| /* |
| * Copyright 2007-8 Advanced Micro Devices, Inc. |
| * Copyright 2008 Red Hat Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: Dave Airlie |
| * Alex Deucher |
| */ |
| #include "drmP.h" |
| #include "radeon_drm.h" |
| #include "radeon.h" |
| #include "atom.h" |
| |
| /** |
| * radeon_ddc_probe |
| * |
| */ |
| bool radeon_ddc_probe(struct radeon_connector *radeon_connector) |
| { |
| u8 out_buf[] = { 0x0, 0x0}; |
| u8 buf[2]; |
| int ret; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = 0x50, |
| .flags = 0, |
| .len = 1, |
| .buf = out_buf, |
| }, |
| { |
| .addr = 0x50, |
| .flags = I2C_M_RD, |
| .len = 1, |
| .buf = buf, |
| } |
| }; |
| |
| /* on hw with routers, select right port */ |
| if (radeon_connector->router.valid) |
| radeon_router_select_port(radeon_connector); |
| |
| ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2); |
| if (ret == 2) |
| return true; |
| |
| return false; |
| } |
| |
| /* bit banging i2c */ |
| |
| static void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state) |
| { |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| uint32_t temp; |
| |
| /* RV410 appears to have a bug where the hw i2c in reset |
| * holds the i2c port in a bad state - switch hw i2c away before |
| * doing DDC - do this for all r200s/r300s/r400s for safety sake |
| */ |
| if (rec->hw_capable) { |
| if ((rdev->family >= CHIP_R200) && !ASIC_IS_AVIVO(rdev)) { |
| u32 reg; |
| |
| if (rdev->family >= CHIP_RV350) |
| reg = RADEON_GPIO_MONID; |
| else if ((rdev->family == CHIP_R300) || |
| (rdev->family == CHIP_R350)) |
| reg = RADEON_GPIO_DVI_DDC; |
| else |
| reg = RADEON_GPIO_CRT2_DDC; |
| |
| mutex_lock(&rdev->dc_hw_i2c_mutex); |
| if (rec->a_clk_reg == reg) { |
| WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST | |
| R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1))); |
| } else { |
| WREG32(RADEON_DVI_I2C_CNTL_0, (RADEON_I2C_SOFT_RST | |
| R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3))); |
| } |
| mutex_unlock(&rdev->dc_hw_i2c_mutex); |
| } |
| } |
| |
| /* switch the pads to ddc mode */ |
| if (ASIC_IS_DCE3(rdev) && rec->hw_capable) { |
| temp = RREG32(rec->mask_clk_reg); |
| temp &= ~(1 << 16); |
| WREG32(rec->mask_clk_reg, temp); |
| } |
| |
| /* clear the output pin values */ |
| temp = RREG32(rec->a_clk_reg) & ~rec->a_clk_mask; |
| WREG32(rec->a_clk_reg, temp); |
| |
| temp = RREG32(rec->a_data_reg) & ~rec->a_data_mask; |
| WREG32(rec->a_data_reg, temp); |
| |
| /* set the pins to input */ |
| temp = RREG32(rec->en_clk_reg) & ~rec->en_clk_mask; |
| WREG32(rec->en_clk_reg, temp); |
| |
| temp = RREG32(rec->en_data_reg) & ~rec->en_data_mask; |
| WREG32(rec->en_data_reg, temp); |
| |
| /* mask the gpio pins for software use */ |
| temp = RREG32(rec->mask_clk_reg); |
| if (lock_state) |
| temp |= rec->mask_clk_mask; |
| else |
| temp &= ~rec->mask_clk_mask; |
| WREG32(rec->mask_clk_reg, temp); |
| temp = RREG32(rec->mask_clk_reg); |
| |
| temp = RREG32(rec->mask_data_reg); |
| if (lock_state) |
| temp |= rec->mask_data_mask; |
| else |
| temp &= ~rec->mask_data_mask; |
| WREG32(rec->mask_data_reg, temp); |
| temp = RREG32(rec->mask_data_reg); |
| } |
| |
| static int get_clock(void *i2c_priv) |
| { |
| struct radeon_i2c_chan *i2c = i2c_priv; |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| uint32_t val; |
| |
| /* read the value off the pin */ |
| val = RREG32(rec->y_clk_reg); |
| val &= rec->y_clk_mask; |
| |
| return (val != 0); |
| } |
| |
| |
| static int get_data(void *i2c_priv) |
| { |
| struct radeon_i2c_chan *i2c = i2c_priv; |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| uint32_t val; |
| |
| /* read the value off the pin */ |
| val = RREG32(rec->y_data_reg); |
| val &= rec->y_data_mask; |
| |
| return (val != 0); |
| } |
| |
| static void set_clock(void *i2c_priv, int clock) |
| { |
| struct radeon_i2c_chan *i2c = i2c_priv; |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| uint32_t val; |
| |
| /* set pin direction */ |
| val = RREG32(rec->en_clk_reg) & ~rec->en_clk_mask; |
| val |= clock ? 0 : rec->en_clk_mask; |
| WREG32(rec->en_clk_reg, val); |
| } |
| |
| static void set_data(void *i2c_priv, int data) |
| { |
| struct radeon_i2c_chan *i2c = i2c_priv; |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| uint32_t val; |
| |
| /* set pin direction */ |
| val = RREG32(rec->en_data_reg) & ~rec->en_data_mask; |
| val |= data ? 0 : rec->en_data_mask; |
| WREG32(rec->en_data_reg, val); |
| } |
| |
| static int pre_xfer(struct i2c_adapter *i2c_adap) |
| { |
| struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap); |
| |
| radeon_i2c_do_lock(i2c, 1); |
| |
| return 0; |
| } |
| |
| static void post_xfer(struct i2c_adapter *i2c_adap) |
| { |
| struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap); |
| |
| radeon_i2c_do_lock(i2c, 0); |
| } |
| |
| /* hw i2c */ |
| |
| static u32 radeon_get_i2c_prescale(struct radeon_device *rdev) |
| { |
| u32 sclk = radeon_get_engine_clock(rdev); |
| u32 prescale = 0; |
| u32 nm; |
| u8 n, m, loop; |
| int i2c_clock; |
| |
| switch (rdev->family) { |
| case CHIP_R100: |
| case CHIP_RV100: |
| case CHIP_RS100: |
| case CHIP_RV200: |
| case CHIP_RS200: |
| case CHIP_R200: |
| case CHIP_RV250: |
| case CHIP_RS300: |
| case CHIP_RV280: |
| case CHIP_R300: |
| case CHIP_R350: |
| case CHIP_RV350: |
| i2c_clock = 60; |
| nm = (sclk * 10) / (i2c_clock * 4); |
| for (loop = 1; loop < 255; loop++) { |
| if ((nm / loop) < loop) |
| break; |
| } |
| n = loop - 1; |
| m = loop - 2; |
| prescale = m | (n << 8); |
| break; |
| case CHIP_RV380: |
| case CHIP_RS400: |
| case CHIP_RS480: |
| case CHIP_R420: |
| case CHIP_R423: |
| case CHIP_RV410: |
| prescale = (((sclk * 10)/(4 * 128 * 100) + 1) << 8) + 128; |
| break; |
| case CHIP_RS600: |
| case CHIP_RS690: |
| case CHIP_RS740: |
| /* todo */ |
| break; |
| case CHIP_RV515: |
| case CHIP_R520: |
| case CHIP_RV530: |
| case CHIP_RV560: |
| case CHIP_RV570: |
| case CHIP_R580: |
| i2c_clock = 50; |
| if (rdev->family == CHIP_R520) |
| prescale = (127 << 8) + ((sclk * 10) / (4 * 127 * i2c_clock)); |
| else |
| prescale = (((sclk * 10)/(4 * 128 * 100) + 1) << 8) + 128; |
| break; |
| case CHIP_R600: |
| case CHIP_RV610: |
| case CHIP_RV630: |
| case CHIP_RV670: |
| /* todo */ |
| break; |
| case CHIP_RV620: |
| case CHIP_RV635: |
| case CHIP_RS780: |
| case CHIP_RS880: |
| case CHIP_RV770: |
| case CHIP_RV730: |
| case CHIP_RV710: |
| case CHIP_RV740: |
| /* todo */ |
| break; |
| case CHIP_CEDAR: |
| case CHIP_REDWOOD: |
| case CHIP_JUNIPER: |
| case CHIP_CYPRESS: |
| case CHIP_HEMLOCK: |
| /* todo */ |
| break; |
| default: |
| DRM_ERROR("i2c: unhandled radeon chip\n"); |
| break; |
| } |
| return prescale; |
| } |
| |
| |
| /* hw i2c engine for r1xx-4xx hardware |
| * hw can buffer up to 15 bytes |
| */ |
| static int r100_hw_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap); |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| struct i2c_msg *p; |
| int i, j, k, ret = num; |
| u32 prescale; |
| u32 i2c_cntl_0, i2c_cntl_1, i2c_data; |
| u32 tmp, reg; |
| |
| mutex_lock(&rdev->dc_hw_i2c_mutex); |
| /* take the pm lock since we need a constant sclk */ |
| mutex_lock(&rdev->pm.mutex); |
| |
| prescale = radeon_get_i2c_prescale(rdev); |
| |
| reg = ((prescale << RADEON_I2C_PRESCALE_SHIFT) | |
| RADEON_I2C_DRIVE_EN | |
| RADEON_I2C_START | |
| RADEON_I2C_STOP | |
| RADEON_I2C_GO); |
| |
| if (rdev->is_atom_bios) { |
| tmp = RREG32(RADEON_BIOS_6_SCRATCH); |
| WREG32(RADEON_BIOS_6_SCRATCH, tmp | ATOM_S6_HW_I2C_BUSY_STATE); |
| } |
| |
| if (rec->mm_i2c) { |
| i2c_cntl_0 = RADEON_I2C_CNTL_0; |
| i2c_cntl_1 = RADEON_I2C_CNTL_1; |
| i2c_data = RADEON_I2C_DATA; |
| } else { |
| i2c_cntl_0 = RADEON_DVI_I2C_CNTL_0; |
| i2c_cntl_1 = RADEON_DVI_I2C_CNTL_1; |
| i2c_data = RADEON_DVI_I2C_DATA; |
| |
| switch (rdev->family) { |
| case CHIP_R100: |
| case CHIP_RV100: |
| case CHIP_RS100: |
| case CHIP_RV200: |
| case CHIP_RS200: |
| case CHIP_RS300: |
| switch (rec->mask_clk_reg) { |
| case RADEON_GPIO_DVI_DDC: |
| /* no gpio select bit */ |
| break; |
| default: |
| DRM_ERROR("gpio not supported with hw i2c\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| break; |
| case CHIP_R200: |
| /* only bit 4 on r200 */ |
| switch (rec->mask_clk_reg) { |
| case RADEON_GPIO_DVI_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1); |
| break; |
| case RADEON_GPIO_MONID: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3); |
| break; |
| default: |
| DRM_ERROR("gpio not supported with hw i2c\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| break; |
| case CHIP_RV250: |
| case CHIP_RV280: |
| /* bits 3 and 4 */ |
| switch (rec->mask_clk_reg) { |
| case RADEON_GPIO_DVI_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1); |
| break; |
| case RADEON_GPIO_VGA_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC2); |
| break; |
| case RADEON_GPIO_CRT2_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3); |
| break; |
| default: |
| DRM_ERROR("gpio not supported with hw i2c\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| break; |
| case CHIP_R300: |
| case CHIP_R350: |
| /* only bit 4 on r300/r350 */ |
| switch (rec->mask_clk_reg) { |
| case RADEON_GPIO_VGA_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1); |
| break; |
| case RADEON_GPIO_DVI_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3); |
| break; |
| default: |
| DRM_ERROR("gpio not supported with hw i2c\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| break; |
| case CHIP_RV350: |
| case CHIP_RV380: |
| case CHIP_R420: |
| case CHIP_R423: |
| case CHIP_RV410: |
| case CHIP_RS400: |
| case CHIP_RS480: |
| /* bits 3 and 4 */ |
| switch (rec->mask_clk_reg) { |
| case RADEON_GPIO_VGA_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC1); |
| break; |
| case RADEON_GPIO_DVI_DDC: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC2); |
| break; |
| case RADEON_GPIO_MONID: |
| reg |= R200_DVI_I2C_PIN_SEL(R200_SEL_DDC3); |
| break; |
| default: |
| DRM_ERROR("gpio not supported with hw i2c\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| break; |
| default: |
| DRM_ERROR("unsupported asic\n"); |
| ret = -EINVAL; |
| goto done; |
| break; |
| } |
| } |
| |
| /* check for bus probe */ |
| p = &msgs[0]; |
| if ((num == 1) && (p->len == 0)) { |
| WREG32(i2c_cntl_0, (RADEON_I2C_DONE | |
| RADEON_I2C_NACK | |
| RADEON_I2C_HALT | |
| RADEON_I2C_SOFT_RST)); |
| WREG32(i2c_data, (p->addr << 1) & 0xff); |
| WREG32(i2c_data, 0); |
| WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) | |
| (1 << RADEON_I2C_ADDR_COUNT_SHIFT) | |
| RADEON_I2C_EN | |
| (48 << RADEON_I2C_TIME_LIMIT_SHIFT))); |
| WREG32(i2c_cntl_0, reg); |
| for (k = 0; k < 32; k++) { |
| udelay(10); |
| tmp = RREG32(i2c_cntl_0); |
| if (tmp & RADEON_I2C_GO) |
| continue; |
| tmp = RREG32(i2c_cntl_0); |
| if (tmp & RADEON_I2C_DONE) |
| break; |
| else { |
| DRM_DEBUG("i2c write error 0x%08x\n", tmp); |
| WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| goto done; |
| } |
| |
| for (i = 0; i < num; i++) { |
| p = &msgs[i]; |
| for (j = 0; j < p->len; j++) { |
| if (p->flags & I2C_M_RD) { |
| WREG32(i2c_cntl_0, (RADEON_I2C_DONE | |
| RADEON_I2C_NACK | |
| RADEON_I2C_HALT | |
| RADEON_I2C_SOFT_RST)); |
| WREG32(i2c_data, ((p->addr << 1) & 0xff) | 0x1); |
| WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) | |
| (1 << RADEON_I2C_ADDR_COUNT_SHIFT) | |
| RADEON_I2C_EN | |
| (48 << RADEON_I2C_TIME_LIMIT_SHIFT))); |
| WREG32(i2c_cntl_0, reg | RADEON_I2C_RECEIVE); |
| for (k = 0; k < 32; k++) { |
| udelay(10); |
| tmp = RREG32(i2c_cntl_0); |
| if (tmp & RADEON_I2C_GO) |
| continue; |
| tmp = RREG32(i2c_cntl_0); |
| if (tmp & RADEON_I2C_DONE) |
| break; |
| else { |
| DRM_DEBUG("i2c read error 0x%08x\n", tmp); |
| WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| p->buf[j] = RREG32(i2c_data) & 0xff; |
| } else { |
| WREG32(i2c_cntl_0, (RADEON_I2C_DONE | |
| RADEON_I2C_NACK | |
| RADEON_I2C_HALT | |
| RADEON_I2C_SOFT_RST)); |
| WREG32(i2c_data, (p->addr << 1) & 0xff); |
| WREG32(i2c_data, p->buf[j]); |
| WREG32(i2c_cntl_1, ((1 << RADEON_I2C_DATA_COUNT_SHIFT) | |
| (1 << RADEON_I2C_ADDR_COUNT_SHIFT) | |
| RADEON_I2C_EN | |
| (48 << RADEON_I2C_TIME_LIMIT_SHIFT))); |
| WREG32(i2c_cntl_0, reg); |
| for (k = 0; k < 32; k++) { |
| udelay(10); |
| tmp = RREG32(i2c_cntl_0); |
| if (tmp & RADEON_I2C_GO) |
| continue; |
| tmp = RREG32(i2c_cntl_0); |
| if (tmp & RADEON_I2C_DONE) |
| break; |
| else { |
| DRM_DEBUG("i2c write error 0x%08x\n", tmp); |
| WREG32(i2c_cntl_0, tmp | RADEON_I2C_ABORT); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| } |
| } |
| } |
| |
| done: |
| WREG32(i2c_cntl_0, 0); |
| WREG32(i2c_cntl_1, 0); |
| WREG32(i2c_cntl_0, (RADEON_I2C_DONE | |
| RADEON_I2C_NACK | |
| RADEON_I2C_HALT | |
| RADEON_I2C_SOFT_RST)); |
| |
| if (rdev->is_atom_bios) { |
| tmp = RREG32(RADEON_BIOS_6_SCRATCH); |
| tmp &= ~ATOM_S6_HW_I2C_BUSY_STATE; |
| WREG32(RADEON_BIOS_6_SCRATCH, tmp); |
| } |
| |
| mutex_unlock(&rdev->pm.mutex); |
| mutex_unlock(&rdev->dc_hw_i2c_mutex); |
| |
| return ret; |
| } |
| |
| /* hw i2c engine for r5xx hardware |
| * hw can buffer up to 15 bytes |
| */ |
| static int r500_hw_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap); |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| struct i2c_msg *p; |
| int i, j, remaining, current_count, buffer_offset, ret = num; |
| u32 prescale; |
| u32 tmp, reg; |
| u32 saved1, saved2; |
| |
| mutex_lock(&rdev->dc_hw_i2c_mutex); |
| /* take the pm lock since we need a constant sclk */ |
| mutex_lock(&rdev->pm.mutex); |
| |
| prescale = radeon_get_i2c_prescale(rdev); |
| |
| /* clear gpio mask bits */ |
| tmp = RREG32(rec->mask_clk_reg); |
| tmp &= ~rec->mask_clk_mask; |
| WREG32(rec->mask_clk_reg, tmp); |
| tmp = RREG32(rec->mask_clk_reg); |
| |
| tmp = RREG32(rec->mask_data_reg); |
| tmp &= ~rec->mask_data_mask; |
| WREG32(rec->mask_data_reg, tmp); |
| tmp = RREG32(rec->mask_data_reg); |
| |
| /* clear pin values */ |
| tmp = RREG32(rec->a_clk_reg); |
| tmp &= ~rec->a_clk_mask; |
| WREG32(rec->a_clk_reg, tmp); |
| tmp = RREG32(rec->a_clk_reg); |
| |
| tmp = RREG32(rec->a_data_reg); |
| tmp &= ~rec->a_data_mask; |
| WREG32(rec->a_data_reg, tmp); |
| tmp = RREG32(rec->a_data_reg); |
| |
| /* set the pins to input */ |
| tmp = RREG32(rec->en_clk_reg); |
| tmp &= ~rec->en_clk_mask; |
| WREG32(rec->en_clk_reg, tmp); |
| tmp = RREG32(rec->en_clk_reg); |
| |
| tmp = RREG32(rec->en_data_reg); |
| tmp &= ~rec->en_data_mask; |
| WREG32(rec->en_data_reg, tmp); |
| tmp = RREG32(rec->en_data_reg); |
| |
| /* */ |
| tmp = RREG32(RADEON_BIOS_6_SCRATCH); |
| WREG32(RADEON_BIOS_6_SCRATCH, tmp | ATOM_S6_HW_I2C_BUSY_STATE); |
| saved1 = RREG32(AVIVO_DC_I2C_CONTROL1); |
| saved2 = RREG32(0x494); |
| WREG32(0x494, saved2 | 0x1); |
| |
| WREG32(AVIVO_DC_I2C_ARBITRATION, AVIVO_DC_I2C_SW_WANTS_TO_USE_I2C); |
| for (i = 0; i < 50; i++) { |
| udelay(1); |
| if (RREG32(AVIVO_DC_I2C_ARBITRATION) & AVIVO_DC_I2C_SW_CAN_USE_I2C) |
| break; |
| } |
| if (i == 50) { |
| DRM_ERROR("failed to get i2c bus\n"); |
| ret = -EBUSY; |
| goto done; |
| } |
| |
| reg = AVIVO_DC_I2C_START | AVIVO_DC_I2C_STOP | AVIVO_DC_I2C_EN; |
| switch (rec->mask_clk_reg) { |
| case AVIVO_DC_GPIO_DDC1_MASK: |
| reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC1); |
| break; |
| case AVIVO_DC_GPIO_DDC2_MASK: |
| reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC2); |
| break; |
| case AVIVO_DC_GPIO_DDC3_MASK: |
| reg |= AVIVO_DC_I2C_PIN_SELECT(AVIVO_SEL_DDC3); |
| break; |
| default: |
| DRM_ERROR("gpio not supported with hw i2c\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| /* check for bus probe */ |
| p = &msgs[0]; |
| if ((num == 1) && (p->len == 0)) { |
| WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE | |
| AVIVO_DC_I2C_NACK | |
| AVIVO_DC_I2C_HALT)); |
| WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET); |
| udelay(1); |
| WREG32(AVIVO_DC_I2C_RESET, 0); |
| |
| WREG32(AVIVO_DC_I2C_DATA, (p->addr << 1) & 0xff); |
| WREG32(AVIVO_DC_I2C_DATA, 0); |
| |
| WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48)); |
| WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) | |
| AVIVO_DC_I2C_DATA_COUNT(1) | |
| (prescale << 16))); |
| WREG32(AVIVO_DC_I2C_CONTROL1, reg); |
| WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO); |
| for (j = 0; j < 200; j++) { |
| udelay(50); |
| tmp = RREG32(AVIVO_DC_I2C_STATUS1); |
| if (tmp & AVIVO_DC_I2C_GO) |
| continue; |
| tmp = RREG32(AVIVO_DC_I2C_STATUS1); |
| if (tmp & AVIVO_DC_I2C_DONE) |
| break; |
| else { |
| DRM_DEBUG("i2c write error 0x%08x\n", tmp); |
| WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| goto done; |
| } |
| |
| for (i = 0; i < num; i++) { |
| p = &msgs[i]; |
| remaining = p->len; |
| buffer_offset = 0; |
| if (p->flags & I2C_M_RD) { |
| while (remaining) { |
| if (remaining > 15) |
| current_count = 15; |
| else |
| current_count = remaining; |
| WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE | |
| AVIVO_DC_I2C_NACK | |
| AVIVO_DC_I2C_HALT)); |
| WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET); |
| udelay(1); |
| WREG32(AVIVO_DC_I2C_RESET, 0); |
| |
| WREG32(AVIVO_DC_I2C_DATA, ((p->addr << 1) & 0xff) | 0x1); |
| WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48)); |
| WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) | |
| AVIVO_DC_I2C_DATA_COUNT(current_count) | |
| (prescale << 16))); |
| WREG32(AVIVO_DC_I2C_CONTROL1, reg | AVIVO_DC_I2C_RECEIVE); |
| WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO); |
| for (j = 0; j < 200; j++) { |
| udelay(50); |
| tmp = RREG32(AVIVO_DC_I2C_STATUS1); |
| if (tmp & AVIVO_DC_I2C_GO) |
| continue; |
| tmp = RREG32(AVIVO_DC_I2C_STATUS1); |
| if (tmp & AVIVO_DC_I2C_DONE) |
| break; |
| else { |
| DRM_DEBUG("i2c read error 0x%08x\n", tmp); |
| WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| for (j = 0; j < current_count; j++) |
| p->buf[buffer_offset + j] = RREG32(AVIVO_DC_I2C_DATA) & 0xff; |
| remaining -= current_count; |
| buffer_offset += current_count; |
| } |
| } else { |
| while (remaining) { |
| if (remaining > 15) |
| current_count = 15; |
| else |
| current_count = remaining; |
| WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE | |
| AVIVO_DC_I2C_NACK | |
| AVIVO_DC_I2C_HALT)); |
| WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET); |
| udelay(1); |
| WREG32(AVIVO_DC_I2C_RESET, 0); |
| |
| WREG32(AVIVO_DC_I2C_DATA, (p->addr << 1) & 0xff); |
| for (j = 0; j < current_count; j++) |
| WREG32(AVIVO_DC_I2C_DATA, p->buf[buffer_offset + j]); |
| |
| WREG32(AVIVO_DC_I2C_CONTROL3, AVIVO_DC_I2C_TIME_LIMIT(48)); |
| WREG32(AVIVO_DC_I2C_CONTROL2, (AVIVO_DC_I2C_ADDR_COUNT(1) | |
| AVIVO_DC_I2C_DATA_COUNT(current_count) | |
| (prescale << 16))); |
| WREG32(AVIVO_DC_I2C_CONTROL1, reg); |
| WREG32(AVIVO_DC_I2C_STATUS1, AVIVO_DC_I2C_GO); |
| for (j = 0; j < 200; j++) { |
| udelay(50); |
| tmp = RREG32(AVIVO_DC_I2C_STATUS1); |
| if (tmp & AVIVO_DC_I2C_GO) |
| continue; |
| tmp = RREG32(AVIVO_DC_I2C_STATUS1); |
| if (tmp & AVIVO_DC_I2C_DONE) |
| break; |
| else { |
| DRM_DEBUG("i2c write error 0x%08x\n", tmp); |
| WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_ABORT); |
| ret = -EIO; |
| goto done; |
| } |
| } |
| remaining -= current_count; |
| buffer_offset += current_count; |
| } |
| } |
| } |
| |
| done: |
| WREG32(AVIVO_DC_I2C_STATUS1, (AVIVO_DC_I2C_DONE | |
| AVIVO_DC_I2C_NACK | |
| AVIVO_DC_I2C_HALT)); |
| WREG32(AVIVO_DC_I2C_RESET, AVIVO_DC_I2C_SOFT_RESET); |
| udelay(1); |
| WREG32(AVIVO_DC_I2C_RESET, 0); |
| |
| WREG32(AVIVO_DC_I2C_ARBITRATION, AVIVO_DC_I2C_SW_DONE_USING_I2C); |
| WREG32(AVIVO_DC_I2C_CONTROL1, saved1); |
| WREG32(0x494, saved2); |
| tmp = RREG32(RADEON_BIOS_6_SCRATCH); |
| tmp &= ~ATOM_S6_HW_I2C_BUSY_STATE; |
| WREG32(RADEON_BIOS_6_SCRATCH, tmp); |
| |
| mutex_unlock(&rdev->pm.mutex); |
| mutex_unlock(&rdev->dc_hw_i2c_mutex); |
| |
| return ret; |
| } |
| |
| static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap); |
| struct radeon_device *rdev = i2c->dev->dev_private; |
| struct radeon_i2c_bus_rec *rec = &i2c->rec; |
| int ret = 0; |
| |
| switch (rdev->family) { |
| case CHIP_R100: |
| case CHIP_RV100: |
| case CHIP_RS100: |
| case CHIP_RV200: |
| case CHIP_RS200: |
| case CHIP_R200: |
| case CHIP_RV250: |
| case CHIP_RS300: |
| case CHIP_RV280: |
| case CHIP_R300: |
| case CHIP_R350: |
| case CHIP_RV350: |
| case CHIP_RV380: |
| case CHIP_R420: |
| case CHIP_R423: |
| case CHIP_RV410: |
| case CHIP_RS400: |
| case CHIP_RS480: |
| ret = r100_hw_i2c_xfer(i2c_adap, msgs, num); |
| break; |
| case CHIP_RS600: |
| case CHIP_RS690: |
| case CHIP_RS740: |
| /* XXX fill in hw i2c implementation */ |
| break; |
| case CHIP_RV515: |
| case CHIP_R520: |
| case CHIP_RV530: |
| case CHIP_RV560: |
| case CHIP_RV570: |
| case CHIP_R580: |
| if (rec->mm_i2c) |
| ret = r100_hw_i2c_xfer(i2c_adap, msgs, num); |
| else |
| ret = r500_hw_i2c_xfer(i2c_adap, msgs, num); |
| break; |
| case CHIP_R600: |
| case CHIP_RV610: |
| case CHIP_RV630: |
| case CHIP_RV670: |
| /* XXX fill in hw i2c implementation */ |
| break; |
| case CHIP_RV620: |
| case CHIP_RV635: |
| case CHIP_RS780: |
| case CHIP_RS880: |
| case CHIP_RV770: |
| case CHIP_RV730: |
| case CHIP_RV710: |
| case CHIP_RV740: |
| /* XXX fill in hw i2c implementation */ |
| break; |
| case CHIP_CEDAR: |
| case CHIP_REDWOOD: |
| case CHIP_JUNIPER: |
| case CHIP_CYPRESS: |
| case CHIP_HEMLOCK: |
| /* XXX fill in hw i2c implementation */ |
| break; |
| default: |
| DRM_ERROR("i2c: unhandled radeon chip\n"); |
| ret = -EIO; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static u32 radeon_hw_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm radeon_i2c_algo = { |
| .master_xfer = radeon_hw_i2c_xfer, |
| .functionality = radeon_hw_i2c_func, |
| }; |
| |
| struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev, |
| struct radeon_i2c_bus_rec *rec, |
| const char *name) |
| { |
| struct radeon_device *rdev = dev->dev_private; |
| struct radeon_i2c_chan *i2c; |
| int ret; |
| |
| i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL); |
| if (i2c == NULL) |
| return NULL; |
| |
| i2c->rec = *rec; |
| i2c->adapter.owner = THIS_MODULE; |
| i2c->dev = dev; |
| i2c_set_adapdata(&i2c->adapter, i2c); |
| if (rec->mm_i2c || |
| (rec->hw_capable && |
| radeon_hw_i2c && |
| ((rdev->family <= CHIP_RS480) || |
| ((rdev->family >= CHIP_RV515) && (rdev->family <= CHIP_R580))))) { |
| /* set the radeon hw i2c adapter */ |
| sprintf(i2c->adapter.name, "Radeon i2c hw bus %s", name); |
| i2c->adapter.algo = &radeon_i2c_algo; |
| ret = i2c_add_adapter(&i2c->adapter); |
| if (ret) { |
| DRM_ERROR("Failed to register hw i2c %s\n", name); |
| goto out_free; |
| } |
| } else { |
| /* set the radeon bit adapter */ |
| sprintf(i2c->adapter.name, "Radeon i2c bit bus %s", name); |
| i2c->adapter.algo_data = &i2c->algo.bit; |
| i2c->algo.bit.pre_xfer = pre_xfer; |
| i2c->algo.bit.post_xfer = post_xfer; |
| i2c->algo.bit.setsda = set_data; |
| i2c->algo.bit.setscl = set_clock; |
| i2c->algo.bit.getsda = get_data; |
| i2c->algo.bit.getscl = get_clock; |
| i2c->algo.bit.udelay = 20; |
| /* vesa says 2.2 ms is enough, 1 jiffy doesn't seem to always |
| * make this, 2 jiffies is a lot more reliable */ |
| i2c->algo.bit.timeout = 2; |
| i2c->algo.bit.data = i2c; |
| ret = i2c_bit_add_bus(&i2c->adapter); |
| if (ret) { |
| DRM_ERROR("Failed to register bit i2c %s\n", name); |
| goto out_free; |
| } |
| } |
| |
| return i2c; |
| out_free: |
| kfree(i2c); |
| return NULL; |
| |
| } |
| |
| struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev, |
| struct radeon_i2c_bus_rec *rec, |
| const char *name) |
| { |
| struct radeon_i2c_chan *i2c; |
| int ret; |
| |
| i2c = kzalloc(sizeof(struct radeon_i2c_chan), GFP_KERNEL); |
| if (i2c == NULL) |
| return NULL; |
| |
| i2c->rec = *rec; |
| i2c->adapter.owner = THIS_MODULE; |
| i2c->dev = dev; |
| i2c_set_adapdata(&i2c->adapter, i2c); |
| i2c->adapter.algo_data = &i2c->algo.dp; |
| i2c->algo.dp.aux_ch = radeon_dp_i2c_aux_ch; |
| i2c->algo.dp.address = 0; |
| ret = i2c_dp_aux_add_bus(&i2c->adapter); |
| if (ret) { |
| DRM_INFO("Failed to register i2c %s\n", name); |
| goto out_free; |
| } |
| |
| return i2c; |
| out_free: |
| kfree(i2c); |
| return NULL; |
| |
| } |
| |
| void radeon_i2c_destroy(struct radeon_i2c_chan *i2c) |
| { |
| if (!i2c) |
| return; |
| i2c_del_adapter(&i2c->adapter); |
| kfree(i2c); |
| } |
| |
| /* Add the default buses */ |
| void radeon_i2c_init(struct radeon_device *rdev) |
| { |
| if (rdev->is_atom_bios) |
| radeon_atombios_i2c_init(rdev); |
| else |
| radeon_combios_i2c_init(rdev); |
| } |
| |
| /* remove all the buses */ |
| void radeon_i2c_fini(struct radeon_device *rdev) |
| { |
| int i; |
| |
| for (i = 0; i < RADEON_MAX_I2C_BUS; i++) { |
| if (rdev->i2c_bus[i]) { |
| radeon_i2c_destroy(rdev->i2c_bus[i]); |
| rdev->i2c_bus[i] = NULL; |
| } |
| } |
| } |
| |
| /* Add additional buses */ |
| void radeon_i2c_add(struct radeon_device *rdev, |
| struct radeon_i2c_bus_rec *rec, |
| const char *name) |
| { |
| struct drm_device *dev = rdev->ddev; |
| int i; |
| |
| for (i = 0; i < RADEON_MAX_I2C_BUS; i++) { |
| if (!rdev->i2c_bus[i]) { |
| rdev->i2c_bus[i] = radeon_i2c_create(dev, rec, name); |
| return; |
| } |
| } |
| } |
| |
| /* looks up bus based on id */ |
| struct radeon_i2c_chan *radeon_i2c_lookup(struct radeon_device *rdev, |
| struct radeon_i2c_bus_rec *i2c_bus) |
| { |
| int i; |
| |
| for (i = 0; i < RADEON_MAX_I2C_BUS; i++) { |
| if (rdev->i2c_bus[i] && |
| (rdev->i2c_bus[i]->rec.i2c_id == i2c_bus->i2c_id)) { |
| return rdev->i2c_bus[i]; |
| } |
| } |
| return NULL; |
| } |
| |
| struct drm_encoder *radeon_best_encoder(struct drm_connector *connector) |
| { |
| return NULL; |
| } |
| |
| void radeon_i2c_get_byte(struct radeon_i2c_chan *i2c_bus, |
| u8 slave_addr, |
| u8 addr, |
| u8 *val) |
| { |
| u8 out_buf[2]; |
| u8 in_buf[2]; |
| struct i2c_msg msgs[] = { |
| { |
| .addr = slave_addr, |
| .flags = 0, |
| .len = 1, |
| .buf = out_buf, |
| }, |
| { |
| .addr = slave_addr, |
| .flags = I2C_M_RD, |
| .len = 1, |
| .buf = in_buf, |
| } |
| }; |
| |
| out_buf[0] = addr; |
| out_buf[1] = 0; |
| |
| if (i2c_transfer(&i2c_bus->adapter, msgs, 2) == 2) { |
| *val = in_buf[0]; |
| DRM_DEBUG("val = 0x%02x\n", *val); |
| } else { |
| DRM_ERROR("i2c 0x%02x 0x%02x read failed\n", |
| addr, *val); |
| } |
| } |
| |
| void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c_bus, |
| u8 slave_addr, |
| u8 addr, |
| u8 val) |
| { |
| uint8_t out_buf[2]; |
| struct i2c_msg msg = { |
| .addr = slave_addr, |
| .flags = 0, |
| .len = 2, |
| .buf = out_buf, |
| }; |
| |
| out_buf[0] = addr; |
| out_buf[1] = val; |
| |
| if (i2c_transfer(&i2c_bus->adapter, &msg, 1) != 1) |
| DRM_ERROR("i2c 0x%02x 0x%02x write failed\n", |
| addr, val); |
| } |
| |
| /* router switching */ |
| void radeon_router_select_port(struct radeon_connector *radeon_connector) |
| { |
| u8 val; |
| |
| if (!radeon_connector->router.valid) |
| return; |
| |
| radeon_i2c_get_byte(radeon_connector->router_bus, |
| radeon_connector->router.i2c_addr, |
| 0x3, &val); |
| val &= radeon_connector->router.mux_control_pin; |
| radeon_i2c_put_byte(radeon_connector->router_bus, |
| radeon_connector->router.i2c_addr, |
| 0x3, val); |
| radeon_i2c_get_byte(radeon_connector->router_bus, |
| radeon_connector->router.i2c_addr, |
| 0x1, &val); |
| val &= radeon_connector->router.mux_control_pin; |
| val |= radeon_connector->router.mux_state; |
| radeon_i2c_put_byte(radeon_connector->router_bus, |
| radeon_connector->router.i2c_addr, |
| 0x1, val); |
| } |
| |