| /* drivers/tty/n_smux.c |
| * |
| * Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/tty.h> |
| #include <linux/tty_flip.h> |
| #include <linux/tty_driver.h> |
| #include <linux/smux.h> |
| #include <linux/list.h> |
| #include <linux/kfifo.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <mach/subsystem_notif.h> |
| #include <mach/subsystem_restart.h> |
| #include <mach/msm_serial_hs.h> |
| #include "smux_private.h" |
| #include "smux_loopback.h" |
| |
| #define SMUX_NOTIFY_FIFO_SIZE 128 |
| #define SMUX_TX_QUEUE_SIZE 256 |
| #define SMUX_WM_LOW 2 |
| #define SMUX_WM_HIGH 4 |
| #define SMUX_PKT_LOG_SIZE 80 |
| |
| /* Maximum size we can accept in a single RX buffer */ |
| #define TTY_RECEIVE_ROOM 65536 |
| #define TTY_BUFFER_FULL_WAIT_MS 50 |
| |
| /* maximum sleep time between wakeup attempts */ |
| #define SMUX_WAKEUP_DELAY_MAX (1 << 20) |
| |
| /* minimum delay for scheduling delayed work */ |
| #define SMUX_WAKEUP_DELAY_MIN (1 << 15) |
| |
| /* inactivity timeout for no rx/tx activity */ |
| #define SMUX_INACTIVITY_TIMEOUT_MS 1000 |
| |
| /* RX get_rx_buffer retry timeout values */ |
| #define SMUX_RX_RETRY_MIN_MS (1 << 0) /* 1 ms */ |
| #define SMUX_RX_RETRY_MAX_MS (1 << 10) /* 1024 ms */ |
| |
| enum { |
| MSM_SMUX_DEBUG = 1U << 0, |
| MSM_SMUX_INFO = 1U << 1, |
| MSM_SMUX_POWER_INFO = 1U << 2, |
| MSM_SMUX_PKT = 1U << 3, |
| }; |
| |
| static int smux_debug_mask; |
| module_param_named(debug_mask, smux_debug_mask, |
| int, S_IRUGO | S_IWUSR | S_IWGRP); |
| |
| /* Simulated wakeup used for testing */ |
| int smux_byte_loopback; |
| module_param_named(byte_loopback, smux_byte_loopback, |
| int, S_IRUGO | S_IWUSR | S_IWGRP); |
| int smux_simulate_wakeup_delay = 1; |
| module_param_named(simulate_wakeup_delay, smux_simulate_wakeup_delay, |
| int, S_IRUGO | S_IWUSR | S_IWGRP); |
| |
| #define SMUX_DBG(x...) do { \ |
| if (smux_debug_mask & MSM_SMUX_DEBUG) \ |
| pr_info(x); \ |
| } while (0) |
| |
| #define SMUX_PWR(x...) do { \ |
| if (smux_debug_mask & MSM_SMUX_POWER_INFO) \ |
| pr_info(x); \ |
| } while (0) |
| |
| #define SMUX_LOG_PKT_RX(pkt) do { \ |
| if (smux_debug_mask & MSM_SMUX_PKT) \ |
| smux_log_pkt(pkt, 1); \ |
| } while (0) |
| |
| #define SMUX_LOG_PKT_TX(pkt) do { \ |
| if (smux_debug_mask & MSM_SMUX_PKT) \ |
| smux_log_pkt(pkt, 0); \ |
| } while (0) |
| |
| /** |
| * Return true if channel is fully opened (both |
| * local and remote sides are in the OPENED state). |
| */ |
| #define IS_FULLY_OPENED(ch) \ |
| (ch && (ch)->local_state == SMUX_LCH_LOCAL_OPENED \ |
| && (ch)->remote_state == SMUX_LCH_REMOTE_OPENED) |
| |
| static struct platform_device smux_devs[] = { |
| {.name = "SMUX_CTL", .id = -1}, |
| {.name = "SMUX_RMNET", .id = -1}, |
| {.name = "SMUX_DUN_DATA_HSUART", .id = 0}, |
| {.name = "SMUX_RMNET_DATA_HSUART", .id = 1}, |
| {.name = "SMUX_RMNET_CTL_HSUART", .id = 0}, |
| {.name = "SMUX_DIAG", .id = -1}, |
| }; |
| |
| enum { |
| SMUX_CMD_STATUS_RTC = 1 << 0, |
| SMUX_CMD_STATUS_RTR = 1 << 1, |
| SMUX_CMD_STATUS_RI = 1 << 2, |
| SMUX_CMD_STATUS_DCD = 1 << 3, |
| SMUX_CMD_STATUS_FLOW_CNTL = 1 << 4, |
| }; |
| |
| /* Channel mode */ |
| enum { |
| SMUX_LCH_MODE_NORMAL, |
| SMUX_LCH_MODE_LOCAL_LOOPBACK, |
| SMUX_LCH_MODE_REMOTE_LOOPBACK, |
| }; |
| |
| enum { |
| SMUX_RX_IDLE, |
| SMUX_RX_MAGIC, |
| SMUX_RX_HDR, |
| SMUX_RX_PAYLOAD, |
| SMUX_RX_FAILURE, |
| }; |
| |
| /** |
| * Power states. |
| * |
| * The _FLUSH states are internal transitional states and are not part of the |
| * official state machine. |
| */ |
| enum { |
| SMUX_PWR_OFF, |
| SMUX_PWR_TURNING_ON, |
| SMUX_PWR_ON, |
| SMUX_PWR_TURNING_OFF_FLUSH, |
| SMUX_PWR_TURNING_OFF, |
| SMUX_PWR_OFF_FLUSH, |
| }; |
| |
| /** |
| * Logical Channel Structure. One instance per channel. |
| * |
| * Locking Hierarchy |
| * Each lock has a postfix that describes the locking level. If multiple locks |
| * are required, only increasing lock hierarchy numbers may be locked which |
| * ensures avoiding a deadlock. |
| * |
| * Locking Example |
| * If state_lock_lhb1 is currently held and the TX list needs to be |
| * manipulated, then tx_lock_lhb2 may be locked since it's locking hierarchy |
| * is greater. However, if tx_lock_lhb2 is held, then state_lock_lhb1 may |
| * not be acquired since it would result in a deadlock. |
| * |
| * Note that the Line Discipline locks (*_lha) should always be acquired |
| * before the logical channel locks. |
| */ |
| struct smux_lch_t { |
| /* channel state */ |
| spinlock_t state_lock_lhb1; |
| uint8_t lcid; |
| unsigned local_state; |
| unsigned local_mode; |
| uint8_t local_tiocm; |
| |
| unsigned remote_state; |
| unsigned remote_mode; |
| uint8_t remote_tiocm; |
| |
| int tx_flow_control; |
| |
| /* client callbacks and private data */ |
| void *priv; |
| void (*notify)(void *priv, int event_type, const void *metadata); |
| int (*get_rx_buffer)(void *priv, void **pkt_priv, void **buffer, |
| int size); |
| |
| /* RX Info */ |
| struct list_head rx_retry_queue; |
| unsigned rx_retry_queue_cnt; |
| struct delayed_work rx_retry_work; |
| |
| /* TX Info */ |
| spinlock_t tx_lock_lhb2; |
| struct list_head tx_queue; |
| struct list_head tx_ready_list; |
| unsigned tx_pending_data_cnt; |
| unsigned notify_lwm; |
| }; |
| |
| union notifier_metadata { |
| struct smux_meta_disconnected disconnected; |
| struct smux_meta_read read; |
| struct smux_meta_write write; |
| struct smux_meta_tiocm tiocm; |
| }; |
| |
| struct smux_notify_handle { |
| void (*notify)(void *priv, int event_type, const void *metadata); |
| void *priv; |
| int event_type; |
| union notifier_metadata *metadata; |
| }; |
| |
| /** |
| * Get RX Buffer Retry structure. |
| * |
| * This is used for clients that are unable to provide an RX buffer |
| * immediately. This temporary structure will be used to temporarily hold the |
| * data and perform a retry. |
| */ |
| struct smux_rx_pkt_retry { |
| struct smux_pkt_t *pkt; |
| struct list_head rx_retry_list; |
| unsigned timeout_in_ms; |
| }; |
| |
| /** |
| * Receive worker data structure. |
| * |
| * One instance is created for every call to smux_rx_state_machine. |
| */ |
| struct smux_rx_worker_data { |
| const unsigned char *data; |
| int len; |
| int flag; |
| |
| struct work_struct work; |
| struct completion work_complete; |
| }; |
| |
| /** |
| * Line discipline and module structure. |
| * |
| * Only one instance since multiple instances of line discipline are not |
| * allowed. |
| */ |
| struct smux_ldisc_t { |
| struct mutex mutex_lha0; |
| |
| int is_initialized; |
| int in_reset; |
| int ld_open_count; |
| struct tty_struct *tty; |
| |
| /* RX State Machine (singled-threaded access by smux_rx_wq) */ |
| unsigned char recv_buf[SMUX_MAX_PKT_SIZE]; |
| unsigned int recv_len; |
| unsigned int pkt_remain; |
| unsigned rx_state; |
| |
| /* RX Activity - accessed by multiple threads */ |
| spinlock_t rx_lock_lha1; |
| unsigned rx_activity_flag; |
| |
| /* TX / Power */ |
| spinlock_t tx_lock_lha2; |
| struct list_head lch_tx_ready_list; |
| unsigned power_state; |
| unsigned pwr_wakeup_delay_us; |
| unsigned tx_activity_flag; |
| unsigned powerdown_enabled; |
| struct list_head power_queue; |
| }; |
| |
| |
| /* data structures */ |
| static struct smux_lch_t smux_lch[SMUX_NUM_LOGICAL_CHANNELS]; |
| static struct smux_ldisc_t smux; |
| static const char *tty_error_type[] = { |
| [TTY_NORMAL] = "normal", |
| [TTY_OVERRUN] = "overrun", |
| [TTY_BREAK] = "break", |
| [TTY_PARITY] = "parity", |
| [TTY_FRAME] = "framing", |
| }; |
| |
| static const char *smux_cmds[] = { |
| [SMUX_CMD_DATA] = "DATA", |
| [SMUX_CMD_OPEN_LCH] = "OPEN", |
| [SMUX_CMD_CLOSE_LCH] = "CLOSE", |
| [SMUX_CMD_STATUS] = "STATUS", |
| [SMUX_CMD_PWR_CTL] = "PWR", |
| [SMUX_CMD_BYTE] = "Raw Byte", |
| }; |
| |
| static void smux_notify_local_fn(struct work_struct *work); |
| static DECLARE_WORK(smux_notify_local, smux_notify_local_fn); |
| |
| static struct workqueue_struct *smux_notify_wq; |
| static size_t handle_size; |
| static struct kfifo smux_notify_fifo; |
| static int queued_fifo_notifications; |
| static DEFINE_SPINLOCK(notify_lock_lhc1); |
| |
| static struct workqueue_struct *smux_tx_wq; |
| static struct workqueue_struct *smux_rx_wq; |
| static void smux_tx_worker(struct work_struct *work); |
| static DECLARE_WORK(smux_tx_work, smux_tx_worker); |
| |
| static void smux_wakeup_worker(struct work_struct *work); |
| static void smux_rx_retry_worker(struct work_struct *work); |
| static void smux_rx_worker(struct work_struct *work); |
| static DECLARE_WORK(smux_wakeup_work, smux_wakeup_worker); |
| static DECLARE_DELAYED_WORK(smux_wakeup_delayed_work, smux_wakeup_worker); |
| |
| static void smux_inactivity_worker(struct work_struct *work); |
| static DECLARE_WORK(smux_inactivity_work, smux_inactivity_worker); |
| static DECLARE_DELAYED_WORK(smux_delayed_inactivity_work, |
| smux_inactivity_worker); |
| |
| static long msm_smux_tiocm_get_atomic(struct smux_lch_t *ch); |
| static void list_channel(struct smux_lch_t *ch); |
| static int smux_send_status_cmd(struct smux_lch_t *ch); |
| static int smux_dispatch_rx_pkt(struct smux_pkt_t *pkt); |
| static void smux_flush_tty(void); |
| static void smux_purge_ch_tx_queue(struct smux_lch_t *ch); |
| static int schedule_notify(uint8_t lcid, int event, |
| const union notifier_metadata *metadata); |
| static int ssr_notifier_cb(struct notifier_block *this, |
| unsigned long code, |
| void *data); |
| |
| /** |
| * Convert TTY Error Flags to string for logging purposes. |
| * |
| * @flag TTY_* flag |
| * @returns String description or NULL if unknown |
| */ |
| static const char *tty_flag_to_str(unsigned flag) |
| { |
| if (flag < ARRAY_SIZE(tty_error_type)) |
| return tty_error_type[flag]; |
| return NULL; |
| } |
| |
| /** |
| * Convert SMUX Command to string for logging purposes. |
| * |
| * @cmd SMUX command |
| * @returns String description or NULL if unknown |
| */ |
| static const char *cmd_to_str(unsigned cmd) |
| { |
| if (cmd < ARRAY_SIZE(smux_cmds)) |
| return smux_cmds[cmd]; |
| return NULL; |
| } |
| |
| /** |
| * Set the reset state due to an unrecoverable failure. |
| */ |
| static void smux_enter_reset(void) |
| { |
| pr_err("%s: unrecoverable failure, waiting for ssr\n", __func__); |
| smux.in_reset = 1; |
| } |
| |
| static int lch_init(void) |
| { |
| unsigned int id; |
| struct smux_lch_t *ch; |
| int i = 0; |
| |
| handle_size = sizeof(struct smux_notify_handle *); |
| |
| smux_notify_wq = create_singlethread_workqueue("smux_notify_wq"); |
| smux_tx_wq = create_singlethread_workqueue("smux_tx_wq"); |
| smux_rx_wq = create_singlethread_workqueue("smux_rx_wq"); |
| |
| if (IS_ERR(smux_notify_wq) || IS_ERR(smux_tx_wq)) { |
| SMUX_DBG("%s: create_singlethread_workqueue ENOMEM\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| i |= kfifo_alloc(&smux_notify_fifo, |
| SMUX_NOTIFY_FIFO_SIZE * handle_size, |
| GFP_KERNEL); |
| i |= smux_loopback_init(); |
| |
| if (i) { |
| pr_err("%s: out of memory error\n", __func__); |
| return -ENOMEM; |
| } |
| |
| for (id = 0 ; id < SMUX_NUM_LOGICAL_CHANNELS; id++) { |
| ch = &smux_lch[id]; |
| |
| spin_lock_init(&ch->state_lock_lhb1); |
| ch->lcid = id; |
| ch->local_state = SMUX_LCH_LOCAL_CLOSED; |
| ch->local_mode = SMUX_LCH_MODE_NORMAL; |
| ch->local_tiocm = 0x0; |
| ch->remote_state = SMUX_LCH_REMOTE_CLOSED; |
| ch->remote_mode = SMUX_LCH_MODE_NORMAL; |
| ch->remote_tiocm = 0x0; |
| ch->tx_flow_control = 0; |
| ch->priv = 0; |
| ch->notify = 0; |
| ch->get_rx_buffer = 0; |
| |
| INIT_LIST_HEAD(&ch->rx_retry_queue); |
| ch->rx_retry_queue_cnt = 0; |
| INIT_DELAYED_WORK(&ch->rx_retry_work, smux_rx_retry_worker); |
| |
| spin_lock_init(&ch->tx_lock_lhb2); |
| INIT_LIST_HEAD(&ch->tx_queue); |
| INIT_LIST_HEAD(&ch->tx_ready_list); |
| ch->tx_pending_data_cnt = 0; |
| ch->notify_lwm = 0; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Empty and cleanup all SMUX logical channels for subsystem restart or line |
| * discipline disconnect. |
| */ |
| static void smux_lch_purge(void) |
| { |
| struct smux_lch_t *ch; |
| unsigned long flags; |
| int i; |
| |
| /* Empty TX ready list */ |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| while (!list_empty(&smux.lch_tx_ready_list)) { |
| SMUX_DBG("%s: emptying ready list %p\n", |
| __func__, smux.lch_tx_ready_list.next); |
| ch = list_first_entry(&smux.lch_tx_ready_list, |
| struct smux_lch_t, |
| tx_ready_list); |
| list_del(&ch->tx_ready_list); |
| INIT_LIST_HEAD(&ch->tx_ready_list); |
| } |
| |
| /* Purge Power Queue */ |
| while (!list_empty(&smux.power_queue)) { |
| struct smux_pkt_t *pkt; |
| |
| pkt = list_first_entry(&smux.power_queue, |
| struct smux_pkt_t, |
| list); |
| list_del(&pkt->list); |
| SMUX_DBG("%s: emptying power queue pkt=%p\n", |
| __func__, pkt); |
| smux_free_pkt(pkt); |
| } |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| /* Close all ports */ |
| for (i = 0 ; i < SMUX_NUM_LOGICAL_CHANNELS; i++) { |
| ch = &smux_lch[i]; |
| SMUX_DBG("%s: cleaning up lcid %d\n", __func__, i); |
| |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| /* Purge TX queue */ |
| spin_lock(&ch->tx_lock_lhb2); |
| smux_purge_ch_tx_queue(ch); |
| spin_unlock(&ch->tx_lock_lhb2); |
| |
| /* Notify user of disconnect and reset channel state */ |
| if (ch->local_state == SMUX_LCH_LOCAL_OPENED || |
| ch->local_state == SMUX_LCH_LOCAL_CLOSING) { |
| union notifier_metadata meta; |
| |
| meta.disconnected.is_ssr = smux.in_reset; |
| schedule_notify(ch->lcid, SMUX_DISCONNECTED, &meta); |
| } |
| |
| ch->local_state = SMUX_LCH_LOCAL_CLOSED; |
| ch->local_mode = SMUX_LCH_MODE_NORMAL; |
| ch->remote_state = SMUX_LCH_REMOTE_CLOSED; |
| ch->remote_mode = SMUX_LCH_MODE_NORMAL; |
| ch->tx_flow_control = 0; |
| |
| /* Purge RX retry queue */ |
| if (ch->rx_retry_queue_cnt) |
| queue_delayed_work(smux_rx_wq, &ch->rx_retry_work, 0); |
| |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| } |
| |
| /* Flush TX/RX workqueues */ |
| SMUX_DBG("%s: flushing tx wq\n", __func__); |
| flush_workqueue(smux_tx_wq); |
| SMUX_DBG("%s: flushing rx wq\n", __func__); |
| flush_workqueue(smux_rx_wq); |
| } |
| |
| int smux_assert_lch_id(uint32_t lcid) |
| { |
| if (lcid >= SMUX_NUM_LOGICAL_CHANNELS) |
| return -ENXIO; |
| else |
| return 0; |
| } |
| |
| /** |
| * Log packet information for debug purposes. |
| * |
| * @pkt Packet to log |
| * @is_recv 1 = RX packet; 0 = TX Packet |
| * |
| * [DIR][LCID] [LOCAL_STATE][LOCAL_MODE]:[REMOTE_STATE][REMOTE_MODE] PKT Info |
| * |
| * PKT Info: |
| * [CMD] flags [flags] len [PAYLOAD_LEN]:[PAD_LEN] [Payload hex bytes] |
| * |
| * Direction: R = Receive, S = Send |
| * Local State: C = Closed; c = closing; o = opening; O = Opened |
| * Local Mode: L = Local loopback; R = Remote loopback; N = Normal |
| * Remote State: C = Closed; O = Opened |
| * Remote Mode: R = Remote loopback; N = Normal |
| */ |
| static void smux_log_pkt(struct smux_pkt_t *pkt, int is_recv) |
| { |
| char logbuf[SMUX_PKT_LOG_SIZE]; |
| char cmd_extra[16]; |
| int i = 0; |
| int count; |
| int len; |
| char local_state; |
| char local_mode; |
| char remote_state; |
| char remote_mode; |
| struct smux_lch_t *ch; |
| unsigned char *data; |
| |
| ch = &smux_lch[pkt->hdr.lcid]; |
| |
| switch (ch->local_state) { |
| case SMUX_LCH_LOCAL_CLOSED: |
| local_state = 'C'; |
| break; |
| case SMUX_LCH_LOCAL_OPENING: |
| local_state = 'o'; |
| break; |
| case SMUX_LCH_LOCAL_OPENED: |
| local_state = 'O'; |
| break; |
| case SMUX_LCH_LOCAL_CLOSING: |
| local_state = 'c'; |
| break; |
| default: |
| local_state = 'U'; |
| break; |
| } |
| |
| switch (ch->local_mode) { |
| case SMUX_LCH_MODE_LOCAL_LOOPBACK: |
| local_mode = 'L'; |
| break; |
| case SMUX_LCH_MODE_REMOTE_LOOPBACK: |
| local_mode = 'R'; |
| break; |
| case SMUX_LCH_MODE_NORMAL: |
| local_mode = 'N'; |
| break; |
| default: |
| local_mode = 'U'; |
| break; |
| } |
| |
| switch (ch->remote_state) { |
| case SMUX_LCH_REMOTE_CLOSED: |
| remote_state = 'C'; |
| break; |
| case SMUX_LCH_REMOTE_OPENED: |
| remote_state = 'O'; |
| break; |
| |
| default: |
| remote_state = 'U'; |
| break; |
| } |
| |
| switch (ch->remote_mode) { |
| case SMUX_LCH_MODE_REMOTE_LOOPBACK: |
| remote_mode = 'R'; |
| break; |
| case SMUX_LCH_MODE_NORMAL: |
| remote_mode = 'N'; |
| break; |
| default: |
| remote_mode = 'U'; |
| break; |
| } |
| |
| /* determine command type (ACK, etc) */ |
| cmd_extra[0] = '\0'; |
| switch (pkt->hdr.cmd) { |
| case SMUX_CMD_OPEN_LCH: |
| if (pkt->hdr.flags & SMUX_CMD_OPEN_ACK) |
| snprintf(cmd_extra, sizeof(cmd_extra), " ACK"); |
| break; |
| case SMUX_CMD_CLOSE_LCH: |
| if (pkt->hdr.flags & SMUX_CMD_CLOSE_ACK) |
| snprintf(cmd_extra, sizeof(cmd_extra), " ACK"); |
| break; |
| }; |
| |
| i += snprintf(logbuf + i, SMUX_PKT_LOG_SIZE - i, |
| "smux: %c%d %c%c:%c%c %s%s flags %x len %d:%d ", |
| is_recv ? 'R' : 'S', pkt->hdr.lcid, |
| local_state, local_mode, |
| remote_state, remote_mode, |
| cmd_to_str(pkt->hdr.cmd), cmd_extra, pkt->hdr.flags, |
| pkt->hdr.payload_len, pkt->hdr.pad_len); |
| |
| len = (pkt->hdr.payload_len > 16) ? 16 : pkt->hdr.payload_len; |
| data = (unsigned char *)pkt->payload; |
| for (count = 0; count < len; count++) |
| i += snprintf(logbuf + i, SMUX_PKT_LOG_SIZE - i, |
| "%02x ", (unsigned)data[count]); |
| |
| pr_info("%s\n", logbuf); |
| } |
| |
| static void smux_notify_local_fn(struct work_struct *work) |
| { |
| struct smux_notify_handle *notify_handle = NULL; |
| union notifier_metadata *metadata = NULL; |
| unsigned long flags; |
| int i; |
| |
| for (;;) { |
| /* retrieve notification */ |
| spin_lock_irqsave(¬ify_lock_lhc1, flags); |
| if (kfifo_len(&smux_notify_fifo) >= handle_size) { |
| i = kfifo_out(&smux_notify_fifo, |
| ¬ify_handle, |
| handle_size); |
| if (i != handle_size) { |
| pr_err("%s: unable to retrieve handle %d expected %d\n", |
| __func__, i, handle_size); |
| spin_unlock_irqrestore(¬ify_lock_lhc1, flags); |
| break; |
| } |
| } else { |
| spin_unlock_irqrestore(¬ify_lock_lhc1, flags); |
| break; |
| } |
| --queued_fifo_notifications; |
| spin_unlock_irqrestore(¬ify_lock_lhc1, flags); |
| |
| /* notify client */ |
| metadata = notify_handle->metadata; |
| notify_handle->notify(notify_handle->priv, |
| notify_handle->event_type, |
| metadata); |
| |
| kfree(metadata); |
| kfree(notify_handle); |
| } |
| } |
| |
| /** |
| * Initialize existing packet. |
| */ |
| void smux_init_pkt(struct smux_pkt_t *pkt) |
| { |
| memset(pkt, 0x0, sizeof(*pkt)); |
| pkt->hdr.magic = SMUX_MAGIC; |
| INIT_LIST_HEAD(&pkt->list); |
| } |
| |
| /** |
| * Allocate and initialize packet. |
| * |
| * If a payload is needed, either set it directly and ensure that it's freed or |
| * use smd_alloc_pkt_payload() to allocate a packet and it will be freed |
| * automatically when smd_free_pkt() is called. |
| */ |
| struct smux_pkt_t *smux_alloc_pkt(void) |
| { |
| struct smux_pkt_t *pkt; |
| |
| /* Consider a free list implementation instead of kmalloc */ |
| pkt = kmalloc(sizeof(struct smux_pkt_t), GFP_ATOMIC); |
| if (!pkt) { |
| pr_err("%s: out of memory\n", __func__); |
| return NULL; |
| } |
| smux_init_pkt(pkt); |
| pkt->allocated = 1; |
| |
| return pkt; |
| } |
| |
| /** |
| * Free packet. |
| * |
| * @pkt Packet to free (may be NULL) |
| * |
| * If payload was allocated using smux_alloc_pkt_payload(), then it is freed as |
| * well. Otherwise, the caller is responsible for freeing the payload. |
| */ |
| void smux_free_pkt(struct smux_pkt_t *pkt) |
| { |
| if (pkt) { |
| if (pkt->free_payload) |
| kfree(pkt->payload); |
| if (pkt->allocated) |
| kfree(pkt); |
| } |
| } |
| |
| /** |
| * Allocate packet payload. |
| * |
| * @pkt Packet to add payload to |
| * |
| * @returns 0 on success, <0 upon error |
| * |
| * A flag is set to signal smux_free_pkt() to free the payload. |
| */ |
| int smux_alloc_pkt_payload(struct smux_pkt_t *pkt) |
| { |
| if (!pkt) |
| return -EINVAL; |
| |
| pkt->payload = kmalloc(pkt->hdr.payload_len, GFP_ATOMIC); |
| pkt->free_payload = 1; |
| if (!pkt->payload) { |
| pr_err("%s: unable to malloc %d bytes for payload\n", |
| __func__, pkt->hdr.payload_len); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int schedule_notify(uint8_t lcid, int event, |
| const union notifier_metadata *metadata) |
| { |
| struct smux_notify_handle *notify_handle = 0; |
| union notifier_metadata *meta_copy = 0; |
| struct smux_lch_t *ch; |
| int i; |
| unsigned long flags; |
| int ret = 0; |
| |
| ch = &smux_lch[lcid]; |
| notify_handle = kzalloc(sizeof(struct smux_notify_handle), |
| GFP_ATOMIC); |
| if (!notify_handle) { |
| pr_err("%s: out of memory\n", __func__); |
| ret = -ENOMEM; |
| goto free_out; |
| } |
| |
| notify_handle->notify = ch->notify; |
| notify_handle->priv = ch->priv; |
| notify_handle->event_type = event; |
| if (metadata) { |
| meta_copy = kzalloc(sizeof(union notifier_metadata), |
| GFP_ATOMIC); |
| if (!meta_copy) { |
| pr_err("%s: out of memory\n", __func__); |
| ret = -ENOMEM; |
| goto free_out; |
| } |
| *meta_copy = *metadata; |
| notify_handle->metadata = meta_copy; |
| } else { |
| notify_handle->metadata = NULL; |
| } |
| |
| spin_lock_irqsave(¬ify_lock_lhc1, flags); |
| i = kfifo_avail(&smux_notify_fifo); |
| if (i < handle_size) { |
| pr_err("%s: fifo full error %d expected %d\n", |
| __func__, i, handle_size); |
| ret = -ENOMEM; |
| goto unlock_out; |
| } |
| |
| i = kfifo_in(&smux_notify_fifo, ¬ify_handle, handle_size); |
| if (i < 0 || i != handle_size) { |
| pr_err("%s: fifo not available error %d (expected %d)\n", |
| __func__, i, handle_size); |
| ret = -ENOSPC; |
| goto unlock_out; |
| } |
| ++queued_fifo_notifications; |
| |
| unlock_out: |
| spin_unlock_irqrestore(¬ify_lock_lhc1, flags); |
| |
| free_out: |
| queue_work(smux_notify_wq, &smux_notify_local); |
| if (ret < 0 && notify_handle) { |
| kfree(notify_handle->metadata); |
| kfree(notify_handle); |
| } |
| return ret; |
| } |
| |
| /** |
| * Returns the serialized size of a packet. |
| * |
| * @pkt Packet to serialize |
| * |
| * @returns Serialized length of packet |
| */ |
| static unsigned int smux_serialize_size(struct smux_pkt_t *pkt) |
| { |
| unsigned int size; |
| |
| size = sizeof(struct smux_hdr_t); |
| size += pkt->hdr.payload_len; |
| size += pkt->hdr.pad_len; |
| |
| return size; |
| } |
| |
| /** |
| * Serialize packet @pkt into output buffer @data. |
| * |
| * @pkt Packet to serialize |
| * @out Destination buffer pointer |
| * @out_len Size of serialized packet |
| * |
| * @returns 0 for success |
| */ |
| int smux_serialize(struct smux_pkt_t *pkt, char *out, |
| unsigned int *out_len) |
| { |
| char *data_start = out; |
| |
| if (smux_serialize_size(pkt) > SMUX_MAX_PKT_SIZE) { |
| pr_err("%s: packet size %d too big\n", |
| __func__, smux_serialize_size(pkt)); |
| return -E2BIG; |
| } |
| |
| memcpy(out, &pkt->hdr, sizeof(struct smux_hdr_t)); |
| out += sizeof(struct smux_hdr_t); |
| if (pkt->payload) { |
| memcpy(out, pkt->payload, pkt->hdr.payload_len); |
| out += pkt->hdr.payload_len; |
| } |
| if (pkt->hdr.pad_len) { |
| memset(out, 0x0, pkt->hdr.pad_len); |
| out += pkt->hdr.pad_len; |
| } |
| *out_len = out - data_start; |
| return 0; |
| } |
| |
| /** |
| * Serialize header and provide pointer to the data. |
| * |
| * @pkt Packet |
| * @out[out] Pointer to the serialized header data |
| * @out_len[out] Pointer to the serialized header length |
| */ |
| static void smux_serialize_hdr(struct smux_pkt_t *pkt, char **out, |
| unsigned int *out_len) |
| { |
| *out = (char *)&pkt->hdr; |
| *out_len = sizeof(struct smux_hdr_t); |
| } |
| |
| /** |
| * Serialize payload and provide pointer to the data. |
| * |
| * @pkt Packet |
| * @out[out] Pointer to the serialized payload data |
| * @out_len[out] Pointer to the serialized payload length |
| */ |
| static void smux_serialize_payload(struct smux_pkt_t *pkt, char **out, |
| unsigned int *out_len) |
| { |
| *out = pkt->payload; |
| *out_len = pkt->hdr.payload_len; |
| } |
| |
| /** |
| * Serialize padding and provide pointer to the data. |
| * |
| * @pkt Packet |
| * @out[out] Pointer to the serialized padding (always NULL) |
| * @out_len[out] Pointer to the serialized payload length |
| * |
| * Since the padding field value is undefined, only the size of the patting |
| * (@out_len) is set and the buffer pointer (@out) will always be NULL. |
| */ |
| static void smux_serialize_padding(struct smux_pkt_t *pkt, char **out, |
| unsigned int *out_len) |
| { |
| *out = NULL; |
| *out_len = pkt->hdr.pad_len; |
| } |
| |
| /** |
| * Write data to TTY framework and handle breaking the writes up if needed. |
| * |
| * @data Data to write |
| * @len Length of data |
| * |
| * @returns 0 for success, < 0 for failure |
| */ |
| static int write_to_tty(char *data, unsigned len) |
| { |
| int data_written; |
| |
| if (!data) |
| return 0; |
| |
| while (len > 0 && !smux.in_reset) { |
| data_written = smux.tty->ops->write(smux.tty, data, len); |
| if (data_written >= 0) { |
| len -= data_written; |
| data += data_written; |
| } else { |
| pr_err("%s: TTY write returned error %d\n", |
| __func__, data_written); |
| return data_written; |
| } |
| |
| if (len) |
| tty_wait_until_sent(smux.tty, |
| msecs_to_jiffies(TTY_BUFFER_FULL_WAIT_MS)); |
| } |
| return 0; |
| } |
| |
| /** |
| * Write packet to TTY. |
| * |
| * @pkt packet to write |
| * |
| * @returns 0 on success |
| */ |
| static int smux_tx_tty(struct smux_pkt_t *pkt) |
| { |
| char *data; |
| unsigned int len; |
| int ret; |
| |
| if (!smux.tty) { |
| pr_err("%s: TTY not initialized", __func__); |
| return -ENOTTY; |
| } |
| |
| if (pkt->hdr.cmd == SMUX_CMD_BYTE) { |
| SMUX_DBG("%s: tty send single byte\n", __func__); |
| ret = write_to_tty(&pkt->hdr.flags, 1); |
| return ret; |
| } |
| |
| smux_serialize_hdr(pkt, &data, &len); |
| ret = write_to_tty(data, len); |
| if (ret) { |
| pr_err("%s: failed %d to write header %d\n", |
| __func__, ret, len); |
| return ret; |
| } |
| |
| smux_serialize_payload(pkt, &data, &len); |
| ret = write_to_tty(data, len); |
| if (ret) { |
| pr_err("%s: failed %d to write payload %d\n", |
| __func__, ret, len); |
| return ret; |
| } |
| |
| smux_serialize_padding(pkt, &data, &len); |
| while (len > 0) { |
| char zero = 0x0; |
| ret = write_to_tty(&zero, 1); |
| if (ret) { |
| pr_err("%s: failed %d to write padding %d\n", |
| __func__, ret, len); |
| return ret; |
| } |
| --len; |
| } |
| return 0; |
| } |
| |
| /** |
| * Send a single character. |
| * |
| * @ch Character to send |
| */ |
| static void smux_send_byte(char ch) |
| { |
| struct smux_pkt_t *pkt; |
| |
| pkt = smux_alloc_pkt(); |
| if (!pkt) { |
| pr_err("%s: alloc failure for byte %x\n", __func__, ch); |
| return; |
| } |
| pkt->hdr.cmd = SMUX_CMD_BYTE; |
| pkt->hdr.flags = ch; |
| pkt->hdr.lcid = SMUX_BROADCAST_LCID; |
| |
| list_add_tail(&pkt->list, &smux.power_queue); |
| queue_work(smux_tx_wq, &smux_tx_work); |
| } |
| |
| /** |
| * Receive a single-character packet (used for internal testing). |
| * |
| * @ch Character to receive |
| * @lcid Logical channel ID for packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_receive_byte(char ch, int lcid) |
| { |
| struct smux_pkt_t pkt; |
| |
| smux_init_pkt(&pkt); |
| pkt.hdr.lcid = lcid; |
| pkt.hdr.cmd = SMUX_CMD_BYTE; |
| pkt.hdr.flags = ch; |
| |
| return smux_dispatch_rx_pkt(&pkt); |
| } |
| |
| /** |
| * Queue packet for transmit. |
| * |
| * @pkt_ptr Packet to queue |
| * @ch Channel to queue packet on |
| * @queue Queue channel on ready list |
| */ |
| static void smux_tx_queue(struct smux_pkt_t *pkt_ptr, struct smux_lch_t *ch, |
| int queue) |
| { |
| unsigned long flags; |
| |
| SMUX_DBG("%s: queuing pkt %p\n", __func__, pkt_ptr); |
| |
| spin_lock_irqsave(&ch->tx_lock_lhb2, flags); |
| list_add_tail(&pkt_ptr->list, &ch->tx_queue); |
| spin_unlock_irqrestore(&ch->tx_lock_lhb2, flags); |
| |
| if (queue) |
| list_channel(ch); |
| } |
| |
| /** |
| * Handle receive OPEN ACK command. |
| * |
| * @pkt Received packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_handle_rx_open_ack(struct smux_pkt_t *pkt) |
| { |
| uint8_t lcid; |
| int ret; |
| struct smux_lch_t *ch; |
| int enable_powerdown = 0; |
| |
| lcid = pkt->hdr.lcid; |
| ch = &smux_lch[lcid]; |
| |
| spin_lock(&ch->state_lock_lhb1); |
| if (ch->local_state == SMUX_LCH_LOCAL_OPENING) { |
| SMUX_DBG("lcid %d local state 0x%x -> 0x%x\n", lcid, |
| ch->local_state, |
| SMUX_LCH_LOCAL_OPENED); |
| |
| if (pkt->hdr.flags & SMUX_CMD_OPEN_POWER_COLLAPSE) |
| enable_powerdown = 1; |
| |
| ch->local_state = SMUX_LCH_LOCAL_OPENED; |
| if (ch->remote_state == SMUX_LCH_REMOTE_OPENED) |
| schedule_notify(lcid, SMUX_CONNECTED, NULL); |
| ret = 0; |
| } else if (ch->remote_mode == SMUX_LCH_MODE_REMOTE_LOOPBACK) { |
| SMUX_DBG("Remote loopback OPEN ACK received\n"); |
| ret = 0; |
| } else { |
| pr_err("%s: lcid %d state 0x%x open ack invalid\n", |
| __func__, lcid, ch->local_state); |
| ret = -EINVAL; |
| } |
| spin_unlock(&ch->state_lock_lhb1); |
| |
| if (enable_powerdown) { |
| spin_lock(&smux.tx_lock_lha2); |
| if (!smux.powerdown_enabled) { |
| smux.powerdown_enabled = 1; |
| SMUX_DBG("%s: enabling power-collapse support\n", |
| __func__); |
| } |
| spin_unlock(&smux.tx_lock_lha2); |
| } |
| |
| return ret; |
| } |
| |
| static int smux_handle_close_ack(struct smux_pkt_t *pkt) |
| { |
| uint8_t lcid; |
| int ret; |
| struct smux_lch_t *ch; |
| union notifier_metadata meta_disconnected; |
| unsigned long flags; |
| |
| lcid = pkt->hdr.lcid; |
| ch = &smux_lch[lcid]; |
| meta_disconnected.disconnected.is_ssr = 0; |
| |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| if (ch->local_state == SMUX_LCH_LOCAL_CLOSING) { |
| SMUX_DBG("lcid %d local state 0x%x -> 0x%x\n", lcid, |
| SMUX_LCH_LOCAL_CLOSING, |
| SMUX_LCH_LOCAL_CLOSED); |
| ch->local_state = SMUX_LCH_LOCAL_CLOSED; |
| if (ch->remote_state == SMUX_LCH_REMOTE_CLOSED) |
| schedule_notify(lcid, SMUX_DISCONNECTED, |
| &meta_disconnected); |
| ret = 0; |
| } else if (ch->remote_mode == SMUX_LCH_MODE_REMOTE_LOOPBACK) { |
| SMUX_DBG("Remote loopback CLOSE ACK received\n"); |
| ret = 0; |
| } else { |
| pr_err("%s: lcid %d state 0x%x close ack invalid\n", |
| __func__, lcid, ch->local_state); |
| ret = -EINVAL; |
| } |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| return ret; |
| } |
| |
| /** |
| * Handle receive OPEN command. |
| * |
| * @pkt Received packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_handle_rx_open_cmd(struct smux_pkt_t *pkt) |
| { |
| uint8_t lcid; |
| int ret; |
| struct smux_lch_t *ch; |
| struct smux_pkt_t *ack_pkt; |
| unsigned long flags; |
| int tx_ready = 0; |
| int enable_powerdown = 0; |
| |
| if (pkt->hdr.flags & SMUX_CMD_OPEN_ACK) |
| return smux_handle_rx_open_ack(pkt); |
| |
| lcid = pkt->hdr.lcid; |
| ch = &smux_lch[lcid]; |
| |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| if (ch->remote_state == SMUX_LCH_REMOTE_CLOSED) { |
| SMUX_DBG("lcid %d remote state 0x%x -> 0x%x\n", lcid, |
| SMUX_LCH_REMOTE_CLOSED, |
| SMUX_LCH_REMOTE_OPENED); |
| |
| ch->remote_state = SMUX_LCH_REMOTE_OPENED; |
| if (pkt->hdr.flags & SMUX_CMD_OPEN_POWER_COLLAPSE) |
| enable_powerdown = 1; |
| |
| /* Send Open ACK */ |
| ack_pkt = smux_alloc_pkt(); |
| if (!ack_pkt) { |
| /* exit out to allow retrying this later */ |
| ret = -ENOMEM; |
| goto out; |
| } |
| ack_pkt->hdr.cmd = SMUX_CMD_OPEN_LCH; |
| ack_pkt->hdr.flags = SMUX_CMD_OPEN_ACK |
| | SMUX_CMD_OPEN_POWER_COLLAPSE; |
| ack_pkt->hdr.lcid = lcid; |
| ack_pkt->hdr.payload_len = 0; |
| ack_pkt->hdr.pad_len = 0; |
| if (pkt->hdr.flags & SMUX_CMD_OPEN_REMOTE_LOOPBACK) { |
| ch->remote_mode = SMUX_LCH_MODE_REMOTE_LOOPBACK; |
| ack_pkt->hdr.flags |= SMUX_CMD_OPEN_REMOTE_LOOPBACK; |
| } |
| smux_tx_queue(ack_pkt, ch, 0); |
| tx_ready = 1; |
| |
| if (ch->remote_mode == SMUX_LCH_MODE_REMOTE_LOOPBACK) { |
| /* |
| * Send an Open command to the remote side to |
| * simulate our local client doing it. |
| */ |
| ack_pkt = smux_alloc_pkt(); |
| if (ack_pkt) { |
| ack_pkt->hdr.lcid = lcid; |
| ack_pkt->hdr.cmd = SMUX_CMD_OPEN_LCH; |
| ack_pkt->hdr.flags = |
| SMUX_CMD_OPEN_POWER_COLLAPSE; |
| ack_pkt->hdr.payload_len = 0; |
| ack_pkt->hdr.pad_len = 0; |
| smux_tx_queue(ack_pkt, ch, 0); |
| tx_ready = 1; |
| } else { |
| pr_err("%s: Remote loopack allocation failure\n", |
| __func__); |
| } |
| } else if (ch->local_state == SMUX_LCH_LOCAL_OPENED) { |
| schedule_notify(lcid, SMUX_CONNECTED, NULL); |
| } |
| ret = 0; |
| } else { |
| pr_err("%s: lcid %d remote state 0x%x open invalid\n", |
| __func__, lcid, ch->remote_state); |
| ret = -EINVAL; |
| } |
| |
| out: |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| if (enable_powerdown) { |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (!smux.powerdown_enabled) { |
| smux.powerdown_enabled = 1; |
| SMUX_DBG("%s: enabling power-collapse support\n", |
| __func__); |
| } |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| } |
| |
| if (tx_ready) |
| list_channel(ch); |
| |
| return ret; |
| } |
| |
| /** |
| * Handle receive CLOSE command. |
| * |
| * @pkt Received packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_handle_rx_close_cmd(struct smux_pkt_t *pkt) |
| { |
| uint8_t lcid; |
| int ret; |
| struct smux_lch_t *ch; |
| struct smux_pkt_t *ack_pkt; |
| union notifier_metadata meta_disconnected; |
| unsigned long flags; |
| int tx_ready = 0; |
| |
| if (pkt->hdr.flags & SMUX_CMD_CLOSE_ACK) |
| return smux_handle_close_ack(pkt); |
| |
| lcid = pkt->hdr.lcid; |
| ch = &smux_lch[lcid]; |
| meta_disconnected.disconnected.is_ssr = 0; |
| |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| if (ch->remote_state == SMUX_LCH_REMOTE_OPENED) { |
| SMUX_DBG("lcid %d remote state 0x%x -> 0x%x\n", lcid, |
| SMUX_LCH_REMOTE_OPENED, |
| SMUX_LCH_REMOTE_CLOSED); |
| |
| ack_pkt = smux_alloc_pkt(); |
| if (!ack_pkt) { |
| /* exit out to allow retrying this later */ |
| ret = -ENOMEM; |
| goto out; |
| } |
| ch->remote_state = SMUX_LCH_REMOTE_CLOSED; |
| ack_pkt->hdr.cmd = SMUX_CMD_CLOSE_LCH; |
| ack_pkt->hdr.flags = SMUX_CMD_CLOSE_ACK; |
| ack_pkt->hdr.lcid = lcid; |
| ack_pkt->hdr.payload_len = 0; |
| ack_pkt->hdr.pad_len = 0; |
| smux_tx_queue(ack_pkt, ch, 0); |
| tx_ready = 1; |
| |
| if (ch->remote_mode == SMUX_LCH_MODE_REMOTE_LOOPBACK) { |
| /* |
| * Send a Close command to the remote side to simulate |
| * our local client doing it. |
| */ |
| ack_pkt = smux_alloc_pkt(); |
| if (ack_pkt) { |
| ack_pkt->hdr.lcid = lcid; |
| ack_pkt->hdr.cmd = SMUX_CMD_CLOSE_LCH; |
| ack_pkt->hdr.flags = 0; |
| ack_pkt->hdr.payload_len = 0; |
| ack_pkt->hdr.pad_len = 0; |
| smux_tx_queue(ack_pkt, ch, 0); |
| tx_ready = 1; |
| } else { |
| pr_err("%s: Remote loopack allocation failure\n", |
| __func__); |
| } |
| } |
| |
| if (ch->local_state == SMUX_LCH_LOCAL_CLOSED) |
| schedule_notify(lcid, SMUX_DISCONNECTED, |
| &meta_disconnected); |
| ret = 0; |
| } else { |
| pr_err("%s: lcid %d remote state 0x%x close invalid\n", |
| __func__, lcid, ch->remote_state); |
| ret = -EINVAL; |
| } |
| out: |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| if (tx_ready) |
| list_channel(ch); |
| |
| return ret; |
| } |
| |
| /* |
| * Handle receive DATA command. |
| * |
| * @pkt Received packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_handle_rx_data_cmd(struct smux_pkt_t *pkt) |
| { |
| uint8_t lcid; |
| int ret = 0; |
| int do_retry = 0; |
| int tmp; |
| int rx_len; |
| struct smux_lch_t *ch; |
| union notifier_metadata metadata; |
| int remote_loopback; |
| struct smux_pkt_t *ack_pkt; |
| unsigned long flags; |
| |
| if (!pkt || smux_assert_lch_id(pkt->hdr.lcid)) { |
| ret = -ENXIO; |
| goto out; |
| } |
| |
| rx_len = pkt->hdr.payload_len; |
| if (rx_len == 0) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| lcid = pkt->hdr.lcid; |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| remote_loopback = ch->remote_mode == SMUX_LCH_MODE_REMOTE_LOOPBACK; |
| |
| if (ch->local_state != SMUX_LCH_LOCAL_OPENED |
| && !remote_loopback) { |
| pr_err("smux: ch %d error data on local state 0x%x", |
| lcid, ch->local_state); |
| ret = -EIO; |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| goto out; |
| } |
| |
| if (ch->remote_state != SMUX_LCH_REMOTE_OPENED) { |
| pr_err("smux: ch %d error data on remote state 0x%x", |
| lcid, ch->remote_state); |
| ret = -EIO; |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| goto out; |
| } |
| |
| if (!list_empty(&ch->rx_retry_queue)) { |
| do_retry = 1; |
| if ((ch->rx_retry_queue_cnt + 1) > SMUX_RX_RETRY_MAX_PKTS) { |
| /* retry queue full */ |
| schedule_notify(lcid, SMUX_READ_FAIL, NULL); |
| ret = -ENOMEM; |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| goto out; |
| } |
| } |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| if (remote_loopback) { |
| /* Echo the data back to the remote client. */ |
| ack_pkt = smux_alloc_pkt(); |
| if (ack_pkt) { |
| ack_pkt->hdr.lcid = lcid; |
| ack_pkt->hdr.cmd = SMUX_CMD_DATA; |
| ack_pkt->hdr.flags = 0; |
| ack_pkt->hdr.payload_len = pkt->hdr.payload_len; |
| if (ack_pkt->hdr.payload_len) { |
| smux_alloc_pkt_payload(ack_pkt); |
| memcpy(ack_pkt->payload, pkt->payload, |
| ack_pkt->hdr.payload_len); |
| } |
| ack_pkt->hdr.pad_len = pkt->hdr.pad_len; |
| smux_tx_queue(ack_pkt, ch, 0); |
| list_channel(ch); |
| } else { |
| pr_err("%s: Remote loopack allocation failure\n", |
| __func__); |
| } |
| } else if (!do_retry) { |
| /* request buffer from client */ |
| metadata.read.pkt_priv = 0; |
| metadata.read.buffer = 0; |
| tmp = ch->get_rx_buffer(ch->priv, |
| (void **)&metadata.read.pkt_priv, |
| (void **)&metadata.read.buffer, |
| rx_len); |
| |
| if (tmp == 0 && metadata.read.buffer) { |
| /* place data into RX buffer */ |
| memcpy(metadata.read.buffer, pkt->payload, |
| rx_len); |
| metadata.read.len = rx_len; |
| schedule_notify(lcid, SMUX_READ_DONE, |
| &metadata); |
| } else if (tmp == -EAGAIN || |
| (tmp == 0 && !metadata.read.buffer)) { |
| /* buffer allocation failed - add to retry queue */ |
| do_retry = 1; |
| } else if (tmp < 0) { |
| schedule_notify(lcid, SMUX_READ_FAIL, NULL); |
| ret = -ENOMEM; |
| } |
| } |
| |
| if (do_retry) { |
| struct smux_rx_pkt_retry *retry; |
| |
| retry = kmalloc(sizeof(struct smux_rx_pkt_retry), GFP_KERNEL); |
| if (!retry) { |
| pr_err("%s: retry alloc failure\n", __func__); |
| ret = -ENOMEM; |
| schedule_notify(lcid, SMUX_READ_FAIL, NULL); |
| goto out; |
| } |
| INIT_LIST_HEAD(&retry->rx_retry_list); |
| retry->timeout_in_ms = SMUX_RX_RETRY_MIN_MS; |
| |
| /* copy packet */ |
| retry->pkt = smux_alloc_pkt(); |
| if (!retry->pkt) { |
| kfree(retry); |
| pr_err("%s: pkt alloc failure\n", __func__); |
| ret = -ENOMEM; |
| schedule_notify(lcid, SMUX_READ_FAIL, NULL); |
| goto out; |
| } |
| retry->pkt->hdr.lcid = lcid; |
| retry->pkt->hdr.payload_len = pkt->hdr.payload_len; |
| retry->pkt->hdr.pad_len = pkt->hdr.pad_len; |
| if (retry->pkt->hdr.payload_len) { |
| smux_alloc_pkt_payload(retry->pkt); |
| memcpy(retry->pkt->payload, pkt->payload, |
| retry->pkt->hdr.payload_len); |
| } |
| |
| /* add to retry queue */ |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| list_add_tail(&retry->rx_retry_list, &ch->rx_retry_queue); |
| ++ch->rx_retry_queue_cnt; |
| if (ch->rx_retry_queue_cnt == 1) |
| queue_delayed_work(smux_rx_wq, &ch->rx_retry_work, |
| msecs_to_jiffies(retry->timeout_in_ms)); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| } |
| |
| out: |
| return ret; |
| } |
| |
| /** |
| * Handle receive byte command for testing purposes. |
| * |
| * @pkt Received packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_handle_rx_byte_cmd(struct smux_pkt_t *pkt) |
| { |
| uint8_t lcid; |
| int ret; |
| struct smux_lch_t *ch; |
| union notifier_metadata metadata; |
| unsigned long flags; |
| |
| if (!pkt || smux_assert_lch_id(pkt->hdr.lcid)) { |
| pr_err("%s: invalid packet or channel id\n", __func__); |
| return -ENXIO; |
| } |
| |
| lcid = pkt->hdr.lcid; |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| if (ch->local_state != SMUX_LCH_LOCAL_OPENED) { |
| pr_err("smux: ch %d error data on local state 0x%x", |
| lcid, ch->local_state); |
| ret = -EIO; |
| goto out; |
| } |
| |
| if (ch->remote_state != SMUX_LCH_REMOTE_OPENED) { |
| pr_err("smux: ch %d error data on remote state 0x%x", |
| lcid, ch->remote_state); |
| ret = -EIO; |
| goto out; |
| } |
| |
| metadata.read.pkt_priv = (void *)(int)pkt->hdr.flags; |
| metadata.read.buffer = 0; |
| schedule_notify(lcid, SMUX_READ_DONE, &metadata); |
| ret = 0; |
| |
| out: |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| return ret; |
| } |
| |
| /** |
| * Handle receive status command. |
| * |
| * @pkt Received packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_handle_rx_status_cmd(struct smux_pkt_t *pkt) |
| { |
| uint8_t lcid; |
| int ret; |
| struct smux_lch_t *ch; |
| union notifier_metadata meta; |
| unsigned long flags; |
| int tx_ready = 0; |
| |
| lcid = pkt->hdr.lcid; |
| ch = &smux_lch[lcid]; |
| |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| meta.tiocm.tiocm_old = ch->remote_tiocm; |
| meta.tiocm.tiocm_new = pkt->hdr.flags; |
| |
| /* update logical channel flow control */ |
| if ((meta.tiocm.tiocm_old & SMUX_CMD_STATUS_FLOW_CNTL) ^ |
| (meta.tiocm.tiocm_new & SMUX_CMD_STATUS_FLOW_CNTL)) { |
| /* logical channel flow control changed */ |
| if (pkt->hdr.flags & SMUX_CMD_STATUS_FLOW_CNTL) { |
| /* disabled TX */ |
| SMUX_DBG("TX Flow control enabled\n"); |
| ch->tx_flow_control = 1; |
| } else { |
| /* re-enable channel */ |
| SMUX_DBG("TX Flow control disabled\n"); |
| ch->tx_flow_control = 0; |
| tx_ready = 1; |
| } |
| } |
| meta.tiocm.tiocm_old = msm_smux_tiocm_get_atomic(ch); |
| ch->remote_tiocm = pkt->hdr.flags; |
| meta.tiocm.tiocm_new = msm_smux_tiocm_get_atomic(ch); |
| |
| /* client notification for status change */ |
| if (IS_FULLY_OPENED(ch)) { |
| if (meta.tiocm.tiocm_old != meta.tiocm.tiocm_new) |
| schedule_notify(lcid, SMUX_TIOCM_UPDATE, &meta); |
| ret = 0; |
| } |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| if (tx_ready) |
| list_channel(ch); |
| |
| return ret; |
| } |
| |
| /** |
| * Handle receive power command. |
| * |
| * @pkt Received packet |
| * |
| * @returns 0 for success |
| */ |
| static int smux_handle_rx_power_cmd(struct smux_pkt_t *pkt) |
| { |
| struct smux_pkt_t *ack_pkt = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (pkt->hdr.flags & SMUX_CMD_PWR_CTL_ACK) { |
| /* local sleep request ack */ |
| if (smux.power_state == SMUX_PWR_TURNING_OFF) { |
| /* Power-down complete, turn off UART */ |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, SMUX_PWR_OFF_FLUSH); |
| smux.power_state = SMUX_PWR_OFF_FLUSH; |
| queue_work(smux_tx_wq, &smux_inactivity_work); |
| } else { |
| pr_err("%s: sleep request ack invalid in state %d\n", |
| __func__, smux.power_state); |
| } |
| } else { |
| /* |
| * Remote sleep request |
| * |
| * Even if we have data pending, we need to transition to the |
| * POWER_OFF state and then perform a wakeup since the remote |
| * side has requested a power-down. |
| * |
| * The state here is set to SMUX_PWR_TURNING_OFF_FLUSH and |
| * the TX thread will set the state to SMUX_PWR_TURNING_OFF |
| * when it sends the packet. |
| */ |
| if (smux.power_state == SMUX_PWR_ON |
| || smux.power_state == SMUX_PWR_TURNING_OFF) { |
| ack_pkt = smux_alloc_pkt(); |
| if (ack_pkt) { |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, |
| SMUX_PWR_TURNING_OFF_FLUSH); |
| |
| smux.power_state = SMUX_PWR_TURNING_OFF_FLUSH; |
| |
| /* send power-down ack */ |
| ack_pkt->hdr.cmd = SMUX_CMD_PWR_CTL; |
| ack_pkt->hdr.flags = SMUX_CMD_PWR_CTL_ACK; |
| ack_pkt->hdr.lcid = SMUX_BROADCAST_LCID; |
| list_add_tail(&ack_pkt->list, |
| &smux.power_queue); |
| queue_work(smux_tx_wq, &smux_tx_work); |
| } |
| } else { |
| pr_err("%s: sleep request invalid in state %d\n", |
| __func__, smux.power_state); |
| } |
| } |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * Handle dispatching a completed packet for receive processing. |
| * |
| * @pkt Packet to process |
| * |
| * @returns 0 for success |
| */ |
| static int smux_dispatch_rx_pkt(struct smux_pkt_t *pkt) |
| { |
| int ret = -ENXIO; |
| |
| SMUX_LOG_PKT_RX(pkt); |
| |
| switch (pkt->hdr.cmd) { |
| case SMUX_CMD_OPEN_LCH: |
| if (smux_assert_lch_id(pkt->hdr.lcid)) { |
| pr_err("%s: invalid channel id %d\n", |
| __func__, pkt->hdr.lcid); |
| break; |
| } |
| ret = smux_handle_rx_open_cmd(pkt); |
| break; |
| |
| case SMUX_CMD_DATA: |
| if (smux_assert_lch_id(pkt->hdr.lcid)) { |
| pr_err("%s: invalid channel id %d\n", |
| __func__, pkt->hdr.lcid); |
| break; |
| } |
| ret = smux_handle_rx_data_cmd(pkt); |
| break; |
| |
| case SMUX_CMD_CLOSE_LCH: |
| if (smux_assert_lch_id(pkt->hdr.lcid)) { |
| pr_err("%s: invalid channel id %d\n", |
| __func__, pkt->hdr.lcid); |
| break; |
| } |
| ret = smux_handle_rx_close_cmd(pkt); |
| break; |
| |
| case SMUX_CMD_STATUS: |
| if (smux_assert_lch_id(pkt->hdr.lcid)) { |
| pr_err("%s: invalid channel id %d\n", |
| __func__, pkt->hdr.lcid); |
| break; |
| } |
| ret = smux_handle_rx_status_cmd(pkt); |
| break; |
| |
| case SMUX_CMD_PWR_CTL: |
| ret = smux_handle_rx_power_cmd(pkt); |
| break; |
| |
| case SMUX_CMD_BYTE: |
| ret = smux_handle_rx_byte_cmd(pkt); |
| break; |
| |
| default: |
| pr_err("%s: command %d unknown\n", __func__, pkt->hdr.cmd); |
| ret = -EINVAL; |
| } |
| return ret; |
| } |
| |
| /** |
| * Deserializes a packet and dispatches it to the packet receive logic. |
| * |
| * @data Raw data for one packet |
| * @len Length of the data |
| * |
| * @returns 0 for success |
| */ |
| static int smux_deserialize(unsigned char *data, int len) |
| { |
| struct smux_pkt_t recv; |
| |
| smux_init_pkt(&recv); |
| |
| /* |
| * It may be possible to optimize this to not use the |
| * temporary buffer. |
| */ |
| memcpy(&recv.hdr, data, sizeof(struct smux_hdr_t)); |
| |
| if (recv.hdr.magic != SMUX_MAGIC) { |
| pr_err("%s: invalid header magic\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (recv.hdr.payload_len) |
| recv.payload = data + sizeof(struct smux_hdr_t); |
| |
| return smux_dispatch_rx_pkt(&recv); |
| } |
| |
| /** |
| * Handle wakeup request byte. |
| */ |
| static void smux_handle_wakeup_req(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (smux.power_state == SMUX_PWR_OFF |
| || smux.power_state == SMUX_PWR_TURNING_ON) { |
| /* wakeup system */ |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, SMUX_PWR_ON); |
| smux.power_state = SMUX_PWR_ON; |
| queue_work(smux_tx_wq, &smux_wakeup_work); |
| queue_work(smux_tx_wq, &smux_tx_work); |
| queue_delayed_work(smux_tx_wq, &smux_delayed_inactivity_work, |
| msecs_to_jiffies(SMUX_INACTIVITY_TIMEOUT_MS)); |
| smux_send_byte(SMUX_WAKEUP_ACK); |
| } else { |
| smux_send_byte(SMUX_WAKEUP_ACK); |
| } |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| } |
| |
| /** |
| * Handle wakeup request ack. |
| */ |
| static void smux_handle_wakeup_ack(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (smux.power_state == SMUX_PWR_TURNING_ON) { |
| /* received response to wakeup request */ |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, SMUX_PWR_ON); |
| smux.power_state = SMUX_PWR_ON; |
| queue_work(smux_tx_wq, &smux_tx_work); |
| queue_delayed_work(smux_tx_wq, &smux_delayed_inactivity_work, |
| msecs_to_jiffies(SMUX_INACTIVITY_TIMEOUT_MS)); |
| |
| } else if (smux.power_state != SMUX_PWR_ON) { |
| /* invalid message */ |
| pr_err("%s: wakeup request ack invalid in state %d\n", |
| __func__, smux.power_state); |
| } |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| } |
| |
| /** |
| * RX State machine - IDLE state processing. |
| * |
| * @data New RX data to process |
| * @len Length of the data |
| * @used Return value of length processed |
| * @flag Error flag - TTY_NORMAL 0 for no failure |
| */ |
| static void smux_rx_handle_idle(const unsigned char *data, |
| int len, int *used, int flag) |
| { |
| int i; |
| |
| if (flag) { |
| if (smux_byte_loopback) |
| smux_receive_byte(SMUX_UT_ECHO_ACK_FAIL, |
| smux_byte_loopback); |
| pr_err("%s: TTY error 0x%x - ignoring\n", __func__, flag); |
| ++*used; |
| return; |
| } |
| |
| for (i = *used; i < len && smux.rx_state == SMUX_RX_IDLE; i++) { |
| switch (data[i]) { |
| case SMUX_MAGIC_WORD1: |
| smux.rx_state = SMUX_RX_MAGIC; |
| break; |
| case SMUX_WAKEUP_REQ: |
| smux_handle_wakeup_req(); |
| break; |
| case SMUX_WAKEUP_ACK: |
| smux_handle_wakeup_ack(); |
| break; |
| default: |
| /* unexpected character */ |
| if (smux_byte_loopback && data[i] == SMUX_UT_ECHO_REQ) |
| smux_receive_byte(SMUX_UT_ECHO_ACK_OK, |
| smux_byte_loopback); |
| pr_err("%s: parse error 0x%02x - ignoring\n", __func__, |
| (unsigned)data[i]); |
| break; |
| } |
| } |
| |
| *used = i; |
| } |
| |
| /** |
| * RX State machine - Header Magic state processing. |
| * |
| * @data New RX data to process |
| * @len Length of the data |
| * @used Return value of length processed |
| * @flag Error flag - TTY_NORMAL 0 for no failure |
| */ |
| static void smux_rx_handle_magic(const unsigned char *data, |
| int len, int *used, int flag) |
| { |
| int i; |
| |
| if (flag) { |
| pr_err("%s: TTY RX error %d\n", __func__, flag); |
| smux_enter_reset(); |
| smux.rx_state = SMUX_RX_FAILURE; |
| ++*used; |
| return; |
| } |
| |
| for (i = *used; i < len && smux.rx_state == SMUX_RX_MAGIC; i++) { |
| /* wait for completion of the magic */ |
| if (data[i] == SMUX_MAGIC_WORD2) { |
| smux.recv_len = 0; |
| smux.recv_buf[smux.recv_len++] = SMUX_MAGIC_WORD1; |
| smux.recv_buf[smux.recv_len++] = SMUX_MAGIC_WORD2; |
| smux.rx_state = SMUX_RX_HDR; |
| } else { |
| /* unexpected / trash character */ |
| pr_err("%s: rx parse error for char %c; *used=%d, len=%d\n", |
| __func__, data[i], *used, len); |
| smux.rx_state = SMUX_RX_IDLE; |
| } |
| } |
| |
| *used = i; |
| } |
| |
| /** |
| * RX State machine - Packet Header state processing. |
| * |
| * @data New RX data to process |
| * @len Length of the data |
| * @used Return value of length processed |
| * @flag Error flag - TTY_NORMAL 0 for no failure |
| */ |
| static void smux_rx_handle_hdr(const unsigned char *data, |
| int len, int *used, int flag) |
| { |
| int i; |
| struct smux_hdr_t *hdr; |
| |
| if (flag) { |
| pr_err("%s: TTY RX error %d\n", __func__, flag); |
| smux_enter_reset(); |
| smux.rx_state = SMUX_RX_FAILURE; |
| ++*used; |
| return; |
| } |
| |
| for (i = *used; i < len && smux.rx_state == SMUX_RX_HDR; i++) { |
| smux.recv_buf[smux.recv_len++] = data[i]; |
| |
| if (smux.recv_len == sizeof(struct smux_hdr_t)) { |
| /* complete header received */ |
| hdr = (struct smux_hdr_t *)smux.recv_buf; |
| smux.pkt_remain = hdr->payload_len + hdr->pad_len; |
| smux.rx_state = SMUX_RX_PAYLOAD; |
| } |
| } |
| *used = i; |
| } |
| |
| /** |
| * RX State machine - Packet Payload state processing. |
| * |
| * @data New RX data to process |
| * @len Length of the data |
| * @used Return value of length processed |
| * @flag Error flag - TTY_NORMAL 0 for no failure |
| */ |
| static void smux_rx_handle_pkt_payload(const unsigned char *data, |
| int len, int *used, int flag) |
| { |
| int remaining; |
| |
| if (flag) { |
| pr_err("%s: TTY RX error %d\n", __func__, flag); |
| smux_enter_reset(); |
| smux.rx_state = SMUX_RX_FAILURE; |
| ++*used; |
| return; |
| } |
| |
| /* copy data into rx buffer */ |
| if (smux.pkt_remain < (len - *used)) |
| remaining = smux.pkt_remain; |
| else |
| remaining = len - *used; |
| |
| memcpy(&smux.recv_buf[smux.recv_len], &data[*used], remaining); |
| smux.recv_len += remaining; |
| smux.pkt_remain -= remaining; |
| *used += remaining; |
| |
| if (smux.pkt_remain == 0) { |
| /* complete packet received */ |
| smux_deserialize(smux.recv_buf, smux.recv_len); |
| smux.rx_state = SMUX_RX_IDLE; |
| } |
| } |
| |
| /** |
| * Feed data to the receive state machine. |
| * |
| * @data Pointer to data block |
| * @len Length of data |
| * @flag TTY_NORMAL (0) for no error, otherwise TTY Error Flag |
| */ |
| void smux_rx_state_machine(const unsigned char *data, |
| int len, int flag) |
| { |
| struct smux_rx_worker_data work; |
| |
| work.data = data; |
| work.len = len; |
| work.flag = flag; |
| INIT_WORK_ONSTACK(&work.work, smux_rx_worker); |
| work.work_complete = COMPLETION_INITIALIZER_ONSTACK(work.work_complete); |
| |
| queue_work(smux_rx_wq, &work.work); |
| wait_for_completion(&work.work_complete); |
| } |
| |
| /** |
| * Add channel to transmit-ready list and trigger transmit worker. |
| * |
| * @ch Channel to add |
| */ |
| static void list_channel(struct smux_lch_t *ch) |
| { |
| unsigned long flags; |
| |
| SMUX_DBG("%s: listing channel %d\n", |
| __func__, ch->lcid); |
| |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| spin_lock(&ch->tx_lock_lhb2); |
| smux.tx_activity_flag = 1; |
| if (list_empty(&ch->tx_ready_list)) |
| list_add_tail(&ch->tx_ready_list, &smux.lch_tx_ready_list); |
| spin_unlock(&ch->tx_lock_lhb2); |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| queue_work(smux_tx_wq, &smux_tx_work); |
| } |
| |
| /** |
| * Transmit packet on correct transport and then perform client |
| * notification. |
| * |
| * @ch Channel to transmit on |
| * @pkt Packet to transmit |
| */ |
| static void smux_tx_pkt(struct smux_lch_t *ch, struct smux_pkt_t *pkt) |
| { |
| union notifier_metadata meta_write; |
| int ret; |
| |
| if (ch && pkt) { |
| SMUX_LOG_PKT_TX(pkt); |
| if (ch->local_mode == SMUX_LCH_MODE_LOCAL_LOOPBACK) |
| ret = smux_tx_loopback(pkt); |
| else |
| ret = smux_tx_tty(pkt); |
| |
| if (pkt->hdr.cmd == SMUX_CMD_DATA) { |
| /* notify write-done */ |
| meta_write.write.pkt_priv = pkt->priv; |
| meta_write.write.buffer = pkt->payload; |
| meta_write.write.len = pkt->hdr.payload_len; |
| if (ret >= 0) { |
| SMUX_DBG("%s: PKT write done", __func__); |
| schedule_notify(ch->lcid, SMUX_WRITE_DONE, |
| &meta_write); |
| } else { |
| pr_err("%s: failed to write pkt %d\n", |
| __func__, ret); |
| schedule_notify(ch->lcid, SMUX_WRITE_FAIL, |
| &meta_write); |
| } |
| } |
| } |
| } |
| |
| /** |
| * Flush pending TTY TX data. |
| */ |
| static void smux_flush_tty(void) |
| { |
| if (!smux.tty) { |
| pr_err("%s: ldisc not loaded\n", __func__); |
| return; |
| } |
| |
| tty_wait_until_sent(smux.tty, |
| msecs_to_jiffies(TTY_BUFFER_FULL_WAIT_MS)); |
| |
| if (tty_chars_in_buffer(smux.tty) > 0) |
| pr_err("%s: unable to flush UART queue\n", __func__); |
| } |
| |
| /** |
| * Purge TX queue for logical channel. |
| * |
| * @ch Logical channel pointer |
| * |
| * Must be called with the following spinlocks locked: |
| * state_lock_lhb1 |
| * tx_lock_lhb2 |
| */ |
| static void smux_purge_ch_tx_queue(struct smux_lch_t *ch) |
| { |
| struct smux_pkt_t *pkt; |
| int send_disconnect = 0; |
| |
| while (!list_empty(&ch->tx_queue)) { |
| pkt = list_first_entry(&ch->tx_queue, struct smux_pkt_t, |
| list); |
| list_del(&pkt->list); |
| |
| if (pkt->hdr.cmd == SMUX_CMD_OPEN_LCH) { |
| /* Open was never sent, just force to closed state */ |
| ch->local_state = SMUX_LCH_LOCAL_CLOSED; |
| send_disconnect = 1; |
| } else if (pkt->hdr.cmd == SMUX_CMD_DATA) { |
| /* Notify client of failed write */ |
| union notifier_metadata meta_write; |
| |
| meta_write.write.pkt_priv = pkt->priv; |
| meta_write.write.buffer = pkt->payload; |
| meta_write.write.len = pkt->hdr.payload_len; |
| schedule_notify(ch->lcid, SMUX_WRITE_FAIL, &meta_write); |
| } |
| smux_free_pkt(pkt); |
| } |
| |
| if (send_disconnect) { |
| union notifier_metadata meta_disconnected; |
| |
| meta_disconnected.disconnected.is_ssr = smux.in_reset; |
| schedule_notify(ch->lcid, SMUX_DISCONNECTED, |
| &meta_disconnected); |
| } |
| } |
| |
| /** |
| * Power-up the UART. |
| */ |
| static void smux_uart_power_on(void) |
| { |
| struct uart_state *state; |
| |
| if (!smux.tty || !smux.tty->driver_data) { |
| pr_err("%s: unable to find UART port for tty %p\n", |
| __func__, smux.tty); |
| return; |
| } |
| state = smux.tty->driver_data; |
| msm_hs_request_clock_on(state->uart_port); |
| } |
| |
| /** |
| * Power down the UART. |
| */ |
| static void smux_uart_power_off(void) |
| { |
| struct uart_state *state; |
| |
| if (!smux.tty || !smux.tty->driver_data) { |
| pr_err("%s: unable to find UART port for tty %p\n", |
| __func__, smux.tty); |
| return; |
| } |
| state = smux.tty->driver_data; |
| msm_hs_request_clock_off(state->uart_port); |
| } |
| |
| /** |
| * TX Wakeup Worker |
| * |
| * @work Not used |
| * |
| * Do an exponential back-off wakeup sequence with a maximum period |
| * of approximately 1 second (1 << 20 microseconds). |
| */ |
| static void smux_wakeup_worker(struct work_struct *work) |
| { |
| unsigned long flags; |
| unsigned wakeup_delay; |
| int complete = 0; |
| |
| while (!smux.in_reset) { |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (smux.power_state == SMUX_PWR_ON) { |
| /* wakeup complete */ |
| complete = 1; |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| break; |
| } else { |
| /* retry */ |
| wakeup_delay = smux.pwr_wakeup_delay_us; |
| smux.pwr_wakeup_delay_us <<= 1; |
| if (smux.pwr_wakeup_delay_us > SMUX_WAKEUP_DELAY_MAX) |
| smux.pwr_wakeup_delay_us = |
| SMUX_WAKEUP_DELAY_MAX; |
| } |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| SMUX_DBG("%s: triggering wakeup\n", __func__); |
| smux_send_byte(SMUX_WAKEUP_REQ); |
| |
| if (wakeup_delay < SMUX_WAKEUP_DELAY_MIN) { |
| SMUX_DBG("%s: sleeping for %u us\n", __func__, |
| wakeup_delay); |
| usleep_range(wakeup_delay, 2*wakeup_delay); |
| } else { |
| /* schedule delayed work */ |
| SMUX_DBG("%s: scheduling delayed wakeup in %u ms\n", |
| __func__, wakeup_delay / 1000); |
| queue_delayed_work(smux_tx_wq, |
| &smux_wakeup_delayed_work, |
| msecs_to_jiffies(wakeup_delay / 1000)); |
| break; |
| } |
| } |
| |
| if (complete) { |
| SMUX_DBG("%s: wakeup complete\n", __func__); |
| /* |
| * Cancel any pending retry. This avoids a race condition with |
| * a new power-up request because: |
| * 1) this worker doesn't modify the state |
| * 2) this worker is processed on the same single-threaded |
| * workqueue as new TX wakeup requests |
| */ |
| cancel_delayed_work(&smux_wakeup_delayed_work); |
| } |
| } |
| |
| |
| /** |
| * Inactivity timeout worker. Periodically scheduled when link is active. |
| * When it detects inactivity, it will power-down the UART link. |
| * |
| * @work Work structure (not used) |
| */ |
| static void smux_inactivity_worker(struct work_struct *work) |
| { |
| struct smux_pkt_t *pkt; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&smux.rx_lock_lha1, flags); |
| spin_lock(&smux.tx_lock_lha2); |
| |
| if (!smux.tx_activity_flag && !smux.rx_activity_flag) { |
| /* no activity */ |
| if (smux.powerdown_enabled) { |
| if (smux.power_state == SMUX_PWR_ON) { |
| /* start power-down sequence */ |
| pkt = smux_alloc_pkt(); |
| if (pkt) { |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, |
| SMUX_PWR_TURNING_OFF); |
| smux.power_state = SMUX_PWR_TURNING_OFF; |
| |
| /* send power-down request */ |
| pkt->hdr.cmd = SMUX_CMD_PWR_CTL; |
| pkt->hdr.flags = 0; |
| pkt->hdr.lcid = SMUX_BROADCAST_LCID; |
| list_add_tail(&pkt->list, |
| &smux.power_queue); |
| queue_work(smux_tx_wq, &smux_tx_work); |
| } else { |
| pr_err("%s: packet alloc failed\n", |
| __func__); |
| } |
| } |
| } else { |
| SMUX_DBG("%s: link inactive, but powerdown disabled\n", |
| __func__); |
| } |
| } |
| smux.tx_activity_flag = 0; |
| smux.rx_activity_flag = 0; |
| |
| if (smux.power_state == SMUX_PWR_OFF_FLUSH) { |
| /* ready to power-down the UART */ |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, SMUX_PWR_OFF); |
| smux.power_state = SMUX_PWR_OFF; |
| |
| /* if data is pending, schedule a new wakeup */ |
| if (!list_empty(&smux.lch_tx_ready_list) || |
| !list_empty(&smux.power_queue)) |
| queue_work(smux_tx_wq, &smux_tx_work); |
| |
| spin_unlock(&smux.tx_lock_lha2); |
| spin_unlock_irqrestore(&smux.rx_lock_lha1, flags); |
| |
| /* flush UART output queue and power down */ |
| smux_flush_tty(); |
| smux_uart_power_off(); |
| } else { |
| spin_unlock(&smux.tx_lock_lha2); |
| spin_unlock_irqrestore(&smux.rx_lock_lha1, flags); |
| } |
| |
| /* reschedule inactivity worker */ |
| if (smux.power_state != SMUX_PWR_OFF) |
| queue_delayed_work(smux_tx_wq, &smux_delayed_inactivity_work, |
| msecs_to_jiffies(SMUX_INACTIVITY_TIMEOUT_MS)); |
| } |
| |
| /** |
| * Remove RX retry packet from channel and free it. |
| * |
| * Must be called with state_lock_lhb1 locked. |
| * |
| * @ch Channel for retry packet |
| * @retry Retry packet to remove |
| */ |
| void smux_remove_rx_retry(struct smux_lch_t *ch, |
| struct smux_rx_pkt_retry *retry) |
| { |
| list_del(&retry->rx_retry_list); |
| --ch->rx_retry_queue_cnt; |
| smux_free_pkt(retry->pkt); |
| kfree(retry); |
| } |
| |
| /** |
| * RX worker handles all receive operations. |
| * |
| * @work Work structure contained in TBD structure |
| */ |
| static void smux_rx_worker(struct work_struct *work) |
| { |
| unsigned long flags; |
| int used; |
| int initial_rx_state; |
| struct smux_rx_worker_data *w; |
| const unsigned char *data; |
| int len; |
| int flag; |
| |
| w = container_of(work, struct smux_rx_worker_data, work); |
| data = w->data; |
| len = w->len; |
| flag = w->flag; |
| |
| spin_lock_irqsave(&smux.rx_lock_lha1, flags); |
| smux.rx_activity_flag = 1; |
| spin_unlock_irqrestore(&smux.rx_lock_lha1, flags); |
| |
| SMUX_DBG("%s: %p, len=%d, flag=%d\n", __func__, data, len, flag); |
| used = 0; |
| do { |
| SMUX_DBG("%s: state %d; %d of %d\n", |
| __func__, smux.rx_state, used, len); |
| initial_rx_state = smux.rx_state; |
| |
| switch (smux.rx_state) { |
| case SMUX_RX_IDLE: |
| smux_rx_handle_idle(data, len, &used, flag); |
| break; |
| case SMUX_RX_MAGIC: |
| smux_rx_handle_magic(data, len, &used, flag); |
| break; |
| case SMUX_RX_HDR: |
| smux_rx_handle_hdr(data, len, &used, flag); |
| break; |
| case SMUX_RX_PAYLOAD: |
| smux_rx_handle_pkt_payload(data, len, &used, flag); |
| break; |
| default: |
| SMUX_DBG("%s: invalid state %d\n", |
| __func__, smux.rx_state); |
| smux.rx_state = SMUX_RX_IDLE; |
| break; |
| } |
| } while (used < len || smux.rx_state != initial_rx_state); |
| |
| complete(&w->work_complete); |
| } |
| |
| /** |
| * RX Retry worker handles retrying get_rx_buffer calls that previously failed |
| * because the client was not ready (-EAGAIN). |
| * |
| * @work Work structure contained in smux_lch_t structure |
| */ |
| static void smux_rx_retry_worker(struct work_struct *work) |
| { |
| struct smux_lch_t *ch; |
| struct smux_rx_pkt_retry *retry; |
| union notifier_metadata metadata; |
| int tmp; |
| unsigned long flags; |
| |
| ch = container_of(work, struct smux_lch_t, rx_retry_work.work); |
| |
| /* get next retry packet */ |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| if (ch->local_state != SMUX_LCH_LOCAL_OPENED) { |
| /* port has been closed - remove all retries */ |
| while (!list_empty(&ch->rx_retry_queue)) { |
| retry = list_first_entry(&ch->rx_retry_queue, |
| struct smux_rx_pkt_retry, |
| rx_retry_list); |
| smux_remove_rx_retry(ch, retry); |
| } |
| } |
| |
| if (list_empty(&ch->rx_retry_queue)) { |
| SMUX_DBG("%s: retry list empty for channel %d\n", |
| __func__, ch->lcid); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| return; |
| } |
| retry = list_first_entry(&ch->rx_retry_queue, |
| struct smux_rx_pkt_retry, |
| rx_retry_list); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| SMUX_DBG("%s: retrying rx pkt %p\n", __func__, retry); |
| metadata.read.pkt_priv = 0; |
| metadata.read.buffer = 0; |
| tmp = ch->get_rx_buffer(ch->priv, |
| (void **)&metadata.read.pkt_priv, |
| (void **)&metadata.read.buffer, |
| retry->pkt->hdr.payload_len); |
| if (tmp == 0 && metadata.read.buffer) { |
| /* have valid RX buffer */ |
| memcpy(metadata.read.buffer, retry->pkt->payload, |
| retry->pkt->hdr.payload_len); |
| metadata.read.len = retry->pkt->hdr.payload_len; |
| |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| smux_remove_rx_retry(ch, retry); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| schedule_notify(ch->lcid, SMUX_READ_DONE, &metadata); |
| } else if (tmp == -EAGAIN || |
| (tmp == 0 && !metadata.read.buffer)) { |
| /* retry again */ |
| retry->timeout_in_ms <<= 1; |
| if (retry->timeout_in_ms > SMUX_RX_RETRY_MAX_MS) { |
| /* timed out */ |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| smux_remove_rx_retry(ch, retry); |
| schedule_notify(ch->lcid, SMUX_READ_FAIL, NULL); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| } |
| } else { |
| /* client error - drop packet */ |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| smux_remove_rx_retry(ch, retry); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| schedule_notify(ch->lcid, SMUX_READ_FAIL, NULL); |
| } |
| |
| /* schedule next retry */ |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| if (!list_empty(&ch->rx_retry_queue)) { |
| retry = list_first_entry(&ch->rx_retry_queue, |
| struct smux_rx_pkt_retry, |
| rx_retry_list); |
| queue_delayed_work(smux_rx_wq, &ch->rx_retry_work, |
| msecs_to_jiffies(retry->timeout_in_ms)); |
| } |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| } |
| |
| /** |
| * Transmit worker handles serializing and transmitting packets onto the |
| * underlying transport. |
| * |
| * @work Work structure (not used) |
| */ |
| static void smux_tx_worker(struct work_struct *work) |
| { |
| struct smux_pkt_t *pkt; |
| struct smux_lch_t *ch; |
| unsigned low_wm_notif; |
| unsigned lcid; |
| unsigned long flags; |
| |
| |
| /* |
| * Transmit packets in round-robin fashion based upon ready |
| * channels. |
| * |
| * To eliminate the need to hold a lock for the entire |
| * iteration through the channel ready list, the head of the |
| * ready-channel list is always the next channel to be |
| * processed. To send a packet, the first valid packet in |
| * the head channel is removed and the head channel is then |
| * rescheduled at the end of the queue by removing it and |
| * inserting after the tail. The locks can then be released |
| * while the packet is processed. |
| */ |
| while (!smux.in_reset) { |
| pkt = NULL; |
| low_wm_notif = 0; |
| |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| |
| /* handle wakeup if needed */ |
| if (smux.power_state == SMUX_PWR_OFF) { |
| if (!list_empty(&smux.lch_tx_ready_list) || |
| !list_empty(&smux.power_queue)) { |
| /* data to transmit, do wakeup */ |
| smux.pwr_wakeup_delay_us = 1; |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, |
| SMUX_PWR_TURNING_ON); |
| smux.power_state = SMUX_PWR_TURNING_ON; |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, |
| flags); |
| smux_uart_power_on(); |
| queue_work(smux_tx_wq, &smux_wakeup_work); |
| } else { |
| /* no activity -- stay asleep */ |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, |
| flags); |
| } |
| break; |
| } |
| |
| /* process any pending power packets */ |
| if (!list_empty(&smux.power_queue)) { |
| pkt = list_first_entry(&smux.power_queue, |
| struct smux_pkt_t, list); |
| list_del(&pkt->list); |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| /* send the packet */ |
| SMUX_LOG_PKT_TX(pkt); |
| if (!smux_byte_loopback) { |
| smux_tx_tty(pkt); |
| smux_flush_tty(); |
| } else { |
| smux_tx_loopback(pkt); |
| } |
| |
| /* Adjust power state if this is a flush command */ |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (smux.power_state == SMUX_PWR_TURNING_OFF_FLUSH && |
| pkt->hdr.cmd == SMUX_CMD_PWR_CTL && |
| (pkt->hdr.flags & SMUX_CMD_PWR_CTL_ACK)) { |
| SMUX_PWR("%s: Power %d->%d\n", __func__, |
| smux.power_state, |
| SMUX_PWR_OFF_FLUSH); |
| smux.power_state = SMUX_PWR_OFF_FLUSH; |
| queue_work(smux_tx_wq, &smux_inactivity_work); |
| } |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| smux_free_pkt(pkt); |
| continue; |
| } |
| |
| /* get the next ready channel */ |
| if (list_empty(&smux.lch_tx_ready_list)) { |
| /* no ready channels */ |
| SMUX_DBG("%s: no more ready channels, exiting\n", |
| __func__); |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| break; |
| } |
| smux.tx_activity_flag = 1; |
| |
| if (smux.power_state != SMUX_PWR_ON) { |
| /* channel not ready to transmit */ |
| SMUX_DBG("%s: can not tx with power state %d\n", |
| __func__, |
| smux.power_state); |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| break; |
| } |
| |
| /* get the next packet to send and rotate channel list */ |
| ch = list_first_entry(&smux.lch_tx_ready_list, |
| struct smux_lch_t, |
| tx_ready_list); |
| |
| spin_lock(&ch->state_lock_lhb1); |
| spin_lock(&ch->tx_lock_lhb2); |
| if (!list_empty(&ch->tx_queue)) { |
| /* |
| * If remote TX flow control is enabled or |
| * the channel is not fully opened, then only |
| * send command packets. |
| */ |
| if (ch->tx_flow_control || !IS_FULLY_OPENED(ch)) { |
| struct smux_pkt_t *curr; |
| list_for_each_entry(curr, &ch->tx_queue, list) { |
| if (curr->hdr.cmd != SMUX_CMD_DATA) { |
| pkt = curr; |
| break; |
| } |
| } |
| } else { |
| /* get next cmd/data packet to send */ |
| pkt = list_first_entry(&ch->tx_queue, |
| struct smux_pkt_t, list); |
| } |
| } |
| |
| if (pkt) { |
| list_del(&pkt->list); |
| |
| /* update packet stats */ |
| if (pkt->hdr.cmd == SMUX_CMD_DATA) { |
| --ch->tx_pending_data_cnt; |
| if (ch->notify_lwm && |
| ch->tx_pending_data_cnt |
| <= SMUX_WM_LOW) { |
| ch->notify_lwm = 0; |
| low_wm_notif = 1; |
| } |
| } |
| |
| /* advance to the next ready channel */ |
| list_rotate_left(&smux.lch_tx_ready_list); |
| } else { |
| /* no data in channel to send, remove from ready list */ |
| list_del(&ch->tx_ready_list); |
| INIT_LIST_HEAD(&ch->tx_ready_list); |
| } |
| lcid = ch->lcid; |
| spin_unlock(&ch->tx_lock_lhb2); |
| spin_unlock(&ch->state_lock_lhb1); |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| if (low_wm_notif) |
| schedule_notify(lcid, SMUX_LOW_WM_HIT, NULL); |
| |
| /* send the packet */ |
| smux_tx_pkt(ch, pkt); |
| smux_free_pkt(pkt); |
| } |
| } |
| |
| |
| /**********************************************************************/ |
| /* Kernel API */ |
| /**********************************************************************/ |
| |
| /** |
| * Set or clear channel option using the SMUX_CH_OPTION_* channel |
| * flags. |
| * |
| * @lcid Logical channel ID |
| * @set Options to set |
| * @clear Options to clear |
| * |
| * @returns 0 for success, < 0 for failure |
| */ |
| int msm_smux_set_ch_option(uint8_t lcid, uint32_t set, uint32_t clear) |
| { |
| unsigned long flags; |
| struct smux_lch_t *ch; |
| int tx_ready = 0; |
| int ret = 0; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| /* Local loopback mode */ |
| if (set & SMUX_CH_OPTION_LOCAL_LOOPBACK) |
| ch->local_mode = SMUX_LCH_MODE_LOCAL_LOOPBACK; |
| |
| if (clear & SMUX_CH_OPTION_LOCAL_LOOPBACK) |
| ch->local_mode = SMUX_LCH_MODE_NORMAL; |
| |
| /* Remote loopback mode */ |
| if (set & SMUX_CH_OPTION_REMOTE_LOOPBACK) |
| ch->local_mode = SMUX_LCH_MODE_REMOTE_LOOPBACK; |
| |
| if (clear & SMUX_CH_OPTION_REMOTE_LOOPBACK) |
| ch->local_mode = SMUX_LCH_MODE_NORMAL; |
| |
| /* Flow control */ |
| if (set & SMUX_CH_OPTION_REMOTE_TX_STOP) { |
| ch->local_tiocm |= SMUX_CMD_STATUS_FLOW_CNTL; |
| ret = smux_send_status_cmd(ch); |
| tx_ready = 1; |
| } |
| |
| if (clear & SMUX_CH_OPTION_REMOTE_TX_STOP) { |
| ch->local_tiocm &= ~SMUX_CMD_STATUS_FLOW_CNTL; |
| ret = smux_send_status_cmd(ch); |
| tx_ready = 1; |
| } |
| |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| if (tx_ready) |
| list_channel(ch); |
| |
| return ret; |
| } |
| |
| /** |
| * Starts the opening sequence for a logical channel. |
| * |
| * @lcid Logical channel ID |
| * @priv Free for client usage |
| * @notify Event notification function |
| * @get_rx_buffer Function used to provide a receive buffer to SMUX |
| * |
| * @returns 0 for success, <0 otherwise |
| * |
| * A channel must be fully closed (either not previously opened or |
| * msm_smux_close() has been called and the SMUX_DISCONNECTED has been |
| * received. |
| * |
| * One the remote side is opened, the client will receive a SMUX_CONNECTED |
| * event. |
| */ |
| int msm_smux_open(uint8_t lcid, void *priv, |
| void (*notify)(void *priv, int event_type, const void *metadata), |
| int (*get_rx_buffer)(void *priv, void **pkt_priv, void **buffer, |
| int size)) |
| { |
| int ret; |
| struct smux_lch_t *ch; |
| struct smux_pkt_t *pkt; |
| int tx_ready = 0; |
| unsigned long flags; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| if (ch->local_state == SMUX_LCH_LOCAL_CLOSING) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| if (ch->local_state != SMUX_LCH_LOCAL_CLOSED) { |
| pr_err("%s: open lcid %d local state %x invalid\n", |
| __func__, lcid, ch->local_state); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| SMUX_DBG("lcid %d local state 0x%x -> 0x%x\n", lcid, |
| ch->local_state, |
| SMUX_LCH_LOCAL_OPENING); |
| |
| ch->local_state = SMUX_LCH_LOCAL_OPENING; |
| |
| ch->priv = priv; |
| ch->notify = notify; |
| ch->get_rx_buffer = get_rx_buffer; |
| ret = 0; |
| |
| /* Send Open Command */ |
| pkt = smux_alloc_pkt(); |
| if (!pkt) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| pkt->hdr.magic = SMUX_MAGIC; |
| pkt->hdr.cmd = SMUX_CMD_OPEN_LCH; |
| pkt->hdr.flags = SMUX_CMD_OPEN_POWER_COLLAPSE; |
| if (ch->local_mode == SMUX_LCH_MODE_REMOTE_LOOPBACK) |
| pkt->hdr.flags |= SMUX_CMD_OPEN_REMOTE_LOOPBACK; |
| pkt->hdr.lcid = lcid; |
| pkt->hdr.payload_len = 0; |
| pkt->hdr.pad_len = 0; |
| smux_tx_queue(pkt, ch, 0); |
| tx_ready = 1; |
| |
| out: |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| if (tx_ready) |
| list_channel(ch); |
| return ret; |
| } |
| |
| /** |
| * Starts the closing sequence for a logical channel. |
| * |
| * @lcid Logical channel ID |
| * |
| * @returns 0 for success, <0 otherwise |
| * |
| * Once the close event has been acknowledge by the remote side, the client |
| * will receive a SMUX_DISCONNECTED notification. |
| */ |
| int msm_smux_close(uint8_t lcid) |
| { |
| int ret = 0; |
| struct smux_lch_t *ch; |
| struct smux_pkt_t *pkt; |
| int tx_ready = 0; |
| unsigned long flags; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| ch->local_tiocm = 0x0; |
| ch->remote_tiocm = 0x0; |
| ch->tx_pending_data_cnt = 0; |
| ch->notify_lwm = 0; |
| |
| /* Purge TX queue */ |
| spin_lock(&ch->tx_lock_lhb2); |
| smux_purge_ch_tx_queue(ch); |
| spin_unlock(&ch->tx_lock_lhb2); |
| |
| /* Send Close Command */ |
| if (ch->local_state == SMUX_LCH_LOCAL_OPENED || |
| ch->local_state == SMUX_LCH_LOCAL_OPENING) { |
| SMUX_DBG("lcid %d local state 0x%x -> 0x%x\n", lcid, |
| ch->local_state, |
| SMUX_LCH_LOCAL_CLOSING); |
| |
| ch->local_state = SMUX_LCH_LOCAL_CLOSING; |
| pkt = smux_alloc_pkt(); |
| if (pkt) { |
| pkt->hdr.cmd = SMUX_CMD_CLOSE_LCH; |
| pkt->hdr.flags = 0; |
| pkt->hdr.lcid = lcid; |
| pkt->hdr.payload_len = 0; |
| pkt->hdr.pad_len = 0; |
| smux_tx_queue(pkt, ch, 0); |
| tx_ready = 1; |
| } else { |
| pr_err("%s: pkt allocation failed\n", __func__); |
| ret = -ENOMEM; |
| } |
| |
| /* Purge RX retry queue */ |
| if (ch->rx_retry_queue_cnt) |
| queue_delayed_work(smux_rx_wq, &ch->rx_retry_work, 0); |
| } |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| if (tx_ready) |
| list_channel(ch); |
| |
| return ret; |
| } |
| |
| /** |
| * Write data to a logical channel. |
| * |
| * @lcid Logical channel ID |
| * @pkt_priv Client data that will be returned with the SMUX_WRITE_DONE or |
| * SMUX_WRITE_FAIL notification. |
| * @data Data to write |
| * @len Length of @data |
| * |
| * @returns 0 for success, <0 otherwise |
| * |
| * Data may be written immediately after msm_smux_open() is called, |
| * but the data will wait in the transmit queue until the channel has |
| * been fully opened. |
| * |
| * Once the data has been written, the client will receive either a completion |
| * (SMUX_WRITE_DONE) or a failure notice (SMUX_WRITE_FAIL). |
| */ |
| int msm_smux_write(uint8_t lcid, void *pkt_priv, const void *data, int len) |
| { |
| struct smux_lch_t *ch; |
| struct smux_pkt_t *pkt; |
| int tx_ready = 0; |
| unsigned long flags; |
| int ret; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| if (ch->local_state != SMUX_LCH_LOCAL_OPENED && |
| ch->local_state != SMUX_LCH_LOCAL_OPENING) { |
| pr_err("%s: hdr.invalid local state %d channel %d\n", |
| __func__, ch->local_state, lcid); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (len > SMUX_MAX_PKT_SIZE - sizeof(struct smux_hdr_t)) { |
| pr_err("%s: payload %d too large\n", |
| __func__, len); |
| ret = -E2BIG; |
| goto out; |
| } |
| |
| pkt = smux_alloc_pkt(); |
| if (!pkt) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| pkt->hdr.cmd = SMUX_CMD_DATA; |
| pkt->hdr.lcid = lcid; |
| pkt->hdr.flags = 0; |
| pkt->hdr.payload_len = len; |
| pkt->payload = (void *)data; |
| pkt->priv = pkt_priv; |
| pkt->hdr.pad_len = 0; |
| |
| spin_lock(&ch->tx_lock_lhb2); |
| /* verify high watermark */ |
| SMUX_DBG("%s: pending %d", __func__, ch->tx_pending_data_cnt); |
| |
| if (ch->tx_pending_data_cnt >= SMUX_WM_HIGH) { |
| pr_err("%s: ch %d high watermark %d exceeded %d\n", |
| __func__, lcid, SMUX_WM_HIGH, |
| ch->tx_pending_data_cnt); |
| ret = -EAGAIN; |
| goto out_inner; |
| } |
| |
| /* queue packet for transmit */ |
| if (++ch->tx_pending_data_cnt == SMUX_WM_HIGH) { |
| ch->notify_lwm = 1; |
| pr_err("%s: high watermark hit\n", __func__); |
| schedule_notify(lcid, SMUX_HIGH_WM_HIT, NULL); |
| } |
| list_add_tail(&pkt->list, &ch->tx_queue); |
| |
| /* add to ready list */ |
| if (IS_FULLY_OPENED(ch)) |
| tx_ready = 1; |
| |
| ret = 0; |
| |
| out_inner: |
| spin_unlock(&ch->tx_lock_lhb2); |
| |
| out: |
| if (ret) |
| smux_free_pkt(pkt); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| if (tx_ready) |
| list_channel(ch); |
| |
| return ret; |
| } |
| |
| /** |
| * Returns true if the TX queue is currently full (high water mark). |
| * |
| * @lcid Logical channel ID |
| * @returns 0 if channel is not full |
| * 1 if it is full |
| * < 0 for error |
| */ |
| int msm_smux_is_ch_full(uint8_t lcid) |
| { |
| struct smux_lch_t *ch; |
| unsigned long flags; |
| int is_full = 0; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| |
| spin_lock_irqsave(&ch->tx_lock_lhb2, flags); |
| if (ch->tx_pending_data_cnt >= SMUX_WM_HIGH) |
| is_full = 1; |
| spin_unlock_irqrestore(&ch->tx_lock_lhb2, flags); |
| |
| return is_full; |
| } |
| |
| /** |
| * Returns true if the TX queue has space for more packets it is at or |
| * below the low water mark). |
| * |
| * @lcid Logical channel ID |
| * @returns 0 if channel is above low watermark |
| * 1 if it's at or below the low watermark |
| * < 0 for error |
| */ |
| int msm_smux_is_ch_low(uint8_t lcid) |
| { |
| struct smux_lch_t *ch; |
| unsigned long flags; |
| int is_low = 0; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| |
| spin_lock_irqsave(&ch->tx_lock_lhb2, flags); |
| if (ch->tx_pending_data_cnt <= SMUX_WM_LOW) |
| is_low = 1; |
| spin_unlock_irqrestore(&ch->tx_lock_lhb2, flags); |
| |
| return is_low; |
| } |
| |
| /** |
| * Send TIOCM status update. |
| * |
| * @ch Channel for update |
| * |
| * @returns 0 for success, <0 for failure |
| * |
| * Channel lock must be held before calling. |
| */ |
| static int smux_send_status_cmd(struct smux_lch_t *ch) |
| { |
| struct smux_pkt_t *pkt; |
| |
| if (!ch) |
| return -EINVAL; |
| |
| pkt = smux_alloc_pkt(); |
| if (!pkt) |
| return -ENOMEM; |
| |
| pkt->hdr.lcid = ch->lcid; |
| pkt->hdr.cmd = SMUX_CMD_STATUS; |
| pkt->hdr.flags = ch->local_tiocm; |
| pkt->hdr.payload_len = 0; |
| pkt->hdr.pad_len = 0; |
| smux_tx_queue(pkt, ch, 0); |
| |
| return 0; |
| } |
| |
| /** |
| * Internal helper function for getting the TIOCM status with |
| * state_lock_lhb1 already locked. |
| * |
| * @ch Channel pointer |
| * |
| * @returns TIOCM status |
| */ |
| static long msm_smux_tiocm_get_atomic(struct smux_lch_t *ch) |
| { |
| long status = 0x0; |
| |
| status |= (ch->remote_tiocm & SMUX_CMD_STATUS_RTC) ? TIOCM_DSR : 0; |
| status |= (ch->remote_tiocm & SMUX_CMD_STATUS_RTR) ? TIOCM_CTS : 0; |
| status |= (ch->remote_tiocm & SMUX_CMD_STATUS_RI) ? TIOCM_RI : 0; |
| status |= (ch->remote_tiocm & SMUX_CMD_STATUS_DCD) ? TIOCM_CD : 0; |
| |
| status |= (ch->local_tiocm & SMUX_CMD_STATUS_RTC) ? TIOCM_DTR : 0; |
| status |= (ch->local_tiocm & SMUX_CMD_STATUS_RTR) ? TIOCM_RTS : 0; |
| |
| return status; |
| } |
| |
| /** |
| * Get the TIOCM status bits. |
| * |
| * @lcid Logical channel ID |
| * |
| * @returns >= 0 TIOCM status bits |
| * < 0 Error condition |
| */ |
| long msm_smux_tiocm_get(uint8_t lcid) |
| { |
| struct smux_lch_t *ch; |
| unsigned long flags; |
| long status = 0x0; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| status = msm_smux_tiocm_get_atomic(ch); |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| return status; |
| } |
| |
| /** |
| * Set/clear the TIOCM status bits. |
| * |
| * @lcid Logical channel ID |
| * @set Bits to set |
| * @clear Bits to clear |
| * |
| * @returns 0 for success; < 0 for failure |
| * |
| * If a bit is specified in both the @set and @clear masks, then the clear bit |
| * definition will dominate and the bit will be cleared. |
| */ |
| int msm_smux_tiocm_set(uint8_t lcid, uint32_t set, uint32_t clear) |
| { |
| struct smux_lch_t *ch; |
| unsigned long flags; |
| uint8_t old_status; |
| uint8_t status_set = 0x0; |
| uint8_t status_clear = 0x0; |
| int tx_ready = 0; |
| int ret = 0; |
| |
| if (smux_assert_lch_id(lcid)) |
| return -ENXIO; |
| |
| ch = &smux_lch[lcid]; |
| spin_lock_irqsave(&ch->state_lock_lhb1, flags); |
| |
| status_set |= (set & TIOCM_DTR) ? SMUX_CMD_STATUS_RTC : 0; |
| status_set |= (set & TIOCM_RTS) ? SMUX_CMD_STATUS_RTR : 0; |
| status_set |= (set & TIOCM_RI) ? SMUX_CMD_STATUS_RI : 0; |
| status_set |= (set & TIOCM_CD) ? SMUX_CMD_STATUS_DCD : 0; |
| |
| status_clear |= (clear & TIOCM_DTR) ? SMUX_CMD_STATUS_RTC : 0; |
| status_clear |= (clear & TIOCM_RTS) ? SMUX_CMD_STATUS_RTR : 0; |
| status_clear |= (clear & TIOCM_RI) ? SMUX_CMD_STATUS_RI : 0; |
| status_clear |= (clear & TIOCM_CD) ? SMUX_CMD_STATUS_DCD : 0; |
| |
| old_status = ch->local_tiocm; |
| ch->local_tiocm |= status_set; |
| ch->local_tiocm &= ~status_clear; |
| |
| if (ch->local_tiocm != old_status) { |
| ret = smux_send_status_cmd(ch); |
| tx_ready = 1; |
| } |
| spin_unlock_irqrestore(&ch->state_lock_lhb1, flags); |
| |
| if (tx_ready) |
| list_channel(ch); |
| |
| return ret; |
| } |
| |
| /**********************************************************************/ |
| /* Subsystem Restart */ |
| /**********************************************************************/ |
| static struct notifier_block ssr_notifier = { |
| .notifier_call = ssr_notifier_cb, |
| }; |
| |
| /** |
| * Handle Subsystem Restart (SSR) notifications. |
| * |
| * @this Pointer to ssr_notifier |
| * @code SSR Code |
| * @data Data pointer (not used) |
| */ |
| static int ssr_notifier_cb(struct notifier_block *this, |
| unsigned long code, |
| void *data) |
| { |
| unsigned long flags; |
| int power_off_uart = 0; |
| |
| if (code == SUBSYS_BEFORE_SHUTDOWN) { |
| SMUX_DBG("%s: ssr - before shutdown\n", __func__); |
| mutex_lock(&smux.mutex_lha0); |
| smux.in_reset = 1; |
| mutex_unlock(&smux.mutex_lha0); |
| return NOTIFY_DONE; |
| } else if (code != SUBSYS_AFTER_SHUTDOWN) { |
| return NOTIFY_DONE; |
| } |
| SMUX_DBG("%s: ssr - after shutdown\n", __func__); |
| |
| /* Cleanup channels */ |
| mutex_lock(&smux.mutex_lha0); |
| smux_lch_purge(); |
| if (smux.tty) |
| tty_driver_flush_buffer(smux.tty); |
| |
| /* Power-down UART */ |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (smux.power_state != SMUX_PWR_OFF) { |
| SMUX_PWR("%s: SSR - turning off UART\n", __func__); |
| smux.power_state = SMUX_PWR_OFF; |
| power_off_uart = 1; |
| } |
| smux.powerdown_enabled = 0; |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| if (power_off_uart) |
| smux_uart_power_off(); |
| |
| smux.in_reset = 0; |
| mutex_unlock(&smux.mutex_lha0); |
| |
| return NOTIFY_DONE; |
| } |
| |
| /**********************************************************************/ |
| /* Line Discipline Interface */ |
| /**********************************************************************/ |
| static void smux_pdev_release(struct device *dev) |
| { |
| struct platform_device *pdev; |
| |
| pdev = container_of(dev, struct platform_device, dev); |
| SMUX_DBG("%s: releasing pdev %p '%s'\n", __func__, pdev, pdev->name); |
| memset(&pdev->dev, 0x0, sizeof(pdev->dev)); |
| } |
| |
| static int smuxld_open(struct tty_struct *tty) |
| { |
| int i; |
| int tmp; |
| unsigned long flags; |
| |
| if (!smux.is_initialized) |
| return -ENODEV; |
| |
| mutex_lock(&smux.mutex_lha0); |
| if (smux.ld_open_count) { |
| pr_err("%s: %p multiple instances not supported\n", |
| __func__, tty); |
| mutex_unlock(&smux.mutex_lha0); |
| return -EEXIST; |
| } |
| |
| if (tty->ops->write == NULL) { |
| pr_err("%s: tty->ops->write already NULL\n", __func__); |
| mutex_unlock(&smux.mutex_lha0); |
| return -EINVAL; |
| } |
| |
| /* connect to TTY */ |
| ++smux.ld_open_count; |
| smux.in_reset = 0; |
| smux.tty = tty; |
| tty->disc_data = &smux; |
| tty->receive_room = TTY_RECEIVE_ROOM; |
| tty_driver_flush_buffer(tty); |
| |
| /* power-down the UART if we are idle */ |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (smux.power_state == SMUX_PWR_OFF) { |
| SMUX_PWR("%s: powering off uart\n", __func__); |
| smux.power_state = SMUX_PWR_OFF_FLUSH; |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| queue_work(smux_tx_wq, &smux_inactivity_work); |
| } else { |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| } |
| |
| /* register platform devices */ |
| for (i = 0; i < ARRAY_SIZE(smux_devs); ++i) { |
| SMUX_DBG("%s: register pdev '%s'\n", |
| __func__, smux_devs[i].name); |
| smux_devs[i].dev.release = smux_pdev_release; |
| tmp = platform_device_register(&smux_devs[i]); |
| if (tmp) |
| pr_err("%s: error %d registering device %s\n", |
| __func__, tmp, smux_devs[i].name); |
| } |
| mutex_unlock(&smux.mutex_lha0); |
| return 0; |
| } |
| |
| static void smuxld_close(struct tty_struct *tty) |
| { |
| unsigned long flags; |
| int power_up_uart = 0; |
| int i; |
| |
| SMUX_DBG("%s: ldisc unload\n", __func__); |
| mutex_lock(&smux.mutex_lha0); |
| if (smux.ld_open_count <= 0) { |
| pr_err("%s: invalid ld count %d\n", __func__, |
| smux.ld_open_count); |
| mutex_unlock(&smux.mutex_lha0); |
| return; |
| } |
| smux.in_reset = 1; |
| --smux.ld_open_count; |
| |
| /* Cleanup channels */ |
| smux_lch_purge(); |
| |
| /* Unregister platform devices */ |
| for (i = 0; i < ARRAY_SIZE(smux_devs); ++i) { |
| SMUX_DBG("%s: unregister pdev '%s'\n", |
| __func__, smux_devs[i].name); |
| platform_device_unregister(&smux_devs[i]); |
| } |
| |
| /* Schedule UART power-up if it's down */ |
| spin_lock_irqsave(&smux.tx_lock_lha2, flags); |
| if (smux.power_state == SMUX_PWR_OFF) |
| power_up_uart = 1; |
| smux.power_state = SMUX_PWR_OFF; |
| smux.powerdown_enabled = 0; |
| spin_unlock_irqrestore(&smux.tx_lock_lha2, flags); |
| |
| if (power_up_uart) |
| smux_uart_power_on(); |
| |
| /* Disconnect from TTY */ |
| smux.tty = NULL; |
| mutex_unlock(&smux.mutex_lha0); |
| SMUX_DBG("%s: ldisc complete\n", __func__); |
| } |
| |
| /** |
| * Receive data from TTY Line Discipline. |
| * |
| * @tty TTY structure |
| * @cp Character data |
| * @fp Flag data |
| * @count Size of character and flag data |
| */ |
| void smuxld_receive_buf(struct tty_struct *tty, const unsigned char *cp, |
| char *fp, int count) |
| { |
| int i; |
| int last_idx = 0; |
| const char *tty_name = NULL; |
| char *f; |
| |
| if (smux_debug_mask & MSM_SMUX_DEBUG) |
| print_hex_dump(KERN_INFO, "smux tty rx: ", DUMP_PREFIX_OFFSET, |
| 16, 1, cp, count, true); |
| |
| /* verify error flags */ |
| for (i = 0, f = fp; i < count; ++i, ++f) { |
| if (*f != TTY_NORMAL) { |
| if (tty) |
| tty_name = tty->name; |
| pr_err("%s: TTY %s Error %d (%s)\n", __func__, |
| tty_name, *f, tty_flag_to_str(*f)); |
| |
| /* feed all previous valid data to the parser */ |
| smux_rx_state_machine(cp + last_idx, i - last_idx, |
| TTY_NORMAL); |
| |
| /* feed bad data to parser */ |
| smux_rx_state_machine(cp + i, 1, *f); |
| last_idx = i + 1; |
| } |
| } |
| |
| /* feed data to RX state machine */ |
| smux_rx_state_machine(cp + last_idx, count - last_idx, TTY_NORMAL); |
| } |
| |
| static void smuxld_flush_buffer(struct tty_struct *tty) |
| { |
| pr_err("%s: not supported\n", __func__); |
| } |
| |
| static ssize_t smuxld_chars_in_buffer(struct tty_struct *tty) |
| { |
| pr_err("%s: not supported\n", __func__); |
| return -ENODEV; |
| } |
| |
| static ssize_t smuxld_read(struct tty_struct *tty, struct file *file, |
| unsigned char __user *buf, size_t nr) |
| { |
| pr_err("%s: not supported\n", __func__); |
| return -ENODEV; |
| } |
| |
| static ssize_t smuxld_write(struct tty_struct *tty, struct file *file, |
| const unsigned char *buf, size_t nr) |
| { |
| pr_err("%s: not supported\n", __func__); |
| return -ENODEV; |
| } |
| |
| static int smuxld_ioctl(struct tty_struct *tty, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| pr_err("%s: not supported\n", __func__); |
| return -ENODEV; |
| } |
| |
| static unsigned int smuxld_poll(struct tty_struct *tty, struct file *file, |
| struct poll_table_struct *tbl) |
| { |
| pr_err("%s: not supported\n", __func__); |
| return -ENODEV; |
| } |
| |
| static void smuxld_write_wakeup(struct tty_struct *tty) |
| { |
| pr_err("%s: not supported\n", __func__); |
| } |
| |
| static struct tty_ldisc_ops smux_ldisc_ops = { |
| .owner = THIS_MODULE, |
| .magic = TTY_LDISC_MAGIC, |
| .name = "n_smux", |
| .open = smuxld_open, |
| .close = smuxld_close, |
| .flush_buffer = smuxld_flush_buffer, |
| .chars_in_buffer = smuxld_chars_in_buffer, |
| .read = smuxld_read, |
| .write = smuxld_write, |
| .ioctl = smuxld_ioctl, |
| .poll = smuxld_poll, |
| .receive_buf = smuxld_receive_buf, |
| .write_wakeup = smuxld_write_wakeup |
| }; |
| |
| static int __init smux_init(void) |
| { |
| int ret; |
| |
| mutex_init(&smux.mutex_lha0); |
| |
| spin_lock_init(&smux.rx_lock_lha1); |
| smux.rx_state = SMUX_RX_IDLE; |
| smux.power_state = SMUX_PWR_OFF; |
| smux.pwr_wakeup_delay_us = 1; |
| smux.powerdown_enabled = 0; |
| INIT_LIST_HEAD(&smux.power_queue); |
| smux.rx_activity_flag = 0; |
| smux.tx_activity_flag = 0; |
| smux.recv_len = 0; |
| smux.tty = NULL; |
| smux.ld_open_count = 0; |
| smux.in_reset = 0; |
| smux.is_initialized = 1; |
| smux_byte_loopback = 0; |
| |
| spin_lock_init(&smux.tx_lock_lha2); |
| INIT_LIST_HEAD(&smux.lch_tx_ready_list); |
| |
| ret = tty_register_ldisc(N_SMUX, &smux_ldisc_ops); |
| if (ret != 0) { |
| pr_err("%s: error %d registering line discipline\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| subsys_notif_register_notifier("external_modem", &ssr_notifier); |
| |
| ret = lch_init(); |
| if (ret != 0) { |
| pr_err("%s: lch_init failed\n", __func__); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit smux_exit(void) |
| { |
| int ret; |
| |
| ret = tty_unregister_ldisc(N_SMUX); |
| if (ret != 0) { |
| pr_err("%s error %d unregistering line discipline\n", |
| __func__, ret); |
| return; |
| } |
| } |
| |
| module_init(smux_init); |
| module_exit(smux_exit); |
| |
| MODULE_DESCRIPTION("Serial Mux TTY Line Discipline"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS_LDISC(N_SMUX); |