| /* |
| * linux/drivers/mtd/onenand/onenand_sim.c |
| * |
| * The OneNAND simulator |
| * |
| * Copyright © 2005-2007 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * |
| * Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com> |
| * Flex-OneNAND simulator support |
| * Copyright (C) Samsung Electronics, 2008 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/vmalloc.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/onenand.h> |
| |
| #include <linux/io.h> |
| |
| #ifndef CONFIG_ONENAND_SIM_MANUFACTURER |
| #define CONFIG_ONENAND_SIM_MANUFACTURER 0xec |
| #endif |
| |
| #ifndef CONFIG_ONENAND_SIM_DEVICE_ID |
| #define CONFIG_ONENAND_SIM_DEVICE_ID 0x04 |
| #endif |
| |
| #define CONFIG_FLEXONENAND ((CONFIG_ONENAND_SIM_DEVICE_ID >> 9) & 1) |
| |
| #ifndef CONFIG_ONENAND_SIM_VERSION_ID |
| #define CONFIG_ONENAND_SIM_VERSION_ID 0x1e |
| #endif |
| |
| #ifndef CONFIG_ONENAND_SIM_TECHNOLOGY_ID |
| #define CONFIG_ONENAND_SIM_TECHNOLOGY_ID CONFIG_FLEXONENAND |
| #endif |
| |
| /* Initial boundary values for Flex-OneNAND Simulator */ |
| #ifndef CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY |
| #define CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY 0x01 |
| #endif |
| |
| #ifndef CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY |
| #define CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY 0x01 |
| #endif |
| |
| static int manuf_id = CONFIG_ONENAND_SIM_MANUFACTURER; |
| static int device_id = CONFIG_ONENAND_SIM_DEVICE_ID; |
| static int version_id = CONFIG_ONENAND_SIM_VERSION_ID; |
| static int technology_id = CONFIG_ONENAND_SIM_TECHNOLOGY_ID; |
| static int boundary[] = { |
| CONFIG_FLEXONENAND_SIM_DIE0_BOUNDARY, |
| CONFIG_FLEXONENAND_SIM_DIE1_BOUNDARY, |
| }; |
| |
| struct onenand_flash { |
| void __iomem *base; |
| void __iomem *data; |
| }; |
| |
| #define ONENAND_CORE(flash) (flash->data) |
| #define ONENAND_CORE_SPARE(flash, this, offset) \ |
| ((flash->data) + (this->chipsize) + (offset >> 5)) |
| |
| #define ONENAND_MAIN_AREA(this, offset) \ |
| (this->base + ONENAND_DATARAM + offset) |
| |
| #define ONENAND_SPARE_AREA(this, offset) \ |
| (this->base + ONENAND_SPARERAM + offset) |
| |
| #define ONENAND_GET_WP_STATUS(this) \ |
| (readw(this->base + ONENAND_REG_WP_STATUS)) |
| |
| #define ONENAND_SET_WP_STATUS(v, this) \ |
| (writew(v, this->base + ONENAND_REG_WP_STATUS)) |
| |
| /* It has all 0xff chars */ |
| #define MAX_ONENAND_PAGESIZE (4096 + 128) |
| static unsigned char *ffchars; |
| |
| #if CONFIG_FLEXONENAND |
| #define PARTITION_NAME "Flex-OneNAND simulator partition" |
| #else |
| #define PARTITION_NAME "OneNAND simulator partition" |
| #endif |
| |
| static struct mtd_partition os_partitions[] = { |
| { |
| .name = PARTITION_NAME, |
| .offset = 0, |
| .size = MTDPART_SIZ_FULL, |
| }, |
| }; |
| |
| /* |
| * OneNAND simulator mtd |
| */ |
| struct onenand_info { |
| struct mtd_info mtd; |
| struct mtd_partition *parts; |
| struct onenand_chip onenand; |
| struct onenand_flash flash; |
| }; |
| |
| static struct onenand_info *info; |
| |
| #define DPRINTK(format, args...) \ |
| do { \ |
| printk(KERN_DEBUG "%s[%d]: " format "\n", __func__, \ |
| __LINE__, ##args); \ |
| } while (0) |
| |
| /** |
| * onenand_lock_handle - Handle Lock scheme |
| * @this: OneNAND device structure |
| * @cmd: The command to be sent |
| * |
| * Send lock command to OneNAND device. |
| * The lock scheme depends on chip type. |
| */ |
| static void onenand_lock_handle(struct onenand_chip *this, int cmd) |
| { |
| int block_lock_scheme; |
| int status; |
| |
| status = ONENAND_GET_WP_STATUS(this); |
| block_lock_scheme = !(this->options & ONENAND_HAS_CONT_LOCK); |
| |
| switch (cmd) { |
| case ONENAND_CMD_UNLOCK: |
| case ONENAND_CMD_UNLOCK_ALL: |
| if (block_lock_scheme) |
| ONENAND_SET_WP_STATUS(ONENAND_WP_US, this); |
| else |
| ONENAND_SET_WP_STATUS(status | ONENAND_WP_US, this); |
| break; |
| |
| case ONENAND_CMD_LOCK: |
| if (block_lock_scheme) |
| ONENAND_SET_WP_STATUS(ONENAND_WP_LS, this); |
| else |
| ONENAND_SET_WP_STATUS(status | ONENAND_WP_LS, this); |
| break; |
| |
| case ONENAND_CMD_LOCK_TIGHT: |
| if (block_lock_scheme) |
| ONENAND_SET_WP_STATUS(ONENAND_WP_LTS, this); |
| else |
| ONENAND_SET_WP_STATUS(status | ONENAND_WP_LTS, this); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * onenand_bootram_handle - Handle BootRAM area |
| * @this: OneNAND device structure |
| * @cmd: The command to be sent |
| * |
| * Emulate BootRAM area. It is possible to do basic operation using BootRAM. |
| */ |
| static void onenand_bootram_handle(struct onenand_chip *this, int cmd) |
| { |
| switch (cmd) { |
| case ONENAND_CMD_READID: |
| writew(manuf_id, this->base); |
| writew(device_id, this->base + 2); |
| writew(version_id, this->base + 4); |
| break; |
| |
| default: |
| /* REVIST: Handle other commands */ |
| break; |
| } |
| } |
| |
| /** |
| * onenand_update_interrupt - Set interrupt register |
| * @this: OneNAND device structure |
| * @cmd: The command to be sent |
| * |
| * Update interrupt register. The status depends on command. |
| */ |
| static void onenand_update_interrupt(struct onenand_chip *this, int cmd) |
| { |
| int interrupt = ONENAND_INT_MASTER; |
| |
| switch (cmd) { |
| case ONENAND_CMD_READ: |
| case ONENAND_CMD_READOOB: |
| interrupt |= ONENAND_INT_READ; |
| break; |
| |
| case ONENAND_CMD_PROG: |
| case ONENAND_CMD_PROGOOB: |
| interrupt |= ONENAND_INT_WRITE; |
| break; |
| |
| case ONENAND_CMD_ERASE: |
| interrupt |= ONENAND_INT_ERASE; |
| break; |
| |
| case ONENAND_CMD_RESET: |
| interrupt |= ONENAND_INT_RESET; |
| break; |
| |
| default: |
| break; |
| } |
| |
| writew(interrupt, this->base + ONENAND_REG_INTERRUPT); |
| } |
| |
| /** |
| * onenand_check_overwrite - Check if over-write happened |
| * @dest: The destination pointer |
| * @src: The source pointer |
| * @count: The length to be check |
| * |
| * Returns: 0 on same, otherwise 1 |
| * |
| * Compare the source with destination |
| */ |
| static int onenand_check_overwrite(void *dest, void *src, size_t count) |
| { |
| unsigned int *s = (unsigned int *) src; |
| unsigned int *d = (unsigned int *) dest; |
| int i; |
| |
| count >>= 2; |
| for (i = 0; i < count; i++) |
| if ((*s++ ^ *d++) != 0) |
| return 1; |
| |
| return 0; |
| } |
| |
| /** |
| * onenand_data_handle - Handle OneNAND Core and DataRAM |
| * @this: OneNAND device structure |
| * @cmd: The command to be sent |
| * @dataram: Which dataram used |
| * @offset: The offset to OneNAND Core |
| * |
| * Copy data from OneNAND Core to DataRAM (read) |
| * Copy data from DataRAM to OneNAND Core (write) |
| * Erase the OneNAND Core (erase) |
| */ |
| static void onenand_data_handle(struct onenand_chip *this, int cmd, |
| int dataram, unsigned int offset) |
| { |
| struct mtd_info *mtd = &info->mtd; |
| struct onenand_flash *flash = this->priv; |
| int main_offset, spare_offset, die = 0; |
| void __iomem *src; |
| void __iomem *dest; |
| unsigned int i; |
| static int pi_operation; |
| int erasesize, rgn; |
| |
| if (dataram) { |
| main_offset = mtd->writesize; |
| spare_offset = mtd->oobsize; |
| } else { |
| main_offset = 0; |
| spare_offset = 0; |
| } |
| |
| if (pi_operation) { |
| die = readw(this->base + ONENAND_REG_START_ADDRESS2); |
| die >>= ONENAND_DDP_SHIFT; |
| } |
| |
| switch (cmd) { |
| case FLEXONENAND_CMD_PI_ACCESS: |
| pi_operation = 1; |
| break; |
| |
| case ONENAND_CMD_RESET: |
| pi_operation = 0; |
| break; |
| |
| case ONENAND_CMD_READ: |
| src = ONENAND_CORE(flash) + offset; |
| dest = ONENAND_MAIN_AREA(this, main_offset); |
| if (pi_operation) { |
| writew(boundary[die], this->base + ONENAND_DATARAM); |
| break; |
| } |
| memcpy(dest, src, mtd->writesize); |
| /* Fall through */ |
| |
| case ONENAND_CMD_READOOB: |
| src = ONENAND_CORE_SPARE(flash, this, offset); |
| dest = ONENAND_SPARE_AREA(this, spare_offset); |
| memcpy(dest, src, mtd->oobsize); |
| break; |
| |
| case ONENAND_CMD_PROG: |
| src = ONENAND_MAIN_AREA(this, main_offset); |
| dest = ONENAND_CORE(flash) + offset; |
| if (pi_operation) { |
| boundary[die] = readw(this->base + ONENAND_DATARAM); |
| break; |
| } |
| /* To handle partial write */ |
| for (i = 0; i < (1 << mtd->subpage_sft); i++) { |
| int off = i * this->subpagesize; |
| if (!memcmp(src + off, ffchars, this->subpagesize)) |
| continue; |
| if (memcmp(dest + off, ffchars, this->subpagesize) && |
| onenand_check_overwrite(dest + off, src + off, this->subpagesize)) |
| printk(KERN_ERR "over-write happened at 0x%08x\n", offset); |
| memcpy(dest + off, src + off, this->subpagesize); |
| } |
| /* Fall through */ |
| |
| case ONENAND_CMD_PROGOOB: |
| src = ONENAND_SPARE_AREA(this, spare_offset); |
| /* Check all data is 0xff chars */ |
| if (!memcmp(src, ffchars, mtd->oobsize)) |
| break; |
| |
| dest = ONENAND_CORE_SPARE(flash, this, offset); |
| if (memcmp(dest, ffchars, mtd->oobsize) && |
| onenand_check_overwrite(dest, src, mtd->oobsize)) |
| printk(KERN_ERR "OOB: over-write happened at 0x%08x\n", |
| offset); |
| memcpy(dest, src, mtd->oobsize); |
| break; |
| |
| case ONENAND_CMD_ERASE: |
| if (pi_operation) |
| break; |
| |
| if (FLEXONENAND(this)) { |
| rgn = flexonenand_region(mtd, offset); |
| erasesize = mtd->eraseregions[rgn].erasesize; |
| } else |
| erasesize = mtd->erasesize; |
| |
| memset(ONENAND_CORE(flash) + offset, 0xff, erasesize); |
| memset(ONENAND_CORE_SPARE(flash, this, offset), 0xff, |
| (erasesize >> 5)); |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * onenand_command_handle - Handle command |
| * @this: OneNAND device structure |
| * @cmd: The command to be sent |
| * |
| * Emulate OneNAND command. |
| */ |
| static void onenand_command_handle(struct onenand_chip *this, int cmd) |
| { |
| unsigned long offset = 0; |
| int block = -1, page = -1, bufferram = -1; |
| int dataram = 0; |
| |
| switch (cmd) { |
| case ONENAND_CMD_UNLOCK: |
| case ONENAND_CMD_LOCK: |
| case ONENAND_CMD_LOCK_TIGHT: |
| case ONENAND_CMD_UNLOCK_ALL: |
| onenand_lock_handle(this, cmd); |
| break; |
| |
| case ONENAND_CMD_BUFFERRAM: |
| /* Do nothing */ |
| return; |
| |
| default: |
| block = (int) readw(this->base + ONENAND_REG_START_ADDRESS1); |
| if (block & (1 << ONENAND_DDP_SHIFT)) { |
| block &= ~(1 << ONENAND_DDP_SHIFT); |
| /* The half of chip block */ |
| block += this->chipsize >> (this->erase_shift + 1); |
| } |
| if (cmd == ONENAND_CMD_ERASE) |
| break; |
| |
| page = (int) readw(this->base + ONENAND_REG_START_ADDRESS8); |
| page = (page >> ONENAND_FPA_SHIFT); |
| bufferram = (int) readw(this->base + ONENAND_REG_START_BUFFER); |
| bufferram >>= ONENAND_BSA_SHIFT; |
| bufferram &= ONENAND_BSA_DATARAM1; |
| dataram = (bufferram == ONENAND_BSA_DATARAM1) ? 1 : 0; |
| break; |
| } |
| |
| if (block != -1) |
| offset = onenand_addr(this, block); |
| |
| if (page != -1) |
| offset += page << this->page_shift; |
| |
| onenand_data_handle(this, cmd, dataram, offset); |
| |
| onenand_update_interrupt(this, cmd); |
| } |
| |
| /** |
| * onenand_writew - [OneNAND Interface] Emulate write operation |
| * @value: value to write |
| * @addr: address to write |
| * |
| * Write OneNAND register with value |
| */ |
| static void onenand_writew(unsigned short value, void __iomem * addr) |
| { |
| struct onenand_chip *this = info->mtd.priv; |
| |
| /* BootRAM handling */ |
| if (addr < this->base + ONENAND_DATARAM) { |
| onenand_bootram_handle(this, value); |
| return; |
| } |
| /* Command handling */ |
| if (addr == this->base + ONENAND_REG_COMMAND) |
| onenand_command_handle(this, value); |
| |
| writew(value, addr); |
| } |
| |
| /** |
| * flash_init - Initialize OneNAND simulator |
| * @flash: OneNAND simulator data strucutres |
| * |
| * Initialize OneNAND simulator. |
| */ |
| static int __init flash_init(struct onenand_flash *flash) |
| { |
| int density, size; |
| int buffer_size; |
| |
| flash->base = kzalloc(131072, GFP_KERNEL); |
| if (!flash->base) { |
| printk(KERN_ERR "Unable to allocate base address.\n"); |
| return -ENOMEM; |
| } |
| |
| density = device_id >> ONENAND_DEVICE_DENSITY_SHIFT; |
| density &= ONENAND_DEVICE_DENSITY_MASK; |
| size = ((16 << 20) << density); |
| |
| ONENAND_CORE(flash) = vmalloc(size + (size >> 5)); |
| if (!ONENAND_CORE(flash)) { |
| printk(KERN_ERR "Unable to allocate nand core address.\n"); |
| kfree(flash->base); |
| return -ENOMEM; |
| } |
| |
| memset(ONENAND_CORE(flash), 0xff, size + (size >> 5)); |
| |
| /* Setup registers */ |
| writew(manuf_id, flash->base + ONENAND_REG_MANUFACTURER_ID); |
| writew(device_id, flash->base + ONENAND_REG_DEVICE_ID); |
| writew(version_id, flash->base + ONENAND_REG_VERSION_ID); |
| writew(technology_id, flash->base + ONENAND_REG_TECHNOLOGY); |
| |
| if (density < 2 && (!CONFIG_FLEXONENAND)) |
| buffer_size = 0x0400; /* 1KiB page */ |
| else |
| buffer_size = 0x0800; /* 2KiB page */ |
| writew(buffer_size, flash->base + ONENAND_REG_DATA_BUFFER_SIZE); |
| |
| return 0; |
| } |
| |
| /** |
| * flash_exit - Clean up OneNAND simulator |
| * @flash: OneNAND simulator data structures |
| * |
| * Clean up OneNAND simulator. |
| */ |
| static void flash_exit(struct onenand_flash *flash) |
| { |
| vfree(ONENAND_CORE(flash)); |
| kfree(flash->base); |
| } |
| |
| static int __init onenand_sim_init(void) |
| { |
| /* Allocate all 0xff chars pointer */ |
| ffchars = kmalloc(MAX_ONENAND_PAGESIZE, GFP_KERNEL); |
| if (!ffchars) { |
| printk(KERN_ERR "Unable to allocate ff chars.\n"); |
| return -ENOMEM; |
| } |
| memset(ffchars, 0xff, MAX_ONENAND_PAGESIZE); |
| |
| /* Allocate OneNAND simulator mtd pointer */ |
| info = kzalloc(sizeof(struct onenand_info), GFP_KERNEL); |
| if (!info) { |
| printk(KERN_ERR "Unable to allocate core structures.\n"); |
| kfree(ffchars); |
| return -ENOMEM; |
| } |
| |
| /* Override write_word function */ |
| info->onenand.write_word = onenand_writew; |
| |
| if (flash_init(&info->flash)) { |
| printk(KERN_ERR "Unable to allocate flash.\n"); |
| kfree(ffchars); |
| kfree(info); |
| return -ENOMEM; |
| } |
| |
| info->parts = os_partitions; |
| |
| info->onenand.base = info->flash.base; |
| info->onenand.priv = &info->flash; |
| |
| info->mtd.name = "OneNAND simulator"; |
| info->mtd.priv = &info->onenand; |
| info->mtd.owner = THIS_MODULE; |
| |
| if (onenand_scan(&info->mtd, 1)) { |
| flash_exit(&info->flash); |
| kfree(ffchars); |
| kfree(info); |
| return -ENXIO; |
| } |
| |
| add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions)); |
| |
| return 0; |
| } |
| |
| static void __exit onenand_sim_exit(void) |
| { |
| struct onenand_chip *this = info->mtd.priv; |
| struct onenand_flash *flash = this->priv; |
| |
| onenand_release(&info->mtd); |
| flash_exit(flash); |
| kfree(ffchars); |
| kfree(info); |
| } |
| |
| module_init(onenand_sim_init); |
| module_exit(onenand_sim_exit); |
| |
| MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>"); |
| MODULE_DESCRIPTION("The OneNAND flash simulator"); |
| MODULE_LICENSE("GPL"); |