include/linux/mhl_defs.h - kernel/msm - Gitiles

 /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */
 #ifndef __MHL_SPEC_DEFS_H__
 #define __MHL_SPEC_DEFS_H__

 enum DevCapOffset_e {
 	DEVCAP_OFFSET_DEV_STATE         = 0x00,
 	DEVCAP_OFFSET_MHL_VERSION	= 0x01,
 	DEVCAP_OFFSET_DEV_CAT           = 0x02,
 	DEVCAP_OFFSET_ADOPTER_ID_H      = 0x03,
 	DEVCAP_OFFSET_ADOPTER_ID_L      = 0x04,
 	DEVCAP_OFFSET_VID_LINK_MODE     = 0x05,
 	DEVCAP_OFFSET_AUD_LINK_MODE     = 0x06,
 	DEVCAP_OFFSET_VIDEO_TYPE        = 0x07,
 	DEVCAP_OFFSET_LOG_DEV_MAP       = 0x08,
 	DEVCAP_OFFSET_BANDWIDTH         = 0x09,
 	DEVCAP_OFFSET_FEATURE_FLAG      = 0x0A,
 	DEVCAP_OFFSET_DEVICE_ID_H       = 0x0B,
 	DEVCAP_OFFSET_DEVICE_ID_L       = 0x0C,
 	DEVCAP_OFFSET_SCRATCHPAD_SIZE   = 0x0D,
 	DEVCAP_OFFSET_INT_STAT_SIZE     = 0x0E,
 	DEVCAP_OFFSET_RESERVED          = 0x0F,
 	/* this one must be last */
 	DEVCAP_SIZE
 };

 #ifndef __MHL_MSM_8334_REGS_H__
 #define __MHL_MSM_8334_REGS_H__

 #define BIT0                    0x01
 #define BIT1                    0x02
 #define BIT2                    0x04
 #define BIT3                    0x08
 #define BIT4                    0x10
 #define BIT5                    0x20
 #define BIT6                    0x40
 #define BIT7                    0x80

 #define LOW                     0
 #define HIGH                    1

 #define MAX_PAGES               8
 #endif


 /* Version that this chip supports*/
 /* bits 4..7 */
 #define	MHL_VER_MAJOR           (0x01 << 4)
 /* bits 0..3 */
 #define	MHL_VER_MINOR		0x01
 #define MHL_VERSION		(MHL_VER_MAJOR | MHL_VER_MINOR)

 /*Device Category*/
 #define	MHL_DEV_CATEGORY_OFFSET		DEVCAP_OFFSET_DEV_CAT
 #define	MHL_DEV_CATEGORY_POW_BIT	(BIT4)

 #define	MHL_DEV_CAT_SOURCE		0x02

 /*Video Link Mode*/
 #define	MHL_DEV_VID_LINK_SUPPRGB444		0x01
 #define	MHL_DEV_VID_LINK_SUPPYCBCR444		0x02
 #define	MHL_DEV_VID_LINK_SUPPYCBCR422		0x04
 #define	MHL_DEV_VID_LINK_SUPP_PPIXEL		0x08
 #define	MHL_DEV_VID_LINK_SUPP_ISLANDS		0x10

 /*Audio Link Mode Support*/
 #define	MHL_DEV_AUD_LINK_2CH				0x01
 #define	MHL_DEV_AUD_LINK_8CH				0x02


 /*Feature Flag in the devcap*/
 #define	MHL_DEV_FEATURE_FLAG_OFFSET		DEVCAP_OFFSET_FEATURE_FLAG
 /* Dongles have freedom to not support RCP */
 #define	MHL_FEATURE_RCP_SUPPORT				BIT0
 /* Dongles have freedom to not support RAP */
 #define	MHL_FEATURE_RAP_SUPPORT				BIT1
 /* Dongles have freedom to not support SCRATCHPAD */
 #define	MHL_FEATURE_SP_SUPPORT				BIT2

 /*Logical Dev Map*/
 #define	MHL_DEV_LD_DISPLAY					(0x01 << 0)
 #define	MHL_DEV_LD_VIDEO					(0x01 << 1)
 #define	MHL_DEV_LD_AUDIO					(0x01 << 2)
 #define	MHL_DEV_LD_MEDIA					(0x01 << 3)
 #define	MHL_DEV_LD_TUNER					(0x01 << 4)
 #define	MHL_DEV_LD_RECORD					(0x01 << 5)
 #define	MHL_DEV_LD_SPEAKER					(0x01 << 6)
 #define	MHL_DEV_LD_GUI						(0x01 << 7)

 /*Bandwidth*/
 /* 225 MHz */
 #define	MHL_BANDWIDTH_LIMIT					22


 #define MHL_STATUS_REG_CONNECTED_RDY        0x30
 #define MHL_STATUS_REG_LINK_MODE            0x31

 #define	MHL_STATUS_DCAP_RDY					BIT0

 #define MHL_STATUS_CLK_MODE_MASK            0x07
 #define MHL_STATUS_CLK_MODE_PACKED_PIXEL    0x02
 #define MHL_STATUS_CLK_MODE_NORMAL          0x03
 #define MHL_STATUS_PATH_EN_MASK             0x08
 #define MHL_STATUS_PATH_ENABLED             0x08
 #define MHL_STATUS_PATH_DISABLED            0x00
 #define MHL_STATUS_MUTED_MASK               0x10

 #define MHL_RCHANGE_INT                     0x20
 #define MHL_DCHANGE_INT                     0x21

 #define	MHL_INT_DCAP_CHG					BIT0
 #define MHL_INT_DSCR_CHG                    BIT1
 #define MHL_INT_REQ_WRT                     BIT2
 #define MHL_INT_GRT_WRT                     BIT3

 /* On INTR_1 the EDID_CHG is located at BIT 0*/
 #define	MHL_INT_EDID_CHG					BIT1

 /* This contains one nibble each - max offset */
 #define		MHL_INT_AND_STATUS_SIZE			0x33
 #define         MHL_SCRATCHPAD_OFFSET                   0x40
 #define		MHL_SCRATCHPAD_SIZE			16
 #define		MAX_SCRATCHPAD_TRANSFER_SIZE		64
 #define		ADOPTER_ID_SIZE				2

 /* manually define highest number */
 #define		MHL_MAX_BUFFER_SIZE			MHL_SCRATCHPAD_SIZE


 enum {
 	/* RCP sub-command  */
 	MHL_MSC_MSG_RCP             = 0x10,
 	/* RCP Acknowledge sub-command  */
 	MHL_MSC_MSG_RCPK            = 0x11,
 	/* RCP Error sub-command  */
 	MHL_MSC_MSG_RCPE            = 0x12,
 	/* Mode Change Warning sub-command  */
 	MHL_MSC_MSG_RAP             = 0x20,
 	/* MCW Acknowledge sub-command  */
 	MHL_MSC_MSG_RAPK            = 0x21,
 };

 #define MHL_RCPE_NO_ERROR			0x00
 #define MHL_RCPE_UNSUPPORTED_KEY_CODE		0x01
 #define MHL_RCPE_INEFFECTIVE_KEY_CODE		0x01
 #define MHL_RCPE_BUSY				0x02

 #define MHL_RAPK_NO_ERROR			0x00
 #define MHL_RAPK_UNRECOGNIZED_ACTION_CODE	0x01
 #define MHL_RAPK_UNSUPPORTED_ACTION_CODE	0x02
 #define MHL_RAPK_BUSY				0x03

 #define T_ABORT_NEXT                    (2050)

 /* MHL spec related defines*/
 enum {
 	/* Command or Data byte acknowledge */
 	MHL_ACK						= 0x33,
 	/* Command or Data byte not acknowledge */
 	MHL_NACK					= 0x34,
 	/* Transaction abort */
 	MHL_ABORT					= 0x35,
 	/* 0xE0 - Write one status register strip top bit */
 	MHL_WRITE_STAT				= 0x60 | 0x80,
 	/* Write one interrupt register */
 	MHL_SET_INT					= 0x60,
 	/* Read one register */
 	MHL_READ_DEVCAP				= 0x61,
 	/* Read CBUS revision level from follower */
 	MHL_GET_STATE				= 0x62,
 	/* Read vendor ID value from follower. */
 	MHL_GET_VENDOR_ID			= 0x63,
 	/* Set Hot Plug Detect in follower */
 	MHL_SET_HPD					= 0x64,
 	/* Clear Hot Plug Detect in follower */
 	MHL_CLR_HPD					= 0x65,
 	/* Set Capture ID for downstream device. */
 	MHL_SET_CAP_ID				= 0x66,
 	/* Get Capture ID from downstream device. */
 	MHL_GET_CAP_ID				= 0x67,
 	/* VS command to send RCP sub-commands */
 	MHL_MSC_MSG					= 0x68,
 	/* Get Vendor-Specific command error code. */
 	MHL_GET_SC1_ERRORCODE		= 0x69,
 	/* Get DDC channel command error code. */
 	MHL_GET_DDC_ERRORCODE		= 0x6A,
 	/* Get MSC command error code. */
 	MHL_GET_MSC_ERRORCODE		= 0x6B,
 	/* Write 1-16 bytes to responder's scratchpad. */
 	MHL_WRITE_BURST				= 0x6C,
 	/* Get channel 3 command error code. */
 	MHL_GET_SC3_ERRORCODE		= 0x6D,
 };

 /* Polling. */
 #define MHL_RAP_POLL                    0x00
 /* Turn content streaming ON. */
 #define	MHL_RAP_CONTENT_ON		0x10
 /* Turn content streaming OFF. */
 #define	MHL_RAP_CONTENT_OFF		0x11

 /*
  *
  * MHL Timings applicable to this driver.
  *
  */
 /* 100 - 1000 milliseconds. Per MHL 1.0 Specs */
 #define	T_SRC_VBUS_CBUS_TO_STABLE	(200)
 /* 20 milliseconds. Per MHL 1.0 Specs */
 #define	T_SRC_WAKE_PULSE_WIDTH_1	(20)
 /* 60 milliseconds. Per MHL 1.0 Specs */
 #define	T_SRC_WAKE_PULSE_WIDTH_2	(60)

 /* 100 - 1000 milliseconds. Per MHL 1.0 Specs */
 #define	T_SRC_WAKE_TO_DISCOVER		(500)

 #define T_SRC_VBUS_CBUS_T0_STABLE	(500)

 /* Allow RSEN to stay low this much before reacting.*/
 #define	T_SRC_RSEN_DEGLITCH			(100)

 /* Wait this much after connection before reacting to RSEN (300-500ms)*/
 /* Per specs between 300 to 500 ms*/
 #define	T_SRC_RXSENSE_CHK			(400)

 #endif /* __MHL_SPEC_DEFS_H__ */
	/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/
	#ifndef __MHL_SPEC_DEFS_H__
	#define __MHL_SPEC_DEFS_H__

	enum DevCapOffset_e {
	DEVCAP_OFFSET_DEV_STATE = 0x00,
	DEVCAP_OFFSET_MHL_VERSION = 0x01,
	DEVCAP_OFFSET_DEV_CAT = 0x02,
	DEVCAP_OFFSET_ADOPTER_ID_H = 0x03,
	DEVCAP_OFFSET_ADOPTER_ID_L = 0x04,
	DEVCAP_OFFSET_VID_LINK_MODE = 0x05,
	DEVCAP_OFFSET_AUD_LINK_MODE = 0x06,
	DEVCAP_OFFSET_VIDEO_TYPE = 0x07,
	DEVCAP_OFFSET_LOG_DEV_MAP = 0x08,
	DEVCAP_OFFSET_BANDWIDTH = 0x09,
	DEVCAP_OFFSET_FEATURE_FLAG = 0x0A,
	DEVCAP_OFFSET_DEVICE_ID_H = 0x0B,
	DEVCAP_OFFSET_DEVICE_ID_L = 0x0C,
	DEVCAP_OFFSET_SCRATCHPAD_SIZE = 0x0D,
	DEVCAP_OFFSET_INT_STAT_SIZE = 0x0E,
	DEVCAP_OFFSET_RESERVED = 0x0F,
	/* this one must be last */
	DEVCAP_SIZE
	};

	#ifndef __MHL_MSM_8334_REGS_H__
	#define __MHL_MSM_8334_REGS_H__

	#define BIT0 0x01
	#define BIT1 0x02
	#define BIT2 0x04
	#define BIT3 0x08
	#define BIT4 0x10
	#define BIT5 0x20
	#define BIT6 0x40
	#define BIT7 0x80

	#define LOW 0
	#define HIGH 1

	#define MAX_PAGES 8
	#endif


	/* Version that this chip supports*/
	/* bits 4..7 */
	#define MHL_VER_MAJOR (0x01 << 4)
	/* bits 0..3 */
	#define MHL_VER_MINOR 0x01
	#define MHL_VERSION (MHL_VER_MAJOR \| MHL_VER_MINOR)

	/Device Category/
	#define MHL_DEV_CATEGORY_OFFSET DEVCAP_OFFSET_DEV_CAT
	#define MHL_DEV_CATEGORY_POW_BIT (BIT4)

	#define MHL_DEV_CAT_SOURCE 0x02

	/Video Link Mode/
	#define MHL_DEV_VID_LINK_SUPPRGB444 0x01
	#define MHL_DEV_VID_LINK_SUPPYCBCR444 0x02
	#define MHL_DEV_VID_LINK_SUPPYCBCR422 0x04
	#define MHL_DEV_VID_LINK_SUPP_PPIXEL 0x08
	#define MHL_DEV_VID_LINK_SUPP_ISLANDS 0x10

	/Audio Link Mode Support/
	#define MHL_DEV_AUD_LINK_2CH 0x01
	#define MHL_DEV_AUD_LINK_8CH 0x02


	/Feature Flag in the devcap/
	#define MHL_DEV_FEATURE_FLAG_OFFSET DEVCAP_OFFSET_FEATURE_FLAG
	/* Dongles have freedom to not support RCP */
	#define MHL_FEATURE_RCP_SUPPORT BIT0
	/* Dongles have freedom to not support RAP */
	#define MHL_FEATURE_RAP_SUPPORT BIT1
	/* Dongles have freedom to not support SCRATCHPAD */
	#define MHL_FEATURE_SP_SUPPORT BIT2

	/Logical Dev Map/
	#define MHL_DEV_LD_DISPLAY (0x01 << 0)
	#define MHL_DEV_LD_VIDEO (0x01 << 1)
	#define MHL_DEV_LD_AUDIO (0x01 << 2)
	#define MHL_DEV_LD_MEDIA (0x01 << 3)
	#define MHL_DEV_LD_TUNER (0x01 << 4)
	#define MHL_DEV_LD_RECORD (0x01 << 5)
	#define MHL_DEV_LD_SPEAKER (0x01 << 6)
	#define MHL_DEV_LD_GUI (0x01 << 7)

	/Bandwidth/
	/* 225 MHz */
	#define MHL_BANDWIDTH_LIMIT 22


	#define MHL_STATUS_REG_CONNECTED_RDY 0x30
	#define MHL_STATUS_REG_LINK_MODE 0x31

	#define MHL_STATUS_DCAP_RDY BIT0

	#define MHL_STATUS_CLK_MODE_MASK 0x07
	#define MHL_STATUS_CLK_MODE_PACKED_PIXEL 0x02
	#define MHL_STATUS_CLK_MODE_NORMAL 0x03
	#define MHL_STATUS_PATH_EN_MASK 0x08
	#define MHL_STATUS_PATH_ENABLED 0x08
	#define MHL_STATUS_PATH_DISABLED 0x00
	#define MHL_STATUS_MUTED_MASK 0x10

	#define MHL_RCHANGE_INT 0x20
	#define MHL_DCHANGE_INT 0x21

	#define MHL_INT_DCAP_CHG BIT0
	#define MHL_INT_DSCR_CHG BIT1
	#define MHL_INT_REQ_WRT BIT2
	#define MHL_INT_GRT_WRT BIT3

	/* On INTR_1 the EDID_CHG is located at BIT 0*/
	#define MHL_INT_EDID_CHG BIT1

	/* This contains one nibble each - max offset */
	#define MHL_INT_AND_STATUS_SIZE 0x33
	#define MHL_SCRATCHPAD_OFFSET 0x40
	#define MHL_SCRATCHPAD_SIZE 16
	#define MAX_SCRATCHPAD_TRANSFER_SIZE 64
	#define ADOPTER_ID_SIZE 2

	/* manually define highest number */
	#define MHL_MAX_BUFFER_SIZE MHL_SCRATCHPAD_SIZE



	enum {
	/* RCP sub-command */
	MHL_MSC_MSG_RCP = 0x10,
	/* RCP Acknowledge sub-command */
	MHL_MSC_MSG_RCPK = 0x11,
	/* RCP Error sub-command */
	MHL_MSC_MSG_RCPE = 0x12,
	/* Mode Change Warning sub-command */
	MHL_MSC_MSG_RAP = 0x20,
	/* MCW Acknowledge sub-command */
	MHL_MSC_MSG_RAPK = 0x21,
	};

	#define MHL_RCPE_NO_ERROR 0x00
	#define MHL_RCPE_UNSUPPORTED_KEY_CODE 0x01
	#define MHL_RCPE_INEFFECTIVE_KEY_CODE 0x01
	#define MHL_RCPE_BUSY 0x02

	#define MHL_RAPK_NO_ERROR 0x00
	#define MHL_RAPK_UNRECOGNIZED_ACTION_CODE 0x01
	#define MHL_RAPK_UNSUPPORTED_ACTION_CODE 0x02
	#define MHL_RAPK_BUSY 0x03

	#define T_ABORT_NEXT (2050)

	/* MHL spec related defines*/
	enum {
	/* Command or Data byte acknowledge */
	MHL_ACK = 0x33,
	/* Command or Data byte not acknowledge */
	MHL_NACK = 0x34,
	/* Transaction abort */
	MHL_ABORT = 0x35,
	/* 0xE0 - Write one status register strip top bit */
	MHL_WRITE_STAT = 0x60 \| 0x80,
	/* Write one interrupt register */
	MHL_SET_INT = 0x60,
	/* Read one register */
	MHL_READ_DEVCAP = 0x61,
	/* Read CBUS revision level from follower */
	MHL_GET_STATE = 0x62,
	/* Read vendor ID value from follower. */
	MHL_GET_VENDOR_ID = 0x63,
	/* Set Hot Plug Detect in follower */
	MHL_SET_HPD = 0x64,
	/* Clear Hot Plug Detect in follower */
	MHL_CLR_HPD = 0x65,
	/* Set Capture ID for downstream device. */
	MHL_SET_CAP_ID = 0x66,
	/* Get Capture ID from downstream device. */
	MHL_GET_CAP_ID = 0x67,
	/* VS command to send RCP sub-commands */
	MHL_MSC_MSG = 0x68,
	/* Get Vendor-Specific command error code. */
	MHL_GET_SC1_ERRORCODE = 0x69,
	/* Get DDC channel command error code. */
	MHL_GET_DDC_ERRORCODE = 0x6A,
	/* Get MSC command error code. */
	MHL_GET_MSC_ERRORCODE = 0x6B,
	/* Write 1-16 bytes to responder's scratchpad. */
	MHL_WRITE_BURST = 0x6C,
	/* Get channel 3 command error code. */
	MHL_GET_SC3_ERRORCODE = 0x6D,
	};

	/* Polling. */
	#define MHL_RAP_POLL 0x00
	/* Turn content streaming ON. */
	#define MHL_RAP_CONTENT_ON 0x10
	/* Turn content streaming OFF. */
	#define MHL_RAP_CONTENT_OFF 0x11

	/*
	*
	* MHL Timings applicable to this driver.
	*
	*/
	/* 100 - 1000 milliseconds. Per MHL 1.0 Specs */
	#define T_SRC_VBUS_CBUS_TO_STABLE (200)
	/* 20 milliseconds. Per MHL 1.0 Specs */
	#define T_SRC_WAKE_PULSE_WIDTH_1 (20)
	/* 60 milliseconds. Per MHL 1.0 Specs */
	#define T_SRC_WAKE_PULSE_WIDTH_2 (60)

	/* 100 - 1000 milliseconds. Per MHL 1.0 Specs */
	#define T_SRC_WAKE_TO_DISCOVER (500)

	#define T_SRC_VBUS_CBUS_T0_STABLE (500)

	/* Allow RSEN to stay low this much before reacting.*/
	#define T_SRC_RSEN_DEGLITCH (100)

	/* Wait this much after connection before reacting to RSEN (300-500ms)*/
	/* Per specs between 300 to 500 ms*/
	#define T_SRC_RXSENSE_CHK (400)

	#endif /* __MHL_SPEC_DEFS_H__ */