drivers/isdn/hisax/sedlbauer_cs.c - kernel/msm - Gitiles

 /*======================================================================

     A Sedlbauer PCMCIA client driver

     This driver is for the Sedlbauer Speed Star and Speed Star II,
     which are ISDN PCMCIA Cards.

     The contents of this file are subject to the Mozilla Public
     License Version 1.1 (the "License"); you may not use this file
     except in compliance with the License. You may obtain a copy of
     the License at http://www.mozilla.org/MPL/

     Software distributed under the License is distributed on an "AS
     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
     implied. See the License for the specific language governing
     rights and limitations under the License.

     The initial developer of the original code is David A. Hinds
     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

     Modifications from dummy_cs.c are Copyright (C) 1999-2001 Marcus Niemann
     <maniemann@users.sourceforge.net>. All Rights Reserved.

     Alternatively, the contents of this file may be used under the
     terms of the GNU General Public License version 2 (the "GPL"), in
     which case the provisions of the GPL are applicable instead of the
     above.  If you wish to allow the use of your version of this file
     only under the terms of the GPL and not to allow others to use
     your version of this file under the MPL, indicate your decision
     by deleting the provisions above and replace them with the notice
     and other provisions required by the GPL.  If you do not delete
     the provisions above, a recipient may use your version of this
     file under either the MPL or the GPL.

 ======================================================================*/

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/timer.h>
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/system.h>

 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
 #include "hisax_cfg.h"

 MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards");
 MODULE_AUTHOR("Marcus Niemann");
 MODULE_LICENSE("Dual MPL/GPL");

 /*
    All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
    you do not define PCMCIA_DEBUG at all, all the debug code will be
    left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
    be present but disabled -- but it can then be enabled for specific
    modules at load time with a 'pc_debug=#' option to insmod.
 */

 #ifdef PCMCIA_DEBUG
 static int pc_debug = PCMCIA_DEBUG;
 module_param(pc_debug, int, 0);
 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
 static char *version =
 "sedlbauer_cs.c 1.1a 2001/01/28 15:04:04 (M.Niemann)";
 #else
 #define DEBUG(n, args...)
 #endif


 /*====================================================================*/

 /* Parameters that can be set with 'insmod' */

 static int protocol = 2;        /* EURO-ISDN Default */
 module_param(protocol, int, 0);

 /*====================================================================*/

 /*
    The event() function is this driver's Card Services event handler.
    It will be called by Card Services when an appropriate card status
    event is received.  The config() and release() entry points are
    used to configure or release a socket, in response to card
    insertion and ejection events.  They are invoked from the sedlbauer
    event handler.
 */

 static int sedlbauer_config(struct pcmcia_device *link);
 static void sedlbauer_release(struct pcmcia_device *link);

 /*
    The attach() and detach() entry points are used to create and destroy
    "instances" of the driver, where each instance represents everything
    needed to manage one actual PCMCIA card.
 */

 static void sedlbauer_detach(struct pcmcia_device *p_dev);

 /*
    You'll also need to prototype all the functions that will actually
    be used to talk to your device.  See 'memory_cs' for a good example
    of a fully self-sufficient driver; the other drivers rely more or
    less on other parts of the kernel.
 */

 /*
    A driver needs to provide a dev_node_t structure for each device
    on a card.  In some cases, there is only one device per card (for
    example, ethernet cards, modems).  In other cases, there may be
    many actual or logical devices (SCSI adapters, memory cards with
    multiple partitions).  The dev_node_t structures need to be kept
    in a linked list starting at the 'dev' field of a struct pcmcia_device
    structure.  We allocate them in the card's private data structure,
    because they generally shouldn't be allocated dynamically.

    In this case, we also provide a flag to indicate if a device is
    "stopped" due to a power management event, or card ejection.  The
    device IO routines can use a flag like this to throttle IO to a
    card that is not ready to accept it.
 */

 typedef struct local_info_t {
 	struct pcmcia_device	*p_dev;
     dev_node_t		node;
     int			stop;
     int			cardnr;
 } local_info_t;

 /*======================================================================

     sedlbauer_attach() creates an "instance" of the driver, allocating
     local data structures for one device.  The device is registered
     with Card Services.

     The dev_link structure is initialized, but we don't actually
     configure the card at this point -- we wait until we receive a
     card insertion event.

 ======================================================================*/

 static int sedlbauer_probe(struct pcmcia_device *link)
 {
     local_info_t *local;

     DEBUG(0, "sedlbauer_attach()\n");

     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
     if (!local) return -ENOMEM;
     local->cardnr = -1;

     local->p_dev = link;
     link->priv = local;

     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = NULL;

     /*
       General socket configuration defaults can go here.  In this
       client, we assume very little, and rely on the CIS for almost
       everything.  In most clients, many details (i.e., number, sizes,
       and attributes of IO windows) are fixed by the nature of the
       device, and can be hard-wired here.
     */

     /* from old sedl_cs
     */
     /* The io structure describes IO port mapping */
     link->io.NumPorts1 = 8;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.IOAddrLines = 3;

     link->conf.Attributes = 0;
     link->conf.IntType = INT_MEMORY_AND_IO;

     return sedlbauer_config(link);
 } /* sedlbauer_attach */

 /*======================================================================

     This deletes a driver "instance".  The device is de-registered
     with Card Services.  If it has been released, all local data
     structures are freed.  Otherwise, the structures will be freed
     when the device is released.

 ======================================================================*/

 static void sedlbauer_detach(struct pcmcia_device *link)
 {
 	DEBUG(0, "sedlbauer_detach(0x%p)\n", link);

 	((local_info_t *)link->priv)->stop = 1;
 	sedlbauer_release(link);

 	/* This points to the parent local_info_t struct */
 	kfree(link->priv);
 } /* sedlbauer_detach */

 /*======================================================================

     sedlbauer_config() is scheduled to run after a CARD_INSERTION event
     is received, to configure the PCMCIA socket, and to make the
     device available to the system.

 ======================================================================*/
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)

 static int sedlbauer_config(struct pcmcia_device *link)
 {
     local_info_t *dev = link->priv;
     tuple_t tuple;
     cisparse_t parse;
     int last_fn, last_ret;
     u8 buf[64];
     config_info_t conf;
     win_req_t req;
     memreq_t map;
     IsdnCard_t  icard;

     DEBUG(0, "sedlbauer_config(0x%p)\n", link);

     tuple.Attributes = 0;
     tuple.TupleData = buf;
     tuple.TupleDataMax = sizeof(buf);
     tuple.TupleOffset = 0;

     CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));

     /*
       In this loop, we scan the CIS for configuration table entries,
       each of which describes a valid card configuration, including
       voltage, IO window, memory window, and interrupt settings.

       We make no assumptions about the card to be configured: we use
       just the information available in the CIS.  In an ideal world,
       this would work for any PCMCIA card, but it requires a complete
       and accurate CIS.  In practice, a driver usually "knows" most of
       these things without consulting the CIS, and most client drivers
       will only use the CIS to fill in implementation-defined details.
     */
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
     while (1) {
 	cistpl_cftable_entry_t dflt = { 0 };
 	cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
 	if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
 		pcmcia_parse_tuple(link, &tuple, &parse) != 0)
 	    goto next_entry;

 	if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
 	if (cfg->index == 0) goto next_entry;
 	link->conf.ConfigIndex = cfg->index;

 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 	    link->conf.Attributes |= CONF_ENABLE_SPKR;
 	    link->conf.Status = CCSR_AUDIO_ENA;
 	}

 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
 	    if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
 		goto next_entry;
 	} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
 	    if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000)
 		goto next_entry;
 	}

 	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
 	    link->conf.Vpp =
 		cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
 	else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
 	    link->conf.Vpp =
 		dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;

 	/* Do we need to allocate an interrupt? */
 	if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
 	    link->conf.Attributes |= CONF_ENABLE_IRQ;

 	/* IO window settings */
 	link->io.NumPorts1 = link->io.NumPorts2 = 0;
 	if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
 	    cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
 	    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	    if (!(io->flags & CISTPL_IO_8BIT))
 		link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 	    if (!(io->flags & CISTPL_IO_16BIT))
 		link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 /* new in dummy.cs 2001/01/28 MN
             link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 */
 	    link->io.BasePort1 = io->win[0].base;
 	    link->io.NumPorts1 = io->win[0].len;
 	    if (io->nwin > 1) {
 		link->io.Attributes2 = link->io.Attributes1;
 		link->io.BasePort2 = io->win[1].base;
 		link->io.NumPorts2 = io->win[1].len;
 	    }
 	    /* This reserves IO space but doesn't actually enable it */
 	    if (pcmcia_request_io(link, &link->io) != 0)
 		goto next_entry;
 	}

 	/*
 	  Now set up a common memory window, if needed.  There is room
 	  in the struct pcmcia_device structure for one memory window handle,
 	  but if the base addresses need to be saved, or if multiple
 	  windows are needed, the info should go in the private data
 	  structure for this device.

 	  Note that the memory window base is a physical address, and
 	  needs to be mapped to virtual space with ioremap() before it
 	  is used.
 	*/
 	if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
 	    cistpl_mem_t *mem =
 		(cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
 	    req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
 	    req.Attributes |= WIN_ENABLE;
 	    req.Base = mem->win[0].host_addr;
 	    req.Size = mem->win[0].len;
 /* new in dummy.cs 2001/01/28 MN
             if (req.Size < 0x1000)
                 req.Size = 0x1000;
 */
 	    req.AccessSpeed = 0;
 	    if (pcmcia_request_window(&link, &req, &link->win) != 0)
 		goto next_entry;
 	    map.Page = 0; map.CardOffset = mem->win[0].card_addr;
 	    if (pcmcia_map_mem_page(link->win, &map) != 0)
 		goto next_entry;
 	}
 	/* If we got this far, we're cool! */
 	break;

     next_entry:
 	CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
     }

     /*
        Allocate an interrupt line.  Note that this does not assign a
        handler to the interrupt, unless the 'Handler' member of the
        irq structure is initialized.
     */
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
 	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));

     /*
        This actually configures the PCMCIA socket -- setting up
        the I/O windows and the interrupt mapping, and putting the
        card and host interface into "Memory and IO" mode.
     */
     CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));

     /*
       At this point, the dev_node_t structure(s) need to be
       initialized and arranged in a linked list at link->dev.
     */
     sprintf(dev->node.dev_name, "sedlbauer");
     dev->node.major = dev->node.minor = 0;
     link->dev_node = &dev->node;

     /* Finally, report what we've done */
     printk(KERN_INFO "%s: index 0x%02x:",
 	   dev->node.dev_name, link->conf.ConfigIndex);
     if (link->conf.Vpp)
 	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
 	printk(", irq %d", link->irq.AssignedIRQ);
     if (link->io.NumPorts1)
 	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
 	       link->io.BasePort1+link->io.NumPorts1-1);
     if (link->io.NumPorts2)
 	printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 	       link->io.BasePort2+link->io.NumPorts2-1);
     if (link->win)
 	printk(", mem 0x%06lx-0x%06lx", req.Base,
 	       req.Base+req.Size-1);
     printk("\n");

     icard.para[0] = link->irq.AssignedIRQ;
     icard.para[1] = link->io.BasePort1;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;

     last_ret = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->stop), &icard);
     if (last_ret < 0) {
     	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
     		last_ret, link->io.BasePort1);
     	sedlbauer_release(link);
 	return -ENODEV;
     } else
     	((local_info_t*)link->priv)->cardnr = last_ret;

     return 0;

 cs_failed:
     cs_error(link, last_fn, last_ret);
     sedlbauer_release(link);
     return -ENODEV;

 } /* sedlbauer_config */

 /*======================================================================

     After a card is removed, sedlbauer_release() will unregister the
     device, and release the PCMCIA configuration.  If the device is
     still open, this will be postponed until it is closed.

 ======================================================================*/

 static void sedlbauer_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
     DEBUG(0, "sedlbauer_release(0x%p)\n", link);

     if (local) {
     	if (local->cardnr >= 0) {
     	    /* no unregister function with hisax */
 	    HiSax_closecard(local->cardnr);
 	}
     }

     pcmcia_disable_device(link);
 } /* sedlbauer_release */

 static int sedlbauer_suspend(struct pcmcia_device *link)
 {
 	local_info_t *dev = link->priv;

 	dev->stop = 1;

 	return 0;
 }

 static int sedlbauer_resume(struct pcmcia_device *link)
 {
 	local_info_t *dev = link->priv;

 	dev->stop = 0;

 	return 0;
 }


 static struct pcmcia_device_id sedlbauer_ids[] = {
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "speed star II", "V 3.1", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D67", 0x81fb79f5, 0xe4e9bc12, 0x397b7e90),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D98", 0x81fb79f5, 0xe4e9bc12, 0x2e5c7fce),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (C) 93-94 VK", 0x81fb79f5, 0xe4e9bc12, 0x8db143fe),
 	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (c) 93-95 VK", 0x81fb79f5, 0xe4e9bc12, 0xb391ab4c),
 	PCMCIA_DEVICE_PROD_ID12("HST High Soft Tech GmbH", "Saphir II B", 0xd79e0b84, 0x21d083ae),
 /*	PCMCIA_DEVICE_PROD_ID1234("SEDLBAUER", 0x81fb79f5), */ /* too generic*/
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);

 static struct pcmcia_driver sedlbauer_driver = {
 	.owner		= THIS_MODULE,
 	.drv		= {
 		.name	= "sedlbauer_cs",
 	},
 	.probe		= sedlbauer_probe,
 	.remove		= sedlbauer_detach,
 	.id_table	= sedlbauer_ids,
 	.suspend	= sedlbauer_suspend,
 	.resume		= sedlbauer_resume,
 };

 static int __init init_sedlbauer_cs(void)
 {
 	return pcmcia_register_driver(&sedlbauer_driver);
 }

 static void __exit exit_sedlbauer_cs(void)
 {
 	pcmcia_unregister_driver(&sedlbauer_driver);
 }

 module_init(init_sedlbauer_cs);
 module_exit(exit_sedlbauer_cs);
	/*======================================================================

	A Sedlbauer PCMCIA client driver

	This driver is for the Sedlbauer Speed Star and Speed Star II,
	which are ISDN PCMCIA Cards.

	The contents of this file are subject to the Mozilla Public
	License Version 1.1 (the "License"); you may not use this file
	except in compliance with the License. You may obtain a copy of
	the License at http://www.mozilla.org/MPL/

	Software distributed under the License is distributed on an "AS
	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	implied. See the License for the specific language governing
	rights and limitations under the License.

	The initial developer of the original code is David A. Hinds
	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.

	Modifications from dummy_cs.c are Copyright (C) 1999-2001 Marcus Niemann
	<maniemann@users.sourceforge.net>. All Rights Reserved.

	Alternatively, the contents of this file may be used under the
	terms of the GNU General Public License version 2 (the "GPL"), in
	which case the provisions of the GPL are applicable instead of the
	above. If you wish to allow the use of your version of this file
	only under the terms of the GPL and not to allow others to use
	your version of this file under the MPL, indicate your decision
	by deleting the provisions above and replace them with the notice
	and other provisions required by the GPL. If you do not delete
	the provisions above, a recipient may use your version of this
	file under either the MPL or the GPL.

	======================================================================*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/ptrace.h>
	#include <linux/slab.h>
	#include <linux/string.h>
	#include <linux/timer.h>
	#include <linux/ioport.h>
	#include <asm/io.h>
	#include <asm/system.h>

	#include <pcmcia/cs_types.h>
	#include <pcmcia/cs.h>
	#include <pcmcia/cistpl.h>
	#include <pcmcia/cisreg.h>
	#include <pcmcia/ds.h>
	#include "hisax_cfg.h"

	MODULE_DESCRIPTION("ISDN4Linux: PCMCIA client driver for Sedlbauer cards");
	MODULE_AUTHOR("Marcus Niemann");
	MODULE_LICENSE("Dual MPL/GPL");

	/*
	All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
	you do not define PCMCIA_DEBUG at all, all the debug code will be
	left out. If you compile with PCMCIA_DEBUG=0, the debug code will
	be present but disabled -- but it can then be enabled for specific
	modules at load time with a 'pc_debug=#' option to insmod.
	*/

	#ifdef PCMCIA_DEBUG
	static int pc_debug = PCMCIA_DEBUG;
	module_param(pc_debug, int, 0);
	#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
	static char *version =
	"sedlbauer_cs.c 1.1a 2001/01/28 15:04:04 (M.Niemann)";
	#else
	#define DEBUG(n, args...)
	#endif


	/====================================================================/

	/* Parameters that can be set with 'insmod' */

	static int protocol = 2; /* EURO-ISDN Default */
	module_param(protocol, int, 0);

	/====================================================================/

	/*
	The event() function is this driver's Card Services event handler.
	It will be called by Card Services when an appropriate card status
	event is received. The config() and release() entry points are
	used to configure or release a socket, in response to card
	insertion and ejection events. They are invoked from the sedlbauer
	event handler.
	*/

	static int sedlbauer_config(struct pcmcia_device *link);
	static void sedlbauer_release(struct pcmcia_device *link);

	/*
	The attach() and detach() entry points are used to create and destroy
	"instances" of the driver, where each instance represents everything
	needed to manage one actual PCMCIA card.
	*/

	static void sedlbauer_detach(struct pcmcia_device *p_dev);

	/*
	You'll also need to prototype all the functions that will actually
	be used to talk to your device. See 'memory_cs' for a good example
	of a fully self-sufficient driver; the other drivers rely more or
	less on other parts of the kernel.
	*/

	/*
	A driver needs to provide a dev_node_t structure for each device
	on a card. In some cases, there is only one device per card (for
	example, ethernet cards, modems). In other cases, there may be
	many actual or logical devices (SCSI adapters, memory cards with
	multiple partitions). The dev_node_t structures need to be kept
	in a linked list starting at the 'dev' field of a struct pcmcia_device
	structure. We allocate them in the card's private data structure,
	because they generally shouldn't be allocated dynamically.

	In this case, we also provide a flag to indicate if a device is
	"stopped" due to a power management event, or card ejection. The
	device IO routines can use a flag like this to throttle IO to a
	card that is not ready to accept it.
	*/

	typedef struct local_info_t {
	struct pcmcia_device *p_dev;
	dev_node_t node;
	int stop;
	int cardnr;
	} local_info_t;

	/*======================================================================

	sedlbauer_attach() creates an "instance" of the driver, allocating
	local data structures for one device. The device is registered
	with Card Services.

	The dev_link structure is initialized, but we don't actually
	configure the card at this point -- we wait until we receive a
	card insertion event.

	======================================================================*/

	static int sedlbauer_probe(struct pcmcia_device *link)
	{
	local_info_t *local;

	DEBUG(0, "sedlbauer_attach()\n");

	/* Allocate space for private device-specific data */
	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
	if (!local) return -ENOMEM;
	local->cardnr = -1;

	local->p_dev = link;
	link->priv = local;

	/* Interrupt setup */
	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING\|IRQ_FIRST_SHARED;
	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
	link->irq.Handler = NULL;

	/*
	General socket configuration defaults can go here. In this
	client, we assume very little, and rely on the CIS for almost
	everything. In most clients, many details (i.e., number, sizes,
	and attributes of IO windows) are fixed by the nature of the
	device, and can be hard-wired here.
	*/

	/* from old sedl_cs
	*/
	/* The io structure describes IO port mapping */
	link->io.NumPorts1 = 8;
	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
	link->io.IOAddrLines = 3;

	link->conf.Attributes = 0;
	link->conf.IntType = INT_MEMORY_AND_IO;

	return sedlbauer_config(link);
	} /* sedlbauer_attach */

	/*======================================================================

	This deletes a driver "instance". The device is de-registered
	with Card Services. If it has been released, all local data
	structures are freed. Otherwise, the structures will be freed
	when the device is released.

	======================================================================*/

	static void sedlbauer_detach(struct pcmcia_device *link)
	{
	DEBUG(0, "sedlbauer_detach(0x%p)\n", link);

	((local_info_t *)link->priv)->stop = 1;
	sedlbauer_release(link);

	/* This points to the parent local_info_t struct */
	kfree(link->priv);
	} /* sedlbauer_detach */

	/*======================================================================

	sedlbauer_config() is scheduled to run after a CARD_INSERTION event
	is received, to configure the PCMCIA socket, and to make the
	device available to the system.

	======================================================================*/
	#define CS_CHECK(fn, ret) \
	do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)

	static int sedlbauer_config(struct pcmcia_device *link)
	{
	local_info_t *dev = link->priv;
	tuple_t tuple;
	cisparse_t parse;
	int last_fn, last_ret;
	u8 buf[64];
	config_info_t conf;
	win_req_t req;
	memreq_t map;
	IsdnCard_t icard;

	DEBUG(0, "sedlbauer_config(0x%p)\n", link);

	tuple.Attributes = 0;
	tuple.TupleData = buf;
	tuple.TupleDataMax = sizeof(buf);
	tuple.TupleOffset = 0;

	CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf));

	/*
	In this loop, we scan the CIS for configuration table entries,
	each of which describes a valid card configuration, including
	voltage, IO window, memory window, and interrupt settings.

	We make no assumptions about the card to be configured: we use
	just the information available in the CIS. In an ideal world,
	this would work for any PCMCIA card, but it requires a complete
	and accurate CIS. In practice, a driver usually "knows" most of
	these things without consulting the CIS, and most client drivers
	will only use the CIS to fill in implementation-defined details.
	*/
	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
	while (1) {
	cistpl_cftable_entry_t dflt = { 0 };
	cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
	if (pcmcia_get_tuple_data(link, &tuple) != 0 \|\|
	pcmcia_parse_tuple(link, &tuple, &parse) != 0)
	goto next_entry;

	if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
	if (cfg->index == 0) goto next_entry;
	link->conf.ConfigIndex = cfg->index;

	/* Does this card need audio output? */
	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
	link->conf.Attributes \|= CONF_ENABLE_SPKR;
	link->conf.Status = CCSR_AUDIO_ENA;
	}

	/* Use power settings for Vcc and Vpp if present */
	/* Note that the CIS values need to be rescaled */
	if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
	if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000)
	goto next_entry;
	} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
	if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000)
	goto next_entry;
	}

	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
	link->conf.Vpp =
	cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
	else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
	link->conf.Vpp =
	dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;

	/* Do we need to allocate an interrupt? */
	if (cfg->irq.IRQInfo1 \|\| dflt.irq.IRQInfo1)
	link->conf.Attributes \|= CONF_ENABLE_IRQ;

	/* IO window settings */
	link->io.NumPorts1 = link->io.NumPorts2 = 0;
	if ((cfg->io.nwin > 0) \|\| (dflt.io.nwin > 0)) {
	cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
	if (!(io->flags & CISTPL_IO_8BIT))
	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
	if (!(io->flags & CISTPL_IO_16BIT))
	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
	/* new in dummy.cs 2001/01/28 MN
	link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
	*/
	link->io.BasePort1 = io->win[0].base;
	link->io.NumPorts1 = io->win[0].len;
	if (io->nwin > 1) {
	link->io.Attributes2 = link->io.Attributes1;
	link->io.BasePort2 = io->win[1].base;
	link->io.NumPorts2 = io->win[1].len;
	}
	/* This reserves IO space but doesn't actually enable it */
	if (pcmcia_request_io(link, &link->io) != 0)
	goto next_entry;
	}

	/*
	Now set up a common memory window, if needed. There is room
	in the struct pcmcia_device structure for one memory window handle,
	but if the base addresses need to be saved, or if multiple
	windows are needed, the info should go in the private data
	structure for this device.

	Note that the memory window base is a physical address, and
	needs to be mapped to virtual space with ioremap() before it
	is used.
	*/
	if ((cfg->mem.nwin > 0) \|\| (dflt.mem.nwin > 0)) {
	cistpl_mem_t *mem =
	(cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
	req.Attributes = WIN_DATA_WIDTH_16\|WIN_MEMORY_TYPE_CM;
	req.Attributes \|= WIN_ENABLE;
	req.Base = mem->win[0].host_addr;
	req.Size = mem->win[0].len;
	/* new in dummy.cs 2001/01/28 MN
	if (req.Size < 0x1000)
	req.Size = 0x1000;
	*/
	req.AccessSpeed = 0;
	if (pcmcia_request_window(&link, &req, &link->win) != 0)
	goto next_entry;
	map.Page = 0; map.CardOffset = mem->win[0].card_addr;
	if (pcmcia_map_mem_page(link->win, &map) != 0)
	goto next_entry;
	}
	/* If we got this far, we're cool! */
	break;

	next_entry:
	CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
	}

	/*
	Allocate an interrupt line. Note that this does not assign a
	handler to the interrupt, unless the 'Handler' member of the
	irq structure is initialized.
	*/
	if (link->conf.Attributes & CONF_ENABLE_IRQ)
	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));

	/*
	This actually configures the PCMCIA socket -- setting up
	the I/O windows and the interrupt mapping, and putting the
	card and host interface into "Memory and IO" mode.
	*/
	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));

	/*
	At this point, the dev_node_t structure(s) need to be
	initialized and arranged in a linked list at link->dev.
	*/
	sprintf(dev->node.dev_name, "sedlbauer");
	dev->node.major = dev->node.minor = 0;
	link->dev_node = &dev->node;

	/* Finally, report what we've done */
	printk(KERN_INFO "%s: index 0x%02x:",
	dev->node.dev_name, link->conf.ConfigIndex);
	if (link->conf.Vpp)
	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
	if (link->conf.Attributes & CONF_ENABLE_IRQ)
	printk(", irq %d", link->irq.AssignedIRQ);
	if (link->io.NumPorts1)
	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
	link->io.BasePort1+link->io.NumPorts1-1);
	if (link->io.NumPorts2)
	printk(" & 0x%04x-0x%04x", link->io.BasePort2,
	link->io.BasePort2+link->io.NumPorts2-1);
	if (link->win)
	printk(", mem 0x%06lx-0x%06lx", req.Base,
	req.Base+req.Size-1);
	printk("\n");

	icard.para[0] = link->irq.AssignedIRQ;
	icard.para[1] = link->io.BasePort1;
	icard.protocol = protocol;
	icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;

	last_ret = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->stop), &icard);
	if (last_ret < 0) {
	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
	last_ret, link->io.BasePort1);
	sedlbauer_release(link);
	return -ENODEV;
	} else
	((local_info_t*)link->priv)->cardnr = last_ret;

	return 0;

	cs_failed:
	cs_error(link, last_fn, last_ret);
	sedlbauer_release(link);
	return -ENODEV;

	} /* sedlbauer_config */

	/*======================================================================

	After a card is removed, sedlbauer_release() will unregister the
	device, and release the PCMCIA configuration. If the device is
	still open, this will be postponed until it is closed.

	======================================================================*/

	static void sedlbauer_release(struct pcmcia_device *link)
	{
	local_info_t *local = link->priv;
	DEBUG(0, "sedlbauer_release(0x%p)\n", link);

	if (local) {
	if (local->cardnr >= 0) {
	/* no unregister function with hisax */
	HiSax_closecard(local->cardnr);
	}
	}

	pcmcia_disable_device(link);
	} /* sedlbauer_release */

	static int sedlbauer_suspend(struct pcmcia_device *link)
	{
	local_info_t *dev = link->priv;

	dev->stop = 1;

	return 0;
	}

	static int sedlbauer_resume(struct pcmcia_device *link)
	{
	local_info_t *dev = link->priv;

	dev->stop = 0;

	return 0;
	}


	static struct pcmcia_device_id sedlbauer_ids[] = {
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "speed star II", "V 3.1", 0x81fb79f5, 0xf3612e1d, 0x6b95c78a),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D67", 0x81fb79f5, 0xe4e9bc12, 0x397b7e90),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", "4D98", 0x81fb79f5, 0xe4e9bc12, 0x2e5c7fce),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (C) 93-94 VK", 0x81fb79f5, 0xe4e9bc12, 0x8db143fe),
	PCMCIA_DEVICE_PROD_ID123("SEDLBAUER", "ISDN-Adapter", " (c) 93-95 VK", 0x81fb79f5, 0xe4e9bc12, 0xb391ab4c),
	PCMCIA_DEVICE_PROD_ID12("HST High Soft Tech GmbH", "Saphir II B", 0xd79e0b84, 0x21d083ae),
	/* PCMCIA_DEVICE_PROD_ID1234("SEDLBAUER", 0x81fb79f5), / / too generic*/
	PCMCIA_DEVICE_NULL
	};
	MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids);

	static struct pcmcia_driver sedlbauer_driver = {
	.owner = THIS_MODULE,
	.drv = {
	.name = "sedlbauer_cs",
	},
	.probe = sedlbauer_probe,
	.remove = sedlbauer_detach,
	.id_table = sedlbauer_ids,
	.suspend = sedlbauer_suspend,
	.resume = sedlbauer_resume,
	};

	static int __init init_sedlbauer_cs(void)
	{
	return pcmcia_register_driver(&sedlbauer_driver);
	}

	static void __exit exit_sedlbauer_cs(void)
	{
	pcmcia_unregister_driver(&sedlbauer_driver);
	}

	module_init(init_sedlbauer_cs);
	module_exit(exit_sedlbauer_cs);