| /* |
| * Authors: Bjorn Wesen (bjornw@axis.com) |
| * Hans-Peter Nilsson (hp@axis.com) |
| * |
| * $Log: uaccess.h,v $ |
| * Revision 1.8 2001/10/29 13:01:48 bjornw |
| * Removed unused variable tmp2 in strnlen_user |
| * |
| * Revision 1.7 2001/10/02 12:44:52 hp |
| * Add support for 64-bit put_user/get_user |
| * |
| * Revision 1.6 2001/10/01 14:51:17 bjornw |
| * Added register prefixes and removed underscores |
| * |
| * Revision 1.5 2000/10/25 03:33:21 hp |
| * - Provide implementation for everything else but get_user and put_user; |
| * copying inline to/from user for constant length 0..16, 20, 24, and |
| * clearing for 0..4, 8, 12, 16, 20, 24, strncpy_from_user and strnlen_user |
| * always inline. |
| * - Constraints for destination addr in get_user cannot be memory, only reg. |
| * - Correct labels for PC at expected fault points. |
| * - Nits with assembly code. |
| * - Don't use statement expressions without value; use "do {} while (0)". |
| * - Return correct values from __generic_... functions. |
| * |
| * Revision 1.4 2000/09/12 16:28:25 bjornw |
| * * Removed comments from the get/put user asm code |
| * * Constrains for destination addr in put_user cannot be memory, only reg |
| * |
| * Revision 1.3 2000/09/12 14:30:20 bjornw |
| * MAX_ADDR_USER does not exist anymore |
| * |
| * Revision 1.2 2000/07/13 15:52:48 bjornw |
| * New user-access functions |
| * |
| * Revision 1.1.1.1 2000/07/10 16:32:31 bjornw |
| * CRIS architecture, working draft |
| * |
| * |
| * |
| */ |
| |
| /* Asm:s have been tweaked (within the domain of correctness) to give |
| satisfactory results for "gcc version 2.96 20000427 (experimental)". |
| |
| Check regularly... |
| |
| Register $r9 is chosen for temporaries, being a call-clobbered register |
| first in line to be used (notably for local blocks), not colliding with |
| parameter registers. */ |
| |
| #ifndef _CRIS_UACCESS_H |
| #define _CRIS_UACCESS_H |
| |
| #ifndef __ASSEMBLY__ |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <asm/processor.h> |
| #include <asm/page.h> |
| |
| #define VERIFY_READ 0 |
| #define VERIFY_WRITE 1 |
| |
| /* |
| * The fs value determines whether argument validity checking should be |
| * performed or not. If get_fs() == USER_DS, checking is performed, with |
| * get_fs() == KERNEL_DS, checking is bypassed. |
| * |
| * For historical reasons, these macros are grossly misnamed. |
| */ |
| |
| #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) |
| |
| /* addr_limit is the maximum accessible address for the task. we misuse |
| * the KERNEL_DS and USER_DS values to both assign and compare the |
| * addr_limit values through the equally misnamed get/set_fs macros. |
| * (see above) |
| */ |
| |
| #define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) |
| #define USER_DS MAKE_MM_SEG(TASK_SIZE) |
| |
| #define get_ds() (KERNEL_DS) |
| #define get_fs() (current_thread_info()->addr_limit) |
| #define set_fs(x) (current_thread_info()->addr_limit = (x)) |
| |
| #define segment_eq(a,b) ((a).seg == (b).seg) |
| |
| #define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) |
| #define __user_ok(addr,size) (((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size))) |
| #define __access_ok(addr,size) (__kernel_ok || __user_ok((addr),(size))) |
| #define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size)) |
| |
| /* this function will go away soon - use access_ok() instead */ |
| extern inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size) |
| { |
| return access_ok(type,addr,size) ? 0 : -EFAULT; |
| } |
| |
| |
| #include <asm/arch/uaccess.h> |
| |
| /* |
| * The exception table consists of pairs of addresses: the first is the |
| * address of an instruction that is allowed to fault, and the second is |
| * the address at which the program should continue. No registers are |
| * modified, so it is entirely up to the continuation code to figure out |
| * what to do. |
| * |
| * All the routines below use bits of fixup code that are out of line |
| * with the main instruction path. This means when everything is well, |
| * we don't even have to jump over them. Further, they do not intrude |
| * on our cache or tlb entries. |
| */ |
| |
| struct exception_table_entry |
| { |
| unsigned long insn, fixup; |
| }; |
| |
| /* |
| * These are the main single-value transfer routines. They automatically |
| * use the right size if we just have the right pointer type. |
| * |
| * This gets kind of ugly. We want to return _two_ values in "get_user()" |
| * and yet we don't want to do any pointers, because that is too much |
| * of a performance impact. Thus we have a few rather ugly macros here, |
| * and hide all the ugliness from the user. |
| * |
| * The "__xxx" versions of the user access functions are versions that |
| * do not verify the address space, that must have been done previously |
| * with a separate "access_ok()" call (this is used when we do multiple |
| * accesses to the same area of user memory). |
| * |
| * As we use the same address space for kernel and user data on |
| * CRIS, we can just do these as direct assignments. (Of course, the |
| * exception handling means that it's no longer "just"...) |
| */ |
| #define get_user(x,ptr) \ |
| __get_user_check((x),(ptr),sizeof(*(ptr))) |
| #define put_user(x,ptr) \ |
| __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) |
| |
| #define __get_user(x,ptr) \ |
| __get_user_nocheck((x),(ptr),sizeof(*(ptr))) |
| #define __put_user(x,ptr) \ |
| __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) |
| |
| extern long __put_user_bad(void); |
| |
| #define __put_user_size(x,ptr,size,retval) \ |
| do { \ |
| retval = 0; \ |
| switch (size) { \ |
| case 1: __put_user_asm(x,ptr,retval,"move.b"); break; \ |
| case 2: __put_user_asm(x,ptr,retval,"move.w"); break; \ |
| case 4: __put_user_asm(x,ptr,retval,"move.d"); break; \ |
| case 8: __put_user_asm_64(x,ptr,retval); break; \ |
| default: __put_user_bad(); \ |
| } \ |
| } while (0) |
| |
| #define __get_user_size(x,ptr,size,retval) \ |
| do { \ |
| retval = 0; \ |
| switch (size) { \ |
| case 1: __get_user_asm(x,ptr,retval,"move.b"); break; \ |
| case 2: __get_user_asm(x,ptr,retval,"move.w"); break; \ |
| case 4: __get_user_asm(x,ptr,retval,"move.d"); break; \ |
| case 8: __get_user_asm_64(x,ptr,retval); break; \ |
| default: (x) = __get_user_bad(); \ |
| } \ |
| } while (0) |
| |
| #define __put_user_nocheck(x,ptr,size) \ |
| ({ \ |
| long __pu_err; \ |
| __put_user_size((x),(ptr),(size),__pu_err); \ |
| __pu_err; \ |
| }) |
| |
| #define __put_user_check(x,ptr,size) \ |
| ({ \ |
| long __pu_err = -EFAULT; \ |
| __typeof__(*(ptr)) *__pu_addr = (ptr); \ |
| if (access_ok(VERIFY_WRITE,__pu_addr,size)) \ |
| __put_user_size((x),__pu_addr,(size),__pu_err); \ |
| __pu_err; \ |
| }) |
| |
| struct __large_struct { unsigned long buf[100]; }; |
| #define __m(x) (*(struct __large_struct *)(x)) |
| |
| |
| |
| #define __get_user_nocheck(x,ptr,size) \ |
| ({ \ |
| long __gu_err, __gu_val; \ |
| __get_user_size(__gu_val,(ptr),(size),__gu_err); \ |
| (x) = (__typeof__(*(ptr)))__gu_val; \ |
| __gu_err; \ |
| }) |
| |
| #define __get_user_check(x,ptr,size) \ |
| ({ \ |
| long __gu_err = -EFAULT, __gu_val = 0; \ |
| const __typeof__(*(ptr)) *__gu_addr = (ptr); \ |
| if (access_ok(VERIFY_READ,__gu_addr,size)) \ |
| __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \ |
| (x) = (__typeof__(*(ptr)))__gu_val; \ |
| __gu_err; \ |
| }) |
| |
| extern long __get_user_bad(void); |
| |
| /* More complex functions. Most are inline, but some call functions that |
| live in lib/usercopy.c */ |
| |
| extern unsigned long __copy_user(void *to, const void *from, unsigned long n); |
| extern unsigned long __copy_user_zeroing(void *to, const void *from, unsigned long n); |
| extern unsigned long __do_clear_user(void *to, unsigned long n); |
| |
| extern inline unsigned long |
| __generic_copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| if (access_ok(VERIFY_WRITE, to, n)) |
| return __copy_user(to,from,n); |
| return n; |
| } |
| |
| extern inline unsigned long |
| __generic_copy_from_user(void *to, const void __user *from, unsigned long n) |
| { |
| if (access_ok(VERIFY_READ, from, n)) |
| return __copy_user_zeroing(to,from,n); |
| return n; |
| } |
| |
| extern inline unsigned long |
| __generic_clear_user(void __user *to, unsigned long n) |
| { |
| if (access_ok(VERIFY_WRITE, to, n)) |
| return __do_clear_user(to,n); |
| return n; |
| } |
| |
| extern inline long |
| __strncpy_from_user(char *dst, const char __user *src, long count) |
| { |
| return __do_strncpy_from_user(dst, src, count); |
| } |
| |
| extern inline long |
| strncpy_from_user(char *dst, const char __user *src, long count) |
| { |
| long res = -EFAULT; |
| if (access_ok(VERIFY_READ, src, 1)) |
| res = __do_strncpy_from_user(dst, src, count); |
| return res; |
| } |
| |
| |
| /* Note that if these expand awfully if made into switch constructs, so |
| don't do that. */ |
| |
| extern inline unsigned long |
| __constant_copy_from_user(void *to, const void __user *from, unsigned long n) |
| { |
| unsigned long ret = 0; |
| if (n == 0) |
| ; |
| else if (n == 1) |
| __asm_copy_from_user_1(to, from, ret); |
| else if (n == 2) |
| __asm_copy_from_user_2(to, from, ret); |
| else if (n == 3) |
| __asm_copy_from_user_3(to, from, ret); |
| else if (n == 4) |
| __asm_copy_from_user_4(to, from, ret); |
| else if (n == 5) |
| __asm_copy_from_user_5(to, from, ret); |
| else if (n == 6) |
| __asm_copy_from_user_6(to, from, ret); |
| else if (n == 7) |
| __asm_copy_from_user_7(to, from, ret); |
| else if (n == 8) |
| __asm_copy_from_user_8(to, from, ret); |
| else if (n == 9) |
| __asm_copy_from_user_9(to, from, ret); |
| else if (n == 10) |
| __asm_copy_from_user_10(to, from, ret); |
| else if (n == 11) |
| __asm_copy_from_user_11(to, from, ret); |
| else if (n == 12) |
| __asm_copy_from_user_12(to, from, ret); |
| else if (n == 13) |
| __asm_copy_from_user_13(to, from, ret); |
| else if (n == 14) |
| __asm_copy_from_user_14(to, from, ret); |
| else if (n == 15) |
| __asm_copy_from_user_15(to, from, ret); |
| else if (n == 16) |
| __asm_copy_from_user_16(to, from, ret); |
| else if (n == 20) |
| __asm_copy_from_user_20(to, from, ret); |
| else if (n == 24) |
| __asm_copy_from_user_24(to, from, ret); |
| else |
| ret = __generic_copy_from_user(to, from, n); |
| |
| return ret; |
| } |
| |
| /* Ditto, don't make a switch out of this. */ |
| |
| extern inline unsigned long |
| __constant_copy_to_user(void __user *to, const void *from, unsigned long n) |
| { |
| unsigned long ret = 0; |
| if (n == 0) |
| ; |
| else if (n == 1) |
| __asm_copy_to_user_1(to, from, ret); |
| else if (n == 2) |
| __asm_copy_to_user_2(to, from, ret); |
| else if (n == 3) |
| __asm_copy_to_user_3(to, from, ret); |
| else if (n == 4) |
| __asm_copy_to_user_4(to, from, ret); |
| else if (n == 5) |
| __asm_copy_to_user_5(to, from, ret); |
| else if (n == 6) |
| __asm_copy_to_user_6(to, from, ret); |
| else if (n == 7) |
| __asm_copy_to_user_7(to, from, ret); |
| else if (n == 8) |
| __asm_copy_to_user_8(to, from, ret); |
| else if (n == 9) |
| __asm_copy_to_user_9(to, from, ret); |
| else if (n == 10) |
| __asm_copy_to_user_10(to, from, ret); |
| else if (n == 11) |
| __asm_copy_to_user_11(to, from, ret); |
| else if (n == 12) |
| __asm_copy_to_user_12(to, from, ret); |
| else if (n == 13) |
| __asm_copy_to_user_13(to, from, ret); |
| else if (n == 14) |
| __asm_copy_to_user_14(to, from, ret); |
| else if (n == 15) |
| __asm_copy_to_user_15(to, from, ret); |
| else if (n == 16) |
| __asm_copy_to_user_16(to, from, ret); |
| else if (n == 20) |
| __asm_copy_to_user_20(to, from, ret); |
| else if (n == 24) |
| __asm_copy_to_user_24(to, from, ret); |
| else |
| ret = __generic_copy_to_user(to, from, n); |
| |
| return ret; |
| } |
| |
| /* No switch, please. */ |
| |
| extern inline unsigned long |
| __constant_clear_user(void __user *to, unsigned long n) |
| { |
| unsigned long ret = 0; |
| if (n == 0) |
| ; |
| else if (n == 1) |
| __asm_clear_1(to, ret); |
| else if (n == 2) |
| __asm_clear_2(to, ret); |
| else if (n == 3) |
| __asm_clear_3(to, ret); |
| else if (n == 4) |
| __asm_clear_4(to, ret); |
| else if (n == 8) |
| __asm_clear_8(to, ret); |
| else if (n == 12) |
| __asm_clear_12(to, ret); |
| else if (n == 16) |
| __asm_clear_16(to, ret); |
| else if (n == 20) |
| __asm_clear_20(to, ret); |
| else if (n == 24) |
| __asm_clear_24(to, ret); |
| else |
| ret = __generic_clear_user(to, n); |
| |
| return ret; |
| } |
| |
| |
| #define clear_user(to, n) \ |
| (__builtin_constant_p(n) ? \ |
| __constant_clear_user(to, n) : \ |
| __generic_clear_user(to, n)) |
| |
| #define copy_from_user(to, from, n) \ |
| (__builtin_constant_p(n) ? \ |
| __constant_copy_from_user(to, from, n) : \ |
| __generic_copy_from_user(to, from, n)) |
| |
| #define copy_to_user(to, from, n) \ |
| (__builtin_constant_p(n) ? \ |
| __constant_copy_to_user(to, from, n) : \ |
| __generic_copy_to_user(to, from, n)) |
| |
| /* We let the __ versions of copy_from/to_user inline, because they're often |
| * used in fast paths and have only a small space overhead. |
| */ |
| |
| extern inline unsigned long |
| __generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n) |
| { |
| return __copy_user_zeroing(to,from,n); |
| } |
| |
| extern inline unsigned long |
| __generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n) |
| { |
| return __copy_user(to,from,n); |
| } |
| |
| extern inline unsigned long |
| __generic_clear_user_nocheck(void *to, unsigned long n) |
| { |
| return __do_clear_user(to,n); |
| } |
| |
| /* without checking */ |
| |
| #define __copy_to_user(to,from,n) __generic_copy_to_user_nocheck((to),(from),(n)) |
| #define __copy_from_user(to,from,n) __generic_copy_from_user_nocheck((to),(from),(n)) |
| #define __copy_to_user_inatomic __copy_to_user |
| #define __copy_from_user_inatomic __copy_from_user |
| #define __clear_user(to,n) __generic_clear_user_nocheck((to),(n)) |
| |
| #define strlen_user(str) strnlen_user((str), 0x7ffffffe) |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* _CRIS_UACCESS_H */ |