| /****************************************************************************** |
| * |
| * Module Name: psparse - Parser top level AML parse routines |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2007, R. Byron Moore |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| /* |
| * Parse the AML and build an operation tree as most interpreters, |
| * like Perl, do. Parsing is done by hand rather than with a YACC |
| * generated parser to tightly constrain stack and dynamic memory |
| * usage. At the same time, parsing is kept flexible and the code |
| * fairly compact by parsing based on a list of AML opcode |
| * templates in aml_op_info[] |
| */ |
| |
| #include <acpi/acpi.h> |
| #include <acpi/acparser.h> |
| #include <acpi/acdispat.h> |
| #include <acpi/amlcode.h> |
| #include <acpi/acnamesp.h> |
| #include <acpi/acinterp.h> |
| |
| #define _COMPONENT ACPI_PARSER |
| ACPI_MODULE_NAME("psparse") |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ps_get_opcode_size |
| * |
| * PARAMETERS: Opcode - An AML opcode |
| * |
| * RETURN: Size of the opcode, in bytes (1 or 2) |
| * |
| * DESCRIPTION: Get the size of the current opcode. |
| * |
| ******************************************************************************/ |
| u32 acpi_ps_get_opcode_size(u32 opcode) |
| { |
| |
| /* Extended (2-byte) opcode if > 255 */ |
| |
| if (opcode > 0x00FF) { |
| return (2); |
| } |
| |
| /* Otherwise, just a single byte opcode */ |
| |
| return (1); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ps_peek_opcode |
| * |
| * PARAMETERS: parser_state - A parser state object |
| * |
| * RETURN: Next AML opcode |
| * |
| * DESCRIPTION: Get next AML opcode (without incrementing AML pointer) |
| * |
| ******************************************************************************/ |
| |
| u16 acpi_ps_peek_opcode(struct acpi_parse_state * parser_state) |
| { |
| u8 *aml; |
| u16 opcode; |
| |
| aml = parser_state->aml; |
| opcode = (u16) ACPI_GET8(aml); |
| |
| if (opcode == AML_EXTENDED_OP_PREFIX) { |
| |
| /* Extended opcode, get the second opcode byte */ |
| |
| aml++; |
| opcode = (u16) ((opcode << 8) | ACPI_GET8(aml)); |
| } |
| |
| return (opcode); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ps_complete_this_op |
| * |
| * PARAMETERS: walk_state - Current State |
| * Op - Op to complete |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Perform any cleanup at the completion of an Op. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ps_complete_this_op(struct acpi_walk_state * walk_state, |
| union acpi_parse_object * op) |
| { |
| union acpi_parse_object *prev; |
| union acpi_parse_object *next; |
| const struct acpi_opcode_info *parent_info; |
| union acpi_parse_object *replacement_op = NULL; |
| |
| ACPI_FUNCTION_TRACE_PTR(ps_complete_this_op, op); |
| |
| /* Check for null Op, can happen if AML code is corrupt */ |
| |
| if (!op) { |
| return_ACPI_STATUS(AE_OK); /* OK for now */ |
| } |
| |
| /* Delete this op and the subtree below it if asked to */ |
| |
| if (((walk_state->parse_flags & ACPI_PARSE_TREE_MASK) != |
| ACPI_PARSE_DELETE_TREE) |
| || (walk_state->op_info->class == AML_CLASS_ARGUMENT)) { |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /* Make sure that we only delete this subtree */ |
| |
| if (op->common.parent) { |
| prev = op->common.parent->common.value.arg; |
| if (!prev) { |
| |
| /* Nothing more to do */ |
| |
| goto cleanup; |
| } |
| |
| /* |
| * Check if we need to replace the operator and its subtree |
| * with a return value op (placeholder op) |
| */ |
| parent_info = |
| acpi_ps_get_opcode_info(op->common.parent->common. |
| aml_opcode); |
| |
| switch (parent_info->class) { |
| case AML_CLASS_CONTROL: |
| break; |
| |
| case AML_CLASS_CREATE: |
| |
| /* |
| * These opcodes contain term_arg operands. The current |
| * op must be replaced by a placeholder return op |
| */ |
| replacement_op = |
| acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP); |
| if (!replacement_op) { |
| goto allocate_error; |
| } |
| break; |
| |
| case AML_CLASS_NAMED_OBJECT: |
| |
| /* |
| * These opcodes contain term_arg operands. The current |
| * op must be replaced by a placeholder return op |
| */ |
| if ((op->common.parent->common.aml_opcode == |
| AML_REGION_OP) |
| || (op->common.parent->common.aml_opcode == |
| AML_DATA_REGION_OP) |
| || (op->common.parent->common.aml_opcode == |
| AML_BUFFER_OP) |
| || (op->common.parent->common.aml_opcode == |
| AML_PACKAGE_OP) |
| || (op->common.parent->common.aml_opcode == |
| AML_VAR_PACKAGE_OP)) { |
| replacement_op = |
| acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP); |
| if (!replacement_op) { |
| goto allocate_error; |
| } |
| } else |
| if ((op->common.parent->common.aml_opcode == |
| AML_NAME_OP) |
| && (walk_state->pass_number <= |
| ACPI_IMODE_LOAD_PASS2)) { |
| if ((op->common.aml_opcode == AML_BUFFER_OP) |
| || (op->common.aml_opcode == AML_PACKAGE_OP) |
| || (op->common.aml_opcode == |
| AML_VAR_PACKAGE_OP)) { |
| replacement_op = |
| acpi_ps_alloc_op(op->common. |
| aml_opcode); |
| if (!replacement_op) { |
| goto allocate_error; |
| } |
| |
| replacement_op->named.data = |
| op->named.data; |
| replacement_op->named.length = |
| op->named.length; |
| } |
| } |
| break; |
| |
| default: |
| |
| replacement_op = |
| acpi_ps_alloc_op(AML_INT_RETURN_VALUE_OP); |
| if (!replacement_op) { |
| goto allocate_error; |
| } |
| } |
| |
| /* We must unlink this op from the parent tree */ |
| |
| if (prev == op) { |
| |
| /* This op is the first in the list */ |
| |
| if (replacement_op) { |
| replacement_op->common.parent = |
| op->common.parent; |
| replacement_op->common.value.arg = NULL; |
| replacement_op->common.node = op->common.node; |
| op->common.parent->common.value.arg = |
| replacement_op; |
| replacement_op->common.next = op->common.next; |
| } else { |
| op->common.parent->common.value.arg = |
| op->common.next; |
| } |
| } |
| |
| /* Search the parent list */ |
| |
| else |
| while (prev) { |
| |
| /* Traverse all siblings in the parent's argument list */ |
| |
| next = prev->common.next; |
| if (next == op) { |
| if (replacement_op) { |
| replacement_op->common.parent = |
| op->common.parent; |
| replacement_op->common.value. |
| arg = NULL; |
| replacement_op->common.node = |
| op->common.node; |
| prev->common.next = |
| replacement_op; |
| replacement_op->common.next = |
| op->common.next; |
| next = NULL; |
| } else { |
| prev->common.next = |
| op->common.next; |
| next = NULL; |
| } |
| } |
| prev = next; |
| } |
| } |
| |
| cleanup: |
| |
| /* Now we can actually delete the subtree rooted at Op */ |
| |
| acpi_ps_delete_parse_tree(op); |
| return_ACPI_STATUS(AE_OK); |
| |
| allocate_error: |
| |
| /* Always delete the subtree, even on error */ |
| |
| acpi_ps_delete_parse_tree(op); |
| return_ACPI_STATUS(AE_NO_MEMORY); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ps_next_parse_state |
| * |
| * PARAMETERS: walk_state - Current state |
| * Op - Current parse op |
| * callback_status - Status from previous operation |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Update the parser state based upon the return exception from |
| * the parser callback. |
| * |
| ******************************************************************************/ |
| |
| acpi_status |
| acpi_ps_next_parse_state(struct acpi_walk_state *walk_state, |
| union acpi_parse_object *op, |
| acpi_status callback_status) |
| { |
| struct acpi_parse_state *parser_state = &walk_state->parser_state; |
| acpi_status status = AE_CTRL_PENDING; |
| |
| ACPI_FUNCTION_TRACE_PTR(ps_next_parse_state, op); |
| |
| switch (callback_status) { |
| case AE_CTRL_TERMINATE: |
| /* |
| * A control method was terminated via a RETURN statement. |
| * The walk of this method is complete. |
| */ |
| parser_state->aml = parser_state->aml_end; |
| status = AE_CTRL_TERMINATE; |
| break; |
| |
| case AE_CTRL_BREAK: |
| |
| parser_state->aml = walk_state->aml_last_while; |
| walk_state->control_state->common.value = FALSE; |
| status = acpi_ds_result_stack_pop(walk_state); |
| if (ACPI_SUCCESS(status)) { |
| status = AE_CTRL_BREAK; |
| } |
| break; |
| |
| case AE_CTRL_CONTINUE: |
| |
| parser_state->aml = walk_state->aml_last_while; |
| status = acpi_ds_result_stack_pop(walk_state); |
| if (ACPI_SUCCESS(status)) { |
| status = AE_CTRL_CONTINUE; |
| } |
| break; |
| |
| case AE_CTRL_PENDING: |
| |
| parser_state->aml = walk_state->aml_last_while; |
| break; |
| |
| #if 0 |
| case AE_CTRL_SKIP: |
| |
| parser_state->aml = parser_state->scope->parse_scope.pkg_end; |
| status = AE_OK; |
| break; |
| #endif |
| |
| case AE_CTRL_TRUE: |
| /* |
| * Predicate of an IF was true, and we are at the matching ELSE. |
| * Just close out this package |
| */ |
| parser_state->aml = acpi_ps_get_next_package_end(parser_state); |
| status = acpi_ds_result_stack_pop(walk_state); |
| if (ACPI_SUCCESS(status)) { |
| status = AE_CTRL_PENDING; |
| } |
| break; |
| |
| case AE_CTRL_FALSE: |
| /* |
| * Either an IF/WHILE Predicate was false or we encountered a BREAK |
| * opcode. In both cases, we do not execute the rest of the |
| * package; We simply close out the parent (finishing the walk of |
| * this branch of the tree) and continue execution at the parent |
| * level. |
| */ |
| parser_state->aml = parser_state->scope->parse_scope.pkg_end; |
| |
| /* In the case of a BREAK, just force a predicate (if any) to FALSE */ |
| |
| walk_state->control_state->common.value = FALSE; |
| status = AE_CTRL_END; |
| break; |
| |
| case AE_CTRL_TRANSFER: |
| |
| /* A method call (invocation) -- transfer control */ |
| |
| status = AE_CTRL_TRANSFER; |
| walk_state->prev_op = op; |
| walk_state->method_call_op = op; |
| walk_state->method_call_node = |
| (op->common.value.arg)->common.node; |
| |
| /* Will return value (if any) be used by the caller? */ |
| |
| walk_state->return_used = |
| acpi_ds_is_result_used(op, walk_state); |
| break; |
| |
| default: |
| |
| status = callback_status; |
| if ((callback_status & AE_CODE_MASK) == AE_CODE_CONTROL) { |
| status = AE_OK; |
| } |
| break; |
| } |
| |
| return_ACPI_STATUS(status); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_ps_parse_aml |
| * |
| * PARAMETERS: walk_state - Current state |
| * |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Parse raw AML and return a tree of ops |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state) |
| { |
| acpi_status status; |
| struct acpi_thread_state *thread; |
| struct acpi_thread_state *prev_walk_list = acpi_gbl_current_walk_list; |
| struct acpi_walk_state *previous_walk_state; |
| |
| ACPI_FUNCTION_TRACE(ps_parse_aml); |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_PARSE, |
| "Entered with WalkState=%p Aml=%p size=%X\n", |
| walk_state, walk_state->parser_state.aml, |
| walk_state->parser_state.aml_size)); |
| |
| /* Create and initialize a new thread state */ |
| |
| thread = acpi_ut_create_thread_state(); |
| if (!thread) { |
| acpi_ds_delete_walk_state(walk_state); |
| return_ACPI_STATUS(AE_NO_MEMORY); |
| } |
| |
| walk_state->thread = thread; |
| |
| /* |
| * If executing a method, the starting sync_level is this method's |
| * sync_level |
| */ |
| if (walk_state->method_desc) { |
| walk_state->thread->current_sync_level = |
| walk_state->method_desc->method.sync_level; |
| } |
| |
| acpi_ds_push_walk_state(walk_state, thread); |
| |
| /* |
| * This global allows the AML debugger to get a handle to the currently |
| * executing control method. |
| */ |
| acpi_gbl_current_walk_list = thread; |
| |
| /* |
| * Execute the walk loop as long as there is a valid Walk State. This |
| * handles nested control method invocations without recursion. |
| */ |
| ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state)); |
| |
| status = AE_OK; |
| while (walk_state) { |
| if (ACPI_SUCCESS(status)) { |
| /* |
| * The parse_loop executes AML until the method terminates |
| * or calls another method. |
| */ |
| status = acpi_ps_parse_loop(walk_state); |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_PARSE, |
| "Completed one call to walk loop, %s State=%p\n", |
| acpi_format_exception(status), walk_state)); |
| |
| if (status == AE_CTRL_TRANSFER) { |
| /* |
| * A method call was detected. |
| * Transfer control to the called control method |
| */ |
| status = |
| acpi_ds_call_control_method(thread, walk_state, |
| NULL); |
| if (ACPI_FAILURE(status)) { |
| status = |
| acpi_ds_method_error(status, walk_state); |
| } |
| |
| /* |
| * If the transfer to the new method method call worked, a new walk |
| * state was created -- get it |
| */ |
| walk_state = acpi_ds_get_current_walk_state(thread); |
| continue; |
| } else if (status == AE_CTRL_TERMINATE) { |
| status = AE_OK; |
| } else if ((status != AE_OK) && (walk_state->method_desc)) { |
| |
| /* Either the method parse or actual execution failed */ |
| |
| ACPI_ERROR_METHOD("Method parse/execution failed", |
| walk_state->method_node, NULL, |
| status); |
| |
| /* Check for possible multi-thread reentrancy problem */ |
| |
| if ((status == AE_ALREADY_EXISTS) && |
| (!walk_state->method_desc->method.mutex)) { |
| ACPI_INFO((AE_INFO, |
| "Marking method %4.4s as Serialized", |
| walk_state->method_node->name. |
| ascii)); |
| |
| /* |
| * Method tried to create an object twice. The probable cause is |
| * that the method cannot handle reentrancy. |
| * |
| * The method is marked not_serialized, but it tried to create |
| * a named object, causing the second thread entrance to fail. |
| * Workaround this problem by marking the method permanently |
| * as Serialized. |
| */ |
| walk_state->method_desc->method.method_flags |= |
| AML_METHOD_SERIALIZED; |
| walk_state->method_desc->method.sync_level = 0; |
| } |
| } |
| |
| /* We are done with this walk, move on to the parent if any */ |
| |
| walk_state = acpi_ds_pop_walk_state(thread); |
| |
| /* Reset the current scope to the beginning of scope stack */ |
| |
| acpi_ds_scope_stack_clear(walk_state); |
| |
| /* |
| * If we just returned from the execution of a control method or if we |
| * encountered an error during the method parse phase, there's lots of |
| * cleanup to do |
| */ |
| if (((walk_state->parse_flags & ACPI_PARSE_MODE_MASK) == |
| ACPI_PARSE_EXECUTE) || (ACPI_FAILURE(status))) { |
| acpi_ds_terminate_control_method(walk_state-> |
| method_desc, |
| walk_state); |
| } |
| |
| /* Delete this walk state and all linked control states */ |
| |
| acpi_ps_cleanup_scope(&walk_state->parser_state); |
| previous_walk_state = walk_state; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_PARSE, |
| "ReturnValue=%p, ImplicitValue=%p State=%p\n", |
| walk_state->return_desc, |
| walk_state->implicit_return_obj, walk_state)); |
| |
| /* Check if we have restarted a preempted walk */ |
| |
| walk_state = acpi_ds_get_current_walk_state(thread); |
| if (walk_state) { |
| if (ACPI_SUCCESS(status)) { |
| /* |
| * There is another walk state, restart it. |
| * If the method return value is not used by the parent, |
| * The object is deleted |
| */ |
| if (!previous_walk_state->return_desc) { |
| status = |
| acpi_ds_restart_control_method |
| (walk_state, |
| previous_walk_state-> |
| implicit_return_obj); |
| } else { |
| /* |
| * We have a valid return value, delete any implicit |
| * return value. |
| */ |
| acpi_ds_clear_implicit_return |
| (previous_walk_state); |
| |
| status = |
| acpi_ds_restart_control_method |
| (walk_state, |
| previous_walk_state->return_desc); |
| } |
| if (ACPI_SUCCESS(status)) { |
| walk_state->walk_type |= |
| ACPI_WALK_METHOD_RESTART; |
| } |
| } else { |
| /* On error, delete any return object */ |
| |
| acpi_ut_remove_reference(previous_walk_state-> |
| return_desc); |
| } |
| } |
| |
| /* |
| * Just completed a 1st-level method, save the final internal return |
| * value (if any) |
| */ |
| else if (previous_walk_state->caller_return_desc) { |
| if (previous_walk_state->implicit_return_obj) { |
| *(previous_walk_state->caller_return_desc) = |
| previous_walk_state->implicit_return_obj; |
| } else { |
| /* NULL if no return value */ |
| |
| *(previous_walk_state->caller_return_desc) = |
| previous_walk_state->return_desc; |
| } |
| } else { |
| if (previous_walk_state->return_desc) { |
| |
| /* Caller doesn't want it, must delete it */ |
| |
| acpi_ut_remove_reference(previous_walk_state-> |
| return_desc); |
| } |
| if (previous_walk_state->implicit_return_obj) { |
| |
| /* Caller doesn't want it, must delete it */ |
| |
| acpi_ut_remove_reference(previous_walk_state-> |
| implicit_return_obj); |
| } |
| } |
| |
| acpi_ds_delete_walk_state(previous_walk_state); |
| } |
| |
| /* Normal exit */ |
| |
| acpi_ex_release_all_mutexes(thread); |
| acpi_ut_delete_generic_state(ACPI_CAST_PTR |
| (union acpi_generic_state, thread)); |
| acpi_gbl_current_walk_list = prev_walk_list; |
| return_ACPI_STATUS(status); |
| } |