drivers/mmc/host/msm_sdcc_dml.c - kernel/msm - Gitiles

 /*
  * linux/drivers/mmc/host/msm_sdcc_dml.c - Qualcomm MSM SDCC DML Driver
  *
  * Copyright (c) 2011, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */

 #include <linux/io.h>
 #include <asm/sizes.h>
 #include <mach/msm_iomap.h>

 #include "msm_sdcc_dml.h"

 /*
  * DML registers definations
  */

 /* DML config register defination */
 #define DML_CONFIG 0x0000
 #define PRODUCER_CRCI_DIS   0x00
 #define PRODUCER_CRCI_X_SEL 0x01
 #define PRODUCER_CRCI_Y_SEL 0x02
 #define PRODUCER_CRCI_MSK   0x3
 #define CONSUMER_CRCI_DIS   (0x00 << 2)
 #define CONSUMER_CRCI_X_SEL (0x01 << 2)
 #define CONSUMER_CRCI_Y_SEL (0x02 << 2)
 #define CONSUMER_CRCI_MSK   (0x3 << 2)
 #define PRODUCER_TRANS_END_EN (1 << 4)
 #define BYPASS (1 << 16)
 #define DIRECT_MODE (1 << 17)
 #define INFINITE_CONS_TRANS (1 << 18)

 /* DML status register defination */
 #define DML_STATUS 0x0004
 #define PRODUCER_IDLE (1 << 0)
 #define CONSUMER_IDLE (1 << 16)

 /*
  * DML SW RESET register defination
  * NOTE: write to this register resets the DML core.
  * All internal state information will be lost and all
  * register values will be reset as well
  */
 #define DML_SW_RESET 0x0008

 /*
  * DML PRODUCER START register defination
  * NOTE: A write to this register triggers the DML
  * Producer state machine. No SW register values will be
  * altered.
  */
 #define DML_PRODUCER_START 0x000C

 /*
  * DML CONSUMER START register defination
  * NOTE: A write to this register triggers the DML
  * Consumer state machine. No SW register values will be
  * altered.
  */
 #define DML_CONSUMER_START 0x0010

 /*
  * DML producer pipe logical size register defination
  * NOTE: This register holds the size of the producer pipe
  * (in units of bytes) _to_ which the peripheral can
  * keep writing data to when its the PRODUCER.
  */
 #define DML_PRODUCER_PIPE_LOGICAL_SIZE 0x0014

 /*
  * DML producer pipe logical size register defination
  * NOTE: This register holds the size of the consumer pipe
  * (in units of bytes) _from_ which the peripheral
  * can keep _reading_ data from when its the CONSUMER.
  */
 #define DML_CONSUMER_PIPE_LOGICAL_SIZE 0x00018

 /*
  * DML PIPE ID register
  * This register holds pipe IDs that services
  * the producer and consumer side of the peripheral
  */
 #define DML_PIPE_ID 0x0001C
 #define PRODUCER_PIPE_ID_SHFT 0
 #define PRODUCER_PIPE_ID_MSK 0x1f
 #define CONSUMER_PIPE_ID_SHFT 16
 #define CONSUMER_PIPE_ID_MSK (0x1f << 16)

 /*
  * DML Producer trackers register defination.
  * This register is for debug purposes only. They reflect
  * the value of the producer block and transaction counters
  * when read. The values may be dynamically changing when
  * a transaction is in progress.
  */
 #define DML_PRODUCER_TRACKERS 0x00020
 #define PROD_BLOCK_CNT_SHFT 0
 #define PROD_BLOCK_CNT_MSK  0xffff
 #define PROD_TRANS_CNT_SHFT 16
 #define PROD_TRANS_CNT_MSK  (0xffff << 16)

 /*
  * DML Producer BAM block size register defination.
  * This regsiter holds the block size, in units of bytes,
  * associated with the Producer BAM. The DML asserts the
  * block_end side band signal to the BAM whenever the producer
  * side of the peripheral has generated the said amount of data.
  * This register value should be an integral multiple of the
  * Producer CRCI Block Size.
  */
 #define DML_PRODUCER_BAM_BLOCK_SIZE 0x00024

 /*
  * DML Producer BAM Transaction size defination.
  * This regsiter holds the transaction size, in units of bytes,
  * associated with the Producer BAM. The DML asserts the transaction_end
  * side band signal to the BAM whenever the producer side of the peripheral
  * has generated the said amount of data.
  */
 #define DML_PRODUCER_BAM_TRANS_SIZE 0x00028

 /*
  * DML Direct mode base address defination
  * This register is used whenever the DIRECT_MODE bit
  * in config register is set.
  */
 #define DML_DIRECT_MODE_BASE_ADDR 0x002C
 #define PRODUCER_BASE_ADDR_BSHFT 0
 #define PRODUCER_BASE_ADDR_BMSK  0xffff
 #define CONSUMER_BASE_ADDR_BSHFT 16
 #define CONSUMER_BASE_ADDR_BMSK  (0xffff << 16)

 /*
  * DMA Debug and status register defination.
  * These are the read-only registers useful debugging.
  */
 #define DML_DEBUG 0x0030
 #define DML_BAM_SIDE_STATUS_1 0x0034
 #define DML_BAM_SIDE_STATUS_2 0x0038

 /* other definations */
 #define PRODUCER_PIPE_LOGICAL_SIZE 4096
 #define CONSUMER_PIPE_LOGICAL_SIZE 4096

 #ifdef CONFIG_MMC_MSM_SPS_SUPPORT
 /**
  * Initialize DML HW connected with SDCC core
  *
  */
 int msmsdcc_dml_init(struct msmsdcc_host *host)
 {
 	int rc = 0;
 	u32 config = 0;
 	void __iomem *dml_base;

 	if (!host->dml_base) {
 		host->dml_base = ioremap(host->dml_memres->start,
 					resource_size(host->dml_memres));
 		if (!host->dml_base) {
 			pr_err("%s: DML ioremap() failed!!! %pr\n",
 				mmc_hostname(host->mmc), host->dml_memres);
 			rc = -ENOMEM;
 			goto out;
 		}
 		pr_info("%s: Qualcomm MSM SDCC-DML %pr\n",
 			mmc_hostname(host->mmc), host->dml_memres);
 	}

 	dml_base = host->dml_base;
 	/* Reset the DML block */
 	writel_relaxed(1, (dml_base + DML_SW_RESET));

 	/* Disable the producer and consumer CRCI */
 	config = (PRODUCER_CRCI_DIS | CONSUMER_CRCI_DIS);
 	/*
 	 * Disable the bypass mode. Bypass mode will only be used
 	 * if data transfer is to happen in PIO mode and don't
 	 * want the BAM interface to connect with SDCC-DML.
 	 */
 	config &= ~BYPASS;
 	/*
 	 * Disable direct mode as we don't DML to MASTER the AHB bus.
 	 * BAM connected with DML should MASTER the AHB bus.
 	 */
 	config &= ~DIRECT_MODE;
 	/*
 	 * Disable infinite mode transfer as we won't be doing any
 	 * infinite size data transfers. All data transfer will be
 	 * of finite data size.
 	 */
 	config &= ~INFINITE_CONS_TRANS;
 	writel_relaxed(config, (dml_base + DML_CONFIG));

 	/*
 	 * Initialize the logical BAM pipe size for producer
 	 * and consumer.
 	 */
 	writel_relaxed(PRODUCER_PIPE_LOGICAL_SIZE,
 		(dml_base + DML_PRODUCER_PIPE_LOGICAL_SIZE));
 	writel_relaxed(CONSUMER_PIPE_LOGICAL_SIZE,
 		(dml_base + DML_CONSUMER_PIPE_LOGICAL_SIZE));

 	/* Initialize Producer/consumer pipe id */
 	writel_relaxed(host->sps.src_pipe_index |
 		(host->sps.dest_pipe_index << CONSUMER_PIPE_ID_SHFT),
 		(dml_base + DML_PIPE_ID));
 	mb();
 out:
 	return rc;
 }

 /**
  * Soft reset DML HW
  *
  */
 void msmsdcc_dml_reset(struct msmsdcc_host *host)
 {
 	/* Reset the DML block */
 	writel_relaxed(1, (host->dml_base + DML_SW_RESET));
 	mb();
 }

 /**
  * Checks if DML HW is busy or not?
  *
  */
 bool msmsdcc_is_dml_busy(struct msmsdcc_host *host)
 {
 	return !(readl_relaxed(host->dml_base + DML_STATUS) & PRODUCER_IDLE) ||
 		!(readl_relaxed(host->dml_base + DML_STATUS) & CONSUMER_IDLE);
 }

 /**
  * Start data transfer.
  *
  */
 void msmsdcc_dml_start_xfer(struct msmsdcc_host *host, struct mmc_data *data)
 {
 	u32 config;
 	void __iomem *dml_base = host->dml_base;

 	if (data->flags & MMC_DATA_READ) {
 		/* Read operation: configure DML for producer operation */
 		/* Set producer CRCI-x and disable consumer CRCI */
 		config = readl_relaxed(dml_base + DML_CONFIG);
 		config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_X_SEL;
 		config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_DIS;
 		writel_relaxed(config, (dml_base + DML_CONFIG));

 		/* Set the Producer BAM block size */
 		writel_relaxed(data->blksz, (dml_base +
 					DML_PRODUCER_BAM_BLOCK_SIZE));

 		/* Set Producer BAM Transaction size */
 		writel_relaxed(host->curr.xfer_size,
 			(dml_base + DML_PRODUCER_BAM_TRANS_SIZE));
 		/* Set Producer Transaction End bit */
 		writel_relaxed((readl_relaxed(dml_base + DML_CONFIG)
 			| PRODUCER_TRANS_END_EN),
 			(dml_base + DML_CONFIG));
 		/* Trigger producer */
 		writel_relaxed(1, (dml_base + DML_PRODUCER_START));
 	} else {
 		/* Write operation: configure DML for consumer operation */
 		/* Set consumer CRCI-x and disable producer CRCI*/
 		config = readl_relaxed(dml_base + DML_CONFIG);
 		config = (config & ~CONSUMER_CRCI_MSK) | CONSUMER_CRCI_X_SEL;
 		config = (config & ~PRODUCER_CRCI_MSK) | PRODUCER_CRCI_DIS;
 		writel_relaxed(config, (dml_base + DML_CONFIG));
 		/* Clear Producer Transaction End bit */
 		writel_relaxed((readl_relaxed(dml_base + DML_CONFIG)
 			& ~PRODUCER_TRANS_END_EN),
 			(dml_base + DML_CONFIG));
 		/* Trigger consumer */
 		writel_relaxed(1, (dml_base + DML_CONSUMER_START));
 	}
 	mb();
 }

 /**
  * Deinitialize DML HW connected with SDCC core
  *
  */
 void msmsdcc_dml_exit(struct msmsdcc_host *host)
 {
 	/* Put DML block in reset state before exiting */
 	msmsdcc_dml_reset(host);
 	iounmap(host->dml_base);
 }
 #endif /* CONFIG_MMC_MSM_SPS_SUPPORT */
	/*
	* linux/drivers/mmc/host/msm_sdcc_dml.c - Qualcomm MSM SDCC DML Driver
	*
	* Copyright (c) 2011, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/

	#include <linux/io.h>
	#include <asm/sizes.h>
	#include <mach/msm_iomap.h>

	#include "msm_sdcc_dml.h"

	/*
	* DML registers definations
	*/

	/* DML config register defination */
	#define DML_CONFIG 0x0000
	#define PRODUCER_CRCI_DIS 0x00
	#define PRODUCER_CRCI_X_SEL 0x01
	#define PRODUCER_CRCI_Y_SEL 0x02
	#define PRODUCER_CRCI_MSK 0x3
	#define CONSUMER_CRCI_DIS (0x00 << 2)
	#define CONSUMER_CRCI_X_SEL (0x01 << 2)
	#define CONSUMER_CRCI_Y_SEL (0x02 << 2)
	#define CONSUMER_CRCI_MSK (0x3 << 2)
	#define PRODUCER_TRANS_END_EN (1 << 4)
	#define BYPASS (1 << 16)
	#define DIRECT_MODE (1 << 17)
	#define INFINITE_CONS_TRANS (1 << 18)

	/* DML status register defination */
	#define DML_STATUS 0x0004
	#define PRODUCER_IDLE (1 << 0)
	#define CONSUMER_IDLE (1 << 16)

	/*
	* DML SW RESET register defination
	* NOTE: write to this register resets the DML core.
	* All internal state information will be lost and all
	* register values will be reset as well
	*/
	#define DML_SW_RESET 0x0008

	/*
	* DML PRODUCER START register defination
	* NOTE: A write to this register triggers the DML
	* Producer state machine. No SW register values will be
	* altered.
	*/
	#define DML_PRODUCER_START 0x000C

	/*
	* DML CONSUMER START register defination
	* NOTE: A write to this register triggers the DML
	* Consumer state machine. No SW register values will be
	* altered.
	*/
	#define DML_CONSUMER_START 0x0010

	/*
	* DML producer pipe logical size register defination
	* NOTE: This register holds the size of the producer pipe
	* (in units of bytes) _to_ which the peripheral can
	* keep writing data to when its the PRODUCER.
	*/
	#define DML_PRODUCER_PIPE_LOGICAL_SIZE 0x0014

	/*
	* DML producer pipe logical size register defination
	* NOTE: This register holds the size of the consumer pipe
	* (in units of bytes) _from_ which the peripheral
	* can keep _reading_ data from when its the CONSUMER.
	*/
	#define DML_CONSUMER_PIPE_LOGICAL_SIZE 0x00018

	/*
	* DML PIPE ID register
	* This register holds pipe IDs that services
	* the producer and consumer side of the peripheral
	*/
	#define DML_PIPE_ID 0x0001C
	#define PRODUCER_PIPE_ID_SHFT 0
	#define PRODUCER_PIPE_ID_MSK 0x1f
	#define CONSUMER_PIPE_ID_SHFT 16
	#define CONSUMER_PIPE_ID_MSK (0x1f << 16)

	/*
	* DML Producer trackers register defination.
	* This register is for debug purposes only. They reflect
	* the value of the producer block and transaction counters
	* when read. The values may be dynamically changing when
	* a transaction is in progress.
	*/
	#define DML_PRODUCER_TRACKERS 0x00020
	#define PROD_BLOCK_CNT_SHFT 0
	#define PROD_BLOCK_CNT_MSK 0xffff
	#define PROD_TRANS_CNT_SHFT 16
	#define PROD_TRANS_CNT_MSK (0xffff << 16)

	/*
	* DML Producer BAM block size register defination.
	* This regsiter holds the block size, in units of bytes,
	* associated with the Producer BAM. The DML asserts the
	* block_end side band signal to the BAM whenever the producer
	* side of the peripheral has generated the said amount of data.
	* This register value should be an integral multiple of the
	* Producer CRCI Block Size.
	*/
	#define DML_PRODUCER_BAM_BLOCK_SIZE 0x00024

	/*
	* DML Producer BAM Transaction size defination.
	* This regsiter holds the transaction size, in units of bytes,
	* associated with the Producer BAM. The DML asserts the transaction_end
	* side band signal to the BAM whenever the producer side of the peripheral
	* has generated the said amount of data.
	*/
	#define DML_PRODUCER_BAM_TRANS_SIZE 0x00028

	/*
	* DML Direct mode base address defination
	* This register is used whenever the DIRECT_MODE bit
	* in config register is set.
	*/
	#define DML_DIRECT_MODE_BASE_ADDR 0x002C
	#define PRODUCER_BASE_ADDR_BSHFT 0
	#define PRODUCER_BASE_ADDR_BMSK 0xffff
	#define CONSUMER_BASE_ADDR_BSHFT 16
	#define CONSUMER_BASE_ADDR_BMSK (0xffff << 16)

	/*
	* DMA Debug and status register defination.
	* These are the read-only registers useful debugging.
	*/
	#define DML_DEBUG 0x0030
	#define DML_BAM_SIDE_STATUS_1 0x0034
	#define DML_BAM_SIDE_STATUS_2 0x0038

	/* other definations */
	#define PRODUCER_PIPE_LOGICAL_SIZE 4096
	#define CONSUMER_PIPE_LOGICAL_SIZE 4096

	#ifdef CONFIG_MMC_MSM_SPS_SUPPORT
	/**
	* Initialize DML HW connected with SDCC core
	*
	*/
	int msmsdcc_dml_init(struct msmsdcc_host *host)
	{
	int rc = 0;
	u32 config = 0;
	void __iomem *dml_base;

	if (!host->dml_base) {
	host->dml_base = ioremap(host->dml_memres->start,
	resource_size(host->dml_memres));
	if (!host->dml_base) {
	pr_err("%s: DML ioremap() failed!!! %pr\n",
	mmc_hostname(host->mmc), host->dml_memres);
	rc = -ENOMEM;
	goto out;
	}
	pr_info("%s: Qualcomm MSM SDCC-DML %pr\n",
	mmc_hostname(host->mmc), host->dml_memres);
	}

	dml_base = host->dml_base;
	/* Reset the DML block */
	writel_relaxed(1, (dml_base + DML_SW_RESET));

	/* Disable the producer and consumer CRCI */
	config = (PRODUCER_CRCI_DIS \| CONSUMER_CRCI_DIS);
	/*
	* Disable the bypass mode. Bypass mode will only be used
	* if data transfer is to happen in PIO mode and don't
	* want the BAM interface to connect with SDCC-DML.
	*/
	config &= ~BYPASS;
	/*
	* Disable direct mode as we don't DML to MASTER the AHB bus.
	* BAM connected with DML should MASTER the AHB bus.
	*/
	config &= ~DIRECT_MODE;
	/*
	* Disable infinite mode transfer as we won't be doing any
	* infinite size data transfers. All data transfer will be
	* of finite data size.
	*/
	config &= ~INFINITE_CONS_TRANS;
	writel_relaxed(config, (dml_base + DML_CONFIG));

	/*
	* Initialize the logical BAM pipe size for producer
	* and consumer.
	*/
	writel_relaxed(PRODUCER_PIPE_LOGICAL_SIZE,
	(dml_base + DML_PRODUCER_PIPE_LOGICAL_SIZE));
	writel_relaxed(CONSUMER_PIPE_LOGICAL_SIZE,
	(dml_base + DML_CONSUMER_PIPE_LOGICAL_SIZE));

	/* Initialize Producer/consumer pipe id */
	writel_relaxed(host->sps.src_pipe_index \|
	(host->sps.dest_pipe_index << CONSUMER_PIPE_ID_SHFT),
	(dml_base + DML_PIPE_ID));
	mb();
	out:
	return rc;
	}

	/**
	* Soft reset DML HW
	*
	*/
	void msmsdcc_dml_reset(struct msmsdcc_host *host)
	{
	/* Reset the DML block */
	writel_relaxed(1, (host->dml_base + DML_SW_RESET));
	mb();
	}

	/**
	* Checks if DML HW is busy or not?
	*
	*/
	bool msmsdcc_is_dml_busy(struct msmsdcc_host *host)
	{
	return !(readl_relaxed(host->dml_base + DML_STATUS) & PRODUCER_IDLE) \|\|
	!(readl_relaxed(host->dml_base + DML_STATUS) & CONSUMER_IDLE);
	}

	/**
	* Start data transfer.
	*
	*/
	void msmsdcc_dml_start_xfer(struct msmsdcc_host host, struct mmc_data data)
	{
	u32 config;
	void __iomem *dml_base = host->dml_base;

	if (data->flags & MMC_DATA_READ) {
	/* Read operation: configure DML for producer operation */
	/* Set producer CRCI-x and disable consumer CRCI */
	config = readl_relaxed(dml_base + DML_CONFIG);
	config = (config & ~PRODUCER_CRCI_MSK) \| PRODUCER_CRCI_X_SEL;
	config = (config & ~CONSUMER_CRCI_MSK) \| CONSUMER_CRCI_DIS;
	writel_relaxed(config, (dml_base + DML_CONFIG));

	/* Set the Producer BAM block size */
	writel_relaxed(data->blksz, (dml_base +
	DML_PRODUCER_BAM_BLOCK_SIZE));

	/* Set Producer BAM Transaction size */
	writel_relaxed(host->curr.xfer_size,
	(dml_base + DML_PRODUCER_BAM_TRANS_SIZE));
	/* Set Producer Transaction End bit */
	writel_relaxed((readl_relaxed(dml_base + DML_CONFIG)
	\| PRODUCER_TRANS_END_EN),
	(dml_base + DML_CONFIG));
	/* Trigger producer */
	writel_relaxed(1, (dml_base + DML_PRODUCER_START));
	} else {
	/* Write operation: configure DML for consumer operation */
	/* Set consumer CRCI-x and disable producer CRCI*/
	config = readl_relaxed(dml_base + DML_CONFIG);
	config = (config & ~CONSUMER_CRCI_MSK) \| CONSUMER_CRCI_X_SEL;
	config = (config & ~PRODUCER_CRCI_MSK) \| PRODUCER_CRCI_DIS;
	writel_relaxed(config, (dml_base + DML_CONFIG));
	/* Clear Producer Transaction End bit */
	writel_relaxed((readl_relaxed(dml_base + DML_CONFIG)
	& ~PRODUCER_TRANS_END_EN),
	(dml_base + DML_CONFIG));
	/* Trigger consumer */
	writel_relaxed(1, (dml_base + DML_CONSUMER_START));
	}
	mb();
	}

	/**
	* Deinitialize DML HW connected with SDCC core
	*
	*/
	void msmsdcc_dml_exit(struct msmsdcc_host *host)
	{
	/* Put DML block in reset state before exiting */
	msmsdcc_dml_reset(host);
	iounmap(host->dml_base);
	}
	#endif /* CONFIG_MMC_MSM_SPS_SUPPORT */