| /* Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/sx150x.h> |
| #include <linux/i2c/isl9519.h> |
| #include <linux/gpio.h> |
| #include <linux/msm_ssbi.h> |
| #include <linux/regulator/gpio-regulator.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <linux/mfd/pm8xxx/pm8xxx-adc.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slimbus/slimbus.h> |
| #include <linux/bootmem.h> |
| #include <linux/msm_kgsl.h> |
| #ifdef CONFIG_ANDROID_PMEM |
| #include <linux/android_pmem.h> |
| #endif |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_data/qcom_crypto_device.h> |
| #include <linux/platform_data/qcom_wcnss_device.h> |
| #include <linux/leds.h> |
| #include <linux/leds-pm8xxx.h> |
| #include <linux/i2c/atmel_mxt_ts.h> |
| #include <linux/msm_tsens.h> |
| #include <linux/ks8851.h> |
| #include <linux/i2c/isa1200.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/memory.h> |
| #include <linux/memblock.h> |
| |
| #include <linux/slimbus/slimbus.h> |
| #include <linux/mfd/wcd9xxx/core.h> |
| #include <linux/mfd/wcd9xxx/pdata.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/setup.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/mach/mmc.h> |
| |
| #include <mach/board.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/msm_spi.h> |
| #ifdef CONFIG_USB_MSM_OTG_72K |
| #include <mach/msm_hsusb.h> |
| #else |
| #include <linux/usb/msm_hsusb.h> |
| #endif |
| #include <linux/usb/android.h> |
| #include <mach/usbdiag.h> |
| #include <mach/socinfo.h> |
| #include <mach/rpm.h> |
| #include <mach/gpio.h> |
| #include <mach/gpiomux.h> |
| #include <mach/msm_bus_board.h> |
| #include <mach/msm_memtypes.h> |
| #include <mach/dma.h> |
| #include <mach/msm_xo.h> |
| #include <mach/restart.h> |
| |
| #include <linux/ion.h> |
| #include <mach/ion.h> |
| #include <mach/mdm2.h> |
| #include <mach/msm_rtb.h> |
| #include <linux/fmem.h> |
| |
| #include "timer.h" |
| #include "devices.h" |
| #include "devices-msm8x60.h" |
| #include "spm.h" |
| #include "pm.h" |
| #include <mach/cpuidle.h> |
| #include "rpm_resources.h" |
| #include <mach/mpm.h> |
| #include "acpuclock.h" |
| #include "smd_private.h" |
| #include "pm-boot.h" |
| #include "msm_watchdog.h" |
| #include "board-8930.h" |
| |
| static struct platform_device msm_fm_platform_init = { |
| .name = "iris_fm", |
| .id = -1, |
| }; |
| |
| #define KS8851_RST_GPIO 89 |
| #define KS8851_IRQ_GPIO 90 |
| #define HAP_SHIFT_LVL_OE_GPIO 47 |
| |
| #if defined(CONFIG_GPIO_SX150X) || defined(CONFIG_GPIO_SX150X_MODULE) |
| |
| struct sx150x_platform_data msm8930_sx150x_data[] = { |
| [SX150X_CAM] = { |
| .gpio_base = GPIO_CAM_EXPANDER_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0, |
| .io_pulldn_ena = 0xc0, |
| .io_open_drain_ena = 0x0, |
| .irq_summary = -1, |
| }, |
| }; |
| |
| #endif |
| |
| #define MSM_PMEM_ADSP_SIZE 0x7800000 |
| #define MSM_PMEM_AUDIO_SIZE 0x4CF000 |
| #ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY |
| #define MSM_PMEM_SIZE 0x4000000 /* 64 Mbytes */ |
| #else |
| #define MSM_PMEM_SIZE 0x2800000 /* 40 Mbytes */ |
| #endif |
| #define MSM_LIQUID_PMEM_SIZE 0x4000000 /* 64 Mbytes */ |
| |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| #define MSM_PMEM_KERNEL_EBI1_SIZE 0x65000 |
| #define MSM_ION_SF_SIZE MSM_PMEM_SIZE |
| #define MSM_ION_MM_SIZE MSM_PMEM_ADSP_SIZE |
| #define MSM_ION_QSECOM_SIZE 0x300000 /* (3MB) */ |
| #define MSM_ION_HEAP_NUM 8 |
| |
| |
| #define MSM_ION_MM_FW_SIZE 0x200000 /* (2MB) */ |
| #define MSM_ION_MFC_SIZE SZ_8K |
| #define MSM_ION_AUDIO_SIZE MSM_PMEM_AUDIO_SIZE |
| |
| #define MSM_LIQUID_ION_MM_SIZE (MSM_ION_MM_SIZE + 0x600000) |
| #define MSM_LIQUID_ION_SF_SIZE MSM_LIQUID_PMEM_SIZE |
| #define MSM_HDMI_PRIM_ION_SF_SIZE MSM_HDMI_PRIM_PMEM_SIZE |
| |
| #define MSM8930_FIXED_AREA_START 0xa0000000 |
| #define MAX_FIXED_AREA_SIZE 0x10000000 |
| #define MSM_MM_FW_SIZE 0x200000 |
| #define MSM8930_FW_START (MSM8930_FIXED_AREA_START - MSM_MM_FW_SIZE) |
| |
| #else |
| #define MSM_PMEM_KERNEL_EBI1_SIZE 0x110C000 |
| #define MSM_ION_HEAP_NUM 1 |
| #endif |
| |
| #ifdef CONFIG_KERNEL_PMEM_EBI_REGION |
| static unsigned pmem_kernel_ebi1_size = MSM_PMEM_KERNEL_EBI1_SIZE; |
| static int __init pmem_kernel_ebi1_size_setup(char *p) |
| { |
| pmem_kernel_ebi1_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_kernel_ebi1_size", pmem_kernel_ebi1_size_setup); |
| #endif |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| static unsigned pmem_size = MSM_PMEM_SIZE; |
| static int __init pmem_size_setup(char *p) |
| { |
| pmem_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_size", pmem_size_setup); |
| |
| static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE; |
| |
| static int __init pmem_adsp_size_setup(char *p) |
| { |
| pmem_adsp_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_adsp_size", pmem_adsp_size_setup); |
| |
| static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE; |
| |
| static int __init pmem_audio_size_setup(char *p) |
| { |
| pmem_audio_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_audio_size", pmem_audio_size_setup); |
| #endif |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static struct android_pmem_platform_data android_pmem_pdata = { |
| .name = "pmem", |
| .allocator_type = PMEM_ALLOCATORTYPE_ALLORNOTHING, |
| .cached = 1, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device msm8930_android_pmem_device = { |
| .name = "android_pmem", |
| .id = 0, |
| .dev = {.platform_data = &android_pmem_pdata}, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_adsp_pdata = { |
| .name = "pmem_adsp", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 0, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| static struct platform_device msm8930_android_pmem_adsp_device = { |
| .name = "android_pmem", |
| .id = 2, |
| .dev = { .platform_data = &android_pmem_adsp_pdata }, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_audio_pdata = { |
| .name = "pmem_audio", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 0, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device msm8930_android_pmem_audio_device = { |
| .name = "android_pmem", |
| .id = 4, |
| .dev = { .platform_data = &android_pmem_audio_pdata }, |
| }; |
| #endif /* CONFIG_MSM_MULTIMEDIA_USE_ION */ |
| #endif /* CONFIG_ANDROID_PMEM */ |
| |
| struct fmem_platform_data msm8930_fmem_pdata = { |
| }; |
| |
| #define DSP_RAM_BASE_8960 0x8da00000 |
| #define DSP_RAM_SIZE_8960 0x1800000 |
| static int dspcrashd_pdata_8960 = 0xDEADDEAD; |
| |
| static struct resource resources_dspcrashd_8960[] = { |
| { |
| .name = "msm_dspcrashd", |
| .start = DSP_RAM_BASE_8960, |
| .end = DSP_RAM_BASE_8960 + DSP_RAM_SIZE_8960, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct platform_device msm_device_dspcrashd_8960 = { |
| .name = "msm_dspcrashd", |
| .num_resources = ARRAY_SIZE(resources_dspcrashd_8960), |
| .resource = resources_dspcrashd_8960, |
| .dev = { .platform_data = &dspcrashd_pdata_8960 }, |
| }; |
| |
| static struct memtype_reserve msm8930_reserve_table[] __initdata = { |
| [MEMTYPE_SMI] = { |
| }, |
| [MEMTYPE_EBI0] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| [MEMTYPE_EBI1] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| }; |
| |
| |
| static void __init reserve_rtb_memory(void) |
| { |
| #if defined(CONFIG_MSM_RTB) |
| msm8930_reserve_table[MEMTYPE_EBI1].size += msm8930_rtb_pdata.size; |
| #endif |
| } |
| |
| static void __init size_pmem_devices(void) |
| { |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| android_pmem_adsp_pdata.size = pmem_adsp_size; |
| android_pmem_pdata.size = pmem_size; |
| android_pmem_audio_pdata.size = MSM_PMEM_AUDIO_SIZE; |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| } |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static void __init reserve_memory_for(struct android_pmem_platform_data *p) |
| { |
| msm8930_reserve_table[p->memory_type].size += p->size; |
| } |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| |
| static void __init reserve_pmem_memory(void) |
| { |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| reserve_memory_for(&android_pmem_adsp_pdata); |
| reserve_memory_for(&android_pmem_pdata); |
| reserve_memory_for(&android_pmem_audio_pdata); |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| msm8930_reserve_table[MEMTYPE_EBI1].size += pmem_kernel_ebi1_size; |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| } |
| |
| static int msm8930_paddr_to_memtype(unsigned int paddr) |
| { |
| return MEMTYPE_EBI1; |
| } |
| |
| #define FMEM_ENABLED 1 |
| #ifdef CONFIG_ION_MSM |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static struct ion_cp_heap_pdata cp_mm_msm8930_ion_pdata = { |
| .permission_type = IPT_TYPE_MM_CARVEOUT, |
| .align = PAGE_SIZE, |
| .reusable = FMEM_ENABLED, |
| .mem_is_fmem = FMEM_ENABLED, |
| .fixed_position = FIXED_MIDDLE, |
| }; |
| |
| static struct ion_cp_heap_pdata cp_mfc_msm8930_ion_pdata = { |
| .permission_type = IPT_TYPE_MFC_SHAREDMEM, |
| .align = PAGE_SIZE, |
| .reusable = 0, |
| .mem_is_fmem = FMEM_ENABLED, |
| .fixed_position = FIXED_HIGH, |
| }; |
| |
| static struct ion_co_heap_pdata co_msm8930_ion_pdata = { |
| .adjacent_mem_id = INVALID_HEAP_ID, |
| .align = PAGE_SIZE, |
| .mem_is_fmem = 0, |
| }; |
| |
| static struct ion_co_heap_pdata fw_co_msm8930_ion_pdata = { |
| .adjacent_mem_id = ION_CP_MM_HEAP_ID, |
| .align = SZ_128K, |
| .mem_is_fmem = FMEM_ENABLED, |
| .fixed_position = FIXED_LOW, |
| }; |
| #endif |
| |
| /** |
| * These heaps are listed in the order they will be allocated. Due to |
| * video hardware restrictions and content protection the FW heap has to |
| * be allocated adjacent (below) the MM heap and the MFC heap has to be |
| * allocated after the MM heap to ensure MFC heap is not more than 256MB |
| * away from the base address of the FW heap. |
| * However, the order of FW heap and MM heap doesn't matter since these |
| * two heaps are taken care of by separate code to ensure they are adjacent |
| * to each other. |
| * Don't swap the order unless you know what you are doing! |
| */ |
| static struct ion_platform_data msm8930_ion_pdata = { |
| .nr = MSM_ION_HEAP_NUM, |
| .heaps = { |
| { |
| .id = ION_SYSTEM_HEAP_ID, |
| .type = ION_HEAP_TYPE_SYSTEM, |
| .name = ION_VMALLOC_HEAP_NAME, |
| }, |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| { |
| .id = ION_CP_MM_HEAP_ID, |
| .type = ION_HEAP_TYPE_CP, |
| .name = ION_MM_HEAP_NAME, |
| .size = MSM_ION_MM_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &cp_mm_msm8930_ion_pdata, |
| }, |
| { |
| .id = ION_MM_FIRMWARE_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_MM_FIRMWARE_HEAP_NAME, |
| .size = MSM_ION_MM_FW_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &fw_co_msm8930_ion_pdata, |
| }, |
| { |
| .id = ION_CP_MFC_HEAP_ID, |
| .type = ION_HEAP_TYPE_CP, |
| .name = ION_MFC_HEAP_NAME, |
| .size = MSM_ION_MFC_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &cp_mfc_msm8930_ion_pdata, |
| }, |
| { |
| .id = ION_SF_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_SF_HEAP_NAME, |
| .size = MSM_ION_SF_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_msm8930_ion_pdata, |
| }, |
| { |
| .id = ION_IOMMU_HEAP_ID, |
| .type = ION_HEAP_TYPE_IOMMU, |
| .name = ION_IOMMU_HEAP_NAME, |
| }, |
| { |
| .id = ION_QSECOM_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_QSECOM_HEAP_NAME, |
| .size = MSM_ION_QSECOM_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_msm8930_ion_pdata, |
| }, |
| { |
| .id = ION_AUDIO_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_AUDIO_HEAP_NAME, |
| .size = MSM_ION_AUDIO_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_msm8930_ion_pdata, |
| }, |
| #endif |
| } |
| }; |
| |
| static struct platform_device msm8930_ion_dev = { |
| .name = "ion-msm", |
| .id = 1, |
| .dev = { .platform_data = &msm8930_ion_pdata }, |
| }; |
| #endif |
| |
| struct platform_device msm8930_fmem_device = { |
| .name = "fmem", |
| .id = 1, |
| .dev = { .platform_data = &msm8930_fmem_pdata }, |
| }; |
| |
| static void __init reserve_mem_for_ion(enum ion_memory_types mem_type, |
| unsigned long size) |
| { |
| msm8930_reserve_table[mem_type].size += size; |
| } |
| |
| static void __init msm8930_reserve_fixed_area(unsigned long fixed_area_size) |
| { |
| #if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION) |
| int ret; |
| |
| if (fixed_area_size > MAX_FIXED_AREA_SIZE) |
| panic("fixed area size is larger than %dM\n", |
| MAX_FIXED_AREA_SIZE >> 20); |
| |
| reserve_info->fixed_area_size = fixed_area_size; |
| reserve_info->fixed_area_start = MSM8930_FW_START; |
| |
| ret = memblock_remove(reserve_info->fixed_area_start, |
| reserve_info->fixed_area_size); |
| BUG_ON(ret); |
| #endif |
| } |
| |
| /** |
| * Reserve memory for ION and calculate amount of reusable memory for fmem. |
| * We only reserve memory for heaps that are not reusable. However, we only |
| * support one reusable heap at the moment so we ignore the reusable flag for |
| * other than the first heap with reusable flag set. Also handle special case |
| * for video heaps (MM,FW, and MFC). Video requires heaps MM and MFC to be |
| * at a higher address than FW in addition to not more than 256MB away from the |
| * base address of the firmware. This means that if MM is reusable the other |
| * two heaps must be allocated in the same region as FW. This is handled by the |
| * mem_is_fmem flag in the platform data. In addition the MM heap must be |
| * adjacent to the FW heap for content protection purposes. |
| */ |
| static void __init reserve_ion_memory(void) |
| { |
| #if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION) |
| unsigned int i; |
| unsigned int reusable_count = 0; |
| unsigned int fixed_size = 0; |
| unsigned int fixed_low_size, fixed_middle_size, fixed_high_size; |
| unsigned long fixed_low_start, fixed_middle_start, fixed_high_start; |
| |
| msm8930_fmem_pdata.size = 0; |
| msm8930_fmem_pdata.reserved_size_low = 0; |
| msm8930_fmem_pdata.reserved_size_high = 0; |
| fixed_low_size = 0; |
| fixed_middle_size = 0; |
| fixed_high_size = 0; |
| |
| /* We only support 1 reusable heap. Check if more than one heap |
| * is specified as reusable and set as non-reusable if found. |
| */ |
| for (i = 0; i < msm8930_ion_pdata.nr; ++i) { |
| const struct ion_platform_heap *heap = |
| &(msm8930_ion_pdata.heaps[i]); |
| |
| if (heap->type == ION_HEAP_TYPE_CP && heap->extra_data) { |
| struct ion_cp_heap_pdata *data = heap->extra_data; |
| |
| reusable_count += (data->reusable) ? 1 : 0; |
| |
| if (data->reusable && reusable_count > 1) { |
| pr_err("%s: Too many heaps specified as " |
| "reusable. Heap %s was not configured " |
| "as reusable.\n", __func__, heap->name); |
| data->reusable = 0; |
| } |
| } |
| } |
| |
| for (i = 0; i < msm8930_ion_pdata.nr; ++i) { |
| const struct ion_platform_heap *heap = |
| &(msm8930_ion_pdata.heaps[i]); |
| |
| if (heap->extra_data) { |
| int fixed_position = NOT_FIXED; |
| int mem_is_fmem = 0; |
| |
| switch (heap->type) { |
| case ION_HEAP_TYPE_CP: |
| mem_is_fmem = ((struct ion_cp_heap_pdata *) |
| heap->extra_data)->mem_is_fmem; |
| fixed_position = ((struct ion_cp_heap_pdata *) |
| heap->extra_data)->fixed_position; |
| break; |
| case ION_HEAP_TYPE_CARVEOUT: |
| mem_is_fmem = ((struct ion_co_heap_pdata *) |
| heap->extra_data)->mem_is_fmem; |
| fixed_position = ((struct ion_co_heap_pdata *) |
| heap->extra_data)->fixed_position; |
| break; |
| default: |
| break; |
| } |
| |
| if (fixed_position != NOT_FIXED) |
| fixed_size += heap->size; |
| else |
| reserve_mem_for_ion(MEMTYPE_EBI1, heap->size); |
| |
| if (fixed_position == FIXED_LOW) |
| fixed_low_size += heap->size; |
| else if (fixed_position == FIXED_MIDDLE) |
| fixed_middle_size += heap->size; |
| else if (fixed_position == FIXED_HIGH) |
| fixed_high_size += heap->size; |
| |
| if (mem_is_fmem) |
| msm8930_fmem_pdata.size += heap->size; |
| } |
| } |
| |
| if (!fixed_size) |
| return; |
| |
| if (msm8930_fmem_pdata.size) { |
| msm8930_fmem_pdata.reserved_size_low = fixed_low_size; |
| msm8930_fmem_pdata.reserved_size_high = fixed_high_size; |
| } |
| |
| /* Since the fixed area may be carved out of lowmem, |
| * make sure the length is a multiple of 1M. |
| */ |
| fixed_size = (fixed_size + MSM_MM_FW_SIZE + SECTION_SIZE - 1) |
| & SECTION_MASK; |
| msm8930_reserve_fixed_area(fixed_size); |
| |
| fixed_low_start = MSM8930_FIXED_AREA_START; |
| fixed_middle_start = fixed_low_start + fixed_low_size; |
| fixed_high_start = fixed_middle_start + fixed_middle_size; |
| |
| for (i = 0; i < msm8930_ion_pdata.nr; ++i) { |
| struct ion_platform_heap *heap = &(msm8930_ion_pdata.heaps[i]); |
| |
| if (heap->extra_data) { |
| int fixed_position = NOT_FIXED; |
| |
| switch (heap->type) { |
| case ION_HEAP_TYPE_CP: |
| fixed_position = ((struct ion_cp_heap_pdata *) |
| heap->extra_data)->fixed_position; |
| break; |
| case ION_HEAP_TYPE_CARVEOUT: |
| fixed_position = ((struct ion_co_heap_pdata *) |
| heap->extra_data)->fixed_position; |
| break; |
| default: |
| break; |
| } |
| |
| switch (fixed_position) { |
| case FIXED_LOW: |
| heap->base = fixed_low_start; |
| break; |
| case FIXED_MIDDLE: |
| heap->base = fixed_middle_start; |
| break; |
| case FIXED_HIGH: |
| heap->base = fixed_high_start; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| #endif |
| } |
| |
| static void __init reserve_mdp_memory(void) |
| { |
| msm8930_mdp_writeback(msm8930_reserve_table); |
| } |
| |
| static void __init msm8930_calculate_reserve_sizes(void) |
| { |
| size_pmem_devices(); |
| reserve_pmem_memory(); |
| reserve_ion_memory(); |
| reserve_mdp_memory(); |
| reserve_rtb_memory(); |
| } |
| |
| static struct reserve_info msm8930_reserve_info __initdata = { |
| .memtype_reserve_table = msm8930_reserve_table, |
| .calculate_reserve_sizes = msm8930_calculate_reserve_sizes, |
| .reserve_fixed_area = msm8930_reserve_fixed_area, |
| .paddr_to_memtype = msm8930_paddr_to_memtype, |
| }; |
| |
| static int msm8930_memory_bank_size(void) |
| { |
| return 1<<29; |
| } |
| |
| static void __init locate_unstable_memory(void) |
| { |
| struct membank *mb = &meminfo.bank[meminfo.nr_banks - 1]; |
| unsigned long bank_size; |
| unsigned long low, high; |
| |
| bank_size = msm8930_memory_bank_size(); |
| low = meminfo.bank[0].start; |
| high = mb->start + mb->size; |
| |
| /* Check if 32 bit overflow occured */ |
| if (high < mb->start) |
| high -= PAGE_SIZE; |
| |
| if (high < MAX_FIXED_AREA_SIZE + MSM8930_FIXED_AREA_START) |
| panic("fixed area extends beyond end of memory\n"); |
| |
| low &= ~(bank_size - 1); |
| |
| if (high - low <= bank_size) |
| goto no_dmm; |
| |
| msm8930_reserve_info.bank_size = bank_size; |
| #ifdef CONFIG_ENABLE_DMM |
| msm8930_reserve_info.low_unstable_address = mb->start - |
| MIN_MEMORY_BLOCK_SIZE + mb->size; |
| msm8930_reserve_info.max_unstable_size = MIN_MEMORY_BLOCK_SIZE; |
| pr_info("low unstable address %lx max size %lx bank size %lx\n", |
| msm8930_reserve_info.low_unstable_address, |
| msm8930_reserve_info.max_unstable_size, |
| msm8930_reserve_info.bank_size); |
| return; |
| #endif |
| no_dmm: |
| msm8930_reserve_info.low_unstable_address = high; |
| msm8930_reserve_info.max_unstable_size = 0; |
| } |
| |
| static void __init place_movable_zone(void) |
| { |
| #ifdef CONFIG_ENABLE_DMM |
| movable_reserved_start = msm8930_reserve_info.low_unstable_address; |
| movable_reserved_size = msm8930_reserve_info.max_unstable_size; |
| pr_info("movable zone start %lx size %lx\n", |
| movable_reserved_start, movable_reserved_size); |
| #endif |
| } |
| |
| static void __init msm8930_early_memory(void) |
| { |
| reserve_info = &msm8930_reserve_info; |
| locate_unstable_memory(); |
| place_movable_zone(); |
| } |
| |
| static void __init msm8930_reserve(void) |
| { |
| msm_reserve(); |
| if (msm8930_fmem_pdata.size) { |
| #if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION) |
| if (reserve_info->fixed_area_size) { |
| msm8930_fmem_pdata.phys = |
| reserve_info->fixed_area_start + MSM_MM_FW_SIZE; |
| pr_info("mm fw at %lx (fixed) size %x\n", |
| reserve_info->fixed_area_start, MSM_MM_FW_SIZE); |
| pr_info("fmem start %lx (fixed) size %lx\n", |
| msm8930_fmem_pdata.phys, msm8930_fmem_pdata.size); |
| } |
| #endif |
| } |
| } |
| |
| static int msm8930_change_memory_power(u64 start, u64 size, |
| int change_type) |
| { |
| return soc_change_memory_power(start, size, change_type); |
| } |
| |
| static void __init msm8930_allocate_memory_regions(void) |
| { |
| msm8930_allocate_fb_region(); |
| } |
| |
| #ifdef CONFIG_WCD9304_CODEC |
| |
| #define SITAR_INTERRUPT_BASE (NR_MSM_IRQS + NR_GPIO_IRQS + NR_PM8921_IRQS) |
| |
| /* Micbias setting is based on 8660 CDP/MTP/FLUID requirement |
| * 4 micbiases are used to power various analog and digital |
| * microphones operating at 1800 mV. Technically, all micbiases |
| * can source from single cfilter since all microphones operate |
| * at the same voltage level. The arrangement below is to make |
| * sure all cfilters are exercised. LDO_H regulator ouput level |
| * does not need to be as high as 2.85V. It is choosen for |
| * microphone sensitivity purpose. |
| */ |
| static struct wcd9xxx_pdata sitar_platform_data = { |
| .slimbus_slave_device = { |
| .name = "sitar-slave", |
| .e_addr = {0, 0, 0x00, 0, 0x17, 2}, |
| }, |
| .irq = MSM_GPIO_TO_INT(62), |
| .irq_base = SITAR_INTERRUPT_BASE, |
| .num_irqs = NR_WCD9XXX_IRQS, |
| .reset_gpio = 42, |
| .micbias = { |
| .ldoh_v = SITAR_LDOH_2P85_V, |
| .cfilt1_mv = 1800, |
| .cfilt2_mv = 1800, |
| .bias1_cfilt_sel = SITAR_CFILT1_SEL, |
| .bias2_cfilt_sel = SITAR_CFILT2_SEL, |
| }, |
| .regulator = { |
| { |
| .name = "CDC_VDD_CP", |
| .min_uV = 1950000, |
| .max_uV = 2200000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_RX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_TX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX, |
| }, |
| { |
| .name = "VDDIO_CDC", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX, |
| }, |
| { |
| .name = "VDDD_CDC_D", |
| .min_uV = 1200000, |
| .max_uV = 1200000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_A_1P2V", |
| .min_uV = 1200000, |
| .max_uV = 1200000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX, |
| }, |
| }, |
| }; |
| |
| static struct slim_device msm_slim_sitar = { |
| .name = "sitar-slim", |
| .e_addr = {0, 1, 0x00, 0, 0x17, 2}, |
| .dev = { |
| .platform_data = &sitar_platform_data, |
| }, |
| }; |
| #endif |
| |
| |
| static struct slim_boardinfo msm_slim_devices[] = { |
| #ifdef CONFIG_WCD9304_CODEC |
| { |
| .bus_num = 1, |
| .slim_slave = &msm_slim_sitar, |
| }, |
| #endif |
| /* add more slimbus slaves as needed */ |
| }; |
| |
| #define MSM_WCNSS_PHYS 0x03000000 |
| #define MSM_WCNSS_SIZE 0x280000 |
| |
| static struct resource resources_wcnss_wlan[] = { |
| { |
| .start = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ, |
| .end = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ, |
| .name = "wcnss_wlanrx_irq", |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ, |
| .end = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ, |
| .name = "wcnss_wlantx_irq", |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = MSM_WCNSS_PHYS, |
| .end = MSM_WCNSS_PHYS + MSM_WCNSS_SIZE - 1, |
| .name = "wcnss_mmio", |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = 84, |
| .end = 88, |
| .name = "wcnss_gpios_5wire", |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct qcom_wcnss_opts qcom_wcnss_pdata = { |
| .has_48mhz_xo = 1, |
| }; |
| |
| static struct platform_device msm_device_wcnss_wlan = { |
| .name = "wcnss_wlan", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(resources_wcnss_wlan), |
| .resource = resources_wcnss_wlan, |
| .dev = {.platform_data = &qcom_wcnss_pdata}, |
| }; |
| |
| #ifdef CONFIG_QSEECOM |
| /* qseecom bus scaling */ |
| static struct msm_bus_vectors qseecom_clks_init_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ib = 0, |
| .ab = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPDM, |
| .dst = MSM_BUS_SLAVE_SPDM, |
| .ib = 0, |
| .ab = 0, |
| }, |
| }; |
| |
| static struct msm_bus_vectors qseecom_enable_dfab_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ib = (492 * 8) * 1000000UL, |
| .ab = (492 * 8) * 100000UL, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPDM, |
| .dst = MSM_BUS_SLAVE_SPDM, |
| .ib = 0, |
| .ab = 0, |
| }, |
| }; |
| |
| static struct msm_bus_vectors qseecom_enable_sfpb_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ib = 0, |
| .ab = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPDM, |
| .dst = MSM_BUS_SLAVE_SPDM, |
| .ib = (64 * 8) * 1000000UL, |
| .ab = (64 * 8) * 100000UL, |
| }, |
| }; |
| |
| static struct msm_bus_paths qseecom_hw_bus_scale_usecases[] = { |
| { |
| ARRAY_SIZE(qseecom_clks_init_vectors), |
| qseecom_clks_init_vectors, |
| }, |
| { |
| ARRAY_SIZE(qseecom_enable_dfab_vectors), |
| qseecom_enable_sfpb_vectors, |
| }, |
| { |
| ARRAY_SIZE(qseecom_enable_sfpb_vectors), |
| qseecom_enable_sfpb_vectors, |
| }, |
| }; |
| |
| static struct msm_bus_scale_pdata qseecom_bus_pdata = { |
| qseecom_hw_bus_scale_usecases, |
| ARRAY_SIZE(qseecom_hw_bus_scale_usecases), |
| .name = "qsee", |
| }; |
| |
| static struct platform_device qseecom_device = { |
| .name = "qseecom", |
| .id = 0, |
| .dev = { |
| .platform_data = &qseecom_bus_pdata, |
| }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| |
| #define QCE_SIZE 0x10000 |
| #define QCE_0_BASE 0x18500000 |
| |
| #define QCE_HW_KEY_SUPPORT 0 |
| #define QCE_SHA_HMAC_SUPPORT 1 |
| #define QCE_SHARE_CE_RESOURCE 1 |
| #define QCE_CE_SHARED 0 |
| |
| static struct resource qcrypto_resources[] = { |
| [0] = { |
| .start = QCE_0_BASE, |
| .end = QCE_0_BASE + QCE_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "crypto_channels", |
| .start = DMOV_CE_IN_CHAN, |
| .end = DMOV_CE_OUT_CHAN, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .name = "crypto_crci_in", |
| .start = DMOV_CE_IN_CRCI, |
| .end = DMOV_CE_IN_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .name = "crypto_crci_out", |
| .start = DMOV_CE_OUT_CRCI, |
| .end = DMOV_CE_OUT_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct resource qcedev_resources[] = { |
| [0] = { |
| .start = QCE_0_BASE, |
| .end = QCE_0_BASE + QCE_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "crypto_channels", |
| .start = DMOV_CE_IN_CHAN, |
| .end = DMOV_CE_OUT_CHAN, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .name = "crypto_crci_in", |
| .start = DMOV_CE_IN_CRCI, |
| .end = DMOV_CE_IN_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .name = "crypto_crci_out", |
| .start = DMOV_CE_OUT_CRCI, |
| .end = DMOV_CE_OUT_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) |
| |
| static struct msm_ce_hw_support qcrypto_ce_hw_suppport = { |
| .ce_shared = QCE_CE_SHARED, |
| .shared_ce_resource = QCE_SHARE_CE_RESOURCE, |
| .hw_key_support = QCE_HW_KEY_SUPPORT, |
| .sha_hmac = QCE_SHA_HMAC_SUPPORT, |
| }; |
| |
| static struct platform_device qcrypto_device = { |
| .name = "qcrypto", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(qcrypto_resources), |
| .resource = qcrypto_resources, |
| .dev = { |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &qcrypto_ce_hw_suppport, |
| }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| |
| static struct msm_ce_hw_support qcedev_ce_hw_suppport = { |
| .ce_shared = QCE_CE_SHARED, |
| .shared_ce_resource = QCE_SHARE_CE_RESOURCE, |
| .hw_key_support = QCE_HW_KEY_SUPPORT, |
| .sha_hmac = QCE_SHA_HMAC_SUPPORT, |
| }; |
| |
| static struct platform_device qcedev_device = { |
| .name = "qce", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(qcedev_resources), |
| .resource = qcedev_resources, |
| .dev = { |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &qcedev_ce_hw_suppport, |
| }, |
| }; |
| #endif |
| |
| #define MDM2AP_ERRFATAL 70 |
| #define AP2MDM_ERRFATAL 95 |
| #define MDM2AP_STATUS 69 |
| #define AP2MDM_STATUS 94 |
| #define AP2MDM_PMIC_RESET_N 80 |
| #define AP2MDM_KPDPWR_N 81 |
| |
| static struct resource mdm_resources[] = { |
| { |
| .start = MDM2AP_ERRFATAL, |
| .end = MDM2AP_ERRFATAL, |
| .name = "MDM2AP_ERRFATAL", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_ERRFATAL, |
| .end = AP2MDM_ERRFATAL, |
| .name = "AP2MDM_ERRFATAL", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = MDM2AP_STATUS, |
| .end = MDM2AP_STATUS, |
| .name = "MDM2AP_STATUS", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_STATUS, |
| .end = AP2MDM_STATUS, |
| .name = "AP2MDM_STATUS", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_PMIC_RESET_N, |
| .end = AP2MDM_PMIC_RESET_N, |
| .name = "AP2MDM_PMIC_RESET_N", |
| .flags = IORESOURCE_IO, |
| }, |
| { |
| .start = AP2MDM_KPDPWR_N, |
| .end = AP2MDM_KPDPWR_N, |
| .name = "AP2MDM_KPDPWR_N", |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct mdm_platform_data mdm_platform_data = { |
| .mdm_version = "2.5", |
| }; |
| |
| static struct platform_device mdm_device = { |
| .name = "mdm2_modem", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(mdm_resources), |
| .resource = mdm_resources, |
| .dev = { |
| .platform_data = &mdm_platform_data, |
| }, |
| }; |
| |
| static struct platform_device *mdm_devices[] __initdata = { |
| &mdm_device, |
| }; |
| |
| #ifdef CONFIG_MSM_MPM |
| static uint16_t msm_mpm_irqs_m2a[MSM_MPM_NR_MPM_IRQS] __initdata = { |
| [1] = MSM_GPIO_TO_INT(46), |
| [2] = MSM_GPIO_TO_INT(150), |
| [4] = MSM_GPIO_TO_INT(103), |
| [5] = MSM_GPIO_TO_INT(104), |
| [6] = MSM_GPIO_TO_INT(105), |
| [7] = MSM_GPIO_TO_INT(106), |
| [8] = MSM_GPIO_TO_INT(107), |
| [9] = MSM_GPIO_TO_INT(7), |
| [10] = MSM_GPIO_TO_INT(11), |
| [11] = MSM_GPIO_TO_INT(15), |
| [12] = MSM_GPIO_TO_INT(19), |
| [13] = MSM_GPIO_TO_INT(23), |
| [14] = MSM_GPIO_TO_INT(27), |
| [15] = MSM_GPIO_TO_INT(31), |
| [16] = MSM_GPIO_TO_INT(35), |
| [19] = MSM_GPIO_TO_INT(90), |
| [20] = MSM_GPIO_TO_INT(92), |
| [23] = MSM_GPIO_TO_INT(85), |
| [24] = MSM_GPIO_TO_INT(83), |
| [25] = USB1_HS_IRQ, |
| [27] = HDMI_IRQ, |
| [29] = MSM_GPIO_TO_INT(10), |
| [30] = MSM_GPIO_TO_INT(102), |
| [31] = MSM_GPIO_TO_INT(81), |
| [32] = MSM_GPIO_TO_INT(78), |
| [33] = MSM_GPIO_TO_INT(94), |
| [34] = MSM_GPIO_TO_INT(72), |
| [35] = MSM_GPIO_TO_INT(39), |
| [36] = MSM_GPIO_TO_INT(43), |
| [37] = MSM_GPIO_TO_INT(61), |
| [38] = MSM_GPIO_TO_INT(50), |
| [39] = MSM_GPIO_TO_INT(42), |
| [41] = MSM_GPIO_TO_INT(62), |
| [42] = MSM_GPIO_TO_INT(76), |
| [43] = MSM_GPIO_TO_INT(75), |
| [44] = MSM_GPIO_TO_INT(70), |
| [45] = MSM_GPIO_TO_INT(69), |
| [46] = MSM_GPIO_TO_INT(67), |
| [47] = MSM_GPIO_TO_INT(65), |
| [48] = MSM_GPIO_TO_INT(58), |
| [49] = MSM_GPIO_TO_INT(54), |
| [50] = MSM_GPIO_TO_INT(52), |
| [51] = MSM_GPIO_TO_INT(49), |
| [52] = MSM_GPIO_TO_INT(40), |
| [53] = MSM_GPIO_TO_INT(37), |
| [54] = MSM_GPIO_TO_INT(24), |
| [55] = MSM_GPIO_TO_INT(14), |
| }; |
| |
| static uint16_t msm_mpm_bypassed_apps_irqs[] __initdata = { |
| TLMM_MSM_SUMMARY_IRQ, |
| RPM_APCC_CPU0_GP_HIGH_IRQ, |
| RPM_APCC_CPU0_GP_MEDIUM_IRQ, |
| RPM_APCC_CPU0_GP_LOW_IRQ, |
| RPM_APCC_CPU0_WAKE_UP_IRQ, |
| RPM_APCC_CPU1_GP_HIGH_IRQ, |
| RPM_APCC_CPU1_GP_MEDIUM_IRQ, |
| RPM_APCC_CPU1_GP_LOW_IRQ, |
| RPM_APCC_CPU1_WAKE_UP_IRQ, |
| MSS_TO_APPS_IRQ_0, |
| MSS_TO_APPS_IRQ_1, |
| MSS_TO_APPS_IRQ_2, |
| MSS_TO_APPS_IRQ_3, |
| MSS_TO_APPS_IRQ_4, |
| MSS_TO_APPS_IRQ_5, |
| MSS_TO_APPS_IRQ_6, |
| MSS_TO_APPS_IRQ_7, |
| MSS_TO_APPS_IRQ_8, |
| MSS_TO_APPS_IRQ_9, |
| LPASS_SCSS_GP_LOW_IRQ, |
| LPASS_SCSS_GP_MEDIUM_IRQ, |
| LPASS_SCSS_GP_HIGH_IRQ, |
| SPS_MTI_30, |
| SPS_MTI_31, |
| RIVA_APSS_SPARE_IRQ, |
| RIVA_APPS_WLAN_SMSM_IRQ, |
| RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ, |
| RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ, |
| }; |
| |
| struct msm_mpm_device_data msm8930_mpm_dev_data __initdata = { |
| .irqs_m2a = msm_mpm_irqs_m2a, |
| .irqs_m2a_size = ARRAY_SIZE(msm_mpm_irqs_m2a), |
| .bypassed_apps_irqs = msm_mpm_bypassed_apps_irqs, |
| .bypassed_apps_irqs_size = ARRAY_SIZE(msm_mpm_bypassed_apps_irqs), |
| .mpm_request_reg_base = MSM_RPM_BASE + 0x9d8, |
| .mpm_status_reg_base = MSM_RPM_BASE + 0xdf8, |
| .mpm_apps_ipc_reg = MSM_APCS_GCC_BASE + 0x008, |
| .mpm_apps_ipc_val = BIT(1), |
| .mpm_ipc_irq = RPM_APCC_CPU0_GP_MEDIUM_IRQ, |
| |
| }; |
| #endif |
| |
| #define MSM_SHARED_RAM_PHYS 0x80000000 |
| |
| static void __init msm8930_map_io(void) |
| { |
| msm_shared_ram_phys = MSM_SHARED_RAM_PHYS; |
| msm_map_msm8930_io(); |
| |
| if (socinfo_init() < 0) |
| pr_err("socinfo_init() failed!\n"); |
| } |
| |
| static void __init msm8930_init_irq(void) |
| { |
| struct msm_mpm_device_data *data = NULL; |
| #ifdef CONFIG_MSM_MPM |
| data = &msm8930_mpm_dev_data; |
| #endif |
| |
| msm_mpm_irq_extn_init(data); |
| gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, |
| (void *)MSM_QGIC_CPU_BASE); |
| } |
| |
| static void __init msm8930_init_buses(void) |
| { |
| #ifdef CONFIG_MSM_BUS_SCALING |
| msm_bus_rpm_set_mt_mask(); |
| msm_bus_8930_apps_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8930_sys_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8930_mm_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8930_apps_fabric.dev.platform_data = |
| &msm_bus_8930_apps_fabric_pdata; |
| msm_bus_8930_sys_fabric.dev.platform_data = |
| &msm_bus_8930_sys_fabric_pdata; |
| msm_bus_8930_mm_fabric.dev.platform_data = |
| &msm_bus_8930_mm_fabric_pdata; |
| msm_bus_8930_sys_fpb.dev.platform_data = &msm_bus_8930_sys_fpb_pdata; |
| msm_bus_8930_cpss_fpb.dev.platform_data = &msm_bus_8930_cpss_fpb_pdata; |
| #endif |
| } |
| |
| static struct msm_spi_platform_data msm8960_qup_spi_gsbi1_pdata = { |
| .max_clock_speed = 15060000, |
| }; |
| |
| #ifdef CONFIG_USB_MSM_OTG_72K |
| static struct msm_otg_platform_data msm_otg_pdata; |
| #else |
| #ifdef CONFIG_MSM_BUS_SCALING |
| /* Bandwidth requests (zero) if no vote placed */ |
| static struct msm_bus_vectors usb_init_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 0, |
| .ib = 0, |
| }, |
| }; |
| |
| /* Bus bandwidth requests in Bytes/sec */ |
| static struct msm_bus_vectors usb_max_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 60000000, /* At least 480Mbps on bus. */ |
| .ib = 960000000, /* MAX bursts rate */ |
| }, |
| }; |
| |
| static struct msm_bus_paths usb_bus_scale_usecases[] = { |
| { |
| ARRAY_SIZE(usb_init_vectors), |
| usb_init_vectors, |
| }, |
| { |
| ARRAY_SIZE(usb_max_vectors), |
| usb_max_vectors, |
| }, |
| }; |
| |
| static struct msm_bus_scale_pdata usb_bus_scale_pdata = { |
| usb_bus_scale_usecases, |
| ARRAY_SIZE(usb_bus_scale_usecases), |
| .name = "usb", |
| }; |
| #endif |
| |
| static struct msm_otg_platform_data msm_otg_pdata = { |
| .mode = USB_OTG, |
| .otg_control = OTG_PMIC_CONTROL, |
| .phy_type = SNPS_28NM_INTEGRATED_PHY, |
| .pmic_id_irq = PM8038_USB_ID_IN_IRQ(PM8038_IRQ_BASE), |
| .power_budget = 750, |
| #ifdef CONFIG_MSM_BUS_SCALING |
| .bus_scale_table = &usb_bus_scale_pdata, |
| #endif |
| }; |
| #endif |
| |
| #define PID_MAGIC_ID 0x71432909 |
| #define SERIAL_NUM_MAGIC_ID 0x61945374 |
| #define SERIAL_NUMBER_LENGTH 127 |
| #define DLOAD_USB_BASE_ADD 0x2A03F0C8 |
| |
| struct magic_num_struct { |
| uint32_t pid; |
| uint32_t serial_num; |
| }; |
| |
| struct dload_struct { |
| uint32_t reserved1; |
| uint32_t reserved2; |
| uint32_t reserved3; |
| uint16_t reserved4; |
| uint16_t pid; |
| char serial_number[SERIAL_NUMBER_LENGTH]; |
| uint16_t reserved5; |
| struct magic_num_struct magic_struct; |
| }; |
| |
| static int usb_diag_update_pid_and_serial_num(uint32_t pid, const char *snum) |
| { |
| struct dload_struct __iomem *dload = 0; |
| |
| dload = ioremap(DLOAD_USB_BASE_ADD, sizeof(*dload)); |
| if (!dload) { |
| pr_err("%s: cannot remap I/O memory region: %08x\n", |
| __func__, DLOAD_USB_BASE_ADD); |
| return -ENXIO; |
| } |
| |
| pr_debug("%s: dload:%p pid:%x serial_num:%s\n", |
| __func__, dload, pid, snum); |
| /* update pid */ |
| dload->magic_struct.pid = PID_MAGIC_ID; |
| dload->pid = pid; |
| |
| /* update serial number */ |
| dload->magic_struct.serial_num = 0; |
| if (!snum) { |
| memset(dload->serial_number, 0, SERIAL_NUMBER_LENGTH); |
| goto out; |
| } |
| |
| dload->magic_struct.serial_num = SERIAL_NUM_MAGIC_ID; |
| strlcpy(dload->serial_number, snum, SERIAL_NUMBER_LENGTH); |
| out: |
| iounmap(dload); |
| return 0; |
| } |
| |
| static struct android_usb_platform_data android_usb_pdata = { |
| .update_pid_and_serial_num = usb_diag_update_pid_and_serial_num, |
| }; |
| |
| static struct platform_device android_usb_device = { |
| .name = "android_usb", |
| .id = -1, |
| .dev = { |
| .platform_data = &android_usb_pdata, |
| }, |
| }; |
| |
| static uint8_t spm_wfi_cmd_sequence[] __initdata = { |
| 0x03, 0x0f, |
| }; |
| |
| static uint8_t spm_power_collapse_without_rpm[] __initdata = { |
| 0x00, 0x24, 0x54, 0x10, |
| 0x09, 0x03, 0x01, |
| 0x10, 0x54, 0x30, 0x0C, |
| 0x24, 0x30, 0x0f, |
| }; |
| |
| static uint8_t spm_power_collapse_with_rpm[] __initdata = { |
| 0x00, 0x24, 0x54, 0x10, |
| 0x09, 0x07, 0x01, 0x0B, |
| 0x10, 0x54, 0x30, 0x0C, |
| 0x24, 0x30, 0x0f, |
| }; |
| |
| static struct msm_spm_seq_entry msm_spm_seq_list[] __initdata = { |
| [0] = { |
| .mode = MSM_SPM_MODE_CLOCK_GATING, |
| .notify_rpm = false, |
| .cmd = spm_wfi_cmd_sequence, |
| }, |
| [1] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = false, |
| .cmd = spm_power_collapse_without_rpm, |
| }, |
| [2] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = true, |
| .cmd = spm_power_collapse_with_rpm, |
| }, |
| }; |
| |
| static struct msm_spm_platform_data msm_spm_data[] __initdata = { |
| [0] = { |
| .reg_base_addr = MSM_SAW0_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_seq_list), |
| .modes = msm_spm_seq_list, |
| }, |
| [1] = { |
| .reg_base_addr = MSM_SAW1_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_seq_list), |
| .modes = msm_spm_seq_list, |
| }, |
| }; |
| |
| static uint8_t l2_spm_wfi_cmd_sequence[] __initdata = { |
| 0x00, 0x20, 0x03, 0x20, |
| 0x00, 0x0f, |
| }; |
| |
| static uint8_t l2_spm_gdhs_cmd_sequence[] __initdata = { |
| 0x00, 0x20, 0x34, 0x64, |
| 0x48, 0x07, 0x48, 0x20, |
| 0x50, 0x64, 0x04, 0x34, |
| 0x50, 0x0f, |
| }; |
| static uint8_t l2_spm_power_off_cmd_sequence[] __initdata = { |
| 0x00, 0x10, 0x34, 0x64, |
| 0x48, 0x07, 0x48, 0x10, |
| 0x50, 0x64, 0x04, 0x34, |
| 0x50, 0x0F, |
| }; |
| |
| static struct msm_spm_seq_entry msm_spm_l2_seq_list[] __initdata = { |
| [0] = { |
| .mode = MSM_SPM_L2_MODE_RETENTION, |
| .notify_rpm = false, |
| .cmd = l2_spm_wfi_cmd_sequence, |
| }, |
| [1] = { |
| .mode = MSM_SPM_L2_MODE_GDHS, |
| .notify_rpm = true, |
| .cmd = l2_spm_gdhs_cmd_sequence, |
| }, |
| [2] = { |
| .mode = MSM_SPM_L2_MODE_POWER_COLLAPSE, |
| .notify_rpm = true, |
| .cmd = l2_spm_power_off_cmd_sequence, |
| }, |
| }; |
| |
| static struct msm_spm_platform_data msm_spm_l2_data[] __initdata = { |
| [0] = { |
| .reg_base_addr = MSM_SAW_L2_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x00A000AE, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A00020, |
| .modes = msm_spm_l2_seq_list, |
| .num_modes = ARRAY_SIZE(msm_spm_l2_seq_list), |
| }, |
| }; |
| |
| #define ISA1200_HAP_EN_GPIO 77 |
| #define ISA1200_HAP_LEN_GPIO 78 |
| #define ISA1200_HAP_CLK PM8038_GPIO_PM_TO_SYS(7) |
| |
| static int isa1200_power(int on) |
| { |
| int rc = 0; |
| |
| gpio_set_value_cansleep(ISA1200_HAP_CLK, !!on); |
| |
| if (on) |
| rc = pm8xxx_aux_clk_control(CLK_MP3_1, XO_DIV_1, true); |
| else |
| rc = pm8xxx_aux_clk_control(CLK_MP3_1, XO_DIV_NONE, true); |
| |
| if (rc) { |
| pr_err("%s: unable to write aux clock register(%d)\n", |
| __func__, rc); |
| } |
| |
| return rc; |
| } |
| |
| static int isa1200_dev_setup(bool enable) |
| { |
| int rc = 0; |
| |
| if (!enable) |
| goto fail_gpio_dir; |
| |
| rc = gpio_request(ISA1200_HAP_CLK, "haptics_clk"); |
| if (rc) { |
| pr_err("%s: gpio_request for %d gpio failed rc(%d)\n", |
| __func__, ISA1200_HAP_CLK, rc); |
| goto fail_gpio_req; |
| } |
| |
| rc = gpio_direction_output(ISA1200_HAP_CLK, 0); |
| if (rc) { |
| pr_err("%s: gpio_direction_output failed for %d gpio rc(%d)\n", |
| __func__, ISA1200_HAP_CLK, rc); |
| goto fail_gpio_dir; |
| } |
| |
| return 0; |
| |
| fail_gpio_dir: |
| gpio_free(ISA1200_HAP_CLK); |
| fail_gpio_req: |
| return rc; |
| |
| } |
| |
| static struct isa1200_regulator isa1200_reg_data[] = { |
| { |
| .name = "vddp", |
| .min_uV = ISA_I2C_VTG_MIN_UV, |
| .max_uV = ISA_I2C_VTG_MAX_UV, |
| .load_uA = ISA_I2C_CURR_UA, |
| }, |
| { |
| .name = "vcc_i2c", |
| .min_uV = ISA_I2C_VTG_MIN_UV, |
| .max_uV = ISA_I2C_VTG_MAX_UV, |
| .load_uA = ISA_I2C_CURR_UA, |
| }, |
| }; |
| |
| static struct isa1200_platform_data isa1200_1_pdata = { |
| .name = "vibrator", |
| .dev_setup = isa1200_dev_setup, |
| .power_on = isa1200_power, |
| .hap_en_gpio = ISA1200_HAP_EN_GPIO, |
| .hap_len_gpio = ISA1200_HAP_LEN_GPIO, |
| .max_timeout = 15000, |
| .mode_ctrl = PWM_GEN_MODE, |
| .pwm_fd = { |
| .pwm_div = 256, |
| }, |
| .is_erm = false, |
| .smart_en = true, |
| .ext_clk_en = true, |
| .chip_en = 1, |
| .regulator_info = isa1200_reg_data, |
| .num_regulators = ARRAY_SIZE(isa1200_reg_data), |
| }; |
| |
| static struct i2c_board_info msm_isa1200_board_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("isa1200_1", 0x90>>1), |
| .platform_data = &isa1200_1_pdata, |
| }, |
| }; |
| |
| #define MXT_TS_GPIO_IRQ 11 |
| #define MXT_TS_RESET_GPIO 52 |
| |
| static const u8 mxt_config_data_8930[] = { |
| /* T6 Object */ |
| 0, 0, 0, 0, 0, 0, |
| /* T38 Object */ |
| 15, 2, 0, 15, 12, 11, 0, 0, |
| /* T7 Object */ |
| 48, 255, 25, |
| /* T8 Object */ |
| 27, 0, 5, 1, 0, 0, 8, 8, 0, 0, |
| /* T9 Object */ |
| 131, 0, 0, 19, 11, 0, 16, 35, 1, 3, |
| 10, 15, 1, 11, 4, 5, 40, 10, 43, 4, |
| 54, 2, 0, 0, 0, 0, 143, 40, 143, 80, |
| 18, 15, 50, 50, 2, |
| /* T15 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, |
| /* T18 Object */ |
| 0, 0, |
| /* T19 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, |
| /* T23 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, |
| /* T25 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, |
| /* T40 Object */ |
| 0, 0, 0, 0, 0, |
| /* T42 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| /* T46 Object */ |
| 0, 3, 16, 48, 0, 0, 1, 0, 0, |
| /* T47 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| /* T48 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, |
| }; |
| |
| static ssize_t mxt224e_vkeys_show(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| return snprintf(buf, 200, |
| __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":57:1030:90:90" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":206:1030:90:90" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":366:1030:90:90" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":503:1030:90:90" |
| "\n"); |
| } |
| |
| static struct kobj_attribute mxt224e_vkeys_attr = { |
| .attr = { |
| .mode = S_IRUGO, |
| }, |
| .show = &mxt224e_vkeys_show, |
| }; |
| |
| static struct attribute *mxt224e_properties_attrs[] = { |
| &mxt224e_vkeys_attr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group mxt224e_properties_attr_group = { |
| .attrs = mxt224e_properties_attrs, |
| }; |
| |
| static void mxt_init_vkeys_8930(void) |
| { |
| int rc; |
| static struct kobject *mxt224e_properties_kobj; |
| |
| mxt224e_vkeys_attr.attr.name = "virtualkeys.atmel_mxt_ts"; |
| mxt224e_properties_kobj = kobject_create_and_add("board_properties", |
| NULL); |
| if (mxt224e_properties_kobj) |
| rc = sysfs_create_group(mxt224e_properties_kobj, |
| &mxt224e_properties_attr_group); |
| if (!mxt224e_properties_kobj || rc) |
| pr_err("%s: failed to create board_properties\n", |
| __func__); |
| |
| return; |
| } |
| |
| static struct mxt_config_info mxt_config_array[] = { |
| { |
| .config = mxt_config_data_8930, |
| .config_length = ARRAY_SIZE(mxt_config_data_8930), |
| .family_id = 0x81, |
| .variant_id = 0x01, |
| .version = 0x10, |
| .build = 0xAA, |
| }, |
| }; |
| |
| static struct mxt_platform_data mxt_platform_data_8930 = { |
| .config_array = mxt_config_array, |
| .config_array_size = ARRAY_SIZE(mxt_config_array), |
| .panel_minx = 0, |
| .panel_maxx = 566, |
| .panel_miny = 0, |
| .panel_maxy = 1067, |
| .disp_minx = 0, |
| .disp_maxx = 540, |
| .disp_miny = 0, |
| .disp_maxy = 960, |
| .irqflags = IRQF_TRIGGER_FALLING, |
| #ifdef MSM8930_PHASE_2 |
| .digital_pwr_regulator = true, |
| #endif |
| .i2c_pull_up = true, |
| .reset_gpio = MXT_TS_RESET_GPIO, |
| .irq_gpio = MXT_TS_GPIO_IRQ, |
| }; |
| |
| static struct i2c_board_info mxt_device_info_8930[] __initdata = { |
| { |
| I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), |
| .platform_data = &mxt_platform_data_8930, |
| .irq = MSM_GPIO_TO_INT(MXT_TS_GPIO_IRQ), |
| }, |
| }; |
| |
| #ifdef MSM8930_PHASE_2 |
| |
| #define GPIO_VOLUME_UP PM8038_GPIO_PM_TO_SYS(3) |
| #define GPIO_VOLUME_DOWN PM8038_GPIO_PM_TO_SYS(8) |
| #define GPIO_CAMERA_SNAPSHOT PM8038_GPIO_PM_TO_SYS(10) |
| #define GPIO_CAMERA_FOCUS PM8038_GPIO_PM_TO_SYS(11) |
| |
| static struct gpio_keys_button keys_8930[] = { |
| { |
| .code = KEY_VOLUMEUP, |
| .type = EV_KEY, |
| .desc = "volume_up", |
| .gpio = GPIO_VOLUME_UP, |
| .wakeup = 1, |
| .active_low = 1, |
| }, |
| { |
| .code = KEY_VOLUMEDOWN, |
| .type = EV_KEY, |
| .desc = "volume_down", |
| .gpio = GPIO_VOLUME_DOWN, |
| .wakeup = 1, |
| .active_low = 1, |
| }, |
| { |
| .code = KEY_CAMERA_FOCUS, |
| .type = EV_KEY, |
| .desc = "camera_focus", |
| .gpio = GPIO_CAMERA_FOCUS, |
| .wakeup = 1, |
| .active_low = 1, |
| }, |
| { |
| .code = KEY_CAMERA_SNAPSHOT, |
| .type = EV_KEY, |
| .desc = "camera_snapshot", |
| .gpio = GPIO_CAMERA_SNAPSHOT, |
| .wakeup = 1, |
| .active_low = 1, |
| }, |
| }; |
| |
| /* Add GPIO keys for 8930 */ |
| static struct gpio_keys_platform_data gpio_keys_8930_pdata = { |
| .buttons = keys_8930, |
| .nbuttons = 4, |
| }; |
| |
| static struct platform_device gpio_keys_8930 = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &gpio_keys_8930_pdata, |
| }, |
| }; |
| #endif /* MSM8930_PHASE_2 */ |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi4_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi3_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi9_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi10_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data msm8960_i2c_qup_gsbi12_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| |
| static struct ks8851_pdata spi_eth_pdata = { |
| .irq_gpio = KS8851_IRQ_GPIO, |
| .rst_gpio = KS8851_RST_GPIO, |
| }; |
| |
| static struct spi_board_info spi_board_info[] __initdata = { |
| { |
| .modalias = "ks8851", |
| .irq = MSM_GPIO_TO_INT(KS8851_IRQ_GPIO), |
| .max_speed_hz = 19200000, |
| .bus_num = 0, |
| .chip_select = 0, |
| .mode = SPI_MODE_0, |
| .platform_data = &spi_eth_pdata |
| }, |
| { |
| .modalias = "dsi_novatek_3d_panel_spi", |
| .max_speed_hz = 10800000, |
| .bus_num = 0, |
| .chip_select = 1, |
| .mode = SPI_MODE_0, |
| }, |
| }; |
| |
| static struct platform_device msm_device_saw_core0 = { |
| .name = "saw-regulator", |
| .id = 0, |
| .dev = { |
| .platform_data = &msm8930_saw_regulator_core0_pdata, |
| }, |
| }; |
| |
| static struct platform_device msm_device_saw_core1 = { |
| .name = "saw-regulator", |
| .id = 1, |
| .dev = { |
| .platform_data = &msm8930_saw_regulator_core1_pdata, |
| }, |
| }; |
| |
| static struct tsens_platform_data msm_tsens_pdata = { |
| .tsens_factor = 1000, |
| .hw_type = APQ_8064, |
| .tsens_num_sensor = 10, |
| .slope = {1132, 1135, 1137, 1135, 1157, |
| 1142, 1124, 1153, 1175, 1166}, |
| }; |
| |
| static struct platform_device msm_tsens_device = { |
| .name = "tsens8960-tm", |
| .id = -1, |
| }; |
| |
| #ifdef CONFIG_MSM_FAKE_BATTERY |
| static struct platform_device fish_battery_device = { |
| .name = "fish_battery", |
| }; |
| #endif |
| |
| #ifndef MSM8930_PHASE_2 |
| |
| /* 8930 Phase 1 */ |
| static struct platform_device msm8930_device_ext_5v_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = PM8921_MPP_PM_TO_SYS(7), |
| .dev = { |
| .platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_5V], |
| }, |
| }; |
| |
| static struct platform_device msm8930_device_ext_l2_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = 91, |
| .dev = { |
| .platform_data = &msm_gpio_regulator_pdata[GPIO_VREG_ID_EXT_L2], |
| }, |
| }; |
| |
| #else |
| |
| /* 8930 Phase 2 */ |
| static struct platform_device msm8930_device_ext_5v_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = 63, |
| .dev = { |
| .platform_data = |
| &msm8930_gpio_regulator_pdata[MSM8930_GPIO_VREG_ID_EXT_5V], |
| }, |
| }; |
| |
| static struct platform_device msm8930_device_ext_otg_sw_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = 97, |
| .dev = { |
| .platform_data = |
| &msm8930_gpio_regulator_pdata[MSM8930_GPIO_VREG_ID_EXT_OTG_SW], |
| }, |
| }; |
| |
| #endif |
| |
| static struct platform_device msm8930_device_rpm_regulator __devinitdata = { |
| .name = "rpm-regulator", |
| .id = -1, |
| .dev = { |
| #ifndef MSM8930_PHASE_2 |
| .platform_data = &msm_rpm_regulator_pdata, |
| #else |
| .platform_data = &msm8930_rpm_regulator_pdata, |
| #endif |
| }, |
| }; |
| |
| static struct platform_device *common_devices[] __initdata = { |
| &msm8960_device_dmov, |
| &msm_device_smd, |
| &msm8960_device_uart_gsbi5, |
| &msm_device_uart_dm6, |
| &msm_device_saw_core0, |
| &msm_device_saw_core1, |
| &msm8930_device_ext_5v_vreg, |
| #ifndef MSM8930_PHASE_2 |
| &msm8930_device_ext_l2_vreg, |
| #endif |
| &msm8960_device_ssbi_pmic, |
| #ifdef MSM8930_PHASE_2 |
| &msm8930_device_ext_otg_sw_vreg, |
| #endif |
| &msm_8960_q6_lpass, |
| &msm_8960_q6_mss_fw, |
| &msm_8960_q6_mss_sw, |
| &msm_8960_riva, |
| &msm_pil_tzapps, |
| &msm_pil_vidc, |
| &msm8960_device_qup_spi_gsbi1, |
| &msm8960_device_qup_i2c_gsbi3, |
| &msm8960_device_qup_i2c_gsbi4, |
| &msm8960_device_qup_i2c_gsbi9, |
| &msm8960_device_qup_i2c_gsbi10, |
| &msm8960_device_qup_i2c_gsbi12, |
| &msm_slim_ctrl, |
| &msm_device_wcnss_wlan, |
| #if defined(CONFIG_QSEECOM) |
| &qseecom_device, |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) |
| &qcrypto_device, |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| &qcedev_device, |
| #endif |
| #ifdef CONFIG_MSM_ROTATOR |
| &msm_rotator_device, |
| #endif |
| &msm_device_sps, |
| #ifdef CONFIG_MSM_FAKE_BATTERY |
| &fish_battery_device, |
| #endif |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| &msm8930_android_pmem_device, |
| &msm8930_android_pmem_adsp_device, |
| &msm8930_android_pmem_audio_device, |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| &msm8930_fmem_device, |
| &msm_device_bam_dmux, |
| &msm_fm_platform_init, |
| |
| #ifdef CONFIG_HW_RANDOM_MSM |
| &msm_device_rng, |
| #endif |
| &msm8930_rpm_device, |
| &msm8930_rpm_log_device, |
| &msm8930_rpm_stat_device, |
| #ifdef CONFIG_ION_MSM |
| &msm8930_ion_dev, |
| #endif |
| &msm_device_tz_log, |
| |
| #ifdef CONFIG_MSM_QDSS |
| &msm_qdss_device, |
| &msm_etb_device, |
| &msm_tpiu_device, |
| &msm_funnel_device, |
| &msm_etm_device, |
| #endif |
| &msm_device_dspcrashd_8960, |
| &msm8960_device_watchdog, |
| #ifdef MSM8930_PHASE_2 |
| &gpio_keys_8930, |
| #endif |
| &msm8930_rtb_device, |
| &msm8930_cpu_idle_device, |
| &msm8930_msm_gov_device, |
| &msm_bus_8930_apps_fabric, |
| &msm_bus_8930_sys_fabric, |
| &msm_bus_8930_mm_fabric, |
| &msm_bus_8930_sys_fpb, |
| &msm_bus_8930_cpss_fpb, |
| &msm8960_device_cache_erp, |
| &msm8930_iommu_domain_device, |
| &msm_tsens_device, |
| }; |
| |
| static struct platform_device *cdp_devices[] __initdata = { |
| &msm8960_device_otg, |
| &msm8960_device_gadget_peripheral, |
| &msm_device_hsusb_host, |
| &android_usb_device, |
| &msm_pcm, |
| &msm_pcm_routing, |
| &msm_cpudai0, |
| &msm_cpudai1, |
| &msm_cpudai_hdmi_rx, |
| &msm_cpudai_bt_rx, |
| &msm_cpudai_bt_tx, |
| &msm_cpudai_fm_rx, |
| &msm_cpudai_fm_tx, |
| &msm_cpudai_auxpcm_rx, |
| &msm_cpudai_auxpcm_tx, |
| &msm_cpu_fe, |
| &msm_stub_codec, |
| #ifdef CONFIG_MSM_GEMINI |
| &msm8960_gemini_device, |
| #endif |
| &msm_voice, |
| &msm_voip, |
| &msm_lpa_pcm, |
| &msm_cpudai_afe_01_rx, |
| &msm_cpudai_afe_01_tx, |
| &msm_cpudai_afe_02_rx, |
| &msm_cpudai_afe_02_tx, |
| &msm_pcm_afe, |
| &msm_compr_dsp, |
| &msm_cpudai_incall_music_rx, |
| &msm_cpudai_incall_record_rx, |
| &msm_cpudai_incall_record_tx, |
| &msm_pcm_hostless, |
| }; |
| |
| static void __init msm8930_i2c_init(void) |
| { |
| msm8960_device_qup_i2c_gsbi4.dev.platform_data = |
| &msm8960_i2c_qup_gsbi4_pdata; |
| |
| msm8960_device_qup_i2c_gsbi3.dev.platform_data = |
| &msm8960_i2c_qup_gsbi3_pdata; |
| |
| msm8960_device_qup_i2c_gsbi9.dev.platform_data = |
| &msm8960_i2c_qup_gsbi9_pdata; |
| |
| msm8960_device_qup_i2c_gsbi10.dev.platform_data = |
| &msm8960_i2c_qup_gsbi10_pdata; |
| |
| msm8960_device_qup_i2c_gsbi12.dev.platform_data = |
| &msm8960_i2c_qup_gsbi12_pdata; |
| } |
| |
| static struct msm_rpmrs_level msm_rpmrs_levels[] __initdata = { |
| { |
| MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT, |
| MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), |
| true, |
| 100, 650, 801, 200, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE, |
| MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), |
| true, |
| 2000, 200, 576000, 2000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, GDHS, MAX, ACTIVE), |
| false, |
| 8500, 51, 1122000, 8500, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, HSFS_OPEN, MAX, ACTIVE), |
| false, |
| 9000, 51, 1130300, 9000, |
| }, |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, HSFS_OPEN, ACTIVE, RET_HIGH), |
| false, |
| 10000, 51, 1130300, 10000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, GDHS, MAX, ACTIVE), |
| false, |
| 12000, 14, 2205900, 12000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, MAX, ACTIVE), |
| false, |
| 18000, 12, 2364250, 18000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, ACTIVE, RET_HIGH), |
| false, |
| 23500, 10, 2667000, 23500, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, RET_HIGH, RET_LOW), |
| false, |
| 29700, 5, 2867000, 30000, |
| }, |
| }; |
| |
| static struct msm_rpmrs_platform_data msm_rpmrs_data __initdata = { |
| .levels = &msm_rpmrs_levels[0], |
| .num_levels = ARRAY_SIZE(msm_rpmrs_levels), |
| .vdd_mem_levels = { |
| [MSM_RPMRS_VDD_MEM_RET_LOW] = 750000, |
| [MSM_RPMRS_VDD_MEM_RET_HIGH] = 750000, |
| [MSM_RPMRS_VDD_MEM_ACTIVE] = 1050000, |
| [MSM_RPMRS_VDD_MEM_MAX] = 1150000, |
| }, |
| .vdd_dig_levels = { |
| [MSM_RPMRS_VDD_DIG_RET_LOW] = 500000, |
| [MSM_RPMRS_VDD_DIG_RET_HIGH] = 750000, |
| [MSM_RPMRS_VDD_DIG_ACTIVE] = 950000, |
| [MSM_RPMRS_VDD_DIG_MAX] = 1150000, |
| }, |
| .vdd_mask = 0x7FFFFF, |
| .rpmrs_target_id = { |
| [MSM_RPMRS_ID_PXO_CLK] = MSM_RPM_ID_PXO_CLK, |
| [MSM_RPMRS_ID_L2_CACHE_CTL] = MSM_RPM_ID_LAST, |
| [MSM_RPMRS_ID_VDD_DIG_0] = MSM_RPM_ID_PM8038_S1_0, |
| [MSM_RPMRS_ID_VDD_DIG_1] = MSM_RPM_ID_PM8038_S1_1, |
| [MSM_RPMRS_ID_VDD_MEM_0] = MSM_RPM_ID_PM8038_L24_0, |
| [MSM_RPMRS_ID_VDD_MEM_1] = MSM_RPM_ID_PM8038_L24_1, |
| [MSM_RPMRS_ID_RPM_CTL] = MSM_RPM_ID_RPM_CTL, |
| }, |
| }; |
| |
| static struct msm_pm_boot_platform_data msm_pm_boot_pdata __initdata = { |
| .mode = MSM_PM_BOOT_CONFIG_TZ, |
| }; |
| |
| static struct msm_pm_sleep_status_data msm_pm_slp_sts_data = { |
| .base_addr = MSM_ACC0_BASE + 0x08, |
| .cpu_offset = MSM_ACC1_BASE - MSM_ACC0_BASE, |
| .mask = 1UL << 13, |
| }; |
| |
| #ifdef CONFIG_I2C |
| #define I2C_SURF 1 |
| #define I2C_FFA (1 << 1) |
| #define I2C_RUMI (1 << 2) |
| #define I2C_SIM (1 << 3) |
| #define I2C_FLUID (1 << 4) |
| #define I2C_LIQUID (1 << 5) |
| |
| struct i2c_registry { |
| u8 machs; |
| int bus; |
| struct i2c_board_info *info; |
| int len; |
| }; |
| |
| #ifdef CONFIG_ISL9519_CHARGER |
| static struct isl_platform_data isl_data __initdata = { |
| .valid_n_gpio = 0, /* Not required when notify-by-pmic */ |
| .chg_detection_config = NULL, /* Not required when notify-by-pmic */ |
| .max_system_voltage = 4200, |
| .min_system_voltage = 3200, |
| .chgcurrent = 1000, /* 1900, */ |
| .term_current = 400, /* Need fine tuning */ |
| .input_current = 2048, |
| }; |
| |
| static struct i2c_board_info isl_charger_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("isl9519q", 0x9), |
| .irq = 0, /* Not required when notify-by-pmic */ |
| .platform_data = &isl_data, |
| }, |
| }; |
| #endif /* CONFIG_ISL9519_CHARGER */ |
| |
| static struct i2c_registry msm8960_i2c_devices[] __initdata = { |
| #ifdef CONFIG_ISL9519_CHARGER |
| { |
| I2C_LIQUID, |
| MSM_8930_GSBI10_QUP_I2C_BUS_ID, |
| isl_charger_i2c_info, |
| ARRAY_SIZE(isl_charger_i2c_info), |
| }, |
| #endif /* CONFIG_ISL9519_CHARGER */ |
| { |
| I2C_SURF | I2C_FFA | I2C_FLUID, |
| MSM_8930_GSBI9_QUP_I2C_BUS_ID, |
| msm_isa1200_board_info, |
| ARRAY_SIZE(msm_isa1200_board_info), |
| }, |
| { |
| I2C_SURF | I2C_FFA | I2C_FLUID, |
| MSM_8930_GSBI3_QUP_I2C_BUS_ID, |
| mxt_device_info_8930, |
| ARRAY_SIZE(mxt_device_info_8930), |
| }, |
| }; |
| #endif /* CONFIG_I2C */ |
| |
| static void __init register_i2c_devices(void) |
| { |
| #ifdef CONFIG_I2C |
| u8 mach_mask = 0; |
| int i; |
| #ifdef CONFIG_MSM_CAMERA |
| struct i2c_registry msm8930_camera_i2c_devices = { |
| I2C_SURF | I2C_FFA | I2C_FLUID | I2C_LIQUID | I2C_RUMI, |
| MSM_8930_GSBI4_QUP_I2C_BUS_ID, |
| msm8930_camera_board_info.board_info, |
| msm8930_camera_board_info.num_i2c_board_info, |
| }; |
| #endif |
| |
| /* Build the matching 'supported_machs' bitmask */ |
| if (machine_is_msm8930_cdp() || machine_is_msm8627_cdp()) |
| mach_mask = I2C_SURF; |
| else if (machine_is_msm8930_fluid()) |
| mach_mask = I2C_FLUID; |
| else if (machine_is_msm8930_mtp() || machine_is_msm8627_mtp()) |
| mach_mask = I2C_FFA; |
| else |
| pr_err("unmatched machine ID in register_i2c_devices\n"); |
| |
| /* Run the array and install devices as appropriate */ |
| for (i = 0; i < ARRAY_SIZE(msm8960_i2c_devices); ++i) { |
| if (msm8960_i2c_devices[i].machs & mach_mask) |
| i2c_register_board_info(msm8960_i2c_devices[i].bus, |
| msm8960_i2c_devices[i].info, |
| msm8960_i2c_devices[i].len); |
| } |
| #ifdef CONFIG_MSM_CAMERA |
| if (msm8930_camera_i2c_devices.machs & mach_mask) |
| i2c_register_board_info(msm8930_camera_i2c_devices.bus, |
| msm8930_camera_i2c_devices.info, |
| msm8930_camera_i2c_devices.len); |
| #endif |
| #endif |
| } |
| |
| static void __init msm8930_cdp_init(void) |
| { |
| if (meminfo_init(SYS_MEMORY, SZ_256M) < 0) |
| pr_err("meminfo_init() failed!\n"); |
| |
| msm_tsens_early_init(&msm_tsens_pdata); |
| BUG_ON(msm_rpm_init(&msm8930_rpm_data)); |
| BUG_ON(msm_rpmrs_levels_init(&msm_rpmrs_data)); |
| |
| regulator_suppress_info_printing(); |
| if (msm_xo_init()) |
| pr_err("Failed to initialize XO votes\n"); |
| platform_device_register(&msm8930_device_rpm_regulator); |
| msm_clock_init(&msm8930_clock_init_data); |
| msm8960_device_otg.dev.platform_data = &msm_otg_pdata; |
| msm8930_init_gpiomux(); |
| msm8960_device_qup_spi_gsbi1.dev.platform_data = |
| &msm8960_qup_spi_gsbi1_pdata; |
| spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); |
| |
| /* |
| * TODO: When physical 8930/PM8038 hardware becomes |
| * available, remove this block or add the config |
| * option. |
| */ |
| #ifndef MSM8930_PHASE_2 |
| msm8960_init_pmic(); |
| #else |
| msm8930_init_pmic(); |
| #endif |
| msm8930_i2c_init(); |
| msm8930_init_gpu(); |
| msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data)); |
| msm_spm_l2_init(msm_spm_l2_data); |
| msm8930_init_buses(); |
| platform_add_devices(msm8930_footswitch, msm8930_num_footswitch); |
| platform_add_devices(common_devices, ARRAY_SIZE(common_devices)); |
| msm8930_add_vidc_device(); |
| /* |
| * TODO: When physical 8930/PM8038 hardware becomes |
| * available, remove this block or add the config |
| * option. |
| */ |
| #ifndef MSM8930_PHASE_2 |
| msm8960_pm8921_gpio_mpp_init(); |
| #else |
| msm8930_pm8038_gpio_mpp_init(); |
| #endif |
| platform_add_devices(cdp_devices, ARRAY_SIZE(cdp_devices)); |
| msm8930_init_cam(); |
| msm8930_init_mmc(); |
| acpuclk_init(&acpuclk_8930_soc_data); |
| mxt_init_vkeys_8930(); |
| register_i2c_devices(); |
| msm8930_init_fb(); |
| slim_register_board_info(msm_slim_devices, |
| ARRAY_SIZE(msm_slim_devices)); |
| change_memory_power = &msm8930_change_memory_power; |
| BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata)); |
| msm_pm_init_sleep_status_data(&msm_pm_slp_sts_data); |
| |
| if (PLATFORM_IS_CHARM25()) |
| platform_add_devices(mdm_devices, ARRAY_SIZE(mdm_devices)); |
| } |
| |
| MACHINE_START(MSM8930_CDP, "QCT MSM8930 CDP") |
| .map_io = msm8930_map_io, |
| .reserve = msm8930_reserve, |
| .init_irq = msm8930_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8930_cdp_init, |
| .init_early = msm8930_allocate_memory_regions, |
| .init_very_early = msm8930_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8930_MTP, "QCT MSM8930 MTP") |
| .map_io = msm8930_map_io, |
| .reserve = msm8930_reserve, |
| .init_irq = msm8930_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8930_cdp_init, |
| .init_early = msm8930_allocate_memory_regions, |
| .init_very_early = msm8930_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8930_FLUID, "QCT MSM8930 FLUID") |
| .map_io = msm8930_map_io, |
| .reserve = msm8930_reserve, |
| .init_irq = msm8930_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8930_cdp_init, |
| .init_early = msm8930_allocate_memory_regions, |
| .init_very_early = msm8930_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8627_CDP, "QCT MSM8627 CDP") |
| .map_io = msm8930_map_io, |
| .reserve = msm8930_reserve, |
| .init_irq = msm8930_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8930_cdp_init, |
| .init_early = msm8930_allocate_memory_regions, |
| .init_very_early = msm8930_early_memory, |
| MACHINE_END |
| |
| MACHINE_START(MSM8627_MTP, "QCT MSM8627 MTP") |
| .map_io = msm8930_map_io, |
| .reserve = msm8930_reserve, |
| .init_irq = msm8930_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = msm8930_cdp_init, |
| .init_early = msm8930_allocate_memory_regions, |
| .init_very_early = msm8930_early_memory, |
| MACHINE_END |