blob: cc0c1e0bceb39a121d6e0fb310e761c5fa79e289 [file] [log] [blame]
/*
* xhci-plat.c - xHCI host controller driver platform Bus Glue.
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
* Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* A lot of code borrowed from the Linux xHCI driver.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb/otg.h>
#include <linux/usb/msm_hsusb.h>
#include "xhci.h"
#define SYNOPSIS_DWC3_VENDOR 0x5533
static struct usb_phy *phy;
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
struct xhci_plat_data *pdata = dev->platform_data;
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_BROKEN_MSI;
if (!pdata)
return;
if (pdata->vendor == SYNOPSIS_DWC3_VENDOR && pdata->revision < 0x230A)
xhci->quirks |= XHCI_PORTSC_DELAY;
if (pdata->vendor == SYNOPSIS_DWC3_VENDOR && pdata->revision == 0x250A)
xhci->quirks |= XHCI_RESET_DELAY;
}
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
return xhci_gen_setup(hcd, xhci_plat_quirks);
}
static const struct hc_driver xhci_plat_xhci_driver = {
.description = "xhci-hcd",
.product_desc = "xHCI Host Controller",
.hcd_priv_size = sizeof(struct xhci_hcd *),
/*
* generic hardware linkage
*/
.irq = xhci_irq,
.flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
/*
* basic lifecycle operations
*/
.reset = xhci_plat_setup,
.start = xhci_run,
.stop = xhci_stop,
.shutdown = xhci_shutdown,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = xhci_urb_enqueue,
.urb_dequeue = xhci_urb_dequeue,
.alloc_dev = xhci_alloc_dev,
.free_dev = xhci_free_dev,
.alloc_streams = xhci_alloc_streams,
.free_streams = xhci_free_streams,
.add_endpoint = xhci_add_endpoint,
.drop_endpoint = xhci_drop_endpoint,
.endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
.update_hub_device = xhci_update_hub_device,
.reset_device = xhci_discover_or_reset_device,
/*
* scheduling support
*/
.get_frame_number = xhci_get_frame,
/* Root hub support */
.hub_control = xhci_hub_control,
.hub_status_data = xhci_hub_status_data,
.bus_suspend = xhci_bus_suspend,
.bus_resume = xhci_bus_resume,
};
static int xhci_plat_probe(struct platform_device *pdev)
{
const struct hc_driver *driver;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
int ret;
int irq;
if (usb_disabled())
return -ENODEV;
driver = &xhci_plat_xhci_driver;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -ENODEV;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
hcd_to_bus(hcd)->skip_resume = true;
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
dev_dbg(&pdev->dev, "controller already in use\n");
ret = -EBUSY;
goto put_hcd;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_dbg(&pdev->dev, "error mapping memory\n");
ret = -EFAULT;
goto release_mem_region;
}
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto unmap_registers;
/* USB 2.0 roothub is stored in the platform_device now. */
hcd = dev_get_drvdata(&pdev->dev);
xhci = hcd_to_xhci(hcd);
xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
dev_name(&pdev->dev), hcd);
if (!xhci->shared_hcd) {
ret = -ENOMEM;
goto dealloc_usb2_hcd;
}
hcd_to_bus(xhci->shared_hcd)->skip_resume = true;
/*
* Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset)
* is called by usb_add_hcd().
*/
*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto put_usb3_hcd;
phy = usb_get_transceiver();
/* Register with OTG if present, ignore USB2 OTG using other PHY */
if (phy && phy->otg && !(phy->flags & ENABLE_SECONDARY_PHY)) {
dev_dbg(&pdev->dev, "%s otg support available\n", __func__);
ret = otg_set_host(phy->otg, &hcd->self);
if (ret) {
dev_err(&pdev->dev, "%s otg_set_host failed\n",
__func__);
usb_put_transceiver(phy);
goto put_usb3_hcd;
}
} else {
pm_runtime_no_callbacks(&pdev->dev);
}
pm_runtime_put(&pdev->dev);
return 0;
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
unmap_registers:
iounmap(hcd->regs);
release_mem_region:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int xhci_plat_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
usb_remove_hcd(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
usb_remove_hcd(hcd);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
kfree(xhci);
if (phy && phy->otg) {
otg_set_host(phy->otg, NULL);
usb_put_transceiver(phy);
}
return 0;
}
#ifdef CONFIG_PM_RUNTIME
static int xhci_msm_runtime_idle(struct device *dev)
{
dev_dbg(dev, "xhci msm runtime idle\n");
return 0;
}
static int xhci_msm_runtime_suspend(struct device *dev)
{
dev_dbg(dev, "xhci msm runtime suspend\n");
/*
* Notify OTG about suspend. It takes care of
* putting the hardware in LPM.
*/
if (phy)
return usb_phy_set_suspend(phy, 1);
return 0;
}
static int xhci_msm_runtime_resume(struct device *dev)
{
dev_dbg(dev, "xhci msm runtime resume\n");
if (phy)
return usb_phy_set_suspend(phy, 0);
return 0;
}
#endif
#ifdef CONFIG_PM_SLEEP
static int xhci_msm_pm_suspend(struct device *dev)
{
dev_dbg(dev, "xhci-msm PM suspend\n");
if (phy)
return usb_phy_set_suspend(phy, 1);
return 0;
}
static int xhci_msm_pm_resume(struct device *dev)
{
dev_dbg(dev, "xhci-msm PM resume\n");
if (pm_runtime_suspended(dev))
return 0;
if (phy)
return usb_phy_set_suspend(phy, 0);
return 0;
}
#endif
static const struct dev_pm_ops xhci_msm_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(xhci_msm_pm_suspend, xhci_msm_pm_resume)
SET_RUNTIME_PM_OPS(xhci_msm_runtime_suspend, xhci_msm_runtime_resume,
xhci_msm_runtime_idle)
};
static struct platform_driver usb_xhci_driver = {
.probe = xhci_plat_probe,
.remove = xhci_plat_remove,
.driver = {
.name = "xhci-hcd",
.pm = &xhci_msm_dev_pm_ops,
},
};
MODULE_ALIAS("platform:xhci-hcd");
int xhci_register_plat(void)
{
return platform_driver_register(&usb_xhci_driver);
}
void xhci_unregister_plat(void)
{
platform_driver_unregister(&usb_xhci_driver);
}