| /* |
| * (C) Copyright 2008 Intel Corporation |
| * Authors: |
| * Andy Henroid <andrew.d.henroid@intel.com> |
| * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> |
| */ |
| |
| /* |
| * Save DIMM power on Intel 7300-based platforms when all CPUs/cores |
| * are idle, using the DIMM thermal throttling capability. |
| * |
| * This driver depends on the Intel integrated DMA controller (I/O AT). |
| * If the driver for I/O AT (drivers/dma/ioatdma*) is also enabled, |
| * this driver should work cooperatively. |
| */ |
| |
| /* #define DEBUG */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| #include <linux/notifier.h> |
| #include <linux/cpumask.h> |
| #include <linux/ktime.h> |
| #include <linux/delay.h> |
| #include <linux/debugfs.h> |
| #include <linux/stop_machine.h> |
| #include <linux/i7300_idle.h> |
| |
| #include <asm/idle.h> |
| |
| #include "../dma/ioat/hw.h" |
| #include "../dma/ioat/registers.h" |
| |
| #define I7300_IDLE_DRIVER_VERSION "1.55" |
| #define I7300_PRINT "i7300_idle:" |
| |
| #define MAX_STOP_RETRIES 10 |
| |
| static int debug; |
| module_param_named(debug, debug, uint, 0644); |
| MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); |
| |
| static int forceload; |
| module_param_named(forceload, forceload, uint, 0644); |
| MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000"); |
| |
| #define dprintk(fmt, arg...) \ |
| do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0) |
| |
| /* |
| * Value to set THRTLOW to when initiating throttling |
| * 0 = No throttling |
| * 1 = Throttle when > 4 activations per eval window (Maximum throttling) |
| * 2 = Throttle when > 8 activations |
| * 168 = Throttle when > 672 activations (Minimum throttling) |
| */ |
| #define MAX_THROTTLE_LOW_LIMIT 168 |
| static uint throttle_low_limit = 1; |
| module_param_named(throttle_low_limit, throttle_low_limit, uint, 0644); |
| MODULE_PARM_DESC(throttle_low_limit, |
| "Value for THRTLOWLM activation field " |
| "(0 = disable throttle, 1 = Max throttle, 168 = Min throttle)"); |
| |
| /* |
| * simple invocation and duration statistics |
| */ |
| static unsigned long total_starts; |
| static unsigned long total_us; |
| |
| #ifdef DEBUG |
| static unsigned long past_skip; |
| #endif |
| |
| static struct pci_dev *fbd_dev; |
| |
| static spinlock_t i7300_idle_lock; |
| static int i7300_idle_active; |
| |
| static u8 i7300_idle_thrtctl_saved; |
| static u8 i7300_idle_thrtlow_saved; |
| static u32 i7300_idle_mc_saved; |
| |
| static cpumask_t idle_cpumask; |
| static ktime_t start_ktime; |
| static unsigned long avg_idle_us; |
| |
| static struct dentry *debugfs_dir; |
| |
| /* Begin: I/O AT Helper routines */ |
| |
| #define IOAT_CHANBASE(ioat_ctl, chan) (ioat_ctl + 0x80 + 0x80 * chan) |
| /* Snoop control (disable snoops when coherency is not important) */ |
| #define IOAT_DESC_SADDR_SNP_CTL (1UL << 1) |
| #define IOAT_DESC_DADDR_SNP_CTL (1UL << 2) |
| |
| static struct pci_dev *ioat_dev; |
| static struct ioat_dma_descriptor *ioat_desc; /* I/O AT desc & data (1 page) */ |
| static unsigned long ioat_desc_phys; |
| static u8 *ioat_iomap; /* I/O AT memory-mapped control regs (aka CB_BAR) */ |
| static u8 *ioat_chanbase; |
| |
| /* Start I/O AT memory copy */ |
| static int i7300_idle_ioat_start(void) |
| { |
| u32 err; |
| /* Clear error (due to circular descriptor pointer) */ |
| err = readl(ioat_chanbase + IOAT_CHANERR_OFFSET); |
| if (err) |
| writel(err, ioat_chanbase + IOAT_CHANERR_OFFSET); |
| |
| writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| return 0; |
| } |
| |
| /* Stop I/O AT memory copy */ |
| static void i7300_idle_ioat_stop(void) |
| { |
| int i; |
| u64 sts; |
| |
| for (i = 0; i < MAX_STOP_RETRIES; i++) { |
| writeb(IOAT_CHANCMD_RESET, |
| ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| |
| udelay(10); |
| |
| sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
| IOAT_CHANSTS_STATUS; |
| |
| if (sts != IOAT_CHANSTS_ACTIVE) |
| break; |
| |
| } |
| |
| if (i == MAX_STOP_RETRIES) { |
| dprintk("failed to stop I/O AT after %d retries\n", |
| MAX_STOP_RETRIES); |
| } |
| } |
| |
| /* Test I/O AT by copying 1024 byte from 2k to 1k */ |
| static int __init i7300_idle_ioat_selftest(u8 *ctl, |
| struct ioat_dma_descriptor *desc, unsigned long desc_phys) |
| { |
| u64 chan_sts; |
| |
| memset(desc, 0, 2048); |
| memset((u8 *) desc + 2048, 0xab, 1024); |
| |
| desc[0].size = 1024; |
| desc[0].ctl = 0; |
| desc[0].src_addr = desc_phys + 2048; |
| desc[0].dst_addr = desc_phys + 1024; |
| desc[0].next = 0; |
| |
| writeb(IOAT_CHANCMD_RESET, ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| writeb(IOAT_CHANCMD_START, ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| |
| udelay(1000); |
| |
| chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
| IOAT_CHANSTS_STATUS; |
| |
| if (chan_sts != IOAT_CHANSTS_DONE) { |
| /* Not complete, reset the channel */ |
| writeb(IOAT_CHANCMD_RESET, |
| ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| return -1; |
| } |
| |
| if (*(u32 *) ((u8 *) desc + 3068) != 0xabababab || |
| *(u32 *) ((u8 *) desc + 2044) != 0xabababab) { |
| dprintk("Data values src 0x%x, dest 0x%x, memset 0x%x\n", |
| *(u32 *) ((u8 *) desc + 2048), |
| *(u32 *) ((u8 *) desc + 1024), |
| *(u32 *) ((u8 *) desc + 3072)); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static struct device dummy_dma_dev = { |
| .init_name = "fallback device", |
| .coherent_dma_mask = DMA_BIT_MASK(64), |
| .dma_mask = &dummy_dma_dev.coherent_dma_mask, |
| }; |
| |
| /* Setup and initialize I/O AT */ |
| /* This driver needs I/O AT as the throttling takes effect only when there is |
| * some memory activity. We use I/O AT to set up a dummy copy, while all CPUs |
| * go idle and memory is throttled. |
| */ |
| static int __init i7300_idle_ioat_init(void) |
| { |
| u8 ver, chan_count, ioat_chan; |
| u16 chan_ctl; |
| |
| ioat_iomap = (u8 *) ioremap_nocache(pci_resource_start(ioat_dev, 0), |
| pci_resource_len(ioat_dev, 0)); |
| |
| if (!ioat_iomap) { |
| printk(KERN_ERR I7300_PRINT "failed to map I/O AT registers\n"); |
| goto err_ret; |
| } |
| |
| ver = readb(ioat_iomap + IOAT_VER_OFFSET); |
| if (ver != IOAT_VER_1_2) { |
| printk(KERN_ERR I7300_PRINT "unknown I/O AT version (%u.%u)\n", |
| ver >> 4, ver & 0xf); |
| goto err_unmap; |
| } |
| |
| chan_count = readb(ioat_iomap + IOAT_CHANCNT_OFFSET); |
| if (!chan_count) { |
| printk(KERN_ERR I7300_PRINT "unexpected # of I/O AT channels " |
| "(%u)\n", |
| chan_count); |
| goto err_unmap; |
| } |
| |
| ioat_chan = chan_count - 1; |
| ioat_chanbase = IOAT_CHANBASE(ioat_iomap, ioat_chan); |
| |
| chan_ctl = readw(ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| if (chan_ctl & IOAT_CHANCTRL_CHANNEL_IN_USE) { |
| printk(KERN_ERR I7300_PRINT "channel %d in use\n", ioat_chan); |
| goto err_unmap; |
| } |
| |
| writew(IOAT_CHANCTRL_CHANNEL_IN_USE, |
| ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| |
| ioat_desc = (struct ioat_dma_descriptor *)dma_alloc_coherent( |
| &dummy_dma_dev, 4096, |
| (dma_addr_t *)&ioat_desc_phys, GFP_KERNEL); |
| if (!ioat_desc) { |
| printk(KERN_ERR I7300_PRINT "failed to allocate I/O AT desc\n"); |
| goto err_mark_unused; |
| } |
| |
| writel(ioat_desc_phys & 0xffffffffUL, |
| ioat_chanbase + IOAT1_CHAINADDR_OFFSET_LOW); |
| writel(ioat_desc_phys >> 32, |
| ioat_chanbase + IOAT1_CHAINADDR_OFFSET_HIGH); |
| |
| if (i7300_idle_ioat_selftest(ioat_iomap, ioat_desc, ioat_desc_phys)) { |
| printk(KERN_ERR I7300_PRINT "I/O AT self-test failed\n"); |
| goto err_free; |
| } |
| |
| /* Setup circular I/O AT descriptor chain */ |
| ioat_desc[0].ctl = IOAT_DESC_SADDR_SNP_CTL | IOAT_DESC_DADDR_SNP_CTL; |
| ioat_desc[0].src_addr = ioat_desc_phys + 2048; |
| ioat_desc[0].dst_addr = ioat_desc_phys + 3072; |
| ioat_desc[0].size = 128; |
| ioat_desc[0].next = ioat_desc_phys + sizeof(struct ioat_dma_descriptor); |
| |
| ioat_desc[1].ctl = ioat_desc[0].ctl; |
| ioat_desc[1].src_addr = ioat_desc[0].src_addr; |
| ioat_desc[1].dst_addr = ioat_desc[0].dst_addr; |
| ioat_desc[1].size = ioat_desc[0].size; |
| ioat_desc[1].next = ioat_desc_phys; |
| |
| return 0; |
| |
| err_free: |
| dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0); |
| err_mark_unused: |
| writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| err_unmap: |
| iounmap(ioat_iomap); |
| err_ret: |
| return -ENODEV; |
| } |
| |
| /* Cleanup I/O AT */ |
| static void __exit i7300_idle_ioat_exit(void) |
| { |
| int i; |
| u64 chan_sts; |
| |
| i7300_idle_ioat_stop(); |
| |
| /* Wait for a while for the channel to halt before releasing */ |
| for (i = 0; i < MAX_STOP_RETRIES; i++) { |
| writeb(IOAT_CHANCMD_RESET, |
| ioat_chanbase + IOAT1_CHANCMD_OFFSET); |
| |
| chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
| IOAT_CHANSTS_STATUS; |
| |
| if (chan_sts != IOAT_CHANSTS_ACTIVE) { |
| writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET); |
| break; |
| } |
| udelay(1000); |
| } |
| |
| chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) & |
| IOAT_CHANSTS_STATUS; |
| |
| /* |
| * We tried to reset multiple times. If IO A/T channel is still active |
| * flag an error and return without cleanup. Memory leak is better |
| * than random corruption in that extreme error situation. |
| */ |
| if (chan_sts == IOAT_CHANSTS_ACTIVE) { |
| printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels." |
| " Not freeing resources\n"); |
| return; |
| } |
| |
| dma_free_coherent(&dummy_dma_dev, 4096, (void *)ioat_desc, 0); |
| iounmap(ioat_iomap); |
| } |
| |
| /* End: I/O AT Helper routines */ |
| |
| #define DIMM_THRTLOW 0x64 |
| #define DIMM_THRTCTL 0x67 |
| #define DIMM_THRTCTL_THRMHUNT (1UL << 0) |
| #define DIMM_MC 0x40 |
| #define DIMM_GTW_MODE (1UL << 17) |
| #define DIMM_GBLACT 0x60 |
| |
| /* |
| * Keep track of an exponential-decaying average of recent idle durations. |
| * The latest duration gets DURATION_WEIGHT_PCT percentage weight |
| * in this average, with the old average getting the remaining weight. |
| * |
| * High weights emphasize recent history, low weights include long history. |
| */ |
| #define DURATION_WEIGHT_PCT 55 |
| |
| /* |
| * When the decaying average of recent durations or the predicted duration |
| * of the next timer interrupt is shorter than duration_threshold, the |
| * driver will decline to throttle. |
| */ |
| #define DURATION_THRESHOLD_US 100 |
| |
| |
| /* Store DIMM thermal throttle configuration */ |
| static int i7300_idle_thrt_save(void) |
| { |
| u32 new_mc_val; |
| u8 gblactlm; |
| |
| pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &i7300_idle_thrtctl_saved); |
| pci_read_config_byte(fbd_dev, DIMM_THRTLOW, &i7300_idle_thrtlow_saved); |
| pci_read_config_dword(fbd_dev, DIMM_MC, &i7300_idle_mc_saved); |
| /* |
| * Make sure we have Global Throttling Window Mode set to have a |
| * "short" window. This (mostly) works around an issue where |
| * throttling persists until the end of the global throttling window |
| * size. On the tested system, this was resulting in a maximum of |
| * 64 ms to exit throttling (average 32 ms). The actual numbers |
| * depends on system frequencies. Setting the short window reduces |
| * this by a factor of 4096. |
| * |
| * We will only do this only if the system is set for |
| * unlimited-activations while in open-loop throttling (i.e., when |
| * Global Activation Throttle Limit is zero). |
| */ |
| pci_read_config_byte(fbd_dev, DIMM_GBLACT, &gblactlm); |
| dprintk("thrtctl_saved = 0x%02x, thrtlow_saved = 0x%02x\n", |
| i7300_idle_thrtctl_saved, |
| i7300_idle_thrtlow_saved); |
| dprintk("mc_saved = 0x%08x, gblactlm = 0x%02x\n", |
| i7300_idle_mc_saved, |
| gblactlm); |
| if (gblactlm == 0) { |
| new_mc_val = i7300_idle_mc_saved | DIMM_GTW_MODE; |
| pci_write_config_dword(fbd_dev, DIMM_MC, new_mc_val); |
| return 0; |
| } else { |
| dprintk("could not set GTW_MODE = 1 (OLTT enabled)\n"); |
| return -ENODEV; |
| } |
| } |
| |
| /* Restore DIMM thermal throttle configuration */ |
| static void i7300_idle_thrt_restore(void) |
| { |
| pci_write_config_dword(fbd_dev, DIMM_MC, i7300_idle_mc_saved); |
| pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved); |
| pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved); |
| } |
| |
| /* Enable DIMM thermal throttling */ |
| static void i7300_idle_start(void) |
| { |
| u8 new_ctl; |
| u8 limit; |
| |
| new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT; |
| pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); |
| |
| limit = throttle_low_limit; |
| if (unlikely(limit > MAX_THROTTLE_LOW_LIMIT)) |
| limit = MAX_THROTTLE_LOW_LIMIT; |
| |
| pci_write_config_byte(fbd_dev, DIMM_THRTLOW, limit); |
| |
| new_ctl = i7300_idle_thrtctl_saved | DIMM_THRTCTL_THRMHUNT; |
| pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); |
| } |
| |
| /* Disable DIMM thermal throttling */ |
| static void i7300_idle_stop(void) |
| { |
| u8 new_ctl; |
| u8 got_ctl; |
| |
| new_ctl = i7300_idle_thrtctl_saved & ~DIMM_THRTCTL_THRMHUNT; |
| pci_write_config_byte(fbd_dev, DIMM_THRTCTL, new_ctl); |
| |
| pci_write_config_byte(fbd_dev, DIMM_THRTLOW, i7300_idle_thrtlow_saved); |
| pci_write_config_byte(fbd_dev, DIMM_THRTCTL, i7300_idle_thrtctl_saved); |
| pci_read_config_byte(fbd_dev, DIMM_THRTCTL, &got_ctl); |
| WARN_ON_ONCE(got_ctl != i7300_idle_thrtctl_saved); |
| } |
| |
| |
| /* |
| * i7300_avg_duration_check() |
| * return 0 if the decaying average of recent idle durations is |
| * more than DURATION_THRESHOLD_US |
| */ |
| static int i7300_avg_duration_check(void) |
| { |
| if (avg_idle_us >= DURATION_THRESHOLD_US) |
| return 0; |
| |
| #ifdef DEBUG |
| past_skip++; |
| #endif |
| return 1; |
| } |
| |
| /* Idle notifier to look at idle CPUs */ |
| static int i7300_idle_notifier(struct notifier_block *nb, unsigned long val, |
| void *data) |
| { |
| unsigned long flags; |
| ktime_t now_ktime; |
| static ktime_t idle_begin_time; |
| static int time_init = 1; |
| |
| if (!throttle_low_limit) |
| return 0; |
| |
| if (unlikely(time_init)) { |
| time_init = 0; |
| idle_begin_time = ktime_get(); |
| } |
| |
| spin_lock_irqsave(&i7300_idle_lock, flags); |
| if (val == IDLE_START) { |
| |
| cpu_set(smp_processor_id(), idle_cpumask); |
| |
| if (cpus_weight(idle_cpumask) != num_online_cpus()) |
| goto end; |
| |
| now_ktime = ktime_get(); |
| idle_begin_time = now_ktime; |
| |
| if (i7300_avg_duration_check()) |
| goto end; |
| |
| i7300_idle_active = 1; |
| total_starts++; |
| start_ktime = now_ktime; |
| |
| i7300_idle_start(); |
| i7300_idle_ioat_start(); |
| |
| } else if (val == IDLE_END) { |
| cpu_clear(smp_processor_id(), idle_cpumask); |
| if (cpus_weight(idle_cpumask) == (num_online_cpus() - 1)) { |
| /* First CPU coming out of idle */ |
| u64 idle_duration_us; |
| |
| now_ktime = ktime_get(); |
| |
| idle_duration_us = ktime_to_us(ktime_sub |
| (now_ktime, idle_begin_time)); |
| |
| avg_idle_us = |
| ((100 - DURATION_WEIGHT_PCT) * avg_idle_us + |
| DURATION_WEIGHT_PCT * idle_duration_us) / 100; |
| |
| if (i7300_idle_active) { |
| ktime_t idle_ktime; |
| |
| idle_ktime = ktime_sub(now_ktime, start_ktime); |
| total_us += ktime_to_us(idle_ktime); |
| |
| i7300_idle_ioat_stop(); |
| i7300_idle_stop(); |
| i7300_idle_active = 0; |
| } |
| } |
| } |
| end: |
| spin_unlock_irqrestore(&i7300_idle_lock, flags); |
| return 0; |
| } |
| |
| static struct notifier_block i7300_idle_nb = { |
| .notifier_call = i7300_idle_notifier, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, pci_tbl); |
| |
| int stats_open_generic(struct inode *inode, struct file *fp) |
| { |
| fp->private_data = inode->i_private; |
| return 0; |
| } |
| |
| static ssize_t stats_read_ul(struct file *fp, char __user *ubuf, size_t count, |
| loff_t *off) |
| { |
| unsigned long *p = fp->private_data; |
| char buf[32]; |
| int len; |
| |
| len = snprintf(buf, 32, "%lu\n", *p); |
| return simple_read_from_buffer(ubuf, count, off, buf, len); |
| } |
| |
| static const struct file_operations idle_fops = { |
| .open = stats_open_generic, |
| .read = stats_read_ul, |
| }; |
| |
| struct debugfs_file_info { |
| void *ptr; |
| char name[32]; |
| struct dentry *file; |
| } debugfs_file_list[] = { |
| {&total_starts, "total_starts", NULL}, |
| {&total_us, "total_us", NULL}, |
| #ifdef DEBUG |
| {&past_skip, "past_skip", NULL}, |
| #endif |
| {NULL, "", NULL} |
| }; |
| |
| static int __init i7300_idle_init(void) |
| { |
| spin_lock_init(&i7300_idle_lock); |
| cpus_clear(idle_cpumask); |
| total_us = 0; |
| |
| if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) |
| return -ENODEV; |
| |
| if (i7300_idle_thrt_save()) |
| return -ENODEV; |
| |
| if (i7300_idle_ioat_init()) |
| return -ENODEV; |
| |
| debugfs_dir = debugfs_create_dir("i7300_idle", NULL); |
| if (debugfs_dir) { |
| int i = 0; |
| |
| while (debugfs_file_list[i].ptr != NULL) { |
| debugfs_file_list[i].file = debugfs_create_file( |
| debugfs_file_list[i].name, |
| S_IRUSR, |
| debugfs_dir, |
| debugfs_file_list[i].ptr, |
| &idle_fops); |
| i++; |
| } |
| } |
| |
| idle_notifier_register(&i7300_idle_nb); |
| |
| printk(KERN_INFO "i7300_idle: loaded v%s\n", I7300_IDLE_DRIVER_VERSION); |
| return 0; |
| } |
| |
| static void __exit i7300_idle_exit(void) |
| { |
| idle_notifier_unregister(&i7300_idle_nb); |
| |
| if (debugfs_dir) { |
| int i = 0; |
| |
| while (debugfs_file_list[i].file != NULL) { |
| debugfs_remove(debugfs_file_list[i].file); |
| i++; |
| } |
| |
| debugfs_remove(debugfs_dir); |
| } |
| i7300_idle_thrt_restore(); |
| i7300_idle_ioat_exit(); |
| } |
| |
| module_init(i7300_idle_init); |
| module_exit(i7300_idle_exit); |
| |
| MODULE_AUTHOR("Andy Henroid <andrew.d.henroid@intel.com>"); |
| MODULE_DESCRIPTION("Intel Chipset DIMM Idle Power Saving Driver v" |
| I7300_IDLE_DRIVER_VERSION); |
| MODULE_LICENSE("GPL"); |