| /* |
| * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/oprofile.h> |
| #include <linux/init.h> |
| #include <linux/smp.h> |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/processor.h> |
| #include <asm/cputable.h> |
| #include <asm/oprofile_impl.h> |
| |
| #define dbg(args...) |
| |
| static void ctrl_write(unsigned int i, unsigned int val) |
| { |
| unsigned int tmp = 0; |
| unsigned long shift = 0, mask = 0; |
| |
| dbg("ctrl_write %d %x\n", i, val); |
| |
| switch(i) { |
| case 0: |
| tmp = mfspr(SPRN_MMCR0); |
| shift = 6; |
| mask = 0x7F; |
| break; |
| case 1: |
| tmp = mfspr(SPRN_MMCR0); |
| shift = 0; |
| mask = 0x3F; |
| break; |
| case 2: |
| tmp = mfspr(SPRN_MMCR1); |
| shift = 31 - 4; |
| mask = 0x1F; |
| break; |
| case 3: |
| tmp = mfspr(SPRN_MMCR1); |
| shift = 31 - 9; |
| mask = 0x1F; |
| break; |
| case 4: |
| tmp = mfspr(SPRN_MMCR1); |
| shift = 31 - 14; |
| mask = 0x1F; |
| break; |
| case 5: |
| tmp = mfspr(SPRN_MMCR1); |
| shift = 31 - 19; |
| mask = 0x1F; |
| break; |
| case 6: |
| tmp = mfspr(SPRN_MMCR1); |
| shift = 31 - 24; |
| mask = 0x1F; |
| break; |
| case 7: |
| tmp = mfspr(SPRN_MMCR1); |
| shift = 31 - 28; |
| mask = 0xF; |
| break; |
| } |
| |
| tmp = tmp & ~(mask << shift); |
| tmp |= val << shift; |
| |
| switch(i) { |
| case 0: |
| case 1: |
| mtspr(SPRN_MMCR0, tmp); |
| break; |
| default: |
| mtspr(SPRN_MMCR1, tmp); |
| } |
| |
| dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0), |
| mfspr(SPRN_MMCR1)); |
| } |
| |
| static unsigned long reset_value[OP_MAX_COUNTER]; |
| |
| static int num_counters; |
| |
| static void rs64_reg_setup(struct op_counter_config *ctr, |
| struct op_system_config *sys, |
| int num_ctrs) |
| { |
| int i; |
| |
| num_counters = num_ctrs; |
| |
| for (i = 0; i < num_counters; ++i) |
| reset_value[i] = 0x80000000UL - ctr[i].count; |
| |
| /* XXX setup user and kernel profiling */ |
| } |
| |
| static void rs64_cpu_setup(struct op_counter_config *ctr) |
| { |
| unsigned int mmcr0; |
| |
| /* reset MMCR0 and set the freeze bit */ |
| mmcr0 = MMCR0_FC; |
| mtspr(SPRN_MMCR0, mmcr0); |
| |
| /* reset MMCR1, MMCRA */ |
| mtspr(SPRN_MMCR1, 0); |
| |
| if (cpu_has_feature(CPU_FTR_MMCRA)) |
| mtspr(SPRN_MMCRA, 0); |
| |
| mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE; |
| /* Only applies to POWER3, but should be safe on RS64 */ |
| mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE; |
| mtspr(SPRN_MMCR0, mmcr0); |
| |
| dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(), |
| mfspr(SPRN_MMCR0)); |
| dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(), |
| mfspr(SPRN_MMCR1)); |
| } |
| |
| static void rs64_start(struct op_counter_config *ctr) |
| { |
| int i; |
| unsigned int mmcr0; |
| |
| /* set the PMM bit (see comment below) */ |
| mtmsrd(mfmsr() | MSR_PMM); |
| |
| for (i = 0; i < num_counters; ++i) { |
| if (ctr[i].enabled) { |
| classic_ctr_write(i, reset_value[i]); |
| ctrl_write(i, ctr[i].event); |
| } else { |
| classic_ctr_write(i, 0); |
| } |
| } |
| |
| mmcr0 = mfspr(SPRN_MMCR0); |
| |
| /* |
| * now clear the freeze bit, counting will not start until we |
| * rfid from this excetion, because only at that point will |
| * the PMM bit be cleared |
| */ |
| mmcr0 &= ~MMCR0_FC; |
| mtspr(SPRN_MMCR0, mmcr0); |
| |
| dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); |
| } |
| |
| static void rs64_stop(void) |
| { |
| unsigned int mmcr0; |
| |
| /* freeze counters */ |
| mmcr0 = mfspr(SPRN_MMCR0); |
| mmcr0 |= MMCR0_FC; |
| mtspr(SPRN_MMCR0, mmcr0); |
| |
| dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0); |
| |
| mb(); |
| } |
| |
| static void rs64_handle_interrupt(struct pt_regs *regs, |
| struct op_counter_config *ctr) |
| { |
| unsigned int mmcr0; |
| int is_kernel; |
| int val; |
| int i; |
| unsigned long pc = mfspr(SPRN_SIAR); |
| |
| is_kernel = is_kernel_addr(pc); |
| |
| /* set the PMM bit (see comment below) */ |
| mtmsrd(mfmsr() | MSR_PMM); |
| |
| for (i = 0; i < num_counters; ++i) { |
| val = classic_ctr_read(i); |
| if (val < 0) { |
| if (ctr[i].enabled) { |
| oprofile_add_ext_sample(pc, regs, i, is_kernel); |
| classic_ctr_write(i, reset_value[i]); |
| } else { |
| classic_ctr_write(i, 0); |
| } |
| } |
| } |
| |
| mmcr0 = mfspr(SPRN_MMCR0); |
| |
| /* reset the perfmon trigger */ |
| mmcr0 |= MMCR0_PMXE; |
| |
| /* |
| * now clear the freeze bit, counting will not start until we |
| * rfid from this exception, because only at that point will |
| * the PMM bit be cleared |
| */ |
| mmcr0 &= ~MMCR0_FC; |
| mtspr(SPRN_MMCR0, mmcr0); |
| } |
| |
| struct op_powerpc_model op_model_rs64 = { |
| .reg_setup = rs64_reg_setup, |
| .cpu_setup = rs64_cpu_setup, |
| .start = rs64_start, |
| .stop = rs64_stop, |
| .handle_interrupt = rs64_handle_interrupt, |
| }; |