arch/arm/mach-s5pv210/mach-smdkv210.c - kernel/msm - Gitiles

 /* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
  *
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */

 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
 #include <linux/dm9000.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>

 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>

 #include <video/platform_lcd.h>

 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-fb.h>

 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/gpio-cfg.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
 #include <plat/ts.h>
 #include <plat/ata.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
 #include <plat/pm.h>
 #include <plat/fb.h>
 #include <plat/s5p-time.h>

 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
 				 S3C2410_UCON_TXIRQMODE |	\
 				 S3C2410_UCON_RXIRQMODE |	\
 				 S3C2410_UCON_RXFIFO_TOI |	\
 				 S3C2443_UCON_RXERR_IRQEN)

 #define SMDKV210_ULCON_DEFAULT	S3C2410_LCON_CS8

 #define SMDKV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
 				 S5PV210_UFCON_TXTRIG4 |	\
 				 S5PV210_UFCON_RXTRIG4)

 static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
 		.ucon		= SMDKV210_UCON_DEFAULT,
 		.ulcon		= SMDKV210_ULCON_DEFAULT,
 		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
 		.ucon		= SMDKV210_UCON_DEFAULT,
 		.ulcon		= SMDKV210_ULCON_DEFAULT,
 		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
 		.ucon		= SMDKV210_UCON_DEFAULT,
 		.ulcon		= SMDKV210_ULCON_DEFAULT,
 		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
 		.ucon		= SMDKV210_UCON_DEFAULT,
 		.ulcon		= SMDKV210_ULCON_DEFAULT,
 		.ufcon		= SMDKV210_UFCON_DEFAULT,
 	},
 };

 static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
 	.setup_gpio	= s5pv210_ide_setup_gpio,
 };

 static uint32_t smdkv210_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
 	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
 	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
 	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
 	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
 };

 static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
 	.keymap		= smdkv210_keymap,
 	.keymap_size	= ARRAY_SIZE(smdkv210_keymap),
 };

 static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
 	.keymap_data	= &smdkv210_keymap_data,
 	.rows		= 8,
 	.cols		= 8,
 };

 static struct resource smdkv210_dm9000_resources[] = {
 	[0] = {
 		.start	= S5PV210_PA_SROM_BANK5,
 		.end	= S5PV210_PA_SROM_BANK5,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
 		.start	= S5PV210_PA_SROM_BANK5 + 2,
 		.end	= S5PV210_PA_SROM_BANK5 + 2,
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
 		.start	= IRQ_EINT(9),
 		.end	= IRQ_EINT(9),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };

 static struct dm9000_plat_data smdkv210_dm9000_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 	.dev_addr	= { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
 };

 struct platform_device smdkv210_dm9000 = {
 	.name		= "dm9000",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smdkv210_dm9000_resources),
 	.resource	= smdkv210_dm9000_resources,
 	.dev		= {
 		.platform_data	= &smdkv210_dm9000_platdata,
 	},
 };

 static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
 					unsigned int power)
 {
 	if (power) {
 #if !defined(CONFIG_BACKLIGHT_PWM)
 		gpio_request(S5PV210_GPD0(3), "GPD0");
 		gpio_direction_output(S5PV210_GPD0(3), 1);
 		gpio_free(S5PV210_GPD0(3));
 #endif

 		/* fire nRESET on power up */
 		gpio_request(S5PV210_GPH0(6), "GPH0");

 		gpio_direction_output(S5PV210_GPH0(6), 1);

 		gpio_set_value(S5PV210_GPH0(6), 0);
 		mdelay(10);

 		gpio_set_value(S5PV210_GPH0(6), 1);
 		mdelay(10);

 		gpio_free(S5PV210_GPH0(6));
 	} else {
 #if !defined(CONFIG_BACKLIGHT_PWM)
 		gpio_request(S5PV210_GPD0(3), "GPD0");
 		gpio_direction_output(S5PV210_GPD0(3), 0);
 		gpio_free(S5PV210_GPD0(3));
 #endif
 	}
 }

 static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
 	.set_power	= smdkv210_lte480wv_set_power,
 };

 static struct platform_device smdkv210_lcd_lte480wv = {
 	.name			= "platform-lcd",
 	.dev.parent		= &s3c_device_fb.dev,
 	.dev.platform_data	= &smdkv210_lcd_lte480wv_data,
 };

 static struct s3c_fb_pd_win smdkv210_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 13,
 		.right_margin	= 8,
 		.upper_margin	= 7,
 		.lower_margin	= 5,
 		.hsync_len	= 3,
 		.vsync_len	= 1,
 		.xres		= 800,
 		.yres		= 480,
 	},
 	.max_bpp	= 32,
 	.default_bpp	= 24,
 };

 static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
 	.win[0]		= &smdkv210_fb_win0,
 	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
 	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };

 static int smdkv210_backlight_init(struct device *dev)
 {
 	int ret;

 	ret = gpio_request(S5PV210_GPD0(3), "Backlight");
 	if (ret) {
 		printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n");
 		return ret;
 	}

 	/* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */
 	s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2));

 	return 0;
 }

 static void smdkv210_backlight_exit(struct device *dev)
 {
 	s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT);
 	gpio_free(S5PV210_GPD0(3));
 }

 static struct platform_pwm_backlight_data smdkv210_backlight_data = {
 	.pwm_id		= 3,
 	.max_brightness	= 255,
 	.dft_brightness	= 255,
 	.pwm_period_ns	= 78770,
 	.init		= smdkv210_backlight_init,
 	.exit		= smdkv210_backlight_exit,
 };

 static struct platform_device smdkv210_backlight_device = {
 	.name		= "pwm-backlight",
 	.dev		= {
 		.parent		= &s3c_device_timer[3].dev,
 		.platform_data	= &smdkv210_backlight_data,
 	},
 };

 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_cfcon,
 	&s3c_device_fb,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
 	&s3c_device_i2c2,
 	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 	&s5pv210_device_ac97,
 	&s5pv210_device_iis0,
 	&s5pv210_device_spdif,
 	&samsung_asoc_dma,
 	&samsung_device_keypad,
 	&smdkv210_dm9000,
 	&smdkv210_lcd_lte480wv,
 	&s3c_device_timer[3],
 	&smdkv210_backlight_device,
 };

 static void __init smdkv210_dm9000_init(void)
 {
 	unsigned int tmp;

 	gpio_request(S5PV210_MP01(5), "nCS5");
 	s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
 	gpio_free(S5PV210_MP01(5));

 	tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
 	__raw_writel(tmp, S5P_SROM_BC5);

 	tmp = __raw_readl(S5P_SROM_BW);
 	tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
 	tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
 	__raw_writel(tmp, S5P_SROM_BW);
 }

 static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
 	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
 	{ I2C_BOARD_INFO("wm8580", 0x1b), },
 };

 static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
 	/* To Be Updated */
 };

 static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
 	/* To Be Updated */
 };

 static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
 	.delay			= 10000,
 	.presc			= 49,
 	.oversampling_shift	= 2,
 };

 static void __init smdkv210_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
 	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }

 static void __init smdkv210_machine_init(void)
 {
 	s3c_pm_init();

 	smdkv210_dm9000_init();

 	samsung_keypad_set_platdata(&smdkv210_keypad_data);
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);

 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_i2c2_set_platdata(NULL);
 	i2c_register_board_info(0, smdkv210_i2c_devs0,
 			ARRAY_SIZE(smdkv210_i2c_devs0));
 	i2c_register_board_info(1, smdkv210_i2c_devs1,
 			ARRAY_SIZE(smdkv210_i2c_devs1));
 	i2c_register_board_info(2, smdkv210_i2c_devs2,
 			ARRAY_SIZE(smdkv210_i2c_devs2));

 	s3c_ide_set_platdata(&smdkv210_ide_pdata);

 	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);

 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }

 MACHINE_START(SMDKV210, "SMDKV210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkv210_map_io,
 	.init_machine	= smdkv210_machine_init,
 	.timer		= &s5p_timer,
 MACHINE_END
	/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
	*
	* Copyright (c) 2010 Samsung Electronics Co., Ltd.
	* http://www.samsung.com/
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/i2c.h>
	#include <linux/init.h>
	#include <linux/serial_core.h>
	#include <linux/sysdev.h>
	#include <linux/dm9000.h>
	#include <linux/fb.h>
	#include <linux/gpio.h>
	#include <linux/delay.h>
	#include <linux/pwm_backlight.h>

	#include <asm/mach/arch.h>
	#include <asm/mach/map.h>
	#include <asm/setup.h>
	#include <asm/mach-types.h>

	#include <video/platform_lcd.h>

	#include <mach/map.h>
	#include <mach/regs-clock.h>
	#include <mach/regs-fb.h>

	#include <plat/regs-serial.h>
	#include <plat/regs-srom.h>
	#include <plat/gpio-cfg.h>
	#include <plat/s5pv210.h>
	#include <plat/devs.h>
	#include <plat/cpu.h>
	#include <plat/adc.h>
	#include <plat/ts.h>
	#include <plat/ata.h>
	#include <plat/iic.h>
	#include <plat/keypad.h>
	#include <plat/pm.h>
	#include <plat/fb.h>
	#include <plat/s5p-time.h>

	/* Following are default values for UCON, ULCON and UFCON UART registers */
	#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL \| \
	S3C2410_UCON_RXILEVEL \| \
	S3C2410_UCON_TXIRQMODE \| \
	S3C2410_UCON_RXIRQMODE \| \
	S3C2410_UCON_RXFIFO_TOI \| \
	S3C2443_UCON_RXERR_IRQEN)

	#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8

	#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE \| \
	S5PV210_UFCON_TXTRIG4 \| \
	S5PV210_UFCON_RXTRIG4)

	static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
	[0] = {
	.hwport = 0,
	.flags = 0,
	.ucon = SMDKV210_UCON_DEFAULT,
	.ulcon = SMDKV210_ULCON_DEFAULT,
	.ufcon = SMDKV210_UFCON_DEFAULT,
	},
	[1] = {
	.hwport = 1,
	.flags = 0,
	.ucon = SMDKV210_UCON_DEFAULT,
	.ulcon = SMDKV210_ULCON_DEFAULT,
	.ufcon = SMDKV210_UFCON_DEFAULT,
	},
	[2] = {
	.hwport = 2,
	.flags = 0,
	.ucon = SMDKV210_UCON_DEFAULT,
	.ulcon = SMDKV210_ULCON_DEFAULT,
	.ufcon = SMDKV210_UFCON_DEFAULT,
	},
	[3] = {
	.hwport = 3,
	.flags = 0,
	.ucon = SMDKV210_UCON_DEFAULT,
	.ulcon = SMDKV210_ULCON_DEFAULT,
	.ufcon = SMDKV210_UFCON_DEFAULT,
	},
	};

	static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
	.setup_gpio = s5pv210_ide_setup_gpio,
	};

	static uint32_t smdkv210_keymap[] __initdata = {
	/* KEY(row, col, keycode) */
	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
	};

	static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
	.keymap = smdkv210_keymap,
	.keymap_size = ARRAY_SIZE(smdkv210_keymap),
	};

	static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
	.keymap_data = &smdkv210_keymap_data,
	.rows = 8,
	.cols = 8,
	};

	static struct resource smdkv210_dm9000_resources[] = {
	[0] = {
	.start = S5PV210_PA_SROM_BANK5,
	.end = S5PV210_PA_SROM_BANK5,
	.flags = IORESOURCE_MEM,
	},
	[1] = {
	.start = S5PV210_PA_SROM_BANK5 + 2,
	.end = S5PV210_PA_SROM_BANK5 + 2,
	.flags = IORESOURCE_MEM,
	},
	[2] = {
	.start = IRQ_EINT(9),
	.end = IRQ_EINT(9),
	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_HIGHLEVEL,
	},
	};

	static struct dm9000_plat_data smdkv210_dm9000_platdata = {
	.flags = DM9000_PLATF_16BITONLY \| DM9000_PLATF_NO_EEPROM,
	.dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
	};

	struct platform_device smdkv210_dm9000 = {
	.name = "dm9000",
	.id = -1,
	.num_resources = ARRAY_SIZE(smdkv210_dm9000_resources),
	.resource = smdkv210_dm9000_resources,
	.dev = {
	.platform_data = &smdkv210_dm9000_platdata,
	},
	};

	static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
	unsigned int power)
	{
	if (power) {
	#if !defined(CONFIG_BACKLIGHT_PWM)
	gpio_request(S5PV210_GPD0(3), "GPD0");
	gpio_direction_output(S5PV210_GPD0(3), 1);
	gpio_free(S5PV210_GPD0(3));
	#endif

	/* fire nRESET on power up */
	gpio_request(S5PV210_GPH0(6), "GPH0");

	gpio_direction_output(S5PV210_GPH0(6), 1);

	gpio_set_value(S5PV210_GPH0(6), 0);
	mdelay(10);

	gpio_set_value(S5PV210_GPH0(6), 1);
	mdelay(10);

	gpio_free(S5PV210_GPH0(6));
	} else {
	#if !defined(CONFIG_BACKLIGHT_PWM)
	gpio_request(S5PV210_GPD0(3), "GPD0");
	gpio_direction_output(S5PV210_GPD0(3), 0);
	gpio_free(S5PV210_GPD0(3));
	#endif
	}
	}

	static struct plat_lcd_data smdkv210_lcd_lte480wv_data = {
	.set_power = smdkv210_lte480wv_set_power,
	};

	static struct platform_device smdkv210_lcd_lte480wv = {
	.name = "platform-lcd",
	.dev.parent = &s3c_device_fb.dev,
	.dev.platform_data = &smdkv210_lcd_lte480wv_data,
	};

	static struct s3c_fb_pd_win smdkv210_fb_win0 = {
	.win_mode = {
	.left_margin = 13,
	.right_margin = 8,
	.upper_margin = 7,
	.lower_margin = 5,
	.hsync_len = 3,
	.vsync_len = 1,
	.xres = 800,
	.yres = 480,
	},
	.max_bpp = 32,
	.default_bpp = 24,
	};

	static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = {
	.win[0] = &smdkv210_fb_win0,
	.vidcon0 = VIDCON0_VIDOUT_RGB \| VIDCON0_PNRMODE_RGB,
	.vidcon1 = VIDCON1_INV_HSYNC \| VIDCON1_INV_VSYNC,
	.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
	};

	static int smdkv210_backlight_init(struct device *dev)
	{
	int ret;

	ret = gpio_request(S5PV210_GPD0(3), "Backlight");
	if (ret) {
	printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n");
	return ret;
	}

	/* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */
	s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2));

	return 0;
	}

	static void smdkv210_backlight_exit(struct device *dev)
	{
	s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT);
	gpio_free(S5PV210_GPD0(3));
	}

	static struct platform_pwm_backlight_data smdkv210_backlight_data = {
	.pwm_id = 3,
	.max_brightness = 255,
	.dft_brightness = 255,
	.pwm_period_ns = 78770,
	.init = smdkv210_backlight_init,
	.exit = smdkv210_backlight_exit,
	};

	static struct platform_device smdkv210_backlight_device = {
	.name = "pwm-backlight",
	.dev = {
	.parent = &s3c_device_timer[3].dev,
	.platform_data = &smdkv210_backlight_data,
	},
	};

	static struct platform_device *smdkv210_devices[] __initdata = {
	&s3c_device_adc,
	&s3c_device_cfcon,
	&s3c_device_fb,
	&s3c_device_hsmmc0,
	&s3c_device_hsmmc1,
	&s3c_device_hsmmc2,
	&s3c_device_hsmmc3,
	&s3c_device_i2c0,
	&s3c_device_i2c1,
	&s3c_device_i2c2,
	&s3c_device_rtc,
	&s3c_device_ts,
	&s3c_device_wdt,
	&s5pv210_device_ac97,
	&s5pv210_device_iis0,
	&s5pv210_device_spdif,
	&samsung_asoc_dma,
	&samsung_device_keypad,
	&smdkv210_dm9000,
	&smdkv210_lcd_lte480wv,
	&s3c_device_timer[3],
	&smdkv210_backlight_device,
	};

	static void __init smdkv210_dm9000_init(void)
	{
	unsigned int tmp;

	gpio_request(S5PV210_MP01(5), "nCS5");
	s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
	gpio_free(S5PV210_MP01(5));

	tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
	__raw_writel(tmp, S5P_SROM_BC5);

	tmp = __raw_readl(S5P_SROM_BW);
	tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
	tmp \|= (1 << S5P_SROM_BW__NCS5__SHIFT);
	__raw_writel(tmp, S5P_SROM_BW);
	}

	static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
	{ I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
	{ I2C_BOARD_INFO("wm8580", 0x1b), },
	};

	static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
	/* To Be Updated */
	};

	static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
	/* To Be Updated */
	};

	static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
	.delay = 10000,
	.presc = 49,
	.oversampling_shift = 2,
	};

	static void __init smdkv210_map_io(void)
	{
	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
	s3c24xx_init_clocks(24000000);
	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
	}

	static void __init smdkv210_machine_init(void)
	{
	s3c_pm_init();

	smdkv210_dm9000_init();

	samsung_keypad_set_platdata(&smdkv210_keypad_data);
	s3c24xx_ts_set_platdata(&s3c_ts_platform);

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, smdkv210_i2c_devs0,
	ARRAY_SIZE(smdkv210_i2c_devs0));
	i2c_register_board_info(1, smdkv210_i2c_devs1,
	ARRAY_SIZE(smdkv210_i2c_devs1));
	i2c_register_board_info(2, smdkv210_i2c_devs2,
	ARRAY_SIZE(smdkv210_i2c_devs2));

	s3c_ide_set_platdata(&smdkv210_ide_pdata);

	s3c_fb_set_platdata(&smdkv210_lcd0_pdata);

	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
	}

	MACHINE_START(SMDKV210, "SMDKV210")
	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
	.boot_params = S5P_PA_SDRAM + 0x100,
	.init_irq = s5pv210_init_irq,
	.map_io = smdkv210_map_io,
	.init_machine = smdkv210_machine_init,
	.timer = &s5p_timer,
	MACHINE_END