| /* |
| * Copyright (c) 2012, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| qcom,cam_server { |
| compatible = "qcom,cam_server"; |
| reg = <0xfd8C0000 0x10000>; |
| reg-names = "server"; |
| }; |
| |
| qcom,csiphy@fda0ac00 { |
| cell-index = <0>; |
| compatible = "qcom,csiphy"; |
| reg = <0xfda0ac00 0x200>; |
| reg-names = "csiphy"; |
| interrupts = <0 78 0>; |
| interrupt-names = "csiphy"; |
| }; |
| |
| qcom,csiphy@fda0b000 { |
| cell-index = <1>; |
| compatible = "qcom,csiphy"; |
| reg = <0xfda0b000 0x200>; |
| reg-names = "csiphy"; |
| interrupts = <0 79 0>; |
| interrupt-names = "csiphy"; |
| }; |
| |
| qcom,csiphy@fda0b400 { |
| cell-index = <2>; |
| compatible = "qcom,csiphy"; |
| reg = <0xfda0b400 0x200>; |
| reg-names = "csiphy"; |
| interrupts = <0 80 0>; |
| interrupt-names = "csiphy"; |
| }; |
| |
| qcom,csid@fda08000 { |
| cell-index = <0>; |
| compatible = "qcom,csid"; |
| reg = <0xfda08000 0x100>; |
| reg-names = "csid"; |
| interrupts = <0 51 0>; |
| interrupt-names = "csid"; |
| mipi_csi_vdd-supply = <&pm8941_l12>; |
| }; |
| |
| qcom,csid@fda08400 { |
| cell-index = <1>; |
| compatible = "qcom,csid"; |
| reg = <0xfda08400 0x100>; |
| reg-names = "csid"; |
| interrupts = <0 52 0>; |
| interrupt-names = "csid"; |
| mipi_csi_vdd-supply = <&pm8941_l12>; |
| }; |
| |
| qcom,csid@fda08800 { |
| cell-index = <2>; |
| compatible = "qcom,csid"; |
| reg = <0xfda08800 0x100>; |
| reg-names = "csid"; |
| interrupts = <0 53 0>; |
| interrupt-names = "csid"; |
| mipi_csi_vdd-supply = <&pm8941_l12>; |
| }; |
| |
| qcom,csid@fda08C00 { |
| cell-index = <3>; |
| compatible = "qcom,csid"; |
| reg = <0xfda08C00 0x100>; |
| reg-names = "csid"; |
| interrupts = <0 54 0>; |
| interrupt-names = "csid"; |
| mipi_csi_vdd-supply = <&pm8941_l12>; |
| }; |
| |
| qcom,ispif@fda0A000 { |
| cell-index = <0>; |
| compatible = "qcom,ispif"; |
| reg = <0xfda0A000 0x300>; |
| reg-names = "ispif"; |
| interrupts = <0 55 0>; |
| interrupt-names = "ispif"; |
| }; |
| |
| qcom,vfe@fda10000 { |
| cell-index = <0>; |
| compatible = "qcom,vfe40"; |
| reg = <0xfda10000 0x1000>, |
| <0xfda40000 0x200>; |
| reg-names = "vfe", "vfe_vbif"; |
| interrupts = <0 57 0>; |
| interrupt-names = "vfe"; |
| vdd-supply = <&gdsc_vfe>; |
| }; |
| |
| qcom,vfe@fda14000 { |
| cell-index = <1>; |
| compatible = "qcom,vfe40"; |
| reg = <0xfda14000 0x1000>, |
| <0xfda40000 0x200>; |
| reg-names = "vfe", "vfe_vbif"; |
| interrupts = <0 58 0>; |
| interrupt-names = "vfe"; |
| vdd-supply = <&gdsc_vfe>; |
| }; |
| |
| qcom,jpeg@fda1c000 { |
| cell-index = <0>; |
| compatible = "qcom,jpeg"; |
| reg = <0xfda1c000 0x400>; |
| reg-names = "jpeg"; |
| interrupts = <0 59 0>; |
| interrupt-names = "jpeg"; |
| vdd-supply = <&gdsc_jpeg>; |
| }; |
| |
| qcom,jpeg@fda20000 { |
| cell-index = <1>; |
| compatible = "qcom,jpeg"; |
| reg = <0xfda20000 0x400>; |
| reg-names = "jpeg"; |
| interrupts = <0 60 0>; |
| interrupt-names = "jpeg"; |
| vdd-supply = <&gdsc_jpeg>; |
| }; |
| |
| qcom,jpeg@fda24000 { |
| cell-index = <2>; |
| compatible = "qcom,jpeg"; |
| reg = <0xfda24000 0x400>; |
| reg-names = "jpeg"; |
| interrupts = <0 61 0>; |
| interrupt-names = "jpeg"; |
| vdd-supply = <&gdsc_jpeg>; |
| }; |
| |
| qcom,irqrouter@fda00000 { |
| cell-index = <0>; |
| compatible = "qcom,irqrouter"; |
| reg = <0xfda00000 0x100>; |
| reg-names = "irqrouter"; |
| }; |
| |
| qcom,cpp@fda04000 { |
| cell-index = <0>; |
| compatible = "qcom,cpp"; |
| reg = <0xfda04000 0x100>; |
| reg-names = "cpp"; |
| interrupts = <0 49 0>; |
| interrupt-names = "cpp"; |
| vdd-supply = <&gdsc_vfe>; |
| }; |
| |
| qcom,cci@fda0C000 { |
| cell-index = <0>; |
| compatible = "qcom,cci"; |
| reg = <0xfda0C000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| reg-names = "cci"; |
| interrupts = <0 50 0>; |
| interrupt-names = "cci"; |
| |
| qcom,camera@6e { |
| compatible = "qcom,s5k3l1yx"; |
| reg = <0x6e 0x0>; |
| qcom,csi-if = <1>; |
| qcom,csid-core = <0>; |
| qcom,flash-type = <0>; |
| qcom,mount-angle = <90>; |
| qcom,sensor-name = "s5k3l1yx"; |
| cam_vdig-supply = <&pm8941_l3>; |
| cam_vana-supply = <&pm8941_l17>; |
| cam_vio-supply = <&pm8941_lvs3>; |
| cam_vaf-supply = <&pm8941_l23>; |
| qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio", |
| "cam_vaf"; |
| qcom,cam-vreg-type = <0 0 1 0>; |
| qcom,cam-vreg-min-voltage = <1225000 2850000 0 3000000>; |
| qcom,cam-vreg-max-voltage = <1225000 2850000 0 3000000>; |
| qcom,cam-vreg-op-mode = <105000 80000 0 100000>; |
| qcom,gpio-no-mux = <0>; |
| gpios = <&msmgpio 15 0>, |
| <&msmgpio 19 0>, |
| <&msmgpio 20 0>, |
| <&msmgpio 90 0>; |
| qcom,gpio-common-tbl-num = <0 1 2>; |
| qcom,gpio-common-tbl-flags = <1 1 1>; |
| qcom,gpio-common-tbl-label = "CAMIF_MCLK", |
| "CAMIF_I2C_DATA", |
| "CAMIF_I2C_CLK"; |
| qcom,gpio-req-tbl-num = <3>; |
| qcom,gpio-req-tbl-flags = <0>; |
| qcom,gpio-req-tbl-label = "CAM_RESET1"; |
| qcom,gpio-set-tbl-num = <3 3>; |
| qcom,gpio-set-tbl-flags = <0 2>; |
| qcom,gpio-set-tbl-delay = <1000 30000>; |
| qcom,csi-lane-assign = <0x4320>; |
| qcom,csi-lane-mask = <0x1F>; |
| qcom,csi-phy-sel = <0>; |
| qcom,camera-type = <0>; |
| qcom,sensor-type = <0>; |
| }; |
| |
| qcom,camera@6c { |
| compatible = "qcom,ov2720"; |
| reg = <0x6c 0x0>; |
| qcom,csi-if = <1>; |
| qcom,csid-core = <0>; |
| qcom,flash-type = <0>; |
| qcom,mount-angle = <0>; |
| qcom,sensor-name = "ov2720"; |
| cam_vdig-supply = <&pm8941_l3>; |
| cam_vana-supply = <&pm8941_l17>; |
| cam_vio-supply = <&pm8941_lvs3>; |
| qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio"; |
| qcom,cam-vreg-type = <0 0 1>; |
| qcom,cam-vreg-min-voltage = <1225000 2850000 0>; |
| qcom,cam-vreg-max-voltage = <1225000 2850000 0>; |
| qcom,cam-vreg-op-mode = <105000 80000 0>; |
| qcom,gpio-no-mux = <0>; |
| gpios = <&msmgpio 16 0>, |
| <&msmgpio 19 0>, |
| <&msmgpio 20 0>, |
| <&msmgpio 92 0>; |
| qcom,gpio-common-tbl-num = <0 1 2>; |
| qcom,gpio-common-tbl-flags = <1 1 1>; |
| qcom,gpio-common-tbl-label = "CAMIF_MCLK", |
| "CAMIF_I2C_DATA", |
| "CAMIF_I2C_CLK"; |
| qcom,gpio-req-tbl-num = <3>; |
| qcom,gpio-req-tbl-flags = <0>; |
| qcom,gpio-req-tbl-label = "CAM_RESET1"; |
| qcom,gpio-set-tbl-num = <3 3>; |
| qcom,gpio-set-tbl-flags = <0 2>; |
| qcom,gpio-set-tbl-delay = <1000 4000>; |
| qcom,csi-lane-assign = <0x4320>; |
| qcom,csi-lane-mask = <0x7>; |
| qcom,csi-phy-sel = <1>; |
| qcom,camera-type = <1>; |
| qcom,sensor-type = <0>; |
| }; |
| |
| qcom,camera@90 { |
| compatible = "qcom,mt9m114"; |
| reg = <0x90 0x0>; |
| qcom,csi-if = <1>; |
| qcom,csid-core = <0>; |
| qcom,flash-type = <0>; |
| qcom,mount-angle = <0>; |
| qcom,sensor-name = "mt9m114"; |
| cam_vdig-supply = <&pm8941_l3>; |
| cam_vana-supply = <&pm8941_l17>; |
| cam_vio-supply = <&pm8941_lvs3>; |
| qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio"; |
| qcom,cam-vreg-type = <0 0 1>; |
| qcom,cam-vreg-min-voltage = <1225000 2850000 0>; |
| qcom,cam-vreg-max-voltage = <1225000 2850000 0>; |
| qcom,cam-vreg-op-mode = <105000 80000 0>; |
| qcom,gpio-no-mux = <0>; |
| gpios = <&msmgpio 16 0>, |
| <&msmgpio 92 0>; |
| qcom,gpio-common-tbl-num = <0>; |
| qcom,gpio-common-tbl-flags = <1>; |
| qcom,gpio-common-tbl-label = "CAMIF_MCLK"; |
| qcom,gpio-req-tbl-num = <1>; |
| qcom,gpio-req-tbl-flags = <0>; |
| qcom,gpio-req-tbl-label = "CAM_RESET1"; |
| qcom,gpio-set-tbl-num = <1 1>; |
| qcom,gpio-set-tbl-flags = <0 2>; |
| qcom,gpio-set-tbl-delay = <1000 4000>; |
| qcom,csi-lane-assign = <0x4320>; |
| qcom,csi-lane-mask = <0x3>; |
| qcom,csi-phy-sel = <1>; |
| qcom,camera-type = <1>; |
| qcom,sensor-type = <1>; |
| }; |
| }; |
| }; |