| /* Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/rtc.h> |
| #include <linux/pm.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| |
| #include <linux/mfd/pm8xxx/core.h> |
| #include <linux/mfd/pm8xxx/rtc.h> |
| |
| |
| /* RTC Register offsets from RTC CTRL REG */ |
| #define PM8XXX_ALARM_CTRL_OFFSET 0x01 |
| #define PM8XXX_RTC_WRITE_OFFSET 0x02 |
| #define PM8XXX_RTC_READ_OFFSET 0x06 |
| #define PM8XXX_ALARM_RW_OFFSET 0x0A |
| |
| /* RTC_CTRL register bit fields */ |
| #define PM8xxx_RTC_ENABLE BIT(7) |
| #define PM8xxx_RTC_ALARM_ENABLE BIT(1) |
| #define PM8xxx_RTC_ALARM_CLEAR BIT(0) |
| #define PM8xxx_RTC_ABORT_ENABLE BIT(0) |
| |
| #define NUM_8_BIT_RTC_REGS 0x4 |
| |
| /** |
| * struct pm8xxx_rtc - rtc driver internal structure |
| * @rtc: rtc device for this driver. |
| * @rtc_alarm_irq: rtc alarm irq number. |
| * @rtc_base: address of rtc control register. |
| * @rtc_read_base: base address of read registers. |
| * @rtc_write_base: base address of write registers. |
| * @alarm_rw_base: base address of alarm registers. |
| * @ctrl_reg: rtc control register. |
| * @rtc_dev: device structure. |
| * @ctrl_reg_lock: spinlock protecting access to ctrl_reg. |
| */ |
| struct pm8xxx_rtc { |
| struct rtc_device *rtc; |
| int rtc_alarm_irq; |
| int rtc_base; |
| int rtc_read_base; |
| int rtc_write_base; |
| int alarm_rw_base; |
| u8 ctrl_reg; |
| struct device *rtc_dev; |
| spinlock_t ctrl_reg_lock; |
| }; |
| |
| /* |
| * The RTC registers need to be read/written one byte at a time. This is a |
| * hardware limitation. |
| */ |
| static int pm8xxx_read_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val, |
| int base, int count) |
| { |
| int i, rc; |
| struct device *parent = rtc_dd->rtc_dev->parent; |
| |
| for (i = 0; i < count; i++) { |
| rc = pm8xxx_readb(parent, base + i, &rtc_val[i]); |
| if (rc < 0) { |
| dev_err(rtc_dd->rtc_dev, "PMIC read failed\n"); |
| return rc; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int pm8xxx_write_wrapper(struct pm8xxx_rtc *rtc_dd, u8 *rtc_val, |
| int base, int count) |
| { |
| int i, rc; |
| struct device *parent = rtc_dd->rtc_dev->parent; |
| |
| for (i = 0; i < count; i++) { |
| rc = pm8xxx_writeb(parent, base + i, rtc_val[i]); |
| if (rc < 0) { |
| dev_err(rtc_dd->rtc_dev, "PMIC write failed\n"); |
| return rc; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Steps to write the RTC registers. |
| * 1. Disable alarm if enabled. |
| * 2. Write 0x00 to LSB. |
| * 3. Write Byte[1], Byte[2], Byte[3] then Byte[0]. |
| * 4. Enable alarm if disabled in step 1. |
| */ |
| static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| int rc, i; |
| unsigned long secs, irq_flags; |
| u8 value[NUM_8_BIT_RTC_REGS], reg = 0, alarm_enabled = 0, ctrl_reg; |
| struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); |
| |
| rtc_tm_to_time(tm, &secs); |
| |
| for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) { |
| value[i] = secs & 0xFF; |
| secs >>= 8; |
| } |
| |
| dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs); |
| |
| spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); |
| ctrl_reg = rtc_dd->ctrl_reg; |
| |
| if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) { |
| alarm_enabled = 1; |
| ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE; |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, |
| 1); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC control register " |
| "failed\n"); |
| goto rtc_rw_fail; |
| } |
| rtc_dd->ctrl_reg = ctrl_reg; |
| } else |
| spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); |
| |
| /* Write 0 to Byte[0] */ |
| reg = 0; |
| rc = pm8xxx_write_wrapper(rtc_dd, ®, rtc_dd->rtc_write_base, 1); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC write data register failed\n"); |
| goto rtc_rw_fail; |
| } |
| |
| /* Write Byte[1], Byte[2], Byte[3] */ |
| rc = pm8xxx_write_wrapper(rtc_dd, value + 1, |
| rtc_dd->rtc_write_base + 1, 3); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC write data register failed\n"); |
| goto rtc_rw_fail; |
| } |
| |
| /* Write Byte[0] */ |
| rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->rtc_write_base, 1); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC write data register failed\n"); |
| goto rtc_rw_fail; |
| } |
| |
| if (alarm_enabled) { |
| ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE; |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, |
| 1); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC control register " |
| "failed\n"); |
| goto rtc_rw_fail; |
| } |
| rtc_dd->ctrl_reg = ctrl_reg; |
| } |
| |
| rtc_rw_fail: |
| if (alarm_enabled) |
| spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); |
| |
| return rc; |
| } |
| |
| static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| int rc; |
| u8 value[NUM_8_BIT_RTC_REGS], reg; |
| unsigned long secs; |
| struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); |
| |
| rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->rtc_read_base, |
| NUM_8_BIT_RTC_REGS); |
| if (rc < 0) { |
| dev_err(dev, "RTC read data register failed\n"); |
| return rc; |
| } |
| |
| /* |
| * Read the LSB again and check if there has been a carry over. |
| * If there is, redo the read operation. |
| */ |
| rc = pm8xxx_read_wrapper(rtc_dd, ®, rtc_dd->rtc_read_base, 1); |
| if (rc < 0) { |
| dev_err(dev, "RTC read data register failed\n"); |
| return rc; |
| } |
| |
| if (unlikely(reg < value[0])) { |
| rc = pm8xxx_read_wrapper(rtc_dd, value, |
| rtc_dd->rtc_read_base, NUM_8_BIT_RTC_REGS); |
| if (rc < 0) { |
| dev_err(dev, "RTC read data register failed\n"); |
| return rc; |
| } |
| } |
| |
| secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24); |
| |
| rtc_time_to_tm(secs, tm); |
| |
| rc = rtc_valid_tm(tm); |
| if (rc < 0) { |
| dev_err(dev, "Invalid time read from RTC\n"); |
| return rc; |
| } |
| |
| dev_dbg(dev, "secs = %lu, h:m:s == %d:%d:%d, d/m/y = %d/%d/%d\n", |
| secs, tm->tm_hour, tm->tm_min, tm->tm_sec, |
| tm->tm_mday, tm->tm_mon, tm->tm_year); |
| |
| return 0; |
| } |
| |
| static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| { |
| int rc, i; |
| u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg; |
| unsigned long secs, irq_flags; |
| struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); |
| |
| rtc_tm_to_time(&alarm->time, &secs); |
| |
| for (i = 0; i < NUM_8_BIT_RTC_REGS; i++) { |
| value[i] = secs & 0xFF; |
| secs >>= 8; |
| } |
| |
| spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); |
| |
| rc = pm8xxx_write_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base, |
| NUM_8_BIT_RTC_REGS); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC ALARM register failed\n"); |
| goto rtc_rw_fail; |
| } |
| |
| ctrl_reg = rtc_dd->ctrl_reg; |
| ctrl_reg = alarm->enabled ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) : |
| (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE); |
| |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC control register failed\n"); |
| goto rtc_rw_fail; |
| } |
| |
| rtc_dd->ctrl_reg = ctrl_reg; |
| |
| dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n", |
| alarm->time.tm_hour, alarm->time.tm_min, |
| alarm->time.tm_sec, alarm->time.tm_mday, |
| alarm->time.tm_mon, alarm->time.tm_year); |
| rtc_rw_fail: |
| spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); |
| return rc; |
| } |
| |
| static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| { |
| int rc; |
| u8 value[NUM_8_BIT_RTC_REGS]; |
| unsigned long secs; |
| struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); |
| |
| rc = pm8xxx_read_wrapper(rtc_dd, value, rtc_dd->alarm_rw_base, |
| NUM_8_BIT_RTC_REGS); |
| if (rc < 0) { |
| dev_err(dev, "RTC alarm time read failed\n"); |
| return rc; |
| } |
| |
| secs = value[0] | (value[1] << 8) | (value[2] << 16) | (value[3] << 24); |
| |
| rtc_time_to_tm(secs, &alarm->time); |
| |
| rc = rtc_valid_tm(&alarm->time); |
| if (rc < 0) { |
| dev_err(dev, "Invalid alarm time read from RTC\n"); |
| return rc; |
| } |
| |
| dev_dbg(dev, "Alarm set for - h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n", |
| alarm->time.tm_hour, alarm->time.tm_min, |
| alarm->time.tm_sec, alarm->time.tm_mday, |
| alarm->time.tm_mon, alarm->time.tm_year); |
| |
| return 0; |
| } |
| |
| static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable) |
| { |
| int rc; |
| unsigned long irq_flags; |
| struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); |
| u8 ctrl_reg; |
| |
| spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); |
| ctrl_reg = rtc_dd->ctrl_reg; |
| ctrl_reg = (enable) ? (ctrl_reg | PM8xxx_RTC_ALARM_ENABLE) : |
| (ctrl_reg & ~PM8xxx_RTC_ALARM_ENABLE); |
| |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); |
| if (rc < 0) { |
| dev_err(dev, "Write to RTC control register failed\n"); |
| goto rtc_rw_fail; |
| } |
| |
| rtc_dd->ctrl_reg = ctrl_reg; |
| |
| rtc_rw_fail: |
| spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); |
| return rc; |
| } |
| |
| static struct rtc_class_ops pm8xxx_rtc_ops = { |
| .read_time = pm8xxx_rtc_read_time, |
| .set_alarm = pm8xxx_rtc_set_alarm, |
| .read_alarm = pm8xxx_rtc_read_alarm, |
| .alarm_irq_enable = pm8xxx_rtc_alarm_irq_enable, |
| }; |
| |
| static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id) |
| { |
| struct pm8xxx_rtc *rtc_dd = dev_id; |
| u8 ctrl_reg; |
| int rc; |
| unsigned long irq_flags; |
| |
| rtc_update_irq(rtc_dd->rtc, 1, RTC_IRQF | RTC_AF); |
| |
| spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); |
| |
| /* Clear the alarm enable bit */ |
| ctrl_reg = rtc_dd->ctrl_reg; |
| ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE; |
| |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); |
| if (rc < 0) { |
| spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); |
| dev_err(rtc_dd->rtc_dev, "Write to RTC control register " |
| "failed\n"); |
| goto rtc_alarm_handled; |
| } |
| |
| rtc_dd->ctrl_reg = ctrl_reg; |
| spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); |
| |
| /* Clear RTC alarm register */ |
| rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base + |
| PM8XXX_ALARM_CTRL_OFFSET, 1); |
| if (rc < 0) { |
| dev_err(rtc_dd->rtc_dev, "RTC Alarm control register read " |
| "failed\n"); |
| goto rtc_alarm_handled; |
| } |
| |
| ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR; |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base + |
| PM8XXX_ALARM_CTRL_OFFSET, 1); |
| if (rc < 0) |
| dev_err(rtc_dd->rtc_dev, "Write to RTC Alarm control register" |
| " failed\n"); |
| |
| rtc_alarm_handled: |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit pm8xxx_rtc_probe(struct platform_device *pdev) |
| { |
| int rc; |
| u8 ctrl_reg; |
| bool rtc_write_enable = false; |
| struct pm8xxx_rtc *rtc_dd; |
| struct resource *rtc_resource; |
| const struct pm8xxx_rtc_platform_data *pdata = |
| dev_get_platdata(&pdev->dev); |
| |
| if (pdata != NULL) |
| rtc_write_enable = pdata->rtc_write_enable; |
| |
| rtc_dd = kzalloc(sizeof(*rtc_dd), GFP_KERNEL); |
| if (rtc_dd == NULL) { |
| dev_err(&pdev->dev, "Unable to allocate memory!\n"); |
| return -ENOMEM; |
| } |
| |
| /* Initialise spinlock to protect RTC control register */ |
| spin_lock_init(&rtc_dd->ctrl_reg_lock); |
| |
| rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0); |
| if (rtc_dd->rtc_alarm_irq < 0) { |
| dev_err(&pdev->dev, "Alarm IRQ resource absent!\n"); |
| rc = -ENXIO; |
| goto fail_rtc_enable; |
| } |
| |
| rtc_resource = platform_get_resource_byname(pdev, IORESOURCE_IO, |
| "pmic_rtc_base"); |
| if (!(rtc_resource && rtc_resource->start)) { |
| dev_err(&pdev->dev, "RTC IO resource absent!\n"); |
| rc = -ENXIO; |
| goto fail_rtc_enable; |
| } |
| |
| rtc_dd->rtc_base = rtc_resource->start; |
| |
| /* Setup RTC register addresses */ |
| rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET; |
| rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET; |
| rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET; |
| |
| rtc_dd->rtc_dev = &pdev->dev; |
| |
| /* Check if the RTC is on, else turn it on */ |
| rc = pm8xxx_read_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "RTC control register read failed!\n"); |
| goto fail_rtc_enable; |
| } |
| |
| if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) { |
| ctrl_reg |= PM8xxx_RTC_ENABLE; |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, |
| 1); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "Write to RTC control register " |
| "failed\n"); |
| goto fail_rtc_enable; |
| } |
| } |
| |
| /* Enable abort enable feature */ |
| ctrl_reg |= PM8xxx_RTC_ABORT_ENABLE; |
| rc = pm8xxx_write_wrapper(rtc_dd, &ctrl_reg, rtc_dd->rtc_base, 1); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "PM8xxx write failed!\n"); |
| goto fail_rtc_enable; |
| } |
| |
| rtc_dd->ctrl_reg = ctrl_reg; |
| if (rtc_write_enable == true) |
| pm8xxx_rtc_ops.set_time = pm8xxx_rtc_set_time; |
| |
| platform_set_drvdata(pdev, rtc_dd); |
| |
| device_init_wakeup(&pdev->dev, 1); |
| |
| /* Register the RTC device */ |
| rtc_dd->rtc = rtc_device_register("pm8xxx_rtc", &pdev->dev, |
| &pm8xxx_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc_dd->rtc)) { |
| dev_err(&pdev->dev, "%s: RTC registration failed (%ld)\n", |
| __func__, PTR_ERR(rtc_dd->rtc)); |
| rc = PTR_ERR(rtc_dd->rtc); |
| goto fail_rtc_enable; |
| } |
| |
| /* Request the alarm IRQ */ |
| rc = request_any_context_irq(rtc_dd->rtc_alarm_irq, |
| pm8xxx_alarm_trigger, IRQF_TRIGGER_RISING, |
| "pm8xxx_rtc_alarm", rtc_dd); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "Request IRQ failed (%d)\n", rc); |
| goto fail_req_irq; |
| } |
| |
| dev_dbg(&pdev->dev, "Probe success !!\n"); |
| |
| return 0; |
| |
| fail_req_irq: |
| rtc_device_unregister(rtc_dd->rtc); |
| fail_rtc_enable: |
| platform_set_drvdata(pdev, NULL); |
| kfree(rtc_dd); |
| return rc; |
| } |
| |
| static int __devexit pm8xxx_rtc_remove(struct platform_device *pdev) |
| { |
| struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev); |
| |
| device_init_wakeup(&pdev->dev, 0); |
| free_irq(rtc_dd->rtc_alarm_irq, rtc_dd); |
| rtc_device_unregister(rtc_dd->rtc); |
| platform_set_drvdata(pdev, NULL); |
| kfree(rtc_dd); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int pm8xxx_rtc_resume(struct device *dev) |
| { |
| struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(rtc_dd->rtc_alarm_irq); |
| |
| return 0; |
| } |
| |
| static int pm8xxx_rtc_suspend(struct device *dev) |
| { |
| struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| enable_irq_wake(rtc_dd->rtc_alarm_irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(pm8xxx_rtc_pm_ops, pm8xxx_rtc_suspend, pm8xxx_rtc_resume); |
| |
| static void pm8xxx_rtc_shutdown(struct platform_device *pdev) |
| { |
| u8 value[4] = {0, 0, 0, 0}; |
| u8 reg; |
| int rc; |
| unsigned long irq_flags; |
| bool rtc_alarm_powerup = false; |
| struct pm8xxx_rtc *rtc_dd = platform_get_drvdata(pdev); |
| struct pm8xxx_rtc_platform_data *pdata = pdev->dev.platform_data; |
| |
| if (pdata != NULL) |
| rtc_alarm_powerup = pdata->rtc_alarm_powerup; |
| |
| if (!rtc_alarm_powerup) { |
| |
| spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags); |
| dev_dbg(&pdev->dev, "Disabling alarm interrupts\n"); |
| |
| /* Disable RTC alarms */ |
| reg = rtc_dd->ctrl_reg; |
| reg &= ~PM8xxx_RTC_ALARM_ENABLE; |
| rc = pm8xxx_write_wrapper(rtc_dd, ®, rtc_dd->rtc_base, 1); |
| if (rc < 0) { |
| dev_err(rtc_dd->rtc_dev, "Disabling alarm failed\n"); |
| goto fail_alarm_disable; |
| } |
| |
| /* Clear Alarm register */ |
| rc = pm8xxx_write_wrapper(rtc_dd, value, |
| rtc_dd->alarm_rw_base, NUM_8_BIT_RTC_REGS); |
| if (rc < 0) |
| dev_err(rtc_dd->rtc_dev, "Clearing alarm failed\n"); |
| |
| fail_alarm_disable: |
| spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags); |
| } |
| } |
| |
| static struct platform_driver pm8xxx_rtc_driver = { |
| .probe = pm8xxx_rtc_probe, |
| .remove = __devexit_p(pm8xxx_rtc_remove), |
| .shutdown = pm8xxx_rtc_shutdown, |
| .driver = { |
| .name = PM8XXX_RTC_DEV_NAME, |
| .owner = THIS_MODULE, |
| .pm = &pm8xxx_rtc_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(pm8xxx_rtc_driver); |
| |
| MODULE_ALIAS("platform:rtc-pm8xxx"); |
| MODULE_DESCRIPTION("PMIC8xxx RTC driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Anirudh Ghayal <aghayal@codeaurora.org>"); |