| config SIBYTE_SB1250 |
| bool |
| select HW_HAS_PCI |
| select SIBYTE_ENABLE_LDT_IF_PCI |
| select SIBYTE_HAS_ZBUS_PROFILING |
| select SIBYTE_SB1xxx_SOC |
| select SYS_SUPPORTS_SMP |
| |
| config SIBYTE_BCM1120 |
| bool |
| select SIBYTE_BCM112X |
| select SIBYTE_HAS_ZBUS_PROFILING |
| select SIBYTE_SB1xxx_SOC |
| |
| config SIBYTE_BCM1125 |
| bool |
| select HW_HAS_PCI |
| select SIBYTE_BCM112X |
| select SIBYTE_HAS_ZBUS_PROFILING |
| select SIBYTE_SB1xxx_SOC |
| |
| config SIBYTE_BCM1125H |
| bool |
| select HW_HAS_PCI |
| select SIBYTE_BCM112X |
| select SIBYTE_ENABLE_LDT_IF_PCI |
| select SIBYTE_HAS_ZBUS_PROFILING |
| select SIBYTE_SB1xxx_SOC |
| |
| config SIBYTE_BCM112X |
| bool |
| select SIBYTE_SB1xxx_SOC |
| select SIBYTE_HAS_ZBUS_PROFILING |
| |
| config SIBYTE_BCM1x80 |
| bool |
| select HW_HAS_PCI |
| select SIBYTE_HAS_ZBUS_PROFILING |
| select SIBYTE_SB1xxx_SOC |
| select SYS_SUPPORTS_SMP |
| |
| config SIBYTE_BCM1x55 |
| bool |
| select HW_HAS_PCI |
| select SIBYTE_SB1xxx_SOC |
| select SIBYTE_HAS_ZBUS_PROFILING |
| select SYS_SUPPORTS_SMP |
| |
| config SIBYTE_SB1xxx_SOC |
| bool |
| depends on EXPERIMENTAL |
| select DMA_COHERENT |
| select SIBYTE_CFE |
| select SWAP_IO_SPACE |
| select SYS_SUPPORTS_32BIT_KERNEL |
| select SYS_SUPPORTS_64BIT_KERNEL |
| |
| choice |
| prompt "SiByte SOC Stepping" |
| depends on SIBYTE_SB1xxx_SOC |
| |
| config CPU_SB1_PASS_1 |
| bool "1250 Pass1" |
| depends on SIBYTE_SB1250 |
| select CPU_HAS_PREFETCH |
| |
| config CPU_SB1_PASS_2_1250 |
| bool "1250 An" |
| depends on SIBYTE_SB1250 |
| select CPU_SB1_PASS_2 |
| help |
| Also called BCM1250 Pass 2 |
| |
| config CPU_SB1_PASS_2_2 |
| bool "1250 Bn" |
| depends on SIBYTE_SB1250 |
| select CPU_HAS_PREFETCH |
| help |
| Also called BCM1250 Pass 2.2 |
| |
| config CPU_SB1_PASS_4 |
| bool "1250 Cn" |
| depends on SIBYTE_SB1250 |
| select CPU_HAS_PREFETCH |
| help |
| Also called BCM1250 Pass 3 |
| |
| config CPU_SB1_PASS_2_112x |
| bool "112x Hybrid" |
| depends on SIBYTE_BCM112X |
| select CPU_SB1_PASS_2 |
| |
| config CPU_SB1_PASS_3 |
| bool "112x An" |
| depends on SIBYTE_BCM112X |
| select CPU_HAS_PREFETCH |
| |
| endchoice |
| |
| config CPU_SB1_PASS_2 |
| bool |
| |
| config SIBYTE_HAS_LDT |
| bool |
| |
| config SIBYTE_ENABLE_LDT_IF_PCI |
| bool |
| select SIBYTE_HAS_LDT if PCI |
| |
| config SIMULATION |
| bool "Running under simulation" |
| depends on SIBYTE_SB1xxx_SOC |
| help |
| Build a kernel suitable for running under the GDB simulator. |
| Primarily adjusts the kernel's notion of time. |
| |
| config SB1_CEX_ALWAYS_FATAL |
| bool "All cache exceptions considered fatal (no recovery attempted)" |
| depends on SIBYTE_SB1xxx_SOC |
| |
| config SB1_CERR_STALL |
| bool "Stall (rather than panic) on fatal cache error" |
| depends on SIBYTE_SB1xxx_SOC |
| |
| config SIBYTE_CFE |
| bool "Booting from CFE" |
| depends on SIBYTE_SB1xxx_SOC |
| select SYS_HAS_EARLY_PRINTK |
| help |
| Make use of the CFE API for enumerating available memory, |
| controlling secondary CPUs, and possibly console output. |
| |
| config SIBYTE_CFE_CONSOLE |
| bool "Use firmware console" |
| depends on SIBYTE_CFE |
| help |
| Use the CFE API's console write routines during boot. Other console |
| options (VT console, sb1250 duart console, etc.) should not be |
| configured. |
| |
| config SIBYTE_STANDALONE |
| bool |
| depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE |
| select SYS_HAS_EARLY_PRINTK |
| default y |
| |
| config SIBYTE_STANDALONE_RAM_SIZE |
| int "Memory size (in megabytes)" |
| depends on SIBYTE_STANDALONE |
| default "32" |
| |
| config SIBYTE_BUS_WATCHER |
| bool "Support for Bus Watcher statistics" |
| depends on SIBYTE_SB1xxx_SOC |
| help |
| Handle and keep statistics on the bus error interrupts (COR_ECC, |
| BAD_ECC, IO_BUS). |
| |
| config SIBYTE_BW_TRACE |
| bool "Capture bus trace before bus error" |
| depends on SIBYTE_BUS_WATCHER |
| help |
| Run a continuous bus trace, dumping the raw data as soon as |
| a ZBbus error is detected. Cannot work if ZBbus profiling |
| is turned on, and also will interfere with JTAG-based trace |
| buffer activity. Raw buffer data is dumped to console, and |
| must be processed off-line. |
| |
| config SIBYTE_SB1250_PROF |
| bool "Support for SB1/SOC profiling - SB1/SCD perf counters" |
| depends on SIBYTE_SB1xxx_SOC |
| |
| config SIBYTE_TBPROF |
| tristate "Support for ZBbus profiling" |
| depends on SIBYTE_HAS_ZBUS_PROFILING |
| |
| config SIBYTE_HAS_ZBUS_PROFILING |
| bool |