| /* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/gpio.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <mach/board.h> |
| #include <mach/gpio.h> |
| #include <mach/gpiomux.h> |
| #include <mach/socinfo.h> |
| |
| #define WLAN_CLK 44 |
| #define WLAN_SET 43 |
| #define WLAN_DATA0 42 |
| #define WLAN_DATA1 41 |
| #define WLAN_DATA2 40 |
| |
| #ifdef CONFIG_USB_EHCI_MSM_HSIC |
| static struct gpiomux_setting hsic_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| .dir = GPIOMUX_OUT_LOW, |
| }; |
| |
| static struct gpiomux_setting hsic_act_cfg = { |
| .func = GPIOMUX_FUNC_1, |
| .drv = GPIOMUX_DRV_16MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct msm_gpiomux_config msm_hsic_configs[] = { |
| { |
| .gpio = 115, /* HSIC_STROBE */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &hsic_act_cfg, |
| [GPIOMUX_SUSPENDED] = &hsic_sus_cfg, |
| }, |
| }, |
| { |
| .gpio = 116, /* HSIC_DATA */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &hsic_act_cfg, |
| [GPIOMUX_SUSPENDED] = &hsic_sus_cfg, |
| }, |
| }, |
| }; |
| #endif |
| |
| #define KS8851_IRQ_GPIO 115 |
| |
| #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE) |
| static struct gpiomux_setting gpio_eth_config = { |
| .pull = GPIOMUX_PULL_UP, |
| .drv = GPIOMUX_DRV_2MA, |
| .func = GPIOMUX_FUNC_GPIO, |
| }; |
| |
| static struct msm_gpiomux_config msm_eth_configs[] = { |
| { |
| .gpio = KS8851_IRQ_GPIO, |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &gpio_eth_config, |
| } |
| }, |
| }; |
| #endif |
| |
| static struct gpiomux_setting synaptics_int_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_8MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting synaptics_int_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting synaptics_reset_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting synaptics_reset_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting gpio_keys_active = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting gpio_keys_suspend = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct gpiomux_setting gpio_spi_act_config = { |
| .func = GPIOMUX_FUNC_1, |
| .drv = GPIOMUX_DRV_8MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct gpiomux_setting gpio_spi_cs_act_config = { |
| .func = GPIOMUX_FUNC_1, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| static struct gpiomux_setting gpio_spi_susp_config = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting gpio_spi_cs_eth_config = { |
| .func = GPIOMUX_FUNC_4, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting wcnss_5wire_suspend_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting wcnss_5wire_active_cfg = { |
| .func = GPIOMUX_FUNC_1, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting wcnss_5gpio_suspend_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting wcnss_5gpio_active_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting gpio_i2c_config = { |
| .func = GPIOMUX_FUNC_3, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct msm_gpiomux_config msm_keypad_configs[] __initdata = { |
| { |
| .gpio = 106, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_keys_active, |
| [GPIOMUX_SUSPENDED] = &gpio_keys_suspend, |
| }, |
| }, |
| { |
| .gpio = 107, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_keys_active, |
| [GPIOMUX_SUSPENDED] = &gpio_keys_suspend, |
| }, |
| }, |
| { |
| .gpio = 108, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_keys_active, |
| [GPIOMUX_SUSPENDED] = &gpio_keys_suspend, |
| }, |
| }, |
| }; |
| |
| static struct gpiomux_setting lcd_rst_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_8MA, |
| .pull = GPIOMUX_PULL_UP, |
| .dir = GPIOMUX_OUT_HIGH, |
| }; |
| |
| static struct gpiomux_setting lcd_rst_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct msm_gpiomux_config msm_lcd_configs[] __initdata = { |
| { |
| .gpio = 25, /* LCD Reset */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &lcd_rst_act_cfg, |
| [GPIOMUX_SUSPENDED] = &lcd_rst_sus_cfg, |
| }, |
| }, |
| { |
| .gpio = 109, /* LCD Enable */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &lcd_rst_act_cfg, |
| [GPIOMUX_SUSPENDED] = &lcd_rst_sus_cfg, |
| }, |
| } |
| }; |
| |
| static struct msm_gpiomux_config msm_blsp_configs[] __initdata = { |
| { |
| .gpio = 0, /* BLSP1 QUP1 SPI_DATA_MOSI */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_spi_act_config, |
| [GPIOMUX_SUSPENDED] = &gpio_spi_susp_config, |
| }, |
| }, |
| { |
| .gpio = 1, /* BLSP1 QUP1 SPI_DATA_MISO */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_spi_act_config, |
| [GPIOMUX_SUSPENDED] = &gpio_spi_susp_config, |
| }, |
| }, |
| { |
| .gpio = 3, /* BLSP1 QUP1 SPI_CLK */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_spi_act_config, |
| [GPIOMUX_SUSPENDED] = &gpio_spi_susp_config, |
| }, |
| }, |
| { |
| .gpio = 14, /* BLSP1 QUP4 I2C_SDA */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| { |
| .gpio = 15, /* BLSP1 QUP4 I2C_SCL */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| { |
| .gpio = 18, /* BLSP1 QUP5 I2C_SDA */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| { |
| .gpio = 19, /* BLSP1 QUP5 I2C_SCL */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| { |
| .gpio = 22, /* BLSP1 QUP1 SPI_CS_ETH */ |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &gpio_spi_cs_eth_config, |
| }, |
| }, |
| { /* NFC */ |
| .gpio = 10, /* BLSP1 QUP3 I2C_DAT */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| { /* NFC */ |
| .gpio = 11, /* BLSP1 QUP3 I2C_CLK */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| }; |
| |
| static struct msm_gpiomux_config msm_blsp_spi_cs_config[] __initdata = { |
| { |
| .gpio = 2, /* BLSP1 QUP1 SPI_CS1 */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_spi_cs_act_config, |
| [GPIOMUX_SUSPENDED] = &gpio_spi_susp_config, |
| }, |
| }, |
| }; |
| |
| static struct msm_gpiomux_config msm_synaptics_configs[] __initdata = { |
| { |
| .gpio = 16, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &synaptics_reset_act_cfg, |
| [GPIOMUX_SUSPENDED] = &synaptics_reset_sus_cfg, |
| }, |
| }, |
| { |
| .gpio = 17, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &synaptics_int_act_cfg, |
| [GPIOMUX_SUSPENDED] = &synaptics_int_sus_cfg, |
| }, |
| }, |
| }; |
| |
| static struct gpiomux_setting gpio_nc_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct gpiomux_setting goodix_ldo_en_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting goodix_ldo_en_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting goodix_int_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting goodix_int_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting goodix_reset_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting goodix_reset_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct msm_gpiomux_config msm_skuf_blsp_configs[] __initdata = { |
| { |
| .gpio = 2, /* NC */ |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &gpio_nc_cfg, |
| }, |
| }, |
| { |
| .gpio = 3, /* NC */ |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &gpio_nc_cfg, |
| }, |
| }, |
| { |
| .gpio = 4, /* NC */ |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &gpio_nc_cfg, |
| }, |
| }, |
| { |
| .gpio = 14, /* NC */ |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &gpio_nc_cfg, |
| }, |
| }, |
| }; |
| |
| static struct msm_gpiomux_config msm_skuf_goodix_configs[] __initdata = { |
| { |
| .gpio = 15, /* LDO EN */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &goodix_ldo_en_act_cfg, |
| [GPIOMUX_SUSPENDED] = &goodix_ldo_en_sus_cfg, |
| }, |
| }, |
| { |
| .gpio = 16, /* RESET */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &goodix_reset_act_cfg, |
| [GPIOMUX_SUSPENDED] = &goodix_reset_sus_cfg, |
| }, |
| }, |
| { |
| .gpio = 17, /* INT */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &goodix_int_act_cfg, |
| [GPIOMUX_SUSPENDED] = &goodix_int_sus_cfg, |
| }, |
| }, |
| { |
| .gpio = 18, /* BLSP1 QUP5 I2C_SDA */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| { |
| .gpio = 19, /* BLSP1 QUP5 I2C_SCL */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| }; |
| |
| static struct gpiomux_setting nfc_ldo_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting nfc_ldo_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting nfc_regc_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting nfc_regc_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| .dir = GPIOMUX_OUT_LOW, |
| }; |
| |
| static struct gpiomux_setting nfc_wake_act_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_6MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting nfc_wake_sus_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| .dir = GPIOMUX_OUT_LOW, |
| }; |
| |
| static struct msm_gpiomux_config msm_skuf_nfc_configs[] __initdata = { |
| { /* NFC LDO EN */ |
| .gpio = 0, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &nfc_ldo_act_cfg, |
| [GPIOMUX_SUSPENDED] = &nfc_ldo_sus_cfg, |
| }, |
| }, |
| { /* NFC REGC*/ |
| .gpio = 1, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &nfc_regc_act_cfg, |
| [GPIOMUX_SUSPENDED] = &nfc_regc_sus_cfg, |
| }, |
| }, |
| { /* NFC WAKE */ |
| .gpio = 5, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &nfc_wake_act_cfg, |
| [GPIOMUX_SUSPENDED] = &nfc_wake_sus_cfg, |
| }, |
| }, |
| { /* NFC */ |
| .gpio = 10, /* BLSP1 QUP3 I2C_DAT */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| { /* NFC */ |
| .gpio = 11, /* BLSP1 QUP3 I2C_CLK */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &gpio_i2c_config, |
| [GPIOMUX_SUSPENDED] = &gpio_i2c_config, |
| }, |
| }, |
| }; |
| |
| static struct gpiomux_setting sd_card_det_active_config = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| .dir = GPIOMUX_IN, |
| }; |
| |
| static struct gpiomux_setting sd_card_det_sleep_config = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_UP, |
| .dir = GPIOMUX_IN, |
| }; |
| |
| static struct msm_gpiomux_config sd_card_det __initdata = { |
| .gpio = 38, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &sd_card_det_active_config, |
| [GPIOMUX_SUSPENDED] = &sd_card_det_sleep_config, |
| }, |
| }; |
| |
| static struct msm_gpiomux_config wcnss_5wire_interface[] = { |
| { |
| .gpio = 40, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 41, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 42, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 43, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 44, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5wire_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg, |
| }, |
| }, |
| }; |
| |
| static struct msm_gpiomux_config wcnss_5gpio_interface[] = { |
| { |
| .gpio = 40, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5gpio_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5gpio_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 41, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5gpio_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5gpio_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 42, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5gpio_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5gpio_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 43, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5gpio_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5gpio_suspend_cfg, |
| }, |
| }, |
| { |
| .gpio = 44, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &wcnss_5gpio_active_cfg, |
| [GPIOMUX_SUSPENDED] = &wcnss_5gpio_suspend_cfg, |
| }, |
| }, |
| }; |
| |
| static struct gpiomux_setting gpio_suspend_config[] = { |
| { |
| .func = GPIOMUX_FUNC_GPIO, /* IN-NP */ |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }, |
| { |
| .func = GPIOMUX_FUNC_GPIO, /* O-LOW */ |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| .dir = GPIOMUX_OUT_LOW, |
| }, |
| }; |
| |
| static struct gpiomux_setting cam_settings[] = { |
| { |
| .func = GPIOMUX_FUNC_1, /*active 1*/ /* 0 */ |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }, |
| |
| { |
| .func = GPIOMUX_FUNC_1, /*suspend*/ /* 1 */ |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }, |
| |
| { |
| .func = GPIOMUX_FUNC_1, /*i2c suspend*/ /* 2 */ |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_KEEPER, |
| }, |
| |
| { |
| .func = GPIOMUX_FUNC_GPIO, /*active 0*/ /* 3 */ |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }, |
| |
| { |
| .func = GPIOMUX_FUNC_GPIO, /*suspend 0*/ /* 4 */ |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }, |
| }; |
| |
| |
| static struct msm_gpiomux_config msm_sensor_configs[] __initdata = { |
| { |
| .gpio = 26, /* CAM_MCLK0 */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[0], |
| [GPIOMUX_SUSPENDED] = &cam_settings[1], |
| }, |
| }, |
| { |
| .gpio = 27, /* CAM_MCLK1 */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[0], |
| [GPIOMUX_SUSPENDED] = &cam_settings[1], |
| }, |
| |
| }, |
| { |
| .gpio = 29, /* CCI_I2C_SDA0 */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[0], |
| [GPIOMUX_SUSPENDED] = &gpio_suspend_config[0], |
| }, |
| }, |
| { |
| .gpio = 30, /* CCI_I2C_SCL0 */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[0], |
| [GPIOMUX_SUSPENDED] = &gpio_suspend_config[0], |
| }, |
| }, |
| { |
| .gpio = 36, /* CAM1_STANDBY_N */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[3], |
| [GPIOMUX_SUSPENDED] = &cam_settings[4], |
| }, |
| }, |
| { |
| .gpio = 37, /* CAM1_RST_N */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[3], |
| [GPIOMUX_SUSPENDED] = &cam_settings[4], |
| }, |
| }, |
| { |
| .gpio = 35, /* CAM2_STANDBY_N */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[3], |
| [GPIOMUX_SUSPENDED] = &cam_settings[4], |
| }, |
| }, |
| { |
| .gpio = 28, /* CAM2_RST_N */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[3], |
| [GPIOMUX_SUSPENDED] = &cam_settings[4], |
| }, |
| }, |
| |
| }; |
| |
| static struct msm_gpiomux_config msm_sensor_configs_skuf_plus[] __initdata = { |
| { |
| .gpio = 22, /* CAM1_VDD */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[3], |
| [GPIOMUX_SUSPENDED] = &cam_settings[4], |
| }, |
| }, |
| { |
| .gpio = 34, /* CAM1 VCM_PWDN */ |
| .settings = { |
| [GPIOMUX_ACTIVE] = &cam_settings[3], |
| [GPIOMUX_SUSPENDED] = &cam_settings[4], |
| }, |
| }, |
| }; |
| |
| |
| static struct gpiomux_setting auxpcm_act_cfg = { |
| .func = GPIOMUX_FUNC_1, |
| .drv = GPIOMUX_DRV_8MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct gpiomux_setting auxpcm_sus_cfg = { |
| .func = GPIOMUX_FUNC_1, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct msm_gpiomux_config msm_auxpcm_configs[] __initdata = { |
| { |
| .gpio = 63, |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &auxpcm_sus_cfg, |
| [GPIOMUX_ACTIVE] = &auxpcm_act_cfg, |
| }, |
| }, |
| { |
| .gpio = 64, |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &auxpcm_sus_cfg, |
| [GPIOMUX_ACTIVE] = &auxpcm_act_cfg, |
| }, |
| }, |
| { |
| .gpio = 65, |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &auxpcm_sus_cfg, |
| [GPIOMUX_ACTIVE] = &auxpcm_act_cfg, |
| }, |
| }, |
| { |
| .gpio = 66, |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &auxpcm_sus_cfg, |
| [GPIOMUX_ACTIVE] = &auxpcm_act_cfg, |
| }, |
| }, |
| }; |
| |
| static struct gpiomux_setting usb_otg_sw_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .dir = GPIOMUX_OUT_LOW, |
| }; |
| |
| static struct msm_gpiomux_config usb_otg_sw_configs[] __initdata = { |
| { |
| .gpio = 67, |
| .settings = { |
| [GPIOMUX_SUSPENDED] = &usb_otg_sw_cfg, |
| }, |
| }, |
| }; |
| |
| #ifdef CONFIG_MMC_MSM_SDC3_SUPPORT |
| static struct gpiomux_setting sdc3_clk_actv_cfg = { |
| .func = GPIOMUX_FUNC_2, |
| .drv = GPIOMUX_DRV_8MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct gpiomux_setting sdc3_cmd_data_0_3_actv_cfg = { |
| .func = GPIOMUX_FUNC_2, |
| .drv = GPIOMUX_DRV_8MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct gpiomux_setting sdc3_suspend_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_DOWN, |
| }; |
| |
| static struct gpiomux_setting sdc3_data_1_suspend_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_2MA, |
| .pull = GPIOMUX_PULL_UP, |
| }; |
| |
| static struct msm_gpiomux_config msm8226_sdc3_configs[] __initdata = { |
| { |
| /* DAT3 */ |
| .gpio = 39, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg, |
| [GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg, |
| }, |
| }, |
| { |
| /* DAT2 */ |
| .gpio = 40, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg, |
| [GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg, |
| }, |
| }, |
| { |
| /* DAT1 */ |
| .gpio = 41, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg, |
| [GPIOMUX_SUSPENDED] = &sdc3_data_1_suspend_cfg, |
| }, |
| }, |
| { |
| /* DAT0 */ |
| .gpio = 42, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg, |
| [GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg, |
| }, |
| }, |
| { |
| /* CMD */ |
| .gpio = 43, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &sdc3_cmd_data_0_3_actv_cfg, |
| [GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg, |
| }, |
| }, |
| { |
| /* CLK */ |
| .gpio = 44, |
| .settings = { |
| [GPIOMUX_ACTIVE] = &sdc3_clk_actv_cfg, |
| [GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg, |
| }, |
| }, |
| }; |
| |
| static void msm_gpiomux_sdc3_install(void) |
| { |
| msm_gpiomux_install(msm8226_sdc3_configs, |
| ARRAY_SIZE(msm8226_sdc3_configs)); |
| } |
| #else |
| static void msm_gpiomux_sdc3_install(void) {} |
| #endif /* CONFIG_MMC_MSM_SDC3_SUPPORT */ |
| |
| void __init msm8226_init_gpiomux(void) |
| { |
| int rc; |
| |
| rc = msm_gpiomux_init_dt(); |
| if (rc) { |
| pr_err("%s failed %d\n", __func__, rc); |
| return; |
| } |
| |
| #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE) |
| msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs)); |
| #endif |
| msm_gpiomux_install(msm_keypad_configs, |
| ARRAY_SIZE(msm_keypad_configs)); |
| |
| if (of_board_is_skuf()) |
| msm_gpiomux_install(msm_skuf_blsp_configs, |
| ARRAY_SIZE(msm_skuf_blsp_configs)); |
| else { |
| msm_gpiomux_install(msm_blsp_configs, |
| ARRAY_SIZE(msm_blsp_configs)); |
| if (machine_is_msm8226()) |
| msm_gpiomux_install(msm_blsp_spi_cs_config, |
| ARRAY_SIZE(msm_blsp_spi_cs_config)); |
| } |
| |
| msm_gpiomux_install(wcnss_5wire_interface, |
| ARRAY_SIZE(wcnss_5wire_interface)); |
| |
| msm_gpiomux_install(&sd_card_det, 1); |
| if (of_board_is_skuf()) |
| msm_gpiomux_install(msm_skuf_goodix_configs, |
| ARRAY_SIZE(msm_skuf_goodix_configs)); |
| else |
| msm_gpiomux_install(msm_synaptics_configs, |
| ARRAY_SIZE(msm_synaptics_configs)); |
| |
| if (of_board_is_skuf()) |
| msm_gpiomux_install(msm_skuf_nfc_configs, |
| ARRAY_SIZE(msm_skuf_nfc_configs)); |
| |
| msm_gpiomux_install_nowrite(msm_lcd_configs, |
| ARRAY_SIZE(msm_lcd_configs)); |
| |
| msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs)); |
| |
| if (of_board_is_skuf()) |
| msm_gpiomux_install(msm_sensor_configs_skuf_plus, |
| ARRAY_SIZE(msm_sensor_configs_skuf_plus)); |
| |
| msm_gpiomux_install(msm_auxpcm_configs, |
| ARRAY_SIZE(msm_auxpcm_configs)); |
| |
| if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm()) |
| msm_gpiomux_install(usb_otg_sw_configs, |
| ARRAY_SIZE(usb_otg_sw_configs)); |
| |
| msm_gpiomux_sdc3_install(); |
| |
| /* |
| * HSIC STROBE gpio is also used by the ethernet. Install HSIC |
| * gpio mux config only when HSIC is enabled. HSIC config will |
| * be disabled when ethernet config is enabled. |
| */ |
| #ifdef CONFIG_USB_EHCI_MSM_HSIC |
| if (machine_is_msm8926()) { |
| msm_hsic_configs[0].gpio = 119; /* STROBE */ |
| msm_hsic_configs[1].gpio = 120; /* DATA */ |
| } |
| msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs)); |
| #endif |
| } |
| |
| static void wcnss_switch_to_gpio(void) |
| { |
| /* Switch MUX to GPIO */ |
| msm_gpiomux_install(wcnss_5gpio_interface, |
| ARRAY_SIZE(wcnss_5gpio_interface)); |
| |
| /* Ensure GPIO config */ |
| gpio_direction_input(WLAN_DATA2); |
| gpio_direction_input(WLAN_DATA1); |
| gpio_direction_input(WLAN_DATA0); |
| gpio_direction_output(WLAN_SET, 0); |
| gpio_direction_output(WLAN_CLK, 0); |
| } |
| |
| static void wcnss_switch_to_5wire(void) |
| { |
| msm_gpiomux_install(wcnss_5wire_interface, |
| ARRAY_SIZE(wcnss_5wire_interface)); |
| } |
| |
| u32 wcnss_rf_read_reg(u32 rf_reg_addr) |
| { |
| int count = 0; |
| u32 rf_cmd_and_addr = 0; |
| u32 rf_data_received = 0; |
| u32 rf_bit = 0; |
| |
| wcnss_switch_to_gpio(); |
| |
| /* Reset the signal if it is already being used. */ |
| gpio_set_value(WLAN_SET, 0); |
| gpio_set_value(WLAN_CLK, 0); |
| |
| /* We start with cmd_set high WLAN_SET = 1. */ |
| gpio_set_value(WLAN_SET, 1); |
| |
| gpio_direction_output(WLAN_DATA0, 1); |
| gpio_direction_output(WLAN_DATA1, 1); |
| gpio_direction_output(WLAN_DATA2, 1); |
| |
| gpio_set_value(WLAN_DATA0, 0); |
| gpio_set_value(WLAN_DATA1, 0); |
| gpio_set_value(WLAN_DATA2, 0); |
| |
| /* Prepare command and RF register address that need to sent out. |
| * Make sure that we send only 14 bits from LSB. |
| */ |
| rf_cmd_and_addr = (((WLAN_RF_READ_REG_CMD) | |
| (rf_reg_addr << WLAN_RF_REG_ADDR_START_OFFSET)) & |
| WLAN_RF_READ_CMD_MASK); |
| |
| for (count = 0; count < 5; count++) { |
| gpio_set_value(WLAN_CLK, 0); |
| |
| rf_bit = (rf_cmd_and_addr & 0x1); |
| gpio_set_value(WLAN_DATA0, rf_bit ? 1 : 0); |
| rf_cmd_and_addr = (rf_cmd_and_addr >> 1); |
| |
| rf_bit = (rf_cmd_and_addr & 0x1); |
| gpio_set_value(WLAN_DATA1, rf_bit ? 1 : 0); |
| rf_cmd_and_addr = (rf_cmd_and_addr >> 1); |
| |
| rf_bit = (rf_cmd_and_addr & 0x1); |
| gpio_set_value(WLAN_DATA2, rf_bit ? 1 : 0); |
| rf_cmd_and_addr = (rf_cmd_and_addr >> 1); |
| |
| /* Send the data out WLAN_CLK = 1 */ |
| gpio_set_value(WLAN_CLK, 1); |
| } |
| |
| /* Pull down the clock signal */ |
| gpio_set_value(WLAN_CLK, 0); |
| |
| /* Configure data pins to input IO pins */ |
| gpio_direction_input(WLAN_DATA0); |
| gpio_direction_input(WLAN_DATA1); |
| gpio_direction_input(WLAN_DATA2); |
| |
| for (count = 0; count < 2; count++) { |
| gpio_set_value(WLAN_CLK, 1); |
| gpio_set_value(WLAN_CLK, 0); |
| } |
| |
| rf_bit = 0; |
| for (count = 0; count < 6; count++) { |
| gpio_set_value(WLAN_CLK, 1); |
| gpio_set_value(WLAN_CLK, 0); |
| |
| rf_bit = gpio_get_value(WLAN_DATA0); |
| rf_data_received |= (rf_bit << (count * 3 + 0)); |
| |
| if (count != 5) { |
| rf_bit = gpio_get_value(WLAN_DATA1); |
| rf_data_received |= (rf_bit << (count * 3 + 1)); |
| |
| rf_bit = gpio_get_value(WLAN_DATA2); |
| rf_data_received |= (rf_bit << (count * 3 + 2)); |
| } |
| } |
| |
| gpio_set_value(WLAN_SET, 0); |
| wcnss_switch_to_5wire(); |
| |
| return rf_data_received; |
| } |