| /* Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/irq.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/spinlock.h> |
| #include <linux/poll.h> |
| #include <linux/of_gpio.h> |
| #include <linux/clk.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/consumer.h> |
| #include "nfc-nci.h" |
| #include <mach/gpiomux.h> |
| |
| struct qca199x_platform_data { |
| unsigned int irq_gpio; |
| unsigned int dis_gpio; |
| unsigned int ven_gpio; |
| unsigned int reg; |
| const char *clk_src; |
| unsigned int clk_src_gpio; |
| }; |
| |
| static struct of_device_id msm_match_table[] = { |
| {.compatible = "qcom,nfc-nci"}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(of, msm_match_table); |
| |
| #define MAX_BUFFER_SIZE (780) |
| /* Read data */ |
| #define PACKET_HEADER_SIZE_NCI (4) |
| #define PACKET_TYPE_NCI (16) |
| #define MAX_PACKET_SIZE (PACKET_HEADER_SIZE_NCI + 255) |
| #define MAX_QCA_REG (116) |
| |
| static int nfc_i2c_write(struct i2c_client *client, u8 *buf, int len); |
| static int nfcc_initialise(struct i2c_client *client, unsigned short curr_addr); |
| |
| struct qca199x_dev { |
| wait_queue_head_t read_wq; |
| struct mutex read_mutex; |
| struct i2c_client *client; |
| struct miscdevice qca199x_device; |
| unsigned int irq_gpio; |
| unsigned int dis_gpio; |
| unsigned int ven_gpio; |
| bool irq_enabled; |
| spinlock_t irq_enabled_lock; |
| unsigned int count_irq; |
| enum nfcc_state state; |
| }; |
| |
| /* |
| * To allow filtering of nfc logging from user. This is set via |
| * IOCTL NFC_KERNEL_LOGGING_MODE. |
| */ |
| static int logging_level; |
| /* |
| * FTM-RAW-I2C RD/WR MODE |
| */ |
| static struct devicemode device_mode; |
| static int ftm_raw_write_mode; |
| static int ftm_werr_code; |
| |
| static void qca199x_init_stat(struct qca199x_dev *qca199x_dev) |
| { |
| qca199x_dev->count_irq = 0; |
| } |
| |
| static void qca199x_disable_irq(struct qca199x_dev *qca199x_dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&qca199x_dev->irq_enabled_lock, flags); |
| if (qca199x_dev->irq_enabled) { |
| disable_irq_nosync(qca199x_dev->client->irq); |
| qca199x_dev->irq_enabled = false; |
| } |
| spin_unlock_irqrestore(&qca199x_dev->irq_enabled_lock, flags); |
| } |
| |
| static void qca199x_enable_irq(struct qca199x_dev *qca199x_dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&qca199x_dev->irq_enabled_lock, flags); |
| if (!qca199x_dev->irq_enabled) { |
| qca199x_dev->irq_enabled = true; |
| enable_irq(qca199x_dev->client->irq); |
| } |
| spin_unlock_irqrestore(&qca199x_dev->irq_enabled_lock, flags); |
| } |
| |
| static irqreturn_t qca199x_dev_irq_handler(int irq, void *dev_id) |
| { |
| struct qca199x_dev *qca199x_dev = dev_id; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&qca199x_dev->irq_enabled_lock, flags); |
| qca199x_dev->count_irq++; |
| spin_unlock_irqrestore(&qca199x_dev->irq_enabled_lock, flags); |
| wake_up(&qca199x_dev->read_wq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static unsigned int nfc_poll(struct file *filp, poll_table *wait) |
| { |
| struct qca199x_dev *qca199x_dev = filp->private_data; |
| unsigned int mask = 0; |
| unsigned long flags; |
| |
| poll_wait(filp, &qca199x_dev->read_wq, wait); |
| |
| spin_lock_irqsave(&qca199x_dev->irq_enabled_lock, flags); |
| if (qca199x_dev->count_irq > 0) { |
| qca199x_dev->count_irq--; |
| mask |= POLLIN | POLLRDNORM; |
| } |
| spin_unlock_irqrestore(&qca199x_dev->irq_enabled_lock, flags); |
| |
| return mask; |
| } |
| |
| /* |
| * ONLY for FTM-RAW-I2C Mode |
| * Required to instigate a read, which comes from DT layer. This means we need |
| * to spoof an interrupt and send a wake up event. |
| */ |
| void ftm_raw_trigger_read(struct qca199x_dev *qca199x_dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&qca199x_dev->irq_enabled_lock, flags); |
| qca199x_dev->count_irq++; |
| spin_unlock_irqrestore(&qca199x_dev->irq_enabled_lock, flags); |
| wake_up(&qca199x_dev->read_wq); |
| } |
| |
| static ssize_t nfc_read(struct file *filp, char __user *buf, |
| size_t count, loff_t *offset) |
| { |
| struct qca199x_dev *qca199x_dev = filp->private_data; |
| unsigned char tmp[MAX_BUFFER_SIZE], rd_byte; |
| unsigned char len[PAYLOAD_HEADER_LENGTH]; |
| int total, length, ret; |
| int ftm_rerr_code; |
| enum ehandler_mode dmode; |
| |
| total = 0; |
| length = 0; |
| if (count > MAX_BUFFER_SIZE) |
| count = MAX_BUFFER_SIZE; |
| |
| mutex_lock(&qca199x_dev->read_mutex); |
| memset(tmp, 0, sizeof(tmp)); |
| memset(len, 0, sizeof(len)); |
| dmode = device_mode.handle_flavour; |
| /* FTM-RAW-I2C RD/WR MODE - Special Case */ |
| if ((dmode == UNSOLICITED_FTM_RAW_MODE) || |
| (dmode == SOLICITED_FTM_RAW_MODE)) { |
| /* READ */ |
| if ((ftm_raw_write_mode == 0) && (ftm_werr_code == 0)) { |
| ftm_rerr_code = i2c_master_recv(qca199x_dev->client, |
| &rd_byte, 1); |
| if (ftm_rerr_code == 0x1) |
| ftm_rerr_code = 0; |
| tmp[0] = (unsigned char)ftm_rerr_code; |
| tmp[1] = rd_byte; |
| total = 2; |
| ret = copy_to_user(buf, tmp, total); |
| } |
| /* WRITE */ |
| else if ((ftm_raw_write_mode == 1) || (ftm_werr_code != 0)) { |
| tmp[0] = (unsigned char)ftm_werr_code; |
| total = 1; |
| ret = copy_to_user(buf, tmp, total); |
| } else { |
| /* Invalid case */ |
| total = 0; |
| ret = copy_to_user(buf, tmp, total); |
| } |
| mutex_unlock(&qca199x_dev->read_mutex); |
| goto done; |
| } |
| |
| /* NORMAL NCI Behaviour */ |
| /* Read the header */ |
| ret = i2c_master_recv(qca199x_dev->client, len, PAYLOAD_HEADER_LENGTH); |
| if (ret != PAYLOAD_HEADER_LENGTH) { |
| total = 0; |
| goto err; |
| } |
| length = len[PAYLOAD_HEADER_LENGTH - 1]; |
| if (length == 0) |
| total = 0; |
| /** make sure full packet fits in the buffer **/ |
| if ((length > 0) && ((length + PAYLOAD_HEADER_LENGTH) <= count)) { |
| /* Read the packet */ |
| ret = i2c_master_recv(qca199x_dev->client, tmp, (length + |
| PAYLOAD_HEADER_LENGTH)); |
| if (ret < 0) { |
| total = 0; |
| goto err; |
| } |
| total = (length + PAYLOAD_HEADER_LENGTH); |
| } |
| |
| if (total > 0) { |
| if ((total > count) || copy_to_user(buf, tmp, total)) { |
| dev_err(&qca199x_dev->client->dev, |
| "failed to copy to user space, total = %d\n", |
| total); |
| total = -EFAULT; |
| } |
| } |
| mutex_unlock(&qca199x_dev->read_mutex); |
| err: |
| if (ret < 0) |
| mutex_unlock(&qca199x_dev->read_mutex); |
| done: |
| return total; |
| } |
| |
| static ssize_t nfc_write(struct file *filp, const char __user *buf, |
| size_t count, loff_t *offset) |
| { |
| struct qca199x_dev *qca199x_dev = filp->private_data; |
| char tmp[MAX_BUFFER_SIZE]; |
| int ret = 0; |
| enum ehandler_mode dmode; |
| |
| if (count > MAX_BUFFER_SIZE) { |
| dev_err(&qca199x_dev->client->dev, "out of memory\n"); |
| return -ENOMEM; |
| } |
| if (copy_from_user(tmp, buf, count)) { |
| dev_err(&qca199x_dev->client->dev, |
| "nfc-nci write: failed to copy from user space\n"); |
| return -EFAULT; |
| } |
| mutex_lock(&qca199x_dev->read_mutex); |
| dmode = device_mode.handle_flavour; |
| /* FTM-DIRECT-I2C RD/WR MODE */ |
| /* This is a special FTM-i2c mode case,where tester is not using NCI */ |
| if ((dmode == UNSOLICITED_FTM_RAW_MODE) || |
| (dmode == SOLICITED_FTM_RAW_MODE)) { |
| /* Read From Register */ |
| if (count == 1) { |
| ftm_raw_write_mode = 0; |
| ret = i2c_master_send(qca199x_dev->client, tmp, count); |
| if (ret == 1) |
| ftm_werr_code = 0; |
| else |
| ftm_werr_code = ret; |
| ftm_raw_trigger_read(qca199x_dev); |
| } |
| /* Write to Register */ |
| if (count == 2) { |
| ftm_raw_write_mode = 1; |
| ret = i2c_master_send(qca199x_dev->client, tmp, count); |
| if (ret == 2) |
| ftm_werr_code = 0; |
| else |
| ftm_werr_code = ret; |
| ftm_raw_trigger_read(qca199x_dev); |
| } |
| } else { |
| /* NORMAL NCI behaviour - NB : |
| We can be in FTM mode here also */ |
| ret = i2c_master_send(qca199x_dev->client, tmp, count); |
| } |
| if (ret != count) { |
| dev_err(&qca199x_dev->client->dev, |
| "NFC: failed to write %d\n", ret); |
| ret = -EIO; |
| } |
| mutex_unlock(&qca199x_dev->read_mutex); |
| |
| return ret; |
| } |
| |
| static int nfc_open(struct inode *inode, struct file *filp) |
| { |
| int ret = 0; |
| |
| struct qca199x_dev *qca199x_dev = container_of(filp->private_data, |
| struct qca199x_dev, |
| qca199x_device); |
| |
| filp->private_data = qca199x_dev; |
| qca199x_init_stat(qca199x_dev); |
| qca199x_enable_irq(qca199x_dev); |
| dev_dbg(&qca199x_dev->client->dev, |
| "%d,%d\n", imajor(inode), iminor(inode)); |
| return ret; |
| } |
| |
| /* |
| * Wake/Sleep Mode |
| */ |
| int nfcc_wake(int level, struct file *filp) |
| { |
| int r = 0; |
| unsigned char raw_nci_sleep[] = {0x2F, 0x03, 0x00}; |
| /* Change slave address to 0xE */ |
| unsigned char raw_nci_wake[] = {0x10, 0x0F}; |
| unsigned short slave_addr = 0xE; |
| unsigned short curr_addr; |
| struct qca199x_dev *qca199x_dev = filp->private_data; |
| |
| dev_dbg(&qca199x_dev->client->dev, "nfcc_wake: %s: info: %p\n", |
| __func__, qca199x_dev); |
| |
| if (level == NFCC_SLEEP) { |
| r = i2c_master_send(qca199x_dev->client, &raw_nci_sleep[0], |
| sizeof(raw_nci_sleep)); |
| |
| r = sizeof(raw_nci_sleep); |
| if (r != sizeof(raw_nci_sleep)) |
| return -EMSGSIZE; |
| qca199x_dev->state = NFCC_STATE_NORMAL_SLEEP; |
| } else { |
| curr_addr = qca199x_dev->client->addr; |
| qca199x_dev->client->addr = slave_addr; |
| r = nfc_i2c_write(qca199x_dev->client, &raw_nci_wake[0], |
| sizeof(raw_nci_wake)); |
| /* Restore original NFCC slave I2C address */ |
| qca199x_dev->client->addr = curr_addr; |
| r = sizeof(raw_nci_wake); |
| if (r != sizeof(raw_nci_wake)) |
| return -EMSGSIZE; |
| qca199x_dev->state = NFCC_STATE_NORMAL_WAKE; |
| } |
| |
| return r; |
| } |
| |
| /* |
| * Inside nfc_ioctl_power_states |
| * |
| * @brief ioctl functions |
| * |
| * |
| * Device control |
| * remove control via ioctl |
| * (arg = 0): NFC_DISABLE GPIO = 0 |
| * (arg = 1): NFC_DISABLE GPIO = 1 |
| * NOT USED (arg = 2): FW_DL GPIO = 0 |
| * NOT USED (arg = 3): FW_DL GPIO = 1 |
| * (arg = 4): NFCC_WAKE = 1 |
| * (arg = 5): NFCC_WAKE = 0 |
| * |
| * |
| */ |
| int nfc_ioctl_power_states(struct file *filp, unsigned int cmd, |
| unsigned long arg) |
| { |
| int r = 0; |
| struct qca199x_dev *qca199x_dev = filp->private_data; |
| |
| if (arg == 0) { |
| gpio_set_value(qca199x_dev->dis_gpio, 0); |
| r = gpio_direction_output(qca199x_dev->dis_gpio, 1); |
| if (r) { |
| dev_err(&qca199x_dev->client->dev, |
| "unable to set direction for gpio [%d]\n", |
| qca199x_dev->dis_gpio); |
| goto err_req; |
| } |
| gpio_set_value(qca199x_dev->dis_gpio, 0); |
| msleep(20); |
| } else if (arg == 1) { |
| gpio_set_value(qca199x_dev->dis_gpio, 0); |
| r = gpio_direction_output(qca199x_dev->dis_gpio, 1); |
| if (r) { |
| dev_err(&qca199x_dev->client->dev, |
| "unable to set direction for gpio [%d]\n", |
| qca199x_dev->dis_gpio); |
| goto err_req; |
| } |
| gpio_set_value(qca199x_dev->dis_gpio, 1); |
| usleep(1000); |
| } else if (arg == 2) { |
| mutex_lock(&qca199x_dev->read_mutex); |
| r = nfcc_initialise(qca199x_dev->client, 0xE); |
| mutex_unlock(&qca199x_dev->read_mutex); |
| if (r) { |
| dev_err(&qca199x_dev->client->dev, |
| "nfc-nci probe: request nfcc initialise failed\n"); |
| goto err_req; |
| } |
| } else if (arg == 3) { |
| msleep(20); |
| } else if (arg == 4) { |
| mutex_lock(&qca199x_dev->read_mutex); |
| nfcc_wake(NFCC_WAKE, filp); |
| mutex_unlock(&qca199x_dev->read_mutex); |
| } else if (arg == 5) { |
| nfcc_wake(NFCC_SLEEP, filp); |
| } else { |
| r = -ENOIOCTLCMD; |
| } |
| |
| err_req: |
| return r; |
| } |
| |
| /* |
| * Inside nfc_ioctl_nfcc_mode |
| * |
| * @brief nfc_ioctl_nfcc_mode |
| * |
| * (arg = 0) ; NORMAL_MODE - Standard mode, unsolicited read behaviour |
| * (arg = 1) ; SOLICITED_MODE - As above but reads are solicited from User Land |
| * (arg = 2) ; UNSOLICITED_FTM_RAW MODE - NORMAL_MODE but messages from FTM and |
| * not NCI Host. |
| * (arg = 2) ; SOLICITED_FTM_RAW_MODE - As SOLICITED_MODE but messages from FTM |
| * and not NCI Host. |
| * |
| * |
| * |
| */ |
| int nfc_ioctl_nfcc_mode(struct file *filp, unsigned int cmd, unsigned long arg) |
| { |
| int retval = 0; |
| |
| static unsigned short nci_addr; |
| struct qca199x_dev *qca199x_dev = filp->private_data; |
| struct qca199x_platform_data *platform_data; |
| |
| platform_data = qca199x_dev->client->dev.platform_data; |
| |
| if (arg == 0) { |
| device_mode.handle_flavour = UNSOLICITED_MODE; |
| qca199x_dev->client->addr = NCI_I2C_SLAVE; |
| /* enable interrupts again */ |
| qca199x_enable_irq(qca199x_dev); |
| } else if (arg == 1) { |
| device_mode.handle_flavour = SOLICITED_MODE; |
| qca199x_dev->client->addr = qca199x_dev->client->addr; |
| /* enable interrupts again */ |
| qca199x_enable_irq(qca199x_dev); |
| } else if (arg == 2) { |
| device_mode.handle_flavour = UNSOLICITED_FTM_RAW_MODE; |
| nci_addr = qca199x_dev->client->addr; |
| /* replace with new client slave address*/ |
| qca199x_dev->client->addr = 0xE; |
| /* We also need to disable interrupts */ |
| qca199x_disable_irq(qca199x_dev); |
| } else if (arg == 3) { |
| device_mode.handle_flavour = SOLICITED_FTM_RAW_MODE; |
| nci_addr = qca199x_dev->client->addr; |
| /* replace with new client slave address*/ |
| qca199x_dev->client->addr = 0xE; |
| /* We also need to disable interrupts */ |
| qca199x_disable_irq(qca199x_dev); |
| } else { |
| device_mode.handle_flavour = UNSOLICITED_MODE; |
| qca199x_dev->client->addr = NCI_I2C_SLAVE; |
| } |
| return retval; |
| } |
| |
| /* |
| * Inside nfc_ioctl_nfcc_version |
| * |
| * @brief nfc_ioctl_nfcc_version |
| * |
| * |
| */ |
| int nfc_ioctl_nfcc_version(struct file *filp, unsigned int cmd, |
| unsigned long arg) |
| { |
| int r = 0; |
| unsigned short slave_addr = 0xE; |
| unsigned short curr_addr; |
| |
| unsigned char raw_chip_version_addr = 0x00; |
| unsigned char raw_chip_rev_id_addr = 0x9C; |
| unsigned char raw_chip_version = 0xFF; |
| |
| struct qca199x_dev *qca199x_dev = filp->private_data; |
| struct qca199x_platform_data *platform_data; |
| |
| platform_data = qca199x_dev->client->dev.platform_data; |
| |
| if (arg == 0) { |
| curr_addr = qca199x_dev->client->addr; |
| qca199x_dev->client->addr = slave_addr; |
| r = nfc_i2c_write(qca199x_dev->client, |
| &raw_chip_version_addr, 1); |
| if (r < 0) |
| goto invalid_wr; |
| usleep(10); |
| r = i2c_master_recv(qca199x_dev->client, &raw_chip_version, 1); |
| /* Restore original NFCC slave I2C address */ |
| qca199x_dev->client->addr = curr_addr; |
| } |
| if (arg == 1) { |
| curr_addr = qca199x_dev->client->addr; |
| qca199x_dev->client->addr = slave_addr; |
| r = nfc_i2c_write(qca199x_dev->client, |
| &raw_chip_rev_id_addr, 1); |
| if (r < 0) |
| goto invalid_wr; |
| usleep(10); |
| r = i2c_master_recv(qca199x_dev->client, &raw_chip_version, 1); |
| /* Restore original NFCC slave I2C address */ |
| qca199x_dev->client->addr = curr_addr; |
| } |
| |
| return raw_chip_version; |
| invalid_wr: |
| raw_chip_version = 0xFF; |
| dev_err(&qca199x_dev->client->dev, |
| "\nNFCC_INVALID_CHIP_VERSION = %d\n", raw_chip_version); |
| return raw_chip_version; |
| } |
| |
| |
| |
| /* |
| * Inside nfc_ioctl_kernel_logging |
| * |
| * @brief nfc_ioctl_kernel_logging |
| * |
| * (arg = 0) ; NO_LOGGING |
| * (arg = 1) ; COMMS_LOGGING - BASIC LOGGING - Mainly just comms over I2C |
| * (arg = 2) ; FULL_LOGGING - ENABLE ALL - DBG messages for handlers etc. |
| * ; ! Be aware as amount of logging could impact behaviour ! |
| * |
| * |
| */ |
| int nfc_ioctl_kernel_logging(unsigned long arg, struct file *filp) |
| { |
| int retval = 0; |
| struct qca199x_dev *qca199x_dev = container_of(filp->private_data, |
| struct qca199x_dev, |
| qca199x_device); |
| if (arg == 0) { |
| dev_dbg(&qca199x_dev->client->dev, |
| "nfc_ioctl_kernel_logging : level = NO_LOGGING\n"); |
| logging_level = 0; |
| } else if (arg == 1) { |
| dev_dbg(&qca199x_dev->client->dev, |
| "nfc_ioctl_kernel_logging: level = COMMS_LOGGING only\n"); |
| logging_level = 1; |
| } else if (arg == 2) { |
| dev_dbg(&qca199x_dev->client->dev, |
| "nfc_ioctl_kernel_logging: level = FULL_LOGGING\n"); |
| logging_level = 2; |
| } |
| return retval; |
| } |
| |
| static long nfc_ioctl(struct file *pfile, unsigned int cmd, unsigned long arg) |
| { |
| int r = 0; |
| |
| switch (cmd) { |
| |
| case NFC_SET_PWR: |
| nfc_ioctl_power_states(pfile, cmd, arg); |
| break; |
| case NFCC_MODE: |
| nfc_ioctl_nfcc_mode(pfile, cmd, arg); |
| break; |
| case NFCC_VERSION: |
| r = nfc_ioctl_nfcc_version(pfile, cmd, arg); |
| break; |
| case NFC_KERNEL_LOGGING_MODE: |
| nfc_ioctl_kernel_logging(arg, pfile); |
| break; |
| case SET_RX_BLOCK: |
| break; |
| case SET_EMULATOR_TEST_POINT: |
| break; |
| default: |
| r = -ENOIOCTLCMD; |
| } |
| return r; |
| } |
| |
| static const struct file_operations nfc_dev_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .poll = nfc_poll, |
| .read = nfc_read, |
| .write = nfc_write, |
| .open = nfc_open, |
| .unlocked_ioctl = nfc_ioctl |
| }; |
| |
| void dumpqca1990(struct i2c_client *client) |
| { |
| int r = 0; |
| int i = 0; |
| unsigned char raw_reg_rd = {0x0}; |
| unsigned short temp_addr; |
| |
| temp_addr = client->addr; |
| client->addr = 0x0E; |
| |
| for (i = 0; i < MAX_QCA_REG; i++) { |
| raw_reg_rd = i; |
| if (((i >= 0x0) && (i < 0x4)) || ((i > 0x7) && (i < 0xA)) || |
| ((i > 0xF) && (i < 0x12)) || ((i > 0x39) && (i < 0x4d)) || |
| ((i > 0x69) && (i < 0x74)) || (i == 0x18) || (i == 0x30) || |
| (i == 0x58)) { |
| r = nfc_i2c_write(client, &raw_reg_rd, 1); |
| msleep(20); |
| r = i2c_master_recv(client, &raw_reg_rd, 1); |
| } |
| } |
| client->addr = temp_addr; |
| } |
| |
| static int nfc_i2c_write(struct i2c_client *client, u8 *buf, int len) |
| { |
| int r; |
| |
| r = i2c_master_send(client, buf, len); |
| dev_dbg(&client->dev, "send: %d\n", r); |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ |
| usleep_range(6000, 10000); |
| r = i2c_master_send(client, buf, len); |
| dev_dbg(&client->dev, "send2: %d\n", r); |
| } |
| if (r != len) |
| return -EREMOTEIO; |
| |
| return r; |
| } |
| |
| static int nfcc_initialise(struct i2c_client *client, unsigned short curr_addr) |
| { |
| int r = 0; |
| unsigned char raw_1p8_CONTROL_011[] = {0x11, XTAL_CLOCK}; |
| unsigned char raw_1P8_CONTROL_010[] = {0x10, PWR_EN}; |
| unsigned char raw_1P8_X0_0B0[] = {0xB0, (FREQ_SEL)}; |
| unsigned char raw_slave1[] = {0x09, NCI_I2C_SLAVE}; |
| unsigned char raw_slave2[] = {0x8, 0x10}; |
| unsigned char raw_s73[] = {0x73, 0x02}; |
| unsigned char raw_slave1_rd = {0x0}; |
| unsigned char raw_1P8_PAD_CFG_CLK_REQ[] = {0xA5, 0x1}; |
| unsigned char raw_1P8_PAD_CFG_PWR_REQ[] = {0xA7, 0x1}; |
| unsigned char buf = 0; |
| |
| client->addr = curr_addr; |
| r = i2c_master_send(client, &buf, 1); |
| buf = 0; |
| r = i2c_master_recv(client, &buf, 1); |
| if (0x10 != (0x10 & buf)) { |
| RAW(s73, 0x02); |
| |
| r = nfc_i2c_write(client, &raw_s73[0], sizeof(raw_s73)); |
| usleep(1000); |
| RAW(1p8_CONTROL_011, XTAL_CLOCK | 0x01); |
| |
| r = nfc_i2c_write(client, &raw_1p8_CONTROL_011[0], |
| sizeof(raw_1p8_CONTROL_011)); |
| usleep(1000); |
| RAW(1P8_CONTROL_010, (0x8)); |
| r = nfc_i2c_write(client, &raw_1P8_CONTROL_010[0], |
| sizeof(raw_1P8_CONTROL_010)); |
| |
| usleep(10000); /* 10ms wait */ |
| RAW(1P8_CONTROL_010, (0xC)); |
| r = nfc_i2c_write(client, &raw_1P8_CONTROL_010[0], |
| sizeof(raw_1P8_CONTROL_010)); |
| usleep(100); /* 100uS wait */ |
| RAW(1P8_X0_0B0, (FREQ_SEL_19)); |
| r = nfc_i2c_write(client, &raw_1P8_X0_0B0[0], |
| sizeof(raw_1P8_X0_0B0)); |
| usleep(1000); |
| |
| /* PWR_EN = 1 */ |
| RAW(1P8_CONTROL_010, (0xd)); |
| r = nfc_i2c_write(client, &raw_1P8_CONTROL_010[0], |
| sizeof(raw_1P8_CONTROL_010)); |
| usleep(20000); /* 20ms wait */ |
| /* LS_EN = 1 */ |
| RAW(1P8_CONTROL_010, 0xF); |
| r = nfc_i2c_write(client, &raw_1P8_CONTROL_010[0], |
| sizeof(raw_1P8_CONTROL_010)); |
| usleep(20000); /* 20ms wait */ |
| |
| /* Enable the PMIC clock */ |
| RAW(1P8_PAD_CFG_CLK_REQ, (0x1)); |
| r = nfc_i2c_write(client, &raw_1P8_PAD_CFG_CLK_REQ[0], |
| sizeof(raw_1P8_PAD_CFG_CLK_REQ)); |
| usleep(1000); |
| |
| RAW(1P8_PAD_CFG_PWR_REQ, (0x1)); |
| r = nfc_i2c_write(client, &raw_1P8_PAD_CFG_PWR_REQ[0], |
| sizeof(raw_1P8_PAD_CFG_PWR_REQ)); |
| usleep(1000); |
| |
| RAW(slave2, 0x10); |
| r = nfc_i2c_write(client, &raw_slave2[0], sizeof(raw_slave2)); |
| usleep(1000); |
| |
| RAW(slave1, NCI_I2C_SLAVE); |
| r = nfc_i2c_write(client, &raw_slave1[0], sizeof(raw_slave1)); |
| usleep(1000); |
| |
| /* QCA199x NFCC CPU should now boot... */ |
| r = i2c_master_recv(client, &raw_slave1_rd, 1); |
| /* Talk on NCI slave address NCI_I2C_SLAVE 0x2C*/ |
| client->addr = NCI_I2C_SLAVE; |
| r = 0; |
| } else { |
| r = 1; |
| } |
| return r; |
| } |
| |
| static int nfc_parse_dt(struct device *dev, struct qca199x_platform_data *pdata) |
| { |
| int r = 0; |
| struct device_node *np = dev->of_node; |
| |
| r = of_property_read_u32(np, "reg", &pdata->reg); |
| if (r) |
| return -EINVAL; |
| |
| r = of_property_read_u32(np, "qcom,clk-gpio", &pdata->ven_gpio); |
| if (r) |
| return -EINVAL; |
| |
| pdata->dis_gpio = of_get_named_gpio(np, "qcom,dis-gpio", 0); |
| if ((!gpio_is_valid(pdata->dis_gpio))) |
| return -EINVAL; |
| |
| pdata->irq_gpio = of_get_named_gpio(np, "qcom,irq-gpio", 0); |
| if ((!gpio_is_valid(pdata->irq_gpio))) |
| return -EINVAL; |
| |
| r = of_property_read_string(np, "qcom,clk-src", &pdata->clk_src); |
| |
| if (!strcmp(pdata->clk_src, "GPCLK")) |
| pdata->clk_src_gpio = of_get_named_gpio(np, |
| "qcom,clk-en-gpio", 0); |
| |
| if (r) |
| return -EINVAL; |
| return r; |
| } |
| |
| static int qca199x_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int r = 0; |
| int irqn = 0; |
| struct clk *nfc_clk = NULL; |
| struct device_node *node = client->dev.of_node; |
| struct qca199x_platform_data *platform_data; |
| struct qca199x_dev *qca199x_dev; |
| |
| if (client->dev.of_node) { |
| platform_data = devm_kzalloc(&client->dev, |
| sizeof(struct qca199x_platform_data), GFP_KERNEL); |
| if (!platform_data) { |
| dev_err(&client->dev, |
| "nfc-nci probe: Failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| r = nfc_parse_dt(&client->dev, platform_data); |
| if (r) |
| return r; |
| } else { |
| platform_data = client->dev.platform_data; |
| } |
| if (!platform_data) |
| return -EINVAL; |
| dev_dbg(&client->dev, |
| "nfc-nci probe: %s, inside nfc-nci flags = %x\n", |
| __func__, client->flags); |
| if (platform_data == NULL) { |
| dev_err(&client->dev, "nfc-nci probe: failed\n"); |
| return -ENODEV; |
| } |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, "nfc-nci probe: need I2C_FUNC_I2C\n"); |
| return -ENODEV; |
| } |
| qca199x_dev = kzalloc(sizeof(*qca199x_dev), GFP_KERNEL); |
| if (qca199x_dev == NULL) { |
| dev_err(&client->dev, |
| "nfc-nci probe: failed to allocate memory for module data\n"); |
| return -ENOMEM; |
| } |
| if (gpio_is_valid(platform_data->irq_gpio)) { |
| r = gpio_request(platform_data->irq_gpio, "nfc_irq_gpio"); |
| if (r) { |
| dev_err(&client->dev, "unable to request gpio [%d]\n", |
| platform_data->irq_gpio); |
| goto err_irq; |
| } |
| r = gpio_direction_input(platform_data->irq_gpio); |
| if (r) { |
| |
| dev_err(&client->dev, |
| "unable to set direction for gpio [%d]\n", |
| platform_data->irq_gpio); |
| goto err_irq; |
| } |
| gpio_to_irq(0); |
| irqn = gpio_to_irq(platform_data->irq_gpio); |
| if (irqn < 0) { |
| r = irqn; |
| goto err_irq; |
| } |
| client->irq = irqn; |
| |
| } else { |
| dev_err(&client->dev, "irq gpio not provided\n"); |
| goto err_free_dev; |
| } |
| if (gpio_is_valid(platform_data->dis_gpio)) { |
| r = gpio_request(platform_data->dis_gpio, "nfc_reset_gpio"); |
| if (r) { |
| dev_err(&client->dev, |
| "NFC: unable to request gpio [%d]\n", |
| platform_data->dis_gpio); |
| goto err_free_dev; |
| } |
| r = gpio_direction_output(platform_data->dis_gpio, 1); |
| if (r) { |
| dev_err(&client->dev, |
| "NFC: unable to set direction for gpio [%d]\n", |
| platform_data->dis_gpio); |
| goto err_dis_gpio; |
| } |
| } else { |
| dev_err(&client->dev, "dis gpio not provided\n"); |
| goto err_irq; |
| } |
| gpio_set_value(platform_data->dis_gpio, 1);/* HPD */ |
| msleep(20); |
| gpio_set_value(platform_data->dis_gpio, 0);/* ULPM */ |
| if (!strcmp(platform_data->clk_src, "BBCLK2")) { |
| nfc_clk = clk_get(&client->dev, "ref_clk"); |
| if (nfc_clk == NULL) |
| goto err_dis_gpio; |
| } else if (!strcmp(platform_data->clk_src, "RFCLK3")) { |
| nfc_clk = clk_get(&client->dev, "ref_clk_rf"); |
| if (nfc_clk == NULL) |
| goto err_dis_gpio; |
| } else if (!strcmp(platform_data->clk_src, "GPCLK")) { |
| if (gpio_is_valid(platform_data->clk_src_gpio)) { |
| nfc_clk = clk_get(&client->dev, "core_clk"); |
| if (nfc_clk == NULL) |
| goto err_dis_gpio; |
| } else { |
| goto err_dis_gpio; |
| } |
| } else { |
| nfc_clk = NULL; |
| } |
| r = clk_prepare_enable(nfc_clk); |
| if (r) |
| goto err_clk; |
| |
| platform_data->ven_gpio = of_get_named_gpio(node, |
| "qcom,clk-gpio", 0); |
| |
| if (gpio_is_valid(platform_data->ven_gpio)) { |
| r = gpio_request(platform_data->ven_gpio, "nfc_ven_gpio"); |
| if (r) { |
| dev_err(&client->dev, "unable to request gpio [%d]\n", |
| platform_data->ven_gpio); |
| goto err_ven_gpio; |
| } |
| r = gpio_direction_input(platform_data->ven_gpio); |
| if (r) { |
| |
| dev_err(&client->dev, |
| "unable to set direction for gpio [%d]\n", |
| platform_data->ven_gpio); |
| goto err_ven_gpio; |
| } |
| } else { |
| dev_err(&client->dev, "ven gpio not provided\n"); |
| goto err_clk; |
| } |
| qca199x_dev->dis_gpio = platform_data->dis_gpio; |
| qca199x_dev->irq_gpio = platform_data->irq_gpio; |
| qca199x_dev->ven_gpio = platform_data->ven_gpio; |
| qca199x_dev->client = client; |
| |
| /* init mutex and queues */ |
| init_waitqueue_head(&qca199x_dev->read_wq); |
| mutex_init(&qca199x_dev->read_mutex); |
| spin_lock_init(&qca199x_dev->irq_enabled_lock); |
| |
| qca199x_dev->qca199x_device.minor = MISC_DYNAMIC_MINOR; |
| qca199x_dev->qca199x_device.name = "nfc-nci"; |
| qca199x_dev->qca199x_device.fops = &nfc_dev_fops; |
| |
| r = misc_register(&qca199x_dev->qca199x_device); |
| if (r) { |
| dev_err(&client->dev, "misc_register failed\n"); |
| goto err_misc_register; |
| } |
| |
| regulators.regulator = regulator_get(&client->dev, regulators.name); |
| if (IS_ERR(regulators.regulator)) { |
| r = PTR_ERR(regulators.regulator); |
| pr_err("regulator get of %s failed (%d)\n", regulators.name, r); |
| } else { |
| /* Enable the regulator */ |
| r = regulator_enable(regulators.regulator); |
| if (r) { |
| pr_err("vreg %s enable failed (%d)\n", |
| regulators.name, r); |
| } |
| } |
| |
| logging_level = 0; |
| /* request irq. The irq is set whenever the chip has data available |
| * for reading. It is cleared when all data has been read. |
| */ |
| device_mode.handle_flavour = UNSOLICITED_MODE; |
| r = nfcc_initialise(client, platform_data->reg); |
| if (r) { |
| dev_err(&client->dev, "nfc-nci probe: request nfcc initialise failed\n"); |
| goto err_nfcc_init_failed; |
| } |
| |
| qca199x_dev->irq_enabled = true; |
| r = request_irq(client->irq, qca199x_dev_irq_handler, |
| IRQF_TRIGGER_RISING, client->name, qca199x_dev); |
| if (r) { |
| dev_err(&client->dev, "nfc-nci probe: request_irq failed\n"); |
| goto err_request_irq_failed; |
| } |
| qca199x_disable_irq(qca199x_dev); |
| i2c_set_clientdata(client, qca199x_dev); |
| dev_dbg(&client->dev, |
| "nfc-nci probe: %s, probing qca1990 exited successfully\n", |
| __func__); |
| return 0; |
| |
| err_nfcc_init_failed: |
| err_request_irq_failed: |
| misc_deregister(&qca199x_dev->qca199x_device); |
| err_misc_register: |
| mutex_destroy(&qca199x_dev->read_mutex); |
| err_ven_gpio: |
| gpio_free(platform_data->ven_gpio); |
| err_clk: |
| clk_disable_unprepare(nfc_clk); |
| err_dis_gpio: |
| r = gpio_direction_input(platform_data->dis_gpio); |
| if (r) |
| dev_err(&client->dev, "nfc-nci probe: Unable to set direction\n"); |
| if (!strcmp(platform_data->clk_src, "GPCLK")) { |
| r = gpio_direction_input(platform_data->clk_src_gpio); |
| if (r) |
| dev_err(&client->dev, "nfc-nci probe: Unable to set direction\n"); |
| gpio_free(platform_data->clk_src_gpio); |
| } |
| gpio_free(platform_data->dis_gpio); |
| err_irq: |
| gpio_free(platform_data->irq_gpio); |
| err_free_dev: |
| kfree(qca199x_dev); |
| return r; |
| } |
| |
| static int qca199x_remove(struct i2c_client *client) |
| { |
| struct qca199x_dev *qca199x_dev; |
| |
| qca199x_dev = i2c_get_clientdata(client); |
| free_irq(client->irq, qca199x_dev); |
| misc_deregister(&qca199x_dev->qca199x_device); |
| mutex_destroy(&qca199x_dev->read_mutex); |
| gpio_free(qca199x_dev->irq_gpio); |
| gpio_free(qca199x_dev->dis_gpio); |
| gpio_free(qca199x_dev->ven_gpio); |
| kfree(qca199x_dev); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id qca199x_id[] = { |
| {"qca199x-i2c", 0}, |
| {} |
| }; |
| |
| static struct i2c_driver qca199x = { |
| .id_table = qca199x_id, |
| .probe = qca199x_probe, |
| .remove = qca199x_remove, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "nfc-nci", |
| .of_match_table = msm_match_table, |
| }, |
| }; |
| |
| /* |
| * module load/unload record keeping |
| */ |
| static int __init qca199x_dev_init(void) |
| { |
| return i2c_add_driver(&qca199x); |
| } |
| module_init(qca199x_dev_init); |
| |
| static void __exit qca199x_dev_exit(void) |
| { |
| i2c_del_driver(&qca199x); |
| } |
| module_exit(qca199x_dev_exit); |
| |
| MODULE_DESCRIPTION("NFC QCA199x"); |
| MODULE_LICENSE("GPL v2"); |
| |