| /* |
| * LEDs driver for PCEngines ALIX.2 and ALIX.3 |
| * |
| * Copyright (C) 2008 Constantin Baranov <const@mimas.ru> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/string.h> |
| #include <linux/pci.h> |
| |
| static int force = 0; |
| module_param(force, bool, 0444); |
| MODULE_PARM_DESC(force, "Assume system has ALIX.2/ALIX.3 style LEDs"); |
| |
| #define MSR_LBAR_GPIO 0x5140000C |
| #define CS5535_GPIO_SIZE 256 |
| |
| static u32 gpio_base; |
| |
| static struct pci_device_id divil_pci[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) }, |
| { } /* NULL entry */ |
| }; |
| MODULE_DEVICE_TABLE(pci, divil_pci); |
| |
| struct alix_led { |
| struct led_classdev cdev; |
| unsigned short port; |
| unsigned int on_value; |
| unsigned int off_value; |
| }; |
| |
| static void alix_led_set(struct led_classdev *led_cdev, |
| enum led_brightness brightness) |
| { |
| struct alix_led *led_dev = |
| container_of(led_cdev, struct alix_led, cdev); |
| |
| if (brightness) |
| outl(led_dev->on_value, gpio_base + led_dev->port); |
| else |
| outl(led_dev->off_value, gpio_base + led_dev->port); |
| } |
| |
| static struct alix_led alix_leds[] = { |
| { |
| .cdev = { |
| .name = "alix:1", |
| .brightness_set = alix_led_set, |
| }, |
| .port = 0x00, |
| .on_value = 1 << 22, |
| .off_value = 1 << 6, |
| }, |
| { |
| .cdev = { |
| .name = "alix:2", |
| .brightness_set = alix_led_set, |
| }, |
| .port = 0x80, |
| .on_value = 1 << 25, |
| .off_value = 1 << 9, |
| }, |
| { |
| .cdev = { |
| .name = "alix:3", |
| .brightness_set = alix_led_set, |
| }, |
| .port = 0x80, |
| .on_value = 1 << 27, |
| .off_value = 1 << 11, |
| }, |
| }; |
| |
| static int __init alix_led_probe(struct platform_device *pdev) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < ARRAY_SIZE(alix_leds); i++) { |
| alix_leds[i].cdev.flags |= LED_CORE_SUSPENDRESUME; |
| ret = led_classdev_register(&pdev->dev, &alix_leds[i].cdev); |
| if (ret < 0) |
| goto fail; |
| } |
| return 0; |
| |
| fail: |
| while (--i >= 0) |
| led_classdev_unregister(&alix_leds[i].cdev); |
| return ret; |
| } |
| |
| static int alix_led_remove(struct platform_device *pdev) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(alix_leds); i++) |
| led_classdev_unregister(&alix_leds[i].cdev); |
| return 0; |
| } |
| |
| static struct platform_driver alix_led_driver = { |
| .remove = alix_led_remove, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init alix_present(unsigned long bios_phys, |
| const char *alix_sig, |
| size_t alix_sig_len) |
| { |
| const size_t bios_len = 0x00010000; |
| const char *bios_virt; |
| const char *scan_end; |
| const char *p; |
| char name[64]; |
| |
| if (force) { |
| printk(KERN_NOTICE "%s: forced to skip BIOS test, " |
| "assume system has ALIX.2 style LEDs\n", |
| KBUILD_MODNAME); |
| return 1; |
| } |
| |
| bios_virt = phys_to_virt(bios_phys); |
| scan_end = bios_virt + bios_len - (alix_sig_len + 2); |
| for (p = bios_virt; p < scan_end; p++) { |
| const char *tail; |
| char *a; |
| |
| if (memcmp(p, alix_sig, alix_sig_len) != 0) |
| continue; |
| |
| memcpy(name, p, sizeof(name)); |
| |
| /* remove the first \0 character from string */ |
| a = strchr(name, '\0'); |
| if (a) |
| *a = ' '; |
| |
| /* cut the string at a newline */ |
| a = strchr(name, '\r'); |
| if (a) |
| *a = '\0'; |
| |
| tail = p + alix_sig_len; |
| if ((tail[0] == '2' || tail[0] == '3')) { |
| printk(KERN_INFO |
| "%s: system is recognized as \"%s\"\n", |
| KBUILD_MODNAME, name); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_device *pdev; |
| |
| static int __init alix_pci_led_init(void) |
| { |
| u32 low, hi; |
| |
| if (pci_dev_present(divil_pci) == 0) { |
| printk(KERN_WARNING KBUILD_MODNAME": DIVIL not found\n"); |
| return -ENODEV; |
| } |
| |
| /* Grab the GPIO I/O range */ |
| rdmsr(MSR_LBAR_GPIO, low, hi); |
| |
| /* Check the mask and whether GPIO is enabled (sanity check) */ |
| if (hi != 0x0000f001) { |
| printk(KERN_WARNING KBUILD_MODNAME": GPIO not enabled\n"); |
| return -ENODEV; |
| } |
| |
| /* Mask off the IO base address */ |
| gpio_base = low & 0x0000ff00; |
| |
| if (!request_region(gpio_base, CS5535_GPIO_SIZE, KBUILD_MODNAME)) { |
| printk(KERN_ERR KBUILD_MODNAME": can't allocate I/O for GPIO\n"); |
| return -ENODEV; |
| } |
| |
| /* Set GPIO function to output */ |
| outl(1 << 6, gpio_base + 0x04); |
| outl(1 << 9, gpio_base + 0x84); |
| outl(1 << 11, gpio_base + 0x84); |
| |
| return 0; |
| } |
| |
| static int __init alix_led_init(void) |
| { |
| int ret = -ENODEV; |
| const char tinybios_sig[] = "PC Engines ALIX."; |
| const char coreboot_sig[] = "PC Engines\0ALIX."; |
| |
| if (alix_present(0xf0000, tinybios_sig, sizeof(tinybios_sig) - 1) || |
| alix_present(0x500, coreboot_sig, sizeof(coreboot_sig) - 1)) |
| ret = alix_pci_led_init(); |
| |
| if (ret < 0) |
| return ret; |
| |
| pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); |
| if (!IS_ERR(pdev)) { |
| ret = platform_driver_probe(&alix_led_driver, alix_led_probe); |
| if (ret) |
| platform_device_unregister(pdev); |
| } else |
| ret = PTR_ERR(pdev); |
| |
| return ret; |
| } |
| |
| static void __exit alix_led_exit(void) |
| { |
| platform_device_unregister(pdev); |
| platform_driver_unregister(&alix_led_driver); |
| release_region(gpio_base, CS5535_GPIO_SIZE); |
| } |
| |
| module_init(alix_led_init); |
| module_exit(alix_led_exit); |
| |
| MODULE_AUTHOR("Constantin Baranov <const@mimas.ru>"); |
| MODULE_DESCRIPTION("PCEngines ALIX.2 and ALIX.3 LED driver"); |
| MODULE_LICENSE("GPL"); |