status field of the descriptor |
| */ |
| static enum gelic_descr_dma_status |
| gelic_descr_get_status(struct gelic_descr *descr) |
| { |
| return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK; |
| } |
| |
| /** |
| * gelic_descr_set_status -- sets the status of a descriptor |
| * @descr: descriptor to change |
| * @status: status to set in the descriptor |
| * |
| * changes the status to the specified value. Doesn't change other bits |
| * in the status |
| */ |
| static void gelic_descr_set_status(struct gelic_descr *descr, |
| enum gelic_descr_dma_status status) |
| { |
| descr->dmac_cmd_status = cpu_to_be32(status | |
| (be32_to_cpu(descr->dmac_cmd_status) & |
| ~GELIC_DESCR_DMA_STAT_MASK)); |
| /* |
| * dma_cmd_status field is used to indicate whether the descriptor |
| * is valid or not. |
| * Usually caller of this function wants to inform that to the |
| * hardware, so we assure here the hardware sees the change. |
| */ |
| wmb(); |
| } |
| |
| /** |
| * gelic_card_free_chain - free descriptor chain |
| * @card: card structure |
| * @descr_in: address of desc |
| */ |
| static void gelic_card_free_chain(struct gelic_card *card, |
| struct gelic_descr *descr_in) |
| { |
| struct gelic_descr *descr; |
| |
| for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) { |
| dma_unmap_single(ctodev(card), descr->bus_addr, |
| GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL); |
| descr->bus_addr = 0; |
| } |
| } |
| |
| /** |
| * gelic_card_init_chain - links descriptor chain |
| * @card: card structure |
| * @chain: address of chain |
| * @start_descr: address of descriptor array |
| * @no: number of descriptors |
| * |
| * we manage a circular list that mirrors the hardware structure, |
| * except that the hardware uses bus addresses. |
| * |
| * returns 0 on success, <0 on failure |
| */ |
| static int __devinit gelic_card_init_chain(struct gelic_card *card, |
| struct gelic_descr_chain *chain, |
| struct gelic_descr *start_descr, |
| int no) |
| { |
| int i; |
| struct gelic_descr *descr; |
| |
| descr = start_descr; |
| memset(descr, 0, sizeof(*descr) * no); |
| |
| /* set up the hardware pointers in each descriptor */ |
| for (i = 0; i < no; i++, descr++) { |
| gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); |
| descr->bus_addr = |
| dma_map_single(ctodev(card), descr, |
| GELIC_DESCR_SIZE, |
| DMA_BIDIRECTIONAL); |
| |
| if (!descr->bus_addr) |
| goto iommu_error; |
| |
| descr->next = descr + 1; |
| descr->prev = descr - 1; |
| } |
| /* make them as ring */ |
| (descr - 1)->next = start_descr; |
| start_descr->prev = (descr - 1); |
| |
| /* chain bus addr of hw descriptor */ |
| descr = start_descr; |
| for (i = 0; i < no; i++, descr++) { |
| descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr); |
| } |
| |
| chain->head = start_descr; |
| chain->tail = start_descr; |
| |
| /* do not chain last hw descriptor */ |
| (descr - 1)->next_descr_addr = 0; |
| |
| return 0; |
| |
| iommu_error: |
| for (i--, descr--; 0 <= i; i--, descr--) |
| if (descr->bus_addr) |
| dma_unmap_single(ctodev(card), descr->bus_addr, |
| GELIC_DESCR_SIZE, |
| DMA_BIDIRECTIONAL); |
| return -ENOMEM; |
| } |
| |
| /** |
| * gelic_card_reset_chain - reset status of a descriptor chain |
| * @card: card structure |
| * @chain: address of chain |
| * @start_descr: address of descriptor array |
| * |
| * Reset the status of dma descriptors to ready state |
| * and re-initialize the hardware chain for later use |
| */ |
| static void gelic_card_reset_chain(struct gelic_card *card, |
| struct gelic_descr_chain *chain, |
| struct gelic_descr *start_descr) |
| { |
| struct gelic_descr *descr; |
| |
| for (descr = start_descr; start_descr != descr->next; descr++) { |
| gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED); |
| descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr); |
| } |
| |
| chain->head = start_descr; |
| chain->tail = (descr - 1); |
| |
| (descr - 1)->next_descr_addr = 0; |
| } |
| /** |
| * gelic_descr_prepare_rx - reinitializes a rx descriptor |
| * @card: card structure |
| * @descr: descriptor to re-init |
| * |
| * return 0 on succes, <0 on failure |
| * |
| * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. |
| * Activate the descriptor state-wise |
| */ |
| static int gelic_descr_prepare_rx(struct gelic_card *card, |
| struct gelic_descr *descr) |
| { |
| int offset; |
| unsigned int bufsize; |
| |
| if (gelic_descr_get_status(descr) != GELIC_DESCR_DMA_NOT_IN_USE) |
| dev_info(ctodev(card), "%s: ERROR status \n", __func__); |
| /* we need to round up the buffer size to a multiple of 128 */ |
| bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN); |
| |
| /* and we need to have it 128 byte aligned, therefore we allocate a |
| * bit more */ |
| descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1); |
| if (!descr->skb) { |
| descr->buf_addr = 0; /* tell DMAC don't touch memory */ |
| dev_info(ctodev(card), |
| "%s:allocate skb failed !!\n", __func__); |
| return -ENOMEM; |
| } |
| descr->buf_size = cpu_to_be32(bufsize); |
| descr->dmac_cmd_status = 0; |
| descr->result_size = 0; |
| descr->valid_size = 0; |
| descr->data_error = 0; |
| |
| offset = ((unsigned long)descr->skb->data) & |
| (GELIC_NET_RXBUF_ALIGN - 1); |
| if (offset) |
| skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset); |
| /* io-mmu-map the skb */ |
| descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card), |
| descr->skb->data, |
| GELIC_NET_MAX_MTU, |
| DMA_FROM_DEVICE)); |
| if (!descr->buf_addr) { |
| dev_kfree_skb_any(descr->skb); |
| descr->skb = NULL; |
| dev_info(ctodev(card), |
| "%s:Could not iommu-map rx buffer\n", __func__); |
| gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); |
| return -ENOMEM; |
| } else { |
| gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED); |
| return 0; |
| } |
| } |
| |
| /** |
| * gelic_card_release_rx_chain - free all skb of rx descr |
| * @card: card structure |
| * |
| */ |
| static void gelic_card_release_rx_chain(struct gelic_card *card) |
| { |
| struct gelic_descr *descr = card->rx_chain.head; |
| |
| do { |
| if (descr->skb) { |
| dma_unmap_single(ctodev(card), |
| be32_to_cpu(descr->buf_addr), |
| descr->skb->len, |
| DMA_FROM_DEVICE); |
| descr->buf_addr = 0; |
| dev_kfree_skb_any(descr->skb); |
| descr->skb = NULL; |
| gelic_descr_set_status(descr, |
| GELIC_DESCR_DMA_NOT_IN_USE); |
| } |
| descr = descr->next; |
| } while (descr != card->rx_chain.head); |
| } |
| |
| /** |
| * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains |
| * @card: card structure |
| * |
| * fills all descriptors in the rx chain: allocates skbs |
| * and iommu-maps them. |
| * returns 0 on success, < 0 on failure |
| */ |
| static int gelic_card_fill_rx_chain(struct gelic_card *card) |
| { |
| struct gelic_descr *descr = card->rx_chain.head; |
| int ret; |
| |
| do { |
| if (!descr->skb) { |
| ret = gelic_descr_prepare_rx(card, descr); |
| if (ret) |
| goto rewind; |
| } |
| descr = descr->next; |
| } while (descr != card->rx_chain.head); |
| |
| return 0; |
| rewind: |
| gelic_card_release_rx_chain(card); |
| return ret; |
| } |
| |
| /** |
| * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains |
| * @card: card structure |
| * |
| * returns 0 on success, < 0 on failure |
| */ |
| static int __devinit gelic_card_alloc_rx_skbs(struct gelic_card *card) |
| { |
| struct gelic_descr_chain *chain; |
| int ret; |
| chain = &card->rx_chain; |
| ret = gelic_card_fill_rx_chain(card); |
| chain->tail = card->rx_top->prev; /* point to the last */ |
| return ret; |
| } |
| |
| /** |
| * gelic_descr_release_tx - processes a used tx descriptor |
| * @card: card structure |
| * @descr: descriptor to release |
| * |
| * releases a used tx descriptor (unmapping, freeing of skb) |
| */ |
| static void gelic_descr_release_tx(struct gelic_card *card, |
| struct gelic_descr *descr) |
| { |
| struct sk_buff *skb = descr->skb; |
| |
| BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL)); |
| |
| dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len, |
| DMA_TO_DEVICE); |
| dev_kfree_skb_any(skb); |
| |
| descr->buf_addr = 0; |
| descr->buf_size = 0; |
| descr->next_descr_addr = 0; |
| descr->result_size = 0; |
| descr->valid_size = 0; |
| descr->data_status = 0; |
| descr->data_error = 0; |
| descr->skb = NULL; |
| |
| /* set descr status */ |
| gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); |
| } |
| |
| static void gelic_card_stop_queues(struct gelic_card *card) |
| { |
| netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]); |
| |
| if (card->netdev[GELIC_PORT_WIRELESS]) |
| netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]); |
| } |
| static void gelic_card_wake_queues(struct gelic_card *card) |
| { |
| netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]); |
| |
| if (card->netdev[GELIC_PORT_WIRELESS]) |
| netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]); |
| } |
| /** |
| * gelic_card_release_tx_chain - processes sent tx descriptors |
| * @card: adapter structure |
| * @stop: net_stop sequence |
| * |
| * releases the tx descriptors that gelic has finished with |
| */ |
| static void gelic_card_release_tx_chain(struct gelic_card *card, int stop) |
| { |
| struct gelic_descr_chain *tx_chain; |
| enum gelic_descr_dma_status status; |
| struct net_device *netdev; |
| int release = 0; |
| |
| for (tx_chain = &card->tx_chain; |
| tx_chain->head != tx_chain->tail && tx_chain->tail; |
| tx_chain->tail = tx_chain->tail->next) { |
| status = gelic_descr_get_status(tx_chain->tail); |
| netdev = tx_chain->tail->skb->dev; |
| switch (status) { |
| case GELIC_DESCR_DMA_RESPONSE_ERROR: |
| case GELIC_DESCR_DMA_PROTECTION_ERROR: |
| case GELIC_DESCR_DMA_FORCE_END: |
| if (printk_ratelimit()) |
| dev_info(ctodev(card), |
| "%s: forcing end of tx descriptor " \ |
| "with status %x\n", |
| __func__, status); |
| netdev->stats.tx_dropped++; |
| break; |
| |
| case GELIC_DESCR_DMA_COMPLETE: |
| if (tx_chain->tail->skb) { |
| netdev->stats.tx_packets++; |
| netdev->stats.tx_bytes += |
| tx_chain->tail->skb->len; |
| } |
| break; |
| |
| case GELIC_DESCR_DMA_CARDOWNED: |
| /* pending tx request */ |
| default: |
| /* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */ |
| if (!stop) |
| goto out; |
| } |
| gelic_descr_release_tx(card, tx_chain->tail); |
| release ++; |
| } |
| out: |
| if (!stop && release) |
| gelic_card_wake_queues(card); |
| } |
| |
| /** |
| * gelic_net_set_multi - sets multicast addresses and promisc flags |
| * @netdev: interface device structure |
| * |
| * gelic_net_set_multi configures multicast addresses as needed for the |
| * netdev interface. It also sets up multicast, allmulti and promisc |
| * flags appropriately |
| */ |
| void gelic_net_set_multi(struct net_device *netdev) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| struct dev_mc_list *mc; |
| unsigned int i; |
| uint8_t *p; |
| u64 addr; |
| int status; |
| |
| /* clear all multicast address */ |
| status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card), |
| 0, 1); |
| if (status) |
| dev_err(ctodev(card), |
| "lv1_net_remove_multicast_address failed %d\n", |
| status); |
| /* set broadcast address */ |
| status = lv1_net_add_multicast_address(bus_id(card), dev_id(card), |
| GELIC_NET_BROADCAST_ADDR, 0); |
| if (status) |
| dev_err(ctodev(card), |
| "lv1_net_add_multicast_address failed, %d\n", |
| status); |
| |
| if ((netdev->flags & IFF_ALLMULTI) || |
| (netdev->mc_count > GELIC_NET_MC_COUNT_MAX)) { |
| status = lv1_net_add_multicast_address(bus_id(card), |
| dev_id(card), |
| 0, 1); |
| if (status) |
| dev_err(ctodev(card), |
| "lv1_net_add_multicast_address failed, %d\n", |
| status); |
| return; |
| } |
| |
| /* set multicast addresses */ |
| for (mc = netdev->mc_list; mc; mc = mc->next) { |
| addr = 0; |
| p = mc->dmi_addr; |
| for (i = 0; i < ETH_ALEN; i++) { |
| addr <<= 8; |
| addr |= *p++; |
| } |
| status = lv1_net_add_multicast_address(bus_id(card), |
| dev_id(card), |
| addr, 0); |
| if (status) |
| dev_err(ctodev(card), |
| "lv1_net_add_multicast_address failed, %d\n", |
| status); |
| } |
| } |
| |
| /** |
| * gelic_card_enable_rxdmac - enables the receive DMA controller |
| * @card: card structure |
| * |
| * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN |
| * in the GDADMACCNTR register |
| */ |
| static inline void gelic_card_enable_rxdmac(struct gelic_card *card) |
| { |
| int status; |
| |
| #ifdef DEBUG |
| if (gelic_descr_get_status(card->rx_chain.head) != |
| GELIC_DESCR_DMA_CARDOWNED) { |
| printk(KERN_ERR "%s: status=%x\n", __func__, |
| be32_to_cpu(card->rx_chain.head->dmac_cmd_status)); |
| printk(KERN_ERR "%s: nextphy=%x\n", __func__, |
| be32_to_cpu(card->rx_chain.head->next_descr_addr)); |
| printk(KERN_ERR "%s: head=%p\n", __func__, |
| card->rx_chain.head); |
| } |
| #endif |
| status = lv1_net_start_rx_dma(bus_id(card), dev_id(card), |
| card->rx_chain.head->bus_addr, 0); |
| if (status) |
| dev_info(ctodev(card), |
| "lv1_net_start_rx_dma failed, status=%d\n", status); |
| } |
| |
| /** |
| * gelic_card_disable_rxdmac - disables the receive DMA controller |
| * @card: card structure |
| * |
| * gelic_card_disable_rxdmac terminates processing on the DMA controller by |
| * turing off DMA and issueing a force end |
| */ |
| static inline void gelic_card_disable_rxdmac(struct gelic_card *card) |
| { |
| int status; |
| |
| /* this hvc blocks until the DMA in progress really stopped */ |
| status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0); |
| if (status) |
| dev_err(ctodev(card), |
| "lv1_net_stop_rx_dma faild, %d\n", status); |
| } |
| |
| /** |
| * gelic_card_disable_txdmac - disables the transmit DMA controller |
| * @card: card structure |
| * |
| * gelic_card_disable_txdmac terminates processing on the DMA controller by |
| * turing off DMA and issueing a force end |
| */ |
| static inline void gelic_card_disable_txdmac(struct gelic_card *card) |
| { |
| int status; |
| |
| /* this hvc blocks until the DMA in progress really stopped */ |
| status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0); |
| if (status) |
| dev_err(ctodev(card), |
| "lv1_net_stop_tx_dma faild, status=%d\n", status); |
| } |
| |
| /** |
| * gelic_net_stop - called upon ifconfig down |
| * @netdev: interface device structure |
| * |
| * always returns 0 |
| */ |
| int gelic_net_stop(struct net_device *netdev) |
| { |
| struct gelic_card *card; |
| |
| pr_debug("%s: start\n", __func__); |
| |
| netif_stop_queue(netdev); |
| netif_carrier_off(netdev); |
| |
| card = netdev_card(netdev); |
| gelic_card_down(card); |
| |
| pr_debug("%s: done\n", __func__); |
| return 0; |
| } |
| |
| /** |
| * gelic_card_get_next_tx_descr - returns the next available tx descriptor |
| * @card: device structure to get descriptor from |
| * |
| * returns the address of the next descriptor, or NULL if not available. |
| */ |
| static struct gelic_descr * |
| gelic_card_get_next_tx_descr(struct gelic_card *card) |
| { |
| if (!card->tx_chain.head) |
| return NULL; |
| /* see if the next descriptor is free */ |
| if (card->tx_chain.tail != card->tx_chain.head->next && |
| gelic_descr_get_status(card->tx_chain.head) == |
| GELIC_DESCR_DMA_NOT_IN_USE) |
| return card->tx_chain.head; |
| else |
| return NULL; |
| |
| } |
| |
| /** |
| * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field |
| * @descr: descriptor structure to fill out |
| * @skb: packet to consider |
| * |
| * fills out the command and status field of the descriptor structure, |
| * depending on hardware checksum settings. This function assumes a wmb() |
| * has executed before. |
| */ |
| static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr, |
| struct sk_buff *skb) |
| { |
| if (skb->ip_summed != CHECKSUM_PARTIAL) |
| descr->dmac_cmd_status = |
| cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM | |
| GELIC_DESCR_TX_DMA_FRAME_TAIL); |
| else { |
| /* is packet ip? |
| * if yes: tcp? udp? */ |
| if (skb->protocol == htons(ETH_P_IP)) { |
| if (ip_hdr(skb)->protocol == IPPROTO_TCP) |
| descr->dmac_cmd_status = |
| cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM | |
| GELIC_DESCR_TX_DMA_FRAME_TAIL); |
| |
| else if (ip_hdr(skb)->protocol == IPPROTO_UDP) |
| descr->dmac_cmd_status = |
| cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM | |
| GELIC_DESCR_TX_DMA_FRAME_TAIL); |
| else /* |
| * the stack should checksum non-tcp and non-udp |
| * packets on his own: NETIF_F_IP_CSUM |
| */ |
| descr->dmac_cmd_status = |
| cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM | |
| GELIC_DESCR_TX_DMA_FRAME_TAIL); |
| } |
| } |
| } |
| |
| static inline struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb, |
| unsigned short tag) |
| { |
| struct vlan_ethhdr *veth; |
| static unsigned int c; |
| |
| if (skb_headroom(skb) < VLAN_HLEN) { |
| struct sk_buff *sk_tmp = skb; |
| pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c); |
| skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN); |
| if (!skb) |
| return NULL; |
| dev_kfree_skb_any(sk_tmp); |
| } |
| veth = (struct vlan_ethhdr *)skb_push(skb, VLAN_HLEN); |
| |
| /* Move the mac addresses to the top of buffer */ |
| memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN); |
| |
| veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q); |
| veth->h_vlan_TCI = htons(tag); |
| |
| return skb; |
| } |
| |
| /** |
| * gelic_descr_prepare_tx - setup a descriptor for sending packets |
| * @card: card structure |
| * @descr: descriptor structure |
| * @skb: packet to use |
| * |
| * returns 0 on success, <0 on failure. |
| * |
| */ |
| static int gelic_descr_prepare_tx(struct gelic_card *card, |
| struct gelic_descr *descr, |
| struct sk_buff *skb) |
| { |
| dma_addr_t buf; |
| |
| if (card->vlan_required) { |
| struct sk_buff *skb_tmp; |
| enum gelic_port_type type; |
| |
| type = netdev_port(skb->dev)->type; |
| skb_tmp = gelic_put_vlan_tag(skb, |
| card->vlan[type].tx); |
| if (!skb_tmp) |
| return -ENOMEM; |
| skb = skb_tmp; |
| } |
| |
| buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE); |
| |
| if (!buf) { |
| dev_err(ctodev(card), |
| "dma map 2 failed (%p, %i). Dropping packet\n", |
| skb->data, skb->len); |
| return -ENOMEM; |
| } |
| |
| descr->buf_addr = cpu_to_be32(buf); |
| descr->buf_size = cpu_to_be32(skb->len); |
| descr->skb = skb; |
| descr->data_status = 0; |
| descr->next_descr_addr = 0; /* terminate hw descr */ |
| gelic_descr_set_tx_cmdstat(descr, skb); |
| |
| /* bump free descriptor pointer */ |
| card->tx_chain.head = descr->next; |
| return 0; |
| } |
| |
| /** |
| * gelic_card_kick_txdma - enables TX DMA processing |
| * @card: card structure |
| * @descr: descriptor address to enable TX processing at |
| * |
| */ |
| static int gelic_card_kick_txdma(struct gelic_card *card, |
| struct gelic_descr *descr) |
| { |
| int status = 0; |
| |
| if (card->tx_dma_progress) |
| return 0; |
| |
| if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) { |
| card->tx_dma_progress = 1; |
| status = lv1_net_start_tx_dma(bus_id(card), dev_id(card), |
| descr->bus_addr, 0); |
| if (status) |
| dev_info(ctodev(card), "lv1_net_start_txdma failed," \ |
| "status=%d\n", status); |
| } |
| return status; |
| } |
| |
| /** |
| * gelic_net_xmit - transmits a frame over the device |
| * @skb: packet to send out |
| * @netdev: interface device structure |
| * |
| * returns 0 on success, <0 on failure |
| */ |
| int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| struct gelic_descr *descr; |
| int result; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&card->tx_lock, flags); |
| |
| gelic_card_release_tx_chain(card, 0); |
| |
| descr = gelic_card_get_next_tx_descr(card); |
| if (!descr) { |
| /* |
| * no more descriptors free |
| */ |
| gelic_card_stop_queues(card); |
| spin_unlock_irqrestore(&card->tx_lock, flags); |
| return NETDEV_TX_BUSY; |
| } |
| |
| result = gelic_descr_prepare_tx(card, descr, skb); |
| if (result) { |
| /* |
| * DMA map failed. As chanses are that failure |
| * would continue, just release skb and return |
| */ |
| netdev->stats.tx_dropped++; |
| dev_kfree_skb_any(skb); |
| spin_unlock_irqrestore(&card->tx_lock, flags); |
| return NETDEV_TX_OK; |
| } |
| /* |
| * link this prepared descriptor to previous one |
| * to achieve high performance |
| */ |
| descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr); |
| /* |
| * as hardware descriptor is modified in the above lines, |
| * ensure that the hardware sees it |
| */ |
| wmb(); |
| if (gelic_card_kick_txdma(card, descr)) { |
| /* |
| * kick failed. |
| * release descriptors which were just prepared |
| */ |
| netdev->stats.tx_dropped++; |
| gelic_descr_release_tx(card, descr); |
| gelic_descr_release_tx(card, descr->next); |
| card->tx_chain.tail = descr->next->next; |
| dev_info(ctodev(card), "%s: kick failure\n", __func__); |
| } else { |
| /* OK, DMA started/reserved */ |
| netdev->trans_start = jiffies; |
| } |
| |
| spin_unlock_irqrestore(&card->tx_lock, flags); |
| return NETDEV_TX_OK; |
| } |
| |
| /** |
| * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on |
| * @descr: descriptor to process |
| * @card: card structure |
| * @netdev: net_device structure to be passed packet |
| * |
| * iommu-unmaps the skb, fills out skb structure and passes the data to the |
| * stack. The descriptor state is not changed. |
| */ |
| static void gelic_net_pass_skb_up(struct gelic_descr *descr, |
| struct gelic_card *card, |
| struct net_device *netdev) |
| |
| { |
| struct sk_buff *skb = descr->skb; |
| u32 data_status, data_error; |
| |
| data_status = be32_to_cpu(descr->data_status); |
| data_error = be32_to_cpu(descr->data_error); |
| /* unmap skb buffer */ |
| dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), |
| GELIC_NET_MAX_MTU, |
| DMA_FROM_DEVICE); |
| |
| skb_put(skb, be32_to_cpu(descr->valid_size)? |
| be32_to_cpu(descr->valid_size) : |
| be32_to_cpu(descr->result_size)); |
| if (!descr->valid_size) |
| dev_info(ctodev(card), "buffer full %x %x %x\n", |
| be32_to_cpu(descr->result_size), |
| be32_to_cpu(descr->buf_size), |
| be32_to_cpu(descr->dmac_cmd_status)); |
| |
| descr->skb = NULL; |
| /* |
| * the card put 2 bytes vlan tag in front |
| * of the ethernet frame |
| */ |
| skb_pull(skb, 2); |
| skb->protocol = eth_type_trans(skb, netdev); |
| |
| /* checksum offload */ |
| if (card->rx_csum) { |
| if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) && |
| (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK))) |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| else |
| skb->ip_summed = CHECKSUM_NONE; |
| } else |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| /* update netdevice statistics */ |
| netdev->stats.rx_packets++; |
| netdev->stats.rx_bytes += skb->len; |
| |
| /* pass skb up to stack */ |
| netif_receive_skb(skb); |
| } |
| |
| /** |
| * gelic_card_decode_one_descr - processes an rx descriptor |
| * @card: card structure |
| * |
| * returns 1 if a packet has been sent to the stack, otherwise 0 |
| * |
| * processes an rx descriptor by iommu-unmapping the data buffer and passing |
| * the packet up to the stack |
| */ |
| static int gelic_card_decode_one_descr(struct gelic_card *card) |
| { |
| enum gelic_descr_dma_status status; |
| struct gelic_descr_chain *chain = &card->rx_chain; |
| struct gelic_descr *descr = chain->head; |
| struct net_device *netdev = NULL; |
| int dmac_chain_ended; |
| |
| status = gelic_descr_get_status(descr); |
| /* is this descriptor terminated with next_descr == NULL? */ |
| dmac_chain_ended = |
| be32_to_cpu(descr->dmac_cmd_status) & |
| GELIC_DESCR_RX_DMA_CHAIN_END; |
| |
| if (status == GELIC_DESCR_DMA_CARDOWNED) |
| return 0; |
| |
| if (status == GELIC_DESCR_DMA_NOT_IN_USE) { |
| dev_dbg(ctodev(card), "dormant descr? %p\n", descr); |
| return 0; |
| } |
| |
| /* netdevice select */ |
| if (card->vlan_required) { |
| unsigned int i; |
| u16 vid; |
| vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK; |
| for (i = 0; i < GELIC_PORT_MAX; i++) { |
| if (card->vlan[i].rx == vid) { |
| netdev = card->netdev[i]; |
| break; |
| } |
| }; |
| if (GELIC_PORT_MAX <= i) { |
| pr_info("%s: unknown packet vid=%x\n", __func__, vid); |
| goto refill; |
| } |
| } else |
| netdev = card->netdev[GELIC_PORT_ETHERNET_0]; |
| |
| if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) || |
| (status == GELIC_DESCR_DMA_PROTECTION_ERROR) || |
| (status == GELIC_DESCR_DMA_FORCE_END)) { |
| dev_info(ctodev(card), "dropping RX descriptor with state %x\n", |
| status); |
| netdev->stats.rx_dropped++; |
| goto refill; |
| } |
| |
| if (status == GELIC_DESCR_DMA_BUFFER_FULL) { |
| /* |
| * Buffer full would occur if and only if |
| * the frame length was longer than the size of this |
| * descriptor's buffer. If the frame length was equal |
| * to or shorter than buffer'size, FRAME_END condition |
| * would occur. |
| * Anyway this frame was longer than the MTU, |
| * just drop it. |
| */ |
| dev_info(ctodev(card), "overlength frame\n"); |
| goto refill; |
| } |
| /* |
| * descriptoers any other than FRAME_END here should |
| * be treated as error. |
| */ |
| if (status != GELIC_DESCR_DMA_FRAME_END) { |
| dev_dbg(ctodev(card), "RX descriptor with state %x\n", |
| status); |
| goto refill; |
| } |
| |
| /* ok, we've got a packet in descr */ |
| gelic_net_pass_skb_up(descr, card, netdev); |
| refill: |
| /* |
| * So that always DMAC can see the end |
| * of the descriptor chain to avoid |
| * from unwanted DMAC overrun. |
| */ |
| descr->next_descr_addr = 0; |
| |
| /* change the descriptor state: */ |
| gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE); |
| |
| /* |
| * this call can fail, but for now, just leave this |
| * decriptor without skb |
| */ |
| gelic_descr_prepare_rx(card, descr); |
| |
| chain->tail = descr; |
| chain->head = descr->next; |
| |
| /* |
| * Set this descriptor the end of the chain. |
| */ |
| descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr); |
| |
| /* |
| * If dmac chain was met, DMAC stopped. |
| * thus re-enable it |
| */ |
| if (dmac_chain_ended) { |
| card->rx_dma_restart_required = 1; |
| dev_dbg(ctodev(card), "reenable rx dma scheduled\n"); |
| } |
| |
| return 1; |
| } |
| |
| /** |
| * gelic_net_poll - NAPI poll function called by the stack to return packets |
| * @napi: napi structure |
| * @budget: number of packets we can pass to the stack at most |
| * |
| * returns the number of the processed packets |
| * |
| */ |
| static int gelic_net_poll(struct napi_struct *napi, int budget) |
| { |
| struct gelic_card *card = container_of(napi, struct gelic_card, napi); |
| int packets_done = 0; |
| |
| while (packets_done < budget) { |
| if (!gelic_card_decode_one_descr(card)) |
| break; |
| |
| packets_done++; |
| } |
| |
| if (packets_done < budget) { |
| napi_complete(napi); |
| gelic_card_rx_irq_on(card); |
| } |
| return packets_done; |
| } |
| /** |
| * gelic_net_change_mtu - changes the MTU of an interface |
| * @netdev: interface device structure |
| * @new_mtu: new MTU value |
| * |
| * returns 0 on success, <0 on failure |
| */ |
| int gelic_net_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| /* no need to re-alloc skbs or so -- the max mtu is about 2.3k |
| * and mtu is outbound only anyway */ |
| if ((new_mtu < GELIC_NET_MIN_MTU) || |
| (new_mtu > GELIC_NET_MAX_MTU)) { |
| return -EINVAL; |
| } |
| netdev->mtu = new_mtu; |
| return 0; |
| } |
| |
| /** |
| * gelic_card_interrupt - event handler for gelic_net |
| */ |
| static irqreturn_t gelic_card_interrupt(int irq, void *ptr) |
| { |
| unsigned long flags; |
| struct gelic_card *card = ptr; |
| u64 status; |
| |
| status = card->irq_status; |
| |
| if (!status) |
| return IRQ_NONE; |
| |
| status &= card->irq_mask; |
| |
| if (card->rx_dma_restart_required) { |
| card->rx_dma_restart_required = 0; |
| gelic_card_enable_rxdmac(card); |
| } |
| |
| if (status & GELIC_CARD_RXINT) { |
| gelic_card_rx_irq_off(card); |
| napi_schedule(&card->napi); |
| } |
| |
| if (status & GELIC_CARD_TXINT) { |
| spin_lock_irqsave(&card->tx_lock, flags); |
| card->tx_dma_progress = 0; |
| gelic_card_release_tx_chain(card, 0); |
| /* kick outstanding tx descriptor if any */ |
| gelic_card_kick_txdma(card, card->tx_chain.tail); |
| spin_unlock_irqrestore(&card->tx_lock, flags); |
| } |
| |
| /* ether port status changed */ |
| if (status & GELIC_CARD_PORT_STATUS_CHANGED) |
| gelic_card_get_ether_port_status(card, 1); |
| |
| #ifdef CONFIG_GELIC_WIRELESS |
| if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED | |
| GELIC_CARD_WLAN_COMMAND_COMPLETED)) |
| gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status); |
| #endif |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /** |
| * gelic_net_poll_controller - artificial interrupt for netconsole etc. |
| * @netdev: interface device structure |
| * |
| * see Documentation/networking/netconsole.txt |
| */ |
| void gelic_net_poll_controller(struct net_device *netdev) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| |
| gelic_card_set_irq_mask(card, 0); |
| gelic_card_interrupt(netdev->irq, netdev); |
| gelic_card_set_irq_mask(card, card->irq_mask); |
| } |
| #endif /* CONFIG_NET_POLL_CONTROLLER */ |
| |
| /** |
| * gelic_net_open - called upon ifonfig up |
| * @netdev: interface device structure |
| * |
| * returns 0 on success, <0 on failure |
| * |
| * gelic_net_open allocates all the descriptors and memory needed for |
| * operation, sets up multicast list and enables interrupts |
| */ |
| int gelic_net_open(struct net_device *netdev) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| |
| dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev); |
| |
| gelic_card_up(card); |
| |
| netif_start_queue(netdev); |
| gelic_card_get_ether_port_status(card, 1); |
| |
| dev_dbg(ctodev(card), " <- %s\n", __func__); |
| return 0; |
| } |
| |
| void gelic_net_get_drvinfo(struct net_device *netdev, |
| struct ethtool_drvinfo *info) |
| { |
| strncpy(info->driver, DRV_NAME, sizeof(info->driver) - 1); |
| strncpy(info->version, DRV_VERSION, sizeof(info->version) - 1); |
| } |
| |
| static int gelic_ether_get_settings(struct net_device *netdev, |
| struct ethtool_cmd *cmd) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| |
| gelic_card_get_ether_port_status(card, 0); |
| |
| if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX) |
| cmd->duplex = DUPLEX_FULL; |
| else |
| cmd->duplex = DUPLEX_HALF; |
| |
| switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) { |
| case GELIC_LV1_ETHER_SPEED_10: |
| cmd->speed = SPEED_10; |
| break; |
| case GELIC_LV1_ETHER_SPEED_100: |
| cmd->speed = SPEED_100; |
| break; |
| case GELIC_LV1_ETHER_SPEED_1000: |
| cmd->speed = SPEED_1000; |
| break; |
| default: |
| pr_info("%s: speed unknown\n", __func__); |
| cmd->speed = SPEED_10; |
| break; |
| } |
| |
| cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg | |
| SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | |
| SUPPORTED_1000baseT_Full; |
| cmd->advertising = cmd->supported; |
| if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) { |
| cmd->autoneg = AUTONEG_ENABLE; |
| } else { |
| cmd->autoneg = AUTONEG_DISABLE; |
| cmd->advertising &= ~ADVERTISED_Autoneg; |
| } |
| cmd->port = PORT_TP; |
| |
| return 0; |
| } |
| |
| static int gelic_ether_set_settings(struct net_device *netdev, |
| struct ethtool_cmd *cmd) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| u64 mode; |
| int ret; |
| |
| if (cmd->autoneg == AUTONEG_ENABLE) { |
| mode = GELIC_LV1_ETHER_AUTO_NEG; |
| } else { |
| switch (cmd->speed) { |
| case SPEED_10: |
| mode = GELIC_LV1_ETHER_SPEED_10; |
| break; |
| case SPEED_100: |
| mode = GELIC_LV1_ETHER_SPEED_100; |
| break; |
| case SPEED_1000: |
| mode = GELIC_LV1_ETHER_SPEED_1000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| if (cmd->duplex == DUPLEX_FULL) |
| mode |= GELIC_LV1_ETHER_FULL_DUPLEX; |
| else if (cmd->speed == SPEED_1000) { |
| pr_info("1000 half duplex is not supported.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| ret = gelic_card_set_link_mode(card, mode); |
| |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| u32 gelic_net_get_rx_csum(struct net_device *netdev) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| |
| return card->rx_csum; |
| } |
| |
| int gelic_net_set_rx_csum(struct net_device *netdev, u32 data) |
| { |
| struct gelic_card *card = netdev_card(netdev); |
| |
| card->rx_csum = data; |
| return 0; |
| } |
| |
| static void gelic_net_get_wol(struct net_device *netdev, |
| struct ethtool_wolinfo *wol) |
| { |
| if (0 <= ps3_compare_firmware_version(2, 2, 0)) |
| wol->supported = WAKE_MAGIC; |
| else |
| wol->supported = 0; |
| |
| wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0; |
| memset(&wol->sopass, 0, sizeof(wol->sopass)); |
| } |
| static int gelic_net_set_wol(struct net_device *netdev, |
| struct ethtool_wolinfo *wol) |
| { |
| int status; |
| struct gelic_card *card; |
| u64 v1, v2; |
| |
| if (ps3_compare_firmware_version(2, 2, 0) < 0 || |
| !capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (wol->wolopts & ~WAKE_MAGIC) |
| return -EINVAL; |
| |
| card = netdev_card(netdev); |
| if (wol->wolopts & WAKE_MAGIC) { |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_SET_WOL, |
| GELIC_LV1_WOL_MAGIC_PACKET, |
| 0, GELIC_LV1_WOL_MP_ENABLE, |
| &v1, &v2); |
| if (status) { |
| pr_info("%s: enabling WOL failed %d\n", __func__, |
| status); |
| status = -EIO; |
| goto done; |
| } |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_SET_WOL, |
| GELIC_LV1_WOL_ADD_MATCH_ADDR, |
| 0, GELIC_LV1_WOL_MATCH_ALL, |
| &v1, &v2); |
| if (!status) |
| ps3_sys_manager_set_wol(1); |
| else { |
| pr_info("%s: enabling WOL filter failed %d\n", |
| __func__, status); |
| status = -EIO; |
| } |
| } else { |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_SET_WOL, |
| GELIC_LV1_WOL_MAGIC_PACKET, |
| 0, GELIC_LV1_WOL_MP_DISABLE, |
| &v1, &v2); |
| if (status) { |
| pr_info("%s: disabling WOL failed %d\n", __func__, |
| status); |
| status = -EIO; |
| goto done; |
| } |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_SET_WOL, |
| GELIC_LV1_WOL_DELETE_MATCH_ADDR, |
| 0, GELIC_LV1_WOL_MATCH_ALL, |
| &v1, &v2); |
| if (!status) |
| ps3_sys_manager_set_wol(0); |
| else { |
| pr_info("%s: removing WOL filter failed %d\n", |
| __func__, status); |
| status = -EIO; |
| } |
| } |
| done: |
| return status; |
| } |
| |
| static const struct ethtool_ops gelic_ether_ethtool_ops = { |
| .get_drvinfo = gelic_net_get_drvinfo, |
| .get_settings = gelic_ether_get_settings, |
| .set_settings = gelic_ether_set_settings, |
| .get_link = ethtool_op_get_link, |
| .get_tx_csum = ethtool_op_get_tx_csum, |
| .set_tx_csum = ethtool_op_set_tx_csum, |
| .get_rx_csum = gelic_net_get_rx_csum, |
| .set_rx_csum = gelic_net_set_rx_csum, |
| .get_wol = gelic_net_get_wol, |
| .set_wol = gelic_net_set_wol, |
| }; |
| |
| /** |
| * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout |
| * function (to be called not under interrupt status) |
| * @work: work is context of tx timout task |
| * |
| * called as task when tx hangs, resets interface (if interface is up) |
| */ |
| static void gelic_net_tx_timeout_task(struct work_struct *work) |
| { |
| struct gelic_card *card = |
| container_of(work, struct gelic_card, tx_timeout_task); |
| struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0]; |
| |
| dev_info(ctodev(card), "%s:Timed out. Restarting... \n", __func__); |
| |
| if (!(netdev->flags & IFF_UP)) |
| goto out; |
| |
| netif_device_detach(netdev); |
| gelic_net_stop(netdev); |
| |
| gelic_net_open(netdev); |
| netif_device_attach(netdev); |
| |
| out: |
| atomic_dec(&card->tx_timeout_task_counter); |
| } |
| |
| /** |
| * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in. |
| * @netdev: interface device structure |
| * |
| * called, if tx hangs. Schedules a task that resets the interface |
| */ |
| void gelic_net_tx_timeout(struct net_device *netdev) |
| { |
| struct gelic_card *card; |
| |
| card = netdev_card(netdev); |
| atomic_inc(&card->tx_timeout_task_counter); |
| if (netdev->flags & IFF_UP) |
| schedule_work(&card->tx_timeout_task); |
| else |
| atomic_dec(&card->tx_timeout_task_counter); |
| } |
| |
| static const struct net_device_ops gelic_netdevice_ops = { |
| .ndo_open = gelic_net_open, |
| .ndo_stop = gelic_net_stop, |
| .ndo_start_xmit = gelic_net_xmit, |
| .ndo_set_multicast_list = gelic_net_set_multi, |
| .ndo_change_mtu = gelic_net_change_mtu, |
| .ndo_tx_timeout = gelic_net_tx_timeout, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = gelic_net_poll_controller, |
| #endif |
| }; |
| |
| /** |
| * gelic_ether_setup_netdev_ops - initialization of net_device operations |
| * @netdev: net_device structure |
| * |
| * fills out function pointers in the net_device structure |
| */ |
| static void __devinit gelic_ether_setup_netdev_ops(struct net_device *netdev, |
| struct napi_struct *napi) |
| { |
| netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT; |
| /* NAPI */ |
| netif_napi_add(netdev, napi, |
| gelic_net_poll, GELIC_NET_NAPI_WEIGHT); |
| netdev->ethtool_ops = &gelic_ether_ethtool_ops; |
| netdev->netdev_ops = &gelic_netdevice_ops; |
| } |
| |
| /** |
| * gelic_ether_setup_netdev - initialization of net_device |
| * @netdev: net_device structure |
| * @card: card structure |
| * |
| * Returns 0 on success or <0 on failure |
| * |
| * gelic_ether_setup_netdev initializes the net_device structure |
| * and register it. |
| **/ |
| int __devinit gelic_net_setup_netdev(struct net_device *netdev, |
| struct gelic_card *card) |
| { |
| int status; |
| u64 v1, v2; |
| |
| netdev->features = NETIF_F_IP_CSUM; |
| |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_GET_MAC_ADDRESS, |
| 0, 0, 0, &v1, &v2); |
| v1 <<= 16; |
| if (status || !is_valid_ether_addr((u8 *)&v1)) { |
| dev_info(ctodev(card), |
| "%s:lv1_net_control GET_MAC_ADDR failed %d\n", |
| __func__, status); |
| return -EINVAL; |
| } |
| memcpy(netdev->dev_addr, &v1, ETH_ALEN); |
| |
| if (card->vlan_required) { |
| netdev->hard_header_len += VLAN_HLEN; |
| /* |
| * As vlan is internally used, |
| * we can not receive vlan packets |
| */ |
| netdev->features |= NETIF_F_VLAN_CHALLENGED; |
| } |
| |
| status = register_netdev(netdev); |
| if (status) { |
| dev_err(ctodev(card), "%s:Couldn't register %s %d\n", |
| __func__, netdev->name, status); |
| return status; |
| } |
| dev_info(ctodev(card), "%s: MAC addr %pM\n", |
| netdev->name, netdev->dev_addr); |
| |
| return 0; |
| } |
| |
| /** |
| * gelic_alloc_card_net - allocates net_device and card structure |
| * |
| * returns the card structure or NULL in case of errors |
| * |
| * the card and net_device structures are linked to each other |
| */ |
| #define GELIC_ALIGN (32) |
| static struct gelic_card * __devinit gelic_alloc_card_net(struct net_device **netdev) |
| { |
| struct gelic_card *card; |
| struct gelic_port *port; |
| void *p; |
| size_t alloc_size; |
| /* |
| * gelic requires dma descriptor is 32 bytes aligned and |
| * the hypervisor requires irq_status is 8 bytes aligned. |
| */ |
| BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8); |
| BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32); |
| alloc_size = |
| sizeof(struct gelic_card) + |
| sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS + |
| sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS + |
| GELIC_ALIGN - 1; |
| |
| p = kzalloc(alloc_size, GFP_KERNEL); |
| if (!p) |
| return NULL; |
| card = PTR_ALIGN(p, GELIC_ALIGN); |
| card->unalign = p; |
| |
| /* |
| * alloc netdev |
| */ |
| *netdev = alloc_etherdev(sizeof(struct gelic_port)); |
| if (!netdev) { |
| kfree(card->unalign); |
| return NULL; |
| } |
| port = netdev_priv(*netdev); |
| |
| /* gelic_port */ |
| port->netdev = *netdev; |
| port->card = card; |
| port->type = GELIC_PORT_ETHERNET_0; |
| |
| /* gelic_card */ |
| card->netdev[GELIC_PORT_ETHERNET_0] = *netdev; |
| |
| INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task); |
| init_waitqueue_head(&card->waitq); |
| atomic_set(&card->tx_timeout_task_counter, 0); |
| mutex_init(&card->updown_lock); |
| atomic_set(&card->users, 0); |
| |
| return card; |
| } |
| |
| static void __devinit gelic_card_get_vlan_info(struct gelic_card *card) |
| { |
| u64 v1, v2; |
| int status; |
| unsigned int i; |
| struct { |
| int tx; |
| int rx; |
| } vlan_id_ix[2] = { |
| [GELIC_PORT_ETHERNET_0] = { |
| .tx = GELIC_LV1_VLAN_TX_ETHERNET_0, |
| .rx = GELIC_LV1_VLAN_RX_ETHERNET_0 |
| }, |
| [GELIC_PORT_WIRELESS] = { |
| .tx = GELIC_LV1_VLAN_TX_WIRELESS, |
| .rx = GELIC_LV1_VLAN_RX_WIRELESS |
| } |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) { |
| /* tx tag */ |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_GET_VLAN_ID, |
| vlan_id_ix[i].tx, |
| 0, 0, &v1, &v2); |
| if (status || !v1) { |
| if (status != LV1_NO_ENTRY) |
| dev_dbg(ctodev(card), |
| "get vlan id for tx(%d) failed(%d)\n", |
| vlan_id_ix[i].tx, status); |
| card->vlan[i].tx = 0; |
| card->vlan[i].rx = 0; |
| continue; |
| } |
| card->vlan[i].tx = (u16)v1; |
| |
| /* rx tag */ |
| status = lv1_net_control(bus_id(card), dev_id(card), |
| GELIC_LV1_GET_VLAN_ID, |
| vlan_id_ix[i].rx, |
| 0, 0, &v1, &v2); |
| if (status || !v1) { |
| if (status != LV1_NO_ENTRY) |
| dev_info(ctodev(card), |
| "get vlan id for rx(%d) failed(%d)\n", |
| vlan_id_ix[i].rx, status); |
| card->vlan[i].tx = 0; |
| card->vlan[i].rx = 0; |
| continue; |
| } |
| card->vlan[i].rx = (u16)v1; |
| |
| dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n", |
| i, card->vlan[i].tx, card->vlan[i].rx); |
| } |
| |
| if (card->vlan[GELIC_PORT_ETHERNET_0].tx) { |
| BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx); |
| card->vlan_required = 1; |
| } else |
| card->vlan_required = 0; |
| |
| /* check wirelss capable firmware */ |
| if (ps3_compare_firmware_version(1, 6, 0) < 0) { |
| card->vlan[GELIC_PORT_WIRELESS].tx = 0; |
| card->vlan[GELIC_PORT_WIRELESS].rx = 0; |
| } |
| |
| dev_info(ctodev(card), "internal vlan %s\n", |
| card->vlan_required? "enabled" : "disabled"); |
| } |
| /** |
| * ps3_gelic_driver_probe - add a device to the control of this driver |
| */ |
| static int __devinit ps3_gelic_driver_probe(struct ps3_system_bus_device *dev) |
| { |
| struct gelic_card *card; |
| struct net_device *netdev; |
| int result; |
| |
| pr_debug("%s: called\n", __func__); |
| result = ps3_open_hv_device(dev); |
| |
| if (result) { |
| dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n", |
| __func__); |
| goto fail_open; |
| } |
| |
| result = ps3_dma_region_create(dev->d_region); |
| |
| if (result) { |
| dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n", |
| __func__, result); |
| BUG_ON("check region type"); |
| goto fail_dma_region; |
| } |
| |
| /* alloc card/netdevice */ |
| card = gelic_alloc_card_net(&netdev); |
| if (!card) { |
| dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n", |
| __func__); |
| result = -ENOMEM; |
| goto fail_alloc_card; |
| } |
| ps3_system_bus_set_drvdata(dev, card); |
| card->dev = dev; |
| |
| /* get internal vlan info */ |
| gelic_card_get_vlan_info(card); |
| |
| card->link_mode = GELIC_LV1_ETHER_AUTO_NEG; |
| |
| /* setup interrupt */ |
| result = lv1_net_set_interrupt_status_indicator(bus_id(card), |
| dev_id(card), |
| ps3_mm_phys_to_lpar(__pa(&card->irq_status)), |
| 0); |
| |
| if (result) { |
| dev_dbg(&dev->core, |
| "%s:set_interrupt_status_indicator failed: %s\n", |
| __func__, ps3_result(result)); |
| result = -EIO; |
| goto fail_status_indicator; |
| } |
| |
| result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY, |
| &card->irq); |
| |
| if (result) { |
| dev_info(ctodev(card), |
| "%s:gelic_net_open_device failed (%d)\n", |
| __func__, result); |
| result = -EPERM; |
| goto fail_alloc_irq; |
| } |
| result = request_irq(card->irq, gelic_card_interrupt, |
| IRQF_DISABLED, netdev->name, card); |
| |
| if (result) { |
| dev_info(ctodev(card), "%s:request_irq failed (%d)\n", |
| __func__, result); |
| goto fail_request_irq; |
| } |
| |
| /* setup card structure */ |
| card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT | |
| GELIC_CARD_PORT_STATUS_CHANGED; |
| card->rx_csum = GELIC_CARD_RX_CSUM_DEFAULT; |
| |
| |
| if (gelic_card_init_chain(card, &card->tx_chain, |
| card->descr, GELIC_NET_TX_DESCRIPTORS)) |
| goto fail_alloc_tx; |
| if (gelic_card_init_chain(card, &card->rx_chain, |
| card->descr + GELIC_NET_TX_DESCRIPTORS, |
| GELIC_NET_RX_DESCRIPTORS)) |
| goto fail_alloc_rx; |
| |
| /* head of chain */ |
| card->tx_top = card->tx_chain.head; |
| card->rx_top = card->rx_chain.head; |
| dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n", |
| card->rx_top, card->tx_top, sizeof(struct gelic_descr), |
| GELIC_NET_RX_DESCRIPTORS); |
| /* allocate rx skbs */ |
| if (gelic_card_alloc_rx_skbs(card)) |
| goto fail_alloc_skbs; |
| |
| spin_lock_init(&card->tx_lock); |
| card->tx_dma_progress = 0; |
| |
| /* setup net_device structure */ |
| netdev->irq = card->irq; |
| SET_NETDEV_DEV(netdev, &card->dev->core); |
| gelic_ether_setup_netdev_ops(netdev, &card->napi); |
| result = gelic_net_setup_netdev(netdev, card); |
| if (result) { |
| dev_dbg(&dev->core, "%s: setup_netdev failed %d", |
| __func__, result); |
| goto fail_setup_netdev; |
| } |
| |
| #ifdef CONFIG_GELIC_WIRELESS |
| if (gelic_wl_driver_probe(card)) { |
| dev_dbg(&dev->core, "%s: WL init failed\n", __func__); |
| goto fail_setup_netdev; |
| } |
| #endif |
| pr_debug("%s: done\n", __func__); |
| return 0; |
| |
| fail_setup_netdev: |
| fail_alloc_skbs: |
| gelic_card_free_chain(card, card->rx_chain.head); |
| fail_alloc_rx: |
| gelic_card_free_chain(card, card->tx_chain.head); |
| fail_alloc_tx: |
| free_irq(card->irq, card); |
| netdev->irq = NO_IRQ; |
| fail_request_irq: |
| ps3_sb_event_receive_port_destroy(dev, card->irq); |
| fail_alloc_irq: |
| lv1_net_set_interrupt_status_indicator(bus_id(card), |
| bus_id(card), |
| 0, 0); |
| fail_status_indicator: |
| ps3_system_bus_set_drvdata(dev, NULL); |
| kfree(netdev_card(netdev)->unalign); |
| free_netdev(netdev); |
| fail_alloc_card: |
| ps3_dma_region_free(dev->d_region); |
| fail_dma_region: |
| ps3_close_hv_device(dev); |
| fail_open: |
| return result; |
| } |
| |
| /** |
| * ps3_gelic_driver_remove - remove a device from the control of this driver |
| */ |
| |
| static int ps3_gelic_driver_remove(struct ps3_system_bus_device *dev) |
| { |
| struct gelic_card *card = ps3_system_bus_get_drvdata(dev); |
| struct net_device *netdev0; |
| pr_debug("%s: called\n", __func__); |
| |
| /* set auto-negotiation */ |
| gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG); |
| |
| #ifdef CONFIG_GELIC_WIRELESS |
| gelic_wl_driver_remove(card); |
| #endif |
| /* stop interrupt */ |
| gelic_card_set_irq_mask(card, 0); |
| |
| /* turn off DMA, force end */ |
| gelic_card_disable_rxdmac(card); |
| gelic_card_disable_txdmac(card); |
| |
| /* release chains */ |
| gelic_card_release_tx_chain(card, 1); |
| gelic_card_release_rx_chain(card); |
| |
| gelic_card_free_chain(card, card->tx_top); |
| gelic_card_free_chain(card, card->rx_top); |
| |
| netdev0 = card->netdev[GELIC_PORT_ETHERNET_0]; |
| /* disconnect event port */ |
| free_irq(card->irq, card); |
| netdev0->irq = NO_IRQ; |
| ps3_sb_event_receive_port_destroy(card->dev, card->irq); |
| |
| wait_event(card->waitq, |
| atomic_read(&card->tx_timeout_task_counter) == 0); |
| |
| lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card), |
| 0 , 0); |
| |
| unregister_netdev(netdev0); |
| kfree(netdev_card(netdev0)->unalign); |
| free_netdev(netdev0); |
| |
| ps3_system_bus_set_drvdata(dev, NULL); |
| |
| ps3_dma_region_free(dev->d_region); |
| |
| ps3_close_hv_device(dev); |
| |
| pr_debug("%s: done\n", __func__); |
| return 0; |
| } |
| |
| static struct ps3_system_bus_driver ps3_gelic_driver = { |
| .match_id = PS3_MATCH_ID_GELIC, |
| .probe = ps3_gelic_driver_probe, |
| .remove = ps3_gelic_driver_remove, |
| .shutdown = ps3_gelic_driver_remove, |
| .core.name = "ps3_gelic_driver", |
| .core.owner = THIS_MODULE, |
| }; |
| |
| static int __init ps3_gelic_driver_init (void) |
| { |
| return firmware_has_feature(FW_FEATURE_PS3_LV1) |
| ? ps3_system_bus_driver_register(&ps3_gelic_driver) |
| : -ENODEV; |
| } |
| |
| static void __exit ps3_gelic_driver_exit (void) |
| { |
| ps3_system_bus_driver_unregister(&ps3_gelic_driver); |
| } |
| |
| module_init(ps3_gelic_driver_init); |
| module_exit(ps3_gelic_driver_exit); |
| |
| MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC); |
| |