| /* |
| * linux/kernel/irq/manage.c |
| * |
| * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar |
| * Copyright (C) 2005-2006 Thomas Gleixner |
| * |
| * This file contains driver APIs to the irq subsystem. |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/kthread.h> |
| #include <linux/module.h> |
| #include <linux/random.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| |
| #include "internals.h" |
| |
| #ifdef CONFIG_IRQ_FORCED_THREADING |
| __read_mostly bool force_irqthreads; |
| |
| static int __init setup_forced_irqthreads(char *arg) |
| { |
| force_irqthreads = true; |
| return 0; |
| } |
| early_param("threadirqs", setup_forced_irqthreads); |
| #endif |
| |
| /** |
| * synchronize_irq - wait for pending IRQ handlers (on other CPUs) |
| * @irq: interrupt number to wait for |
| * |
| * This function waits for any pending IRQ handlers for this interrupt |
| * to complete before returning. If you use this function while |
| * holding a resource the IRQ handler may need you will deadlock. |
| * |
| * This function may be called - with care - from IRQ context. |
| */ |
| void synchronize_irq(unsigned int irq) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| bool inprogress; |
| |
| if (!desc) |
| return; |
| |
| do { |
| unsigned long flags; |
| |
| /* |
| * Wait until we're out of the critical section. This might |
| * give the wrong answer due to the lack of memory barriers. |
| */ |
| while (irqd_irq_inprogress(&desc->irq_data)) |
| cpu_relax(); |
| |
| /* Ok, that indicated we're done: double-check carefully. */ |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| inprogress = irqd_irq_inprogress(&desc->irq_data); |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| |
| /* Oops, that failed? */ |
| } while (inprogress); |
| |
| /* |
| * We made sure that no hardirq handler is running. Now verify |
| * that no threaded handlers are active. |
| */ |
| wait_event(desc->wait_for_threads, !atomic_read(&desc->threads_active)); |
| } |
| EXPORT_SYMBOL(synchronize_irq); |
| |
| #ifdef CONFIG_SMP |
| cpumask_var_t irq_default_affinity; |
| |
| /** |
| * irq_can_set_affinity - Check if the affinity of a given irq can be set |
| * @irq: Interrupt to check |
| * |
| */ |
| int irq_can_set_affinity(unsigned int irq) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| if (!desc || !irqd_can_balance(&desc->irq_data) || |
| !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity) |
| return 0; |
| |
| return 1; |
| } |
| |
| /** |
| * irq_set_thread_affinity - Notify irq threads to adjust affinity |
| * @desc: irq descriptor which has affitnity changed |
| * |
| * We just set IRQTF_AFFINITY and delegate the affinity setting |
| * to the interrupt thread itself. We can not call |
| * set_cpus_allowed_ptr() here as we hold desc->lock and this |
| * code can be called from hard interrupt context. |
| */ |
| void irq_set_thread_affinity(struct irq_desc *desc) |
| { |
| struct irqaction *action = desc->action; |
| |
| while (action) { |
| if (action->thread) |
| set_bit(IRQTF_AFFINITY, &action->thread_flags); |
| action = action->next; |
| } |
| } |
| |
| #ifdef CONFIG_GENERIC_PENDING_IRQ |
| static inline bool irq_can_move_pcntxt(struct irq_data *data) |
| { |
| return irqd_can_move_in_process_context(data); |
| } |
| static inline bool irq_move_pending(struct irq_data *data) |
| { |
| return irqd_is_setaffinity_pending(data); |
| } |
| static inline void |
| irq_copy_pending(struct irq_desc *desc, const struct cpumask *mask) |
| { |
| cpumask_copy(desc->pending_mask, mask); |
| } |
| static inline void |
| irq_get_pending(struct cpumask *mask, struct irq_desc *desc) |
| { |
| cpumask_copy(mask, desc->pending_mask); |
| } |
| #else |
| static inline bool irq_can_move_pcntxt(struct irq_data *data) { return true; } |
| static inline bool irq_move_pending(struct irq_data *data) { return false; } |
| static inline void |
| irq_copy_pending(struct irq_desc *desc, const struct cpumask *mask) { } |
| static inline void |
| irq_get_pending(struct cpumask *mask, struct irq_desc *desc) { } |
| #endif |
| |
| int __irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask) |
| { |
| struct irq_chip *chip = irq_data_get_irq_chip(data); |
| struct irq_desc *desc = irq_data_to_desc(data); |
| int ret = 0; |
| |
| if (!chip || !chip->irq_set_affinity) |
| return -EINVAL; |
| |
| if (irq_can_move_pcntxt(data)) { |
| ret = chip->irq_set_affinity(data, mask, false); |
| switch (ret) { |
| case IRQ_SET_MASK_OK: |
| cpumask_copy(data->affinity, mask); |
| case IRQ_SET_MASK_OK_NOCOPY: |
| irq_set_thread_affinity(desc); |
| ret = 0; |
| } |
| } else { |
| irqd_set_move_pending(data); |
| irq_copy_pending(desc, mask); |
| } |
| |
| if (desc->affinity_notify) { |
| kref_get(&desc->affinity_notify->kref); |
| schedule_work(&desc->affinity_notify->work); |
| } |
| irqd_set(data, IRQD_AFFINITY_SET); |
| |
| return ret; |
| } |
| |
| /** |
| * irq_set_affinity - Set the irq affinity of a given irq |
| * @irq: Interrupt to set affinity |
| * @mask: cpumask |
| * |
| */ |
| int irq_set_affinity(unsigned int irq, const struct cpumask *mask) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| unsigned long flags; |
| int ret; |
| |
| if (!desc) |
| return -EINVAL; |
| |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| ret = __irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask); |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| return ret; |
| } |
| |
| int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m) |
| { |
| unsigned long flags; |
| struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL); |
| |
| if (!desc) |
| return -EINVAL; |
| desc->affinity_hint = m; |
| irq_put_desc_unlock(desc, flags); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(irq_set_affinity_hint); |
| |
| static void irq_affinity_notify(struct work_struct *work) |
| { |
| struct irq_affinity_notify *notify = |
| container_of(work, struct irq_affinity_notify, work); |
| struct irq_desc *desc = irq_to_desc(notify->irq); |
| cpumask_var_t cpumask; |
| unsigned long flags; |
| |
| if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL)) |
| goto out; |
| |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| if (irq_move_pending(&desc->irq_data)) |
| irq_get_pending(cpumask, desc); |
| else |
| cpumask_copy(cpumask, desc->irq_data.affinity); |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| |
| notify->notify(notify, cpumask); |
| |
| free_cpumask_var(cpumask); |
| out: |
| kref_put(¬ify->kref, notify->release); |
| } |
| |
| /** |
| * irq_set_affinity_notifier - control notification of IRQ affinity changes |
| * @irq: Interrupt for which to enable/disable notification |
| * @notify: Context for notification, or %NULL to disable |
| * notification. Function pointers must be initialised; |
| * the other fields will be initialised by this function. |
| * |
| * Must be called in process context. Notification may only be enabled |
| * after the IRQ is allocated and must be disabled before the IRQ is |
| * freed using free_irq(). |
| */ |
| int |
| irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| struct irq_affinity_notify *old_notify; |
| unsigned long flags; |
| |
| /* The release function is promised process context */ |
| might_sleep(); |
| |
| if (!desc) |
| return -EINVAL; |
| |
| /* Complete initialisation of *notify */ |
| if (notify) { |
| notify->irq = irq; |
| kref_init(¬ify->kref); |
| INIT_WORK(¬ify->work, irq_affinity_notify); |
| } |
| |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| old_notify = desc->affinity_notify; |
| desc->affinity_notify = notify; |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| |
| if (old_notify) |
| kref_put(&old_notify->kref, old_notify->release); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(irq_set_affinity_notifier); |
| |
| #ifndef CONFIG_AUTO_IRQ_AFFINITY |
| /* |
| * Generic version of the affinity autoselector. |
| */ |
| static int |
| setup_affinity(unsigned int irq, struct irq_desc *desc, struct cpumask *mask) |
| { |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| struct cpumask *set = irq_default_affinity; |
| int ret; |
| |
| /* Excludes PER_CPU and NO_BALANCE interrupts */ |
| if (!irq_can_set_affinity(irq)) |
| return 0; |
| |
| /* |
| * Preserve an userspace affinity setup, but make sure that |
| * one of the targets is online. |
| */ |
| if (irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) { |
| if (cpumask_intersects(desc->irq_data.affinity, |
| cpu_online_mask)) |
| set = desc->irq_data.affinity; |
| else |
| irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET); |
| } |
| |
| cpumask_and(mask, cpu_online_mask, set); |
| ret = chip->irq_set_affinity(&desc->irq_data, mask, false); |
| switch (ret) { |
| case IRQ_SET_MASK_OK: |
| cpumask_copy(desc->irq_data.affinity, mask); |
| case IRQ_SET_MASK_OK_NOCOPY: |
| irq_set_thread_affinity(desc); |
| } |
| return 0; |
| } |
| #else |
| static inline int |
| setup_affinity(unsigned int irq, struct irq_desc *d, struct cpumask *mask) |
| { |
| return irq_select_affinity(irq); |
| } |
| #endif |
| |
| /* |
| * Called when affinity is set via /proc/irq |
| */ |
| int irq_select_affinity_usr(unsigned int irq, struct cpumask *mask) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| unsigned long flags; |
| int ret; |
| |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| ret = setup_affinity(irq, desc, mask); |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| return ret; |
| } |
| |
| #else |
| static inline int |
| setup_affinity(unsigned int irq, struct irq_desc *desc, struct cpumask *mask) |
| { |
| return 0; |
| } |
| #endif |
| |
| void __disable_irq(struct irq_desc *desc, unsigned int irq, bool suspend) |
| { |
| if (suspend) { |
| if (!desc->action || (desc->action->flags & IRQF_NO_SUSPEND)) |
| return; |
| desc->istate |= IRQS_SUSPENDED; |
| } |
| |
| if (!desc->depth++) |
| irq_disable(desc); |
| } |
| |
| static int __disable_irq_nosync(unsigned int irq) |
| { |
| unsigned long flags; |
| struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL); |
| |
| if (!desc) |
| return -EINVAL; |
| __disable_irq(desc, irq, false); |
| irq_put_desc_busunlock(desc, flags); |
| return 0; |
| } |
| |
| /** |
| * disable_irq_nosync - disable an irq without waiting |
| * @irq: Interrupt to disable |
| * |
| * Disable the selected interrupt line. Disables and Enables are |
| * nested. |
| * Unlike disable_irq(), this function does not ensure existing |
| * instances of the IRQ handler have completed before returning. |
| * |
| * This function may be called from IRQ context. |
| */ |
| void disable_irq_nosync(unsigned int irq) |
| { |
| __disable_irq_nosync(irq); |
| } |
| EXPORT_SYMBOL(disable_irq_nosync); |
| |
| /** |
| * disable_irq - disable an irq and wait for completion |
| * @irq: Interrupt to disable |
| * |
| * Disable the selected interrupt line. Enables and Disables are |
| * nested. |
| * This function waits for any pending IRQ handlers for this interrupt |
| * to complete before returning. If you use this function while |
| * holding a resource the IRQ handler may need you will deadlock. |
| * |
| * This function may be called - with care - from IRQ context. |
| */ |
| void disable_irq(unsigned int irq) |
| { |
| if (!__disable_irq_nosync(irq)) |
| synchronize_irq(irq); |
| } |
| EXPORT_SYMBOL(disable_irq); |
| |
| void __enable_irq(struct irq_desc *desc, unsigned int irq, bool resume) |
| { |
| if (resume) { |
| if (!(desc->istate & IRQS_SUSPENDED)) { |
| if (!desc->action) |
| return; |
| if (!(desc->action->flags & IRQF_FORCE_RESUME)) |
| return; |
| /* Pretend that it got disabled ! */ |
| desc->depth++; |
| } |
| desc->istate &= ~IRQS_SUSPENDED; |
| } |
| |
| switch (desc->depth) { |
| case 0: |
| err_out: |
| WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n", irq); |
| break; |
| case 1: { |
| if (desc->istate & IRQS_SUSPENDED) |
| goto err_out; |
| /* Prevent probing on this irq: */ |
| irq_settings_set_noprobe(desc); |
| irq_enable(desc); |
| check_irq_resend(desc, irq); |
| /* fall-through */ |
| } |
| default: |
| desc->depth--; |
| } |
| } |
| |
| /** |
| * enable_irq - enable handling of an irq |
| * @irq: Interrupt to enable |
| * |
| * Undoes the effect of one call to disable_irq(). If this |
| * matches the last disable, processing of interrupts on this |
| * IRQ line is re-enabled. |
| * |
| * This function may be called from IRQ context only when |
| * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL ! |
| */ |
| void enable_irq(unsigned int irq) |
| { |
| unsigned long flags; |
| struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL); |
| |
| if (!desc) |
| return; |
| if (WARN(!desc->irq_data.chip, |
| KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq)) |
| goto out; |
| |
| __enable_irq(desc, irq, false); |
| out: |
| irq_put_desc_busunlock(desc, flags); |
| } |
| EXPORT_SYMBOL(enable_irq); |
| |
| static int set_irq_wake_real(unsigned int irq, unsigned int on) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| int ret = -ENXIO; |
| |
| if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE) |
| return 0; |
| |
| if (desc->irq_data.chip->irq_set_wake) |
| ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on); |
| |
| return ret; |
| } |
| |
| /** |
| * irq_set_irq_wake - control irq power management wakeup |
| * @irq: interrupt to control |
| * @on: enable/disable power management wakeup |
| * |
| * Enable/disable power management wakeup mode, which is |
| * disabled by default. Enables and disables must match, |
| * just as they match for non-wakeup mode support. |
| * |
| * Wakeup mode lets this IRQ wake the system from sleep |
| * states like "suspend to RAM". |
| */ |
| int irq_set_irq_wake(unsigned int irq, unsigned int on) |
| { |
| unsigned long flags; |
| struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL); |
| int ret = 0; |
| |
| if (!desc) |
| return -EINVAL; |
| |
| /* wakeup-capable irqs can be shared between drivers that |
| * don't need to have the same sleep mode behaviors. |
| */ |
| if (on) { |
| if (desc->wake_depth++ == 0) { |
| ret = set_irq_wake_real(irq, on); |
| if (ret) |
| desc->wake_depth = 0; |
| else |
| irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE); |
| } |
| } else { |
| if (desc->wake_depth == 0) { |
| WARN(1, "Unbalanced IRQ %d wake disable\n", irq); |
| } else if (--desc->wake_depth == 0) { |
| ret = set_irq_wake_real(irq, on); |
| if (ret) |
| desc->wake_depth = 1; |
| else |
| irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE); |
| } |
| } |
| irq_put_desc_busunlock(desc, flags); |
| return ret; |
| } |
| EXPORT_SYMBOL(irq_set_irq_wake); |
| |
| /* |
| * Internal function that tells the architecture code whether a |
| * particular irq has been exclusively allocated or is available |
| * for driver use. |
| */ |
| int can_request_irq(unsigned int irq, unsigned long irqflags) |
| { |
| unsigned long flags; |
| struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0); |
| int canrequest = 0; |
| |
| if (!desc) |
| return 0; |
| |
| if (irq_settings_can_request(desc)) { |
| if (desc->action) |
| if (irqflags & desc->action->flags & IRQF_SHARED) |
| canrequest =1; |
| } |
| irq_put_desc_unlock(desc, flags); |
| return canrequest; |
| } |
| |
| int __irq_set_trigger(struct irq_desc *desc, unsigned int irq, |
| unsigned long flags) |
| { |
| struct irq_chip *chip = desc->irq_data.chip; |
| int ret, unmask = 0; |
| |
| if (!chip || !chip->irq_set_type) { |
| /* |
| * IRQF_TRIGGER_* but the PIC does not support multiple |
| * flow-types? |
| */ |
| pr_debug("No set_type function for IRQ %d (%s)\n", irq, |
| chip ? (chip->name ? : "unknown") : "unknown"); |
| return 0; |
| } |
| |
| flags &= IRQ_TYPE_SENSE_MASK; |
| |
| if (chip->flags & IRQCHIP_SET_TYPE_MASKED) { |
| if (!irqd_irq_masked(&desc->irq_data)) |
| mask_irq(desc); |
| if (!irqd_irq_disabled(&desc->irq_data)) |
| unmask = 1; |
| } |
| |
| /* caller masked out all except trigger mode flags */ |
| ret = chip->irq_set_type(&desc->irq_data, flags); |
| |
| switch (ret) { |
| case IRQ_SET_MASK_OK: |
| irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK); |
| irqd_set(&desc->irq_data, flags); |
| |
| case IRQ_SET_MASK_OK_NOCOPY: |
| flags = irqd_get_trigger_type(&desc->irq_data); |
| irq_settings_set_trigger_mask(desc, flags); |
| irqd_clear(&desc->irq_data, IRQD_LEVEL); |
| irq_settings_clr_level(desc); |
| if (flags & IRQ_TYPE_LEVEL_MASK) { |
| irq_settings_set_level(desc); |
| irqd_set(&desc->irq_data, IRQD_LEVEL); |
| } |
| |
| ret = 0; |
| break; |
| default: |
| pr_err("setting trigger mode %lu for irq %u failed (%pF)\n", |
| flags, irq, chip->irq_set_type); |
| } |
| if (unmask) |
| unmask_irq(desc); |
| return ret; |
| } |
| |
| /* |
| * Default primary interrupt handler for threaded interrupts. Is |
| * assigned as primary handler when request_threaded_irq is called |
| * with handler == NULL. Useful for oneshot interrupts. |
| */ |
| static irqreturn_t irq_default_primary_handler(int irq, void *dev_id) |
| { |
| return IRQ_WAKE_THREAD; |
| } |
| |
| /* |
| * Primary handler for nested threaded interrupts. Should never be |
| * called. |
| */ |
| static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id) |
| { |
| WARN(1, "Primary handler called for nested irq %d\n", irq); |
| return IRQ_NONE; |
| } |
| |
| static int irq_wait_for_interrupt(struct irqaction *action) |
| { |
| while (!kthread_should_stop()) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| if (test_and_clear_bit(IRQTF_RUNTHREAD, |
| &action->thread_flags)) { |
| __set_current_state(TASK_RUNNING); |
| return 0; |
| } |
| schedule(); |
| } |
| return -1; |
| } |
| |
| /* |
| * Oneshot interrupts keep the irq line masked until the threaded |
| * handler finished. unmask if the interrupt has not been disabled and |
| * is marked MASKED. |
| */ |
| static void irq_finalize_oneshot(struct irq_desc *desc, |
| struct irqaction *action, bool force) |
| { |
| if (!(desc->istate & IRQS_ONESHOT)) |
| return; |
| again: |
| chip_bus_lock(desc); |
| raw_spin_lock_irq(&desc->lock); |
| |
| /* |
| * Implausible though it may be we need to protect us against |
| * the following scenario: |
| * |
| * The thread is faster done than the hard interrupt handler |
| * on the other CPU. If we unmask the irq line then the |
| * interrupt can come in again and masks the line, leaves due |
| * to IRQS_INPROGRESS and the irq line is masked forever. |
| * |
| * This also serializes the state of shared oneshot handlers |
| * versus "desc->threads_onehsot |= action->thread_mask;" in |
| * irq_wake_thread(). See the comment there which explains the |
| * serialization. |
| */ |
| if (unlikely(irqd_irq_inprogress(&desc->irq_data))) { |
| raw_spin_unlock_irq(&desc->lock); |
| chip_bus_sync_unlock(desc); |
| cpu_relax(); |
| goto again; |
| } |
| |
| /* |
| * Now check again, whether the thread should run. Otherwise |
| * we would clear the threads_oneshot bit of this thread which |
| * was just set. |
| */ |
| if (!force && test_bit(IRQTF_RUNTHREAD, &action->thread_flags)) |
| goto out_unlock; |
| |
| desc->threads_oneshot &= ~action->thread_mask; |
| |
| if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) && |
| irqd_irq_masked(&desc->irq_data)) |
| unmask_irq(desc); |
| |
| out_unlock: |
| raw_spin_unlock_irq(&desc->lock); |
| chip_bus_sync_unlock(desc); |
| } |
| |
| #ifdef CONFIG_SMP |
| /* |
| * Check whether we need to chasnge the affinity of the interrupt thread. |
| */ |
| static void |
| irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) |
| { |
| cpumask_var_t mask; |
| |
| if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags)) |
| return; |
| |
| /* |
| * In case we are out of memory we set IRQTF_AFFINITY again and |
| * try again next time |
| */ |
| if (!alloc_cpumask_var(&mask, GFP_KERNEL)) { |
| set_bit(IRQTF_AFFINITY, &action->thread_flags); |
| return; |
| } |
| |
| raw_spin_lock_irq(&desc->lock); |
| cpumask_copy(mask, desc->irq_data.affinity); |
| raw_spin_unlock_irq(&desc->lock); |
| |
| set_cpus_allowed_ptr(current, mask); |
| free_cpumask_var(mask); |
| } |
| #else |
| static inline void |
| irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { } |
| #endif |
| |
| /* |
| * Interrupts which are not explicitely requested as threaded |
| * interrupts rely on the implicit bh/preempt disable of the hard irq |
| * context. So we need to disable bh here to avoid deadlocks and other |
| * side effects. |
| */ |
| static irqreturn_t |
| irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action) |
| { |
| irqreturn_t ret; |
| |
| local_bh_disable(); |
| ret = action->thread_fn(action->irq, action->dev_id); |
| irq_finalize_oneshot(desc, action, false); |
| local_bh_enable(); |
| return ret; |
| } |
| |
| /* |
| * Interrupts explicitely requested as threaded interupts want to be |
| * preemtible - many of them need to sleep and wait for slow busses to |
| * complete. |
| */ |
| static irqreturn_t irq_thread_fn(struct irq_desc *desc, |
| struct irqaction *action) |
| { |
| irqreturn_t ret; |
| |
| ret = action->thread_fn(action->irq, action->dev_id); |
| irq_finalize_oneshot(desc, action, false); |
| return ret; |
| } |
| |
| /* |
| * Interrupt handler thread |
| */ |
| static int irq_thread(void *data) |
| { |
| static const struct sched_param param = { |
| .sched_priority = MAX_USER_RT_PRIO/2, |
| }; |
| struct irqaction *action = data; |
| struct irq_desc *desc = irq_to_desc(action->irq); |
| irqreturn_t (*handler_fn)(struct irq_desc *desc, |
| struct irqaction *action); |
| int wake; |
| |
| if (force_irqthreads & test_bit(IRQTF_FORCED_THREAD, |
| &action->thread_flags)) |
| handler_fn = irq_forced_thread_fn; |
| else |
| handler_fn = irq_thread_fn; |
| |
| sched_setscheduler(current, SCHED_FIFO, ¶m); |
| current->irqaction = action; |
| |
| while (!irq_wait_for_interrupt(action)) { |
| |
| irq_thread_check_affinity(desc, action); |
| |
| atomic_inc(&desc->threads_active); |
| |
| raw_spin_lock_irq(&desc->lock); |
| if (unlikely(irqd_irq_disabled(&desc->irq_data))) { |
| /* |
| * CHECKME: We might need a dedicated |
| * IRQ_THREAD_PENDING flag here, which |
| * retriggers the thread in check_irq_resend() |
| * but AFAICT IRQS_PENDING should be fine as it |
| * retriggers the interrupt itself --- tglx |
| */ |
| desc->istate |= IRQS_PENDING; |
| raw_spin_unlock_irq(&desc->lock); |
| } else { |
| irqreturn_t action_ret; |
| |
| raw_spin_unlock_irq(&desc->lock); |
| action_ret = handler_fn(desc, action); |
| if (!noirqdebug) |
| note_interrupt(action->irq, desc, action_ret); |
| } |
| |
| wake = atomic_dec_and_test(&desc->threads_active); |
| |
| if (wake && waitqueue_active(&desc->wait_for_threads)) |
| wake_up(&desc->wait_for_threads); |
| } |
| |
| /* Prevent a stale desc->threads_oneshot */ |
| irq_finalize_oneshot(desc, action, true); |
| |
| /* |
| * Clear irqaction. Otherwise exit_irq_thread() would make |
| * fuzz about an active irq thread going into nirvana. |
| */ |
| current->irqaction = NULL; |
| return 0; |
| } |
| |
| /* |
| * Called from do_exit() |
| */ |
| void exit_irq_thread(void) |
| { |
| struct task_struct *tsk = current; |
| struct irq_desc *desc; |
| |
| if (!tsk->irqaction) |
| return; |
| |
| printk(KERN_ERR |
| "exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n", |
| tsk->comm ? tsk->comm : "", tsk->pid, tsk->irqaction->irq); |
| |
| desc = irq_to_desc(tsk->irqaction->irq); |
| |
| /* |
| * Prevent a stale desc->threads_oneshot. Must be called |
| * before setting the IRQTF_DIED flag. |
| */ |
| irq_finalize_oneshot(desc, tsk->irqaction, true); |
| |
| /* |
| * Set the THREAD DIED flag to prevent further wakeups of the |
| * soon to be gone threaded handler. |
| */ |
| set_bit(IRQTF_DIED, &tsk->irqaction->flags); |
| } |
| |
| static void irq_setup_forced_threading(struct irqaction *new) |
| { |
| if (!force_irqthreads) |
| return; |
| if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT)) |
| return; |
| |
| new->flags |= IRQF_ONESHOT; |
| |
| if (!new->thread_fn) { |
| set_bit(IRQTF_FORCED_THREAD, &new->thread_flags); |
| new->thread_fn = new->handler; |
| new->handler = irq_default_primary_handler; |
| } |
| } |
| |
| /* |
| * Internal function to register an irqaction - typically used to |
| * allocate special interrupts that are part of the architecture. |
| */ |
| static int |
| __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) |
| { |
| struct irqaction *old, **old_ptr; |
| const char *old_name = NULL; |
| unsigned long flags, thread_mask = 0; |
| int ret, nested, shared = 0; |
| cpumask_var_t mask; |
| |
| if (!desc) |
| return -EINVAL; |
| |
| if (desc->irq_data.chip == &no_irq_chip) |
| return -ENOSYS; |
| if (!try_module_get(desc->owner)) |
| return -ENODEV; |
| /* |
| * Some drivers like serial.c use request_irq() heavily, |
| * so we have to be careful not to interfere with a |
| * running system. |
| */ |
| if (new->flags & IRQF_SAMPLE_RANDOM) { |
| /* |
| * This function might sleep, we want to call it first, |
| * outside of the atomic block. |
| * Yes, this might clear the entropy pool if the wrong |
| * driver is attempted to be loaded, without actually |
| * installing a new handler, but is this really a problem, |
| * only the sysadmin is able to do this. |
| */ |
| rand_initialize_irq(irq); |
| } |
| |
| /* |
| * Check whether the interrupt nests into another interrupt |
| * thread. |
| */ |
| nested = irq_settings_is_nested_thread(desc); |
| if (nested) { |
| if (!new->thread_fn) { |
| ret = -EINVAL; |
| goto out_mput; |
| } |
| /* |
| * Replace the primary handler which was provided from |
| * the driver for non nested interrupt handling by the |
| * dummy function which warns when called. |
| */ |
| new->handler = irq_nested_primary_handler; |
| } else { |
| if (irq_settings_can_thread(desc)) |
| irq_setup_forced_threading(new); |
| } |
| |
| /* |
| * Create a handler thread when a thread function is supplied |
| * and the interrupt does not nest into another interrupt |
| * thread. |
| */ |
| if (new->thread_fn && !nested) { |
| struct task_struct *t; |
| |
| t = kthread_create(irq_thread, new, "irq/%d-%s", irq, |
| new->name); |
| if (IS_ERR(t)) { |
| ret = PTR_ERR(t); |
| goto out_mput; |
| } |
| /* |
| * We keep the reference to the task struct even if |
| * the thread dies to avoid that the interrupt code |
| * references an already freed task_struct. |
| */ |
| get_task_struct(t); |
| new->thread = t; |
| } |
| |
| if (!alloc_cpumask_var(&mask, GFP_KERNEL)) { |
| ret = -ENOMEM; |
| goto out_thread; |
| } |
| |
| /* |
| * The following block of code has to be executed atomically |
| */ |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| old_ptr = &desc->action; |
| old = *old_ptr; |
| if (old) { |
| /* |
| * Can't share interrupts unless both agree to and are |
| * the same type (level, edge, polarity). So both flag |
| * fields must have IRQF_SHARED set and the bits which |
| * set the trigger type must match. Also all must |
| * agree on ONESHOT. |
| */ |
| if (!((old->flags & new->flags) & IRQF_SHARED) || |
| ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) || |
| ((old->flags ^ new->flags) & IRQF_ONESHOT)) { |
| old_name = old->name; |
| goto mismatch; |
| } |
| |
| /* All handlers must agree on per-cpuness */ |
| if ((old->flags & IRQF_PERCPU) != |
| (new->flags & IRQF_PERCPU)) |
| goto mismatch; |
| |
| /* add new interrupt at end of irq queue */ |
| do { |
| thread_mask |= old->thread_mask; |
| old_ptr = &old->next; |
| old = *old_ptr; |
| } while (old); |
| shared = 1; |
| } |
| |
| /* |
| * Setup the thread mask for this irqaction. Unlikely to have |
| * 32 resp 64 irqs sharing one line, but who knows. |
| */ |
| if (new->flags & IRQF_ONESHOT && thread_mask == ~0UL) { |
| ret = -EBUSY; |
| goto out_mask; |
| } |
| new->thread_mask = 1 << ffz(thread_mask); |
| |
| if (!shared) { |
| init_waitqueue_head(&desc->wait_for_threads); |
| |
| /* Setup the type (level, edge polarity) if configured: */ |
| if (new->flags & IRQF_TRIGGER_MASK) { |
| ret = __irq_set_trigger(desc, irq, |
| new->flags & IRQF_TRIGGER_MASK); |
| |
| if (ret) |
| goto out_mask; |
| } |
| |
| desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \ |
| IRQS_ONESHOT | IRQS_WAITING); |
| irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS); |
| |
| if (new->flags & IRQF_PERCPU) { |
| irqd_set(&desc->irq_data, IRQD_PER_CPU); |
| irq_settings_set_per_cpu(desc); |
| } |
| |
| if (new->flags & IRQF_ONESHOT) |
| desc->istate |= IRQS_ONESHOT; |
| |
| if (irq_settings_can_autoenable(desc)) |
| irq_startup(desc); |
| else |
| /* Undo nested disables: */ |
| desc->depth = 1; |
| |
| /* Exclude IRQ from balancing if requested */ |
| if (new->flags & IRQF_NOBALANCING) { |
| irq_settings_set_no_balancing(desc); |
| irqd_set(&desc->irq_data, IRQD_NO_BALANCING); |
| } |
| |
| /* Set default affinity mask once everything is setup */ |
| setup_affinity(irq, desc, mask); |
| |
| } else if (new->flags & IRQF_TRIGGER_MASK) { |
| unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK; |
| unsigned int omsk = irq_settings_get_trigger_mask(desc); |
| |
| if (nmsk != omsk) |
| /* hope the handler works with current trigger mode */ |
| pr_warning("IRQ %d uses trigger mode %u; requested %u\n", |
| irq, nmsk, omsk); |
| } |
| |
| new->irq = irq; |
| *old_ptr = new; |
| |
| /* Reset broken irq detection when installing new handler */ |
| desc->irq_count = 0; |
| desc->irqs_unhandled = 0; |
| |
| /* |
| * Check whether we disabled the irq via the spurious handler |
| * before. Reenable it and give it another chance. |
| */ |
| if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) { |
| desc->istate &= ~IRQS_SPURIOUS_DISABLED; |
| __enable_irq(desc, irq, false); |
| } |
| |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| |
| /* |
| * Strictly no need to wake it up, but hung_task complains |
| * when no hard interrupt wakes the thread up. |
| */ |
| if (new->thread) |
| wake_up_process(new->thread); |
| |
| register_irq_proc(irq, desc); |
| new->dir = NULL; |
| register_handler_proc(irq, new); |
| free_cpumask_var(mask); |
| |
| return 0; |
| |
| mismatch: |
| #ifdef CONFIG_DEBUG_SHIRQ |
| if (!(new->flags & IRQF_PROBE_SHARED)) { |
| printk(KERN_ERR "IRQ handler type mismatch for IRQ %d\n", irq); |
| if (old_name) |
| printk(KERN_ERR "current handler: %s\n", old_name); |
| dump_stack(); |
| } |
| #endif |
| ret = -EBUSY; |
| |
| out_mask: |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| free_cpumask_var(mask); |
| |
| out_thread: |
| if (new->thread) { |
| struct task_struct *t = new->thread; |
| |
| new->thread = NULL; |
| if (likely(!test_bit(IRQTF_DIED, &new->thread_flags))) |
| kthread_stop(t); |
| put_task_struct(t); |
| } |
| out_mput: |
| module_put(desc->owner); |
| return ret; |
| } |
| |
| /** |
| * setup_irq - setup an interrupt |
| * @irq: Interrupt line to setup |
| * @act: irqaction for the interrupt |
| * |
| * Used to statically setup interrupts in the early boot process. |
| */ |
| int setup_irq(unsigned int irq, struct irqaction *act) |
| { |
| int retval; |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| if (WARN_ON(irq_settings_is_per_cpu_devid(desc))) |
| return -EINVAL; |
| chip_bus_lock(desc); |
| retval = __setup_irq(irq, desc, act); |
| chip_bus_sync_unlock(desc); |
| |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(setup_irq); |
| |
| /* |
| * Internal function to unregister an irqaction - used to free |
| * regular and special interrupts that are part of the architecture. |
| */ |
| static struct irqaction *__free_irq(unsigned int irq, void *dev_id) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| struct irqaction *action, **action_ptr; |
| unsigned long flags; |
| |
| WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq); |
| |
| if (!desc) |
| return NULL; |
| |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| |
| /* |
| * There can be multiple actions per IRQ descriptor, find the right |
| * one based on the dev_id: |
| */ |
| action_ptr = &desc->action; |
| for (;;) { |
| action = *action_ptr; |
| |
| if (!action) { |
| WARN(1, "Trying to free already-free IRQ %d\n", irq); |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| |
| return NULL; |
| } |
| |
| if (action->dev_id == dev_id) |
| break; |
| action_ptr = &action->next; |
| } |
| |
| /* Found it - now remove it from the list of entries: */ |
| *action_ptr = action->next; |
| |
| /* Currently used only by UML, might disappear one day: */ |
| #ifdef CONFIG_IRQ_RELEASE_METHOD |
| if (desc->irq_data.chip->release) |
| desc->irq_data.chip->release(irq, dev_id); |
| #endif |
| |
| /* If this was the last handler, shut down the IRQ line: */ |
| if (!desc->action) |
| irq_shutdown(desc); |
| |
| #ifdef CONFIG_SMP |
| /* make sure affinity_hint is cleaned up */ |
| if (WARN_ON_ONCE(desc->affinity_hint)) |
| desc->affinity_hint = NULL; |
| #endif |
| |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| |
| unregister_handler_proc(irq, action); |
| |
| /* Make sure it's not being used on another CPU: */ |
| synchronize_irq(irq); |
| |
| #ifdef CONFIG_DEBUG_SHIRQ |
| /* |
| * It's a shared IRQ -- the driver ought to be prepared for an IRQ |
| * event to happen even now it's being freed, so let's make sure that |
| * is so by doing an extra call to the handler .... |
| * |
| * ( We do this after actually deregistering it, to make sure that a |
| * 'real' IRQ doesn't run in * parallel with our fake. ) |
| */ |
| if (action->flags & IRQF_SHARED) { |
| local_irq_save(flags); |
| action->handler(irq, dev_id); |
| local_irq_restore(flags); |
| } |
| #endif |
| |
| if (action->thread) { |
| if (!test_bit(IRQTF_DIED, &action->thread_flags)) |
| kthread_stop(action->thread); |
| put_task_struct(action->thread); |
| } |
| |
| module_put(desc->owner); |
| return action; |
| } |
| |
| /** |
| * remove_irq - free an interrupt |
| * @irq: Interrupt line to free |
| * @act: irqaction for the interrupt |
| * |
| * Used to remove interrupts statically setup by the early boot process. |
| */ |
| void remove_irq(unsigned int irq, struct irqaction *act) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc))) |
| __free_irq(irq, act->dev_id); |
| } |
| EXPORT_SYMBOL_GPL(remove_irq); |
| |
| /** |
| * free_irq - free an interrupt allocated with request_irq |
| * @irq: Interrupt line to free |
| * @dev_id: Device identity to free |
| * |
| * Remove an interrupt handler. The handler is removed and if the |
| * interrupt line is no longer in use by any driver it is disabled. |
| * On a shared IRQ the caller must ensure the interrupt is disabled |
| * on the card it drives before calling this function. The function |
| * does not return until any executing interrupts for this IRQ |
| * have completed. |
| * |
| * This function must not be called from interrupt context. |
| */ |
| void free_irq(unsigned int irq, void *dev_id) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc))) |
| return; |
| |
| #ifdef CONFIG_SMP |
| if (WARN_ON(desc->affinity_notify)) |
| desc->affinity_notify = NULL; |
| #endif |
| |
| chip_bus_lock(desc); |
| kfree(__free_irq(irq, dev_id)); |
| chip_bus_sync_unlock(desc); |
| } |
| EXPORT_SYMBOL(free_irq); |
| |
| /** |
| * request_threaded_irq - allocate an interrupt line |
| * @irq: Interrupt line to allocate |
| * @handler: Function to be called when the IRQ occurs. |
| * Primary handler for threaded interrupts |
| * If NULL and thread_fn != NULL the default |
| * primary handler is installed |
| * @thread_fn: Function called from the irq handler thread |
| * If NULL, no irq thread is created |
| * @irqflags: Interrupt type flags |
| * @devname: An ascii name for the claiming device |
| * @dev_id: A cookie passed back to the handler function |
| * |
| * This call allocates interrupt resources and enables the |
| * interrupt line and IRQ handling. From the point this |
| * call is made your handler function may be invoked. Since |
| * your handler function must clear any interrupt the board |
| * raises, you must take care both to initialise your hardware |
| * and to set up the interrupt handler in the right order. |
| * |
| * If you want to set up a threaded irq handler for your device |
| * then you need to supply @handler and @thread_fn. @handler ist |
| * still called in hard interrupt context and has to check |
| * whether the interrupt originates from the device. If yes it |
| * needs to disable the interrupt on the device and return |
| * IRQ_WAKE_THREAD which will wake up the handler thread and run |
| * @thread_fn. This split handler design is necessary to support |
| * shared interrupts. |
| * |
| * Dev_id must be globally unique. Normally the address of the |
| * device data structure is used as the cookie. Since the handler |
| * receives this value it makes sense to use it. |
| * |
| * If your interrupt is shared you must pass a non NULL dev_id |
| * as this is required when freeing the interrupt. |
| * |
| * Flags: |
| * |
| * IRQF_SHARED Interrupt is shared |
| * IRQF_SAMPLE_RANDOM The interrupt can be used for entropy |
| * IRQF_TRIGGER_* Specify active edge(s) or level |
| * |
| */ |
| int request_threaded_irq(unsigned int irq, irq_handler_t handler, |
| irq_handler_t thread_fn, unsigned long irqflags, |
| const char *devname, void *dev_id) |
| { |
| struct irqaction *action; |
| struct irq_desc *desc; |
| int retval; |
| |
| /* |
| * Sanity-check: shared interrupts must pass in a real dev-ID, |
| * otherwise we'll have trouble later trying to figure out |
| * which interrupt is which (messes up the interrupt freeing |
| * logic etc). |
| */ |
| if ((irqflags & IRQF_SHARED) && !dev_id) |
| return -EINVAL; |
| |
| desc = irq_to_desc(irq); |
| if (!desc) |
| return -EINVAL; |
| |
| if (!irq_settings_can_request(desc) || |
| WARN_ON(irq_settings_is_per_cpu_devid(desc))) |
| return -EINVAL; |
| |
| if (!handler) { |
| if (!thread_fn) |
| return -EINVAL; |
| handler = irq_default_primary_handler; |
| } |
| |
| action = kzalloc(sizeof(struct irqaction), GFP_KERNEL); |
| if (!action) |
| return -ENOMEM; |
| |
| action->handler = handler; |
| action->thread_fn = thread_fn; |
| action->flags = irqflags; |
| action->name = devname; |
| action->dev_id = dev_id; |
| |
| chip_bus_lock(desc); |
| retval = __setup_irq(irq, desc, action); |
| chip_bus_sync_unlock(desc); |
| |
| if (retval) |
| kfree(action); |
| |
| #ifdef CONFIG_DEBUG_SHIRQ_FIXME |
| if (!retval && (irqflags & IRQF_SHARED)) { |
| /* |
| * It's a shared IRQ -- the driver ought to be prepared for it |
| * to happen immediately, so let's make sure.... |
| * We disable the irq to make sure that a 'real' IRQ doesn't |
| * run in parallel with our fake. |
| */ |
| unsigned long flags; |
| |
| disable_irq(irq); |
| local_irq_save(flags); |
| |
| handler(irq, dev_id); |
| |
| local_irq_restore(flags); |
| enable_irq(irq); |
| } |
| #endif |
| return retval; |
| } |
| EXPORT_SYMBOL(request_threaded_irq); |
| |
| /** |
| * request_any_context_irq - allocate an interrupt line |
| * @irq: Interrupt line to allocate |
| * @handler: Function to be called when the IRQ occurs. |
| * Threaded handler for threaded interrupts. |
| * @flags: Interrupt type flags |
| * @name: An ascii name for the claiming device |
| * @dev_id: A cookie passed back to the handler function |
| * |
| * This call allocates interrupt resources and enables the |
| * interrupt line and IRQ handling. It selects either a |
| * hardirq or threaded handling method depending on the |
| * context. |
| * |
| * On failure, it returns a negative value. On success, |
| * it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED. |
| */ |
| int request_any_context_irq(unsigned int irq, irq_handler_t handler, |
| unsigned long flags, const char *name, void *dev_id) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| int ret; |
| |
| if (!desc) |
| return -EINVAL; |
| |
| if (irq_settings_is_nested_thread(desc)) { |
| ret = request_threaded_irq(irq, NULL, handler, |
| flags, name, dev_id); |
| return !ret ? IRQC_IS_NESTED : ret; |
| } |
| |
| ret = request_irq(irq, handler, flags, name, dev_id); |
| return !ret ? IRQC_IS_HARDIRQ : ret; |
| } |
| EXPORT_SYMBOL_GPL(request_any_context_irq); |
| |
| void enable_percpu_irq(unsigned int irq, unsigned int type) |
| { |
| unsigned int cpu = smp_processor_id(); |
| unsigned long flags; |
| struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU); |
| |
| if (!desc) |
| return; |
| |
| type &= IRQ_TYPE_SENSE_MASK; |
| if (type != IRQ_TYPE_NONE) { |
| int ret; |
| |
| ret = __irq_set_trigger(desc, irq, type); |
| |
| if (ret) { |
| WARN(1, "failed to set type for IRQ%d\n", irq); |
| goto out; |
| } |
| } |
| |
| irq_percpu_enable(desc, cpu); |
| out: |
| irq_put_desc_unlock(desc, flags); |
| } |
| |
| void disable_percpu_irq(unsigned int irq) |
| { |
| unsigned int cpu = smp_processor_id(); |
| unsigned long flags; |
| struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU); |
| |
| if (!desc) |
| return; |
| |
| irq_percpu_disable(desc, cpu); |
| irq_put_desc_unlock(desc, flags); |
| } |
| |
| /* |
| * Internal function to unregister a percpu irqaction. |
| */ |
| static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| struct irqaction *action; |
| unsigned long flags; |
| |
| WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq); |
| |
| if (!desc) |
| return NULL; |
| |
| raw_spin_lock_irqsave(&desc->lock, flags); |
| |
| action = desc->action; |
| if (!action || action->percpu_dev_id != dev_id) { |
| WARN(1, "Trying to free already-free IRQ %d\n", irq); |
| goto bad; |
| } |
| |
| if (!cpumask_empty(desc->percpu_enabled)) { |
| WARN(1, "percpu IRQ %d still enabled on CPU%d!\n", |
| irq, cpumask_first(desc->percpu_enabled)); |
| goto bad; |
| } |
| |
| /* Found it - now remove it from the list of entries: */ |
| desc->action = NULL; |
| |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| |
| unregister_handler_proc(irq, action); |
| |
| module_put(desc->owner); |
| return action; |
| |
| bad: |
| raw_spin_unlock_irqrestore(&desc->lock, flags); |
| return NULL; |
| } |
| |
| /** |
| * remove_percpu_irq - free a per-cpu interrupt |
| * @irq: Interrupt line to free |
| * @act: irqaction for the interrupt |
| * |
| * Used to remove interrupts statically setup by the early boot process. |
| */ |
| void remove_percpu_irq(unsigned int irq, struct irqaction *act) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| if (desc && irq_settings_is_per_cpu_devid(desc)) |
| __free_percpu_irq(irq, act->percpu_dev_id); |
| } |
| |
| /** |
| * free_percpu_irq - free an interrupt allocated with request_percpu_irq |
| * @irq: Interrupt line to free |
| * @dev_id: Device identity to free |
| * |
| * Remove a percpu interrupt handler. The handler is removed, but |
| * the interrupt line is not disabled. This must be done on each |
| * CPU before calling this function. The function does not return |
| * until any executing interrupts for this IRQ have completed. |
| * |
| * This function must not be called from interrupt context. |
| */ |
| void free_percpu_irq(unsigned int irq, void __percpu *dev_id) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| |
| if (!desc || !irq_settings_is_per_cpu_devid(desc)) |
| return; |
| |
| chip_bus_lock(desc); |
| kfree(__free_percpu_irq(irq, dev_id)); |
| chip_bus_sync_unlock(desc); |
| } |
| |
| /** |
| * setup_percpu_irq - setup a per-cpu interrupt |
| * @irq: Interrupt line to setup |
| * @act: irqaction for the interrupt |
| * |
| * Used to statically setup per-cpu interrupts in the early boot process. |
| */ |
| int setup_percpu_irq(unsigned int irq, struct irqaction *act) |
| { |
| struct irq_desc *desc = irq_to_desc(irq); |
| int retval; |
| |
| if (!desc || !irq_settings_is_per_cpu_devid(desc)) |
| return -EINVAL; |
| chip_bus_lock(desc); |
| retval = __setup_irq(irq, desc, act); |
| chip_bus_sync_unlock(desc); |
| |
| return retval; |
| } |
| |
| /** |
| * request_percpu_irq - allocate a percpu interrupt line |
| * @irq: Interrupt line to allocate |
| * @handler: Function to be called when the IRQ occurs. |
| * @devname: An ascii name for the claiming device |
| * @dev_id: A percpu cookie passed back to the handler function |
| * |
| * This call allocates interrupt resources, but doesn't |
| * automatically enable the interrupt. It has to be done on each |
| * CPU using enable_percpu_irq(). |
| * |
| * Dev_id must be globally unique. It is a per-cpu variable, and |
| * the handler gets called with the interrupted CPU's instance of |
| * that variable. |
| */ |
| int request_percpu_irq(unsigned int irq, irq_handler_t handler, |
| const char *devname, void __percpu *dev_id) |
| { |
| struct irqaction *action; |
| struct irq_desc *desc; |
| int retval; |
| |
| if (!dev_id) |
| return -EINVAL; |
| |
| desc = irq_to_desc(irq); |
| if (!desc || !irq_settings_can_request(desc) || |
| !irq_settings_is_per_cpu_devid(desc)) |
| return -EINVAL; |
| |
| action = kzalloc(sizeof(struct irqaction), GFP_KERNEL); |
| if (!action) |
| return -ENOMEM; |
| |
| action->handler = handler; |
| action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND; |
| action->name = devname; |
| action->percpu_dev_id = dev_id; |
| |
| chip_bus_lock(desc); |
| retval = __setup_irq(irq, desc, action); |
| chip_bus_sync_unlock(desc); |
| |
| if (retval) |
| kfree(action); |
| |
| return retval; |
| } |