| /* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/time.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/semaphore.h> |
| #include <linux/uaccess.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <asm/system.h> |
| #include <asm/mach-types.h> |
| #include <mach/hardware.h> |
| #include <mach/gpio.h> |
| #include <mach/clk.h> |
| |
| #include "msm_fb.h" |
| #include "mipi_dsi.h" |
| #include "mdp.h" |
| #include "mdp4.h" |
| |
| u32 dsi_irq; |
| |
| static boolean tlmm_settings = FALSE; |
| |
| static int mipi_dsi_probe(struct platform_device *pdev); |
| static int mipi_dsi_remove(struct platform_device *pdev); |
| |
| static int mipi_dsi_off(struct platform_device *pdev); |
| static int mipi_dsi_on(struct platform_device *pdev); |
| |
| static struct platform_device *pdev_list[MSM_FB_MAX_DEV_LIST]; |
| static int pdev_list_cnt; |
| static struct mipi_dsi_platform_data *mipi_dsi_pdata; |
| |
| static int vsync_gpio = -1; |
| |
| static struct platform_driver mipi_dsi_driver = { |
| .probe = mipi_dsi_probe, |
| .remove = mipi_dsi_remove, |
| .shutdown = NULL, |
| .driver = { |
| .name = "mipi_dsi", |
| }, |
| }; |
| |
| struct device dsi_dev; |
| |
| static int mipi_dsi_off(struct platform_device *pdev) |
| { |
| int ret = 0; |
| struct msm_fb_data_type *mfd; |
| struct msm_panel_info *pinfo; |
| |
| mfd = platform_get_drvdata(pdev); |
| pinfo = &mfd->panel_info; |
| |
| if (mdp_rev >= MDP_REV_41) |
| mutex_lock(&mfd->dma->ov_mutex); |
| else |
| down(&mfd->dma->mutex); |
| |
| mdp4_overlay_dsi_state_set(ST_DSI_SUSPEND); |
| |
| /* |
| * Description: dsi clock is need to perform shutdown. |
| * mdp4_dsi_cmd_dma_busy_wait() will enable dsi clock if disabled. |
| * also, wait until dma (overlay and dmap) finish. |
| */ |
| if (mfd->panel_info.type == MIPI_CMD_PANEL) { |
| if (mdp_rev >= MDP_REV_41) { |
| mdp4_dsi_cmd_dma_busy_wait(mfd); |
| mdp4_dsi_blt_dmap_busy_wait(mfd); |
| } else { |
| mdp3_dsi_cmd_dma_busy_wait(mfd); |
| } |
| } |
| |
| /* |
| * Desctiption: change to DSI_CMD_MODE since it needed to |
| * tx DCS dsiplay off comamnd to panel |
| */ |
| mipi_dsi_op_mode_config(DSI_CMD_MODE); |
| |
| if (mfd->panel_info.type == MIPI_CMD_PANEL) { |
| if (pinfo->lcd.vsync_enable) { |
| if (pinfo->lcd.hw_vsync_mode && vsync_gpio > 0) { |
| if (MDP_REV_303 != mdp_rev) |
| gpio_free(vsync_gpio); |
| } |
| mipi_dsi_set_tear_off(mfd); |
| } |
| } |
| |
| ret = panel_next_off(pdev); |
| |
| #ifdef CONFIG_MSM_BUS_SCALING |
| mdp_bus_scale_update_request(0); |
| #endif |
| /* disbale dsi engine */ |
| MIPI_OUTP(MIPI_DSI_BASE + 0x0000, 0); |
| |
| mipi_dsi_phy_ctrl(0); |
| |
| local_bh_disable(); |
| mipi_dsi_clk_disable(); |
| local_bh_enable(); |
| |
| if (mipi_dsi_pdata && mipi_dsi_pdata->dsi_power_save) |
| mipi_dsi_pdata->dsi_power_save(0); |
| |
| if (mdp_rev >= MDP_REV_41) |
| mutex_unlock(&mfd->dma->ov_mutex); |
| else |
| up(&mfd->dma->mutex); |
| |
| pr_debug("%s:\n", __func__); |
| |
| return ret; |
| } |
| |
| static int mipi_dsi_on(struct platform_device *pdev) |
| { |
| int ret = 0; |
| u32 clk_rate; |
| struct msm_fb_data_type *mfd; |
| struct fb_info *fbi; |
| struct fb_var_screeninfo *var; |
| struct msm_panel_info *pinfo; |
| struct mipi_panel_info *mipi; |
| u32 hbp, hfp, vbp, vfp, hspw, vspw, width, height; |
| u32 ystride, bpp, data; |
| u32 dummy_xres, dummy_yres; |
| int target_type = 0; |
| |
| mfd = platform_get_drvdata(pdev); |
| fbi = mfd->fbi; |
| var = &fbi->var; |
| pinfo = &mfd->panel_info; |
| |
| if (mipi_dsi_pdata && mipi_dsi_pdata->dsi_power_save) |
| mipi_dsi_pdata->dsi_power_save(1); |
| |
| clk_rate = mfd->fbi->var.pixclock; |
| clk_rate = min(clk_rate, mfd->panel_info.clk_max); |
| |
| local_bh_disable(); |
| mipi_dsi_clk_enable(); |
| local_bh_enable(); |
| |
| #ifndef CONFIG_FB_MSM_MDP303 |
| mdp4_overlay_dsi_state_set(ST_DSI_RESUME); |
| #endif |
| |
| MIPI_OUTP(MIPI_DSI_BASE + 0x114, 1); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x114, 0); |
| |
| hbp = var->left_margin; |
| hfp = var->right_margin; |
| vbp = var->upper_margin; |
| vfp = var->lower_margin; |
| hspw = var->hsync_len; |
| vspw = var->vsync_len; |
| width = mfd->panel_info.xres; |
| height = mfd->panel_info.yres; |
| |
| mipi_dsi_phy_ctrl(1); |
| |
| if (mdp_rev == MDP_REV_42 && mipi_dsi_pdata) |
| target_type = mipi_dsi_pdata->target_type; |
| |
| mipi_dsi_phy_init(0, &(mfd->panel_info), target_type); |
| |
| mipi = &mfd->panel_info.mipi; |
| if (mfd->panel_info.type == MIPI_VIDEO_PANEL) { |
| dummy_xres = mfd->panel_info.mipi.xres_pad; |
| dummy_yres = mfd->panel_info.mipi.yres_pad; |
| |
| if (mdp_rev >= MDP_REV_41) { |
| MIPI_OUTP(MIPI_DSI_BASE + 0x20, |
| ((hspw + hbp + width + dummy_xres) << 16 | |
| (hspw + hbp))); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x24, |
| ((vspw + vbp + height + dummy_yres) << 16 | |
| (vspw + vbp))); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x28, |
| (vspw + vbp + height + dummy_yres + |
| vfp - 1) << 16 | (hspw + hbp + |
| width + dummy_xres + hfp - 1)); |
| } else { |
| /* DSI_LAN_SWAP_CTRL */ |
| MIPI_OUTP(MIPI_DSI_BASE + 0x00ac, mipi->dlane_swap); |
| |
| MIPI_OUTP(MIPI_DSI_BASE + 0x20, |
| ((hbp + width + dummy_xres) << 16 | (hbp))); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x24, |
| ((vbp + height + dummy_yres) << 16 | (vbp))); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x28, |
| (vbp + height + dummy_yres + vfp) << 16 | |
| (hbp + width + dummy_xres + hfp)); |
| } |
| |
| MIPI_OUTP(MIPI_DSI_BASE + 0x2c, (hspw << 16)); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x30, 0); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x34, (vspw << 16)); |
| |
| } else { /* command mode */ |
| if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB888) |
| bpp = 3; |
| else if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB666) |
| bpp = 3; |
| else if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB565) |
| bpp = 2; |
| else |
| bpp = 3; /* Default format set to RGB888 */ |
| |
| ystride = width * bpp + 1; |
| |
| /* DSI_COMMAND_MODE_MDP_STREAM_CTRL */ |
| data = (ystride << 16) | (mipi->vc << 8) | DTYPE_DCS_LWRITE; |
| MIPI_OUTP(MIPI_DSI_BASE + 0x5c, data); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x54, data); |
| |
| /* DSI_COMMAND_MODE_MDP_STREAM_TOTAL */ |
| data = height << 16 | width; |
| MIPI_OUTP(MIPI_DSI_BASE + 0x60, data); |
| MIPI_OUTP(MIPI_DSI_BASE + 0x58, data); |
| } |
| |
| mipi_dsi_host_init(mipi); |
| |
| ret = panel_next_on(pdev); |
| |
| mipi_dsi_op_mode_config(mipi->mode); |
| |
| if (mfd->panel_info.type == MIPI_CMD_PANEL) { |
| if (pinfo->lcd.vsync_enable) { |
| if (pinfo->lcd.hw_vsync_mode && vsync_gpio > 0) { |
| if (mdp_rev >= MDP_REV_41) { |
| if (gpio_request(vsync_gpio, |
| "MDP_VSYNC") == 0) |
| gpio_direction_input( |
| vsync_gpio); |
| else |
| pr_err("%s: unable to \ |
| request gpio=%d\n", |
| __func__, vsync_gpio); |
| } else if (mdp_rev == MDP_REV_303) { |
| if (!tlmm_settings && gpio_request( |
| vsync_gpio, "MDP_VSYNC") == 0) { |
| ret = gpio_tlmm_config( |
| GPIO_CFG( |
| vsync_gpio, 1, |
| GPIO_CFG_INPUT, |
| GPIO_CFG_PULL_DOWN, |
| GPIO_CFG_2MA), |
| GPIO_CFG_ENABLE); |
| |
| if (ret) { |
| pr_err( |
| "%s: unable to config \ |
| tlmm = %d\n", |
| __func__, vsync_gpio); |
| } |
| tlmm_settings = TRUE; |
| |
| gpio_direction_input( |
| vsync_gpio); |
| } else { |
| if (!tlmm_settings) { |
| pr_err( |
| "%s: unable to request \ |
| gpio=%d\n", |
| __func__, vsync_gpio); |
| } |
| } |
| } |
| } |
| mipi_dsi_set_tear_on(mfd); |
| } |
| } |
| |
| #ifdef CONFIG_MSM_BUS_SCALING |
| mdp_bus_scale_update_request(2); |
| #endif |
| return ret; |
| } |
| |
| |
| static int mipi_dsi_resource_initialized; |
| |
| static int mipi_dsi_probe(struct platform_device *pdev) |
| { |
| struct msm_fb_data_type *mfd; |
| struct fb_info *fbi; |
| struct msm_panel_info *pinfo; |
| struct mipi_panel_info *mipi; |
| struct platform_device *mdp_dev = NULL; |
| struct msm_fb_panel_data *pdata = NULL; |
| int rc; |
| uint8 lanes = 0, bpp; |
| uint32 h_period, v_period, dsi_pclk_rate; |
| |
| resource_size_t size ; |
| |
| if ((pdev->id == 1) && (pdev->num_resources >= 0)) { |
| mipi_dsi_pdata = pdev->dev.platform_data; |
| |
| size = resource_size(&pdev->resource[0]); |
| mipi_dsi_base = ioremap(pdev->resource[0].start, size); |
| |
| MSM_FB_INFO("mipi_dsi base phy_addr = 0x%x virt = 0x%x\n", |
| pdev->resource[0].start, (int) mipi_dsi_base); |
| |
| if (!mipi_dsi_base) |
| return -ENOMEM; |
| |
| if (mdp_rev >= MDP_REV_41) { |
| mmss_sfpb_base = ioremap(MMSS_SFPB_BASE_PHY, 0x100); |
| MSM_FB_INFO("mmss_sfpb base phy_addr = 0x%x," |
| "virt = 0x%x\n", MMSS_SFPB_BASE_PHY, |
| (int) mmss_sfpb_base); |
| |
| if (!mmss_sfpb_base) |
| return -ENOMEM; |
| } |
| |
| dsi_irq = platform_get_irq(pdev, 0); |
| if (dsi_irq < 0) { |
| pr_err("mipi_dsi: can not get mdp irq\n"); |
| return -ENOMEM; |
| } |
| |
| rc = request_irq(dsi_irq, mipi_dsi_isr, IRQF_DISABLED, |
| "MIPI_DSI", 0); |
| if (rc) { |
| pr_err("mipi_dsi_host request_irq() failed!\n"); |
| return rc; |
| } |
| |
| disable_irq(dsi_irq); |
| |
| if (mdp_rev == MDP_REV_42 && mipi_dsi_pdata && |
| mipi_dsi_pdata->target_type == 1) { |
| /* Target type is 1 for device with (De)serializer |
| * 0x4f00000 is the base for TV Encoder. |
| * Unused Offset 0x1000 is used for |
| * (de)serializer on emulation platform |
| */ |
| periph_base = ioremap(MMSS_SERDES_BASE_PHY, 0x100); |
| |
| if (periph_base) { |
| pr_debug("periph_base %p\n", periph_base); |
| writel(0x4, periph_base + 0x28); |
| writel(0xc, periph_base + 0x28); |
| } else { |
| pr_err("periph_base is NULL\n"); |
| free_irq(dsi_irq, 0); |
| return -ENOMEM; |
| } |
| } |
| |
| if (mipi_dsi_pdata) { |
| vsync_gpio = mipi_dsi_pdata->vsync_gpio; |
| pr_debug("%s: vsync_gpio=%d\n", __func__, vsync_gpio); |
| |
| if (mdp_rev == MDP_REV_303 && |
| mipi_dsi_pdata->dsi_client_reset) { |
| if (mipi_dsi_pdata->dsi_client_reset()) |
| pr_err("%s: DSI Client Reset failed!\n", |
| __func__); |
| else |
| pr_debug("%s: DSI Client Reset success\n", |
| __func__); |
| } |
| } |
| |
| mipi_dsi_resource_initialized = 1; |
| |
| return 0; |
| } |
| |
| mipi_dsi_clk_init(&pdev->dev); |
| |
| if (!mipi_dsi_resource_initialized) |
| return -EPERM; |
| |
| mfd = platform_get_drvdata(pdev); |
| |
| if (!mfd) |
| return -ENODEV; |
| |
| if (mfd->key != MFD_KEY) |
| return -EINVAL; |
| |
| if (pdev_list_cnt >= MSM_FB_MAX_DEV_LIST) |
| return -ENOMEM; |
| |
| |
| mdp_dev = platform_device_alloc("mdp", pdev->id); |
| if (!mdp_dev) |
| return -ENOMEM; |
| |
| /* |
| * link to the latest pdev |
| */ |
| mfd->pdev = mdp_dev; |
| mfd->dest = DISPLAY_LCD; |
| |
| /* |
| * alloc panel device data |
| */ |
| if (platform_device_add_data |
| (mdp_dev, pdev->dev.platform_data, |
| sizeof(struct msm_fb_panel_data))) { |
| pr_err("mipi_dsi_probe: platform_device_add_data failed!\n"); |
| platform_device_put(mdp_dev); |
| return -ENOMEM; |
| } |
| /* |
| * data chain |
| */ |
| pdata = mdp_dev->dev.platform_data; |
| pdata->on = mipi_dsi_on; |
| pdata->off = mipi_dsi_off; |
| pdata->next = pdev; |
| |
| /* |
| * get/set panel specific fb info |
| */ |
| mfd->panel_info = pdata->panel_info; |
| pinfo = &mfd->panel_info; |
| |
| if (mdp_rev == MDP_REV_303 && |
| mipi_dsi_pdata->get_lane_config) { |
| if (mipi_dsi_pdata->get_lane_config() != 2) { |
| pr_info("Changing to DSI Single Mode Configuration\n"); |
| #ifdef CONFIG_FB_MSM_MDP303 |
| update_lane_config(pinfo); |
| #endif |
| } |
| } |
| |
| if (mfd->index == 0) |
| mfd->fb_imgType = MSMFB_DEFAULT_TYPE; |
| else |
| mfd->fb_imgType = MDP_RGB_565; |
| |
| fbi = mfd->fbi; |
| fbi->var.pixclock = mfd->panel_info.clk_rate; |
| fbi->var.left_margin = mfd->panel_info.lcdc.h_back_porch; |
| fbi->var.right_margin = mfd->panel_info.lcdc.h_front_porch; |
| fbi->var.upper_margin = mfd->panel_info.lcdc.v_back_porch; |
| fbi->var.lower_margin = mfd->panel_info.lcdc.v_front_porch; |
| fbi->var.hsync_len = mfd->panel_info.lcdc.h_pulse_width; |
| fbi->var.vsync_len = mfd->panel_info.lcdc.v_pulse_width; |
| |
| h_period = ((mfd->panel_info.lcdc.h_pulse_width) |
| + (mfd->panel_info.lcdc.h_back_porch) |
| + (mfd->panel_info.xres) |
| + (mfd->panel_info.lcdc.h_front_porch)); |
| |
| v_period = ((mfd->panel_info.lcdc.v_pulse_width) |
| + (mfd->panel_info.lcdc.v_back_porch) |
| + (mfd->panel_info.yres) |
| + (mfd->panel_info.lcdc.v_front_porch)); |
| |
| mipi = &mfd->panel_info.mipi; |
| |
| if (mipi->data_lane3) |
| lanes += 1; |
| if (mipi->data_lane2) |
| lanes += 1; |
| if (mipi->data_lane1) |
| lanes += 1; |
| if (mipi->data_lane0) |
| lanes += 1; |
| |
| if ((mipi->dst_format == DSI_CMD_DST_FORMAT_RGB888) |
| || (mipi->dst_format == DSI_VIDEO_DST_FORMAT_RGB888) |
| || (mipi->dst_format == DSI_VIDEO_DST_FORMAT_RGB666_LOOSE)) |
| bpp = 3; |
| else if ((mipi->dst_format == DSI_CMD_DST_FORMAT_RGB565) |
| || (mipi->dst_format == DSI_VIDEO_DST_FORMAT_RGB565)) |
| bpp = 2; |
| else |
| bpp = 3; /* Default format set to RGB888 */ |
| |
| if (mfd->panel_info.type == MIPI_VIDEO_PANEL && |
| !mfd->panel_info.clk_rate) { |
| h_period += mfd->panel_info.mipi.xres_pad; |
| v_period += mfd->panel_info.mipi.yres_pad; |
| |
| if (lanes > 0) { |
| mfd->panel_info.clk_rate = |
| ((h_period * v_period * (mipi->frame_rate) * bpp * 8) |
| / lanes); |
| } else { |
| pr_err("%s: forcing mipi_dsi lanes to 1\n", __func__); |
| mfd->panel_info.clk_rate = |
| (h_period * v_period |
| * (mipi->frame_rate) * bpp * 8); |
| } |
| } |
| pll_divider_config.clk_rate = mfd->panel_info.clk_rate; |
| |
| rc = mipi_dsi_clk_div_config(bpp, lanes, &dsi_pclk_rate); |
| if (rc) |
| goto mipi_dsi_probe_err; |
| |
| if ((dsi_pclk_rate < 3300000) || (dsi_pclk_rate > 103300000)) |
| dsi_pclk_rate = 35000000; |
| mipi->dsi_pclk_rate = dsi_pclk_rate; |
| |
| /* |
| * set driver data |
| */ |
| platform_set_drvdata(mdp_dev, mfd); |
| |
| /* |
| * register in mdp driver |
| */ |
| rc = platform_device_add(mdp_dev); |
| if (rc) |
| goto mipi_dsi_probe_err; |
| |
| pdev_list[pdev_list_cnt++] = pdev; |
| |
| return 0; |
| |
| mipi_dsi_probe_err: |
| platform_device_put(mdp_dev); |
| return rc; |
| } |
| |
| static int mipi_dsi_remove(struct platform_device *pdev) |
| { |
| struct msm_fb_data_type *mfd; |
| |
| mfd = platform_get_drvdata(pdev); |
| iounmap(mipi_dsi_base); |
| return 0; |
| } |
| |
| static int mipi_dsi_register_driver(void) |
| { |
| return platform_driver_register(&mipi_dsi_driver); |
| } |
| |
| static int __init mipi_dsi_driver_init(void) |
| { |
| int ret; |
| |
| mipi_dsi_init(); |
| |
| ret = mipi_dsi_register_driver(); |
| |
| device_initialize(&dsi_dev); |
| |
| if (ret) { |
| pr_err("mipi_dsi_register_driver() failed!\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| module_init(mipi_dsi_driver_init); |