| /* |
| * RouterBoard 500 Platform devices |
| * |
| * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ctype.h> |
| #include <linux/string.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/input.h> |
| |
| #include <asm/bootinfo.h> |
| |
| #include <asm/mach-rc32434/rc32434.h> |
| #include <asm/mach-rc32434/dma.h> |
| #include <asm/mach-rc32434/dma_v.h> |
| #include <asm/mach-rc32434/eth.h> |
| #include <asm/mach-rc32434/rb.h> |
| #include <asm/mach-rc32434/integ.h> |
| #include <asm/mach-rc32434/gpio.h> |
| #include <asm/mach-rc32434/irq.h> |
| |
| #define ETH0_RX_DMA_ADDR (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET) |
| #define ETH0_TX_DMA_ADDR (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET) |
| |
| static struct resource korina_dev0_res[] = { |
| { |
| .name = "korina_regs", |
| .start = ETH0_BASE_ADDR, |
| .end = ETH0_BASE_ADDR + sizeof(struct eth_regs), |
| .flags = IORESOURCE_MEM, |
| }, { |
| .name = "korina_rx", |
| .start = ETH0_DMA_RX_IRQ, |
| .end = ETH0_DMA_RX_IRQ, |
| .flags = IORESOURCE_IRQ |
| }, { |
| .name = "korina_tx", |
| .start = ETH0_DMA_TX_IRQ, |
| .end = ETH0_DMA_TX_IRQ, |
| .flags = IORESOURCE_IRQ |
| }, { |
| .name = "korina_ovr", |
| .start = ETH0_RX_OVR_IRQ, |
| .end = ETH0_RX_OVR_IRQ, |
| .flags = IORESOURCE_IRQ |
| }, { |
| .name = "korina_und", |
| .start = ETH0_TX_UND_IRQ, |
| .end = ETH0_TX_UND_IRQ, |
| .flags = IORESOURCE_IRQ |
| }, { |
| .name = "korina_dma_rx", |
| .start = ETH0_RX_DMA_ADDR, |
| .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .name = "korina_dma_tx", |
| .start = ETH0_TX_DMA_ADDR, |
| .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct korina_device korina_dev0_data = { |
| .name = "korina0", |
| .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee} |
| }; |
| |
| static struct platform_device korina_dev0 = { |
| .id = -1, |
| .name = "korina", |
| .dev.platform_data = &korina_dev0_data, |
| .resource = korina_dev0_res, |
| .num_resources = ARRAY_SIZE(korina_dev0_res), |
| }; |
| |
| static struct resource cf_slot0_res[] = { |
| { |
| .name = "cf_membase", |
| .flags = IORESOURCE_MEM |
| }, { |
| .name = "cf_irq", |
| .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */ |
| .end = (8 + 4 * 32 + CF_GPIO_NUM), |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct cf_device cf_slot0_data = { |
| .gpio_pin = CF_GPIO_NUM |
| }; |
| |
| static struct platform_device cf_slot0 = { |
| .id = -1, |
| .name = "pata-rb532-cf", |
| .dev.platform_data = &cf_slot0_data, |
| .resource = cf_slot0_res, |
| .num_resources = ARRAY_SIZE(cf_slot0_res), |
| }; |
| |
| /* Resources and device for NAND */ |
| static int rb532_dev_ready(struct mtd_info *mtd) |
| { |
| return gpio_get_value(GPIO_RDY); |
| } |
| |
| static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) |
| { |
| struct nand_chip *chip = mtd->priv; |
| unsigned char orbits, nandbits; |
| |
| if (ctrl & NAND_CTRL_CHANGE) { |
| orbits = (ctrl & NAND_CLE) << 1; |
| orbits |= (ctrl & NAND_ALE) >> 1; |
| |
| nandbits = (~ctrl & NAND_CLE) << 1; |
| nandbits |= (~ctrl & NAND_ALE) >> 1; |
| |
| set_latch_u5(orbits, nandbits); |
| } |
| if (cmd != NAND_CMD_NONE) |
| writeb(cmd, chip->IO_ADDR_W); |
| } |
| |
| static struct resource nand_slot0_res[] = { |
| [0] = { |
| .name = "nand_membase", |
| .flags = IORESOURCE_MEM |
| } |
| }; |
| |
| static struct platform_nand_data rb532_nand_data = { |
| .ctrl.dev_ready = rb532_dev_ready, |
| .ctrl.cmd_ctrl = rb532_cmd_ctrl, |
| }; |
| |
| static struct platform_device nand_slot0 = { |
| .name = "gen_nand", |
| .id = -1, |
| .resource = nand_slot0_res, |
| .num_resources = ARRAY_SIZE(nand_slot0_res), |
| .dev.platform_data = &rb532_nand_data, |
| }; |
| |
| static struct mtd_partition rb532_partition_info[] = { |
| { |
| .name = "Routerboard NAND boot", |
| .offset = 0, |
| .size = 4 * 1024 * 1024, |
| }, { |
| .name = "rootfs", |
| .offset = MTDPART_OFS_NXTBLK, |
| .size = MTDPART_SIZ_FULL, |
| } |
| }; |
| |
| static struct platform_device rb532_led = { |
| .name = "rb532-led", |
| .id = -1, |
| }; |
| |
| static struct gpio_keys_button rb532_gpio_btn[] = { |
| { |
| .gpio = 1, |
| .code = BTN_0, |
| .desc = "S1", |
| .active_low = 1, |
| } |
| }; |
| |
| static struct gpio_keys_platform_data rb532_gpio_btn_data = { |
| .buttons = rb532_gpio_btn, |
| .nbuttons = ARRAY_SIZE(rb532_gpio_btn), |
| }; |
| |
| static struct platform_device rb532_button = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &rb532_gpio_btn_data, |
| } |
| }; |
| |
| static struct resource rb532_wdt_res[] = { |
| { |
| .name = "rb532_wdt_res", |
| .start = INTEG0_BASE_ADDR, |
| .end = INTEG0_BASE_ADDR + sizeof(struct integ), |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device rb532_wdt = { |
| .name = "rc32434_wdt", |
| .id = -1, |
| .resource = rb532_wdt_res, |
| .num_resources = ARRAY_SIZE(rb532_wdt_res), |
| }; |
| |
| static struct platform_device *rb532_devs[] = { |
| &korina_dev0, |
| &nand_slot0, |
| &cf_slot0, |
| &rb532_led, |
| &rb532_button, |
| &rb532_wdt |
| }; |
| |
| static void __init parse_mac_addr(char *macstr) |
| { |
| int i, j; |
| unsigned char result, value; |
| |
| for (i = 0; i < 6; i++) { |
| result = 0; |
| |
| if (i != 5 && *(macstr + 2) != ':') |
| return; |
| |
| for (j = 0; j < 2; j++) { |
| if (isxdigit(*macstr) |
| && (value = |
| isdigit(*macstr) ? *macstr - |
| '0' : toupper(*macstr) - 'A' + 10) < 16) { |
| result = result * 16 + value; |
| macstr++; |
| } else |
| return; |
| } |
| |
| macstr++; |
| korina_dev0_data.mac[i] = result; |
| } |
| } |
| |
| |
| /* NAND definitions */ |
| #define NAND_CHIP_DELAY 25 |
| |
| static void __init rb532_nand_setup(void) |
| { |
| switch (mips_machtype) { |
| case MACH_MIKROTIK_RB532A: |
| set_latch_u5(LO_FOFF | LO_CEX, |
| LO_ULED | LO_ALE | LO_CLE | LO_WPX); |
| break; |
| default: |
| set_latch_u5(LO_WPX | LO_FOFF | LO_CEX, |
| LO_ULED | LO_ALE | LO_CLE); |
| break; |
| } |
| |
| /* Setup NAND specific settings */ |
| rb532_nand_data.chip.nr_chips = 1; |
| rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info); |
| rb532_nand_data.chip.partitions = rb532_partition_info; |
| rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY; |
| rb532_nand_data.chip.options = NAND_NO_AUTOINCR; |
| } |
| |
| |
| static int __init plat_setup_devices(void) |
| { |
| /* Look for the CF card reader */ |
| if (!readl(IDT434_REG_BASE + DEV1MASK)) |
| rb532_devs[2] = NULL; /* disable cf_slot0 at index 2 */ |
| else { |
| cf_slot0_res[0].start = |
| readl(IDT434_REG_BASE + DEV1BASE); |
| cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000; |
| } |
| |
| /* Read the NAND resources from the device controller */ |
| nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE); |
| nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; |
| |
| /* Initialise the NAND device */ |
| rb532_nand_setup(); |
| |
| return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); |
| } |
| |
| static int __init setup_kmac(char *s) |
| { |
| printk(KERN_INFO "korina mac = %s\n", s); |
| parse_mac_addr(s); |
| return 0; |
| } |
| |
| __setup("kmac=", setup_kmac); |
| |
| arch_initcall(plat_setup_devices); |