blob: 7eb5d81d5eec60cb80a8b149970ae60e6f38e362 [file] [log] [blame]
/*
* MPC8555 CDS Device Tree Source
*
* Copyright 2006 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8548@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <8000>; // L1, 32K
i-cache-size = <8000>; // L1, 32K
timebase-frequency = <0>; // 33 MHz, from uboot
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
};
};
memory {
device_type = "memory";
reg = <00000000 08000000>; // 128M at 0x0
};
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00100000>; // CCSRBAR 1M
bus-frequency = <0>;
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <3>;
device_type = "ethernet-phy";
};
};
ethernet@24000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
/* eTSEC 3/4 are currently broken
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <26000 1000>;
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <f 2 10 2 11 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
ethernet@27000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <27000 1000>;
local-mac-address = [ 00 E0 0C 00 73 03 ];
interrupts = <15 2 16 2 17 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
*/
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <&mpic>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <&mpic>;
};
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 &mpic 30 1
08000 0 0 2 &mpic 31 1
08000 0 0 3 &mpic 32 1
08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
08800 0 0 1 &mpic 30 1
08800 0 0 2 &mpic 31 1
08800 0 0 3 &mpic 32 1
08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 &mpic 30 1
09000 0 0 2 &mpic 31 1
09000 0 0 3 &mpic 32 1
09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 &mpic 31 1
09800 0 0 2 &mpic 32 1
09800 0 0 3 &mpic 33 1
09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 &mpic 32 1
0a000 0 0 2 &mpic 33 1
0a000 0 0 3 &mpic 30 1
0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 &mpic 33 1
0a800 0 0 2 &mpic 30 1
0a800 0 0 3 &mpic 31 1
0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 &mpic 30 1
19000 0 0 2 &mpic 31 1
19000 0 0 3 &mpic 32 1
19000 0 0 4 &mpic 33 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <8000 1000>;
compatible = "85xx";
device_type = "pci";
i8259@19000 {
clock-frequency = <0>;
interrupt-controller;
device_type = "interrupt-controller";
reg = <19000 0 0 0 1>;
#address-cells = <0>;
#interrupt-cells = <2>;
built-in;
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 &mpic 3b 1
a800 0 0 2 &mpic 3b 1
a800 0 0 3 &mpic 3b 1
a800 0 0 4 &mpic 3b 1>;
interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
01000000 0 00000000 e3000000 0 00100000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <9000 1000>;
compatible = "85xx";
device_type = "pci";
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
built-in;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
};
};