| /* -*- mode: c; c-basic-offset: 8; -*- |
| * vim: noexpandtab sw=8 ts=8 sts=0: |
| * |
| * journal.h |
| * |
| * Defines journalling api and structures. |
| * |
| * Copyright (C) 2003, 2005 Oracle. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this program; if not, write to the |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| * Boston, MA 021110-1307, USA. |
| */ |
| |
| #ifndef OCFS2_JOURNAL_H |
| #define OCFS2_JOURNAL_H |
| |
| #include <linux/fs.h> |
| #include <linux/jbd.h> |
| |
| enum ocfs2_journal_state { |
| OCFS2_JOURNAL_FREE = 0, |
| OCFS2_JOURNAL_LOADED, |
| OCFS2_JOURNAL_IN_SHUTDOWN, |
| }; |
| |
| struct ocfs2_super; |
| struct ocfs2_dinode; |
| struct ocfs2_journal_handle; |
| |
| struct ocfs2_journal { |
| enum ocfs2_journal_state j_state; /* Journals current state */ |
| |
| journal_t *j_journal; /* The kernels journal type */ |
| struct inode *j_inode; /* Kernel inode pointing to |
| * this journal */ |
| struct ocfs2_super *j_osb; /* pointer to the super |
| * block for the node |
| * we're currently |
| * running on -- not |
| * necessarily the super |
| * block from the node |
| * which we usually run |
| * from (recovery, |
| * etc) */ |
| struct buffer_head *j_bh; /* Journal disk inode block */ |
| atomic_t j_num_trans; /* Number of transactions |
| * currently in the system. */ |
| unsigned long j_trans_id; |
| struct rw_semaphore j_trans_barrier; |
| wait_queue_head_t j_checkpointed; |
| |
| spinlock_t j_lock; |
| struct list_head j_la_cleanups; |
| struct work_struct j_recovery_work; |
| }; |
| |
| extern spinlock_t trans_inc_lock; |
| |
| /* wrap j_trans_id so we never have it equal to zero. */ |
| static inline unsigned long ocfs2_inc_trans_id(struct ocfs2_journal *j) |
| { |
| unsigned long old_id; |
| spin_lock(&trans_inc_lock); |
| old_id = j->j_trans_id++; |
| if (unlikely(!j->j_trans_id)) |
| j->j_trans_id = 1; |
| spin_unlock(&trans_inc_lock); |
| return old_id; |
| } |
| |
| static inline void ocfs2_set_inode_lock_trans(struct ocfs2_journal *journal, |
| struct inode *inode) |
| { |
| spin_lock(&trans_inc_lock); |
| OCFS2_I(inode)->ip_last_trans = journal->j_trans_id; |
| spin_unlock(&trans_inc_lock); |
| } |
| |
| /* Used to figure out whether it's safe to drop a metadata lock on an |
| * inode. Returns true if all the inodes changes have been |
| * checkpointed to disk. You should be holding the spinlock on the |
| * metadata lock while calling this to be sure that nobody can take |
| * the lock and put it on another transaction. */ |
| static inline int ocfs2_inode_fully_checkpointed(struct inode *inode) |
| { |
| int ret; |
| struct ocfs2_journal *journal = OCFS2_SB(inode->i_sb)->journal; |
| |
| spin_lock(&trans_inc_lock); |
| ret = time_after(journal->j_trans_id, OCFS2_I(inode)->ip_last_trans); |
| spin_unlock(&trans_inc_lock); |
| return ret; |
| } |
| |
| /* convenience function to check if an inode is still new (has never |
| * hit disk) Will do you a favor and set created_trans = 0 when you've |
| * been checkpointed. returns '1' if the inode is still new. */ |
| static inline int ocfs2_inode_is_new(struct inode *inode) |
| { |
| int ret; |
| |
| /* System files are never "new" as they're written out by |
| * mkfs. This helps us early during mount, before we have the |
| * journal open and j_trans_id could be junk. */ |
| if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) |
| return 0; |
| spin_lock(&trans_inc_lock); |
| ret = !(time_after(OCFS2_SB(inode->i_sb)->journal->j_trans_id, |
| OCFS2_I(inode)->ip_created_trans)); |
| if (!ret) |
| OCFS2_I(inode)->ip_created_trans = 0; |
| spin_unlock(&trans_inc_lock); |
| return ret; |
| } |
| |
| static inline void ocfs2_inode_set_new(struct ocfs2_super *osb, |
| struct inode *inode) |
| { |
| spin_lock(&trans_inc_lock); |
| OCFS2_I(inode)->ip_created_trans = osb->journal->j_trans_id; |
| spin_unlock(&trans_inc_lock); |
| } |
| |
| extern kmem_cache_t *ocfs2_lock_cache; |
| |
| struct ocfs2_journal_lock { |
| struct inode *jl_inode; |
| struct list_head jl_lock_list; |
| }; |
| |
| struct ocfs2_journal_handle { |
| handle_t *k_handle; /* kernel handle. */ |
| struct ocfs2_journal *journal; |
| u32 flags; /* see flags below. */ |
| int max_buffs; /* Buffs reserved by this handle */ |
| |
| /* The following two fields are for ocfs2_handle_add_lock */ |
| int num_locks; |
| struct list_head locks; /* A bunch of locks to |
| * release on commit. This |
| * should be a list_head */ |
| |
| struct list_head inode_list; |
| }; |
| |
| #define OCFS2_HANDLE_STARTED 1 |
| /* should we sync-commit this handle? */ |
| #define OCFS2_HANDLE_SYNC 2 |
| static inline int ocfs2_handle_started(struct ocfs2_journal_handle *handle) |
| { |
| return handle->flags & OCFS2_HANDLE_STARTED; |
| } |
| |
| static inline void ocfs2_handle_set_sync(struct ocfs2_journal_handle *handle, int sync) |
| { |
| if (sync) |
| handle->flags |= OCFS2_HANDLE_SYNC; |
| else |
| handle->flags &= ~OCFS2_HANDLE_SYNC; |
| } |
| |
| /* Exported only for the journal struct init code in super.c. Do not call. */ |
| void ocfs2_complete_recovery(void *data); |
| |
| /* |
| * Journal Control: |
| * Initialize, Load, Shutdown, Wipe a journal. |
| * |
| * ocfs2_journal_init - Initialize journal structures in the OSB. |
| * ocfs2_journal_load - Load the given journal off disk. Replay it if |
| * there's transactions still in there. |
| * ocfs2_journal_shutdown - Shutdown a journal, this will flush all |
| * uncommitted, uncheckpointed transactions. |
| * ocfs2_journal_wipe - Wipe transactions from a journal. Optionally |
| * zero out each block. |
| * ocfs2_recovery_thread - Perform recovery on a node. osb is our own osb. |
| * ocfs2_mark_dead_nodes - Start recovery on nodes we won't get a heartbeat |
| * event on. |
| * ocfs2_start_checkpoint - Kick the commit thread to do a checkpoint. |
| */ |
| void ocfs2_set_journal_params(struct ocfs2_super *osb); |
| int ocfs2_journal_init(struct ocfs2_journal *journal, |
| int *dirty); |
| void ocfs2_journal_shutdown(struct ocfs2_super *osb); |
| int ocfs2_journal_wipe(struct ocfs2_journal *journal, |
| int full); |
| int ocfs2_journal_load(struct ocfs2_journal *journal); |
| int ocfs2_check_journals_nolocks(struct ocfs2_super *osb); |
| void ocfs2_recovery_thread(struct ocfs2_super *osb, |
| int node_num); |
| int ocfs2_mark_dead_nodes(struct ocfs2_super *osb); |
| void ocfs2_complete_mount_recovery(struct ocfs2_super *osb); |
| |
| static inline void ocfs2_start_checkpoint(struct ocfs2_super *osb) |
| { |
| atomic_set(&osb->needs_checkpoint, 1); |
| wake_up(&osb->checkpoint_event); |
| } |
| |
| static inline void ocfs2_checkpoint_inode(struct inode *inode) |
| { |
| struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); |
| |
| if (!ocfs2_inode_fully_checkpointed(inode)) { |
| /* WARNING: This only kicks off a single |
| * checkpoint. If someone races you and adds more |
| * metadata to the journal, you won't know, and will |
| * wind up waiting *alot* longer than necessary. Right |
| * now we only use this in clear_inode so that's |
| * OK. */ |
| ocfs2_start_checkpoint(osb); |
| |
| wait_event(osb->journal->j_checkpointed, |
| ocfs2_inode_fully_checkpointed(inode)); |
| } |
| } |
| |
| /* |
| * Transaction Handling: |
| * Manage the lifetime of a transaction handle. |
| * |
| * ocfs2_alloc_handle - Only allocate a handle so we can start putting |
| * cluster locks on it. To actually change blocks, |
| * call ocfs2_start_trans with the handle returned |
| * from this function. You may call ocfs2_commit_trans |
| * at any time in the lifetime of a handle. |
| * ocfs2_start_trans - Begin a transaction. Give it an upper estimate of |
| * the number of blocks that will be changed during |
| * this handle. |
| * ocfs2_commit_trans - Complete a handle. |
| * ocfs2_extend_trans - Extend a handle by nblocks credits. This may |
| * commit the handle to disk in the process, but will |
| * not release any locks taken during the transaction. |
| * ocfs2_journal_access - Notify the handle that we want to journal this |
| * buffer. Will have to call ocfs2_journal_dirty once |
| * we've actually dirtied it. Type is one of . or . |
| * ocfs2_journal_dirty - Mark a journalled buffer as having dirty data. |
| * ocfs2_journal_dirty_data - Indicate that a data buffer should go out before |
| * the current handle commits. |
| * ocfs2_handle_add_lock - Sometimes we need to delay lock release |
| * until after a transaction has been completed. Use |
| * ocfs2_handle_add_lock to indicate that a lock needs |
| * to be released at the end of that handle. Locks |
| * will be released in the order that they are added. |
| * ocfs2_handle_add_inode - Add a locked inode to a transaction. |
| */ |
| |
| /* You must always start_trans with a number of buffs > 0, but it's |
| * perfectly legal to go through an entire transaction without having |
| * dirtied any buffers. */ |
| struct ocfs2_journal_handle *ocfs2_alloc_handle(struct ocfs2_super *osb); |
| struct ocfs2_journal_handle *ocfs2_start_trans(struct ocfs2_super *osb, |
| struct ocfs2_journal_handle *handle, |
| int max_buffs); |
| void ocfs2_commit_trans(struct ocfs2_journal_handle *handle); |
| int ocfs2_extend_trans(struct ocfs2_journal_handle *handle, |
| int nblocks); |
| |
| /* |
| * Create access is for when we get a newly created buffer and we're |
| * not gonna read it off disk, but rather fill it ourselves. Right |
| * now, we don't do anything special with this (it turns into a write |
| * request), but this is a good placeholder in case we do... |
| * |
| * Write access is for when we read a block off disk and are going to |
| * modify it. This way the journalling layer knows it may need to make |
| * a copy of that block (if it's part of another, uncommitted |
| * transaction) before we do so. |
| */ |
| #define OCFS2_JOURNAL_ACCESS_CREATE 0 |
| #define OCFS2_JOURNAL_ACCESS_WRITE 1 |
| #define OCFS2_JOURNAL_ACCESS_UNDO 2 |
| |
| int ocfs2_journal_access(struct ocfs2_journal_handle *handle, |
| struct inode *inode, |
| struct buffer_head *bh, |
| int type); |
| /* |
| * A word about the journal_access/journal_dirty "dance". It is |
| * entirely legal to journal_access a buffer more than once (as long |
| * as the access type is the same -- I'm not sure what will happen if |
| * access type is different but this should never happen anyway) It is |
| * also legal to journal_dirty a buffer more than once. In fact, you |
| * can even journal_access a buffer after you've done a |
| * journal_access/journal_dirty pair. The only thing you cannot do |
| * however, is journal_dirty a buffer which you haven't yet passed to |
| * journal_access at least once. |
| * |
| * That said, 99% of the time this doesn't matter and this is what the |
| * path looks like: |
| * |
| * <read a bh> |
| * ocfs2_journal_access(handle, bh, OCFS2_JOURNAL_ACCESS_WRITE); |
| * <modify the bh> |
| * ocfs2_journal_dirty(handle, bh); |
| */ |
| int ocfs2_journal_dirty(struct ocfs2_journal_handle *handle, |
| struct buffer_head *bh); |
| int ocfs2_journal_dirty_data(handle_t *handle, |
| struct buffer_head *bh); |
| int ocfs2_handle_add_lock(struct ocfs2_journal_handle *handle, |
| struct inode *inode); |
| /* |
| * Use this to protect from other processes reading buffer state while |
| * it's in flight. |
| */ |
| void ocfs2_handle_add_inode(struct ocfs2_journal_handle *handle, |
| struct inode *inode); |
| |
| /* |
| * Credit Macros: |
| * Convenience macros to calculate number of credits needed. |
| * |
| * For convenience sake, I have a set of macros here which calculate |
| * the *maximum* number of sectors which will be changed for various |
| * metadata updates. |
| */ |
| |
| /* simple file updates like chmod, etc. */ |
| #define OCFS2_INODE_UPDATE_CREDITS 1 |
| |
| /* get one bit out of a suballocator: dinode + group descriptor + |
| * prev. group desc. if we relink. */ |
| #define OCFS2_SUBALLOC_ALLOC (3) |
| |
| /* dinode + group descriptor update. We don't relink on free yet. */ |
| #define OCFS2_SUBALLOC_FREE (2) |
| |
| #define OCFS2_TRUNCATE_LOG_UPDATE OCFS2_INODE_UPDATE_CREDITS |
| #define OCFS2_TRUNCATE_LOG_FLUSH_ONE_REC (OCFS2_SUBALLOC_FREE \ |
| + OCFS2_TRUNCATE_LOG_UPDATE) |
| |
| /* data block for new dir/symlink, 2 for bitmap updates (bitmap fe + |
| * bitmap block for the new bit) */ |
| #define OCFS2_DIR_LINK_ADDITIONAL_CREDITS (1 + 2) |
| |
| /* parent fe, parent block, new file entry, inode alloc fe, inode alloc |
| * group descriptor + mkdir/symlink blocks */ |
| #define OCFS2_MKNOD_CREDITS (3 + OCFS2_SUBALLOC_ALLOC \ |
| + OCFS2_DIR_LINK_ADDITIONAL_CREDITS) |
| |
| /* local alloc metadata change + main bitmap updates */ |
| #define OCFS2_WINDOW_MOVE_CREDITS (OCFS2_INODE_UPDATE_CREDITS \ |
| + OCFS2_SUBALLOC_ALLOC + OCFS2_SUBALLOC_FREE) |
| |
| /* used when we don't need an allocation change for a dir extend. One |
| * for the dinode, one for the new block. */ |
| #define OCFS2_SIMPLE_DIR_EXTEND_CREDITS (2) |
| |
| /* file update (nlink, etc) + dir entry block */ |
| #define OCFS2_LINK_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1) |
| |
| /* inode + dir inode (if we unlink a dir), + dir entry block + orphan |
| * dir inode link */ |
| #define OCFS2_UNLINK_CREDITS (2 * OCFS2_INODE_UPDATE_CREDITS + 1 \ |
| + OCFS2_LINK_CREDITS) |
| |
| /* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry + |
| * inode alloc group descriptor */ |
| #define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 1 + 1) |
| |
| /* dinode update, old dir dinode update, new dir dinode update, old |
| * dir dir entry, new dir dir entry, dir entry update for renaming |
| * directory + target unlink */ |
| #define OCFS2_RENAME_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3 \ |
| + OCFS2_UNLINK_CREDITS) |
| |
| static inline int ocfs2_calc_extend_credits(struct super_block *sb, |
| struct ocfs2_dinode *fe, |
| u32 bits_wanted) |
| { |
| int bitmap_blocks, sysfile_bitmap_blocks, dinode_blocks; |
| |
| /* bitmap dinode, group desc. + relinked group. */ |
| bitmap_blocks = OCFS2_SUBALLOC_ALLOC; |
| |
| /* we might need to shift tree depth so lets assume an |
| * absolute worst case of complete fragmentation. Even with |
| * that, we only need one update for the dinode, and then |
| * however many metadata chunks needed * a remaining suballoc |
| * alloc. */ |
| sysfile_bitmap_blocks = 1 + |
| (OCFS2_SUBALLOC_ALLOC - 1) * ocfs2_extend_meta_needed(fe); |
| |
| /* this does not include *new* metadata blocks, which are |
| * accounted for in sysfile_bitmap_blocks. fe + |
| * prev. last_eb_blk + blocks along edge of tree. |
| * calc_symlink_credits passes because we just need 1 |
| * credit for the dinode there. */ |
| dinode_blocks = 1 + 1 + le16_to_cpu(fe->id2.i_list.l_tree_depth); |
| |
| return bitmap_blocks + sysfile_bitmap_blocks + dinode_blocks; |
| } |
| |
| static inline int ocfs2_calc_symlink_credits(struct super_block *sb) |
| { |
| int blocks = OCFS2_MKNOD_CREDITS; |
| |
| /* links can be longer than one block so we may update many |
| * within our single allocated extent. */ |
| blocks += ocfs2_clusters_to_blocks(sb, 1); |
| |
| return blocks; |
| } |
| |
| static inline int ocfs2_calc_group_alloc_credits(struct super_block *sb, |
| unsigned int cpg) |
| { |
| int blocks; |
| int bitmap_blocks = OCFS2_SUBALLOC_ALLOC + 1; |
| /* parent inode update + new block group header + bitmap inode update |
| + bitmap blocks affected */ |
| blocks = 1 + 1 + 1 + bitmap_blocks; |
| return blocks; |
| } |
| |
| static inline int ocfs2_calc_tree_trunc_credits(struct super_block *sb, |
| unsigned int clusters_to_del, |
| struct ocfs2_dinode *fe, |
| struct ocfs2_extent_list *last_el) |
| { |
| /* for dinode + all headers in this pass + update to next leaf */ |
| u16 next_free = le16_to_cpu(last_el->l_next_free_rec); |
| u16 tree_depth = le16_to_cpu(fe->id2.i_list.l_tree_depth); |
| int credits = 1 + tree_depth + 1; |
| int i; |
| |
| i = next_free - 1; |
| BUG_ON(i < 0); |
| |
| /* We may be deleting metadata blocks, so metadata alloc dinode + |
| one desc. block for each possible delete. */ |
| if (tree_depth && next_free == 1 && |
| le32_to_cpu(last_el->l_recs[i].e_clusters) == clusters_to_del) |
| credits += 1 + tree_depth; |
| |
| /* update to the truncate log. */ |
| credits += OCFS2_TRUNCATE_LOG_UPDATE; |
| |
| return credits; |
| } |
| |
| #endif /* OCFS2_JOURNAL_H */ |