| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <asm/pci-direct.h> |
| #include <asm/io.h> |
| #include "pci.h" |
| |
| /* Direct PCI access. This is used for PCI accesses in early boot before |
| the PCI subsystem works. */ |
| |
| u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset) |
| { |
| u32 v; |
| outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); |
| v = inl(0xcfc); |
| if (v != 0xffffffff) |
| pr_debug("%x reading 4 from %x: %x\n", slot, offset, v); |
| return v; |
| } |
| |
| u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset) |
| { |
| u8 v; |
| outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); |
| v = inb(0xcfc + (offset&3)); |
| pr_debug("%x reading 1 from %x: %x\n", slot, offset, v); |
| return v; |
| } |
| |
| u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset) |
| { |
| u16 v; |
| outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); |
| v = inw(0xcfc + (offset&2)); |
| pr_debug("%x reading 2 from %x: %x\n", slot, offset, v); |
| return v; |
| } |
| |
| void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, |
| u32 val) |
| { |
| pr_debug("%x writing to %x: %x\n", slot, offset, val); |
| outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); |
| outl(val, 0xcfc); |
| } |
| |
| void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val) |
| { |
| pr_debug("%x writing to %x: %x\n", slot, offset, val); |
| outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); |
| outb(val, 0xcfc + (offset&3)); |
| } |
| |
| void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val) |
| { |
| pr_debug("%x writing to %x: %x\n", slot, offset, val); |
| outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); |
| outw(val, 0xcfc + (offset&2)); |
| } |
| |
| int early_pci_allowed(void) |
| { |
| return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) == |
| PCI_PROBE_CONF1; |
| } |
| |
| void early_dump_pci_device(u8 bus, u8 slot, u8 func) |
| { |
| int i; |
| int j; |
| u32 val; |
| |
| printk(KERN_INFO "PCI: %02x:%02x:%02x", bus, slot, func); |
| |
| for (i = 0; i < 256; i += 4) { |
| if (!(i & 0x0f)) |
| printk("\n%04x:",i); |
| |
| val = read_pci_config(bus, slot, func, i); |
| for (j = 0; j < 4; j++) { |
| printk(" %02x", val & 0xff); |
| val >>= 8; |
| } |
| } |
| printk("\n"); |
| } |
| |
| void early_dump_pci_devices(void) |
| { |
| unsigned bus, slot, func; |
| |
| if (!early_pci_allowed()) |
| return; |
| |
| for (bus = 0; bus < 256; bus++) { |
| for (slot = 0; slot < 32; slot++) { |
| for (func = 0; func < 8; func++) { |
| u32 class; |
| u8 type; |
| class = read_pci_config(bus, slot, func, |
| PCI_CLASS_REVISION); |
| if (class == 0xffffffff) |
| break; |
| |
| early_dump_pci_device(bus, slot, func); |
| |
| /* No multi-function device? */ |
| type = read_pci_config_byte(bus, slot, func, |
| PCI_HEADER_TYPE); |
| if (!(type & 0x80)) |
| break; |
| } |
| } |
| } |
| } |
| |