| /* |
| * Block driver for media (i.e., flash cards) |
| * |
| * Copyright 2002 Hewlett-Packard Company |
| * Copyright 2005-2008 Pierre Ossman |
| * |
| * Use consistent with the GNU GPL is permitted, |
| * provided that this copyright notice is |
| * preserved in its entirety in all copies and derived works. |
| * |
| * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, |
| * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS |
| * FITNESS FOR ANY PARTICULAR PURPOSE. |
| * |
| * Many thanks to Alessandro Rubini and Jonathan Corbet! |
| * |
| * Author: Andrew Christian |
| * 28 May 2002 |
| */ |
| #include <linux/moduleparam.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/errno.h> |
| #include <linux/hdreg.h> |
| #include <linux/kdev_t.h> |
| #include <linux/blkdev.h> |
| #include <linux/mutex.h> |
| #include <linux/scatterlist.h> |
| #include <linux/string_helpers.h> |
| |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/sd.h> |
| |
| #include <asm/system.h> |
| #include <asm/uaccess.h> |
| |
| #include "queue.h" |
| |
| /* |
| * max 8 partitions per card |
| */ |
| #define MMC_SHIFT 3 |
| #define MMC_NUM_MINORS (256 >> MMC_SHIFT) |
| |
| static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS); |
| |
| /* |
| * There is one mmc_blk_data per slot. |
| */ |
| struct mmc_blk_data { |
| spinlock_t lock; |
| struct gendisk *disk; |
| struct mmc_queue queue; |
| |
| unsigned int usage; |
| unsigned int read_only; |
| }; |
| |
| static DEFINE_MUTEX(open_lock); |
| |
| static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) |
| { |
| struct mmc_blk_data *md; |
| |
| mutex_lock(&open_lock); |
| md = disk->private_data; |
| if (md && md->usage == 0) |
| md = NULL; |
| if (md) |
| md->usage++; |
| mutex_unlock(&open_lock); |
| |
| return md; |
| } |
| |
| static void mmc_blk_put(struct mmc_blk_data *md) |
| { |
| mutex_lock(&open_lock); |
| md->usage--; |
| if (md->usage == 0) { |
| int devidx = MINOR(disk_devt(md->disk)) >> MMC_SHIFT; |
| __clear_bit(devidx, dev_use); |
| |
| put_disk(md->disk); |
| kfree(md); |
| } |
| mutex_unlock(&open_lock); |
| } |
| |
| static int mmc_blk_open(struct block_device *bdev, fmode_t mode) |
| { |
| struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk); |
| int ret = -ENXIO; |
| |
| if (md) { |
| if (md->usage == 2) |
| check_disk_change(bdev); |
| ret = 0; |
| |
| if ((mode & FMODE_WRITE) && md->read_only) { |
| mmc_blk_put(md); |
| ret = -EROFS; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int mmc_blk_release(struct gendisk *disk, fmode_t mode) |
| { |
| struct mmc_blk_data *md = disk->private_data; |
| |
| mmc_blk_put(md); |
| return 0; |
| } |
| |
| static int |
| mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
| { |
| geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16); |
| geo->heads = 4; |
| geo->sectors = 16; |
| return 0; |
| } |
| |
| static struct block_device_operations mmc_bdops = { |
| .open = mmc_blk_open, |
| .release = mmc_blk_release, |
| .getgeo = mmc_blk_getgeo, |
| .owner = THIS_MODULE, |
| }; |
| |
| struct mmc_blk_request { |
| struct mmc_request mrq; |
| struct mmc_command cmd; |
| struct mmc_command stop; |
| struct mmc_data data; |
| }; |
| |
| static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) |
| { |
| int err; |
| __be32 blocks; |
| |
| struct mmc_request mrq; |
| struct mmc_command cmd; |
| struct mmc_data data; |
| unsigned int timeout_us; |
| |
| struct scatterlist sg; |
| |
| memset(&cmd, 0, sizeof(struct mmc_command)); |
| |
| cmd.opcode = MMC_APP_CMD; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; |
| |
| err = mmc_wait_for_cmd(card->host, &cmd, 0); |
| if (err) |
| return (u32)-1; |
| if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD)) |
| return (u32)-1; |
| |
| memset(&cmd, 0, sizeof(struct mmc_command)); |
| |
| cmd.opcode = SD_APP_SEND_NUM_WR_BLKS; |
| cmd.arg = 0; |
| cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; |
| |
| memset(&data, 0, sizeof(struct mmc_data)); |
| |
| data.timeout_ns = card->csd.tacc_ns * 100; |
| data.timeout_clks = card->csd.tacc_clks * 100; |
| |
| timeout_us = data.timeout_ns / 1000; |
| timeout_us += data.timeout_clks * 1000 / |
| (card->host->ios.clock / 1000); |
| |
| if (timeout_us > 100000) { |
| data.timeout_ns = 100000000; |
| data.timeout_clks = 0; |
| } |
| |
| data.blksz = 4; |
| data.blocks = 1; |
| data.flags = MMC_DATA_READ; |
| data.sg = &sg; |
| data.sg_len = 1; |
| |
| memset(&mrq, 0, sizeof(struct mmc_request)); |
| |
| mrq.cmd = &cmd; |
| mrq.data = &data; |
| |
| sg_init_one(&sg, &blocks, 4); |
| |
| mmc_wait_for_req(card->host, &mrq); |
| |
| if (cmd.error || data.error) |
| return (u32)-1; |
| |
| return ntohl(blocks); |
| } |
| |
| static u32 get_card_status(struct mmc_card *card, struct request *req) |
| { |
| struct mmc_command cmd; |
| int err; |
| |
| memset(&cmd, 0, sizeof(struct mmc_command)); |
| cmd.opcode = MMC_SEND_STATUS; |
| if (!mmc_host_is_spi(card->host)) |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; |
| err = mmc_wait_for_cmd(card->host, &cmd, 0); |
| if (err) |
| printk(KERN_ERR "%s: error %d sending status comand", |
| req->rq_disk->disk_name, err); |
| return cmd.resp[0]; |
| } |
| |
| static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) |
| { |
| struct mmc_blk_data *md = mq->data; |
| struct mmc_card *card = md->queue.card; |
| struct mmc_blk_request brq; |
| int ret = 1, disable_multi = 0; |
| |
| mmc_claim_host(card->host); |
| |
| do { |
| struct mmc_command cmd; |
| u32 readcmd, writecmd, status = 0; |
| |
| memset(&brq, 0, sizeof(struct mmc_blk_request)); |
| brq.mrq.cmd = &brq.cmd; |
| brq.mrq.data = &brq.data; |
| |
| brq.cmd.arg = req->sector; |
| if (!mmc_card_blockaddr(card)) |
| brq.cmd.arg <<= 9; |
| brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; |
| brq.data.blksz = 512; |
| brq.stop.opcode = MMC_STOP_TRANSMISSION; |
| brq.stop.arg = 0; |
| brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC; |
| brq.data.blocks = req->nr_sectors; |
| |
| /* |
| * After a read error, we redo the request one sector at a time |
| * in order to accurately determine which sectors can be read |
| * successfully. |
| */ |
| if (disable_multi && brq.data.blocks > 1) |
| brq.data.blocks = 1; |
| |
| if (brq.data.blocks > 1) { |
| /* SPI multiblock writes terminate using a special |
| * token, not a STOP_TRANSMISSION request. |
| */ |
| if (!mmc_host_is_spi(card->host) |
| || rq_data_dir(req) == READ) |
| brq.mrq.stop = &brq.stop; |
| readcmd = MMC_READ_MULTIPLE_BLOCK; |
| writecmd = MMC_WRITE_MULTIPLE_BLOCK; |
| } else { |
| brq.mrq.stop = NULL; |
| readcmd = MMC_READ_SINGLE_BLOCK; |
| writecmd = MMC_WRITE_BLOCK; |
| } |
| |
| if (rq_data_dir(req) == READ) { |
| brq.cmd.opcode = readcmd; |
| brq.data.flags |= MMC_DATA_READ; |
| } else { |
| brq.cmd.opcode = writecmd; |
| brq.data.flags |= MMC_DATA_WRITE; |
| } |
| |
| mmc_set_data_timeout(&brq.data, card); |
| |
| brq.data.sg = mq->sg; |
| brq.data.sg_len = mmc_queue_map_sg(mq); |
| |
| /* |
| * Adjust the sg list so it is the same size as the |
| * request. |
| */ |
| if (brq.data.blocks != req->nr_sectors) { |
| int i, data_size = brq.data.blocks << 9; |
| struct scatterlist *sg; |
| |
| for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { |
| data_size -= sg->length; |
| if (data_size <= 0) { |
| sg->length += data_size; |
| i++; |
| break; |
| } |
| } |
| brq.data.sg_len = i; |
| } |
| |
| mmc_queue_bounce_pre(mq); |
| |
| mmc_wait_for_req(card->host, &brq.mrq); |
| |
| mmc_queue_bounce_post(mq); |
| |
| /* |
| * Check for errors here, but don't jump to cmd_err |
| * until later as we need to wait for the card to leave |
| * programming mode even when things go wrong. |
| */ |
| if (brq.cmd.error || brq.data.error || brq.stop.error) { |
| if (brq.data.blocks > 1 && rq_data_dir(req) == READ) { |
| /* Redo read one sector at a time */ |
| printk(KERN_WARNING "%s: retrying using single " |
| "block read\n", req->rq_disk->disk_name); |
| disable_multi = 1; |
| continue; |
| } |
| status = get_card_status(card, req); |
| } |
| |
| if (brq.cmd.error) { |
| printk(KERN_ERR "%s: error %d sending read/write " |
| "command, response %#x, card status %#x\n", |
| req->rq_disk->disk_name, brq.cmd.error, |
| brq.cmd.resp[0], status); |
| } |
| |
| if (brq.data.error) { |
| if (brq.data.error == -ETIMEDOUT && brq.mrq.stop) |
| /* 'Stop' response contains card status */ |
| status = brq.mrq.stop->resp[0]; |
| printk(KERN_ERR "%s: error %d transferring data," |
| " sector %u, nr %u, card status %#x\n", |
| req->rq_disk->disk_name, brq.data.error, |
| (unsigned)req->sector, |
| (unsigned)req->nr_sectors, status); |
| } |
| |
| if (brq.stop.error) { |
| printk(KERN_ERR "%s: error %d sending stop command, " |
| "response %#x, card status %#x\n", |
| req->rq_disk->disk_name, brq.stop.error, |
| brq.stop.resp[0], status); |
| } |
| |
| if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { |
| do { |
| int err; |
| |
| cmd.opcode = MMC_SEND_STATUS; |
| cmd.arg = card->rca << 16; |
| cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; |
| err = mmc_wait_for_cmd(card->host, &cmd, 5); |
| if (err) { |
| printk(KERN_ERR "%s: error %d requesting status\n", |
| req->rq_disk->disk_name, err); |
| goto cmd_err; |
| } |
| /* |
| * Some cards mishandle the status bits, |
| * so make sure to check both the busy |
| * indication and the card state. |
| */ |
| } while (!(cmd.resp[0] & R1_READY_FOR_DATA) || |
| (R1_CURRENT_STATE(cmd.resp[0]) == 7)); |
| |
| #if 0 |
| if (cmd.resp[0] & ~0x00000900) |
| printk(KERN_ERR "%s: status = %08x\n", |
| req->rq_disk->disk_name, cmd.resp[0]); |
| if (mmc_decode_status(cmd.resp)) |
| goto cmd_err; |
| #endif |
| } |
| |
| if (brq.cmd.error || brq.stop.error || brq.data.error) { |
| if (rq_data_dir(req) == READ) { |
| /* |
| * After an error, we redo I/O one sector at a |
| * time, so we only reach here after trying to |
| * read a single sector. |
| */ |
| spin_lock_irq(&md->lock); |
| ret = __blk_end_request(req, -EIO, brq.data.blksz); |
| spin_unlock_irq(&md->lock); |
| continue; |
| } |
| goto cmd_err; |
| } |
| |
| /* |
| * A block was successfully transferred. |
| */ |
| spin_lock_irq(&md->lock); |
| ret = __blk_end_request(req, 0, brq.data.bytes_xfered); |
| spin_unlock_irq(&md->lock); |
| } while (ret); |
| |
| mmc_release_host(card->host); |
| |
| return 1; |
| |
| cmd_err: |
| /* |
| * If this is an SD card and we're writing, we can first |
| * mark the known good sectors as ok. |
| * |
| * If the card is not SD, we can still ok written sectors |
| * as reported by the controller (which might be less than |
| * the real number of written sectors, but never more). |
| */ |
| if (mmc_card_sd(card)) { |
| u32 blocks; |
| |
| blocks = mmc_sd_num_wr_blocks(card); |
| if (blocks != (u32)-1) { |
| spin_lock_irq(&md->lock); |
| ret = __blk_end_request(req, 0, blocks << 9); |
| spin_unlock_irq(&md->lock); |
| } |
| } else { |
| spin_lock_irq(&md->lock); |
| ret = __blk_end_request(req, 0, brq.data.bytes_xfered); |
| spin_unlock_irq(&md->lock); |
| } |
| |
| mmc_release_host(card->host); |
| |
| spin_lock_irq(&md->lock); |
| while (ret) |
| ret = __blk_end_request(req, -EIO, blk_rq_cur_bytes(req)); |
| spin_unlock_irq(&md->lock); |
| |
| return 0; |
| } |
| |
| |
| static inline int mmc_blk_readonly(struct mmc_card *card) |
| { |
| return mmc_card_readonly(card) || |
| !(card->csd.cmdclass & CCC_BLOCK_WRITE); |
| } |
| |
| static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md; |
| int devidx, ret; |
| |
| devidx = find_first_zero_bit(dev_use, MMC_NUM_MINORS); |
| if (devidx >= MMC_NUM_MINORS) |
| return ERR_PTR(-ENOSPC); |
| __set_bit(devidx, dev_use); |
| |
| md = kzalloc(sizeof(struct mmc_blk_data), GFP_KERNEL); |
| if (!md) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| |
| /* |
| * Set the read-only status based on the supported commands |
| * and the write protect switch. |
| */ |
| md->read_only = mmc_blk_readonly(card); |
| |
| md->disk = alloc_disk(1 << MMC_SHIFT); |
| if (md->disk == NULL) { |
| ret = -ENOMEM; |
| goto err_kfree; |
| } |
| |
| spin_lock_init(&md->lock); |
| md->usage = 1; |
| |
| ret = mmc_init_queue(&md->queue, card, &md->lock); |
| if (ret) |
| goto err_putdisk; |
| |
| md->queue.issue_fn = mmc_blk_issue_rq; |
| md->queue.data = md; |
| |
| md->disk->major = MMC_BLOCK_MAJOR; |
| md->disk->first_minor = devidx << MMC_SHIFT; |
| md->disk->fops = &mmc_bdops; |
| md->disk->private_data = md; |
| md->disk->queue = md->queue.queue; |
| md->disk->driverfs_dev = &card->dev; |
| |
| /* |
| * As discussed on lkml, GENHD_FL_REMOVABLE should: |
| * |
| * - be set for removable media with permanent block devices |
| * - be unset for removable block devices with permanent media |
| * |
| * Since MMC block devices clearly fall under the second |
| * case, we do not set GENHD_FL_REMOVABLE. Userspace |
| * should use the block device creation/destruction hotplug |
| * messages to tell when the card is present. |
| */ |
| |
| sprintf(md->disk->disk_name, "mmcblk%d", devidx); |
| |
| blk_queue_hardsect_size(md->queue.queue, 512); |
| |
| if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) { |
| /* |
| * The EXT_CSD sector count is in number or 512 byte |
| * sectors. |
| */ |
| set_capacity(md->disk, card->ext_csd.sectors); |
| } else { |
| /* |
| * The CSD capacity field is in units of read_blkbits. |
| * set_capacity takes units of 512 bytes. |
| */ |
| set_capacity(md->disk, |
| card->csd.capacity << (card->csd.read_blkbits - 9)); |
| } |
| return md; |
| |
| err_putdisk: |
| put_disk(md->disk); |
| err_kfree: |
| kfree(md); |
| out: |
| return ERR_PTR(ret); |
| } |
| |
| static int |
| mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card) |
| { |
| struct mmc_command cmd; |
| int err; |
| |
| /* Block-addressed cards ignore MMC_SET_BLOCKLEN. */ |
| if (mmc_card_blockaddr(card)) |
| return 0; |
| |
| mmc_claim_host(card->host); |
| cmd.opcode = MMC_SET_BLOCKLEN; |
| cmd.arg = 512; |
| cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; |
| err = mmc_wait_for_cmd(card->host, &cmd, 5); |
| mmc_release_host(card->host); |
| |
| if (err) { |
| printk(KERN_ERR "%s: unable to set block size to %d: %d\n", |
| md->disk->disk_name, cmd.arg, err); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int mmc_blk_probe(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md; |
| int err; |
| |
| char cap_str[10]; |
| |
| /* |
| * Check that the card supports the command class(es) we need. |
| */ |
| if (!(card->csd.cmdclass & CCC_BLOCK_READ)) |
| return -ENODEV; |
| |
| md = mmc_blk_alloc(card); |
| if (IS_ERR(md)) |
| return PTR_ERR(md); |
| |
| err = mmc_blk_set_blksize(md, card); |
| if (err) |
| goto out; |
| |
| string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2, |
| cap_str, sizeof(cap_str)); |
| printk(KERN_INFO "%s: %s %s %s %s\n", |
| md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), |
| cap_str, md->read_only ? "(ro)" : ""); |
| |
| mmc_set_drvdata(card, md); |
| add_disk(md->disk); |
| return 0; |
| |
| out: |
| mmc_blk_put(md); |
| |
| return err; |
| } |
| |
| static void mmc_blk_remove(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md = mmc_get_drvdata(card); |
| |
| if (md) { |
| /* Stop new requests from getting into the queue */ |
| del_gendisk(md->disk); |
| |
| /* Then flush out any already in there */ |
| mmc_cleanup_queue(&md->queue); |
| |
| mmc_blk_put(md); |
| } |
| mmc_set_drvdata(card, NULL); |
| } |
| |
| #ifdef CONFIG_PM |
| static int mmc_blk_suspend(struct mmc_card *card, pm_message_t state) |
| { |
| struct mmc_blk_data *md = mmc_get_drvdata(card); |
| |
| if (md) { |
| mmc_queue_suspend(&md->queue); |
| } |
| return 0; |
| } |
| |
| static int mmc_blk_resume(struct mmc_card *card) |
| { |
| struct mmc_blk_data *md = mmc_get_drvdata(card); |
| |
| if (md) { |
| mmc_blk_set_blksize(md, card); |
| mmc_queue_resume(&md->queue); |
| } |
| return 0; |
| } |
| #else |
| #define mmc_blk_suspend NULL |
| #define mmc_blk_resume NULL |
| #endif |
| |
| static struct mmc_driver mmc_driver = { |
| .drv = { |
| .name = "mmcblk", |
| }, |
| .probe = mmc_blk_probe, |
| .remove = mmc_blk_remove, |
| .suspend = mmc_blk_suspend, |
| .resume = mmc_blk_resume, |
| }; |
| |
| static int __init mmc_blk_init(void) |
| { |
| int res; |
| |
| res = register_blkdev(MMC_BLOCK_MAJOR, "mmc"); |
| if (res) |
| goto out; |
| |
| res = mmc_register_driver(&mmc_driver); |
| if (res) |
| goto out2; |
| |
| return 0; |
| out2: |
| unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); |
| out: |
| return res; |
| } |
| |
| static void __exit mmc_blk_exit(void) |
| { |
| mmc_unregister_driver(&mmc_driver); |
| unregister_blkdev(MMC_BLOCK_MAJOR, "mmc"); |
| } |
| |
| module_init(mmc_blk_init); |
| module_exit(mmc_blk_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver"); |
| |