| /* |
| * PMU driver for Wolfson Microelectronics wm831x PMICs |
| * |
| * Copyright 2009 Wolfson Microelectronics PLC. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/wm831x/core.h> |
| #include <linux/mfd/wm831x/auxadc.h> |
| #include <linux/mfd/wm831x/pmu.h> |
| #include <linux/mfd/wm831x/pdata.h> |
| |
| struct wm831x_power { |
| struct wm831x *wm831x; |
| struct power_supply wall; |
| struct power_supply usb; |
| struct power_supply battery; |
| }; |
| |
| static int wm831x_power_check_online(struct wm831x *wm831x, int supply, |
| union power_supply_propval *val) |
| { |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & supply) |
| val->intval = 1; |
| else |
| val->intval = 0; |
| |
| return 0; |
| } |
| |
| static int wm831x_power_read_voltage(struct wm831x *wm831x, |
| enum wm831x_auxadc src, |
| union power_supply_propval *val) |
| { |
| int ret; |
| |
| ret = wm831x_auxadc_read_uv(wm831x, src); |
| if (ret >= 0) |
| val->intval = ret; |
| |
| return ret; |
| } |
| |
| /********************************************************************* |
| * WALL Power |
| *********************************************************************/ |
| static int wm831x_wall_get_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); |
| struct wm831x *wm831x = wm831x_power->wm831x; |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static enum power_supply_property wm831x_wall_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| }; |
| |
| /********************************************************************* |
| * USB Power |
| *********************************************************************/ |
| static int wm831x_usb_get_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); |
| struct wm831x *wm831x = wm831x_power->wm831x; |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static enum power_supply_property wm831x_usb_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| }; |
| |
| /********************************************************************* |
| * Battery properties |
| *********************************************************************/ |
| |
| struct chg_map { |
| int val; |
| int reg_val; |
| }; |
| |
| static struct chg_map trickle_ilims[] = { |
| { 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT }, |
| { 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT }, |
| { 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT }, |
| { 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT }, |
| }; |
| |
| static struct chg_map vsels[] = { |
| { 4050, 0 << WM831X_CHG_VSEL_SHIFT }, |
| { 4100, 1 << WM831X_CHG_VSEL_SHIFT }, |
| { 4150, 2 << WM831X_CHG_VSEL_SHIFT }, |
| { 4200, 3 << WM831X_CHG_VSEL_SHIFT }, |
| }; |
| |
| static struct chg_map fast_ilims[] = { |
| { 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| { 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT }, |
| }; |
| |
| static struct chg_map eoc_iterms[] = { |
| { 20, 0 << WM831X_CHG_ITERM_SHIFT }, |
| { 30, 1 << WM831X_CHG_ITERM_SHIFT }, |
| { 40, 2 << WM831X_CHG_ITERM_SHIFT }, |
| { 50, 3 << WM831X_CHG_ITERM_SHIFT }, |
| { 60, 4 << WM831X_CHG_ITERM_SHIFT }, |
| { 70, 5 << WM831X_CHG_ITERM_SHIFT }, |
| { 80, 6 << WM831X_CHG_ITERM_SHIFT }, |
| { 90, 7 << WM831X_CHG_ITERM_SHIFT }, |
| }; |
| |
| static struct chg_map chg_times[] = { |
| { 60, 0 << WM831X_CHG_TIME_SHIFT }, |
| { 90, 1 << WM831X_CHG_TIME_SHIFT }, |
| { 120, 2 << WM831X_CHG_TIME_SHIFT }, |
| { 150, 3 << WM831X_CHG_TIME_SHIFT }, |
| { 180, 4 << WM831X_CHG_TIME_SHIFT }, |
| { 210, 5 << WM831X_CHG_TIME_SHIFT }, |
| { 240, 6 << WM831X_CHG_TIME_SHIFT }, |
| { 270, 7 << WM831X_CHG_TIME_SHIFT }, |
| { 300, 8 << WM831X_CHG_TIME_SHIFT }, |
| { 330, 9 << WM831X_CHG_TIME_SHIFT }, |
| { 360, 10 << WM831X_CHG_TIME_SHIFT }, |
| { 390, 11 << WM831X_CHG_TIME_SHIFT }, |
| { 420, 12 << WM831X_CHG_TIME_SHIFT }, |
| { 450, 13 << WM831X_CHG_TIME_SHIFT }, |
| { 480, 14 << WM831X_CHG_TIME_SHIFT }, |
| { 510, 15 << WM831X_CHG_TIME_SHIFT }, |
| }; |
| |
| static void wm831x_battey_apply_config(struct wm831x *wm831x, |
| struct chg_map *map, int count, int val, |
| int *reg, const char *name, |
| const char *units) |
| { |
| int i; |
| |
| for (i = 0; i < count; i++) |
| if (val == map[i].val) |
| break; |
| if (i == count) { |
| dev_err(wm831x->dev, "Invalid %s %d%s\n", |
| name, val, units); |
| } else { |
| *reg |= map[i].reg_val; |
| dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units); |
| } |
| } |
| |
| static void wm831x_config_battery(struct wm831x *wm831x) |
| { |
| struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data; |
| struct wm831x_battery_pdata *pdata; |
| int ret, reg1, reg2; |
| |
| if (!wm831x_pdata || !wm831x_pdata->battery) { |
| dev_warn(wm831x->dev, |
| "No battery charger configuration\n"); |
| return; |
| } |
| |
| pdata = wm831x_pdata->battery; |
| |
| reg1 = 0; |
| reg2 = 0; |
| |
| if (!pdata->enable) { |
| dev_info(wm831x->dev, "Battery charger disabled\n"); |
| return; |
| } |
| |
| reg1 |= WM831X_CHG_ENA; |
| if (pdata->off_mask) |
| reg2 |= WM831X_CHG_OFF_MSK; |
| if (pdata->fast_enable) |
| reg1 |= WM831X_CHG_FAST; |
| |
| wm831x_battey_apply_config(wm831x, trickle_ilims, |
| ARRAY_SIZE(trickle_ilims), |
| pdata->trickle_ilim, ®2, |
| "trickle charge current limit", "mA"); |
| |
| wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels), |
| pdata->vsel, ®2, |
| "target voltage", "mV"); |
| |
| wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims), |
| pdata->fast_ilim, ®2, |
| "fast charge current limit", "mA"); |
| |
| wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms), |
| pdata->eoc_iterm, ®1, |
| "end of charge current threshold", "mA"); |
| |
| wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times), |
| pdata->timeout, ®2, |
| "charger timeout", "min"); |
| |
| ret = wm831x_reg_unlock(wm831x); |
| if (ret != 0) { |
| dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret); |
| return; |
| } |
| |
| ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1, |
| WM831X_CHG_ENA_MASK | |
| WM831X_CHG_FAST_MASK | |
| WM831X_CHG_ITERM_MASK | |
| WM831X_CHG_ITERM_MASK, |
| reg1); |
| if (ret != 0) |
| dev_err(wm831x->dev, "Failed to set charger control 1: %d\n", |
| ret); |
| |
| ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2, |
| WM831X_CHG_OFF_MSK | |
| WM831X_CHG_TIME_MASK | |
| WM831X_CHG_FAST_ILIM_MASK | |
| WM831X_CHG_TRKL_ILIM_MASK | |
| WM831X_CHG_VSEL_MASK, |
| reg2); |
| if (ret != 0) |
| dev_err(wm831x->dev, "Failed to set charger control 2: %d\n", |
| ret); |
| |
| wm831x_reg_lock(wm831x); |
| } |
| |
| static int wm831x_bat_check_status(struct wm831x *wm831x, int *status) |
| { |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & WM831X_PWR_SRC_BATT) { |
| *status = POWER_SUPPLY_STATUS_DISCHARGING; |
| return 0; |
| } |
| |
| ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| switch (ret & WM831X_CHG_STATE_MASK) { |
| case WM831X_CHG_STATE_OFF: |
| *status = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| case WM831X_CHG_STATE_TRICKLE: |
| case WM831X_CHG_STATE_FAST: |
| *status = POWER_SUPPLY_STATUS_CHARGING; |
| break; |
| |
| default: |
| *status = POWER_SUPPLY_STATUS_UNKNOWN; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int wm831x_bat_check_type(struct wm831x *wm831x, int *type) |
| { |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| switch (ret & WM831X_CHG_STATE_MASK) { |
| case WM831X_CHG_STATE_TRICKLE: |
| case WM831X_CHG_STATE_TRICKLE_OT: |
| *type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; |
| break; |
| case WM831X_CHG_STATE_FAST: |
| case WM831X_CHG_STATE_FAST_OT: |
| *type = POWER_SUPPLY_CHARGE_TYPE_FAST; |
| break; |
| default: |
| *type = POWER_SUPPLY_CHARGE_TYPE_NONE; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int wm831x_bat_check_health(struct wm831x *wm831x, int *health) |
| { |
| int ret; |
| |
| ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS); |
| if (ret < 0) |
| return ret; |
| |
| if (ret & WM831X_BATT_HOT_STS) { |
| *health = POWER_SUPPLY_HEALTH_OVERHEAT; |
| return 0; |
| } |
| |
| if (ret & WM831X_BATT_COLD_STS) { |
| *health = POWER_SUPPLY_HEALTH_COLD; |
| return 0; |
| } |
| |
| if (ret & WM831X_BATT_OV_STS) { |
| *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| return 0; |
| } |
| |
| switch (ret & WM831X_CHG_STATE_MASK) { |
| case WM831X_CHG_STATE_TRICKLE_OT: |
| case WM831X_CHG_STATE_FAST_OT: |
| *health = POWER_SUPPLY_HEALTH_OVERHEAT; |
| break; |
| case WM831X_CHG_STATE_DEFECTIVE: |
| *health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| break; |
| default: |
| *health = POWER_SUPPLY_HEALTH_GOOD; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int wm831x_bat_get_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent); |
| struct wm831x *wm831x = wm831x_power->wm831x; |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| ret = wm831x_bat_check_status(wm831x, &val->intval); |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT, |
| val); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| ret = wm831x_bat_check_health(wm831x, &val->intval); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| ret = wm831x_bat_check_type(wm831x, &val->intval); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static enum power_supply_property wm831x_bat_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| }; |
| |
| static const char *wm831x_bat_irqs[] = { |
| "BATT HOT", |
| "BATT COLD", |
| "BATT FAIL", |
| "OV", |
| "END", |
| "TO", |
| "MODE", |
| "START", |
| }; |
| |
| static irqreturn_t wm831x_bat_irq(int irq, void *data) |
| { |
| struct wm831x_power *wm831x_power = data; |
| struct wm831x *wm831x = wm831x_power->wm831x; |
| |
| dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq); |
| |
| /* The battery charger is autonomous so we don't need to do |
| * anything except kick user space */ |
| power_supply_changed(&wm831x_power->battery); |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /********************************************************************* |
| * Initialisation |
| *********************************************************************/ |
| |
| static irqreturn_t wm831x_syslo_irq(int irq, void *data) |
| { |
| struct wm831x_power *wm831x_power = data; |
| struct wm831x *wm831x = wm831x_power->wm831x; |
| |
| /* Not much we can actually *do* but tell people for |
| * posterity, we're probably about to run out of power. */ |
| dev_crit(wm831x->dev, "SYSVDD under voltage\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t wm831x_pwr_src_irq(int irq, void *data) |
| { |
| struct wm831x_power *wm831x_power = data; |
| struct wm831x *wm831x = wm831x_power->wm831x; |
| |
| dev_dbg(wm831x->dev, "Power source changed\n"); |
| |
| /* Just notify for everything - little harm in overnotifying. */ |
| power_supply_changed(&wm831x_power->battery); |
| power_supply_changed(&wm831x_power->usb); |
| power_supply_changed(&wm831x_power->wall); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static __devinit int wm831x_power_probe(struct platform_device *pdev) |
| { |
| struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); |
| struct wm831x_power *power; |
| struct power_supply *usb; |
| struct power_supply *battery; |
| struct power_supply *wall; |
| int ret, irq, i; |
| |
| power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL); |
| if (power == NULL) |
| return -ENOMEM; |
| |
| power->wm831x = wm831x; |
| platform_set_drvdata(pdev, power); |
| |
| usb = &power->usb; |
| battery = &power->battery; |
| wall = &power->wall; |
| |
| /* We ignore configuration failures since we can still read back |
| * the status without enabling the charger. |
| */ |
| wm831x_config_battery(wm831x); |
| |
| wall->name = "wm831x-wall"; |
| wall->type = POWER_SUPPLY_TYPE_MAINS; |
| wall->properties = wm831x_wall_props; |
| wall->num_properties = ARRAY_SIZE(wm831x_wall_props); |
| wall->get_property = wm831x_wall_get_prop; |
| ret = power_supply_register(&pdev->dev, wall); |
| if (ret) |
| goto err_kmalloc; |
| |
| battery->name = "wm831x-battery"; |
| battery->properties = wm831x_bat_props; |
| battery->num_properties = ARRAY_SIZE(wm831x_bat_props); |
| battery->get_property = wm831x_bat_get_prop; |
| battery->use_for_apm = 1; |
| ret = power_supply_register(&pdev->dev, battery); |
| if (ret) |
| goto err_wall; |
| |
| usb->name = "wm831x-usb", |
| usb->type = POWER_SUPPLY_TYPE_USB; |
| usb->properties = wm831x_usb_props; |
| usb->num_properties = ARRAY_SIZE(wm831x_usb_props); |
| usb->get_property = wm831x_usb_get_prop; |
| ret = power_supply_register(&pdev->dev, usb); |
| if (ret) |
| goto err_battery; |
| |
| irq = platform_get_irq_byname(pdev, "SYSLO"); |
| ret = request_threaded_irq(irq, NULL, wm831x_syslo_irq, |
| IRQF_TRIGGER_RISING, "System power low", |
| power); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n", |
| irq, ret); |
| goto err_usb; |
| } |
| |
| irq = platform_get_irq_byname(pdev, "PWR SRC"); |
| ret = request_threaded_irq(irq, NULL, wm831x_pwr_src_irq, |
| IRQF_TRIGGER_RISING, "Power source", |
| power); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n", |
| irq, ret); |
| goto err_syslo; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { |
| irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); |
| ret = request_threaded_irq(irq, NULL, wm831x_bat_irq, |
| IRQF_TRIGGER_RISING, |
| wm831x_bat_irqs[i], |
| power); |
| if (ret != 0) { |
| dev_err(&pdev->dev, |
| "Failed to request %s IRQ %d: %d\n", |
| wm831x_bat_irqs[i], irq, ret); |
| goto err_bat_irq; |
| } |
| } |
| |
| return ret; |
| |
| err_bat_irq: |
| for (; i >= 0; i--) { |
| irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); |
| free_irq(irq, power); |
| } |
| irq = platform_get_irq_byname(pdev, "PWR SRC"); |
| free_irq(irq, power); |
| err_syslo: |
| irq = platform_get_irq_byname(pdev, "SYSLO"); |
| free_irq(irq, power); |
| err_usb: |
| power_supply_unregister(usb); |
| err_battery: |
| power_supply_unregister(battery); |
| err_wall: |
| power_supply_unregister(wall); |
| err_kmalloc: |
| kfree(power); |
| return ret; |
| } |
| |
| static __devexit int wm831x_power_remove(struct platform_device *pdev) |
| { |
| struct wm831x_power *wm831x_power = platform_get_drvdata(pdev); |
| int irq, i; |
| |
| for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) { |
| irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]); |
| free_irq(irq, wm831x_power); |
| } |
| |
| irq = platform_get_irq_byname(pdev, "PWR SRC"); |
| free_irq(irq, wm831x_power); |
| |
| irq = platform_get_irq_byname(pdev, "SYSLO"); |
| free_irq(irq, wm831x_power); |
| |
| power_supply_unregister(&wm831x_power->battery); |
| power_supply_unregister(&wm831x_power->wall); |
| power_supply_unregister(&wm831x_power->usb); |
| return 0; |
| } |
| |
| static struct platform_driver wm831x_power_driver = { |
| .probe = wm831x_power_probe, |
| .remove = __devexit_p(wm831x_power_remove), |
| .driver = { |
| .name = "wm831x-power", |
| }, |
| }; |
| |
| static int __init wm831x_power_init(void) |
| { |
| return platform_driver_register(&wm831x_power_driver); |
| } |
| module_init(wm831x_power_init); |
| |
| static void __exit wm831x_power_exit(void) |
| { |
| platform_driver_unregister(&wm831x_power_driver); |
| } |
| module_exit(wm831x_power_exit); |
| |
| MODULE_DESCRIPTION("Power supply driver for WM831x PMICs"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm831x-power"); |