| /* |
| * builtin-record.c |
| * |
| * Builtin record command: Record the profile of a workload |
| * (or a CPU, or a PID) into the perf.data output file - for |
| * later analysis via perf report. |
| */ |
| #include "builtin.h" |
| |
| #include "perf.h" |
| |
| #include "util/util.h" |
| #include "util/parse-options.h" |
| #include "util/parse-events.h" |
| #include "util/string.h" |
| |
| #include "util/header.h" |
| #include "util/event.h" |
| #include "util/debug.h" |
| #include "util/trace-event.h" |
| |
| #include <unistd.h> |
| #include <sched.h> |
| |
| #define ALIGN(x, a) __ALIGN_MASK(x, (typeof(x))(a)-1) |
| #define __ALIGN_MASK(x, mask) (((x)+(mask))&~(mask)) |
| |
| static int fd[MAX_NR_CPUS][MAX_COUNTERS]; |
| |
| static long default_interval = 100000; |
| |
| static int nr_cpus = 0; |
| static unsigned int page_size; |
| static unsigned int mmap_pages = 128; |
| static int freq = 0; |
| static int output; |
| static const char *output_name = "perf.data"; |
| static int group = 0; |
| static unsigned int realtime_prio = 0; |
| static int raw_samples = 0; |
| static int system_wide = 0; |
| static int profile_cpu = -1; |
| static pid_t target_pid = -1; |
| static pid_t child_pid = -1; |
| static int inherit = 1; |
| static int force = 0; |
| static int append_file = 0; |
| static int call_graph = 0; |
| static int inherit_stat = 0; |
| static int no_samples = 0; |
| static int sample_address = 0; |
| static int multiplex = 0; |
| static int multiplex_fd = -1; |
| |
| static long samples; |
| static struct timeval last_read; |
| static struct timeval this_read; |
| |
| static u64 bytes_written; |
| |
| static struct pollfd event_array[MAX_NR_CPUS * MAX_COUNTERS]; |
| |
| static int nr_poll; |
| static int nr_cpu; |
| |
| static int file_new = 1; |
| |
| struct perf_header *header; |
| |
| struct mmap_data { |
| int counter; |
| void *base; |
| unsigned int mask; |
| unsigned int prev; |
| }; |
| |
| static struct mmap_data mmap_array[MAX_NR_CPUS][MAX_COUNTERS]; |
| |
| static unsigned long mmap_read_head(struct mmap_data *md) |
| { |
| struct perf_event_mmap_page *pc = md->base; |
| long head; |
| |
| head = pc->data_head; |
| rmb(); |
| |
| return head; |
| } |
| |
| static void mmap_write_tail(struct mmap_data *md, unsigned long tail) |
| { |
| struct perf_event_mmap_page *pc = md->base; |
| |
| /* |
| * ensure all reads are done before we write the tail out. |
| */ |
| /* mb(); */ |
| pc->data_tail = tail; |
| } |
| |
| static void write_output(void *buf, size_t size) |
| { |
| while (size) { |
| int ret = write(output, buf, size); |
| |
| if (ret < 0) |
| die("failed to write"); |
| |
| size -= ret; |
| buf += ret; |
| |
| bytes_written += ret; |
| } |
| } |
| |
| static void mmap_read(struct mmap_data *md) |
| { |
| unsigned int head = mmap_read_head(md); |
| unsigned int old = md->prev; |
| unsigned char *data = md->base + page_size; |
| unsigned long size; |
| void *buf; |
| int diff; |
| |
| gettimeofday(&this_read, NULL); |
| |
| /* |
| * If we're further behind than half the buffer, there's a chance |
| * the writer will bite our tail and mess up the samples under us. |
| * |
| * If we somehow ended up ahead of the head, we got messed up. |
| * |
| * In either case, truncate and restart at head. |
| */ |
| diff = head - old; |
| if (diff < 0) { |
| struct timeval iv; |
| unsigned long msecs; |
| |
| timersub(&this_read, &last_read, &iv); |
| msecs = iv.tv_sec*1000 + iv.tv_usec/1000; |
| |
| fprintf(stderr, "WARNING: failed to keep up with mmap data." |
| " Last read %lu msecs ago.\n", msecs); |
| |
| /* |
| * head points to a known good entry, start there. |
| */ |
| old = head; |
| } |
| |
| last_read = this_read; |
| |
| if (old != head) |
| samples++; |
| |
| size = head - old; |
| |
| if ((old & md->mask) + size != (head & md->mask)) { |
| buf = &data[old & md->mask]; |
| size = md->mask + 1 - (old & md->mask); |
| old += size; |
| |
| write_output(buf, size); |
| } |
| |
| buf = &data[old & md->mask]; |
| size = head - old; |
| old += size; |
| |
| write_output(buf, size); |
| |
| md->prev = old; |
| mmap_write_tail(md, old); |
| } |
| |
| static volatile int done = 0; |
| static volatile int signr = -1; |
| |
| static void sig_handler(int sig) |
| { |
| done = 1; |
| signr = sig; |
| } |
| |
| static void sig_atexit(void) |
| { |
| if (child_pid != -1) |
| kill(child_pid, SIGTERM); |
| |
| if (signr == -1) |
| return; |
| |
| signal(signr, SIG_DFL); |
| kill(getpid(), signr); |
| } |
| |
| static pid_t pid_synthesize_comm_event(pid_t pid, int full) |
| { |
| struct comm_event comm_ev; |
| char filename[PATH_MAX]; |
| char bf[BUFSIZ]; |
| FILE *fp; |
| size_t size = 0; |
| DIR *tasks; |
| struct dirent dirent, *next; |
| pid_t tgid = 0; |
| |
| snprintf(filename, sizeof(filename), "/proc/%d/status", pid); |
| |
| fp = fopen(filename, "r"); |
| if (fp == NULL) { |
| /* |
| * We raced with a task exiting - just return: |
| */ |
| if (verbose) |
| fprintf(stderr, "couldn't open %s\n", filename); |
| return 0; |
| } |
| |
| memset(&comm_ev, 0, sizeof(comm_ev)); |
| while (!comm_ev.comm[0] || !comm_ev.pid) { |
| if (fgets(bf, sizeof(bf), fp) == NULL) |
| goto out_failure; |
| |
| if (memcmp(bf, "Name:", 5) == 0) { |
| char *name = bf + 5; |
| while (*name && isspace(*name)) |
| ++name; |
| size = strlen(name) - 1; |
| memcpy(comm_ev.comm, name, size++); |
| } else if (memcmp(bf, "Tgid:", 5) == 0) { |
| char *tgids = bf + 5; |
| while (*tgids && isspace(*tgids)) |
| ++tgids; |
| tgid = comm_ev.pid = atoi(tgids); |
| } |
| } |
| |
| comm_ev.header.type = PERF_RECORD_COMM; |
| size = ALIGN(size, sizeof(u64)); |
| comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size); |
| |
| if (!full) { |
| comm_ev.tid = pid; |
| |
| write_output(&comm_ev, comm_ev.header.size); |
| goto out_fclose; |
| } |
| |
| snprintf(filename, sizeof(filename), "/proc/%d/task", pid); |
| |
| tasks = opendir(filename); |
| while (!readdir_r(tasks, &dirent, &next) && next) { |
| char *end; |
| pid = strtol(dirent.d_name, &end, 10); |
| if (*end) |
| continue; |
| |
| comm_ev.tid = pid; |
| |
| write_output(&comm_ev, comm_ev.header.size); |
| } |
| closedir(tasks); |
| |
| out_fclose: |
| fclose(fp); |
| return tgid; |
| |
| out_failure: |
| fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n", |
| filename); |
| exit(EXIT_FAILURE); |
| } |
| |
| static void pid_synthesize_mmap_samples(pid_t pid, pid_t tgid) |
| { |
| char filename[PATH_MAX]; |
| FILE *fp; |
| |
| snprintf(filename, sizeof(filename), "/proc/%d/maps", pid); |
| |
| fp = fopen(filename, "r"); |
| if (fp == NULL) { |
| /* |
| * We raced with a task exiting - just return: |
| */ |
| if (verbose) |
| fprintf(stderr, "couldn't open %s\n", filename); |
| return; |
| } |
| while (1) { |
| char bf[BUFSIZ], *pbf = bf; |
| struct mmap_event mmap_ev = { |
| .header = { .type = PERF_RECORD_MMAP }, |
| }; |
| int n; |
| size_t size; |
| if (fgets(bf, sizeof(bf), fp) == NULL) |
| break; |
| |
| /* 00400000-0040c000 r-xp 00000000 fd:01 41038 /bin/cat */ |
| n = hex2u64(pbf, &mmap_ev.start); |
| if (n < 0) |
| continue; |
| pbf += n + 1; |
| n = hex2u64(pbf, &mmap_ev.len); |
| if (n < 0) |
| continue; |
| pbf += n + 3; |
| if (*pbf == 'x') { /* vm_exec */ |
| char *execname = strchr(bf, '/'); |
| |
| /* Catch VDSO */ |
| if (execname == NULL) |
| execname = strstr(bf, "[vdso]"); |
| |
| if (execname == NULL) |
| continue; |
| |
| size = strlen(execname); |
| execname[size - 1] = '\0'; /* Remove \n */ |
| memcpy(mmap_ev.filename, execname, size); |
| size = ALIGN(size, sizeof(u64)); |
| mmap_ev.len -= mmap_ev.start; |
| mmap_ev.header.size = (sizeof(mmap_ev) - |
| (sizeof(mmap_ev.filename) - size)); |
| mmap_ev.pid = tgid; |
| mmap_ev.tid = pid; |
| |
| write_output(&mmap_ev, mmap_ev.header.size); |
| } |
| } |
| |
| fclose(fp); |
| } |
| |
| static void synthesize_all(void) |
| { |
| DIR *proc; |
| struct dirent dirent, *next; |
| |
| proc = opendir("/proc"); |
| |
| while (!readdir_r(proc, &dirent, &next) && next) { |
| char *end; |
| pid_t pid, tgid; |
| |
| pid = strtol(dirent.d_name, &end, 10); |
| if (*end) /* only interested in proper numerical dirents */ |
| continue; |
| |
| tgid = pid_synthesize_comm_event(pid, 1); |
| pid_synthesize_mmap_samples(pid, tgid); |
| } |
| |
| closedir(proc); |
| } |
| |
| static int group_fd; |
| |
| static struct perf_header_attr *get_header_attr(struct perf_event_attr *a, int nr) |
| { |
| struct perf_header_attr *h_attr; |
| |
| if (nr < header->attrs) { |
| h_attr = header->attr[nr]; |
| } else { |
| h_attr = perf_header_attr__new(a); |
| perf_header__add_attr(header, h_attr); |
| } |
| |
| return h_attr; |
| } |
| |
| static void create_counter(int counter, int cpu, pid_t pid) |
| { |
| struct perf_event_attr *attr = attrs + counter; |
| struct perf_header_attr *h_attr; |
| int track = !counter; /* only the first counter needs these */ |
| struct { |
| u64 count; |
| u64 time_enabled; |
| u64 time_running; |
| u64 id; |
| } read_data; |
| |
| attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | |
| PERF_FORMAT_TOTAL_TIME_RUNNING | |
| PERF_FORMAT_ID; |
| |
| attr->sample_type |= PERF_SAMPLE_IP | PERF_SAMPLE_TID; |
| |
| if (freq) { |
| attr->sample_type |= PERF_SAMPLE_PERIOD; |
| attr->freq = 1; |
| attr->sample_freq = freq; |
| } |
| |
| if (no_samples) |
| attr->sample_freq = 0; |
| |
| if (inherit_stat) |
| attr->inherit_stat = 1; |
| |
| if (sample_address) |
| attr->sample_type |= PERF_SAMPLE_ADDR; |
| |
| if (call_graph) |
| attr->sample_type |= PERF_SAMPLE_CALLCHAIN; |
| |
| if (raw_samples) { |
| attr->sample_type |= PERF_SAMPLE_TIME; |
| attr->sample_type |= PERF_SAMPLE_RAW; |
| attr->sample_type |= PERF_SAMPLE_CPU; |
| } |
| |
| attr->mmap = track; |
| attr->comm = track; |
| attr->inherit = (cpu < 0) && inherit; |
| attr->disabled = 1; |
| |
| try_again: |
| fd[nr_cpu][counter] = sys_perf_event_open(attr, pid, cpu, group_fd, 0); |
| |
| if (fd[nr_cpu][counter] < 0) { |
| int err = errno; |
| |
| if (err == EPERM) |
| die("Permission error - are you root?\n"); |
| else if (err == ENODEV && profile_cpu != -1) |
| die("No such device - did you specify an out-of-range profile CPU?\n"); |
| |
| /* |
| * If it's cycles then fall back to hrtimer |
| * based cpu-clock-tick sw counter, which |
| * is always available even if no PMU support: |
| */ |
| if (attr->type == PERF_TYPE_HARDWARE |
| && attr->config == PERF_COUNT_HW_CPU_CYCLES) { |
| |
| if (verbose) |
| warning(" ... trying to fall back to cpu-clock-ticks\n"); |
| attr->type = PERF_TYPE_SOFTWARE; |
| attr->config = PERF_COUNT_SW_CPU_CLOCK; |
| goto try_again; |
| } |
| printf("\n"); |
| error("perfcounter syscall returned with %d (%s)\n", |
| fd[nr_cpu][counter], strerror(err)); |
| die("No CONFIG_PERF_EVENTS=y kernel support configured?\n"); |
| exit(-1); |
| } |
| |
| h_attr = get_header_attr(attr, counter); |
| |
| if (!file_new) { |
| if (memcmp(&h_attr->attr, attr, sizeof(*attr))) { |
| fprintf(stderr, "incompatible append\n"); |
| exit(-1); |
| } |
| } |
| |
| if (read(fd[nr_cpu][counter], &read_data, sizeof(read_data)) == -1) { |
| perror("Unable to read perf file descriptor\n"); |
| exit(-1); |
| } |
| |
| perf_header_attr__add_id(h_attr, read_data.id); |
| |
| assert(fd[nr_cpu][counter] >= 0); |
| fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK); |
| |
| /* |
| * First counter acts as the group leader: |
| */ |
| if (group && group_fd == -1) |
| group_fd = fd[nr_cpu][counter]; |
| if (multiplex && multiplex_fd == -1) |
| multiplex_fd = fd[nr_cpu][counter]; |
| |
| if (multiplex && fd[nr_cpu][counter] != multiplex_fd) { |
| int ret; |
| |
| ret = ioctl(fd[nr_cpu][counter], PERF_EVENT_IOC_SET_OUTPUT, multiplex_fd); |
| assert(ret != -1); |
| } else { |
| event_array[nr_poll].fd = fd[nr_cpu][counter]; |
| event_array[nr_poll].events = POLLIN; |
| nr_poll++; |
| |
| mmap_array[nr_cpu][counter].counter = counter; |
| mmap_array[nr_cpu][counter].prev = 0; |
| mmap_array[nr_cpu][counter].mask = mmap_pages*page_size - 1; |
| mmap_array[nr_cpu][counter].base = mmap(NULL, (mmap_pages+1)*page_size, |
| PROT_READ|PROT_WRITE, MAP_SHARED, fd[nr_cpu][counter], 0); |
| if (mmap_array[nr_cpu][counter].base == MAP_FAILED) { |
| error("failed to mmap with %d (%s)\n", errno, strerror(errno)); |
| exit(-1); |
| } |
| } |
| |
| ioctl(fd[nr_cpu][counter], PERF_EVENT_IOC_ENABLE); |
| } |
| |
| static void open_counters(int cpu, pid_t pid) |
| { |
| int counter; |
| |
| group_fd = -1; |
| for (counter = 0; counter < nr_counters; counter++) |
| create_counter(counter, cpu, pid); |
| |
| nr_cpu++; |
| } |
| |
| static void atexit_header(void) |
| { |
| header->data_size += bytes_written; |
| |
| perf_header__write(header, output); |
| } |
| |
| static int __cmd_record(int argc, const char **argv) |
| { |
| int i, counter; |
| struct stat st; |
| pid_t pid = 0; |
| int flags; |
| int ret; |
| unsigned long waking = 0; |
| |
| page_size = sysconf(_SC_PAGE_SIZE); |
| nr_cpus = sysconf(_SC_NPROCESSORS_ONLN); |
| assert(nr_cpus <= MAX_NR_CPUS); |
| assert(nr_cpus >= 0); |
| |
| atexit(sig_atexit); |
| signal(SIGCHLD, sig_handler); |
| signal(SIGINT, sig_handler); |
| |
| if (!stat(output_name, &st) && st.st_size) { |
| if (!force && !append_file) { |
| fprintf(stderr, "Error, output file %s exists, use -A to append or -f to overwrite.\n", |
| output_name); |
| exit(-1); |
| } |
| } else { |
| append_file = 0; |
| } |
| |
| flags = O_CREAT|O_RDWR; |
| if (append_file) |
| file_new = 0; |
| else |
| flags |= O_TRUNC; |
| |
| output = open(output_name, flags, S_IRUSR|S_IWUSR); |
| if (output < 0) { |
| perror("failed to create output file"); |
| exit(-1); |
| } |
| |
| if (!file_new) |
| header = perf_header__read(output); |
| else |
| header = perf_header__new(); |
| |
| |
| if (raw_samples) { |
| read_tracing_data(attrs, nr_counters); |
| } else { |
| for (i = 0; i < nr_counters; i++) { |
| if (attrs[i].sample_type & PERF_SAMPLE_RAW) { |
| read_tracing_data(attrs, nr_counters); |
| break; |
| } |
| } |
| } |
| atexit(atexit_header); |
| |
| if (!system_wide) { |
| pid = target_pid; |
| if (pid == -1) |
| pid = getpid(); |
| |
| open_counters(profile_cpu, pid); |
| } else { |
| if (profile_cpu != -1) { |
| open_counters(profile_cpu, target_pid); |
| } else { |
| for (i = 0; i < nr_cpus; i++) |
| open_counters(i, target_pid); |
| } |
| } |
| |
| if (file_new) |
| perf_header__write(header, output); |
| |
| if (!system_wide) { |
| pid_t tgid = pid_synthesize_comm_event(pid, 0); |
| pid_synthesize_mmap_samples(pid, tgid); |
| } else |
| synthesize_all(); |
| |
| if (target_pid == -1 && argc) { |
| pid = fork(); |
| if (pid < 0) |
| perror("failed to fork"); |
| |
| if (!pid) { |
| if (execvp(argv[0], (char **)argv)) { |
| perror(argv[0]); |
| exit(-1); |
| } |
| } |
| |
| child_pid = pid; |
| } |
| |
| if (realtime_prio) { |
| struct sched_param param; |
| |
| param.sched_priority = realtime_prio; |
| if (sched_setscheduler(0, SCHED_FIFO, ¶m)) { |
| printf("Could not set realtime priority.\n"); |
| exit(-1); |
| } |
| } |
| |
| for (;;) { |
| int hits = samples; |
| |
| for (i = 0; i < nr_cpu; i++) { |
| for (counter = 0; counter < nr_counters; counter++) { |
| if (mmap_array[i][counter].base) |
| mmap_read(&mmap_array[i][counter]); |
| } |
| } |
| |
| if (hits == samples) { |
| if (done) |
| break; |
| ret = poll(event_array, nr_poll, -1); |
| waking++; |
| } |
| |
| if (done) { |
| for (i = 0; i < nr_cpu; i++) { |
| for (counter = 0; counter < nr_counters; counter++) |
| ioctl(fd[i][counter], PERF_EVENT_IOC_DISABLE); |
| } |
| } |
| } |
| |
| fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking); |
| |
| /* |
| * Approximate RIP event size: 24 bytes. |
| */ |
| fprintf(stderr, |
| "[ perf record: Captured and wrote %.3f MB %s (~%lld samples) ]\n", |
| (double)bytes_written / 1024.0 / 1024.0, |
| output_name, |
| bytes_written / 24); |
| |
| return 0; |
| } |
| |
| static const char * const record_usage[] = { |
| "perf record [<options>] [<command>]", |
| "perf record [<options>] -- <command> [<options>]", |
| NULL |
| }; |
| |
| static const struct option options[] = { |
| OPT_CALLBACK('e', "event", NULL, "event", |
| "event selector. use 'perf list' to list available events", |
| parse_events), |
| OPT_INTEGER('p', "pid", &target_pid, |
| "record events on existing pid"), |
| OPT_INTEGER('r', "realtime", &realtime_prio, |
| "collect data with this RT SCHED_FIFO priority"), |
| OPT_BOOLEAN('R', "raw-samples", &raw_samples, |
| "collect raw sample records from all opened counters"), |
| OPT_BOOLEAN('a', "all-cpus", &system_wide, |
| "system-wide collection from all CPUs"), |
| OPT_BOOLEAN('A', "append", &append_file, |
| "append to the output file to do incremental profiling"), |
| OPT_INTEGER('C', "profile_cpu", &profile_cpu, |
| "CPU to profile on"), |
| OPT_BOOLEAN('f', "force", &force, |
| "overwrite existing data file"), |
| OPT_LONG('c', "count", &default_interval, |
| "event period to sample"), |
| OPT_STRING('o', "output", &output_name, "file", |
| "output file name"), |
| OPT_BOOLEAN('i', "inherit", &inherit, |
| "child tasks inherit counters"), |
| OPT_INTEGER('F', "freq", &freq, |
| "profile at this frequency"), |
| OPT_INTEGER('m', "mmap-pages", &mmap_pages, |
| "number of mmap data pages"), |
| OPT_BOOLEAN('g', "call-graph", &call_graph, |
| "do call-graph (stack chain/backtrace) recording"), |
| OPT_BOOLEAN('v', "verbose", &verbose, |
| "be more verbose (show counter open errors, etc)"), |
| OPT_BOOLEAN('s', "stat", &inherit_stat, |
| "per thread counts"), |
| OPT_BOOLEAN('d', "data", &sample_address, |
| "Sample addresses"), |
| OPT_BOOLEAN('n', "no-samples", &no_samples, |
| "don't sample"), |
| OPT_BOOLEAN('M', "multiplex", &multiplex, |
| "multiplex counter output in a single channel"), |
| OPT_END() |
| }; |
| |
| int cmd_record(int argc, const char **argv, const char *prefix __used) |
| { |
| int counter; |
| |
| argc = parse_options(argc, argv, options, record_usage, |
| PARSE_OPT_STOP_AT_NON_OPTION); |
| if (!argc && target_pid == -1 && !system_wide) |
| usage_with_options(record_usage, options); |
| |
| if (!nr_counters) { |
| nr_counters = 1; |
| attrs[0].type = PERF_TYPE_HARDWARE; |
| attrs[0].config = PERF_COUNT_HW_CPU_CYCLES; |
| } |
| |
| for (counter = 0; counter < nr_counters; counter++) { |
| if (attrs[counter].sample_period) |
| continue; |
| |
| attrs[counter].sample_period = default_interval; |
| } |
| |
| return __cmd_record(argc, argv); |
| } |